diff options
Diffstat (limited to 'arch/arm')
113 files changed, 2452 insertions, 639 deletions
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 9e6e512f0117..17153b54613b 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -29,7 +29,6 @@ unsigned int __machine_arch_type; static void putstr(const char *ptr); -#include <linux/compiler.h> #include <mach/uncompress.h> #ifdef CONFIG_DEBUG_ICEDCC diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index f37afd9422f3..aae5bc01acc8 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -17,6 +17,7 @@ #include <linux/err.h> #include <linux/string.h> #include <linux/mutex.h> +#include <linux/clk.h> #include <asm/clkdev.h> #include <mach/clkdev.h> diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 0a1abb978d7e..af74cc2de8b6 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -629,7 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y -# CONFIG_SATA_AHCI is not set +CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig index 083516cd0d7f..75263a83741c 100644 --- a/arch/arm/configs/mx27_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -1,15 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc1 -# Wed Apr 8 10:18:06 2009 +# Linux kernel version: 2.6.31-rc4 +# Fri Jul 24 16:08:06 2009 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -85,7 +84,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -99,6 +103,12 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -111,7 +121,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,13 +148,14 @@ CONFIG_FREEZER=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -153,25 +164,25 @@ CONFIG_FREEZER=y # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations @@ -188,6 +199,8 @@ CONFIG_MACH_MX27=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_PCM970_BASEBOARD=y +CONFIG_MACH_MX27_3DS=y +CONFIG_MACH_MX27LITE=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y @@ -213,7 +226,6 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set CONFIG_COMMON_CLKDEV=y # @@ -238,7 +250,6 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -253,10 +264,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -361,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -474,7 +487,16 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_MXC=y # CONFIG_MTD_ONENAND is not set # @@ -485,7 +507,15 @@ CONFIG_MTD_PHYSMAP=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -494,7 +524,21 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -508,7 +552,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -534,6 +577,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set CONFIG_FEC=y # CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set @@ -580,6 +625,11 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -592,6 +642,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -644,6 +695,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_IMX=y # CONFIG_I2C_OCORES is not set @@ -668,7 +720,6 @@ CONFIG_I2C_IMX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -719,6 +770,7 @@ CONFIG_W1=y # # CONFIG_W1_MASTER_DS2482 is not set CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_DS1WM is not set # CONFIG_W1_MASTER_GPIO is not set # @@ -753,54 +805,16 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -# CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=y - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=y -CONFIG_MEDIA_TUNER_TDA8290=y -CONFIG_MEDIA_TUNER_TDA9887=y -CONFIG_MEDIA_TUNER_TEA5761=y -CONFIG_MEDIA_TUNER_TEA5767=y -CONFIG_MEDIA_TUNER_MT20XX=y -CONFIG_MEDIA_TUNER_XC2028=y -CONFIG_MEDIA_TUNER_XC5000=y -CONFIG_MEDIA_TUNER_MC44S803=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_SOC_CAMERA is not set -# CONFIG_RADIO_ADAPTERS is not set -# CONFIG_DAB is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -917,6 +931,7 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -962,12 +977,15 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -1021,6 +1039,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1119,25 +1143,11 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1151,16 +1161,104 @@ CONFIG_ARM_UNWIND=y # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y +CONFIG_RATIONAL=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1168,6 +1266,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 20ada526f6de..a4f9a2a8149c 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -1,15 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc1 -# Wed Apr 8 11:06:37 2009 +# Linux kernel version: 2.6.31-rc4 +# Tue Jul 28 14:11:34 2009 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -86,7 +85,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -97,6 +101,11 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -109,7 +118,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -136,13 +145,14 @@ CONFIG_FREEZER=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -151,25 +161,25 @@ CONFIG_FREEZER=y # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations @@ -178,6 +188,7 @@ CONFIG_ARCH_MXC=y # CONFIG_ARCH_MX2 is not set CONFIG_ARCH_MX3=y CONFIG_ARCH_MX31=y +CONFIG_ARCH_MX35=y # # MX3 platforms: @@ -185,12 +196,19 @@ CONFIG_ARCH_MX31=y CONFIG_MACH_MX31ADS=y CONFIG_MACH_MX31ADS_WM1133_EV1=y CONFIG_MACH_PCM037=y +CONFIG_MACH_PCM037_EET=y CONFIG_MACH_MX31LITE=y CONFIG_MACH_MX31_3DS=y CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_MX31LILLY=y CONFIG_MACH_QONG=y +CONFIG_MACH_PCM043=y +CONFIG_MACH_ARMADILLO5X0=y +CONFIG_MACH_MX35_3DS=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y +CONFIG_ARCH_HAS_RNGA=y +CONFIG_ARCH_MXC_IOMUX_V3=y # # Processor Type @@ -218,6 +236,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_L2X0=y +# CONFIG_ARM_ERRATA_411920 is not set CONFIG_COMMON_CLKDEV=y # @@ -242,7 +261,6 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -257,10 +275,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -362,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -465,7 +485,16 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_MXC=y # CONFIG_MTD_ONENAND is not set # @@ -476,10 +505,30 @@ CONFIG_MTD_PHYSMAP=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,7 +542,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -528,7 +576,7 @@ CONFIG_MII=y # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set CONFIG_SMSC911X=y -# CONFIG_DNET is not set +CONFIG_DNET=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -537,8 +585,10 @@ CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_CS89x0=y -CONFIG_CS89x0_NONISA_IRQ=y +# CONFIG_CS89x0 is not set +# CONFIG_KS8842 is not set +CONFIG_FEC=y +# CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -609,6 +659,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_IMX=y # CONFIG_I2C_OCORES is not set @@ -633,7 +684,6 @@ CONFIG_I2C_IMX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -669,6 +719,7 @@ CONFIG_W1=y # # CONFIG_W1_MASTER_DS2482 is not set CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_DS1WM is not set # CONFIG_W1_MASTER_GPIO is not set # @@ -703,6 +754,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set @@ -711,10 +764,8 @@ CONFIG_MFD_WM8350_CONFIG_MODE_0=y CONFIG_MFD_WM8352_CONFIG_MODE_0=y CONFIG_MFD_WM8350_I2C=y # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# +# CONFIG_AB3100_CORE is not set +CONFIG_MEDIA_SUPPORT=y # # Multimedia core support @@ -758,8 +809,10 @@ CONFIG_SOC_CAMERA_MT9T031=y CONFIG_SOC_CAMERA_MT9V022=y CONFIG_SOC_CAMERA_TW9910=y # CONFIG_SOC_CAMERA_PLATFORM is not set -# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_SOC_CAMERA_OV772X=y +CONFIG_MX3_VIDEO=y CONFIG_VIDEO_MX3=y +# CONFIG_VIDEO_SH_MOBILE_CEU is not set # CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set @@ -847,8 +900,11 @@ CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set CONFIG_REGULATOR_WM8350=y +# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -861,10 +917,12 @@ CONFIG_REGULATOR_WM8350=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -921,6 +979,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -937,6 +1001,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -979,22 +1044,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_ARM_UNWIND=y @@ -1094,9 +1144,9 @@ CONFIG_CRYPTO_DES=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set +CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ZLIB is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_LZO=y # # Random Number Generation @@ -1109,9 +1159,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_RATIONAL=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1119,6 +1170,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index 28be17fbc157..d5ff4776cd0a 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -1107,7 +1107,7 @@ CONFIG_USB_ZERO=m CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set # CONFIG_ISP1301_OMAP is not set -CONFIG_TWL4030_USB=y +# CONFIG_TWL4030_USB is not set # CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index eb2cb31825c0..f238df66efd4 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0" +CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -1354,7 +1354,7 @@ CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set # CONFIG_ISP1301_OMAP is not set CONFIG_TWL4030_USB=y -CONFIG_MMC=m +CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -1449,7 +1449,8 @@ CONFIG_RTC_DRV_TWL4030=m # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set # CONFIG_STAGING is not set diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 4762d9001298..7d61ae6e75da 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc1 -# Thu Jul 2 00:16:59 2009 +# Linux kernel version: 2.6.31-rc3 +# Thu Jul 16 23:36:10 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_HAVE_TCM=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -113,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -CONFIG_LBDAF=y +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -542,13 +541,14 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_LM8323 is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -911,7 +911,6 @@ CONFIG_REGULATOR=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set CONFIG_FILE_LOCKING=y @@ -1122,7 +1121,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 9e07fe507029..9ed2377fe8e5 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -159,8 +159,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) #else /* ARM_ARCH_6 */ -#include <asm/system.h> - #ifdef CONFIG_SMP #error SMP not supported on pre-ARMv6 CPUs #endif diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index ee1304f22f94..5ccce0a9b03c 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -201,7 +201,8 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn } struct membank { unsigned long start; unsigned long size; - int node; + unsigned short node; + unsigned short highmem; }; struct meminfo { diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 73394e50cbca..d3a39b1e6c0f 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -130,11 +130,13 @@ extern void vfp_sync_state(struct thread_info *thread); * TIF_SYSCALL_TRACE - syscall trace active * TIF_SIGPENDING - signal pending * TIF_NEED_RESCHED - rescheduling necessary + * TIF_NOTIFY_RESUME - callback before returning to user * TIF_USEDFPU - FPU was used by this task this quantum (SMP) * TIF_POLLING_NRFLAG - true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_SIGPENDING 0 #define TIF_NEED_RESCHED 1 +#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 @@ -143,6 +145,7 @@ extern void vfp_sync_state(struct thread_info *thread); #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 321c83e43a1e..f41a6f57cd12 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) } #define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) -#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep) -#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp) +#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep) +#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp) #define tlb_migrate_finish(mm) do { } while (0) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 366e5097a41a..7813ab782fda 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -51,7 +51,7 @@ fast_work_pending: work_pending: tst r1, #_TIF_NEED_RESCHED bne work_resched - tst r1, #_TIF_SIGPENDING + tst r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME beq no_work_pending mov r0, sp @ 'regs' mov r2, why @ 'syscall' @@ -148,7 +148,7 @@ trace: sub r0, r0, #MCOUNT_INSN_SIZE mov lr, pc mov pc, r2 - mov lr, r1 @ restore lr + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} #endif /* CONFIG_DYNAMIC_FTRACE */ diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 93bb4247b7ed..b76fe06d92e7 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -12,6 +12,7 @@ #include <linux/personality.h> #include <linux/freezer.h> #include <linux/uaccess.h> +#include <linux/tracehook.h> #include <asm/elf.h> #include <asm/cacheflush.h> @@ -133,7 +134,7 @@ sys_sigaction(int sig, const struct old_sigaction __user *act, } #ifdef CONFIG_CRUNCH -static int preserve_crunch_context(struct crunch_sigframe *frame) +static int preserve_crunch_context(struct crunch_sigframe __user *frame) { char kbuf[sizeof(*frame) + 8]; struct crunch_sigframe *kframe; @@ -146,7 +147,7 @@ static int preserve_crunch_context(struct crunch_sigframe *frame) return __copy_to_user(frame, kframe, sizeof(*frame)); } -static int restore_crunch_context(struct crunch_sigframe *frame) +static int restore_crunch_context(struct crunch_sigframe __user *frame) { char kbuf[sizeof(*frame) + 8]; struct crunch_sigframe *kframe; @@ -707,4 +708,11 @@ do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall) { if (thread_flags & _TIF_SIGPENDING) do_signal(¤t->blocked, regs, syscall); + + if (thread_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); + } } diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h new file mode 100644 index 000000000000..187cb58345c0 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at_hdmac.h @@ -0,0 +1,102 @@ +/* + * Header file for the Atmel AHB DMA Controller driver + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef AT_HDMAC_H +#define AT_HDMAC_H + +#include <linux/dmaengine.h> + +/** + * struct at_dma_platform_data - Controller configuration parameters + * @nr_channels: Number of channels supported by hardware (max 8) + * @cap_mask: dma_capability flags supported by the platform + */ +struct at_dma_platform_data { + unsigned int nr_channels; + dma_cap_mask_t cap_mask; +}; + +/** + * enum at_dma_slave_width - DMA slave register access width. + * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses + * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses + * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses + */ +enum at_dma_slave_width { + AT_DMA_SLAVE_WIDTH_8BIT = 0, + AT_DMA_SLAVE_WIDTH_16BIT, + AT_DMA_SLAVE_WIDTH_32BIT, +}; + +/** + * struct at_dma_slave - Controller-specific information about a slave + * @dma_dev: required DMA master device + * @tx_reg: physical address of data register used for + * memory-to-peripheral transfers + * @rx_reg: physical address of data register used for + * peripheral-to-memory transfers + * @reg_width: peripheral register width + * @cfg: Platform-specific initializer for the CFG register + * @ctrla: Platform-specific initializer for the CTRLA register + */ +struct at_dma_slave { + struct device *dma_dev; + dma_addr_t tx_reg; + dma_addr_t rx_reg; + enum at_dma_slave_width reg_width; + u32 cfg; + u32 ctrla; +}; + + +/* Platform-configurable bits in CFG */ +#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ +#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ +#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ +#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ +#define ATC_SRC_H2SEL_SW (0x0 << 9) +#define ATC_SRC_H2SEL_HW (0x1 << 9) +#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ +#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ +#define ATC_DST_H2SEL_SW (0x0 << 13) +#define ATC_DST_H2SEL_HW (0x1 << 13) +#define ATC_SOD (0x1 << 16) /* Stop On Done */ +#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ +#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ +#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */ +#define ATC_LOCK_IF_L_CHUNK (0x0 << 22) +#define ATC_LOCK_IF_L_BUFFER (0x1 << 22) +#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */ +#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */ +#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28) +#define ATC_FIFOCFG_HALFFIFO (0x1 << 28) +#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28) + +/* Platform-configurable bits in CTRLA */ +#define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */ +#define ATC_SCSIZE_1 (0x0 << 16) +#define ATC_SCSIZE_4 (0x1 << 16) +#define ATC_SCSIZE_8 (0x2 << 16) +#define ATC_SCSIZE_16 (0x3 << 16) +#define ATC_SCSIZE_32 (0x4 << 16) +#define ATC_SCSIZE_64 (0x5 << 16) +#define ATC_SCSIZE_128 (0x6 << 16) +#define ATC_SCSIZE_256 (0x7 << 16) +#define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */ +#define ATC_DCSIZE_1 (0x0 << 20) +#define ATC_DCSIZE_4 (0x1 << 20) +#define ATC_DCSIZE_8 (0x2 << 20) +#define ATC_DCSIZE_16 (0x3 << 20) +#define ATC_DCSIZE_32 (0x4 << 20) +#define ATC_DCSIZE_64 (0x5 << 20) +#define ATC_DCSIZE_128 (0x6 << 20) +#define ATC_DCSIZE_256 (0x7 << 20) + +#endif /* AT_HDMAC_H */ diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 5ac2f565d860..d6ab64ccd496 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -37,7 +37,6 @@ #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> -#include <mach/common.h> #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 28c9008df4f4..84ad5d161a87 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -36,7 +36,6 @@ #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> -#include <mach/common.h> #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index d9d40450bdc5..56c8cd01de9a 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -45,7 +45,6 @@ #include <mach/nand.h> #include <mach/mmc.h> #include <mach/emac.h> -#include <mach/common.h> #define DM644X_EVM_PHY_MASK (0x2) #define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index e17de6352624..8657e72debc1 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -47,7 +47,6 @@ #include <mach/i2c.h> #include <mach/mmc.h> #include <mach/emac.h> -#include <mach/common.h> #define DM646X_EVM_PHY_MASK (0x2) #define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 748a8e48541e..7acdfd8ac071 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -52,7 +52,6 @@ #include <mach/serial.h> #include <mach/psc.h> #include <mach/mux.h> -#include <mach/common.h> #define SFFSDR_PHY_MASK (0x2) #define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c index a2df5bb7dff0..dbcac9c40a28 100644 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ b/arch/arm/mach-ep93xx/dma-m2p.c @@ -33,6 +33,7 @@ #include <linux/err.h> #include <linux/interrupt.h> #include <linux/module.h> +#include <linux/io.h> #include <mach/dma.