diff options
Diffstat (limited to 'arch/arm')
91 files changed, 703 insertions, 753 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index f6fcb8a79889..a810fa8ba404 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -45,35 +45,42 @@ config DEBUG_WX If in doubt, say "Y". -# RMK wants arm kernels compiled with frame pointers or stack unwinding. -# If you know what you are doing and are willing to live without stack -# traces, you can get a slightly smaller kernel by setting this option to -# n, but then RMK will have to kill you ;). -config FRAME_POINTER - bool - depends on !THUMB2_KERNEL - default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER +choice + prompt "Choose kernel unwinder" + default UNWINDER_ARM if AEABI && !FUNCTION_GRAPH_TRACER + default UNWINDER_FRAME_POINTER if !AEABI || FUNCTION_GRAPH_TRACER help - If you say N here, the resulting kernel will be slightly smaller and - faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled, - when a problem occurs with the kernel, the information that is - reported is severely limited. + This determines which method will be used for unwinding kernel stack + traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack, + livepatch, lockdep, and more. + +config UNWINDER_FRAME_POINTER + bool "Frame pointer unwinder" + depends on !THUMB2_KERNEL && !CC_IS_CLANG + select ARCH_WANT_FRAME_POINTERS + select FRAME_POINTER + help + This option enables the frame pointer unwinder for unwinding + kernel stack traces. -config ARM_UNWIND - bool "Enable stack unwinding support (EXPERIMENTAL)" +config UNWINDER_ARM + bool "ARM EABI stack unwinder" depends on AEABI - default y + select ARM_UNWIND help This option enables stack unwinding support in the kernel using the information automatically generated by the compiler. The resulting kernel image is slightly bigger but the performance is not affected. Currently, this feature - only works with EABI compilers. If unsure say Y. + only works with EABI compilers. -config OLD_MCOUNT +endchoice + +config ARM_UNWIND + bool + +config FRAME_POINTER bool - depends on FUNCTION_TRACER && FRAME_POINTER - default y config DEBUG_USER bool "Verbose user fault messages" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index d1516f85f25d..5c91e0093ee8 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -74,7 +74,7 @@ endif arch-$(CONFIG_CPU_32v5) =-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t) arch-$(CONFIG_CPU_32v4T) =-D__LINUX_ARM_ARCH__=4 -march=armv4t arch-$(CONFIG_CPU_32v4) =-D__LINUX_ARM_ARCH__=4 -march=armv4 -arch-$(CONFIG_CPU_32v3) =-D__LINUX_ARM_ARCH__=3 -march=armv3 +arch-$(CONFIG_CPU_32v3) =-D__LINUX_ARM_ARCH__=3 -march=armv3m # Evaluate arch cc-option calls now arch-y := $(arch-y) @@ -264,13 +264,9 @@ platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y))) ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y) ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y) -ifeq ($(KBUILD_SRC),) -KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs)) -else KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs)) endif endif -endif export TEXT_OFFSET GZFLAGS MMUEXT diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 517e0e18f0b8..6c7ccb428c07 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -114,6 +114,35 @@ #endif .endm + /* + * Debug kernel copy by printing the memory addresses involved + */ + .macro dbgkc, begin, end, cbegin, cend +#ifdef DEBUG + kputc #'\n' + kputc #'C' + kputc #':' + kputc #'0' + kputc #'x' + kphex \begin, 8 /* Start of compressed kernel */ + kputc #'-' + kputc #'0' + kputc #'x' + kphex \end, 8 /* End of compressed kernel */ + kputc #'-' + kputc #'>' + kputc #'0' + kputc #'x' + kphex \cbegin, 8 /* Start of kernel copy */ + kputc #'-' + kputc #'0' + kputc #'x' + kphex \cend, 8 /* End of kernel copy */ + kputc #'\n' + kputc #'\r' +#endif + .endm + .section ".start", #alloc, #execinstr /* * sort out different calling conventions @@ -450,6 +479,20 @@ dtb_check_done: add r6, r9, r5 add r9, r9, r10 +#ifdef DEBUG + sub r10, r6, r5 + sub r10, r9, r10 + /* + * We are about to copy the kernel to a new memory area. + * The boundaries of the new memory area can be found in + * r10 and r9, whilst r5 and r6 contain the boundaries + * of the memory we are going to copy. + * Calling dbgkc will help with the printing of this + * information. + */ + dbgkc r5, r6, r10, r9 +#endif + 1: ldmdb r6!, {r0 - r3, r10 - r12, lr} cmp r6, r5 stmdb r9!, {r0 - r3, r10 - r12, lr} diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index 4d969013f99a..4d969013f99a 100755..100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index f0cbd86312dc..d4b7c59eec68 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -469,6 +469,7 @@ ti,hwmods = "rtc"; clocks = <&clk_32768_ck>; clock-names = "int-clk"; + system-power-controller; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index b10dccd0958f..3b1baa8605a7 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -11,6 +11,7 @@ #include "sama5d2-pinfunc.h" #include <dt-bindings/mfd/atmel-flexcom.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/at91.h> / { model = "Atmel SAMA5D2 PTC EK"; @@ -299,6 +300,7 @@ <PIN_PA30__NWE_NANDWE>, <PIN_PB2__NRD_NANDOE>; bias-pull-up; + atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>; }; ale_cle_rdy_cs { diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index 43ee992ccdcf..6df61518776f 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -106,21 +106,23 @@ global_timer: timer@1e200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x1e200 0x20>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; clocks = <&axi_clk>; }; local_timer: local-timer@1e600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x1e600 0x20>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; clocks = <&axi_clk>; }; twd_watchdog: watchdog@1e620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0x1e620 0x20>; - interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; }; armpll: armpll { @@ -158,7 +160,7 @@ serial0: serial@600 { compatible = "brcm,bcm6345-uart"; reg = <0x600 0x1b>; - interrupts = <GIC_SPI 32 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&periph_clk>; clock-names = "periph"; status = "disabled"; @@ -167,7 +169,7 @@ serial1: serial@620 { compatible = "brcm,bcm6345-uart"; reg = <0x620 0x1b>; - interrupts = <GIC_SPI 33 0>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&periph_clk>; clock-names = "periph"; status = "disabled"; @@ -180,7 +182,7 @@ reg = <0x2000 0x600>, <0xf0 0x10>; reg-names = "nand", "nand-int-base"; status = "disabled"; - interrupts = <GIC_SPI 38 0>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "nand"; }; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 9fb47724b9c1..ad2ae25b7b4d 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -13,6 +13,43 @@ reg = <0x40000000 0x08000000>; }; + reg_vddio_sd0: regulator-vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 18 0>; + enable-active-high; + }; + + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + apb@80000000 { apbh@80000000 { gpmi-nand@8000c000 { @@ -52,31 +89,11 @@ lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a>; - lcd-supply = <®_lcd_3v3>; - display = <&display0>; status = "okay"; - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9200000>; - hactive = <480>; - vactive = <272>; - hback-porch = <15>; - hfront-porch = <8>; - vback-porch = <12>; - vfront-porch = <4>; - hsync-len = <1>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; @@ -118,32 +135,7 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_vddio_sd0: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vddio-sd0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 29 0>; - }; - - reg_lcd_3v3: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "lcd-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 18 0>; - enable-active-high; - }; - }; - - backlight { + backlight_display: backlight { compatible = "pwm-backlight"; pwms = <&pwm 2 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 6b0ae667640f..93ab5bdfe068 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -13,6 +13,87 @@ reg = <0x40000000 0x08000000>; }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vddio_sd0: regulator-vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; + + reg_fec_3v3: regulator-fec-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 15 0>; + }; + + reg_usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 9 0>; + enable-active-high; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 8 0>; + enable-active-high; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 30 0>; + enable-active-high; + }; + + reg_can_3v3: regulator-can-3v3 { + compatible = "regulator-fixed"; + regulator-name = "can-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 13 0>; + enable-active-high; + }; + + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + apb@80000000 { apbh@80000000 { gpmi-nand@8000c000 { @@ -116,31 +197,11 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_evk>; - lcd-supply = <®_lcd_3v3>; - display = <&display0>; status = "okay"; - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hback-porch = <89>; - hfront-porch = <164>; - vback-porch = <23>; - vfront-porch = <10>; - hsync-len = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; @@ -269,80 +330,6 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_vddio_sd0: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "vddio-sd0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 28 0>; - }; - - reg_fec_3v3: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "fec-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 15 0>; - }; - - reg_usb0_vbus: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usb0_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 9 0>; - enable-active-high; - }; - - reg_usb1_vbus: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "usb1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 8 0>; - enable-active-high; - }; - - reg_lcd_3v3: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "lcd-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 30 0>; - enable-active-high; - }; - - reg_can_3v3: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "can-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 13 0>; - enable-active-high; - }; - - }; - sound { compatible = "fsl,imx28-evk-sgtl5000", "fsl,mxs-audio-sgtl5000"; @@ -363,7 +350,7 @@ }; }; - backlight { + backlight_display: backlight { compatible = "pwm-backlight"; pwms = <&pwm 2 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 7423d462d1e4..50dde84b72ed 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -123,6 +123,17 @@ }; }; +&cpu0 { + /* CPU rated to 1GHz, not 1.2GHz as per the default settings */ + operating-points = < + /* kHz uV */ + 166666 850000 + 400000 900000 + 800000 1050000 + 1000000 1200000 + >; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 7cbc2ffa4b3a..7234e8330a57 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -126,10 +126,14 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + /* + * Reference manual lists pci irqs incorrectly + * Real hardware ordering is same as imx6: D+MSI, C, B, A + */ + interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, <&clks IMX7D_PCIE_PHY_ROOT_CLK>; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 12d6822f0057..04758a2a87f0 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -354,7 +354,7 @@ &mmc2 { vmmc-supply = <&vsdio>; bus-width = <8>; - non-removable; + ti,non-removable; }; &mmc3 { @@ -621,15 +621,6 @@ OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ >; }; -}; - -&omap4_pmx_wkup { - usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { - /* gpio_wk0 */ - pinctrl-single,pins = < - OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) - >; - }; vibrator_direction_pin: pinmux_vibrator_direction_pin { pinctrl-single,pins = < @@ -644,6 +635,15 @@ }; }; +&omap4_pmx_wkup { + usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { + /* gpio_wk0 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + /* * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for * uart1 wakeirq. diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index 7cb235ef0fb6..6e9e1c2f9def 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -41,7 +41,7 @@ }; macb1: ethernet@f802c000 { - compatible = "cdns,at91sam9260-macb", "cdns,macb"; + compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 661be948ab74..185541a5b69f 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -1078,8 +1078,8 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc SPI6_K>; resets = <&rcc SPI6_R>; - dmas = <&mdma1 34 0x0 0x40008 0x0 0x0 0>, - <&mdma1 35 0x0 0x40002 0x0 0x0 0>; + dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>, + <&mdma1 35 0x0 0x40002 0x0 0x0>; dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index ffd9f00f74a4..5f547c161baf 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -800,8 +800,7 @@ }; hdmi_phy: hdmi-phy@1ef0000 { - compatible = "allwinner,sun8i-r40-hdmi-phy", - "allwinner,sun50i-a64-hdmi-phy"; + compatible = "allwinner,sun8i-r40-hdmi-phy"; reg = <0x01ef0000 0x10000>; clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>, <&ccu 7>, <&ccu 16>; diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index e2c127608bcc..7eca43ff69bb 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -257,6 +257,7 @@ CONFIG_IMX_IPUV3_CORE=y CONFIG_DRM=y CONFIG_DRM_PANEL_LVDS=y CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_PANEL_SEIKO_43WVF1G=y CONFIG_DRM_DW_HDMI_AHB_AUDIO=m CONFIG_DRM_DW_HDMI_CEC=y CONFIG_DRM_IMX=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 148226e36152..7b8212857535 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -95,6 +95,7 @@ CONFIG_MFD_MXS_LRADC=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_DRM=y +CONFIG_DRM_PANEL_SEIKO_43WVF1G=y CONFIG_DRM_MXSFB=y CONFIG_FB_MODE_HELPERS=y CONFIG_BACKLIGHT_LCD_SUPPORT=y diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index df68dc4056e5..5282324c7cef 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -5,19 +5,19 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PARTITION_ADVANCED=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_VERSATILE=y CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_CMA=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=1f03 mem=32M" CONFIG_FPE_NWFPE=y CONFIG_VFP=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -59,6 +59,7 @@ CONFIG_GPIO_PL061=y CONFIG_DRM=y CONFIG_DRM_PANEL_ARM_VERSATILE=y CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_DUMB_VGA_DAC=y CONFIG_DRM_PL111=y CONFIG_FB_MODE_HELPERS=y CONFIG_BACKLIGHT_LCD_SUPPORT=y @@ -89,9 +90,10 @@ CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_ISO8859_1=m +CONFIG_FONTS=y +CONFIG_FONT_ACORN_8x8=y +CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y -CONFIG_FONTS=y -CONFIG_FONT_ACORN_8x8=y diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index b17ee03d280b..88286dd483ff 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -467,6 +467,17 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) #endif .endm + .macro uaccess_mask_range_ptr, addr:req, size:req, limit:req, tmp:req +#ifdef CONFIG_CPU_SPECTRE + sub \tmp, \limit, #1 + subs \tmp, \tmp, \addr @ tmp = limit - 1 - addr + addhs \tmp, \tmp, #1 @ if (tmp >= 0) { + subhss \tmp, \tmp, \size @ tmp = limit - (addr + size) } + movlo \addr, #0 @ if (tmp < 0) addr = NULL + csdb +#endif + .endm + .macro uaccess_disable, tmp, isb=1 #ifdef CONFIG_CPU_SW_DOMAIN_PAN /* diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h index 237aa52d8733..36c951dd23b8 100644 --- a/arch/arm/include/asm/bug.h +++ b/arch/arm/include/asm/bug.h @@ -62,8 +62,8 @@ do { \ struct pt_regs; void die(const char *msg, struct pt_regs *regs, int err); -struct siginfo; -void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, +void arm_notify_die(const char *str, struct pt_regs *regs, + int signo, int si_code, void __user *addr, unsigned long err, unsigned long trap); #ifdef CONFIG_ARM_LPAE diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 8436f6ade57d..965b7c846ecb 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -100,8 +100,10 @@ static inline unsigned long dma_max_pfn(struct device *dev) extern void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, const struct iommu_ops *iommu, bool coherent); +#ifdef CONFIG_MMU #define arch_teardown_dma_ops arch_teardown_dma_ops extern void arch_teardown_dma_ops(struct device *dev); +#endif /* do not use this function in a driver */ static inline bool is_device_dma_coherent(struct device *dev) diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index 9e842ff41768..18b0197f2384 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -16,9 +16,6 @@ extern void __gnu_mcount_nc(void); #ifdef CONFIG_DYNAMIC_FTRACE struct dyn_arch_ftrace { -#ifdef CONFIG_OLD_MCOUNT - bool old_mcount; -#endif }; static inline unsigned long ftrace_call_adjust(unsigned long addr) diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 2cfbc531f63b..6b51826ab3d1 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -28,7 +28,6 @@ #include <asm/byteorder.h> #include <asm/memory.h> #include <asm-generic/pci_iomap.h> -#include <xen/xen.h> /* * ISA I/O bus memory addresses are 1:1 with the physical address. @@ -459,20 +458,6 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); #include <asm-generic/io.h> -/* - * can the hardware map this into one segment or not, given no other - * constraints. - */ -#define BIOVEC_MERGEABLE(vec1, vec2) \ - ((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2))) - -struct bio_vec; -extern bool xen_biovec_phys_mergeable(const struct bio_vec *vec1, - const struct bio_vec *vec2); -#define BIOVEC_PHYS_MERGEABLE(vec1, vec2) \ - (__BIOVEC_PHYS_MERGEABLE(vec1, vec2) && \ - (!xen_domain() || xen_biovec_phys_mergeable(vec1, vec2))) - #ifdef CONFIG_MMU #define ARCH_HAS_VALID_PHYS_ADDR_RANGE extern int valid_phys_addr_range(phys_addr_t addr, size_t size); diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h index 3ab8b3781bfe..2d43dca29c72 100644 --- a/arch/arm/include/asm/kvm_arm.h +++ b/arch/arm/include/asm/kvm_arm.h @@ -161,6 +161,7 @@ #else #define VTTBR_X (5 - KVM_T0SZ) #endif +#define VTTBR_CNP_BIT _AC(1, UL) #define VTTBR_BADDR_MASK (((_AC(1, ULL) << (40 - VTTBR_X)) - 1) << VTTBR_X) #define VTTBR_VMID_SHIFT _AC(48, ULL) #define VTTBR_VMID_MASK(size) (_AT(u64, (1 << size) - 1) << VTTBR_VMID_SHIFT) diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 79906cecb091..3ad482d2f1eb 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -223,7 +223,6 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu, struct kvm_vcpu_events *events); #define KVM_ARCH_WANT_MMU_NOTIFIER -int kvm_unmap_hva(struct kvm *kvm, unsigned long hva); int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end); void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte); diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 265ea9cf7df7..847f01fa429d 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -355,6 +355,11 @@ static inline int hyp_map_aux_data(void) #define kvm_phys_to_vttbr(addr) (addr) +static inline bool kvm_cpu_has_cnp(void) +{ + return false; +} + #endif /* !__ASSEMBLY__ */ #endif /* __ARM_KVM_MMU_H__ */ diff --git a/arch/arm/include/asm/paravirt.h b/arch/arm/include/asm/paravirt.h index d51e5cd31d01..cdbf02d9c1d4 100644 --- a/arch/arm/include/asm/paravirt.h +++ b/arch/arm/include/asm/paravirt.h @@ -10,11 +10,16 @@ extern struct static_key paravirt_steal_rq_enabled; struct pv_time_ops { unsigned long long (*steal_clock)(int cpu); }; -extern struct pv_time_ops pv_time_ops; + +struct paravirt_patch_template { + struct pv_time_ops time; +}; + +extern struct paravirt_patch_template pv_ops; static inline u64 paravirt_steal_clock(int cpu) { - return pv_time_ops.steal_clock(cpu); + return pv_ops.time.steal_clock(cpu); } #endif diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 9b37b6ab27fe..8f55dc520a3e 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -121,8 +121,8 @@ extern void vfp_flush_hwstate(struct thread_info *); struct user_vfp; struct user_vfp_exc; -extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *, - struct user_vfp_exc __user *); +extern int vfp_preserve_user_clear_hwstate(struct user_vfp *, + struct user_vfp_exc *); extern int vfp_restore_user_hwstate(struct user_vfp *, struct user_vfp_exc *); #endif diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index 5d88d2f22b2c..2a786f54d8b8 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -33,6 +33,9 @@ const struct cpumask *cpu_coregroup_mask(int cpu); /* Replace task scheduler's default cpu-invariant accounting */ #define arch_scale_cpu_capacity topology_get_cpu_scale +/* Enable topology flag updates */ +#define arch_update_cpu_topology topology_update_cpu_topology + #else static inline void init_cpu_topology(void) { } diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 5451e1f05a19..c136eef8f690 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -69,6 +69,14 @@ extern int __put_user_bad(void); static inline void set_fs(mm_segment_t fs) { current_thread_info()->addr_limit = fs; + + /* + * Prevent a mispredicted conditional call to set_fs from forwarding + * the wrong address limit to access_ok under speculation. + */ + dsb(nsh); + isb(); + modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER); } @@ -92,6 +100,32 @@ static inline void set_fs(mm_segment_t fs) __typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL)) /* + * Sanitise a uaccess pointer such that it becomes NULL if addr+size + * is above the current addr_limit. + */ +#define uaccess_mask_range_ptr(ptr, size) \ + ((__typeof__(ptr))__uaccess_mask_range_ptr(ptr, size)) +static inline void __user *__uaccess_mask_range_ptr(const void __user *ptr, + size_t size) +{ + void __user *safe_ptr = (void __user *)ptr; + unsigned long tmp; + + asm volatile( + " sub %1, %3, #1\n" + " subs %1, %1, %0\n" + " addhs %1, %1, #1\n" + " subhss %1, %1, %2\n" + " movlo %0, #0\n" + : "+r" (safe_ptr), "=&r" (tmp) + : "r" (size), "r" (current_thread_info()->addr_limit) + : "cc"); + + csdb(); + return safe_ptr; +} + +/* * Single-value transfer routines. They automatically use the right * size if we just have the right pointer type. Note that the functions * which read from user space (*get_*) need to take care not to leak @@ -362,6 +396,14 @@ do { \ __pu_err; \ }) +#ifdef CONFIG_CPU_SPECTRE +/* + * When mitigating Spectre variant 1.1, all accessors need to include + * verification of the address space. + */ +#define __put_user(x, ptr) put_user(x, ptr) + +#else #define __put_user(x, ptr) \ ({ \ long __pu_err = 0; \ @@ -369,12 +411,6 @@ do { \ __pu_err; \ }) -#define __put_user_error(x, ptr, err) \ -({ \ - __put_user_switch((x), (ptr), (err), __put_user_nocheck); \ - (void) 0; \ -}) - #define __put_user_nocheck(x, __pu_ptr, __err, __size) \ do { \ unsigned long __pu_addr = (unsigned long)__pu_ptr; \ @@ -454,6 +490,7 @@ do { \ : "r" (x), "i" (-EFAULT) \ : "cc") +#endif /* !CONFIG_CPU_SPECTRE */ #ifdef CONFIG_MMU extern unsigned long __must_check diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 