diff options
Diffstat (limited to 'arch/arm')
197 files changed, 1874 insertions, 865 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 0531da8e5216..3e988f6b45bc 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1145,7 +1145,7 @@ config DEBUG_UART_8250_FLOW_CONTROL config DEBUG_UNCOMPRESS bool - depends on ARCH_MULTIPLATFORM || ARCH_MSM + depends on ARCH_MULTIPLATFORM || ARCH_MSM || ARCH_EXYNOS default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) help @@ -1161,7 +1161,8 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string - default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM + default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ + ARCH_EXYNOS default "mach/uncompress.h" config EARLY_PRINTK diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9d6a8b485e0..032030361bef 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb # sama5d3 +dtb-$(CONFIG_ARCH_AT91) += at91-sama5d3_xplained.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb @@ -208,7 +209,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-n900.dtb \ omap3-n9.dtb \ omap3-n950.dtb \ - omap3-tobi.dtb \ + omap3-overo-tobi.dtb \ + omap3-overo-storm-tobi.dtb \ omap3-gta04.dtb \ omap3-igep0020.dtb \ omap3-igep0030.dtb \ diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 4718ec4a4dbf..486880b74831 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -121,7 +121,7 @@ ti,model = "AM335x-EVMSK"; ti,audio-codec = <&tlv320aic3106>; ti,mcasp-controller = <&mcasp1>; - ti,codec-clock-rate = <24576000>; + ti,codec-clock-rate = <24000000>; ti,audio-routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT"; @@ -256,6 +256,12 @@ >; }; + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ @@ -456,6 +462,9 @@ status = "okay"; vmmc-supply = <&vmmc_reg>; bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; &sham { diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 66609684d41b..9480cf891f8c 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -23,6 +23,7 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; + eth3 = ð3; }; cpus { @@ -291,7 +292,7 @@ interrupts = <91>; }; - ethernet@34000 { + eth3: ethernet@34000 { compatible = "marvell,armada-370-neta"; reg = <0x34000 0x4000>; interrupts = <14>; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts new file mode 100644 index 000000000000..ce1375595e5f --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -0,0 +1,229 @@ +/* + * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board + * + * Copyright (C) 2014 Atmel, + * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" + +/ { + model = "SAMA5D3 Xplained"; + compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + ahb { + apb { + mmc0: mmc@f0000000 { + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <8>; + cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>; + }; + }; + + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>; + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + status = "okay"; + }; + + usart0: serial@f001c000 { + status = "okay"; + }; + + usart1: serial@f0020000 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + status = "okay"; + }; + + uart0: serial@f0024000 { + status = "okay"; + }; + + mmc1: mmc@f8000000 { + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>; + }; + }; + + spi1: spi@f8008000 { + cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>; + status = "okay"; + }; + + adc0: adc@f8018000 { + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad7 + &pinctrl_adc0_ad8 + &pinctrl_adc0_ad9 + >; + status = "okay"; + }; + + i2c2: i2c@f801c000 { + dmas = <0>, <0>; /* Do not use DMA for i2c2 */ + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + dbgu: serial@ffffee00 { + status = "okay"; + }; + + pinctrl@fffff200 { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */ + }; + }; + }; + + pmc: pmc@fffffc00 { + main: mainck { + clock-frequency = <12000000>; + }; + }; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + + usb0: gadget@00500000 { + atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00600000 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 3 GPIO_ACTIVE_LOW + &pioE 4 GPIO_ACTIVE_LOW + >; + status = "okay"; + }; + + usb2: ehci@00700000 { + status = "okay"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + bp3 { + label = "PB_USER"; + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + gpio-key,wakeup; + }; + }; + + leds { + compatible = "gpio-leds"; + + d2 { + label = "d2"; + gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */ + linux,default-trigger = "heartbeat"; + }; + + d3 { + label = "d3"; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 0042f73068b0..fece8665fb63 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -523,7 +523,7 @@ }; i2c0: i2c@fff88000 { - compatible = "atmel,at91sam9263-i2c"; + compatible = "atmel,at91sam9260-i2c"; reg = <0xfff88000 0x100>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index e9487f6f0166..924a6a6ffd0f 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -124,6 +124,10 @@ nand-on-flash-bbt; status = "okay"; }; + + usb0: ohci@00500000 { + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 2b76524f4aa7..187fd46b7b5e 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -379,15 +379,6 @@ #clock-cells = <1>; }; - pmu_intc: pmu-interrupt-ctrl@d0050 { - compatible = "marvell,dove-pmu-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xd0050 0x8>; - interrupts = <33>; - marvell,#interrupts = <7>; - }; - pinctrl: pin-ctrl@d0200 { compatible = "marvell,dove-pinctrl"; reg = <0xd0200 0x10>; @@ -610,8 +601,6 @@ rtc: real-time-clock@d8500 { compatible = "marvell,orion-rtc"; reg = <0xd8500 0x20>; - interrupt-parent = <&pmu_intc>; - interrupts = <5>; }; gpio2: gpio-ctrl@e8400 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 08452e183b57..28b5ec79f339 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -19,6 +19,7 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/clock/exynos4.h> #include "skeleton.dtsi" / { @@ -119,7 +120,7 @@ compatible = "samsung,exynos4210-fimc"; reg = <0x11800000 0x1000>; interrupts = <0 84 0>; - clocks = <&clock 256>, <&clock 128>; + clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>; clock-names = "fimc", "sclk_fimc"; samsung,power-domain = <&pd_cam>; samsung,sysreg = <&sys_reg>; @@ -130,7 +131,7 @@ compatible = "samsung,exynos4210-fimc"; reg = <0x11810000 0x1000>; interrupts = <0 85 0>; - clocks = <&clock 257>, <&clock 129>; + clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>; clock-names = "fimc", "sclk_fimc"; samsung,power-domain = <&pd_cam>; samsung,sysreg = <&sys_reg>; @@ -141,7 +142,7 @@ compatible = "samsung,exynos4210-fimc"; reg = <0x11820000 0x1000>; interrupts = <0 86 0>; - clocks = <&clock 258>, <&clock 130>; + clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>; clock-names = "fimc", "sclk_fimc"; samsung,power-domain = <&pd_cam>; samsung,sysreg = <&sys_reg>; @@ -152,7 +153,7 @@ compatible = "samsung,exynos4210-fimc"; reg = <0x11830000 0x1000>; interrupts = <0 87 0>; - clocks = <&clock 259>, <&clock 131>; + clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>; clock-names = "fimc", "sclk_fimc"; samsung,power-domain = <&pd_cam>; samsung,sysreg = <&sys_reg>; @@ -163,7 +164,7 @@ compatible = "samsung,exynos4210-csis"; reg = <0x11880000 0x4000>; interrupts = <0 78 0>; - clocks = <&clock 260>, <&clock 134>; + clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>; clock-names = "csis", "sclk_csis"; bus-width = <4>; samsung,power-domain = <&pd_cam>; @@ -178,7 +179,7 @@ compatible = "samsung,exynos4210-csis"; reg = <0x11890000 0x4000>; interrupts = <0 80 0>; - clocks = <&clock 261>, <&clock 135>; + clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>; clock-names = "csis", "sclk_csis"; bus-width = <2>; samsung,power-domain = <&pd_cam>; @@ -194,7 +195,7 @@ compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; interrupts = <0 43 0>; - clocks = <&clock 345>; + clocks = <&clock CLK_WDT>; clock-names = "watchdog"; status = "disabled"; }; @@ -203,7 +204,7 @@ compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupts = <0 44 0>, <0 45 0>; - clocks = <&clock 346>; + clocks = <&clock CLK_RTC>; clock-names = "rtc"; status = "disabled"; }; @@ -212,7 +213,7 @@ compatible = "samsung,s5pv210-keypad"; reg = <0x100A0000 0x100>; interrupts = <0 109 0>; - clocks = <&clock 347>; + clocks = <&clock CLK_KEYIF>; clock-names = "keypad"; status = "disabled"; }; @@ -221,7 +222,7 @@ compatible = "samsung,exynos4210-sdhci"; reg = <0x12510000 0x100>; interrupts = <0 73 0>; - clocks = <&clock 297>, <&clock 145>; + clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; }; @@ -230,7 +231,7 @@ compatible = "samsung,exynos4210-sdhci"; reg = <0x12520000 0x100>; interrupts = <0 74 0>; - clocks = <&clock 298>, <&clock 146>; + clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; }; @@ -239,7 +240,7 @@ compatible = "samsung,exynos4210-sdhci"; reg = <0x12530000 0x100>; interrupts = <0 75 0>; - clocks = <&clock 299>, <&clock 147>; + clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; }; @@ -248,7 +249,7 @@ compatible = "samsung,exynos4210-sdhci"; reg = <0x12540000 0x100>; interrupts = <0 76 0>; - clocks = <&clock 300>, <&clock 148>; + clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; }; @@ -257,7 +258,7 @@ compatible = "samsung,exynos4210-ehci"; reg = <0x12580000 0x100>; interrupts = <0 70 0>; - clocks = <&clock 304>; + clocks = <&clock CLK_USB_HOST>; clock-names = "usbhost"; status = "disabled"; }; @@ -266,7 +267,7 @@ compatible = "samsung,exynos4210-ohci"; reg = <0x12590000 0x100>; interrupts = <0 70 0>; - clocks = <&clock 304>; + clocks = <&clock CLK_USB_HOST>; clock-names = "usbhost"; status = "disabled"; }; @@ -276,7 +277,7 @@ reg = <0x13400000 0x10000>; interrupts = <0 94 0>; samsung,power-domain = <&pd_mfc>; - clocks = <&clock 273>; + clocks = <&clock CLK_MFC>; clock-names = "mfc"; status = "disabled"; }; @@ -285,7 +286,7 @@ compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; interrupts = <0 52 0>; - clocks = <&clock 312>, <&clock 151>; + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -294,7 +295,7 @@ compatible = "samsung,exynos4210-uart"; reg = <0x13810000 0x100>; interrupts = <0 53 0>; - clocks = <&clock 313>, <&clock 152>; + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -303,7 +304,7 @@ compatible = "samsung,exynos4210-uart"; reg = <0x13820000 0x100>; interrupts = <0 54 0>; - clocks = <&clock 314>, <&clock 153>; + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -312,7 +313,7 @@ compatible = "samsung,exynos4210-uart"; reg = <0x13830000 0x100>; interrupts = <0 55 0>; - clocks = <&clock 315>, <&clock 154>; + clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -323,7 +324,7 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x13860000 0x100>; interrupts = <0 58 0>; - clocks = <&clock 317>; + clocks = <&clock CLK_I2C0>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_bus>; @@ -336,7 +337,7 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x13870000 0x100>; interrupts = <0 59 0>; - clocks = <&clock 318>; + clocks = <&clock CLK_I2C1>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_bus>; @@ -349,7 +350,7 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x13880000 0x100>; interrupts = <0 60 0>; - clocks = <&clock 319>; + clocks = <&clock CLK_I2C2>; clock-names = "i2c"; status = "disabled"; }; @@ -360,7 +361,7 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x13890000 0x100>; interrupts = <0 61 0>; - clocks = <&clock 320>; + clocks = <&clock CLK_I2C3>; clock-names = "i2c"; status = "disabled"; }; @@ -371,7 +372,7 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x138A0000 0x100>; interrupts = <0 62 0>; - clocks = <&clock 321>; + clocks = <&clock CLK_I2C4>; clock-names = "i2c"; status = "disabled"; }; @@ -382,7 +383,7 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x138B0000 0x100>; interrupts = <0 63 0>; - clocks = <&clock 322>; + clocks = <&clock CLK_I2C5>; clock-names = "i2c"; status = "disabled"; }; @@ -393,7 +394,7 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x138C0000 0x100>; interrupts = <0 64 0>; - clocks = <&clock 323>; + clocks = <&clock CLK_I2C6>; clock-names = "i2c"; status = "disabled"; }; @@ -404,7 +405,7 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x138D0000 0x100>; interrupts = <0 65 0>; - clocks = <&clock 324>; + clocks = <&clock CLK_I2C7>; clock-names = "i2c"; status = "disabled"; }; @@ -417,7 +418,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 327>, <&clock 159>; + clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; clock-names = "spi", "spi_busclk0"; pinctrl-names = "default"; pinctrl-0 = <&spi0_bus>; @@ -432,7 +433,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 328>, <&clock 160>; + clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; clock-names = "spi", "spi_busclk0"; pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; @@ -447,7 +448,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 329>, <&clock 161>; + clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; clock-names = "spi", "spi_busclk0"; pinctrl-names = "default"; pinctrl-0 = <&spi2_bus>; @@ -458,7 +459,7 @@ compatible = "samsung,exynos4210-pwm"; reg = <0x139D0000 0x1000>; interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; - clocks = <&clock 336>; + clocks = <&clock CLK_PWM>; clock-names = "timers"; #pwm-cells = <2>; status = "disabled"; @@ -475,7 +476,7 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x12680000 0x1000>; interrupts = <0 35 0>; - clocks = <&clock 292>; + clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; @@ -486,7 +487,7 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x12690000 0x1000>; interrupts = <0 36 0>; - clocks = <&clock 293>; + clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; @@ -497,7 +498,7 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x12850000 0x1000>; interrupts = <0 34 0>; - clocks = <&clock 279>; + clocks = <&clock CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; @@ -511,7 +512,7 @@ reg = <0x11c00000 0x20000>; interrupt-names = "fifo", "vsync", "lcd_sys"; interrupts = <11 0>, <11 1>, <11 2>; - clocks = <&clock 140>, <&clock 283>; + clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; samsung,power-domain = <&pd_lcd0>; status = "disabled"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 48ecd7a755ab..cb0e768dc6d4 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -53,7 +53,7 @@ reg = <0x10050000 0x800>; interrupt-parent = <&mct_map>; interrupts = <0>, <1>, <2>, <3>, <4>, <5>; - clocks = <&clock 3>, <&clock 344>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; mct_map: mct-map { @@ -109,7 +109,7 @@ interrupt-parent = <&combiner>; reg = <0x100C0000 0x100>; interrupts = <2 4>; - clocks = <&clock 383>; + clocks = <&clock CLK_TMU_APBIF>; clock-names = "tmu_apbif"; status = "disabled"; }; @@ -118,13 +118,14 @@ compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; interrupts = <0 89 0>; - clocks = <&clock 177>, <&clock 277>; + clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; camera { - clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>; + clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, + <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; fimc_0: fimc@11800000 { diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 9804fcb71f8c..12459b01cca3 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -251,7 +251,7 @@ buck2_reg: BUCK2 { regulator-name = "vdd_arm"; regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 6bc053924e9e..388f03579661 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -459,8 +459,8 @@ buck2_reg: BUCK2 { regulator-name = "vdd_arm"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1300000>; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 5c412aa14738..e0eb6bb64c34 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -47,7 +47,7 @@ reg = <0x10050000 0x800>; interrupt-parent = <&mct_map>; interrupts = <0>, <1>, <2>, <3>, <4>; - clocks = <&clock 3>, <&clock 344>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; mct_map: mct-map { @@ -97,13 +97,14 @@ compatible = "samsung,exynos4212-g2d"; reg = <0x10800000 0x1000>; interrupts = <0 89 0>; - clocks = <&clock 177>, <&clock 277>; + clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; camera { - clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>; + clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, + <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; fimc_0: fimc@11800000 { @@ -145,7 +146,7 @@ reg = <0x12390000 0x1000>; interrupts = <0 105 0>; samsung,power-domain = <&pd_isp>; - clocks = <&clock 353>; + clocks = <&clock CLK_FIMC_LITE0>; clock-names = "flite"; status = "disabled"; }; @@ -155,7 +156,7 @@ reg = <0x123A0000 0x1000>; interrupts = <0 106 0>; samsung,power-domain = <&pd_isp>; - clocks = <&clock 354>; + clocks = <&clock CLK_FIMC_LITE1>; clock-names = "flite"; status = "disabled"; }; @@ -165,12 +166,19 @@ reg = <0x12000000 0x260000>; interrupts = <0 90 0>, <0 95 0>; samsung,power-domain = <&pd_isp>; - clocks = <&clock 353>, <&clock 354>, <&clock 355>, - <&clock 356>, <&clock 17>, <&clock 357>, - <&clock 358>, <&clock 359>, <&clock 360>, - <&clock 450>,<&clock 451>, <&clock 452>, - <&clock 453>, <&clock 176>, <&clock 13>, - <&clock 454>, <&clock 395>, <&clock 455>; + clocks = <&clock CLK_FIMC_LITE0>, + <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>, + <&clock CLK_PPMUISPMX>, + <&clock CLK_MOUT_MPLL_USER_T>, + <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>, + <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>, + <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>, + <&clock CLK_DIV_MCUISP0>, + <&clock CLK_DIV_MCUISP1>, + <&clock CLK_SCLK_UART_ISP>, + <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>, + <&clock CLK_ACLK400_MCUISP>, + <&clock CLK_DIV_ACLK400_MCUISP>; clock-names = "lite0", "lite1", "ppmuispx", "ppmuispmx", "mpll", "isp", "drc", "fd", "mcuisp", @@ -190,7 +198,7 @@ i2c1_isp: i2c-isp@12140000 { compatible = "samsung,exynos4212-i2c-isp"; reg = <0x12140000 0x100>; - clocks = <&clock 370>; + clocks = <&clock CLK_I2C1_ISP>; clock-names = "i2c_isp"; #address-cells = <1>; #size-cells = <0>; @@ -205,7 +213,7 @@ #address-cells = <1>; #size-cells = <0>; fifo-depth = <0x80>; - clocks = <&clock 301>, <&clock 149>; + clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>; clock-names = "biu", "ciu"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 258dca441f36..79d0608d6dcc 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -81,13 +81,6 @@ status = "disabled"; }; - watchdog { - compatible = "samsung,s3c2410-wdt"; - reg = <0x101D0000 0x100>; - interrupts = <0 42 0>; - status = "disabled"; - }; - fimd@14400000 { compatible = "samsung,exynos5250-fimd"; interrupt-parent = <&combiner>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index b42e658876e5..56c40783c3eb 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -25,6 +25,10 @@ bootargs = "console=ttySAC2,115200"; }; + rtc@101E0000 { + status = "okay"; + }; + codec@11000000 { samsung,mfc-r = <0x43000000 0x800000>; samsung,mfc-l = <0x51000000 0x800000>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 3e69837c435c..f76946e97e6a 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -27,6 +27,10 @@ bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; + rtc@101E0000 { + status = "okay"; + }; + i2c@12C60000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; @@ -36,6 +40,148 @@ compatible = "samsung,s524ad0xd1"; reg = <0x50>; }; + + max77686@09 { + compatible = "maxim,max77686"; + reg = <0x09>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "P1.0V_LDO_OUT1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "P1.2V_LDO_OUT2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "P1.8V_LDO_OUT3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "P2.8V_LDO_OUT4"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "P1.8V_LDO_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "P1.1V_LDO_OUT6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo11_reg: LDO11 { + regulator-name = "P1.8V_LDO_OUT11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "P1.8V_LDO_OUT13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; }; vdd: fixed-regulator@0 { diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 7e45eea2d78f..b13bf499f5e2 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -20,6 +20,10 @@ i2c104 = &i2c_104; }; + rtc@101E0000 { + status = "okay"; + }; + pinctrl@11400000 { sd3_clk: sd3-clk { samsung,pin-drv = <0>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index b7dec41e32af..987cfbe9634b 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -17,6 +17,7 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/clock/exynos5250.h> #include "exynos5.dtsi" #include "exynos5250-pinctrl.dtsi" @@ -90,7 +91,8 @@ compatible = "samsung,exynos5250-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; - clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, + <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>; clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; @@ -115,7 +117,7 @@ interrupt-parent = <&mct_map>; interrupts = <0 0>, <1 0>, <2 0>, <3 0>, <4 0>, <5 0>; - clocks = <&clock 1>, <&clock 335>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; mct_map: mct-map { @@ -167,16 +169,25 @@ interrupts = <0 47 0>; }; - watchdog { - clocks = <&clock 336>; + pmu_system_controller: system-controller@10040000 { + compatible = "samsung,exynos5250-pmu", "syscon"; + reg = <0x10040000 0x5000>; + }; + + watchdog@101D0000 { + compatible = "samsung,exynos5250-wdt"; + reg = <0x101D0000 0x100>; + interrupts = <0 42 0>; + clocks = <&clock CLK_WDT>; clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; }; g2d@10850000 { compatible = "samsung,exynos5250-g2d"; reg = <0x10850000 0x1000>; interrupts = <0 91 0>; - clocks = <&clock 345>; + clocks = <&clock CLK_G2D>; clock-names = "fimg2d"; }; @@ -185,41 +196,41 @@ reg = <0x11000000 0x10000>; interrupts = <0 96 0>; samsung,power-domain = <&pd_mfc>; - clocks = <&clock 266>; + clocks = <&clock CLK_MFC>; clock-names = "mfc"; }; rtc@101E0000 { - clocks = <&clock 337>; + clocks = <&clock CLK_RTC>; clock-names = "rtc"; - status = "okay"; + status = "disabled"; }; tmu@10060000 { compatible = "samsung,exynos5250-tmu"; reg = <0x10060000 0x100>; interrupts = <0 65 0>; - clocks = <&clock 338>; + clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; }; serial@12C00000 { - clocks = <&clock 289>, <&clock 146>; + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C10000 { - clocks = <&clock 290>, <&clock 147>; + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C20000 { - clocks = <&clock 291>, <&clock 148>; + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C30000 { - clocks = <&clock 292>, <&clock 149>; + clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; }; @@ -227,7 +238,7 @@ compatible = "samsung,exynos5-sata-ahci"; reg = <0x122F0000 0x1ff>; interrupts = <0 115 0>; - clocks = <&clock 277>, <&clock 143>; + clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>; clock-names = "sata", "sclk_sata"; }; @@ -242,7 +253,7 @@ interrupts = <0 56 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 294>; + clocks = <&clock CLK_I2C0>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_bus>; @@ -255,7 +266,7 @@ interrupts = <0 57 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 295>; + clocks = <&clock CLK_I2C1>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_bus>; @@ -268,7 +279,7 @@ interrupts = <0 58 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 296>; + clocks = <&clock CLK_I2C2>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c2_bus>; @@ -281,7 +292,7 @@ interrupts = <0 59 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 297>; + clocks = <&clock CLK_I2C3>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c3_bus>; @@ -294,7 +305,7 @@ interrupts = <0 60 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 298>; + clocks = <&clock CLK_I2C4>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c4_bus>; @@ -307,7 +318,7 @@ interrupts = <0 61 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 299>; + clocks = <&clock CLK_I2C5>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c5_bus>; @@ -320,7 +331,7 @@ interrupts = <0 62 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 300>; + clocks = <&clock CLK_I2C6>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c6_bus>; @@ -333,7 +344,7 @@ interrupts = <0 63 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 301>; + clocks = <&clock CLK_I2C7>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c7_bus>; @@ -346,7 +357,7 @@ interrupts = <0 64 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 302>; + clocks = <&clock CLK_I2C_HDMI>; clock-names = "i2c"; status = "disabled"; }; @@ -356,7 +367,7 @@ reg = <0x121D0000 0x100>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 288>; + clocks = <&clock CLK_SATA_PHYI2C>; clock-names = "i2c"; status = "disabled"; }; @@ -371,7 +382,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 304>, <&clock 154>; + clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; clock-names = "spi", "spi_busclk0"; pinctrl-names = "default"; pinctrl-0 = <&spi0_bus>; @@ -387,7 +398,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 305>, <&clock 155>; + clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; clock-names = "spi", "spi_busclk0"; pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; @@ -403,7 +414,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 306>, <&clock 156>; + clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; clock-names = "spi", "spi_busclk0"; pinctrl-names = "default"; pinctrl-0 = <&spi2_bus>; @@ -415,7 +426,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x12200000 0x1000>; - clocks = <&clock 280>, <&clock 139>; + clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; clock-names = "biu", "ciu"; fifo-depth = <0x80>; status = "disabled"; @@ -427,7 +438,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x12210000 0x1000>; - clocks = <&clock 281>, <&clock 140>; + clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; clock-names = "biu", "ciu"; fifo-depth = <0x80>; status = "disabled"; @@ -439,7 +450,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x12220000 0x1000>; - clocks = <&clock 282>, <&clock 141>; + clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; clock-names = "biu", "ciu"; fifo-depth = <0x80>; status = "disabled"; @@ -451,7 +462,7 @@ interrupts = <0 78 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 283>, <&clock 142>; + clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; clock-names = "biu", "ciu"; fifo-depth = <0x80>; status = "disabled"; @@ -481,7 +492,7 @@ dmas = <&pdma1 12 &pdma1 11>; dma-names = "tx", "rx"; - clocks = <&clock 307>, <&clock 157>; + clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>; clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s1_bus>; @@ -494,7 +505,7 @@ dmas = <&pdma0 12 &pdma0 11>; dma-names = "tx", "rx"; - clocks = <&clock 308>, <&clock 158>; + clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>; clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s2_bus>; @@ -502,7 +513,7 @@ usb@12000000 { compatible = "samsung,exynos5250-dwusb3"; - clocks = <&clock 286>; + clocks = <&clock CLK_USB3>; clock-names = "usbdrd30"; #address-cells = <1>; #size-cells = <1>; @@ -519,7 +530,7 @@ usb3_phy: usbphy@12100000 { compatible = "samsung,exynos5250-usb3phy"; reg = <0x12100000 0x100>; - clocks = <&clock 1>, <&clock 286>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB3>; clock-names = "ext_xtal", "usbdrd30"; #address-cells = <1>; #size-cells = <1>; @@ -535,7 +546,7 @@ reg = <0x12110000 0x100>; interrupts = <0 71 0>; - clocks = <&clock 285>; + clocks = <&clock CLK_USB2>; clock-names = "usbhost"; }; @@ -544,14 +555,14 @@ reg = <0x12120000 0x100>; interrupts = <0 71 0>; - clocks = <&clock 285>; + clocks = <&clock CLK_USB2>; clock-names = "usbhost"; }; usb2_phy: usbphy@12130000 { compatible = "samsung,exynos5250-usb2phy"; reg = <0x12130000 0x100>; - clocks = <&clock 1>, <&clock 285>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>; clock-names = "ext_xtal", "usbhost"; #address-cells = <1>; #size-cells = <1>; @@ -568,7 +579,7 @@ reg = <0x12dd0000 0x100>; samsung,pwm-outputs = <0>, <1>, <2>, <3>; #pwm-cells = <3>; - clocks = <&clock 311>; + clocks = <&clock CLK_PWM>; clock-names = "timers"; }; @@ -583,7 +594,7 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; interrupts = <0 34 0>; - clocks = <&clock 275>; + clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; @@ -594,7 +605,7 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; interrupts = <0 35 0>; - clocks = <&clock 276>; + clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; @@ -605,7 +616,7 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x10800000 0x1000>; interrupts = <0 33 0>; - clocks = <&clock 346>; + clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; @@ -616,7 +627,7 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; interrupts = <0 124 0>; - clocks = <&clock 271>; + clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; @@ -629,7 +640,7 @@ reg = <0x13e00000 0x1000>; interrupts = <0 85 0>; samsung,power-domain = <&pd_gsc>; - clocks = <&clock 256>; + clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; }; @@ -638,7 +649,7 @@ reg = <0x13e10000 0x1000>; interrupts = <0 86 0>; samsung,power-domain = <&pd_gsc>; - clocks = <&clock 257>; + clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; }; @@ -647,7 +658,7 @@ reg = <0x13e20000 0x1000>; interrupts = <0 87 0>; samsung,power-domain = <&pd_gsc>; - clocks = <&clock 258>; + clocks = <&clock CLK_GSCL2>; clock-names = "gscl"; }; @@ -656,7 +667,7 @@ reg = <0x13e30000 0x1000>; interrupts = <0 88 0>; samsung,power-domain = <&pd_gsc>; - clocks = <&clock 259>; + clocks = <&clock CLK_GSCL3>; clock-names = "gscl"; }; @@ -664,8 +675,9 @@ compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; - clocks = <&clock 344>, <&clock 136>, <&clock 137>, - <&clock 159>, <&clock 1024>; + clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, + <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, + <&clock CLK_MOUT_HDMI>; clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; }; @@ -674,7 +686,7 @@ compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; - clocks = <&clock 343>, <&clock 136>; + clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "sclk_hdmi"; }; @@ -685,14 +697,14 @@ }; dp-controller@145B0000 { - clocks = <&clock 342>; + clocks = <&clock CLK_DP>; clock-names = "dp"; phys = <&dp_phy>; phy-names = "dp"; }; fimd@14400000 { - clocks = <&clock 133>, <&clock 339>; + clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; }; @@ -700,7 +712,7 @@ compatible = "samsung,exynos-adc-v1"; reg = <0x12D10000 0x100>, <0x10040718 0x4>; interrupts = <0 106 0>; - clocks = <&clock 303>; + clocks = <&clock CLK_ADC>; clock-names = "adc"; #io-channel-cells = <1>; io-channel-ranges; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 7340745ff979..f509e8fc290f 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -11,6 +11,8 @@ /dts-v1/; #include "exynos5420.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> / { model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; @@ -31,6 +33,10 @@ }; }; + rtc@101E0000 { + status = "okay"; + }; + mmc@12200000 { status = "okay"; broken-cd; @@ -41,6 +47,7 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + vmmc-supply = <&ldo10_reg>; slot@0 { reg = <0>; @@ -57,10 +64,301 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + vmmc-supply = <&ldo10_reg>; slot@0 { reg = <0>; bus-width = <4>; }; }; + + hsi2c_4: i2c@12CA0000 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + s2mps11,buck2-ramp-delay = <12>; + s2mps11,buck34-ramp-delay = <12>; + s2mps11,buck16-ramp-delay = <12>; + s2mps11,buck6-ramp-enable = <1>; + s2mps11,buck2-ramp-enable = <1>; + s2mps11,buck3-ramp-enable = <1>; + s2mps11,buck4-ramp-enable = <1>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "PVDD_ALIVE_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "PVDD_APIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo3_reg: LDO3 { + regulator-name = "PVDD_APIO_MMCON_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "PVDD_ADC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "PVDD_PLL_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "PVDD_ANAIP_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "PVDD_ANAIP_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "PVDD_ABB_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "PVDD_USB_3V3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "PVDD_PRE_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "PVDD_USB_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "PVDD_HSIC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "PVDD_APIO_MMCOFF_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "PVDD_PERI_2V8"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "PVDD_PERI_3V3"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "PVDD_EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "PVDD_TFLASH_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "PVDD_BTWIFI_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: LDO21 { + regulator-name = "PVDD_CAM1IO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "PVDD_MIFS_1V1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "PVDD_CAM1_AVDD_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "PVDD_CAM0_AF_2V8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "PVDD_G3DS_1V0"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "PVDD_TSP_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "PVDD_AUDIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo31_reg: LDO31 { + regulator-name = "PVDD_PERI_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo32_reg: LDO32 { + regulator-name = "PVDD_LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "PVDD_CAM0IO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "PVDD_CAM0_DVDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo38_reg: LDO38 { + regulator-name = "PVDD_CAM0_AVDD_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "PVDD_MIF_1V1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "PVDD_INT_1V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "PVDD_G3D_1V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "PVDD_LPDDR3_1V2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "PVDD_KFC_1V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VIN_LLDO_1V4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "VIN_MLDO_2V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "VIN_HLDO_3V5"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "PVDD_EMMCF_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + wakeup { + label = "SW-TACT1"; + gpios = <&gpx2 7 1>; + linux,code = <KEY_WAKEUP>; + gpio-key,wakeup; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index fb5a1e25c632..ae1ee0470fca 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -31,6 +31,43 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd: fixed-regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + dbvdd: fixed-regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "dbvdd-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + spkvdd: fixed-regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "spkvdd-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; + + rtc@101E0000 { + status = "okay"; + }; + mmc@12200000 { status = "okay"; broken-cd; @@ -120,4 +157,220 @@ reg = <0x50>; }; }; + + hsi2c_4: i2c@12CA0000 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + s2mps11,buck2-ramp-delay = <12>; + s2mps11,buck34-ramp-delay = <12>; + s2mps11,buck16-ramp-delay = <12>; + s2mps11,buck6-ramp-enable = <1>; + s2mps11,buck2-ramp-enable = <1>; + s2mps11,buck3-ramp-enable = <1>; + s2mps11,buck4-ramp-enable = <1>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_ldo6"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "vdd_ldo16"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "tsp_avdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo19_reg: LDO19 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "tsp_io"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_mem"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1.0v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_1.8v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2.8v_ldo"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3750000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_vmem"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 8db792b26f79..e3329afbd8c4 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -13,6 +13,7 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/clock/exynos5420.h> #include "exynos5.dtsi" #include "exynos5420-pinctrl.dtsi" @@ -119,7 +120,8 @@ compatible = "samsung,exynos5420-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; - clocks = <&clock 1>, <&clock 5>, <&clock 148>, <&clock 149>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, + <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; @@ -127,7 +129,7 @@ compatible = "samsung,mfc-v7"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; - clocks = <&clock 401>; + clocks = <&clock CLK_MFC>; clock-names = "mfc"; }; @@ -137,7 +139,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x12200000 0x2000>; - clocks = <&clock 351>, <&clock 132>; + clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; clock-names = "biu", "ciu"; fifo-depth = <0x40>; status = "disabled"; @@ -149,7 +151,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x12210000 0x2000>; - clocks = <&clock 352>, <&clock 133>; + clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; clock-names = "biu", "ciu"; fifo-depth = <0x40>; status = "disabled"; @@ -161,7 +163,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x12220000 0x1000>; - clocks = <&clock 353>, <&clock 134>; + clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; clock-names = "biu", "ciu"; fifo-depth = <0x40>; status = "disabled"; @@ -175,7 +177,7 @@ interrupt-parent = <&mct_map>; interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, <9>, <10>, <11>; - clocks = <&clock 1>, <&clock 315>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; mct_map: mct-map { @@ -269,9 +271,9 @@ }; rtc@101E0000 { - clocks = <&clock 317>; + clocks = <&clock CLK_RTC>; clock-names = "rtc"; - status = "okay"; + status = "disabled"; }; amba { @@ -281,11 +283,22 @@ interrupt-parent = <&gic>; ranges; + adma: adma@03880000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x03880000 0x1000>; + interrupts = <0 110 0>; + clocks = <&clock_audss EXYNOS_ADMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <6>; + #dma-requests = <16>; + }; + pdma0: pdma@121A0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; interrupts = <0 34 0>; - clocks = <&clock 362>; + clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; @@ -296,7 +309,7 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; interrupts = <0 35 0>; - clocks = <&clock 363>; + clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; @@ -307,7 +320,7 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x10800000 0x1000>; interrupts = <0 33 0>; - clocks = <&clock 473>; + clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; @@ -318,7 +331,7 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; interrupts = <0 124 0>; - clocks = <&clock 442>; + clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; @@ -326,6 +339,49 @@ }; }; + i2s0: i2s@03830000 { + compatible = "samsung,exynos5420-i2s"; + reg = <0x03830000 0x100>; + dmas = <&adma 0 + &adma 2 + &adma 1>; + dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + samsung,idma-addr = <0x03000000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + status = "disabled"; + }; + + i2s1: i2s@12D60000 { + compatible = "samsung,exynos5420-i2s"; + reg = <0x12D60000 0x100>; + dmas = <&pdma1 12 + &pdma1 11>; + dma-names = "tx", "rx"; + clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>; + clock-names = "iis", "i2s_opclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + status = "disabled"; + }; + + i2s2: i2s@12D70000 { + compatible = "samsung,exynos5420-i2s"; + reg = <0x12D70000 0x100>; + dmas = <&pdma0 12 + &pdma0 11>; + dma-names = "tx", "rx"; + clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>; + clock-names = "iis", "i2s_opclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + status = "disabled"; + }; + spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; @@ -337,7 +393,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&spi0_bus>; - clocks = <&clock 271>, <&clock 135>; + clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; clock-names = "spi", "spi_busclk0"; status = "disabled"; }; @@ -353,7 +409,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; - clocks = <&clock 272>, <&clock 136>; + clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; clock-names = "spi", "spi_busclk0"; status = "disabled"; }; @@ -369,28 +425,28 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&spi2_bus>; - clocks = <&clock 273>, <&clock 137>; + clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; clock-names = "spi", "spi_busclk0"; status = "disabled"; }; serial@12C00000 { - clocks = <&clock 257>, <&clock 128>; + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C10000 { - clocks = <&clock 258>, <&clock 129>; + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C20000 { - clocks = <&clock 259>, <&clock 130>; + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C30000 { - clocks = <&clock 260>, <&clock 131>; + clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; }; @@ -399,7 +455,7 @@ reg = <0x12dd0000 0x100>; samsung,pwm-outputs = <0>, <1>, <2>, <3>; #pwm-cells = <3>; - clocks = <&clock 279>; + clocks = <&clock CLK_PWM>; clock-names = "timers"; }; @@ -410,7 +466,7 @@ }; dp-controller@145B0000 { - clocks = <&clock 412>; + clocks = <&clock CLK_DP1>; clock-names = "dp"; phys = <&dp_phy>; phy-names = "dp"; @@ -418,7 +474,7 @@ fimd@14400000 { samsung,power-domain = <&disp_pd>; - clocks = <&clock 147>, <&clock 421>; + clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; }; @@ -426,7 +482,7 @@ compatible = "samsung,exynos-adc-v2"; reg = <0x12D10000 0x100>, <0x10040720 0x4>; interrupts = <0 106 0>; - clocks = <&clock 270>; + clocks = <&clock CLK_TSADC>; clock-names = "adc"; #io-channel-cells = <1>; io-channel-ranges; @@ -439,7 +495,7 @@ interrupts = <0 56 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 261>; + clocks = <&clock CLK_I2C0>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_bus>; @@ -452,7 +508,7 @@ interrupts = <0 57 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 262>; + clocks = <&clock CLK_I2C1>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_bus>; @@ -465,7 +521,7 @@ interrupts = <0 58 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 263>; + clocks = <&clock CLK_I2C2>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c2_bus>; @@ -478,7 +534,7 @@ interrupts = <0 59 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 264>; + clocks = <&clock CLK_I2C3>; clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c3_bus>; @@ -493,7 +549,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c4_hs_bus>; - clocks = <&clock 265>; + clocks = <&clock CLK_I2C4>; clock-names = "hsi2c"; status = "disabled"; }; @@ -506,7 +562,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c5_hs_bus>; - clocks = <&clock 266>; + clocks = <&clock CLK_I2C5>; clock-names = "hsi2c"; status = "disabled"; }; @@ -519,7 +575,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c6_hs_bus>; - clocks = <&clock 267>; + clocks = <&clock CLK_I2C6>; clock-names = "hsi2c"; status = "disabled"; }; @@ -532,7 +588,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c7_hs_bus>; - clocks = <&clock 268>; + clocks = <&clock CLK_I2C7>; clock-names = "hsi2c"; status = "disabled"; }; @@ -545,7 +601,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c8_hs_bus>; - clocks = <&clock 281>; + clocks = <&clock CLK_I2C8>; clock-names = "hsi2c"; status = "disabled"; }; @@ -558,7 +614,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c9_hs_bus>; - clocks = <&clock 282>; + clocks = <&clock CLK_I2C9>; clock-names = "hsi2c"; status = "disabled"; }; @@ -571,7 +627,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c10_hs_bus>; - clocks = <&clock 283>; + clocks = <&clock CLK_I2C10>; clock-names = "hsi2c"; status = "disabled"; }; @@ -580,8 +636,9 @@ compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; - clocks = <&clock 413>, <&clock 143>, <&clock 768>, - <&clock 158>, <&clock 640>; + clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, + <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, + <&clock CLK_MOUT_HDMI>; clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; status = "disabled"; @@ -591,7 +648,7 @@ compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; - clocks = <&clock 431>, <&clock 143>; + clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "sclk_hdmi"; }; @@ -599,7 +656,7 @@ compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = <0 85 0>; - clocks = <&clock 465>; + clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; samsung,power-domain = <&gsc_pd>; }; @@ -608,16 +665,21 @@ compatible = "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = <0 86 0>; - clocks = <&clock 466>; + clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; samsung,power-domain = <&gsc_pd>; }; + pmu_system_controller: system-controller@10040000 { + compatible = "samsung,exynos5420-pmu", "syscon"; + reg = <0x10040000 0x5000>; + }; + tmu_cpu0: tmu@10060000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10060000 0x100>; interrupts = <0 65 0>; - clocks = <&clock 318>; + clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; }; @@ -625,7 +687,7 @@ compatible = "samsung,exynos5420-tmu"; reg = <0x10064000 0x100>; interrupts = <0 183 0>; - clocks = <&clock 318>; + clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; }; @@ -633,7 +695,7 @@ compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x10068000 0x100>, <0x1006c000 0x4>; interrupts = <0 184 0>; - clocks = <&clock 318>, <&clock 318>; + clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; }; @@ -641,7 +703,7 @@ compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x1006c000 0x100>, <0x100a0000 0x4>; interrupts = <0 185 0>; - clocks = <&clock 318>, <&clock 319>; + clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; }; @@ -649,7 +711,16 @@ compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x100a0000 0x100>, <0x10068000 0x4>; interrupts = <0 215 0>; - clocks = <&clock 319>, <&clock 318>; + clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; }; + + watchdog@101D0000 { + compatible = "samsung,exynos5420-wdt"; + reg = <0x101D0000 0x100>; + interrupts = <0 42 0>; + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; + }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 02a0a1226cef..75c7b89cec2f 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -9,6 +9,7 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/clock/exynos5440.h> #include "skeleton.dtsi" / { @@ -105,7 +106,7 @@ compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; interrupts = <0 2 0>; - clocks = <&clock 21>, <&clock 21>; + clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; clock-names = "uart", "clk_uart_baud0"; }; @@ -113,7 +114,7 @@ compatible = "samsung,exynos4210-uart"; reg = <0xC0000 0x1000>; interrupts = <0 3 0>; - clocks = <&clock 21>, <&clock 21>; + clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; clock-names = "uart", "clk_uart_baud0"; }; @@ -125,7 +126,7 @@ #size-cells = <0>; samsung,spi-src-clk = <0>; num-cs = <1>; - clocks = <&clock 21>, <&clock 16>; + clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>; clock-names = "spi", "spi_busclk0"; }; @@ -161,7 +162,7 @@ interrupts = <0 5 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 21>; + clocks = <&clock CLK_B_125>; clock-names = "i2c"; }; @@ -171,7 +172,7 @@ interrupts = <0 6 0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clock 21>; + clocks = <&clock CLK_B_125>; clock-names = "i2c"; }; @@ -179,7 +180,7 @@ compatible = "samsung,s3c2410-wdt"; reg = <0x110000 0x1000>; interrupts = <0 1 0>; - clocks = <&clock 21>; + clocks = <&clock CLK_B_125>; clock-names = "watchdog"; }; @@ -190,7 +191,7 @@ interrupts = <0 31 4>; interrupt-names = "macirq"; phy-mode = "sgmii"; - clocks = <&clock 25>; + clocks = <&clock CLK_GMAC0>; clock-names = "stmmaceth"; }; @@ -206,7 +207,7 @@ compatible = "samsung,s3c6410-rtc"; reg = <0x130000 0x1000>; interrupts = <0 17 0>, <0 16 0>; - clocks = <&clock 21>; + clocks = <&clock CLK_B_125>; clock-names = "rtc"; }; @@ -214,7 +215,7 @@ compatible = "samsung,exynos5440-tmu"; reg = <0x160118 0x230>, <0x160368 0x10>; interrupts = <0 58 0>; - clocks = <&clock 21>; + clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; }; @@ -222,7 +223,7 @@ compatible = "samsung,exynos5440-tmu"; reg = <0x16011C 0x230>, <0x160368 0x10>; interrupts = <0 58 0>; - clocks = <&clock 21>; + clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; }; @@ -230,7 +231,7 @@ compatible = "samsung,exynos5440-tmu"; reg = <0x160120 0x230>, <0x160368 0x10>; interrupts = <0 58 0>; - clocks = <&clock 21>; + clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; }; @@ -238,7 +239,7 @@ compatible = "snps,exynos5440-ahci"; reg = <0x210000 0x10000>; interrupts = <0 30 0>; - clocks = <&clock 23>; + clocks = <&clock CLK_SATA>; clock-names = "sata"; }; @@ -246,7 +247,7 @@ compatible = "samsung,exynos5440-ohci"; reg = <0x220000 0x1000>; interrupts = <0 29 0>; - clocks = <&clock 24>; + clocks = <&clock CLK_USB>; clock-names = "usbhost"; }; @@ -254,7 +255,7 @@ compatible = "samsung,exynos5440-ehci"; reg = <0x221000 0x1000>; interrupts = <0 29 0>; - clocks = <&clock 24>; + clocks = <&clock CLK_USB>; clock-names = "usbhost"; }; @@ -264,7 +265,7 @@ 0x270000 0x1000 0x271000 0x40>; interrupts = <0 20 0>, <0 21 0>, <0 22 0>; - clocks = <&clock 28>, <&clock 27>; + clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>; clock-names = "pcie", "pcie_bus"; #address-cells = <3>; #size-cells = <2>; @@ -285,7 +286,7 @@ 0x272000 0x1000 0x271040 0x40>; interrupts = <0 23 0>, <0 24 0>, <0 25 0>; - clocks = <&clock 29>, <&clock 27>; + clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>; clock-names = "pcie", "pcie_bus"; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index fd8fc7cd53f3..5bfae54fb780 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -52,12 +52,6 @@ }; }; - codec: spdif-transmitter { - compatible = "linux,spdif-dit"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_spdif>; - }; - sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; @@ -111,7 +105,7 @@ }; pinctrl_hummingboard_spdif: hummingboard-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>; + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { @@ -142,6 +136,8 @@ }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_spdif>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 64daa3b311f6..c2a24888a276 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -46,12 +46,6 @@ }; }; - codec: spdif-transmitter { - compatible = "linux,spdif-dit"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_spdif>; - }; - sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; @@ -89,7 +83,7 @@ }; pinctrl_cubox_i_spdif: cubox-i-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>; + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { @@ -121,6 +115,8 @@ }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_spdif>; status = "okay"; }; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index e6be9315ff0a..b10e6351da53 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -18,6 +18,28 @@ bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk"; }; + /* 24 MHz chrystal on the core module */ + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + /* The UART clock is 14.74 MHz divided by an ICS525 */ + uartclk: uartclk@14.74M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <14745600>; + }; + syscon { compatible = "arm,integrator-ap-syscon"; reg = <0x11000000 0x100>; @@ -28,14 +50,17 @@ timer0: timer@13000000 { compatible = "arm,integrator-timer"; + clocks = <&xtal24mhz>; }; timer1: timer@13000100 { compatible = "arm,integrator-timer"; + clocks = <&xtal24mhz>; }; timer2: timer@13000200 { compatible = "arm,integrator-timer"; + clocks = <&xtal24mhz>; }; pic: pic@14000000 { @@ -92,26 +117,36 @@ rtc: rtc@15000000 { compatible = "arm,pl030", "arm,primecell"; arm,primecell-periphid = <0x00041030>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; uart0: uart@16000000 { compatible = "arm,pl010", "arm,primecell"; arm,primecell-periphid = <0x00041010>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; uart1: uart@17000000 { compatible = "arm,pl010", "arm,primecell"; arm,primecell-periphid = <0x00041010>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; kmi0: kmi@18000000 { compatible = "arm,pl050", "arm,primecell"; arm,primecell-periphid = <0x00041050>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; kmi1: kmi@19000000 { compatible = "arm,pl050", "arm,primecell"; arm,primecell-periphid = <0x00041050>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; }; }; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index a21c17de9a5e..d43f15b4f79a 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -13,25 +13,107 @@ bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; }; + /* + * The Integrator/CP overall clocking architecture can be found in + * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which + * appear to illustrate the layout used in most configurations. + */ + + /* The codec chrystal operates at 24.576 MHz */ + xtal_codec: xtal24.576@24.576M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + /* The chrystal is divided by 2 by the codec for the AACI bit clock */ + aaci_bitclk: aaci_bitclk@12.288M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&xtal_codec>; + }; + + /* This is a 25MHz chrystal on the base board */ + xtal25mhz: xtal25mhz@25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + /* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */ + uartclk: uartclk@14.74M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <14745600>; + }; + + /* Actually sysclk I think */ + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + core-module@10000000 { + /* 24 MHz chrystal on the core module */ + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + /* + * External oscillator on the core module, usually used + * to drive video circuitry. Driven from the 24MHz clock. + */ + auxosc: cm_aux_osc@25M { + #clock-cells = <0>; + compatible = "arm,integrator-cm-auxosc"; + clocks = <&xtal24mhz>; + }; + + /* The KMI clock is the 24 MHz oscillator divided to 8MHz */ + kmiclk: kmiclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <3>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + /* The timer clock is the 24 MHz oscillator divided to 1MHz */ + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + }; + syscon { compatible = "arm,integrator-cp-syscon"; reg = <0xcb000000 0x100>; }; timer0: timer@13000000 { - /* TIMER0 runs @ 25MHz */ + /* TIMER0 runs directly on the 25MHz chrystal */ compatible = "arm,integrator-cp-timer"; - status = "disabled"; + clocks = <&xtal25mhz>; }; timer1: timer@13000100 { /* TIMER1 runs @ 1MHz */ compatible = "arm,integrator-cp-timer"; + clocks = <&timclk>; }; timer2: timer@13000200 { /* TIMER2 runs @ 1MHz */ compatible = "arm,integrator-cp-timer"; + clocks = <&timclk>; }; pic: pic@14000000 { @@ -74,22 +156,32 @@ */ rtc@15000000 { compatible = "arm,pl031", "arm,primecell"; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; uart@16000000 { compatible = "arm,pl011", "arm,primecell"; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; uart@17000000 { compatible = "arm,pl011", "arm,primecell"; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; kmi@18000000 { compatible = "arm,pl050", "arm,primecell"; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; kmi@19000000 { compatible = "arm,pl050", "arm,primecell"; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; /* @@ -100,18 +192,24 @@ reg = <0x1c000000 0x1000>; interrupts = <23 24>; max-frequency = <515633>; + clocks = <&uartclk>, <&pclk>; + clock-names = "mclk", "apb_pclk"; }; aaci@1d000000 { compatible = "arm,pl041", "arm,primecell"; reg = <0x1d000000 0x1000>; interrupts = <25>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; clcd@c0000000 { compatible = "arm,pl110", "arm,primecell"; reg = <0xC0000000 0x1000>; interrupts = <22>; + clocks = <&auxosc>, <&pclk>; + clock-names = "clcd", "apb_pclk"; }; }; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts index b9b55c95a566..c551e4af4d83 100644 --- a/arch/arm/boot/dts/omap3-gta04.dts +++ b/arch/arm/boot/dts/omap3-gta04.dts @@ -32,7 +32,7 @@ aux-button { label = "aux"; linux,code = <169>; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; gpio-key,wakeup; }; }; @@ -92,6 +92,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; + interrupt-parent = <&gpio4>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; }; /* leds */ @@ -141,8 +143,8 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; bus-width = <4>; + ti,non-removable; }; &mmc2 { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 39828ce464ee..9938b5dc1909 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -14,5 +14,5 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 6fc85f963530..0bf40c90faba 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -1,6 +1,6 @@ /* * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz> - * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi> + * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 (or later) as @@ -13,7 +13,7 @@ / { model = "Nokia N900"; - compatible = "nokia,omap3-n900", "ti,omap3"; + compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index b076a526b999..261c5589bfa3 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -14,5 +14,5 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts new file mode 100644 index 000000000000..966b5c9cd96a --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Tobi expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap36xx.dtsi" +#include "omap3-overo-tobi-common.dtsi" + +/ { + model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; +}; + diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 7e4ad2aec37a..4edc013a91c1 100644 --- a/arch/arm/boot/dts/omap3-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -13,9 +13,6 @@ #include "omap3-overo.dtsi" / { - model = "TI OMAP3 Gumstix Overo on Tobi"; - compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"; - leds { compatible = "gpio-leds"; heartbeat { diff --git a/arch/arm/boot/dts/omap3-overo-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi.dts new file mode 100644 index 000000000000..de5653e1b5ca --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-tobi.dts @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Tobi expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap34xx.dtsi" +#include "omap3-overo-tobi-common.dtsi" + +/ { + model = "OMAP35xx Gumstix Overo on Tobi"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"; +}; + diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index a461d2fd1fb0..597099907f8e 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -9,9 +9,6 @@ /* * The Gumstix Overo must be combined with an expansion board. */ -/dts-v1/; - -#include "omap34xx.dtsi" / { pwmleds { diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 52447c17537a..3d5faf85f51b 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1228,7 +1228,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>, + clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 0c1e8d871ed1..6cb9b68e2188 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -188,7 +188,6 @@ msp2: msp@80117000 { pinctrl-names = "default"; pinctrl-0 = <&msp2_default_mode>; - status = "okay"; }; msp3: msp@80125000 { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 040bb0eba152..10666ca8aee1 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -315,7 +315,7 @@ ranges; emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-emac"; + compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; clocks = <&ahb_gates 17>; @@ -323,7 +323,7 @@ }; mdio@01c0b080 { - compatible = "allwinner,sun4i-mdio"; + compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index ea16054857a4..64961595e8d6 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -278,7 +278,7 @@ ranges; emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-emac"; + compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; clocks = <&ahb_gates 17>; @@ -286,7 +286,7 @@ }; mdio@01c0b080 { - compatible = "allwinner,sun4i-mdio"; + compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 119f066f0d98..9ff09484847b 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -340,7 +340,7 @@ ranges; emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-emac"; + compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <0 55 4>; clocks = <&ahb_gates 17>; @@ -348,7 +348,7 @@ }; mdio@01c0b080 { - compatible = "allwinner,sun4i-mdio"; + compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 389e987ec281..44ec401ec366 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -57,6 +57,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; }; @@ -72,6 +74,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 480ecda3416b..48d2a7f4d0c0 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -94,6 +94,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; }; @@ -109,6 +111,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 9104224124ee..1e156d9d0506 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -28,7 +28,7 @@ compatible = "nvidia,cardhu", "nvidia,tegra30"; aliases { - rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc0 = "/i2c@7000d000/tps65911@2d"; rtc1 = "/rtc@7000e000"; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index ed8e7700b46d..19a84e933f4e 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -170,6 +170,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; }; @@ -185,6 +187,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; }; diff --git a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi deleted file mode 100644 index c843720bd3e5..000000000000 --- a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi +++ /dev/null @@ -1,58 +0,0 @@ - -/ { - testcase-data { - interrupts { - #address-cells = <1>; - #size-cells = <1>; - test_intc0: intc0 { - interrupt-controller; - #interrupt-cells = <1>; - }; - - test_intc1: intc1 { - interrupt-controller; - #interrupt-cells = <3>; - }; - - test_intc2: intc2 { - interrupt-controller; - #interrupt-cells = <2>; - }; - - test_intmap0: intmap0 { - #interrupt-cells = <1>; - #address-cells = <0>; - interrupt-map = <1 &test_intc0 9>, - <2 &test_intc1 10 11 12>, - <3 &test_intc2 13 14>, - <4 &test_intc2 15 16>; - }; - - test_intmap1: intmap1 { - #interrupt-cells = <2>; - interrupt-map = <0x5000 1 2 &test_intc0 15>; - }; - - interrupts0 { - interrupt-parent = <&test_intc0>; - interrupts = <1>, <2>, <3>, <4>; - }; - - interrupts1 { - interrupt-parent = <&test_intmap0>; - interrupts = <1>, <2>, <3>, <4>; - }; - - interrupts-extended0 { - reg = <0x5000 0x100>; - interrupts-extended = <&test_intc0 1>, - <&test_intc1 2 3 4>, - <&test_intc2 5 6>, - <&test_intmap0 1>, - <&test_intmap0 2>, - <&test_intmap0 3>, - <&test_intmap1 1 2>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/testcases/tests-phandle.dtsi b/arch/arm/boot/dts/testcases/tests-phandle.dtsi deleted file mode 100644 index 0007d3cd7dc2..000000000000 --- a/arch/arm/boot/dts/testcases/tests-phandle.dtsi +++ /dev/null @@ -1,39 +0,0 @@ - -/ { - testcase-data { - phandle-tests { - provider0: provider0 { - #phandle-cells = <0>; - }; - - provider1: provider1 { - #phandle-cells = <1>; - }; - - provider2: provider2 { - #phandle-cells = <2>; - }; - - provider3: provider3 { - #phandle-cells = <3>; - }; - - consumer-a { - phandle-list = <&provider1 1>, - <&provider2 2 0>, - <0>, - <&provider3 4 4 3>, - <&provider2 5 100>, - <&provider0>, - <&provider1 7>; - phandle-list-names = "first", "second", "third"; - - phandle-list-bad-phandle = <12345678 0 0>; - phandle-list-bad-args = <&provider2 1 0>, - <&provider3 0>; - empty-property; - unterminated-string = [40 41 42 43]; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/testcases/tests.dtsi b/arch/arm/boot/dts/testcases/tests.dtsi deleted file mode 100644 index 3f123ecc9dd7..000000000000 --- a/arch/arm/boot/dts/testcases/tests.dtsi +++ /dev/null @@ -1,2 +0,0 @@ -/include/ "tests-phandle.dtsi" -/include/ "tests-interrupts.dtsi" diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index f43907c40c93..65f657711323 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -1,4 +1,4 @@ -/include/ "versatile-ab.dts" +#include <versatile-ab.dts> / { model = "ARM Versatile PB"; @@ -47,4 +47,4 @@ }; }; -/include/ "testcases/tests.dtsi" +#include <testcases.dtsi> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 8b67b19392ec..602e12eedb01 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -123,29 +123,28 @@ } ; slcr: slcr@f8000000 { - compatible = "xlnx,zynq-slcr"; + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,zynq-slcr", "syscon"; reg = <0xF8000000 0x1000>; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - clkc: clkc { - #clock-cells = <1>; - compatible = "xlnx,ps7-clkc"; - ps-clk-frequency = <33333333>; - clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", - "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", - "dci", "lqspi", "smc", "pcap", "gem0", "gem1", - "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", - "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", - "dma", "usb0_aper", "usb1_aper", "gem0_aper", - "gem1_aper", "sdio0_aper", "sdio1_aper", - "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", - "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", - "gpio_aper", "lqspi_aper", "smc_aper", "swdt", - "dbg_trc", "dbg_apb"; - }; + ranges; + clkc: clkc@100 { + #clock-cells = <1>; + compatible = "xlnx,ps7-clkc"; + ps-clk-frequency = <33333333>; + fclk-enable = <0>; + clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", + "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", + "dci", "lqspi", "smc", "pcap", "gem0", "gem1", + "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", + "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", + "dma", "usb0_aper", "usb1_aper", "gem0_aper", + "gem1_aper", "sdio0_aper", "sdio1_aper", + "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", + "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", + "gpio_aper", "lqspi_aper", "smc_aper", "swdt", + "dbg_trc", "dbg_apb"; + reg = <0x100 0x100>; }; }; diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index 53c6a26b633d..fd6bff0c5b96 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -271,10 +271,14 @@ static void __init integrator_cp_of_init(struct device_node *np) void __iomem *base; int irq; const char *name = of_get_property(np, "compatible", NULL); + struct clk *clk; base = of_iomap(np, 0); if (WARN_ON(!base)) return; + clk = of_clk_get(np, 0); + if (WARN_ON(IS_ERR(clk))) + return; /* Ensure timer is disabled */ writel(0, base + TIMER_CTRL); @@ -283,13 +287,13 @@ static void __init integrator_cp_of_init(struct device_node *np) goto err; if (!init_count) - sp804_clocksource_init(base, name); + __sp804_clocksource_and_sched_clock_init(base, name, clk, 0); else { irq = irq_of_parse_and_map(np, 0); if (irq <= 0) goto err; - sp804_clockevents_init(base, irq, name); + __sp804_clockevents_init(base, irq, clk, name); } init_count++; diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 845bc745706b..ee6982976d66 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -29,6 +29,7 @@ CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y +CONFIG_SOC_DRA7XX=y CONFIG_SOC_AM43XX=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SOCFPGA=y diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index e9a49fe0284e..8b8b61685a34 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -212,6 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *, static inline void __flush_icache_all(void) { __flush_icache_preferred(); + dsb(); } /* diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 03243f7eeddf..85c60adc8b60 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -120,13 +120,16 @@ /* * 2nd stage PTE definitions for LPAE. */ -#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x5) << 2) /* MemAttr[3:0] */ -#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */ -#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */ -#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ -#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */ +#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x0) << 2) /* strongly ordered */ +#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* normal inner write-through */ +#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* normal inner write-back */ +#define L_PTE_S2_MT_DEV_SHARED (_AT(pteval_t, 0x1) << 2) /* device */ +#define L_PTE_S2_MT_MASK (_AT(pteval_t, 0xf) << 2) -#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */ +#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ +#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */ + +#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */ /* * Hyp-mode PL2 PTE definitions for LPAE. diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index ef3c6072aa45..ac4bfae26702 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -37,18 +37,9 @@ static inline void dsb_sev(void) { -#if __LINUX_ARM_ARCH__ >= 7 - __asm__ __volatile__ ( - "dsb ishst\n" - SEV - ); -#else - __asm__ __volatile__ ( - "mcr p15, 0, %0, c7, c10, 4\n" - SEV - : : "r" (0) - ); -#endif + + dsb(ishst); + __asm__(SEV); } /* diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S index f3a9cff6d5d4..8d8d922e5e44 100644 --- a/arch/arm/include/debug/samsung.S +++ b/arch/arm/include/debug/samsung.S @@ -9,7 +9,7 @@ * published by the Free Software Foundation. */ -#include <plat/regs-serial.h> +#include <linux/serial_s3c.h> /* The S5PV210/S5PC110 implementations are as belows. */ diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S index f9aa9740a73f..0b762fafa758 100644 --- a/arch/arm/include/debug/zynq.S +++ b/arch/arm/include/debug/zynq.S @@ -42,6 +42,9 @@ .endm .macro waituart,rd,rx +1001: ldr \rd, [\rx, #UART_SR_OFFSET] + tst \rd, #UART_SR_TXEMPTY + beq 1001b .endm .macro busyuart,rd,rx diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b0df9761de6d..1e8b030dbefd 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -731,7 +731,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc) kernel_data.end = virt_to_phys(_end - 1); for_each_memblock(memory, region) { - res = memblock_virt_alloc_low(sizeof(*res), 0); + res = memblock_virt_alloc(sizeof(*res), 0); res->name = "System RAM"; res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region)); res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1; diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index f18be40e5b21..025fd8215ca3 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -20,6 +20,7 @@ #include <clocksource/samsung_pwm.h> #include <linux/sched.