1624 files changed, 86271 insertions, 31741 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 15949459611f..87b63fde06d7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -24,14 +24,15 @@ config ARM
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_BPF_JIT
+	select HAVE_CC_STACKPROTECTOR
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_C_RECORDMCOUNT
-	select HAVE_CC_STACKPROTECTOR
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_DMA_ATTRS
@@ -113,9 +114,6 @@ config ARM_DMA_IOMMU_ALIGNMENT
 
 endif
 
-config HAVE_PWM
-	bool
-
 config MIGHT_HAVE_PCI
 	bool
 
@@ -129,7 +127,7 @@ config HAVE_TCM
 config HAVE_PROC_CPU
 	bool
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	bool
 
 config EISA
@@ -167,12 +165,9 @@ config TRACE_IRQFLAGS_SUPPORT
 	bool
 	default y
 
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
 config RWSEM_XCHGADD_ALGORITHM
 	bool
+	default y
 
 config ARCH_HAS_ILOG2_U32
 	bool
@@ -207,6 +202,9 @@ config ZONE_DMA
 config NEED_DMA_MAP_STATE
        def_bool y
 
+config ARCH_SUPPORTS_UPROBES
+	def_bool y
+
 config ARCH_HAS_DMA_SET_COHERENT_MASK
 	bool
 
@@ -306,9 +304,14 @@ choice
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
 	depends on MMU
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_HAS_SG_CHAIN
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
+	select CLKSRC_OF
 	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_PCI
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
@@ -371,7 +374,6 @@ config ARCH_AT91
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select IRQ_DOMAIN
-	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H if PCCARD
 	select PINCTRL
 	select PINCTRL_AT91 if USE_OF
@@ -388,8 +390,6 @@ config ARCH_CLPS711X
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
 	select MFD_SYSCON
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
 	help
 	  Support for Cirrus Logic 711x/721x/731x based boards.
 
@@ -409,7 +409,7 @@ config ARCH_EBSA110
 	select ISA
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an
@@ -421,15 +421,13 @@ config ARCH_EFM32
 	depends on !MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_NVIC
-	# CLKSRC_MMIO is wrong here, but needed until a proper fix is merged,
-	# i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO
-	select CLKSRC_MMIO
+	select AUTO_ZRELADDR
 	select CLKSRC_OF
 	select COMMON_CLK
 	select CPU_V7M
 	select GENERIC_CLOCKEVENTS
 	select NO_DMA
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select SPARSE_IRQ
 	select USE_OF
 	help
@@ -479,6 +477,7 @@ config ARCH_IOP13XX
 	select PCI
 	select PLAT_IOP
 	select VMSPLIT_1G
+	select SPARSE_IRQ
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
 
@@ -511,8 +510,8 @@ config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
 	select CPU_XSCALE
 	select DMABOUNCE if PCI
@@ -534,7 +533,6 @@ config ARCH_DOVE
 	select PINCTRL
 	select PINCTRL_DOVE
 	select PLAT_ORION_LEGACY
-	select USB_ARCH_HAS_EHCI
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
@@ -632,8 +630,6 @@ config ARCH_LPC32XX
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_IDE
-	select HAVE_PWM
-	select USB_ARCH_HAS_OHCI
 	select USE_OF
 	help
 	  Support for the NXP LPC32XX family of processors
@@ -657,9 +653,8 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_MSM_NODT
-	bool "Qualcomm MSM"
-	select ARCH_MSM
+config ARCH_MSM
+	bool "Qualcomm MSM (non-multiplatform)"
 	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
@@ -682,7 +677,7 @@ config ARCH_SHMOBILE_LEGACY
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select MULTI_IRQ_HANDLER
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select PINCTRL
 	select PM_GENERIC_DOMAINS if PM
 	select SPARSE_IRQ
@@ -697,13 +692,14 @@ config ARCH_RPC
 	select ARCH_MAY_HAVE_PC_FDC
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_USES_GETTIMEOFFSET
+	select CPU_SA110
 	select FIQ
 	select HAVE_IDE
 	select HAVE_PATA_PLATFORM
 	select ISA_DMA_API
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select VIRT_TO_BUS
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
@@ -731,6 +727,7 @@ config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select GENERIC_CLOCKEVENTS
@@ -753,29 +750,30 @@ config ARCH_S3C64XX
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
-	select COMMON_CLK
+	select COMMON_CLK_SAMSUNG
 	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_TCM
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select PLAT_SAMSUNG
-	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS if PM
 	select S3C_DEV_NAND
 	select S3C_GPIO_TRACK
 	select SAMSUNG_ATAGS
 	select SAMSUNG_WAKEMASK
 	select SAMSUNG_WDT_RESET
-	select USB_ARCH_HAS_OHCI
 	help
 	  Samsung S3C64XX series based systems
 
 config ARCH_S5P64X0
 	bool "Samsung S5P6440 S5P6450"
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select CPU_V6
@@ -794,6 +792,7 @@ config ARCH_S5P64X0
 config ARCH_S5PC100
 	bool "Samsung S5PC100"
 	select ARCH_REQUIRE_GPIOLIB
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
@@ -813,6 +812,7 @@ config ARCH_S5PV210
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SPARSEMEM_ENABLE
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
@@ -827,25 +827,6 @@ config ARCH_S5PV210
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
-config ARCH_EXYNOS
-	bool "Samsung EXYNOS"
-	select ARCH_HAS_CPUFREQ
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_GIC
-	select COMMON_CLK
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select HAVE_S3C_RTC if RTC_CLASS
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
-
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL
@@ -886,6 +867,12 @@ menu "Multiple platform selection"
 
 comment "CPU Core family selection"
 
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+	select CPU_FA526
+
 config ARCH_MULTI_V4T
 	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
 	depends on !ARCH_MULTI_V6_V7
@@ -898,7 +885,7 @@ config ARCH_MULTI_V5
 	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
 	depends on !ARCH_MULTI_V6_V7
 	select ARCH_MULTI_V4_V5
-	select CPU_ARM926T if (!CPU_ARM946E || CPU_ARM1020 || \
+	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
 		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
 		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
 
@@ -908,16 +895,18 @@ config ARCH_MULTI_V4_V5
 config ARCH_MULTI_V6
 	bool "ARMv6 based platforms (ARM11)"
 	select ARCH_MULTI_V6_V7
-	select CPU_V6
+	select CPU_V6K
 
 config ARCH_MULTI_V7
 	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
 	default y
 	select ARCH_MULTI_V6_V7
 	select CPU_V7
+	select HAVE_SMP
 
 config ARCH_MULTI_V6_V7
 	bool
+	select MIGHT_HAVE_CACHE_L2X0
 
 config ARCH_MULTI_CPU_AUTO
 	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
@@ -925,6 +914,13 @@ config ARCH_MULTI_CPU_AUTO
 
 endmenu
 
+config ARCH_VIRT
+	bool "Dummy Virtual Machine" if ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 # Kconfigs may be included either alphabetically (according to the
@@ -934,9 +930,9 @@ source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
 
-source "arch/arm/mach-bcm/Kconfig"
+source "arch/arm/mach-axxia/Kconfig"
 
-source "arch/arm/mach-bcm2835/Kconfig"
+source "arch/arm/mach-bcm/Kconfig"
 
 source "arch/arm/mach-berlin/Kconfig"
 
@@ -1005,6 +1001,8 @@ source "arch/arm/plat-pxa/Kconfig"
 
 source "arch/arm/mach-mmp/Kconfig"
 
+source "arch/arm/mach-qcom/Kconfig"
+
 source "arch/arm/mach-realview/Kconfig"
 
 source "arch/arm/mach-rockchip/Kconfig"
@@ -1048,8 +1046,6 @@ source "arch/arm/mach-versatile/Kconfig"
 source "arch/arm/mach-vexpress/Kconfig"
 source "arch/arm/plat-versatile/Kconfig"
 
-source "arch/arm/mach-virt/Kconfig"
-
 source "arch/arm/mach-vt8500/Kconfig"
 
 source "arch/arm/mach-w90x900/Kconfig"
@@ -1090,15 +1086,10 @@ source "arch/arm/firmware/Kconfig"
 
 source arch/arm/mm/Kconfig
 
-config ARM_NR_BANKS
-	int
-	default 16 if ARCH_EP93XX
-	default 8
-
 config IWMMXT
-	bool "Enable iWMMXt support" if !CPU_PJ4
-	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
+	bool "Enable iWMMXt support"
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
+	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -1215,19 +1206,6 @@ config ARM_ERRATA_742231
 	  register of the Cortex-A9 which reduces the linefill issuing
 	  capabilities of the processor.
 
-config PL310_ERRATA_588369
-	bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
-	depends on CACHE_L2X0
-	help
-	   The PL310 L2 cache controller implements three types of Clean &
-	   Invalidate maintenance operations: by Physical Address
-	   (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
-	   They are architecturally defined to behave as the execution of a
-	   clean operation followed immediately by an invalidate operation,
-	   both performing to the same memory location. This functionality
-	   is not correctly implemented in PL310 as clean lines are not
-	   invalidated as a result of these operations.
-
 config ARM_ERRATA_643719
 	bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
 	depends on CPU_V7 && SMP
@@ -1250,17 +1228,6 @@ config ARM_ERRATA_720789
 	  tables. The workaround changes the TLB flushing routines to invalidate
 	  entries regardless of the ASID.
 
-config PL310_ERRATA_727915
-	bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
-	depends on CACHE_L2X0
-	help
-	  PL310 implements the Clean & Invalidate by Way L2 cache maintenance
-	  operation (offset 0x7FC). This operation runs in background so that
-	  PL310 can handle normal accesses while it is in progress. Under very
-	  rare circumstances, due to this erratum, write data can be lost when
-	  PL310 treats a cacheable write transaction during a Clean &
-	  Invalidate by Way operation.
-
 config ARM_ERRATA_743622
 	bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
 	depends on CPU_V7
@@ -1286,21 +1253,6 @@ config ARM_ERRATA_751472
 	  operation is received by a CPU before the ICIALLUIS has completed,
 	  potentially leading to corrupted entries in the cache or TLB.
 
-config PL310_ERRATA_753970
-	bool "PL310 errata: cache sync operation may be faulty"
-	depends on CACHE_PL310
-	help
-	  This option enables the workaround for the 753970 PL310 (r3p0) erratum.
-
-	  Under some condition the effect of cache sync operation on
-	  the store buffer still remains when the operation completes.
-	  This means that the store buffer is always asked to drain and
-	  this prevents it from merging any further writes. The workaround
-	  is to replace the normal offset of cache sync operation (0x730)
-	  by another offset targeting an unmapped PL310 register 0x740.
-	  This has the same effect as the cache sync operation: store buffer
-	  drain and waiting for all buffers empty.
-
 config ARM_ERRATA_754322
 	bool "ARM errata: possible faulty MMU translations following an ASID switch"
 	depends on CPU_V7
@@ -1349,18 +1301,6 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
-config PL310_ERRATA_769419
-	bool "PL310 errata: no automatic Store Buffer drain"
-	depends on CACHE_L2X0
-	help
-	  On revisions of the PL310 prior to r3p2, the Store Buffer does
-	  not automatically drain. This can cause normal, non-cacheable
-	  writes to be retained when the memory system is idle, leading
-	  to suboptimal I/O performance for drivers using coherent DMA.
-	  This option adds a write barrier to the cpu_idle loop so that,
-	  on systems with an outer cache, the store buffer is drained
-	  explicitly.
-
 config ARM_ERRATA_775420
        bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
        depends on CPU_V7
@@ -1561,8 +1501,8 @@ config BIG_LITTLE
 config BL_SWITCHER
 	bool "big.LITTLE switcher support"
 	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
-	select CPU_PM
 	select ARM_CPU_SUSPEND
+	select CPU_PM
 	help
 	  The big.LITTLE "switcher" provides the core functionality to
 	  transparently handle transition between a cluster of A15's
@@ -1631,9 +1571,9 @@ config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
 	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX
+	default 416 if ARCH_SUNXI
 	default 392 if ARCH_U8500
 	default 352 if ARCH_VT8500
-	default 288 if ARCH_SUNXI
 	default 264 if MACH_H4700
 	default 0
 	help
@@ -1906,9 +1846,9 @@ config XEN
 	depends on CPU_V7 && !CPU_V6
 	depends on !GENERIC_ATOMIC64
 	depends on MMU
+	select ARCH_DMA_ADDR_T_64BIT
 	select ARM_PSCI
 	select SWIOTLB_XEN
-	select ARCH_DMA_ADDR_T_64BIT
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
@@ -1921,6 +1861,7 @@ config USE_OF
 	select IRQ_DOMAIN
 	select OF
 	select OF_EARLY_FLATTREE
+	select OF_RESERVED_MEM
 	help
 	  Include support for flattened device tree machine descriptions.
 
@@ -2273,12 +2214,17 @@ source "kernel/power/Kconfig"
 config ARCH_SUSPEND_POSSIBLE
 	depends on !ARCH_S5PC100
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
-		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
+		CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
 	def_bool y
 
 config ARM_CPU_SUSPEND
 	def_bool PM_SLEEP
 
+config ARCH_HIBERNATION_POSSIBLE
+	bool
+	depends on MMU
+	default y if ARCH_SUSPEND_POSSIBLE
+
 endmenu
 
 source "net/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 0531da8e5216..8f90595069a1 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -106,9 +106,14 @@ choice
 		depends on ARCH_BCM2835
 		select DEBUG_UART_PL01X
 
+	config DEBUG_BCM_5301X
+		bool "Kernel low-level debugging on BCM5301X UART1"
+		depends on ARCH_BCM_5301X
+		select DEBUG_UART_PL01X
+
 	config DEBUG_BCM_KONA_UART
 		bool "Kernel low-level debugging messages via BCM KONA UART"
-		depends on ARCH_BCM
+		depends on ARCH_BCM_MOBILE
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
@@ -171,15 +176,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART0 serial port on DaVinci DMx devices.
 
-	config DEBUG_DAVINCI_TNETV107X_UART1
-		bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
-		depends on ARCH_DAVINCI_TNETV107X
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART1 serial port on DaVinci TNETV107X
-		  devices.
-
 	config DEBUG_ZYNQ_UART0
 		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
 		depends on ARCH_ZYNQ
@@ -321,6 +317,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6SL.
 
+	config DEBUG_IMX6SX_UART
+		bool "i.MX6SX Debug UART"
+		depends on SOC_IMX6SX
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6SX.
+
 	config DEBUG_KEYSTONE_UART0
 		bool "Kernel low-level debugging on KEYSTONE2 using UART0"
 		depends on ARCH_KEYSTONE
@@ -353,56 +356,40 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on MMP UART3.
 
-	config DEBUG_MSM_UART1
-		bool "Kernel low-level debugging messages via MSM UART1"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
-		select DEBUG_MSM_UART
+	config DEBUG_MSM_UART
+		bool "Kernel low-level debugging messages via MSM UART"
+		depends on ARCH_MSM
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the first serial port on MSM devices.
+		  their output to the serial port on MSM devices.
 
-	config DEBUG_MSM_UART2
-		bool "Kernel low-level debugging messages via MSM UART2"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
-		select DEBUG_MSM_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the second serial port on MSM devices.
+		  ARCH                DEBUG_UART_PHYS   DEBUG_UART_BASE   #
+		  MSM7X00A, QSD8X50   0xa9a00000        0xe1000000        UART1
+		  MSM7X00A, QSD8X50   0xa9b00000        0xe1000000        UART2
+		  MSM7X00A, QSD8X50   0xa9c00000        0xe1000000        UART3
 
-	config DEBUG_MSM_UART3
-		bool "Kernel low-level debugging messages via MSM UART3"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
-		select DEBUG_MSM_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the third serial port on MSM devices.
+		  MSM7X30             0xaca00000        0xe1000000        UART1
+		  MSM7X30             0xacb00000        0xe1000000        UART2
+		  MSM7X30             0xacc00000        0xe1000000        UART3
 
-	config DEBUG_MSM8660_UART
-		bool "Kernel low-level debugging messages via MSM 8660 UART"
-		depends on ARCH_MSM8X60
-		select MSM_HAS_DEBUG_UART_HS
-		select DEBUG_MSM_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8660 devices.
+		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+		  options based on your needs.
 
-	config DEBUG_MSM8960_UART
-		bool "Kernel low-level debugging messages via MSM 8960 UART"
-		depends on ARCH_MSM8960
-		select MSM_HAS_DEBUG_UART_HS
-		select DEBUG_MSM_UART
+	config DEBUG_QCOM_UARTDM
+		bool "Kernel low-level debugging messages via QCOM UARTDM"
+		depends on ARCH_QCOM
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8960 devices.
+		  their output to the serial port on Qualcomm devices.
 
-	config DEBUG_MSM8974_UART
-		bool "Kernel low-level debugging messages via MSM 8974 UART"
-		depends on ARCH_MSM8974
-		select MSM_HAS_DEBUG_UART_HS
-		select DEBUG_MSM_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8974 devices.
+		  ARCH      DEBUG_UART_PHYS   DEBUG_UART_BASE
+		  APQ8084   0xf995e000        0xfa75e000
+		  MSM8X60   0x19c40000        0xf0040000
+		  MSM8960   0x16440000        0xf0040000
+		  MSM8974   0xf991e000        0xfa71e000
+
+		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+		  options based on your needs.
 
 	config DEBUG_MVEBU_UART
 		bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
@@ -629,6 +616,7 @@ choice
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		bool "Use S3C UART 0 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -641,6 +629,7 @@ choice
 	config DEBUG_S3C_UART1
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		bool "Use S3C UART 1 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -653,6 +642,7 @@ choice
 	config DEBUG_S3C_UART2
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		bool "Use S3C UART 2 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -674,6 +664,33 @@ choice
 		  The uncompressor code port configuration is now handled
 		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
 
+	config DEBUG_S3C2410_UART0
+		depends on ARCH_S3C24XX
+		select DEBUG_S3C2410_UART
+		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
+
+	config DEBUG_S3C2410_UART1
+		depends on ARCH_S3C24XX
+		select DEBUG_S3C2410_UART
+		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 1. The port must have been initialised
+		  by the boot-loader before use.
+
+	config DEBUG_S3C2410_UART2
+		depends on ARCH_S3C24XX
+		select DEBUG_S3C2410_UART
+		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 2. The port must have been initialised
+		  by the boot-loader before use.
+
 	config DEBUG_SOCFPGA_UART
 		depends on ARCH_SOCFPGA
 		bool "Use SOCFPGA UART for low-level debug"
@@ -925,6 +942,13 @@ endchoice
 config DEBUG_EXYNOS_UART
 	bool
 
+config DEBUG_S3C2410_UART
+	bool
+	select DEBUG_S3C24XX_UART
+
+config DEBUG_S3C24XX_UART
+	bool
+
 config DEBUG_OMAP2PLUS_UART
 	bool
 	depends on ARCH_OMAP2PLUS
@@ -939,13 +963,23 @@ config DEBUG_IMX_UART_PORT
 						DEBUG_IMX51_UART || \
 						DEBUG_IMX53_UART || \
 						DEBUG_IMX6Q_UART || \
-						DEBUG_IMX6SL_UART
+						DEBUG_IMX6SL_UART || \
+						DEBUG_IMX6SX_UART
 	default 1
 	depends on ARCH_MXC
 	help
 	  Choose UART port on which kernel low-level debug messages
 	  should be output.
 
+config DEBUG_VF_UART_PORT
+	int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART
+	default 1
+	range 0 3
+	depends on SOC_VF610
+	help
+	  Choose UART port on which kernel low-level debug messages
+	  should be output.
+
 config DEBUG_TEGRA_UART
 	bool
 	depends on ARCH_TEGRA
@@ -954,10 +988,6 @@ config DEBUG_STI_UART
 	bool
 	depends on ARCH_STI
 
-config DEBUG_MSM_UART
-	bool
-	depends on ARCH_MSM
-
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
@@ -974,9 +1004,11 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX51_UART || \
 				 DEBUG_IMX53_UART ||\
 				 DEBUG_IMX6Q_UART || \
-				 DEBUG_IMX6SL_UART
-	default "debug/msm.S" if DEBUG_MSM_UART
+				 DEBUG_IMX6SL_UART || \
+				 DEBUG_IMX6SX_UART
+	default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
+	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/sti.S" if DEBUG_STI_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
@@ -1014,7 +1046,6 @@ config DEBUG_UART_PHYS
 	default 0x02530c00 if DEBUG_KEYSTONE_UART0
 	default 0x02531000 if DEBUG_KEYSTONE_UART1
 	default 0x03010fe0 if ARCH_RPC
-	default 0x08108300 if DEBUG_DAVINCI_TNETV107X_UART1
 	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \
 				DEBUG_VEXPRESS_UART0_CA9
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
@@ -1023,6 +1054,7 @@ config DEBUG_UART_PHYS
 	default 0x101f1000 if ARCH_VERSATILE
 	default 0x101fb000 if DEBUG_NOMADIK_UART
 	default 0x16000000 if ARCH_INTEGRATOR
+	default 0x18000300 if DEBUG_BCM_5301X
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
 	default 0x20060000 if DEBUG_RK29_UART0
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
@@ -1033,12 +1065,19 @@ config DEBUG_UART_PHYS
 	default 0x40090000 if ARCH_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
 	default 0x42000000 if ARCH_GEMINI
+	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
+				DEBUG_S3C2410_UART0)
+	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
+				DEBUG_S3C2410_UART1)
+	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
+				DEBUG_S3C2410_UART2)
 	default 0x7c0003f8 if FOOTBRIDGE
-	default 0x80230000 if DEBUG_PICOXCELL_UART
 	default 0x80070000 if DEBUG_IMX23_UART
 	default 0x80074000 if DEBUG_IMX28_UART
+	default 0x80230000 if DEBUG_PICOXCELL_UART
 	default 0x808c0000 if ARCH_EP93XX
 	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
+	default 0xa9a00000 if DEBUG_MSM_UART
 	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
 	default 0xc0013000 if DEBUG_U300_UART
 	default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
@@ -1054,6 +1093,7 @@ config DEBUG_UART_PHYS
 				ARCH_ORION5X
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8b00000 if DEBUG_HI3716_UART
+	default 0xf991e000 if DEBUG_QCOM_UARTDM
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfe800000 if ARCH_IOP32X
 	default 0xffc02000 if DEBUG_SOCFPGA_UART
@@ -1062,15 +1102,18 @@ config DEBUG_UART_PHYS
 	default 0xfffff700 if ARCH_IOP33X
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_LL_UART_EFM32 || \
-		DEBUG_UART_8250 || DEBUG_UART_PL01X
+		DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
 	default 0xe0010fe0 if ARCH_RPC
+	default 0xe1000000 if DEBUG_MSM_UART
 	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf0009000 if DEBUG_CNS3XXX
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835
+	default 0xf1000300 if DEBUG_BCM_5301X
 	default 0xf11f1000 if ARCH_VERSATILE
 	default 0xf1600000 if ARCH_INTEGRATOR
 	default 0xf1c28000 if DEBUG_SUNXI_UART0
@@ -1078,9 +1121,16 @@ config DEBUG_UART_VIRT
 	default 0xf2100000 if DEBUG_PXA_UART1
 	default 0xf4090000 if ARCH_LPC32XX
 	default 0xf4200000 if ARCH_GEMINI
+	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
+				DEBUG_S3C2410_UART0)
+	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
+				DEBUG_S3C2410_UART1)
+	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
+				DEBUG_S3C2410_UART2)
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0xfa71e000 if DEBUG_QCOM_UARTDM
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
@@ -1099,28 +1149,28 @@ config DEBUG_UART_VIRT
 	default 0xfeb26000 if DEBUG_RK3X_UART1
 	default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
 	default 0xfeb31000 if DEBUG_KEYSTONE_UART1
-	default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
-	default 0xfed60000 if DEBUG_RK29_UART0
-	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
-	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0xfec02000 if DEBUG_SOCFPGA_UART
+	default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
 	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
 	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
 	default 0xfed12000 if ARCH_KIRKWOOD
+	default 0xfed60000 if DEBUG_RK29_UART0
+	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
+	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0xfedc0000 if ARCH_EP93XX
 	default 0xfee003f8 if FOOTBRIDGE
-	default 0xfee08300 if DEBUG_DAVINCI_TNETV107X_UART1
 	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xfef36000 if DEBUG_HIGHBANK_UART
 	default 0xfee82340 if ARCH_IOP13XX
 	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+	default 0xfef36000 if DEBUG_HIGHBANK_UART
 	default 0xfefff700 if ARCH_IOP33X
 	default 0xff003000 if DEBUG_U300_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
-		DEBUG_UART_8250 || DEBUG_UART_PL01X
+		DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
@@ -1135,7 +1185,7 @@ config DEBUG_UART_8250_WORD
 	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
 		ARCH_KEYSTONE || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
-		DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 || \
+		DEBUG_DAVINCI_DA8XX_UART2 || \
 		DEBUG_BCM_KONA_UART
 
 config DEBUG_UART_8250_FLOW_CONTROL
@@ -1145,7 +1195,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
 
 config DEBUG_UNCOMPRESS
 	bool
-	depends on ARCH_MULTIPLATFORM || ARCH_MSM
+	depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG
 	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
 	help
@@ -1161,7 +1211,8 @@ config DEBUG_UNCOMPRESS
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM
+	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
+					PLAT_SAMSUNG || ARCH_EFM32
 	default "mach/uncompress.h"
 
 config EARLY_PRINTK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 08a9ef58d9c3..6721fab13734 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -138,12 +138,13 @@ endif
 textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_AT91)		+= at91
+machine-$(CONFIG_ARCH_AXXIA)		+= axxia
 machine-$(CONFIG_ARCH_BCM)		+= bcm
-machine-$(CONFIG_ARCH_BCM2835)		+= bcm2835
 machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
 machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
@@ -180,6 +181,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
 machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
 machine-$(CONFIG_ARCH_PXA)		+= pxa
+machine-$(CONFIG_ARCH_QCOM)		+= qcom
 machine-$(CONFIG_ARCH_REALVIEW)		+= realview
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
@@ -199,7 +201,6 @@ machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
 machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
-machine-$(CONFIG_ARCH_VIRT)		+= virt
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
 machine-$(CONFIG_ARCH_W90X900)		+= w90x900
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
@@ -310,9 +311,9 @@ $(INSTALL_TARGETS):
 %.dtb: | scripts
 	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
 
-PHONY += dtbs
-dtbs: scripts
-	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs
+PHONY += dtbs dtbs_install
+dtbs dtbs_install: prepare scripts
+	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $@
 
 # We use MRPROPER_FILES and CLEAN_FILES now
 archclean:
@@ -331,6 +332,7 @@ define archhelp
   echo  '  bootpImage    - Combined zImage and initial RAM disk'
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
   echo  '* dtbs          - Build device tree blobs for enabled boards'
+  echo  '  dtbs_install  - Install dtbs to $(INSTALL_DTBS_PATH)'
   echo  '  install       - Install uncompressed kernel'
   echo  '  zinstall      - Install compressed kernel'
   echo  '  uinstall      - Install U-Boot wrapped compressed kernel'
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index d1153c8a765a..9448aa0c6686 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -7,6 +7,8 @@
 #define do_extend_cmdline 0
 #endif
 
+#define NR_BANKS 16
+
 static int node_offset(void *fdt, const char *node_path)
 {
 	int offset = fdt_path_offset(fdt, node_path);
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 066b03480b63..3a8b32df6b31 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -60,11 +60,6 @@
 		add	\rb, \rb, #0x00010000	@ Ser1
 #endif
 		.endm
-#elif defined(CONFIG_ARCH_S3C24XX)
-		.macro loadsp, rb, tmp
-		mov	\rb, #0x50000000
-		add	\rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
-		.endm
 #else
 		.macro	loadsp,	rb, tmp
 		addruart \rb, \tmp
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 032030361bef..5986ff63b901 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -12,6 +12,8 @@ dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
 dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
 dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
 dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
+# sam9261
+dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb
 # sam9263
 dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
@@ -29,6 +31,8 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
 # sam9n12
 dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
+# sam9rl
+dtb-$(CONFIG_ARCH_AT91) += at91sam9rlek.dtb
 # sam9x5
 dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb
@@ -46,20 +50,17 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d36ek.dtb
 
 dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
+dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \
-	bcm28155-ap.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
+	bcm21664-garnet.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2-sony-nsz-gs7.dtb	\
-	berlin2cd-google-chromecast.dtb
+	berlin2cd-google-chromecast.dtb	\
+	berlin2q-marvell-dmp.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
 	da850-evm.dtb
-dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
-	dove-cubox.dtb \
-	dove-d2plug.dtb \
-	dove-d3plug.dtb \
-	dove-dove-db.dtb
 dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
@@ -73,23 +74,43 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
+	exynos5260-xyref5260.dtb \
+	exynos5410-smdk5410.dtb \
 	exynos5420-arndale-octa.dtb \
+	exynos5420-peach-pit.dtb \
 	exynos5420-smdk5420.dtb \
 	exynos5440-sd5v1.dtb \
-	exynos5440-ssdk5440.dtb
+	exynos5440-ssdk5440.dtb \
+	exynos5800-peach-pi.dtb
 dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
 	ecx-2000.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
 	integratorcp.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
+dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
+	k2l-evm.dtb \
+	k2e-evm.dtb
+kirkwood := \
+	kirkwood-b3.dtb \
+	kirkwood-cloudbox.dtb \
 	kirkwood-db-88f6281.dtb \
 	kirkwood-db-88f6282.dtb \
 	kirkwood-dns320.dtb \
 	kirkwood-dns325.dtb \
 	kirkwood-dockstar.dtb \
 	kirkwood-dreamplug.dtb \
+	kirkwood-ds109.dtb \
+	kirkwood-ds110jv10.dtb \
+	kirkwood-ds111.dtb \
+	kirkwood-ds209.dtb \
+	kirkwood-ds210.dtb \
+	kirkwood-ds212.dtb \
+	kirkwood-ds212j.dtb \
+	kirkwood-ds409.dtb \
+	kirkwood-ds409slim.dtb \
+	kirkwood-ds411.dtb \
+	kirkwood-ds411j.dtb \
+	kirkwood-ds411slim.dtb \
 	kirkwood-goflexnet.dtb \
 	kirkwood-guruplug-server-plus.dtb \
 	kirkwood-ib62x0.dtb \
@@ -112,54 +133,81 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-nsa310a.dtb \
 	kirkwood-openblocks_a6.dtb \
 	kirkwood-openblocks_a7.dtb \
+	kirkwood-openrd-base.dtb \
+	kirkwood-openrd-client.dtb \
+	kirkwood-openrd-ultimate.dtb \
+	kirkwood-rd88f6192.dtb \
+	kirkwood-rd88f6281-a0.dtb \
+	kirkwood-rd88f6281-a1.dtb \
+	kirkwood-rs212.dtb \
+	kirkwood-rs409.dtb \
+	kirkwood-rs411.dtb \
 	kirkwood-sheevaplug.dtb \
 	kirkwood-sheevaplug-esata.dtb \
+	kirkwood-t5325.dtb \
 	kirkwood-topkick.dtb \
 	kirkwood-ts219-6281.dtb \
-	kirkwood-ts219-6282.dtb
+	kirkwood-ts219-6282.dtb \
+	kirkwood-ts419-6281.dtb \
+	kirkwood-ts419-6282.dtb
+dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood)
+dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood)
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
 dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
 dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
-	qcom-msm8960-cdp.dtb \
-	qcom-apq8074-dragonboard.dtb
-dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
-	armada-370-mirabox.dtb \
-	armada-370-netgear-rn102.dtb \
-	armada-370-netgear-rn104.dtb \
-	armada-370-rd.dtb \
-	armada-xp-axpwifiap.dtb \
-	armada-xp-db.dtb \
-	armada-xp-gp.dtb \
-	armada-xp-netgear-rn2120.dtb \
-	armada-xp-matrix.dtb \
-	armada-xp-openblocks-ax3-4.dtb
 dtb-$(CONFIG_ARCH_MXC) += \
+	imx25-eukrea-mbimxsd25-baseboard.dtb \
 	imx25-karo-tx25.dtb \
 	imx25-pdk.dtb \
 	imx27-apf27.dtb \
 	imx27-apf27dev.dtb \
 	imx27-pdk.dtb \
-	imx27-phytec-phycore-som.dtb \
 	imx27-phytec-phycore-rdk.dtb \
-	imx27-phytec-phycard-s-som.dtb \
 	imx27-phytec-phycard-s-rdk.dtb \
 	imx31-bug.dtb \
+	imx35-eukrea-mbimxsd35-baseboard.dtb \
+	imx35-pdk.dtb \
+	imx50-evk.dtb \
 	imx51-apf51.dtb \
 	imx51-apf51dev.dtb \
 	imx51-babbage.dtb \
+	imx51-digi-connectcore-jsk.dtb \
+	imx51-eukrea-mbimxsd51-baseboard.dtb \
 	imx53-ard.dtb \
-	imx53-evk.dtb \
 	imx53-m53evk.dtb \
 	imx53-mba53.dtb \
 	imx53-qsb.dtb \
+	imx53-qsrb.dtb \
 	imx53-smd.dtb \
+	imx53-tx53-x03x.dtb \
+	imx53-tx53-x13x.dtb \
+	imx53-voipac-bsb.dtb \
 	imx6dl-cubox-i.dtb \
+	imx6dl-dfi-fs700-m60.dtb \
+	imx6dl-gw51xx.dtb \
+	imx6dl-gw52xx.dtb \
+	imx6dl-gw53xx.dtb \
+	imx6dl-gw54xx.dtb \
 	imx6dl-hummingboard.dtb \
+	imx6dl-nitrogen6x.dtb \
+	imx6dl-phytec-pbab01.dtb \
+	imx6dl-riotboard.dtb \
 	imx6dl-sabreauto.dtb \
+	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \
 	imx6dl-wandboard.dtb \
 	imx6q-arm2.dtb \
+	imx6q-cm-fx6.dtb \
 	imx6q-cubox-i.dtb \
+	imx6q-dfi-fs700-m60.dtb \
+	imx6q-dmo-edmqmx6.dtb \
+	imx6q-gk802.dtb \
+	imx6q-gw51xx.dtb \
+	imx6q-gw52xx.dtb \
+	imx6q-gw53xx.dtb \
+	imx6q-gw5400-a.dtb \
+	imx6q-gw54xx.dtb \
+	imx6q-nitrogen6x.dtb \
 	imx6q-phytec-pbab01.dtb \
 	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \
@@ -168,6 +216,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-udoo.dtb \
 	imx6q-wandboard.dtb \
 	imx6sl-evk.dtb \
+	vf610-colibri.dtb \
 	vf610-cosmic.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
@@ -183,6 +232,9 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-cfa10056.dtb \
 	imx28-cfa10057.dtb \
 	imx28-cfa10058.dtb \
+	imx28-duckbill.dtb \
+	imx28-eukrea-mbmx283lc.dtb \
+	imx28-eukrea-mbmx287lc.dtb \
 	imx28-evk.dtb \
 	imx28-m28cu3.dtb \
 	imx28-m28evk.dtb \
@@ -192,61 +244,84 @@ dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
 dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
 	nspire-tp.dtb \
 	nspire-clp.dtb
-dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
-	omap2430-sdp.dtb \
+dtb-$(CONFIG_ARCH_OMAP2) += omap2420-h4.dtb \
 	omap2420-n800.dtb \
 	omap2420-n810.dtb \
 	omap2420-n810-wimax.dtb \
+	omap2430-sdp.dtb
+dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \
+	am3517-evm.dtb \
+	am3517_mt_ventoux.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-xm.dtb \
+	omap3-beagle-xm-ab.dtb \
+	omap3-cm-t3517.dtb \
+	omap3-cm-t3530.dtb \
 	omap3-cm-t3730.dtb \
-	omap3-sbc-t3730.dtb \
 	omap3-devkit8000.dtb \
-	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-evm-37xx.dtb \
+	omap3-gta04.dtb \
+	omap3-igep0020.dtb \
+	omap3-igep0030.dtb \
 	omap3-ldp.dtb \
+	omap3-lilly-dbb056.dtb \
 	omap3-n900.dtb \
 	omap3-n9.dtb \
 	omap3-n950.dtb \
-	omap3-overo-tobi.dtb \
+	omap3-overo-alto35.dtb \
+	omap3-overo-chestnut43.dtb \
+	omap3-overo-gallop43.dtb \
+	omap3-overo-palo43.dtb \
+	omap3-overo-storm-alto35.dtb \
+	omap3-overo-storm-chestnut43.dtb \
+	omap3-overo-storm-gallop43.dtb \
+	omap3-overo-storm-palo43.dtb \
+	omap3-overo-storm-summit.dtb \
 	omap3-overo-storm-tobi.dtb \
-	omap3-gta04.dtb \
-	omap3-igep0020.dtb \
-	omap3-igep0030.dtb \
-	omap3-zoom3.dtb \
+	omap3-overo-summit.dtb \
+	omap3-overo-tobi.dtb \
+	omap3-sbc-t3517.dtb \
+	omap3-sbc-t3530.dtb \
+	omap3-sbc-t3730.dtb \
+	omap3-zoom3.dtb
+dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \
+	am335x-bone.dtb \
+	am335x-boneblack.dtb \
+	am335x-evm.dtb \
+	am335x-evmsk.dtb \
+	am335x-nano.dtb
+dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
-	omap4-var-som.dtb \
 	omap4-sdp.dtb \
 	omap4-sdp-es23plus.dtb \
-	omap5-uevm.dtb \
-	am335x-evm.dtb \
-	am335x-evmsk.dtb \
-	am335x-bone.dtb \
-	am335x-boneblack.dtb \
-	am335x-nano.dtb \
-	am335x-base0033.dtb \
-	am3517-evm.dtb \
-	am3517_mt_ventoux.dtb \
-	am43x-epos-evm.dtb \
-	dra7-evm.dtb
-dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
+	omap4-var-dvk-om44.dtb \
+	omap4-var-stk-om44.dtb
+dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \
+	am437x-gp-evm.dtb
+dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \
+	omap5-sbc-t54.dtb \
+	omap5-uevm.dtb
+dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \
+	dra72-evm.dtb
+dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
+	orion5x-lacie-ethernet-disk-mini-v2.dtb \
+	orion5x-maxtor-shared-storage-2.dtb \
+	orion5x-rd88f5182-nas.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
-	ste-hrefprev60-stuib.dtb \
-	ste-hrefprev60-tvk.dtb \
-	ste-hrefv60plus-stuib.dtb \
-	ste-hrefv60plus-tvk.dtb \
-	ste-ccu8540.dtb \
-	ste-ccu9540.dtb
+dtb-$(CONFIG_ARCH_QCOM) += \
+	qcom-apq8064-ifc6410.dtb \
+	qcom-apq8074-dragonboard.dtb \
+	qcom-apq8084-mtp.dtb \
+	qcom-msm8660-surf.dtb \
+	qcom-msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
 	s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
-	r7s72100-genmai.dtb \
-	r7s72100-genmai-reference.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7778-bockw-reference.dtb \
@@ -261,12 +336,14 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
 	r8a73a4-ape6evm-reference.dtb \
 	sh7372-mackerel.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
-	r7s72100-genmai-reference.dtb \
+	r7s72100-genmai.dtb \
+	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
 	r8a7790-lager.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
 	socfpga_cyclone5_socdk.dtb \
 	socfpga_cyclone5_sockit.dtb \
+	socfpga_cyclone5_socrates.dtb \
 	socfpga_vt.dtb
 dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
 	spear1340-evb.dtb
@@ -275,21 +352,33 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
 	spear320-evb.dtb \
 	spear320-hmi.dtb
 dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \
-	stih416-b2000.dtb \
+dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
+	stih415-b2000.dtb \
 	stih415-b2020.dtb \
-	stih416-b2020.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += \
+	stih416-b2000.dtb \
+	stih416-b2020.dtb \
+	stih416-b2020-revE.dtb
+dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-cubieboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-hackberry.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
 	sun5i-a13-olinuxino.dtb \
-	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-olinuxino-micro.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
 	sun6i-a31-colombus.dtb \
+	sun6i-a31-m9.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-i12-tvbox.dtb \
 	sun7i-a20-olinuxino-micro.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
@@ -304,11 +393,22 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
+	tegra30-colibri-eval-v3.dtb \
 	tegra114-dalmore.dtb \
+	tegra114-roth.dtb \
+	tegra114-tn7.dtb \
+	tegra124-jetson-tk1.dtb \
 	tegra124-venice2.dtb
+dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
+dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
+	ste-hrefprev60-stuib.dtb \
+	ste-hrefprev60-tvk.dtb \
+	ste-hrefv60plus-stuib.dtb \
+	ste-hrefv60plus-tvk.dtb \
+	ste-ccu8540.dtb \
+	ste-ccu9540.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
 	versatile-pb.dtb
-dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
 	vexpress-v2p-ca9.dtb \
 	vexpress-v2p-ca15-tc1.dtb \
@@ -322,8 +422,31 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
 	zynq-zc706.dtb \
 	zynq-zed.dtb
+dtb-$(CONFIG_MACH_ARMADA_370) += \
+	armada-370-db.dtb \
+	armada-370-mirabox.dtb \
+	armada-370-netgear-rn102.dtb \
+	armada-370-netgear-rn104.dtb \
+	armada-370-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_375) += \
+	armada-375-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_38X) += \
+	armada-385-db.dtb \
+	armada-385-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_XP) += \
+	armada-xp-axpwifiap.dtb \
+	armada-xp-db.dtb \
+	armada-xp-gp.dtb \
+	armada-xp-netgear-rn2120.dtb \
+	armada-xp-matrix.dtb \
+	armada-xp-openblocks-ax3-4.dtb
+dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
+	dove-cubox.dtb \
+	dove-d2plug.dtb \
+	dove-d3plug.dtb \
+	dove-dove-db.dtb
 
-targets += dtbs
+targets += dtbs dtbs_install
 targets += $(dtb-y)
 endif
 
@@ -333,3 +456,5 @@ dtbs: $(addprefix $(obj)/, $(dtb-y))
 	$(Q)rm -f $(obj)/../*.dtb
 
 clean-files := *.dtb
+
+dtbs_install: $(addsuffix _dtbinst_, $(dtb-y))
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index e3f27ec31718..bde1777b62be 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -182,31 +182,31 @@
 
 &usb {
 	status = "okay";
+};
 
-	control@44e10000 {
-		status = "okay";
-	};
+&usb_ctrl_mod {
+	status = "okay";
+};
 
-	usb-phy@47401300 {
-		status = "okay";
-	};
+&usb0_phy {
+	status = "okay";
+};
 
-	usb-phy@47401b00 {
-		status = "okay";
-	};
+&usb1_phy {
+	status = "okay";
+};
 
-	usb@47401000 {
-		status = "okay";
-	};
+&usb0 {
+	status = "okay";
+};
 
-	usb@47401800 {
-		status = "okay";
-		dr_mode = "host";
-	};
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
 
-	dma-controller@07402000  {
-		status = "okay";
-	};
+&cppi41dma  {
+	status = "okay";
 };
 
 &i2c0 {
@@ -280,13 +280,14 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-
+	status = "okay";
 };
 
 &davinci_mdio {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
 };
 
 &mmc1 {
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 6b71ad95a5cf..305975d3f531 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -26,7 +26,6 @@
 	pinctrl-0 = <&emmc_pins>;
 	bus-width = <8>;
 	status = "okay";
-	ti,vcc-aux-disable-is-sleep;
 };
 
 &am33xx_pinmux {
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 7e6c64ed966d..ecb267767cf5 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -260,43 +260,49 @@
 		>;
 	};
 
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
 	lcd_pins_s0: lcd_pins_s0 {
 		pinctrl-single,pins = <
-			0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
-			0x24 0x01	/* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
-			0x28 0x01	/* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
-			0x2c 0x01	/* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
-			0x30 0x01	/* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
-			0x34 0x01	/* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
-			0x38 0x01	/* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
-			0x3c 0x01	/* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
-			0xa0 0x00	/* lcd_data0.lcd_data0, OUTPUT | MODE0 */
-			0xa4 0x00	/* lcd_data1.lcd_data1, OUTPUT | MODE0 */
-			0xa8 0x00	/* lcd_data2.lcd_data2, OUTPUT | MODE0 */
-			0xac 0x00	/* lcd_data3.lcd_data3, OUTPUT | MODE0 */
-			0xb0 0x00	/* lcd_data4.lcd_data4, OUTPUT | MODE0 */
-			0xb4 0x00	/* lcd_data5.lcd_data5, OUTPUT | MODE0 */
-			0xb8 0x00	/* lcd_data6.lcd_data6, OUTPUT | MODE0 */
-			0xbc 0x00	/* lcd_data7.lcd_data7, OUTPUT | MODE0 */
-			0xc0 0x00	/* lcd_data8.lcd_data8, OUTPUT | MODE0 */
-			0xc4 0x00	/* lcd_data9.lcd_data9, OUTPUT | MODE0 */
-			0xc8 0x00	/* lcd_data10.lcd_data10, OUTPUT | MODE0 */
-			0xcc 0x00	/* lcd_data11.lcd_data11, OUTPUT | MODE0 */
-			0xd0 0x00	/* lcd_data12.lcd_data12, OUTPUT | MODE0 */
-			0xd4 0x00	/* lcd_data13.lcd_data13, OUTPUT | MODE0 */
-			0xd8 0x00	/* lcd_data14.lcd_data14, OUTPUT | MODE0 */
-			0xdc 0x00	/* lcd_data15.lcd_data15, OUTPUT | MODE0 */
-			0xe0 0x00	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
-			0xe4 0x00	/* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
-			0xe8 0x00	/* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
-			0xec 0x00	/* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
+			0x24 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
+			0x28 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
+			0x2c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
+			0x30 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
+			0x34 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
+			0x38 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
+			0x3c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
+			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
+			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
+			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
+			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
+			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
+			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
+			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
+			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
+			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
+			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
+			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
+			0xe0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
+			0xe4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
+			0xe8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
+			0xec (PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
 		>;
 	};
 
 	am335x_evm_audio_pins: am335x_evm_audio_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
 			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 		>;
@@ -324,31 +330,31 @@
 
 &usb {
 	status = "okay";
+};
 
-	control@44e10000 {
-		status = "okay";
-	};
+&usb_ctrl_mod {
+	status = "okay";
+};
 
-	usb-phy@47401300 {
-		status = "okay";
-	};
+&usb0_phy {
+	status = "okay";
+};
 
-	usb-phy@47401b00 {
-		status = "okay";
-	};
+&usb1_phy {
+	status = "okay";
+};
 
-	usb@47401000 {
-		status = "okay";
-	};
+&usb0 {
+	status = "okay";
+};
 
-	usb@47401800 {
-		status = "okay";
-		dr_mode = "host";
-	};
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
 
-	dma-controller@07402000  {
-		status = "okay";
-	};
+&cppi41dma  {
+	status = "okay";
 };
 
 &i2c1 {
@@ -434,9 +440,9 @@
 	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
 	nand@0,0 {
 		reg = <0 0 0>; /* CS0, offset 0 */
-		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
-		gpmc,device-nand = "true";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
 		gpmc,device-width = <1>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
@@ -460,50 +466,51 @@
 		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
-
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
-
-		/* MTD partition table */
 		partition@0 {
-			label = "SPL1";
+			label = "NAND.SPL";
 			reg = <0x00000000 0x000020000>;
 		};
-
 		partition@1 {
-			label = "SPL2";
+			label = "NAND.SPL.backup1";
 			reg = <0x00020000 0x00020000>;
 		};
-
 		partition@2 {
-			label = "SPL3";
+			label = "NAND.SPL.backup2";
 			reg = <0x00040000 0x00020000>;
 		};
-
 		partition@3 {
-			label = "SPL4";
+			label = "NAND.SPL.backup3";
 			reg = <0x00060000 0x00020000>;
 		};
-
 		partition@4 {
-			label = "U-boot";
-			reg = <0x00080000 0x001e0000>;
+			label = "NAND.u-boot-spl";
+			reg = <0x00080000 0x00040000>;
 		};
-
 		partition@5 {
-			label = "environment";
-			reg = <0x00260000 0x00020000>;
+			label = "NAND.u-boot";
+			reg = <0x000C0000 0x00100000>;
 		};
-
 		partition@6 {
-			label = "Kernel";
-			reg = <0x00280000 0x00500000>;
+			label = "NAND.u-boot-env";
+			reg = <0x001C0000 0x00020000>;
 		};
-
 		partition@7 {
-			label = "File-System";
-			reg = <0x00780000 0x0F880000>;
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x001E0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00A00000 0x0F600000>;
 		};
 	};
 };
@@ -607,12 +614,14 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
 };
 
 &davinci_mdio {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
 };
 
 &cpsw_emac0 {
@@ -643,6 +652,9 @@
 	status = "okay";
 	vmmc-supply = <&vmmc_reg>;
 	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 };
 
 &sham {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 486880b74831..ab9a34ce524c 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -45,6 +45,29 @@
 		regulator-boot-on;
 	};
 
+	wl12xx_vmmc: fixedregulator@2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 29 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
 	leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_s0>;
@@ -270,6 +293,24 @@
 			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 		>;
 	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+		>;
+	};
 };
 
 &uart0 {
@@ -333,18 +374,31 @@
 
 &usb {
 	status = "okay";
+};
 
-	control@44e10000 {
-		status = "okay";
-	};
+&usb_ctrl_mod {
+	status = "okay";
+};
 
-	usb-phy@47401300 {
-		status = "okay";
-	};
+&usb0_phy {
+	status = "okay";
+};
 
-	usb@47401000 {
-		status = "okay";
-	};
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
 };
 
 &epwmss2 {
@@ -440,22 +494,27 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+	status = "okay";
 };
 
 &davinci_mdio {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
 };
 
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
 	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy_id = <&davinci_mdio>, <1>;
 	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <2>;
 };
 
 &mmc1 {
@@ -479,6 +538,16 @@
 	ti,no-reset-on-init;
 };
 
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&wl12xx_vmmc>;
+	ti,non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+
 &mcasp1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&mcasp1_pins>;
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index 7063311a58d9..8a0a72dc7dd7 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -95,6 +95,14 @@
 	};
 };
 
+&mac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
 };
@@ -118,7 +126,6 @@
 		reg = <0 0 0>; /* CS0, offset 0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
-		gpmc,device-nand = "true";
 		gpmc,device-width = <1>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
@@ -201,31 +208,31 @@
 
 &usb {
 	status = "okay";
+};
 
-	control@44e10000 {
-		status = "okay";
-	};
+&usb_ctrl_mod {
+	status = "okay";
+};
 
-	usb-phy@47401300 {
-		status = "okay";
-	};
+&usb0_phy {
+	status = "okay";
+};
 
-	usb-phy@47401b00 {
-		status = "okay";
-	};
+&usb1_phy {
+	status = "okay";
+};
 
-	usb@47401000 {
-		status = "okay";
-	};
+&usb0 {
+	status = "okay";
+};
 
-	usb@47401800 {
-		status = "okay";
-		dr_mode = "host";
-	};
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
 
-	dma-controller@07402000  {
-		status = "okay";
-	};
+&cppi41dma  {
+	status = "okay";
 };
 
 #include "tps65910.dtsi"
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 9907b494b99c..a3466455b171 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -344,6 +344,11 @@
 
 &mac {
 	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
 };
 
 &cpsw_emac0 {
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
index 9ccfe508dea2..712edce7d6fb 100644
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -96,47 +96,29 @@
 		clock-div = <1>;
 	};
 
-	ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk {
+	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
 		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
+		compatible = "ti,gate-clock";
 		clocks = <&dpll_per_m2_ck>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm0_tbclk: ehrpwm0_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ehrpwm0_gate_tbclk>;
-	};
-
-	ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk {
+	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
 		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
+		compatible = "ti,gate-clock";
 		clocks = <&dpll_per_m2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm1_tbclk: ehrpwm1_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ehrpwm1_gate_tbclk>;
-	};
-
-	ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk {
+	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
 		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
+		compatible = "ti,gate-clock";
 		clocks = <&dpll_per_m2_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ehrpwm2_gate_tbclk>;
-	};
 };
 &prcm_clocks {
 	clk_32768_ck: clk_32768_ck {
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 6d95d3df33c7..9f53e824b037 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -58,6 +58,10 @@
 				275000  1125000
 			>;
 			voltage-tolerance = <2>; /* 2 percentage */
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
 			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
@@ -68,7 +72,7 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is uses for IPs
+	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
 	 */
 	soc {
@@ -90,8 +94,8 @@
 
 	/*
 	 * XXX: Use a flat representation of the AM33XX interconnect.
-	 * The real AM33XX interconnect network is quite complex.Since
-	 * that will not bring real advantage to represent that in DT
+	 * The real AM33XX interconnect network is quite complex. Since
+	 * it will not bring real advantage to represent that in DT
 	 * for the moment, just use a fake OCP bus entry to represent
 	 * the whole bus hierarchy.
 	 */
@@ -140,12 +144,9 @@
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
 			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
+				<0x44e10f90 0x40>;
 			interrupts = <12 13 14>;
 			#dma-cells = <1>;
-			dma-channels = <64>;
-			ti,edma-regions = <4>;
-			ti,edma-slots = <256>;
 		};
 
 		gpio0: gpio@44e07000 {
@@ -318,6 +319,7 @@
 			compatible = "ti,omap4-hwspinlock";
 			reg = <0x480ca000 0x1000>;
 			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
 		};
 
 		wdt2: wdt@44e35000 {
@@ -399,7 +401,7 @@
 			ti,timer-pwm;
 		};
 
-		rtc@44e3e000 {
+		rtc: rtc@44e3e000 {
 			compatible = "ti,da830-rtc";
 			reg = <0x44e3e000 0x1000>;
 			interrupts = <75
@@ -448,7 +450,7 @@
 			ti,hwmods = "usb_otg_hs";
 			status = "disabled";
 
-			usb_ctrl_mod: control@44e10000 {
+			usb_ctrl_mod: control@44e10620 {
 				compatible = "ti,am335x-usb-ctrl-module";
 				reg = <0x44e10620 0x10
 					0x44e10648 0x4>;
@@ -551,7 +553,7 @@
 					"tx14", "tx15";
 			};
 
-			cppi41dma: dma-controller@07402000 {
+			cppi41dma: dma-controller@47402000 {
 				compatible = "ti,am3359-cppi41";
 				reg =  <0x47400000 0x1000
 					0x47402000 0x1000
@@ -582,6 +584,8 @@
 				compatible = "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48300100 0x80>;
+				interrupts = <31>;
+				interrupt-names = "ecap0";
 				ti,hwmods = "ecap0";
 				status = "disabled";
 			};
@@ -610,6 +614,8 @@
 				compatible = "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48302100 0x80>;
+				interrupts = <47>;
+				interrupt-names = "ecap1";
 				ti,hwmods = "ecap1";
 				status = "disabled";
 			};
@@ -638,6 +644,8 @@
 				compatible = "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48304100 0x80>;
+				interrupts = <61>;
+				interrupt-names = "ecap2";
 				ti,hwmods = "ecap2";
 				status = "disabled";
 			};
@@ -677,6 +685,7 @@
 			 */
 			interrupts = <40 41 42 43>;
 			ranges;
+			status = "disabled";
 
 			davinci_mdio: mdio@4a101000 {
 				compatible = "ti,davinci_mdio";
@@ -685,6 +694,7 @@
 				ti,hwmods = "davinci_mdio";
 				bus_freq = <1000000>;
 				reg = <0x4a101000 0x100>;
+				status = "disabled";
 			};
 
 			cpsw_emac0: slave@4a100200 {
@@ -791,7 +801,7 @@
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <80>, <81>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8>,
 				<&edma 9>;
@@ -805,7 +815,7 @@
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <82>, <83>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10>,
 				<&edma 11>;
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
new file mode 100644
index 000000000000..2d40b3f241cd
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -0,0 +1,174 @@
+/*
+ * See craneboard.org for more details
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+
+/ {
+	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
+	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&davinci_emac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&mmc1 {
+	vmmc-supply = <&vdd2_reg>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&mmc3 {
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+#include "tps65910.dtsi"
+
+&omap3_pmx_core {
+	tps_pins: pinmux_tps_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
+		>;
+	};
+};
+
+&tps {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tps_pins>;
+
+	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	interrupt-parent = <&intc>;
+
+	ti,en-ck32k-xtal;
+
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		/*
+		 * Unused:
+		 * VDIG1=2.7V,300mA max
+		 * VDIG2=1.8V,300mA max
+		 */
+
+		vpll_reg: regulator@7 {
+			/* VDDS_DPLL_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			/* VDDS_SRAM_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			/* VDDA1P8V_USBPHY */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		/* VAUX33 unused */
+
+		vdac_reg: regulator@8 {
+			/* VDDA_DAC_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			/* VDDA3P3V_USBPHY */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_CORE */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDDSHV_3V3 */
+			regulator-name = "vdd_shv";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		/* VDD3 unused */
+	};
+};
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 788391f91684..5a452fdd7c5d 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -62,5 +62,21 @@
 	};
 };
 
+&iva {
+	status = "disabled";
+};
+
+&mailbox {
+	status = "disabled";
+};
+
+&mmu_isp {
+	status = "disabled";
+};
+
+&smartreflex_mpu_iva {
+	status = "disabled";
+};
+
 /include/ "am35xx-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index c6bd4d986c29..db464d7eaca8 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -8,6 +8,7 @@
  * kind, whether express or implied.
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 #include "skeleton.dtsi"
@@ -33,6 +34,11 @@
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 
@@ -61,11 +67,15 @@
 	};
 
 	ocp {
-		compatible = "simple-bus";
+		compatible = "ti,am4372-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		ti,hwmods = "l3_main";
+		reg = <0x44000000 0x400000
+		       0x44800000 0x400000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
 		prcm: prcm@44df0000 {
 			compatible = "ti,am4-prcm";
@@ -102,9 +112,6 @@
 					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			dma-channels = <64>;
-			ti,edma-regions = <4>;
-			ti,edma-slots = <256>;
 		};
 
 		uart0: serial@44e09000 {
@@ -351,6 +358,13 @@
 			status = "disabled";
 		};
 
+		hwspinlock: spinlock@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x1000>;
+			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
+		};
+
 		i2c0: i2c@44e0b000 {
 			compatible = "ti,am4372-i2c","ti,omap4-i2c";
 			reg = <0x44e0b000 0x1000>;
@@ -508,6 +522,12 @@
 				/* Filled in by U-Boot */
 				mac-address = [ 00 00 00 00 00 00 ];
 			};
+
+			phy_sel: cpsw-phy-sel@44e10650 {
+				compatible = "ti,am43xx-cpsw-phy-sel";
+				reg= <0x44e10650 0x4>;
+				reg-names = "gmii-sel";
+			};
 		};
 
 		epwmss0: epwmss@48300000 {
@@ -521,6 +541,7 @@
 
 			ecap0: ecap@48300100 {
 				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
 				reg = <0x48300100 0x80>;
 				ti,hwmods = "ecap0";
 				status = "disabled";
@@ -528,6 +549,7 @@
 
 			ehrpwm0: ehrpwm@48300200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
 				reg = <0x48300200 0x80>;
 				ti,hwmods = "ehrpwm0";
 				status = "disabled";
@@ -545,6 +567,7 @@
 
 			ecap1: ecap@48302100 {
 				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
 				reg = <0x48302100 0x80>;
 				ti,hwmods = "ecap1";
 				status = "disabled";
@@ -552,6 +575,7 @@
 
 			ehrpwm1: ehrpwm@48302200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
 				reg = <0x48302200 0x80>;
 				ti,hwmods = "ehrpwm1";
 				status = "disabled";
@@ -569,6 +593,7 @@
 
 			ecap2: ecap@48304100 {
 				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
 				reg = <0x48304100 0x80>;
 				ti,hwmods = "ecap2";
 				status = "disabled";
@@ -576,6 +601,7 @@
 
 			ehrpwm2: ehrpwm@48304200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
 				reg = <0x48304200 0x80>;
 				ti,hwmods = "ehrpwm2";
 				status = "disabled";
@@ -593,6 +619,7 @@
 
 			ehrpwm3: ehrpwm@48306200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
 				reg = <0x48306200 0x80>;
 				ti,hwmods = "ehrpwm3";
 				status = "disabled";
@@ -610,6 +637,7 @@
 
 			ehrpwm4: ehrpwm@48308200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
 				reg = <0x48308200 0x80>;
 				ti,hwmods = "ehrpwm4";
 				status = "disabled";
@@ -627,6 +655,7 @@
 
 			ehrpwm5: ehrpwm@4830a200 {
 				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
 				reg = <0x4830a200 0x80>;
 				ti,hwmods = "ehrpwm5";
 				status = "disabled";
@@ -669,7 +698,7 @@
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <80>, <81>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8>,
 			       <&edma 9>;
@@ -683,12 +712,180 @@
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <82>, <83>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10>,
 			       <&edma 11>;
 			dma-names = "tx", "rx";
 		};
+
+		elm: elm@48080000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48080000 0x2000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "elm";
+			clocks = <&l4ls_gclk>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			clocks = <&l3s_gclk>;
+			clock-names = "fck";
+			reg = <0x50000000 0x2000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		am43xx_control_usb2phy1: control-phy@44e10620 {
+			compatible = "ti,control-phy-usb2-am437";
+			reg = <0x44e10620 0x4>;
+			reg-names = "power";
+		};
+
+		am43xx_control_usb2phy2: control-phy@0x44e10628 {
+			compatible = "ti,control-phy-usb2-am437";
+			reg = <0x44e10628 0x4>;
+			reg-names = "power";
+		};
+
+		ocp2scp0: ocp2scp@483a8000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp0";
+
+			usb2_phy1: phy@483a8000 {
+				compatible = "ti,am437x-usb2";
+				reg = <0x483a8000 0x8000>;
+				ctrl-module = <&am43xx_control_usb2phy1>;
+				clocks = <&usb_phy0_always_on_clk32k>,
+					 <&usb_otg_ss0_refclk960m>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		ocp2scp1: ocp2scp@483e8000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp1";
+
+			usb2_phy2: phy@483e8000 {
+				compatible = "ti,am437x-usb2";
+				reg = <0x483e8000 0x8000>;
+				ctrl-module = <&am43xx_control_usb2phy2>;
+				clocks = <&usb_phy1_always_on_clk32k>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dwc3_1: omap_dwc3@48380000 {
+			compatible = "ti,am437x-dwc3";
+			ti,hwmods = "usb_otg_ss0";
+			reg = <0x48380000 0x10000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <1>;
+			ranges;
+
+			usb1: usb@48390000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x48390000 0x17000>;
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				status = "disabled";
+			};
+		};
+
+		dwc3_2: omap_dwc3@483c0000 {
+			compatible = "ti,am437x-dwc3";
+			ti,hwmods = "usb_otg_ss1";
+			reg = <0x483c0000 0x10000>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <1>;
+			ranges;
+
+			usb2: usb@483d0000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x483d0000 0x17000>;
+				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy2>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				status = "disabled";
+			};
+		};
+
+		qspi: qspi@47900000 {
+			compatible = "ti,am4372-qspi";
+			reg = <0x47900000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "qspi";
+			interrupts = <0 138 0x4>;
+			num-cs = <4>;
+			status = "disabled";
+		};
+
+		hdq: hdq@48347000 {
+			compatible = "ti,am43xx-hdq";
+			reg = <0x48347000 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&func_12m_clk>;
+			clock-names = "fck";
+			ti,hwmods = "hdq1w";
+			status = "disabled";
+		};
+
+		dss: dss@4832a000 {
+			compatible = "ti,omap3-dss";
+			reg = <0x4832a000 0x200>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&disp_clk>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@4832a400 {
+				compatible = "ti,omap3-dispc";
+				reg = <0x4832a400 0x400>;
+				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+			};
+
+			rfbi: rfbi@4832a800 {
+				compatible = "ti,omap3-rfbi";
+				reg = <0x4832a800 0x100>;
+				ti,hwmods = "dss_rfbi";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
new file mode 100644
index 000000000000..003766c47bbf
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -0,0 +1,458 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM437x GP EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "TI AM437x GP EVM";
+	compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	vmmcsd_fixed: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
+				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
+				&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
+
+		col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
+				&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
+
+		linux,keymap = <0x00000201      /* P1 */
+				0x00010202      /* P2 */
+				0x01000067      /* UP */
+				0x0101006a      /* RIGHT */
+				0x02000069      /* LEFT */
+				0x0201006c>;      /* DOWN */
+		};
+
+	lcd0: display {
+		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		/*
+		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
+		 * panel's enable GPIO, but we don't have HDMI driver support nor
+		 * support to switch between two displays, so using this gpio as
+		 * panel's enable should be safe.
+		 */
+		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <210>;
+			hback-porch = <16>;
+			hsync-len = <30>;
+			vback-porch = <10>;
+			vfront-porch = <22>;
+			vsync-len = <13>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+&am43xx_pinmux {
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+		>;
+	};
+
+	pixcir_ts_pins: pixcir_ts_pins {
+		pinctrl-single,pins = <
+			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	nand_flash_x8: nand_flash_x8 {
+		pinctrl-single,pins = <
+			0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* spi2_cs0.gpio/eMMCorNANDsel */
+			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	dss_pins: dss_pins {
+		pinctrl-single,pins = <
+			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+		>;
+	};
+
+	lcd_pins: lcd_pins {
+		pinctrl-single,pins = <
+			/* GPIO 5_8 to select LCD / HDMI */
+			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+        status = "okay";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+        status = "okay";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2c1_pins>;
+
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pixcir_ts_pins>;
+		reg = <0x5c>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+
+		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+
+		x-size = <1024>;
+		y-size = <600>;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+	ti,no-reset-on-init;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		reg = <0 0 4>;		/* device IO registers */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>;
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <25>;
+		gpmc,adv-wr-off-ns = <25>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <3>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,wait-pin = <0>;
+		gpmc,wait-on-read;
+		gpmc,wait-on-write;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x00040000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00040000 0x00040000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x000c0000 0x00040000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x00180000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x00280000 0x00040000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x002c0000 0x00040000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00300000 0x00700000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x1f600000>;
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index fbf9c4c7a94f..19f1f7e87597 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -13,11 +13,16 @@
 #include "am4372.dtsi"
 #include <dt-bindings/pinctrl/am43xx.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "TI AM43x EPOS EVM";
 	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
 
+	aliases {
+		display0 = &lcd0;
+	};
+
 	vmmcsd_fixed: fixedregulator-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -26,6 +31,44 @@
 		enable-active-high;
 	};
 
+	lcd0: display {
+		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		/*
+		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
+		 * panel's enable GPIO, but we don't have HDMI driver support nor
+		 * support to switch between two displays, so using this gpio as
+		 * panel's enable should be safe.
+		 */
+		enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <210>;
+			hback-porch = <16>;
+			hsync-len = <30>;
+			vback-porch = <10>;
+			vfront-porch = <22>;
+			vsync-len = <13>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
 	am43xx_pinmux: pinmux@44e10800 {
 		cpsw_default: cpsw_default {
 			pinctrl-single,pins = <
@@ -79,6 +122,127 @@
 				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 			>;
 		};
+
+		nand_flash_x8: nand_flash_x8 {
+			pinctrl-single,pins = <
+				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
+				0x0  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+				0x4  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+				0x8  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+				0xc  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+				0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+				0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+				0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+				0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+				0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			>;
+		};
+
+		ecap0_pins: backlight_pins {
+			pinctrl-single,pins = <
+				0x164 MUX_MODE0         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			>;
+		};
+
+		i2c2_pins: pinmux_i2c2_pins {
+			pinctrl-single,pins = <
+				0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
+				0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
+			>;
+		};
+
+		spi0_pins: pinmux_spi0_pins {
+			pinctrl-single,pins = <
+				0x150 (PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
+				0x154 (PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
+				0x158 (PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
+				0x15c (PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
+			>;
+		};
+
+		spi1_pins: pinmux_spi1_pins {
+			pinctrl-single,pins = <
+				0x190 (PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
+				0x194 (PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
+				0x198 (PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
+				0x19c (PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
+			>;
+		};
+
+		mmc1_pins: pinmux_mmc1_pins {
+			pinctrl-single,pins = <
+				0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			>;
+		};
+
+		qspi1_default: qspi1_default {
+			pinctrl-single,pins = <
+				0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
+				0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
+				0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
+				0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
+				0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
+				0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
+			>;
+		};
+
+		pixcir_ts_pins: pixcir_ts_pins {
+			pinctrl-single,pins = <
+				0x44 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
+			>;
+		};
+
+		hdq_pins: pinmux_hdq_pins {
+			pinctrl-single,pins = <
+				0x234 (PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
+			>;
+		};
+
+		dss_pins: dss_pins {
+			pinctrl-single,pins = <
+				0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+				0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+				0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+				0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+				0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+				0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+				0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+				0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			>;
+		};
+
+		lcd_pins: lcd_pins {
+			pinctrl-single,pins = <
+				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
+				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
+			>;
+		};
 	};
 
 	matrix_keypad: matrix_keypad@0 {
@@ -113,12 +277,22 @@
 				0x0203006c	/* DOWN */
 				0x03030069>;	/* LEFT */
 		};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
 };
 
 &mmc1 {
 	status = "okay";
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 };
 
 &mac {
@@ -157,7 +331,9 @@
 	};
 
 	pixcir_ts@5c {
-		compatible = "pixcir,pixcir_ts";
+		compatible = "pixcir,pixcir_tangoc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pixcir_ts_pins>;
 		reg = <0x5c>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <17 0>;
@@ -165,10 +341,16 @@
 		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 
 		x-size = <1024>;
-		y-size = <768>;
+		y-size = <600>;
 	};
 };
 
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
 &gpio0 {
 	status = "okay";
 };
@@ -184,3 +366,201 @@
 &gpio3 {
 	status = "okay";
 };
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;  /* cs-on-ns */
+		gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
+		gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
+		gpmc,we-on-ns = <0>;   /* cs-on-ns */
+		gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
+		gpmc,oe-on-ns = <3>;  /* cs-on-ns + tRR + 2 */
+		gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
+		gpmc,access-ns = <30>; /* tCEA + 4*/
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x00040000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00040000 0x00040000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x000C0000 0x00040000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x00180000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x00280000 0x00040000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x002C0000 0x00040000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00300000 0x00700000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x1f600000>;
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi1_default>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "mx66l51235l";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first 512KiB
+		 * for a valid file to boot(XIP).
+		 */
+		partition@0 {
+			label = "QSPI.U_BOOT";
+			reg = <0x00000000 0x000080000>;
+		};
+		partition@1 {
+			label = "QSPI.U_BOOT.backup";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@2 {
+			label = "QSPI.U-BOOT-SPL_OS";
+			reg = <0x00100000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.U_BOOT_ENV";
+			reg = <0x00110000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.U-BOOT-ENV.backup";
+			reg = <0x00120000 0x00010000>;
+		};
+		partition@5 {
+			label = "QSPI.KERNEL";
+			reg = <0x00130000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.FILESYSTEM";
+			reg = <0x00930000 0x36D0000>;
+		};
+	};
+};
+
+&hdq {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdq_pins>;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index 142009cc9332..c7dc9dab93a4 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -11,6 +11,22 @@
 	sys_clkin_ck: sys_clkin_ck {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0040>;
+	};
+
+	crystal_freq_sel_ck: crystal_freq_sel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0040>;
+	};
+
+	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
 		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
 		ti,bit-shift = <22>;
 		reg = <0x0040>;
@@ -87,6 +103,54 @@
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
+
+	ehrpwm0_tbclk: ehrpwm0_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm3_tbclk: ehrpwm3_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm4_tbclk: ehrpwm4_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm5_tbclk: ehrpwm5_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0664>;
+	};
 };
 &prcm_clocks {
 	clk_32768_ck: clk_32768_ck {
@@ -229,6 +293,7 @@
 		reg = <0x2e30>;
 		ti,index-starts-at-one;
 		ti,invert-autoidle-bit;
+		ti,set-rate-parent;
 	};
 
 	dpll_per_ck: dpll_per_ck {
@@ -511,6 +576,7 @@
 		compatible = "ti,mux-clock";
 		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
 		reg = <0x4244>;
+		ti,set-rate-parent;
 	};
 
 	dpll_extdev_ck: dpll_extdev_ck {
@@ -609,10 +675,13 @@
 
 	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
 		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
+		compatible = "ti,fixed-factor-clock";
 		clocks = <&dpll_per_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e14>;
+		ti,invert-autoidle-bit;
 	};
 
 	dll_aging_clk_div: dll_aging_clk_div {
@@ -653,4 +722,36 @@
 		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4260>;
 	};
+
+	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usbphy_32khz_clkmux>;
+		ti,bit-shift = <8>;
+		reg = <0x2a40>;
+	};
+
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usbphy_32khz_clkmux>;
+		ti,bit-shift = <8>;
+		reg = <0x2a48>;
+	};
+
+	usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x8a60>;
+	};
+
+	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x8a68>;
+	};
 };
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 08a56bcfc724..416f4e5a69c1 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -35,7 +35,6 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <200000000>;
 				status = "okay";
 			};
 			sata@a0000 {
@@ -64,6 +63,23 @@
 				phy-mode = "rgmii-id";
 			};
 
+			i2c@11000 {
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <100000>;
+				status = "okay";
+				audio_codec: audio-codec@4a {
+					compatible = "cirrus,cs42l51";
+					reg = <0x4a>;
+				};
+			};
+
+			audio-controller@30000 {
+				pinctrl-0 = <&i2s_pins2>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
 			mvsdio@d4000 {
 				pinctrl-0 = <&sdio_pins1>;
 				pinctrl-names = "default";
@@ -80,6 +96,30 @@
 				broken-cd;
 			};
 
+			pinctrl {
+				/*
+				 * These pins might be muxed as I2S by
+				 * the bootloader, but it conflicts
+				 * with the real I2S pins that are
+				 * muxed using i2s_pins. We must mux
+				 * those pins to a function other than
+				 * I2S.
+				 */
+				pinctrl-0 = <&hog_pins1 &hog_pins2>;
+				pinctrl-names = "default";
+
+				hog_pins1: hog-pins1 {
+					marvell,pins = "mpp6",  "mpp8", "mpp10",
+						       "mpp12", "mpp13";
+					marvell,function = "gpio";
+				};
+
+				hog_pins2: hog-pins2 {
+					marvell,pins = "mpp5", "mpp7", "mpp9";
+					marvell,function = "gpo";
+				};
+			};
+
 			usb@50000 {
 				status = "okay";
 			};
@@ -112,10 +152,26 @@
 				/* Port 0, Lane 0 */
 				status = "okay";
 			};
+
 			pcie@2,0 {
 				/* Port 1, Lane 0 */
 				status = "okay";
 			};
 		};
 	};
+
+	sound {
+	      compatible = "marvell,a370db-audio";
+	      marvell,audio-controller = <&audio_controller>;
+	      marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
+	      status = "okay";
+	};
+
+	spdif_out: spdif-out {
+	      compatible = "linux,spdif-dit";
+	};
+
+	spdif_in: spdif-in {
+	      compatible = "linux,spdif-dir";
+	};
 };
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 944e8785b308..097df7d8f0f6 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -9,6 +9,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
 / {
@@ -46,7 +47,6 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <200000000>;
 				status = "okay";
 			};
 			timer@20300 {
@@ -73,19 +73,19 @@
 
 				green_pwr_led {
 					label = "mirabox:green:pwr";
-					gpios = <&gpio1 31 1>;
+					gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
 					default-state = "keep";
 				};
 
 				blue_stat_led {
 					label = "mirabox:blue:stat";
-					gpios = <&gpio2 0 1>;
+					gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 					default-state = "off";
 				};
 
 				green_stat_led {
 					label = "mirabox:green:stat";
-					gpios = <&gpio2 1 1>;
+					gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 					default-state = "off";
 				};
 			};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 651aeb5ef439..d6d572e5af32 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -50,7 +50,6 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <200000000>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 4e27587667bf..c5fe8b5dcdc7 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -50,7 +50,6 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <200000000>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index abbb807459d2..4169f4096ea3 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -12,6 +12,8 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
 / {
@@ -49,7 +51,6 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <200000000>;
 				status = "okay";
 			};
 			sata@a0000 {
@@ -100,8 +101,8 @@
 				#size-cells = <0>;
 				button@1 {
 					label = "Software Button";
-					linux,code = <116>;
-					gpios = <&gpio0 6 1>;
+					linux,code = <KEY_POWER>;
+					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 74b5964430ac..23227e0027ec 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -44,8 +44,8 @@
 		#size-cells = <1>;
 		controller = <&mbusc>;
 		interrupt-parent = <&mpic>;
-		pcie-mem-aperture = <0xe0000000 0x8000000>;
-		pcie-io-aperture  = <0xe8000000 0x100000>;
+		pcie-mem-aperture = <0xf8000000 0x7e00000>;
+		pcie-io-aperture  = <0xffe00000 0x100000>;
 
 		devbus-bootcs {
 			compatible = "marvell,mvebu-devbus";
@@ -157,6 +157,7 @@
 				reg-shift = <2>;
 				interrupts = <41>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 			serial@12100 {
@@ -165,6 +166,7 @@
 				reg-shift = <2>;
 				interrupts = <42>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 
@@ -199,6 +201,15 @@
 				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
 			};
 
+			watchdog@20300 {
+				reg = <0x20300 0x34>, <0x20704 0x4>;
+			};
+
+			pmsu@22000 {
+				compatible = "marvell,armada-370-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
 			usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x500>;
@@ -226,6 +237,7 @@
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
 				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
 			};
 
 			eth1: ethernet@74000 {
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 0d8530c98cf5..21b588b6f6bd 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -132,6 +132,25 @@
 							"mpp51", "mpp52", "mpp53";
 					marvell,function = "sd0";
 				};
+
+				i2c0_pins: i2c0-pins {
+					marvell,pins = "mpp2", "mpp3";
+					marvell,function = "i2c0";
+				};
+
+				i2s_pins1: i2s-pins1 {
+					marvell,pins = "mpp5", "mpp6", "mpp7",
+						       "mpp8", "mpp9", "mpp10",
+						       "mpp12", "mpp13";
+					marvell,function = "audio";
+				};
+
+				i2s_pins2: i2s-pins2 {
+					marvell,pins = "mpp49", "mpp47", "mpp50",
+						       "mpp59", "mpp57", "mpp61",
+						       "mpp62", "mpp60", "mpp58";
+					marvell,function = "audio";
+				};
 			};
 
 			gpio0: gpio@18100 {
@@ -196,6 +215,25 @@
 				clocks = <&coreclk 2>;
 			};
 
+			watchdog@20300 {
+				compatible = "marvell,armada-370-wdt";
+				clocks = <&coreclk 2>;
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x8>;
+			};
+
+			audio_controller: audio-controller@30000 {
+				compatible = "marvell,armada370-audio";
+				reg = <0x30000 0x4000>;
+				interrupts = <93>;
+				clocks = <&gateclk 0>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
 			usb@50000 {
 				clocks = <&coreclk 0>;
 			};
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
new file mode 100644
index 000000000000..772fec2d26ce
--- /dev/null
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -0,0 +1,142 @@
+/*
+ * Device Tree file for Marvell Armada 375 evaluation board
+ * (DB-88F6720)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-375.dtsi"
+
+/ {
+	model = "Marvell Armada 375 Development Board";
+	compatible = "marvell,a375-db", "marvell,armada375";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				pinctrl-0 = <&spi0_pins>;
+				pinctrl-names = "default";
+				/*
+				 * SPI conflicts with NAND, so we disable it
+				 * here, and select NAND as the enabled device
+				 * by default.
+				 */
+				status = "disabled";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			pinctrl {
+				sdio_st_pins: sdio-st-pins {
+					marvell,pins = "mpp44", "mpp45";
+					marvell,function = "gpio";
+				};
+			};
+
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+
+			nand: nand@d0000 {
+				pinctrl-0 = <&nand_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition@800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition@1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
+
+			usb@54000 {
+				status = "okay";
+			};
+
+			usb3@58000 {
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+				wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
new file mode 100644
index 000000000000..fb92551a1e71
--- /dev/null
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -0,0 +1,519 @@
+/*
+ * Device Tree Include file for Marvell Armada 375 family SoC
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 375 family SoC";
+	compatible = "marvell,armada375";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-375-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl {
+				compatible = "marvell,mv88f6720-pinctrl";
+				reg = <0x18000 0x24>;
+
+				i2c0_pins: i2c0-pins {
+					marvell,pins = "mpp14",  "mpp15";
+					marvell,function = "i2c0";
+				};
+
+				i2c1_pins: i2c1-pins {
+					marvell,pins = "mpp61",  "mpp62";
+					marvell,function = "i2c1";
+				};
+
+				nand_pins: nand-pins {
+					marvell,pins = "mpp0", "mpp1", "mpp2",
+						"mpp3", "mpp4", "mpp5",
+						"mpp6", "mpp7", "mpp8",
+						"mpp9", "mpp10", "mpp11",
+						"mpp12", "mpp13";
+					marvell,function = "nand";
+				};
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp24",  "mpp25", "mpp26",
+						     "mpp27", "mpp28", "mpp29";
+					marvell,function = "sd";
+				};
+
+				spi0_pins: spi0-pins {
+					marvell,pins = "mpp0",  "mpp1", "mpp4",
+						     "mpp5", "mpp8", "mpp9";
+					marvell,function = "spi0";
+				};
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-375-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-375-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			mpic: interrupt-controller@20000 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 0>;
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,armada-375-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
+				clocks = <&coreclk 0>;
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-375-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				status = "disabled";
+			};
+
+			usb@54000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x54000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			usb3@58000 {
+				compatible = "marvell,armada-375-xhci";
+				reg = <0x58000 0x20000>,<0x5b880 0x80>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 16>;
+				status = "disabled";
+			};
+
+			xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60A00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 23>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			sata@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x5000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 14>, <&gateclk 20>;
+				clock-names = "0", "1";
+				status = "disabled";
+			};
+
+			nand@d0000 {
+				compatible = "marvell,armada370-nand";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 17>;
+				bus-width = <4>;
+				cap-sdio-irq;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				status = "disabled";
+			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada375-thermal";
+				reg = <0xe8078 0x4>, <0xe807c 0x8>;
+				status = "okay";
+			};
+
+			coreclk: mvebu-sar@e8204 {
+				compatible = "marvell,armada-375-core-clock";
+				reg = <0xe8204 0x04>;
+				#clock-cells = <1>;
+			};
+
+			coredivclk: corediv-clock@e8250 {
+				compatible = "marvell,armada-375-corediv-clock";
+				reg = <0xe8250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
new file mode 100644
index 000000000000..e69bc6759c39
--- /dev/null
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -0,0 +1,119 @@
+/*
+ * Device Tree Include file for Marvell Armada 380 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 380 family SoC";
+	compatible = "marvell,armada380", "marvell,armada38x";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl {
+				compatible = "marvell,mv88f6810-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
+
+			/* x1 port */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
new file mode 100644
index 000000000000..ff9637dd8d0f
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-db.dts
@@ -0,0 +1,149 @@
+/*
+ * Device Tree file for Marvell Armada 385 evaluation board
+ * (DB-88F6820)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Development Board";
+	compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada38x";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "w25q32";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "ok";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sata@e0000 {
+				status = "okay";
+			};
+
+			flash@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition@800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition@1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
+
+			sdhci@d8000 {
+				clock-frequency = <200000000>;
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts
new file mode 100644
index 000000000000..40893255a3f0
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-rd.dts
@@ -0,0 +1,97 @@
+/*
+ * Device Tree file for Marvell Armada 385 Reference Design board
+ * (RD-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Reference Design";
+	compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada38x";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "st,m25p128";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
new file mode 100644
index 000000000000..f011009bf4cf
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -0,0 +1,151 @@
+/*
+ * Device Tree Include file for Marvell Armada 385 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 385 family SoC";
+	compatible = "marvell,armada385", "marvell,armada38x";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl {
+				compatible = "marvell,mv88f6820-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
+
+			/*
+			 * This port can be either x4 or x1. When
+			 * configured in x4 by the bootloader, then
+			 * pcie@4,0 is not available.
+			 */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			/*
+			 * x1 port only available when pcie@1,0 is
+			 * configured as a x1 port
+			 */
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
new file mode 100644
index 000000000000..3de364e81b52
--- /dev/null
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -0,0 +1,461 @@
+/*
+ * Device Tree Include file for Marvell Armada 38x family of SoCs.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 38x family SoC";
+	compatible = "marvell,armada38x";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		eth0 = &eth0;
+		eth1 = &eth1;
+		eth2 = &eth2;
+	};
+
+	soc {
+		compatible = "marvell,armada380-mbus", "marvell,armada370-mbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
+		};
+
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl {
+				compatible = "marvell,mv88f6820-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <28>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-380-system-controller",
+					     "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-380-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18600 {
+				compatible = "marvell,armada-380-core-clock";
+				reg = <0x18600 0x04>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			mpic: interrupt-controller@20000 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-380-timer",
+					     "marvell,armada-xp-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,armada-380-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-380-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			pmsu@22000 {
+				compatible = "marvell,armada-380-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			eth1: ethernet@30000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x30000 0x4000>;
+				interrupts-extended = <&mpic 10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+			};
+
+			eth2: ethernet@34000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x34000 0x4000>;
+				interrupts-extended = <&mpic 12>;
+				clocks = <&gateclk 2>;
+				status = "disabled";
+			};
+
+			usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x58000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				status = "disabled";
+			};
+
+			xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			eth0: ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x70000 0x4000>;
+				interrupts-extended = <&mpic 8>;
+				clocks = <&gateclk 4>;
+				status = "disabled";
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
+			};
+
+			sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+			coredivclk: clock@e4250 {
+				compatible = "marvell,armada-380-corediv-clock";
+				reg = <0xe4250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada380-thermal";
+				reg = <0xe4078 0x4>, <0xe4074 0x4>;
+				status = "okay";
+			};
+
+			flash@d0000 {
+				compatible = "marvell,armada370-nand";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			sdhci@d8000 {
+				compatible = "marvell,armada-380-sdhci";
+				reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+				interrupts = <0 25 0x4>;
+				clocks = <&gateclk 17>;
+				mrvl,clk-delay-cycles = <0x1F>;
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			usb3@f8000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+		};
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index c5fe57269f5a..a55a97a70505 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -16,6 +16,8 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include "armada-xp-mv78230.dtsi"
 
 / {
@@ -93,12 +95,10 @@
 			};
 
 			serial@12000 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 
 			serial@12100 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 
@@ -157,8 +157,8 @@
 
 		button@1 {
 			label = "Factory Reset Button";
-			linux,code = <141>; /* KEY_SETUP */
-			gpios = <&gpio1 1 1>;
+			linux,code = <KEY_SETUP>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index bcf6d79a57ec..42ddb2864365 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -2,7 +2,7 @@
  * Device Tree file for Marvell Armada XP evaluation board
  * (DB-78460-BP)
  *
- * Copyright (C) 2012 Marvell
+ * Copyright (C) 2012-2014 Marvell
  *
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
@@ -11,6 +11,15 @@
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
+  *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
  */
 
 /dts-v1/;
@@ -30,7 +39,7 @@
 	};
 
 	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
 
@@ -40,7 +49,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;
@@ -97,19 +106,15 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12100 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12200 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12300 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 274e2ad5f51c..0478c55ca656 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -2,7 +2,7 @@
  * Device Tree file for Marvell Armada XP development board
  * (DB-MV784MP-GP)
  *
- * Copyright (C) 2013 Marvell
+ * Copyright (C) 2013-2014 Marvell
  *
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
@@ -11,6 +11,15 @@
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
  */
 
 /dts-v1/;
@@ -30,16 +39,17 @@
                  * 8 GB of plug-in RAM modules by default.The amount
                  * of memory available can be changed by the
                  * bootloader according the size of the module
-                 * actually plugged. Only 7GB are usable because
-                 * addresses from 0xC0000000 to 0xffffffff are used by
-                 * the internal registers of the SoC.
+                 * actually plugged. However, memory between
+                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
+                 * the address range used for I/O (internal registers,
+                 * MBus windows).
 		 */
-		reg = <0x00000000 0x00000000 0x00000000 0xC0000000>,
+		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
 		      <0x00000001 0x00000000 0x00000001 0x00000000>;
 	};
 
 	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
 
@@ -49,7 +59,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;
@@ -94,19 +104,15 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12100 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12200 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12300 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 
@@ -136,22 +142,22 @@
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 
 			/* Front-side USB slot */
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index e47c49ecd55c..25674fe81f70 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -23,7 +23,12 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
+		/*
+		 * This board has 4 GB of RAM, but the last 256 MB of
+		 * RAM are not usable due to the overlap with the MBus
+		 * Window address range
+		 */
+		reg = <0 0x00000000 0 0xf0000000>;
 	};
 
 	soc {
@@ -32,19 +37,15 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12100 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12200 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12300 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 98335fb34b7a..1257ff1ed278 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -27,6 +27,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
 
 		cpu@0 {
 			device_type = "cpu";
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 9480cf891f8c..3396b25b39e1 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -29,6 +29,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
 
 		cpu@0 {
 			device_type = "cpu";
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 31ba6d8fbadf..6da84bf40aaf 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -30,6 +30,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
 
 		cpu@0 {
 			device_type = "cpu";
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index ff049ee862eb..0cf999abc4ed 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -138,7 +138,6 @@
 			};
 
 			serial@12000 {
-				clocks = <&coreclk 0>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 99bcf76e6953..e5c6a0492ca0 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -11,6 +11,8 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include "armada-xp-mv78260.dtsi"
 
 / {
@@ -37,7 +39,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;
@@ -70,11 +72,9 @@
 
 		internal-regs {
 			serial@12000 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			serial@12100 {
-				clock-frequency = <250000000>;
 				status = "okay";
 			};
 			pinctrl {
@@ -90,19 +90,19 @@
 
 				red_led {
 					label = "red_led";
-					gpios = <&gpio1 17 1>;
+					gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 					default-state = "off";
 				};
 
 				yellow_led {
 					label = "yellow_led";
-					gpios = <&gpio1 19 1>;
+					gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 					default-state = "off";
 				};
 
 				green_led {
 					label = "green_led";
-					gpios = <&gpio1 21 1>;
+					gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 					default-state = "keep";
 				};
 			};
@@ -114,8 +114,8 @@
 
 				button@1 {
 					label = "Init Button";
-					linux,code = <116>;
-					gpios = <&gpio1 28 0>;
+					linux,code = <KEY_POWER>;
+					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index b8b84a22f0f3..5902e8359c91 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -58,6 +58,7 @@
 				reg-shift = <2>;
 				interrupts = <43>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 			serial@12300 {
@@ -66,6 +67,7 @@
 				reg-shift = <2>;
 				interrupts = <44>;
 				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 
@@ -111,9 +113,15 @@
 				clock-names = "nbclk", "fixed";
 			};
 
-			armada-370-xp-pmsu@22000 {
-				compatible = "marvell,armada-370-xp-pmsu";
-				reg = <0x22100 0x400>, <0x20800 0x20>;
+			watchdog@20300 {
+				compatible = "marvell,armada-xp-wdt";
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x20>;
 			};
 
 			eth2: ethernet@30000 {
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index cce45f5177f9..55ab6180e350 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -129,7 +129,6 @@
 			adc0: adc@f804c000 {
 				status = "okay";
 				atmel,adc-channels-used = <0xf>;
-				atmel,adc-num-channels = <4>;
 			};
 
 			dbgu: serial@fffff200 {
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
index 2093c4d7cd6a..df4b78695695 100644
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ b/arch/arm/boot/dts/at91-cosino.dtsi
@@ -64,7 +64,6 @@
 			};
 
 			adc0: adc@f804c000 {
-				atmel,adc-clock-rate = <1000000>;
 				atmel,adc-ts-wires = <4>;
 				atmel,adc-ts-pressure-threshold = <10000>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts
index f9415dd11f17..27ebb0f722fd 100644
--- a/arch/arm/boot/dts/at91-cosino_mega2560.dts
+++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts
@@ -27,17 +27,11 @@
 			};
 
 			adc0: adc@f804c000 {
-				atmel,adc-clock-rate = <1000000>;
 				atmel,adc-ts-wires = <4>;
 				atmel,adc-ts-pressure-threshold = <10000>;
 				status = "okay";
 			};
 
-
-			tsadcc: tsadcc@f804c000 {
-				status = "okay";
-			};
-
 			rtc@fffffeb0 {
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index ce1375595e5f..5b8e40400bec 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -21,6 +21,14 @@
 		reg = <0x20000000 0x10000000>;
 	};
 
+	slow_xtal {
+		clock-frequency = <32768>;
+	};
+
+	main_xtal {
+		clock-frequency = <12000000>;
+	};
+
 	ahb {
 		apb {
 			mmc0: mmc@f0000000 {
@@ -34,7 +42,7 @@
 			};
 
 			spi0: spi@f0004000 {
-				cs-gpios = <&pioD 13 0>;
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
 
@@ -43,11 +51,54 @@
 			};
 
 			i2c0: i2c@f0014000 {
+				pinctrl-0 = <&pinctrl_i2c0_pu>;
 				status = "okay";
 			};
 
 			i2c1: i2c@f0018000 {
 				status = "okay";
+
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "okay";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <1200000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG1 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+
+						vddana_reg: LDO_REG2 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+					};
+				};
 			};
 
 			macb0: ethernet@f0028000 {
@@ -55,6 +106,12 @@
 				status = "okay";
 			};
 
+			pwm0: pwm@f002c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
+				status = "okay";
+			};
+
 			usart0: serial@f001c000 {
 				status = "okay";
 			};
@@ -79,7 +136,7 @@
 			};
 
 			spi1: spi@f8008000 {
-				cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
+				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
 
@@ -102,6 +159,7 @@
 
 			i2c2: i2c@f801c000 {
 				dmas = <0>, <0>;	/* Do not use DMA for i2c2 */
+				pinctrl-0 = <&pinctrl_i2c2_pu>;
 				status = "okay";
 			};
 
@@ -116,6 +174,18 @@
 
 			pinctrl@fffff200 {
 				board {
+					pinctrl_i2c0_pu: i2c0_pu {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_i2c2_pu: i2c2_pu {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
 					pinctrl_mmc0_cd: mmc0_cd {
 						atmel,pins =
 							<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 997901f7ed73..c0e0eae16a27 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -608,39 +608,40 @@
 			};
 
 			adc0: adc@fffe0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffe0000 0x100>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
 				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xf>;
 				atmel,adc-vref = <3300>;
-				atmel,adc-num-channels = <4>;
 				atmel,adc-startup-time = <15>;
-				atmel,adc-channel-base = <0x30>;
-				atmel,adc-drdy-mask = <0x10000>;
-				atmel,adc-status-register = <0x1c>;
-				atmel,adc-trigger-register = <0x04>;
 				atmel,adc-res = <8 10>;
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
 				trigger@0 {
+					reg = <0>;
 					trigger-name = "timer-counter-0";
 					trigger-value = <0x1>;
 				};
 				trigger@1 {
+					reg = <1>;
 					trigger-name = "timer-counter-1";
 					trigger-value = <0x3>;
 				};
 
 				trigger@2 {
+					reg = <2>;
 					trigger-name = "timer-counter-2";
 					trigger-value = <0x5>;
 				};
 
 				trigger@3 {
+					reg = <3>;
 					trigger-name = "external";
-					trigger-value = <0x13>;
+					trigger-value = <0xd>;
 					trigger-external;
 				};
 			};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
new file mode 100644
index 000000000000..b309c1c6e848
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -0,0 +1,858 @@
+/*
+ * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	model = "Atmel AT91SAM9261 family SoC";
+	compatible = "atmel,at91sam9261";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		ssc2 = &ssc2;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	main_xtal: main_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	slow_xtal: slow_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&ohci_clk>, <&hclk0>, <&uhpck>;
+			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		fb0: fb@0x00600000 {
+			compatible = "atmel,at91sam9261-lcdc";
+			reg = <0x00600000 0x1000>;
+			interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&lcd_clk>, <&hclk1>;
+			clock-names = "lcdc_clk", "hclk";
+			status = "disabled";
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000>;
+			atmel,nand-addr-offset = <22>;
+			atmel,nand-cmd-offset = <21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+
+			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>,
+				<&pioC 14 GPIO_ACTIVE_HIGH>,
+				<0>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91rm9200-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&usb>, <&udc_clk>, <&udpck>;
+				clock-names = "usb_clk", "udc_clk", "udpck";
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9261-i2c";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c_twi>;
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000{
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&ssc1_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc2: ssc@fffc4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+				clocks = <&ssc2_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffc8000 0x200>;
+				cs-gpios = <0>, <0>, <0>, <0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ramc: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9260-bus-matrix";
+				reg = <0xffffee00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+
+				atmel,mux-mask =
+				      /*    A         B     */
+				      <0xffffffff 0xfffffff7>,  /* pioA */
+				      <0xffffffff 0xfffffff4>,  /* pioB */
+				      <0xffffffff 0xffffff07>;  /* pioC */
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+					};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc2 {
+					pinctrl_ssc2_tx: ssc2_tx-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc2_rx: ssc2_rx-0 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c_bitbang: i2c-0-bitbang {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_i2c_twi: i2c-0-twi {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioA_clk>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioB_clk>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioC_clk>;
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "fixed-clock";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9260-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91rm9200-clk-main";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <1000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
+								<190000000 240000000 2 1>;
+				};
+
+				pllb: pllbck {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+					clocks = <&main>;
+					reg = <1>;
+					atmel,clk-input-range = <1000000 5000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91rm9200-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+					atmel,clk-output-range = <0 94000000>;
+					atmel,clk-divisors = <1 2 4 0>;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91rm9200-clk-usb";
+					#clock-cells = <0>;
+					atmel,clk-divisors = <1 2 4 0>;
+					clocks = <&pllb>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91rm9200-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+
+					prog2: prog2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						interrupts = <AT91_PMC_PCKRDY(2)>;
+					};
+
+					prog3: prog3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						interrupts = <AT91_PMC_PCKRDY(3)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					uhpck: uhpck {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck2 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+
+					pck3: pck3 {
+						#clock-cells = <0>;
+						reg = <11>;
+						clocks = <&prog3>;
+					};
+
+					hclk0: hclk0 {
+						#clock-cells = <0>;
+						reg = <16>;
+						clocks = <&mck>;
+					};
+
+					hclk1: hclk1 {
+						#clock-cells = <0>;
+						reg = <17>;
+						clocks = <&mck>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91rm9200-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					pioA_clk: pioA_clk {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioB_clk: pioB_clk {
+						#clock-cells = <0>;
+						reg = <3>;
+					};
+
+					pioC_clk: pioC_clk {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					usart0_clk: usart0_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart1_clk: usart1_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart2_clk: usart2_clk {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					mci0_clk: mci0_clk {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					udc_clk: udc_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					twi0_clk: twi0_clk {
+						reg = <11>;
+						#clock-cells = <0>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi1_clk: spi1_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					ssc1_clk: ssc1_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					ssc2_clk: ssc2_clk {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tc0_clk: tc0_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					tc1_clk: tc1_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					tc2_clk: tc2_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					ohci_clk: ohci_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					lcd_clk: lcd_clk {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+				};
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_bitbang>;
+		gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
new file mode 100644
index 000000000000..c6683ea8b743
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -0,0 +1,215 @@
+/*
+ * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+/dts-v1/;
+#include "at91sam9261.dtsi"
+
+/ {
+	model = "Atmel at91sam9261ek";
+	compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	main_xtal {
+		clock-frequency = <18432000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		usb0: ohci@00500000 {
+			status = "okay";
+		};
+
+		fb0: fb@0x00600000 {
+			display = <&display0>;
+			atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "BRG";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		apb {
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
+				status = "okay";
+
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					reg = <0>;
+					spi-max-frequency = <15000000>;
+				};
+
+				tsc2046@0 {
+					reg = <2>;
+					compatible = "ti,ads7843";
+					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
+					spi-max-frequency = <3000000>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+					ti,x-min = /bits/ 16 <150>;
+					ti,x-max = /bits/ 16 <3830>;
+					ti,y-min = /bits/ 16 <190>;
+					ti,y-max = /bits/ 16 <3830>;
+					ti,vref-delay-usecs = /bits/ 16 <450>;
+					ti,x-plate-ohms = /bits/ 16 <450>;
+					ti,y-plate-ohms = /bits/ 16 <250>;
+					ti,pressure-max = /bits/ 16 <15000>;
+					ti,debounce-rep = /bits/ 16 <0>;
+					ti,debounce-tol = /bits/ 16 <65535>;
+					ti,debounce-max = /bits/ 16 <1>;
+
+					linux,wakeup;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds8 {
+			label = "ds8";
+			gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		ds7 {
+			label = "ds7";
+			gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button_0 {
+			label = "button_0";
+			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+			gpio-key,wakeup;
+		};
+
+		button_1 {
+			label = "button_1";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			linux,code = <257>;
+			gpio-key,wakeup;
+		};
+
+		button_2 {
+			label = "button_2";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			linux,code = <258>;
+			gpio-key,wakeup;
+		};
+
+		button_3 {
+			label = "button_3";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			linux,code = <259>;
+			gpio-key,wakeup;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index cbcc058b26b4..ace6bf197b70 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -136,6 +136,36 @@
 				      >;
 
 				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
@@ -632,40 +662,40 @@
 			};
 
 			adc0: adc@fffb0000 {
-				compatible = "atmel,at91sam9260-adc";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9g45-adc";
 				reg = <0xfffb0000 0x100>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xff>;
 				atmel,adc-vref = <3300>;
-				atmel,adc-num-channels = <8>;
 				atmel,adc-startup-time = <40>;
-				atmel,adc-channel-base = <0x30>;
-				atmel,adc-drdy-mask = <0x10000>;
-				atmel,adc-status-register = <0x1c>;
-				atmel,adc-trigger-register = <0x08>;
 				atmel,adc-res = <8 10>;
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
 				trigger@0 {
+					reg = <0>;
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
 				trigger@1 {
+					reg = <1>;
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
 
 				trigger@2 {
+					reg = <2>;
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
 
 				trigger@3 {
+					reg = <3>;
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -817,6 +847,7 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioC 8 GPIO_ACTIVE_HIGH
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 7ff665a8c708..9f5b0a674995 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91sam9g45.dtsi"
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Atmel AT91SAM9M10G45-EK";
@@ -130,6 +131,21 @@
 				status = "okay";
 			};
 
+			adc0: adc@fffb0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
 			pwm0: pwm@fffb8000 {
 				status = "okay";
 
@@ -216,14 +232,14 @@
 
 		d6 {
 			label = "d6";
-			pwms = <&pwm0 3 5000 0>;
+			pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		d7 {
 			label = "d7";
-			pwms = <&pwm0 1 5000 0>;
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 			linux,default-trigger = "mmc0";
 		};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 394e6ce2afb7..d1b82e6635d5 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	model = "Atmel AT91SAM9N12 SoC";
@@ -49,6 +50,18 @@
 		reg = <0x20000000 0x10000000>;
 	};
 
+	slow_xtal: slow_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	main_xtal: main_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -75,8 +88,280 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
-				reg = <0xfffffc00 0x100>;
+				compatible = "atmel,at91sam9n12-pmc";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <50000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc>, <&main_osc>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <2000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
+								      <695000000 750000000 1 0>,
+								      <645000000 700000000 2 0>,
+								      <595000000 650000000 3 0>,
+								      <545000000 600000000 0 1>,
+								      <495000000 555000000 1 1>,
+								      <445000000 500000000 1 2>,
+								      <400000000 450000000 1 3>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				pllb: pllbck {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+					clocks = <&main>;
+					reg = <1>;
+					atmel,clk-input-range = <2000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <3>;
+					atmel,pll-clk-output-ranges = <30000000 100000000 0>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>;
+					atmel,clk-output-range = <0 133333333>;
+					atmel,clk-divisors = <1 2 4 3>;
+					atmel,master-clk-have-div3-pres;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9n12-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&pllb>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					lcdck: lcdck {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+
+					uhpck: uhpck {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					pioAB_clk: pioAB_clk {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioCD_clk: pioCD_clk {
+						#clock-cells = <0>;
+						reg = <3>;
+					};
+
+					fuse_clk: fuse_clk {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					usart0_clk: usart0_clk {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart1_clk: usart1_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart2_clk: usart2_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart3_clk: usart3_clk {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					twi0_clk: twi0_clk {
+						reg = <9>;
+						#clock-cells = <0>;
+					};
+
+					twi1_clk: twi1_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					mci0_clk: mci0_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					spi1_clk: spi1_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					uart0_clk: uart0_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					uart1_clk: uart1_clk {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tcb_clk: tcb_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					pwm_clk: pwm_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					adc_clk: adc_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					dma0_clk: dma0_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					uhphs_clk: uhphs_clk {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					udphs_clk: udphs_clk {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+
+					lcdc_clk: lcdc_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+
+					sha_clk: sha_clk {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+
+					aes_clk: aes_clk {
+						#clock-cells = <0>;
+						reg = <29>;
+					};
+
+					trng_clk: trng_clk {
+						#clock-cells = <0>;
+						reg = <30>;
+					};
+				};
 			};
 
 			rstc@fffffe00 {
@@ -88,6 +373,7 @@
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
 			};
 
 			shdwc@fffffe10 {
@@ -95,12 +381,38 @@
 				reg = <0xfffffe10 0x10>;
 			};
 
+			sckc@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc>, <&slow_osc>;
+				};
+			};
+
 			mmc0: mmc@f0008000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -110,12 +422,16 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb_clk>;
+				clock-names = "t0_clk";
 			};
 
 			tcb1: timer@f800c000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf800c000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb_clk>;
+				clock-names = "t0_clk";
 			};
 
 			dma: dma-controller@ffffec00 {
@@ -123,6 +439,8 @@
 				reg = <0xffffec00 0x200>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
 			};
 
 			pinctrl@fffff400 {
@@ -392,6 +710,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioAB_clk>;
 				};
 
 				pioB: gpio@fffff600 {
@@ -402,6 +721,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioAB_clk>;
 				};
 
 				pioC: gpio@fffff800 {
@@ -412,6 +732,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioCD_clk>;
 				};
 
 				pioD: gpio@fffffa00 {
@@ -422,6 +743,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioCD_clk>;
 				};
 			};
 
@@ -431,6 +753,8 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -443,6 +767,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
 				status = "disabled";
 			};
 
@@ -452,6 +778,8 @@
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -461,6 +789,8 @@
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -470,6 +800,8 @@
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -479,6 +811,8 @@
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -493,6 +827,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&twi0_clk>;
 				status = "disabled";
 			};
 
@@ -507,6 +842,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&twi1_clk>;
 				status = "disabled";
 			};
 
@@ -521,6 +857,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
@@ -535,6 +873,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
@@ -554,6 +894,7 @@
 				reg = <0xf8034000 0x300>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
 				#pwm-cells = <3>;
+				clocks = <&pwm_clk>;
 				status = "disabled";
 			};
 		};
@@ -570,6 +911,7 @@
 			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioD 5 GPIO_ACTIVE_HIGH
@@ -583,6 +925,9 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x00100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+				 <&uhpck>;
+			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 924a6a6ffd0f..64bbe46e4f90 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -21,6 +21,14 @@
 		reg = <0x20000000 0x8000000>;
 	};
 
+	slow_xtal {
+		clock-frequency = <32768>;
+	};
+
+	main_xtal {
+		clock-frequency = <16000000>;
+	};
+
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
new file mode 100644
index 000000000000..1da183155eee
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -0,0 +1,1082 @@
+/*
+ * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
+ *
+ *  Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Atmel AT91SAM9RL family SoC";
+	compatible = "atmel,at91sam9rl", "atmel,at91sam9";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x04000000>;
+	};
+
+	slow_xtal: slow_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	main_xtal: main_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	clocks {
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fb0: fb@00500000 {
+			compatible = "atmel,at91sam9rl-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&lcd_clk>, <&lcd_clk>;
+			clock-names = "hclk", "lcdc_clk";
+			status = "disabled";
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000>,
+			      <0xffffe800 0x200>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>,
+				<&pioB 6 GPIO_ACTIVE_HIGH>,
+				<0>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk";
+			};
+
+			mmc0: mmc@fffa4000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa4000 0x600>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffa8000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffa8000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffbc000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffbc000 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffc0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@fffc8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffc8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pwm_clk>;
+				clock-names = "pwm_clk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffd0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9rl-adc";
+				reg = <0xfffd0000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&adc_clk>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0x3f>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-use-res = "highres";
+
+				trigger@0 {
+					reg = <0>;
+					trigger-name = "timer-counter-0";
+					trigger-value = <0x1>;
+				};
+				trigger@1 {
+					reg = <1>;
+					trigger-name = "timer-counter-1";
+					trigger-value = <0x3>;
+				};
+
+				trigger@2 {
+					reg = <2>;
+					trigger-name = "timer-counter-2";
+					trigger-value = <0x5>;
+				};
+
+				trigger@3 {
+					reg = <3>;
+					trigger-name = "external";
+					trigger-value = <0x13>;
+					trigger-external;
+				};
+			};
+
+			usb0: gadget@fffd4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9rl-udc";
+				reg = <0x00600000 0x100000>,
+				      <0xfffd4000 0x4000>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&udphs_clk>, <&utmi>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+
+				ep0 {
+					reg = <0>;
+					atmel,fifo-size = <64>;
+					atmel,nb-banks = <1>;
+				};
+
+				ep1 {
+					reg = <1>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep2 {
+					reg = <2>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep3 {
+					reg = <3>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep4 {
+					reg = <4>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep5 {
+					reg = <5>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep6 {
+					reg = <6>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask =
+					/*    A         B     */
+					<0xffffffff 0xe05c6738>,  /* pioA */
+					<0xffffffff 0x0000c780>,  /* pioB */
+					<0xffffffff 0xe3ffff0e>,  /* pioC */
+					<0x003fffff 0x0001ff3c>;  /* pioD */
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_ts: adc0_ts-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad0: adc0_ad0-0 {
+						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad1: adc0_ad1-0 {
+						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad2: adc0_ad2-0 {
+						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad3: adc0_ad3-0 {
+						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad4: adc0_ad4-0 {
+						atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad5: adc0_ad5-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_adtrg: adc0_adtrg-0 {
+						atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				i2c_gpio1 {
+					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand0_ale_cle: nand_ale_cle-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_nand0_oe_we: nand_oe_we-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_nand0_cs: nand_cs-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 {
+						atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioA_clk>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioB_clk>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioC_clk>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioD_clk>;
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9g45-pmc";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				main: mainck {
+					compatible = "atmel,at91rm9200-clk-main";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <1000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <3>;
+					atmel,pll-clk-output-ranges = <80000000 200000000 0>,
+								<190000000 240000000 2>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91rm9200-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plla>, <&utmi>;
+					atmel,clk-output-range = <0 94000000>;
+					atmel,clk-divisors = <1 2 4 0>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91rm9200-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+				};
+
+				periphck {
+					compatible = "atmel,at91rm9200-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					pioA_clk: pioA_clk {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioB_clk: pioB_clk {
+						#clock-cells = <0>;
+						reg = <3>;
+					};
+
+					pioC_clk: pioC_clk {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					pioD_clk: pioD_clk {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart0_clk: usart0_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart1_clk: usart1_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart2_clk: usart2_clk {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					usart3_clk: usart3_clk {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					mci0_clk: mci0_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					twi0_clk: twi0_clk {
+						#clock-cells = <0>;
+						reg = <11>;
+					};
+
+					twi1_clk: twi1_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					ssc1_clk: ssc1_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					tc0_clk: tc0_clk {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tc1_clk: tc1_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					tc2_clk: tc2_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					pwm_clk: pwm_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					adc_clk: adc_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					dma0_clk: dma0_clk {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					udphs_clk: udphs_clk {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					lcd_clk: lcd_clk {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+				};
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+
+			sckc@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					atmel,startup-time-usec = <1200000>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					atmel,startup-time-usec = <75>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+
+	i2c@1 {
+		compatible = "i2c-gpio";
+		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio1>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
new file mode 100644
index 000000000000..d4a010e40fe3
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -0,0 +1,248 @@
+/*
+ * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
+ *
+ *  Copyright (C) 2014  Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+#include "at91sam9rl.dtsi"
+
+/ {
+	model = "Atmel at91sam9rlek";
+	compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+
+	slow_xtal {
+		clock-frequency = <32768>;
+	};
+
+	main_xtal {
+		clock-frequency = <12000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		fb0: fb@00500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt = <1>;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		apb {
+			mmc0: mmc@fffa4000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 = <
+					&pinctrl_usart0
+					&pinctrl_usart0_rts
+					&pinctrl_usart0_cts>;
+				status = "okay";
+			};
+
+			adc0: adc@fffd0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_adtrg>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
+			usb0: gadget@fffd4000 {
+				atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffcc000 {
+				status = "okay";
+				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			pwm0: pwm@fffc8000 {
+				status = "okay";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm1_2>,
+					<&pinctrl_pwm0_pwm2_2>;
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				main: mainck {
+					clock-frequency = <12000000>;
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		ds1 {
+			label = "ds1";
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+
+		ds2 {
+			label = "ds2";
+			pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds3 {
+			label = "ds3";
+			gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			gpio-key,wakeup;
+		};
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+	};
+
+	i2c@1 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 174219de92fa..1a57298636a5 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	model = "Atmel AT91SAM9x5 family SoC";
@@ -51,6 +52,24 @@
 		reg = <0x20000000 0x10000000>;
 	};
 
+	slow_xtal: slow_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	main_xtal: main_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	adc_op_clk: adc_op_clk{
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <5000000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -77,8 +96,272 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
+				compatible = "atmel,at91sam9x5-pmc";
 				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <50000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc>, <&main_osc>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <2000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <745000000 800000000 0 0
+								       695000000 750000000 1 0
+								       645000000 700000000 2 0
+								       595000000 650000000 3 0
+								       545000000 600000000 0 1
+								       495000000 555000000 1 1
+								       445000000 500000000 1 2
+								       400000000 450000000 1 3>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <0 133333333>;
+					atmel,clk-divisors = <1 2 4 3>;
+					atmel,master-clk-have-div3-pres;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+				};
+
+				smd: smdclk {
+					compatible = "atmel,at91sam9x5-clk-smd";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					smdck: smdck {
+						#clock-cells = <0>;
+						reg = <4>;
+						clocks = <&smd>;
+					};
+
+					uhpck: uhpck {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					pioAB_clk: pioAB_clk {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioCD_clk: pioCD_clk {
+						#clock-cells = <0>;
+						reg = <3>;
+					};
+
+					smd_clk: smd_clk {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					usart0_clk: usart0_clk {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart1_clk: usart1_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart2_clk: usart2_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					twi0_clk: twi0_clk {
+						reg = <9>;
+						#clock-cells = <0>;
+					};
+
+					twi1_clk: twi1_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					twi2_clk: twi2_clk {
+						#clock-cells = <0>;
+						reg = <11>;
+					};
+
+					mci0_clk: mci0_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					spi1_clk: spi1_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					uart0_clk: uart0_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					uart1_clk: uart1_clk {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tcb0_clk: tcb0_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					pwm_clk: pwm_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					adc_clk: adc_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					dma0_clk: dma0_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					dma1_clk: dma1_clk {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					uhphs_clk: uhphs_clk {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					udphs_clk: udphs_clk {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+
+					mci1_clk: mci1_clk {
+						#clock-cells = <0>;
+						reg = <26>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+				};
 			};
 
 			rstc@fffffe00 {
@@ -95,18 +378,47 @@
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			sckc@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc>, <&slow_osc>;
+				};
 			};
 
 			tcb0: timer@f8008000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>;
+				clock-names = "t0_clk";
 			};
 
 			tcb1: timer@f800c000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf800c000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>;
+				clock-names = "t0_clk";
 			};
 
 			dma0: dma-controller@ffffec00 {
@@ -114,6 +426,8 @@
 				reg = <0xffffec00 0x200>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
 			};
 
 			dma1: dma-controller@ffffee00 {
@@ -121,6 +435,8 @@
 				reg = <0xffffee00 0x200>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
+				clocks = <&dma1_clk>;
+				clock-names = "dma_clk";
 			};
 
 			pinctrl@fffff400 {
@@ -453,6 +769,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioAB_clk>;
 				};
 
 				pioB: gpio@fffff600 {
@@ -464,6 +781,7 @@
 					#gpio-lines = <19>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioAB_clk>;
 				};
 
 				pioC: gpio@fffff800 {
@@ -474,6 +792,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioCD_clk>;
 				};
 
 				pioD: gpio@fffffa00 {
@@ -485,6 +804,7 @@
 					#gpio-lines = <22>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioCD_clk>;
 				};
 			};
 
@@ -497,6 +817,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
 				status = "disabled";
 			};
 
@@ -507,6 +829,8 @@
 				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				pinctrl-names = "default";
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -519,6 +843,8 @@
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				pinctrl-names = "default";
+				clocks = <&mci1_clk>;
+				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -530,6 +856,8 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -539,6 +867,8 @@
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -548,6 +878,8 @@
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -557,6 +889,8 @@
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -571,6 +905,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&twi0_clk>;
 				status = "disabled";
 			};
 
@@ -585,6 +920,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&twi1_clk>;
 				status = "disabled";
 			};
 
@@ -599,6 +935,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c2>;
+				clocks = <&twi2_clk>;
 				status = "disabled";
 			};
 
@@ -608,6 +945,8 @@
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -617,45 +956,51 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
 			adc0: adc@f804c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xf804c000 0x100>;
 				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				atmel,adc-use-external;
+				clocks = <&adc_clk>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xffff>;
 				atmel,adc-vref = <3300>;
-				atmel,adc-num-channels = <12>;
 				atmel,adc-startup-time = <40>;
-				atmel,adc-channel-base = <0x50>;
-				atmel,adc-drdy-mask = <0x1000000>;
-				atmel,adc-status-register = <0x30>;
-				atmel,adc-trigger-register = <0xc0>;
 				atmel,adc-res = <8 10>;
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
 				trigger@0 {
+					reg = <0>;
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
 
 				trigger@1 {
+					reg = <1>;
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
 
 				trigger@2 {
+					reg = <2>;
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
 
 				trigger@3 {
+					reg = <3>;
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -672,6 +1017,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
@@ -686,6 +1033,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
@@ -790,6 +1139,7 @@
 			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioD 5 GPIO_ACTIVE_HIGH
@@ -803,6 +1153,9 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+				 <&uhpck>;
+			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 
@@ -810,6 +1163,8 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi
new file mode 100644
index 000000000000..f44ab7702a12
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi
@@ -0,0 +1,31 @@
+/*
+ * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					can0_clk: can0_clk {
+						#clock-cells = <0>;
+						reg = <29>;
+					};
+
+                                        can1_clk: can1_clk {
+                                                #clock-cells = <0>;
+                                                reg = <30>;
+                                        };
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
new file mode 100644
index 000000000000..98bc877a68ef
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
@@ -0,0 +1,26 @@
+/*
+ * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * Image Sensor Interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					isi_clk: isi_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
new file mode 100644
index 000000000000..485302e8233d
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
@@ -0,0 +1,26 @@
+/*
+ * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * LCD controller.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					lcdc_clk: lcdc_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
index 55731ffba764..57e89d1d0325 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
@@ -43,12 +43,23 @@
 				};
 			};
 
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb0_clk: macb0_clk {
+						#clock-cells = <0>;
+						reg = <24>;
+					};
+				};
+			};
+
 			macb0: ethernet@f802c000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
index 77425a627a94..663676c02861 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
@@ -31,12 +31,23 @@
 				};
 			};
 
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb1_clk: macb1_clk {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+				};
+			};
+
 			macb1: ethernet@f8030000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xf8030000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&macb1_clk>, <&macb1_clk>;
+				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index 6801106fa1f8..140217a54384 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -42,12 +42,23 @@
 				};
 			};
 
+			pmc: pmc@fffffc00 {
+				periphck {
+					usart3_clk: usart3_clk {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+				};
+			};
+
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x200>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 4a5ee5cc115a..8413e21192eb 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -23,6 +23,14 @@
 		};
 	};
 
+	slow_xtal {
+		clock-frequency = <32768>;
+	};
+
+	main_xtal {
+		clock-frequency = <12000000>;
+	};
+
 	ahb {
 		apb {
 			pinctrl@fffff400 {
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index f8674bcc4489..bb22842a0826 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -39,6 +39,11 @@
 		};
 	};
 
+	arm-pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <29>;
+	};
+
 	axi {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -65,9 +70,10 @@
 				#clock-cells = <1>;
 			};
 
-			reset-controller@88010000 {
+			rstc: reset-controller@88010000 {
 				compatible = "sirf,prima2-rstc";
 				reg = <0x88010000 0x1000>;
+				#reset-cells = <1>;
 			};
 
 			rsc-controller@88020000 {
@@ -166,6 +172,7 @@
 				compatible = "sirf,prima2-dspif";
 				reg = <0xa8000000 0x10000>;
 				interrupts = <9>;
+				resets = <&rstc 1>;
 			};
 
 			gps@a8010000 {
@@ -173,6 +180,7 @@
 				reg = <0xa8010000 0x10000>;
 				interrupts = <7>;
 				clocks = <&clks 9>;
+				resets = <&rstc 2>;
 			};
 
 			dsp@a9000000 {
@@ -180,6 +188,7 @@
 				reg = <0xa9000000 0x1000000>;
 				interrupts = <8>;
 				clocks = <&clks 8>;
+				resets = <&rstc 0>;
 			};
 		};
 
@@ -194,6 +203,7 @@
 				compatible = "sirf,prima2-tick";
 				reg = <0xb0020000 0x1000>;
 				interrupts = <0>;
+				clocks = <&clks 11>;
 			};
 
 			nand@b0030000 {
@@ -217,8 +227,8 @@
 				interrupts = <17>;
 				fifosize = <128>;
 				clocks = <&clks 13>;
-				sirf,uart-dma-rx-channel = <21>;
-				sirf,uart-dma-tx-channel = <2>;
+				dmas = <&dmac1 5>, <&dmac0 2>;
+				dma-names = "rx", "tx";
 			};
 
 			uart1: uart@b0060000 {
@@ -228,6 +238,7 @@
 				interrupts = <18>;
 				fifosize = <32>;
 				clocks = <&clks 14>;
+				dma-names = "no-rx", "no-tx";
 			};
 
 			uart2: uart@b0070000 {
@@ -237,8 +248,8 @@
 				interrupts = <19>;
 				fifosize = <128>;
 				clocks = <&clks 15>;
-				sirf,uart-dma-rx-channel = <6>;
-				sirf,uart-dma-tx-channel = <7>;
+				dmas = <&dmac0 6>, <&dmac0 7>;
+				dma-names = "rx", "tx";
 			};
 
 			usp0: usp@b0080000 {
@@ -248,8 +259,8 @@
 				interrupts = <20>;
 				fifosize = <128>;
 				clocks = <&clks 28>;
-				sirf,usp-dma-rx-channel = <17>;
-				sirf,usp-dma-tx-channel = <18>;
+				dmas = <&dmac1 1>, <&dmac1 2>;
+				dma-names = "rx", "tx";
 			};
 
 			usp1: usp@b0090000 {
@@ -259,8 +270,8 @@
 				interrupts = <21>;
 				fifosize = <128>;
 				clocks = <&clks 29>;
-				sirf,usp-dma-rx-channel = <14>;
-				sirf,usp-dma-tx-channel = <15>;
+				dmas = <&dmac0 14>, <&dmac0 15>;
+				dma-names = "rx", "tx";
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -269,6 +280,7 @@
 				reg = <0xb00b0000 0x10000>;
 				interrupts = <12>;
 				clocks = <&clks 24>;
+				#dma-cells = <1>;
 			};
 
 			dmac1: dma-controller@b0160000 {
@@ -277,6 +289,7 @@
 				reg = <0xb0160000 0x10000>;
 				interrupts = <13>;
 				clocks = <&clks 25>;
+				#dma-cells = <1>;
 			};
 
 			vip@b00C0000 {
@@ -293,9 +306,9 @@
 				reg = <0xb00d0000 0x10000>;
 				interrupts = <15>;
 				sirf,spi-num-chipselects = <1>;
-				cs-gpios = <&gpio 0 0>;
-				sirf,spi-dma-rx-channel = <25>;
-				sirf,spi-dma-tx-channel = <20>;
+				dmas = <&dmac1 9>,
+				     <&dmac1 4>;
+				dma-names = "rx", "tx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&clks 19>;
@@ -308,8 +321,9 @@
 				reg = <0xb0170000 0x10000>;
 				interrupts = <16>;
 				sirf,spi-num-chipselects = <1>;
-				sirf,spi-dma-rx-channel = <12>;
-				sirf,spi-dma-tx-channel = <13>;
+				dmas = <&dmac0 12>,
+				     <&dmac0 13>;
+				dma-names = "rx", "tx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&clks 20>;
@@ -550,6 +564,18 @@
                                                 sirf,function = "usp0_uart_nostreamctrl";
                                         };
                                 };
+				usp0_only_utfs_pins_a: usp0@2 {
+					usp0 {
+						sirf,pins = "usp0_only_utfs_grp";
+						sirf,function = "usp0_only_utfs";
+					};
+				};
+				usp0_only_urfs_pins_a: usp0@3 {
+					usp0 {
+						sirf,pins = "usp0_only_urfs_grp";
+						sirf,function = "usp0_only_urfs";
+					};
+				};
                                 usp1_pins_a: usp1@0 {
                                         usp1 {
                                                 sirf,pins = "usp1grp";
diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/axm5516-amarillo.dts
new file mode 100644
index 000000000000..a9d60471d9ff
--- /dev/null
+++ b/arch/arm/boot/dts/axm5516-amarillo.dts
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/boot/dts/axm5516-amarillo.dts
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00400000;
+
+#include "axm55xx.dtsi"
+#include "axm5516-cpus.dtsi"
+
+/ {
+	model = "Amarillo AXM5516";
+	compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0x02 0x00000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi
new file mode 100644
index 000000000000..b85f360cb125
--- /dev/null
+++ b/arch/arm/boot/dts/axm5516-cpus.dtsi
@@ -0,0 +1,204 @@
+/*
+ * arch/arm/boot/dts/axm5516-cpus.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+				core1 {
+					cpu = <&CPU9>;
+				};
+				core2 {
+					cpu = <&CPU10>;
+				};
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU12>;
+				};
+				core1 {
+					cpu = <&CPU13>;
+				};
+				core2 {
+					cpu = <&CPU14>;
+				};
+				core3 {
+					cpu = <&CPU15>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x00>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x01>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x02>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x03>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x102>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x103>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x200>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x201>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x202>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x203>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x300>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x301>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x302>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x303>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi
new file mode 100644
index 000000000000..ea288f0a1d39
--- /dev/null
+++ b/arch/arm/boot/dts/axm55xx.dtsi
@@ -0,0 +1,204 @@
+/*
+ * arch/arm/boot/dts/axm55xx.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/lsi,axm5516-clks.h>
+
+#include "skeleton64.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0	  = &serial0;
+		serial1   = &serial1;
+		serial2	  = &serial2;
+		serial3	  = &serial3;
+		timer	  = &timer0;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clk_ref0: clk_ref0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clk_ref1: clk_ref1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clk_ref2: clk_ref2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clks: clock-controller@2010020000 {
+			compatible = "lsi,axm5516-clks";
+			#clock-cells = <1>;
+			reg = <0x20 0x10020000 0 0x20000>;
+		};
+	};
+
+	gic: interrupt-controller@2001001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x20 0x01001000 0 0x1000>,
+		      <0x20 0x01002000 0 0x1000>,
+		      <0x20 0x01004000 0 0x2000>,
+		      <0x20 0x01006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		device_type = "soc";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		syscon: syscon@2010030000 {
+			compatible = "lsi,axxia-syscon", "syscon";
+			reg = <0x20 0x10030000 0 0x2000>;
+		};
+
+		reset: reset@2010031000 {
+			compatible = "lsi,axm55xx-reset";
+			syscon = <&syscon>;
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			serial0: uart@2010080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10080000 0 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial1: uart@2010081000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10081000 0 0x1000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial2: uart@2010082000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10082000 0 0x1000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial3: uart@2010083000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10083000 0 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			timer0: timer@2010091000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x20 0x10091000 0 0x1000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "okay";
+			};
+
+			gpio0: gpio@2010092000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0x20 0x10092000 0x00 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			gpio1: gpio@2010093000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0x20 0x10093000 0x00 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
+
+/*
+  Local Variables:
+  mode: C
+  End:
+*/
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 792fde1b7f75..6b05ae6d476f 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -14,6 +14,8 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
+#include "dt-bindings/clock/bcm281xx.h"
+
 #include "skeleton.dtsi"
 
 / {
@@ -43,7 +45,7 @@
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e000000 0x1000>;
-		clocks = <&uartb_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -53,7 +55,7 @@
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e001000 0x1000>;
-		clocks = <&uartb2_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -63,7 +65,7 @@
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e002000 0x1000>;
-		clocks = <&uartb3_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -73,7 +75,7 @@
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e003000 0x1000>;
-		clocks = <&uartb4_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -95,7 +97,7 @@
 		compatible = "brcm,kona-timer";
 		reg = <0x35006000 0x1000>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&hub_timer_clk>;
+		clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
 	};
 
 	gpio: gpio@35003000 {
@@ -118,7 +120,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f180000 0x10000>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sdio1_clk>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO1>;
 		status = "disabled";
 	};
 
@@ -126,7 +128,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f190000 0x10000>;
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sdio2_clk>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO2>;
 		status = "disabled";
 	};
 
@@ -134,7 +136,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1a0000 0x10000>;
 		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sdio3_clk>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
 		status = "disabled";
 	};
 
@@ -142,7 +144,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1b0000 0x10000>;
 		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sdio4_clk>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO4>;
 		status = "disabled";
 	};
 
@@ -157,7 +159,7 @@
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&bsc1_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC1>;
 		status = "disabled";
 	};
 
@@ -167,7 +169,7 @@
 		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&bsc2_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC2>;
 		status = "disabled";
 	};
 
@@ -177,7 +179,7 @@
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&bsc3_clk>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC3>;
 		status = "disabled";
 	};
 
@@ -187,105 +189,199 @@
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&pmu_bsc_clk>;
+		clocks = <&aon_ccu BCM281XX_AON_CCU_PMU_BSC>;
+		status = "disabled";
+	};
+
+	pwm: pwm@3e01a000 {
+		compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
+		reg = <0x3e01a000 0xcc>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
+		#pwm-cells = <3>;
 		status = "disabled";
 	};
 
 	clocks {
-		bsc1_clk: bsc1 {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		root_ccu: root_ccu {
+			compatible = "brcm,bcm11351-root-ccu";
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		hub_ccu: hub_ccu {
+			compatible = "brcm,bcm11351-hub-ccu";
+			reg = <0x34000000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "tmon_1m";
+		};
+
+		aon_ccu: aon_ccu {
+			compatible = "brcm,bcm11351-aon-ccu";
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer",
+					     "pmu_bsc",
+					     "pmu_bsc_var";
+		};
+
+		master_ccu: master_ccu {
+			compatible = "brcm,bcm11351-master-ccu";
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "usb_ic",
+					     "hsic2_48m",
+					     "hsic2_12m";
+		};
+
+		slave_ccu: slave_ccu {
+			compatible = "brcm,bcm11351-slave-ccu";
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "uartb4",
+					     "ssp0",
+					     "ssp2",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "pwm";
+		};
+
+		ref_1m_clk: ref_1m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <1000000>;
 		};
 
-		bsc2_clk: bsc2 {
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
 		};
 
-		bsc3_clk: bsc3 {
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <13000000>;
-			#clock-cells = <0>;
 		};
 
-		pmu_bsc_clk: pmu_bsc {
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <13000000>;
-			#clock-cells = <0>;
 		};
 
-		hub_timer_clk: hub_timer {
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+		dft_19_5m_clk: dft_19_5m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
 		};
 
-		pwm_clk: pwm {
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <26000000>;
-			#clock-cells = <0>;
 		};
 
-		sdio1_clk: sdio1 {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
+		ref_cx40_clk: ref_cx40 {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
 		};
 
-		sdio2_clk: sdio2 {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
+		ref_52m_clk: ref_52m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
 		};
 
-		sdio3_clk: sdio3 {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
+		var_52m_clk: var_52m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
 		};
 
-		sdio4_clk: sdio4 {
+		usb_otg_ahb_clk: usb_otg_ahb {
 			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
+			clock-frequency = <52000000>;
 			#clock-cells = <0>;
 		};
 
-		tmon_1m_clk: tmon_1m {
-			compatible = "fixed-clock";
-			clock-frequency = <1000000>;
+		ref_96m_clk: ref_96m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
 		};
 
-		uartb_clk: uartb {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+		var_96m_clk: var_96m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
 		};
 
-		uartb2_clk: uartb2 {
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
 		};
 
-		uartb3_clk: uartb3 {
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
 		};
 
-		uartb4_clk: uartb4 {
+		ref_208m_clk: ref_208m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+			clock-frequency = <208000000>;
+		};
+
+		var_208m_clk: var_208m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <208000000>;
 		};
 
-		usb_otg_ahb_clk: usb_otg_ahb {
+		ref_312m_clk: ref_312m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
+			clock-frequency = <312000000>;
+		};
+
+		var_312m_clk: var_312m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <312000000>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
index 396b70459cdc..e87cb26ddf84 100644
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ b/arch/arm/boot/dts/bcm21664-garnet.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 Broadcom Corporation
+ * Copyright (C) 2014 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -13,11 +13,13 @@
 
 /dts-v1/;
 
-#include "bcm11351.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm21664.dtsi"
 
 / {
-	model = "BCM11351 BRT board";
-	compatible = "brcm,bcm11351-brt", "brcm,bcm11351";
+	model = "BCM21664 Garnet board";
+	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
 
 	memory {
 		reg = <0x80000000 0x40000000>; /* 1 GB */
@@ -40,7 +42,7 @@
 
 	sdio4: sdio@3f1b0000 {
 		max-frequency = <48000000>;
-		cd-gpios = <&gpio 14 0>;
+		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
new file mode 100644
index 000000000000..8b366822bb43
--- /dev/null
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -0,0 +1,338 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "dt-bindings/clock/bcm21664.h"
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "BCM21664 SoC";
+	compatible = "brcm,bcm21664";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gic: interrupt-controller@3ff00100 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x3ff01000 0x1000>,
+		      <0x3ff00100 0x100>;
+	};
+
+	smc@0x3404e000 {
+		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
+		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
+	};
+
+	uart@3e000000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e000000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e001000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e001000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	L2: l2-cache {
+		compatible = "arm,pl310-cache";
+		reg = <0x3ff20000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	brcm,resetmgr@35001f00 {
+		compatible = "brcm,bcm21664-resetmgr";
+		reg = <0x35001f00 0x24>;
+	};
+
+	timer@35006000 {
+		compatible = "brcm,kona-timer";
+		reg = <0x35006000 0x1c>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+	};
+
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x524>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	sdio1: sdio@3f180000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f180000 0x801c>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+		status = "disabled";
+	};
+
+	sdio2: sdio@3f190000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f190000 0x801c>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+		status = "disabled";
+	};
+
+	sdio3: sdio@3f1a0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1a0000 0x801c>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+		status = "disabled";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1b0000 0x801c>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+		status = "disabled";
+	};
+
+	i2c@3e016000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e016000 0x70>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+		status = "disabled";
+	};
+
+	i2c@3e017000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e017000 0x70>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+		status = "disabled";
+	};
+
+	i2c@3e018000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e018000 0x70>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+		status = "disabled";
+	};
+
+	i2c@3e01c000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e01c000 0x70>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu {
+			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu {
+			compatible = BCM21664_DT_AON_CCU_COMPAT;
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		master_ccu: master_ccu {
+			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+
+		slave_ccu: slave_ccu {
+			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+	};
+
+	usbotg: usb@3f120000 {
+		compatible = "snps,dwc2";
+		reg = <0x3f120000 0x10000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index 5ff2382a49e4..9ce91dd60cb6 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -46,27 +46,36 @@
 
 	i2c@3500d000 {
 		status="okay";
-		clock-frequency = <400000>;
-	};
+		clock-frequency = <100000>;
 
-	sdio1: sdio@3f180000 {
-		max-frequency = <48000000>;
-		status = "okay";
+		pmu: pmu@8 {
+			reg = <0x08>;
+		};
 	};
 
 	sdio2: sdio@3f190000 {
 		non-removable;
 		max-frequency = <48000000>;
+		vmmc-supply = <&camldo1_reg>;
+		vqmmc-supply = <&iosr1_reg>;
 		status = "okay";
 	};
 
 	sdio4: sdio@3f1b0000 {
 		max-frequency = <48000000>;
 		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		vmmc-supply = <&sdldo_reg>;
+		vqmmc-supply = <&sdxldo_reg>;
+		status = "okay";
+	};
+
+	pwm: pwm@3e01a000 {
 		status = "okay";
 	};
 
 	usbotg: usb@3f120000 {
+		vusb_d-supply = <&usbldo_reg>;
+		vusb_a-supply = <&iosr1_reg>;
 		status = "okay";
 	};
 
@@ -74,3 +83,39 @@
 		status = "okay";
 	};
 };
+
+#include "bcm59056.dtsi"
+
+&pmu {
+	compatible = "brcm,bcm59056";
+	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+	regulators {
+		camldo1_reg: camldo1 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		sdldo_reg: sdldo {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		sdxldo_reg: sdxldo {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		usbldo_reg: usbldo {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		iosr1_reg: iosr1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index b021c96d3ba1..b8473c43e888 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -15,39 +15,52 @@
 		#size-cells = <1>;
 		ranges = <0x7e000000 0x20000000 0x02000000>;
 
-		timer {
+		timer@7e003000 {
 			compatible = "brcm,bcm2835-system-timer";
 			reg = <0x7e003000 0x1000>;
 			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
 			clock-frequency = <1000000>;
 		};
 
-		intc: interrupt-controller {
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xf00>;
+			interrupts = <1 16>,
+				     <1 17>,
+				     <1 18>,
+				     <1 19>,
+				     <1 20>,
+				     <1 21>,
+				     <1 22>,
+				     <1 23>,
+				     <1 24>,
+				     <1 25>,
+				     <1 26>,
+				     <1 27>,
+				     <1 28>;
+
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x7f35>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
 			compatible = "brcm,bcm2835-armctrl-ic";
 			reg = <0x7e00b200 0x200>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
 
-		watchdog {
+		watchdog@7e100000 {
 			compatible = "brcm,bcm2835-pm-wdt";
 			reg = <0x7e100000 0x28>;
 		};
 
-		rng {
+		rng@7e104000 {
 			compatible = "brcm,bcm2835-rng";
 			reg = <0x7e104000 0x10>;
 		};
 
-		uart@20201000 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201000 0x1000>;
-			interrupts = <2 25>;
-			clock-frequency = <3000000>;
-			arm,primecell-periphid = <0x00241011>;
-		};
-
-		gpio: gpio {
+		gpio: gpio@7e200000 {
 			compatible = "brcm,bcm2835-gpio";
 			reg = <0x7e200000 0xb4>;
 			/*
@@ -70,7 +83,25 @@
 			#interrupt-cells = <2>;
 		};
 
-		spi: spi@20204000 {
+		uart@7e201000 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x1000>;
+			interrupts = <2 25>;
+			clock-frequency = <3000000>;
+			arm,primecell-periphid = <0x00241011>;
+		};
+
+		i2s: i2s@7e203000 {
+			compatible = "brcm,bcm2835-i2s";
+			reg = <0x7e203000 0x20>,
+			      <0x7e101098 0x02>;
+
+			dmas = <&dma 2>,
+			       <&dma 3>;
+			dma-names = "tx", "rx";
+		};
+
+		spi: spi@7e204000 {
 			compatible = "brcm,bcm2835-spi";
 			reg = <0x7e204000 0x1000>;
 			interrupts = <2 22>;
@@ -90,7 +121,15 @@
 			status = "disabled";
 		};
 
-		i2c1: i2c@20804000 {
+		sdhci: sdhci@7e300000 {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clk_mmc>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@7e804000 {
 			compatible = "brcm,bcm2835-i2c";
 			reg = <0x7e804000 0x1000>;
 			interrupts = <2 21>;
@@ -100,19 +139,15 @@
 			status = "disabled";
 		};
 
-		sdhci: sdhci {
-			compatible = "brcm,bcm2835-sdhci";
-			reg = <0x7e300000 0x100>;
-			interrupts = <2 30>;
-			clocks = <&clk_mmc>;
-			status = "disabled";
-		};
-
-		usb {
+		usb@7e980000 {
 			compatible = "brcm,bcm2835-usb";
 			reg = <0x7e980000 0x10000>;
 			interrupts = <1 9>;
 		};
+
+		arm-pmu {
+			compatible = "arm,arm1176-pmu";
+		};
 	};
 
 	clocks {
@@ -120,24 +155,27 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		clk_mmc: mmc {
+		clk_mmc: clock@0 {
 			compatible = "fixed-clock";
 			reg = <0>;
 			#clock-cells = <0>;
+			clock-output-names = "mmc";
 			clock-frequency = <100000000>;
 		};
 
-		clk_i2c: i2c {
+		clk_i2c: clock@1 {
 			compatible = "fixed-clock";
 			reg = <1>;
 			#clock-cells = <0>;
+			clock-output-names = "i2c";
 			clock-frequency = <250000000>;
 		};
 
-		clk_spi: spi {
+		clk_spi: clock@2 {
 			compatible = "fixed-clock";
 			reg = <2>;
 			#clock-cells = <0>;
+			clock-output-names = "spi";
 			clock-frequency = <250000000>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
new file mode 100644
index 000000000000..3b5259de5a38
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -0,0 +1,35 @@
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for Netgear R6250 V1
+ *
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "netgear,r6250v1", "brcm,bcm4708";
+	model = "Netgear R6250 V1 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chipcommonA {
+		uart0: serial@0300 {
+			status = "okay";
+		};
+
+		uart1: serial@0400 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
new file mode 100644
index 000000000000..31141e83fedd
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM4708 SoC.
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+	compatible = "brcm,bcm4708";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+	};
+
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
new file mode 100644
index 000000000000..53c624f766b4
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chipcommonA {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x00001000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@0300 {
+			compatible = "ns16550";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart1: serial@0400 {
+			compatible = "ns16550";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+	};
+
+	mpcore {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19020000 0x00003000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scu@0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x0000 0x100>;
+		};
+
+		timer@0200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x0200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_periph>;
+		};
+
+		local-timer@0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x0600 0x100>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_periph>;
+		};
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x0100 0x100>;
+		};
+
+		L2: cache-controller@2000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x2000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* As long as we do not have a real clock driver us this
+		 * fixed clock */
+		clk_periph: periph {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi
new file mode 100644
index 000000000000..066adfb10bd5
--- /dev/null
+++ b/arch/arm/boot/dts/bcm59056.dtsi
@@ -0,0 +1,95 @@
+/*
+* Copyright 2014 Linaro Limited
+* Author: Matt Porter <mporter@linaro.org>
+*
+* This program is free software; you can redistribute it and/or modify it
+* under  the terms of the GNU General  Public License as published by the
+* Free Software Foundation;  either version 2 of the License, or (at your
+* option) any later version.
+*/
+
+&pmu {
+	compatible = "brcm,bcm59056";
+	regulators {
+		rfldo_reg: rfldo {
+		};
+
+		camldo1_reg: camldo1 {
+		};
+
+		camldo2_reg: camldo2 {
+		};
+
+		simldo1_reg: simldo1 {
+		};
+
+		simldo2_reg: simldo2 {
+		};
+
+		sdldo_reg: sdldo {
+		};
+
+		sdxldo_reg: sdxldo {
+		};
+
+		mmcldo1_reg: mmcldo1 {
+		};
+
+		mmcldo2_reg: mmcldo2 {
+		};
+
+		audldo_reg: audldo {
+		};
+
+		micldo_reg: micldo {
+		};
+
+		usbldo_reg: usbldo {
+		};
+
+		vibldo_reg: vibldo {
+		};
+
+		csr_reg: csr {
+		};
+
+		iosr1_reg: iosr1 {
+		};
+
+		iosr2_reg: iosr2 {
+		};
+
+		msr_reg: msr {
+		};
+
+		sdsr1_reg: sdsr1 {
+		};
+
+		sdsr2_reg: sdsr2 {
+		};
+
+		vsr_reg: vsr {
+		};
+
+		gpldo1_reg: gpldo1 {
+		};
+
+		gpldo2_reg: gpldo2 {
+		};
+
+		gpldo3_reg: gpldo3 {
+		};
+
+		gpldo4_reg: gpldo4 {
+		};
+
+		gpldo5_reg: gpldo5 {
+		};
+
+		gpldo6_reg: gpldo6 {
+		};
+
+		vbus_reg: vbus {
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 56a1af2f1052..2477dac4d643 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -12,6 +12,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/clock/berlin2.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -37,24 +38,10 @@
 		};
 	};
 
-	clocks {
-		smclk: sysmgr-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		cfgclk: cfg-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <100000000>;
-		};
-
-		sysclk: system-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <400000000>;
-		};
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
 	};
 
 	soc {
@@ -72,6 +59,11 @@
 			cache-level = <2>;
 		};
 
+		scu: snoop-control-unit@ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x58>;
+		};
+
 		gic: interrupt-controller@ad1000 {
 			compatible = "arm,cortex-a9-gic";
 			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
@@ -83,7 +75,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
 			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysclk>;
+			clocks = <&chip CLKID_TWD>;
 		};
 
 		apb@e80000 {
@@ -94,11 +86,83 @@
 			ranges = <0 0xe80000 0x10000>;
 			interrupt-parent = <&aic>;
 
+			gpio0: gpio@0400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@0800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@0c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
 			timer0: timer@2c00 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c00 0x14>;
 				interrupts = <8>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -107,7 +171,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c14 0x14>;
 				interrupts = <9>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -116,7 +180,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c28 0x14>;
 				interrupts = <10>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -125,7 +189,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c3c 0x14>;
 				interrupts = <11>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -134,7 +198,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c50 0x14>;
 				interrupts = <12>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -143,7 +207,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c64 0x14>;
 				interrupts = <13>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -152,7 +216,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c78 0x14>;
 				interrupts = <14>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -161,7 +225,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c8c 0x14>;
 				interrupts = <15>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -176,6 +240,14 @@
 			};
 		};
 
+		chip: chip-control@ea0000 {
+			compatible = "marvell,berlin2-chip-ctrl";
+			#clock-cells = <1>;
+			reg = <0xea0000 0x400>;
+			clocks = <&refclk>;
+			clock-names = "refclk";
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -184,13 +256,48 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			sm_gpio1: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+				};
+			};
+
+			sm_gpio0: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <11>;
+				};
+			};
+
 			uart0: serial@9000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x9000 0x100>;
 				reg-shift = <2>;
 				reg-io-width = <1>;
 				interrupts = <8>;
-				clocks = <&smclk>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
 
@@ -200,7 +307,9 @@
 				reg-shift = <2>;
 				reg-io-width = <1>;
 				interrupts = <9>;
-				clocks = <&smclk>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart1_pmux>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
 
@@ -210,10 +319,32 @@
 				reg-shift = <2>;
 				reg-io-width = <1>;
 				interrupts = <10>;
-				clocks = <&smclk>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart2_pmux>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
 
+			sysctrl: system-controller@d000 {
+				compatible = "marvell,berlin2-system-ctrl";
+				reg = <0xd000 0x100>;
+
+				uart0_pmux: uart0-pmux {
+					groups = "GSM4";
+					function = "uart0";
+				};
+
+				uart1_pmux: uart1-pmux {
+					groups = "GSM5";
+					function = "uart1";
+				};
+
+				uart2_pmux: uart2-pmux {
+					groups = "GSM3";
+					function = "uart2";
+				};
+			};
+
 			sic: interrupt-controller@e000 {
 				compatible = "snps,dw-apb-ictl";
 				reg = <0xe000 0x400>;
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 094968c27533..cc1df65da504 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -12,6 +12,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/clock/berlin2.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -30,24 +31,10 @@
 		};
 	};
 
-	clocks {
-		smclk: sysmgr-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		cfgclk: cfg-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <75000000>;
-		};
-
-		sysclk: system-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <300000000>;
-		};
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
 	};
 
 	soc {
@@ -76,7 +63,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
 			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysclk>;
+			clocks = <&chip CLKID_TWD>;
 		};
 
 		apb@e80000 {
@@ -87,11 +74,83 @@
 			ranges = <0 0xe80000 0x10000>;
 			interrupt-parent = <&aic>;
 
+			gpio0: gpio@0400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@0800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@0c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
 			timer0: timer@2c00 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c00 0x14>;
 				interrupts = <8>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -100,7 +159,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c14 0x14>;
 				interrupts = <9>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -109,7 +168,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c28 0x14>;
 				interrupts = <10>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -118,7 +177,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c3c 0x14>;
 				interrupts = <11>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -127,7 +186,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c50 0x14>;
 				interrupts = <12>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -136,7 +195,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c64 0x14>;
 				interrupts = <13>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -145,7 +204,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c78 0x14>;
 				interrupts = <14>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -154,7 +213,7 @@
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c8c 0x14>;
 				interrupts = <15>;
-				clocks = <&cfgclk>;
+				clocks = <&chip CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -169,6 +228,19 @@
 			};
 		};
 
+		chip: chip-control@ea0000 {
+			compatible = "marvell,berlin2cd-chip-ctrl";
+			#clock-cells = <1>;
+			reg = <0xea0000 0x400>;
+			clocks = <&refclk>;
+			clock-names = "refclk";
+
+			uart0_pmux: uart0-pmux {
+				groups = "G6";
+				function = "uart0";
+			};
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -177,13 +249,45 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			sm_gpio1: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+				};
+			};
+
+			sm_gpio0: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+				};
+			};
+
 			uart0: serial@9000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x9000 0x100>;
 				reg-shift = <2>;
 				reg-io-width = <1>;
 				interrupts = <8>;
-				clocks = <&smclk>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
 
@@ -193,10 +297,15 @@
 				reg-shift = <2>;
 				reg-io-width = <1>;
 				interrupts = <9>;
-				clocks = <&smclk>;
+				clocks = <&refclk>;
 				status = "disabled";
 			};
 
+			sysctrl: system-controller@d000 {
+				compatible = "marvell,berlin2cd-system-ctrl";
+				reg = <0xd000 0x100>;
+			};
+
 			sic: interrupt-controller@e000 {
 				compatible = "snps,dw-apb-ictl";
 				reg = <0xe000 0x400>;
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
new file mode 100644
index 000000000000..995150f93795
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "berlin2q.dtsi"
+
+/ {
+	model = "Marvell BG2-Q DMP";
+	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+
+	choosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+};
+
+&sdhci1 {
+	broken-cd;
+	sdhci,wp-inverted;
+	status = "okay";
+};
+
+&sdhci2 {
+	non-removable;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
new file mode 100644
index 000000000000..635a16a64cb4
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -0,0 +1,363 @@
+/*
+ * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/berlin2q.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
+	compatible = "marvell,berlin2q", "marvell,berlin";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <3>;
+		};
+	};
+
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0 0xf7000000 0x1000000>;
+		interrupt-parent = <&gic>;
+
+		sdhci0: sdhci@ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@ab0800 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0800 0x200>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@ab1000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab1000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			status = "disabled";
+		};
+
+		l2: l2-cache-controller@ac0000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xac0000 0x1000>;
+			cache-level = <2>;
+		};
+
+		scu: snoop-control-unit@ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x58>;
+		};
+
+		local-timer@ad0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xad0600 0x20>;
+			clocks = <&chip CLKID_TWD>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@ad1000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xad1000 0x1000>, <0xad0100 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apb@e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio@0400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@0800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@0c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			timer0: timer@2c00 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c00 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				interrupts = <8>;
+			};
+
+			timer1: timer@2c14 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c14 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer2: timer@2c28 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c28 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer3: timer@2c3c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c3c 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer4: timer@2c50 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c50 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer5: timer@2c64 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c64 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer6: timer@2c78 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c78 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer7: timer@2c8c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c8c 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@3800 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3800 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio4: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			gpio5: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+		};
+
+		chip: chip-control@ea0000 {
+			compatible = "marvell,berlin2q-chip-ctrl";
+			#clock-cells = <1>;
+			reg = <0xea0000 0x400>, <0xdd0170 0x10>;
+			clocks = <&refclk>;
+			clock-names = "refclk";
+		};
+
+		apb@fc0000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xfc0000 0x10000>;
+			interrupt-parent = <&sic>;
+
+			uart0: uart@9000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x9000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <8>;
+				clocks = <&refclk>;
+				reg-shift = <2>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart1: uart@a000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xa000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <9>;
+				clocks = <&refclk>;
+				reg-shift = <2>;
+				pinctrl-0 = <&uart1_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sysctrl: pin-controller@d000 {
+				compatible = "marvell,berlin2q-system-ctrl";
+				reg = <0xd000 0x100>;
+
+				uart0_pmux: uart0-pmux {
+					groups = "GSM12";
+					function = "uart0";
+				};
+
+				uart1_pmux: uart1-pmux {
+					groups = "GSM14";
+					function = "uart1";
+				};
+			};
+
+			sic: interrupt-controller@e000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0xe000 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 187fd46b7b5e..3b891dd20993 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -186,6 +186,11 @@
 				reg = <0x20000 0x80>, <0x800100 0x8>;
 			};
 
+			sysc: system-ctrl@20000 {
+				compatible = "marvell,orion-system-controller";
+				reg = <0x20000 0x110>;
+			};
+
 			bridge_intc: bridge-interrupt-ctrl@20110 {
 				compatible = "marvell,orion-bridge-intc";
 				interrupt-controller;
@@ -210,6 +215,14 @@
 				clocks = <&core_clk 0>;
 			};
 
+			watchdog@20300 {
+				compatible = "marvell,orion-wdt";
+				reg = <0x20300 0x28>, <0x20108 0x4>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <3>;
+				clocks = <&core_clk 0>;
+			};
+
 			crypto: crypto-engine@30000 {
 				compatible = "marvell,orion-crypto";
 				reg = <0x30000 0x10000>,
@@ -381,7 +394,8 @@
 
 			pinctrl: pin-ctrl@d0200 {
 				compatible = "marvell,dove-pinctrl";
-				reg = <0xd0200 0x10>;
+				reg = <0xd0200 0x14>,
+				      <0xd0440 0x04>;
 				clocks = <&gate_clk 22>;
 
 				pmx_gpio_0: pmx-gpio-0 {
@@ -603,6 +617,12 @@
 				reg = <0xd8500 0x20>;
 			};
 
+			gconf: global-config@e802c {
+				compatible = "marvell,dove-global-config",
+				             "syscon";
+				reg = <0xe802c 0x14>;
+			};
+
 			gpio2: gpio-ctrl@e8400 {
 				compatible = "marvell,orion-gpio";
 				#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 5babba0a3a75..4adc28039c30 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -7,11 +7,11 @@
  */
 /dts-v1/;
 
-#include "dra7.dtsi"
+#include "dra74x.dtsi"
 
 / {
-	model = "TI DRA7";
-	compatible = "ti,dra7-evm", "ti,dra752", "ti,dra7";
+	model = "TI DRA742";
+	compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
 
 	memory {
 		device_type = "memory";
@@ -93,6 +93,64 @@
 			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
 		>;
 	};
+
+	qspi1_pins: pinmux_qspi1_pins {
+		pinctrl-single,pins = <
+			0x4c (PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
+			0x50 (PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
+			0x74 (PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
+			0x78 (PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
+			0x7c (PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
+			0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
+			0x84 (PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
+			0x88 (PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
+			0xb8 (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
+			0xbc (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
+		>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+                pinctrl-single,pins = <
+			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+                >;
+        };
+
+	usb2_pins: pinmux_usb2_pins {
+                pinctrl-single,pins = <
+			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+                >;
+        };
+
+	nand_flash_x16: nand_flash_x16 {
+		/* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
+		 * So NAND flash requires following switch settings:
+		 * SW5.9 (GPMC_WPN) = LOW
+		 * SW5.1 (NAND_BOOTn) = HIGH */
+		pinctrl-single,pins = <
+			0x0 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
+			0x4 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
+			0x8 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2	*/
+			0xc 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3	*/
+			0x10	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4	*/
+			0x14	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5	*/
+			0x18	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6	*/
+			0x1c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7	*/
+			0x20	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad8	*/
+			0x24	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad9	*/
+			0x28	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad10	*/
+			0x2c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad11	*/
+			0x30	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad12	*/
+			0x34	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad13	*/
+			0x38	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad14	*/
+			0x3c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad15	*/
+			0xd8	(PIN_INPUT_PULLUP  | MUX_MODE0)	/* gpmc_wait0	*/
+			0xcc	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_wen	*/
+			0xb4	(PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0	*/
+			0xc4	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_advn_ale */
+			0xc8	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_oen_ren	 */
+			0xd0	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
+		>;
+	};
 };
 
 &i2c1 {
@@ -273,3 +331,167 @@
 &cpu0 {
 	cpu0-supply = <&smps123_reg>;
 };
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi1_pins>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000010000>;
+		};
+		partition@1 {
+			label = "QSPI.SPL.backup1";
+			reg = <0x00010000 0x00010000>;
+		};
+		partition@2 {
+			label = "QSPI.SPL.backup2";
+			reg = <0x00020000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.SPL.backup3";
+			reg = <0x00030000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00010000>;
+		};
+		partition@6 {
+			label = "QSPI.u-boot-env";
+			reg = <0x00150000 0x00010000>;
+		};
+		partition@7 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x00160000 0x0010000>;
+		};
+		partition@8 {
+			label = "QSPI.kernel";
+			reg = <0x00170000 0x0800000>;
+		};
+		partition@9 {
+			label = "QSPI.file-system";
+			reg = <0x00970000 0x01690000>;
+		};
+	};
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&usb2 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_pins>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x16>;
+	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		reg = <0 0 4>;		/* device IO registers */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>;
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,we-on-ns = <5>;
+		gpmc,we-off-ns = <25>;
+		gpmc,oe-on-ns = <2>;
+		gpmc,oe-off-ns = <20>;
+		gpmc,access-ns = <20>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,wait-pin = <0>;
+		gpmc,wait-on-read;
+		gpmc,wait-on-write;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x000c0000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x001c0000 0x00020000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env";
+			reg = <0x001e0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x0f600000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 1fd75aa4639d..c29945e07c5a 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -33,28 +33,6 @@
 		serial5 = &uart6;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			operating-points = <
-				/* kHz    uV */
-				1000000	1060000
-				1176000	1160000
-				>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-	};
-
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -75,7 +53,7 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is uses for IPs
+	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
 	 */
 	soc {
@@ -89,18 +67,18 @@
 	/*
 	 * XXX: Use a flat representation of the SOC interconnect.
 	 * The real OMAP interconnect network is quite complex.
-	 * Since that will not bring real advantage to represent that in DT for
+	 * Since it will not bring real advantage to represent that in DT for
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
+		compatible = "ti,dra7-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2";
-		reg = <0x44000000 0x2000>,
-		      <0x44800000 0x3000>;
+		reg = <0x44000000 0x1000000>,
+		      <0x45000000 0x1000>;
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -149,6 +127,22 @@
 			ti,hwmods = "counter_32k";
 		};
 
+		dra7_ctrl_general: tisyscon@4a002e00 {
+			compatible = "syscon";
+			reg = <0x4a002e00 0x7c>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0 0x4>;
+			syscon = <&dra7_ctrl_general>;
+			pbias_mmc_reg: pbias_mmc_omap5 {
+				regulator-name = "pbias_mmc_omap5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		dra7_pmx_core: pinmux@4a003400 {
 			compatible = "pinctrl-single";
 			reg = <0x4a003400 0x0464>;
@@ -464,6 +458,20 @@
 			ti,hwmods = "wd_timer2";
 		};
 
+		hwspinlock: spinlock@4a0f6000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x4a0f6000 0x1000>;
+			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
+		};
+
+		dmm@4e000000 {
+			compatible = "ti,omap5-dmm";
+			reg = <0x4e000000 0x800>;
+			interrupts = <0 113 0x4>;
+			ti,hwmods = "dmm";
+		};
+
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48070000 0x100>;
@@ -524,6 +532,7 @@
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
 			status = "disabled";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
@@ -559,6 +568,138 @@
 			status = "disabled";
 		};
 
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
+			      <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+			      <0x4ae0c158 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x80>;
+			/* LDOVBBMPU_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMPU_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1060000		0	0x0	0 0x02000000 0x01F00000
+			1160000		0	0x4	0 0x02000000 0x01F00000
+			1210000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_ivahd: regulator-abb-ivahd {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_ivahd";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
+			      <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+			      <0x4a002470 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x40000000>;
+			/* LDOVBBIVA_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBIVA_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1055000		0	0x0	0 0x02000000 0x01F00000
+			1150000		0	0x4	0 0x02000000 0x01F00000
+			1250000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_dspeve: regulator-abb-dspeve {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_dspeve";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
+			      <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+			      <0x4a00246c 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x20000000>;
+			/* LDOVBBDSPEVE_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBDSPEVE_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1055000		0	0x0	0 0x02000000 0x01F00000
+			1150000		0	0x4	0 0x02000000 0x01F00000
+			1250000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_gpu: regulator-abb-gpu {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_gpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
+			      <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+			      <0x4ae0c154 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x10000000>;
+			/* LDOVBBGPU_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBGPU_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1090000		0	0x0	0 0x02000000 0x01F00000
+			1210000		0	0x4	0 0x02000000 0x01F00000
+			1280000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x48098000 0x200>;
@@ -621,6 +762,228 @@
 			dma-names = "tx0", "rx0";
 			status = "disabled";
 		};
+
+		qspi: qspi@4b300000 {
+			compatible = "ti,dra7xxx-qspi";
+			reg = <0x4b300000 0x100>;
+			reg-names = "qspi_base";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "qspi";
+			clocks = <&qspi_gfclk_div>;
+			clock-names = "fck";
+			num-cs = <4>;
+			interrupts = <0 343 0x4>;
+			status = "disabled";
+		};
+
+		omap_control_sata: control-phy@4a002374 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002374 0x4>;
+			reg-names = "power";
+			clocks = <&sys_clkin1>;
+			clock-names = "sysclk";
+		};
+
+		/* OCP2SCP3 */
+		ocp2scp@4a090000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x4a090000 0x20>;
+			ti,hwmods = "ocp2scp3";
+			sata_phy: phy@4A096000 {
+				compatible = "ti,phy-pipe3-sata";
+				reg = <0x4A096000 0x80>, /* phy_rx */
+				      <0x4A096400 0x64>, /* phy_tx */
+				      <0x4A096800 0x40>; /* pll_ctrl */
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				ctrl-module = <&omap_control_sata>;
+				clocks = <&sys_clkin1>;
+				clock-names = "sysclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		sata: sata@4a141100 {
+			compatible = "snps,dwc-ahci";
+			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			clocks = <&sata_ref_clk>;
+			ti,hwmods = "sata";
+		};
+
+		omap_control_usb2phy1: control-phy@4a002300 {
+			compatible = "ti,control-phy-usb2";
+			reg = <0x4a002300 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usb3phy1: control-phy@4a002370 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002370 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usb2phy2: control-phy@0x4a002e74 {
+			compatible = "ti,control-phy-usb2-dra7";
+			reg = <0x4a002e74 0x4>;
+			reg-names = "power";
+		};
+
+		/* OCP2SCP1 */
+		ocp2scp@4a080000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x4a080000 0x20>;
+			ti,hwmods = "ocp2scp1";
+
+			usb2_phy1: phy@4a084000 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4a084000 0x400>;
+				ctrl-module = <&omap_control_usb2phy1>;
+				clocks = <&usb_phy1_always_on_clk32k>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names =	"wkupclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+
+			usb2_phy2: phy@4a085000 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4a085000 0x400>;
+				ctrl-module = <&omap_control_usb2phy2>;
+				clocks = <&usb_phy2_always_on_clk32k>,
+					 <&usb_otg_ss2_refclk960m>;
+				clock-names =	"wkupclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+
+			usb3_phy1: phy@4a084400 {
+				compatible = "ti,omap-usb3";
+				reg = <0x4a084400 0x80>,
+				      <0x4a084800 0x64>,
+				      <0x4a084c00 0x40>;
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				ctrl-module = <&omap_control_usb3phy1>;
+				clocks = <&usb_phy3_always_on_clk32k>,
+					 <&sys_clkin1>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names =	"wkupclk",
+						"sysclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		omap_dwc3_1@48880000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss1";
+			reg = <0x48880000 0x10000>;
+			interrupts = <0 77 4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			usb1: usb@48890000 {
+				compatible = "snps,dwc3";
+				reg = <0x48890000 0x17000>;
+				interrupts = <0 76 4>;
+				phys = <&usb2_phy1>, <&usb3_phy1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				maximum-speed = "super-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		omap_dwc3_2@488c0000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss2";
+			reg = <0x488c0000 0x10000>;
+			interrupts = <0 92 4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			usb2: usb@488d0000 {
+				compatible = "snps,dwc3";
+				reg = <0x488d0000 0x17000>;
+				interrupts = <0 78 4>;
+				phys = <&usb2_phy2>;
+				phy-names = "usb2-phy";
+				tx-fifo-resize;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
+		omap_dwc3_3@48900000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss3";
+			reg = <0x48900000 0x10000>;
+		/*	interrupts = <0 TBD 4>; */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			status = "disabled";
+			usb3: usb@48910000 {
+				compatible = "snps,dwc3";
+				reg = <0x48910000 0x17000>;
+		/*		interrupts = <0 93 4>; */
+				tx-fifo-resize;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		omap_dwc3_4@48940000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss4";
+			reg = <0x48940000 0x10000>;
+		/*	interrupts = <0 TBD 4>; */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			status = "disabled";
+			usb4: usb@48950000 {
+				compatible = "snps,dwc3";
+				reg = <0x48950000 0x17000>;
+		/*		interrupts = <0 TBD 4>; */
+				tx-fifo-resize;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		elm: elm@48078000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48078000 0xfc0>;      /* device IO registers */
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "elm";
+			status = "disabled";
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x50000000 0x37c>;      /* device IO registers */
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
new file mode 100644
index 000000000000..514702348818
--- /dev/null
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+
+/ {
+	model = "TI DRA722";
+	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1024 MB */
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
new file mode 100644
index 000000000000..f1ec22f6ebf4
--- /dev/null
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
new file mode 100644
index 000000000000..a4e8bb9f95c0
--- /dev/null
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000	1060000
+				1176000	1160000
+				>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index e96da9a898ad..c7676871d9c0 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1386,6 +1386,14 @@
 		ti,dividers = <1>, <8>;
 	};
 
+	l3init_960m_gfclk: l3init_960m_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x06c0>;
+	};
+
 	dss_32khz_clk: dss_32khz_clk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
@@ -1533,7 +1541,7 @@
 	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_clkdcoldo>;
+		clocks = <&l3init_960m_gfclk>;
 		ti,bit-shift = <8>;
 		reg = <0x13f0>;
 	};
@@ -1541,7 +1549,7 @@
 	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_clkdcoldo>;
+		clocks = <&l3init_960m_gfclk>;
 		ti,bit-shift = <8>;
 		reg = <0x1340>;
 	};
@@ -1640,7 +1648,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <28>;
+		ti,bit-shift = <24>;
 		reg = <0x1860>;
 	};
 
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
index aa5c0f6363d6..b4031fa4a567 100644
--- a/arch/arm/boot/dts/efm32gg-dk3750.dts
+++ b/arch/arm/boot/dts/efm32gg-dk3750.dts
@@ -26,7 +26,7 @@
 		};
 
 		i2c@4000a000 {
-			location = <3>;
+			efm32,location = <3>;
 			status = "ok";
 
 			temp@48 {
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
index a342ab0e6e4f..106d505c5d3d 100644
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ b/arch/arm/boot/dts/efm32gg.dtsi
@@ -84,7 +84,7 @@
 			status = "disabled";
 		};
 
-		spi2: spi@40x4000c800 { /* USART2 */
+		spi2: spi@4000c800 { /* USART2 */
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "efm32,spi";
@@ -110,7 +110,7 @@
 			status = "disabled";
 		};
 
-		uart2: uart@40x4000c800 { /* USART2 */
+		uart2: uart@4000c800 { /* USART2 */
 			compatible = "efm32,uart";
 			reg = <0x4000c800 0x400>;
 			interrupts = <18 19>;
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
new file mode 100644
index 000000000000..47b92c150f4e
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -0,0 +1,475 @@
+/*
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <0x2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpc1-3", "gpc1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	mipi0_clk: mipi0-clk {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpe2: gpe2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl0: gpl0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm0: gpm0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm1: gpm1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm2: gpm2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm3: gpm3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm4: gpm4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
+				<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
+				<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpk0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpk1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpk1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpk1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpk1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_b_io: cam-port-b-io {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_i2c0: fimc-is-i2c0 {
+		samsung,pins = "gpm4-0", "gpm4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_i2c1: fimc-is-i2c1 {
+		samsung,pins = "gpm4-2", "gpm4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_uart: fimc-is-uart {
+		samsung,pins = "gpm3-5", "gpm3-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
new file mode 100644
index 000000000000..3e678fa335bf
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -0,0 +1,444 @@
+/*
+ * Samsung's Exynos3250 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/exynos3250.h>
+
+/ {
+	compatible = "samsung,exynos3250";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		mshc0 = &mshc_0;
+		mshc1 = &mshc_1;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fixed-rate-clocks {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			xusbxti: clock@0 {
+				compatible = "fixed-clock";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xusbxti";
+			};
+
+			xxti: clock@1 {
+				compatible = "fixed-clock";
+				reg = <1>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xxti";
+			};
+
+			xtcxo: clock@2 {
+				compatible = "fixed-clock";
+				reg = <2>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xtcxo";
+			};
+		};
+
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x40000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@3f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x3f000 0x1000>;
+			};
+		};
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		sys_reg: syscon@10010000 {
+			compatible = "samsung,exynos3-sysreg", "syscon";
+			reg = <0x10010000 0x400>;
+		};
+
+		pmu_system_controller: system-controller@10020000 {
+			compatible = "samsung,exynos3250-pmu", "syscon";
+			reg = <0x10020000 0x4000>;
+		};
+
+		pd_cam: cam-power-domain@10023C00 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C00 0x20>;
+		};
+
+		pd_mfc: mfc-power-domain@10023C40 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C40 0x20>;
+		};
+
+		pd_g3d: g3d-power-domain@10023C60 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C60 0x20>;
+		};
+
+		pd_lcd0: lcd0-power-domain@10023C80 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C80 0x20>;
+		};
+
+		pd_isp: isp-power-domain@10023CA0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023CA0 0x20>;
+		};
+
+		cmu: clock-controller@10030000 {
+			compatible = "samsung,exynos3250-cmu";
+			reg = <0x10030000 0x20000>;
+			#clock-cells = <1>;
+		};
+
+		rtc: rtc@10070000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x10070000 0x100>;
+			interrupts = <0 73 0>, <0 74 0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x10481000 0x1000>,
+			      <0x10482000 0x1000>,
+			      <0x10484000 0x2000>,
+			      <0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		mct@10050000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x10050000 0x800>;
+			interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
+				     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		pinctrl_1: pinctrl@11000000 {
+			compatible = "samsung,exynos3250-pinctrl";
+			reg = <0x11000000 0x1000>;
+			interrupts = <0 225 0>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 48 0>;
+			};
+		};
+
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos3250-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <0 240 0>;
+		};
+
+		mshc_0: mshc@12510000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12510000 0x1000>;
+			interrupts = <0 142 0>;
+			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mshc_1: mshc@12520000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12520000 0x1000>;
+			interrupts = <0 143 0>;
+			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&gic>;
+			ranges;
+
+			pdma0: pdma@12680000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x12680000 0x1000>;
+				interrupts = <0 138 0>;
+				clocks = <&cmu CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@12690000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x12690000 0x1000>;
+				interrupts = <0 139 0>;
+				clocks = <&cmu CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
+		adc: adc@126C0000 {
+			compatible = "samsung,exynos-adc-v3";
+			reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+			interrupts = <0 137 0>;
+			clock-names = "adc", "sclk_tsadc";
+			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			status = "disabled";
+		};
+
+		serial_0: serial@13800000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <0 109 0>;
+			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@13810000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <0 110 0>;
+			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13860000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <0 113 0>;
+			clocks = <&cmu CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13870000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <0 114 0>;
+			clocks = <&cmu CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13880000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <0 115 0>;
+			clocks = <&cmu CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13890000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <0 116 0>;
+			clocks = <&cmu CLK_I2C3>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			status = "disabled";
+		};
+
+		i2c_4: i2c@138A0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138A0000 0x100>;
+			interrupts = <0 117 0>;
+			clocks = <&cmu CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
+
+		i2c_5: i2c@138B0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138B0000 0x100>;
+			interrupts = <0 118 0>;
+			clocks = <&cmu CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
+
+		i2c_6: i2c@138C0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138C0000 0x100>;
+			interrupts = <0 119 0>;
+			clocks = <&cmu CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
+
+		i2c_7: i2c@138D0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138D0000 0x100>;
+			interrupts = <0 120 0>;
+			clocks = <&cmu CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
+
+		spi_0: spi@13920000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13920000 0x100>;
+			interrupts = <0 121 0>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			status = "disabled";
+		};
+
+		spi_1: spi@13930000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13930000 0x100>;
+			interrupts = <0 122 0>;
+			dmas = <&pdma1 7>, <&pdma1 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			status = "disabled";
+		};
+
+		pwm: pwm@139D0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x139D0000 0x1000>;
+			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
+				     <0 107 0>, <0 108 0>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pmu {
+			compatible = "arm,cortex-a7-pmu";
+			interrupts = <0 18 0>, <0 19 0>;
+		};
+	};
+};
+
+#include "exynos3250-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 08452e183b57..b8ece4be41ca 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -19,6 +19,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/clock/exynos4.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
 #include "skeleton.dtsi"
 
 / {
@@ -44,6 +46,23 @@
 		fimc3 = &fimc_3;
 	};
 
+	clock_audss: clock-controller@03810000 {
+		compatible = "samsung,exynos4210-audss-clock";
+		reg = <0x03810000 0x0C>;
+		#clock-cells = <1>;
+	};
+
+	i2s0: i2s@03830000 {
+		compatible = "samsung,s5pv210-i2s";
+		reg = <0x03830000 0x100>;
+		clocks = <&clock_audss EXYNOS_I2S_BUS>;
+		clock-names = "iis";
+		dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
+		dma-names = "tx", "rx", "tx-sec";
+		samsung,idma-addr = <0x03000000>;
+		status = "disabled";
+	};
+
 	chipid@10000000 {
 		compatible = "samsung,exynos4210-chipid";
 		reg = <0x10000000 0x100>;
@@ -85,6 +104,11 @@
 		reg = <0x10023CE0 0x20>;
 	};
 
+	pd_gps_alive: gps-alive-power-domain@10023D00 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023D00 0x20>;
+	};
+
 	gic: interrupt-controller@10490000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
@@ -104,22 +128,39 @@
 		reg = <0x10010000 0x400>;
 	};
 
+	pmu_system_controller: system-controller@10020000 {
+		compatible = "samsung,exynos4210-pmu", "syscon";
+		reg = <0x10020000 0x4000>;
+	};
+
+	dsi_0: dsi@11C80000 {
+		compatible = "samsung,exynos4210-mipi-dsi";
+		reg = <0x11C80000 0x10000>;
+		interrupts = <0 79 0>;
+		samsung,power-domain = <&pd_lcd0>;
+		phys = <&mipi_phy 1>;
+		phy-names = "dsim";
+		clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
+		clock-names = "bus_clk", "pll_clk";
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
 	camera {
 		compatible = "samsung,fimc", "simple-bus";
 		status = "disabled";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		#clock-cells = <1>;
+		clock-output-names = "cam_a_clkout", "cam_b_clkout";
 		ranges;
 
-		clock_cam: clock-controller {
-			 #clock-cells = <1>;
-		};
-
 		fimc_0: fimc@11800000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11800000 0x1000>;
 			interrupts = <0 84 0>;
-			clocks = <&clock 256>, <&clock 128>;
+			clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
 			clock-names = "fimc", "sclk_fimc";
 			samsung,power-domain = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
@@ -130,7 +171,7 @@
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11810000 0x1000>;
 			interrupts = <0 85 0>;
-			clocks = <&clock 257>, <&clock 129>;
+			clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
 			clock-names = "fimc", "sclk_fimc";
 			samsung,power-domain = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
@@ -141,7 +182,7 @@
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11820000 0x1000>;
 			interrupts = <0 86 0>;
-			clocks = <&clock 258>, <&clock 130>;
+			clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
 			clock-names = "fimc", "sclk_fimc";
 			samsung,power-domain = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
@@ -152,7 +193,7 @@
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11830000 0x1000>;
 			interrupts = <0 87 0>;
-			clocks = <&clock 259>, <&clock 131>;
+			clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
 			clock-names = "fimc", "sclk_fimc";
 			samsung,power-domain = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
@@ -163,7 +204,7 @@
 			compatible = "samsung,exynos4210-csis";
 			reg = <0x11880000 0x4000>;
 			interrupts = <0 78 0>;
-			clocks = <&clock 260>, <&clock 134>;
+			clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <4>;
 			samsung,power-domain = <&pd_cam>;
@@ -178,7 +219,7 @@
 			compatible = "samsung,exynos4210-csis";
 			reg = <0x11890000 0x4000>;
 			interrupts = <0 80 0>;
-			clocks = <&clock 261>, <&clock 135>;
+			clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <2>;
 			samsung,power-domain = <&pd_cam>;
@@ -194,7 +235,7 @@
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 43 0>;
-		clocks = <&clock 345>;
+		clocks = <&clock CLK_WDT>;
 		clock-names = "watchdog";
 		status = "disabled";
 	};
@@ -203,7 +244,7 @@
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <0 44 0>, <0 45 0>;
-		clocks = <&clock 346>;
+		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
 		status = "disabled";
 	};
@@ -212,7 +253,7 @@
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
 		interrupts = <0 109 0>;
-		clocks = <&clock 347>;
+		clocks = <&clock CLK_KEYIF>;
 		clock-names = "keypad";
 		status = "disabled";
 	};
@@ -221,7 +262,7 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12510000 0x100>;
 		interrupts = <0 73 0>;
-		clocks = <&clock 297>, <&clock 145>;
+		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
@@ -230,7 +271,7 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12520000 0x100>;
 		interrupts = <0 74 0>;
-		clocks = <&clock 298>, <&clock 146>;
+		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
@@ -239,7 +280,7 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12530000 0x100>;
 		interrupts = <0 75 0>;
-		clocks = <&clock 299>, <&clock 147>;
+		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
@@ -248,16 +289,37 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12540000 0x100>;
 		interrupts = <0 76 0>;
-		clocks = <&clock 300>, <&clock 148>;
+		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
 
+	exynos_usbphy: exynos-usbphy@125B0000 {
+		compatible = "samsung,exynos4210-usb2-phy";
+		reg = <0x125B0000 0x100>;
+		samsung,pmureg-phandle = <&pmu_system_controller>;
+		clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
+		clock-names = "phy", "ref";
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
+	hsotg@12480000 {
+		compatible = "samsung,s3c6400-hsotg";
+		reg = <0x12480000 0x20000>;
+		interrupts = <0 71 0>;
+		clocks = <&clock CLK_USB_DEVICE>;
+		clock-names = "otg";
+		phys = <&exynos_usbphy 0>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
 	ehci@12580000 {
 		compatible = "samsung,exynos4210-ehci";
 		reg = <0x12580000 0x100>;
 		interrupts = <0 70 0>;
-		clocks = <&clock 304>;
+		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
 	};
@@ -266,17 +328,37 @@
 		compatible = "samsung,exynos4210-ohci";
 		reg = <0x12590000 0x100>;
 		interrupts = <0 70 0>;
-		clocks = <&clock 304>;
+		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
 	};
 
+	i2s1: i2s@13960000 {
+		compatible = "samsung,s5pv210-i2s";
+		reg = <0x13960000 0x100>;
+		clocks = <&clock CLK_I2S1>;
+		clock-names = "iis";
+		dmas = <&pdma1 12>, <&pdma1 11>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	i2s2: i2s@13970000 {
+		compatible = "samsung,s5pv210-i2s";
+		reg = <0x13970000 0x100>;
+		clocks = <&clock CLK_I2S2>;
+		clock-names = "iis";
+		dmas = <&pdma0 14>, <&pdma0 13>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
 	mfc: codec@13400000 {
 		compatible = "samsung,mfc-v5";
 		reg = <0x13400000 0x10000>;
 		interrupts = <0 94 0>;
 		samsung,power-domain = <&pd_mfc>;
-		clocks = <&clock 273>;
+		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
 		status = "disabled";
 	};
@@ -285,7 +367,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13800000 0x100>;
 		interrupts = <0 52 0>;
-		clocks = <&clock 312>, <&clock 151>;
+		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
@@ -294,7 +376,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13810000 0x100>;
 		interrupts = <0 53 0>;
-		clocks = <&clock 313>, <&clock 152>;
+		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
@@ -303,7 +385,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
-		clocks = <&clock 314>, <&clock 153>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
@@ -312,7 +394,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13830000 0x100>;
 		interrupts = <0 55 0>;
-		clocks = <&clock 315>, <&clock 154>;
+		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
@@ -323,7 +405,7 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13860000 0x100>;
 		interrupts = <0 58 0>;
-		clocks = <&clock 317>;
+		clocks = <&clock CLK_I2C0>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c0_bus>;
@@ -336,7 +418,7 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13870000 0x100>;
 		interrupts = <0 59 0>;
-		clocks = <&clock 318>;
+		clocks = <&clock CLK_I2C1>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c1_bus>;
@@ -349,8 +431,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13880000 0x100>;
 		interrupts = <0 60 0>;
-		clocks = <&clock 319>;
+		clocks = <&clock CLK_I2C2>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
 		status = "disabled";
 	};
 
@@ -360,8 +444,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13890000 0x100>;
 		interrupts = <0 61 0>;
-		clocks = <&clock 320>;
+		clocks = <&clock CLK_I2C3>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_bus>;
 		status = "disabled";
 	};
 
@@ -371,8 +457,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138A0000 0x100>;
 		interrupts = <0 62 0>;
-		clocks = <&clock 321>;
+		clocks = <&clock CLK_I2C4>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_bus>;
 		status = "disabled";
 	};
 
@@ -382,8 +470,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138B0000 0x100>;
 		interrupts = <0 63 0>;
-		clocks = <&clock 322>;
+		clocks = <&clock CLK_I2C5>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_bus>;
 		status = "disabled";
 	};
 
@@ -393,8 +483,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138C0000 0x100>;
 		interrupts = <0 64 0>;
-		clocks = <&clock 323>;
+		clocks = <&clock CLK_I2C6>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_bus>;
 		status = "disabled";
 	};
 
@@ -404,8 +496,10 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138D0000 0x100>;
 		interrupts = <0 65 0>;
-		clocks = <&clock 324>;
+		clocks = <&clock CLK_I2C7>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_bus>;
 		status = "disabled";
 	};
 
@@ -417,7 +511,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 327>, <&clock 159>;
+		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_bus>;
@@ -432,7 +526,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 328>, <&clock 160>;
+		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_bus>;
@@ -447,7 +541,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 329>, <&clock 161>;
+		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_bus>;
@@ -458,7 +552,7 @@
 		compatible = "samsung,exynos4210-pwm";
 		reg = <0x139D0000 0x1000>;
 		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
-		clocks = <&clock 336>;
+		clocks = <&clock CLK_PWM>;
 		clock-names = "timers";
 		#pwm-cells = <2>;
 		status = "disabled";
@@ -475,7 +569,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <0 35 0>;
-			clocks = <&clock 292>;
+			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -486,7 +580,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <0 36 0>;
-			clocks = <&clock 293>;
+			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -497,7 +591,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <0 34 0>;
-			clocks = <&clock 279>;
+			clocks = <&clock CLK_MDMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -511,7 +605,7 @@
 		reg = <0x11c00000 0x20000>;
 		interrupt-names = "fifo", "vsync", "lcd_sys";
 		interrupts = <11 0>, <11 1>, <11 2>;
-		clocks = <&clock 140>, <&clock 283>;
+		clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
 		clock-names = "sclk_fimd", "fimd";
 		samsung,power-domain = <&pd_lcd0>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 2aa13cb3bbed..f767c425d0b5 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -16,10 +16,11 @@
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Insignal Origen evaluation board based on Exynos4210";
-	compatible = "insignal,origen", "samsung,exynos4210";
+	compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
 
 	memory {
 		reg = <0x40000000 0x10000000
@@ -48,6 +49,14 @@
 		};
 	};
 
+	watchdog@10060000 {
+		status = "okay";
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
 	tmu@100C0000 {
 		status = "okay";
 	};
@@ -251,35 +260,35 @@
 		up {
 			label = "Up";
 			gpios = <&gpx2 0 1>;
-			linux,code = <103>;
+			linux,code = <KEY_UP>;
 			gpio-key,wakeup;
 		};
 
 		down {
 			label = "Down";
 			gpios = <&gpx2 1 1>;
-			linux,code = <108>;
+			linux,code = <KEY_DOWN>;
 			gpio-key,wakeup;
 		};
 
 		back {
 			label = "Back";
 			gpios = <&gpx1 7 1>;
-			linux,code = <158>;
+			linux,code = <KEY_BACK>;
 			gpio-key,wakeup;
 		};
 
 		home {
 			label = "Home";
 			gpios = <&gpx1 6 1>;
-			linux,code = <102>;
+			linux,code = <KEY_HOME>;
 			gpio-key,wakeup;
 		};
 
 		menu {
 			label = "Menu";
 			gpios = <&gpx1 5 1>;
-			linux,code = <139>;
+			linux,code = <KEY_MENU>;
 			gpio-key,wakeup;
 		};
 	};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 9c01b718d29d..636d16684750 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -19,7 +19,7 @@
 
 / {
 	model = "Samsung smdkv310 evaluation board based on Exynos4210";
-	compatible = "samsung,smdkv310", "samsung,exynos4210";
+	compatible = "samsung,smdkv310", "samsung,exynos4210", "samsung,exynos4";
 
 	memory {
 		reg = <0x40000000 0x80000000>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 63cc571ca307..f516da9e8b3a 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -17,7 +17,7 @@
 
 / {
 	model = "Samsung Trats based on Exynos4210";
-	compatible = "samsung,trats", "samsung,exynos4210";
+	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
 
 	memory {
 		reg =  <0x40000000 0x10000000
@@ -88,6 +88,12 @@
 		};
 	};
 
+	hsotg@12480000 {
+		vusb_d-supply = <&vusb_reg>;
+		vusb_a-supply = <&vusbdac_reg>;
+		status = "okay";
+	};
+
 	sdhci_emmc: sdhci@12510000 {
 		bus-width = <8>;
 		non-removable;
@@ -97,6 +103,10 @@
 		status = "okay";
 	};
 
+	exynos-usbphy@125B0000 {
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -353,6 +363,67 @@
 		};
 	};
 
+	dsi_0: dsi@11C80000 {
+		vddcore-supply = <&vusb_reg>;
+		vddio-supply = <&vmipi_reg>;
+		samsung,pll-clock-frequency = <24000000>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				dsi_out: endpoint {
+					remote-endpoint = <&dsi_in>;
+					samsung,burst-clock-frequency = <500000000>;
+					samsung,esc-clock-frequency = <20000000>;
+				};
+			};
+		};
+
+		panel@0 {
+			reg = <0>;
+			compatible = "samsung,s6e8aa0";
+			vdd3-supply = <&vcclcd_reg>;
+			vci-supply = <&vlcd_reg>;
+			reset-gpios = <&gpy4 5 0>;
+			power-on-delay= <50>;
+			reset-delay = <100>;
+			init-delay = <100>;
+			flip-horizontal;
+			flip-vertical;
+			panel-width-mm = <58>;
+			panel-height-mm = <103>;
+
+			display-timings {
+				timing-0 {
+					clock-frequency = <57153600>;
+					hactive = <720>;
+					vactive = <1280>;
+					hfront-porch = <5>;
+					hback-porch = <5>;
+					hsync-len = <5>;
+					vfront-porch = <13>;
+					vback-porch = <1>;
+					vsync-len = <2>;
+				};
+			};
+
+			port {
+				dsi_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+		};
+	};
+
+	fimd@11c00000 {
+		status = "okay";
+	};
+
 	camera {
 		pinctrl-names = "default";
 		pinctrl-0 = <>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index d2e3f5f5916d..d50eb3aa708e 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -17,7 +17,7 @@
 
 / {
 	model = "Samsung Universal C210 based on Exynos4210 rev0";
-	compatible = "samsung,universal_c210", "samsung,exynos4210";
+	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
 
 	memory {
 		reg =  <0x40000000 0x10000000
@@ -28,6 +28,21 @@
 		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
 	};
 
+	sysram@02020000 {
+		smp-sysram@0 {
+			status = "disabled";
+		};
+
+		smp-sysram@5000 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x5000 0x1000>;
+		};
+
+		smp-sysram@1f000 {
+			status = "disabled";
+		};
+	};
+
 	mct@10050000 {
 		compatible = "none";
 	};
@@ -53,6 +68,12 @@
 		enable-active-high;
 	};
 
+	hsotg@12480000 {
+		vusb_d-supply = <&ldo3_reg>;
+		vusb_a-supply = <&ldo8_reg>;
+		status = "okay";
+	};
+
 	sdhci_emmc: sdhci@12510000 {
 		bus-width = <8>;
 		non-removable;
@@ -62,6 +83,34 @@
 		status = "okay";
 	};
 
+	sdhci_sd: sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+		pinctrl-names = "default";
+		vmmc-supply = <&ldo5_reg>;
+		cd-gpios = <&gpx3 4 0>;
+		cd-inverted;
+		status = "okay";
+	};
+
+	ehci@12580000 {
+		status = "okay";
+		port@0 {
+			status = "okay";
+		};
+	};
+
+	ohci@12590000 {
+		status = "okay";
+		port@0 {
+			status = "okay";
+		};
+	};
+
+	exynos-usbphy@125B0000 {
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -201,6 +250,7 @@
 					regulator-name = "VUSB+MIPI_1.1V";
 					regulator-min-microvolt = <1100000>;
 					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
 				};
 
 				ldo4_reg: LDO4 {
@@ -231,6 +281,7 @@
 					regulator-name = "VUSB+VDAC_3.3V";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
 				};
 
 				ldo9_reg: LDO9 {
@@ -345,10 +396,97 @@
 		};
 	};
 
+	spi-lcd {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpy3 1 0>;
+		gpio-mosi = <&gpy3 3 0>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpy4 3 0>;
+
+		lcd@0 {
+			compatible = "samsung,ld9040";
+			reg = <0>;
+			vdd3-supply = <&ldo7_reg>;
+			vci-supply = <&ldo17_reg>;
+			reset-gpios = <&gpy4 5 0>;
+			spi-max-frequency = <1200000>;
+			spi-cpol;
+			spi-cpha;
+			power-on-delay = <10>;
+			reset-delay = <10>;
+			panel-width-mm = <90>;
+			panel-height-mm = <154>;
+			display-timings {
+				timing {
+					clock-frequency = <23492370>;
+					hactive = <480>;
+					vactive = <800>;
+					hback-porch = <16>;
+					hfront-porch = <16>;
+					vback-porch = <2>;
+					vfront-porch = <28>;
+					hsync-len = <2>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <0>;
+					pixelclk-active = <0>;
+				};
+			};
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_dpi_ep>;
+				};
+			};
+		};
+	};
+
+	fimd: fimd@11c00000 {
+		pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+		pinctrl-names = "default";
+		status = "okay";
+		samsung,invert-vden;
+		samsung,invert-vclk;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@3 {
+			reg = <3>;
+			fimd_dpi_ep: endpoint {
+				remote-endpoint = <&lcd_ep>;
+			};
+		};
+	};
+
 	pwm@139D0000 {
 		compatible = "samsung,s5p6440-pwm";
 		status = "okay";
 	};
+
+	camera {
+		status = "okay";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <>;
+
+		fimc_0: fimc@11800000 {
+			status = "okay";
+		};
+
+		fimc_1: fimc@11810000 {
+			status = "okay";
+		};
+
+		fimc_2: fimc@11820000 {
+			status = "okay";
+		};
+
+		fimc_3: fimc@11830000 {
+			status = "okay";
+		};
+	};
 };
 
 &mdma1 {
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 48ecd7a755ab..ee3001f38821 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -23,7 +23,7 @@
 #include "exynos4210-pinctrl.dtsi"
 
 / {
-	compatible = "samsung,exynos4210";
+	compatible = "samsung,exynos4210", "samsung,exynos4";
 
 	aliases {
 		pinctrl0 = &pinctrl_0;
@@ -31,6 +31,24 @@
 		pinctrl2 = &pinctrl_2;
 	};
 
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x20000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@1f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x1f000 0x1000>;
+		};
+	};
+
 	pd_lcd1: lcd1-power-domain@10023CA0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CA0 0x20>;
@@ -53,7 +71,7 @@
 		reg = <0x10050000 0x800>;
 		interrupt-parent = <&mct_map>;
 		interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
-		clocks = <&clock 3>, <&clock 344>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
@@ -109,7 +127,7 @@
 		interrupt-parent = <&combiner>;
 		reg = <0x100C0000 0x100>;
 		interrupts = <2 4>;
-		clocks = <&clock 383>;
+		clocks = <&clock CLK_TMU_APBIF>;
 		clock-names = "tmu_apbif";
 		status = "disabled";
 	};
@@ -118,13 +136,14 @@
 		compatible = "samsung,s5pv210-g2d";
 		reg = <0x12800000 0x1000>;
 		interrupts = <0 89 0>;
-		clocks = <&clock 177>, <&clock 277>;
+		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};
 
 	camera {
-		clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
 		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
 
 		fimc_0: fimc@11800000 {
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index 94a43f9a05e2..3c00e6ec9302 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -20,18 +20,13 @@
 #include "exynos4x12.dtsi"
 
 / {
-	compatible = "samsung,exynos4212";
+	compatible = "samsung,exynos4212", "samsung,exynos4";
 
-	gic: interrupt-controller@10490000 {
-		cpu-offset = <0x8000>;
+	combiner: interrupt-controller@10440000 {
+		samsung,combiner-nr = <18>;
 	};
 
-	interrupt-controller@10440000 {
-		samsung,combiner-nr = <18>;
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-			     <0 107 0>, <0 108 0>;
+	gic: interrupt-controller@10490000 {
+		cpu-offset = <0x8000>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 9804fcb71f8c..31db28a4bb33 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -16,7 +16,7 @@
 
 / {
 	model = "Hardkernel ODROID-X board based on Exynos4412";
-	compatible = "hardkernel,odroid-x", "samsung,exynos4412";
+	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
 
 	memory {
 		reg = <0x40000000 0x40000000>;
@@ -251,7 +251,7 @@
 				buck2_reg: BUCK2 {
 					regulator-name = "vdd_arm";
 					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1300000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 6bc053924e9e..e925c9fbfb07 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -14,10 +14,11 @@
 
 /dts-v1/;
 #include "exynos4412.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Insignal Origen evaluation board based on Exynos4412";
-	compatible = "insignal,origen4412", "samsung,exynos4412";
+	compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
 
 	memory {
 		reg = <0x40000000 0x40000000>;
@@ -48,6 +49,14 @@
 		};
 	};
 
+	watchdog@10060000 {
+		status = "okay";
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
 	pinctrl@11000000 {
 		keypad_rows: keypad-rows {
 			samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
@@ -76,37 +85,37 @@
 		key_home {
 			keypad,row = <0>;
 			keypad,column = <0>;
-			linux,code = <102>;
+			linux,code = <KEY_HOME>;
 		};
 
 		key_down {
 			keypad,row = <0>;
 			keypad,column = <1>;
-			linux,code = <108>;
+			linux,code = <KEY_DOWN>;
 		};
 
 		key_up {
 			keypad,row = <1>;
 			keypad,column = <0>;
-			linux,code = <103>;
+			linux,code = <KEY_UP>;
 		};
 
 		key_menu {
 			keypad,row = <1>;
 			keypad,column = <1>;
-			linux,code = <139>;
+			linux,code = <KEY_MENU>;
 		};
 
 		key_back {
 			keypad,row = <2>;
 			keypad,column = <0>;
-			linux,code = <158>;
+			linux,code = <KEY_BACK>;
 		};
 
 		key_enter {
 			keypad,row = <2>;
 			keypad,column = <1>;
-			linux,code = <28>;
+			linux,code = <KEY_ENTER>;
 		};
 	};
 
@@ -459,8 +468,8 @@
 
 				buck2_reg: BUCK2 {
 					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <925000>;
-					regulator-max-microvolt	= <1300000>;
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt	= <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 					op_mode = <1>; /* Normal Mode */
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index ad316a1ee9e0..ded0b70f7644 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -17,7 +17,7 @@
 
 / {
 	model = "Samsung SMDK evaluation board based on Exynos4412";
-	compatible = "samsung,smdk4412", "samsung,exynos4412";
+	compatible = "samsung,smdk4412", "samsung,exynos4412", "samsung,exynos4";
 
 	memory {
 		reg = <0x40000000 0x40000000>;
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index 0a9831256b33..ea6929d9c621 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -16,7 +16,7 @@
 
 / {
 	model = "FriendlyARM TINY4412 board based on Exynos4412";
-	compatible = "friendlyarm,tiny4412", "samsung,exynos4412";
+	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
 
 	memory {
 		reg = <0x40000000 0x40000000>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 4f851ccf40eb..77878447b312 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -17,10 +17,11 @@
 
 / {
 	model = "Samsung Trats 2 based on Exynos4412";
-	compatible = "samsung,trats2", "samsung,exynos4412";
+	compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
 
 	aliases {
-		i2c8 = &i2c_ak8975;
+		i2c9 = &i2c_ak8975;
+		i2c10 = &i2c_cm36651;
 	};
 
 	memory {
@@ -71,39 +72,81 @@
 			enable-active-high;
 		};
 
-		/* More to come */
+		lcd_vdd3_reg: voltage-regulator-2 {
+			compatible = "regulator-fixed";
+			regulator-name = "LCD_VDD_2.2V";
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			gpio = <&gpc0 1 0>;
+			enable-active-high;
+		};
+
+		cam_af_reg: voltage-regulator-3 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_AF";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpm0 4 0>;
+			enable-active-high;
+		};
+
+		cam_isp_core_reg: voltage-regulator-4 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_ISP_CORE_1.2V_EN";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&gpm0 3 0>;
+			enable-active-high;
+			regulator-always-on;
+		};
+
+		ps_als_reg: voltage-regulator-5 {
+			compatible = "regulator-fixed";
+			regulator-name = "LED_A_3.0V";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpj0 5 0>;
+			enable-active-high;
+		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
 		key-down {
-			interrupt-parent = <&gpj1>;
-			interrupts = <2 0>;
-			gpios = <&gpj1 2 1>;
+			gpios = <&gpx3 3 1>;
 			linux,code = <114>;
 			label = "volume down";
 			debounce-interval = <10>;
 		};
 
 		key-up {
-			interrupt-parent = <&gpj1>;
-			interrupts = <1 0>;
-			gpios = <&gpj1 1 1>;
+			gpios = <&gpx2 2 1>;
 			linux,code = <115>;
 			label = "volume up";
 			debounce-interval = <10>;
 		};
 
 		key-power {
-			interrupt-parent = <&gpx2>;
-			interrupts = <7 0>;
 			gpios = <&gpx2 7 1>;
 			linux,code = <116>;
 			label = "power";
 			debounce-interval = <10>;
 			gpio-key,wakeup;
 		};
+
+		key-ok {
+			gpios = <&gpx0 1 1>;
+			linux,code = <139>;
+			label = "ok";
+			debounce-inteval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	adc: adc@126C0000 {
+		vdd-supply = <&ldo3_reg>;
+		status = "okay";
 	};
 
 	i2c@13890000 {
@@ -126,6 +169,38 @@
 		};
 	};
 
+	i2c_0: i2c@13860000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <400000>;
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		s5c73m3@3c {
+			compatible = "samsung,s5c73m3";
+			reg = <0x3c>;
+			standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
+			xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
+			vdd-int-supply = <&buck9_reg>;
+			vddio-cis-supply = <&ldo9_reg>;
+			vdda-supply = <&ldo17_reg>;
+			vddio-host-supply = <&ldo18_reg>;
+			vdd-af-supply = <&cam_af_reg>;
+			vdd-reg-supply = <&cam_io_reg>;
+			clock-frequency = <24000000>;
+			/* CAM_A_CLKOUT */
+			clocks = <&camera 0>;
+			clock-names = "cis_extclk";
+			port {
+				s5c73m3_ep: endpoint {
+					remote-endpoint = <&csis0_ep>;
+					data-lanes = <1 2 3 4>;
+				};
+			};
+		};
+	};
+
 	i2c@138D0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;
@@ -489,12 +564,28 @@
 		status = "okay";
 
 		ak8975@0c {
-			compatible = "ak,ak8975";
+			compatible = "asahi-kasei,ak8975";
 			reg = <0x0c>;
 			gpios = <&gpj0 7 0>;
 		};
 	};
 
+	i2c_cm36651: i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		gpios = <&gpf0 0 1>, <&gpf0 1 1>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cm36651@18 {
+			compatible = "capella,cm36651";
+			reg = <0x18>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <2 2>;
+			vled-supply = <&ps_als_reg>;
+		};
+	};
+
 	spi_1: spi@13930000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_bus>;
@@ -511,8 +602,69 @@
 		};
 	};
 
-	camera {
-		pinctrl-0 = <&cam_port_b_clk_active>;
+	dsi_0: dsi@11C80000 {
+		vddcore-supply = <&ldo8_reg>;
+		vddio-supply = <&ldo10_reg>;
+		samsung,pll-clock-frequency = <24000000>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				dsi_out: endpoint {
+					remote-endpoint = <&dsi_in>;
+					samsung,burst-clock-frequency = <500000000>;
+					samsung,esc-clock-frequency = <20000000>;
+				};
+			};
+		};
+
+		panel@0 {
+			compatible = "samsung,s6e8aa0";
+			reg = <0>;
+			vdd3-supply = <&lcd_vdd3_reg>;
+			vci-supply = <&ldo25_reg>;
+			reset-gpios = <&gpy4 5 0>;
+			power-on-delay= <50>;
+			reset-delay = <100>;
+			init-delay = <100>;
+			flip-horizontal;
+			flip-vertical;
+			panel-width-mm = <58>;
+			panel-height-mm = <103>;
+
+			display-timings {
+				timing-0 {
+					clock-frequency = <0>;
+					hactive = <720>;
+					vactive = <1280>;
+					hfront-porch = <5>;
+					hback-porch = <5>;
+					hsync-len = <5>;
+					vfront-porch = <13>;
+					vback-porch = <1>;
+					vsync-len = <2>;
+				};
+			};
+
+			port {
+				dsi_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+		};
+	};
+
+	fimd@11c00000 {
+		status = "okay";
+	};
+
+	camera: camera {
+		pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 		pinctrl-names = "default";
 		status = "okay";
 
@@ -532,6 +684,23 @@
 			status = "okay";
 		};
 
+		csis_0: csis@11880000 {
+			status = "okay";
+			vddcore-supply = <&ldo8_reg>;
+			vddio-supply = <&ldo10_reg>;
+			clock-frequency = <176000000>;
+
+			/* Camera C (3) MIPI CSI-2 (CSIS0) */
+			port@3 {
+				reg = <3>;
+				csis0_ep: endpoint {
+					remote-endpoint = <&s5c73m3_ep>;
+					data-lanes = <1 2 3 4>;
+					samsung,csis-hs-settle = <12>;
+				};
+			};
+		};
+
 		csis_1: csis@11890000 {
 			vddcore-supply = <&ldo8_reg>;
 			vddio-supply = <&ldo10_reg>;
@@ -572,10 +741,11 @@
 					reg = <0x10>;
 					svdda-supply = <&cam_io_reg>;
 					svddio-supply = <&ldo19_reg>;
+					afvdd-supply = <&ldo19_reg>;
 					clock-frequency = <24000000>;
 					/* CAM_B_CLKOUT */
-					clocks = <&clock_cam 1>;
-					clock-names = "mclk";
+					clocks = <&camera 1>;
+					clock-names = "extclk";
 					samsung,camclk-out = <1>;
 					gpios = <&gpm1 6 0>;
 
@@ -589,4 +759,30 @@
 			};
 		};
 	};
+
+	exynos-usbphy@125B0000 {
+		status = "okay";
+	};
+
+	hsotg@12480000 {
+		vusb_d-supply = <&ldo15_reg>;
+		vusb_a-supply = <&ldo12_reg>;
+		status = "okay";
+	};
+
+	thermistor-ap@0 {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
+		pullup-ohm = <100000>;	 /* 100K */
+		pulldown-ohm = <100000>; /* 100K */
+		io-channels = <&adc 1>;  /* AP temperature */
+	};
+
+	thermistor-battery@1 {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
+		pullup-ohm = <100000>;	 /* 100K */
+		pulldown-ohm = <100000>; /* 100K */
+		io-channels = <&adc 2>;  /* Battery temperature */
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 87b339c739de..c42a3e196cd5 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -20,19 +20,17 @@
 #include "exynos4x12.dtsi"
 
 / {
-	compatible = "samsung,exynos4412";
+	compatible = "samsung,exynos4412", "samsung,exynos4";
+
+	combiner: interrupt-controller@10440000 {
+		samsung,combiner-nr = <20>;
+	};
 
 	gic: interrupt-controller@10490000 {
 		cpu-offset = <0x4000>;
 	};
 
-	interrupt-controller@10440000 {
-		samsung,combiner-nr = <20>;
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-			     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+	pmu_system_controller: system-controller@10020000 {
+		compatible = "samsung,exynos4412-pmu", "syscon";
 	};
-
 };
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 5c412aa14738..c5a943df1cd7 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -31,6 +31,30 @@
 		mshc0 = &mshc_0;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
+	};
+
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x40000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@2f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x2f000 0x1000>;
+		};
+	};
+
 	pd_isp: isp-power-domain@10023CA0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CA0 0x20>;
@@ -47,7 +71,7 @@
 		reg = <0x10050000 0x800>;
 		interrupt-parent = <&mct_map>;
 		interrupts = <0>, <1>, <2>, <3>, <4>;
-		clocks = <&clock 3>, <&clock 344>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
@@ -62,6 +86,14 @@
 		};
 	};
 
+	combiner: interrupt-controller@10440000 {
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+			     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+	};
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x11400000 0x1000>;
@@ -80,6 +112,18 @@
 		};
 	};
 
+	adc: adc@126C0000 {
+		compatible = "samsung,exynos-adc-v1";
+		reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 3>;
+		clocks = <&clock CLK_TSADC>;
+		clock-names = "adc";
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		status = "disabled";
+	};
+
 	pinctrl_2: pinctrl@03860000 {
 		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x03860000 0x1000>;
@@ -93,17 +137,22 @@
 		interrupts = <0 72 0>;
 	};
 
+	pmu_system_controller: system-controller@10020000 {
+		compatible = "samsung,exynos4212-pmu", "syscon";
+	};
+
 	g2d@10800000 {
 		compatible = "samsung,exynos4212-g2d";
 		reg = <0x10800000 0x1000>;
 		interrupts = <0 89 0>;
-		clocks = <&clock 177>, <&clock 277>;
+		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};
 
 	camera {
-		clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
 		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
 
 		fimc_0: fimc@11800000 {
@@ -145,7 +194,7 @@
 			reg = <0x12390000 0x1000>;
 			interrupts = <0 105 0>;
 			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock 353>;
+			clocks = <&clock CLK_FIMC_LITE0>;
 			clock-names = "flite";
 			status = "disabled";
 		};
@@ -155,7 +204,7 @@
 			reg = <0x123A0000 0x1000>;
 			interrupts = <0 106 0>;
 			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock 354>;
+			clocks = <&clock CLK_FIMC_LITE1>;
 			clock-names = "flite";
 			status = "disabled";
 		};
@@ -165,12 +214,19 @@
 			reg = <0x12000000 0x260000>;
 			interrupts = <0 90 0>, <0 95 0>;
 			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock 353>, <&clock 354>, <&clock 355>,
-				<&clock 356>, <&clock 17>, <&clock 357>,
-				<&clock 358>, <&clock 359>, <&clock 360>,
-				<&clock 450>,<&clock 451>, <&clock 452>,
-				<&clock 453>, <&clock 176>, <&clock 13>,
-				<&clock 454>, <&clock 395>, <&clock 455>;
+			clocks = <&clock CLK_FIMC_LITE0>,
+				 <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
+				 <&clock CLK_PPMUISPMX>,
+				 <&clock CLK_MOUT_MPLL_USER_T>,
+				 <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
+				 <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
+				 <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
+				 <&clock CLK_DIV_MCUISP0>,
+				 <&clock CLK_DIV_MCUISP1>,
+				 <&clock CLK_SCLK_UART_ISP>,
+				 <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
+				 <&clock CLK_ACLK400_MCUISP>,
+				 <&clock CLK_DIV_ACLK400_MCUISP>;
 			clock-names = "lite0", "lite1", "ppmuispx",
 				      "ppmuispmx", "mpll", "isp",
 				      "drc", "fd", "mcuisp",
@@ -190,7 +246,7 @@
 			i2c1_isp: i2c-isp@12140000 {
 				compatible = "samsung,exynos4212-i2c-isp";
 				reg = <0x12140000 0x100>;
-				clocks = <&clock 370>;
+				clocks = <&clock CLK_I2C1_ISP>;
 				clock-names = "i2c_isp";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -205,8 +261,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		fifo-depth = <0x80>;
-		clocks = <&clock 301>, <&clock 149>;
+		clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
 		clock-names = "biu", "ciu";
 		status = "disabled";
 	};
+
+	exynos-usbphy@125B0000 {
+		compatible = "samsung,exynos4x12-usb2-phy";
+		samsung,sysreg-phandle = <&sys_reg>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 258dca441f36..79d0608d6dcc 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -81,13 +81,6 @@
 		status = "disabled";
 	};
 
-	watchdog {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		status = "disabled";
-	};
-
 	fimd@14400000 {
 		compatible = "samsung,exynos5250-fimd";
 		interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index b42e658876e5..d0de1f50d15b 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -12,10 +12,11 @@
 /dts-v1/;
 #include "exynos5250.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Insignal Arndale evaluation board based on EXYNOS5250";
-	compatible = "insignal,arndale", "samsung,exynos5250";
+	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
 
 	memory {
 		reg = <0x40000000 0x80000000>;
@@ -25,6 +26,10 @@
 		bootargs = "console=ttySAC2,115200";
 	};
 
+	rtc@101E0000 {
+		status = "okay";
+	};
+
 	codec@11000000 {
 		samsung,mfc-r = <0x43000000 0x800000>;
 		samsung,mfc-l = <0x51000000 0x800000>;
@@ -103,6 +108,7 @@
 					regulator-name = "VDD_IOPERI_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
 					op_mode = <1>;
 				};
 
@@ -287,6 +293,7 @@
 					regulator-name = "vdd_g3d";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
 					regulator-boot-on;
 					op_mode = <1>;
 				};
@@ -370,6 +377,27 @@
 		};
 	};
 
+	i2c@121D0000 {
+		status = "okay";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <40000>;
+		samsung,i2c-slave-addr = <0x38>;
+
+		sata_phy_i2c:sata-phy@38 {
+			compatible = "samsung,exynos-sataphy-i2c";
+			reg = <0x38>;
+		};
+	};
+
+	sata@122F0000 {
+		status = "okay";
+	};
+
+	sata-phy@12170000 {
+		status = "okay";
+		samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+	};
+
 	mmc_0: mmc@12200000 {
 		status = "okay";
 		num-slots = <1>;
@@ -418,42 +446,42 @@
 		menu {
 			label = "SW-TACT2";
 			gpios = <&gpx1 4 1>;
-			linux,code = <139>;
+			linux,code = <KEY_MENU>;
 			gpio-key,wakeup;
 		};
 
 		home {
 			label = "SW-TACT3";
 			gpios = <&gpx1 5 1>;
-			linux,code = <102>;
+			linux,code = <KEY_HOME>;
 			gpio-key,wakeup;
 		};
 
 		up {
 			label = "SW-TACT4";
 			gpios = <&gpx1 6 1>;
-			linux,code = <103>;
+			linux,code = <KEY_UP>;
 			gpio-key,wakeup;
 		};
 
 		down {
 			label = "SW-TACT5";
 			gpios = <&gpx1 7 1>;
-			linux,code = <108>;
+			linux,code = <KEY_DOWN>;
 			gpio-key,wakeup;
 		};
 
 		back {
 			label = "SW-TACT6";
 			gpios = <&gpx2 0 1>;
-			linux,code = <158>;
+			linux,code = <KEY_BACK>;
 			gpio-key,wakeup;
 		};
 
 		wakeup {
 			label = "SW-TACT7";
 			gpios = <&gpx2 1 1>;
-			linux,code = <143>;
+			linux,code = <KEY_WAKEUP>;
 			gpio-key,wakeup;
 		};
 	};
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 2c1560d52f1a..89ac90f59e2e 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -240,7 +240,7 @@
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <378000>;
 
-		hdmiphy@38 {
+		hdmiphy: hdmiphy@38 {
 			compatible = "samsung,exynos4212-hdmiphy";
 			reg = <0x38>;
 		};
@@ -304,6 +304,10 @@
 
 	hdmi {
 		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_irq>;
+		phy = <&hdmiphy>;
+		ddc = <&i2c_2>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 9a49e6804ae1..886cfca044ac 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -351,6 +351,34 @@
 			samsung,pin-drv = <0>;
 		};
 
+		pwm0_out: pwm0-out {
+			samsung,pins = "gpb2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm1_out: pwm1-out {
+			samsung,pins = "gpb2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm2_out: pwm2-out {
+			samsung,pins = "gpb2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm3_out: pwm3-out {
+			samsung,pins = "gpb2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
 		i2c7_bus: i2c7-bus {
 			samsung,pins = "gpb2-2", "gpb2-3";
 			samsung,pin-function = <3>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 3e69837c435c..a794a705d404 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
-	compatible = "samsung,smdk5250", "samsung,exynos5250";
+	compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
 
 	aliases {
 	};
@@ -27,6 +27,10 @@
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
+	rtc@101E0000 {
+		status = "okay";
+	};
+
 	i2c@12C60000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <20000>;
@@ -36,6 +40,148 @@
 			compatible = "samsung,s524ad0xd1";
 			reg = <0x50>;
 		};
+
+		max77686@09 {
+			compatible = "maxim,max77686";
+			reg = <0x09>;
+
+			voltage-regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "P1.0V_LDO_OUT1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "P1.2V_LDO_OUT2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "P1.8V_LDO_OUT3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "P2.8V_LDO_OUT4";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "P1.8V_LDO_OUT5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "P1.1V_LDO_OUT6";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "P1.1V_LDO_OUT7";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "P1.0V_LDO_OUT8";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "P1.8V_LDO_OUT10";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "P1.8V_LDO_OUT11";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "P3.0V_LDO_OUT12";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "P1.8V_LDO_OUT13";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "P1.8V_LDO_OUT14";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "P1.0V_LDO_OUT15";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "P1.8V_LDO_OUT16";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "P1.8V_BUCK_OUT5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
 	};
 
 	vdd: fixed-regulator@0 {
@@ -96,16 +242,12 @@
 		samsung,i2c-slave-addr = <0x38>;
 		status = "okay";
 
-		sata-phy {
-			compatible = "samsung,sata-phy";
+		sata_phy_i2c:sata-phy@38 {
+			compatible = "samsung,exynos-sataphy-i2c";
 			reg = <0x38>;
 		};
 	};
 
-	sata@122F0000 {
-		samsung,sata-freq = <66>;
-	};
-
 	i2c@12C80000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
@@ -128,6 +270,15 @@
 		};
 	};
 
+	sata@122F0000 {
+		status = "okay";
+	};
+
+	sata-phy@12170000 {
+		status = "okay";
+		samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+	};
+
 	mmc@12200000 {
 		status = "okay";
 		num-slots = <1>;
@@ -164,10 +315,6 @@
 		};
 	};
 
-	spi_0: spi@12d20000 {
-		status = "disabled";
-	};
-
 	spi_1: spi@12d30000 {
 		status = "okay";
 
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 7e45eea2d78f..079fdf9e3f18 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -14,13 +14,24 @@
 
 / {
 	model = "Google Snow";
-	compatible = "google,snow", "samsung,exynos5250";
+	compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
 
 	aliases {
 		i2c104 = &i2c_104;
 	};
 
+	rtc@101E0000 {
+		status = "okay";
+	};
+
 	pinctrl@11400000 {
+		ec_irq: ec-irq {
+			samsung,pins = "gpx1-6";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
 		sd3_clk: sd3-clk {
 			samsung,pin-drv = <0>;
 		};
@@ -33,6 +44,50 @@
 		sd3_bus4: sd3-bus-width4 {
 			samsung,pin-drv = <0>;
 		};
+
+		max98095_en: max98095-en {
+			samsung,pins = "gpx1-7";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		tps65090_irq: tps65090-irq {
+			samsung,pins = "gpx2-6";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		usb3_vbus_en: usb3-vbus-en {
+			samsung,pins = "gpx2-7";
+			samsung,pin-function = <1>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		hdmi_hpd_irq: hdmi-hpd-irq {
+			samsung,pins = "gpx3-7";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@13400000 {
+		arb_their_claim: arb-their-claim {
+			samsung,pins = "gpe0-4";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		arb_our_claim: arb-our-claim {
+			samsung,pins = "gpf0-3";
+			samsung,pin-function = <1>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	gpio-keys {
@@ -48,6 +103,12 @@
 		};
 	};
 
+	vbat: vbat-fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+	};
+
 	i2c-arbitrator {
 		compatible = "i2c-arb-gpio-challenge";
 		#address-cells = <1>;
@@ -61,6 +122,9 @@
 		wait-retry-us = <3000>;
 		wait-free-us = <50000>;
 
+		pinctrl-names = "default";
+		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
+
 		/* Use ID 104 as a hint that we're on physical bus 4 */
 		i2c_104: i2c@0 {
 			reg = <0>;
@@ -78,6 +142,8 @@
 				reg = <0x1e>;
 				interrupts = <6 0>;
 				interrupt-parent = <&gpx1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&ec_irq>;
 				wakeup-source;
 
 				keyboard-controller {
@@ -169,6 +235,83 @@
 							0x070c0069>;	/* LEFT */
 				};
 			};
+
+			power-regulator {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&vbat>;
+				infet3-supply = <&vbat>;
+				infet4-supply = <&vbat>;
+				infet5-supply = <&vbat>;
+				infet6-supply = <&vbat>;
+				infet7-supply = <&vbat>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					dcdc1 {
+						ti,enable-ext-control;
+					};
+					dcdc2 {
+						ti,enable-ext-control;
+					};
+					dcdc3 {
+						ti,enable-ext-control;
+					};
+					fet1 {
+						regulator-name = "vcd_led";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet4 {
+						regulator-name = "sdcard";
+						ti,overcurrent-wait = <3>;
+					};
+					fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet6 {
+						regulator-name = "lcd_vdd";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					ldo1 {
+					};
+					ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
 		};
 	};
 
@@ -192,6 +335,41 @@
 		};
 	};
 
+	i2c@12CD0000 {
+		max98095: codec@11 {
+			compatible = "maxim,max98095";
+			reg = <0x11>;
+			pinctrl-0 = <&max98095_en>;
+			pinctrl-names = "default";
+		};
+	};
+
+	i2s0: i2s@03830000 {
+		status = "okay";
+	};
+
+	sound {
+		compatible = "google,snow-audio-max98095";
+
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98095>;
+	};
+
+	usb3_vbus_reg: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpx2 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_en>;
+		enable-active-high;
+	};
+
+	phy@12100000 {
+		vbus-supply = <&usb3_vbus_reg>;
+	};
+
 	usb@12110000 {
 		samsung,vbus-gpio = <&gpx1 1 0>;
 	};
@@ -202,4 +380,54 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	hdmi {
+		hdmi-en-supply = <&tps65090_fet7>;
+		vdd-supply = <&ldo8_reg>;
+		vdd_osc-supply = <&ldo10_reg>;
+		vdd_pll-supply = <&ldo8_reg>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	fimd@14400000 {
+		status = "okay";
+		samsung,invert-vclk;
+	};
+
+	dp-controller@145B0000 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_hpd>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,link-rate = <0x0a>;
+		samsung,lane-count = <2>;
+		samsung,hpd-gpio = <&gpx0 7 0>;
+
+		display-timings {
+			native-mode = <&timing1>;
+
+			timing1: timing@1 {
+				clock-frequency = <70589280>;
+				hactive = <1366>;
+				vactive = <768>;
+				hfront-porch = <40>;
+				hback-porch = <40>;
+				hsync-len = <32>;
+				vback-porch = <10>;
+				vfront-porch = <12>;
+				vsync-len = <6>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index b7dec41e32af..834fb5a5306f 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -17,13 +17,14 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/clock/exynos5250.h>
 #include "exynos5.dtsi"
 #include "exynos5250-pinctrl.dtsi"
 
-#include <dt-bindings/clk/exynos-audss-clk.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
 
 / {
-	compatible = "samsung,exynos5250";
+	compatible = "samsung,exynos5250", "samsung,exynos5";
 
 	aliases {
 		spi0 = &spi_0;
@@ -46,6 +47,7 @@
 		i2c6 = &i2c_6;
 		i2c7 = &i2c_7;
 		i2c8 = &i2c_8;
+		i2c9 = &i2c_9;
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
@@ -70,6 +72,24 @@
 		};
 	};
 
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x30000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x30000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@2f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x2f000 0x1000>;
+		};
+	};
+
 	pd_gsc: gsc-power-domain@10044000 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044000 0x20>;
@@ -90,7 +110,8 @@
 		compatible = "samsung,exynos5250-audss-clock";
 		reg = <0x03810000 0x0C>;
 		#clock-cells = <1>;
-		clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+			 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
 		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
 	};
 
@@ -115,7 +136,7 @@
 		interrupt-parent = <&mct_map>;
 		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
 			     <4 0>, <5 0>;
-		clocks = <&clock 1>, <&clock 335>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
@@ -167,16 +188,30 @@
 		interrupts = <0 47 0>;
 	};
 
-	watchdog {
-		clocks = <&clock 336>;
+	pmu_system_controller: system-controller@10040000 {
+		compatible = "samsung,exynos5250-pmu", "syscon";
+		reg = <0x10040000 0x5000>;
+	};
+
+	sysreg_system_controller: syscon@10050000 {
+		compatible = "samsung,exynos5-sysreg", "syscon";
+		reg = <0x10050000 0x5000>;
+	};
+
+	watchdog@101D0000 {
+		compatible = "samsung,exynos5250-wdt";
+		reg = <0x101D0000 0x100>;
+		interrupts = <0 42 0>;
+		clocks = <&clock CLK_WDT>;
 		clock-names = "watchdog";
+		samsung,syscon-phandle = <&pmu_system_controller>;
 	};
 
 	g2d@10850000 {
 		compatible = "samsung,exynos5250-g2d";
 		reg = <0x10850000 0x1000>;
 		interrupts = <0 91 0>;
-		clocks = <&clock 345>;
+		clocks = <&clock CLK_G2D>;
 		clock-names = "fimg2d";
 	};
 
@@ -185,55 +220,64 @@
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
 		samsung,power-domain = <&pd_mfc>;
-		clocks = <&clock 266>;
+		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
 	};
 
 	rtc@101E0000 {
-		clocks = <&clock 337>;
+		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
-		status = "okay";
+		status = "disabled";
 	};
 
 	tmu@10060000 {
 		compatible = "samsung,exynos5250-tmu";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 65 0>;
-		clocks = <&clock 338>;
+		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
 	};
 
 	serial@12C00000 {
-		clocks = <&clock 289>, <&clock 146>;
+		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C10000 {
-		clocks = <&clock 290>, <&clock 147>;
+		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C20000 {
-		clocks = <&clock 291>, <&clock 148>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C30000 {
-		clocks = <&clock 292>, <&clock 149>;
+		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	sata@122F0000 {
-		compatible = "samsung,exynos5-sata-ahci";
+		compatible = "snps,dwc-ahci";
+		samsung,sata-freq = <66>;
 		reg = <0x122F0000 0x1ff>;
 		interrupts = <0 115 0>;
-		clocks = <&clock 277>, <&clock 143>;
+		clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
 		clock-names = "sata", "sclk_sata";
+		phys = <&sata_phy>;
+		phy-names = "sata-phy";
+		status = "disabled";
 	};
 