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h index 34ddec081c40..411734422c1d 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h @@ -41,9 +41,6 @@ #define TS72XX_OPTIONS2_TS9420_BOOT 0x02 -#define TS72XX_NOR_PHYS_BASE 0x60000000 -#define TS72XX_NOR2_PHYS_BASE 0x62000000 - #define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000 #define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000 #define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000 diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 7ee024d34829..aaf1371412af 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -112,13 +112,16 @@ static void __init ts72xx_map_io(void) } } +/************************************************************************* + * NOR flash (TS-7200 only) + *************************************************************************/ static struct physmap_flash_data ts72xx_flash_data = { - .width = 1, + .width = 2, }; static struct resource ts72xx_flash_resource = { - .start = TS72XX_NOR_PHYS_BASE, - .end = TS72XX_NOR_PHYS_BASE + SZ_16M - 1, + .start = EP93XX_CS6_PHYS_BASE, + .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, .flags = IORESOURCE_MEM, }; @@ -132,6 +135,12 @@ static struct platform_device ts72xx_flash = { .resource = &ts72xx_flash_resource, }; +static void __init ts72xx_register_flash(void) +{ + if (board_is_ts7200()) + platform_device_register(&ts72xx_flash); +} + static unsigned char ts72xx_rtc_readbyte(unsigned long addr) { __raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE); @@ -165,8 +174,7 @@ static struct ep93xx_eth_data ts72xx_eth_data = { static void __init ts72xx_init_machine(void) { ep93xx_init_devices(); - if (board_is_ts7200()) - platform_device_register(&ts72xx_flash); + ts72xx_register_flash(); platform_device_register(&ts72xx_rtc_device); ep93xx_register_eth(&ts72xx_eth_data, 1); diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index ce63048d45eb..8a947d42a6f1 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -17,7 +17,7 @@ #include <mach/hardware.h> -#define IO_SPACE_LIMIT 0xffff0000 +#define IO_SPACE_LIMIT 0x0000ffff extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index e021a80c2caf..bc74278ed311 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h @@ -289,7 +289,7 @@ #define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1 ) #define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP48_TDM_DTX MPP( 48. 0x2, 0, 1, 0, 0, 0, 1 ) +#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1 ) #define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1 ) #define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1 ) diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 01aa213c0a6f..ec1a64f263d2 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -206,6 +206,15 @@ static void __init qnap_ts219_init(void) } +static int __init ts219_pci_init(void) +{ + if (machine_is_ts219()) + kirkwood_pcie_init(); + + return 0; +} +subsys_initcall(ts219_pci_init); + MACHINE_START(TS219, "QNAP TS-119/TS-219") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ .phys_io = KIRKWOOD_REGS_PHYS_BASE, diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h index 1d640d075b7e..e0f911d9e021 100644 --- a/arch/arm/mach-ks8695/include/mach/hardware.h +++ b/arch/arm/mach-ks8695/include/mach/hardware.h @@ -17,6 +17,11 @@ #include <asm/sizes.h> /* + * Clocks are derived from MCLK, which is 25Mhz + */ +#define KS8695_CLOCK_RATE 25000000 + +/* * Physical RAM address. */ #define KS8695_SDRAM_PA 0x00000000 diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h index 4682e350369b..10f716371bd3 100644 --- a/arch/arm/mach-ks8695/include/mach/timex.h +++ b/arch/arm/mach-ks8695/include/mach/timex.h @@ -14,7 +14,8 @@ #ifndef __ASM_ARCH_TIMEX_H #define __ASM_ARCH_TIMEX_H -/* timers are derived from MCLK, which is 25MHz */ -#define CLOCK_TICK_RATE 25000000 +#include <mach/hardware.h> + +#define CLOCK_TICK_RATE KS8695_CLOCK_RATE #endif diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c index f5ebcc0fcab9..78499667eb7b 100644 --- a/arch/arm/mach-ks8695/pci.c +++ b/arch/arm/mach-ks8695/pci.c @@ -245,6 +245,9 @@ static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs static void __init ks8695_pci_preinit(void) { + /* make software reset to avoid freeze if PCI bus was messed up */ + __raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS); + /* stage 1 initialization, subid, subdevice = 0x0001 */ __raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID); diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 17a21a291e2f..851f2458bf65 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -36,6 +36,14 @@ config MACH_PCM037 Include support for Phytec pcm037 platform. This includes specific configurations for the board and its peripherals. +config MACH_PCM037_EET + bool "Support pcm037 EET board extensions" + depends on MACH_PCM037 + help + Add support for PCM037 EET baseboard extensions. If you are using the + OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel + command-line parameter. + config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 0322696bd11a..6b9775471be6 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o obj-$(CONFIG_MACH_PCM037) += pcm037.o +obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \ mx31moboard-marxbot.o diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c index 541181090b37..ee331fd6b1bd 100644 --- a/arch/arm/mach-mx3/armadillo5x0.c +++ b/arch/arm/mach-mx3/armadillo5x0.c @@ -31,6 +31,8 @@ #include <linux/smsc911x.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -46,8 +48,10 @@ #include <mach/mmc.h> #include <mach/ipu.h> #include <mach/mx3fb.h> +#include <mach/mxc_nand.h> #include "devices.h" +#include "crm_regs.h" static int armadillo5x0_pins[] = { /* UART1 */ @@ -93,7 +97,56 @@ static int armadillo5x0_pins[] = { MX31_PIN_FPSHIFT__FPSHIFT, MX31_PIN_DRDY0__DRDY0, IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/ +}; +/* + * NAND Flash + */ +static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = { + .width = 1, + .hw_ecc = 1, +}; + +/* + * MTD NOR Flash + */ +static struct mtd_partition armadillo5x0_nor_flash_partitions[] = { + { + .name = "nor.bootloader", + .offset = 0x00000000, + .size = 4*32*1024, + }, { + .name = "nor.kernel", + .offset = MTDPART_OFS_APPEND, + .size = 16*128*1024, + }, { + .name = "nor.userland", + .offset = MTDPART_OFS_APPEND, + .size = 110*128*1024, + }, { + .name = "nor.config", + .offset = MTDPART_OFS_APPEND, + .size = 1*128*1024, + }, +}; + +static struct physmap_flash_data armadillo5x0_nor_flash_pdata = { + .width = 2, + .parts = armadillo5x0_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions), +}; + +static struct resource armadillo5x0_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = CS0_BASE_ADDR, + .end = CS0_BASE_ADDR + SZ_64M - 1, +}; + +static struct platform_device armadillo5x0_nor_flash = { + .name = "physmap-flash", + .id = -1, + .num_resources = 1, + .resource = &armadillo5x0_nor_flash_resource, }; /* @@ -272,6 +325,16 @@ static void __init armadillo5x0_init(void) /* Register FB */ mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); + + /* Register NOR Flash */ + mxc_register_device(&armadillo5x0_nor_flash, + &armadillo5x0_nor_flash_pdata); + + /* Register NAND Flash */ + mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata); + + /* set NAND page size to 2k if not configured via boot mode pins */ + __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); } static void __init armadillo5x0_timer_init(void) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index d927eddcad46..9e87e08fb121 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -22,7 +22,6 @@ #include <linux/platform_device.h> #include <linux/serial.h> #include <linux/gpio.h> -#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/common.h> diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 4704405165a1..b48581e7dedd 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -63,7 +63,7 @@ static struct imxuart_platform_data uart_pdata = { static int devboard_sdhc2_get_ro(struct device *dev) { - return gpio_get_value(SDHC2_WP); + return !gpio_get_value(SDHC2_WP); } static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq, diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 641c3d6153ae..901fb0166c0e 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -67,7 +67,7 @@ static unsigned int marxbot_pins[] = { static int marxbot_sdhc2_get_ro(struct device *dev) { - return gpio_get_value(SDHC2_WP); + return !gpio_get_value(SDHC2_WP); } static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq, diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index a17f2e411609..2a2da4739ecf 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -94,7 +94,7 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = { static int moboard_sdhc1_get_ro(struct device *dev) { - return gpio_get_value(SDHC1_WP); + return !gpio_get_value(SDHC1_WP); } static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq, diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index c6f61a1f06c8..840cfda341d0 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -18,7 +18,7 @@ #include <linux/types.h> #include <linux/init.h> - +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/mtd/plat-ram.h> @@ -33,29 +33,67 @@ #include <linux/irq.h> #include <linux/fsl_devices.h> -#include <mach/hardware.h> +#include <media/soc_camera.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include <mach/board-pcm037.h> #include <mach/common.h> +#include <mach/hardware.h> +#include <mach/i2c.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/ipu.h> -#include <mach/board-pcm037.h> +#include <mach/mmc.h> +#include <mach/mx3_camera.h> #include <mach/mx3fb.h> #include <mach/mxc_nand.h> -#include <mach/mmc.h> -#ifdef CONFIG_I2C_IMX -#include <mach/i2c.h> -#endif #include "devices.h" +#include "pcm037.h" + +static enum pcm037_board_variant pcm037_instance = PCM037_PCM970; + +static int __init pcm037_variant_setup(char *str) +{ + if (!strcmp("eet", str)) + pcm037_instance = PCM037_EET; + else if (strcmp("pcm970", str)) + pr_warning("Unknown pcm037 baseboard variant %s\n", str); + + return 1; +} + +/* Supported values: "pcm970" (default) and "eet" */ +__setup("pcm037_variant=", pcm037_variant_setup); + +enum pcm037_board_variant pcm037_variant(void) +{ + return pcm037_instance; +} + +/* UART1 with RTS/CTS handshake signals */ +static unsigned int pcm037_uart1_handshake_pins[] = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, +}; + +/* UART1 without RTS/CTS handshake signals */ +static unsigned int pcm037_uart1_pins[] = { + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, +}; static unsigned int pcm037_pins[] = { /* I2C */ MX31_PIN_CSPI2_MOSI__SCL, MX31_PIN_CSPI2_MISO__SDA, + MX31_PIN_CSPI2_SS2__I2C3_SDA, + MX31_PIN_CSPI2_SCLK__I2C3_SCL, /* SDHC1 */ MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2, @@ -73,11 +111,6 @@ static unsigned int pcm037_pins[] = { MX31_PIN_CSPI1_SS0__SS0, MX31_PIN_CSPI1_SS1__SS1, MX31_PIN_CSPI1_SS2__SS2, - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, /* UART2 */ MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, @@ -120,6 +153,22 @@ static unsigned int pcm037_pins[] = { MX31_PIN_D3_SPL__D3_SPL, MX31_PIN_D3_CLS__D3_CLS, MX31_PIN_LCS0__GPI03_23, + /* CSI */ + IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO), + MX31_PIN_CSI_D6__CSI_D6, + MX31_PIN_CSI_D7__CSI_D7, + MX31_PIN_CSI_D8__CSI_D8, + MX31_PIN_CSI_D9__CSI_D9, + MX31_PIN_CSI_D10__CSI_D10, + MX31_PIN_CSI_D11__CSI_D11, + MX31_PIN_CSI_D12__CSI_D12, + MX31_PIN_CSI_D13__CSI_D13, + MX31_PIN_CSI_D14__CSI_D14, + MX31_PIN_CSI_D15__CSI_D15, + MX31_PIN_CSI_HSYNC__CSI_HSYNC, + MX31_PIN_CSI_MCLK__CSI_MCLK, + MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, + MX31_PIN_CSI_VSYNC__CSI_VSYNC, }; static struct physmap_flash_data pcm037_flash_data = { @@ -250,19 +299,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = { .hw_ecc = 1, }; -#ifdef CONFIG_I2C_IMX static struct imxi2c_platform_data pcm037_i2c_1_data = { .bitrate = 100000, }; +static struct imxi2c_platform_data pcm037_i2c_2_data = { + .bitrate = 20000, +}; + static struct at24_platform_data board_eeprom = { .byte_len = 4096, .page_size = 32, .flags = AT24_FLAG_ADDR16, }; +static int pcm037_camera_power(struct device *dev, int on) +{ + /* disable or enable the camera in X7 or X8 PCM970 connector */ + gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on); + return 0; +} + +static struct i2c_board_info pcm037_i2c_2_devices[] = { + { + I2C_BOARD_INFO("mt9t031", 0x5d), + }, +}; + +static struct soc_camera_link iclink = { + .bus_id = 0, /* Must match with the camera ID */ + .power = pcm037_camera_power, + .board_info = &pcm037_i2c_2_devices[0], + .i2c_adapter_id = 2, + .module_name = "mt9t031", +}; + static struct i2c_board_info pcm037_i2c_devices[] = { - { + { I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ .platform_data = &board_eeprom, }, { @@ -270,7 +343,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = { .type = "pcf8563", } }; -#endif + +static struct platform_device pcm037_camera = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &iclink, + }, +}; /* Not connected by default */ #ifdef PCM970_SDHC_RW_SWITCH @@ -334,9 +414,41 @@ static struct imxmmc_platform_data sdhc_pdata = { .exit = pcm970_sdhc1_exit, }; +struct mx3_camera_pdata camera_pdata = { + .dma_dev = &mx3_ipu.dev, + .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10, + .mclk_10khz = 2000, +}; + +static int __init pcm037_camera_alloc_dma(const size_t buf_size) +{ + dma_addr_t dma_handle; + void *buf; + int dma; + + if (buf_size < 2 * 1024 * 1024) + return -EINVAL; + + buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL); + if (!buf) { + pr_err("%s: cannot allocate camera buffer-memory\n", __func__); + return -ENOMEM; + } + + memset(buf, 0, buf_size); + + dma = dma_declare_coherent_memory(&mx3_camera.dev, + dma_handle, dma_handle, buf_size, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + + /* The way we call dma_declare_coherent_memory only a malloc can fail */ + return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM; +} + static struct platform_device *devices[] __initdata = { &pcm037_flash, &pcm037_sram_device, + &pcm037_camera, }; static struct ipu_platform_data mx3_ipu_data = { @@ -377,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = { .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, .vmode = FB_VMODE_NONINTERLACED, .