783fbb4de5f9..8fa2dc21d332 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -167,9 +167,6 @@ EXPORT_SYMBOL(_find_next_bit_be); #endif #ifdef CONFIG_FUNCTION_TRACER -#ifdef CONFIG_OLD_MCOUNT -EXPORT_SYMBOL(mcount); -#endif EXPORT_SYMBOL(__gnu_mcount_nc); #endif diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 746565a876dc..0465d65d23de 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -296,16 +296,15 @@ __sys_trace: cmp scno, #-1 @ skip the syscall? bne 2b add sp, sp, #S_OFF @ restore stack - b ret_slow_syscall -__sys_trace_return: - str r0, [sp, #S_R0 + S_OFF]! @ save returned r0 +__sys_trace_return_nosave: + enable_irq_notrace mov r0, sp bl syscall_trace_exit b ret_slow_syscall -__sys_trace_return_nosave: - enable_irq_notrace +__sys_trace_return: + str r0, [sp, #S_R0 + S_OFF]! @ save returned r0 mov r0, sp bl syscall_trace_exit b ret_slow_syscall diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S index efcd9f25a14b..0be69e551a64 100644 --- a/arch/arm/kernel/entry-ftrace.S +++ b/arch/arm/kernel/entry-ftrace.S @@ -15,23 +15,8 @@ * start of every function. In mcount, apart from the function's address (in * lr), we need to get hold of the function's caller's address. * - * Older GCCs (pre-4.4) inserted a call to a routine called mcount like this: - * - * bl mcount - * - * These versions have the limitation that in order for the mcount routine to - * be able to determine the function's caller's address, an APCS-style frame - * pointer (which is set up with something like the code below) is required. - * - * mov ip, sp - * push {fp, ip, lr, pc} - * sub fp, ip, #4 - * - * With EABI, these frame pointers are not available unless -mapcs-frame is - * specified, and if building as Thumb-2, not even then. - * - * Newer GCCs (4.4+) solve this problem by introducing a new version of mcount, - * with call sites like: + * Newer GCCs (4.4+) solve this problem by using a version of mcount with call + * sites like: * * push {lr} * bl __gnu_mcount_nc @@ -46,17 +31,10 @@ * allows it to be clobbered in subroutines and doesn't use it to hold * parameters.) * - * When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0" - * for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see - * arch/arm/kernel/ftrace.c). + * When using dynamic ftrace, we patch out the mcount call by a "pop {lr}" + * instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c). */ -#ifndef CONFIG_OLD_MCOUNT -#if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4)) -#error Ftrace requires CONFIG_FRAME_POINTER=y with GCC older than 4.4.0. -#endif -#endif - .macro mcount_adjust_addr rd, rn bic \rd, \rn, #1 @ clear the Thumb bit if present sub \rd, \rd, #MCOUNT_INSN_SIZE @@ -209,51 +187,6 @@ ftrace_graph_call\suffix: mcount_exit .endm -#ifdef CONFIG_OLD_MCOUNT -/* - * mcount - */ - -.macro mcount_enter - stmdb sp!, {r0-r3, lr} -.endm - -.macro mcount_get_lr reg - ldr \reg, [fp, #-4] -.endm - -.macro mcount_exit - ldr lr, [fp, #-4] - ldmia sp!, {r0-r3, pc} -.endm - -ENTRY(mcount) -#ifdef CONFIG_DYNAMIC_FTRACE - stmdb sp!, {lr} - ldr lr, [fp, #-4] - ldmia sp!, {pc} -#else - __mcount _old -#endif -ENDPROC(mcount) - -#ifdef CONFIG_DYNAMIC_FTRACE -ENTRY(ftrace_caller_old) - __ftrace_caller _old -ENDPROC(ftrace_caller_old) -#endif - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -ENTRY(ftrace_graph_caller_old) - __ftrace_graph_caller -ENDPROC(ftrace_graph_caller_old) -#endif - -.purgem mcount_enter -.purgem mcount_get_lr -.purgem mcount_exit -#endif - /* * __gnu_mcount_nc */ diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index 5617932a83df..0142fcfcc3d3 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -47,30 +47,6 @@ void arch_ftrace_update_code(int command) stop_machine(__ftrace_modify_code, &command, NULL); } -#ifdef CONFIG_OLD_MCOUNT -#define OLD_MCOUNT_ADDR ((unsigned long) mcount) -#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old) - -#define OLD_NOP 0xe1a00000 /* mov r0, r0 */ - -static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec) -{ - return rec->arch.old_mcount ? OLD_NOP : NOP; -} - -static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) -{ - if (!rec->arch.old_mcount) - return addr; - - if (addr == MCOUNT_ADDR) - addr = OLD_MCOUNT_ADDR; - else if (addr == FTRACE_ADDR) - addr = OLD_FTRACE_ADDR; - - return addr; -} -#else static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec) { return NOP; @@ -80,7 +56,6 @@ static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) { return addr; } -#endif int ftrace_arch_code_modify_prepare(void) { @@ -150,15 +125,6 @@ int ftrace_update_ftrace_func(ftrace_func_t func) } #endif -#ifdef CONFIG_OLD_MCOUNT - if (!ret) { - pc = (unsigned long)&ftrace_call_old; - new = ftrace_call_replace(pc, (unsigned long)func); - - ret = ftrace_modify_code(pc, 0, new, false); - } -#endif - return ret; } @@ -203,16 +169,6 @@ int ftrace_make_nop(struct module *mod, new = ftrace_nop_replace(rec); ret = ftrace_modify_code(ip, old, new, true); -#ifdef CONFIG_OLD_MCOUNT - if (ret == -EINVAL && addr == MCOUNT_ADDR) { - rec->arch.old_mcount = true; - - old = ftrace_call_replace(ip, adjust_address(rec, addr)); - new = ftrace_nop_replace(rec); - ret = ftrace_modify_code(ip, old, new, true); - } -#endif - return ret; } @@ -290,13 +246,6 @@ static int ftrace_modify_graph_caller(bool enable) #endif -#ifdef CONFIG_OLD_MCOUNT - if (!ret) - ret = __ftrace_modify_caller(&ftrace_graph_call_old, - ftrace_graph_caller_old, - enable); -#endif - return ret; } diff --git a/arch/arm/kernel/paravirt.c b/arch/arm/kernel/paravirt.c index 53f371ed4568..75c158b0353f 100644 --- a/arch/arm/kernel/paravirt.c +++ b/arch/arm/kernel/paravirt.c @@ -21,5 +21,5 @@ struct static_key paravirt_steal_enabled; struct static_key paravirt_steal_rq_enabled; -struct pv_time_ops pv_time_ops; -EXPORT_SYMBOL_GPL(pv_time_ops); +struct paravirt_patch_template pv_ops; +EXPORT_SYMBOL_GPL(pv_ops); diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 36718a424358..6fa5b6387556 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -203,15 +203,8 @@ void ptrace_disable(struct task_struct *child) */ void ptrace_break(struct task_struct *tsk, struct pt_regs *regs) { - siginfo_t info; - - clear_siginfo(&info); - info.si_signo = SIGTRAP; - info.si_errno = 0; - info.si_code = TRAP_BRKPT; - info.si_addr = (void __user *)instruction_pointer(regs); - - force_sig_info(SIGTRAP, &info, tsk); + force_sig_fault(SIGTRAP, TRAP_BRKPT, + (void __user *)instruction_pointer(regs), tsk); } static int break_trap(struct pt_regs *regs, unsigned int instr) diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index b8f766cf3a90..b908382b69ff 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -77,8 +77,6 @@ static int preserve_iwmmxt_context(struct iwmmxt_sigframe __user *frame) kframe->magic = IWMMXT_MAGIC; kframe->size = IWMMXT_STORAGE_SIZE; iwmmxt_task_copy(current_thread_info(), &kframe->storage); - - err = __copy_to_user(frame, kframe, sizeof(*frame)); } else { /* * For bug-compatibility with older kernels, some space @@ -86,10 +84,14 @@ static int preserve_iwmmxt_context(struct iwmmxt_sigframe __user *frame) * Set the magic and size appropriately so that properly * written userspace can skip it reliably: */ - __put_user_error(DUMMY_MAGIC, &frame->magic, err); - __put_user_error(IWMMXT_STORAGE_SIZE, &frame->size, err); + *kframe = (struct iwmmxt_sigframe) { + .magic = DUMMY_MAGIC, + .size = IWMMXT_STORAGE_SIZE, + }; } + err = __copy_to_user(frame, kframe, sizeof(*kframe)); + return err; } @@ -135,17 +137,18 @@ static int restore_iwmmxt_context(char __user **auxp) static int preserve_vfp_context(struct vfp_sigframe __user *frame) { - const unsigned long magic = VFP_MAGIC; - const unsigned long size = VFP_STORAGE_SIZE; + struct vfp_sigframe kframe; int err = 0; - __put_user_error(magic, &frame->magic, err); - __put_user_error(size, &frame->size, err); + memset(&kframe, 0, sizeof(kframe)); + kframe.magic = VFP_MAGIC; + kframe.size = VFP_STORAGE_SIZE; + err = vfp_preserve_user_clear_hwstate(&kframe.ufp, &kframe.ufp_exc); if (err) - return -EFAULT; + return err; - return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc); + return __copy_to_user(frame, &kframe, sizeof(kframe)); } static int restore_vfp_context(char __user **auxp) @@ -288,30 +291,35 @@ static int setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set) { struct aux_sigframe __user *aux; + struct sigcontext context; int err = 0; - __put_user_error(regs->ARM_r0, &sf->uc.uc_mcontext.arm_r0, err); - __put_user_error(regs->ARM_r1, &sf->uc.uc_mcontext.arm_r1, err); - __put_user_error(regs->ARM_r2, &sf->uc.uc_mcontext.arm_r2, err); - __put_user_error(regs->ARM_r3, &sf->uc.uc_mcontext.arm_r3, err); - __put_user_error(regs->ARM_r4, &sf->uc.uc_mcontext.arm_r4, err); - __put_user_error(regs->ARM_r5, &sf->uc.uc_mcontext.arm_r5, err); - __put_user_error(regs->ARM_r6, &sf->uc.uc_mcontext.arm_r6, err); - __put_user_error(regs->ARM_r7, &sf->uc.uc_mcontext.arm_r7, err); - __put_user_error(regs->ARM_r8, &sf->uc.uc_mcontext.arm_r8, err); - __put_user_error(regs->ARM_r9, &sf->uc.uc_mcontext.arm_r9, err); - __put_user_error(regs->ARM_r10, &sf->uc.uc_mcontext.arm_r10, err); - __put_user_error(regs->ARM_fp, &sf->uc.uc_mcontext.arm_fp, err); - __put_user_error(regs->ARM_ip, &sf->uc.uc_mcontext.arm_ip, err); - __put_user_error(regs->ARM_sp, &sf->uc.uc_mcontext.arm_sp, err); - __put_user_error(regs->ARM_lr, &sf->uc.uc_mcontext.arm_lr, err); - __put_user_error(regs->ARM_pc, &sf->uc.uc_mcontext.arm_pc, err); - __put_user_error(regs->ARM_cpsr, &sf->uc.uc_mcontext.arm_cpsr, err); - - __put_user_error(current->thread.trap_no, &sf->uc.uc_mcontext.trap_no, err); - __put_user_error(current->thread.error_code, &sf->uc.uc_mcontext.error_code, err); - __put_user_error(current->thread.address, &sf->uc.uc_mcontext.fault_address, err); - __put_user_error(set->sig[0], &sf->uc.uc_mcontext.oldmask, err); + context = (struct sigcontext) { + .arm_r0 = regs->ARM_r0, + .arm_r1 = regs->ARM_r1, + .arm_r2 = regs->ARM_r2, + .arm_r3 = regs->ARM_r3, + .arm_r4 = regs->ARM_r4, + .arm_r5 = regs->ARM_r5, + .arm_r6 = regs->ARM_r6, + .arm_r7 = regs->ARM_r7, + .arm_r8 = regs->ARM_r8, + .arm_r9 = regs->ARM_r9, + .arm_r10 = regs->ARM_r10, + .arm_fp = regs->ARM_fp, + .arm_ip = regs->ARM_ip, + .arm_sp = regs->ARM_sp, + .arm_lr = regs->ARM_lr, + .arm_pc = regs->ARM_pc, + .arm_cpsr = regs->ARM_cpsr, + + .trap_no = current->thread.trap_no, + .error_code = current->thread.error_code, + .fault_address = current->thread.address, + .oldmask = set->sig[0], + }; + + err |= __copy_to_user(&sf->uc.uc_mcontext, &context, sizeof(context)); err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set)); @@ -328,7 +336,7 @@ setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set) if (err == 0) err |= preserve_vfp_context(&aux->vfp); #endif - __put_user_error(0, &aux->end_magic, err); + err |= __put_user(0, &aux->end_magic); return err; } @@ -491,7 +499,7 @@ setup_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) /* * Set uc.uc_flags to a value which sc.trap_no would never have. */ - __put_user_error(0x5ac3c35a, &frame->uc.uc_flags, err); + err = __put_user(0x5ac3c35a, &frame->uc.uc_flags); err |= setup_sigframe(frame, regs, set); if (err == 0) @@ -511,8 +519,8 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) err |= copy_siginfo_to_user(&frame->info, &ksig->info); - __put_user_error(0, &frame->sig.uc.uc_flags, err); - __put_user_error(NULL, &frame->sig.uc.uc_link, err); + err |= __put_user(0, &frame->sig.uc.uc_flags); + err |= __put_user(NULL, &frame->sig.uc.uc_link); err |= __save_altstack(&frame->sig.uc.uc_stack, regs->ARM_sp); err |= setup_sigframe(&frame->sig, regs, set); diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 80517f293eb9..a188d5e8ab7f 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -98,22 +98,20 @@ static int proc_status_show(struct seq_file *m, void *v) */ static void set_segfault(struct pt_regs *regs, unsigned long addr) { - siginfo_t info; + int si_code; - clear_siginfo(&info); down_read(¤t->mm->mmap_sem); if (find_vma(current->mm, addr) == NULL) - info.si_code = SEGV_MAPERR; + si_code = SEGV_MAPERR; else - info.si_code = SEGV_ACCERR; + si_code = SEGV_ACCERR; up_read(¤t->mm->mmap_sem); - info.si_signo = SIGSEGV; - info.si_errno = 0; - info.si_addr = (void *) instruction_pointer(regs); - pr_debug("SWP{B} emulation: access caused memory abort!