-	sata-phy@12170000 {
-		compatible = "samsung,exynos5-sata-phy";
+	sata_phy: sata-phy@12170000 {
+		compatible = "samsung,exynos5250-sata-phy";
 		reg = <0x12170000 0x1ff>;
+		clocks = <&clock CLK_SATA_PHYCTRL>;
+		clock-names = "sata_phyctrl";
+		#phy-cells = <0>;
+		samsung,syscon-phandle = <&pmu_system_controller>;
+		status = "disabled";
 	};
 
 	i2c_0: i2c@12C60000 {
@@ -242,7 +286,7 @@
 		interrupts = <0 56 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 294>;
+		clocks = <&clock CLK_I2C0>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c0_bus>;
@@ -255,7 +299,7 @@
 		interrupts = <0 57 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 295>;
+		clocks = <&clock CLK_I2C1>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c1_bus>;
@@ -268,7 +312,7 @@
 		interrupts = <0 58 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 296>;
+		clocks = <&clock CLK_I2C2>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c2_bus>;
@@ -281,7 +325,7 @@
 		interrupts = <0 59 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 297>;
+		clocks = <&clock CLK_I2C3>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c3_bus>;
@@ -294,7 +338,7 @@
 		interrupts = <0 60 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 298>;
+		clocks = <&clock CLK_I2C4>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c4_bus>;
@@ -307,7 +351,7 @@
 		interrupts = <0 61 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 299>;
+		clocks = <&clock CLK_I2C5>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_bus>;
@@ -320,7 +364,7 @@
 		interrupts = <0 62 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 300>;
+		clocks = <&clock CLK_I2C6>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c6_bus>;
@@ -333,7 +377,7 @@
 		interrupts = <0 63 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 301>;
+		clocks = <&clock CLK_I2C7>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c7_bus>;
@@ -346,17 +390,17 @@
 		interrupts = <0 64 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 302>;
+		clocks = <&clock CLK_I2C_HDMI>;
 		clock-names = "i2c";
 		status = "disabled";
 	};
 
-	i2c@121D0000 {
+	i2c_9: i2c@121D0000 {
                 compatible = "samsung,exynos5-sata-phy-i2c";
                 reg = <0x121D0000 0x100>;
                 #address-cells = <1>;
                 #size-cells = <0>;
-		clocks = <&clock 288>;
+		clocks = <&clock CLK_SATA_PHYI2C>;
 		clock-names = "i2c";
 		status = "disabled";
 	};
@@ -371,7 +415,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 304>, <&clock 154>;
+		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_bus>;
@@ -387,7 +431,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 305>, <&clock 155>;
+		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_bus>;
@@ -403,7 +447,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 306>, <&clock 156>;
+		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_bus>;
@@ -415,7 +459,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x12200000 0x1000>;
-		clocks = <&clock 280>, <&clock 139>;
+		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x80>;
 		status = "disabled";
@@ -427,7 +471,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x12210000 0x1000>;
-		clocks = <&clock 281>, <&clock 140>;
+		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x80>;
 		status = "disabled";
@@ -439,7 +483,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x12220000 0x1000>;
-		clocks = <&clock 282>, <&clock 141>;
+		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x80>;
 		status = "disabled";
@@ -451,7 +495,7 @@
 		interrupts = <0 78 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 283>, <&clock 142>;
+		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x80>;
 		status = "disabled";
@@ -481,7 +525,7 @@
 		dmas = <&pdma1 12
 			&pdma1 11>;
 		dma-names = "tx", "rx";
-		clocks = <&clock 307>, <&clock 157>;
+		clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
 		clock-names = "iis", "i2s_opclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s1_bus>;
@@ -494,7 +538,7 @@
 		dmas = <&pdma0 12
 			&pdma0 11>;
 		dma-names = "tx", "rx";
-		clocks = <&clock 308>, <&clock 158>;
+		clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
 		clock-names = "iis", "i2s_opclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2_bus>;
@@ -502,7 +546,7 @@
 
 	usb@12000000 {
 		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock 286>;
+		clocks = <&clock CLK_USB3>;
 		clock-names = "usbdrd30";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -512,22 +556,18 @@
 			compatible = "synopsys,dwc3";
 			reg = <0x12000000 0x10000>;
 			interrupts = <0 72 0>;
-			usb-phy = <&usb2_phy &usb3_phy>;
+			phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+			phy-names = "usb2-phy", "usb3-phy";
 		};
 	};
 
-	usb3_phy: usbphy@12100000 {
-		compatible = "samsung,exynos5250-usb3phy";
+	usbdrd_phy: phy@12100000 {
+		compatible = "samsung,exynos5250-usbdrd-phy";
 		reg = <0x12100000 0x100>;
-		clocks = <&clock 1>, <&clock 286>;
-		clock-names = "ext_xtal", "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usbphy-sys {
-			reg = <0x10040704 0x8>;
-		};
+		clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
+		clock-names = "phy", "ref";
+		samsung,pmu-syscon = <&pmu_system_controller>;
+		#phy-cells = <1>;
 	};
 
 	usb@12110000 {
@@ -535,8 +575,14 @@
 		reg = <0x12110000 0x100>;
 		interrupts = <0 71 0>;
 
-		clocks = <&clock 285>;
+		clocks = <&clock CLK_USB2>;
 		clock-names = "usbhost";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			phys = <&usb2_phy_gen 1>;
+		};
 	};
 
 	usb@12120000 {
@@ -544,14 +590,20 @@
 		reg = <0x12120000 0x100>;
 		interrupts = <0 71 0>;
 
-		clocks = <&clock 285>;
+		clocks = <&clock CLK_USB2>;
 		clock-names = "usbhost";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			phys = <&usb2_phy_gen 1>;
+		};
 	};
 
 	usb2_phy: usbphy@12130000 {
 		compatible = "samsung,exynos5250-usb2phy";
 		reg = <0x12130000 0x100>;
-		clocks = <&clock 1>, <&clock 285>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>;
 		clock-names = "ext_xtal", "usbhost";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -563,12 +615,22 @@
 		};
 	};
 
+	usb2_phy_gen: phy@12130000 {
+		compatible = "samsung,exynos5250-usb2-phy";
+		reg = <0x12130000 0x100>;
+		clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
+		clock-names = "phy", "ref";
+		#phy-cells = <1>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		samsung,pmureg-phandle = <&pmu_system_controller>;
+	};
+
 	pwm: pwm@12dd0000 {
 		compatible = "samsung,exynos4210-pwm";
 		reg = <0x12dd0000 0x100>;
 		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 		#pwm-cells = <3>;
-		clocks = <&clock 311>;
+		clocks = <&clock CLK_PWM>;
 		clock-names = "timers";
 	};
 
@@ -583,7 +645,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121A0000 0x1000>;
 			interrupts = <0 34 0>;
-			clocks = <&clock 275>;
+			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -594,7 +656,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121B0000 0x1000>;
 			interrupts = <0 35 0>;
-			clocks = <&clock 276>;
+			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -605,7 +667,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
-			clocks = <&clock 346>;
+			clocks = <&clock CLK_MDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -616,7 +678,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <0 124 0>;
-			clocks = <&clock 271>;
+			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -629,7 +691,7 @@
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
 		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock 256>;
+		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
 	};
 
@@ -638,7 +700,7 @@
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
 		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock 257>;
+		clocks = <&clock CLK_GSCL1>;
 		clock-names = "gscl";
 	};
 
@@ -647,7 +709,7 @@
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
 		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock 258>;
+		clocks = <&clock CLK_GSCL2>;
 		clock-names = "gscl";
 	};
 
@@ -656,7 +718,7 @@
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
 		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock 259>;
+		clocks = <&clock CLK_GSCL3>;
 		clock-names = "gscl";
 	};
 
@@ -664,17 +726,19 @@
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
-		clocks = <&clock 344>, <&clock 136>, <&clock 137>,
-				<&clock 159>, <&clock 1024>;
+		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+			 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+			 <&clock CLK_MOUT_HDMI>;
 		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
 				"sclk_hdmiphy", "mout_hdmi";
+		samsung,syscon-phandle = <&pmu_system_controller>;
 	};
 
 	mixer {
 		compatible = "samsung,exynos5250-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
-		clocks = <&clock 343>, <&clock 136>;
+		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
 		clock-names = "mixer", "sclk_hdmi";
 	};
 
@@ -685,14 +749,14 @@
 	};
 
 	dp-controller@145B0000 {
-		clocks = <&clock 342>;
+		clocks = <&clock CLK_DP>;
 		clock-names = "dp";
 		phys = <&dp_phy>;
 		phy-names = "dp";
 	};
 
 	fimd@14400000 {
-		clocks = <&clock 133>, <&clock 339>;
+		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
 	};
 
@@ -700,10 +764,18 @@
 		compatible = "samsung,exynos-adc-v1";
 		reg = <0x12D10000 0x100>, <0x10040718 0x4>;
 		interrupts = <0 106 0>;
-		clocks = <&clock 303>;
+		clocks = <&clock CLK_ADC>;
 		clock-names = "adc";
 		#io-channel-cells = <1>;
 		io-channel-ranges;
 		status = "disabled";
 	};
+
+	sss@10830000 {
+		compatible = "samsung,exynos4210-secss";
+		reg = <0x10830000 0x10000>;
+		interrupts = <0 112 0>;
+		clocks = <&clock CLK_SSS>;
+		clock-names = "secss";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
new file mode 100644
index 000000000000..f6ee55ea0708
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -0,0 +1,574 @@
+/*
+ * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define PIN_PULL_NONE	0
+#define PIN_PULL_DOWN	1
+#define PIN_PULL_UP	3
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb3_vbus0_en: usb3-vbus0-en {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+				"gpb0-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+				"gpb0-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	spdif1_bus: spdif1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_hs_bus: i2c0-hs-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_hs_bus: i2c1-hs-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_hs_bus: i2c2-hs-bus {
+		samsung,pins = "gpb3-4", "gpb3-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_hs_bus: i2c3-hs-bus {
+		samsung,pins = "gpb3-6", "gpb3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb4-0", "gpb4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb4-2", "gpb4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpb4-4", "gpb4-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpb4-6", "gpb4-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c8_bus: i2c8-bus {
+		samsung,pins = "gpb5-0", "gpb5-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c9_bus: i2c9-bus {
+		samsung,pins = "gpb5-2", "gpb5-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c10_bus: i2c10-bus {
+		samsung,pins = "gpb5-4", "gpb5-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c11_bus: i2c11-bus {
+		samsung,pins = "gpb5-6", "gpb5-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_gpio_a: cam-gpio-a {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+			"gpe1-0", "gpe1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_gpio_b: cam-gpio-b {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c1_bus: cam-i2c1-bus {
+		samsung,pins = "gpf0-2", "gpf0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c0_bus: cam-i2c0-bus {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi0_bus: cam-spi0-bus {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi1_bus: cam-spi1-bus {
+		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpc0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpc1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpc1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+};
+
+&pinctrl_2 {
+	gpz0: gpz0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz1: gpz1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
new file mode 100644
index 000000000000..8c84ab27c19b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -0,0 +1,103 @@
+/*
+ * SAMSUNG XYREF5260 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5260.dtsi"
+
+/ {
+	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
+	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	xrtcxti: xrtcxti {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xrtcxti";
+		#clock-cells = <0>;
+	};
+};
+
+&pinctrl_0 {
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	bypass-smu;
+	supports-highspeed;
+	supports-hs200-mode; /* 200 Mhz */
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		disable-wp;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
new file mode 100644
index 000000000000..5398a60207ca
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -0,0 +1,304 @@
+/*
+ * SAMSUNG EXYNOS5260 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/clock/exynos5260-clk.h>
+
+/ {
+	compatible = "samsung,exynos5260", "samsung,exynos5";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			cci-control-port = <&cci_control0>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clock_top: clock-controller@10010000 {
+			compatible = "samsung,exynos5260-clock-top";
+			reg = <0x10010000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_peri: clock-controller@10200000 {
+			compatible = "samsung,exynos5260-clock-peri";
+			reg = <0x10200000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_egl: clock-controller@10600000 {
+			compatible = "samsung,exynos5260-clock-egl";
+			reg = <0x10600000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_kfc: clock-controller@10700000 {
+			compatible = "samsung,exynos5260-clock-kfc";
+			reg = <0x10700000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_g2d: clock-controller@10A00000 {
+			compatible = "samsung,exynos5260-clock-g2d";
+			reg = <0x10A00000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_mif: clock-controller@10CE0000 {
+			compatible = "samsung,exynos5260-clock-mif";
+			reg = <0x10CE0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_mfc: clock-controller@11090000 {
+			compatible = "samsung,exynos5260-clock-mfc";
+			reg = <0x11090000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_g3d: clock-controller@11830000 {
+			compatible = "samsung,exynos5260-clock-g3d";
+			reg = <0x11830000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_fsys: clock-controller@122E0000 {
+			compatible = "samsung,exynos5260-clock-fsys";
+			reg = <0x122E0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_aud: clock-controller@128C0000 {
+			compatible = "samsung,exynos5260-clock-aud";
+			reg = <0x128C0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_isp: clock-controller@133C0000 {
+			compatible = "samsung,exynos5260-clock-isp";
+			reg = <0x133C0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_gscl: clock-controller@13F00000 {
+			compatible = "samsung,exynos5260-clock-gscl";
+			reg = <0x13F00000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_disp: clock-controller@14550000 {
+			compatible = "samsung,exynos5260-clock-disp";
+			reg = <0x14550000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-controller;
+			reg = <0x10481000 0x1000>,
+				<0x10482000 0x1000>,
+				<0x10484000 0x2000>,
+				<0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		chipid: chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		mct: mct@100B0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x100B0000 0x1000>;
+			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
+					<0 107 0>, <0 122 0>, <0 123 0>,
+					<0 124 0>, <0 125 0>, <0 126 0>,
+					<0 127 0>, <0 128 0>, <0 129 0>;
+		};
+
+		cci: cci@10F00000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10F00000 0x1000>;
+			ranges = <0x0 0x10F00000 0x6000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+		};
+
+		pinctrl_0: pinctrl@11600000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x11600000 0x1000>;
+			interrupts = <0 79 0>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 32 0>;
+			};
+		};
+
+		pinctrl_1: pinctrl@12290000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x12290000 0x1000>;
+			interrupts = <0 157 0>;
+		};
+
+		pinctrl_2: pinctrl@128B0000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x128B0000 0x1000>;
+			interrupts = <0 243 0>;
+		};
+
+		uart0: serial@12C00000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C00000 0x100>;
+			interrupts = <0 146 0>;
+			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart1: serial@12C10000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C10000 0x100>;
+			interrupts = <0 147 0>;
+			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart2: serial@12C20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C20000 0x100>;
+			interrupts = <0 148 0>;
+			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart3: serial@12860000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12860000 0x100>;
+			interrupts = <0 145 0>;
+			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		mmc_0: mmc@12140000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12140000 0x2000>;
+			interrupts = <0 156 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@12150000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12150000 0x2000>;
+			interrupts = <0 158 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@12160000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12160000 0x2000>;
+			interrupts = <0 159 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+	};
+};
+
+#include "exynos5260-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
new file mode 100644
index 000000000000..7275bbd6fc4b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -0,0 +1,82 @@
+/*
+ * SAMSUNG SMDK5410 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+/ {
+	model = "Samsung SMDK5410 board based on EXYNOS5410";
+	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	firmware@02037000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02037000 0x1000>;
+	};
+
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		disable-wp;
+	};
+};
+
+&uart0 {
+		status = "okay";
+};
+
+&uart1 {
+		status = "okay";
+};
+
+&uart2 {
+		status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
new file mode 100644
index 000000000000..3839c26f467f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -0,0 +1,206 @@
+/*
+ * SAMSUNG EXYNOS5410 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file.
+ * EXYNOS5410 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/exynos5410.h>
+
+/ {
+	compatible = "samsung,exynos5410", "samsung,exynos5";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		combiner: interrupt-controller@10440000 {
+			compatible = "samsung,exynos4210-combiner";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			samsung,combiner-nr = <32>;
+			reg = <0x10440000 0x1000>;
+			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg =	<0x10481000 0x1000>,
+				<0x10482000 0x1000>,
+				<0x10484000 0x2000>,
+				<0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		mct: mct@101C0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101C0000 0xB00>;
+			interrupt-parent = <&interrupt_map>;
+			interrupts = <0>, <1>, <2>, <3>,
+				<4>, <5>, <6>, <7>,
+				<8>, <9>, <10>, <11>;
+			clocks = <&fin_pll>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+
+			interrupt_map: interrupt-map {
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0 &combiner 23 3>,
+						<1 &combiner 23 4>,
+						<2 &combiner 25 2>,
+						<3 &combiner 25 3>,
+						<4 &gic 0 120 0>,
+						<5 &gic 0 121 0>,
+						<6 &gic 0 122 0>,
+						<7 &gic 0 123 0>,
+						<8 &gic 0 128 0>,
+						<9 &gic 0 129 0>,
+						<10 &gic 0 130 0>,
+						<11 &gic 0 131 0>;
+			};
+		};
+
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x54000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x54000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@53000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x53000 0x1000>;
+			};
+		};
+
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5410-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
+		};
+
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12200000 0x1000>;
+			interrupts = <0 75 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12210000 0x1000>;
+			interrupts = <0 76 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12220000 0x1000>;
+			interrupts = <0 77 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		uart0: serial@12C00000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C00000 0x100>;
+			interrupts = <0 51 0>;
+			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart1: serial@12C10000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C10000 0x100>;
+			interrupts = <0 52 0>;
+			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart2: serial@12C20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C20000 0x100>;
+			interrupts = <0 53 0>;
+			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 7340745ff979..434fd9d3e09d 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -11,10 +11,12 @@
 
 /dts-v1/;
 #include "exynos5420.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
-	compatible = "insignal,arndale-octa", "samsung,exynos5420";
+	compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
 
 	memory {
 		reg = <0x20000000 0x80000000>;
@@ -24,6 +26,11 @@
 		bootargs = "console=ttySAC3,115200";
 	};
 
+	firmware@02073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
 	fixed-rate-clocks {
 		oscclk {
 			compatible = "samsung,exynos5420-oscclk";
@@ -31,6 +38,15 @@
 		};
 	};
 
+	rtc@101E0000 {
+		status = "okay";
+	};
+
+	codec@11000000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+	};
+
 	mmc@12200000 {
 		status = "okay";
 		broken-cd;
@@ -41,6 +57,7 @@
 		samsung,dw-mshc-ddr-timing = <0 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+		vmmc-supply = <&ldo10_reg>;
 
 		slot@0 {
 			reg = <0>;
@@ -57,10 +74,304 @@
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		vmmc-supply = <&ldo10_reg>;
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <4>;
 		};
 	};
+
+	hsi2c_4: i2c@12CA0000 {
+		status = "okay";
+
+		s2mps11_pmic@66 {
+			compatible = "samsung,s2mps11-pmic";
+			reg = <0x66>;
+			s2mps11,buck2-ramp-delay = <12>;
+			s2mps11,buck34-ramp-delay = <12>;
+			s2mps11,buck16-ramp-delay = <12>;
+			s2mps11,buck6-ramp-enable = <1>;
+			s2mps11,buck2-ramp-enable = <1>;
+			s2mps11,buck3-ramp-enable = <1>;
+			s2mps11,buck4-ramp-enable = <1>;
+
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+			s2mps11_osc: clocks {
+				#clock-cells = <1>;
+				clock-output-names = "s2mps11_ap",
+						"s2mps11_cp", "s2mps11_bt";
+			};
+
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "PVDD_ALIVE_1V0";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "PVDD_APIO_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "PVDD_APIO_MMCON_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "PVDD_ADC_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "PVDD_PLL_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "PVDD_ANAIP_1V0";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "PVDD_ANAIP_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "PVDD_ABB_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "PVDD_USB_3V3";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "PVDD_PRE_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "PVDD_USB_1V0";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "PVDD_HSIC_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "PVDD_APIO_MMCOFF_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "PVDD_PERI_2V8";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "PVDD_PERI_3V3";
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+				};
+
+				ldo18_reg: LDO18 {
+					regulator-name = "PVDD_EMMC_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo19_reg: LDO19 {
+					regulator-name = "PVDD_TFLASH_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo20_reg: LDO20 {
+					regulator-name = "PVDD_BTWIFI_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo21_reg: LDO21 {
+					regulator-name = "PVDD_CAM1IO_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo23_reg: LDO23 {
+					regulator-name = "PVDD_MIFS_1V1";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo24_reg: LDO24 {
+					regulator-name = "PVDD_CAM1_AVDD_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo26_reg: LDO26 {
+					regulator-name = "PVDD_CAM0_AF_2V8";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				ldo27_reg: LDO27 {
+					regulator-name = "PVDD_G3DS_1V0";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo28_reg: LDO28 {
+					regulator-name = "PVDD_TSP_3V3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo29_reg: LDO29 {
+					regulator-name = "PVDD_AUDIO_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo31_reg: LDO31 {
+					regulator-name = "PVDD_PERI_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo32_reg: LDO32 {
+					regulator-name = "PVDD_LCD_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo33_reg: LDO33 {
+					regulator-name = "PVDD_CAM0IO_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo35_reg: LDO35 {
+					regulator-name = "PVDD_CAM0_DVDD_1V2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo38_reg: LDO38 {
+					regulator-name = "PVDD_CAM0_AVDD_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "PVDD_MIF_1V1";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "PVDD_INT_1V0";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "PVDD_G3D_1V0";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "PVDD_LPDDR3_1V2";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "PVDD_KFC_1V0";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "VIN_LLDO_1V4";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "VIN_MLDO_2V0";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "VIN_HLDO_3V5";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3500000>;
+					regulator-always-on;
+				};
+
+				buck10_reg: BUCK10 {
+					regulator-name = "PVDD_EMMCF_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "SW-TACT1";
+			gpios = <&gpx2 7 1>;
+			linux,code = <KEY_WAKEUP>;
+			gpio-key,wakeup;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
new file mode 100644
index 000000000000..1c5b8f9f4a36
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -0,0 +1,287 @@
+/*
+ * Google Peach Pit Rev 6+ board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5420.dtsi"
+
+/ {
+	model = "Google Peach Pit Rev 6+";
+
+	compatible = "google,pit-rev16",
+		"google,pit-rev15", "google,pit-rev14",
+		"google,pit-rev13", "google,pit-rev12",
+		"google,pit-rev11", "google,pit-rev10",
+		"google,pit-rev9", "google,pit-rev8",
+		"google,pit-rev7", "google,pit-rev6",
+		"google,pit", "google,peach","samsung,exynos5420",
+		"samsung,exynos5";
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	sound {
+		compatible = "google,snow-audio-max98090";
+
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98090>;
+	};
+
+	usb300_vbus_reg: regulator-usb300 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb300_vbus_en>;
+		enable-active-high;
+	};
+
+	usb301_vbus_reg: regulator-usb301 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 1 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb301_vbus_en>;
+		enable-active-high;
+	};
+};
+
+&pinctrl_0 {
+	max98090_irq: max98090-irq {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	tpm_irq: tpm-irq {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	dp_hpd_gpio: dp_hpd_gpio {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_3 {
+	usb300_vbus_en: usb300-vbus-en {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb301_vbus_en: usb301-vbus-en {
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&uart_3 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	caps2-mmc-hs200-1_8v;
+	supports-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&hsi2c_7 {
+	status = "okay";
+
+	max98090: codec@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98090_irq>;
+	};
+};
+
+&hsi2c_9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+
+		/* Unused irq; but still need to configure the pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpm_irq>;
+	};
+};
+
+&i2c_2	{
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+};
+
+&usbdrd_phy0 {
+	vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd_phy1 {
+	vbus-supply = <&usb301_vbus_reg>;
+};
+
+/*
+ * Use longest HW watchdog in SoC (32 seconds) since the hardware
+ * watchdog provides no debugging information (compared to soft/hard
+ * lockup detectors) and so should be last resort.
+ */
+&watchdog {
+	timeout-sec = <32>;
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd_gpio>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x06>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx2 6 0>;
+
+	display-timings {
+		native-mode = <&timing1>;
+
+		timing1: timing@1 {
+			clock-frequency = <70589280>;
+			hactive = <1366>;
+			vactive = <768>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			hsync-len = <32>;
+			vback-porch = <10>;
+			vfront-porch = <12>;
+			vsync-len = <6>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index e62c8eb57438..ba686e40eac7 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -624,6 +624,34 @@
 			samsung,pin-drv = <0>;
 		};
 
+		pwm0_out: pwm0-out {
+			samsung,pins = "gpb2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm1_out: pwm1-out {
+			samsung,pins = "gpb2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm2_out: pwm2-out {
+			samsung,pins = "gpb2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm3_out: pwm3-out {
+			samsung,pins = "gpb2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
 		i2c7_hs_bus: i2c7-hs-bus {
 			samsung,pins = "gpb2-2", "gpb2-3";
 			samsung,pin-function = <3>;
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index fb5a1e25c632..6052aa9c5659 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "Samsung SMDK5420 board based on EXYNOS5420";
-	compatible = "samsung,smdk5420", "samsung,exynos5420";
+	compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
 
 	memory {
 		reg = <0x20000000 0x80000000>;
@@ -31,6 +31,48 @@
 		};
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd: fixed-regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd-supply";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		dbvdd: fixed-regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "dbvdd-supply";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		spkvdd: fixed-regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "spkvdd-supply";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+
+	rtc@101E0000 {
+		status = "okay";
+	};
+
+	codec@11000000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+	};
+
 	mmc@12200000 {
 		status = "okay";
 		broken-cd;
@@ -103,6 +145,22 @@
 		};
 	};
 
+	pinctrl@14000000 {
+		usb300_vbus_en: usb300-vbus-en {
+			samsung,pins = "gpg0-5";
+			samsung,pin-function = <1>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		usb301_vbus_en: usb301-vbus-en {
+			samsung,pins = "gpg1-4";
+			samsung,pin-function = <1>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
 	hdmi@14530000 {
 		status = "okay";
 		hpd-gpio = <&gpx3 7 0>;
@@ -110,6 +168,36 @@
 		pinctrl-0 = <&hdmi_hpd_irq>;
 	};
 
+	usb300_vbus_reg: regulator-usb300 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpg0 5 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb300_vbus_en>;
+		enable-active-high;
+	};
+
+	usb301_vbus_reg: regulator-usb301 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpg1 4 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb301_vbus_en>;
+		enable-active-high;
+	};
+
+	phy@12100000 {
+		vbus-supply = <&usb300_vbus_reg>;
+	};
+
+	phy@12500000 {
+		vbus-supply = <&usb301_vbus_reg>;
+	};
+
 	i2c_2: i2c@12C80000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
@@ -120,4 +208,220 @@
 			reg = <0x50>;
 		};
 	};
+
+	hsi2c_4: i2c@12CA0000 {
+		status = "okay";
+
+		s2mps11_pmic@66 {
+			compatible = "samsung,s2mps11-pmic";
+			reg = <0x66>;
+			s2mps11,buck2-ramp-delay = <12>;
+			s2mps11,buck34-ramp-delay = <12>;
+			s2mps11,buck16-ramp-delay = <12>;
+			s2mps11,buck6-ramp-enable = <1>;
+			s2mps11,buck2-ramp-enable = <1>;
+			s2mps11,buck3-ramp-enable = <1>;
+			s2mps11,buck4-ramp-enable = <1>;
+
+			s2mps11_osc: clocks {
+				#clock-cells = <1>;
+				clock-output-names = "s2mps11_ap",
+						"s2mps11_cp", "s2mps11_bt";
+			};
+
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "vdd_ldo1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "vdd_ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "vdd_ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "vdd_ldo6";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "vdd_ldo7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "vdd_ldo8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "vdd_ldo9";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "vdd_ldo10";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "vdd_ldo11";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "vdd_ldo12";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "vdd_ldo13";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "vdd_ldo15";
+					regulator-min-microvolt = <3100000>;
+					regulator-max-microvolt = <3100000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "vdd_ldo16";
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					regulator-always-on;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "tsp_avdd";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo19_reg: LDO19 {
+					regulator-name = "vdd_sd";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo24_reg: LDO24 {
+					regulator-name = "tsp_io";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "vdd_mem";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "vdd_kfc";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "vdd_1.0v_ldo";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "vdd_1.8v_ldo";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "vdd_2.8v_ldo";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3750000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck10_reg: BUCK10 {
+					regulator-name = "vdd_vmem";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 8db792b26f79..e38532271ef9 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -13,13 +13,14 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/clock/exynos5420.h>
 #include "exynos5.dtsi"
 #include "exynos5420-pinctrl.dtsi"
 
-#include <dt-bindings/clk/exynos-audss-clk.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
 
 / {
-	compatible = "samsung,exynos5420";
+	compatible = "samsung,exynos5420", "samsung,exynos5";
 
 	aliases {
 		mshc0 = &mmc_0;
@@ -46,6 +47,8 @@
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		spi2 = &spi_2;
+		usbdrdphy0 = &usbdrd_phy0;
+		usbdrdphy1 = &usbdrd_phy1;
 	};
 
 	cpus {
@@ -57,6 +60,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu1: cpu@1 {
@@ -64,6 +68,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu2: cpu@2 {
@@ -71,6 +76,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0x2>;
 			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu3: cpu@3 {
@@ -78,6 +84,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0x3>;
 			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu4: cpu@100 {
@@ -85,6 +92,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
 			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
 		};
 
 		cpu5: cpu@101 {
@@ -92,6 +100,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
 			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
 		};
 
 		cpu6: cpu@102 {
@@ -99,6 +108,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
 			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
 		};
 
 		cpu7: cpu@103 {
@@ -106,6 +116,44 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x103>;
 			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+		};
+	};
+
+	cci@10d20000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x10d20000 0x1000>;
+		ranges = <0x0 0x10d20000 0x6000>;
+
+		cci_control0: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+		cci_control1: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+	};
+
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x54000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x54000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@53000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x53000 0x1000>;
 		};
 	};
 
@@ -119,16 +167,18 @@
 		compatible = "samsung,exynos5420-audss-clock";
 		reg = <0x03810000 0x0C>;
 		#clock-cells = <1>;
-		clocks = <&clock 1>, <&clock 5>, <&clock 148>, <&clock 149>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+			 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
 		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
 	};
 
-	codec@11000000 {
+	mfc: codec@11000000 {
 		compatible = "samsung,mfc-v7";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
-		clocks = <&clock 401>;
+		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
+		samsung,power-domain = <&mfc_pd>;
 	};
 
 	mmc_0: mmc@12200000 {
@@ -137,7 +187,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x12200000 0x2000>;
-		clocks = <&clock 351>, <&clock 132>;
+		clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x40>;
 		status = "disabled";
@@ -149,7 +199,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x12210000 0x2000>;
-		clocks = <&clock 352>, <&clock 133>;
+		clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x40>;
 		status = "disabled";
@@ -161,13 +211,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x12220000 0x1000>;
-		clocks = <&clock 353>, <&clock 134>;
+		clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x40>;
 		status = "disabled";
 	};
 
-	mct@101C0000 {
+	mct: mct@101C0000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x101C0000 0x800>;
 		interrupt-controller;
@@ -175,7 +225,7 @@
 		interrupt-parent = <&mct_map>;
 		interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
 				<8>, <9>, <10>, <11>;
-		clocks = <&clock 1>, <&clock 315>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
@@ -217,16 +267,6 @@
 		reg = <0x100440C0 0x20>;
 	};
 
-	mau_pd: power-domain@100440E0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x100440E0 0x20>;
-	};
-
-	g2d_pd: power-domain@10044100 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044100 0x20>;
-	};
-
 	msc_pd: power-domain@10044120 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044120 0x20>;
@@ -268,10 +308,10 @@
 		interrupts = <0 47 0>;
 	};
 
-	rtc@101E0000 {
-		clocks = <&clock 317>;
+	rtc: rtc@101E0000 {
+		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
-		status = "okay";
+		status = "disabled";
 	};
 
 	amba {
@@ -281,11 +321,22 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
+		adma: adma@03880000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x03880000 0x1000>;
+			interrupts = <0 110 0>;
+			clocks = <&clock_audss EXYNOS_ADMA>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <6>;
+			#dma-requests = <16>;
+		};
+
 		pdma0: pdma@121A0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121A0000 0x1000>;
 			interrupts = <0 34 0>;
-			clocks = <&clock 362>;
+			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -296,7 +347,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121B0000 0x1000>;
 			interrupts = <0 35 0>;
-			clocks = <&clock 363>;
+			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -307,7 +358,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
-			clocks = <&clock 473>;
+			clocks = <&clock CLK_MDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -318,18 +369,68 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <0 124 0>;
-			clocks = <&clock 442>;
+			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;
+			/*
+			 * MDMA1 can support both secure and non-secure
+			 * AXI transactions. When this is enabled in the kernel
+			 * for boards that run in secure mode, we are getting
+			 * imprecise external aborts causing the kernel to oops.
+			 */
+			status = "disabled";
 		};
 	};
 
+	i2s0: i2s@03830000 {
+		compatible = "samsung,exynos5420-i2s";
+		reg = <0x03830000 0x100>;
+		dmas = <&adma 0
+			&adma 2
+			&adma 1>;
+		dma-names = "tx", "rx", "tx-sec";
+		clocks = <&clock_audss EXYNOS_I2S_BUS>,
+			<&clock_audss EXYNOS_I2S_BUS>,
+			<&clock_audss EXYNOS_SCLK_I2S>;
+		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+		samsung,idma-addr = <0x03000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
+		status = "disabled";
+	};
+
+	i2s1: i2s@12D60000 {
+		compatible = "samsung,exynos5420-i2s";
+		reg = <0x12D60000 0x100>;
+		dmas = <&pdma1 12
+			&pdma1 11>;
+		dma-names = "tx", "rx";
+		clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
+		clock-names = "iis", "i2s_opclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_bus>;
+		status = "disabled";
+	};
+
+	i2s2: i2s@12D70000 {
+		compatible = "samsung,exynos5420-i2s";
+		reg = <0x12D70000 0x100>;
+		dmas = <&pdma0 12
+			&pdma0 11>;
+		dma-names = "tx", "rx";
+		clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
+		clock-names = "iis", "i2s_opclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2_bus>;
+		status = "disabled";
+	};
+
 	spi_0: spi@12d20000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d20000 0x100>;
-		interrupts = <0 66 0>;
+		interrupts = <0 68 0>;
 		dmas = <&pdma0 5
 			&pdma0 4>;
 		dma-names = "tx", "rx";
@@ -337,7 +438,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_bus>;
-		clocks = <&clock 271>, <&clock 135>;
+		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
 		clock-names = "spi", "spi_busclk0";
 		status = "disabled";
 	};
@@ -345,7 +446,7 @@
 	spi_1: spi@12d30000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d30000 0x100>;
-		interrupts = <0 67 0>;
+		interrupts = <0 69 0>;
 		dmas = <&pdma1 5
 			&pdma1 4>;
 		dma-names = "tx", "rx";
@@ -353,7 +454,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_bus>;
-		clocks = <&clock 272>, <&clock 136>;
+		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
 		clock-names = "spi", "spi_busclk0";
 		status = "disabled";
 	};
@@ -361,7 +462,7 @@
 	spi_2: spi@12d40000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d40000 0x100>;
-		interrupts = <0 68 0>;
+		interrupts = <0 70 0>;
 		dmas = <&pdma0 7
 			&pdma0 6>;
 		dma-names = "tx", "rx";
@@ -369,28 +470,28 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_bus>;
-		clocks = <&clock 273>, <&clock 137>;
+		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
 		clock-names = "spi", "spi_busclk0";
 		status = "disabled";
 	};
 
-	serial@12C00000 {
-		clocks = <&clock 257>, <&clock 128>;
+	uart_0: serial@12C00000 {
+		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	serial@12C10000 {
-		clocks = <&clock 258>, <&clock 129>;
+	uart_1: serial@12C10000 {
+		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	serial@12C20000 {
-		clocks = <&clock 259>, <&clock 130>;
+	uart_2: serial@12C20000 {
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	serial@12C30000 {
-		clocks = <&clock 260>, <&clock 131>;
+	uart_3: serial@12C30000 {
+		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
@@ -399,7 +500,7 @@
 		reg = <0x12dd0000 0x100>;
 		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 		#pwm-cells = <3>;
-		clocks = <&clock 279>;
+		clocks = <&clock CLK_PWM>;
 		clock-names = "timers";
 	};
 
@@ -409,16 +510,16 @@
 		#phy-cells = <0>;
 	};
 
-	dp-controller@145B0000 {
-		clocks = <&clock 412>;
+	dp: dp-controller@145B0000 {
+		clocks = <&clock CLK_DP1>;
 		clock-names = "dp";
 		phys = <&dp_phy>;
 		phy-names = "dp";
 	};
 
-	fimd@14400000 {
+	fimd: fimd@14400000 {
 		samsung,power-domain = <&disp_pd>;
-		clocks = <&clock 147>, <&clock 421>;
+		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
 	};
 
@@ -426,7 +527,7 @@
 		compatible = "samsung,exynos-adc-v2";
 		reg = <0x12D10000 0x100>, <0x10040720 0x4>;
 		interrupts = <0 106 0>;
-		clocks = <&clock 270>;
+		clocks = <&clock CLK_TSADC>;
 		clock-names = "adc";
 		#io-channel-cells = <1>;
 		io-channel-ranges;
@@ -439,7 +540,7 @@
 		interrupts = <0 56 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 261>;
+		clocks = <&clock CLK_I2C0>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c0_bus>;
@@ -452,7 +553,7 @@
 		interrupts = <0 57 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 262>;
+		clocks = <&clock CLK_I2C1>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c1_bus>;
@@ -465,7 +566,7 @@
 		interrupts = <0 58 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 263>;
+		clocks = <&clock CLK_I2C2>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c2_bus>;
@@ -478,7 +579,7 @@
 		interrupts = <0 59 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 264>;
+		clocks = <&clock CLK_I2C3>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c3_bus>;
@@ -493,7 +594,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c4_hs_bus>;
-		clocks = <&clock 265>;
+		clocks = <&clock CLK_USI0>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -506,7 +607,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_hs_bus>;
-		clocks = <&clock 266>;
+		clocks = <&clock CLK_USI1>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -519,7 +620,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c6_hs_bus>;
-		clocks = <&clock 267>;
+		clocks = <&clock CLK_USI2>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -532,7 +633,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c7_hs_bus>;
-		clocks = <&clock 268>;
+		clocks = <&clock CLK_USI3>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -545,7 +646,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c8_hs_bus>;
-		clocks = <&clock 281>;
+		clocks = <&clock CLK_USI4>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -558,7 +659,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c9_hs_bus>;
-		clocks = <&clock 282>;
+		clocks = <&clock CLK_USI5>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -571,27 +672,34 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c10_hs_bus>;
-		clocks = <&clock 283>;
+		clocks = <&clock CLK_USI6>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
 
-	hdmi@14530000 {
-		compatible = "samsung,exynos4212-hdmi";
+	hdmi: hdmi@14530000 {
+		compatible = "samsung,exynos5420-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
-		clocks = <&clock 413>, <&clock 143>, <&clock 768>,
-			<&clock 158>, <&clock 640>;
+		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+			 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+			 <&clock CLK_MOUT_HDMI>;
 		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
 			"sclk_hdmiphy", "mout_hdmi";
+		phy = <&hdmiphy>;
+		samsung,syscon-phandle = <&pmu_system_controller>;
 		status = "disabled";
 	};
 
-	mixer@14450000 {
+	hdmiphy: hdmiphy@145D0000 {
+		reg = <0x145D0000 0x20>;
+	};
+
+	mixer: mixer@14450000 {
 		compatible = "samsung,exynos5420-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
-		clocks = <&clock 431>, <&clock 143>;
+		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
 		clock-names = "mixer", "sclk_hdmi";
 	};
 
@@ -599,7 +707,7 @@
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
-		clocks = <&clock 465>;
+		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
 		samsung,power-domain = <&gsc_pd>;
 	};
@@ -608,16 +716,26 @@
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
-		clocks = <&clock 466>;
+		clocks = <&clock CLK_GSCL1>;
 		clock-names = "gscl";
 		samsung,power-domain = <&gsc_pd>;
 	};
 
+	pmu_system_controller: system-controller@10040000 {
+		compatible = "samsung,exynos5420-pmu", "syscon";
+		reg = <0x10040000 0x5000>;
+	};
+
+	sysreg_system_controller: syscon@10050000 {
+		compatible = "samsung,exynos5-sysreg", "syscon";
+		reg = <0x10050000 0x5000>;
+	};
+
 	tmu_cpu0: tmu@10060000 {
 		compatible = "samsung,exynos5420-tmu";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 65 0>;
-		clocks = <&clock 318>;
+		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
 	};
 
@@ -625,7 +743,7 @@
 		compatible = "samsung,exynos5420-tmu";
 		reg = <0x10064000 0x100>;
 		interrupts = <0 183 0>;
-		clocks = <&clock 318>;
+		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
 	};
 
@@ -633,7 +751,7 @@
 		compatible = "samsung,exynos5420-tmu-ext-triminfo";
 		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
 		interrupts = <0 184 0>;
-		clocks = <&clock 318>, <&clock 318>;
+		clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
 	};
 
@@ -641,7 +759,7 @@
 		compatible = "samsung,exynos5420-tmu-ext-triminfo";
 		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
 		interrupts = <0 185 0>;
-		clocks = <&clock 318>, <&clock 319>;
+		clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
 	};
 
@@ -649,7 +767,116 @@
 		compatible = "samsung,exynos5420-tmu-ext-triminfo";
 		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
 		interrupts = <0 215 0>;
-		clocks = <&clock 319>, <&clock 318>;
+		clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
 	};
+
+        watchdog: watchdog@101D0000 {
+		compatible = "samsung,exynos5420-wdt";
+		reg = <0x101D0000 0x100>;
+		interrupts = <0 42 0>;
+		clocks = <&clock CLK_WDT>;
+		clock-names = "watchdog";
+		samsung,syscon-phandle = <&pmu_system_controller>;
+        };
+
+	sss: sss@10830000 {
+		compatible = "samsung,exynos4210-secss";
+		reg = <0x10830000 0x10000>;
+		interrupts = <0 112 0>;
+		clocks = <&clock CLK_SSS>;
+		clock-names = "secss";
+	};
+
+	usbdrd3_0: usb@12000000 {
+		compatible = "samsung,exynos5250-dwusb3";
+		clocks = <&clock CLK_USBD300>;
+		clock-names = "usbdrd30";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dwc3 {
+			compatible = "snps,dwc3";
+			reg = <0x12000000 0x10000>;
+			interrupts = <0 72 0>;
+			phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+			phy-names = "usb2-phy", "usb3-phy";
+		};
+	};
+
+	usbdrd_phy0: phy@12100000 {
+		compatible = "samsung,exynos5420-usbdrd-phy";
+		reg = <0x12100000 0x100>;
+		clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+		clock-names = "phy", "ref";
+		samsung,pmu-syscon = <&pmu_system_controller>;
+		#phy-cells = <1>;
+	};
+
+	usbdrd3_1: usb@12400000 {
+		compatible = "samsung,exynos5250-dwusb3";
+		clocks = <&clock CLK_USBD301>;
+		clock-names = "usbdrd30";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dwc3 {
+			compatible = "snps,dwc3";
+			reg = <0x12400000 0x10000>;
+			interrupts = <0 73 0>;
+			phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+			phy-names = "usb2-phy", "usb3-phy";
+		};
+	};
+
+	usbdrd_phy1: phy@12500000 {
+		compatible = "samsung,exynos5420-usbdrd-phy";
+		reg = <0x12500000 0x100>;
+		clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+		clock-names = "phy", "ref";
+		samsung,pmu-syscon = <&pmu_system_controller>;
+		#phy-cells = <1>;
+	};
+
+	usbhost2: usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock CLK_USBH20>;
+		clock-names = "usbhost";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			phys = <&usb2_phy 1>;
+		};
+	};
+
+	usbhost1: usb@12120000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12120000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock CLK_USBH20>;
+		clock-names = "usbhost";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			phys = <&usb2_phy 1>;
+		};
+	};
+
+	usb2_phy: phy@12130000 {
+		compatible = "samsung,exynos5250-usb2-phy";
+		reg = <0x12130000 0x100>;
+		clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+		clock-names = "phy", "ref";
+		#phy-cells = <1>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		samsung,pmureg-phandle = <&pmu_system_controller>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
index 777fb1c2c70f..268609a42b2c 100644
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "SAMSUNG SD5v1 board based on EXYNOS5440";
-	compatible = "samsung,sd5v1", "samsung,exynos5440";
+	compatible = "samsung,sd5v1", "samsung,exynos5440", "samsung,exynos5";
 
 	chosen {
 		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index d58cb787061a..ff55dac6e219 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
-	compatible = "samsung,ssdk5440", "samsung,exynos5440";
+	compatible = "samsung,ssdk5440", "samsung,exynos5440", "samsung,exynos5";
 
 	chosen {
 		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 02a0a1226cef..ae3a17c791f6 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -9,10 +9,11 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/clock/exynos5440.h>
 #include "skeleton.dtsi"
 
 / {
-	compatible = "samsung,exynos5440";
+	compatible = "samsung,exynos5440", "samsung,exynos5";
 
 	interrupt-parent = <&gic>;
 
@@ -105,7 +106,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xB0000 0x1000>;
 		interrupts = <0 2 0>;
-		clocks = <&clock 21>, <&clock 21>;
+		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
@@ -113,7 +114,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xC0000 0x1000>;
 		interrupts = <0 3 0>;
-		clocks = <&clock 21>, <&clock 21>;
+		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
@@ -125,7 +126,7 @@
 		#size-cells = <0>;
 		samsung,spi-src-clk = <0>;
 		num-cs = <1>;
-		clocks = <&clock 21>, <&clock 16>;
+		clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
 		clock-names = "spi", "spi_busclk0";
 	};
 
@@ -161,7 +162,7 @@
 		interrupts = <0 5 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "i2c";
 	};
 
@@ -171,15 +172,15 @@
 		interrupts = <0 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "i2c";
 	};
 
-	watchdog {
+	watchdog@110000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x110000 0x1000>;
 		interrupts = <0 1 0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "watchdog";
 	};
 
@@ -190,7 +191,7 @@
 		interrupts = <0 31 4>;
 		interrupt-names = "macirq";
 		phy-mode = "sgmii";
-		clocks = <&clock 25>;
+		clocks = <&clock CLK_GMAC0>;
 		clock-names = "stmmaceth";
 	};
 
@@ -206,7 +207,7 @@
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
 		interrupts = <0 17 0>, <0 16 0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "rtc";
 	};
 
@@ -214,7 +215,7 @@
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x160118 0x230>, <0x160368 0x10>;
 		interrupts = <0 58 0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 	};
 
@@ -222,7 +223,7 @@
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x16011C 0x230>, <0x160368 0x10>;
 		interrupts = <0 58 0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 	};
 
@@ -230,7 +231,7 @@
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x160120 0x230>, <0x160368 0x10>;
 		interrupts = <0 58 0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 	};
 
@@ -238,7 +239,7 @@
 		compatible = "snps,exynos5440-ahci";
 		reg = <0x210000 0x10000>;
 		interrupts = <0 30 0>;
-		clocks = <&clock 23>;
+		clocks = <&clock CLK_SATA>;
 		clock-names = "sata";
 	};
 
@@ -246,7 +247,7 @@
 		compatible = "samsung,exynos5440-ohci";
 		reg = <0x220000 0x1000>;
 		interrupts = <0 29 0>;
-		clocks = <&clock 24>;
+		clocks = <&clock CLK_USB>;
 		clock-names = "usbhost";
 	};
 
@@ -254,7 +255,7 @@
 		compatible = "samsung,exynos5440-ehci";
 		reg = <0x221000 0x1000>;
 		interrupts = <0 29 0>;
-		clocks = <&clock 24>;
+		clocks = <&clock CLK_USB>;
 		clock-names = "usbhost";
 	};
 
@@ -264,7 +265,7 @@
 			0x270000 0x1000
 			0x271000 0x40>;
 		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
-		clocks = <&clock 28>, <&clock 27>;
+		clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
 		clock-names = "pcie", "pcie_bus";
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -285,7 +286,7 @@
 			0x272000 0x1000
 			0x271040 0x40>;
 		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
-		clocks = <&clock 29>, <&clock 27>;
+		clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
 		clock-names = "pcie", "pcie_bus";
 		#address-cells = <3>;
 		#size-cells = <2>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
new file mode 100644
index 000000000000..f3af2079a063
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -0,0 +1,253 @@
+/*
+ * Google Peach Pi Rev 10+ board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5800.dtsi"
+
+/ {
+	model = "Google Peach Pi Rev 10+";
+
+	compatible = "google,pi-rev16",
+		"google,pi-rev15", "google,pi-rev14",
+		"google,pi-rev13", "google,pi-rev12",
+		"google,pi-rev11", "google,pi-rev10",
+		"google,pi", "google,peach", "samsung,exynos5800",
+		"samsung,exynos5";
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	usb300_vbus_reg: regulator-usb300 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb300_vbus_en>;
+		enable-active-high;
+	};
+
+	usb301_vbus_reg: regulator-usb301 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 1 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb301_vbus_en>;
+		enable-active-high;
+	};
+};
+
+&pinctrl_0 {
+	tpm_irq: tpm-irq {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	dp_hpd_gpio: dp_hpd_gpio {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_3 {
+	usb300_vbus_en: usb300-vbus-en {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb301_vbus_en: usb301-vbus-en {
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&uart_3 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	caps2-mmc-hs200-1_8v;
+	supports-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd_gpio>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx2 6 0>;
+
+	display-timings {
+		native-mode = <&timing1>;
+
+		timing1: timing@1 {
+			clock-frequency = <150660000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hfront-porch = <60>;
+			hback-porch = <172>;
+			hsync-len = <80>;
+			vback-porch = <25>;
+			vfront-porch = <10>;
+			vsync-len = <10>;
+		};
+	};
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hsi2c_9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+		/* Unused irq; but still need to configure the pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpm_irq>;
+	};
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+};
+
+&usbdrd_phy0 {
+	vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd_phy1 {
+	vbus-supply = <&usb301_vbus_reg>;
+};
+
+/*
+ * Use longest HW watchdog in SoC (32 seconds) since the hardware
+ * watchdog provides no debugging information (compared to soft/hard
+ * lockup detectors) and so should be last resort.
+ */
+&watchdog {
+	timeout-sec = <32>;
+};
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
new file mode 100644
index 000000000000..c0bb3563cac1
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5800.dtsi
@@ -0,0 +1,28 @@
+/*
+ * SAMSUNG EXYNOS5800 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file.
+ * EXYNOS5800 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos5420.dtsi"
+
+/ {
+	compatible = "samsung,exynos5800", "samsung,exynos5";
+};
+
+&clock {
+	compatible = "samsung,exynos5800-clock";
+};
+
+&mfc {
+	compatible = "samsung,mfc-v8";
+};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 1f026adefd45..a33f66c11b73 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -127,17 +127,21 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_vddio_sd0: vddio-sd0 {
+		reg_vddio_sd0: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "vddio-sd0";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio1 29 0>;
 		};
 
-		reg_lcd_3v3: lcd-3v3 {
+		reg_lcd_3v3: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "lcd-3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 526bfdbd87f9..7e6eef2488e8 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -100,9 +100,12 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb0_vbus: usb0_vbus {
+		reg_usb0_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index cb64e2b191ea..455169e99d49 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -66,9 +66,12 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_vddio_sd0: vddio-sd0 {
+		reg_vddio_sd0: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "vddio-sd0";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 581b75433be6..bbcfb5a19c77 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -23,6 +23,7 @@
 		serial1 = &auart1;
 		spi0 = &ssp0;
 		spi1 = &ssp1;
+		usbphy0 = &usbphy0;
 	};
 
 	cpus {
@@ -428,7 +429,7 @@
 				status = "disabled";
 			};
 
-			lradc@80050000 {
+			lradc: lradc@80050000 {
 				compatible = "fsl,imx23-lradc";
 				reg = <0x80050000 0x2000>;
 				interrupts = <36 37 38 39 40 41 42 43 44>;
@@ -526,4 +527,9 @@
 			status = "disabled";
 		};
 	};
+
+	iio_hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&lradc 8>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
new file mode 100644
index 000000000000..d6f27641c0ef
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX25";
+	compatible = "eukrea,cpuimx25", "fsl,imx25";
+
+	memory {
+		reg = <0x80000000 0x4000000>; /* 64M */
+	};
+};
+
+&fec {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-cpuimx25 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
+				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
+				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
+				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
+				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
+				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
+				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
new file mode 100644
index 000000000000..ad12da38fc92
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -0,0 +1,187 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx25-eukrea-cpuimx25.dtsi"
+
+/ {
+	model = "Eukrea MBIMXSD25";
+	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		bp1 {
+			label = "BP1";
+			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx25-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,mux-int-port = <1>;
+		fsl,mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 20>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX25_PAD_KPP_COL3__AUD5_TXFS		0xe0
+				MX25_PAD_KPP_COL2__AUD5_TXC		0xe0
+				MX25_PAD_KPP_COL1__AUD5_RXD		0xe0
+				MX25_PAD_KPP_COL0__AUD5_TXD		0xe0
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX25_PAD_SD1_CMD__SD1_CMD		0x400000c0
+				MX25_PAD_SD1_CLK__SD1_CLK		0x400000c0
+				MX25_PAD_SD1_DATA0__SD1_DATA0		0x400000c0
+				MX25_PAD_SD1_DATA1__SD1_DATA1		0x400000c0
+				MX25_PAD_SD1_DATA2__SD1_DATA2		0x400000c0
+				MX25_PAD_SD1_DATA3__SD1_DATA3		0x400000c0
+			>;
+		};
+
+		pinctrl_gpiokeys: gpiokeysgrp {
+			fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
+		};
+
+		pinctrl_gpioled: gpioledgrp {
+			fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
+		};
+
+		pinctrl_lcdc: lcdcgrp {
+			fsl,pins = <
+				MX25_PAD_LD0__LD0			0x1
+				MX25_PAD_LD1__LD1			0x1
+				MX25_PAD_LD2__LD2			0x1
+				MX25_PAD_LD3__LD3			0x1
+				MX25_PAD_LD4__LD4			0x1
+				MX25_PAD_LD5__LD5			0x1
+				MX25_PAD_LD6__LD6			0x1
+				MX25_PAD_LD7__LD7			0x1
+				MX25_PAD_LD8__LD8			0x1
+				MX25_PAD_LD9__LD9			0x1
+				MX25_PAD_LD10__LD10			0x1
+				MX25_PAD_LD11__LD11			0x1
+				MX25_PAD_LD12__LD12			0x1
+				MX25_PAD_LD13__LD13			0x1
+				MX25_PAD_LD14__LD14			0x1
+				MX25_PAD_LD15__LD15			0x1
+				MX25_PAD_GPIO_E__LD16			0x1
+				MX25_PAD_GPIO_F__LD17			0x1
+				MX25_PAD_HSYNC__HSYNC			0x80000000
+				MX25_PAD_VSYNC__VSYNC			0x80000000
+				MX25_PAD_LSCLK__LSCLK			0x80000000
+				MX25_PAD_OE_ACD__OE_ACD			0x80000000
+				MX25_PAD_CONTRAST__CONTRAST		0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
+				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
+				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
+				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX25_PAD_UART2_RXD__UART2_RXD		0x80000000
+				MX25_PAD_UART2_TXD__UART2_TXD		0x80000000
+				MX25_PAD_UART2_RTS__UART2_RTS		0x80000000
+				MX25_PAD_UART2_CTS__UART2_CTS		0x80000000
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	codec-handle = <&tlv320aic23>;
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	phy_type = "serial";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "otg";
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
index f8db366c46ff..9b31faa96377 100644
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ b/arch/arm/boot/dts/imx25-karo-tx25.dts
@@ -16,21 +16,98 @@
 	model = "Ka-Ro TX25";
 	compatible = "karo,imx25-tx25", "fsl,imx25";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_fec_phy: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "fec-phy";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 9 0>;
+			enable-active-high;
+		};
+	};
+
 	memory {
 		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
 	};
 };
 
+&iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+			MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
+			MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
+			MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX25_PAD_D11__GPIO_4_9		0x80000000 /* FEC PHY power on pin */
+			MX25_PAD_D13__GPIO_4_7		0x80000000 /* FEC reset */
+			MX25_PAD_FEC_MDC__FEC_MDC	0x80000000
+			MX25_PAD_FEC_MDIO__FEC_MDIO	0x80000000
+			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x80000000
+			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x80000000
+			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x80000000
+			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x80000000
+			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x80000000
+			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x80000000
+			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x80000000
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			MX25_PAD_NF_CE0__NF_CE0		0x80000000
+			MX25_PAD_NFWE_B__NFWE_B		0x80000000
+			MX25_PAD_NFRE_B__NFRE_B		0x80000000
+			MX25_PAD_NFALE__NFALE		0x80000000
+			MX25_PAD_NFCLE__NFCLE		0x80000000
+			MX25_PAD_NFWP_B__NFWP_B		0x80000000
+			MX25_PAD_NFRB__NFRB		0x80000000
+			MX25_PAD_D7__D7			0x80000000
+			MX25_PAD_D6__D6			0x80000000
+			MX25_PAD_D5__D5			0x80000000
+			MX25_PAD_D4__D4			0x80000000
+			MX25_PAD_D3__D3			0x80000000
+			MX25_PAD_D2__D2			0x80000000
+			MX25_PAD_D1__D1			0x80000000
+			MX25_PAD_D0__D0			0x80000000
+		>;
+	};
+};
+
 &uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-reset-gpios = <&gpio3 7 0>;
 	phy-mode = "rmii";
+	phy-supply = <&reg_fec_phy>;
 	status = "okay";
 };
 
 &nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
 	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	nand-bus-width = <8>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index f607ce520eda..c608942b8a3b 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -10,6 +10,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "imx25.dtsi"
 
 / {
@@ -19,18 +20,232 @@
 	memory {
 		reg = <0x80000000 0x4000000>;
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_fec_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "fec-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 3 0>;
+			enable-active-high;
+		};
+
+		reg_2p5v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		reg_can_3v3: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "can-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 6 0>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx25-pdk-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx25-pdk-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
 };
 
-&uart1 {
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio2 1 0>;
+	wp-gpios = <&gpio2 0 0>;
 	status = "okay";
 };
 
 &fec {
 	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-supply = <&reg_fec_3v3>;
+	phy-reset-gpios = <&gpio4 8 0>;
 	status = "okay";
 };
 
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 129>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	imx25-pdk {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX25_PAD_RW__AUD4_TXFS			0xe0
+				MX25_PAD_OE__AUD4_TXC			0xe0
+				MX25_PAD_EB0__AUD4_TXD			0xe0
+				MX25_PAD_EB1__AUD4_RXD			0xe0
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX25_PAD_GPIO_A__CAN1_TX		0x0
+				MX25_PAD_GPIO_B__CAN1_RX		0x0
+				MX25_PAD_D14__GPIO_4_6 			0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX25_PAD_SD1_CMD__SD1_CMD		0x80000000
+				MX25_PAD_SD1_CLK__SD1_CLK		0x80000000
+				MX25_PAD_SD1_DATA0__SD1_DATA0		0x80000000
+				MX25_PAD_SD1_DATA1__SD1_DATA1		0x80000000
+				MX25_PAD_SD1_DATA2__SD1_DATA2		0x80000000
+				MX25_PAD_SD1_DATA3__SD1_DATA3		0x80000000
+				MX25_PAD_A14__GPIO_2_0			0x80000000
+				MX25_PAD_A15__GPIO_2_1			0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
+				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
+				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
+				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
+				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
+				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
+				MX25_PAD_A17__GPIO_2_3			0x80000000
+				MX25_PAD_D12__GPIO_4_8			0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
+				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX25_PAD_KPP_ROW0__KPP_ROW0	0x80000000
+				MX25_PAD_KPP_ROW1__KPP_ROW1	0x80000000
+				MX25_PAD_KPP_ROW2__KPP_ROW2	0x80000000
+				MX25_PAD_KPP_ROW3__KPP_ROW3	0x80000000
+				MX25_PAD_KPP_COL0__KPP_COL0	0x80000000
+				MX25_PAD_KPP_COL1__KPP_COL1	0x80000000
+				MX25_PAD_KPP_COL2__KPP_COL2	0x80000000
+				MX25_PAD_KPP_COL3__KPP_COL3	0x80000000
+			>;
+		};
+
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
+				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
+				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
+				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
+			>;
+		};
+	};
+};
+
 &nfc {
 	nand-on-flash-bbt;
 	status = "okay";
 };
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+			MATRIX_KEY(0x0, 0x0, KEY_UP)
+			MATRIX_KEY(0x0, 0x1, KEY_DOWN)
+			MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN)
+			MATRIX_KEY(0x0, 0x3, KEY_HOME)
+			MATRIX_KEY(0x1, 0x0, KEY_RIGHT)
+			MATRIX_KEY(0x1, 0x1, KEY_LEFT)
+			MATRIX_KEY(0x1, 0x2, KEY_ENTER)
+			MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP)
+			MATRIX_KEY(0x2, 0x0, KEY_F6)
+			MATRIX_KEY(0x2, 0x1, KEY_F8)
+			MATRIX_KEY(0x2, 0x2, KEY_F9)
+			MATRIX_KEY(0x2, 0x3, KEY_F10)
+			MATRIX_KEY(0x3, 0x0, KEY_F1)
+			MATRIX_KEY(0x3, 0x1, KEY_F2)
+			MATRIX_KEY(0x3, 0x2, KEY_F3)
+			MATRIX_KEY(0x3, 0x2, KEY_POWER)
+	>;
+	status = "okay";
+};
+
+&ssi1 {
+	codec-handle = <&codec>;
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	phy_type = "serial";
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
new file mode 100644
index 000000000000..9238a95d8e62
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -0,0 +1,494 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ * Based on imx35-pinfunc.h in the same directory Which is:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX25_PINFUNC_H
+#define __DTS_IMX25_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX25_PAD_A10__A10			0x008 0x000 0x000 0x00 0x000
+#define MX25_PAD_A10__GPIO_4_0			0x008 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_A13__A13			0x00c 0x22C 0x000 0x00 0x000
+#define MX25_PAD_A13__GPIO_4_1			0x00c 0x22C 0x000 0x05 0x000
+
+#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x10 0x000
+#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x15 0x000
+
+#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x10 0x000
+#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x15 0x000
+
+#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x10 0x000
+#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x10 0x000
+#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x15 0x000
+
+#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x10 0x000
+#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x15 0x000
+#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x17 0x000
+
+#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x10 0x000
+#define MX25_PAD_A19__FEC_RX_ER			0x024 0x240 0x518 0x17 0x000
+#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x15 0x000
+
+#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x10 0x000
+#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x15 0x000
+#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x17 0x000
+
+#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x10 0x000
+#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x15 0x000
+#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x17 0x000
+
+#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x10 0x000
+#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x10 0x000
+#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x15 0x000
+
+#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x10 0x000
+#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x15 0x000
+#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x17 0x000
+
+#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x10 0x000
+#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x15 0x000
+#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x17 0x000
+
+#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x10 0x000
+#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x14 0x000
+#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x15 0x000
+
+#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x10 0x000
+#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x14 0x000
+#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x15 0x000
+
+#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x10 0x000
+#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x14 0x000
+#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x15 0x000
+
+#define MX25_PAD_CS0__CS0			0x04c 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS0__GPIO_4_2			0x04c 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS1__CS1			0x050 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS1__NF_CE3			0x050 0x000 0x000 0x01 0x000
+#define MX25_PAD_CS1__GPIO_4_3			0x050 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x10 0x000
+#define MX25_PAD_CS4__NF_CE1			0x054 0x264 0x000 0x01 0x000
+#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x13 0x000
+#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x15 0x000
+
+#define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x10 0x000
+#define MX25_PAD_CS5__NF_CE2			0x058 0x268 0x000 0x01 0x000
+#define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x13 0x000
+#define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x15 0x000
+
+#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x10 0x000
+#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x15 0x000
+
+#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x10 0x000
+#define MX25_PAD_ECB__UART5_TXD_MUX		0x060 0x270 0x000 0x13 0x000
+#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x15 0x000
+
+#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x10 0x000
+#define MX25_PAD_LBA__UART5_RXD_MUX		0x064 0x274 0x578 0x13 0x000
+#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x15 0x000
+
+#define MX25_PAD_BCLK__BCLK			0x068 0x000 0x000 0x00 0x000
+#define MX25_PAD_BCLK__GPIO_4_4			0x068 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x10 0x000
+#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x14 0x000
+#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x15 0x000
+
+#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x10 0x000
+#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x15 0x000
+
+#define MX25_PAD_D15__D15			0x088 0x280 0x000 0x00 0x000
+#define MX25_PAD_D15__LD16			0x088 0x280 0x000 0x01 0x000
+#define MX25_PAD_D15__GPIO_4_5			0x088 0x280 0x000 0x05 0x000
+
+#define MX25_PAD_D14__D14			0x08c 0x284 0x000 0x00 0x000
+#define MX25_PAD_D14__LD17			0x08c 0x284 0x000 0x01 0x000
+#define MX25_PAD_D14__GPIO_4_6			0x08c 0x284 0x000 0x05 0x000
+
+#define MX25_PAD_D13__D13			0x090 0x288 0x000 0x00 0x000
+#define MX25_PAD_D13__LD18			0x090 0x288 0x000 0x01 0x000
+#define MX25_PAD_D13__GPIO_4_7			0x090 0x288 0x000 0x05 0x000
+
+#define MX25_PAD_D12__D12			0x094 0x28c 0x000 0x00 0x000
+#define MX25_PAD_D12__GPIO_4_8			0x094 0x28c 0x000 0x05 0x000
+
+#define MX25_PAD_D11__D11			0x098 0x290 0x000 0x00 0x000
+#define MX25_PAD_D11__GPIO_4_9			0x098 0x290 0x000 0x05 0x000
+
+#define MX25_PAD_D10__D10			0x09c 0x294 0x000 0x00 0x000
+#define MX25_PAD_D10__GPIO_4_10			0x09c 0x294 0x000 0x05 0x000
+#define MX25_PAD_D10__USBOTG_OC			0x09c 0x294 0x57c 0x06 0x000
+
+#define MX25_PAD_D9__D9				0x0a0 0x298 0x000 0x00 0x000
+#define MX25_PAD_D9__GPIO_4_11			0x0a0 0x298 0x000 0x05 0x000
+#define MX25_PAD_D9__USBH2_PWR			0x0a0 0x298 0x000 0x06 0x000
+
+#define MX25_PAD_D8__D8				0x0a4 0x29c 0x000 0x00 0x000
+#define MX25_PAD_D8__GPIO_4_12			0x0a4 0x29c 0x000 0x05 0x000
+#define MX25_PAD_D8__USBH2_OC			0x0a4 0x29c 0x580 0x06 0x000
+
+#define MX25_PAD_D7__D7				0x0a8 0x2a0 0x000 0x00 0x000
+#define MX25_PAD_D7__GPIO_4_13			0x0a8 0x2a0 0x000 0x05 0x000
+
+#define MX25_PAD_D6__D6				0x0ac 0x2a4 0x000 0x00 0x000
+#define MX25_PAD_D6__GPIO_4_14			0x0ac 0x2a4 0x000 0x05 0x000
+
+#define MX25_PAD_D5__D5				0x0b0 0x2a8 0x000 0x00 0x000
+#define MX25_PAD_D5__GPIO_4_15			0x0b0 0x2a8 0x000 0x05 0x000
+
+#define MX25_PAD_D4__D4				0x0b4 0x2ac 0x000 0x00 0x000
+#define MX25_PAD_D4__GPIO_4_16			0x0b4 0x2ac 0x000 0x05 0x000
+
+#define MX25_PAD_D3__D3				0x0b8 0x2b0 0x000 0x00 0x000
+#define MX25_PAD_D3__GPIO_4_17			0x0b8 0x2b0 0x000 0x05 0x000
+
+#define MX25_PAD_D2__D2				0x0bc 0x2b4 0x000 0x00 0x000
+#define MX25_PAD_D2__GPIO_4_18			0x0bc 0x2b4 0x000 0x05 0x000
+
+#define MX25_PAD_D1__D1				0x0c0 0x2b8 0x000 0x00 0x000
+#define MX25_PAD_D1__GPIO_4_19			0x0c0 0x2b8 0x000 0x05 0x000
+
+#define MX25_PAD_D0__D0				0x0c4 0x2bc 0x000 0x00 0x000
+#define MX25_PAD_D0__GPIO_4_20			0x0c4 0x2bc 0x000 0x05 0x000
+
+#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x10 0x000
+#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x12 0x000
+#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x15 0x000
+
+#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x10 0x000
+#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x12 0x000
+#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x15 0x000
+
+#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x10 0x000
+#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x15 0x000
+
+#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x10 0x000
+#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x15 0x000
+
+#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x10 0x000
+#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x15 0x000
+
+#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x10 0x000
+#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x15 0x000
+
+#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x10 0x000
+#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x15 0x000
+
+#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x10 0x000
+#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x15 0x000
+
+#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x10 0x000
+#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x15 0x000
+
+#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x10 0x000
+#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x15 0x001
+
+#define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x10 0x000
+#define MX25_PAD_LD10__FEC_RX_ER		0x0f0 0x2e8 0x518 0x15 0x001
+
+#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x10 0x000
+#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x15 0x001
+
+#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x10 0x000
+#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x15 0x001
+
+#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x10 0x000
+#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x15 0x000
+
+#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x10 0x000
+#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x15 0x000
+
+#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x10 0x000
+#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x15 0x001
+
+#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x10 0x000
+#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x15 0x000
+
+#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x10 0x000
+#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x15 0x000
+
+#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x10 0x000
+#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x15 0x000
+
+#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x10 0x000
+#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x15 0x000
+
+#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x10 0x000
+#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x14 0x000
+#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x15 0x001
+
+#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x10 0x000
+#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x15 0x000
+#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x16 0x001
+
+#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x10 0x000
+#define MX25_PAD_CSI_D2__UART5_RXD_MUX		0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x15 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x10 0x000
+#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x15 0x000
+#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x17 0x001
+
+#define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x10 0x000
+#define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x11 0x001
+#define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x15 0x000
+#define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x10 0x000
+#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x15 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x10 0x000
+#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x10 0x000
+#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x10 0x000
+#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x10 0x000
+#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x10 0x000
+#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x10 0x000
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x10 0x000
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x10 0x000
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x15 0x000
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x10 0x000
+#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x15 0x000
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x10 0x000
+#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1		0x164 0x35c 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17		0x164 0x35c 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_RXD__UART1_RXD		0x170 0x368 0x000 0x10 0x000
+#define MX25_PAD_UART1_RXD__GPIO_4_22		0x170 0x368 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_TXD__UART1_TXD		0x174 0x36c 0x000 0x10 0x000
+#define MX25_PAD_UART1_TXD__GPIO_4_23		0x174 0x36c 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_RTS__UART1_RTS		0x178 0x370 0x000 0x10 0x000
+#define MX25_PAD_UART1_RTS__CSI_D0		0x178 0x370 0x488 0x11 0x001
+#define MX25_PAD_UART1_RTS__GPIO_4_24		0x178 0x370 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_CTS__UART1_CTS		0x17c 0x374 0x000 0x10 0x000
+#define MX25_PAD_UART1_CTS__CSI_D1		0x17c 0x374 0x48c 0x11 0x001
+#define MX25_PAD_UART1_CTS__GPIO_4_25		0x17c 0x374 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x10 0x000
+#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x10 0x000
+#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_RTS__UART2_RTS		0x188 0x380 0x000 0x10 0x000
+#define MX25_PAD_UART2_RTS__FEC_COL		0x188 0x380 0x504 0x12 0x002
+#define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_CTS__FEC_RX_ER		0x18c 0x384 0x518 0x12 0x002
+#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x10 0x000
+#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_CMD__SD1_CMD		0x190 0x388 0x000 0x10 0x000
+#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x12 0x002
+#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_CLK__SD1_CLK		0x194 0x38c 0x000 0x10 0x000
+#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x12 0x002
+#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0		0x198 0x390 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1		0x19c 0x394 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x13 0x000
+#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2		0x1a0 0x398 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x15 0x002
+#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3		0x1a4 0x39c 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x10 0x002
+#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW0__GPIO_2_29		0x1a8 0x3a0 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1		0x1ac 0x3a4 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW1__GPIO_2_30		0x1ac 0x3a4 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2		0x1b0 0x3a8 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW2__CSI_D0		0x1b0 0x3a8 0x488 0x13 0x002
+#define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW3__CSI_LD1		0x1b4 0x3ac 0x48c 0x13 0x002
+#define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL0__UART4_RXD_MUX	0x1b8 0x3b0 0x570 0x11 0x001
+#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL1__UART4_TXD_MUX	0x1bc 0x3b4 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL2__KPP_COL2		0x1c0 0x3b8 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL2__UART4_RTS		0x1c0 0x3b8 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL2__AUD5_TXC		0x1c0 0x3b8 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL2__GPIO_3_3		0x1c0 0x3b8 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x10 0x000
+#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x12 0x001
+#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x10 0x000
+#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x12 0x001
+#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x10 0x000
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x10 0x000
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x12 0x001
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x10 0x000
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x10 0x000
+#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x14 0x000
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x10 0x000
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x15 0x000
+
+#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x10 0x000
+#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x11 0x000
+#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x15 0x000
+
+#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x10 0x000
+#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x15 0x000
+
+#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
+
+#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x10 0x000
+#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x16 0x000
+#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x12 0x000
+
+#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x10 0x000
+#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x16 0x001
+#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x12 0x001
+
+#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x10 0x000
+#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x16 0x000
+
+#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x10 0x000
+#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
+#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x16 0x001
+
+#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x10 0x000
+#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
+#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x14 0x000
+
+#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x10 0x000
+#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x14 0x000
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x10 0x000
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x10 0x000
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x10 0x000
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x14 0x000
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x15 0x000
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x10 0x000
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x15 0x000
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x10 0x000
+#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x14 0x001
+#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x15 0x000
+
+#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x10 0x000
+#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x15 0x000
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0		0x224 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30		0x224 0x000 0x000 0x05 0x000
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1		0x228 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31		0x228 0x000 0x000 0x05 0x000
+
+#endif /* __DTS_IMX25_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 737ed5da8f71..bb74d9582b7e 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -10,9 +10,11 @@
  */
 
 #include "skeleton.dtsi"
+#include "imx25-pinfunc.h"
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -20,6 +22,8 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -55,6 +59,7 @@
 
 		osc {
 			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
@@ -163,9 +168,10 @@
 				status = "disabled";
 			};
 
-			kpp@43fa8000 {
+			kpp: kpp@43fa8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
+				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
 				reg = <0x43fa8000 0x4000>;
 				clocks = <&clks 102>;
 				clock-names = "";
@@ -173,12 +179,12 @@
 				status = "disabled";
 			};
 
-			iomuxc@43fac000{
+			iomuxc: iomuxc@43fac000 {
 				compatible = "fsl,imx25-iomuxc";
 				reg = <0x43fac000 0x4000>;
 			};
 
-			audmux@43fb0000 {
+			audmux: audmux@43fb0000 {
 				compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
 				reg = <0x43fb0000 0x4000>;
 				status = "disabled";
@@ -236,6 +242,11 @@
 				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 				reg = <0x50014000 0x4000>;
 				interrupts = <11>;
+				clocks = <&clks 118>;
+				clock-names = "ipg";
+				dmas = <&sdma 24 1 0>,
+				       <&sdma 25 1 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -266,6 +277,11 @@
 				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 				reg = <0x50034000 0x4000>;
 				interrupts = <12>;
+				clocks = <&clks 117>;
+				clock-names = "ipg";
+				dmas = <&sdma 28 1 0>,
+				       <&sdma 29 1 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -436,13 +452,14 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma@53fd4000 {
+			sdma: sdma@53fd4000 {
 				compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 112>, <&clks 68>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				interrupts = <34>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
 			};
 
 			wdog@53fdc000 {
@@ -469,23 +486,13 @@
 				clocks = <&clks 99>;
 			};
 
-			usbphy1: usbphy@1 {
-				compatible = "nop-usbphy";
-				status = "disabled";
-			};
-
-			usbphy2: usbphy@2 {
-				compatible = "nop-usbphy";
-				status = "disabled";
-			};
-
 			usbotg: usb@53ff4000 {
 				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 				reg = <0x53ff4000 0x0200>;
 				interrupts = <37>;
-				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
-				clock-names = "ipg", "ahb", "per";
+				clocks = <&clks 70>;
 				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
 				status = "disabled";
 			};
 
@@ -493,9 +500,9 @@
 				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 				reg = <0x53ff4400 0x0200>;
 				interrupts = <35>;
-				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
-				clock-names = "ipg", "ahb", "per";
+				clocks = <&clks 70>;
 				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
 				status = "disabled";
 			};
 
@@ -505,7 +512,6 @@
 				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 				clock-names = "ipg", "ahb", "per";
 				reg = <0x53ff4600 0x00f>;
-				status = "disabled";
 			};
 
 			dryice@53ffc000 {
@@ -517,6 +523,11 @@
 			};
 		};
 
+		iram: sram@78000000 {
+			compatible = "mmio-sram";
+			reg = <0x78000000 0x20000>;
+		};
+
 		emi@80000000 {
 			compatible = "fsl,emi-bus", "simple-bus";
 			#address-cells = <1>;
@@ -537,4 +548,20 @@
 			};
 		};
 	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usb-phy@0 {
+			reg = <0>;
+			compatible = "usb-nop-xceiv";
+		};
+
+		usbphy1: usb-phy@1 {
+			reg = <1>;
+			compatible = "usb-nop-xceiv";
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
index ba4c6df08ece..73aae4f5e539 100644
--- a/arch/arm/boot/dts/imx27-apf27.dts
+++ b/arch/arm/boot/dts/imx27-apf27.dts
@@ -29,16 +29,55 @@
 
 		osc26m {
 			compatible = "fsl,imx-osc26m", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 	};
 };
 
+&iomuxc {
+	imx27-apf27 {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+			>;
+		};
+	};
+};
+
 &uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
index 47c8c26012e4..2b6d489dae69 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -22,10 +22,10 @@
 		bits-per-pixel = <16>;  /* non-standard but required */
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
-			timing0: 640x480 {
+			timing0: 800x480 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
-				vactive = <640>;
+				vactive = <480>;
 				hback-porch = <96>;
 				hfront-porch = <96>;
 				vback-porch = <20>;
@@ -38,20 +38,24 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
 
 		user-key {
 			label = "user";
-			gpios = <&gpio6 13 0>;
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
 			linux,code = <276>; /* BTN_EXTRA */
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		user {
 			label = "Heartbeat";
-			gpios = <&gpio6 14 0>;
+			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -59,25 +63,34 @@
 
 &cspi1 {
 	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 28 1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
 	status = "okay";
 };
 
 &cspi2 {
 	fsl,spi-num-chipselects = <3>;
-	cs-gpios = <&gpio4 21 1>, <&gpio4 27 1>,
-			<&gpio2 17 1>;
+	cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>,
+		   <&gpio2 17 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi2 &pinctrl_cspi2_cs>;
 	status = "okay";
 };
 
 &fb {
 	display = <&display>;
 	fsl,dmacr = <0x00020010>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb1>;
 	status = "okay";
 };
 
 &i2c1 {
 	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
 	rtc@68 {
@@ -87,5 +100,127 @@
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 };
+
+&iomuxc {
+	imx27-apf27dev {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+			>;
+		};
+
+		pinctrl_cspi1_cs: cspi1csgrp {
+			fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
+		};
+
+		pinctrl_cspi2: cspi2grp {
+			fsl,pins = <
+				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+			>;
+		};
+
+		pinctrl_cspi2_cs: cspi2csgrp {
+			fsl,pins = <
+				MX27_PAD_CSI_D5__GPIO2_17 0x0
+				MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
+				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
+		};
+
+		pinctrl_imxfb1: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_CLS__CLS 0x0
+				MX27_PAD_CONTRAST__CONTRAST 0x0
+				MX27_PAD_LD0__LD0 0x0
+				MX27_PAD_LD1__LD1 0x0
+				MX27_PAD_LD2__LD2 0x0
+				MX27_PAD_LD3__LD3 0x0
+				MX27_PAD_LD4__LD4 0x0
+				MX27_PAD_LD5__LD5 0x0
+				MX27_PAD_LD6__LD6 0x0
+				MX27_PAD_LD7__LD7 0x0
+				MX27_PAD_LD8__LD8 0x0
+				MX27_PAD_LD9__LD9 0x0
+				MX27_PAD_LD10__LD10 0x0
+				MX27_PAD_LD11__LD11 0x0
+				MX27_PAD_LD12__LD12 0x0
+				MX27_PAD_LD13__LD13 0x0
+				MX27_PAD_LD14__LD14 0x0
+				MX27_PAD_LD15__LD15 0x0
+				MX27_PAD_LD16__LD16 0x0
+				MX27_PAD_LD17__LD17 0x0
+				MX27_PAD_LSCLK__LSCLK 0x0
+				MX27_PAD_OE_ACD__OE_ACD 0x0
+				MX27_PAD_PS__PS 0x0
+				MX27_PAD_REV__REV 0x0
+				MX27_PAD_SPL_SPR__SPL_SPR 0x0
+				MX27_PAD_HSYNC__HSYNC 0x0
+				MX27_PAD_VSYNC__VSYNC 0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_pwm: pwmgrp {
+			fsl,pins = <
+				MX27_PAD_PWMO__PWMO 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+			>;
+		};
+
+		pinctrl_sdhc2_cd: sdhc2cdgrp {
+			fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
+		};
+	};
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2 &pinctrl_sdhc2_cd>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm>;
+};
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index 5ce89aa275df..4c317716b510 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -17,15 +17,181 @@
 	compatible = "fsl,imx27-pdk", "fsl,imx27";
 
 	memory {
-		reg = <0x0 0x0>;
+		reg = <0xa0000000 0x08000000>;
 	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usbphy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			clocks = <&clks 0>;
+			clock-names = "main_clk";
+		};
+	};
+};
+
+&cspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi2>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13783@0 {
+		compatible = "fsl,mc13783";
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+
+		regulators {
+			vgen_reg: vgen {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc1_reg: vmmc1 {
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			gpo1_reg: gpo1 {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			gpo3_reg: gpo3 {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-mode = "mii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&kpp {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_ENTER)
+		MATRIX_KEY(2, 0, KEY_F6)
+		MATRIX_KEY(2, 1, KEY_F8)
+		MATRIX_KEY(2, 2, KEY_F9)
+		MATRIX_KEY(2, 3, KEY_F10)
+	>;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
 };
 
 &uart1 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
-&fec {
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	fsl,usbphy = <&usbphy0>;
+	phy_type = "ulpi";
 	status = "okay";
 };
+
+&iomuxc {
+	imx27-pdk {
+		pinctrl_cspi2: cspi2grp {
+			fsl,pins = <
+				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+				MX27_PAD_CSPI2_SS0__GPIO4_21	0x0 /* SPI2 CS0 */
+				MX27_PAD_TOUT__GPIO3_14		0x0 /* PMIC IRQ */
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB	0x0
+				MX27_PAD_NFCLE__NFCLE	0x0
+				MX27_PAD_NFWP_B__NFWP_B	0x0
+				MX27_PAD_NFCE_B__NFCE_B	0x0
+				MX27_PAD_NFALE__NFALE	0x0
+				MX27_PAD_NFRE_B__NFRE_B	0x0
+				MX27_PAD_NFWE_B__NFWE_B	0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 5a31c776513f..7c869fe3c30b 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -9,12 +9,16 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "imx27-phytec-phycard-s-som.dts"
+#include "imx27-phytec-phycard-s-som.dtsi"
 
 / {
 	model = "Phytec pca100 rapid development kit";
 	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	display: display {
 		model = "Primeview-PD050VL1";
 		native-mode = <&timing0>;
@@ -37,9 +41,12 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3v3: 3v3 {
+		reg_3v3: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3V3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -54,6 +61,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
 	rtc@51 {
@@ -68,26 +77,92 @@
 	};
 };
 
+&iomuxc {
+	imx27-phycard-s-rdk {
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_owire1: owire1grp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+				MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD 0x0
+				MX27_PAD_UART2_RXD__UART2_RXD 0x0
+				MX27_PAD_UART2_CTS__UART2_CTS 0x0
+				MX27_PAD_UART2_RTS__UART2_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD 0x0
+				MX27_PAD_UART3_RXD__UART3_RXD 0x0
+				MX27_PAD_UART3_CTS__UART3_CTS 0x0
+				MX27_PAD_UART3_RTS__UART3_RTS 0x0
+			>;
+		};
+	};
+};
+
 &owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire1>;
 	status = "okay";
 };
 
 &sdhci2 {
-	cd-gpios = <&gpio3 29 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart1 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
 &uart3 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
deleted file mode 100644
index c8d57d1d0743..000000000000
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
- * and Markus Pargmann, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pca100";
-	compatible = "phytec,imx27-pca100", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x08000000>; /* 128MB */
-	};
-};
-
-&cspi1 {
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 28 0>,
-		<&gpio4 27 0>;
-	status = "okay";
-};
-
-&fec {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	at24@52 {
-		compatible = "at,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
new file mode 100644
index 000000000000..1b6248079682
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pca100";
+	compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x08000000>; /* 128MB */
+	};
+};
+
+&cspi1 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+&iomuxc {
+	imx27-phycard-s-som {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB 0x0
+				MX27_PAD_NFCLE__NFCLE 0x0
+				MX27_PAD_NFWP_B__NFWP_B 0x0
+				MX27_PAD_NFCE_B__NFCE_B 0x0
+				MX27_PAD_NFALE__NFALE 0x0
+				MX27_PAD_NFRE_B__NFRE_B 0x0
+				MX27_PAD_NFWE_B__NFWE_B 0x0
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 0fc6551786c6..fe02bc7a24fd 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -7,41 +7,315 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "imx27-phytec-phycore-som.dts"
+#include "imx27-phytec-phycore-som.dtsi"
 
 / {
 	model = "Phytec pcm970";
 	compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	display0: LQ035Q7 {
+		model = "Sharp-LQ035Q7";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xf00080c0>;
+
+		display-timings {
+			timing0: 240x320 {
+				clock-frequency = <5500000>;
+				hactive = <240>;
+				vactive = <320>;
+				hback-porch = <5>;
+				hsync-len = <7>;
+				hfront-porch = <16>;
+				vback-porch = <7>;
+				vsync-len = <1>;
+				vfront-porch = <9>;
+				pixelclk-active = <1>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <0>;
+			};
+		};
+	};
+
+	regulators {
+		regulator@2 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_csien>;
+			reg = <2>;
+			regulator-name = "CSI_EN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			regulator-always-on;
+		};
+	};
+
+	usbphy {
+		usbphy2: usbphy@2 {
+			compatible = "usb-nop-xceiv";
+			reg = <2>;
+			vcc-supply = <&reg_5v0>;
+			clocks = <&clks 0>;
+			clock-names = "main_clk";
+		};
+	};
 };
 
 &cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
 	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>;
+};
+
+&fb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb1>;
+	display = <&display0>;
+	lcd-supply = <&reg_5v0>;
+	fsl,dmacr = <0x00020010>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,lpccr = <0x00a903ff>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	camgpio: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	imx27_phycore_rdk {
+		pinctrl_csien: csiengrp {
+			fsl,pins = <
+				MX27_PAD_USB_OC_B__GPIO2_24 0x0
+			>;
+		};
+
+		pinctrl_cspi1cs1: cspi1cs1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+			>;
+		};
+
+		pinctrl_imxfb1: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_LD0__LD0 0x0
+				MX27_PAD_LD1__LD1 0x0
+				MX27_PAD_LD2__LD2 0x0
+				MX27_PAD_LD3__LD3 0x0
+				MX27_PAD_LD4__LD4 0x0
+				MX27_PAD_LD5__LD5 0x0
+				MX27_PAD_LD6__LD6 0x0
+				MX27_PAD_LD7__LD7 0x0
+				MX27_PAD_LD8__LD8 0x0
+				MX27_PAD_LD9__LD9 0x0
+				MX27_PAD_LD10__LD10 0x0
+				MX27_PAD_LD11__LD11 0x0
+				MX27_PAD_LD12__LD12 0x0
+				MX27_PAD_LD13__LD13 0x0
+				MX27_PAD_LD14__LD14 0x0
+				MX27_PAD_LD15__LD15 0x0
+				MX27_PAD_LD16__LD16 0x0
+				MX27_PAD_LD17__LD17 0x0
+				MX27_PAD_CLS__CLS 0x0
+				MX27_PAD_CONTRAST__CONTRAST 0x0
+				MX27_PAD_LSCLK__LSCLK 0x0
+				MX27_PAD_OE_ACD__OE_ACD 0x0
+				MX27_PAD_PS__PS 0x0
+				MX27_PAD_REV__REV 0x0
+				MX27_PAD_SPL_SPR__SPL_SPR 0x0
+				MX27_PAD_HSYNC__HSYNC 0x0
+				MX27_PAD_VSYNC__VSYNC 0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			/* Add pullup to DATA line */
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA	0x1
+				MX27_PAD_I2C_CLK__I2C_CLK	0x0
+			>;
+		};
+
+		pinctrl_owire1: owire1grp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+				MX27_PAD_SSI3_FS__GPIO3_28	0x0 /* WP */
+				MX27_PAD_SSI3_RXDAT__GPIO3_29	0x0 /* CD */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD 0x0
+				MX27_PAD_UART2_RXD__UART2_RXD 0x0
+				MX27_PAD_UART2_CTS__UART2_CTS 0x0
+				MX27_PAD_UART2_RTS__UART2_RTS 0x0
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
+				MX27_PAD_USBH2_STP__USBH2_STP 0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX27_PAD_CS4_B__CS4_B		0x0 /* CS4 */
+				MX27_PAD_SD1_D1__GPIO5_19	0x0 /* CAN IRQ */
+			>;
+		};
+	};
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire1>;
+	status = "okay";
+};
+
+&pmicleds {
+	ledr1: led@3 {
+		reg = <3>;
+		label = "system:red1:user";
+	};
+
+	ledg1: led@4 {
+		reg = <4>;
+		label = "system:green1:user";
+	};
+
+	ledb1: led@5 {
+		reg = <5>;
+		label = "system:blue1:user";
+	};
+
+	ledr2: led@6 {
+		reg = <6>;
+		label = "system:red2:user";
+	};
+
+	ledg2: led@7 {
+		reg = <7>;
+		label = "system:green2:user";
+	};
+
+	ledb2: led@8 {
+		reg = <8>;
+		label = "system:blue2:user";
+	};
+
+	ledr3: led@9 {
+		reg = <9>;
+		label = "system:red3:nand";
+		linux,default-trigger = "nand-disk";
+	};
+
+	ledg3: led@10 {
+		reg = <10>;
+		label = "system:green3:live";
+		linux,default-trigger = "heartbeat";
+	};
+
+	ledb3: led@11 {
+		reg = <11>;
+		label = "system:blue3:cpu";
+		linux,default-trigger = "cpu0";
+	};
 };
 
 &sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
 	bus-width = <4>;
-	cd-gpios = <&gpio3 29 0>;
-	wp-gpios = <&gpio3 28 0>;
+	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&vmmc1_reg>;
 	status = "okay";
 };
 
 &uart1 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
 };
 
 &uart2 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	vbus-supply = <&reg_5v0>;
+	fsl,usbphy = <&usbphy2>;
+	disable-over-current;
 	status = "okay";
 };
 
 &weim {
-	can@d4000000 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+
+	can@4,0 {
 		compatible = "nxp,sja1000";
 		reg = <4 0x00000000 0x00000100>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <19 0x2>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
 		nxp,external-clock-frequency = <16000000>;
 		nxp,tx-output-config = <0x16>;
 		nxp,no-comparator-bypass;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
deleted file mode 100644
index 4ec402c38945..000000000000
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pcm038";
-	compatible = "phytec,imx27-pcm038", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x08000000>;
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	/* SSI0 <=> PINS_4 (MC13783 Audio) */
-	ssi0 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <0xcb205000>;
-	};
-
-	pins4 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <0x00001000>;
-	};
-};
-
-&cspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 28 0>;
-	status = "okay";
-
-	pmic: mc13783@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,mc13783";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <23 0x4>;
-		fsl,mc13xxx-uses-adc;
-		fsl,mc13xxx-uses-rtc;
-
-		regulators {
-			/* SW1A and SW1B joined operation */
-			sw1_reg: sw1a {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1520000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* SW2A and SW2B joined operation */
-			sw2_reg: sw2a {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5000000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			violo_reg: violo {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			viohi_reg: viohi {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vgen_reg: vgen {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			vrf1_reg: vrf1 {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vrf2_reg: vrf2 {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vmmc1_reg: vmmc1 {
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			gpo1_reg: gpo1 { };
-
-			pwgt1spi_reg: pwgt1spi {
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&fec {
-	phy-reset-gpios = <&gpio3 30 0>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "at,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	lm75@4a {
-		compatible = "national,lm75";
-		reg = <0x4a>;
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	nor: nor@c0000000 {
-		compatible = "cfi-flash";
-		reg = <0 0x00000000 0x02000000>;
-		bank-width = <2>;
-		linux,mtd-name = "physmap-flash.0";
-		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	sram: sram@c8000000 {
-		compatible = "mtd-ram";
-		reg = <1 0x00000000 0x00800000>;
-		bank-width = <2>;
-		linux,mtd-name = "mtd-ram.0";
-		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
new file mode 100644
index 000000000000..31e9f7049f73
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -0,0 +1,350 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pcm038";
+	compatible = "phytec,imx27-pcm038", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x08000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		reg_5v0: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "5V0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usbphy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			vcc-supply = <&sw3_reg>;
+			clocks = <&clks 0>;
+			clock-names = "main_clk";
+		};
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	/* SSI0 <=> PINS_4 (MC13783 Audio) */
+	ssi0 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <0xcb205000>;
+	};
+
+	pins4 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <0x00001000>;
+	};
+};
+
+&cspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13783@0 {
+		compatible = "fsl,mc13783";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		pmicleds: leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x001 0x000 0x000 0x000 0x000 0x000>;
+		};
+
+		regulators {
+			/* SW1A and SW1B joined operation */
+			sw1_reg: sw1a {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1520000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* SW2A and SW2B joined operation */
+			sw2_reg: sw2a {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			violo_reg: violo {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			viohi_reg: viohi {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen_reg: vgen {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vrf1_reg: vrf1 {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vrf2_reg: vrf2 {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc1_reg: vmmc1 {
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			gpo1_reg: gpo1 { };
+
+			pwgt1spi_reg: pwgt1spi {
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	lm75@4a {
+		compatible = "national,lm75";
+		reg = <0x4a>;
+	};
+};
+
+&iomuxc {
+	imx27_phycore_som {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* SPI1 CS0 */
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+				MX27_PAD_SSI3_TXDAT__GPIO3_30	0x0 /* FEC RST */
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB 0x0
+				MX27_PAD_NFCLE__NFCLE 0x0
+				MX27_PAD_NFWP_B__NFWP_B 0x0
+				MX27_PAD_NFCE_B__NFCE_B 0x0
+				MX27_PAD_NFALE__NFALE 0x0
+				MX27_PAD_NFRE_B__NFRE_B 0x0
+				MX27_PAD_NFWE_B__NFWE_B 0x0
+			>;
+		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX27_PAD_USB_PWR__GPIO2_23	0x0 /* PMIC IRQ */
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX27_PAD_SSI1_FS__SSI1_FS 0x0
+				MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
+				MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
+				MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	phy_type = "ulpi";
+	fsl,usbphy = <&usbphy0>;
+	vbus-supply = <&sw3_reg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	sram: sram@1,0 {
+		compatible = "mtd-ram";
+		reg = <1 0x00000000 0x00800000>;
+		bank-width = <2>;
+		linux,mtd-name = "mtd-ram.0";
+		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/imx27-pinfunc.h
new file mode 100644
index 000000000000..f5387b4de577
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-pinfunc.h
@@ -0,0 +1,526 @@
+/*
+ * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_IMX27_PINFUNC_H
+#define __DTS_IMX27_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <pin mux_id>
+ * mux_id consists of
+ * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ *
+ * function:      0 - Primary function
+ *                1 - Alternate function
+ *                2 - GPIO
+ * direction:     0 - Input
+ *                1 - Output
+ * gpio_oconf:    0 - A_IN
+ *                1 - B_IN
+ *                2 - C_IN
+ *                3 - Data Register
+ * gpio_iconfa/b: 0 - GPIO_IN
+ *                1 - Interrupt Status Register
+ *                2 - 0
+ *                3 - 1
+ *
+ * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+ * number on the specific port (between 0 and 31).
+ */
+
+#define MX27_PAD_USBH2_CLK__USBH2_CLK                      0x00 0x000
+#define MX27_PAD_USBH2_CLK__GPIO1_0                        0x00 0x032
+#define MX27_PAD_USBH2_DIR__USBH2_DIR                      0x01 0x000
+#define MX27_PAD_USBH2_DIR__GPIO1_1                        0x01 0x032
+#define MX27_PAD_USBH2_DATA7__USBH2_DATA7                  0x02 0x004
+#define MX27_PAD_USBH2_DATA7__GPIO1_2                      0x02 0x032
+#define MX27_PAD_USBH2_NXT__USBH2_NXT                      0x03 0x000
+#define MX27_PAD_USBH2_NXT__GPIO1_3                        0x03 0x032
+#define MX27_PAD_USBH2_STP__USBH2_STP                      0x04 0x004
+#define MX27_PAD_USBH2_STP__GPIO1_4                        0x04 0x032
+#define MX27_PAD_LSCLK__LSCLK                              0x05 0x004
+#define MX27_PAD_LSCLK__GPIO1_5                            0x05 0x032
+#define MX27_PAD_LD0__LD0                                  0x06 0x004
+#define MX27_PAD_LD0__GPIO1_6                              0x06 0x032
+#define MX27_PAD_LD1__LD1                                  0x07 0x004
+#define MX27_PAD_LD1__GPIO1_7                              0x07 0x032
+#define MX27_PAD_LD2__LD2                                  0x08 0x004
+#define MX27_PAD_LD2__GPIO1_8                              0x08 0x032
+#define MX27_PAD_LD3__LD3                                  0x09 0x004
+#define MX27_PAD_LD3__GPIO1_9                              0x09 0x032
+#define MX27_PAD_LD4__LD4                                  0x0a 0x004
+#define MX27_PAD_LD4__GPIO1_10                             0x0a 0x032
+#define MX27_PAD_LD5__LD5                                  0x0b 0x004
+#define MX27_PAD_LD5__GPIO1_11                             0x0b 0x032
+#define MX27_PAD_LD6__LD6                                  0x0c 0x004
+#define MX27_PAD_LD6__GPIO1_12                             0x0c 0x032
+#define MX27_PAD_LD7__LD7                                  0x0d 0x004
+#define MX27_PAD_LD7__GPIO1_13                             0x0d 0x032
+#define MX27_PAD_LD8__LD8                                  0x0e 0x004
+#define MX27_PAD_LD8__GPIO1_14                             0x0e 0x032
+#define MX27_PAD_LD9__LD9                                  0x0f 0x004
+#define MX27_PAD_LD9__GPIO1_15                             0x0f 0x032
+#define MX27_PAD_LD10__LD10                                0x10 0x004
+#define MX27_PAD_LD10__GPIO1_16                            0x10 0x032
+#define MX27_PAD_LD11__LD11                                0x11 0x004
+#define MX27_PAD_LD11__GPIO1_17                            0x11 0x032
+#define MX27_PAD_LD12__LD12                                0x12 0x004
+#define MX27_PAD_LD12__GPIO1_18                            0x12 0x032
+#define MX27_PAD_LD13__LD13                                0x13 0x004
+#define MX27_PAD_LD13__GPIO1_19                            0x13 0x032
+#define MX27_PAD_LD14__LD14                                0x14 0x004
+#define MX27_PAD_LD14__GPIO1_20                            0x14 0x032
+#define MX27_PAD_LD15__LD15                                0x15 0x004
+#define MX27_PAD_LD15__GPIO1_21                            0x15 0x032
+#define MX27_PAD_LD16__LD16                                0x16 0x004
+#define MX27_PAD_LD16__GPIO1_22                            0x16 0x032
+#define MX27_PAD_LD17__LD17                                0x17 0x004
+#define MX27_PAD_LD17__GPIO1_23                            0x17 0x032
+#define MX27_PAD_REV__REV                                  0x18 0x004
+#define MX27_PAD_REV__GPIO1_24                             0x18 0x032
+#define MX27_PAD_CLS__CLS                                  0x19 0x004
+#define MX27_PAD_CLS__GPIO1_25                             0x19 0x032
+#define MX27_PAD_PS__PS                                    0x1a 0x004
+#define MX27_PAD_PS__GPIO1_26                              0x1a 0x032
+#define MX27_PAD_SPL_SPR__SPL_SPR                          0x1b 0x004
+#define MX27_PAD_SPL_SPR__GPIO1_27                         0x1b 0x032
+#define MX27_PAD_HSYNC__HSYNC                              0x1c 0x004
+#define MX27_PAD_HSYNC__GPIO1_28                           0x1c 0x032
+#define MX27_PAD_VSYNC__VSYNC                              0x1d 0x004
+#define MX27_PAD_VSYNC__GPIO1_29                           0x1d 0x032
+#define MX27_PAD_CONTRAST__CONTRAST                        0x1e 0x004
+#define MX27_PAD_CONTRAST__GPIO1_30                        0x1e 0x032
+#define MX27_PAD_OE_ACD__OE_ACD                            0x1f 0x004
+#define MX27_PAD_OE_ACD__GPIO1_31                          0x1f 0x032
+#define MX27_PAD_UNUSED0__UNUSED0                          0x20 0x004
+#define MX27_PAD_UNUSED0__GPIO2_0                          0x20 0x032
+#define MX27_PAD_UNUSED1__UNUSED1                          0x21 0x004
+#define MX27_PAD_UNUSED1__GPIO2_1                          0x21 0x032
+#define MX27_PAD_UNUSED2__UNUSED2                          0x22 0x004
+#define MX27_PAD_UNUSED2__GPIO2_2                          0x22 0x032
+#define MX27_PAD_UNUSED3__UNUSED3                          0x23 0x004
+#define MX27_PAD_UNUSED3__GPIO2_3                          0x23 0x032
+#define MX27_PAD_SD2_D0__SD2_D0                            0x24 0x004
+#define MX27_PAD_SD2_D0__MSHC_DATA0                        0x24 0x005
+#define MX27_PAD_SD2_D0__GPIO2_4                           0x24 0x032
+#define MX27_PAD_SD2_D1__SD2_D1                            0x25 0x004
+#define MX27_PAD_SD2_D1__MSHC_DATA1                        0x25 0x005
+#define MX27_PAD_SD2_D1__GPIO2_5                           0x25 0x032
+#define MX27_PAD_SD2_D2__SD2_D2                            0x26 0x004
+#define MX27_PAD_SD2_D2__MSHC_DATA2                        0x26 0x005
+#define MX27_PAD_SD2_D2__GPIO2_6                           0x26 0x032
+#define MX27_PAD_SD2_D3__SD2_D3                            0x27 0x004
+#define MX27_PAD_SD2_D3__MSHC_DATA3                        0x27 0x005
+#define MX27_PAD_SD2_D3__GPIO2_7                           0x27 0x032
+#define MX27_PAD_SD2_CMD__SD2_CMD                          0x28 0x004
+#define MX27_PAD_SD2_CMD__MSHC_BS                          0x28 0x005
+#define MX27_PAD_SD2_CMD__GPIO2_8                          0x28 0x032
+#define MX27_PAD_SD2_CLK__SD2_CLK                          0x29 0x004
+#define MX27_PAD_SD2_CLK__MSHC_SCLK                        0x29 0x005
+#define MX27_PAD_SD2_CLK__GPIO2_9                          0x29 0x032
+#define MX27_PAD_CSI_D0__CSI_D0                            0x2a 0x000
+#define MX27_PAD_CSI_D0__UART6_TXD                         0x2a 0x005
+#define MX27_PAD_CSI_D0__GPIO2_10                          0x2a 0x032
+#define MX27_PAD_CSI_D1__CSI_D1                            0x2b 0x000
+#define MX27_PAD_CSI_D1__UART6_RXD                         0x2b 0x001
+#define MX27_PAD_CSI_D1__GPIO2_11                          0x2b 0x032
+#define MX27_PAD_CSI_D2__CSI_D2                            0x2c 0x000
+#define MX27_PAD_CSI_D2__UART6_CTS                         0x2c 0x005
+#define MX27_PAD_CSI_D2__GPIO2_12                          0x2c 0x032
+#define MX27_PAD_CSI_D3__CSI_D3                            0x2d 0x000
+#define MX27_PAD_CSI_D3__UART6_RTS                         0x2d 0x001
+#define MX27_PAD_CSI_D3__GPIO2_13                          0x2d 0x032
+#define MX27_PAD_CSI_D4__CSI_D4                            0x2e 0x000
+#define MX27_PAD_CSI_D4__GPIO2_14                          0x2e 0x032
+#define MX27_PAD_CSI_MCLK__CSI_MCLK                        0x2f 0x004
+#define MX27_PAD_CSI_MCLK__GPIO2_15                        0x2f 0x032
+#define MX27_PAD_CSI_PIXCLK__CSI_PIXCLK                    0x30 0x000
+#define MX27_PAD_CSI_PIXCLK__GPIO2_16                      0x30 0x032
+#define MX27_PAD_CSI_D5__CSI_D5                            0x31 0x000
+#define MX27_PAD_CSI_D5__GPIO2_17                          0x31 0x032
+#define MX27_PAD_CSI_D6__CSI_D6                            0x32 0x000
+#define MX27_PAD_CSI_D6__UART5_TXD                         0x32 0x005
+#define MX27_PAD_CSI_D6__GPIO2_18                          0x32 0x032
+#define MX27_PAD_CSI_D7__CSI_D7                            0x33 0x000
+#define MX27_PAD_CSI_D7__UART5_RXD                         0x33 0x001
+#define MX27_PAD_CSI_D7__GPIO2_19                          0x33 0x032
+#define MX27_PAD_CSI_VSYNC__CSI_VSYNC                      0x34 0x000
+#define MX27_PAD_CSI_VSYNC__UART5_CTS                      0x34 0x005
+#define MX27_PAD_CSI_VSYNC__GPIO2_20                       0x34 0x032
+#define MX27_PAD_CSI_HSYNC__CSI_HSYNC                      0x35 0x000
+#define MX27_PAD_CSI_HSYNC__UART5_RTS                      0x35 0x001
+#define MX27_PAD_CSI_HSYNC__GPIO2_21                       0x35 0x032
+#define MX27_PAD_USBH1_SUSP__USBH1_SUSP                    0x36 0x004
+#define MX27_PAD_USBH1_SUSP__GPIO2_22                      0x36 0x032
+#define MX27_PAD_USB_PWR__USB_PWR                          0x37 0x004
+#define MX27_PAD_USB_PWR__GPIO2_23                         0x37 0x032
+#define MX27_PAD_USB_OC_B__USB_OC_B                        0x38 0x000
+#define MX27_PAD_USB_OC_B__GPIO2_24                        0x38 0x032
+#define MX27_PAD_USBH1_RCV__USBH1_RCV                      0x39 0x004
+#define MX27_PAD_USBH1_RCV__GPIO2_25                       0x39 0x032
+#define MX27_PAD_USBH1_FS__USBH1_FS                        0x3a 0x004
+#define MX27_PAD_USBH1_FS__UART4_RTS                       0x3a 0x001
+#define MX27_PAD_USBH1_FS__GPIO2_26                        0x3a 0x032
+#define MX27_PAD_USBH1_OE_B__USBH1_OE_B                    0x3b 0x004
+#define MX27_PAD_USBH1_OE_B__GPIO2_27                      0x3b 0x032
+#define MX27_PAD_USBH1_TXDM__USBH1_TXDM                    0x3c 0x004
+#define MX27_PAD_USBH1_TXDM__UART4_TXD                     0x3c 0x005
+#define MX27_PAD_USBH1_TXDM__GPIO2_28                      0x3c 0x032
+#define MX27_PAD_USBH1_TXDP__USBH1_TXDP                    0x3d 0x004
+#define MX27_PAD_USBH1_TXDP__UART4_CTS                     0x3d 0x005
+#define MX27_PAD_USBH1_TXDP__GPIO2_29                      0x3d 0x032
+#define MX27_PAD_USBH1_RXDM__USBH1_RXDM                    0x3e 0x004
+#define MX27_PAD_USBH1_RXDM__GPIO2_30                      0x3e 0x032
+#define MX27_PAD_USBH1_RXDP__USBH1_RXDP                    0x3f 0x004
+#define MX27_PAD_USBH1_RXDP__UART4_RXD                     0x3f 0x001
+#define MX27_PAD_USBH1_RXDP__GPIO2_31                      0x3f 0x032
+#define MX27_PAD_UNUSED4__UNUSED4                          0x40 0x004
+#define MX27_PAD_UNUSED4__GPIO3_0                          0x40 0x032
+#define MX27_PAD_UNUSED5__UNUSED5                          0x41 0x004
+#define MX27_PAD_UNUSED5__GPIO3_1                          0x41 0x032
+#define MX27_PAD_UNUSED6__UNUSED6                          0x42 0x004
+#define MX27_PAD_UNUSED6__GPIO3_2                          0x42 0x032
+#define MX27_PAD_UNUSED7__UNUSED7                          0x43 0x004
+#define MX27_PAD_UNUSED7__GPIO3_3                          0x43 0x032
+#define MX27_PAD_UNUSED8__UNUSED8                          0x44 0x004
+#define MX27_PAD_UNUSED8__GPIO3_4                          0x44 0x032
+#define MX27_PAD_I2C2_SDA__I2C2_SDA                        0x45 0x004
+#define MX27_PAD_I2C2_SDA__GPIO3_5                         0x45 0x032
+#define MX27_PAD_I2C2_SCL__I2C2_SCL                        0x46 0x004
+#define MX27_PAD_I2C2_SCL__GPIO3_6                         0x46 0x032
+#define MX27_PAD_USBOTG_DATA5__USBOTG_DATA5                0x47 0x004
+#define MX27_PAD_USBOTG_DATA5__GPIO3_7                     0x47 0x032
+#define MX27_PAD_USBOTG_DATA6__USBOTG_DATA6                0x48 0x004
+#define MX27_PAD_USBOTG_DATA6__GPIO3_8                     0x48 0x032
+#define MX27_PAD_USBOTG_DATA0__USBOTG_DATA0                0x49 0x004
+#define MX27_PAD_USBOTG_DATA0__GPIO3_9                     0x49 0x032
+#define MX27_PAD_USBOTG_DATA2__USBOTG_DATA2                0x4a 0x004
+#define MX27_PAD_USBOTG_DATA2__GPIO3_10                    0x4a 0x032
+#define MX27_PAD_USBOTG_DATA1__USBOTG_DATA1                0x4b 0x004
+#define MX27_PAD_USBOTG_DATA1__GPIO3_11                    0x4b 0x032
+#define MX27_PAD_USBOTG_DATA4__USBOTG_DATA4                0x4c 0x004
+#define MX27_PAD_USBOTG_DATA4__GPIO3_12                    0x4c 0x032
+#define MX27_PAD_USBOTG_DATA3__USBOTG_DATA3                0x4d 0x004
+#define MX27_PAD_USBOTG_DATA3__GPIO3_13                    0x4d 0x032
+#define MX27_PAD_TOUT__TOUT                                0x4e 0x004
+#define MX27_PAD_TOUT__GPIO3_14                            0x4e 0x032
+#define MX27_PAD_TIN__TIN                                  0x4f 0x000
+#define MX27_PAD_TIN__GPIO3_15                             0x4f 0x032
+#define MX27_PAD_SSI4_FS__SSI4_FS                          0x50 0x004
+#define MX27_PAD_SSI4_FS__GPIO3_16                         0x50 0x032
+#define MX27_PAD_SSI4_RXDAT__SSI4_RXDAT                    0x51 0x004
+#define MX27_PAD_SSI4_RXDAT__GPIO3_17                      0x51 0x032
+#define MX27_PAD_SSI4_TXDAT__SSI4_TXDAT                    0x52 0x004
+#define MX27_PAD_SSI4_TXDAT__GPIO3_18                      0x52 0x032
+#define MX27_PAD_SSI4_CLK__SSI4_CLK                        0x53 0x004
+#define MX27_PAD_SSI4_CLK__GPIO3_19                        0x53 0x032
+#define MX27_PAD_SSI1_FS__SSI1_FS                          0x54 0x004
+#define MX27_PAD_SSI1_FS__GPIO3_20                         0x54 0x032
+#define MX27_PAD_SSI1_RXDAT__SSI1_RXDAT                    0x55 0x004
+#define MX27_PAD_SSI1_RXDAT__GPIO3_21                      0x55 0x032
+#define MX27_PAD_SSI1_TXDAT__SSI1_TXDAT                    0x56 0x004
+#define MX27_PAD_SSI1_TXDAT__GPIO3_22                      0x56 0x032
+#define MX27_PAD_SSI1_CLK__SSI1_CLK                        0x57 0x004
+#define MX27_PAD_SSI1_CLK__GPIO3_23                        0x57 0x032
+#define MX27_PAD_SSI2_FS__SSI2_FS                          0x58 0x004
+#define MX27_PAD_SSI2_FS__GPT5_TOUT                        0x58 0x005
+#define MX27_PAD_SSI2_FS__GPIO3_24                         0x58 0x032
+#define MX27_PAD_SSI2_RXDAT__SSI2_RXDAT                    0x59 0x004
+#define MX27_PAD_SSI2_RXDAT__GPTS_TIN                      0x59 0x001
+#define MX27_PAD_SSI2_RXDAT__GPIO3_25                      0x59 0x032
+#define MX27_PAD_SSI2_TXDAT__SSI2_TXDAT                    0x5a 0x004
+#define MX27_PAD_SSI2_TXDAT__GPT4_TOUT                     0x5a 0x005
+#define MX27_PAD_SSI2_TXDAT__GPIO3_26                      0x5a 0x032
+#define MX27_PAD_SSI2_CLK__SSI2_CLK                        0x5b 0x004
+#define MX27_PAD_SSI2_CLK__GPT4_TIN                        0x5b 0x001
+#define MX27_PAD_SSI2_CLK__GPIO3_27                        0x5b 0x032
+#define MX27_PAD_SSI3_FS__SSI3_FS                          0x5c 0x004
+#define MX27_PAD_SSI3_FS__SLCDC2_D0                        0x5c 0x001
+#define MX27_PAD_SSI3_FS__GPIO3_28                         0x5c 0x032
+#define MX27_PAD_SSI3_RXDAT__SSI3_RXDAT                    0x5d 0x004
+#define MX27_PAD_SSI3_RXDAT__SLCDC2_RS                     0x5d 0x001
+#define MX27_PAD_SSI3_RXDAT__GPIO3_29                      0x5d 0x032
+#define MX27_PAD_SSI3_TXDAT__SSI3_TXDAT                    0x5e 0x004
+#define MX27_PAD_SSI3_TXDAT__SLCDC2_CS                     0x5e 0x001
+#define MX27_PAD_SSI3_TXDAT__GPIO3_30                      0x5e 0x032
+#define MX27_PAD_SSI3_CLK__SSI3_CLK                        0x5f 0x004
+#define MX27_PAD_SSI3_CLK__SLCDC2_CLK                      0x5f 0x001
+#define MX27_PAD_SSI3_CLK__GPIO3_31                        0x5f 0x032
+#define MX27_PAD_SD3_CMD__SD3_CMD                          0x60 0x004
+#define MX27_PAD_SD3_CMD__FEC_TXD0                         0x60 0x006
+#define MX27_PAD_SD3_CMD__GPIO4_0                          0x60 0x032
+#define MX27_PAD_SD3_CLK__SD3_CLK                          0x61 0x004
+#define MX27_PAD_SD3_CLK__ETMTRACEPKT15                    0x61 0x005
+#define MX27_PAD_SD3_CLK__FEC_TXD1                         0x61 0x006
+#define MX27_PAD_SD3_CLK__GPIO4_1                          0x61 0x032
+#define MX27_PAD_ATA_DATA0__ATA_DATA0                      0x62 0x004
+#define MX27_PAD_ATA_DATA0__SD3_D0                         0x62 0x005
+#define MX27_PAD_ATA_DATA0__FEC_TXD2                       0x62 0x006
+#define MX27_PAD_ATA_DATA0__GPIO4_2                        0x62 0x032
+#define MX27_PAD_ATA_DATA1__ATA_DATA1                      0x63 0x004
+#define MX27_PAD_ATA_DATA1__SD3_D1                         0x63 0x005
+#define MX27_PAD_ATA_DATA1__FEC_TXD3                       0x63 0x006
+#define MX27_PAD_ATA_DATA1__GPIO4_3                        0x63 0x032
+#define MX27_PAD_ATA_DATA2__ATA_DATA2                      0x64 0x004
+#define MX27_PAD_ATA_DATA2__SD3_D2                         0x64 0x005
+#define MX27_PAD_ATA_DATA2__FEC_RX_ER                      0x64 0x002
+#define MX27_PAD_ATA_DATA2__GPIO4_4                        0x64 0x032
+#define MX27_PAD_ATA_DATA3__ATA_DATA3                      0x65 0x004
+#define MX27_PAD_ATA_DATA3__SD3_D3                         0x65 0x005
+#define MX27_PAD_ATA_DATA3__FEC_RXD1                       0x65 0x002
+#define MX27_PAD_ATA_DATA3__GPIO4_5                        0x65 0x032
+#define MX27_PAD_ATA_DATA4__ATA_DATA4                      0x66 0x004
+#define MX27_PAD_ATA_DATA4__ETMTRACEPKT14                  0x66 0x005
+#define MX27_PAD_ATA_DATA4__FEC_RXD2                       0x66 0x002
+#define MX27_PAD_ATA_DATA4__GPIO4_6                        0x66 0x032
+#define MX27_PAD_ATA_DATA5__ATA_DATA5                      0x67 0x004
+#define MX27_PAD_ATA_DATA5__ETMTRACEPKT13                  0x67 0x005
+#define MX27_PAD_ATA_DATA5__FEC_RXD3                       0x67 0x002
+#define MX27_PAD_ATA_DATA5__GPIO4_7                        0x67 0x032
+#define MX27_PAD_ATA_DATA6__ATA_DATA6                      0x68 0x004
+#define MX27_PAD_ATA_DATA6__FEC_MDIO                       0x68 0x005
+#define MX27_PAD_ATA_DATA6__GPIO4_8                        0x68 0x032
+#define MX27_PAD_ATA_DATA7__ATA_DATA7                      0x69 0x004
+#define MX27_PAD_ATA_DATA7__ETMTRACEPKT12                  0x69 0x005
+#define MX27_PAD_ATA_DATA7__FEC_MDC                        0x69 0x006
+#define MX27_PAD_ATA_DATA7__GPIO4_9                        0x69 0x032
+#define MX27_PAD_ATA_DATA8__ATA_DATA8                      0x6a 0x004
+#define MX27_PAD_ATA_DATA8__ETMTRACEPKT11                  0x6a 0x005
+#define MX27_PAD_ATA_DATA8__FEC_CRS                        0x6a 0x002
+#define MX27_PAD_ATA_DATA8__GPIO4_10                       0x6a 0x032
+#define MX27_PAD_ATA_DATA9__ATA_DATA9                      0x6b 0x004
+#define MX27_PAD_ATA_DATA9__ETMTRACEPKT10                  0x6b 0x005
+#define MX27_PAD_ATA_DATA9__FEC_TX_CLK                     0x6b 0x002
+#define MX27_PAD_ATA_DATA9__GPIO4_11                       0x6b 0x032
+#define MX27_PAD_ATA_DATA10__ATA_DATA10                    0x6c 0x004
+#define MX27_PAD_ATA_DATA10__ETMTRACEPKT9                  0x6c 0x005
+#define MX27_PAD_ATA_DATA10__FEC_RXD0                      0x6c 0x002
+#define MX27_PAD_ATA_DATA10__GPIO4_12                      0x6c 0x032
+#define MX27_PAD_ATA_DATA11__ATA_DATA11                    0x6d 0x004
+#define MX27_PAD_ATA_DATA11__ETMTRACEPKT8                  0x6d 0x005
+#define MX27_PAD_ATA_DATA11__FEC_RX_DV                     0x6d 0x002
+#define MX27_PAD_ATA_DATA11__GPIO4_13                      0x6d 0x032
+#define MX27_PAD_ATA_DATA12__ATA_DATA12                    0x6e 0x004
+#define MX27_PAD_ATA_DATA12__ETMTRACEPKT7                  0x6e 0x005
+#define MX27_PAD_ATA_DATA12__FEC_RX_CLK                    0x6e 0x002
+#define MX27_PAD_ATA_DATA12__GPIO4_14                      0x6e 0x032
+#define MX27_PAD_ATA_DATA13__ATA_DATA13                    0x6f 0x004
+#define MX27_PAD_ATA_DATA13__ETMTRACEPKT6                  0x6f 0x005
+#define MX27_PAD_ATA_DATA13__FEC_COL                       0x6f 0x002
+#define MX27_PAD_ATA_DATA13__GPIO4_15                      0x6f 0x032
+#define MX27_PAD_ATA_DATA14__ATA_DATA14                    0x70 0x004
+#define MX27_PAD_ATA_DATA14__ETMTRACEPKT5                  0x70 0x005
+#define MX27_PAD_ATA_DATA14__FEC_TX_ER                     0x70 0x006
+#define MX27_PAD_ATA_DATA14__GPIO4_16                      0x70 0x032
+#define MX27_PAD_I2C_DATA__I2C_DATA                        0x71 0x004
+#define MX27_PAD_I2C_DATA__GPIO4_17                        0x71 0x032
+#define MX27_PAD_I2C_CLK__I2C_CLK                          0x72 0x004
+#define MX27_PAD_I2C_CLK__GPIO4_18                         0x72 0x032
+#define MX27_PAD_CSPI2_SS2__CSPI2_SS2                      0x73 0x004
+#define MX27_PAD_CSPI2_SS2__USBH2_DATA4                    0x73 0x005
+#define MX27_PAD_CSPI2_SS2__GPIO4_19                       0x73 0x032
+#define MX27_PAD_CSPI2_SS1__CSPI2_SS1                      0x74 0x004
+#define MX27_PAD_CSPI2_SS1__USBH2_DATA3                    0x74 0x005
+#define MX27_PAD_CSPI2_SS1__GPIO4_20                       0x74 0x032
+#define MX27_PAD_CSPI2_SS0__CSPI2_SS0                      0x75 0x004
+#define MX27_PAD_CSPI2_SS0__USBH2_DATA6                    0x75 0x005
+#define MX27_PAD_CSPI2_SS0__GPIO4_21                       0x75 0x032
+#define MX27_PAD_CSPI2_SCLK__CSPI2_SCLK                    0x76 0x004
+#define MX27_PAD_CSPI2_SCLK__USBH2_DATA0                   0x76 0x005
+#define MX27_PAD_CSPI2_SCLK__GPIO4_22                      0x76 0x032
+#define MX27_PAD_CSPI2_MISO__CSPI2_MISO                    0x77 0x004
+#define MX27_PAD_CSPI2_MISO__USBH2_DATA2                   0x77 0x005
+#define MX27_PAD_CSPI2_MISO__GPIO4_23                      0x77 0x032
+#define MX27_PAD_CSPI2_MOSI__CSPI2_MOSI                    0x78 0x004
+#define MX27_PAD_CSPI2_MOSI__USBH2_DATA1                   0x78 0x005
+#define MX27_PAD_CSPI2_MOSI__GPIO4_24                      0x78 0x032
+#define MX27_PAD_CSPI1_RDY__CSPI1_RDY                      0x79 0x000
+#define MX27_PAD_CSPI1_RDY__GPIO4_25                       0x79 0x032
+#define MX27_PAD_CSPI1_SS2__CSPI1_SS2                      0x7a 0x004
+#define MX27_PAD_CSPI1_SS2__USBH2_DATA5                    0x7a 0x005
+#define MX27_PAD_CSPI1_SS2__GPIO4_26                       0x7a 0x032
+#define MX27_PAD_CSPI1_SS1__CSPI1_SS1                      0x7b 0x004
+#define MX27_PAD_CSPI1_SS1__GPIO4_27                       0x7b 0x032
+#define MX27_PAD_CSPI1_SS0__CSPI1_SS0                      0x7c 0x004
+#define MX27_PAD_CSPI1_SS0__GPIO4_28                       0x7c 0x032
+#define MX27_PAD_CSPI1_SCLK__CSPI1_SCLK                    0x7d 0x004
+#define MX27_PAD_CSPI1_SCLK__GPIO4_29                      0x7d 0x032
+#define MX27_PAD_CSPI1_MISO__CSPI1_MISO                    0x7e 0x004
+#define MX27_PAD_CSPI1_MISO__GPIO4_30                      0x7e 0x032
+#define MX27_PAD_CSPI1_MOSI__CSPI1_MOSI                    0x7f 0x004
+#define MX27_PAD_CSPI1_MOSI__GPIO4_31                      0x7f 0x032
+#define MX27_PAD_USBOTG_NXT__USBOTG_NXT                    0x80 0x000
+#define MX27_PAD_USBOTG_NXT__KP_COL6A                      0x80 0x005
+#define MX27_PAD_USBOTG_NXT__GPIO5_0                       0x80 0x032
+#define MX27_PAD_USBOTG_STP__USBOTG_STP                    0x81 0x004
+#define MX27_PAD_USBOTG_STP__KP_ROW6A                      0x81 0x005
+#define MX27_PAD_USBOTG_STP__GPIO5_1                       0x81 0x032
+#define MX27_PAD_USBOTG_DIR__USBOTG_DIR                    0x82 0x000
+#define MX27_PAD_USBOTG_DIR__KP_ROW7A                      0x82 0x005
+#define MX27_PAD_USBOTG_DIR__GPIO5_2                       0x82 0x032
+#define MX27_PAD_UART2_CTS__UART2_CTS                      0x83 0x004
+#define MX27_PAD_UART2_CTS__KP_COL7                        0x83 0x005
+#define MX27_PAD_UART2_CTS__GPIO5_3                        0x83 0x032
+#define MX27_PAD_UART2_RTS__UART2_RTS                      0x84 0x000
+#define MX27_PAD_UART2_RTS__KP_ROW7                        0x84 0x005
+#define MX27_PAD_UART2_RTS__GPIO5_4                        0x84 0x032
+#define MX27_PAD_PWMO__PWMO                                0x85 0x004
+#define MX27_PAD_PWMO__GPIO5_5                             0x85 0x032
+#define MX27_PAD_UART2_TXD__UART2_TXD                      0x86 0x004
+#define MX27_PAD_UART2_TXD__KP_COL6                        0x86 0x005
+#define MX27_PAD_UART2_TXD__GPIO5_6                        0x86 0x032
+#define MX27_PAD_UART2_RXD__UART2_RXD                      0x87 0x000
+#define MX27_PAD_UART2_RXD__KP_ROW6                        0x87 0x005
+#define MX27_PAD_UART2_RXD__GPIO5_7                        0x87 0x032
+#define MX27_PAD_UART3_TXD__UART3_TXD                      0x88 0x004
+#define MX27_PAD_UART3_TXD__GPIO5_8                        0x88 0x032
+#define MX27_PAD_UART3_RXD__UART3_RXD                      0x89 0x000
+#define MX27_PAD_UART3_RXD__GPIO5_9                        0x89 0x032
+#define MX27_PAD_UART3_CTS__UART3_CTS                      0x8a 0x004
+#define MX27_PAD_UART3_CTS__GPIO5_10                       0x8a 0x032
+#define MX27_PAD_UART3_RTS__UART3_RTS                      0x8b 0x000
+#define MX27_PAD_UART3_RTS__GPIO5_11                       0x8b 0x032
+#define MX27_PAD_UART1_TXD__UART1_TXD                      0x8c 0x004
+#define MX27_PAD_UART1_TXD__GPIO5_12                       0x8c 0x032
+#define MX27_PAD_UART1_RXD__UART1_RXD                      0x8d 0x000
+#define MX27_PAD_UART1_RXD__GPIO5_13                       0x8d 0x032
+#define MX27_PAD_UART1_CTS__UART1_CTS                      0x8e 0x004
+#define MX27_PAD_UART1_CTS__GPIO5_14                       0x8e 0x032
+#define MX27_PAD_UART1_RTS__UART1_RTS                      0x8f 0x000
+#define MX27_PAD_UART1_RTS__GPIO5_15                       0x8f 0x032
+#define MX27_PAD_RTCK__RTCK                                0x90 0x004
+#define MX27_PAD_RTCK__OWIRE                               0x90 0x005
+#define MX27_PAD_RTCK__GPIO5_16                            0x90 0x032
+#define MX27_PAD_RESET_OUT_B__RESET_OUT_B                  0x91 0x004
+#define MX27_PAD_RESET_OUT_B__GPIO5_17                     0x91 0x032
+#define MX27_PAD_SD1_D0__SD1_D0                            0x92 0x004
+#define MX27_PAD_SD1_D0__CSPI3_MISO                        0x92 0x001
+#define MX27_PAD_SD1_D0__GPIO5_18                          0x92 0x032
+#define MX27_PAD_SD1_D1__SD1_D1                            0x93 0x004
+#define MX27_PAD_SD1_D1__GPIO5_19                          0x93 0x032
+#define MX27_PAD_SD1_D2__SD1_D2                            0x94 0x004
+#define MX27_PAD_SD1_D2__GPIO5_20                          0x94 0x032
+#define MX27_PAD_SD1_D3__SD1_D3                            0x95 0x004
+#define MX27_PAD_SD1_D3__CSPI3_SS                          0x95 0x005
+#define MX27_PAD_SD1_D3__GPIO5_21                          0x95 0x032
+#define MX27_PAD_SD1_CMD__SD1_CMD                          0x96 0x004
+#define MX27_PAD_SD1_CMD__CSPI3_MOSI                       0x96 0x005
+#define MX27_PAD_SD1_CMD__GPIO5_22                         0x96 0x032
+#define MX27_PAD_SD1_CLK__SD1_CLK                          0x97 0x004
+#define MX27_PAD_SD1_CLK__CSPI3_SCLK                       0x97 0x005
+#define MX27_PAD_SD1_CLK__GPIO5_23                         0x97 0x032
+#define MX27_PAD_USBOTG_CLK__USBOTG_CLK                    0x98 0x000
+#define MX27_PAD_USBOTG_CLK__GPIO5_24                      0x98 0x032
+#define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7                0x99 0x004
+#define MX27_PAD_USBOTG_DATA7__GPIO5_25                    0x99 0x032
+#define MX27_PAD_UNUSED9__UNUSED9                          0x9a 0x004
+#define MX27_PAD_UNUSED9__GPIO5_26                         0x9a 0x032
+#define MX27_PAD_UNUSED10__UNUSED10                        0x9b 0x004
+#define MX27_PAD_UNUSED10__GPIO5_27                        0x9b 0x032
+#define MX27_PAD_UNUSED11__UNUSED11                        0x9c 0x004
+#define MX27_PAD_UNUSED11__GPIO5_28                        0x9c 0x032
+#define MX27_PAD_UNUSED12__UNUSED12                        0x9d 0x004
+#define MX27_PAD_UNUSED12__GPIO5_29                        0x9d 0x032
+#define MX27_PAD_UNUSED13__UNUSED13                        0x9e 0x004
+#define MX27_PAD_UNUSED13__GPIO5_30                        0x9e 0x032
+#define MX27_PAD_UNUSED14__UNUSED14                        0x9f 0x004
+#define MX27_PAD_UNUSED14__GPIO5_31                        0x9f 0x032
+#define MX27_PAD_NFRB__NFRB                                0xa0 0x000
+#define MX27_PAD_NFRB__ETMTRACEPKT3                        0xa0 0x005
+#define MX27_PAD_NFRB__GPIO6_0                             0xa0 0x032
+#define MX27_PAD_NFCLE__NFCLE                              0xa1 0x004
+#define MX27_PAD_NFCLE__ETMTRACEPKT0                       0xa1 0x005
+#define MX27_PAD_NFCLE__GPIO6_1                            0xa1 0x032
+#define MX27_PAD_NFWP_B__NFWP_B                            0xa2 0x004
+#define MX27_PAD_NFWP_B__ETMTRACEPKT1                      0xa2 0x005
+#define MX27_PAD_NFWP_B__GPIO6_2                           0xa2 0x032
+#define MX27_PAD_NFCE_B__NFCE_B                            0xa3 0x004
+#define MX27_PAD_NFCE_B__ETMTRACEPKT2                      0xa3 0x005
+#define MX27_PAD_NFCE_B__GPIO6_3                           0xa3 0x032
+#define MX27_PAD_NFALE__NFALE                              0xa4 0x004
+#define MX27_PAD_NFALE__ETMPIPESTAT0                       0xa4 0x005
+#define MX27_PAD_NFALE__GPIO6_4                            0xa4 0x032
+#define MX27_PAD_NFRE_B__NFRE_B                            0xa5 0x004
+#define MX27_PAD_NFRE_B__ETMPIPESTAT1                      0xa5 0x005
+#define MX27_PAD_NFRE_B__GPIO6_5                           0xa5 0x032
+#define MX27_PAD_NFWE_B__NFWE_B                            0xa6 0x004
+#define MX27_PAD_NFWE_B__ETMPIPESTAT2                      0xa6 0x005
+#define MX27_PAD_NFWE_B__GPIO6_6                           0xa6 0x032
+#define MX27_PAD_PC_POE__PC_POE                            0xa7 0x004
+#define MX27_PAD_PC_POE__ATA_BUFFER_EN                     0xa7 0x005
+#define MX27_PAD_PC_POE__GPIO6_7                           0xa7 0x032
+#define MX27_PAD_PC_RW_B__PC_RW_B                          0xa8 0x004
+#define MX27_PAD_PC_RW_B__ATA_IORDY                        0xa8 0x001
+#define MX27_PAD_PC_RW_B__GPIO6_8                          0xa8 0x032
+#define MX27_PAD_IOIS16__IOIS16                            0xa9 0x000
+#define MX27_PAD_IOIS16__ATA_INTRQ                         0xa9 0x001
+#define MX27_PAD_IOIS16__GPIO6_9                           0xa9 0x032
+#define MX27_PAD_PC_RST__PC_RST                            0xaa 0x004
+#define MX27_PAD_PC_RST__ATA_RESET_B                       0xaa 0x005
+#define MX27_PAD_PC_RST__GPIO6_10                          0xaa 0x032
+#define MX27_PAD_PC_BVD2__PC_BVD2                          0xab 0x000
+#define MX27_PAD_PC_BVD2__ATA_DMACK                        0xab 0x005
+#define MX27_PAD_PC_BVD2__GPIO6_11                         0xab 0x032
+#define MX27_PAD_PC_BVD1__PC_BVD1                          0xac 0x000
+#define MX27_PAD_PC_BVD1__ATA_DMARQ                        0xac 0x001
+#define MX27_PAD_PC_BVD1__GPIO6_12                         0xac 0x032
+#define MX27_PAD_PC_VS2__PC_VS2                            0xad 0x000
+#define MX27_PAD_PC_VS2__ATA_DA0                           0xad 0x005
+#define MX27_PAD_PC_VS2__GPIO6_13                          0xad 0x032
+#define MX27_PAD_PC_VS1__PC_VS1                            0xae 0x000
+#define MX27_PAD_PC_VS1__ATA_DA1                           0xae 0x005
+#define MX27_PAD_PC_VS1__GPIO6_14                          0xae 0x032
+#define MX27_PAD_CLKO__CLKO                                0xaf 0x004
+#define MX27_PAD_CLKO__GPIO6_15                            0xaf 0x032
+#define MX27_PAD_PC_PWRON__PC_PWRON                        0xb0 0x000
+#define MX27_PAD_PC_PWRON__ATA_DA2                         0xb0 0x005
+#define MX27_PAD_PC_PWRON__GPIO6_16                        0xb0 0x032
+#define MX27_PAD_PC_READY__PC_READY                        0xb1 0x000
+#define MX27_PAD_PC_READY__ATA_CS0                         0xb1 0x005
+#define MX27_PAD_PC_READY__GPIO6_17                        0xb1 0x032
+#define MX27_PAD_PC_WAIT_B__PC_WAIT_B                      0xb2 0x000
+#define MX27_PAD_PC_WAIT_B__ATA_CS1                        0xb2 0x005
+#define MX27_PAD_PC_WAIT_B__GPIO6_18                       0xb2 0x032
+#define MX27_PAD_PC_CD2_B__PC_CD2_B                        0xb3 0x000
+#define MX27_PAD_PC_CD2_B__ATA_DIOW                        0xb3 0x005
+#define MX27_PAD_PC_CD2_B__GPIO6_19                        0xb3 0x032
+#define MX27_PAD_PC_CD1_B__PC_CD1_B                        0xb4 0x000
+#define MX27_PAD_PC_CD1_B__ATA_DIOR                        0xb4 0x005
+#define MX27_PAD_PC_CD1_B__GPIO6_20                        0xb4 0x032
+#define MX27_PAD_CS4_B__CS4_B                              0xb5 0x004
+#define MX27_PAD_CS4_B__ETMTRACESYNC                       0xb5 0x005
+#define MX27_PAD_CS4_B__GPIO6_21                           0xb5 0x032
+#define MX27_PAD_CS5_B__CS5_B                              0xb6 0x004
+#define MX27_PAD_CS5_B__ETMTRACECLK                        0xb6 0x005
+#define MX27_PAD_CS5_B__GPIO6_22                           0xb6 0x032
+#define MX27_PAD_ATA_DATA15__ATA_DATA15                    0xb7 0x004
+#define MX27_PAD_ATA_DATA15__ETMTRACEPKT4                  0xb7 0x005
+#define MX27_PAD_ATA_DATA15__FEC_TX_EN                     0xb7 0x006
+#define MX27_PAD_ATA_DATA15__GPIO6_23                      0xb7 0x032
+#define MX27_PAD_UNUSED15__UNUSED15                        0xb8 0x004
+#define MX27_PAD_UNUSED15__GPIO6_24                        0xb8 0x032
+#define MX27_PAD_UNUSED16__UNUSED16                        0xb9 0x004
+#define MX27_PAD_UNUSED16__GPIO6_25                        0xb9 0x032
+#define MX27_PAD_UNUSED17__UNUSED17                        0xba 0x004
+#define MX27_PAD_UNUSED17__GPIO6_26                        0xba 0x032
+#define MX27_PAD_UNUSED18__UNUSED18                        0xbb 0x004
+#define MX27_PAD_UNUSED18__GPIO6_27                        0xbb 0x032
+#define MX27_PAD_UNUSED19__UNUSED19                        0xbc 0x004
+#define MX27_PAD_UNUSED19__GPIO6_28                        0xbc 0x032
+#define MX27_PAD_UNUSED20__UNUSED20                        0xbd 0x004
+#define MX27_PAD_UNUSED20__GPIO6_29                        0xbd 0x032
+#define MX27_PAD_UNUSED21__UNUSED21                        0xbe 0x004
+#define MX27_PAD_UNUSED21__GPIO6_30                        0xbe 0x032
+#define MX27_PAD_UNUSED22__UNUSED22                        0xbf 0x004
+#define MX27_PAD_UNUSED22__GPIO6_31                        0xbf 0x032
+
+#endif /* __DTS_IMX27_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 826231eb4446..a75555c39533 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -10,9 +10,14 @@
  */
 
 #include "skeleton.dtsi"
+#include "imx27-pinfunc.h"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -45,6 +50,7 @@
 
 		osc26m {
 			compatible = "fsl,imx-osc26m", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <26000000>;
 		};
 	};
@@ -204,6 +210,30 @@
 				status = "disabled";
 			};
 
+			ssi1: ssi@10010000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+				reg = <0x10010000 0x1000>;
+				interrupts = <14>;
+				clocks = <&clks 26>;
+				dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
+				dma-names = "rx0", "tx0", "rx1", "tx1";
+				fsl,fifo-depth = <8>;
+				status = "disabled";
+			};
+
+			ssi2: ssi@10011000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+				reg = <0x10011000 0x1000>;
+				interrupts = <13>;
+				clocks = <&clks 25>;
+				dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
+				dma-names = "rx0", "tx0", "rx1", "tx1";
+				fsl,fifo-depth = <8>;
+				status = "disabled";
+			};
+
 			i2c1: i2c@10012000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -236,64 +266,72 @@
 				status = "disabled";
 			};
 
-			gpio1: gpio@10015000 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015000 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@10015100 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015100 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@10015200 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015200 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@10015300 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015300 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio5: gpio@10015400 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015400 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio6: gpio@10015500 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015500 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+			iomuxc: iomuxc@10015000 {
+				compatible = "fsl,imx27-iomuxc";
+				reg = <0x10015000 0x600>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				gpio1: gpio@10015000 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015000 0x100>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@10015100 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015100 0x100>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio@10015200 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015200 0x100>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio@10015300 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015300 0x100>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio5: gpio@10015400 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015400 0x100>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio6: gpio@10015500 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015500 0x100>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 
 			audmux: audmux@10016000 {
@@ -404,6 +442,40 @@
 				iram = <&iram>;
 			};
 
+			usbotg: usb@10024000 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024000 0x200>;
+				interrupts = <56>;
+				clocks = <&clks 75>;
+				fsl,usbmisc = <&usbmisc 0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@10024200 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024200 0x200>;
+				interrupts = <54>;
+				clocks = <&clks 75>;
+				fsl,usbmisc = <&usbmisc 1>;
+				status = "disabled";
+			};
+
+			usbh2: usb@10024400 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024400 0x200>;
+				interrupts = <55>;
+				clocks = <&clks 75>;
+				fsl,usbmisc = <&usbmisc 2>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@10024600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx27-usbmisc";
+				reg = <0x10024600 0x200>;
+				clocks = <&clks 62>;
+			};
+
 			sahara2: sahara@10025000 {
 				compatible = "fsl,imx27-sahara";
 				reg = <0x10025000 0x1000>;
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index e2efd8d89c4f..221cac4fb2cd 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -48,6 +48,7 @@
 						MX28_PAD_LCD_D20__GPIO_1_20
 						MX28_PAD_LCD_D21__GPIO_1_21
 						MX28_PAD_LCD_D22__GPIO_1_22
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
@@ -66,6 +67,16 @@
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
+
+				usb0_otg_apf28dev: otg-apf28dev@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D23__GPIO_1_23
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
 			};
 
 			lcdif@80030000 {
@@ -131,6 +142,8 @@
 
 	ahb@80080000 {
 		usb0: usb@80080000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_otg_apf28dev>;
 			vbus-supply = <&reg_usb0_vbus>;
 			status = "okay";
 		};
@@ -150,13 +163,17 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb0_vbus: usb0_vbus {
+		reg_usb0_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 23 1>;
+			enable-active-high;
 		};
 	};
 
@@ -177,4 +194,14 @@
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio0 17 0>;
+			linux,code = <0x100>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 6f254ca816cb..e1ce9179db63 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -193,9 +193,12 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index cabb6171a19d..ae7c3390e65a 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -100,6 +100,8 @@
 		usb0: usb@80080000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb0_otg_cfa10036>;
+			dr_mode = "peripheral";
+			phy_type = "utmi";
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index f93e9a700e52..e5beaa58bb40 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -54,7 +54,7 @@
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};
@@ -72,9 +72,12 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb_pins_cfa10037>;
 			regulator-name = "usb1_vbus";
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 7087b4bf6a8f..7d51459de5e8 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -229,15 +229,39 @@
 				i2c-parent = <&i2c1>;
 
 				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
 					reg = <0>;
+
+					adc0: nau7802@2a {
+						compatible = "nuvoton,nau7802";
+						reg = <0x2a>;
+						nuvoton,vldo = <3000>;
+					};
 				};
 
 				i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
 					reg = <1>;
+
+					adc1: nau7802@2a {
+						compatible = "nuvoton,nau7802";
+						reg = <0x2a>;
+						nuvoton,vldo = <3000>;
+					};
 				};
 
 				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
 					reg = <2>;
+
+					adc2: nau7802@2a {
+						compatible = "nuvoton,nau7802";
+						reg = <0x2a>;
+						nuvoton,vldo = <3000>;
+					};
 				};
 
 				i2c@3 {
@@ -274,7 +298,7 @@
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};
@@ -282,9 +306,12 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb_pins_cfa10049>;
 			regulator-name = "usb1_vbus";
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 3c1312885ae0..c4e00ce4b6da 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -134,7 +134,7 @@
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};
@@ -142,9 +142,12 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb_pins_cfa10057>;
 			regulator-name = "usb1_vbus";
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index 2469d34df0ae..7c9cc783f0d1 100644
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -101,7 +101,7 @@
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};
@@ -109,11 +109,14 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@0 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb_pins_cfa10058>;
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
new file mode 100644
index 000000000000..ce1a7effba37
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill";
+	compatible = "i2se,duckbill", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_3p3v>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins_a: led_gpio@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__GPIO_3_4
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-supply = <&reg_3p3v>;
+			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a>;
+
+		status {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		failure {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
new file mode 100644
index 000000000000..7c1572c5a4fb
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
+ */
+
+/dts-v1/;
+#include "imx28-eukrea-mbmx28lc.dtsi"
+
+/ {
+	model = "Eukrea Electromatique MBMX283LC";
+	compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl{
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_cpuimx283>;
+
+	hog_pins_cpuimx283: hog-cpuimx283@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
new file mode 100644
index 000000000000..e773144e1e03
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC
+ */
+
+#include "imx28-eukrea-mbmx283lc.dts"
+
+/ {
+	model = "Eukrea Electromatique MBMX287LC";
+	compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>;
+	hog_pins_cpuimx287: hog-cpuimx287@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
new file mode 100644
index 000000000000..927b391d2058
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
@@ -0,0 +1,326 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "Eukrea Electromatique MBMX28LC";
+	compatible = "eukrea,mbmx28lc", "fsl,imx28";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 1000000>;
+		brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
+		default-brightness-level = <10>;
+	};
+
+	button-sw3 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
+
+		sw3 {
+			label = "SW3";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	button-sw4 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
+
+		sw4 {
+			label = "SW4";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	led-d6 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_d6_pins_mbmx28lc>;
+
+		led1 {
+			label = "d6";
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led-d7 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_d7_pins_mbmx28lc>;
+
+		led1 {
+			label = "d7";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_lcd_3v3: regulator@1 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb0_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-mbmx28lc-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-mbmx28lc-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_4pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
+	lcd-supply = <&reg_lcd_3v3>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		model = "43WVF1G-0";
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9072000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <10>;
+				hfront-porch = <5>;
+				vback-porch = <8>;
+				vfront-porch = <8>;
+				hsync-len = <40>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D21__GPIO_1_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D20__GPIO_1_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_VSYNC__LCD_VSYNC
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D22__GPIO_1_22
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D18__GPIO_1_18
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D19__GPIO_1_19
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	cd-inverted;
+	status = "okay";
+};
+
+&usb0 {
+	disable-over-current;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_b>;
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 4267c2b05d60..e4cc44c98585 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -193,6 +193,7 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
+				clock-frequency = <400000>;
 				status = "okay";
 
 				sgtl5000: codec@0a {
@@ -278,33 +279,39 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		reg_vddio_sd0: vddio-sd0 {
+		reg_vddio_sd0: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "vddio-sd0";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio3 28 0>;
 		};
 
-		reg_fec_3v3: fec-3v3 {
+		reg_fec_3v3: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			regulator-name = "fec-3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio2 15 0>;
 		};
 
-		reg_usb0_vbus: usb0_vbus {
+		reg_usb0_vbus: regulator@3 {
 			compatible = "regulator-fixed";
+			reg = <3>;
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -312,8 +319,9 @@
 			enable-active-high;
 		};
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@4 {
 			compatible = "regulator-fixed";
+			reg = <4>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -321,8 +329,9 @@
 			enable-active-high;
 		};
 
-		reg_lcd_3v3: lcd-3v3 {
+		reg_lcd_3v3: regulator@5 {
 			compatible = "regulator-fixed";
+			reg = <5>;
 			regulator-name = "lcd-3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -330,8 +339,9 @@
 			enable-active-high;
 		};
 
-		reg_can_3v3: can-3v3 {
+		reg_can_3v3: regulator@6 {
 			compatible = "regulator-fixed";
+			reg = <6>;
 			regulator-name = "can-3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index d3958da60bd7..9348ce59dda4 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -116,7 +116,6 @@
 				pinctrl-0 = <&lcdif_24bit_pins_a
 					     &lcdif_pins_m28>;
 				display = <&display>;
-				reset-active-high;
 				status = "okay";
 
 				display: display0 {
@@ -180,7 +179,7 @@
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			disable-over-current;
 			status = "okay";
 		};
@@ -229,33 +228,39 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		reg_vddio_sd0: vddio-sd0 {
+		reg_vddio_sd0: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "vddio-sd0";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio3 29 0>;
 		};
 
-		reg_vddio_sd1: vddio-sd1 {
+		reg_vddio_sd1: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			regulator-name = "vddio-sd1";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio2 19 0>;
 		};
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@3 {
 			compatible = "regulator-fixed";
+			reg = <3>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 8e2477fbe1d7..f0ad7b9b9d9a 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -194,7 +194,7 @@
 				};
 
 				rtc: rtc@68 {
-					compatible = "stm,mt41t62";
+					compatible = "stm,m41t62";
 					reg = <0x68>;
 				};
 			};
@@ -248,14 +248,14 @@
 		usb0: usb@80080000 {
 			vbus-supply = <&reg_usb0_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy0_pins_a>;
+			pinctrl-0 = <&usb0_pins_a>;
 			status = "okay";
 		};
 
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			status = "okay";
 		};
 
@@ -285,33 +285,39 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		reg_vddio_sd0: vddio-sd0 {
+		reg_vddio_sd0: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "vddio-sd0";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio3 28 0>;
 		};
 
-		reg_usb0_vbus: usb0_vbus {
+		reg_usb0_vbus: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio3 12 0>;
 		};
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@3 {
 			compatible = "regulator-fixed";
+			reg = <3>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 4870f07bf56a..0ce3cb8e7914 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -106,7 +106,7 @@
 		usb0: usb@80080000 {
 			vbus-supply = <&reg_usb0_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy0_pins_b>;
+			pinctrl-0 = <&usb0_pins_b>;
 			status = "okay";
 		};
 
@@ -127,9 +127,12 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb0_vbus: usb0_vbus {
+		reg_usb0_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index be5a0550d58c..e14bd86f3e99 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -43,9 +43,12 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb0_vbus: usb0_vbus {
+		reg_usb0_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -53,8 +56,9 @@
 			enable-active-high;
 		};
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -62,35 +66,38 @@
 			enable-active-high;
 		};
 
-		reg_2p5v: 2p5v {
+		reg_2p5v: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			regulator-name = "2P5V";
 			regulator-min-microvolt = <2500000>;
 			regulator-max-microvolt = <2500000>;
 			regulator-always-on;
 		};
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@3 {
 			compatible = "regulator-fixed";
+			reg = <3>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		reg_can_xcvr: can-xcvr {
+		reg_can_xcvr: regulator@4 {
 			compatible = "regulator-fixed";
+			reg = <4>;
 			regulator-name = "CAN XCVR";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio1 0 0>;
-			enable-active-low;
 			pinctrl-names = "default";
 			pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
 		};
 
-		reg_lcd: lcd-power {
+		reg_lcd: regulator@5 {
 			compatible = "regulator-fixed";
+			reg = <5>;
 			regulator-name = "LCD POWER";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -98,8 +105,9 @@
 			enable-active-high;
 		};
 
-		reg_lcd_reset: lcd-reset {
+		reg_lcd_reset: regulator@6 {
 			compatible = "regulator-fixed";
+			reg = <6>;
 			regulator-name = "LCD RESET";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index f8e9b20f6982..a95cc5358ff4 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -9,6 +9,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include "skeleton.dtsi"
 #include "imx28-pinfunc.h"
 
@@ -32,6 +33,8 @@
 		serial4 = &auart4;
 		spi0 = &ssp1;
 		spi1 = &ssp2;
+		usbphy0 = &usbphy0;
+		usbphy1 = &usbphy1;
 	};
 
 	cpus {
@@ -343,6 +346,19 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				auart2_pins_a: auart2-pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
+						MX28_PAD_AUART2_CTS__AUART2_CTS
+						MX28_PAD_AUART2_RTS__AUART2_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				auart3_pins_a: auart3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -655,6 +671,33 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				lcdif_18bit_pins_a: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				lcdif_16bit_pins_a: lcdif-16bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -743,7 +786,7 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				usbphy0_pins_a: usbphy0@0 {
+				usb0_pins_a: usb0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
@@ -753,7 +796,7 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				usbphy0_pins_b: usbphy0@1 {
+				usb0_pins_b: usb0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
 						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
@@ -763,7 +806,7 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				usbphy1_pins_a: usbphy1@0 {
+				usb1_pins_a: usb1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
@@ -782,6 +825,17 @@
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
+
+				usb0_id_pins_b: usb0id1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
 			};
 
 			digctl: digctl@8001c000 {
@@ -946,6 +1000,7 @@
 						20 21 22 23 24 25>;
 				status = "disabled";
 				clocks = <&clks 41>;
+				#io-channel-cells = <1>;
 			};
 
 			spdif: spdif@80054000 {
@@ -1130,4 +1185,9 @@
 			status = "disabled";
 		};
 	};
+
+	iio_hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&lradc 8>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
new file mode 100644
index 000000000000..9c2b715ab8bf
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,cpuimx35", "fsl,imx35";
+
+	memory {
+		reg = <0x80000000 0x8000000>; /* 128M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsc2007: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		gpios = <&gpio3 2 0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0x2 0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007_1>;
+		reg = <0x48>;
+		ti,x-plate-ohms = <180>;
+	};
+};
+
+&iomuxc {
+	imx35-eukrea {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
+				MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
+				MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX35_PAD_FEC_COL__FEC_COL		0x80000000
+				MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
+				MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
+				MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
+				MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
+				MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
+				MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
+				MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
+				MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
+				MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
+				MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
+				MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
+				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
+			>;
+		};
+
+		pinctrl_tsc2007_1: tsc2007grp-1 {
+			fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
new file mode 100644
index 000000000000..f04ae91eea89
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -0,0 +1,165 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx35-eukrea-cpuimx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bp1>;
+
+		bp1 {
+			label = "BP1";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led1>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx35-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,mux-int-port = <1>;
+		fsl,mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 24>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx35-eukrea {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
+				MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
+				MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
+				MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
+			>;
+		};
+
+		pinctrl_bp1: bp1grp {
+			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+				MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
+			>;
+		};
+
+		pinctrl_led1: led1grp {
+			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
+		};
+
+		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
+			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+				MX35_PAD_CTS1__UART1_CTS		0x1c5
+				MX35_PAD_RTS1__UART1_RTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
+				MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
+				MX35_PAD_RTS2__UART2_RTS		0x1c5
+				MX35_PAD_CTS2__UART2_CTS		0x1c5
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	codec-handle = <&tlv320aic23>;
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	phy_type = "serial";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "otg";
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts
new file mode 100644
index 000000000000..8d715523708f
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-pdk.dts
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx35.dtsi"
+
+/ {
+	model = "Freescale i.MX35 Product Development Kit";
+	compatible = "fsl,imx35-pdk", "fsl,imx35";
+
+	memory {
+		reg = <0x80000000 0x8000000>,
+		      <0x90000000 0x8000000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx35-pdk {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+				MX35_PAD_CTS1__UART1_CTS		0x1c5
+				MX35_PAD_RTS1__UART1_RTS		0x1c5
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <16>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
new file mode 100644
index 000000000000..4759abb49436
--- /dev/null
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -0,0 +1,376 @@
+/*
+ * Copyright 2012 Steffen Trumtrar, Pengutronix
+ *
+ * based on imx27.dtsi
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include "imx35-pinfunc.h"
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm1136";
+			device_type = "cpu";
+		};
+	};
+
+	avic: avic-interrupt-controller@68000000 {
+		compatible = "fsl,imx35-avic", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x68000000 0x10000000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&avic>;
+		ranges;
+
+		L2: l2-cache@30000000 {
+			compatible = "arm,l210-cache";
+			reg = <0x30000000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		aips1: aips@43f00000 {
+			compatible = "fsl,aips", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x43f00000 0x100000>;
+			ranges;
+
+			i2c1: i2c@43f80000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f80000 0x4000>;
+				clocks = <&clks 51>;
+				clock-names = "ipg_per";
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f84000 0x4000>;
+				clocks = <&clks 53>;
+				clock-names = "ipg_per";
+				interrupts = <3>;
+				status = "disabled";
+			};
+
+			uart1: serial@43f90000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x43f90000 0x4000>;
+				clocks = <&clks 9>, <&clks 70>;
+				clock-names = "ipg", "per";
+				interrupts = <45>;
+				status = "disabled";
+			};
+
+			uart2: serial@43f94000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x43f94000 0x4000>;
+				clocks = <&clks 9>, <&clks 71>;
+				clock-names = "ipg", "per";
+				interrupts = <32>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@43f98000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f98000 0x4000>;
+				clocks = <&clks 52>;
+				clock-names = "ipg_per";
+				interrupts = <4>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@43fa0000 {
+				compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
+				reg = <0x43fa0000 0x4000>;
+				interrupts = <11>;
+				clocks = <&clks 68>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			spi1: cspi@43fa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-cspi";
+				reg = <0x43fa4000 0x4000>;
+				clocks = <&clks 35 &clks 35>;
+				clock-names = "ipg", "per";
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@43fac000 {
+				compatible = "fsl,imx35-iomuxc";
+				reg = <0x43fac000 0x4000>;
+			};
+		};
+
+		spba: spba-bus@50000000 {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x100000>;
+			ranges;
+
+			uart3: serial@5000c000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x5000c000 0x4000>;
+				clocks = <&clks 9>, <&clks 72>;
+				clock-names = "ipg", "per";
+				interrupts = <18>;
+				status = "disabled";
+			};
+
+			spi2: cspi@50010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-cspi";
+				reg = <0x50010000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks 36 &clks 36>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			fec: fec@50038000 {
+				compatible = "fsl,imx35-fec", "fsl,imx27-fec";
+				reg = <0x50038000 0x4000>;
+				clocks = <&clks 46>, <&clks 8>;
+				clock-names = "ipg", "ahb";
+				interrupts = <57>;
+				status = "disabled";
+			};
+		};
+
+		aips2: aips@53f00000 {
+			compatible = "fsl,aips", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x53f00000 0x100000>;
+			ranges;
+
+			clks: ccm@53f80000 {
+				compatible = "fsl,imx35-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>;
+				#clock-cells = <1>;
+			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <56>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			esdhc1: esdhc@53fb4000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fb4000 0x4000>;
+				interrupts = <7>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc2: esdhc@53fb8000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fb8000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 44>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc3: esdhc@53fbc000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 45>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			audmux: audmux@53fc4000 {
+				compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
+				reg = <0x53fc4000 0x4000>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma: sdma@53fd4000 {
+				compatible = "fsl,imx35-sdma";
+				reg = <0x53fd4000 0x4000>;
+				clocks = <&clks 9>, <&clks 65>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				interrupts = <34>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
+			};
+
+			wdog: wdog@53fdc000 {
+				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 74>;
+				clock-names = "";
+				interrupts = <55>;
+			};
+
+			can1: can@53fe4000 {
+				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+				reg = <0x53fe4000 0x1000>;
+				clocks = <&clks 33>;
+				clock-names = "ipg";
+				interrupts = <43>;
+				status = "disabled";
+			};
+
+			can2: can@53fe8000 {
+				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+				reg = <0x53fe8000 0x1000>;
+				clocks = <&clks 34>;
+				clock-names = "ipg";
+				interrupts = <44>;
+				status = "disabled";
+			};
+
+			usbotg: usb@53ff4000 {
+				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+				reg = <0x53ff4000 0x0200>;
+				interrupts = <37>;
+				clocks = <&clks 73>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbhost1: usb@53ff4400 {
+				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+				reg = <0x53ff4400 0x0200>;
+				interrupts = <35>;
+				clocks = <&clks 73>;
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53ff4600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx35-usbmisc";
+				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+				clock-names = "ipg", "ahb", "per";
+				reg = <0x53ff4600 0x00f>;
+			};
+		};
+
+		emi@80000000 { /* External Memory Interface */
+			compatible = "fsl,emi", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x40000000>;
+			ranges;
+
+			nfc: nand@bb000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
+				reg = <0xbb000000 0x2000>;
+				clocks = <&clks 29>;
+				clock-names = "";
+				interrupts = <33>;
+				status = "disabled";
+			};
+
+			weim: weim@b8002000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clocks = <&clks 0>;
+				compatible = "fsl,imx35-weim", "fsl,imx27-weim";
+				reg = <0xb8002000 0x1000>;
+				ranges = <
+					0 0 0xa0000000 0x8000000
+					1 0 0xa8000000 0x8000000
+					2 0 0xb0000000 0x2000000
+					3 0 0xb2000000 0x2000000
+					4 0 0xb4000000 0x2000000
+					5 0 0xb6000000 0x2000000
+				>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usb-phy@0 {
+			reg = <0>;
+			compatible = "usb-nop-xceiv";
+		};
+
+		usbphy1: usb-phy@1 {
+			reg = <1>;
+			compatible = "usb-nop-xceiv";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
new file mode 100644
index 000000000000..1b22512c91bd
--- /dev/null
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx50.dtsi"
+
+/ {
+	model = "Freescale i.MX50 Evaluation Kit";
+	compatible = "fsl,imx50-evk", "fsl,imx50";
+
+	memory {
+		reg = <0x70000000 0x80000000>;
+	};
+};
+
+&cspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi>;
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>;
+	status = "okay";
+
+	flash: m25p32@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p32", "m25p80";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "kernel";
+			reg = <0x100000 0x300000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 12 0>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx50-evk {
+		pinctrl_cspi: cspigrp {
+			fsl,pins = <
+				MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
+				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
+				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
+				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
+				MX50_PAD_ECSPI1_MOSI__CSPI_SS1		0xf4
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX50_PAD_SSI_RXFS__FEC_MDC		0x80
+				MX50_PAD_SSI_RXC__FEC_MDIO		0x80
+				MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
+				MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
+				MX50_PAD_DISP_D2__FEC_RX_DV		0x80
+				MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
+				MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
+				MX50_PAD_DISP_D5__FEC_TX_EN		0x80
+				MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
+				MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
+				MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
+				MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
+				MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbh2 {
+	status = "okay";
+};
+
+&usbh3 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/imx50-pinfunc.h
new file mode 100644
index 000000000000..97e6e7f4ebdd
--- /dev/null
+++ b/arch/arm/boot/dts/imx50-pinfunc.h
@@ -0,0 +1,923 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX50_PINFUNC_H
+#define __DTS_IMX50_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX50_PAD_KEY_COL0__KPP_COL_0				0x020 0x2cc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL0__GPIO4_0				0x020 0x2cc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL0__EIM_NANDF_CLE			0x020 0x2cc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL0__CTI_TRIGIN7				0x020 0x2cc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL0__USBPHY1_TXREADY			0x020 0x2cc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW0__KPP_ROW_0				0x024 0x2d0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW0__GPIO4_1				0x024 0x2d0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE			0x024 0x2d0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7			0x024 0x2d0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID			0x024 0x2d0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL1__KPP_COL_1				0x028 0x2d4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL1__GPIO4_2				0x028 0x2d4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL1__EIM_NANDF_CEN_0			0x028 0x2d4 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL1__CTI_TRIGOUT_ACK6			0x028 0x2d4 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL1__USBPHY1_RXACTIVE			0x028 0x2d4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW1__KPP_ROW_1				0x02c 0x2d8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW1__GPIO4_3				0x02c 0x2d8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1			0x02c 0x2d8 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7			0x02c 0x2d8 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR			0x02c 0x2d8 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL2__KPP_COL_1				0x030 0x2dc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL2__GPIO4_4				0x030 0x2dc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2			0x030 0x2dc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL2__CTI_TRIGOUT6				0x030 0x2dc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL2__USBPHY1_SIECLOCK			0x030 0x2dc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW2__KPP_ROW_2				0x034 0x2e0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW2__GPIO4_5				0x034 0x2e0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3			0x034 0x2e0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7				0x034 0x2e0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0			0x034 0x2e0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL3__KPP_COL_2				0x038 0x2e4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL3__GPIO4_6				0x038 0x2e4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL3__EIM_NANDF_READY0			0x038 0x2e4 0x7b4 0x2 0x0
+#define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0			0x038 0x2e4 0x7b8 0x6 0x0
+#define MX50_PAD_KEY_COL3__USBPHY1_LINESTATE_1			0x038 0x2e4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW3__KPP_ROW_3				0x03c 0x2e8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW3__GPIO4_7				0x03c 0x2e8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW3__EIM_NANDF_DQS			0x03c 0x2e8 0x7b0 0x2 0x0
+#define MX50_PAD_KEY_ROW3__SDMA_EXT_EVENT_1			0x03c 0x2e8 0x7bc 0x6 0x0
+#define MX50_PAD_KEY_ROW3__USBPHY1_VBUSVALID			0x03c 0x2e8 0x000 0x7 0x0
+#define MX50_PAD_I2C1_SCL__I2C1_SCL				0x040 0x2ec 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SCL__GPIO6_18				0x040 0x2ec 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SCL__UART2_TXD_MUX			0x040 0x2ec 0x7cc 0x2 0x0
+#define MX50_PAD_I2C1_SDA__I2C1_SDA				0x044 0x2f0 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SDA__GPIO6_19				0x044 0x2f0 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SDA__UART2_RXD_MUX			0x044 0x2f0 0x7cc 0x2 0x1
+#define MX50_PAD_I2C2_SCL__I2C2_SCL				0x048 0x2f4 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SCL__GPIO6_20				0x048 0x2f4 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SCL__UART2_CTS				0x048 0x2f4 0x000 0x2 0x0
+#define MX50_PAD_I2C2_SDA__I2C2_SDA				0x04c 0x2f8 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SDA__GPIO6_21				0x04c 0x2f8 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SDA__UART2_RTS				0x04c 0x2f8 0x7c8 0x2 0x1
+#define MX50_PAD_I2C3_SCL__I2C3_SCL				0x050 0x2fc 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SCL__GPIO6_22				0x050 0x2fc 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SCL__FEC_MDC				0x050 0x2fc 0x000 0x2 0x0
+#define MX50_PAD_I2C3_SCL__GPC_PMIC_RDY				0x050 0x2fc 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SCL__GPT_CAPIN1				0x050 0x2fc 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SCL__OBSERVE_MUX_OBSRV_INT_OUT0		0x050 0x2fc 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SCL__USBOH1_USBOTG_OC			0x050 0x2fc 0x7e8 0x7 0x0
+#define MX50_PAD_I2C3_SDA__I2C3_SDA				0x054 0x300 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SDA__GPIO6_23				0x054 0x300 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SDA__FEC_MDIO				0x054 0x300 0x774 0x2 0x0
+#define MX50_PAD_I2C3_SDA__TZIC_PWRFAIL_INT			0x054 0x300 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SDA__SRTC_ALARM_DEB			0x054 0x300 0x000 0x4 0x0
+#define MX50_PAD_I2C3_SDA__GPT_CAPIN2				0x054 0x300 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SDA__OBSERVE_MUX_OBSRV_INT_OUT1		0x054 0x300 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SDA__USBOH1_USBOTG_PWR			0x054 0x300 0x000 0x7 0x0
+#define MX50_PAD_PWM1__PWM1_PWMO				0x058 0x304 0x000 0x0 0x0
+#define MX50_PAD_PWM1__GPIO6_24					0x058 0x304 0x000 0x1 0x0
+#define MX50_PAD_PWM1__USBOH1_USBOTG_OC				0x058 0x304 0x7e8 0x2 0x1
+#define MX50_PAD_PWM1__GPT_CMPOUT1				0x058 0x304 0x000 0x5 0x0
+#define MX50_PAD_PWM1__OBSERVE_MUX_OBSRV_INT_OUT2		0x058 0x304 0x000 0x6 0x0
+#define MX50_PAD_PWM1__SJC_FAIL					0x058 0x304 0x000 0x7 0x0
+#define MX50_PAD_PWM2__PWM2_PWMO				0x05c 0x308 0x000 0x0 0x0
+#define MX50_PAD_PWM2__GPIO6_25					0x05c 0x308 0x000 0x1 0x0
+#define MX50_PAD_PWM2__USBOH1_USBOTG_PWR			0x05c 0x308 0x000 0x2 0x0
+#define MX50_PAD_PWM2__GPT_CMPOUT2				0x05c 0x308 0x000 0x5 0x0
+#define MX50_PAD_PWM2__OBSERVE_MUX_OBSRV_INT_OUT3		0x05c 0x308 0x000 0x6 0x0
+#define MX50_PAD_PWM2__SRC_ANY_PU_RST				0x05c 0x308 0x000 0x7 0x0
+#define MX50_PAD_OWIRE__OWIRE_LINE				0x060 0x30c 0x000 0x0 0x0
+#define MX50_PAD_OWIRE__GPIO6_26				0x060 0x30c 0x000 0x1 0x0
+#define MX50_PAD_OWIRE__USBOH1_USBH1_OC				0x060 0x30c 0x000 0x2 0x0
+#define MX50_PAD_OWIRE__CCM_SSI_EXT1_CLK			0x060 0x30c 0x000 0x3 0x0
+#define MX50_PAD_OWIRE__EPDC_PWRIRQ				0x060 0x30c 0x000 0x4 0x0
+#define MX50_PAD_OWIRE__GPT_CMPOUT3				0x060 0x30c 0x000 0x5 0x0
+#define MX50_PAD_OWIRE__OBSERVE_MUX_OBSRV_INT_OUT4		0x060 0x30c 0x000 0x6 0x0
+#define MX50_PAD_OWIRE__SJC_JTAG_ACT				0x060 0x30c 0x000 0x7 0x0
+#define MX50_PAD_EPITO__EPIT1_EPITO				0x064 0x310 0x000 0x0 0x0
+#define MX50_PAD_EPITO__GPIO6_27				0x064 0x310 0x000 0x1 0x0
+#define MX50_PAD_EPITO__USBOH1_USBH1_PWR			0x064 0x310 0x000 0x2 0x0
+#define MX50_PAD_EPITO__CCM_SSI_EXT2_CLK			0x064 0x310 0x000 0x3 0x0
+#define MX50_PAD_EPITO__DPLLIP1_TOG_EN				0x064 0x310 0x000 0x4 0x0
+#define MX50_PAD_EPITO__GPT_CLK_IN				0x064 0x310 0x000 0x5 0x0
+#define MX50_PAD_EPITO__PMU_IRQ_B				0x064 0x310 0x000 0x6 0x0
+#define MX50_PAD_EPITO__SJC_DE_B				0x064 0x310 0x000 0x7 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_B				0x068 0x314 0x000 0x0 0x0
+#define MX50_PAD_WDOG__GPIO6_28					0x068 0x314 0x000 0x1 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_RST_B_DEB			0x068 0x314 0x000 0x2 0x0
+#define MX50_PAD_WDOG__CCM_XTAL32K				0x068 0x314 0x000 0x6 0x0
+#define MX50_PAD_WDOG__SJC_DONE					0x068 0x314 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXFS__AUDMUX_AUD3_TXFS			0x06c 0x318 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXFS__GPIO6_0				0x06c 0x318 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXFS__SRC_BT_FUSE_RSV_1			0x06c 0x318 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXFS__USBPHY1_DATAOUT_8			0x06c 0x318 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXC__AUDMUX_AUD3_TXC			0x070 0x31c 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXC__GPIO6_1				0x070 0x31c 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXC__SRC_BT_FUSE_RSV_0			0x070 0x31c 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXC__USBPHY1_DATAOUT_9			0x070 0x31c 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXD__AUDMUX_AUD3_TXD			0x074 0x320 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXD__GPIO6_2				0x074 0x320 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXD__CSPI_RDY				0x074 0x320 0x6e8 0x4 0x0
+#define MX50_PAD_SSI_TXD__USBPHY1_DATAOUT_10			0x074 0x320 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXD__AUDMUX_AUD3_RXD			0x078 0x324 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXD__GPIO6_3				0x078 0x324 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXD__CSPI_SS3				0x078 0x324 0x6f4 0x4 0x0
+#define MX50_PAD_SSI_RXD__USBPHY1_DATAOUT_11			0x078 0x324 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXFS__AUDMUX_AUD3_RXFS			0x07c 0x328 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXFS__GPIO6_4				0x07c 0x328 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXFS__UART5_TXD_MUX			0x07c 0x328 0x7e4 0x2 0x0
+#define MX50_PAD_SSI_RXFS__EIM_WEIM_D_6				0x07c 0x328 0x804 0x3 0x0
+#define MX50_PAD_SSI_RXFS__CSPI_SS2				0x07c 0x328 0x6f0 0x4 0x0
+#define MX50_PAD_SSI_RXFS__FEC_COL				0x07c 0x328 0x770 0x5 0x0
+#define MX50_PAD_SSI_RXFS__FEC_MDC				0x07c 0x328 0x000 0x6 0x0
+#define MX50_PAD_SSI_RXFS__USBPHY1_DATAOUT_12			0x07c 0x328 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXC__AUDMUX_AUD3_RXC			0x080 0x32c 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXC__GPIO6_5				0x080 0x32c 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXC__UART5_RXD_MUX				0x080 0x32c 0x7e4 0x2 0x1
+#define MX50_PAD_SSI_RXC__EIM_WEIM_D_7				0x080 0x32c 0x808 0x3 0x0
+#define MX50_PAD_SSI_RXC__CSPI_SS1				0x080 0x32c 0x6ec 0x4 0x0
+#define MX50_PAD_SSI_RXC__FEC_RX_CLK				0x080 0x32c 0x780 0x5 0x0
+#define MX50_PAD_SSI_RXC__FEC_MDIO				0x080 0x32c 0x774 0x6 0x1
+#define MX50_PAD_SSI_RXC__USBPHY1_DATAOUT_13			0x080 0x32c 0x000 0x7 0x0
+#define MX50_PAD_UART1_TXD__UART1_TXD_MUX			0x084 0x330 0x7c4 0x0 0x0
+#define MX50_PAD_UART1_TXD__GPIO6_6				0x084 0x330 0x000 0x1 0x0
+#define MX50_PAD_UART1_TXD__USBPHY1_DATAOUT_14			0x084 0x330 0x000 0x7 0x0
+#define MX50_PAD_UART1_RXD__UART1_RXD_MUX			0x088 0x334 0x7c4 0x0 0x1
+#define MX50_PAD_UART1_RXD__GPIO6_7				0x088 0x334 0x000 0x1 0x0
+#define MX50_PAD_UART1_RXD__USBPHY1_DATAOUT_15			0x088 0x334 0x000 0x7 0x0
+#define MX50_PAD_UART1_CTS__UART1_CTS				0x08c 0x338 0x000 0x0 0x0
+#define MX50_PAD_UART1_CTS__GPIO6_8				0x08c 0x338 0x000 0x1 0x0
+#define MX50_PAD_UART1_CTS__UART5_TXD_MUX			0x08c 0x338 0x7e4 0x2 0x2
+#define MX50_PAD_UART1_CTS__ESDHC4_DAT4				0x08c 0x338 0x760 0x4 0x0
+#define MX50_PAD_UART1_CTS__ESDHC4_CMD				0x08c 0x338 0x74c 0x5 0x0
+#define MX50_PAD_UART1_CTS__USBPHY2_DATAOUT_8			0x08c 0x338 0x000 0x7 0x0
+#define MX50_PAD_UART1_RTS__UART1_RTS				0x090 0x33c 0x7c0 0x0 0x3
+#define MX50_PAD_UART1_RTS__GPIO6_9				0x090 0x33c 0x000 0x1 0x0
+#define MX50_PAD_UART1_RTS__UART5_RXD_MUX			0x090 0x33c 0x7e4 0x2 0x3
+#define MX50_PAD_UART1_RTS__ESDHC4_DAT5				0x090 0x33c 0x764 0x4 0x0
+#define MX50_PAD_UART1_RTS__ESDHC4_CLK				0x090 0x33c 0x748 0x5 0x0
+#define MX50_PAD_UART1_RTS__USBPHY2_DATAOUT_9			0x090 0x33c 0x000 0x7 0x0
+#define MX50_PAD_UART2_TXD__UART2_TXD_MUX			0x094 0x340 0x7cc 0x0 0x2
+#define MX50_PAD_UART2_TXD__GPIO6_10				0x094 0x340 0x000 0x1 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT6				0x094 0x340 0x768 0x4 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT4				0x094 0x340 0x760 0x5 0x1
+#define MX50_PAD_UART2_TXD__USBPHY2_DATAOUT_10			0x094 0x340 0x000 0x7 0x0
+#define MX50_PAD_UART2_RXD__UART2_RXD_MUX			0x098 0x344 0x7cc 0x0 0x3
+#define MX50_PAD_UART2_RXD__GPIO6_11				0x098 0x344 0x000 0x1 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT7				0x098 0x344 0x76c 0x4 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT5				0x098 0x344 0x764 0x5 0x1
+#define MX50_PAD_UART2_RXD__USBPHY2_DATAOUT_11			0x098 0x344 0x000 0x7 0x0
+#define MX50_PAD_UART2_CTS__UART2_CTS				0x09c 0x348 0x000 0x0 0x0
+#define MX50_PAD_UART2_CTS__GPIO6_12				0x09c 0x348 0x000 0x1 0x0
+#define MX50_PAD_UART2_CTS__ESDHC4_CMD				0x09c 0x348 0x74c 0x4 0x1
+#define MX50_PAD_UART2_CTS__ESDHC4_DAT6				0x09c 0x348 0x768 0x5 0x1
+#define MX50_PAD_UART2_CTS__USBPHY2_DATAOUT_12			0x09c 0x348 0x000 0x7 0x0
+#define MX50_PAD_UART2_RTS__UART2_RTS				0x0a0 0x34c 0x7c8 0x0 0x2
+#define MX50_PAD_UART2_RTS__GPIO6_13				0x0a0 0x34c 0x000 0x1 0x0
+#define MX50_PAD_UART2_RTS__ESDHC4_CLK				0x0a0 0x34c 0x748 0x4 0x1
+#define MX50_PAD_UART2_RTS__ESDHC4_DAT7				0x0a0 0x34c 0x76c 0x5 0x1
+#define MX50_PAD_UART2_RTS__USBPHY2_DATAOUT_13			0x0a0 0x34c 0x000 0x7 0x0
+#define MX50_PAD_UART3_TXD__UART3_TXD_MUX			0x0a4 0x350 0x7d4 0x0 0x0
+#define MX50_PAD_UART3_TXD__GPIO6_14				0x0a4 0x350 0x000 0x1 0x0
+#define MX50_PAD_UART3_TXD__ESDHC1_DAT4				0x0a4 0x350 0x000 0x3 0x0
+#define MX50_PAD_UART3_TXD__ESDHC4_DAT0				0x0a4 0x350 0x000 0x4 0x0
+#define MX50_PAD_UART3_TXD__ESDHC2_WP				0x0a4 0x350 0x744 0x5 0x0
+#define MX50_PAD_UART3_TXD__EIM_WEIM_D_12			0x0a4 0x350 0x81c 0x6 0x0
+#define MX50_PAD_UART3_TXD__USBPHY2_DATAOUT_14			0x0a4 0x350 0x000 0x7 0x0
+#define MX50_PAD_UART3_RXD__UART3_RXD_MUX			0x0a8 0x354 0x7d4 0x0 0x1
+#define MX50_PAD_UART3_RXD__GPIO6_15				0x0a8 0x354 0x000 0x1 0x0
+#define MX50_PAD_UART3_RXD__ESDHC1_DAT5				0x0a8 0x354 0x000 0x3 0x0
+#define MX50_PAD_UART3_RXD__ESDHC4_DAT1				0x0a8 0x354 0x754 0x4 0x0
+#define MX50_PAD_UART3_RXD__ESDHC2_CD				0x0a8 0x354 0x740 0x5 0x0
+#define MX50_PAD_UART3_RXD__EIM_WEIM_D_13			0x0a8 0x354 0x820 0x6 0x0
+#define MX50_PAD_UART3_RXD__USBPHY2_DATAOUT_15			0x0a8 0x354 0x000 0x7 0x0
+#define MX50_PAD_UART4_TXD__UART4_TXD_MUX			0x0ac 0x358 0x7dc 0x0 0x0
+#define MX50_PAD_UART4_TXD__GPIO6_16				0x0ac 0x358 0x000 0x1 0x0
+#define MX50_PAD_UART4_TXD__UART3_CTS				0x0ac 0x358 0x7d0 0x2 0x0
+#define MX50_PAD_UART4_TXD__ESDHC1_DAT6				0x0ac 0x358 0x000 0x3 0x0
+#define MX50_PAD_UART4_TXD__ESDHC4_DAT2				0x0ac 0x358 0x758 0x4 0x0
+#define MX50_PAD_UART4_TXD__ESDHC2_LCTL				0x0ac 0x358 0x000 0x5 0x0
+#define MX50_PAD_UART4_TXD__EIM_WEIM_D_14			0x0ac 0x358 0x824 0x6 0x0
+#define MX50_PAD_UART4_RXD__UART4_RXD_MUX			0x0b0 0x35c 0x7dc 0x0 0x1
+#define MX50_PAD_UART4_RXD__GPIO6_17				0x0b0 0x35c 0x000 0x1 0x0
+#define MX50_PAD_UART4_RXD__UART3_RTS				0x0b0 0x35c 0x7d0 0x2 0x1
+#define MX50_PAD_UART4_RXD__ESDHC1_DAT7				0x0b0 0x35c 0x000 0x3 0x0
+#define MX50_PAD_UART4_RXD__ESDHC4_DAT3				0x0b0 0x35c 0x75c 0x4 0x0
+#define MX50_PAD_UART4_RXD__ESDHC1_LCTL				0x0b0 0x35c 0x000 0x5 0x0
+#define MX50_PAD_UART4_RXD__EIM_WEIM_D_15			0x0b0 0x35c 0x828 0x6 0x0
+#define MX50_PAD_CSPI_SCLK__CSPI_SCLK				0x0b4 0x360 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SCLK__GPIO4_8				0x0b4 0x360 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MOSI__CSPI_MOSI				0x0b8 0x364 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MOSI__GPIO4_9				0x0b8 0x364 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MISO__CSPI_MISO				0x0bc 0x368 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MISO__GPIO4_10				0x0bc 0x368 0x000 0x1 0x0
+#define MX50_PAD_CSPI_SS0__CSPI_SS0				0x0c0 0x36c 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SS0__GPIO4_11				0x0c0 0x36c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK			0x0c4 0x370 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SCLK__GPIO4_12				0x0c4 0x370 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY				0x0c4 0x370 0x6e8 0x2 0x1
+#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY			0x0c4 0x370 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SCLK__UART3_RTS				0x0c4 0x370 0x7d0 0x4 0x2
+#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE_6			0x0c4 0x370 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SCLK__EIM_WEIM_D_8			0x0c4 0x370 0x80c 0x7 0x0
+#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI			0x0c8 0x374 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MOSI__GPIO4_13				0x0c8 0x374 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1				0x0c8 0x374 0x6ec 0x2 0x1
+#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1			0x0c8 0x374 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MOSI__UART3_CTS				0x0c8 0x374 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE_7			0x0c8 0x374 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MOSI__EIM_WEIM_D_9			0x0c8 0x374 0x810 0x7 0x0
+#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO			0x0cc 0x378 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MISO__GPIO4_14				0x0cc 0x378 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MISO__CSPI_SS2				0x0cc 0x378 0x6f0 0x2 0x1
+#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2			0x0cc 0x378 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MISO__UART4_RTS				0x0cc 0x378 0x7d8 0x4 0x0
+#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE_8			0x0cc 0x378 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MISO__EIM_WEIM_D_10			0x0cc 0x378 0x814 0x7 0x0
+#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0				0x0d0 0x37c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SS0__GPIO4_15				0x0d0 0x37c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SS0__CSPI_SS3				0x0d0 0x37c 0x6f4 0x2 0x1
+#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3				0x0d0 0x37c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SS0__UART4_CTS				0x0d0 0x37c 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE_9			0x0d0 0x37c 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SS0__EIM_WEIM_D_11			0x0d0 0x37c 0x818 0x7 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK			0x0d4 0x380 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SCLK__GPIO4_16				0x0d4 0x380 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR_RWN			0x0d4 0x380 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY			0x0d4 0x380 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SCLK__UART5_RTS				0x0d4 0x380 0x7e0 0x4 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK			0x0d4 0x380 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_NANDF_CEN_4			0x0d4 0x380 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_WEIM_D_8			0x0d4 0x380 0x80c 0x7 0x1
+#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI			0x0d8 0x384 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MOSI__GPIO4_17				0x0d8 0x384 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RE_E			0x0d8 0x384 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1			0x0d8 0x384 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MOSI__UART5_CTS				0x0d8 0x384 0x7e0 0x4 0x1
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_ENABLE			0x0d8 0x384 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_NANDF_CEN_5			0x0d8 0x384 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_WEIM_D_9			0x0d8 0x384 0x810 0x7 0x1
+#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO			0x0dc 0x388 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MISO__GPIO4_18				0x0dc 0x388 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS				0x0dc 0x388 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2			0x0dc 0x388 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MISO__UART5_TXD_MUX			0x0dc 0x388 0x7e4 0x4 0x4
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC			0x0dc 0x388 0x73c 0x5 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_NANDF_CEN_6			0x0dc 0x388 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_WEIM_D_10			0x0dc 0x388 0x814 0x7 0x1
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0				0x0e0 0x38c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SS0__GPIO4_19				0x0e0 0x38c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS				0x0e0 0x38c 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS3				0x0e0 0x38c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SS0__UART5_RXD_MUX			0x0e0 0x38c 0x7e4 0x4 0x5
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC			0x0e0 0x38c 0x6f8 0x5 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_NANDF_CEN_7			0x0e0 0x38c 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_WEIM_D_11			0x0e0 0x38c 0x818 0x7 0x1
+#define MX50_PAD_SD1_CLK__ESDHC1_CLK				0x0e4 0x390 0x000 0x0 0x0
+#define MX50_PAD_SD1_CLK__GPIO5_0				0x0e4 0x390 0x000 0x1 0x0
+#define MX50_PAD_SD1_CLK__CCM_CLKO				0x0e4 0x390 0x000 0x7 0x0
+#define MX50_PAD_SD1_CMD__ESDHC1_CMD				0x0e8 0x394 0x000 0x0 0x0
+#define MX50_PAD_SD1_CMD__GPIO5_1				0x0e8 0x394 0x000 0x1 0x0
+#define MX50_PAD_SD1_CMD__CCM_CLKO2				0x0e8 0x394 0x000 0x7 0x0
+#define MX50_PAD_SD1_D0__ESDHC1_DAT0				0x0ec 0x398 0x000 0x0 0x0
+#define MX50_PAD_SD1_D0__GPIO5_2				0x0ec 0x398 0x000 0x1 0x0
+#define MX50_PAD_SD1_D0__CCM_PLL1_BYP				0x0ec 0x398 0x6dc 0x7 0x0
+#define MX50_PAD_SD1_D1__ESDHC1_DAT1				0x0f0 0x39c 0x000 0x0 0x0
+#define MX50_PAD_SD1_D1__GPIO5_3				0x0f0 0x39c 0x000 0x1 0x0
+#define MX50_PAD_SD1_D1__CCM_PLL2_BYP				0x0f0 0x39c 0x000 0x7 0x0
+#define MX50_PAD_SD1_D2__ESDHC1_DAT2				0x0f4 0x3a0 0x000 0x0 0x0
+#define MX50_PAD_SD1_D2__GPIO5_4				0x0f4 0x3a0 0x000 0x1 0x0
+#define MX50_PAD_SD1_D2__CCM_PLL3_BYP				0x0f4 0x3a0 0x6e4 0x7 0x0
+#define MX50_PAD_SD1_D3__ESDHC1_DAT3				0x0f8 0x3a4 0x000 0x0 0x0
+#define MX50_PAD_SD1_D3__GPIO5_5				0x0f8 0x3a4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__ESDHC2_CLK				0x0fc 0x3a8 0x000 0x0 0x0
+#define MX50_PAD_SD2_CLK__GPIO5_6				0x0fc 0x3a8 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__MSHC_SCLK				0x0fc 0x3a8 0x000 0x2 0x0
+#define MX50_PAD_SD2_CMD__ESDHC2_CMD				0x100 0x3ac 0x000 0x0 0x0
+#define MX50_PAD_SD2_CMD__GPIO5_7				0x100 0x3ac 0x000 0x1 0x0
+#define MX50_PAD_SD2_CMD__MSHC_BS				0x100 0x3ac 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__ESDHC2_DAT0				0x104 0x3b0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D0__GPIO5_8				0x104 0x3b0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D0__MSHC_DATA_0				0x104 0x3b0 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__KPP_COL_4				0x104 0x3b0 0x790 0x3 0x0
+#define MX50_PAD_SD2_D1__ESDHC2_DAT1				0x108 0x3b4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D1__GPIO5_9				0x108 0x3b4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D1__MSHC_DATA_1				0x108 0x3b4 0x000 0x2 0x0
+#define MX50_PAD_SD2_D1__KPP_ROW_4				0x108 0x3b4 0x7a0 0x3 0x0
+#define MX50_PAD_SD2_D2__ESDHC2_DAT2				0x10c 0x3b8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D2__GPIO5_10				0x10c 0x3b8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D2__MSHC_DATA_2				0x10c 0x3b8 0x000 0x2 0x0
+#define MX50_PAD_SD2_D2__KPP_COL_5				0x10c 0x3b8 0x794 0x3 0x0
+#define MX50_PAD_SD2_D3__ESDHC2_DAT3				0x110 0x3bc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D3__GPIO5_11				0x110 0x3bc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D3__MSHC_DATA_3				0x110 0x3bc 0x000 0x2 0x0
+#define MX50_PAD_SD2_D3__KPP_ROW_5				0x110 0x3bc 0x7a4 0x3 0x0
+#define MX50_PAD_SD2_D4__ESDHC2_DAT4				0x114 0x3c0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D4__GPIO5_12				0x114 0x3c0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D4__AUDMUX_AUD4_RXFS			0x114 0x3c0 0x6d0 0x2 0x0
+#define MX50_PAD_SD2_D4__KPP_COL_6				0x114 0x3c0 0x798 0x3 0x0
+#define MX50_PAD_SD2_D4__EIM_WEIM_D_0				0x114 0x3c0 0x7ec 0x4 0x0
+#define MX50_PAD_SD2_D4__CCM_CCM_OUT_0				0x114 0x3c0 0x000 0x7 0x0
+#define MX50_PAD_SD2_D5__ESDHC2_DAT5				0x118 0x3c4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D5__GPIO5_13				0x118 0x3c4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D5__AUDMUX_AUD4_RXC			0x118 0x3c4 0x6cc 0x2 0x0
+#define MX50_PAD_SD2_D5__KPP_ROW_6				0x118 0x3c4 0x7a8 0x3 0x0
+#define MX50_PAD_SD2_D5__EIM_WEIM_D_1				0x118 0x3c4 0x7f0 0x4 0x0
+#define MX50_PAD_SD2_D5__CCM_CCM_OUT_1				0x118 0x3c4 0x000 0x7 0x0
+#define MX50_PAD_SD2_D6__ESDHC2_DAT6				0x11c 0x3c8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D6__GPIO5_14				0x11c 0x3c8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D6__AUDMUX_AUD4_RXD			0x11c 0x3c8 0x6c4 0x2 0x0
+#define MX50_PAD_SD2_D6__KPP_COL_7				0x11c 0x3c8 0x79c 0x3 0x0
+#define MX50_PAD_SD2_D6__EIM_WEIM_D_2				0x11c 0x3c8 0x7f4 0x4 0x0
+#define MX50_PAD_SD2_D6__CCM_CCM_OUT_2				0x11c 0x3c8 0x000 0x7 0x0
+#define MX50_PAD_SD2_D7__ESDHC2_DAT7				0x120 0x3cc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D7__GPIO5_15				0x120 0x3cc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D7__AUDMUX_AUD4_TXFS			0x120 0x3cc 0x6d8 0x2 0x0
+#define MX50_PAD_SD2_D7__KPP_ROW_7				0x120 0x3cc 0x7ac 0x3 0x0
+#define MX50_PAD_SD2_D7__EIM_WEIM_D_3				0x120 0x3cc 0x7f8 0x4 0x0
+#define MX50_PAD_SD2_D7__CCM_STOP				0x120 0x3cc 0x000 0x7 0x0
+#define MX50_PAD_SD2_WP__ESDHC2_WP				0x124 0x3d0 0x744 0x0 0x1
+#define MX50_PAD_SD2_WP__GPIO5_16				0x124 0x3d0 0x000 0x1 0x0
+#define MX50_PAD_SD2_WP__AUDMUX_AUD4_TXD			0x124 0x3d0 0x6c8 0x2 0x0
+#define MX50_PAD_SD2_WP__EIM_WEIM_D_4				0x124 0x3d0 0x7fc 0x4 0x0
+#define MX50_PAD_SD2_WP__CCM_WAIT				0x124 0x3d0 0x000 0x7 0x0
+#define MX50_PAD_SD2_CD__ESDHC2_CD				0x128 0x3d4 0x740 0x0 0x1
+#define MX50_PAD_SD2_CD__GPIO5_17				0x128 0x3d4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CD__AUDMUX_AUD4_TXC			0x128 0x3d4 0x6d4 0x2 0x0
+#define MX50_PAD_SD2_CD__EIM_WEIM_D_5				0x128 0x3d4 0x800 0x4 0x0
+#define MX50_PAD_SD2_CD__CCM_REF_EN_B				0x128 0x3d4 0x000 0x7 0x0
+#define MX50_PAD_DISP_D0__ELCDIF_DAT_0				0x12c 0x40c 0x6fc 0x0 0x0
+#define MX50_PAD_DISP_D0__GPIO2_0				0x12c 0x40c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D0__FEC_TX_CLK				0x12c 0x40c 0x78c 0x2 0x0
+#define MX50_PAD_DISP_D0__EIM_WEIM_A_16				0x12c 0x40c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D0__SDMA_DEBUG_PC_0			0x12c 0x40c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D0__USBPHY1_VSTATUS_0			0x12c 0x40c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D1__ELCDIF_DAT_1				0x130 0x410 0x700 0x0 0x0
+#define MX50_PAD_DISP_D1__GPIO2_1				0x130 0x410 0x000 0x1 0x0
+#define MX50_PAD_DISP_D1__FEC_RX_ERR				0x130 0x410 0x788 0x2 0x0
+#define MX50_PAD_DISP_D1__EIM_WEIM_A_17				0x130 0x410 0x000 0x3 0x0
+#define MX50_PAD_DISP_D1__SDMA_DEBUG_PC_1			0x130 0x410 0x000 0x6 0x0
+#define MX50_PAD_DISP_D1__USBPHY1_VSTATUS_1			0x130 0x410 0x000 0x7 0x0
+#define MX50_PAD_DISP_D2__ELCDIF_DAT_2				0x134 0x414 0x704 0x0 0x0
+#define MX50_PAD_DISP_D2__GPIO2_2				0x134 0x414 0x000 0x1 0x0
+#define MX50_PAD_DISP_D2__FEC_RX_DV				0x134 0x414 0x784 0x2 0x0
+#define MX50_PAD_DISP_D2__EIM_WEIM_A_18				0x134 0x414 0x000 0x3 0x0
+#define MX50_PAD_DISP_D2__SDMA_DEBUG_PC_2			0x134 0x414 0x000 0x6 0x0
+#define MX50_PAD_DISP_D2__USBPHY1_VSTATUS_2			0x134 0x414 0x000 0x7 0x0
+#define MX50_PAD_DISP_D3__ELCDIF_DAT_3				0x138 0x418 0x708 0x0 0x0
+#define MX50_PAD_DISP_D3__GPIO2_3				0x138 0x418 0x000 0x1 0x0
+#define MX50_PAD_DISP_D3__FEC_RDATA_1				0x138 0x418 0x77c 0x2 0x0
+#define MX50_PAD_DISP_D3__EIM_WEIM_A_19				0x138 0x418 0x000 0x3 0x0
+#define MX50_PAD_DISP_D3__FEC_COL				0x138 0x418 0x770 0x4 0x1
+#define MX50_PAD_DISP_D3__SDMA_DEBUG_PC_3			0x138 0x418 0x000 0x6 0x0
+#define MX50_PAD_DISP_D3__USBPHY1_VSTATUS_3			0x138 0x418 0x000 0x7 0x0
+#define MX50_PAD_DISP_D4__ELCDIF_DAT_4				0x13c 0x41c 0x70c 0x0 0x0
+#define MX50_PAD_DISP_D4__GPIO2_4				0x13c 0x41c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D4__FEC_RDATA_0				0x13c 0x41c 0x778 0x2 0x0
+#define MX50_PAD_DISP_D4__EIM_WEIM_A_20				0x13c 0x41c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D4__SDMA_DEBUG_PC_4			0x13c 0x41c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D4__USBPHY1_VSTATUS_4			0x13c 0x41c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D5__ELCDIF_DAT_5				0x140 0x420 0x710 0x0 0x0
+#define MX50_PAD_DISP_D5__GPIO2_5				0x140 0x420 0x000 0x1 0x0
+#define MX50_PAD_DISP_D5__FEC_TX_EN				0x140 0x420 0x000 0x2 0x0
+#define MX50_PAD_DISP_D5__EIM_WEIM_A_21				0x140 0x420 0x000 0x3 0x0
+#define MX50_PAD_DISP_D5__SDMA_DEBUG_PC_5			0x140 0x420 0x000 0x6 0x0
+#define MX50_PAD_DISP_D5__USBPHY1_VSTATUS_5			0x140 0x420 0x000 0x7 0x0
+#define MX50_PAD_DISP_D6__ELCDIF_DAT_6				0x144 0x424 0x714 0x0 0x0
+#define MX50_PAD_DISP_D6__GPIO2_6				0x144 0x424 0x000 0x1 0x0
+#define MX50_PAD_DISP_D6__FEC_TDATA_1				0x144 0x424 0x000 0x2 0x0
+#define MX50_PAD_DISP_D6__EIM_WEIM_A_22				0x144 0x424 0x000 0x3 0x0
+#define MX50_PAD_DISP_D6__FEC_RX_CLK				0x144 0x424 0x780 0x4 0x1
+#define MX50_PAD_DISP_D6__SDMA_DEBUG_PC_6			0x144 0x424 0x000 0x6 0x0
+#define MX50_PAD_DISP_D6__USBPHY1_VSTATUS_6			0x144 0x424 0x000 0x7 0x0
+#define MX50_PAD_DISP_D7__ELCDIF_DAT_7				0x148 0x428 0x718 0x0 0x0
+#define MX50_PAD_DISP_D7__GPIO2_7				0x148 0x428 0x000 0x1 0x0
+#define MX50_PAD_DISP_D7__FEC_TDATA_0				0x148 0x428 0x000 0x2 0x0
+#define MX50_PAD_DISP_D7__EIM_WEIM_A_23				0x148 0x428 0x000 0x3 0x0
+#define MX50_PAD_DISP_D7__SDMA_DEBUG_PC_7			0x148 0x428 0x000 0x6 0x0
+#define MX50_PAD_DISP_D7__USBPHY1_VSTATUS_7			0x148 0x428 0x000 0x7 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_WR_RWN				0x14c 0x42c 0x000 0x0 0x0
+#define MX50_PAD_DISP_WR__GPIO2_16				0x14c 0x42c 0x000 0x1 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_DOTCLK				0x14c 0x42c 0x000 0x2 0x0
+#define MX50_PAD_DISP_WR__EIM_WEIM_A_24				0x14c 0x42c 0x000 0x3 0x0
+#define MX50_PAD_DISP_WR__SDMA_DEBUG_PC_8			0x14c 0x42c 0x000 0x6 0x0
+#define MX50_PAD_DISP_WR__USBPHY1_AVALID			0x14c 0x42c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_RD_E				0x150 0x430 0x000 0x0 0x0
+#define MX50_PAD_DISP_RD__GPIO2_19				0x150 0x430 0x000 0x1 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_ENABLE				0x150 0x430 0x000 0x2 0x0
+#define MX50_PAD_DISP_RD__EIM_WEIM_A_25				0x150 0x430 0x000 0x3 0x0
+#define MX50_PAD_DISP_RD__SDMA_DEBUG_PC_9			0x150 0x430 0x000 0x6 0x0
+#define MX50_PAD_DISP_RD__USBPHY1_BVALID			0x150 0x430 0x000 0x7 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_RS				0x154 0x434 0x000 0x0 0x0
+#define MX50_PAD_DISP_RS__GPIO2_17				0x154 0x434 0x000 0x1 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_VSYNC				0x154 0x434 0x73c 0x2 0x1
+#define MX50_PAD_DISP_RS__EIM_WEIM_A_26				0x154 0x434 0x000 0x3 0x0
+#define MX50_PAD_DISP_RS__SDMA_DEBUG_PC_10			0x154 0x434 0x000 0x6 0x0
+#define MX50_PAD_DISP_RS__USBPHY1_ENDSESSION			0x154 0x434 0x000 0x7 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_CS				0x158 0x438 0x000 0x0 0x0
+#define MX50_PAD_DISP_CS__GPIO2_21				0x158 0x438 0x000 0x1 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_HSYNC				0x158 0x438 0x6f8 0x2 0x1
+#define MX50_PAD_DISP_CS__EIM_WEIM_A_27				0x158 0x438 0x000 0x3 0x0
+#define MX50_PAD_DISP_CS__EIM_WEIM_CS_3				0x158 0x438 0x000 0x4 0x0
+#define MX50_PAD_DISP_CS__SDMA_DEBUG_PC_11			0x158 0x438 0x000 0x6 0x0
+#define MX50_PAD_DISP_CS__USBPHY1_IDDIG				0x158 0x438 0x000 0x7 0x0
+#define MX50_PAD_DISP_BUSY__ELCDIF_BUSY				0x15c 0x43c 0x6f8 0x0 0x2
+#define MX50_PAD_DISP_BUSY__GPIO2_18				0x15c 0x43c 0x000 0x1 0x0
+#define MX50_PAD_DISP_BUSY__EIM_WEIM_CS_3			0x15c 0x43c 0x000 0x4 0x0
+#define MX50_PAD_DISP_BUSY__SDMA_DEBUG_PC_12			0x15c 0x43c 0x000 0x6 0x0
+#define MX50_PAD_DISP_BUSY__USBPHY2_HOSTDISCONNECT		0x15c 0x43c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RESET__ELCDIF_RESET			0x160 0x440 0x000 0x0 0x0
+#define MX50_PAD_DISP_RESET__GPIO2_20				0x160 0x440 0x000 0x1 0x0
+#define MX50_PAD_DISP_RESET__EIM_WEIM_CS_3			0x160 0x440 0x000 0x4 0x0
+#define MX50_PAD_DISP_RESET__SDMA_DEBUG_PC_13			0x160 0x440 0x000 0x6 0x0
+#define MX50_PAD_DISP_RESET__USBPHY2_BISTOK			0x160 0x440 0x000 0x7 0x0
+#define MX50_PAD_SD3_CMD__ESDHC3_CMD				0x164 0x444 0x000 0x0 0x0
+#define MX50_PAD_SD3_CMD__GPIO5_18				0x164 0x444 0x000 0x1 0x0
+#define MX50_PAD_SD3_CMD__EIM_NANDF_WRN				0x164 0x444 0x000 0x2 0x0
+#define MX50_PAD_SD3_CMD__SSP_CMD				0x164 0x444 0x000 0x3 0x0
+#define MX50_PAD_SD3_CLK__ESDHC3_CLK				0x168 0x448 0x000 0x0 0x0
+#define MX50_PAD_SD3_CLK__GPIO5_19				0x168 0x448 0x000 0x1 0x0
+#define MX50_PAD_SD3_CLK__EIM_NANDF_RDN				0x168 0x448 0x000 0x2 0x0
+#define MX50_PAD_SD3_CLK__SSP_CLK				0x168 0x448 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__ESDHC3_DAT0				0x16c 0x44c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D0__GPIO5_20				0x16c 0x44c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D0__EIM_NANDF_D_4				0x16c 0x44c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D0__SSP_D0					0x16c 0x44c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__CCM_PLL1_BYP				0x16c 0x44c 0x6dc 0x7 0x1
+#define MX50_PAD_SD3_D1__ESDHC3_DAT1				0x170 0x450 0x000 0x0 0x0
+#define MX50_PAD_SD3_D1__GPIO5_21				0x170 0x450 0x000 0x1 0x0
+#define MX50_PAD_SD3_D1__EIM_NANDF_D_5				0x170 0x450 0x000 0x2 0x0
+#define MX50_PAD_SD3_D1__SSP_D1					0x170 0x450 0x000 0x3 0x0
+#define MX50_PAD_SD3_D1__CCM_PLL2_BYP				0x170 0x450 0x000 0x7 0x0
+#define MX50_PAD_SD3_D2__ESDHC3_DAT2				0x174 0x454 0x000 0x0 0x0
+#define MX50_PAD_SD3_D2__GPIO5_22				0x174 0x454 0x000 0x1 0x0
+#define MX50_PAD_SD3_D2__EIM_NANDF_D_6				0x174 0x454 0x000 0x2 0x0
+#define MX50_PAD_SD3_D2__SSP_D2					0x174 0x454 0x000 0x3 0x0
+#define MX50_PAD_SD3_D2__CCM_PLL3_BYP				0x174 0x454 0x6e4 0x7 0x1
+#define MX50_PAD_SD3_D3__ESDHC3_DAT3				0x178 0x458 0x000 0x0 0x0
+#define MX50_PAD_SD3_D3__GPIO5_23				0x178 0x458 0x000 0x1 0x0
+#define MX50_PAD_SD3_D3__EIM_NANDF_D_7				0x178 0x458 0x000 0x2 0x0
+#define MX50_PAD_SD3_D3__SSP_D3					0x178 0x458 0x000 0x3 0x0
+#define MX50_PAD_SD3_D4__ESDHC3_DAT4				0x17c 0x45c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D4__GPIO5_24				0x17c 0x45c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D4__EIM_NANDF_D_0				0x17c 0x45c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D4__SSP_D4					0x17c 0x45c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D5__ESDHC3_DAT5				0x180 0x460 0x000 0x0 0x0
+#define MX50_PAD_SD3_D5__GPIO5_25				0x180 0x460 0x000 0x1 0x0
+#define MX50_PAD_SD3_D5__EIM_NANDF_D_1				0x180 0x460 0x000 0x2 0x0
+#define MX50_PAD_SD3_D5__SSP_D5					0x180 0x460 0x000 0x3 0x0
+#define MX50_PAD_SD3_D6__ESDHC3_DAT6				0x184 0x464 0x000 0x0 0x0
+#define MX50_PAD_SD3_D6__GPIO5_26				0x184 0x464 0x000 0x1 0x0
+#define MX50_PAD_SD3_D6__EIM_NANDF_D_2				0x184 0x464 0x000 0x2 0x0
+#define MX50_PAD_SD3_D6__SSP_D6					0x184 0x464 0x000 0x3 0x0
+#define MX50_PAD_SD3_D7__ESDHC3_DAT7				0x188 0x468 0x000 0x0 0x0
+#define MX50_PAD_SD3_D7__GPIO5_27				0x188 0x468 0x000 0x1 0x0
+#define MX50_PAD_SD3_D7__EIM_NANDF_D_3				0x188 0x468 0x000 0x2 0x0
+#define MX50_PAD_SD3_D7__SSP_D7					0x188 0x468 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC3_WP				0x18c 0x46C 0x000 0x0 0x0
+#define MX50_PAD_SD3_WP__GPIO5_28				0x18c 0x46C 0x000 0x1 0x0
+#define MX50_PAD_SD3_WP__EIM_NANDF_RESETN			0x18c 0x46C 0x000 0x2 0x0
+#define MX50_PAD_SD3_WP__SSP_CD					0x18c 0x46C 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC4_LCTL				0x18c 0x46C 0x000 0x4 0x0
+#define MX50_PAD_SD3_WP__EIM_WEIM_CS_3				0x18c 0x46C 0x000 0x5 0x0
+#define MX50_PAD_DISP_D8__ELCDIF_DAT_8				0x190 0x470 0x71c 0x0 0x0
+#define MX50_PAD_DISP_D8__GPIO2_8				0x190 0x470 0x000 0x1 0x0
+#define MX50_PAD_DISP_D8__EIM_NANDF_CLE				0x190 0x470 0x000 0x2 0x0
+#define MX50_PAD_DISP_D8__ESDHC1_LCTL				0x190 0x470 0x000 0x3 0x0
+#define MX50_PAD_DISP_D8__ESDHC4_CMD				0x190 0x470 0x74c 0x4 0x2
+#define MX50_PAD_DISP_D8__KPP_COL_4				0x190 0x470 0x790 0x5 0x1
+#define MX50_PAD_DISP_D8__FEC_TX_CLK				0x190 0x470 0x78c 0x6 0x1
+#define MX50_PAD_DISP_D8__USBPHY1_DATAOUT_0			0x190 0x470 0x000 0x7 0x0
+#define MX50_PAD_DISP_D9__ELCDIF_DAT_9				0x194 0x474 0x720 0x0 0x0
+#define MX50_PAD_DISP_D9__GPIO2_9				0x194 0x474 0x000 0x1 0x0
+#define MX50_PAD_DISP_D9__EIM_NANDF_ALE				0x194 0x474 0x000 0x2 0x0
+#define MX50_PAD_DISP_D9__ESDHC2_LCTL				0x194 0x474 0x000 0x3 0x0
+#define MX50_PAD_DISP_D9__ESDHC4_CLK				0x194 0x474 0x748 0x4 0x2
+#define MX50_PAD_DISP_D9__KPP_ROW_4				0x194 0x474 0x7a0 0x5 0x1
+#define MX50_PAD_DISP_D9__FEC_RX_ER				0x194 0x474 0x788 0x6 0x1
+#define MX50_PAD_DISP_D9__USBPHY1_DATAOUT_1			0x194 0x474 0x000 0x7 0x0
+#define MX50_PAD_DISP_D10__ELCDIF_DAT_10			0x198 0x478 0x724 0x0 0x0
+#define MX50_PAD_DISP_D10__GPIO2_10				0x198 0x478 0x000 0x1 0x0
+#define MX50_PAD_DISP_D10__EIM_NANDF_CEN_0			0x198 0x478 0x000 0x2 0x0
+#define MX50_PAD_DISP_D10__ESDHC3_LCTL				0x198 0x478 0x000 0x3 0x0
+#define MX50_PAD_DISP_D10__ESDHC4_DAT0				0x198 0x478 0x000 0x4 0x0
+#define MX50_PAD_DISP_D10__KPP_COL_5				0x198 0x478 0x794 0x5 0x1
+#define MX50_PAD_DISP_D10__FEC_RX_DV				0x198 0x478 0x784 0x6 0x1
+#define MX50_PAD_DISP_D10__USBPHY1_DATAOUT_2			0x198 0x478 0x000 0x7 0x0
+#define MX50_PAD_DISP_D11__ELCDIF_DAT_11			0x19c 0x47c 0x728 0x0 0x0
+#define MX50_PAD_DISP_D11__GPIO2_11				0x19c 0x47c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D11__EIM_NANDF_CEN_1			0x19c 0x47c 0x000 0x2 0x0
+#define MX50_PAD_DISP_D11__ESDHC4_DAT1				0x19c 0x47c 0x754 0x4 0x1
+#define MX50_PAD_DISP_D11__KPP_ROW_5				0x19c 0x47c 0x7a4 0x5 0x1
+#define MX50_PAD_DISP_D11__FEC_RDATA_1				0x19c 0x47c 0x77c 0x6 0x1
+#define MX50_PAD_DISP_D11__USBPHY1_DATAOUT_3			0x19c 0x47c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D12__ELCDIF_DAT_12			0x1a0 0x480 0x72c 0x0 0x0
+#define MX50_PAD_DISP_D12__GPIO2_12				0x1a0 0x480 0x000 0x1 0x0
+#define MX50_PAD_DISP_D12__EIM_NANDF_CEN_2			0x1a0 0x480 0x000 0x2 0x0
+#define MX50_PAD_DISP_D12__ESDHC1_CD				0x1a0 0x480 0x000 0x3 0x0
+#define MX50_PAD_DISP_D12__ESDHC4_DAT2				0x1a0 0x480 0x758 0x4 0x1
+#define MX50_PAD_DISP_D12__KPP_COL_6				0x1a0 0x480 0x798 0x5 0x1
+#define MX50_PAD_DISP_D12__FEC_RDATA_0				0x1a0 0x480 0x778 0x6 0x1
+#define MX50_PAD_DISP_D12__USBPHY1_DATAOUT_4			0x1a0 0x480 0x000 0x7 0x0
+#define MX50_PAD_DISP_D13__ELCDIF_DAT_13			0x1a4 0x484 0x730 0x0 0x0
+#define MX50_PAD_DISP_D13__GPIO2_13				0x1a4 0x484 0x000 0x1 0x0
+#define MX50_PAD_DISP_D13__EIM_NANDF_CEN_3			0x1a4 0x484 0x000 0x2 0x0
+#define MX50_PAD_DISP_D13__ESDHC3_CD				0x1a4 0x484 0x000 0x3 0x0
+#define MX50_PAD_DISP_D13__ESDHC4_DAT3				0x1a4 0x484 0x75c 0x4 0x1
+#define MX50_PAD_DISP_D13__KPP_ROW_6				0x1a4 0x484 0x7a8 0x5 0x1
+#define MX50_PAD_DISP_D13__FEC_TX_EN				0x1a4 0x484 0x000 0x6 0x0
+#define MX50_PAD_DISP_D13__USBPHY1_DATAOUT_5			0x1a4 0x484 0x000 0x7 0x0
+#define MX50_PAD_DISP_D14__ELCDIF_DAT_14			0x1a8 0x488 0x734 0x0 0x0
+#define MX50_PAD_DISP_D14__GPIO2_14				0x1a8 0x488 0x000 0x1 0x0
+#define MX50_PAD_DISP_D14__EIM_NANDF_READY0			0x1a8 0x488 0x7b4 0x2 0x1
+#define MX50_PAD_DISP_D14__ESDHC1_WP				0x1a8 0x488 0x000 0x3 0x0
+#define MX50_PAD_DISP_D14__ESDHC4_WP				0x1a8 0x488 0x000 0x4 0x0
+#define MX50_PAD_DISP_D14__KPP_COL_7				0x1a8 0x488 0x79c 0x5 0x1
+#define MX50_PAD_DISP_D14__FEC_TDATA_1				0x1a8 0x488 0x000 0x6 0x0
+#define MX50_PAD_DISP_D14__USBPHY1_DATAOUT_6			0x1a8 0x488 0x000 0x7 0x0
+#define MX50_PAD_DISP_D15__ELCDIF_DAT_15			0x1ac 0x48c 0x738 0x0 0x0
+#define MX50_PAD_DISP_D15__GPIO2_15				0x1ac 0x48c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D15__EIM_NANDF_DQS			0x1ac 0x48c 0x7b0 0x2 0x1
+#define MX50_PAD_DISP_D15__ESDHC3_RST				0x1ac 0x48c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D15__ESDHC4_CD				0x1ac 0x48c 0x000 0x4 0x0
+#define MX50_PAD_DISP_D15__KPP_ROW_7				0x1ac 0x48c 0x7ac 0x5 0x1
+#define MX50_PAD_DISP_D15__FEC_TDATA_0				0x1ac 0x48c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D15__USBPHY1_DATAOUT_7			0x1ac 0x48c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D0__EPDC_SDDO_0				0x1b0 0x54c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D0__GPIO3_0				0x1b0 0x54c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D0__EIM_WEIM_D_0				0x1b0 0x54c 0x7ec 0x2 0x1
+#define MX50_PAD_EPDC_D0__ELCDIF_RS				0x1b0 0x54c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D0__ELCDIF_DOTCLK				0x1b0 0x54c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D0__SDMA_DEBUG_EVT_CHN_LINES_0		0x1b0 0x54c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D0__USBPHY2_DATAOUT_0			0x1b0 0x54c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D1__EPDC_SDDO_1				0x1b4 0x550 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D1__GPIO3_1				0x1b4 0x550 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D1__EIM_WEIM_D_1				0x1b4 0x550 0x7f0 0x2 0x1
+#define MX50_PAD_EPDC_D1__ELCDIF_CS				0x1b4 0x550 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D1__ELCDIF_ENABLE				0x1b4 0x550 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D1__SDMA_DEBUG_EVT_CHN_LINES_1		0x1b4 0x550 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D1__USBPHY2_DATAOUT_1			0x1b4 0x550 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D2__EPDC_SDDO_2				0x1b8 0x554 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D2__GPIO3_2				0x1b8 0x554 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D2__EIM_WEIM_D_2				0x1b8 0x554 0x7f4 0x2 0x1
+#define MX50_PAD_EPDC_D2__ELCDIF_WR_RWN				0x1b8 0x554 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC				0x1b8 0x554 0x73c 0x4 0x2
+#define MX50_PAD_EPDC_D2__SDMA_DEBUG_EVT_CHN_LINES_2		0x1b8 0x554 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D2__USBPHY2_DATAOUT_2			0x1b8 0x554 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D3__EPDC_SDDO_3				0x1bc 0x558 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D3__GPIO3_3				0x1bc 0x558 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D3__EIM_WEIM_D_3				0x1bc 0x558 0x7f8 0x2 0x1
+#define MX50_PAD_EPDC_D3__ELCDIF_RD_E				0x1bc 0x558 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC				0x1bc 0x558 0x6f8 0x4 0x3
+#define MX50_PAD_EPDC_D3__SDMA_DEBUG_EVT_CHN_LINES_3		0x1bc 0x558 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D3__USBPHY2_DATAOUT_3			0x1bc 0x558 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D4__EPDC_SDDO_4				0x1c0 0x55c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D4__GPIO3_4				0x1c0 0x55c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D4__EIM_WEIM_D_4				0x1c0 0x55c 0x7fc 0x2 0x1
+#define MX50_PAD_EPDC_D4__SDMA_DEBUG_EVT_CHN_LINES_4		0x1c0 0x55c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D4__USBPHY2_DATAOUT_4			0x1c0 0x55c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D5__EPDC_SDDO_5				0x1c4 0x560 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D5__GPIO3_5				0x1c4 0x560 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D5__EIM_WEIM_D_5				0x1c4 0x560 0x800 0x2 0x1
+#define MX50_PAD_EPDC_D5__SDMA_DEBUG_EVT_CHN_LINES_5		0x1c4 0x560 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D5__USBPHY2_DATAOUT_5			0x1c4 0x560 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D6__EPDC_SDDO_6				0x1c8 0x564 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D6__GPIO3_6				0x1c8 0x564 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D6__EIM_WEIM_D_6				0x1c8 0x564 0x804 0x2 0x1
+#define MX50_PAD_EPDC_D6__SDMA_DEBUG_EVT_CHN_LINES_6		0x1c8 0x564 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D6__USBPHY2_DATAOUT_6			0x1c8 0x564 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D7__EPDC_SDDO_7				0x1cc 0x568 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D7__GPIO3_7				0x1cc 0x568 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D7__EIM_WEIM_D_7				0x1cc 0x568 0x808 0x2 0x1
+#define MX50_PAD_EPDC_D7__SDMA_DEBUG_EVT_CHN_LINES_7		0x1cc 0x568 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D7__USBPHY2_DATAOUT_7			0x1cc 0x568 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D8__EPDC_SDDO_8				0x1d0 0x56c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D8__GPIO3_8				0x1d0 0x56c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D8__EIM_WEIM_D_8				0x1d0 0x56c 0x80c 0x2 0x2
+#define MX50_PAD_EPDC_D8__ELCDIF_DAT_24				0x1d0 0x56c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D8__SDMA_DEBUG_MATCHED_DMBUS		0x1d0 0x56c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D8__USBPHY2_VSTATUS_0			0x1d0 0x56c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D9__EPDC_SDDO_9				0x1d4 0x570 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D9__GPIO3_9				0x1d4 0x570 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D9__EIM_WEIM_D_9				0x1d4 0x570 0x810 0x2 0x2
+#define MX50_PAD_EPDC_D9__ELCDIF_DAT_25				0x1d4 0x570 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D9__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x1d4 0x570 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D9__USBPHY2_VSTATUS_1			0x1d4 0x570 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D10__EPDC_SDDO_10				0x1d8 0x574 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D10__GPIO3_10				0x1d8 0x574 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D10__EIM_WEIM_D_10			0x1d8 0x574 0x814 0x2 0x2
+#define MX50_PAD_EPDC_D10__ELCDIF_DAT_26			0x1d8 0x574 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D10__SDMA_DEBUG_EVENT_CHANNEL_0		0x1d8 0x574 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D10__USBPHY2_VSTATUS_2			0x1d8 0x574 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D11__EPDC_SDDO_11				0x1dc 0x578 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D11__GPIO3_11				0x1dc 0x578 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D11__EIM_WEIM_D_11			0x1dc 0x578 0x818 0x2 0x2
+#define MX50_PAD_EPDC_D11__ELCDIF_DAT_27			0x1dc 0x578 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D11__SDMA_DEBUG_EVENT_CHANNEL_1		0x1dc 0x578 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D11__USBPHY2_VSTATUS_3			0x1dc 0x578 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D12__EPDC_SDDO_12				0x1e0 0x57c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D12__GPIO3_12				0x1e0 0x57c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D12__EIM_WEIM_D_12			0x1e0 0x57c 0x81c 0x2 0x1
+#define MX50_PAD_EPDC_D12__ELCDIF_DAT_28			0x1e0 0x57c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D12__SDMA_DEBUG_EVENT_CHANNEL_2		0x1e0 0x57c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D12__USBPHY2_VSTATUS_4			0x1e0 0x57c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D13__EPDC_SDDO_13				0x1e4 0x580 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D13__GPIO3_13				0x1e4 0x580 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D13__EIM_WEIM_D_13			0x1e4 0x580 0x820 0x2 0x1
+#define MX50_PAD_EPDC_D13__ELCDIF_DAT_29			0x1e4 0x580 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D13__SDMA_DEBUG_EVENT_CHANNEL_3		0x1e4 0x580 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D13__USBPHY2_VSTATUS_5			0x1e4 0x580 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D14__EPDC_SDDO_14				0x1e8 0x584 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D14__GPIO3_14				0x1e8 0x584 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D14__EIM_WEIM_D_14			0x1e8 0x584 0x824 0x2 0x1
+#define MX50_PAD_EPDC_D14__ELCDIF_DAT_30			0x1e8 0x584 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D14__AUDMUX_AUD6_TXD			0x1e8 0x584 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D14__SDMA_DEBUG_EVENT_CHANNEL_4		0x1e8 0x584 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D14__USBPHY2_VSTATUS_6			0x1e8 0x584 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D15__EPDC_SDDO_15				0x1ec 0x588 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D15__GPIO3_15				0x1ec 0x588 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D15__EIM_WEIM_D_15			0x1ec 0x588 0x828 0x2 0x1
+#define MX50_PAD_EPDC_D15__ELCDIF_DAT_31			0x1ec 0x588 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D15__AUDMUX_AUD6_TXC			0x1ec 0x588 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D15__SDMA_DEBUG_EVENT_CHANNEL_5		0x1ec 0x588 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D15__USBPHY2_VSTATUS_7			0x1ec 0x588 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK				0x1f0 0x58c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDCLK__GPIO3_16				0x1f0 0x58c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDCLK__EIM_WEIM_D_16			0x1f0 0x58c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDCLK__ELCDIF_DAT_16			0x1f0 0x58c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDCLK__AUDMUX_AUD6_TXFS			0x1f0 0x58c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDCLK__SDMA_DEBUG_CORE_STATE_0		0x1f0 0x58c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDCLK__USBPHY2_BISTOK			0x1f0 0x58c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDSP__EPCD_GDSP				0x1f4 0x590 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDSP__GPIO3_17				0x1f4 0x590 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDSP__EIM_WEIM_D_17			0x1f4 0x590 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDSP__ELCDIF_DAT_17			0x1f4 0x590 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDSP__AUDMUX_AUD6_RXD			0x1f4 0x590 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDSP__SDMA_DEBUG_CORE_STATE_1		0x1f4 0x590 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDSP__USBPHY2_BVALID			0x1f4 0x590 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDOE__EPCD_GDOE				0x1f8 0x594 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDOE__GPIO3_18				0x1f8 0x594 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDOE__EIM_WEIM_D_18			0x1f8 0x594 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDOE__ELCDIF_DAT_18			0x1f8 0x594 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDOE__AUDMUX_AUD6_RXC			0x1f8 0x594 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDOE__SDMA_DEBUG_CORE_STATE_2		0x1f8 0x594 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDOE__USBPHY2_ENDSESSION			0x1f8 0x594 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDRL__EPCD_GDRL				0x1fc 0x598 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDRL__GPIO3_19				0x1fc 0x598 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDRL__EIM_WEIM_D_19			0x1f8 0x598 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDRL__ELCDIF_DAT_19			0x1fc 0x598 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDRL__AUDMUX_AUD6_RXFS			0x1fc 0x598 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDRL__SDMA_DEBUG_CORE_STATE_3		0x1fc 0x598 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDRL__USBPHY2_IDDIG			0x1fc 0x598 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLK__EPCD_SDCLK				0x200 0x59c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLK__GPIO3_20				0x200 0x59c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLK__EIM_WEIM_D_20			0x200 0x59c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLK__ELCDIF_DAT_20			0x200 0x59c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDCLK__AUDMUX_AUD5_TXD			0x200 0x59c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLK__SDMA_DEBUG_BUS_DEVICE_0		0x200 0x59c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLK__USBPHY2_HOSTDISCONNECT		0x200 0x59c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOEZ__EPCD_SDOEZ				0x204 0x5a0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOEZ__GPIO3_21				0x204 0x5a0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOEZ__EIM_WEIM_D_21			0x204 0x5a0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOEZ__ELCDIF_DAT_21			0x204 0x5a0 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOEZ__AUDMUX_AUD5_TXC			0x204 0x5a0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOEZ__SDMA_DEBUG_BUS_DEVICE_1		0x204 0x5a0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOEZ__USBPHY2_TXREADY			0x204 0x5a0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOED__EPCD_SDOED				0x208 0x5a4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOED__GPIO3_22				0x208 0x5a4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOED__EIM_WEIM_D_22			0x208 0x5a4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOED__ELCDIF_DAT_22			0x208 0x5a4 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOED__AUDMUX_AUD5_TXFS			0x208 0x5a4 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOED__SDMA_DEBUG_BUS_DEVICE_2		0x208 0x5a4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOED__USBPHY2_RXVALID			0x208 0x5a4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOE__EPCD_SDOE				0x20c 0x5a8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOE__GPIO3_23				0x20c 0x5a8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOE__EIM_WEIM_D_23			0x20c 0x5a8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOE__ELCDIF_DAT_23			0x20c 0x5a8 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOE__AUDMUX_AUD5_RXD			0x20c 0x5a8 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOE__SDMA_DEBUG_BUS_DEVICE_3		0x20c 0x5a8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOE__USBPHY2_RXACTIVE			0x20c 0x5a8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDLE__EPCD_SDLE				0x210 0x5ac 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDLE__GPIO3_24				0x210 0x5ac 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDLE__EIM_WEIM_D_24			0x210 0x5ac 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDLE__ELCDIF_DAT_8			0x210 0x5ac 0x71c 0x3 0x1
+#define MX50_PAD_EPDC_SDLE__AUDMUX_AUD5_RXC			0x210 0x5ac 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDLE__SDMA_DEBUG_BUS_DEVICE_4		0x210 0x5ac 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDLE__USBPHY2_RXERROR			0x210 0x5ac 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLKN__EPCD_SDCLKN			0x214 0x5b0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLKN__GPIO3_25				0x214 0x5b0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLKN__EIM_WEIM_D_25			0x214 0x5b0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLKN__ELCDIF_DAT_9			0x214 0x5b0 0x720 0x3 0x1
+#define MX50_PAD_EPDC_SDCLKN__AUDMUX_AUD5_RXFS			0x214 0x5b0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLKN__SDMA_DEBUG_BUS_ERROR		0x214 0x5b0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLKN__USBPHY2_SIECLOCK			0x214 0x5b0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDSHR__EPCD_SDSHR				0x218 0x5b4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDSHR__GPIO3_26				0x218 0x5b4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDSHR__EIM_WEIM_D_26			0x218 0x5b4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDSHR__ELCDIF_DAT_10			0x218 0x5b4 0x724 0x3 0x1
+#define MX50_PAD_EPDC_SDSHR__AUDMUX_AUD4_TXD			0x218 0x5b4 0x6c8 0x4 0x1
+#define MX50_PAD_EPDC_SDSHR__SDMA_DEBUG_BUS_RWB			0x218 0x5b4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDSHR__USBPHY2_LINESTATE_0		0x218 0x5b4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCOM__EPCD_PWRCOM			0x21c 0x5b8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCOM__GPIO3_27				0x21c 0x5b8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCOM__EIM_WEIM_D_27			0x21c 0x5b8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCOM__ELCDIF_DAT_11			0x21c 0x5b8 0x728 0x3 0x1
+#define MX50_PAD_EPDC_PWRCOM__AUDMUX_AUD4_TXC			0x21c 0x5b8 0x6d4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCOM__SDMA_DEBUG_CORE_RUN		0x21c 0x5b8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCOM__USBPHY2_LINESTATE_1		0x21c 0x5b8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EPCD_PWRSTAT			0x220 0x5bc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRSTAT__GPIO3_28				0x220 0x5bc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EIM_WEIM_D_28			0x220 0x5bc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_DAT_12			0x220 0x5bc 0x72c 0x3 0x1
+#define MX50_PAD_EPDC_PWRSTAT__AUDMUX_AUD4_TXFS			0x220 0x5bc 0x6d8 0x4 0x1
+#define MX50_PAD_EPDC_PWRSTAT__SDMA_DEBUG_MODE			0x220 0x5bc 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRSTAT__USBPHY2_VBUSVALID		0x220 0x5bc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EPCD_PWRCTRL0			0x224 0x5c0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__GPIO3_29			0x224 0x5c0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EIM_WEIM_D_29			0x224 0x5c0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_DAT_13			0x224 0x5c0 0x730 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__AUDMUX_AUD4_RXD			0x224 0x5c0 0x6c4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__SDMA_DEBUG_RTBUFFER_WRITE	0x224 0x5c0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__USBPHY2_AVALID			0x224 0x5c0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EPCD_PWRCTRL1			0x228 0x5c4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__GPIO3_30			0x228 0x5c4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EIM_WEIM_D_30			0x228 0x5c4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_DAT_14			0x228 0x5c4 0x734 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__AUDMUX_AUD4_RXC			0x228 0x5c4 0x6cc 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__SDMA_DEBUG_YIELD		0x228 0x5c4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__USBPHY1_ONBIST			0x228 0x5c4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EPCD_PWRCTRL2			0x22c 0x5c8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__GPIO3_31			0x22c 0x5c8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EIM_WEIM_D_31			0x22c 0x5c8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_DAT_15			0x22c 0x5c8 0x738 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__AUDMUX_AUD4_RXFS		0x22c 0x5c8 0x6d0 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT_EVENT_0		0x22c 0x5c8 0x7b8 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__USBPHY2_ONBIST			0x22c 0x5c8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EPCD_PWRCTRL3			0x230 0x5cc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__GPIO4_20			0x230 0x5cc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EIM_WEIM_EB_2			0x230 0x5cc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT_EVENT_1		0x230 0x5cc 0x7bc 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL3__USBPHY1_BISTOK			0x230 0x5cc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM0__EPCD_VCOM_0			0x234 0x5d0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM0__GPIO4_21				0x234 0x5d0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM0__EIM_WEIM_EB_3			0x234 0x5d0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_VCOM0__USBPHY2_BISTOK			0x234 0x5d0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM1__EPCD_VCOM_1			0x238 0x5d4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM1__GPIO4_22				0x238 0x5d4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM1__EIM_WEIM_CS_3			0x238 0x5d4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_BDR0__EPCD_BDR_0				0x23c 0x5d8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR0__GPIO4_23				0x23c 0x5d8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR0__ELCDIF_DAT_7			0x23c 0x5d8 0x718 0x3 0x1
+#define MX50_PAD_EPDC_BDR1__EPCD_BDR_1				0x240 0x5dc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR1__GPIO4_24				0x240 0x5dc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR1__ELCDIF_DAT_6			0x240 0x5dc 0x714 0x3 0x1
+#define MX50_PAD_EPDC_SDCE0__EPCD_SDCE_0			0x244 0x5e0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE0__GPIO4_25				0x244 0x5e0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE0__ELCDIF_DAT_5			0x244 0x5e0 0x710 0x3 0x1
+#define MX50_PAD_EPDC_SDCE1__EPCD_SDCE_1			0x248 0x5e4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE1__GPIO4_26				0x248 0x5e4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE1__ELCDIF_DAT_4			0x248 0x5e4 0x70c 0x3 0x0
+#define MX50_PAD_EPDC_SDCE2__EPCD_SDCE_2			0x24c 0x5e8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE2__GPIO4_27				0x24c 0x5e8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT_3			0x24c 0x5e8 0x708 0x3 0x1
+#define MX50_PAD_EPDC_SDCE3__EPCD_SDCE_3			0x250 0x5ec 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE3__GPIO4_28				0x250 0x5ec 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE3__ELCDIF_DAT_2			0x250 0x5ec 0x704 0x3 0x1
+#define MX50_PAD_EPDC_SDCE4__EPCD_SDCE_4			0x254 0x5f0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE4__GPIO4_29				0x254 0x5f0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE4__ELCDIF_DAT_1			0x254 0x5f0 0x700 0x3 0x1
+#define MX50_PAD_EPDC_SDCE5__EPCD_SDCE_5			0x258 0x5f4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE5__GPIO4_30				0x258 0x5f4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE5__ELCDIF_DAT_0			0x258 0x5f4 0x6fc 0x3 0x1
+#define MX50_PAD_EIM_DA0__EIM_WEIM_A_0				0x25c 0x5f8 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA0__GPIO1_0				0x25c 0x5f8 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA0__KPP_COL_4				0x25c 0x5f8 0x790 0x3 0x2
+#define MX50_PAD_EIM_DA0__TPIU_TRACE_0				0x25c 0x5f8 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA0__SRC_BT_CFG1_0				0x25c 0x5f8 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA1__EIM_WEIM_A_1				0x260 0x5fc 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA1__GPIO1_1				0x260 0x5fc 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA1__KPP_ROW_4				0x260 0x5fc 0x7a0 0x3 0x2
+#define MX50_PAD_EIM_DA1__TPIU_TRACE_1				0x260 0x5fc 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA1__SRC_BT_CFG1_1				0x260 0x5fc 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA2__EIM_WEIM_A_2				0x264 0x600 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA2__GPIO1_2				0x264 0x600 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA2__KPP_COL_5				0x264 0x600 0x794 0x3 0x2
+#define MX50_PAD_EIM_DA2__TPIU_TRACE_2				0x264 0x600 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA2__SRC_BT_CFG1_2				0x264 0x600 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA3__EIM_WEIM_A_3				0x268 0x604 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA3__GPIO1_3				0x268 0x604 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA3__KPP_ROW_5				0x268 0x604 0x7a4 0x3 0x2
+#define MX50_PAD_EIM_DA3__TPIU_TRACE_3				0x268 0x604 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA3__SRC_BT_CFG1_3				0x268 0x604 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA4__EIM_WEIM_A_4				0x26c 0x608 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA4__GPIO1_4				0x26c 0x608 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA4__KPP_COL_6				0x26c 0x608 0x798 0x3 0x2
+#define MX50_PAD_EIM_DA4__TPIU_TRACE_4				0x26c 0x608 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA4__SRC_BT_CFG1_4				0x26c 0x608 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA5__EIM_WEIM_A_5				0x270 0x60c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA5__GPIO1_5				0x270 0x60c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA5__KPP_ROW_6				0x270 0x60c 0x7a8 0x3 0x2
+#define MX50_PAD_EIM_DA5__TPIU_TRACE_5				0x270 0x60c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA5__SRC_BT_CFG1_5				0x270 0x60c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA6__EIM_WEIM_A_6				0x274 0x610 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA6__GPIO1_6				0x274 0x610 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA6__KPP_COL_7				0x274 0x610 0x79c 0x3 0x2
+#define MX50_PAD_EIM_DA6__TPIU_TRACE_6				0x274 0x610 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA6__SRC_BT_CFG1_6				0x274 0x610 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA7__EIM_WEIM_A_7				0x278 0x614 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA7__GPIO1_7				0x278 0x614 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA7__KPP_ROW_7				0x278 0x614 0x7ac 0x3 0x2
+#define MX50_PAD_EIM_DA7__TPIU_TRACE_7				0x278 0x614 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA7__SRC_BT_CFG1_7				0x278 0x614 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA8__EIM_WEIM_A_8				0x27c 0x618 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA8__GPIO1_8				0x27c 0x618 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA8__EIM_NANDF_CLE				0x27c 0x618 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA8__TPIU_TRACE_8				0x27c 0x618 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA8__SRC_BT_CFG2_0				0x27c 0x618 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA9__EIM_WEIM_A_9				0x280 0x61c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA9__GPIO1_9				0x280 0x61c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA9__EIM_NANDF_ALE				0x280 0x61c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA9__TPIU_TRACE_9				0x280 0x61c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA9__SRC_BT_CFG2_1				0x280 0x61c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA10__EIM_WEIM_A_10			0x284 0x620 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA10__GPIO1_10				0x284 0x620 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA10__EIM_NANDF_CEN_0			0x284 0x620 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA10__TPIU_TRACE_10			0x284 0x620 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA10__SRC_BT_CFG2_2			0x284 0x620 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA11__EIM_WEIM_A_11			0x288 0x624 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA11__GPIO1_11				0x288 0x624 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA11__EIM_NANDF_CEN_1			0x288 0x624 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA11__TPIU_TRACE_11			0x288 0x624 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA11__SRC_BT_CFG2_3			0x288 0x624 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA12__EIM_WEIM_A_12			0x28c 0x628 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA12__GPIO1_12				0x28c 0x628 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA12__EIM_NANDF_CEN_2			0x28c 0x628 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA12__EPDC_SDCE_6				0x28c 0x628 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA12__TPIU_TRACE_12			0x28c 0x628 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA12__SRC_BT_CFG2_4			0x28c 0x628 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA13__EIM_WEIM_A_13			0x290 0x62c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA13__GPIO1_13				0x290 0x62c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA13__EIM_NANDF_CEN_3			0x290 0x62c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA13__EPDC_SDCE_7				0x290 0x62c 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA13__TPIU_TRACE_13			0x290 0x62c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA13__SRC_BT_CFG2_5			0x290 0x62c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA14__EIM_WEIM_A_14			0x294 0x630 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA14__GPIO1_14				0x294 0x630 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA14__EIM_NANDF_READY0			0x294 0x630 0x7b4 0x2 0x2
+#define MX50_PAD_EIM_DA14__EPDC_SDCE_8				0x294 0x630 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA14__TPIU_TRACE_14			0x294 0x630 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA14__SRC_BT_CFG2_6			0x294 0x630 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA15__EIM_WEIM_A_15			0x298 0x634 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA15__GPIO1_15				0x298 0x634 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA15__EIM_NANDF_DQS			0x298 0x634 0x7b0 0x2 0x2
+#define MX50_PAD_EIM_DA15__EPDC_SDCE_9				0x298 0x634 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA15__TPIU_TRACE_15			0x298 0x634 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA15__SRC_BT_CFG2_7			0x298 0x634 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_CS_2				0x29c 0x638 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS2__GPIO1_16				0x29c 0x638 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_A_27				0x29c 0x638 0x000 0x2 0x0
+#define MX50_PAD_EIM_CS2__TPIU_TRCLK				0x29c 0x638 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS2__SRC_BT_CFG3_0				0x29c 0x638 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS1__EIM_WEIM_CS_1				0x2a0 0x63c 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS1__GPIO1_17				0x2a0 0x63c 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS1__TPIU_TRCTL				0x2a0 0x63c 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS1__SRC_BT_CFG3_1				0x2a0 0x63c 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS0__EIM_WEIM_CS_0				0x2a4 0x640 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS0__GPIO1_18				0x2a4 0x640 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS0__SRC_BT_CFG3_2				0x2a4 0x640 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB0__EIM_WEIM_EB_0				0x2a8 0x644 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB0__GPIO1_19				0x2a8 0x644 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB0__SRC_BT_CFG3_3				0x2a8 0x644 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB1__EIM_WEIM_EB_1				0x2ac 0x648 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB1__GPIO1_20				0x2ac 0x648 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB1__SRC_BT_CFG3_4				0x2ac 0x648 0x000 0x7 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_WAIT			0x2b0 0x64c 0x000 0x0 0x0
+#define MX50_PAD_EIM_WAIT__GPIO1_21				0x2b0 0x64c 0x000 0x1 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_DTACK_B			0x2b0 0x64c 0x000 0x2 0x0
+#define MX50_PAD_EIM_WAIT__SRC_BT_CFG3_5			0x2b0 0x64c 0x000 0x7 0x0
+#define MX50_PAD_EIM_BCLK__EIM_WEIM_BCLK			0x2b4 0x650 0x000 0x0 0x0
+#define MX50_PAD_EIM_BCLK__GPIO1_22				0x2b4 0x650 0x000 0x1 0x0
+#define MX50_PAD_EIM_BCLK__SRC_BT_CFG3_6			0x2b4 0x650 0x000 0x7 0x0
+#define MX50_PAD_EIM_RDY__EIM_WEIM_RDY				0x2b8 0x654 0x000 0x0 0x0
+#define MX50_PAD_EIM_RDY__GPIO1_23				0x2b8 0x654 0x000 0x1 0x0
+#define MX50_PAD_EIM_RDY__SRC_BT_CFG3_7				0x2b8 0x654 0x000 0x7 0x0
+#define MX50_PAD_EIM_OE__EIM_WEIM_OE				0x2bc 0x658 0x000 0x0 0x0
+#define MX50_PAD_EIM_OE__GPIO1_24				0x2bc 0x658 0x000 0x1 0x0
+#define MX50_PAD_EIM_OE__INT_BOOT				0x2bc 0x658 0x000 0x7 0x0
+#define MX50_PAD_EIM_RW__EIM_WEIM_RW				0x2c0 0x65c 0x000 0x0 0x0
+#define MX50_PAD_EIM_RW__GPIO1_25				0x2c0 0x65c 0x000 0x1 0x0
+#define MX50_PAD_EIM_RW__SYSTEM_RST				0x2c0 0x65c 0x000 0x7 0x0
+#define MX50_PAD_EIM_LBA__EIM_WEIM_LBA				0x2c4 0x660 0x000 0x0 0x0
+#define MX50_PAD_EIM_LBA__GPIO1_26				0x2c4 0x660 0x000 0x1 0x0
+#define MX50_PAD_EIM_LBA__TESTER_ACK				0x2c4 0x660 0x000 0x7 0x0
+#define MX50_PAD_EIM_CRE__EIM_WEIM_CRE				0x2c8 0x664 0x000 0x0 0x0
+#define MX50_PAD_EIM_CRE__GPIO1_27				0x2c8 0x664 0x000 0x1 0x0
+
+#endif /* __DTS_IMX50_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
new file mode 100644
index 000000000000..6a201cf54366
--- /dev/null
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -0,0 +1,483 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx50-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
+	};
+
+	tzic: tz-interrupt-controller@0fffc000 {
+		compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x0fffc000 0x4000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&tzic>;
+		ranges;
+
+		aips@50000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x10000000>;
+			ranges;
+
+			spba@50000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x50000000 0x40000>;
+				ranges;
+
+				esdhc1: esdhc@50004000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50004000 0x4000>;
+					interrupts = <1>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc2: esdhc@50008000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50008000 0x4000>;
+					interrupts = <2>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				uart3: serial@5000c000 {
+					compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+					reg = <0x5000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+					         <&clks IMX5_CLK_UART3_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi1: ecspi@50010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+					reg = <0x50010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@50014000 {
+					compatible = "fsl,imx50-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+					reg = <0x50014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
+					status = "disabled";
+				};
+
+				esdhc3: esdhc@50020000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50020000 0x4000>;
+					interrupts = <3>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc4: esdhc@50024000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50024000 0x4000>;
+					interrupts = <4>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+			};
+
+			usbotg: usb@53f80000 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+				status = "disabled";
+			};
+
+			usbh1: usb@53f80200 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80200 0x0200>;
+				interrupts = <14>;
+				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+				status = "disabled";
+			};
+
+			usbh2: usb@53f80400 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80400 0x0200>;
+				interrupts = <16>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				status = "disabled";
+			};
+
+			usbh3: usb@53f80600 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80600 0x0200>;
+				interrupts = <17>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@53f84000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <50 51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53f88000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f88000 0x4000>;
+				interrupts = <52 53>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@53f8c000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f8c000 0x4000>;
+				interrupts = <54 55>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@53f90000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <56 57>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			wdog1: wdog@53f98000 {
+				compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+			};
+
+			gpt: timer@53fa0000 {
+				compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
+				reg = <0x53fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+				         <&clks IMX5_CLK_GPT_HF_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			iomuxc: iomuxc@53fa8000 {
+				compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@53fa8000 {
+				compatible = "fsl,imx50-iomuxc-gpr", "syscon";
+				reg = <0x53fa8000 0xc>;
+			};
+
+			pwm1: pwm@53fb4000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb4000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+				         <&clks IMX5_CLK_PWM1_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@53fb8000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb8000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+				         <&clks IMX5_CLK_PWM2_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@53fbc000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+				         <&clks IMX5_CLK_UART1_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@53fc0000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+				         <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			src: src@53fd0000 {
+				compatible = "fsl,imx50-src", "fsl,imx51-src";
+				reg = <0x53fd0000 0x4000>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@53fd4000{
+				compatible = "fsl,imx50-ccm";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+
+			gpio5: gpio@53fdc000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53fdc000 0x4000>;
+				interrupts = <103 104>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@53fe0000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <105 106>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			i2c3: i2c@53fec000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x53fec000 0x4000>;
+				interrupts = <64>;
+				clocks = <&clks IMX5_CLK_I2C3_GATE>;
+				status = "disabled";
+			};
+
+			uart4: serial@53ff0000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+				         <&clks IMX5_CLK_UART4_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		aips@60000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x60000000 0x10000000>;
+			ranges;
+
+			uart5: serial@63f90000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x63f90000 0x4000>;
+				interrupts = <86>;
+				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+				         <&clks IMX5_CLK_UART5_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			owire: owire@63fa4000 {
+				compatible = "fsl,imx50-owire", "fsl,imx21-owire";
+				reg = <0x63fa4000 0x4000>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+				status = "disabled";
+			};
+
+			ecspi2: ecspi@63fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+				reg = <0x63fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: sdma@63fb0000 {
+				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
+				reg = <0x63fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+				         <&clks IMX5_CLK_SDMA_GATE>;
+				clock-names = "ipg", "ahb";
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
+			};
+
+			cspi: cspi@63fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
+				reg = <0x63fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@63fc4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc4000 0x4000>;
+				interrupts = <63>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@63fc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc8000 0x4000>;
+				interrupts = <62>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@63fcc000 {
+				compatible = "fsl,imx50-ssi", "fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+				reg = <0x63fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
+				fsl,fifo-depth = <15>;
+				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
+				status = "disabled";
+			};
+
+			audmux: audmux@63fd0000 {
+				compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
+				reg = <0x63fd0000 0x4000>;
+				status = "disabled";
+			};
+
+			fec: ethernet@63fec000 {
+				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+				reg = <0x63fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
index b3606993f2e8..e88b2a6be079 100644
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ b/arch/arm/boot/dts/imx51-apf51.dts
@@ -34,13 +34,47 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec_2>;
+	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "mii";
-	phy-reset-gpios = <&gpio3 0 0>;
+	phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 	phy-reset-duration = <1>;
 	status = "okay";
 };
 