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "CMEL-OLED", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, }, }; @@ -397,6 +525,14 @@ static void __init mxc_board_init(void) mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), "pcm037"); + if (pcm037_variant() == PCM037_EET) + mxc_iomux_setup_multiple_pins(pcm037_uart1_pins, + ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1"); + else + mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins, + ARRAY_SIZE(pcm037_uart1_handshake_pins), + "pcm037_uart1"); + platform_add_devices(devices, ARRAY_SIZE(devices)); mxc_register_device(&mxc_uart_device0, &uart_pdata); @@ -415,18 +551,30 @@ static void __init mxc_board_init(void) } -#ifdef CONFIG_I2C_IMX + /* I2C adapters and devices */ i2c_register_board_info(1, pcm037_i2c_devices, ARRAY_SIZE(pcm037_i2c_devices)); mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data); -#endif + mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data); + mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); if (!gpio_usbotg_hs_activate()) mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + + /* CSI */ + /* Camera power: default - off */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power"); + if (!ret) + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1); + else + iclink.power = NULL; + + if (!pcm037_camera_alloc_dma(4 * 1024 * 1024)) + mxc_register_device(&mx3_camera, &camera_pdata); } static void __init pcm037_timer_init(void) @@ -448,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .init_machine = mxc_board_init, .timer = &pcm037_timer, MACHINE_END - diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-mx3/pcm037.h new file mode 100644 index 000000000000..d6929721a5fd --- /dev/null +++ b/arch/arm/mach-mx3/pcm037.h @@ -0,0 +1,11 @@ +#ifndef __PCM037_H__ +#define __PCM037_H__ + +enum pcm037_board_variant { + PCM037_PCM970, + PCM037_EET, +}; + +extern enum pcm037_board_variant pcm037_variant(void); + +#endif diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c new file mode 100644 index 000000000000..8d386000fc40 --- /dev/null +++ b/arch/arm/mach-mx3/pcm037_eet.c @@ -0,0 +1,195 @@ +/* + * Copyright (C) 2009 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +#include <mach/common.h> +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) +#include <mach/spi.h> +#endif +#include <mach/iomux-mx3.h> + +#include <asm/mach-types.h> + +#include "pcm037.h" +#include "devices.h" + +static unsigned int pcm037_eet_pins[] = { + /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */ + IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO), + /* GPIO keys */ + IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */ + IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */ + IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */ + IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */ + IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */ + IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */ + IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */ + IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */ + IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */ + IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */ + IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */ + IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */ + IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */ + IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */ + + /* LEDs */ + IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */ + IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */ + IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */ + IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */ +}; + +/* SPI */ +static struct spi_board_info pcm037_spi_dev[] = { + { + .modalias = "dac124s085", + .max_speed_hz = 400000, + .bus_num = 0, + .chip_select = 0, /* Index in pcm037_spi1_cs[] */ + .mode = SPI_CPHA, + }, +}; + +/* Platform Data for MXC CSPI */ +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) +static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)}; + +struct spi_imx_master pcm037_spi1_master = { + .chipselect = pcm037_spi1_cs, + .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs), +}; +#endif + +/* GPIO-keys input device */ +static struct gpio_keys_button pcm037_gpio_keys[] = { + { + .type = EV_KEY, + .code = KEY_L, + .gpio = 0, + .desc = "Wheel Manual", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_A, + .gpio = 1, + .desc = "Wheel AF", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_V, + .gpio = 2, + .desc = "Wheel View", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_M, + .gpio = 3, + .desc = "Wheel Menu", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_UP, + .gpio = 32, + .desc = "Nav Pad Up", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_RIGHT, + .gpio = 33, + .desc = "Nav Pad Right", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_DOWN, + .gpio = 34, + .desc = "Nav Pad Down", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_LEFT, + .gpio = 35, + .desc = "Nav Pad Left", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_ENTER, + .gpio = 38, + .desc = "Nav Pad Ok", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_O, + .gpio = 39, + .desc = "Wheel Off", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_FORWARD, + .gpio = 50, + .desc = "Focus Forward", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_BACK, + .gpio = 51, + .desc = "Focus Backward", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_MIDDLE, + .gpio = 52, + .desc = "Release Half", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_EXTRA, + .gpio = 53, + .desc = "Release Full", + .wakeup = 0, + }, +}; + +static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = { + .buttons = pcm037_gpio_keys, + .nbuttons = ARRAY_SIZE(pcm037_gpio_keys), + .rep = 0, /* No auto-repeat */ +}; + +static struct platform_device pcm037_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &pcm037_gpio_keys_platform_data, + }, +}; + +static int eet_init_devices(void) +{ + if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET) + return 0; + + mxc_iomux_setup_multiple_pins(pcm037_eet_pins, + ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet"); + + /* SPI */ + spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) + mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master); +#endif + + platform_device_register(&pcm037_gpio_keys_device); + + return 0; +} + +late_initcall(eet_init_devices); diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index a2d7814896be..505d98cfe508 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,7 +19,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -#include <mach/irqs.h> #include <mach/mux.h> #include <mach/cpu.h> #include <mach/mcbsp.h> diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 9c3fdcdf76c3..8ec2a132904d 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -141,7 +141,7 @@ static inline void board_smc91x_init(void) static void __init omap_2430sdp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 496a90e4ea7a..ac262cd74503 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -169,7 +169,7 @@ static struct platform_device *sdp3430_devices[] __initdata = { static void __init omap_3430sdp_init_irq(void) { - omap2_init_common_hw(hyb18m512160af6_sdrc_params); + omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 57e477bd89c6..b0c7402248f7 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -59,7 +59,7 @@ static void __init gic_init_irq(void) static void __init omap_4430sdp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(1); #endif diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 06dfba888b0c..dcfc20d03894 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -250,7 +250,7 @@ out: static void __init omap_apollon_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); apollon_init_smc91x(); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 3492162a65c3..fd00aa03690c 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -33,7 +33,7 @@ static void __init omap_generic_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); } diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index e7d017cdc438..7b1d61d5bb2c 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -270,7 +270,7 @@ static void __init h4_init_flash(void) static void __init omap_h4_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); h4_init_flash(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d8bc0a7dcb8d..ea383f88cb1b 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -270,7 +270,7 @@ static inline void __init ldp_init_smsc911x(void) static void __init omap_ldp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); ldp_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 991ac9c38032..e00ba128cece 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -282,7 +282,8 @@ static int __init omap3_beagle_i2c_init(void) static void __init omap3_beagle_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); @@ -408,6 +409,10 @@ static void __init omap3_beagle_init(void) usb_musb_init(); omap3beagle_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init omap3_beagle_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index d3cc145814d0..c4b144647dc5 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -25,6 +25,7 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/i2c/twl4030.h> +#include <linux/usb/otg.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -279,7 +280,7 @@ struct spi_board_info omap3evm_spi_board_info[] = { static void __init omap3_evm_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL); omap_init_irq(); omap_gpio_init(); omap3evm_init_smc911x(); @@ -307,6 +308,10 @@ static void __init omap3_evm_init(void) ARRAY_SIZE(omap3evm_spi_board_info)); omap_serial_init(); +#ifdef CONFIG_NOP_USB_XCEIV + /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */ + usb_nop_xceiv_register(); +#endif usb_musb_init(); ads7846_dev_init(); } diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index e32aa23ce962..864ee3d021f7 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -40,6 +40,7 @@ #include <mach/mcspi.h> #include <mach/usb.h> #include <mach/keypad.h> +#include <mach/mux.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -310,7 +311,8 @@ static int __init omap3pandora_i2c_init(void) static void __init omap3pandora_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } @@ -397,6 +399,10 @@ static void __init omap3pandora_init(void) omap3pandora_ads7846_init(); pandora_keys_gpio_init(); usb_musb_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init omap3pandora_map_io(void) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index dff5528fbfb5..6bce23004aa4 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -44,6 +44,7 @@ #include <mach/gpmc.h> #include <mach/hardware.h> #include <mach/nand.h> +#include <mach/mux.h> #include <mach/usb.h> #include "sdram-micron-mt46h32m32lf-6.h" @@ -51,6 +52,7 @@ #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 +#define OVERO_GPIO_PENDOWN 114 #define OVERO_GPIO_BT_NRESET 164 #define OVERO_GPIO_USBH_CPEN 168 #define OVERO_GPIO_USBH_NRESET 183 @@ -146,7 +148,7 @@ static struct platform_device overo_smsc911x_device = { .name = "smsc911x", .id = -1, .num_resources = ARRAY_SIZE(overo_smsc911x_resources), - .resource = &overo_smsc911x_resources, + .resource = overo_smsc911x_resources, .dev = { .platform_data = &overo_smsc911x_config, }, @@ -360,7 +362,8 @@ static int __init overo_i2c_init(void) static void __init overo_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } @@ -395,6 +398,10 @@ static void __init overo_init(void) overo_ads7846_init(); overo_init_smsc911x(); + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); + if ((gpio_request(OVERO_GPIO_W2W_NRESET, "OVERO_GPIO_W2W_NRESET") == 0) && (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) { diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 9a0bf6744a05..56d931a425f7 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = { .setup = rx51_twlgpio_setup, }; +static struct twl4030_usb_data rx51_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + static struct twl4030_platform_data rx51_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = { .gpio = &rx51_gpio_data, .keypad = &rx51_kp_data, .madc = &rx51_madc_data, + .usb = &rx51_usb_data, .vaux1 = &rx51_vaux1, .vaux2 = &rx51_vaux2, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 374ff63c3eb2..1c9e07fe8266 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -61,7 +61,7 @@ static struct omap_board_config_kernel rx51_config[] = { static void __init rx51_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } @@ -75,6 +75,10 @@ static void __init rx51_init(void) omap_serial_init(); usb_musb_init(); rx51_peripherals_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init rx51_map_io(void) diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index bcc0f7632dea..427b7b8b1237 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -25,7 +25,7 @@ static void __init omap_zoom2_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index b0665f161c03..456e2ad5f621 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -27,6 +27,7 @@ #include <mach/clock.h> #include <mach/clockdomain.h> #include <mach/cpu.h> +#include <mach/prcm.h> #include <asm/div64.h> #include <mach/sdrc.h> @@ -38,8 +39,6 @@ #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" -#define MAX_CLOCK_ENABLE_WAIT 100000 - /* DPLL rate rounding: minimum DPLL multiplier, divider values */ #define DPLL_MIN_MULTIPLIER 1 #define DPLL_MIN_DIVIDER 1 @@ -274,83 +273,97 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk) } /** - * omap2_wait_clock_ready - wait for clock to enable - * @reg: physical address of clock IDLEST register - * @mask: value to mask against to determine if the clock is active - * @name: name of the clock (for printk) + * omap2_clk_dflt_find_companion - find companion clock to @clk + * @clk: struct clk * to find the companion clock of + * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in + * @other_bit: u8 ** to return the companion clock bit shift in + * + * Note: We don't need special code here for INVERT_ENABLE for the + * time being since INVERT_ENABLE only applies to clocks enabled by + * CM_CLKEN_PLL * - * Returns 1 if the clock enabled in time, or 0 if it failed to enable - * in roughly MAX_CLOCK_ENABLE_WAIT microseconds. + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's + * just a matter of XORing the bits. + * + * Some clocks don't have companion clocks. For example, modules with + * only an interface clock (such as MAILBOXES) don't have a companion + * clock. Right now, this code relies on the hardware exporting a bit + * in the correct companion register that indicates that the + * nonexistent 'companion clock' is active. Future patches will + * associate this type of code with per-module data structures to + * avoid this issue, and remove the casts. No return value. */ -int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name) +void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, + u8 *other_bit) { - int i = 0; - int ena = 0; + u32 r; /* - * 24xx uses 0 to indicate not ready, and 1 to indicate ready. - * 34xx reverses this, just to keep us on our toes + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes + * it's just a matter of XORing the bits. */ - if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) - ena = mask; - else if (cpu_mask & RATE_IN_343X) - ena = 0; - - /* Wait for lock */ - while (((__raw_readl(reg) & mask) != ena) && - (i++ < MAX_CLOCK_ENABLE_WAIT)) { - udelay(1); - } - - if (i <= MAX_CLOCK_ENABLE_WAIT) - pr_debug("Clock %s stable after %d loops\n", name, i); - else - printk(KERN_ERR "Clock %s didn't enable in %d tries\n", - name, MAX_CLOCK_ENABLE_WAIT); - - - return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0; -}; + r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN)); + *other_reg = (__force void __iomem *)r; + *other_bit = clk->enable_bit; +} -/* - * Note: We don't need special code here for INVERT_ENABLE - * for the time being since INVERT_ENABLE only applies to clocks enabled by - * CM_CLKEN_PLL +/** + * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk + * @clk: struct clk * to find IDLEST info for + * @idlest_reg: void __iomem ** to return the CM_IDLEST va in + * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in + * + * Return the CM_IDLEST register address and bit shift corresponding + * to the module that "owns" this clock. This default code assumes + * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that + * the IDLEST register address ID corresponds to the CM_*CLKEN + * register address ID (e.g., that CM_FCLKEN2 corresponds to + * CM_IDLEST2). This is not true for all modules. No return value. */ -static void omap2_clk_wait_ready(struct clk *clk) +void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, + u8 *idlest_bit) { - void __iomem *reg, *other_reg, *st_reg; - u32 bit; + u32 r; - /* - * REVISIT: This code is pretty ugly. It would be nice to generalize - * it and pull it into struct clk itself somehow. - */ - reg = clk->enable_reg; + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = clk->enable_bit; +} - /* - * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes - * it's just a matter of XORing the bits. - */ - other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN)); +/** + * omap2_module_wait_ready - wait for an OMAP module to leave IDLE + * @clk: struct clk * belonging to the module + * + * If the necessary clocks for the OMAP hardware IP block that + * corresponds to clock @clk are enabled, then wait for the module to + * indicate readiness (i.e., to leave IDLE). This code does not + * belong in the clock code and will be moved in the medium term to + * module-dependent code. No return value. + */ +static void omap2_module_wait_ready(struct clk *clk) +{ + void __iomem *companion_reg, *idlest_reg; + u8 other_bit, idlest_bit; + + /* Not all modules have multiple clocks that their IDLEST depends on */ + if (clk->ops->find_companion) { + clk->ops->find_companion(clk, &companion_reg, &other_bit); + if (!(__raw_readl(companion_reg) & (1 << other_bit))) + return; + } - /* Check if both functional and interface clocks - * are running. */ - bit = 1 << clk->enable_bit; - if (!