diff options
Diffstat (limited to 'arch/arm')
54 files changed, 478 insertions, 208 deletions
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index 6c667fb35449..4e28d87e9356 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -470,9 +470,12 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; phy-mode = "rmii"; dual_emac_res_vlan = <1>; + fixed-link { + speed = <100>; + full-duplex; + }; }; &cpsw_emac1 { diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 55ca9c7dcf6a..0467846b4cc3 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -860,7 +860,7 @@ ti,no-idle-on-init; reg = <0x50000000 0x2000>; interrupts = <100>; - dmas = <&edma 52>; + dmas = <&edma 52 0>; dma-names = "rxtx"; gpmc,num-cs = <7>; gpmc,num-waitpins = <2>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 6e4f5af3d8f8..ba580a9da390 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -207,7 +207,7 @@ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, <&edma_tptc2 0>; - ti,edma-memcpy-channels = <32 33>; + ti,edma-memcpy-channels = <58 59>; }; edma_tptc0: tptc@49800000 { @@ -884,7 +884,7 @@ gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; - dmas = <&edma 52>; + dmas = <&edma 52 0>; dma-names = "rxtx"; clocks = <&l3s_gclk>; clock-names = "fck"; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 83dfafaaba1b..d5dd72047a7e 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -794,3 +794,8 @@ tx-num-evt = <32>; rx-num-evt = <32>; }; + +&synctimer_32kclk { + assigned-clocks = <&mux_synctimer32k_ck>; + assigned-clock-parents = <&clkdiv32k_ick>; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 0a5fc5d02ce2..4168eb9dd369 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -99,13 +99,6 @@ #cooling-cells = <2>; }; - extcon_usb1: extcon_usb1 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&extcon_usb1_pins>; - }; - hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -349,12 +342,6 @@ >; }; - extcon_usb1_pins: extcon_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ - >; - }; - tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ @@ -706,10 +693,6 @@ pinctrl-0 = <&usb1_pins>; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - &omap_dwc3_2 { extcon = <&extcon_usb2>; }; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 3710755c6d76..85d2c377c332 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -117,7 +117,7 @@ }; /* USB part of the eSATA/USB 2.0 port */ - usb@50000 { + usb@58000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi index e0ea6a93a22e..792a64ee0df7 100644 --- a/arch/arm/boot/dts/dm814x-clocks.dtsi +++ b/arch/arm/boot/dts/dm814x-clocks.dtsi @@ -4,6 +4,157 @@ * published by the Free Software Foundation. */ +&pllss { + /* + * See TRM "2.6.10 Connected outputso DPLLS" and + * "2.6.11 Connected Outputs of DPLLJ". Only clkout is + * connected except for hdmi and usb. + */ + adpll_mpu_ck: adpll@40 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-s-clock"; + reg = <0x40 0x40>; + clocks = <&devosc_ck &devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow", "clkinphif"; + clock-output-names = "481c5040.adpll.dcoclkldo", + "481c5040.adpll.clkout", + "481c5040.adpll.clkoutx2", + "481c5040.adpll.clkouthif"; + }; + + adpll_dsp_ck: adpll@80 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x80 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5080.adpll.dcoclkldo", + "481c5080.adpll.clkout", + "481c5080.adpll.clkoutldo"; + }; + + adpll_sgx_ck: adpll@b0 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0xb0 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c50b0.adpll.dcoclkldo", + "481c50b0.adpll.clkout", + "481c50b0.adpll.clkoutldo"; + }; + + adpll_hdvic_ck: adpll@e0 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0xe0 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c50e0.adpll.dcoclkldo", + "481c50e0.adpll.clkout", + "481c50e0.adpll.clkoutldo"; + }; + + adpll_l3_ck: adpll@110 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x110 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5110.adpll.dcoclkldo", + "481c5110.adpll.clkout", + "481c5110.adpll.clkoutldo"; + }; + + adpll_isp_ck: adpll@140 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x140 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5140.adpll.dcoclkldo", + "481c5140.adpll.clkout", + "481c5140.adpll.clkoutldo"; + }; + + adpll_dss_ck: adpll@170 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x170 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5170.adpll.dcoclkldo", + "481c5170.adpll.clkout", + "481c5170.adpll.clkoutldo"; + }; + + adpll_video0_ck: adpll@1a0 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x1a0 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c51a0.adpll.dcoclkldo", + "481c51a0.adpll.clkout", + "481c51a0.adpll.clkoutldo"; + }; + + adpll_video1_ck: adpll@1d0 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x1d0 