+&iomuxc {
+	imx51-apf51 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+			>;
+		};
+	};
+};
+
 &nfc {
 	nand-bus-width = <8>;
 	nand-ecc-mode = "hw";
@@ -50,6 +84,6 @@
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_2>;
+	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 5a7f552786a1..c5a9a24c280a 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -18,10 +18,9 @@
 
 	display@di1 {
 		compatible = "fsl,imx-parallel-display";
-		crtcs = <&ipu 0>;
 		interface-pix-fmt = "bgr666";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
 
 		display-timings {
 			lw700 {
@@ -41,6 +40,12 @@
 				pixelclk-active = <0>;
 			};
 		};
+
+		port {
+			display_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
 	};
 
 	gpio-keys {
@@ -48,7 +53,7 @@
 
 		user-key {
 			label = "user";
-			gpios = <&gpio1 3 0>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 			linux,code = <256>; /* BTN_0 */
 		};
 	};
@@ -58,7 +63,7 @@
 
 		user {
 			label = "Heartbeat";
-			gpios = <&gpio1 2 0>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -66,31 +71,33 @@
 
 &ecspi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
 	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &ecspi2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2_1>;
+	pinctrl-0 = <&pinctrl_ecspi2>;
 	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio3 28 1>, <&gpio3 27 1>;
+	cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
+		   <&gpio3 27 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &esdhc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1_1>;
-	cd-gpios = <&gpio2 29 0>;
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
 	bus-width = <4>;
 	status = "okay";
 };
 
 &esdhc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2_1>;
+	pinctrl-0 = <&pinctrl_esdhc2>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
@@ -98,7 +105,7 @@
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_2>;
+	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 };
 
@@ -106,7 +113,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	hog {
+	imx51-apf51dev {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX51_PAD_EIM_EB2__GPIO2_22   0x0C5
@@ -120,5 +127,85 @@
 				MX51_PAD_GPIO1_3__GPIO1_3    0x0C5
 			>;
 		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX51_PAD_NANDF_RB3__ECSPI2_MISO		0x185
+				MX51_PAD_NANDF_D15__ECSPI2_MOSI		0x185
+				MX51_PAD_NANDF_RB2__ECSPI2_SCLK		0x185
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX51_PAD_EIM_D27__I2C2_SCL		0x400001ed
+				MX51_PAD_EIM_D24__I2C2_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_ipu_disp1: ipudisp1grp {
+			fsl,pins = <
+				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			>;
+		};
 	};
 };
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index be1407cf5abd..6bc3243a80d3 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -17,16 +17,33 @@
 	model = "Freescale i.MX51 Babbage Board";
 	compatible = "fsl,imx51-babbage", "fsl,imx51";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	memory {
 		reg = <0x90000000 0x20000000>;
 	};
 
-	display@di0 {
+	clocks {
+		ckih1 {
+			clock-frequency = <22579200>;
+		};
+
+		clk_26M: codec_clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+			gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	display0: display@di0 {
 		compatible = "fsl,imx-parallel-display";
-		crtcs = <&ipu 0>;
 		interface-pix-fmt = "rgb24";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
 		display-timings {
 			native-mode = <&timing0>;
 			timing0: dvi {
@@ -41,14 +58,19 @@
 				vsync-len = <10>;
 			};
 		};
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
 	};
 
-	display@di1 {
+	display1: display@di1 {
 		compatible = "fsl,imx-parallel-display";
-		crtcs = <&ipu 1>;
 		interface-pix-fmt = "rgb565";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp2_1>;
+		pinctrl-0 = <&pinctrl_ipu_disp2>;
 		status = "disabled";
 		display-timings {
 			native-mode = <&timing1>;
@@ -68,19 +90,68 @@
 				pixelclk-active = <0>;
 			};
 		};
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
 
 		power {
 			label = "Power Button";
-			gpios = <&gpio2 21 0>;
-			linux,code = <116>; /* KEY_POWER */
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
 			gpio-key,wakeup;
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-diagnostic {
+			label = "diagnostic";
+			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usbh1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1reg>;
+			reg = <0>;
+			regulator-name = "usbh1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usbotg_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbotgreg>;
+			reg = <1>;
+			regulator-name = "usbotg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
 	sound {
 		compatible = "fsl,imx51-babbage-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
@@ -95,60 +166,43 @@
 		mux-ext-port = <3>;
 	};
 
-	clocks {
-		ckih1 {
-			clock-frequency = <22579200>;
-		};
+	usbphy {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
 
-		clk_26M: codec_clock {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-			gpios = <&gpio4 26 1>;
+		usbh1phy: usbh1phy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			clocks = <&clks IMX5_CLK_DUMMY>;
+			clock-names = "main_clk";
 		};
 	};
 };
 
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1_1>;
-	fsl,cd-controller;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2_1>;
-	cd-gpios = <&gpio1 6 0>;
-	wp-gpios = <&gpio1 5 0>;
-	status = "okay";
-};
-
-&uart3 {
+&audmux {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_1 &pinctrl_uart3_rtscts_1>;
-	fsl,uart-has-rtscts;
+	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 };
 
 &ecspi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
 	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	pmic: mc13892@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
 		spi-max-frequency = <6000000>;
 		spi-cs-high;
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <8 0x4>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 
 		regulators {
 			sw1_reg: sw1 {
@@ -258,51 +312,46 @@
 	};
 };
 
-&ssi2 {
-	fsl,mode = "i2s-slave";
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	fsl,cd-controller;
+	fsl,wp-controller;
 	status = "okay";
 };
 
-&iomuxc {
+&esdhc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_0__SD1_CD     0x20d5
-				MX51_PAD_GPIO1_1__SD1_WP     0x20d5
-				MX51_PAD_GPIO1_5__GPIO1_5    0x100
-				MX51_PAD_GPIO1_6__GPIO1_6    0x100
-				MX51_PAD_EIM_A27__GPIO2_21   0x5
-				MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
-				MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
-				MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
-			>;
-		};
-	};
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
 };
 
-&uart1 {
+&fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1 &pinctrl_uart1_rtscts_1>;
-	fsl,uart-has-rtscts;
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
 	status = "okay";
 };
 
-&uart2 {
+&i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
+	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 };
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_1>;
+	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
 	sgtl5000: codec@0a {
 		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clkcodec>;
 		reg = <0x0a>;
 		clocks = <&clk_26M>;
 		VDDA-supply = <&vdig_reg>;
@@ -310,37 +359,309 @@
 	};
 };
 
-&audmux {
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&kpp {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 3, KEY_HOME)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_ENTER)
+		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
+		MATRIX_KEY(2, 0, KEY_F6)
+		MATRIX_KEY(2, 1, KEY_F8)
+		MATRIX_KEY(2, 2, KEY_F9)
+		MATRIX_KEY(2, 3, KEY_F10)
+		MATRIX_KEY(3, 0, KEY_F1)
+		MATRIX_KEY(3, 1, KEY_F2)
+		MATRIX_KEY(3, 2, KEY_F3)
+		MATRIX_KEY(3, 3, KEY_POWER)
+	>;
 	status = "okay";
 };
 
-&fec {
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec_1>;
-	phy-mode = "mii";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
 	status = "okay";
 };
 
-&kpp {
+&uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp_1>;
-	linux,keymap = <0x00000067	/* KEY_UP */
-			0x0001006c	/* KEY_DOWN */
-			0x00020072	/* KEY_VOLUMEDOWN */
-			0x00030066	/* KEY_HOME */
-			0x0100006a	/* KEY_RIGHT */
-			0x01010069	/* KEY_LEFT */
-			0x0102001c	/* KEY_ENTER */
-			0x01030073	/* KEY_VOLUMEUP */
-			0x02000040	/* KEY_F6 */
-			0x02010042	/* KEY_F8 */
-			0x02020043	/* KEY_F9 */
-			0x02030044	/* KEY_F10 */
-			0x0300003b	/* KEY_F1 */
-			0x0301003c	/* KEY_F2 */
-			0x0302003d	/* KEY_F3 */
-			0x03030074>;	/* KEY_POWER */
+	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	fsl,usbphy = <&usbh1phy>;
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx51-babbage {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
+				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
+				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
+				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
+			>;
+		};
+
+		pinctrl_clkcodec: clkcodecgrp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_RDY__GPIO4_26		0x80000000
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+				MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+				MX51_PAD_GPIO1_0__SD1_CD		0x20d5
+				MX51_PAD_GPIO1_1__SD1_WP		0x20d5
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+				MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
+				MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
+				MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
+				MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
+				MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
+				MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
+				MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
+				MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
+				MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
+				MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
+				MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
+				MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
+				MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
+				MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
+				MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
+				MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
+				MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
+				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
+				MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
+				MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
+			>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_A27__GPIO2_21		0x5
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_D22__GPIO2_6		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
+				MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+				MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_ipu_disp1: ipudisp1grp {
+			fsl,pins = <
+				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			>;
+		};
+
+		pinctrl_ipu_disp2: ipudisp2grp {
+			fsl,pins = <
+				MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
+				MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
+				MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
+				MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
+				MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
+				MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
+				MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
+				MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
+				MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
+				MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
+				MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
+				MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
+				MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
+				MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
+				MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
+				MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
+				MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
+				MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
+				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+				MX51_PAD_DI_GP4__DI2_PIN15		0x5
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
+				MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
+				MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
+				MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
+				MX51_PAD_KEY_COL0__KEY_COL0		0xe8
+				MX51_PAD_KEY_COL1__KEY_COL1		0xe8
+				MX51_PAD_KEY_COL2__KEY_COL2		0xe8
+				MX51_PAD_KEY_COL3__KEY_COL3		0xe8
+			>;
+		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+				MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
+				MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+				MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+				MX51_PAD_EIM_D27__UART3_RTS		0x1c5
+				MX51_PAD_EIM_D24__UART3_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
+				MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
+				MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
+			>;
+		};
+
+		pinctrl_usbh1reg: usbh1reggrp {
+			fsl,pins = <
+				MX51_PAD_EIM_D21__GPIO2_5		0x85
+			>;
+		};
+
+		pinctrl_usbotgreg: usbotgreggrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_7__GPIO1_7		0x85
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
new file mode 100644
index 000000000000..1db517d3d497
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx51-digi-connectcore-som.dtsi"
+
+/ {
+	model = "Digi ConnectCore CC(W)-MX51 JSK";
+	compatible = "digi,connectcore-ccxmx51-jsk",
+		     "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+	chosen {
+		linux,stdout-path = &uart1;
+	};
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&iomuxc {
+	imx51-digi-connectcore-jsk {
+		pinctrl_owire: owiregrp {
+			fsl,pins = <
+				MX51_PAD_OWIRE_LINE__OWIRE_LINE		0x40000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x1e5
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x1e5
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x1e5
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x1e5
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x1e5
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x1e5
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x1e5
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x1e5
+				MX51_PAD_USBH1_CLK__USBH1_CLK		0x1e5
+				MX51_PAD_USBH1_DIR__USBH1_DIR		0x1e5
+				MX51_PAD_USBH1_NXT__USBH1_NXT		0x1e5
+				MX51_PAD_USBH1_STP__USBH1_STP		0x1e5
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
new file mode 100644
index 000000000000..321662f53e33
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
@@ -0,0 +1,377 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Digi ConnectCore CC(W)-MX51";
+	compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+	memory {
+		reg = <0x90000000 0x08000000>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13892@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mc13892>;
+		compatible = "fsl,mc13892";
+		spi-max-frequency = <16000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-rtc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1225000>;
+				regulator-max-microvolt = <1225000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst { };
+
+			viohi_reg: viohi {
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <3150000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <2600000>;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2750000>;
+				regulator-max-microvolt = <2750000>;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <3150000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			gpo1_reg: gpo1 { };
+
+			gpo2_reg: gpo2 { };
+
+			gpo3_reg: gpo3 { };
+
+			gpo4_reg: gpo4 { };
+
+			pwgt2spi_reg: pwgt2spi {
+				regulator-always-on;
+			};
+
+			vcoincell_reg: vcoincell {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cap-sdio-irq;
+	enable-sdio-wakeup;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&gpo4_reg>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-supply = <&gpo3_reg>;
+	/* Pins shared with LCD2, keep status disabled */
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	mma7455l@1d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mma7455l>;
+		compatible = "fsl,mma7455l";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi_wide";
+	disable-over-current;
+	/* Device role is not known, keep status disabled */
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	lan9221: lan9221@5,0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lan9221>;
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <5 0x00000000 0x1000>;
+		fsl,weim-cs-timing = <
+			0x00420081 0x00000000
+			0x32260000 0x00000000
+			0x72080f00 0x00000000
+		>;
+		clocks = <&clks IMX5_CLK_DUMMY>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&gpo2_reg>;
+		vddvario-supply = <&gpo2_reg>;
+	};
+};
+
+&iomuxc {
+	imx51-digi-connectcore-som {
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_2__I2C2_SCL		0x400001ed
+				MX51_PAD_GPIO1_3__I2C2_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX51_PAD_NANDF_D0__NANDF_D0		0x80000000
+				MX51_PAD_NANDF_D1__NANDF_D1		0x80000000
+				MX51_PAD_NANDF_D2__NANDF_D2		0x80000000
+				MX51_PAD_NANDF_D3__NANDF_D3		0x80000000
+				MX51_PAD_NANDF_D4__NANDF_D4		0x80000000
+				MX51_PAD_NANDF_D5__NANDF_D5		0x80000000
+				MX51_PAD_NANDF_D6__NANDF_D6		0x80000000
+				MX51_PAD_NANDF_D7__NANDF_D7		0x80000000
+				MX51_PAD_NANDF_ALE__NANDF_ALE		0x80000000
+				MX51_PAD_NANDF_CLE__NANDF_CLE		0x80000000
+				MX51_PAD_NANDF_RE_B__NANDF_RE_B		0x80000000
+				MX51_PAD_NANDF_WE_B__NANDF_WE_B		0x80000000
+				MX51_PAD_NANDF_WP_B__NANDF_WP_B		0x80000000
+				MX51_PAD_NANDF_CS0__NANDF_CS0		0x80000000
+				MX51_PAD_NANDF_RB0__NANDF_RB0		0x80000000
+			>;
+		};
+
+		pinctrl_lan9221: lan9221grp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_9__GPIO1_9		0xe5 /* IRQ */
+			>;
+		};
+
+		pinctrl_mc13892: mc13892grp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_5__GPIO1_5		0xe5 /* IRQ */
+			>;
+		};
+
+		pinctrl_mma7455l: mma7455lgrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_7__GPIO1_7		0xe5 /* IRQ1 */
+				MX51_PAD_GPIO1_6__GPIO1_6		0xe5 /* IRQ2 */
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_DA0__EIM_DA0		0x80000000
+				MX51_PAD_EIM_DA1__EIM_DA1		0x80000000
+				MX51_PAD_EIM_DA2__EIM_DA2		0x80000000
+				MX51_PAD_EIM_DA3__EIM_DA3		0x80000000
+				MX51_PAD_EIM_DA4__EIM_DA4		0x80000000
+				MX51_PAD_EIM_DA5__EIM_DA5		0x80000000
+				MX51_PAD_EIM_DA6__EIM_DA6		0x80000000
+				MX51_PAD_EIM_DA7__EIM_DA7		0x80000000
+				MX51_PAD_EIM_DA8__EIM_DA8		0x80000000
+				MX51_PAD_EIM_DA9__EIM_DA9		0x80000000
+				MX51_PAD_EIM_DA10__EIM_DA10		0x80000000
+				MX51_PAD_EIM_DA11__EIM_DA11		0x80000000
+				MX51_PAD_EIM_DA12__EIM_DA12		0x80000000
+				MX51_PAD_EIM_DA13__EIM_DA13		0x80000000
+				MX51_PAD_EIM_DA14__EIM_DA14		0x80000000
+				MX51_PAD_EIM_DA15__EIM_DA15		0x80000000
+				MX51_PAD_EIM_A16__EIM_A16		0x80000000
+				MX51_PAD_EIM_A17__EIM_A17		0x80000000
+				MX51_PAD_EIM_A18__EIM_A18		0x80000000
+				MX51_PAD_EIM_A19__EIM_A19		0x80000000
+				MX51_PAD_EIM_A20__EIM_A20		0x80000000
+				MX51_PAD_EIM_A21__EIM_A21		0x80000000
+				MX51_PAD_EIM_A22__EIM_A22		0x80000000
+				MX51_PAD_EIM_A23__EIM_A23		0x80000000
+				MX51_PAD_EIM_A24__EIM_A24		0x80000000
+				MX51_PAD_EIM_A25__EIM_A25		0x80000000
+				MX51_PAD_EIM_A26__EIM_A26		0x80000000
+				MX51_PAD_EIM_A27__EIM_A27		0x80000000
+				MX51_PAD_EIM_D16__EIM_D16		0x80000000
+				MX51_PAD_EIM_D17__EIM_D17		0x80000000
+				MX51_PAD_EIM_D18__EIM_D18		0x80000000
+				MX51_PAD_EIM_D19__EIM_D19		0x80000000
+				MX51_PAD_EIM_D20__EIM_D20		0x80000000
+				MX51_PAD_EIM_D21__EIM_D21		0x80000000
+				MX51_PAD_EIM_D22__EIM_D22		0x80000000
+				MX51_PAD_EIM_D23__EIM_D23		0x80000000
+				MX51_PAD_EIM_D24__EIM_D24		0x80000000
+				MX51_PAD_EIM_D25__EIM_D25		0x80000000
+				MX51_PAD_EIM_D26__EIM_D26		0x80000000
+				MX51_PAD_EIM_D27__EIM_D27		0x80000000
+				MX51_PAD_EIM_D28__EIM_D28		0x80000000
+				MX51_PAD_EIM_D29__EIM_D29		0x80000000
+				MX51_PAD_EIM_D30__EIM_D30		0x80000000
+				MX51_PAD_EIM_D31__EIM_D31		0x80000000
+				MX51_PAD_EIM_OE__EIM_OE			0x80000000
+				MX51_PAD_EIM_DTACK__EIM_DTACK		0x80000000
+				MX51_PAD_EIM_LBA__EIM_LBA		0x80000000
+				MX51_PAD_EIM_CS5__EIM_CS5		0x80000000 /* CS5 */
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
new file mode 100644
index 000000000000..63164266af83
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx51.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,cpuimx51", "fsl,imx51";
+
+	memory {
+		reg = <0x90000000 0x10000000>; /* 256M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsc2007: tsc2007@49 {
+		compatible = "ti,tsc2007";
+		gpios = <&gpio4 0 1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <0x0 0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007_1>;
+		reg = <0x49>;
+		ti,x-plate-ohms = <180>;
+	};
+};
+
+&iomuxc {
+	imx51-eukrea {
+		pinctrl_tsc2007_1: tsc2007grp-1 {
+			fsl,pins = <
+				MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
+				MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__I2C1_SCL		0x400001ed
+				MX51_PAD_SD2_CLK__I2C1_SDA		0x400001ed
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
new file mode 100644
index 000000000000..75e66c9c6144
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -0,0 +1,295 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/dts-v1/;
+#include "imx51-eukrea-cpuimx51.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
+
+	clocks {
+		clk24M: can_clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys_1>;
+
+		button-1 {
+			label = "BP1";
+			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+			gpio-key,wakeup;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_can: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "CAN_RST";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <20000>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx51-eukrea-tlv320aic23";
+		ssi-controller = <&ssi2>;
+		fsl,mux-int-port = <2>;
+		fsl,mux-ext-port = <3>;
+	};
+
+	usbphy {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		usbh1phy: usbh1phy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+			clock-names = "main_clk";
+			clock-frequency = <19200000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
+	fsl,cd-controller;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can0: can@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can>;
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		clocks = <&clk24M>;
+		spi-max-frequency = <10000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&reg_can>;
+	};
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx51-eukrea {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
+				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
+				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
+				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
+			>;
+		};
+
+
+		pinctrl_can: cangrp {
+			fsl,pins = <
+				MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x80000000	/* nReset */
+				MX51_PAD_GPIO1_1__GPIO1_1		0x80000000	/* IRQ */
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+				MX51_PAD_CSPI1_SS0__GPIO4_24		0x80000000 	/* CS0 */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3_rtscts: uart3rtsctsgrp {
+			fsl,pins = <
+				MX51_PAD_KEY_COL4__UART3_RTS		0x1c5
+				MX51_PAD_KEY_COL5__UART3_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_backlight_1: backlightgrp-1 {
+			fsl,pins = <
+				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
+			>;
+		};
+
+		pinctrl_esdhc1_cd: esdhc1_cd {
+			fsl,pins = <
+				MX51_PAD_GPIO1_0__SD1_CD 0x20d5
+			>;
+		};
+
+		pinctrl_gpiokeys_1: gpiokeysgrp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
+			>;
+		};
+
+		pinctrl_gpioled: gpioledgrp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
+			>;
+		};
+
+		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+			fsl,pins = <
+				MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX51_PAD_USBH1_CLK__USBH1_CLK     0x1e5
+				MX51_PAD_USBH1_DIR__USBH1_DIR     0x1e5
+				MX51_PAD_USBH1_NXT__USBH1_NXT     0x1e5
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
+				MX51_PAD_USBH1_STP__USBH1_STP     0x1e5
+			>;
+		};
+
+		pinctrl_usbh1_vbus: usbh1-vbusgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
+			>;
+		};
+	};
+};
+
+&ssi2 {
+	codec-handle = <&tlv320aic23>;
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	fsl,usbphy = <&usbh1phy>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	phy_type = "utmi_wide";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1_vbus>;
+	reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 4bcdd3ad15e5..bebbf3ba0d5e 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -12,15 +12,24 @@
 
 #include "skeleton.dtsi"
 #include "imx51-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		mmc3 = &esdhc4;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -42,21 +51,25 @@
 
 		ckil {
 			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
 			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		ckih2 {
 			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
 			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
@@ -64,21 +77,40 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cpu@0 {
+		cpu: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a8";
 			reg = <0>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			clocks = <&clks 24>;
+			clock-latency = <62500>;
+			clocks = <&clks IMX5_CLK_CPU_PODF>;
 			clock-names = "cpu";
 			operating-points = <
-				/* kHz  uV (No regulator support) */
-				160000  0
-				800000  0
+				166000	1000000
+				600000	1050000
+				800000	1100000
 			>;
+			voltage-tolerance = <5>;
 		};
 	};
 
+	usbphy {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		usbphy0: usbphy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+			clock-names = "main_clk";
+		};
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu_di0>, <&ipu_di1>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -92,13 +124,30 @@
 		};
 
 		ipu: ipu@40000000 {
-			#crtc-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,imx51-ipu";
 			reg = <0x40000000 0x20000000>;
 			interrupts = <11 10>;
-			clocks = <&clks 59>, <&clks 110>, <&clks 61>;
+			clocks = <&clks IMX5_CLK_IPU_GATE>,
+			         <&clks IMX5_CLK_IPU_DI0_GATE>,
+			         <&clks IMX5_CLK_IPU_DI1_GATE>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
+
+			ipu_di0: port@2 {
+				reg = <2>;
+
+				ipu_di0_disp0: endpoint {
+				};
+			};
+
+			ipu_di1: port@3 {
+				reg = <3>;
+
+				ipu_di1_disp1: endpoint {
+				};
+			};
 		};
 
 		aips@70000000 { /* AIPS1 */
@@ -119,7 +168,9 @@
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70004000 0x4000>;
 					interrupts = <1>;
-					clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					status = "disabled";
 				};
@@ -128,7 +179,9 @@
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70008000 0x4000>;
 					interrupts = <2>;
-					clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -138,7 +191,8 @@
 					compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 					reg = <0x7000c000 0x4000>;
 					interrupts = <33>;
-					clocks = <&clks 32>, <&clks 33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+					         <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -149,7 +203,8 @@
 					compatible = "fsl,imx51-ecspi";
 					reg = <0x70010000 0x4000>;
 					interrupts = <36>;
-					clocks = <&clks 51>, <&clks 52>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -158,7 +213,7 @@
 					compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 					reg = <0x70014000 0x4000>;
 					interrupts = <30>;
-					clocks = <&clks 49>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
 					dmas = <&sdma 24 1 0>,
 					       <&sdma 25 1 0>;
 					dma-names = "rx", "tx";
@@ -171,7 +226,9 @@
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70020000 0x4000>;
 					interrupts = <3>;
-					clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -181,25 +238,20 @@
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70024000 0x4000>;
 					interrupts = <4>;
-					clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
 				};
 			};
 
-			usbphy0: usbphy@0 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks 75>;
-				clock-names = "main_clk";
-				status = "okay";
-			};
-
 			usbotg: usb@73f80000 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80000 0x0200>;
 				interrupts = <18>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,usbphy = <&usbphy0>;
 				status = "disabled";
@@ -209,7 +261,7 @@
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80200 0x0200>;
 				interrupts = <14>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 1>;
 				status = "disabled";
 			};
@@ -218,7 +270,7 @@
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80400 0x0200>;
 				interrupts = <16>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
 			};
@@ -227,7 +279,7 @@
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80600 0x0200>;
 				interrupts = <17>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 3>;
 				status = "disabled";
 			};
@@ -236,7 +288,7 @@
 				#index-cells = <1>;
 				compatible = "fsl,imx51-usbmisc";
 				reg = <0x73f80800 0x200>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 			};
 
 			gpio1: gpio@73f84000 {
@@ -283,7 +335,7 @@
 				compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
 				reg = <0x73f94000 0x4000>;
 				interrupts = <60>;
-				clocks = <&clks 0>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
 				status = "disabled";
 			};
 
@@ -291,14 +343,14 @@
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f98000 0x4000>;
 				interrupts = <58>;
-				clocks = <&clks 0>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
 			};
 
 			wdog2: wdog@73f9c000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f9c000 0x4000>;
 				interrupts = <59>;
-				clocks = <&clks 0>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
 				status = "disabled";
 			};
 
@@ -306,7 +358,8 @@
 				compatible = "fsl,imx51-gpt", "fsl,imx31-gpt";
 				reg = <0x73fa0000 0x4000>;
 				interrupts = <39>;
-				clocks = <&clks 36>, <&clks 41>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+				         <&clks IMX5_CLK_GPT_HF_GATE>;
 				clock-names = "ipg", "per";
 			};
 
@@ -319,7 +372,8 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb4000 0x4000>;
-				clocks = <&clks 37>, <&clks 38>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+				         <&clks IMX5_CLK_PWM1_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <61>;
 			};
@@ -328,7 +382,8 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb8000 0x4000>;
-				clocks = <&clks 39>, <&clks 40>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+				         <&clks IMX5_CLK_PWM2_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <94>;
 			};
@@ -337,7 +392,8 @@
 				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 				reg = <0x73fbc000 0x4000>;
 				interrupts = <31>;
-				clocks = <&clks 28>, <&clks 29>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+				         <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -346,7 +402,8 @@
 				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 				reg = <0x73fc0000 0x4000>;
 				interrupts = <32>;
-				clocks = <&clks 30>, <&clks 31>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+				         <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -376,14 +433,14 @@
 				compatible = "fsl,imx51-iim", "fsl,imx27-iim";
 				reg = <0x83f98000 0x4000>;
 				interrupts = <69>;
-				clocks = <&clks 107>;
+				clocks = <&clks IMX5_CLK_IIM_GATE>;
 			};
 
 			owire: owire@83fa4000 {
 				compatible = "fsl,imx51-owire", "fsl,imx21-owire";
 				reg = <0x83fa4000 0x4000>;
 				interrupts = <88>;
-				clocks = <&clks 159>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
 				status = "disabled";
 			};
 
@@ -393,7 +450,8 @@
 				compatible = "fsl,imx51-ecspi";
 				reg = <0x83fac000 0x4000>;
 				interrupts = <37>;
-				clocks = <&clks 53>, <&clks 54>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -402,7 +460,8 @@
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
-				clocks = <&clks 56>, <&clks 56>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+				         <&clks IMX5_CLK_SDMA_GATE>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
@@ -414,7 +473,8 @@
 				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
 				reg = <0x83fc0000 0x4000>;
 				interrupts = <38>;
-				clocks = <&clks 55>, <&clks 55>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -425,7 +485,7 @@
 				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 				reg = <0x83fc4000 0x4000>;
 				interrupts = <63>;
-				clocks = <&clks 35>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
 				status = "disabled";
 			};
 
@@ -435,7 +495,7 @@
 				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 				reg = <0x83fc8000 0x4000>;
 				interrupts = <62>;
-				clocks = <&clks 34>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
 				status = "disabled";
 			};
 
@@ -443,7 +503,7 @@
 				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 				reg = <0x83fcc000 0x4000>;
 				interrupts = <29>;
-				clocks = <&clks 48>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
 				dmas = <&sdma 28 0 0>,
 				       <&sdma 29 0 0>;
 				dma-names = "rx", "tx";
@@ -455,6 +515,8 @@
 			audmux: audmux@83fd0000 {
 				compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
 				reg = <0x83fd0000 0x4000>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				clock-names = "audmux";
 				status = "disabled";
 			};
 
@@ -463,7 +525,7 @@
 				#size-cells = <1>;
 				compatible = "fsl,imx51-weim";
 				reg = <0x83fda000 0x1000>;
-				clocks = <&clks 57>;
+				clocks = <&clks IMX5_CLK_EMI_SLOW_GATE>;
 				ranges = <
 					0 0 0xb0000000 0x08000000
 					1 0 0xb8000000 0x08000000
@@ -476,10 +538,12 @@
 			};
 
 			nfc: nand@83fdb000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
 				compatible = "fsl,imx51-nand";
 				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
 				interrupts = <8>;
-				clocks = <&clks 60>;
+				clocks = <&clks IMX5_CLK_NFC_GATE>;
 				status = "disabled";
 			};
 
@@ -487,7 +551,7 @@
 				compatible = "fsl,imx51-pata", "fsl,imx27-pata";
 				reg = <0x83fe0000 0x4000>;
 				interrupts = <70>;
-				clocks = <&clks 172>;
+				clocks = <&clks IMX5_CLK_PATA_GATE>;
 				status = "disabled";
 			};
 
@@ -495,7 +559,7 @@
 				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 				reg = <0x83fe8000 0x4000>;
 				interrupts = <96>;
-				clocks = <&clks 50>;
+				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
 				dmas = <&sdma 46 0 0>,
 				       <&sdma 47 0 0>;
 				dma-names = "rx", "tx";
@@ -508,336 +572,12 @@
 				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
 				reg = <0x83fec000 0x4000>;
 				interrupts = <87>;
-				clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
 		};
 	};
 };
-
-&iomuxc {
-	audmux {
-		pinctrl_audmux_1: audmuxgrp-1 {
-			fsl,pins = <
-				MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
-				MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
-				MX51_PAD_AUD3_BB_CK__AUD3_TXC  0x80000000
-				MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
-			>;
-		};
-	};
-
-	fec {
-		pinctrl_fec_1: fecgrp-1 {
-			fsl,pins = <
-				MX51_PAD_EIM_EB2__FEC_MDIO	   0x80000000
-				MX51_PAD_EIM_EB3__FEC_RDATA1	   0x80000000
-				MX51_PAD_EIM_CS2__FEC_RDATA2	   0x80000000
-				MX51_PAD_EIM_CS3__FEC_RDATA3	   0x80000000
-				MX51_PAD_EIM_CS4__FEC_RX_ER	   0x80000000
-				MX51_PAD_EIM_CS5__FEC_CRS	   0x80000000
-				MX51_PAD_NANDF_RB2__FEC_COL	   0x80000000
-				MX51_PAD_NANDF_RB3__FEC_RX_CLK	   0x80000000
-				MX51_PAD_NANDF_D9__FEC_RDATA0	   0x80000000
-				MX51_PAD_NANDF_D8__FEC_TDATA0	   0x80000000
-				MX51_PAD_NANDF_CS2__FEC_TX_ER	   0x80000000
-				MX51_PAD_NANDF_CS3__FEC_MDC	   0x80000000
-				MX51_PAD_NANDF_CS4__FEC_TDATA1	   0x80000000
-				MX51_PAD_NANDF_CS5__FEC_TDATA2	   0x80000000
-				MX51_PAD_NANDF_CS6__FEC_TDATA3	   0x80000000
-				MX51_PAD_NANDF_CS7__FEC_TX_EN	   0x80000000
-				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
-			>;
-		};
-
-		pinctrl_fec_2: fecgrp-2 {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER	  0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS	  0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC	  0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO	  0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2	  0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3   0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER	  0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1	  0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2	  0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3	  0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN	  0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL	  0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK  0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV	  0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK  0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0  0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0  0x80000000
-			>;
-		};
-	};
-
-	ecspi1 {
-		pinctrl_ecspi1_1: ecspi1grp-1 {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
-			>;
-		};
-	};
-
-	ecspi2 {
-		pinctrl_ecspi2_1: ecspi2grp-1 {
-			fsl,pins = <
-				MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
-				MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
-				MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
-			>;
-		};
-	};
-
-	esdhc1 {
-		pinctrl_esdhc1_1: esdhc1grp-1 {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD     0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK     0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
-			>;
-		};
-	};
-
-	esdhc2 {
-		pinctrl_esdhc2_1: esdhc2grp-1 {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD     0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK     0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
-			>;
-		};
-	};
-
-	i2c2 {
-		pinctrl_i2c2_1: i2c2grp-1 {
-			fsl,pins = <
-				MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
-				MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
-			>;
-		};
-
-		pinctrl_i2c2_2: i2c2grp-2 {
-			fsl,pins = <
-				MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed
-				MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed
-			>;
-		};
-
-		pinctrl_i2c2_3: i2c2grp-3 {
-			fsl,pins = <
-				MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed
-				MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed
-			>;
-		};
-	};
-
-	ipu_disp1 {
-		pinctrl_ipu_disp1_1: ipudisp1grp-1 {
-			fsl,pins = <
-				MX51_PAD_DISP1_DAT0__DISP1_DAT0	  0x5
-				MX51_PAD_DISP1_DAT1__DISP1_DAT1	  0x5
-				MX51_PAD_DISP1_DAT2__DISP1_DAT2	  0x5
-				MX51_PAD_DISP1_DAT3__DISP1_DAT3	  0x5
-				MX51_PAD_DISP1_DAT4__DISP1_DAT4	  0x5
-				MX51_PAD_DISP1_DAT5__DISP1_DAT5	  0x5
-				MX51_PAD_DISP1_DAT6__DISP1_DAT6	  0x5
-				MX51_PAD_DISP1_DAT7__DISP1_DAT7	  0x5
-				MX51_PAD_DISP1_DAT8__DISP1_DAT8	  0x5
-				MX51_PAD_DISP1_DAT9__DISP1_DAT9	  0x5
-				MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
-				MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
-				MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
-				MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
-				MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
-				MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
-				MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
-				MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
-				MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
-				MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
-				MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
-				MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
-				MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
-				MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
-				MX51_PAD_DI1_PIN2__DI1_PIN2	  0x5 /* hsync */
-				MX51_PAD_DI1_PIN3__DI1_PIN3	  0x5 /* vsync */
-			>;
-		};
-	};
-
-	ipu_disp2 {
-		pinctrl_ipu_disp2_1: ipudisp2grp-1 {
-			fsl,pins = <
-				MX51_PAD_DISP2_DAT0__DISP2_DAT0	    0x5
-				MX51_PAD_DISP2_DAT1__DISP2_DAT1	    0x5
-				MX51_PAD_DISP2_DAT2__DISP2_DAT2	    0x5
-				MX51_PAD_DISP2_DAT3__DISP2_DAT3	    0x5
-				MX51_PAD_DISP2_DAT4__DISP2_DAT4	    0x5
-				MX51_PAD_DISP2_DAT5__DISP2_DAT5	    0x5
-				MX51_PAD_DISP2_DAT6__DISP2_DAT6	    0x5
-				MX51_PAD_DISP2_DAT7__DISP2_DAT7	    0x5
-				MX51_PAD_DISP2_DAT8__DISP2_DAT8	    0x5
-				MX51_PAD_DISP2_DAT9__DISP2_DAT9	    0x5
-				MX51_PAD_DISP2_DAT10__DISP2_DAT10   0x5
-				MX51_PAD_DISP2_DAT11__DISP2_DAT11   0x5
-				MX51_PAD_DISP2_DAT12__DISP2_DAT12   0x5
-				MX51_PAD_DISP2_DAT13__DISP2_DAT13   0x5
-				MX51_PAD_DISP2_DAT14__DISP2_DAT14   0x5
-				MX51_PAD_DISP2_DAT15__DISP2_DAT15   0x5
-				MX51_PAD_DI2_PIN2__DI2_PIN2	    0x5 /* hsync */
-				MX51_PAD_DI2_PIN3__DI2_PIN3	    0x5 /* vsync */
-				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 /* CLK */
-				MX51_PAD_DI_GP4__DI2_PIN15	    0x5 /* DE */
-			>;
-		};
-	};
-
-	kpp {
-		pinctrl_kpp_1: kppgrp-1 {
-			fsl,pins = <
-				MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0
-				MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0
-				MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0
-				MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0
-				MX51_PAD_KEY_COL0__KEY_COL0 0xe8
-				MX51_PAD_KEY_COL1__KEY_COL1 0xe8
-				MX51_PAD_KEY_COL2__KEY_COL2 0xe8
-				MX51_PAD_KEY_COL3__KEY_COL3 0xe8
-			>;
-		};
-	};
-
-	pata {
-		pinctrl_pata_1: patagrp-1 {
-			fsl,pins = <
-				MX51_PAD_NANDF_WE_B__PATA_DIOW	   0x2004
-				MX51_PAD_NANDF_RE_B__PATA_DIOR	   0x2004
-				MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004
-				MX51_PAD_NANDF_CLE__PATA_RESET_B   0x2004
-				MX51_PAD_NANDF_WP_B__PATA_DMACK	   0x2004
-				MX51_PAD_NANDF_RB0__PATA_DMARQ	   0x2004
-				MX51_PAD_NANDF_RB1__PATA_IORDY	   0x2004
-				MX51_PAD_GPIO_NAND__PATA_INTRQ	   0x2004
-				MX51_PAD_NANDF_CS2__PATA_CS_0	   0x2004
-				MX51_PAD_NANDF_CS3__PATA_CS_1	   0x2004
-				MX51_PAD_NANDF_CS4__PATA_DA_0	   0x2004
-				MX51_PAD_NANDF_CS5__PATA_DA_1	   0x2004
-				MX51_PAD_NANDF_CS6__PATA_DA_2	   0x2004
-				MX51_PAD_NANDF_D15__PATA_DATA15	   0x2004
-				MX51_PAD_NANDF_D14__PATA_DATA14	   0x2004
-				MX51_PAD_NANDF_D13__PATA_DATA13	   0x2004
-				MX51_PAD_NANDF_D12__PATA_DATA12	   0x2004
-				MX51_PAD_NANDF_D11__PATA_DATA11	   0x2004
-				MX51_PAD_NANDF_D10__PATA_DATA10	   0x2004
-				MX51_PAD_NANDF_D9__PATA_DATA9	   0x2004
-				MX51_PAD_NANDF_D8__PATA_DATA8	   0x2004
-				MX51_PAD_NANDF_D7__PATA_DATA7	   0x2004
-				MX51_PAD_NANDF_D6__PATA_DATA6	  0x2004
-				MX51_PAD_NANDF_D5__PATA_DATA5	  0x2004
-				MX51_PAD_NANDF_D4__PATA_DATA4	  0x2004
-				MX51_PAD_NANDF_D3__PATA_DATA3	  0x2004
-				MX51_PAD_NANDF_D2__PATA_DATA2	  0x2004
-				MX51_PAD_NANDF_D1__PATA_DATA1	  0x2004
-				MX51_PAD_NANDF_D0__PATA_DATA0	  0x2004
-			>;
-		};
-	};
-
-	uart1 {
-		pinctrl_uart1_1: uart1grp-1 {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
-			>;
-		};
-
-		pinctrl_uart1_rtscts_1: uart1rtscts-1 {
-			fsl,pins = <
-				MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
-				MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
-			>;
-		};
-	};
-
-	uart2 {
-		pinctrl_uart2_1: uart2grp-1 {
-			fsl,pins = <
-				MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
-				MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
-			>;
-		};
-	};
-
-	uart3 {
-		pinctrl_uart3_1: uart3grp-1 {
-			fsl,pins = <
-				MX51_PAD_EIM_D25__UART3_RXD 0x1c5
-				MX51_PAD_EIM_D26__UART3_TXD 0x1c5
-			>;
-		};
-
-		pinctrl_uart3_rtscts_1: uart3rtscts-1 {
-			fsl,pins = <
-				MX51_PAD_EIM_D27__UART3_RTS 0x1c5
-				MX51_PAD_EIM_D24__UART3_CTS 0x1c5
-			>;
-		};
-
-		pinctrl_uart3_2: uart3grp-2 {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
-			>;
-		};
-	};
-
-	usbh1 {
-		pinctrl_usbh1_1: usbh1grp-1 {
-			fsl,pins = <
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
-				MX51_PAD_USBH1_CLK__USBH1_CLK	  0x1e5
-				MX51_PAD_USBH1_DIR__USBH1_DIR	  0x1e5
-				MX51_PAD_USBH1_NXT__USBH1_NXT	  0x1e5
-				MX51_PAD_USBH1_STP__USBH1_STP	  0x1e5
-			>;
-		};
-	};
-
-	usbh2 {
-		pinctrl_usbh2_1: usbh2grp-1 {
-			fsl,pins = <
-				MX51_PAD_EIM_D16__USBH2_DATA0 0x1e5
-				MX51_PAD_EIM_D17__USBH2_DATA1 0x1e5
-				MX51_PAD_EIM_D18__USBH2_DATA2 0x1e5
-				MX51_PAD_EIM_D19__USBH2_DATA3 0x1e5
-				MX51_PAD_EIM_D20__USBH2_DATA4 0x1e5
-				MX51_PAD_EIM_D21__USBH2_DATA5 0x1e5
-				MX51_PAD_EIM_D22__USBH2_DATA6 0x1e5
-				MX51_PAD_EIM_D23__USBH2_DATA7 0x1e5
-				MX51_PAD_EIM_A24__USBH2_CLK   0x1e5
-				MX51_PAD_EIM_A25__USBH2_DIR   0x1e5
-				MX51_PAD_EIM_A27__USBH2_NXT   0x1e5
-				MX51_PAD_EIM_A26__USBH2_STP   0x1e5
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 174f86938c89..e9337ad52f59 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -49,9 +49,12 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -99,7 +102,7 @@
 
 &esdhc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1_2>;
+	pinctrl-0 = <&pinctrl_esdhc1>;
 	cd-gpios = <&gpio1 1 0>;
 	wp-gpios = <&gpio1 9 0>;
 	status = "okay";
@@ -109,7 +112,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	hog {
+	imx53-ard {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX53_PAD_GPIO_1__GPIO1_1             0x80000000
@@ -148,11 +151,33 @@
 				MX53_PAD_EIM_CS1__EMI_WEIM_CS_1	     0x80000000
 			>;
 		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_PATA_DATA8__ESDHC1_DAT4	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC1_DAT5	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC1_DAT6	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC1_DAT7	0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
 	};
 };
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_2>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
deleted file mode 100644
index 801fda728ed6..000000000000
--- a/arch/arm/boot/dts/imx53-evk.dts
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Evaluation Kit";
-	compatible = "fsl,imx53-evk", "fsl,imx53";
-
-	memory {
-		reg = <0x70000000 0x80000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		green {
-			label = "Heartbeat";
-			gpios = <&gpio7 7 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1_1>;
-	cd-gpios = <&gpio3 13 0>;
-	wp-gpios = <&gpio3 14 0>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1>;
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
-	status = "okay";
-
-	flash: at45db321d@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "Kernel";
-			reg = <0x40000 0x3c0000>;
-		};
-	};
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3_1>;
-	cd-gpios = <&gpio3 11 0>;
-	wp-gpios = <&gpio3 12 0>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_EIM_EB2__GPIO2_30  0x80000000
-				MX53_PAD_EIM_D19__GPIO3_19  0x80000000
-				MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
-				MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
-				MX53_PAD_EIM_DA13__GPIO3_13 0x80000000
-				MX53_PAD_EIM_DA14__GPIO3_14 0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
-				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_1>;
-	status = "okay";
-
-	pmic: mc13892@08 {
-		compatible = "fsl,mc13892", "fsl,mc13xxx";
-		reg = <0x08>;
-	};
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec_1>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 0>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index 7d304d02ed38..d5d146a8b149 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -17,16 +17,16 @@
 	compatible = "denx,imx53-m53evk", "fsl,imx53";
 
 	memory {
-		reg = <0x70000000 0x20000000>;
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
 	};
 
 	soc {
-		display@di1 {
+		display1: display@di1 {
 			compatible = "fsl,imx-parallel-display";
-			crtcs = <&ipu 1>;
 			interface-pix-fmt = "bgr666";
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_ipu_disp2_1>;
+			pinctrl-0 = <&pinctrl_ipu_disp1>;
 
 			display-timings {
 				800x480p60 {
@@ -44,6 +44,12 @@
 				};
 			};
 		};
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
 	};
 
 	backlight {
@@ -51,6 +57,7 @@
 		pwms = <&pwm1 0 3000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
+		power-supply = <&reg_backlight>;
 	};
 
 	leds {
@@ -73,14 +80,36 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p2v: 3p2v {
+		reg_3p2v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P2V";
 			regulator-min-microvolt = <3200000>;
 			regulator-max-microvolt = <3200000>;
 			regulator-always-on;
 		};
+
+
+		reg_backlight: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "lcd-supply";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_usbh1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 2 0>;
+		};
 	};
 
 	sound {
@@ -102,25 +131,25 @@
 
 &audmux {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_2>;
+	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 };
 
 &can1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1_3>;
+	pinctrl-0 = <&pinctrl_can1>;
 	status = "okay";
 };
 
 &can2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2_1>;
+	pinctrl-0 = <&pinctrl_can2>;
 	status = "okay";
 };
 
 &esdhc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1_1>;
+	pinctrl-0 = <&pinctrl_esdhc1>;
 	cd-gpios = <&gpio1 1 0>;
 	wp-gpios = <&gpio1 9 0>;
 	status = "okay";
@@ -128,14 +157,14 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec_1>;
+	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
 	status = "okay";
 };
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_2>;
+	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
 	sgtl5000: codec@0a {
@@ -143,13 +172,13 @@
 		reg = <0x0a>;
 		VDDA-supply = <&reg_3p2v>;
 		VDDIO-supply = <&reg_3p2v>;
-		clocks = <&clks 150>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
 	};
 };
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_2>;
+	pinctrl-0 = <&pinctrl_i2c2>;
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -165,17 +194,17 @@
 		irq-trigger = <0x1>;
 
 		stmpe_touchscreen {
-			compatible = "stmpe,ts";
+			compatible = "st,stmpe-ts";
 			reg = <0>;
-			ts,sample-time = <4>;
-			ts,mod-12b = <1>;
-			ts,ref-sel = <0>;
-			ts,adc-freq = <1>;
-			ts,ave-ctrl = <3>;
-			ts,touch-det-delay = <3>;
-			ts,settling = <4>;
-			ts,fraction-z = <7>;
-			ts,i-drive = <1>;
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <3>;
+			st,touch-det-delay = <3>;
+			st,settling = <4>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
 		};
 	};
 
@@ -193,7 +222,7 @@
 
 &i2c3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3_1>;
+	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 };
 
@@ -201,14 +230,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	hog {
+	imx53-m53evk {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
 				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
 				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
-				MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
-
+				MX53_PAD_GPIO_2__GPIO1_2		0x80000000
+				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
 			>;
 		};
 
@@ -218,12 +247,172 @@
 				MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
 			>;
 		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
+				MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
+				MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
+				MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
+				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
+				MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_ipu_disp1: ipudisp1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
+				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
+				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
+				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
+				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
+				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
+				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
+				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
+				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
+				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
+				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
+				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
+				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
+				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
+				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
+				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
+				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
+				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
+				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
+				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
+				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
+				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
+				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
+				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
+				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
+				MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
+				MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
+				MX53_PAD_EIM_DA15__IPU_DI1_PIN1		0x5
+				MX53_PAD_EIM_DA11__IPU_DI1_PIN2		0x5
+				MX53_PAD_EIM_DA12__IPU_DI1_PIN3		0x5
+				MX53_PAD_EIM_A25__IPU_DI1_PIN12		0x5
+				MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+			>;
+		};
 	};
 };
 
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
 &nfc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand_1>;
+	pinctrl-0 = <&pinctrl_nand>;
 	nand-bus-width = <8>;
 	nand-ecc-mode = "hw";
 	status = "okay";
@@ -231,7 +420,11 @@
 
 &pwm1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1_1>;
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&sata {
 	status = "okay";
 };
 
@@ -242,18 +435,29 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_2>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
+	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_1>;
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index a63090267941..3e3f17aa93a1 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -17,12 +17,8 @@
 	model = "TQ MBa53 starter kit";
 	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
 
-	reg_backlight: fixed@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-supply";
-		gpio = <&gpio2 5 0>;
-		startup-delay-us = <5000>;
-		enable-active-low;
+	chosen {
+		stdout-path = &uart2;
 	};
 
 	backlight {
@@ -38,17 +34,37 @@
 		compatible = "fsl,imx-parallel-display";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_disp1_1>;
-		crtcs = <&ipu 1>;
 		interface-pix-fmt = "rgb24";
 		status = "disabled";
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
 	};
 
-	reg_3p2v: 3p2v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P2V";
-		regulator-min-microvolt = <3200000>;
-		regulator-max-microvolt = <3200000>;
-		regulator-always-on;
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_backlight: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "lcd-supply";
+			gpio = <&gpio2 5 0>;
+			startup-delay-us = <5000>;
+		};
+
+		reg_3p2v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
 	};
 
 	sound {
@@ -141,6 +157,10 @@
 	};
 };
 
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
 &cspi {
 	status = "okay";
 };
@@ -148,14 +168,14 @@
 &audmux {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
+	pinctrl-0 = <&pinctrl_audmux>;
 };
 
 &i2c2 {
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 150>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
 		VDDA-supply = <&reg_3p2v>;
 		VDDIO-supply = <&reg_3p2v>;
 	};
@@ -228,7 +248,7 @@
 &tve {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_vga_sync_1>;
-	ddc = <&i2c3>;
+	ddc-i2c-bus = <&i2c3>;
 	fsl,tve-mode = "vga";
 	fsl,hsync-pin = <4>;
 	fsl,vsync-pin = <6>;
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
new file mode 100644
index 000000000000..fd8c60dde7de
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -0,0 +1,367 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	display0: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb565";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+		status = "disabled";
+		display-timings {
+			claawvga {
+				native-mode;
+				clock-frequency = <27000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <60>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				hsync-len = <20>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio1 8 0>;
+			linux,code = <116>; /* KEY_POWER */
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 0>;
+			linux,code = <115>; /* KEY_VOLUMEUP */
+			gpio-key,wakeup;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 0>;
+			linux,code = <114>; /* KEY_VOLUMEDOWN */
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio7_7>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio7 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p2v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_usb_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 8 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx53-qsb-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-qsb-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	cd-gpios = <&gpio3 11 0>;
+	wp-gpios = <&gpio3 12 0>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-qsb {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
+				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
+				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
+				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
+				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
+				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
+				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
+			>;
+		};
+
+		led_pin_gpio7_7: led_gpio7_7@0 {
+			fsl,pins = <
+				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_ipu_disp0: ipudisp0grp {
+			fsl,pins = <
+				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+			>;
+		};
+
+		pinctrl_vga_sync: vgasync-grp {
+			fsl,pins = <
+				/* VGA_HSYNC, VSYNC with max drive strength */
+				MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
+				MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			>;
+		};
+	};
+};
+
+&tve {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vga_sync>;
+	fsl,tve-mode = "vga";
+	fsl,hsync-pin = <4>;
+	fsl,vsync-pin = <6>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 0>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 91a5935a4aac..dec4b073ceb1 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -11,193 +11,14 @@
  */
 
 /dts-v1/;
-#include "imx53.dtsi"
+#include "imx53-qsb-common.dtsi"
 
 / {
 	model = "Freescale i.MX53 Quick Start Board";
 	compatible = "fsl,imx53-qsb", "fsl,imx53";
-
-	memory {
-		reg = <0x70000000 0x40000000>;
-	};
-
-	display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		crtcs = <&ipu 0>;
-		interface-pix-fmt = "rgb565";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp0_1>;
-		status = "disabled";
-		display-timings {
-			claawvga {
-				native-mode;
-				clock-frequency = <27000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <40>;
-				hfront-porch = <60>;
-				vback-porch = <10>;
-				vfront-porch = <10>;
-				hsync-len = <20>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio1 8 0>;
-			linux,code = <116>; /* KEY_POWER */
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
-			gpio-key,wakeup;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
-			gpio-key,wakeup;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio7_7>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio7 7 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_3p2v: 3p2v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-
-		reg_usb_vbus: usb_vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio7 8 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx53-qsb-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-qsb-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1_1>;
-	status = "okay";
-};
-
-&ssi2 {
-	fsl,mode = "i2s-slave";
-	status = "okay";
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3_1>;
-	cd-gpios = <&gpio3 11 0>;
-	wp-gpios = <&gpio3 12 0>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
-				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
-				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
-				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
-				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
-				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
-				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
-				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
-			>;
-		};
-
-		led_pin_gpio7_7: led_gpio7_7@0 {
-			fsl,pins = <
-				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
-			>;
-		};
-	};
-
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_1>;
-	status = "okay";
-
-	sgtl5000: codec@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-		clocks = <&clks 150>;
-	};
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-	status = "okay";
-
-	accelerometer: mma8450@1c {
-		compatible = "fsl,mma8450";
-		reg = <0x1c>;
-	};
-
 	pmic: dialog@48 {
 		compatible = "dlg,da9053-aa", "dlg,da9052";
 		reg = <0x48>;
@@ -292,32 +113,3 @@
 		};
 	};
 };
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec_1>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 0>;
-	status = "okay";
-};
-
-&vpu {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
new file mode 100644
index 000000000000..f1bbf9a32991
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -0,0 +1,158 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx53-qsb-common.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Quick Start-R Board";
+	compatible = "fsl,imx53-qsrb", "fsl,imx53";
+};
+
+&iomuxc {
+	i2c1 {
+		/* open drain */
+		pinctrl_i2c1_qsrb: i2c1grp-1 {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__I2C1_SDA      0x400001ec
+				MX53_PAD_CSI0_DAT9__I2C1_SCL      0x400001ec
+			>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_qsrb>;
+	status = "okay";
+
+	pmic: mc34708@8 {
+		compatible = "fsl,mc34708";
+		reg = <0x08>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 0x8>;
+		regulators {
+			sw1_reg: sw1a {
+				regulator-name = "SW1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1437500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw1b_reg: sw1b {
+				regulator-name = "SW1B";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1437500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "SW2";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1437500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-name = "SW3";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1425000>;
+				regulator-boot-on;
+			};
+
+			sw4a_reg: sw4a {
+				regulator-name = "SW4A";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4b_reg: sw4b {
+				regulator-name = "SW4B";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw5_reg: sw5 {
+				regulator-name = "SW5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-name = "SWBST";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-name = "VPLL";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			vrefddr_reg: vrefddr {
+				regulator-name = "VREFDDR";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-name = "VUSB";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-name = "VUSB2";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdac_reg: vdac {
+				regulator-name = "VDAC";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-name = "VGEN1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-name = "VGEN2";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index a9b6e10de0a5..5ec1590ff7bc 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -40,7 +40,7 @@
 
 &esdhc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1_1>;
+	pinctrl-0 = <&pinctrl_esdhc1>;
 	cd-gpios = <&gpio3 13 0>;
 	wp-gpios = <&gpio4 11 0>;
 	status = "okay";
@@ -48,21 +48,21 @@
 
 &esdhc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2_1>;
+	pinctrl-0 = <&pinctrl_esdhc2>;
 	non-removable;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_1>;
+	pinctrl-0 = <&pinctrl_uart3>;
 	fsl,uart-has-rtscts;
 	status = "okay";
 };
 
 &ecspi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
 	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
 	status = "okay";
@@ -95,7 +95,7 @@
 
 &esdhc3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3_1>;
+	pinctrl-0 = <&pinctrl_esdhc3>;
 	non-removable;
 	status = "okay";
 };
@@ -104,7 +104,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	hog {
+	imx53-smd {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
@@ -116,24 +116,121 @@
 				MX53_PAD_PATA_DA_0__GPIO7_6    0x80000000
 			>;
 		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+			>;
+		};
 	};
 };
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
+	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_1>;
+	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
 	codec: sgtl5000@0a {
@@ -154,7 +251,7 @@
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
+	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
 	accelerometer: mma8450@1c {
@@ -175,7 +272,7 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec_1>;
+	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio7 6 0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index abd72af545bf..4f1f0e2868bf 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -22,9 +22,12 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -35,8 +38,8 @@
 
 &esdhc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2_1>,
-		    <&pinctrl_tqma53_esdhc2_2>;
+	pinctrl-0 = <&pinctrl_esdhc2>,
+		    <&pinctrl_esdhc2_cdwp>;
 	vmmc-supply = <&reg_3p3v>;
 	wp-gpios = <&gpio1 2 0>;
 	cd-gpios = <&gpio1 4 0>;
@@ -45,13 +48,13 @@
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_2>;
+	pinctrl-0 = <&pinctrl_uart3>;
 	status = "disabled";
 };
 
 &ecspi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
 	fsl,spi-num-chipselects = <4>;
 	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
 		   <&gpio3 24 0>, <&gpio3 25 0>;
@@ -60,7 +63,7 @@
 
 &esdhc3 { /* EMMC */
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3_1>;
+	pinctrl-0 = <&pinctrl_esdhc3>;
 	vmmc-supply = <&reg_3p3v>;
 	non-removable;
 	bus-width = <8>;
@@ -71,27 +74,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	esdhc2_2 {
-		pinctrl_tqma53_esdhc2_2: esdhc2-tqma53-grp2 {
-			fsl,pins = <
-				MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
-				MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
-			>;
-		};
-	};
-
-	i2s {
-		pinctrl_i2s_1: i2s-grp1 {
-			fsl,pins = <
-				 MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC  0x80000000 /* I2S_SCLK */
-				 MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD  0x80000000 /* I2S_DOUT */
-				 MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 /* I2S_LRCLK */
-				 MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD  0x80000000 /* I2S_DIN */
-			>;
-		};
-	};
-
-	hog {
+	imx53-tqma53 {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
@@ -107,43 +90,165 @@
 				 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
 			>;
 		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL2__CAN1_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW2__CAN1_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_cspi: cspigrp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__CSPI_MISO		0x1d5
+				MX53_PAD_SD1_CMD__CSPI_MOSI		0x1d5
+				MX53_PAD_SD1_CLK__CSPI_SCLK		0x1d5
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc2_cdwp: esdhc2cdwp {
+			fsl,pins = <
+				MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
+				MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
+			>;
+		};
+
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			>;
+		};
 	};
 };
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_2>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	fsl,uart-has-rtscts;
 	status = "disabled";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
+	pinctrl-0 = <&pinctrl_uart2>;
 	status = "disabled";
 };
 
 &can1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1_2>;
+	pinctrl-0 = <&pinctrl_can1>;
 	status = "disabled";
 };
 
 &can2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2_1>;
+	pinctrl-0 = <&pinctrl_can2>;
 	status = "disabled";
 };
 
 &i2c3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3_1>;
+	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "disabled";
 };
 
 &cspi {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi_1>;
+	pinctrl-0 = <&pinctrl_cspi>;
 	fsl,spi-num-chipselects = <3>;
 	cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
 		   <&gpio1 21 0>;
@@ -152,7 +257,7 @@
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_1>;
+	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
 	pmic: mc34708@8 {
@@ -177,7 +282,7 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec_1>;
+	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
new file mode 100644
index 000000000000..3b73e81dc3f0
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -0,0 +1,324 @@
+/*
+ * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module (LCD)";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	aliases {
+		display = &display;
+	};
+
+	soc {
+		display: display@di0 {
+			compatible = "fsl,imx-parallel-display";
+			interface-pix-fmt = "rgb24";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_rgb24_vga1>;
+			status = "okay";
+
+			port {
+				display0_in: endpoint {
+					remote-endpoint = <&ipu_di0_disp0>;
+				};
+			};
+
+			display-timings {
+				VGA {
+					clock-frequency = <25200000>;
+					hactive = <640>;
+					vactive = <480>;
+					hback-porch = <48>;
+					hsync-len = <96>;
+					hfront-porch = <16>;
+					vback-porch = <31>;
+					vsync-len = <2>;
+					vfront-porch = <12>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <0>;
+				};
+
+				ETV570 {
+					clock-frequency = <25200000>;
+					hactive = <640>;
+					vactive = <480>;
+					hback-porch = <114>;
+					hsync-len = <30>;
+					hfront-porch = <16>;
+					vback-porch = <32>;
+					vsync-len = <3>;
+					vfront-porch = <10>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <0>;
+				};
+
+				ET0350 {
+					clock-frequency = <6413760>;
+					hactive = <320>;
+					vactive = <240>;
+					hback-porch = <34>;
+					hsync-len = <34>;
+					hfront-porch = <20>;
+					vback-porch = <15>;
+					vsync-len = <3>;
+					vfront-porch = <4>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <0>;
+				};
+
+				ET0430 {
+					clock-frequency = <9009000>;
+					hactive = <480>;
+					vactive = <272>;
+					hback-porch = <2>;
+					hsync-len = <41>;
+					hfront-porch = <2>;
+					vback-porch = <2>;
+					vsync-len = <10>;
+					vfront-porch = <2>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <1>;
+				};
+
+				ET0500 {
+					clock-frequency = <33264000>;
+					hactive = <800>;
+					vactive = <480>;
+					hback-porch = <88>;
+					hsync-len = <128>;
+					hfront-porch = <40>;
+					vback-porch = <33>;
+					vsync-len = <2>;
+					vfront-porch = <10>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <0>;
+				};
+
+				ET0700 { /* same as ET0500 */
+					clock-frequency = <33264000>;
+					hactive = <800>;
+					vactive = <480>;
+					hback-porch = <88>;
+					hsync-len = <128>;
+					hfront-porch = <40>;
+					vback-porch = <33>;
+					vsync-len = <2>;
+					vfront-porch = <10>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <0>;
+				};
+
+				ETQ570 {
+					clock-frequency = <6596040>;
+					hactive = <320>;
+					vactive = <240>;
+					hback-porch = <38>;
+					hsync-len = <30>;
+					hfront-porch = <30>;
+					vback-porch = <16>;
+					vsync-len = <3>;
+					vfront-porch = <4>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <0>;
+				};
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	regulators {
+		reg_lcd_pwr: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "LCD POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		reg_lcd_reset: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "LCD RESET";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 0>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 0>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <660>;
+		linux,wakeup;
+	};
+};
+
+&iomuxc {
+	imx53-tx53-x03x {
+		pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 {
+			fsl,pins = <
+				MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
+				MX53_PAD_EIM_A16__GPIO2_22   0x04 /* Reset */
+				MX53_PAD_EIM_A17__GPIO2_21   0x04 /* Wake */
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
+				MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
+				MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
+				MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
+				MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
+				MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
+				MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
+				MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
+			>;
+		};
+
+		pinctrl_rgb24_vga1: rgb24-vgagrp1 {
+			fsl,pins = <
+				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		0x5
+				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
+				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			0x5
+				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			0x5
+				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
+				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
+				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
+				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
+				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
+				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
+				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
+				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
+				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
+				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
+				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
+				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
+				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
+				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
+				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
+				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
+				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
+				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
+				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
+				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
+				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
+				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
+				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
+				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
+			>;
+		};
+
+		pinctrl_tsc2007: tsc2007grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	/* sample keymap */
+	/* row/col 0,1 are mapped to KPP row/col 6,7 */
+	linux,keymap = <
+		MATRIX_KEY(6, 6, KEY_POWER)
+		MATRIX_KEY(6, 7, KEY_KP0)
+		MATRIX_KEY(6, 2, KEY_KP1)
+		MATRIX_KEY(6, 3, KEY_KP2)
+		MATRIX_KEY(7, 6, KEY_KP3)
+		MATRIX_KEY(7, 7, KEY_KP4)
+		MATRIX_KEY(7, 2, KEY_KP5)
+		MATRIX_KEY(7, 3, KEY_KP6)
+		MATRIX_KEY(2, 6, KEY_KP7)
+		MATRIX_KEY(2, 7, KEY_KP8)
+		MATRIX_KEY(2, 2, KEY_KP9)
+	>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
new file mode 100644
index 000000000000..64804719f0f4
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts
@@ -0,0 +1,243 @@
+/*
+ * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module (LVDS)";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	regulators {
+		reg_lcd_pwr0: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "LVDS0 POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		reg_lcd_pwr1: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "LVDS1 POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen2: eeti@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eeti2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <23 0>;
+		wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		linux,wakeup;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	touchscreen1: eeti@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eeti1>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		linux,wakeup;
+	};
+};
+
+&iomuxc {
+	imx53-tx53-x13x {
+		pinctrl_i2c2: i2c2-grp1 {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_lvds0: lvds0grp {
+			fsl,pins = <
+				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+			>;
+		};
+
+		pinctrl_lvds1: lvds1grp {
+			fsl,pins = <
+				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
+		};
+
+		pinctrl_eeti1: eeti1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
+			>;
+		};
+
+		pinctrl_eeti2: eeti2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "jeida";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds_timing0>;
+			lvds_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hsync-len = <60>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vsync-len = <10>;
+				vfront-porch = <7>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-mapping = "jeida";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds_timing1>;
+			lvds_timing1: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hsync-len = <60>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vsync-len = <10>;
+				vfront-porch = <7>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index f494766700a3..e348796ba689 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -1,122 +1,550 @@
 /*
- * Copyright 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright 2012 <LW@KARO-electronics.de>
+ * based on imx53-qsb.dts
+ *   Copyright 2011 Freescale Semiconductor, Inc.
+ *   Copyright 2011 Linaro Ltd.
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * Version 2 at the following locations:
  *
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "imx53.dtsi"
+#include "imx53.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Ka-Ro TX53";
+	model = "Ka-Ro electronics TX53 module";
 	compatible = "karo,tx53", "fsl,imx53";
 
-	memory {
-		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+	aliases {
+		can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
+		can1 = &can1;
+		ipu = &ipu;
+		reg_can_xcvr = &reg_can_xcvr;
+		usbh1 = &usbh1;
+		usbotg = &usbotg;
+	};
+
+	clocks {
+		ckih1 {
+			clock-frequency = <0>;
+		};
+
+		mclk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_key>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stk5led>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
 	};
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_2v5: regulator@0 {
 			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
+			reg = <0>;
+			regulator-name = "2V5";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+
+		reg_3v3: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3V3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
 		};
+
+		reg_can_xcvr: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_usbh1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usbh1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1_vbus>;
+			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usbotg_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usbotg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbotg_vbus>;
+			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
+		model = "tx53-audio-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		/* '1' based port numbers according to datasheet names */
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
 	};
 };
 
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	status = "okay";
+};
+
 &can1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1_2>;
-	status = "disabled";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
 };
 
 &can2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2_1>;
-	status = "disabled";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
 };
 
 &ecspi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_2>;
-	status = "disabled";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	fsl,spi-num-chipselects = <2>;
+	status = "okay";
+
+	cs-gpios = <
+		&gpio2 30 GPIO_ACTIVE_HIGH
+		&gpio3 19 GPIO_ACTIVE_HIGH
+	>;
+
+	spidev0: spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <54000000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <54000000>;
+	};
 };
 
 &esdhc1 {
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+	fsl,wp-controller;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1_2>;
-	status = "disabled";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
 };
 
 &esdhc2 {
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+	fsl,wp-controller;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2_1>;
-	status = "disabled";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	status = "okay";
 };
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec_1>;
+	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
-	status = "disabled";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+	phy-handle = <&phy0>;
+	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		interrupt-parent = <&gpio2>;
+		interrupts = <4>;
+		device_type = "ethernet-phy";
+	};
 };
 
-&i2c3 {
+&i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3_2>;
-	status = "disabled";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rtc1: ds1339@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ds1339>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <20 0>;
+	};
 };
 
-&owire {
+&iomuxc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire_1>;
-	status = "disabled";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-tx53 {
+		pinctrl_hog: hoggrp {
+			/* pins not in use by any device on the Starterkit board series */
+			fsl,pins = <
+				/* CMOS Sensor Interface */
+				MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
+				MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
+				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
+				MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
+				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
+				MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
+				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
+				MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
+				MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
+				MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
+				MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
+				MX53_PAD_GPIO_0__GPIO1_0 0x1f4
+				/* Module Specific Signal */
+				/* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
+				/* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
+				MX53_PAD_EIM_D29__GPIO3_29 0x1f4
+				MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
+				/* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
+				/* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
+				MX53_PAD_EIM_A19__GPIO2_19 0x1f4
+				MX53_PAD_EIM_A20__GPIO2_18 0x1f4
+				MX53_PAD_EIM_A21__GPIO2_17 0x1f4
+				MX53_PAD_EIM_A22__GPIO2_16 0x1f4
+				MX53_PAD_EIM_A23__GPIO6_6 0x1f4
+				MX53_PAD_EIM_A24__GPIO5_4 0x1f4
+				MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
+				MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
+				MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
+				MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
+				/* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
+				/* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
+				MX53_PAD_GPIO_13__GPIO4_3 0x1f4
+				MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
+				MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
+				MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
+				MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
+				MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
+				MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
+				MX53_PAD_EIM_OE__GPIO2_25 0x1f4
+				MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
+				MX53_PAD_EIM_RW__GPIO2_26 0x1f4
+				MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
+				MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
+				MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
+				MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
+				MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
+				MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
+				MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
+				MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
+				>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
+				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
+		};
+
+		pinctrl_ds1339: ds1339grp {
+			fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_19__ECSPI1_RDY		0x80000000
+				MX53_PAD_EIM_EB2__ECSPI1_SS0		0x80000000
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+				MX53_PAD_EIM_D19__ECSPI1_SS1		0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+				MX53_PAD_EIM_D24__GPIO3_24 0x1f0
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+				MX53_PAD_EIM_D25__GPIO3_25 0x1f0
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_gpio_key: gpio-keygrp {
+			fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
+				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
+				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
+				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
+				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
+				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
+				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
+				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
+				MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_1__PWM2_PWMO		0x80000000
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_ssi2: ssi2grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC	0x80000000
+				MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD	0x80000000
+				MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS	0x80000000
+				MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD	0x80000000
+				MX53_PAD_EIM_D27__GPIO3_27 0x1f0
+			>;
+		};
+
+		pinctrl_stk5led: stk5ledgrp {
+			fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1c5
+				MX53_PAD_PATA_IORDY__UART1_RTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1c5
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1c5
+				MX53_PAD_PATA_DIOR__UART2_RTS		0x1c5
+				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
+			>;
+		};
+
+		pinctrl_usbh1_vbus: usbh1-vbusgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
+			>;
+		};
+
+		pinctrl_usbotg_vbus: usbotg-vbusgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
+				MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
+			>;
+		};
+	};
+};
+
+&ipu {
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
 };
 
 &pwm2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2_1>;
-	status = "disabled";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <3>;
+};
+
+&sdma {
+	fsl,sdma-ram-script-name = "sdma-imx53.bin";
 };
 
 &ssi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
-	status = "disabled";
+	fsl,mode = "i2s-slave";
+	codec-handle = <&sgtl5000>;
+	status = "okay";
 };
 
 &ssi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_2>;
 	status = "disabled";
 };
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_2>,
-		    <&pinctrl_uart1_3>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	fsl,uart-has-rtscts;
-	status = "disabled";
+	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_2>;
+	pinctrl-0 = <&pinctrl_uart2>;
 	fsl,uart-has-rtscts;
-	status = "disabled";
+	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_1>;
+	pinctrl-0 = <&pinctrl_uart3>;
 	fsl,uart-has-rtscts;
-	status = "disabled";
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	phy_type = "utmi";
+	disable-over-current;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "peripheral";
+	disable-over-current;
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
new file mode 100644
index 000000000000..7f6711a48615
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-voipac-dmm-668.dtsi"
+
+/ {
+	sound {
+		compatible = "fsl,imx53-voipac-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-voipac-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio>;
+
+		led1 {
+			label = "led-red";
+			gpios = <&gpio3 29 0>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "led-orange";
+			gpios = <&gpio2 31 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-voipac {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SD2_CD */
+				MX53_PAD_EIM_D25__GPIO3_25	0x80000000
+				/* SD2_WP */
+				MX53_PAD_EIM_A19__GPIO2_19 	0x80000000
+			>;
+		};
+
+		led_pin_gpio: led_gpio {
+			fsl,pins = <
+				MX53_PAD_EIM_D29__GPIO3_29	0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31	0x80000000
+			>;
+		};
+
+		/* Keyboard controller */
+		pinctrl_kpp_1: kppgrp-1 {
+			fsl,pins = <
+				MX53_PAD_GPIO_9__KPP_COL_6	0xe8
+				MX53_PAD_GPIO_4__KPP_COL_7	0xe8
+				MX53_PAD_KEY_COL2__KPP_COL_2	0xe8
+				MX53_PAD_KEY_COL3__KPP_COL_3	0xe8
+				MX53_PAD_KEY_COL4__KPP_COL_4	0xe8
+				MX53_PAD_GPIO_2__KPP_ROW_6	0xe0
+				MX53_PAD_GPIO_5__KPP_ROW_7	0xe0
+				MX53_PAD_KEY_ROW2__KPP_ROW_2	0xe0
+				MX53_PAD_KEY_ROW3__KPP_ROW_3	0xe0
+				MX53_PAD_KEY_ROW4__KPP_ROW_4	0xe0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
+				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+			>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* SSI1 */
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio3 25 0>;
+	wp-gpios = <&gpio2 19 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&clks 150>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_1>;
+	linux,keymap = <
+			0x0203003b	/* KEY_F1 */
+			0x0603003c	/* KEY_F2 */
+			0x0207003d	/* KEY_F3 */
+			0x0607003e	/* KEY_F4 */
+			>;
+	keypad,num-rows = <8>;
+	keypad,num-columns = <1>;
+	status = "okay";
+};
+
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
new file mode 100644
index 000000000000..ba689fbd0e41
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
@@ -0,0 +1,277 @@
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Voipac i.MX53 X53-DMM-668";
+	compatible = "voipac,imx53-dmm-668", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>;
+	};
+
+	memory@b0000000 {
+		device_type = "memory";
+		reg = <0xb0000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 31 0>; /* PEN */
+			enable-active-high;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-voipac {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* Make DA9053 regulator functional */
+				MX53_PAD_GPIO_16__GPIO7_11	0x80000000
+				/* FEC Power enable */
+				MX53_PAD_GPIO_11__GPIO4_1	0x80000000
+				/* FEC RST */
+				MX53_PAD_GPIO_12__GPIO4_2	0x80000000
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+			>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	fsl,spi-num-chipselects = <4>;
+	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 2 0>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053-aa", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "BUCKCORE";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "BUCKPRO";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "BUCKMEM";
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1580000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-name = "BUCKPERI";
+				regulator-min-microvolt = <2370000>;
+				regulator-max-microvolt = <2630000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "ldo1_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "ldo3_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "ldo4_2v775";
+				regulator-min-microvolt = <2770000>;
+				regulator-max-microvolt = <2780000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-name = "ldo5_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-name = "ldo6_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-name = "ldo7_2v75";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-name = "ldo8_1v8";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-name = "ldo9_1v5";
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-name = "ldo10_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 4307e80b2d2e..6456a0084388 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -12,9 +12,13 @@
 
 #include "skeleton.dtsi"
 #include "imx53-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -25,6 +29,10 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		mmc3 = &esdhc4;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -45,6 +53,11 @@
 		};
 	};
 
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu_di0>, <&ipu_di1>;
+	};
+
 	tzic: tz-interrupt-controller@0fffc000 {
 		compatible = "fsl,imx53-tzic", "fsl,tzic";
 		interrupt-controller;
@@ -58,21 +71,25 @@
 
 		ckil {
 			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
 			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <22579200>;
 		};
 
 		ckih2 {
 			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
 			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
@@ -84,14 +101,63 @@
 		interrupt-parent = <&tzic>;
 		ranges;
 
+		sata: sata@10000000 {
+			compatible = "fsl,imx53-ahci";
+			reg = <0x10000000 0x1000>;
+			interrupts = <28>;
+			clocks = <&clks IMX5_CLK_SATA_GATE>,
+				 <&clks IMX5_CLK_SATA_REF>,
+				 <&clks IMX5_CLK_AHB>;
+			clock-names = "sata_gate", "sata_ref", "ahb";
+			status = "disabled";
+		};
+
 		ipu: ipu@18000000 {
-			#crtc-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,imx53-ipu";
-			reg = <0x18000000 0x080000000>;
+			reg = <0x18000000 0x08000000>;
 			interrupts = <11 10>;
-			clocks = <&clks 59>, <&clks 110>, <&clks 61>;
+			clocks = <&clks IMX5_CLK_IPU_GATE>,
+			         <&clks IMX5_CLK_IPU_DI0_GATE>,
+			         <&clks IMX5_CLK_IPU_DI1_GATE>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
+
+			ipu_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di0_lvds0: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds0_in>;
+				};
+			};
+
+			ipu_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu_di1_disp1: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di1_lvds1: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds1_in>;
+				};
+
+				ipu_di1_tve: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&tve_in>;
+				};
+			};
 		};
 
 		aips@50000000 { /* AIPS1 */
@@ -112,7 +178,9 @@
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
-					clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -122,7 +190,9 @@
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
-					clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -132,7 +202,8 @@
 					compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 					reg = <0x5000c000 0x4000>;
 					interrupts = <33>;
-					clocks = <&clks 32>, <&clks 33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+					         <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -143,16 +214,19 @@
 					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
 					reg = <0x50010000 0x4000>;
 					interrupts = <36>;
-					clocks = <&clks 51>, <&clks 52>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
 				ssi2: ssi@50014000 {
-					compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+					compatible = "fsl,imx53-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
 					reg = <0x50014000 0x4000>;
 					interrupts = <30>;
-					clocks = <&clks 49>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
 					dmas = <&sdma 24 1 0>,
 					       <&sdma 25 1 0>;
 					dma-names = "rx", "tx";
@@ -165,7 +239,9 @@
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
-					clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -175,7 +251,9 @@
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
-					clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -184,14 +262,14 @@
 
 			usbphy0: usbphy@0 {
 				compatible = "usb-nop-xceiv";
-				clocks = <&clks 124>;
+				clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
 				clock-names = "main_clk";
 				status = "okay";
 			};
 
 			usbphy1: usbphy@1 {
 				compatible = "usb-nop-xceiv";
-				clocks = <&clks 125>;
+				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
 				clock-names = "main_clk";
 				status = "okay";
 			};
@@ -200,7 +278,7 @@
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80000 0x0200>;
 				interrupts = <18>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,usbphy = <&usbphy0>;
 				status = "disabled";
@@ -210,7 +288,7 @@
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80200 0x0200>;
 				interrupts = <14>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 1>;
 				fsl,usbphy = <&usbphy1>;
 				status = "disabled";
@@ -220,7 +298,7 @@
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80400 0x0200>;
 				interrupts = <16>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
 			};
@@ -229,7 +307,7 @@
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80600 0x0200>;
 				interrupts = <17>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 				fsl,usbmisc = <&usbmisc 3>;
 				status = "disabled";
 			};
@@ -238,7 +316,7 @@
 				#index-cells = <1>;
 				compatible = "fsl,imx53-usbmisc";
 				reg = <0x53f80800 0x200>;
-				clocks = <&clks 108>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 			};
 
 			gpio1: gpio@53f84000 {
@@ -281,18 +359,26 @@
 				#interrupt-cells = <2>;
 			};
 
+			kpp: kpp@53f94000 {
+				compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
+				reg = <0x53f94000 0x4000>;
+				interrupts = <60>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
 			wdog1: wdog@53f98000 {
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f98000 0x4000>;
 				interrupts = <58>;
-				clocks = <&clks 0>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
 			};
 
 			wdog2: wdog@53f9c000 {
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f9c000 0x4000>;
 				interrupts = <59>;
-				clocks = <&clks 0>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
 				status = "disabled";
 			};
 
@@ -300,521 +386,14 @@
 				compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
 				reg = <0x53fa0000 0x4000>;
 				interrupts = <39>;
-				clocks = <&clks 36>, <&clks 41>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+				         <&clks IMX5_CLK_GPT_HF_GATE>;
 				clock-names = "ipg", "per";
 			};
 
 			iomuxc: iomuxc@53fa8000 {
 				compatible = "fsl,imx53-iomuxc";
 				reg = <0x53fa8000 0x4000>;
-
-				audmux {
-					pinctrl_audmux_1: audmuxgrp-1 {
-						fsl,pins = <
-							MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC  0x80000000
-							MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD  0x80000000
-							MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
-							MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD  0x80000000
-						>;
-					};
-
-					pinctrl_audmux_2: audmuxgrp-2 {
-						fsl,pins = <
-							MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
-							MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
-							MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
-							MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
-						>;
-					};
-
-					pinctrl_audmux_3: audmuxgrp-3 {
-						fsl,pins = <
-							MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC	0x80000000
-							MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD	0x80000000
-							MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS	0x80000000
-							MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD	0x80000000
-						>;
-					};
-				};
-
-				fec {
-					pinctrl_fec_1: fecgrp-1 {
-						fsl,pins = <
-							MX53_PAD_FEC_MDC__FEC_MDC	 0x80000000
-							MX53_PAD_FEC_MDIO__FEC_MDIO	 0x80000000
-							MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
-							MX53_PAD_FEC_RX_ER__FEC_RX_ER    0x80000000
-							MX53_PAD_FEC_CRS_DV__FEC_RX_DV   0x80000000
-							MX53_PAD_FEC_RXD1__FEC_RDATA_1   0x80000000
-							MX53_PAD_FEC_RXD0__FEC_RDATA_0   0x80000000
-							MX53_PAD_FEC_TX_EN__FEC_TX_EN    0x80000000
-							MX53_PAD_FEC_TXD1__FEC_TDATA_1   0x80000000
-							MX53_PAD_FEC_TXD0__FEC_TDATA_0   0x80000000
-						>;
-					};
-
-					pinctrl_fec_2: fecgrp-2 {
-						fsl,pins = <
-							MX53_PAD_FEC_MDC__FEC_MDC	 0x80000000
-							MX53_PAD_FEC_MDIO__FEC_MDIO	 0x80000000
-							MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
-							MX53_PAD_FEC_RX_ER__FEC_RX_ER    0x80000000
-							MX53_PAD_FEC_CRS_DV__FEC_RX_DV   0x80000000
-							MX53_PAD_FEC_RXD1__FEC_RDATA_1   0x80000000
-							MX53_PAD_FEC_RXD0__FEC_RDATA_0   0x80000000
-							MX53_PAD_FEC_TX_EN__FEC_TX_EN    0x80000000
-							MX53_PAD_FEC_TXD1__FEC_TDATA_1   0x80000000
-							MX53_PAD_FEC_TXD0__FEC_TDATA_0   0x80000000
-							MX53_PAD_KEY_ROW1__FEC_COL	 0x80000000
-							MX53_PAD_KEY_COL3__FEC_CRS	 0x80000000
-							MX53_PAD_KEY_COL2__FEC_RDATA_2	 0x80000000
-							MX53_PAD_KEY_COL0__FEC_RDATA_3	 0x80000000
-							MX53_PAD_KEY_COL1__FEC_RX_CLK	 0x80000000
-							MX53_PAD_KEY_ROW2__FEC_TDATA_2	 0x80000000
-							MX53_PAD_GPIO_19__FEC_TDATA_3	 0x80000000
-							MX53_PAD_KEY_ROW0__FEC_TX_ER	 0x80000000
-						>;
-					};
-				};
-
-				csi {
-					pinctrl_csi_1: csigrp-1 {
-						fsl,pins = <
-							MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1d5
-							MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC     0x1d5
-							MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC      0x1d5
-							MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK   0x1d5
-							MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19      0x1d5
-							MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18      0x1d5
-							MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17      0x1d5
-							MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16      0x1d5
-							MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15      0x1d5
-							MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14      0x1d5
-							MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13      0x1d5
-							MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12      0x1d5
-							MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11      0x1d5
-							MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10      0x1d5
-							MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9	0x1d5
-							MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8	0x1d5
-							MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7	0x1d5
-							MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6	0x1d5
-							MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5	0x1d5
-							MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4	0x1d5
-							MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK   0x1d5
-						>;
-					};
-
-					pinctrl_csi_2: csigrp-2 {
-						fsl,pins = <
-							MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC	0x1d5
-							MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC	0x1d5
-							MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK	0x1d5
-							MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19	0x1d5
-							MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18	0x1d5
-							MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17	0x1d5
-							MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16	0x1d5
-							MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15	0x1d5
-							MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14	0x1d5
-							MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13	0x1d5
-							MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12	0x1d5
-						>;
-					};
-				};
-
-				cspi {
-					pinctrl_cspi_1: cspigrp-1 {
-						fsl,pins = <
-							MX53_PAD_SD1_DATA0__CSPI_MISO 0x1d5
-							MX53_PAD_SD1_CMD__CSPI_MOSI   0x1d5
-							MX53_PAD_SD1_CLK__CSPI_SCLK   0x1d5
-						>;
-					};
-
-					pinctrl_cspi_2: cspigrp-2 {
-						fsl,pins = <
-							MX53_PAD_EIM_D22__CSPI_MISO 0x1d5
-							MX53_PAD_EIM_D28__CSPI_MOSI 0x1d5
-							MX53_PAD_EIM_D21__CSPI_SCLK 0x1d5
-						>;
-					};
-				};
-
-				ecspi1 {
-					pinctrl_ecspi1_1: ecspi1grp-1 {
-						fsl,pins = <
-							MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
-							MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
-							MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
-						>;
-					};
-
-					pinctrl_ecspi1_2: ecspi1grp-2 {
-						fsl,pins = <
-							MX53_PAD_GPIO_19__ECSPI1_RDY	0x80000000
-							MX53_PAD_EIM_EB2__ECSPI1_SS0	0x80000000
-							MX53_PAD_EIM_D16__ECSPI1_SCLK	0x80000000
-							MX53_PAD_EIM_D17__ECSPI1_MISO	0x80000000
-							MX53_PAD_EIM_D18__ECSPI1_MOSI	0x80000000
-							MX53_PAD_EIM_D19__ECSPI1_SS1	0x80000000
-						>;
-					};
-				};
-
-				ecspi2 {
-					pinctrl_ecspi2_1: ecspi2grp-1 {
-						fsl,pins = <
-							MX53_PAD_EIM_OE__ECSPI2_MISO  0x80000000
-							MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x80000000
-							MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x80000000
-						>;
-					};
-				};
-
-				esdhc1 {
-					pinctrl_esdhc1_1: esdhc1grp-1 {
-						fsl,pins = <
-							MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
-							MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
-							MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
-							MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
-							MX53_PAD_SD1_CMD__ESDHC1_CMD	0x1d5
-							MX53_PAD_SD1_CLK__ESDHC1_CLK	0x1d5
-						>;
-					};
-
-					pinctrl_esdhc1_2: esdhc1grp-2 {
-						fsl,pins = <
-							MX53_PAD_SD1_DATA0__ESDHC1_DAT0   0x1d5
-							MX53_PAD_SD1_DATA1__ESDHC1_DAT1   0x1d5
-							MX53_PAD_SD1_DATA2__ESDHC1_DAT2   0x1d5
-							MX53_PAD_SD1_DATA3__ESDHC1_DAT3   0x1d5
-							MX53_PAD_PATA_DATA8__ESDHC1_DAT4  0x1d5
-							MX53_PAD_PATA_DATA9__ESDHC1_DAT5  0x1d5
-							MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5
-							MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5
-							MX53_PAD_SD1_CMD__ESDHC1_CMD	  0x1d5
-							MX53_PAD_SD1_CLK__ESDHC1_CLK	  0x1d5
-						>;
-					};
-				};
-
-				esdhc2 {
-					pinctrl_esdhc2_1: esdhc2grp-1 {
-						fsl,pins = <
-							MX53_PAD_SD2_CMD__ESDHC2_CMD	0x1d5
-							MX53_PAD_SD2_CLK__ESDHC2_CLK	0x1d5
-							MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
-							MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
-							MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
-							MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
-						>;
-					};
-				};
-
-				esdhc3 {
-					pinctrl_esdhc3_1: esdhc3grp-1 {
-						fsl,pins = <
-							MX53_PAD_PATA_DATA8__ESDHC3_DAT0  0x1d5
-							MX53_PAD_PATA_DATA9__ESDHC3_DAT1  0x1d5
-							MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
-							MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
-							MX53_PAD_PATA_DATA0__ESDHC3_DAT4  0x1d5
-							MX53_PAD_PATA_DATA1__ESDHC3_DAT5  0x1d5
-							MX53_PAD_PATA_DATA2__ESDHC3_DAT6  0x1d5
-							MX53_PAD_PATA_DATA3__ESDHC3_DAT7  0x1d5
-							MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
-							MX53_PAD_PATA_IORDY__ESDHC3_CLK   0x1d5
-						>;
-					};
-				};
-
-				can1 {
-					pinctrl_can1_1: can1grp-1 {
-						fsl,pins = <
-							MX53_PAD_PATA_INTRQ__CAN1_TXCAN 0x80000000
-							MX53_PAD_PATA_DIOR__CAN1_RXCAN  0x80000000
-						>;
-					};
-
-					pinctrl_can1_2: can1grp-2 {
-						fsl,pins = <
-							MX53_PAD_KEY_COL2__CAN1_TXCAN 0x80000000
-							MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000
-						>;
-					};
-
-					pinctrl_can1_3: can1grp-3 {
-						fsl,pins = <
-							MX53_PAD_GPIO_7__CAN1_TXCAN	0x80000000
-							MX53_PAD_GPIO_8__CAN1_RXCAN	0x80000000
-						>;
-					};
-				};
-
-				can2 {
-					pinctrl_can2_1: can2grp-1 {
-						fsl,pins = <
-							MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
-							MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
-						>;
-					};
-				};
-
-				i2c1 {
-					pinctrl_i2c1_1: i2c1grp-1 {
-						fsl,pins = <
-							MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
-							MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
-						>;
-					};
-
-					pinctrl_i2c1_2: i2c1grp-2 {
-						fsl,pins = <
-							MX53_PAD_EIM_D21__I2C1_SCL	0xc0000000
-							MX53_PAD_EIM_D28__I2C1_SDA	0xc0000000
-						>;
-					};
-				};
-
-				i2c2 {
-					pinctrl_i2c2_1: i2c2grp-1 {
-						fsl,pins = <
-							MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
-							MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
-						>;
-					};
-
-					pinctrl_i2c2_2: i2c2grp-2 {
-						fsl,pins = <
-							MX53_PAD_EIM_D16__I2C2_SDA	0xc0000000
-							MX53_PAD_EIM_EB2__I2C2_SCL	0xc0000000
-						>;
-					};
-				};
-
-				i2c3 {
-					pinctrl_i2c3_1: i2c3grp-1 {
-						fsl,pins = <
-							MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
-							MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
-						>;
-					};
-				};
-
-				ipu_disp0 {
-					pinctrl_ipu_disp0_1: ipudisp0grp-1 {
-						fsl,pins = <
-						MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
-						MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
-						MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
-						MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 		0x5
-						MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
-						MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
-						MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
-						MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
-						MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
-						MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
-						MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
-						MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
-						MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
-						MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
-						MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
-						MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
-						MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
-						MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
-						MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
-						MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
-						MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
-						MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
-						MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
-						MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
-						MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
-						MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
-						MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
-						MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
-						>;
-					};
-				};
-
-				ipu_disp1 {
-					pinctrl_ipu_disp1_1: ipudisp1grp-1 {
-						fsl,pins = <
-							MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
-							MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
-							MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
-							MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
-							MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
-							MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
-							MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
-							MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
-							MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
-							MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
-							MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
-							MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
-							MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
-							MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
-							MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
-							MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
-							MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
-							MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
-							MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
-							MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
-							MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
-							MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
-							MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
-							MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
-							MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
-							MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
-							MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
-							MX53_PAD_EIM_DA15__IPU_DI1_PIN1		0x5
-							MX53_PAD_EIM_DA11__IPU_DI1_PIN2		0x5
-							MX53_PAD_EIM_DA12__IPU_DI1_PIN3		0x5
-							MX53_PAD_EIM_A25__IPU_DI1_PIN12		0x5
-							MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
-						>;
-					};
-				};
-
-				ipu_disp2 {
-					pinctrl_ipu_disp2_1: ipudisp2grp-1 {
-						fsl,pins = <
-							MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
-							MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
-							MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
-							MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
-							MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
-							MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0	0x80000000
-							MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1	0x80000000
-							MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2	0x80000000
-							MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3	0x80000000
-							MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK	0x80000000
-						>;
-					};
-				};
-
-				nand {
-					pinctrl_nand_1: nandgrp-1 {
-						fsl,pins = <
-							MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-							MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-							MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-							MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-							MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-							MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-							MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-							MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
-							MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
-							MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
-							MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
-							MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
-							MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
-							MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
-							MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
-						>;
-					};
-				};
-
-				owire {
-					pinctrl_owire_1: owiregrp-1 {
-						fsl,pins = <
-							MX53_PAD_GPIO_18__OWIRE_LINE 0x80000000
-						>;
-					};
-				};
-
-				pwm1 {
-					pinctrl_pwm1_1: pwm1grp-1 {
-						fsl,pins = <
-							MX53_PAD_DISP0_DAT8__PWM1_PWMO	0x5
-						>;
-					};
-				};
-
-				pwm2 {
-					pinctrl_pwm2_1: pwm2grp-1 {
-						fsl,pins = <
-							MX53_PAD_GPIO_1__PWM2_PWMO	0x80000000
-						>;
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1_1: uart1grp-1 {
-						fsl,pins = <
-							MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
-							MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
-						>;
-					};
-
-					pinctrl_uart1_2: uart1grp-2 {
-						fsl,pins = <
-							MX53_PAD_PATA_DIOW__UART1_TXD_MUX  0x1e4
-							MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
-						>;
-					};
-
-					pinctrl_uart1_3: uart1grp-3 {
-						fsl,pins = <
-							MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5
-							MX53_PAD_PATA_IORDY__UART1_RTS	 0x1c5
-						>;
-					};
-				};
-
-				uart2 {
-					pinctrl_uart2_1: uart2grp-1 {
-						fsl,pins = <
-							MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
-							MX53_PAD_PATA_DMARQ__UART2_TXD_MUX     0x1e4
-						>;
-					};
-
-					pinctrl_uart2_2: uart2grp-2 {
-						fsl,pins = <
-							MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1c5
-							MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1c5
-							MX53_PAD_PATA_DIOR__UART2_RTS		0x1c5
-							MX53_PAD_PATA_INTRQ__UART2_CTS		0x1c5
-						>;
-					};
-				};
-
-				uart3 {
-					pinctrl_uart3_1: uart3grp-1 {
-						fsl,pins = <
-							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
-							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
-							MX53_PAD_PATA_DA_1__UART3_CTS	  0x1e4
-							MX53_PAD_PATA_DA_2__UART3_RTS	  0x1e4
-						>;
-					};
-
-					pinctrl_uart3_2: uart3grp-2 {
-						fsl,pins = <
-							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
-							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
-						>;
-					};
-
-				};
-
-				uart4 {
-					pinctrl_uart4_1: uart4grp-1 {
-						fsl,pins = <
-							MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
-							MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
-						>;
-					};
-				};
-
-				uart5 {
-					pinctrl_uart5_1: uart5grp-1 {
-						fsl,pins = <
-							MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4
-							MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4
-						>;
-					};
-				};
 			};
 
 			gpr: iomuxc-gpr@53fa8000 {
@@ -828,9 +407,12 @@
 				compatible = "fsl,imx53-ldb";
 				reg = <0x53fa8008 0x4>;
 				gpr = <&gpr>;
-				clocks = <&clks 122>, <&clks 120>,
-					 <&clks 115>, <&clks 116>,
-					 <&clks 123>, <&clks 85>;
+				clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+				         <&clks IMX5_CLK_LDB_DI1_SEL>,
+				         <&clks IMX5_CLK_IPU_DI0_SEL>,
+				         <&clks IMX5_CLK_IPU_DI1_SEL>,
+				         <&clks IMX5_CLK_LDB_DI0_GATE>,
+				         <&clks IMX5_CLK_LDB_DI1_GATE>;
 				clock-names = "di0_pll", "di1_pll",
 					      "di0_sel", "di1_sel",
 					      "di0", "di1";
@@ -838,14 +420,24 @@
 
 				lvds-channel@0 {
 					reg = <0>;
-					crtcs = <&ipu 0>;
 					status = "disabled";
+
+					port {
+						lvds0_in: endpoint {
+							remote-endpoint = <&ipu_di0_lvds0>;
+						};
+					};
 				};
 
 				lvds-channel@1 {
 					reg = <1>;
-					crtcs = <&ipu 1>;
 					status = "disabled";
+
+					port {
+						lvds1_in: endpoint {
+							remote-endpoint = <&ipu_di1_lvds1>;
+						};
+					};
 				};
 			};
 
@@ -853,7 +445,8 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb4000 0x4000>;
-				clocks = <&clks 37>, <&clks 38>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+				         <&clks IMX5_CLK_PWM1_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <61>;
 			};
@@ -862,7 +455,8 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb8000 0x4000>;
-				clocks = <&clks 39>, <&clks 40>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+				         <&clks IMX5_CLK_PWM2_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <94>;
 			};
@@ -871,7 +465,8 @@
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <31>;
-				clocks = <&clks 28>, <&clks 29>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+				         <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -880,7 +475,8 @@
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x53fc0000 0x4000>;
 				interrupts = <32>;
-				clocks = <&clks 30>, <&clks 31>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+				         <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -889,7 +485,8 @@
 				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
 				reg = <0x53fc8000 0x4000>;
 				interrupts = <82>;
-				clocks = <&clks 158>, <&clks 157>;
+				clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
+				         <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -898,7 +495,8 @@
 				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
 				reg = <0x53fcc000 0x4000>;
 				interrupts = <83>;
-				clocks = <&clks 87>, <&clks 86>;
+				clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
+				         <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -952,7 +550,7 @@
 				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 				reg = <0x53fec000 0x4000>;
 				interrupts = <64>;
-				clocks = <&clks 88>;
+				clocks = <&clks IMX5_CLK_I2C3_GATE>;
 				status = "disabled";
 			};
 
@@ -960,7 +558,8 @@
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <13>;
-				clocks = <&clks 65>, <&clks 66>;
+				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+				         <&clks IMX5_CLK_UART4_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -977,14 +576,15 @@
 				compatible = "fsl,imx53-iim", "fsl,imx27-iim";
 				reg = <0x63f98000 0x4000>;
 				interrupts = <69>;
-				clocks = <&clks 107>;
+				clocks = <&clks IMX5_CLK_IIM_GATE>;
 			};
 
 			uart5: serial@63f90000 {
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x63f90000 0x4000>;
 				interrupts = <86>;
-				clocks = <&clks 67>, <&clks 68>;
+				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+				         <&clks IMX5_CLK_UART5_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -992,7 +592,7 @@
 			owire: owire@63fa4000 {
 				compatible = "fsl,imx53-owire", "fsl,imx21-owire";
 				reg = <0x63fa4000 0x4000>;
-				clocks = <&clks 159>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
 				status = "disabled";
 			};
 
@@ -1002,7 +602,8 @@
 				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
 				reg = <0x63fac000 0x4000>;
 				interrupts = <37>;
-				clocks = <&clks 53>, <&clks 54>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -1011,7 +612,8 @@
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
-				clocks = <&clks 56>, <&clks 56>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+				         <&clks IMX5_CLK_SDMA_GATE>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
@@ -1023,7 +625,8 @@
 				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
 				reg = <0x63fc0000 0x4000>;
 				interrupts = <38>;
-				clocks = <&clks 55>, <&clks 55>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -1034,7 +637,7 @@
 				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 				reg = <0x63fc4000 0x4000>;
 				interrupts = <63>;
-				clocks = <&clks 35>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
 				status = "disabled";
 			};
 
@@ -1044,15 +647,16 @@
 				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
 				reg = <0x63fc8000 0x4000>;
 				interrupts = <62>;
-				clocks = <&clks 34>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
 				status = "disabled";
 			};
 
 			ssi1: ssi@63fcc000 {
-				compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+						"fsl,imx21-ssi";
 				reg = <0x63fcc000 0x4000>;
 				interrupts = <29>;
-				clocks = <&clks 48>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
 				dmas = <&sdma 28 0 0>,
 				       <&sdma 29 0 0>;
 				dma-names = "rx", "tx";
@@ -1071,15 +675,16 @@
 				compatible = "fsl,imx53-nand";
 				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
 				interrupts = <8>;
-				clocks = <&clks 60>;
+				clocks = <&clks IMX5_CLK_NFC_GATE>;
 				status = "disabled";
 			};
 
 			ssi3: ssi@63fe8000 {
-				compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+						"fsl,imx21-ssi";
 				reg = <0x63fe8000 0x4000>;
 				interrupts = <96>;
-				clocks = <&clks 50>;
+				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
 				dmas = <&sdma 46 0 0>,
 				       <&sdma 47 0 0>;
 				dma-names = "rx", "tx";
@@ -1092,7 +697,9 @@
 				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
 				reg = <0x63fec000 0x4000>;
 				interrupts = <87>;
-				clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
@@ -1101,27 +708,34 @@
 				compatible = "fsl,imx53-tve";
 				reg = <0x63ff0000 0x1000>;
 				interrupts = <92>;
-				clocks = <&clks 69>, <&clks 116>;
+				clocks = <&clks IMX5_CLK_TVE_GATE>,
+				         <&clks IMX5_CLK_IPU_DI1_SEL>;
 				clock-names = "tve", "di_sel";
-				crtcs = <&ipu 1>;
 				status = "disabled";
+
+				port {
+					tve_in: endpoint {
+						remote-endpoint = <&ipu_di1_tve>;
+					};
+				};
 			};
 
 			vpu: vpu@63ff4000 {
 				compatible = "fsl,imx53-vpu";
 				reg = <0x63ff4000 0x1000>;
 				interrupts = <9>;
-				clocks = <&clks 63>, <&clks 63>;
+				clocks = <&clks IMX5_CLK_VPU_GATE>,
+				         <&clks IMX5_CLK_VPU_GATE>;
 				clock-names = "per", "ahb";
+				resets = <&src 1>;
 				iram = <&ocram>;
-				status = "disabled";
 			};
 		};
 
 		ocram: sram@f8000000 {
 			compatible = "mmio-sram";
 			reg = <0xf8000000 0x20000>;
-			clocks = <&clks 186>;
+			clocks = <&clks IMX5_CLK_OCRAM>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
new file mode 100644
index 000000000000..994f96a3fb54
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_V1__
+#define __DTS_V1__
+/dts-v1/;
+#endif
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dfi-fs700-m60.dtsi"
+
+/ {
+	model = "DFI FS700-M60-6DL i.MX6dl Q7 Board";
+	compatible = "dfi,fs700-m60-6dl", "dfi,fs700e-m60", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw51xx.dts b/arch/arm/boot/dts/imx6dl-gw51xx.dts
new file mode 100644
index 000000000000..4bd055f4c930
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite GW51XX";
+	compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw52xx.dts b/arch/arm/boot/dts/imx6dl-gw52xx.dts
new file mode 100644
index 000000000000..c9136058f15e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite GW52XX";
+	compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/imx6dl-gw53xx.dts
new file mode 100644
index 000000000000..61818a14fde6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite GW53XX";
+	compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw54xx.dts b/arch/arm/boot/dts/imx6dl-gw54xx.dts
new file mode 100644
index 000000000000..ab38b6770a06
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite GW54XX";
+	compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index 5bfae54fb780..5373a5f2782b 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -11,6 +11,10 @@
 	model = "SolidRun HummingBoard DL/Solo";
 	compatible = "solidrun,hummingboard", "fsl,imx6dl";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio1 2 1>;
@@ -67,6 +71,13 @@
 	status = "okay";
 };
 
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
@@ -82,6 +93,13 @@
 	 */
 };
 
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
+	status = "okay";
+};
+
 &iomuxc {
 	hummingboard {
 		pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
@@ -97,6 +115,12 @@
 			>;
 		};
 
+		pinctrl_hummingboard_hdmi: hummingboard-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
 		pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
@@ -104,6 +128,13 @@
 			>;
 		};
 
+		pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
 		pinctrl_hummingboard_spdif: hummingboard-spdif {
 			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
 		};
diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
new file mode 100644
index 000000000000..5f4d33ccc4b3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite Nitrogen6x Board";
+	compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
new file mode 100644
index 000000000000..08e97801494e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl-phytec-pfla02.dtsi"
+#include "imx6qdl-phytec-pbab01.dtsi"
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 DualLite/Solo Carrier-Board";
+	compatible = "phytec,imx6dl-pbab01", "phytec,imx6dl-pfla02", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
new file mode 100644
index 000000000000..964bc2ad3c5d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-phytec-pfla02.dtsi"
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 DualLite/Solo";
+	compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h
index b81a7a4ebab6..0ead323fdbd2 100644
--- a/arch/arm/boot/dts/imx6dl-pinfunc.h
+++ b/arch/arm/boot/dts/imx6dl-pinfunc.h
@@ -755,6 +755,7 @@
 #define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x230 0x600 0x878 0x6 0x2
 #define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x230 0x600 0x000 0x7 0x0
 #define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x234 0x604 0x840 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x234 0x604 0x03c 0x11 0xff000609
 #define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x234 0x604 0x87c 0x2 0x2
 #define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x234 0x604 0x000 0x5 0x0
 #define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x234 0x604 0x000 0x6 0x0
@@ -950,6 +951,7 @@
 #define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x2d8 0x6c0 0x000 0x5 0x0
 #define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x2d8 0x6c0 0x000 0x7 0x0
 #define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x2dc 0x6c4 0x928 0x0 0x1
+#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x2dc 0x6c4 0x000 0x2 0x0
 #define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x2dc 0x6c4 0x000 0x3 0x0
 #define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x2dc 0x6c4 0x000 0x5 0x0
 #define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x2e0 0x6c8 0x000 0x0 0x0
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
new file mode 100644
index 000000000000..909fafc0b650
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -0,0 +1,539 @@
+/*
+ * Copyright 2014 Iain Paton <ipaton0@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "RIoTboard i.MX6S";
+	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6-riotboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+			mux-int-port = <1>;
+			mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 31 0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pmic: pf0100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 8>;
+
+		regulators {
+			reg_vddcore: sw1ab {				/* VDDARM_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_vddsoc: sw1c {				/* VDDSOC_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_gen_3v3: sw2 {				/* VDDHIGH_IN */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5a: sw3a {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5b: sw3b {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_vtt: sw4 {				/* MIPI conn */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_5v_600mA: swbst {				/* not used */
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			reg_snvs_3v: vsnvs {				/* VDD_SNVS_IN */
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {				/* VREF_DDR */
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1_1v5: vgen1 {				/* not used */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen2_1v2_eth: vgen2 {			/* pcie ? */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			reg_vgen3_2v8: vgen3 {				/* not used */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			reg_vgen4_1v8: vgen4 {				/* NVCC_SD3 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5_2v5_sgtl: vgen5 {			/* Pwr LED & 5V0_delayed enable */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6_3v3: vgen6 {				/* #V#_DELAYED enable, MIPI */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clocks = <&clks 116>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 0>;
+	wp-gpios = <&gpio1 2 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	wp-gpios = <&gpio7 1 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	imx6-riotboard {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x8000000
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x8000000
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x8000000
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x8000000
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x000b1		/* CS0 */
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x000b1		/* CS1 */
+				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1		/* CS0 */
+				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1		/* CS0 */
+				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x000b1		/* CS1 */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x80000000
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0		/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0		/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x130b0		/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0		/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0		/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0xc0000000	/* GPIO16 -> AR8035 25MHz */
+			        MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x80000000	/* AR8035 interrupt */
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__I2C4_SCL             0x4001b8b1
+				MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x80000000	/* user led0 */
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x80000000	/* user led1 */
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x80000000	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x80000000
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x80000000	/* SD2 CD */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* SD2 WP */
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x80000000	/* SD3 CD */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x80000000	/* SD3 WP */
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x80000000	/* SD4 RST (eMMC) */
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts
new file mode 100644
index 000000000000..2de04479dc35
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite SABRE Lite Board";
+	compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 9e8ae118fdd4..0a9c49d69d41 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -8,6 +8,7 @@
  *
  */
 
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "imx6dl-pinfunc.h"
 #include "imx6qdl.dtsi"
 
@@ -21,6 +22,26 @@
 			device_type = "cpu";
 			reg = <0>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1275000
+				792000  1175000
+				396000  1075000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				996000	1175000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks 104>, <&clks 6>, <&clks 16>,
+				 <&clks 17>, <&clks 170>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
 		cpu@1 {
@@ -45,17 +66,17 @@
 
 			pxp: pxp@020f0000 {
 				reg = <0x020f0000 0x4000>;
-				interrupts = <0 98 0x04>;
+				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			epdc: epdc@020f4000 {
 				reg = <0x020f4000 0x4000>;
-				interrupts = <0 97 0x04>;
+				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			lcdif: lcdif@020f8000 {
 				reg = <0x020f8000 0x4000>;
-				interrupts = <0 39 0x04>;
+				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -63,13 +84,23 @@
 			i2c4: i2c@021f8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx1-i2c";
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021f8000 0x4000>;
-				interrupts = <0 35 0x04>;
+				interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks 116>;
 				status = "disabled";
 			};
 		};
 	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu1_di0>, <&ipu1_di1>;
+	};
+};
+
+&hdmi {
+	compatible = "fsl,imx6dl-hdmi";
 };
 
 &ldb {
@@ -79,12 +110,4 @@
 	clock-names = "di0_pll", "di1_pll",
 		      "di0_sel", "di1_sel",
 		      "di0", "di1";
-
-	lvds-channel@0 {
-		crtcs = <&ipu1 0>, <&ipu1 1>;
-	};
-
-	lvds-channel@1 {
-		crtcs = <&ipu1 0>, <&ipu1 1>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index edf1bd967164..78df05e9d1ce 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -23,14 +23,27 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		reg_usb_otg_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
 	};
 
 	leds {
@@ -46,7 +59,7 @@
 
 &gpmi {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
 	status = "disabled"; /* gpmi nand conflicts with SD */
 };
 
@@ -54,28 +67,131 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	hog {
+	imx6q-arm2 {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
 			>;
 		};
-	};
 
-	arm2 {
-		pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
+				MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_cdwp: usdhc3cdwp {
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
 				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
 			>;
 		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
 	};
 };
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_2>;
+	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
 	status = "okay";
 };
 
@@ -84,8 +200,8 @@
 	wp-gpios = <&gpio6 14 0>;
 	vmmc-supply = <&reg_3p3v>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_1
-		     &pinctrl_usdhc3_arm2>;
+	pinctrl-0 = <&pinctrl_usdhc3
+		     &pinctrl_usdhc3_cdwp>;
 	status = "okay";
 };
 
@@ -93,13 +209,13 @@
 	non-removable;
 	vmmc-supply = <&reg_3p3v>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4_1>;
+	pinctrl-0 = <&pinctrl_usdhc4>;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_2>;
+	pinctrl-0 = <&pinctrl_uart2>;
 	fsl,dte-mode;
 	fsl,uart-has-rtscts;
 	status = "okay";
@@ -107,6 +223,6 @@
 
 &uart4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4_1>;
+	pinctrl-0 = <&pinctrl_uart4>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
new file mode 100644
index 000000000000..99b46f8030ad
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2013 CompuLab Ltd.
+ *
+ * Author: Valentin Raevsky <valentin@compulab.co.il>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "CompuLab CM-FX6";
+	compatible = "compulab,cm-fx6", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat-led {
+			label = "Heartbeat";
+			gpios = <&gpio2 31 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6q-cm-fx6 {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
new file mode 100644
index 000000000000..fd0ad9a8866c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_V1__
+#define __DTS_V1__
+/dts-v1/;
+#endif
+
+#include "imx6q.dtsi"
+#include "imx6qdl-dfi-fs700-m60.dtsi"
+
+/ {
+	model = "DFI FS700-M60-6QD i.MX6qd Q7 Board";
+	compatible = "dfi,fs700-m60-6qd", "dfi,fs700e-m60", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
new file mode 100644
index 000000000000..e0302636aff5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -0,0 +1,432 @@
+/*
+ * Copyright 2013 Data Modul AG
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Data Modul eDM-QMX6 Board";
+	compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		gpio7 = &stmpe_gpio1;
+		gpio8 = &stmpe_gpio2;
+		stmpe-i2c0 = &stmpe1;
+		stmpe-i2c1 = &stmpe2;
+	};
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_switch: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg_switch";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 12 0>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		reg_usb_host1: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_host1_en";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 31 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "blue";
+			gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-pink {
+			label = "pink";
+			gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-red {
+			label = "red";
+			gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ecspi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio1 12 0>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "m25p80";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 0>;
+	phy-supply = <&vgen2_1v2_eth>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2
+		     &pinctrl_stmpe1
+		     &pinctrl_stmpe2
+		     &pinctrl_pfuze>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_1v2_eth: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vdd_high_in: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	stmpe1: stmpe1601@40 {
+		compatible = "st,stmpe1601";
+		reg = <0x40>;
+		interrupts = <30 0>;
+		interrupt-parent = <&gpio3>;
+		vcc-supply = <&sw2_reg>;
+		vio-supply = <&sw2_reg>;
+
+		stmpe_gpio1: stmpe_gpio {
+			#gpio-cells = <2>;
+			compatible = "st,stmpe-gpio";
+		};
+	};
+
+	stmpe2: stmpe1601@44 {
+		compatible = "st,stmpe1601";
+		reg = <0x44>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpio5>;
+		vcc-supply = <&sw2_reg>;
+		vio-supply = <&sw2_reg>;
+
+		stmpe_gpio2: stmpe_gpio {
+			#gpio-cells = <2>;
+			compatible = "st,stmpe-gpio";
+		};
+	};
+
+	temp1: ad7414@4c {
+		compatible = "ad,ad7414";
+		reg = <0x4c>;
+	};
+
+	temp2: ad7414@4d {
+		compatible = "ad,ad7414";
+		reg = <0x4d>;
+	};
+
+	rtc: m41t62@68 {
+		compatible = "stm,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-dmo-edmqmx6 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
+				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
+			>;
+		};
+
+		pinctrl_ecspi5: ecspi5rp-1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x80000000
+				MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x80000000
+				MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x80000000
+				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x80000000
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pfuze: pfuze100grp1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x80000000
+			>;
+		};
+
+		pinctrl_stmpe1: stmpe1grp {
+			fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
+		};
+
+		pinctrl_stmpe2: stmpe2grp {
+			fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host1>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
new file mode 100644
index 000000000000..703539cf36d3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2013 Philipp Zabel
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "Zealz GK802";
+	compatible = "zealz,imx6q-gk802", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		recovery-button {
+			label = "recovery";
+			gpios = <&gpio3 16 1>;
+			linux,code = <0x198>; /* KEY_RESTART */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+/* Internal I2C */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* SDMC DM2016 1024 bit EEPROM + 128 bit OTP */
+	eeprom: dm2016@51 {
+		compatible = "sdmc,dm2016";
+		reg = <0x51>;
+	};
+};
+
+/* External I2C via HDMI */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-gk802 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* Recovery button, active-low */
+				MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x100b1
+				/* RTL8192CU enable GPIO, active-low */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* External USB-A port (USBOTG) */
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Internal USB port (USBH1), connected to RTL8192CU */
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* External microSD */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 11 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* Internal microSD */
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts
new file mode 100644
index 000000000000..af4929aee075
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Quad GW51XX";
+	compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw52xx.dts b/arch/arm/boot/dts/imx6q-gw52xx.dts
new file mode 100644
index 000000000000..5f71ddbc7f05
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Quad GW52XX";
+	compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw53xx.dts b/arch/arm/boot/dts/imx6q-gw53xx.dts
new file mode 100644
index 000000000000..360c316b4740
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Quad GW53XX";
+	compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
new file mode 100644
index 000000000000..3689eaa58826
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -0,0 +1,548 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "Gateworks Ventana GW5400-A";
+	compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
+
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eth1;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		sky2 = &eth1;
+		ssi0 = &ssi1;
+		spi0 = &ecspi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+		usdhc2 = &usdhc3;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio1 5 0>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "sst,w25q256";
+		spi-max-frequency = <30000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pciswitch: pex8609@3f {
+		compatible = "plx,pex8609";
+		reg = <0x3f>;
+	};
+
+	pciclkgen: si52147@6b {
+		compatible = "sil,si52147";
+		reg = <0x6b>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&sw4_reg>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	hdmiin: adv7611@4c {
+		compatible = "adi,adv7611";
+		reg = <0x4c>;
+	};
+
+	touchscreen: egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>; /* gpio7_12 active low */
+		wakeup-gpios = <&gpio7 12 0>;
+	};
+
+	videoout: adv7393@2a {
+		compatible = "adi,adv7393";
+		reg = <0x2a>;
+	};
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-gw5400-a {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05     0x80000000 /* GPS_PPS */
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* TOUCH_IRQ# */
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10   0x80000000 /* user2 led */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
+				MX6QDL_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
+			 >;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 0>;
+	status = "okay";
+
+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
+		compatible = "marvell,sky2";
+	};
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts
new file mode 100644
index 000000000000..ab518d66a75e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Quad GW54XX";
+	compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
new file mode 100644
index 000000000000..a57866b2e97e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Nitrogen6x Board";
+	compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
index 7d37ec60d58d..c139ac0ebe15 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
+++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
@@ -11,24 +11,17 @@
 
 /dts-v1/;
 #include "imx6q-phytec-pfla02.dtsi"
+#include "imx6qdl-phytec-pbab01.dtsi"
 
 / {
 	model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board";
 	compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q";
-};
-
-&fec {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
 
-&usdhc2 {
-	status = "okay";
+	chosen {
+		stdout-path = &uart4;
+	};
 };
 
-&usdhc3 {
-	status = "okay";
+&sata {
+        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
index 1a3b50d4d8fa..cd20d0a948de 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
@@ -10,171 +10,13 @@
  */
 
 #include "imx6q.dtsi"
+#include "imx6qdl-phytec-pfla02.dtsi"
 
 / {
-	model = "Phytec phyFLEX-i.MX6 Ouad";
+	model = "Phytec phyFLEX-i.MX6 Quad";
 	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
 
 	memory {
 		reg = <0x10000000 0x80000000>;
 	};
 };
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3_1>;
-	status = "okay";
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 24 0>;
-
-	flash@0 {
-		compatible = "m25p80";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c32";
-		reg = <0x50>;
-	};
-
-	pmic@58 {
-		compatible = "dialog,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <17 0x8>; /* active-low GPIO4_17 */
-
-		regulators {
-			vddcore_reg: bcore1 {
-				regulator-min-microvolt = <730000>;
-				regulator-max-microvolt = <1380000>;
-				regulator-always-on;
-			};
-
-			vddsoc_reg: bcore2 {
-				regulator-min-microvolt = <730000>;
-				regulator-max-microvolt = <1380000>;
-				regulator-always-on;
-			};
-
-			vdd_ddr3_reg: bpro {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_reg: bperi {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_buckmem_reg: bmem {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_eth_reg: bio {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vdd_eth_io_reg: ldo4 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vdd_mx6_snvs_reg: ldo5 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_pmic_io_reg: ldo6 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_sd0_reg: ldo9 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_sd1_reg: ldo10 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_mx6_high_reg: ldo11 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
-				MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000 /* PMIC interrupt */
-			>;
-		};
-	};
-
-	pfla02 {
-		pinctrl_usdhc3_pfla02: usdhc3grp-pfla02 {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
-			>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_3>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 0>;
-	status = "disabled";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4_1>;
-	status = "disabled";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2_2>;
-	cd-gpios = <&gpio1 4 0>;
-	wp-gpios = <&gpio1 2 0>;
-	status = "disabled";
-};
-
-&usdhc3 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_usdhc3_2
-		     &pinctrl_usdhc3_pfla02>;
-        cd-gpios = <&gpio1 27 0>;
-        wp-gpios = <&gpio1 29 0>;
-        status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h
index 97ed0816a6e0..9fc6120a1853 100644
--- a/arch/arm/boot/dts/imx6q-pinfunc.h
+++ b/arch/arm/boot/dts/imx6q-pinfunc.h
@@ -673,6 +673,7 @@
 #define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x22c 0x5fc 0x948 0x6 0x1
 #define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x22c 0x5fc 0x900 0x7 0x1
 #define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x230 0x600 0x870 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x230 0x600 0x03c 0x11 0xff000609
 #define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x230 0x600 0x8ac 0x2 0x1
 #define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x230 0x600 0x000 0x5 0x0
 #define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x230 0x600 0x000 0x6 0x0
@@ -1024,6 +1025,7 @@
 #define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x34c 0x734 0x000 0x6 0x0
 #define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x350 0x738 0x000 0x0 0x0
 #define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK             0x350 0x738 0x828 0x1 0x0
+#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x350 0x738 0x000 0x2 0x0
 #define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x350 0x738 0x000 0x3 0x0
 #define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x350 0x738 0x000 0x5 0x0
 #define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x354 0x73c 0x000 0x0 0x0
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index f004913f7d80..96e4688be77c 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -12,189 +12,13 @@
 
 /dts-v1/;
 #include "imx6q.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
 
 / {
 	model = "Freescale i.MX6 Quad SABRE Lite Board";
 	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_2p5v: 2p5v {
-			compatible = "regulator-fixed";
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: usb_otg_vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
-};
-
-&ecspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio3 19 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 0>;
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
-				MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x80000000
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23	0x80000000
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
 };
 
 &sata {
 	status = "okay";
 };
-
-&ssi1 {
-	fsl,mode = "i2s-slave";
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_2>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4_2>;
-	cd-gpios = <&gpio2 6 0>;
-	wp-gpios = <&gpio2 7 0>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts
index ee6addf149af..86cf09364664 100644
--- a/arch/arm/boot/dts/imx6q-sbc6x.dts
+++ b/arch/arm/boot/dts/imx6q-sbc6x.dts
@@ -17,28 +17,78 @@
 	};
 };
 
+
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
+	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	status = "okay";
 };
 
+&iomuxc {
+	imx6q-sbc6x {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &usbotg {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
+	pinctrl-0 = <&pinctrl_usbotg>;
 	disable-over-current;
 	status = "okay";
 };
 
 &usdhc3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	pinctrl-0 = <&pinctrl_usdhc3>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
index 6e1ccdc019a7..6c561060bf5c 100644
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@@ -16,24 +16,97 @@
 	model = "Udoo i.MX6 Quad Board";
 	compatible = "udoo,imx6q-udoo", "fsl,imx6q";
 
+	chosen {
+		stdout-path = &uart2;
+	};
+
 	memory {
 		reg = <0x10000000 0x40000000>;
 	};
 };
 
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6q-udoo {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
 &sata {
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
+	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
 &usdhc3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	pinctrl-0 = <&pinctrl_usdhc3>;
 	non-removable;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index f024ef28b34b..addd3f881ce2 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -8,10 +8,15 @@
  *
  */
 
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "imx6q-pinfunc.h"
 #include "imx6qdl.dtsi"
 
 / {
+	aliases {
+		spi4 = &ecspi5;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -25,8 +30,17 @@
 				/* kHz    uV */
 				1200000 1275000
 				996000  1250000
+				852000  1250000
 				792000  1150000
-				396000  950000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clks 104>, <&clks 6>, <&clks 16>,
@@ -74,7 +88,7 @@
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02018000 0x4000>;
-					interrupts = <0 35 0x04>;
+					interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 116>, <&clks 116>;
 					clock-names = "ipg", "per";
 					status = "disabled";
@@ -125,20 +139,92 @@
 		sata: sata@02200000 {
 			compatible = "fsl,imx6q-ahci";
 			reg = <0x02200000 0x4000>;
-			interrupts = <0 39 0x04>;
+			interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
 			clocks =  <&clks 154>, <&clks 187>, <&clks 105>;
 			clock-names = "sata", "sata_ref", "ahb";
 			status = "disabled";
 		};
 
 		ipu2: ipu@02800000 {
-			#crtc-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,imx6q-ipu";
 			reg = <0x02800000 0x400000>;
-			interrupts = <0 8 0x4 0 7 0x4>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks 133>, <&clks 134>, <&clks 137>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 4>;
+
+			ipu2_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu2_di0_disp0: endpoint@0 {
+				};
+
+				ipu2_di0_hdmi: endpoint@1 {
+					remote-endpoint = <&hdmi_mux_2>;
+				};
+
+				ipu2_di0_mipi: endpoint@2 {
+				};
+
+				ipu2_di0_lvds0: endpoint@3 {
+					remote-endpoint = <&lvds0_mux_2>;
+				};
+
+				ipu2_di0_lvds1: endpoint@4 {
+					remote-endpoint = <&lvds1_mux_2>;
+				};
+			};
+
+			ipu2_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu2_di1_hdmi: endpoint@1 {
+					remote-endpoint = <&hdmi_mux_3>;
+				};
+
+				ipu2_di1_mipi: endpoint@2 {
+				};
+
+				ipu2_di1_lvds0: endpoint@3 {
+					remote-endpoint = <&lvds0_mux_3>;
+				};
+
+				ipu2_di1_lvds1: endpoint@4 {
+					remote-endpoint = <&lvds1_mux_3>;
+				};
+			};
+		};
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
+	};
+};
+
+&hdmi {
+	compatible = "fsl,imx6q-hdmi";
+
+	port@2 {
+		reg = <2>;
+
+		hdmi_mux_2: endpoint {
+			remote-endpoint = <&ipu2_di0_hdmi>;
+		};
+	};
+
+	port@3 {
+		reg = <3>;
+
+		hdmi_mux_3: endpoint {
+			remote-endpoint = <&ipu2_di1_hdmi>;
 		};
 	};
 };
@@ -152,10 +238,56 @@
 		      "di0", "di1";
 
 	lvds-channel@0 {
-		crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
+		port@2 {
+			reg = <2>;
+
+			lvds0_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_lvds0>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			lvds0_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_lvds0>;
+			};
+		};
 	};
 
 	lvds-channel@1 {
-		crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
+		port@2 {
+			reg = <2>;
+
+			lvds1_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_lvds1>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			lvds1_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_lvds1>;
+			};
+		};
+	};
+};
+
+&mipi_dsi {
+	port@2 {
+		reg = <2>;
+
+		mipi_mux_2: endpoint {
+			remote-endpoint = <&ipu2_di0_mipi>;
+		};
+	};
+
+	port@3 {
+		reg = <3>;
+
+		mipi_mux_3: endpoint {
+			remote-endpoint = <&ipu2_di1_mipi>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index c2a24888a276..25da82a03110 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -55,6 +55,20 @@
 	};
 };
 
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
+	status = "okay";
+};
+
 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
@@ -69,6 +83,19 @@
 
 &iomuxc {
 	cubox_i {
+		pinctrl_cubox_i_hdmi: cubox-i-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
+		pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
 		pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
new file mode 100644
index 000000000000..2c253d6d20bd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -0,0 +1,199 @@
+/ {
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dummy_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "dummy-supply";
+		};
+
+		reg_usb_otg_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&ecspi3 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf040b", "m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	status = "okay";
+	phy-mode = "rgmii";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-dfi-fs700-m60 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
+				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
+				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+			>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 { /* module slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio2 2 0>;
+	status = "okay";
+};
+
+&usdhc3 { /* baseboard slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+};
+
+&usdhc4 { /* eMMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
new file mode 100644
index 000000000000..31665adcbf39
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -0,0 +1,379 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		can0 = &can1;
+		ethernet0 = &fec;
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio1 26 0>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_5p0v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "5P0V";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: ltc3676@3c {
+		compatible = "ltc,ltc3676";
+		reg = <0x3c>;
+
+		regulators {
+			sw1_reg: ltc3676__sw1 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: ltc3676__sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: ltc3676__sw3 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: ltc3676__sw4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ltc3676__ldo2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ltc3676__ldo4 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-gw51xx {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x80000000 /* MEZZ_DIO0 */
+				MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x80000000 /* MEZZ_DIO1 */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x80000000 /* OTG_PWR_EN */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00    0x80000000 /* PCIE_RST# */
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x80000000 /* user1 led */
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x80000000 /* user2 led */
+			 >;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 0 0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
new file mode 100644
index 000000000000..367af3ec9435
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -0,0 +1,532 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		ethernet0 = &fec;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+		usdhc2 = &usdhc3;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio1 26 0>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		/* remove this fixed regulator once ltc3676__sw2 driver available */
+		reg_1p8v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_5p0v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "5P0V";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pciswitch: pex8609@3f {
+		compatible = "plx,pex8609";
+		reg = <0x3f>;
+	};
+
+	pmic: ltc3676@3c {
+		compatible = "ltc,ltc3676";
+		reg = <0x3c>;
+
+		regulators {
+			sw1_reg: ltc3676__sw1 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: ltc3676__sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: ltc3676__sw3 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: ltc3676__sw4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ltc3676__ldo2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ltc3676__ldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ltc3676__ldo4 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accelerometer: fxos8700@1e {
+		compatible = "fsl,fxos8700";
+		reg = <0x13>;
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 169>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>; /* gpio7_12 active low */
+		wakeup-gpios = <&gpio7 12 0>;
+	};
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-gw52xx {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x80000000 /* MEZZ_DIO0 */
+				MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x80000000 /* MEZZ_DIO1 */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x80000000 /* OTG_PWR_EN */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31   0x80000000 /* VIDDEC_PDN# */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1     0x000130b0 /* AUD4_MCK */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02    0x80000000 /* USB_SEL_PCI */
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12   0x80000000 /* TOUCH_IRQ# */
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x80000000 /* user1 led */
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x80000000 /* user2 led */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x80000000 /* user3 led */
+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11   0x80000000 /* LVDS_TCH# */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00  0x80000000 /* SD3_CD# */
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11  0x80000000 /* UART2_EN# */
+			 >;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 0>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
new file mode 100644
index 000000000000..c91b5a6c769b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -0,0 +1,577 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		can0 = &can1;
+		ethernet0 = &fec;
+		ethernet1 = &eth1;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		sky2 = &eth1;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+		usdhc2 = &usdhc3;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio1 26 0>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		/* remove when pmic 1p8 regulator available */
+		reg_1p8v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pciclkgen: si53156@6b {
+		compatible = "sil,si53156";
+		reg = <0x6b>;
+	};
+
+	pciswitch: pex8606@3f {
+		compatible = "plx,pex8606";
+		reg = <0x3f>;
+	};
+
+	pmic: ltc3676@3c {
+		compatible = "ltc,ltc3676";
+		reg = <0x3c>;
+
+		regulators {
+			/* VDD_SOC */
+			sw1_reg: ltc3676__sw1 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 */
+			sw2_reg: ltc3676__sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM */
+			sw3_reg: ltc3676__sw3 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR */
+			sw4_reg: ltc3676__sw4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 */
+			ldo2_reg: ltc3676__ldo2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 */
+			ldo3_reg: ltc3676__ldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH */
+			ldo4_reg: ltc3676__ldo4 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accelerometer: fxos8700@1e {
+		compatible = "fsl,fxos8700";
+		reg = <0x1e>;
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	hdmiin: adv7611@4c {
+		compatible = "adi,adv7611";
+		reg = <0x4c>;
+	};
+
+	touchscreen: egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 2>; /* gpio1_11 active low */
+		wakeup-gpios = <&gpio1 11 0>;
+	};
+
+	videoout: adv7393@2a {
+		compatible = "adi,adv7393";
+		reg = <0x2a>;
+	};
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-gw53xx {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A19__GPIO2_IO19    0x80000000 /* PCIE6EXP_DIO0 */
+				MX6QDL_PAD_EIM_A20__GPIO2_IO18    0x80000000 /* PCIE6EXP_DIO1 */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27  0x80000000 /* GPS_SHDN */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26  0x80000000 /* GPS_PPS */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02     0x80000000 /* CAN_STBY */
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08     0x80000000 /* PMIC_IRQ# */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09     0x80000000 /* HUB_RST# */
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* PCIE_WDIS# */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05    0x80000000 /* ACCEL_IRQ# */
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14   0x80000000 /* USBOTG_OC# */
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x80000000 /* user2 led */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11    0x80000000 /* TOUCH_IRQ# */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00   0x80000000 /* SD3_DET# */
+			 >;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x80000000
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x80000000
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 0>;
+	status = "okay";
+
+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
+		compatible = "marvell,sky2";
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
new file mode 100644
index 000000000000..698d3063b295
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -0,0 +1,604 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		can0 = &can1;
+		ethernet0 = &fec;
+		ethernet1 = &eth1;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		sky2 = &eth1;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+		usdhc2 = &usdhc3;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio1 26 0>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pciswitch: pex8609@3f {
+		compatible = "plx,pex8609";
+		reg = <0x3f>;
+	};
+
+	pciclkgen: si52147@6b {
+		compatible = "sil,si52147";
+		reg = <0x6b>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accelerometer: fxos8700@1e {
+		compatible = "fsl,fxos8700";
+		reg = <0x1e>;
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&sw4_reg>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	hdmiin: adv7611@4c {
+		compatible = "adi,adv7611";
+		reg = <0x4c>;
+	};
+
+	touchscreen: egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>; /* gpio7_12 active low */
+		wakeup-gpios = <&gpio7 12 0>;
+	};
+
+	videoout: adv7393@2a {
+		compatible = "adi,adv7393";
+		reg = <0x2a>;
+	};
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-gw54xx {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26  0x80000000 /* GPS_PPS */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02     0x80000000 /* CAN_STBY */
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* TOUCH_IRQ# */
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x80000000 /* user2 led */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
+				MX6QDL_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
+			 >;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x80000000
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x80000000
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 0>;
+	status = "okay";
+
+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
+		compatible = "marvell,sky2";
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
index a3cb2fff8f61..d16066608e21 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
@@ -26,25 +26,25 @@
 				/* GPIO16 -> AR8035 25MHz */
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0xc0000000
 				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x80000000
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
 				/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
 				/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
 				/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x130b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
 				/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
 				/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
 				/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
 
 				/*
 				 * As the RMII pins are also connected to RGMII
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
new file mode 100644
index 000000000000..4c4b17596c8b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -0,0 +1,426 @@
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6x-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "sst,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-nitrogen6x {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				/* Menu Button */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				/* Home Button */
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				/* Back Button */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* Volume Up Button */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Volume Down Button */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio2 6 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
new file mode 100644
index 000000000000..584721264121
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	chosen {
+		linux,stdout-path = &uart4;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	tlv320@18 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x18>;
+	};
+
+	stmpe@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,rtc8564";
+		reg = <0x51>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
new file mode 100644
index 000000000000..faa3494a69d4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -0,0 +1,356 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 Ouad";
+	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 15 0>;
+		};
+
+		reg_usb_h1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 0 0>;
+		};
+	};
+
+	gpio_leds: leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "phyflex:green";
+			gpios = <&gpio1 30 0>;
+		};
+
+		red {
+			label = "phyflex:red";
+			gpios = <&gpio2 31 0>;
+		};
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 0>;
+
+	flash@0 {
+		compatible = "m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	pmic@58 {
+		compatible = "dialog,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <17 0x8>; /* active-low GPIO4_17 */
+
+		regulators {
+			vddcore_reg: bcore1 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vddsoc_reg: bcore2 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_reg: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_buckmem_reg: bmem {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_reg: bio {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io_reg: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_mx6_snvs_reg: ldo5 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_pmic_io_reg: ldo6 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_sd0_reg: ldo9 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_sd1_reg: ldo10 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_mx6_high_reg: ldo11 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-phytec-pfla02 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+				MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000 /* PMIC interrupt */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
+				MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__USB_H1_PWR		0x80000000
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_cdwp: usdhc3cdwp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "disabled";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 0>;
+	wp-gpios = <&gpio1 2 0>;
+	status = "disabled";
+};
+
+&usdhc3 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_usdhc3
+		     &pinctrl_usdhc3_cdwp>;
+        cd-gpios = <&gpio1 27 0>;
+        wp-gpios = <&gpio1 29 0>;
+        status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index ff6f1e8f2dd9..009abd69385d 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -10,17 +10,46 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	memory {
 		reg = <0x10000000 0x80000000>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif",
+			   "fsl,imx-sabreauto-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
 };
 
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1 &pinctrl_ecspi1_sabreauto>;
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
 	status = "disabled"; /* pin conflict with WEIM NOR */
 
 	flash: m25p80@0 {
@@ -34,22 +63,130 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_2>;
+	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	status = "okay";
 };
 
 &gpmi {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	hog {
+	imx6qdl-sabreauto {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
@@ -57,28 +194,245 @@
 				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
 			>;
 		};
-	};
 
-	ecspi1 {
-		pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			>;
+		};
+
+		pinctrl_ecspi1_cs: ecspi1cs {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
 			>;
 		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_weim_cs0: weimcs0grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+			>;
+		};
+
+		pinctrl_weim_nor: weimnorgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
+				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
 	};
 };
 
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
 &uart4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4_1>;
+	pinctrl-0 = <&pinctrl_uart4>;
 	status = "okay";
 };
 
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3_1>;
-	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio6 15 0>;
 	wp-gpios = <&gpio1 13 0>;
 	status = "okay";
@@ -86,7 +440,7 @@
 
 &weim {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim_nor_1 &pinctrl_weim_cs0_1>;
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
 	#address-cells = <2>;
 	#size-cells = <1>;
 	ranges = <0 0 0x08000000 0x08000000>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
new file mode 100644
index 000000000000..6df6127bf835
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -0,0 +1,427 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "sst,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-sabrelite {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				/* Phy reset */
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				/* Menu Button */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				/* Home Button */
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				/* Back Button */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* Volume Up Button */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Volume Down Button */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0	/* WP */
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	wp-gpios = <&gpio7 1 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio2 6 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index e75e11b36dff..40ea36534643 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -10,16 +10,26 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	memory {
 		reg = <0x10000000 0x40000000>;
 	};
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb_otg_vbus: usb_otg_vbus {
+		reg_usb_otg_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb_otg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -27,8 +37,9 @@
 			enable-active-high;
 		};
 
-		reg_usb_h1_vbus: usb_h1_vbus {
+		reg_usb_h1_vbus: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "usb_h1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -36,8 +47,9 @@
 			enable-active-high;
 		};
 
-		reg_audio: wm8962_supply {
+		reg_audio: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			regulator-name = "wm8962-supply";
 			gpio = <&gpio4 10 0>;
 			enable-active-high;
@@ -46,19 +58,28 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+			linux,code = <KEY_POWER>;
+		};
 
 		volume-up {
 			label = "Volume Up";
-			gpios = <&gpio1 4 0>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 			gpio-key,wakeup;
-			linux,code = <115>; /* KEY_VOLUMEUP */
+			linux,code = <KEY_VOLUMEUP>;
 		};
 
 		volume-down {
 			label = "Volume Down";
-			gpios = <&gpio1 5 0>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 			gpio-key,wakeup;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
+			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
 
@@ -88,11 +109,22 @@
 		default-brightness-level = <7>;
 		status = "okay";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		red {
+		        gpios = <&gpio1 2 0>;
+		        default-state = "on";
+		};
+	};
 };
 
 &audmux {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_2>;
+	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 };
 
@@ -100,7 +132,7 @@
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 9 0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_2>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
 	flash: m25p80@0 {
@@ -114,16 +146,21 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
+	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 25 0>;
 	status = "okay";
 };
 
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_2>;
+	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
 	codec: wm8962@1a {
@@ -149,10 +186,116 @@
        };
 };
 
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
 &i2c3 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3_2>;
+	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
 	egalax_ts@04 {
@@ -168,11 +311,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	hog {
+	imx6qdl-sabresd {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04   0x80000000
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05   0x80000000
 				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
 				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
 				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
@@ -184,6 +325,151 @@
 				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
 			>;
 		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x80000000
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x80000000
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
+			>;
+		};
 	};
 };
 
@@ -212,9 +498,16 @@
 	};
 };
 
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 0>;
+	status = "okay";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_1>;
+	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
@@ -225,7 +518,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
@@ -237,14 +530,14 @@
 &usbotg {
 	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_2>;
+	pinctrl-0 = <&pinctrl_usbotg>;
 	disable-over-current;
 	status = "okay";
 };
 
 &usdhc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2_1>;
+	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <8>;
 	cd-gpios = <&gpio2 2 0>;
 	wp-gpios = <&gpio2 3 0>;
@@ -253,9 +546,18 @@
 
 &usdhc3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <8>;
 	cd-gpios = <&gpio2 0 0>;
 	wp-gpios = <&gpio2 1 0>;
 	status = "okay";
 };
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 35f547929167..5c6f10c43f65 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -12,17 +12,21 @@
 / {
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_2p5v: 2p5v {
+		reg_2p5v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "2P5V";
 			regulator-min-microvolt = <2500000>;
 			regulator-max-microvolt = <2500000>;
 			regulator-always-on;
 		};
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -54,14 +58,26 @@
 
 &audmux {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_2>;
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c1>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 };
 
 &i2c2 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_2>;
+	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
 	codec: sgtl5000@0a {
@@ -77,7 +93,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	hog {
+	imx6qdl-wandboard {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1 	 0x130b0
@@ -91,20 +107,128 @@
 				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x80000000
 			>;
 		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL 		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA 		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RXD0__SPDIF_OUT		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
 	};
 };
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
+	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio3 29 0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	status = "okay";
 };
 
 &spdif {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif_3>;
+	pinctrl-0 = <&pinctrl_spdif>;
 	status = "okay";
 };
 
@@ -115,13 +239,13 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_2>;
+	pinctrl-0 = <&pinctrl_uart3>;
 	fsl,uart-has-rtscts;
 	status = "okay";
 };
@@ -132,7 +256,7 @@
 
 &usbotg {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
+	pinctrl-0 = <&pinctrl_usbotg>;
 	disable-over-current;
 	dr_mode = "peripheral";
 	status = "okay";
@@ -140,21 +264,21 @@
 
 &usdhc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_2>;
+	pinctrl-0 = <&pinctrl_usdhc1>;
 	cd-gpios = <&gpio1 2 0>;
 	status = "okay";
 };
 
 &usdhc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2_2>;
+	pinctrl-0 = <&pinctrl_usdhc2>;
 	non-removable;
 	status = "okay";
 };
 
 &usdhc3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	pinctrl-0 = <&pinctrl_usdhc3>;
 	cd-gpios = <&gpio3 9 0>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index fb28b2ecb1db..ce0599134a69 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -10,10 +10,15 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
 #include "skeleton.dtsi"
 
 / {
 	aliases {
+		ethernet0 = &fec;
+		can0 = &can1;
+		can1 = &can2;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -24,6 +29,10 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		mmc3 = &usdhc4;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -33,13 +42,13 @@
 		spi1 = &ecspi2;
 		spi2 = &ecspi3;
 		spi3 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
 	};
 
 	intc: interrupt-controller@00a01000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		interrupt-controller;
 		reg = <0x00a01000 0x1000>,
 		      <0x00a00100 0x100>;
@@ -51,16 +60,19 @@
 
 		ckil {
 			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
 			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
 			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
@@ -75,7 +87,10 @@
 		dma_apbh: dma-apbh@00110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x00110000 0x2000>;
-			interrupts = <0 13 0x04>, <0 13 0x04>, <0 13 0x04>, <0 13 0x04>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
@@ -88,7 +103,7 @@
 			#size-cells = <1>;
 			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
 			reg-names = "gpmi-nand", "bch";
-			interrupts = <0 15 0x04>;
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "bch";
 			clocks = <&clks 152>, <&clks 153>, <&clks 151>,
 				 <&clks 150>, <&clks 149>;
@@ -109,7 +124,7 @@
 		L2: l2-cache@00a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
-			interrupts = <0 92 0x04>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-level = <2>;
 			arm,tag-latency = <4 2 3>;
@@ -126,15 +141,22 @@
 				  0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
 				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
-			interrupts = <0 123 0x04>;
-			clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
-			clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 144>, <&clks 206>, <&clks 189>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy";
 			status = "disabled";
 		};
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 94 0x04>;
+			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		aips-bus@02000000 { /* AIPS1 */
@@ -154,7 +176,7 @@
 				spdif: spdif@02004000 {
 					compatible = "fsl,imx35-spdif";
 					reg = <0x02004000 0x4000>;
-					interrupts = <0 52 0x04>;
+					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 14 18 0>,
 					       <&sdma 15 18 0>;
 					dma-names = "rx", "tx";
@@ -176,9 +198,11 @@
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02008000 0x4000>;
-					interrupts = <0 31 0x04>;
+					interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 112>, <&clks 112>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -187,9 +211,11 @@
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x0200c000 0x4000>;
-					interrupts = <0 32 0x04>;
+					interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 113>, <&clks 113>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -198,9 +224,11 @@
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02010000 0x4000>;
-					interrupts = <0 33 0x04>;
+					interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 114>, <&clks 114>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -209,16 +237,18 @@
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02014000 0x4000>;
-					interrupts = <0 34 0x04>;
+					interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 115>, <&clks 115>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
 				uart1: serial@02020000 {
 					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
-					interrupts = <0 26 0x04>;
+					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 160>, <&clks 161>;
 					clock-names = "ipg", "per";
 					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
@@ -228,13 +258,15 @@
 
 				esai: esai@02024000 {
 					reg = <0x02024000 0x4000>;
-					interrupts = <0 51 0x04>;
+					interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
 				ssi1: ssi@02028000 {
-					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+					compatible = "fsl,imx6q-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
 					reg = <0x02028000 0x4000>;
-					interrupts = <0 46 0x04>;
+					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 178>;
 					dmas = <&sdma 37 1 0>,
 					       <&sdma 38 1 0>;
@@ -245,9 +277,11 @@
 				};
 
 				ssi2: ssi@0202c000 {
-					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+					compatible = "fsl,imx6q-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
 					reg = <0x0202c000 0x4000>;
-					interrupts = <0 47 0x04>;
+					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 179>;
 					dmas = <&sdma 41 1 0>,
 					       <&sdma 42 1 0>;
@@ -258,9 +292,11 @@
 				};
 
 				ssi3: ssi@02030000 {
-					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+					compatible = "fsl,imx6q-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
 					reg = <0x02030000 0x4000>;
-					interrupts = <0 48 0x04>;
+					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 180>;
 					dmas = <&sdma 45 1 0>,
 					       <&sdma 46 1 0>;
@@ -272,7 +308,7 @@
 
 				asrc: asrc@02034000 {
 					reg = <0x02034000 0x4000>;
-					interrupts = <0 50 0x04>;
+					interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
 				spba@0203c000 {
@@ -282,7 +318,8 @@
 
 			vpu: vpu@02040000 {
 				reg = <0x02040000 0x3c000>;
-				interrupts = <0 3 0x04 0 12 0x04>;
+				interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
+				             <0 12 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			aipstz@0207c000 { /* AIPSTZ1 */
@@ -293,7 +330,7 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
-				interrupts = <0 83 0x04>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 62>, <&clks 145>;
 				clock-names = "ipg", "per";
 			};
@@ -302,7 +339,7 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
-				interrupts = <0 84 0x04>;
+				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 62>, <&clks 146>;
 				clock-names = "ipg", "per";
 			};
@@ -311,7 +348,7 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
-				interrupts = <0 85 0x04>;
+				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 62>, <&clks 147>;
 				clock-names = "ipg", "per";
 			};
@@ -320,7 +357,7 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
-				interrupts = <0 86 0x04>;
+				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 62>, <&clks 148>;
 				clock-names = "ipg", "per";
 			};
@@ -328,23 +365,25 @@
 			can1: flexcan@02090000 {
 				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02090000 0x4000>;
-				interrupts = <0 110 0x04>;
+				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 108>, <&clks 109>;
 				clock-names = "ipg", "per";
+				status = "disabled";
 			};
 
 			can2: flexcan@02094000 {
 				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02094000 0x4000>;
-				interrupts = <0 111 0x04>;
+				interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 110>, <&clks 111>;
 				clock-names = "ipg", "per";
+				status = "disabled";
 			};
 
 			gpt: gpt@02098000 {
 				compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
 				reg = <0x02098000 0x4000>;
-				interrupts = <0 55 0x04>;
+				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 119>, <&clks 120>;
 				clock-names = "ipg", "per";
 			};
@@ -352,7 +391,8 @@
 			gpio1: gpio@0209c000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x0209c000 0x4000>;
-				interrupts = <0 66 0x04 0 67 0x04>;
+				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 67 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -362,7 +402,8 @@
 			gpio2: gpio@020a0000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a0000 0x4000>;
-				interrupts = <0 68 0x04 0 69 0x04>;
+				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 69 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -372,7 +413,8 @@
 			gpio3: gpio@020a4000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a4000 0x4000>;
-				interrupts = <0 70 0x04 0 71 0x04>;
+				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 71 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -382,7 +424,8 @@
 			gpio4: gpio@020a8000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a8000 0x4000>;
-				interrupts = <0 72 0x04 0 73 0x04>;
+				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 73 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -392,7 +435,8 @@
 			gpio5: gpio@020ac000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020ac000 0x4000>;
-				interrupts = <0 74 0x04 0 75 0x04>;
+				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 75 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -402,7 +446,8 @@
 			gpio6: gpio@020b0000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020b0000 0x4000>;
-				interrupts = <0 76 0x04 0 77 0x04>;
+				interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 77 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -412,7 +457,8 @@
 			gpio7: gpio@020b4000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020b4000 0x4000>;
-				interrupts = <0 78 0x04 0 79 0x04>;
+				interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 79 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -421,20 +467,20 @@
 
 			kpp: kpp@020b8000 {
 				reg = <0x020b8000 0x4000>;
-				interrupts = <0 82 0x04>;
+				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			wdog1: wdog@020bc000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
-				interrupts = <0 80 0x04>;
+				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 0>;
 			};
 
 			wdog2: wdog@020c0000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
-				interrupts = <0 81 0x04>;
+				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 0>;
 				status = "disabled";
 			};
@@ -442,14 +488,17 @@
 			clks: ccm@020c4000 {
 				compatible = "fsl,imx6q-ccm";
 				reg = <0x020c4000 0x4000>;
-				interrupts = <0 87 0x04 0 88 0x04>;
+				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 			};
 
 			anatop: anatop@020c8000 {
 				compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
 				reg = <0x020c8000 0x1000>;
-				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
 
 				regulator-1p1@110 {
 					compatible = "fsl,anatop-regulator";
@@ -495,7 +544,7 @@
 
 				reg_arm: regulator-vddcore@140 {
 					compatible = "fsl,anatop-regulator";
-					regulator-name = "cpu";
+					regulator-name = "vddarm";
 					regulator-min-microvolt = <725000>;
 					regulator-max-microvolt = <1450000>;
 					regulator-always-on;
@@ -547,23 +596,26 @@
 
 			tempmon: tempmon {
 				compatible = "fsl,imx6q-tempmon";
-				interrupts = <0 49 0x04>;
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
 				fsl,tempmon = <&anatop>;
 				fsl,tempmon-data = <&ocotp>;
+				clocks = <&clks 172>;
 			};
 
 			usbphy1: usbphy@020c9000 {
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
-				interrupts = <0 44 0x04>;
+				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 182>;
+				fsl,anatop = <&anatop>;
 			};
 
 			usbphy2: usbphy@020ca000 {
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020ca000 0x1000>;
-				interrupts = <0 45 0x04>;
+				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 183>;
+				fsl,anatop = <&anatop>;
 			};
 
 			snvs@020cc000 {
@@ -575,31 +627,34 @@
 				snvs-rtc-lp@34 {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
 					reg = <0x34 0x58>;
-					interrupts = <0 19 0x04 0 20 0x04>;
+					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 			};
 
 			epit1: epit@020d0000 { /* EPIT1 */
 				reg = <0x020d0000 0x4000>;
-				interrupts = <0 56 0x04>;
+				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			epit2: epit@020d4000 { /* EPIT2 */
 				reg = <0x020d4000 0x4000>;
-				interrupts = <0 57 0x04>;
+				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			src: src@020d8000 {
 				compatible = "fsl,imx6q-src", "fsl,imx51-src";
 				reg = <0x020d8000 0x4000>;
-				interrupts = <0 91 0x04 0 96 0x04>;
+				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 96 IRQ_TYPE_LEVEL_HIGH>;
 				#reset-cells = <1>;
 			};
 
 			gpc: gpc@020dc000 {
 				compatible = "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
-				interrupts = <0 89 0x04 0 90 0x04>;
+				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 90 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			gpr: iomuxc-gpr@020e0000 {
@@ -610,778 +665,103 @@
 			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
 				reg = <0x020e0000 0x4000>;
+			};
 
-				audmux {
-					pinctrl_audmux_1: audmux-1 {
-						fsl,pins = <
-							MX6QDL_PAD_SD2_DAT0__AUD4_RXD  0x80000000
-							MX6QDL_PAD_SD2_DAT3__AUD4_TXC  0x80000000
-							MX6QDL_PAD_SD2_DAT2__AUD4_TXD  0x80000000
-							MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
-						>;
-					};
-
-					pinctrl_audmux_2: audmux-2 {
-						fsl,pins = <
-							MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x80000000
-							MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x80000000
-							MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x80000000
-							MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
-						>;
-					};
-
-					pinctrl_audmux_3: audmux-3 {
-						fsl,pins = <
-							MX6QDL_PAD_DISP0_DAT16__AUD5_TXC  0x80000000
-							MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x80000000
-							MX6QDL_PAD_DISP0_DAT19__AUD5_RXD  0x80000000
-						>;
-					};
-				};
-
-				ecspi1 {
-					pinctrl_ecspi1_1: ecspi1grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
-							MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
-							MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
-						>;
-					};
-
-					pinctrl_ecspi1_2: ecspi1grp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
-							MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
-							MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
-						>;
-					};
-				};
-
-				ecspi3 {
-					pinctrl_ecspi3_1: ecspi3grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
-							MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
-							MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
-						>;
-					};
-				};
-
-				enet {
-					pinctrl_enet_1: enetgrp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-							MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-							MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-							MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
-						>;
-					};
-
-					pinctrl_enet_2: enetgrp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_KEY_COL1__ENET_MDIO        0x1b0b0
-							MX6QDL_PAD_KEY_COL2__ENET_MDC         0x1b0b0
-							MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-						>;
-					};
-
-					pinctrl_enet_3: enetgrp-3 {
-						fsl,pins = <
-							MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-							MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-							MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-							MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
-						>;
-					};
-				};
-
-				esai {
-					pinctrl_esai_1: esaigrp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1b030
-							MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK  0x1b030
-							MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS     0x1b030
-							MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2  0x1b030
-							MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3   0x1b030
-							MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1   0x1b030
-							MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0    0x1b030
-							MX6QDL_PAD_NANDF_CS2__ESAI_TX0       0x1b030
-							MX6QDL_PAD_NANDF_CS3__ESAI_TX1       0x1b030
-						>;
-					};
-
-					pinctrl_esai_2: esaigrp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
-							MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
-							MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
-							MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
-							MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
-							MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
-							MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
-							MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
-							MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
-							MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
-						>;
-					};
-				};
-
-				flexcan1 {
-					pinctrl_flexcan1_1: flexcan1grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
-							MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
-						>;
-					};
-
-					pinctrl_flexcan1_2: flexcan1grp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_GPIO_7__FLEXCAN1_TX   0x80000000
-							MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
-						>;
-					};
-				};
-
-				flexcan2 {
-					pinctrl_flexcan2_1: flexcan2grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
-							MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
-						>;
-					};
-				};
-
-				gpmi-nand {
-					pinctrl_gpmi_nand_1: gpmi-nand-1 {
-						fsl,pins = <
-							MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-							MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-							MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-							MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-							MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-							MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-							MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-							MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-							MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-							MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-							MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-							MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-							MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-							MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-							MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-							MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-							MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
-						>;
-					};
-				};
-
-				hdmi_hdcp {
-					pinctrl_hdmi_hdcp_1: hdmihdcpgrp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
-							MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
-						>;
-					};
-
-					pinctrl_hdmi_hdcp_2: hdmihdcpgrp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
-							MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
-						>;
-					};
-
-					pinctrl_hdmi_hdcp_3: hdmihdcpgrp-3 {
-						fsl,pins = <
-							MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL  0x4001b8b1
-							MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
-						>;
-					};
-				};
-
-				hdmi_cec {
-					pinctrl_hdmi_cec_1: hdmicecgrp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
-						>;
-					};
-
-					pinctrl_hdmi_cec_2: hdmicecgrp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-						>;
-					};
-				};
-
-				i2c1 {
-					pinctrl_i2c1_1: i2c1grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-							MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-						>;
-					};
-
-					pinctrl_i2c1_2: i2c1grp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-							MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-						>;
-					};
-				};
-
-				i2c2 {
-					pinctrl_i2c2_1: i2c2grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
-							MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
-						>;
-					};
-
-					pinctrl_i2c2_2: i2c2grp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-							MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-						>;
-					};
-
-					pinctrl_i2c2_3: i2c2grp-3 {
-						fsl,pins = <
-							MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
-							MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-						>;
-					};
-				};
-
-				i2c3 {
-					pinctrl_i2c3_1: i2c3grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-							MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-						>;
-					};
-
-					pinctrl_i2c3_2: i2c3grp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-							MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-						>;
-					};
-
-					pinctrl_i2c3_3: i2c3grp-3 {
-						fsl,pins = <
-							MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
-							MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
-						>;
-					};
-
-					pinctrl_i2c3_4: i2c3grp-4 {
-						fsl,pins = <
-							MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
-							MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-						>;
-					};
-				};
-
-				ipu1 {
-					pinctrl_ipu1_1: ipu1grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-							MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-							MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-							MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-							MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04        0x80000000
-							MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-							MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-							MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-							MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-							MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-							MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-							MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-							MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-							MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-							MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-							MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-							MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-							MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-							MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-							MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-							MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-							MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-							MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-							MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-							MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-							MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-							MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-							MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-							MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-						>;
-					};
-
-					pinctrl_ipu1_2: ipu1grp-2 { /* parallel camera */
-						fsl,pins = <
-							MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x80000000
-							MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x80000000
-							MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x80000000
-							MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x80000000
-							MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x80000000
-							MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x80000000
-							MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x80000000
-							MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x80000000
-							MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x80000000
-							MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x80000000
-							MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x80000000
-							MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x80000000
-						>;
-					};
-
-					pinctrl_ipu1_3: ipu1grp-3 { /* parallel port 16-bit */
-						fsl,pins = <
-							MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04   0x80000000
-							MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05   0x80000000
-							MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06   0x80000000
-							MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07   0x80000000
-							MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08   0x80000000
-							MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09   0x80000000
-							MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10  0x80000000
-							MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11  0x80000000
-							MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x80000000
-							MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x80000000
-							MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x80000000
-							MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x80000000
-							MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x80000000
-							MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x80000000
-							MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x80000000
-							MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x80000000
-							MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x80000000
-							MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x80000000
-							MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x80000000
-						>;
-					};
-				};
-
-				mlb {
-					pinctrl_mlb_1: mlbgrp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_GPIO_3__MLB_CLK  0x71
-							MX6QDL_PAD_GPIO_6__MLB_SIG  0x71
-							MX6QDL_PAD_GPIO_2__MLB_DATA 0x71
-						>;
-					};
-
-					pinctrl_mlb_2: mlbgrp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_ENET_TXD1__MLB_CLK 0x71
-							MX6QDL_PAD_GPIO_6__MLB_SIG    0x71
-							MX6QDL_PAD_GPIO_2__MLB_DATA   0x71
-						>;
-					};
-				};
-
-				pwm0 {
-					pinctrl_pwm0_1: pwm0grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
-						>;
-					};
-				};
-
-				pwm3 {
-					pinctrl_pwm3_1: pwm3grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-						>;
-					};
-				};
-
-				spdif {
-					pinctrl_spdif_1: spdifgrp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
-						>;
-					};
-
-					pinctrl_spdif_2: spdifgrp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
-							MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
-						>;
-					};
-
-					pinctrl_spdif_3: spdifgrp-3 {
-						fsl,pins = <
-							MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0
-						>;
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1_1: uart1grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-							MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				uart2 {
-					pinctrl_uart2_1: uart2grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
-							MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
-						>;
-					};
-
-					pinctrl_uart2_2: uart2grp-2 { /* DTE mode */
-						fsl,pins = <
-							MX6QDL_PAD_EIM_D26__UART2_RX_DATA   0x1b0b1
-							MX6QDL_PAD_EIM_D27__UART2_TX_DATA   0x1b0b1
-							MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
-							MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
-						>;
-					};
-				};
-
-				uart3 {
-					pinctrl_uart3_1: uart3grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
-							MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
-							MX6QDL_PAD_EIM_D30__UART3_CTS_B   0x1b0b1
-							MX6QDL_PAD_EIM_EB3__UART3_RTS_B   0x1b0b1
-						>;
-					};
-
-					pinctrl_uart3_2: uart3grp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-							MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-							MX6QDL_PAD_EIM_D23__UART3_CTS_B	  0x1b0b1
-							MX6QDL_PAD_EIM_EB3__UART3_RTS_B	  0x1b0b1
-						>;
-					};
-				};
-
-				uart4 {
-					pinctrl_uart4_1: uart4grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-							MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				usbotg {
-					pinctrl_usbotg_1: usbotggrp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-						>;
-					};
-
-					pinctrl_usbotg_2: usbotggrp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-						>;
-					};
-				};
-
-				usbh2 {
-					pinctrl_usbh2_1: usbh2grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x40013030
-							MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x40013030
-						>;
-					};
-
-					pinctrl_usbh2_2: usbh2grp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x40017030
-						>;
-					};
-				};
-
-				usbh3 {
-					pinctrl_usbh3_1: usbh3grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x40013030
-							MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE  0x40013030
-						>;
-					};
+			ldb: ldb@020e0008 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
+				gpr = <&gpr>;
+				status = "disabled";
 
-					pinctrl_usbh3_2: usbh3grp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x40017030
-						>;
-					};
-				};
+				lvds-channel@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					status = "disabled";
 
-				usdhc1 {
-					pinctrl_usdhc1_1: usdhc1grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-							MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-							MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-							MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-							MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-							MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-							MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17059
-							MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17059
-							MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17059
-							MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17059
-						>;
-					};
+					port@0 {
+						reg = <0>;
 
-					pinctrl_usdhc1_2: usdhc1grp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-							MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-							MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-							MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-							MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-							MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-						>;
+						lvds0_mux_0: endpoint {
+							remote-endpoint = <&ipu1_di0_lvds0>;
+						};
 					};
-				};
 
-				usdhc2 {
-					pinctrl_usdhc2_1: usdhc2grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-							MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-							MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-							MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-							MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-							MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-							MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
-							MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
-							MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
-							MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
-						>;
-					};
+					port@1 {
+						reg = <1>;
 
-					pinctrl_usdhc2_2: usdhc2grp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-							MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-							MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-							MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-							MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-							MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-						>;
+						lvds0_mux_1: endpoint {
+							remote-endpoint = <&ipu1_di1_lvds0>;
+						};
 					};
 				};
 
-				usdhc3 {
-					pinctrl_usdhc3_1: usdhc3grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-							MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-							MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-							MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-							MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-							MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-						>;
-					};
-
-					pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz { /* 100Mhz */
-						fsl,pins = <
-							MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
-							MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
-							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
-							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
-							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
-							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
-							MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
-							MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
-							MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
-							MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
-						>;
-					};
-
-					pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz { /* 200Mhz */
-						fsl,pins = <
-							MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
-							MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
-							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
-							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
-							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
-							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
-							MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
-							MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
-							MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
-							MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
-						>;
-					};
-
-					pinctrl_usdhc3_2: usdhc3grp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-							MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-						>;
-					};
-				};
+				lvds-channel@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					status = "disabled";
 
-				usdhc4 {
-					pinctrl_usdhc4_1: usdhc4grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17059
-							MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10059
-							MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
-							MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
-							MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
-							MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
-							MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
-							MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
-							MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
-							MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
-						>;
-					};
+					port@0 {
+						reg = <0>;
 
-					pinctrl_usdhc4_2: usdhc4grp-2 {
-						fsl,pins = <
-							MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17059
-							MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10059
-							MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
-							MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
-							MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
-							MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
-						>;
+						lvds1_mux_0: endpoint {
+							remote-endpoint = <&ipu1_di0_lvds1>;
+						};
 					};
-				};
 
-				weim {
-					pinctrl_weim_cs0_1: weim_cs0grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_EIM_CS0__EIM_CS0_B   0xb0b1
-						>;
-					};
+					port@1 {
+						reg = <1>;
 
-					pinctrl_weim_nor_1: weim_norgrp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_EIM_OE__EIM_OE_B     0xb0b1
-							MX6QDL_PAD_EIM_RW__EIM_RW       0xb0b1
-							MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
-							/* data */
-							MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
-							MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
-							MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
-							MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
-							MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
-							MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
-							MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
-							MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
-							MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
-							MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
-							MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
-							MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
-							MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
-							MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
-							MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
-							MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
-							/* address */
-							MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
-							MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
-							MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
-							MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
-							MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
-							MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
-							MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
-							MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
-							MX6QDL_PAD_EIM_DA15__EIM_AD15  0xb0b1
-							MX6QDL_PAD_EIM_DA14__EIM_AD14  0xb0b1
-							MX6QDL_PAD_EIM_DA13__EIM_AD13  0xb0b1
-							MX6QDL_PAD_EIM_DA12__EIM_AD12  0xb0b1
-							MX6QDL_PAD_EIM_DA11__EIM_AD11  0xb0b1
-							MX6QDL_PAD_EIM_DA10__EIM_AD10  0xb0b1
-							MX6QDL_PAD_EIM_DA9__EIM_AD09   0xb0b1
-							MX6QDL_PAD_EIM_DA8__EIM_AD08   0xb0b1
-							MX6QDL_PAD_EIM_DA7__EIM_AD07   0xb0b1
-							MX6QDL_PAD_EIM_DA6__EIM_AD06   0xb0b1
-							MX6QDL_PAD_EIM_DA5__EIM_AD05   0xb0b1
-							MX6QDL_PAD_EIM_DA4__EIM_AD04   0xb0b1
-							MX6QDL_PAD_EIM_DA3__EIM_AD03   0xb0b1
-							MX6QDL_PAD_EIM_DA2__EIM_AD02   0xb0b1
-							MX6QDL_PAD_EIM_DA1__EIM_AD01   0xb0b1
-							MX6QDL_PAD_EIM_DA0__EIM_AD00   0xb0b1
-						>;
+						lvds1_mux_1: endpoint {
+							remote-endpoint = <&ipu1_di1_lvds1>;
+						};
 					};
 				};
 			};
 
-			ldb: ldb@020e0008 {
+			hdmi: hdmi@0120000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
+				reg = <0x00120000 0x9000>;
+				interrupts = <0 115 0x04>;
 				gpr = <&gpr>;
+				clocks = <&clks 123>, <&clks 124>;
+				clock-names = "iahb", "isfr";
 				status = "disabled";
 
-				lvds-channel@0 {
+				port@0 {
 					reg = <0>;
-					status = "disabled";
+
+					hdmi_mux_0: endpoint {
+						remote-endpoint = <&ipu1_di0_hdmi>;
+					};
 				};
 
-				lvds-channel@1 {
+				port@1 {
 					reg = <1>;
-					status = "disabled";
+
+					hdmi_mux_1: endpoint {
+						remote-endpoint = <&ipu1_di1_hdmi>;
+					};
 				};
 			};
 
 			dcic1: dcic@020e4000 {
 				reg = <0x020e4000 0x4000>;
-				interrupts = <0 124 0x04>;
+				interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			dcic2: dcic@020e8000 {
 				reg = <0x020e8000 0x4000>;
-				interrupts = <0 125 0x04>;
+				interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sdma: sdma@020ec000 {
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
-				interrupts = <0 2 0x04>;
+				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 155>, <&clks 155>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
@@ -1398,7 +778,8 @@
 
 			caam@02100000 {
 				reg = <0x02100000 0x40000>;
-				interrupts = <0 105 0x04 0 106 0x04>;
+				interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 106 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			aipstz@0217c000 { /* AIPSTZ2 */
@@ -1408,7 +789,7 @@
 			usbotg: usb@02184000 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
-				interrupts = <0 43 0x04>;
+				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 162>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
@@ -1418,7 +799,7 @@
 			usbh1: usb@02184200 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
-				interrupts = <0 40 0x04>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 162>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
@@ -1428,7 +809,7 @@
 			usbh2: usb@02184400 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
-				interrupts = <0 41 0x04>;
+				interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 162>;
 				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
@@ -1437,7 +818,7 @@
 			usbh3: usb@02184600 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184600 0x200>;
-				interrupts = <0 42 0x04>;
+				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 162>;
 				fsl,usbmisc = <&usbmisc 3>;
 				status = "disabled";
@@ -1453,7 +834,9 @@
 			fec: ethernet@02188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
-				interrupts = <0 118 0x04 0 119 0x04>;
+				interrupts-extended =
+					<&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
+					<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 117>, <&clks 117>, <&clks 190>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
@@ -1461,13 +844,15 @@
 
 			mlb@0218c000 {
 				reg = <0x0218c000 0x4000>;
-				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+				interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 126 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			usdhc1: usdhc@02190000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
-				interrupts = <0 22 0x04>;
+				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -1477,7 +862,7 @@
 			usdhc2: usdhc@02194000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
-				interrupts = <0 23 0x04>;
+				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -1487,7 +872,7 @@
 			usdhc3: usdhc@02198000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
-				interrupts = <0 24 0x04>;
+				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -1497,7 +882,7 @@
 			usdhc4: usdhc@0219c000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
-				interrupts = <0 25 0x04>;
+				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -1509,7 +894,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a0000 0x4000>;
-				interrupts = <0 36 0x04>;
+				interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 125>;
 				status = "disabled";
 			};
@@ -1519,7 +904,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a4000 0x4000>;
-				interrupts = <0 37 0x04>;
+				interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 126>;
 				status = "disabled";
 			};
@@ -1529,7 +914,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a8000 0x4000>;
-				interrupts = <0 38 0x04>;
+				interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 127>;
 				status = "disabled";
 			};
@@ -1550,7 +935,7 @@
 			weim: weim@021b8000 {
 				compatible = "fsl,imx6q-weim";
 				reg = <0x021b8000 0x4000>;
-				interrupts = <0 14 0x04>;
+				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 196>;
 			};
 
@@ -1561,12 +946,12 @@
 
 			tzasc@021d0000 { /* TZASC1 */
 				reg = <0x021d0000 0x4000>;
-				interrupts = <0 108 0x04>;
+				interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			tzasc@021d4000 { /* TZASC2 */
 				reg = <0x021d4000 0x4000>;
-				interrupts = <0 109 0x04>;
+				interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			audmux: audmux@021d8000 {
@@ -1575,23 +960,42 @@
 				status = "disabled";
 			};
 
-			mipi@021dc000 { /* MIPI-CSI */
+			mipi_csi: mipi@021dc000 {
 				reg = <0x021dc000 0x4000>;
 			};
 
-			mipi@021e0000 { /* MIPI-DSI */
+			mipi_dsi: mipi@021e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0x021e0000 0x4000>;
+				status = "disabled";
+
+				port@0 {
+					reg = <0>;
+
+					mipi_mux_0: endpoint {
+						remote-endpoint = <&ipu1_di0_mipi>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					mipi_mux_1: endpoint {
+						remote-endpoint = <&ipu1_di1_mipi>;
+					};
+				};
 			};
 
 			vdoa@021e4000 {
 				reg = <0x021e4000 0x4000>;
-				interrupts = <0 18 0x04>;
+				interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			uart2: serial@021e8000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021e8000 0x4000>;
-				interrupts = <0 27 0x04>;
+				interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
@@ -1602,7 +1006,7 @@
 			uart3: serial@021ec000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021ec000 0x4000>;
-				interrupts = <0 28 0x04>;
+				interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
@@ -1613,7 +1017,7 @@
 			uart4: serial@021f0000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f0000 0x4000>;
-				interrupts = <0 29 0x04>;
+				interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
@@ -1624,7 +1028,7 @@
 			uart5: serial@021f4000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f4000 0x4000>;
-				interrupts = <0 30 0x04>;
+				interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
@@ -1634,13 +1038,65 @@
 		};
 
 		ipu1: ipu@02400000 {
-			#crtc-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,imx6q-ipu";
 			reg = <0x02400000 0x400000>;
-			interrupts = <0 6 0x4 0 5 0x4>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks 130>, <&clks 131>, <&clks 132>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
+
+			ipu1_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu1_di0_disp0: endpoint@0 {
+				};
+
+				ipu1_di0_hdmi: endpoint@1 {
+					remote-endpoint = <&hdmi_mux_0>;
+				};
+
+				ipu1_di0_mipi: endpoint@2 {
+					remote-endpoint = <&mipi_mux_0>;
+				};
+
+				ipu1_di0_lvds0: endpoint@3 {
+					remote-endpoint = <&lvds0_mux_0>;
+				};
+
+				ipu1_di0_lvds1: endpoint@4 {
+					remote-endpoint = <&lvds1_mux_0>;
+				};
+			};
+
+			ipu1_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu1_di0_disp1: endpoint@0 {
+				};
+
+				ipu1_di1_hdmi: endpoint@1 {
+					remote-endpoint = <&hdmi_mux_1>;
+				};
+
+				ipu1_di1_mipi: endpoint@2 {
+					remote-endpoint = <&mipi_mux_1>;
+				};
+
+				ipu1_di1_lvds0: endpoint@3 {
+					remote-endpoint = <&lvds0_mux_1>;
+				};
+
+				ipu1_di1_lvds1: endpoint@4 {
+					remote-endpoint = <&lvds1_mux_1>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index cc68e19c5163..a8d9a93fab85 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -8,6 +8,8 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include "imx6sl.dtsi"
 
 / {
@@ -18,11 +20,26 @@
 		reg = <0x80000000 0x40000000>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb_otg1_vbus: usb_otg1_vbus {
+		reg_usb_otg1_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb_otg1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -30,22 +47,63 @@
 			enable-active-high;
 		};
 
-		reg_usb_otg2_vbus: usb_otg2_vbus {
+		reg_usb_otg2_vbus: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "usb_otg2_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 2 0>;
 			enable-active-high;
 		};
+
+		reg_aud3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "wm8962-supply-3v15";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3150000>;
+			regulator-boot-on;
+		};
+
+		reg_aud4v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "wm8962-supply-4v2";
+			regulator-min-microvolt = <4325000>;
+			regulator-max-microvolt = <4325000>;
+			regulator-boot-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
 	};
 };
 
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 11 0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
 	flash: m25p80@0 {
@@ -59,16 +117,144 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec_1>;
+	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
 	status = "okay";
 };
 
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	hog {
+	imx6sl-evk {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
@@ -78,21 +264,231 @@
 				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
 				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
 				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
+				MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+			>;
+		};
+
+		pinctrl_audmux3: audmux3grp {
+			fsl,pins = <
+				MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130b0
+				MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130b0
+				MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110b0
+				MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
+				MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
+				MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
+				MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11	0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX6SL_PAD_FEC_MDC__FEC_MDC		0x1b0b0
+				MX6SL_PAD_FEC_MDIO__FEC_MDIO		0x1b0b0
+				MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV		0x1b0b0
+				MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0	0x1b0b0
+				MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1	0x1b0b0
+				MX6SL_PAD_FEC_TX_EN__FEC_TX_EN		0x1b0b0
+				MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0	0x1b0b0
+				MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1	0x1b0b0
+				MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
+				MX6SL_PAD_I2C1_SDA__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C2_SCL__I2C2_SCL	0x4001b8b1
+				MX6SL_PAD_I2C2_SDA__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
+				MX6SL_PAD_KEY_ROW1__KEY_ROW1    0x1b010
+				MX6SL_PAD_KEY_ROW2__KEY_ROW2    0x1b0b0
+				MX6SL_PAD_KEY_COL0__KEY_COL0    0x110b0
+				MX6SL_PAD_KEY_COL1__KEY_COL1    0x110b0
+				MX6SL_PAD_KEY_COL2__KEY_COL2    0x110b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
+				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg1: usbotg1grp {
+			fsl,pins = <
+				MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x17059
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x10059
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x17059
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x17059
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x17059
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170b9
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100b9
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170b9
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170b9
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170b9
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170b9
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170b9
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170b9
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170b9
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170f9
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100f9
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170f9
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170f9
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170f9
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100b9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100f9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
 			>;
 		};
 	};
 };
 
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+			MATRIX_KEY(0x0, 0x0, KEY_UP)         /* ROW0, COL0 */
+			MATRIX_KEY(0x0, 0x1, KEY_DOWN)       /* ROW0, COL1 */
+			MATRIX_KEY(0x0, 0x2, KEY_ENTER)      /* ROW0, COL2 */
+			MATRIX_KEY(0x1, 0x0, KEY_HOME)       /* ROW1, COL0 */
+			MATRIX_KEY(0x1, 0x1, KEY_RIGHT)      /* ROW1, COL1 */
+			MATRIX_KEY(0x1, 0x2, KEY_LEFT)       /* ROW1, COL2 */
+			MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
+			MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP)   /* ROW2, COL1 */
+	>;
+	status = "okay";
+};
+
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &usbotg1 {
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1_1>;
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	status = "okay";
 };
@@ -106,9 +502,9 @@
 
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1_1>;
-	pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
 	cd-gpios = <&gpio4 7 0>;
 	wp-gpios = <&gpio4 6 0>;
@@ -117,9 +513,9 @@
 
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2_1>;
-	pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
 	cd-gpios = <&gpio5 0 0>;
 	wp-gpios = <&gpio4 29 0>;
 	status = "okay";
@@ -127,9 +523,9 @@
 
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3_1>;
-	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio3 22 0>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 28558f1aaf2d..2d4e5285f3f3 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -7,12 +7,14 @@
  *
  */
 
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "skeleton.dtsi"
 #include "imx6sl-pinfunc.h"
 #include <dt-bindings/clock/imx6sl-clock.h>
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -27,6 +29,8 @@
 		spi1 = &ecspi2;
 		spi2 = &ecspi3;
 		spi3 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
 	};
 
 	cpus {
@@ -38,14 +42,33 @@
 			device_type = "cpu";
 			reg = <0x0>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1275000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz      SOC-PU uV */
+				996000          1225000
+				792000          1175000
+				396000          1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
+					<&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
+					<&clks IMX6SL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 	};
 
 	intc: interrupt-controller@00a01000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		interrupt-controller;
 		reg = <0x00a01000 0x1000>,
 		      <0x00a00100 0x100>;
@@ -57,11 +80,13 @@
 
 		ckil {
 			compatible = "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		osc {
 			compatible = "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
@@ -73,10 +98,16 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		ocram: sram@00900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			clocks = <&clks IMX6SL_CLK_OCRAM>;
+		};
+
 		L2: l2-cache@00a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
-			interrupts = <0 92 0x04>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-level = <2>;
 			arm,tag-latency = <4 2 3>;
@@ -85,7 +116,7 @@
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 94 0x04>;
+			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		aips1: aips-bus@02000000 {
@@ -104,7 +135,7 @@
 
 				spdif: spdif@02004000 {
 					reg = <0x02004000 0x4000>;
-					interrupts = <0 52 0x04>;
+					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
 				ecspi1: ecspi@02008000 {
@@ -112,7 +143,7 @@
 					#size-cells = <0>;
 					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02008000 0x4000>;
-					interrupts = <0 31 0x04>;
+					interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_ECSPI1>,
 						 <&clks IMX6SL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
@@ -124,7 +155,7 @@
 					#size-cells = <0>;
 					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
 					reg = <0x0200c000 0x4000>;
-					interrupts = <0 32 0x04>;
+					interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_ECSPI2>,
 						 <&clks IMX6SL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
@@ -136,7 +167,7 @@
 					#size-cells = <0>;
 					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02010000 0x4000>;
-					interrupts = <0 33 0x04>;
+					interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_ECSPI3>,
 						 <&clks IMX6SL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
@@ -148,7 +179,7 @@
 					#size-cells = <0>;
 					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02014000 0x4000>;
-					interrupts = <0 34 0x04>;
+					interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_ECSPI4>,
 						 <&clks IMX6SL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
@@ -159,7 +190,7 @@
 					compatible = "fsl,imx6sl-uart",
 						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02018000 0x4000>;
-					interrupts = <0 30 0x04>;
+					interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
@@ -172,7 +203,7 @@
 					compatible = "fsl,imx6sl-uart",
 						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
-					interrupts = <0 26 0x04>;
+					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
@@ -185,7 +216,7 @@
 					compatible = "fsl,imx6sl-uart",
 						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02024000 0x4000>;
-					interrupts = <0 27 0x04>;
+					interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
@@ -195,9 +226,11 @@
 				};
 
 				ssi1: ssi@02028000 {
-					compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
 					reg = <0x02028000 0x4000>;
-					interrupts = <0 46 0x04>;
+					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_SSI1>;
 					dmas = <&sdma 37 1 0>,
 					       <&sdma 38 1 0>;
@@ -207,9 +240,11 @@
 				};
 
 				ssi2: ssi@0202c000 {
-					compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
 					reg = <0x0202c000 0x4000>;
-					interrupts = <0 47 0x04>;
+					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_SSI2>;
 					dmas = <&sdma 41 1 0>,
 					       <&sdma 42 1 0>;
@@ -219,9 +254,11 @@
 				};
 
 				ssi3: ssi@02030000 {
-					compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
 					reg = <0x02030000 0x4000>;
-					interrupts = <0 48 0x04>;
+					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_SSI3>;
 					dmas = <&sdma 45 1 0>,
 					       <&sdma 46 1 0>;
@@ -234,7 +271,7 @@
 					compatible = "fsl,imx6sl-uart",
 						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02034000 0x4000>;
-					interrupts = <0 28 0x04>;
+					interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
@@ -247,7 +284,7 @@
 					compatible = "fsl,imx6sl-uart",
 						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02038000 0x4000>;
-					interrupts = <0 29 0x04>;
+					interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
@@ -261,7 +298,7 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
-				interrupts = <0 83 0x04>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_PWM1>,
 					 <&clks IMX6SL_CLK_PWM1>;
 				clock-names = "ipg", "per";
@@ -271,7 +308,7 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
-				interrupts = <0 84 0x04>;
+				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_PWM2>,
 					 <&clks IMX6SL_CLK_PWM2>;
 				clock-names = "ipg", "per";
@@ -281,7 +318,7 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
-				interrupts = <0 85 0x04>;
+				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_PWM3>,
 					 <&clks IMX6SL_CLK_PWM3>;
 				clock-names = "ipg", "per";
@@ -291,7 +328,7 @@
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
-				interrupts = <0 86 0x04>;
+				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_PWM4>,
 					 <&clks IMX6SL_CLK_PWM4>;
 				clock-names = "ipg", "per";
@@ -300,7 +337,7 @@
 			gpt: gpt@02098000 {
 				compatible = "fsl,imx6sl-gpt";
 				reg = <0x02098000 0x4000>;
-				interrupts = <0 55 0x04>;
+				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_GPT>,
 					 <&clks IMX6SL_CLK_GPT_SERIAL>;
 				clock-names = "ipg", "per";
@@ -309,7 +346,8 @@
 			gpio1: gpio@0209c000 {
 				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 				reg = <0x0209c000 0x4000>;
-				interrupts = <0 66 0x04 0 67 0x04>;
+				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 67 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -319,7 +357,8 @@
 			gpio2: gpio@020a0000 {
 				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 				reg = <0x020a0000 0x4000>;
-				interrupts = <0 68 0x04 0 69 0x04>;
+				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 69 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -329,7 +368,8 @@
 			gpio3: gpio@020a4000 {
 				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 				reg = <0x020a4000 0x4000>;
-				interrupts = <0 70 0x04 0 71 0x04>;
+				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 71 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -339,7 +379,8 @@
 			gpio4: gpio@020a8000 {
 				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 				reg = <0x020a8000 0x4000>;
-				interrupts = <0 72 0x04 0 73 0x04>;
+				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 73 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -349,7 +390,8 @@
 			gpio5: gpio@020ac000 {
 				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 				reg = <0x020ac000 0x4000>;
-				interrupts = <0 74 0x04 0 75 0x04>;
+				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 75 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -357,21 +399,23 @@
 			};
 
 			kpp: kpp@020b8000 {
+				compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
-				interrupts = <0 82 0x04>;
+				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_DUMMY>;
 			};
 
 			wdog1: wdog@020bc000 {
 				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
-				interrupts = <0 80 0x04>;
+				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_DUMMY>;
 			};
 
 			wdog2: wdog@020c0000 {
 				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
-				interrupts = <0 81 0x04>;
+				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_DUMMY>;
 				status = "disabled";
 			};
@@ -379,7 +423,8 @@
 			clks: ccm@020c4000 {
 				compatible = "fsl,imx6sl-ccm";
 				reg = <0x020c4000 0x4000>;
-				interrupts = <0 87 0x04 0 88 0x04>;
+				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 			};
 
@@ -388,7 +433,9 @@
 					     "fsl,imx6q-anatop",
 					     "syscon", "simple-bus";
 				reg = <0x020c8000 0x1000>;
-				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
 
 				regulator-1p1@110 {
 					compatible = "fsl,anatop-regulator";
@@ -434,7 +481,7 @@
 
 				reg_arm: regulator-vddcore@140 {
 					compatible = "fsl,anatop-regulator";
-					regulator-name = "cpu";
+					regulator-name = "vddarm";
 					regulator-min-microvolt = <725000>;
 					regulator-max-microvolt = <1450000>;
 					regulator-always-on;
@@ -487,15 +534,17 @@
 			usbphy1: usbphy@020c9000 {
 				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
-				interrupts = <0 44 0x04>;
+				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
 			};
 
 			usbphy2: usbphy@020ca000 {
 				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020ca000 0x1000>;
-				interrupts = <0 45 0x04>;
+				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USBPHY2>;
+				fsl,anatop = <&anatop>;
 			};
 
 			snvs@020cc000 {
@@ -507,31 +556,33 @@
 				snvs-rtc-lp@34 {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
 					reg = <0x34 0x58>;
-					interrupts = <0 19 0x04 0 20 0x04>;
+					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 			};
 
 			epit1: epit@020d0000 {
 				reg = <0x020d0000 0x4000>;
-				interrupts = <0 56 0x04>;
+				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			epit2: epit@020d4000 {
 				reg = <0x020d4000 0x4000>;
-				interrupts = <0 57 0x04>;
+				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			src: src@020d8000 {
 				compatible = "fsl,imx6sl-src", "fsl,imx51-src";
 				reg = <0x020d8000 0x4000>;
-				interrupts = <0 91 0x04 0 96 0x04>;
+				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 96 IRQ_TYPE_LEVEL_HIGH>;
 				#reset-cells = <1>;
 			};
 
 			gpc: gpc@020dc000 {
 				compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
-				interrupts = <0 89 0x04>;
+				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			gpr: iomuxc-gpr@020e0000 {
@@ -543,235 +594,22 @@
 			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6sl-iomuxc";
 				reg = <0x020e0000 0x4000>;
-
-				ecspi1 {
-					pinctrl_ecspi1_1: ecspi1grp-1 {
-						fsl,pins = <
-							MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1
-							MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1
-							MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1
-						>;
-					};
-				};
-
-				fec {
-					pinctrl_fec_1: fecgrp-1 {
-						fsl,pins = <
-							MX6SL_PAD_FEC_MDC__FEC_MDC         0x1b0b0
-							MX6SL_PAD_FEC_MDIO__FEC_MDIO       0x1b0b0
-							MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV    0x1b0b0
-							MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0   0x1b0b0
-							MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1   0x1b0b0
-							MX6SL_PAD_FEC_TX_EN__FEC_TX_EN     0x1b0b0
-							MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0   0x1b0b0
-							MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1   0x1b0b0
-							MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8
-						>;
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1_1: uart1grp-1 {
-						fsl,pins = <
-							MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
-							MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				usbotg1 {
-					pinctrl_usbotg1_1: usbotg1grp-1 {
-						fsl,pins = <
-							MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
-						>;
-					};
-
-					pinctrl_usbotg1_2: usbotg1grp-2 {
-						fsl,pins = <
-							MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x17059
-						>;
-					};
-
-					pinctrl_usbotg1_3: usbotg1grp-3 {
-						fsl,pins = <
-							MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x17059
-						>;
-					};
-
-					pinctrl_usbotg1_4: usbotg1grp-4 {
-						fsl,pins = <
-							MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x17059
-						>;
-					};
-
-					pinctrl_usbotg1_5: usbotg1grp-5 {
-						fsl,pins = <
-							MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x17059
-						>;
-					};
-				};
-
-				usbotg2 {
-					pinctrl_usbotg2_1: usbotg2grp-1 {
-						fsl,pins = <
-							MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x17059
-						>;
-					};
-
-					pinctrl_usbotg2_2: usbotg2grp-2 {
-						fsl,pins = <
-							MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x17059
-						>;
-					};
-
-					pinctrl_usbotg2_3: usbotg2grp-3 {
-						fsl,pins = <
-							MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x17059
-						>;
-					};
-
-					pinctrl_usbotg2_4: usbotg2grp-4 {
-						fsl,pins = <
-							MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x17059
-						>;
-					};
-				};
-
-				usdhc1 {
-					pinctrl_usdhc1_1: usdhc1grp-1 {
-						fsl,pins = <
-							MX6SL_PAD_SD1_CMD__SD1_CMD    0x17059
-							MX6SL_PAD_SD1_CLK__SD1_CLK    0x10059
-							MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-							MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-							MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-							MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-							MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059
-							MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059
-							MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059
-							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
-						>;
-					};
-
-					pinctrl_usdhc1_1_100mhz: usdhc1grp-1-100mhz {
-						fsl,pins = <
-							MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
-							MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9
-							MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
-							MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
-							MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
-							MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
-							MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
-							MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
-							MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
-							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
-						>;
-					};
-
-					pinctrl_usdhc1_1_200mhz: usdhc1grp-1-200mhz {
-						fsl,pins = <
-							MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
-							MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9
-							MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
-							MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
-							MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
-							MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
-							MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9
-							MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9
-							MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9
-							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9
-						>;
-					};
-
-
-				};
-
-				usdhc2 {
-					pinctrl_usdhc2_1: usdhc2grp-1 {
-						fsl,pins = <
-							MX6SL_PAD_SD2_CMD__SD2_CMD    0x17059
-							MX6SL_PAD_SD2_CLK__SD2_CLK    0x10059
-							MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-							MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-							MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-						>;
-					};
-
-					pinctrl_usdhc2_1_100mhz: usdhc2grp-1-100mhz {
-						fsl,pins = <
-							MX6SL_PAD_SD2_CMD__SD2_CMD    0x170b9
-							MX6SL_PAD_SD2_CLK__SD2_CLK    0x100b9
-							MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
-							MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
-							MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
-							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
-						>;
-					};
-
-					pinctrl_usdhc2_1_200mhz: usdhc2grp-1-200mhz {
-						fsl,pins = <
-							MX6SL_PAD_SD2_CMD__SD2_CMD    0x170f9
-							MX6SL_PAD_SD2_CLK__SD2_CLK    0x100f9
-							MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
-							MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
-							MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
-							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
-						>;
-					};
-
-				};
-
-				usdhc3 {
-					pinctrl_usdhc3_1: usdhc3grp-1 {
-						fsl,pins = <
-							MX6SL_PAD_SD3_CMD__SD3_CMD    0x17059
-							MX6SL_PAD_SD3_CLK__SD3_CLK    0x10059
-							MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-							MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-							MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-						>;
-					};
-
-					pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz {
-						fsl,pins = <
-							MX6SL_PAD_SD3_CMD__SD3_CMD    0x170b9
-							MX6SL_PAD_SD3_CLK__SD3_CLK    0x100b9
-							MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
-							MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
-							MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
-							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
-						>;
-					};
-
-					pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz {
-						fsl,pins = <
-							MX6SL_PAD_SD3_CMD__SD3_CMD    0x170f9
-							MX6SL_PAD_SD3_CLK__SD3_CLK    0x100f9
-							MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
-							MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
-							MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
-							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
-						>;
-					};
-				};
 			};
 
 			csi: csi@020e4000 {
 				reg = <0x020e4000 0x4000>;
-				interrupts = <0 7 0x04>;
+				interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			spdc: spdc@020e8000 {
 				reg = <0x020e8000 0x4000>;
-				interrupts = <0 6 0x04>;
+				interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sdma: sdma@020ec000 {
 				compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
-				interrupts = <0 2 0x04>;
+				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_SDMA>,
 					 <&clks IMX6SL_CLK_SDMA>;
 				clock-names = "ipg", "ahb";
@@ -782,22 +620,22 @@
 
 			pxp: pxp@020f0000 {
 				reg = <0x020f0000 0x4000>;
-				interrupts = <0 98 0x04>;
+				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			epdc: epdc@020f4000 {
 				reg = <0x020f4000 0x4000>;
-				interrupts = <0 97 0x04>;
+				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			lcdif: lcdif@020f8000 {
 				reg = <0x020f8000 0x4000>;
-				interrupts = <0 39 0x04>;
+				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			dcp: dcp@020fc000 {
 				reg = <0x020fc000 0x4000>;
-				interrupts = <0 99 0x04>;
+				interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -811,7 +649,7 @@
 			usbotg1: usb@02184000 {
 				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
-				interrupts = <0 43 0x04>;
+				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
@@ -821,7 +659,7 @@
 			usbotg2: usb@02184200 {
 				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
-				interrupts = <0 42 0x04>;
+				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
@@ -831,7 +669,7 @@
 			usbh: usb@02184400 {
 				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
-				interrupts = <0 40 0x04>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
@@ -847,7 +685,7 @@
 			fec: ethernet@02188000 {
 				compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
 				reg = <0x02188000 0x4000>;
-				interrupts = <0 114 0x04>;
+				interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_ENET_REF>,
 					 <&clks IMX6SL_CLK_ENET_REF>;
 				clock-names = "ipg", "ahb";
@@ -857,7 +695,7 @@
 			usdhc1: usdhc@02190000 {
 				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
-				interrupts = <0 22 0x04>;
+				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USDHC1>,
 					 <&clks IMX6SL_CLK_USDHC1>,
 					 <&clks IMX6SL_CLK_USDHC1>;
@@ -869,7 +707,7 @@
 			usdhc2: usdhc@02194000 {
 				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
-				interrupts = <0 23 0x04>;
+				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USDHC2>,
 					 <&clks IMX6SL_CLK_USDHC2>,
 					 <&clks IMX6SL_CLK_USDHC2>;
@@ -881,7 +719,7 @@
 			usdhc3: usdhc@02198000 {
 				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
-				interrupts = <0 24 0x04>;
+				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USDHC3>,
 					 <&clks IMX6SL_CLK_USDHC3>,
 					 <&clks IMX6SL_CLK_USDHC3>;
@@ -893,7 +731,7 @@
 			usdhc4: usdhc@0219c000 {
 				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
-				interrupts = <0 25 0x04>;
+				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USDHC4>,
 					 <&clks IMX6SL_CLK_USDHC4>,
 					 <&clks IMX6SL_CLK_USDHC4>;
@@ -907,7 +745,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
 				reg = <0x021a0000 0x4000>;
-				interrupts = <0 36 0x04>;
+				interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_I2C1>;
 				status = "disabled";
 			};
@@ -917,7 +755,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
 				reg = <0x021a4000 0x4000>;
-				interrupts = <0 37 0x04>;
+				interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_I2C2>;
 				status = "disabled";
 			};
@@ -927,7 +765,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
 				reg = <0x021a8000 0x4000>;
-				interrupts = <0 38 0x04>;
+				interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_I2C3>;
 				status = "disabled";
 			};
@@ -939,12 +777,12 @@
 
 			rngb: rngb@021b4000 {
 				reg = <0x021b4000 0x4000>;
-				interrupts = <0 5 0x04>;
+				interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			weim: weim@021b8000 {
 				reg = <0x021b8000 0x4000>;
-				interrupts = <0 14 0x04>;
+				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			ocotp: ocotp@021bc000 {
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index e6be9315ff0a..b10e6351da53 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -18,6 +18,28 @@
 		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
 	};
 
+	/* 24 MHz chrystal on the core module */
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* The UART clock is 14.74 MHz divided by an ICS525 */
+	uartclk: uartclk@14.74M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <14745600>;
+	};
+
 	syscon {
 		compatible = "arm,integrator-ap-syscon";
 		reg = <0x11000000 0x100>;
@@ -28,14 +50,17 @@
 
 	timer0: timer@13000000 {
 		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
 	};
 
 	timer1: timer@13000100 {
 		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
 	};
 
 	timer2: timer@13000200 {
 		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
 	};
 
 	pic: pic@14000000 {
@@ -92,26 +117,36 @@
 		rtc: rtc@15000000 {
 			compatible = "arm,pl030", "arm,primecell";
 			arm,primecell-periphid = <0x00041030>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		uart0: uart@16000000 {
 			compatible = "arm,pl010", "arm,primecell";
 			arm,primecell-periphid = <0x00041010>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		uart1: uart@17000000 {
 			compatible = "arm,pl010", "arm,primecell";
 			arm,primecell-periphid = <0x00041010>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		kmi0: kmi@18000000 {
 			compatible = "arm,pl050", "arm,primecell";
 			arm,primecell-periphid = <0x00041050>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
 		};
 
 		kmi1: kmi@19000000 {
 			compatible = "arm,pl050", "arm,primecell";
 			arm,primecell-periphid = <0x00041050>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index a21c17de9a5e..d43f15b4f79a 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -13,25 +13,107 @@
 		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
 	};
 
+	/*
+	 * The Integrator/CP overall clocking architecture can be found in
+	 * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
+	 * appear to illustrate the layout used in most configurations.
+	 */
+
+	/* The codec chrystal operates at 24.576 MHz */
+	xtal_codec: xtal24.576@24.576M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
+	aaci_bitclk: aaci_bitclk@12.288M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&xtal_codec>;
+	};
+
+	/* This is a 25MHz chrystal on the base board */
+	xtal25mhz: xtal25mhz@25M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
+	uartclk: uartclk@14.74M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <14745600>;
+	};
+
+	/* Actually sysclk I think */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	core-module@10000000 {
+		/* 24 MHz chrystal on the core module */
+		xtal24mhz: xtal24mhz@24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		/*
+		 * External oscillator on the core module, usually used
+		 * to drive video circuitry. Driven from the 24MHz clock.
+		 */
+		auxosc: cm_aux_osc@25M {
+			#clock-cells = <0>;
+			compatible = "arm,integrator-cm-auxosc";
+			clocks = <&xtal24mhz>;
+		};
+
+		/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
+		kmiclk: kmiclk@1M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <3>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+
+		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
+		timclk: timclk@1M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <24>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+	};
+
 	syscon {
 		compatible = "arm,integrator-cp-syscon";
 		reg = <0xcb000000 0x100>;
 	};
 
 	timer0: timer@13000000 {
-		/* TIMER0 runs @ 25MHz */
+		/* TIMER0 runs directly on the 25MHz chrystal */
 		compatible = "arm,integrator-cp-timer";
-		status = "disabled";
+		clocks = <&xtal25mhz>;
 	};
 
 	timer1: timer@13000100 {
 		/* TIMER1 runs @ 1MHz */
 		compatible = "arm,integrator-cp-timer";
+		clocks = <&timclk>;
 	};
 
 	timer2: timer@13000200 {
 		/* TIMER2 runs @ 1MHz */
 		compatible = "arm,integrator-cp-timer";
+		clocks = <&timclk>;
 	};
 
 	pic: pic@14000000 {
@@ -74,22 +156,32 @@
 		 */
 		rtc@15000000 {
 			compatible = "arm,pl031", "arm,primecell";
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		uart@16000000 {
 			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		uart@17000000 {
 			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		kmi@18000000 {
 			compatible = "arm,pl050", "arm,primecell";
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
 		};
 
 		kmi@19000000 {
 			compatible = "arm,pl050", "arm,primecell";
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
 		};
 
