diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/Kconfig | 25 | ||||
| -rw-r--r-- | arch/arm/mach-alpine/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/Kconfig | 8 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/Kconfig | 22 | ||||
| -rw-r--r-- | arch/arm/mach-ks8695/Kconfig | 10 | ||||
| -rw-r--r-- | arch/arm/mach-mv78xx0/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mvebu/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm64/Kconfig | 14 |
11 files changed, 33 insertions, 58 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 91be74d8df65..50bc67857432 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -147,9 +147,6 @@ config ARM_DMA_IOMMU_ALIGNMENT endif -config MIGHT_HAVE_PCI - bool - config SYS_SUPPORTS_APM_EMULATION bool @@ -333,7 +330,7 @@ config ARCH_MULTIPLATFORM select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_IRQ_MULTI_HANDLER - select MIGHT_HAVE_PCI + select HAVE_PCI select PCI_DOMAINS if PCI select SPARSE_IRQ select USE_OF @@ -407,7 +404,7 @@ config ARCH_IOP13XX select CPU_XSC3 select NEED_MACH_MEMORY_H select NEED_RET_TO_USER - select PCI + select FORCE_PCI select PLAT_IOP select VMSPLIT_1G select SPARSE_IRQ @@ -421,7 +418,7 @@ config ARCH_IOP32X select GPIO_IOP select GPIOLIB select NEED_RET_TO_USER - select PCI + select FORCE_PCI select PLAT_IOP help Support for Intel's 80219 and IOP32X (XScale) family of @@ -434,7 +431,7 @@ config ARCH_IOP33X select GPIO_IOP select GPIOLIB select NEED_RET_TO_USER - select PCI + select FORCE_PCI select PLAT_IOP help Support for Intel's IOP33X (XScale) family of processors. @@ -449,7 +446,7 @@ config ARCH_IXP4XX select DMABOUNCE if PCI select GENERIC_CLOCKEVENTS select GPIOLIB - select MIGHT_HAVE_PCI + select HAVE_PCI select NEED_MACH_IO_H select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO @@ -462,7 +459,7 @@ config ARCH_DOVE select GENERIC_CLOCKEVENTS select GENERIC_IRQ_MULTI_HANDLER select GPIOLIB - select MIGHT_HAVE_PCI + select HAVE_PCI select MVEBU_MBUS select PINCTRL select PINCTRL_DOVE @@ -1230,14 +1227,6 @@ config ISA_DMA config ISA_DMA_API bool -config PCI - bool "PCI support" if MIGHT_HAVE_PCI - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or - VESA. If you have PCI, say Y, otherwise N. - config PCI_DOMAINS bool "Support for multiple PCI domains" depends on PCI @@ -1266,8 +1255,6 @@ config PCI_HOST_ITE8152 default y select DMABOUNCE -source "drivers/pci/Kconfig" - source "drivers/pcmcia/Kconfig" endmenu diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig index e3cbb07fe1b4..bc04c91294cf 100644 --- a/arch/arm/mach-alpine/Kconfig +++ b/arch/arm/mach-alpine/Kconfig @@ -9,7 +9,7 @@ config ARCH_ALPINE select HAVE_ARM_ARCH_TIMER select HAVE_SMP select MFD_SYSCON - select PCI + select FORCE_PCI select PCI_HOST_GENERIC help This enables support for the Annapurna Labs Alpine V1 boards. diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index cbbdd84cf49a..816a5b89be25 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -9,7 +9,7 @@ config ARCH_CATS select FOOTBRIDGE_HOST select ISA select ISA_DMA - select PCI + select FORCE_PCI help Say Y here if you intend to run this kernel on the CATS. @@ -20,7 +20,7 @@ config ARCH_PERSONAL_SERVER select FOOTBRIDGE_HOST select ISA select ISA_DMA - select PCI + select FORCE_PCI ---help--- Say Y here if you intend to run this kernel on the Compaq Personal Server. @@ -53,7 +53,7 @@ config ARCH_EBSA285_HOST select ISA select ISA_DMA select ARCH_MAY_HAVE_PC_FDC - select PCI + select FORCE_PCI help Say Y here if you intend to run this kernel on the EBSA285 card in host ("central function") mode. @@ -67,7 +67,7 @@ config ARCH_NETWINDER select FOOTBRIDGE_HOST select ISA select ISA_DMA - select PCI + select FORCE_PCI help Say Y here if you intend to run this kernel on the Rebel.COM NetWinder. Information about this machine can be found at: diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index c342dc4e8a45..fea008123eb1 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -7,7 +7,7 @@ comment "IXP4xx Platforms" config MACH_NSLU2 bool prompt "Linksys NSLU2" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support Linksys's NSLU2 NAS device. For more information on this platform, @@ -15,7 +15,7 @@ config MACH_NSLU2 config MACH_AVILA bool "Avila" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support the Gateworks Avila Network Platform. For more information on this platform, @@ -31,7 +31,7 @@ config MACH_LOFT config ARCH_ADI_COYOTE bool "Coyote" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support the ADI Engineering Coyote Gateway Reference Platform. For more @@ -39,7 +39,7 @@ config ARCH_ADI_COYOTE config MACH_GATEWAY7001 bool "Gateway 7001" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support Gateway's 7001 Access Point. For more information on this platform, @@ -47,7 +47,7 @@ config MACH_GATEWAY7001 config MACH_WG302V2 bool "Netgear WG302 v2 / WAG302 v2" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support Netgear's WG302 v2 or WAG302 v2 Access Points. For more