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c51d0.adpll.dcoclkldo", + "481c51d0.adpll.clkout", + "481c51d0.adpll.clkoutldo"; + }; + + adpll_hdmi_ck: adpll@200 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x200 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5200.adpll.dcoclkldo", + "481c5200.adpll.clkout", + "481c5200.adpll.clkoutldo"; + }; + + adpll_audio_ck: adpll@230 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x230 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5230.adpll.dcoclkldo", + "481c5230.adpll.clkout", + "481c5230.adpll.clkoutldo"; + }; + + adpll_usb_ck: adpll@260 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x260 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5260.adpll.dcoclkldo", + "481c5260.adpll.clkout", + "481c5260.adpll.clkoutldo"; + }; + + adpll_ddr_ck: adpll@290 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x290 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5290.adpll.dcoclkldo", + "481c5290.adpll.clkout", + "481c5290.adpll.clkoutldo"; + }; +}; + &pllss_clocks { timer1_fck: timer1_fck { #clock-cells = <0>; @@ -23,6 +174,24 @@ reg = <0x2e0>; }; + /* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */ + cpsw_cpts_rft_clk: cpsw_cpts_rft_clk { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&adpll_video0_ck 1 + &adpll_video1_ck 1 + &adpll_audio_ck 1>; + ti,bit-shift = <1>; + reg = <0x2e8>; + }; + + /* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */ + cpsw_125mhz_gclk: cpsw_125mhz_gclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + }; + sysclk18_ck: sysclk18_ck { #clock-cells = <0>; compatible = "ti,mux-clock"; @@ -79,37 +248,6 @@ compatible = "fixed-clock"; clock-frequency = <1000000000>; }; - - sysclk4_ck: sysclk4_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <222000000>; - }; - - sysclk6_ck: sysclk6_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - }; - - sysclk10_ck: sysclk10_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <48000000>; - }; - - cpsw_125mhz_gclk: cpsw_125mhz_gclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <125000000>; - }; - - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <250000000>; - }; - }; &prcm_clocks { @@ -138,6 +276,49 @@ clock-div = <78125>; }; + /* L4_HS 220 MHz*/ + sysclk4_ck: sysclk4_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&adpll_l3_ck 1>; + ti,clock-mult = <1>; + ti,clock-div = <1>; + }; + + /* L4_FWCFG */ + sysclk5_ck: sysclk5_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&adpll_l3_ck 1>; + ti,clock-mult = <1>; + ti,clock-div = <2>; + }; + + /* L4_LS 110 MHz */ + sysclk6_ck: sysclk6_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&adpll_l3_ck 1>; + ti,clock-mult = <1>; + ti,clock-div = <2>; + }; + + sysclk8_ck: sysclk8_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&adpll_usb_ck 1>; + ti,clock-mult = <1>; + ti,clock-div = <1>; + }; + + sysclk10_ck: sysclk10_ck { + compatible = "ti,divider-clock"; + reg = <0x324>; + ti,max-div = <7>; + #clock-cells = <0>; + clocks = <&adpll_usb_ck 1>; + }; + aud_clkin0_ck: aud_clkin0_ck { #clock-cells = <0>; compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/dra62x-clocks.dtsi b/arch/arm/boot/dts/dra62x-clocks.dtsi index 6f98dc8df9dd..0e49741747ef 100644 --- a/arch/arm/boot/dts/dra62x-clocks.dtsi +++ b/arch/arm/boot/dts/dra62x-clocks.dtsi @@ -6,6 +6,32 @@ #include "dm814x-clocks.dtsi" +/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */ +&adpll_hdvic_ck { + status = "disabled"; +}; + +&adpll_l3_ck { + status = "disabled"; +}; + +&adpll_dss_ck { + status = "disabled"; +}; + +/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */ +&sysclk4_ck { + clocks = <&adpll_isp_ck 1>; +}; + +&sysclk5_ck { + clocks = <&adpll_isp_ck 1>; +}; + +&sysclk6_ck { + clocks = <&adpll_isp_ck 1>; +}; + /* * Compared to dm814x, dra62x has different shifts and more mux options. * Please add the extra options for ysclk_14 and 16 if really needed. diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index d0bae06b7eb7..ef2164a99d0f 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -98,12 +98,20 @@ clock-frequency = <32768>; }; - sys_32k_ck: sys_32k_ck { + sys_clk32_crystal_ck: sys_clk32_crystal_ck { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; + sys_clk32_pseudo_ck: sys_clk32_pseudo_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin1>; + clock-mult = <1>; + clock-div = <610>; + }; + virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; @@ -2170,4 +2178,12 @@ ti,bit-shift = <22>; reg = <0x0558>; }; + + sys_32k_ck: sys_32k_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>; + ti,bit-shift = <8>; + reg = <0x6c4>; + }; }; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index a2ddcb8c545a..45619f6162c5 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -91,8 +91,8 @@ clock-frequency = <141666666>; }; - pinctrl: pinctrl@c1109880 { - compatible = "amlogic,meson8-pinctrl"; + pinctrl_cbus: pinctrl@c1109880 { + compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0xc1109880 0x10>; #address-cells = <1>; #size-cells = <1>; @@ -108,29 +108,6 @@ #gpio-cells = <2>; }; - gpio_ao: ao-bank@c1108030 { - reg = <0xc8100014 0x4>, - <0xc810002c 0x4>, - <0xc8100024 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; - }; - }; - - i2c_ao_pins: i2c_mst_ao { - mux { - groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; - function = "i2c_mst_ao"; - }; - }; - spi_nor_pins: nor { mux { groups = "nor_d", "nor_q", "nor_c", "nor_cs"; @@ -157,4 +134,34 @@ }; }; + pinctrl_aobus: pinctrl@c8100084 { + compatible = "amlogic,meson8-aobus-pinctrl"; + reg = <0xc8100084 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio_ao: ao-bank@c1108030 { + reg = <0xc8100014 0x4>, + <0xc810002c 0x4>, + <0xc8100024 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + + i2c_ao_pins: i2c_mst_ao { + mux { + groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; + function = "i2c_mst_ao"; + }; + }; + }; }; /* end of / */ diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 8bad5571af46..2bfe401a4da9 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -155,8 +155,8 @@ reg = <0xc1108000 0x4>, <0xc1104000 0x460>; }; - pinctrl: pinctrl@c1109880 { - compatible = "amlogic,meson8b-pinctrl"; + pinctrl_cbus: pinctrl@c1109880 { + compatible = "amlogic,meson8b-cbus-pinctrl"; reg = <0xc1109880 0x10>; #address-cells = <1>; #size-cells = <1>; @@ -171,6 +171,14 @@ gpio-controller; #gpio-cells = <2>; }; + }; + + pinctrl_aobus: pinctrl@c8100084 { + compatible = "amlogic,meson8b-aobus-pinctrl"; + reg = <0xc8100084 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; gpio_ao: ao-bank@c1108030 { reg = <0xc8100014 0x4>, diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b3c26a96a726..d9e2d9c6e999 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -329,6 +329,7 @@ regulator-name = "V28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; /* due to battery cover sensor */ }; @@ -336,30 +337,35 @@ regulator-name = "VCSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vaux3 { regulator-name = "VMMC2_30"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vaux4 { regulator-name = "VCAM_ANA_28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vmmc1 { regulator-name = "VMMC1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vmmc2 { regulator-name = "V28_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; /* due VIO leak to AIC34 VDDs */ }; @@ -367,6 +373,7 @@ regulator-name = "VPLL"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; }; @@ -374,6 +381,7 @@ regulator-name = "VSDI_CSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; }; @@ -381,6 +389,7 @@ regulator-name = "VMMC2_IO_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vio { diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 387dc31822fe..96f8ce7bd2af 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -46,7 +46,7 @@ 0x480bd800 0x017c>; interrupts = <24>; iommus = <&mmu_isp>; - syscon = <&scm_conf 0xdc>; + syscon = <&scm_conf 0x6c>; ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>; #clock-cells = <1>; ports { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 2bd9c83300b2..421fe9f8a9eb 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -70,7 +70,7 @@ compatible = "arm,cortex-a9-twd-timer"; clocks = <&mpu_periphclk>; reg = <0x48240600 0x20>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>; interrupt-parent = <&gic>; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 902657d6713b..914bf4c47404 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -472,7 +472,7 @@ ldo1_reg: ldo1 { /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; - regulator-min-microvolt = <1500000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; @@ -498,7 +498,7 @@ ldo4_reg: ldo4 { /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <1500000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index ecc591dc0778..4d87d9c6c86d 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -513,7 +513,7 @@ ldo1_reg: ldo1 { /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; - regulator-min-microvolt = <1500000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; @@ -537,7 +537,7 @@ ldo4_reg: ldo4 { /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <1500000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 38805ebbe2ba..120b6b80cd39 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -269,7 +269,7 @@ omap5_pmx_wkup: pinmux@c840 { compatible = "ti,omap5-padconf", "pinctrl-single"; - reg = <0xc840 0x0038>; + reg = <0xc840 0x003c>; #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 65d0e8d98259..04f541bffbdd 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -666,7 +666,7 @@ }; sata0: sata@29000000 { - compatible = "generic-ahci"; + compatible = "qcom,apq8064-ahci", "generic-ahci"; status = "disabled"; reg = <0x29000000 