\n"); - arm_notify_die("Illegal memory access", regs, &info, 0, 0); + arm_notify_die("Illegal memory access", regs, + SIGSEGV, si_code, + (void __user *)instruction_pointer(regs), + 0, 0); abtcounter++; } diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index f0dd4b6ebb63..40da0872170f 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -277,6 +277,7 @@ asmlinkage long sys_oabi_epoll_wait(int epfd, int maxevents, int timeout) { struct epoll_event *kbuf; + struct oabi_epoll_event e; mm_segment_t fs; long ret, err, i; @@ -295,8 +296,11 @@ asmlinkage long sys_oabi_epoll_wait(int epfd, set_fs(fs); err = 0; for (i = 0; i < ret; i++) { - __put_user_error(kbuf[i].events, &events->events, err); - __put_user_error(kbuf[i].data, &events->data, err); + e.events = kbuf[i].events; + e.data = kbuf[i].data; + err = __copy_to_user(events, &e, sizeof(e)); + if (err) + break; events++; } kfree(kbuf); diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index badf02ca3693..2d668cff8ef4 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -365,13 +365,14 @@ void die(const char *str, struct pt_regs *regs, int err) } void arm_notify_die(const char *str, struct pt_regs *regs, - struct siginfo *info, unsigned long err, unsigned long trap) + int signo, int si_code, void __user *addr, + unsigned long err, unsigned long trap) { if (user_mode(regs)) { current->thread.error_code = err; current->thread.trap_no = trap; - force_sig_info(info->si_signo, info, current); + force_sig_fault(signo, si_code, addr, current); } else { die(str, regs, err); } @@ -438,10 +439,8 @@ int call_undef_hook(struct pt_regs *regs, unsigned int instr) asmlinkage void do_undefinstr(struct pt_regs *regs) { unsigned int instr; - siginfo_t info; void __user *pc; - clear_siginfo(&info); pc = (void __user *)instruction_pointer(regs); if (processor_mode(regs) == SVC_MODE) { @@ -485,13 +484,8 @@ die_sig: dump_instr(KERN_INFO, regs); } #endif - - info.si_signo = SIGILL; - info.si_errno = 0; - info.si_code = ILL_ILLOPC; - info.si_addr = pc; - - arm_notify_die("Oops - undefined instruction", regs, &info, 0, 6); + arm_notify_die("Oops - undefined instruction", regs, + SIGILL, ILL_ILLOPC, pc, 0, 6); } NOKPROBE_SYMBOL(do_undefinstr) @@ -539,9 +533,6 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason) static int bad_syscall(int n, struct pt_regs *regs) { - siginfo_t info; - - clear_siginfo(&info); if ((current->personality & PER_MASK) != PER_LINUX) { send_sig(SIGSEGV, current, 1); return regs->ARM_r0; @@ -555,13 +546,10 @@ static int bad_syscall(int n, struct pt_regs *regs) } #endif - info.si_signo = SIGILL; - info.si_errno = 0; - info.si_code = ILL_ILLTRP; - info.si_addr = (void __user *)instruction_pointer(regs) - - (thumb_mode(regs) ? 2 : 4); - - arm_notify_die("Oops - bad syscall", regs, &info, n, 0); + arm_notify_die("Oops - bad syscall", regs, SIGILL, ILL_ILLTRP, + (void __user *)instruction_pointer(regs) - + (thumb_mode(regs) ? 2 : 4), + n, 0); return regs->ARM_r0; } @@ -607,20 +595,13 @@ do_cache_op(unsigned long start, unsigned long end, int flags) #define NR(x) ((__ARM_NR_##x) - __ARM_NR_BASE) asmlinkage int arm_syscall(int no, struct pt_regs *regs) { - siginfo_t info; - - clear_siginfo(&info); if ((no >> 16) != (__ARM_NR_BASE>> 16)) return bad_syscall(no, regs); switch (no & 0xffff) { case 0: /* branch through 0 */ - info.si_signo = SIGSEGV; - info.si_errno = 0; - info.si_code = SEGV_MAPERR; - info.si_addr = NULL; - - arm_notify_die("branch through zero", regs, &info, 0, 0); + arm_notify_die("branch through zero", regs, + SIGSEGV, SEGV_MAPERR, NULL, 0, 0); return 0; case NR(breakpoint): /* SWI BREAK_POINT */ @@ -688,13 +669,10 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) } } #endif - info.si_signo = SIGILL; - info.si_errno = 0; - info.si_code = ILL_ILLTRP; - info.si_addr = (void __user *)instruction_pointer(regs) - - (thumb_mode(regs) ? 2 : 4); - - arm_notify_die("Oops - bad syscall(2)", regs, &info, no, 0); + arm_notify_die("Oops - bad syscall(2)", regs, SIGILL, ILL_ILLTRP, + (void __user *)instruction_pointer(regs) - + (thumb_mode(regs) ? 2 : 4), + no, 0); return 0; } @@ -744,9 +722,6 @@ asmlinkage void baddataabort(int code, unsigned long instr, struct pt_regs *regs) { unsigned long addr = instruction_pointer(regs); - siginfo_t info; - - clear_siginfo(&info); #ifdef CONFIG_DEBUG_USER if (user_debug & UDBG_BADABORT) { @@ -757,12 +732,8 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs) } #endif - info.si_signo = SIGILL; - info.si_errno = 0; - info.si_code = ILL_ILLOPC; - info.si_addr = (void __user *)addr; - - arm_notify_die("unknown data abort code", regs, &info, instr, 0); + arm_notify_die("unknown data abort code", regs, + SIGILL, ILL_ILLOPC, (void __user *)addr, instr, 0); } void __readwrite_bug(const char *fn) diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index 3593d5c1acd2..8c74037ade22 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -96,7 +96,6 @@ SECTIONS INIT_SETUP(16) INIT_CALLS CON_INITCALL - SECURITY_INITCALL INIT_RAM_FS } diff --git a/arch/arm/kernel/vmlinux.lds.h b/arch/arm/kernel/vmlinux.lds.h index ae5fdff18406..8247bc15addc 100644 --- a/arch/arm/kernel/vmlinux.lds.h +++ b/arch/arm/kernel/vmlinux.lds.h @@ -49,6 +49,8 @@ #define ARM_DISCARD \ *(.ARM.exidx.exit.text) \ *(.ARM.extab.exit.text) \ + *(.ARM.exidx.text.exit) \ + *(.ARM.extab.text.exit) \ ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) \ ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) \ ARM_EXIT_DISCARD(EXIT_TEXT) \ diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index 450c7a4fbc8a..cb094e55dc5f 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -478,15 +478,15 @@ static const struct coproc_reg cp15_regs[] = { /* ICC_SGI1R */ { CRm64(12), Op1( 0), is64, access_gic_sgi}, - /* ICC_ASGI1R */ - { CRm64(12), Op1( 1), is64, access_gic_sgi}, - /* ICC_SGI0R */ - { CRm64(12), Op1( 2), is64, access_gic_sgi}, /* VBAR: swapped by interrupt.S. */ { CRn(12), CRm( 0), Op1( 0), Op2( 0), is32, NULL, reset_val, c12_VBAR, 0x00000000 }, + /* ICC_ASGI1R */ + { CRm64(12), Op1( 1), is64, access_gic_sgi}, + /* ICC_SGI0R */ + { CRm64(12), Op1( 2), is64, access_gic_sgi}, /* ICC_SRE */ { CRn(12), CRm(12), Op1( 0), Op2(5), is32, access_gic_sre }, diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S index a826df3d3814..6709a8d33963 100644 --- a/arch/arm/lib/copy_from_user.S +++ b/arch/arm/lib/copy_from_user.S @@ -93,11 +93,7 @@ ENTRY(arm_copy_from_user) #ifdef CONFIG_CPU_SPECTRE get_thread_info r3 ldr r3, [r3, #TI_ADDR_LIMIT] - adds ip, r1, r2 @ ip=addr+size - sub r3, r3, #1 @ addr_limit - 1 - cmpcc ip, r3 @ if (addr+size > addr_limit - 1) - movcs r1, #0 @ addr = NULL - csdb + uaccess_mask_range_ptr r1, r2, r3, ip #endif #include "copy_template.S" diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S index caf5019d8161..970abe521197 100644 --- a/arch/arm/lib/copy_to_user.S +++ b/arch/arm/lib/copy_to_user.S @@ -94,6 +94,11 @@ ENTRY(__copy_to_user_std) WEAK(arm_copy_to_user) +#ifdef CONFIG_CPU_SPECTRE + get_thread_info r3 + ldr r3, [r3, #TI_ADDR_LIMIT] + uaccess_mask_range_ptr r0, r2, r3, ip +#endif #include "copy_template.S" @@ -108,4 +113,3 @@ ENDPROC(__copy_to_user_std) rsb r0, r0, r2 copy_abort_end .popsection - diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 9b4ed1728616..73dc7360cbdd 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -152,7 +152,8 @@ arm_copy_to_user(void __user *to, const void *from, unsigned long n) n = __copy_to_user_std(to, from, n); uaccess_restore(ua_flags); } else { - n = __copy_to_user_memcpy(to, from, n); + n = __copy_to_user_memcpy(uaccess_mask_range_ptr(to, n), + from, n); } return n; } diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 353f9e5a1454..efdaa27241c5 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -130,10 +130,10 @@ static struct platform_device davinci_fb_device = { }; static const struct gpio_led ntosd2_leds[] = { - { .name = "led1_green", .gpio = GPIO(10), }, - { .name = "led1_red", .gpio = GPIO(11), }, - { .name = "led2_green", .gpio = GPIO(12), }, - { .name = "led2_red", .gpio = GPIO(13), }, + { .name = "led1_green", .gpio = 10, }, + { .name = "led1_red", .gpio = 11, }, + { .name = "led2_green", .gpio = 12, }, + { .name = "led2_red", .gpio = 13, }, }; static struct gpio_led_platform_data ntosd2_leds_data = { diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index faf48a3b1fea..706515faee06 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -141,6 +141,15 @@ EXPORT_SYMBOL_GPL(ep93xx_chip_revision); *************************************************************************/ static struct resource ep93xx_gpio_resource[] = { DEFINE_RES_MEM(EP93XX_GPIO_PHYS_BASE, 0xcc), + DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB), + DEFINE_RES_IRQ(IRQ_EP93XX_GPIO0MUX), + DEFINE_RES_IRQ(IRQ_EP93XX_GPIO1MUX), + DEFINE_RES_IRQ(IRQ_EP93XX_GPIO2MUX), + DEFINE_RES_IRQ(IRQ_EP93XX_GPIO3MUX), + DEFINE_RES_IRQ(IRQ_EP93XX_GPIO4MUX), + DEFINE_RES_IRQ(IRQ_EP93XX_GPIO5MUX), + DEFINE_RES_IRQ(IRQ_EP93XX_GPIO6MUX), + DEFINE_RES_IRQ(IRQ_EP93XX_GPIO7MUX), }; static struct platform_device ep93xx_gpio_device = { diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 45940c1d7787..cf0cb58b3454 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -23,8 +23,7 @@ #include <linux/i2c.h> #include <linux/fb.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/rawnand.h> +#include <linux/mtd/platnand.h> #include <mach/hardware.h> #include <linux/platform_data/video-ep93xx.h> @@ -43,12 +42,11 @@ #define SNAPPERCL15_NAND_CEN (1 << 11) /* Chip enable (active low) */ #define SNAPPERCL15_NAND_RDY (1 << 14) /* Device ready */ -#define NAND_CTRL_ADDR(chip) (chip->IO_ADDR_W + 0x40) +#define NAND_CTRL_ADDR(chip) (chip->legacy.IO_ADDR_W + 0x40) -static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, +static void snappercl15_nand_cmd_ctrl(struct nand_chip *chip, int cmd, unsigned int ctrl) { - struct nand_chip *chip = mtd_to_nand(mtd); static u16 nand_state = SNAPPERCL15_NAND_WPN; u16 set; @@ -70,13 +68,12 @@ static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, } if (cmd != NAND_CMD_NONE) - __raw_writew((cmd & 0xff) | nand_state, chip->IO_ADDR_W); + __raw_writew((cmd & 0xff) | nand_state, + chip->legacy.IO_ADDR_W); } -static int snappercl15_nand_dev_ready(struct mtd_info *mtd) +static int snappercl15_nand_dev_ready(struct nand_chip *chip) { - struct nand_chip *chip = mtd_to_nand(mtd); - return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY); } diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index c089a2a4fe30..c6a533699b00 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -16,8 +16,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> +#include <linux/mtd/platnand.