 		/*
@@ -100,18 +192,24 @@
 			reg = <0x1c000000 0x1000>;
 			interrupts = <23 24>;
 			max-frequency = <515633>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
 		};
 
 		aaci@1d000000 {
 			compatible = "arm,pl041", "arm,primecell";
 			reg = <0x1d000000 0x1000>;
 			interrupts = <25>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		clcd@c0000000 {
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0xC0000000 0x1000>;
 			interrupts = <22>;
+			clocks = <&auxosc>, <&pclk>;
+			clock-names = "clcd", "apb_pclk";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi
new file mode 100644
index 000000000000..90774d604bc1
--- /dev/null
+++ b/arch/arm/boot/dts/k2e-clocks.dtsi
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison SoC specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkpass>;
+		clock-output-names = "pa-pll-clk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3a>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	clkusb1: clkusb1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb";
+		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkhyperlink0: clkhyperlink0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-0";
+		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <5>;
+	};
+
+	clkpcie1: clkpcie1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie";
+		reg = <0x0235006c 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkxge: clkxge {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "xge";
+		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+};
diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts
new file mode 100644
index 000000000000..c568f067604d
--- /dev/null
+++ b/arch/arm/boot/dts/k2e-evm.dts
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "k2e.dtsi"
+
+/ {
+	compatible =  "ti,k2e-evm","ti,keystone";
+	model = "Texas Instruments Keystone 2 Edison EVM";
+
+	soc {
+
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-sys";
+			};
+
+			refclkpass: refclkpass {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-pass";
+			};
+
+			refclkddr3a: refclkddr3a {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3a";
+			};
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "at,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x1FE80000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
new file mode 100644
index 000000000000..03d01909525b
--- /dev/null
+++ b/arch/arm/boot/dts/k2e.dtsi
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison soc device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	soc {
+		/include/ "k2e-clocks.dtsi"
+
+		usb: usb@2680000 {
+			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			dwc3@2690000 {
+				interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		usb1_phy: usb_phy@2620750 {
+			compatible = "ti,keystone-usbphy";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2620750 24>;
+			status = "disabled";
+		};
+
+		usb1: usb@25000000 {
+			compatible = "ti,keystone-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x25000000 0x10000>;
+			clocks = <&clkusb1>;
+			clock-names = "usb";
+			interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+			ranges;
+			status = "disabled";
+
+			dwc3@25010000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x25010000 0x70000>;
+				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+				usb-phy = <&usb1_phy>, <&usb1_phy>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/k2hk-clocks.dtsi
new file mode 100644
index 000000000000..96e65365afe3
--- /dev/null
+++ b/arch/arm/boot/dts/k2hk-clocks.dtsi
@@ -0,0 +1,426 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking SoC clock nodes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	armpllclk: armpllclk@2620370 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkarm>;
+		clock-output-names = "arm-pll-clk";
+		reg = <0x02620370 4>;
+		reg-names = "control";
+	};
+
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkpass>;
+		clock-output-names = "pa-pll-clk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3a>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	ddr3bpllclk: ddr3bpllclk@2620368 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3b>;
+		clock-output-names = "ddr-3b-pll-clk";
+		reg = <0x02620368 4>;
+		reg-names = "control";
+	};
+
+	clktsip: clktsip {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "tsip";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clksrio: clksrio {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso13>;
+		clock-output-names = "srio";
+		reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <4>;
+	};
+
+	clkhyperlink0: clkhyperlink0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-0";
+		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <5>;
+	};
+
+	clkgem1: clkgem1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem1";
+		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <9>;
+	};
+
+	clkgem2: clkgem2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem2";
+		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <10>;
+	};
+
+	clkgem3: clkgem3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem3";
+		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <11>;
+	};
+
+	clkgem4: clkgem4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem4";
+		reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <12>;
+	};
+
+	clkgem5: clkgem5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem5";
+		reg = <0x02350050 0xb00>, <0x02350034 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <13>;
+	};
+
+	clkgem6: clkgem6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem6";
+		reg = <0x02350054 0xb00>, <0x02350038 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <14>;
+	};
+
+	clkgem7: clkgem7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem7";
+		reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <15>;
+	};
+
+	clkddr31: clkddr31 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "ddr3-1";
+		reg = <0x02350060 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clktac: clktac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tac";
+		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac01: clkrac01 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-01";
+		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac23: clkrac23 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-23";
+		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkfftc0: clkfftc0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-0";
+		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc1: clkfftc1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-1";
+		reg = <0x02350074 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc2: clkfftc2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-2";
+		reg = <0x02350078 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc3: clkfftc3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-3";
+		reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc4: clkfftc4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-4";
+		reg = <0x02350080 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc5: clkfftc5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-5";
+		reg = <0x02350084 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkaif: clkaif {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "aif";
+		reg = <0x02350088 0xb00>, <0x02350054 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <21>;
+	};
+
+	clktcp3d0: clktcp3d0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-0";
+		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d1: clktcp3d1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-1";
+		reg = <0x02350090 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d2: clktcp3d2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-2";
+		reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clktcp3d3: clktcp3d3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-3";
+		reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clkvcp0: clkvcp0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-0";
+		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp1: clkvcp1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-1";
+		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp2: clkvcp2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-2";
+		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp3: clkvcp3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-3";
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp4: clkvcp4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-4";
+		reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp5: clkvcp5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-5";
+		reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp6: clkvcp6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-6";
+		reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp7: clkvcp7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-7";
+		reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkbcp: clkbcp {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "bcp";
+		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <26>;
+	};
+
+	clkdxb: clkdxb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dxb";
+		reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <27>;
+	};
+
+	clkhyperlink1: clkhyperlink1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-1";
+		reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <28>;
+	};
+
+	clkxge: clkxge {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "xge";
+		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+};
diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts
index eaefdfef65c3..1f90cbf27fd7 100644
--- a/arch/arm/boot/dts/k2hk-evm.dts
+++ b/arch/arm/boot/dts/k2hk-evm.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright 2013 Texas Instruments, Inc.
+ * Copyright 2013-2014 Texas Instruments, Inc.
  *
  * Keystone 2 Kepler/Hawking EVM device tree
  *
@@ -10,12 +10,14 @@
 /dts-v1/;
 
 #include "keystone.dtsi"
+#include "k2hk.dtsi"
 
 / {
-	compatible =  "ti,keystone-evm";
+	compatible =  "ti,k2hk-evm","ti,keystone";
+	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
 
 	soc {
-		clock {
+		clocks {
 			refclksys: refclksys {
 				#clock-cells = <0>;
 				compatible = "fixed-clock";
@@ -52,6 +54,29 @@
 			};
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		debug1_1 {
+			label = "keystone:green:debug1";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+		};
+
+		debug1_2 {
+			label = "keystone:red:debug1";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+		};
+
+		debug2 {
+			label = "keystone:blue:debug2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+		};
+
+		debug3 {
+			label = "keystone:blue:debug3";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+		};
+	};
 };
 
 &usb_phy {
@@ -61,3 +86,84 @@
 &usb {
 	status = "okay";
 };
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x1fe80000>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "at,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&spi0 {
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi
new file mode 100644
index 000000000000..c73899c73118
--- /dev/null
+++ b/arch/arm/boot/dts/k2hk.dtsi
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking soc specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	soc {
+		/include/ "k2hk-clocks.dtsi"
+	};
+};
diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/k2l-clocks.dtsi
new file mode 100644
index 000000000000..f584b80200f8
--- /dev/null
+++ b/arch/arm/boot/dts/k2l-clocks.dtsi
@@ -0,0 +1,267 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 lamarr SoC clock nodes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	armpllclk: armpllclk@2620370 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "arm-pll-clk";
+		reg = <0x02620370 4>;
+		reg-names = "control";
+	};
+
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "pa-pll-clk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	clkdfeiqnsys: clkdfeiqnsys {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "dfe";
+		reg-names = "control", "domain";
+		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+		domain-id = <0>;
+	};
+
+	clkpcie1: clkpcie1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie";
+		reg = <0x0235002c 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <4>;
+	};
+
+	clkgem1: clkgem1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem1";
+		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <9>;
+	};
+
+	clkgem2: clkgem2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem2";
+		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <10>;
+	};
+
+	clkgem3: clkgem3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem3";
+		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <11>;
+	};
+
+	clktac: clktac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tac";
+		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac: clkrac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac";
+		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkdfepd0: clkdfepd0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dfe-pd0";
+		reg = <0x0235006c 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkfftc0: clkfftc0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-0";
+		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkosr: clkosr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "osr";
+		reg = <0x02350088 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <21>;
+	};
+
+	clktcp3d0: clktcp3d0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-0";
+		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d1: clktcp3d1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-1";
+		reg = <0x02350094 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clkvcp0: clkvcp0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-0";
+		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp1: clkvcp1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-1";
+		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp2: clkvcp2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-2";
+		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp3: clkvcp3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-3";
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkbcp: clkbcp {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "bcp";
+		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <26>;
+	};
+
+	clkdfepd1: clkdfepd1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dfe-pd1";
+		reg = <0x023500c0 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <27>;
+	};
+
+	clkfftc1: clkfftc1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-1";
+		reg = <0x023500c4 0xb00>, <0x023504c0 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <28>;
+	};
+
+	clkiqnail: clkiqnail {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "iqn-ail";
+		reg = <0x023500c8 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+
+	clkuart2: clkuart2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart2";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart3: clkuart3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart3";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts
new file mode 100644
index 000000000000..fec43128a2e0
--- /dev/null
+++ b/arch/arm/boot/dts/k2l-evm.dts
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Lamarr EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "k2l.dtsi"
+
+/ {
+	compatible =  "ti,k2l-evm","ti,keystone";
+	model = "Texas Instruments Keystone 2 Lamarr EVM";
+
+	soc {
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <122880000>;
+				clock-output-names = "refclk-sys";
+			};
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "at,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x7FE80000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi
new file mode 100644
index 000000000000..1f7f479589e1
--- /dev/null
+++ b/arch/arm/boot/dts/k2l.dtsi
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Lamarr SoC specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	soc {
+
+		/include/ "k2l-clocks.dtsi"
+
+		uart2: serial@02348400 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02348400 0x100>;
+			clocks	= <&clkuart2>;
+			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		uart3:	serial@02348800 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02348800 0x100>;
+			clocks	= <&clkuart3>;
+			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
index ef58d1c24313..93f82c7010ab 100644
--- a/arch/arm/boot/dts/keystone-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi
@@ -13,51 +13,6 @@ clocks {
 	#size-cells = <1>;
 	ranges;
 
-	mainpllclk: mainpllclk@2310110 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
-		reg-names = "control", "multiplier";
-		fixed-postdiv = <2>;
-	};
-
-	papllclk: papllclk@2620358 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkpass>;
-		clock-output-names = "pa-pll-clk";
-		reg = <0x02620358 4>;
-		reg-names = "control";
-	};
-
-	ddr3apllclk: ddr3apllclk@2620360 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkddr3a>;
-		clock-output-names = "ddr-3a-pll-clk";
-		reg = <0x02620360 4>;
-		reg-names = "control";
-	};
-
-	ddr3bpllclk: ddr3bpllclk@2620368 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkddr3b>;
-		clock-output-names = "ddr-3b-pll-clk";
-		reg = <0x02620368 4>;
-		reg-names = "control";
-	};
-
-	armpllclk: armpllclk@2620370 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkarm>;
-		clock-output-names = "arm-pll-clk";
-		reg = <0x02620370 4>;
-		reg-names = "control";
-	};
-
 	mainmuxclk: mainmuxclk@2310108 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,pll-mux-clock";
@@ -244,7 +199,7 @@ clocks {
 		clock-output-names = "debugss-trc";
 		reg = <0x02350014 0xb00>, <0x02350000 0x400>;
 		reg-names = "control", "domain";
-		domain-id = <0>;
+		domain-id = <1>;
 	};
 
 	clktetbtrc: clktetbtrc {
@@ -297,26 +252,6 @@ clocks {
 		domain-id = <3>;
 	};
 
-	clksrio: clksrio {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1rstiso13>;
-		clock-output-names = "srio";
-		reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <4>;
-	};
-
-	clkhyperlink0: clkhyperlink0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "hyperlink-0";
-		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <5>;
-	};
-
 	clksr: clksr {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
@@ -327,16 +262,6 @@ clocks {
 		domain-id = <6>;
 	};
 
-	clkmsmcsram: clkmsmcsram {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "msmcsram";
-		reg = <0x02350038 0xb00>, <0x0235001c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <7>;
-	};
-
 	clkgem0: clkgem0 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
@@ -347,76 +272,6 @@ clocks {
 		domain-id = <8>;
 	};
 
-	clkgem1: clkgem1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem1";
-		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <9>;
-	};
-
-	clkgem2: clkgem2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem2";
-		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <10>;
-	};
-
-	clkgem3: clkgem3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem3";
-		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <11>;
-	};
-
-	clkgem4: clkgem4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem4";
-		reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <12>;
-	};
-
-	clkgem5: clkgem5 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem5";
-		reg = <0x02350050 0xb00>, <0x02350034 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <13>;
-	};
-
-	clkgem6: clkgem6 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem6";
-		reg = <0x02350054 0xb00>, <0x02350038 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <14>;
-	};
-
-	clkgem7: clkgem7 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem7";
-		reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <15>;
-	};
-
 	clkddr30: clkddr30 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
@@ -427,276 +282,6 @@ clocks {
 		domain-id = <16>;
 	};
 
-	clkddr31: clkddr31 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "ddr3-1";
-		reg = <0x02350060 0xb00>, <0x02350040 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <16>;
-	};
-
-	clktac: clktac {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tac";
-		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkrac01: clktac01 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "rac-01";
-		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkrac23: clktac23 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "rac-23";
-		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <18>;
-	};
-
-	clkfftc0: clkfftc0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-0";
-		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <19>;
-	};
-
-	clkfftc1: clkfftc1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-1";
-		reg = <0x02350074 0xb00>, <0x023504c0 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <19>;
-	};
-
-	clkfftc2: clkfftc2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-2";
-		reg = <0x02350078 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkfftc3: clkfftc3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-3";
-		reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkfftc4: clkfftc4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-4";
-		reg = <0x02350080 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkfftc5: clkfftc5 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-5";
-		reg = <0x02350084 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkaif: clkaif {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "aif";
-		reg = <0x02350088 0xb00>, <0x02350054 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <21>;
-	};
-
-	clktcp3d0: clktcp3d0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-0";
-		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <22>;
-	};
-
-	clktcp3d1: clktcp3d1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-1";
-		reg = <0x02350090 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <22>;
-	};
-
-	clktcp3d2: clktcp3d2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-2";
-		reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <23>;
-	};
-
-	clktcp3d3: clktcp3d3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-3";
-		reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <23>;
-	};
-
-	clkvcp0: clkvcp0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-0";
-		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp1: clkvcp1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-1";
-		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp2: clkvcp2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-2";
-		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp3: clkvcp3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-3";
-		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp4: clkvcp4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-4";
-		reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkvcp5: clkvcp5 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-5";
-		reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkvcp6: clkvcp6 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-6";
-		reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkvcp7: clkvcp7 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-7";
-		reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkbcp: clkbcp {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "bcp";
-		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <26>;
-	};
-
-	clkdxb: clkdxb {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "dxb";
-		reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <27>;
-	};
-
-	clkhyperlink1: clkhyperlink1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "hyperlink-1";
-		reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <28>;
-	};
-
-	clkxge: clkxge {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "xge";
-		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <29>;
-	};
-
 	clkwdtimer0: clkwdtimer0 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
@@ -737,6 +322,16 @@ clocks {
 		domain-id = <0>;
 	};
 
+	clktimer15: clktimer15 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer15";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
 	clkuart0: clkuart0 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index b4202907a27b..d9f99e7deb83 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
 
 #include "skeleton.dtsi"
 
@@ -24,42 +25,9 @@
 		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gic>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <3>;
-		};
-	};
-
 	gic: interrupt-controller {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
-		#size-cells = <0>;
-		#address-cells = <1>;
 		interrupt-controller;
 		reg = <0x0 0x02561000 0x0 0x1000>,
 		      <0x0 0x02562000 0x0 0x2000>,
@@ -96,6 +64,7 @@
 		compatible = "ti,keystone","simple-bus";
 		interrupt-parent = <&gic>;
 		ranges = <0x0 0x0 0x0 0xc0000000>;
+		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
 
 		rstctrl: reset-controller {
 			compatible = "ti,keystone-reset";
@@ -132,11 +101,6 @@
 			interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-
-			dtt@50 {
-				compatible = "at,24c1024";
-				reg = <0x50>;
-			};
 		};
 
 		i2c1: i2c@2530400 {
@@ -145,6 +109,8 @@
 			clock-frequency = <100000>;
 			clocks = <&clki2c>;
 			interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c2: i2c@2530800 {
@@ -153,6 +119,8 @@
 			clock-frequency = <100000>;
 			clocks = <&clki2c>;
 			interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		spi0: spi@21000400 {
@@ -162,6 +130,8 @@
 			ti,davinci-spi-intr-line = <0>;
 			interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&clkspi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		spi1: spi@21000600 {
@@ -171,6 +141,8 @@
 			ti,davinci-spi-intr-line = <0>;
 			interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&clkspi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		spi2: spi@21000800 {
@@ -180,6 +152,8 @@
 			ti,davinci-spi-intr-line = <0>;
 			interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&clkspi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		usb_phy: usb_phy@2620738 {
@@ -199,6 +173,8 @@
 			clock-names = "usb";
 			interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
 			ranges;
+			dma-coherent;
+			dma-ranges;
 			status = "disabled";
 
 			dwc3@2690000 {
@@ -208,5 +184,75 @@
 				usb-phy = <&usb_phy>, <&usb_phy>;
 			};
 		};
+
+		wdt: wdt@022f0080 {
+			compatible = "ti,keystone-wdt","ti,davinci-wdt";
+			reg = <0x022f0080 0x80>;
+			clocks = <&clkwdtimer0>;
+		};
+
+		clock_event: timer@22f0000 {
+			compatible = "ti,keystone-timer";
+			reg = <0x022f0000 0x80>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clktimer15>;
+		};
+
+		gpio0: gpio@260bf00 {
+			compatible = "ti,keystone-gpio";
+			reg = <0x0260bf00 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* HW Interrupts mapped to GPIO pins */
+			interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkgpio>;
+			clock-names = "gpio";
+			ti,ngpio = <32>;
+			ti,davinci-gpio-unbanked = <32>;
+		};
+
+		aemif: aemif@21000A00 {
+			compatible = "ti,keystone-aemif", "ti,davinci-aemif";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			clocks = <&clkaemif>;
+			clock-names = "aemif";
+			clock-ranges;
+
+			reg = <0x21000A00 0x00000100>;
+			ranges = <0 0 0x30000000 0x10000000
+				  1 0 0x21000A00 0x00000100>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi
index 3916937d6818..dd81508b919b 100644
--- a/arch/arm/boot/dts/kirkwood-6192.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6192.dtsi
@@ -1,6 +1,6 @@
 / {
 	mbus {
-		pcie-controller {
+		pciec: pcie-controller {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -15,7 +15,7 @@
 				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
 				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
 
-			pcie@1,0 {
+			pcie0: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -35,16 +35,9 @@
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			compatible = "marvell,88f6192-pinctrl";
-			reg = <0x10000 0x20>;
 
-			pmx_nand: pmx-nand {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-					       "mpp4", "mpp5", "mpp18",
-					       "mpp19";
-				marvell,function = "nand";
-			};
 			pmx_sata0: pmx-sata0 {
 				marvell,pins = "mpp5", "mpp21", "mpp23";
 				marvell,function = "sata0";
@@ -53,22 +46,6 @@
 				marvell,pins = "mpp4", "mpp20", "mpp22";
 				marvell,function = "sata1";
 			};
-			pmx_spi: pmx-spi {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
-				marvell,function = "spi";
-			};
-			pmx_twsi0: pmx-twsi0 {
-				marvell,pins = "mpp8", "mpp9";
-				marvell,function = "twsi0";
-			};
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11";
-				marvell,function = "uart0";
-			};
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14";
-				marvell,function = "uart1";
-			};
 			pmx_sdio: pmx-sdio {
 				marvell,pins = "mpp12", "mpp13", "mpp14",
 					       "mpp15", "mpp16", "mpp17";
@@ -76,14 +53,14 @@
 			};
 		};
 
-		rtc@10300 {
+		rtc: rtc@10300 {
 			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
 			reg = <0x10300 0x20>;
 			interrupts = <53>;
 			clocks = <&gate_clk 7>;
 		};
 
-		sata@80000 {
+		sata: sata@80000 {
 			compatible = "marvell,orion-sata";
 			reg = <0x80000 0x5000>;
 			interrupts = <21>;
@@ -92,7 +69,7 @@
 			status = "disabled";
 		};
 
-		mvsdio@90000 {
+		sdio: mvsdio@90000 {
 			compatible = "marvell,orion-sdio";
 			reg = <0x90000 0x200>;
 			interrupts = <28>;
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index 416d96e1302f..7dc7d6782e83 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -1,6 +1,6 @@
 / {
 	mbus {
-		pcie-controller {
+		pciec: pcie-controller {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -15,7 +15,7 @@
 				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
 				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
 
-			pcie@1,0 {
+			pcie0: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -35,16 +35,9 @@
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			compatible = "marvell,88f6281-pinctrl";
-			reg = <0x10000 0x20>;
 
-			pmx_nand: pmx-nand {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-					       "mpp4", "mpp5", "mpp18",
-					       "mpp19";
-				marvell,function = "nand";
-			};
 			pmx_sata0: pmx-sata0 {
 				marvell,pins = "mpp5", "mpp21", "mpp23";
 				marvell,function = "sata0";
@@ -53,22 +46,6 @@
 				marvell,pins = "mpp4", "mpp20", "mpp22";
 				marvell,function = "sata1";
 			};
-			pmx_spi: pmx-spi {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
-				marvell,function = "spi";
-			};
-			pmx_twsi0: pmx-twsi0 {
-				marvell,pins = "mpp8", "mpp9";
-				marvell,function = "twsi0";
-			};
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11";
-				marvell,function = "uart0";
-			};
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14";
-				marvell,function = "uart1";
-			};
 			pmx_sdio: pmx-sdio {
 				marvell,pins = "mpp12", "mpp13", "mpp14",
 					       "mpp15", "mpp16", "mpp17";
@@ -76,14 +53,14 @@
 			};
 		};
 
-		rtc@10300 {
+		rtc: rtc@10300 {
 			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
 			reg = <0x10300 0x20>;
 			interrupts = <53>;
 			clocks = <&gate_clk 7>;
 		};
 
-		sata@80000 {
+		sata: sata@80000 {
 			compatible = "marvell,orion-sata";
 			reg = <0x80000 0x5000>;
 			interrupts = <21>;
@@ -94,7 +71,7 @@
 			status = "disabled";
 		};
 
-		mvsdio@90000 {
+		sdio: mvsdio@90000 {
 			compatible = "marvell,orion-sdio";
 			reg = <0x90000 0x200>;
 			interrupts = <28>;
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 2902e0d7971d..4680eec990f0 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -1,6 +1,6 @@
 / {
 	mbus {
-		pcie-controller {
+		pciec: pcie-controller {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -19,7 +19,7 @@
 				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
 				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
 
-			pcie@1,0 {
+			pcie0: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -36,7 +36,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie1: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -56,15 +56,8 @@
 	};
 	ocp@f1000000 {
 
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			compatible = "marvell,88f6282-pinctrl";
-			reg = <0x10000 0x20>;
-
-			pmx_nand: pmx-nand {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-							"mpp4", "mpp5", "mpp18", "mpp19";
-				marvell,function = "nand";
-			};
 
 			pmx_sata0: pmx-sata0 {
 				marvell,pins = "mpp5", "mpp21", "mpp23";
@@ -74,29 +67,16 @@
 				marvell,pins = "mpp4", "mpp20", "mpp22";
 				marvell,function = "sata1";
 			};
-			pmx_spi: pmx-spi {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
-				marvell,function = "spi";
-			};
-			pmx_twsi0: pmx-twsi0 {
-				marvell,pins = "mpp8", "mpp9";
-				marvell,function = "twsi0";
-			};
 
+			/*
+			 * Default I2C1 pinctrl setting on mpp36/mpp37,
+			 * overwrite marvell,pins on board level if required.
+			 */
 			pmx_twsi1: pmx-twsi1 {
 				marvell,pins = "mpp36", "mpp37";
 				marvell,function = "twsi1";
 			};
 
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11";
-				marvell,function = "uart0";
-			};
-
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14";
-				marvell,function = "uart1";
-			};
 			pmx_sdio: pmx-sdio {
 				marvell,pins = "mpp12", "mpp13", "mpp14",
 					       "mpp15", "mpp16", "mpp17";
@@ -104,20 +84,20 @@
 			};
 		};
 
-		thermal@10078 {
+		thermal: thermal@10078 {
 			compatible = "marvell,kirkwood-thermal";
 			reg = <0x10078 0x4>;
 			status = "okay";
 		};
 
-		rtc@10300 {
+		rtc: rtc@10300 {
 			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
 			reg = <0x10300 0x20>;
 			interrupts = <53>;
 			clocks = <&gate_clk 7>;
 		};
 
-		i2c@11100 {
+		i2c1: i2c@11100 {
 			compatible = "marvell,mv64xxx-i2c";
 			reg = <0x11100 0x20>;
 			#address-cells = <1>;
@@ -125,10 +105,12 @@
 			interrupts = <32>;
 			clock-frequency = <100000>;
 			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_twsi1>;
+			pinctrl-names = "default";
 			status = "disabled";
 		};
 
-		sata@80000 {
+		sata: sata@80000 {
 			compatible = "marvell,orion-sata";
 			reg = <0x80000 0x5000>;
 			interrupts = <21>;
@@ -139,7 +121,7 @@
 			status = "disabled";
 		};
 
-		mvsdio@90000 {
+		sdio: mvsdio@90000 {
 			compatible = "marvell,orion-sdio";
 			reg = <0x90000 0x200>;
 			interrupts = <28>;
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
index 3271e4c8ea07..9e1f741d74ff 100644
--- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
+++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
@@ -1,31 +1,51 @@
 / {
+	mbus {
+		pciec: pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
+	};
+
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			compatible = "marvell,98dx4122-pinctrl";
-			reg = <0x10000 0x20>;
 
-			pmx_nand: pmx-nand {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-					       "mpp4", "mpp5", "mpp18",
-					       "mpp19";
-				marvell,function = "nand";
-			};
-			pmx_spi: pmx-spi {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
-				marvell,function = "spi";
-			};
-			pmx_twsi0: pmx-twsi0 {
-				marvell,pins = "mpp8", "mpp9";
-				marvell,function = "twsi0";
-			};
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11";
-				marvell,function = "uart0";
-			};
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14";
-				marvell,function = "uart1";
-			};
 		};
 	};
 };
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts
new file mode 100644
index 000000000000..c9247f8672ae
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-b3.dts
@@ -0,0 +1,201 @@
+/*
+ * Device Tree file for Excito Bubba B3
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Note: This requires a new'ish version of u-boot, which disables the
+ * L2 cache. If your B3 silently fails to boot, u-boot is probably too
+ * old. Either upgrade, or consider the following email:
+ *
+ * http://lists.debian.org/debian-arm/2012/08/msg00128.html
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Excito B3";
+	compatible = "excito,b3", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+	memory { /* 512 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			/* Wifi model has Atheros chipset on pcie port */
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led-green {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_red: pmx-led-red {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_blue: pmx-led-blue {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_beeper: pmx-beeper {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p16@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p16";
+				reg = <0>;
+				spi-max-frequency = <40000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0xc0000>;
+					label = "u-boot";
+				};
+
+				partition@c0000 {
+					reg = <0xc0000 0x20000>;
+					label = "u-boot env";
+				};
+
+				partition@e0000 {
+					reg = <0xe0000 0x120000>;
+					label = "data";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+			/*
+			 * There is something on the bus at address 0x64.
+			 * Not yet identified what it is, maybe the eeprom
+			 * for the Atheros WiFi chip?
+			 */
+		};
+
+
+		serial@12000 {
+			/* Internal on test pins, 3.3v TTL
+		 	 * UART0_RX = Testpoint 65
+			 * UART0_TX = Testpoint 66
+			 * See the Excito Wiki for more details.
+		 	 */
+			status = "okay";
+		};
+
+		sata@80000 {
+			/* One internal, the second as eSATA */
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-leds {
+		/*
+		 * There is one LED "port" on the front and the colours
+		 * mix together giving some interesting combinations.
+		 */
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_green &pmx_led_red
+			      &pmx_led_blue >;
+		pinctrl-names = "default";
+
+		programming_led {
+			label = "bubba3:green:programming";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		error_led {
+			label = "bubba3:red:error";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		active_led {
+			label = "bubba3:blue:active";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_power>;
+		pinctrl-names = "default";
+
+		power-button {
+			/* On the back */
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	beeper: beeper {
+		/* 4KHz Piezoelectric buzzer */
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pmx_beeper>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@24 {
+		device_type = "ethernet-phy";
+		reg = <24>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
index 0e06fd3cee4d..ab6ab4933e6b 100644
--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts
@@ -14,10 +14,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
 				marvell,pins = "mpp15";
 				marvell,function = "sata0";
@@ -25,9 +26,6 @@
 		};
 
 		serial@12000 {
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
-			clock-frequency = <166666667>;
 			status = "okay";
 		};
 
@@ -39,14 +37,12 @@
 		};
 
 		spi@10600 {
-			pinctrl-0 = <&pmx_spi>;
-			pinctrl-names = "default";
 			status = "okay";
 
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mx25l4005a";
+				compatible = "mxicy,mx25l4005a";
 				reg = <0>;
 				spi-max-frequency = <20000000>;
 				mode = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi
index 02d1225ef99f..812df691ae3d 100644
--- a/arch/arm/boot/dts/kirkwood-db.dtsi
+++ b/arch/arm/boot/dts/kirkwood-db.dtsi
@@ -22,10 +22,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl@10000 {
+		pin-controller@10000 {
 			pmx_sdio_gpios: pmx-sdio-gpios {
 				marvell,pins = "mpp37", "mpp38";
 				marvell,function = "gpio";
@@ -33,10 +34,7 @@
 		};
 
 		serial@12000 {
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
-			clock-frequency = <200000000>;
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@80000 {
@@ -59,8 +57,6 @@
 };
 
 &nand {
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
 	chip-delay = <25>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
index bf7fe8ab88f4..d85ef0a91b50 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -13,6 +13,7 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	gpio-leds {
@@ -51,8 +52,6 @@
 		};
 
 		serial@12100 {
-			pinctrl-0 = <&pmx_uart1>;
-			pinctrl-names = "default";
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index cb9978c652f2..5e586ed04c58 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -13,6 +13,7 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index d5aa9564a287..113dcf056dcf 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -50,7 +50,7 @@
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 
 			pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
 				     &pmx_present_sata1 &pmx_fan_tacho
@@ -183,8 +183,6 @@
 };
 
 &nand {
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
 	status = "okay";
 	chip-delay = <35>;
 
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
index f31312ebd0d6..849736349511 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -14,10 +14,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pmx_usb_power_enable: pmx-usb-power-enable {
 				marvell,pins = "mpp29";
 				marvell,function = "gpio";
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index ef3463e0ae19..6467c7924195 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -14,10 +14,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pmx_led_bluetooth: pmx-led-bluetooth {
 				marvell,pins = "mpp47";
 				marvell,function = "gpio";
@@ -37,13 +38,11 @@
 
 		spi@10600 {
 			status = "okay";
-			pinctrl-0 = <&pmx_spi>;
-			pinctrl-names = "default";
 
 			m25p40@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mx25l1606e";
+				compatible = "mxicy,mx25l1606e";
 				reg = <0>;
 				spi-max-frequency = <50000000>;
 				mode = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts
new file mode 100644
index 000000000000..d4bcc1c7f6b3
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds109.dts
@@ -0,0 +1,42 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS109, DS110, DS110jv20";
+	compatible = "synology,ds109", "synology,ds110jv20",
+		     "synology,ds110", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
new file mode 100644
index 000000000000..95bf83b91b4a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
@@ -0,0 +1,42 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS110j v10 and v30";
+	compatible = "synology,ds110jv10", "synology,ds110jv30",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts
new file mode 100644
index 000000000000..61f47fbe44d0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds111.dts
@@ -0,0 +1,45 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS111";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
new file mode 100644
index 000000000000..bf4143c6cb8f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS111";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-30 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts
new file mode 100644
index 000000000000..6d25093a9ac4
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds209.dts
@@ -0,0 +1,45 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS209";
+	compatible = "synology,ds209", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts
new file mode 100644
index 000000000000..2f1933efcac1
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds210.dts
@@ -0,0 +1,47 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS210 v10, v20, v30, DS211j";
+	compatible = "synology,ds210jv10", "synology,ds210jv20",
+		     "synology,ds210jv30", "synology,ds211j",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts
new file mode 100644
index 000000000000..99afd462f956
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
+	compatible = "synology,ds212", "synology,ds212pv10",
+		     "synology,ds212pv10", "synology,ds212pv20",
+		     "synology,ds213airv10", "synology,ds213v10",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts
new file mode 100644
index 000000000000..f5c4213fc67c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212j.dts
@@ -0,0 +1,42 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212j v10, v20";
+	compatible = "synology,ds212jv10", "synology,ds212jv20",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts
new file mode 100644
index 000000000000..e80a962ebba0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS409, DS410j";
+	compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts
new file mode 100644
index 000000000000..cae5af4b88b5
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409slim.dts
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology 409slim";
+	compatible = "synology,ds409slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-20 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
new file mode 100644
index 000000000000..623cd4a37d71
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411.dts
@@ -0,0 +1,53 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411, DS413jv10";
+	compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	regulators-hdd-34 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts
new file mode 100644
index 000000000000..3348e330f074
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411j.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411j";
+	compatible = "synology,ds411j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts
new file mode 100644
index 000000000000..a0a1fad8b4de
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411slim";
+	compatible = "synology,ds411slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index eb9329420107..aa60a0b049a7 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -14,10 +14,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pmx_usb_power_enable: pmx-usb-power-enable {
 				marvell,pins = "mpp29";
 				marvell,function = "gpio";
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
index 2d51fce74a5a..c5a1fc75c7a3 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
@@ -14,10 +14,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pmx_led_health_r: pmx-led-health-r {
 				marvell,pins = "mpp46";
 				marvell,function = "gpio";
@@ -36,7 +37,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 
@@ -101,13 +101,19 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
-		compatible = "marvell,88e1121";
+		/* Marvell 88E1121R */
+		compatible = "ethernet-phy-id0141.0cb0",
+		             "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
+		phy-connection-type = "rgmii-id";
 	};
 
 	ethphy1: ethernet-phy@1 {
-		compatible = "marvell,88e1121";
+		/* Marvell 88E1121R */
+		compatible = "ethernet-phy-id0141.0cb0",
+		             "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		phy-connection-type = "rgmii-id";
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index a1add3f215e3..bfa5edde179c 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -14,10 +14,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pmx_led_os_red: pmx-led-os-red {
 				marvell,pins = "mpp22";
 				marvell,function = "gpio";
@@ -104,8 +105,6 @@
 
 &nand {
 	status = "okay";
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
 
 	partition@0 {
 		label = "u-boot";
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 8d8c80e3656d..38e31d15a62d 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -14,6 +14,7 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 		linux,initrd-start = <0x4500040>;
 		linux,initrd-end   = <0x4800000>;
 	};
@@ -29,7 +30,7 @@
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pmx_button_reset: pmx-button-reset {
 				marvell,pins = "mpp12";
 				marvell,function = "gpio";
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index 59e7a5adeedb..05291f3990d0 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -14,10 +14,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
 				      &pmx_led_sata_brt_ctrl_2
 				      &pmx_led_backup_brt_ctrl_1
diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/kirkwood-km_common.dtsi
new file mode 100644
index 000000000000..8367c772c764
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-km_common.dtsi
@@ -0,0 +1,48 @@
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
+			pinctrl-names = "default";
+
+			pmx_i2c_gpio_sda: pmx-gpio-sda {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_i2c_gpio_scl: pmx-gpio-scl {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
+			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <25>;
+};
diff --git a/arch/arm/boot/dts/kirkwood-km_fixedeth.dts b/arch/arm/boot/dts/kirkwood-km_fixedeth.dts
new file mode 100644
index 000000000000..9895f2b10f8a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-km_fixedeth.dts
@@ -0,0 +1,23 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
+#include "kirkwood-km_common.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Fixed Eth";
+	compatible = "keymile,km_fixedeth", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;  /* <SPEED_1000> */
+		duplex = <1>; /* <DUPLEX_FULL> */
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index 04a1e44541b3..235bf382fff9 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -2,6 +2,7 @@
 
 #include "kirkwood.dtsi"
 #include "kirkwood-98dx4122.dtsi"
+#include "kirkwood-km_common.dtsi"
 
 / {
 	model = "Keymile Kirkwood Reference Design";
@@ -11,44 +12,6 @@
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-
-	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
-			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
-			pinctrl-names = "default";
-
-			pmx_i2c_gpio_sda: pmx-gpio-sda {
-				marvell,pins = "mpp8";
-				marvell,function = "gpio";
-			};
-			pmx_i2c_gpio_scl: pmx-gpio-scl {
-				marvell,pins = "mpp9";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "ok";
-		};
-	};
-
-	i2c@0 {
-		compatible = "i2c-gpio";
-		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
-			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-	};
-};
-
-&nand {
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
-	status = "ok";
-	chip-delay = <25>;
 };
 
 &mdio {
diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts
index c9e82eff9bf2..24425660e973 100644
--- a/arch/arm/boot/dts/kirkwood-laplug.dts
+++ b/arch/arm/boot/dts/kirkwood-laplug.dts
@@ -24,6 +24,7 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	mbus {
@@ -37,24 +38,20 @@
 
 	ocp@f1000000 {
 		serial@12000 {
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
 			status = "okay";
 		};
 
 		i2c@11000 {
-			pinctrl-0 = <&pmx_twsi0>;
-			pinctrl-names = "default";
 			status = "okay";
 
 			eeprom@50 {
-				compatible = "at,24c04";
+				compatible = "atmel,24c04";
 				pagesize = <16>;
 				reg = <0x50>;
 			};
 		};
 
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pmx_usb_power_enable: pmx-usb-power-enable {
 				marvell,pins = "mpp14";
 				marvell,function = "gpio";
@@ -139,7 +136,6 @@
 &nand {
 	/* Total size : 512MB */
 	status = "okay";
-	pinctrl-0 = <&pmx_nand>;
 
 	partition@0 {
 		label = "u-boot";
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 1656653d339b..53484474df1f 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -4,10 +4,11 @@
 / {
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pmx_power_hdd: pmx-power-hdd {
 				marvell,pins = "mpp10";
 				marvell,function = "gpo";
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index 73722c067501..f3a991837515 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -12,9 +12,10 @@
                 reg = <0x00000000 0x20000000>;
         };
 
-        chosen {
-                bootargs = "console=ttyS0,115200n8 earlyprintk";
-        };
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
 
 	mbus {
 		pcie-controller {
@@ -27,7 +28,7 @@
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pmx_led_health: pmx-led-health {
 				marvell,pins = "mpp7";
 				marvell,function = "gpo";
@@ -89,11 +90,9 @@
 
                 };
 
-                serial@12000 {
-                        status = "ok";
-                        pinctrl-0 = <&pmx_uart0>;
-                        pinctrl-names = "default";
-                };
+		serial@12000 {
+			status = "okay";
+		};
 
 		rtc@10300 {
 			status = "disabled";
@@ -163,8 +162,6 @@
 };
 
 &nand {
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
 	status = "okay";
 
 	partition@0 {
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index dc86429756d7..8f76d28759a3 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -28,10 +28,21 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+        };
+
 	ocp@f1000000 {
-		pinctrl@10000 {
+		pin-controller@10000 {
 			pmx_usb_led: pmx-usb-led {
 				marvell,pins = "mpp12";
 				marvell,function = "gpo";
@@ -49,14 +60,12 @@
 		};
 
 		spi@10600 {
-			pinctrl-0 = <&pmx_spi>;
-			pinctrl-names = "default";
 			status = "okay";
 
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mx25l12805d";
+				compatible = "mxicy,mx25l12805d";
 				reg = <0>;
 				spi-max-frequency = <50000000>;
 				mode = <0>;
@@ -64,22 +73,11 @@
 		};
 
 		serial@12000 {
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
-			clock-frequency = <200000000>;
-			status = "ok";
-		};
-
-		ehci@50000 {
 			status = "okay";
 		};
 
-		pcie-controller {
+		ehci@50000 {
 			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
 		};
 	};
 
@@ -122,4 +120,66 @@
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth0>;
+		dsa,mii-bus = <&ethphy0>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@ff {
+		reg = <0xff>; 	/* No phy attached */
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
index 4838478019cc..fd733c63bc27 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -25,6 +25,7 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	mbus {
@@ -38,7 +39,7 @@
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pmx_button_power: pmx-button-power {
 				marvell,pins = "mpp47";
 				marvell,function = "gpio";
@@ -112,8 +113,6 @@
 		};
 
 		serial@12000 {
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
index 7c8a0d9d8d1f..b514d643fb6c 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
@@ -25,6 +25,7 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	mbus {
@@ -40,7 +41,7 @@
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pmx_button_power: pmx-button-power {
 				marvell,pins = "mpp47";
 				marvell,function = "gpio";
@@ -119,8 +120,6 @@
 		};
 
 		serial@12000 {
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 743152f31a81..fe6c0246db1a 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -4,10 +4,11 @@
 / {
 	chosen {
 		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pmx_ns2_sata0: pmx-ns2-sata0 {
 				marvell,pins = "mpp21";
 				marvell,function = "sata0";
@@ -19,20 +20,16 @@
 		};
 
 		serial@12000 {
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
 			status = "okay";
 		};
 
 		spi@10600 {
-			pinctrl-0 = <&pmx_spi>;
-			pinctrl-names = "default";
 			status = "okay";
 
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mx25l4005a";
+				compatible = "mxicy,mx25l4005a";
 				reg = <0>;
 				spi-max-frequency = <20000000>;
 				mode = <0>;
@@ -45,12 +42,10 @@
 		};
 
 		i2c@11000 {
-			pinctrl-0 = <&pmx_twsi0>;
-			pinctrl-names = "default";
 			status = "okay";
 
 			eeprom@50 {
-				compatible = "at,24c04";
+				compatible = "atmel,24c04";
 				pagesize = <16>;
 				reg = <0x50>;
 			};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 03fa24cf3344..6139df0f376c 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-#include "kirkwood-nsa310-common.dtsi"
+#include "kirkwood-nsa3x0-common.dtsi"
 
 / {
 	compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
@@ -12,6 +12,7 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
 	};
 
 	mbus {
@@ -25,7 +26,7 @@
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pinctrl-0 = <&pmx_unknown>;
 			pinctrl-names = "default";
 
@@ -59,26 +60,6 @@
 				marvell,function = "gpio";
 			};
 
-			pmx_btn_reset: pmx-btn-reset {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_copy: pmx-btn-copy {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_green: pmx-led-copy-green {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_red: pmx-led-copy-red {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-
 			pmx_led_hdd_green: pmx-led-hdd-green {
 				marvell,pins = "mpp41";
 				marvell,function = "gpio";
@@ -94,46 +75,18 @@
 				marvell,function = "gpio";
 			};
 
-			pmx_btn_power: pmx-btn-power {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
 		};
 
 		i2c@11000 {
 			status = "okay";
 
 			adt7476: adt7476a@2e {
-				compatible = "adt7476";
+				compatible = "adi,adt7476";
 				reg = <0x2e>;
 			};
 		};
 	};
 
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-		button@2 {
-			label = "Copy Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts
index a5e779452867..3d2b3d494c19 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310a.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-#include "kirkwood-nsa310-common.dtsi"
+#include "kirkwood-nsa3x0-common.dtsi"
 
 /*
  * There are at least two different NSA310 designs. This variant does
@@ -17,10 +17,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pinctrl-names = "default";
 
 			pmx_led_esata_green: pmx-led-esata-green {
@@ -38,11 +39,6 @@
 				marvell,function = "gpio";
 			};
 
-			pmx_usb_power_off: pmx-usb-power-off {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
 			pmx_led_sys_green: pmx-led-sys-green {
 				marvell,pins = "mpp28";
 				marvell,function = "gpio";
@@ -53,26 +49,6 @@
 				marvell,function = "gpio";
 			};
 
-			pmx_btn_reset: pmx-btn-reset {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_copy: pmx-btn-copy {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_green: pmx-led-copy-green {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_red: pmx-led-copy-red {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-
 			pmx_led_hdd_green: pmx-led-hdd-green {
 				marvell,pins = "mpp41";
 				marvell,function = "gpio";
@@ -83,45 +59,18 @@
 				marvell,function = "gpio";
 			};
 
-			pmx_btn_power: pmx-btn-power {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-
 		};
 
 		i2c@11000 {
 			status = "okay";
 
 			lm85: lm85@2e {
-				compatible = "lm85";
+				compatible = "national,lm85";
 				reg = <0x2e>;
 			};
 		};
 	};
 
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-		button@2 {
-			label = "Copy Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
 	gpio-leds {
 		compatible = "gpio-leds";
 
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts
new file mode 100644
index 000000000000..24f686d1044d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa320.dts
@@ -0,0 +1,215 @@
+/* Device tree file for the Zyxel NSA 320 NAS box.
+ *
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based upon the board setup file created by Peter Schildmann */
+
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+	model = "Zyxel NSA320";
+	compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			/* SATA Activity and Present pins are not connected */
+			pmx_sata0: pmx-sata0 {
+				marvell,pins ;
+				marvell,function = "sata0";
+			};
+
+			pmx_sata1: pmx-sata1 {
+				marvell,pins ;
+				marvell,function = "sata1";
+			};
+
+			pmx_led_hdd2_green: pmx-led-hdd2-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd2_red: pmx-led-hdd2-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_data: pmx-mcu-data {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_clk: pmx-mcu-clk {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_act: pmx-mcu-act {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_orange: pmx-led-sys-orange {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_green: pmx-led-hdd1-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_red: pmx-led-hdd1-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_htp: pmx-htp {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			/* Buzzer needs to be switched at around 1kHz so is
+			   not compatible with the gpio-beeper driver. */
+			pmx_buzzer: pmx-buzzer {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_vid_b1: pmx-vid-b1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_data: pmx-power-resume-data {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_clk: pmx-power-resume-clk {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			pcf8563: pcf8563@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	regulators {
+		usb0_power: regulator@1 {
+			enable-active-high;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+			     &pmx_led_usb_green
+			     &pmx_led_sys_green &pmx_led_sys_orange
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa320:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		orange-sys {
+			label = "nsa320:orange:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd1 {
+			label = "nsa320:green:hdd1";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd1 {
+			label = "nsa320:red:hdd1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd2 {
+			label = "nsa320:green:hdd2";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd2 {
+			label = "nsa320:red:hdd2";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa320:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa320:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa320:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/* The following pins are currently not assigned to a driver,
+	   some of them should be configured as inputs.
+	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
+		     &pmx_htp &pmx_vid_b1
+		     &pmx_power_resume_data &pmx_power_resume_clk>; */
+};
+
+&mdio {
+	status = "okay";
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
index aa78c2d11fe7..2075a2e828f1 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
@@ -4,18 +4,53 @@
 / {
 	model = "ZyXEL NSA310";
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 
-			pmx_usb_power_off: pmx-usb-power-off {
+			pmx_usb_power: pmx-usb-power {
 				marvell,pins = "mpp21";
 				marvell,function = "gpio";
 			};
+
 			pmx_pwr_off: pmx-pwr-off {
 				marvell,pins = "mpp48";
 				marvell,function = "gpio";
 			};
 
+			pmx_btn_reset: pmx-btn-reset {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_copy: pmx-btn-copy {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_power: pmx-btn-power {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_green: pmx-led-copy-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_red: pmx-led-copy-red {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
 		};
 
 		serial@12000 {
@@ -26,14 +61,6 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio_poweroff {
@@ -43,17 +70,42 @@
 		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 	};
 
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+		button@3 {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_off>;
+		pinctrl-0 = <&pmx_usb_power>;
 		pinctrl-names = "default";
 
-		usb0_power_off: regulator@1 {
+		usb0_power: regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
-			regulator-name = "USB Power Off";
+			regulator-name = "USB Power";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			regulator-always-on;
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index b88da9392c32..fb9dc227255d 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -14,19 +14,16 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
 		serial@12000 {
-			status = "ok";
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
+			status = "okay";
 		};
 
 		serial@12100 {
-			status = "ok";
-			pinctrl-0 = <&pmx_uart1>;
-			pinctrl-names = "default";
+			status = "okay";
 		};
 
 		sata@80000 {
@@ -36,16 +33,14 @@
 
 		i2c@11100 {
 			status = "okay";
-			pinctrl-0 = <&pmx_twsi1>;
-			pinctrl-names = "default";
 
 			s35390a: s35390a@30 {
-				compatible = "s35390a";
+				compatible = "sii,s35390a";
 				reg = <0x30>;
 			};
 		};
 
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
 			pinctrl-names = "default";
 
@@ -133,8 +128,6 @@
 &nand {
 	chip-delay = <25>;
 	status = "okay";
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
 
 	partition@0 {
 		label = "uboot";
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
index b2f7cae06839..d5e3bc518968 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
@@ -26,19 +26,16 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
 		serial@12000 {
-			status = "ok";
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
+			status = "okay";
 		};
 
 		serial@12100 {
-			status = "ok";
-			pinctrl-0 = <&pmx_uart1>;
-			pinctrl-names = "default";
+			status = "okay";
 		};
 
 		sata@80000 {
@@ -48,16 +45,14 @@
 
 		i2c@11100 {
 			status = "okay";
-			pinctrl-0 = <&pmx_twsi1>;
-			pinctrl-names = "default";
 
 			s24c02: s24c02@50 {
-				compatible = "24c02";
+				compatible = "atmel,24c02";
 				reg = <0x50>;
 			};
 		};
 
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
 			pinctrl-names = "default";
 
@@ -109,13 +104,6 @@
 				marvell,pins = "mpp41", "mpp42", "mpp43";
 				marvell,function = "gpio";
 			};
-
-			pmx_ge1: pmx-ge1 {
-				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
-					       "mpp24", "mpp25", "mpp26", "mpp27",
-					       "mpp30", "mpp31", "mpp32", "mpp33";
-				marvell,function = "ge1";
-			};
 		};
 	};
 
@@ -158,8 +146,6 @@
 &nand {
 	chip-delay = <25>;
 	status = "okay";
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
 
 	partition@0 {
 		label = "uboot";
@@ -213,8 +199,6 @@
 
 &eth1 {
 	status = "okay";
-	pinctrl-0 = <&pmx_ge1>;
-	pinctrl-names = "default";
 	ethernet1-port@0 {
 		phy-handle = <&ethphy1>;
 	};
diff --git a/arch/arm/boot/dts/kirkwood-openrd-base.dts b/arch/arm/boot/dts/kirkwood-openrd-base.dts
new file mode 100644
index 000000000000..8af58999606d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openrd-base.dts
@@ -0,0 +1,42 @@
+/*
+ * Marvell OpenRD Base Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * base variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Base";
+	compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		serial@12100 {
+			status = "okay";
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts
new file mode 100644
index 000000000000..887b9c1fee43
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts
@@ -0,0 +1,73 @@
+/*
+ * Marvell OpenRD Client Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * client variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Client";
+	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			cs42l51: cs42l51@4a {
+				compatible = "cirrus,cs42l51";
+				reg = <0x4a>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&cs42l51>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+	ethphy1: ethernet-phy@24 {
+		reg = <24>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts b/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts
new file mode 100644
index 000000000000..9f12f8b53e24
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts
@@ -0,0 +1,58 @@
+/*
+ * Marvell OpenRD Ultimate Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * ultimate variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Ultimate";
+	compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			cs42l51: cs42l51@4a {
+				compatible = "cirrus,cs42l51";
+				reg = <0x4a>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi
new file mode 100644
index 000000000000..d3330dadf7ed
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi
@@ -0,0 +1,90 @@
+/*
+ * Marvell OpenRD (Base|Client|Ultimate) Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
+			pinctrl-names = "default";
+
+			pmx_select28: pmx-select-uart-sd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_select34: pmx-select-rs232-rs484 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+		mvsdio@90000 {
+			status = "okay";
+			cd-gpios = <&gpio0 29 9>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@600000 {
+		label = "root";
+		reg = <0x0600000 0x1FA00000>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
new file mode 100644
index 000000000000..35a29dee8dd8
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
@@ -0,0 +1,111 @@
+/*
+ * Marvell RD88F6192 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "Marvell RD88F6192 reference design";
+	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_usb_power>;
+			pinctrl-names = "default";
+
+                        pmx_usb_power: pmx-usb-power {
+                                marvell,pins = "mpp10";
+                                marvell,function = "gpo";
+                        };
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p128@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p128";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	regulators {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                pinctrl-0 = <&pmx_usb_power>;
+                pinctrl-names = "default";
+
+                usb_power: regulator@0 {
+                        compatible = "regulator-fixed";
+                        reg = <0>;
+                        regulator-name = "USB VBUS";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        enable-active-high;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+                };
+	};
+};
+
+&mdio {
+        status = "okay";
+
+        ethphy0: ethernet-phy@8 {
+                reg = <8>;
+        };
+};
+
+&eth0 {
+        status = "okay";
+        ethernet0-port@0 {
+                phy-handle = <&ethphy0>;
+        };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts
new file mode 100644
index 000000000000..a803bbb70bc8
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts
@@ -0,0 +1,26 @@
+/*
+ * Marvell RD88F6181 A0 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions for the board with the A0 variant of
+ * the SoC. The ethernet switch does not have a "wan" port.
+ */
+
+/dts-v1/;
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+	model = "Marvell RD88f6281 Reference design, with A0 SoC";
+	compatible = "marvell,rd88f6281-a0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	dsa@0 {
+		switch@0 {
+			reg = <10 0>;    /* MDIO address 10, switch 0 in tree */
+		};
+	};
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts
new file mode 100644
index 000000000000..baeebbf1d8c7
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts
@@ -0,0 +1,31 @@
+/*
+ * Marvell RD88F6181 A1 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions for the board with the A1 variant of
+ * the SoC. The ethernet switch has a "wan" port.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+	model = "Marvell RD88f6281 Reference design, with A1 SoC";
+	compatible = "marvell,rd88f6281-a1", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	dsa@0 {
+		switch@0 {
+			reg = <0 0>;    /* MDIO address 0, switch 0 in tree */
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+		};
+	};
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
new file mode 100644
index 000000000000..26cf0e0ccefd
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -0,0 +1,153 @@
+/*
+ * Marvell RD88F6181 Common Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the two
+ * variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_sdio_cd>;
+			pinctrl-names = "default";
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			/* No WP GPIO */
+		};
+	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth0>;
+		dsa,mii-bus = <&ethphy1>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+		};
+       };
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x200000>;
+	};
+
+	partition@300000 {
+		label = "data";
+		reg = <0x0300000 0x500000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@ff {
+		reg = <0xff>; /* No PHY attached */
+		speed = <1000>;
+		duple = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
new file mode 100644
index 000000000000..3b19f1fd4cac
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs212.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS212";
+	compatible = "synology,rs212", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-38 {
+		status = "okay";
+	};
+
+	regulators-hdd-30-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts
new file mode 100644
index 000000000000..921ca49e85a4
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs409.dts
@@ -0,0 +1,45 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS409";
+	compatible = "synology,rs409", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts
new file mode 100644
index 000000000000..02852b0c809f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs411.dts
@@ -0,0 +1,45 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS411 RS812";
+	compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
index 1ff848d570a9..7196c7f3e109 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
@@ -17,10 +17,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 
 			pmx_usb_power_enable: pmx-usb-power-enable {
 				marvell,pins = "mpp29";
@@ -44,8 +45,6 @@
 			};
 		};
 		serial@12000 {
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
 			status = "okay";
 		};
 	};
@@ -72,8 +71,6 @@
 };
 
 &nand {
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
 	status = "okay";
 
 	partition@0 {
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
new file mode 100644
index 000000000000..811e0971fc58
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -0,0 +1,863 @@
+/*
+ * Nodes for Marvell 628x Synology devices
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			pcie2: pcie@2,0 {
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_alarmled_12: pmx-alarmled-12 {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_15: pmx-fanctrl-15 {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_16: pmx-fanctrl-16 {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_17: pmx-fanctrl-17 {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_18: pmx-fanalarm-18 {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+
+			pmx_hddled_20: pmx-hddled-20 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_21: pmx-hddled-21 {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_22: pmx-hddled-22 {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_23: pmx-hddled-23 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_24: pmx-hddled-24 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_25: pmx-hddled-25 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_26: pmx-hddled-26 {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_27: pmx-hddled-27 {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_28: pmx-hddled-28 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_32: pmx-fanctrl-32 {
+				marvell,pins = "mpp32";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_33: pmx-fanctrl-33 {
+				marvell,pins = "mpp33";
+				marvell,function = "gpo";
+			};
+
+			pmx_fanctrl_34: pmx-fanctrl-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_35: pmx-fanalarm-35 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_36: pmx-hddled-36 {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_37: pmx-hddled-37 {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_38: pmx-hddled-38 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_39: pmx-hddled-39 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_40: pmx-hddled-40 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_41: pmx-hddled-41 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_42: pmx-hddled-42 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_43: pmx-hddled-43 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_44: pmx-hddled-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_45: pmx-hddled-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_44: pmx-fanalarm-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_45: pmx-fanalarm-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+		};
+
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p80";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@00000000 {
+					reg = <0x00000000 0x00080000>;
+					label = "RedBoot";
+				};
+
+				partition@00080000 {
+					reg = <0x00080000 0x00200000>;
+					label = "zImage";
+				};
+
+				partition@00280000 {
+					reg = <0x00280000 0x00140000>;
+					label = "rd.gz";
+				};
+
+				partition@003c0000 {
+					reg = <0x003c0000 0x00010000>;
+					label = "vendor";
+				};
+
+				partition@003d0000 {
+					reg = <0x003d0000 0x00020000>;
+					label = "RedBoot config";
+				};
+
+				partition@003f0000 {
+					reg = <0x003f0000 0x00010000>;
+					label = "FIS directory";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			rs5c372: rs5c372@32 {
+				status = "disabled";
+				compatible = "ricoh,rs5c372";
+				reg = <0x32>;
+			};
+
+			s35390a: s35390a@30 {
+				status = "disabled";
+				compatible = "ssi,s35390a";
+				reg = <0x30>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+
+		poweroff@12100 {
+			compatible = "synology,power-off";
+			reg = <0x12100 0x100>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-fan-150-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-100-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
+			       &gpio1 12 GPIO_ACTIVE_HIGH
+			       &gpio1 13 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-leds-alarm-12 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_alarmled_12>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:alarm";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-20 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
+			     &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
+			     &pmx_hddled_26 &pmx_hddled_27>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-36 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
+			     &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
+			     &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
+			     &pmx_hddled_45>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-green {
+			label = "synology:green:hdd5";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-amber {
+			label = "synology:amber:hdd5";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-38 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators-hdd-29 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-1 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-2 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-4 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
+			     &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-31 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-34 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
+			     &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <9>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "disabled";
+
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
new file mode 100644
index 000000000000..610ec0f95858
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -0,0 +1,231 @@
+/*
+ * Device Tree file for HP t5325 Thin Client"
+ *
+ * Copyright (C) 2014
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "HP t5325 Thin Client";
+	compatible = "hp,t5325", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
+			pinctrl-names = "default";
+
+			pmx_button_power: pmx-button_power {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+			pmx_led: pmx-led {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_sata_power_enable: pmx-usb-sata-power-enable {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7";
+				marvell,function = "spi";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_i2s: pmx-i2s {
+				marvell,pins = "mpp39", "mpp40", "mpp41", "mpp42",
+					       "mpp43";
+				marvell,function = "audio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p80";
+				spi-max-frequency = <86000000>;
+				reg = <0>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+
+				partition@1 {
+					reg = <0x80000 0x40000>;
+					label = "SSD firmware";
+				};
+
+				partition@2 {
+					reg = <0xc0000 0x10000>;
+					label = "u-boot env";
+				};
+
+				partition@3 {
+					reg = <0xd0000 0x10000>;
+					label = "permanent u-boot env";
+				};
+
+				partition@4 {
+					reg = <0xd0000 0x10000>;
+					label = "permanent u-boot env";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			alc5621: alc5621@1a {
+				compatible = "realtek,alc5621";
+				reg = <0x1a>;
+				#sound-dai-cells = <0>;
+				add-ctrl = <0x3700>;
+				jack-det-ctrl = <0x4810>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		audio: audio-controller@a0000 {
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_sata_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB-SATA Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_power>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Speaker", "SPKOUT",
+			"Speaker", "SPKOUTN",
+			"MIC1", "Mic Jack",
+			"MIC2", "Mic Jack";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker",
+			"Microphone", "Mic Jack";
+
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&alc5621>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index 5fc817c2cb87..f5c8c0dd41dc 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -14,10 +14,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			/*
 			 * Switch positions
 			 *
@@ -85,9 +86,7 @@
 		};
 
 		serial@12000 {
-			status = "ok";
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
+			status = "okay";
 		};
 
 		sata@80000 {
@@ -96,9 +95,7 @@
 		};
 
 		i2c@11000 {
-			status = "ok";
-			pinctrl-0 = <&pmx_twsi0>;
-			pinctrl-names = "default";
+			status = "okay";
 		};
 
 		mvsdio@90000 {
@@ -175,8 +172,6 @@
 
 &nand {
 	status = "okay";
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
 
 	partition@0 {
 		label = "u-boot";
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
index c17ae45e19be..9767d73f3857 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -6,7 +6,7 @@
 
 / {
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 
 			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
 			pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index 0713d072758a..bfc1a32d4e42 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -16,7 +16,7 @@
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 
 			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
 			pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 911f3a8cee23..df7f15276575 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -9,6 +9,7 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
 	};
 
 	mbus {
@@ -25,8 +26,6 @@
 		i2c@11000 {
 			status = "okay";
 			clock-frequency = <400000>;
-			pinctrl-0 = <&pmx_twsi0>;
-			pinctrl-names = "default";
 
 			s35390a: s35390a@30 {
 				compatible = "s35390a";
@@ -34,16 +33,10 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "okay";
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
 		};
 		serial@12100 {
-			clock-frequency = <200000000>;
 			status = "okay";
-			pinctrl-0 = <&pmx_uart1>;
-			pinctrl-names = "default";
 		};
 		poweroff@12100 {
 			compatible = "qnap,power-off";
@@ -52,8 +45,6 @@
 		};
 		spi@10600 {
 			status = "okay";
-			pinctrl-0 = <&pmx_spi>;
-			pinctrl-names = "default";
 
 			m25p128@0 {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6281.dts b/arch/arm/boot/dts/kirkwood-ts419-6281.dts
new file mode 100644
index 000000000000..aa22aa862857
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts419-6281.dts
@@ -0,0 +1,20 @@
+/*
+ * Device Tree file for QNAP TS41X with 6281 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+&ethphy0 { reg = <8>; };
+&ethphy1 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/kirkwood-ts419-6282.dts
new file mode 100644
index 000000000000..d7512d4cdced
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts419-6282.dts
@@ -0,0 +1,32 @@
+/*
+ * Device Tree file for QNAP TS41X with 6282 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+/ {
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@2,0 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
+&ethphy1 { reg = <1>; };
diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/kirkwood-ts419.dtsi
new file mode 100644
index 000000000000..30ab93bfb1e4
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts419.dtsi
@@ -0,0 +1,75 @@
+/*
+ * Device Tree include file for QNAP TS41X
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/ {
+	model = "QNAP TS419 family";
+	compatible = "qnap,ts419", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			/*
+			 * JP1 indicates if an LCD module is installed
+			 * on the serial port (0), or if the port is used
+			 * as a console (1).
+			 */
+			pmx_jumper_jp1: pmx-jumper_jp1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 6abf44d257df..afc640cd80c5 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -24,6 +24,7 @@
 	aliases {
 	       gpio0 = &gpio0;
 	       gpio1 = &gpio1;
+	       i2c0 = &i2c0;
 	};
 
 	mbus {
@@ -39,7 +40,7 @@
 		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
 		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
 
-		crypto@0301 {
+		cesa: crypto@0301 {
 			compatible = "marvell,orion-crypto";
 			reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
 			      <MBUS_ID(0x03, 0x01) 0 0x800>;
@@ -60,6 +61,8 @@
 			chip-delay = <25>;
 			/* set partition map and/or chip-delay in board dts */
 			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_nand>;
+			pinctrl-names = "default";
 			status = "disabled";
 		};
 	};
@@ -70,13 +73,59 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		pinctrl: pin-controller@10000 {
+			/* set compatible property in SoC file */
+			reg = <0x10000 0x20>;
+
+			pmx_ge1: pmx-ge1 {
+				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
+					       "mpp24", "mpp25", "mpp26", "mpp27",
+					       "mpp30", "mpp31", "mpp32", "mpp33";
+				marvell,function = "ge1";
+			};
+
+			pmx_nand: pmx-nand {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+					       "mpp4", "mpp5", "mpp18", "mpp19";
+				marvell,function = "nand";
+			};
+
+			/*
+			 * Default SPI0 pinctrl setting with CSn on mpp0,
+			 * overwrite marvell,pins on board level if required.
+			 */
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+				marvell,function = "spi";
+			};
+
+			pmx_twsi0: pmx-twsi0 {
+				marvell,pins = "mpp8", "mpp9";
+				marvell,function = "twsi0";
+			};
+
+			/*
+			 * Default UART pinctrl setting without RTS/CTS,
+			 * overwrite marvell,pins on board level if required.
+			 */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14";
+				marvell,function = "uart1";
+			};
+		};
+
 		core_clk: core-clocks@10030 {
 			compatible = "marvell,kirkwood-core-clock";
 			reg = <0x10030 0x4>;
 			#clock-cells = <1>;
 		};
 
-		spi@10600 {
+		spi0: spi@10600 {
 			compatible = "marvell,orion-spi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -84,6 +133,8 @@
 			interrupts = <23>;
 			reg = <0x10600 0x28>;
 			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_spi>;
+			pinctrl-names = "default";
 			status = "disabled";
 		};
 
@@ -111,7 +162,7 @@
 			clocks = <&gate_clk 7>;
 		};
 
-		i2c@11000 {
+		i2c0: i2c@11000 {
 			compatible = "marvell,mv64xxx-i2c";
 			reg = <0x11000 0x20>;
 			#address-cells = <1>;
@@ -119,24 +170,30 @@
 			interrupts = <29>;
 			clock-frequency = <100000>;
 			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_twsi0>;
+			pinctrl-names = "default";
 			status = "disabled";
 		};
 
-		serial@12000 {
+		uart0: serial@12000 {
 			compatible = "ns16550a";
 			reg = <0x12000 0x100>;
 			reg-shift = <2>;
 			interrupts = <33>;
 			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
 			status = "disabled";
 		};
 
-		serial@12100 {
+		uart1: serial@12100 {
 			compatible = "ns16550a";
 			reg = <0x12100 0x100>;
 			reg-shift = <2>;
 			interrupts = <34>;
 			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
 			status = "disabled";
 		};
 
@@ -145,6 +202,11 @@
 			reg = <0x20000 0x80>, <0x1500 0x20>;
 		};
 
+		sysc: system-controller@20000 {
+			compatible = "marvell,orion-system-controller";
+			reg = <0x20000 0x120>;
+		};
+
 		bridge_intc: bridge-interrupt-ctrl@20110 {
 			compatible = "marvell,orion-bridge-intc";
 			interrupt-controller;
@@ -161,6 +223,11 @@
 			#clock-cells = <1>;
 		};
 
+		l2: l2-cache@20128 {
+			compatible = "marvell,kirkwood-cache";
+			reg = <0x20128 0x4>;
+		};
+
 		intc: main-interrupt-ctrl@20200 {
 			compatible = "marvell,orion-intc";
 			interrupt-controller;
@@ -178,14 +245,14 @@
 
 		wdt: watchdog-timer@20300 {
 			compatible = "marvell,orion-wdt";
-			reg = <0x20300 0x28>;
+			reg = <0x20300 0x28>, <0x20108 0x4>;
 			interrupt-parent = <&bridge_intc>;
 			interrupts = <3>;
 			clocks = <&gate_clk 7>;
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb0: ehci@50000 {
 			compatible = "marvell,orion-ehci";
 			reg = <0x50000 0x1000>;
 			interrupts = <19>;
@@ -193,7 +260,7 @@
 			status = "okay";
 		};
 
-		xor@60800 {
+		dma0: xor@60800 {
 			compatible = "marvell,orion-xor";
 			reg = <0x60800 0x100
 			       0x60A00 0x100>;
@@ -213,7 +280,7 @@
 			};
 		};
 
-		xor@60900 {
+		dma1: xor@60900 {
 			compatible = "marvell,orion-xor";
 			reg = <0x60900 0x100
 			       0x60B00 0x100>;
@@ -271,6 +338,8 @@
 			reg = <0x76000 0x4000>;
 			clocks = <&gate_clk 19>;
 			marvell,tx-checksum-limit = <1600>;
+			pinctrl-0 = <&pmx_ge1>;
+			pinctrl-names = "default";
 			status = "disabled";
 
 			ethernet1-port@0 {
@@ -300,5 +369,15 @@
 			#phy-cells = <0>;
 			status = "ok";
 		};
+
+		audio0: audio-controller@a0000 {
+			compatible = "marvell,kirkwood-audio";
+			#sound-dai-cells = <0>;
+			reg = <0xa0000 0x2210>;
+			interrupts = <24>;
+			clocks = <&gate_clk 9>;
+			clock-names = "internal";
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi
index 1579c3491ccd..fb354225740a 100644
--- a/arch/arm/boot/dts/marco.dtsi
+++ b/arch/arm/boot/dts/marco.dtsi
@@ -36,7 +36,7 @@
 		ranges = <0x40000000 0x40000000 0xa0000000>;
 
 		l2-cache-controller@c0030000 {
-			compatible = "sirf,marco-pl310-cache", "arm,pl310-cache";
+			compatible = "arm,pl310-cache";
 			reg = <0xc0030000 0x1000>;
 			interrupts = <0 59 0>;
 			arm,tag-latency = <1 1 1>;
@@ -58,9 +58,10 @@
 			#size-cells = <1>;
 			ranges = <0xc2000000 0xc2000000 0x1000000>;
 
-			reset-controller@c2000000 {
+			rstc: reset-controller@c2000000 {
 				compatible = "sirf,marco-rstc";
 				reg = <0xc2000000 0x10000>;
+				#reset-cells = <1>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
index f577b7df9a29..521c587acaee 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -24,11 +24,10 @@
 		compatible = "smsc,lan9221", "smsc,lan9115";
 		bank-width = <2>;
 		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
+		gpmc,cs-on-ns = <1>;
+		gpmc,cs-rd-off-ns = <180>;
+		gpmc,cs-wr-off-ns = <180>;
+		gpmc,adv-rd-off-ns = <18>;
 		gpmc,adv-wr-off-ns = <48>;
 		gpmc,oe-on-ns = <54>;
 		gpmc,oe-off-ns = <168>;
@@ -36,12 +35,10 @@
 		gpmc,we-off-ns = <168>;
 		gpmc,rd-cycle-ns = <186>;
 		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
+		gpmc,access-ns = <144>;
+		gpmc,page-burst-access-ns = <24>;
+		gpmc,bus-turnaround-ns = <90>;
+		gpmc,cycle2cycle-delay-ns = <90>;
 		gpmc,cycle2cycle-samecsen;
 		gpmc,cycle2cycle-diffcsen;
 		vddvario-supply = <&vddvario>;
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
new file mode 100644
index 000000000000..73e272fadc20
--- /dev/null
+++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Common file for GPMC connected smsc9221 on omaps
+ *
+ * Compared to smsc911x, smsc9221 (and others like smsc9217
+ * or smsc 9218) has faster timings, leading to higher
+ * bandwidth.
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&gpmc {
+	ethernet@gpmc {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		bank-width = <2>;
+
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <42>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <42>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <36>;
+		gpmc,rd-cycle-ns = <60>;
+		gpmc,wr-cycle-ns = <54>;
+		gpmc,access-ns = <36>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <18>;
+		gpmc,wr-access-ns = <42>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 5377ddf83bf8..8f8c07da4ac1 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -71,13 +71,6 @@
 			interrupts = <58>;
 		};
 
-		mailbox: mailbox@48094000 {
-			compatible = "ti,omap2-mailbox";
-			ti,hwmods = "mailbox";
-			reg = <0x48094000 0x200>;
-			interrupts = <26>;
-		};
-
 		intc: interrupt-controller@1 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
@@ -271,5 +264,36 @@
 			ti,hwmods = "timer12";
 			ti,timer-pwm;
 		};
+
+		dss: dss@48050000 {
+			compatible = "ti,omap2-dss";
+			reg = <0x48050000 0x400>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@48050400 {
+				compatible = "ti,omap2-dispc";
+				reg = <0x48050400 0x400>;
+				interrupts = <25>;
+				ti,hwmods = "dss_dispc";
+			};
+
+			rfbi: encoder@48050800 {
+				compatible = "ti,omap2-rfbi";
+				reg = <0x48050800 0x400>;
+				status = "disabled";
+				ti,hwmods = "dss_rfbi";
+			};
+
+			venc: encoder@48050c00 {
+				compatible = "ti,omap2-venc";
+				reg = <0x48050c00 0x400>;
+				status = "disabled";
+				ti,hwmods = "dss_venc";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap2420-clocks.dtsi b/arch/arm/boot/dts/omap2420-clocks.dtsi
new file mode 100644
index 000000000000..ce8c742d7e92
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-clocks.dtsi
@@ -0,0 +1,270 @@
+/*
+ * Device Tree Source for OMAP2420 clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&prcm_clocks {
+	sys_clkout2_src_gate: sys_clkout2_src_gate {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout2_src_mux: sys_clkout2_src_mux {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout2_src: sys_clkout2_src {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>;
+	};
+
+	sys_clkout2: sys_clkout2 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkout2_src>;
+		ti,bit-shift = <11>;
+		ti,max-div = <64>;
+		reg = <0x0070>;
+		ti,index-power-of-two;
+	};
+
+	dsp_gate_ick: dsp_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <1>;
+		reg = <0x0810>;
+	};
+
+	dsp_div_ick: dsp_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <5>;
+		ti,max-div = <3>;
+		reg = <0x0840>;
+		ti,index-starts-at-one;
+	};
+
+	dsp_ick: dsp_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dsp_gate_ick>, <&dsp_div_ick>;
+	};
+
+	iva1_gate_ifck: iva1_gate_ifck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0800>;
+	};
+
+	iva1_div_ifck: iva1_div_ifck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0840>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
+	};
+
+	iva1_ifck: iva1_ifck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&iva1_gate_ifck>, <&iva1_div_ifck>;
+	};
+
+	iva1_ifck_div: iva1_ifck_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&iva1_ifck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	iva1_mpu_int_ifck: iva1_mpu_int_ifck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&iva1_ifck_div>;
+		ti,bit-shift = <8>;
+		reg = <0x0800>;
+	};
+
+	wdt3_ick: wdt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <28>;
+		reg = <0x0210>;
+	};
+
+	wdt3_fck: wdt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <28>;
+		reg = <0x0200>;
+	};
+
+	mmc_ick: mmc_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x0210>;
+	};
+
+	mmc_fck: mmc_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x0200>;
+	};
+
+	eac_ick: eac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0210>;
+	};
+
+	eac_fck: eac_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0200>;
+	};
+
+	i2c1_fck: i2c1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0200>;
+	};
+
+	i2c2_fck: i2c2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0200>;
+	};
+
+	vlynq_ick: vlynq_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0210>;
+	};
+
+	vlynq_gate_fck: vlynq_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0200>;
+	};
+
+	core_d18_ck: core_d18_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <18>;
+	};
+
+	vlynq_mux_fck: vlynq_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0240>;
+	};
+
+	vlynq_fck: vlynq_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&vlynq_gate_fck>, <&vlynq_mux_fck>;
+	};
+};
+
+&prcm_clockdomains {
+	gfx_clkdm: gfx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gfx_ick>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_fck>, <&vlynq_ick>, <&usb_fck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
+			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
+			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>;
+	};
+
+	iva1_clkdm: iva1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&iva1_mpu_int_ifck>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_ick>, <&dss_54m_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
+			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
+			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
+			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcspi1_ick>,
+			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
+			 <&uart1_ick>, <&uart1_fck>, <&uart2_ick>, <&uart2_fck>,
+			 <&uart3_ick>, <&uart3_fck>, <&cam_ick>,
+			 <&mailboxes_ick>, <&wdt4_ick>, <&wdt4_fck>,
+			 <&wdt3_ick>, <&wdt3_fck>, <&mspro_ick>, <&mspro_fck>,
+			 <&mmc_ick>, <&mmc_fck>, <&fac_ick>, <&fac_fck>,
+			 <&eac_ick>, <&eac_fck>, <&hdq_ick>, <&hdq_fck>,
+			 <&i2c1_ick>, <&i2c1_fck>, <&i2c2_ick>, <&i2c2_fck>,
+			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
+			 <&pka_ick>;
+	};
+};
+
+&func_96m_ck {
+	compatible = "fixed-factor-clock";
+	clocks = <&apll96_ck>;
+	clock-mult = <1>;
+	clock-div = <1>;
+};
+
+&dsp_div_fck {
+	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
+};
+
+&ssi_ssr_sst_div_fck {
+	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+};
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index 60c605de22dd..e83b0468080c 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -14,6 +14,32 @@
 	compatible = "ti,omap2420", "ti,omap2";
 
 	ocp {
+		prcm: prcm@48008000 {
+			compatible = "ti,omap2-prcm";
+			reg = <0x48008000 0x1000>;
+
+			prcm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prcm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@48000000 {
+			compatible = "ti,omap2-scrm";
+			reg = <0x48000000 0x1000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
 		counter32k: counter@48004000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x48004000 0x20>;
@@ -99,6 +125,7 @@
 			dmas = <&sdma 31>,
 			       <&sdma 32>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp2: mcbsp@48076000 {
@@ -112,6 +139,7 @@
 			dmas = <&sdma 33>,
 			       <&sdma 34>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		msdi1: mmc@4809c000 {
@@ -123,6 +151,14 @@
 			dma-names = "tx", "rx";
 		};
 
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>, <34>;
+			interrupt-names = "dsp", "iva";
+			ti,hwmods = "mailbox";
+		};
+
 		timer1: timer@48028000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x48028000 0x400>;
diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi
new file mode 100644
index 000000000000..805f75df1cf2
--- /dev/null
+++ b/arch/arm/boot/dts/omap2430-clocks.dtsi
@@ -0,0 +1,344 @@
+/*
+ * Device Tree Source for OMAP2430 clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&scrm_clocks {
+	mcbsp3_mux_fck: mcbsp3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		reg = <0x02e8>;
+	};
+
+	mcbsp3_fck: mcbsp3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
+	};
+
+	mcbsp4_mux_fck: mcbsp4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x02e8>;
+	};
+
+	mcbsp4_fck: mcbsp4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
+	};
+
+	mcbsp5_mux_fck: mcbsp5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x02e8>;
+	};
+
+	mcbsp5_fck: mcbsp5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
+	};
+};
+
+&prcm_clocks {
+	iva2_1_gate_ick: iva2_1_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0800>;
+	};
+
+	iva2_1_div_ick: iva2_1_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <5>;
+		ti,max-div = <3>;
+		reg = <0x0840>;
+		ti,index-starts-at-one;
+	};
+
+	iva2_1_ick: iva2_1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>;
+	};
+
+	mdm_gate_ick: mdm_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0c10>;
+	};
+
+	mdm_div_ick: mdm_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		reg = <0x0c40>;
+		ti,dividers = <0>, <1>, <0>, <0>, <4>, <0>, <6>, <0>, <0>, <9>;
+	};
+
+	mdm_ick: mdm_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mdm_gate_ick>, <&mdm_div_ick>;
+	};
+
+	mdm_osc_ck: mdm_osc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&osc_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0c00>;
+	};
+
+	mcbsp3_ick: mcbsp3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0214>;
+	};
+
+	mcbsp3_gate_fck: mcbsp3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <3>;
+		reg = <0x0204>;
+	};
+
+	mcbsp4_ick: mcbsp4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0214>;
+	};
+
+	mcbsp4_gate_fck: mcbsp4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x0204>;
+	};
+
+	mcbsp5_ick: mcbsp5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0214>;
+	};
+
+	mcbsp5_gate_fck: mcbsp5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <5>;
+		reg = <0x0204>;
+	};
+
+	mcspi3_ick: mcspi3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0214>;
+	};
+
+	mcspi3_fck: mcspi3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0204>;
+	};
+
+	icr_ick: icr_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0410>;
+	};
+
+	i2chs1_fck: i2chs1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2430-interface-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0204>;
+	};
+
+	i2chs2_fck: i2chs2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2430-interface-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0204>;
+	};
+
+	usbhs_ick: usbhs_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0214>;
+	};
+
+	mmchs1_ick: mmchs1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0214>;
+	};
+
+	mmchs1_fck: mmchs1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0204>;
+	};
+
+	mmchs2_ick: mmchs2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0214>;
+	};
+
+	mmchs2_fck: mmchs2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0204>;
+	};
+
+	gpio5_ick: gpio5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0214>;
+	};
+
+	gpio5_fck: gpio5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0204>;
+	};
+
+	mdm_intc_ick: mdm_intc_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0214>;
+	};
+
+	mmchsdb1_fck: mmchsdb1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x0204>;
+	};
+
+	mmchsdb2_fck: mmchsdb2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <17>;
+		reg = <0x0204>;
+	};
+};
+
+&prcm_clockdomains {
+	gfx_clkdm: gfx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gfx_ick>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_fck>, <&usb_fck>, <&usbhs_ick>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
+			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
+			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>,
+			 <&icr_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_ick>, <&dss_54m_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
+			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
+			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
+			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>, <&mcbsp5_ick>, <&mcspi1_ick>,
+			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
+			 <&mcspi3_ick>, <&mcspi3_fck>, <&uart1_ick>,
+			 <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, <&uart3_ick>,
+			 <&uart3_fck>, <&cam_ick>, <&mailboxes_ick>,
+			 <&wdt4_ick>, <&wdt4_fck>, <&mspro_ick>, <&mspro_fck>,
+			 <&fac_ick>, <&fac_fck>, <&hdq_ick>, <&hdq_fck>,
+			 <&i2c1_ick>, <&i2chs1_fck>, <&i2c2_ick>, <&i2chs2_fck>,
+			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
+			 <&pka_ick>, <&mmchs1_ick>, <&mmchs1_fck>,
+			 <&mmchs2_ick>, <&mmchs2_fck>, <&gpio5_ick>,
+			 <&gpio5_fck>, <&mdm_intc_ick>, <&mmchsdb1_fck>,
+			 <&mmchsdb2_fck>;
+	};
+
+	mdm_clkdm: mdm_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mdm_osc_ck>;
+	};
+};
+
+&func_96m_ck {
+	compatible = "ti,mux-clock";
+	clocks = <&apll96_ck>, <&alt_ck>;
+	ti,bit-shift = <4>;
+	reg = <0x0540>;
+};
+
+&dsp_div_fck {
+	ti,max-div = <4>;
+	ti,index-starts-at-one;
+};
+
+&ssi_ssr_sst_div_fck {
+	ti,max-div = <5>;
+	ti,index-starts-at-one;
+};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index d624345666f5..c4e8013801ee 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -14,6 +14,32 @@
 	compatible = "ti,omap2430", "ti,omap2";
 
 	ocp {
+		prcm: prcm@49006000 {
+			compatible = "ti,omap2-prcm";
+			reg = <0x49006000 0x1000>;
+
+			prcm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prcm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@49002000 {
+			compatible = "ti,omap2-scrm";
+			reg = <0x49002000 0x1000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
 		counter32k: counter@49020000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x49020000 0x20>;
@@ -29,6 +55,22 @@
 			pinctrl-single,function-mask = <0x3f>;
 		};
 
+		omap2_scm_general: tisyscon@49002270 {
+			compatible = "syscon";
+			reg = <0x49002270 0x240>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x230 0x4>;
+			syscon = <&omap2_scm_general>;
+			pbias_mmc_reg: pbias_mmc_omap2430 {
+				regulator-name = "pbias_mmc_omap2430";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		gpio1: gpio@4900c000 {
 			compatible = "ti,omap2-gpio";
 			reg = <0x4900c000 0x200>;
@@ -113,6 +155,7 @@
 			dmas = <&sdma 31>,
 			       <&sdma 32>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp2: mcbsp@48076000 {
@@ -128,6 +171,7 @@
 			dmas = <&sdma 33>,
 			       <&sdma 34>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp3: mcbsp@4808c000 {
@@ -143,6 +187,7 @@
 			dmas = <&sdma 17>,
 			       <&sdma 18>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp4: mcbsp@4808e000 {
@@ -158,6 +203,7 @@
 			dmas = <&sdma 19>,
 			       <&sdma 20>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp5: mcbsp@48096000 {
@@ -173,6 +219,7 @@
 			dmas = <&sdma 21>,
 			       <&sdma 22>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mmc1: mmc@4809c000 {
@@ -183,6 +230,7 @@
 			ti,dual-volt;
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
@@ -194,6 +242,13 @@
 			dma-names = "tx", "rx";
 		};
 
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+			ti,hwmods = "mailbox";
+		};
+
 		timer1: timer@49018000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x49018000 0x400>;
diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi
new file mode 100644
index 000000000000..a1365ca926eb
--- /dev/null
+++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi
@@ -0,0 +1,1244 @@
+/*
+ * Device Tree Source for OMAP24xx clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm_clocks {
+	mcbsp1_mux_fck: mcbsp1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x0274>;
+	};
+
+	mcbsp1_fck: mcbsp1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
+	};
+
+	mcbsp2_mux_fck: mcbsp2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <6>;
+		reg = <0x0274>;
+	};
+
+	mcbsp2_fck: mcbsp2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
+	};
+};
+
+&prcm_clocks {
+	func_32k_ck: func_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	secure_32k_ck: secure_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12m_ck: virt_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13m_ck: virt_13m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26m_ck: virt_26m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	aplls_clkin_ck: aplls_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x0540>;
+	};
+
+	aplls_clkin_x2_ck: aplls_clkin_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&aplls_clkin_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	osc_ck: osc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0060>;
+		ti,index-starts-at-one;
+	};
+
+	sys_ck: sys_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&osc_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x0060>;
+		ti,index-starts-at-one;
+	};
+
+	alt_ck: alt_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <54000000>;
+	};
+
+	mcbsp_clks: mcbsp_clks {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	dpll_ck: dpll_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0500>, <0x0540>;
+	};
+
+	apll96_ck: apll96_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-apll-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <2>;
+		ti,idlest-shift = <8>;
+		ti,clock-frequency = <96000000>;
+		reg = <0x0500>, <0x0530>, <0x0520>;
+	};
+
+	apll54_ck: apll54_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-apll-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		ti,idlest-shift = <9>;
+		ti,clock-frequency = <54000000>;
+		reg = <0x0500>, <0x0530>, <0x0520>;
+	};
+
+	func_54m_ck: func_54m_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&apll54_ck>, <&alt_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0540>;
+	};
+
+	core_ck: core_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	func_96m_ck: func_96m_ck {
+		#clock-cells = <0>;
+	};
+
+	apll96_d2_ck: apll96_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll96_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_48m_ck: func_48m_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&apll96_d2_ck>, <&alt_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0540>;
+	};
+
+	func_12m_ck: func_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&func_48m_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	sys_clkout_src_gate: sys_clkout_src_gate {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout_src_mux: sys_clkout_src_mux {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout_src: sys_clkout_src {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>;
+	};
+
+	sys_clkout: sys_clkout {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkout_src>;
+		ti,bit-shift = <3>;
+		ti,max-div = <64>;
+		reg = <0x0070>;
+		ti,index-power-of-two;
+	};
+
+	emul_ck: emul_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_54m_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0078>;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <31>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+	};
+
+	dsp_gate_fck: dsp_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0800>;
+	};
+
+	dsp_div_fck: dsp_div_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		reg = <0x0840>;
+	};
+
+	dsp_fck: dsp_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dsp_gate_fck>, <&dsp_div_fck>;
+	};
+
+	core_l3_ck: core_l3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <31>;
+		reg = <0x0240>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_3d_gate_fck: gfx_3d_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0300>;
+	};
+
+	gfx_3d_div_fck: gfx_3d_div_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,max-div = <4>;
+		reg = <0x0340>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_3d_fck: gfx_3d_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>;
+	};
+
+	gfx_2d_gate_fck: gfx_2d_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0300>;
+	};
+
+	gfx_2d_div_fck: gfx_2d_div_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,max-div = <4>;
+		reg = <0x0340>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_2d_fck: gfx_2d_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>;
+	};
+
+	gfx_ick: gfx_ick {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0310>;
+	};
+
+	l4_ck: l4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <5>;
+		ti,max-div = <3>;
+		reg = <0x0240>;
+		ti,index-starts-at-one;
+	};
+
+	dss_ick: dss_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0210>;
+	};
+
+	dss1_gate_fck: dss1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0200>;
+	};
+
+	core_d2_ck: core_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	core_d3_ck: core_d3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	core_d4_ck: core_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	core_d5_ck: core_d5_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <5>;
+	};
+
+	core_d6_ck: core_d6_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <6>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	core_d8_ck: core_d8_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	core_d9_ck: core_d9_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <9>;
+	};
+
+	core_d12_ck: core_d12_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <12>;
+	};
+
+	core_d16_ck: core_d16_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dss1_mux_fck: dss1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0240>;
+	};
+
+	dss1_fck: dss1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dss1_gate_fck>, <&dss1_mux_fck>;
+	};
+
+	dss2_gate_fck: dss2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0200>;
+	};
+
+	dss2_mux_fck: dss2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&func_48m_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x0240>;
+	};
+
+	dss2_fck: dss2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dss2_gate_fck>, <&dss2_mux_fck>;
+	};
+
+	dss_54m_fck: dss_54m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_54m_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0200>;
+	};
+
+	ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0204>;
+	};
+
+	ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0240>;
+	};
+
+	ssi_ssr_sst_fck: ssi_ssr_sst_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>;
+	};
+
+	usb_l4_gate_ick: usb_l4_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0214>;
+	};
+
+	usb_l4_div_ick: usb_l4_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x0240>;
+		ti,dividers = <0>, <1>, <2>, <0>, <4>;
+	};
+
+	usb_l4_ick: usb_l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0214>;
+	};
+
+	gpt1_ick: gpt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0410>;
+	};
+
+	gpt1_gate_fck: gpt1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0400>;
+	};
+
+	gpt1_mux_fck: gpt1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		reg = <0x0440>;
+	};
+
+	gpt1_fck: gpt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
+	};
+
+	gpt2_ick: gpt2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0210>;
+	};
+
+	gpt2_gate_fck: gpt2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0200>;
+	};
+
+	gpt2_mux_fck: gpt2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0244>;
+	};
+
+	gpt2_fck: gpt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
+	};
+
+	gpt3_ick: gpt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0210>;
+	};
+
+	gpt3_gate_fck: gpt3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0200>;
+	};
+
+	gpt3_mux_fck: gpt3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0244>;
+	};
+
+	gpt3_fck: gpt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
+	};
+
+	gpt4_ick: gpt4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0210>;
+	};
+
+	gpt4_gate_fck: gpt4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0200>;
+	};
+
+	gpt4_mux_fck: gpt4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0244>;
+	};
+
+	gpt4_fck: gpt4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
+	};
+
+	gpt5_ick: gpt5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0210>;
+	};
+
+	gpt5_gate_fck: gpt5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0200>;
+	};
+
+	gpt5_mux_fck: gpt5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0244>;
+	};
+
+	gpt5_fck: gpt5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
+	};
+
+	gpt6_ick: gpt6_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0210>;
+	};
+
+	gpt6_gate_fck: gpt6_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0200>;
+	};
+
+	gpt6_mux_fck: gpt6_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0244>;
+	};
+
+	gpt6_fck: gpt6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
+	};
+
+	gpt7_ick: gpt7_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0210>;
+	};
+
+	gpt7_gate_fck: gpt7_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0200>;
+	};
+
+	gpt7_mux_fck: gpt7_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0244>;
+	};
+
+	gpt7_fck: gpt7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
+	};
+
+	gpt8_ick: gpt8_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0210>;
+	};
+
+	gpt8_gate_fck: gpt8_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0200>;
+	};
+
+	gpt8_mux_fck: gpt8_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x0244>;
+	};
+
+	gpt8_fck: gpt8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
+	};
+
+	gpt9_ick: gpt9_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0210>;
+	};
+
+	gpt9_gate_fck: gpt9_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0200>;
+	};
+
+	gpt9_mux_fck: gpt9_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x0244>;
+	};
+
+	gpt9_fck: gpt9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
+	};
+
+	gpt10_ick: gpt10_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0210>;
+	};
+
+	gpt10_gate_fck: gpt10_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0200>;
+	};
+
+	gpt10_mux_fck: gpt10_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0244>;
+	};
+
+	gpt10_fck: gpt10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
+	};
+
+	gpt11_ick: gpt11_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x0210>;
+	};
+
+	gpt11_gate_fck: gpt11_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x0200>;
+	};
+
+	gpt11_mux_fck: gpt11_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0244>;
+	};
+
+	gpt11_fck: gpt11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
+	};
+
+	gpt12_ick: gpt12_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x0210>;
+	};
+
+	gpt12_gate_fck: gpt12_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x0200>;
+	};
+
+	gpt12_mux_fck: gpt12_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0244>;
+	};
+
+	gpt12_fck: gpt12_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>;
+	};
+
+	mcbsp1_ick: mcbsp1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0210>;
+	};
+
+	mcbsp1_gate_fck: mcbsp1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <15>;
+		reg = <0x0200>;
+	};
+
+	mcbsp2_ick: mcbsp2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x0210>;
+	};
+
+	mcbsp2_gate_fck: mcbsp2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <16>;
+		reg = <0x0200>;
+	};
+
+	mcspi1_ick: mcspi1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <17>;
+		reg = <0x0210>;
+	};
+
+	mcspi1_fck: mcspi1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <17>;
+		reg = <0x0200>;
+	};
+
+	mcspi2_ick: mcspi2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0210>;
+	};
+
+	mcspi2_fck: mcspi2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0200>;
+	};
+
+	uart1_ick: uart1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <21>;
+		reg = <0x0210>;
+	};
+
+	uart1_fck: uart1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <21>;
+		reg = <0x0200>;
+	};
+
+	uart2_ick: uart2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0210>;
+	};
+
+	uart2_fck: uart2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0200>;
+	};
+
+	uart3_ick: uart3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	uart3_fck: uart3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0204>;
+	};
+
+	gpios_ick: gpios_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0410>;
+	};
+
+	gpios_fck: gpios_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0400>;
+	};
+
+	mpu_wdt_ick: mpu_wdt_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0410>;
+	};
+
+	mpu_wdt_fck: mpu_wdt_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0400>;
+	};
+
+	sync_32k_ick: sync_32k_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0410>;
+	};
+
+	wdt1_ick: wdt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0410>;
+	};
+
+	omapctrl_ick: omapctrl_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0410>;
+	};
+
+	cam_fck: cam_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0200>;
+	};
+
+	cam_ick: cam_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0210>;
+	};
+
+	mailboxes_ick: mailboxes_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <30>;
+		reg = <0x0210>;
+	};
+
+	wdt4_ick: wdt4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0210>;
+	};
+
+	wdt4_fck: wdt4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0200>;
+	};
+
+	mspro_ick: mspro_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <27>;
+		reg = <0x0210>;
+	};
+
+	mspro_fck: mspro_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <27>;
+		reg = <0x0200>;
+	};
+
+	fac_ick: fac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x0210>;
+	};
+
+	fac_fck: fac_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x0200>;
+	};
+
+	hdq_ick: hdq_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x0210>;
+	};
+
+	hdq_fck: hdq_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x0200>;
+	};
+
+	i2c1_ick: i2c1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0210>;
+	};
+
+	i2c2_ick: i2c2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0210>;
+	};
+
+	gpmc_fck: gpmc_fck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <1>;
+		reg = <0x0238>;
+		ti,clock-mult = <1>;
+	};
+
+	sdma_fck: sdma_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sdma_ick: sdma_ick {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <0>;
+		reg = <0x0238>;
+		ti,clock-mult = <1>;
+	};
+
+	sdrc_ick: sdrc_ick {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <2>;
+		reg = <0x0238>;
+		ti,clock-mult = <1>;
+	};
+
+	des_ick: des_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x021c>;
+	};
+
+	sha_ick: sha_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x021c>;
+	};
+
+	rng_ick: rng_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+
+	aes_ick: aes_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x021c>;
+	};
+
+	pka_ick: pka_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x021c>;
+	};
+
+	usb_fck: usb_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0204>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts
new file mode 100644
index 000000000000..7ac3bcf59d59
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-beagle-xm.dts"
+
+/ {
+	/* HS USB Port 2 Power enable was inverted with the xM C */
+	hsusb2_power: hsusb2_power_reg {
+		enable-active-high;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 447e714d435b..cf0be662297e 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -24,6 +24,11 @@
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -86,6 +91,60 @@
 		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
 		vcc-supply = <&hsusb2_power>;
 	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+		/* XXX pinctrl from twl */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tv0: connector@1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
 };
 
 &omap3_pmx_wkup {
@@ -94,6 +153,17 @@
 			0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
 		>;
 	};
+
+	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+		>;
+	};
 };
 
 &omap3_pmx_core {
@@ -119,6 +189,35 @@
 			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
 		>;
 	};
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -164,15 +263,6 @@
 
 &i2c3 {
 	clock-frequency = <100000>;
-
-	/*
-	 * Display monitor features are burnt in the EEPROM
-	 * as EDID data.
-	 */
-	eeprom@50 {
-		compatible = "ti,eeprom";
-		reg = <0x50>;
-	};
 };
 
 &mmc1 {
@@ -234,3 +324,37 @@
 	regulator-max-microvolt = <1800000>;
 	regulator-always-on;
 };
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins1
+		&dss_dpi_pins2
+	>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 5053766d369b..3c3e6da1deac 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -24,6 +24,11 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pmu_stat {
@@ -80,6 +85,61 @@
 		};
 
 	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;	/* gpio_170 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tfp410_pins>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tv0: connector@1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
 };
 
 &omap3_pmx_wkup {
@@ -113,6 +173,45 @@
 			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			0x194 (PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -152,6 +251,10 @@
 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"
 
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
 &mmc1 {
 	vmmc-supply = <&vmmc1>;
 	vmmc_aux-supply = <&vsim>;
@@ -211,3 +314,39 @@
 	regulator-max-microvolt = <1800000>;
 	regulator-always-on;
 };
+
+&mcbsp2 {
+	status = "okay";
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
new file mode 100644
index 000000000000..d00502f4fd9b
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -0,0 +1,136 @@
+/*
+ * Support for CompuLab CM-T3517
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+#include "omap3-cm-t3x.dtsi"
+
+/ {
+	model = "CompuLab CM-T3517";
+	compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+	vmmc:  regulator-vmmc {
+                compatible = "regulator-fixed";
+                regulator-name = "vmmc";
+                regulator-min-microvolt = <3300000>;
+                regulator-max-microvolt = <3300000>;
+        };
+
+	wl12xx_vmmc2: wl12xx_vmmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vw1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+				&wl12xx_wkup_pins
+				&wl12xx_core_pins
+			    >;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH >; /* gpio6 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	wl12xx_vaux2: wl12xx_vaux2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271_vaux2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&omap3_pmx_wkup {
+
+	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE4)	/* sys_boot4.gpio_6 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+
+	phy1_reset_pins: pinmux_hsusb1_phy_reset_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE4)	/* uart2_tx.gpio_146 */
+		>;
+	};
+
+	phy2_reset_pins: pinmux_hsusb2_phy_reset_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217a, PIN_OUTPUT | MUX_MODE4)	/* uart2_rx.gpio_147 */
+		>;
+	};
+
+	otg_drv_vbus: pinmux_otg_drv_vbus {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	wl12xx_core_pins: pinmux_wl12xx_core_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs5.gpio_56 */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	usb_hub_pins: pinmux_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 - USB HUB RST */
+		>;
+	};
+};
+
+&hsusb1_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&phy1_reset_pins>;
+	reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&phy2_reset_pins>;
+	reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
+};
+
+&davinci_emac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
+&am35x_otg_hs {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&otg_drv_vbus>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&wl12xx_vmmc2>;
+	vmmc_aux-supply = <&wl12xx_vaux2>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts
new file mode 100644
index 000000000000..d1458496520e
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3530.dts
@@ -0,0 +1,48 @@
+/*
+ * Support for CompuLab CM-T3530
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-cm-t3x30.dtsi"
+
+/ {
+	model = "CompuLab CM-T3530";
+	compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+
+	/* Regulator to trigger the reset signal of the Wifi module */
+	mmc2_sdio_reset: regulator-mmc2-sdio-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-mmc2-sdio-reset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat4.sdmmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat5.sdmmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat6.sdmmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)		/* sdmmc2_dat7.sdmmc2_clkin */
+		>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&mmc2_sdio_reset>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 486f4d6c4219..b3f9a50b3bc8 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -32,57 +32,26 @@
 };
 
 &omap3_pmx_core {
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	smsc1_pins: pinmux_smsc1_pins {
-		pinctrl-single,pins = <
-			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ncs5.gpmc_ncs5 */
-			0x16a (PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_163 */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
 		>;
 	};
 
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0xb2 (PIN_OUTPUT | MUX_MODE4)		/* dss_data3.gpio_73 */
-			0x134 (PIN_INPUT | MUX_MODE4)		/* sdmmc2_dat4.gpio_136 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)	/* dss_data3.gpio_73 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 */
 		>;
 	};
 };
 
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
@@ -92,13 +61,3 @@
 	bus-width = <4>;
 	cap-power-off-card;
 };
-
-&smsc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&smsc1_pins>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
new file mode 100644
index 000000000000..c671a2299ea8
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Common support for CompuLab CM-T3x CoMs
+ */
+
+/ {
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&green_led_pins>;
+		ledb {
+			label = "cm-t3x:green";
+			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;  /* gpio186 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* HS USB Port 1 Power */
+	hsusb1_power: hsusb1_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&hsusb1_power>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&hsusb2_power>;
+	};
+};
+
+&omap3_pmx_core {
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT  | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	green_led_pins: pinmux_green_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4)	/* sys_clkout2.gpio_186 */
+		>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <4>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+&usbhshost {
+	port1-mode = "ehci-phy";
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy &hsusb2_phy>;
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
index 3a9f004d8924..25ba08331d88 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -1,81 +1,60 @@
 /*
- * Common support for CompuLab CM-T3530 and  CM-T3730
+ * Common support for CompuLab CM-T3x30 CoMs
  */
 
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
+#include "omap3-cm-t3x.dtsi"
 
+/ {
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vcc>;
 		};
 	};
+};
 
-	leds {
-		compatible = "gpio-leds";
-		ledb {
-			label = "cm-t35:green";
-			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;  /* gpio186 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
+&omap3_pmx_core {
 
-	vddvario: regulator-vddvario {
-		compatible = "regulator-fixed";
-		regulator-name = "vddvario";
-		regulator-always-on;
+	smsc1_pins: pinmux_smsc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs5.gpmc_ncs5 */
+			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_163 */
+		>;
 	};
 
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
+ 	hsusb0_pins: pinmux_hsusb0_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data0.hsusb2_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+		>;
 	};
 };
 
+#include "omap-gpmc-smsc911x.dtsi"
+
 &gpmc {
 	ranges = <5 0 0x2c000000 0x01000000>;
 
-	smsc1: ethernet@5,0 {
+	smsc1: ethernet@gpmc {
 		compatible = "smsc,lan9221", "smsc,lan9115";
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc1_pins>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		reg = <5 0 0xff>;
-		bank-width = <2>;
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
 	};
 };
 
 &i2c1 {
-	clock-frequency = <400000>;
-
 	twl: twl@48 {
 		reg = <0x48>;
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
@@ -86,10 +65,31 @@
 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"
 
-&i2c3 {
-	clock-frequency = <400000>;
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
 };
 
 &twl_gpio {
 	ti,use-leds;
+	/* pullups: BIT(0) */
+	ti,pullups = <0x000001>;
+};
+
+&hsusb1_phy {
+	reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+	reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb0_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
 };
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index 4665421bb7bc..da402f0fdab4 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -101,20 +101,8 @@
 	status = "disabled";
 };
 
-&mcbsp1 {
-	status = "disabled";
-};
-
-&mcbsp3 {
-	status = "disabled";
-};
-
-&mcbsp4 {
-	status = "disabled";
-};
-
-&mcbsp5 {
-	status = "disabled";
+&mcbsp2 {
+	status = "okay";
 };
 
 &gpmc {
@@ -124,7 +112,6 @@
 		reg = <0 0 0>; /* CS0, offset 0 */
 		nand-bus-width = <16>;
 
-		gpmc,device-nand;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index 4df68ad3736a..a8bd4349c7d2 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -26,7 +26,44 @@
 	};
 };
 
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins1
+		&dss_dpi_pins2
+	>;
+};
+
 &omap3_pmx_core {
+	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
+
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
 			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
@@ -75,6 +112,19 @@
 	};
 };
 
+&omap3_pmx_wkup {
+	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+		>;
+	};
+};
+
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
@@ -89,7 +139,16 @@
 	status = "disabled";
 };
 
+&uart1 {
+	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+};
+
 &uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
 };
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index 3007e79c9cd6..8ae8f007c8ad 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -44,6 +44,11 @@
 
 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"
+#include "omap3-panel-sharp-ls037v7dw01.dtsi"
+
+&backlight0 {
+	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
+};
 
 &i2c2 {
 	clock-frequency = <400000>;
@@ -61,6 +66,27 @@
 	};
 };
 
+&lcd_3v3 {
+	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
+	enable-active-low;
+};
+
+&lcd0 {
+	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
+	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
+	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
+		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
+		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 0>;		/* gpio175 */
+		pendown-gpio = <&gpio6 15 0>;
+	};
+};
+
 &mmc1 {
 	vmmc-supply = <&vmmc1>;
 	vmmc_aux-supply = <&vsim>;
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
index d3b253bbc885..021311f7964b 100644
--- a/arch/arm/boot/dts/omap3-gta04.dts
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -36,6 +36,44 @@
 			gpio-key,wakeup;
 		};
 	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "gta04";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
+	spi_lcd {
+		compatible = "spi-gpio";
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_gpio_pins>;
+
+		gpio-sck = <&gpio1 12 0>;
+		gpio-miso = <&gpio1 18 0>;
+		gpio-mosi = <&gpio1 20 0>;
+		cs-gpios = <&gpio1 19 0>;
+		num-chipselects = <1>;
+
+		/* lcd panel */
+		lcd: td028ttec1@0 {
+			compatible = "toppoly,td028ttec1";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+
+			label = "lcd";
+			port {
+				lcd_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+		};
+	};
 };
 
 &omap3_pmx_core {
@@ -70,6 +108,47 @@
 			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
 		>;
 	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+               pinctrl-single,pins = <
+                       0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+                       0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+                       0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+                       0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+                       0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+                       0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+                       0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+                       0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+                       0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+                       0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+                       0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+                       0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+                       0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+                       0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+                       0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+                       0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+                       0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+                       0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+                       0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+                       0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+                       0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+                       0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+                       0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+                       0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+                       0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+                       0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+                       0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+                       0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+               >;
+       };
+
+	spi_gpio_pins: spi_gpio_pinmux {
+		pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */
+			0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */
+			0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */
+			0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */
+		>;
+	};
 };
 
 &i2c1 {
@@ -80,6 +159,12 @@
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
 	};
+
+	twl_audio: audio {
+		compatible = "ti,twl4030-audio";
+		codec {
+		};
+	};
 };
 
 #include "twl4030.dtsi"
@@ -96,6 +181,14 @@
 		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
 	};
 
+	/* accelerometer */
+	bma180@41 {
+		compatible = "bosch,bma180";
+		reg = <0x41>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	/* leds */
 	tca6507@45 {
 		compatible = "ti,tca6507";
@@ -124,6 +217,22 @@
 			reg = <0x4>;
 		};
 	};
+
+	/* compass aka magnetometer */
+	hmc5843@1e {
+		compatible = "honeywell,hmc5843";
+		reg = <0x1e>;
+	};
+
+	/* touchscreen */
+	tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <600>;
+	};
 };
 
 &i2c3 {
@@ -148,7 +257,9 @@
 };
 
 &mmc2 {
-	status = "disabled";
+	vmmc-supply = <&vaux4>;
+	bus-width = <4>;
+	ti,non-removable;
 };
 
 &mmc3 {
@@ -170,3 +281,31 @@
 	pinctrl-0 = <&uart3_pins>;
 };
 
+&charger {
+	bb_uvolt = <3200000>;
+	bb_uamp = <150>;
+};
+
+&vaux4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3150000>;
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = < &dss_dpi_pins >;
+
+	status = "okay";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index c17009323520..e2d163bf0619 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -107,7 +107,7 @@
 		>;
 	};
 
-	smsc911x_pins: pinmux_smsc911x_pins {
+	smsc9221_pins: pinmux_smsc9221_pins {
 		pinctrl-single,pins = <
 			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
 		>;
@@ -170,6 +170,7 @@
 &mcbsp2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
 };
 
 &mmc1 {
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index f2779ac75872..b22caaaf774b 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -10,7 +10,7 @@
  */
 
 #include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc911x.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
 
 / {
 	model = "IGEPv2 (TI OMAP AM/DM37x)";
@@ -61,22 +61,63 @@
 		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
 		vcc-supply = <&hsusb1_power>;
 	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
 };
 
 &omap3_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
 		&tfp410_pins
-		&dss_pins
+		&dss_dpi_pins
 	>;
 
-	tfp410_pins: tfp410_dvi_pins {
+	tfp410_pins: pinmux_tfp410_pins {
 		pinctrl-single,pins = <
 			0x196 (PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
 		>;
 	};
 
-	dss_pins: pinmux_dss_dvi_pins {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
 		pinctrl-single,pins = <
 			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
 			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
@@ -207,7 +248,7 @@
 
 	ethernet@gpmc {
 		pinctrl-names = "default";
-		pinctrl-0 = <&smsc911x_pins>;
+		pinctrl-0 = <&smsc9221_pins>;
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
@@ -226,3 +267,14 @@
         /* Needed for DSS */
         regulator-name = "vdds_dsi";
 };
+
+&dss {
+	status = "ok";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index ddce0d807f70..af272c156e21 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -164,6 +164,11 @@
 
 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"
+#include "omap3-panel-sharp-ls037v7dw01.dtsi"
+
+&backlight0 {
+	gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+};
 
 &i2c2 {
 	clock-frequency = <400000>;
@@ -173,9 +178,40 @@
 	clock-frequency = <400000>;
 };
 
+/* tps61130rsa enabled by twl4030 regen */
+&lcd_3v3 {
+	regulator-always-on;
+};
+
+&lcd0 {
+	enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>;	/* lcd INI */
+	reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;	/* gpio55, lcd RESB */
+	mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;	/* gpio56, lcd MO */
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		interrupt-parent = <&gpio2>;
+		interrupts = <22 0>;		/* gpio54 */
+		pendown-gpio = <&gpio2 22 0>;
+	};
+};
+
 &mmc1 {
+	/* See 35xx errata 2.1.1.128 in SPRZ278F */
+	compatible = "ti,omap3-pre-es3-hsmmc";
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+	status="disabled";
+};
+
+&mmc3 {
+	status="disabled";
 };
 
 &omap3_pmx_core {
@@ -209,6 +245,21 @@
 			0x174 (PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
 		>;
 	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
+		>;
+	};
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 };
 
 &usb_otg_hs {
@@ -224,8 +275,3 @@
 	/* Needed for ads7846 */
         regulator-name = "vcc";
 };
-
-&vpll2 {
-       /* Needed for DSS */
-       regulator-name = "vdds_dsi";
-};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
new file mode 100644
index 000000000000..d97308896f0c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -0,0 +1,459 @@
+/*
+ * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "omap36xx.dtsi"
+
+/ {
+	model = "INCOstartec LILLY-A83X module (DM3730)";
+	compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
+
+	chosen {
+			bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;   /* 128 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "lilly-a83x::led1";
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "lilly-a83x";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
+	reg_vcc3: vcc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_vcc3>;
+	};
+};
+
+&omap3_pmx_wkup {
+	pinctrl-names = "default";
+
+	lan9221_pins: pinmux_lan9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_129 */
+		>;
+	};
+
+	tsc2048_pins: pinmux_tsc2048_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4)   /* sys_boot6.gpio_8 */
+		>;
+	};
+
+	mmc1cd_pins: pinmux_mmc1cd_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_126 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)   /* uart1_tx.uart1_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)   /* uart1_rts.uart1_rts */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)    /* uart1_cts.uart1_cts */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)    /* uart1_rx.uart1_rx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)   /* mcbsp3_clkx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)    /* mcbsp3_fsx.uart2_rx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)    /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)   /* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
+		>;
+	};
+
+	hsusb1_pins: pinmux_hsusb1_pins {
+		pinctrl-single,pins = <
+
+			/* GPIO 182 controls USB-Hub reset. But USB-Phy its
+			 * reset can't be controlled. So we clamp this GPIO to
+			 * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
+			 */
+
+			OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcspi2_cs1.gpio_182 */
+		>;
+	};
+
+	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)   /* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)  /* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)   /* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)   /* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)   /* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)   /* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)   /* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)   /* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)   /* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)   /* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)   /* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)   /* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	spi2_pins: pinmux_spi2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_clk.mcspi2_clk */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_simo.mcspi2_simo */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_somi.mcspi2_somi */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0)   /* mcspi2_cs0.mcspi2_cs0 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+
+	hsusb1_2_pins: pinmux_hsusb1_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)  /* etk_clk.hsusb1_stp */
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3)   /* etk_ctl.hsusb1_clk */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)   /* etk_d0.hsusb1_data0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)   /* etk_d1.hsusb1_data1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)   /* etk_d2.hsusb1_data2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)   /* etk_d3.hsusb1_data7 */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)   /* etk_d4.hsusb1_data4 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)   /* etk_d5.hsusb1_data5 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)   /* etk_d6.hsusb1_data6 */
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)   /* etk_d7.hsusb1_data3 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)   /* etk_d8.hsusb1_dir */
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)   /* etk_d9.hsusb1_nxt */
+		>;
+	};
+
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4)   /* etk_d15.gpio_29 */
+		>;
+	};
+
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};
+
+&gpio6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>;   /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+	vmmc1: regulator-vmmc1 {
+		regulator-always-on;
+	};
+
+	vdd1: regulator-vdd1 {
+		regulator-always-on;
+	};
+
+	vdd2: regulator-vdd2 {
+		regulator-always-on;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <2600000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+	clock-frequency = <2600000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+		gpiom1: gpio@20 {
+			compatible = "mcp,mcp23017";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x20>;
+		};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&mmc1 {
+	cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+	cd-inverted;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+
+	tsc2046@0 {
+		reg = <0>;   /* CS0 */
+		compatible = "ti,tsc2046";
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 0>;   /* boot6 / gpio_8 */
+		spi-max-frequency = <1000000>;
+		pendown-gpio = <&gpio1 8 0>;
+		vcc-supply = <&reg_vcc3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2048_pins>;
+
+		ti,x-min = <300>;
+		ti,x-max = <3000>;
+		ti,y-min = <600>;
+		ti,y-max = <3600>;
+		ti,x-plate-ohms = <80>;
+		ti,pressure-max = <255>;
+		ti,swap-xy;
+
+		linux,wakeup;
+	};
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
+&usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_2_pins>;
+	num-ports = <2>;
+	port1-mode = "ehci-phy";
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb_otg_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,
+		<7 0 0x15000000 0x01000000>;
+
+	nand@0,0 {
+		reg = <0 0 0x1000000>;
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		/* no elm on omap3 */
+
+		gpmc,mux-add-data = <0>;
+		gpmc,device-width = <2>;
+		gpmc,wait-pin = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,burst-length= <4>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <100>;
+		gpmc,cs-wr-off-ns = <100>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <100>;
+		gpmc,adv-wr-off-ns = <100>;
+		gpmc,oe-on-ns = <5>;
+		gpmc,oe-off-ns = <75>;
+		gpmc,we-on-ns = <5>;
+		gpmc,we-off-ns = <75>;
+		gpmc,rd-cycle-ns = <100>;
+		gpmc,wr-cycle-ns = <100>;
+		gpmc,access-ns = <60>;
+		gpmc,page-burst-access-ns = <5>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-delay-ns = <50>;
+		gpmc,wr-data-mux-bus-ns = <75>;
+		gpmc,wr-access-ns = <155>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "MLO";
+			reg = <0 0x80000>;
+		};
+
+		partition@0x80000 {
+			label = "u-boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		partition@0x260000 {
+			label = "u-boot-environment";
+			reg = <0x260000 0x20000>;
+		};
+
+		partition@0x280000 {
+			label = "kernel";
+			reg = <0x280000 0x500000>;
+		};
+
+		partition@0x780000 {
+			label = "filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+
+	ethernet@7,0 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <60>;
+		gpmc,cs-wr-off-ns = <60>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <60>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <60>;
+		gpmc,rd-cycle-ns = <100>;
+		gpmc,wr-cycle-ns = <100>;
+		gpmc,access-ns = <50>;
+		gpmc,page-burst-access-ns = <5>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wr-data-mux-bus-ns = <15>;
+		gpmc,wr-access-ns = <75>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vddvario-supply = <&reg_vcc3>;
+		vdd33a-supply = <&reg_vcc3>;
+		reg-io-width = <4>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 0x2>;
+		reg = <7 0 0xff>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9221_pins>;
+		phy-mode = "mii";
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
new file mode 100644
index 000000000000..834f7c65f62d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+/dts-v1/;
+
+#include "omap3-lilly-a83x.dtsi"
+
+/ {
+	model = "INCOstartec LILLY-DBB056 (DM3730)";
+	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
+};
+
+&twl {
+	vaux2: regulator-vaux2 {
+		compatible = "ti,twl4030-vaux2";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	lan9117_pins: pinmux_lan9117_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4)   /* cam_fld.gpio_98 */
+		>;
+	};
+
+	gpio4_pins: pinmux_gpio4_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4)   /* cam_xclkb.gpio_111 -> sja1000 IRQ */
+		>;
+	};
+
+	gpio5_pins: pinmux_gpio5_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218c, PIN_OUTPUT | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcbsp1_clk.gpio_156 -> enable DSS */
+		>;
+	};
+
+	lcd_pins: pinmux_lcd_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat4.sdmmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat5.sdmmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat6.sdmmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)    /* sdmmc2_dat7.sdmmc2_clkin */
+			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_cts_rctx.gpio_163 -> wp */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_rts_sd.gpio_164 -> cd */
+		>;
+	};
+
+	spi1_pins: pinmux_spi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)   /* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)   /* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)   /* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio4_pins>;
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio5_pins>;
+};
+
+&mmc2 {
+	status = "okay";
+	bus-width = <4>;
+	vmmc-supply = <&vmmc1>;
+	cd-gpios = <&gpio6 4 0>;   /* gpio_164 */
+	wp-gpios = <&gpio6 3 0>;   /* gpio_163 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	ti,dual-volt;
+};
+
+&mcspi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,   /* nand assigned by COM a83x */
+		<4 0 0x20000000 0x01000000>,
+		<7 0 0x15000000 0x01000000>;   /* eth assigend by COM a83x */
+
+	ethernet@4,0 {
+		compatible = "smsc,lan9117", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <65>;
+		gpmc,cs-wr-off-ns = <65>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <65>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <65>;
+		gpmc,rd-cycle-ns = <100>;
+		gpmc,wr-cycle-ns = <100>;
+		gpmc,access-ns = <60>;
+		gpmc,page-burst-access-ns = <5>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wr-data-mux-bus-ns = <15>;
+		gpmc,wr-access-ns = <75>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vddvario-supply = <&reg_vcc3>;
+		vdd33a-supply = <&reg_vcc3>;
+		reg-io-width = <4>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <2 0x2>;
+		reg = <4 0 0xff>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9117_pins>;
+		phy-mode = "mii";
+		smsc,force-internal-phy;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 0bf40c90faba..ae8ae3f4f9bf 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -10,6 +10,7 @@
 /dts-v1/;
 
 #include "omap34xx-hs.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Nokia N900";
@@ -21,6 +22,17 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "debug::sleep";
+			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* gpio162 */
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&debug_leds>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
@@ -74,6 +86,35 @@
 		};
 	};
 
+	isp1704: isp1704 {
+		compatible = "nxp,isp1704";
+		nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		usb-phy = <&usb2_phy>;
+	};
+
+	tv: connector {
+		compatible = "composite-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+
+	sound: n900-audio {
+		compatible = "nokia,n900-audio";
+
+		nokia,cpu-dai = <&mcbsp2>;
+		nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
+		nokia,headphone-amplifier = <&tpa6130a2>;
+
+		tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
+		jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
+		eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
+		speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &omap3_pmx_core {
@@ -114,6 +155,21 @@
 		>;
 	};
 
+	debug_leds: pinmux_debug_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 */
+		>;
+	};
+
+	mcspi4_pins: pinmux_mcspi4_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+			0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+			0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+		>;
+	};
+
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
 			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
@@ -140,11 +196,54 @@
 		>;
 	};
 
-	display_pins: pinmux_display_pins {
+	acx565akm_pins: pinmux_acx565akm_pins {
 		pinctrl-single,pins = <
 			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
 		>;
 	};
+
+	dss_sdi_pins: pinmux_dss_sdi_pins {
+		pinctrl-single,pins = <
+			0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
+			0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
+			0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
+			0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
+
+			0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
+			0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
+		>;
+	};
+
+	wl1251_pins: pinmux_wl1251 {
+		pinctrl-single,pins = <
+			0x0ce (PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
+			0x05a (PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
+		>;
+	};
+
+	ssi_pins: pinmux_ssi {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
+			0x14e (PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
+			0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+			0x14c (PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
+			0x154 (PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
+			0x156 (PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
+			0x158 (PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
+			0x15a (PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
+		>;
+	};
+
+	modem_pins: pinmux_modem {
+		pinctrl-single,pins = <
+			0x0ac (PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
+			0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
+			0x0b2 (PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
+			0x0b4 (PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
+			0x0b6 (PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
+			0x15e (PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
+		>;
+	};
 };
 
 &i2c1 {
@@ -254,6 +353,61 @@
 	};
 };
 
+&twl_keypad {
+	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
+			 MATRIX_KEY(0x00, 0x01, KEY_O)
+			 MATRIX_KEY(0x00, 0x02, KEY_P)
+			 MATRIX_KEY(0x00, 0x03, KEY_COMMA)
+			 MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
+			 MATRIX_KEY(0x00, 0x06, KEY_A)
+			 MATRIX_KEY(0x00, 0x07, KEY_S)
+
+			 MATRIX_KEY(0x01, 0x00, KEY_W)
+			 MATRIX_KEY(0x01, 0x01, KEY_D)
+			 MATRIX_KEY(0x01, 0x02, KEY_F)
+			 MATRIX_KEY(0x01, 0x03, KEY_G)
+			 MATRIX_KEY(0x01, 0x04, KEY_H)
+			 MATRIX_KEY(0x01, 0x05, KEY_J)
+			 MATRIX_KEY(0x01, 0x06, KEY_K)
+			 MATRIX_KEY(0x01, 0x07, KEY_L)
+
+			 MATRIX_KEY(0x02, 0x00, KEY_E)
+			 MATRIX_KEY(0x02, 0x01, KEY_DOT)
+			 MATRIX_KEY(0x02, 0x02, KEY_UP)
+			 MATRIX_KEY(0x02, 0x03, KEY_ENTER)
+			 MATRIX_KEY(0x02, 0x05, KEY_Z)
+			 MATRIX_KEY(0x02, 0x06, KEY_X)
+			 MATRIX_KEY(0x02, 0x07, KEY_C)
+			 MATRIX_KEY(0x02, 0x08, KEY_F9)
+
+			 MATRIX_KEY(0x03, 0x00, KEY_R)
+			 MATRIX_KEY(0x03, 0x01, KEY_V)
+			 MATRIX_KEY(0x03, 0x02, KEY_B)
+			 MATRIX_KEY(0x03, 0x03, KEY_N)
+			 MATRIX_KEY(0x03, 0x04, KEY_M)
+			 MATRIX_KEY(0x03, 0x05, KEY_SPACE)
+			 MATRIX_KEY(0x03, 0x06, KEY_SPACE)
+			 MATRIX_KEY(0x03, 0x07, KEY_LEFT)
+
+			 MATRIX_KEY(0x04, 0x00, KEY_T)
+			 MATRIX_KEY(0x04, 0x01, KEY_DOWN)
+			 MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
+			 MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
+			 MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
+			 MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
+			 MATRIX_KEY(0x04, 0x08, KEY_F10)
+
+			 MATRIX_KEY(0x05, 0x00, KEY_Y)
+			 MATRIX_KEY(0x05, 0x08, KEY_F11)
+
+			 MATRIX_KEY(0x06, 0x00, KEY_U)
+
+			 MATRIX_KEY(0x07, 0x00, KEY_I)
+			 MATRIX_KEY(0x07, 0x01, KEY_F7)
+			 MATRIX_KEY(0x07, 0x02, KEY_F8)
+			 >;
+};
+
 &twl_gpio {
 	ti,pullups	= <0x0>;
 	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
@@ -291,6 +445,13 @@
 		DVDD-supply = <&vio>;
 	};
 
+	tsl2563: tsl2563@29 {
+		compatible = "amstaos,tsl2563";
+		reg = <0x29>;
+
+		amstaos,cover-comp-gain = <16>;
+	};
+
 	lp5523: lp5523@32 {
 		compatible = "national,lp5523";
 		reg = <0x32>;
@@ -356,6 +517,29 @@
 		compatible = "ti,bq27200";
 		reg = <0x55>;
 	};
+
+	tpa6130a2: tpa6130a2@60 {
+		compatible = "ti,tpa6130a2";
+		reg = <0x60>;
+
+		Vdd-supply = <&vmmc2>;
+
+		power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
+	};
+
+	bq24150a: bq24150a@6b {
+		compatible = "ti,bq24150a";
+		reg = <0x6b>;
+
+		ti,current-limit = <100>;
+		ti,weak-battery-voltage = <3400>;
+		ti,battery-regulation-voltage = <4200>;
+		ti,charge-current = <650>;
+		ti,termination-current = <100>;
+		ti,resistor-sense = <68>;
+
+		ti,usb-charger-detection = <&isp1704>;
+	};
 };
 
 &i2c3 {
@@ -467,17 +651,66 @@
 	 * Also... order in the device tree actually matters here.
 	 */
 	tsc2005@0 {
-		compatible = "tsc2005";
+		compatible = "ti,tsc2005";
 		spi-max-frequency = <6000000>;
 		reg = <0>;
+
+		vio-supply = <&vio>;
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-max-x = <4096>;
+		touchscreen-max-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
 	};
-	mipid@2 {
-		compatible = "acx565akm";
+
+	acx565akm@2 {
+		compatible = "sony,acx565akm";
 		spi-max-frequency = <6000000>;
 		reg = <2>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&display_pins>;
+		pinctrl-0 = <&acx565akm_pins>;
+
+		label = "lcd";
+		reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&sdi_out>;
+			};
+		};
+	};
+};
+
+&mcspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi4_pins>;
+
+	wl1251@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl1251_pins>;
+
+		vio-supply = <&vio>;
+
+		compatible = "ti,wl1251";
+		reg = <0>;
+		spi-max-frequency = <48000000>;
+
+		spi-cpol;
+		spi-cpha;
+
+		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
 	};
 };
 
@@ -495,11 +728,94 @@
 };
 
 &uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
 };
 
 &uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
 };
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_sdi_pins>;
+
+	vdds_sdi-supply = <&vaux1>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			sdi_out: endpoint {
+				remote-endpoint = <&lcd_in>;
+				datapairs = <2>;
+			};
+		};
+	};
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <1>;
+		};
+	};
+};
+
+&mcbsp2 {
+	status = "ok";
+};
+
+&ssi_port1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssi_pins>;
+
+	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+
+	modem: hsi-client {
+		compatible = "nokia,n900-modem";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&modem_pins>;
+
+		hsi-channel-ids = <0>, <1>, <2>, <3>;
+		hsi-channel-names = "mcsaab-control",
+				    "speech-control",
+				    "speech-data",
+				    "mcsaab-data";
+		hsi-speed-kbps = <55000>;
+		hsi-mode = "frame";
+		hsi-flow = "synchronized";
+		hsi-arb-mode = "round-robin";
+
+		interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
+
+		gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
+			<&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
+			<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
+			<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
+			<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
+		gpio-names = "cmt_apeslpx",
+			     "cmt_rst_rq",
+			     "cmt_en",
+			     "cmt_rst",
+			     "cmt_bsi";
+	};
+};
+
+&ssi_port2 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 5c26c184f2c1..70addcba37c5 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -67,6 +67,20 @@
 	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
 };
 
+/* CSI-2 receiver */
+&vaux2 {
+	regulator-name = "vaux2";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+/* Cameras */
+&vaux3 {
+	regulator-name = "vaux3";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
 &i2c2 {
 	clock-frequency = <400000>;
 };
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
new file mode 100644
index 000000000000..7aae8fb82c1f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd35.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		gpio148 {
+			label = "overo:red:gpio148";
+			gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>;		/* gpio 148 */
+		};
+		gpio150 {
+			label = "overo:yellow:gpio150";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;		/* gpio 150 */
+		};
+		gpio151 {
+			label = "overo:blue:gpio151";
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;		/* gpio 151 */
+		};
+		gpio170 {
+			label = "overo:green:gpio170";
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;		/* gpio 170 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		button0@10 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;		/* gpio_10 */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&omap3_pmx_core {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE4)	/* uart1_tx.gpio_148 */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)	/* uart1_cts.gpio_150 */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_OUTPUT | MUX_MODE4)	/* uart1_rx.gpio_151 */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a18, PIN_INPUT | MUX_MODE4)		/* sys_clkout1.gpio_10 */
+		>;
+	};
+};
+
+&usbhshost {
+	status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-alto35.dts b/arch/arm/boot/dts/omap3-overo-alto35.dts
new file mode 100644
index 000000000000..a3249eb7501d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-alto35.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-alto35-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Alto35";
+	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
new file mode 100644
index 000000000000..d36bf0250a05
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The Gumstix Overo must be combined with an expansion board.
+ */
+
+/ {
+	pwmleds {
+		compatible = "pwm-leds";
+
+		overo {
+			label = "overo:blue:COM";
+			pwms = <&twl_pwmled 1 7812500>;
+			max-brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "overo";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio6 8 0>;				/* gpio_168: vbus enable */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;	/* gpio_183 */
+		vcc-supply = <&hsusb2_power>;
+	};
+
+	/* Regulator to trigger the nPoweron signal of the Wifi module */
+	w3cbw003c_npoweron: regulator-w3cbw003c-npoweron {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-w3cbw003c-npoweron";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;		/* gpio_54: nPoweron */
+		enable-active-high;
+	};
+
+	/* Regulator to trigger the nReset signal of the Wifi module */
+	w3cbw003c_wifi_nreset: regulator-w3cbw003c-wifi-nreset {
+		pinctrl-names = "default";
+		pinctrl-0 = <&w3cbw003c_pins &w3cbw003c_2_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-w3cbw003c-wifi-nreset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;		/* gpio_16: WiFi nReset */
+		startup-delay-us = <10000>;
+	};
+
+	/* Regulator to trigger the nReset signal of the Bluetooth module */
+	w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-w3cbw003c-bt-nreset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;		/* gpio_164: BT nReset */
+		startup-delay-us = <10000>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_pins
+	>;
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_clk.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)	/* mcbsp3_fsx.uart2_rx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	/* WiFi/BT combo */
+	w3cbw003c_pins: pinmux_w3cbw003c_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)		/* gpmc_ncs3.gpio_54 */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)		/* uart3_rts_sd.gpio_164 */
+		>;
+	};
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)		/* i2c2_scl.gpio_168 */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_OUTPUT | MUX_MODE4)		/* i2c2_sda.gpio_183 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+/* i2c2 pins are used for gpio */
+&i2c2 {
+	status = "disabled";
+};
+
+/* on board microSD slot */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+};
+
+/* optional on board WiFi */
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&w3cbw003c_npoweron>;
+	vqmmc-supply = <&w3cbw003c_bt_nreset>;
+	vmmc_aux-supply = <&w3cbw003c_wifi_nreset>;
+	bus-width = <4>;
+	cap-sdio-irq;
+	non-removable;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
new file mode 100644
index 000000000000..17b82f82638a
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@23 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			gpio-key,wakeup;
+		};
+		button1@14 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
+
+	ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-chestnut43.dts
new file mode 100644
index 000000000000..fe0824aca3c0
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-chestnut43-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Chestnut43";
+	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
new file mode 100644
index 000000000000..802f704f67e5
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * DVI output for some Gumstix Overo boards (Tobi and Summit)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &dvi0;
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
new file mode 100644
index 000000000000..233c69e50ae3
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lb035_pins: pinmux_lb035_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
+
+		default-on;
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	lcd0: display@0 {
+		compatible = "lgphilips,lb035q02";
+		label = "lcd";
+
+		reg = <1>;					/* CS1 */
+		spi-max-frequency = <10000000>;
+		spi-cpol;
+		spi-cpha;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lb035_pins>;
+		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;	/* gpio_144 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 0>;			/* gpio_114 */
+		pendown-gpio = <&gpio4 18 0>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		linux,wakeup;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
new file mode 100644
index 000000000000..f5395b7da912
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lte430_pins: pinmux_lte430_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	lcd0: display@0 {
+		compatible = "samsung,lte430wq-f0c", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lte430_pins>;
+		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;		/* gpio_144 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9200000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <8>;
+			hback-porch = <4>;
+			hsync-len = <41>;
+			vback-porch = <2>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
+
+		default-on;
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 0>;			/* gpio_114 */
+		pendown-gpio = <&gpio4 18 0>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		linux,wakeup;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi
new file mode 100644
index 000000000000..5831bcc52966
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Peripherals common to all Gumstix Overo boards (Tobi, Summit, Palo43,...)
+ */
+
+/ {
+	lis33_3v3: lis33-3v3-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "lis33-3v3-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lis33_1v8: lis33-1v8-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "lis33-1v8-reg";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&omap3_pmx_core {
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+
+	/* optional 1K EEPROM with revision information */
+	eeprom@51 {
+		compatible = "atmel,24c01";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+
+	lis33de: lis33de@1d {
+		compatible = "st,lis33de", "st,lis3lv02d";
+		reg = <0x1d>;
+		Vdd-supply = <&lis33_1v8>;
+		Vdd_IO-supply = <&lis33_3v3>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
new file mode 100644
index 000000000000..49d2254a99b0
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@23 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			gpio-key,wakeup;
+		};
+		button1@14 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&usbhshost {
+	status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43.dts b/arch/arm/boot/dts/omap3-overo-gallop43.dts
new file mode 100644
index 000000000000..241f5c1914e0
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-gallop43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-gallop43-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Gallop43";
+	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
new file mode 100644
index 000000000000..087aedf5b902
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@23 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			gpio-key,wakeup;
+		};
+		button1@14 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			gpio-key,wakeup;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-palo43.dts b/arch/arm/boot/dts/omap3-overo-palo43.dts
new file mode 100644
index 000000000000..cedb103b4b66
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-palo43-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Palo43";
+	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
new file mode 100644
index 000000000000..e9cae52afc25
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-alto35-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35";
+	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
new file mode 100644
index 000000000000..7d82fdfd9909
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-chestnut43-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43";
+	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
new file mode 100644
index 000000000000..a1b57e0cf37f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-gallop43-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43";
+	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
new file mode 100644
index 000000000000..b585d8fbc347
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-palo43-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43";
+	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts
new file mode 100644
index 000000000000..a0d7fd8369d7
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-summit-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit";
+	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
index 966b5c9cd96a..879383acad87 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
@@ -12,7 +12,7 @@
 
 /dts-v1/;
 
-#include "omap36xx.dtsi"
+#include "omap3-overo-storm.dtsi"
 #include "omap3-overo-tobi-common.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/omap3-overo-storm.dtsi b/arch/arm/boot/dts/omap3-overo-storm.dtsi
new file mode 100644
index 000000000000..6cb418b4124a
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm.dtsi
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap36xx.dtsi"
+#include "omap3-overo-base.dtsi"
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+
+	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
new file mode 100644
index 000000000000..0ac97ba98549
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-dvi.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-summit.dts b/arch/arm/boot/dts/omap3-overo-summit.dts
new file mode 100644
index 000000000000..69765609455a
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-summit.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-summit-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Summit";
+	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
index 4edc013a91c1..9e24b6a1d07b 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -10,7 +10,8 @@
  * Tobi expansion board is manufactured by Gumstix Inc.
  */
 
-#include "omap3-overo.dtsi"
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-dvi.dtsi"
 
 / {
 	leds {
@@ -21,60 +22,21 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
-
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
 };
 
+#include "omap-gpmc-smsc9221.dtsi"
+
 &gpmc {
 	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
 
-	ethernet@5,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
+	ethernet@gpmc {
 		reg = <5 0 0xff>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <42>;
-		gpmc,cs-wr-off-ns = <36>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <12>;
-		gpmc,adv-wr-off-ns = <12>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <42>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <36>;
-		gpmc,rd-cycle-ns = <60>;
-		gpmc,wr-cycle-ns = <54>;
-		gpmc,access-ns = <36>;
-		gpmc,page-burst-access-ns = <0>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <18>;
-		gpmc,wr-access-ns = <42>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
 		interrupt-parent = <&gpio6>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
-		reg-io-width = <4>;
 	};
 };
 
-&i2c3 {
-	clock-frequency = <100000>;
-};
-
-&mmc3 {
+&lis33de {
 	status = "disabled";
 };
+
diff --git a/arch/arm/boot/dts/omap3-overo-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi.dts
index de5653e1b5ca..fd6400efcdee 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi.dts
+++ b/arch/arm/boot/dts/omap3-overo-tobi.dts
@@ -12,7 +12,7 @@
 
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "omap3-overo.dtsi"
 #include "omap3-overo-tobi-common.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index 597099907f8e..69ca7c45bca2 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -1,94 +1,38 @@
 /*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-/*
- * The Gumstix Overo must be combined with an expansion board.
- */
+#include "omap34xx.dtsi"
+#include "omap3-overo-base.dtsi"
 
-/ {
-	pwmleds {
-		compatible = "pwm-leds";
-
-		overo {
-			label = "overo:blue:COM";
-			pwms = <&twl_pwmled 1 7812500>;
-			max-brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "overo";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
 
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
 	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-/* i2c2 pins are used for gpio */
-&i2c2 {
-	status = "disabled";
-};
 
-/* on board microSD slot */
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-};
-
-/* optional on board WiFi */
-&mmc2 {
-	bus-width = <4>;
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&omap3_pmx_core {
-	uart3_pins: pinmux_uart3_pins {
+	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
 		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
 		>;
 	};
 };
 
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
+&mcbsp2 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
new file mode 100644
index 000000000000..f4b1a61853e3
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -0,0 +1,71 @@
+/*
+ * Common file for omap dpi panels with QVGA and reset pins
+ *
+ * Note that the board specifc DTS file needs to specify
+ * at minimum the GPIO enable-gpios for display, and
+ * gpios for gpio-backlight.
+ */
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	backlight0: backlight {
+		compatible = "gpio-backlight";
+		default-on;
+	};
+
+	/* 3.3V GPIO controlled regulator for LCD_ENVDD */
+	lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	lcd0: display {
+		compatible = "sharp,ls037v7dw01";
+		label = "lcd";
+		power-supply = <&lcd_3v3>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <18>;
+		};
+	};
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		reg = <0>;			/* CS0 */
+		compatible = "ti,tsc2046";
+		spi-max-frequency = <1000000>;
+		vcc-supply = <&lcd_3v3>;
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <8000>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <4800>;
+		ti,x-plate-ohms = /bits/ 16 <40>;
+		ti,pressure-max = /bits/ 16 <255>;
+		ti,swap-xy;
+		linux,wakeup;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
index b9a2fedce7ee..d59e3de1441e 100644
--- a/arch/arm/boot/dts/omap3-sb-t35.dtsi
+++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi
@@ -2,21 +2,31 @@
  * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
  */
 
+&omap3_pmx_core {
+	smsc2_pins: pinmux_smsc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs4.gpmc_ncs4 */
+			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_wait3.gpio_65 */
+		>;
+	};
+};
+
 &gpmc {
 	ranges = <4 0 0x2d000000 0x01000000>;
 
 	smsc2: ethernet@4,0 {
 		compatible = "smsc,lan9221", "smsc,lan9115";
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc2_pins>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 		reg = <4 0 0xff>;
 		bank-width = <2>;
 		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
+		gpmc,cs-on-ns = <1>;
+		gpmc,cs-rd-off-ns = <180>;
+		gpmc,cs-wr-off-ns = <180>;
+		gpmc,adv-rd-off-ns = <18>;
 		gpmc,adv-wr-off-ns = <48>;
 		gpmc,oe-on-ns = <54>;
 		gpmc,oe-off-ns = <168>;
@@ -24,12 +34,10 @@
 		gpmc,we-off-ns = <168>;
 		gpmc,rd-cycle-ns = <186>;
 		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
+		gpmc,access-ns = <144>;
+		gpmc,page-burst-access-ns = <24>;
+		gpmc,bus-turnaround-ns = <90>;
+		gpmc,cycle2cycle-delay-ns = <90>;
 		gpmc,cycle2cycle-samecsen;
 		gpmc,cycle2cycle-diffcsen;
 		vddvario-supply = <&vddvario>;
diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts
new file mode 100644
index 000000000000..42189b65d393
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts
@@ -0,0 +1,56 @@
+/*
+ * Suppport for CompuLab SBC-T3517 with CM-T3517
+ */
+
+#include "omap3-cm-t3517.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+	model = "CompuLab SBC-T3517 with CM-T3517";
+	compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+	/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
+	vddvario: regulator-vddvario-sb-t35 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a-sb-t35 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&sb_t35_usb_hub_pins
+			&usb_hub_pins
+		    >;
+
+	mmc1_aux_pins: pinmux_mmc1_aux_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59   */
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
+		>;
+	};
+
+	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&mmc1_pins
+		&mmc1_aux_pins
+	>;
+
+	wp-gpios =  <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
+	cd-gpios =  <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
+};
diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts
new file mode 100644
index 000000000000..bbbeea6b1988
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts
@@ -0,0 +1,36 @@
+/*
+ * Suppport for CompuLab SBC-T3530 with CM-T3530
+ */
+
+#include "omap3-cm-t3530.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+	model = "CompuLab SBC-T3530 with CM-T3530";
+	compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sb_t35_usb_hub_pins>;
+
+	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
+		>;
+	};
+};
+
+/*
+ * The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and
+ * SB-T35 baseboard respectively.
+ * This setting includes both chips in SBC-T3530 board device tree.
+ */
+&gpmc {
+	ranges = <5 0 0x2c000000 0x01000000>,
+		 <4 0 0x2d000000 0x01000000>;
+};
+
+&mmc1 {
+	cd-gpios =  <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts
index c119bd545053..08e4a7086f22 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3730.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts
@@ -10,21 +10,18 @@
 	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
 };
 
-&gpmc {
-	ranges = <5 0 0x2c000000 0x01000000>,
-		 <4 0 0x2d000000 0x01000000>;
-};
-
-&smsc2 {
+&omap3_pmx_core {
 	pinctrl-names = "default";
-	pinctrl-0 = <&smsc2_pins>;
-};
+	pinctrl-0 = <&sb_t35_usb_hub_pins>;
 
-&omap3_pmx_core {
-	smsc2_pins: pinmux_smsc2_pins {
+	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
 		pinctrl-single,pins = <
-			0x86 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ncs4.gpmc_ncs4 */
-			0xa2 (PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_wait3.gpio_65 */
+			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
 		>;
 	};
-};
\ No newline at end of file
+};
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x01000000>,
+		 <4 0 0x2d000000 0x01000000>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index a5fc83b9c835..b2891a9a6975 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -35,6 +35,11 @@
 			compatible = "arm,cortex-a8";
 			device_type = "cpu";
 			reg = <0x0>;
+
+			clocks = <&dpll1_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 
@@ -56,7 +61,7 @@
 			ti,hwmods = "mpu";
 		};
 
-		iva {
+		iva: iva {
 			compatible = "ti,iva2.2";
 			ti,hwmods = "iva";
 
@@ -69,7 +74,7 @@
 	/*
 	 * XXX: Use a flat representation of the OMAP3 interconnect.
 	 * The real OMAP interconnect network is quite complex.
-	 * Since that will not bring real advantage to represent that in DT for
+	 * Since it will not bring real advantage to represent that in DT for
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */
@@ -176,6 +181,22 @@
 			pinctrl-single,function-mask = <0xff1f>;
 		};
 
+		omap3_scm_general: tisyscon@48002270 {
+			compatible = "syscon";
+			reg = <0x48002270 0x2f0>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x2b0 0x4>;
+			syscon = <&omap3_scm_general>;
+			pbias_mmc_reg: pbias_mmc_omap2430 {
+				regulator-name = "pbias_mmc_omap2430";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		gpio1: gpio@48310000 {
 			compatible = "ti,omap3-gpio";
 			reg = <0x48310000 0x200>;
@@ -246,7 +267,7 @@
 		uart1: serial@4806a000 {
 			compatible = "ti,omap3-uart";
 			reg = <0x4806a000 0x2000>;
-			interrupts = <72>;
+			interrupts-extended = <&intc 72>;
 			dmas = <&sdma 49 &sdma 50>;
 			dma-names = "tx", "rx";
 			ti,hwmods = "uart1";
@@ -256,7 +277,7 @@
 		uart2: serial@4806c000 {
 			compatible = "ti,omap3-uart";
 			reg = <0x4806c000 0x400>;
-			interrupts = <73>;
+			interrupts-extended = <&intc 73>;
 			dmas = <&sdma 51 &sdma 52>;
 			dma-names = "tx", "rx";
 			ti,hwmods = "uart2";
@@ -266,7 +287,7 @@
 		uart3: serial@49020000 {
 			compatible = "ti,omap3-uart";
 			reg = <0x49020000 0x400>;
-			interrupts = <74>;
+			interrupts-extended = <&intc 74>;
 			dmas = <&sdma 53 &sdma 54>;
 			dma-names = "tx", "rx";
 			ti,hwmods = "uart3";
@@ -390,6 +411,7 @@
 			ti,dual-volt;
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
@@ -411,10 +433,19 @@
 		};
 
 		mmu_isp: mmu@480bd400 {
-			compatible = "ti,omap3-mmu-isp";
-			ti,hwmods = "mmu_isp";
+			compatible = "ti,omap2-iommu";
 			reg = <0x480bd400 0x80>;
-			interrupts = <8>;
+			interrupts = <24>;
+			ti,hwmods = "mmu_isp";
+			ti,#tlb-entries = <8>;
+		};
+
+		mmu_iva: mmu@5d000000 {
+			compatible = "ti,omap2-iommu";
+			reg = <0x5d000000 0x80>;
+			interrupts = <28>;
+			ti,hwmods = "mmu_iva";
+			status = "disabled";
 		};
 
 		wdt2: wdt@48314000 {
@@ -436,6 +467,7 @@
 			dmas = <&sdma 31>,
 			       <&sdma 32>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp2: mcbsp@49022000 {
@@ -453,6 +485,7 @@
 			dmas = <&sdma 33>,
 			       <&sdma 34>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp3: mcbsp@49024000 {
@@ -470,6 +503,7 @@
 			dmas = <&sdma 17>,
 			       <&sdma 18>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp4: mcbsp@49026000 {
@@ -485,6 +519,7 @@
 			dmas = <&sdma 19>,
 			       <&sdma 20>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp5: mcbsp@48096000 {
@@ -500,6 +535,7 @@
 			dmas = <&sdma 21>,
 			       <&sdma 22>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		sham: sham@480c3000 {
@@ -634,14 +670,14 @@
 			ranges;
 
 			usbhsohci: ohci@48064400 {
-				compatible = "ti,ohci-omap3", "usb-ohci";
+				compatible = "ti,ohci-omap3";
 				reg = <0x48064400 0x400>;
 				interrupt-parent = <&intc>;
 				interrupts = <76>;
 			};
 
 			usbhsehci: ehci@48064800 {
-				compatible = "ti,ehci-omap", "usb-ehci";
+				compatible = "ti,ehci-omap";
 				reg = <0x48064800 0x400>;
 				interrupt-parent = <&intc>;
 				interrupts = <77>;
@@ -669,6 +705,103 @@
 			num-eps = <16>;
 			ram-bits = <12>;
 		};
+
+		dss: dss@48050000 {
+			compatible = "ti,omap3-dss";
+			reg = <0x48050000 0x200>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&dss1_alwon_fck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@48050400 {
+				compatible = "ti,omap3-dispc";
+				reg = <0x48050400 0x400>;
+				interrupts = <25>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&dss1_alwon_fck>;
+				clock-names = "fck";
+			};
+
+			dsi: encoder@4804fc00 {
+				compatible = "ti,omap3-dsi";
+				reg = <0x4804fc00 0x200>,
+				      <0x4804fe00 0x40>,
+				      <0x4804ff00 0x20>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <25>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi1";
+				clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			rfbi: encoder@48050800 {
+				compatible = "ti,omap3-rfbi";
+				reg = <0x48050800 0x100>;
+				status = "disabled";
+				ti,hwmods = "dss_rfbi";
+				clocks = <&dss1_alwon_fck>, <&dss_ick>;
+				clock-names = "fck", "ick";
+			};
+
+			venc: encoder@48050c00 {
+				compatible = "ti,omap3-venc";
+				reg = <0x48050c00 0x100>;
+				status = "disabled";
+				ti,hwmods = "dss_venc";
+				clocks = <&dss_tv_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		ssi: ssi-controller@48058000 {
+			compatible = "ti,omap3-ssi";
+			ti,hwmods = "ssi";
+
+			status = "disabled";
+
+			reg = <0x48058000 0x1000>,
+			      <0x48059000 0x1000>;
+			reg-names = "sys",
+				    "gdd";
+
+			interrupts = <71>;
+			interrupt-names = "gdd_mpu";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ssi_port1: ssi-port@4805a000 {
+				compatible = "ti,omap3-ssi-port";
+
+				reg = <0x4805a000 0x800>,
+				      <0x4805a800 0x800>;
+				reg-names = "tx",
+					    "rx";
+
+				interrupt-parent = <&intc>;
+				interrupts = <67>,
+					     <68>;
+			};
+
+			ssi_port2: ssi-port@4805b000 {
+				compatible = "ti,omap3-ssi-port";
+
+				reg = <0x4805b000 0x800>,
+				      <0x4805b800 0x800>;
+				reg-names = "tx",
+					    "rx";
+
+				interrupt-parent = <&intc>;
+				interrupts = <69>,
+					     <70>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 281914ed0151..02f69f4a8fd3 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -34,6 +34,10 @@
 &mmc1 {
 	vmmc-supply = <&vmmc1>;
 	vmmc_aux-supply = <&vsim>;
+	/*
+	 * S6-3 must be in ON position for 8 bit mode to function
+	 * Else, use 4 bit mode
+	 */
 	bus-width = <8>;
 };
 
@@ -103,9 +107,8 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <1 0 0x08000000>;
+		ti,nand-ecc-opt = "ham1";
 		nand-bus-width = <8>;
-
-		ti,nand-ecc-opt = "sw";
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <36>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
index 02f6c7fabbec..4c22f3a7f813 100644
--- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
@@ -82,16 +82,16 @@
 		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
 	};
 
-	ssi_ssr_fck_3430es1: ssi_ssr_fck_3430es1 {
+	ssi_ssr_fck: ssi_ssr_fck_3430es1 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>;
 	};
 
-	ssi_sst_fck_3430es1: ssi_sst_fck_3430es1 {
+	ssi_sst_fck: ssi_sst_fck_3430es1 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
-		clocks = <&ssi_ssr_fck_3430es1>;
+		clocks = <&ssi_ssr_fck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
@@ -120,7 +120,7 @@
 		clock-div = <1>;
 	};
 
-	ssi_ick_3430es1: ssi_ick_3430es1 {
+	ssi_ick: ssi_ick_3430es1 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-no-wait-interface-clock";
 		clocks = <&ssi_l4_ick>;
@@ -152,7 +152,7 @@
 		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
 	};
 
-	dss1_alwon_fck_3430es1: dss1_alwon_fck_3430es1 {
+	dss1_alwon_fck: dss1_alwon_fck_3430es1 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll4_m4x2_ck>;
@@ -161,7 +161,7 @@
 		ti,set-rate-parent;
 	};
 
-	dss_ick_3430es1: dss_ick_3430es1 {
+	dss_ick: dss_ick_3430es1 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-no-wait-interface-clock";
 		clocks = <&l4_ick>;
@@ -184,7 +184,7 @@
 	dss_clkdm: dss_clkdm {
 		compatible = "ti,clockdomain";
 		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
-			 <&dss1_alwon_fck_3430es1>, <&dss_ick_3430es1>;
+			 <&dss1_alwon_fck>, <&dss_ick>;
 	};
 
 	d2d_clkdm: d2d_clkdm {
@@ -203,6 +203,6 @@
 			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
 			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
 			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&fshostusb_fck>, <&fac_ick>, <&ssi_ick_3430es1>;
+			 <&fshostusb_fck>, <&fac_ick>, <&ssi_ick>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 2e92360da1f3..3819c1e91591 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -40,6 +40,17 @@
 	};
 };
 
+&ssi {
+	status = "ok";
+
+	clocks = <&ssi_ssr_fck>,
+		 <&ssi_sst_fck>,
+		 <&ssi_ick>;
+	clock-names = "ssi_ssr_fck",
+		      "ssi_sst_fck",
+		      "ssi_ick";
+};
+
 /include/ "omap34xx-omap36xx-clocks.dtsi"
 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
index af9ae5346bf2..080fb3f4e429 100644
--- a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -160,7 +160,7 @@
 		ti,bit-shift = <30>;
 	};
 
-	dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2 {
+	dss1_alwon_fck: dss1_alwon_fck_3430es2 {
 		#clock-cells = <0>;
 		compatible = "ti,dss-gate-clock";
 		clocks = <&dpll4_m4x2_ck>;
@@ -169,7 +169,7 @@
 		ti,set-rate-parent;
 	};
 
-	dss_ick_3430es2: dss_ick_3430es2 {
+	dss_ick: dss_ick_3430es2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-dss-interface-clock";
 		clocks = <&l4_ick>;
@@ -216,7 +216,7 @@
 	dss_clkdm: dss_clkdm {
 		compatible = "ti,clockdomain";
 		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
-			 <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
+			 <&dss1_alwon_fck>, <&dss_ick>;
 	};
 
 	core_l4_clkdm: core_l4_clkdm {
diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi
index 2fcf253b677c..200ae3a5cbbb 100644
--- a/arch/arm/boot/dts/omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
@@ -70,6 +70,26 @@
 	};
 };
 
+&dpll4_m2x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&dpll4_m3x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&dpll4_m4x2_mul_ck {
+	ti,clock-mult = <1>;
+};
+
+&dpll4_m5x2_mul_ck {
+	ti,clock-mult = <1>;
+};
+
+&dpll4_m6x2_mul_ck {
+	clock-mult = <1>;
+};
+
 &cm_clockdomains {
 	dpll4_clkdm: dpll4_clkdm {
 		compatible = "ti,clockdomain";
diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
index 8ed475dd63c9..877318c28364 100644
--- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
@@ -25,16 +25,16 @@
 		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
 	};
 
-	ssi_ssr_fck_3430es2: ssi_ssr_fck_3430es2 {
+	ssi_ssr_fck: ssi_ssr_fck_3430es2 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
 	};
 
-	ssi_sst_fck_3430es2: ssi_sst_fck_3430es2 {
+	ssi_sst_fck: ssi_sst_fck_3430es2 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
-		clocks = <&ssi_ssr_fck_3430es2>;
+		clocks = <&ssi_ssr_fck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
@@ -55,7 +55,7 @@
 		clock-div = <1>;
 	};
 
-	ssi_ick_3430es2: ssi_ick_3430es2 {
+	ssi_ick: ssi_ick_3430es2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-ssi-interface-clock";
 		clocks = <&ssi_l4_ick>;
@@ -193,6 +193,6 @@
 			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
 			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
 			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&ssi_ick_3430es2>;
+			 <&ssi_ick>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 7e8dee9175d6..541704a59a5a 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -39,6 +39,26 @@
 			clock-frequency = <48000000>;
 		};
 
+		abb_mpu_iva: regulator-abb-mpu {
+			compatible = "ti,abb-v1";
+			regulator-name = "abb_mpu_iva";
+			#address-cell = <0>;
+			#size-cells = <0>;
+			reg = <0x483072f0 0x8>, <0x48306818 0x4>;
+			reg-names = "base-address", "int-address";
+			ti,tranxdone-status-mask = <0x4000000>;
+			clocks = <&sys_ck>;
+			ti,settling-time = <30>;
+			ti,clock-cycles = <8>;
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1012500		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1325000		0	0	0	0	0
+			1375000		1	0	0	0	0
+			>;
+		};
+
 		omap3_pmx_core2: pinmux@480025a0 {
 			compatible = "ti,omap3-padconf", "pinctrl-single";
 			reg = <0x480025a0 0x5c>;
@@ -52,7 +72,24 @@
 	};
 };
 
-/include/ "omap36xx-clocks.dtsi"
+/* OMAP3630 needs dss_96m_fck for VENC */
+&venc {
+	clocks = <&dss_tv_fck>, <&dss_96m_fck>;
+	clock-names = "fck", "tv_dac_clk";
+};
+
+&ssi {
+	status = "ok";
+
+	clocks = <&ssi_ssr_fck>,
+		 <&ssi_sst_fck>,
+		 <&ssi_ick>;
+	clock-names = "ssi_ssr_fck",
+		      "ssi_sst_fck",
+		      "ssi_ick";
+};
+
 /include/ "omap34xx-omap36xx-clocks.dtsi"
 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index cb04d4b37e7f..e47ff69dcf70 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -425,10 +425,11 @@
 
 	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
+		compatible = "ti,fixed-factor-clock";
 		clocks = <&dpll4_m4_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
+		ti,clock-mult = <2>;
+		ti,clock-div = <1>;
+		ti,set-rate-parent;
 	};
 
 	dpll4_m4x2_ck: dpll4_m4x2_ck {
@@ -438,6 +439,7 @@
 		ti,bit-shift = <0x1d>;
 		reg = <0x0d00>;
 		ti,set-bit-to-disable;
+		ti,set-rate-parent;
 	};
 
 	dpll4_m5_ck: dpll4_m5_ck {
@@ -451,10 +453,11 @@
 
 	dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
+		compatible = "ti,fixed-factor-clock";
 		clocks = <&dpll4_m5_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
+		ti,clock-mult = <2>;
+		ti,clock-div = <1>;
+		ti,set-rate-parent;
 	};
 
 	dpll4_m5x2_ck: dpll4_m5x2_ck {
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
new file mode 100644
index 000000000000..6dc84d9f9b4c
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap4-duovero.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "OMAP4430 Gumstix Duovero on Parlor";
+	compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "duovero:blue:led0";
+			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;	/* gpio_122 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@121 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
+			gpio-key,wakeup;
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "d";
+
+		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio_63 */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-0 = <
+			&led_pins
+			&button_pins
+			&smsc_pins
+	>;
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* abe_dmic_din2.gpio_121 */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	smsc_pins: pinmux_smsc_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3)		/* gpmc_a20.gpio_44: IRQ */
+			OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a21.gpio_45: nReset */
+			OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48: amdix enabled */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)		/* hdmi_hpd.gpio_63 */
+			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+		>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <100000>;
+
+	/* optional 1K EEPROM with revision information */
+	eeprom@51 {
+		compatible = "atmel,24c01";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x1000000>;			/* CS5 */
+
+	ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;		/* gpio_44 */
+
+		phy-mode = "mii";
+
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <50>;
+		gpmc,cs-wr-off-ns = <50>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <50>;
+		gpmc,we-on-ns = <15>;
+		gpmc,we-off-ns = <50>;
+		gpmc,rd-cycle-ns = <50>;
+		gpmc,wr-cycle-ns = <50>;
+		gpmc,access-ns = <50>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <35>;
+		gpmc,cycle2cycle-delay-ns = <35>;
+		gpmc,wr-data-mux-bus-ns = <35>;
+		gpmc,wr-access-ns = <50>;
+
+		gpmc,mux-add-data = <2>;
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,sync-clk-ps = <20000>;
+	};
+};
+
+&dss {
+	status = "ok";
+};
+
+&hdmi {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi
new file mode 100644
index 000000000000..e860ccd9d09c
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-duovero.dtsi
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap443x.dtsi"
+
+/ {
+	model = "Gumstix Duovero";
+	compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "DuoVero";
+
+		ti,mclk-freq = <38400000>;
+
+		ti,mcpdm = <&mcpdm>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias";
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;	/* gpio_62 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1phy_pins>;
+
+		clocks = <&auxclk3_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	/* regulator for w2cbw0015 on sdio5 */
+	w2cbw0015_vmmc: w2cbw0015_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&w2cbw0015_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "w2cbw0015";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;		/* gpio_43 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&twl6040_pins
+			&hsusbb1_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_nxt.gpio_160 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+		>;
+	};
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+		>;
+	};
+
+	hsusb1phy_pins: pinmux_hsusb1phy_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_wait1.gpio_62 */
+		>;
+	};
+
+	w2cbw0015_pins: pinmux_w2cbw0015_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
+			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_cmd */
+			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_dat0 */
+			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
+			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
+			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	mmc5_pins: pinmux_mmc5_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3 */
+		>;
+	};
+};
+
+/* PMIC */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		reg = <0x4b>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_2N cascaded to gic */
+		interrupt-parent = <&gic>;
+		ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>;		/* gpio_160 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+/* on-board bluetooth / WiFi module */
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcpdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+
+	vmmc-supply = <&vmmc>;
+	ti,bus-width = <4>;
+	ti,non-removable;		/* FIXME: use PMIC_MMC detect */
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+/* mmc3 is available to the expansion board */
+
+&mmc4 {
+	status = "disabled";
+};
+
+/* on-board WiFi module */
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc5_pins>;
+
+	vmmc-supply = <&w2cbw0015_vmmc>;
+	ti,bus-width = <4>;
+	ti,non-removable;
+	cap-power-off-card;
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 88c6a05cab41..8cfa3c8a72b0 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -16,6 +16,11 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
+	aliases {
+		display0 = &dvi0;
+		display1 = &hdmi0;
+	};
+
 	leds: leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -83,12 +88,8 @@
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
 		vcc-supply = <&hsusb1_power>;
-	/**
-	 * FIXME:
-	 * put the right clock phandle here when available
-	 *	clocks = <&auxclk3>;
-	 *	clock-names = "main_clk";
-	 */
+		clocks = <&auxclk3_ck>;
+		clock-names = "main_clk";
 		clock-frequency = <19200000>;
 	};
 
@@ -104,14 +105,94 @@
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder@1 {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@1 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
 };
 
 &omap4_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
-			&twl6040_pins
-			&mcpdm_pins
-			&mcbsp1_pins
 			&dss_dpi_pins
 			&tfp410_pins
 			&dss_hdmi_pins
@@ -300,6 +381,10 @@
 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
 		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
 		/* IRQ# = 119 */
 		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
 		interrupt-parent = <&gic>;
@@ -380,22 +465,37 @@
 	device-handle = <&elpida_ECB240ABACN>;
 };
 
-&mcbsp2 {
-	status = "disabled";
-};
-
-&mcbsp3 {
-	status = "disabled";
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
 };
 
-&dmic {
-	status = "disabled";
+&mcpdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
 };
 
 &twl_usb_comparator {
 	usb-supply = <&vusb>;
 };
 
+&uart2 {
+	interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART2_RX>;
+};
+
+&uart3 {
+	interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&uart4 {
+	interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART4_RX>;
+};
+
 &usb_otg_hs {
 	interface-type = <1>;
 	mode = <3>;
@@ -409,3 +509,30 @@
 &usbhsehci {
 	phys = <&hsusb1_phy>;
 };
+
+&dss {
+	status = "ok";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dsi2 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index dbc81fb6ef03..3e1da43068f6 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -19,6 +19,12 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
+	aliases {
+		display0 = &lcd0;
+		display1 = &lcd1;
+		display2 = &hdmi0;
+	};
+
 	vdd_eth: fixedregulator-vdd-eth {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_ETH";
@@ -153,16 +159,53 @@
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
+
+	tpd12s015: encoder@0 {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "c";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
 };
 
 &omap4_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
-			&twl6040_pins
-			&mcpdm_pins
-			&dmic_pins
-			&mcbsp1_pins
-			&mcbsp2_pins
 			&dss_hdmi_pins
 			&tpd12s015_pins
 	>;
@@ -326,6 +369,10 @@
 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
 		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
 		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
 		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
 		interrupt-parent = <&gic>;
@@ -523,22 +570,48 @@
 };
 
 &uart2 {
+	interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART2_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
 };
 
 &uart3 {
+	interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
 };
 
 &uart4 {
+	interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART4_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins>;
 };
 
-&mcbsp3 {
-	status = "disabled";
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&dmic {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dmic_pins>;
+	status = "okay";
+};
+
+&mcpdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
 };
 
 &twl_usb_comparator {
@@ -550,3 +623,68 @@
 	mode = <3>;
 	power = <50>;
 };
+
+&dss {
+	status = "ok";
+};
+
+&dsi1 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+
+	port {
+		dsi1_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd0: display {
+		compatible = "tpo,taal", "panel-dsi-cm";
+		label = "lcd0";
+
+		reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;	/* 102 */
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi1_out_ep>;
+			};
+		};
+	};
+};
+
+&dsi2 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+
+	port {
+		dsi2_out_ep: endpoint {
+			remote-endpoint = <&lcd1_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd1: display {
+		compatible = "tpo,taal", "panel-dsi-cm";
+		label = "lcd1";
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;	/* 104 */
+
+		port {
+			lcd1_in: endpoint {
+				remote-endpoint = <&dsi2_out_ep>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap4-var-dvk-om44.dts b/arch/arm/boot/dts/omap4-var-dvk-om44.dts
new file mode 100644
index 000000000000..458d79fa378b
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-var-dvk-om44.dts
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap4-var-som-om44.dtsi"
+#include "omap4-var-som-om44-wlan.dtsi"
+#include "omap4-var-om44customboard.dtsi"
+
+/ {
+	model = "Variscite VAR-DVK-OM44";
+	compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
+
+	lcd0: display {
+		compatible = "innolux,at070tn83", "panel-dpi";
+		label = "lcd";
+		panel-timing {
+			clock-frequency = <33333333>;
+
+			hback-porch = <40>;
+			hactive = <800>;
+			hfront-porch = <40>;
+			hsync-len = <48>;
+
+			vback-porch = <29>;
+			vactive = <480>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+
+		gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio 122 */
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dsi2 {
+	status = "okay";
+	vdd-supply = <&vcxio>;
+};
diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
new file mode 100644
index 000000000000..f2d2fdb75628
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
@@ -0,0 +1,235 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_led_pins>;
+
+		led0 {
+			label = "var:green:led0";
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio 173 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1 {
+			label = "var:green:led1";
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; /* gpio 172 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-key@184 {
+			label = "user";
+			gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */
+			linux,code = <BTN_EXTRA>;
+			gpio-key,wakeup;
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_pins>;
+		label = "hdmi";
+		type = "a";
+
+		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi1_cs2.uart1_cts */
+			OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1)		/* mcspi1_cs3.uart1_rts */
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1)	/* i2c2_scl.uart1_rx */
+			OMAP4_IOPAD(0x128, PIN_OUTPUT | MUX_MODE1)		/* i2c2_sda.uart1_tx */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
+			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
+			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
+			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	mcasp_pins: pinmux_mcsasp_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2)		/*  mcbsp2_dr.abe_mcasp_axr */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data23 */
+			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data22 */
+			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data21 */
+			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data20 */
+			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data19 */
+			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data18 */
+			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data15 */
+			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data14 */
+			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data13 */
+			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data12 */
+			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data11 */
+			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data10 */
+			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data9 */
+			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data16 */
+			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data17 */
+			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_hsync */
+			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)		/* dispc2_pclk */
+			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_vsync */
+			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_de */
+			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data8 */
+			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data7 */
+			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data6 */
+			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data5 */
+			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data4 */
+			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data3 */
+			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data2 */
+			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data1 */
+			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data0 */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	mmc5_pins: pinmux_mmc5_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3)		/* abe_mcbsp2_clkx.gpio_110 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
+
+	gpio_led_pins: pinmux_gpio_led_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3)		/* kpd_col4.gpio_172 */
+			OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)		/* kpd_col5.gpio_173 */
+		>;
+	};
+
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3)		/* sys_boot0.gpio_184 */
+		>;
+	};
+
+	ks8851_irq_pins: pinmux_ks8851_irq_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3)	/* kpd_col3.gpio_171 */
+		>;
+	};
+
+	hdmi_hpd_pins: pinmux_hdmi_hpd_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
+		>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+	status = "okay";
+
+	eth@0 {
+		compatible = "ks8851";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ks8851_irq_pins>;
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio 171 */
+	};
+};
+
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc5_pins>;
+	vmmc-supply = <&vbat>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio 110 */
+	status = "okay";
+};
+
+&dss {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
new file mode 100644
index 000000000000..cc66af419236
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	/* regulator for wl12xx on sdio4 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_ctrl_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 11 0>;	/* gpio 43 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&omap4_pmx_core {
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a17.gpio_41 (WLAN_IRQ) */
+			OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a18.gpio_42 (BT_EN) */
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 (WLAN_EN) */
+		>;
+	};
+
+	mmc4_pins: pinmux_mmc4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_clk.sdmmc4_clk */
+			OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_simo.sdmmc4_cmd */
+			OMAP4_IOPAD(0x158, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_somi.sdmmc4_dat0 */
+			OMAP4_IOPAD(0x15e, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_tx.sdmmc4_dat1 */
+			OMAP4_IOPAD(0x15c, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_rx.sdmmc4_dat2 */
+			OMAP4_IOPAD(0x15a, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_cs0.sdmmc4_dat3 */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&mmc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc4_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
new file mode 100644
index 000000000000..062701e1a898
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -0,0 +1,343 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "omap4460.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-OM44";
+	compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	sound: sound@0 {
+		compatible = "ti,abe-twl6040";
+		ti,model = "VAR-SOM-OM44";
+
+		ti,mclk-freq = <38400000>;
+		ti,mcpdm = <&mcpdm>;
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"AFML", "Line In",
+			"AFMR", "Line In";
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&hsusbb1_phy_clk_pins
+			&hsusbb1_phy_rst_pins
+		>;
+
+		reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */
+		vcc-supply = <&vbat>;
+
+		clocks = <&auxclk3_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	vbat: fixedregulator-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusbb1_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3)		/* fref_clk2_out.gpio_182 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+		>;
+	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs4.gpio_101 (irq) */
+			OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3)		/* gpmc_ncs5.gpio_102 (rst) */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+		>;
+	};
+
+	hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3)		/* kpd_row2.gpio_177 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb1_hub_rst_pins
+		&lan7500_rst_pins
+	>;
+
+	hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0)	/* fref_clk3_out */
+		>;
+	};
+
+	hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk1 */
+		>;
+	};
+
+	lan7500_rst_pins: pinmux_lan7500_rst_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk0 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+		interrupt-parent = <&gic>;
+		ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&vusim {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on;
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	touchscreen: tsc2004@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* gpio 101 */
+		status = "disabled";
+	};
+
+	tmp105@49 {
+		compatible = "ti,tmp105";
+		reg = <0x49>;
+	};
+
+	eeprom@50 {
+		compatible = "microchip,24c32";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&mcpdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&gpmc {
+	status = "disabled";
+};
+
+&mcspi1 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "disabled";
+};
+
+&mcspi3 {
+	status = "disabled";
+};
+
+&mcspi4 {
+	status = "disabled";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	ti,non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&keypad {
+	status = "disabled";
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
diff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts
deleted file mode 100644
index b41269e871dd..000000000000
--- a/arch/arm/boot/dts/omap4-var-som.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-
-/ {
-	model = "Variscite OMAP4 SOM";
-	compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	vdd_eth: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_ETH";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-		interrupt-parent = <&gic>;
-	};
-};
-
-#include "twl6030.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * Temperature Sensor
-	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
-	 */
-	tmp105@49 {
-		compatible = "ti,tmp105";
-		reg = <0x49>;
-	};
-};
-
-&i2c4 {
-	clock-frequency = <400000>;
-};
-
-&mcspi1 {
-	eth@0 {
-		compatible = "ks8851";
-		spi-max-frequency = <24000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio line 171 */
-		vdd-supply = <&vdd_eth>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-	ti,bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	ti,bus-width = <4>;
-};
diff --git a/arch/arm/boot/dts/omap4-var-stk-om44.dts b/arch/arm/boot/dts/omap4-var-stk-om44.dts
new file mode 100644
index 000000000000..56b64e618608
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-var-stk-om44.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap4-var-som-om44.dtsi"
+#include "omap4-var-som-om44-wlan.dtsi"
+#include "omap4-var-om44customboard.dtsi"
+
+/ {
+	model = "Variscite VAR-STK-OM44";
+	compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index d3f8a6e8ca20..7e26d222bfe3 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -36,6 +36,11 @@
 			device_type = "cpu";
 			next-level-cache = <&L2>;
 			reg = <0x0>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 		cpu@1 {
 			compatible = "arm,cortex-a9";
@@ -62,12 +67,13 @@
 
 	local-timer@48240600 {
 		compatible = "arm,cortex-a9-twd-timer";
+		clocks = <&mpu_periphclk>;
 		reg = <0x48240600 0x20>;
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is uses for IPs
+	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
 	 */
 	soc {
@@ -91,7 +97,7 @@
 	/*
 	 * XXX: Use a flat representation of the OMAP4 interconnect.
 	 * The real OMAP interconnect network is quite complex.
-	 * Since that will not bring real advantage to represent that in DT for
+	 * Since it will not bring real advantage to represent that in DT for
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */
@@ -186,6 +192,22 @@
 			pinctrl-single,function-mask = <0x7fff>;
 		};
 
+		omap4_padconf_global: tisyscon@4a1005a0 {
+			compatible = "syscon";
+			reg = <0x4a1005a0 0x170>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x60 0x4>;
+			syscon = <&omap4_padconf_global>;
+			pbias_mmc_reg: pbias_mmc_omap4 {
+				regulator-name = "pbias_mmc_omap4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -275,6 +297,8 @@
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
 			ti,no-idle-on-init;
+			clocks = <&l3_div_ck>;
+			clock-names = "fck";
 		};
 
 		uart1: serial@4806a000 {
@@ -288,7 +312,7 @@
 		uart2: serial@4806c000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x4806c000 0x100>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
@@ -296,7 +320,7 @@
 		uart3: serial@48020000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x48020000 0x100>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
@@ -304,7 +328,7 @@
 		uart4: serial@4806e000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x4806e000 0x100>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
@@ -313,6 +337,7 @@
 			compatible = "ti,omap4-hwspinlock";
 			reg = <0x4a0f6000 0x1000>;
 			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
 		};
 
 		i2c1: i2c@48070000 {
@@ -419,6 +444,7 @@
 			ti,needs-special-reset;
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
@@ -461,6 +487,21 @@
 			dma-names = "tx", "rx";
 		};
 
+		mmu_dsp: mmu@4a066000 {
+			compatible = "ti,omap4-iommu";
+			reg = <0x4a066000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_dsp";
+		};
+
+		mmu_ipu: mmu@55082000 {
+			compatible = "ti,omap4-iommu";
+			reg = <0x55082000 0x100>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu";
+			ti,iommu-bus-err-back;
+		};
+
 		wdt2: wdt@4a314000 {
 			compatible = "ti,omap4-wdt", "ti,omap3-wdt";
 			reg = <0x4a314000 0x80>;
@@ -478,6 +519,7 @@
 			dmas = <&sdma 65>,
 			       <&sdma 66>;
 			dma-names = "up_link", "dn_link";
+			status = "disabled";
 		};
 
 		dmic: dmic@4012e000 {
@@ -489,6 +531,7 @@
 			ti,hwmods = "dmic";
 			dmas = <&sdma 67>;
 			dma-names = "up_link";
+			status = "disabled";
 		};
 
 		mcbsp1: mcbsp@40122000 {
@@ -503,6 +546,7 @@
 			dmas = <&sdma 33>,
 			       <&sdma 34>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp2: mcbsp@40124000 {
@@ -517,6 +561,7 @@
 			dmas = <&sdma 17>,
 			       <&sdma 18>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp3: mcbsp@40126000 {
@@ -531,6 +576,7 @@
 			dmas = <&sdma 19>,
 			       <&sdma 20>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp4: mcbsp@48096000 {
@@ -544,6 +590,7 @@
 			dmas = <&sdma 31>,
 			       <&sdma 32>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		keypad: keypad@4a31c000 {
@@ -554,6 +601,13 @@
 			ti,hwmods = "kbd";
 		};
 
+		dmm@4e000000 {
+			compatible = "ti,omap4-dmm";
+			reg = <0x4e000000 0x800>;
+			interrupts = <0 113 0x4>;
+			ti,hwmods = "dmm";
+		};
+
 		emif1: emif@4c000000 {
 			compatible = "ti,emif-4d";
 			reg = <0x4c000000 0x100>;
@@ -589,6 +643,8 @@
 				compatible = "ti,omap-usb2";
 				reg = <0x4a0ad080 0x58>;
 				ctrl-module = <&omap_control_usb2phy>;
+				clocks = <&usb_phy_cm_clk32k>;
+				clock-names = "wkupclk";
 				#phy-cells = <0>;
 			};
 		};
@@ -697,16 +753,22 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			clocks = <&init_60m_fclk>,
+				 <&xclk60mhsp1_ck>,
+				 <&xclk60mhsp2_ck>;
+			clock-names = "refclk_60m_int",
+				      "refclk_60m_ext_p1",
+				      "refclk_60m_ext_p2";
 
 			usbhsohci: ohci@4a064800 {
-				compatible = "ti,ohci-omap3", "usb-ohci";
+				compatible = "ti,ohci-omap3";
 				reg = <0x4a064800 0x400>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			usbhsehci: ehci@4a064c00 {
-				compatible = "ti,ehci-omap", "usb-ehci";
+				compatible = "ti,ehci-omap";
 				reg = <0x4a064c00 0x400>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -757,6 +819,113 @@
 			dmas = <&sdma 117>, <&sdma 116>;
 			dma-names = "tx", "rx";
 		};
+
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			ti,tranxdone-status-mask = <0x80>;
+			clocks = <&sys_clkin_ck>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			status = "disabled";
+		};
+
+		abb_iva: regulator-abb-iva {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_iva";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			ti,tranxdone-status-mask = <0x80000000>;
+			clocks = <&sys_clkin_ck>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			status = "disabled";
+		};
+
+		dss: dss@58000000 {
+			compatible = "ti,omap4-dss";
+			reg = <0x58000000 0x80>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&dss_dss_clk>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@58001000 {
+				compatible = "ti,omap4-dispc";
+				reg = <0x58001000 0x1000>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&dss_dss_clk>;
+				clock-names = "fck";
+			};
+
+			rfbi: encoder@58002000  {
+				compatible = "ti,omap4-rfbi";
+				reg = <0x58002000 0x1000>;
+				status = "disabled";
+				ti,hwmods = "dss_rfbi";
+				clocks = <&dss_dss_clk>, <&dss_fck>;
+				clock-names = "fck", "ick";
+			};
+
+			venc: encoder@58003000 {
+				compatible = "ti,omap4-venc";
+				reg = <0x58003000 0x1000>;
+				status = "disabled";
+				ti,hwmods = "dss_venc";
+				clocks = <&dss_tv_clk>;
+				clock-names = "fck";
+			};
+
+			dsi1: encoder@58004000 {
+				compatible = "ti,omap4-dsi";
+				reg = <0x58004000 0x200>,
+				      <0x58004200 0x40>,
+				      <0x58004300 0x20>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi1";
+				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			dsi2: encoder@58005000 {
+				compatible = "ti,omap4-dsi";
+				reg = <0x58005000 0x200>,
+				      <0x58005200 0x40>,
+				      <0x58005300 0x20>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi2";
+				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			hdmi: encoder@58006000 {
+				compatible = "ti,omap4-hdmi";
+				reg = <0x58006000 0x200>,
+				      <0x58006200 0x100>,
+				      <0x58006300 0x100>,
+				      <0x58006400 0x1000>;
+				reg-names = "wp", "pll", "phy", "core";
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_hdmi";
+				clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+				dmas = <&sdma 76>;
+				dma-names = "audio_tx";
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index 8c1cfad30d60..0adfa1d1ef20 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -43,6 +43,32 @@
 			#thermal-sensor-cells = <0>;
 		};
 	};
+
+	ocp {
+		abb_mpu: regulator-abb-mpu {
+			status = "okay";
+
+			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>;
+			reg-names = "base-address", "int-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1025000		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1313000		0	0	0	0	0
+			1375000		1	0	0	0	0
+			1389000		1	0	0	0	0
+			>;
+		};
+
+		/* Default unused, just provide register info for record */
+		abb_iva: regulator-abb-iva {
+			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>;
+			reg-names = "base-address", "int-address";
+		};
+
+	};
+
 };
 
 /include/ "omap443x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 6b32f520741a..194f9ef0a009 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -50,7 +50,44 @@
 
 			#thermal-sensor-cells = <0>;
 		};
+
+		abb_mpu: regulator-abb-mpu {
+			status = "okay";
+
+			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1025000		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1313000		0	0	0x100000 0x40000 0
+			1375000		1	0	0	0	0
+			1389000		1	0	0	0	0
+			>;
+		};
+
+		abb_iva: regulator-abb-iva {
+			status = "okay";
+
+			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			950000		0	0	0	0	0
+			1140000		0	0	0	0	0
+			1291000		0	0	0x200000 0	0
+			1375000		1	0	0	0	0
+			1376000		1	0	0	0	0
+			>;
+		};
 	};
+
 };
 
 /include/ "omap446x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
new file mode 100644
index 000000000000..b8698ca68647
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -0,0 +1,413 @@
+/*
+ * Support for CompuLab CM-T54
+ */
+/dts-v1/;
+
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "CompuLab CM-T54";
+	compatible = "compulab,omap5-cm-t54", "ti,omap5";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x7F000000>; /* 2048 MB */
+	};
+
+	vmmcsd_fixed: fixed-regulator-mmcsd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vwlan_pdn_fixed: fixed-regulator-vwlan-pdn {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_pdn_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ldo2_reg>;
+		gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>;   /* gpio4_109 */
+		startup-delay-us = <1000>;
+		enable-active-high;
+	};
+
+	vwlan_fixed: fixed-regulator-vwlan {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vwlan_pdn_fixed>;
+		gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;   /* gpio4_110 */
+		startup-delay-us = <1000>;
+		enable-active-high;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
+	};
+
+	/* HS USB Host PHY on PORT 3 */
+	hsusb3_phy: hsusb3_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@1 {
+			label = "Heartbeat";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+};
+
+&omap5_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&led_gpio_pins
+			&usbhost_pins
+	>;
+
+	led_gpio_pins: pinmux_led_gpio_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */
+			OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */
+			OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */
+			OMAP5_IOPAD(0x01e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */
+			OMAP5_IOPAD(0x01e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */
+			OMAP5_IOPAD(0x01ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */
+			OMAP5_IOPAD(0x01ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */
+			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */
+			OMAP5_IOPAD(0x0044, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */
+			OMAP5_IOPAD(0x0046, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */
+			OMAP5_IOPAD(0x0048, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */
+			OMAP5_IOPAD(0x004a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */
+			OMAP5_IOPAD(0x004c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */
+			OMAP5_IOPAD(0x004e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */
+			OMAP5_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */
+			OMAP5_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
+			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
+			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
+			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
+			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
+			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
+		>;
+	};
+
+	wlan_gpios_pins: pinmux_wlan_gpios_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_109 */
+			OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_110 */
+		>;
+	};
+
+	usbhost_pins: pinmux_usbhost_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_strobe */
+			OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_data */
+
+			OMAP5_IOPAD(0x01dc, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_strobe */
+			OMAP5_IOPAD(0x01de, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_data */
+
+			OMAP5_IOPAD(0x00a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */
+			OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&ldo9_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&mmc3_pins
+		&wlan_gpios_pins
+	>;
+	vmmc-supply = <&vwlan_fixed>;
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "at24,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	palmas: palmas@48 {
+		compatible = "ti,palmas";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+		interrupt-parent = <&gic>;
+		reg = <0x48>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,system-power-controller;
+
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			ti,wakeup;
+		};
+
+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+		};
+
+		palmas_pmic {
+			compatible = "ti,palmas-pmic";
+			interrupt-parent = <&palmas>;
+			interrupts = <14 IRQ_TYPE_NONE>;
+			interrupt-name = "short-irq";
+
+			ti,ldo6-vibrator;
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					ti,smps-range = <0x80>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out2_reg: smps10_out2 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out2";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out1_reg: smps10_out1 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out1";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_3V3_WLAN */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					startup-delay-us = <1000>;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VCC_1V5_AUD */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
+					regulator-name = "ldo6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
+					regulator-name = "ldo7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					/* Only for efuse reprograming! */
+					status = "disabled";
+				};
+
+				ldo8_reg: ldo8 {
+					/* VDD_3v0: Does not go anywhere */
+					regulator-name = "ldo8";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3250000>;
+					regulator-max-microvolt = <3250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&usbhshost {
+	port2-mode = "ehci-hsic";
+	port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts
new file mode 100644
index 000000000000..aa98fea3f2b3
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-sbc-t54.dts
@@ -0,0 +1,51 @@
+/*
+ * Suppport for CompuLab SBC-T54 with CM-T54
+ */
+
+#include "omap5-cm-t54.dts"
+
+/ {
+	model = "CompuLab SBC-T54 with CM-T54";
+	compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5";
+};
+
+&omap5_pmx_core {
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+			OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+		>;
+	};
+
+	mmc1_aux_pins: pinmux_mmc1_aux_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */
+			OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&mmc1_pins
+		&mmc1_aux_pins
+	>;
+	cd-inverted;
+	wp-inverted;
+	cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */
+	wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "at24,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 002fa70180a5..1e1b05768cec 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -20,6 +20,10 @@
 		reg = <0x80000000 0x7F000000>; /* 2032 MB */
 	};
 
+	aliases {
+		display0 = &hdmi0;
+	};
+
 	vmmcsd_fixed: fixedregulator-mmcsd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -31,12 +35,8 @@
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
-	/**
-	  * FIXME
-	  * Put the right clock phandle here when available
-	  *	clocks = <&auxclk1>;
-	  *	clock-names = "main_clk";
-	  */
+		clocks = <&auxclk1_ck>;
+		clock-names = "main_clk";
 		clock-frequency = <19200000>;
 	};
 
@@ -55,6 +55,51 @@
 			default-state = "off";
 		};
 	};
+
+	tpd12s015: encoder@0 {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
+			<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
+			<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "b";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
 };
 
 &omap5_pmx_core {
@@ -187,6 +232,19 @@
 		>;
 	};
 
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			0x0fc (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			0x100 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			0x102 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
+		>;
+	};
 };
 
 &omap5_pmx_wkup {
@@ -438,6 +496,13 @@
 	pinctrl-0 = <&i2c5_pins>;
 
 	clock-frequency = <400000>;
+
+	gpio9: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
 
 &mcbsp3 {
@@ -495,3 +560,21 @@
 &cpu0 {
 	cpu0-supply = <&smps123_reg>;
 };
+
+&dss {
+	status = "ok";
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&ldo4_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index a72813a9663e..3bfda16c8b52 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -49,6 +49,12 @@
 				1000000 1060000
 				1500000 1250000
 			>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
 			/* cooling options */
 			cooling-min-level = <0>;
 			cooling-max-level = <2>;
@@ -76,6 +82,12 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	gic: interrupt-controller@48211000 {
 		compatible = "arm,cortex-a15-gic";
 		interrupt-controller;
@@ -87,7 +99,7 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is uses for IPs
+	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
 	 */
 	soc {
@@ -101,7 +113,7 @@
 	/*
 	 * XXX: Use a flat representation of the OMAP3 interconnect.
 	 * The real OMAP interconnect network is quite complex.
-	 * Since that will not bring real advantage to represent that in DT for
+	 * Since it will not bring real advantage to represent that in DT for
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */
@@ -192,6 +204,22 @@
 			pinctrl-single,function-mask = <0x7fff>;
 		};
 
+		omap5_padconf_global: tisyscon@4a002da0 {
+			compatible = "syscon";
+			reg = <0x4A002da0 0xec>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x60 0x4>;
+			syscon = <&omap5_padconf_global>;
+			pbias_mmc_reg: pbias_mmc_omap5 {
+				regulator-name = "pbias_mmc_omap5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -302,6 +330,8 @@
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
 		};
 
 		i2c1: i2c@48070000 {
@@ -353,6 +383,7 @@
 			compatible = "ti,omap4-hwspinlock";
 			reg = <0x4a0f6000 0x1000>;
 			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
 		};
 
 		mcspi1: spi@48098000 {
@@ -471,6 +502,7 @@
 			ti,needs-special-reset;
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
@@ -513,6 +545,21 @@
 			dma-names = "tx", "rx";
 		};
 
+		mmu_dsp: mmu@4a066000 {
+			compatible = "ti,omap4-iommu";
+			reg = <0x4a066000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_dsp";
+		};
+
+		mmu_ipu: mmu@55082000 {
+			compatible = "ti,omap4-iommu";
+			reg = <0x55082000 0x100>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu";
+			ti,iommu-bus-err-back;
+		};
+
 		keypad: keypad@4ae1c000 {
 			compatible = "ti,omap4-keypad";
 			reg = <0x4ae1c000 0x400>;
@@ -529,6 +576,7 @@
 			dmas = <&sdma 65>,
 			       <&sdma 66>;
 			dma-names = "up_link", "dn_link";
+			status = "disabled";
 		};
 
 		dmic: dmic@4012e000 {
@@ -540,6 +588,7 @@
 			ti,hwmods = "dmic";
 			dmas = <&sdma 67>;
 			dma-names = "up_link";
+			status = "disabled";
 		};
 
 		mcbsp1: mcbsp@40122000 {
@@ -554,6 +603,7 @@
 			dmas = <&sdma 33>,
 			       <&sdma 34>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp2: mcbsp@40124000 {
@@ -568,6 +618,7 @@
 			dmas = <&sdma 17>,
 			       <&sdma 18>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp3: mcbsp@40126000 {
@@ -582,6 +633,14 @@
 			dmas = <&sdma 19>,
 			       <&sdma 20>;
 			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mailbox: mailbox@4a0f4000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4a0f4000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox";
 		};
 
 		timer1: timer@4ae18000 {
@@ -683,6 +742,13 @@
 			ti,hwmods = "wd_timer2";
 		};
 
+		dmm@4e000000 {
+			compatible = "ti,omap5-dmm";
+			reg = <0x4e000000 0x800>;
+			interrupts = <0 113 0x4>;
+			ti,hwmods = "dmm";
+		};
+
 		emif1: emif@4c000000 {
 			compatible	= "ti,emif-4d5";
 			ti,hwmods	= "emif1";
@@ -732,7 +798,8 @@
 				compatible = "snps,dwc3";
 				reg = <0x4a030000 0x10000>;
 				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-				usb-phy = <&usb2_phy>, <&usb3_phy>;
+				phys = <&usb2_phy>, <&usb3_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
 				dr_mode = "peripheral";
 				tx-fifo-resize;
 			};
@@ -749,6 +816,9 @@
 				compatible = "ti,omap-usb2";
 				reg = <0x4a084000 0x7c>;
 				ctrl-module = <&omap_control_usb2phy>;
+				clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
 			};
 
 			usb3_phy: usb3phy@4a084400 {
@@ -758,6 +828,13 @@
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 				ctrl-module = <&omap_control_usb3phy>;
+				clocks = <&usb_phy_cm_clk32k>,
+					 <&sys_clkin>,
+					 <&usb_otg_ss_refclk960m>;
+				clock-names =	"wkupclk",
+						"sysclk",
+						"refclk";
+				#phy-cells = <0>;
 			};
 		};
 
@@ -775,16 +852,22 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			clocks = <&l3init_60m_fclk>,
+				 <&xclk60mhsp1_ck>,
+				 <&xclk60mhsp2_ck>;
+			clock-names = "refclk_60m_int",
+				      "refclk_60m_ext_p1",
+				      "refclk_60m_ext_p2";
 
 			usbhsohci: ohci@4a064800 {
-				compatible = "ti,ohci-omap3", "usb-ohci";
+				compatible = "ti,ohci-omap3";
 				reg = <0x4a064800 0x400>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			usbhsehci: ehci@4a064c00 {
-				compatible = "ti,ehci-omap", "usb-ehci";
+				compatible = "ti,ehci-omap";
 				reg = <0x4a064c00 0x400>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -801,6 +884,108 @@
 
 			#thermal-sensor-cells = <1>;
 		};
+
+		omap_control_sata: control-phy@4a002374 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002374 0x4>;
+			reg-names = "power";
+			clocks = <&sys_clkin>;
+			clock-names = "sysclk";
+		};
+
+		/* OCP2SCP3 */
+		ocp2scp@4a090000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x4a090000 0x20>;
+			ranges;
+			ti,hwmods = "ocp2scp3";
+			sata_phy: phy@4a096000 {
+				compatible = "ti,phy-pipe3-sata";
+				reg = <0x4A096000 0x80>, /* phy_rx */
+				      <0x4A096400 0x64>, /* phy_tx */
+				      <0x4A096800 0x40>; /* pll_ctrl */
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				ctrl-module = <&omap_control_sata>;
+				clocks = <&sys_clkin>;
+				clock-names = "sysclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		sata: sata@4a141100 {
+			compatible = "snps,dwc-ahci";
+			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			clocks = <&sata_ref_clk>;
+			ti,hwmods = "sata";
+		};
+
+		dss: dss@58000000 {
+			compatible = "ti,omap5-dss";
+			reg = <0x58000000 0x80>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&dss_dss_clk>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@58001000 {
+				compatible = "ti,omap5-dispc";
+				reg = <0x58001000 0x1000>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&dss_dss_clk>;
+				clock-names = "fck";
+			};
+
+			dsi1: encoder@58004000 {
+				compatible = "ti,omap5-dsi";
+				reg = <0x58004000 0x200>,
+				      <0x58004200 0x40>,
+				      <0x58004300 0x40>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi1";
+				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			dsi2: encoder@58005000 {
+				compatible = "ti,omap5-dsi";
+				reg = <0x58009000 0x200>,
+				      <0x58009200 0x40>,
+				      <0x58009300 0x40>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi2";
+				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			hdmi: encoder@58060000 {
+				compatible = "ti,omap5-hdmi";
+				reg = <0x58040000 0x200>,
+				      <0x58040200 0x80>,
+				      <0x58040300 0x80>,
+				      <0x58060000 0x19000>;
+				reg-names = "wp", "pll", "phy", "core";
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_hdmi";
+				clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+				dmas = <&sdma 76>;
+				dma-names = "audio_tx";
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index d487fdab3921..aeb142ce8e9d 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -120,10 +120,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
 		reg = <0x01f0>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	abe_24m_fclk: abe_24m_fclk {
@@ -145,10 +143,11 @@
 
 	abe_iclk: abe_iclk {
 		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&abe_clk>;
-		clock-mult = <1>;
-		clock-div = <2>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x0528>;
+		ti,dividers = <2>, <1>;
 	};
 
 	abe_lp_clk_div: abe_lp_clk_div {
@@ -164,10 +163,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
 		reg = <0x01f4>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_core_ck: dpll_core_ck {
@@ -188,10 +185,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0150>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	c2c_fclk: c2c_fclk {
@@ -215,10 +210,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0138>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
@@ -226,10 +219,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
 		reg = <0x013c>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
@@ -237,10 +228,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0140>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
@@ -248,10 +237,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0144>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
@@ -259,10 +246,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0154>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
@@ -270,10 +255,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0158>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
@@ -281,10 +264,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
 		reg = <0x015c>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_core_m2_ck: dpll_core_m2_ck {
@@ -292,10 +273,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_ck>;
 		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0130>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
@@ -303,10 +282,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0134>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
@@ -335,10 +312,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_iva_x2_ck>;
 		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
 		reg = <0x01b8>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck {
@@ -346,10 +321,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_iva_x2_ck>;
 		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
 		reg = <0x01bc>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
@@ -372,10 +345,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0170>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
@@ -642,10 +613,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0158>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
@@ -653,10 +622,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
 		reg = <0x015c>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
@@ -664,10 +631,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0164>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_per_m2_ck: dpll_per_m2_ck {
@@ -675,10 +640,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0150>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
@@ -686,10 +649,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0150>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
@@ -697,10 +658,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0154>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_unipro1_ck: dpll_unipro1_ck {
@@ -723,10 +682,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_unipro1_ck>;
 		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0210>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_unipro2_ck: dpll_unipro2_ck {
@@ -749,10 +706,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_unipro2_ck>;
 		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
 		reg = <0x01d0>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	dpll_usb_ck: dpll_usb_ck {
@@ -775,10 +730,8 @@
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_usb_ck>;
 		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
 		reg = <0x0190>;
 		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
 	};
 
 	func_128m_clk: func_128m_clk {
@@ -851,6 +804,7 @@
 		clocks = <&dpll_per_h12x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x1420>;
+		ti,set-rate-parent;
 	};
 
 	dss_sys_clk: dss_sys_clk {
diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
new file mode 100644
index 000000000000..c701e8d16bbb
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
@@ -0,0 +1,236 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "LaCie d2 Network";
+	compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		front_button {
+			label = "Front Push Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rocker_sw_on {
+			label = "Power rocker switch (on|auto)";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rocker_sw_off {
+			label = "Power rocker switch (auto|off)";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata1_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+                #address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full512Kb";
+			reg = <0 0x80000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372b";
+		reg = <0x32>;
+	};
+
+	fan@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+
+		/* Not enough HW info */
+		status = "disabled";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;
+	pinctrl-names = "default";
+
+	pmx_board_id: pmx-board-id {
+		marvell,pins = "mpp0", "mpp1", "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp8", "mpp9", "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_fail: pmx-fan-fail {
+		marvell,pins = "mpp5";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP6: Red front LED
+	 * MPP16: Blue front LED blink control
+	 */
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp6", "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_led_active: pmx-sata0-led-active {
+		marvell,pins = "mpp14";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata0_power: pmx-sata0-power {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_led_active: pmx-sata1-led-active {
+		marvell,pins = "mpp15";
+		marvell,function = "sata1";
+	};
+
+	pmx_sata1_power: pmx-sata1-power {
+		marvell,pins = "mpp12";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * Non MPP GPIOs:
+	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+	 *  GPIO 23: Blue front LED off
+	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+	 */
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0_led_active
+		     &pmx_sata1_led_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
index 5ed6c1376901..89ff404a528c 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -6,8 +6,19 @@
  * warranty of any kind, whether express or implied.
  */
 
+/*
+ * TODO: add Orion USB device port init when kernel.org support is added.
+ * TODO: add flash write support: see below.
+ * TODO: add power-off support.
+ * TODO: add I2C EEPROM support.
+ */
+
 /dts-v1/;
-/include/ "orion5x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
 
 / {
 	model = "LaCie Ethernet Disk mini V2";
@@ -19,49 +30,84 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
 	};
 
-	ocp@f1000000 {
-		serial@12000 {
-			clock-frequency = <166666667>;
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_power_button>;
+		pinctrl-names = "default";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		button@1 {
 			label = "Power-on Switch";
-			linux,code = <116>; /* KEY_POWER */
-			gpios = <&gpio0 18 0>;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-	gpio_leds {
+	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_power_led>;
+		pinctrl-names = "default";
 
 		led@1 {
 			label = "power:blue";
-			gpios = <&gpio0 16 1>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
 
-&mdio {
+&devbus_bootcs {
 	status = "okay";
 
-	ethphy: ethernet-phy {
-		reg = <8>;
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full512Kb";
+			reg = <0 0x80000>;
+			read-only;
+		};
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &eth {
 	status = "okay";
 
@@ -69,3 +115,60 @@
 		phy-handle = <&ethphy>;
 	};
 };
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>;
+	pinctrl-names = "default";
+
+	pmx_power_button: pmx-power-button {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led: pmx-power-led {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led_ctrl: pmx-power-led-ctrl {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
new file mode 100644
index 000000000000..ff3484904294
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Maxtor Shared Storage II";
+	compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+                #address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@68 {
+		compatible = "st,m41t81";
+		reg = <0x68>;
+		pinctrl-0 = <&pmx_rtc>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_leds &pmx_misc>;
+	pinctrl-names = "default";
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp11", "mpp12";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP0: Power LED
+	 * MPP1: Error LED
+	 */
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp0", "mpp1";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP4: HDD ind. (Single/Dual)
+	 * MPP5: HD0 5V control
+	 * MPP6: HD0 12V control
+	 * MPP7: HD1 5V control
+	 * MPP8: HD1 12V control
+	 */
+	pmx_misc: pmx-misc {
+		marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_led_active: pmx-sata0-led-active {
+		marvell,pins = "mpp14";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata1_led_active: pmx-sata1-led-active {
+		marvell,pins = "mpp15";
+		marvell,function = "sata1";
+	};
+
+	/*
+	 * Non MPP GPIOs:
+	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+	 *  GPIO 23: Blue front LED off
+	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+	 */
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0_led_active
+		     &pmx_sata1_led_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
new file mode 100644
index 000000000000..d1ed71c60209
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "orion5x.dtsi"
+
+/ {
+	compatible = "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	soc {
+		compatible = "marvell,orion5x-88f5182-mbus", "simple-bus";
+
+		internal-regs {
+			pinctrl: pinctrl@10000 {
+				compatible = "marvell,88f5182-pinctrl";
+				reg = <0x10000 0x8>, <0x10050 0x4>;
+
+				pmx_sata0: pmx-sata0 {
+					marvell,pins = "mpp12", "mpp14";
+					marvell,function = "sata0";
+				};
+
+				pmx_sata1: pmx-sata1 {
+					marvell,pins = "mpp13", "mpp15";
+					marvell,function = "sata1";
+				};
+			};
+
+			core_clk: core-clocks@10030 {
+				compatible = "marvell,mv88f5182-core-clock";
+				reg = <0x10010 0x4>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x1500 0x20>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
new file mode 100644
index 000000000000..6fb052507b36
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Marvell Reference Design 88F5182 NAS";
+	compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+		         <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
+			 <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_debug_led>;
+		pinctrl-names = "default";
+
+		led@0 {
+			label = "rd88f5182:cpu";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+	};
+};
+
+&devbus_cs1 {
+	status = "okay";
+
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x1000000>;
+		bank-width = <1>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@68 {
+		pinctrl-0 = <&pmx_rtc>;
+		pinctrl-names = "default";
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
+		&pmx_pci_gpios>;
+	pinctrl-names = "default";
+
+	/*
+	 * MPP[20] PCI Clock to MV88F5182
+	 * MPP[21] PCI Clock to mini PCI CON11
+	 * MPP[22] USB 0 over current indication
+	 * MPP[23] USB 1 over current indication
+	 * MPP[24] USB 1 over current enable
+	 * MPP[25] USB 0 over current enable
+	 */
+
+	pmx_debug_led: pmx-debug_led {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_reset_switch: pmx-reset-switch {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_misc_gpios: pmx-misc-gpios {
+		marvell,pins = "mpp4", "mpp5";
+		marvell,function = "gpio";
+	};
+
+	pmx_pci_gpios: pmx-pci-gpios {
+		marvell,pins = "mpp6", "mpp7";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 174d89241f70..75cd01bd6024 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -6,7 +6,9 @@
  * warranty of any kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
 	model = "Marvell Orion5x SoC";
@@ -17,149 +19,214 @@
 		gpio0 = &gpio0;
 	};
 
-	intc: interrupt-controller {
-		compatible = "marvell,orion-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xf1020200 0x08>;
-	};
-
-	ocp@f1000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf1000000 0x4000000
-		          0xf2200000 0xf2200000 0x0000800>;
-		#address-cells = <1>;
+	soc {
+		#address-cells = <2>;
 		#size-cells = <1>;
+		controller = <&mbusc>;
 
-		gpio0: gpio@10100 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0x10100 0x40>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <6>, <7>, <8>, <9>;
-		};
-
-		spi@10600 {
-			compatible = "marvell,orion-spi";
+		devbus_bootcs: devbus-bootcs {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>;
 			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			reg = <0x10600 0x28>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
-		i2c@11000 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11000 0x20>;
+		devbus_cs0: devbus-cs0 {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>;
 			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <5>;
-			clock-frequency = <100000>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
-		serial@12000 {
-			compatible = "ns16550a";
-			reg = <0x12000 0x100>;
-			reg-shift = <2>;
-			interrupts = <3>;
-			/* set clock-frequency in board dts */
+		devbus_cs1: devbus-cs1 {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
-		serial@12100 {
-			compatible = "ns16550a";
-			reg = <0x12100 0x100>;
-			reg-shift = <2>;
-			interrupts = <4>;
-			/* set clock-frequency in board dts */
+		devbus_cs2: devbus-cs2 {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
-		wdt@20300 {
-			compatible = "marvell,orion-wdt";
-			reg = <0x20300 0x28>;
-			status = "okay";
-		};
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			gpio0: gpio@10100 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0x10100 0x40>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <6>, <7>, <8>, <9>;
+			};
 
-		ehci@50000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0x50000 0x1000>;
-			interrupts = <17>;
-			status = "disabled";
-		};
+			spi: spi@10600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				reg = <0x10600 0x28>;
+				status = "disabled";
+			};
 
-		xor@60900 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60900 0x100
-			       0x60b00 0x100>;
-			status = "okay";
+			i2c: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <5>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
 
-			xor00 {
-			      interrupts = <30>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+			uart0: serial@12000 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <3>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
 			};
-			xor01 {
-			      interrupts = <31>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+
+			uart1: serial@12100 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <4>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
 			};
-		};
 
-		eth: ethernet-controller@72000 {
-			compatible = "marvell,orion-eth";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72000 0x4000>;
-			marvell,tx-checksum-limit = <1600>;
-			status = "disabled";
+			bridge_intc: bridge-interrupt-ctrl@20110 {
+				compatible = "marvell,orion-bridge-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20110 0x8>;
+				interrupts = <0>;
+				marvell,#interrupts = <4>;
+			};
 
-			ethernet-port@0 {
-				compatible = "marvell,orion-eth-port";
-				reg = <0>;
-				/* overwrite MAC address in bootloader */
-				local-mac-address = [00 00 00 00 00 00];
-				/* set phy-handle property in board file */
+			intc: interrupt-controller@20200 {
+				compatible = "marvell,orion-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20200 0x08>;
 			};
-		};
 
-		mdio: mdio-bus@72004 {
-			compatible = "marvell,orion-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72004 0x84>;
-			interrupts = <22>;
-			status = "disabled";
+			timer: timer@20300 {
+				compatible = "marvell,orion-timer";
+				reg = <0x20300 0x20>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <1>, <2>;
+				clocks = <&core_clk 0>;
+			};
 
-			/* add phy nodes in board file */
-		};
+			wdt: wdt@20300 {
+				compatible = "marvell,orion-wdt";
+				reg = <0x20300 0x28>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <3>;
+				status = "okay";
+			};
 
-		sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <29>;
-			status = "disabled";
+			ehci0: ehci@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x1000>;
+				interrupts = <17>;
+				status = "disabled";
+			};
+
+			xor: dma-controller@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				status = "okay";
+
+				xor00 {
+				      interrupts = <30>;
+				      dmacap,memcpy;
+				      dmacap,xor;
+				};
+				xor01 {
+				      interrupts = <31>;
+				      dmacap,memcpy;
+				      dmacap,xor;
+				      dmacap,memset;
+				};
+			};
+
+			eth: ethernet-controller@72000 {
+				compatible = "marvell,orion-eth";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72000 0x4000>;
+				marvell,tx-checksum-limit = <1600>;
+				status = "disabled";
+
+				ethport: ethernet-port@0 {
+					compatible = "marvell,orion-eth-port";
+					reg = <0>;
+					interrupts = <21>;
+					/* overwrite MAC address in bootloader */
+					local-mac-address = [00 00 00 00 00 00];
+					/* set phy-handle property in board file */
+				};
+			};
+
+			mdio: mdio-bus@72004 {
+				compatible = "marvell,orion-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72004 0x84>;
+				interrupts = <22>;
+				status = "disabled";
+
+				/* add phy nodes in board file */
+			};
+
+			sata: sata@80000 {
+				compatible = "marvell,orion-sata";
+				reg = <0x80000 0x5000>;
+				interrupts = <29>;
+				status = "disabled";
+			};
+
+			ehci1: ehci@a0000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0xa0000 0x1000>;
+				interrupts = <12>;
+				status = "disabled";
+			};
 		};
 
-		crypto@90000 {
+		cesa: crypto@90000 {
 			compatible = "marvell,orion-crypto";
-			reg = <0x90000 0x10000>,
-			      <0xf2200000 0x800>;
+			reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
+			      <MBUS_ID(0x09, 0x00) 0x0 0x800>;
 			reg-names = "regs", "sram";
 			interrupts = <28>;
 			status = "okay";
 		};
-
-		ehci@a0000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0xa0000 0x1000>;
-			interrupts = <12>;
-			status = "disabled";
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index 0e219932d7cc..963b7e54ab15 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -48,7 +48,7 @@
 		ranges = <0x40000000 0x40000000 0x80000000>;
 
 		l2-cache-controller@80040000 {
-			compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
+			compatible = "arm,pl310-cache";
 			reg = <0x80040000 0x1000>;
 			interrupts = <59>;
 			arm,tag-latency = <1 1 1>;
@@ -76,9 +76,10 @@
 				#clock-cells = <1>;
 			};
 
-			reset-controller@88010000 {
+			rstc: reset-controller@88010000 {
 				compatible = "sirf,prima2-rstc";
 				reg = <0x88010000 0x1000>;
+				#reset-cells = <1>;
 			};
 
 			rsc-controller@88020000 {
@@ -200,6 +201,7 @@
 				compatible = "sirf,prima2-tick";
 				reg = <0xb0020000 0x1000>;
 				interrupts = <0>;
+				clocks = <&clks 11>;
 			};
 
 			nand@b0030000 {
@@ -223,8 +225,8 @@
 				interrupts = <17>;
 				fifosize = <128>;
 				clocks = <&clks 13>;
-				sirf,uart-dma-rx-channel = <21>;
-				sirf,uart-dma-tx-channel = <2>;
+				dmas = <&dmac1 5>, <&dmac0 2>;
+				dma-names = "rx", "tx";
 			};
 
 			uart1: uart@b0060000 {
@@ -243,8 +245,8 @@
 				interrupts = <19>;
 				fifosize = <128>;
 				clocks = <&clks 15>;
-				sirf,uart-dma-rx-channel = <6>;
-				sirf,uart-dma-tx-channel = <7>;
+				dmas = <&dmac0 6>, <&dmac0 7>;
+				dma-names = "rx", "tx";
 			};
 
 			usp0: usp@b0080000 {
@@ -254,8 +256,8 @@
 				interrupts = <20>;
 				fifosize = <128>;
 				clocks = <&clks 28>;
-				sirf,usp-dma-rx-channel = <17>;
-				sirf,usp-dma-tx-channel = <18>;
+				dmas = <&dmac1 1>, <&dmac1 2>;
+				dma-names = "rx", "tx";
 			};
 
 			usp1: usp@b0090000 {
@@ -265,8 +267,8 @@
 				interrupts = <21>;
 				fifosize = <128>;
 				clocks = <&clks 29>;
-				sirf,usp-dma-rx-channel = <14>;
-				sirf,usp-dma-tx-channel = <15>;
+				dmas = <&dmac0 14>, <&dmac0 15>;
+				dma-names = "rx", "tx";
 			};
 
 			usp2: usp@b00a0000 {
@@ -276,8 +278,8 @@
 				interrupts = <22>;
 				fifosize = <128>;
 				clocks = <&clks 30>;
-				sirf,usp-dma-rx-channel = <10>;
-				sirf,usp-dma-tx-channel = <11>;
+				dmas = <&dmac0 10>, <&dmac0 11>;
+				dma-names = "rx", "tx";
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -286,6 +288,7 @@
 				reg = <0xb00b0000 0x10000>;
 				interrupts = <12>;
 				clocks = <&clks 24>;
+				#dma-cells = <1>;
 			};
 
 			dmac1: dma-controller@b0160000 {
@@ -294,6 +297,7 @@
 				reg = <0xb0160000 0x10000>;
 				interrupts = <13>;
 				clocks = <&clks 25>;
+				#dma-cells = <1>;
 			};
 
 			vip@b00C0000 {
@@ -310,8 +314,9 @@
 				reg = <0xb00d0000 0x10000>;
 				interrupts = <15>;
 				sirf,spi-num-chipselects = <1>;
-				sirf,spi-dma-rx-channel = <25>;
-				sirf,spi-dma-tx-channel = <20>;
+				dmas = <&dmac1 9>,
+				     <&dmac1 4>;
+				dma-names = "rx", "tx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&clks 19>;
@@ -324,8 +329,9 @@
 				reg = <0xb0170000 0x10000>;
 				interrupts = <16>;
 				sirf,spi-num-chipselects = <1>;
-				sirf,spi-dma-rx-channel = <12>;
-				sirf,spi-dma-tx-channel = <13>;
+				dmas = <&dmac0 12>,
+				     <&dmac0 13>;
+				dma-names = "rx", "tx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&clks 20>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
new file mode 100644
index 000000000000..7c2441d526bc
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -0,0 +1,16 @@
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+	model = "Qualcomm APQ8064/IFC6410";
+	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
+
+	soc {
+		gsbi@16600000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				status = "ok";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
new file mode 100644
index 000000000000..935c3945fc5e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
@@ -0,0 +1 @@
+#include "qcom-apq8064.dtsi"
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
new file mode 100644
index 000000000000..92bf793622c3
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -0,0 +1,170 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	model = "Qualcomm APQ8064";
+	compatible = "qcom,apq8064";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		cpu@2 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+		};
+
+		cpu@3 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <1 1 0x301>,
+				     <1 2 0x301>,
+				     <1 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc2: clock-controller@20a8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc3: clock-controller@20b8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw2: regulator@20a9000 {
+			compatible = "qcom,saw2";
+			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw3: regulator@20b9000 {
+			compatible = "qcom,saw2";
+			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		gsbi7: gsbi@16600000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <0 158 0x0>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-apq8064";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 13ac3e222495..b4dfb01fe6fb 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -3,4 +3,43 @@
 / {
 	model = "Qualcomm APQ8074 Dragonboard";
 	compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+
+	soc {
+		serial@f991e000 {
+			status = "ok";
+		};
+
+		sdhci@f9824900 {
+			bus-width = <8>;
+			non-removable;
+			status = "ok";
+		};
+
+		sdhci@f98a4900 {
+			cd-gpios = <&msmgpio 62 0x1>;
+			bus-width = <4>;
+		};
+
+
+		pinctrl@fd510000 {
+			spi8_default: spi8_default {
+				mosi {
+					pins = "gpio45";
+					function = "blsp_spi8";
+				};
+				miso {
+					pins = "gpio46";
+					function = "blsp_spi8";
+				};
+				cs {
+					pins = "gpio47";
+					function = "blsp_spi8";
+				};
+				clk {
+					pins = "gpio48";
+					function = "blsp_spi8";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
new file mode 100644
index 000000000000..9dae3878b71d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
@@ -0,0 +1,6 @@
+#include "qcom-apq8084.dtsi"
+
+/ {
+	model = "Qualcomm APQ 8084-MTP";
+	compatible = "qcom,apq8084-mtp", "qcom,apq8084";
+};
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
new file mode 100644
index 000000000000..e3e009a5912b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -0,0 +1,179 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "Qualcomm APQ 8084";
+	compatible = "qcom,apq8084";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <0>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <1>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <2>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <3>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+		};
+
+		L2: l2-cache {
+			compatible = "qcom,arch-cache";
+			cache-level = <2>;
+			qcom,saw = <&saw_l2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 7 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 2 0xf08>,
+			     <1 3 0xf08>,
+			     <1 4 0xf08>,
+			     <1 1 0xf08>;
+		clock-frequency = <19200000>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <0 8 0x4>,
+					     <0 7 0x4>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <0 9 0x4>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <0 10 0x4>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <0 11 0x4>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <0 12 0x4>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <0 13 0x4>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <0 14 0x4>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		saw_l2: regulator@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		acc0: clock-controller@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc1: clock-controller@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc2: clock-controller@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc3: clock-controller@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 68a72f5507b9..45180adfadf1 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -1,63 +1,16 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+#include "qcom-msm8660.dtsi"
 
 / {
 	model = "Qualcomm MSM8660 SURF";
 	compatible = "qcom,msm8660-surf", "qcom,msm8660";
-	interrupt-parent = <&intc>;
-
-	intc: interrupt-controller@2080000 {
-		compatible = "qcom,msm-8660-qgic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = < 0x02080000 0x1000 >,
-		      < 0x02081000 0x1000 >;
-	};
-
-	timer@2000000 {
-		compatible = "qcom,scss-timer", "qcom,msm-timer";
-		interrupts = <1 0 0x301>,
-			     <1 1 0x301>,
-			     <1 2 0x301>;
-		reg = <0x02000000 0x100>;
-		clock-frequency = <27000000>,
-				  <32768>;
-		cpu-offset = <0x40000>;
-	};
-
-	msmgpio: gpio@800000 {
-		compatible = "qcom,msm-gpio";
-		reg = <0x00800000 0x4000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpio = <173>;
-		interrupts = <0 16 0x4>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gcc: clock-controller@900000 {
-		compatible = "qcom,gcc-msm8660";
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		reg = <0x900000 0x4000>;
-	};
-
-	serial@19c40000 {
-		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-		reg = <0x19c40000 0x1000>,
-		      <0x19c00000 0x1000>;
-		interrupts = <0 195 0x0>;
-		clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
-		clock-names = "core", "iface";
-	};
 
-	qcom,ssbi@500000 {
-		compatible = "qcom,ssbi";
-		reg = <0x500000 0x1000>;
-		qcom,controller-type = "pmic-arbiter";
+	soc {
+		gsbi@19c00000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@19c40000 {
+				status = "ok";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
new file mode 100644
index 000000000000..53837aaa2f72
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -0,0 +1,108 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	model = "Qualcomm MSM8660";
+	compatible = "qcom,msm8660";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "qcom,scorpion";
+			enable-method = "qcom,gcc-msm8660";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,scorpion";
+			enable-method = "qcom,gcc-msm8660";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2080000 {
+			compatible = "qcom,msm-8660-qgic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = < 0x02080000 0x1000 >,
+			      < 0x02081000 0x1000 >;
+		};
+
+		timer@2000000 {
+			compatible = "qcom,scss-timer", "qcom,msm-timer";
+			interrupts = <1 0 0x301>,
+				     <1 1 0x301>,
+				     <1 2 0x301>;
+			reg = <0x02000000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x40000>;
+		};
+
+		msmgpio: gpio@800000 {
+			compatible = "qcom,msm-gpio";
+			reg = <0x00800000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpio = <173>;
+			interrupts = <0 16 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-msm8660";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+		};
+
+		gsbi12: gsbi@19c00000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x19c00000 0x100>;
+			clocks = <&gcc GSBI12_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			serial@19c40000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x19c40000 0x1000>,
+				      <0x19c00000 0x1000>;
+				interrupts = <0 195 0x0>;
+				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 7c30de4fa302..8f75cc4c8340 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -1,70 +1,16 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include "qcom-msm8960.dtsi"
 
 / {
 	model = "Qualcomm MSM8960 CDP";
 	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
-	interrupt-parent = <&intc>;
-
-	intc: interrupt-controller@2000000 {
-		compatible = "qcom,msm-qgic2";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = < 0x02000000 0x1000 >,
-		      < 0x02002000 0x1000 >;
-	};
-
-	timer@200a000 {
-		compatible = "qcom,kpss-timer", "qcom,msm-timer";
-		interrupts = <1 1 0x301>,
-			     <1 2 0x301>,
-			     <1 3 0x301>;
-		reg = <0x0200a000 0x100>;
-		clock-frequency = <27000000>,
-				  <32768>;
-		cpu-offset = <0x80000>;
-	};
-
-	msmgpio: gpio@800000 {
-		compatible = "qcom,msm-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpio = <150>;
-		interrupts = <0 16 0x4>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		reg = <0x800000 0x4000>;
-	};
-
-	gcc: clock-controller@900000 {
-		compatible = "qcom,gcc-msm8960";
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		reg = <0x900000 0x4000>;
-	};
-
-	clock-controller@4000000 {
-		compatible = "qcom,mmcc-msm8960";
-		reg = <0x4000000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	serial@16440000 {
-		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-		reg = <0x16440000 0x1000>,
-		      <0x16400000 0x1000>;
-		interrupts = <0 154 0x0>;
-		clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-		clock-names = "core", "iface";
-	};
 
-	qcom,ssbi@500000 {
-		compatible = "qcom,ssbi";
-		reg = <0x500000 0x1000>;
-		qcom,controller-type = "pmic-arbiter";
+	soc {
+		gsbi@16400000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16440000 {
+				status = "ok";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
new file mode 100644
index 000000000000..5303e53e34dc
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -0,0 +1,155 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	model = "Qualcomm MSM8960";
+	compatible = "qcom,msm8960";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <1 14 0x304>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+		qcom,no-pc-write;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <1 1 0x301>,
+				     <1 2 0x301>,
+				     <1 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		msmgpio: gpio@800000 {
+			compatible = "qcom,msm-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpio = <150>;
+			interrupts = <0 16 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x800000 0x4000>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-msm8960";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+		};
+
+		clock-controller@4000000 {
+			compatible = "qcom,mmcc-msm8960";
+			reg = <0x4000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16400000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <0 154 0x0>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 9e5dadb101eb..69dca2aca25a 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -9,6 +9,68 @@
 	compatible = "qcom,msm8974";
 	interrupt-parent = <&intc>;
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <1 9 0xf04>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+		};
+
+		cpu@2 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+		};
+
+		cpu@3 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			qcom,saw = <&saw_l2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 7 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 2 0xf08>,
+			     <1 3 0xf08>,
+			     <1 4 0xf08>,
+			     <1 1 0xf08>;
+		clock-frequency = <19200000>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -23,15 +85,6 @@
 			      <0xf9002000 0x1000>;
 		};
 
-		timer {
-			compatible = "arm,armv7-timer";
-			interrupts = <1 2 0xf08>,
-				     <1 3 0xf08>,
-				     <1 4 0xf08>,
-				     <1 1 0xf08>;
-			clock-frequency = <19200000>;
-		};
-
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -91,6 +144,32 @@
 			};
 		};
 
+		saw_l2: regulator@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		acc0: clock-controller@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc1: clock-controller@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc2: clock-controller@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc3: clock-controller@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
 		restart@fc4ab000 {
 			compatible = "qcom,pshold";
 			reg = <0xfc4ab000 0x4>;
@@ -116,6 +195,46 @@
 			interrupts = <0 108 0x0>;
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		sdhci@f9824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+			interrupts = <0 123 0>, <0 138 0>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		sdhci@f98a4900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+			interrupts = <0 125 0>, <0 221 0>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		rng@f9bff000 {
+			compatible = "qcom,prng";
+			reg = <0xf9bff000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		msmgpio: pinctrl@fd510000 {
+			compatible = "qcom,msm8974-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 208 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/r7s72100-genmai-reference.dts b/arch/arm/boot/dts/r7s72100-genmai-reference.dts
deleted file mode 100644
index da19c70ed82b..000000000000
--- a/arch/arm/boot/dts/r7s72100-genmai-reference.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Device Tree Source for the Genmai board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-/include/ "r7s72100.dtsi"
-
-/ {
-	model = "Genmai";
-	compatible = "renesas,genmai-reference", "renesas,r7s72100";
-
-	chosen {
-		bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x08000000 0x08000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index b1deaf7e2e06..56849b55e1c2 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -1,7 +1,8 @@
 /*
  * Device Tree Source for the Genmai board
  *
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -15,6 +16,10 @@
 	model = "Genmai";
 	compatible = "renesas,genmai", "renesas,r7s72100";
 