0x180>; interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>; @@ -688,6 +688,7 @@ phys = <&sata_phy0>; phy-names = "sata-phy"; + ports-implemented = <0x1>; }; /* Temporary fixed regulator */ diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index ef5330578431..8193139d0d87 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,6 +1,6 @@ /dts-v1/; -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include "skeleton.dtsi" @@ -460,8 +460,6 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; - dma-names = "tx", "rx"; }; spmi_bus: spmi@fc4cf000 { @@ -479,16 +477,6 @@ interrupt-controller; #interrupt-cells = <4>; }; - - blsp2_dma: dma-controller@f9944000 { - compatible = "qcom,bam-v1.4.0"; - reg = <0xf9944000 0x19000>; - interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; }; smd { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 0ad71b81d3a2..cc6e28f81fe4 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -661,6 +661,7 @@ }; &pcie_bus_clk { + clock-frequency = <100000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 6c08314427d6..a9285d9a57cd 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -143,19 +143,11 @@ }; &pfc { - pinctrl-0 = <&scif_clk_pins>; - pinctrl-names = "default"; - scif0_pins: serial0 { renesas,groups = "scif0_data_d"; renesas,function = "scif0"; }; - scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; - }; - ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -229,11 +221,6 @@ status = "okay"; }; -&scif_clk { - clock-frequency = <14745600>; - status = "okay"; -}; - ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; @@ -414,6 +401,7 @@ }; &pcie_bus_clk { + clock-frequency = <100000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6439f0569fe2..1cd1b6a3a72a 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1083,9 +1083,8 @@ pcie_bus_clk: pcie_bus_clk { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <100000000>; + clock-frequency = <0>; clock-output-names = "pcie_bus"; - status = "disabled"; }; /* External SCIF clock */ @@ -1094,7 +1093,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - status = "disabled"; }; /* External USB clock - can be overridden by the board */ @@ -1112,7 +1110,6 @@ /* This value must be overridden by the board. */ clock-frequency = <0>; clock-output-names = "can_clk"; - status = "disabled"; }; /* Special CPG clocks */ diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 9d2b7e2f5975..346a49d805a7 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -125,8 +125,6 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; regulator-name = "vcc-lcd"; }; diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 07055eacbb0f..a691d590fbd1 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -63,6 +63,9 @@ CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_BU21013=y CONFIG_INPUT_MISC=y CONFIG_INPUT_AB8500_PONKEY=y +CONFIG_RMI4_CORE=y +CONFIG_RMI4_I2C=y +CONFIG_RMI4_F11=y # CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index b23c6c81c9ad..1ee94c716a7f 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -276,7 +276,7 @@ static inline int __attribute_const__ cpuid_feature_extract_field(u32 features, int feature = (features >> field) & 15; /* feature registers are signed values */ - if (feature > 8) + if (feature > 7) feature -= 16; return feature; diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index fc8ba1663601..99d9f630d6b6 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -84,6 +84,7 @@ #ifndef __ASSEMBLY__ +#ifdef CONFIG_CPU_CP15_MMU static inline unsigned int get_domain(void) { unsigned int domain; @@ -103,6 +104,16 @@ static inline void set_domain(unsigned val) : : "r" (val) : "memory"); isb(); } +#else +static inline unsigned int get_domain(void) +{ + return 0; +} + +static inline void set_domain(unsigned val) +{ +} +#endif #ifdef CONFIG_CPU_USE_DOMAINS #define modify_domain(dom,type) \ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 7b84657fba35..194b69923389 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -19,7 +19,7 @@ * This may need to be greater than __NR_last_syscall+1 in order to * account for the padding in the syscall table */ -#define __NR_syscalls (392) +#define __NR_syscalls (396) #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_GETHOSTNAME diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index 5dd2528e9e45..2cb9dc770e1d 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -418,6 +418,8 @@ #define __NR_membarrier (__NR_SYSCALL_BASE+389) #define __NR_mlock2 (__NR_SYSCALL_BASE+390) #define __NR_copy_file_range (__NR_SYSCALL_BASE+391) +#define __NR_preadv2 (__NR_SYSCALL_BASE+392) +#define __NR_pwritev2 (__NR_SYSCALL_BASE+393) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index dfc7cd6851ad..703fa0f3cd8f 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -399,8 +399,10 @@ CALL(sys_execveat) CALL(sys_userfaultfd) CALL(sys_membarrier) - CALL(sys_mlock2) +/* 390 */ CALL(sys_mlock2) CALL(sys_copy_file_range) + CALL(sys_preadv2) + CALL(sys_pwritev2) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 9b8c5a113434..fb1a69eb49c1 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -236,7 +236,7 @@ ENTRY(__setup_mpu) mov r0, #CONFIG_VECTORS_BASE @ Cover from VECTORS_BASE ldr r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL) /* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */ - mov r6, #(((PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN) + mov r6, #(((2 * PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN) setup_region r0, r5, r6, MPU_DATA_SIDE @ VECTORS_BASE, PL0 NA, enabled beq 3f @ Memory-map not unified diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 139791ed473d..2c4bea39cf22 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -430,11 +430,13 @@ static void __init patch_aeabi_idiv(void) pr_info("CPU: div instructions available: patching division code\n"); fn_addr = ((uintptr_t)&__aeabi_uidiv) & ~1; + asm ("" : "+g" (fn_addr)); ((u32 *)fn_addr)[0] = udiv_instruction(); ((u32 *)fn_addr)[1] = bx_lr_instruction(); flush_icache_range(fn_addr, fn_addr + 8); fn_addr = ((uintptr_t)&__aeabi_idiv) & ~1; + asm ("" : "+g" (fn_addr)); ((u32 *)fn_addr)[0] = sdiv_instruction(); ((u32 *)fn_addr)[1] = bx_lr_instruction(); flush_icache_range(fn_addr, fn_addr + 8); @@ -510,7 +512,7 @@ static void __init elf_hwcap_fixup(void) */ if (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) > 1 || (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) == 1 && - cpuid_feature_extract(CPUID_EXT_ISAR3, 20) >= 3)) + cpuid_feature_extract(CPUID_EXT_ISAR4, 20) >= 3)) elf_hwcap &= ~HWCAP_SWP; } diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 6accd66d26f0..dded1b763c16 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -1061,15 +1061,27 @@ static void cpu_init_hyp_mode(void *dummy) kvm_arm_init_debug(); } +static void cpu_hyp_reinit(void) +{ + if (is_kernel_in_hyp_mode()) { + /* + * cpu_init_stage2() is safe to call even if the PM + * event was cancelled before the CPU was reset. + */ + cpu_init_stage2(NULL); + } else { + if (__hyp_get_vectors() == hyp_default_vectors) + cpu_init_hyp_mode(NULL); + } +} + static int hyp_init_cpu_notify(struct notifier_block *self, unsigned long action, void *cpu) { switch (action) { case CPU_STARTING: case CPU_STARTING_FROZEN: - if (__hyp_get_vectors() == hyp_default_vectors) - cpu_init_hyp_mode(NULL); - break; + cpu_hyp_reinit(); } return NOTIFY_OK; @@ -1084,9 +1096,8 @@ static int hyp_init_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd, void *v) { - if (cmd == CPU_PM_EXIT && - __hyp_get_vectors() == hyp_default_vectors) { - cpu_init_hyp_mode(NULL); + if (cmd == CPU_PM_EXIT) { + cpu_hyp_reinit(); return NOTIFY_OK; } @@ -1101,10 +1112,17 @@ static void __init hyp_cpu_pm_init(void) { cpu_pm_register_notifier(&hyp_init_cpu_pm_nb); } +static void __init hyp_cpu_pm_exit(void) +{ + cpu_pm_unregister_notifier(&hyp_init_cpu_pm_nb); +} #else static inline void hyp_cpu_pm_init(void) { } +static inline void hyp_cpu_pm_exit(void) +{ +} #endif static void teardown_common_resources(void) @@ -1128,6 +1146,20 @@ static int init_subsystems(void) int err; /* + * Register CPU Hotplug notifier + */ + err = register_cpu_notifier(&hyp_init_cpu_nb); + if (err) { + kvm_err("Cannot register KVM init CPU notifier (%d)\n", err); + return err; + } + + /* + * Register CPU lower-power notifier + */ + hyp_cpu_pm_init(); + + /* * Init HYP view of VGIC */ err = kvm_vgic_hyp_init(); @@ -1166,6 +1198,8 @@ static void teardown_hyp_mode(void) free_hyp_pgds(); for_each_possible_cpu(cpu) free_page(per_cpu(kvm_arm_hyp_stack_page, cpu)); + unregister_cpu_notifier(&hyp_init_cpu_nb); + hyp_cpu_pm_exit(); } static int init_vhe_mode(void) @@ -1270,19 +1304,6 @@ static int init_hyp_mode(void) free_boot_hyp_pgd(); #endif - cpu_notifier_register_begin(); - - err = __register_cpu_notifier(&hyp_init_cpu_nb); - - cpu_notifier_register_done(); - - if (err) { - kvm_err("Cannot register HYP init CPU notifier (%d)\n", err); - goto out_err; - } - - hyp_cpu_pm_init(); - /* set size of VMID supported by CPU */ kvm_vmid_bits = kvm_get_vmid_bits(); kvm_info("%d-bit VMID\n", kvm_vmid_bits); diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 58dbd5c439df..d6d4191e68f2 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -1004,7 +1004,7 @@ static bool transparent_hugepage_adjust(kvm_pfn_t *pfnp, phys_addr_t *ipap) kvm_pfn_t pfn = *pfnp; gfn_t gfn = *ipap >> PAGE_SHIFT; - if (PageTransCompound(pfn_to_page(pfn))) { + if (PageTransCompoundMap(pfn_to_page(pfn))) { unsigned long mask; /* * The address we faulted on is backed by a transparent huge diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index d97c588550ad..bc4e63fa9808 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -121,6 +121,11 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context) const