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/of.h> #include <linux/of_fdt.h> #include <linux/of_irq.h> @@ -40,7 +41,6 @@ #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include "common.h" #include "regs-pmu.h" diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h deleted file mode 100644 index 5d7ce36be46f..000000000000 --- a/arch/arm/mach-exynos/include/mach/uncompress.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H __FILE__ - -#include <asm/mach-types.h> - -#include <mach/map.h> -#include <plat/uncompress.h> - -static unsigned int __raw_readl(unsigned int ptr) -{ - return *((volatile unsigned int *)ptr); -} - -static void arch_detect_cpu(void) -{ - u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID); - - /* - * product_id is bits 31:12 - * bits 23:20 describe the exynosX family - * bits 27:24 describe the exynosX family in exynos5420 - */ - chip_id >>= 20; - - if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50) - uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); - else - uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); - - /* - * For preventing FIFO overrun or infinite loop of UART console, - * fifo_max should be the minimum fifo size of all of the UART channels - */ - fifo_mask = S5PV210_UFSTAT_TXMASK; - fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT; -} -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 8fd24882f0b1..fe6570ebbdde 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -22,8 +22,6 @@ #include <linux/of_platform.h> #include <linux/sched.h> -#include <plat/devs.h> - #include "regs-pmu.h" /* diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index 8f4649b301b2..1abae5f6a418 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -8,7 +8,7 @@ config ARCH_HI3xxx select CLKSRC_OF select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU - select HAVE_ARM_TWD + select HAVE_ARM_TWD if SMP select HAVE_SMP select PINCTRL select PINCTRL_SINGLE diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index befcaf5d0574..ec419649320f 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -101,11 +101,9 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o -ifeq ($(CONFIG_PM),y) obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o # i.MX6SL reuses i.MX6Q code obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o -endif # i.MX5 based machines obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index af2e582d2b74..4d677f442539 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -482,6 +482,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) if (IS_ENABLED(CONFIG_PCI_IMX6)) clk_set_parent(clk[lvds1_sel], clk[sata_ref]); + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index 3781a1853998..4c86f3035205 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -266,6 +266,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) /* Audio-related clocks configuration */ clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]); + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 59c3b9b26bb4..baf439dc22d8 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -144,13 +144,11 @@ void imx6q_set_chicken_bit(void); void imx_cpu_die(unsigned int cpu); int imx_cpu_kill(unsigned int cpu); -#ifdef CONFIG_PM void imx6q_pm_init(void); void imx6q_pm_set_ccm_base(void __iomem *base); +#ifdef CONFIG_PM void imx5_pm_init(void); #else -static inline void imx6q_pm_init(void) {} -static inline void imx6q_pm_set_ccm_base(void __iomem *base) {} static inline void imx5_pm_init(void) {} #endif diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index 9d47adc078aa..7a9b98589db7 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -236,8 +236,6 @@ void __init imx6q_pm_init(void) regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT, IMX6Q_GPR1_GINT); - /* Set initial power mode */ - imx6q_set_lpm(WAIT_CLOCKED); suspend_set_ops(&imx6q_pm_ops); } diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index abeff25532ab..6e8b0e10b420 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -30,6 +30,9 @@ config ARCH_CINTEGRATOR config INTEGRATOR_IMPD1 tristate "Include support for Integrator/IM-PD1" depends on ARCH_INTEGRATOR_AP + select ARCH_REQUIRE_GPIOLIB + select ARM_VIC + select GPIO_PL061 if GPIOLIB help The IM-PD1 is an add-on logic module for the Integrator which allows ARM(R) Ltd PrimeCells to be developed and evaluated. diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 00ddf20ed91b..e3f3aca43efb 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -25,13 +25,11 @@ #include <linux/of.h> #include <linux/of_address.h> -#include <mach/hardware.h> -#include <mach/platform.h> - #include <asm/mach-types.h> #include <asm/mach/time.h> #include <asm/pgtable.h> +#include "hardware.h" #include "cm.h" #include "common.h" diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/hardware.h index 306d025d9730..857ca5f8b9a6 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/hardware.h @@ -1,4 +1,8 @@ /* + * This file contains the hardware definitions of the Integrator. + * + * Copyright (C) 1998-1999 ARM Limited. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -13,26 +17,28 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/************************************************************************** - * * Copyright © ARM Limited 1998. All rights reserved. - * ***********************************************************************/ -/* ************************************************************************ - * - * Integrator address map - * - * ***********************************************************************/ +#ifndef INTEGRATOR_HARDWARE_H +#define INTEGRATOR_HARDWARE_H -#ifndef __address_h -#define __address_h 1 +/* + * Where in virtual memory the IO devices (timers, system controllers + * and so on) + */ +#define IO_BASE 0xF0000000 // VA of IO +#define IO_SIZE 0x0B000000 // How much? +#define IO_START INTEGRATOR_HDR_BASE // PA of IO + +/* macro to get at IO space when running virtually */ +#ifdef CONFIG_MMU +#define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE) +#else +#define IO_ADDRESS(x) (x) +#endif -/* ======================================================================== - * Integrator definitions - * ======================================================================== - * ------------------------------------------------------------------------ - * Memory definitions - * ------------------------------------------------------------------------ +#define __io_address(n) ((void __iomem *)IO_ADDRESS(n)) + +/* * Integrator memory map - * */ #define INTEGRATOR_BOOT_ROM_LO 0x00000000 #define INTEGRATOR_BOOT_ROM_HI 0x20000000 @@ -40,13 +46,13 @@ #define INTEGRATOR_BOOT_ROM_SIZE SZ_512K /* - * New Core Modules have different amounts of SSRAM, the amount of SSRAM - * fitted can be found in HDR_STAT. + * New Core Modules have different amounts of SSRAM, the amount of SSRAM + * fitted can be found in HDR_STAT. * - * The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to - * the minimum amount of SSRAM fitted on any core module. + * The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to + * the minimum amount of SSRAM fitted on any core module. * - * New Core Modules also alias the SSRAM. + * New Core Modules also alias the SSRAM. * */ #define INTEGRATOR_SSRAM_BASE 0x00000000 @@ -61,7 +67,6 @@ /* * SDRAM is a SIMM therefore the size is not known. - * */ #define INTEGRATOR_SDRAM_BASE 0x00040000 @@ -81,10 +86,8 @@ #define INTEGRATOR_LOGIC_MODULE2_BASE 0xE0000000 #define INTEGRATOR_LOGIC_MODULE3_BASE 0xF0000000 -/* ------------------------------------------------------------------------ - * Integrator header card registers - * ------------------------------------------------------------------------ - * +/* + * Integrator header card registers */ #define INTEGRATOR_HDR_ID_OFFSET 0x00 #define INTEGRATOR_HDR_PROC_OFFSET 0x04 @@ -173,16 +176,12 @@ #define INTEGRATOR_HDR_SDRAM_SPD_OK (1 << 5) - -/* ------------------------------------------------------------------------ - * Integrator system registers - * ------------------------------------------------------------------------ - * +/* + * Integrator system registers */ /* * System Controller - * */ #define INTEGRATOR_SC_ID_OFFSET 0x00 #define INTEGRATOR_SC_OSC_OFFSET 0x04 @@ -223,7 +222,6 @@ /* * External Bus Interface - * */ #define INTEGRATOR_EBI_BASE 0x12000000 @@ -272,7 +270,6 @@ /* * LED's & Switches - * */ #define INTEGRATOR_DBG_ALPHA_OFFSET 0x00 #define INTEGRATOR_DBG_LEDS_OFFSET 0x04 @@ -292,32 +289,25 @@ #define INTEGRATOR_CP_SIC_BASE 0xCA000000 /* SIC */ #define INTEGRATOR_CP_CTL_BASE 0xCB000000 /* CP system control */ -/* ------------------------------------------------------------------------ - * KMI keyboard/mouse definitions - * ------------------------------------------------------------------------ - */ /* PS2 Keyboard interface */ #define KMI0_BASE INTEGRATOR_KBD_BASE /* PS2 Mouse interface */ #define KMI1_BASE INTEGRATOR_MOUSE_BASE -/* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */ - -/* ------------------------------------------------------------------------ - * Integrator Interrupt Controllers - * ------------------------------------------------------------------------ +/* + * Integrator Interrupt Controllers * - * Offsets from interrupt controller base * - * System Controller interrupt controller base is + * Offsets from interrupt controller base + * + * System Controller interrupt controller base is * * INTEGRATOR_IC_BASE + (header_number << 6) * - * Core Module interrupt controller base is + * Core Module interrupt controller base is * * INTEGRATOR_HDR_IC - * */ #define IRQ_STATUS 0 #define IRQ_RAW_STATUS 0x04 @@ -335,25 +325,8 @@ #define FIQ_ENABLE_CLEAR 0x2C -/* ------------------------------------------------------------------------ - * Interrupts - * ------------------------------------------------------------------------ - * - * - * Each Core Module has two interrupts controllers, one on the core module - * itself and one in the system controller on the motherboard. The - * READ_INT macro in target.s reads both interrupt controllers and returns - * a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller - * and bits 24 to 31 are from the core module. - * - * The following definitions relate to the bitmask returned by READ_INT. - * - */ - -/* ------------------------------------------------------------------------ - * LED's - * ------------------------------------------------------------------------ - * +/* + * LED's */ #define GREEN_LED 0x01 #define YELLOW_LED 0x02 @@ -371,7 +344,6 @@ * * Timer 0 runs at bus frequency */ - #define INTEGRATOR_TIMER0_BASE INTEGRATOR_CT_BASE #define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100) #define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200) @@ -379,4 +351,4 @@ #define INTEGRATOR_CSR_BASE 0x10000000 #define INTEGRATOR_CSR_SIZE 0x10000000 -#endif +#endif /* INTEGRATOR_HARDWARE_H */ diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 9f82f9dcbb98..0e870ea818c4 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -23,10 +23,11 @@ #include <linux/io.h> #include <linux/platform_data/clk-integrator.h> #include <linux/slab.h> +#include <linux/irqchip/arm-vic.h> -#include <mach/lm.h> -#include <mach/impd1.h> #include <asm/sizes.h> +#include "lm.h" +#include "impd1.h" static int module_id; @@ -35,6 +36,7 @@ MODULE_PARM_DESC(lmid, "logic module stack position"); struct impd1_module { void __iomem *base; + void __iomem *vic_base; }; void impd1_tweak_control(struct device *dev, u32 mask, u32 val) @@ -262,9 +264,6 @@ struct impd1_device { static struct impd1_device impd1_devs[] = { { - .offset = 0x03000000, - .id = 0x00041190, - }, { .offset = 0x00100000, .irq = { 1 }, .id = 0x00141011, @@ -304,46 +303,72 @@ static struct impd1_device impd1_devs[] = { } }; -static int impd1_probe(struct lm_device *dev) +/* + * Valid IRQs: 0 thru 9 and 11, 10 unused. + */ +#define IMPD1_VALID_IRQS 0x00000bffU + +static int __init impd1_probe(struct lm_device *dev) { struct impd1_module *impd1; - int i, ret; + int irq_base; + int i; if (dev->id != module_id) return -EINVAL; - if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers")) + if (!devm_request_mem_region(&dev->dev, dev->resource.start, + SZ_4K, "LM registers")) return -EBUSY; - impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL); - if (!impd1) { - ret = -ENOMEM; - goto release_lm; - } + impd1 = devm_kzalloc(&dev->dev, sizeof(struct impd1_module), + GFP_KERNEL); + if (!impd1) + return -ENOMEM; - impd1->base = ioremap(dev->resource.start, SZ_4K); - if (!impd1->base) { - ret = -ENOMEM; - goto free_impd1; - } + impd1->base = devm_ioremap(&dev->dev, dev->resource.start, SZ_4K); + if (!impd1->base) + return -ENOMEM; - lm_set_drvdata(dev, impd1); + integrator_impd1_clk_init(impd1->base, dev->id); - printk("IM-PD1 found at 0x%08lx\n", - (unsigned long)dev->resource.start); + if (!devm_request_mem_region(&dev->dev, + dev->resource.start + 0x03000000, + SZ_4K, "VIC")) + return -EBUSY; - integrator_impd1_clk_init(impd1->base, dev->id); + impd1->vic_base = devm_ioremap(&dev->dev, + dev->resource.start + 0x03000000, + SZ_4K); + if (!impd1->vic_base) + return -ENOMEM; + + irq_base = vic_init_cascaded(impd1->vic_base, dev->irq, + IMPD1_VALID_IRQS, 0); + + lm_set_drvdata(dev, impd1); + + dev_info(&dev->dev, "IM-PD1 found at 0x%08lx\n", + (unsigned long)dev->resource.start); for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) { struct impd1_device *idev = impd1_devs + i; struct amba_device *d; unsigned long pc_base; char devname[32]; + int irq1 = idev->irq[0]; + int irq2 = idev->irq[1]; + + /* Translate IRQs to IM-PD1 local numberspace */ + if (irq1) + irq1 += irq_base; + if (irq2) + irq2 += irq_base; pc_base = dev->resource.start + idev->offset; snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12); d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K, - dev->irq, dev->irq, + irq1, irq2, idev->platform_data, idev->id, &dev->resource); if (IS_ERR(d)) { @@ -353,14 +378,6 @@ static int impd1_probe(struct lm_device *dev) } return 0; - - free_impd1: - if (impd1 && impd1->base) - iounmap(impd1->base); - kfree(impd1); - release_lm: - release_mem_region(dev->resource.start, SZ_4K); - return ret; } static int impd1_remove_one(struct device *dev, void *data) @@ -371,16 +388,10 @@ static int impd1_remove_one(struct device *dev, void *data) static void impd1_remove(struct lm_device *dev) { - struct impd1_module *impd1 = lm_get_drvdata(dev); - device_for_each_child(&dev->dev, NULL, impd1_remove_one); integrator_impd1_clk_exit(dev->id); lm_set_drvdata(dev, NULL); - - iounmap(impd1->base); - kfree(impd1); - release_mem_region(dev->resource.start, SZ_4K); } static struct lm_driver impd1_driver = { diff --git a/arch/arm/mach-integrator/include/mach/impd1.h b/arch/arm/mach-integrator/impd1.h index d75de4b14237..76de4dc9bee4 100644 --- a/arch/arm/mach-integrator/include/mach/impd1.h +++ b/arch/arm/mach-integrator/impd1.h @@ -1,6 +1,3 @@ -#define IMPD1_OSC1 0x00 -#define IMPD1_OSC2 0x04 -#define IMPD1_LOCK 0x08 #define IMPD1_LEDS 0x0c #define IMPD1_INT 0x10 #define IMPD1_SW 0x14 @@ -15,4 +12,3 @@ struct device; void impd1_tweak_control(struct device *dev, u32 mask, u32 val); - diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h deleted file mode 100644 index 65fed7c0eb84..000000000000 --- a/arch/arm/mach-integrator/include/mach/hardware.