+	aliases {
+		serial2 = &scif2;
+	};
+
 	chosen {
 		bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
 	};
@@ -29,3 +34,26 @@
 		#size-cells = <1>;
 	};
 };
+
+&extal_clk {
+	clock-frequency = <13330000>;
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "renesas,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&scif2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 46b82aa7dc4e..f50fbc8f3bd9 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -1,19 +1,141 @@
 /*
  * Device Tree Source for the r7s72100 SoC
  *
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
  * kind, whether express or implied.
  */
 
+#include <dt-bindings/clock/r7s72100-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
 / {
 	compatible = "renesas,r7s72100";
 	interrupt-parent = <&gic>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+	};
+
+	clocks {
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* External clocks */
+		extal_clk: extal_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			/* If clk present, value must be set by board */
+			clock-frequency = <0>;
+			clock-output-names = "extal";
+		};
+
+		usb_x1_clk: usb_x1_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			/* If clk present, value must be set by board */
+			clock-frequency = <0>;
+			clock-output-names = "usb_x1";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@fcfe0000 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-cpg-clocks",
+				     "renesas,rz-cpg-clocks";
+			reg = <0xfcfe0000 0x18>;
+			clocks = <&extal_clk>, <&usb_x1_clk>;
+			clock-output-names = "pll", "i", "g";
+		};
+
+		/* Fixed factor clocks */
+		b_clk: b_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+			clock-mult = <1>;
+			clock-div = <3>;
+			clock-output-names = "b";
+		};
+		p1_clk: p1_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+			clock-mult = <1>;
+			clock-div = <6>;
+			clock-output-names = "p1";
+		};
+		p0_clk: p0_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+			clock-mult = <1>;
+			clock-div = <12>;
+			clock-output-names = "p0";
+		};
+
+		/* MSTP clocks */
+		mstp3_clks: mstp3_clks@fcfe0420 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0420 4>;
+			clocks = <&p0_clk>;
+			clock-indices = <R7S72100_CLK_MTU2>;
+			clock-output-names = "mtu2";
+		};
+
+		mstp4_clks: mstp4_clks@fcfe0424 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0424 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
+				 <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SCIF0 R7S72100_CLK_SCIF1 R7S72100_CLK_SCIF2 R7S72100_CLK_SCIF3
+				R7S72100_CLK_SCIF4 R7S72100_CLK_SCIF5 R7S72100_CLK_SCIF6 R7S72100_CLK_SCIF7
+			>;
+			clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
+		};
+
+		mstp9_clks: mstp9_clks@fcfe0438 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0438 4>;
+			clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>;
+			clock-indices = <
+				R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3
+			>;
+			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3";
+		};
+
+		mstp10_clks: mstp10_clks@fcfe043c {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe043c 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
+				 <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SPI0 R7S72100_CLK_SPI1 R7S72100_CLK_SPI2 R7S72100_CLK_SPI3
+				R7S72100_CLK_SPI4
+			>;
+			clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -33,4 +155,242 @@
 		reg = <0xe8201000 0x1000>,
 			<0xe8202000 0x1000>;
 	};
+
+	i2c0: i2c@fcfee000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+		reg = <0xfcfee000 0x44>;
+		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 158 IRQ_TYPE_EDGE_RISING>,
+			     <0 159 IRQ_TYPE_EDGE_RISING>,
+			     <0 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 164 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@fcfee400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+		reg = <0xfcfee400 0x44>;
+		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 166 IRQ_TYPE_EDGE_RISING>,
+			     <0 167 IRQ_TYPE_EDGE_RISING>,
+			     <0 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 171 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 172 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@fcfee800 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+		reg = <0xfcfee800 0x44>;
+		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 174 IRQ_TYPE_EDGE_RISING>,
+			     <0 175 IRQ_TYPE_EDGE_RISING>,
+			     <0 176 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 177 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 178 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 179 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 180 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@fcfeec00 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+		reg = <0xfcfeec00 0x44>;
+		interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 182 IRQ_TYPE_EDGE_RISING>,
+			     <0 183 IRQ_TYPE_EDGE_RISING>,
+			     <0 184 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 185 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 186 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 187 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	scif0: serial@e8007000 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8007000 64>;
+		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 191 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 192 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial@e8007800 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8007800 64>;
+		interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 195 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 196 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 193 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif2: serial@e8008000 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8008000 64>;
+		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 199 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 200 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 197 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif3: serial@e8008800 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8008800 64>;
+		interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 203 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 204 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 201 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif4: serial@e8009000 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8009000 64>;
+		interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 207 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 208 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 205 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif5: serial@e8009800 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8009800 64>;
+		interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 211 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 212 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 209 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif6: serial@e800a000 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe800a000 64>;
+		interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 215 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 216 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 213 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif7: serial@e800a800 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe800a800 64>;
+		interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 219 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 220 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 217 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	spi0: spi@e800c800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800c800 0x24>;
+		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@e800d000 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800d000 0x24>;
+		interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 242 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 243 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@e800d800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800d800 0x24>;
+		interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 245 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi3: spi@e800e000 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800e000 0x24>;
+		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 248 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 249 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi4: spi@e800e800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800e800 0x24>;
+		interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 251 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 252 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 62d0211bd192..82c5ac825386 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -55,7 +55,6 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0000 0 0x200>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
@@ -95,7 +94,6 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0200 0 0x200>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 34 IRQ_TYPE_LEVEL_HIGH>,
@@ -136,7 +134,6 @@
 		dma0: dma-controller@e6700020 {
 			compatible = "renesas,shdma-r8a73a4";
 			reg = <0 0xe6700020 0 0x89e0>;
-			interrupt-parent = <&gic>;
 			interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
 					0 200 IRQ_TYPE_LEVEL_HIGH
 					0 201 IRQ_TYPE_LEVEL_HIGH
@@ -171,7 +168,6 @@
 		compatible = "renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
 			 <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -180,7 +176,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0 0xe6500000 0 0x428>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -190,7 +185,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0 0xe6510000 0 0x428>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -200,7 +194,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0 0xe6520000 0 0x428>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -210,7 +203,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0 0xe6530000 0 0x428>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -220,7 +212,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0 0xe6540000 0 0x428>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -230,7 +221,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0 0xe60b0000 0 0x428>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -240,7 +230,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0 0xe6550000 0 0x428>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -250,7 +239,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0 0xe6560000 0 0x428>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -260,7 +248,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0 0xe6570000 0 0x428>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -268,7 +255,6 @@
 	mmcif0: mmc@ee200000 {
 		compatible = "renesas,sh-mmcif";
 		reg = <0 0xee200000 0 0x80>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
 		reg-io-width = <4>;
 		status = "disabled";
@@ -277,7 +263,6 @@
 	mmcif1: mmc@ee220000 {
 		compatible = "renesas,sh-mmcif";
 		reg = <0 0xee220000 0 0x80>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
 		reg-io-width = <4>;
 		status = "disabled";
@@ -309,7 +294,6 @@
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee100000 0 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
 		cap-sd-highspeed;
 		status = "disabled";
@@ -318,7 +302,6 @@
 	sdhi1: sd@ee120000 {
 		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee120000 0 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
 		cap-sd-highspeed;
 		status = "disabled";
@@ -327,7 +310,6 @@
 	sdhi2: sd@ee140000 {
 		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee140000 0 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
 		cap-sd-highspeed;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 95a849bf921f..486007d7ffe4 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -11,6 +11,7 @@
 /dts-v1/;
 #include "r8a7740.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
 
@@ -77,26 +78,26 @@
 
 		power-key {
 			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "SW3";
 			gpio-key,wakeup;
 		};
 
 		back-key {
 			gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
-			linux,code = <158>;
+			linux,code = <KEY_BACK>;
 			label = "SW4";
 		};
 
 		menu-key {
 			gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
-			linux,code = <139>;
+			linux,code = <KEY_MENU>;
 			label = "SW5";
 		};
 
 		home-key {
 			gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
-			linux,code = <102>;
+			linux,code = <KEY_HOME>;
 			label = "SW6";
 		};
 	};
@@ -117,6 +118,16 @@
 		};
 	};
 
+	i2c2: i2c@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
+			 &pfc 91 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <5>;
+	};
+
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
@@ -147,6 +158,18 @@
 	};
 };
 
+&ether {
+	pinctrl-0 = <&ether_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy0>;
+	status = "ok";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 	touchscreen@55 {
@@ -166,10 +189,23 @@
 	};
 };
 
+&i2c2 {
+	status = "okay";
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
 &pfc {
 	pinctrl-0 = <&scifa1_pins>;
 	pinctrl-names = "default";
 
+	ether_pins: ether {
+		renesas,groups = "gether_mii", "gether_int";
+		renesas,function = "gether";
+	};
+
 	scifa1_pins: serial1 {
 		renesas,groups = "scifa1_data";
 		renesas,function = "scifa1";
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 8280884bfa59..55d29f4d2ed6 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -14,6 +14,7 @@
 
 / {
 	compatible = "renesas,r8a7740";
+	interrupt-parent = <&gic>;
 
 	cpus {
 		#address-cells = <1>;
@@ -22,13 +23,13 @@
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0x0>;
+			clock-frequency = <800000000>;
 		};
 	};
 
 	gic: interrupt-controller@c2800000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
-		#address-cells = <1>;
 		interrupt-controller;
 		reg = <0xc2800000 0x1000>,
 		      <0xc2000000 0x1000>;
@@ -49,7 +50,6 @@
 			<0xe6900020 1>,
 			<0xe6900040 1>,
 			<0xe6900060 1>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
 			      0 149 IRQ_TYPE_LEVEL_HIGH
 			      0 149 IRQ_TYPE_LEVEL_HIGH
@@ -70,7 +70,6 @@
 			<0xe6900024 1>,
 			<0xe6900044 1>,
 			<0xe6900064 1>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
 			      0 149 IRQ_TYPE_LEVEL_HIGH
 			      0 149 IRQ_TYPE_LEVEL_HIGH
@@ -91,7 +90,6 @@
 			<0xe6900028 1>,
 			<0xe6900048 1>,
 			<0xe6900068 1>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
 			      0 149 IRQ_TYPE_LEVEL_HIGH
 			      0 149 IRQ_TYPE_LEVEL_HIGH
@@ -112,7 +110,6 @@
 			<0xe690002c 1>,
 			<0xe690004c 1>,
 			<0xe690006c 1>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
 			      0 149 IRQ_TYPE_LEVEL_HIGH
 			      0 149 IRQ_TYPE_LEVEL_HIGH
@@ -123,12 +120,23 @@
 			      0 149 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	ether: ethernet@e9a00000 {
+		compatible = "renesas,gether-r8a7740";
+		reg = <0xe9a00000 0x800>,
+		      <0xe9a01800 0x800>;
+		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+		/* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */
+		phy-mode = "mii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	i2c0: i2c@fff20000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
 		reg = <0xfff20000 0x425>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH
 			      0 202 IRQ_TYPE_LEVEL_HIGH
 			      0 203 IRQ_TYPE_LEVEL_HIGH
@@ -139,9 +147,8 @@
 	i2c1: i2c@e6c20000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
 		reg = <0xe6c20000 0x425>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH
 			      0 71 IRQ_TYPE_LEVEL_HIGH
 			      0 72 IRQ_TYPE_LEVEL_HIGH
@@ -174,9 +181,8 @@
 	};
 
 	mmcif0: mmc@e6bd0000 {
-		compatible = "renesas,sh-mmcif";
+		compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
 		reg = <0xe6bd0000 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
 			      0 57 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
@@ -185,7 +191,6 @@
 	sdhi0: sd@e6850000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6850000 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
 			      0 118 IRQ_TYPE_LEVEL_HIGH
 			      0 119 IRQ_TYPE_LEVEL_HIGH>;
@@ -197,7 +202,6 @@
 	sdhi1: sd@e6860000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6860000 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
 			      0 122 IRQ_TYPE_LEVEL_HIGH
 			      0 123 IRQ_TYPE_LEVEL_HIGH>;
@@ -209,7 +213,6 @@
 	sdhi2: sd@e6870000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6870000 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
 			      0 126 IRQ_TYPE_LEVEL_HIGH
 			      0 127 IRQ_TYPE_LEVEL_HIGH>;
@@ -220,9 +223,8 @@
 
 	sh_fsi2: sound@fe1f0000 {
 		#sound-dai-cells = <1>;
-		compatible = "renesas,sh_fsi2";
+		compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
 		reg = <0xfe1f0000 0x400>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 9 0x4>;
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
index bb62c7a906f4..f76f6ec01e19 100644
--- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
@@ -17,6 +17,7 @@
 /dts-v1/;
 #include "r8a7778.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "bockw";
@@ -84,7 +85,7 @@
 
 	sdhi0_pins: sd0 {
 		renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
-				  "sdhi0_cd", "sdhi0_wp";
+				  "sdhi0_cd";
 		renesas,function = "sdhi0";
 	};
 
@@ -101,10 +102,25 @@
 	vmmc-supply = <&fixedregulator3v3>;
 	bus-width = <4>;
 	status = "okay";
+	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
 };
 
 &hspi0 {
 	pinctrl-0 = <&hspi0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl008k";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "data(spi)";
+			reg = <0x00000000 0x00100000>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index ddb3bd7a8838..3af0a2187493 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -20,6 +20,7 @@
 
 / {
 	compatible = "renesas,r8a7778";
+	interrupt-parent = <&gic>;
 
 	cpus {
 		cpu@0 {
@@ -52,7 +53,6 @@
 			<0xfe780024 4>,
 			<0xfe780044 4>,
 			<0xfe780064 4>;
-		interrupt-parent = <&gic>;
 		interrupts =   <0 27 IRQ_TYPE_LEVEL_HIGH
 				0 28 IRQ_TYPE_LEVEL_HIGH
 				0 29 IRQ_TYPE_LEVEL_HIGH
@@ -63,7 +63,6 @@
 	gpio0: gpio@ffc40000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc40000 0x2c>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -75,7 +74,6 @@
 	gpio1: gpio@ffc41000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc41000 0x2c>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -87,7 +85,6 @@
 	gpio2: gpio@ffc42000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc42000 0x2c>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -99,7 +96,6 @@
 	gpio3: gpio@ffc43000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc43000 0x2c>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -111,7 +107,6 @@
 	gpio4: gpio@ffc44000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc44000 0x2c>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -130,7 +125,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7778";
 		reg = <0xffc70000 0x1000>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -140,7 +134,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7778";
 		reg = <0xffc71000 0x1000>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -150,7 +143,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7778";
 		reg = <0xffc72000 0x1000>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -160,7 +152,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7778";
 		reg = <0xffc73000 0x1000>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -168,7 +159,6 @@
 	mmcif: mmc@ffe4e000 {
 		compatible = "renesas,sh-mmcif";
 		reg = <0xffe4e000 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -176,7 +166,6 @@
 	sdhi0: sd@ffe4c000 {
 		compatible = "renesas,sdhi-r8a7778";
 		reg = <0xffe4c000 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
@@ -186,7 +175,6 @@
 	sdhi1: sd@ffe4d000 {
 		compatible = "renesas,sdhi-r8a7778";
 		reg = <0xffe4d000 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
@@ -196,74 +184,36 @@
 	sdhi2: sd@ffe4f000 {
 		compatible = "renesas,sdhi-r8a7778";
 		reg = <0xffe4f000 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
 		status = "disabled";
 	};
 
-	i2c0: i2c@ffc70000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778";
-		reg = <0xffc70000 0x1000>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@ffc71000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778";
-		reg = <0xffc71000 0x1000>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@ffc72000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778";
-		reg = <0xffc72000 0x1000>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@ffc73000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778";
-		reg = <0xffc73000 0x1000>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
 	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc7000 0x18>;
-		interrupt-controller = <&gic>;
 		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	hspi1: spi@fffc8000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc8000 0x18>;
-		interrupt-controller = <&gic>;
 		interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	hspi2: spi@fffc6000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc6000 0x18>;
-		interrupt-controller = <&gic>;
 		interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
index 76f5eef7d1cc..b27c6373ff4d 100644
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
@@ -45,6 +45,7 @@
 		phy-mode = "mii";
 		interrupt-parent = <&irqpin0>;
 		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
 		reg-io-width = <4>;
 		vddvario-supply = <&fixedregulator3v3>;
 		vdd33a-supply = <&fixedregulator3v3>;
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index d0561d4c7c46..b517c8e6b420 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -15,6 +15,7 @@
 
 / {
 	compatible = "renesas,r8a7779";
+	interrupt-parent = <&gic>;
 
 	cpus {
 		#address-cells = <1>;
@@ -59,7 +60,6 @@
 	gpio0: gpio@ffc40000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc40000 0x2c>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -71,7 +71,6 @@
 	gpio1: gpio@ffc41000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc41000 0x2c>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -83,7 +82,6 @@
 	gpio2: gpio@ffc42000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc42000 0x2c>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -95,7 +93,6 @@
 	gpio3: gpio@ffc43000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc43000 0x2c>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -107,7 +104,6 @@
 	gpio4: gpio@ffc44000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc44000 0x2c>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -119,7 +115,6 @@
 	gpio5: gpio@ffc45000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc45000 0x2c>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -131,7 +126,6 @@
 	gpio6: gpio@ffc46000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc46000 0x2c>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -150,7 +144,6 @@
 			<0xfe780024 4>,
 			<0xfe780044 4>,
 			<0xfe780064 4>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
 			      0 28 IRQ_TYPE_LEVEL_HIGH
 			      0 29 IRQ_TYPE_LEVEL_HIGH
@@ -163,7 +156,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7779";
 		reg = <0xffc70000 0x1000>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -173,7 +165,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7779";
 		reg = <0xffc71000 0x1000>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -183,7 +174,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7779";
 		reg = <0xffc72000 0x1000>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -193,7 +183,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7779";
 		reg = <0xffc73000 0x1000>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
@@ -211,14 +200,12 @@
 	sata: sata@fc600000 {
 		compatible = "renesas,rcar-sata";
 		reg = <0xfc600000 0x2000>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	sdhi0: sd@ffe4c000 {
 		compatible = "renesas,sdhi-r8a7779";
 		reg = <0xffe4c000 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
@@ -228,7 +215,6 @@
 	sdhi1: sd@ffe4d000 {
 		compatible = "renesas,sdhi-r8a7779";
 		reg = <0xffe4d000 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
@@ -238,7 +224,6 @@
 	sdhi2: sd@ffe4e000 {
 		compatible = "renesas,sdhi-r8a7779";
 		reg = <0xffe4e000 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
@@ -248,7 +233,6 @@
 	sdhi3: sd@ffe4f000 {
 		compatible = "renesas,sdhi-r8a7779";
 		reg = <0xffe4f000 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
@@ -256,26 +240,29 @@
 	};
 
 	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc7000 0x18>;
-		interrupt-controller = <&gic>;
 		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	hspi1: spi@fffc8000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc8000 0x18>;
-		interrupt-controller = <&gic>;
 		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	hspi2: spi@fffc6000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc6000 0x18>;
-		interrupt-controller = <&gic>;
 		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 57569cba1528..dd2fe46073f2 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -1,7 +1,8 @@
 /*
  * Device Tree Source for the Lager board
  *
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -11,11 +12,17 @@
 /dts-v1/;
 #include "r8a7790.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Lager";
 	compatible = "renesas,lager", "renesas,r8a7790";
 
+	aliases {
+		serial6 = &scif0;
+		serial7 = &scif1;
+	};
+
 	chosen {
 		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
 	};
@@ -35,6 +42,39 @@
 		#size-cells = <1>;
 	};
 
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button@1 {
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+		};
+		button@3 {
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+		button@4 {
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led6 {
@@ -56,6 +96,54 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator@2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi2: regulator@3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi2: regulator@4 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
 };
 
 &extal_clk {
@@ -63,23 +151,75 @@
 };
 
 &pfc {
-	pinctrl-0 = <&scif0_pins &scif1_pins>;
+	pinctrl-0 = <&du_pins>;
 	pinctrl-names = "default";
 
+	du_pins: du {
+		renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
+		renesas,function = "du";
+	};
+
 	scif0_pins: serial0 {
 		renesas,groups = "scif0_data";
 		renesas,function = "scif0";
 	};
 
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq0";
+		renesas,function = "intc";
+	};
+
 	scif1_pins: serial1 {
 		renesas,groups = "scif1_data";
 		renesas,function = "scif1";
 	};
 
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi2_pins: sd2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+
 	mmc1_pins: mmc1 {
 		renesas,groups = "mmc1_data8", "mmc1_ctrl";
 		renesas,function = "mmc1";
 	};
+
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+
+	msiof1_pins: spi2 {
+		renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
+				 "msiof1_tx";
+		renesas,function = "msiof1";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "ok";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
 };
 
 &mmcif1 {
@@ -91,3 +231,89 @@
 	non-removable;
 	status = "okay";
 };
+
+&sata1 {
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl512s";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "loader";
+			reg = <0x00000000 0x00040000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "user";
+			reg = <0x00040000 0x00400000>;
+			read-only;
+		};
+		partition@440000 {
+			label = "flash";
+			reg = <0x00440000 0x03bc0000>;
+		};
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&msiof1 {
+	pinctrl-0 = <&msiof1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	pmic: pmic@0 {
+		compatible = "renesas,r2a11302ft";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 71b1251f79c7..7ff29601f962 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1,7 +1,8 @@
 /*
  * Device Tree Source for the r8a7790 SoC
  *
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -18,6 +19,22 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &iic0;
+		i2c5 = &iic1;
+		i2c6 = &iic2;
+		i2c7 = &iic3;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		spi3 = &msiof2;
+		spi4 = &msiof3;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -94,80 +111,80 @@
 	gpio0: gpio@e6050000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6050000 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
 	};
 
 	gpio1: gpio@e6051000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6051000 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 32 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
 	};
 
 	gpio2: gpio@e6052000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6052000 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 64 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
 	};
 
 	gpio3: gpio@e6053000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6053000 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 96 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
 	};
 
 	gpio4: gpio@e6054000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6054000 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 128 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
 	};
 
 	gpio5: gpio@e6055000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6055000 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 160 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
 	};
 
 	thermal@e61f0000 {
 		compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
 	};
 
 	timer {
@@ -183,7 +200,6 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0000 0 0x200>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
@@ -195,7 +211,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7790";
 		reg = <0 0xe6508000 0 0x40>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
 		status = "disabled";
@@ -206,7 +221,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7790";
 		reg = <0 0xe6518000 0 0x40>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
 		status = "disabled";
@@ -217,7 +231,6 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7790";
 		reg = <0 0xe6530000 0 0x40>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
 		status = "disabled";
@@ -228,16 +241,54 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7790";
 		reg = <0 0xe6540000 0 0x40>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
 		status = "disabled";
 	};
 
+	iic0: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x425>;
+		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
+		status = "disabled";
+	};
+
+	iic1: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x425>;
+		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
+		status = "disabled";
+	};
+
+	iic2: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe6520000 0 0x425>;
+		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
+		status = "disabled";
+	};
+
+	iic3: i2c@e60b0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x425>;
+		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
+		status = "disabled";
+	};
+
 	mmcif0: mmcif@ee200000 {
 		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
 		reg = <0 0xee200000 0 0x80>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
 		reg-io-width = <4>;
@@ -247,7 +298,6 @@
 	mmcif1: mmc@ee220000 {
 		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
 		reg = <0 0xee220000 0 0x80>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
 		reg-io-width = <4>;
@@ -262,7 +312,6 @@
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee100000 0 0x200>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
 		cap-sd-highspeed;
@@ -272,7 +321,6 @@
 	sdhi1: sd@ee120000 {
 		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee120000 0 0x200>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
 		cap-sd-highspeed;
@@ -282,7 +330,6 @@
 	sdhi2: sd@ee140000 {
 		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee140000 0 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
 		cap-sd-highspeed;
@@ -292,13 +339,129 @@
 	sdhi3: sd@ee160000 {
 		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee160000 0 0x100>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
 
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		reg = <0 0xe6c40000 0 64>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		reg = <0 0xe6c50000 0 64>;
+		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		reg = <0 0xe6c60000 0 64>;
+		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb0: serial@e6c20000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		reg = <0 0xe6c20000 0 64>;
+		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb1: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		reg = <0 0xe6c30000 0 64>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb2: serial@e6ce0000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		reg = <0 0xe6ce0000 0 64>;
+		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif0: serial@e6e60000 {
+		compatible = "renesas,scif-r8a7790", "renesas,scif";
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial@e6e68000 {
+		compatible = "renesas,scif-r8a7790", "renesas,scif";
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif0: serial@e62c0000 {
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+		reg = <0 0xe62c0000 0 96>;
+		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif1: serial@e62c8000 {
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+		reg = <0 0xe62c8000 0 96>;
+		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	ether: ethernet@ee700000 {
+		compatible = "renesas,ether-r8a7790";
+		reg = <0 0xee700000 0 0x400>;
+		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+		phy-mode = "rmii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	sata0: sata@ee300000 {
+		compatible = "renesas,sata-r8a7790";
+		reg = <0 0xee300000 0 0x2000>;
+		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
+		status = "disabled";
+	};
+
+	sata1: sata@ee500000 {
+		compatible = "renesas,sata-r8a7790";
+		reg = <0 0xee500000 0 0x2000>;
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -313,6 +476,29 @@
 			clock-output-names = "extal";
 		};
 
+		/*
+		 * The external audio clocks are configured as 0 Hz fixed frequency clocks by
+		 * default. Boards that provide audio clocks should override them.
+		 */
+		audio_clk_a: audio_clk_a {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "audio_clk_a";
+		};
+		audio_clk_b: audio_clk_b {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "audio_clk_b";
+		};
+		audio_clk_c: audio_clk_c {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "audio_clk_c";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7790-cpg-clocks",
@@ -542,7 +728,7 @@
 			renesas,clock-indices = <
 				R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
 				R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1
-				R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY
+				R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
 			>;
 			clock-output-names =
 				"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
@@ -566,18 +752,19 @@
 		mstp3_clks: mstp3_clks@e615013c {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>,
-				 <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>,
-				 <&mmc0_clk>, <&rclk_clk>;
+			clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>,
+				 <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
+				 <&hp_clk>, <&hp_clk>, <&rclk_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
-				R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
-				R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0
-				R8A7790_CLK_MMCIF0 R8A7790_CLK_CMT1
+				R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
+				R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
+				R8A7790_CLK_IIC0 R8A7790_CLK_IIC1 R8A7790_CLK_CMT1
 			>;
 			clock-output-names =
-				"tpu0", "mmcif1", "sdhi3", "sdhi2",
-				"sdhi1", "sdhi0", "mmcif0", "cmt1";
+				"iic2", "tpu0", "mmcif1", "sdhi3",
+				"sdhi2", "sdhi1", "sdhi0", "mmcif0",
+				"iic0", "iic1", "cmt1";
 		};
 		mstp5_clks: mstp5_clks@e6150144 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -607,24 +794,86 @@
 		mstp8_clks: mstp8_clks@e6150990 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&p_clk>;
+			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>,
+				 <&zs_clk>, <&zs_clk>;
 			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7790_CLK_ETHER>;
-			clock-output-names = "ether";
+			renesas,clock-indices = <
+				R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 R8A7790_CLK_VIN1
+				R8A7790_CLK_VIN0 R8A7790_CLK_ETHER R8A7790_CLK_SATA1
+				R8A7790_CLK_SATA0
+			>;
+			clock-output-names =
+				"vin3", "vin2", "vin1", "vin0", "ether", "sata1", "sata0";
 		};
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>,
-				 <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>,
+				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
-				R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD
-				R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1
-				R8A7790_CLK_I2C0
+				R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3
+				R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0
+				R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS
+				R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0
 			>;
 			clock-output-names =
-				"rcan1", "rcan0", "qspi_mod", "i2c3", "i2c2", "i2c1", "i2c0";
+				"gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
+				"rcan1", "rcan0", "qspi_mod", "iic3",
+				"i2c3", "i2c2", "i2c1", "i2c0";
 		};
 	};
+
+	qspi: spi@e6b10000 {
+		compatible = "renesas,qspi-r8a7790", "renesas,qspi";
+		reg = <0 0xe6b10000 0 0x2c>;
+		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof0: spi@e6e20000 {
+		compatible = "renesas,msiof-r8a7790";
+		reg = <0 0xe6e20000 0 0x0064>;
+		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof1: spi@e6e10000 {
+		compatible = "renesas,msiof-r8a7790";
+		reg = <0 0xe6e10000 0 0x0064>;
+		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof2: spi@e6e00000 {
+		compatible = "renesas,msiof-r8a7790";
+		reg = <0 0xe6e00000 0 0x0064>;
+		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof3: spi@e6c90000 {
+		compatible = "renesas,msiof-r8a7790";
+		reg = <0 0xe6c90000 0 0x0064>;
+		interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
new file mode 100644
index 000000000000..cc6d992e8db2
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -0,0 +1,219 @@
+/*
+ * Device Tree Source for the Henninger board
+ *
+ * Copyright (C) 2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Henninger";
+	compatible = "renesas,henninger", "renesas,r8a7791";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	vcc_sdhi0: regulator@0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator@1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi2: regulator@2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vccq_sdhi2: regulator@3 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif0_pins: serial0 {
+		renesas,groups = "scif0_data_d";
+		renesas,function = "scif0";
+	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq0";
+		renesas,function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi2_pins: sd2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+
+	msiof0_pins: spi1 {
+		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
+				 "msiof0_tx";
+		renesas,function = "msiof0";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "ok";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&sata0 {
+       status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl512s";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "loader_prg";
+			reg = <0x00000000 0x00040000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "user_prg";
+			reg = <0x00040000 0x00400000>;
+			read-only;
+		};
+		partition@440000 {
+			label = "flash_fs";
+			reg = <0x00440000 0x03bc0000>;
+		};
+	};
+};
+
+&msiof0 {
+	pinctrl-0 = <&msiof0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	pmic@0 {
+		compatible = "renesas,r2a11302ft";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts b/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
deleted file mode 100644
index 588ca17ea1f0..000000000000
--- a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Device Tree Source for the Koelsch board
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Koelsch";
-	compatible = "renesas,koelsch-reference", "renesas,r8a7791";
-
-	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x80000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-a {
-			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-			linux,code = <30>;
-			label = "SW30";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <48>;
-			label = "SW31";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-			linux,code = <46>;
-			label = "SW32";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-d {
-			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-			linux,code = <32>;
-			label = "SW33";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-e {
-			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-			linux,code = <18>;
-			label = "SW34";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-f {
-			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-			linux,code = <33>;
-			label = "SW35";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-g {
-			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-			linux,code = <34>;
-			label = "SW36";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		};
-		led7 {
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		};
-		led8 {
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pfc {
-	pinctrl-0 = <&scif0_pins &scif1_pins>;
-	pinctrl-names = "default";
-
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
-	};
-
-	scif1_pins: serial1 {
-		renesas,groups = "scif1_data_d";
-		renesas,function = "scif1";
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index fd556c3483e3..05d44f9b202f 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -2,7 +2,8 @@
  * Device Tree Source for the Koelsch board
  *
  * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -12,18 +13,29 @@
 /dts-v1/;
 #include "r8a7791.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Koelsch";
 	compatible = "renesas,koelsch", "renesas,r8a7791";
 
+	aliases {
+		serial6 = &scif0;
+		serial7 = &scif1;
+	};
+
 	chosen {
 		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
 	};
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0 0x40000000 0 0x80000000>;
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
 	};
 
 	lbsc {
@@ -31,6 +43,88 @@
 		#size-cells = <1>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-a {
+			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			label = "SW30";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_B>;
+			label = "SW31";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_C>;
+			label = "SW32";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-d {
+			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_D>;
+			label = "SW33";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-e {
+			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_E>;
+			label = "SW34";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-f {
+			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F>;
+			label = "SW35";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-g {
+			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_G>;
+			label = "SW36";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led6 {
@@ -43,16 +137,117 @@
 			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	vcc_sdhi0: regulator@0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator@1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi1: regulator@2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator@3 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi2: regulator@4 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi2: regulator@5 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
 };
 
 &extal_clk {
 	clock-frequency = <20000000>;
 };
 
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "renesas,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
 &pfc {
-	pinctrl-0 = <&scif0_pins &scif1_pins>;
+	pinctrl-0 = <&du_pins>;
 	pinctrl-names = "default";
 
+	i2c2_pins: i2c2 {
+		renesas,groups = "i2c2";
+		renesas,function = "i2c2";
+	};
+
+	du_pins: du {
+		renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
+		renesas,function = "du";
+	};
+
 	scif0_pins: serial0 {
 		renesas,groups = "scif0_data_d";
 		renesas,function = "scif0";
@@ -62,4 +257,154 @@
 		renesas,groups = "scif1_data_d";
 		renesas,function = "scif1";
 	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq0";
+		renesas,function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi1_pins: sd1 {
+		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+		renesas,function = "sdhi1";
+	};
+
+	sdhi2_pins: sd2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+
+	msiof0_pins: spi1 {
+		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
+				 "msiof0_tx";
+		renesas,function = "msiof0";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "ok";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl512s";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "loader";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+		partition@80000 {
+			label = "bootenv";
+			reg = <0x00080000 0x00080000>;
+			read-only;
+		};
+		partition@100000 {
+			label = "data";
+			reg = <0x00100000 0x03f00000>;
+		};
+	};
+};
+
+&msiof0 {
+	pinctrl-0 = <&msiof0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	pmic: pmic@0 {
+		compatible = "renesas,r2a11302ft";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 19c65509a22d..8d7ffaeff6e0 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -2,7 +2,8 @@
  * Device Tree Source for the r8a7791 SoC
  *
  * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -19,6 +20,22 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		spi3 = &msiof2;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -27,14 +44,14 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
-			clock-frequency = <1300000000>;
+			clock-frequency = <1500000000>;
 		};
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
-			clock-frequency = <1300000000>;
+			clock-frequency = <1500000000>;
 		};
 	};
 
@@ -53,104 +70,104 @@
 	gpio0: gpio@e6050000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6050000 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
 	};
 
 	gpio1: gpio@e6051000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6051000 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 32 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
 	};
 
 	gpio2: gpio@e6052000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6052000 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 64 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
 	};
 
 	gpio3: gpio@e6053000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6053000 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 96 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
 	};
 
 	gpio4: gpio@e6054000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6054000 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 128 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
 	};
 
 	gpio5: gpio@e6055000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6055000 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 160 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
 	};
 
 	gpio6: gpio@e6055400 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6055400 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 192 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
 	};
 
 	gpio7: gpio@e6055800 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6055800 0 0x50>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 224 26>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
 	};
 
 	thermal@e61f0000 {
 		compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
 	};
 
 	timer {
@@ -166,7 +183,6 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0000 0 0x200>;
-		interrupt-parent = <&gic>;
 		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
@@ -179,12 +195,318 @@
 			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	/* The memory map in the User's Manual maps the cores to bus numbers */
+	i2c0: i2c@e6508000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7791";
+		reg = <0 0xe6508000 0 0x40>;
+		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6518000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7791";
+		reg = <0 0xe6518000 0 0x40>;
+		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7791";
+		reg = <0 0xe6530000 0 0x40>;
+		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7791";
+		reg = <0 0xe6540000 0 0x40>;
+		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7791";
+		reg = <0 0xe6520000 0 0x40>;
+		interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@e6528000 {
+		/* doesn't need pinmux */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7791";
+		reg = <0 0xe6528000 0 0x40>;
+		interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@e60b0000 {
+		/* doesn't need pinmux */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x425>;
+		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x425>;
+		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x425>;
+		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
+		status = "disabled";
+	};
+
 	pfc: pfc@e6060000 {
 		compatible = "renesas,pfc-r8a7791";
 		reg = <0 0xe6060000 0 0x250>;
 		#gpio-range-cells = <3>;
 	};
 
+	sdhi0: sd@ee100000 {
+		compatible = "renesas,sdhi-r8a7791";
+		reg = <0 0xee100000 0 0x200>;
+		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
+		status = "disabled";
+	};
+
+	sdhi1: sd@ee140000 {
+		compatible = "renesas,sdhi-r8a7791";
+		reg = <0 0xee140000 0 0x100>;
+		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
+		status = "disabled";
+	};
+
+	sdhi2: sd@ee160000 {
+		compatible = "renesas,sdhi-r8a7791";
+		reg = <0 0xee160000 0 0x100>;
+		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
+		status = "disabled";
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c40000 0 64>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c50000 0 64>;
+		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c60000 0 64>;
+		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa3: serial@e6c70000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c70000 0 64>;
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa4: serial@e6c78000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c78000 0 64>;
+		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa5: serial@e6c80000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c80000 0 64>;
+		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb0: serial@e6c20000 {
+		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		reg = <0 0xe6c20000 0 64>;
+		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb1: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		reg = <0 0xe6c30000 0 64>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb2: serial@e6ce0000 {
+		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		reg = <0 0xe6ce0000 0 64>;
+		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif0: serial@e6e60000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial@e6e68000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif2: serial@e6e58000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		reg = <0 0xe6e58000 0 64>;
+		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif3: serial@e6ea8000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		reg = <0 0xe6ea8000 0 64>;
+		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif4: serial@e6ee0000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		reg = <0 0xe6ee0000 0 64>;
+		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif5: serial@e6ee8000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		reg = <0 0xe6ee8000 0 64>;
+		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif0: serial@e62c0000 {
+		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		reg = <0 0xe62c0000 0 96>;
+		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif1: serial@e62c8000 {
+		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		reg = <0 0xe62c8000 0 96>;
+		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif2: serial@e62d0000 {
+		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		reg = <0 0xe62d0000 0 96>;
+		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	ether: ethernet@ee700000 {
+		compatible = "renesas,ether-r8a7791";
+		reg = <0 0xee700000 0 0x400>;
+		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
+		phy-mode = "rmii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	sata0: sata@ee300000 {
+		compatible = "renesas,sata-r8a7791";
+		reg = <0 0xee300000 0 0x2000>;
+		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
+		status = "disabled";
+	};
+
+	sata1: sata@ee500000 {
+		compatible = "renesas,sata-r8a7791";
+		reg = <0 0xee500000 0 0x2000>;
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -411,7 +733,7 @@
 			renesas,clock-indices = <
 				R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
 				R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1
-				R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY
+				R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S
 			>;
 			clock-output-names =
 				"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
@@ -429,21 +751,22 @@
 				R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2
 			>;
 			clock-output-names =
-				"scifa2", "scifa1", "scifa0", "misof2", "scifb0",
+				"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
 				"scifb1", "msiof1", "scifb2";
 		};
 		mstp3_clks: mstp3_clks@e615013c {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>,
-				<&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>;
+			clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
+				 <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
-				R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1
-				R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1
+				R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0
+				R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1 R8A7791_CLK_CMT1
 			>;
 			clock-output-names =
-				"tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1";
+				"tpu0", "sdhi2", "sdhi1", "sdhi0",
+				"mmcif0", "i2c7", "i2c8", "cmt1";
 		};
 		mstp5_clks: mstp5_clks@e6150144 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -456,44 +779,54 @@
 		mstp7_clks: mstp7_clks@e615014c {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
-			clocks = <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
+			clocks = <&mp_clk>,  <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
 				 <&zx_clk>, <&zx_clk>, <&zx_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
-				R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
+				R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
 				R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0
 				R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1
 				R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0
 				R8A7791_CLK_LVDS0
 			>;
 			clock-output-names =
-				"hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0",
+				"ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0",
 				"scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0";
 		};
 		mstp8_clks: mstp8_clks@e6150990 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&p_clk>;
+			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, <&zs_clk>,
+				 <&zs_clk>;
 			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7791_CLK_ETHER>;
-			clock-output-names = "ether";
+			renesas,clock-indices = <
+				R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
+				R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
+			>;
+			clock-output-names =
+				"vin2", "vin1", "vin0", "ether", "sata1", "sata0";
 		};
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>,
-				 <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				 <&p_clk>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>,
+				 <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+				 <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
-				R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD
-				R8A7791_CLK_I2C4 R8A7791_CLK_I2C4 R8A7791_CLK_I2C3
-				R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
+				R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4
+				R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0
+				R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5
+				R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2
+				R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
 			>;
 			clock-output-names =
-				"rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3",
-				"i2c2", "i2c1", "i2c0";
+				"gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
+				"rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2",
+				"i2c1", "i2c0";
 		};
 		mstp11_clks: mstp11_clks@e615099c {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -506,4 +839,45 @@
 			clock-output-names = "scifa3", "scifa4", "scifa5";
 		};
 	};
+
+	qspi: spi@e6b10000 {
+		compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+		reg = <0 0xe6b10000 0 0x2c>;
+		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof0: spi@e6e20000 {
+		compatible = "renesas,msiof-r8a7791";
+		reg = <0 0xe6e20000 0 0x0064>;
+		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof1: spi@e6e10000 {
+		compatible = "renesas,msiof-r8a7791";
+		reg = <0 0xe6e10000 0 0x0064>;
+		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof2: spi@e6e00000 {
+		compatible = "renesas,msiof-r8a7791";
+		reg = <0 0xe6e00000 0 0x0064>;
+		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 035df4053c21..afb327322a4a 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -18,6 +18,7 @@
 
 / {
 	model = "bq Curie 2";
+	compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
 
 	memory {
 		reg = <0x60000000 0x40000000>;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index be5d2b09a363..4387cfd420ba 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -24,6 +24,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "rockchip,rk3066-smp";
 
 		cpu@0 {
 			device_type = "cpu";
@@ -64,9 +65,22 @@
 			clock-names = "timer", "pclk";
 		};
 
+		sram: sram@10080000 {
+			compatible = "mmio-sram";
+			reg = <0x10080000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x10080000 0x10000>;
+
+			smp-sram@0 {
+				compatible = "rockchip,rk3066-smp-sram";
+				reg = <0x0 0x50>;
+			};
+		};
+
 		pinctrl@20008000 {
 			compatible = "rockchip,rk3066a-pinctrl";
-			reg = <0x20008000 0x150>;
+			rockchip,grf = <&grf>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 3ba1968a70ab..a5eee55079cb 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -17,6 +17,7 @@
 
 / {
 	model = "Radxa Rock";
+	compatible = "radxa,rock", "rockchip,rk3188";
 
 	memory {
 		reg = <0x60000000 0x80000000>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 1a26b03b3649..238c996d4a7f 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -24,6 +24,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "rockchip,rk3066-smp";
 
 		cpu@0 {
 			device_type = "cpu";
@@ -60,19 +61,31 @@
 			interrupts = <GIC_PPI 13 0xf04>;
 		};
 
+		sram: sram@10080000 {
+			compatible = "mmio-sram";
+			reg = <0x10080000 0x8000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x10080000 0x8000>;
+
+			smp-sram@0 {
+				compatible = "rockchip,rk3066-smp-sram";
+				reg = <0x0 0x50>;
+			};
+		};
+
 		pinctrl@20008000 {
 			compatible = "rockchip,rk3188-pinctrl";
-			reg = <0x20008000 0xa0>,
-			      <0x20008164 0x1a0>;
-			reg-names = "base", "pull";
+			rockchip,grf = <&grf>;
+			rockchip,pmu = <&pmu>;
+
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 
 			gpio0: gpio0@0x2000a000 {
 				compatible = "rockchip,rk3188-gpio-bank0";
-				reg = <0x2000a000 0x100>,
-				      <0x20004064 0x8>;
+				reg = <0x2000a000 0x100>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk_gates8 9>;
 
@@ -136,7 +149,7 @@
 
 			uart0 {
 				uart0_xfer: uart0-xfer {
-					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>,
+					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
 							<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
 				};
 
@@ -151,7 +164,7 @@
 
 			uart1 {
 				uart1_xfer: uart1-xfer {
-					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>,
+					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
 							<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
 				};
 
@@ -166,7 +179,7 @@
 
 			uart2 {
 				uart2_xfer: uart2-xfer {
-					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>,
+					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
 							<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
 				};
 				/* no rts / cts for uart2 */
@@ -174,7 +187,7 @@
 
 			uart3 {
 				uart3_xfer: uart3-xfer {
-					rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>,
+					rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
 							<RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
 				};
 
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 0fcbcfd67de2..2adf1cc9e85d 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -26,6 +26,21 @@
 		compatible = "simple-bus";
 		ranges;
 
+		scu@1013c000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x1013c000 0x100>;
+		};
+
+		pmu: pmu@20004000 {
+			compatible = "rockchip,rk3066-pmu", "syscon";
+			reg = <0x20004000 0x100>;
+		};
+
+		grf: grf@20008000 {
+			compatible = "syscon";
+			reg = <0x20008000 0x200>;
+		};
+
 		gic: interrupt-controller@1013d000 {
 			compatible = "arm,cortex-a9-gic";
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index 59594cf15998..ea92fd69529a 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -19,6 +19,19 @@
 		reg =  <0x30000000 0x4000000>;
 	};
 
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		xti: xti {
+			compatible = "fixed-clock";
+			clock-frequency = <12000000>;
+			clock-output-names = "xti";
+			#clock-cells = <0>;
+		};
+	};
+
 	serial@50000000 {
 		status = "okay";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index e6555bdd81b8..955e4a4f8c31 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/clock/s3c2443.h>
 #include "s3c24xx.dtsi"
 #include "s3c2416-pinctrl.dtsi"
 
@@ -28,26 +29,53 @@
 		compatible = "samsung,s3c2416-irq";
 	};
 
+	clocks: clock-controller@0x4c000000 {
+		compatible = "samsung,s3c2416-clock";
+		reg = <0x4c000000 0x40>;
+		#clock-cells = <1>;
+	};
+
 	pinctrl@56000000 {
 		compatible = "samsung,s3c2416-pinctrl";
 	};
 
+	timer@51000000 {
+		clocks = <&clocks PCLK_PWM>;
+		clock-names = "timers";
+	};
+
 	serial@50000000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@50004000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@50008000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@5000C000 {
 		compatible = "samsung,s3c2440-uart";
 		reg = <0x5000C000 0x4000>;
 		interrupts = <1 18 24 4>, <1 18 25 4>;
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+				<&clocks SCLK_UART>;
 		status = "disabled";
 	};
 
@@ -55,6 +83,10 @@
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4AC00000 0x100>;
 		interrupts = <0 0 21 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+				<&clocks MUX_HSMMC0>;
 		status = "disabled";
 	};
 
@@ -62,18 +94,28 @@
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4A800000 0x100>;
 		interrupts = <0 0 20 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+				<&clocks MUX_HSMMC1>;
 		status = "disabled";
 	};
 
 	watchdog@53000000 {
 		interrupts = <1 9 27 3>;
+		clocks = <&clocks PCLK_WDT>;
+		clock-names = "watchdog";
 	};
 
 	rtc@57000000 {
 		compatible = "samsung,s3c2416-rtc";
+		clocks = <&clocks PCLK_RTC>;
+		clock-names = "rtc";
 	};
 
 	i2c@54000000 {
 		compatible = "samsung,s3c2440-i2c";
+		clocks = <&clocks PCLK_I2C0>;
+		clock-names = "i2c";
 	};
 };
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 3d5faf85f51b..e0b15a6e8897 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -13,7 +13,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	model = "Atmel SAMA5D3 family SoC";
@@ -58,6 +58,18 @@
 		reg = <0x20000000 0x8000000>;
 	};
 
+	slow_xtal: slow_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	main_xtal: main_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
 	clocks {
 		adc_op_clk: adc_op_clk{
 			compatible = "fixed-clock";
@@ -113,6 +125,9 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf0008000 0x4000>;
 				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				clocks = <&ssc0_clk>;
@@ -231,6 +246,9 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf800c000 0x4000>;
 				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				clocks = <&ssc1_clk>;
@@ -239,7 +257,9 @@
 			};
 
 			adc0: adc@f8018000 {
-				compatible = "atmel,at91sam9260-adc";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9x5-adc";
 				reg = <0xf8018000 0x100>;
 				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
@@ -261,52 +281,39 @@
 				clocks = <&adc_clk>,
 					 <&adc_op_clk>;
 				clock-names = "adc_clk", "adc_op_clk";
-				atmel,adc-channel-base = <0x50>;
 				atmel,adc-channels-used = <0xfff>;
-				atmel,adc-drdy-mask = <0x1000000>;
-				atmel,adc-num-channels = <12>;
 				atmel,adc-startup-time = <40>;
-				atmel,adc-status-register = <0x30>;
-				atmel,adc-trigger-register = <0xc0>;
-				atmel,adc-use-external;
+				atmel,adc-use-external-triggers;
 				atmel,adc-vref = <3000>;
 				atmel,adc-res = <10 12>;
 				atmel,adc-res-names = "lowres", "highres";
 				status = "disabled";
 
 				trigger@0 {
+					reg = <0>;
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
 				trigger@1 {
+					reg = <1>;
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
 				trigger@2 {
+					reg = <2>;
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
 				trigger@3 {
+					reg = <3>;
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
 			};
 
-			tsadcc: tsadcc@f8018000 {
-				compatible = "atmel,at91sam9x5-tsadcc";
-				reg = <0xf8018000 0x4000>;
-				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,tsadcc_clock = <300000>;
-				atmel,filtering_average = <0x03>;
-				atmel,pendet_debounce = <0x08>;
-				atmel,pendet_sensitivity = <0x02>;
-				atmel,ts_sample_hold_time = <0x0a>;
-				status = "disabled";
-			};
-
 			i2c2: i2c@f801c000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf801c000 0x4000>;
@@ -588,6 +595,84 @@
 					};
 				};
 
+				pwm0 {
+					pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D4 and LCDDAT20 */
+					};
+					pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX0 */
+					};
+					pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D5 and LCDDAT21 */
+					};
+					pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX1 */
+					};
+
+					pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D6 and LCDDAT22 */
+					};
+					pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX0 */
+					};
+					pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with G125CKO and RTS1 */
+					};
+					pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D7 and LCDDAT23 */
+					};
+					pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
+						atmel,pins =
+							<AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX1 */
+					};
+					pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with IRQ */
+					};
+
+					pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXCK */
+					};
+					pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA4 and TIOA0 */
+					};
+					pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXEN */
+					};
+					pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA5 and TIOB0 */
+					};
+
+					pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXDV */
+					};
+					pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
+						atmel,pins =
+							<AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA6 and TCLK0 */
+					};
+					pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXER */
+					};
+					pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
+						atmel,pins =
+							<AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA7 */
+					};
+				};
+
 				spi0 {
 					pinctrl_spi0: spi0-0 {
 						atmel,pins =
@@ -760,18 +845,29 @@
 				#size-cells = <0>;
 				#interrupt-cells = <1>;
 
-				clk32k: slck {
-					compatible = "fixed-clock";
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
 					#clock-cells = <0>;
-					clock-frequency = <32768>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <50000000>;
 				};
 
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
 					#clock-cells = <0>;
 					interrupt-parent = <&pmc>;
 					interrupts = <AT91_PMC_MOSCS>;
-					clocks = <&clk32k>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc &main_osc>;
 				};
 
 				plla: pllack {
@@ -1100,6 +1196,32 @@
 				status = "disabled";
 			};
 
+			sckc@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+					atmel,startup-time-usec = <75>;
+				};
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+					atmel,startup-time-usec = <1200000>;
+				};
+
+				clk32k: slowck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+
 			rtc@fffffeb0 {
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffeb0 0x30>;
@@ -1256,6 +1378,7 @@
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand0_ale_cle>;
 			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
index b029fe7ef17a..1b02208ea6ff 100644
--- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -9,7 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	ahb {
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 382b04431f66..02848453ca0c 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -9,7 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	aliases {
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index a9fa75e41652..7a8d4c6115f7 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -9,7 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	aliases {
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index f55ed072c8e6..b0b1331c1974 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -18,6 +18,14 @@
 		reg = <0x20000000 0x20000000>;
 	};
 
+	slow_xtal {
+		clock-frequency = <32768>;
+	};
+
+	main_xtal {
+		clock-frequency = <12000000>;
+	};
+
 	ahb {
 		apb {
 			spi0: spi@f0004000 {
diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi
index f9bdde542ced..035ab72b3990 100644
--- a/arch/arm/boot/dts/sama5d3xdm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xdm.dtsi
@@ -23,10 +23,8 @@
 			};
 
 			adc0: adc@f8018000 {
-				status = "disabled";
-			};
-
-			tsadcc: tsadcc@f8018000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index dba739b6ef36..306eef0f97ef 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -32,6 +32,10 @@
 				};
 			};
 
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
 			/*
 			 * i2c0 conflicts with ISI:
 			 * disable it to allow the use of ISI
@@ -156,7 +160,7 @@
 	};
 
 	sound {
-		compatible = "atmel,sama5d3ek-wm8904";
+		compatible = "atmel,asoc-wm8904";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
 
@@ -166,9 +170,12 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
+			"MICBIAS", "IN1L",
 			"IN1L", "Mic";
 
 		atmel,ssc-controller = <&ssc0>;
 		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index eb8886b535e4..a99171c8a782 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -14,6 +14,7 @@
 /dts-v1/;
 #include "sh73a0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -112,43 +113,43 @@
 
 		back-key {
 			gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
-			linux,code = <158>;
+			linux,code = <KEY_BACK>;
 			label = "SW3";
 		};
 
 		right-key {
 			gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
-			linux,code = <106>;
+			linux,code = <KEY_RIGHT>;
 			label = "SW2-R";
 		};
 
 		left-key {
 			gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
-			linux,code = <105>;
+			linux,code = <KEY_LEFT>;
 			label = "SW2-L";
 		};
 
 		enter-key {
 			gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
-			linux,code = <28>;
+			linux,code = <KEY_ENTER>;
 			label = "SW2-P";
 		};
 
 		up-key {
 			gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
-			linux,code = <103>;
+			linux,code = <KEY_UP>;
 			label = "SW2-U";
 		};
 
 		down-key {
 			gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
-			linux,code = <108>;
+			linux,code = <KEY_DOWN>;
 			label = "SW2-D";
 		};
 
 		home-key {
 			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
-			linux,code = <102>;
+			linux,code = <KEY_HOME>;
 			label = "SW1";
 		};
 	};
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index b7bd3b9a6753..5ecf552e1c00 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -34,7 +34,6 @@
 	gic: interrupt-controller@f0001000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
-		#address-cells = <1>;
 		interrupt-controller;
 		reg = <0xf0001000 0x1000>,
 		      <0xf0000100 0x100>;
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 537f1a5c07f5..4676f25e87a7 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -15,7 +15,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include <dt-bindings/reset/altr,rst-mgr.h>
 
 / {
 	#address-cells = <1>;
@@ -75,7 +76,14 @@
 			pdma: pdma@ffe01000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0xffe01000 0x1000>;
-				interrupts = <0 180 4>;
+				interrupts = <0 104 4>,
+					     <0 105 4>,
+					     <0 106 4>,
+					     <0 107 4>,
+					     <0 108 4>,
+					     <0 109 4>,
+					     <0 110 4>,
+					     <0 111 4>;
 				#dma-cells = <1>;
 				#dma-channels = <8>;
 				#dma-requests = <32>;
@@ -84,6 +92,22 @@
 			};
 		};
 
+		can0: can@ffc00000 {
+			compatible = "bosch,d_can";
+			reg = <0xffc00000 0x1000>;
+			interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+			clocks = <&can0_clk>;
+			status = "disabled";
+		};
+
+		can1: can@ffc01000 {
+			compatible = "bosch,d_can";
+			reg = <0xffc01000 0x1000>;
+			interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
+			clocks = <&can1_clk>;
+			status = "disabled";
+		};
+
 		clkmgr@ffd04000 {
 				compatible = "altr,clk-mgr";
 				reg = <0xffd04000 0x1000>;
@@ -92,7 +116,12 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					osc: osc1 {
+					osc1: osc1 {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					osc2: osc2 {
 						#clock-cells = <0>;
 						compatible = "fixed-clock";
 					};
@@ -100,7 +129,11 @@
 					f2s_periph_ref_clk: f2s_periph_ref_clk {
 						#clock-cells = <0>;
 						compatible = "fixed-clock";
-						clock-frequency = <10000000>;
+					};
+
+					f2s_sdram_ref_clk: f2s_sdram_ref_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
 					};
 
 					main_pll: main_pll {
@@ -108,14 +141,14 @@
 						#size-cells = <0>;
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-pll-clock";
-						clocks = <&osc>;
+						clocks = <&osc1>;
 						reg = <0x40>;
 
 						mpuclk: mpuclk {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
-							fixed-divider = <2>;
+							div-reg = <0xe0 0 9>;
 							reg = <0x48>;
 						};
 
@@ -123,7 +156,7 @@
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
-							fixed-divider = <4>;
+							div-reg = <0xe4 0 9>;
 							reg = <0x4C>;
 						};
 
@@ -131,7 +164,7 @@
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
-							fixed-divider = <4>;
+							div-reg = <0xe8 0 9>;
 							reg = <0x50>;
 						};
 
@@ -162,7 +195,7 @@
 						#size-cells = <0>;
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-pll-clock";
-						clocks = <&osc>;
+						clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
 						reg = <0x80>;
 
 						emac0_clk: emac0_clk {
@@ -213,7 +246,7 @@
 						#size-cells = <0>;
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-pll-clock";
-						clocks = <&osc>;
+						clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
 						reg = <0xC0>;
 
 						ddr_dqs_clk: ddr_dqs_clk {
@@ -415,6 +448,7 @@
 						compatible = "altr,socfpga-gate-clk";
 						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
 						clk-gate = <0xa0 8>;
+						clk-phase = <0 135>;
 					};
 
 					nand_x_clk: nand_x_clk {
@@ -443,26 +477,132 @@
 
 		gmac0: ethernet@ff700000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x60 0>;
 			reg = <0xff700000 0x2000>;
 			interrupts = <0 115 4>;
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
 			clocks = <&emac0_clk>;
 			clock-names = "stmmaceth";
+			resets = <&rst EMAC0_RESET>;
+			reset-names = "stmmaceth";
 			status = "disabled";
 		};
 
 		gmac1: ethernet@ff702000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x60 2>;
 			reg = <0xff702000 0x2000>;
 			interrupts = <0 120 4>;
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
 			clocks = <&emac1_clk>;
 			clock-names = "stmmaceth";
+			resets = <&rst EMAC1_RESET>;
+			reset-names = "stmmaceth";
+			status = "disabled";
+		};
+
+		i2c0: i2c@ffc04000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc04000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 158 0x4>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc05000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc05000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 159 0x4>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc06000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc06000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 160 0x4>;
 			status = "disabled";
 		};
 
+		i2c3: i2c@ffc07000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc07000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 161 0x4>;
+			status = "disabled";
+		};
+
+		gpio@ff708000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff708000 0x1000>;
+			clocks = <&per_base_clk>;
+			status = "disabled";
+
+			gpio0: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 164 4>;
+			};
+		};
+
+		gpio@ff709000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff709000 0x1000>;
+			clocks = <&per_base_clk>;
+			status = "disabled";
+
+			gpio1: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 165 4>;
+			};
+		};
+
+		gpio@ff70a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff70a000 0x1000>;
+			clocks = <&per_base_clk>;
+			status = "disabled";
+
+			gpio2: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <27>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 166 4>;
+			};
+		};
+
 		L2: l2-cache@fffef000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffef000 0x1000>;
@@ -473,6 +613,17 @@
 			arm,data-latency = <2 1 1>;
 		};
 
+		mmc: dwmmc0@ff704000 {
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff704000 0x1000>;
+			interrupts = <0 139 4>;
+			fifo-depth = <0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+			clock-names = "biu", "ciu";
+		};
+
 		/* Local timer */
 		timer@fffec600 {
 			compatible = "arm,cortex-a9-twd-timer";
@@ -485,24 +636,32 @@
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 167 4>;
 			reg = <0xffc08000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
 		};
 
 		timer1: timer1@ffc09000 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 168 4>;
 			reg = <0xffc09000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
 		};
 
 		timer2: timer2@ffd00000 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 169 4>;
 			reg = <0xffd00000 0x1000>;
+			clocks = <&osc1>;
+			clock-names = "timer";
 		};
 
 		timer3: timer3@ffd01000 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 170 4>;
 			reg = <0xffd01000 0x1000>;
+			clocks = <&osc1>;
+			clock-names = "timer";
 		};
 
 		uart0: serial0@ffc02000 {
@@ -511,6 +670,7 @@
 			interrupts = <0 162 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
 		};
 
 		uart1: serial1@ffc03000 {
@@ -519,16 +679,61 @@
 			interrupts = <0 163 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
 		};
 
-		rstmgr@ffd05000 {
+		rst: rstmgr@ffd05000 {
 			compatible = "altr,rst-mgr";
 			reg = <0xffd05000 0x1000>;
 		};
 
-		sysmgr@ffd08000 {
-				compatible = "altr,sys-mgr";
-				reg = <0xffd08000 0x4000>;
-			};
+		usbphy0: usbphy@0 {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0xffff>;
+			interrupts = <0 125 4>;
+			clocks = <&usb_mp_clk>;
+			clock-names = "otg";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0xffff>;
+			interrupts = <0 128 4>;
+			clocks = <&usb_mp_clk>;
+			clock-names = "otg";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd02000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd02000 0x1000>;
+			interrupts = <0 171 4>;
+			clocks = <&osc1>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd03000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd03000 0x1000>;
+			interrupts = <0 172 4>;
+			clocks = <&osc1>;
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@ffd08000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd08000 0x4000>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
index a85b4043f888..12d1c2ccaf5b 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -15,7 +15,7 @@
  */
 
 /dts-v1/;
-/include/ "socfpga.dtsi"
+#include "socfpga.dtsi"
 
 / {
 	soc {
@@ -27,32 +27,19 @@
 			};
 		};
 
-		serial0@ffc02000 {
-			clock-frequency = <100000000>;
-		};
+		dwmmc0@ff704000 {
+			num-slots = <1>;
+			supports-highspeed;
+			broken-cd;
 
-		serial1@ffc03000 {
-			clock-frequency = <100000000>;
+			slot@0 {
+				reg = <0>;
+				bus-width = <4>;
+			};
 		};
 
 		sysmgr@ffd08000 {
 			cpu1-start-addr = <0xffd080c4>;
 		};
-
-		timer0@ffc08000 {
-			clock-frequency = <100000000>;
-		};
-
-		timer1@ffc09000 {
-			clock-frequency = <100000000>;
-		};
-
-		timer2@ffd00000 {
-			clock-frequency = <25000000>;
-		};
-
-		timer3@ffd01000 {
-			clock-frequency = <25000000>;
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 5beffb2265f4..d532d171e391 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -15,7 +15,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-/include/ "socfpga_arria5.dtsi"
+#include "socfpga_arria5.dtsi"
 
 / {
 	model = "Altera SOCFPGA Arria V SoC Development Kit";
@@ -37,4 +37,44 @@
 		*/
 		ethernet0 = &gmac1;
 	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&usb1 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index a8716f6dbe2e..bf511828729f 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -16,7 +16,7 @@
  */
 
 /dts-v1/;
-/include/ "socfpga.dtsi"
+#include "socfpga.dtsi"
 
 / {
 	soc {
@@ -28,36 +28,23 @@
 			};
 		};
 
+		dwmmc0@ff704000 {
+			num-slots = <1>;
+			supports-highspeed;
+			broken-cd;
+
+			slot@0 {
+				reg = <0>;
+				bus-width = <4>;
+			};
+		};
+
 		ethernet@ff702000 {
 			phy-mode = "rgmii";
 			phy-addr = <0xffffffff>; /* probe for phy addr */
 			status = "okay";
 		};
 
-		timer0@ffc08000 {
-			clock-frequency = <100000000>;
-		};
-
-		timer1@ffc09000 {
-			clock-frequency = <100000000>;
-		};
-
-		timer2@ffd00000 {
-			clock-frequency = <25000000>;
-		};
-
-		timer3@ffd01000 {
-			clock-frequency = <25000000>;
-		};
-
-		serial0@ffc02000 {
-			clock-frequency = <100000000>;
-		};
-
-		serial1@ffc03000 {
-			clock-frequency = <100000000>;
-		};
-
 		sysmgr@ffd08000 {
 			cpu1-start-addr = <0xffd080c4>;
 		};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 2ee52ab8cabb..45de1514af0a 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -15,7 +15,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-/include/ "socfpga_cyclone5.dtsi"
+#include "socfpga_cyclone5.dtsi"
 
 / {
 	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
@@ -38,3 +38,36 @@
 		ethernet0 = &gmac1;
 	};
 };
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 50b99a2c12ae..d26f155f5fd9 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -15,7 +15,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-/include/ "socfpga_cyclone5.dtsi"
+#include "socfpga_cyclone5.dtsi"
 
 / {
 	model = "Terasic SoCkit";
@@ -30,8 +30,29 @@
 		device_type = "memory";
 		reg = <0x0 0x40000000>; /* 1GB */
 	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
 };
 
 &gmac1 {
 	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&usb1 {
+	status = "okay";
 };
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index 5e917a66edd7..a1814b457450 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -1,7 +1,5 @@
 /*
- * arch/arm/mach-at91/include/mach/timex.h
- *
- *  Copyright (C) 2003 SAN People
+ *  Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,24 +12,39 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
+#include "socfpga_cyclone5.dtsi"
 
-#include <mach/hardware.h>
+/ {
+	model = "EBV SOCrates";
+	compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
 
-#ifdef CONFIG_ARCH_AT91X40
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
 
-#define AT91X40_MASTER_CLOCK	40000000
-#define CLOCK_TICK_RATE		(AT91X40_MASTER_CLOCK)
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
 
-#else
+&gmac1 {
+	status = "okay";
+};
 
-#define CLOCK_TICK_RATE		12345678
+&i2c0 {
+	status = "okay";
 
-#endif
+	rtc: rtc@68 {
+		compatible = "stm,m41t82";
+		reg = <0x68>;
+	};
+};
 
-#endif /* __ASM_ARCH_TIMEX_H */
+&mmc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index d1ec0cab2dee..09792b411110 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -16,7 +16,7 @@
  */
 
 /dts-v1/;
-/include/ "socfpga.dtsi"
+#include "socfpga.dtsi"
 
 / {
 	model = "Altera SOCFPGA VT";
@@ -41,6 +41,17 @@
 			};
 		};
 
+		dwmmc0@ff704000 {
+			num-slots = <1>;
+			supports-highspeed;
+			broken-cd;
+
+			slot@0 {
+				reg = <0>;
+				bus-width = <4>;
+			};
+		};
+
 		ethernet@ff700000 {
 			phy-mode = "gmii";
 			status = "okay";
@@ -75,3 +86,8 @@
 		};
 	};
 };
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "gmii";
+};
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 3075d2d3a8be..0aa6fef5ce22 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr320 Evaluation Baord
  *
- * Copyright 2012 Shiraz Hashim <shiraz.hashim@st.com>
+ * Copyright 2012 Shiraz Hashim <shiraz.linux.kernel@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts
index 7f3baf51a3a9..32dd55e5f4e6 100644
--- a/arch/arm/boot/dts/ste-ccu8540.dts
+++ b/arch/arm/boot/dts/ste-ccu8540.dts
@@ -18,6 +18,7 @@
 	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
 	};
 
diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
index 229508750890..651c56d400a4 100644
--- a/arch/arm/boot/dts/ste-ccu9540.dts
+++ b/arch/arm/boot/dts/ste-ccu9540.dts
@@ -38,8 +38,8 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
-			mmc-cap-sd-highspeed;
-			mmc-cap-mmc-highspeed;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 
 			cd-gpios  = <&gpio7 6 0x4>; // 230
@@ -63,7 +63,7 @@
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <100000000>;
 			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 
 			status = "okay";
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index e0853ea02df2..e41eedca3ce3 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -705,7 +705,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
-			clock-names = "ssp0clk", "apb_pclk";
+			clock-names = "SSPCLK", "apb_pclk";
 			dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
 			       <&dma 8 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
@@ -718,7 +718,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
-			clock-names = "ssp1clk", "apb_pclk";
+			clock-names = "SSPCLK", "apb_pclk";
 			dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
 			       <&dma 9 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
@@ -732,7 +732,7 @@
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
 			clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
-			clock-names = "spi0clk", "apb_pclk";
+			clock-names = "SSPCLK", "apb_pclk";
 			dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
 			       <&dma 0 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
@@ -746,7 +746,7 @@
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
 			clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
-			clock-names = "spi1clk", "apb_pclk";
+			clock-names = "SSPCLK", "apb_pclk";
 			dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
 			       <&dma 35 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
@@ -760,7 +760,7 @@
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
 			clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
-			clock-names = "spi2clk", "apb_pclk";
+			clock-names = "SSPCLK", "apb_pclk";
 			dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
 			       <&dma 33 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
@@ -774,7 +774,7 @@
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
 			clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
-			clock-names = "spi3clk", "apb_pclk";
+			clock-names = "SSPCLK", "apb_pclk";
 			dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
 			       <&dma 40 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
new file mode 100644
index 000000000000..30f8601da323
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -0,0 +1,428 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	soc {
+		prcmu@80157000 {
+			ab8500 {
+				ab8500-gpio {
+					/* Hog a few default settings */
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio2_default_mode>,
+						    <&gpio4_default_mode>,
+						    <&gpio10_default_mode>,
+						    <&gpio11_default_mode>,
+						    <&gpio12_default_mode>,
+						    <&gpio13_default_mode>,
+						    <&gpio16_default_mode>,
+						    <&gpio24_default_mode>,
+						    <&gpio25_default_mode>,
+						    <&gpio36_default_mode>,
+						    <&gpio37_default_mode>,
+						    <&gpio38_default_mode>,
+						    <&gpio39_default_mode>,
+						    <&gpio42_default_mode>,
+						    <&gpio26_default_mode>,
+						    <&gpio35_default_mode>,
+						    <&ycbcr_default_mode>,
+						    <&pwm_default_mode>,
+						    <&adi1_default_mode>,
+						    <&usbuicc_default_mode>,
+						    <&dmic_default_mode>,
+						    <&extcpena_default_mode>,
+						    <&modsclsda_default_mode>;
+
+					/*
+					 * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
+					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
+					 */
+					gpio2 {
+						gpio2_default_mode: gpio2_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio2_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO2_T9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio4 {
+						gpio4_default_mode: gpio4_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio4_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO4_W2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio10 {
+						gpio10_default_mode: gpio10_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio10_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO10_U17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio11 {
+						gpio11_default_mode: gpio11_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio11_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO11_AA18";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio12 {
+						gpio12_default_mode: gpio12_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio12_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO12_U16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio13 {
+						gpio13_default_mode: gpio13_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio13_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO13_W17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio16 {
+						gpio16_default_mode: gpio16_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio16_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO16_F15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio24 {
+						gpio24_default_mode: gpio24_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio24_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO24_T14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio25 {
+						gpio25_default_mode: gpio25_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio25_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO25_R16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio36 {
+						gpio36_default_mode: gpio36_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio36_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO36_A17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio37 {
+						gpio37_default_mode: gpio37_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio37_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO37_E15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio38 {
+						gpio38_default_mode: gpio38_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio38_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO38_C17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio39 {
+						gpio39_default_mode: gpio39_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio39_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO39_E16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio42 {
+						gpio42_default_mode: gpio42_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio42_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO42_U2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
+					 */
+					gpio26 {
+						gpio26_default_mode: gpio26_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio26_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO26_M16";
+								output-low;
+							};
+						};
+					};
+					gpio35 {
+						gpio35_default_mode: gpio35_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio35_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO35_W15";
+								output-low;
+							};
+						};
+					};
+					/*
+					 * This sets up the YCBCR connector pins, i.e. analog video out.
+					 * Set as input with no bias.
+					 */
+					ycbcr {
+						ycbcr_default_mode: ycbcr_default {
+							default_mux {
+								ste,function = "ycbcr";
+								ste,pins = "ycbcr0123_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO6_Y18",
+									 "GPIO7_AA20",
+									 "GPIO8_W18",
+									 "GPIO9_AA19";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					/* This sets up the PWM pins 14 and 15 */
+					pwm {
+						pwm_default_mode: pwm_default {
+							default_mux {
+								ste,function = "pwmout";
+								ste,pins = "pwmout1_d_1", "pwmout2_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO14_F14",
+									 "GPIO15_B17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up audio interface 1 */
+					adi1 {
+						adi1_default_mode: adi1_default {
+							default_mux {
+								ste,function = "adi1";
+								ste,pins = "adi1_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO17_P5",
+									 "GPIO18_R5",
+									 "GPIO19_U5",
+									 "GPIO20_T5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the USB UICC pins */
+					usbuicc {
+						usbuicc_default_mode: usbuicc_default {
+							default_mux {
+								ste,function = "usbuicc";
+								ste,pins = "usbuicc_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO21_H19",
+									 "GPIO22_G20",
+									 "GPIO23_G19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the microphone pins */
+					dmic {
+						dmic_default_mode: dmic_default {
+							default_mux {
+								ste,function = "dmic";
+								ste,pins = "dmic12_d_1",
+									 "dmic34_d_1",
+									 "dmic56_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO27_J6",
+									 "GPIO28_K6",
+									 "GPIO29_G6",
+									 "GPIO30_H6",
+									 "GPIO31_F5",
+									 "GPIO32_G5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					extcpena {
+						extcpena_default_mode: extcpena_default {
+							default_mux {
+								ste,function = "extcpena";
+								ste,pins = "extcpena_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO34_R17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* Modem I2C setup (SCL and SDA pins) */
+					modsclsda {
+						modsclsda_default_mode: modsclsda_default {
+							default_mux {
+								ste,function = "modsclsda";
+								ste,pins = "modsclsda_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO40_T19",
+									"GPIO41_U19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Clock output pins associated with regulators.
+					 */
+					sysclkreq2 {
+						sysclkreq2_default_mode: sysclkreq2_default {
+							default_mux {
+								ste,function = "sysclkreq";
+								ste,pins = "sysclkreq2_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO1_T10";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq2_sleep_mode: sysclkreq2_sleep {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio1_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO1_T10";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					sysclkreq4 {
+						sysclkreq4_default_mode: sysclkreq4_default {
+							default_mux {
+								ste,function = "sysclkreq";
+								ste,pins = "sysclkreq4_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO3_U9";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq4_sleep_mode: sysclkreq4_sleep {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio3_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO3_U9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href-ab8505.dtsi b/arch/arm/boot/dts/ste-href-ab8505.dtsi
new file mode 100644
index 000000000000..6006d62086a2
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-ab8505.dtsi
@@ -0,0 +1,240 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				ab8505-gpio {
+					/* Hog a few default settings */
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio2_default_mode>,
+						    <&gpio10_default_mode>,
+						    <&gpio11_default_mode>,
+						    <&gpio13_default_mode>,
+						    <&gpio34_default_mode>,
+						    <&gpio50_default_mode>,
+						    <&pwm_default_mode>,
+						    <&adi2_default_mode>,
+						    <&modsclsda_default_mode>,
+						    <&resethw_default_mode>,
+						    <&service_default_mode>;
+
+					/*
+					 * Pins 2, 10, 11, 13, 34 and 50
+					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
+					 */
+					gpio2 {
+						gpio2_default_mode: gpio2_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio2_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO2_R5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio10 {
+						gpio10_default_mode: gpio10_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio10_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO10_B16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio11 {
+						gpio11_default_mode: gpio11_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio11_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO11_B17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio13 {
+						gpio13_default_mode: gpio13_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio13_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO13_D17";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					gpio34 {
+						gpio34_default_mode: gpio34_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio34_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO34_H14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio50 {
+						gpio50_default_mode: gpio50_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio50_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO50_L4";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					/* This sets up the PWM pin 14 */
+					pwm {
+						pwm_default_mode: pwm_default {
+							default_mux {
+								ste,function = "pwmout";
+								ste,pins = "pwmout1_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO14_C16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up audio interface 2 */
+					adi2 {
+						adi2_default_mode: adi2_default {
+							default_mux {
+								ste,function = "adi2";
+								ste,pins = "adi2_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO17_P2",
+									 "GPIO18_N3",
+									 "GPIO19_T1",
+									 "GPIO20_P3";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* Modem I2C setup (SCL and SDA pins) */
+					modsclsda {
+						modsclsda_default_mode: modsclsda_default {
+							default_mux {
+								ste,function = "modsclsda";
+								ste,pins = "modsclsda_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO40_J15",
+									"GPIO41_J14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					resethw {
+						resethw_default_mode: resethw_default {
+							default_mux {
+								ste,function = "resethw";
+								ste,pins = "resethw_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO52_D16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					service {
+						service_default_mode: service_default {
+							default_mux {
+								ste,function = "service";
+								ste,pins = "service_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO53_D15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Clock output pins associated with regulators.
+					 */
+					sysclkreq2 {
+						sysclkreq2_default_mode: sysclkreq2_default {
+							default_mux {
+								ste,function = "sysclkreq";
+								ste,pins = "sysclkreq2_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO1_N4";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq2_sleep_mode: sysclkreq2_sleep {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio1_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO1_N4";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					sysclkreq4 {
+						sysclkreq4_default_mode: sysclkreq4_default {
+							default_mux {
+								ste,function = "sysclkreq";
+								ste,pins = "sysclkreq4_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO3_P5";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq4_sleep_mode: sysclkreq4_sleep {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio3_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO3_P5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 6cb9b68e2188..bf8f0eddc2c0 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -116,8 +116,15 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
-			mmc-cap-sd-highspeed;
-			mmc-cap-mmc-highspeed;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			full-pwr-cycle;
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-cmd;
+			st,sig-pin-fbclk;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
@@ -132,6 +139,7 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
+			non-removable;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi1_default_mode>;
 			pinctrl-1 = <&sdi1_sleep_mode>;
@@ -144,7 +152,9 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
+			non-removable;
+			vmmc-supply = <&db8500_vsmps2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi2_default_mode>;
 			pinctrl-1 = <&sdi2_sleep_mode>;
@@ -157,7 +167,8 @@
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <100000000>;
 			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
+			non-removable;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi4_default_mode>;
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 40f0ecdf9303..abc762e24fcb 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -12,6 +12,7 @@
  */
 
 #include "ste-dbx5x0.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-href.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 3b6d1181939b..c2341061b943 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include "ste-dbx5x0.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-href.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 5acc0449676a..d316c955bd5f 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -840,8 +840,8 @@
 			interrupts = <22>;
 			max-frequency = <48000000>;
 			bus-width = <4>;
-			mmc-cap-mmc-highspeed;
-			mmc-cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
 			cd-gpios = <&gpio3 15 0x1>;
 			cd-inverted;
 			pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 97d5d21b7db7..474ef83229cd 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "ste-dbx5x0.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-href-family-pinctrl.dtsi"
 
 / {
@@ -155,7 +156,7 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
@@ -194,7 +195,7 @@
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <100000000>;
 			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
+			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi4_default_mode>;
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index a9da4800daf0..82a661677e97 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -442,8 +442,8 @@
 			clock-names = "apb_pclk", "mclk";
 			max-frequency = <24000000>;
 			bus-width = <4>; // SD-card slot
-			mmc-cap-mmc-highspeed;
-			mmc-cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
 			cd-gpios = <&gpio 12 0x4>;
 			cd-inverted;
 			vmmc-supply = <&ab3100_ldo_g_reg>;
@@ -457,7 +457,7 @@
 			interrupt-parent = <&vica>;
 			interrupts = <23>;
 			clocks = <&spi_clk>, <&spi_clk>;
-			clock-names = "apb_pclk", "spi_clk";
+			clock-names = "SSPCLK", "apb_pclk";
 			dmas = <&dmac 27 &dmac 28>;
 			dma-names = "tx", "rx";
 			num-cs = <3>;
diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
new file mode 100644
index 000000000000..fe69f92e5f82
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-b2120.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih407.dtsi"
+/ {
+	model = "STiH407 B2120";
+	compatible = "st,stih407-b2120", "st,stih407";
+
+	chosen {
+		bootargs = "console=ttyAS0,115200";
+		linux,stdout-path = &sbc_serial0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	aliases {
+		ttyAS0 = &sbc_serial0;
+	};
+
+	soc {
+		sbc_serial0: serial@9530000 {
+			status = "okay";
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			red {
+				#gpio-cells = <2>;
+				label = "Front Panel LED";
+				gpios = <&pio4 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			green {
+				#gpio-cells = <2>;
+				gpios = <&pio1 3 0>;
+				default-state = "off";
+			};
+		};
+
+		i2c@9842000 {
+			status = "okay";
+		};
+
+		i2c@9843000 {
+			status = "okay";
+		};
+
+		i2c@9844000 {
+			status = "okay";
+		};
+
+		i2c@9845000 {
+			status = "okay";
+		};
+
+		i2c@9540000 {
+			status = "okay";
+		};
+
+		/* SSC11 to HDMI */
+		i2c@9541000 {
+			status = "okay";
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
new file mode 100644
index 000000000000..800f46f009f3
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+	clocks {
+		/*
+		 * Fixed 30MHz oscillator inputs to SoC
+		 */
+		clk_sysin: clk-sysin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <30000000>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: arm-periph-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <600000000>;
+		};
+
+		/*
+		 * Bootloader initialized system infrastructure clock for
+		 * serial devices.
+		 */
+		clk_ext2f_a9: clockgen-c0@13 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			clock-output-names = "clk-s-icn-reg-0";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
new file mode 100644
index 000000000000..402844cb3152
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -0,0 +1,615 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+	aliases {
+		/* 0-5: PIO_SBC */
+		gpio0 = &pio0;
+		gpio1 = &pio1;
+		gpio2 = &pio2;
+		gpio3 = &pio3;
+		gpio4 = &pio4;
+		gpio5 = &pio5;
+		/* 10-19: PIO_FRONT0 */
+		gpio6 = &pio10;
+		gpio7 = &pio11;
+		gpio8 = &pio12;
+		gpio9 = &pio13;
+		gpio10 = &pio14;
+		gpio11 = &pio15;
+		gpio12 = &pio16;
+		gpio13 = &pio17;
+		gpio14 = &pio18;
+		gpio15 = &pio19;
+		/* 20: PIO_FRONT1 */
+		gpio16 = &pio20;
+		/* 30-35: PIO_REAR */
+		gpio17 = &pio30;
+		gpio18 = &pio31;
+		gpio19 = &pio32;
+		gpio20 = &pio33;
+		gpio21 = &pio34;
+		gpio22 = &pio35;
+		/* 40-42: PIO_FLASH */
+		gpio23 = &pio40;
+		gpio24 = &pio41;
+		gpio25 = &pio42;
+	};
+
+	soc {
+		pin-controller-sbc {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-sbc-pinctrl";
+			st,syscfg = <&syscfg_sbc>;
+			reg = <0x0961f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09610000 0x6000>;
+
+			pio0: gpio@09610000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO0";
+			};
+			pio1: gpio@09611000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO1";
+			};
+			pio2: gpio@09612000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO2";
+			};
+			pio3: gpio@09613000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO3";
+			};
+			pio4: gpio@09614000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO4";
+			};
+
+			pio5: gpio@09615000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO5";
+			};
+
+			rc {
+				pinctrl_ir: ir0 {
+					st,pins {
+						ir = <&pio4 0 ALT2 IN>;
+					};
+				};
+			};
+
+			/* SBC_ASC0 - UART10 */
+			sbc_serial0 {
+				pinctrl_sbc_serial0: sbc_serial0-0 {
+					st,pins {
+						tx = <&pio3 4 ALT1 OUT>;
+						rx = <&pio3 5 ALT1 IN>;
+					};
+				};
+			};
+			/* SBC_ASC1 - UART11 */
+			sbc_serial1 {
+				pinctrl_sbc_serial1: sbc_serial1-0 {
+					st,pins {
+						tx = <&pio2 6 ALT3 OUT>;
+						rx = <&pio2 7 ALT3 IN>;
+					};
+				};
+			};
+
+			i2c10 {
+				pinctrl_i2c10_default: i2c10-default {
+					st,pins {
+						sda = <&pio4 6 ALT1 BIDIR>;
+						scl = <&pio4 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c11 {
+				pinctrl_i2c11_default: i2c11-default {
+					st,pins {
+						sda = <&pio5 1 ALT1 BIDIR>;
+						scl = <&pio5 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&pio4 0 ALT6 IN>;
+						keyin1 = <&pio4 5 ALT4 IN>;
+						keyin2 = <&pio0 4 ALT2 IN>;
+						keyin3 = <&pio2 6 ALT2 IN>;
+
+						keyout0 = <&pio4 6 ALT4 OUT>;
+						keyout1 = <&pio1 7 ALT2 OUT>;
+						keyout2 = <&pio0 6 ALT2 OUT>;
+						keyout3 = <&pio2 7 ALT2 OUT>;
+					};
+				};
+			};
+
+			gmac1 {
+				/*
+				 * Almost all the boards based on STiH407 SoC have an embedded
+				 * switch where the mdio/mdc have been used for managing the SMI
+				 * iface via I2C. For this reason these lines can be allocated
+				 * by using dedicated configuration (in case of there will be a
+				 * standard PHY transceiver on-board).
+				 */
+				pinctrl_rgmii1: rgmii1-0 {
+					st,pins {
+
+						txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
+						rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>;
+						clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>;
+					};
+				};
+
+				pinctrl_rgmii1_mdio: rgmii1-mdio {
+					st,pins {
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+					};
+				};
+
+				pinctrl_mii1: mii1 {
+					st,pins {
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						col = <&pio0 7 ALT1 IN BYPASS 1000>;
+
+						mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+			};
+
+			pwm1 {
+				pinctrl_pwm1_chan0_default: pwm1-0-default {
+					st,pins {
+						pwm-out = <&pio3 0 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan1_default: pwm1-1-default {
+					st,pins {
+						pwm-out = <&pio4 4 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan2_default: pwm1-2-default {
+					st,pins {
+						pwm-out = <&pio4 6 ALT3 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan3_default: pwm1-3-default {
+					st,pins {
+						pwm-out = <&pio4 7 ALT3 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0920f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09200000 0x10000>;
+
+			pio10: pio@09200000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO10";
+			};
+			pio11: pio@09201000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO11";
+			};
+			pio12: pio@09202000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO12";
+			};
+			pio13: pio@09203000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO13";
+			};
+			pio14: pio@09204000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO14";
+			};
+			pio15: pio@09205000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO15";
+			};
+			pio16: pio@09206000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x100>;
+				st,bank-name = "PIO16";
+			};
+			pio17: pio@09207000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x100>;
+				st,bank-name = "PIO17";
+			};
+			pio18: pio@09208000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x100>;
+				st,bank-name = "PIO18";
+			};
+			pio19: pio@09209000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x100>;
+				st,bank-name = "PIO19";
+			};
+
+			/* Comms */
+			serial0 {
+				pinctrl_serial0: serial0-0 {
+					st,pins {
+						tx = <&pio17 0 ALT1 OUT>;
+						rx = <&pio17 1 ALT1 IN>;
+					};
+				};
+			};
+
+			serial1 {
+				pinctrl_serial1: serial1-0 {
+					st,pins {
+						tx = <&pio16 0 ALT1 OUT>;
+						rx = <&pio16 1 ALT1 IN>;
+					};
+				};
+			};
+
+			serial2 {
+				pinctrl_serial2: serial2-0 {
+					st,pins {
+						tx = <&pio15 0 ALT1 OUT>;
+						rx = <&pio15 1 ALT1 IN>;
+					};
+				};
+			};
+
+			mmc1 {
+				pinctrl_sd1: sd1-0 {
+					st,pins {
+						sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
+						sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
+						sd_led = <&pio16 6 ALT6 OUT>;
+						sd_pwren = <&pio16 7 ALT6 OUT>;
+						sd_cd = <&pio19 0 ALT6 IN>;
+						sd_wp = <&pio19 1 ALT6 IN>;
+					};
+				};
+			};
+
+
+			i2c0 {
+				pinctrl_i2c0_default: i2c0-default {
+					st,pins {
+						sda = <&pio10 6 ALT2 BIDIR>;
+						scl = <&pio10 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c1 {
+				pinctrl_i2c1_default: i2c1-default {
+					st,pins {
+						sda = <&pio11 1 ALT2 BIDIR>;
+						scl = <&pio11 0 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c2 {
+				pinctrl_i2c2_default: i2c2-default {
+					st,pins {
+						sda = <&pio15 6 ALT2 BIDIR>;
+						scl = <&pio15 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c3 {
+				pinctrl_i2c3_default: i2c3-default {
+					st,pins {
+						sda = <&pio18 6 ALT1 BIDIR>;
+						scl = <&pio18 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			spi0 {
+				pinctrl_spi0_default: spi0-default {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 BIDIR>;
+						mrst = <&pio12 7 ALT2 BIDIR>;
+						scl = <&pio12 5 ALT2 BIDIR>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front1 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0921f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09210000 0x10000>;
+
+			pio20: pio@09210000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO20";
+			};
+		};
+
+		pin-controller-rear {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-rear-pinctrl";
+			st,syscfg = <&syscfg_rear>;
+			reg = <0x0922f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09220000 0x6000>;
+
+			pio30: gpio@09220000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO30";
+			};
+			pio31: gpio@09221000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO31";
+			};
+			pio32: gpio@09222000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO32";
+			};
+			pio33: gpio@09223000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO33";
+			};
+			pio34: gpio@09224000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO34";
+			};
+			pio35: gpio@09225000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO35";
+			};
+
+			i2c4 {
+				pinctrl_i2c4_default: i2c4-default {
+					st,pins {
+						sda = <&pio30 1 ALT1 BIDIR>;
+						scl = <&pio30 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c5 {
+				pinctrl_i2c5_default: i2c5-default {
+					st,pins {
+						sda = <&pio34 4 ALT1 BIDIR>;
+						scl = <&pio34 3 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			usb3 {
+				pinctrl_usb3: usb3-2 {
+					st,pins {
+						usb-oc-detect = <&pio35 4 ALT1 IN>;
+						usb-pwr-enable = <&pio35 5 ALT1 OUT>;
+						usb-vbus-valid = <&pio35 6 ALT1 IN>;
+					};
+				};
+			};
+
+			pwm0 {
+				pinctrl_pwm0_chan0_default: pwm0-0-default {
+					st,pins {
+						pwm-out = <&pio31 1 ALT1 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-flash {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-flash-pinctrl";
+			st,syscfg = <&syscfg_flash>;
+			reg = <0x0923f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09230000 0x3000>;
+
+			pio40: gpio@09230000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x100>;
+				st,bank-name = "PIO40";
+			};
+			pio41: gpio@09231000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO41";
+			};
+			pio42: gpio@09232000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO42";
+			};
+
+			mmc0 {
+				pinctrl_mmc0: mmc0-0 {
+					st,pins {
+						emmc_clk = <&pio40 6 ALT1 BIDIR>;
+						emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+						emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
+						emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
+						emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
+						emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
+						emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
+						emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
+						emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
+						emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
new file mode 100644
index 000000000000..4f9024f19866
--- /dev/null
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -0,0 +1,263 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih407-clock.dtsi"
+#include "stih407-pinctrl.dtsi"
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	intc: interrupt-controller@08761000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x08761000 0x1000>, <0x08760100 0x100>;
+	};
+
+	scu@08760000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x08760000 0x1000>;
+	};
+
+	timer@08760200 {
+		interrupt-parent = <&intc>;
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x08760200 0x100>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&arm_periph_clk>;
+	};
+
+	l2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0x08762000 0x1000>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible = "simple-bus";
+
+		syscfg_sbc: sbc-syscfg@9620000 {
+			compatible = "st,stih407-sbc-syscfg", "syscon";
+			reg = <0x9620000 0x1000>;
+		};
+
+		syscfg_front: front-syscfg@9280000 {
+			compatible = "st,stih407-front-syscfg", "syscon";
+			reg = <0x9280000 0x1000>;
+		};
+
+		syscfg_rear: rear-syscfg@9290000 {
+			compatible = "st,stih407-rear-syscfg", "syscon";
+			reg = <0x9290000 0x1000>;
+		};
+
+		syscfg_flash: flash-syscfg@92a0000 {
+			compatible = "st,stih407-flash-syscfg", "syscon";
+			reg = <0x92a0000 0x1000>;
+		};
+
+		syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
+			compatible = "st,stih407-sbc-reg-syscfg", "syscon";
+			reg = <0x9600000 0x1000>;
+		};
+
+		syscfg_core: core-syscfg@92b0000 {
+			compatible = "st,stih407-core-syscfg", "syscon";
+			reg = <0x92b0000 0x1000>;
+		};
+
+		syscfg_lpm: lpm-syscfg@94b5100 {
+			compatible = "st,stih407-lpm-syscfg", "syscon";
+			reg = <0x94b5100 0x1000>;
+		};
+
+		serial@9830000 {
+			compatible = "st,asc";
+			reg = <0x9830000 0x2c>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial0>;
+			clocks = <&clk_ext2f_a9>;
+
+			status = "disabled";
+		};
+
+		serial@9831000 {
+			compatible = "st,asc";
+			reg = <0x9831000 0x2c>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial1>;
+			clocks = <&clk_ext2f_a9>;
+
+			status = "disabled";
+		};
+
+		serial@9832000 {
+			compatible = "st,asc";
+			reg = <0x9832000 0x2c>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial2>;
+			clocks = <&clk_ext2f_a9>;
+
+			status = "disabled";
+		};
+
+		/* SBC_ASC0 - UART10 */
+		sbc_serial0: serial@9530000 {
+			compatible = "st,asc";
+			reg = <0x9530000 0x2c>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial0>;
+			clocks = <&clk_sysin>;
+
+			status = "disabled";
+		};
+
+		serial@9531000 {
+			compatible = "st,asc";
+			reg = <0x9531000 0x2c>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial1>;
+			clocks = <&clk_sysin>;
+
+			status = "disabled";
+		};
+
+		i2c@9840000 {
+			compatible = "st,comms-ssc4-i2c";
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x9840000 0x110>;
+			clocks = <&clk_ext2f_a9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9841000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9841000 0x110>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_ext2f_a9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9842000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9842000 0x110>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_ext2f_a9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9843000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9843000 0x110>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_ext2f_a9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9844000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9844000 0x110>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_ext2f_a9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9845000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9845000 0x110>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_ext2f_a9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c5_default>;
+
+			status = "disabled";
+		};
+
+
+		/* SSCs on SBC */
+		i2c@9540000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9540000 0x110>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c10_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9541000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9541000 0x110>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c11_default>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih415-b2000.dts b/arch/arm/boot/dts/stih415-b2000.dts
index d4af53160435..bdfbd3765db2 100644
--- a/arch/arm/boot/dts/stih415-b2000.dts
+++ b/arch/arm/boot/dts/stih415-b2000.dts
@@ -11,5 +11,5 @@
 #include "stih41x-b2000.dtsi"
 / {
 	model = "STiH415 B2000 Board";
-	compatible = "st,stih415", "st,stih415-b2000";
+	compatible = "st,stih415-b2000", "st,stih415";
 };
diff --git a/arch/arm/boot/dts/stih415-b2020.dts b/arch/arm/boot/dts/stih415-b2020.dts
index 442b019e9a3a..71903a87bd31 100644
--- a/arch/arm/boot/dts/stih415-b2020.dts
+++ b/arch/arm/boot/dts/stih415-b2020.dts
@@ -11,5 +11,5 @@
 #include "stih41x-b2020.dtsi"
 / {
 	model = "STiH415 B2020 Board";
-	compatible = "st,stih415", "st,stih415-b2020";
+	compatible = "st,stih415-b2020", "st,stih415";
 };
diff --git a/arch/arm/boot/dts/stih415-clock.dtsi b/arch/arm/boot/dts/stih415-clock.dtsi
index 174c799df741..3ee34514bc4b 100644
--- a/arch/arm/boot/dts/stih415-clock.dtsi
+++ b/arch/arm/boot/dts/stih415-clock.dtsi
@@ -5,34 +5,529 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+#include <dt-bindings/clock/stih415-clks.h>
+
 / {
 	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
 		/*
 		 * Fixed 30MHz oscillator input to SoC
 		 */
-		CLK_SYSIN: CLK_SYSIN {
+		clk_sysin: clk-sysin {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <30000000>;
 		};
 
 		/*
-		 * ARM Peripheral clock for timers
+		 * ClockGenAs on SASG1
 		 */
-		arm_periph_clk: arm_periph_clk {
+		clockgen-a@fee62000 {
+			reg = <0xfee62000 0xb48>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-plls-c65";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll0-hs",
+						     "clk-s-a0-pll0-ls",
+						     "clk-s-a0-pll1";
+			};
+
+			clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c65",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-osc-prediv";
+			};
+
+			clk_s_a0_hs: clk-s-a0-hs {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-hs",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a0_osc_prediv>,
+					 <&clk_s_a0_pll 0>, /* PLL0 HS */
+					 <&clk_s_a0_pll 2>; /* PLL1 */
+
+				clock-output-names = "clk-s-fdma-0",
+						     "clk-s-fdma-1",
+						     ""; /* clk-s-jit-sense */
+						     /* Fourth output unused */
+			};
+
+			clk_s_a0_ls: clk-s-a0-ls {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-ls",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a0_osc_prediv>,
+					 <&clk_s_a0_pll 1>, /* PLL0 LS */
+					 <&clk_s_a0_pll 2>; /* PLL1 */
+
+				clock-output-names = "clk-s-icn-reg-0",
+						     "clk-s-icn-if-0",
+						     "clk-s-icn-reg-lp-0",
+						     "clk-s-emiss",
+						     "clk-s-eth1-phy",
+						     "clk-s-mii-ref-out";
+						 /* Remaining outputs unused */
+			};
+		};
+
+		clockgen-a@fee81000 {
+			reg = <0xfee81000 0xb48>;
+
+			clk_s_a1_pll: clk-s-a1-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-plls-c65";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a1-pll0-hs",
+						     "clk-s-a1-pll0-ls",
+						     "clk-s-a1-pll1";
+			};
+
+			clk_s_a1_osc_prediv: clk-s-a1-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c65",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a1-osc-prediv";
+			};
+
+			clk_s_a1_hs: clk-s-a1-hs {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-hs",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a1_osc_prediv>,
+					 <&clk_s_a1_pll 0>, /* PLL0 HS */
+					 <&clk_s_a1_pll 2>; /* PLL1 */
+
+				clock-output-names = "", /* Reserved */
+						     "", /* Reserved */
+						     "clk-s-stac-phy",
+						     "clk-s-vtac-tx-phy";
+			};
+
+			clk_s_a1_ls: clk-s-a1-ls {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-ls",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a1_osc_prediv>,
+					 <&clk_s_a1_pll 1>, /* PLL0 LS */
+					 <&clk_s_a1_pll 2>; /* PLL1 */
+
+				clock-output-names = "clk-s-icn-if-2",
+						     "clk-s-card-mmc",
+						     "clk-s-icn-if-1",
+						     "clk-s-gmac0-phy",
+						     "clk-s-nand-ctrl",
+						     "", /* Reserved */
+						     "clk-s-mii0-ref-out",
+						     ""; /* clk-s-stac-sys */
+						 /* Remaining outputs unused */
+			};
+		};
+
+		/*
+		 * ClockGenAs on MPE41
+		 */
+		clockgen-a@fde12000 {
+			reg = <0xfde12000 0xb50>;
+
+			clk_m_a0_pll0: clk-m-a0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a0-pll0-phi0",
+						     "clk-m-a0-pll0-phi1",
+						     "clk-m-a0-pll0-phi2",
+						     "clk-m-a0-pll0-phi3";
+			};
+
+			clk_m_a0_pll1: clk-m-a0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a0-pll1-phi0",
+						     "clk-m-a0-pll1-phi1",
+						     "clk-m-a0-pll1-phi2",
+						     "clk-m-a0-pll1-phi3";
+			};
+
+			clk_m_a0_osc_prediv: clk-m-a0-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c32",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a0-osc-prediv";
+			};
+
+			clk_m_a0_div0: clk-m-a0-div0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf0",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */
+					 <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */
+
+				clock-output-names = "clk-m-apb-pm", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "clk-m-pp-dmu-0",
+						     "clk-m-pp-dmu-1",
+						     "clk-m-icm-disp",
+						     ""; /* Unused */
+			};
+
+			clk_m_a0_div1: clk-m-a0-div1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf1",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */
+					 <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */
+
+				clock-output-names = "", /* Unused */
+						     "", /* Unused */
+						     "clk-m-a9-ext2f",
+						     "clk-m-st40rt",
+						     "clk-m-st231-dmu-0",
+						     "clk-m-st231-dmu-1",
+						     "clk-m-st231-aud",
+						     "clk-m-st231-gp-0";
+			};
+
+			clk_m_a0_div2: clk-m-a0-div2 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf2",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */
+					 <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */
+
+				clock-output-names = "clk-m-st231-gp-1",
+						     "clk-m-icn-cpu",
+						     "clk-m-icn-stac",
+						     "clk-m-icn-dmu-0",
+						     "clk-m-icn-dmu-1",
+						     "", /* Unused */
+						     "", /* Unused */
+						     ""; /* Unused */
+			};
+
+			clk_m_a0_div3: clk-m-a0-div3 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf3",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */
+					 <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */
+
+				clock-output-names = "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "clk-m-icn-eram",
+						     "clk-m-a9-trace";
+			};
+		};
+
+		clockgen-a@fd6db000 {
+			reg = <0xfd6db000 0xb50>;
+
+			clk_m_a1_pll0: clk-m-a1-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a1-pll0-phi0",
+						     "clk-m-a1-pll0-phi1",
+						     "clk-m-a1-pll0-phi2",
+						     "clk-m-a1-pll0-phi3";
+			};
+
+			clk_m_a1_pll1: clk-m-a1-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a1-pll1-phi0",
+						     "clk-m-a1-pll1-phi1",
+						     "clk-m-a1-pll1-phi2",
+						     "clk-m-a1-pll1-phi3";
+			};
+
+			clk_m_a1_osc_prediv: clk-m-a1-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c32",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a1-osc-prediv";
+			};
+
+			clk_m_a1_div0: clk-m-a1-div0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf0",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */
+					 <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */
+
+				clock-output-names = "clk-m-fdma-12",
+						     "clk-m-fdma-10",
+						     "clk-m-fdma-11",
+						     "clk-m-hva-lmi",
+						     "clk-m-proc-sc",
+						     "clk-m-tp",
+						     "clk-m-icn-gpu",
+						     "clk-m-icn-vdp-0";
+			};
+
+			clk_m_a1_div1: clk-m-a1-div1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf1",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
+					 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
+
+				clock-output-names = "clk-m-icn-vdp-1",
+						     "clk-m-icn-vdp-2",
+						     "clk-m-icn-vdp-3",
+						     "clk-m-prv-t1-bus",
+						     "clk-m-icn-vdp-4",
+						     "clk-m-icn-reg-10",
+						     "", /* Unused */
+						     ""; /* clk-m-icn-st231 */
+			};
+
+			clk_m_a1_div2: clk-m-a1-div2 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf2",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */
+					 <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */
+
+				clock-output-names = "clk-m-fvdp-proc-alt",
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     ""; /* Unused */
+			};
+
+			clk_m_a1_div3: clk-m-a1-div3 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf3",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */
+					 <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */
+
+				clock-output-names = "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     ""; /* Unused */
+			};
+		};
+
+		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 {
 			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <500000000>;
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_m_a0_div1 2>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		clockgen-a@fd345000 {
+			reg = <0xfd345000 0xb50>;
+
+			clk_m_a2_pll0: clk-m-a2-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a2-pll0-phi0",
+						     "clk-m-a2-pll0-phi1",
+						     "clk-m-a2-pll0-phi2",
+						     "clk-m-a2-pll0-phi3";
+			};
+
+			clk_m_a2_pll1: clk-m-a2-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a2-pll1-phi0",
+						     "clk-m-a2-pll1-phi1",
+						     "clk-m-a2-pll1-phi2",
+						     "clk-m-a2-pll1-phi3";
+			};
+
+			clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c32",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a2-osc-prediv";
+			};
+
+			clk_m_a2_div0: clk-m-a2-div0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf0",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */
+					 <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */
+
+				clock-output-names = "clk-m-vtac-main-phy",
+						     "clk-m-vtac-aux-phy",
+						     "clk-m-stac-phy",
+						     "clk-m-stac-sys",
+						     "", /* clk-m-mpestac-pg */
+						     "", /* clk-m-mpestac-wc */
+						     "", /* clk-m-mpevtacaux-pg*/
+						     ""; /* clk-m-mpevtacmain-pg*/
+			};
+
+			clk_m_a2_div1: clk-m-a2-div1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf1",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */
+					 <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */
+
+				clock-output-names = "", /* clk-m-mpevtacrx0-wc */
+						     "", /* clk-m-mpevtacrx1-wc */
+						     "clk-m-compo-main",
+						     "clk-m-compo-aux",
+						     "clk-m-bdisp-0",
+						     "clk-m-bdisp-1",
+						     "clk-m-icn-bdisp-0",
+						     "clk-m-icn-bdisp-1";
+			};
+
+			clk_m_a2_div2: clk-m-a2-div2 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf2",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */
+					 <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */
+
+				clock-output-names = "", /* clk-m-icn-hqvdp0 */
+						     "", /* clk-m-icn-hqvdp1 */
+						     "clk-m-icn-compo",
+						     "", /* clk-m-icn-vdpaux */
+						     "clk-m-icn-ts",
+						     "clk-m-icn-reg-lp-10",
+						     "clk-m-dcephy-impctrl",
+						     ""; /* Unused */
+			};
+
+			clk_m_a2_div3: clk-m-a2-div3 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf3",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */
+					 <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */
+
+				clock-output-names = ""; /* Unused */
+						/* Remaining outputs unused */
+			};
+		};
+
+		/*
+		 * A9 PLL
+		 */
+		clockgen-a9@fdde00d8 {
+			reg = <0xfdde00d8 0x70>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih415-plls-c32-a9", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
 		};
 
 		/*
-		 * Bootloader initialized system infrastructure clock for
-		 * serial devices.
+		 * ARM CPU related clocks
 		 */
-		CLKS_ICN_REG_0: CLKS_ICN_REG_0 {
+		clk_m_a9: clk-m-a9@fdde00d8 {
 			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
+			compatible = "st,stih415-clkgen-a9-mux", "st,clkgen-mux";
+			reg = <0xfdde00d8 0x4>;
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_m_a0_div1 2>,
+				 <&clk_m_a9_ext2f_div2>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: clk-m-a9-periphs {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_m_a9>;
+			clock-div = <2>;
+			clock-mult = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
index e56449d41481..8509a037ae21 100644
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -7,6 +7,7 @@
  * publishhed by the Free Software Foundation.
  */
 #include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 / {
 
 	aliases {
@@ -45,35 +46,49 @@
 			#size-cells	= <1>;
 			compatible	= "st,stih415-sbc-pinctrl";
 			st,syscfg	= <&syscfg_sbc>;
+			reg 		= <0xfe61f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
 			ranges 		= <0 0xfe610000 0x5000>;
 
 			PIO0: gpio@fe610000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO0";
 			};
 			PIO1: gpio@fe611000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO1";
 			};
 			PIO2: gpio@fe612000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO2";
 			};
 			PIO3: gpio@fe613000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO3";
 			};
 			PIO4: gpio@fe614000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
 				st,bank-name	= "PIO4";
 			};
@@ -87,6 +102,22 @@
 				};
 			};
 
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&PIO0 2 ALT2 IN>;
+						keyin1 = <&PIO0 3 ALT2 IN>;
+						keyin2 = <&PIO0 4 ALT2 IN>;
+						keyin3 = <&PIO2 6 ALT2 IN>;
+
+						keyout0 = <&PIO1 6 ALT2 OUT>;
+						keyout1 = <&PIO1 7 ALT2 OUT>;
+						keyout2 = <&PIO0 6 ALT2 OUT>;
+						keyout3 = <&PIO2 7 ALT2 OUT>;
+					};
+				};
+			};
+
 			sbc_i2c0 {
 				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
 					st,pins {
@@ -104,6 +135,64 @@
 					};
 				};
 			};
+
+			rc{
+				pinctrl_ir: ir0 {
+					st,pins {
+						ir = <&PIO4 0 ALT2 IN>;
+					};
+				};
+			};
+
+			gmac1 {
+				pinctrl_mii1: mii1 {
+						st,pins {
+						 txd0   = <&PIO0 0 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txd1   = <&PIO0 1 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txd2   = <&PIO0 2 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txd3   = <&PIO0 3 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txer   = <&PIO0 4 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txen   = <&PIO0 5 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txclk  = <&PIO0 6 ALT1 IN   NICLK	0	CLK_A>;
+						 col    = <&PIO0 7 ALT1 IN   BYPASS	1000>;
+						 mdio   = <&PIO1 0 ALT1 OUT  BYPASS	0>;
+						 mdc    = <&PIO1 1 ALT1 OUT  NICLK	0	CLK_A>;
+						 crs    = <&PIO1 2 ALT1 IN   BYPASS	1000>;
+						 mdint  = <&PIO1 3 ALT1 IN   BYPASS	0>;
+						 rxd0   = <&PIO1 4 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxd1   = <&PIO1 5 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxd2   = <&PIO1 6 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxd3   = <&PIO1 7 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxdv   = <&PIO2 0 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rx_er  = <&PIO2 1 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxclk  = <&PIO2 2 ALT1 IN   NICLK	0	CLK_A>;
+						 phyclk = <&PIO2 3 ALT1 IN   NICLK	1000	CLK_A>;
+					};
+				};
+
+				pinctrl_rgmii1: rgmii1-0 {
+					st,pins {
+						 txd0 =	 <&PIO0 0 ALT1 OUT DE_IO	1000	CLK_A>;
+						 txd1 =	 <&PIO0 1 ALT1 OUT DE_IO	1000	CLK_A>;
+						 txd2 =	 <&PIO0 2 ALT1 OUT DE_IO	1000	CLK_A>;
+						 txd3 =	 <&PIO0 3 ALT1 OUT DE_IO	1000	CLK_A>;
+						 txen =	 <&PIO0 5 ALT1 OUT DE_IO	0	CLK_A>;
+						 txclk = <&PIO0 6 ALT1 IN	NICLK	0	CLK_A>;
+						 mdio =	 <&PIO1 0 ALT1 OUT	BYPASS	0>;
+						 mdc =	 <&PIO1 1 ALT1 OUT	NICLK	0	CLK_A>;
+						 rxd0 =	 <&PIO1 4 ALT1 IN DE_IO	0	CLK_A>;
+						 rxd1 =	 <&PIO1 5 ALT1 IN DE_IO	0	CLK_A>;
+						 rxd2 =	 <&PIO1 6 ALT1 IN DE_IO	0	CLK_A>;
+						 rxd3 =	 <&PIO1 7 ALT1 IN DE_IO	0	CLK_A>;
+
+						 rxdv =	  <&PIO2 0 ALT1 IN DE_IO	500	CLK_A>;
+						 rxclk =  <&PIO2 2 ALT1 IN	NICLK	0	CLK_A>;
+						 phyclk = <&PIO2 3 ALT4 OUT	NICLK	0	CLK_B>;
+
+						 clk125= <&PIO3 7 ALT4 IN 	NICLK	0	CLK_A>;
+					};
+				};
+			};
 		};
 
 		pin-controller-front {
@@ -111,53 +200,73 @@
 			#size-cells	= <1>;
 			compatible	= "st,stih415-front-pinctrl";
 			st,syscfg	= <&syscfg_front>;
+			reg 		= <0xfee0f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfee00000 0x8000>;
 
 			PIO5: gpio@fee00000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO5";
 			};
 			PIO6: gpio@fee01000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO6";
 			};
 			PIO7: gpio@fee02000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO7";
 			};
 			PIO8: gpio@fee03000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO8";
 			};
 			PIO9: gpio@fee04000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
 				st,bank-name	= "PIO9";
 			};
 			PIO10: gpio@fee05000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
 				st,bank-name	= "PIO10";
 			};
 			PIO11: gpio@fee06000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x6000 0x100>;
 				st,bank-name	= "PIO11";
 			};
 			PIO12: gpio@fee07000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x7000 0x100>;
 				st,bank-name	= "PIO12";
 			};
@@ -186,41 +295,57 @@
 			#size-cells	= <1>;
 			compatible	= "st,stih415-rear-pinctrl";
 			st,syscfg	= <&syscfg_rear>;
+			reg 		= <0xfe82f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfe820000 0x8000>;
 
 			PIO13: gpio@fe820000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO13";
 			};
 			PIO14: gpio@fe821000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO14";
 			};
 			PIO15: gpio@fe822000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO15";
 			};
 			PIO16: gpio@fe823000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO16";
 			};
 			PIO17: gpio@fe824000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
 				st,bank-name	= "PIO17";
 			};
 			PIO18: gpio@fe825000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
 				st,bank-name	= "PIO18";
 			};
@@ -233,6 +358,77 @@
 					};
 				};
 			};
+
+			gmac0{
+				pinctrl_mii0: mii0 {
+					st,pins {
+					 mdint =	<&PIO13 6 ALT2	IN	BYPASS		0>;
+					 txen =		<&PIO13 7 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
+
+					 txd0 =		<&PIO14 0 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
+					 txd1 =		<&PIO14 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
+					 txd2 =		<&PIO14 2 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
+					 txd3 =		<&PIO14 3 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
+
+					 txclk =	<&PIO15 0 ALT2	IN	NICLK		0	CLK_A>;
+					 txer =		<&PIO15 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
+					 crs =		<&PIO15 2 ALT2	IN	BYPASS		1000>;
+					 col =		<&PIO15 3 ALT2	IN	BYPASS		1000>;
+					 mdio  =        <&PIO15 4 ALT2	OUT	BYPASS 	3000>;
+					 mdc   =        <&PIO15 5 ALT2	OUT     NICLK  	0    	CLK_B>;
+
+					 rxd0 =		<&PIO16 0 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxd1 =		<&PIO16 1 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxd2 =		<&PIO16 2 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxd3 =		<&PIO16 3 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxdv =		<&PIO15 6 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rx_er =	<&PIO15 7 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxclk =	<&PIO17 0 ALT2	IN	NICLK		0	CLK_A>;
+					 phyclk =	<&PIO13 5 ALT2	OUT	NICLK	1000	CLK_A>;
+
+					};
+				};
+
+			pinctrl_gmii0: gmii0 {
+				st,pins {
+					 mdint =	<&PIO13 6	ALT2 IN		BYPASS	0>;
+					 mdio  =        <&PIO15 4 	ALT2 OUT	BYPASS 	3000>;
+					 mdc   =        <&PIO15 5 	ALT2 OUT    	NICLK  	0    	CLK_B>;
+					 txen =		<&PIO13 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
+
+					 txd0 =		<&PIO14 0	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
+					 txd1 =		<&PIO14 1	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
+					 txd2 =		<&PIO14 2	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd3 =		<&PIO14 3	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd4 =		<&PIO14 4	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd5 =		<&PIO14 5	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd6 =		<&PIO14 6	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd7 =		<&PIO14 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+
+					 txclk =	<&PIO15 0	ALT2 IN		NICLK	0	CLK_A>;
+					 txer =		<&PIO15 1	ALT2 OUT 	SE_NICLK_IO	3000	CLK_A>;
+					 crs =		<&PIO15 2	ALT2 IN		BYPASS	1000>;
+					 col =		<&PIO15 3	ALT2 IN		BYPASS	1000>;
+					 rxdv =		<&PIO15 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rx_er =	<&PIO15 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+
+					 rxd0 =		<&PIO16 0	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd1 =		<&PIO16 1	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd2 =		<&PIO16 2	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd3 =		<&PIO16 3	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd4 =		<&PIO16 4	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd5 =		<&PIO16 5	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd6 =		<&PIO16 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd7 =		<&PIO16 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+
+					 rxclk =	<&PIO17 0	ALT2 IN	NICLK	0	CLK_A>;
+					 clk125 =	<&PIO17 6	ALT1 IN	NICLK	0	CLK_A>;
+                                         phyclk =       <&PIO13 5       ALT4 OUT NICLK   0       CLK_B>;
+
+
+					};
+				};
+			};
 		};
 
 		pin-controller-left {
@@ -240,23 +436,33 @@
 			#size-cells	= <1>;
 			compatible	= "st,stih415-left-pinctrl";
 			st,syscfg	= <&syscfg_left>;
+			reg 		= <0xfd6bf080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfd6b0000 0x3000>;
 
 			PIO100: gpio@fd6b0000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO100";
 			};
 			PIO101: gpio@fd6b1000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO101";
 			};
 			PIO102: gpio@fd6b2000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO102";
 			};
@@ -267,35 +473,49 @@
 			#size-cells	= <1>;
 			compatible	= "st,stih415-right-pinctrl";
 			st,syscfg	= <&syscfg_right>;
+			reg 		= <0xfd33f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfd330000 0x5000>;
 
 			PIO103: gpio@fd330000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO103";
 			};
 			PIO104: gpio@fd331000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO104";
 			};
 			PIO105: gpio@fd332000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO105";
 			};
 			PIO106: gpio@fd333000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO106";
 			};
 			PIO107: gpio@fd334000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
 				st,bank-name	= "PIO107";
 			};
diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
index d9c7dd1d95a4..d6f254f302fe 100644
--- a/arch/arm/boot/dts/stih415.dtsi
+++ b/arch/arm/boot/dts/stih415.dtsi
@@ -10,6 +10,7 @@
 #include "stih415-clock.dtsi"
 #include "stih415-pinctrl.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset-controller/stih415-resets.h>
 / {
 
 	L2: cache-controller {
@@ -28,6 +29,16 @@
 		ranges;
 		compatible	= "simple-bus";
 
+		powerdown: powerdown-controller {
+			#reset-cells = <1>;
+			compatible = "st,stih415-powerdown";
+		};
+
+		softreset: softreset-controller {
+			#reset-cells = <1>;
+			compatible = "st,stih415-softreset";
+		};
+
 		syscfg_sbc: sbc-syscfg@fe600000{
 			compatible      = "st,stih415-sbc-syscfg", "syscon";
 			reg		= <0xfe600000 0xb4>;
@@ -71,7 +82,7 @@
 			interrupts	= <0 197 0>;
 			pinctrl-names 	= "default";
 			pinctrl-0 	= <&pinctrl_serial2>;
-			clocks		= <&CLKS_ICN_REG_0>;
+			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
 		};
 
 		/* SBC comms block ASCs in SASG1 */
@@ -80,7 +91,7 @@
 			status 		= "disabled";
 			reg		= <0xfe531000 0x2c>;
 			interrupts	= <0 210 0>;
-			clocks		= <&CLK_SYSIN>;
+			clocks		= <&clk_sysin>;
 			pinctrl-names 	= "default";
 			pinctrl-0	= <&pinctrl_sbc_serial1>;
 		};
@@ -89,7 +100,7 @@
 			compatible	= "st,comms-ssc4-i2c";
 			reg		= <0xfed40000 0x110>;
 			interrupts	= <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&CLKS_ICN_REG_0>;
+			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
 			clock-names	= "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names	= "default";
@@ -102,7 +113,7 @@
 			compatible	= "st,comms-ssc4-i2c";
 			reg		= <0xfed41000 0x110>;
 			interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&CLKS_ICN_REG_0>;
+			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
 			clock-names	= "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names	= "default";
@@ -115,7 +126,7 @@
 			compatible	= "st,comms-ssc4-i2c";
 			reg		= <0xfe540000 0x110>;
 			interrupts	= <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&CLK_SYSIN>;
+			clocks		= <&clk_sysin>;
 			clock-names	= "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names	= "default";
@@ -128,7 +139,7 @@
 			compatible	= "st,comms-ssc4-i2c";
 			reg		= <0xfe541000 0x110>;
 			interrupts	= <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&CLK_SYSIN>;
+			clocks		= <&clk_sysin>;
 			clock-names	= "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names	= "default";
@@ -136,5 +147,76 @@
 
 			status		= "disabled";
 		};
+
+		ethernet0: dwmac@fe810000 {
+			device_type 	= "network";
+			compatible	= "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
+			status 		= "disabled";
+
+			reg 		= <0xfe810000 0x8000>, <0x148 0x4>;
+			reg-names	= "stmmaceth", "sti-ethconf";
+
+			interrupts 	= <0 147 0>, <0 148 0>, <0 149 0>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			resets			= <&softreset STIH415_ETH0_SOFTRESET>;
+			reset-names		= "stmmaceth";
+
+			snps,pbl 	= <32>;
+			snps,mixed-burst;
+			snps,force_sf_dma_mode;
+
+			st,syscon	= <&syscfg_rear>;
+
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_mii0>;
+			clock-names	= "stmmaceth";
+			clocks		= <&clk_s_a1_ls CLK_GMAC0_PHY>;
+		};
+
+		ethernet1: dwmac@fef08000 {
+			device_type = "network";
+			compatible	= "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
+			status 		= "disabled";
+			reg		= <0xfef08000 0x8000>, <0x74 0x4>;
+			reg-names	= "stmmaceth", "sti-ethconf";
+			interrupts 	= <0 150 0>, <0 151 0>, <0 152 0>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+
+			snps,pbl	= <32>;
+			snps,mixed-burst;
+			snps,force_sf_dma_mode;
+
+			st,syscon		= <&syscfg_sbc>;
+
+			resets			= <&softreset STIH415_ETH1_SOFTRESET>;
+			reset-names		= "stmmaceth";
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_mii1>;
+			clock-names	= "stmmaceth";
+			clocks		= <&clk_s_a0_ls CLK_ETH1_PHY>;
+		};
+
+		rc: rc@fe518000 {
+			compatible	= "st,comms-irb";
+			reg		= <0xfe518000 0x234>;
+			interrupts	=  <0 203 0>;
+			clocks		= <&clk_sysin>;
+			rx-mode		= "infrared";
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_ir>;
+			resets		= <&softreset STIH415_IRB_SOFTRESET>;
+		};
+
+		keyscan: keyscan@fe4b0000 {
+			compatible = "st,sti-keyscan";
+			status = "disabled";
+			reg = <0xfe4b0000 0x2000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+			clocks = <&clk_sysin>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_keyscan>;
+			resets	= <&powerdown STIH415_KEYSCAN_POWERDOWN>,
+				  <&softreset STIH415_KEYSCAN_SOFTRESET>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih416-b2000.dts b/arch/arm/boot/dts/stih416-b2000.dts
index a5eb6eee10bf..488e80a5d69d 100644
--- a/arch/arm/boot/dts/stih416-b2000.dts
+++ b/arch/arm/boot/dts/stih416-b2000.dts
@@ -9,8 +9,7 @@
 /dts-v1/;
 #include "stih416.dtsi"
 #include "stih41x-b2000.dtsi"
-
 / {
-	compatible = "st,stih416", "st,stih416-b2000";
 	model = "STiH416 B2000";
+	compatible = "st,stih416-b2000", "st,stih416";
 };
diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts
new file mode 100644
index 000000000000..ba0fa2caaf18
--- /dev/null
+++ b/arch/arm/boot/dts/stih416-b2020-revE.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Lee Jones <lee.jones@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih416.dtsi"
+#include "stih41x-b2020.dtsi"
+/ {
+	model = "STiH416 B2020 REV-E";
+	compatible = "st,stih416-b2020", "st,stih416";
+
+	soc {
+		leds {
+			compatible = "gpio-leds";
+			red {
+				#gpio-cells		= <1>;
+				label			= "Front Panel LED";
+				gpios			= <&PIO4 1>;
+				linux,default-trigger	= "heartbeat";
+			};
+			green {
+				gpios			= <&PIO1 3>;
+				default-state 		= "off";
+			};
+		};
+
+		ethernet1: dwmac@fef08000 {
+			snps,reset-gpio = <&PIO0 7>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts
index 276f28da573a..4e2df66b99ea 100644
--- a/arch/arm/boot/dts/stih416-b2020.dts
+++ b/arch/arm/boot/dts/stih416-b2020.dts
@@ -11,6 +11,5 @@
 #include "stih41x-b2020.dtsi"
 / {
 	model = "STiH416 B2020";
-	compatible = "st,stih416", "st,stih416-b2020";
-
+	compatible = "st,stih416-b2020", "st,stih416";
 };
diff --git a/arch/arm/boot/dts/stih416-clock.dtsi b/arch/arm/boot/dts/stih416-clock.dtsi
index 7026bf1158d8..5b4fb838cddb 100644
--- a/arch/arm/boot/dts/stih416-clock.dtsi
+++ b/arch/arm/boot/dts/stih416-clock.dtsi
@@ -6,36 +6,751 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+#include <dt-bindings/clock/stih416-clks.h>
+
 / {
 	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
 		/*
 		 * Fixed 30MHz oscillator inputs to SoC
 		 */
-		CLK_SYSIN: CLK_SYSIN {
+		clk_sysin: clk-sysin {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <30000000>;
-			clock-output-names = "CLK_SYSIN";
+		};
+
+		/*
+		 * ClockGenAs on SASG2
+		 */
+		clockgen-a@fee62000 {
+			reg = <0xfee62000 0xb48>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-plls-c65";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll0-hs",
+						     "clk-s-a0-pll0-ls",
+						     "clk-s-a0-pll1";
+			};
+
+			clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c65",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-osc-prediv";
+			};
+
+			clk_s_a0_hs: clk-s-a0-hs {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-hs",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a0_osc_prediv>,
+					 <&clk_s_a0_pll 0>, /* PLL0 HS */
+					 <&clk_s_a0_pll 2>; /* PLL1 */
+
+				clock-output-names = "clk-s-fdma-0",
+						     "clk-s-fdma-1",
+						     ""; /* clk-s-jit-sense */
+						     /* Fourth output unused */
+			};
+
+			clk_s_a0_ls: clk-s-a0-ls {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-ls",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a0_osc_prediv>,
+					 <&clk_s_a0_pll 1>, /* PLL0 LS */
+					 <&clk_s_a0_pll 2>; /* PLL1 */
+
+				clock-output-names = "clk-s-icn-reg-0",
+						     "clk-s-icn-if-0",
+						     "clk-s-icn-reg-lp-0",
+						     "clk-s-emiss",
+						     "clk-s-eth1-phy",
+						     "clk-s-mii-ref-out";
+						     /* Remaining outputs unused */
+			};
+		};
+
+		clockgen-a@fee81000 {
+			reg = <0xfee81000 0xb48>;
+
+			clk_s_a1_pll: clk-s-a1-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-plls-c65";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a1-pll0-hs",
+						     "clk-s-a1-pll0-ls",
+						     "clk-s-a1-pll1";
+			};
+
+			clk_s_a1_osc_prediv: clk-s-a1-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c65",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a1-osc-prediv";
+			};
+
+			clk_s_a1_hs: clk-s-a1-hs {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-hs",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a1_osc_prediv>,
+					 <&clk_s_a1_pll 0>, /* PLL0 HS */
+					 <&clk_s_a1_pll 2>; /* PLL1 */
+
+				clock-output-names = "", /* Reserved */
+						     "", /* Reserved */
+						     "clk-s-stac-phy",
+						     "clk-s-vtac-tx-phy";
+			};
+
+			clk_s_a1_ls: clk-s-a1-ls {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-ls",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a1_osc_prediv>,
+					 <&clk_s_a1_pll 1>, /* PLL0 LS */
+					 <&clk_s_a1_pll 2>; /* PLL1 */
+
+				clock-output-names = "clk-s-icn-if-2",
+						     "clk-s-card-mmc-0",
+						     "clk-s-icn-if-1",
+						     "clk-s-gmac0-phy",
+						     "clk-s-nand-ctrl",
+						     "", /* Reserved */
+						     "clk-s-mii0-ref-out",
+						     "clk-s-stac-sys",
+						     "clk-s-card-mmc-1";
+						     /* Remaining outputs unused */
+			};
+		};
+
+		/*
+		 * ClockGenAs on MPE42
+		 */
+		clockgen-a@fde12000 {
+			reg = <0xfde12000 0xb50>;
+
+			clk_m_a0_pll0: clk-m-a0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a0-pll0-phi0",
+						     "clk-m-a0-pll0-phi1",
+						     "clk-m-a0-pll0-phi2",
+						     "clk-m-a0-pll0-phi3";
+			};
+
+			clk_m_a0_pll1: clk-m-a0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a0-pll1-phi0",
+						     "clk-m-a0-pll1-phi1",
+						     "clk-m-a0-pll1-phi2",
+						     "clk-m-a0-pll1-phi3";
+			};
+
+			clk_m_a0_osc_prediv: clk-m-a0-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c32",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a0-osc-prediv";
+			};
+
+			clk_m_a0_div0: clk-m-a0-div0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf0",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */
+					 <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */
+
+				clock-output-names = "", /* Unused */
+						     "", /* Unused */
+						     "clk-m-fdma-12",
+						     "", /* Unused */
+						     "clk-m-pp-dmu-0",
+						     "clk-m-pp-dmu-1",
+						     "clk-m-icm-lmi",
+						     "clk-m-vid-dmu-0";
+			};
+
+			clk_m_a0_div1: clk-m-a0-div1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf1",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */
+					 <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */
+
+				clock-output-names = "clk-m-vid-dmu-1",
+						     "", /* Unused */
+						     "clk-m-a9-ext2f",
+						     "clk-m-st40rt",
+						     "clk-m-st231-dmu-0",
+						     "clk-m-st231-dmu-1",
+						     "clk-m-st231-aud",
+						     "clk-m-st231-gp-0";
+			};
+
+			clk_m_a0_div2: clk-m-a0-div2 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf2",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */
+					 <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */
+
+				clock-output-names = "clk-m-st231-gp-1",
+						     "clk-m-icn-cpu",
+						     "clk-m-icn-stac",
+						     "clk-m-tx-icn-dmu-0",
+						     "clk-m-tx-icn-dmu-1",
+						     "clk-m-tx-icn-ts",
+						     "clk-m-icn-vdp-0",
+						     "clk-m-icn-vdp-1";
+			};
+
+			clk_m_a0_div3: clk-m-a0-div3 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf3",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */
+					 <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */
+
+				clock-output-names = "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "clk-m-icn-vp8",
+						     "", /* Unused */
+						     "clk-m-icn-reg-11",
+						     "clk-m-a9-trace";
+			};
+		};
+
+		clockgen-a@fd6db000 {
+			reg = <0xfd6db000 0xb50>;
+
+			clk_m_a1_pll0: clk-m-a1-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a1-pll0-phi0",
+						     "clk-m-a1-pll0-phi1",
+						     "clk-m-a1-pll0-phi2",
+						     "clk-m-a1-pll0-phi3";
+			};
+
+			clk_m_a1_pll1: clk-m-a1-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a1-pll1-phi0",
+						     "clk-m-a1-pll1-phi1",
+						     "clk-m-a1-pll1-phi2",
+						     "clk-m-a1-pll1-phi3";
+			};
+
+			clk_m_a1_osc_prediv: clk-m-a1-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c32",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a1-osc-prediv";
+			};
+
+			clk_m_a1_div0: clk-m-a1-div0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf0",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */
+					 <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */
+
+				clock-output-names = "", /* Unused */
+						     "clk-m-fdma-10",
+						     "clk-m-fdma-11",
+						     "clk-m-hva-alt",
+						     "clk-m-proc-sc",
+						     "clk-m-tp",
+						     "clk-m-rx-icn-dmu-0",
+						     "clk-m-rx-icn-dmu-1";
+			};
+
+			clk_m_a1_div1: clk-m-a1-div1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf1",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
+					 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
+
+				clock-output-names = "clk-m-rx-icn-ts",
+						     "clk-m-rx-icn-vdp-0",
+						     "", /* Unused */
+						     "clk-m-prv-t1-bus",
+						     "clk-m-icn-reg-12",
+						     "clk-m-icn-reg-10",
+						     "", /* Unused */
+						     "clk-m-icn-st231";
+			};
+
+			clk_m_a1_div2: clk-m-a1-div2 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf2",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */
+					 <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */
+
+				clock-output-names = "clk-m-fvdp-proc-alt",
+						     "clk-m-icn-reg-13",
+						     "clk-m-tx-icn-gpu",
+						     "clk-m-rx-icn-gpu",
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* clk-m-apb-pm-12 */
+						     ""; /* Unused */
+			};
+
+			clk_m_a1_div3: clk-m-a1-div3 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf3",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */
+					 <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */
+
+				clock-output-names = "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     ""; /* clk-m-gpu-alt */
+			};
+		};
+
+		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_m_a0_div1 2>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		clockgen-a@fd345000 {
+			reg = <0xfd345000 0xb50>;
+
+			clk_m_a2_pll0: clk-m-a2-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a2-pll0-phi0",
+						     "clk-m-a2-pll0-phi1",
+						     "clk-m-a2-pll0-phi2",
+						     "clk-m-a2-pll0-phi3";
+			};
+
+			clk_m_a2_pll1: clk-m-a2-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a2-pll1-phi0",
+						     "clk-m-a2-pll1-phi1",
+						     "clk-m-a2-pll1-phi2",
+						     "clk-m-a2-pll1-phi3";
+			};
+
+			clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c32",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a2-osc-prediv";
+			};
+
+			clk_m_a2_div0: clk-m-a2-div0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf0",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */
+					 <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */
+
+				clock-output-names = "clk-m-vtac-main-phy",
+						     "clk-m-vtac-aux-phy",
+						     "clk-m-stac-phy",
+						     "clk-m-stac-sys",
+						     "", /* clk-m-mpestac-pg */
+						     "", /* clk-m-mpestac-wc */
+						     "", /* clk-m-mpevtacaux-pg*/
+						     ""; /* clk-m-mpevtacmain-pg*/
+			};
+
+			clk_m_a2_div1: clk-m-a2-div1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf1",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */
+					 <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */
+
+				clock-output-names = "", /* clk-m-mpevtacrx0-wc */
+						     "", /* clk-m-mpevtacrx1-wc */
+						     "clk-m-compo-main",
+						     "clk-m-compo-aux",
+						     "clk-m-bdisp-0",
+						     "clk-m-bdisp-1",
+						     "clk-m-icn-bdisp",
+						     "clk-m-icn-compo";
+			};
+
+			clk_m_a2_div2: clk-m-a2-div2 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf2",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */
+					 <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */
+
+				clock-output-names = "clk-m-icn-vdp-2",
+						     "", /* Unused */
+						     "clk-m-icn-reg-14",
+						     "clk-m-mdtp",
+						     "clk-m-jpegdec",
+						     "", /* Unused */
+						     "clk-m-dcephy-impctrl",
+						     ""; /* Unused */
+			};
+
+			clk_m_a2_div3: clk-m-a2-div3 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf3",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */
+					 <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */
+
+				clock-output-names = "", /* Unused */
+						     ""; /* clk-m-apb-pm-11 */
+						     /* Remaining outputs unused */
+			};
+		};
+
+		/*
+		 * A9 PLL
+		 */
+		clockgen-a9@fdde08b0 {
+			reg = <0xfdde08b0 0x70>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih416-plls-c32-a9", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks
+		 */
+		clk_m_a9: clk-m-a9@fdde08ac {
+			#clock-cells = <0>;
+			compatible = "st,stih416-clkgen-a9-mux", "st,clkgen-mux";
+			reg = <0xfdde08ac 0x4>;
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_m_a0_div1 2>,
+				 <&clk_m_a9_ext2f_div2>;
 		};
 
 		/*
 		 * ARM Peripheral clock for timers
 		 */
-		arm_periph_clk: arm_periph_clk {
+		arm_periph_clk: clk-m-a9-periphs {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_m_a9>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * Frequency synthesizers on the SASG2
+		 */
+		clockgen_b0: clockgen-b0@fee108b4 {
+			#clock-cells = <1>;
+			compatible = "st,stih416-quadfs216", "st,quadfs";
+			reg = <0xfee108b4 0x44>;
+
+			clocks = <&clk_sysin>;
+			clock-output-names = "clk-s-usb48",
+					     "clk-s-dss",
+					     "clk-s-stfe-frc-2",
+					     "clk-s-thsens-scard";
+		};
+
+		clockgen_b1: clockgen-b1@fe8308c4 {
+			#clock-cells = <1>;
+			compatible = "st,stih416-quadfs216", "st,quadfs";
+			reg = <0xfe8308c4 0x44>;
+
+			clocks = <&clk_sysin>;
+			clock-output-names = "clk-s-pcm-0",
+					     "clk-s-pcm-1",
+					     "clk-s-pcm-2",
+					     "clk-s-pcm-3";
+		};
+
+		clockgen_c: clockgen-c@fe8307d0 {
+			#clock-cells = <1>;
+			compatible = "st,stih416-quadfs432", "st,quadfs";
+			reg = <0xfe8307d0 0x44>;
+
+			clocks = <&clk_sysin>;
+			clock-output-names = "clk-s-c-fs0-ch0",
+					     "clk-s-c-vcc-sd",
+					     "clk-s-c-fs0-ch2";
+		};
+
+		clk_s_vcc_hd: clk-s-vcc-hd@fe8308b8 {
+			#clock-cells = <0>;
+			compatible = "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux";
+			reg = <0xfe8308b8 0x4>; /* SYSCFG2558 */
+
+			clocks = <&clk_sysin>,
+				 <&clockgen_c 0>;
+		};
+
+		/*
+		 * Add a dummy clock for the HDMI PHY for the VCC input mux
+		 */
+		clk_s_tmds_fromphy: clk-s-tmds-fromphy {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <600000000>;
+			clock-frequency = <0>;
+		};
+
+		clockgen_c_vcc: clockgen-c-vcc@fe8308ac {
+			#clock-cells = <1>;
+			compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
+			reg = <0xfe8308ac 0xc>; /* SYSCFG2555,2556,2557 */
+
+			clocks = <&clk_s_vcc_hd>,
+				 <&clockgen_c 1>,
+				 <&clk_s_tmds_fromphy>,
+				 <&clockgen_c 2>;
+
+			clock-output-names  = "clk-s-pix-hdmi",
+					      "clk-s-pix-dvo",
+					      "clk-s-out-dvo",
+					      "clk-s-pix-hd",
+					      "clk-s-hddac",
+					      "clk-s-denc",
+					      "clk-s-sddac",
+					      "clk-s-pix-main",
+					      "clk-s-pix-aux",
+					      "clk-s-stfe-frc-0",
+					      "clk-s-ref-mcru",
+					      "clk-s-slave-mcru",
+					      "clk-s-tmds-hdmi",
+					      "clk-s-hdmi-reject-pll",
+					      "clk-s-thsens";
+		};
+
+		clockgen_d: clockgen-d@fee107e0 {
+			#clock-cells = <1>;
+			compatible = "st,stih416-quadfs216", "st,quadfs";
+			reg = <0xfee107e0 0x44>;
+
+			clocks = <&clk_sysin>;
+			clock-output-names = "clk-s-ccsc",
+					     "clk-s-stfe-frc-1",
+					     "clk-s-tsout-1",
+					     "clk-s-mchi";
+		};
+
+		/*
+		 * Frequency synthesizers on the MPE42
+		 */
+		clockgen_e: clockgen-e@fd3208bc {
+			#clock-cells = <1>;
+			compatible = "st,stih416-quadfs660-E", "st,quadfs";
+			reg = <0xfd3208bc 0xb0>;
+
+			clocks = <&clk_sysin>;
+			clock-output-names = "clk-m-pix-mdtp-0",
+					     "clk-m-pix-mdtp-1",
+					     "clk-m-pix-mdtp-2",
+					     "clk-m-mpelpc";
+		};
+
+		clockgen_f: clockgen-f@fd320878 {
+			#clock-cells = <1>;
+			compatible = "st,stih416-quadfs660-F", "st,quadfs";
+			reg = <0xfd320878 0xf0>;
+
+			clocks = <&clk_sysin>;
+			clock-output-names = "clk-m-main-vidfs",
+					     "clk-m-hva-fs",
+					     "clk-m-fvdp-vcpu",
+					     "clk-m-fvdp-proc-fs";
+		};
+
+		clk_m_fvdp_proc: clk-m-fvdp-proc@fd320910 {
+			#clock-cells = <0>;
+			compatible = "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux";
+			reg = <0xfd320910 0x4>; /* SYSCFG8580 */
+
+			clocks = <&clk_m_a1_div2 0>,
+				 <&clockgen_f 3>;
+		};
+
+		clk_m_hva: clk-m-hva@fd690868 {
+			#clock-cells = <0>;
+			compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
+			reg = <0xfd690868 0x4>; /* SYSCFG9538 */
+
+			clocks = <&clockgen_f 1>,
+				 <&clk_m_a1_div0 3>;
+		};
+
+		clk_m_f_vcc_hd: clk-m-f-vcc-hd@fd32086c {
+			#clock-cells = <0>;
+			compatible = "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux";
+			reg = <0xfd32086c 0x4>; /* SYSCFG8539 */
+
+			clocks = <&clockgen_c_vcc 7>,
+				 <&clockgen_f 0>;
+		};
+
+		clk_m_f_vcc_sd: clk-m-f-vcc-sd@fd32086c {
+			#clock-cells = <0>;
+			compatible = "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux";
+			reg = <0xfd32086c 0x4>; /* SYSCFG8539 */
+
+			clocks = <&clockgen_c_vcc 8>,
+				 <&clockgen_f 1>;
 		};
 
 		/*
-		 * Bootloader initialized system infrastructure clock for
-		 * serial devices.
+		 * Add a dummy clock for the HDMIRx external signal clock
 		 */
-		CLK_S_ICN_REG_0: clockgenA0@4 {
+		clk_m_pix_hdmirx_sas: clk-m-pix-hdmirx-sas {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
-			clock-output-names = "CLK_S_ICN_REG_0";
+			clock-frequency = <0>;
+		};
+
+		clockgen_f_vcc: clockgen-f-vcc@fd32086c {
+			#clock-cells = <1>;
+			compatible = "st,stih416-clkgenf", "st,clkgen-vcc";
+			reg = <0xfd32086c 0xc>; /* SYSCFG8539,8540,8541 */
+
+			clocks = <&clk_m_f_vcc_hd>,
+				 <&clk_m_f_vcc_sd>,
+				 <&clockgen_f 0>,
+				 <&clk_m_pix_hdmirx_sas>;
+
+			clock-output-names  = "clk-m-pix-main-pipe",
+					      "clk-m-pix-aux-pipe",
+					      "clk-m-pix-main-cru",
+					      "clk-m-pix-aux-cru",
+					      "clk-m-xfer-be-compo",
+					      "clk-m-xfer-pip-compo",
+					      "clk-m-xfer-aux-compo",
+					      "clk-m-vsens",
+					      "clk-m-pix-hdmirx-0",
+					      "clk-m-pix-hdmirx-1";
+		};
+
+		/*
+		 * DDR PLL
+		 */
+		clockgen-ddr@0xfdde07d8 {
+			reg = <0xfdde07d8 0x110>;
+
+			clockgen_ddr_pll: clockgen-ddr-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+				clock-output-names = "clockgen-ddr0",
+						     "clockgen-ddr1";
+			};
+		};
+
+		/*
+		 * GPU PLL
+		 */
+		clockgen-gpu@fd68ff00 {
+			reg = <0xfd68ff00 0x910>;
+
+			clockgen_gpu_pll: clockgen-gpu-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32";
+
+				clocks = <&clk_sysin>;
+				clock-output-names = "clockgen-gpu-pll";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index b29ff4ba542c..ee6c119e261e 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -8,6 +8,7 @@
  * publishhed by the Free Software Foundation.
  */
 #include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 / {
 
 	aliases {
@@ -49,46 +50,69 @@
 			#size-cells	= <1>;
 			compatible	= "st,stih416-sbc-pinctrl";
 			st,syscfg	= <&syscfg_sbc>;
+			reg 		= <0xfe61f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfe610000 0x6000>;
 
 			PIO0: gpio@fe610000 {
 				gpio-controller;
 				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO0";
 			};
 			PIO1: gpio@fe611000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO1";
 			};
 			PIO2: gpio@fe612000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO2";
 			};
 			PIO3: gpio@fe613000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO3";
 			};
 			PIO4: gpio@fe614000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
 				st,bank-name	= "PIO4";
 			};
 			PIO40: gpio@fe615000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
 				st,bank-name	= "PIO40";
 				st,retime-pin-mask = <0x7f>;
 			};
 
+			rc{
+				pinctrl_ir: ir0 {
+					st,pins {
+						ir = <&PIO4 0 ALT2 IN>;
+					};
+				};
+			};
 			sbc_serial1 {
 				pinctrl_sbc_serial1: sbc_serial1 {
 					st,pins {
@@ -98,6 +122,22 @@
 				};
 			};
 
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&PIO0 2 ALT2 IN>;
+						keyin1 = <&PIO0 3 ALT2 IN>;
+						keyin2 = <&PIO0 4 ALT2 IN>;
+						keyin3 = <&PIO2 6 ALT2 IN>;
+
+						keyout0 = <&PIO1 6 ALT2 OUT>;
+						keyout1 = <&PIO1 7 ALT2 OUT>;
+						keyout2 = <&PIO0 6 ALT2 OUT>;
+						keyout3 = <&PIO2 7 ALT2 OUT>;
+					};
+				};
+			};
+
 			sbc_i2c0 {
 				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
 					st,pins {
@@ -115,6 +155,58 @@
 					};
 				};
 			};
+
+			gmac1 {
+				pinctrl_mii1: mii1 {
+					st,pins {
+						txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
+						col =   <&PIO0 7 ALT1 IN BYPASS 1000>;
+
+						mdio =  <&PIO1 0 ALT1 OUT BYPASS 1500>;
+						mdc =   <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
+						crs =   <&PIO1 2 ALT1 IN BYPASS 1000>;
+						mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
+						rxd0 =  <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 =  <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 =  <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 =  <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+						rxdv =  <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
+						phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+				pinctrl_rgmii1: rgmii1-0 {
+					st,pins {
+						txd0 =  <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>;
+						txd1 =  <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>;
+						txd2 =  <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>;
+						txd3 =  <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>;
+						txen =  <&PIO0 5 ALT1 OUT DE_IO 0   CLK_A>;
+						txclk = <&PIO0 6 ALT1 IN  NICLK 0   CLK_A>;
+
+						mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
+						mdc  = <&PIO1 1 ALT1 OUT NICLK  0 CLK_A>;
+						rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>;
+						rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>;
+						rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>;
+						rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>;
+
+						rxdv   = <&PIO2 0 ALT1 IN  DE_IO 500 CLK_A>;
+						rxclk  = <&PIO2 2 ALT1 IN  NICLK 0   CLK_A>;
+						phyclk = <&PIO2 3 ALT4 OUT NICLK 0   CLK_B>;
+
+						clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
+					};
+				};
+			};
 		};
 
 		pin-controller-front {
@@ -122,65 +214,89 @@
 			#size-cells	= <1>;
 			compatible	= "st,stih416-front-pinctrl";
 			st,syscfg	= <&syscfg_front>;
+			reg 		= <0xfee0f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfee00000 0x10000>;
 
 			PIO5: gpio@fee00000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO5";
 			};
 			PIO6: gpio@fee01000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO6";
 			};
 			PIO7: gpio@fee02000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO7";
 			};
 			PIO8: gpio@fee03000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO8";
 			};
 			PIO9: gpio@fee04000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
 				st,bank-name	= "PIO9";
 			};
 			PIO10: gpio@fee05000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
 				st,bank-name	= "PIO10";
 			};
 			PIO11: gpio@fee06000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x6000 0x100>;
 				st,bank-name	= "PIO11";
 			};
 			PIO12: gpio@fee07000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x7000 0x100>;
 				st,bank-name	= "PIO12";
 			};
 			PIO30: gpio@fee08000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x8000 0x100>;
 				st,bank-name	= "PIO30";
 			};
 			PIO31: gpio@fee09000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x9000 0x100>;
 				st,bank-name	= "PIO31";
 			};
@@ -210,6 +326,19 @@
 					};
 				};
 			};
+
+			fsm {
+				pinctrl_fsm: fsm {
+					st,pins {
+						spi-fsm-clk  = <&PIO12 2 ALT1 OUT>;
+						spi-fsm-cs   = <&PIO12 3 ALT1 OUT>;
+						spi-fsm-mosi = <&PIO12 4 ALT1 OUT>;
+						spi-fsm-miso = <&PIO12 5 ALT1 IN>;
+						spi-fsm-hol  = <&PIO12 6 ALT1 OUT>;
+						spi-fsm-wp   = <&PIO12 7 ALT1 OUT>;
+					};
+				};
+			};
 		};
 
 		pin-controller-rear {
@@ -217,41 +346,57 @@
 			#size-cells	= <1>;
 			compatible	= "st,stih416-rear-pinctrl";
 			st,syscfg	= <&syscfg_rear>;
+			reg 		= <0xfe82f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
 			ranges 		= <0 0xfe820000 0x6000>;
 
 			PIO13: gpio@fe820000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO13";
 			};
 			PIO14: gpio@fe821000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO14";
 			};
 			PIO15: gpio@fe822000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO15";
 			};
 			PIO16: gpio@fe823000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO16";
 			};
 			PIO17: gpio@fe824000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
 				st,bank-name	= "PIO17";
 			};
 			PIO18: gpio@fe825000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
 				st,bank-name	= "PIO18";
 				st,retime-pin-mask = <0xf>;
@@ -265,6 +410,63 @@
 					};
 				};
 			};
+
+			gmac0 {
+				pinctrl_mii0: mii0 {
+					st,pins {
+						mdint = <&PIO13 6 ALT2 IN  BYPASS      0>;
+						txen =  <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						txd0 =  <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 =  <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 =  <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+						txd3 =  <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+
+						txclk = <&PIO15 0 ALT2 IN  NICLK       0 CLK_A>;
+						txer =  <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						crs = <&PIO15 2 ALT2 IN  BYPASS 1000>;
+						col = <&PIO15 3 ALT2 IN  BYPASS 1000>;
+						mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>;
+						mdc = <&PIO15 5 ALT2 OUT NICLK  0    CLK_B>;
+
+						rxd0 =  <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 =  <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 =  <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 =  <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxdv =  <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
+						phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>;
+					};
+				};
+
+				pinctrl_gmii0: gmii0 {
+					st,pins {
+						};
+				};
+				pinctrl_rgmii0: rgmii0 {
+					st,pins {
+						 phyclk = <&PIO13  5 ALT4 OUT NICLK 0 CLK_B>;
+						 txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>;
+						 txd0  = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>;
+						 txd1  = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>;
+						 txd2  = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>;
+						 txd3  = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>;
+						 txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
+
+						 mdio = <&PIO15 4 ALT2 OUT BYPASS 0>;
+						 mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+						 rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>;
+						 rxd0 =<&PIO16 0 ALT2 IN DE_IO	500 CLK_A>;
+						 rxd1 =<&PIO16 1 ALT2 IN DE_IO	500 CLK_A>;
+						 rxd2 =<&PIO16 2 ALT2 IN DE_IO	500 CLK_A>;
+						 rxd3  =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>;
+						 rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
+
+						 clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
+					};
+				};
+			};
 		};
 
 		pin-controller-fvdp-fe {
@@ -272,23 +474,33 @@
 			#size-cells	= <1>;
 			compatible	= "st,stih416-fvdp-fe-pinctrl";
 			st,syscfg	= <&syscfg_fvdp_fe>;
+			reg 		= <0xfd6bf080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfd6b0000 0x3000>;
 
 			PIO100: gpio@fd6b0000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO100";
 			};
 			PIO101: gpio@fd6b1000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO101";
 			};
 			PIO102: gpio@fd6b2000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO102";
 			};
@@ -299,29 +511,41 @@
 			#size-cells	= <1>;
 			compatible	= "st,stih416-fvdp-lite-pinctrl";
 			st,syscfg		= <&syscfg_fvdp_lite>;
+			reg 		= <0xfd33f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
 			ranges			= <0 0xfd330000 0x5000>;
 
 			PIO103: gpio@fd330000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
 				st,bank-name	= "PIO103";
 			};
 			PIO104: gpio@fd331000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
 				st,bank-name	= "PIO104";
 			};
 			PIO105: gpio@fd332000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
 				st,bank-name	= "PIO105";
 			};
 			PIO106: gpio@fd333000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
 				st,bank-name	= "PIO106";
 			};
@@ -329,6 +553,8 @@
 			PIO107: gpio@fd334000 {
 				gpio-controller;
 				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
 				st,bank-name	= "PIO107";
 				st,retime-pin-mask = <0xf>;
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index b7ab47b95816..06473c5d9ea9 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -10,6 +10,7 @@
 #include "stih416-clock.dtsi"
 #include "stih416-pinctrl.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset-controller/stih416-resets.h>
 / {
 	L2: cache-controller {
 		compatible = "arm,pl310-cache";
@@ -27,6 +28,16 @@
 		ranges;
 		compatible	= "simple-bus";
 
+		powerdown: powerdown-controller {
+			#reset-cells = <1>;
+			compatible = "st,stih416-powerdown";
+		};
+
+		softreset: softreset-controller {
+			#reset-cells = <1>;
+			compatible = "st,stih416-softreset";
+		};
+
 		syscfg_sbc:sbc-syscfg@fe600000{
 			compatible	= "st,stih416-sbc-syscfg", "syscon";
 			reg		= <0xfe600000 0x1000>;
@@ -78,7 +89,7 @@
 			status 		= "disabled";
 			reg		= <0xfed32000 0x2c>;
 			interrupts	= <0 197 0>;
-			clocks          = <&CLK_S_ICN_REG_0>;
+			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
 			pinctrl-names 	= "default";
 			pinctrl-0 	= <&pinctrl_serial2 &pinctrl_serial2_oe>;
 		};
@@ -91,14 +102,14 @@
 			interrupts	= <0 210 0>;
 			pinctrl-names 	= "default";
 			pinctrl-0 	= <&pinctrl_sbc_serial1>;
-			clocks          = <&CLK_SYSIN>;
+			clocks          = <&clk_sysin>;
 		};
 
 		i2c@fed40000 {
 			compatible	= "st,comms-ssc4-i2c";
 			reg		= <0xfed40000 0x110>;
 			interrupts	= <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&CLK_S_ICN_REG_0>;
+			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
 			clock-names	= "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names	= "default";
@@ -111,7 +122,7 @@
 			compatible	= "st,comms-ssc4-i2c";
 			reg		= <0xfed41000 0x110>;
 			interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&CLK_S_ICN_REG_0>;
+			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
 			clock-names	= "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names	= "default";
@@ -124,7 +135,7 @@
 			compatible	= "st,comms-ssc4-i2c";
 			reg		= <0xfe540000 0x110>;
 			interrupts	= <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&CLK_SYSIN>;
+			clocks		= <&clk_sysin>;
 			clock-names	= "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names	= "default";
@@ -137,7 +148,7 @@
 			compatible	= "st,comms-ssc4-i2c";
 			reg		= <0xfe541000 0x110>;
 			interrupts	= <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&CLK_SYSIN>;
+			clocks		= <&clk_sysin>;
 			clock-names	= "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names	= "default";
@@ -145,5 +156,85 @@
 
 			status		= "disabled";
 		};
+
+		ethernet0: dwmac@fe810000 {
+			device_type 	= "network";
+			compatible	= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+			status 		= "disabled";
+			reg 		= <0xfe810000 0x8000>, <0x8bc 0x4>;
+			reg-names	= "stmmaceth", "sti-ethconf";
+
+			interrupts = <0 133 0>, <0 134 0>, <0 135 0>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+
+			snps,pbl 	= <32>;
+			snps,mixed-burst;
+
+			st,syscon		= <&syscfg_rear>;
+			resets			= <&softreset STIH416_ETH0_SOFTRESET>;
+			reset-names		= "stmmaceth";
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_mii0>;
+			clock-names	= "stmmaceth";
+			clocks		= <&clk_s_a1_ls CLK_GMAC0_PHY>;
+		};
+
+		ethernet1: dwmac@fef08000 {
+			device_type = "network";
+			compatible		= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+			status 		= "disabled";
+			reg		= <0xfef08000 0x8000>, <0x7f0 0x4>;
+			reg-names	= "stmmaceth", "sti-ethconf";
+			interrupts = <0 136 0>, <0 137 0>, <0 138 0>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+
+			snps,pbl	= <32>;
+			snps,mixed-burst;
+
+			st,syscon	= <&syscfg_sbc>;
+
+			resets		= <&softreset STIH416_ETH1_SOFTRESET>;
+			reset-names	= "stmmaceth";
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_mii1>;
+			clock-names	= "stmmaceth";
+			clocks		= <&clk_s_a0_ls CLK_ETH1_PHY>;
+		};
+
+		rc: rc@fe518000 {
+			compatible	= "st,comms-irb";
+			reg		= <0xfe518000 0x234>;
+			interrupts	=  <0 203 0>;
+			rx-mode         = "infrared";
+			clocks		= <&clk_sysin>;
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_ir>;
+			resets		= <&softreset STIH416_IRB_SOFTRESET>;
+		};
+
+		/* FSM */
+		spifsm: spifsm@fe902000 {
+			compatible	   = "st,spi-fsm";
+			reg		   = <0xfe902000 0x1000>;
+			pinctrl-0	   = <&pinctrl_fsm>;
+
+			st,syscfg	   = <&syscfg_rear>;
+			st,boot-device-reg = <0x958>;
+			st,boot-device-spi = <0x1a>;
+
+			status = "disabled";
+		};
+
+		keyscan: keyscan@fe4b0000 {
+			compatible = "st,sti-keyscan";
+			status = "disabled";
+			reg = <0xfe4b0000 0x2000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+			clocks = <&clk_sysin>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_keyscan>;
+			resets	= <&powerdown STIH416_KEYSCAN_POWERDOWN>,
+				  <&softreset STIH416_KEYSCAN_SOFTRESET>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi
index 1e6aa92772f5..b3dd6ca5c2ae 100644
--- a/arch/arm/boot/dts/stih41x-b2000.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2000.dtsi
@@ -6,6 +6,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * publishhed by the Free Software Foundation.
  */
+#include <dt-bindings/input/input.h>
 / {
 
 	memory{
@@ -14,12 +15,14 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyAS0,115200";
+		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
 		linux,stdout-path = &serial2;
 	};
 
 	aliases {
 		ttyAS0 = &serial2;
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
 	};
 
 	soc {
@@ -46,5 +49,47 @@
 
 			status = "okay";
 		};
+
+		ethernet0: dwmac@fe810000 {
+			status			= "okay";
+			phy-mode		= "mii";
+			pinctrl-0		= <&pinctrl_mii0>;
+
+			snps,reset-gpio 	= <&PIO106 2>;
+			snps,reset-active-low;
+			snps,reset-delays-us 	= <0 10000 10000>;
+		};
+
+		ethernet1: dwmac@fef08000 {
+			status			= "disabled";
+			phy-mode		= "mii";
+			st,tx-retime-src	= "txclk";
+
+			snps,reset-gpio 	= <&PIO4 7>;
+			snps,reset-active-low;
+			snps,reset-delays-us 	= <0 10000 10000>;
+		};
+
+		keyscan: keyscan@fe4b0000 {
+			keypad,num-rows = <4>;
+			keypad,num-columns = <4>;
+			st,debounce-us = <5000>;
+			linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13)
+					 MATRIX_KEY(0x00, 0x01, KEY_F9)
+					 MATRIX_KEY(0x00, 0x02, KEY_F5)
+					 MATRIX_KEY(0x00, 0x03, KEY_F1)
+					 MATRIX_KEY(0x01, 0x00, KEY_F14)
+					 MATRIX_KEY(0x01, 0x01, KEY_F10)
+					 MATRIX_KEY(0x01, 0x02, KEY_F6)
+					 MATRIX_KEY(0x01, 0x03, KEY_F2)
+					 MATRIX_KEY(0x02, 0x00, KEY_F15)
+					 MATRIX_KEY(0x02, 0x01, KEY_F11)
+					 MATRIX_KEY(0x02, 0x02, KEY_F7)
+					 MATRIX_KEY(0x02, 0x03, KEY_F3)
+					 MATRIX_KEY(0x03, 0x00, KEY_F16)
+					 MATRIX_KEY(0x03, 0x01, KEY_F12)
+					 MATRIX_KEY(0x03, 0x02, KEY_F8)
+					 MATRIX_KEY(0x03, 0x03, KEY_F4) >;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
index 0ef0a69df8ea..d8a84295c328 100644
--- a/arch/arm/boot/dts/stih41x-b2020.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
@@ -6,6 +6,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * publishhed by the Free Software Foundation.
  */
+#include "stih41x-b2020x.dtsi"
 / {
 	memory{
 		device_type = "memory";
@@ -13,12 +14,13 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyAS0,115200";
+		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
 		linux,stdout-path = &sbc_serial1;
 	};
 
 	aliases {
 		ttyAS0 = &sbc_serial1;
+		ethernet1 = &ethernet1;
 	};
 	soc {
 		sbc_serial1: serial@fe531000 {
@@ -60,5 +62,17 @@
 		i2c@fe541000 {
 			status = "okay";
 		};
+
+		ethernet1: dwmac@fef08000 {
+			status			= "okay";
+			phy-mode		= "rgmii-id";
+			max-speed		= <1000>;
+			st,tx-retime-src	= "clk_125";
+			snps,reset-gpio 	= <&PIO3 0>;
+			snps,reset-active-low;
+			snps,reset-delays-us 	= <0 10000 10000>;
+
+			pinctrl-0	= <&pinctrl_rgmii1>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih41x-b2020x.dtsi b/arch/arm/boot/dts/stih41x-b2020x.dtsi
new file mode 100644
index 000000000000..df01c1211b32
--- /dev/null
+++ b/arch/arm/boot/dts/stih41x-b2020x.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Lee Jones <lee.jones@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/ {
+	soc {
+		spifsm: spifsm@fe902000 {
+			#address-cells = <1>;
+			#size-cells    = <1>;
+
+			status = "okay";
+
+			partition@0 {
+				label = "SerialFlash1";
+				reg   = <0x00000000 0x00500000>;
+			};
+
+			partition@500000 {
+				label = "SerialFlash2";
+				reg   = <0x00500000 0x00b00000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi
index f5b9898d9c6e..5cb0e63376b5 100644
--- a/arch/arm/boot/dts/stih41x.dtsi
+++ b/arch/arm/boot/dts/stih41x.dtsi
@@ -1,3 +1,10 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index d4b081d6a167..0b97c071dd56 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -13,6 +13,7 @@
 
 /dts-v1/;
 /include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
 	model = "Mele A1000";
@@ -35,6 +36,42 @@
 			};
 		};
 
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
 		pinctrl@01c20800 {
 			emac_power_pin_a1000: emac_power_pin@0 {
 				allwinner,pins = "PH15";
@@ -80,18 +117,22 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&emac_power_pin_a1000>;
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 15 0>;
+	};
 
-		reg_emac_3v3: emac-3v3 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_power_pin_a1000>;
-			regulator-name = "emac-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&pio 7 15 0>;
-		};
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index b139ee6bcf99..c200eacc66e8 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -12,6 +12,7 @@
 
 /dts-v1/;
 /include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
 	model = "Cubietech Cubieboard";
@@ -33,6 +34,43 @@
 			};
 		};
 
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
 		pinctrl@01c20800 {
 			led_pins_cubieboard: led_pins@0 {
 				allwinner,pins = "PH20", "PH21";
@@ -77,4 +115,16 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	reg_ahci_5v: ahci-5v {
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 3a1595f67823..547fadcb984b 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -13,6 +13,7 @@
 
 /dts-v1/;
 /include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
 	model = "Miniand Hackberry";
@@ -35,6 +36,38 @@
 			};
 		};
 
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
 		pio: pinctrl@01c20800 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&hackberry_hogs>;
@@ -45,6 +78,13 @@
 				allwinner,drive = <0>;
 				allwinner,pull = <0>;
 			};
+
+			usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
+					allwinner,pins = "PH12";
+					allwinner,function = "gpio_out";
+					allwinner,drive = <0>;
+					allwinner,pull = <0>;
+			};
 		};
 
 		uart0: serial@01c28000 {
@@ -54,16 +94,22 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 19 0>;
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
 
-		reg_emac_3v3: emac-3v3 {
-			compatible = "regulator-fixed";
-			regulator-name = "emac-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&pio 7 19 0>;
-		};
+	reg_usb2_vbus: usb2-vbus {
+		pinctrl-0 = <&usb2_vbus_pin_hackberry>;
+		gpio = <&pio 7 12 0>;
+		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
new file mode 100644
index 000000000000..f13723e18b86
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2014 Open Source Support GmbH
+ *
+ * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "INet-97F Rev 02";
+	compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index 70b3323caf1a..c01cea50cf0c 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -13,16 +13,57 @@
 
 /dts-v1/;
 /include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
 	model = "PineRiver Mini X-Plus";
 	compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
 
 	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
 			status = "okay";
 		};
 	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
new file mode 100644
index 000000000000..d46a7dbecef5
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -0,0 +1,121 @@
+/*
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Olimex A10-OLinuXino-LIME";
+	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+				allwinner,pins = "PC3";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			led_pins_olinuxinolime: led_pins@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <1>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a10-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 0>;
+			default-state = "on";
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+		gpio = <&pio 2 3 0>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
new file mode 100644
index 000000000000..fb03bccb78d2
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "LinkSprite pcDuino";
+	compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index d4d2763f4794..d96e179490ce 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -19,6 +19,12 @@
 		ethernet0 = &emac;
 		serial0 = &uart0;
 		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial7 = &uart7;
 	};
 
 	cpus {
@@ -52,44 +58,48 @@
 			clock-frequency = <0>;
 		};
 
-		osc24M: osc24M@01c20050 {
+		osc24M: clk@01c20050 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-osc-clk";
+			compatible = "allwinner,sun4i-a10-osc-clk";
 			reg = <0x01c20050 0x4>;
 			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
 		};
 
-		osc32k: osc32k {
+		osc32k: clk@0 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
 		};
 
-		pll1: pll1@01c20000 {
+		pll1: clk@01c20000 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-pll1-clk";
+			compatible = "allwinner,sun4i-a10-pll1-clk";
 			reg = <0x01c20000 0x4>;
 			clocks = <&osc24M>;
+			clock-output-names = "pll1";
 		};
 
-		pll4: pll4@01c20018 {
+		pll4: clk@01c20018 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-pll1-clk";
+			compatible = "allwinner,sun4i-a10-pll1-clk";
 			reg = <0x01c20018 0x4>;
 			clocks = <&osc24M>;
+			clock-output-names = "pll4";
 		};
 
-		pll5: pll5@01c20020 {
+		pll5: clk@01c20020 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-pll5-clk";
+			compatible = "allwinner,sun4i-a10-pll5-clk";
 			reg = <0x01c20020 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll5_ddr", "pll5_other";
 		};
 
-		pll6: pll6@01c20028 {
+		pll6: clk@01c20028 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-pll6-clk";
+			compatible = "allwinner,sun4i-a10-pll6-clk";
 			reg = <0x01c20028 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll6_sata", "pll6_other", "pll6";
@@ -98,21 +108,23 @@
 		/* dummy is 200M */
 		cpu: cpu@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-cpu-clk";
+			compatible = "allwinner,sun4i-a10-cpu-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
 		};
 
 		axi: axi@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-axi-clk";
+			compatible = "allwinner,sun4i-a10-axi-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&cpu>;
+			clock-output-names = "axi";
 		};
 
-		axi_gates: axi_gates@01c2005c {
+		axi_gates: clk@01c2005c {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-axi-gates-clk";
+			compatible = "allwinner,sun4i-a10-axi-gates-clk";
 			reg = <0x01c2005c 0x4>;
 			clocks = <&axi>;
 			clock-output-names = "axi_dram";
@@ -120,14 +132,15 @@
 
 		ahb: ahb@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-ahb-clk";
+			compatible = "allwinner,sun4i-a10-ahb-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&axi>;
+			clock-output-names = "ahb";
 		};
 
-		ahb_gates: ahb_gates@01c20060 {
+		ahb_gates: clk@01c20060 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-ahb-gates-clk";
+			compatible = "allwinner,sun4i-a10-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
 			clock-output-names = "ahb_usb0", "ahb_ehci0",
@@ -145,14 +158,15 @@
 
 		apb0: apb0@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb0-clk";
+			compatible = "allwinner,sun4i-a10-apb0-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&ahb>;
+			clock-output-names = "apb0";
 		};
 
-		apb0_gates: apb0_gates@01c20068 {
+		apb0_gates: clk@01c20068 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-apb0-gates-clk";
+			compatible = "allwinner,sun4i-a10-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
 			clock-output-names = "apb0_codec", "apb0_spdif",
@@ -162,21 +176,23 @@
 
 		apb1_mux: apb1_mux@01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-mux-clk";
+			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1_mux";
 		};
 
 		apb1: apb1@01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-clk";
+			compatible = "allwinner,sun4i-a10-apb1-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&apb1_mux>;
+			clock-output-names = "apb1";
 		};
 
-		apb1_gates: apb1_gates@01c2006c {
+		apb1_gates: clk@01c2006c {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-apb1-gates-clk";
+			compatible = "allwinner,sun4i-a10-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb1>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
@@ -189,7 +205,7 @@
 
 		nand_clk: clk@01c20080 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20080 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "nand";
@@ -197,7 +213,7 @@
 
 		ms_clk: clk@01c20084 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20084 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ms";
@@ -205,7 +221,7 @@
 
 		mmc0_clk: clk@01c20088 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc0";
@@ -213,7 +229,7 @@
 
 		mmc1_clk: clk@01c2008c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc1";
@@ -221,7 +237,7 @@
 
 		mmc2_clk: clk@01c20090 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc2";
@@ -229,7 +245,7 @@
 
 		mmc3_clk: clk@01c20094 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20094 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc3";
@@ -237,7 +253,7 @@
 
 		ts_clk: clk@01c20098 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20098 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ts";
@@ -245,7 +261,7 @@
 
 		ss_clk: clk@01c2009c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2009c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ss";
@@ -253,7 +269,7 @@
 
 		spi0_clk: clk@01c200a0 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a0 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi0";
@@ -261,7 +277,7 @@
 
 		spi1_clk: clk@01c200a4 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a4 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi1";
@@ -269,7 +285,7 @@
 
 		spi2_clk: clk@01c200a8 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a8 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi2";
@@ -277,7 +293,7 @@
 
 		pata_clk: clk@01c200ac {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200ac 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "pata";
@@ -285,7 +301,7 @@
 
 		ir0_clk: clk@01c200b0 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200b0 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ir0";
@@ -293,15 +309,24 @@
 
 		ir1_clk: clk@01c200b4 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200b4 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ir1";
 		};
 
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+		};
+
 		spi3_clk: clk@01c200d4 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200d4 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi3";
@@ -314,6 +339,28 @@
 		#size-cells = <1>;
 		ranges;
 
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		emac: ethernet@01c0b000 {
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
@@ -330,8 +377,126 @@
 			#size-cells = <0>;
 		};
 
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>, <&mmc0_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <32>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>, <&mmc1_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <33>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>, <&mmc2_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <34>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@01c12000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ahb_gates 11>, <&mmc3_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <35>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 1>, <&usb_clk 2>;
+			reset-names = "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <64>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@01c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <56>;
+			clocks = <&pll6 0>, <&ahb_gates 25>;
+			status = "disabled";
+		};
+
+		ehci1: usb@01c1c000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <40>;
+			clocks = <&ahb_gates 3>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@01c1c400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <65>;
+			clocks = <&usb_clk 7>, <&ahb_gates 4>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@01c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <50>;
+			clocks = <&ahb_gates 23>, <&spi3_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-ic";
+			compatible = "allwinner,sun4i-a10-ic";
 			reg = <0x01c20400 0x400>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -348,6 +513,20 @@
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
+			pwm0_pins_a: pwm0@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			pwm1_pins_a: pwm1@0 {
+				allwinner,pins = "PI3";
+				allwinner,function = "pwm";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
 			uart0_pins_a: uart0@0 {
 				allwinner,pins = "PB22", "PB23";
 				allwinner,function = "uart0";
@@ -400,28 +579,50 @@
 				allwinner,drive = <0>;
 				allwinner,pull = <0>;
 			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <2>;
+				allwinner,pull = <0>;
+			};
+
+			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+				allwinner,pins = "PH1";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <22>;
 			clocks = <&osc24M>;
 		};
 
 		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-wdt";
+			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
 		};
 
 		rtc: rtc@01c20d00 {
-			compatible = "allwinner,sun4i-rtc";
+			compatible = "allwinner,sun4i-a10-rtc";
 			reg = <0x01c20d00 0x20>;
 			interrupts = <24>;
 		};
 
+		pwm: pwm@01c20e00 {
+			compatible = "allwinner,sun4i-a10-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun4i-sid";
+			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;
 		};
 
@@ -512,30 +713,36 @@
 		};
 
 		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <7>;
 			clocks = <&apb1_gates 0>;
 			clock-frequency = <100000>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <8>;
 			clocks = <&apb1_gates 1>;
 			clock-frequency = <100000>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <9>;
 			clocks = <&apb1_gates 2>;
 			clock-frequency = <100000>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 3c9f8b3cd3e3..ea9519da5764 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -13,6 +13,7 @@
 
 /dts-v1/;
 /include/ "sun5i-a10s.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
 	model = "Olimex A10s-Olinuxino Micro";
@@ -34,13 +35,67 @@
 			};
 		};
 
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 6 1 0>; /* PG1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		mmc1: mmc@01c10000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 6 13 0>; /* PG13 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
 		pinctrl@01c20800 {
+			mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
+				allwinner,pins = "PG1";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
+			mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
+				allwinner,pins = "PG13";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
 			led_pins_olinuxino: led_pins@0 {
 				allwinner,pins = "PE3";
 				allwinner,function = "gpio_out";
 				allwinner,drive = <1>;
 				allwinner,pull = <0>;
 			};
+
+			usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
+				allwinner,pins = "PB10";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		uart0: serial@01c28000 {
@@ -98,4 +153,10 @@
 			default-state = "on";
 		};
 	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
+		gpio = <&pio 1 10 0>;
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
new file mode 100644
index 000000000000..43a93762d4f2
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun5i-a10s.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "R7 A10s hdmi tv-stick";
+	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 6 1 0>; /* PG1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		mmc1: mmc@01c10000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins_a>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			non-removable;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc0_cd_pin_r7: mmc0_cd_pin@0 {
+				allwinner,pins = "PG1";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
+			led_pins_r7: led_pins@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <1>;
+				allwinner,pull = <0>;
+			};
+
+			usb1_vbus_pin_r7: usb1_vbus_pin@0 {
+				allwinner,pins = "PG13";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_r7>;
+
+		green {
+			label = "r7-tv-dongle:green:usr";
+			gpios = <&pio 1 2 0>;
+			default-state = "on";
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_r7>;
+		gpio = <&pio 6 13 0>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 79fd412005b0..b64f705d9008 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -18,6 +18,10 @@
 
 	aliases {
 		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
 	};
 
 	cpus {
@@ -47,44 +51,48 @@
 			clock-frequency = <0>;
 		};
 
-		osc24M: osc24M@01c20050 {
+		osc24M: clk@01c20050 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-osc-clk";
+			compatible = "allwinner,sun4i-a10-osc-clk";
 			reg = <0x01c20050 0x4>;
 			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
 		};
 
-		osc32k: osc32k {
+		osc32k: clk@0 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
 		};
 
-		pll1: pll1@01c20000 {
+		pll1: clk@01c20000 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-pll1-clk";
+			compatible = "allwinner,sun4i-a10-pll1-clk";
 			reg = <0x01c20000 0x4>;
 			clocks = <&osc24M>;
+			clock-output-names = "pll1";
 		};
 
-		pll4: pll4@01c20018 {
+		pll4: clk@01c20018 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-pll1-clk";
+			compatible = "allwinner,sun4i-a10-pll1-clk";
 			reg = <0x01c20018 0x4>;
 			clocks = <&osc24M>;
+			clock-output-names = "pll4";
 		};
 
-		pll5: pll5@01c20020 {
+		pll5: clk@01c20020 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-pll5-clk";
+			compatible = "allwinner,sun4i-a10-pll5-clk";
 			reg = <0x01c20020 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll5_ddr", "pll5_other";
 		};
 
-		pll6: pll6@01c20028 {
+		pll6: clk@01c20028 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-pll6-clk";
+			compatible = "allwinner,sun4i-a10-pll6-clk";
 			reg = <0x01c20028 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll6_sata", "pll6_other", "pll6";
@@ -93,21 +101,23 @@
 		/* dummy is 200M */
 		cpu: cpu@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-cpu-clk";
+			compatible = "allwinner,sun4i-a10-cpu-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
 		};
 
 		axi: axi@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-axi-clk";
+			compatible = "allwinner,sun4i-a10-axi-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&cpu>;
+			clock-output-names = "axi";
 		};
 
-		axi_gates: axi_gates@01c2005c {
+		axi_gates: clk@01c2005c {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-axi-gates-clk";
+			compatible = "allwinner,sun4i-a10-axi-gates-clk";
 			reg = <0x01c2005c 0x4>;
 			clocks = <&axi>;
 			clock-output-names = "axi_dram";
@@ -115,12 +125,13 @@
 
 		ahb: ahb@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-ahb-clk";
+			compatible = "allwinner,sun4i-a10-ahb-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&axi>;
+			clock-output-names = "ahb";
 		};
 
-		ahb_gates: ahb_gates@01c20060 {
+		ahb_gates: clk@01c20060 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
@@ -136,12 +147,13 @@
 
 		apb0: apb0@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb0-clk";
+			compatible = "allwinner,sun4i-a10-apb0-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&ahb>;
+			clock-output-names = "apb0";
 		};
 
-		apb0_gates: apb0_gates@01c20068 {
+		apb0_gates: clk@01c20068 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
@@ -152,19 +164,21 @@
 
 		apb1_mux: apb1_mux@01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-mux-clk";
+			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1_mux";
 		};
 
 		apb1: apb1@01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-clk";
+			compatible = "allwinner,sun4i-a10-apb1-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&apb1_mux>;
+			clock-output-names = "apb1";
 		};
 
-		apb1_gates: apb1_gates@01c2006c {
+		apb1_gates: clk@01c2006c {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
@@ -176,7 +190,7 @@
 
 		nand_clk: clk@01c20080 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20080 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "nand";
@@ -184,7 +198,7 @@
 
 		ms_clk: clk@01c20084 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20084 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ms";
@@ -192,7 +206,7 @@
 
 		mmc0_clk: clk@01c20088 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc0";
@@ -200,7 +214,7 @@
 
 		mmc1_clk: clk@01c2008c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc1";
@@ -208,7 +222,7 @@
 
 		mmc2_clk: clk@01c20090 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc2";
@@ -216,7 +230,7 @@
 
 		ts_clk: clk@01c20098 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20098 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ts";
@@ -224,7 +238,7 @@
 
 		ss_clk: clk@01c2009c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2009c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ss";
@@ -232,7 +246,7 @@
 
 		spi0_clk: clk@01c200a0 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a0 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi0";
@@ -240,7 +254,7 @@
 
 		spi1_clk: clk@01c200a4 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a4 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi1";
@@ -248,7 +262,7 @@
 
 		spi2_clk: clk@01c200a8 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a8 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi2";
@@ -256,15 +270,24 @@
 
 		ir0_clk: clk@01c200b0 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200b0 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ir0";
 		};
 
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_phy";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2015c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mbus";
@@ -277,6 +300,28 @@
 		#size-cells = <1>;
 		ranges;
 
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		emac: ethernet@01c0b000 {
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
@@ -293,8 +338,78 @@
 			#size-cells = <0>;
 		};
 
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>, <&mmc0_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <32>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>, <&mmc1_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <33>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>, <&mmc2_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <34>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 1>;
+			reset-names = "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-ic";
+			compatible = "allwinner,sun4i-a10-ic";
 			reg = <0x01c20400 0x400>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -363,22 +478,36 @@
 				allwinner,drive = <0>;
 				allwinner,pull = <0>;
 			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <2>;
+				allwinner,pull = <0>;
+			};
+
+			mmc1_pins_a: mmc1@0 {
+				allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
+				allwinner,function = "mmc1";
+				allwinner,drive = <2>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <22>;
 			clocks = <&osc24M>;
 		};
 
 		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-wdt";
+			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
 		};
 
 		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun4i-sid";
+			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;
 		};
 
@@ -431,7 +560,7 @@
 		i2c0: i2c@01c2ac00 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <7>;
 			clocks = <&apb1_gates 0>;
@@ -442,7 +571,7 @@
 		i2c1: i2c@01c2b000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <8>;
 			clocks = <&apb1_gates 1>;
@@ -453,7 +582,7 @@
 		i2c2: i2c@01c2b400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <9>;
 			clocks = <&apb1_gates 2>;
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index fe2ce0acdb06..fa44b026483b 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -14,19 +14,57 @@
 
 /dts-v1/;
 /include/ "sun5i-a13.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
 	model = "Olimex A13-Olinuxino Micro";
 	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
 
 	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 6 0 0>; /* PG0 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
 		pinctrl@01c20800 {
+			mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
+				allwinner,pins = "PG0";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
 			led_pins_olinuxinom: led_pins@0 {
 				allwinner,pins = "PG9";
 				allwinner,function = "gpio_out";
 				allwinner,drive = <1>;
 				allwinner,pull = <0>;
 			};
+
+			usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
+				allwinner,pins = "PG11";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		uart1: serial@01c28400 {
@@ -65,4 +103,10 @@
 			default-state = "on";
 		};
 	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
+		gpio = <&pio 6 11 0>;
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index a4ba5ff010cf..429994e1943e 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -13,19 +13,57 @@
 
 /dts-v1/;
 /include/ "sun5i-a13.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
 	model = "Olimex A13-Olinuxino";
 	compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
 
 	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 6 0 0>; /* PG0 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
 		pinctrl@01c20800 {
+			mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+				allwinner,pins = "PG0";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
 			led_pins_olinuxino: led_pins@0 {
 				allwinner,pins = "PG9";
 				allwinner,function = "gpio_out";
 				allwinner,drive = <1>;
 				allwinner,pull = <0>;
 			};
+
+			usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
+				allwinner,pins = "PG11";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		uart1: serial@01c28400 {
@@ -63,4 +101,10 @@
 			default-state = "on";
 		};
 	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
+		gpio = <&pio 6 11 0>;
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index c463fd730c91..3b2a94c40f6e 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -16,6 +16,11 @@
 / {
 	interrupt-parent = <&intc>;
 
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart3;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -47,44 +52,48 @@
 			clock-frequency = <0>;
 		};
 
-		osc24M: osc24M@01c20050 {
+		osc24M: clk@01c20050 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-osc-clk";
+			compatible = "allwinner,sun4i-a10-osc-clk";
 			reg = <0x01c20050 0x4>;
 			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
 		};
 
-		osc32k: osc32k {
+		osc32k: clk@0 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
 		};
 
-		pll1: pll1@01c20000 {
+		pll1: clk@01c20000 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-pll1-clk";
+			compatible = "allwinner,sun4i-a10-pll1-clk";
 			reg = <0x01c20000 0x4>;
 			clocks = <&osc24M>;
+			clock-output-names = "pll1";
 		};
 
-		pll4: pll4@01c20018 {
+		pll4: clk@01c20018 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-pll1-clk";
+			compatible = "allwinner,sun4i-a10-pll1-clk";
 			reg = <0x01c20018 0x4>;
 			clocks = <&osc24M>;
+			clock-output-names = "pll4";
 		};
 
-		pll5: pll5@01c20020 {
+		pll5: clk@01c20020 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-pll5-clk";
+			compatible = "allwinner,sun4i-a10-pll5-clk";
 			reg = <0x01c20020 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll5_ddr", "pll5_other";
 		};
 
-		pll6: pll6@01c20028 {
+		pll6: clk@01c20028 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-pll6-clk";
+			compatible = "allwinner,sun4i-a10-pll6-clk";
 			reg = <0x01c20028 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll6_sata", "pll6_other", "pll6";
@@ -93,21 +102,23 @@
 		/* dummy is 200M */
 		cpu: cpu@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-cpu-clk";
+			compatible = "allwinner,sun4i-a10-cpu-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
 		};
 
 		axi: axi@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-axi-clk";
+			compatible = "allwinner,sun4i-a10-axi-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&cpu>;
+			clock-output-names = "axi";
 		};
 
-		axi_gates: axi_gates@01c2005c {
+		axi_gates: clk@01c2005c {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-axi-gates-clk";
+			compatible = "allwinner,sun4i-a10-axi-gates-clk";
 			reg = <0x01c2005c 0x4>;
 			clocks = <&axi>;
 			clock-output-names = "axi_dram";
@@ -115,12 +126,13 @@
 
 		ahb: ahb@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-ahb-clk";
+			compatible = "allwinner,sun4i-a10-ahb-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&axi>;
+			clock-output-names = "ahb";
 		};
 
-		ahb_gates: ahb_gates@01c20060 {
+		ahb_gates: clk@01c20060 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
@@ -135,12 +147,13 @@
 
 		apb0: apb0@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb0-clk";
+			compatible = "allwinner,sun4i-a10-apb0-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&ahb>;
+			clock-output-names = "apb0";
 		};
 
-		apb0_gates: apb0_gates@01c20068 {
+		apb0_gates: clk@01c20068 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun5i-a13-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
@@ -150,19 +163,21 @@
 
 		apb1_mux: apb1_mux@01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-mux-clk";
+			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1_mux";
 		};
 
 		apb1: apb1@01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-clk";
+			compatible = "allwinner,sun4i-a10-apb1-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&apb1_mux>;
+			clock-output-names = "apb1";
 		};
 
-		apb1_gates: apb1_gates@01c2006c {
+		apb1_gates: clk@01c2006c {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun5i-a13-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
@@ -173,7 +188,7 @@
 
 		nand_clk: clk@01c20080 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20080 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "nand";
@@ -181,7 +196,7 @@
 
 		ms_clk: clk@01c20084 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20084 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ms";
@@ -189,7 +204,7 @@
 
 		mmc0_clk: clk@01c20088 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc0";
@@ -197,7 +212,7 @@
 
 		mmc1_clk: clk@01c2008c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc1";
@@ -205,7 +220,7 @@
 
 		mmc2_clk: clk@01c20090 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc2";
@@ -213,7 +228,7 @@
 
 		ts_clk: clk@01c20098 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20098 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ts";
@@ -221,7 +236,7 @@
 
 		ss_clk: clk@01c2009c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2009c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ss";
@@ -229,7 +244,7 @@
 
 		spi0_clk: clk@01c200a0 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a0 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi0";
@@ -237,7 +252,7 @@
 
 		spi1_clk: clk@01c200a4 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a4 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi1";
@@ -245,7 +260,7 @@
 
 		spi2_clk: clk@01c200a8 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a8 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi2";
@@ -253,15 +268,24 @@
 
 		ir0_clk: clk@01c200b0 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200b0 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ir0";
 		};
 
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_phy";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2015c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mbus";
@@ -274,8 +298,91 @@
 		#size-cells = <1>;
 		ranges;
 
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>, <&mmc0_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <32>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>, <&mmc2_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <34>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 1>;
+			reset-names = "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-ic";
+			compatible = "allwinner,sun4i-a10-ic";
 			reg = <0x01c20400 0x400>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -326,22 +433,29 @@
 				allwinner,drive = <0>;
 				allwinner,pull = <0>;
 			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <2>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <22>;
 			clocks = <&osc24M>;
 		};
 
 		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-wdt";
+			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
 		};
 
 		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun4i-sid";
+			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;
 		};
 
@@ -372,30 +486,36 @@
 		};
 
 		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <7>;
 			clocks = <&apb1_gates 0>;
 			clock-frequency = <100000>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <8>;
 			clocks = <&apb1_gates 1>;
 			clock-frequency = <100000>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <9>;
 			clocks = <&apb1_gates 2>;
 			clock-frequency = <100000>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		timer@01c60000 {
diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
new file mode 100644
index 000000000000..2bbf8867362b
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2014 Boris Brezillon
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
+	compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		pio: pinctrl@01c20800 {
+			usb1_vbus_pin_a: usb1_vbus_pin@0 {
+				allwinner,pins = "PH27";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		usbphy: phy@01c19400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c1a000 {
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_a>;
+		gpio = <&pio 7 27 0>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index e5adae30899b..546cf6eff5c7 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -13,6 +13,7 @@
 
 /dts-v1/;
 /include/ "sun6i-a31.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
 	model = "WITS A31 Colombus Evaluation Board";
@@ -23,10 +24,74 @@
 	};
 
 	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
+			vmmc-supply = <&reg_vcc3v0>;
+			bus-width = <4>;
+			cd-gpios = <&pio 0 8 0>; /* PA8 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c19400 {
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1b000 {
+			status = "okay";
+		};
+
+		pio: pinctrl@01c20800 {
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pull = <1>;
+			};
+
+			mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
+				allwinner,pins = "PA8";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
+			usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
+				allwinner,pins = "PH24";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
 			status = "okay";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "fail";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_pin_colombus>;
+		gpio = <&pio 7 24 0>;
+		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
new file mode 100644
index 000000000000..bc6115da5ae1
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Mele M9 / A1000G Quad top set box";
+	compatible = "mele,m9", "allwinner,sun6i-a31";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 22 0>; /* PH22 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		pio: pinctrl@01c20800 {
+			mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+				allwinner,pins = "PH22";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 5256ad9be52c..a9dfa12eb735 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -16,7 +16,18 @@
 / {
 	interrupt-parent = <&gic>;
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+	};
+
+
 	cpus {
+		enable-method = "allwinner,sun6i-a31";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -49,6 +60,14 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+		interrupts = <0 120 4>,
+			     <0 121 4>,
+			     <0 122 4>,
+			     <0 123 4>;
+	};
+
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -60,34 +79,32 @@
 			clock-frequency = <24000000>;
 		};
 
-		osc32k: osc32k {
+		osc32k: clk@0 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
 		};
 
-		pll1: pll1@01c20000 {
+		pll1: clk@01c20000 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun6i-a31-pll1-clk";
 			reg = <0x01c20000 0x4>;
 			clocks = <&osc24M>;
+			clock-output-names = "pll1";
 		};
 
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		pll6: pll6 {
+		pll6: clk@01c20028 {
 			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
+			compatible = "allwinner,sun6i-a31-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6";
 		};
 
 		cpu: cpu@01c20050 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-cpu-clk";
+			compatible = "allwinner,sun4i-a10-cpu-clk";
 			reg = <0x01c20050 0x4>;
 
 			/*
@@ -97,13 +114,15 @@
 			 * Allwinner.
 			 */
 			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+			clock-output-names = "cpu";
 		};
 
 		axi: axi@01c20050 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-axi-clk";
+			compatible = "allwinner,sun4i-a10-axi-clk";
 			reg = <0x01c20050 0x4>;
 			clocks = <&cpu>;
+			clock-output-names = "axi";
 		};
 
 		ahb1_mux: ahb1_mux@01c20054 {
@@ -111,16 +130,18 @@
 			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
+			clock-output-names = "ahb1_mux";
 		};
 
 		ahb1: ahb1@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-ahb-clk";
+			compatible = "allwinner,sun4i-a10-ahb-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&ahb1_mux>;
+			clock-output-names = "ahb1";
 		};
 
-		ahb1_gates: ahb1_gates@01c20060 {
+		ahb1_gates: clk@01c20060 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
 			reg = <0x01c20060 0x8>;
@@ -143,12 +164,13 @@
 
 		apb1: apb1@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb0-clk";
+			compatible = "allwinner,sun4i-a10-apb0-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&ahb1>;
+			clock-output-names = "apb1";
 		};
 
-		apb1_gates: apb1_gates@01c20060 {
+		apb1_gates: clk@01c20068 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
 			reg = <0x01c20068 0x4>;
@@ -160,9 +182,10 @@
 
 		apb2_mux: apb2_mux@01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-mux-clk";
+			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+			clock-output-names = "apb2_mux";
 		};
 
 		apb2: apb2@01c20058 {
@@ -170,9 +193,10 @@
 			compatible = "allwinner,sun6i-a31-apb2-div-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&apb2_mux>;
+			clock-output-names = "apb2";
 		};
 
-		apb2_gates: apb2_gates@01c2006c {
+		apb2_gates: clk@01c2006c {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
 			reg = <0x01c2006c 0x4>;
@@ -182,6 +206,81 @@
 					"apb2_uart1", "apb2_uart2", "apb2_uart3",
 					"apb2_uart4", "apb2_uart5";
 		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "mmc0";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "mmc1";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "mmc2";
+		};
+
+		mmc3_clk: clk@01c20094 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20094 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "mmc3";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "spi2";
+		};
+
+		spi3_clk: clk@01c200ac {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200ac 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "spi3";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
+					     "usb_ohci0", "usb_ohci1",
+					     "usb_ohci2";
+		};
 	};
 
 	soc@01c00000 {
@@ -190,6 +289,136 @@
 		#size-cells = <1>;
 		ranges;
 
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun6i-a31-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <0 50 4>;
+			clocks = <&ahb1_gates 6>;
+			resets = <&ahb1_rst 6>;
+			#dma-cells = <1>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb1_gates 8>, <&mmc0_clk>;
+			clock-names = "ahb", "mmc";
+			resets = <&ahb1_rst 8>;
+			reset-names = "ahb";
+			interrupts = <0 60 4>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb1_gates 9>, <&mmc1_clk>;
+			clock-names = "ahb", "mmc";
+			resets = <&ahb1_rst 9>;
+			reset-names = "ahb";
+			interrupts = <0 61 4>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb1_gates 10>, <&mmc2_clk>;
+			clock-names = "ahb", "mmc";
+			resets = <&ahb1_rst 10>;
+			reset-names = "ahb";
+			interrupts = <0 62 4>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@01c12000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ahb1_gates 11>, <&mmc3_clk>;
+			clock-names = "ahb", "mmc";
+			resets = <&ahb1_rst 11>;
+			reset-names = "ahb";
+			interrupts = <0 63 4>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c19400 {
+			compatible = "allwinner,sun6i-a31-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&usb_clk 8>,
+				 <&usb_clk 9>,
+				 <&usb_clk 10>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy";
+			resets = <&usb_clk 0>,
+				 <&usb_clk 1>,
+				 <&usb_clk 2>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@01c1a000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <0 72 4>;
+			clocks = <&ahb1_gates 26>;
+			resets = <&ahb1_rst 26>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c1a400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <0 73 4>;
+			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
+			resets = <&ahb1_rst 29>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@01c1b000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <0 74 4>;
+			clocks = <&ahb1_gates 27>;
+			resets = <&ahb1_rst 27>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@01c1b400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <0 75 4>;
+			clocks = <&ahb1_gates 30>, <&usb_clk 17>;
+			resets = <&ahb1_rst 30>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@01c1c400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <0 77 4>;
+			clocks = <&ahb1_gates 31>, <&usb_clk 18>;
+			resets = <&ahb1_rst 31>;
+			status = "disabled";
+		};
+
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
@@ -210,6 +439,34 @@
 				allwinner,drive = <0>;
 				allwinner,pull = <0>;
 			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PH14", "PH15";
+				allwinner,function = "i2c0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PH16", "PH17";
+				allwinner,function = "i2c1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PH18", "PH19";
+				allwinner,function = "i2c2";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <2>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		ahb1_rst: reset@01c202c0 {
@@ -231,7 +488,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0xa0>;
 			interrupts = <0 18 4>,
 				     <0 19 4>,
@@ -242,7 +499,7 @@
 		};
 
 		wdt1: watchdog@01c20ca0 {
-			compatible = "allwinner,sun6i-wdt";
+			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
 		};
 
@@ -254,6 +511,8 @@
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 16>;
 			resets = <&apb2_rst 16>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -265,6 +524,8 @@
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 17>;
 			resets = <&apb2_rst 17>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -276,6 +537,8 @@
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 18>;
 			resets = <&apb2_rst 18>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -287,6 +550,8 @@
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 19>;
 			resets = <&apb2_rst 19>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -298,6 +563,8 @@
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 20>;
 			resets = <&apb2_rst 20>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -309,6 +576,107 @@
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 21>;
 			resets = <&apb2_rst 21>;
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <0 6 4>;
+			clocks = <&apb2_gates 0>;
+			clock-frequency = <100000>;
+			resets = <&apb2_rst 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <0 7 4>;
+			clocks = <&apb2_gates 1>;
+			clock-frequency = <100000>;
+			resets = <&apb2_rst 1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <0 8 4>;
+			clocks = <&apb2_gates 2>;
+			clock-frequency = <100000>;
+			resets = <&apb2_rst 2>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@01c2b800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <0 9 4>;
+			clocks = <&apb2_gates 3>;
+			clock-frequency = <100000>;
+			resets = <&apb2_rst 3>;
+			status = "disabled";
+		};
+
+		timer@01c60000 {
+			compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <0 51 4>,
+				     <0 52 4>,
+				     <0 53 4>,
+				     <0 54 4>;
+			clocks = <&ahb1_gates 19>;
+			resets = <&ahb1_rst 19>;
+		};
+
+		spi0: spi@01c68000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <0 65 4>;
+			clocks = <&ahb1_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ahb1_rst 20>;
+			status = "disabled";
+		};
+
+		spi1: spi@01c69000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <0 66 4>;
+			clocks = <&ahb1_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			resets = <&ahb1_rst 21>;
+			status = "disabled";
+		};
+
+		spi2: spi@01c6a000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6a000 0x1000>;
+			interrupts = <0 67 4>;
+			clocks = <&ahb1_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 25>, <&dma 25>;
+			dma-names = "rx", "tx";
+			resets = <&ahb1_rst 22>;
+			status = "disabled";
+		};
+
+		spi3: spi@01c6b000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6b000 0x1000>;
+			interrupts = <0 68 4>;
+			clocks = <&ahb1_gates 23>, <&spi3_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 26>, <&dma 26>;
+			dma-names = "rx", "tx";
+			resets = <&ahb1_rst 23>;
 			status = "disabled";
 		};
 
@@ -323,14 +691,74 @@
 			interrupts = <1 9 0xf04>;
 		};
 
+		nmi_intc: interrupt-controller@01f00c0c {
+			compatible = "allwinner,sun6i-a31-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c0c 0x38>;
+			interrupts = <0 32 4>;
+		};
+
+		prcm@01f01400 {
+			compatible = "allwinner,sun6i-a31-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "allwinner,sun6i-a31-ar100-clk";
+				#clock-cells = <0>;
+				clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun6i-a31-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_ir",
+						"apb0_timer", "apb0_p2wi",
+						"apb0_uart", "apb0_1wire",
+						"apb0_i2c";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+		};
+
 		cpucfg@01f01c00 {
 			compatible = "allwinner,sun6i-a31-cpuconfig";
 			reg = <0x01f01c00 0x300>;
 		};
 
-		prcm@01f01c00 {
-			compatible = "allwinner,sun6i-a31-prcm";
-			reg = <0x01f01400 0x200>;
+		r_pio: pinctrl@01f02c00 {
+			compatible = "allwinner,sun6i-a31-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <0 45 4>,
+				     <0 46 4>;
+			clocks = <&apb0_gates 0>;
+			resets = <&apb0_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 5c51cb8a98b0..a5ad945197e8 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -13,25 +13,48 @@
 
 /dts-v1/;
 /include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
 	model = "Cubietech Cubieboard2";
 	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
 
 	soc@01c00000 {
-		emac: ethernet@01c0b000 {
+		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
 			status = "okay";
 		};
 
-		mdio@01c0b080 {
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
 			status = "okay";
+		};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
 		};
 
 		pinctrl@01c20800 {
@@ -60,6 +83,18 @@
 			pinctrl-0 = <&i2c1_pins_a>;
 			status = "okay";
 		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
 	};
 
 	leds {
@@ -77,4 +112,16 @@
 			gpios = <&pio 7 20 0>;
 		};
 	};
+
+	reg_ahci_5v: ahci-5v {
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index f9dcb61a5305..b87fea901489 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -13,13 +13,79 @@
 
 /dts-v1/;
 /include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
 	model = "Cubietech Cubietruck";
 	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
 
 	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		mmc3: mmc@01c12000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc3_pins_a>;
+			vmmc-supply = <&reg_vmmc3>;
+			bus-width = <4>;
+			non-removable;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
 		pinctrl@01c20800 {
+			mmc3_pins_a: mmc3@0 {
+				/* AP6210 requires pull-up */
+				allwinner,pull = <1>;
+			};
+
+			vmmc3_pin_cubietruck: vmmc3_pin@0 {
+				allwinner,pins = "PH9";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+				allwinner,pins = "PH12";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
 			led_pins_cubietruck: led_pins@0 {
 				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
 				allwinner,function = "gpio_out";
@@ -28,6 +94,12 @@
 			};
 		};
 
+		pwm: pwm@01c20e00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+			status = "okay";
+		};
+
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
@@ -51,6 +123,18 @@
 			pinctrl-0 = <&i2c2_pins_a>;
 			status = "okay";
 		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_rgmii_a>;
+			phy = <&phy1>;
+			phy-mode = "rgmii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
 	};
 
 	leds {
@@ -78,4 +162,29 @@
 			gpios = <&pio 7 7 0>;
 		};
 	};
+
+	reg_ahci_5v: ahci-5v {
+		pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
+		gpio = <&pio 7 12 0>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_pin_cubietruck>;
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 9 0>;
+	};
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
new file mode 100644
index 000000000000..b77308e90199
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -0,0 +1,176 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "I12 / Q5 / QT840A A20 tvbox";
+	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		mmc3: mmc@01c12000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc3_pins_a>;
+			vmmc-supply = <&reg_vmmc3>;
+			bus-width = <4>;
+			non-removable;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc3_pins_a: mmc3@0 {
+				/* AP6210 / AP6330 requires pull-up */
+				allwinner,pull = <1>;
+			};
+
+			vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
+				allwinner,pins = "PH12";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
+				allwinner,pins = "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			led_pins_i12_tvbox: led_pins@0 {
+				allwinner,pins = "PH9", "PH20";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			phy-supply = <&reg_gmac_3v3>;
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_i12_tvbox>;
+
+		red {
+			label = "i12_tvbox:red:usr";
+			gpios = <&pio 7 9 1>;
+		};
+
+		blue {
+			label = "i12_tvbox:blue:usr";
+			gpios = <&pio 7 20 0>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 2 0>;
+	};
+
+	reg_vmmc3_io: vmmc3-io {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
+		regulator-name = "vmmc3-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* This controls VCC-PI, must be always on! */
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 7 12 0>;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		enable-active-high;
+		gpio = <&pio 7 21 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index ead3013f9aca..b759630bc9a9 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -13,28 +13,85 @@
 
 /dts-v1/;
 /include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
 	model = "Olimex A20-Olinuxino Micro";
 	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
 
+	aliases {
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
 	soc@01c00000 {
-		emac: ethernet@01c0b000 {
+		spi1: spi@01c06000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
+			pinctrl-0 = <&spi1_pins_a>;
 			status = "okay";
 		};
 
-		mdio@01c0b080 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
 			status = "okay";
+		};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
+		mmc3: mmc@01c12000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 11 0>; /* PH11 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		spi2: spi@01c17000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_pins_a>;
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
 		};
 
 		pinctrl@01c20800 {
+			mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
+				allwinner,pins = "PH11";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
 			led_pins_olinuxino: led_pins@0 {
 				allwinner,pins = "PH2";
 				allwinner,function = "gpio_out";
@@ -78,6 +135,18 @@
 			pinctrl-0 = <&i2c2_pins_a>;
 			status = "okay";
 		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
 	};
 
 	leds {
@@ -91,4 +160,16 @@
 			default-state = "on";
 		};
 	};
+
+	reg_ahci_5v: ahci-5v {
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 6f25cf559ad0..01e94664232a 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -17,7 +17,15 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
-		ethernet0 = &emac;
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial7 = &uart7;
 	};
 
 	cpus {
@@ -41,16 +49,31 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+		interrupts = <0 120 4>,
+			     <0 121 4>;
+	};
+
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M@01c20050 {
+		osc24M: clk@01c20050 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-osc-clk";
+			compatible = "allwinner,sun4i-a10-osc-clk";
 			reg = <0x01c20050 0x4>;
 			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
 		};
 
 		osc32k: clk@0 {
@@ -60,58 +83,71 @@
 			clock-output-names = "osc32k";
 		};
 
-		pll1: pll1@01c20000 {
+		pll1: clk@01c20000 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-pll1-clk";
+			compatible = "allwinner,sun4i-a10-pll1-clk";
 			reg = <0x01c20000 0x4>;
 			clocks = <&osc24M>;
+			clock-output-names = "pll1";
 		};
 
-		pll4: pll4@01c20018 {
+		pll4: clk@01c20018 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-pll1-clk";
+			compatible = "allwinner,sun7i-a20-pll4-clk";
 			reg = <0x01c20018 0x4>;
 			clocks = <&osc24M>;
+			clock-output-names = "pll4";
 		};
 
-		pll5: pll5@01c20020 {
+		pll5: clk@01c20020 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-pll5-clk";
+			compatible = "allwinner,sun4i-a10-pll5-clk";
 			reg = <0x01c20020 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll5_ddr", "pll5_other";
 		};
 
-		pll6: pll6@01c20028 {
+		pll6: clk@01c20028 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-pll6-clk";
+			compatible = "allwinner,sun4i-a10-pll6-clk";
 			reg = <0x01c20028 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll6_sata", "pll6_other", "pll6";
 		};
 
+		pll8: clk@01c20040 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-pll4-clk";
+			reg = <0x01c20040 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll8";
+		};
+
 		cpu: cpu@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-cpu-clk";
+			compatible = "allwinner,sun4i-a10-cpu-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
+			clock-output-names = "cpu";
 		};
 
 		axi: axi@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-axi-clk";
+			compatible = "allwinner,sun4i-a10-axi-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&cpu>;
+			clock-output-names = "axi";
 		};
 
 		ahb: ahb@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-ahb-clk";
+			compatible = "allwinner,sun4i-a10-ahb-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&axi>;
+			clock-output-names = "ahb";
 		};
 
-		ahb_gates: ahb_gates@01c20060 {
+		ahb_gates: clk@01c20060 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun7i-a20-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
@@ -133,12 +169,13 @@
 
 		apb0: apb0@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb0-clk";
+			compatible = "allwinner,sun4i-a10-apb0-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&ahb>;
+			clock-output-names = "apb0";
 		};
 
-		apb0_gates: apb0_gates@01c20068 {
+		apb0_gates: clk@01c20068 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun7i-a20-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
@@ -151,19 +188,21 @@
 
 		apb1_mux: apb1_mux@01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-mux-clk";
+			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1_mux";
 		};
 
 		apb1: apb1@01c20058 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-apb1-clk";
+			compatible = "allwinner,sun4i-a10-apb1-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&apb1_mux>;
+			clock-output-names = "apb1";
 		};
 
-		apb1_gates: apb1_gates@01c2006c {
+		apb1_gates: clk@01c2006c {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun7i-a20-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
@@ -178,7 +217,7 @@
 
 		nand_clk: clk@01c20080 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20080 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "nand";
@@ -186,7 +225,7 @@
 
 		ms_clk: clk@01c20084 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20084 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ms";
@@ -194,7 +233,7 @@
 
 		mmc0_clk: clk@01c20088 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc0";
@@ -202,7 +241,7 @@
 
 		mmc1_clk: clk@01c2008c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc1";
@@ -210,7 +249,7 @@
 
 		mmc2_clk: clk@01c20090 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc2";
@@ -218,7 +257,7 @@
 
 		mmc3_clk: clk@01c20094 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20094 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "mmc3";
@@ -226,7 +265,7 @@
 
 		ts_clk: clk@01c20098 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c20098 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ts";
@@ -234,7 +273,7 @@
 
 		ss_clk: clk@01c2009c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2009c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ss";
@@ -242,7 +281,7 @@
 
 		spi0_clk: clk@01c200a0 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a0 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi0";
@@ -250,7 +289,7 @@
 
 		spi1_clk: clk@01c200a4 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a4 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi1";
@@ -258,7 +297,7 @@
 
 		spi2_clk: clk@01c200a8 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200a8 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi2";
@@ -266,7 +305,7 @@
 
 		pata_clk: clk@01c200ac {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200ac 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "pata";
@@ -274,7 +313,7 @@
 
 		ir0_clk: clk@01c200b0 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200b0 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ir0";
@@ -282,15 +321,24 @@
 
 		ir1_clk: clk@01c200b4 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200b4 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "ir1";
 		};
 
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+		};
+
 		spi3_clk: clk@01c200d4 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c200d4 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi3";
@@ -298,13 +346,41 @@
 
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-mod0-clk";
+			compatible = "allwinner,sun4i-a10-mod0-clk";
 			reg = <0x01c2015c 0x4>;
 			clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
 			clock-output-names = "mbus";
 		};
 
 		/*
+		 * The following two are dummy clocks, placeholders used in the gmac_tx
+		 * clock. The gmac driver will choose one parent depending on the PHY
+		 * interface mode, using clk_set_rate auto-reparenting.
+		 * The actual TX clock rate is not controlled by the gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk@2 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk@3 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@01c20164 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c20164 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+
+		/*
 		 * Dummy clock used by output clocks
 		 */
 		osc24M_32k: clk@1 {
@@ -339,6 +415,36 @@
 		#size-cells = <1>;
 		ranges;
 
+		nmi_intc: interrupt-controller@01c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <0 0 4>;
+		};
+
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <0 10 4>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <0 11 4>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		emac: ethernet@01c0b000 {
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
@@ -355,6 +461,124 @@
 			#size-cells = <0>;
 		};
 
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>, <&mmc0_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <0 32 4>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>, <&mmc1_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <0 33 4>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>, <&mmc2_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <0 34 4>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@01c12000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ahb_gates 11>, <&mmc3_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <0 35 4>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun7i-a20-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 1>, <&usb_clk 2>;
+			reset-names = "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <0 39 4>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <0 64 4>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <0 12 4>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@01c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <0 56 4>;
+			clocks = <&pll6 0>, <&ahb_gates 25>;
+			status = "disabled";
+		};
+
+		ehci1: usb@01c1c000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <0 40 4>;
+			clocks = <&ahb_gates 3>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@01c1c400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <0 65 4>;
+			clocks = <&usb_clk 7>, <&ahb_gates 4>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@01c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <0 50 4>;
+			clocks = <&ahb_gates 23>, <&spi3_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun7i-a20-pinctrl";
 			reg = <0x01c20800 0x400>;
@@ -366,6 +590,20 @@
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
+			pwm0_pins_a: pwm0@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			pwm1_pins_a: pwm1@0 {
+				allwinner,pins = "PI3";
+				allwinner,function = "pwm";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
 			uart0_pins_a: uart0@0 {
 				allwinner,pins = "PB22", "PB23";
 				allwinner,function = "uart0";
@@ -373,6 +611,13 @@
 				allwinner,pull = <0>;
 			};
 
+			uart2_pins_a: uart2@0 {
+				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,function = "uart2";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
 			uart6_pins_a: uart6@0 {
 				allwinner,pins = "PI12", "PI13";
 				allwinner,function = "uart6";
@@ -432,10 +677,71 @@
 				allwinner,drive = <0>;
 				allwinner,pull = <0>;
 			};
+
+			gmac_pins_mii_a: gmac_mii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "gmac";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			gmac_pins_rgmii_a: gmac_rgmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA10",
+						"PA11", "PA12", "PA13",
+						"PA15", "PA16";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				allwinner,drive = <3>;
+				allwinner,pull = <0>;
+			};
+
+			spi1_pins_a: spi1@0 {
+				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,function = "spi1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			spi2_pins_a: spi2@0 {
+				allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+				allwinner,function = "spi2";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <2>;
+				allwinner,pull = <0>;
+			};
+
+			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+				allwinner,pins = "PH1";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
+			mmc3_pins_a: mmc3@0 {
+				allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+				allwinner,function = "mmc3";
+				allwinner,drive = <2>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <0 22 4>,
 				     <0 23 4>,
@@ -447,7 +753,7 @@
 		};
 
 		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-wdt";
+			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
 		};
 
@@ -457,6 +763,14 @@
 			interrupts = <0 24 4>;
 		};
 
+		pwm: pwm@01c20e00 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun7i-a20-sid";
 			reg = <0x01c23800 0x200>;
@@ -549,48 +863,73 @@
 		};
 
 		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <0 7 4>;
 			clocks = <&apb1_gates 0>;
 			clock-frequency = <100000>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <0 8 4>;
 			clocks = <&apb1_gates 1>;
 			clock-frequency = <100000>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <0 9 4>;
 			clocks = <&apb1_gates 2>;
 			clock-frequency = <100000>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c3: i2c@01c2b800 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b800 0x400>;
 			interrupts = <0 88 4>;
 			clocks = <&apb1_gates 3>;
 			clock-frequency = <100000>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		i2c4: i2c@01c2bc00 {
-			compatible = "allwinner,sun4i-i2c";
-			reg = <0x01c2bc00 0x400>;
+		i2c4: i2c@01c2c000 {
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2c000 0x400>;
 			interrupts = <0 89 4>;
 			clocks = <&apb1_gates 15>;
 			clock-frequency = <100000>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gmac: ethernet@01c50000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c50000 0x10000>;
+			interrupts = <0 85 4>;
+			interrupt-names = "macirq";
+			clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		hstimer@01c60000 {
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
new file mode 100644
index 000000000000..3d021efd1a38
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -0,0 +1,89 @@
+/*
+ * sunxi boards common regulator (ahci target power supply, usb-vbus) code
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	soc@01c00000 {
+		pio: pinctrl@01c20800 {
+			ahci_pwr_pin_a: ahci_pwr_pin@0 {
+				allwinner,pins = "PB8";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			usb1_vbus_pin_a: usb1_vbus_pin@0 {
+				allwinner,pins = "PH6";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			usb2_vbus_pin_a: usb2_vbus_pin@0 {
+				allwinner,pins = "PH3";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ahci_pwr_pin_a>;
+		regulator-name = "ahci-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 1 8 0>;
+		status = "disabled";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_vbus_pin_a>;
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 6 0>;
+		status = "disabled";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_pin_a>;
+		regulator-name = "usb2-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 3 0>;
+		status = "disabled";
+	};
+
+	reg_vcc3v0: vcc3v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 73aecfb57ccb..5c21d216515a 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1,3 +1,8 @@
+/*
+ * This dts file supports Dalmore A04.
+ * Other board revisions are not supported
+ */
+
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
@@ -20,6 +25,7 @@
 		hdmi@54280000 {
 			status = "okay";
 
+			hdmi-supply = <&vdd_5v0_hdmi>;
 			vdd-supply = <&vdd_hdmi_reg>;
 			pll-supply = <&palmas_smps3_reg>;
 
@@ -31,6 +37,8 @@
 		dsi@54300000 {
 			status = "okay";
 
+			avdd-dsi-csi-supply = <&avdd_1v2_reg>;
+
 			panel@0 {
 				compatible = "panasonic,vvx10f004b00",
 					     "simple-panel";
@@ -715,7 +723,6 @@
 				nvidia,pins = "drive_sdio1";
 				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
 				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
 				nvidia,pull-down-strength = <36>;
 				nvidia,pull-up-strength = <20>;
 				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
@@ -725,7 +732,6 @@
 				nvidia,pins = "drive_sdio3";
 				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
 				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
 				nvidia,pull-down-strength = <22>;
 				nvidia,pull-up-strength = <36>;
 				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
@@ -735,12 +741,10 @@
 				nvidia,pins = "drive_gma";
 				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
 				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
 				nvidia,pull-down-strength = <2>;
 				nvidia,pull-up-strength = <1>;
 				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
 				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,drive-type = <1>;
 			};
 		};
 	};
@@ -981,12 +985,10 @@
 						regulator-max-microvolt = <2800000>;
 					};
 
-					ldo3 {
+					avdd_1v2_reg: ldo3 {
 						regulator-name = "avdd-dsi-csi";
 						regulator-min-microvolt = <1200000>;
 						regulator-max-microvolt = <1200000>;
-						regulator-always-on;
-						regulator-boot-on;
 					};
 
 					ldo4 {
@@ -1104,6 +1106,7 @@
 
 	sdhci@78000400 {
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
 		bus-width = <4>;
 		status = "okay";
 	};
@@ -1230,8 +1233,6 @@
 			regulator-name = "vdd_hdmi_5v0";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
 			vin-supply = <&tps65090_dcdc1_reg>;
 		};
 
@@ -1244,6 +1245,17 @@
 			enable-active-high;
 			gpio = <&palmas_gpio 6 0>;
 		};
+
+		vdd_5v0_hdmi: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "VDD_5V0_HDMI_CON";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&tps65090_dcdc1_reg>;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
new file mode 100644
index 000000000000..0b0e8e07d965
--- /dev/null
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -0,0 +1,1113 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "NVIDIA SHIELD";
+	compatible = "nvidia,roth", "nvidia,tegra114";
+
+	chosen {
+		/* SHIELD's bootloader's arguments need to be overridden */
+		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:1";
+		/* SHIELD's bootloader will place initrd at this address */
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory {
+		/* memory >= 0x79600000 is reserved for firmware usage */
+		reg = <0x80000000 0x79600000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2",
+						"dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+						"dap2_fs_pa2",
+						"dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_fs_pp4",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+						"dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0",
+						"pbb0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5",
+						"gmi_wr_n_pi0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6",
+						"gmi_ad7_pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs6_n_pi13 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2",
+						"gmi_oe_n_pi1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_cd_n_pv2",
+						"sdmmc3_clk_lb_out_pee4",
+						"sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2",
+						"kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs0_n_pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4",
+						"gpio_x5_aud_px5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+						"pbb5",
+						"pbb6",
+						"pbb7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1",
+						"pcc2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad12_ph4",
+						"gmi_ad15_ph7",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3",
+						"gmi_ad13_ph5",
+						"gmi_ad8_ph0",
+						"gmi_clk_pk1",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad14_ph6 {
+				nvidia,pins = "gmi_ad14_ph6",
+						"gmi_cs0_n_pj0",
+						"gmi_cs4_n_pk2",
+						"gmi_cs7_n_pi6",
+						"gmi_dqs_p_pj3",
+						"gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2",
+						"gmi_ad3_pg3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3",
+						"kb_row4_pr4",
+						"kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,drive-type = <1>;
+			};
+		};
+	};
+
+	/* Usable on reworked devices only */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		regulator@43 {
+			compatible = "ti,tps51632";
+			reg = <0x43>;
+			regulator-name = "vdd-cpu";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		palmas: pmic@58 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				regulators {
+					smps12 {
+						regulator-name = "vdd-ddr";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1500000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8: smps3 {
+						regulator-name = "vdd-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps457 {
+						regulator-name = "vdd-soc";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps8 {
+						regulator-name = "avdd-pll-1v05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps9 {
+						regulator-name = "vdd-2v85-emmc";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+					};
+
+					smps10_out1 {
+						regulator-name = "vdd-fan";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps10_out2 {
+						regulator-name = "vdd-5v0-sys";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo2 {
+						regulator-name = "vdd-2v8-display";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "avdd-1v2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo5 {
+						regulator-name = "avdd-hdmi-pll";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					ldo6 {
+						regulator-name = "vdd-sensor-2v8";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					vddio_sdmmc3: ldo9 {
+						regulator-name = "vddio-sdmmc3";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_3v3_sys: regen1 {
+						regulator-name = "rail-3v3";
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen2 {
+						regulator-name = "rail-5v0";
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* SD card */
+	sdhci@78000400 {
+		status = "okay";
+		bus-width = <4>;
+		vmmc-supply = <&vddio_sdmmc3>;
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	/* eMMC */
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vdd_1v8>;
+		non-removable;
+	};
+
+	/* External USB port (must be powered) */
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		/* Should be changed to "otg" once we have vbus_supply */
+		/* As of now, USB devices need to be powered externally */
+		dr_mode = "host";
+	};
+
+	/* SHIELD controller */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 40000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&lcd_bl_en>;
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		back {
+			label = "Back";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		lcd_bl_en: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "lcd_bl_en";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_lcd_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			vin-supply = <&vdd_1v8>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			regulator-boot-on;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v8_ts";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
+			regulator-boot-on;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_3v3_ts";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+			regulator-boot-on;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_1v8_com";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			vin-supply = <&vdd_1v8>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+			regulator-boot-on;
+		};
+
+		regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vdd_3v3_com";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_sys>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
new file mode 100644
index 000000000000..963662145635
--- /dev/null
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -0,0 +1,348 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "Tegra Note 7";
+	compatible = "nvidia,tn7", "nvidia,tegra114";
+
+	chosen {
+		/* TN7's bootloader's arguments need to be overridden */
+		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2";
+		/* TN7's bootloader will place initrd at this address */
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory {
+		/* memory >= 0x37e00000 is reserved for firmware usage */
+		reg = <0x80000000 0x37e00000>;
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_1v2_ap>;
+
+			panel@0 {
+				compatible = "lg,ld070wx3-sl01";
+				reg = <0>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		palmas: pmic@58 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				ldoln-in-supply = <&vdd_smps10_out2>;
+
+				regulators {
+					smps123 {
+						regulator-name = "vd-cpu";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps45 {
+						regulator-name = "vd-soc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps6 {
+						regulator-name = "va-lcd-hv";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps7 {
+						regulator-name = "vd-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8: smps8 {
+						regulator-name = "vs-pmu-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_2v9_sys: smps9 {
+						regulator-name = "vs-sys-2v9";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out1: smps10_out1 {
+						regulator-name = "vd-smps10-out1";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out2: smps10_out2 {
+						regulator-name = "vd-smps10-out2";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo1 {
+						regulator-name = "va-pllx";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v2_ap: ldo2 {
+						regulator-name = "va-ap-1v2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "vd-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vd-ts-hv";
+						regulator-min-microvolt = <3200000>;
+						regulator-max-microvolt = <3200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo5 {
+						regulator-name = "va-cam2-hv";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					ldo6 {
+						regulator-name = "va-sns-hv";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo7 {
+						regulator-name = "va-cam1-hv";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					ldo8 {
+						regulator-name = "va-ap-rtc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						ti,enable-ldo8-tracking;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo9 {
+						regulator-name = "vi-sdcard";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldoln {
+						regulator-name = "va-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* eMMC */
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vdd_1v8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		/* Should be changed to "otg" once we have vbus_supply */
+		/* As of now, USB devices need to be powered externally */
+		dr_mode = "host";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 40000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&lcd_bl_en>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		volume_down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume_up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* FIXME: output of BQ24192 */
+		vs_sys: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VS_SYS";
+			regulator-min-microvolt = <4200000>;
+			regulator-max-microvolt = <4200000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		lcd_bl_en: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "VDD_LCD_BL";
+			regulator-min-microvolt = <16500000>;
+			regulator-max-microvolt = <16500000>;
+			gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vs_sys>;
+			regulator-boot-on;
+		};
+
+		vdd_lcd: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "VD_LCD_1V8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_1v8>;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 44ec401ec366..fdc559ab2db3 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -604,7 +604,7 @@
 		clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
 	sdhci@78000200 {
@@ -614,7 +614,7 @@
 		clocks = <&tegra_car TEGRA114_CLK_SDMMC2>;
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
 	sdhci@78000400 {
@@ -624,7 +624,7 @@
 		clocks = <&tegra_car TEGRA114_CLK_SDMMC3>;
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
 	sdhci@78000600 {
@@ -634,7 +634,7 @@
 		clocks = <&tegra_car TEGRA114_CLK_SDMMC4>;
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
 	usb@7d000000 {
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
new file mode 100644
index 000000000000..e31fb61a81d3
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -0,0 +1,1827 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+	model = "NVIDIA Tegra124 Jetson TK1";
+	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@0,7000d000/pmic@40";
+		rtc1 = "/rtc@0,7000e000";
+	};
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	host1x@0,50000000 {
+		hdmi@0,54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			vdd-supply = <&vdd_3v3_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux: pinmux@0,70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb1 {
+				nvidia,pins = "pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pc7 {
+				nvidia,pins = "pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg0 {
+				nvidia,pins = "pg0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg1 {
+				nvidia,pins = "pg1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg2 {
+				nvidia,pins = "pg2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg3 {
+				nvidia,pins = "pg3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 {
+				nvidia,pins = "ph4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph5 {
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 {
+				nvidia,pins = "pi0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi1 {
+				nvidia,pins = "pi1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi2 {
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 {
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi7 {
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "sys";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "displaya_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row16_pt0 {
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row17_pt1 {
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cd_n_pv2 {
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vimclk2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_req_pee2 {
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_out_pee4 {
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_in_pee5 {
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd_pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en2_pff1 {
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	/* DB9 serial port */
+	serial@0,70006300 {
+		status = "okay";
+	};
+
+	/* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
+	i2c@0,7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		rt5639: audio-codec@1c {
+			compatible = "realtek,rt5639";
+			reg = <0x1c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+			realtek,ldo1-en-gpios =
+				<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		eeprom@56 {
+			compatible = "atmel,24c02";
+			reg = <0x56>;
+			pagesize = <8>;
+		};
+	};
+
+	/* Expansion GEN2_I2C_* */
+	i2c@0,7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion CAM_I2C_* */
+	i2c@0,7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* HDMI DDC */
+	hdmi_ddc: i2c@0,7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion PWR_I2C_*, on-board components */
+	i2c@0,7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1_2_4_7 {
+					pins = "gpio1", "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_5_6 {
+					pins = "gpio3", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,external-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <2500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,external-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,external-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.05V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				ldo4 {
+					regulator-name = "+2.8V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+3.3V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	/* Expansion TS_SPI_* */
+	spi@0,7000d400 {
+		status = "okay";
+	};
+
+	/* Internal SPI */
+	spi@0,7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q32dw";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@0,7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	/* SD card */
+	sdhci@0,700b0400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* eMMC */
+	sdhci@0,700b0600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	ahub@0,70300000 {
+		i2s@0,70301100 {
+			status = "okay";
+		};
+	};
+
+	/* mini-PCIe USB */
+	usb@0,7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d004000 {
+		status = "okay";
+	};
+
+	/* USB A connector */
+	usb@0,7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb3_vbus>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_mux: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+VDD_MUX";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_5v0_sys: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+5V_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_sys: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "+3.3V_SYS";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_run: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "+3.3V_RUN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_3v3_hdmi: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_usb1_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "+USB0_VBUS_SW";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb3_vbus: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "+5V_USB_HS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_3v3_lp0: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "+3.3V_LP0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_hdmi_pll: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_1v05_run>;
+		};
+
+		vdd_5v0_hdmi: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "+5V_HDMI_CON";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-jetson-tk1",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "NVIDIA Tegra Jetson TK1";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5639>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index c6dcef513e5d..f0bb84244025 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -8,15 +8,41 @@
 	compatible = "nvidia,venice2", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@7000d000/as3722@40";
-		rtc1 = "/rtc@7000e000";
+		rtc0 = "/i2c@0,7000d000/pmic@40";
+		rtc1 = "/rtc@0,7000e000";
 	};
 
 	memory {
-		reg = <0x80000000 0x80000000>;
+		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	pinmux: pinmux@70000868 {
+	host1x@0,50000000 {
+		hdmi@0,54280000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_3v3_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			hdmi-supply = <&vdd_5v0_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		sor@0,54540000 {
+			status = "okay";
+
+			nvidia,dpaux = <&dpaux>;
+			nvidia,panel = <&panel>;
+		};
+
+		dpaux: dpaux@0,545c0000 {
+			vdd-supply = <&vdd_3v3_panel>;
+			status = "okay";
+		};
+	};
+
+	pinmux: pinmux@0,70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
@@ -138,14 +164,9 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0",
-					      "sdmmc1_cmd_pz1",
-					      "sdmmc1_dat0_py7",
-					      "sdmmc1_dat1_py6",
-					      "sdmmc1_dat2_py5",
-					      "sdmmc1_dat3_py4";
+				nvidia,pins = "sdmmc1_clk_pz0";
 				nvidia,function = "sdmmc1";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -402,19 +423,11 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 			usb_vbus_en0_pn4 {
-				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,pins = "usb_vbus_en0_pn4",
+					      "usb_vbus_en1_pn5";
 				nvidia,function = "usb";
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			usb_vbus_en1_pn5 {
-				nvidia,pins = "usb_vbus_en1_pn5";
-				nvidia,function = "usb";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,lock = <TEGRA_PIN_DISABLE>;
 				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
@@ -423,7 +436,6 @@
 				nvidia,pins = "drive_sdio1";
 				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
 				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
 				nvidia,pull-down-strength = <32>;
 				nvidia,pull-up-strength = <42>;
 				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
@@ -433,7 +445,6 @@
 				nvidia,pins = "drive_sdio3";
 				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
 				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
 				nvidia,pull-down-strength = <20>;
 				nvidia,pull-up-strength = <36>;
 				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
@@ -572,15 +583,15 @@
 		};
 	};
 