char *partnum = NULL; struct davinci_soc_info *soc_info = &davinci_soc_info; + if (!IS_BUILTIN(CONFIG_NVMEM)) { + pr_warn("Factory Config not available without CONFIG_NVMEM\n"); + goto bad_config; + } + ret = nvmem_device_read(nvmem, 0, sizeof(factory_config), &factory_config); if (ret != sizeof(struct factory_config)) { diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index f55ef2ef2f92..742133b7266a 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -33,6 +33,11 @@ void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context) char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; off_t offset = (off_t)context; + if (!IS_BUILTIN(CONFIG_NVMEM)) { + pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n"); + return; + } + /* Read MAC addr from EEPROM */ if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 7c21760f590f..875a2bab64f6 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -92,7 +92,7 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) if (IS_ERR(pd->clk[i])) break; - if (IS_ERR(pd->clk[i])) + if (IS_ERR(pd->pclk[i])) continue; /* Skip on first power up */ if (clk_set_parent(pd->clk[i], pd->pclk[i])) pr_err("%s: error setting parent to clock%d\n", diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c index a5edd7d60266..3d039ef021e0 100644 --- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c +++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c @@ -71,6 +71,7 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx( if (!pdata) pdata = &default_esdhc_pdata; - return imx_add_platform_device(data->devid, data->id, res, - ARRAY_SIZE(res), pdata, sizeof(*pdata)); + return imx_add_platform_device_dmamask(data->devid, data->id, res, + ARRAY_SIZE(res), pdata, sizeof(*pdata), + DMA_BIT_MASK(32)); } diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c index 7581e036bda6..ef9ed36e8a61 100644 --- a/arch/arm/mach-omap2/clockdomains7xx_data.c +++ b/arch/arm/mach-omap2/clockdomains7xx_data.c @@ -461,7 +461,7 @@ static struct clockdomain ipu_7xx_clkdm = { .cm_inst = DRA7XX_CM_CORE_AON_IPU_INST, .clkdm_offs = DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS, .dep_bit = DRA7XX_IPU_STATDEP_SHIFT, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, }; static struct clockdomain mpu1_7xx_clkdm = { diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index d85c24918c17..2abd53ae3e7a 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -669,9 +669,9 @@ void __init dra7xxx_check_revision(void) case 0: omap_revision = DRA722_REV_ES1_0; break; + case 1: default: - /* If we have no new revisions */ - omap_revision = DRA722_REV_ES1_0; + omap_revision = DRA722_REV_ES2_0; break; } break; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3c87e40650cf..49de4dd227be 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -368,6 +368,7 @@ void __init omap5_map_io(void) void __init dra7xx_map_io(void) { iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc)); + omap_barriers_init(); } #endif /* @@ -736,7 +737,8 @@ void __init omap5_init_late(void) #ifdef CONFIG_SOC_DRA7XX void __init dra7xx_init_early(void) { - omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE)); + omap2_set_globals_tap(DRA7XX_CLASS, + OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE)); omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); omap2_control_base_init(); omap4_pm_init_early(); diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index f397bd6bd6e3..2c04f2741476 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -274,6 +274,10 @@ static inline void omap5_irq_save_context(void) */ static void irq_save_context(void) { + /* DRA7 has no SAR to save */ + if (soc_is_dra7xx()) + return; + if (!sar_base) sar_base = omap4_get_sar_ram_base(); @@ -290,6 +294,9 @@ static void irq_sar_clear(void) { u32 val; u32 offset = SAR_BACKUP_STATUS_OFFSET; + /* DRA7 has no SAR to save */ + if (soc_is_dra7xx()) + return; if (soc_is_omap54xx()) offset = OMAP5_SAR_BACKUP_STATUS_OFFSET; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index b6d62e4cdfdd..2af6ff63e3b4 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1416,9 +1416,7 @@ static void _enable_sysc(struct omap_hwmod *oh) (sf & SYSC_HAS_CLOCKACTIVITY)) _set_clockactivity(oh, oh->class->sysc->clockact, &v); - /* If the cached value is the same as the new value, skip the write */ - if (oh->_sysc_cache != v) - _write_sysconfig(v, oh); + _write_sysconfig(v, oh); /* * Set the autoidle bit only after setting the smartidle bit @@ -1481,7 +1479,9 @@ static void _idle_sysc(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - _write_sysconfig(v, oh); + /* If the cached value is the same as the new value, skip the write */ + if (oh->_sysc_cache != v) + _write_sysconfig(v, oh); } /** diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index 39736ad2a754..df8327713d06 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -582,9 +582,11 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = { .user = OCP_USER_MPU, }; +/* USB needs udelay 1 after reset at least on hp t410, use 2 for margin */ static struct omap_hwmod_class_sysconfig dm81xx_usbhsotg_sysc = { .rev_offs = 0x0, .sysc_offs = 0x10, + .srst_udelay = 2, .