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/hardware.h - * - * This file contains the hardware definitions of the Integrator. - * - * Copyright (C) 1999 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/sizes.h> - -/* - * Where in virtual memory the IO devices (timers, system controllers - * and so on) - */ -#define IO_BASE 0xF0000000 // VA of IO -#define IO_SIZE 0x0B000000 // How much? -#define IO_START INTEGRATOR_HDR_BASE // PA of IO - -/* macro to get at IO space when running virtually */ -#ifdef CONFIG_MMU -#define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE) -#else -#define IO_ADDRESS(x) (x) -#endif - -#define __io_address(n) ((void __iomem *)IO_ADDRESS(n)) - -#endif - diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 17c0fe627435..9d5d6386aaee 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -42,24 +42,23 @@ #include <linux/sys_soc.h> #include <linux/termios.h> #include <linux/sched_clock.h> +#include <linux/clk-provider.h> -#include <mach/hardware.h> -#include <mach/platform.h> #include <asm/hardware/arm_timer.h> #include <asm/setup.h> #include <asm/param.h> /* HZ */ #include <asm/mach-types.h> -#include <mach/lm.h> - #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include "hardware.h" #include "cm.h" #include "common.h" #include "pci_v3.h" +#include "lm.h" /* Base address to the AP system controller */ void __iomem *ap_syscon_base; @@ -402,10 +401,7 @@ static void __init ap_of_timer_init(void) struct clk *clk; unsigned long rate; - clk = clk_get_sys("ap_timer", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - rate = clk_get_rate(clk); + of_clk_init(NULL); err = of_property_read_string(of_aliases, "arm,timer-primary", &path); @@ -415,6 +411,12 @@ static void __init ap_of_timer_init(void) base = of_iomap(node, 0); if (WARN_ON(!base)) return; + + clk = of_clk_get(node, 0); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + rate = clk_get_rate(clk); + writel(0, base + TIMER_CTRL); integrator_clocksource_init(rate, base); @@ -427,6 +429,12 @@ static void __init ap_of_timer_init(void) if (WARN_ON(!base)) return; irq = irq_of_parse_and_map(node, 0); + + clk = of_clk_get(node, 0); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + rate = clk_get_rate(clk); + writel(0, base + TIMER_CTRL); integrator_clockevent_init(rate, base, irq); } @@ -440,7 +448,6 @@ static void __init ap_init_irq_of(void) { cm_init(); of_irq_init(fpga_irq_of_match); - integrator_clk_init(false); } /* For the Device Tree, add in the UART callbacks as AUXDATA */ diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index a3ef961e4a93..a938242b0c95 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -23,31 +23,22 @@ #include <linux/irqchip/versatile-fpga.h> #include <linux/gfp.h> #include <linux/mtd/physmap.h> -#include <linux/platform_data/clk-integrator.h> #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/sys_soc.h> +#include <linux/sched_clock.h> -#include <mach/hardware.h> -#include <mach/platform.h> #include <asm/setup.h> #include <asm/mach-types.h> -#include <asm/hardware/arm_timer.h> -#include <asm/hardware/icst.h> - -#include <mach/lm.h> - #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <asm/hardware/timer-sp.h> - #include <plat/clcd.h> -#include <plat/sched_clock.h> +#include "hardware.h" #include "cm.h" #include "common.h" @@ -234,11 +225,14 @@ static struct clcd_board clcd_data = { #define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28) +static u64 notrace intcp_read_sched_clock(void) +{ + return readl(REFCOUNTER); +} + static void __init intcp_init_early(void) { -#ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK - versatile_sched_clock_init(REFCOUNTER, 24000000); -#endif + sched_clock_register(intcp_read_sched_clock, 32, 24000000); } static const struct of_device_id fpga_irq_of_match[] __initconst = { @@ -250,7 +244,6 @@ static void __init intcp_init_irq_of(void) { cm_init(); of_irq_init(fpga_irq_of_match); - integrator_clk_init(true); } /* diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c index cb6ac58f5e07..f1dcb57a59e2 100644 --- a/arch/arm/mach-integrator/leds.c +++ b/arch/arm/mach-integrator/leds.c @@ -11,9 +11,7 @@ #include <linux/slab.h> #include <linux/leds.h> -#include <mach/hardware.h> -#include <mach/platform.h> - +#include "hardware.h" #include "cm.h" #if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c index f52c7af31eaa..3f9e9f043168 100644 --- a/arch/arm/mach-integrator/lm.c +++ b/arch/arm/mach-integrator/lm.c @@ -12,7 +12,7 @@ #include <linux/device.h> #include <linux/slab.h> -#include <mach/lm.h> +#include "lm.h" #define to_lm_device(d) container_of(d, struct lm_device, dev) #define to_lm_driver(d) container_of(d, struct lm_driver, drv) diff --git a/arch/arm/mach-integrator/include/mach/lm.h b/arch/arm/mach-integrator/lm.h index 28186b6f2c09..28186b6f2c09 100644 --- a/arch/arm/mach-integrator/include/mach/lm.h +++ b/arch/arm/mach-integrator/lm.h diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index c5e01b24d9fb..05e1f73a1e8d 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -34,15 +34,13 @@ #include <linux/of_pci.h> #include <video/vga.h> -#include <mach/hardware.h> -#include <mach/platform.h> - #include <asm/mach/map.h> #include <asm/signal.h> #include <asm/mach/pci.h> #include <asm/irq_regs.h> #include "pci_v3.h" +#include "hardware.h" /* * Where in the memory map does PCI live? diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index ba470d64493b..3795ae28a613 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -2,7 +2,6 @@ config ARCH_MOXART bool "MOXA ART SoC" if ARCH_MULTI_V4T select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE - select DMA_OF select USE_OF select CLKSRC_OF select CLKSRC_MMIO diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 91449c5cb70f..85089d821982 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -156,6 +156,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = { .register_dev = 1, .hmc_mode = 16, .pins[0] = 6, + .extcon = "tahvo-usb", }; #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 653b489479e0..0af7ca02314d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -50,11 +50,12 @@ config SOC_OMAP5 bool "TI OMAP5" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC select CPU_V7 select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_ARM_TWD if SMP select HAVE_SMP select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 if SMP @@ -63,6 +64,7 @@ config SOC_AM33XX bool "TI AM33XX" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select CPU_V7 select MULTI_IRQ_HANDLER @@ -72,6 +74,7 @@ config SOC_AM43XX depends on ARCH_MULTI_V7 select CPU_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select MULTI_IRQ_HANDLER select ARM_GIC select MACH_OMAP_GENERIC @@ -80,6 +83,7 @@ config SOC_DRA7XX bool "TI DRA7XX" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC select CPU_V7 @@ -268,9 +272,6 @@ config MACH_OMAP_3430SDP default y select OMAP_PACKAGE_CBB -config MACH_NOKIA_N800 - bool - config MACH_NOKIA_N810 bool @@ -281,7 +282,6 @@ config MACH_NOKIA_N8X0 bool "Nokia N800/N810" depends on SOC_OMAP2420 default y - select MACH_NOKIA_N800 select MACH_NOKIA_N810 select MACH_NOKIA_N810_WIMAX select OMAP_PACKAGE_ZAC diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index d24926e6340f..ab43755364f5 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1339,7 +1339,7 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np, of_property_read_bool(np, "gpmc,time-para-granularity"); } -#ifdef CONFIG_MTD_NAND +#if IS_ENABLED(CONFIG_MTD_NAND) static const char * const nand_xfer_types[] = { [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled", @@ -1429,7 +1429,7 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, } #endif -#ifdef CONFIG_MTD_ONENAND +#if IS_ENABLED(CONFIG_MTD_ONENAND) static int gpmc_probe_onenand_child(struct platform_device *pdev, struct device_node *child) { diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index d408b15b4fbf..af432b191255 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -179,15 +179,6 @@ static struct map_desc omap34xx_io_desc[] __initdata = { .length = L4_EMU_34XX_SIZE, .type = MT_DEVICE }, -#if defined(CONFIG_DEBUG_LL) && \ - (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3)) - { - .virtual = ZOOM_UART_VIRT, - .pfn = __phys_to_pfn(ZOOM_UART_BASE), - .length = SZ_1M, - .type = MT_DEVICE - }, -#endif }; #endif diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c index c9f309ae88c5..8b90c4f2d430 100644 --- a/arch/arm/mach-pxa/am300epd.c +++ b/arch/arm/mach-pxa/am300epd.c @@ -30,6 +30,7 @@ #include <mach/gumstix.h> #include <mach/mfp-pxa25x.h> +#include <mach/irqs.h> #include <linux/platform_data/video-pxafb.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 954641e6c8b1..1b0825911e62 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -14,6 +14,8 @@ #ifndef ASM_ARCH_BALLOON3_H #define ASM_ARCH_BALLOON3_H +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ + enum balloon3_features { BALLOON3_FEATURE_OHCI, BALLOON3_FEATURE_MMC, diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index f3c3493b468d..c030d955bbd7 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -13,6 +13,7 @@ #ifndef __ASM_ARCH_CORGI_H #define __ASM_ARCH_CORGI_H 1 +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ /* * Corgi (Non Standard) GPIO Definitions diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h index 2628e7b72116..00cfbbbf73f7 100644 --- a/arch/arm/mach-pxa/include/mach/csb726.h +++ b/arch/arm/mach-pxa/include/mach/csb726.h @@ -11,6 +11,8 @@ #ifndef CSB726_H #define CSB726_H +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + #define CSB726_GPIO_IRQ_LAN 52 #define CSB726_GPIO_IRQ_SM501 53 #define CSB726_GPIO_MMC_DETECT 100 diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h index dba14b6503ad..f7df27bbb42e 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* BTRESET - Reset line to Bluetooth module, active low signal. */ #define GPIO_GUMSTIX_BTRESET 7 diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h index 22a96f87232b..7e63f4680271 100644 --- a/arch/arm/mach-pxa/include/mach/idp.h +++ b/arch/arm/mach-pxa/include/mach/idp.h @@ -23,6 +23,7 @@ * IDP hardware. */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ #define IDP_FLASH_PHYS (PXA_CS0_PHYS) #define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS) diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index 2c4471336570..b184f296023b 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -13,6 +13,8 @@ #ifndef _INCLUDE_PALMLD_H_ #define _INCLUDE_PALMLD_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /** HERE ARE GPIOs **/ /* GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 0bd4f036c72f..e342c5921405 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -15,6 +15,8 @@ #ifndef _INCLUDE_PALMT5_H_ #define _INCLUDE_PALMT5_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /** HERE ARE GPIOs **/ /* GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h index c383a21680b6..81c727b3cfd2 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/include/mach/palmtc.h @@ -16,6 +16,8 @@ #ifndef _INCLUDE_PALMTC_H_ #define _INCLUDE_PALMTC_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /** HERE ARE GPIOs **/ /* GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index f2e530380253..92bc1f05300d 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -16,6 +16,8 @@ #ifndef _INCLUDE_PALMTX_H_ #define _INCLUDE_PALMTX_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /** HERE ARE GPIOs **/ /* GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h index 6bf28de228bd..86ebd7b6c960 100644 --- a/arch/arm/mach-pxa/include/mach/pcm027.h +++ b/arch/arm/mach-pxa/include/mach/pcm027.h @@ -23,6 +23,8 @@ * Definitions of CPU card resources only */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /* phyCORE-PXA270 (PCM027) Interrupts */ #define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) #define PCM027_BTDET_IRQ PCM027_IRQ(0) diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h index 0260aaa2fc17..7e544c14967e 100644 --- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h +++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h @@ -20,6 +20,7 @@ */ #include <mach/pcm027.h> +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* * definitions relevant only when the PCM-990 diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h index f32ff75dcca8..b56b19351a03 100644 --- a/arch/arm/mach-pxa/include/mach/poodle.h +++ b/arch/arm/mach-pxa/include/mach/poodle.h @@ -15,6 +15,8 @@ #ifndef __ASM_ARCH_POODLE_H #define __ASM_ARCH_POODLE_H 1 +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /* * GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index 0bfe6507c95d..25c9f62e46aa 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -15,8 +15,8 @@ #define __ASM_ARCH_SPITZ_H 1 #endif +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */ #include <linux/fb.h> -#include <linux/gpio.h> /* Spitz/Akita GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index 2bb0e862598c..0497d95cef25 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -13,6 +13,8 @@ #ifndef _ASM_ARCH_TOSA_H_ #define _ASM_ARCH_TOSA_H_ 1 +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ + /* TOSA Chip selects */ #define TOSA_LCDC_PHYS PXA_CS4_PHYS /* Internel Scoop */ diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h index d2ca01053f69..ae3ca013afab 100644 --- a/arch/arm/mach-pxa/include/mach/trizeps4.h +++ b/arch/arm/mach-pxa/include/mach/trizeps4.h @@ -10,6 +10,8 @@ #ifndef _TRIPEPS4_H_ #define _TRIPEPS4_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /* physical memory regions */ #define TRIZEPS4_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ #define TRIZEPS4_DISK_PHYS (PXA_CS1_PHYS) /* Disk On Chip region */ diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index f70583fee59f..29997bde277d 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -38,6 +38,7 @@ #include <linux/mtd/physmap.h> #include <linux/usb/gpio_vbus.h> #include <linux/reboot.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/max1586.h> #include <linux/slab.h> #include <linux/i2c/pxa-i2c.h> @@ -714,6 +715,10 @@ static struct gpio global_gpios[] = { { GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" }, }; +static struct regulator_consumer_supply fixed_5v0_consumers[] = { + REGULATOR_SUPPLY("power", "pwm-backlight"), +}; + static void __init mioa701_machine_init(void) { int rc; @@ -753,6 +758,10 @@ static void __init mioa701_machine_init(void) pxa_set_i2c_info(&i2c_pdata); pxa27x_set_i2c_power_info(NULL); pxa_set_camera_info(&mioa701_pxacamera_platform_data); + + regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers, + ARRAY_SIZE(fixed_5v0_consumers), + 5000000); } static void mioa701_machine_exit(void) diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index d876431d64c0..bb1fa6032179 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -521,7 +521,6 @@ config MACH_ANUBIS select HAVE_PATA_PLATFORM select S3C2440_XTAL_12000000 select S3C24XX_DCLK - select S3C24XX_GPIO_EXTRA64 select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help @@ -562,7 +561,6 @@ config MACH_OSIRIS select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 select S3C24XX_DCLK - select S3C24XX_GPIO_EXTRA128 select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND select S3C_DEV_USB_HOST diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c index d39d3c787580..d1afcf9252d1 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c @@ -30,13 +30,12 @@ #include <linux/mutex.h> #include <linux/delay.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/map.h> #include <mach/hardware.h> - -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c index 11b3b28457bb..192a5b2550b0 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c @@ -31,13 +31,12 @@ #include <linux/mutex.h> #include <linux/delay.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/map.h> #include <mach/hardware.h> - -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index aaf006d1d6dc..5527226fd61f 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -34,6 +34,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <mach/hardware.h> #include <linux/atomic.h> @@ -43,7 +44,6 @@ #include <plat/clock.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> /* S3C2440 extended clock support */ diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 4adaa4b43ffe..64b6eda380a4 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -27,6 +27,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <clocksource/samsung_pwm.h> #include <linux/platform_device.h> #include <linux/delay.h> @@ -44,7 +45,6 @@ #include <asm/mach/map.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> #include <mach/dma.h> #include <plat/cpu.h> @@ -240,7 +240,6 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) } else { samsung_cpu_id = s3c24xx_read_idcode_v4(); } - s3c24xx_init_cpu(); s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c index 30aa53ff07a6..09aa12da1789 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2410.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <mach/map.h> #include <mach/dma.h> @@ -23,7 +24,6 @@ #include <plat/cpu.h> #include <plat/dma-s3c24xx.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c index b7e094671522..0c0106d1a4d1 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2412.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <mach/dma.h> @@ -23,7 +24,6 @@ #include <plat/dma-s3c24xx.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c index cd25de28804c..2f8e8a3017df 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2440.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <mach/map.h> #include <mach/dma.h> @@ -23,7 +24,6 @@ #include <plat/dma-s3c24xx.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c index 95b9f759fe97..f4096ec0700a 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2443.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <mach/dma.h> @@ -23,7 +24,6 @@ #include <plat/dma-s3c24xx.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index 2558952e3147..2f39737544c0 100644 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include <mach/map.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> +#include <linux/serial_s3c.h> #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h index 7b542f7b7938..4d5f5768f700 100644 --- a/arch/arm/plat-samsung/include/plat/rtc-core.h +++ b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h - * +/* * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> * * Samsung RTC Controller core functions @@ -9,19 +8,19 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_RTC_CORE_H -#define __ASM_PLAT_RTC_CORE_H __FILE__ +#ifndef __RTC_CORE_H +#define __RTC_CORE_H __FILE__ /* These functions are only for use with the core support code, such as * the cpu specific initialisation code */ +extern struct platform_device s3c_device_rtc; + /* re-define device name depending on support. */ static inline void s3c_rtc_setname(char *name) { -#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX) s3c_device_rtc.name = name; -#endif } -#endif /* __ASM_PLAT_RTC_CORE_H */ +#endif /* __RTC_CORE_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/tick.h b/arch/arm/mach-s3c24xx/include/mach/tick.h deleted file mode 100644 index 544da41979db..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/tick.h +++ /dev/null @@ -1,15 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/include/mach/tick.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C2410 - timer tick support - */ - -#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0)) - -static inline int s3c24xx_ostimer_pending(void) -{ - return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4; -} diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 284ea1f44205..8ac9554aa996 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -37,6 +37,7 @@ #include <linux/platform_device.h> #include <linux/proc_fs.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/arch.h> @@ -49,7 +50,6 @@ #include <asm/mach-types.h> #include <mach/fb.h> -#include <plat/regs-serial.h> #include <mach/regs-lcd.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 2a16f8fb3584..81a270af2336 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/gpio.