-	serial@70006000 {
+	serial@0,70006000 {
 		status = "okay";
 	};
 
-	pwm: pwm@7000a000 {
+	pwm: pwm@0,7000a000 {
 		status = "okay";
 	};
 
-	i2c@7000c000 {
+	i2c@0,7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -592,30 +603,32 @@
 		};
 	};
 
-	i2c@7000c400 {
+	i2c@0,7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@7000c500 {
+	i2c@0,7000c500 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@7000c700 {
+	hdmi_ddc: i2c@0,7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@7000d000 {
+	i2c@0,7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
-		as3722: as3722@40 {
+		pmic: pmic@40 {
 			compatible = "ams,as3722";
 			reg = <0x40>;
 			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 
+			ams,system-power-controller;
+
 			#interrupt-cells = <2>;
 			interrupt-controller;
 
@@ -650,19 +663,19 @@
 			};
 
 			regulators {
-				vsup-sd2-supply = <&vdd_ac_bat_reg>;
-				vsup-sd3-supply = <&vdd_ac_bat_reg>;
-				vsup-sd4-supply = <&vdd_ac_bat_reg>;
-				vsup-sd5-supply = <&vdd_ac_bat_reg>;
-				vin-ldo0-supply = <&as3722_sd2>;
-				vin-ldo1-6-supply = <&vdd_ac_bat_reg>;
-				vin-ldo2-5-7-supply = <&as3722_sd5>;
-				vin-ldo3-4-supply = <&vdd_ac_bat_reg>;
-				vin-ldo9-10-supply = <&vdd_ac_bat_reg>;
-				vin-ldo11-supply = <&vdd_ac_bat_reg>;
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
 
 				sd0 {
-					regulator-name = "vdd-cpu";
+					regulator-name = "+VDD_CPU_AP";
 					regulator-min-microvolt = <700000>;
 					regulator-max-microvolt = <1400000>;
 					regulator-min-microamp = <3500000>;
@@ -673,7 +686,7 @@
 				};
 
 				sd1 {
-					regulator-name = "vdd-core";
+					regulator-name = "+VDD_CORE";
 					regulator-min-microvolt = <700000>;
 					regulator-max-microvolt = <1350000>;
 					regulator-min-microamp = <2500000>;
@@ -683,8 +696,8 @@
 					ams,external-control = <1>;
 				};
 
-				as3722_sd2: sd2 {
-					regulator-name = "vddio-ddr";
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
 					regulator-min-microvolt = <1350000>;
 					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
@@ -692,23 +705,21 @@
 				};
 
 				sd3 {
-					regulator-name = "vddio-ddr-2phase";
+					regulator-name = "+1.35V_LP0(sd3)";
 					regulator-min-microvolt = <1350000>;
 					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
 
-				sd4 {
-					regulator-name = "avdd-pex-sata";
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
-					regulator-boot-on;
-					regulator-always-on;
 				};
 
-				as3722_sd5: sd5 {
-					regulator-name = "vddio-sys";
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-boot-on;
@@ -716,7 +727,7 @@
 				};
 
 				sd6 {
-					regulator-name = "vdd-gpu";
+					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-min-microamp = <3500000>;
@@ -726,7 +737,7 @@
 				};
 
 				ldo0 {
-					regulator-name = "avdd_pll";
+					regulator-name = "+1.05V_RUN_AVDD";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 					regulator-boot-on;
@@ -735,13 +746,13 @@
 				};
 
 				ldo1 {
-					regulator-name = "run-cam-1.8";
+					regulator-name = "+1.8V_RUN_CAM";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
 				ldo2 {
-					regulator-name = "gen-avdd,vddio-hsic";
+					regulator-name = "+1.2V_GEN_AVDD";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-boot-on;
@@ -749,7 +760,7 @@
 				};
 
 				ldo3 {
-					regulator-name = "vdd-rtc";
+					regulator-name = "+1.00V_LP0_VDD_RTC";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-boot-on;
@@ -757,48 +768,44 @@
 					ams,enable-tracking;
 				};
 
-				ldo4 {
-					regulator-name = "vdd-cam";
+				vdd_run_cam: ldo4 {
+					regulator-name = "+3.3V_RUN_CAM";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
-					regulator-boot-on;
-					regulator-always-on;
 				};
 
 				ldo5 {
-					regulator-name = "vdd-cam-front";
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 				};
 
-				ldo6 {
-					regulator-name = "vddio-sdmmc3";
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
 				};
 
 				ldo7 {
-					regulator-name = "vdd-cam-rear";
+					regulator-name = "+1.05V_RUN_CAM_REAR";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 				};
 
 				ldo9 {
-					regulator-name = "vdd-touch";
+					regulator-name = "+2.8V_RUN_TOUCH";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 				};
 
 				ldo10 {
-					regulator-name = "vdd-cam-af";
+					regulator-name = "+2.8V_RUN_CAM_AF";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 				};
 
 				ldo11 {
-					regulator-name = "vpp-fuse";
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
@@ -806,7 +813,7 @@
 		};
 	};
 
-	spi@7000d400 {
+	spi@0,7000d400 {
 		status = "okay";
 
 		cros-ec@0 {
@@ -912,7 +919,17 @@
 		};
 	};
 
-	pmc@7000e400 {
+	spi@0,7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q32dw";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@0,7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -923,24 +940,64 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
-	sdhci@700b0400 {
+	sdhci@0,700b0400 {
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
 		status = "okay";
 		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
-	sdhci@700b0600 {
+	sdhci@0,700b0600 {
 		status = "okay";
 		bus-width = <8>;
 	};
 
-	ahub@70300000 {
-		i2s@70301100 {
+	ahub@0,70300000 {
+		i2s@0,70301100 {
 			status = "okay";
 		};
 	};
 
+	usb@0,7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d000000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb1_vbus>;
+	};
+
+	usb@0,7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d004000 {
+		status = "okay";
+		vbus-supply = <&vdd_run_cam>;
+	};
+
+	usb@0,7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb3_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_led>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -948,7 +1005,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
@@ -966,104 +1023,163 @@
 		};
 	};
 
+	panel: panel {
+		compatible = "lg,lp129qe", "simple-panel";
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&dpaux>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		vdd_ac_bat_reg: regulator@0 {
+		vdd_mux: regulator@0 {
 			compatible = "regulator-fixed";
 			reg = <0>;
-			regulator-name = "vdd_ac_bat";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+			regulator-name = "+VDD_MUX";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
 			regulator-always-on;
+			regulator-boot-on;
 		};
 
-		vdd_3v3_reg: regulator@1 {
+		vdd_5v0_sys: regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
-			regulator-name = "vdd_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
+			regulator-name = "+5V_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
 			regulator-always-on;
 			regulator-boot-on;
-			enable-active-high;
-			gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vdd_mux>;
 		};
 
-		vdd_3v3_modem_reg: regulator@2 {
+		vdd_3v3_sys: regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
-			regulator-name = "vdd-modem-3v3";
+			regulator-name = "+3.3V_SYS";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&as3722 2 GPIO_ACTIVE_HIGH>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
 		};
 
-		vdd_hdmi_5v0_reg: regulator@3 {
+		vdd_3v3_run: regulator@3 {
 			compatible = "regulator-fixed";
 			reg = <3>;
-			regulator-name = "vdd-hdmi-5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+			regulator-name = "+3.3V_RUN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vdd_3v3_sys>;
 		};
 
-		vdd_bl_reg: regulator@4 {
+		vdd_3v3_hdmi: regulator@4 {
 			compatible = "regulator-fixed";
 			reg = <4>;
-			regulator-name = "vdd-bl";
+			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_3v3_run>;
 		};
 
-		vdd_ts_sw_5v0: regulator@5 {
+		vdd_led: regulator@5 {
 			compatible = "regulator-fixed";
 			reg = <5>;
-			regulator-name = "vdd_ts_sw";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+			regulator-name = "+VDD_LED";
+			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
-			regulator-boot-on;
-			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_mux>;
 		};
 
-		usb1_vbus_reg: regulator@6 {
+		vdd_5v0_ts: regulator@6 {
 			compatible = "regulator-fixed";
 			reg = <6>;
-			regulator-name = "usb1_vbus";
+			regulator-name = "+5V_VDD_TS_SW";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			regulator-boot-on;
+			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
 		};
 
-		usb3_vbus_reg: regulator@7 {
+		vdd_usb1_vbus: regulator@7 {
 			compatible = "regulator-fixed";
 			reg = <7>;
-			regulator-name = "usb3_vbus";
+			regulator-name = "+5V_USB_HS";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
+			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
 			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
 		};
 
-		panel_3v3_reg: regulator@8 {
+		vdd_usb3_vbus: regulator@8 {
 			compatible = "regulator-fixed";
 			reg = <8>;
-			regulator-name = "panel_3v3";
+			regulator-name = "+5V_USB_SS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_3v3_panel: regulator@9 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "+3.3V_PANEL";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
+			gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_3v3_lp0: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "+3.3V_LP0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			/*
+			 * TODO: find a way to wire this up with the USB EHCI
+			 * controllers so that it can be enabled on demand.
+			 */
+			regulator-always-on;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_hdmi_pll: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_1v05_run>;
+		};
+
+		vdd_5v0_hdmi: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "+5V_HDMI_CON";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
-			gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vdd_5v0_sys>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index ec0698a8354a..6e6bc4e8185c 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -8,22 +8,103 @@
 / {
 	compatible = "nvidia,tegra124";
 	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	host1x@0,50000000 {
+		compatible = "nvidia,tegra124-host1x", "simple-bus";
+		reg = <0x0 0x50000000 0x0 0x00034000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
+
+		dc@0,54200000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54200000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP1>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			nvidia,head = <0>;
+		};
+
+		dc@0,54240000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54240000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP2>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			nvidia,head = <1>;
+		};
+
+		hdmi@0,54280000 {
+			compatible = "nvidia,tegra124-hdmi";
+			reg = <0x0 0x54280000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+				 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		sor@0,54540000 {
+			compatible = "nvidia,tegra124-sor";
+			reg = <0x0 0x54540000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_SOR0>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>,
+				 <&tegra_car TEGRA124_CLK_CLK_M>;
+			clock-names = "sor", "parent", "dp", "safe";
+			resets = <&tegra_car 182>;
+			reset-names = "sor";
+			status = "disabled";
+		};
+
+		dpaux@0,545c0000 {
+			compatible = "nvidia,tegra124-dpaux";
+			reg = <0x0 0x545c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DPAUX>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 181>;
+			reset-names = "dpaux";
+			status = "disabled";
+		};
+	};
 
-	gic: interrupt-controller@50041000 {
+	gic: interrupt-controller@0,50041000 {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x50041000 0x1000>,
-		      <0x50042000 0x1000>,
-		      <0x50044000 0x2000>,
-		      <0x50046000 0x2000>;
+		reg = <0x0 0x50041000 0x0 0x1000>,
+		      <0x0 0x50042000 0x0 0x1000>,
+		      <0x0 0x50044000 0x0 0x2000>,
+		      <0x0 0x50046000 0x0 0x2000>;
 		interrupts = <GIC_PPI 9
 			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
-	timer@60005000 {
+	timer@0,60005000 {
 		compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
-		reg = <0x60005000 0x400>;
+		reg = <0x0 0x60005000 0x0 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
@@ -33,16 +114,16 @@
 		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
 	};
 
-	tegra_car: clock@60006000 {
+	tegra_car: clock@0,60006000 {
 		compatible = "nvidia,tegra124-car";
-		reg = <0x60006000 0x1000>;
+		reg = <0x0 0x60006000 0x0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
 
-	gpio: gpio@6000d000 {
+	gpio: gpio@0,6000d000 {
 		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
-		reg = <0x6000d000 0x1000>;
+		reg = <0x0 0x6000d000 0x0 0x1000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
@@ -57,9 +138,9 @@
 		interrupt-controller;
 	};
 
-	apbdma: dma@60020000 {
+	apbdma: dma@0,60020000 {
 		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
-		reg = <0x60020000 0x1400>;
+		reg = <0x0 0x60020000 0x0 0x1400>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
@@ -98,10 +179,10 @@
 		#dma-cells = <1>;
 	};
 
-	pinmux: pinmux@70000868 {
+	pinmux: pinmux@0,70000868 {
 		compatible = "nvidia,tegra124-pinmux";
-		reg = <0x70000868 0x164>,	/* Pad control registers */
-		      <0x70003000 0x434>;	/* Mux registers */
+		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
+		      <0x0 0x70003000 0x0 0x434>; /* Mux registers */
 	};
 
 	/*
@@ -112,9 +193,9 @@
 	 * the APB DMA based serial driver, the comptible is
 	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
 	 */
-	serial@70006000 {
+	serial@0,70006000 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x70006000 0x40>;
+		reg = <0x0 0x70006000 0x0 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
@@ -125,9 +206,9 @@
 		status = "disabled";
 	};
 
-	serial@70006040 {
+	serial@0,70006040 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x70006040 0x40>;
+		reg = <0x0 0x70006040 0x0 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
@@ -138,9 +219,9 @@
 		status = "disabled";
 	};
 
-	serial@70006200 {
+	serial@0,70006200 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x70006200 0x40>;
+		reg = <0x0 0x70006200 0x0 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
@@ -151,9 +232,9 @@
 		status = "disabled";
 	};
 
-	serial@70006300 {
+	serial@0,70006300 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x70006300 0x40>;
+		reg = <0x0 0x70006300 0x0 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
@@ -164,22 +245,9 @@
 		status = "disabled";
 	};
 
-	serial@70006400 {
-		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x70006400 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_UARTE>;
-		resets = <&tegra_car 66>;
-		reset-names = "serial";
-		dmas = <&apbdma 20>, <&apbdma 20>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	pwm@7000a000 {
+	pwm@0,7000a000 {
 		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
-		reg = <0x7000a000 0x100>;
+		reg = <0x0 0x7000a000 0x0 0x100>;
 		#pwm-cells = <2>;
 		clocks = <&tegra_car TEGRA124_CLK_PWM>;
 		resets = <&tegra_car 17>;
@@ -187,9 +255,9 @@
 		status = "disabled";
 	};
 
-	i2c@7000c000 {
+	i2c@0,7000c000 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x7000c000 0x100>;
+		reg = <0x0 0x7000c000 0x0 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -202,9 +270,9 @@
 		status = "disabled";
 	};
 
-	i2c@7000c400 {
+	i2c@0,7000c400 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x7000c400 0x100>;
+		reg = <0x0 0x7000c400 0x0 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -217,9 +285,9 @@
 		status = "disabled";
 	};
 
-	i2c@7000c500 {
+	i2c@0,7000c500 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x7000c500 0x100>;
+		reg = <0x0 0x7000c500 0x0 0x100>;
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -232,9 +300,9 @@
 		status = "disabled";
 	};
 
-	i2c@7000c700 {
+	i2c@0,7000c700 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x7000c700 0x100>;
+		reg = <0x0 0x7000c700 0x0 0x100>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -247,9 +315,9 @@
 		status = "disabled";
 	};
 
-	i2c@7000d000 {
+	i2c@0,7000d000 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x7000d000 0x100>;
+		reg = <0x0 0x7000d000 0x0 0x100>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -262,9 +330,9 @@
 		status = "disabled";
 	};
 
-	i2c@7000d100 {
+	i2c@0,7000d100 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x7000d100 0x100>;
+		reg = <0x0 0x7000d100 0x0 0x100>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -277,9 +345,9 @@
 		status = "disabled";
 	};
 
-	spi@7000d400 {
+	spi@0,7000d400 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x7000d400 0x200>;
+		reg = <0x0 0x7000d400 0x0 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -292,9 +360,9 @@
 		status = "disabled";
 	};
 
-	spi@7000d600 {
+	spi@0,7000d600 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x7000d600 0x200>;
+		reg = <0x0 0x7000d600 0x0 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -307,9 +375,9 @@
 		status = "disabled";
 	};
 
-	spi@7000d800 {
+	spi@0,7000d800 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x7000d800 0x200>;
+		reg = <0x0 0x7000d800 0x0 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -322,9 +390,9 @@
 		status = "disabled";
 	};
 
-	spi@7000da00 {
+	spi@0,7000da00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x7000da00 0x200>;
+		reg = <0x0 0x7000da00 0x0 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -337,9 +405,9 @@
 		status = "disabled";
 	};
 
-	spi@7000dc00 {
+	spi@0,7000dc00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x7000dc00 0x200>;
+		reg = <0x0 0x7000dc00 0x0 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -352,9 +420,9 @@
 		status = "disabled";
 	};
 
-	spi@7000de00 {
+	spi@0,7000de00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x7000de00 0x200>;
+		reg = <0x0 0x7000de00 0x0 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -367,65 +435,65 @@
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
+	rtc@0,7000e000 {
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
+		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_RTC>;
 	};
 
-	pmc@7000e400 {
+	pmc@0,7000e400 {
 		compatible = "nvidia,tegra124-pmc";
-		reg = <0x7000e400 0x400>;
+		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
 	};
 
-	sdhci@700b0000 {
+	sdhci@0,700b0000 {
 		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x700b0000 0x200>;
+		reg = <0x0 0x700b0000 0x0 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
-	sdhci@700b0200 {
+	sdhci@0,700b0200 {
 		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x700b0200 0x200>;
+		reg = <0x0 0x700b0200 0x0 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SDMMC2>;
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
-	sdhci@700b0400 {
+	sdhci@0,700b0400 {
 		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x700b0400 0x200>;
+		reg = <0x0 0x700b0400 0x0 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SDMMC3>;
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
-	sdhci@700b0600 {
+	sdhci@0,700b0600 {
 		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x700b0600 0x200>;
+		reg = <0x0 0x700b0600 0x0 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SDMMC4>;
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
-	ahub@70300000 {
+	ahub@0,70300000 {
 		compatible = "nvidia,tegra124-ahub";
-		reg = <0x70300000 0x200>,
-		      <0x70300800 0x800>,
-		      <0x70300200 0x600>;
+		reg = <0x0 0x70300000 0x0 0x200>,
+		      <0x0 0x70300800 0x0 0x800>,
+		      <0x0 0x70300200 0x0 0x600>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
 			 <&tegra_car TEGRA124_CLK_APBIF>;
@@ -470,12 +538,12 @@
 			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
 			    "rx9", "tx9";
 		ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 
-		tegra_i2s0: i2s@70301000 {
+		tegra_i2s0: i2s@0,70301000 {
 			compatible = "nvidia,tegra124-i2s";
-			reg = <0x70301000 0x100>;
+			reg = <0x0 0x70301000 0x0 0x100>;
 			nvidia,ahub-cif-ids = <4 4>;
 			clocks = <&tegra_car TEGRA124_CLK_I2S0>;
 			resets = <&tegra_car 30>;
@@ -483,9 +551,9 @@
 			status = "disabled";
 		};
 
-		tegra_i2s1: i2s@70301100 {
+		tegra_i2s1: i2s@0,70301100 {
 			compatible = "nvidia,tegra124-i2s";
-			reg = <0x70301100 0x100>;
+			reg = <0x0 0x70301100 0x0 0x100>;
 			nvidia,ahub-cif-ids = <5 5>;
 			clocks = <&tegra_car TEGRA124_CLK_I2S1>;
 			resets = <&tegra_car 11>;
@@ -493,9 +561,9 @@
 			status = "disabled";
 		};
 
-		tegra_i2s2: i2s@70301200 {
+		tegra_i2s2: i2s@0,70301200 {
 			compatible = "nvidia,tegra124-i2s";
-			reg = <0x70301200 0x100>;
+			reg = <0x0 0x70301200 0x0 0x100>;
 			nvidia,ahub-cif-ids = <6 6>;
 			clocks = <&tegra_car TEGRA124_CLK_I2S2>;
 			resets = <&tegra_car 18>;
@@ -503,9 +571,9 @@
 			status = "disabled";
 		};
 
-		tegra_i2s3: i2s@70301300 {
+		tegra_i2s3: i2s@0,70301300 {
 			compatible = "nvidia,tegra124-i2s";
-			reg = <0x70301300 0x100>;
+			reg = <0x0 0x70301300 0x0 0x100>;
 			nvidia,ahub-cif-ids = <7 7>;
 			clocks = <&tegra_car TEGRA124_CLK_I2S3>;
 			resets = <&tegra_car 101>;
@@ -513,9 +581,9 @@
 			status = "disabled";
 		};
 
-		tegra_i2s4: i2s@70301400 {
+		tegra_i2s4: i2s@0,70301400 {
 			compatible = "nvidia,tegra124-i2s";
-			reg = <0x70301400 0x100>;
+			reg = <0x0 0x70301400 0x0 0x100>;
 			nvidia,ahub-cif-ids = <8 8>;
 			clocks = <&tegra_car TEGRA124_CLK_I2S4>;
 			resets = <&tegra_car 102>;
@@ -524,6 +592,108 @@
 		};
 	};
 
+	usb@0,7d000000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@0,7d000000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d000000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	usb@0,7d004000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d004000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@0,7d004000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d004000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	usb@0,7d008000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d008000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@0,7d008000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d008000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 3fb1f50f6d46..f45aad688d9b 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -28,6 +28,7 @@
 		hdmi@54280000 {
 			status = "okay";
 
+			hdmi-supply = <&vdd_5v0_hdmi>;
 			vdd-supply = <&hdmi_vdd_reg>;
 			pll-supply = <&hdmi_pll_reg>;
 
@@ -724,6 +725,17 @@
 			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
+
+		vdd_5v0_hdmi: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "VDDIO_HDMI";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_reg>;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index c7cd8e6802d7..9a39a8001f78 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -17,6 +17,14 @@
 	};
 
 	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
 		hdmi@54280000 {
 			status = "okay";
 
@@ -257,7 +265,11 @@
 		status = "okay";
 	};
 
-	i2c@7000c000 {
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lvds_ddc: i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -475,6 +487,18 @@
 		non-removable;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+		default-brightness-level = <10>;
+
+		backlight-boot-off;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -509,6 +533,16 @@
 		};
 	};
 
+	panel: panel {
+		compatible = "samsung,ltn101nt05", "simple-panel";
+
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(M, 6) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -522,6 +556,16 @@
 			regulator-max-microvolt = <5000000>;
 			regulator-always-on;
 		};
+
+		vdd_pnl_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+3VS,vdd_pnl";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index a11b6e7b4759..a1d4bf9895d7 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -17,6 +17,14 @@
 	};
 
 	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
 		hdmi@54280000 {
 			status = "okay";
 
@@ -312,6 +320,10 @@
 		status = "okay";
 	};
 
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
 	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -369,7 +381,7 @@
 			#size-cells = <0>;
 		};
 
-		i2c@1 {
+		lvds_ddc: i2c@1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -762,6 +774,17 @@
 		non-removable;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 2 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -795,6 +818,16 @@
 		};
 	};
 
+	panel: panel {
+		compatible = "chunghwa,claa101wa01a", "simple-panel";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -839,6 +872,26 @@
 			regulator-always-on;
 			regulator-boot-on;
 		};
+
+		vdd_pnl_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_pnl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_bl_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 571d12e6ac2d..ca8484cccddc 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -17,6 +17,14 @@
 	};
 
 	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
 		hdmi@54280000 {
 			status = "okay";
 
@@ -309,6 +317,10 @@
 		status = "okay";
 	};
 
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
 	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -359,7 +371,7 @@
 			#size-cells = <0>;
 		};
 
-		i2c@1 {
+		lvds_ddc: i2c@1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -557,6 +569,17 @@
 		non-removable;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 2 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -581,6 +604,16 @@
 		};
 	};
 
+	panel: panel {
+		compatible = "chunghwa,claa101wa01a", "simple-panel";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -614,7 +647,7 @@
 			enable-active-high;
 		};
 
-		regulator@3 {
+		vdd_pnl_reg: regulator@3 {
 			compatible = "regulator-fixed";
 			reg = <3>;
 			regulator-name = "vdd_pnl";
@@ -624,7 +657,7 @@
 			enable-active-high;
 		};
 
-		regulator@4 {
+		vdd_bl_reg: regulator@4 {
 			compatible = "regulator-fixed";
 			reg = <4>;
 			regulator-name = "vdd_bl";
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 48d2a7f4d0c0..a7ddf70df50b 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -556,6 +556,10 @@
 			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
 		bus-range = <0x00 0xff>;
 		#address-cells = <3>;
 		#size-cells = <2>;
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index e93fe45b7803..3189791a9289 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -40,6 +40,7 @@
 		hdmi@54280000 {
 			status = "okay";
 
+			hdmi-supply = <&vdd_5v0_hdmi>;
 			vdd-supply = <&sys_3v3_reg>;
 			pll-supply = <&vio_reg>;
 
@@ -478,6 +479,17 @@
 			gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
 			vin-supply = <&sys_3v3_reg>;
 		};
+
+		vdd_5v0_hdmi: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "+VDD_5V_HDMI";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&sys_3v3_reg>;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 1e156d9d0506..0cf0848a82d8 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -187,6 +187,13 @@
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		i2cmux@70 {
+			compatible = "nxp,pca9546";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x70>;
+		};
 	};
 
 	i2c@7000c700 {
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
new file mode 100644
index 000000000000..7793abd5bef1
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -0,0 +1,205 @@
+/dts-v1/;
+
+#include "tegra30-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri T30 on Colibri Evaluation Board";
+	compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/tps65911@2d";
+		rtc2 = "/rtc@7000e000";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "stm,m41t00";
+			reg = <0x68>;
+		};
+	};
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	hdmiddc: i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Colibri SSP */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		can0: can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+			spi-max-frequency = <10000000>;
+		};
+		spidev0: spi@1 {
+			compatible = "spidev";
+			reg = <1>;
+			spi-max-frequency = <25000000>;
+		};
+	};
+
+	sdhci@78000200 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		vbus-supply = <&usbc_vbus_reg>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&usbh_vbus_reg>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		/* PWM<A> */
+		pwms = <&pwm 0 5000000>;
+		brightness-levels = <255 128 64 32 16 8 4 0>;
+		default-brightness-level = <6>;
+		/* BL_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		clk16m: clk@1 {
+			compatible = "fixed-clock";
+			reg=<1>;
+			#clock-cells = <0>;
+			clock-frequency = <16000000>;
+			clock-output-names = "clk16m";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu", "simple-panel";
+
+		backlight = <&backlight>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		pwmb {
+			label = "PWM<B>";
+			pwms = <&pwm 1 19600>;
+			max-brightness = <255>;
+		};
+		pwmc {
+			label = "PWM<C>";
+			pwms = <&pwm 2 19600>;
+			max-brightness = <255>;
+		};
+		pwmd {
+			label = "PWM<D>";
+			pwms = <&pwm 3 19600>;
+			max-brightness = <255>;
+		};
+	};
+
+	regulators {
+		sys_5v0_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		usbc_vbus_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usbc_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			vin-supply = <&sys_5v0_reg>;
+		};
+
+		/* USBH_PEN */
+		usbh_vbus_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usbh_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+			vin-supply = <&sys_5v0_reg>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
new file mode 100644
index 000000000000..bf16f8e65627
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -0,0 +1,377 @@
+#include <dt-bindings/input/input.h>
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Colibri T30 Device Tree
+ * Compatible for Revisions 1.1B/1.1C/1.1D
+ */
+/ {
+	model = "Toradex Colibri T30";
+	compatible = "toradex,colibri_t30", "nvidia,tegra30";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			vdd-supply = <&sys_3v3_reg>;
+			pll-supply = <&vio_reg>;
+
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmiddc>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Colibri BL_ON */
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri Backlight PWM<A> */
+			sdmmc3_dat3_pb4 {
+				nvidia,pins =	"sdmmc3_dat3_pb4";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri CAN_INT */
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
+			 * todays display need DE, disable LCD_M1
+			 */
+			lcd_m1_pw1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Thermal alert, need to be disabled */
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri MMC */
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins =	"kb_row11_ps3",
+						"kb_row12_ps4",
+						"kb_row13_ps5",
+						"kb_row14_ps6",
+						"kb_row15_ps7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri SSP */
+			ulpi_clk_py0 {
+				nvidia,pins =   "ulpi_clk_py0",
+						"ulpi_dir_py1",
+						"ulpi_nxt_py2",
+						"ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat6_pd3 {
+				nvidia,pins =	"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri UART_A */
+			ulpi_data0 {
+				nvidia,pins =   "ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri UART_B */
+			gmi_a16_pj7 {
+				nvidia,pins =   "gmi_a16_pj7",
+						"gmi_a17_pb0",
+						"gmi_a18_pb1",
+						"gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri UART_C */
+			uart2_rxd {
+				nvidia,pins =   "uart2_rxd_pc3",
+						"uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* eMMC */
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	hdmiddc: i2c@7000c700 {
+		clock-frequency = <100000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&sys_3v3_reg>;
+			vcc2-supply = <&sys_3v3_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&sys_3v3_reg>;
+			vcc5-supply = <&sys_3v3_reg>;
+			vcc6-supply = <&vio_reg>;
+			vcc7-supply = <&sys_5v0_reg>;
+			vccio-supply = <&sys_3v3_reg>;
+
+			regulators {
+				/* SW1: +V1.35_VDDIO_DDR */
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				/* SW2: unused */
+
+				/* SW CTRL: +V1.0_VDD_CPU */
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+				};
+
+				/* SWIO: +V1.8 */
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* LDO1: unused */
+
+				/*
+				 * EN_+V3.3 switching via FET:
+				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
+				 * see also v3_3 fixed supply
+				 */
+				ldo2_reg: ldo2 {
+					regulator-name = "en_3v3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* LDO3: unused */
+
+				/* +V1.2_VDD_RTC */
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V2.8_AVDD_VDAC:
+				 * only required for analog RGB
+				 */
+				ldo5_reg: ldo5 {
+					regulator-name = "avdd_vdac";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+				 * but LDO6 can't set voltage in 50mV
+				 * granularity
+				 */
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_plle";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				/* +V1.2_AVDD_PLL */
+				ldo7_reg: ldo7 {
+					regulator-name = "avdd_pll";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* +V1.0_VDD_DDR_HS */
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/*
+		 * LM95245 temperature sensor
+		 * Note: OVERT_N directly connected to PMIC PWRDN
+		 */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+
+		/* SW: +V1.2_VDD_CORE */
+		tps62362@60 {
+			compatible = "ti,tps62362";
+			reg = <0x60>;
+
+			regulator-name = "tps62362-vout";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-low;
+			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
+			ti,vsel1-state-low;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	emmc: sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> AX88772B */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		nvidia,is-wired = <1>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clk@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sys_3v3_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 19a84e933f4e..dec4fc823901 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -28,6 +28,10 @@
 			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
 		bus-range = <0x00 0xff>;
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -144,9 +148,9 @@
 			compatible = "nvidia,tegra30-gr2d";
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
 			resets = <&tegra_car 21>;
 			reset-names = "2d";
-			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
 		};
 
 		gr3d@54180000 {
diff --git a/arch/arm/boot/dts/tps65910.dtsi b/arch/arm/boot/dts/tps65910.dtsi
index 92693a89160e..b0ac6657a170 100644
--- a/arch/arm/boot/dts/tps65910.dtsi
+++ b/arch/arm/boot/dts/tps65910.dtsi
@@ -82,5 +82,10 @@
 			reg = <12>;
 			regulator-compatible = "vmmc";
 		};
+
+		vbb_reg: regulator@13 {
+			reg = <13>;
+			regulator-compatible = "vbb";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index 4217096ee677..36ae9160b558 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -145,4 +145,17 @@
 		compatible = "ti,twl4030-pwrbutton";
 		interrupts = <8>;
 	};
+
+	twl_keypad: keypad {
+		compatible = "ti,twl4030-keypad";
+		interrupts = <1>;
+		keypad,num-rows = <8>;
+		keypad,num-columns = <8>;
+	};
+
+	twl_madc: madc {
+		compatible = "ti,twl4030-madc";
+		interrupts = <3>;
+		#io-channel-cells = <1>;
+	};
 };
diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi
index c353ef0a6ac7..3537ae5b2146 100644
--- a/arch/arm/boot/dts/twl4030_omap3.dtsi
+++ b/arch/arm/boot/dts/twl4030_omap3.dtsi
@@ -8,7 +8,7 @@
 
 &twl {
 	pinctrl-names = "default";
-	pinctrl-0 = <&twl4030_pins>;
+	pinctrl-0 = <&twl4030_pins &twl4030_vpins>;
 };
 
 &omap3_pmx_core {
@@ -23,3 +23,20 @@
 		>;
 	};
 };
+
+/*
+ * If your board is not using the I2C4 pins with twl4030, then don't include
+ * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode
+ * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and
+ * sys_nvmode2 signaling.
+ */
+&omap3_pmx_wkup {
+	twl4030_vpins: pinmux_twl4030_vpins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0)		/* i2c4_scl.i2c4_scl */
+			OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0)		/* i2c4_sda.i2c4_sda */
+			OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0)	/* sys_clkreq.sys_clkreq */
+			OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0)	/* sys_off_mode.sys_off_mode */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index ac870fb3fa0d..756c986995a3 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -74,8 +74,24 @@
 			v2m_sysreg: sysreg@010000 {
 				compatible = "arm,vexpress-sysreg";
 				reg = <0x010000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
+
+				v2m_led_gpios: sys_led@08 {
+					compatible = "arm,vexpress-sysreg,sys_led";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_mmc_gpios: sys_mci@48 {
+					compatible = "arm,vexpress-sysreg,sys_mci";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_flash_gpios: sys_flash@4c {
+					compatible = "arm,vexpress-sysreg,sys_flash";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
 			};
 
 			v2m_sysctl: sysctl@020000 {
@@ -113,8 +129,8 @@
 				compatible = "arm,pl180", "arm,primecell";
 				reg = <0x050000 0x1000>;
 				interrupts = <9 10>;
-				cd-gpios = <&v2m_sysreg 0 0>;
-				wp-gpios = <&v2m_sysreg 1 0>;
+				cd-gpios = <&v2m_mmc_gpios 0 0>;
+				wp-gpios = <&v2m_mmc_gpios 1 0>;
 				max-frequency = <12000000>;
 				vmmc-supply = <&v2m_fixed_3v3>;
 				clocks = <&v2m_clk24mhz>, <&smbclk>;
@@ -265,6 +281,58 @@
 			clock-output-names = "v2m:refclk32khz";
 		};
 
+		leds {
+			compatible = "gpio-leds";
+
+			user@1 {
+				label = "v2m:green:user1";
+				gpios = <&v2m_led_gpios 0 0>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			user@2 {
+				label = "v2m:green:user2";
+				gpios = <&v2m_led_gpios 1 0>;
+				linux,default-trigger = "mmc0";
+			};
+
+			user@3 {
+				label = "v2m:green:user3";
+				gpios = <&v2m_led_gpios 2 0>;
+				linux,default-trigger = "cpu0";
+			};
+
+			user@4 {
+				label = "v2m:green:user4";
+				gpios = <&v2m_led_gpios 3 0>;
+				linux,default-trigger = "cpu1";
+			};
+
+			user@5 {
+				label = "v2m:green:user5";
+				gpios = <&v2m_led_gpios 4 0>;
+				linux,default-trigger = "cpu2";
+			};
+
+			user@6 {
+				label = "v2m:green:user6";
+				gpios = <&v2m_led_gpios 5 0>;
+				linux,default-trigger = "cpu3";
+			};
+
+			user@7 {
+				label = "v2m:green:user7";
+				gpios = <&v2m_led_gpios 6 0>;
+				linux,default-trigger = "cpu4";
+			};
+
+			user@8 {
+				label = "v2m:green:user8";
+				gpios = <&v2m_led_gpios 7 0>;
+				linux,default-trigger = "cpu5";
+			};
+		};
+
 		mcc {
 			compatible = "arm,vexpress,config-bus";
 			arm,vexpress,config-bridge = <&v2m_sysreg>;
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index f1420368355b..ba856d604fb7 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -73,8 +73,24 @@
 			v2m_sysreg: sysreg@00000 {
 				compatible = "arm,vexpress-sysreg";
 				reg = <0x00000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
+
+				v2m_led_gpios: sys_led@08 {
+					compatible = "arm,vexpress-sysreg,sys_led";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_mmc_gpios: sys_mci@48 {
+					compatible = "arm,vexpress-sysreg,sys_mci";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_flash_gpios: sys_flash@4c {
+					compatible = "arm,vexpress-sysreg,sys_flash";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
 			};
 
 			v2m_sysctl: sysctl@01000 {
@@ -112,8 +128,8 @@
 				compatible = "arm,pl180", "arm,primecell";
 				reg = <0x05000 0x1000>;
 				interrupts = <9 10>;
-				cd-gpios = <&v2m_sysreg 0 0>;
-				wp-gpios = <&v2m_sysreg 1 0>;
+				cd-gpios = <&v2m_mmc_gpios 0 0>;
+				wp-gpios = <&v2m_mmc_gpios 1 0>;
 				max-frequency = <12000000>;
 				vmmc-supply = <&v2m_fixed_3v3>;
 				clocks = <&v2m_clk24mhz>, <&smbclk>;
@@ -264,6 +280,58 @@
 			clock-output-names = "v2m:refclk32khz";
 		};
 
+		leds {
+			compatible = "gpio-leds";
+
+			user@1 {
+				label = "v2m:green:user1";
+				gpios = <&v2m_led_gpios 0 0>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			user@2 {
+				label = "v2m:green:user2";
+				gpios = <&v2m_led_gpios 1 0>;
+				linux,default-trigger = "mmc0";
+			};
+
+			user@3 {
+				label = "v2m:green:user3";
+				gpios = <&v2m_led_gpios 2 0>;
+				linux,default-trigger = "cpu0";
+			};
+
+			user@4 {
+				label = "v2m:green:user4";
+				gpios = <&v2m_led_gpios 3 0>;
+				linux,default-trigger = "cpu1";
+			};
+
+			user@5 {
+				label = "v2m:green:user5";
+				gpios = <&v2m_led_gpios 4 0>;
+				linux,default-trigger = "cpu2";
+			};
+
+			user@6 {
+				label = "v2m:green:user6";
+				gpios = <&v2m_led_gpios 5 0>;
+				linux,default-trigger = "cpu3";
+			};
+
+			user@7 {
+				label = "v2m:green:user7";
+				gpios = <&v2m_led_gpios 6 0>;
+				linux,default-trigger = "cpu4";
+			};
+
+			user@8 {
+				label = "v2m:green:user8";
+				gpios = <&v2m_led_gpios 7 0>;
+				linux,default-trigger = "cpu5";
+			};
+		};
+
 		mcc {
 			compatible = "arm,vexpress,config-bus";
 			arm,vexpress,config-bridge = <&v2m_sysreg>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 15f98cbcb75a..a25c262326dc 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -312,6 +312,7 @@
 			arm,vexpress-sysreg,func = <12 0>;
 			label = "A15 Pcore";
 		};
+
 		power@1 {
 			/* Total power for the three A7 cores */
 			compatible = "arm,vexpress-power";
@@ -322,14 +323,14 @@
 		energy@0 {
 			/* Total energy for the two A15 cores */
 			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 0>;
+			arm,vexpress-sysreg,func = <13 0>, <13 1>;
 			label = "A15 Jcore";
 		};
 
 		energy@2 {
 			/* Total energy for the three A7 cores */
 			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 2>;
+			arm,vexpress-sysreg,func = <13 2>, <13 3>;
 			label = "A7 Jcore";
 		};
 	};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index c544a5504591..d2709b73316b 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -88,6 +88,14 @@
 		interrupts = <1 13 0x304>;
 	};
 
+	timer@2c000200 {
+		compatible = "arm,cortex-a5-global-timer",
+		             "arm,cortex-a9-global-timer";
+		reg = <0x2c000200 0x20>;
+		interrupts = <1 11 0x304>;
+		clocks = <&oscclk0>;
+	};
+
 	watchdog@2c000620 {
 		compatible = "arm,cortex-a5-twd-wdt";
 		reg = <0x2c000620 0x20>;
@@ -120,7 +128,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		osc@0 {
+		oscclk0: osc@0 {
 			/* CPU and internal AXI reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dts
new file mode 100644
index 000000000000..aecc7dbc65e8
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-colibri.dts
@@ -0,0 +1,123 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "Toradex Colibri VF61 COM";
+	compatible = "toradex,vf610-colibri", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP0,115200";
+	};
+
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+
+	clocks {
+		enet_ext {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&L2 {
+	arm,data-latency = <2 1 2>;
+	arm,tag-latency = <3 2 3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTB20__GPIO_42	0x219d
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_uart0: uart0grp {
+			fsl,pins = <
+				VF610_PAD_PTB10__UART0_TX		0x21a2
+				VF610_PAD_PTB11__UART0_RX		0x21a1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				VF610_PAD_PTD0__UART2_TX		0x21a2
+				VF610_PAD_PTD1__UART2_RX		0x21a1
+				VF610_PAD_PTD2__UART2_RTS		0x21a2
+				VF610_PAD_PTD3__UART2_CTS		0x21a1
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
index c42e4f938dcd..3fd1b74e1216 100644
--- a/arch/arm/boot/dts/vf610-cosmic.dts
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@@ -36,12 +36,37 @@
 &fec1 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1_1>;
+	pinctrl-0 = <&pinctrl_fec1>;
 	status = "okay";
 };
 
+&iomuxc {
+	vf610-cosmic {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+	};
+};
+
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index c8047ca16501..11d733406c7e 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -25,21 +25,81 @@
 	clocks {
 		audio_ext {
 			compatible = "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24576000>;
 		};
 
 		enet_ext {
 			compatible = "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <50000000>;
 		};
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vcc_3v3_mcu: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vcc_3v3_mcu";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			master-clkdir-out;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
 };
 
 &dspi0 {
 	bus-num = <0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_dspi0_1>;
+	pinctrl-0 = <&pinctrl_dspi0>;
 	status = "okay";
 
 	sflash: at26df081a@0 {
@@ -53,29 +113,155 @@
 	};
 };
 
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &fec0 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec0_1>;
+	pinctrl-0 = <&pinctrl_fec0>;
 	status = "okay";
 };
 
 &fec1 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1_1>;
+	pinctrl-0 = <&pinctrl_fec1>;
 	status = "okay";
 };
 
 &i2c0 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c0_1>;
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+	       #sound-dai-cells = <0>;
+	       compatible = "fsl,sgtl5000";
+	       reg = <0x0a>;
+	       VDDA-supply = <&reg_3p3v>;
+	       VDDIO-supply = <&reg_3p3v>;
+	       clocks = <&clks VF610_CLK_SAI2>;
+       };
+};
+
+&iomuxc {
+	vf610-twr {
+		pinctrl_adc0_ad5: adc0ad5grp {
+			fsl,pins = <
+				VF610_PAD_PTC30__ADC0_SE5		0xa1
+			>;
+		};
+
+		pinctrl_dspi0: dspi0grp {
+			fsl,pins = <
+				VF610_PAD_PTB19__DSPI0_CS0		0x1182
+				VF610_PAD_PTB20__DSPI0_SIN		0x1181
+				VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+				VF610_PAD_PTB22__DSPI0_SCK		0x1182
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTA7__GPIO_134	0x219d
+			>;
+		};
+
+		pinctrl_fec0: fec0grp {
+			fsl,pins = <
+				VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+				VF610_PAD_PTC0__ENET_RMII0_MDC		0x30d3
+				VF610_PAD_PTC1__ENET_RMII0_MDIO		0x30d1
+				VF610_PAD_PTC2__ENET_RMII0_CRS		0x30d1
+				VF610_PAD_PTC3__ENET_RMII0_RXD1		0x30d1
+				VF610_PAD_PTC4__ENET_RMII0_RXD0		0x30d1
+				VF610_PAD_PTC5__ENET_RMII0_RXER		0x30d1
+				VF610_PAD_PTC6__ENET_RMII0_TXD1		0x30d2
+				VF610_PAD_PTC7__ENET_RMII0_TXD0		0x30d2
+				VF610_PAD_PTC8__ENET_RMII0_TXEN		0x30d2
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_i2c0: i2c0grp {
+			fsl,pins = <
+				VF610_PAD_PTB14__I2C0_SCL		0x30d3
+				VF610_PAD_PTB15__I2C0_SDA		0x30d3
+			>;
+		};
+
+		pinctrl_pwm0: pwm0grp {
+			fsl,pins = <
+				VF610_PAD_PTB0__FTM0_CH0		0x1582
+				VF610_PAD_PTB1__FTM0_CH1		0x1582
+				VF610_PAD_PTB2__FTM0_CH2		0x1582
+				VF610_PAD_PTB3__FTM0_CH3		0x1582
+				VF610_PAD_PTB6__FTM0_CH6		0x1582
+				VF610_PAD_PTB7__FTM0_CH7		0x1582
+			>;
+		};
+
+		pinctrl_sai2: sai2grp {
+			fsl,pins = <
+				VF610_PAD_PTA16__SAI2_TX_BCLK		0x02ed
+				VF610_PAD_PTA18__SAI2_TX_DATA		0x02ee
+				VF610_PAD_PTA19__SAI2_TX_SYNC		0x02ed
+				VF610_PAD_PTA21__SAI2_RX_BCLK		0x02ed
+				VF610_PAD_PTA22__SAI2_RX_DATA		0x02ed
+				VF610_PAD_PTA23__SAI2_RX_SYNC		0x02ed
+				VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x02ed
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+	status = "okay";
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
 	status = "okay";
 };
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index d31ce1b4a7b0..6cc314e7b8fb 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -10,6 +10,7 @@
 #include "skeleton.dtsi"
 #include "vf610-pinfunc.h"
 #include <dt-bindings/clock/vf610-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	aliases {
@@ -44,11 +45,13 @@
 
 		sxosc {
 			compatible = "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		fxosc {
 			compatible = "fixed-clock";
+			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
@@ -71,8 +74,6 @@
 			intc: interrupt-controller@40002000 {
 				compatible = "arm,cortex-a9-gic";
 				#interrupt-cells = <3>;
-				#address-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				reg = <0x40003000 0x1000>,
 				      <0x40002100 0x100>;
@@ -87,39 +88,66 @@
 				arm,tag-latency = <2 2 2>;
 			};
 
+			edma0: dma-controller@40018000 {
+				#dma-cells = <2>;
+				compatible = "fsl,vf610-edma";
+				reg = <0x40018000 0x2000>,
+					<0x40024000 0x1000>,
+					<0x40025000 0x1000>;
+				interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+						<0 9 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma-tx", "edma-err";
+				dma-channels = <32>;
+				clock-names = "dmamux0", "dmamux1";
+				clocks = <&clks VF610_CLK_DMAMUX0>,
+					<&clks VF610_CLK_DMAMUX1>;
+			};
+
 			uart0: serial@40027000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x40027000 0x1000>;
-				interrupts = <0 61 0x00>;
+				interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART0>;
 				clock-names = "ipg";
+				dmas = <&edma0 0 2>,
+					<&edma0 0 3>;
+				dma-names = "rx","tx";
 				status = "disabled";
 			};
 
 			uart1: serial@40028000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x40028000 0x1000>;
-				interrupts = <0 62 0x04>;
+				interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART1>;
 				clock-names = "ipg";
+				dmas = <&edma0 0 4>,
+					<&edma0 0 5>;
+				dma-names = "rx","tx";
 				status = "disabled";
 			};
 
 			uart2: serial@40029000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x40029000 0x1000>;
-				interrupts = <0 63 0x04>;
+				interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART2>;
 				clock-names = "ipg";
+				dmas = <&edma0 0 6>,
+					<&edma0 0 7>;
+				dma-names = "rx","tx";
 				status = "disabled";
 			};
 
 			uart3: serial@4002a000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x4002a000 0x1000>;
-				interrupts = <0 64 0x04>;
+				interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART3>;
 				clock-names = "ipg";
+				dmas = <&edma0 0 8>,
+					<&edma0 0 9>;
+				dma-names = "rx","tx";
 				status = "disabled";
 			};
 
@@ -128,7 +156,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
 				reg = <0x4002c000 0x1000>;
-				interrupts = <0 67 0x04>;
+				interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
 				spi-num-chipselects = <5>;
@@ -138,20 +166,45 @@
 			sai2: sai@40031000 {
 				compatible = "fsl,vf610-sai";
 				reg = <0x40031000 0x1000>;
-				interrupts = <0 86 0x04>;
+				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_SAI2>;
 				clock-names = "sai";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 0 21>,
+					<&edma0 0 20>;
 				status = "disabled";
 			};
 
 			pit: pit@40037000 {
 				compatible = "fsl,vf610-pit";
 				reg = <0x40037000 0x1000>;
-				interrupts = <0 39 0x04>;
+				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_PIT>;
 				clock-names = "pit";
 			};
 
+			pwm0: pwm@40038000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				#pwm-cells = <3>;
+				reg = <0x40038000 0x1000>;
+				clock-names = "ftm_sys", "ftm_ext",
+					      "ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks VF610_CLK_FTM0>,
+					<&clks VF610_CLK_FTM0_EXT_SEL>,
+					<&clks VF610_CLK_FTM0_FIX_SEL>,
+					<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
+			adc0: adc@4003b000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x4003b000 0x1000>;
+				interrupts = <0 53 0x04>;
+				clocks = <&clks VF610_CLK_ADC0>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
 			wdog@4003e000 {
 				compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
 				reg = <0x4003e000 0x1000>;
@@ -164,7 +217,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,vf610-qspi";
 				reg = <0x40044000 0x1000>;
-				interrupts = <0 24 0x04>;
+				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_QSPI0_EN>,
 					<&clks VF610_CLK_QSPI0>;
 				clock-names = "qspi_en", "qspi";
@@ -175,182 +228,12 @@
 				compatible = "fsl,vf610-iomuxc";
 				reg = <0x40048000 0x1000>;
 				#gpio-range-cells = <3>;
-
-				/* functions and groups pins */
-
-				dcu0 {
-					pinctrl_dcu0_1: dcu0grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTB8__GPIO_30		0x42
-						VF610_PAD_PTE0__DCU0_HSYNC	0x42
-						VF610_PAD_PTE1__DCU0_VSYNC	0x42
-						VF610_PAD_PTE2__DCU0_PCLK	0x42
-						VF610_PAD_PTE4__DCU0_DE		0x42
-						VF610_PAD_PTE5__DCU0_R0		0x42
-						VF610_PAD_PTE6__DCU0_R1		0x42
-						VF610_PAD_PTE7__DCU0_R2		0x42
-						VF610_PAD_PTE8__DCU0_R3		0x42
-						VF610_PAD_PTE9__DCU0_R4		0x42
-						VF610_PAD_PTE10__DCU0_R5	0x42
-						VF610_PAD_PTE11__DCU0_R6	0x42
-						VF610_PAD_PTE12__DCU0_R7	0x42
-						VF610_PAD_PTE13__DCU0_G0	0x42
-						VF610_PAD_PTE14__DCU0_G1	0x42
-						VF610_PAD_PTE15__DCU0_G2	0x42
-						VF610_PAD_PTE16__DCU0_G3	0x42
-						VF610_PAD_PTE17__DCU0_G4	0x42
-						VF610_PAD_PTE18__DCU0_G5	0x42
-						VF610_PAD_PTE19__DCU0_G6	0x42
-						VF610_PAD_PTE20__DCU0_G7	0x42
-						VF610_PAD_PTE21__DCU0_B0	0x42
-						VF610_PAD_PTE22__DCU0_B1	0x42
-						VF610_PAD_PTE23__DCU0_B2	0x42
-						VF610_PAD_PTE24__DCU0_B3	0x42
-						VF610_PAD_PTE25__DCU0_B4	0x42
-						VF610_PAD_PTE26__DCU0_B5	0x42
-						VF610_PAD_PTE27__DCU0_B6	0x42
-						VF610_PAD_PTE28__DCU0_B7	0x42
-						>;
-					};
-				};
-
-				dspi0 {
-					pinctrl_dspi0_1: dspi0grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTB19__DSPI0_CS0	0x1182
-						VF610_PAD_PTB20__DSPI0_SIN	0x1181
-						VF610_PAD_PTB21__DSPI0_SOUT	0x1182
-						VF610_PAD_PTB22__DSPI0_SCK	0x1182
-						>;
-					};
-				};
-
-				esdhc1 {
-					pinctrl_esdhc1_1: esdhc1grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
-						VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
-						VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
-						VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
-						VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
-						VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
-						VF610_PAD_PTA7__GPIO_134	0x219d
-						>;
-					};
-				};
-
-				fec0 {
-					pinctrl_fec0_1: fec0grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTA6__RMII_CLKIN	0x30d1
-						VF610_PAD_PTC0__ENET_RMII0_MDC	0x30d3
-						VF610_PAD_PTC1__ENET_RMII0_MDIO	0x30d1
-						VF610_PAD_PTC2__ENET_RMII0_CRS	0x30d1
-						VF610_PAD_PTC3__ENET_RMII0_RXD1	0x30d1
-						VF610_PAD_PTC4__ENET_RMII0_RXD0	0x30d1
-						VF610_PAD_PTC5__ENET_RMII0_RXER	0x30d1
-						VF610_PAD_PTC6__ENET_RMII0_TXD1	0x30d2
-						VF610_PAD_PTC7__ENET_RMII0_TXD0	0x30d2
-						VF610_PAD_PTC8__ENET_RMII0_TXEN	0x30d2
-						>;
-					};
-				};
-
-				fec1 {
-					pinctrl_fec1_1: fec1grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-						VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-						VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-						VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
-						VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-						VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-						VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-						VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-						VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-						>;
-					};
-				};
-
-				i2c0 {
-					pinctrl_i2c0_1: i2c0grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTB14__I2C0_SCL	0x30d3
-						VF610_PAD_PTB15__I2C0_SDA	0x30d3
-						>;
-					};
-				};
-
-				pwm0 {
-					pinctrl_pwm0_1: pwm0grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTB0__FTM0_CH0	0x1582
-						VF610_PAD_PTB1__FTM0_CH1	0x1582
-						VF610_PAD_PTB2__FTM0_CH2	0x1582
-						VF610_PAD_PTB3__FTM0_CH3	0x1582
-						VF610_PAD_PTB6__FTM0_CH6	0x1582
-						VF610_PAD_PTB7__FTM0_CH7	0x1582
-						>;
-					};
-				};
-
-				qspi0 {
-					pinctrl_qspi0_1: qspi0grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTD0__QSPI0_A_QSCK	0x307b
-						VF610_PAD_PTD1__QSPI0_A_CS0	0x307f
-						VF610_PAD_PTD2__QSPI0_A_DATA3	0x3073
-						VF610_PAD_PTD3__QSPI0_A_DATA2	0x3073
-						VF610_PAD_PTD4__QSPI0_A_DATA1	0x3073
-						VF610_PAD_PTD5__QSPI0_A_DATA0	0x307b
-						VF610_PAD_PTD7__QSPI0_B_QSCK	0x307b
-						VF610_PAD_PTD8__QSPI0_B_CS0	0x307f
-						VF610_PAD_PTD9__QSPI0_B_DATA3	0x3073
-						VF610_PAD_PTD10__QSPI0_B_DATA2	0x3073
-						VF610_PAD_PTD11__QSPI0_B_DATA1	0x3073
-						VF610_PAD_PTD12__QSPI0_B_DATA0	0x307b
-						>;
-					};
-				};
-
-				sai2 {
-					pinctrl_sai2_1: sai2grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTA16__SAI2_TX_BCLK	0x02ed
-						VF610_PAD_PTA18__SAI2_TX_DATA	0x02ee
-						VF610_PAD_PTA19__SAI2_TX_SYNC	0x02ed
-						VF610_PAD_PTA21__SAI2_RX_BCLK	0x02ed
-						VF610_PAD_PTA22__SAI2_RX_DATA	0x02ed
-						VF610_PAD_PTA23__SAI2_RX_SYNC	0x02ed
-						VF610_PAD_PTB18__EXT_AUDIO_MCLK	0x02ed
-						>;
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1_1: uart1grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTB4__UART1_TX	0x21a2
-						VF610_PAD_PTB5__UART1_RX	0x21a1
-						>;
-					};
-				};
-
-				usbvbus {
-					pinctrl_usbvbus_1: usbvbusgrp_1 {
-						fsl,pins = <
-						VF610_PAD_PTA24__USB1_VBUS_EN	0x219c
-						VF610_PAD_PTA16__USB0_VBUS_EN	0x219c
-						>;
-					};
-				};
-
 			};
 
 			gpio1: gpio@40049000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x40049000 0x1000 0x400ff000 0x40>;
-				interrupts = <0 107 0x04>;
+				interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -361,7 +244,7 @@
 			gpio2: gpio@4004a000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x4004a000 0x1000 0x400ff040 0x40>;
-				interrupts = <0 108 0x04>;
+				interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -372,7 +255,7 @@
 			gpio3: gpio@4004b000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x4004b000 0x1000 0x400ff080 0x40>;
-				interrupts = <0 109 0x04>;
+				interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -383,7 +266,7 @@
 			gpio4: gpio@4004c000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
-				interrupts = <0 110 0x04>;
+				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -394,7 +277,7 @@
 			gpio5: gpio@4004d000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x4004d000 0x1000 0x400ff100 0x40>;
-				interrupts = <0 111 0x04>;
+				interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -412,9 +295,12 @@
 				#size-cells = <0>;
 				compatible = "fsl,vf610-i2c";
 				reg = <0x40066000 0x1000>;
-				interrupts =<0 71 0x04>;
+				interrupts =<0 71 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_I2C0>;
 				clock-names = "ipg";
+				dmas = <&edma0 0 50>,
+					<&edma0 0 51>;
+				dma-names = "rx","tx";
 				status = "disabled";
 			};
 
@@ -432,10 +318,25 @@
 			reg = <0x40080000 0x80000>;
 			ranges;
 
+			edma1: dma-controller@40098000 {
+				#dma-cells = <2>;
+				compatible = "fsl,vf610-edma";
+				reg = <0x40098000 0x2000>,
+					<0x400a1000 0x1000>,
+					<0x400a2000 0x1000>;
+				interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>,
+						<0 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma-tx", "edma-err";
+				dma-channels = <32>;
+				clock-names = "dmamux0", "dmamux1";
+				clocks = <&clks VF610_CLK_DMAMUX2>,
+					<&clks VF610_CLK_DMAMUX3>;
+			};
+
 			uart4: serial@400a9000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x400a9000 0x1000>;
-				interrupts = <0 65 0x04>;
+				interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART4>;
 				clock-names = "ipg";
 				status = "disabled";
@@ -444,16 +345,49 @@
 			uart5: serial@400aa000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x400aa000 0x1000>;
-				interrupts = <0 66 0x04>;
+				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART5>;
 				clock-names = "ipg";
 				status = "disabled";
 			};
 
+			adc1: adc@400bb000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x400bb000 0x1000>;
+				interrupts = <0 54 0x04>;
+				clocks = <&clks VF610_CLK_ADC1>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			esdhc1: esdhc@400b2000 {
+				compatible = "fsl,imx53-esdhc";
+				reg = <0x400b2000 0x4000>;
+				interrupts = <0 28 0x04>;
+				clocks = <&clks VF610_CLK_IPG_BUS>,
+					<&clks VF610_CLK_PLATFORM_BUS>,
+					<&clks VF610_CLK_ESDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			ftm: ftm@400b8000 {
+				compatible = "fsl,ftm-timer";
+				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "ftm-evt", "ftm-src",
+					"ftm-evt-counter-en", "ftm-src-counter-en";
+				clocks = <&clks VF610_CLK_FTM2>,
+					<&clks VF610_CLK_FTM3>,
+					<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
+					<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
 			fec0: ethernet@400d0000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;
-				interrupts = <0 78 0x04>;
+				interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ENET0>,
 					<&clks VF610_CLK_ENET0>,
 					<&clks VF610_CLK_ENET>;
@@ -464,7 +398,7 @@
 			fec1: ethernet@400d1000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d1000 0x1000>;
-				interrupts = <0 79 0x04>;
+				interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ENET1>,
 					<&clks VF610_CLK_ENET1>,
 					<&clks VF610_CLK_ENET>;
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 8b67b19392ec..760bbc463c5b 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2011 Xilinx
+ *  Copyright (C) 2011 - 2014 Xilinx
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -24,6 +24,14 @@
 			device_type = "cpu";
 			reg = <0>;
 			clocks = <&clkc 3>;
+			clock-latency = <1000>;
+			cpu0-supply = <&regulator_vccpint>;
+			operating-points = <
+				/* kHz    uV */
+				666667  1000000
+				333334  1000000
+				222223  1000000
+			>;
 		};
 
 		cpu@1 {
@@ -41,6 +49,15 @@
 		reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
 	};
 
+	regulator_vccpint: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCPINT";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	amba {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -48,10 +65,31 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		i2c0: i2c@e0004000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 38>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 25 4>;
+			reg = <0xe0004000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@e0005000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 39>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 48 4>;
+			reg = <0xe0005000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		intc: interrupt-controller@f8f01000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
-			#address-cells = <1>;
 			interrupt-controller;
 			reg = <0xF8F01000 0x1000>,
 			      <0xF8F00100 0x100>;
@@ -66,7 +104,7 @@
 			cache-level = <2>;
 		};
 
-		uart0: uart@e0000000 {
+		uart0: serial@e0000000 {
 			compatible = "xlnx,xuartps";
 			status = "disabled";
 			clocks = <&clkc 23>, <&clkc 40>;
@@ -75,7 +113,7 @@
 			interrupts = <0 27 4>;
 		};
 
-		uart1: uart@e0001000 {
+		uart1: serial@e0001000 {
 			compatible = "xlnx,xuartps";
 			status = "disabled";
 			clocks = <&clkc 24>, <&clkc 41>;
@@ -102,7 +140,7 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 		};
 
-		sdhci0: ps7-sdhci@e0100000 {
+		sdhci0: sdhci@e0100000 {
 			compatible = "arasan,sdhci-8.9a";
 			status = "disabled";
 			clock-names = "clk_xin", "clk_ahb";
@@ -112,7 +150,7 @@
 			reg = <0xe0100000 0x1000>;
 		} ;
 
-		sdhci1: ps7-sdhci@e0101000 {
+		sdhci1: sdhci@e0101000 {
 			compatible = "arasan,sdhci-8.9a";
 			status = "disabled";
 			clock-names = "clk_xin", "clk_ahb";
@@ -123,32 +161,36 @@
 		} ;
 
 		slcr: slcr@f8000000 {
-			compatible = "xlnx,zynq-slcr";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,zynq-slcr", "syscon";
 			reg = <0xF8000000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				clkc: clkc {
-					#clock-cells = <1>;
-					compatible = "xlnx,ps7-clkc";
-					ps-clk-frequency = <33333333>;
-					clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
-							"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
-							"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
-							"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
-							"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
-							"dma", "usb0_aper", "usb1_aper", "gem0_aper",
-							"gem1_aper", "sdio0_aper", "sdio1_aper",
-							"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
-							"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
-							"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
-							"dbg_trc", "dbg_apb";
-				};
+			ranges;
+			clkc: clkc@100 {
+				#clock-cells = <1>;
+				compatible = "xlnx,ps7-clkc";
+				ps-clk-frequency = <33333333>;
+				fclk-enable = <0>;
+				clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+						"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+						"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+						"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+						"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+						"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+						"gem1_aper", "sdio0_aper", "sdio1_aper",
+						"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+						"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+						"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+						"dbg_trc", "dbg_apb";
+				reg = <0x100 0x100>;
 			};
 		};
 
+		devcfg: devcfg@f8007000 {
+			compatible = "xlnx,zynq-devcfg-1.0";
+			reg = <0xf8007000 0x100>;
+		} ;
+
 		global_timer: timer@f8f00200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0xf8f00200 0x20>;
@@ -157,26 +199,27 @@
 			clocks = <&clkc 4>;
 		};
 
-		ttc0: ttc0@f8001000 {
+		ttc0: timer@f8001000 {
 			interrupt-parent = <&intc>;
-			interrupts = < 0 10 4 0 11 4 0 12 4 >;
+			interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
 			compatible = "cdns,ttc";
 			clocks = <&clkc 6>;
 			reg = <0xF8001000 0x1000>;
 		};
 
-		ttc1: ttc1@f8002000 {
+		ttc1: timer@f8002000 {
 			interrupt-parent = <&intc>;
-			interrupts = < 0 37 4 0 38 4 0 39 4 >;
+			interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
 			compatible = "cdns,ttc";
 			clocks = <&clkc 6>;
 			reg = <0xF8002000 0x1000>;
 		};
-		scutimer: scutimer@f8f00600 {
+
+		scutimer: timer@f8f00600 {
 			interrupt-parent = <&intc>;
-			interrupts = < 1 13 0x301 >;
+			interrupts = <1 13 0x301>;
 			compatible = "arm,cortex-a9-twd-timer";
-			reg = < 0xf8f00600 0x20 >;
+			reg = <0xf8f00600 0x20>;
 			clocks = <&clkc 4>;
 		} ;
 	};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index c913f77a21eb..5e09cee33d42 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -34,6 +34,82 @@
 	phy-mode = "rgmii";
 };
 
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	i2cswitch@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "at,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			hwmon@52 {
+				compatible = "ti,ucd9248";
+				reg = <52>;
+			};
+			hwmon@53 {
+				compatible = "ti,ucd9248";
+				reg = <53>;
+			};
+			hwmon@54 {
+				compatible = "ti,ucd9248";
+				reg = <54>;
+			};
+		};
+	};
+};
+
 &sdhci0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 88f62c50382e..4cc9913078cd 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -35,6 +35,74 @@
 	phy-mode = "rgmii";
 };
 
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	i2cswitch@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "at,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			ucd90120@65 {
+				compatible = "ti,ucd90120";
+				reg = <0x65>;
+			};
+		};
+	};
+};
+
 &sdhci0 {
 	status = "okay";
 };
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 4bdc41622c36..70b1eff477b3 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
 obj-$(CONFIG_PCI_HOST_ITE8152)  += it8152.o
 obj-$(CONFIG_ARM_TIMER_SP804)	+= timer-sp.o
 obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
+CFLAGS_REMOVE_mcpm_entry.o	= -pg
 AFLAGS_mcpm_head.o		:= -march=armv7-a
 AFLAGS_vlock.o			:= -march=armv7-a
 obj-$(CONFIG_TI_PRIV_EDMA)	+= edma.o
diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c
index 5774b6ea7ad5..490f3dced749 100644
--- a/arch/arm/common/bL_switcher.c
+++ b/arch/arm/common/bL_switcher.c
@@ -433,8 +433,12 @@ static void bL_switcher_restore_cpus(void)
 {
 	int i;
 
-	for_each_cpu(i, &bL_switcher_removed_logical_cpus)
-		cpu_up(i);
+	for_each_cpu(i, &bL_switcher_removed_logical_cpus) {
+		struct device *cpu_dev = get_cpu_device(i);
+		int ret = device_online(cpu_dev);
+		if (ret)
+			dev_err(cpu_dev, "switcher: unable to restore CPU\n");
+	}
 }
 
 static int bL_switcher_halve_cpus(void)
@@ -521,7 +525,7 @@ static int bL_switcher_halve_cpus(void)
 			continue;
 		}
 
-		ret = cpu_down(i);
+		ret = device_offline(get_cpu_device(i));
 		if (ret) {
 			bL_switcher_restore_cpus();
 			return ret;
@@ -797,10 +801,8 @@ static int __init bL_switcher_init(void)
 {
 	int ret;
 
-	if (MAX_NR_CLUSTERS != 2) {
-		pr_err("%s: only dual cluster systems are supported\n", __func__);
-		return -EINVAL;
-	}
+	if (!mcpm_is_available())
+		return -ENODEV;
 
 	cpu_notifier(bL_switcher_hotplug_callback, 0);
 
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 41bca32409fc..485be42519b9 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -102,7 +102,13 @@
 #define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
 
 #define EDMA_DCHMAP	0x0100  /* 64 registers */
-#define CHMAP_EXIST	BIT(24)
+
+/* CCCFG register */
+#define GET_NUM_DMACH(x)	(x & 0x7) /* bits 0-2 */
+#define GET_NUM_PAENTRY(x)	((x & 0x7000) >> 12) /* bits 12-14 */
+#define GET_NUM_EVQUE(x)	((x & 0x70000) >> 16) /* bits 16-18 */
+#define GET_NUM_REGN(x)		((x & 0x300000) >> 20) /* bits 20-21 */
+#define CHMAP_EXIST		BIT(24)
 
 #define EDMA_MAX_DMACH           64
 #define EDMA_MAX_PARAMENTRY     512
@@ -233,7 +239,6 @@ struct edma {
 	unsigned	num_region;
 	unsigned	num_slots;
 	unsigned	num_tc;
-	unsigned	num_cc;
 	enum dma_event_q 	default_queue;
 
 	/* list of channels with no even trigger; terminated by "-1" */
@@ -290,12 +295,6 @@ static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
 			~(0x7 << bit), queue_no << bit);
 }
 
-static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no)
-{
-	int bit = queue_no * 4;
-	edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
-}
-
 static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
 		int priority)
 {
@@ -994,29 +993,23 @@ void edma_set_dest(unsigned slot, dma_addr_t dest_port,
 EXPORT_SYMBOL(edma_set_dest);
 
 /**
- * edma_get_position - returns the current transfer points
+ * edma_get_position - returns the current transfer point
  * @slot: parameter RAM slot being examined
- * @src: pointer to source port position
- * @dst: pointer to destination port position
+ * @dst:  true selects the dest position, false the source
  *
- * Returns current source and destination addresses for a particular
- * parameter RAM slot.  Its channel should not be active when this is called.
+ * Returns the position of the current active slot
  */
-void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
+dma_addr_t edma_get_position(unsigned slot, bool dst)
 {
-	struct edmacc_param temp;
-	unsigned ctlr;
+	u32 offs, ctlr = EDMA_CTLR(slot);
 
-	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	edma_read_slot(EDMA_CTLR_CHAN(ctlr, slot), &temp);
-	if (src != NULL)
-		*src = temp.src;
-	if (dst != NULL)
-		*dst = temp.dst;
+	offs = PARM_OFFSET(slot);
+	offs += dst ? PARM_DST : PARM_SRC;
+
+	return edma_read(ctlr, offs);
 }
-EXPORT_SYMBOL(edma_get_position);
 
 /**
  * edma_set_src_index - configure DMA source address indexing
@@ -1421,57 +1414,101 @@ void edma_clear_event(unsigned channel)
 }
 EXPORT_SYMBOL(edma_clear_event);
 
-#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
-
-static int edma_of_read_u32_to_s16_array(const struct device_node *np,
-					 const char *propname, s16 *out_values,
-					 size_t sz)
+static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
+			      struct edma *edma_cc)
 {
-	int ret;
+	int i;
+	u32 value, cccfg;
+	s8 (*queue_priority_map)[2];
 
-	ret = of_property_read_u16_array(np, propname, out_values, sz);
-	if (ret)
-		return ret;
+	/* Decode the eDMA3 configuration from CCCFG register */
+	cccfg = edma_read(0, EDMA_CCCFG);
+
+	value = GET_NUM_REGN(cccfg);
+	edma_cc->num_region = BIT(value);
+
+	value = GET_NUM_DMACH(cccfg);
+	edma_cc->num_channels = BIT(value + 1);
+
+	value = GET_NUM_PAENTRY(cccfg);
+	edma_cc->num_slots = BIT(value + 4);
 
-	/* Terminate it */
-	*out_values++ = -1;
-	*out_values++ = -1;
+	value = GET_NUM_EVQUE(cccfg);
+	edma_cc->num_tc = value + 1;
+
+	dev_dbg(dev, "eDMA3 HW configuration (cccfg: 0x%08x):\n", cccfg);
+	dev_dbg(dev, "num_region: %u\n", edma_cc->num_region);
+	dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels);
+	dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots);
+	dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc);
+
+	/* Nothing need to be done if queue priority is provided */
+	if (pdata->queue_priority_mapping)
+		return 0;
+
+	/*
+	 * Configure TC/queue priority as follows:
+	 * Q0 - priority 0
+	 * Q1 - priority 1
+	 * Q2 - priority 2
+	 * ...
+	 * The meaning of priority numbers: 0 highest priority, 7 lowest
+	 * priority. So Q0 is the highest priority queue and the last queue has
+	 * the lowest priority.
+	 */
+	queue_priority_map = devm_kzalloc(dev,
+					  (edma_cc->num_tc + 1) * sizeof(s8),
+					  GFP_KERNEL);
+	if (!queue_priority_map)
+		return -ENOMEM;
+
+	for (i = 0; i < edma_cc->num_tc; i++) {
+		queue_priority_map[i][0] = i;
+		queue_priority_map[i][1] = i;
+	}
+	queue_priority_map[i][0] = -1;
+	queue_priority_map[i][1] = -1;
+
+	pdata->queue_priority_mapping = queue_priority_map;
+	pdata->default_queue = 0;
 
 	return 0;
 }
 
-static int edma_xbar_event_map(struct device *dev,
-			       struct device_node *node,
-			       struct edma_soc_info *pdata, int len)
+#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
+
+static int edma_xbar_event_map(struct device *dev, struct device_node *node,
+			       struct edma_soc_info *pdata, size_t sz)
 {
-	int ret, i;
+	const char pname[] = "ti,edma-xbar-event-map";
 	struct resource res;
 	void __iomem *xbar;
-	const s16 (*xbar_chans)[2];
+	s16 (*xbar_chans)[2];
+	size_t nelm = sz / sizeof(s16);
 	u32 shift, offset, mux;
+	int ret, i;
 
-	xbar_chans = devm_kzalloc(dev,
-				  len/sizeof(s16) + 2*sizeof(s16),
-				  GFP_KERNEL);
+	xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL);
 	if (!xbar_chans)
 		return -ENOMEM;
 
 	ret = of_address_to_resource(node, 1, &res);
 	if (ret)
-		return -EIO;
+		return -ENOMEM;
 
 	xbar = devm_ioremap(dev, res.start, resource_size(&res));
 	if (!xbar)
 		return -ENOMEM;
 
-	ret = edma_of_read_u32_to_s16_array(node,
-					    "ti,edma-xbar-event-map",
-					    (s16 *)xbar_chans,
-					    len/sizeof(u32));
+	ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm);
 	if (ret)
 		return -EIO;
 
-	for (i = 0; xbar_chans[i][0] != -1; i++) {
+	/* Invalidate last entry for the other user of this mess */
+	nelm >>= 1;
+	xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1;
+
+	for (i = 0; i < nelm; i++) {
 		shift = (xbar_chans[i][1] & 0x03) << 3;
 		offset = xbar_chans[i][1] & 0xfffffffc;
 		mux = readl(xbar + offset);
@@ -1480,8 +1517,7 @@ static int edma_xbar_event_map(struct device *dev,
 		writel(mux, (xbar + offset));
 	}
 
-	pdata->xbar_chans = xbar_chans;
-
+	pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
 	return 0;
 }
 
@@ -1489,65 +1525,16 @@ static int edma_of_parse_dt(struct device *dev,
 			    struct device_node *node,
 			    struct edma_soc_info *pdata)
 {
-	int ret = 0, i;
-	u32 value;
+	int ret = 0;
 	struct property *prop;
 	size_t sz;
 	struct edma_rsv_info *rsv_info;
-	s8 (*queue_tc_map)[2], (*queue_priority_map)[2];
-
-	memset(pdata, 0, sizeof(struct edma_soc_info));
-
-	ret = of_property_read_u32(node, "dma-channels", &value);
-	if (ret < 0)
-		return ret;
-	pdata->n_channel = value;
-
-	ret = of_property_read_u32(node, "ti,edma-regions", &value);
-	if (ret < 0)
-		return ret;
-	pdata->n_region = value;
-
-	ret = of_property_read_u32(node, "ti,edma-slots", &value);
-	if (ret < 0)
-		return ret;
-	pdata->n_slot = value;
-
-	pdata->n_cc = 1;
 
 	rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
 	if (!rsv_info)
 		return -ENOMEM;
 	pdata->rsv = rsv_info;
 
-	queue_tc_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
-	if (!queue_tc_map)
-		return -ENOMEM;
-
-	for (i = 0; i < 3; i++) {
-		queue_tc_map[i][0] = i;
-		queue_tc_map[i][1] = i;
-	}
-	queue_tc_map[i][0] = -1;
-	queue_tc_map[i][1] = -1;
-
-	pdata->queue_tc_mapping = queue_tc_map;
-
-	queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
-	if (!queue_priority_map)
-		return -ENOMEM;
-
-	for (i = 0; i < 3; i++) {
-		queue_priority_map[i][0] = i;
-		queue_priority_map[i][1] = i;
-	}
-	queue_priority_map[i][0] = -1;
-	queue_priority_map[i][1] = -1;
-
-	pdata->queue_priority_mapping = queue_priority_map;
-
-	pdata->default_queue = 0;
-
 	prop = of_find_property(node, "ti,edma-xbar-event-map", &sz);
 	if (prop)
 		ret = edma_xbar_event_map(dev, node, pdata, sz);
@@ -1574,6 +1561,7 @@ static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
 		return ERR_PTR(ret);
 
 	dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
+	dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap);
 	of_dma_controller_register(dev->of_node, of_dma_simple_xlate,
 				   &edma_filter_info);
 
@@ -1592,7 +1580,6 @@ static int edma_probe(struct platform_device *pdev)
 	struct edma_soc_info	**info = pdev->dev.platform_data;
 	struct edma_soc_info    *ninfo[EDMA_MAX_CC] = {NULL};
 	s8		(*queue_priority_mapping)[2];
-	s8		(*queue_tc_mapping)[2];
 	int			i, j, off, ln, found = 0;
 	int			status = -1;
 	const s16		(*rsv_chans)[2];
@@ -1603,7 +1590,6 @@ static int edma_probe(struct platform_device *pdev)
 	struct resource		*r[EDMA_MAX_CC] = {NULL};
 	struct resource		res[EDMA_MAX_CC];
 	char			res_name[10];
-	char			irq_name[10];
 	struct device_node	*node = pdev->dev.of_node;
 	struct device		*dev = &pdev->dev;
 	int			ret;
@@ -1668,12 +1654,10 @@ static int edma_probe(struct platform_device *pdev)
 		if (!edma_cc[j])
 			return -ENOMEM;
 
-		edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
-							EDMA_MAX_DMACH);
-		edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot,
-							EDMA_MAX_PARAMENTRY);
-		edma_cc[j]->num_cc = min_t(unsigned, info[j]->n_cc,
-							EDMA_MAX_CC);
+		/* Get eDMA3 configuration from IP */
+		ret = edma_setup_from_hw(dev, info[j], edma_cc[j]);
+		if (ret)
+			return ret;
 
 		edma_cc[j]->default_queue = info[j]->default_queue;
 
@@ -1725,14 +1709,21 @@ static int edma_probe(struct platform_device *pdev)
 
 		if (node) {
 			irq[j] = irq_of_parse_and_map(node, 0);
+			err_irq[j] = irq_of_parse_and_map(node, 2);
 		} else {
+			char irq_name[10];
+
 			sprintf(irq_name, "edma%d", j);
 			irq[j] = platform_get_irq_byname(pdev, irq_name);
+
+			sprintf(irq_name, "edma%d_err", j);
+			err_irq[j] = platform_get_irq_byname(pdev, irq_name);
 		}
 		edma_cc[j]->irq_res_start = irq[j];
-		status = devm_request_irq(&pdev->dev, irq[j],
-					  dma_irq_handler, 0, "edma",
-					  &pdev->dev);
+		edma_cc[j]->irq_res_end = err_irq[j];
+
+		status = devm_request_irq(dev, irq[j], dma_irq_handler, 0,
+					  "edma", dev);
 		if (status < 0) {
 			dev_dbg(&pdev->dev,
 				"devm_request_irq %d failed --> %d\n",
@@ -1740,16 +1731,8 @@ static int edma_probe(struct platform_device *pdev)
 			return status;
 		}
 
-		if (node) {
-			err_irq[j] = irq_of_parse_and_map(node, 2);
-		} else {
-			sprintf(irq_name, "edma%d_err", j);
-			err_irq[j] = platform_get_irq_byname(pdev, irq_name);
-		}
-		edma_cc[j]->irq_res_end = err_irq[j];
-		status = devm_request_irq(&pdev->dev, err_irq[j],
-					  dma_ccerr_handler, 0,
-					  "edma_error", &pdev->dev);
+		status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0,
+					  "edma_error", dev);
 		if (status < 0) {
 			dev_dbg(&pdev->dev,
 				"devm_request_irq %d failed --> %d\n",
@@ -1760,14 +1743,8 @@ static int edma_probe(struct platform_device *pdev)
 		for (i = 0; i < edma_cc[j]->num_channels; i++)
 			map_dmach_queue(j, i, info[j]->default_queue);
 
-		queue_tc_mapping = info[j]->queue_tc_mapping;
 		queue_priority_mapping = info[j]->queue_priority_mapping;
 
-		/* Event queue to TC mapping */
-		for (i = 0; queue_tc_mapping[i][0] != -1; i++)
-			map_queue_tc(j, queue_tc_mapping[i][0],
-					queue_tc_mapping[i][1]);
-
 		/* Event queue priority mapping */
 		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
 			assign_priority_to_queue(j,
@@ -1780,7 +1757,7 @@ static int edma_probe(struct platform_device *pdev)
 		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
 			map_dmach_param(j);
 
-		for (i = 0; i < info[j]->n_region; i++) {
+		for (i = 0; i < edma_cc[j]->num_region; i++) {
 			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
 			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
 			edma_write_array(j, EDMA_QRAE, i, 0x0);
diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
index 1e361abc29eb..f91136ab447e 100644
--- a/arch/arm/common/mcpm_entry.c
+++ b/arch/arm/common/mcpm_entry.c
@@ -48,6 +48,11 @@ int __init mcpm_platform_register(const struct mcpm_platform_ops *ops)
 	return 0;
 }
 
+bool mcpm_is_available(void)
+{
+	return (platform_ops) ? true : false;
+}
+
 int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster)
 {
 	if (!platform_ops)
@@ -101,14 +106,14 @@ void mcpm_cpu_power_down(void)
 	BUG();
 }
 
-int mcpm_cpu_power_down_finish(unsigned int cpu, unsigned int cluster)
+int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster)
 {
 	int ret;
 
-	if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down_finish))
+	if (WARN_ON_ONCE(!platform_ops || !platform_ops->wait_for_powerdown))
 		return -EUNATCH;
 
-	ret = platform_ops->power_down_finish(cpu, cluster);
+	ret = platform_ops->wait_for_powerdown(cpu, cluster);
 	if (ret)
 		pr_warn("%s: cpu %u, cluster %u failed to power down (%d)\n",
 			__func__, cpu, cluster, ret);
diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c
index 177251a4dd9a..92e54d7c6f46 100644
--- a/arch/arm/common/mcpm_platsmp.c
+++ b/arch/arm/common/mcpm_platsmp.c
@@ -62,7 +62,7 @@ static int mcpm_cpu_kill(unsigned int cpu)
 
 	cpu_to_pcpu(cpu, &pcpu, &pcluster);
 
-	return !mcpm_cpu_power_down_finish(pcpu, pcluster);
+	return !mcpm_wait_for_cpu_powerdown(pcpu, pcluster);
 }
 
 static int mcpm_cpu_disable(unsigned int cpu)
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index a5c3dc38aa18..6ef146edd0cd 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -232,8 +232,6 @@ static int scoop_probe(struct platform_device *pdev)
 
 	return 0;
 
-	if (devptr->gpio.base != -1)
-		temp = gpiochip_remove(&devptr->gpio);
 err_gpio:
 	platform_set_drvdata(pdev, NULL);
 err_ioremap:
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 53c6a26b633d..fd6bff0c5b96 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -271,10 +271,14 @@ static void __init integrator_cp_of_init(struct device_node *np)
 	void __iomem *base;
 	int irq;
 	const char *name = of_get_property(np, "compatible", NULL);
+	struct clk *clk;
 
 	base = of_iomap(np, 0);
 	if (WARN_ON(!base))
 		return;
+	clk = of_clk_get(np, 0);
+	if (WARN_ON(IS_ERR(clk)))
+		return;
 
 	/* Ensure timer is disabled */
 	writel(0, base + TIMER_CTRL);
@@ -283,13 +287,13 @@ static void __init integrator_cp_of_init(struct device_node *np)
 		goto err;
 
 	if (!init_count)
-		sp804_clocksource_init(base, name);
+		__sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
 	else {
 		irq = irq_of_parse_and_map(np, 0);
 		if (irq <= 0)
 			goto err;
 
-		sp804_clockevents_init(base, irq, name);
+		__sp804_clockevents_init(base, irq, clk, name);
 	}
 
 	init_count++;
diff --git a/arch/arm/configs/ape6evm_defconfig b/arch/arm/configs/ape6evm_defconfig
index cb26c62dc722..bb396c0e5fda 100644
--- a/arch/arm/configs/ape6evm_defconfig
+++ b/arch/arm/configs/ape6evm_defconfig
@@ -48,6 +48,8 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6_SIT is not set
 CONFIG_NETFILTER=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_CADENCE is not set
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
index 9287a62de830..065adddeee3e 100644
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -58,6 +58,8 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_MD=y
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 0b4e9b5210d8..300ded9acbe9 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -16,10 +16,12 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91RM9200=y
 CONFIG_SOC_AT91SAM9260=y
+CONFIG_SOC_AT91SAM9261=y
 CONFIG_SOC_AT91SAM9263=y
 CONFIG_SOC_AT91SAM9G45=y
 CONFIG_SOC_AT91SAM9X5=y
 CONFIG_SOC_AT91SAM9N12=y
+CONFIG_SOC_AT91SAM9RL=y
 CONFIG_MACH_AT91RM9200_DT=y
 CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_TIMER_HZ=128
@@ -119,6 +121,7 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
 # CONFIG_SERIO is not set
 CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_ATMEL=y
diff --git a/arch/arm/configs/at91sam9260_9g20_defconfig b/arch/arm/configs/at91sam9260_9g20_defconfig
index 2cd832918e9c..c4c160fc8791 100644
--- a/arch/arm/configs/at91sam9260_9g20_defconfig
+++ b/arch/arm/configs/at91sam9260_9g20_defconfig
@@ -3,6 +3,7 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -30,15 +31,12 @@ CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_SLOW_CLOCK=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 CONFIG_AUTO_ZRELADDR=y
-CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -57,15 +55,14 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT25=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
@@ -112,8 +109,6 @@ CONFIG_SND_PCM_OSS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
index e181a50fd65a..c6661a60025d 100644
--- a/arch/arm/configs/at91sam9g45_defconfig
+++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -83,7 +83,6 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
-CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_ATMEL=y
@@ -146,6 +145,8 @@ CONFIG_DMADEVICES=y
 CONFIG_AT_HDMAC=y
 CONFIG_DMATEST=m
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_AT91_ADC=y
 CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_VFAT_FS=y
diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig
index 7b6f131cecd6..5d7797d43d23 100644
--- a/arch/arm/configs/at91sam9rl_defconfig
+++ b/arch/arm/configs/at91sam9rl_defconfig
@@ -1,8 +1,8 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -14,20 +14,23 @@ CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9RL=y
 CONFIG_MACH_AT91SAM9RLEK=y
 # CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
+CONFIG_AUTO_ZRELADDR=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
@@ -42,7 +45,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
 # CONFIG_SERIO is not set
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
@@ -62,10 +64,13 @@ CONFIG_MMC=y
 CONFIG_MMC_ATMELMCI=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_IIO=y
+CONFIG_AT91_ADC=y
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig
new file mode 100644
index 000000000000..d3260d7d5af1
--- /dev/null
+++ b/arch/arm/configs/axm55xx_defconfig
@@ -0,0 +1,248 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_ARCH_AXXIA=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_ARM_LPAE=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_643719=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_754327=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_ERRATA_798181=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_AXXIA=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_HIGHMEM=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_BRIDGE=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+CONFIG_TUN=y
+CONFIG_VETH=y
+CONFIG_VIRTIO_NET=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_AXXIA=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_DP83640_PHY=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_AXXIA=y
+CONFIG_SENSORS_ADT7475=y
+CONFIG_SENSORS_JC42=y
+CONFIG_SENSORS_LM75=y
+CONFIG_PMBUS=y
+CONFIG_SENSORS_LTC2978=y
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_ORTEK=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_AXXIA=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_DMADEVICES=y
+CONFIG_PL330_DMA=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_MAILBOX=y
+CONFIG_PL320_MBOX=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_FSCACHE_HISTOGRAM=y
+CONFIG_FSCACHE_DEBUG=y
+CONFIG_FSCACHE_OBJECT_LIST=y
+CONFIG_CACHEFILES=y
+CONFIG_CACHEFILES_HISTOGRAM=y
+CONFIG_ISO9660_FS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_FSCACHE=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_XCBC=y
+CONFIG_CRYPTO_SHA256=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=y
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index 5b54abbeb0b3..0494c8f229a2 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -73,8 +73,6 @@ CONFIG_SA1100_WATCHDOG=m
 CONFIG_SOUND=y
 CONFIG_SOUND_PRIME=y
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index f43392dc2dcf..0302d293fba0 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -31,6 +31,7 @@ CONFIG_OPROFILE=y
 CONFIG_JUMP_LABEL=y
 CONFIG_ARCH_MULTI_V6=y
 # CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM2835=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig
index 2519d6de0640..9d13dae99125 100644
--- a/arch/arm/configs/bcm_defconfig
+++ b/arch/arm/configs/bcm_defconfig
@@ -79,11 +79,19 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_HWMON is not set
+CONFIG_MFD_BCM590XX=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+CONFIG_REGULATOR_BCM590XX=y
+
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
@@ -97,6 +105,8 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_PWM=y
+CONFIG_PWM_BCM_KONA=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
@@ -125,7 +135,7 @@ CONFIG_CRC_ITU_T=y
 CONFIG_CRC7=y
 CONFIG_XZ_DEC=y
 CONFIG_AVERAGE=y
-CONFIG_PINCTRL_CAPRI=y
+CONFIG_PINCTRL_BCM281XX=y
 CONFIG_WATCHDOG=y
 CONFIG_BCM_KONA_WDT=y
 CONFIG_BCM_KONA_WDT_DEBUG=y
diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig
index 80cff50beb34..e816140d81c5 100644
--- a/arch/arm/configs/bockw_defconfig
+++ b/arch/arm/configs/bockw_defconfig
@@ -44,6 +44,8 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index 9e8c8316d6b0..0facf9da047c 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -15,7 +15,6 @@ CONFIG_ARCH_CDB89712=y
 CONFIG_ARCH_CLEP7312=y
 CONFIG_ARCH_EDB7211=y
 CONFIG_ARCH_P720T=y
-CONFIG_ARCH_FORTUNET=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
@@ -27,7 +26,6 @@ CONFIG_INET=y
 # CONFIG_IPV6 is not set
 CONFIG_IRDA=y
 CONFIG_IRTTY_SIR=y
-CONFIG_EP7211_DONGLE=y
 # CONFIG_WIRELESS is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
@@ -58,6 +56,7 @@ CONFIG_CS89x0_PLATFORM=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+CONFIG_SERIAL_CLPS711X=y
 CONFIG_SERIAL_CLPS711X_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig
index a93ff8da5bab..dc01c049a520 100644
--- a/arch/arm/configs/cm_x2xx_defconfig
+++ b/arch/arm/configs/cm_x2xx_defconfig
@@ -144,7 +144,6 @@ CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index f4b767256f95..7df040e91c1c 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -129,7 +129,6 @@ CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
 CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index 2ef2c5e8aaec..18c311ae1113 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -124,7 +124,6 @@ CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_SERIAL=m
 CONFIG_USB_GADGET=m
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
index b985334e42dd..be02fe2b14cb 100644
--- a/arch/arm/configs/colibri_pxa300_defconfig
+++ b/arch/arm/configs/colibri_pxa300_defconfig
@@ -47,9 +47,7 @@ CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 1fd1d1de3220..c1470a00f55a 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -172,7 +172,6 @@ CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
 CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=m
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
deleted file mode 100644
index 1571bea48bed..000000000000
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ /dev/null
@@ -1,139 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DA830=y
-CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_MACH_DA8XX_DT=y
-CONFIG_MACH_MITYOMAPL138=y
-CONFIG_MACH_OMAPL138_HAWKBOARD=y
-CONFIG_DAVINCI_RESET_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_USE_OF=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_IDLE=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
-CONFIG_NETFILTER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_EEPROM_AT24=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_LXT_PHY=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_ATKBD=m
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_XTKBD=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_VT_CONSOLE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_DAVINCI=y
-CONFIG_PINCTRL_SINGLE=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DUMMY=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_FB=y
-CONFIG_FB_DA8XX=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SOC=m
-CONFIG_SND_DAVINCI_SOC=m
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_DMADEVICES=y
-CONFIG_TI_EDMA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_XFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=m
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index ab2f7378352c..f95f72d62db7 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -20,9 +20,14 @@ CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
 CONFIG_ARCH_DAVINCI_DM365=y
+CONFIG_ARCH_DAVINCI_DA830=y
+CONFIG_ARCH_DAVINCI_DA850=y
+CONFIG_MACH_DA8XX_DT=y
 CONFIG_MACH_SFFSDR=y
 CONFIG_MACH_NEUROS_OSD2=y
 CONFIG_MACH_DM355_LEOPARD=y
+CONFIG_MACH_MITYOMAPL138=y
+CONFIG_MACH_OMAPL138_HAWKBOARD=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
 CONFIG_DAVINCI_RESET_CLOCKS=y
@@ -32,8 +37,18 @@ CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
 CONFIG_LEDS=y
+CONFIG_USE_OF=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_IDLE=y
 CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -57,6 +72,7 @@ CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_PHYSMAP=m
 CONFIG_MTD_NAND=m
 CONFIG_MTD_NAND_DAVINCI=m
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
@@ -71,6 +87,7 @@ CONFIG_TUN=m
 CONFIG_LXT_PHY=y
 CONFIG_LSI_ET1011C_PHY=y
 CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
 CONFIG_TI_DAVINCI_EMAC=y
 CONFIG_DM9000=y
 # CONFIG_NETDEV_1000 is not set
@@ -97,15 +114,21 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
 # CONFIG_HW_RANDOM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DAVINCI=y
+CONFIG_PINCTRL_SINGLE=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_WATCHDOG=y
 CONFIG_DAVINCI_WATCHDOG=m
 CONFIG_MFD_DM355EVM_MSP=y
+CONFIG_TPS6507X=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TPS6507X=y
 CONFIG_FB=y
+CONFIG_FB_DA8XX=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -134,10 +157,8 @@ CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
 CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=m
 CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_PERIPHERAL=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_MUSB_PIO_ONLY=y
 CONFIG_USB_STORAGE=m
@@ -198,3 +219,5 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_T10DIF=m
+CONFIG_GPIO_PCA953X=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index 110105476848..701677f9248c 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -37,7 +37,6 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
@@ -48,7 +47,7 @@ CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_UBI=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
@@ -80,6 +79,8 @@ CONFIG_SPI_ORION=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_DOVE_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig
index 60a21e01eb70..4560c9ca6636 100644
--- a/arch/arm/configs/em_x270_defconfig
+++ b/arch/arm/configs/em_x270_defconfig
@@ -144,7 +144,6 @@ CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 6ac5ea73bd0a..1b650c85bdd0 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -80,7 +80,6 @@ CONFIG_I2C_DEBUG_BUS=y
 CONFIG_WATCHDOG=y
 CONFIG_EP93XX_WATCHDOG=y
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
 CONFIG_USB_DYNAMIC_MINORS=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index dbe1f1c47bb0..e07a227ec0db 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -65,6 +65,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y
 CONFIG_I2C=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_I2C_EXYNOS5=y
 CONFIG_I2C_S3C2410=y
 CONFIG_DEBUG_GPIO=y
 # CONFIG_HWMON is not set
@@ -94,7 +95,7 @@ CONFIG_FONT_7x14=y
 CONFIG_LOGO=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_S5P=y
+CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_PHY=y
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 038518ab39a8..87e020f303ab 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -100,8 +100,6 @@ CONFIG_FB_CYBER2000=y
 CONFIG_SOUND=m
 # CONFIG_USB_HID is not set
 CONFIG_USB=m
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=m
 CONFIG_USB_PRINTER=m
 CONFIG_EXT2_FS=y
diff --git a/arch/arm/configs/genmai_defconfig b/arch/arm/configs/genmai_defconfig
index aa0b704f48af..d238fafb6762 100644
--- a/arch/arm/configs/genmai_defconfig
+++ b/arch/arm/configs/genmai_defconfig
@@ -50,6 +50,9 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_EEPROM_AT24=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_CORE is not set
 # CONFIG_NET_VENDOR_ARC is not set
@@ -78,7 +81,10 @@ CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=10
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_I2C_SH_MOBILE=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_RIIC=y
+CONFIG_SPI=y
+CONFIG_SPI_RSPI=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_RCAR_THERMAL=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 6309ee52ccfc..bada59d93b67 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -80,6 +80,7 @@ CONFIG_MTD_UBI=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 CONFIG_ATA=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
 CONFIG_CS89x0=y
@@ -153,6 +154,11 @@ CONFIG_USB_HID=m
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
@@ -176,7 +182,6 @@ CONFIG_RTC_DRV_MXC=y
 CONFIG_DMADEVICES=y
 CONFIG_IMX_SDMA=y
 CONFIG_IMX_DMA=y
-CONFIG_COMMON_CLK_DEBUG=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 53e82c2523eb..ef8815327e5b 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -1,4 +1,3 @@
-# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
@@ -33,18 +32,23 @@ CONFIG_MACH_PCM043=y
 CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_VPR200=y
 CONFIG_MACH_IMX51_DT=y
-CONFIG_MACH_EUKREA_CPUIMX51SD=y
 CONFIG_SOC_IMX50=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
 CONFIG_SOC_VF610=y
+CONFIG_PCI=y
+CONFIG_PCI_IMX6=y
 CONFIG_SMP=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
+CONFIG_CMA=y
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_ARM_IMX6Q_CPUFREQ=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_BINFMT_MISC=m
@@ -70,6 +74,7 @@ CONFIG_RFKILL_INPUT=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
+CONFIG_DMA_CMA=y
 CONFIG_IMX_WEIM=y
 CONFIG_CONNECTOR=y
 CONFIG_MTD=y
@@ -87,6 +92,7 @@ CONFIG_MTD_SST25L=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
 CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -165,6 +171,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
 CONFIG_REGULATOR_DA9052=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_REGULATOR_PFUZE100=y
@@ -180,12 +187,14 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_CODA=y
 CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_DRM=y
+CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_GPIO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
@@ -225,6 +234,7 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_RTC_DRV_SNVS=y
@@ -239,7 +249,7 @@ CONFIG_DRM_IMX_TVE=y
 CONFIG_DRM_IMX_LDB=y
 CONFIG_DRM_IMX_IPUV3_CORE=y
 CONFIG_DRM_IMX_IPUV3=y
-CONFIG_COMMON_CLK_DEBUG=y
+CONFIG_DRM_IMX_HDMI=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_PWM=y
 CONFIG_PWM_IMX=y
@@ -277,6 +287,7 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_PROVE_LOCKING=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 063e2ab2c8f1..1af665e847d1 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -169,7 +169,6 @@ CONFIG_SENSORS_W83781D=y
 CONFIG_WATCHDOG=y
 CONFIG_IXP4XX_WATCHDOG=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 4582e160feab..095bb52671f6 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -111,6 +111,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_PLATRAM=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_DAVINCI=y
 CONFIG_MTD_UBI=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
@@ -131,8 +132,9 @@ CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_DAVINCI_WATCHDOG=y
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
 CONFIG_USB_XHCI_HCD=y
@@ -145,6 +147,7 @@ CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
 CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_MEMORY=y
+CONFIG_TI_AEMIF=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_MSDOS_FS=y
@@ -177,3 +180,14 @@ CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRYPTO_USER_API_HASH=y
 CONFIG_CRYPTO_USER_API_SKCIPHER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_DAVINCI=y
+CONFIG_LEDS_CLASS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 2e762d94e94b..b9e480c10b10 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -61,6 +61,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ORION=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_EEPROM_AT24=y
 # CONFIG_SCSI_PROC_FS is not set
diff --git a/arch/arm/configs/koelsch_defconfig b/arch/arm/configs/koelsch_defconfig
index e248f49d5549..86faab565a96 100644
--- a/arch/arm/configs/koelsch_defconfig
+++ b/arch/arm/configs/koelsch_defconfig
@@ -8,7 +8,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
-# CONFIG_BLOCK is not set
 CONFIG_ARCH_SHMOBILE_LEGACY=y
 CONFIG_ARCH_R8A7791=y
 CONFIG_MACH_KOELSCH=y
@@ -35,7 +34,14 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_RCAR=y
+CONFIG_MTD=y
+CONFIG_MTD_M25P80=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
@@ -53,18 +59,31 @@ CONFIG_SH_ETH=y
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=20
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_RSPI=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_RCAR=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_RCAR_THERMAL=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 # CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig
deleted file mode 100644
index e42ce3756af3..000000000000
--- a/arch/arm/configs/kzm9d_defconfig
+++ /dev/null
@@ -1,89 +0,0 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_EMEV2=y
-CONFIG_MACH_KZM9D=y
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x10000000
-# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SWP_EMULATE is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
-# CONFIG_LOCAL_TIMERS is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_BLK_DEV is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EM=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_EM=y
-# CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index 9934dbc23d64..bd097d455f87 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -60,6 +60,8 @@ CONFIG_IRDA=y
 CONFIG_SH_IRDA=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
@@ -104,7 +106,6 @@ CONFIG_SND_SOC=y
 CONFIG_SND_SOC_SH4_FSI=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_R8A66597_HCD=y
 CONFIG_USB_RENESAS_USBHS=y
 CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/lager_defconfig b/arch/arm/configs/lager_defconfig
index 883443f8f4f3..58702440472a 100644
--- a/arch/arm/configs/lager_defconfig
+++ b/arch/arm/configs/lager_defconfig
@@ -49,6 +49,13 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_M25P80=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_RCAR=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_CORE is not set
 # CONFIG_NET_VENDOR_ARC is not set
@@ -81,6 +88,8 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_I2C=y
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_RSPI=y
 CONFIG_GPIO_SH_PFC=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_RCAR=y
@@ -90,8 +99,20 @@ CONFIG_RCAR_THERMAL=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_PLATFORM=y
+CONFIG_VIDEO_RCAR_VIN=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=y
 CONFIG_DRM=y
 CONFIG_DRM_RCAR_DU=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_RCAR=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig
index a61e1653fc5e..57ececba2ae6 100644
--- a/arch/arm/configs/mackerel_defconfig
+++ b/arch/arm/configs/mackerel_defconfig
@@ -42,6 +42,8 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
 CONFIG_MTD_CONCAT=y
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index f21bd405cc2a..92994f7f6fd8 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -43,6 +43,8 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index a07948a87caa..9c93f5655248 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -217,7 +217,6 @@ CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_TOPSEED=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_ACM=m
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
index c5858b9eb516..7f52dad97f51 100644
--- a/arch/arm/configs/msm_defconfig
+++ b/arch/arm/configs/msm_defconfig
@@ -17,21 +17,14 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_MSM_DT=y
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
-CONFIG_SMP=y
+CONFIG_ARCH_MSM=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_HIGHPTE=y
 CONFIG_CLEANCACHE=y
-CONFIG_CC_STACKPROTECTOR=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_AUTO_ZRELADDR=y
 CONFIG_VFP=y
-CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -79,16 +72,12 @@ CONFIG_SERIO_LIBPS2=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MSM=y
+# CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_MSM=y
 CONFIG_THERMAL=y
 CONFIG_REGULATOR=y
 CONFIG_MEDIA_SUPPORT=y
@@ -100,25 +89,17 @@ CONFIG_SND_DYNAMIC_MINORS=y
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
-CONFIG_HID_BATTERY_STRENGTH=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MSM=y
 CONFIG_USB_ACM=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_NEW_LEDS=y
 CONFIG_RTC_CLASS=y
 CONFIG_STAGING=y
-CONFIG_COMMON_CLK_QCOM=y
-CONFIG_MSM_GCC_8660=y
-CONFIG_MSM_MMCC_8960=y
-CONFIG_MSM_MMCC_8974=y
-CONFIG_MSM_IOMMU=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT3_FS=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
new file mode 100644
index 000000000000..5ebfa8bf8509
--- /dev/null
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -0,0 +1,191 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_KIRKWOOD=y
+CONFIG_ARCH_MXC=y
+CONFIG_MACH_IMX25_DT=y
+CONFIG_MACH_IMX27_DT=y
+CONFIG_ARCH_U300=y
+CONFIG_PCI_MVEBU=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_KIRKWOOD_CPUIDLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
+CONFIG_NET_PKTGEN=m
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ORION=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_EEPROM_AT24=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_MV=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_MV643XX_ETH=y
+CONFIG_R8169=y
+CONFIG_MARVELL_PHY=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_SDIO=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_NOMADIK=y
+CONFIG_SPI=y
+CONFIG_SPI_ORION=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_QNAP=y
+CONFIG_SENSORS_ADT7475=y
+CONFIG_SENSORS_LM63=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SENSORS_LM85=y
+CONFIG_THERMAL=y
+CONFIG_KIRKWOOD_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_KIRKWOOD_SOC=y
+CONFIG_SND_KIRKWOOD_SOC_T5325=y
+CONFIG_SND_SOC_ALC5623=y
+CONFIG_SND_SIMPLE_CARD=y
+# CONFIG_ABX500_CORE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_MMC=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_MVSDIO=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_S35390A=y
+CONFIG_RTC_DRV_MV=y
+CONFIG_DMADEVICES=y
+CONFIG_MV_XOR=y
+CONFIG_STAGING=y
+CONFIG_FB_XGI=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_MV_CESA=y
+CONFIG_CRC_CCITT=y
+CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index ee6982976d66..e2d62048e198 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -1,21 +1,28 @@
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_VIRT=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_375=y
+CONFIG_MACH_ARMADA_38X=y
 CONFIG_MACH_ARMADA_XP=y
+CONFIG_MACH_DOVE=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM_MOBILE=y
+CONFIG_ARCH_BCM_5301X=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_MACH_BERLIN_BG2=y
 CONFIG_MACH_BERLIN_BG2CD=y
-CONFIG_GPIO_PCA953X=y
+CONFIG_MACH_BERLIN_BG2Q=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_HI3xxx=y
 CONFIG_ARCH_KEYSTONE=y
@@ -29,8 +36,12 @@ CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
 CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
-CONFIG_SOC_DRA7XX=y
 CONFIG_SOC_AM43XX=y
+CONFIG_SOC_DRA7XX=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_MSM8X60=y
+CONFIG_ARCH_MSM8960=y
+CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_SOCFPGA=y
 CONFIG_PLAT_SPEAR=y
@@ -38,6 +49,7 @@ CONFIG_ARCH_SPEAR13XX=y
 CONFIG_MACH_SPEAR1310=y
 CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
+CONFIG_ARCH_EXYNOS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_SIRF=y
 CONFIG_ARCH_TEGRA=y
@@ -52,15 +64,16 @@ CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_UX500_DT=y
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VEXPRESS_CA9X4=y
-CONFIG_ARCH_VIRT=y
 CONFIG_ARCH_WM8850=y
 CONFIG_ARCH_ZYNQ=y
+CONFIG_NEON=y
 CONFIG_TRUSTED_FOUNDATIONS=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCI_MVEBU=y
 CONFIG_PCI_TEGRA=y
 CONFIG_SMP=y
+CONFIG_NR_CPUS=8
 CONFIG_HIGHPTE=y
 CONFIG_CMA=y
 CONFIG_ARM_APPENDED_DTB=y
@@ -86,6 +99,11 @@ CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_MCP251X=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_RFKILL=y
@@ -94,6 +112,7 @@ CONFIG_RFKILL_GPIO=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_OMAP_OCP2SCP=y
 CONFIG_MTD=y
 CONFIG_MTD_M25P80=y
@@ -101,16 +120,21 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_ICS932S401=y
 CONFIG_APDS9802ALS=y
 CONFIG_ISL29003=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_SUNXI_SID=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_SUNXI=y
 CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_SUN4I_EMAC=y
+CONFIG_MACB=y
 CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_MV643XX_ETH=y
 CONFIG_MVNETA=y
 CONFIG_KS8851=y
 CONFIG_R8169=y
@@ -141,11 +165,15 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 CONFIG_SERIAL_SIRFSOC=y
 CONFIG_SERIAL_SIRFSOC_CONSOLE=y
 CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_SERIAL_VT8500=y
 CONFIG_SERIAL_VT8500_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
@@ -159,8 +187,11 @@ CONFIG_SERIAL_ST_ASC=y
 CONFIG_SERIAL_ST_ASC_CONSOLE=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
+CONFIG_I2C_CADENCE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_EXYNOS5=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_SIRF=y
 CONFIG_I2C_TEGRA=y
@@ -169,6 +200,8 @@ CONFIG_SPI_OMAP24XX=y
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_SIRF=y
+CONFIG_SPI_SUN4I=y
+CONFIG_SPI_SUN6I=y
 CONFIG_SPI_TEGRA114=y
 CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
@@ -176,6 +209,8 @@ CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_PALMAS=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_TWL4030=y
 CONFIG_GPIO_PALMAS=y
@@ -185,13 +220,19 @@ CONFIG_BATTERY_SBS=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_SUN6I=y
 CONFIG_SENSORS_LM90=y
 CONFIG_THERMAL=y
+CONFIG_DOVE_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=y
 CONFIG_MFD_AS3722=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_SPI=y
 CONFIG_MFD_MAX8907=y
+CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS6586X=y
@@ -202,6 +243,8 @@ CONFIG_REGULATOR_AS3722=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MAX8907=y
 CONFIG_REGULATOR_PALMAS=y
+CONFIG_REGULATOR_S2MPS11=y
+CONFIG_REGULATOR_S5M8767=y
 CONFIG_REGULATOR_TPS51632=y
 CONFIG_REGULATOR_TPS62360=y
 CONFIG_REGULATOR_TPS65090=y
@@ -212,6 +255,8 @@ CONFIG_REGULATOR_VEXPRESS=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_GSPCA=y
 CONFIG_DRM=y
 CONFIG_DRM_TEGRA=y
 CONFIG_DRM_PANEL_SIMPLE=y
@@ -234,10 +279,13 @@ CONFIG_SND_SOC_TEGRA_ALC5632=y
 CONFIG_SND_SOC_TEGRA_MAX98090=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_HOST=y
@@ -252,19 +300,28 @@ CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_MMC_SDHCI_DOVE=y
 CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_MMC_SDHCI_PXAV3=y
 CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_MMC_SDHCI_S3C=y
+CONFIG_MMC_SDHCI_S3C_DMA=y
 CONFIG_MMC_SDHCI_BCM_KONA=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MMC_MVSDIO=y
+CONFIG_MMC_SUNXI=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_EXYNOS=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_HIGHBANK_MC=y
 CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AS3722=y
+CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_MAX8907=y
 CONFIG_RTC_DRV_PALMAS=y
 CONFIG_RTC_DRV_TWL4030=y
@@ -273,6 +330,7 @@ CONFIG_RTC_DRV_TPS65910=y
 CONFIG_RTC_DRV_EM3027=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_VT8500=y
+CONFIG_RTC_DRV_SUNXI=y
 CONFIG_RTC_DRV_MV=y
 CONFIG_RTC_DRV_TEGRA=y
 CONFIG_DMADEVICES=y
@@ -294,6 +352,10 @@ CONFIG_MFD_NVEC=y
 CONFIG_KEYBOARD_NVEC=y
 CONFIG_SERIO_NVEC_PS2=y
 CONFIG_NVEC_POWER=y
+CONFIG_COMMON_CLK_QCOM=y
+CONFIG_MSM_GCC_8660=y
+CONFIG_MSM_MMCC_8960=y
+CONFIG_MSM_MMCC_8974=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_MEMORY=y
@@ -303,6 +365,7 @@ CONFIG_PWM=y
 CONFIG_PWM_TEGRA=y
 CONFIG_PWM_VT8500=y
 CONFIG_OMAP_USB2=y
+CONFIG_PHY_SUN4I_USB=y
 CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 1f08219c1b3c..0dae1c1f007a 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -80,7 +80,6 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
new file mode 100644
index 000000000000..27c732fdf21e
--- /dev/null
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -0,0 +1,184 @@
+CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_KIRKWOOD=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_PCI_MVEBU=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_IDLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
+CONFIG_NET_PKTGEN=m
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ORION=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_EEPROM_AT24=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_MV=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_MV643XX_ETH=y
+CONFIG_R8169=y
+CONFIG_MARVELL_PHY=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_SDIO=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_SPI=y
+CONFIG_SPI_ORION=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_QNAP=y
+CONFIG_SENSORS_ADT7475=y
+CONFIG_SENSORS_LM63=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SENSORS_LM85=y
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_KIRKWOOD_SOC=y
+CONFIG_SND_KIRKWOOD_SOC_T5325=y
+CONFIG_SND_SOC_ALC5623=y
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_MMC=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_MVSDIO=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_S35390A=y
+CONFIG_RTC_DRV_MV=y
+CONFIG_DMADEVICES=y
+CONFIG_MV_XOR=y
+CONFIG_STAGING=y
+CONFIG_FB_XGI=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_MV_CESA=y
+CONFIG_CRC_CCITT=y
+CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_v7_defconfig
index 0f4511d2849f..e11170e37442 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -1,5 +1,6 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -10,10 +11,14 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_375=y
+CONFIG_MACH_ARMADA_38X=y
 CONFIG_MACH_ARMADA_XP=y
+CONFIG_NEON=y
 # CONFIG_CACHE_L2X0 is not set
 # CONFIG_SWP_EMULATE is not set
 CONFIG_PCI=y
+CONFIG_PCI_MSI=y
 CONFIG_PCI_MVEBU=y
 CONFIG_SMP=y
 CONFIG_AEABI=y
@@ -26,6 +31,9 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_VFP=y
 CONFIG_NET=y
 CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
 CONFIG_BT=y
 CONFIG_BT_MRVL=y
 CONFIG_BT_MRVL_SDIO=y
@@ -33,6 +41,7 @@ CONFIG_CFG80211=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
+CONFIG_AHCI_MVEBU=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_MVNETA=y
@@ -50,6 +59,7 @@ CONFIG_I2C_MV64XXX=y
 CONFIG_MTD=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -62,13 +72,22 @@ CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_KIRKWOOD_SOC=y
+CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=y
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_MVEBU=y
 CONFIG_MMC=y
+CONFIG_MMC_SDHCI_PXAV3=y
 CONFIG_MMC_MVSDIO=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_GPIO=y
@@ -93,6 +112,8 @@ CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 6150108e15de..a9f992335eb2 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -26,7 +26,6 @@ CONFIG_ARCH_MXS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
-CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -51,10 +50,10 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_M25P80=y
-# CONFIG_M25PXX_USE_FAST_READ is not set
 CONFIG_MTD_SST25L=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 # CONFIG_BLK_DEV is not set
 CONFIG_EEPROM_AT24=y
@@ -120,7 +119,6 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_MXS=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -138,7 +136,6 @@ CONFIG_DMADEVICES=y
 CONFIG_MXS_DMA=y
 CONFIG_STAGING=y
 CONFIG_MXS_LRADC=y
-CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_IIO=y
 CONFIG_IIO_SYSFS_TRIGGER=y
 CONFIG_PWM=y
@@ -180,7 +177,7 @@ CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_STRICT_DEVMEM=y
 CONFIG_DEBUG_USER=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
+CONFIG_CRYPTO_DEV_MXS_DCP=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC7=m
 CONFIG_FONTS=y
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index d7dc9922cfff..460dca4a4f98 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -68,8 +68,6 @@ CONFIG_SOUND=y
 CONFIG_SOUND_PRIME=y
 # CONFIG_USB_HID is not set
 CONFIG_USB=m
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_STORAGE=m
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index d74edbad18fc..ce541bb3c2de 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -197,8 +197,6 @@ CONFIG_SND_OMAP_SOC=y
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_PHY=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 3a0b53d225e7..59066cf0271a 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -21,6 +21,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_MULTI_V6=y
+CONFIG_POWER_AVS_OMAP=y
+CONFIG_POWER_AVS_OMAP_CLASS3=y
 CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_ARCH_OMAP2=y
@@ -28,6 +30,7 @@ CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
 CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
+CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y
@@ -41,6 +44,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
 CONFIG_KEXEC=y
 CONFIG_FPE_NWFPE=y
+CONFIG_CPU_IDLE=y
 CONFIG_BINFMT_MISC=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y
@@ -158,28 +162,34 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_TWL4030=y
 CONFIG_W1=y
 CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_AVS=y
 CONFIG_SENSORS_LM75=m
 CONFIG_THERMAL=y
 CONFIG_THERMAL_GOV_FAIR_SHARE=y
 CONFIG_THERMAL_GOV_USER_SPACE=y
+CONFIG_CPU_THERMAL=y
 CONFIG_TI_SOC_THERMAL=y
+CONFIG_TI_THERMAL=y
 CONFIG_OMAP4_THERMAL=y
 CONFIG_OMAP5_THERMAL=y
 CONFIG_DRA752_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_SYSCON=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TPS65910=y
 CONFIG_TWL6040_CORE=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_PALMAS=y
+CONFIG_REGULATOR_TI_ABB=y
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
 CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
+CONFIG_REGULATOR_PBIAS=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
@@ -214,7 +224,6 @@ CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
 CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
 CONFIG_USB_WDM=y
@@ -223,7 +232,7 @@ CONFIG_USB_DWC3=m
 CONFIG_USB_TEST=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_OMAP_USB2=y
-CONFIG_OMAP_USB3=y
+CONFIG_TI_PIPE3=y
 CONFIG_AM335X_PHY_USB=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
@@ -236,6 +245,7 @@ CONFIG_SDIO_UART=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
index 2f136c30a989..0a847d04ddc1 100644
--- a/arch/arm/configs/pcm027_defconfig
+++ b/arch/arm/configs/pcm027_defconfig
@@ -76,7 +76,6 @@ CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PXA2XX_AC97=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
new file mode 100644
index 000000000000..42ebd72799e6
--- /dev/null
+++ b/arch/arm/configs/qcom_defconfig
@@ -0,0 +1,165 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_MSM8X60=y
+CONFIG_ARCH_MSM8960=y
+CONFIG_ARCH_MSM8974=y
+CONFIG_SMP=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_CLEANCACHE=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_CFG80211=y
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_GPIO=y
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_MSM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_QUP=y
+CONFIG_SPI=y
+CONFIG_SPI_QUP=y
+CONFIG_SPMI=y
+CONFIG_PINCTRL_APQ8064=y
+CONFIG_PINCTRL_IPQ8064=y
+CONFIG_PINCTRL_MSM8X74=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_MSM=y
+CONFIG_THERMAL=y
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_FB=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_HID_BATTERY_STRENGTH=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_MSM=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_STAGING=y
+CONFIG_QCOM_GSBI=y
+CONFIG_COMMON_CLK_QCOM=y
+CONFIG_MSM_GCC_8660=y
+CONFIG_MSM_MMCC_8960=y
+CONFIG_MSM_MMCC_8974=y
+CONFIG_MSM_IOMMU=y
+CONFIG_GENERIC_PHY=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_TIMER_STATS=y
diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
index f7caa909b40d..3d833aea545a 100644
--- a/arch/arm/configs/raumfeld_defconfig
+++ b/arch/arm/configs/raumfeld_defconfig
@@ -122,7 +122,6 @@ CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
 CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index abe61bf379d2..1da5d9e48224 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -76,8 +76,10 @@ CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_VERSATILE=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_PL031=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index 7079cbe898a8..d02e9d911bb7 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -75,8 +75,10 @@ CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_VERSATILE=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_PL031=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 193448f31284..eb4d204bff47 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -324,7 +324,6 @@ CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_SOC=y
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_ACM=m
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 3a186d653dac..e2f9fa5bb54b 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -56,7 +56,6 @@ CONFIG_SND_S3C24XX_SOC=m
 CONFIG_SND_SOC_SMDK_WM9713=m
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index dc3881e07630..4414990521d3 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -122,7 +122,6 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
-CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
 # CONFIG_SERIO is not set
 CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_ATMEL=y
@@ -138,6 +137,8 @@ CONFIG_SPI_GPIO=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_SSB=m
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_ACT8865=y
 CONFIG_FB=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
new file mode 100644
index 000000000000..6d6437cbbc52
--- /dev/null
+++ b/arch/arm/configs/shmobile_defconfig
@@ -0,0 +1,143 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_EMEV2=y
+CONFIG_ARCH_R8A7790=y
+CONFIG_ARCH_R8A7791=y
+CONFIG_MACH_KOELSCH=y
+CONFIG_MACH_LAGER=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_CPU_BPREDICT_DISABLE=y
+CONFIG_PL310_ERRATA_588369=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_PCI=y
+CONFIG_PCI_RCAR_GEN2=y
+CONFIG_SMP=y
+CONFIG_SCHED_MC=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_NR_CPUS=8
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_KEXEC=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_M25P80=y
+CONFIG_EEPROM_AT24=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_RCAR=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_SH_ETH=y
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_EM=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=20
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_RSPI=y
+CONFIG_SPI_SH_MSIOF=y
+CONFIG_GPIO_EM=y
+CONFIG_GPIO_RCAR=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_RCAR_THERMAL=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_PLATFORM=y
+CONFIG_VIDEO_RCAR_VIN=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_RENESAS_VSP1=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=y
+CONFIG_DRM=y
+CONFIG_DRM_RCAR_DU=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_RCAR=y
+CONFIG_USB=y
+CONFIG_USB_RCAR_GEN2_PHY=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_RENESAS_USBHS=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_SH_MMCIF=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_SH_DMAE=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ARM_UNWIND is not set
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index 4e1ce211d43f..e3a05e8801d8 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -52,6 +52,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_STMMAC_ETH=y
+CONFIG_MICREL_PHY=y
 # CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_SERIO_SERPORT is not set
@@ -66,6 +67,9 @@ CONFIG_SERIAL_8250_DW=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT3_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
 CONFIG_VFAT_FS=y
@@ -82,3 +86,5 @@ CONFIG_DEBUG_INFO=y
 CONFIG_ENABLE_DEFAULT_TRACERS=y
 CONFIG_DEBUG_USER=y
 CONFIG_XZ_DEC=y
+CONFIG_MMC=y
+CONFIG_MMC_DW=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 2e0419d1b964..a1ede1966baf 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -166,7 +166,6 @@ CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
 CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_SL811_HCD=m
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 3e2259b60236..7209bfd62074 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -1,13 +1,17 @@
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_PERF_EVENTS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SMP=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_HIGHPTE=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -24,8 +28,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_EEPROM_SUNXI_SID=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_AHCI_SUNXI=y
 CONFIG_NETDEVICES=y
 CONFIG_SUN4I_EMAC=y
+# CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set
@@ -33,36 +42,66 @@ CONFIG_SUN4I_EMAC=y
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_RUNTIME_UARTS=8
 CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MV64XXX=y
+CONFIG_SPI=y
+CONFIG_SPI_SUN4I=y
+CONFIG_SPI_SUN6I=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SUN6I=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_MFD_AXP20X=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_MMC=y
+CONFIG_MMC_SUNXI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_COMMON_CLK_DEBUG=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_DRV_SUNXI=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PHY_SUN4I_USB=y
+CONFIG_EXT4_FS=y
+CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 71277a1591ba..7209a2caefcf 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -47,7 +47,6 @@ CONFIG_BLK_DEV_RAM_SIZE=10240
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 27d69b558c5d..fb25e2982f64 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -1,4 +1,5 @@
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -72,6 +73,11 @@ CONFIG_INET6_IPCOMP=y
 CONFIG_IPV6_MIP6=y
 CONFIG_IPV6_TUNNEL=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_MCP251X=y
 CONFIG_BT=y
 CONFIG_BT_RFCOMM=y
 CONFIG_BT_BNEP=y
@@ -86,8 +92,10 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_MTD=y
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_AD525X_DPOT=y
@@ -95,6 +103,7 @@ CONFIG_AD525X_DPOT_I2C=y
 CONFIG_ICS932S401=y
 CONFIG_APDS9802ALS=y
 CONFIG_ISL29003=y
+CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
@@ -110,6 +119,7 @@ CONFIG_USB_NET_SMSC95XX=y
 CONFIG_BRCMFMAC=m
 CONFIG_RT2X00=y
 CONFIG_RT2800USB=m
+CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_TEGRA=y
@@ -125,6 +135,7 @@ CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_TEGRA=y
 CONFIG_SPI=y
@@ -141,6 +152,7 @@ CONFIG_POWER_SUPPLY=y
 CONFIG_BATTERY_SBS=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_SENSORS_LM90=y
 CONFIG_MFD_AS3722=y
@@ -166,7 +178,8 @@ CONFIG_REGULATOR_TPS65910=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_GSPCA=y
 CONFIG_DRM=y
 CONFIG_DRM_TEGRA=y
 CONFIG_DRM_PANEL_SIMPLE=y
@@ -176,6 +189,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -217,6 +231,7 @@ CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_LEDS_TRIGGER_CAMERA=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AS3722=y
+CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_MAX8907=y
 CONFIG_RTC_DRV_PALMAS=y
 CONFIG_RTC_DRV_TPS6586X=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 3162173fa75a..932ee4e4a13a 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -165,7 +165,6 @@ CONFIG_SND_PXA2XX_AC97=y
 CONFIG_SND_USB_AUDIO=m
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=m
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index fd81a1b99cce..aaa95ab606a8 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -11,6 +11,7 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_IOSCHED_CFQ is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_U300=y
@@ -21,7 +22,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
 # CONFIG_SUSPEND is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
@@ -64,8 +64,8 @@ CONFIG_TMPFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 65f77885c167..d219d6a43238 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -1,16 +1,16 @@
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_U8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
-CONFIG_MACH_UX500_DT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PREEMPT=y
@@ -34,16 +34,22 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_NETFILTER=y
 CONFIG_PHONET=y
-# CONFIG_WIRELESS is not set
+CONFIG_CFG80211=y
+CONFIG_CFG80211_DEBUGFS=y
+CONFIG_MAC80211=y
+CONFIG_MAC80211_LEDS=y
 CONFIG_CAIF=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC911X=y
 CONFIG_SMSC_PHY=y
-# CONFIG_WLAN is not set
+CONFIG_CW1200=y
+CONFIG_CW1200_WLAN_SDIO=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -85,15 +91,12 @@ CONFIG_AB8500_USB=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_LP5521=y
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
@@ -103,6 +106,11 @@ CONFIG_STE_DMA40=y
 CONFIG_STAGING=y
 CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
 CONFIG_HSEM_U8500=y
+CONFIG_IIO=y
+CONFIG_IIO_ST_ACCEL_3AXIS=y
+CONFIG_IIO_ST_GYRO_3AXIS=y
+CONFIG_IIO_ST_MAGN_3AXIS=y
+CONFIG_IIO_ST_PRESS=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -110,8 +118,6 @@ CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_MISC_FILESYSTEMS is not set
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 073541a50e23..d52b4ffe2012 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -61,6 +61,9 @@ CONFIG_SND_ARMAACI=m
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=m
 CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_VERSATILE=y
+CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_EXT2_FS=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index d36e0d3c86ec..0d717a5eff29 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -127,7 +127,6 @@ CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PXA2XX_AC97=m
 CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_ISP116X_HCD=m
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_R8A66597_HCD=m
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index 731d4f985310..cd11da8b5123 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -132,7 +132,6 @@ CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_ACM=m
 CONFIG_USB_STORAGE=m
diff --git a/arch/arm/firmware/Kconfig b/arch/arm/firmware/Kconfig
index bb00ccf00d66..ad396af68e47 100644
--- a/arch/arm/firmware/Kconfig
+++ b/arch/arm/firmware/Kconfig
@@ -11,6 +11,7 @@ menu "Firmware options"
 config TRUSTED_FOUNDATIONS
 	bool "Trusted Foundations secure monitor support"
 	depends on ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
+	default y
 	help
 	  Some devices (including most Tegra-based consumer devices on the
 	  market) are booted with the Trusted Foundations secure monitor
@@ -20,7 +21,7 @@ config TRUSTED_FOUNDATIONS
 	  This option allows the kernel to invoke the secure monitor whenever
 	  required on devices using Trusted Foundations. See
 	  arch/arm/include/asm/trusted_foundations.h or the
-	  tl,trusted-foundations device tree binding documentation for details
+	  tlm,trusted-foundations device tree binding documentation for details
 	  on how to use it.
 
 	  Say n if you don't know what this is about.
diff --git a/arch/arm/firmware/trusted_foundations.c b/arch/arm/firmware/trusted_foundations.c
index ef1e3d8f4af0..3fb1b5a1dce9 100644
--- a/arch/arm/firmware/trusted_foundations.c
+++ b/arch/arm/firmware/trusted_foundations.c
@@ -22,6 +22,15 @@
 
 #define TF_SET_CPU_BOOT_ADDR_SMC 0xfffff200
 
+#define TF_CPU_PM		0xfffffffc
+#define TF_CPU_PM_S3		0xffffffe3
+#define TF_CPU_PM_S2		0xffffffe6
+#define TF_CPU_PM_S2_NO_MC_CLK	0xffffffe5
+#define TF_CPU_PM_S1		0xffffffe4
+#define TF_CPU_PM_S1_NOFLUSH_L2	0xffffffe7
+
+static unsigned long cpu_boot_addr;
+
 static void __naked tf_generic_smc(u32 type, u32 arg1, u32 arg2)
 {
 	asm volatile(
@@ -41,13 +50,22 @@ static void __naked tf_generic_smc(u32 type, u32 arg1, u32 arg2)
 
 static int tf_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 {
-	tf_generic_smc(TF_SET_CPU_BOOT_ADDR_SMC, boot_addr, 0);
+	cpu_boot_addr = boot_addr;
+	tf_generic_smc(TF_SET_CPU_BOOT_ADDR_SMC, cpu_boot_addr, 0);
+
+	return 0;
+}
+
+static int tf_prepare_idle(void)
+{
+	tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S1_NOFLUSH_L2, cpu_boot_addr);
 
 	return 0;
 }
 
 static const struct firmware_ops trusted_foundations_ops = {
 	.set_cpu_boot_addr = tf_set_cpu_boot_addr,
+	.prepare_idle = tf_prepare_idle,
 };
 
 void register_trusted_foundations(struct trusted_foundations_platform_data *pd)
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index 3278afe2c3ab..f5a357601983 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -7,17 +7,21 @@ generic-y += current.h
 generic-y += emergency-restart.h
 generic-y += errno.h
 generic-y += exec.h
+generic-y += hash.h
 generic-y += ioctl.h
 generic-y += ipcbuf.h
 generic-y += irq_regs.h
 generic-y += kdebug.h
 generic-y += local.h
 generic-y += local64.h
+generic-y += mcs_spinlock.h
 generic-y += msgbuf.h
 generic-y += param.h
 generic-y += parport.h
 generic-y += poll.h
+generic-y += preempt.h
 generic-y += resource.h
+generic-y += rwsem.h
 generic-y += sections.h
 generic-y += segment.h
 generic-y += sembuf.h
@@ -33,5 +37,3 @@ generic-y += termios.h
 generic-y += timex.h
 generic-y += trace_clock.h
 generic-y += unaligned.h
-generic-y += preempt.h
-generic-y += hash.h
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 5c2285160575..57f0584e8d97 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -23,6 +23,7 @@
 #include <asm/ptrace.h>
 #include <asm/domain.h>
 #include <asm/opcodes-virt.h>
+#include <asm/asm-offsets.h>
 
 #define IOMEM(x)	(x)
 
@@ -30,8 +31,8 @@
  * Endian independent macros for shifting bytes within registers.
  */
 #ifndef __ARMEB__
-#define pull            lsr
-#define push            lsl
+#define lspull          lsr
+#define lspush          lsl
 #define get_byte_0      lsl #0
 #define get_byte_1	lsr #8
 #define get_byte_2	lsr #16
@@ -41,8 +42,8 @@
 #define put_byte_2	lsl #16
 #define put_byte_3	lsl #24
 #else
-#define pull            lsl
-#define push            lsr
+#define lspull          lsl
+#define lspush          lsr
 #define get_byte_0	lsr #24
 #define get_byte_1	lsr #16
 #define get_byte_2	lsr #8
@@ -174,6 +175,47 @@
 	restore_irqs_notrace \oldcpsr
 	.endm
 
+/*
+ * Get current thread_info.
+ */
+	.macro	get_thread_info, rd
+ ARM(	mov	\rd, sp, lsr #13	)
+ THUMB(	mov	\rd, sp			)
+ THUMB(	lsr	\rd, \rd, #13		)
+	mov	\rd, \rd, lsl #13
+	.endm
+
+/*
+ * Increment/decrement the preempt count.
+ */
+#ifdef CONFIG_PREEMPT_COUNT
+	.macro	inc_preempt_count, ti, tmp
+	ldr	\tmp, [\ti, #TI_PREEMPT]	@ get preempt count
+	add	\tmp, \tmp, #1			@ increment it
+	str	\tmp, [\ti, #TI_PREEMPT]
+	.endm
+
+	.macro	dec_preempt_count, ti, tmp
+	ldr	\tmp, [\ti, #TI_PREEMPT]	@ get preempt count
+	sub	\tmp, \tmp, #1			@ decrement it
+	str	\tmp, [\ti, #TI_PREEMPT]
+	.endm
+
+	.macro	dec_preempt_count_ti, ti, tmp
+	get_thread_info \ti
+	dec_preempt_count \ti, \tmp
+	.endm
+#else
+	.macro	inc_preempt_count, ti, tmp
+	.endm
+
+	.macro	dec_preempt_count, ti, tmp
+	.endm
+
+	.macro	dec_preempt_count_ti, ti, tmp
+	.endm
+#endif
+
 #define USER(x...)				\
 9999:	x;					\
 	.pushsection __ex_table,"a";		\
@@ -270,7 +312,7 @@
  * you cannot return to the original mode.
  */
 .macro safe_svcmode_maskall reg:req
-#if __LINUX_ARM_ARCH__ >= 6
+#if __LINUX_ARM_ARCH__ >= 6 && !defined(CONFIG_CPU_V7M)
 	mrs	\reg , cpsr
 	eor	\reg, \reg, #HYP_MODE
 	tst	\reg, #MODE_MASK
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 62d2cb53b069..3040359094d9 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -60,6 +60,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	int result;
 
 	smp_mb();
+	prefetchw(&v->counter);
 
 	__asm__ __volatile__("@ atomic_add_return\n"
 "1:	ldrex	%0, [%3]\n"
@@ -99,6 +100,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	int result;
 
 	smp_mb();
+	prefetchw(&v->counter);
 
 	__asm__ __volatile__("@ atomic_sub_return\n"
 "1:	ldrex	%0, [%3]\n"
@@ -121,6 +123,7 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 	unsigned long res;
 
 	smp_mb();
+	prefetchw(&ptr->counter);
 
 	do {
 		__asm__ __volatile__("@ atomic_cmpxchg\n"
@@ -138,6 +141,33 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 	return oldval;
 }
 
+static inline int __atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int oldval, newval;
+	unsigned long tmp;
+
+	smp_mb();
+	prefetchw(&v->counter);
+
+	__asm__ __volatile__ ("@ atomic_add_unless\n"
+"1:	ldrex	%0, [%4]\n"
+"	teq	%0, %5\n"
+"	beq	2f\n"
+"	add	%1, %0, %6\n"
+"	strex	%2, %1, [%4]\n"
+"	teq	%2, #0\n"
+"	bne	1b\n"
+"2:"
+	: "=&r" (oldval), "=&r" (newval), "=&r" (tmp), "+Qo" (v->counter)
+	: "r" (&v->counter), "r" (u), "r" (a)
+	: "cc");
+
+	if (oldval != u)
+		smp_mb();
+
+	return oldval;
+}
+
 #else /* ARM_ARCH_6 */
 
 #ifdef CONFIG_SMP
@@ -186,10 +216,6 @@ static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 	return ret;
 }
 
-#endif /* __LINUX_ARM_ARCH__ */
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
 static inline int __atomic_add_unless(atomic_t *v, int a, int u)
 {
 	int c, old;
@@ -200,6 +226,10 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u)
 	return c;
 }
 
+#endif /* __LINUX_ARM_ARCH__ */
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
 #define atomic_inc(v)		atomic_add(1, v)
 #define atomic_dec(v)		atomic_sub(1, v)
 
@@ -211,11 +241,6 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
 
-#define smp_mb__before_atomic_dec()	smp_mb()
-#define smp_mb__after_atomic_dec()	smp_mb()
-#define smp_mb__before_atomic_inc()	smp_mb()
-#define smp_mb__after_atomic_inc()	smp_mb()
-
 #ifndef CONFIG_GENERIC_ATOMIC64
 typedef struct {
 	long long counter;
@@ -299,6 +324,7 @@ static inline long long atomic64_add_return(long long i, atomic64_t *v)
 	unsigned long tmp;
 
 	smp_mb();
+	prefetchw(&v->counter);
 
 	__asm__ __volatile__("@ atomic64_add_return\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
@@ -340,6 +366,7 @@ static inline long long atomic64_sub_return(long long i, atomic64_t *v)
 	unsigned long tmp;
 
 	smp_mb();
+	prefetchw(&v->counter);
 
 	__asm__ __volatile__("@ atomic64_sub_return\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
@@ -364,6 +391,7 @@ static inline long long atomic64_cmpxchg(atomic64_t *ptr, long long old,
 	unsigned long res;
 
 	smp_mb();
+	prefetchw(&ptr->counter);
 
 	do {
 		__asm__ __volatile__("@ atomic64_cmpxchg\n"
@@ -388,6 +416,7 @@ static inline long long atomic64_xchg(atomic64_t *ptr, long long new)
 	unsigned long tmp;
 
 	smp_mb();
+	prefetchw(&ptr->counter);
 
 	__asm__ __volatile__("@ atomic64_xchg\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
@@ -409,6 +438,7 @@ static inline long long atomic64_dec_if_positive(atomic64_t *v)
 	unsigned long tmp;
 
 	smp_mb();
+	prefetchw(&v->counter);
 
 	__asm__ __volatile__("@ atomic64_dec_if_positive\n"
 "1:	ldrexd	%0, %H0, [%3]\n"
@@ -436,6 +466,7 @@ static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 	int ret = 1;
 
 	smp_mb();
+	prefetchw(&v->counter);
 
 	__asm__ __volatile__("@ atomic64_add_unless\n"
 "1:	ldrexd	%0, %H0, [%4]\n"
diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h
index 2f59f7443396..c6a3e73a6e24 100644
--- a/arch/arm/include/asm/barrier.h
+++ b/arch/arm/include/asm/barrier.h
@@ -79,5 +79,8 @@ do {									\
 
 #define set_mb(var, value)	do { var = value; smp_mb(); } while (0)
 
+#define smp_mb__before_atomic()	smp_mb()
+#define smp_mb__after_atomic()	smp_mb()
+
 #endif /* !__ASSEMBLY__ */
 #endif /* __ASM_BARRIER_H */
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index b2e298a90d76..56380995f4c3 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -25,9 +25,7 @@
 
 #include <linux/compiler.h>
 #include <linux/irqflags.h>
-
-#define smp_mb__before_clear_bit()	smp_mb()
-#define smp_mb__after_clear_bit()	smp_mb()
+#include <asm/barrier.h>
 
 /*
  * These functions are the basis of our bit ops.
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 8b8b61685a34..fd43f7f55b70 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -212,7 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
 static inline void __flush_icache_all(void)
 {
 	__flush_icache_preferred();
-	dsb();
+	dsb(ishst);
 }
 
 /*
@@ -487,4 +487,6 @@ int set_memory_rw(unsigned long addr, int numpages);
 int set_memory_x(unsigned long addr, int numpages);
 int set_memory_nx(unsigned long addr, int numpages);
 
+void flush_uprobe_xol_access(struct page *page, unsigned long uaddr,
+			     void *kaddr, unsigned long len);
 #endif
diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h
index df2fbba7efc8..abb2c3769b01 100644
--- a/arch/arm/include/asm/cmpxchg.h
+++ b/arch/arm/include/asm/cmpxchg.h
@@ -2,6 +2,7 @@
 #define __ASM_ARM_CMPXCHG_H
 
 #include <linux/irqflags.h>
+#include <linux/prefetch.h>
 #include <asm/barrier.h>
 
 #if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
@@ -35,6 +36,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 #endif
 
 	smp_mb();
+	prefetchw((const void *)ptr);
 
 	switch (size) {
 #if __LINUX_ARM_ARCH__ >= 6
@@ -138,6 +140,8 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
 {
 	unsigned long oldval, res;
 
+	prefetchw((const void *)ptr);
+
 	switch (size) {
 #ifndef CONFIG_CPU_V6	/* min ARCH >= ARMv6K */
 	case 1:
@@ -230,6 +234,8 @@ static inline unsigned long long __cmpxchg64(unsigned long long *ptr,
 	unsigned long long oldval;
 	unsigned long res;
 
+	prefetchw(ptr);
+
 	__asm__ __volatile__(
 "1:	ldrexd		%1, %H1, [%3]\n"
 "	teq		%1, %4\n"
diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h
index 6493802f880a..c3f11524f10c 100644
--- a/arch/arm/include/asm/cp15.h
+++ b/arch/arm/include/asm/cp15.h
@@ -42,24 +42,23 @@
 #ifndef __ASSEMBLY__
 
 #if __LINUX_ARM_ARCH__ >= 4
-#define vectors_high()	(cr_alignment & CR_V)
+#define vectors_high()	(get_cr() & CR_V)
 #else
 #define vectors_high()	(0)
 #endif
 
 #ifdef CONFIG_CPU_CP15
 
-extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */
 extern unsigned long cr_alignment;	/* defined in entry-armv.S */
 
-static inline unsigned int get_cr(void)
+static inline unsigned long get_cr(void)
 {
-	unsigned int val;
+	unsigned long val;
 	asm("mrc p15, 0, %0, c1, c0, 0	@ get CR" : "=r" (val) : : "cc");
 	return val;
 }
 
-static inline void set_cr(unsigned int val)
+static inline void set_cr(unsigned long val)
 {
 	asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR"
 	  : : "r" (val) : "cc");
@@ -80,10 +79,6 @@ static inline void set_auxcr(unsigned int val)
 	isb();
 }
 
-#ifndef CONFIG_SMP
-extern void adjust_cr(unsigned long mask, unsigned long set);
-#endif
-
 #define CPACC_FULL(n)		(3 << (n * 2))
 #define CPACC_SVC(n)		(1 << (n * 2))
 #define CPACC_DISABLE(n)	(0 << (n * 2))
@@ -106,13 +101,17 @@ static inline void set_copro_access(unsigned int val)
 #else /* ifdef CONFIG_CPU_CP15 */
 
 /*
- * cr_alignment and cr_no_alignment are tightly coupled to cp15 (at least in the
- * minds of the developers). Yielding 0 for machines without a cp15 (and making
- * it read-only) is fine for most cases and saves quite some #ifdeffery.
+ * cr_alignment is tightly coupled to cp15 (at least in the minds of the
+ * developers). Yielding 0 for machines without a cp15 (and making it
+ * read-only) is fine for most cases and saves quite some #ifdeffery.
  */
-#define cr_no_alignment	UL(0)
 #define cr_alignment	UL(0)
 
+static inline unsigned long get_cr(void)
+{
+	return 0;
+}
+
 #endif /* ifdef CONFIG_CPU_CP15 / else */
 
 #endif /* ifndef __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index acdde76b39bb..8c2b7321a478 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -71,6 +71,8 @@
 #define ARM_CPU_PART_CORTEX_A5		0xC050
 #define ARM_CPU_PART_CORTEX_A15		0xC0F0
 #define ARM_CPU_PART_CORTEX_A7		0xC070
+#define ARM_CPU_PART_CORTEX_A12		0xC0D0
+#define ARM_CPU_PART_CORTEX_A17		0xC0E0
 
 #define ARM_CPU_XSCALE_ARCH_MASK	0xe000
 #define ARM_CPU_XSCALE_ARCH_V1		0x2000
@@ -220,4 +222,23 @@ static inline int cpu_is_xsc3(void)
 #define	cpu_is_xscale()	1
 #endif
 
+/*
+ * Marvell's PJ4 and PJ4B cores are based on V7 version,
+ * but require a specical sequence for enabling coprocessors.
+ * For this reason, we need a way to distinguish them.
+ */
+#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
+static inline int cpu_is_pj4(void)
+{
+	unsigned int id;
+
+	id = read_cpuid_id();
+	if ((id & 0xff0fff00) == 0x560f5800)
+		return 1;
+
+	return 0;
+}
+#else
+#define cpu_is_pj4()	0
+#endif
 #endif
diff --git a/arch/arm/include/asm/dcc.h b/arch/arm/include/asm/dcc.h
new file mode 100644
index 000000000000..b74899de0774
--- /dev/null
+++ b/arch/arm/include/asm/dcc.h
@@ -0,0 +1,41 @@
+/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/barrier.h>
+
+static inline u32 __dcc_getstatus(void)
+{
+	u32 __ret;
+	asm volatile("mrc p14, 0, %0, c0, c1, 0	@ read comms ctrl reg"
+		: "=r" (__ret) : : "cc");
+
+	return __ret;
+}
+
+static inline char __dcc_getchar(void)
+{
+	char __c;
+
+	asm volatile("mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
+		: "=r" (__c));
+	isb();
+
+	return __c;
+}
+
+static inline void __dcc_putchar(char c)
+{
+	asm volatile("mcr p14, 0, %0, c0, c5, 0	@ write a char"
+		: /* no output register */
+		: "r" (c));
+	isb();
+}
diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h
index 191ada6e4d2d..662c7bd06108 100644
--- a/arch/arm/include/asm/div64.h
+++ b/arch/arm/include/asm/div64.h
@@ -156,7 +156,7 @@
 		/* Select the best insn combination to perform the   */	\
 		/* actual __m * __n / (__p << 64) operation.         */	\
 		if (!__c) {						\
-			asm (	"umull	%Q0, %R0, %1, %Q2\n\t"		\
+			asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"		\
 				"mov	%Q0, #0"			\
 				: "=&r" (__res)				\
 				: "r" (__m), "r" (__n)			\
diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h
index a8c56acc8c98..8e3fcb924db6 100644
--- a/arch/arm/include/asm/dma-iommu.h
+++ b/arch/arm/include/asm/dma-iommu.h
@@ -13,9 +13,11 @@ struct dma_iommu_mapping {
 	/* iommu specific data */
 	struct iommu_domain	*domain;
 
-	void			*bitmap;
-	size_t			bits;
-	unsigned int		order;
+	unsigned long		**bitmaps;	/* array of bitmaps */
+	unsigned int		nr_bitmaps;	/* nr of elements in array */
+	unsigned int		extensions;
+	size_t			bitmap_size;	/* size of a single bitmap */
+	size_t			bits;		/* per bitmap */
 	dma_addr_t		base;
 
 	spinlock_t		lock;
@@ -23,8 +25,7 @@ struct dma_iommu_mapping {
 };
 
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size,
-			 int order);
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size);
 
 void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping);
 
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index e701a4d9aa59..c45b61a4b4a5 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -58,21 +58,37 @@ static inline int dma_set_mask(struct device *dev, u64 mask)
 #ifndef __arch_pfn_to_dma
 static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
 {
+	if (dev)
+		pfn -= dev->dma_pfn_offset;
 	return (dma_addr_t)__pfn_to_bus(pfn);
 }
 
 static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr)
 {
-	return __bus_to_pfn(addr);
+	unsigned long pfn = __bus_to_pfn(addr);
+
+	if (dev)
+		pfn += dev->dma_pfn_offset;
+
+	return pfn;
 }
 
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
+	if (dev) {
+		unsigned long pfn = dma_to_pfn(dev, addr);
+
+		return phys_to_virt(__pfn_to_phys(pfn));
+	}
+
 	return (void *)__bus_to_virt((unsigned long)addr);
 }
 
 static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
 {
+	if (dev)
+		return pfn_to_dma(dev, virt_to_pfn(addr));
+
 	return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
 }
 
@@ -105,6 +121,13 @@ static inline unsigned long dma_max_pfn(struct device *dev)
 }
 #define dma_max_pfn(dev) dma_max_pfn(dev)
 
+static inline int set_arch_dma_coherent_ops(struct device *dev)
+{
+	set_dma_ops(dev, &arm_coherent_dma_ops);
+	return 0;
+}
+#define set_arch_dma_coherent_ops(dev)	set_arch_dma_coherent_ops(dev)
+
 static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 	unsigned int offset = paddr & ~PAGE_MASK;
diff --git a/arch/arm/include/asm/firmware.h b/arch/arm/include/asm/firmware.h
index 15631300c238..2c9f10df7568 100644
--- a/arch/arm/include/asm/firmware.h
+++ b/arch/arm/include/asm/firmware.h
@@ -22,6 +22,10 @@
  */
 struct firmware_ops {
 	/*
+	 * Inform the firmware we intend to enter CPU idle mode
+	 */
+	int (*prepare_idle)(void);
+	/*
 	 * Enters CPU idle mode
 	 */
 	int (*do_idle)(void);
diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h
index bbae919bceb4..74124b0d0d79 100644
--- a/arch/arm/include/asm/fixmap.h
+++ b/arch/arm/include/asm/fixmap.h
@@ -1,24 +1,11 @@
 #ifndef _ASM_FIXMAP_H
 #define _ASM_FIXMAP_H
 
-/*
- * Nothing too fancy for now.
- *
- * On ARM we already have well known fixed virtual addresses imposed by
- * the architecture such as the vector page which is located at 0xffff0000,
- * therefore a second level page table is already allocated covering
- * 0xfff00000 upwards.
- *
- * The cache flushing code in proc-xscale.S uses the virtual area between
- * 0xfffe0000 and 0xfffeffff.
- */
-
-#define FIXADDR_START		0xfff00000UL
-#define FIXADDR_TOP		0xfffe0000UL
+#define FIXADDR_START		0xffc00000UL
+#define FIXADDR_TOP		0xffe00000UL
 #define FIXADDR_SIZE		(FIXADDR_TOP - FIXADDR_START)
 
-#define FIX_KMAP_BEGIN		0
-#define FIX_KMAP_END		(FIXADDR_SIZE >> PAGE_SHIFT)
+#define FIX_KMAP_NR_PTES	(FIXADDR_SIZE >> PAGE_SHIFT)
 
 #define __fix_to_virt(x)	(FIXADDR_START + ((x) << PAGE_SHIFT))
 #define __virt_to_fix(x)	(((x) - FIXADDR_START) >> PAGE_SHIFT)
@@ -27,7 +14,7 @@ extern void __this_fixmap_does_not_exist(void);
 
 static inline unsigned long fix_to_virt(const unsigned int idx)
 {
-	if (idx >= FIX_KMAP_END)
+	if (idx >= FIX_KMAP_NR_PTES)
 		__this_fixmap_does_not_exist();
 	return __fix_to_virt(idx);
 }
diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h
index c9f03eccc9d8..f4882553fbb0 100644
--- a/arch/arm/include/asm/floppy.h
+++ b/arch/arm/include/asm/floppy.h
@@ -25,7 +25,7 @@
 
 #define fd_inb(port)		inb((port))
 #define fd_request_irq()	request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
-					    IRQF_DISABLED,"floppy",NULL)
+					    0,"floppy",NULL)
 #define fd_free_irq()		free_irq(IRQ_FLOPPYDISK,NULL)
 #define fd_disable_irq()	disable_irq(IRQ_FLOPPYDISK)
 #define fd_enable_irq()		enable_irq(IRQ_FLOPPYDISK)
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index f89515adac60..eb577f4f5f70 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -52,15 +52,7 @@ extern inline void *return_address(unsigned int level)
 
 #endif
 
-#define HAVE_ARCH_CALLER_ADDR
-
-#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
-#define CALLER_ADDR1 ((unsigned long)return_address(1))
-#define CALLER_ADDR2 ((unsigned long)return_address(2))
-#define CALLER_ADDR3 ((unsigned long)return_address(3))
-#define CALLER_ADDR4 ((unsigned long)return_address(4))
-#define CALLER_ADDR5 ((unsigned long)return_address(5))
-#define CALLER_ADDR6 ((unsigned long)return_address(6))
+#define ftrace_return_addr(n) return_address(n)
 
 #endif /* ifndef __ASSEMBLY__ */
 
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index e42cf597f6e6..53e69dae796f 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -3,11 +3,6 @@
 
 #ifdef __KERNEL__
 
-#if defined(CONFIG_CPU_USE_DOMAINS) && defined(CONFIG_SMP)
-/* ARM doesn't provide unprivileged exclusive memory accessors */
-#include <asm-generic/futex.h>
-#else
-
 #include <linux/futex.h>
 #include <linux/uaccess.h>
 #include <asm/errno.h>
@@ -28,6 +23,7 @@
 
 #define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	smp_mb();						\
+	prefetchw(uaddr);					\
 	__asm__ __volatile__(					\
 	"1:	ldrex	%1, [%3]\n"				\
 	"	" insn "\n"					\
@@ -51,6 +47,8 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		return -EFAULT;
 
 	smp_mb();
+	/* Prefetching cannot fault */
+	prefetchw(uaddr);
 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
 	"1:	ldrex	%1, [%4]\n"
 	"	teq	%1, %2\n"
@@ -164,6 +162,5 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 	return ret;
 }
 
-#endif /* !(CPU_USE_DOMAINS && SMP) */
 #endif /* __KERNEL__ */
 #endif /* _ASM_ARM_FUTEX_H */
diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h
index c81adc08b3fb..a3c24cd5b7c8 100644
--- a/arch/arm/include/asm/glue-cache.h
+++ b/arch/arm/include/asm/glue-cache.h
@@ -130,22 +130,22 @@
 #endif
 
 #ifndef __ASSEMBLER__
-extern inline void nop_flush_icache_all(void) { }
-extern inline void nop_flush_kern_cache_all(void) { }
-extern inline void nop_flush_kern_cache_louis(void) { }
-extern inline void nop_flush_user_cache_all(void) { }
-extern inline void nop_flush_user_cache_range(unsigned long a,
+static inline void nop_flush_icache_all(void) { }
+static inline void nop_flush_kern_cache_all(void) { }
+static inline void nop_flush_kern_cache_louis(void) { }
+static inline void nop_flush_user_cache_all(void) { }
+static inline void nop_flush_user_cache_range(unsigned long a,
 		unsigned long b, unsigned int c) { }
 
-extern inline void nop_coherent_kern_range(unsigned long a, unsigned long b) { }
-extern inline int nop_coherent_user_range(unsigned long a,
+static inline void nop_coherent_kern_range(unsigned long a, unsigned long b) { }
+static inline int nop_coherent_user_range(unsigned long a,
 		unsigned long b) { return 0; }
-extern inline void nop_flush_kern_dcache_area(void *a, size_t s) { }
+static inline void nop_flush_kern_dcache_area(void *a, size_t s) { }
 
-extern inline void nop_dma_flush_range(const void *a, const void *b) { }
+static inline void nop_dma_flush_range(const void *a, const void *b) { }
 
-extern inline void nop_dma_map_area(const void *s, size_t l, int f) { }
-extern inline void nop_dma_unmap_area(const void *s, size_t l, int f) { }
+static inline void nop_dma_map_area(const void *s, size_t l, int f) { }
+static inline void nop_dma_unmap_area(const void *s, size_t l, int f) { }
 #endif
 
 #ifndef MULTI_CACHE
diff --git a/arch/arm/include/asm/glue-df.h b/arch/arm/include/asm/glue-df.h
index 6b70f1b46a6e..04e18b656659 100644
--- a/arch/arm/include/asm/glue-df.h
+++ b/arch/arm/include/asm/glue-df.h
@@ -31,14 +31,6 @@
 #undef CPU_DABORT_HANDLER
 #undef MULTI_DABORT
 
-#if defined(CONFIG_CPU_ARM710)
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER cpu_arm7_data_abort
-# endif
-#endif
-
 #ifdef CONFIG_CPU_ABRT_EV4
 # ifdef CPU_DABORT_HANDLER
 #  define MULTI_DABORT 1
diff --git a/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
index 06f982d55697..12e1588dc4f1 100644
--- a/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
+++ b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
@@ -1,5 +1,5 @@
 /*
- * arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
+ * arch/arm/include/asm/hardware/cache-feroceon-l2.h
  *
  * Copyright (C) 2008 Marvell Semiconductor
  *
@@ -9,3 +9,5 @@
  */
 
 extern void __init feroceon_l2_init(int l2_wt_override);
+extern int __init feroceon_of_init(void);
+
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 6795ff743b3d..3a5ec1c25659 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -26,8 +26,8 @@
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
 #define L2X0_AUX_CTRL			0x104
-#define L2X0_TAG_LATENCY_CTRL		0x108
-#define L2X0_DATA_LATENCY_CTRL		0x10C
+#define L310_TAG_LATENCY_CTRL		0x108
+#define L310_DATA_LATENCY_CTRL		0x10C
 #define L2X0_EVENT_CNT_CTRL		0x200
 #define L2X0_EVENT_CNT1_CFG		0x204
 #define L2X0_EVENT_CNT0_CFG		0x208
@@ -54,53 +54,93 @@
 #define L2X0_LOCKDOWN_WAY_D_BASE	0x900
 #define L2X0_LOCKDOWN_WAY_I_BASE	0x904
 #define L2X0_LOCKDOWN_STRIDE		0x08
-#define L2X0_ADDR_FILTER_START		0xC00
-#define L2X0_ADDR_FILTER_END		0xC04
+#define L310_ADDR_FILTER_START		0xC00
+#define L310_ADDR_FILTER_END		0xC04
 #define L2X0_TEST_OPERATION		0xF00
 #define L2X0_LINE_DATA			0xF10
 #define L2X0_LINE_TAG			0xF30
 #define L2X0_DEBUG_CTRL			0xF40
-#define L2X0_PREFETCH_CTRL		0xF60
-#define L2X0_POWER_CTRL			0xF80
-#define   L2X0_DYNAMIC_CLK_GATING_EN	(1 << 1)
-#define   L2X0_STNDBY_MODE_EN		(1 << 0)
+#define L310_PREFETCH_CTRL		0xF60
+#define L310_POWER_CTRL			0xF80
+#define   L310_DYNAMIC_CLK_GATING_EN	(1 << 1)
+#define   L310_STNDBY_MODE_EN		(1 << 0)
 
 /* Registers shifts and masks */
 #define L2X0_CACHE_ID_PART_MASK		(0xf << 6)
 #define L2X0_CACHE_ID_PART_L210		(1 << 6)
+#define L2X0_CACHE_ID_PART_L220		(2 << 6)
 #define L2X0_CACHE_ID_PART_L310		(3 << 6)
 #define L2X0_CACHE_ID_RTL_MASK          0x3f
-#define L2X0_CACHE_ID_RTL_R0P0          0x0
-#define L2X0_CACHE_ID_RTL_R1P0          0x2
-#define L2X0_CACHE_ID_RTL_R2P0          0x4
-#define L2X0_CACHE_ID_RTL_R3P0          0x5
-#define L2X0_CACHE_ID_RTL_R3P1          0x6
-#define L2X0_CACHE_ID_RTL_R3P2          0x8
+#define L210_CACHE_ID_RTL_R0P2_02	0x00
+#define L210_CACHE_ID_RTL_R0P1		0x01
+#define L210_CACHE_ID_RTL_R0P2_01	0x02
+#define L210_CACHE_ID_RTL_R0P3		0x03
+#define L210_CACHE_ID_RTL_R0P4		0x0b
+#define L210_CACHE_ID_RTL_R0P5		0x0f
+#define L220_CACHE_ID_RTL_R1P7_01REL0	0x06
+#define L310_CACHE_ID_RTL_R0P0		0x00
+#define L310_CACHE_ID_RTL_R1P0		0x02
+#define L310_CACHE_ID_RTL_R2P0		0x04
+#define L310_CACHE_ID_RTL_R3P0		0x05
+#define L310_CACHE_ID_RTL_R3P1		0x06
+#define L310_CACHE_ID_RTL_R3P1_50REL0	0x07
+#define L310_CACHE_ID_RTL_R3P2		0x08
+#define L310_CACHE_ID_RTL_R3P3		0x09
 
-#define L2X0_AUX_CTRL_MASK			0xc0000fff
+/* L2C auxiliary control register - bits common to L2C-210/220/310 */
+#define L2C_AUX_CTRL_WAY_SIZE_SHIFT		17
+#define L2C_AUX_CTRL_WAY_SIZE_MASK		(7 << 17)
+#define L2C_AUX_CTRL_WAY_SIZE(n)		((n) << 17)
+#define L2C_AUX_CTRL_EVTMON_ENABLE		BIT(20)
+#define L2C_AUX_CTRL_PARITY_ENABLE		BIT(21)
+#define L2C_AUX_CTRL_SHARED_OVERRIDE		BIT(22)
+/* L2C-210/220 common bits */
 #define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT	0
-#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK	0x7
+#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK	(7 << 0)
 #define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT	3
-#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK	(0x7 << 3)
+#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK	(7 << 3)
 #define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT		6
-#define L2X0_AUX_CTRL_TAG_LATENCY_MASK		(0x7 << 6)
+#define L2X0_AUX_CTRL_TAG_LATENCY_MASK		(7 << 6)
 #define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT	9
-#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK	(0x7 << 9)
-#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT	16
-#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT		17
-#define L2X0_AUX_CTRL_WAY_SIZE_MASK		(0x7 << 17)
-#define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT	22
-#define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT		26
-#define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT		27
-#define L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT	28
-#define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT	29
-#define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT		30
+#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK	(7 << 9)
+#define L2X0_AUX_CTRL_ASSOC_SHIFT		13
+#define L2X0_AUX_CTRL_ASSOC_MASK		(15 << 13)
+/* L2C-210 specific bits */
+#define L210_AUX_CTRL_WRAP_DISABLE		BIT(12)
+#define L210_AUX_CTRL_WA_OVERRIDE		BIT(23)
+#define L210_AUX_CTRL_EXCLUSIVE_ABORT		BIT(24)
+/* L2C-220 specific bits */
+#define L220_AUX_CTRL_EXCLUSIVE_CACHE		BIT(12)
+#define L220_AUX_CTRL_FWA_SHIFT			23
+#define L220_AUX_CTRL_FWA_MASK			(3 << 23)
+#define L220_AUX_CTRL_NS_LOCKDOWN		BIT(26)
+#define L220_AUX_CTRL_NS_INT_CTRL		BIT(27)
+/* L2C-310 specific bits */
+#define L310_AUX_CTRL_FULL_LINE_ZERO		BIT(0)	/* R2P0+ */
+#define L310_AUX_CTRL_HIGHPRIO_SO_DEV		BIT(10)	/* R2P0+ */
+#define L310_AUX_CTRL_STORE_LIMITATION		BIT(11)	/* R2P0+ */
+#define L310_AUX_CTRL_EXCLUSIVE_CACHE		BIT(12)
+#define L310_AUX_CTRL_ASSOCIATIVITY_16		BIT(16)
+#define L310_AUX_CTRL_CACHE_REPLACE_RR		BIT(25)	/* R2P0+ */
+#define L310_AUX_CTRL_NS_LOCKDOWN		BIT(26)
+#define L310_AUX_CTRL_NS_INT_CTRL		BIT(27)
+#define L310_AUX_CTRL_DATA_PREFETCH		BIT(28)
+#define L310_AUX_CTRL_INSTR_PREFETCH		BIT(29)
+#define L310_AUX_CTRL_EARLY_BRESP		BIT(30)	/* R2P0+ */
 
-#define L2X0_LATENCY_CTRL_SETUP_SHIFT	0
-#define L2X0_LATENCY_CTRL_RD_SHIFT	4
-#define L2X0_LATENCY_CTRL_WR_SHIFT	8
+#define L310_LATENCY_CTRL_SETUP(n)		((n) << 0)
+#define L310_LATENCY_CTRL_RD(n)			((n) << 4)
+#define L310_LATENCY_CTRL_WR(n)			((n) << 8)
 
-#define L2X0_ADDR_FILTER_EN		1
+#define L310_ADDR_FILTER_EN		1
+
+#define L310_PREFETCH_CTRL_OFFSET_MASK		0x1f
+#define L310_PREFETCH_CTRL_DBL_LINEFILL_INCR	BIT(23)
+#define L310_PREFETCH_CTRL_PREFETCH_DROP	BIT(24)
+#define L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP	BIT(27)
+#define L310_PREFETCH_CTRL_DATA_PREFETCH	BIT(28)
+#define L310_PREFETCH_CTRL_INSTR_PREFETCH	BIT(29)
+#define L310_PREFETCH_CTRL_DBL_LINEFILL		BIT(30)
 
 #define L2X0_CTRL_EN			1
 
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index 91b99abe7a95..535579511ed0 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -18,6 +18,7 @@
 	} while (0)
 
 extern pte_t *pkmap_page_table;
+extern pte_t *fixmap_page_table;
 
 extern void *kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index eef55ea9ef00..8e427c7b4425 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -51,6 +51,7 @@ static inline void decode_ctrl_reg(u32 reg,
 #define ARM_DEBUG_ARCH_V7_ECP14	3
 #define ARM_DEBUG_ARCH_V7_MM	4
 #define ARM_DEBUG_ARCH_V7_1	5
+#define ARM_DEBUG_ARCH_V8	6
 
 /* Breakpoint */
 #define ARM_BREAKPOINT_EXECUTE	0
diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h
index 6ff56eca3f1f..6e183fd269fb 100644
--- a/arch/arm/include/asm/hwcap.h
+++ b/arch/arm/include/asm/hwcap.h
@@ -9,6 +9,7 @@
  * instruction set this cpu supports.
  */
 #define ELF_HWCAP	(elf_hwcap)
-extern unsigned int elf_hwcap;
+#define ELF_HWCAP2	(elf_hwcap2)
+extern unsigned int elf_hwcap, elf_hwcap2;
 #endif
 #endif
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 8aa4cca74501..3d23418cbddd 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -179,6 +179,12 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
 /* PCI fixed i/o mapping */
 #define PCI_IO_VIRT_BASE	0xfee00000
 
+#if defined(CONFIG_PCI)
+void pci_ioremap_set_mem_type(int mem_type);
+#else
+static inline void pci_ioremap_set_mem_type(int mem_type) {}
+#endif
+
 extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);
 
 /*
diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h
index 863c892b4aaa..70f9b9bfb1f9 100644
--- a/arch/arm/include/asm/jump_label.h
+++ b/arch/arm/include/asm/jump_label.h
@@ -4,7 +4,6 @@
 #ifdef __KERNEL__
 
 #include <linux/types.h>
-#include <asm/system.h>
 
 #define JUMP_LABEL_NOP_SIZE 4
 
diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
index f82ec22eeb11..49fa0dfaad33 100644
--- a/arch/arm/include/asm/kprobes.h
+++ b/arch/arm/include/asm/kprobes.h
@@ -18,7 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/ptrace.h>
-#include <linux/percpu.h>
+#include <linux/notifier.h>
 
 #define __ARCH_WANT_KPROBES_INSN_SLOT
 #define MAX_INSN_SIZE			2
@@ -28,21 +28,10 @@
 #define kretprobe_blacklist_size	0
 
 typedef u32 kprobe_opcode_t;
-
 struct kprobe;
-typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
-typedef unsigned long (kprobe_check_cc)(unsigned long);
-typedef void (kprobe_insn_singlestep_t)(struct kprobe *, struct pt_regs *);
-typedef void (kprobe_insn_fn_t)(void);
+#include <asm/probes.h>
 
-/* Architecture specific copy of original instruction. */
-struct arch_specific_insn {
-	kprobe_opcode_t			*insn;
-	kprobe_insn_handler_t		*insn_handler;
-	kprobe_check_cc			*insn_check_cc;
-	kprobe_insn_singlestep_t	*insn_singlestep;
-	kprobe_insn_fn_t		*insn_fn;
-};
+#define	arch_specific_insn	arch_probes_insn
 
 struct prev_kprobe {
 	struct kprobe *kp;
diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h
index 1d3153c7eb41..816db0bf2dd8 100644
--- a/arch/arm/include/asm/kvm_arm.h
+++ b/arch/arm/include/asm/kvm_arm.h
@@ -55,6 +55,7 @@
  * The bits we set in HCR:
  * TAC:		Trap ACTLR
  * TSC:		Trap SMC
+ * TVM:		Trap VM ops (until MMU and caches are on)
  * TSW:		Trap cache operations by set/way
  * TWI:		Trap WFI
  * TWE:		Trap WFE
@@ -68,8 +69,7 @@
  */
 #define HCR_GUEST_MASK (HCR_TSC | HCR_TSW | HCR_TWI | HCR_VM | HCR_BSU_IS | \
 			HCR_FB | HCR_TAC | HCR_AMO | HCR_IMO | HCR_FMO | \
-			HCR_TWE | HCR_SWIO | HCR_TIDCP)
-#define HCR_VIRT_EXCP_MASK (HCR_VA | HCR_VI | HCR_VF)
+			HCR_TVM | HCR_TWE | HCR_SWIO | HCR_TIDCP)
 
 /* System Control Register (SCTLR) bits */
 #define SCTLR_TE	(1 << 30)
diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h
index 661da11f76f4..53b3c4a50d5c 100644
--- a/arch/arm/include/asm/kvm_asm.h
+++ b/arch/arm/include/asm/kvm_asm.h
@@ -48,7 +48,9 @@
 #define c13_TID_URO	26	/* Thread ID, User R/O */
 #define c13_TID_PRIV	27	/* Thread ID, Privileged */
 #define c14_CNTKCTL	28	/* Timer Control Register (PL1) */
-#define NR_CP15_REGS	29	/* Number of regs (incl. invalid) */
+#define c10_AMAIR0	29	/* Auxilary Memory Attribute Indirection Reg0 */
+#define c10_AMAIR1	30	/* Auxilary Memory Attribute Indirection Reg1 */
+#define NR_CP15_REGS	31	/* Number of regs (incl. invalid) */
 
 #define ARM_EXCEPTION_RESET	  0
 #define ARM_EXCEPTION_UNDEFINED   1
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index 098f7dd6d564..193ceaf01bfd 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -36,7 +36,7 @@
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
 #define KVM_HAVE_ONE_REG
 
-#define KVM_VCPU_MAX_FEATURES 1
+#define KVM_VCPU_MAX_FEATURES 2
 
 #include <kvm/arm_vgic.h>
 
@@ -101,6 +101,12 @@ struct kvm_vcpu_arch {
 	/* The CPU type we expose to the VM */
 	u32 midr;
 
+	/* HYP trapping configuration */
+	u32 hcr;
+
+	/* Interrupt related fields */
+	u32 irq_lines;		/* IRQ and FIQ levels */
+
 	/* Exception Information */
 	struct kvm_vcpu_fault_info fault;
 
@@ -128,9 +134,6 @@ struct kvm_vcpu_arch {
 	/* IO related fields */
 	struct kvm_decode mmio_decode;
 
-	/* Interrupt related fields */
-	u32 irq_lines;		/* IRQ and FIQ levels */
-
 	/* Cache some mmu pages needed inside spinlock regions */
 	struct kvm_mmu_memory_cache mmu_page_cache;
 
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
index 2d122adcdb22..5c7aa3c1519f 100644
--- a/arch/arm/include/asm/kvm_mmu.h
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -114,11 +114,34 @@ static inline void kvm_set_s2pmd_writable(pmd_t *pmd)
 	pmd_val(*pmd) |= L_PMD_S2_RDWR;
 }
 
+/* Open coded p*d_addr_end that can deal with 64bit addresses */
+#define kvm_pgd_addr_end(addr, end)					\
+({	u64 __boundary = ((addr) + PGDIR_SIZE) & PGDIR_MASK;		\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+
+#define kvm_pud_addr_end(addr,end)		(end)
+
+#define kvm_pmd_addr_end(addr, end)					\
+({	u64 __boundary = ((addr) + PMD_SIZE) & PMD_MASK;		\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+
 struct kvm;
 
-static inline void coherent_icache_guest_page(struct kvm *kvm, hva_t hva,
-					      unsigned long size)
+#define kvm_flush_dcache_to_poc(a,l)	__cpuc_flush_dcache_area((a), (l))
+
+static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu)
 {
+	return (vcpu->arch.cp15[c1_SCTLR] & 0b101) == 0b101;
+}
+
+static inline void coherent_cache_guest_page(struct kvm_vcpu *vcpu, hva_t hva,
+					     unsigned long size)
+{
+	if (!vcpu_has_cache_enabled(vcpu))
+		kvm_flush_dcache_to_poc((void *)hva, size);
+	
 	/*
 	 * If we are going to insert an instruction page and the icache is
 	 * either VIPT or PIPT, there is a potential problem where the host
@@ -139,9 +162,10 @@ static inline void coherent_icache_guest_page(struct kvm *kvm, hva_t hva,
 	}
 }
 
-#define kvm_flush_dcache_to_poc(a,l)	__cpuc_flush_dcache_area((a), (l))
 #define kvm_virt_to_phys(x)		virt_to_idmap((unsigned long)(x))
 
+void stage2_flush_vm(struct kvm *kvm);
+
 #endif	/* !__ASSEMBLY__ */
 
 #endif /* __ARM_KVM_MMU_H__ */
diff --git a/arch/arm/include/asm/kvm_psci.h b/arch/arm/include/asm/kvm_psci.h
index 9a83d98bf170..6bda945d31fa 100644
--- a/arch/arm/include/asm/kvm_psci.h
+++ b/arch/arm/include/asm/kvm_psci.h
@@ -18,6 +18,10 @@
 #ifndef __ARM_KVM_PSCI_H__
 #define __ARM_KVM_PSCI_H__
 
-bool kvm_psci_call(struct kvm_vcpu *vcpu);
+#define KVM_ARM_PSCI_0_1	1
+#define KVM_ARM_PSCI_0_2	2
+
+int kvm_psci_version(struct kvm_vcpu *vcpu);
+int kvm_psci_call(struct kvm_vcpu *vcpu);
 
 #endif /* __ARM_KVM_PSCI_H__ */
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 17a3fa2979e8..060a75e99263 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -14,7 +14,6 @@
 #include <linux/reboot.h>
 
 struct tag;
-struct meminfo;
 struct pt_regs;
 struct smp_operations;
 #ifdef CONFIG_SMP
@@ -45,10 +44,12 @@ struct machine_desc {
 	unsigned char		reserve_lp1 :1;	/* never has lp1	*/
 	unsigned char		reserve_lp2 :1;	/* never has lp2	*/
 	enum reboot_mode	reboot_mode;	/* default restart mode	*/
+	unsigned		l2c_aux_val;	/* L2 cache aux value	*/
+	unsigned		l2c_aux_mask;	/* L2 cache aux mask	*/
+	void			(*l2c_write_sec)(unsigned long, unsigned);
 	struct smp_operations	*smp;		/* SMP operations	*/
 	bool			(*smp_init)(void);
-	void			(*fixup)(struct tag *, char **,
-					 struct meminfo *);
+	void			(*fixup)(struct tag *, char **);
 	void			(*init_meminfo)(void);
 	void			(*reserve)(void);/* reserve mem blocks	*/
 	void			(*map_io)(void);/* IO mapping function	*/
diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h
index 608516ebabfe..d9702eb0b02b 100644
--- a/arch/arm/include/asm/mcpm.h
+++ b/arch/arm/include/asm/mcpm.h
@@ -54,6 +54,13 @@ void mcpm_set_early_poke(unsigned cpu, unsigned cluster,
  */
 
 /**
+ * mcpm_is_available - returns whether MCPM is initialized and available
+ *
+ * This returns true or false accordingly.
+ */
+bool mcpm_is_available(void);
+
+/**
  * mcpm_cpu_power_up - make given CPU in given cluster runable
  *
  * @cpu: CPU number within given cluster
@@ -91,14 +98,14 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster);
  * previously in which case the caller should take appropriate action.
  *
  * On success, the CPU is not guaranteed to be truly halted until
- * mcpm_cpu_power_down_finish() subsequently returns non-zero for the
+ * mcpm_wait_for_cpu_powerdown() subsequently returns non-zero for the
  * specified cpu.  Until then, other CPUs should make sure they do not
  * trash memory the target CPU might be executing/accessing.
  */
 void mcpm_cpu_power_down(void);
 
 /**
- * mcpm_cpu_power_down_finish - wait for a specified CPU to halt, and
+ * mcpm_wait_for_cpu_powerdown - wait for a specified CPU to halt, and
  *	make sure it is powered off
  *
  * @cpu: CPU number within given cluster
@@ -120,7 +127,7 @@ void mcpm_cpu_power_down(void);
  *	- zero if the CPU is in a safely parked state
  *	- nonzero otherwise (e.g., timeout)
  */
-int mcpm_cpu_power_down_finish(unsigned int cpu, unsigned int cluster);
+int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster);
 
 /**
  * mcpm_cpu_suspend - bring the calling CPU in a suspended state
@@ -164,7 +171,7 @@ int mcpm_cpu_powered_up(void);
 struct mcpm_platform_ops {
 	int (*power_up)(unsigned int cpu, unsigned int cluster);
 	void (*power_down)(void);
-	int (*power_down_finish)(unsigned int cpu, unsigned int cluster);
+	int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster);
 	void (*suspend)(u64);
 	void (*powered_up)(void);
 };
diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h
index c2f5102ae659..bf47a6c110a2 100644
--- a/arch/arm/include/asm/memblock.h
+++ b/arch/arm/include/asm/memblock.h
@@ -1,10 +1,9 @@
 #ifndef _ASM_ARM_MEMBLOCK_H
 #define _ASM_ARM_MEMBLOCK_H
 
-struct meminfo;
 struct machine_desc;
 
-void arm_memblock_init(struct meminfo *, const struct machine_desc *);
+void arm_memblock_init(const struct machine_desc *);
 phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align);
 
 #endif
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 4afb376d9c7c..2b751464d6ff 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -83,8 +83,6 @@
  */
 #define IOREMAP_MAX_ORDER	24
 
-#define CONSISTENT_END		(0xffe00000UL)
-
 #else /* CONFIG_MMU */
 
 /*
@@ -166,9 +164,17 @@
  * Physical vs virtual RAM address space conversion.  These are
  * private definitions which should NOT be used outside memory.h
  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ *
+ * PFNs are used to describe any physical page; this means
+ * PFN 0 == physical address 0.
  */
-#ifndef __virt_to_phys
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+#if defined(__virt_to_phys)
+#define PHYS_OFFSET	PLAT_PHYS_OFFSET
+#define PHYS_PFN_OFFSET	((unsigned long)(PHYS_OFFSET >> PAGE_SHIFT))
+
+#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
+
+#elif defined(CONFIG_ARM_PATCH_PHYS_VIRT)
 
 /*
  * Constants used to force the right instruction encodings and shifts
@@ -177,12 +183,17 @@
 #define __PV_BITS_31_24	0x81000000
 #define __PV_BITS_7_0	0x81
 
-extern u64 __pv_phys_offset;
+extern unsigned long __pv_phys_pfn_offset;
 extern u64 __pv_offset;
 extern void fixup_pv_table(const void *, unsigned long);
 extern const void *__pv_table_begin, *__pv_table_end;
 
-#define PHYS_OFFSET __pv_phys_offset
+#define PHYS_OFFSET	((phys_addr_t)__pv_phys_pfn_offset << PAGE_SHIFT)
+#define PHYS_PFN_OFFSET	(__pv_phys_pfn_offset)
+
+#define virt_to_pfn(kaddr) \
+	((((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT) + \
+	 PHYS_PFN_OFFSET)
 
 #define __pv_stub(from,to,instr,type)			\
 	__asm__("@ __pv_stub\n"				\
@@ -243,6 +254,7 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
 #else
 
 #define PHYS_OFFSET	PLAT_PHYS_OFFSET
+#define PHYS_PFN_OFFSET	((unsigned long)(PHYS_OFFSET >> PAGE_SHIFT))
 
 static inline phys_addr_t __virt_to_phys(unsigned long x)
 {
@@ -254,18 +266,11 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
 	return x - PHYS_OFFSET + PAGE_OFFSET;
 }
 
-#endif
-#endif
+#define virt_to_pfn(kaddr) \
+	((((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT) + \
+	 PHYS_PFN_OFFSET)
 
-/*
- * PFNs are used to describe any physical page; this means
- * PFN 0 == physical address 0.
- *
- * This is the PFN of the first RAM page in the kernel
- * direct-mapped view.  We assume this is the first page
- * of RAM in the mem_map as well.
- */
-#define PHYS_PFN_OFFSET	((unsigned long)(PHYS_OFFSET >> PAGE_SHIFT))
+#endif
 
 /*
  * These are *only* valid on the kernel direct mapped RAM memory.
@@ -343,9 +348,9 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
  */
 #define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
 
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_to_page(kaddr)	pfn_to_page(virt_to_pfn(kaddr))
 #define virt_addr_valid(kaddr)	(((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) \
-					&& pfn_valid(__pa(kaddr) >> PAGE_SHIFT) )
+					&& pfn_valid(virt_to_pfn(kaddr)))
 
 #endif
 
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
index f94784f0e3a6..891a56b35bcf 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -28,53 +28,84 @@ struct outer_cache_fns {
 	void (*clean_range)(unsigned long, unsigned long);
 	void (*flush_range)(unsigned long, unsigned long);
 	void (*flush_all)(void);
-	void (*inv_all)(void);
 	void (*disable)(void);
 #ifdef CONFIG_OUTER_CACHE_SYNC
 	void (*sync)(void);
 #endif
-	void (*set_debug)(unsigned long);
 	void (*resume)(void);
+
+	/* This is an ARM L2C thing */
+	void (*write_sec)(unsigned long, unsigned);
 };
 
 extern struct outer_cache_fns outer_cache;
 
 #ifdef CONFIG_OUTER_CACHE
-
+/**
+ * outer_inv_range - invalidate range of outer cache lines
+ * @start: starting physical address, inclusive
+ * @end: end physical address, exclusive
+ */
 static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)
 {
 	if (outer_cache.inv_range)
 		outer_cache.inv_range(start, end);
 }
+
+/**
+ * outer_clean_range - clean dirty outer cache lines
+ * @start: starting physical address, inclusive
+ * @end: end physical address, exclusive
+ */
 static inline void outer_clean_range(phys_addr_t start, phys_addr_t end)
 {
 	if (outer_cache.clean_range)
 		outer_cache.clean_range(start, end);
 }
+
+/**
+ * outer_flush_range - clean and invalidate outer cache lines
+ * @start: starting physical address, inclusive
+ * @end: end physical address, exclusive
+ */
 static inline void outer_flush_range(phys_addr_t start, phys_addr_t end)
 {
 	if (outer_cache.flush_range)
 		outer_cache.flush_range(start, end);
 }
 
+/**
+ * outer_flush_all - clean and invalidate all cache lines in the outer cache
+ *
+ * Note: depending on implementation, this may not be atomic - it must
+ * only be called with interrupts disabled and no other active outer
+ * cache masters.
+ *
+ * It is intended that this function is only used by implementations
+ * needing to override the outer_cache.disable() method due to security.
+ * (Some implementations perform this as a clean followed by an invalidate.)
+ */
 static inline void outer_flush_all(void)
 {
 	if (outer_cache.flush_all)
 		outer_cache.flush_all();
 }
 
-static inline void outer_inv_all(void)
-{
-	if (outer_cache.inv_all)
-		outer_cache.inv_all();
-}
-
-static inline void outer_disable(void)
-{
-	if (outer_cache.disable)
-		outer_cache.disable();
-}
+/**
+ * outer_disable - clean, invalidate and disable the outer cache
+ *
+ * Disable the outer cache, ensuring that any data contained in the outer
+ * cache is pushed out to lower levels of system memory.  The note and
+ * conditions above concerning outer_flush_all() applies here.
+ */
+extern void outer_disable(void);
 
+/**
+ * outer_resume - restore the cache configuration and re-enable outer cache
+ *
+ * Restore any configuration that the cache had when previously enabled,
+ * and re-enable the outer cache.
+ */
 static inline void outer_resume(void)
 {
 	if (outer_cache.resume)
@@ -90,13 +121,18 @@ static inline void outer_clean_range(phys_addr_t start, phys_addr_t end)
 static inline void outer_flush_range(phys_addr_t start, phys_addr_t end)
 { }
 static inline void outer_flush_all(void) { }
-static inline void outer_inv_all(void) { }
 static inline void outer_disable(void) { }
 static inline void outer_resume(void) { }
 
 #endif
 
 #ifdef CONFIG_OUTER_CACHE_SYNC
+/**
+ * outer_sync - perform a sync point for outer cache
+ *
+ * Ensure that all outer cache operations are complete and any store
+ * buffers are drained.
+ */
 static inline void outer_sync(void)
 {
 	if (outer_cache.sync)
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 680a83e94467..7e95d8535e24 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -31,11 +31,6 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 }
 #endif /* CONFIG_PCI_DOMAINS */
 
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
 /*
  * The PCI address space does equal the physical memory address space.
  * The networking and block device layers use this boolean for bounce
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index dfff709fda3c..219ac88a9542 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -140,6 +140,7 @@
 #define L_PTE_MT_DEV_NONSHARED	(_AT(pteval_t, 0x0c) << 2)	/* 1100 */
 #define L_PTE_MT_DEV_WC		(_AT(pteval_t, 0x09) << 2)	/* 1001 */
 #define L_PTE_MT_DEV_CACHED	(_AT(pteval_t, 0x0b) << 2)	/* 1011 */
+#define L_PTE_MT_VECTORS	(_AT(pteval_t, 0x0f) << 2)	/* 1111 */
 #define L_PTE_MT_MASK		(_AT(pteval_t, 0x0f) << 2)
 
 #ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 7d59b524f2af..5478e5d6ad89 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -216,13 +216,16 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 
 #define pte_none(pte)		(!pte_val(pte))
 #define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
+#define pte_valid(pte)		(pte_val(pte) & L_PTE_VALID)
+#define pte_accessible(mm, pte)	(mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid(pte))
 #define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
 #define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
 #define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
 #define pte_exec(pte)		(!(pte_val(pte) & L_PTE_XN))
 #define pte_special(pte)	(0)
 
-#define pte_present_user(pte)  (pte_present(pte) && (pte_val(pte) & L_PTE_USER))
+#define pte_valid_user(pte)	\
+	(pte_valid(pte) && (pte_val(pte) & L_PTE_USER) && pte_young(pte))
 
 #if __LINUX_ARM_ARCH__ < 6
 static inline void __sync_icache_dcache(pte_t pteval)
@@ -237,7 +240,7 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 {
 	unsigned long ext = 0;
 
-	if (addr < TASK_SIZE && pte_present_user(pteval)) {
+	if (addr < TASK_SIZE && pte_valid_user(pteval)) {
 		__sync_icache_dcache(pteval);
 		ext |= PTE_EXT_NG;
 	}
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index f24edad26c70..ae1919be8f98 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -71,6 +71,8 @@ struct arm_pmu {
 	void		(*disable)(struct perf_event *event);
 	int		(*get_event_idx)(struct pmu_hw_events *hw_events,
 					 struct perf_event *event);
+	void		(*clear_event_idx)(struct pmu_hw_events *hw_events,
+					 struct perf_event *event);
 	int		(*set_event_filter)(struct hw_perf_event *evt,
 					    struct perf_event_attr *attr);
 	u32		(*read_counter)(struct perf_event *event);
diff --git a/arch/arm/include/asm/probes.h b/arch/arm/include/asm/probes.h
new file mode 100644
index 000000000000..806cfe622a9e
--- /dev/null
+++ b/arch/arm/include/asm/probes.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/include/asm/probes.h
+ *
+ * Original contents copied from arch/arm/include/asm/kprobes.h
+ * which contains the following notice...
+ *
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _ASM_PROBES_H
+#define _ASM_PROBES_H
+
+typedef u32 probes_opcode_t;
+
+struct arch_probes_insn;
+typedef void (probes_insn_handler_t)(probes_opcode_t,
+				     struct arch_probes_insn *,
+				     struct pt_regs *);
+typedef unsigned long (probes_check_cc)(unsigned long);
+typedef void (probes_insn_singlestep_t)(probes_opcode_t,
+					struct arch_probes_insn *,
+					struct pt_regs *);
+typedef void (probes_insn_fn_t)(void);
+
+/* Architecture specific copy of original instruction. */
+struct arch_probes_insn {
+	probes_opcode_t			*insn;
+	probes_insn_handler_t		*insn_handler;
+	probes_check_cc			*insn_check_cc;
+	probes_insn_singlestep_t	*insn_singlestep;
+	probes_insn_fn_t		*insn_fn;
+};
+
+#endif
diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h
index b681575ad3de..cd94ef2ef283 100644
--- a/arch/arm/include/asm/prom.h
+++ b/arch/arm/include/asm/prom.h
@@ -14,7 +14,6 @@
 #ifdef CONFIG_OF
 
 extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
-extern void arm_dt_memblock_reserve(void);
 extern void __init arm_dt_init_cpu_maps(void);
 
 #else /* CONFIG_OF */
@@ -24,7 +23,6 @@ static inline const struct machine_desc *setup_machine_fdt(unsigned int dt_phys)
 	return NULL;
 }
 
-static inline void arm_dt_memblock_reserve(void) { }
 static inline void arm_dt_init_cpu_maps(void) { }
 
 #endif /* CONFIG_OF */
diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h
index c4ae171850f8..c25ef3ec6d1f 100644
--- a/arch/arm/include/asm/psci.h
+++ b/arch/arm/include/asm/psci.h
@@ -29,16 +29,19 @@ struct psci_operations {
 	int (*cpu_off)(struct psci_power_state state);
 	int (*cpu_on)(unsigned long cpuid, unsigned long entry_point);
 	int (*migrate)(unsigned long cpuid);
+	int (*affinity_info)(unsigned long target_affinity,
+			unsigned long lowest_affinity_level);
+	int (*migrate_info_type)(void);
 };
 
 extern struct psci_operations psci_ops;
 extern struct smp_operations psci_smp_ops;
 
 #ifdef CONFIG_ARM_PSCI
-void psci_init(void);
+int psci_init(void);
 bool psci_smp_available(void);
 #else
-static inline void psci_init(void) { }
+static inline int psci_init(void) { return 0; }
 static inline bool psci_smp_available(void) { return false; }
 #endif
 
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 04c99f36ff7f..c877654fe3bf 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -27,9 +27,13 @@ struct pt_regs {
 #define thumb_mode(regs) (0)
 #endif
 
+#ifndef CONFIG_CPU_V7M
 #define isa_mode(regs) \
-	((((regs)->ARM_cpsr & PSR_J_BIT) >> 23) | \
-	 (((regs)->ARM_cpsr & PSR_T_BIT) >> 5))
+	((((regs)->ARM_cpsr & PSR_J_BIT) >> (__ffs(PSR_J_BIT) - 1)) | \
+	 (((regs)->ARM_cpsr & PSR_T_BIT) >> (__ffs(PSR_T_BIT))))
+#else
+#define isa_mode(regs) 1 /* Thumb */
+#endif
 
 #define processor_mode(regs) \
 	((regs)->ARM_cpsr & MODE_MASK)
@@ -80,6 +84,12 @@ static inline long regs_return_value(struct pt_regs *regs)
 
 #define instruction_pointer(regs)	(regs)->ARM_pc
 
+static inline void instruction_pointer_set(struct pt_regs *regs,
+					   unsigned long val)
+{
+	instruction_pointer(regs) = val;
+}
+
 #ifdef CONFIG_SMP
 extern unsigned long profile_pc(struct pt_regs *regs);
 #else
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 8d6a089dfb76..e0adb9f1bf94 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -21,34 +21,6 @@
 #define __tagtable(tag, fn) \
 static const struct tagtable __tagtable_##fn __tag = { tag, fn }
 
-/*
- * Memory map description
- */
-#define NR_BANKS	CONFIG_ARM_NR_BANKS
-
-struct membank {
-	phys_addr_t start;
-	phys_addr_t size;
-	unsigned int highmem;
-};
-
-struct meminfo {
-	int nr_banks;
-	struct membank bank[NR_BANKS];
-};
-
-extern struct meminfo meminfo;
-
-#define for_each_bank(iter,mi)				\
-	for (iter = 0; iter < (mi)->nr_banks; iter++)
-
-#define bank_pfn_start(bank)	__phys_to_pfn((bank)->start)
-#define bank_pfn_end(bank)	__phys_to_pfn((bank)->start + (bank)->size)
-#define bank_pfn_size(bank)	((bank)->size >> PAGE_SHIFT)
-#define bank_phys_start(bank)	(bank)->start
-#define bank_phys_end(bank)	((bank)->start + (bank)->size)
-#define bank_phys_size(bank)	(bank)->size
-
 extern int arm_add_memory(u64 start, u64 size);
 extern void early_print(const char *str, ...);
 extern void dump_machine_table(void);
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 22a3b9b5d4a1..2ec765c39ab4 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -74,6 +74,7 @@ struct secondary_data {
 };
 extern struct secondary_data secondary_data;
 extern volatile int pen_release;
+extern void secondary_startup(void);
 
 extern int __cpu_disable(void);
 
@@ -114,6 +115,15 @@ struct smp_operations {
 #endif
 };
 
+struct of_cpu_method {
+	const char *method;
+	struct smp_operations *ops;
+};
+
+#define CPU_METHOD_OF_DECLARE(name, _method, _ops)			\
+	static const struct of_cpu_method __cpu_method_of_table_##name	\
+		__used __section(__cpu_method_of_table)			\
+		= { .method = _method, .ops = _ops }
 /*
  * set platform specific SMP operations
  */
diff --git a/arch/arm/include/asm/sync_bitops.h b/arch/arm/include/asm/sync_bitops.h
index 63479eecbf76..9732b8e11e63 100644
--- a/arch/arm/include/asm/sync_bitops.h
+++ b/arch/arm/include/asm/sync_bitops.h
@@ -2,7 +2,6 @@
 #define __ASM_SYNC_BITOPS_H__
 
 #include <asm/bitops.h>
-#include <asm/system.h>
 
 /* sync_bitops functions are equivalent to the SMP implementation of the
  * original functions, independently from CONFIG_SMP being defined.
diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h
index 73ddd7239b33..4651f6999b7d 100644
--- a/arch/arm/include/asm/syscall.h
+++ b/arch/arm/include/asm/syscall.h
@@ -7,7 +7,7 @@
 #ifndef _ASM_ARM_SYSCALL_H
 #define _ASM_ARM_SYSCALL_H
 
-#include <linux/audit.h> /* for AUDIT_ARCH_* */
+#include <uapi/linux/audit.h> /* for AUDIT_ARCH_* */
 #include <linux/elf.h> /* for ELF_EM */
 #include <linux/err.h>
 #include <linux/sched.h>
@@ -103,8 +103,7 @@ static inline void syscall_set_arguments(struct task_struct *task,
 	memcpy(&regs->ARM_r0 + i, args, n * sizeof(args[0]));
 }
 
-static inline int syscall_get_arch(struct task_struct *task,
-				   struct pt_regs *regs)
+static inline int syscall_get_arch(void)
 {
 	/* ARM tasks don't change audit architectures on the fly. */
 	return AUDIT_ARCH_ARM;
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
deleted file mode 100644
index 368165e33c1c..000000000000
--- a/arch/arm/include/asm/system.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* FILE TO BE DELETED. DO NOT ADD STUFF HERE! */
-#include <asm/barrier.h>
-#include <asm/compiler.h>
-#include <asm/cmpxchg.h>
-#include <asm/switch_to.h>
-#include <asm/system_info.h>
-#include <asm/system_misc.h>
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 71a06b293489..f989d7c22dc5 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -153,6 +153,7 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 #define TIF_SIGPENDING		0
 #define TIF_NEED_RESCHED	1
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
+#define TIF_UPROBE		7
 #define TIF_SYSCALL_TRACE	8
 #define TIF_SYSCALL_AUDIT	9
 #define TIF_SYSCALL_TRACEPOINT	10
@@ -165,6 +166,7 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_UPROBE		(1 << TIF_UPROBE)
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
@@ -178,7 +180,8 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 /*
  * Change these and you break ASM code in entry-common.S
  */
-#define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | _TIF_NOTIFY_RESUME)
+#define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
+				 _TIF_NOTIFY_RESUME | _TIF_UPROBE)
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_THREAD_INFO_H */
diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
index 83f2aa83899c..f6fcc67ef06e 100644
--- a/arch/arm/include/asm/timex.h
+++ b/arch/arm/include/asm/timex.h
@@ -12,12 +12,6 @@
 #ifndef _ASMARM_TIMEX_H
 #define _ASMARM_TIMEX_H
 
-#ifdef CONFIG_ARCH_MULTIPLATFORM
-#define CLOCK_TICK_RATE 1000000
-#else
-#include <mach/timex.h>
-#endif
-
 typedef unsigned long cycles_t;
 #define get_cycles()	({ cycles_t c; read_current_timer(&c) ? 0 : c; })
 
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 0baf7f0d9394..f1a0dace3efe 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -98,15 +98,25 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb)
 	}
 }
 
-static inline void tlb_flush_mmu(struct mmu_gather *tlb)
+static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
 {
 	tlb_flush(tlb);
+}
+
+static inline void tlb_flush_mmu_free(struct mmu_gather *tlb)
+{
 	free_pages_and_swap_cache(tlb->pages, tlb->nr);
 	tlb->nr = 0;
 	if (tlb->pages == tlb->local)
 		__tlb_alloc_page(tlb);
 }
 
+static inline void tlb_flush_mmu(struct mmu_gather *tlb)
+{
+	tlb_flush_mmu_tlbonly(tlb);
+	tlb_flush_mmu_free(tlb);
+}
+
 static inline void
 tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end)
 {
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
index 58b8b84adcd2..2fe85fff5cca 100644
--- a/arch/arm/include/asm/topology.h
+++ b/arch/arm/include/asm/topology.h
@@ -20,9 +20,6 @@ extern struct cputopo_arm cpu_topology[NR_CPUS];
 #define topology_core_cpumask(cpu)	(&cpu_topology[cpu].core_sibling)
 #define topology_thread_cpumask(cpu)	(&cpu_topology[cpu].thread_sibling)
 
-#define mc_capable()	(cpu_topology[0].socket_id != -1)
-#define smt_capable()	(cpu_topology[0].thread_id != -1)
-
 void init_cpu_topology(void);
 void store_cpu_topology(unsigned int cpuid);
 const struct cpumask *cpu_coregroup_mask(int cpu);
diff --git a/arch/arm/include/asm/trusted_foundations.h b/arch/arm/include/asm/trusted_foundations.h
index 3bd36e2c5f2e..624e1d436c6c 100644
--- a/arch/arm/include/asm/trusted_foundations.h
+++ b/arch/arm/include/asm/trusted_foundations.h
@@ -30,6 +30,8 @@
 #include <linux/printk.h>
 #include <linux/bug.h>
 #include <linux/of.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
 
 struct trusted_foundations_platform_data {
 	unsigned int version_major;
@@ -47,10 +49,15 @@ static inline void register_trusted_foundations(
 				   struct trusted_foundations_platform_data *pd)
 {
 	/*
-	 * If we try to register TF, this means the system needs it to continue.
-	 * Its absence if thus a fatal error.
+	 * If the system requires TF and we cannot provide it, continue booting
+	 * but disable features that cannot be provided.
 	 */
-	panic("No support for Trusted Foundations, stopping...\n");
+	pr_err("No support for Trusted Foundations, continuing in degraded mode.\n");
+	pr_err("Secondary processors as well as CPU PM will be disabled.\n");
+#if IS_ENABLED(CONFIG_SMP)
+	setup_max_cpus = 0;
+#endif
+	cpu_idle_poll_ctrl(true);
 }
 
 static inline void of_register_trusted_foundations(void)
@@ -59,7 +66,7 @@ static inline void of_register_trusted_foundations(void)
 	 * If we find the target should enable TF but does not support it,
 	 * fail as the system won't be able to do much anyway
 	 */
-	if (of_find_compatible_node(NULL, NULL, "tl,trusted-foundations"))
+	if (of_find_compatible_node(NULL, NULL, "tlm,trusted-foundations"))
 		register_trusted_foundations(NULL);
 }
 #endif /* CONFIG_TRUSTED_FOUNDATIONS */
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 72abdc541f38..75d95799b6e6 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -19,7 +19,7 @@
 #include <asm/unified.h>
 #include <asm/compiler.h>
 
-#if __LINUX_ARM_ARCH__ < 6
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 #include <asm-generic/uaccess-unaligned.h>
 #else
 #define __get_user_unaligned __get_user
@@ -171,8 +171,9 @@ extern int __put_user_8(void *, unsigned long long);
 #define __put_user_check(x,p)							\
 	({								\
 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
+		const typeof(*(p)) __user *__tmp_p = (p);		\
 		register const typeof(*(p)) __r2 asm("r2") = (x);	\
-		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
 		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index acabef1a75df..43876245fc57 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -48,6 +48,5 @@
  */
 #define __IGNORE_fadvise64_64
 #define __IGNORE_migrate_pages
-#define __IGNORE_kcmp
 
 #endif /* __ASM_ARM_UNISTD_H */
diff --git a/arch/arm/include/asm/uprobes.h b/arch/arm/include/asm/uprobes.h
new file mode 100644
index 000000000000..9472c20b7d49
--- /dev/null
+++ b/arch/arm/include/asm/uprobes.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2012 Rabin Vincent <rabin at rab.in>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_UPROBES_H
+#define _ASM_UPROBES_H
+
+#include <asm/probes.h>
+#include <asm/opcodes.h>
+
+typedef u32 uprobe_opcode_t;
+
+#define MAX_UINSN_BYTES		4
+#define UPROBE_XOL_SLOT_BYTES	64
+
+#define UPROBE_SWBP_ARM_INSN	0xe7f001f9
+#define UPROBE_SS_ARM_INSN	0xe7f001fa
+#define UPROBE_SWBP_INSN	__opcode_to_mem_arm(UPROBE_SWBP_ARM_INSN)
+#define UPROBE_SWBP_INSN_SIZE	4
+
+struct arch_uprobe_task {
+	u32 backup;
+	unsigned long	saved_trap_no;
+};
+
+struct arch_uprobe {
+	u8 insn[MAX_UINSN_BYTES];
+	unsigned long ixol[2];
+	uprobe_opcode_t bpinsn;
+	bool simulate;
+	u32 pcreg;
+	void (*prehandler)(struct arch_uprobe *auprobe,
+			   struct arch_uprobe_task *autask,
+			   struct pt_regs *regs);
+	void (*posthandler)(struct arch_uprobe *auprobe,
+			    struct arch_uprobe_task *autask,
+			    struct pt_regs *regs);
+	struct arch_probes_insn asi;
+};
+
+#endif
diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h
index 7704e28c3483..712b50e0a6dc 100644
--- a/arch/arm/include/asm/xen/hypercall.h
+++ b/arch/arm/include/asm/xen/hypercall.h
@@ -34,6 +34,7 @@
 #define _ASM_ARM_XEN_HYPERCALL_H
 
 #include <xen/interface/xen.h>
+#include <xen/interface/sched.h>
 
 long privcmd_call(unsigned call, unsigned long a1,
 		unsigned long a2, unsigned long a3,
@@ -48,6 +49,16 @@ int HYPERVISOR_memory_op(unsigned int cmd, void *arg);
 int HYPERVISOR_physdev_op(int cmd, void *arg);
 int HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args);
 int HYPERVISOR_tmem_op(void *arg);
+int HYPERVISOR_multicall(struct multicall_entry *calls, uint32_t nr);
+
+static inline int
+HYPERVISOR_suspend(unsigned long start_info_mfn)
+{
+	struct sched_shutdown r = { .reason = SHUTDOWN_suspend };
+
+	/* start_info_mfn is unused on ARM */
+	return HYPERVISOR_sched_op(SCHEDOP_shutdown, &r);
+}
 
 static inline void
 MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va,
@@ -63,9 +74,4 @@ MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req,
 	BUG();
 }
 
-static inline int
-HYPERVISOR_multicall(void *call_list, int nr_calls)
-{
-	BUG();
-}
 #endif /* _ASM_ARM_XEN_HYPERCALL_H */
diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h
index 1151188bcd83..50066006e6bd 100644
--- a/arch/arm/include/asm/xen/interface.h
+++ b/arch/arm/include/asm/xen/interface.h
@@ -40,6 +40,8 @@ typedef uint64_t xen_pfn_t;
 #define PRI_xen_pfn "llx"
 typedef uint64_t xen_ulong_t;
 #define PRI_xen_ulong "llx"
+typedef int64_t xen_long_t;
+#define PRI_xen_long "llx"
 /* Guest handles for primitive C types. */
 __DEFINE_GUEST_HANDLE(uchar, unsigned char);
 __DEFINE_GUEST_HANDLE(uint,  unsigned int);
diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h
index e0965abacb7d..ded062f9b358 100644
--- a/arch/arm/include/asm/xen/page.h
+++ b/arch/arm/include/asm/xen/page.h
@@ -77,7 +77,6 @@ static inline xpaddr_t machine_to_phys(xmaddr_t machine)
 }
 /* VIRT <-> MACHINE conversion */
 #define virt_to_machine(v)	(phys_to_machine(XPADDR(__pa(v))))
-#define virt_to_pfn(v)          (PFN_DOWN(__pa(v)))
 #define virt_to_mfn(v)		(pfn_to_mfn(virt_to_pfn(v)))
 #define mfn_to_virt(m)		(__va(mfn_to_pfn(m) << PAGE_SHIFT))
 
@@ -97,16 +96,13 @@ static inline pte_t *lookup_address(unsigned long address, unsigned int *level)
 	return NULL;
 }
 
-static inline int m2p_add_override(unsigned long mfn, struct page *page,
-		struct gnttab_map_grant_ref *kmap_op)
-{
-	return 0;
-}
+extern int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops,
+				   struct gnttab_map_grant_ref *kmap_ops,
+				   struct page **pages, unsigned int count);
 
-static inline int m2p_remove_override(struct page *page, bool clear_pte)
-{
-	return 0;
-}
+extern int clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops,
+				     struct gnttab_map_grant_ref *kmap_ops,
+				     struct page **pages, unsigned int count);
 
 bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn);
 bool __set_phys_to_machine_multi(unsigned long pfn, unsigned long mfn,
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index 42b823cd2d22..032a316eb802 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -81,6 +81,15 @@
 #define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR
 #define IMX6SL_UART_BASE(n)	IMX6SL_UART_BASE_ADDR(n)
 
+#define IMX6SX_UART1_BASE_ADDR	0x02020000
+#define IMX6SX_UART2_BASE_ADDR	0x021e8000
+#define IMX6SX_UART3_BASE_ADDR	0x021ec000
+#define IMX6SX_UART4_BASE_ADDR	0x021f0000
+#define IMX6SX_UART5_BASE_ADDR	0x021f4000
+#define IMX6SX_UART6_BASE_ADDR	0x022a0000
+#define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR
+#define IMX6SX_UART_BASE(n)	IMX6SX_UART_BASE_ADDR(n)
+
 #define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT)
 
 #ifdef CONFIG_DEBUG_IMX1_UART
@@ -103,6 +112,8 @@
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6Q)
 #elif defined(CONFIG_DEBUG_IMX6SL_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6SL)
+#elif defined(CONFIG_DEBUG_IMX6SX_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6SX)
 #endif
 
 #endif /* __DEBUG_IMX_UART_H */
diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S
index 9d653d475903..9ef57612811d 100644
--- a/arch/arm/include/debug/msm.S
+++ b/arch/arm/include/debug/msm.S
@@ -15,51 +15,15 @@
  *
  */
 
-#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_QSD8X50)
-#define MSM_UART1_PHYS        0xA9A00000
-#define MSM_UART2_PHYS        0xA9B00000
-#define MSM_UART3_PHYS        0xA9C00000
-#elif defined(CONFIG_ARCH_MSM7X30)
-#define MSM_UART1_PHYS        0xACA00000
-#define MSM_UART2_PHYS        0xACB00000
-#define MSM_UART3_PHYS        0xACC00000
-#endif
-
-#if defined(CONFIG_DEBUG_MSM_UART1)
-#define MSM_DEBUG_UART_BASE	0xE1000000
-#define MSM_DEBUG_UART_PHYS	MSM_UART1_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART2)
-#define MSM_DEBUG_UART_BASE	0xE1000000
-#define MSM_DEBUG_UART_PHYS	MSM_UART2_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART3)
-#define MSM_DEBUG_UART_BASE	0xE1000000
-#define MSM_DEBUG_UART_PHYS	MSM_UART3_PHYS
-#endif
-
-#ifdef CONFIG_DEBUG_MSM8660_UART
-#define MSM_DEBUG_UART_BASE	0xF0040000
-#define MSM_DEBUG_UART_PHYS	0x19C40000
-#endif
-
-#ifdef CONFIG_DEBUG_MSM8960_UART
-#define MSM_DEBUG_UART_BASE	0xF0040000
-#define MSM_DEBUG_UART_PHYS	0x16440000
-#endif
-
-#ifdef CONFIG_DEBUG_MSM8974_UART
-#define MSM_DEBUG_UART_BASE	0xFA71E000
-#define MSM_DEBUG_UART_PHYS	0xF991E000
-#endif
-
 	.macro	addruart, rp, rv, tmp
-#ifdef MSM_DEBUG_UART_PHYS
-	ldr	\rp, =MSM_DEBUG_UART_PHYS
-	ldr	\rv, =MSM_DEBUG_UART_BASE
+#ifdef CONFIG_DEBUG_UART_PHYS
+	ldr	\rp, =CONFIG_DEBUG_UART_PHYS
+	ldr	\rv, =CONFIG_DEBUG_UART_VIRT
 #endif
 	.endm
 
 	.macro	senduart, rd, rx
-#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+#ifdef CONFIG_DEBUG_QCOM_UARTDM
 	@ Write the 1 character to UARTDM_TF
 	str	\rd, [\rx, #0x70]
 #else
@@ -68,7 +32,7 @@
 	.endm
 
 	.macro	waituart, rd, rx
-#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+#ifdef CONFIG_DEBUG_QCOM_UARTDM
 	@ check for TX_EMT in UARTDM_SR
 	ldr	\rd, [\rx, #0x08]
 	tst	\rd, #0x08
diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S
new file mode 100644
index 000000000000..b1f54dc4888c
--- /dev/null
+++ b/arch/arm/include/debug/s3c24xx.S
@@ -0,0 +1,46 @@
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Copyright (C) 2005 Simtec Electronics
+ *
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_s3c.h>
+
+#define S3C2410_UART1_OFF (0x4000)
+
+	.macro addruart, rp, rv, tmp
+		ldr	\rp, = CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, = CONFIG_DEBUG_UART_VIRT
+	.endm
+
+	.macro  fifo_full_s3c2410 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+	.endm
+
+	.macro fifo_level_s3c2410 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+	.endm
+
+/* Select the correct implementation depending on the configuration. The
+ * S3C2440 will get selected by default, as these are the most widely
+ * used variants of these
+*/
+
+#if defined(CONFIG_DEBUG_S3C2410_UART)
+#define fifo_full  fifo_full_s3c2410
+#define fifo_level fifo_level_s3c2410
+#endif
+
+/* include the reset of the code which will do the work */
+
+#include <debug/samsung.S>
diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S
index f3a9cff6d5d4..8d8d922e5e44 100644
--- a/arch/arm/include/debug/samsung.S
+++ b/arch/arm/include/debug/samsung.S
@@ -9,7 +9,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <plat/regs-serial.h>
+#include <linux/serial_s3c.h>
 
 /* The S5PV210/S5PC110 implementations are as belows. */
 
diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S
index f98763f0bc17..3bc80599c022 100644
--- a/arch/arm/include/debug/tegra.S
+++ b/arch/arm/include/debug/tegra.S
@@ -53,8 +53,7 @@
 
 #define checkuart(rp, rv, lhu, bit, uart) \
 		/* Load address of CLK_RST register */ \
-		movw	rp, #TEGRA_CLK_RST_DEVICES_##lhu & 0xffff ; \
-		movt	rp, #TEGRA_CLK_RST_DEVICES_##lhu >> 16 ; \
+		ldr	rp, =TEGRA_CLK_RST_DEVICES_##lhu ; \
 		/* Load value from CLK_RST register */ \
 		ldr	rp, [rp, #0] ; \
 		/* Test UART's reset bit */ \
@@ -62,8 +61,7 @@
 		/* If set, can't use UART; jump to save no UART */ \
 		bne	90f ; \
 		/* Load address of CLK_OUT_ENB register */ \
-		movw	rp, #TEGRA_CLK_OUT_ENB_##lhu & 0xffff ; \
-		movt	rp, #TEGRA_CLK_OUT_ENB_##lhu >> 16 ; \
+		ldr	rp, =TEGRA_CLK_OUT_ENB_##lhu ; \
 		/* Load value from CLK_OUT_ENB register */ \
 		ldr	rp, [rp, #0] ; \
 		/* Test UART's clock enable bit */ \
@@ -71,8 +69,7 @@
 		/* If clear, can't use UART; jump to save no UART */ \
 		beq	90f ; \
 		/* Passed all tests, load address of UART registers */ \
-		movw	rp, #TEGRA_UART##uart##_BASE & 0xffff ; \
-		movt	rp, #TEGRA_UART##uart##_BASE >> 16 ; \
+		ldr	rp, =TEGRA_UART##uart##_BASE ; \
 		/* Jump to save UART address */ \
 		b 91f
 
@@ -90,15 +87,16 @@
 
 #ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
 		/* Check ODMDATA */
-10:		movw	\rp, #TEGRA_PMC_SCRATCH20 & 0xffff
-		movt	\rp, #TEGRA_PMC_SCRATCH20 >> 16
+10:		ldr	\rp, =TEGRA_PMC_SCRATCH20
 		ldr	\rp, [\rp, #0]		@ Load PMC_SCRATCH20
-		ubfx	\rv, \rp, #18, #2	@ 19:18 are console type
+		lsr	\rv, \rp, #18		@ 19:18 are console type
+		and	\rv, \rv, #3
 		cmp	\rv, #2			@ 2 and 3 mean DCC, UART
 		beq	11f			@ some boards swap the meaning
 		cmp	\rv, #3			@ so accept either
 		bne	90f
-11:		ubfx	\rv, \rp, #15, #3	@ 17:15 are UART ID
+11:		lsr	\rv, \rp, #15		@ 17:15 are UART ID
+		and	\rv, #7	
 		cmp	\rv, #0			@ UART 0?
 		beq	20f
 		cmp	\rv, #1			@ UART 1?
diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S
index ba12cc44b2cb..b88933849a17 100644
--- a/arch/arm/include/debug/vf.S
+++ b/arch/arm/include/debug/vf.S
@@ -7,9 +7,20 @@
  *
  */
 
+#define VF_UART0_BASE_ADDR	0x40027000
+#define VF_UART1_BASE_ADDR	0x40028000
+#define VF_UART2_BASE_ADDR	0x40029000
+#define VF_UART3_BASE_ADDR	0x4002a000
+#define VF_UART_BASE_ADDR(n)	VF_UART##n##_BASE_ADDR
+#define VF_UART_BASE(n)		VF_UART_BASE_ADDR(n)
+#define VF_UART_PHYSICAL_BASE	VF_UART_BASE(CONFIG_DEBUG_VF_UART_PORT)
+
+#define VF_UART_VIRTUAL_BASE	0xfe000000
+
 	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =0x40028000	@ physical
-	ldr	\rv, =0xfe028000	@ virtual
+	ldr	\rp, =VF_UART_PHYSICAL_BASE 	@ physical
+	and	\rv, \rp, #0xffffff		@ offset within 16MB section
+	add	\rv, \rv, #VF_UART_VIRTUAL_BASE
 	.endm
 
 	.macro	senduart, rd, rx
diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S
index f9aa9740a73f..bd13dedbdeff 100644
--- a/arch/arm/include/debug/zynq.S
+++ b/arch/arm/include/debug/zynq.S
@@ -20,18 +20,18 @@
 #define UART_SR_TXEMPTY		0x00000008	/* TX FIFO empty */
 
 #define UART0_PHYS		0xE0000000
+#define UART0_VIRT		0xF0000000
 #define UART1_PHYS		0xE0001000
-#define UART_SIZE		SZ_4K
-#define UART_VIRT		0xF0001000
+#define UART1_VIRT		0xF0001000
 
 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
 # define LL_UART_PADDR		UART1_PHYS
+# define LL_UART_VADDR		UART1_VIRT
 #else
 # define LL_UART_PADDR		UART0_PHYS
+# define LL_UART_VADDR		UART0_VIRT
 #endif
 
-#define LL_UART_VADDR		UART_VIRT
-
 		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =LL_UART_PADDR	@ physical
 		ldr	\rv, =LL_UART_VADDR	@ virtual
@@ -42,10 +42,15 @@
 		.endm
 
 		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UART_SR_OFFSET]
+ARM_BE8(	rev	\rd, \rd )
+		tst	\rd, #UART_SR_TXEMPTY
+		beq	1001b
 		.endm
 
 		.macro	busyuart,rd,rx
 1002:		ldr	\rd, [\rx, #UART_SR_OFFSET]	@ get status register
+ARM_BE8(	rev	\rd, \rd )
 		tst	\rd, #UART_SR_TXFULL		@
 		bne	1002b			@ wait if FIFO is full
 		.endm
diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h
index 7dcc10d67253..20d12f230a2f 100644
--- a/arch/arm/include/uapi/asm/hwcap.h
+++ b/arch/arm/include/uapi/asm/hwcap.h
@@ -28,4 +28,13 @@
 #define HWCAP_LPAE	(1 << 20)
 #define HWCAP_EVTSTRM	(1 << 21)
 
+/*
+ * HWCAP2 flags - for elf_hwcap2 (in kernel) and AT_HWCAP2
+ */
+#define HWCAP2_AES	(1 << 0)
+#define HWCAP2_PMULL	(1 << 1)
+#define HWCAP2_SHA1	(1 << 2)
+#define HWCAP2_SHA2	(1 << 3)
+#define HWCAP2_CRC32	(1 << 4)
+
 #endif /* _UAPI__ASMARM_HWCAP_H */
diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h
index ef0c8785ba16..e6ebdd3471e5 100644
--- a/arch/arm/include/uapi/asm/kvm.h
+++ b/arch/arm/include/uapi/asm/kvm.h
@@ -20,6 +20,7 @@
 #define __ARM_KVM_H__
 
 #include <linux/types.h>
+#include <linux/psci.h>
 #include <asm/ptrace.h>
 
 #define __KVM_HAVE_GUEST_DEBUG
@@ -83,6 +84,7 @@ struct kvm_regs {
 #define KVM_VGIC_V2_CPU_SIZE		0x2000
 
 #define KVM_ARM_VCPU_POWER_OFF		0 /* CPU is started in OFF state */
+#define KVM_ARM_VCPU_PSCI_0_2		1 /* CPU uses PSCI v0.2 */
 
 struct kvm_vcpu_init {
 	__u32 target;
@@ -201,9 +203,9 @@ struct kvm_arch_memory_slot {
 #define KVM_PSCI_FN_CPU_ON		KVM_PSCI_FN(2)
 #define KVM_PSCI_FN_MIGRATE		KVM_PSCI_FN(3)
 
-#define KVM_PSCI_RET_SUCCESS		0
-#define KVM_PSCI_RET_NI			((unsigned long)-1)
-#define KVM_PSCI_RET_INVAL		((unsigned long)-2)
-#define KVM_PSCI_RET_DENIED		((unsigned long)-3)
+#define KVM_PSCI_RET_SUCCESS		PSCI_RET_SUCCESS
+#define KVM_PSCI_RET_NI			PSCI_RET_NOT_SUPPORTED
+#define KVM_PSCI_RET_INVAL		PSCI_RET_INVALID_PARAMS
+#define KVM_PSCI_RET_DENIED		PSCI_RET_DENIED
 
 #endif /* __ARM_KVM_H__ */
diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h
index fb5584d0cc05..ba94446c72d9 100644
--- a/arch/arm/include/uapi/asm/unistd.h
+++ b/arch/arm/include/uapi/asm/unistd.h
@@ -408,6 +408,7 @@
 #define __NR_finit_module		(__NR_SYSCALL_BASE+379)
 #define __NR_sched_setattr		(__NR_SYSCALL_BASE+380)
 #define __NR_sched_getattr		(__NR_SYSCALL_BASE+381)
+#define __NR_renameat2			(__NR_SYSCALL_BASE+382)
 