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | SYSC_HAS_SOFTRESET, .idlemodes = SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_SMART, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 2dbd3785ee6f..d44e0e2f1106 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -198,7 +198,6 @@ void omap_sram_idle(void) int per_next_state = PWRDM_POWER_ON; int core_next_state = PWRDM_POWER_ON; int per_going_off; - int core_prev_state; u32 sdrc_pwr = 0; mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); @@ -278,16 +277,20 @@ void omap_sram_idle(void) sdrc_write_reg(sdrc_pwr, SDRC_POWER); /* CORE */ - if (core_next_state < PWRDM_POWER_ON) { - core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm); - if (core_prev_state == PWRDM_POWER_OFF) { - omap3_core_restore_context(); - omap3_cm_restore_context(); - omap3_sram_restore_context(); - omap2_sms_restore_context(); - } + if (core_next_state < PWRDM_POWER_ON && + pwrdm_read_prev_pwrst(core_pwrdm) == PWRDM_POWER_OFF) { + omap3_core_restore_context(); + omap3_cm_restore_context(); + omap3_sram_restore_context(); + omap2_sms_restore_context(); + } else { + /* + * In off-mode resume path above, omap3_core_restore_context + * also handles the INTC autoidle restore done here so limit + * this to non-off mode resume paths so we don't do it twice. + */ + omap3_intc_resume_idle(); } - omap3_intc_resume_idle(); pwrdm_post_transition(NULL); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 70df8f6cddcc..364418c78bf3 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -489,6 +489,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define DRA752_REV_ES2_0 (DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8)) #define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8)) #define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8)) +#define DRA722_REV_ES2_0 (DRA7XX_CLASS | (0x22 << 16) | (0x20 << 8)) void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 913a319c7b00..fffb697bbf0e 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -1235,5 +1235,6 @@ static struct platform_device pxa2xx_pxa_dma = { void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors) { pxa_dma_pdata.dma_channels = nb_channels; + pxa_dma_pdata.nb_requestors = nb_requestors; pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata); } diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index c6f6ed1cbed0..36e3c79f4973 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -61,10 +61,7 @@ config SA1100_H3100 select MFD_IPAQ_MICRO help Say Y here if you intend to run this kernel on the Compaq iPAQ - H3100 handheld computer. Information about this machine and the - Linux port to this machine can be found at: - - <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100> + H3100 handheld computer. config SA1100_H3600 bool "Compaq iPAQ H3600/H3700" @@ -73,10 +70,7 @@ config SA1100_H3600 select MFD_IPAQ_MICRO help Say Y here if you intend to run this kernel on the Compaq iPAQ - H3600 handheld computer. Information about this machine and the - Linux port to this machine can be found at: - - <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600> + H3600 and H3700 handheld computers. config SA1100_BADGE4 bool "HP Labs BadgePAD 4" diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index ad008e4b0c49..67d79f9c6bad 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -40,8 +40,7 @@ static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz, void __init shmobile_init_delay(void) { struct device_node *np, *cpus; - bool is_a7_a8_a9 = false; - bool is_a15 = false; + unsigned int div = 0; bool has_arch_timer = false; u32 max_freq = 0; @@ -55,27 +54,22 @@ void __init shmobile_init_delay(void) if (!of_property_read_u32(np, "clock-frequency", &freq)) max_freq = max(max_freq, freq); - if (of_device_is_compatible(np, "arm,cortex-a8") || - of_device_is_compatible(np, "arm,cortex-a9")) { - is_a7_a8_a9 = true; - } else if (of_device_is_compatible(np, "arm,cortex-a7")) { - is_a7_a8_a9 = true; - has_arch_timer = true; - } else if (of_device_is_compatible(np, "arm,cortex-a15")) { - is_a15 = true; + if (of_device_is_compatible(np, "arm,cortex-a8")) { + div = 2; + } else if (of_device_is_compatible(np, "arm,cortex-a9")) { + div = 1; + } else if (of_device_is_compatible(np, "arm,cortex-a7") || + of_device_is_compatible(np, "arm,cortex-a15")) { + div = 1; has_arch_timer = true; } } of_node_put(cpus); - if (!max_freq) + if (!max_freq || !div) return; - if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) { - if (is_a7_a8_a9) - shmobile_setup_delay_hz(max_freq, 1, 3); - else if (is_a15) - shmobile_setup_delay_hz(max_freq, 