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/spi/mmc_spi.h> @@ -76,13 +75,11 @@ static void __init ts72xx_map_io(void) #define TS72XX_NAND_CONTROL_ADDR_LINE 22 /* 0xN0400000 */ #define TS72XX_NAND_BUSY_ADDR_LINE 23 /* 0xN0800000 */ -static void ts72xx_nand_hwcontrol(struct mtd_info *mtd, +static void ts72xx_nand_hwcontrol(struct nand_chip *chip, int cmd, unsigned int ctrl) { - struct nand_chip *chip = mtd_to_nand(mtd); - if (ctrl & NAND_CTRL_CHANGE) { - void __iomem *addr = chip->IO_ADDR_R; + void __iomem *addr = chip->legacy.IO_ADDR_R; unsigned char bits; addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE); @@ -96,13 +93,12 @@ static void ts72xx_nand_hwcontrol(struct mtd_info *mtd, } if (cmd != NAND_CMD_NONE) - __raw_writeb(cmd, chip->IO_ADDR_W); + __raw_writeb(cmd, chip->legacy.IO_ADDR_W); } -static int ts72xx_nand_device_ready(struct mtd_info *mtd) +static int ts72xx_nand_device_ready(struct nand_chip *chip) { - struct nand_chip *chip = mtd_to_nand(mtd); - void __iomem *addr = chip->IO_ADDR_R; + void __iomem *addr = chip->legacy.IO_ADDR_R; addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE); diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 5e366824814f..2e1e540f2e5a 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -18,6 +18,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> #include <linux/gpio/driver.h> +#include <linux/gpio/machine.h> #include <linux/gpio.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> @@ -175,6 +176,7 @@ static struct resource mx21ads_mmgpio_resource = DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat"); static struct bgpio_pdata mx21ads_mmgpio_pdata = { + .label = "mx21ads-mmgpio", .base = MX21ADS_MMGPIO_BASE, .ngpio = 16, }; @@ -203,7 +205,6 @@ static struct regulator_init_data mx21ads_lcd_regulator_init_data = { static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = { .supply_name = "LCD", .microvolts = 3300000, - .gpio = MX21ADS_IO_LCDON, .enable_high = 1, .init_data = &mx21ads_lcd_regulator_init_data, }; @@ -216,6 +217,14 @@ static struct platform_device mx21ads_lcd_regulator = { }, }; +static struct gpiod_lookup_table mx21ads_lcd_regulator_gpiod_table = { + .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */ + .table = { + GPIO_LOOKUP("mx21ads-mmgpio", 9, NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* * Connected is a portrait Sharp-QVGA display * of type: LQ035Q7DB02 @@ -311,6 +320,7 @@ static void __init mx21ads_late_init(void) { imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata); + gpiod_add_lookup_table(&mx21ads_lcd_regulator_gpiod_table); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); mx21ads_cs8900_resources[1].start = diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index a04bb094ded1..f5e04047ed13 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -16,6 +16,7 @@ #include <linux/gpio/driver.h> /* Needed for gpio_to_irq() */ #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> @@ -230,10 +231,17 @@ static struct regulator_init_data mx27ads_lcd_regulator_init_data = { static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = { .supply_name = "LCD", .microvolts = 3300000, - .gpio = MX27ADS_LCD_GPIO, .init_data = &mx27ads_lcd_regulator_init_data, }; +static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = { + .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */ + .table = { + GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init mx27ads_regulator_init(void) { struct gpio_chip *vchip; @@ -247,6 +255,8 @@ static void __init mx27ads_regulator_init(void) vchip->set = vgpio_set; gpiochip_add_data(vchip, NULL); + gpiod_add_lookup_table(&mx27ads_lcd_regulator_gpiod_table); + platform_device_register_data(NULL, "reg-fixed-voltage", PLATFORM_DEVID_AUTO, &mx27ads_lcd_regulator_pdata, diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 42a700053103..5c5df8ca38dd 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -18,7 +18,7 @@ #include <linux/memory.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> -#include <linux/mtd/rawnand.h> +#include <linux/mtd/platnand.h> #include <linux/gpio.h> #include <asm/mach-types.h> @@ -129,30 +129,29 @@ static void qong_init_nor_mtd(void) /* * Hardware specific access to control-lines */ -static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +static void qong_nand_cmd_ctrl(struct nand_chip *nand_chip, int cmd, + unsigned int ctrl) { - struct nand_chip *nand_chip = mtd_to_nand(mtd); - if (cmd == NAND_CMD_NONE) return; if (ctrl & NAND_CLE) - writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24)); + writeb(cmd, nand_chip->legacy.IO_ADDR_W + (1 << 24)); else - writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23)); + writeb(cmd, nand_chip->legacy.IO_ADDR_W + (1 << 23)); } /* * Read the Device Ready pin. */ -static int qong_nand_device_ready(struct mtd_info *mtd) +static int qong_nand_device_ready(struct nand_chip *chip) { return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB)); } -static void qong_nand_select_chip(struct mtd_info *mtd, int chip) +static void qong_nand_select_chip(struct nand_chip *chip, int cs) { - if (chip >= 0) + if (cs >= 0) gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0); else gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1); diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 772a7cf2010e..976ded5c5916 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -80,8 +80,6 @@ static unsigned int mmc_status(struct device *dev) static struct mmci_platform_data mmc_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .status = mmc_status, - .gpio_wp = -1, - .gpio_cd = -1, }; static u64 notrace intcp_read_sched_clock(void) diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 3ec829d52cdd..57d7df79d838 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -20,6 +20,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/platnand.h> #include <linux/delay.h> #include <linux/gpio.h> #include <asm/types.h> @@ -75,9 +76,8 @@ static struct mtd_partition ixdp425_partitions[] = { }; static void -ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +ixdp425_flash_nand_cmd_ctrl(struct nand_chip *this, int cmd, unsigned int ctrl) { - struct nand_chip *this = mtd_to_nand(mtd); int offset = (int)nand_get_controller_data(this); if (ctrl & NAND_CTRL_CHANGE) { @@ -93,7 +93,7 @@ ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) } if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W + offset); + writeb(cmd, this->legacy.IO_ADDR_W + offset); } static struct platform_nand_data ixdp425_flash_nand_data = { diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index d1613b954926..a04e249c654b 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio-pxa.h> +#include <linux/gpio/machine.h> #include <linux/regulator/machine.h> #include <linux/regulator/max8649.h> #include <linux/regulator/fixed.h> @@ -148,7 +149,6 @@ static struct regulator_init_data brownstone_v_5vp_data = { static struct fixed_voltage_config brownstone_v_5vp = { .supply_name = "v_5vp", .microvolts = 5000000, - .gpio = GPIO_5V_ENABLE, .enable_high = 1, .enabled_at_boot = 1, .init_data = &brownstone_v_5vp_data, @@ -162,6 +162,15 @@ static struct platform_device brownstone_v_5vp_device = { }, }; +static struct gpiod_lookup_table brownstone_v_5vp_gpiod_table = { + .dev_id = "reg-fixed-voltage.1", /* .id set to 1 above */ + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_5V_ENABLE, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct max8925_platform_data brownstone_max8925_info = { .irq_base = MMP_NR_IRQS, }; @@ -217,6 +226,7 @@ static void __init brownstone_init(void) mmp2_add_isram(&mmp2_isram_platdata); /* enable 5v regulator */ + gpiod_add_lookup_table(&brownstone_v_5vp_gpiod_table); platform_device_register(&brownstone_v_5vp_device); } diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index dd28d2614d7f..f226973f3d8c 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -300,7 +300,6 @@ static struct regulator_init_data modem_nreset_data = { static struct fixed_voltage_config modem_nreset_config = { .supply_name = "modem_nreset", .microvolts = 3300000, - .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, .startup_delay = 25000, .enable_high = 1, .enabled_at_boot = 1, @@ -315,6 +314,15 @@ static struct platform_device modem_nreset_device = { }, }; +static struct gpiod_lookup_table ams_delta_nreset_gpiod_table = { + .dev_id = "reg-fixed-voltage", + .table = { + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_NRESET, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + struct modem_private_data { struct regulator *regulator; }; @@ -568,7 +576,6 @@ static struct regulator_init_data keybrd_pwr_initdata = { static struct fixed_voltage_config keybrd_pwr_config = { .supply_name = "keybrd_pwr", .microvolts = 5000000, - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, .enable_high = 1, .init_data = &keybrd_pwr_initdata, }; @@ -602,6 +609,7 @@ static struct platform_device *ams_delta_devices[] __initdata = { }; static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = { + &ams_delta_nreset_gpiod_table, &ams_delta_audio_gpio_table, &keybrd_pwr_gpio_table, &ams_delta_lcd_gpio_table, diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 69bd601feb83..4a0a66815ca0 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -16,8 +16,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> +#include <linux/mtd/platnand.h> #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> @@ -186,7 +185,7 @@ static struct platform_device nor_device = { #define FSAMPLE_NAND_RB_GPIO_PIN 62 -static int nand_dev_ready(struct mtd_info *mtd) +static int nand_dev_ready(struct nand_chip *chip) { return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); } diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 9aeb8ad8c327..9d9a6ca15df0 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -24,8 +24,7 @@ #include <linux/delay.h> #include <linux/i2c.h> #include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> +#include <linux/mtd/platnand.h> #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/mfd/tps65010.h> @@ -182,7 +181,7 @@ static struct mtd_partition h2_nand_partitions[] = { #define H2_NAND_RB_GPIO_PIN 62 -static int h2_nand_dev_ready(struct mtd_info *mtd) +static int h2_nand_dev_ready(struct nand_chip *chip) { return gpio_get_value(H2_NAND_RB_GPIO_PIN); } diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 2edcd6356f2d..cd6e02c5c01a 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -23,7 +23,7 @@ #include <linux/workqueue.h> #include <linux/i2c.h> #include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> +#include <linux/mtd/platnand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/input.h> @@ -185,7 +185,7 @@ static struct mtd_partition nand_partitions[] = { #define H3_NAND_RB_GPIO_PIN 10 -static int nand_dev_ready(struct mtd_info *mtd) +static int nand_dev_ready(struct nand_chip *chip) { return gpio_get_value(H3_NAND_RB_GPIO_PIN); } diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c index 1bffbb4e050f..20923eb2d9b6 100644 --- a/arch/arm/mach-omap1/board-nand.c +++ b/arch/arm/mach-omap1/board-nand.c @@ -20,9 +20,8 @@ #include "common.h" -void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +void omap1_nand_cmd_ctl(struct nand_chip *this, int cmd, unsigned int ctrl) { - struct nand_chip *this = mtd_to_nand(mtd); unsigned long mask; if (cmd == NAND_CMD_NONE) @@ -32,6 +31,6 @@ void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) if (ctrl & NAND_ALE) mask |= 0x04; - writeb(cmd, this->IO_ADDR_W + mask); + writeb(cmd, this->legacy.IO_ADDR_W + mask); } diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index b4951eb82898..06a584fef5b8 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -16,8 +16,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> +#include <linux/mtd/platnand.h> #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> @@ -144,7 +143,7 @@ static struct platform_device nor_device = { #define P2_NAND_RB_GPIO_PIN 62 -static int nand_dev_ready(struct mtd_info *mtd) +static int nand_dev_ready(struct nand_chip *chip) { return gpio_get_value(P2_NAND_RB_GPIO_PIN); } diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index c6537d2c2859..504b959ba5cf 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -26,7 +26,6 @@ #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H #define __ARCH_ARM_MACH_OMAP1_COMMON_H -#include <linux/mtd/mtd.h> #include <linux/platform_data/i2c-omap.h> #include <linux/reboot.h> @@ -82,7 +81,8 @@ void omap1_restart(enum reboot_mode, const char *); extern void __init omap_check_revision(void); -extern void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, +struct nand_chip; +extern void omap1_nand_cmd_ctl(struct nand_chip *this, int cmd, unsigned int ctrl); extern void omap1_timer_init(void); diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index af9af5094ec3..bf99aec5a155 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -12,8 +12,6 @@ struct omap2_hsmmc_info { u8 mmc; /* controller 1/2/3 */ u32 caps; /* 4/8 wires and any additional host * capabilities OR'd (ref. linux/mmc/host.h) */ - int gpio_cd; /* or -EINVAL */ - int gpio_wp; /* or -EINVAL */ struct platform_device *pdev; /* mmc controller instance */ /* init some special card */ void (*init_card)(struct mmc_card *card); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2ceffd85dd3d..cd65ea4e9c54 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2161,6 +2161,37 @@ static int of_dev_hwmod_lookup(struct device_node *np, } /** + * omap_hwmod_fix_mpu_rt_idx - fix up mpu_rt_idx register offsets + * + * @oh: struct omap_hwmod * + * @np: struct device_node * + * + * Fix up module register offsets for modules with mpu_rt_idx. + * Only needed for cpsw with interconnect target module defined + * in device tree while still using legacy hwmod platform data + * for rev, sysc and syss registers. + * + * Can be removed when all cpsw hwmod platform data has been + * dropped. + */ +static void omap_hwmod_fix_mpu_rt_idx(struct omap_hwmod *oh, + struct device_node *np, + struct resource *res) +{ + struct device_node *child = NULL; + int error; + + child = of_get_next_child(np, child); + if (!child) + return; + + error = of_address_to_resource(child, oh->mpu_rt_idx, res); + if (error) + pr_err("%s: error mapping mpu_rt_idx: %i\n", + __func__, error); +} + +/** * omap_hwmod_parse_module_range - map module IO range from device tree * @oh: struct omap_hwmod * * @np: struct device_node * @@ -2220,7 +2251,13 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh, size = be32_to_cpup(ranges); pr_debug("omap_hwmod: %s %s at 0x%llx size 0x%llx\n", - oh->name, np->name, base, size); + oh ? oh->name : "", np->name, base, size); + + if (oh && oh->mpu_rt_idx) { + omap_hwmod_fix_mpu_rt_idx(oh, np, res); + + return 0; + } res->start = base; res->end = base + size - 1; diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 7f02743edbe4..9fec5f84bf77 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -10,6 +10,7 @@ #include <linux/clk.h> #include <linux/davinci_emac.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/of_platform.h> @@ -328,7 +329,6 @@ static struct regulator_init_data pandora_vmmc3 = { static struct fixed_voltage_config pandora_vwlan = { .supply_name = "vwlan", .microvolts = 1800000, /* 1.8V */ - .gpio = PANDORA_WIFI_NRESET_GPIO, .startup_delay = 50000, /* 50ms */ .enable_high = 1, .init_data = &pandora_vmmc3, @@ -342,6 +342,19 @@ static struct platform_device pandora_vwlan_device = { }, }; +static struct gpiod_lookup_table pandora_vwlan_gpiod_table = { + .dev_id = "reg-fixed-voltage.1", + .table = { + /* + * As this is a low GPIO number it should be at the first + * GPIO bank. + */ + GPIO_LOOKUP("gpio-0-31", PANDORA_WIFI_NRESET_GPIO, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void pandora_wl1251_init_card(struct mmc_card *card) { /* @@ -363,8 +376,6 @@ static struct omap2_hsmmc_info pandora_mmc3[] = { { .mmc = 3, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, .init_card = pandora_wl1251_init_card, }, {} /* Terminator */ @@ -403,6 +414,7 @@ fail: static void __init omap3_pandora_legacy_init(void) { platform_device_register(&pandora_backlight); + gpiod_add_lookup_table(&pandora_vwlan_gpiod_table); platform_device_register(&pandora_vwlan_device); omap_hsmmc_init(pandora_mmc3); omap_hsmmc_late_init(pandora_mmc3); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 2a1a4180d5d0..1298b53ac263 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -18,6 +18,7 @@ * published by the Free Software Foundation. */ +#include <linux/cpu_pm.h> #include <linux/suspend.h> #include <linux/sched.h> #include <linux/proc_fs.h> @@ -29,8 +30,6 @@ #include <linux/clk-provider.h> #include <linux/irq.h> #include <linux/time.h> -#include <linux/gpio.h> -#include <linux/platform_data/gpio-omap.h> #include <asm/fncpy.h> @@ -87,7 +86,7 @@ static int omap2_enter_full_retention(void) l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL; omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0); - omap2_gpio_prepare_for_idle(0); + cpu_cluster_pm_enter(); /* One last check for pending IRQs to avoid extra latency due * to sleeping unnecessarily. */ @@ -100,7 +99,7 @@ static int omap2_enter_full_retention(void) OMAP_SDRC_REGADDR(SDRC_POWER)); no_sleep: - omap2_gpio_resume_after_idle(); + cpu_cluster_pm_exit(); clk_enable(osc_ck); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 36c55547137c..1a90050361f1 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -18,19 +18,18 @@ * published by the Free Software Foundation. */ +#include <linux/cpu_pm.h> #include <linux/pm.h> #include <linux/suspend.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/list.h> #include <linux/err.h> -#include <linux/gpio.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/slab.h> #include <linux/omap-dma.h> #include <linux/omap-gpmc.h> -#include <linux/platform_data/gpio-omap.h> #include <trace/events/power.h> @@ -197,7 +196,6 @@ void omap_sram_idle(void) int mpu_next_state = PWRDM_POWER_ON; int per_next_state = PWRDM_POWER_ON; int core_next_state = PWRDM_POWER_ON; - int per_going_off; u32 sdrc_pwr = 0; mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); @@ -227,10 +225,8 @@ void omap_sram_idle(void) pwrdm_pre_transition(NULL); /* PER */ - if (per_next_state < PWRDM_POWER_ON) { - per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; - omap2_gpio_prepare_for_idle(per_going_off); - } + if (per_next_state == PWRDM_POWER_OFF) + cpu_cluster_pm_enter(); /* CORE */ if (core_next_state < PWRDM_POWER_ON) { @@ -295,8 +291,8 @@ void omap_sram_idle(void) pwrdm_post_transition(NULL); /* PER */ - if (per_next_state < PWRDM_POWER_ON) - omap2_gpio_resume_after_idle(); + if (per_next_state == PWRDM_POWER_OFF) + cpu_cluster_pm_exit(); } static void omap3_pm_idle(void) diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 94778739e38f..fda9b75c3a33 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -16,8 +16,7 @@ #include <linux/platform_device.h> #include <linux/mv643xx_eth.h> #include <linux/ata_platform.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> +#include <linux/mtd/platnand.h> #include <linux/timeriomem-rng.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -131,11 +130,9 @@ static void ts78xx_ts_rtc_unload(void) * NAND_CLE: bit 1 -> bit 1 * NAND_ALE: bit 2 -> bit 0 */ -static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, - unsigned int ctrl) +static void ts78xx_ts_nand_cmd_ctrl(struct nand_chip *this, int cmd, + unsigned int ctrl) { - struct nand_chip *this = mtd_to_nand(mtd); - if (ctrl & NAND_CTRL_CHANGE) { unsigned char bits; @@ -147,19 +144,18 @@ static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, } if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); + writeb(cmd, this->legacy.IO_ADDR_W); } -static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd) +static int ts78xx_ts_nand_dev_ready(struct nand_chip *chip) { return readb(TS_NAND_CTRL) & 0x20; } -static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd, - const uint8_t *buf, int len) +static void ts78xx_ts_nand_write_buf(struct nand_chip *chip, + const uint8_t *buf, int len) { - struct nand_chip *chip = mtd_to_nand(mtd); - void __iomem *io_base = chip->IO_ADDR_W; + void __iomem *io_base = chip->legacy.IO_ADDR_W; unsigned long off = ((unsigned long)buf & 3); int sz; @@ -182,11 +178,10 @@ static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd, writesb(io_base, buf, len); } -static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd, - uint8_t *buf, int len) +static void ts78xx_ts_nand_read_buf(struct nand_chip *chip, + uint8_t *buf, int len) { - struct nand_chip *chip = mtd_to_nand(mtd); - void __iomem *io_base = chip->IO_ADDR_R; + void __iomem *io_base = chip->legacy.IO_ADDR_R; unsigned long off = ((unsigned long)buf & 3); int sz; diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index af46d2182533..c52c081eb6d9 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -25,11 +25,10 @@ #include <linux/ioport.h> #include <linux/ucb1400.h> #include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> #include <linux/types.h> #include <linux/platform_data/pcf857x.h> #include <linux/platform_data/i2c-pxa.h> -#include <linux/mtd/rawnand.h> +#include <linux/mtd/platnand.h> #include <linux/mtd/physmap.h> #include <linux/regulator/max1586.h> @@ -571,9 +570,9 @@ static inline void balloon3_i2c_init(void) {} * NAND ******************************************************************************/ #if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +static void balloon3_nand_cmd_ctl(struct nand_chip *this, int cmd, + unsigned int ctrl) { - struct nand_chip *this = mtd_to_nand(mtd); uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0; if (ctrl & NAND_CTRL_CHANGE) { @@ -597,10 +596,10 @@ static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ct } if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); + writeb(cmd, this->legacy.IO_ADDR_W); } -static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip) +static void balloon3_nand_select_chip(struct nand_chip *this, int chip) { if (chip < 0 || chip > 3) return; @@ -616,7 +615,7 @@ static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip) BALLOON3_NAND_CONTROL_REG); } -static int balloon3_nand_dev_ready(struct mtd_info *mtd) +static int balloon3_nand_dev_ready(struct nand_chip *this) { return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB; } diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 29be04c6cc48..67e37df637f5 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -15,8 +15,7 @@ #include <linux/dm9000.h> #include <linux/platform_data/rtc-v3020.