(__raw_readl(other_reg) & bit)) - return; - st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */ + clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit); - omap2_wait_clock_ready(st_reg, bit, clk->name); + omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name); } -static int omap2_dflt_clk_enable(struct clk *clk) +int omap2_dflt_clk_enable(struct clk *clk) { u32 v; if (unlikely(clk->enable_reg == NULL)) { - printk(KERN_ERR "clock.c: Enable for %s without enable code\n", + pr_err("clock.c: Enable for %s without enable code\n", clk->name); return 0; /* REVISIT: -EINVAL */ } @@ -363,26 +376,13 @@ static int omap2_dflt_clk_enable(struct clk *clk) __raw_writel(v, clk->enable_reg); v = __raw_readl(clk->enable_reg); /* OCP barrier */ - return 0; -} + if (clk->ops->find_idlest) + omap2_module_wait_ready(clk); -static int omap2_dflt_clk_enable_wait(struct clk *clk) -{ - int ret; - - if (!clk->enable_reg) { - printk(KERN_ERR "clock.c: Enable for %s without enable code\n", - clk->name); - return 0; /* REVISIT: -EINVAL */ - } - - ret = omap2_dflt_clk_enable(clk); - if (ret == 0) - omap2_clk_wait_ready(clk); - return ret; + return 0; } -static void omap2_dflt_clk_disable(struct clk *clk) +void omap2_dflt_clk_disable(struct clk *clk) { u32 v; @@ -406,8 +406,10 @@ static void omap2_dflt_clk_disable(struct clk *clk) } const struct clkops clkops_omap2_dflt_wait = { - .enable = omap2_dflt_clk_enable_wait, + .enable = omap2_dflt_clk_enable, .disable = omap2_dflt_clk_disable, + .find_companion = omap2_clk_dflt_find_companion, + .find_idlest = omap2_clk_dflt_find_idlest, }; const struct clkops clkops_omap2_dflt = { diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 2679ddfa6424..9ae7540f8af2 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -65,6 +65,12 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate); u32 omap2_get_dpll_rate(struct clk *clk); int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); void omap2_clk_prepare_for_reboot(void); +int omap2_dflt_clk_enable(struct clk *clk); +void omap2_dflt_clk_disable(struct clk *clk); +void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, + u8 *other_bit); +void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, + u8 *idlest_bit); extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_omap2_dflt; diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 44de0271fc2f..bc5d3ac66611 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -30,6 +30,7 @@ #include <mach/clock.h> #include <mach/sram.h> +#include <mach/prcm.h> #include <asm/div64.h> #include <asm/clkdev.h> @@ -43,6 +44,18 @@ static const struct clkops clkops_oscck; static const struct clkops clkops_fixed; +static void omap2430_clk_i2chs_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); + +/* 2430 I2CHS has non-standard IDLEST register */ +static const struct clkops clkops_omap2430_i2chs_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap2430_clk_i2chs_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + #include "clock24xx.h" struct omap_clk { @@ -240,6 +253,26 @@ static void __iomem *prcm_clksrc_ctrl; *-------------------------------------------------------------------------*/ /** + * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the + * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function + * passes back the correct CM_IDLEST register address for I2CHS + * modules. No return value. + */ +static void omap2430_clk_i2chs_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST); + *idlest_bit = clk->enable_bit; +} + + +/** * omap2xxx_clk_get_core_rate - return the CORE_CLK rate * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") * @@ -325,8 +358,8 @@ static int omap2_clk_fixed_enable(struct clk *clk) else if (clk == &apll54_ck) cval = OMAP24XX_ST_54M_APLL; - omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, - clk->name); + omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, + clk->name); /* * REVISIT: Should we return an error code if omap2_wait_clock_ready() diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 458f00cdcbea..d19cf7a7d8db 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -2337,7 +2337,7 @@ static struct clk i2c2_fck = { static struct clk i2chs2_fck = { .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2430_i2chs_wait, .id = 2, .parent = &func_96m_ck, .clkdm_name = "core_l4_clkdm", @@ -2370,7 +2370,7 @@ static struct clk i2c1_fck = { static struct clk i2chs1_fck = { .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2430_i2chs_wait, .id = 1, .parent = &func_96m_ck, .clkdm_name = "core_l4_clkdm", diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 045da923e75b..cd7819cc0c9e 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -2,7 +2,7 @@ * OMAP3-specific clock framework functions * * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation + * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley * Testing and integration fixes by Jouni Högander @@ -41,6 +41,37 @@ static const struct clkops clkops_noncore_dpll_ops; +static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); +static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); +static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); + +static const struct clkops clkops_omap3430es2_ssi_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_ssi_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +static const struct clkops clkops_omap3430es2_hsotgusb_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +static const struct clkops clkops_omap3430es2_dss_usbhost_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + #include "clock34xx.h" struct omap_clk { @@ -157,10 +188,13 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2), CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), - CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2), CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), @@ -193,18 +227,21 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X), - CLK(NULL, "ssi_ick", &ssi_ick, CK_343X), + CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2), CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), CLK("omap_rng", "ick", &rng_ick, CK_343X), CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), - CLK("omapfb", "ick", &dss_ick, CK_343X), + CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1), + CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2), CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), CLK(NULL, "cam_ick", &cam_ick, CK_343X), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), @@ -301,6 +338,73 @@ static struct omap_clk omap34xx_clks[] = { #define SDRC_MPURATE_LOOPS 96 /** + * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift + * from the CM_{I,F}CLKEN bit. Pass back the correct info via + * @idlest_reg and @idlest_bit. No return value. + */ +static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT; +} + +/** + * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * Some OMAP modules on OMAP3 ES2+ chips have both initiator and + * target IDLEST bits. For our purposes, we are concerned with the + * target IDLEST bits, which exist at a different bit position than + * the *CLKEN bit position for these modules (DSS and USBHOST) (The + * default find_idlest code assumes that they are at the same + * position.) No return value. + */ +static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + /* USBHOST_IDLE has same shift */ + *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT; +} + +/** + * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different + * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via + * @idlest_reg and @idlest_bit. No return value. + */ +static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT; +} + +/** * omap3_dpll_recalc - recalculate DPLL rate * @clk: DPLL struct clk * @@ -725,7 +829,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) u32 unlock_dll = 0; u32 c; unsigned long validrate, sdrcrate, mpurate; - struct omap_sdrc_params *sp; + struct omap_sdrc_params *sdrc_cs0; + struct omap_sdrc_params *sdrc_cs1; + int ret; if (!clk || !rate) return -EINVAL; @@ -743,8 +849,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) else sdrcrate >>= ((clk->rate / rate) >> 1); - sp = omap2_sdrc_get_params(sdrcrate); - if (!sp) + ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1); + if (ret) return -EINVAL; if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) { @@ -765,12 +871,29 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, validrate); - pr_debug("clock: SDRC timing params used: %08x %08x %08x\n", - sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); - - omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, - sp->actim_ctrlb, new_div, unlock_dll, c, - sp->mr, rate > clk->rate); + pr_debug("clock: SDRC CS0 timing params used:" + " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr); + if (sdrc_cs1) + pr_debug("clock: SDRC CS1 timing params used: " + " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", + sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, + sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); + + if (sdrc_cs1) + omap3_configure_core_dpll( + new_div, unlock_dll, c, rate > clk->rate, + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, + sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, + sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); + else + omap3_configure_core_dpll( + new_div, unlock_dll, c, rate > clk->rate, + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, + 0, 0, 0, 0); return 0; } diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index e433aec4efdd..57cc2725b923 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -1568,7 +1568,7 @@ static const struct clksel ssi_ssr_clksel[] = { { .parent = NULL } }; -static struct clk ssi_ssr_fck = { +static struct clk ssi_ssr_fck_3430es1 = { .name = "ssi_ssr_fck", .ops = &clkops_omap2_dflt, .init = &omap2_init_clksel_parent, @@ -1581,10 +1581,31 @@ static struct clk ssi_ssr_fck = { .recalc = &omap2_clksel_recalc, }; -static struct clk ssi_sst_fck = { +static struct clk ssi_ssr_fck_3430es2 = { + .name = "ssi_ssr_fck", + .ops = &clkops_omap3430es2_ssi_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, + .clksel = ssi_ssr_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_sst_fck_3430es1 = { .name = "ssi_sst_fck", .ops = &clkops_null, - .parent = &ssi_ssr_fck, + .parent = &ssi_ssr_fck_3430es1, + .fixed_div = 2, + .recalc = &omap2_fixed_divisor_recalc, +}; + +static struct clk ssi_sst_fck_3430es2 = { + .name = "ssi_sst_fck", + .ops = &clkops_null, + .parent = &ssi_ssr_fck_3430es2, .fixed_div = 2, .recalc = &omap2_fixed_divisor_recalc, }; @@ -1606,9 +1627,19 @@ static struct clk core_l3_ick = { .recalc = &followparent_recalc, }; -static struct clk hsotgusb_ick = { +static struct clk hsotgusb_ick_3430es1 = { .name = "hsotgusb_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hsotgusb_ick_3430es2 = { + .name = "hsotgusb_ick", + .ops = &clkops_omap3430es2_hsotgusb_wait, .parent = &core_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, @@ -1947,7 +1978,7 @@ static struct clk ssi_l4_ick = { .recalc = &followparent_recalc, }; -static struct clk ssi_ick = { +static struct clk ssi_ick_3430es1 = { .name = "ssi_ick", .ops = &clkops_omap2_dflt, .parent = &ssi_l4_ick, @@ -1957,6 +1988,16 @@ static struct clk ssi_ick = { .recalc = &followparent_recalc, }; +static struct clk ssi_ick_3430es2 = { + .name = "ssi_ick", + .ops = &clkops_omap3430es2_ssi_wait, + .parent = &ssi_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + /* REVISIT: Technically the TRM claims that this is CORE_CLK based, * but l4_ick makes more sense to me */ @@ -2024,7 +2065,7 @@ static struct clk des1_ick = { }; /* DSS */ -static struct clk dss1_alwon_fck = { +static struct clk dss1_alwon_fck_3430es1 = { .name = "dss1_alwon_fck", .ops = &clkops_omap2_dflt, .parent = &dpll4_m4x2_ck, @@ -2034,6 +2075,16 @@ static struct clk dss1_alwon_fck = { .recalc = &followparent_recalc, }; +static struct clk dss1_alwon_fck_3430es2 = { + .name = "dss1_alwon_fck", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &dpll4_m4x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS1_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk dss_tv_fck = { .name = "dss_tv_fck", .ops = &clkops_omap2_dflt, @@ -2067,7 +2118,7 @@ static struct clk dss2_alwon_fck = { .recalc = &followparent_recalc, }; -static struct clk dss_ick = { +static struct clk dss_ick_3430es1 = { /* Handles both L3 and L4 clocks */ .name = "dss_ick", .ops = &clkops_omap2_dflt, @@ -2079,6 +2130,18 @@ static struct clk dss_ick = { .recalc = &followparent_recalc, }; +static struct clk dss_ick_3430es2 = { + /* Handles both L3 and L4 clocks */ + .name = "dss_ick", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &l4_ick, + .init = &omap2_init_clk_clkdm, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + /* CAM */ static struct clk cam_mclk = { @@ -2118,7 +2181,7 @@ static struct clk csi2_96m_fck = { static struct clk usbhost_120m_fck = { .name = "usbhost_120m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll5_m2_ck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), @@ -2129,7 +2192,7 @@ static struct clk usbhost_120m_fck = { static struct clk usbhost_48m_fck = { .name = "usbhost_48m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap3430es2_dss_usbhost_wait, .parent = &omap_48m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), @@ -2141,7 +2204,7 @@ static struct clk usbhost_48m_fck = { static struct clk usbhost_ick = { /* Handles both L3 and L4 clocks */ .name = "usbhost_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap3430es2_dss_usbhost_wait, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 1d3c93bf86d3..f3c91a1ca391 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -29,9 +29,9 @@ * These registers appear once per CM module. */ -#define OMAP3430_CM_REVISION OMAP_CM_REGADDR(OCP_MOD, 0x0000) -#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010) -#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c) +#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) +#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) +#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) #define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 #define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3a86b0f66031..e9b9bcb19b4e 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -276,14 +276,15 @@ static int __init _omap2_init_reprogram_sdrc(void) return v; } -void __init omap2_init_common_hw(struct omap_sdrc_params *sp) +void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) { omap2_mux_init(); #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */ pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); - omap2_sdrc_init(sp); + omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); #endif gpmc_init(); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index a5c0f0435cd6..0447d26d454b 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -19,7 +19,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -#include <mach/irqs.h> #include <mach/mux.h> #include <mach/cpu.h> #include <mach/mcbsp.h> @@ -129,6 +128,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, + .buffer_size = 0x6F, }, { .phys_base = OMAP34XX_MCBSP2_BASE, @@ -137,6 +137,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, + .buffer_size = 0x3FF, }, { .phys_base = OMAP34XX_MCBSP3_BASE, @@ -145,6 +146,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, + .buffer_size = 0x6F, }, { .phys_base = OMAP34XX_MCBSP4_BASE, @@ -153,6 +155,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, + .buffer_size = 0x6F, }, { .phys_base = OMAP34XX_MCBSP5_BASE, @@ -161,6 +164,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, + .buffer_size = 0x6F, }, }; #define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata) diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 1541fd4c8d0f..3c04c2f1b23f 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -119,6 +119,7 @@ static int twl_mmc_late_init(struct device *dev) if (i != 0) break; ret = PTR_ERR(reg); + hsmmc[i].vcc = NULL; goto err; } hsmmc[i].vcc = reg; @@ -165,8 +166,13 @@ done: static void twl_mmc_cleanup(struct device *dev) { struct omap_mmc_platform_data *mmc = dev->platform_data; + int i; gpio_free(mmc->slots[0].switch_pin); + for(i = 0; i < ARRAY_SIZE(hsmmc); i++) { + regulator_put(hsmmc[i].vcc); + regulator_put(hsmmc[i].vcc_aux); + } } #ifdef CONFIG_PM diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 026c4fc883a7..43d6b92b65f2 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -486,6 +486,12 @@ MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) + +/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ +MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) }; #define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index f7b3baf76678..21201cd4117b 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -11,9 +11,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PM_H #define __ARCH_ARM_MACH_OMAP2_PM_H -extern int omap2_pm_init(void); -extern int omap3_pm_init(void); - #ifdef CONFIG_PM_DEBUG extern void omap2_pm_dump(int mode, int resume, unsigned int us); extern int omap2_pm_debug; diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index db1025562fb0..528dbdc26e23 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -470,7 +470,7 @@ static void __init prcm_setup_regs(void) WKUP_MOD, PM_WKEN); } -int __init omap2_pm_init(void) +static int __init omap2_pm_init(void) { u32 l; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 841d4c5ed8be..488d595d8e4b 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -39,7 +39,9 @@ struct power_state { struct powerdomain *pwrdm; u32 next_state; +#ifdef