2, 4); - } + if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) + shmobile_setup_delay_hz(max_freq, 1, div); } diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S index 5d94b7a2fb10..c160fa3007e9 100644 --- a/arch/arm/mach-socfpga/headsmp.S +++ b/arch/arm/mach-socfpga/headsmp.S @@ -13,6 +13,7 @@ #include <asm/assembler.h> .arch armv7-a + .arm ENTRY(secondary_trampoline) /* CPU1 will always fetch from 0x0 when it is brought out of reset. diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c index 69141357afe8..db04142f88bc 100644 --- a/arch/arm/mach-uniphier/platsmp.c +++ b/arch/arm/mach-uniphier/platsmp.c @@ -120,7 +120,7 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus) if (ret) return ret; - uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, sizeof(SZ_4)); + uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4); if (!uniphier_smp_rom_boot_rsv2) { pr_err("failed to map ROM_BOOT_RSV2 register\n"); return -ENOMEM; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index deac58d5f1f7..c941e93048ad 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -762,7 +762,8 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, if (!mask) return NULL; - buf = kzalloc(sizeof(*buf), gfp); + buf = kzalloc(sizeof(*buf), + gfp & ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM)); if (!buf) return NULL; diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index d0ba3551d49a..3cced8455727 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -235,7 +235,7 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page) */ if (mapping && cache_is_vipt_aliasing()) flush_pfn_alias(page_to_pfn(page), - page->index << PAGE_CACHE_SHIFT); + page->index << PAGE_SHIFT); } static void __flush_dcache_aliases(struct address_space *mapping, struct page *page) @@ -250,7 +250,7 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p * data in the current VM view associated with this page. * - aliasing VIPT: we only need to find one mapping of this page. */ - pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT); + pgoff = page->index; flush_dcache_mmap_lock(mapping); vma_interval_tree_foreach(mpnt, &mapping->i_mmap, pgoff, pgoff) { diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 1dd10936d68d..d5805e4bf2fc 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -87,7 +87,6 @@ static unsigned long irbar_read(void) /* MPU initialisation functions */ void __init sanity_check_meminfo_mpu(void) { - int i; phys_addr_t phys_offset = PHYS_OFFSET; phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size; struct memblock_region *reg; @@ -110,11 +109,13 @@ void __init sanity_check_meminfo_mpu(void) } else { /* * memblock auto merges contiguous blocks, remove - * all blocks afterwards + * all blocks afterwards in one go (we can't remove + * blocks separately while iterating) */ pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n", - &mem_start, ®->base); - memblock_remove(reg->base, reg->size); + &mem_end, ®->base); + memblock_remove(reg->base, 0 - reg->base); + break; } } @@ -144,7 +145,7 @@ void __init sanity_check_meminfo_mpu(void) pr_warn("Truncating memory from %pa to %pa (MPU region constraints)", &specified_mem_size, &aligned_region_size); memblock_remove(mem_start + aligned_region_size, - specified_mem_size - aligned_round_size); + specified_mem_size - aligned_region_size); mem_end = mem_start + aligned_region_size; } @@ -261,7 +262,7 @@ void __init mpu_setup(void) return; region_err = mpu_setup_region(MPU_RAM_REGION, PHYS_OFFSET, - ilog2(meminfo.bank[0].size), + ilog2(memblock.memory.regions[0].size), MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL); if (region_err) { panic("MPU region initialization failure! %d", region_err); @@ -285,7 +286,7 @@ void __init arm_mm_memblock_reserve(void) * some architectures which the DRAM is the exception vector to trap, * alloc_page breaks with error, although it is not NULL, but "0." */ - memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE); + memblock_reserve(CONFIG_VECTORS_BASE, 2 * PAGE_SIZE); #else /* ifndef CONFIG_CPU_V7M */ /* * There is no dedicated vector page on V7-M. So nothing needs to be diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0f8963a7e7d9..6fcaac8e200f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -281,12 +281,12 @@ __v7_ca17mp_setup: bl v7_invalidate_l1 ldmia r12, {r1-r6, lr} #ifdef CONFIG_SMP + orr r10, r10, #(1 << 6) @ Enable SMP/nAMP mode ALT_SMP(mrc p15, 0, r0, c1, c0, 1) - ALT_UP(mov r0, #(1 << 6)) @ fake it for UP - tst r0, #(1 << 6) @ SMP/nAMP mode enabled? - orreq r0, r0, #(1 << 6) @ Enable SMP/nAMP mode - orreq r0, r0, r10 @ Enable CPU-specific SMP bits - mcreq p15, 0, r0, c1, c0, 1 + ALT_UP(mov r0, r10) @ fake it for UP + orr r10, r10, r0 @ Set required bits + teq r10, r0 @ Were they already set? + mcrne p15, 0, r10, c1, c0, 1 @ No, update register #endif b __v7_setup_cont |