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> +#include <linux/mtd/platnand.h> #include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/gpio_keys.h> @@ -285,11 +284,10 @@ static void nand_cs_off(void) } /* hardware specific access to control-lines */ -static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat, +static void em_x270_nand_cmd_ctl(struct nand_chip *this, int dat, unsigned int ctrl) { - struct nand_chip *this = mtd_to_nand(mtd); - unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; + unsigned long nandaddr = (unsigned long)this->legacy.IO_ADDR_W; dsb(); @@ -309,15 +307,15 @@ static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat, } dsb(); - this->IO_ADDR_W = (void __iomem *)nandaddr; + this->legacy.IO_ADDR_W = (void __iomem *)nandaddr; if (dat != NAND_CMD_NONE) - writel(dat, this->IO_ADDR_W); + writel(dat, this->legacy.IO_ADDR_W); dsb(); } /* read device ready pin */ -static int em_x270_nand_device_ready(struct mtd_info *mtd) +static int em_x270_nand_device_ready(struct nand_chip *this) { dsb(); @@ -986,7 +984,6 @@ static struct fixed_voltage_config camera_dummy_config = { .supply_name = "camera_vdd", .input_supply = "vcc cam", .microvolts = 2800000, - .gpio = -1, .enable_high = 0, .init_data = &camera_dummy_initdata, }; diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 2c90b58f347d..565965e9acc7 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -21,6 +21,7 @@ #include <linux/regulator/fixed.h> #include <linux/input.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/gpio_keys.h> #include <linux/leds-lp3944.h> #include <linux/platform_data/i2c-pxa.h> @@ -698,31 +699,39 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = { #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910) /* camera */ -static struct regulator_consumer_supply camera_dummy_supplies[] = { +static struct regulator_consumer_supply camera_regulator_supplies[] = { REGULATOR_SUPPLY("vdd", "0-005d"), }; -static struct regulator_init_data camera_dummy_initdata = { - .consumer_supplies = camera_dummy_supplies, - .num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies), +static struct regulator_init_data camera_regulator_initdata = { + .consumer_supplies = camera_regulator_supplies, + .num_consumer_supplies = ARRAY_SIZE(camera_regulator_supplies), .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, }; -static struct fixed_voltage_config camera_dummy_config = { +static struct fixed_voltage_config camera_regulator_config = { .supply_name = "camera_vdd", .microvolts = 2800000, - .gpio = GPIO50_nCAM_EN, .enable_high = 0, - .init_data = &camera_dummy_initdata, + .init_data = &camera_regulator_initdata, }; -static struct platform_device camera_supply_dummy_device = { +static struct platform_device camera_supply_regulator_device = { .name = "reg-fixed-voltage", .id = 1, .dev = { - .platform_data = &camera_dummy_config, + .platform_data = &camera_regulator_config, + }, +}; + +static struct gpiod_lookup_table camera_supply_gpiod_table = { + .dev_id = "reg-fixed-voltage.1", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN, + NULL, GPIO_ACTIVE_HIGH), + { }, }, }; #endif @@ -800,7 +809,7 @@ static struct i2c_board_info a780_i2c_board_info[] = { static struct platform_device *a780_devices[] __initdata = { &a780_gpio_keys, - &camera_supply_dummy_device, + &camera_supply_regulator_device, }; static void __init a780_init(void) @@ -823,6 +832,7 @@ static void __init a780_init(void) if (a780_camera_init() == 0) pxa_set_camera_info(&a780_pxacamera_platform_data); + gpiod_add_lookup_table(&camera_supply_gpiod_table); pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(a780_devices)); @@ -1098,7 +1108,7 @@ static struct i2c_board_info __initdata a910_i2c_board_info[] = { static struct platform_device *a910_devices[] __initdata = { &a910_gpio_keys, - &camera_supply_dummy_device, + &camera_supply_regulator_device, }; static void __init a910_init(void) @@ -1121,6 +1131,7 @@ static void __init a910_init(void) if (a910_camera_init() == 0) pxa_set_camera_info(&a910_pxacamera_platform_data); + gpiod_add_lookup_table(&camera_supply_gpiod_table); pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(a910_devices)); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index c5325d1ae77b..14c0f80bc9e7 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/mfd/htc-pasic3.h> @@ -696,7 +697,6 @@ static struct regulator_init_data vads7846_regulator = { static struct fixed_voltage_config vads7846 = { .supply_name = "vads7846", .microvolts = 3300000, /* probably */ - .gpio = -EINVAL, .startup_delay = 0, .init_data = &vads7846_regulator, }; diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 4cc05ecce618..b66b0b11d717 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -404,36 +404,6 @@ static void __init palmtreo_leds_init(void) } /****************************************************************************** - * diskonchip docg4 flash - ******************************************************************************/ -#if defined(CONFIG_MACH_TREO680) -/* REVISIT: does the centro have this device also? */ -#if IS_ENABLED(CONFIG_MTD_NAND_DOCG4) -static struct resource docg4_resources[] = { - { - .start = 0x00000000, - .end = 0x00001FFF, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device treo680_docg4_flash = { - .name = "docg4", - .id = -1, - .resource = docg4_resources, - .num_resources = ARRAY_SIZE(docg4_resources), -}; - -static void __init treo680_docg4_flash_init(void) -{ - platform_device_register(&treo680_docg4_flash); -} -#else -static inline void treo680_docg4_flash_init(void) {} -#endif -#endif - -/****************************************************************************** * Machine init ******************************************************************************/ static void __init treo_reserve(void) @@ -517,7 +487,6 @@ static void __init treo680_init(void) treo680_gpio_init(); palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY, GPIO_NR_TREO680_SD_POWER, 0); - treo680_docg4_flash_init(); } #endif diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 47e3e38e9bec..1d06a8e91d8f 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -28,8 +28,7 @@ #include <linux/wm97xx.h> #include <linux/power_supply.h> #include <linux/usb/gpio_vbus.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> +#include <linux/mtd/platnand.h> #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> @@ -247,11 +246,10 @@ static inline void palmtx_keys_init(void) {} ******************************************************************************/ #if defined(CONFIG_MTD_NAND_PLATFORM) || \ defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd, - unsigned int ctrl) +static void palmtx_nand_cmd_ctl(struct nand_chip *this, int cmd, + unsigned int ctrl) { - struct nand_chip *this = mtd_to_nand(mtd); - char __iomem *nandaddr = this->IO_ADDR_W; + char __iomem *nandaddr = this->legacy.IO_ADDR_W; if (cmd == NAND_CMD_NONE) return; diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 034345546f84..bd3c23ad6ce6 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -886,7 +886,6 @@ static struct regulator_init_data audio_va_initdata = { static struct fixed_voltage_config audio_va_config = { .supply_name = "audio_va", .microvolts = 5000000, - .gpio = GPIO_AUDIO_VA_ENABLE, .enable_high = 1, .enabled_at_boot = 0, .init_data = &audio_va_initdata, @@ -900,6 +899,15 @@ static struct platform_device audio_va_device = { }, }; +static struct gpiod_lookup_table audio_va_gpiod_table = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_AUDIO_VA_ENABLE, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* Dummy supplies for Codec's VD/VLC */ static struct regulator_consumer_supply audio_dummy_supplies[] = { @@ -918,7 +926,6 @@ static struct regulator_init_data audio_dummy_initdata = { static struct fixed_voltage_config audio_dummy_config = { .supply_name = "audio_vd", .microvolts = 3300000, - .gpio = -1, .init_data = &audio_dummy_initdata, }; @@ -1033,6 +1040,7 @@ static void __init raumfeld_audio_init(void) else gpio_direction_output(GPIO_MCLK_RESET, 1); + gpiod_add_lookup_table(&audio_va_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices)); } diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index e3851795d6d7..d53ea12fc766 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -17,6 +17,7 @@ #include <linux/irq.h> #include <linux/pm.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/serial_8250.h> #include <linux/dm9000.h> #include <linux/mmc/host.h> @@ -410,7 +411,6 @@ static struct regulator_init_data can_regulator_init_data = { static struct fixed_voltage_config can_regulator_pdata = { .supply_name = "CAN_SHDN", .microvolts = 3300000, - .gpio = ZEUS_CAN_SHDN_GPIO, .init_data = &can_regulator_init_data, }; @@ -422,6 +422,15 @@ static struct platform_device can_regulator_device = { }, }; +static struct gpiod_lookup_table can_regulator_gpiod_table = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("gpio-pxa", ZEUS_CAN_SHDN_GPIO, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct mcp251x_platform_data zeus_mcp2515_pdata = { .oscillator_frequency = 16*1000*1000, }; @@ -538,7 +547,6 @@ static struct regulator_init_data zeus_ohci_regulator_data = { static struct fixed_voltage_config zeus_ohci_regulator_config = { .supply_name = "vbus2", .microvolts = 5000000, /* 5.0V */ - .gpio = ZEUS_USB2_PWREN_GPIO, .enable_high = 1, .startup_delay = 0, .init_data = &zeus_ohci_regulator_data, @@ -552,6 +560,15 @@ static struct platform_device zeus_ohci_regulator_device = { }, }; +static struct gpiod_lookup_table zeus_ohci_regulator_gpiod_table = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("gpio-pxa", ZEUS_USB2_PWREN_GPIO, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct pxaohci_platform_data zeus_ohci_platform_data = { .port_mode = PMM_NPS_MODE, /* Clear Power Control Polarity Low and set Power Sense @@ -855,6 +872,8 @@ static void __init zeus_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config)); + gpiod_add_lookup_table(&can_regulator_gpiod_table); + gpiod_add_lookup_table(&zeus_ohci_regulator_gpiod_table); platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices)); zeus_register_ohci(); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index f04650297487..379424d72ae7 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -352,7 +352,6 @@ static struct fixed_voltage_config wallvdd_pdata = { .supply_name = "WALLVDD", .microvolts = 5000000, .init_data = &wallvdd_data, - .gpio = -EINVAL, }; static struct platform_device wallvdd_device = { diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index c46fa5dfd2e0..908e5aa831c8 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -222,7 +222,6 @@ static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = { .supply_name = "B_PWR_5V", .microvolts = 5000000, .init_data = &smdk6410_b_pwr_5v_data, - .gpio = -EINVAL, }; static struct platform_device smdk6410_b_pwr_5v = { diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 575ec085cffa..3e8c0948abcc 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -101,7 +101,7 @@ static int __init assabet_init_gpio(void __iomem *reg, u32 def_val) assabet_bcr_gc = gc; - return gc->base; + return 0; } /* @@ -471,6 +471,14 @@ static struct fixed_voltage_config assabet_cf_vcc_pdata __initdata = { .enable_high = 1, }; +static struct gpiod_lookup_table assabet_cf_vcc_gpio_table = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("assabet", 0, NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init assabet_init(void) { /* @@ -517,9 +525,11 @@ static void __init assabet_init(void) neponset_resources, ARRAY_SIZE(neponset_resources)); #endif } else { + gpiod_add_lookup_table(&assabet_cf_vcc_gpio_table); sa11x0_register_fixed_regulator(0, &assabet_cf_vcc_pdata, - assabet_cf_vcc_consumers, - ARRAY_SIZE(assabet_cf_vcc_consumers)); + assabet_cf_vcc_consumers, + ARRAY_SIZE(assabet_cf_vcc_consumers), + true); } @@ -802,7 +812,6 @@ fs_initcall(assabet_leds_init); void __init assabet_init_irq(void) { - unsigned int