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/i2c.h> @@ -32,7 +33,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index 6beab674c147..d8f6bb1096cb 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -21,6 +21,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/dm9000.h> #include <linux/platform_device.h> @@ -33,7 +34,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index 981ba1eb9fdc..e371ff53a408 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/dm9000.h> #include <linux/ata_platform.h> @@ -55,7 +56,6 @@ #include <plat/cpu-freq.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "bast.h" diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index d9170e9f8ccd..8e0581317f17 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -35,6 +35,7 @@ #include <linux/workqueue.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/input.h> #include <linux/io.h> #include <linux/i2c.h> @@ -81,7 +82,6 @@ #include <plat/devs.h> #include <plat/gpio-cfg.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index de0832181d8c..e453acd92cbf 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> @@ -62,7 +63,6 @@ #include <plat/gpio-cfg.h> #include <plat/pll.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 67cb8e948b7e..5faa7239e7d6 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/i2c.h> @@ -31,7 +32,6 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <plat/regs-serial.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h> diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 1f1559713d8b..9e57fd9f4f3b 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -23,6 +23,7 @@ #include <linux/input.h> #include <linux/io.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/dm9000.h> #include <linux/platform_data/at24.h> #include <linux/platform_device.h> @@ -37,7 +38,6 @@ #include <mach/fb.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <linux/platform_data/leds-s3c24xx.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 997684f17930..4cccaad34847 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -24,6 +24,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/timer.h> #include <linux/io.h> #include <linux/mmc/host.h> @@ -43,7 +44,6 @@ #include <asm/mach/map.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/regs-serial.h> #include <plat/clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 575d28c9e6c6..3066851f584d 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -21,6 +21,7 @@ #include <linux/gpio.h> #include <linux/string.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -38,7 +39,6 @@ //#include <asm/debug-ll.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index f84f2a4c0c6d..a4ae4bb3666d 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -18,6 +18,7 @@ #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/clk.h> #include <linux/i2c.h> #include <linux/io.h> @@ -44,7 +45,6 @@ #include <plat/cpu-freq.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 7e16b0740ec1..bdb3faac2d9b 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -15,6 +15,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -32,7 +33,6 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index b534b76812e3..8c12787a8fd3 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -31,6 +31,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> #include <linux/io.h> @@ -49,7 +50,6 @@ #include <linux/platform_data/leds-s3c24xx.h> #include <mach/regs-lcd.h> -#include <plat/regs-serial.h> #include <mach/fb.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/usb-s3c2410_udc.h> diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 0a5456cda1bc..afb784e934c8 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -21,6 +21,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/device.h> @@ -57,7 +58,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index b36edce8b2b8..e6535ce1bc5c 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -23,6 +23,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/serial.h> #include <linux/io.h> #include <linux/mtd/mtd.h> @@ -49,7 +50,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index f50454a34f72..70f0900d4bca 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -19,13 +19,13 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <asm/mach/arch.h> #include <mach/map.h> #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index a773789e4f38..f32924ee0e9f 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -35,6 +35,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -46,7 +47,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index f5bc721217e3..233fe52d2015 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/gpio.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -33,7 +34,6 @@ #include <asm/mach-types.h> //#include <asm/debug-ll.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index 12023cae4378..b3b54d8e1410 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -18,6 +18,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mtd/partitions.h> @@ -34,7 +35,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/regs-s3c2443-clock.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index de2e5d39a847..d071dcfea548 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -20,6 +20,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -31,7 +32,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index d9933fcc6cc8..06c4d77de3a5 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -20,6 +20,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -31,7 +32,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 7fad8f055cab..4108b2f0cede 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -33,6 +33,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/arch.h> @@ -44,7 +45,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 755df489a45f..1cc5b1bd51cd 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -25,6 +25,7 @@ #include <linux/tty.h> #include <linux/serial_8250.h> #include <linux/serial_reg.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/arch.h> @@ -45,7 +46,6 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "bast.h" diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index f7ec9c550787..40868c0e0a68 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -16,6 +16,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mtd/mtd.h> @@ -32,7 +33,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index 052ca23393a7..68ea5b7e5dc7 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -33,9 +33,9 @@ #include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> #include <mach/regs-irq.h> diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index ffb92cbca08c..04b58cb49888 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -21,6 +21,7 @@ #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/reboot.h> #include <linux/io.h> @@ -37,7 +38,6 @@ #include <plat/cpu-freq.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <plat/cpu.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 0251650cbf80..657cbaca80ac 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -20,6 +20,7 @@ #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/reboot.h> @@ -43,7 +44,6 @@ #include <plat/nand-core.h> #include <plat/pll.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/regs-spi.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index 8e01b4f2df35..9fe260ae11e1 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -48,6 +48,7 @@ #include <asm/system_misc.h> #include <mach/regs-s3c2443-clock.h> +#include <mach/rtc-core.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -61,7 +62,6 @@ #include <plat/fb-core.h> #include <plat/nand-core.h> #include <plat/adc-core.h> -#include <plat/rtc-core.h> #include <plat/spi-core.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index 886c2147062b..c7a804d0348e 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -34,6 +34,7 @@ #include <asm/system_misc.h> #include <mach/regs-s3c2443-clock.h> +#include <mach/rtc-core.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -43,7 +44,6 @@ #include <plat/fb-core.h> #include <plat/nand-core.h> #include <plat/adc-core.h> -#include <plat/rtc-core.h> #include <plat/spi-core.h> static struct map_desc s3c2443_iodesc[] __initdata = { diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index 911b555029fc..fe30ebb234d2 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -17,6 +17,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/reboot.h> #include <linux/device.h> @@ -35,7 +36,6 @@ #include <plat/cpu-freq.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/clock.h> diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S index dd47c8fa07fa..c9b91223697c 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S @@ -25,13 +25,13 @@ */ #include <linux/linkage.h> +#include <linux/serial_s3c.h> #include <asm/assembler.h> #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include "regs-mem.h" diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S index 7f378b662da6..d833d616bd2e 100644 --- a/arch/arm/mach-s3c24xx/sleep.S +++ b/arch/arm/mach-s3c24xx/sleep.S @@ -25,13 +25,13 @@ */ #include <linux/linkage.h> +#include <linux/serial_s3c.h> #include <asm/assembler.h> #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not * reset the UART configuration, only enable if you really need this! diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 76ab595d849b..5c45aae675b6 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -25,6 +25,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/reboot.h> #include <linux/io.h> @@ -50,7 +51,6 @@ #include <plat/irq-uart.h> #include <plat/pwm-core.h> #include <plat/regs-irqtype.h> -#include <plat/regs-serial.h> #include <plat/watchdog-reset.h> #include "common.h" diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index dd9ccca5de1f..c9b95325b672 100644 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -12,8 +12,8 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <mach/map.h> -#include <plat/regs-serial.h> /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 diff --git a/arch/arm/mach-s3c64xx/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h deleted file mode 100644 index db9c1b1d56a4..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/tick.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/tick.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - Timer tick support definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -#include <linux/irqchip/arm-vic.h> - -/* note, the timer interrutps turn up in 2 places, the vic and then - * the timer block. We take the VIC as the base at the moment. - */ -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0)); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_6400_TICK_H */ diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index 1649c0d1c1b8..a61247bb6e7a 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -20,13 +20,13 @@ #include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/of.h> #include <mach/map.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/cpu.h> #include <plat/pm.h> diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index ddeb0e51a962..55eb6a69655b 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -20,6 +20,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> @@ -41,7 +42,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 3df3c372ee1f..4b0199fff9f5 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/fb.h> #include <linux/io.h> @@ -51,7 +52,6 @@ #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> -#include <plat/regs-serial.h> #include <plat/fb.h> #include <plat/sdhci.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 0431016925b9..72cee08c8bf5 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> @@ -33,7 +34,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <mach/gpio-samsung.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 8d553a418e1c..9cbc07602ef3 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -22,6 +22,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/types.h> #include <asm/mach-types.h> @@ -38,7 +39,6 @@ #include <plat/fb.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/mmc-sdhci-s3c.h> -#include <plat/regs-serial.h> #include <plat/sdhci.h> #include <linux/platform_data/touchscreen-s3c2410.h> diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 2067b0bf55b4..67f06a9ae656 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -16,6 +16,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> @@ -36,7 +37,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 5152026f0e19..fbad2af1ef16 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -23,6 +23,7 @@ #include <linux/mtd/partitions.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/types.h> #include <asm/mach-types.h> @@ -38,7 +39,6 @@ #include <plat/devs.h> #include <plat/fb.h> #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/regs-serial.h> #include <linux/platform_data/touchscreen-s3c2410.h> #include <video/platform_lcd.h> diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 6e72bd5c1d0c..78dd6f73c072 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/pwm_backlight.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/spi/spi_gpio.h> #include <linux/usb/gpio_vbus.h> #include <linux/platform_data/s3c-hsotg.h> @@ -33,7 +34,6 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <linux/platform_data/hwmon-s3c.h> -#include <plat/regs-serial.h> #include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/sdhci.h> #include <linux/platform_data/touchscreen-s3c2410.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index 150f55fb9e33..c85d1cbe769f 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -16,6 +16,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/io.h> @@ -29,8 +30,6 @@ #include <mach/hardware.h> #include <mach/map.h> -#include <plat/regs-serial.h> - #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 43261d24a0a5..c6a8b2ab0240 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/input.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> @@ -55,7 +56,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> #include <linux/platform_data/ata-samsung_cf.h> diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 3db0c98222f7..8c42807bf579 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/of.h> @@ -34,7 +35,6 @@ #include <asm/irq.h> #include <plat/cpu-freq.h> -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 72b2278953a8..5be3f09bac92 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/of.h> @@ -35,7 +36,6 @@ #include <asm/irq.h> #include <plat/cpu-freq.h> -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 42e14f2e7ca7..eb2ad14947f4 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <clocksource/samsung_pwm.h> #include <linux/platform_device.h> #include <linux/sched.h> @@ -50,7 +51,6 @@ #include <plat/gpio-cfg.h> #include <plat/pwm-core.h> #include <plat/regs-irqtype.h> -#include <plat/regs-serial.h> #include <plat/watchdog-reset.h> #include "common.h" diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S index 5e2916fb19a9..8759e7882bcb 100644 --- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S @@ -10,11 +10,10 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <plat/map-base.h> #include <plat/map-s5p.h> -#include <plat/regs-serial.h> - .macro addruart, rp, rv, tmp mov \rp, #0xE0000000 orr \rp, \rp, #0x00100000 diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c index 3e6f2456ee9d..1c83d2899625 100644 --- a/arch/arm/mach-s5p64x0/irq-pm.c +++ b/arch/arm/mach-s5p64x0/irq-pm.c @@ -14,9 +14,9 @@ #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> -#include <plat/regs-serial.h> #include <plat/pm.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 9efdcc03df3b..6840e197cb2d 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/i2c.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index c3cacc067efe..fa1341c074ca 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/i2c.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index c5a8eeacf81c..6a41bf7dacf6 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <clocksource/samsung_pwm.h> #include <linux/platform_device.h> #include <linux/sched.h> @@ -49,7 +50,6 @@ #include <plat/onenand-core.h> #include <plat/pwm-core.h> #include <plat/spi-core.h> -#include <plat/regs-serial.h> #include <plat/watchdog-reset.h> #include "common.h" diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index 66cb7f16bf2a..22c23859e45e 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -13,8 +13,8 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <mach/map.h> -#include <plat/regs-serial.h> /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h deleted file mode 100644 index 0af8e41230ed..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/tick.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/tick.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S3C64XX - Timer tick support definitions - * - * Based on mach-s3c6400/include/mach/tick.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -#include <linux/irqchip/arm-vic.h> - -/* note, the timer interrutps turn up in 2 places, the vic and then - * the timer block. We take the VIC as the base at the moment. - */ -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 9e256b9fc930..668af3ac31f3 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -16,6 +16,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> @@ -37,7 +38,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 26027a29b8a1..7024dcd0e40a 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -24,6 +24,7 @@ #include <linux/sched.h> #include <linux/dma-mapping.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <asm/proc-fns.h> #include <asm/mach/arch.h> @@ -46,7 +47,6 @@ #include <plat/pwm-core.h> #include <plat/tv-core.h> #include <plat/spi-core.h> -#include <plat/regs-serial.h> #include "common.h" diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S index 80c21996c943..30b511a580aa 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -12,8 +12,8 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <mach/map.h> -#include <plat/regs-serial.h> /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index ad40ab0f5dbd..cc37edacda26 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/fb.