 /*
  * This may need to be greater than __NR_last_syscall+1 in order to
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index a30fc9be9e9e..38ddd9f83d0e 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_ARM_CPU_SUSPEND)	+= sleep.o suspend.o
+obj-$(CONFIG_HIBERNATION)	+= hibernate.o
 obj-$(CONFIG_SMP)		+= smp.o
 ifdef CONFIG_MMU
 obj-$(CONFIG_SMP)		+= smp_tlb.o
@@ -50,11 +51,12 @@ obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o insn.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o insn.o
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o insn.o patch.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
-obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-common.o patch.o
+obj-$(CONFIG_UPROBES)		+= probes.o probes-arm.o uprobes.o uprobes-arm.o
+obj-$(CONFIG_KPROBES)		+= probes.o kprobes.o kprobes-common.o patch.o
 ifdef CONFIG_THUMB2_KERNEL
-obj-$(CONFIG_KPROBES)		+= kprobes-thumb.o
+obj-$(CONFIG_KPROBES)		+= kprobes-thumb.o probes-thumb.o
 else
-obj-$(CONFIG_KPROBES)		+= kprobes-arm.o
+obj-$(CONFIG_KPROBES)		+= kprobes-arm.o probes-arm.o
 endif
 obj-$(CONFIG_ARM_KPROBES_TEST)	+= test-kprobes.o
 test-kprobes-objs		:= kprobes-test.o
@@ -78,6 +80,7 @@ obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_PJ4)		+= pj4-cp0.o
+obj-$(CONFIG_CPU_PJ4B)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_regs.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o perf_event_cpu.o
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 85e664b6a5f1..f7b450f97e68 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -158,6 +158,6 @@ EXPORT_SYMBOL(__gnu_mcount_nc);
 #endif
 
 #ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-EXPORT_SYMBOL(__pv_phys_offset);
+EXPORT_SYMBOL(__pv_phys_pfn_offset);
 EXPORT_SYMBOL(__pv_offset);
 #endif
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index ded041711beb..85598b5d1efd 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -174,6 +174,7 @@ int main(void)
   DEFINE(VCPU_FIQ_REGS,		offsetof(struct kvm_vcpu, arch.regs.fiq_regs));
   DEFINE(VCPU_PC,		offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_pc));
   DEFINE(VCPU_CPSR,		offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_cpsr));
+  DEFINE(VCPU_HCR,		offsetof(struct kvm_vcpu, arch.hcr));
   DEFINE(VCPU_IRQ_LINES,	offsetof(struct kvm_vcpu, arch.irq_lines));
   DEFINE(VCPU_HSR,		offsetof(struct kvm_vcpu, arch.fault.hsr));
   DEFINE(VCPU_HxFAR,		offsetof(struct kvm_vcpu, arch.fault.hxfar));
diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c
index 8c14de8180c0..7807ef58a2ab 100644
--- a/arch/arm/kernel/atags_parse.c
+++ b/arch/arm/kernel/atags_parse.c
@@ -22,6 +22,7 @@
 #include <linux/fs.h>
 #include <linux/root_dev.h>
 #include <linux/screen_info.h>
+#include <linux/memblock.h>
 
 #include <asm/setup.h>
 #include <asm/system_info.h>
@@ -222,10 +223,10 @@ setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
 	}
 
 	if (mdesc->fixup)
-		mdesc->fixup(tags, &from, &meminfo);
+		mdesc->fixup(tags, &from);
 
 	if (tags->hdr.tag == ATAG_CORE) {
-		if (meminfo.nr_banks != 0)
+		if (memblock_phys_mem_size())
 			squash_mem_tags(tags);
 		save_atags(tags);
 		parse_tags(tags);
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 317da88ae65b..17a26c17f7f5 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -19,7 +19,7 @@
 static int debug_pci;
 
 /*
- * We can't use pci_find_device() here since we are
+ * We can't use pci_get_device() here since we are
  * called from interrupt context.
  */
 static void pcibios_bus_report_status(struct pci_bus *bus, u_int status_mask, int warn)
@@ -57,13 +57,10 @@ static void pcibios_bus_report_status(struct pci_bus *bus, u_int status_mask, in
 
 void pcibios_report_status(u_int status_mask, int warn)
 {
-	struct list_head *l;
-
-	list_for_each(l, &pci_root_buses) {
-		struct pci_bus *bus = pci_bus_b(l);
+	struct pci_bus *bus;
 
+	list_for_each_entry(bus, &pci_root_buses, node)
 		pcibios_bus_report_status(bus, status_mask, warn);
-	}
 }
 
 /*
@@ -548,6 +545,18 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
 		 */
 		pci_bus_add_devices(bus);
 	}
+
+	list_for_each_entry(sys, &head, node) {
+		struct pci_bus *bus = sys->bus;
+
+		/* Configure PCI Express settings */
+		if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
+			struct pci_bus *child;
+
+			list_for_each_entry(child, &bus->children, node)
+				pcie_bus_configure_settings(child);
+		}
+	}
 }
 
 #ifndef CONFIG_PCI_HOST_ITE8152
@@ -608,41 +617,10 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
  */
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
+	if (pci_has_flag(PCI_PROBE_ONLY))
+		return 0;
 
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < 6; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1 << idx)))
-			continue;
-
-		r = dev->resource + idx;
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because"
-			       " of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-
-	/*
-	 * Bridges (eg, cardbus bridges) need to be fully enabled
-	 */
-	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
-		cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-
-	if (cmd != old_cmd) {
-		printk("PCI: enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
+	return pci_enable_resources(dev, mask);
 }
 
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 166e945de832..8f51bdcdacbb 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -391,6 +391,7 @@
 		CALL(sys_finit_module)
 /* 380 */	CALL(sys_sched_setattr)
 		CALL(sys_sched_getattr)
+		CALL(sys_renameat2)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/crash_dump.c b/arch/arm/kernel/crash_dump.c
index 90c50d4b43f7..5d1286d51154 100644
--- a/arch/arm/kernel/crash_dump.c
+++ b/arch/arm/kernel/crash_dump.c
@@ -39,7 +39,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 	if (!csize)
 		return 0;
 
-	vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+	vaddr = ioremap(__pfn_to_phys(pfn), PAGE_SIZE);
 	if (!vaddr)
 		return -ENOMEM;
 
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index f751714d52c1..e94a157ddff1 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -18,6 +18,7 @@
 #include <linux/of_fdt.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/smp.h>
 
 #include <asm/cputype.h>
 #include <asm/setup.h>
@@ -26,42 +27,37 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-{
-	arm_add_memory(base, size);
-}
 
-void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
-{
-	return memblock_virt_alloc(size, align);
-}
+#ifdef CONFIG_SMP
+extern struct of_cpu_method __cpu_method_of_table[];
+
+static const struct of_cpu_method __cpu_method_of_table_sentinel
+	__used __section(__cpu_method_of_table_end);
 
-void __init arm_dt_memblock_reserve(void)
+
+static int __init set_smp_ops_by_method(struct device_node *node)
 {
-	u64 *reserve_map, base, size;
+	const char *method;
+	struct of_cpu_method *m = __cpu_method_of_table;
 
-	if (!initial_boot_params)
-		return;
+	if (of_property_read_string(node, "enable-method", &method))
+		return 0;
 
-	/* Reserve the dtb region */
-	memblock_reserve(virt_to_phys(initial_boot_params),
-			 be32_to_cpu(initial_boot_params->totalsize));
+	for (; m->method; m++)
+		if (!strcmp(m->method, method)) {
+			smp_set_ops(m->ops);
+			return 1;
+		}
 
-	/*
-	 * Process the reserve map.  This will probably overlap the initrd
-	 * and dtb locations which are already reserved, but overlaping
-	 * doesn't hurt anything
-	 */
-	reserve_map = ((void*)initial_boot_params) +
-			be32_to_cpu(initial_boot_params->off_mem_rsvmap);
-	while (1) {
-		base = be64_to_cpup(reserve_map++);
-		size = be64_to_cpup(reserve_map++);
-		if (!size)
-			break;
-		memblock_reserve(base, size);
-	}
+	return 0;
 }
+#else
+static inline int set_smp_ops_by_method(struct device_node *node)
+{
+	return 1;
+}
+#endif
+
 
 /*
  * arm_dt_init_cpu_maps - Function retrieves cpu nodes from the device tree
@@ -79,6 +75,7 @@ void __init arm_dt_init_cpu_maps(void)
 	 * read as 0.
 	 */
 	struct device_node *cpu, *cpus;
+	int found_method = 0;
 	u32 i, j, cpuidx = 1;
 	u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0;
 
@@ -150,8 +147,18 @@ void __init arm_dt_init_cpu_maps(void)
 		}
 
 		tmp_map[i] = hwid;
+
+		if (!found_method)
+			found_method = set_smp_ops_by_method(cpu);
 	}
 
+	/*
+	 * Fallback to an enable-method in the cpus node if nothing found in
+	 * a cpu node.
+	 */
+	if (!found_method)
+		set_smp_ops_by_method(cpus);
+
 	if (!bootcpu_valid) {
 		pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n");
 		return;
@@ -212,7 +219,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 
 	if (!mdesc) {
 		const char *prop;
-		long size;
+		int size;
 		unsigned long dt_root;
 
 		early_print("\nError: unrecognized/unsupported "
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 1879e8dd2acc..52a949a8077d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -344,7 +344,7 @@ ENDPROC(__pabt_svc)
 	@
 	@ Enable the alignment trap while in kernel mode
 	@
-	alignment_trap r0
+	alignment_trap r0, .LCcralign
 
 	@
 	@ Clear FP to mark the first stack frame
@@ -413,6 +413,11 @@ __und_usr:
 	@
 	adr	r9, BSYM(ret_from_exception)
 
+	@ IRQs must be enabled before attempting to read the instruction from
+	@ user space since that could cause a page/translation fault if the
+	@ page table was modified by another CPU.
+	enable_irq
+
 	tst	r3, #PSR_T_BIT			@ Thumb mode?
 	bne	__und_usr_thumb
 	sub	r4, r2, #4			@ ARM instr at LR - 4
@@ -484,7 +489,8 @@ ENDPROC(__und_usr)
  */
 	.pushsection .fixup, "ax"
 	.align	2
-4:	mov	pc, r9
+4:	str     r4, [sp, #S_PC]			@ retry current instruction
+	mov	pc, r9
 	.popsection
 	.pushsection __ex_table,"a"
 	.long	1b, 4b
@@ -517,7 +523,7 @@ ENDPROC(__und_usr)
  *  r9  = normal "successful" return address
  *  r10 = this threads thread_info structure
  *  lr  = unrecognised instruction return address
- * IRQs disabled, FIQs enabled.
+ * IRQs enabled, FIQs enabled.
  */
 	@
 	@ Fall-through from Thumb-2 __und_usr
@@ -624,7 +630,6 @@ call_fpe:
 #endif
 
 do_fpe:
-	enable_irq
 	ldr	r4, .LCfp
 	add	r10, r10, #TI_FPSTATE		@ r10 = workspace
 	ldr	pc, [r4]			@ Call FP module USR entry point
@@ -652,8 +657,7 @@ __und_usr_fault_32:
 	b	1f
 __und_usr_fault_16:
 	mov	r1, #2
-1:	enable_irq
-	mov	r0, sp
+1:	mov	r0, sp
 	adr	lr, BSYM(ret_from_exception)
 	b	__und_fault
 ENDPROC(__und_usr_fault_32)
@@ -1143,11 +1147,8 @@ __vectors_start:
 	.data
 
 	.globl	cr_alignment
-	.globl	cr_no_alignment
 cr_alignment:
 	.space	4
-cr_no_alignment:
-	.space	4
 
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	.globl	handle_arch_irq
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index a2dcafdf1bc8..7139d4a7dea7 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -365,13 +365,7 @@ ENTRY(vector_swi)
 	str	r0, [sp, #S_OLD_R0]		@ Save OLD_R0
 #endif
 	zero_fp
-
-#ifdef CONFIG_ALIGNMENT_TRAP
-	ldr	ip, __cr_alignment
-	ldr	ip, [ip]
-	mcr	p15, 0, ip, c1, c0		@ update control register
-#endif
-
+	alignment_trap ip, __cr_alignment
 	enable_irq
 	ct_user_exit
 	get_thread_info tsk
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 39f89fbd5111..5d702f8900b1 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -37,9 +37,9 @@
 #endif
 	.endm
 
-	.macro	alignment_trap, rtemp
+	.macro	alignment_trap, rtemp, label
 #ifdef CONFIG_ALIGNMENT_TRAP
-	ldr	\rtemp, .LCcralign
+	ldr	\rtemp, \label
 	ldr	\rtemp, [\rtemp]
 	mcr	p15, 0, \rtemp, c1, c0
 #endif
@@ -132,6 +132,10 @@
 	orrne	r5, V7M_xPSR_FRAMEPTRALIGN
 	biceq	r5, V7M_xPSR_FRAMEPTRALIGN
 
+	@ ensure bit 0 is cleared in the PC, otherwise behaviour is
+	@ unpredictable
+	bic	r4, #1
+
 	@ write basic exception frame
 	stmdb	r2!, {r1, r3-r5}
 	ldmia	sp, {r1, r3-r5}
@@ -236,11 +240,6 @@
 	movs	pc, lr				@ return & move spsr_svc into cpsr
 	.endm
 
-	.macro	get_thread_info, rd
-	mov	\rd, sp, lsr #13
-	mov	\rd, \rd, lsl #13
-	.endm
-
 	@
 	@ 32-bit wide "mov pc, reg"
 	@
@@ -306,12 +305,6 @@
 	.endm
 #endif	/* ifdef CONFIG_CPU_V7M / else */
 
-	.macro	get_thread_info, rd
-	mov	\rd, sp
-	lsr	\rd, \rd, #13
-	mov	\rd, \rd, lsl #13
-	.endm
-
 	@
 	@ 32-bit wide "mov pc, reg"
 	@
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 34e56647dcee..af9a8a927a4e 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -14,6 +14,7 @@
 
 #include <linux/ftrace.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 
 #include <asm/cacheflush.h>
 #include <asm/opcodes.h>
@@ -63,6 +64,18 @@ static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
 }
 #endif
 
+int ftrace_arch_code_modify_prepare(void)
+{
+	set_all_modules_text_rw();
+	return 0;
+}
+
+int ftrace_arch_code_modify_post_process(void)
+{
+	set_all_modules_text_ro();
+	return 0;
+}
+
 static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
 {
 	return arm_gen_branch_link(pc, addr);
@@ -156,10 +169,8 @@ int ftrace_make_nop(struct module *mod,
 	return ret;
 }
 
-int __init ftrace_dyn_arch_init(void *data)
+int __init ftrace_dyn_arch_init(void)
 {
-	*(unsigned long *)data = 0;
-
 	return 0;
 }
 #endif /* CONFIG_DYNAMIC_FTRACE */
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index c96ecacb2021..572a38335c96 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -99,8 +99,7 @@ __mmap_switched:
 	str	r1, [r5]			@ Save machine type
 	str	r2, [r6]			@ Save atags pointer
 	cmp	r7, #0
-	bicne	r4, r0, #CR_A			@ Clear 'A' bit
-	stmneia	r7, {r0, r4}			@ Save control register values
+	strne	r0, [r7]			@ Save control register values
 	b	start_kernel
 ENDPROC(__mmap_switched)
 
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index f5f381d91556..2c35f0ff2fdc 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -475,7 +475,7 @@ ENDPROC(__turn_mmu_on)
 
 
 #ifdef CONFIG_SMP_ON_UP
-	__INIT
+	__HEAD
 __fixup_smp:
 	and	r3, r9, #0x000f0000	@ architecture version
 	teq	r3, #0x000f0000		@ CPU ID supported?
@@ -584,9 +584,10 @@ __fixup_pv_table:
 	subs	r3, r0, r3	@ PHYS_OFFSET - PAGE_OFFSET
 	add	r4, r4, r3	@ adjust table start address
 	add	r5, r5, r3	@ adjust table end address
-	add	r6, r6, r3	@ adjust __pv_phys_offset address
+	add	r6, r6, r3	@ adjust __pv_phys_pfn_offset address
 	add	r7, r7, r3	@ adjust __pv_offset address
-	str	r8, [r6, #LOW_OFFSET]	@ save computed PHYS_OFFSET to __pv_phys_offset
+	mov	r0, r8, lsr #12	@ convert to PFN
+	str	r0, [r6]	@ save computed PHYS_OFFSET to __pv_phys_pfn_offset
 	strcc	ip, [r7, #HIGH_OFFSET]	@ save to __pv_offset high bits
 	mov	r6, r3, lsr #24	@ constant for add/sub instructions
 	teq	r3, r6, lsl #24 @ must be 16MiB aligned
@@ -600,7 +601,7 @@ ENDPROC(__fixup_pv_table)
 1:	.long	.
 	.long	__pv_table_begin
 	.long	__pv_table_end
-2:	.long	__pv_phys_offset
+2:	.long	__pv_phys_pfn_offset
 	.long	__pv_offset
 
 	.text
@@ -688,11 +689,11 @@ ENTRY(fixup_pv_table)
 ENDPROC(fixup_pv_table)
 
 	.data
-	.globl	__pv_phys_offset
-	.type	__pv_phys_offset, %object
-__pv_phys_offset:
-	.quad	0
-	.size	__pv_phys_offset, . -__pv_phys_offset
+	.globl	__pv_phys_pfn_offset
+	.type	__pv_phys_pfn_offset, %object
+__pv_phys_pfn_offset:
+	.word	0
+	.size	__pv_phys_pfn_offset, . -__pv_phys_pfn_offset
 
 	.globl	__pv_offset
 	.type	__pv_offset, %object
diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c
new file mode 100644
index 000000000000..bb8b79648643
--- /dev/null
+++ b/arch/arm/kernel/hibernate.c
@@ -0,0 +1,107 @@
+/*
+ * Hibernation support specific for ARM
+ *
+ * Derived from work on ARM hibernation support by:
+ *
+ * Ubuntu project, hibernation support for mach-dove
+ * Copyright (C) 2010 Nokia Corporation (Hiroshi Doyu)
+ * Copyright (C) 2010 Texas Instruments, Inc. (Teerth Reddy et al.)
+ *  https://lkml.org/lkml/2010/6/18/4
+ *  https://lists.linux-foundation.org/pipermail/linux-pm/2010-June/027422.html
+ *  https://patchwork.kernel.org/patch/96442/
+ *
+ * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/mm.h>
+#include <linux/suspend.h>
+#include <asm/system_misc.h>
+#include <asm/idmap.h>
+#include <asm/suspend.h>
+#include <asm/memory.h>
+
+extern const void __nosave_begin, __nosave_end;
+
+int pfn_is_nosave(unsigned long pfn)
+{
+	unsigned long nosave_begin_pfn = virt_to_pfn(&__nosave_begin);
+	unsigned long nosave_end_pfn = virt_to_pfn(&__nosave_end - 1);
+
+	return (pfn >= nosave_begin_pfn) && (pfn <= nosave_end_pfn);
+}
+
+void notrace save_processor_state(void)
+{
+	WARN_ON(num_online_cpus() != 1);
+	local_fiq_disable();
+}
+
+void notrace restore_processor_state(void)
+{
+	local_fiq_enable();
+}
+
+/*
+ * Snapshot kernel memory and reset the system.
+ *
+ * swsusp_save() is executed in the suspend finisher so that the CPU
+ * context pointer and memory are part of the saved image, which is
+ * required by the resume kernel image to restart execution from
+ * swsusp_arch_suspend().
+ *
+ * soft_restart is not technically needed, but is used to get success
+ * returned from cpu_suspend.
+ *
+ * When soft reboot completes, the hibernation snapshot is written out.
+ */
+static int notrace arch_save_image(unsigned long unused)
+{
+	int ret;
+
+	ret = swsusp_save();
+	if (ret == 0)
+		soft_restart(virt_to_phys(cpu_resume));
+	return ret;
+}
+
+/*
+ * Save the current CPU state before suspend / poweroff.
+ */
+int notrace swsusp_arch_suspend(void)
+{
+	return cpu_suspend(0, arch_save_image);
+}
+
+/*
+ * Restore page contents for physical pages that were in use during loading
+ * hibernation image.  Switch to idmap_pgd so the physical page tables
+ * are overwritten with the same contents.
+ */
+static void notrace arch_restore_image(void *unused)
+{
+	struct pbe *pbe;
+
+	cpu_switch_mm(idmap_pgd, &init_mm);
+	for (pbe = restore_pblist; pbe; pbe = pbe->next)
+		copy_page(pbe->orig_address, pbe->address);
+
+	soft_restart(virt_to_phys(cpu_resume));
+}
+
+static u64 resume_stack[PAGE_SIZE/2/sizeof(u64)] __nosavedata;
+
+/*
+ * Resume from the hibernation image.
+ * Due to the kernel heap / data restore, stack contents change underneath
+ * and that would make function calls impossible; switch to a temporary
+ * stack within the nosave region to avoid that problem.
+ */
+int swsusp_arch_resume(void)
+{
+	extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
+	call_with_stack(arch_restore_image, 0,
+		resume_stack + ARRAY_SIZE(resume_stack));
+	return 0;
+}
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 3d446605cbf8..4d963fb66e3f 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -167,7 +167,7 @@ static int debug_arch_supported(void)
 /* Can we determine the watchpoint access type from the fsr? */
 static int debug_exception_updates_fsr(void)
 {
-	return 0;
+	return get_debug_arch() >= ARM_DEBUG_ARCH_V8;
 }
 
 /* Determine number of WRP registers available. */
@@ -257,6 +257,7 @@ static int enable_monitor_mode(void)
 		break;
 	case ARM_DEBUG_ARCH_V7_ECP14:
 	case ARM_DEBUG_ARCH_V7_1:
+	case ARM_DEBUG_ARCH_V8:
 		ARM_DBG_WRITE(c0, c2, 2, (dscr | ARM_DSCR_MDBGEN));
 		isb();
 		break;
@@ -1072,6 +1073,8 @@ static int __init arch_hw_breakpoint_init(void)
 	core_num_brps = get_num_brps();
 	core_num_wrps = get_num_wrps();
 
+	cpu_notifier_register_begin();
+
 	/*
 	 * We need to tread carefully here because DBGSWENABLE may be
 	 * driven low on this core and there isn't an architected way to
@@ -1088,6 +1091,7 @@ static int __init arch_hw_breakpoint_init(void)
 	if (!cpumask_empty(&debug_err_mask)) {
 		core_num_brps = 0;
 		core_num_wrps = 0;
+		cpu_notifier_register_done();
 		return 0;
 	}
 
@@ -1107,7 +1111,10 @@ static int __init arch_hw_breakpoint_init(void)
 			TRAP_HWBKPT, "breakpoint debug exception");
 
 	/* Register hotplug and PM notifiers. */
-	register_cpu_notifier(&dbg_reset_nb);
+	__register_cpu_notifier(&dbg_reset_nb);
+
+	cpu_notifier_register_done();
+
 	pm_init();
 	return 0;
 }
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 9723d17b8f38..2c4257604513 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -37,6 +37,7 @@
 #include <linux/proc_fs.h>
 #include <linux/export.h>
 
+#include <asm/hardware/cache-l2x0.h>
 #include <asm/exception.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -115,10 +116,21 @@ EXPORT_SYMBOL_GPL(set_irq_flags);
 
 void __init init_IRQ(void)
 {
+	int ret;
+
 	if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq)
 		irqchip_init();
 	else
 		machine_desc->init_irq();
+
+	if (IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_CACHE_L2X0) &&
+	    (machine_desc->l2c_aux_mask || machine_desc->l2c_aux_val)) {
+		outer_cache.write_sec = machine_desc->l2c_write_sec;
+		ret = l2x0_of_init(machine_desc->l2c_aux_val,
+				   machine_desc->l2c_aux_mask);
+		if (ret)
+			pr_err("L2C: failed to init: %d\n", ret);
+	}
 }
 
 #ifdef CONFIG_MULTI_IRQ_HANDLER
diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c
index 346485910732..9d1cf7156895 100644
--- a/arch/arm/kernel/isa.c
+++ b/arch/arm/kernel/isa.c
@@ -20,7 +20,7 @@
 
 static unsigned int isa_membase, isa_portbase, isa_portshift;
 
-static ctl_table ctl_isa_vars[4] = {
+static struct ctl_table ctl_isa_vars[4] = {
 	{
 		.procname	= "membase",
 		.data		= &isa_membase, 
@@ -44,7 +44,7 @@ static ctl_table ctl_isa_vars[4] = {
 
 static struct ctl_table_header *isa_sysctl_header;
 
-static ctl_table ctl_isa[2] = {
+static struct ctl_table ctl_isa[2] = {
 	{
 		.procname	= "isa",
 		.mode		= 0555,
@@ -52,7 +52,7 @@ static ctl_table ctl_isa[2] = {
 	}, {}
 };
 
-static ctl_table ctl_bus[2] = {
+static struct ctl_table ctl_bus[2] = {
 	{
 		.procname	= "bus",
 		.mode		= 0555,
diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index a08783823b32..a5599cfc43cb 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -18,13 +18,18 @@
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
+#include <asm/assembler.h>
 
-#if defined(CONFIG_CPU_PJ4)
+#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
 #define PJ4(code...)		code
 #define XSC(code...)
-#else
+#elif defined(CONFIG_CPU_MOHAWK) || \
+	defined(CONFIG_CPU_XSC3) || \
+	defined(CONFIG_CPU_XSCALE)
 #define PJ4(code...)
 #define XSC(code...)		code
+#else
+#error "Unsupported iWMMXt architecture"
 #endif
 
 #define MMX_WR0		 	(0x00)
@@ -61,17 +66,18 @@
  * r9  = ret_from_exception
  * lr  = undefined instr exit
  *
- * called from prefetch exception handler with interrupts disabled
+ * called from prefetch exception handler with interrupts enabled
  */
 
 ENTRY(iwmmxt_task_enable)
+	inc_preempt_count r10, r3
 
 	XSC(mrc	p15, 0, r2, c15, c1, 0)
 	PJ4(mrc p15, 0, r2, c1, c0, 2)
 	@ CP0 and CP1 accessible?
 	XSC(tst	r2, #0x3)
 	PJ4(tst	r2, #0xf)
-	movne	pc, lr				@ if so no business here
+	bne	4f				@ if so no business here
 	@ enable access to CP0 and CP1
 	XSC(orr	r2, r2, #0x3)
 	XSC(mcr	p15, 0, r2, c15, c1, 0)
@@ -132,7 +138,7 @@ concan_dump:
 	wstrd	wR15, [r1, #MMX_WR15]
 
 2:	teq	r0, #0				@ anything to load?
-	moveq	pc, lr
+	beq	3f
 
 concan_load:
 
@@ -165,8 +171,14 @@ concan_load:
 	@ clear CUP/MUP (only if r1 != 0)
 	teq	r1, #0
 	mov 	r2, #0
-	moveq	pc, lr
+	beq	3f
 	tmcr	wCon, r2
+
+3:
+#ifdef CONFIG_PREEMPT_COUNT
+	get_thread_info r10
+#endif
+4:	dec_preempt_count r10, r3
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c
index 8a30c89da70e..ac300c60d656 100644
--- a/arch/arm/kernel/kprobes-arm.c
+++ b/arch/arm/kernel/kprobes-arm.c
@@ -60,13 +60,10 @@
 
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
-#include <linux/module.h>
+#include <linux/ptrace.h>
 
 #include "kprobes.h"
-
-#define sign_extend(x, signbit) ((x) | (0 - ((x) & (1 << (signbit)))))
-
-#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25)
+#include "probes-arm.h"
 
 #if  __LINUX_ARM_ARCH__ >= 6
 #define BLX(reg)	"blx	"reg"		\n\t"
@@ -75,92 +72,11 @@
 			"mov	pc, "reg"	\n\t"
 #endif
 
-/*
- * To avoid the complications of mimicing single-stepping on a
- * processor without a Next-PC or a single-step mode, and to
- * avoid having to deal with the side-effects of boosting, we
- * simulate or emulate (almost) all ARM instructions.
- *
- * "Simulation" is where the instruction's behavior is duplicated in
- * C code.  "Emulation" is where the original instruction is rewritten
- * and executed, often by altering its registers.
- *
- * By having all behavior of the kprobe'd instruction completed before
- * returning from the kprobe_handler(), all locks (scheduler and
- * interrupt) can safely be released.  There is no need for secondary
- * breakpoints, no race with MP or preemptable kernels, nor having to
- * clean up resources counts at a later time impacting overall system
- * performance.  By rewriting the instruction, only the minimum registers
- * need to be loaded and saved back optimizing performance.
- *
- * Calling the insnslot_*_rwflags version of a function doesn't hurt
- * anything even when the CPSR flags aren't updated by the
- * instruction.  It's just a little slower in return for saving
- * a little space by not having a duplicate function that doesn't
- * update the flags.  (The same optimization can be said for
- * instructions that do or don't perform register writeback)
- * Also, instructions can either read the flags, only write the
- * flags, or read and write the flags.  To save combinations
- * rather than for sheer performance, flag functions just assume
- * read and write of flags.
- */
-
-static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	long iaddr = (long)p->addr;
-	int disp  = branch_displacement(insn);
-
-	if (insn & (1 << 24))
-		regs->ARM_lr = iaddr + 4;
-
-	regs->ARM_pc = iaddr + 8 + disp;
-}
-
-static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	long iaddr = (long)p->addr;
-	int disp = branch_displacement(insn);
-
-	regs->ARM_lr = iaddr + 4;
-	regs->ARM_pc = iaddr + 8 + disp + ((insn >> 23) & 0x2);
-	regs->ARM_cpsr |= PSR_T_BIT;
-}
-
-static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rm = insn & 0xf;
-	long rmv = regs->uregs[rm];
-
-	if (insn & (1 << 5))
-		regs->ARM_lr = (long)p->addr + 4;
-
-	regs->ARM_pc = rmv & ~0x1;
-	regs->ARM_cpsr &= ~PSR_T_BIT;
-	if (rmv & 0x1)
-		regs->ARM_cpsr |= PSR_T_BIT;
-}
-
-static void __kprobes simulate_mrs(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rd = (insn >> 12) & 0xf;
-	unsigned long mask = 0xf8ff03df; /* Mask out execution state */
-	regs->uregs[rd] = regs->ARM_cpsr & mask;
-}
-
-static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs)
-{
-	regs->uregs[12] = regs->uregs[13];
-}
-
 static void __kprobes
-emulate_ldrdstrd(struct kprobe *p, struct pt_regs *regs)
+emulate_ldrdstrd(probes_opcode_t insn,
+	struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = (unsigned long)p->addr + 8;
+	unsigned long pc = regs->ARM_pc + 4;
 	int rt = (insn >> 12) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;
@@ -175,7 +91,7 @@ emulate_ldrdstrd(struct kprobe *p, struct pt_regs *regs)
 		BLX("%[fn]")
 		: "=r" (rtv), "=r" (rt2v), "=r" (rnv)
 		: "0" (rtv), "1" (rt2v), "2" (rnv), "r" (rmv),
-		  [fn] "r" (p->ainsn.insn_fn)
+		  [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -186,10 +102,10 @@ emulate_ldrdstrd(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-emulate_ldr(struct kprobe *p, struct pt_regs *regs)
+emulate_ldr(probes_opcode_t insn,
+	struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = (unsigned long)p->addr + 8;
+	unsigned long pc = regs->ARM_pc + 4;
 	int rt = (insn >> 12) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;
@@ -202,7 +118,7 @@ emulate_ldr(struct kprobe *p, struct pt_regs *regs)
 	__asm__ __volatile__ (
 		BLX("%[fn]")
 		: "=r" (rtv), "=r" (rnv)
-		: "1" (rnv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn)
+		: "1" (rnv), "r" (rmv), [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -216,11 +132,11 @@ emulate_ldr(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-emulate_str(struct kprobe *p, struct pt_regs *regs)
+emulate_str(probes_opcode_t insn,
+	struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long rtpc = (unsigned long)p->addr + str_pc_offset;
-	unsigned long rnpc = (unsigned long)p->addr + 8;
+	unsigned long rtpc = regs->ARM_pc - 4 + str_pc_offset;
+	unsigned long rnpc = regs->ARM_pc + 4;
 	int rt = (insn >> 12) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;
@@ -234,7 +150,7 @@ emulate_str(struct kprobe *p, struct pt_regs *regs)
 	__asm__ __volatile__ (
 		BLX("%[fn]")
 		: "=r" (rnv)
-		: "r" (rtv), "0" (rnv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn)
+		: "r" (rtv), "0" (rnv), "r" (rmv), [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -243,10 +159,10 @@ emulate_str(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-emulate_rd12rn16rm0rs8_rwflags(struct kprobe *p, struct pt_regs *regs)
+emulate_rd12rn16rm0rs8_rwflags(probes_opcode_t insn,
+	struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = (unsigned long)p->addr + 8;
+	unsigned long pc = regs->ARM_pc + 4;
 	int rd = (insn >> 12) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;
@@ -266,7 +182,7 @@ emulate_rd12rn16rm0rs8_rwflags(struct kprobe *p, struct pt_regs *regs)
 		"mrs	%[cpsr], cpsr		\n\t"
 		: "=r" (rdv), [cpsr] "=r" (cpsr)
 		: "0" (rdv), "r" (rnv), "r" (rmv), "r" (rsv),
-		  "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
+		  "1" (cpsr), [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -278,9 +194,9 @@ emulate_rd12rn16rm0rs8_rwflags(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-emulate_rd12rn16rm0_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
+emulate_rd12rn16rm0_rwflags_nopc(probes_opcode_t insn,
+	struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	int rd = (insn >> 12) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;
@@ -296,7 +212,7 @@ emulate_rd12rn16rm0_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
 		"mrs	%[cpsr], cpsr		\n\t"
 		: "=r" (rdv), [cpsr] "=r" (cpsr)
 		: "0" (rdv), "r" (rnv), "r" (rmv),
-		  "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
+		  "1" (cpsr), [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -305,9 +221,10 @@ emulate_rd12rn16rm0_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-emulate_rd16rn12rm0rs8_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
+emulate_rd16rn12rm0rs8_rwflags_nopc(probes_opcode_t insn,
+	struct arch_probes_insn *asi,
+	struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	int rd = (insn >> 16) & 0xf;
 	int rn = (insn >> 12) & 0xf;
 	int rm = insn & 0xf;
@@ -325,7 +242,7 @@ emulate_rd16rn12rm0rs8_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
 		"mrs	%[cpsr], cpsr		\n\t"
 		: "=r" (rdv), [cpsr] "=r" (cpsr)
 		: "0" (rdv), "r" (rnv), "r" (rmv), "r" (rsv),
-		  "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
+		  "1" (cpsr), [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -334,9 +251,9 @@ emulate_rd16rn12rm0rs8_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-emulate_rd12rm0_noflags_nopc(struct kprobe *p, struct pt_regs *regs)
+emulate_rd12rm0_noflags_nopc(probes_opcode_t insn,
+	struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	int rd = (insn >> 12) & 0xf;
 	int rm = insn & 0xf;
 
@@ -346,7 +263,7 @@ emulate_rd12rm0_noflags_nopc(struct kprobe *p, struct pt_regs *regs)
 	__asm__ __volatile__ (
 		BLX("%[fn]")
 		: "=r" (rdv)
-		: "0" (rdv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn)
+		: "0" (rdv), "r" (rmv), [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -354,9 +271,10 @@ emulate_rd12rm0_noflags_nopc(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-emulate_rdlo12rdhi16rn0rm8_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
+emulate_rdlo12rdhi16rn0rm8_rwflags_nopc(probes_opcode_t insn,
+	struct arch_probes_insn *asi,
+	struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	int rdlo = (insn >> 12) & 0xf;
 	int rdhi = (insn >> 16) & 0xf;
 	int rn = insn & 0xf;
@@ -374,7 +292,7 @@ emulate_rdlo12rdhi16rn0rm8_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
 		"mrs	%[cpsr], cpsr		\n\t"
 		: "=r" (rdlov), "=r" (rdhiv), [cpsr] "=r" (cpsr)
 		: "0" (rdlov), "1" (rdhiv), "r" (rnv), "r" (rmv),
-		  "2" (cpsr), [fn] "r" (p->ainsn.insn_fn)
+		  "2" (cpsr), [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -383,623 +301,43 @@ emulate_rdlo12rdhi16rn0rm8_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
 	regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
 }
 
-/*
- * For the instruction masking and comparisons in all the "space_*"
- * functions below, Do _not_ rearrange the order of tests unless
- * you're very, very sure of what you are doing.  For the sake of
- * efficiency, the masks for some tests sometimes assume other test
- * have been done prior to them so the number of patterns to test
- * for an instruction set can be as broad as possible to reduce the
- * number of tests needed.
- */
-
-static const union decode_item arm_1111_table[] = {
-	/* Unconditional instructions					*/
-
-	/* memory hint		1111 0100 x001 xxxx xxxx xxxx xxxx xxxx */
-	/* PLDI (immediate)	1111 0100 x101 xxxx xxxx xxxx xxxx xxxx */
-	/* PLDW (immediate)	1111 0101 x001 xxxx xxxx xxxx xxxx xxxx */
-	/* PLD (immediate)	1111 0101 x101 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_SIMULATE	(0xfe300000, 0xf4100000, kprobe_simulate_nop),
-
-	/* memory hint		1111 0110 x001 xxxx xxxx xxxx xxx0 xxxx */
-	/* PLDI (register)	1111 0110 x101 xxxx xxxx xxxx xxx0 xxxx */
-	/* PLDW (register)	1111 0111 x001 xxxx xxxx xxxx xxx0 xxxx */
-	/* PLD (register)	1111 0111 x101 xxxx xxxx xxxx xxx0 xxxx */
-	DECODE_SIMULATE	(0xfe300010, 0xf6100000, kprobe_simulate_nop),
-
-	/* BLX (immediate)	1111 101x xxxx xxxx xxxx xxxx xxxx xxxx */
-	DECODE_SIMULATE	(0xfe000000, 0xfa000000, simulate_blx1),
-
-	/* CPS			1111 0001 0000 xxx0 xxxx xxxx xx0x xxxx */
-	/* SETEND		1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
-	/* SRS			1111 100x x1x0 xxxx xxxx xxxx xxxx xxxx */
-	/* RFE			1111 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
-
-	/* Coprocessor instructions... */
-	/* MCRR2		1111 1100 0100 xxxx xxxx xxxx xxxx xxxx */
-	/* MRRC2		1111 1100 0101 xxxx xxxx xxxx xxxx xxxx */
-	/* LDC2			1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
-	/* STC2			1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
-	/* CDP2			1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
-	/* MCR2			1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
-	/* MRC2			1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
-
-	/* Other unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_0001_0xx0____0xxx_table[] = {
-	/* Miscellaneous instructions					*/
-
-	/* MRS cpsr		cccc 0001 0000 xxxx xxxx xxxx 0000 xxxx */
-	DECODE_SIMULATEX(0x0ff000f0, 0x01000000, simulate_mrs,
-						 REGS(0, NOPC, 0, 0, 0)),
-
-	/* BX			cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */
-	DECODE_SIMULATE	(0x0ff000f0, 0x01200010, simulate_blx2bx),
-
-	/* BLX (register)	cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */
-	DECODE_SIMULATEX(0x0ff000f0, 0x01200030, simulate_blx2bx,
-						 REGS(0, 0, 0, 0, NOPC)),
-
-	/* CLZ			cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */
-	DECODE_EMULATEX	(0x0ff000f0, 0x01600010, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, NOPC)),
-
-	/* QADD			cccc 0001 0000 xxxx xxxx xxxx 0101 xxxx */
-	/* QSUB			cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx */
-	/* QDADD		cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx */
-	/* QDSUB		cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx */
-	DECODE_EMULATEX	(0x0f9000f0, 0x01000050, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-
-	/* BXJ			cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
-	/* MSR			cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
-	/* MRS spsr		cccc 0001 0100 xxxx xxxx xxxx 0000 xxxx */
-	/* BKPT			1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
-	/* SMC			cccc 0001 0110 xxxx xxxx xxxx 0111 xxxx */
-	/* And unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_0001_0xx0____1xx0_table[] = {
-	/* Halfword multiply and multiply-accumulate			*/
-
-	/* SMLALxy		cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */
-	DECODE_EMULATEX	(0x0ff00090, 0x01400080, emulate_rdlo12rdhi16rn0rm8_rwflags_nopc,
-						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
-
-	/* SMULWy		cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */
-	DECODE_OR	(0x0ff000b0, 0x012000a0),
-	/* SMULxy		cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */
-	DECODE_EMULATEX	(0x0ff00090, 0x01600080, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, 0, NOPC, 0, NOPC)),
-
-	/* SMLAxy		cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx */
-	DECODE_OR	(0x0ff00090, 0x01000080),
-	/* SMLAWy		cccc 0001 0010 xxxx xxxx xxxx 1x00 xxxx */
-	DECODE_EMULATEX	(0x0ff000b0, 0x01200080, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
-
-	DECODE_END
+const union decode_action kprobes_arm_actions[NUM_PROBES_ARM_ACTIONS] = {
+	[PROBES_EMULATE_NONE] = {.handler = probes_emulate_none},
+	[PROBES_SIMULATE_NOP] = {.handler = probes_simulate_nop},
+	[PROBES_PRELOAD_IMM] = {.handler = probes_simulate_nop},
+	[PROBES_PRELOAD_REG] = {.handler = probes_simulate_nop},
+	[PROBES_BRANCH_IMM] = {.handler = simulate_blx1},
+	[PROBES_MRS] = {.handler = simulate_mrs},
+	[PROBES_BRANCH_REG] = {.handler = simulate_blx2bx},
+	[PROBES_CLZ] = {.handler = emulate_rd12rm0_noflags_nopc},
+	[PROBES_SATURATING_ARITHMETIC] = {
+		.handler = emulate_rd12rn16rm0_rwflags_nopc},
+	[PROBES_MUL1] = {.handler = emulate_rdlo12rdhi16rn0rm8_rwflags_nopc},
+	[PROBES_MUL2] = {.handler = emulate_rd16rn12rm0rs8_rwflags_nopc},
+	[PROBES_SWP] = {.handler = emulate_rd12rn16rm0_rwflags_nopc},
+	[PROBES_LDRSTRD] = {.handler = emulate_ldrdstrd},
+	[PROBES_LOAD_EXTRA] = {.handler = emulate_ldr},
+	[PROBES_LOAD] = {.handler = emulate_ldr},
+	[PROBES_STORE_EXTRA] = {.handler = emulate_str},
+	[PROBES_STORE] = {.handler = emulate_str},
+	[PROBES_MOV_IP_SP] = {.handler = simulate_mov_ipsp},
+	[PROBES_DATA_PROCESSING_REG] = {
+		.handler = emulate_rd12rn16rm0rs8_rwflags},
+	[PROBES_DATA_PROCESSING_IMM] = {
+		.handler = emulate_rd12rn16rm0rs8_rwflags},
+	[PROBES_MOV_HALFWORD] = {.handler = emulate_rd12rm0_noflags_nopc},
+	[PROBES_SEV] = {.handler = probes_emulate_none},
+	[PROBES_WFE] = {.handler = probes_simulate_nop},
+	[PROBES_SATURATE] = {.handler = emulate_rd12rn16rm0_rwflags_nopc},
+	[PROBES_REV] = {.handler = emulate_rd12rm0_noflags_nopc},
+	[PROBES_MMI] = {.handler = emulate_rd12rn16rm0_rwflags_nopc},
+	[PROBES_PACK] = {.handler = emulate_rd12rn16rm0_rwflags_nopc},
+	[PROBES_EXTEND] = {.handler = emulate_rd12rm0_noflags_nopc},
+	[PROBES_EXTEND_ADD] = {.handler = emulate_rd12rn16rm0_rwflags_nopc},
+	[PROBES_MUL_ADD_LONG] = {
+		.handler = emulate_rdlo12rdhi16rn0rm8_rwflags_nopc},
+	[PROBES_MUL_ADD] = {.handler = emulate_rd16rn12rm0rs8_rwflags_nopc},
+	[PROBES_BITFIELD] = {.handler = emulate_rd12rm0_noflags_nopc},
+	[PROBES_BRANCH] = {.handler = simulate_bbl},
+	[PROBES_LDMSTM] = {.decoder = kprobe_decode_ldmstm}
 };
-
-static const union decode_item arm_cccc_0000_____1001_table[] = {
-	/* Multiply and multiply-accumulate				*/
-
-	/* MUL			cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx */
-	/* MULS			cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx */
-	DECODE_EMULATEX	(0x0fe000f0, 0x00000090, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, 0, NOPC, 0, NOPC)),
-
-	/* MLA			cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx */
-	/* MLAS			cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx */
-	DECODE_OR	(0x0fe000f0, 0x00200090),
-	/* MLS			cccc 0000 0110 xxxx xxxx xxxx 1001 xxxx */
-	DECODE_EMULATEX	(0x0ff000f0, 0x00600090, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
-
-	/* UMAAL		cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx */
-	DECODE_OR	(0x0ff000f0, 0x00400090),
-	/* UMULL		cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx */
-	/* UMULLS		cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx */
-	/* UMLAL		cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx */
-	/* UMLALS		cccc 0000 1011 xxxx xxxx xxxx 1001 xxxx */
-	/* SMULL		cccc 0000 1100 xxxx xxxx xxxx 1001 xxxx */
-	/* SMULLS		cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx */
-	/* SMLAL		cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx */
-	/* SMLALS		cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx */
-	DECODE_EMULATEX	(0x0f8000f0, 0x00800090, emulate_rdlo12rdhi16rn0rm8_rwflags_nopc,
-						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_0001_____1001_table[] = {
-	/* Synchronization primitives					*/
-
-#if __LINUX_ARM_ARCH__ < 6
-	/* Deprecated on ARMv6 and may be UNDEFINED on v7		*/
-	/* SMP/SWPB		cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */
-	DECODE_EMULATEX	(0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-#endif
-	/* LDREX/STREX{,D,B,H}	cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */
-	/* And unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_000x_____1xx1_table[] = {
-	/* Extra load/store instructions				*/
-
-	/* STRHT		cccc 0000 xx10 xxxx xxxx xxxx 1011 xxxx */
-	/* ???			cccc 0000 xx10 xxxx xxxx xxxx 11x1 xxxx */
-	/* LDRHT		cccc 0000 xx11 xxxx xxxx xxxx 1011 xxxx */
-	/* LDRSBT		cccc 0000 xx11 xxxx xxxx xxxx 1101 xxxx */
-	/* LDRSHT		cccc 0000 xx11 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_REJECT	(0x0f200090, 0x00200090),
-
-	/* LDRD/STRD lr,pc,{...	cccc 000x x0x0 xxxx 111x xxxx 1101 xxxx */
-	DECODE_REJECT	(0x0e10e0d0, 0x0000e0d0),
-
-	/* LDRD (register)	cccc 000x x0x0 xxxx xxxx xxxx 1101 xxxx */
-	/* STRD (register)	cccc 000x x0x0 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_EMULATEX	(0x0e5000d0, 0x000000d0, emulate_ldrdstrd,
-						 REGS(NOPCWB, NOPCX, 0, 0, NOPC)),
-
-	/* LDRD (immediate)	cccc 000x x1x0 xxxx xxxx xxxx 1101 xxxx */
-	/* STRD (immediate)	cccc 000x x1x0 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_EMULATEX	(0x0e5000d0, 0x004000d0, emulate_ldrdstrd,
-						 REGS(NOPCWB, NOPCX, 0, 0, 0)),
-
-	/* STRH (register)	cccc 000x x0x0 xxxx xxxx xxxx 1011 xxxx */
-	DECODE_EMULATEX	(0x0e5000f0, 0x000000b0, emulate_str,
-						 REGS(NOPCWB, NOPC, 0, 0, NOPC)),
-
-	/* LDRH (register)	cccc 000x x0x1 xxxx xxxx xxxx 1011 xxxx */
-	/* LDRSB (register)	cccc 000x x0x1 xxxx xxxx xxxx 1101 xxxx */
-	/* LDRSH (register)	cccc 000x x0x1 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_EMULATEX	(0x0e500090, 0x00100090, emulate_ldr,
-						 REGS(NOPCWB, NOPC, 0, 0, NOPC)),
-
-	/* STRH (immediate)	cccc 000x x1x0 xxxx xxxx xxxx 1011 xxxx */
-	DECODE_EMULATEX	(0x0e5000f0, 0x004000b0, emulate_str,
-						 REGS(NOPCWB, NOPC, 0, 0, 0)),
-
-	/* LDRH (immediate)	cccc 000x x1x1 xxxx xxxx xxxx 1011 xxxx */
-	/* LDRSB (immediate)	cccc 000x x1x1 xxxx xxxx xxxx 1101 xxxx */
-	/* LDRSH (immediate)	cccc 000x x1x1 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_EMULATEX	(0x0e500090, 0x00500090, emulate_ldr,
-						 REGS(NOPCWB, NOPC, 0, 0, 0)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_000x_table[] = {
-	/* Data-processing (register)					*/
-
-	/* <op>S PC, ...	cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx */
-	DECODE_REJECT	(0x0e10f000, 0x0010f000),
-
-	/* MOV IP, SP		1110 0001 1010 0000 1100 0000 0000 1101 */
-	DECODE_SIMULATE	(0xffffffff, 0xe1a0c00d, simulate_mov_ipsp),
-
-	/* TST (register)	cccc 0001 0001 xxxx xxxx xxxx xxx0 xxxx */
-	/* TEQ (register)	cccc 0001 0011 xxxx xxxx xxxx xxx0 xxxx */
-	/* CMP (register)	cccc 0001 0101 xxxx xxxx xxxx xxx0 xxxx */
-	/* CMN (register)	cccc 0001 0111 xxxx xxxx xxxx xxx0 xxxx */
-	DECODE_EMULATEX	(0x0f900010, 0x01100000, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(ANY, 0, 0, 0, ANY)),
-
-	/* MOV (register)	cccc 0001 101x xxxx xxxx xxxx xxx0 xxxx */
-	/* MVN (register)	cccc 0001 111x xxxx xxxx xxxx xxx0 xxxx */
-	DECODE_EMULATEX	(0x0fa00010, 0x01a00000, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(0, ANY, 0, 0, ANY)),
-
-	/* AND (register)	cccc 0000 000x xxxx xxxx xxxx xxx0 xxxx */
-	/* EOR (register)	cccc 0000 001x xxxx xxxx xxxx xxx0 xxxx */
-	/* SUB (register)	cccc 0000 010x xxxx xxxx xxxx xxx0 xxxx */
-	/* RSB (register)	cccc 0000 011x xxxx xxxx xxxx xxx0 xxxx */
-	/* ADD (register)	cccc 0000 100x xxxx xxxx xxxx xxx0 xxxx */
-	/* ADC (register)	cccc 0000 101x xxxx xxxx xxxx xxx0 xxxx */
-	/* SBC (register)	cccc 0000 110x xxxx xxxx xxxx xxx0 xxxx */
-	/* RSC (register)	cccc 0000 111x xxxx xxxx xxxx xxx0 xxxx */
-	/* ORR (register)	cccc 0001 100x xxxx xxxx xxxx xxx0 xxxx */
-	/* BIC (register)	cccc 0001 110x xxxx xxxx xxxx xxx0 xxxx */
-	DECODE_EMULATEX	(0x0e000010, 0x00000000, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(ANY, ANY, 0, 0, ANY)),
-
-	/* TST (reg-shift reg)	cccc 0001 0001 xxxx xxxx xxxx 0xx1 xxxx */
-	/* TEQ (reg-shift reg)	cccc 0001 0011 xxxx xxxx xxxx 0xx1 xxxx */
-	/* CMP (reg-shift reg)	cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */
-	/* CMN (reg-shift reg)	cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */
-	DECODE_EMULATEX	(0x0f900090, 0x01100010, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(ANY, 0, NOPC, 0, ANY)),
-
-	/* MOV (reg-shift reg)	cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */
-	/* MVN (reg-shift reg)	cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */
-	DECODE_EMULATEX	(0x0fa00090, 0x01a00010, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(0, ANY, NOPC, 0, ANY)),
-
-	/* AND (reg-shift reg)	cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */
-	/* EOR (reg-shift reg)	cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */
-	/* SUB (reg-shift reg)	cccc 0000 010x xxxx xxxx xxxx 0xx1 xxxx */
-	/* RSB (reg-shift reg)	cccc 0000 011x xxxx xxxx xxxx 0xx1 xxxx */
-	/* ADD (reg-shift reg)	cccc 0000 100x xxxx xxxx xxxx 0xx1 xxxx */
-	/* ADC (reg-shift reg)	cccc 0000 101x xxxx xxxx xxxx 0xx1 xxxx */
-	/* SBC (reg-shift reg)	cccc 0000 110x xxxx xxxx xxxx 0xx1 xxxx */
-	/* RSC (reg-shift reg)	cccc 0000 111x xxxx xxxx xxxx 0xx1 xxxx */
-	/* ORR (reg-shift reg)	cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */
-	/* BIC (reg-shift reg)	cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */
-	DECODE_EMULATEX	(0x0e000090, 0x00000010, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(ANY, ANY, NOPC, 0, ANY)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_001x_table[] = {
-	/* Data-processing (immediate)					*/
-
-	/* MOVW			cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */
-	/* MOVT			cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0fb00000, 0x03000000, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, 0)),
-
-	/* YIELD		cccc 0011 0010 0000 xxxx xxxx 0000 0001 */
-	DECODE_OR	(0x0fff00ff, 0x03200001),
-	/* SEV			cccc 0011 0010 0000 xxxx xxxx 0000 0100 */
-	DECODE_EMULATE	(0x0fff00ff, 0x03200004, kprobe_emulate_none),
-	/* NOP			cccc 0011 0010 0000 xxxx xxxx 0000 0000 */
-	/* WFE			cccc 0011 0010 0000 xxxx xxxx 0000 0010 */
-	/* WFI			cccc 0011 0010 0000 xxxx xxxx 0000 0011 */
-	DECODE_SIMULATE	(0x0fff00fc, 0x03200000, kprobe_simulate_nop),
-	/* DBG			cccc 0011 0010 0000 xxxx xxxx ffff xxxx */
-	/* unallocated hints	cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */
-	/* MSR (immediate)	cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0x0fb00000, 0x03200000),
-
-	/* <op>S PC, ...	cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx */
-	DECODE_REJECT	(0x0e10f000, 0x0210f000),
-
-	/* TST (immediate)	cccc 0011 0001 xxxx xxxx xxxx xxxx xxxx */
-	/* TEQ (immediate)	cccc 0011 0011 xxxx xxxx xxxx xxxx xxxx */
-	/* CMP (immediate)	cccc 0011 0101 xxxx xxxx xxxx xxxx xxxx */
-	/* CMN (immediate)	cccc 0011 0111 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0f900000, 0x03100000, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(ANY, 0, 0, 0, 0)),
-
-	/* MOV (immediate)	cccc 0011 101x xxxx xxxx xxxx xxxx xxxx */
-	/* MVN (immediate)	cccc 0011 111x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0fa00000, 0x03a00000, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(0, ANY, 0, 0, 0)),
-
-	/* AND (immediate)	cccc 0010 000x xxxx xxxx xxxx xxxx xxxx */
-	/* EOR (immediate)	cccc 0010 001x xxxx xxxx xxxx xxxx xxxx */
-	/* SUB (immediate)	cccc 0010 010x xxxx xxxx xxxx xxxx xxxx */
-	/* RSB (immediate)	cccc 0010 011x xxxx xxxx xxxx xxxx xxxx */
-	/* ADD (immediate)	cccc 0010 100x xxxx xxxx xxxx xxxx xxxx */
-	/* ADC (immediate)	cccc 0010 101x xxxx xxxx xxxx xxxx xxxx */
-	/* SBC (immediate)	cccc 0010 110x xxxx xxxx xxxx xxxx xxxx */
-	/* RSC (immediate)	cccc 0010 111x xxxx xxxx xxxx xxxx xxxx */
-	/* ORR (immediate)	cccc 0011 100x xxxx xxxx xxxx xxxx xxxx */
-	/* BIC (immediate)	cccc 0011 110x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0e000000, 0x02000000, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(ANY, ANY, 0, 0, 0)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_0110_____xxx1_table[] = {
-	/* Media instructions						*/
-
-	/* SEL			cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx */
-	DECODE_EMULATEX	(0x0ff000f0, 0x068000b0, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-
-	/* SSAT			cccc 0110 101x xxxx xxxx xxxx xx01 xxxx */
-	/* USAT			cccc 0110 111x xxxx xxxx xxxx xx01 xxxx */
-	DECODE_OR(0x0fa00030, 0x06a00010),
-	/* SSAT16		cccc 0110 1010 xxxx xxxx xxxx 0011 xxxx */
-	/* USAT16		cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx */
-	DECODE_EMULATEX	(0x0fb000f0, 0x06a00030, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(0, NOPC, 0, 0, NOPC)),
-
-	/* REV			cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */
-	/* REV16		cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */
-	/* RBIT			cccc 0110 1111 xxxx xxxx xxxx 0011 xxxx */
-	/* REVSH		cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */
-	DECODE_EMULATEX	(0x0fb00070, 0x06b00030, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, NOPC)),
-
-	/* ???			cccc 0110 0x00 xxxx xxxx xxxx xxx1 xxxx */
-	DECODE_REJECT	(0x0fb00010, 0x06000010),
-	/* ???			cccc 0110 0xxx xxxx xxxx xxxx 1011 xxxx */
-	DECODE_REJECT	(0x0f8000f0, 0x060000b0),
-	/* ???			cccc 0110 0xxx xxxx xxxx xxxx 1101 xxxx */
-	DECODE_REJECT	(0x0f8000f0, 0x060000d0),
-	/* SADD16		cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx */
-	/* SADDSUBX		cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx */
-	/* SSUBADDX		cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx */
-	/* SSUB16		cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx */
-	/* SADD8		cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx */
-	/* SSUB8		cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx */
-	/* QADD16		cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx */
-	/* QADDSUBX		cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx */
-	/* QSUBADDX		cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx */
-	/* QSUB16		cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx */
-	/* QADD8		cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx */
-	/* QSUB8		cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx */
-	/* SHADD16		cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx */
-	/* SHADDSUBX		cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx */
-	/* SHSUBADDX		cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx */
-	/* SHSUB16		cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx */
-	/* SHADD8		cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx */
-	/* SHSUB8		cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx */
-	/* UADD16		cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx */
-	/* UADDSUBX		cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx */
-	/* USUBADDX		cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx */
-	/* USUB16		cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx */
-	/* UADD8		cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx */
-	/* USUB8		cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx */
-	/* UQADD16		cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx */
-	/* UQADDSUBX		cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx */
-	/* UQSUBADDX		cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx */
-	/* UQSUB16		cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx */
-	/* UQADD8		cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx */
-	/* UQSUB8		cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx */
-	/* UHADD16		cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx */
-	/* UHADDSUBX		cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx */
-	/* UHSUBADDX		cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx */
-	/* UHSUB16		cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx */
-	/* UHADD8		cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx */
-	/* UHSUB8		cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_EMULATEX	(0x0f800010, 0x06000010, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-
-	/* PKHBT		cccc 0110 1000 xxxx xxxx xxxx x001 xxxx */
-	/* PKHTB		cccc 0110 1000 xxxx xxxx xxxx x101 xxxx */
-	DECODE_EMULATEX	(0x0ff00030, 0x06800010, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-
-	/* ???			cccc 0110 1001 xxxx xxxx xxxx 0111 xxxx */
-	/* ???			cccc 0110 1101 xxxx xxxx xxxx 0111 xxxx */
-	DECODE_REJECT	(0x0fb000f0, 0x06900070),
-
-	/* SXTB16		cccc 0110 1000 1111 xxxx xxxx 0111 xxxx */
-	/* SXTB			cccc 0110 1010 1111 xxxx xxxx 0111 xxxx */
-	/* SXTH			cccc 0110 1011 1111 xxxx xxxx 0111 xxxx */
-	/* UXTB16		cccc 0110 1100 1111 xxxx xxxx 0111 xxxx */
-	/* UXTB			cccc 0110 1110 1111 xxxx xxxx 0111 xxxx */
-	/* UXTH			cccc 0110 1111 1111 xxxx xxxx 0111 xxxx */
-	DECODE_EMULATEX	(0x0f8f00f0, 0x068f0070, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, NOPC)),
-
-	/* SXTAB16		cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx */
-	/* SXTAB		cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx */
-	/* SXTAH		cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx */
-	/* UXTAB16		cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx */
-	/* UXTAB		cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx */
-	/* UXTAH		cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx */
-	DECODE_EMULATEX	(0x0f8000f0, 0x06800070, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(NOPCX, NOPC, 0, 0, NOPC)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_0111_____xxx1_table[] = {
-	/* Media instructions						*/
-
-	/* UNDEFINED		cccc 0111 1111 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_REJECT	(0x0ff000f0, 0x07f000f0),
-
-	/* SMLALD		cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */
-	/* SMLSLD		cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */
-	DECODE_EMULATEX	(0x0ff00090, 0x07400010, emulate_rdlo12rdhi16rn0rm8_rwflags_nopc,
-						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
-
-	/* SMUAD		cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx */
-	/* SMUSD		cccc 0111 0000 xxxx 1111 xxxx 01x1 xxxx */
-	DECODE_OR	(0x0ff0f090, 0x0700f010),
-	/* SMMUL		cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx */
-	DECODE_OR	(0x0ff0f0d0, 0x0750f010),
-	/* USAD8		cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */
-	DECODE_EMULATEX	(0x0ff0f0f0, 0x0780f010, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, 0, NOPC, 0, NOPC)),
-
-	/* SMLAD		cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx */
-	/* SMLSD		cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx */
-	DECODE_OR	(0x0ff00090, 0x07000010),
-	/* SMMLA		cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx */
-	DECODE_OR	(0x0ff000d0, 0x07500010),
-	/* USADA8		cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */
-	DECODE_EMULATEX	(0x0ff000f0, 0x07800010, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, NOPCX, NOPC, 0, NOPC)),
-
-	/* SMMLS		cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx */
-	DECODE_EMULATEX	(0x0ff000d0, 0x075000d0, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
-
-	/* SBFX			cccc 0111 101x xxxx xxxx xxxx x101 xxxx */
-	/* UBFX			cccc 0111 111x xxxx xxxx xxxx x101 xxxx */
-	DECODE_EMULATEX	(0x0fa00070, 0x07a00050, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, NOPC)),
-
-	/* BFC			cccc 0111 110x xxxx xxxx xxxx x001 1111 */
-	DECODE_EMULATEX	(0x0fe0007f, 0x07c0001f, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, 0)),
-
-	/* BFI			cccc 0111 110x xxxx xxxx xxxx x001 xxxx */
-	DECODE_EMULATEX	(0x0fe00070, 0x07c00010, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, NOPCX)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_01xx_table[] = {
-	/* Load/store word and unsigned byte				*/
-
-	/* LDRB/STRB pc,[...]	cccc 01xx x0xx xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0x0c40f000, 0x0440f000),
-
-	/* STRT			cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRT			cccc 01x0 x011 xxxx xxxx xxxx xxxx xxxx */
-	/* STRBT		cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRBT		cccc 01x0 x111 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0x0d200000, 0x04200000),
-
-	/* STR (immediate)	cccc 010x x0x0 xxxx xxxx xxxx xxxx xxxx */
-	/* STRB (immediate)	cccc 010x x1x0 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0e100000, 0x04000000, emulate_str,
-						 REGS(NOPCWB, ANY, 0, 0, 0)),
-
-	/* LDR (immediate)	cccc 010x x0x1 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRB (immediate)	cccc 010x x1x1 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0e100000, 0x04100000, emulate_ldr,
-						 REGS(NOPCWB, ANY, 0, 0, 0)),
-
-	/* STR (register)	cccc 011x x0x0 xxxx xxxx xxxx xxxx xxxx */
-	/* STRB (register)	cccc 011x x1x0 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0e100000, 0x06000000, emulate_str,
-						 REGS(NOPCWB, ANY, 0, 0, NOPC)),
-
-	/* LDR (register)	cccc 011x x0x1 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRB (register)	cccc 011x x1x1 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0e100000, 0x06100000, emulate_ldr,
-						 REGS(NOPCWB, ANY, 0, 0, NOPC)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_100x_table[] = {
-	/* Block data transfer instructions				*/
-
-	/* LDM			cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
-	/* STM			cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_CUSTOM	(0x0e400000, 0x08000000, kprobe_decode_ldmstm),
-
-	/* STM (user registers)	cccc 100x x1x0 xxxx xxxx xxxx xxxx xxxx */
-	/* LDM (user registers)	cccc 100x x1x1 xxxx 0xxx xxxx xxxx xxxx */
-	/* LDM (exception ret)	cccc 100x x1x1 xxxx 1xxx xxxx xxxx xxxx */
-	DECODE_END
-};
-
-const union decode_item kprobe_decode_arm_table[] = {
-	/*
-	 * Unconditional instructions
-	 *			1111 xxxx xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xf0000000, 0xf0000000, arm_1111_table),
-
-	/*
-	 * Miscellaneous instructions
-	 *			cccc 0001 0xx0 xxxx xxxx xxxx 0xxx xxxx
-	 */
-	DECODE_TABLE	(0x0f900080, 0x01000000, arm_cccc_0001_0xx0____0xxx_table),
-
-	/*
-	 * Halfword multiply and multiply-accumulate
-	 *			cccc 0001 0xx0 xxxx xxxx xxxx 1xx0 xxxx
-	 */
-	DECODE_TABLE	(0x0f900090, 0x01000080, arm_cccc_0001_0xx0____1xx0_table),
-
-	/*
-	 * Multiply and multiply-accumulate
-	 *			cccc 0000 xxxx xxxx xxxx xxxx 1001 xxxx
-	 */
-	DECODE_TABLE	(0x0f0000f0, 0x00000090, arm_cccc_0000_____1001_table),
-
-	/*
-	 * Synchronization primitives
-	 *			cccc 0001 xxxx xxxx xxxx xxxx 1001 xxxx
-	 */
-	DECODE_TABLE	(0x0f0000f0, 0x01000090, arm_cccc_0001_____1001_table),
-
-	/*
-	 * Extra load/store instructions
-	 *			cccc 000x xxxx xxxx xxxx xxxx 1xx1 xxxx
-	 */
-	DECODE_TABLE	(0x0e000090, 0x00000090, arm_cccc_000x_____1xx1_table),
-
-	/*
-	 * Data-processing (register)
-	 *			cccc 000x xxxx xxxx xxxx xxxx xxx0 xxxx
-	 * Data-processing (register-shifted register)
-	 *			cccc 000x xxxx xxxx xxxx xxxx 0xx1 xxxx
-	 */
-	DECODE_TABLE	(0x0e000000, 0x00000000, arm_cccc_000x_table),
-
-	/*
-	 * Data-processing (immediate)
-	 *			cccc 001x xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0x0e000000, 0x02000000, arm_cccc_001x_table),
-
-	/*
-	 * Media instructions
-	 *			cccc 011x xxxx xxxx xxxx xxxx xxx1 xxxx
-	 */
-	DECODE_TABLE	(0x0f000010, 0x06000010, arm_cccc_0110_____xxx1_table),
-	DECODE_TABLE	(0x0f000010, 0x07000010, arm_cccc_0111_____xxx1_table),
-
-	/*
-	 * Load/store word and unsigned byte
-	 *			cccc 01xx xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0x0c000000, 0x04000000, arm_cccc_01xx_table),
-
-	/*
-	 * Block data transfer instructions
-	 *			cccc 100x xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0x0e000000, 0x08000000, arm_cccc_100x_table),
-
-	/* B			cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */
-	/* BL			cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */
-	DECODE_SIMULATE	(0x0e000000, 0x0a000000, simulate_bbl),
-
-	/*
-	 * Supervisor Call, and coprocessor instructions
-	 */
-
-	/* MCRR			cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx */
-	/* MRRC			cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx */
-	/* LDC			cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
-	/* STC			cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
-	/* CDP			cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
-	/* MCR			cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
-	/* MRC			cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
-	/* SVC			cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0x0c000000, 0x0c000000),
-
-	DECODE_END
-};
-#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
-EXPORT_SYMBOL_GPL(kprobe_decode_arm_table);
-#endif
-
-static void __kprobes arm_singlestep(struct kprobe *p, struct pt_regs *regs)
-{
-	regs->ARM_pc += 4;
-	p->ainsn.insn_handler(p, regs);
-}
-
-/* Return:
- *   INSN_REJECTED     If instruction is one not allowed to kprobe,
- *   INSN_GOOD         If instruction is supported and uses instruction slot,
- *   INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
- *
- * For instructions we don't want to kprobe (INSN_REJECTED return result):
- *   These are generally ones that modify the processor state making
- *   them "hard" to simulate such as switches processor modes or
- *   make accesses in alternate modes.  Any of these could be simulated
- *   if the work was put into it, but low return considering they
- *   should also be very rare.
- */
-enum kprobe_insn __kprobes
-arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	asi->insn_singlestep = arm_singlestep;
-	asi->insn_check_cc = kprobe_condition_checks[insn>>28];
-	return kprobe_decode_insn(insn, asi, kprobe_decode_arm_table, false);
-}
diff --git a/arch/arm/kernel/kprobes-common.c b/arch/arm/kernel/kprobes-common.c
index 18a76282970e..0bf5d64eba1d 100644
--- a/arch/arm/kernel/kprobes-common.c
+++ b/arch/arm/kernel/kprobes-common.c
@@ -13,178 +13,15 @@
 
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
-#include <asm/system_info.h>
+#include <asm/opcodes.h>
 
 #include "kprobes.h"
 
 
-#ifndef find_str_pc_offset
-
-/*
- * For STR and STM instructions, an ARM core may choose to use either
- * a +8 or a +12 displacement from the current instruction's address.
- * Whichever value is chosen for a given core, it must be the same for
- * both instructions and may not change.  This function measures it.
- */
-
-int str_pc_offset;
-
-void __init find_str_pc_offset(void)
-{
-	int addr, scratch, ret;
-
-	__asm__ (
-		"sub	%[ret], pc, #4		\n\t"
-		"str	pc, %[addr]		\n\t"
-		"ldr	%[scr], %[addr]		\n\t"
-		"sub	%[ret], %[scr], %[ret]	\n\t"
-		: [ret] "=r" (ret), [scr] "=r" (scratch), [addr] "+m" (addr));
-
-	str_pc_offset = ret;
-}
-
-#endif /* !find_str_pc_offset */
-
-
-#ifndef test_load_write_pc_interworking
-
-bool load_write_pc_interworks;
-
-void __init test_load_write_pc_interworking(void)
-{
-	int arch = cpu_architecture();
-	BUG_ON(arch == CPU_ARCH_UNKNOWN);
-	load_write_pc_interworks = arch >= CPU_ARCH_ARMv5T;
-}
-
-#endif /* !test_load_write_pc_interworking */
-
-
-#ifndef test_alu_write_pc_interworking
-
-bool alu_write_pc_interworks;
-
-void __init test_alu_write_pc_interworking(void)
-{
-	int arch = cpu_architecture();
-	BUG_ON(arch == CPU_ARCH_UNKNOWN);
-	alu_write_pc_interworks = arch >= CPU_ARCH_ARMv7;
-}
-
-#endif /* !test_alu_write_pc_interworking */
-
-
-void __init arm_kprobe_decode_init(void)
-{
-	find_str_pc_offset();
-	test_load_write_pc_interworking();
-	test_alu_write_pc_interworking();
-}
-
-
-static unsigned long __kprobes __check_eq(unsigned long cpsr)
-{
-	return cpsr & PSR_Z_BIT;
-}
-
-static unsigned long __kprobes __check_ne(unsigned long cpsr)
-{
-	return (~cpsr) & PSR_Z_BIT;
-}
-
-static unsigned long __kprobes __check_cs(unsigned long cpsr)
-{
-	return cpsr & PSR_C_BIT;
-}
-
-static unsigned long __kprobes __check_cc(unsigned long cpsr)
-{
-	return (~cpsr) & PSR_C_BIT;
-}
-
-static unsigned long __kprobes __check_mi(unsigned long cpsr)
-{
-	return cpsr & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_pl(unsigned long cpsr)
-{
-	return (~cpsr) & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_vs(unsigned long cpsr)
-{
-	return cpsr & PSR_V_BIT;
-}
-
-static unsigned long __kprobes __check_vc(unsigned long cpsr)
-{
-	return (~cpsr) & PSR_V_BIT;
-}
-
-static unsigned long __kprobes __check_hi(unsigned long cpsr)
-{
-	cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
-	return cpsr & PSR_C_BIT;
-}
-
-static unsigned long __kprobes __check_ls(unsigned long cpsr)
-{
-	cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
-	return (~cpsr) & PSR_C_BIT;
-}
-
-static unsigned long __kprobes __check_ge(unsigned long cpsr)
-{
-	cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-	return (~cpsr) & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_lt(unsigned long cpsr)
-{
-	cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-	return cpsr & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_gt(unsigned long cpsr)
-{
-	unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-	temp |= (cpsr << 1);			 /* PSR_N_BIT |= PSR_Z_BIT */
-	return (~temp) & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_le(unsigned long cpsr)
-{
-	unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-	temp |= (cpsr << 1);			 /* PSR_N_BIT |= PSR_Z_BIT */
-	return temp & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_al(unsigned long cpsr)
-{
-	return true;
-}
-
-kprobe_check_cc * const kprobe_condition_checks[16] = {
-	&__check_eq, &__check_ne, &__check_cs, &__check_cc,
-	&__check_mi, &__check_pl, &__check_vs, &__check_vc,
-	&__check_hi, &__check_ls, &__check_ge, &__check_lt,
-	&__check_gt, &__check_le, &__check_al, &__check_al
-};
-
-
-void __kprobes kprobe_simulate_nop(struct kprobe *p, struct pt_regs *regs)
-{
-}
-
-void __kprobes kprobe_emulate_none(struct kprobe *p, struct pt_regs *regs)
-{
-	p->ainsn.insn_fn();
-}
-
-static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes simulate_ldm1stm1(probes_opcode_t insn,
+		struct arch_probes_insn *asi,
+		struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	int rn = (insn >> 16) & 0xf;
 	int lbit = insn & (1 << 20);
 	int wbit = insn & (1 << 21);
@@ -223,24 +60,31 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
 	}
 }
 
-static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes simulate_stm1_pc(probes_opcode_t insn,
+	struct arch_probes_insn *asi,
+	struct pt_regs *regs)
 {
-	regs->ARM_pc = (long)p->addr + str_pc_offset;
-	simulate_ldm1stm1(p, regs);
-	regs->ARM_pc = (long)p->addr + 4;
+	unsigned long addr = regs->ARM_pc - 4;
+
+	regs->ARM_pc = (long)addr + str_pc_offset;
+	simulate_ldm1stm1(insn, asi, regs);
+	regs->ARM_pc = (long)addr + 4;
 }
 
-static void __kprobes simulate_ldm1_pc(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes simulate_ldm1_pc(probes_opcode_t insn,
+	struct arch_probes_insn *asi,
+	struct pt_regs *regs)
 {
-	simulate_ldm1stm1(p, regs);
+	simulate_ldm1stm1(insn, asi, regs);
 	load_write_pc(regs->ARM_pc, regs);
 }
 
 static void __kprobes
-emulate_generic_r0_12_noflags(struct kprobe *p, struct pt_regs *regs)
+emulate_generic_r0_12_noflags(probes_opcode_t insn,
+	struct arch_probes_insn *asi, struct pt_regs *regs)
 {
 	register void *rregs asm("r1") = regs;
-	register void *rfn asm("lr") = p->ainsn.insn_fn;
+	register void *rfn asm("lr") = asi->insn_fn;
 
 	__asm__ __volatile__ (
 		"stmdb	sp!, {%[regs], r11}	\n\t"
@@ -264,22 +108,27 @@ emulate_generic_r0_12_noflags(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-emulate_generic_r2_14_noflags(struct kprobe *p, struct pt_regs *regs)
+emulate_generic_r2_14_noflags(probes_opcode_t insn,
+	struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	emulate_generic_r0_12_noflags(p, (struct pt_regs *)(regs->uregs+2));
+	emulate_generic_r0_12_noflags(insn, asi,
+		(struct pt_regs *)(regs->uregs+2));
 }
 
 static void __kprobes
-emulate_ldm_r3_15(struct kprobe *p, struct pt_regs *regs)
+emulate_ldm_r3_15(probes_opcode_t insn,
+	struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	emulate_generic_r0_12_noflags(p, (struct pt_regs *)(regs->uregs+3));
+	emulate_generic_r0_12_noflags(insn, asi,
+		(struct pt_regs *)(regs->uregs+3));
 	load_write_pc(regs->ARM_pc, regs);
 }
 
-enum kprobe_insn __kprobes
-kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+enum probes_insn __kprobes
+kprobe_decode_ldmstm(probes_opcode_t insn, struct arch_probes_insn *asi,
+		const struct decode_header *h)
 {
-	kprobe_insn_handler_t *handler = 0;
+	probes_insn_handler_t *handler = 0;
 	unsigned reglist = insn & 0xffff;
 	int is_ldm = insn & 0x100000;
 	int rn = (insn >> 16) & 0xf;
@@ -305,7 +154,8 @@ kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 
 	if (handler) {
 		/* We can emulate the instruction in (possibly) modified form */
-		asi->insn[0] = (insn & 0xfff00000) | (rn << 16) | reglist;
+		asi->insn[0] = __opcode_to_mem_arm((insn & 0xfff00000) |
+						   (rn << 16) | reglist);
 		asi->insn_handler = handler;
 		return INSN_GOOD;
 	}
@@ -319,260 +169,3 @@ kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 	return INSN_GOOD_NO_SLOT;
 }
 
-
-/*
- * Prepare an instruction slot to receive an instruction for emulating.
- * This is done by placing a subroutine return after the location where the
- * instruction will be placed. We also modify ARM instructions to be
- * unconditional as the condition code will already be checked before any
- * emulation handler is called.
- */
-static kprobe_opcode_t __kprobes
-prepare_emulated_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
-								bool thumb)
-{
-#ifdef CONFIG_THUMB2_KERNEL
-	if (thumb) {
-		u16 *thumb_insn = (u16 *)asi->insn;
-		thumb_insn[1] = 0x4770; /* Thumb bx lr */
-		thumb_insn[2] = 0x4770; /* Thumb bx lr */
-		return insn;
-	}
-	asi->insn[1] = 0xe12fff1e; /* ARM bx lr */
-#else
-	asi->insn[1] = 0xe1a0f00e; /* mov pc, lr */
-#endif
-	/* Make an ARM instruction unconditional */
-	if (insn < 0xe0000000)
-		insn = (insn | 0xe0000000) & ~0x10000000;
-	return insn;
-}
-
-/*
- * Write a (probably modified) instruction into the slot previously prepared by
- * prepare_emulated_insn
- */
-static void  __kprobes
-set_emulated_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
-								bool thumb)
-{
-#ifdef CONFIG_THUMB2_KERNEL
-	if (thumb) {
-		u16 *ip = (u16 *)asi->insn;
-		if (is_wide_instruction(insn))
-			*ip++ = insn >> 16;
-		*ip++ = insn;
-		return;
-	}
-#endif
-	asi->insn[0] = insn;
-}
-
-/*
- * When we modify the register numbers encoded in an instruction to be emulated,
- * the new values come from this define. For ARM and 32-bit Thumb instructions
- * this gives...
- *
- *	bit position	  16  12   8   4   0
- *	---------------+---+---+---+---+---+
- *	register	 r2  r0  r1  --  r3
- */
-#define INSN_NEW_BITS		0x00020103
-
-/* Each nibble has same value as that at INSN_NEW_BITS bit 16 */
-#define INSN_SAMEAS16_BITS	0x22222222
-
-/*
- * Validate and modify each of the registers encoded in an instruction.
- *
- * Each nibble in regs contains a value from enum decode_reg_type. For each
- * non-zero value, the corresponding nibble in pinsn is validated and modified
- * according to the type.
- */
-static bool __kprobes decode_regs(kprobe_opcode_t* pinsn, u32 regs)
-{
-	kprobe_opcode_t insn = *pinsn;
-	kprobe_opcode_t mask = 0xf; /* Start at least significant nibble */
-
-	for (; regs != 0; regs >>= 4, mask <<= 4) {
-
-		kprobe_opcode_t new_bits = INSN_NEW_BITS;
-
-		switch (regs & 0xf) {
-
-		case REG_TYPE_NONE:
-			/* Nibble not a register, skip to next */
-			continue;
-
-		case REG_TYPE_ANY:
-			/* Any register is allowed */
-			break;
-
-		case REG_TYPE_SAMEAS16:
-			/* Replace register with same as at bit position 16 */
-			new_bits = INSN_SAMEAS16_BITS;
-			break;
-
-		case REG_TYPE_SP:
-			/* Only allow SP (R13) */
-			if ((insn ^ 0xdddddddd) & mask)
-				goto reject;
-			break;
-
-		case REG_TYPE_PC:
-			/* Only allow PC (R15) */
-			if ((insn ^ 0xffffffff) & mask)
-				goto reject;
-			break;
-
-		case REG_TYPE_NOSP:
-			/* Reject SP (R13) */
-			if (((insn ^ 0xdddddddd) & mask) == 0)
-				goto reject;
-			break;
-
-		case REG_TYPE_NOSPPC:
-		case REG_TYPE_NOSPPCX:
-			/* Reject SP and PC (R13 and R15) */
-			if (((insn ^ 0xdddddddd) & 0xdddddddd & mask) == 0)
-				goto reject;
-			break;
-
-		case REG_TYPE_NOPCWB:
-			if (!is_writeback(insn))
-				break; /* No writeback, so any register is OK */
-			/* fall through... */
-		case REG_TYPE_NOPC:
-		case REG_TYPE_NOPCX:
-			/* Reject PC (R15) */
-			if (((insn ^ 0xffffffff) & mask) == 0)
-				goto reject;
-			break;
-		}
-
-		/* Replace value of nibble with new register number... */
-		insn &= ~mask;
-		insn |= new_bits & mask;
-	}
-
-	*pinsn = insn;
-	return true;
-
-reject:
-	return false;
-}
-
-static const int decode_struct_sizes[NUM_DECODE_TYPES] = {
-	[DECODE_TYPE_TABLE]	= sizeof(struct decode_table),
-	[DECODE_TYPE_CUSTOM]	= sizeof(struct decode_custom),
-	[DECODE_TYPE_SIMULATE]	= sizeof(struct decode_simulate),
-	[DECODE_TYPE_EMULATE]	= sizeof(struct decode_emulate),
-	[DECODE_TYPE_OR]	= sizeof(struct decode_or),
-	[DECODE_TYPE_REJECT]	= sizeof(struct decode_reject)
-};
-
-/*
- * kprobe_decode_insn operates on data tables in order to decode an ARM
- * architecture instruction onto which a kprobe has been placed.
- *
- * These instruction decoding tables are a concatenation of entries each
- * of which consist of one of the following structs:
- *
- *	decode_table
- *	decode_custom
- *	decode_simulate
- *	decode_emulate
- *	decode_or
- *	decode_reject
- *
- * Each of these starts with a struct decode_header which has the following
- * fields:
- *
- *	type_regs
- *	mask
- *	value
- *
- * The least significant DECODE_TYPE_BITS of type_regs contains a value
- * from enum decode_type, this indicates which of the decode_* structs
- * the entry contains. The value DECODE_TYPE_END indicates the end of the
- * table.
- *
- * When the table is parsed, each entry is checked in turn to see if it
- * matches the instruction to be decoded using the test:
- *
- *	(insn & mask) == value
- *
- * If no match is found before the end of the table is reached then decoding
- * fails with INSN_REJECTED.
- *
- * When a match is found, decode_regs() is called to validate and modify each
- * of the registers encoded in the instruction; the data it uses to do this
- * is (type_regs >> DECODE_TYPE_BITS). A validation failure will cause decoding
- * to fail with INSN_REJECTED.
- *
- * Once the instruction has passed the above tests, further processing
- * depends on the type of the table entry's decode struct.
- *
- */
-int __kprobes
-kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
-				const union decode_item *table, bool thumb)
-{
-	const struct decode_header *h = (struct decode_header *)table;
-	const struct decode_header *next;
-	bool matched = false;
-
-	insn = prepare_emulated_insn(insn, asi, thumb);
-
-	for (;; h = next) {
-		enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
-		u32 regs = h->type_regs.bits >> DECODE_TYPE_BITS;
-
-		if (type == DECODE_TYPE_END)
-			return INSN_REJECTED;
-
-		next = (struct decode_header *)
-				((uintptr_t)h + decode_struct_sizes[type]);
-
-		if (!matched && (insn & h->mask.bits) != h->value.bits)
-			continue;
-
-		if (!decode_regs(&insn, regs))
-			return INSN_REJECTED;
-
-		switch (type) {
-
-		case DECODE_TYPE_TABLE: {
-			struct decode_table *d = (struct decode_table *)h;
-			next = (struct decode_header *)d->table.table;
-			break;
-		}
-
-		case DECODE_TYPE_CUSTOM: {
-			struct decode_custom *d = (struct decode_custom *)h;
-			return (*d->decoder.decoder)(insn, asi);
-		}
-
-		case DECODE_TYPE_SIMULATE: {
-			struct decode_simulate *d = (struct decode_simulate *)h;
-			asi->insn_handler = d->handler.handler;
-			return INSN_GOOD_NO_SLOT;
-		}
-
-		case DECODE_TYPE_EMULATE: {
-			struct decode_emulate *d = (struct decode_emulate *)h;
-			asi->insn_handler = d->handler.handler;
-			set_emulated_insn(insn, asi, thumb);
-			return INSN_GOOD;
-		}
-
-		case DECODE_TYPE_OR:
-			matched = true;
-			break;
-
-		case DECODE_TYPE_REJECT:
-		default:
-			return INSN_REJECTED;
-		}
-		}
-	}
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index 839312905067..9db4b659d03e 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -10,6 +10,8 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <asm/system_info.h>
+#include <asm/opcodes.h>
 
 #include "kprobes-test.h"
 
@@ -158,9 +160,9 @@ void kprobe_arm_test_cases(void)
 	TEST_SUPPORTED("cmp	sp, #0x1000");
 
 	/* Data-processing with PC as shift*/
-	TEST_UNSUPPORTED(".word 0xe15c0f1e	@ cmp	r12, r14, asl pc")
-	TEST_UNSUPPORTED(".word 0xe1a0cf1e	@ mov	r12, r14, asl pc")
-	TEST_UNSUPPORTED(".word 0xe08caf1e	@ add	r10, r12, r14, asl pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe15c0f1e) "	@ cmp	r12, r14, asl pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe1a0cf1e) "	@ mov	r12, r14, asl pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe08caf1e) "	@ add	r10, r12, r14, asl pc")
 
 	/* Data-processing with PC as shift*/
 	TEST_UNSUPPORTED("movs	pc, r1")
@@ -202,7 +204,7 @@ void kprobe_arm_test_cases(void)
 	TEST("mrs	r0, cpsr")
 	TEST("mrspl	r7, cpsr")
 	TEST("mrs	r14, cpsr")
-	TEST_UNSUPPORTED(".word 0xe10ff000	@ mrs r15, cpsr")
+	TEST_UNSUPPORTED(__inst_arm(0xe10ff000) "	@ mrs r15, cpsr")
 	TEST_UNSUPPORTED("mrs	r0, spsr")
 	TEST_UNSUPPORTED("mrs	lr, spsr")
 
@@ -218,8 +220,8 @@ void kprobe_arm_test_cases(void)
 	TEST_R("clzeq	r7, r",14,0x1,"")
 	TEST_R("clz	lr, r",7, 0xffffffff,"")
 	TEST(  "clz	r4, sp")
-	TEST_UNSUPPORTED(".word 0x016fff10	@ clz pc, r0")
-	TEST_UNSUPPORTED(".word 0x016f0f1f	@ clz r0, pc")
+	TEST_UNSUPPORTED(__inst_arm(0x016fff10) "	@ clz pc, r0")
+	TEST_UNSUPPORTED(__inst_arm(0x016f0f1f) "	@ clz r0, pc")
 
 #if __LINUX_ARM_ARCH__ >= 6
 	TEST_UNSUPPORTED("bxj	r0")
@@ -228,7 +230,7 @@ void kprobe_arm_test_cases(void)
 	TEST_BF_R("blx	r",0,2f,"")
 	TEST_BB_R("blx	r",7,2f,"")
 	TEST_BF_R("blxeq	r",14,2f,"")
-	TEST_UNSUPPORTED(".word 0x0120003f	@ blx pc")
+	TEST_UNSUPPORTED(__inst_arm(0x0120003f) "	@ blx pc")
 
 	TEST_RR(   "qadd	r0, r",1, VAL1,", r",2, VAL2,"")
 	TEST_RR(   "qaddvs	lr, r",9, VAL2,", r",8, VAL1,"")
@@ -242,190 +244,190 @@ void kprobe_arm_test_cases(void)
 	TEST_RR(   "qdsub	r0, r",1, VAL1,", r",2, VAL2,"")
 	TEST_RR(   "qdsubvs	lr, r",9, VAL2,", r",8, VAL1,"")
 	TEST_R(    "qdsub	lr, r",9, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe101f050	@ qadd pc, r0, r1")
-	TEST_UNSUPPORTED(".word 0xe121f050	@ qsub pc, r0, r1")
-	TEST_UNSUPPORTED(".word 0xe141f050	@ qdadd pc, r0, r1")
-	TEST_UNSUPPORTED(".word 0xe161f050	@ qdsub pc, r0, r1")
-	TEST_UNSUPPORTED(".word 0xe16f2050	@ qdsub r2, r0, pc")
-	TEST_UNSUPPORTED(".word 0xe161205f	@ qdsub r2, pc, r1")
+	TEST_UNSUPPORTED(__inst_arm(0xe101f050) "	@ qadd pc, r0, r1")
+	TEST_UNSUPPORTED(__inst_arm(0xe121f050) "	@ qsub pc, r0, r1")
+	TEST_UNSUPPORTED(__inst_arm(0xe141f050) "	@ qdadd pc, r0, r1")
+	TEST_UNSUPPORTED(__inst_arm(0xe161f050) "	@ qdsub pc, r0, r1")
+	TEST_UNSUPPORTED(__inst_arm(0xe16f2050) "	@ qdsub r2, r0, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe161205f) "	@ qdsub r2, pc, r1")
 
 	TEST_UNSUPPORTED("bkpt	0xffff")
 	TEST_UNSUPPORTED("bkpt	0x0000")
 
-	TEST_UNSUPPORTED(".word 0xe1600070 @ smc #0")
+	TEST_UNSUPPORTED(__inst_arm(0xe1600070) " @ smc #0")
 
 	TEST_GROUP("Halfword multiply and multiply-accumulate")
 
 	TEST_RRR(    "smlabb	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(    "smlabbge	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
 	TEST_RR(     "smlabb	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe10f3281 @ smlabb pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe10f3281) " @ smlabb pc, r1, r2, r3")
 	TEST_RRR(    "smlatb	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(    "smlatbge	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
 	TEST_RR(     "smlatb	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe10f32a1 @ smlatb pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe10f32a1) " @ smlatb pc, r1, r2, r3")
 	TEST_RRR(    "smlabt	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(    "smlabtge	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
 	TEST_RR(     "smlabt	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe10f32c1 @ smlabt pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe10f32c1) " @ smlabt pc, r1, r2, r3")
 	TEST_RRR(    "smlatt	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(    "smlattge	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
 	TEST_RR(     "smlatt	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe10f32e1 @ smlatt pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe10f32e1) " @ smlatt pc, r1, r2, r3")
 
 	TEST_RRR(    "smlawb	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(    "smlawbge	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
 	TEST_RR(     "smlawb	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe12f3281 @ smlawb pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe12f3281) " @ smlawb pc, r1, r2, r3")
 	TEST_RRR(    "smlawt	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(    "smlawtge	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
 	TEST_RR(     "smlawt	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe12f32c1 @ smlawt pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe12032cf @ smlawt r0, pc, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe1203fc1 @ smlawt r0, r1, pc, r3")
-	TEST_UNSUPPORTED(".word 0xe120f2c1 @ smlawt r0, r1, r2, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe12f32c1) " @ smlawt pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe12032cf) " @ smlawt r0, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe1203fc1) " @ smlawt r0, r1, pc, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe120f2c1) " @ smlawt r0, r1, r2, pc")
 
 	TEST_RR(    "smulwb	r0, r",1, VAL1,", r",2, VAL2,"")
 	TEST_RR(    "smulwbge	r7, r",8, VAL3,", r",9, VAL1,"")
 	TEST_R(     "smulwb	lr, r",1, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe12f02a1 @ smulwb pc, r1, r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe12f02a1) " @ smulwb pc, r1, r2")
 	TEST_RR(    "smulwt	r0, r",1, VAL1,", r",2, VAL2,"")
 	TEST_RR(    "smulwtge	r7, r",8, VAL3,", r",9, VAL1,"")
 	TEST_R(     "smulwt	lr, r",1, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe12f02e1 @ smulwt pc, r1, r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe12f02e1) " @ smulwt pc, r1, r2")
 
 	TEST_RRRR(  "smlalbb	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
 	TEST_RRRR(  "smlalbble	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
 	TEST_RRR(   "smlalbb	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe14f1382 @ smlalbb pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe141f382 @ smlalbb r1, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe14f1382) " @ smlalbb pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe141f382) " @ smlalbb r1, pc, r2, r3")
 	TEST_RRRR(  "smlaltb	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
 	TEST_RRRR(  "smlaltble	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
 	TEST_RRR(   "smlaltb	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe14f13a2 @ smlaltb pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe141f3a2 @ smlaltb r1, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe14f13a2) " @ smlaltb pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe141f3a2) " @ smlaltb r1, pc, r2, r3")
 	TEST_RRRR(  "smlalbt	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
 	TEST_RRRR(  "smlalbtle	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
 	TEST_RRR(   "smlalbt	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe14f13c2 @ smlalbt pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe141f3c2 @ smlalbt r1, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe14f13c2) " @ smlalbt pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe141f3c2) " @ smlalbt r1, pc, r2, r3")
 	TEST_RRRR(  "smlaltt	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
 	TEST_RRRR(  "smlalttle	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
 	TEST_RRR(   "smlaltt	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe14f13e2 @ smlalbb pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe140f3e2 @ smlalbb r0, pc, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe14013ef @ smlalbb r0, r1, pc, r3")
-	TEST_UNSUPPORTED(".word 0xe1401fe2 @ smlalbb r0, r1, r2, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe14f13e2) " @ smlalbb pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe140f3e2) " @ smlalbb r0, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe14013ef) " @ smlalbb r0, r1, pc, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe1401fe2) " @ smlalbb r0, r1, r2, pc")
 
 	TEST_RR(    "smulbb	r0, r",1, VAL1,", r",2, VAL2,"")
 	TEST_RR(    "smulbbge	r7, r",8, VAL3,", r",9, VAL1,"")
 	TEST_R(     "smulbb	lr, r",1, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe16f0281 @ smulbb pc, r1, r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe16f0281) " @ smulbb pc, r1, r2")
 	TEST_RR(    "smultb	r0, r",1, VAL1,", r",2, VAL2,"")
 	TEST_RR(    "smultbge	r7, r",8, VAL3,", r",9, VAL1,"")
 	TEST_R(     "smultb	lr, r",1, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe16f02a1 @ smultb pc, r1, r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe16f02a1) " @ smultb pc, r1, r2")
 	TEST_RR(    "smulbt	r0, r",1, VAL1,", r",2, VAL2,"")
 	TEST_RR(    "smulbtge	r7, r",8, VAL3,", r",9, VAL1,"")
 	TEST_R(     "smulbt	lr, r",1, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe16f02c1 @ smultb pc, r1, r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe16f02c1) " @ smultb pc, r1, r2")
 	TEST_RR(    "smultt	r0, r",1, VAL1,", r",2, VAL2,"")
 	TEST_RR(    "smulttge	r7, r",8, VAL3,", r",9, VAL1,"")
 	TEST_R(     "smultt	lr, r",1, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe16f02e1 @ smultt pc, r1, r2")
-	TEST_UNSUPPORTED(".word 0xe16002ef @ smultt r0, pc, r2")
-	TEST_UNSUPPORTED(".word 0xe1600fe1 @ smultt r0, r1, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe16f02e1) " @ smultt pc, r1, r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe16002ef) " @ smultt r0, pc, r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe1600fe1) " @ smultt r0, r1, pc")
 
 	TEST_GROUP("Multiply and multiply-accumulate")
 
 	TEST_RR(    "mul	r0, r",1, VAL1,", r",2, VAL2,"")
 	TEST_RR(    "mulls	r7, r",8, VAL2,", r",9, VAL2,"")
 	TEST_R(     "mul	lr, r",4, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe00f0291 @ mul pc, r1, r2")
-	TEST_UNSUPPORTED(".word 0xe000029f @ mul r0, pc, r2")
-	TEST_UNSUPPORTED(".word 0xe0000f91 @ mul r0, r1, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe00f0291) " @ mul pc, r1, r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe000029f) " @ mul r0, pc, r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe0000f91) " @ mul r0, r1, pc")
 	TEST_RR(    "muls	r0, r",1, VAL1,", r",2, VAL2,"")
 	TEST_RR(    "mullss	r7, r",8, VAL2,", r",9, VAL2,"")
 	TEST_R(     "muls	lr, r",4, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe01f0291 @ muls pc, r1, r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe01f0291) " @ muls pc, r1, r2")
 
 	TEST_RRR(    "mla	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(    "mlahi	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
 	TEST_RR(     "mla	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe02f3291 @ mla pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe02f3291) " @ mla pc, r1, r2, r3")
 	TEST_RRR(    "mlas	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(    "mlahis	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
 	TEST_RR(     "mlas	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe03f3291 @ mlas pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe03f3291) " @ mlas pc, r1, r2, r3")
 
 #if __LINUX_ARM_ARCH__ >= 6
 	TEST_RR(  "umaal	r0, r1, r",2, VAL1,", r",3, VAL2,"")
 	TEST_RR(  "umaalls	r7, r8, r",9, VAL2,", r",10, VAL1,"")
 	TEST_R(   "umaal	lr, r12, r",11,VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe041f392 @ umaal pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
-	TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
+	TEST_UNSUPPORTED(__inst_arm(0xe041f392) " @ umaal pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe04f0392) " @ umaal r0, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0500090) " @ undef")
+	TEST_UNSUPPORTED(__inst_arm(0xe05fff9f) " @ undef")
 #endif
 
 #if __LINUX_ARM_ARCH__ >= 7
 	TEST_RRR(  "mls		r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(  "mlshi	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
 	TEST_RR(   "mls		lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe06f3291 @ mls pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe060329f @ mls r0, pc, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0603f91 @ mls r0, r1, pc, r3")
-	TEST_UNSUPPORTED(".word 0xe060f291 @ mls r0, r1, r2, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe06f3291) " @ mls pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe060329f) " @ mls r0, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0603f91) " @ mls r0, r1, pc, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe060f291) " @ mls r0, r1, r2, pc")
 #endif
 
-	TEST_UNSUPPORTED(".word 0xe0700090 @ undef")
-	TEST_UNSUPPORTED(".word 0xe07fff9f @ undef")
+	TEST_UNSUPPORTED(__inst_arm(0xe0700090) " @ undef")
+	TEST_UNSUPPORTED(__inst_arm(0xe07fff9f) " @ undef")
 
 	TEST_RR(  "umull	r0, r1, r",2, VAL1,", r",3, VAL2,"")
 	TEST_RR(  "umullls	r7, r8, r",9, VAL2,", r",10, VAL1,"")
 	TEST_R(   "umull	lr, r12, r",11,VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe081f392 @ umull pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe08f1392 @ umull r1, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe081f392) " @ umull pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe08f1392) " @ umull r1, pc, r2, r3")
 	TEST_RR(  "umulls	r0, r1, r",2, VAL1,", r",3, VAL2,"")
 	TEST_RR(  "umulllss	r7, r8, r",9, VAL2,", r",10, VAL1,"")
 	TEST_R(   "umulls	lr, r12, r",11,VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe091f392 @ umulls pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe09f1392 @ umulls r1, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe091f392) " @ umulls pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe09f1392) " @ umulls r1, pc, r2, r3")
 
 	TEST_RRRR(  "umlal	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
 	TEST_RRRR(  "umlalle	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
 	TEST_RRR(   "umlal	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe0af1392 @ umlal pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0a1f392 @ umlal r1, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0af1392) " @ umlal pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0a1f392) " @ umlal r1, pc, r2, r3")
 	TEST_RRRR(  "umlals	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
 	TEST_RRRR(  "umlalles	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
 	TEST_RRR(   "umlals	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe0bf1392 @ umlals pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0b1f392 @ umlals r1, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0bf1392) " @ umlals pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0b1f392) " @ umlals r1, pc, r2, r3")
 
 	TEST_RR(  "smull	r0, r1, r",2, VAL1,", r",3, VAL2,"")
 	TEST_RR(  "smullls	r7, r8, r",9, VAL2,", r",10, VAL1,"")
 	TEST_R(   "smull	lr, r12, r",11,VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe0c1f392 @ smull pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0cf1392 @ smull r1, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0c1f392) " @ smull pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0cf1392) " @ smull r1, pc, r2, r3")
 	TEST_RR(  "smulls	r0, r1, r",2, VAL1,", r",3, VAL2,"")
 	TEST_RR(  "smulllss	r7, r8, r",9, VAL2,", r",10, VAL1,"")
 	TEST_R(   "smulls	lr, r12, r",11,VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe0d1f392 @ smulls pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0df1392 @ smulls r1, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0d1f392) " @ smulls pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0df1392) " @ smulls r1, pc, r2, r3")
 
 	TEST_RRRR(  "smlal	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
 	TEST_RRRR(  "smlalle	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
 	TEST_RRR(   "smlal	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe0ef1392 @ smlal pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0e1f392 @ smlal r1, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0ef1392) " @ smlal pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0e1f392) " @ smlal r1, pc, r2, r3")
 	TEST_RRRR(  "smlals	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
 	TEST_RRRR(  "smlalles	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
 	TEST_RRR(   "smlals	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe0ff1392 @ smlals pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0f0f392 @ smlals r0, pc, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0f0139f @ smlals r0, r1, pc, r3")
-	TEST_UNSUPPORTED(".word 0xe0f01f92 @ smlals r0, r1, r2, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe0ff1392) " @ smlals pc, r1, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0f0f392) " @ smlals r0, pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0f0139f) " @ smlals r0, r1, pc, r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe0f01f92) " @ smlals r0, r1, r2, pc")
 
 	TEST_GROUP("Synchronization primitives")
 
@@ -434,28 +436,28 @@ void kprobe_arm_test_cases(void)
 	TEST_R( "swpvs	r0, r",1,VAL1,", [sp]")
 	TEST_RP("swp	sp, r",14,VAL2,", [r",12,13*4,"]")
 #else
-	TEST_UNSUPPORTED(".word 0xe108e097 @ swp	lr, r7, [r8]")
-	TEST_UNSUPPORTED(".word 0x610d0091 @ swpvs	r0, r1, [sp]")
-	TEST_UNSUPPORTED(".word 0xe10cd09e @ swp	sp, r14 [r12]")
+	TEST_UNSUPPORTED(__inst_arm(0xe108e097) " @ swp	lr, r7, [r8]")
+	TEST_UNSUPPORTED(__inst_arm(0x610d0091) " @ swpvs	r0, r1, [sp]")
+	TEST_UNSUPPORTED(__inst_arm(0xe10cd09e) " @ swp	sp, r14 [r12]")
 #endif
-	TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
-	TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
-	TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
+	TEST_UNSUPPORTED(__inst_arm(0xe102f091) " @ swp pc, r1, [r2]")
+	TEST_UNSUPPORTED(__inst_arm(0xe102009f) " @ swp r0, pc, [r2]")
+	TEST_UNSUPPORTED(__inst_arm(0xe10f0091) " @ swp r0, r1, [pc]")
 #if __LINUX_ARM_ARCH__ < 6
 	TEST_RP("swpb	lr, r",7,VAL2,", [r",8,0,"]")
 	TEST_R( "swpvsb	r0, r",1,VAL1,", [sp]")
 #else
-	TEST_UNSUPPORTED(".word 0xe148e097 @ swpb	lr, r7, [r8]")
-	TEST_UNSUPPORTED(".word 0x614d0091 @ swpvsb	r0, r1, [sp]")
+	TEST_UNSUPPORTED(__inst_arm(0xe148e097) " @ swpb	lr, r7, [r8]")
+	TEST_UNSUPPORTED(__inst_arm(0x614d0091) " @ swpvsb	r0, r1, [sp]")
 #endif
-	TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
-
-	TEST_UNSUPPORTED(".word	0xe1100090") /* Unallocated space */
-	TEST_UNSUPPORTED(".word	0xe1200090") /* Unallocated space */
-	TEST_UNSUPPORTED(".word	0xe1300090") /* Unallocated space */
-	TEST_UNSUPPORTED(".word	0xe1500090") /* Unallocated space */
-	TEST_UNSUPPORTED(".word	0xe1600090") /* Unallocated space */
-	TEST_UNSUPPORTED(".word	0xe1700090") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe142f091) " @ swpb pc, r1, [r2]")
+
+	TEST_UNSUPPORTED(__inst_arm(0xe1100090)) /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe1200090)) /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe1300090)) /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe1500090)) /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe1600090)) /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe1700090)) /* Unallocated space */
 #if __LINUX_ARM_ARCH__ >= 6
 	TEST_UNSUPPORTED("ldrex	r2, [sp]")
 #endif
@@ -475,9 +477,9 @@ void kprobe_arm_test_cases(void)
 	TEST_RPR(  "strneh	r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
 	TEST_RPR(  "strh	r",2, VAL1,", [r",3, 24,"], r",4, 48,"")
 	TEST_RPR(  "strh	r",10,VAL2,", [r",9, 48,"], -r",11,24,"")
-	TEST_UNSUPPORTED(".word 0xe1afc0ba	@ strh r12, [pc, r10]!")
-	TEST_UNSUPPORTED(".word 0xe089f0bb	@ strh pc, [r9], r11")
-	TEST_UNSUPPORTED(".word 0xe089a0bf	@ strh r10, [r9], pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe1afc0ba) "	@ strh r12, [pc, r10]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe089f0bb) "	@ strh pc, [r9], r11")
+	TEST_UNSUPPORTED(__inst_arm(0xe089a0bf) "	@ strh r10, [r9], pc")
 
 	TEST_PR(   "ldrh	r0, [r",0,  48,", -r",2, 24,"]")
 	TEST_PR(   "ldrcsh	r14, [r",13,0, ", r",12, 48,"]")
@@ -485,9 +487,9 @@ void kprobe_arm_test_cases(void)
 	TEST_PR(   "ldrcch	r12, [r",11,48,", -r",10,24,"]!")
 	TEST_PR(   "ldrh	r2, [r",3,  24,"], r",4, 48,"")
 	TEST_PR(   "ldrh	r10, [r",9, 48,"], -r",11,24,"")
-	TEST_UNSUPPORTED(".word 0xe1bfc0ba	@ ldrh r12, [pc, r10]!")
-	TEST_UNSUPPORTED(".word 0xe099f0bb	@ ldrh pc, [r9], r11")
-	TEST_UNSUPPORTED(".word 0xe099a0bf	@ ldrh r10, [r9], pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe1bfc0ba) "	@ ldrh r12, [pc, r10]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe099f0bb) "	@ ldrh pc, [r9], r11")
+	TEST_UNSUPPORTED(__inst_arm(0xe099a0bf) "	@ ldrh r10, [r9], pc")
 
 	TEST_RP(   "strh	r",0, VAL1,", [r",1, 24,", #-2]")
 	TEST_RP(   "strmih	r",14,VAL2,", [r",13,0, ", #2]")
@@ -495,8 +497,8 @@ void kprobe_arm_test_cases(void)
 	TEST_RP(   "strplh	r",12,VAL2,", [r",11,24,", #-4]!")
 	TEST_RP(   "strh	r",2, VAL1,", [r",3, 24,"], #48")
 	TEST_RP(   "strh	r",10,VAL2,", [r",9, 64,"], #-48")
-	TEST_UNSUPPORTED(".word 0xe1efc3b0	@ strh r12, [pc, #48]!")
-	TEST_UNSUPPORTED(".word 0xe0c9f3b0	@ strh pc, [r9], #48")
+	TEST_UNSUPPORTED(__inst_arm(0xe1efc3b0) "	@ strh r12, [pc, #48]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe0c9f3b0) "	@ strh pc, [r9], #48")
 
 	TEST_P(	   "ldrh	r0, [r",0,  24,", #-2]")
 	TEST_P(	   "ldrvsh	r14, [r",13,0, ", #2]")
@@ -505,8 +507,8 @@ void kprobe_arm_test_cases(void)
 	TEST_P(	   "ldrh	r2, [r",3,  24,"], #48")
 	TEST_P(	   "ldrh	r10, [r",9, 64,"], #-48")
 	TEST(      "ldrh	r0, [pc, #0]")
-	TEST_UNSUPPORTED(".word 0xe1ffc3b0	@ ldrh r12, [pc, #48]!")
-	TEST_UNSUPPORTED(".word 0xe0d9f3b0	@ ldrh pc, [r9], #48")
+	TEST_UNSUPPORTED(__inst_arm(0xe1ffc3b0) "	@ ldrh r12, [pc, #48]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe0d9f3b0) "	@ ldrh pc, [r9], #48")
 
 	TEST_PR(   "ldrsb	r0, [r",0,  48,", -r",2, 24,"]")
 	TEST_PR(   "ldrhisb	r14, [r",13,0,", r",12,  48,"]")
@@ -514,8 +516,8 @@ void kprobe_arm_test_cases(void)
 	TEST_PR(   "ldrlssb	r12, [r",11,48,", -r",10,24,"]!")
 	TEST_PR(   "ldrsb	r2, [r",3,  24,"], r",4, 48,"")
 	TEST_PR(   "ldrsb	r10, [r",9, 48,"], -r",11,24,"")
-	TEST_UNSUPPORTED(".word 0xe1bfc0da	@ ldrsb r12, [pc, r10]!")
-	TEST_UNSUPPORTED(".word 0xe099f0db	@ ldrsb pc, [r9], r11")
+	TEST_UNSUPPORTED(__inst_arm(0xe1bfc0da) "	@ ldrsb r12, [pc, r10]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe099f0db) "	@ ldrsb pc, [r9], r11")
 
 	TEST_P(	   "ldrsb	r0, [r",0,  24,", #-1]")
 	TEST_P(	   "ldrgesb	r14, [r",13,0, ", #1]")
@@ -524,8 +526,8 @@ void kprobe_arm_test_cases(void)
 	TEST_P(	   "ldrsb	r2, [r",3,  24,"], #48")
 	TEST_P(	   "ldrsb	r10, [r",9, 64,"], #-48")
 	TEST(      "ldrsb	r0, [pc, #0]")
-	TEST_UNSUPPORTED(".word 0xe1ffc3d0	@ ldrsb r12, [pc, #48]!")
-	TEST_UNSUPPORTED(".word 0xe0d9f3d0	@ ldrsb pc, [r9], #48")
+	TEST_UNSUPPORTED(__inst_arm(0xe1ffc3d0) "	@ ldrsb r12, [pc, #48]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe0d9f3d0) "	@ ldrsb pc, [r9], #48")
 
 	TEST_PR(   "ldrsh	r0, [r",0,  48,", -r",2, 24,"]")
 	TEST_PR(   "ldrgtsh	r14, [r",13,0, ", r",12, 48,"]")
@@ -533,8 +535,8 @@ void kprobe_arm_test_cases(void)
 	TEST_PR(   "ldrlesh	r12, [r",11,48,", -r",10,24,"]!")
 	TEST_PR(   "ldrsh	r2, [r",3,  24,"], r",4, 48,"")
 	TEST_PR(   "ldrsh	r10, [r",9, 48,"], -r",11,24,"")
-	TEST_UNSUPPORTED(".word 0xe1bfc0fa	@ ldrsh r12, [pc, r10]!")
-	TEST_UNSUPPORTED(".word 0xe099f0fb	@ ldrsh pc, [r9], r11")
+	TEST_UNSUPPORTED(__inst_arm(0xe1bfc0fa) "	@ ldrsh r12, [pc, r10]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe099f0fb) "	@ ldrsh pc, [r9], r11")
 
 	TEST_P(	   "ldrsh	r0, [r",0,  24,", #-1]")
 	TEST_P(	   "ldreqsh	r14, [r",13,0 ,", #1]")
@@ -543,8 +545,8 @@ void kprobe_arm_test_cases(void)
 	TEST_P(	   "ldrsh	r2, [r",3,  24,"], #48")
 	TEST_P(	   "ldrsh	r10, [r",9, 64,"], #-48")
 	TEST(      "ldrsh	r0, [pc, #0]")
-	TEST_UNSUPPORTED(".word 0xe1ffc3f0	@ ldrsh r12, [pc, #48]!")
-	TEST_UNSUPPORTED(".word 0xe0d9f3f0	@ ldrsh pc, [r9], #48")
+	TEST_UNSUPPORTED(__inst_arm(0xe1ffc3f0) "	@ ldrsh r12, [pc, #48]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe0d9f3f0) "	@ ldrsh pc, [r9], #48")
 
 #if __LINUX_ARM_ARCH__ >= 7
 	TEST_UNSUPPORTED("strht	r1, [r2], r3")
@@ -563,7 +565,7 @@ void kprobe_arm_test_cases(void)
 	TEST_RPR(  "strcsd	r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
 	TEST_RPR(  "strd	r",2, VAL1,", [r",5, 24,"], r",4,48,"")
 	TEST_RPR(  "strd	r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
-	TEST_UNSUPPORTED(".word 0xe1afc0fa	@ strd r12, [pc, r10]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe1afc0fa) "	@ strd r12, [pc, r10]!")
 
 	TEST_PR(   "ldrd	r0, [r",0, 48,", -r",2,24,"]")
 	TEST_PR(   "ldrmid	r8, [r",13,0, ", r",12,48,"]")
@@ -571,10 +573,10 @@ void kprobe_arm_test_cases(void)
 	TEST_PR(   "ldrpld	r6, [r",11,48,", -r",10,24,"]!")
 	TEST_PR(   "ldrd	r2, [r",5, 24,"], r",4,48,"")
 	TEST_PR(   "ldrd	r10, [r",9,48,"], -r",7,24,"")
-	TEST_UNSUPPORTED(".word 0xe1afc0da	@ ldrd r12, [pc, r10]!")
-	TEST_UNSUPPORTED(".word 0xe089f0db	@ ldrd pc, [r9], r11")
-	TEST_UNSUPPORTED(".word 0xe089e0db	@ ldrd lr, [r9], r11")
-	TEST_UNSUPPORTED(".word 0xe089c0df	@ ldrd r12, [r9], pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe1afc0da) "	@ ldrd r12, [pc, r10]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe089f0db) "	@ ldrd pc, [r9], r11")
+	TEST_UNSUPPORTED(__inst_arm(0xe089e0db) "	@ ldrd lr, [r9], r11")
+	TEST_UNSUPPORTED(__inst_arm(0xe089c0df) "	@ ldrd r12, [r9], pc")
 
 	TEST_RP(   "strd	r",0, VAL1,", [r",1, 24,", #-8]")
 	TEST_RP(   "strvsd	r",8, VAL2,", [r",13,0, ", #8]")
@@ -582,7 +584,7 @@ void kprobe_arm_test_cases(void)
 	TEST_RP(   "strvcd	r",12,VAL2,", [r",11,24,", #-16]!")
 	TEST_RP(   "strd	r",2, VAL1,", [r",4, 24,"], #48")
 	TEST_RP(   "strd	r",10,VAL2,", [r",9, 64,"], #-48")
-	TEST_UNSUPPORTED(".word 0xe1efc3f0	@ strd r12, [pc, #48]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe1efc3f0) "	@ strd r12, [pc, #48]!")
 
 	TEST_P(	   "ldrd	r0, [r",0, 24,", #-8]")
 	TEST_P(	   "ldrhid	r8, [r",13,0, ", #8]")
@@ -590,9 +592,9 @@ void kprobe_arm_test_cases(void)
 	TEST_P(	   "ldrlsd	r6, [r",11,24,", #-16]!")
 	TEST_P(	   "ldrd	r2, [r",5, 24,"], #48")
 	TEST_P(	   "ldrd	r10, [r",9,6,"], #-48")
-	TEST_UNSUPPORTED(".word 0xe1efc3d0	@ ldrd r12, [pc, #48]!")
-	TEST_UNSUPPORTED(".word 0xe0c9f3d0	@ ldrd pc, [r9], #48")
-	TEST_UNSUPPORTED(".word 0xe0c9e3d0	@ ldrd lr, [r9], #48")
+	TEST_UNSUPPORTED(__inst_arm(0xe1efc3d0) "	@ ldrd r12, [pc, #48]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe0c9f3d0) "	@ ldrd pc, [r9], #48")
+	TEST_UNSUPPORTED(__inst_arm(0xe0c9e3d0) "	@ ldrd lr, [r9], #48")
 
 	TEST_GROUP("Miscellaneous")
 
@@ -600,11 +602,11 @@ void kprobe_arm_test_cases(void)
 	TEST("movw	r0, #0")
 	TEST("movw	r0, #0xffff")
 	TEST("movw	lr, #0xffff")
-	TEST_UNSUPPORTED(".word 0xe300f000	@ movw pc, #0")
+	TEST_UNSUPPORTED(__inst_arm(0xe300f000) "	@ movw pc, #0")
 	TEST_R("movt	r",0, VAL1,", #0")
 	TEST_R("movt	r",0, VAL2,", #0xffff")
 	TEST_R("movt	r",14,VAL1,", #0xffff")
-	TEST_UNSUPPORTED(".word 0xe340f000	@ movt pc, #0")
+	TEST_UNSUPPORTED(__inst_arm(0xe340f000) "	@ movt pc, #0")
 #endif
 
 	TEST_UNSUPPORTED("msr	cpsr, 0x13")
@@ -672,20 +674,20 @@ void kprobe_arm_test_cases(void)
 #ifdef CONFIG_THUMB2_KERNEL
 	TEST_ARM_TO_THUMB_INTERWORK_P("ldr	pc, [r",0,0,", #15*4]")
 #endif
-	TEST_UNSUPPORTED(".word 0xe5af6008	@ str r6, [pc, #8]!")
-	TEST_UNSUPPORTED(".word 0xe7af6008	@ str r6, [pc, r8]!")
-	TEST_UNSUPPORTED(".word 0xe5bf6008	@ ldr r6, [pc, #8]!")
-	TEST_UNSUPPORTED(".word 0xe7bf6008	@ ldr r6, [pc, r8]!")
-	TEST_UNSUPPORTED(".word 0xe788600f	@ str r6, [r8, pc]")
-	TEST_UNSUPPORTED(".word 0xe798600f	@ ldr r6, [r8, pc]")
+	TEST_UNSUPPORTED(__inst_arm(0xe5af6008) "	@ str r6, [pc, #8]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe7af6008) "	@ str r6, [pc, r8]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe5bf6008) "	@ ldr r6, [pc, #8]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe7bf6008) "	@ ldr r6, [pc, r8]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe788600f) "	@ str r6, [r8, pc]")
+	TEST_UNSUPPORTED(__inst_arm(0xe798600f) "	@ ldr r6, [r8, pc]")
 
 	LOAD_STORE("b")
-	TEST_UNSUPPORTED(".word 0xe5f7f008	@ ldrb pc, [r7, #8]!")
-	TEST_UNSUPPORTED(".word 0xe7f7f008	@ ldrb pc, [r7, r8]!")
-	TEST_UNSUPPORTED(".word 0xe5ef6008	@ strb r6, [pc, #8]!")
-	TEST_UNSUPPORTED(".word 0xe7ef6008	@ strb r6, [pc, r3]!")
-	TEST_UNSUPPORTED(".word 0xe5ff6008	@ ldrb r6, [pc, #8]!")
-	TEST_UNSUPPORTED(".word 0xe7ff6008	@ ldrb r6, [pc, r3]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe5f7f008) "	@ ldrb pc, [r7, #8]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe7f7f008) "	@ ldrb pc, [r7, r8]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe5ef6008) "	@ strb r6, [pc, #8]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe7ef6008) "	@ strb r6, [pc, r3]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe5ff6008) "	@ ldrb r6, [pc, #8]!")
+	TEST_UNSUPPORTED(__inst_arm(0xe7ff6008) "	@ ldrb r6, [pc, r3]!")
 
 	TEST_UNSUPPORTED("ldrt	r0, [r1], #4")
 	TEST_UNSUPPORTED("ldrt	r1, [r2], r3")
@@ -699,153 +701,153 @@ void kprobe_arm_test_cases(void)
 #if __LINUX_ARM_ARCH__ >= 7
 	TEST_GROUP("Parallel addition and subtraction, signed")
 
-	TEST_UNSUPPORTED(".word 0xe6000010") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe60fffff") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe6000010) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe60fffff) "") /* Unallocated space */
 
 	TEST_RR(    "sadd16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "sadd16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe61cff1a	@ sadd16	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe61cff1a) "	@ sadd16	pc, r12, r10")
 	TEST_RR(    "sasx	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "sasx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe61cff3a	@ sasx	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe61cff3a) "	@ sasx	pc, r12, r10")
 	TEST_RR(    "ssax	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "ssax	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe61cff5a	@ ssax	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe61cff5a) "	@ ssax	pc, r12, r10")
 	TEST_RR(    "ssub16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "ssub16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe61cff7a	@ ssub16	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe61cff7a) "	@ ssub16	pc, r12, r10")
 	TEST_RR(    "sadd8	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "sadd8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe61cff9a	@ sadd8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe61000b0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe61fffbf") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe61000d0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe61fffdf") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe61cff9a) "	@ sadd8	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe61000b0) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe61fffbf) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe61000d0) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe61fffdf) "") /* Unallocated space */
 	TEST_RR(    "ssub8	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "ssub8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe61cfffa	@ ssub8	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe61cfffa) "	@ ssub8	pc, r12, r10")
 
 	TEST_RR(    "qadd16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "qadd16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe62cff1a	@ qadd16	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe62cff1a) "	@ qadd16	pc, r12, r10")
 	TEST_RR(    "qasx	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "qasx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe62cff3a	@ qasx	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe62cff3a) "	@ qasx	pc, r12, r10")
 	TEST_RR(    "qsax	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "qsax	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe62cff5a	@ qsax	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe62cff5a) "	@ qsax	pc, r12, r10")
 	TEST_RR(    "qsub16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "qsub16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe62cff7a	@ qsub16	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe62cff7a) "	@ qsub16	pc, r12, r10")
 	TEST_RR(    "qadd8	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "qadd8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe62cff9a	@ qadd8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe62000b0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe62fffbf") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe62000d0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe62fffdf") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe62cff9a) "	@ qadd8	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe62000b0) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe62fffbf) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe62000d0) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe62fffdf) "") /* Unallocated space */
 	TEST_RR(    "qsub8	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "qsub8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe62cfffa	@ qsub8	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe62cfffa) "	@ qsub8	pc, r12, r10")
 
 	TEST_RR(    "shadd16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "shadd16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe63cff1a	@ shadd16	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe63cff1a) "	@ shadd16	pc, r12, r10")
 	TEST_RR(    "shasx	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "shasx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe63cff3a	@ shasx	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe63cff3a) "	@ shasx	pc, r12, r10")
 	TEST_RR(    "shsax	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "shsax	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe63cff5a	@ shsax	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe63cff5a) "	@ shsax	pc, r12, r10")
 	TEST_RR(    "shsub16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "shsub16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe63cff7a	@ shsub16	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe63cff7a) "	@ shsub16	pc, r12, r10")
 	TEST_RR(    "shadd8	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "shadd8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe63cff9a	@ shadd8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe63000b0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe63fffbf") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe63000d0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe63fffdf") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe63cff9a) "	@ shadd8	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe63000b0) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe63fffbf) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe63000d0) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe63fffdf) "") /* Unallocated space */
 	TEST_RR(    "shsub8	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "shsub8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe63cfffa	@ shsub8	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe63cfffa) "	@ shsub8	pc, r12, r10")
 
 	TEST_GROUP("Parallel addition and subtraction, unsigned")
 
-	TEST_UNSUPPORTED(".word 0xe6400010") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe64fffff") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe6400010) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe64fffff) "") /* Unallocated space */
 
 	TEST_RR(    "uadd16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uadd16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe65cff1a	@ uadd16	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe65cff1a) "	@ uadd16	pc, r12, r10")
 	TEST_RR(    "uasx	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uasx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe65cff3a	@ uasx	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe65cff3a) "	@ uasx	pc, r12, r10")
 	TEST_RR(    "usax	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "usax	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe65cff5a	@ usax	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe65cff5a) "	@ usax	pc, r12, r10")
 	TEST_RR(    "usub16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "usub16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe65cff7a	@ usub16	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe65cff7a) "	@ usub16	pc, r12, r10")
 	TEST_RR(    "uadd8	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uadd8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe65cff9a	@ uadd8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe65000b0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe65fffbf") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe65000d0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe65fffdf") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe65cff9a) "	@ uadd8	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe65000b0) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe65fffbf) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe65000d0) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe65fffdf) "") /* Unallocated space */
 	TEST_RR(    "usub8	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "usub8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe65cfffa	@ usub8	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe65cfffa) "	@ usub8	pc, r12, r10")
 
 	TEST_RR(    "uqadd16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uqadd16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe66cff1a	@ uqadd16	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe66cff1a) "	@ uqadd16	pc, r12, r10")
 	TEST_RR(    "uqasx	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uqasx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe66cff3a	@ uqasx	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe66cff3a) "	@ uqasx	pc, r12, r10")
 	TEST_RR(    "uqsax	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uqsax	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe66cff5a	@ uqsax	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe66cff5a) "	@ uqsax	pc, r12, r10")
 	TEST_RR(    "uqsub16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uqsub16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe66cff7a	@ uqsub16	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe66cff7a) "	@ uqsub16	pc, r12, r10")
 	TEST_RR(    "uqadd8	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uqadd8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe66cff9a	@ uqadd8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe66000b0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe66fffbf") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe66000d0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe66fffdf") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe66cff9a) "	@ uqadd8	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe66000b0) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe66fffbf) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe66000d0) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe66fffdf) "") /* Unallocated space */
 	TEST_RR(    "uqsub8	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uqsub8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe66cfffa	@ uqsub8	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe66cfffa) "	@ uqsub8	pc, r12, r10")
 
 	TEST_RR(    "uhadd16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uhadd16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe67cff1a	@ uhadd16	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe67cff1a) "	@ uhadd16	pc, r12, r10")
 	TEST_RR(    "uhasx	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uhasx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe67cff3a	@ uhasx	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe67cff3a) "	@ uhasx	pc, r12, r10")
 	TEST_RR(    "uhsax	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uhsax	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe67cff5a	@ uhsax	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe67cff5a) "	@ uhsax	pc, r12, r10")
 	TEST_RR(    "uhsub16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uhsub16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe67cff7a	@ uhsub16	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe67cff7a) "	@ uhsub16	pc, r12, r10")
 	TEST_RR(    "uhadd8	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uhadd8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe67cff9a	@ uhadd8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe67000b0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe67fffbf") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe67000d0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe67fffdf") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe67cff9a) "	@ uhadd8	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe67000b0) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe67fffbf) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe67000d0) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe67fffdf) "") /* Unallocated space */
 	TEST_RR(    "uhsub8	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uhsub8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe67cfffa	@ uhsub8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe67feffa	@ uhsub8	r14, pc, r10")
-	TEST_UNSUPPORTED(".word 0xe67cefff	@ uhsub8	r14, r12, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe67cfffa) "	@ uhsub8	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe67feffa) "	@ uhsub8	r14, pc, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe67cefff) "	@ uhsub8	r14, r12, pc")
 #endif /* __LINUX_ARM_ARCH__ >= 7 */
 
 #if __LINUX_ARM_ARCH__ >= 6
@@ -853,99 +855,99 @@ void kprobe_arm_test_cases(void)
 
 	TEST_RR(    "pkhbt	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "pkhbt	r14,r",12, HH1,", r",10,HH2,", lsl #2")
-	TEST_UNSUPPORTED(".word 0xe68cf11a	@ pkhbt	pc, r12, r10, lsl #2")
+	TEST_UNSUPPORTED(__inst_arm(0xe68cf11a) "	@ pkhbt	pc, r12, r10, lsl #2")
 	TEST_RR(    "pkhtb	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "pkhtb	r14,r",12, HH1,", r",10,HH2,", asr #2")
-	TEST_UNSUPPORTED(".word 0xe68cf15a	@ pkhtb	pc, r12, r10, asr #2")
-	TEST_UNSUPPORTED(".word 0xe68fe15a	@ pkhtb	r14, pc, r10, asr #2")
-	TEST_UNSUPPORTED(".word 0xe68ce15f	@ pkhtb	r14, r12, pc, asr #2")
-	TEST_UNSUPPORTED(".word 0xe6900010") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe69fffdf") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe68cf15a) "	@ pkhtb	pc, r12, r10, asr #2")
+	TEST_UNSUPPORTED(__inst_arm(0xe68fe15a) "	@ pkhtb	r14, pc, r10, asr #2")
+	TEST_UNSUPPORTED(__inst_arm(0xe68ce15f) "	@ pkhtb	r14, r12, pc, asr #2")
+	TEST_UNSUPPORTED(__inst_arm(0xe6900010) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe69fffdf) "") /* Unallocated space */
 
 	TEST_R(     "ssat	r0, #24, r",0,   VAL1,"")
 	TEST_R(     "ssat	r14, #24, r",12, VAL2,"")
 	TEST_R(     "ssat	r0, #24, r",0,   VAL1,", lsl #8")
 	TEST_R(     "ssat	r14, #24, r",12, VAL2,", asr #8")
-	TEST_UNSUPPORTED(".word 0xe6b7f01c	@ ssat	pc, #24, r12")
+	TEST_UNSUPPORTED(__inst_arm(0xe6b7f01c) "	@ ssat	pc, #24, r12")
 
 	TEST_R(     "usat	r0, #24, r",0,   VAL1,"")
 	TEST_R(     "usat	r14, #24, r",12, VAL2,"")
 	TEST_R(     "usat	r0, #24, r",0,   VAL1,", lsl #8")
 	TEST_R(     "usat	r14, #24, r",12, VAL2,", asr #8")
-	TEST_UNSUPPORTED(".word 0xe6f7f01c	@ usat	pc, #24, r12")
+	TEST_UNSUPPORTED(__inst_arm(0xe6f7f01c) "	@ usat	pc, #24, r12")
 
 	TEST_RR(    "sxtab16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "sxtab16	r14,r",12, HH2,", r",10,HH1,", ror #8")
 	TEST_R(     "sxtb16	r8, r",7,  HH1,"")
-	TEST_UNSUPPORTED(".word 0xe68cf47a	@ sxtab16	pc,r12, r10, ror #8")
+	TEST_UNSUPPORTED(__inst_arm(0xe68cf47a) "	@ sxtab16	pc,r12, r10, ror #8")
 
 	TEST_RR(    "sel	r0, r",0,  VAL1,", r",1, VAL2,"")
 	TEST_RR(    "sel	r14, r",12,VAL1,", r",10, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe68cffba	@ sel	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe68fefba	@ sel	r14, pc, r10")
-	TEST_UNSUPPORTED(".word 0xe68cefbf	@ sel	r14, r12, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe68cffba) "	@ sel	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe68fefba) "	@ sel	r14, pc, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe68cefbf) "	@ sel	r14, r12, pc")
 
 	TEST_R(     "ssat16	r0, #12, r",0,   HH1,"")
 	TEST_R(     "ssat16	r14, #12, r",12, HH2,"")
-	TEST_UNSUPPORTED(".word 0xe6abff3c	@ ssat16	pc, #12, r12")
+	TEST_UNSUPPORTED(__inst_arm(0xe6abff3c) "	@ ssat16	pc, #12, r12")
 
 	TEST_RR(    "sxtab	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "sxtab	r14,r",12, HH2,", r",10,HH1,", ror #8")
 	TEST_R(     "sxtb	r8, r",7,  HH1,"")
-	TEST_UNSUPPORTED(".word 0xe6acf47a	@ sxtab	pc,r12, r10, ror #8")
+	TEST_UNSUPPORTED(__inst_arm(0xe6acf47a) "	@ sxtab	pc,r12, r10, ror #8")
 
 	TEST_R(     "rev	r0, r",0,   VAL1,"")
 	TEST_R(     "rev	r14, r",12, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe6bfff3c	@ rev	pc, r12")
+	TEST_UNSUPPORTED(__inst_arm(0xe6bfff3c) "	@ rev	pc, r12")
 
 	TEST_RR(    "sxtah	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "sxtah	r14,r",12, HH2,", r",10,HH1,", ror #8")
 	TEST_R(     "sxth	r8, r",7,  HH1,"")
-	TEST_UNSUPPORTED(".word 0xe6bcf47a	@ sxtah	pc,r12, r10, ror #8")
+	TEST_UNSUPPORTED(__inst_arm(0xe6bcf47a) "	@ sxtah	pc,r12, r10, ror #8")
 
 	TEST_R(     "rev16	r0, r",0,   VAL1,"")
 	TEST_R(     "rev16	r14, r",12, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe6bfffbc	@ rev16	pc, r12")
+	TEST_UNSUPPORTED(__inst_arm(0xe6bfffbc) "	@ rev16	pc, r12")
 
 	TEST_RR(    "uxtab16	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uxtab16	r14,r",12, HH2,", r",10,HH1,", ror #8")
 	TEST_R(     "uxtb16	r8, r",7,  HH1,"")
-	TEST_UNSUPPORTED(".word 0xe6ccf47a	@ uxtab16	pc,r12, r10, ror #8")
+	TEST_UNSUPPORTED(__inst_arm(0xe6ccf47a) "	@ uxtab16	pc,r12, r10, ror #8")
 
 	TEST_R(     "usat16	r0, #12, r",0,   HH1,"")
 	TEST_R(     "usat16	r14, #12, r",12, HH2,"")
-	TEST_UNSUPPORTED(".word 0xe6ecff3c	@ usat16	pc, #12, r12")
-	TEST_UNSUPPORTED(".word 0xe6ecef3f	@ usat16	r14, #12, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe6ecff3c) "	@ usat16	pc, #12, r12")
+	TEST_UNSUPPORTED(__inst_arm(0xe6ecef3f) "	@ usat16	r14, #12, pc")
 
 	TEST_RR(    "uxtab	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uxtab	r14,r",12, HH2,", r",10,HH1,", ror #8")
 	TEST_R(     "uxtb	r8, r",7,  HH1,"")
-	TEST_UNSUPPORTED(".word 0xe6ecf47a	@ uxtab	pc,r12, r10, ror #8")
+	TEST_UNSUPPORTED(__inst_arm(0xe6ecf47a) "	@ uxtab	pc,r12, r10, ror #8")
 
 #if __LINUX_ARM_ARCH__ >= 7
 	TEST_R(     "rbit	r0, r",0,   VAL1,"")
 	TEST_R(     "rbit	r14, r",12, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe6ffff3c	@ rbit	pc, r12")
+	TEST_UNSUPPORTED(__inst_arm(0xe6ffff3c) "	@ rbit	pc, r12")
 #endif
 
 	TEST_RR(    "uxtah	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uxtah	r14,r",12, HH2,", r",10,HH1,", ror #8")
 	TEST_R(     "uxth	r8, r",7,  HH1,"")
-	TEST_UNSUPPORTED(".word 0xe6fff077	@ uxth	pc, r7")
-	TEST_UNSUPPORTED(".word 0xe6ff807f	@ uxth	r8, pc")
-	TEST_UNSUPPORTED(".word 0xe6fcf47a	@ uxtah	pc, r12, r10, ror #8")
-	TEST_UNSUPPORTED(".word 0xe6fce47f	@ uxtah	r14, r12, pc, ror #8")
+	TEST_UNSUPPORTED(__inst_arm(0xe6fff077) "	@ uxth	pc, r7")
+	TEST_UNSUPPORTED(__inst_arm(0xe6ff807f) "	@ uxth	r8, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe6fcf47a) "	@ uxtah	pc, r12, r10, ror #8")
+	TEST_UNSUPPORTED(__inst_arm(0xe6fce47f) "	@ uxtah	r14, r12, pc, ror #8")
 
 	TEST_R(     "revsh	r0, r",0,   VAL1,"")
 	TEST_R(     "revsh	r14, r",12, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe6ffff3c	@ revsh	pc, r12")
-	TEST_UNSUPPORTED(".word 0xe6ffef3f	@ revsh	r14, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe6ffff3c) "	@ revsh	pc, r12")
+	TEST_UNSUPPORTED(__inst_arm(0xe6ffef3f) "	@ revsh	r14, pc")
 
-	TEST_UNSUPPORTED(".word 0xe6900070") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe69fff7f") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe6900070) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe69fff7f) "") /* Unallocated space */
 
-	TEST_UNSUPPORTED(".word 0xe6d00070") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe6dfff7f") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe6d00070) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_arm(0xe6dfff7f) "") /* Unallocated space */
 #endif /* __LINUX_ARM_ARCH__ >= 6 */
 
 #if __LINUX_ARM_ARCH__ >= 6
@@ -953,79 +955,79 @@ void kprobe_arm_test_cases(void)
 
 	TEST_RRR(   "smlad	r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
 	TEST_RRR(   "smlad	r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe70f8a1c	@ smlad	pc, r12, r10, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe70f8a1c) "	@ smlad	pc, r12, r10, r8")
 	TEST_RRR(   "smladx	r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
 	TEST_RRR(   "smladx	r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe70f8a3c	@ smladx	pc, r12, r10, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe70f8a3c) "	@ smladx	pc, r12, r10, r8")
 
 	TEST_RR(   "smuad	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(   "smuad	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe70ffa1c	@ smuad	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe70ffa1c) "	@ smuad	pc, r12, r10")
 	TEST_RR(   "smuadx	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(   "smuadx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe70ffa3c	@ smuadx	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe70ffa3c) "	@ smuadx	pc, r12, r10")
 
 	TEST_RRR(   "smlsd	r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
 	TEST_RRR(   "smlsd	r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe70f8a5c	@ smlsd	pc, r12, r10, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe70f8a5c) "	@ smlsd	pc, r12, r10, r8")
 	TEST_RRR(   "smlsdx	r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
 	TEST_RRR(   "smlsdx	r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe70f8a7c	@ smlsdx	pc, r12, r10, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe70f8a7c) "	@ smlsdx	pc, r12, r10, r8")
 
 	TEST_RR(   "smusd	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(   "smusd	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe70ffa5c	@ smusd	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe70ffa5c) "	@ smusd	pc, r12, r10")
 	TEST_RR(   "smusdx	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(   "smusdx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe70ffa7c	@ smusdx	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe70ffa7c) "	@ smusdx	pc, r12, r10")
 
 	TEST_RRRR( "smlald	r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
 	TEST_RRRR( "smlald	r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
-	TEST_UNSUPPORTED(".word 0xe74af819	@ smlald	pc, r10, r9, r8")
-	TEST_UNSUPPORTED(".word 0xe74fb819	@ smlald	r11, pc, r9, r8")
-	TEST_UNSUPPORTED(".word 0xe74ab81f	@ smlald	r11, r10, pc, r8")
-	TEST_UNSUPPORTED(".word 0xe74abf19	@ smlald	r11, r10, r9, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe74af819) "	@ smlald	pc, r10, r9, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe74fb819) "	@ smlald	r11, pc, r9, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe74ab81f) "	@ smlald	r11, r10, pc, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe74abf19) "	@ smlald	r11, r10, r9, pc")
 
 	TEST_RRRR( "smlaldx	r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
 	TEST_RRRR( "smlaldx	r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
-	TEST_UNSUPPORTED(".word 0xe74af839	@ smlaldx	pc, r10, r9, r8")
-	TEST_UNSUPPORTED(".word 0xe74fb839	@ smlaldx	r11, pc, r9, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe74af839) "	@ smlaldx	pc, r10, r9, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe74fb839) "	@ smlaldx	r11, pc, r9, r8")
 
 	TEST_RRR(  "smmla	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
 	TEST_RRR(  "smmla	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe75f8a1c	@ smmla	pc, r12, r10, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe75f8a1c) "	@ smmla	pc, r12, r10, r8")
 	TEST_RRR(  "smmlar	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
 	TEST_RRR(  "smmlar	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe75f8a3c	@ smmlar	pc, r12, r10, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe75f8a3c) "	@ smmlar	pc, r12, r10, r8")
 
 	TEST_RR(   "smmul	r0, r",0,  VAL1,", r",1, VAL2,"")
 	TEST_RR(   "smmul	r14, r",12,VAL2,", r",10,VAL1,"")
-	TEST_UNSUPPORTED(".word 0xe75ffa1c	@ smmul	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe75ffa1c) "	@ smmul	pc, r12, r10")
 	TEST_RR(   "smmulr	r0, r",0,  VAL1,", r",1, VAL2,"")
 	TEST_RR(   "smmulr	r14, r",12,VAL2,", r",10,VAL1,"")
-	TEST_UNSUPPORTED(".word 0xe75ffa3c	@ smmulr	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe75ffa3c) "	@ smmulr	pc, r12, r10")
 
 	TEST_RRR(  "smmls	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
 	TEST_RRR(  "smmls	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe75f8adc	@ smmls	pc, r12, r10, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe75f8adc) "	@ smmls	pc, r12, r10, r8")
 	TEST_RRR(  "smmlsr	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
 	TEST_RRR(  "smmlsr	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe75f8afc	@ smmlsr	pc, r12, r10, r8")
-	TEST_UNSUPPORTED(".word 0xe75e8aff	@ smmlsr	r14, pc, r10, r8")
-	TEST_UNSUPPORTED(".word 0xe75e8ffc	@ smmlsr	r14, r12, pc, r8")
-	TEST_UNSUPPORTED(".word 0xe75efafc	@ smmlsr	r14, r12, r10, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe75f8afc) "	@ smmlsr	pc, r12, r10, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe75e8aff) "	@ smmlsr	r14, pc, r10, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe75e8ffc) "	@ smmlsr	r14, r12, pc, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe75efafc) "	@ smmlsr	r14, r12, r10, pc")
 
 	TEST_RR(   "usad8	r0, r",0,  VAL1,", r",1, VAL2,"")
 	TEST_RR(   "usad8	r14, r",12,VAL2,", r",10,VAL1,"")
-	TEST_UNSUPPORTED(".word 0xe75ffa1c	@ usad8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe75efa1f	@ usad8	r14, pc, r10")
-	TEST_UNSUPPORTED(".word 0xe75eff1c	@ usad8	r14, r12, pc")
+	TEST_UNSUPPORTED(__inst_arm(0xe75ffa1c) "	@ usad8	pc, r12, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe75efa1f) "	@ usad8	r14, pc, r10")
+	TEST_UNSUPPORTED(__inst_arm(0xe75eff1c) "	@ usad8	r14, r12, pc")
 
 	TEST_RRR(  "usada8	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL3,"")
 	TEST_RRR(  "usada8	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
-	TEST_UNSUPPORTED(".word 0xe78f8a1c	@ usada8	pc, r12, r10, r8")
-	TEST_UNSUPPORTED(".word 0xe78e8a1f	@ usada8	r14, pc, r10, r8")
-	TEST_UNSUPPORTED(".word 0xe78e8f1c	@ usada8	r14, r12, pc, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe78f8a1c) "	@ usada8	pc, r12, r10, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe78e8a1f) "	@ usada8	r14, pc, r10, r8")
+	TEST_UNSUPPORTED(__inst_arm(0xe78e8f1c) "	@ usada8	r14, r12, pc, r8")
 #endif /* __LINUX_ARM_ARCH__ >= 6 */
 
 #if __LINUX_ARM_ARCH__ >= 7
@@ -1034,26 +1036,26 @@ void kprobe_arm_test_cases(void)
 	TEST_R(     "sbfx	r0, r",0  , VAL1,", #0, #31")
 	TEST_R(     "sbfxeq	r14, r",12, VAL2,", #8, #16")
 	TEST_R(     "sbfx	r4, r",10,  VAL1,", #16, #15")
-	TEST_UNSUPPORTED(".word 0xe7aff45c	@ sbfx	pc, r12, #8, #16")
+	TEST_UNSUPPORTED(__inst_arm(0xe7aff45c) "	@ sbfx	pc, r12, #8, #16")
 
 	TEST_R(     "ubfx	r0, r",0  , VAL1,", #0, #31")
 	TEST_R(     "ubfxcs	r14, r",12, VAL2,", #8, #16")
 	TEST_R(     "ubfx	r4, r",10,  VAL1,", #16, #15")
-	TEST_UNSUPPORTED(".word 0xe7eff45c	@ ubfx	pc, r12, #8, #16")
-	TEST_UNSUPPORTED(".word 0xe7efc45f	@ ubfx	r12, pc, #8, #16")
+	TEST_UNSUPPORTED(__inst_arm(0xe7eff45c) "	@ ubfx	pc, r12, #8, #16")
+	TEST_UNSUPPORTED(__inst_arm(0xe7efc45f) "	@ ubfx	r12, pc, #8, #16")
 
 	TEST_R(     "bfc	r",0, VAL1,", #4, #20")
 	TEST_R(     "bfcvs	r",14,VAL2,", #4, #20")
 	TEST_R(     "bfc	r",7, VAL1,", #0, #31")
 	TEST_R(     "bfc	r",8, VAL2,", #0, #31")
-	TEST_UNSUPPORTED(".word 0xe7def01f	@ bfc	pc, #0, #31");
+	TEST_UNSUPPORTED(__inst_arm(0xe7def01f) "	@ bfc	pc, #0, #31");
 
 	TEST_RR(    "bfi	r",0, VAL1,", r",0  , VAL2,", #0, #31")
 	TEST_RR(    "bfipl	r",12,VAL1,", r",14 , VAL2,", #4, #20")
-	TEST_UNSUPPORTED(".word 0xe7d7f21e	@ bfi	pc, r14, #4, #20")
+	TEST_UNSUPPORTED(__inst_arm(0xe7d7f21e) "	@ bfi	pc, r14, #4, #20")
 
-	TEST_UNSUPPORTED(".word 0x07f000f0")  /* Permanently UNDEFINED */
-	TEST_UNSUPPORTED(".word 0x07ffffff")  /* Permanently UNDEFINED */
+	TEST_UNSUPPORTED(__inst_arm(0x07f000f0) "")  /* Permanently UNDEFINED */
+	TEST_UNSUPPORTED(__inst_arm(0x07ffffff) "")  /* Permanently UNDEFINED */
 #endif /* __LINUX_ARM_ARCH__ >= 6 */
 
 	TEST_GROUP("Branch, branch with link, and block data transfer")
@@ -1180,43 +1182,43 @@ void kprobe_arm_test_cases(void)
 										\
 	TEST_COPROCESSOR( "stc"two"	0, cr0, [r15, #4]")			\
 	TEST_COPROCESSOR( "stc"two"	0, cr0, [r15, #-4]")			\
-	TEST_UNSUPPORTED(".word 0x"cc"daf0001	@ stc"two"	0, cr0, [r15, #4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"d2f0001	@ stc"two"	0, cr0, [r15, #-4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"caf0001	@ stc"two"	0, cr0, [r15], #4")	\
-	TEST_UNSUPPORTED(".word 0x"cc"c2f0001	@ stc"two"	0, cr0, [r15], #-4")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##daf0001) "	@ stc"two"	0, cr0, [r15, #4]!")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##d2f0001) "	@ stc"two"	0, cr0, [r15, #-4]!")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##caf0001) "	@ stc"two"	0, cr0, [r15], #4")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##c2f0001) "	@ stc"two"	0, cr0, [r15], #-4")	\
 	TEST_COPROCESSOR( "stc"two"	0, cr0, [r15], {1}")			\
 	TEST_COPROCESSOR( "stc"two"l	0, cr0, [r15, #4]")			\
 	TEST_COPROCESSOR( "stc"two"l	0, cr0, [r15, #-4]")			\
-	TEST_UNSUPPORTED(".word 0x"cc"def0001	@ stc"two"l	0, cr0, [r15, #4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"d6f0001	@ stc"two"l	0, cr0, [r15, #-4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"cef0001	@ stc"two"l	0, cr0, [r15], #4")	\
-	TEST_UNSUPPORTED(".word 0x"cc"c6f0001	@ stc"two"l	0, cr0, [r15], #-4")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##def0001) "	@ stc"two"l	0, cr0, [r15, #4]!")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##d6f0001) "	@ stc"two"l	0, cr0, [r15, #-4]!")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##cef0001) "	@ stc"two"l	0, cr0, [r15], #4")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##c6f0001) "	@ stc"two"l	0, cr0, [r15], #-4")	\
 	TEST_COPROCESSOR( "stc"two"l	0, cr0, [r15], {1}")			\
 	TEST_COPROCESSOR( "ldc"two"	0, cr0, [r15, #4]")			\
 	TEST_COPROCESSOR( "ldc"two"	0, cr0, [r15, #-4]")			\
-	TEST_UNSUPPORTED(".word 0x"cc"dbf0001	@ ldc"two"	0, cr0, [r15, #4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"d3f0001	@ ldc"two"	0, cr0, [r15, #-4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"cbf0001	@ ldc"two"	0, cr0, [r15], #4")	\
-	TEST_UNSUPPORTED(".word 0x"cc"c3f0001	@ ldc"two"	0, cr0, [r15], #-4")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##dbf0001) "	@ ldc"two"	0, cr0, [r15, #4]!")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##d3f0001) "	@ ldc"two"	0, cr0, [r15, #-4]!")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##cbf0001) "	@ ldc"two"	0, cr0, [r15], #4")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##c3f0001) "	@ ldc"two"	0, cr0, [r15], #-4")	\
 	TEST_COPROCESSOR( "ldc"two"	0, cr0, [r15], {1}")			\
 	TEST_COPROCESSOR( "ldc"two"l	0, cr0, [r15, #4]")			\
 	TEST_COPROCESSOR( "ldc"two"l	0, cr0, [r15, #-4]")			\
-	TEST_UNSUPPORTED(".word 0x"cc"dff0001	@ ldc"two"l	0, cr0, [r15, #4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"d7f0001	@ ldc"two"l	0, cr0, [r15, #-4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"cff0001	@ ldc"two"l	0, cr0, [r15], #4")	\
-	TEST_UNSUPPORTED(".word 0x"cc"c7f0001	@ ldc"two"l	0, cr0, [r15], #-4")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##dff0001) "	@ ldc"two"l	0, cr0, [r15, #4]!")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##d7f0001) "	@ ldc"two"l	0, cr0, [r15, #-4]!")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##cff0001) "	@ ldc"two"l	0, cr0, [r15], #4")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##c7f0001) "	@ ldc"two"l	0, cr0, [r15], #-4")	\
 	TEST_COPROCESSOR( "ldc"two"l	0, cr0, [r15], {1}")
 
 #define COPROCESSOR_INSTRUCTIONS_MC_MR(two,cc)					\
 										\
 	TEST_COPROCESSOR( "mcrr"two"	0, 15, r0, r14, cr0")			\
 	TEST_COPROCESSOR( "mcrr"two"	15, 0, r14, r0, cr15")			\
-	TEST_UNSUPPORTED(".word 0x"cc"c4f00f0	@ mcrr"two"	0, 15, r0, r15, cr0")	\
-	TEST_UNSUPPORTED(".word 0x"cc"c40ff0f	@ mcrr"two"	15, 0, r15, r0, cr15")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##c4f00f0) "	@ mcrr"two"	0, 15, r0, r15, cr0")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##c40ff0f) "	@ mcrr"two"	15, 0, r15, r0, cr15")	\
 	TEST_COPROCESSOR( "mrrc"two"	0, 15, r0, r14, cr0")			\
 	TEST_COPROCESSOR( "mrrc"two"	15, 0, r14, r0, cr15")			\
-	TEST_UNSUPPORTED(".word 0x"cc"c5f00f0	@ mrrc"two"	0, 15, r0, r15, cr0")	\
-	TEST_UNSUPPORTED(".word 0x"cc"c50ff0f	@ mrrc"two"	15, 0, r15, r0, cr15")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##c5f00f0) "	@ mrrc"two"	0, 15, r0, r15, cr0")	\
+	TEST_UNSUPPORTED(__inst_arm(0x##cc##c50ff0f) "	@ mrrc"two"	15, 0, r15, r0, cr15")	\
 	TEST_COPROCESSOR( "cdp"two"	15, 15, cr15, cr15, cr15, 7")		\
 	TEST_COPROCESSOR( "cdp"two"	0, 0, cr0, cr0, cr0, 0")		\
 	TEST_COPROCESSOR( "mcr"two"	15, 7, r15, cr15, cr15, 7")		\
@@ -1224,8 +1226,8 @@ void kprobe_arm_test_cases(void)
 	TEST_COPROCESSOR( "mrc"two"	15, 7, r15, cr15, cr15, 7")		\
 	TEST_COPROCESSOR( "mrc"two"	0, 0, r0, cr0, cr0, 0")
 
-	COPROCESSOR_INSTRUCTIONS_ST_LD("","e")
-	COPROCESSOR_INSTRUCTIONS_MC_MR("","e")
+	COPROCESSOR_INSTRUCTIONS_ST_LD("",e)
+	COPROCESSOR_INSTRUCTIONS_MC_MR("",e)
 	TEST_UNSUPPORTED("svc	0")
 	TEST_UNSUPPORTED("svc	0xffffff")
 
@@ -1251,14 +1253,14 @@ void kprobe_arm_test_cases(void)
 	TEST_UNSUPPORTED("rfedb	sp!")
 	TEST_UNSUPPORTED("rfeia	sp!")
 	TEST_UNSUPPORTED("rfeib	sp!")
-	TEST_UNSUPPORTED(".word 0xf81d0a00	@ rfeda	pc")
-	TEST_UNSUPPORTED(".word 0xf91d0a00	@ rfedb	pc")
-	TEST_UNSUPPORTED(".word 0xf89d0a00	@ rfeia	pc")
-	TEST_UNSUPPORTED(".word 0xf99d0a00	@ rfeib	pc")
-	TEST_UNSUPPORTED(".word 0xf83d0a00	@ rfeda	pc!")
-	TEST_UNSUPPORTED(".word 0xf93d0a00	@ rfedb	pc!")
-	TEST_UNSUPPORTED(".word 0xf8bd0a00	@ rfeia	pc!")
-	TEST_UNSUPPORTED(".word 0xf9bd0a00	@ rfeib	pc!")
+	TEST_UNSUPPORTED(__inst_arm(0xf81d0a00) "	@ rfeda	pc")
+	TEST_UNSUPPORTED(__inst_arm(0xf91d0a00) "	@ rfedb	pc")
+	TEST_UNSUPPORTED(__inst_arm(0xf89d0a00) "	@ rfeia	pc")
+	TEST_UNSUPPORTED(__inst_arm(0xf99d0a00) "	@ rfeib	pc")
+	TEST_UNSUPPORTED(__inst_arm(0xf83d0a00) "	@ rfeda	pc!")
+	TEST_UNSUPPORTED(__inst_arm(0xf93d0a00) "	@ rfedb	pc!")
+	TEST_UNSUPPORTED(__inst_arm(0xf8bd0a00) "	@ rfeia	pc!")
+	TEST_UNSUPPORTED(__inst_arm(0xf9bd0a00) "	@ rfeib	pc!")
 #endif /* __LINUX_ARM_ARCH__ >= 6 */
 
 #if __LINUX_ARM_ARCH__ >= 6
@@ -1285,9 +1287,9 @@ void kprobe_arm_test_cases(void)
 	TEST(	"blx	__dummy_thumb_subroutine_odd")
 #endif /* __LINUX_ARM_ARCH__ >= 6 */
 
-	COPROCESSOR_INSTRUCTIONS_ST_LD("2","f")
+	COPROCESSOR_INSTRUCTIONS_ST_LD("2",f)
 #if __LINUX_ARM_ARCH__ >= 6
-	COPROCESSOR_INSTRUCTIONS_MC_MR("2","f")
+	COPROCESSOR_INSTRUCTIONS_MC_MR("2",f)
 #endif
 
 	TEST_GROUP("Miscellaneous instructions, memory hints, and Advanced SIMD instructions")
@@ -1317,9 +1319,9 @@ void kprobe_arm_test_cases(void)
 #endif
 
 #if __LINUX_ARM_ARCH__ >= 7
-	TEST_SUPPORTED(  ".word 0xf590f000	@ pldw [r0, #0]")
-	TEST_SUPPORTED(  ".word 0xf797f000	@ pldw	[r7, r0]")
-	TEST_SUPPORTED(  ".word 0xf798f18c	@ pldw	[r8, r12, lsl #3]");
+	TEST_SUPPORTED(  __inst_arm(0xf590f000) "	@ pldw [r0, #0]")
+	TEST_SUPPORTED(  __inst_arm(0xf797f000) "	@ pldw	[r7, r0]")
+	TEST_SUPPORTED(  __inst_arm(0xf798f18c) "	@ pldw	[r8, r12, lsl #3]");
 #endif
 
 #if __LINUX_ARM_ARCH__ >= 7
diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c
index 5d8b85792222..844dd10d8593 100644
--- a/arch/arm/kernel/kprobes-test-thumb.c
+++ b/arch/arm/kernel/kprobes-test-thumb.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <asm/opcodes.h>
 
 #include "kprobes-test.h"
 
@@ -119,7 +120,7 @@ void kprobe_thumb16_test_cases(void)
 	TEST_R(   "add	sp"        ", r",8,-8,  "")
 	TEST_R(   "add	r",14,VAL1,", pc")
 	TEST_BF_R("add	pc"        ", r",0,2f-1f-8,"")
-	TEST_UNSUPPORTED(".short 0x44ff	@ add pc, pc")
+	TEST_UNSUPPORTED(__inst_thumb16(0x44ff) "	@ add pc, pc")
 
 	TEST_RR(  "cmp	r",3,VAL1,", r",8,VAL2,"")
 	TEST_RR(  "cmp	r",8,VAL2,", r",0,VAL1,"")
@@ -150,7 +151,7 @@ void kprobe_thumb16_test_cases(void)
 
 	TEST_BF_R("blx	r",0, 2f+1,"")
 	TEST_BB_R("blx	r",14,2f+1,"")
-	TEST_UNSUPPORTED(".short 0x47f8	@ blx pc")
+	TEST_UNSUPPORTED(__inst_thumb16(0x47f8) "	@ blx pc")
 
 	TEST_GROUP("Load from Literal Pool")
 
@@ -237,8 +238,8 @@ DONT_TEST_IN_ITBLOCK(
 	TEST_R("rev	r7, r",0, VAL2,"")
 	TEST_R("rev16	r0, r",7, VAL1,"")
 	TEST_R("rev16	r7, r",0, VAL2,"")
-	TEST_UNSUPPORTED(".short 0xba80")
-	TEST_UNSUPPORTED(".short 0xbabf")
+	TEST_UNSUPPORTED(__inst_thumb16(0xba80) "")
+	TEST_UNSUPPORTED(__inst_thumb16(0xbabf) "")
 	TEST_R("revsh	r0, r",7, VAL1,"")
 	TEST_R("revsh	r7, r",0, VAL2,"")
 
@@ -272,8 +273,8 @@ DONT_TEST_IN_ITBLOCK(
 	TEST("nop")
 	TEST("wfi")
 	TEST_SUPPORTED("wfe")
-	TEST_UNSUPPORTED(".short 0xbf50") /* Unassigned hints */
-	TEST_UNSUPPORTED(".short 0xbff0") /* Unassigned hints */
+	TEST_UNSUPPORTED(__inst_thumb16(0xbf50) "") /* Unassigned hints */
+	TEST_UNSUPPORTED(__inst_thumb16(0xbff0) "") /* Unassigned hints */
 
 #define TEST_IT(code, code2)			\
 	TESTCASE_START(code)			\
@@ -310,8 +311,8 @@ CONDITION_INSTRUCTIONS(8,
 	TEST_BF("bgt	2f")
 	TEST_BB("blt	2b")
 )
-	TEST_UNSUPPORTED(".short 0xde00")
-	TEST_UNSUPPORTED(".short 0xdeff")
+	TEST_UNSUPPORTED(__inst_thumb16(0xde00) "")
+	TEST_UNSUPPORTED(__inst_thumb16(0xdeff) "")
 	TEST_UNSUPPORTED("svc	#0x00")
 	TEST_UNSUPPORTED("svc	#0xff")
 
@@ -380,13 +381,13 @@ void kprobe_thumb32_test_cases(void)
 	TEST_THUMB_TO_ARM_INTERWORK_P("ldmia	r",0,14*4,", {r12,pc}")
 	TEST_THUMB_TO_ARM_INTERWORK_P("ldmia	r",13,2*4,", {r0-r12,pc}")
 
-	TEST_UNSUPPORTED(".short 0xe88f,0x0101	@ stmia	pc, {r0,r8}")
-	TEST_UNSUPPORTED(".short 0xe92f,0x5f00	@ stmdb	pc!, {r8-r12,r14}")
-	TEST_UNSUPPORTED(".short 0xe8bd,0xc000	@ ldmia	r13!, {r14,pc}")
-	TEST_UNSUPPORTED(".short 0xe93e,0xc000	@ ldmdb	r14!, {r14,pc}")
-	TEST_UNSUPPORTED(".short 0xe8a7,0x3f00	@ stmia	r7!, {r8-r12,sp}")
-	TEST_UNSUPPORTED(".short 0xe8a7,0x9f00	@ stmia	r7!, {r8-r12,pc}")
-	TEST_UNSUPPORTED(".short 0xe93e,0x2010	@ ldmdb	r14!, {r4,sp}")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe88f0101) "	@ stmia	pc, {r0,r8}")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe92f5f00) "	@ stmdb	pc!, {r8-r12,r14}")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe8bdc000) "	@ ldmia	r13!, {r14,pc}")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe93ec000) "	@ ldmdb	r14!, {r14,pc}")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe8a73f00) "	@ stmia	r7!, {r8-r12,sp}")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe8a79f00) "	@ stmia	r7!, {r8-r12,pc}")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe93e2010) "	@ ldmdb	r14!, {r4,sp}")
 
 	TEST_GROUP("Load/store double or exclusive, table branch")
 
@@ -402,12 +403,12 @@ void kprobe_thumb32_test_cases(void)
 		"3:	.word	"__stringify(VAL1)"	\n\t"
 		"	.word	"__stringify(VAL2))
 
-	TEST_UNSUPPORTED(".short 0xe9ff,0xec04	@ ldrd	r14, r12, [pc, #16]!")
-	TEST_UNSUPPORTED(".short 0xe8ff,0xec04	@ ldrd	r14, r12, [pc], #16")
-	TEST_UNSUPPORTED(".short 0xe9d4,0xd800	@ ldrd	sp, r8, [r4]")
-	TEST_UNSUPPORTED(".short 0xe9d4,0xf800	@ ldrd	pc, r8, [r4]")
-	TEST_UNSUPPORTED(".short 0xe9d4,0x7d00	@ ldrd	r7, sp, [r4]")
-	TEST_UNSUPPORTED(".short 0xe9d4,0x7f00	@ ldrd	r7, pc, [r4]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe9ffec04) "	@ ldrd	r14, r12, [pc, #16]!")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe8ffec04) "	@ ldrd	r14, r12, [pc], #16")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe9d4d800) "	@ ldrd	sp, r8, [r4]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe9d4f800) "	@ ldrd	pc, r8, [r4]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe9d47d00) "	@ ldrd	r7, sp, [r4]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe9d47f00) "	@ ldrd	r7, pc, [r4]")
 
 	TEST_RRP("strd	r",0, VAL1,", r",1, VAL2,", [r",1, 24,", #-16]")
 	TEST_RR( "strd	r",12,VAL2,", r",14,VAL1,", [sp, #16]")
@@ -415,8 +416,8 @@ void kprobe_thumb32_test_cases(void)
 	TEST_RR( "strd	r",14,VAL2,", r",12,VAL1,", [sp, #16]!")
 	TEST_RRP("strd	r",1, VAL1,", r",0, VAL2,", [r",7, 24,"], #16")
 	TEST_RR( "strd	r",7, VAL2,", r",8, VAL1,", [sp], #-16")
-	TEST_UNSUPPORTED(".short 0xe9ef,0xec04	@ strd	r14, r12, [pc, #16]!")
-	TEST_UNSUPPORTED(".short 0xe8ef,0xec04	@ strd	r14, r12, [pc], #16")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe9efec04) "	@ strd	r14, r12, [pc, #16]!")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe8efec04) "	@ strd	r14, r12, [pc], #16")
 
 	TEST_RX("tbb	[pc, r",0, (9f-(1f+4)),"]",
 		"9:			\n\t"
@@ -460,9 +461,9 @@ void kprobe_thumb32_test_cases(void)
 		"3:	mvn	r0, r0	\n\t"
 		"2:	nop		\n\t")
 
-	TEST_UNSUPPORTED(".short 0xe8d1,0xf01f	@ tbh [r1, pc]")
-	TEST_UNSUPPORTED(".short 0xe8d1,0xf01d	@ tbh [r1, sp]")
-	TEST_UNSUPPORTED(".short 0xe8dd,0xf012	@ tbh [sp, r2]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe8d1f01f) "	@ tbh [r1, pc]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe8d1f01d) "	@ tbh [r1, sp]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xe8ddf012) "	@ tbh [sp, r2]")
 
 	TEST_UNSUPPORTED("strexb	r0, r1, [r2]")
 	TEST_UNSUPPORTED("strexh	r0, r1, [r2]")
@@ -540,40 +541,40 @@ void kprobe_thumb32_test_cases(void)
 	TEST_RR("pkhtb	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR("pkhtb	r14,r",12, HH1,", r",10,HH2,", asr #2")
 
-	TEST_UNSUPPORTED(".short 0xea17,0x0f0d	@ tst.w r7, sp")
-	TEST_UNSUPPORTED(".short 0xea17,0x0f0f	@ tst.w r7, pc")
-	TEST_UNSUPPORTED(".short 0xea1d,0x0f07	@ tst.w sp, r7")
-	TEST_UNSUPPORTED(".short 0xea1f,0x0f07	@ tst.w pc, r7")
-	TEST_UNSUPPORTED(".short 0xf01d,0x1f08	@ tst sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf01f,0x1f08	@ tst pc, #0x00080008")
-
-	TEST_UNSUPPORTED(".short 0xea97,0x0f0d	@ teq.w r7, sp")
-	TEST_UNSUPPORTED(".short 0xea97,0x0f0f	@ teq.w r7, pc")
-	TEST_UNSUPPORTED(".short 0xea9d,0x0f07	@ teq.w sp, r7")
-	TEST_UNSUPPORTED(".short 0xea9f,0x0f07	@ teq.w pc, r7")
-	TEST_UNSUPPORTED(".short 0xf09d,0x1f08	@ tst sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf09f,0x1f08	@ tst pc, #0x00080008")
-
-	TEST_UNSUPPORTED(".short 0xeb17,0x0f0d	@ cmn.w r7, sp")
-	TEST_UNSUPPORTED(".short 0xeb17,0x0f0f	@ cmn.w r7, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea170f0d) "	@ tst.w r7, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea170f0f) "	@ tst.w r7, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea1d0f07) "	@ tst.w sp, r7")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea1f0f07) "	@ tst.w pc, r7")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf01d1f08) "	@ tst sp, #0x00080008")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf01f1f08) "	@ tst pc, #0x00080008")
+
+	TEST_UNSUPPORTED(__inst_thumb32(0xea970f0d) "	@ teq.w r7, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea970f0f) "	@ teq.w r7, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea9d0f07) "	@ teq.w sp, r7")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea9f0f07) "	@ teq.w pc, r7")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf09d1f08) "	@ tst sp, #0x00080008")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf09f1f08) "	@ tst pc, #0x00080008")
+
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb170f0d) "	@ cmn.w r7, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb170f0f) "	@ cmn.w r7, pc")
 	TEST_P("cmn.w	sp, r",7,0,"")
-	TEST_UNSUPPORTED(".short 0xeb1f,0x0f07	@ cmn.w pc, r7")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb1f0f07) "	@ cmn.w pc, r7")
 	TEST(  "cmn	sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf11f,0x1f08	@ cmn pc, #0x00080008")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf11f1f08) "	@ cmn pc, #0x00080008")
 
-	TEST_UNSUPPORTED(".short 0xebb7,0x0f0d	@ cmp.w r7, sp")
-	TEST_UNSUPPORTED(".short 0xebb7,0x0f0f	@ cmp.w r7, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xebb70f0d) "	@ cmp.w r7, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xebb70f0f) "	@ cmp.w r7, pc")
 	TEST_P("cmp.w	sp, r",7,0,"")
-	TEST_UNSUPPORTED(".short 0xebbf,0x0f07	@ cmp.w pc, r7")
+	TEST_UNSUPPORTED(__inst_thumb32(0xebbf0f07) "	@ cmp.w pc, r7")
 	TEST(  "cmp	sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf1bf,0x1f08	@ cmp pc, #0x00080008")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf1bf1f08) "	@ cmp pc, #0x00080008")
 
-	TEST_UNSUPPORTED(".short 0xea5f,0x070d	@ movs.w r7, sp")
-	TEST_UNSUPPORTED(".short 0xea5f,0x070f	@ movs.w r7, pc")
-	TEST_UNSUPPORTED(".short 0xea5f,0x0d07	@ movs.w sp, r7")
-	TEST_UNSUPPORTED(".short 0xea4f,0x0f07	@ mov.w  pc, r7")
-	TEST_UNSUPPORTED(".short 0xf04f,0x1d08	@ mov sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf04f,0x1f08	@ mov pc, #0x00080008")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea5f070d) "	@ movs.w r7, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea5f070f) "	@ movs.w r7, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea5f0d07) "	@ movs.w sp, r7")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea4f0f07) "	@ mov.w  pc, r7")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf04f1d08) "	@ mov sp, #0x00080008")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf04f1f08) "	@ mov pc, #0x00080008")
 
 	TEST_R("add.w	r0, sp, r",1, 4,"")
 	TEST_R("adds	r0, sp, r",1, 4,", asl #3")
@@ -581,15 +582,15 @@ void kprobe_thumb32_test_cases(void)
 	TEST_R("add	r0, sp, r",1, 16,", ror #1")
 	TEST_R("add.w	sp, sp, r",1, 4,"")
 	TEST_R("add	sp, sp, r",1, 4,", asl #3")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x1d01	@ add sp, sp, r1, asl #4")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x0d71	@ add sp, sp, r1, ror #1")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb0d1d01) "	@ add sp, sp, r1, asl #4")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb0d0d71) "	@ add sp, sp, r1, ror #1")
 	TEST(  "add.w	r0, sp, #24")
 	TEST(  "add.w	sp, sp, #24")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x0f01	@ add pc, sp, r1")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x000f	@ add r0, sp, pc")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x000d	@ add r0, sp, sp")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x0d0f	@ add sp, sp, pc")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x0d0d	@ add sp, sp, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb0d0f01) "	@ add pc, sp, r1")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb0d000f) "	@ add r0, sp, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb0d000d) "	@ add r0, sp, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb0d0d0f) "	@ add sp, sp, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb0d0d0d) "	@ add sp, sp, sp")
 
 	TEST_R("sub.w	r0, sp, r",1, 4,"")
 	TEST_R("subs	r0, sp, r",1, 4,", asl #3")
@@ -597,54 +598,54 @@ void kprobe_thumb32_test_cases(void)
 	TEST_R("sub	r0, sp, r",1, 16,", ror #1")
 	TEST_R("sub.w	sp, sp, r",1, 4,"")
 	TEST_R("sub	sp, sp, r",1, 4,", asl #3")
-	TEST_UNSUPPORTED(".short 0xebad,0x1d01	@ sub sp, sp, r1, asl #4")
-	TEST_UNSUPPORTED(".short 0xebad,0x0d71	@ sub sp, sp, r1, ror #1")
-	TEST_UNSUPPORTED(".short 0xebad,0x0f01	@ sub pc, sp, r1")
+	TEST_UNSUPPORTED(__inst_thumb32(0xebad1d01) "	@ sub sp, sp, r1, asl #4")
+	TEST_UNSUPPORTED(__inst_thumb32(0xebad0d71) "	@ sub sp, sp, r1, ror #1")
+	TEST_UNSUPPORTED(__inst_thumb32(0xebad0f01) "	@ sub pc, sp, r1")
 	TEST(  "sub.w	r0, sp, #24")
 	TEST(  "sub.w	sp, sp, #24")
 
-	TEST_UNSUPPORTED(".short 0xea02,0x010f	@ and r1, r2, pc")
-	TEST_UNSUPPORTED(".short 0xea0f,0x0103	@ and r1, pc, r3")
-	TEST_UNSUPPORTED(".short 0xea02,0x0f03	@ and pc, r2, r3")
-	TEST_UNSUPPORTED(".short 0xea02,0x010d	@ and r1, r2, sp")
-	TEST_UNSUPPORTED(".short 0xea0d,0x0103	@ and r1, sp, r3")
-	TEST_UNSUPPORTED(".short 0xea02,0x0d03	@ and sp, r2, r3")
-	TEST_UNSUPPORTED(".short 0xf00d,0x1108	@ and r1, sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf00f,0x1108	@ and r1, pc, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf002,0x1d08	@ and sp, r8, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf002,0x1f08	@ and pc, r8, #0x00080008")
-
-	TEST_UNSUPPORTED(".short 0xeb02,0x010f	@ add r1, r2, pc")
-	TEST_UNSUPPORTED(".short 0xeb0f,0x0103	@ add r1, pc, r3")
-	TEST_UNSUPPORTED(".short 0xeb02,0x0f03	@ add pc, r2, r3")
-	TEST_UNSUPPORTED(".short 0xeb02,0x010d	@ add r1, r2, sp")
-	TEST_SUPPORTED(  ".short 0xeb0d,0x0103	@ add r1, sp, r3")
-	TEST_UNSUPPORTED(".short 0xeb02,0x0d03	@ add sp, r2, r3")
-	TEST_SUPPORTED(  ".short 0xf10d,0x1108	@ add r1, sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf10d,0x1f08	@ add pc, sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf10f,0x1108	@ add r1, pc, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf102,0x1d08	@ add sp, r8, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf102,0x1f08	@ add pc, r8, #0x00080008")
-
-	TEST_UNSUPPORTED(".short 0xeaa0,0x0000")
-	TEST_UNSUPPORTED(".short 0xeaf0,0x0000")
-	TEST_UNSUPPORTED(".short 0xeb20,0x0000")
-	TEST_UNSUPPORTED(".short 0xeb80,0x0000")
-	TEST_UNSUPPORTED(".short 0xebe0,0x0000")
-
-	TEST_UNSUPPORTED(".short 0xf0a0,0x0000")
-	TEST_UNSUPPORTED(".short 0xf0c0,0x0000")
-	TEST_UNSUPPORTED(".short 0xf0f0,0x0000")
-	TEST_UNSUPPORTED(".short 0xf120,0x0000")
-	TEST_UNSUPPORTED(".short 0xf180,0x0000")
-	TEST_UNSUPPORTED(".short 0xf1e0,0x0000")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea02010f) "	@ and r1, r2, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea0f0103) "	@ and r1, pc, r3")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea020f03) "	@ and pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea02010d) "	@ and r1, r2, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea0d0103) "	@ and r1, sp, r3")
+	TEST_UNSUPPORTED(__inst_thumb32(0xea020d03) "	@ and sp, r2, r3")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf00d1108) "	@ and r1, sp, #0x00080008")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf00f1108) "	@ and r1, pc, #0x00080008")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf0021d08) "	@ and sp, r8, #0x00080008")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf0021f08) "	@ and pc, r8, #0x00080008")
+
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb02010f) "	@ add r1, r2, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb0f0103) "	@ add r1, pc, r3")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb020f03) "	@ add pc, r2, r3")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb02010d) "	@ add r1, r2, sp")
+	TEST_SUPPORTED(  __inst_thumb32(0xeb0d0103) "	@ add r1, sp, r3")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb020d03) "	@ add sp, r2, r3")
+	TEST_SUPPORTED(  __inst_thumb32(0xf10d1108) "	@ add r1, sp, #0x00080008")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf10d1f08) "	@ add pc, sp, #0x00080008")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf10f1108) "	@ add r1, pc, #0x00080008")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf1021d08) "	@ add sp, r8, #0x00080008")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf1021f08) "	@ add pc, r8, #0x00080008")
+
+	TEST_UNSUPPORTED(__inst_thumb32(0xeaa00000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeaf00000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb200000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeb800000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xebe00000) "")
+
+	TEST_UNSUPPORTED(__inst_thumb32(0xf0a00000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf0c00000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf0f00000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf1200000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf1800000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf1e00000) "")
 
 	TEST_GROUP("Coprocessor instructions")
 
-	TEST_UNSUPPORTED(".short 0xec00,0x0000")
-	TEST_UNSUPPORTED(".short 0xeff0,0x0000")
-	TEST_UNSUPPORTED(".short 0xfc00,0x0000")
-	TEST_UNSUPPORTED(".short 0xfff0,0x0000")
+	TEST_UNSUPPORTED(__inst_thumb32(0xec000000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xeff00000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfc000000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfff00000) "")
 
 	TEST_GROUP("Data-processing (plain binary immediate)")
 
@@ -652,92 +653,92 @@ void kprobe_thumb32_test_cases(void)
 	TEST(  "addw	r14, sp, #0xf5a")
 	TEST(  "addw	sp, sp, #0x20")
 	TEST(  "addw	r7,  pc, #0x888")
-	TEST_UNSUPPORTED(".short 0xf20f,0x1f20	@ addw pc, pc, #0x120")
-	TEST_UNSUPPORTED(".short 0xf20d,0x1f20	@ addw pc, sp, #0x120")
-	TEST_UNSUPPORTED(".short 0xf20f,0x1d20	@ addw sp, pc, #0x120")
-	TEST_UNSUPPORTED(".short 0xf200,0x1d20	@ addw sp, r0, #0x120")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf20f1f20) "	@ addw pc, pc, #0x120")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf20d1f20) "	@ addw pc, sp, #0x120")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf20f1d20) "	@ addw sp, pc, #0x120")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf2001d20) "	@ addw sp, r0, #0x120")
 
 	TEST_R("subw	r0,  r",1, VAL1,", #0x123")
 	TEST(  "subw	r14, sp, #0xf5a")
 	TEST(  "subw	sp, sp, #0x20")
 	TEST(  "subw	r7,  pc, #0x888")
-	TEST_UNSUPPORTED(".short 0xf2af,0x1f20	@ subw pc, pc, #0x120")
-	TEST_UNSUPPORTED(".short 0xf2ad,0x1f20	@ subw pc, sp, #0x120")
-	TEST_UNSUPPORTED(".short 0xf2af,0x1d20	@ subw sp, pc, #0x120")
-	TEST_UNSUPPORTED(".short 0xf2a0,0x1d20	@ subw sp, r0, #0x120")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf2af1f20) "	@ subw pc, pc, #0x120")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf2ad1f20) "	@ subw pc, sp, #0x120")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf2af1d20) "	@ subw sp, pc, #0x120")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf2a01d20) "	@ subw sp, r0, #0x120")
 
 	TEST("movw	r0, #0")
 	TEST("movw	r0, #0xffff")
 	TEST("movw	lr, #0xffff")
-	TEST_UNSUPPORTED(".short 0xf240,0x0d00	@ movw sp, #0")
-	TEST_UNSUPPORTED(".short 0xf240,0x0f00	@ movw pc, #0")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf2400d00) "	@ movw sp, #0")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf2400f00) "	@ movw pc, #0")
 
 	TEST_R("movt	r",0, VAL1,", #0")
 	TEST_R("movt	r",0, VAL2,", #0xffff")
 	TEST_R("movt	r",14,VAL1,", #0xffff")
-	TEST_UNSUPPORTED(".short 0xf2c0,0x0d00	@ movt sp, #0")
-	TEST_UNSUPPORTED(".short 0xf2c0,0x0f00	@ movt pc, #0")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf2c00d00) "	@ movt sp, #0")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf2c00f00) "	@ movt pc, #0")
 
 	TEST_R(     "ssat	r0, #24, r",0,   VAL1,"")
 	TEST_R(     "ssat	r14, #24, r",12, VAL2,"")
 	TEST_R(     "ssat	r0, #24, r",0,   VAL1,", lsl #8")
 	TEST_R(     "ssat	r14, #24, r",12, VAL2,", asr #8")
-	TEST_UNSUPPORTED(".short 0xf30c,0x0d17	@ ssat	sp, #24, r12")
-	TEST_UNSUPPORTED(".short 0xf30c,0x0f17	@ ssat	pc, #24, r12")
-	TEST_UNSUPPORTED(".short 0xf30d,0x0c17	@ ssat	r12, #24, sp")
-	TEST_UNSUPPORTED(".short 0xf30f,0x0c17	@ ssat	r12, #24, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf30c0d17) "	@ ssat	sp, #24, r12")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf30c0f17) "	@ ssat	pc, #24, r12")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf30d0c17) "	@ ssat	r12, #24, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf30f0c17) "	@ ssat	r12, #24, pc")
 
 	TEST_R(     "usat	r0, #24, r",0,   VAL1,"")
 	TEST_R(     "usat	r14, #24, r",12, VAL2,"")
 	TEST_R(     "usat	r0, #24, r",0,   VAL1,", lsl #8")
 	TEST_R(     "usat	r14, #24, r",12, VAL2,", asr #8")
-	TEST_UNSUPPORTED(".short 0xf38c,0x0d17	@ usat	sp, #24, r12")
-	TEST_UNSUPPORTED(".short 0xf38c,0x0f17	@ usat	pc, #24, r12")
-	TEST_UNSUPPORTED(".short 0xf38d,0x0c17	@ usat	r12, #24, sp")
-	TEST_UNSUPPORTED(".short 0xf38f,0x0c17	@ usat	r12, #24, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf38c0d17) "	@ usat	sp, #24, r12")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf38c0f17) "	@ usat	pc, #24, r12")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf38d0c17) "	@ usat	r12, #24, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf38f0c17) "	@ usat	r12, #24, pc")
 
 	TEST_R(     "ssat16	r0, #12, r",0,   HH1,"")
 	TEST_R(     "ssat16	r14, #12, r",12, HH2,"")
-	TEST_UNSUPPORTED(".short 0xf32c,0x0d0b	@ ssat16	sp, #12, r12")
-	TEST_UNSUPPORTED(".short 0xf32c,0x0f0b	@ ssat16	pc, #12, r12")
-	TEST_UNSUPPORTED(".short 0xf32d,0x0c0b	@ ssat16	r12, #12, sp")
-	TEST_UNSUPPORTED(".short 0xf32f,0x0c0b	@ ssat16	r12, #12, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf32c0d0b) "	@ ssat16	sp, #12, r12")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf32c0f0b) "	@ ssat16	pc, #12, r12")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf32d0c0b) "	@ ssat16	r12, #12, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf32f0c0b) "	@ ssat16	r12, #12, pc")
 
 	TEST_R(     "usat16	r0, #12, r",0,   HH1,"")
 	TEST_R(     "usat16	r14, #12, r",12, HH2,"")
-	TEST_UNSUPPORTED(".short 0xf3ac,0x0d0b	@ usat16	sp, #12, r12")
-	TEST_UNSUPPORTED(".short 0xf3ac,0x0f0b	@ usat16	pc, #12, r12")
-	TEST_UNSUPPORTED(".short 0xf3ad,0x0c0b	@ usat16	r12, #12, sp")
-	TEST_UNSUPPORTED(".short 0xf3af,0x0c0b	@ usat16	r12, #12, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf3ac0d0b) "	@ usat16	sp, #12, r12")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf3ac0f0b) "	@ usat16	pc, #12, r12")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf3ad0c0b) "	@ usat16	r12, #12, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf3af0c0b) "	@ usat16	r12, #12, pc")
 
 	TEST_R(     "sbfx	r0, r",0  , VAL1,", #0, #31")
 	TEST_R(     "sbfx	r14, r",12, VAL2,", #8, #16")
 	TEST_R(     "sbfx	r4, r",10,  VAL1,", #16, #15")
-	TEST_UNSUPPORTED(".short 0xf34c,0x2d0f	@ sbfx	sp, r12, #8, #16")
-	TEST_UNSUPPORTED(".short 0xf34c,0x2f0f	@ sbfx	pc, r12, #8, #16")
-	TEST_UNSUPPORTED(".short 0xf34d,0x2c0f	@ sbfx	r12, sp, #8, #16")
-	TEST_UNSUPPORTED(".short 0xf34f,0x2c0f	@ sbfx	r12, pc, #8, #16")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf34c2d0f) "	@ sbfx	sp, r12, #8, #16")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf34c2f0f) "	@ sbfx	pc, r12, #8, #16")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf34d2c0f) "	@ sbfx	r12, sp, #8, #16")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf34f2c0f) "	@ sbfx	r12, pc, #8, #16")
 
 	TEST_R(     "ubfx	r0, r",0  , VAL1,", #0, #31")
 	TEST_R(     "ubfx	r14, r",12, VAL2,", #8, #16")
 	TEST_R(     "ubfx	r4, r",10,  VAL1,", #16, #15")
-	TEST_UNSUPPORTED(".short 0xf3cc,0x2d0f	@ ubfx	sp, r12, #8, #16")
-	TEST_UNSUPPORTED(".short 0xf3cc,0x2f0f	@ ubfx	pc, r12, #8, #16")
-	TEST_UNSUPPORTED(".short 0xf3cd,0x2c0f	@ ubfx	r12, sp, #8, #16")
-	TEST_UNSUPPORTED(".short 0xf3cf,0x2c0f	@ ubfx	r12, pc, #8, #16")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf3cc2d0f) "	@ ubfx	sp, r12, #8, #16")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf3cc2f0f) "	@ ubfx	pc, r12, #8, #16")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf3cd2c0f) "	@ ubfx	r12, sp, #8, #16")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf3cf2c0f) "	@ ubfx	r12, pc, #8, #16")
 
 	TEST_R(     "bfc	r",0, VAL1,", #4, #20")
 	TEST_R(     "bfc	r",14,VAL2,", #4, #20")
 	TEST_R(     "bfc	r",7, VAL1,", #0, #31")
 	TEST_R(     "bfc	r",8, VAL2,", #0, #31")
-	TEST_UNSUPPORTED(".short 0xf36f,0x0d1e	@ bfc	sp, #0, #31")
-	TEST_UNSUPPORTED(".short 0xf36f,0x0f1e	@ bfc	pc, #0, #31")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf36f0d1e) "	@ bfc	sp, #0, #31")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf36f0f1e) "	@ bfc	pc, #0, #31")
 
 	TEST_RR(    "bfi	r",0, VAL1,", r",0  , VAL2,", #0, #31")
 	TEST_RR(    "bfi	r",12,VAL1,", r",14 , VAL2,", #4, #20")
-	TEST_UNSUPPORTED(".short 0xf36e,0x1d17	@ bfi	sp, r14, #4, #20")
-	TEST_UNSUPPORTED(".short 0xf36e,0x1f17	@ bfi	pc, r14, #4, #20")
-	TEST_UNSUPPORTED(".short 0xf36d,0x1e17	@ bfi	r14, sp, #4, #20")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf36e1d17) "	@ bfi	sp, r14, #4, #20")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf36e1f17) "	@ bfi	pc, r14, #4, #20")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf36d1e17) "	@ bfi	r14, sp, #4, #20")
 
 	TEST_GROUP("Branches and miscellaneous control")
 
@@ -775,14 +776,14 @@ CONDITION_INSTRUCTIONS(22,
 
 	TEST("mrs	r0, cpsr")
 	TEST("mrs	r14, cpsr")
-	TEST_UNSUPPORTED(".short 0xf3ef,0x8d00	@ mrs	sp, spsr")
-	TEST_UNSUPPORTED(".short 0xf3ef,0x8f00	@ mrs	pc, spsr")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf3ef8d00) "	@ mrs	sp, spsr")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf3ef8f00) "	@ mrs	pc, spsr")
 	TEST_UNSUPPORTED("mrs	r0, spsr")
 	TEST_UNSUPPORTED("mrs	lr, spsr")
 
-	TEST_UNSUPPORTED(".short 0xf7f0,0x8000 @ smc #0")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf7f08000) " @ smc #0")
 
-	TEST_UNSUPPORTED(".short 0xf7f0,0xa000 @ undefeined")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf7f0a000) " @ undefeined")
 
 	TEST_BF(  "b.w	2f")
 	TEST_BB(  "b.w	2b")
@@ -829,15 +830,15 @@ CONDITION_INSTRUCTIONS(22,
 	SINGLE_STORE("")
 
 	TEST("str	sp, [sp]")
-	TEST_UNSUPPORTED(".short 0xf8cf,0xe000	@ str	r14, [pc]")
-	TEST_UNSUPPORTED(".short 0xf8ce,0xf000	@ str	pc, [r14]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf8cfe000) "	@ str	r14, [pc]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf8cef000) "	@ str	pc, [r14]")
 
 	TEST_GROUP("Advanced SIMD element or structure load/store instructions")
 
-	TEST_UNSUPPORTED(".short 0xf900,0x0000")
-	TEST_UNSUPPORTED(".short 0xf92f,0xffff")
-	TEST_UNSUPPORTED(".short 0xf980,0x0000")
-	TEST_UNSUPPORTED(".short 0xf9ef,0xffff")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf9000000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf92fffff) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf9800000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf9efffff) "")
 
 	TEST_GROUP("Load single data item and memory hints")
 
@@ -881,20 +882,20 @@ CONDITION_INSTRUCTIONS(22,
 	TEST_SUPPORTED("ldr	sp, 99f")
 	TEST_SUPPORTED("ldr	pc, 99f")
 
-	TEST_UNSUPPORTED(".short 0xf854,0x700d	@ ldr	r7, [r4, sp]")
-	TEST_UNSUPPORTED(".short 0xf854,0x700f	@ ldr	r7, [r4, pc]")
-	TEST_UNSUPPORTED(".short 0xf814,0x700d	@ ldrb	r7, [r4, sp]")
-	TEST_UNSUPPORTED(".short 0xf814,0x700f	@ ldrb	r7, [r4, pc]")
-	TEST_UNSUPPORTED(".short 0xf89f,0xd004	@ ldrb	sp, 99f")
-	TEST_UNSUPPORTED(".short 0xf814,0xd008	@ ldrb	sp, [r4, r8]")
-	TEST_UNSUPPORTED(".short 0xf894,0xd000	@ ldrb	sp, [r4]")
-
-	TEST_UNSUPPORTED(".short 0xf860,0x0000") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xf9ff,0xffff") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xf950,0x0000") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xf95f,0xffff") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xf800,0x0800") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xf97f,0xfaff") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xf854700d) "	@ ldr	r7, [r4, sp]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf854700f) "	@ ldr	r7, [r4, pc]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf814700d) "	@ ldrb	r7, [r4, sp]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf814700f) "	@ ldrb	r7, [r4, pc]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf89fd004) "	@ ldrb	sp, 99f")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf814d008) "	@ ldrb	sp, [r4, r8]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf894d000) "	@ ldrb	sp, [r4]")
+
+	TEST_UNSUPPORTED(__inst_thumb32(0xf8600000) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xf9ffffff) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xf9500000) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xf95fffff) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xf8000800) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xf97ffaff) "") /* Unallocated space */
 
 	TEST(   "pli	[pc, #4]")
 	TEST(   "pli	[pc, #-4]")
@@ -902,22 +903,22 @@ CONDITION_INSTRUCTIONS(22,
 	TEST(   "pld	[pc, #-4]")
 
 	TEST_P( "pld	[r",0,-1024,", #1024]")
-	TEST(   ".short 0xf8b0,0xf400	@ pldw	[r0, #1024]")
+	TEST(   __inst_thumb32(0xf8b0f400) "	@ pldw	[r0, #1024]")
 	TEST_P( "pli	[r",4, 0b,", #1024]")
 	TEST_P( "pld	[r",7, 120,", #-120]")
-	TEST(   ".short 0xf837,0xfc78	@ pldw	[r7, #-120]")
+	TEST(   __inst_thumb32(0xf837fc78) "	@ pldw	[r7, #-120]")
 	TEST_P( "pli	[r",11,120,", #-120]")
 	TEST(   "pld	[sp, #0]")
 
 	TEST_PR("pld	[r",7, 24, ", r",0, 16,"]")
 	TEST_PR("pld	[r",8, 24, ", r",12,16,", lsl #3]")
-	TEST_SUPPORTED(".short 0xf837,0xf000	@ pldw	[r7, r0]")
-	TEST_SUPPORTED(".short 0xf838,0xf03c	@ pldw	[r8, r12, lsl #3]");
+	TEST_SUPPORTED(__inst_thumb32(0xf837f000) "	@ pldw	[r7, r0]")
+	TEST_SUPPORTED(__inst_thumb32(0xf838f03c) "	@ pldw	[r8, r12, lsl #3]");
 	TEST_RR("pli	[r",12,0b,", r",0, 16,"]")
 	TEST_RR("pli	[r",0, 0b,", r",12,16,", lsl #3]")
 	TEST_R( "pld	[sp, r",1, 16,"]")
-	TEST_UNSUPPORTED(".short 0xf817,0xf00d  @pld	[r7, sp]")
-	TEST_UNSUPPORTED(".short 0xf817,0xf00f  @pld	[r7, pc]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf817f00d) "  @pld	[r7, sp]")
+	TEST_UNSUPPORTED(__inst_thumb32(0xf817f00f) "  @pld	[r7, pc]")
 
 	TEST_GROUP("Data-processing (register)")
 
@@ -934,21 +935,21 @@ CONDITION_INSTRUCTIONS(22,
 	SHIFTS32("ror")
 	SHIFTS32("rors")
 
-	TEST_UNSUPPORTED(".short 0xfa01,0xff02	@ lsl	pc, r1, r2")
-	TEST_UNSUPPORTED(".short 0xfa01,0xfd02	@ lsl	sp, r1, r2")
-	TEST_UNSUPPORTED(".short 0xfa0f,0xf002	@ lsl	r0, pc, r2")
-	TEST_UNSUPPORTED(".short 0xfa0d,0xf002	@ lsl	r0, sp, r2")
-	TEST_UNSUPPORTED(".short 0xfa01,0xf00f	@ lsl	r0, r1, pc")
-	TEST_UNSUPPORTED(".short 0xfa01,0xf00d	@ lsl	r0, r1, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa01ff02) "	@ lsl	pc, r1, r2")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa01fd02) "	@ lsl	sp, r1, r2")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa0ff002) "	@ lsl	r0, pc, r2")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa0df002) "	@ lsl	r0, sp, r2")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa01f00f) "	@ lsl	r0, r1, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa01f00d) "	@ lsl	r0, r1, sp")
 
 	TEST_RR(    "sxtah	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "sxtah	r14,r",12, HH2,", r",10,HH1,", ror #8")
 	TEST_R(     "sxth	r8, r",7,  HH1,"")
 
-	TEST_UNSUPPORTED(".short 0xfa0f,0xff87	@ sxth	pc, r7");
-	TEST_UNSUPPORTED(".short 0xfa0f,0xfd87	@ sxth	sp, r7");
-	TEST_UNSUPPORTED(".short 0xfa0f,0xf88f	@ sxth	r8, pc");
-	TEST_UNSUPPORTED(".short 0xfa0f,0xf88d	@ sxth	r8, sp");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa0fff87) "	@ sxth	pc, r7");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa0ffd87) "	@ sxth	sp, r7");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa0ff88f) "	@ sxth	r8, pc");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa0ff88d) "	@ sxth	r8, sp");
 
 	TEST_RR(    "uxtah	r0, r",0,  HH1,", r",1, HH2,"")
 	TEST_RR(    "uxtah	r14,r",12, HH2,", r",10,HH1,", ror #8")
@@ -970,8 +971,8 @@ CONDITION_INSTRUCTIONS(22,
 	TEST_RR(    "uxtab	r14,r",12, HH2,", r",10,HH1,", ror #8")
 	TEST_R(     "uxtb	r8, r",7,  HH1,"")
 
-	TEST_UNSUPPORTED(".short 0xfa60,0x00f0")
-	TEST_UNSUPPORTED(".short 0xfa7f,0xffff")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa6000f0) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa7fffff) "")
 
 #define PARALLEL_ADD_SUB(op)					\
 	TEST_RR(  op"add16	r0, r",0,  HH1,", r",1, HH2,"")	\
@@ -1019,10 +1020,10 @@ CONDITION_INSTRUCTIONS(22,
 	TEST_R("revsh.w	r0, r",0,   VAL1,"")
 	TEST_R("revsh	r14, r",12, VAL2,"")
 
-	TEST_UNSUPPORTED(".short 0xfa9c,0xff8c	@ rev	pc, r12");
-	TEST_UNSUPPORTED(".short 0xfa9c,0xfd8c	@ rev	sp, r12");
-	TEST_UNSUPPORTED(".short 0xfa9f,0xfe8f	@ rev	r14, pc");
-	TEST_UNSUPPORTED(".short 0xfa9d,0xfe8d	@ rev	r14, sp");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa9cff8c) "	@ rev	pc, r12");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa9cfd8c) "	@ rev	sp, r12");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa9ffe8f) "	@ rev	r14, pc");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa9dfe8d) "	@ rev	r14, sp");
 
 	TEST_RR("sel	r0, r",0,  VAL1,", r",1, VAL2,"")
 	TEST_RR("sel	r14, r",12,VAL1,", r",10, VAL2,"")
@@ -1031,31 +1032,31 @@ CONDITION_INSTRUCTIONS(22,
 	TEST_R("clz	r7, r",14,0x1,"")
 	TEST_R("clz	lr, r",7, 0xffffffff,"")
 
-	TEST_UNSUPPORTED(".short 0xfa80,0xf030") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfab0,0xf000") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xfa80f030) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xfaffff7f) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xfab0f000) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xfaffff7f) "") /* Unallocated space */
 
 	TEST_GROUP("Multiply, multiply accumulate, and absolute difference operations")
 
 	TEST_RR(    "mul	r0, r",1, VAL1,", r",2, VAL2,"")
 	TEST_RR(    "mul	r7, r",8, VAL2,", r",9, VAL2,"")
-	TEST_UNSUPPORTED(".short 0xfb08,0xff09	@ mul	pc, r8, r9")
-	TEST_UNSUPPORTED(".short 0xfb08,0xfd09	@ mul	sp, r8, r9")
-	TEST_UNSUPPORTED(".short 0xfb0f,0xf709	@ mul	r7, pc, r9")
-	TEST_UNSUPPORTED(".short 0xfb0d,0xf709	@ mul	r7, sp, r9")
-	TEST_UNSUPPORTED(".short 0xfb08,0xf70f	@ mul	r7, r8, pc")
-	TEST_UNSUPPORTED(".short 0xfb08,0xf70d	@ mul	r7, r8, sp")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb08ff09) "	@ mul	pc, r8, r9")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb08fd09) "	@ mul	sp, r8, r9")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb0ff709) "	@ mul	r7, pc, r9")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb0df709) "	@ mul	r7, sp, r9")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb08f70f) "	@ mul	r7, r8, pc")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb08f70d) "	@ mul	r7, r8, sp")
 
 	TEST_RRR(   "mla	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(   "mla	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_UNSUPPORTED(".short 0xfb08,0xaf09	@ mla	pc, r8, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb08,0xad09	@ mla	sp, r8, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb0f,0xa709	@ mla	r7, pc, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb0d,0xa709	@ mla	r7, sp, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb08,0xa70f	@ mla	r7, r8, pc, r10");
-	TEST_UNSUPPORTED(".short 0xfb08,0xa70d	@ mla	r7, r8, sp, r10");
-	TEST_UNSUPPORTED(".short 0xfb08,0xd709	@ mla	r7, r8, r9, sp");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb08af09) "	@ mla	pc, r8, r9, r10");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb08ad09) "	@ mla	sp, r8, r9, r10");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb0fa709) "	@ mla	r7, pc, r9, r10");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb0da709) "	@ mla	r7, sp, r9, r10");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb08a70f) "	@ mla	r7, r8, pc, r10");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb08a70d) "	@ mla	r7, r8, sp, r10");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb08d709) "	@ mla	r7, r8, r9, sp");
 
 	TEST_RRR(   "mls	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
 	TEST_RRR(   "mls	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
@@ -1123,25 +1124,25 @@ CONDITION_INSTRUCTIONS(22,
 	TEST_RR(    "usad8	r0, r",0,  VAL1,", r",1, VAL2,"")
 	TEST_RR(    "usad8	r14, r",12,VAL2,", r",10,VAL1,"")
 
-	TEST_UNSUPPORTED(".short 0xfb00,0xf010") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfb0f,0xff1f") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfb70,0xf010") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfb70,0x0010") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb00f010) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb0fff1f) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb70f010) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb7fff1f) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb700010) "") /* Unallocated space */
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb7fff1f) "") /* Unallocated space */
 
 	TEST_GROUP("Long multiply, long multiply accumulate, and divide")
 
 	TEST_RR(   "smull	r0, r1, r",2, VAL1,", r",3, VAL2,"")
 	TEST_RR(   "smull	r7, r8, r",9, VAL2,", r",10, VAL1,"")
-	TEST_UNSUPPORTED(".short 0xfb89,0xf80a	@ smull	pc, r8, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb89,0xd80a	@ smull	sp, r8, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb89,0x7f0a	@ smull	r7, pc, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb89,0x7d0a	@ smull	r7, sp, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb8f,0x780a	@ smull	r7, r8, pc, r10");
-	TEST_UNSUPPORTED(".short 0xfb8d,0x780a	@ smull	r7, r8, sp, r10");
-	TEST_UNSUPPORTED(".short 0xfb89,0x780f	@ smull	r7, r8, r9, pc");
-	TEST_UNSUPPORTED(".short 0xfb89,0x780d	@ smull	r7, r8, r9, sp");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb89f80a) "	@ smull	pc, r8, r9, r10");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb89d80a) "	@ smull	sp, r8, r9, r10");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb897f0a) "	@ smull	r7, pc, r9, r10");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb897d0a) "	@ smull	r7, sp, r9, r10");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb8f780a) "	@ smull	r7, r8, pc, r10");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb8d780a) "	@ smull	r7, r8, sp, r10");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb89780f) "	@ smull	r7, r8, r9, pc");
+	TEST_UNSUPPORTED(__inst_thumb32(0xfb89780d) "	@ smull	r7, r8, r9, sp");
 
 	TEST_RR(   "umull	r0, r1, r",2, VAL1,", r",3, VAL2,"")
 	TEST_RR(   "umull	r7, r8, r",9, VAL2,", r",10, VAL1,"")
@@ -1175,8 +1176,8 @@ CONDITION_INSTRUCTIONS(22,
 
 	TEST_GROUP("Coprocessor instructions")
 
-	TEST_UNSUPPORTED(".short 0xfc00,0x0000")
-	TEST_UNSUPPORTED(".short 0xffff,0xffff")
+	TEST_UNSUPPORTED(__inst_thumb32(0xfc000000) "")
+	TEST_UNSUPPORTED(__inst_thumb32(0xffffffff) "")
 
 	TEST_GROUP("Testing instructions in IT blocks")
 
diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c
index 0cd63d080c7b..379639998d5a 100644
--- a/arch/arm/kernel/kprobes-test.c
+++ b/arch/arm/kernel/kprobes-test.c
@@ -113,7 +113,7 @@
  *	@ start of inline data...
  *	.ascii "mov r0, r7"	@ text title for test case
  *	.byte	0
- *	.align	2
+ *	.align	2, 0
  *
  *	@ TEST_ARG_REG
  *	.byte	ARG_TYPE_REG
@@ -201,10 +201,14 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/kprobes.h>
-
+#include <linux/errno.h>
+#include <linux/stddef.h>
+#include <linux/bug.h>
 #include <asm/opcodes.h>
 
 #include "kprobes.h"
+#include "probes-arm.h"
+#include "probes-thumb.h"
 #include "kprobes-test.h"
 
 
@@ -1329,7 +1333,8 @@ static void test_case_failed(const char *message)
 static unsigned long next_instruction(unsigned long pc)
 {
 #ifdef CONFIG_THUMB2_KERNEL
-	if ((pc & 1) && !is_wide_instruction(*(u16 *)(pc - 1)))
+	if ((pc & 1) &&
+	    !is_wide_instruction(__mem_to_opcode_thumb16(*(u16 *)(pc - 1))))
 		return pc + 2;
 	else
 #endif
@@ -1374,13 +1379,13 @@ static uintptr_t __used kprobes_test_case_start(const char *title, void *stack)
 
 	if (test_case_is_thumb) {
 		u16 *p = (u16 *)(test_code & ~1);
-		current_instruction = p[0];
+		current_instruction = __mem_to_opcode_thumb16(p[0]);
 		if (is_wide_instruction(current_instruction)) {
-			current_instruction <<= 16;
-			current_instruction |= p[1];
+			u16 instr2 = __mem_to_opcode_thumb16(p[1]);
+			current_instruction = __opcode_thumb32_compose(current_instruction, instr2);
 		}
 	} else {
-		current_instruction = *(u32 *)test_code;
+		current_instruction = __mem_to_opcode_arm(*(u32 *)test_code);
 	}
 
 	if (current_title[0] == '.')
@@ -1608,7 +1613,7 @@ static int __init run_all_tests(void)
 		goto out;
 
 	pr_info("ARM instruction simulation\n");
-	ret = run_test_cases(kprobe_arm_test_cases, kprobe_decode_arm_table);
+	ret = run_test_cases(kprobe_arm_test_cases, probes_decode_arm_table);
 	if (ret)
 		goto out;
 
@@ -1631,13 +1636,13 @@ static int __init run_all_tests(void)
 
 	pr_info("16-bit Thumb instruction simulation\n");
 	ret = run_test_cases(kprobe_thumb16_test_cases,
-				kprobe_decode_thumb16_table);
+				probes_decode_thumb16_table);
 	if (ret)
 		goto out;
 
 	pr_info("32-bit Thumb instruction simulation\n");
 	ret = run_test_cases(kprobe_thumb32_test_cases,
-				kprobe_decode_thumb32_table);
+				probes_decode_thumb32_table);
 	if (ret)
 		goto out;
 #endif
diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h
index e28a869b1ae4..eecc90a0fd91 100644
--- a/arch/arm/kernel/kprobes-test.h
+++ b/arch/arm/kernel/kprobes-test.h
@@ -115,7 +115,7 @@ struct test_arg_end {
 	/* multiple strings to be concatenated.  */		\
 	".ascii "#title"				\n\t"	\
 	".byte	0					\n\t"	\
-	".align	2					\n\t"
+	".align	2, 0					\n\t"
 
 #define	TEST_ARG_REG(reg, val)					\
 	".byte	"__stringify(ARG_TYPE_REG)"		\n\t"	\
diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c
index 6123daf397a7..9495d7f3516f 100644
--- a/arch/arm/kernel/kprobes-thumb.c
+++ b/arch/arm/kernel/kprobes-thumb.c
@@ -8,41 +8,25 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/ptrace.h>
 #include <linux/kprobes.h>
-#include <linux/module.h>
 
 #include "kprobes.h"
+#include "probes-thumb.h"
 
+/* These emulation encodings are functionally equivalent... */
+#define t32_emulate_rd8rn16rm0ra12_noflags \
+		t32_emulate_rdlo12rdhi8rn16rm0_noflags
 
-/*
- * True if current instruction is in an IT block.
- */
-#define in_it_block(cpsr)	((cpsr & 0x06000c00) != 0x00000000)
-
-/*
- * Return the condition code to check for the currently executing instruction.
- * This is in ITSTATE<7:4> which is in CPSR<15:12> but is only valid if
- * in_it_block returns true.
- */
-#define current_cond(cpsr)	((cpsr >> 12) & 0xf)
-
-/*
- * Return the PC value for a probe in thumb code.
- * This is the address of the probed instruction plus 4.
- * We subtract one because the address will have bit zero set to indicate
- * a pointer to thumb code.
- */
-static inline unsigned long __kprobes thumb_probe_pc(struct kprobe *p)
-{
-	return (unsigned long)p->addr - 1 + 4;
-}
+/* t32 thumb actions */
 
 static void __kprobes
-t32_simulate_table_branch(struct kprobe *p, struct pt_regs *regs)
+t32_simulate_table_branch(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
+	unsigned long pc = regs->ARM_pc;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;
 
@@ -59,19 +43,19 @@ t32_simulate_table_branch(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-t32_simulate_mrs(struct kprobe *p, struct pt_regs *regs)
+t32_simulate_mrs(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	int rd = (insn >> 8) & 0xf;
 	unsigned long mask = 0xf8ff03df; /* Mask out execution state */
 	regs->uregs[rd] = regs->ARM_cpsr & mask;
 }
 
 static void __kprobes
-t32_simulate_cond_branch(struct kprobe *p, struct pt_regs *regs)
+t32_simulate_cond_branch(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
+	unsigned long pc = regs->ARM_pc;
 
 	long offset = insn & 0x7ff;		/* imm11 */
 	offset += (insn & 0x003f0000) >> 5;	/* imm6 */
@@ -82,20 +66,21 @@ t32_simulate_cond_branch(struct kprobe *p, struct pt_regs *regs)
 	regs->ARM_pc = pc + (offset * 2);
 }
 
-static enum kprobe_insn __kprobes
-t32_decode_cond_branch(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+static enum probes_insn __kprobes
+t32_decode_cond_branch(probes_opcode_t insn, struct arch_probes_insn *asi,
+		const struct decode_header *d)
 {
 	int cc = (insn >> 22) & 0xf;
-	asi->insn_check_cc = kprobe_condition_checks[cc];
+	asi->insn_check_cc = probes_condition_checks[cc];
 	asi->insn_handler = t32_simulate_cond_branch;
 	return INSN_GOOD_NO_SLOT;
 }
 
 static void __kprobes
-t32_simulate_branch(struct kprobe *p, struct pt_regs *regs)
+t32_simulate_branch(probes_opcode_t insn,
+		    struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
+	unsigned long pc = regs->ARM_pc;
 
 	long offset = insn & 0x7ff;		/* imm11 */
 	offset += (insn & 0x03ff0000) >> 5;	/* imm10 */
@@ -108,7 +93,7 @@ t32_simulate_branch(struct kprobe *p, struct pt_regs *regs)
 
 	if (insn & (1 << 14)) {
 		/* BL or BLX */
-		regs->ARM_lr = (unsigned long)p->addr + 4;
+		regs->ARM_lr = regs->ARM_pc | 1;
 		if (!(insn & (1 << 12))) {
 			/* BLX so switch to ARM mode */
 			regs->ARM_cpsr &= ~PSR_T_BIT;
@@ -120,10 +105,10 @@ t32_simulate_branch(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-t32_simulate_ldr_literal(struct kprobe *p, struct pt_regs *regs)
+t32_simulate_ldr_literal(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long addr = thumb_probe_pc(p) & ~3;
+	unsigned long addr = regs->ARM_pc & ~3;
 	int rt = (insn >> 12) & 0xf;
 	unsigned long rtv;
 
@@ -157,24 +142,25 @@ t32_simulate_ldr_literal(struct kprobe *p, struct pt_regs *regs)
 	regs->uregs[rt] = rtv;
 }
 
-static enum kprobe_insn __kprobes
-t32_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+static enum probes_insn __kprobes
+t32_decode_ldmstm(probes_opcode_t insn, struct arch_probes_insn *asi,
+		const struct decode_header *d)
 {
-	enum kprobe_insn ret = kprobe_decode_ldmstm(insn, asi);
+	enum probes_insn ret = kprobe_decode_ldmstm(insn, asi, d);
 