assabet_gpio_base; u32 def_val; sa1100_init_irq(); @@ -817,9 +826,7 @@ void __init assabet_init_irq(void) * * This must precede any driver calls to BCR_set() or BCR_clear(). */ - assabet_gpio_base = assabet_init_gpio((void *)&ASSABET_BCR, def_val); - - assabet_cf_vcc_pdata.gpio = assabet_gpio_base + 0; + assabet_init_gpio((void *)&ASSABET_BCR, def_val); } MACHINE_START(ASSABET, "Intel-Assabet") diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 7167ddf84a0e..800321c6cbd8 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -348,7 +348,8 @@ void __init sa11x0_init_late(void) int __init sa11x0_register_fixed_regulator(int n, struct fixed_voltage_config *cfg, - struct regulator_consumer_supply *supplies, unsigned num_supplies) + struct regulator_consumer_supply *supplies, unsigned num_supplies, + bool uses_gpio) { struct regulator_init_data *id; @@ -356,7 +357,7 @@ int __init sa11x0_register_fixed_regulator(int n, if (!cfg->init_data) return -ENOMEM; - if (cfg->gpio < 0) + if (!uses_gpio) id->constraints.always_on = 1; id->constraints.name = cfg->supply_name; id->constraints.min_uV = cfg->microvolts; diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index 5f3cb52fa6ab..158a4fd5ca24 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -54,4 +54,5 @@ void sa11x0_register_pcmcia(int socket, struct gpiod_lookup_table *); struct fixed_voltage_config; struct regulator_consumer_supply; int sa11x0_register_fixed_regulator(int n, struct fixed_voltage_config *cfg, - struct regulator_consumer_supply *supplies, unsigned num_supplies); + struct regulator_consumer_supply *supplies, unsigned num_supplies, + bool uses_gpio); diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 22f7fe0b809f..5bc82e2671c6 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -102,14 +102,14 @@ static struct fixed_voltage_config shannon_cf_vcc_pdata __initdata = { .supply_name = "cf-power", .microvolts = 3300000, .enabled_at_boot = 1, - .gpio = -EINVAL, }; static void __init shannon_init(void) { sa11x0_register_fixed_regulator(0, &shannon_cf_vcc_pdata, shannon_cf_vcc_consumers, - ARRAY_SIZE(shannon_cf_vcc_consumers)); + ARRAY_SIZE(shannon_cf_vcc_consumers), + false); sa11x0_register_pcmcia(0, &shannon_pcmcia0_gpio_table); sa11x0_register_pcmcia(1, &shannon_pcmcia1_gpio_table); sa11x0_ppc_configure_mcp(); diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index 3c8d39c12909..e9d60687e416 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -89,15 +89,11 @@ unsigned int mmc_status(struct device *dev) static struct mmci_platform_data mmc0_plat_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .status = mmc_status, - .gpio_wp = -1, - .gpio_cd = -1, }; static struct mmci_platform_data mmc1_plat_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .status = mmc_status, - .gpio_wp = -1, - .gpio_cd = -1, }; /* diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index bd2c739d8083..b54f8f8def36 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -948,15 +948,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) goto fixup; if (ai_usermode & UM_SIGNAL) { - siginfo_t si; - - clear_siginfo(&si); - si.si_signo = SIGBUS; - si.si_errno = 0; - si.si_code = BUS_ADRALN; - si.si_addr = (void __user *)addr; - - force_sig_info(si.si_signo, &si, current); + force_sig_fault(SIGBUS, BUS_ADRALN, (void __user *)addr, current); } else { /* * We're about to disable the alignment trap and return to diff --git a/arch/arm/mm/dma-mapping-nommu.c b/arch/arm/mm/dma-mapping-nommu.c index f448a0663b10..712416ecd8e6 100644 --- a/arch/arm/mm/dma-mapping-nommu.c +++ b/arch/arm/mm/dma-mapping-nommu.c @@ -47,7 +47,8 @@ static void *arm_nommu_dma_alloc(struct device *dev, size_t size, */ if (attrs & DMA_ATTR_NON_CONSISTENT) - return dma_direct_alloc(dev, size, dma_handle, gfp, attrs); + return dma_direct_alloc_pages(dev, size, dma_handle, gfp, + attrs); ret = dma_alloc_from_global_coherent(size, dma_handle); @@ -70,7 +71,7 @@ static void arm_nommu_dma_free(struct device *dev, size_t size, unsigned long attrs) { if (attrs & DMA_ATTR_NON_CONSISTENT) { - dma_direct_free(dev, size, cpu_addr, dma_addr, attrs); + dma_direct_free_pages(dev, size, cpu_addr, dma_addr, attrs); } else { int ret = dma_release_from_global_coherent(get_order(size), cpu_addr); @@ -90,7 +91,7 @@ static int arm_nommu_dma_mmap(struct device *dev, struct vm_area_struct *vma, if (dma_mmap_from_global_coherent(vma, cpu_addr, size, &ret)) return ret; - return dma_common_mmap(dev, vma, cpu_addr, dma_addr, size); + return dma_common_mmap(dev, vma, cpu_addr, dma_addr, size, attrs); } @@ -237,7 +238,3 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, set_dma_ops(dev, dma_ops); } - -void arch_teardown_dma_ops(struct device *dev) -{ -} diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 3232afb6fdc0..f4ea4c62c613 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -161,13 +161,9 @@ __do_user_fault(struct task_struct *tsk, unsigned long addr, unsigned int fsr, unsigned int sig, int code, struct pt_regs *regs) { - struct siginfo si; - if (addr > TASK_SIZE) harden_branch_predictor(); - clear_siginfo(&si); - #ifdef CONFIG_DEBUG_USER if (((user_debug & UDBG_SEGV) && (sig == SIGSEGV)) || ((user_debug & UDBG_BUS) && (sig == SIGBUS))) { @@ -181,11 +177,7 @@ __do_user_fault(struct task_struct *tsk, unsigned long addr, tsk->thread.address = addr; tsk->thread.error_code = fsr; tsk->thread.trap_no = 14; - si.si_signo = sig; - si.si_errno = 0; - si.si_code = code; - si.si_addr = (void __user *)addr; - force_sig_info(sig, &si, tsk); + force_sig_fault(sig, code, (void __user *)addr, tsk); } void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -554,7 +546,6 @@ asmlinkage void do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { const struct fsr_info *inf = fsr_info + fsr_fs(fsr); - struct siginfo info; if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs)) return; @@ -563,12 +554,8 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) inf->name, fsr, addr); show_pte(current->mm, addr); - clear_siginfo(&info); - info.si_signo = inf->sig; - info.si_errno = 0; - info.si_code = inf->code; - info.si_addr = (void __user *)addr; - arm_notify_die("", regs, &info, fsr, 0); + arm_notify_die("", regs, inf->sig, inf->code, (void __user *)addr, + fsr, 0); } void __init @@ -588,7 +575,6 @@ asmlinkage void do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs) { const struct fsr_info *inf = ifsr_info + fsr_fs(ifsr); - struct siginfo info; if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs)) return; @@ -596,12 +582,8 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs) pr_alert("Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n", inf->name, ifsr, addr); - clear_siginfo(&info); - info.si_signo = inf->sig; - info.si_errno = 0; - info.si_code = inf->code; - info.si_addr = (void __user *)addr; - arm_notify_die("", regs, &info, ifsr, 0); + arm_notify_die("", regs, inf->sig, inf->code, (void __user *)addr, + ifsr, 0); } /* diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index fc91205ff46c..5bf9443cfbaa 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -473,7 +473,7 @@ void pci_ioremap_set_mem_type(int mem_type) int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr) { - BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT); + BUG_ON(offset + SZ_64K - 1 > IO_SPACE_LIMIT); return ioremap_page_range(PCI_IO_VIRT_BASE + offset, PCI_IO_VIRT_BASE + offset + SZ_64K, diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl index fbc74b5fa3ed..8edf93b4490f 100644 --- a/arch/arm/tools/syscall.tbl +++ b/arch/arm/tools/syscall.tbl @@ -413,3 +413,4 @@ 396 common pkey_free sys_pkey_free 397 common statx sys_statx 398 common rseq sys_rseq +399 common io_pgetevents sys_io_pgetevents diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index dc7e6b50ef67..aff6e6eadc70 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -216,13 +216,6 @@ static struct notifier_block vfp_notifier_block = { */ static void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) { - siginfo_t info; - - clear_siginfo(&info); - info.si_signo = SIGFPE; - info.si_code = sicode; - info.si_addr = (void __user *)(instruction_pointer(regs) - 4); - /* * This is the same as NWFPE, because it's not clear what * this is used for @@ -230,7 +223,9 @@ static void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) current->thread.error_code = 0; current->thread.trap_no = 6; - send_sig_info(SIGFPE, &info, current); + send_sig_fault(SIGFPE, sicode, + (void __user *)(instruction_pointer(regs) - 4), + current); } static void vfp_panic(char *reason, u32 inst) @@ -553,12 +548,11 @@ void vfp_flush_hwstate(struct thread_info *thread) * Save the current VFP state into the provided structures and prepare * for entry into a new function (signal handler). */ -int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp, - struct user_vfp_exc __user *ufp_exc) +int vfp_preserve_user_clear_hwstate(struct user_vfp *ufp, + struct user_vfp_exc *ufp_exc) { struct thread_info *thread = current_thread_info(); struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; - int err = 0; /* Ensure that the saved hwstate is up-to-date. */ vfp_sync_hwstate(thread); @@ -567,22 +561,19 @@ int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp, * Copy the floating point registers. There can be unused * registers see asm/hwcap.h for details. */ - err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs, - sizeof(hwstate->fpregs)); + memcpy(&ufp->fpregs, &hwstate->fpregs, sizeof(hwstate->fpregs)); + /* * Copy the status and control register. */ - __put_user_error(hwstate->fpscr, &ufp->fpscr, err); + ufp->fpscr = hwstate->fpscr; /* * Copy the exception registers. */ - __put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err); - __put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); - __put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err); - - if (err) - return -EFAULT; + ufp_exc->fpexc = hwstate->fpexc; + ufp_exc->fpinst = hwstate->fpinst; + ufp_exc->fpinst2 = ufp_exc->fpinst2; /* Ensure that VFP is disabled. */ vfp_flush_hwstate(thread); diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 07060e5b5864..17e478928276 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -62,29 +62,6 @@ static __read_mostly unsigned int xen_events_irq; uint32_t xen_start_flags; EXPORT_SYMBOL(xen_start_flags); -int xen_remap_domain_gfn_array(struct vm_area_struct *vma, - unsigned long addr, - xen_pfn_t *gfn, int nr, - int *err_ptr, pgprot_t prot, - unsigned domid, - struct page **pages) -{ - return xen_xlate_remap_gfn_array(vma, addr, gfn, nr, err_ptr, - prot, domid, pages); -} -EXPORT_SYMBOL_GPL(xen_remap_domain_gfn_array); - -/* Not used by XENFEAT_auto_translated guests. */ -int xen_remap_domain_gfn_range(struct vm_area_struct *vma, - unsigned long addr, - xen_pfn_t gfn, int nr, - pgprot_t prot, unsigned domid, - struct page **pages) -{ - return -ENOSYS; -} -EXPORT_SYMBOL_GPL(xen_remap_domain_gfn_range); - int xen_unmap_domain_gfn_range(struct vm_area_struct *vma, int nr, struct page **pages) { @@ -92,17 +69,6 @@ int xen_unmap_domain_gfn_range(struct vm_area_struct *vma, } EXPORT_SYMBOL_GPL(xen_unmap_domain_gfn_range); -/* Not used by XENFEAT_auto_translated guests. */ -int xen_remap_domain_mfn_array(struct vm_area_struct *vma, - unsigned long addr, - xen_pfn_t *mfn, int nr, - int *err_ptr, pgprot_t prot, - unsigned int domid, struct page **pages) -{ - return -ENOSYS; -} -EXPORT_SYMBOL_GPL(xen_remap_domain_mfn_array); - static void xen_read_wallclock(struct timespec64 *ts) { u32 version; |