information @@ -107,7 +107,7 @@ config ARCH_PRPMC1100 config MACH_NAS100D bool prompt "NAS100D" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support Iomega's NAS 100d device. For more information on this platform, @@ -116,7 +116,7 @@ config MACH_NAS100D config MACH_DSMG600 bool prompt "D-Link DSM-G600 RevA" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support D-Link's DSM-G600 RevA device. For more information on this platform, @@ -130,7 +130,7 @@ config ARCH_IXDP4XX config MACH_FSG bool prompt "Freecom FSG-3" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support Freecom's FSG-3 device. For more information on this platform, @@ -139,7 +139,7 @@ config MACH_FSG config MACH_ARCOM_VULCAN bool prompt "Arcom/Eurotech Vulcan" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support Arcom's Vulcan board. @@ -160,7 +160,7 @@ config CPU_IXP43X config MACH_GTWX5715 bool "Gemtek WX5715 (Linksys WRV54G)" depends on ARCH_IXP4XX - select PCI + select FORCE_PCI help This board is currently inside the Linksys WRV54G Gateways. @@ -183,7 +183,7 @@ config MACH_DEVIXP config MACH_MICCPT bool "Omicron MICCPT" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support the MICCPT board from OMICRON electronics GmbH. diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig index a545976bdbd6..b3185c05fffa 100644 --- a/arch/arm/mach-ks8695/Kconfig +++ b/arch/arm/mach-ks8695/Kconfig @@ -4,7 +4,7 @@ menu "Kendin/Micrel KS8695 Implementations" config MACH_KS8695 bool "KS8695 development board" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to run on the original Kendin-Micrel KS8695 development board. @@ -52,7 +52,7 @@ config MACH_CM4002 config MACH_CM4008 bool "OpenGear CM4008" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear CM4008 Console Server. See http://www.opengear.com for more @@ -60,7 +60,7 @@ config MACH_CM4008 config MACH_CM41xx bool "OpenGear CM41xx" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear CM4016 or CM4048 Console Servers. See http://www.opengear.com for @@ -68,7 +68,7 @@ config MACH_CM41xx config MACH_IM4004 bool "OpenGear IM4004" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear IM4004 Secure Access Server. See http://www.opengear.com for @@ -76,7 +76,7 @@ config MACH_IM4004 config MACH_IM42xx bool "OpenGear IM42xx" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear IM4216 or IM4248 Console Servers. See http://www.opengear.com for diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index 81c0f08a2684..d686a844a790 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -4,7 +4,7 @@ menuconfig ARCH_MV78XX0 select CPU_FEROCEON select GPIOLIB select MVEBU_MBUS - select PCI + select FORCE_PCI select PLAT_ORION_LEGACY help Support for the following Marvell MV78xx0 series SoCs: diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 2c20599cc350..5d6fbadd7849 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -124,7 +124,7 @@ config MACH_KIRKWOOD select MACH_MVEBU_ANY select ORION_IRQCHIP select ORION_TIMER - select PCI + select FORCE_PCI select PCI_QUIRKS select PINCTRL_KIRKWOOD help diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index a810f4dd34b1..38c45a88c793 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -5,7 +5,7 @@ menuconfig ARCH_ORION5X select GENERIC_CLOCKEVENTS select GPIOLIB select MVEBU_MBUS - select PCI + select FORCE_PCI select PHYLIB if NETDEVICES select PLAT_ORION_LEGACY help diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index a68b34183107..b185794549be 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -125,7 +125,7 @@ config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI select IWMMXT - select MIGHT_HAVE_PCI + select HAVE_PCI select NEED_MACH_IO_H if PCI select PXA25x select PXA27x diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index fde7ef1ab192..acb2c520ae8b 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -120,7 +120,7 @@ config SA1100_LART config SA1100_NANOENGINE bool "nanoEngine" select ARM_SA1110_CPUFREQ - select PCI + select FORCE_PCI select PCI_NANOENGINE help Say Y here if you are using the Bright Star Engineering nanoEngine. diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 787d7850e064..feffc52c823f 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -103,6 +103,7 @@ config ARM64 select GENERIC_TIME_VSYSCALL select HANDLE_DOMAIN_IRQ select HARDIRQS_SW_RESEND + select HAVE_PCI select HAVE_ACPI_APEI if (ACPI && EFI) select HAVE_ALIGNED_STRUCT_PAGE if SLUB select HAVE_ARCH_AUDITSYSCALL @@ -287,15 +288,6 @@ config ARCH_PROC_KCORE_TEXT source "arch/arm64/Kconfig.platforms" -menu "Bus support" - -config PCI - bool "PCI support" - help - This feature enables support for PCI bus system. If you say Y - here, the kernel will include drivers and infrastructure code - to support PCI bus devices. - config PCI_DOMAINS def_bool PCI @@ -305,10 +297,6 @@ config PCI_DOMAINS_GENERIC config PCI_SYSCALL def_bool PCI -source "drivers/pci/Kconfig" - -endmenu - menu "Kernel Features" menu "ARM errata workarounds via the alternatives framework" |