CONFIG_SUSPEND u32 saved_state; +#endif struct list_head node; }; @@ -293,6 +295,9 @@ out: local_irq_enable(); } +#ifdef CONFIG_SUSPEND +static suspend_state_t suspend_state; + static int omap3_pm_prepare(void) { disable_hlt(); @@ -321,7 +326,6 @@ static int omap3_pm_suspend(void) restore: /* Restore next_pwrsts */ list_for_each_entry(pwrst, &pwrst_list, node) { - set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); state = pwrdm_read_prev_pwrst(pwrst->pwrdm); if (state > pwrst->next_state) { printk(KERN_INFO "Powerdomain (%s) didn't enter " @@ -329,6 +333,7 @@ restore: pwrst->pwrdm->name, pwrst->next_state); ret = -1; } + set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); } if (ret) printk(KERN_ERR "Could not enter target state in pm_suspend\n"); @@ -339,11 +344,11 @@ restore: return ret; } -static int omap3_pm_enter(suspend_state_t state) +static int omap3_pm_enter(suspend_state_t unused) { int ret = 0; - switch (state) { + switch (suspend_state) { case PM_SUSPEND_STANDBY: case PM_SUSPEND_MEM: ret = omap3_pm_suspend(); @@ -360,12 +365,30 @@ static void omap3_pm_finish(void) enable_hlt(); } +/* Hooks to enable / disable UART interrupts during suspend */ +static int omap3_pm_begin(suspend_state_t state) +{ + suspend_state = state; + omap_uart_enable_irqs(0); + return 0; +} + +static void omap3_pm_end(void) +{ + suspend_state = PM_SUSPEND_ON; + omap_uart_enable_irqs(1); + return; +} + static struct platform_suspend_ops omap_pm_ops = { + .begin = omap3_pm_begin, + .end = omap3_pm_end, .prepare = omap3_pm_prepare, .enter = omap3_pm_enter, .finish = omap3_pm_finish, .valid = suspend_valid_only_mem, }; +#endif /* CONFIG_SUSPEND */ /** @@ -613,6 +636,24 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + /* Don't attach IVA interrupts */ + prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + + /* Clear any pending 'reset' flags */ + prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST); + + /* Clear any pending PRCM interrupts */ + prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + omap3_iva_idle(); omap3_d2d_idle(); } @@ -652,7 +693,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm) return 0; } -int __init omap3_pm_init(void) +static int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; int ret; @@ -692,7 +733,9 @@ int __init omap3_pm_init(void) _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, omap34xx_cpu_suspend_sz); +#ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); +#endif /* CONFIG_SUSPEND */ pm_idle = omap3_pm_idle; diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index f945156d5585..ced555a4cd1a 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/delay.h> #include <mach/common.h> #include <mach/prcm.h> @@ -28,6 +29,8 @@ static void __iomem *prm_base; static void __iomem *cm_base; +#define MAX_MODULE_ENABLE_WAIT 100000 + u32 omap_prcm_get_reset_sources(void) { /* XXX This presumably needs modification for 34XX */ @@ -120,6 +123,46 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) } EXPORT_SYMBOL(cm_rmw_mod_reg_bits); +/** + * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness + * @reg: physical address of module IDLEST register + * @mask: value to mask against to determine if the module is active + * @name: name of the clock (for printk) + * + * Returns 1 if the module indicated readiness in time, or 0 if it + * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds. + */ +int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name) +{ + int i = 0; + int ena = 0; + + /* + * 24xx uses 0 to indicate not ready, and 1 to indicate ready. + * 34xx reverses this, just to keep us on our toes + */ + if (cpu_is_omap24xx()) + ena = mask; + else if (cpu_is_omap34xx()) + ena = 0; + else + BUG(); + + /* Wait for lock */ + while (((__raw_readl(reg) & mask) != ena) && + (i++ < MAX_MODULE_ENABLE_WAIT)) + udelay(1); + + if (i < MAX_MODULE_ENABLE_WAIT) + pr_debug("cm: Module associated with clock %s ready after %d " + "loops\n", name, i); + else + pr_err("cm: Module associated with clock %s didn't enable in " + "%d tries\n", name, MAX_MODULE_ENABLE_WAIT); + + return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; +}; + void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) { prm_base = omap2_globals->prm; diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 2045441e8385..9e3bd4fa7810 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -32,7 +32,7 @@ #include <mach/sdrc.h> #include "sdrc.h" -static struct omap_sdrc_params *sdrc_init_params; +static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; void __iomem *omap2_sdrc_base; void __iomem *omap2_sms_base; @@ -45,33 +45,49 @@ void __iomem *omap2_sms_base; /** * omap2_sdrc_get_params - return SDRC register values for a given clock rate * @r: SDRC clock rate (in Hz) + * @sdrc_cs0: chip select 0 ram timings ** + * @sdrc_cs1: chip select 1 ram timings ** * * Return pre-calculated values for the SDRC_ACTIM_CTRLA, - * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given - * SDRC clock rate 'r'. These parameters control various timing - * delays in the SDRAM controller that are expressed in terms of the - * number of SDRC clock cycles to wait; hence the clock rate - * dependency. Note that sdrc_init_params must be sorted rate - * descending. Also assumes that both chip-selects use the same - * timing parameters. Returns a struct omap_sdrc_params * upon - * success, or NULL upon failure. + * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01] + * structs,for a given SDRC clock rate 'r'. + * These parameters control various timing delays in the SDRAM controller + * that are expressed in terms of the number of SDRC clock cycles to + * wait; hence the clock rate dependency. + * + * Supports 2 different timing parameters for both chip selects. + * + * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending. + * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size + * as sdrc_init_params_cs_0. + * + * Fills in the struct omap_sdrc_params * for each chip select. + * Returns 0 upon success or -1 upon failure. */ -struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r) +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1) { - struct omap_sdrc_params *sp; + struct omap_sdrc_params *sp0, *sp1; - if (!sdrc_init_params) - return NULL; + if (!sdrc_init_params_cs0) + return -1; - sp = sdrc_init_params; + sp0 = sdrc_init_params_cs0; + sp1 = sdrc_init_params_cs1; - while (sp->rate && sp->rate != r) - sp++; + while (sp0->rate && sp0->rate != r) { + sp0++; + if (sdrc_init_params_cs1) + sp1++; + } - if (!sp->rate) - return NULL; + if (!sp0->rate) + return -1; - return sp; + *sdrc_cs0 = sp0; + *sdrc_cs1 = sp1; + return 0; } @@ -83,13 +99,15 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) /** * omap2_sdrc_init - initialize SMS, SDRC devices on boot - * @sp: pointer to a null-terminated list of struct omap_sdrc_params + * @sdrc_cs[01]: pointers to a null-terminated list of struct omap_sdrc_params + * Support for 2 chip selects timings * * Turn on smart idle modes for SDRAM scheduler and controller. * Program a known-good configuration for the SDRC to deal with buggy * bootloaders. */ -void __init omap2_sdrc_init(struct omap_sdrc_params *sp) +void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) { u32 l; @@ -103,11 +121,15 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp) l |= (0x2 << 3); sdrc_write_reg(l, SDRC_SYSCONFIG); - sdrc_init_params = sp; + sdrc_init_params_cs0 = sdrc_cs0; + sdrc_init_params_cs1 = sdrc_cs1; /* XXX Enable SRFRONIDLEREQ here also? */ + /* + * PWDENA should not be set due to 34xx erratum 1.150 - PWDENA + * can cause random memory corruption + */ l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) | - (1 << SDRC_POWER_PWDENA_SHIFT) | (1 << SDRC_POWER_PAGEPOLICY_SHIFT); sdrc_write_reg(l, SDRC_POWER); } diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index b094c15bfe47..a7421a50410b 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -54,6 +54,7 @@ struct omap_uart_state { struct plat_serial8250_port *p; struct list_head node; + struct platform_device pdev; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) int context_valid; @@ -68,10 +69,9 @@ struct omap_uart_state { #endif }; -static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS]; static LIST_HEAD(uart_list); -static struct plat_serial8250_port serial_platform_data[] = { +static struct plat_serial8250_port serial_platform_data0[] = { { .membase = IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, @@ -81,6 +81,12 @@ static struct plat_serial8250_port serial_platform_data[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { + .flags = 0 + } +}; + +static struct plat_serial8250_port serial_platform_data1[] = { + { .membase = IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = 73, @@ -89,6 +95,12 @@ static struct plat_serial8250_port serial_platform_data[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { + .flags = 0 + } +}; + +static struct plat_serial8250_port serial_platform_data2[] = { + { .membase = IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = 74, @@ -217,6 +229,40 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) clk_disable(uart->fck); } +static void omap_uart_enable_wakeup(struct omap_uart_state *uart) +{ + /* Set wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + u32 v = __raw_readl(uart->wk_en); + v |= uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are set */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v = omap_ctrl_readw(uart->padconf); + v |= OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } +} + +static void omap_uart_disable_wakeup(struct omap_uart_state *uart) +{ + /* Clear wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + u32 v = __raw_readl(uart->wk_en); + v &= ~uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are cleared */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v = omap_ctrl_readw(uart->padconf); + v &= ~OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } +} + static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, int enable) { @@ -246,6 +292,11 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart) static void omap_uart_allow_sleep(struct omap_uart_state *uart) { + if (device_may_wakeup(&uart->pdev.dev)) + omap_uart_enable_wakeup(uart); + else + omap_uart_disable_wakeup(uart); + if (!uart->clocked) return; @@ -292,7 +343,6 @@ void omap_uart_resume_idle(int num) /* Check for normal UART wakeup */ if (__raw_readl(uart->wk_st) & uart->wk_mask) omap_uart_block_sleep(uart); - return; } } @@ -346,16 +396,13 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) return IRQ_NONE; } -static u32 sleep_timeout = DEFAULT_TIMEOUT; - static void omap_uart_idle_init(struct omap_uart_state *uart) { - u32 v; struct plat_serial8250_port *p = uart->p; int ret; uart->can_sleep = 0; - uart->timeout = sleep_timeout; + uart->timeout = DEFAULT_TIMEOUT; setup_timer(&uart->timer, omap_uart_idle_timer, (unsigned long) uart); mod_timer(&uart->timer, jiffies + uart->timeout); @@ -413,76 +460,101 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) uart->padconf = 0; } - /* Set wake-enable bit */ - if (uart->wk_en && uart->wk_mask) { - v = __raw_readl(uart->wk_en); - v |= uart->wk_mask; - __raw_writel(v, uart->wk_en); - } - - /* Ensure IOPAD wake-enables are set */ - if (cpu_is_omap34xx() && uart->padconf) { - u16 v; - - v = omap_ctrl_readw(uart->padconf); - v |= OMAP3_PADCONF_WAKEUPENABLE0; - omap_ctrl_writew(v, uart->padconf); - } - p->flags |= UPF_SHARE_IRQ; ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, "serial idle", (void *)uart); WARN_ON(ret); } -static ssize_t sleep_timeout_show(struct kobject *kobj, - struct kobj_attribute *attr, +void omap_uart_enable_irqs(int enable) +{ + int ret; + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (enable) + ret = request_irq(uart->p->irq, omap_uart_interrupt, + IRQF_SHARED, "serial idle", (void *)uart); + else + free_irq(uart->p->irq, (void *)uart); + } +} + +static ssize_t sleep_timeout_show(struct device *dev, + struct device_attribute *attr, char *buf) { - return sprintf(buf, "%u\n", sleep_timeout / HZ); + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_uart_state *uart = container_of(pdev, + struct omap_uart_state, pdev); + + return sprintf(buf, "%u\n", uart->timeout / HZ); } -static ssize_t sleep_timeout_store(struct kobject *kobj, - struct kobj_attribute *attr, +static ssize_t sleep_timeout_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t n) { - struct omap_uart_state *uart; + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_uart_state *uart = container_of(pdev, + struct omap_uart_state, pdev); unsigned int value; if (sscanf(buf, "%u", &value) != 1) { printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); return -EINVAL; } - sleep_timeout = value * HZ; - list_for_each_entry(uart, &uart_list, node) { - uart->timeout = sleep_timeout; - if (uart->timeout) - mod_timer(&uart->timer, jiffies + uart->timeout); - else - /* A zero value means disable timeout feature */ - omap_uart_block_sleep(uart); - } + + uart->timeout = value * HZ; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + /* A zero value means disable timeout feature */ + omap_uart_block_sleep(uart); + return n; } -static struct kobj_attribute sleep_timeout_attr = - __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); - +DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); +#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr)) #else static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} +#define DEV_CREATE_FILE(dev, attr) #endif /* CONFIG_PM */ -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, +static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = { + { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data0, + }, + }, + }, { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = serial_platform_data1, + }, + }, + }, { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = serial_platform_data2, + }, + }, }, }; void __init omap_serial_init(void) { - int i, err; + int i; const struct omap_uart_config *info; char name[16]; @@ -496,14 +568,12 @@ void __init omap_serial_init(void) if (info == NULL) return; - if (cpu_is_omap44xx()) { - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) - serial_platform_data[i].irq += 32; - } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - struct plat_serial8250_port *p = serial_platform_data + i; struct omap_uart_state *uart = &omap_uart[i]; + struct platform_device *pdev = &uart->pdev; + struct device *dev = &pdev->dev; + struct plat_serial8250_port *p = dev->platform_data; if (!(info->enabled_uarts & (1 << i))) { p->membase = NULL; @@ -531,20 +601,21 @@ void __init omap_serial_init(void) uart->num = i; p->private_data = uart; uart->p = p; - list_add(&uart->node, &uart_list); + list_add_tail(&uart->node, &uart_list); + + if (cpu_is_omap44xx()) + p->irq += 32; omap_uart_enable_clocks(uart); omap_uart_reset(uart); omap_uart_idle_init(uart); - } - - err = platform_device_register(&serial_device); - -#ifdef CONFIG_PM - if (!err) - err = sysfs_create_file(&serial_device.dev.kobj, - &sleep_timeout_attr.attr); -#endif + if (WARN_ON(platform_device_register(pdev))) + continue; + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(dev, true); + DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); + } + } } - diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index f41f8d96ddba..82aa4a3d160c 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -36,7 +36,7 @@ .text -/* r4 parameters */ +/* r1 parameters */ #define SDRC_NO_UNLOCK_DLL 0x0 #define SDRC_UNLOCK_DLL 0x1 @@ -58,7 +58,6 @@ /* SDRC_POWER bit settings */ #define SRFRONIDLEREQ_MASK 0x40 -#define PWDENA_MASK 0x4 /* CM_IDLEST1_CORE bit settings */ #define ST_SDRC_MASK 0x2 @@ -71,41 +70,72 @@ /* * omap3_sram_configure_core_dpll - change DPLL3 M2 divider - * r0 = new SDRC_RFR_CTRL register contents - * r1 = new SDRC_ACTIM_CTRLA register contents - * r2 = new SDRC_ACTIM_CTRLB register contents - * r3 = new M2 divider setting (only 1 and 2 supported right now) - * r4 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for + * + * Params passed in registers: + * r0 = new M2 divider setting (only 1 and 2 supported right now) + * r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for * SDRC rates < 83MHz - * r5 = number of MPU cycles to wait for SDRC to stabilize after + * r2 = number of MPU cycles to wait for SDRC to stabilize after * reprogramming the SDRC when switching to a slower MPU speed - * r6 = new SDRC_MR_0 register value - * r7 = increasing SDRC rate? (1 = yes, 0 = no) + * r3 = increasing SDRC rate? (1 = yes, 0 = no) + * + * Params passed via the stack. The needed params will be copied in SRAM + * before use by the code in SRAM (SDRAM is not accessible during SDRC + * reconfiguration): + * new SDRC_RFR_CTRL_0 register contents + * new SDRC_ACTIM_CTRL_A_0 register contents + * new SDRC_ACTIM_CTRL_B_0 register contents + * new SDRC_MR_0 register value + * new SDRC_RFR_CTRL_1 register contents + * new SDRC_ACTIM_CTRL_A_1 register contents + * new SDRC_ACTIM_CTRL_B_1 register contents + * new SDRC_MR_1 register value * + * If the param SDRC_RFR_CTRL_1 is 0, the parameters + * are not programmed into the SDRC CS1 registers */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack - ldr r4, [sp, #52] @ pull extra args off the stack - ldr r5, [sp, #56] @ load extra args from the stack - ldr r6, [sp, #60] @ load extra args from the stack - ldr r7, [sp, #64] @ load extra args from the stack + + @ pull the extra args off the stack + @ and store them in SRAM + ldr r4, [sp, #52] + str r4, omap_sdrc_rfr_ctrl_0_val + ldr r4, [sp, #56] + str r4, omap_sdrc_actim_ctrl_a_0_val + ldr r4, [sp, #60] + str r4, omap_sdrc_actim_ctrl_b_0_val + ldr r4, [sp, #64] + str r4, omap_sdrc_mr_0_val + ldr r4, [sp, #68] + str r4, omap_sdrc_rfr_ctrl_1_val + cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0, + beq skip_cs1_params @ do not use cs1 params + ldr r4, [sp, #72] + str r4, omap_sdrc_actim_ctrl_a_1_val + ldr r4, [sp, #76] + str r4, omap_sdrc_actim_ctrl_b_1_val + ldr r4, [sp, #80] + str r4, omap_sdrc_mr_1_val +skip_cs1_params: dsb @ flush buffered writes to interconnect - cmp r7, #1 @ if increasing SDRC clk rate, + + cmp r3, #1 @ if increasing SDRC clk rate, bleq configure_sdrc @ program the SDRC regs early (for RFR) - cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state + cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state bleq unlock_dll blne lock_dll bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC bl configure_core_dpll @ change the DPLL3 M2 divider + mov r12, r2 + bl wait_clk_stable @ wait for SDRC to stabilize bl enable_sdrc @ take SDRC out of idle - cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change + cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change bleq wait_dll_unlock blne wait_dll_lock - cmp r7, #1 @ if increasing SDRC clk rate, + cmp r3, #1 @ if increasing SDRC clk rate, beq return_to_sdram @ return to SDRAM code, otherwise, bl configure_sdrc @ reprogram SDRC regs now - mov r12, r5 - bl wait_clk_stable @ wait for SDRC to stabilize return_to_sdram: isb @ prevent speculative exec past here mov r0, #0 @ return value @@ -113,7 +143,7 @@ return_to_sdram: unlock_dll: ldr r11, omap3_sdrc_dlla_ctrl ldr r12, [r11] - and r12, r12, #FIXEDDELAY_MASK + bic r12, r12, #FIXEDDELAY_MASK orr r12, r12, #FIXEDDELAY_DEFAULT orr r12, r12, #DLLIDLE_MASK str r12, [r11] @ (no OCP barrier needed) @@ -129,7 +159,6 @@ sdram_in_selfrefresh: ldr r12, [r11] @ read the contents of SDRC_POWER mov r9, r12 @ keep a copy of SDRC_POWER bits orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle - bic r12, r12, #PWDENA_MASK @ clear PWDENA str r12, [r11] @ write back to SDRC_POWER register ldr r12, [r11] @ posted-write barrier for SDRC idle_sdrc: @@ -149,7 +178,7 @@ configure_core_dpll: ldr r12, [r11] ldr r10, core_m2_mask_val @ modify m2 for core dpll and r12, r12, r10 - orr r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT + orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT str r12, [r11] ldr r12, [r11] @ posted-write barrier for CM bx lr @@ -187,15 +216,34 @@ wait_dll_unlock: bne wait_dll_unlock bx lr configure_sdrc: - ldr r11, omap3_sdrc_rfr_ctrl - str r0, [r11] - ldr r11, omap3_sdrc_actim_ctrla - str r1, [r11] - ldr r11, omap3_sdrc_actim_ctrlb - str r2, [r11] + ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM + ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM + str r12, [r11] @ store + ldr r12, omap_sdrc_actim_ctrl_a_0_val + ldr r11, omap3_sdrc_actim_ctrl_a_0 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_b_0_val + ldr r11, omap3_sdrc_actim_ctrl_b_0 + str r12, [r11] + ldr r12, omap_sdrc_mr_0_val ldr r11, omap3_sdrc_mr_0 - str r6, [r11] - ldr r6, [r11] @ posted-write barrier for SDRC + str r12, [r11] + ldr r12, omap_sdrc_rfr_ctrl_1_val + cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0, + beq skip_cs1_prog @ do not program cs1 params + ldr r11, omap3_sdrc_rfr_ctrl_1 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_a_1_val + ldr r11, omap3_sdrc_actim_ctrl_a_1 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_b_1_val + ldr r11, omap3_sdrc_actim_ctrl_b_1 + str r12, [r11] + ldr r12, omap_sdrc_mr_1_val + ldr r11, omap3_sdrc_mr_1 + str r12, [r11] +skip_cs1_prog: + ldr r12, [r11] @ posted-write barrier for SDRC bx lr omap3_sdrc_power: @@ -206,14 +254,40 @@ omap3_cm_idlest1_core: .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST) omap3_cm_iclken1_core: .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1) -omap3_sdrc_rfr_ctrl: + +omap3_sdrc_rfr_ctrl_0: .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0) -omap3_sdrc_actim_ctrla: +omap3_sdrc_rfr_ctrl_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1) +omap3_sdrc_actim_ctrl_a_0: .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0) -omap3_sdrc_actim_ctrlb: +omap3_sdrc_actim_ctrl_a_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1) +omap3_sdrc_actim_ctrl_b_0: .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0) +omap3_sdrc_actim_ctrl_b_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1) omap3_sdrc_mr_0: .word OMAP34XX_SDRC_REGADDR(SDRC_MR_0) +omap3_sdrc_mr_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1) +omap_sdrc_rfr_ctrl_0_val: + .word 0xDEADBEEF +omap_sdrc_rfr_ctrl_1_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_a_0_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_a_1_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_b_0_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_b_1_val: + .word 0xDEADBEEF +omap_sdrc_mr_0_val: + .word 0xDEADBEEF +omap_sdrc_mr_1_val: + .word 0xDEADBEEF + omap3_sdrc_dlla_status: .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) omap3_sdrc_dlla_ctrl: @@ -223,3 +297,4 @@ core_m2_mask_val: ENTRY(omap3_sram_configure_core_dpll_sz) .word . - omap3_sram_configure_core_dpll + diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index d85296dc896c..739e59e8025c 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -155,20 +155,6 @@ static struct platform_device musb_device = { .resource = musb_resources, }; -#ifdef CONFIG_NOP_USB_XCEIV -static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32); - -static struct platform_device nop_xceiv_device = { - .name = "nop_usb_xceiv", - .id = -1, - .dev = { - .dma_mask = &nop_xceiv_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = NULL, - }, -}; -#endif - void __init usb_musb_init(void) { if (cpu_is_omap243x()) @@ -183,13 +169,6 @@ void __init usb_musb_init(void) */ musb_plat.clock = "ick"; -#ifdef CONFIG_NOP_USB_XCEIV - if (platform_device_register(&nop_xceiv_device) < 0) { - printk(KERN_ERR "Unable to register NOP-XCEIV device\n"); - return; - } -#endif - if (platform_device_register(&musb_device) < 0) { printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); return; diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 63b10d9bb1d3..9cd09465a0e8 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1141,12 +1141,16 @@ struct power_supply_info em_x270_psy_info = { static void em_x270_battery_low(void) { +#if defined(CONFIG_APM_EMULATION) apm_queue_event(APM_LOW_BATTERY); +#endif } static void em_x270_battery_critical(void) { +#if defined(CONFIG_APM_EMULATION) apm_queue_event(APM_CRITICAL_SUSPEND); +#endif } struct da9030_battery_info em_x270_batterty_info = { diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h index 16eb02552d5d..a3449e35a6f5 100644 --- a/arch/arm/mach-pxa/include/mach/audio.h +++ b/arch/arm/mach-pxa/include/mach/audio.h @@ -3,10 +3,12 @@ #include <sound/core.h> #include <sound/pcm.h> +#include <sound/ac97_codec.h> /* * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95) * a -1 value means no gpio will be used for reset + * @codec_pdata: AC97 codec platform_data * reset_gpio should only be specified for pxa27x CPUs where a silicon * bug prevents correct operation of the reset line. If not specified, @@ -20,6 +22,7 @@ typedef struct { void (*resume)(void *); void *priv; int reset_gpio; + void *codec_pdata[AC97_BUS_MAX_DEVICES]; } pxa2xx_audio_ops_t; extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h index ae8441192ef0..7139e0dc26d1 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h @@ -567,9 +567,9 @@ #define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3) #define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1) -#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X) -#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X) -#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X) +#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, AF0, DS01X) +#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, AF0, DS01X) +#define ULPI_STP MFP_CFG_DRV(ULPI_STP, AF0, DS01X) #endif /* CONFIG_CPU_PXA310 */ #endif /* __ASM_ARCH_MFP_PXA300_H */ diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index ed70f281dd09..169fcc18154e 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -128,6 +128,10 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO38_GPIO, /* wifi ready */ GPIO81_GPIO, /* wifi reset */ + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO39_FFUART_TXD, + /* HDD */ GPIO98_GPIO, /* HDD reset */ GPIO115_GPIO, /* HDD power */ diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index aae64a12a734..33f726ff55e5 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -111,6 +111,10 @@ static unsigned long palmt5_pin_config[] __initdata = { /* PWM */ GPIO16_PWM0_OUT, + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO39_FFUART_TXD, + /* MISC */ GPIO10_GPIO, /* hotsync button */ GPIO90_GPIO, /* power detect */ diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 6c15d84bde53..83d020879581 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -127,6 +127,10 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO76_LCD_PCLK, GPIO77_LCD_BIAS, + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO39_FFUART_TXD, + /* MISC. */ GPIO10_GPIO, /* hotsync button */ GPIO12_GPIO, /* power detect */ diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 6f678d93bf4e..09b7b1a10cad 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -250,7 +250,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0); static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ - INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"), INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"), diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c index a06f19edebb3..753ec4df17b9 100644 --- a/arch/arm/mach-pxa/treo680.c +++ b/arch/arm/mach-pxa/treo680.c @@ -409,7 +409,7 @@ err1: static void treo680_irda_shutdown(struct device *dev) { - gpio_free(GPIO_NR_TREO680_AMP_EN); + gpio_free(GPIO_NR_TREO680_IR_EN); } static struct pxaficp_platform_data treo680_ficp_info = { diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index cefd1c0a854a..84095440a878 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -197,10 +197,12 @@ static void __init zylonite_detect_lcd_panel(void) for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { id = id << 1; gpio = mfp_to_gpio(lcd_detect_pins[i]); + gpio_request(gpio, "LCD_ID_PINS"); gpio_direction_input(gpio); if (gpio_get_value(gpio)) id = id | 0x1; + gpio_free(gpio); } /* lcd id, flush out bit 1 */ diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index cc5a22833605..60d08f23f5e4 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -176,10 +176,12 @@ static void __init zylonite_detect_lcd_panel(void) for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { id = id << 1; gpio = mfp_to_gpio(lcd_detect_pins[i]); + gpio_request(gpio, "LCD_ID_PINS"); gpio_direction_input(gpio); if (gpio_get_value(gpio)) id = id | 0x1; + gpio_free(gpio); } /* lcd id, flush out bit 1 */ diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 9ea9c05093cd..facbd49eec67 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -208,8 +208,7 @@ struct platform_device realview_i2c_device = { static struct i2c_board_info realview_i2c_board_info[] = { { - I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1), - .type = "ds1338", + I2C_BOARD_INFO("ds1338", 0xd0 >> 1), }, }; diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h index 8fe192081d3a..f8b879a7973c 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h @@ -28,7 +28,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) return NULL; chip = &s3c24xx_gpios[pin/32]; - return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL; + return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL; } #endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 89b3ccf35e1b..2e9b8ccd8ec2 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -455,8 +455,8 @@ void __init u300_init_irq(void) for (i = 0; i < NR_IRQS; i++) set_bit(i, (unsigned long *) &mask[0]); u300_enable_intcon_clock(); - vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0); - vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0); + vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]); + vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]); } @@ -510,7 +510,7 @@ static struct db_chip db_chips[] __initdata = { } }; -static void u300_init_check_chip(void) +static void __init u300_init_check_chip(void) { u16 val; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 69214fc8bd19..31093af7d052 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -342,8 +342,7 @@ static struct platform_device versatile_i2c_device = { static struct i2c_board_info versatile_i2c_board_info[] = { { - I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1), - .type = "ds1338", + I2C_BOARD_INFO("ds1338", 0xd0 >> 1), }, }; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 8277802ec859..3a7279c1ce5e 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -120,6 +120,32 @@ void show_mem(void) printk("%d pages swap cached\n", cached); } +static void __init find_node_limits(int node, struct meminfo *mi, + unsigned long *min, unsigned long *max_low, unsigned long *max_high) +{ + int i; + + *min = -1UL; + *max_low = *max_high = 0; + + for_each_nodebank(i, mi, node) { + struct membank *bank = &mi->bank[i]; + unsigned long start, end; + + start = bank_pfn_start(bank); + end = bank_pfn_end(bank); + + if (*min > start) + *min = start; + if (*max_high < end) + *max_high = end; + if (bank->highmem) + continue; + if (*max_low < end) + *max_low = end; + } +} + /* * FIXME: We really want to avoid allocating the bootmap bitmap * over the top of the initrd. Hopefully, this is located towards @@ -210,41 +236,25 @@ static inline void map_memory_bank(struct membank *bank) #endif } -static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) +static void __init bootmem_init_node(int node, struct meminfo *mi, + unsigned long start_pfn, unsigned long end_pfn) { - unsigned long start_pfn, end_pfn, boot_pfn; + unsigned long boot_pfn; unsigned int boot_pages; pg_data_t *pgdat; int i; - start_pfn = -1UL; - end_pfn = 0; - /* - * Calculate the pfn range, and map the memory banks for this node. + * Map the memory banks for this node. */ for_each_nodebank(i, mi, node) { struct membank *bank = &mi->bank[i]; - unsigned long start, end; - start = bank_pfn_start(bank); - end = bank_pfn_end(bank); - - if (start_pfn > start) - start_pfn = start; - if (end_pfn < end) - end_pfn = end; - - map_memory_bank(bank); + if (!bank->highmem) + map_memory_bank(bank); } /* - * If there is no memory in this node, ignore it. - */ - if (end_pfn == 0) - return end_pfn; - - /* * Allocate the bootmem bitmap page. */ boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn); @@ -260,7 +270,8 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) for_each_nodebank(i, mi, node) { struct membank *bank = &mi->bank[i]; - free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); + if (!bank->highmem) + free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank)); } @@ -269,8 +280,6 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) */ reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT, boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT); - - return end_pfn; } static void __init bootmem_reserve_initrd(int node) @@ -297,33 +306,39 @@ static void __init bootmem_reserve_initrd(int node) static void __init bootmem_free_node(int node, struct meminfo *mi) { unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES]; - unsigned long start_pfn, end_pfn; - pg_data_t *pgdat = NODE_DATA(node); + unsigned long min, max_low, max_high; int i; - start_pfn = pgdat->bdata->node_min_pfn; - end_pfn = pgdat->bdata->node_low_pfn; + find_node_limits(node, mi, &min, &max_low, &max_high); /* * initialise the zones within this node. */ memset(zone_size, 0, sizeof(zone_size)); - memset(zhole_size, 0, sizeof(zhole_size)); /* * The size of this node has already been determined. If we need * to do anything fancy with the allocation of this memory to the * zones, now is the time to do it. */ - zone_size[0] = end_pfn - start_pfn; + zone_size[0] = max_low - min; +#ifdef CONFIG_HIGHMEM + zone_size[ZONE_HIGHMEM] = max_high - max_low; +#endif /* * For each bank in this node, calculate the size of the holes. * holes = node_size - sum(bank_sizes_in_node) */ - zhole_size[0] = zone_size[0]; - for_each_nodebank(i, mi, node) - zhole_size[0] -= bank_pfn_size(&mi->bank[i]); + memcpy(zhole_size, zone_size, sizeof(zhole_size)); + for_each_nodebank(i, mi, node) { + int idx = 0; +#ifdef CONFIG_HIGHMEM + if (mi->bank[i].highmem) + idx = ZONE_HIGHMEM; +#endif + zhole_size[idx] -= bank_pfn_size(&mi->bank[i]); + } /* * Adjust the sizes according to any special requirements for @@ -331,13 +346,13 @@ static void __init bootmem_free_node(int node, struct meminfo *mi) */ arch_adjust_zones(node, zone_size, zhole_size); - free_area_init_node(node, zone_size, start_pfn, zhole_size); + free_area_init_node(node, zone_size, min, zhole_size); } void __init bootmem_init(void) { struct meminfo *mi = &meminfo; - unsigned long memend_pfn = 0; + unsigned long min, max_low, max_high; int node, initrd_node; /* @@ -345,11 +360,29 @@ void __init bootmem_init(void) */ initrd_node = check_initrd(mi); + max_low = max_high = 0; + /* * Run through each node initialising the bootmem allocator. */ for_each_node(node) { - unsigned long end_pfn = bootmem_init_node(node, mi); + unsigned long node_low, node_high; + + find_node_limits(node, mi, &min, &node_low, &node_high); + + if (node_low > max_low) + max_low = node_low; + if (node_high > max_high) + max_high = node_high; + + /* + * If there is no memory in this node, ignore it. + * (We can't have nodes which have no lowmem) + */ + if (node_low == 0) + continue; + + bootmem_init_node(node, mi, min, node_low); /* * Reserve any special node zero regions. @@ -362,12 +395,6 @@ void __init bootmem_init(void) */ if (node == initrd_node) bootmem_reserve_initrd(node); - - /* - * Remember the highest memory PFN. - */ - if (end_pfn > memend_pfn) - memend_pfn = end_pfn; } /* @@ -383,7 +410,7 @@ void __init bootmem_init(void) for_each_node(node) bootmem_free_node(node, mi); - high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1; + high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1; /* * This doesn't seem to be used by the Linux memory manager any @@ -393,7 +420,8 @@ void __init bootmem_init(void) * Note: max_low_pfn and max_pfn reflect the number of _pages_ in * the system, not the maximum PFN. */ - max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET; + max_low_pfn = max_low - PHYS_PFN_OFFSET; + max_pfn = max_high - PHYS_PFN_OFFSET; } static inline int free_area(unsigned long pfn, unsigned long end, char *s) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4722582b17b8..4426ee67ceca 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -687,13 +687,19 @@ __early_param("vmalloc=", early_vmalloc); static void __init sanity_check_meminfo(void) { - int i, j; + int i, j, highmem = 0; for (i = 0, j = 0; i < meminfo.nr_banks; i++) { struct membank *bank = &meminfo.bank[j]; *bank = meminfo.bank[i]; #ifdef CONFIG_HIGHMEM + if (__va(bank->start) > VMALLOC_MIN || + __va(bank->start) < (void *)PAGE_OFFSET) + highmem = 1; + + bank->highmem = highmem; + /* * Split those memory banks which are partially overlapping * the vmalloc area greatly simplifying things later. @@ -714,6 +720,7 @@ static void __init sanity_check_meminfo(void) i++; bank[1].size -= VMALLOC_MIN - __va(bank->start); bank[1].start = __pa(VMALLOC_MIN - 1) + 1; + bank[1].highmem = highmem = 1; j++; } bank->size = VMALLOC_MIN - __va(bank->start); diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 27f8d1b2bc6b..2eb182f73876 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -602,6 +602,8 @@ enum iomux_pins { #define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) #define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) #define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI2_SCLK__I2C3_SCL IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1) #define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) #define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) #define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 843e8af64066..1868c0d8f9b5 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -78,10 +78,10 @@ static int omap_target(struct cpufreq_policy *policy, /* Ensure desired rate is within allowed range. Some govenors * (ondemand) will just pass target_freq=0 to get the minimum. */ - if (target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - if (target_freq > policy->cpuinfo.max_freq) - target_freq = policy->cpuinfo.max_freq; + if (target_freq < policy->min) + target_freq = policy->min; + if (target_freq > policy->max) + target_freq = policy->max; freqs.old = omap_getspeed(0); freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 7677a4a1cef2..9b00f4cbc903 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -946,7 +946,9 @@ void omap_start_dma(int lch) cur_lch = next_lch; } while (next_lch != -1); - } else if (cpu_class_is_omap2()) { + } else if (cpu_is_omap242x() || + (cpu_is_omap243x() && omap_type() <= OMAP2430_REV_ES1_0)) { + /* Errata: Need to write lch even if not using chaining */ dma_write(lch, CLNK_CTRL(lch)); } @@ -1125,6 +1127,11 @@ int omap_dma_running(void) void omap_dma_link_lch(int lch_head, int lch_queue) { if (omap_dma_in_1510_mode()) { + if (lch_head == lch_queue) { + dma_write(dma_read(CCR(lch_head)) | (3 << 8), + CCR(lch_head)); + return; + } printk(KERN_ERR "DMA linking is not supported in 1510 mode\n"); BUG(); return; @@ -1147,6 +1154,11 @@ EXPORT_SYMBOL(omap_dma_link_lch); void omap_dma_unlink_lch(int lch_head, int lch_queue) { if (omap_dma_in_1510_mode()) { + if (lch_head == lch_queue) { + dma_write(dma_read(CCR(lch_head)) & ~(3 << 8), + CCR(lch_head)); + return; + } printk(KERN_ERR "DMA linking is not supported in 1510 mode\n"); BUG(); return; diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 26b387c12423..9298bc0ab171 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -476,14 +476,12 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) __raw_writel(l, reg); } -static int __omap_get_gpio_datain(int gpio) +static int _get_gpio_datain(struct gpio_bank *bank, int gpio) { - struct gpio_bank *bank; void __iomem *reg; if (check_gpio(gpio) < 0) return -EINVAL; - bank = get_gpio_bank(gpio); reg = bank->base; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 @@ -524,6 +522,53 @@ static int __omap_get_gpio_datain(int gpio) & (1 << get_gpio_index(gpio))) != 0; } +static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg; + + if (check_gpio(gpio) < 0) + return -EINVAL; + reg = bank->base; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DATA_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DATAOUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP730 + case METHOD_GPIO_730: + reg += OMAP730_GPIO_DATA_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DATA_OUTPUT; + break; +#endif +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAOUT; + break; +#endif + default: + return -EINVAL; + } + + return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; +} + #define MOD_REG_BIT(reg, bit_mask, set) \ do { \ int l = __raw_readl(base + reg); \ @@ -1189,6 +1234,7 @@ static void gpio_mask_irq(unsigned int irq) struct gpio_bank *bank = get_irq_chip_data(irq); _set_gpio_irqenable(bank, gpio, 0); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); } static void gpio_unmask_irq(unsigned int irq) @@ -1196,6 +1242,11 @@ static void gpio_unmask_irq(unsigned int irq) unsigned int gpio = irq - IH_GPIO_BASE; struct gpio_bank *bank = get_irq_chip_data(irq); unsigned int irq_mask = 1 << get_gpio_index(gpio); + struct irq_desc *desc = irq_to_desc(irq); + u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK; + + if (trigger) + _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); /* For level-triggered GPIOs, the clearing must be done after * the HW source is cleared, thus after the handler has run */ @@ -1350,9 +1401,49 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset) return 0; } +static int gpio_is_input(struct gpio_bank *bank, int mask) +{ + void __iomem *reg = bank->base; + + switch (bank->method) { + case METHOD_MPUIO: + reg += OMAP_MPUIO_IO_CNTL; + break; + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DIRECTION; + break; + case METHOD_GPIO_730: + reg += OMAP730_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; + } + return __raw_readl(reg) & mask; +} + static int gpio_get(struct gpio_chip *chip, unsigned offset) { - return __omap_get_gpio_datain(chip->base + offset); + struct gpio_bank *bank; + void __iomem *reg; + int gpio; + u32 mask; + + gpio = chip->base + offset; + bank = get_gpio_bank(gpio); + reg = bank->base; + mask = 1 << get_gpio_index(gpio); + + if (gpio_is_input(bank, mask)) + return _get_gpio_datain(bank, gpio); + else + return _get_gpio_dataout(bank, gpio); } static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) @@ -1886,34 +1977,6 @@ arch_initcall(omap_gpio_sysinit); #include <linux/debugfs.h> #include <linux/seq_file.h> -static int gpio_is_input(struct gpio_bank *bank, int mask) -{ - void __iomem *reg = bank->base; - - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL; - break; - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; - } - return __raw_readl(reg) & mask; -} - - static int dbg_gpio_show(struct seq_file *s, void *unused) { unsigned i, j, gpio; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index f9f65e1ba3f1..4b8b0d65cbf2 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -20,6 +20,8 @@ struct clockdomain; struct clkops { int (*enable)(struct clk *); void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, u8 *); + void (*find_companion)(struct clk *, void __iomem **, u8 *); }; #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index 285eaa3a8275..11e73d9e8928 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -378,9 +378,6 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ cpu_is_omap44xx()) -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) - /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 #define OMAP2420_REV_ES1_0 0x24200024 @@ -436,5 +433,3 @@ IS_OMAP_TYPE(3430, 0x3430) int omap_chip_is(struct omap_chip_id oci); void omap2_check_revision(void); - -#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 73f483d56ca6..21fb0efdda86 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -228,7 +228,8 @@ extern void omap1_map_common_io(void); extern void omap1_init_common_hw(void); extern void omap2_map_common_io(void); -extern void omap2_init_common_hw(struct omap_sdrc_params *sp); +extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); #define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) #define __arch_iounmap(v) omap_iounmap(v) diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index bb154ea76769..63a3f254af7b 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -134,6 +134,11 @@ #define OMAP_MCBSP_REG_XCERG 0x74 #define OMAP_MCBSP_REG_XCERH 0x78 #define OMAP_MCBSP_REG_SYSCON 0x8C +#define OMAP_MCBSP_REG_THRSH2 0x90 +#define OMAP_MCBSP_REG_THRSH1 0x94 +#define OMAP_MCBSP_REG_IRQST 0xA0 +#define OMAP_MCBSP_REG_IRQEN 0xA4 +#define OMAP_MCBSP_REG_WAKEUPEN 0xA8 #define OMAP_MCBSP_REG_XCCR 0xAC #define OMAP_MCBSP_REG_RCCR 0xB0 @@ -249,8 +254,27 @@ #define RDISABLE 0x0001 /********************** McBSP SYSCONFIG bit definitions ********************/ +#define CLOCKACTIVITY(value) ((value)<<8) +#define SIDLEMODE(value) ((value)<<3) +#define ENAWAKEUP 0x0004 #define SOFTRST 0x0002 +/********************** McBSP DMA operating modes **************************/ +#define MCBSP_DMA_MODE_ELEMENT 0 +#define MCBSP_DMA_MODE_THRESHOLD 1 +#define MCBSP_DMA_MODE_FRAME 2 + +/********************** McBSP WAKEUPEN bit definitions *********************/ +#define XEMPTYEOFEN 0x4000 +#define XRDYEN 0x0400 +#define XEOFEN 0x0200 +#define XFSXEN 0x0100 +#define XSYNCERREN 0x0080 +#define RRDYEN 0x0008 +#define REOFEN 0x0004 +#define RFSREN 0x0002 +#define RSYNCERREN 0x0001 + /* we don't do multichannel for now */ struct omap_mcbsp_reg_cfg { u16 spcr2; @@ -344,6 +368,9 @@ struct omap_mcbsp_platform_data { u8 dma_rx_sync, dma_tx_sync; u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; +#ifdef CONFIG_ARCH_OMAP34XX + u16 buffer_size; +#endif }; struct omap_mcbsp { @@ -377,6 +404,11 @@ struct omap_mcbsp { struct omap_mcbsp_platform_data *pdata; struct clk *iclk; struct clk *fclk; +#ifdef CONFIG_ARCH_OMAP34XX + int dma_op_mode; + u16 max_tx_thres; + u16 max_rx_thres; +#endif }; extern struct omap_mcbsp **mcbsp_ptr; extern int omap_mcbsp_count; @@ -385,10 +417,25 @@ int omap_mcbsp_init(void); void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, int size); void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); +#ifdef CONFIG_ARCH_OMAP34XX +void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); +void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); +u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); +u16 omap_mcbsp_get_max_rx_threshold(unsigned int id); +int omap_mcbsp_get_dma_op_mode(unsigned int id); +#else +static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) +{ } +static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) +{ } +static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; } +static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; } +static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; } +#endif int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); -void omap_mcbsp_start(unsigned int id); -void omap_mcbsp_stop(unsigned int id); +void omap_mcbsp_start(unsigned int id, int tx, int rx); +void omap_mcbsp_stop(unsigned int id, int tx, int rx); void omap_mcbsp_xmit_word(unsigned int id, u32 word); u32 omap_mcbsp_recv_word(unsigned int id); diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 85a621705766..80281c458baf 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -853,6 +853,10 @@ enum omap34xx_index { AE5_34XX_GPIO143, H19_34XX_GPIO164_OUT, J25_34XX_GPIO170, + + /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ + H16_34XX_SDRC_CKE0, + H17_34XX_SDRC_CKE1, }; struct omap_mux_cfg { diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h index 24ac3c715912..cda2a70397b4 100644 --- a/arch/arm/plat-omap/include/mach/prcm.h +++ b/arch/arm/plat-omap/include/mach/prcm.h @@ -25,6 +25,7 @@ u32 omap_prcm_get_reset_sources(void); void omap_prcm_arch_reset(char mode); +int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name); #endif diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index adc73522491f..0be18e4ff182 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -30,6 +30,10 @@ #define SDRC_ACTIM_CTRL_A_0 0x09c #define SDRC_ACTIM_CTRL_B_0 0x0a0 #define SDRC_RFR_CTRL_0 0x0a4 +#define SDRC_MR_1 0x0B4 +#define SDRC_ACTIM_CTRL_A_1 0x0C4 +#define SDRC_ACTIM_CTRL_B_1 0x0C8 +#define SDRC_RFR_CTRL_1 0x0D4 /* * These values represent the number of memory clock cycles between @@ -102,8 +106,11 @@ struct omap_sdrc_params { u32 mr; }; -void __init omap2_sdrc_init(struct omap_sdrc_params *sp); -struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r); +void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1); #ifdef CONFIG_ARCH_OMAP2 diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h index 13abd02d1527..def0529c75eb 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -59,6 +59,7 @@ extern void omap_uart_check_wakeup(void); extern void omap_uart_prepare_suspend(void); extern void omap_uart_prepare_idle(int num); extern void omap_uart_resume_idle(int num); +extern void omap_uart_enable_irqs(int enable); #endif #endif diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index 4d53cc59d7a3..8974e3fc2691 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -21,11 +21,12 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); -extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f, u32 sdrc_mr, - u32 inc); +extern u32 omap3_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); @@ -59,12 +60,12 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f, u32 sdrc_mr, - u32 inc); +extern u32 omap3_sram_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); extern unsigned long omap3_sram_configure_core_dpll_sz; #endif diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index efa0e0111f38..8dc7927906f1 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -198,6 +198,170 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) } EXPORT_SYMBOL(omap_mcbsp_config); +#ifdef CONFIG_ARCH_OMAP34XX +/* + * omap_mcbsp_set_tx_threshold configures how to deal + * with transmit threshold. the threshold value and handler can be + * configure in here. + */ +void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) +{ + struct omap_mcbsp *mcbsp; + void __iomem *io_base; + + if (!cpu_is_omap34xx()) + return; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return; + } + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + + OMAP_MCBSP_WRITE(io_base, THRSH2, threshold); +} +EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold); + +/* + * omap_mcbsp_set_rx_threshold configures how to deal + * with receive threshold. the threshold value and handler can be + * configure in here. + */ +void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) +{ + struct omap_mcbsp *mcbsp; + void __iomem *io_base; + + if (!cpu_is_omap34xx()) + return; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return; + } + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + + OMAP_MCBSP_WRITE(io_base, THRSH1, threshold); +} +EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold); + +/* + * omap_mcbsp_get_max_tx_thres just return the current configured + * maximum threshold for transmission + */ +u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) +{ + struct omap_mcbsp *mcbsp; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return -ENODEV; + } + mcbsp = id_to_mcbsp_ptr(id); + + return mcbsp->max_tx_thres; +} +EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold); + +/* + * omap_mcbsp_get_max_rx_thres just return the current configured + * maximum threshold for reception + */ +u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) +{ + struct omap_mcbsp *mcbsp; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return -ENODEV; + } + mcbsp = id_to_mcbsp_ptr(id); + + return mcbsp->max_rx_thres; +} +EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold); + +/* + * omap_mcbsp_get_dma_op_mode just return the current configured + * operating mode for the mcbsp channel + */ +int omap_mcbsp_get_dma_op_mode(unsigned int id) +{ + struct omap_mcbsp *mcbsp; + int dma_op_mode; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1); + return -ENODEV; + } + mcbsp = id_to_mcbsp_ptr(id); + + spin_lock_irq(&mcbsp->lock); + dma_op_mode = mcbsp->dma_op_mode; + spin_unlock_irq(&mcbsp->lock); + + return dma_op_mode; +} +EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode); + +static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) +{ + /* + * Enable wakup behavior, smart idle and all wakeups + * REVISIT: some wakeups may be unnecessary + */ + if (cpu_is_omap34xx()) { + u16 syscon; + + syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); + syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03)); + + spin_lock_irq(&mcbsp->lock); + if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) { + syscon |= (ENAWAKEUP | SIDLEMODE(0x02) | + CLOCKACTIVITY(0x02)); + OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, + XRDYEN | RRDYEN); + } else { + syscon |= SIDLEMODE(0x01); + } + spin_unlock_irq(&mcbsp->lock); + + OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); + } +} + +static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) +{ + /* + * Disable wakup behavior, smart idle and all wakeups + */ + if (cpu_is_omap34xx()) { + u16 syscon; + + syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); + syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03)); + /* + * HW bug workaround - If no_idle mode is taken, we need to + * go to smart_idle before going to always_idle, or the + * device will not hit retention anymore. + */ + syscon |= SIDLEMODE(0x02); + OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); + + syscon &= ~(SIDLEMODE(0x03)); + OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); + + OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0); + } +} +#else +static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {} +static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {} +#endif + /* * We can choose between IRQ based or polled IO. * This needs to be called before omap_mcbsp_request(). @@ -257,6 +421,9 @@ int omap_mcbsp_request(unsigned int id) clk_enable(mcbsp->iclk); clk_enable(mcbsp->fclk); + /* Do procedure specific to omap34xx arch, if applicable */ + omap34xx_mcbsp_request(mcbsp); + /* * Make sure that transmitter, receiver and sample-rate generator are * not running before activating IRQs. @@ -305,6 +472,9 @@ void omap_mcbsp_free(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(id); + /* Do procedure specific to omap34xx arch, if applicable */ + omap34xx_mcbsp_free(mcbsp); + clk_disable(mcbsp->fclk); clk_disable(mcbsp->iclk); @@ -328,14 +498,15 @@ void omap_mcbsp_free(unsigned int id) EXPORT_SYMBOL(omap_mcbsp_free); /* - * Here we start the McBSP, by enabling the sample - * generator, both transmitter and receivers, - * and the frame sync. + * Here we start the McBSP, by enabling transmitter, receiver or both. + * If no transmitter or receiver is active prior calling, then sample-rate + * generator and frame sync are started. */ -void omap_mcbsp_start(unsigned int id) +void omap_mcbsp_start(unsigned int id, int tx, int rx) { struct omap_mcbsp *mcbsp; void __iomem *io_base; + int idle; u16 w; if (!omap_mcbsp_check_valid_id(id)) { @@ -348,32 +519,58 @@ void omap_mcbsp_start(unsigned int id) mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7; mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7; - /* Start the sample generator */ - w = OMAP_MCBSP_READ(io_base, SPCR2); - OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6)); + idle = !((OMAP_MCBSP_READ(io_base, SPCR2) | + OMAP_MCBSP_READ(io_base, SPCR1)) & 1); + + if (idle) { + /* Start the sample generator */ + w = OMAP_MCBSP_READ(io_base, SPCR2); + OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6)); + } /* Enable transmitter and receiver */ + tx &= 1; w = OMAP_MCBSP_READ(io_base, SPCR2); - OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1); + OMAP_MCBSP_WRITE(io_base, SPCR2, w | tx); + rx &= 1; w = OMAP_MCBSP_READ(io_base, SPCR1); - OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1); + OMAP_MCBSP_WRITE(io_base, SPCR1, w | rx); - udelay(100); + /* + * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec + * REVISIT: 100us may give enough time for two CLKSRG, however + * due to some unknown PM related, clock gating etc. reason it + * is now at 500us. + */ + udelay(500); - /* Start frame sync */ - w = OMAP_MCBSP_READ(io_base, SPCR2); - OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7)); + if (idle) { + /* Start frame sync */ + w = OMAP_MCBSP_READ(io_base, SPCR2); + OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7)); + } + + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + /* Release the transmitter and receiver */ + w = OMAP_MCBSP_READ(io_base, XCCR); + w &= ~(tx ? XDISABLE : 0); + OMAP_MCBSP_WRITE(io_base, XCCR, w); + w = OMAP_MCBSP_READ(io_base, RCCR); + w &= ~(rx ? RDISABLE : 0); + OMAP_MCBSP_WRITE(io_base, RCCR, w); + } /* Dump McBSP Regs */ omap_mcbsp_dump_reg(id); } EXPORT_SYMBOL(omap_mcbsp_start); -void omap_mcbsp_stop(unsigned int id) +void omap_mcbsp_stop(unsigned int id, int tx, int rx) { struct omap_mcbsp *mcbsp; void __iomem *io_base; + int idle; u16 w; if (!omap_mcbsp_check_valid_id(id)) { @@ -385,16 +582,33 @@ void omap_mcbsp_stop(unsigned int id) io_base = mcbsp->io_base; /* Reset transmitter */ + tx &= 1; + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + w = OMAP_MCBSP_READ(io_base, XCCR); + w |= (tx ? XDISABLE : 0); + OMAP_MCBSP_WRITE(io_base, XCCR, w); + } w = OMAP_MCBSP_READ(io_base, SPCR2); - OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1)); + OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~tx); /* Reset receiver */ + rx &= 1; + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + w = OMAP_MCBSP_READ(io_base, RCCR); + w |= (tx ? RDISABLE : 0); + OMAP_MCBSP_WRITE(io_base, RCCR, w); + } w = OMAP_MCBSP_READ(io_base, SPCR1); - OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1)); + OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~rx); - /* Reset the sample rate generator */ - w = OMAP_MCBSP_READ(io_base, SPCR2); - OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6)); + idle = !((OMAP_MCBSP_READ(io_base, SPCR2) | + OMAP_MCBSP_READ(io_base, SPCR1)) & 1); + + if (idle) { + /* Reset the sample rate generator */ + w = OMAP_MCBSP_READ(io_base, SPCR2); + OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6)); + } } EXPORT_SYMBOL(omap_mcbsp_stop); @@ -883,6 +1097,149 @@ void omap_mcbsp_set_spi_mode(unsigned int id, } EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); +#ifdef CONFIG_ARCH_OMAP34XX +#define max_thres(m) (mcbsp->pdata->buffer_size) +#define valid_threshold(m, val) ((val) <= max_thres(m)) +#define THRESHOLD_PROP_BUILDER(prop) \ +static ssize_t prop##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ + \ + return sprintf(buf, "%u\n", mcbsp->prop); \ +} \ + \ +static ssize_t prop##_store(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t size) \ +{ \ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ + unsigned long val; \ + int status; \ + \ + status = strict_strtoul(buf, 0, &val); \ + if (status) \ + return status; \ + \ + if (!valid_threshold(mcbsp, val)) \ + return -EDOM; \ + \ + mcbsp->prop = val; \ + return size; \ +} \ + \ +static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store); + +THRESHOLD_PROP_BUILDER(max_tx_thres); +THRESHOLD_PROP_BUILDER(max_rx_thres); + +static const char *dma_op_modes[] = { + "element", "threshold", "frame", +}; + +static ssize_t dma_op_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); + int dma_op_mode, i = 0; + ssize_t len = 0; + const char * const *s; + + spin_lock_irq(&mcbsp->lock); + dma_op_mode = mcbsp->dma_op_mode; + spin_unlock_irq(&mcbsp->lock); + + for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) { + if (dma_op_mode == i) + len += sprintf(buf + len, "[%s] ", *s); + else + len += sprintf(buf + len, "%s ", *s); + } + len += sprintf(buf + len, "\n"); + + return len; +} + +static ssize_t dma_op_mode_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); + const char * const *s; + int i = 0; + + for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) + if (sysfs_streq(buf, *s)) + break; + + if (i == ARRAY_SIZE(dma_op_modes)) + return -EINVAL; + + spin_lock_irq(&mcbsp->lock); + if (!mcbsp->free) { + size = -EBUSY; + goto unlock; + } + mcbsp->dma_op_mode = i; + +unlock: + spin_unlock_irq(&mcbsp->lock); + + return size; +} + +static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store); + +static const struct attribute *additional_attrs[] = { + &dev_attr_max_tx_thres.attr, + &dev_attr_max_rx_thres.attr, + &dev_attr_dma_op_mode.attr, + NULL, +}; + +static const struct attribute_group additional_attr_group = { + .attrs = (struct attribute **)additional_attrs, +}; + +static inline int __devinit omap_additional_add(struct device *dev) +{ + return sysfs_create_group(&dev->kobj, &additional_attr_group); +} + +static inline void __devexit omap_additional_remove(struct device *dev) +{ + sysfs_remove_group(&dev->kobj, &additional_attr_group); +} + +static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) +{ + mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; + if (cpu_is_omap34xx()) { + mcbsp->max_tx_thres = max_thres(mcbsp); + mcbsp->max_rx_thres = max_thres(mcbsp); + /* + * REVISIT: Set dmap_op_mode to THRESHOLD as default + * for mcbsp2 instances. + */ + if (omap_additional_add(mcbsp->dev)) + dev_warn(mcbsp->dev, + "Unable to create additional controls\n"); + } else { + mcbsp->max_tx_thres = -EINVAL; + mcbsp->max_rx_thres = -EINVAL; + } +} + +static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) +{ + if (cpu_is_omap34xx()) + omap_additional_remove(mcbsp->dev); +} +#else +static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {} +static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {} +#endif /* CONFIG_ARCH_OMAP34XX */ + /* * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. * 730 has only 2 McBSP, and both of them are MPU peripherals. @@ -953,6 +1310,10 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) mcbsp->dev = &pdev->dev; mcbsp_ptr[id] = mcbsp; platform_set_drvdata(pdev, mcbsp); + + /* Initialize mcbsp properties for OMAP34XX if needed / applicable */ + omap34xx_device_init(mcbsp); + return 0; err_fclk: @@ -976,6 +1337,8 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev) mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(mcbsp->id); + omap34xx_device_exit(mcbsp); + clk_disable(mcbsp->fclk); clk_disable(mcbsp->iclk); clk_put(mcbsp->fclk); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 4ea73804d21e..5eae7876979c 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -44,9 +44,9 @@ #define OMAP2_SRAM_VA 0xe3000000 #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800) #define OMAP3_SRAM_PA 0x40200000 -#define OMAP3_SRAM_VA 0xd7000000 +#define OMAP3_SRAM_VA 0xe3000000 #define OMAP3_SRAM_PUB_PA 0x40208000 -#define OMAP3_SRAM_PUB_VA 0xd7008000 +#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) #define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ #define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/ @@ -373,20 +373,26 @@ static inline int omap243x_sram_init(void) #ifdef CONFIG_ARCH_OMAP3 -static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, - u32 m2, u32 unlock_dll, - u32 f, u32 sdrc_mr, u32 inc); -u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll, - u32 f, u32 sdrc_mr, u32 inc) +static u32 (*_omap3_sram_configure_core_dpll)( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); + +u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) { BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, - sdrc_actim_ctrla, - sdrc_actim_ctrlb, m2, - unlock_dll, f, sdrc_mr, inc); + return _omap3_sram_configure_core_dpll( + m2, unlock_dll, f, inc, + sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, + sdrc_actim_ctrl_b_0, sdrc_mr_0, + sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, + sdrc_actim_ctrl_b_1, sdrc_mr_1); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index 9646a94ed3d0..07c430fdc9ef 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -11,6 +11,8 @@ #ifndef __PLAT_GPIO_H #define __PLAT_GPIO_H +#include <linux/init.h> + /* * GENERIC_GPIO primitives. */ diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index abc79d44acaa..98548c6903a0 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -16,7 +16,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/sysdev.h> -#include <linux/bootmem.h> +#include <linux/slab.h> #include <mach/gpio.h> @@ -112,17 +112,12 @@ static int __init pxa_init_gpio_chip(int gpio_end) int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1; struct pxa_gpio_chip *chips; - /* this is early, we have to use bootmem allocator, and we really - * want this to be allocated dynamically for different 'gpio_end' - */ - chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip)); + chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL); if (chips == NULL) { pr_err("%s: failed to allocate GPIO chips\n", __func__); return -ENOMEM; } - memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip)); - for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { struct gpio_chip *c = &chips[i].chip; diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h new file mode 100644 index 000000000000..0f440b9168db --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/audio-simtec.h @@ -0,0 +1,37 @@ +/* arch/arm/plat-s3c/include/plat/audio-simtec.h + * + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Simtec Audio support. +*/ + +/** + * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio + * @use_mpllin: Select codec clock from MPLLin + * @output_cdclk: Need to output CDCLK to the codec + * @have_mic: Set if we have a MIC socket + * @have_lout: Set if we have a LineOut socket + * @amp_gpio: GPIO pin to enable the AMP + * @amp_gain: Option GPIO to control AMP gain + */ +struct s3c24xx_audio_simtec_pdata { + unsigned int use_mpllin:1; + unsigned int output_cdclk:1; + + unsigned int have_mic:1; + unsigned int have_lout:1; + + int amp_gpio; + int amp_gain[2]; + + void (*startup)(void); +}; + +extern int simtec_audio_add(const char *codec_name, + struct s3c24xx_audio_simtec_pdata *pdata); diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h index 0fad7571030e..07659dad1748 100644 --- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h +++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h @@ -33,6 +33,11 @@ #define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) #define S3C2412_IISCON_IIS_ACTIVE (1 << 0) +#define S3C64XX_IISMOD_BLC_16BIT (0 << 13) +#define S3C64XX_IISMOD_BLC_8BIT (1 << 13) +#define S3C64XX_IISMOD_BLC_24BIT (2 << 13) +#define S3C64XX_IISMOD_BLC_MASK (3 << 13) + #define S3C64XX_IISMOD_IMS_PCLK (0 << 10) #define S3C64XX_IISMOD_IMS_SYSMUX (1 << 10) diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c index 5b75a797b5ab..0afb217a775e 100644 --- a/arch/arm/plat-s3c24xx/clock-dclk.c +++ b/arch/arm/plat-s3c24xx/clock-dclk.c @@ -129,7 +129,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) /* calculate the MISCCR setting for the clock */ - if (parent == &clk_xtal) + if (parent == &clk_mpll) source = S3C2410_MISCCR_CLK0_MPLL; else if (parent == &clk_upll) source = S3C2410_MISCCR_CLK0_UPLL; diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c index 0120b760315b..82a6d4de02a3 100644 --- a/arch/arm/plat-s3c24xx/pwm.c +++ b/arch/arm/plat-s3c24xx/pwm.c @@ -246,6 +246,10 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) tcmp = duty_ns / tin_ns; tcmp = tcnt - tcmp; + /* the pwm hw only checks the compare register after a decrement, + so the pin never toggles if tcmp = tcnt */ + if (tcmp == tcnt) + tcmp--; pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt); diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c index 07a6516a4f3c..47632fc7eb66 100644 --- a/arch/arm/plat-s3c64xx/pm.c +++ b/arch/arm/plat-s3c64xx/pm.c @@ -117,8 +117,6 @@ void s3c_pm_save_core(void) * this. */ -#include <plat/regs-gpio.h> - static void s3c64xx_cpu_suspend(void) { unsigned long tmp; diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 1debc1f9f987..febac1950d8e 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -153,7 +153,7 @@ static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk, u32 div; if (parent < rate) - return rate; + return parent; div = (parent / rate) - 1; if (div > armclk_mask) @@ -175,7 +175,7 @@ static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) div = clk_get_rate(clk->parent) / rate; val = __raw_readl(S3C_CLK_DIV0); - val &= armclk_mask; + val &= ~armclk_mask; val |= (div - 1); __raw_writel(val, S3C_CLK_DIV0); diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c index d41200382208..6d6b1a468eda 100644 --- a/arch/arm/plat-stmp3xxx/pinmux.c +++ b/arch/arm/plat-stmp3xxx/pinmux.c @@ -22,7 +22,6 @@ #include <linux/sysdev.h> #include <linux/string.h> #include <linux/bitops.h> -#include <linux/sysdev.h> #include <linux/irq.h> #include <mach/hardware.h> |