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -32,7 +33,6 @@ #include <mach/regs-clock.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index e5cd9fbf19e9..b41a38a75844 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/fb.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -39,7 +40,6 @@ #include <mach/regs-clock.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 7c0ed07a78a3..448e1d2eeed6 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/i2c.h> #include <linux/device.h> @@ -23,7 +24,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/ata-samsung_cf.h> diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index f52cc15c2d85..2a6655fb63e7 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/device.h> #include <linux/dm9000.h> #include <linux/fb.h> @@ -32,7 +33,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <plat/regs-srom.h> #include <plat/gpio-cfg.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c index 579afe89842a..157805529f26 100644 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -22,7 +23,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/i2c-s3c2410.h> diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 338640631e08..05fa505df585 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -8,7 +8,7 @@ config ARCH_SHMOBILE_MULTI select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_ARM_TWD if SMP select HAVE_SMP select ARM_GIC select MIGHT_HAVE_CACHE_L2X0 diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 4ae0286b468d..f55b05a29b55 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -24,6 +24,7 @@ #include <linux/cpu_pm.h> #include <linux/suspend.h> #include <linux/err.h> +#include <linux/slab.h> #include <linux/clk/tegra.h> #include <asm/smp_plat.h> diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 303a285d80fd..6191603379e1 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -73,10 +73,20 @@ u32 tegra_uart_config[3] = { static void __init tegra_init_cache(void) { #ifdef CONFIG_CACHE_L2X0 + static const struct of_device_id pl310_ids[] __initconst = { + { .compatible = "arm,pl310-cache", }, + {} + }; + + struct device_node *np; int ret; void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; u32 aux_ctrl, cache_type; + np = of_find_matching_node(NULL, pl310_ids); + if (!np) + return; + cache_type = readl(p + L2X0_CACHE_TYPE); aux_ctrl = (cache_type & 0x700) << (17-8); aux_ctrl |= 0x7C400001; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index a335126ae18f..f2c89fb8fca9 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -108,7 +108,7 @@ void __init versatile_init_irq(void) np = of_find_matching_node_by_address(NULL, vic_of_match, VERSATILE_VIC_BASE); - __vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0, np); + __vic_init(VA_VIC_BASE, 0, IRQ_VIC_START, ~0, 0, np); writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR); diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 6b04260aa142..323e5053cb9f 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -14,5 +14,6 @@ config ARCH_ZYNQ select SPARSE_IRQ select CADENCE_TTC_TIMER select ARM_GLOBAL_TIMER + select MFD_SYSCON help Support for Xilinx Zynq ARM Cortex A9 Platform diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 1db2a5ca9ab8..dca60d5ba756 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -19,12 +19,14 @@ #include <linux/cpumask.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/clk/zynq.h> #include <linux/clocksource.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/of.h> +#include <linux/memblock.h> #include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> @@ -41,6 +43,18 @@ void __iomem *zynq_scu_base; +/** + * zynq_memory_init - Initialize special memory + * + * We need to stop things allocating the low memory as DMA can't work in + * the 1st 512K of memory. + */ +static void __init zynq_memory_init(void) +{ + if (!__pa(PAGE_OFFSET)) + memblock_reserve(__pa(PAGE_OFFSET), __pa(swapper_pg_dir)); +} + static struct platform_device zynq_cpuidle_device = { .name = "cpuidle-zynq", }; @@ -59,11 +73,16 @@ static void __init zynq_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register(&zynq_cpuidle_device); + + zynq_slcr_init(); } static void __init zynq_timer_init(void) { - zynq_slcr_init(); + zynq_early_slcr_init(); + + zynq_clock_init(); + of_clk_init(NULL); clocksource_of_init(); } @@ -117,5 +136,6 @@ DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") .init_machine = zynq_init_machine, .init_time = zynq_timer_init, .dt_compat = zynq_dt_match, + .reserve = zynq_memory_init, .restart = zynq_system_reset, MACHINE_END diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index c22c92cea8cb..b097844d3175 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -20,6 +20,7 @@ void zynq_secondary_startup(void); extern int zynq_slcr_init(void); +extern int zynq_early_slcr_init(void); extern void zynq_slcr_system_reset(void); extern void zynq_slcr_cpu_stop(int cpu); extern void zynq_slcr_cpu_start(int cpu); @@ -33,7 +34,6 @@ extern int zynq_cpun_start(u32 address, int cpu); extern struct smp_operations zynq_smp_ops __initdata; #endif -extern void __iomem *zynq_slcr_base; extern void __iomem *zynq_scu_base; /* Hotplug */ diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index 1836d5a34606..a37d49a6e657 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -15,7 +15,9 @@ */ #include <linux/io.h> +#include <linux/mfd/syscon.h> #include <linux/of_address.h> +#include <linux/regmap.h> #include <linux/clk/zynq.h> #include "common.h" @@ -29,7 +31,56 @@ #define SLCR_A9_CPU_CLKSTOP 0x10 #define SLCR_A9_CPU_RST 0x1 -void __iomem *zynq_slcr_base; +static void __iomem *zynq_slcr_base; +static struct regmap *zynq_slcr_regmap; + +/** + * zynq_slcr_write - Write to a register in SLCR block + * + * @val: Value to write to the register + * @offset: Register offset in SLCR block + * + * Return: a negative value on error, 0 on success + */ +static int zynq_slcr_write(u32 val, u32 offset) +{ + if (!zynq_slcr_regmap) { + writel(val, zynq_slcr_base + offset); + return 0; + } + + return regmap_write(zynq_slcr_regmap, offset, val); +} + +/** + * zynq_slcr_read - Read a register in SLCR block + * + * @val: Pointer to value to be read from SLCR + * @offset: Register offset in SLCR block + * + * Return: a negative value on error, 0 on success + */ +static int zynq_slcr_read(u32 *val, u32 offset) +{ + if (zynq_slcr_regmap) + return regmap_read(zynq_slcr_regmap, offset, val); + + *val = readl(zynq_slcr_base + offset); + + return 0; +} + +/** + * zynq_slcr_unlock - Unlock SLCR registers + * + * Return: a negative value on error, 0 on success + */ +static inline int zynq_slcr_unlock(void) +{ + zynq_slcr_write(SLCR_UNLOCK_MAGIC, SLCR_UNLOCK_OFFSET); + + return 0; +} /** * zynq_slcr_system_reset - Reset the entire system. @@ -43,16 +94,16 @@ void zynq_slcr_system_reset(void) * Note that this seems to require raw i/o * functions or there's a lockup? */ - writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET); + zynq_slcr_unlock(); /* * Clear 0x0F000000 bits of reboot status register to workaround * the FSBL not loading the bitstream after soft-reboot * This is a temporary solution until we know more. */ - reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET); - writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET); - writel(1, zynq_slcr_base + SLCR_PS_RST_CTRL_OFFSET); + zynq_slcr_read(&reboot, SLCR_REBOOT_STATUS_OFFSET); + zynq_slcr_write(reboot & 0xF0FFFFFF, SLCR_REBOOT_STATUS_OFFSET); + zynq_slcr_write(1, SLCR_PS_RST_CTRL_OFFSET); } /** @@ -61,11 +112,13 @@ void zynq_slcr_system_reset(void) */ void zynq_slcr_cpu_start(int cpu) { - u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET); + u32 reg; + + zynq_slcr_read(®, SLCR_A9_CPU_RST_CTRL_OFFSET); reg &= ~(SLCR_A9_CPU_RST << cpu); - writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET); + zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET); reg &= ~(SLCR_A9_CPU_CLKSTOP << cpu); - writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET); + zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET); } /** @@ -74,19 +127,40 @@ void zynq_slcr_cpu_start(int cpu) */ void zynq_slcr_cpu_stop(int cpu) { - u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET); + u32 reg; + + zynq_slcr_read(®, SLCR_A9_CPU_RST_CTRL_OFFSET); reg |= (SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu; - writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET); + zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET); } /** - * zynq_slcr_init - * Returns 0 on success, negative errno otherwise. + * zynq_slcr_init - Regular slcr driver init + * + * Return: 0 on success, negative errno otherwise. * * Called early during boot from platform code to remap SLCR area. */ int __init zynq_slcr_init(void) { + zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr"); + if (IS_ERR(zynq_slcr_regmap)) { + pr_err("%s: failed to find zynq-slcr\n", __func__); + return -ENODEV; + } + + return 0; +} + +/** + * zynq_early_slcr_init - Early slcr init function + * + * Return: 0 on success, negative errno otherwise. + * + * Called very early during boot from platform code to unlock SLCR. + */ +int __init zynq_early_slcr_init(void) +{ struct device_node *np; np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr"); @@ -101,13 +175,13 @@ int __init zynq_slcr_init(void) BUG(); } + np->data = (__force void *)zynq_slcr_base; + /* unlock the SLCR so that registers can be changed */ - writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET); + zynq_slcr_unlock(); pr_info("%s mapped to %p\n", np->name, zynq_slcr_base); - zynq_clock_init(zynq_slcr_base); - of_node_put(np); return 0; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 1a77450e728a..11b3914660d2 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1358,7 +1358,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); - if (gfp & GFP_ATOMIC) + if (!(gfp & __GFP_WAIT)) return __iommu_alloc_atomic(dev, size, handle); /* diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index d5a982d15a88..7ea641b7aa7d 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -38,6 +38,7 @@ static inline pmd_t *pmd_off_k(unsigned long virt) struct mem_type { pteval_t prot_pte; + pteval_t prot_pte_s2; pmdval_t prot_l1; pmdval_t prot_sect; unsigned int domain; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4f08c133cc25..a623cb3ad012 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -232,12 +232,16 @@ __setup("noalign", noalign_setup); #endif /* ifdef CONFIG_CPU_CP15 / else */ #define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN +#define PROT_PTE_S2_DEVICE PROT_PTE_DEVICE #define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE static struct mem_type mem_types[] = { [MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED | L_PTE_SHARED, + .prot_pte_s2 = s2_policy(PROT_PTE_S2_DEVICE) | + s2_policy(L_PTE_S2_MT_DEV_SHARED) | + L_PTE_SHARED, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PROT_SECT_DEVICE | PMD_SECT_S, .domain = DOMAIN_IO, @@ -508,7 +512,8 @@ static void __init build_mem_type_table(void) cp = &cache_policies[cachepolicy]; vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; s2_pgprot = cp->pte_s2; - hyp_device_pgprot = s2_device_pgprot = mem_types[MT_DEVICE].prot_pte; + hyp_device_pgprot = mem_types[MT_DEVICE].prot_pte; + s2_device_pgprot = mem_types[MT_DEVICE].prot_pte_s2; /* * ARMv6 and above have extended page tables. diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 45dc29f85d56..32b3558321c4 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -208,7 +208,6 @@ __v6_setup: mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register @@ -218,6 +217,8 @@ __v6_setup: ALT_UP(orr r8, r8, #TTB_FLAGS_UP) mcr p15, 0, r8, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer and + @ complete invalidations adr r5, v6_crval ldmia r5, {r5, r6} ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index bd1781979a39..74f6033e76dd 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -351,7 +351,6 @@ __v7_setup: 4: mov r10, #0 mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate - dsb #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup @@ -360,6 +359,7 @@ __v7_setup: mcr p15, 0, r5, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR #endif + dsb @ Complete invalidations #ifndef CONFIG_ARM_THUMBEE mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE and r0, r0, #(0xf << 12) @ ThumbEE enabled field diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 47c9fad43f00..ddfebddb4105 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -52,7 +52,7 @@ #include <plat/cpu.h> #include <linux/serial_core.h> -#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */ +#include <linux/serial_s3c.h> /* for s3c24xx_uart_devs */ /* clock information */ diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c index 46b426e8aff5..364963a0a344 100644 --- a/arch/arm/plat-samsung/cpu.c +++ b/arch/arm/plat-samsung/cpu.c @@ -28,13 +28,6 @@ unsigned int samsung_rev(void) } EXPORT_SYMBOL(samsung_rev); -void __init s3c24xx_init_cpu(void) -{ - /* nothing here yet */ - - samsung_cpu_rev = 0; -} - void __init s3c64xx_init_cpu(void) { samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index ac07e871f6a7..c64a39ac1b04 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -18,6 +18,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/slab.h> @@ -64,7 +65,6 @@ #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/usb-phy.h> -#include <plat/regs-serial.h> #include <plat/regs-spi.h> #include <linux/platform_data/spi-s3c64xx.h> @@ -744,10 +744,7 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210() || - soc_is_exynos4212() || soc_is_exynos4412()) - pd->bus_num = 8; - else if (soc_is_s5pv210()) + if (soc_is_s5pv210()) pd->bus_num = 3; else pd->bus_num = 0; @@ -764,10 +761,7 @@ void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, { struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; - if (soc_is_exynos4210() || - soc_is_exynos4212() || soc_is_exynos4412()) - pd->hdmiphy_bus = 8; - else if (soc_is_s5pv210()) + if (soc_is_s5pv210()) pd->hdmiphy_bus = 3; else pd->hdmiphy_bus = 0; diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 335beb341355..31164b34d4c4 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -199,7 +199,6 @@ extern void s5p_init_irq(u32 *vic, u32 num_vic); extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); -extern void s3c24xx_init_cpu(void); extern void s3c64xx_init_cpu(void); extern void s5p_init_cpu(void __iomem *cpuid_addr); diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h deleted file mode 100644 index f05f2afa440d..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ /dev/null @@ -1 +0,0 @@ -#include <linux/serial_s3c.h> diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index f48dc0a4736c..61054fd88d43 100644 --- a/arch/arm/plat-samsung/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -29,7 +29,7 @@ static void arch_detect_cpu(void); /* defines for UART registers */ -#include <plat/regs-serial.h> +#include <linux/serial_s3c.h> /* working in physical space... */ #define S3C_WDOGREG(x) ((S3C_PA_WDT + (x))) diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index aa9511b6914a..0ffc84aaf60e 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -21,6 +21,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/of.h> @@ -33,8 +34,6 @@ #include <plat/devs.h> #include <plat/clock.h> -#include <plat/regs-serial.h> - static struct cpu_table *cpu; static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode, diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index dd4c15d0d68f..da268813901b 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -196,8 +196,7 @@ struct samsung_gpio_pm samsung_gpio_pm_2bit = { .resume = samsung_gpio_pm_2bit_resume, }; -#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) \ - || defined(CONFIG_ARCH_EXYNOS) +#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); @@ -307,7 +306,7 @@ struct samsung_gpio_pm samsung_gpio_pm_4bit = { .save = samsung_gpio_pm_4bit_save, .resume = samsung_gpio_pm_4bit_resume, }; -#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P || CONFIG_ARCH_EXYNOS */ +#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */ /** * samsung_pm_save_gpio() - save gpio chip data for suspend diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index e5b0f2c2d884..ae9baa2d6381 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -18,13 +18,12 @@ #include <linux/delay.h> #include <linux/of.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/cacheflush.h> #include <asm/suspend.h> -#include <plat/regs-serial.h> - #ifdef CONFIG_SAMSUNG_ATAGS #include <mach/hardware.h> #include <mach/map.h> diff --git a/arch/arm/plat-samsung/s5p-irq-pm.c b/arch/arm/plat-samsung/s5p-irq-pm.c index 591498035916..52b16943617e 100644 --- a/arch/arm/plat-samsung/s5p-irq-pm.c +++ b/arch/arm/plat-samsung/s5p-irq-pm.c @@ -22,10 +22,7 @@ #include <mach/map.h> #include <mach/regs-gpio.h> - -#ifndef CONFIG_ARCH_EXYNOS #include <mach/regs-irq.h> -#endif /* state for IRQs over sleep */ @@ -43,18 +40,8 @@ int s3c_irq_wake(struct irq_data *data, unsigned int state) unsigned long irqbit; unsigned int irq_rtc_tic, irq_rtc_alarm; -#ifdef CONFIG_ARCH_EXYNOS - if (soc_is_exynos5250()) { - irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC; - irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM; - } else { - irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC; - irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM; - } -#else irq_rtc_tic = IRQ_RTC_TIC; irq_rtc_alarm = IRQ_RTC_ALARM; -#endif if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) { irqbit = 1 << (data->irq + 1 - irq_rtc_alarm); |