 	/* Fixup modified instruction to have halfwords in correct order...*/
-	insn = asi->insn[0];
-	((u16 *)asi->insn)[0] = insn >> 16;
-	((u16 *)asi->insn)[1] = insn & 0xffff;
+	insn = __mem_to_opcode_arm(asi->insn[0]);
+	((u16 *)asi->insn)[0] = __opcode_to_mem_thumb16(insn >> 16);
+	((u16 *)asi->insn)[1] = __opcode_to_mem_thumb16(insn & 0xffff);
 
 	return ret;
 }
 
 static void __kprobes
-t32_emulate_ldrdstrd(struct kprobe *p, struct pt_regs *regs)
+t32_emulate_ldrdstrd(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p) & ~3;
+	unsigned long pc = regs->ARM_pc & ~3;
 	int rt1 = (insn >> 12) & 0xf;
 	int rt2 = (insn >> 8) & 0xf;
 	int rn = (insn >> 16) & 0xf;
@@ -187,7 +173,7 @@ t32_emulate_ldrdstrd(struct kprobe *p, struct pt_regs *regs)
 	__asm__ __volatile__ (
 		"blx    %[fn]"
 		: "=r" (rt1v), "=r" (rt2v), "=r" (rnv)
-		: "0" (rt1v), "1" (rt2v), "2" (rnv), [fn] "r" (p->ainsn.insn_fn)
+		: "0" (rt1v), "1" (rt2v), "2" (rnv), [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -198,9 +184,9 @@ t32_emulate_ldrdstrd(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-t32_emulate_ldrstr(struct kprobe *p, struct pt_regs *regs)
+t32_emulate_ldrstr(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	int rt = (insn >> 12) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;
@@ -212,7 +198,7 @@ t32_emulate_ldrstr(struct kprobe *p, struct pt_regs *regs)
 	__asm__ __volatile__ (
 		"blx    %[fn]"
 		: "=r" (rtv), "=r" (rnv)
-		: "0" (rtv), "1" (rnv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn)
+		: "0" (rtv), "1" (rnv), "r" (rmv), [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -224,9 +210,9 @@ t32_emulate_ldrstr(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-t32_emulate_rd8rn16rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+t32_emulate_rd8rn16rm0_rwflags(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	int rd = (insn >> 8) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;
@@ -242,7 +228,7 @@ t32_emulate_rd8rn16rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
 		"mrs	%[cpsr], cpsr		\n\t"
 		: "=r" (rdv), [cpsr] "=r" (cpsr)
 		: "0" (rdv), "r" (rnv), "r" (rmv),
-		  "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
+		  "1" (cpsr), [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -251,10 +237,10 @@ t32_emulate_rd8rn16rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-t32_emulate_rd8pc16_noflags(struct kprobe *p, struct pt_regs *regs)
+t32_emulate_rd8pc16_noflags(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
+	unsigned long pc = regs->ARM_pc;
 	int rd = (insn >> 8) & 0xf;
 
 	register unsigned long rdv asm("r1") = regs->uregs[rd];
@@ -263,7 +249,7 @@ t32_emulate_rd8pc16_noflags(struct kprobe *p, struct pt_regs *regs)
 	__asm__ __volatile__ (
 		"blx    %[fn]"
 		: "=r" (rdv)
-		: "0" (rdv), "r" (rnv), [fn] "r" (p->ainsn.insn_fn)
+		: "0" (rdv), "r" (rnv), [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -271,9 +257,9 @@ t32_emulate_rd8pc16_noflags(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-t32_emulate_rd8rn16_noflags(struct kprobe *p, struct pt_regs *regs)
+t32_emulate_rd8rn16_noflags(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	int rd = (insn >> 8) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 
@@ -283,7 +269,7 @@ t32_emulate_rd8rn16_noflags(struct kprobe *p, struct pt_regs *regs)
 	__asm__ __volatile__ (
 		"blx    %[fn]"
 		: "=r" (rdv)
-		: "0" (rdv), "r" (rnv), [fn] "r" (p->ainsn.insn_fn)
+		: "0" (rdv), "r" (rnv), [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -291,9 +277,10 @@ t32_emulate_rd8rn16_noflags(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-t32_emulate_rdlo12rdhi8rn16rm0_noflags(struct kprobe *p, struct pt_regs *regs)
+t32_emulate_rdlo12rdhi8rn16rm0_noflags(probes_opcode_t insn,
+		struct arch_probes_insn *asi,
+		struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	int rdlo = (insn >> 12) & 0xf;
 	int rdhi = (insn >> 8) & 0xf;
 	int rn = (insn >> 16) & 0xf;
@@ -308,674 +295,43 @@ t32_emulate_rdlo12rdhi8rn16rm0_noflags(struct kprobe *p, struct pt_regs *regs)
 		"blx    %[fn]"
 		: "=r" (rdlov), "=r" (rdhiv)
 		: "0" (rdlov), "1" (rdhiv), "r" (rnv), "r" (rmv),
-		  [fn] "r" (p->ainsn.insn_fn)
+		  [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
 	regs->uregs[rdlo] = rdlov;
 	regs->uregs[rdhi] = rdhiv;
 }
-
-/* These emulation encodings are functionally equivalent... */
-#define t32_emulate_rd8rn16rm0ra12_noflags \
-		t32_emulate_rdlo12rdhi8rn16rm0_noflags
-
-static const union decode_item t32_table_1110_100x_x0xx[] = {
-	/* Load/store multiple instructions */
-
-	/* Rn is PC		1110 100x x0xx 1111 xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfe4f0000, 0xe80f0000),
-
-	/* SRS			1110 1000 00x0 xxxx xxxx xxxx xxxx xxxx */
-	/* RFE			1110 1000 00x1 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xffc00000, 0xe8000000),
-	/* SRS			1110 1001 10x0 xxxx xxxx xxxx xxxx xxxx */
-	/* RFE			1110 1001 10x1 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xffc00000, 0xe9800000),
-
-	/* STM Rn, {...pc}	1110 100x x0x0 xxxx 1xxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfe508000, 0xe8008000),
-	/* LDM Rn, {...lr,pc}	1110 100x x0x1 xxxx 11xx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfe50c000, 0xe810c000),
-	/* LDM/STM Rn, {...sp}	1110 100x x0xx xxxx xx1x xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfe402000, 0xe8002000),
-
-	/* STMIA		1110 1000 10x0 xxxx xxxx xxxx xxxx xxxx */
-	/* LDMIA		1110 1000 10x1 xxxx xxxx xxxx xxxx xxxx */
-	/* STMDB		1110 1001 00x0 xxxx xxxx xxxx xxxx xxxx */
-	/* LDMDB		1110 1001 00x1 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_CUSTOM	(0xfe400000, 0xe8000000, t32_decode_ldmstm),
-
-	DECODE_END
-};
-
-static const union decode_item t32_table_1110_100x_x1xx[] = {
-	/* Load/store dual, load/store exclusive, table branch */
-
-	/* STRD (immediate)	1110 1000 x110 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRD (immediate)	1110 1000 x111 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_OR	(0xff600000, 0xe8600000),
-	/* STRD (immediate)	1110 1001 x1x0 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRD (immediate)	1110 1001 x1x1 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xff400000, 0xe9400000, t32_emulate_ldrdstrd,
-						 REGS(NOPCWB, NOSPPC, NOSPPC, 0, 0)),
-
-	/* TBB			1110 1000 1101 xxxx xxxx xxxx 0000 xxxx */
-	/* TBH			1110 1000 1101 xxxx xxxx xxxx 0001 xxxx */
-	DECODE_SIMULATEX(0xfff000e0, 0xe8d00000, t32_simulate_table_branch,
-						 REGS(NOSP, 0, 0, 0, NOSPPC)),
-
-	/* STREX		1110 1000 0100 xxxx xxxx xxxx xxxx xxxx */
-	/* LDREX		1110 1000 0101 xxxx xxxx xxxx xxxx xxxx */
-	/* STREXB		1110 1000 1100 xxxx xxxx xxxx 0100 xxxx */
-	/* STREXH		1110 1000 1100 xxxx xxxx xxxx 0101 xxxx */
-	/* STREXD		1110 1000 1100 xxxx xxxx xxxx 0111 xxxx */
-	/* LDREXB		1110 1000 1101 xxxx xxxx xxxx 0100 xxxx */
-	/* LDREXH		1110 1000 1101 xxxx xxxx xxxx 0101 xxxx */
-	/* LDREXD		1110 1000 1101 xxxx xxxx xxxx 0111 xxxx */
-	/* And unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item t32_table_1110_101x[] = {
-	/* Data-processing (shifted register)				*/
-
-	/* TST			1110 1010 0001 xxxx xxxx 1111 xxxx xxxx */
-	/* TEQ			1110 1010 1001 xxxx xxxx 1111 xxxx xxxx */
-	DECODE_EMULATEX	(0xff700f00, 0xea100f00, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, 0, 0, NOSPPC)),
-
-	/* CMN			1110 1011 0001 xxxx xxxx 1111 xxxx xxxx */
-	DECODE_OR	(0xfff00f00, 0xeb100f00),
-	/* CMP			1110 1011 1011 xxxx xxxx 1111 xxxx xxxx */
-	DECODE_EMULATEX	(0xfff00f00, 0xebb00f00, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOPC, 0, 0, 0, NOSPPC)),
-
-	/* MOV			1110 1010 010x 1111 xxxx xxxx xxxx xxxx */
-	/* MVN			1110 1010 011x 1111 xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xffcf0000, 0xea4f0000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(0, 0, NOSPPC, 0, NOSPPC)),
-
-	/* ???			1110 1010 101x xxxx xxxx xxxx xxxx xxxx */
-	/* ???			1110 1010 111x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xffa00000, 0xeaa00000),
-	/* ???			1110 1011 001x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xffe00000, 0xeb200000),
-	/* ???			1110 1011 100x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xffe00000, 0xeb800000),
-	/* ???			1110 1011 111x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xffe00000, 0xebe00000),
-
-	/* ADD/SUB SP, SP, Rm, LSL #0..3				*/
-	/*			1110 1011 x0xx 1101 x000 1101 xx00 xxxx */
-	DECODE_EMULATEX	(0xff4f7f30, 0xeb0d0d00, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(SP, 0, SP, 0, NOSPPC)),
-
-	/* ADD/SUB SP, SP, Rm, shift					*/
-	/*			1110 1011 x0xx 1101 xxxx 1101 xxxx xxxx */
-	DECODE_REJECT	(0xff4f0f00, 0xeb0d0d00),
-
-	/* ADD/SUB Rd, SP, Rm, shift					*/
-	/*			1110 1011 x0xx 1101 xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xff4f0000, 0xeb0d0000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(SP, 0, NOPC, 0, NOSPPC)),
-
-	/* AND			1110 1010 000x xxxx xxxx xxxx xxxx xxxx */
-	/* BIC			1110 1010 001x xxxx xxxx xxxx xxxx xxxx */
-	/* ORR			1110 1010 010x xxxx xxxx xxxx xxxx xxxx */
-	/* ORN			1110 1010 011x xxxx xxxx xxxx xxxx xxxx */
-	/* EOR			1110 1010 100x xxxx xxxx xxxx xxxx xxxx */
-	/* PKH			1110 1010 110x xxxx xxxx xxxx xxxx xxxx */
-	/* ADD			1110 1011 000x xxxx xxxx xxxx xxxx xxxx */
-	/* ADC			1110 1011 010x xxxx xxxx xxxx xxxx xxxx */
-	/* SBC			1110 1011 011x xxxx xxxx xxxx xxxx xxxx */
-	/* SUB			1110 1011 101x xxxx xxxx xxxx xxxx xxxx */
-	/* RSB			1110 1011 110x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfe000000, 0xea000000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)),
-
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_0x0x___0[] = {
-	/* Data-processing (modified immediate)				*/
-
-	/* TST			1111 0x00 0001 xxxx 0xxx 1111 xxxx xxxx */
-	/* TEQ			1111 0x00 1001 xxxx 0xxx 1111 xxxx xxxx */
-	DECODE_EMULATEX	(0xfb708f00, 0xf0100f00, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, 0, 0, 0)),
-
-	/* CMN			1111 0x01 0001 xxxx 0xxx 1111 xxxx xxxx */
-	DECODE_OR	(0xfbf08f00, 0xf1100f00),
-	/* CMP			1111 0x01 1011 xxxx 0xxx 1111 xxxx xxxx */
-	DECODE_EMULATEX	(0xfbf08f00, 0xf1b00f00, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOPC, 0, 0, 0, 0)),
-
-	/* MOV			1111 0x00 010x 1111 0xxx xxxx xxxx xxxx */
-	/* MVN			1111 0x00 011x 1111 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfbcf8000, 0xf04f0000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(0, 0, NOSPPC, 0, 0)),
-
-	/* ???			1111 0x00 101x xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfbe08000, 0xf0a00000),
-	/* ???			1111 0x00 110x xxxx 0xxx xxxx xxxx xxxx */
-	/* ???			1111 0x00 111x xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfbc08000, 0xf0c00000),
-	/* ???			1111 0x01 001x xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfbe08000, 0xf1200000),
-	/* ???			1111 0x01 100x xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfbe08000, 0xf1800000),
-	/* ???			1111 0x01 111x xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfbe08000, 0xf1e00000),
-
-	/* ADD Rd, SP, #imm	1111 0x01 000x 1101 0xxx xxxx xxxx xxxx */
-	/* SUB Rd, SP, #imm	1111 0x01 101x 1101 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfb4f8000, 0xf10d0000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(SP, 0, NOPC, 0, 0)),
-
-	/* AND			1111 0x00 000x xxxx 0xxx xxxx xxxx xxxx */
-	/* BIC			1111 0x00 001x xxxx 0xxx xxxx xxxx xxxx */
-	/* ORR			1111 0x00 010x xxxx 0xxx xxxx xxxx xxxx */
-	/* ORN			1111 0x00 011x xxxx 0xxx xxxx xxxx xxxx */
-	/* EOR			1111 0x00 100x xxxx 0xxx xxxx xxxx xxxx */
-	/* ADD			1111 0x01 000x xxxx 0xxx xxxx xxxx xxxx */
-	/* ADC			1111 0x01 010x xxxx 0xxx xxxx xxxx xxxx */
-	/* SBC			1111 0x01 011x xxxx 0xxx xxxx xxxx xxxx */
-	/* SUB			1111 0x01 101x xxxx 0xxx xxxx xxxx xxxx */
-	/* RSB			1111 0x01 110x xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfa008000, 0xf0000000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, 0)),
-
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_0x1x___0[] = {
-	/* Data-processing (plain binary immediate)			*/
-
-	/* ADDW Rd, PC, #imm	1111 0x10 0000 1111 0xxx xxxx xxxx xxxx */
-	DECODE_OR	(0xfbff8000, 0xf20f0000),
-	/* SUBW	Rd, PC, #imm	1111 0x10 1010 1111 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfbff8000, 0xf2af0000, t32_emulate_rd8pc16_noflags,
-						 REGS(PC, 0, NOSPPC, 0, 0)),
-
-	/* ADDW SP, SP, #imm	1111 0x10 0000 1101 0xxx 1101 xxxx xxxx */
-	DECODE_OR	(0xfbff8f00, 0xf20d0d00),
-	/* SUBW	SP, SP, #imm	1111 0x10 1010 1101 0xxx 1101 xxxx xxxx */
-	DECODE_EMULATEX	(0xfbff8f00, 0xf2ad0d00, t32_emulate_rd8rn16_noflags,
-						 REGS(SP, 0, SP, 0, 0)),
-
-	/* ADDW			1111 0x10 0000 xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_OR	(0xfbf08000, 0xf2000000),
-	/* SUBW			1111 0x10 1010 xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfbf08000, 0xf2a00000, t32_emulate_rd8rn16_noflags,
-						 REGS(NOPCX, 0, NOSPPC, 0, 0)),
-
-	/* MOVW			1111 0x10 0100 xxxx 0xxx xxxx xxxx xxxx */
-	/* MOVT			1111 0x10 1100 xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfb708000, 0xf2400000, t32_emulate_rd8rn16_noflags,
-						 REGS(0, 0, NOSPPC, 0, 0)),
-
-	/* SSAT16		1111 0x11 0010 xxxx 0000 xxxx 00xx xxxx */
-	/* SSAT			1111 0x11 00x0 xxxx 0xxx xxxx xxxx xxxx */
-	/* USAT16		1111 0x11 1010 xxxx 0000 xxxx 00xx xxxx */
-	/* USAT			1111 0x11 10x0 xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfb508000, 0xf3000000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, 0)),
-
-	/* SFBX			1111 0x11 0100 xxxx 0xxx xxxx xxxx xxxx */
-	/* UFBX			1111 0x11 1100 xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfb708000, 0xf3400000, t32_emulate_rd8rn16_noflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, 0)),
-
-	/* BFC			1111 0x11 0110 1111 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfbff8000, 0xf36f0000, t32_emulate_rd8rn16_noflags,
-						 REGS(0, 0, NOSPPC, 0, 0)),
-
-	/* BFI			1111 0x11 0110 xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfbf08000, 0xf3600000, t32_emulate_rd8rn16_noflags,
-						 REGS(NOSPPCX, 0, NOSPPC, 0, 0)),
-
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_0xxx___1[] = {
-	/* Branches and miscellaneous control				*/
-
-	/* YIELD		1111 0011 1010 xxxx 10x0 x000 0000 0001 */
-	DECODE_OR	(0xfff0d7ff, 0xf3a08001),
-	/* SEV			1111 0011 1010 xxxx 10x0 x000 0000 0100 */
-	DECODE_EMULATE	(0xfff0d7ff, 0xf3a08004, kprobe_emulate_none),
-	/* NOP			1111 0011 1010 xxxx 10x0 x000 0000 0000 */
-	/* WFE			1111 0011 1010 xxxx 10x0 x000 0000 0010 */
-	/* WFI			1111 0011 1010 xxxx 10x0 x000 0000 0011 */
-	DECODE_SIMULATE	(0xfff0d7fc, 0xf3a08000, kprobe_simulate_nop),
-
-	/* MRS Rd, CPSR		1111 0011 1110 xxxx 10x0 xxxx xxxx xxxx */
-	DECODE_SIMULATEX(0xfff0d000, 0xf3e08000, t32_simulate_mrs,
-						 REGS(0, 0, NOSPPC, 0, 0)),
-
-	/*
-	 * Unsupported instructions
-	 *			1111 0x11 1xxx xxxx 10x0 xxxx xxxx xxxx
-	 *
-	 * MSR			1111 0011 100x xxxx 10x0 xxxx xxxx xxxx
-	 * DBG hint		1111 0011 1010 xxxx 10x0 x000 1111 xxxx
-	 * Unallocated hints	1111 0011 1010 xxxx 10x0 x000 xxxx xxxx
-	 * CPS			1111 0011 1010 xxxx 10x0 xxxx xxxx xxxx
-	 * CLREX/DSB/DMB/ISB	1111 0011 1011 xxxx 10x0 xxxx xxxx xxxx
-	 * BXJ			1111 0011 1100 xxxx 10x0 xxxx xxxx xxxx
-	 * SUBS PC,LR,#<imm8>	1111 0011 1101 xxxx 10x0 xxxx xxxx xxxx
-	 * MRS Rd, SPSR		1111 0011 1111 xxxx 10x0 xxxx xxxx xxxx
-	 * SMC			1111 0111 1111 xxxx 1000 xxxx xxxx xxxx
-	 * UNDEFINED		1111 0111 1111 xxxx 1010 xxxx xxxx xxxx
-	 * ???			1111 0111 1xxx xxxx 1010 xxxx xxxx xxxx
-	 */
-	DECODE_REJECT	(0xfb80d000, 0xf3808000),
-
-	/* Bcc			1111 0xxx xxxx xxxx 10x0 xxxx xxxx xxxx */
-	DECODE_CUSTOM	(0xf800d000, 0xf0008000, t32_decode_cond_branch),
-
-	/* BLX			1111 0xxx xxxx xxxx 11x0 xxxx xxxx xxx0 */
-	DECODE_OR	(0xf800d001, 0xf000c000),
-	/* B			1111 0xxx xxxx xxxx 10x1 xxxx xxxx xxxx */
-	/* BL			1111 0xxx xxxx xxxx 11x1 xxxx xxxx xxxx */
-	DECODE_SIMULATE	(0xf8009000, 0xf0009000, t32_simulate_branch),
-
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_100x_x0x1__1111[] = {
-	/* Memory hints							*/
-
-	/* PLD (literal)	1111 1000 x001 1111 1111 xxxx xxxx xxxx */
-	/* PLI (literal)	1111 1001 x001 1111 1111 xxxx xxxx xxxx */
-	DECODE_SIMULATE	(0xfe7ff000, 0xf81ff000, kprobe_simulate_nop),
-
-	/* PLD{W} (immediate)	1111 1000 10x1 xxxx 1111 xxxx xxxx xxxx */
-	DECODE_OR	(0xffd0f000, 0xf890f000),
-	/* PLD{W} (immediate)	1111 1000 00x1 xxxx 1111 1100 xxxx xxxx */
-	DECODE_OR	(0xffd0ff00, 0xf810fc00),
-	/* PLI (immediate)	1111 1001 1001 xxxx 1111 xxxx xxxx xxxx */
-	DECODE_OR	(0xfff0f000, 0xf990f000),
-	/* PLI (immediate)	1111 1001 0001 xxxx 1111 1100 xxxx xxxx */
-	DECODE_SIMULATEX(0xfff0ff00, 0xf910fc00, kprobe_simulate_nop,
-						 REGS(NOPCX, 0, 0, 0, 0)),
-
-	/* PLD{W} (register)	1111 1000 00x1 xxxx 1111 0000 00xx xxxx */
-	DECODE_OR	(0xffd0ffc0, 0xf810f000),
-	/* PLI (register)	1111 1001 0001 xxxx 1111 0000 00xx xxxx */
-	DECODE_SIMULATEX(0xfff0ffc0, 0xf910f000, kprobe_simulate_nop,
-						 REGS(NOPCX, 0, 0, 0, NOSPPC)),
-
-	/* Other unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_100x[] = {
-	/* Store/Load single data item					*/
-
-	/* ???			1111 100x x11x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfe600000, 0xf8600000),
-
-	/* ???			1111 1001 0101 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfff00000, 0xf9500000),
-
-	/* ???			1111 100x 0xxx xxxx xxxx 10x0 xxxx xxxx */
-	DECODE_REJECT	(0xfe800d00, 0xf8000800),
-
-	/* STRBT		1111 1000 0000 xxxx xxxx 1110 xxxx xxxx */
-	/* STRHT		1111 1000 0010 xxxx xxxx 1110 xxxx xxxx */
-	/* STRT			1111 1000 0100 xxxx xxxx 1110 xxxx xxxx */
-	/* LDRBT		1111 1000 0001 xxxx xxxx 1110 xxxx xxxx */
-	/* LDRSBT		1111 1001 0001 xxxx xxxx 1110 xxxx xxxx */
-	/* LDRHT		1111 1000 0011 xxxx xxxx 1110 xxxx xxxx */
-	/* LDRSHT		1111 1001 0011 xxxx xxxx 1110 xxxx xxxx */
-	/* LDRT			1111 1000 0101 xxxx xxxx 1110 xxxx xxxx */
-	DECODE_REJECT	(0xfe800f00, 0xf8000e00),
-
-	/* STR{,B,H} Rn,[PC...]	1111 1000 xxx0 1111 xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xff1f0000, 0xf80f0000),
-
-	/* STR{,B,H} PC,[Rn...]	1111 1000 xxx0 xxxx 1111 xxxx xxxx xxxx */
-	DECODE_REJECT	(0xff10f000, 0xf800f000),
-
-	/* LDR (literal)	1111 1000 x101 1111 xxxx xxxx xxxx xxxx */
-	DECODE_SIMULATEX(0xff7f0000, 0xf85f0000, t32_simulate_ldr_literal,
-						 REGS(PC, ANY, 0, 0, 0)),
-
-	/* STR (immediate)	1111 1000 0100 xxxx xxxx 1xxx xxxx xxxx */
-	/* LDR (immediate)	1111 1000 0101 xxxx xxxx 1xxx xxxx xxxx */
-	DECODE_OR	(0xffe00800, 0xf8400800),
-	/* STR (immediate)	1111 1000 1100 xxxx xxxx xxxx xxxx xxxx */
-	/* LDR (immediate)	1111 1000 1101 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xffe00000, 0xf8c00000, t32_emulate_ldrstr,
-						 REGS(NOPCX, ANY, 0, 0, 0)),
-
-	/* STR (register)	1111 1000 0100 xxxx xxxx 0000 00xx xxxx */
-	/* LDR (register)	1111 1000 0101 xxxx xxxx 0000 00xx xxxx */
-	DECODE_EMULATEX	(0xffe00fc0, 0xf8400000, t32_emulate_ldrstr,
-						 REGS(NOPCX, ANY, 0, 0, NOSPPC)),
-
-	/* LDRB (literal)	1111 1000 x001 1111 xxxx xxxx xxxx xxxx */
-	/* LDRSB (literal)	1111 1001 x001 1111 xxxx xxxx xxxx xxxx */
-	/* LDRH (literal)	1111 1000 x011 1111 xxxx xxxx xxxx xxxx */
-	/* LDRSH (literal)	1111 1001 x011 1111 xxxx xxxx xxxx xxxx */
-	DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
-						 REGS(PC, NOSPPCX, 0, 0, 0)),
-
-	/* STRB (immediate)	1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */
-	/* STRH (immediate)	1111 1000 0010 xxxx xxxx 1xxx xxxx xxxx */
-	/* LDRB (immediate)	1111 1000 0001 xxxx xxxx 1xxx xxxx xxxx */
-	/* LDRSB (immediate)	1111 1001 0001 xxxx xxxx 1xxx xxxx xxxx */
-	/* LDRH (immediate)	1111 1000 0011 xxxx xxxx 1xxx xxxx xxxx */
-	/* LDRSH (immediate)	1111 1001 0011 xxxx xxxx 1xxx xxxx xxxx */
-	DECODE_OR	(0xfec00800, 0xf8000800),
-	/* STRB (immediate)	1111 1000 1000 xxxx xxxx xxxx xxxx xxxx */
-	/* STRH (immediate)	1111 1000 1010 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRB (immediate)	1111 1000 1001 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRSB (immediate)	1111 1001 1001 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRH (immediate)	1111 1000 1011 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRSH (immediate)	1111 1001 1011 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfec00000, 0xf8800000, t32_emulate_ldrstr,
-						 REGS(NOPCX, NOSPPCX, 0, 0, 0)),
-
-	/* STRB (register)	1111 1000 0000 xxxx xxxx 0000 00xx xxxx */
-	/* STRH (register)	1111 1000 0010 xxxx xxxx 0000 00xx xxxx */
-	/* LDRB (register)	1111 1000 0001 xxxx xxxx 0000 00xx xxxx */
-	/* LDRSB (register)	1111 1001 0001 xxxx xxxx 0000 00xx xxxx */
-	/* LDRH (register)	1111 1000 0011 xxxx xxxx 0000 00xx xxxx */
-	/* LDRSH (register)	1111 1001 0011 xxxx xxxx 0000 00xx xxxx */
-	DECODE_EMULATEX	(0xfe800fc0, 0xf8000000, t32_emulate_ldrstr,
-						 REGS(NOPCX, NOSPPCX, 0, 0, NOSPPC)),
-
-	/* Other unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_1010___1111[] = {
-	/* Data-processing (register)					*/
-
-	/* ???			1111 1010 011x xxxx 1111 xxxx 1xxx xxxx */
-	DECODE_REJECT	(0xffe0f080, 0xfa60f080),
-
-	/* SXTH			1111 1010 0000 1111 1111 xxxx 1xxx xxxx */
-	/* UXTH			1111 1010 0001 1111 1111 xxxx 1xxx xxxx */
-	/* SXTB16		1111 1010 0010 1111 1111 xxxx 1xxx xxxx */
-	/* UXTB16		1111 1010 0011 1111 1111 xxxx 1xxx xxxx */
-	/* SXTB			1111 1010 0100 1111 1111 xxxx 1xxx xxxx */
-	/* UXTB			1111 1010 0101 1111 1111 xxxx 1xxx xxxx */
-	DECODE_EMULATEX	(0xff8ff080, 0xfa0ff080, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(0, 0, NOSPPC, 0, NOSPPC)),
-
-
-	/* ???			1111 1010 1xxx xxxx 1111 xxxx 0x11 xxxx */
-	DECODE_REJECT	(0xff80f0b0, 0xfa80f030),
-	/* ???			1111 1010 1x11 xxxx 1111 xxxx 0xxx xxxx */
-	DECODE_REJECT	(0xffb0f080, 0xfab0f000),
-
-	/* SADD16		1111 1010 1001 xxxx 1111 xxxx 0000 xxxx */
-	/* SASX			1111 1010 1010 xxxx 1111 xxxx 0000 xxxx */
-	/* SSAX			1111 1010 1110 xxxx 1111 xxxx 0000 xxxx */
-	/* SSUB16		1111 1010 1101 xxxx 1111 xxxx 0000 xxxx */
-	/* SADD8		1111 1010 1000 xxxx 1111 xxxx 0000 xxxx */
-	/* SSUB8		1111 1010 1100 xxxx 1111 xxxx 0000 xxxx */
-
-	/* QADD16		1111 1010 1001 xxxx 1111 xxxx 0001 xxxx */
-	/* QASX			1111 1010 1010 xxxx 1111 xxxx 0001 xxxx */
-	/* QSAX			1111 1010 1110 xxxx 1111 xxxx 0001 xxxx */
-	/* QSUB16		1111 1010 1101 xxxx 1111 xxxx 0001 xxxx */
-	/* QADD8		1111 1010 1000 xxxx 1111 xxxx 0001 xxxx */
-	/* QSUB8		1111 1010 1100 xxxx 1111 xxxx 0001 xxxx */
-
-	/* SHADD16		1111 1010 1001 xxxx 1111 xxxx 0010 xxxx */
-	/* SHASX		1111 1010 1010 xxxx 1111 xxxx 0010 xxxx */
-	/* SHSAX		1111 1010 1110 xxxx 1111 xxxx 0010 xxxx */
-	/* SHSUB16		1111 1010 1101 xxxx 1111 xxxx 0010 xxxx */
-	/* SHADD8		1111 1010 1000 xxxx 1111 xxxx 0010 xxxx */
-	/* SHSUB8		1111 1010 1100 xxxx 1111 xxxx 0010 xxxx */
-
-	/* UADD16		1111 1010 1001 xxxx 1111 xxxx 0100 xxxx */
-	/* UASX			1111 1010 1010 xxxx 1111 xxxx 0100 xxxx */
-	/* USAX			1111 1010 1110 xxxx 1111 xxxx 0100 xxxx */
-	/* USUB16		1111 1010 1101 xxxx 1111 xxxx 0100 xxxx */
-	/* UADD8		1111 1010 1000 xxxx 1111 xxxx 0100 xxxx */
-	/* USUB8		1111 1010 1100 xxxx 1111 xxxx 0100 xxxx */
-
-	/* UQADD16		1111 1010 1001 xxxx 1111 xxxx 0101 xxxx */
-	/* UQASX		1111 1010 1010 xxxx 1111 xxxx 0101 xxxx */
-	/* UQSAX		1111 1010 1110 xxxx 1111 xxxx 0101 xxxx */
-	/* UQSUB16		1111 1010 1101 xxxx 1111 xxxx 0101 xxxx */
-	/* UQADD8		1111 1010 1000 xxxx 1111 xxxx 0101 xxxx */
-	/* UQSUB8		1111 1010 1100 xxxx 1111 xxxx 0101 xxxx */
-
-	/* UHADD16		1111 1010 1001 xxxx 1111 xxxx 0110 xxxx */
-	/* UHASX		1111 1010 1010 xxxx 1111 xxxx 0110 xxxx */
-	/* UHSAX		1111 1010 1110 xxxx 1111 xxxx 0110 xxxx */
-	/* UHSUB16		1111 1010 1101 xxxx 1111 xxxx 0110 xxxx */
-	/* UHADD8		1111 1010 1000 xxxx 1111 xxxx 0110 xxxx */
-	/* UHSUB8		1111 1010 1100 xxxx 1111 xxxx 0110 xxxx */
-	DECODE_OR	(0xff80f080, 0xfa80f000),
-
-	/* SXTAH		1111 1010 0000 xxxx 1111 xxxx 1xxx xxxx */
-	/* UXTAH		1111 1010 0001 xxxx 1111 xxxx 1xxx xxxx */
-	/* SXTAB16		1111 1010 0010 xxxx 1111 xxxx 1xxx xxxx */
-	/* UXTAB16		1111 1010 0011 xxxx 1111 xxxx 1xxx xxxx */
-	/* SXTAB		1111 1010 0100 xxxx 1111 xxxx 1xxx xxxx */
-	/* UXTAB		1111 1010 0101 xxxx 1111 xxxx 1xxx xxxx */
-	DECODE_OR	(0xff80f080, 0xfa00f080),
-
-	/* QADD			1111 1010 1000 xxxx 1111 xxxx 1000 xxxx */
-	/* QDADD		1111 1010 1000 xxxx 1111 xxxx 1001 xxxx */
-	/* QSUB			1111 1010 1000 xxxx 1111 xxxx 1010 xxxx */
-	/* QDSUB		1111 1010 1000 xxxx 1111 xxxx 1011 xxxx */
-	DECODE_OR	(0xfff0f0c0, 0xfa80f080),
-
-	/* SEL			1111 1010 1010 xxxx 1111 xxxx 1000 xxxx */
-	DECODE_OR	(0xfff0f0f0, 0xfaa0f080),
-
-	/* LSL			1111 1010 000x xxxx 1111 xxxx 0000 xxxx */
-	/* LSR			1111 1010 001x xxxx 1111 xxxx 0000 xxxx */
-	/* ASR			1111 1010 010x xxxx 1111 xxxx 0000 xxxx */
-	/* ROR			1111 1010 011x xxxx 1111 xxxx 0000 xxxx */
-	DECODE_EMULATEX	(0xff80f0f0, 0xfa00f000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)),
-
-	/* CLZ			1111 1010 1010 xxxx 1111 xxxx 1000 xxxx */
-	DECODE_OR	(0xfff0f0f0, 0xfab0f080),
-
-	/* REV			1111 1010 1001 xxxx 1111 xxxx 1000 xxxx */
-	/* REV16		1111 1010 1001 xxxx 1111 xxxx 1001 xxxx */
-	/* RBIT			1111 1010 1001 xxxx 1111 xxxx 1010 xxxx */
-	/* REVSH		1111 1010 1001 xxxx 1111 xxxx 1011 xxxx */
-	DECODE_EMULATEX	(0xfff0f0c0, 0xfa90f080, t32_emulate_rd8rn16_noflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, SAMEAS16)),
-
-	/* Other unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_1011_0[] = {
-	/* Multiply, multiply accumulate, and absolute difference	*/
-
-	/* ???			1111 1011 0000 xxxx 1111 xxxx 0001 xxxx */
-	DECODE_REJECT	(0xfff0f0f0, 0xfb00f010),
-	/* ???			1111 1011 0111 xxxx 1111 xxxx 0001 xxxx */
-	DECODE_REJECT	(0xfff0f0f0, 0xfb70f010),
-
-	/* SMULxy		1111 1011 0001 xxxx 1111 xxxx 00xx xxxx */
-	DECODE_OR	(0xfff0f0c0, 0xfb10f000),
-	/* MUL			1111 1011 0000 xxxx 1111 xxxx 0000 xxxx */
-	/* SMUAD{X}		1111 1011 0010 xxxx 1111 xxxx 000x xxxx */
-	/* SMULWy		1111 1011 0011 xxxx 1111 xxxx 000x xxxx */
-	/* SMUSD{X}		1111 1011 0100 xxxx 1111 xxxx 000x xxxx */
-	/* SMMUL{R}		1111 1011 0101 xxxx 1111 xxxx 000x xxxx */
-	/* USAD8		1111 1011 0111 xxxx 1111 xxxx 0000 xxxx */
-	DECODE_EMULATEX	(0xff80f0e0, 0xfb00f000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)),
-
-	/* ???			1111 1011 0111 xxxx xxxx xxxx 0001 xxxx */
-	DECODE_REJECT	(0xfff000f0, 0xfb700010),
-
-	/* SMLAxy		1111 1011 0001 xxxx xxxx xxxx 00xx xxxx */
-	DECODE_OR	(0xfff000c0, 0xfb100000),
-	/* MLA			1111 1011 0000 xxxx xxxx xxxx 0000 xxxx */
-	/* MLS			1111 1011 0000 xxxx xxxx xxxx 0001 xxxx */
-	/* SMLAD{X}		1111 1011 0010 xxxx xxxx xxxx 000x xxxx */
-	/* SMLAWy		1111 1011 0011 xxxx xxxx xxxx 000x xxxx */
-	/* SMLSD{X}		1111 1011 0100 xxxx xxxx xxxx 000x xxxx */
-	/* SMMLA{R}		1111 1011 0101 xxxx xxxx xxxx 000x xxxx */
-	/* SMMLS{R}		1111 1011 0110 xxxx xxxx xxxx 000x xxxx */
-	/* USADA8		1111 1011 0111 xxxx xxxx xxxx 0000 xxxx */
-	DECODE_EMULATEX	(0xff8000c0, 0xfb000000, t32_emulate_rd8rn16rm0ra12_noflags,
-						 REGS(NOSPPC, NOSPPCX, NOSPPC, 0, NOSPPC)),
-
-	/* Other unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_1011_1[] = {
-	/* Long multiply, long multiply accumulate, and divide		*/
-
-	/* UMAAL		1111 1011 1110 xxxx xxxx xxxx 0110 xxxx */
-	DECODE_OR	(0xfff000f0, 0xfbe00060),
-	/* SMLALxy		1111 1011 1100 xxxx xxxx xxxx 10xx xxxx */
-	DECODE_OR	(0xfff000c0, 0xfbc00080),
-	/* SMLALD{X}		1111 1011 1100 xxxx xxxx xxxx 110x xxxx */
-	/* SMLSLD{X}		1111 1011 1101 xxxx xxxx xxxx 110x xxxx */
-	DECODE_OR	(0xffe000e0, 0xfbc000c0),
-	/* SMULL		1111 1011 1000 xxxx xxxx xxxx 0000 xxxx */
-	/* UMULL		1111 1011 1010 xxxx xxxx xxxx 0000 xxxx */
-	/* SMLAL		1111 1011 1100 xxxx xxxx xxxx 0000 xxxx */
-	/* UMLAL		1111 1011 1110 xxxx xxxx xxxx 0000 xxxx */
-	DECODE_EMULATEX	(0xff9000f0, 0xfb800000, t32_emulate_rdlo12rdhi8rn16rm0_noflags,
-						 REGS(NOSPPC, NOSPPC, NOSPPC, 0, NOSPPC)),
-
-	/* SDIV			1111 1011 1001 xxxx xxxx xxxx 1111 xxxx */
-	/* UDIV			1111 1011 1011 xxxx xxxx xxxx 1111 xxxx */
-	/* Other unallocated instructions...				*/
-	DECODE_END
-};
-
-const union decode_item kprobe_decode_thumb32_table[] = {
-
-	/*
-	 * Load/store multiple instructions
-	 *			1110 100x x0xx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfe400000, 0xe8000000, t32_table_1110_100x_x0xx),
-
-	/*
-	 * Load/store dual, load/store exclusive, table branch
-	 *			1110 100x x1xx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfe400000, 0xe8400000, t32_table_1110_100x_x1xx),
-
-	/*
-	 * Data-processing (shifted register)
-	 *			1110 101x xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfe000000, 0xea000000, t32_table_1110_101x),
-
-	/*
-	 * Coprocessor instructions
-	 *			1110 11xx xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_REJECT	(0xfc000000, 0xec000000),
-
-	/*
-	 * Data-processing (modified immediate)
-	 *			1111 0x0x xxxx xxxx 0xxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfa008000, 0xf0000000, t32_table_1111_0x0x___0),
-
-	/*
-	 * Data-processing (plain binary immediate)
-	 *			1111 0x1x xxxx xxxx 0xxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfa008000, 0xf2000000, t32_table_1111_0x1x___0),
-
-	/*
-	 * Branches and miscellaneous control
-	 *			1111 0xxx xxxx xxxx 1xxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xf8008000, 0xf0008000, t32_table_1111_0xxx___1),
-
-	/*
-	 * Advanced SIMD element or structure load/store instructions
-	 *			1111 1001 xxx0 xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_REJECT	(0xff100000, 0xf9000000),
-
-	/*
-	 * Memory hints
-	 *			1111 100x x0x1 xxxx 1111 xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfe50f000, 0xf810f000, t32_table_1111_100x_x0x1__1111),
-
-	/*
-	 * Store single data item
-	 *			1111 1000 xxx0 xxxx xxxx xxxx xxxx xxxx
-	 * Load single data items
-	 *			1111 100x xxx1 xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfe000000, 0xf8000000, t32_table_1111_100x),
-
-	/*
-	 * Data-processing (register)
-	 *			1111 1010 xxxx xxxx 1111 xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xff00f000, 0xfa00f000, t32_table_1111_1010___1111),
-
-	/*
-	 * Multiply, multiply accumulate, and absolute difference
-	 *			1111 1011 0xxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xff800000, 0xfb000000, t32_table_1111_1011_0),
-
-	/*
-	 * Long multiply, long multiply accumulate, and divide
-	 *			1111 1011 1xxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xff800000, 0xfb800000, t32_table_1111_1011_1),
-
-	/*
-	 * Coprocessor instructions
-	 *			1111 11xx xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_END
-};
-#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
-EXPORT_SYMBOL_GPL(kprobe_decode_thumb32_table);
-#endif
+/* t16 thumb actions */
 
 static void __kprobes
-t16_simulate_bxblx(struct kprobe *p, struct pt_regs *regs)
+t16_simulate_bxblx(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
+	unsigned long pc = regs->ARM_pc + 2;
 	int rm = (insn >> 3) & 0xf;
 	unsigned long rmv = (rm == 15) ? pc : regs->uregs[rm];
 
 	if (insn & (1 << 7)) /* BLX ? */
-		regs->ARM_lr = (unsigned long)p->addr + 2;
+		regs->ARM_lr = regs->ARM_pc | 1;
 
 	bx_write_pc(rmv, regs);
 }
 
 static void __kprobes
-t16_simulate_ldr_literal(struct kprobe *p, struct pt_regs *regs)
+t16_simulate_ldr_literal(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long* base = (unsigned long *)(thumb_probe_pc(p) & ~3);
+	unsigned long *base = (unsigned long *)((regs->ARM_pc + 2) & ~3);
 	long index = insn & 0xff;
 	int rt = (insn >> 8) & 0x7;
 	regs->uregs[rt] = base[index];
 }
 
 static void __kprobes
-t16_simulate_ldrstr_sp_relative(struct kprobe *p, struct pt_regs *regs)
+t16_simulate_ldrstr_sp_relative(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	unsigned long* base = (unsigned long *)regs->ARM_sp;
 	long index = insn & 0xff;
 	int rt = (insn >> 8) & 0x7;
@@ -986,20 +342,20 @@ t16_simulate_ldrstr_sp_relative(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-t16_simulate_reladr(struct kprobe *p, struct pt_regs *regs)
+t16_simulate_reladr(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	unsigned long base = (insn & 0x800) ? regs->ARM_sp
-					    : (thumb_probe_pc(p) & ~3);
+					    : ((regs->ARM_pc + 2) & ~3);
 	long offset = insn & 0xff;
 	int rt = (insn >> 8) & 0x7;
 	regs->uregs[rt] = base + offset * 4;
 }
 
 static void __kprobes
-t16_simulate_add_sp_imm(struct kprobe *p, struct pt_regs *regs)
+t16_simulate_add_sp_imm(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	long imm = insn & 0x7f;
 	if (insn & 0x80) /* SUB */
 		regs->ARM_sp -= imm * 4;
@@ -1008,21 +364,22 @@ t16_simulate_add_sp_imm(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-t16_simulate_cbz(struct kprobe *p, struct pt_regs *regs)
+t16_simulate_cbz(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
 	int rn = insn & 0x7;
-	kprobe_opcode_t nonzero = regs->uregs[rn] ? insn : ~insn;
+	probes_opcode_t nonzero = regs->uregs[rn] ? insn : ~insn;
 	if (nonzero & 0x800) {
 		long i = insn & 0x200;
 		long imm5 = insn & 0xf8;
-		unsigned long pc = thumb_probe_pc(p);
+		unsigned long pc = regs->ARM_pc + 2;
 		regs->ARM_pc = pc + (i >> 3) + (imm5 >> 2);
 	}
 }
 
 static void __kprobes
-t16_simulate_it(struct kprobe *p, struct pt_regs *regs)
+t16_simulate_it(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
 	/*
 	 * The 8 IT state bits are split into two parts in CPSR:
@@ -1030,7 +387,6 @@ t16_simulate_it(struct kprobe *p, struct pt_regs *regs)
 	 *	ITSTATE<7:2> are in CPSR<15:10>
 	 * The new IT state is in the lower byte of insn.
 	 */
-	kprobe_opcode_t insn = p->opcode;
 	unsigned long cpsr = regs->ARM_cpsr;
 	cpsr &= ~PSR_IT_MASK;
 	cpsr |= (insn & 0xfc) << 8;
@@ -1039,50 +395,54 @@ t16_simulate_it(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-t16_singlestep_it(struct kprobe *p, struct pt_regs *regs)
+t16_singlestep_it(probes_opcode_t insn,
+		  struct arch_probes_insn *asi, struct pt_regs *regs)
 {
 	regs->ARM_pc += 2;
-	t16_simulate_it(p, regs);
+	t16_simulate_it(insn, asi, regs);
 }
 
-static enum kprobe_insn __kprobes
-t16_decode_it(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+static enum probes_insn __kprobes
+t16_decode_it(probes_opcode_t insn, struct arch_probes_insn *asi,
+		const struct decode_header *d)
 {
 	asi->insn_singlestep = t16_singlestep_it;
 	return INSN_GOOD_NO_SLOT;
 }
 
 static void __kprobes
-t16_simulate_cond_branch(struct kprobe *p, struct pt_regs *regs)
+t16_simulate_cond_branch(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
+	unsigned long pc = regs->ARM_pc + 2;
 	long offset = insn & 0x7f;
 	offset -= insn & 0x80; /* Apply sign bit */
 	regs->ARM_pc = pc + (offset * 2);
 }
 
-static enum kprobe_insn __kprobes
-t16_decode_cond_branch(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+static enum probes_insn __kprobes
+t16_decode_cond_branch(probes_opcode_t insn, struct arch_probes_insn *asi,
+		const struct decode_header *d)
 {
 	int cc = (insn >> 8) & 0xf;
-	asi->insn_check_cc = kprobe_condition_checks[cc];
+	asi->insn_check_cc = probes_condition_checks[cc];
 	asi->insn_handler = t16_simulate_cond_branch;
 	return INSN_GOOD_NO_SLOT;
 }
 
 static void __kprobes
-t16_simulate_branch(struct kprobe *p, struct pt_regs *regs)
+t16_simulate_branch(probes_opcode_t insn,
+		   struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
+	unsigned long pc = regs->ARM_pc + 2;
 	long offset = insn & 0x3ff;
 	offset -= insn & 0x400; /* Apply sign bit */
 	regs->ARM_pc = pc + (offset * 2);
 }
 
 static unsigned long __kprobes
-t16_emulate_loregs(struct kprobe *p, struct pt_regs *regs)
+t16_emulate_loregs(probes_opcode_t insn,
+		   struct arch_probes_insn *asi, struct pt_regs *regs)
 {
 	unsigned long oldcpsr = regs->ARM_cpsr;
 	unsigned long newcpsr;
@@ -1095,7 +455,7 @@ t16_emulate_loregs(struct kprobe *p, struct pt_regs *regs)
 		"mrs	%[newcpsr], cpsr	\n\t"
 		: [newcpsr] "=r" (newcpsr)
 		: [oldcpsr] "r" (oldcpsr), [regs] "r" (regs),
-		  [fn] "r" (p->ainsn.insn_fn)
+		  [fn] "r" (asi->insn_fn)
 		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
 		  "lr", "memory", "cc"
 		);
@@ -1104,24 +464,26 @@ t16_emulate_loregs(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
-t16_emulate_loregs_rwflags(struct kprobe *p, struct pt_regs *regs)
+t16_emulate_loregs_rwflags(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	regs->ARM_cpsr = t16_emulate_loregs(p, regs);
+	regs->ARM_cpsr = t16_emulate_loregs(insn, asi, regs);
 }
 
 static void __kprobes
-t16_emulate_loregs_noitrwflags(struct kprobe *p, struct pt_regs *regs)
+t16_emulate_loregs_noitrwflags(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	unsigned long cpsr = t16_emulate_loregs(p, regs);
+	unsigned long cpsr = t16_emulate_loregs(insn, asi, regs);
 	if (!in_it_block(cpsr))
 		regs->ARM_cpsr = cpsr;
 }
 
 static void __kprobes
-t16_emulate_hiregs(struct kprobe *p, struct pt_regs *regs)
+t16_emulate_hiregs(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
+	unsigned long pc = regs->ARM_pc + 2;
 	int rdn = (insn & 0x7) | ((insn & 0x80) >> 4);
 	int rm = (insn >> 3) & 0xf;
 
@@ -1137,7 +499,7 @@ t16_emulate_hiregs(struct kprobe *p, struct pt_regs *regs)
 		"blx    %[fn]			\n\t"
 		"mrs	%[cpsr], cpsr		\n\t"
 		: "=r" (rdnv), [cpsr] "=r" (cpsr)
-		: "0" (rdnv), "r" (rmv), "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
+		: "0" (rdnv), "r" (rmv), "1" (cpsr), [fn] "r" (asi->insn_fn)
 		: "lr", "memory", "cc"
 	);
 
@@ -1148,18 +510,20 @@ t16_emulate_hiregs(struct kprobe *p, struct pt_regs *regs)
 	regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
 }
 
-static enum kprobe_insn __kprobes
-t16_decode_hiregs(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+static enum probes_insn __kprobes
+t16_decode_hiregs(probes_opcode_t insn, struct arch_probes_insn *asi,
+		const struct decode_header *d)
 {
 	insn &= ~0x00ff;
 	insn |= 0x001; /* Set Rdn = R1 and Rm = R0 */
-	((u16 *)asi->insn)[0] = insn;
+	((u16 *)asi->insn)[0] = __opcode_to_mem_thumb16(insn);
 	asi->insn_handler = t16_emulate_hiregs;
 	return INSN_GOOD;
 }
 
 static void __kprobes
-t16_emulate_push(struct kprobe *p, struct pt_regs *regs)
+t16_emulate_push(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
 	__asm__ __volatile__ (
 		"ldr	r9, [%[regs], #13*4]	\n\t"
@@ -1168,28 +532,32 @@ t16_emulate_push(struct kprobe *p, struct pt_regs *regs)
 		"blx	%[fn]			\n\t"
 		"str	r9, [%[regs], #13*4]	\n\t"
 		:
-		: [regs] "r" (regs), [fn] "r" (p->ainsn.insn_fn)
+		: [regs] "r" (regs), [fn] "r" (asi->insn_fn)
 		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9",
 		  "lr", "memory", "cc"
 		);
 }
 
-static enum kprobe_insn __kprobes
-t16_decode_push(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+static enum probes_insn __kprobes
+t16_decode_push(probes_opcode_t insn, struct arch_probes_insn *asi,
+		const struct decode_header *d)
 {
 	/*
 	 * To simulate a PUSH we use a Thumb-2 "STMDB R9!, {registers}"
 	 * and call it with R9=SP and LR in the register list represented
 	 * by R8.
 	 */
-	((u16 *)asi->insn)[0] = 0xe929;		/* 1st half STMDB R9!,{} */
-	((u16 *)asi->insn)[1] = insn & 0x1ff;	/* 2nd half (register list) */
+	/* 1st half STMDB R9!,{} */
+	((u16 *)asi->insn)[0] = __opcode_to_mem_thumb16(0xe929);
+	/* 2nd half (register list) */
+	((u16 *)asi->insn)[1] = __opcode_to_mem_thumb16(insn & 0x1ff);
 	asi->insn_handler = t16_emulate_push;
 	return INSN_GOOD;
 }
 
 static void __kprobes
-t16_emulate_pop_nopc(struct kprobe *p, struct pt_regs *regs)
+t16_emulate_pop_nopc(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
 	__asm__ __volatile__ (
 		"ldr	r9, [%[regs], #13*4]	\n\t"
@@ -1198,14 +566,15 @@ t16_emulate_pop_nopc(struct kprobe *p, struct pt_regs *regs)
 		"stmia	%[regs], {r0-r7}	\n\t"
 		"str	r9, [%[regs], #13*4]	\n\t"
 		:
-		: [regs] "r" (regs), [fn] "r" (p->ainsn.insn_fn)
+		: [regs] "r" (regs), [fn] "r" (asi->insn_fn)
 		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r9",
 		  "lr", "memory", "cc"
 		);
 }
 
 static void __kprobes
-t16_emulate_pop_pc(struct kprobe *p, struct pt_regs *regs)
+t16_emulate_pop_pc(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
 	register unsigned long pc asm("r8");
 
@@ -1216,7 +585,7 @@ t16_emulate_pop_pc(struct kprobe *p, struct pt_regs *regs)
 		"stmia	%[regs], {r0-r7}	\n\t"
 		"str	r9, [%[regs], #13*4]	\n\t"
 		: "=r" (pc)
-		: [regs] "r" (regs), [fn] "r" (p->ainsn.insn_fn)
+		: [regs] "r" (regs), [fn] "r" (asi->insn_fn)
 		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r9",
 		  "lr", "memory", "cc"
 		);
@@ -1224,246 +593,74 @@ t16_emulate_pop_pc(struct kprobe *p, struct pt_regs *regs)
 	bx_write_pc(pc, regs);
 }
 
-static enum kprobe_insn __kprobes
-t16_decode_pop(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+static enum probes_insn __kprobes
+t16_decode_pop(probes_opcode_t insn, struct arch_probes_insn *asi,
+		const struct decode_header *d)
 {
 	/*
 	 * To simulate a POP we use a Thumb-2 "LDMDB R9!, {registers}"
 	 * and call it with R9=SP and PC in the register list represented
 	 * by R8.
 	 */
-	((u16 *)asi->insn)[0] = 0xe8b9;		/* 1st half LDMIA R9!,{} */
-	((u16 *)asi->insn)[1] = insn & 0x1ff;	/* 2nd half (register list) */
+	/* 1st half LDMIA R9!,{} */
+	((u16 *)asi->insn)[0] = __opcode_to_mem_thumb16(0xe8b9);
+	/* 2nd half (register list) */
+	((u16 *)asi->insn)[1] = __opcode_to_mem_thumb16(insn & 0x1ff);
 	asi->insn_handler = insn & 0x100 ? t16_emulate_pop_pc
 					 : t16_emulate_pop_nopc;
 	return INSN_GOOD;
 }
 
-static const union decode_item t16_table_1011[] = {
-	/* Miscellaneous 16-bit instructions		    */
-
-	/* ADD (SP plus immediate)	1011 0000 0xxx xxxx */
-	/* SUB (SP minus immediate)	1011 0000 1xxx xxxx */
-	DECODE_SIMULATE	(0xff00, 0xb000, t16_simulate_add_sp_imm),
-
-	/* CBZ				1011 00x1 xxxx xxxx */
-	/* CBNZ				1011 10x1 xxxx xxxx */
-	DECODE_SIMULATE	(0xf500, 0xb100, t16_simulate_cbz),
-
-	/* SXTH				1011 0010 00xx xxxx */
-	/* SXTB				1011 0010 01xx xxxx */
-	/* UXTH				1011 0010 10xx xxxx */
-	/* UXTB				1011 0010 11xx xxxx */
-	/* REV				1011 1010 00xx xxxx */
-	/* REV16			1011 1010 01xx xxxx */
-	/* ???				1011 1010 10xx xxxx */
-	/* REVSH			1011 1010 11xx xxxx */
-	DECODE_REJECT	(0xffc0, 0xba80),
-	DECODE_EMULATE	(0xf500, 0xb000, t16_emulate_loregs_rwflags),
-
-	/* PUSH				1011 010x xxxx xxxx */
-	DECODE_CUSTOM	(0xfe00, 0xb400, t16_decode_push),
-	/* POP				1011 110x xxxx xxxx */
-	DECODE_CUSTOM	(0xfe00, 0xbc00, t16_decode_pop),
-
-	/*
-	 * If-Then, and hints
-	 *				1011 1111 xxxx xxxx
-	 */
-
-	/* YIELD			1011 1111 0001 0000 */
-	DECODE_OR	(0xffff, 0xbf10),
-	/* SEV				1011 1111 0100 0000 */
-	DECODE_EMULATE	(0xffff, 0xbf40, kprobe_emulate_none),
-	/* NOP				1011 1111 0000 0000 */
-	/* WFE				1011 1111 0010 0000 */
-	/* WFI				1011 1111 0011 0000 */
-	DECODE_SIMULATE	(0xffcf, 0xbf00, kprobe_simulate_nop),
-	/* Unassigned hints		1011 1111 xxxx 0000 */
-	DECODE_REJECT	(0xff0f, 0xbf00),
-	/* IT				1011 1111 xxxx xxxx */
-	DECODE_CUSTOM	(0xff00, 0xbf00, t16_decode_it),
-
-	/* SETEND			1011 0110 010x xxxx */
-	/* CPS				1011 0110 011x xxxx */
-	/* BKPT				1011 1110 xxxx xxxx */
-	/* And unallocated instructions...		    */
-	DECODE_END
+const union decode_action kprobes_t16_actions[NUM_PROBES_T16_ACTIONS] = {
+	[PROBES_T16_ADD_SP] = {.handler = t16_simulate_add_sp_imm},
+	[PROBES_T16_CBZ] = {.handler = t16_simulate_cbz},
+	[PROBES_T16_SIGN_EXTEND] = {.handler = t16_emulate_loregs_rwflags},
+	[PROBES_T16_PUSH] = {.decoder = t16_decode_push},
+	[PROBES_T16_POP] = {.decoder = t16_decode_pop},
+	[PROBES_T16_SEV] = {.handler = probes_emulate_none},
+	[PROBES_T16_WFE] = {.handler = probes_simulate_nop},
+	[PROBES_T16_IT] = {.decoder = t16_decode_it},
+	[PROBES_T16_CMP] = {.handler = t16_emulate_loregs_rwflags},
+	[PROBES_T16_ADDSUB] = {.handler = t16_emulate_loregs_noitrwflags},
+	[PROBES_T16_LOGICAL] = {.handler = t16_emulate_loregs_noitrwflags},
+	[PROBES_T16_LDR_LIT] = {.handler = t16_simulate_ldr_literal},
+	[PROBES_T16_BLX] = {.handler = t16_simulate_bxblx},
+	[PROBES_T16_HIREGOPS] = {.decoder = t16_decode_hiregs},
+	[PROBES_T16_LDRHSTRH] = {.handler = t16_emulate_loregs_rwflags},
+	[PROBES_T16_LDRSTR] = {.handler = t16_simulate_ldrstr_sp_relative},
+	[PROBES_T16_ADR] = {.handler = t16_simulate_reladr},
+	[PROBES_T16_LDMSTM] = {.handler = t16_emulate_loregs_rwflags},
+	[PROBES_T16_BRANCH_COND] = {.decoder = t16_decode_cond_branch},
+	[PROBES_T16_BRANCH] = {.handler = t16_simulate_branch},
 };
 
-const union decode_item kprobe_decode_thumb16_table[] = {
-
-	/*
-	 * Shift (immediate), add, subtract, move, and compare
-	 *				00xx xxxx xxxx xxxx
-	 */
-
-	/* CMP (immediate)		0010 1xxx xxxx xxxx */
-	DECODE_EMULATE	(0xf800, 0x2800, t16_emulate_loregs_rwflags),
-
-	/* ADD (register)		0001 100x xxxx xxxx */
-	/* SUB (register)		0001 101x xxxx xxxx */
-	/* LSL (immediate)		0000 0xxx xxxx xxxx */
-	/* LSR (immediate)		0000 1xxx xxxx xxxx */
-	/* ASR (immediate)		0001 0xxx xxxx xxxx */
-	/* ADD (immediate, Thumb)	0001 110x xxxx xxxx */
-	/* SUB (immediate, Thumb)	0001 111x xxxx xxxx */
-	/* MOV (immediate)		0010 0xxx xxxx xxxx */
-	/* ADD (immediate, Thumb)	0011 0xxx xxxx xxxx */
-	/* SUB (immediate, Thumb)	0011 1xxx xxxx xxxx */
-	DECODE_EMULATE	(0xc000, 0x0000, t16_emulate_loregs_noitrwflags),
-
-	/*
-	 * 16-bit Thumb data-processing instructions
-	 *				0100 00xx xxxx xxxx
-	 */
-
-	/* TST (register)		0100 0010 00xx xxxx */
-	DECODE_EMULATE	(0xffc0, 0x4200, t16_emulate_loregs_rwflags),
-	/* CMP (register)		0100 0010 10xx xxxx */
-	/* CMN (register)		0100 0010 11xx xxxx */
-	DECODE_EMULATE	(0xff80, 0x4280, t16_emulate_loregs_rwflags),
-	/* AND (register)		0100 0000 00xx xxxx */
-	/* EOR (register)		0100 0000 01xx xxxx */
-	/* LSL (register)		0100 0000 10xx xxxx */
-	/* LSR (register)		0100 0000 11xx xxxx */
-	/* ASR (register)		0100 0001 00xx xxxx */
-	/* ADC (register)		0100 0001 01xx xxxx */
-	/* SBC (register)		0100 0001 10xx xxxx */
-	/* ROR (register)		0100 0001 11xx xxxx */
-	/* RSB (immediate)		0100 0010 01xx xxxx */
-	/* ORR (register)		0100 0011 00xx xxxx */
-	/* MUL				0100 0011 00xx xxxx */
-	/* BIC (register)		0100 0011 10xx xxxx */
-	/* MVN (register)		0100 0011 10xx xxxx */
-	DECODE_EMULATE	(0xfc00, 0x4000, t16_emulate_loregs_noitrwflags),
-
-	/*
-	 * Special data instructions and branch and exchange
-	 *				0100 01xx xxxx xxxx
-	 */
-
-	/* BLX pc			0100 0111 1111 1xxx */
-	DECODE_REJECT	(0xfff8, 0x47f8),
-
-	/* BX (register)		0100 0111 0xxx xxxx */
-	/* BLX (register)		0100 0111 1xxx xxxx */
-	DECODE_SIMULATE (0xff00, 0x4700, t16_simulate_bxblx),
-
-	/* ADD pc, pc			0100 0100 1111 1111 */
-	DECODE_REJECT	(0xffff, 0x44ff),
-
-	/* ADD (register)		0100 0100 xxxx xxxx */
-	/* CMP (register)		0100 0101 xxxx xxxx */
-	/* MOV (register)		0100 0110 xxxx xxxx */
-	DECODE_CUSTOM	(0xfc00, 0x4400, t16_decode_hiregs),
-
-	/*
-	 * Load from Literal Pool
-	 * LDR (literal)		0100 1xxx xxxx xxxx
-	 */
-	DECODE_SIMULATE	(0xf800, 0x4800, t16_simulate_ldr_literal),
-
-	/*
-	 * 16-bit Thumb Load/store instructions
-	 *				0101 xxxx xxxx xxxx
-	 *				011x xxxx xxxx xxxx
-	 *				100x xxxx xxxx xxxx
-	 */
-
-	/* STR (register)		0101 000x xxxx xxxx */
-	/* STRH (register)		0101 001x xxxx xxxx */
-	/* STRB (register)		0101 010x xxxx xxxx */
-	/* LDRSB (register)		0101 011x xxxx xxxx */
-	/* LDR (register)		0101 100x xxxx xxxx */
-	/* LDRH (register)		0101 101x xxxx xxxx */
-	/* LDRB (register)		0101 110x xxxx xxxx */
-	/* LDRSH (register)		0101 111x xxxx xxxx */
-	/* STR (immediate, Thumb)	0110 0xxx xxxx xxxx */
-	/* LDR (immediate, Thumb)	0110 1xxx xxxx xxxx */
-	/* STRB (immediate, Thumb)	0111 0xxx xxxx xxxx */
-	/* LDRB (immediate, Thumb)	0111 1xxx xxxx xxxx */
-	DECODE_EMULATE	(0xc000, 0x4000, t16_emulate_loregs_rwflags),
-	/* STRH (immediate, Thumb)	1000 0xxx xxxx xxxx */
-	/* LDRH (immediate, Thumb)	1000 1xxx xxxx xxxx */
-	DECODE_EMULATE	(0xf000, 0x8000, t16_emulate_loregs_rwflags),
-	/* STR (immediate, Thumb)	1001 0xxx xxxx xxxx */
-	/* LDR (immediate, Thumb)	1001 1xxx xxxx xxxx */
-	DECODE_SIMULATE	(0xf000, 0x9000, t16_simulate_ldrstr_sp_relative),
-
-	/*
-	 * Generate PC-/SP-relative address
-	 * ADR (literal)		1010 0xxx xxxx xxxx
-	 * ADD (SP plus immediate)	1010 1xxx xxxx xxxx
-	 */
-	DECODE_SIMULATE	(0xf000, 0xa000, t16_simulate_reladr),
-
-	/*
-	 * Miscellaneous 16-bit instructions
-	 *				1011 xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xf000, 0xb000, t16_table_1011),
-
-	/* STM				1100 0xxx xxxx xxxx */
-	/* LDM				1100 1xxx xxxx xxxx */
-	DECODE_EMULATE	(0xf000, 0xc000, t16_emulate_loregs_rwflags),
-
-	/*
-	 * Conditional branch, and Supervisor Call
-	 */
-
-	/* Permanently UNDEFINED	1101 1110 xxxx xxxx */
-	/* SVC				1101 1111 xxxx xxxx */
-	DECODE_REJECT	(0xfe00, 0xde00),
-
-	/* Conditional branch		1101 xxxx xxxx xxxx */
-	DECODE_CUSTOM	(0xf000, 0xd000, t16_decode_cond_branch),
-
-	/*
-	 * Unconditional branch
-	 * B				1110 0xxx xxxx xxxx
-	 */
-	DECODE_SIMULATE	(0xf800, 0xe000, t16_simulate_branch),
-
-	DECODE_END
+const union decode_action kprobes_t32_actions[NUM_PROBES_T32_ACTIONS] = {
+	[PROBES_T32_LDMSTM] = {.decoder = t32_decode_ldmstm},
+	[PROBES_T32_LDRDSTRD] = {.handler = t32_emulate_ldrdstrd},
+	[PROBES_T32_TABLE_BRANCH] = {.handler = t32_simulate_table_branch},
+	[PROBES_T32_TST] = {.handler = t32_emulate_rd8rn16rm0_rwflags},
+	[PROBES_T32_MOV] = {.handler = t32_emulate_rd8rn16rm0_rwflags},
+	[PROBES_T32_ADDSUB] = {.handler = t32_emulate_rd8rn16rm0_rwflags},
+	[PROBES_T32_LOGICAL] = {.handler = t32_emulate_rd8rn16rm0_rwflags},
+	[PROBES_T32_CMP] = {.handler = t32_emulate_rd8rn16rm0_rwflags},
+	[PROBES_T32_ADDWSUBW_PC] = {.handler = t32_emulate_rd8pc16_noflags,},
+	[PROBES_T32_ADDWSUBW] = {.handler = t32_emulate_rd8rn16_noflags},
+	[PROBES_T32_MOVW] = {.handler = t32_emulate_rd8rn16_noflags},
+	[PROBES_T32_SAT] = {.handler = t32_emulate_rd8rn16rm0_rwflags},
+	[PROBES_T32_BITFIELD] = {.handler = t32_emulate_rd8rn16_noflags},
+	[PROBES_T32_SEV] = {.handler = probes_emulate_none},
+	[PROBES_T32_WFE] = {.handler = probes_simulate_nop},
+	[PROBES_T32_MRS] = {.handler = t32_simulate_mrs},
+	[PROBES_T32_BRANCH_COND] = {.decoder = t32_decode_cond_branch},
+	[PROBES_T32_BRANCH] = {.handler = t32_simulate_branch},
+	[PROBES_T32_PLDI] = {.handler = probes_simulate_nop},
+	[PROBES_T32_LDR_LIT] = {.handler = t32_simulate_ldr_literal},
+	[PROBES_T32_LDRSTR] = {.handler = t32_emulate_ldrstr},
+	[PROBES_T32_SIGN_EXTEND] = {.handler = t32_emulate_rd8rn16rm0_rwflags},
+	[PROBES_T32_MEDIA] = {.handler = t32_emulate_rd8rn16rm0_rwflags},
+	[PROBES_T32_REVERSE] = {.handler = t32_emulate_rd8rn16_noflags},
+	[PROBES_T32_MUL_ADD] = {.handler = t32_emulate_rd8rn16rm0_rwflags},
+	[PROBES_T32_MUL_ADD2] = {.handler = t32_emulate_rd8rn16rm0ra12_noflags},
+	[PROBES_T32_MUL_ADD_LONG] = {
+		.handler = t32_emulate_rdlo12rdhi8rn16rm0_noflags},
 };
-#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
-EXPORT_SYMBOL_GPL(kprobe_decode_thumb16_table);
-#endif
-
-static unsigned long __kprobes thumb_check_cc(unsigned long cpsr)
-{
-	if (unlikely(in_it_block(cpsr)))
-		return kprobe_condition_checks[current_cond(cpsr)](cpsr);
-	return true;
-}
-
-static void __kprobes thumb16_singlestep(struct kprobe *p, struct pt_regs *regs)
-{
-	regs->ARM_pc += 2;
-	p->ainsn.insn_handler(p, regs);
-	regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
-}
-
-static void __kprobes thumb32_singlestep(struct kprobe *p, struct pt_regs *regs)
-{
-	regs->ARM_pc += 4;
-	p->ainsn.insn_handler(p, regs);
-	regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
-}
-
-enum kprobe_insn __kprobes
-thumb16_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	asi->insn_singlestep = thumb16_singlestep;
-	asi->insn_check_cc = thumb_check_cc;
-	return kprobe_decode_insn(insn, asi, kprobe_decode_thumb16_table, true);
-}
-
-enum kprobe_insn __kprobes
-thumb32_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	asi->insn_singlestep = thumb32_singlestep;
-	asi->insn_check_cc = thumb_check_cc;
-	return kprobe_decode_insn(insn, asi, kprobe_decode_thumb32_table, true);
-}
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index a7b621ece23d..6d644202c8dc 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -26,9 +26,14 @@
 #include <linux/stop_machine.h>
 #include <linux/stringify.h>
 #include <asm/traps.h>
+#include <asm/opcodes.h>
 #include <asm/cacheflush.h>
+#include <linux/percpu.h>
+#include <linux/bug.h>
 
 #include "kprobes.h"
+#include "probes-arm.h"
+#include "probes-thumb.h"
 #include "patch.h"
 
 #define MIN_STACK_SIZE(addr) 				\
@@ -54,6 +59,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 	unsigned long addr = (unsigned long)p->addr;
 	bool thumb;
 	kprobe_decode_insn_t *decode_insn;
+	const union decode_action *actions;
 	int is;
 
 	if (in_exception_text(addr))
@@ -62,25 +68,29 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 #ifdef CONFIG_THUMB2_KERNEL
 	thumb = true;
 	addr &= ~1; /* Bit 0 would normally be set to indicate Thumb code */
-	insn = ((u16 *)addr)[0];
+	insn = __mem_to_opcode_thumb16(((u16 *)addr)[0]);
 	if (is_wide_instruction(insn)) {
-		insn <<= 16;
-		insn |= ((u16 *)addr)[1];
-		decode_insn = thumb32_kprobe_decode_insn;
-	} else
-		decode_insn = thumb16_kprobe_decode_insn;
+		u16 inst2 = __mem_to_opcode_thumb16(((u16 *)addr)[1]);
+		insn = __opcode_thumb32_compose(insn, inst2);
+		decode_insn = thumb32_probes_decode_insn;
+		actions = kprobes_t32_actions;
+	} else {
+		decode_insn = thumb16_probes_decode_insn;
+		actions = kprobes_t16_actions;
+	}
 #else /* !CONFIG_THUMB2_KERNEL */
 	thumb = false;
 	if (addr & 0x3)
 		return -EINVAL;
-	insn = *p->addr;
-	decode_insn = arm_kprobe_decode_insn;
+	insn = __mem_to_opcode_arm(*p->addr);
+	decode_insn = arm_probes_decode_insn;
+	actions = kprobes_arm_actions;
 #endif
 
 	p->opcode = insn;
 	p->ainsn.insn = tmp_insn;
 
-	switch ((*decode_insn)(insn, &p->ainsn)) {
+	switch ((*decode_insn)(insn, &p->ainsn, true, actions)) {
 	case INSN_REJECTED:	/* not supported */
 		return -EINVAL;
 
@@ -92,7 +102,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 			p->ainsn.insn[is] = tmp_insn[is];
 		flush_insns(p->ainsn.insn,
 				sizeof(p->ainsn.insn[0]) * MAX_INSN_SIZE);
-		p->ainsn.insn_fn = (kprobe_insn_fn_t *)
+		p->ainsn.insn_fn = (probes_insn_fn_t *)
 					((uintptr_t)p->ainsn.insn | thumb);
 		break;
 
@@ -197,7 +207,7 @@ singlestep_skip(struct kprobe *p, struct pt_regs *regs)
 static inline void __kprobes
 singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb)
 {
-	p->ainsn.insn_singlestep(p, regs);
+	p->ainsn.insn_singlestep(p->opcode, &p->ainsn, regs);
 }
 
 /*
@@ -607,7 +617,7 @@ static struct undef_hook kprobes_arm_break_hook = {
 
 int __init arch_init_kprobes()
 {
-	arm_kprobe_decode_init();
+	arm_probes_decode_init();
 #ifdef CONFIG_THUMB2_KERNEL
 	register_undef_hook(&kprobes_thumb16_break_hook);
 	register_undef_hook(&kprobes_thumb32_break_hook);
diff --git a/arch/arm/kernel/kprobes.h b/arch/arm/kernel/kprobes.h
index 38945f78f9f1..9a2712ecefc3 100644
--- a/arch/arm/kernel/kprobes.h
+++ b/arch/arm/kernel/kprobes.h
@@ -19,6 +19,8 @@
 #ifndef _ARM_KERNEL_KPROBES_H
 #define _ARM_KERNEL_KPROBES_H
 
+#include "probes.h"
+
 /*
  * These undefined instructions must be unique and
  * reserved solely for kprobes' use.
@@ -27,402 +29,24 @@
 #define KPROBE_THUMB16_BREAKPOINT_INSTRUCTION	0xde18
 #define KPROBE_THUMB32_BREAKPOINT_INSTRUCTION	0xf7f0a018
 
+enum probes_insn __kprobes
+kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_probes_insn *asi,
+		const struct decode_header *h);
 
-enum kprobe_insn {
-	INSN_REJECTED,
-	INSN_GOOD,
-	INSN_GOOD_NO_SLOT
-};
-
-typedef enum kprobe_insn (kprobe_decode_insn_t)(kprobe_opcode_t,
-						struct arch_specific_insn *);
+typedef enum probes_insn (kprobe_decode_insn_t)(probes_opcode_t,
+						struct arch_probes_insn *,
+						bool,
+						const union decode_action *);
 
 #ifdef CONFIG_THUMB2_KERNEL
 
-enum kprobe_insn thumb16_kprobe_decode_insn(kprobe_opcode_t,
-						struct arch_specific_insn *);
-enum kprobe_insn thumb32_kprobe_decode_insn(kprobe_opcode_t,
-						struct arch_specific_insn *);
+extern const union decode_action kprobes_t32_actions[];
+extern const union decode_action kprobes_t16_actions[];
 
 #else /* !CONFIG_THUMB2_KERNEL */
 
-enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t,
-					struct arch_specific_insn *);
-#endif
-
-void __init arm_kprobe_decode_init(void);
-
-extern kprobe_check_cc * const kprobe_condition_checks[16];
-
-
-#if __LINUX_ARM_ARCH__ >= 7
-
-/* str_pc_offset is architecturally defined from ARMv7 onwards */
-#define str_pc_offset 8
-#define find_str_pc_offset()
-
-#else /* __LINUX_ARM_ARCH__ < 7 */
-
-/* We need a run-time check to determine str_pc_offset */
-extern int str_pc_offset;
-void __init find_str_pc_offset(void);
+extern const union decode_action kprobes_arm_actions[];
 
 #endif
 
-
-/*
- * Update ITSTATE after normal execution of an IT block instruction.
- *
- * The 8 IT state bits are split into two parts in CPSR:
- *	ITSTATE<1:0> are in CPSR<26:25>
- *	ITSTATE<7:2> are in CPSR<15:10>
- */
-static inline unsigned long it_advance(unsigned long cpsr)
-	{
-	if ((cpsr & 0x06000400) == 0) {
-		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
-		cpsr &= ~PSR_IT_MASK;
-	} else {
-		/* We need to shift left ITSTATE<4:0> */
-		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
-		unsigned long it = cpsr & mask;
-		it <<= 1;
-		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
-		it &= mask;
-		cpsr &= ~mask;
-		cpsr |= it;
-	}
-	return cpsr;
-}
-
-static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
-{
-	long cpsr = regs->ARM_cpsr;
-	if (pcv & 0x1) {
-		cpsr |= PSR_T_BIT;
-		pcv &= ~0x1;
-	} else {
-		cpsr &= ~PSR_T_BIT;
-		pcv &= ~0x2;	/* Avoid UNPREDICTABLE address allignment */
-	}
-	regs->ARM_cpsr = cpsr;
-	regs->ARM_pc = pcv;
-}
-
-
-#if __LINUX_ARM_ARCH__ >= 6
-
-/* Kernels built for >= ARMv6 should never run on <= ARMv5 hardware, so... */
-#define load_write_pc_interworks true
-#define test_load_write_pc_interworking()
-
-#else /* __LINUX_ARM_ARCH__ < 6 */
-
-/* We need run-time testing to determine if load_write_pc() should interwork. */
-extern bool load_write_pc_interworks;
-void __init test_load_write_pc_interworking(void);
-
-#endif
-
-static inline void __kprobes load_write_pc(long pcv, struct pt_regs *regs)
-{
-	if (load_write_pc_interworks)
-		bx_write_pc(pcv, regs);
-	else
-		regs->ARM_pc = pcv;
-}
-
-
-#if __LINUX_ARM_ARCH__ >= 7
-
-#define alu_write_pc_interworks true
-#define test_alu_write_pc_interworking()
-
-#elif __LINUX_ARM_ARCH__ <= 5
-
-/* Kernels built for <= ARMv5 should never run on >= ARMv6 hardware, so... */
-#define alu_write_pc_interworks false
-#define test_alu_write_pc_interworking()
-
-#else /* __LINUX_ARM_ARCH__ == 6 */
-
-/* We could be an ARMv6 binary on ARMv7 hardware so we need a run-time check. */
-extern bool alu_write_pc_interworks;
-void __init test_alu_write_pc_interworking(void);
-
-#endif /* __LINUX_ARM_ARCH__ == 6 */
-
-static inline void __kprobes alu_write_pc(long pcv, struct pt_regs *regs)
-{
-	if (alu_write_pc_interworks)
-		bx_write_pc(pcv, regs);
-	else
-		regs->ARM_pc = pcv;
-}
-
-
-void __kprobes kprobe_simulate_nop(struct kprobe *p, struct pt_regs *regs);
-void __kprobes kprobe_emulate_none(struct kprobe *p, struct pt_regs *regs);
-
-enum kprobe_insn __kprobes
-kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi);
-
-/*
- * Test if load/store instructions writeback the address register.
- * if P (bit 24) == 0 or W (bit 21) == 1
- */
-#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000)
-
-/*
- * The following definitions and macros are used to build instruction
- * decoding tables for use by kprobe_decode_insn.
- *
- * These tables are a concatenation of entries each of which consist of one of
- * the decode_* structs. All of the fields in every type of decode structure
- * are of the union type decode_item, therefore the entire decode table can be
- * viewed as an array of these and declared like:
- *
- *	static const union decode_item table_name[] = {};
- *
- * In order to construct each entry in the table, macros are used to
- * initialise a number of sequential decode_item values in a layout which
- * matches the relevant struct. E.g. DECODE_SIMULATE initialise a struct
- * decode_simulate by initialising four decode_item objects like this...
- *
- *	{.bits = _type},
- *	{.bits = _mask},
- *	{.bits = _value},
- *	{.handler = _handler},
- *
- * Initialising a specified member of the union means that the compiler
- * will produce a warning if the argument is of an incorrect type.
- *
- * Below is a list of each of the macros used to initialise entries and a
- * description of the action performed when that entry is matched to an
- * instruction. A match is found when (instruction & mask) == value.
- *
- * DECODE_TABLE(mask, value, table)
- *	Instruction decoding jumps to parsing the new sub-table 'table'.
- *
- * DECODE_CUSTOM(mask, value, decoder)
- *	The custom function 'decoder' is called to the complete decoding
- *	of an instruction.
- *
- * DECODE_SIMULATE(mask, value, handler)
- *	Set the probes instruction handler to 'handler', this will be used
- *	to simulate the instruction when the probe is hit. Decoding returns
- *	with INSN_GOOD_NO_SLOT.
- *
- * DECODE_EMULATE(mask, value, handler)
- *	Set the probes instruction handler to 'handler', this will be used
- *	to emulate the instruction when the probe is hit. The modified
- *	instruction (see below) is placed in the probes instruction slot so it
- *	may be called by the emulation code. Decoding returns with INSN_GOOD.
- *
- * DECODE_REJECT(mask, value)
- *	Instruction decoding fails with INSN_REJECTED
- *
- * DECODE_OR(mask, value)
- *	This allows the mask/value test of multiple table entries to be
- *	logically ORed. Once an 'or' entry is matched the decoding action to
- *	be performed is that of the next entry which isn't an 'or'. E.g.
- *
- *		DECODE_OR	(mask1, value1)
- *		DECODE_OR	(mask2, value2)
- *		DECODE_SIMULATE	(mask3, value3, simulation_handler)
- *
- *	This means that if any of the three mask/value pairs match the
- *	instruction being decoded, then 'simulation_handler' will be used
- *	for it.
- *
- * Both the SIMULATE and EMULATE macros have a second form which take an
- * additional 'regs' argument.
- *
- *	DECODE_SIMULATEX(mask, value, handler, regs)
- *	DECODE_EMULATEX	(mask, value, handler, regs)
- *
- * These are used to specify what kind of CPU register is encoded in each of the
- * least significant 5 nibbles of the instruction being decoded. The regs value
- * is specified using the REGS macro, this takes any of the REG_TYPE_* values
- * from enum decode_reg_type as arguments; only the '*' part of the name is
- * given. E.g.
- *
- *	REGS(0, ANY, NOPC, 0, ANY)
- *
- * This indicates an instruction is encoded like:
- *
- *	bits 19..16	ignore
- *	bits 15..12	any register allowed here
- *	bits 11.. 8	any register except PC allowed here
- *	bits  7.. 4	ignore
- *	bits  3.. 0	any register allowed here
- *
- * This register specification is checked after a decode table entry is found to
- * match an instruction (through the mask/value test). Any invalid register then
- * found in the instruction will cause decoding to fail with INSN_REJECTED. In
- * the above example this would happen if bits 11..8 of the instruction were
- * 1111, indicating R15 or PC.
- *
- * As well as checking for legal combinations of registers, this data is also
- * used to modify the registers encoded in the instructions so that an
- * emulation routines can use it. (See decode_regs() and INSN_NEW_BITS.)
- *
- * Here is a real example which matches ARM instructions of the form
- * "AND <Rd>,<Rn>,<Rm>,<shift> <Rs>"
- *
- *	DECODE_EMULATEX	(0x0e000090, 0x00000010, emulate_rd12rn16rm0rs8_rwflags,
- *						 REGS(ANY, ANY, NOPC, 0, ANY)),
- *						      ^    ^    ^        ^
- *						      Rn   Rd   Rs       Rm
- *
- * Decoding the instruction "AND R4, R5, R6, ASL R15" will be rejected because
- * Rs == R15
- *
- * Decoding the instruction "AND R4, R5, R6, ASL R7" will be accepted and the
- * instruction will be modified to "AND R0, R2, R3, ASL R1" and then placed into
- * the kprobes instruction slot. This can then be called later by the handler
- * function emulate_rd12rn16rm0rs8_rwflags in order to simulate the instruction.
- */
-
-enum decode_type {
-	DECODE_TYPE_END,
-	DECODE_TYPE_TABLE,
-	DECODE_TYPE_CUSTOM,
-	DECODE_TYPE_SIMULATE,
-	DECODE_TYPE_EMULATE,
-	DECODE_TYPE_OR,
-	DECODE_TYPE_REJECT,
-	NUM_DECODE_TYPES /* Must be last enum */
-};
-
-#define DECODE_TYPE_BITS	4
-#define DECODE_TYPE_MASK	((1 << DECODE_TYPE_BITS) - 1)
-
-enum decode_reg_type {
-	REG_TYPE_NONE = 0, /* Not a register, ignore */
-	REG_TYPE_ANY,	   /* Any register allowed */
-	REG_TYPE_SAMEAS16, /* Register should be same as that at bits 19..16 */
-	REG_TYPE_SP,	   /* Register must be SP */
-	REG_TYPE_PC,	   /* Register must be PC */
-	REG_TYPE_NOSP,	   /* Register must not be SP */
-	REG_TYPE_NOSPPC,   /* Register must not be SP or PC */
-	REG_TYPE_NOPC,	   /* Register must not be PC */
-	REG_TYPE_NOPCWB,   /* No PC if load/store write-back flag also set */
-
-	/* The following types are used when the encoding for PC indicates
-	 * another instruction form. This distiction only matters for test
-	 * case coverage checks.
-	 */
-	REG_TYPE_NOPCX,	   /* Register must not be PC */
-	REG_TYPE_NOSPPCX,  /* Register must not be SP or PC */
-
-	/* Alias to allow '0' arg to be used in REGS macro. */
-	REG_TYPE_0 = REG_TYPE_NONE
-};
-
-#define REGS(r16, r12, r8, r4, r0)	\
-	((REG_TYPE_##r16) << 16) +	\
-	((REG_TYPE_##r12) << 12) +	\
-	((REG_TYPE_##r8) << 8) +	\
-	((REG_TYPE_##r4) << 4) +	\
-	(REG_TYPE_##r0)
-
-union decode_item {
-	u32			bits;
-	const union decode_item	*table;
-	kprobe_insn_handler_t	*handler;
-	kprobe_decode_insn_t	*decoder;
-};
-
-
-#define DECODE_END			\
-	{.bits = DECODE_TYPE_END}
-
-
-struct decode_header {
-	union decode_item	type_regs;
-	union decode_item	mask;
-	union decode_item	value;
-};
-
-#define DECODE_HEADER(_type, _mask, _value, _regs)		\
-	{.bits = (_type) | ((_regs) << DECODE_TYPE_BITS)},	\
-	{.bits = (_mask)},					\
-	{.bits = (_value)}
-
-
-struct decode_table {
-	struct decode_header	header;
-	union decode_item	table;
-};
-
-#define DECODE_TABLE(_mask, _value, _table)			\
-	DECODE_HEADER(DECODE_TYPE_TABLE, _mask, _value, 0),	\
-	{.table = (_table)}
-
-
-struct decode_custom {
-	struct decode_header	header;
-	union decode_item	decoder;
-};
-
-#define DECODE_CUSTOM(_mask, _value, _decoder)			\
-	DECODE_HEADER(DECODE_TYPE_CUSTOM, _mask, _value, 0),	\
-	{.decoder = (_decoder)}
-
-
-struct decode_simulate {
-	struct decode_header	header;
-	union decode_item	handler;
-};
-
-#define DECODE_SIMULATEX(_mask, _value, _handler, _regs)		\
-	DECODE_HEADER(DECODE_TYPE_SIMULATE, _mask, _value, _regs),	\
-	{.handler = (_handler)}
-
-#define DECODE_SIMULATE(_mask, _value, _handler)	\
-	DECODE_SIMULATEX(_mask, _value, _handler, 0)
-
-
-struct decode_emulate {
-	struct decode_header	header;
-	union decode_item	handler;
-};
-
-#define DECODE_EMULATEX(_mask, _value, _handler, _regs)			\
-	DECODE_HEADER(DECODE_TYPE_EMULATE, _mask, _value, _regs),	\
-	{.handler = (_handler)}
-
-#define DECODE_EMULATE(_mask, _value, _handler)		\
-	DECODE_EMULATEX(_mask, _value, _handler, 0)
-
-
-struct decode_or {
-	struct decode_header	header;
-};
-
-#define DECODE_OR(_mask, _value)				\
-	DECODE_HEADER(DECODE_TYPE_OR, _mask, _value, 0)
-
-
-struct decode_reject {
-	struct decode_header	header;
-};
-
-#define DECODE_REJECT(_mask, _value)				\
-	DECODE_HEADER(DECODE_TYPE_REJECT, _mask, _value, 0)
-
-
-#ifdef CONFIG_THUMB2_KERNEL
-extern const union decode_item kprobe_decode_thumb16_table[];
-extern const union decode_item kprobe_decode_thumb32_table[];
-#else
-extern const union decode_item kprobe_decode_arm_table[];
-#endif
-
-
-int kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
-			const union decode_item *table, bool thumb16);
-
-
 #endif /* _ARM_KERNEL_KPROBES_H */
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index f0d180d8b29f..8cf0996aa1a8 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -184,3 +184,10 @@ void machine_kexec(struct kimage *image)
 
 	soft_restart(reboot_entry_phys);
 }
+
+void arch_crash_save_vmcoreinfo(void)
+{
+#ifdef CONFIG_ARM_LPAE
+	VMCOREINFO_CONFIG(ARM_LPAE);
+#endif
+}
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 789d846a9184..a6bc431cde70 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -16,6 +16,8 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/uaccess.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
 
 #include <asm/irq_regs.h>
 #include <asm/pmu.h>
@@ -205,6 +207,8 @@ armpmu_del(struct perf_event *event, int flags)
 	armpmu_stop(event, PERF_EF_UPDATE);
 	hw_events->events[idx] = NULL;
 	clear_bit(idx, hw_events->used_mask);
+	if (armpmu->clear_event_idx)
+		armpmu->clear_event_idx(hw_events, event);
 
 	perf_event_update_userpage(event);
 }
@@ -295,14 +299,27 @@ validate_group(struct perf_event *event)
 
 static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
 {
-	struct arm_pmu *armpmu = (struct arm_pmu *) dev;
-	struct platform_device *plat_device = armpmu->plat_device;
-	struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev);
+	struct arm_pmu *armpmu;
+	struct platform_device *plat_device;
+	struct arm_pmu_platdata *plat;
+	int ret;
+	u64 start_clock, finish_clock;
 
+	if (irq_is_percpu(irq))
+		dev = *(void **)dev;
+	armpmu = dev;
+	plat_device = armpmu->plat_device;
+	plat = dev_get_platdata(&plat_device->dev);
+
+	start_clock = sched_clock();
 	if (plat && plat->handle_irq)
-		return plat->handle_irq(irq, dev, armpmu->handle_irq);
+		ret = plat->handle_irq(irq, dev, armpmu->handle_irq);
 	else
-		return armpmu->handle_irq(irq, dev);
+		ret = armpmu->handle_irq(irq, dev);
+	finish_clock = sched_clock();
+
+	perf_sample_event_took(finish_clock - start_clock);
+	return ret;
 }
 
 static void
diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c
index 20d553c9f5e2..a71ae1523620 100644
--- a/arch/arm/kernel/perf_event_cpu.c
+++ b/arch/arm/kernel/perf_event_cpu.c
@@ -25,6 +25,8 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
 
 #include <asm/cputype.h>
 #include <asm/irq_regs.h>
@@ -33,6 +35,7 @@
 /* Set at runtime when we know what CPU type we are. */
 static struct arm_pmu *cpu_pmu;
 
+static DEFINE_PER_CPU(struct arm_pmu *, percpu_pmu);
 static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
 static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
 static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
@@ -71,6 +74,26 @@ static struct pmu_hw_events *cpu_pmu_get_cpu_events(void)
 	return this_cpu_ptr(&cpu_hw_events);
 }
 
+static void cpu_pmu_enable_percpu_irq(void *data)
+{
+	struct arm_pmu *cpu_pmu = data;
+	struct platform_device *pmu_device = cpu_pmu->plat_device;
+	int irq = platform_get_irq(pmu_device, 0);
+
+	enable_percpu_irq(irq, IRQ_TYPE_NONE);
+	cpumask_set_cpu(smp_processor_id(), &cpu_pmu->active_irqs);
+}
+
+static void cpu_pmu_disable_percpu_irq(void *data)
+{
+	struct arm_pmu *cpu_pmu = data;
+	struct platform_device *pmu_device = cpu_pmu->plat_device;
+	int irq = platform_get_irq(pmu_device, 0);
+
+	cpumask_clear_cpu(smp_processor_id(), &cpu_pmu->active_irqs);
+	disable_percpu_irq(irq);
+}
+
 static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu)
 {
 	int i, irq, irqs;
@@ -78,12 +101,18 @@ static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu)
 
 	irqs = min(pmu_device->num_resources, num_possible_cpus());
 
-	for (i = 0; i < irqs; ++i) {
-		if (!cpumask_test_and_clear_cpu(i, &cpu_pmu->active_irqs))
-			continue;
-		irq = platform_get_irq(pmu_device, i);
-		if (irq >= 0)
-			free_irq(irq, cpu_pmu);
+	irq = platform_get_irq(pmu_device, 0);
+	if (irq >= 0 && irq_is_percpu(irq)) {
+		on_each_cpu(cpu_pmu_disable_percpu_irq, cpu_pmu, 1);
+		free_percpu_irq(irq, &percpu_pmu);
+	} else {
+		for (i = 0; i < irqs; ++i) {
+			if (!cpumask_test_and_clear_cpu(i, &cpu_pmu->active_irqs))
+				continue;
+			irq = platform_get_irq(pmu_device, i);
+			if (irq >= 0)
+				free_irq(irq, cpu_pmu);
+		}
 	}
 }
 
@@ -101,33 +130,44 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
 		return -ENODEV;
 	}
 
-	for (i = 0; i < irqs; ++i) {
-		err = 0;
-		irq = platform_get_irq(pmu_device, i);
-		if (irq < 0)
-			continue;
-
-		/*
-		 * If we have a single PMU interrupt that we can't shift,
-		 * assume that we're running on a uniprocessor machine and
-		 * continue. Otherwise, continue without this interrupt.
-		 */
-		if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
-			pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
-				    irq, i);
-			continue;
-		}
-
-		err = request_irq(irq, handler,
-				  IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu",
-				  cpu_pmu);
+	irq = platform_get_irq(pmu_device, 0);
+	if (irq >= 0 && irq_is_percpu(irq)) {
+		err = request_percpu_irq(irq, handler, "arm-pmu", &percpu_pmu);
 		if (err) {
 			pr_err("unable to request IRQ%d for ARM PMU counters\n",
 				irq);
 			return err;
 		}
-
-		cpumask_set_cpu(i, &cpu_pmu->active_irqs);
+		on_each_cpu(cpu_pmu_enable_percpu_irq, cpu_pmu, 1);
+	} else {
+		for (i = 0; i < irqs; ++i) {
+			err = 0;
+			irq = platform_get_irq(pmu_device, i);
+			if (irq < 0)
+				continue;
+
+			/*
+			 * If we have a single PMU interrupt that we can't shift,
+			 * assume that we're running on a uniprocessor machine and
+			 * continue. Otherwise, continue without this interrupt.
+			 */
+			if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
+				pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+					    irq, i);
+				continue;
+			}
+
+			err = request_irq(irq, handler,
+					  IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu",
+					  cpu_pmu);
+			if (err) {
+				pr_err("unable to request IRQ%d for ARM PMU counters\n",
+					irq);
+				return err;
+			}
+
+			cpumask_set_cpu(i, &cpu_pmu->active_irqs);
+		}
 	}
 
 	return 0;
@@ -141,6 +181,7 @@ static void cpu_pmu_init(struct arm_pmu *cpu_pmu)
 		events->events = per_cpu(hw_events, cpu);
 		events->used_mask = per_cpu(used_mask, cpu);
 		raw_spin_lock_init(&events->pmu_lock);
+		per_cpu(percpu_pmu, cpu) = cpu_pmu;
 	}
 
 	cpu_pmu->get_hw_events	= cpu_pmu_get_cpu_events;
@@ -180,7 +221,9 @@ static struct notifier_block cpu_pmu_hotplug_notifier = {
  * PMU platform driver and devicetree bindings.
  */
 static struct of_device_id cpu_pmu_of_device_ids[] = {
+	{.compatible = "arm,cortex-a17-pmu",	.data = armv7_a17_pmu_init},
 	{.compatible = "arm,cortex-a15-pmu",	.data = armv7_a15_pmu_init},
+	{.compatible = "arm,cortex-a12-pmu",	.data = armv7_a12_pmu_init},
 	{.compatible = "arm,cortex-a9-pmu",	.data = armv7_a9_pmu_init},
 	{.compatible = "arm,cortex-a8-pmu",	.data = armv7_a8_pmu_init},
 	{.compatible = "arm,cortex-a7-pmu",	.data = armv7_a7_pmu_init},
@@ -188,6 +231,7 @@ static struct of_device_id cpu_pmu_of_device_ids[] = {
 	{.compatible = "arm,arm11mpcore-pmu",	.data = armv6mpcore_pmu_init},
 	{.compatible = "arm,arm1176-pmu",	.data = armv6pmu_init},
 	{.compatible = "arm,arm1136-pmu",	.data = armv6pmu_init},
+	{.compatible = "qcom,krait-pmu",	.data = krait_pmu_init},
 	{},
 };
 
@@ -225,15 +269,6 @@ static int probe_current_pmu(struct arm_pmu *pmu)
 		case ARM_CPU_PART_CORTEX_A9:
 			ret = armv7_a9_pmu_init(pmu);
 			break;
-		case ARM_CPU_PART_CORTEX_A5:
-			ret = armv7_a5_pmu_init(pmu);
-			break;
-		case ARM_CPU_PART_CORTEX_A15:
-			ret = armv7_a15_pmu_init(pmu);
-			break;
-		case ARM_CPU_PART_CORTEX_A7:
-			ret = armv7_a7_pmu_init(pmu);
-			break;
 		}
 	/* Intel CPUs [xscale]. */
 	} else if (implementor == ARM_CPU_IMP_INTEL) {
@@ -270,6 +305,9 @@ static int cpu_pmu_device_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	cpu_pmu = pmu;
+	cpu_pmu->plat_device = pdev;
+
 	if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) {
 		init_fn = of_id->data;
 		ret = init_fn(pmu);
@@ -282,8 +320,6 @@ static int cpu_pmu_device_probe(struct platform_device *pdev)
 		goto out_free;
 	}
 
-	cpu_pmu = pmu;
-	cpu_pmu->plat_device = pdev;
 	cpu_pmu_init(cpu_pmu);
 	ret = armpmu_register(cpu_pmu, PERF_TYPE_RAW);
 
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 039cffb053a7..2037f7205987 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -18,6 +18,10 @@
 
 #ifdef CONFIG_CPU_V7
 
+#include <asm/cp15.h>
+#include <asm/vfp.h>
+#include "../vfp/vfpinstr.h"
+
 /*
  * Common ARMv7 event types
  *
@@ -109,6 +113,33 @@ enum armv7_a15_perf_types {
 	ARMV7_A15_PERFCTR_PC_WRITE_SPEC			= 0x76,
 };
 
+/* ARMv7 Cortex-A12 specific event types */
+enum armv7_a12_perf_types {
+	ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ		= 0x40,
+	ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE	= 0x41,
+
+	ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ		= 0x50,
+	ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE		= 0x51,
+
+	ARMV7_A12_PERFCTR_PC_WRITE_SPEC			= 0x76,
+
+	ARMV7_A12_PERFCTR_PF_TLB_REFILL			= 0xe7,
+};
+
+/* ARMv7 Krait specific event types */
+enum krait_perf_types {
+	KRAIT_PMRESR0_GROUP0				= 0xcc,
+	KRAIT_PMRESR1_GROUP0				= 0xd0,
+	KRAIT_PMRESR2_GROUP0				= 0xd4,
+	KRAIT_VPMRESR0_GROUP0				= 0xd8,
+
+	KRAIT_PERFCTR_L1_ICACHE_ACCESS			= 0x10011,
+	KRAIT_PERFCTR_L1_ICACHE_MISS			= 0x10010,
+
+	KRAIT_PERFCTR_L1_ITLB_ACCESS			= 0x12222,
+	KRAIT_PERFCTR_L1_DTLB_ACCESS			= 0x12210,
+};
+
 /*
  * Cortex-A8 HW events mapping
  *
@@ -732,6 +763,262 @@ static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 };
 
 /*
+ * Cortex-A12 HW events mapping
+ */
+static const unsigned armv7_a12_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_A12_PERFCTR_PC_WRITE_SPEC,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]		= ARMV7_PERFCTR_BUS_CYCLES,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv7_a12_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					[PERF_COUNT_HW_CACHE_OP_MAX]
+					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		/*
+		 * Not all performance counters differentiate between read
+		 * and write accesses/misses so we're not always strictly
+		 * correct, but it's the best we can do. Writes and reads get
+		 * combined in these cases.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACHE_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_A12_PERFCTR_PF_TLB_REFILL,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+/*
+ * Krait HW events mapping
+ */
+static const unsigned krait_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned krait_perf_map_no_branch[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned krait_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					  [PERF_COUNT_HW_CACHE_OP_MAX]
+					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		/*
+		 * The performance counters don't differentiate between read
+		 * and write accesses/misses so this isn't strictly correct,
+		 * but it's the best we can do. Writes and reads get
+		 * combined.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= KRAIT_PERFCTR_L1_ICACHE_ACCESS,
+			[C(RESULT_MISS)]	= KRAIT_PERFCTR_L1_ICACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= KRAIT_PERFCTR_L1_DTLB_ACCESS,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= KRAIT_PERFCTR_L1_DTLB_ACCESS,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= KRAIT_PERFCTR_L1_ITLB_ACCESS,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= KRAIT_PERFCTR_L1_ITLB_ACCESS,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+/*
  * Perf Events' indices
  */
 #define	ARMV7_IDX_CYCLE_COUNTER	0
@@ -1212,6 +1499,24 @@ static int armv7_a7_map_event(struct perf_event *event)
 				&armv7_a7_perf_cache_map, 0xFF);
 }
 
+static int armv7_a12_map_event(struct perf_event *event)
+{
+	return armpmu_map_event(event, &armv7_a12_perf_map,
+				&armv7_a12_perf_cache_map, 0xFF);
+}
+
+static int krait_map_event(struct perf_event *event)
+{
+	return armpmu_map_event(event, &krait_perf_map,
+				&krait_perf_cache_map, 0xFFFFF);
+}
+
+static int krait_map_event_no_branch(struct perf_event *event)
+{
+	return armpmu_map_event(event, &krait_perf_map_no_branch,
+				&krait_perf_cache_map, 0xFFFFF);
+}
+
 static void armv7pmu_init(struct arm_pmu *cpu_pmu)
 {
 	cpu_pmu->handle_irq	= armv7pmu_handle_irq;
@@ -1283,6 +1588,415 @@ static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
 	return 0;
 }
+
+static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu)
+{
+	armv7pmu_init(cpu_pmu);
+	cpu_pmu->name		= "ARMv7 Cortex-A12";
+	cpu_pmu->map_event	= armv7_a12_map_event;
+	cpu_pmu->num_events	= armv7_read_num_pmnc_events();
+	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
+	return 0;
+}
+
+static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu)
+{
+	armv7_a12_pmu_init(cpu_pmu);
+	cpu_pmu->name = "ARMv7 Cortex-A17";
+	return 0;
+}
+
+/*
+ * Krait Performance Monitor Region Event Selection Register (PMRESRn)
+ *
+ *            31   30     24     16     8      0
+ *            +--------------------------------+
+ *  PMRESR0   | EN |  CC  |  CC  |  CC  |  CC  |   N = 1, R = 0
+ *            +--------------------------------+
+ *  PMRESR1   | EN |  CC  |  CC  |  CC  |  CC  |   N = 1, R = 1
+ *            +--------------------------------+
+ *  PMRESR2   | EN |  CC  |  CC  |  CC  |  CC  |   N = 1, R = 2
+ *            +--------------------------------+
+ *  VPMRESR0  | EN |  CC  |  CC  |  CC  |  CC  |   N = 2, R = ?
+ *            +--------------------------------+
+ *              EN | G=3  | G=2  | G=1  | G=0
+ *
+ *  Event Encoding:
+ *
+ *      hwc->config_base = 0xNRCCG
+ *
+ *      N  = prefix, 1 for Krait CPU (PMRESRn), 2 for Venum VFP (VPMRESR)
+ *      R  = region register
+ *      CC = class of events the group G is choosing from
+ *      G  = group or particular event
+ *
+ *  Example: 0x12021 is a Krait CPU event in PMRESR2's group 1 with code 2
+ *
+ *  A region (R) corresponds to a piece of the CPU (execution unit, instruction
+ *  unit, etc.) while the event code (CC) corresponds to a particular class of
+ *  events (interrupts for example). An event code is broken down into
+ *  groups (G) that can be mapped into the PMU (irq, fiqs, and irq+fiqs for
+ *  example).
+ */
+
+#define KRAIT_EVENT		(1 << 16)
+#define VENUM_EVENT		(2 << 16)
+#define KRAIT_EVENT_MASK	(KRAIT_EVENT | VENUM_EVENT)
+#define PMRESRn_EN		BIT(31)
+
+static u32 krait_read_pmresrn(int n)
+{
+	u32 val;
+
+	switch (n) {
+	case 0:
+		asm volatile("mrc p15, 1, %0, c9, c15, 0" : "=r" (val));
+		break;
+	case 1:
+		asm volatile("mrc p15, 1, %0, c9, c15, 1" : "=r" (val));
+		break;
+	case 2:
+		asm volatile("mrc p15, 1, %0, c9, c15, 2" : "=r" (val));
+		break;
+	default:
+		BUG(); /* Should be validated in krait_pmu_get_event_idx() */
+	}
+
+	return val;
+}
+
+static void krait_write_pmresrn(int n, u32 val)
+{
+	switch (n) {
+	case 0:
+		asm volatile("mcr p15, 1, %0, c9, c15, 0" : : "r" (val));
+		break;
+	case 1:
+		asm volatile("mcr p15, 1, %0, c9, c15, 1" : : "r" (val));
+		break;
+	case 2:
+		asm volatile("mcr p15, 1, %0, c9, c15, 2" : : "r" (val));
+		break;
+	default:
+		BUG(); /* Should be validated in krait_pmu_get_event_idx() */
+	}
+}
+
+static u32 krait_read_vpmresr0(void)
+{
+	u32 val;
+	asm volatile("mrc p10, 7, %0, c11, c0, 0" : "=r" (val));
+	return val;
+}
+
+static void krait_write_vpmresr0(u32 val)
+{
+	asm volatile("mcr p10, 7, %0, c11, c0, 0" : : "r" (val));
+}
+
+static void krait_pre_vpmresr0(u32 *venum_orig_val, u32 *fp_orig_val)
+{
+	u32 venum_new_val;
+	u32 fp_new_val;
+
+	BUG_ON(preemptible());
+	/* CPACR Enable CP10 and CP11 access */
+	*venum_orig_val = get_copro_access();
+	venum_new_val = *venum_orig_val | CPACC_SVC(10) | CPACC_SVC(11);
+	set_copro_access(venum_new_val);
+
+	/* Enable FPEXC */
+	*fp_orig_val = fmrx(FPEXC);
+	fp_new_val = *fp_orig_val | FPEXC_EN;
+	fmxr(FPEXC, fp_new_val);
+}
+
+static void krait_post_vpmresr0(u32 venum_orig_val, u32 fp_orig_val)
+{
+	BUG_ON(preemptible());
+	/* Restore FPEXC */
+	fmxr(FPEXC, fp_orig_val);
+	isb();
+	/* Restore CPACR */
+	set_copro_access(venum_orig_val);
+}
+
+static u32 krait_get_pmresrn_event(unsigned int region)
+{
+	static const u32 pmresrn_table[] = { KRAIT_PMRESR0_GROUP0,
+					     KRAIT_PMRESR1_GROUP0,
+					     KRAIT_PMRESR2_GROUP0 };
+	return pmresrn_table[region];
+}
+
+static void krait_evt_setup(int idx, u32 config_base)
+{
+	u32 val;
+	u32 mask;
+	u32 vval, fval;
+	unsigned int region;
+	unsigned int group;
+	unsigned int code;
+	unsigned int group_shift;
+	bool venum_event;
+
+	venum_event = !!(config_base & VENUM_EVENT);
+	region = (config_base >> 12) & 0xf;
+	code   = (config_base >> 4) & 0xff;
+	group  = (config_base >> 0)  & 0xf;
+
+	group_shift = group * 8;
+	mask = 0xff << group_shift;
+
+	/* Configure evtsel for the region and group */
+	if (venum_event)
+		val = KRAIT_VPMRESR0_GROUP0;
+	else
+		val = krait_get_pmresrn_event(region);
+	val += group;
+	/* Mix in mode-exclusion bits */
+	val |= config_base & (ARMV7_EXCLUDE_USER | ARMV7_EXCLUDE_PL1);
+	armv7_pmnc_write_evtsel(idx, val);
+
+	asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0));
+
+	if (venum_event) {
+		krait_pre_vpmresr0(&vval, &fval);
+		val = krait_read_vpmresr0();
+		val &= ~mask;
+		val |= code << group_shift;
+		val |= PMRESRn_EN;
+		krait_write_vpmresr0(val);
+		krait_post_vpmresr0(vval, fval);
+	} else {
+		val = krait_read_pmresrn(region);
+		val &= ~mask;
+		val |= code << group_shift;
+		val |= PMRESRn_EN;
+		krait_write_pmresrn(region, val);
+	}
+}
+
+static u32 krait_clear_pmresrn_group(u32 val, int group)
+{
+	u32 mask;
+	int group_shift;
+
+	group_shift = group * 8;
+	mask = 0xff << group_shift;
+	val &= ~mask;
+
+	/* Don't clear enable bit if entire region isn't disabled */
+	if (val & ~PMRESRn_EN)
+		return val |= PMRESRn_EN;
+
+	return 0;
+}
+
+static void krait_clearpmu(u32 config_base)
+{
+	u32 val;
+	u32 vval, fval;
+	unsigned int region;
+	unsigned int group;
+	bool venum_event;
+
+	venum_event = !!(config_base & VENUM_EVENT);
+	region = (config_base >> 12) & 0xf;
+	group  = (config_base >> 0)  & 0xf;
+
+	if (venum_event) {
+		krait_pre_vpmresr0(&vval, &fval);
+		val = krait_read_vpmresr0();
+		val = krait_clear_pmresrn_group(val, group);
+		krait_write_vpmresr0(val);
+		krait_post_vpmresr0(vval, fval);
+	} else {
+		val = krait_read_pmresrn(region);
+		val = krait_clear_pmresrn_group(val, group);
+		krait_write_pmresrn(region, val);
+	}
+}
+
+static void krait_pmu_disable_event(struct perf_event *event)
+{
+	unsigned long flags;
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+
+	/* Disable counter and interrupt */
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+	/* Disable counter */
+	armv7_pmnc_disable_counter(idx);
+
+	/*
+	 * Clear pmresr code (if destined for PMNx counters)
+	 */
+	if (hwc->config_base & KRAIT_EVENT_MASK)
+		krait_clearpmu(hwc->config_base);
+
+	/* Disable interrupt for this counter */
+	armv7_pmnc_disable_intens(idx);
+
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static void krait_pmu_enable_event(struct perf_event *event)
+{
+	unsigned long flags;
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+
+	/*
+	 * Enable counter and interrupt, and set the counter to count
+	 * the event that we're interested in.
+	 */
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+	/* Disable counter */
+	armv7_pmnc_disable_counter(idx);
+
+	/*
+	 * Set event (if destined for PMNx counters)
+	 * We set the event for the cycle counter because we
+	 * have the ability to perform event filtering.
+	 */
+	if (hwc->config_base & KRAIT_EVENT_MASK)
+		krait_evt_setup(idx, hwc->config_base);
+	else
+		armv7_pmnc_write_evtsel(idx, hwc->config_base);
+
+	/* Enable interrupt for this counter */
+	armv7_pmnc_enable_intens(idx);
+
+	/* Enable counter */
+	armv7_pmnc_enable_counter(idx);
+
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static void krait_pmu_reset(void *info)
+{
+	u32 vval, fval;
+
+	armv7pmu_reset(info);
+
+	/* Clear all pmresrs */
+	krait_write_pmresrn(0, 0);
+	krait_write_pmresrn(1, 0);
+	krait_write_pmresrn(2, 0);
+
+	krait_pre_vpmresr0(&vval, &fval);
+	krait_write_vpmresr0(0);
+	krait_post_vpmresr0(vval, fval);
+}
+
+static int krait_event_to_bit(struct perf_event *event, unsigned int region,
+			      unsigned int group)
+{
+	int bit;
+	struct hw_perf_event *hwc = &event->hw;
+	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
+
+	if (hwc->config_base & VENUM_EVENT)
+		bit = KRAIT_VPMRESR0_GROUP0;
+	else
+		bit = krait_get_pmresrn_event(region);
+	bit -= krait_get_pmresrn_event(0);
+	bit += group;
+	/*
+	 * Lower bits are reserved for use by the counters (see
+	 * armv7pmu_get_event_idx() for more info)
+	 */
+	bit += ARMV7_IDX_COUNTER_LAST(cpu_pmu) + 1;
+
+	return bit;
+}
+
+/*
+ * We check for column exclusion constraints here.
+ * Two events cant use the same group within a pmresr register.
+ */
+static int krait_pmu_get_event_idx(struct pmu_hw_events *cpuc,
+				   struct perf_event *event)
+{
+	int idx;
+	int bit;
+	unsigned int prefix;
+	unsigned int region;
+	unsigned int code;
+	unsigned int group;
+	bool krait_event;
+	struct hw_perf_event *hwc = &event->hw;
+
+	region = (hwc->config_base >> 12) & 0xf;
+	code   = (hwc->config_base >> 4) & 0xff;
+	group  = (hwc->config_base >> 0) & 0xf;
+	krait_event = !!(hwc->config_base & KRAIT_EVENT_MASK);
+
+	if (krait_event) {
+		/* Ignore invalid events */
+		if (group > 3 || region > 2)
+			return -EINVAL;
+		prefix = hwc->config_base & KRAIT_EVENT_MASK;
+		if (prefix != KRAIT_EVENT && prefix != VENUM_EVENT)
+			return -EINVAL;
+		if (prefix == VENUM_EVENT && (code & 0xe0))
+			return -EINVAL;
+
+		bit = krait_event_to_bit(event, region, group);
+		if (test_and_set_bit(bit, cpuc->used_mask))
+			return -EAGAIN;
+	}
+
+	idx = armv7pmu_get_event_idx(cpuc, event);
+	if (idx < 0 && krait_event)
+		clear_bit(bit, cpuc->used_mask);
+
+	return idx;
+}
+
+static void krait_pmu_clear_event_idx(struct pmu_hw_events *cpuc,
+				      struct perf_event *event)
+{
+	int bit;
+	struct hw_perf_event *hwc = &event->hw;
+	unsigned int region;
+	unsigned int group;
+	bool krait_event;
+
+	region = (hwc->config_base >> 12) & 0xf;
+	group  = (hwc->config_base >> 0) & 0xf;
+	krait_event = !!(hwc->config_base & KRAIT_EVENT_MASK);
+
+	if (krait_event) {
+		bit = krait_event_to_bit(event, region, group);
+		clear_bit(bit, cpuc->used_mask);
+	}
+}
+
+static int krait_pmu_init(struct arm_pmu *cpu_pmu)
+{
+	armv7pmu_init(cpu_pmu);
+	cpu_pmu->name		= "ARMv7 Krait";
+	/* Some early versions of Krait don't support PC write events */
+	if (of_property_read_bool(cpu_pmu->plat_device->dev.of_node,
+				  "qcom,no-pc-write"))
+		cpu_pmu->map_event = krait_map_event_no_branch;
+	else
+		cpu_pmu->map_event = krait_map_event;
+	cpu_pmu->num_events	= armv7_read_num_pmnc_events();
+	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
+	cpu_pmu->reset		= krait_pmu_reset;
+	cpu_pmu->enable		= krait_pmu_enable_event;
+	cpu_pmu->disable	= krait_pmu_disable_event;
+	cpu_pmu->get_event_idx	= krait_pmu_get_event_idx;
+	cpu_pmu->clear_event_idx = krait_pmu_clear_event_idx;
+	return 0;
+}
 #else
 static inline int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
 {
@@ -1308,4 +2022,19 @@ static inline int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	return -ENODEV;
 }
+
+static inline int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu)
+{
+	return -ENODEV;
+}
+
+static inline int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu)
+{
+	return -ENODEV;
+}
+
+static inline int krait_pmu_init(struct arm_pmu *cpu_pmu)
+{
+	return -ENODEV;
+}
 #endif	/* CONFIG_CPU_V7 */
diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c
index 679cf4d18c08..8153e36b2491 100644
--- a/arch/arm/kernel/pj4-cp0.c
+++ b/arch/arm/kernel/pj4-cp0.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <asm/thread_notify.h>
+#include <asm/cputype.h>
 
 static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
 {
@@ -44,7 +45,7 @@ static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
 	return NOTIFY_DONE;
 }
 
-static struct notifier_block iwmmxt_notifier_block = {
+static struct notifier_block __maybe_unused iwmmxt_notifier_block = {
 	.notifier_call	= iwmmxt_do,
 };
 
@@ -71,6 +72,33 @@ static void __init pj4_cp_access_write(u32 value)
 		: "=r" (temp) : "r" (value));
 }
 
+static int __init pj4_get_iwmmxt_version(void)
+{
+	u32 cp_access, wcid;
+
+	cp_access = pj4_cp_access_read();
+	pj4_cp_access_write(cp_access | 0xf);
+
+	/* check if coprocessor 0 and 1 are available */
+	if ((pj4_cp_access_read() & 0xf) != 0xf) {
+		pj4_cp_access_write(cp_access);
+		return -ENODEV;
+	}
+
+	/* read iWMMXt coprocessor id register p1, c0 */
+	__asm__ __volatile__ ("mrc    p1, 0, %0, c0, c0, 0\n" : "=r" (wcid));
+
+	pj4_cp_access_write(cp_access);
+
+	/* iWMMXt v1 */
+	if ((wcid & 0xffffff00) == 0x56051000)
+		return 1;
+	/* iWMMXt v2 */
+	if ((wcid & 0xffffff00) == 0x56052000)
+		return 2;
+
+	return -EINVAL;
+}
 
 /*
  * Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy
@@ -78,14 +106,26 @@ static void __init pj4_cp_access_write(u32 value)
  */
 static int __init pj4_cp0_init(void)
 {
-	u32 cp_access;
+	u32 __maybe_unused cp_access;
+	int vers;
+
+	if (!cpu_is_pj4())
+		return 0;
+
+	vers = pj4_get_iwmmxt_version();
+	if (vers < 0)
+		return 0;
 
+#ifndef CONFIG_IWMMXT
+	pr_info("PJ4 iWMMXt coprocessor detected, but kernel support is missing.\n");
+#else
 	cp_access = pj4_cp_access_read() & ~0xf;
 	pj4_cp_access_write(cp_access);
 
-	printk(KERN_INFO "PJ4 iWMMXt coprocessor enabled.\n");
+	pr_info("PJ4 iWMMXt v%d coprocessor enabled.\n", vers);
 	elf_hwcap |= HWCAP_IWMMXT;
 	thread_register_notifier(&iwmmxt_notifier_block);
+#endif
 
 	return 0;
 }
diff --git a/arch/arm/kernel/probes-arm.c b/arch/arm/kernel/probes-arm.c
new file mode 100644
index 000000000000..51a13a027989
--- /dev/null
+++ b/arch/arm/kernel/probes-arm.c
@@ -0,0 +1,734 @@
+/*
+ * arch/arm/kernel/probes-arm.c
+ *
+ * Some code moved here from arch/arm/kernel/kprobes-arm.c
+ *
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/ptrace.h>
+
+#include "probes.h"
+#include "probes-arm.h"
+
+#define sign_extend(x, signbit) ((x) | (0 - ((x) & (1 << (signbit)))))
+
+#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25)
+
+/*
+ * To avoid the complications of mimicing single-stepping on a
+ * processor without a Next-PC or a single-step mode, and to
+ * avoid having to deal with the side-effects of boosting, we
+ * simulate or emulate (almost) all ARM instructions.
+ *
+ * "Simulation" is where the instruction's behavior is duplicated in
+ * C code.  "Emulation" is where the original instruction is rewritten
+ * and executed, often by altering its registers.
+ *
+ * By having all behavior of the kprobe'd instruction completed before
+ * returning from the kprobe_handler(), all locks (scheduler and
+ * interrupt) can safely be released.  There is no need for secondary
+ * breakpoints, no race with MP or preemptable kernels, nor having to
+ * clean up resources counts at a later time impacting overall system
+ * performance.  By rewriting the instruction, only the minimum registers
+ * need to be loaded and saved back optimizing performance.
+ *
+ * Calling the insnslot_*_rwflags version of a function doesn't hurt
+ * anything even when the CPSR flags aren't updated by the
+ * instruction.  It's just a little slower in return for saving
+ * a little space by not having a duplicate function that doesn't
+ * update the flags.  (The same optimization can be said for
+ * instructions that do or don't perform register writeback)
+ * Also, instructions can either read the flags, only write the
+ * flags, or read and write the flags.  To save combinations
+ * rather than for sheer performance, flag functions just assume
+ * read and write of flags.
+ */
+
+void __kprobes simulate_bbl(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
+{
+	long iaddr = (long) regs->ARM_pc - 4;
+	int disp  = branch_displacement(insn);
+
+	if (insn & (1 << 24))
+		regs->ARM_lr = iaddr + 4;
+
+	regs->ARM_pc = iaddr + 8 + disp;
+}
+
+void __kprobes simulate_blx1(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
+{
+	long iaddr = (long) regs->ARM_pc - 4;
+	int disp = branch_displacement(insn);
+
+	regs->ARM_lr = iaddr + 4;
+	regs->ARM_pc = iaddr + 8 + disp + ((insn >> 23) & 0x2);
+	regs->ARM_cpsr |= PSR_T_BIT;
+}
+
+void __kprobes simulate_blx2bx(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
+{
+	int rm = insn & 0xf;
+	long rmv = regs->uregs[rm];
+
+	if (insn & (1 << 5))
+		regs->ARM_lr = (long) regs->ARM_pc;
+
+	regs->ARM_pc = rmv & ~0x1;
+	regs->ARM_cpsr &= ~PSR_T_BIT;
+	if (rmv & 0x1)
+		regs->ARM_cpsr |= PSR_T_BIT;
+}
+
+void __kprobes simulate_mrs(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
+{
+	int rd = (insn >> 12) & 0xf;
+	unsigned long mask = 0xf8ff03df; /* Mask out execution state */
+	regs->uregs[rd] = regs->ARM_cpsr & mask;
+}
+
+void __kprobes simulate_mov_ipsp(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
+{
+	regs->uregs[12] = regs->uregs[13];
+}
+
+/*
+ * For the instruction masking and comparisons in all the "space_*"
+ * functions below, Do _not_ rearrange the order of tests unless
+ * you're very, very sure of what you are doing.  For the sake of
+ * efficiency, the masks for some tests sometimes assume other test
+ * have been done prior to them so the number of patterns to test
+ * for an instruction set can be as broad as possible to reduce the
+ * number of tests needed.
+ */
+
+static const union decode_item arm_1111_table[] = {
+	/* Unconditional instructions					*/
+
+	/* memory hint		1111 0100 x001 xxxx xxxx xxxx xxxx xxxx */
+	/* PLDI (immediate)	1111 0100 x101 xxxx xxxx xxxx xxxx xxxx */
+	/* PLDW (immediate)	1111 0101 x001 xxxx xxxx xxxx xxxx xxxx */
+	/* PLD (immediate)	1111 0101 x101 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_SIMULATE	(0xfe300000, 0xf4100000, PROBES_PRELOAD_IMM),
+
+	/* memory hint		1111 0110 x001 xxxx xxxx xxxx xxx0 xxxx */
+	/* PLDI (register)	1111 0110 x101 xxxx xxxx xxxx xxx0 xxxx */
+	/* PLDW (register)	1111 0111 x001 xxxx xxxx xxxx xxx0 xxxx */
+	/* PLD (register)	1111 0111 x101 xxxx xxxx xxxx xxx0 xxxx */
+	DECODE_SIMULATE	(0xfe300010, 0xf6100000, PROBES_PRELOAD_REG),
+
+	/* BLX (immediate)	1111 101x xxxx xxxx xxxx xxxx xxxx xxxx */
+	DECODE_SIMULATE	(0xfe000000, 0xfa000000, PROBES_BRANCH_IMM),
+
+	/* CPS			1111 0001 0000 xxx0 xxxx xxxx xx0x xxxx */
+	/* SETEND		1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
+	/* SRS			1111 100x x1x0 xxxx xxxx xxxx xxxx xxxx */
+	/* RFE			1111 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
+
+	/* Coprocessor instructions... */
+	/* MCRR2		1111 1100 0100 xxxx xxxx xxxx xxxx xxxx */
+	/* MRRC2		1111 1100 0101 xxxx xxxx xxxx xxxx xxxx */
+	/* LDC2			1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+	/* STC2			1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+	/* CDP2			1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+	/* MCR2			1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+	/* MRC2			1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
+
+	/* Other unallocated instructions...				*/
+	DECODE_END
+};
+
+static const union decode_item arm_cccc_0001_0xx0____0xxx_table[] = {
+	/* Miscellaneous instructions					*/
+
+	/* MRS cpsr		cccc 0001 0000 xxxx xxxx xxxx 0000 xxxx */
+	DECODE_SIMULATEX(0x0ff000f0, 0x01000000, PROBES_MRS,
+						 REGS(0, NOPC, 0, 0, 0)),
+
+	/* BX			cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */
+	DECODE_SIMULATE	(0x0ff000f0, 0x01200010, PROBES_BRANCH_REG),
+
+	/* BLX (register)	cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */
+	DECODE_SIMULATEX(0x0ff000f0, 0x01200030, PROBES_BRANCH_REG,
+						 REGS(0, 0, 0, 0, NOPC)),
+
+	/* CLZ			cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */
+	DECODE_EMULATEX	(0x0ff000f0, 0x01600010, PROBES_CLZ,
+						 REGS(0, NOPC, 0, 0, NOPC)),
+
+	/* QADD			cccc 0001 0000 xxxx xxxx xxxx 0101 xxxx */
+	/* QSUB			cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx */
+	/* QDADD		cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx */
+	/* QDSUB		cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx */
+	DECODE_EMULATEX	(0x0f9000f0, 0x01000050, PROBES_SATURATING_ARITHMETIC,
+						 REGS(NOPC, NOPC, 0, 0, NOPC)),
+
+	/* BXJ			cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
+	/* MSR			cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
+	/* MRS spsr		cccc 0001 0100 xxxx xxxx xxxx 0000 xxxx */
+	/* BKPT			1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
+	/* SMC			cccc 0001 0110 xxxx xxxx xxxx 0111 xxxx */
+	/* And unallocated instructions...				*/
+	DECODE_END
+};
+
+static const union decode_item arm_cccc_0001_0xx0____1xx0_table[] = {
+	/* Halfword multiply and multiply-accumulate			*/
+
+	/* SMLALxy		cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */
+	DECODE_EMULATEX	(0x0ff00090, 0x01400080, PROBES_MUL1,
+						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
+
+	/* SMULWy		cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */
+	DECODE_OR	(0x0ff000b0, 0x012000a0),
+	/* SMULxy		cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */
+	DECODE_EMULATEX	(0x0ff00090, 0x01600080, PROBES_MUL2,
+						 REGS(NOPC, 0, NOPC, 0, NOPC)),
+
+	/* SMLAxy		cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx */
+	DECODE_OR	(0x0ff00090, 0x01000080),
+	/* SMLAWy		cccc 0001 0010 xxxx xxxx xxxx 1x00 xxxx */
+	DECODE_EMULATEX	(0x0ff000b0, 0x01200080, PROBES_MUL2,
+						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
+
+	DECODE_END
+};
+
+static const union decode_item arm_cccc_0000_____1001_table[] = {
+	/* Multiply and multiply-accumulate				*/
+
+	/* MUL			cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx */
+	/* MULS			cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx */
+	DECODE_EMULATEX	(0x0fe000f0, 0x00000090, PROBES_MUL2,
+						 REGS(NOPC, 0, NOPC, 0, NOPC)),
+
+	/* MLA			cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx */
+	/* MLAS			cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx */
+	DECODE_OR	(0x0fe000f0, 0x00200090),
+	/* MLS			cccc 0000 0110 xxxx xxxx xxxx 1001 xxxx */
+	DECODE_EMULATEX	(0x0ff000f0, 0x00600090, PROBES_MUL2,
+						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
+
+	/* UMAAL		cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx */
+	DECODE_OR	(0x0ff000f0, 0x00400090),
+	/* UMULL		cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx */
+	/* UMULLS		cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx */
+	/* UMLAL		cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx */
+	/* UMLALS		cccc 0000 1011 xxxx xxxx xxxx 1001 xxxx */
+	/* SMULL		cccc 0000 1100 xxxx xxxx xxxx 1001 xxxx */
+	/* SMULLS		cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx */
+	/* SMLAL		cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx */
+	/* SMLALS		cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx */
+	DECODE_EMULATEX	(0x0f8000f0, 0x00800090, PROBES_MUL1,
+						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
+
+	DECODE_END
+};
+
+static const union decode_item arm_cccc_0001_____1001_table[] = {
+	/* Synchronization primitives					*/
+
+#if __LINUX_ARM_ARCH__ < 6
+	/* Deprecated on ARMv6 and may be UNDEFINED on v7		*/
+	/* SMP/SWPB		cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */
+	DECODE_EMULATEX	(0x0fb000f0, 0x01000090, PROBES_SWP,
+						 REGS(NOPC, NOPC, 0, 0, NOPC)),
+#endif
+	/* LDREX/STREX{,D,B,H}	cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */
+	/* And unallocated instructions...				*/
+	DECODE_END
+};
+
+static const union decode_item arm_cccc_000x_____1xx1_table[] = {
+	/* Extra load/store instructions				*/
+
+	/* STRHT		cccc 0000 xx10 xxxx xxxx xxxx 1011 xxxx */
+	/* ???			cccc 0000 xx10 xxxx xxxx xxxx 11x1 xxxx */
+	/* LDRHT		cccc 0000 xx11 xxxx xxxx xxxx 1011 xxxx */
+	/* LDRSBT		cccc 0000 xx11 xxxx xxxx xxxx 1101 xxxx */
+	/* LDRSHT		cccc 0000 xx11 xxxx xxxx xxxx 1111 xxxx */
+	DECODE_REJECT	(0x0f200090, 0x00200090),
+
+	/* LDRD/STRD lr,pc,{...	cccc 000x x0x0 xxxx 111x xxxx 1101 xxxx */
+	DECODE_REJECT	(0x0e10e0d0, 0x0000e0d0),
+
+	/* LDRD (register)	cccc 000x x0x0 xxxx xxxx xxxx 1101 xxxx */
+	/* STRD (register)	cccc 000x x0x0 xxxx xxxx xxxx 1111 xxxx */
+	DECODE_EMULATEX	(0x0e5000d0, 0x000000d0, PROBES_LDRSTRD,
+						 REGS(NOPCWB, NOPCX, 0, 0, NOPC)),
+
+	/* LDRD (immediate)	cccc 000x x1x0 xxxx xxxx xxxx 1101 xxxx */
+	/* STRD (immediate)	cccc 000x x1x0 xxxx xxxx xxxx 1111 xxxx */
+	DECODE_EMULATEX	(0x0e5000d0, 0x004000d0, PROBES_LDRSTRD,
+						 REGS(NOPCWB, NOPCX, 0, 0, 0)),
+
+	/* STRH (register)	cccc 000x x0x0 xxxx xxxx xxxx 1011 xxxx */
+	DECODE_EMULATEX	(0x0e5000f0, 0x000000b0, PROBES_STORE_EXTRA,
+						 REGS(NOPCWB, NOPC, 0, 0, NOPC)),
+
+	/* LDRH (register)	cccc 000x x0x1 xxxx xxxx xxxx 1011 xxxx */
+	/* LDRSB (register)	cccc 000x x0x1 xxxx xxxx xxxx 1101 xxxx */
+	/* LDRSH (register)	cccc 000x x0x1 xxxx xxxx xxxx 1111 xxxx */
+	DECODE_EMULATEX	(0x0e500090, 0x00100090, PROBES_LOAD_EXTRA,
+						 REGS(NOPCWB, NOPC, 0, 0, NOPC)),
+
+	/* STRH (immediate)	cccc 000x x1x0 xxxx xxxx xxxx 1011 xxxx */
+	DECODE_EMULATEX	(0x0e5000f0, 0x004000b0, PROBES_STORE_EXTRA,
+						 REGS(NOPCWB, NOPC, 0, 0, 0)),
+
+	/* LDRH (immediate)	cccc 000x x1x1 xxxx xxxx xxxx 1011 xxxx */
+	/* LDRSB (immediate)	cccc 000x x1x1 xxxx xxxx xxxx 1101 xxxx */
+	/* LDRSH (immediate)	cccc 000x x1x1 xxxx xxxx xxxx 1111 xxxx */
+	DECODE_EMULATEX	(0x0e500090, 0x00500090, PROBES_LOAD_EXTRA,
+						 REGS(NOPCWB, NOPC, 0, 0, 0)),
+
+	DECODE_END
+};
+
+static const union decode_item arm_cccc_000x_table[] = {
+	/* Data-processing (register)					*/
+
+	/* <op>S PC, ...	cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx */
+	DECODE_REJECT	(0x0e10f000, 0x0010f000),
+
+	/* MOV IP, SP		1110 0001 1010 0000 1100 0000 0000 1101 */
+	DECODE_SIMULATE	(0xffffffff, 0xe1a0c00d, PROBES_MOV_IP_SP),
+
+	/* TST (register)	cccc 0001 0001 xxxx xxxx xxxx xxx0 xxxx */
+	/* TEQ (register)	cccc 0001 0011 xxxx xxxx xxxx xxx0 xxxx */
+	/* CMP (register)	cccc 0001 0101 xxxx xxxx xxxx xxx0 xxxx */
+	/* CMN (register)	cccc 0001 0111 xxxx xxxx xxxx xxx0 xxxx */
+	DECODE_EMULATEX	(0x0f900010, 0x01100000, PROBES_DATA_PROCESSING_REG,
+						 REGS(ANY, 0, 0, 0, ANY)),
+
+	/* MOV (register)	cccc 0001 101x xxxx xxxx xxxx xxx0 xxxx */
+	/* MVN (register)	cccc 0001 111x xxxx xxxx xxxx xxx0 xxxx */
+	DECODE_EMULATEX	(0x0fa00010, 0x01a00000, PROBES_DATA_PROCESSING_REG,
+						 REGS(0, ANY, 0, 0, ANY)),
+
+	/* AND (register)	cccc 0000 000x xxxx xxxx xxxx xxx0 xxxx */
+	/* EOR (register)	cccc 0000 001x xxxx xxxx xxxx xxx0 xxxx */
+	/* SUB (register)	cccc 0000 010x xxxx xxxx xxxx xxx0 xxxx */
+	/* RSB (register)	cccc 0000 011x xxxx xxxx xxxx xxx0 xxxx */
+	/* ADD (register)	cccc 0000 100x xxxx xxxx xxxx xxx0 xxxx */
+	/* ADC (register)	cccc 0000 101x xxxx xxxx xxxx xxx0 xxxx */
+	/* SBC (register)	cccc 0000 110x xxxx xxxx xxxx xxx0 xxxx */
+	/* RSC (register)	cccc 0000 111x xxxx xxxx xxxx xxx0 xxxx */
+	/* ORR (register)	cccc 0001 100x xxxx xxxx xxxx xxx0 xxxx */
+	/* BIC (register)	cccc 0001 110x xxxx xxxx xxxx xxx0 xxxx */
+	DECODE_EMULATEX	(0x0e000010, 0x00000000, PROBES_DATA_PROCESSING_REG,
+						 REGS(ANY, ANY, 0, 0, ANY)),
+
+	/* TST (reg-shift reg)	cccc 0001 0001 xxxx xxxx xxxx 0xx1 xxxx */
+	/* TEQ (reg-shift reg)	cccc 0001 0011 xxxx xxxx xxxx 0xx1 xxxx */
+	/* CMP (reg-shift reg)	cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */
+	/* CMN (reg-shift reg)	cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */
+	DECODE_EMULATEX	(0x0f900090, 0x01100010, PROBES_DATA_PROCESSING_REG,
+						 REGS(ANY, 0, NOPC, 0, ANY)),
+
+	/* MOV (reg-shift reg)	cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */
+	/* MVN (reg-shift reg)	cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */
+	DECODE_EMULATEX	(0x0fa00090, 0x01a00010, PROBES_DATA_PROCESSING_REG,
+						 REGS(0, ANY, NOPC, 0, ANY)),
+
+	/* AND (reg-shift reg)	cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */
+	/* EOR (reg-shift reg)	cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */
+	/* SUB (reg-shift reg)	cccc 0000 010x xxxx xxxx xxxx 0xx1 xxxx */
+	/* RSB (reg-shift reg)	cccc 0000 011x xxxx xxxx xxxx 0xx1 xxxx */
+	/* ADD (reg-shift reg)	cccc 0000 100x xxxx xxxx xxxx 0xx1 xxxx */
+	/* ADC (reg-shift reg)	cccc 0000 101x xxxx xxxx xxxx 0xx1 xxxx */
+	/* SBC (reg-shift reg)	cccc 0000 110x xxxx xxxx xxxx 0xx1 xxxx */
+	/* RSC (reg-shift reg)	cccc 0000 111x xxxx xxxx xxxx 0xx1 xxxx */
+	/* ORR (reg-shift reg)	cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */
+	/* BIC (reg-shift reg)	cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */
+	DECODE_EMULATEX	(0x0e000090, 0x00000010, PROBES_DATA_PROCESSING_REG,
+						 REGS(ANY, ANY, NOPC, 0, ANY)),
+
+	DECODE_END
+};
+
+static const union decode_item arm_cccc_001x_table[] = {
+	/* Data-processing (immediate)					*/
+
+	/* MOVW			cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */
+	/* MOVT			cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0x0fb00000, 0x03000000, PROBES_DATA_PROCESSING_IMM,
+						 REGS(0, NOPC, 0, 0, 0)),
+
+	/* YIELD		cccc 0011 0010 0000 xxxx xxxx 0000 0001 */
+	DECODE_OR	(0x0fff00ff, 0x03200001),
+	/* SEV			cccc 0011 0010 0000 xxxx xxxx 0000 0100 */
+	DECODE_EMULATE	(0x0fff00ff, 0x03200004, PROBES_EMULATE_NONE),
+	/* NOP			cccc 0011 0010 0000 xxxx xxxx 0000 0000 */
+	/* WFE			cccc 0011 0010 0000 xxxx xxxx 0000 0010 */
+	/* WFI			cccc 0011 0010 0000 xxxx xxxx 0000 0011 */
+	DECODE_SIMULATE	(0x0fff00fc, 0x03200000, PROBES_SIMULATE_NOP),
+	/* DBG			cccc 0011 0010 0000 xxxx xxxx ffff xxxx */
+	/* unallocated hints	cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */
+	/* MSR (immediate)	cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0x0fb00000, 0x03200000),
+
+	/* <op>S PC, ...	cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx */
+	DECODE_REJECT	(0x0e10f000, 0x0210f000),
+
+	/* TST (immediate)	cccc 0011 0001 xxxx xxxx xxxx xxxx xxxx */
+	/* TEQ (immediate)	cccc 0011 0011 xxxx xxxx xxxx xxxx xxxx */
+	/* CMP (immediate)	cccc 0011 0101 xxxx xxxx xxxx xxxx xxxx */
+	/* CMN (immediate)	cccc 0011 0111 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0x0f900000, 0x03100000, PROBES_DATA_PROCESSING_IMM,
+						 REGS(ANY, 0, 0, 0, 0)),
+
+	/* MOV (immediate)	cccc 0011 101x xxxx xxxx xxxx xxxx xxxx */
+	/* MVN (immediate)	cccc 0011 111x xxxx xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0x0fa00000, 0x03a00000, PROBES_DATA_PROCESSING_IMM,
+						 REGS(0, ANY, 0, 0, 0)),
+
+	/* AND (immediate)	cccc 0010 000x xxxx xxxx xxxx xxxx xxxx */
+	/* EOR (immediate)	cccc 0010 001x xxxx xxxx xxxx xxxx xxxx */
+	/* SUB (immediate)	cccc 0010 010x xxxx xxxx xxxx xxxx xxxx */
+	/* RSB (immediate)	cccc 0010 011x xxxx xxxx xxxx xxxx xxxx */
+	/* ADD (immediate)	cccc 0010 100x xxxx xxxx xxxx xxxx xxxx */
+	/* ADC (immediate)	cccc 0010 101x xxxx xxxx xxxx xxxx xxxx */
+	/* SBC (immediate)	cccc 0010 110x xxxx xxxx xxxx xxxx xxxx */
+	/* RSC (immediate)	cccc 0010 111x xxxx xxxx xxxx xxxx xxxx */
+	/* ORR (immediate)	cccc 0011 100x xxxx xxxx xxxx xxxx xxxx */
+	/* BIC (immediate)	cccc 0011 110x xxxx xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0x0e000000, 0x02000000, PROBES_DATA_PROCESSING_IMM,
+						 REGS(ANY, ANY, 0, 0, 0)),
+
+	DECODE_END
+};
+
+static const union decode_item arm_cccc_0110_____xxx1_table[] = {
+	/* Media instructions						*/
+
+	/* SEL			cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx */
+	DECODE_EMULATEX	(0x0ff000f0, 0x068000b0, PROBES_SATURATE,
+						 REGS(NOPC, NOPC, 0, 0, NOPC)),
+
+	/* SSAT			cccc 0110 101x xxxx xxxx xxxx xx01 xxxx */
+	/* USAT			cccc 0110 111x xxxx xxxx xxxx xx01 xxxx */
+	DECODE_OR(0x0fa00030, 0x06a00010),
+	/* SSAT16		cccc 0110 1010 xxxx xxxx xxxx 0011 xxxx */
+	/* USAT16		cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx */
+	DECODE_EMULATEX	(0x0fb000f0, 0x06a00030, PROBES_SATURATE,
+						 REGS(0, NOPC, 0, 0, NOPC)),
+
+	/* REV			cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */
+	/* REV16		cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */
+	/* RBIT			cccc 0110 1111 xxxx xxxx xxxx 0011 xxxx */
+	/* REVSH		cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */
+	DECODE_EMULATEX	(0x0fb00070, 0x06b00030, PROBES_REV,
+						 REGS(0, NOPC, 0, 0, NOPC)),
+
+	/* ???			cccc 0110 0x00 xxxx xxxx xxxx xxx1 xxxx */
+	DECODE_REJECT	(0x0fb00010, 0x06000010),
+	/* ???			cccc 0110 0xxx xxxx xxxx xxxx 1011 xxxx */
+	DECODE_REJECT	(0x0f8000f0, 0x060000b0),
+	/* ???			cccc 0110 0xxx xxxx xxxx xxxx 1101 xxxx */
+	DECODE_REJECT	(0x0f8000f0, 0x060000d0),
+	/* SADD16		cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx */
+	/* SADDSUBX		cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx */
+	/* SSUBADDX		cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx */
+	/* SSUB16		cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx */
+	/* SADD8		cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx */
+	/* SSUB8		cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx */
+	/* QADD16		cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx */
+	/* QADDSUBX		cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx */
+	/* QSUBADDX		cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx */
+	/* QSUB16		cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx */
+	/* QADD8		cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx */
+	/* QSUB8		cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx */
+	/* SHADD16		cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx */
+	/* SHADDSUBX		cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx */
+	/* SHSUBADDX		cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx */
+	/* SHSUB16		cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx */
+	/* SHADD8		cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx */
+	/* SHSUB8		cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx */
+	/* UADD16		cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx */
+	/* UADDSUBX		cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx */
+	/* USUBADDX		cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx */
+	/* USUB16		cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx */
+	/* UADD8		cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx */
+	/* USUB8		cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx */
+	/* UQADD16		cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx */
+	/* UQADDSUBX		cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx */
+	/* UQSUBADDX		cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx */
+	/* UQSUB16		cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx */
+	/* UQADD8		cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx */
+	/* UQSUB8		cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx */
+	/* UHADD16		cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx */
+	/* UHADDSUBX		cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx */
+	/* UHSUBADDX		cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx */
+	/* UHSUB16		cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx */
+	/* UHADD8		cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx */
+	/* UHSUB8		cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx */
+	DECODE_EMULATEX	(0x0f800010, 0x06000010, PROBES_MMI,
+						 REGS(NOPC, NOPC, 0, 0, NOPC)),
+
+	/* PKHBT		cccc 0110 1000 xxxx xxxx xxxx x001 xxxx */
+	/* PKHTB		cccc 0110 1000 xxxx xxxx xxxx x101 xxxx */
+	DECODE_EMULATEX	(0x0ff00030, 0x06800010, PROBES_PACK,
+						 REGS(NOPC, NOPC, 0, 0, NOPC)),
+
+	/* ???			cccc 0110 1001 xxxx xxxx xxxx 0111 xxxx */
+	/* ???			cccc 0110 1101 xxxx xxxx xxxx 0111 xxxx */
+	DECODE_REJECT	(0x0fb000f0, 0x06900070),
+
+	/* SXTB16		cccc 0110 1000 1111 xxxx xxxx 0111 xxxx */
+	/* SXTB			cccc 0110 1010 1111 xxxx xxxx 0111 xxxx */
+	/* SXTH			cccc 0110 1011 1111 xxxx xxxx 0111 xxxx */
+	/* UXTB16		cccc 0110 1100 1111 xxxx xxxx 0111 xxxx */
+	/* UXTB			cccc 0110 1110 1111 xxxx xxxx 0111 xxxx */
+	/* UXTH			cccc 0110 1111 1111 xxxx xxxx 0111 xxxx */
+	DECODE_EMULATEX	(0x0f8f00f0, 0x068f0070, PROBES_EXTEND,
+						 REGS(0, NOPC, 0, 0, NOPC)),
+
+	/* SXTAB16		cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx */
+	/* SXTAB		cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx */
+	/* SXTAH		cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx */
+	/* UXTAB16		cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx */
+	/* UXTAB		cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx */
+	/* UXTAH		cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx */
+	DECODE_EMULATEX	(0x0f8000f0, 0x06800070, PROBES_EXTEND_ADD,
+						 REGS(NOPCX, NOPC, 0, 0, NOPC)),
+
+	DECODE_END
+};
+
+static const union decode_item arm_cccc_0111_____xxx1_table[] = {
+	/* Media instructions						*/
+
+	/* UNDEFINED		cccc 0111 1111 xxxx xxxx xxxx 1111 xxxx */
+	DECODE_REJECT	(0x0ff000f0, 0x07f000f0),
+
+	/* SMLALD		cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */
+	/* SMLSLD		cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */
+	DECODE_EMULATEX	(0x0ff00090, 0x07400010, PROBES_MUL_ADD_LONG,
+						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
+
+	/* SMUAD		cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx */
+	/* SMUSD		cccc 0111 0000 xxxx 1111 xxxx 01x1 xxxx */
+	DECODE_OR	(0x0ff0f090, 0x0700f010),
+	/* SMMUL		cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx */
+	DECODE_OR	(0x0ff0f0d0, 0x0750f010),
+	/* USAD8		cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */
+	DECODE_EMULATEX	(0x0ff0f0f0, 0x0780f010, PROBES_MUL_ADD,
+						 REGS(NOPC, 0, NOPC, 0, NOPC)),
+
+	/* SMLAD		cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx */
+	/* SMLSD		cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx */
+	DECODE_OR	(0x0ff00090, 0x07000010),
+	/* SMMLA		cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx */
+	DECODE_OR	(0x0ff000d0, 0x07500010),
+	/* USADA8		cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */
+	DECODE_EMULATEX	(0x0ff000f0, 0x07800010, PROBES_MUL_ADD,
+						 REGS(NOPC, NOPCX, NOPC, 0, NOPC)),
+
+	/* SMMLS		cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx */
+	DECODE_EMULATEX	(0x0ff000d0, 0x075000d0, PROBES_MUL_ADD,
+						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
+
+	/* SBFX			cccc 0111 101x xxxx xxxx xxxx x101 xxxx */
+	/* UBFX			cccc 0111 111x xxxx xxxx xxxx x101 xxxx */
+	DECODE_EMULATEX	(0x0fa00070, 0x07a00050, PROBES_BITFIELD,
+						 REGS(0, NOPC, 0, 0, NOPC)),
+
+	/* BFC			cccc 0111 110x xxxx xxxx xxxx x001 1111 */
+	DECODE_EMULATEX	(0x0fe0007f, 0x07c0001f, PROBES_BITFIELD,
+						 REGS(0, NOPC, 0, 0, 0)),
+
+	/* BFI			cccc 0111 110x xxxx xxxx xxxx x001 xxxx */
+	DECODE_EMULATEX	(0x0fe00070, 0x07c00010, PROBES_BITFIELD,
+						 REGS(0, NOPC, 0, 0, NOPCX)),
+
+	DECODE_END
+};
+
+static const union decode_item arm_cccc_01xx_table[] = {
+	/* Load/store word and unsigned byte				*/
+
+	/* LDRB/STRB pc,[...]	cccc 01xx x0xx xxxx xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0x0c40f000, 0x0440f000),
+
+	/* STRT			cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */
+	/* LDRT			cccc 01x0 x011 xxxx xxxx xxxx xxxx xxxx */
+	/* STRBT		cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */
+	/* LDRBT		cccc 01x0 x111 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0x0d200000, 0x04200000),
+
+	/* STR (immediate)	cccc 010x x0x0 xxxx xxxx xxxx xxxx xxxx */
+	/* STRB (immediate)	cccc 010x x1x0 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0x0e100000, 0x04000000, PROBES_STORE,
+						 REGS(NOPCWB, ANY, 0, 0, 0)),
+
+	/* LDR (immediate)	cccc 010x x0x1 xxxx xxxx xxxx xxxx xxxx */
+	/* LDRB (immediate)	cccc 010x x1x1 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0x0e100000, 0x04100000, PROBES_LOAD,
+						 REGS(NOPCWB, ANY, 0, 0, 0)),
+
+	/* STR (register)	cccc 011x x0x0 xxxx xxxx xxxx xxxx xxxx */
+	/* STRB (register)	cccc 011x x1x0 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0x0e100000, 0x06000000, PROBES_STORE,
+						 REGS(NOPCWB, ANY, 0, 0, NOPC)),
+
+	/* LDR (register)	cccc 011x x0x1 xxxx xxxx xxxx xxxx xxxx */
+	/* LDRB (register)	cccc 011x x1x1 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0x0e100000, 0x06100000, PROBES_LOAD,
+						 REGS(NOPCWB, ANY, 0, 0, NOPC)),
+
+	DECODE_END
+};
+
+static const union decode_item arm_cccc_100x_table[] = {
+	/* Block data transfer instructions				*/
+
+	/* LDM			cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
+	/* STM			cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_CUSTOM	(0x0e400000, 0x08000000, PROBES_LDMSTM),
+
+	/* STM (user registers)	cccc 100x x1x0 xxxx xxxx xxxx xxxx xxxx */
+	/* LDM (user registers)	cccc 100x x1x1 xxxx 0xxx xxxx xxxx xxxx */
+	/* LDM (exception ret)	cccc 100x x1x1 xxxx 1xxx xxxx xxxx xxxx */
+	DECODE_END
+};
+
+const union decode_item probes_decode_arm_table[] = {
+	/*
+	 * Unconditional instructions
+	 *			1111 xxxx xxxx xxxx xxxx xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0xf0000000, 0xf0000000, arm_1111_table),
+
+	/*
+	 * Miscellaneous instructions
+	 *			cccc 0001 0xx0 xxxx xxxx xxxx 0xxx xxxx
+	 */
+	DECODE_TABLE	(0x0f900080, 0x01000000, arm_cccc_0001_0xx0____0xxx_table),
+
+	/*
+	 * Halfword multiply and multiply-accumulate
+	 *			cccc 0001 0xx0 xxxx xxxx xxxx 1xx0 xxxx
+	 */
+	DECODE_TABLE	(0x0f900090, 0x01000080, arm_cccc_0001_0xx0____1xx0_table),
+
+	/*
+	 * Multiply and multiply-accumulate
+	 *			cccc 0000 xxxx xxxx xxxx xxxx 1001 xxxx
+	 */
+	DECODE_TABLE	(0x0f0000f0, 0x00000090, arm_cccc_0000_____1001_table),
+
+	/*
+	 * Synchronization primitives
+	 *			cccc 0001 xxxx xxxx xxxx xxxx 1001 xxxx
+	 */
+	DECODE_TABLE	(0x0f0000f0, 0x01000090, arm_cccc_0001_____1001_table),
+
+	/*
+	 * Extra load/store instructions
+	 *			cccc 000x xxxx xxxx xxxx xxxx 1xx1 xxxx
+	 */
+	DECODE_TABLE	(0x0e000090, 0x00000090, arm_cccc_000x_____1xx1_table),
+
+	/*
+	 * Data-processing (register)
+	 *			cccc 000x xxxx xxxx xxxx xxxx xxx0 xxxx
+	 * Data-processing (register-shifted register)
+	 *			cccc 000x xxxx xxxx xxxx xxxx 0xx1 xxxx
+	 */
+	DECODE_TABLE	(0x0e000000, 0x00000000, arm_cccc_000x_table),
+
+	/*
+	 * Data-processing (immediate)
+	 *			cccc 001x xxxx xxxx xxxx xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0x0e000000, 0x02000000, arm_cccc_001x_table),
+
+	/*
+	 * Media instructions
+	 *			cccc 011x xxxx xxxx xxxx xxxx xxx1 xxxx
+	 */
+	DECODE_TABLE	(0x0f000010, 0x06000010, arm_cccc_0110_____xxx1_table),
+	DECODE_TABLE	(0x0f000010, 0x07000010, arm_cccc_0111_____xxx1_table),
+
+	/*
+	 * Load/store word and unsigned byte
+	 *			cccc 01xx xxxx xxxx xxxx xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0x0c000000, 0x04000000, arm_cccc_01xx_table),
+
+	/*
+	 * Block data transfer instructions
+	 *			cccc 100x xxxx xxxx xxxx xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0x0e000000, 0x08000000, arm_cccc_100x_table),
+
+	/* B			cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */
+	/* BL			cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */
+	DECODE_SIMULATE	(0x0e000000, 0x0a000000, PROBES_BRANCH),
+
+	/*
+	 * Supervisor Call, and coprocessor instructions
+	 */
+
+	/* MCRR			cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx */
+	/* MRRC			cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx */
+	/* LDC			cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+	/* STC			cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+	/* CDP			cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+	/* MCR			cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+	/* MRC			cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
+	/* SVC			cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0x0c000000, 0x0c000000),
+
+	DECODE_END
+};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(probes_decode_arm_table);
+#endif
+
+static void __kprobes arm_singlestep(probes_opcode_t insn,
+		struct arch_probes_insn *asi, struct pt_regs *regs)
+{
+	regs->ARM_pc += 4;
+	asi->insn_handler(insn, asi, regs);
+}
+
+/* Return:
+ *   INSN_REJECTED     If instruction is one not allowed to kprobe,
+ *   INSN_GOOD         If instruction is supported and uses instruction slot,
+ *   INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
+ *
+ * For instructions we don't want to kprobe (INSN_REJECTED return result):
+ *   These are generally ones that modify the processor state making
+ *   them "hard" to simulate such as switches processor modes or
+ *   make accesses in alternate modes.  Any of these could be simulated
+ *   if the work was put into it, but low return considering they
+ *   should also be very rare.
+ */
+enum probes_insn __kprobes
+arm_probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi,
+		       bool emulate, const union decode_action *actions)
+{
+	asi->insn_singlestep = arm_singlestep;
+	asi->insn_check_cc = probes_condition_checks[insn>>28];
+	return probes_decode_insn(insn, asi, probes_decode_arm_table, false,
+				  emulate, actions);
+}
diff --git a/arch/arm/kernel/probes-arm.h b/arch/arm/kernel/probes-arm.h
new file mode 100644
index 000000000000..ace6572f6e26
--- /dev/null
+++ b/arch/arm/kernel/probes-arm.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/kernel/probes-arm.h
+ *
+ * Copyright 2013 Linaro Ltd.
+ * Written by: David A. Long
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef _ARM_KERNEL_PROBES_ARM_H
+#define  _ARM_KERNEL_PROBES_ARM_H
+
+enum probes_arm_action {
+	PROBES_EMULATE_NONE,
+	PROBES_SIMULATE_NOP,
+	PROBES_PRELOAD_IMM,
+	PROBES_PRELOAD_REG,
+	PROBES_BRANCH_IMM,
+	PROBES_BRANCH_REG,
+	PROBES_MRS,
+	PROBES_CLZ,
+	PROBES_SATURATING_ARITHMETIC,
+	PROBES_MUL1,
+	PROBES_MUL2,
+	PROBES_SWP,
+	PROBES_LDRSTRD,
+	PROBES_LOAD,
+	PROBES_STORE,
+	PROBES_LOAD_EXTRA,
+	PROBES_STORE_EXTRA,
+	PROBES_MOV_IP_SP,
+	PROBES_DATA_PROCESSING_REG,
+	PROBES_DATA_PROCESSING_IMM,
+	PROBES_MOV_HALFWORD,
+	PROBES_SEV,
+	PROBES_WFE,
+	PROBES_SATURATE,
+	PROBES_REV,
+	PROBES_MMI,
+	PROBES_PACK,
+	PROBES_EXTEND,
+	PROBES_EXTEND_ADD,
+	PROBES_MUL_ADD_LONG,
+	PROBES_MUL_ADD,
+	PROBES_BITFIELD,
+	PROBES_BRANCH,
+	PROBES_LDMSTM,
+	NUM_PROBES_ARM_ACTIONS
+};
+
+void __kprobes simulate_bbl(probes_opcode_t opcode,
+	struct arch_probes_insn *asi, struct pt_regs *regs);
+void __kprobes simulate_blx1(probes_opcode_t opcode,
+	struct arch_probes_insn *asi, struct pt_regs *regs);
+void __kprobes simulate_blx2bx(probes_opcode_t opcode,
+	struct arch_probes_insn *asi, struct pt_regs *regs);
+void __kprobes simulate_mrs(probes_opcode_t opcode,
+	struct arch_probes_insn *asi, struct pt_regs *regs);
+void __kprobes simulate_mov_ipsp(probes_opcode_t opcode,
+	struct arch_probes_insn *asi, struct pt_regs *regs);
+
+extern const union decode_item probes_decode_arm_table[];
+
+enum probes_insn arm_probes_decode_insn(probes_opcode_t,
+		struct arch_probes_insn *, bool emulate,
+		const union decode_action *actions);
+
+#endif
diff --git a/arch/arm/kernel/probes-thumb.c b/arch/arm/kernel/probes-thumb.c
new file mode 100644
index 000000000000..4131351e812f
--- /dev/null
+++ b/arch/arm/kernel/probes-thumb.c
@@ -0,0 +1,882 @@
+/*
+ * arch/arm/kernel/probes-thumb.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "probes.h"
+#include "probes-thumb.h"
+
+
+static const union decode_item t32_table_1110_100x_x0xx[] = {
+	/* Load/store multiple instructions */
+
+	/* Rn is PC		1110 100x x0xx 1111 xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xfe4f0000, 0xe80f0000),
+
+	/* SRS			1110 1000 00x0 xxxx xxxx xxxx xxxx xxxx */
+	/* RFE			1110 1000 00x1 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xffc00000, 0xe8000000),
+	/* SRS			1110 1001 10x0 xxxx xxxx xxxx xxxx xxxx */
+	/* RFE			1110 1001 10x1 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xffc00000, 0xe9800000),
+
+	/* STM Rn, {...pc}	1110 100x x0x0 xxxx 1xxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xfe508000, 0xe8008000),
+	/* LDM Rn, {...lr,pc}	1110 100x x0x1 xxxx 11xx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xfe50c000, 0xe810c000),
+	/* LDM/STM Rn, {...sp}	1110 100x x0xx xxxx xx1x xxxx xxxx xxxx */
+	DECODE_REJECT	(0xfe402000, 0xe8002000),
+
+	/* STMIA		1110 1000 10x0 xxxx xxxx xxxx xxxx xxxx */
+	/* LDMIA		1110 1000 10x1 xxxx xxxx xxxx xxxx xxxx */
+	/* STMDB		1110 1001 00x0 xxxx xxxx xxxx xxxx xxxx */
+	/* LDMDB		1110 1001 00x1 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_CUSTOM	(0xfe400000, 0xe8000000, PROBES_T32_LDMSTM),
+
+	DECODE_END
+};
+
+static const union decode_item t32_table_1110_100x_x1xx[] = {
+	/* Load/store dual, load/store exclusive, table branch */
+
+	/* STRD (immediate)	1110 1000 x110 xxxx xxxx xxxx xxxx xxxx */
+	/* LDRD (immediate)	1110 1000 x111 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_OR	(0xff600000, 0xe8600000),
+	/* STRD (immediate)	1110 1001 x1x0 xxxx xxxx xxxx xxxx xxxx */
+	/* LDRD (immediate)	1110 1001 x1x1 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xff400000, 0xe9400000, PROBES_T32_LDRDSTRD,
+						 REGS(NOPCWB, NOSPPC, NOSPPC, 0, 0)),
+
+	/* TBB			1110 1000 1101 xxxx xxxx xxxx 0000 xxxx */
+	/* TBH			1110 1000 1101 xxxx xxxx xxxx 0001 xxxx */
+	DECODE_SIMULATEX(0xfff000e0, 0xe8d00000, PROBES_T32_TABLE_BRANCH,
+						 REGS(NOSP, 0, 0, 0, NOSPPC)),
+
+	/* STREX		1110 1000 0100 xxxx xxxx xxxx xxxx xxxx */
+	/* LDREX		1110 1000 0101 xxxx xxxx xxxx xxxx xxxx */
+	/* STREXB		1110 1000 1100 xxxx xxxx xxxx 0100 xxxx */
+	/* STREXH		1110 1000 1100 xxxx xxxx xxxx 0101 xxxx */
+	/* STREXD		1110 1000 1100 xxxx xxxx xxxx 0111 xxxx */
+	/* LDREXB		1110 1000 1101 xxxx xxxx xxxx 0100 xxxx */
+	/* LDREXH		1110 1000 1101 xxxx xxxx xxxx 0101 xxxx */
+	/* LDREXD		1110 1000 1101 xxxx xxxx xxxx 0111 xxxx */
+	/* And unallocated instructions...				*/
+	DECODE_END
+};
+
+static const union decode_item t32_table_1110_101x[] = {
+	/* Data-processing (shifted register)				*/
+
+	/* TST			1110 1010 0001 xxxx xxxx 1111 xxxx xxxx */
+	/* TEQ			1110 1010 1001 xxxx xxxx 1111 xxxx xxxx */
+	DECODE_EMULATEX	(0xff700f00, 0xea100f00, PROBES_T32_TST,
+						 REGS(NOSPPC, 0, 0, 0, NOSPPC)),
+
+	/* CMN			1110 1011 0001 xxxx xxxx 1111 xxxx xxxx */
+	DECODE_OR	(0xfff00f00, 0xeb100f00),
+	/* CMP			1110 1011 1011 xxxx xxxx 1111 xxxx xxxx */
+	DECODE_EMULATEX	(0xfff00f00, 0xebb00f00, PROBES_T32_TST,
+						 REGS(NOPC, 0, 0, 0, NOSPPC)),
+
+	/* MOV			1110 1010 010x 1111 xxxx xxxx xxxx xxxx */
+	/* MVN			1110 1010 011x 1111 xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xffcf0000, 0xea4f0000, PROBES_T32_MOV,
+						 REGS(0, 0, NOSPPC, 0, NOSPPC)),
+
+	/* ???			1110 1010 101x xxxx xxxx xxxx xxxx xxxx */
+	/* ???			1110 1010 111x xxxx xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xffa00000, 0xeaa00000),
+	/* ???			1110 1011 001x xxxx xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xffe00000, 0xeb200000),
+	/* ???			1110 1011 100x xxxx xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xffe00000, 0xeb800000),
+	/* ???			1110 1011 111x xxxx xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xffe00000, 0xebe00000),
+
+	/* ADD/SUB SP, SP, Rm, LSL #0..3				*/
+	/*			1110 1011 x0xx 1101 x000 1101 xx00 xxxx */
+	DECODE_EMULATEX	(0xff4f7f30, 0xeb0d0d00, PROBES_T32_ADDSUB,
+						 REGS(SP, 0, SP, 0, NOSPPC)),
+
+	/* ADD/SUB SP, SP, Rm, shift					*/
+	/*			1110 1011 x0xx 1101 xxxx 1101 xxxx xxxx */
+	DECODE_REJECT	(0xff4f0f00, 0xeb0d0d00),
+
+	/* ADD/SUB Rd, SP, Rm, shift					*/
+	/*			1110 1011 x0xx 1101 xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xff4f0000, 0xeb0d0000, PROBES_T32_ADDSUB,
+						 REGS(SP, 0, NOPC, 0, NOSPPC)),
+
+	/* AND			1110 1010 000x xxxx xxxx xxxx xxxx xxxx */
+	/* BIC			1110 1010 001x xxxx xxxx xxxx xxxx xxxx */
+	/* ORR			1110 1010 010x xxxx xxxx xxxx xxxx xxxx */
+	/* ORN			1110 1010 011x xxxx xxxx xxxx xxxx xxxx */
+	/* EOR			1110 1010 100x xxxx xxxx xxxx xxxx xxxx */
+	/* PKH			1110 1010 110x xxxx xxxx xxxx xxxx xxxx */
+	/* ADD			1110 1011 000x xxxx xxxx xxxx xxxx xxxx */
+	/* ADC			1110 1011 010x xxxx xxxx xxxx xxxx xxxx */
+	/* SBC			1110 1011 011x xxxx xxxx xxxx xxxx xxxx */
+	/* SUB			1110 1011 101x xxxx xxxx xxxx xxxx xxxx */
+	/* RSB			1110 1011 110x xxxx xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xfe000000, 0xea000000, PROBES_T32_LOGICAL,
+						 REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)),
+
+	DECODE_END
+};
+
+static const union decode_item t32_table_1111_0x0x___0[] = {
+	/* Data-processing (modified immediate)				*/
+
+	/* TST			1111 0x00 0001 xxxx 0xxx 1111 xxxx xxxx */
+	/* TEQ			1111 0x00 1001 xxxx 0xxx 1111 xxxx xxxx */
+	DECODE_EMULATEX	(0xfb708f00, 0xf0100f00, PROBES_T32_TST,
+						 REGS(NOSPPC, 0, 0, 0, 0)),
+
+	/* CMN			1111 0x01 0001 xxxx 0xxx 1111 xxxx xxxx */
+	DECODE_OR	(0xfbf08f00, 0xf1100f00),
+	/* CMP			1111 0x01 1011 xxxx 0xxx 1111 xxxx xxxx */
+	DECODE_EMULATEX	(0xfbf08f00, 0xf1b00f00, PROBES_T32_CMP,
+						 REGS(NOPC, 0, 0, 0, 0)),
+
+	/* MOV			1111 0x00 010x 1111 0xxx xxxx xxxx xxxx */
+	/* MVN			1111 0x00 011x 1111 0xxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xfbcf8000, 0xf04f0000, PROBES_T32_MOV,
+						 REGS(0, 0, NOSPPC, 0, 0)),
+
+	/* ???			1111 0x00 101x xxxx 0xxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xfbe08000, 0xf0a00000),
+	/* ???			1111 0x00 110x xxxx 0xxx xxxx xxxx xxxx */
+	/* ???			1111 0x00 111x xxxx 0xxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xfbc08000, 0xf0c00000),
+	/* ???			1111 0x01 001x xxxx 0xxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xfbe08000, 0xf1200000),
+	/* ???			1111 0x01 100x xxxx 0xxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xfbe08000, 0xf1800000),
+	/* ???			1111 0x01 111x xxxx 0xxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xfbe08000, 0xf1e00000),
+
+	/* ADD Rd, SP, #imm	1111 0x01 000x 1101 0xxx xxxx xxxx xxxx */
+	/* SUB Rd, SP, #imm	1111 0x01 101x 1101 0xxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xfb4f8000, 0xf10d0000, PROBES_T32_ADDSUB,
+						 REGS(SP, 0, NOPC, 0, 0)),
+
+	/* AND			1111 0x00 000x xxxx 0xxx xxxx xxxx xxxx */
+	/* BIC			1111 0x00 001x xxxx 0xxx xxxx xxxx xxxx */
+	/* ORR			1111 0x00 010x xxxx 0xxx xxxx xxxx xxxx */
+	/* ORN			1111 0x00 011x xxxx 0xxx xxxx xxxx xxxx */
+	/* EOR			1111 0x00 100x xxxx 0xxx xxxx xxxx xxxx */
+	/* ADD			1111 0x01 000x xxxx 0xxx xxxx xxxx xxxx */
+	/* ADC			1111 0x01 010x xxxx 0xxx xxxx xxxx xxxx */
+	/* SBC			1111 0x01 011x xxxx 0xxx xxxx xxxx xxxx */
+	/* SUB			1111 0x01 101x xxxx 0xxx xxxx xxxx xxxx */
+	/* RSB			1111 0x01 110x xxxx 0xxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xfa008000, 0xf0000000, PROBES_T32_LOGICAL,
+						 REGS(NOSPPC, 0, NOSPPC, 0, 0)),
+
+	DECODE_END
+};
+
+static const union decode_item t32_table_1111_0x1x___0[] = {
+	/* Data-processing (plain binary immediate)			*/
+
+	/* ADDW Rd, PC, #imm	1111 0x10 0000 1111 0xxx xxxx xxxx xxxx */
+	DECODE_OR	(0xfbff8000, 0xf20f0000),
+	/* SUBW	Rd, PC, #imm	1111 0x10 1010 1111 0xxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xfbff8000, 0xf2af0000, PROBES_T32_ADDWSUBW_PC,
+						 REGS(PC, 0, NOSPPC, 0, 0)),
+
+	/* ADDW SP, SP, #imm	1111 0x10 0000 1101 0xxx 1101 xxxx xxxx */
+	DECODE_OR	(0xfbff8f00, 0xf20d0d00),
+	/* SUBW	SP, SP, #imm	1111 0x10 1010 1101 0xxx 1101 xxxx xxxx */
+	DECODE_EMULATEX	(0xfbff8f00, 0xf2ad0d00, PROBES_T32_ADDWSUBW,
+						 REGS(SP, 0, SP, 0, 0)),
+
+	/* ADDW			1111 0x10 0000 xxxx 0xxx xxxx xxxx xxxx */
+	DECODE_OR	(0xfbf08000, 0xf2000000),
+	/* SUBW			1111 0x10 1010 xxxx 0xxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xfbf08000, 0xf2a00000, PROBES_T32_ADDWSUBW,
+						 REGS(NOPCX, 0, NOSPPC, 0, 0)),
+
+	/* MOVW			1111 0x10 0100 xxxx 0xxx xxxx xxxx xxxx */
+	/* MOVT			1111 0x10 1100 xxxx 0xxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xfb708000, 0xf2400000, PROBES_T32_MOVW,
+						 REGS(0, 0, NOSPPC, 0, 0)),
+
+	/* SSAT16		1111 0x11 0010 xxxx 0000 xxxx 00xx xxxx */
+	/* SSAT			1111 0x11 00x0 xxxx 0xxx xxxx xxxx xxxx */
+	/* USAT16		1111 0x11 1010 xxxx 0000 xxxx 00xx xxxx */
+	/* USAT			1111 0x11 10x0 xxxx 0xxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xfb508000, 0xf3000000, PROBES_T32_SAT,
+						 REGS(NOSPPC, 0, NOSPPC, 0, 0)),
+
+	/* SFBX			1111 0x11 0100 xxxx 0xxx xxxx xxxx xxxx */
+	/* UFBX			1111 0x11 1100 xxxx 0xxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xfb708000, 0xf3400000, PROBES_T32_BITFIELD,
+						 REGS(NOSPPC, 0, NOSPPC, 0, 0)),
+
+	/* BFC			1111 0x11 0110 1111 0xxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xfbff8000, 0xf36f0000, PROBES_T32_BITFIELD,
+						 REGS(0, 0, NOSPPC, 0, 0)),
+
+	/* BFI			1111 0x11 0110 xxxx 0xxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xfbf08000, 0xf3600000, PROBES_T32_BITFIELD,
+						 REGS(NOSPPCX, 0, NOSPPC, 0, 0)),
+
+	DECODE_END
+};
+
+static const union decode_item t32_table_1111_0xxx___1[] = {
+	/* Branches and miscellaneous control				*/
+
+	/* YIELD		1111 0011 1010 xxxx 10x0 x000 0000 0001 */
+	DECODE_OR	(0xfff0d7ff, 0xf3a08001),
+	/* SEV			1111 0011 1010 xxxx 10x0 x000 0000 0100 */
+	DECODE_EMULATE	(0xfff0d7ff, 0xf3a08004, PROBES_T32_SEV),
+	/* NOP			1111 0011 1010 xxxx 10x0 x000 0000 0000 */
+	/* WFE			1111 0011 1010 xxxx 10x0 x000 0000 0010 */
+	/* WFI			1111 0011 1010 xxxx 10x0 x000 0000 0011 */
+	DECODE_SIMULATE	(0xfff0d7fc, 0xf3a08000, PROBES_T32_WFE),
+
+	/* MRS Rd, CPSR		1111 0011 1110 xxxx 10x0 xxxx xxxx xxxx */
+	DECODE_SIMULATEX(0xfff0d000, 0xf3e08000, PROBES_T32_MRS,
+						 REGS(0, 0, NOSPPC, 0, 0)),
+
+	/*
+	 * Unsupported instructions
+	 *			1111 0x11 1xxx xxxx 10x0 xxxx xxxx xxxx
+	 *
+	 * MSR			1111 0011 100x xxxx 10x0 xxxx xxxx xxxx
+	 * DBG hint		1111 0011 1010 xxxx 10x0 x000 1111 xxxx
+	 * Unallocated hints	1111 0011 1010 xxxx 10x0 x000 xxxx xxxx
+	 * CPS			1111 0011 1010 xxxx 10x0 xxxx xxxx xxxx
+	 * CLREX/DSB/DMB/ISB	1111 0011 1011 xxxx 10x0 xxxx xxxx xxxx
+	 * BXJ			1111 0011 1100 xxxx 10x0 xxxx xxxx xxxx
+	 * SUBS PC,LR,#<imm8>	1111 0011 1101 xxxx 10x0 xxxx xxxx xxxx
+	 * MRS Rd, SPSR		1111 0011 1111 xxxx 10x0 xxxx xxxx xxxx
+	 * SMC			1111 0111 1111 xxxx 1000 xxxx xxxx xxxx
+	 * UNDEFINED		1111 0111 1111 xxxx 1010 xxxx xxxx xxxx
+	 * ???			1111 0111 1xxx xxxx 1010 xxxx xxxx xxxx
+	 */
+	DECODE_REJECT	(0xfb80d000, 0xf3808000),
+
+	/* Bcc			1111 0xxx xxxx xxxx 10x0 xxxx xxxx xxxx */
+	DECODE_CUSTOM	(0xf800d000, 0xf0008000, PROBES_T32_BRANCH_COND),
+
+	/* BLX			1111 0xxx xxxx xxxx 11x0 xxxx xxxx xxx0 */
+	DECODE_OR	(0xf800d001, 0xf000c000),
+	/* B			1111 0xxx xxxx xxxx 10x1 xxxx xxxx xxxx */
+	/* BL			1111 0xxx xxxx xxxx 11x1 xxxx xxxx xxxx */
+	DECODE_SIMULATE	(0xf8009000, 0xf0009000, PROBES_T32_BRANCH),
+
+	DECODE_END
+};
+
+static const union decode_item t32_table_1111_100x_x0x1__1111[] = {
+	/* Memory hints							*/
+
+	/* PLD (literal)	1111 1000 x001 1111 1111 xxxx xxxx xxxx */
+	/* PLI (literal)	1111 1001 x001 1111 1111 xxxx xxxx xxxx */
+	DECODE_SIMULATE	(0xfe7ff000, 0xf81ff000, PROBES_T32_PLDI),
+
+	/* PLD{W} (immediate)	1111 1000 10x1 xxxx 1111 xxxx xxxx xxxx */
+	DECODE_OR	(0xffd0f000, 0xf890f000),
+	/* PLD{W} (immediate)	1111 1000 00x1 xxxx 1111 1100 xxxx xxxx */
+	DECODE_OR	(0xffd0ff00, 0xf810fc00),
+	/* PLI (immediate)	1111 1001 1001 xxxx 1111 xxxx xxxx xxxx */
+	DECODE_OR	(0xfff0f000, 0xf990f000),
+	/* PLI (immediate)	1111 1001 0001 xxxx 1111 1100 xxxx xxxx */
+	DECODE_SIMULATEX(0xfff0ff00, 0xf910fc00, PROBES_T32_PLDI,
+						 REGS(NOPCX, 0, 0, 0, 0)),
+
+	/* PLD{W} (register)	1111 1000 00x1 xxxx 1111 0000 00xx xxxx */
+	DECODE_OR	(0xffd0ffc0, 0xf810f000),
+	/* PLI (register)	1111 1001 0001 xxxx 1111 0000 00xx xxxx */
+	DECODE_SIMULATEX(0xfff0ffc0, 0xf910f000, PROBES_T32_PLDI,
+						 REGS(NOPCX, 0, 0, 0, NOSPPC)),
+
+	/* Other unallocated instructions...				*/
+	DECODE_END
+};
+
+static const union decode_item t32_table_1111_100x[] = {
+	/* Store/Load single data item					*/
+
+	/* ???			1111 100x x11x xxxx xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xfe600000, 0xf8600000),
+
+	/* ???			1111 1001 0101 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xfff00000, 0xf9500000),
+
+	/* ???			1111 100x 0xxx xxxx xxxx 10x0 xxxx xxxx */
+	DECODE_REJECT	(0xfe800d00, 0xf8000800),
+
+	/* STRBT		1111 1000 0000 xxxx xxxx 1110 xxxx xxxx */
+	/* STRHT		1111 1000 0010 xxxx xxxx 1110 xxxx xxxx */
+	/* STRT			1111 1000 0100 xxxx xxxx 1110 xxxx xxxx */
+	/* LDRBT		1111 1000 0001 xxxx xxxx 1110 xxxx xxxx */
+	/* LDRSBT		1111 1001 0001 xxxx xxxx 1110 xxxx xxxx */
+	/* LDRHT		1111 1000 0011 xxxx xxxx 1110 xxxx xxxx */
+	/* LDRSHT		1111 1001 0011 xxxx xxxx 1110 xxxx xxxx */
+	/* LDRT			1111 1000 0101 xxxx xxxx 1110 xxxx xxxx */
+	DECODE_REJECT	(0xfe800f00, 0xf8000e00),
+
+	/* STR{,B,H} Rn,[PC...]	1111 1000 xxx0 1111 xxxx xxxx xxxx xxxx */
+	DECODE_REJECT	(0xff1f0000, 0xf80f0000),
+
+	/* STR{,B,H} PC,[Rn...]	1111 1000 xxx0 xxxx 1111 xxxx xxxx xxxx */
+	DECODE_REJECT	(0xff10f000, 0xf800f000),
+
+	/* LDR (literal)	1111 1000 x101 1111 xxxx xxxx xxxx xxxx */
+	DECODE_SIMULATEX(0xff7f0000, 0xf85f0000, PROBES_T32_LDR_LIT,
+						 REGS(PC, ANY, 0, 0, 0)),
+
+	/* STR (immediate)	1111 1000 0100 xxxx xxxx 1xxx xxxx xxxx */
+	/* LDR (immediate)	1111 1000 0101 xxxx xxxx 1xxx xxxx xxxx */
+	DECODE_OR	(0xffe00800, 0xf8400800),
+	/* STR (immediate)	1111 1000 1100 xxxx xxxx xxxx xxxx xxxx */
+	/* LDR (immediate)	1111 1000 1101 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xffe00000, 0xf8c00000, PROBES_T32_LDRSTR,
+						 REGS(NOPCX, ANY, 0, 0, 0)),
+
+	/* STR (register)	1111 1000 0100 xxxx xxxx 0000 00xx xxxx */
+	/* LDR (register)	1111 1000 0101 xxxx xxxx 0000 00xx xxxx */
+	DECODE_EMULATEX	(0xffe00fc0, 0xf8400000, PROBES_T32_LDRSTR,
+						 REGS(NOPCX, ANY, 0, 0, NOSPPC)),
+
+	/* LDRB (literal)	1111 1000 x001 1111 xxxx xxxx xxxx xxxx */
+	/* LDRSB (literal)	1111 1001 x001 1111 xxxx xxxx xxxx xxxx */
+	/* LDRH (literal)	1111 1000 x011 1111 xxxx xxxx xxxx xxxx */
+	/* LDRSH (literal)	1111 1001 x011 1111 xxxx xxxx xxxx xxxx */
+	DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, PROBES_T32_LDR_LIT,
+						 REGS(PC, NOSPPCX, 0, 0, 0)),
+
+	/* STRB (immediate)	1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */
+	/* STRH (immediate)	1111 1000 0010 xxxx xxxx 1xxx xxxx xxxx */
+	/* LDRB (immediate)	1111 1000 0001 xxxx xxxx 1xxx xxxx xxxx */
+	/* LDRSB (immediate)	1111 1001 0001 xxxx xxxx 1xxx xxxx xxxx */
+	/* LDRH (immediate)	1111 1000 0011 xxxx xxxx 1xxx xxxx xxxx */
+	/* LDRSH (immediate)	1111 1001 0011 xxxx xxxx 1xxx xxxx xxxx */
+	DECODE_OR	(0xfec00800, 0xf8000800),
+	/* STRB (immediate)	1111 1000 1000 xxxx xxxx xxxx xxxx xxxx */
+	/* STRH (immediate)	1111 1000 1010 xxxx xxxx xxxx xxxx xxxx */
+	/* LDRB (immediate)	1111 1000 1001 xxxx xxxx xxxx xxxx xxxx */
+	/* LDRSB (immediate)	1111 1001 1001 xxxx xxxx xxxx xxxx xxxx */
+	/* LDRH (immediate)	1111 1000 1011 xxxx xxxx xxxx xxxx xxxx */
+	/* LDRSH (immediate)	1111 1001 1011 xxxx xxxx xxxx xxxx xxxx */
+	DECODE_EMULATEX	(0xfec00000, 0xf8800000, PROBES_T32_LDRSTR,
+						 REGS(NOPCX, NOSPPCX, 0, 0, 0)),
+
+	/* STRB (register)	1111 1000 0000 xxxx xxxx 0000 00xx xxxx */
+	/* STRH (register)	1111 1000 0010 xxxx xxxx 0000 00xx xxxx */
+	/* LDRB (register)	1111 1000 0001 xxxx xxxx 0000 00xx xxxx */
+	/* LDRSB (register)	1111 1001 0001 xxxx xxxx 0000 00xx xxxx */
+	/* LDRH (register)	1111 1000 0011 xxxx xxxx 0000 00xx xxxx */
+	/* LDRSH (register)	1111 1001 0011 xxxx xxxx 0000 00xx xxxx */
+	DECODE_EMULATEX	(0xfe800fc0, 0xf8000000, PROBES_T32_LDRSTR,
+						 REGS(NOPCX, NOSPPCX, 0, 0, NOSPPC)),
+
+	/* Other unallocated instructions...				*/
+	DECODE_END
+};
+
+static const union decode_item t32_table_1111_1010___1111[] = {
+	/* Data-processing (register)					*/
+
+	/* ???			1111 1010 011x xxxx 1111 xxxx 1xxx xxxx */
+	DECODE_REJECT	(0xffe0f080, 0xfa60f080),
+
+	/* SXTH			1111 1010 0000 1111 1111 xxxx 1xxx xxxx */
+	/* UXTH			1111 1010 0001 1111 1111 xxxx 1xxx xxxx */
+	/* SXTB16		1111 1010 0010 1111 1111 xxxx 1xxx xxxx */
+	/* UXTB16		1111 1010 0011 1111 1111 xxxx 1xxx xxxx */
+	/* SXTB			1111 1010 0100 1111 1111 xxxx 1xxx xxxx */
+	/* UXTB			1111 1010 0101 1111 1111 xxxx 1xxx xxxx */
+	DECODE_EMULATEX	(0xff8ff080, 0xfa0ff080, PROBES_T32_SIGN_EXTEND,
+						 REGS(0, 0, NOSPPC, 0, NOSPPC)),
+
+
+	/* ???			1111 1010 1xxx xxxx 1111 xxxx 0x11 xxxx */
+	DECODE_REJECT	(0xff80f0b0, 0xfa80f030),
+	/* ???			1111 1010 1x11 xxxx 1111 xxxx 0xxx xxxx */
+	DECODE_REJECT	(0xffb0f080, 0xfab0f000),
+
+	/* SADD16		1111 1010 1001 xxxx 1111 xxxx 0000 xxxx */
+	/* SASX			1111 1010 1010 xxxx 1111 xxxx 0000 xxxx */
+	/* SSAX			1111 1010 1110 xxxx 1111 xxxx 0000 xxxx */
+	/* SSUB16		1111 1010 1101 xxxx 1111 xxxx 0000 xxxx */
+	/* SADD8		1111 1010 1000 xxxx 1111 xxxx 0000 xxxx */
+	/* SSUB8		1111 1010 1100 xxxx 1111 xxxx 0000 xxxx */
+
+	/* QADD16		1111 1010 1001 xxxx 1111 xxxx 0001 xxxx */
+	/* QASX			1111 1010 1010 xxxx 1111 xxxx 0001 xxxx */
+	/* QSAX			1111 1010 1110 xxxx 1111 xxxx 0001 xxxx */
+	/* QSUB16		1111 1010 1101 xxxx 1111 xxxx 0001 xxxx */
+	/* QADD8		1111 1010 1000 xxxx 1111 xxxx 0001 xxxx */
+	/* QSUB8		1111 1010 1100 xxxx 1111 xxxx 0001 xxxx */
+
+	/* SHADD16		1111 1010 1001 xxxx 1111 xxxx 0010 xxxx */
+	/* SHASX		1111 1010 1010 xxxx 1111 xxxx 0010 xxxx */
+	/* SHSAX		1111 1010 1110 xxxx 1111 xxxx 0010 xxxx */
+	/* SHSUB16		1111 1010 1101 xxxx 1111 xxxx 0010 xxxx */
+	/* SHADD8		1111 1010 1000 xxxx 1111 xxxx 0010 xxxx */
+	/* SHSUB8		1111 1010 1100 xxxx 1111 xxxx 0010 xxxx */
+
+	/* UADD16		1111 1010 1001 xxxx 1111 xxxx 0100 xxxx */
+	/* UASX			1111 1010 1010 xxxx 1111 xxxx 0100 xxxx */
+	/* USAX			1111 1010 1110 xxxx 1111 xxxx 0100 xxxx */
+	/* USUB16		1111 1010 1101 xxxx 1111 xxxx 0100 xxxx */
+	/* UADD8		1111 1010 1000 xxxx 1111 xxxx 0100 xxxx */
+	/* USUB8		1111 1010 1100 xxxx 1111 xxxx 0100 xxxx */
+
+	/* UQADD16		1111 1010 1001 xxxx 1111 xxxx 0101 xxxx */
+	/* UQASX		1111 1010 1010 xxxx 1111 xxxx 0101 xxxx */
+	/* UQSAX		1111 1010 1110 xxxx 1111 xxxx 0101 xxxx */
+	/* UQSUB16		1111 1010 1101 xxxx 1111 xxxx 0101 xxxx */
+	/* UQADD8		1111 1010 1000 xxxx 1111 xxxx 0101 xxxx */
+	/* UQSUB8		1111 1010 1100 xxxx 1111 xxxx 0101 xxxx */
+
+	/* UHADD16		1111 1010 1001 xxxx 1111 xxxx 0110 xxxx */
+	/* UHASX		1111 1010 1010 xxxx 1111 xxxx 0110 xxxx */
+	/* UHSAX		1111 1010 1110 xxxx 1111 xxxx 0110 xxxx */
+	/* UHSUB16		1111 1010 1101 xxxx 1111 xxxx 0110 xxxx */
+	/* UHADD8		1111 1010 1000 xxxx 1111 xxxx 0110 xxxx */
+	/* UHSUB8		1111 1010 1100 xxxx 1111 xxxx 0110 xxxx */
+	DECODE_OR	(0xff80f080, 0xfa80f000),
+
+	/* SXTAH		1111 1010 0000 xxxx 1111 xxxx 1xxx xxxx */
+	/* UXTAH		1111 1010 0001 xxxx 1111 xxxx 1xxx xxxx */
+	/* SXTAB16		1111 1010 0010 xxxx 1111 xxxx 1xxx xxxx */
+	/* UXTAB16		1111 1010 0011 xxxx 1111 xxxx 1xxx xxxx */
+	/* SXTAB		1111 1010 0100 xxxx 1111 xxxx 1xxx xxxx */
+	/* UXTAB		1111 1010 0101 xxxx 1111 xxxx 1xxx xxxx */
+	DECODE_OR	(0xff80f080, 0xfa00f080),
+
+	/* QADD			1111 1010 1000 xxxx 1111 xxxx 1000 xxxx */
+	/* QDADD		1111 1010 1000 xxxx 1111 xxxx 1001 xxxx */
+	/* QSUB			1111 1010 1000 xxxx 1111 xxxx 1010 xxxx */
+	/* QDSUB		1111 1010 1000 xxxx 1111 xxxx 1011 xxxx */
+	DECODE_OR	(0xfff0f0c0, 0xfa80f080),
+
+	/* SEL			1111 1010 1010 xxxx 1111 xxxx 1000 xxxx */
+	DECODE_OR	(0xfff0f0f0, 0xfaa0f080),
+
+	/* LSL			1111 1010 000x xxxx 1111 xxxx 0000 xxxx */
+	/* LSR			1111 1010 001x xxxx 1111 xxxx 0000 xxxx */
+	/* ASR			1111 1010 010x xxxx 1111 xxxx 0000 xxxx */
+	/* ROR			1111 1010 011x xxxx 1111 xxxx 0000 xxxx */
+	DECODE_EMULATEX	(0xff80f0f0, 0xfa00f000, PROBES_T32_MEDIA,
+						 REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)),
+
+	/* CLZ			1111 1010 1010 xxxx 1111 xxxx 1000 xxxx */
+	DECODE_OR	(0xfff0f0f0, 0xfab0f080),
+
+	/* REV			1111 1010 1001 xxxx 1111 xxxx 1000 xxxx */
+	/* REV16		1111 1010 1001 xxxx 1111 xxxx 1001 xxxx */
+	/* RBIT			1111 1010 1001 xxxx 1111 xxxx 1010 xxxx */
+	/* REVSH		1111 1010 1001 xxxx 1111 xxxx 1011 xxxx */
+	DECODE_EMULATEX	(0xfff0f0c0, 0xfa90f080, PROBES_T32_REVERSE,
+						 REGS(NOSPPC, 0, NOSPPC, 0, SAMEAS16)),
+
+	/* Other unallocated instructions...				*/
+	DECODE_END
+};
+
+static const union decode_item t32_table_1111_1011_0[] = {
+	/* Multiply, multiply accumulate, and absolute difference	*/
+
+	/* ???			1111 1011 0000 xxxx 1111 xxxx 0001 xxxx */
+	DECODE_REJECT	(0xfff0f0f0, 0xfb00f010),
+	/* ???			1111 1011 0111 xxxx 1111 xxxx 0001 xxxx */
+	DECODE_REJECT	(0xfff0f0f0, 0xfb70f010),
+
+	/* SMULxy		1111 1011 0001 xxxx 1111 xxxx 00xx xxxx */
+	DECODE_OR	(0xfff0f0c0, 0xfb10f000),
+	/* MUL			1111 1011 0000 xxxx 1111 xxxx 0000 xxxx */
+	/* SMUAD{X}		1111 1011 0010 xxxx 1111 xxxx 000x xxxx */
+	/* SMULWy		1111 1011 0011 xxxx 1111 xxxx 000x xxxx */
+	/* SMUSD{X}		1111 1011 0100 xxxx 1111 xxxx 000x xxxx */
+	/* SMMUL{R}		1111 1011 0101 xxxx 1111 xxxx 000x xxxx */
+	/* USAD8		1111 1011 0111 xxxx 1111 xxxx 0000 xxxx */
+	DECODE_EMULATEX	(0xff80f0e0, 0xfb00f000, PROBES_T32_MUL_ADD,
+						 REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)),
+
+	/* ???			1111 1011 0111 xxxx xxxx xxxx 0001 xxxx */
+	DECODE_REJECT	(0xfff000f0, 0xfb700010),
+
+	/* SMLAxy		1111 1011 0001 xxxx xxxx xxxx 00xx xxxx */
+	DECODE_OR	(0xfff000c0, 0xfb100000),
+	/* MLA			1111 1011 0000 xxxx xxxx xxxx 0000 xxxx */
+	/* MLS			1111 1011 0000 xxxx xxxx xxxx 0001 xxxx */
+	/* SMLAD{X}		1111 1011 0010 xxxx xxxx xxxx 000x xxxx */
+	/* SMLAWy		1111 1011 0011 xxxx xxxx xxxx 000x xxxx */
+	/* SMLSD{X}		1111 1011 0100 xxxx xxxx xxxx 000x xxxx */
+	/* SMMLA{R}		1111 1011 0101 xxxx xxxx xxxx 000x xxxx */
+	/* SMMLS{R}		1111 1011 0110 xxxx xxxx xxxx 000x xxxx */
+	/* USADA8		1111 1011 0111 xxxx xxxx xxxx 0000 xxxx */
+	DECODE_EMULATEX	(0xff8000c0, 0xfb000000,  PROBES_T32_MUL_ADD2,
+						 REGS(NOSPPC, NOSPPCX, NOSPPC, 0, NOSPPC)),
+
+	/* Other unallocated instructions...				*/
+	DECODE_END
+};
+
+static const union decode_item t32_table_1111_1011_1[] = {
+	/* Long multiply, long multiply accumulate, and divide		*/
+
+	/* UMAAL		1111 1011 1110 xxxx xxxx xxxx 0110 xxxx */
+	DECODE_OR	(0xfff000f0, 0xfbe00060),
+	/* SMLALxy		1111 1011 1100 xxxx xxxx xxxx 10xx xxxx */
+	DECODE_OR	(0xfff000c0, 0xfbc00080),
+	/* SMLALD{X}		1111 1011 1100 xxxx xxxx xxxx 110x xxxx */
+	/* SMLSLD{X}		1111 1011 1101 xxxx xxxx xxxx 110x xxxx */
+	DECODE_OR	(0xffe000e0, 0xfbc000c0),
+	/* SMULL		1111 1011 1000 xxxx xxxx xxxx 0000 xxxx */
+	/* UMULL		1111 1011 1010 xxxx xxxx xxxx 0000 xxxx */
+	/* SMLAL		1111 1011 1100 xxxx xxxx xxxx 0000 xxxx */
+	/* UMLAL		1111 1011 1110 xxxx xxxx xxxx 0000 xxxx */
+	DECODE_EMULATEX	(0xff9000f0, 0xfb800000, PROBES_T32_MUL_ADD_LONG,
+						 REGS(NOSPPC, NOSPPC, NOSPPC, 0, NOSPPC)),
+
+	/* SDIV			1111 1011 1001 xxxx xxxx xxxx 1111 xxxx */
+	/* UDIV			1111 1011 1011 xxxx xxxx xxxx 1111 xxxx */
+	/* Other unallocated instructions...				*/
+	DECODE_END
+};
+
+const union decode_item probes_decode_thumb32_table[] = {
+
+	/*
+	 * Load/store multiple instructions
+	 *			1110 100x x0xx xxxx xxxx xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0xfe400000, 0xe8000000, t32_table_1110_100x_x0xx),
+
+	/*
+	 * Load/store dual, load/store exclusive, table branch
+	 *			1110 100x x1xx xxxx xxxx xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0xfe400000, 0xe8400000, t32_table_1110_100x_x1xx),
+
+	/*
+	 * Data-processing (shifted register)
+	 *			1110 101x xxxx xxxx xxxx xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0xfe000000, 0xea000000, t32_table_1110_101x),
+
+	/*
+	 * Coprocessor instructions
+	 *			1110 11xx xxxx xxxx xxxx xxxx xxxx xxxx
+	 */
+	DECODE_REJECT	(0xfc000000, 0xec000000),
+
+	/*
+	 * Data-processing (modified immediate)
+	 *			1111 0x0x xxxx xxxx 0xxx xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0xfa008000, 0xf0000000, t32_table_1111_0x0x___0),
+
+	/*
+	 * Data-processing (plain binary immediate)
+	 *			1111 0x1x xxxx xxxx 0xxx xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0xfa008000, 0xf2000000, t32_table_1111_0x1x___0),
+
+	/*
+	 * Branches and miscellaneous control
+	 *			1111 0xxx xxxx xxxx 1xxx xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0xf8008000, 0xf0008000, t32_table_1111_0xxx___1),
+
+	/*
+	 * Advanced SIMD element or structure load/store instructions
+	 *			1111 1001 xxx0 xxxx xxxx xxxx xxxx xxxx
+	 */
+	DECODE_REJECT	(0xff100000, 0xf9000000),
+
+	/*
+	 * Memory hints
+	 *			1111 100x x0x1 xxxx 1111 xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0xfe50f000, 0xf810f000, t32_table_1111_100x_x0x1__1111),
+
+	/*
+	 * Store single data item
+	 *			1111 1000 xxx0 xxxx xxxx xxxx xxxx xxxx
+	 * Load single data items
+	 *			1111 100x xxx1 xxxx xxxx xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0xfe000000, 0xf8000000, t32_table_1111_100x),
+
+	/*
+	 * Data-processing (register)
+	 *			1111 1010 xxxx xxxx 1111 xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0xff00f000, 0xfa00f000, t32_table_1111_1010___1111),
+
+	/*
+	 * Multiply, multiply accumulate, and absolute difference
+	 *			1111 1011 0xxx xxxx xxxx xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0xff800000, 0xfb000000, t32_table_1111_1011_0),
+
+	/*
+	 * Long multiply, long multiply accumulate, and divide
+	 *			1111 1011 1xxx xxxx xxxx xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0xff800000, 0xfb800000, t32_table_1111_1011_1),
+
+	/*
+	 * Coprocessor instructions
+	 *			1111 11xx xxxx xxxx xxxx xxxx xxxx xxxx
+	 */
+	DECODE_END
+};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(probes_decode_thumb32_table);
+#endif
+
+static const union decode_item t16_table_1011[] = {
+	/* Miscellaneous 16-bit instructions		    */
+
+	/* ADD (SP plus immediate)	1011 0000 0xxx xxxx */
+	/* SUB (SP minus immediate)	1011 0000 1xxx xxxx */
+	DECODE_SIMULATE	(0xff00, 0xb000, PROBES_T16_ADD_SP),
+
+	/* CBZ				1011 00x1 xxxx xxxx */
+	/* CBNZ				1011 10x1 xxxx xxxx */
+	DECODE_SIMULATE	(0xf500, 0xb100, PROBES_T16_CBZ),
+
+	/* SXTH				1011 0010 00xx xxxx */
+	/* SXTB				1011 0010 01xx xxxx */
+	/* UXTH				1011 0010 10xx xxxx */
+	/* UXTB				1011 0010 11xx xxxx */
+	/* REV				1011 1010 00xx xxxx */
+	/* REV16			1011 1010 01xx xxxx */
+	/* ???				1011 1010 10xx xxxx */
+	/* REVSH			1011 1010 11xx xxxx */
+	DECODE_REJECT	(0xffc0, 0xba80),
+	DECODE_EMULATE	(0xf500, 0xb000, PROBES_T16_SIGN_EXTEND),
+
+	/* PUSH				1011 010x xxxx xxxx */
+	DECODE_CUSTOM	(0xfe00, 0xb400, PROBES_T16_PUSH),
+	/* POP				1011 110x xxxx xxxx */
+	DECODE_CUSTOM	(0xfe00, 0xbc00, PROBES_T16_POP),
+
+	/*
+	 * If-Then, and hints
+	 *				1011 1111 xxxx xxxx
+	 */
+
+	/* YIELD			1011 1111 0001 0000 */
+	DECODE_OR	(0xffff, 0xbf10),
+	/* SEV				1011 1111 0100 0000 */
+	DECODE_EMULATE	(0xffff, 0xbf40, PROBES_T16_SEV),
+	/* NOP				1011 1111 0000 0000 */
+	/* WFE				1011 1111 0010 0000 */
+	/* WFI				1011 1111 0011 0000 */
+	DECODE_SIMULATE	(0xffcf, 0xbf00, PROBES_T16_WFE),
+	/* Unassigned hints		1011 1111 xxxx 0000 */
+	DECODE_REJECT	(0xff0f, 0xbf00),
+	/* IT				1011 1111 xxxx xxxx */
+	DECODE_CUSTOM	(0xff00, 0xbf00, PROBES_T16_IT),
+
+	/* SETEND			1011 0110 010x xxxx */
+	/* CPS				1011 0110 011x xxxx */
+	/* BKPT				1011 1110 xxxx xxxx */
+	/* And unallocated instructions...		    */
+	DECODE_END
+};
+
+const union decode_item probes_decode_thumb16_table[] = {
+
+	/*
+	 * Shift (immediate), add, subtract, move, and compare
+	 *				00xx xxxx xxxx xxxx
+	 */
+
+	/* CMP (immediate)		0010 1xxx xxxx xxxx */
+	DECODE_EMULATE	(0xf800, 0x2800, PROBES_T16_CMP),
+
+	/* ADD (register)		0001 100x xxxx xxxx */
+	/* SUB (register)		0001 101x xxxx xxxx */
+	/* LSL (immediate)		0000 0xxx xxxx xxxx */
+	/* LSR (immediate)		0000 1xxx xxxx xxxx */
+	/* ASR (immediate)		0001 0xxx xxxx xxxx */
+	/* ADD (immediate, Thumb)	0001 110x xxxx xxxx */
+	/* SUB (immediate, Thumb)	0001 111x xxxx xxxx */
+	/* MOV (immediate)		0010 0xxx xxxx xxxx */
+	/* ADD (immediate, Thumb)	0011 0xxx xxxx xxxx */
+	/* SUB (immediate, Thumb)	0011 1xxx xxxx xxxx */
+	DECODE_EMULATE	(0xc000, 0x0000, PROBES_T16_ADDSUB),
+
+	/*
+	 * 16-bit Thumb data-processing instructions
+	 *				0100 00xx xxxx xxxx
+	 */
+
+	/* TST (register)		0100 0010 00xx xxxx */
+	DECODE_EMULATE	(0xffc0, 0x4200, PROBES_T16_CMP),
+	/* CMP (register)		0100 0010 10xx xxxx */
+	/* CMN (register)		0100 0010 11xx xxxx */
+	DECODE_EMULATE	(0xff80, 0x4280, PROBES_T16_CMP),
+	/* AND (register)		0100 0000 00xx xxxx */
+	/* EOR (register)		0100 0000 01xx xxxx */
+	/* LSL (register)		0100 0000 10xx xxxx */
+	/* LSR (register)		0100 0000 11xx xxxx */
+	/* ASR (register)		0100 0001 00xx xxxx */
+	/* ADC (register)		0100 0001 01xx xxxx */
+	/* SBC (register)		0100 0001 10xx xxxx */
+	/* ROR (register)		0100 0001 11xx xxxx */
+	/* RSB (immediate)		0100 0010 01xx xxxx */
+	/* ORR (register)		0100 0011 00xx xxxx */
+	/* MUL				0100 0011 00xx xxxx */
+	/* BIC (register)		0100 0011 10xx xxxx */
+	/* MVN (register)		0100 0011 10xx xxxx */
+	DECODE_EMULATE	(0xfc00, 0x4000, PROBES_T16_LOGICAL),
+
+	/*
+	 * Special data instructions and branch and exchange
+	 *				0100 01xx xxxx xxxx
+	 */
+
+	/* BLX pc			0100 0111 1111 1xxx */
+	DECODE_REJECT	(0xfff8, 0x47f8),
+
+	/* BX (register)		0100 0111 0xxx xxxx */
+	/* BLX (register)		0100 0111 1xxx xxxx */
+	DECODE_SIMULATE (0xff00, 0x4700, PROBES_T16_BLX),
+
+	/* ADD pc, pc			0100 0100 1111 1111 */
+	DECODE_REJECT	(0xffff, 0x44ff),
+
+	/* ADD (register)		0100 0100 xxxx xxxx */
+	/* CMP (register)		0100 0101 xxxx xxxx */
+	/* MOV (register)		0100 0110 xxxx xxxx */
+	DECODE_CUSTOM	(0xfc00, 0x4400, PROBES_T16_HIREGOPS),
+
+	/*
+	 * Load from Literal Pool
+	 * LDR (literal)		0100 1xxx xxxx xxxx
+	 */
+	DECODE_SIMULATE	(0xf800, 0x4800, PROBES_T16_LDR_LIT),
+
+	/*
+	 * 16-bit Thumb Load/store instructions
+	 *				0101 xxxx xxxx xxxx
+	 *				011x xxxx xxxx xxxx
+	 *				100x xxxx xxxx xxxx
+	 */
+
+	/* STR (register)		0101 000x xxxx xxxx */
+	/* STRH (register)		0101 001x xxxx xxxx */
+	/* STRB (register)		0101 010x xxxx xxxx */
+	/* LDRSB (register)		0101 011x xxxx xxxx */
+	/* LDR (register)		0101 100x xxxx xxxx */
+	/* LDRH (register)		0101 101x xxxx xxxx */
+	/* LDRB (register)		0101 110x xxxx xxxx */
+	/* LDRSH (register)		0101 111x xxxx xxxx */
+	/* STR (immediate, Thumb)	0110 0xxx xxxx xxxx */
+	/* LDR (immediate, Thumb)	0110 1xxx xxxx xxxx */
+	/* STRB (immediate, Thumb)	0111 0xxx xxxx xxxx */
+	/* LDRB (immediate, Thumb)	0111 1xxx xxxx xxxx */
+	DECODE_EMULATE	(0xc000, 0x4000, PROBES_T16_LDRHSTRH),
+	/* STRH (immediate, Thumb)	1000 0xxx xxxx xxxx */
+	/* LDRH (immediate, Thumb)	1000 1xxx xxxx xxxx */
+	DECODE_EMULATE	(0xf000, 0x8000, PROBES_T16_LDRHSTRH),
+	/* STR (immediate, Thumb)	1001 0xxx xxxx xxxx */
+	/* LDR (immediate, Thumb)	1001 1xxx xxxx xxxx */
+	DECODE_SIMULATE	(0xf000, 0x9000, PROBES_T16_LDRSTR),
+
+	/*
+	 * Generate PC-/SP-relative address
+	 * ADR (literal)		1010 0xxx xxxx xxxx
+	 * ADD (SP plus immediate)	1010 1xxx xxxx xxxx
+	 */
+	DECODE_SIMULATE	(0xf000, 0xa000, PROBES_T16_ADR),
+
+	/*
+	 * Miscellaneous 16-bit instructions
+	 *				1011 xxxx xxxx xxxx
+	 */
+	DECODE_TABLE	(0xf000, 0xb000, t16_table_1011),
+
+	/* STM				1100 0xxx xxxx xxxx */
+	/* LDM				1100 1xxx xxxx xxxx */
+	DECODE_EMULATE	(0xf000, 0xc000, PROBES_T16_LDMSTM),
+
+	/*
+	 * Conditional branch, and Supervisor Call
+	 */
+
+	/* Permanently UNDEFINED	1101 1110 xxxx xxxx */
+	/* SVC				1101 1111 xxxx xxxx */
+	DECODE_REJECT	(0xfe00, 0xde00),
+
+	/* Conditional branch		1101 xxxx xxxx xxxx */
+	DECODE_CUSTOM	(0xf000, 0xd000, PROBES_T16_BRANCH_COND),
+
+	/*
+	 * Unconditional branch
+	 * B				1110 0xxx xxxx xxxx
+	 */
+	DECODE_SIMULATE	(0xf800, 0xe000, PROBES_T16_BRANCH),
+
+	DECODE_END
+};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(probes_decode_thumb16_table);
+#endif
+
+static unsigned long __kprobes thumb_check_cc(unsigned long cpsr)
+{
+	if (unlikely(in_it_block(cpsr)))
+		return probes_condition_checks[current_cond(cpsr)](cpsr);
+	return true;
+}
+
+static void __kprobes thumb16_singlestep(probes_opcode_t opcode,
+		struct arch_probes_insn *asi,
+		struct pt_regs *regs)
+{
+	regs->ARM_pc += 2;
+	asi->insn_handler(opcode, asi, regs);
+	regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
+}
+
+static void __kprobes thumb32_singlestep(probes_opcode_t opcode,
+		struct arch_probes_insn *asi,
+		struct pt_regs *regs)
+{
+	regs->ARM_pc += 4;
+	asi->insn_handler(opcode, asi, regs);
+	regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
+}
+
+enum probes_insn __kprobes
+thumb16_probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi,
+			   bool emulate, const union decode_action *actions)
+{
+	asi->insn_singlestep = thumb16_singlestep;
+	asi->insn_check_cc = thumb_check_cc;
+	return probes_decode_insn(insn, asi, probes_decode_thumb16_table, true,
+				  emulate, actions);
+}
+
+enum probes_insn __kprobes
+thumb32_probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi,
+			   bool emulate, const union decode_action *actions)
+{
+	asi->insn_singlestep = thumb32_singlestep;
+	asi->insn_check_cc = thumb_check_cc;
+	return probes_decode_insn(insn, asi, probes_decode_thumb32_table, true,
+				  emulate, actions);
+}
diff --git a/arch/arm/kernel/probes-thumb.h b/arch/arm/kernel/probes-thumb.h
new file mode 100644
index 000000000000..7c6f6ebe514f
--- /dev/null
+++ b/arch/arm/kernel/probes-thumb.h
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/kernel/probes-thumb.h
+ *
+ * Copyright 2013 Linaro Ltd.
+ * Written by: David A. Long
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef _ARM_KERNEL_PROBES_THUMB_H
+#define  _ARM_KERNEL_PROBES_THUMB_H
+
+/*
+ * True if current instruction is in an IT block.
+ */
+#define in_it_block(cpsr)	((cpsr & 0x06000c00) != 0x00000000)
+
+/*
+ * Return the condition code to check for the currently executing instruction.
+ * This is in ITSTATE<7:4> which is in CPSR<15:12> but is only valid if
+ * in_it_block returns true.
+ */
+#define current_cond(cpsr)	((cpsr >> 12) & 0xf)
+
+enum probes_t32_action {
+	PROBES_T32_EMULATE_NONE,
+	PROBES_T32_SIMULATE_NOP,
+	PROBES_T32_LDMSTM,
+	PROBES_T32_LDRDSTRD,
+	PROBES_T32_TABLE_BRANCH,
+	PROBES_T32_TST,
+	PROBES_T32_CMP,
+	PROBES_T32_MOV,
+	PROBES_T32_ADDSUB,
+	PROBES_T32_LOGICAL,
+	PROBES_T32_ADDWSUBW_PC,
+	PROBES_T32_ADDWSUBW,
+	PROBES_T32_MOVW,
+	PROBES_T32_SAT,
+	PROBES_T32_BITFIELD,
+	PROBES_T32_SEV,
+	PROBES_T32_WFE,
+	PROBES_T32_MRS,
+	PROBES_T32_BRANCH_COND,
+	PROBES_T32_BRANCH,
+	PROBES_T32_PLDI,
+	PROBES_T32_LDR_LIT,
+	PROBES_T32_LDRSTR,
+	PROBES_T32_SIGN_EXTEND,
+	PROBES_T32_MEDIA,
+	PROBES_T32_REVERSE,
+	PROBES_T32_MUL_ADD,
+	PROBES_T32_MUL_ADD2,
+	PROBES_T32_MUL_ADD_LONG,
+	NUM_PROBES_T32_ACTIONS
+};
+
+enum probes_t16_action {
+	PROBES_T16_ADD_SP,
+	PROBES_T16_CBZ,
+	PROBES_T16_SIGN_EXTEND,
+	PROBES_T16_PUSH,
+	PROBES_T16_POP,
+	PROBES_T16_SEV,
+	PROBES_T16_WFE,
+	PROBES_T16_IT,
+	PROBES_T16_CMP,
+	PROBES_T16_ADDSUB,
+	PROBES_T16_LOGICAL,
+	PROBES_T16_BLX,
+	PROBES_T16_HIREGOPS,
+	PROBES_T16_LDR_LIT,
+	PROBES_T16_LDRHSTRH,
+	PROBES_T16_LDRSTR,
+	PROBES_T16_ADR,
+	PROBES_T16_LDMSTM,
+	PROBES_T16_BRANCH_COND,
+	PROBES_T16_BRANCH,
+	NUM_PROBES_T16_ACTIONS
+};
+
+extern const union decode_item probes_decode_thumb32_table[];
+extern const union decode_item probes_decode_thumb16_table[];
+
+enum probes_insn __kprobes
+thumb16_probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi,
+		bool emulate, const union decode_action *actions);
+enum probes_insn __kprobes
+thumb32_probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi,
+		bool emulate, const union decode_action *actions);
+
+#endif
diff --git a/arch/arm/kernel/probes.c b/arch/arm/kernel/probes.c
new file mode 100644
index 000000000000..a8ab540d7e73
--- /dev/null
+++ b/arch/arm/kernel/probes.c
@@ -0,0 +1,456 @@
+/*
+ * arch/arm/kernel/probes.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * Some contents moved here from arch/arm/include/asm/kprobes-arm.c which is
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/system_info.h>
+#include <asm/ptrace.h>
+#include <linux/bug.h>
+
+#include "probes.h"
+
+
+#ifndef find_str_pc_offset
+
+/*
+ * For STR and STM instructions, an ARM core may choose to use either
+ * a +8 or a +12 displacement from the current instruction's address.
+ * Whichever value is chosen for a given core, it must be the same for
+ * both instructions and may not change.  This function measures it.
+ */
+
+int str_pc_offset;
+
+void __init find_str_pc_offset(void)
+{
+	int addr, scratch, ret;
+
+	__asm__ (
+		"sub	%[ret], pc, #4		\n\t"
+		"str	pc, %[addr]		\n\t"
+		"ldr	%[scr], %[addr]		\n\t"
+		"sub	%[ret], %[scr], %[ret]	\n\t"
+		: [ret] "=r" (ret), [scr] "=r" (scratch), [addr] "+m" (addr));
+
+	str_pc_offset = ret;
+}
+
+#endif /* !find_str_pc_offset */
+
+
+#ifndef test_load_write_pc_interworking
+
+bool load_write_pc_interworks;
+
+void __init test_load_write_pc_interworking(void)
+{
+	int arch = cpu_architecture();
+	BUG_ON(arch == CPU_ARCH_UNKNOWN);
+	load_write_pc_interworks = arch >= CPU_ARCH_ARMv5T;
+}
+
+#endif /* !test_load_write_pc_interworking */
+
+
+#ifndef test_alu_write_pc_interworking
+
+bool alu_write_pc_interworks;
+
+void __init test_alu_write_pc_interworking(void)
+{
+	int arch = cpu_architecture();
+	BUG_ON(arch == CPU_ARCH_UNKNOWN);
+	alu_write_pc_interworks = arch >= CPU_ARCH_ARMv7;
+}
+
+#endif /* !test_alu_write_pc_interworking */
+
+
+void __init arm_probes_decode_init(void)
+{
+	find_str_pc_offset();
+	test_load_write_pc_interworking();
+	test_alu_write_pc_interworking();
+}
+
+
+static unsigned long __kprobes __check_eq(unsigned long cpsr)
+{
+	return cpsr & PSR_Z_BIT;
+}
+
+static unsigned long __kprobes __check_ne(unsigned long cpsr)
+{
+	return (~cpsr) & PSR_Z_BIT;
+}
+
+static unsigned long __kprobes __check_cs(unsigned long cpsr)
+{
+	return cpsr & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_cc(unsigned long cpsr)
+{
+	return (~cpsr) & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_mi(unsigned long cpsr)
+{
+	return cpsr & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_pl(unsigned long cpsr)
+{
+	return (~cpsr) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_vs(unsigned long cpsr)
+{
+	return cpsr & PSR_V_BIT;
+}
+
+static unsigned long __kprobes __check_vc(unsigned long cpsr)
+{
+	return (~cpsr) & PSR_V_BIT;
+}
+
+static unsigned long __kprobes __check_hi(unsigned long cpsr)
+{
+	cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+	return cpsr & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_ls(unsigned long cpsr)
+{
+	cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+	return (~cpsr) & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_ge(unsigned long cpsr)
+{
+	cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+	return (~cpsr) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_lt(unsigned long cpsr)
+{
+	cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+	return cpsr & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_gt(unsigned long cpsr)
+{
+	unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+	temp |= (cpsr << 1);			 /* PSR_N_BIT |= PSR_Z_BIT */
+	return (~temp) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_le(unsigned long cpsr)
+{
+	unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+	temp |= (cpsr << 1);			 /* PSR_N_BIT |= PSR_Z_BIT */
+	return temp & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_al(unsigned long cpsr)
+{
+	return true;
+}
+
+probes_check_cc * const probes_condition_checks[16] = {
+	&__check_eq, &__check_ne, &__check_cs, &__check_cc,
+	&__check_mi, &__check_pl, &__check_vs, &__check_vc,
+	&__check_hi, &__check_ls, &__check_ge, &__check_lt,
+	&__check_gt, &__check_le, &__check_al, &__check_al
+};
+
+
+void __kprobes probes_simulate_nop(probes_opcode_t opcode,
+	struct arch_probes_insn *asi,
+	struct pt_regs *regs)
+{
+}
+
+void __kprobes probes_emulate_none(probes_opcode_t opcode,
+	struct arch_probes_insn *asi,
+	struct pt_regs *regs)
+{
+	asi->insn_fn();
+}
+
+/*
+ * Prepare an instruction slot to receive an instruction for emulating.
+ * This is done by placing a subroutine return after the location where the
+ * instruction will be placed. We also modify ARM instructions to be
+ * unconditional as the condition code will already be checked before any
+ * emulation handler is called.
+ */
+static probes_opcode_t __kprobes
+prepare_emulated_insn(probes_opcode_t insn, struct arch_probes_insn *asi,
+		      bool thumb)
+{
+#ifdef CONFIG_THUMB2_KERNEL
+	if (thumb) {
+		u16 *thumb_insn = (u16 *)asi->insn;
+		/* Thumb bx lr */
+		thumb_insn[1] = __opcode_to_mem_thumb16(0x4770);
+		thumb_insn[2] = __opcode_to_mem_thumb16(0x4770);
+		return insn;
+	}
+	asi->insn[1] = __opcode_to_mem_arm(0xe12fff1e); /* ARM bx lr */
+#else
+	asi->insn[1] = __opcode_to_mem_arm(0xe1a0f00e); /* mov pc, lr */
+#endif
+	/* Make an ARM instruction unconditional */
+	if (insn < 0xe0000000)
+		insn = (insn | 0xe0000000) & ~0x10000000;
+	return insn;
+}
+
+/*
+ * Write a (probably modified) instruction into the slot previously prepared by
+ * prepare_emulated_insn
+ */
+static void  __kprobes
+set_emulated_insn(probes_opcode_t insn, struct arch_probes_insn *asi,
+		  bool thumb)
+{
+#ifdef CONFIG_THUMB2_KERNEL
+	if (thumb) {
+		u16 *ip = (u16 *)asi->insn;
+		if (is_wide_instruction(insn))
+			*ip++ = __opcode_to_mem_thumb16(insn >> 16);
+		*ip++ = __opcode_to_mem_thumb16(insn);
+		return;
+	}
+#endif
+	asi->insn[0] = __opcode_to_mem_arm(insn);
+}
+
+/*
+ * When we modify the register numbers encoded in an instruction to be emulated,
+ * the new values come from this define. For ARM and 32-bit Thumb instructions
+ * this gives...
+ *
+ *	bit position	  16  12   8   4   0
+ *	---------------+---+---+---+---+---+
+ *	register	 r2  r0  r1  --  r3
+ */
+#define INSN_NEW_BITS		0x00020103
+
+/* Each nibble has same value as that at INSN_NEW_BITS bit 16 */
+#define INSN_SAMEAS16_BITS	0x22222222
+
+/*
+ * Validate and modify each of the registers encoded in an instruction.
+ *
+ * Each nibble in regs contains a value from enum decode_reg_type. For each
+ * non-zero value, the corresponding nibble in pinsn is validated and modified
+ * according to the type.
+ */
+static bool __kprobes decode_regs(probes_opcode_t *pinsn, u32 regs, bool modify)
+{
+	probes_opcode_t insn = *pinsn;
+	probes_opcode_t mask = 0xf; /* Start at least significant nibble */
+
+	for (; regs != 0; regs >>= 4, mask <<= 4) {
+
+		probes_opcode_t new_bits = INSN_NEW_BITS;
+
+		switch (regs & 0xf) {
+
+		case REG_TYPE_NONE:
+			/* Nibble not a register, skip to next */
+			continue;
+
+		case REG_TYPE_ANY:
+			/* Any register is allowed */
+			break;
+
+		case REG_TYPE_SAMEAS16:
+			/* Replace register with same as at bit position 16 */
+			new_bits = INSN_SAMEAS16_BITS;
+			break;
+
+		case REG_TYPE_SP:
+			/* Only allow SP (R13) */
+			if ((insn ^ 0xdddddddd) & mask)
+				goto reject;
+			break;
+
+		case REG_TYPE_PC:
+			/* Only allow PC (R15) */
+			if ((insn ^ 0xffffffff) & mask)
+				goto reject;
+			break;
+
+		case REG_TYPE_NOSP:
+			/* Reject SP (R13) */
+			if (((insn ^ 0xdddddddd) & mask) == 0)
+				goto reject;
+			break;
+
+		case REG_TYPE_NOSPPC:
+		case REG_TYPE_NOSPPCX:
+			/* Reject SP and PC (R13 and R15) */
+			if (((insn ^ 0xdddddddd) & 0xdddddddd & mask) == 0)
+				goto reject;
+			break;
+
+		case REG_TYPE_NOPCWB:
+			if (!is_writeback(insn))
+				break; /* No writeback, so any register is OK */
+			/* fall through... */
+		case REG_TYPE_NOPC:
+		case REG_TYPE_NOPCX:
+			/* Reject PC (R15) */
+			if (((insn ^ 0xffffffff) & mask) == 0)
+				goto reject;
+			break;
+		}
+
+		/* Replace value of nibble with new register number... */
+		insn &= ~mask;
+		insn |= new_bits & mask;
+	}
+
+	if (modify)
+		*pinsn = insn;
+
+	return true;
+
+reject:
+	return false;
+}
+
+static const int decode_struct_sizes[NUM_DECODE_TYPES] = {
+	[DECODE_TYPE_TABLE]	= sizeof(struct decode_table),
+	[DECODE_TYPE_CUSTOM]	= sizeof(struct decode_custom),
+	[DECODE_TYPE_SIMULATE]	= sizeof(struct decode_simulate),
+	[DECODE_TYPE_EMULATE]	= sizeof(struct decode_emulate),
+	[DECODE_TYPE_OR]	= sizeof(struct decode_or),
+	[DECODE_TYPE_REJECT]	= sizeof(struct decode_reject)
+};
+
+/*
+ * probes_decode_insn operates on data tables in order to decode an ARM
+ * architecture instruction onto which a kprobe has been placed.
+ *
+ * These instruction decoding tables are a concatenation of entries each
+ * of which consist of one of the following structs:
+ *
+ *	decode_table
+ *	decode_custom
+ *	decode_simulate
+ *	decode_emulate
+ *	decode_or
+ *	decode_reject
+ *
+ * Each of these starts with a struct decode_header which has the following
+ * fields:
+ *
+ *	type_regs
+ *	mask
+ *	value
+ *
+ * The least significant DECODE_TYPE_BITS of type_regs contains a value
+ * from enum decode_type, this indicates which of the decode_* structs
+ * the entry contains. The value DECODE_TYPE_END indicates the end of the
+ * table.
+ *
+ * When the table is parsed, each entry is checked in turn to see if it
+ * matches the instruction to be decoded using the test:
+ *
+ *	(insn & mask) == value
+ *
+ * If no match is found before the end of the table is reached then decoding
+ * fails with INSN_REJECTED.
+ *
+ * When a match is found, decode_regs() is called to validate and modify each
+ * of the registers encoded in the instruction; the data it uses to do this
+ * is (type_regs >> DECODE_TYPE_BITS). A validation failure will cause decoding
+ * to fail with INSN_REJECTED.
+ *
+ * Once the instruction has passed the above tests, further processing
+ * depends on the type of the table entry's decode struct.
+ *
+ */
+int __kprobes
+probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi,
+		   const union decode_item *table, bool thumb,
+		   bool emulate, const union decode_action *actions)
+{
+	const struct decode_header *h = (struct decode_header *)table;
+	const struct decode_header *next;
+	bool matched = false;
+
+	if (emulate)
+		insn = prepare_emulated_insn(insn, asi, thumb);
+
+	for (;; h = next) {
+		enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+		u32 regs = h->type_regs.bits >> DECODE_TYPE_BITS;
+
+		if (type == DECODE_TYPE_END)
+			return INSN_REJECTED;
+
+		next = (struct decode_header *)
+				((uintptr_t)h + decode_struct_sizes[type]);
+
+		if (!matched && (insn & h->mask.bits) != h->value.bits)
+			continue;
+
+		if (!decode_regs(&insn, regs, emulate))
+			return INSN_REJECTED;
+
+		switch (type) {
+
+		case DECODE_TYPE_TABLE: {
+			struct decode_table *d = (struct decode_table *)h;
+			next = (struct decode_header *)d->table.table;
+			break;
+		}
+
+		case DECODE_TYPE_CUSTOM: {
+			struct decode_custom *d = (struct decode_custom *)h;
+			return actions[d->decoder.action].decoder(insn, asi, h);
+		}
+
+		case DECODE_TYPE_SIMULATE: {
+			struct decode_simulate *d = (struct decode_simulate *)h;
+			asi->insn_handler = actions[d->handler.action].handler;
+			return INSN_GOOD_NO_SLOT;
+		}
+
+		case DECODE_TYPE_EMULATE: {
+			struct decode_emulate *d = (struct decode_emulate *)h;
+
+			if (!emulate)
+				return actions[d->handler.action].decoder(insn,
+					asi, h);
+
+			asi->insn_handler = actions[d->handler.action].handler;
+			set_emulated_insn(insn, asi, thumb);
+			return INSN_GOOD;
+		}
+
+		case DECODE_TYPE_OR:
+			matched = true;
+			break;
+
+		case DECODE_TYPE_REJECT:
+		default:
+			return INSN_REJECTED;
+		}
+	}
+}
diff --git a/arch/arm/kernel/probes.h b/arch/arm/kernel/probes.h
new file mode 100644
index 000000000000..dba9f2466a93
--- /dev/null
+++ b/arch/arm/kernel/probes.h
@@ -0,0 +1,407 @@
+/*
+ * arch/arm/kernel/probes.h
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * Some contents moved here from arch/arm/include/asm/kprobes.h which is
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _ARM_KERNEL_PROBES_H
+#define  _ARM_KERNEL_PROBES_H
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <asm/probes.h>
+
+void __init arm_probes_decode_init(void);
+
+extern probes_check_cc * const probes_condition_checks[16];
+
+#if __LINUX_ARM_ARCH__ >= 7
+
+/* str_pc_offset is architecturally defined from ARMv7 onwards */
+#define str_pc_offset 8
+#define find_str_pc_offset()
+
+#else /* __LINUX_ARM_ARCH__ < 7 */
+
+/* We need a run-time check to determine str_pc_offset */
+extern int str_pc_offset;
+void __init find_str_pc_offset(void);
+
+#endif
+
+
+/*
+ * Update ITSTATE after normal execution of an IT block instruction.
+ *
+ * The 8 IT state bits are split into two parts in CPSR:
+ *	ITSTATE<1:0> are in CPSR<26:25>
+ *	ITSTATE<7:2> are in CPSR<15:10>
+ */
+static inline unsigned long it_advance(unsigned long cpsr)
+	{
+	if ((cpsr & 0x06000400) == 0) {
+		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
+		cpsr &= ~PSR_IT_MASK;
+	} else {
+		/* We need to shift left ITSTATE<4:0> */
+		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
+		unsigned long it = cpsr & mask;
+		it <<= 1;
+		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
+		it &= mask;
+		cpsr &= ~mask;
+		cpsr |= it;
+	}
+	return cpsr;
+}
+
+static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
+{
+	long cpsr = regs->ARM_cpsr;
+	if (pcv & 0x1) {
+		cpsr |= PSR_T_BIT;
+		pcv &= ~0x1;
+	} else {
+		cpsr &= ~PSR_T_BIT;
+		pcv &= ~0x2;	/* Avoid UNPREDICTABLE address allignment */
+	}
+	regs->ARM_cpsr = cpsr;
+	regs->ARM_pc = pcv;
+}
+
+
+#if __LINUX_ARM_ARCH__ >= 6
+
+/* Kernels built for >= ARMv6 should never run on <= ARMv5 hardware, so... */
+#define load_write_pc_interworks true
+#define test_load_write_pc_interworking()
+
+#else /* __LINUX_ARM_ARCH__ < 6 */
+
+/* We need run-time testing to determine if load_write_pc() should interwork. */
+extern bool load_write_pc_interworks;
+void __init test_load_write_pc_interworking(void);
+
+#endif
+
+static inline void __kprobes load_write_pc(long pcv, struct pt_regs *regs)
+{
+	if (load_write_pc_interworks)
+		bx_write_pc(pcv, regs);
+	else
+		regs->ARM_pc = pcv;
+}
+
+
+#if __LINUX_ARM_ARCH__ >= 7
+
+#define alu_write_pc_interworks true
+#define test_alu_write_pc_interworking()
+
+#elif __LINUX_ARM_ARCH__ <= 5
+
+/* Kernels built for <= ARMv5 should never run on >= ARMv6 hardware, so... */
+#define alu_write_pc_interworks false
+#define test_alu_write_pc_interworking()
+
+#else /* __LINUX_ARM_ARCH__ == 6 */
+
+/* We could be an ARMv6 binary on ARMv7 hardware so we need a run-time check. */
+extern bool alu_write_pc_interworks;
+void __init test_alu_write_pc_interworking(void);
+
+#endif /* __LINUX_ARM_ARCH__ == 6 */
+
+static inline void __kprobes alu_write_pc(long pcv, struct pt_regs *regs)
+{
+	if (alu_write_pc_interworks)
+		bx_write_pc(pcv, regs);
+	else
+		regs->ARM_pc = pcv;
+}
+
+
+/*
+ * Test if load/store instructions writeback the address register.
+ * if P (bit 24) == 0 or W (bit 21) == 1
+ */
+#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000)
+
+/*
+ * The following definitions and macros are used to build instruction
+ * decoding tables for use by probes_decode_insn.
+ *
+ * These tables are a concatenation of entries each of which consist of one of
+ * the decode_* structs. All of the fields in every type of decode structure
+ * are of the union type decode_item, therefore the entire decode table can be
+ * viewed as an array of these and declared like:
+ *
+ *	static const union decode_item table_name[] = {};
+ *
+ * In order to construct each entry in the table, macros are used to
+ * initialise a number of sequential decode_item values in a layout which
+ * matches the relevant struct. E.g. DECODE_SIMULATE initialise a struct
+ * decode_simulate by initialising four decode_item objects like this...
+ *
+ *	{.bits = _type},
+ *	{.bits = _mask},
+ *	{.bits = _value},
+ *	{.action = _handler},
+ *
+ * Initialising a specified member of the union means that the compiler
+ * will produce a warning if the argument is of an incorrect type.
+ *
+ * Below is a list of each of the macros used to initialise entries and a
+ * description of the action performed when that entry is matched to an
+ * instruction. A match is found when (instruction & mask) == value.
+ *
+ * DECODE_TABLE(mask, value, table)
+ *	Instruction decoding jumps to parsing the new sub-table 'table'.
+ *
+ * DECODE_CUSTOM(mask, value, decoder)
+ *	The value of 'decoder' is used as an index into the array of
+ *	action functions, and the retrieved decoder function is invoked
+ *	to complete decoding of the instruction.
+ *
+ * DECODE_SIMULATE(mask, value, handler)
+ *	The probes instruction handler is set to the value found by
+ *	indexing into the action array using the value of 'handler'. This
+ *	will be used to simulate the instruction when the probe is hit.
+ *	Decoding returns with INSN_GOOD_NO_SLOT.
+ *
+ * DECODE_EMULATE(mask, value, handler)
+ *	The probes instruction handler is set to the value found by
+ *	indexing into the action array using the value of 'handler'. This
+ *	will be used to emulate the instruction when the probe is hit. The
+ *	modified instruction (see below) is placed in the probes instruction
+ *	slot so it may be called by the emulation code. Decoding returns
+ *	with INSN_GOOD.
+ *
+ * DECODE_REJECT(mask, value)
+ *	Instruction decoding fails with INSN_REJECTED
+ *
+ * DECODE_OR(mask, value)
+ *	This allows the mask/value test of multiple table entries to be
+ *	logically ORed. Once an 'or' entry is matched the decoding action to
+ *	be performed is that of the next entry which isn't an 'or'. E.g.
+ *
+ *		DECODE_OR	(mask1, value1)
+ *		DECODE_OR	(mask2, value2)
+ *		DECODE_SIMULATE	(mask3, value3, simulation_handler)
+ *
+ *	This means that if any of the three mask/value pairs match the
+ *	instruction being decoded, then 'simulation_handler' will be used
+ *	for it.
+ *
+ * Both the SIMULATE and EMULATE macros have a second form which take an
+ * additional 'regs' argument.
+ *
+ *	DECODE_SIMULATEX(mask, value, handler, regs)
+ *	DECODE_EMULATEX	(mask, value, handler, regs)
+ *
+ * These are used to specify what kind of CPU register is encoded in each of the
+ * least significant 5 nibbles of the instruction being decoded. The regs value
+ * is specified using the REGS macro, this takes any of the REG_TYPE_* values
+ * from enum decode_reg_type as arguments; only the '*' part of the name is
+ * given. E.g.
+ *
+ *	REGS(0, ANY, NOPC, 0, ANY)
+ *
+ * This indicates an instruction is encoded like:
+ *
+ *	bits 19..16	ignore
+ *	bits 15..12	any register allowed here
+ *	bits 11.. 8	any register except PC allowed here
+ *	bits  7.. 4	ignore
+ *	bits  3.. 0	any register allowed here
+ *
+ * This register specification is checked after a decode table entry is found to
+ * match an instruction (through the mask/value test). Any invalid register then
+ * found in the instruction will cause decoding to fail with INSN_REJECTED. In
+ * the above example this would happen if bits 11..8 of the instruction were
+ * 1111, indicating R15 or PC.
+ *
+ * As well as checking for legal combinations of registers, this data is also
+ * used to modify the registers encoded in the instructions so that an
+ * emulation routines can use it. (See decode_regs() and INSN_NEW_BITS.)
+ *
+ * Here is a real example which matches ARM instructions of the form
+ * "AND <Rd>,<Rn>,<Rm>,<shift> <Rs>"
+ *
+ *	DECODE_EMULATEX	(0x0e000090, 0x00000010, PROBES_DATA_PROCESSING_REG,
+ *						 REGS(ANY, ANY, NOPC, 0, ANY)),
+ *						      ^    ^    ^        ^
+ *						      Rn   Rd   Rs       Rm
+ *
+ * Decoding the instruction "AND R4, R5, R6, ASL R15" will be rejected because
+ * Rs == R15
+ *
+ * Decoding the instruction "AND R4, R5, R6, ASL R7" will be accepted and the
+ * instruction will be modified to "AND R0, R2, R3, ASL R1" and then placed into
+ * the kprobes instruction slot. This can then be called later by the handler
+ * function emulate_rd12rn16rm0rs8_rwflags (a pointer to which is retrieved from
+ * the indicated slot in the action array), in order to simulate the instruction.
+ */
+
+enum decode_type {
+	DECODE_TYPE_END,
+	DECODE_TYPE_TABLE,
+	DECODE_TYPE_CUSTOM,
+	DECODE_TYPE_SIMULATE,
+	DECODE_TYPE_EMULATE,
+	DECODE_TYPE_OR,
+	DECODE_TYPE_REJECT,
+	NUM_DECODE_TYPES /* Must be last enum */
+};
+
+#define DECODE_TYPE_BITS	4
+#define DECODE_TYPE_MASK	((1 << DECODE_TYPE_BITS) - 1)
+
+enum decode_reg_type {
+	REG_TYPE_NONE = 0, /* Not a register, ignore */
+	REG_TYPE_ANY,	   /* Any register allowed */
+	REG_TYPE_SAMEAS16, /* Register should be same as that at bits 19..16 */
+	REG_TYPE_SP,	   /* Register must be SP */
+	REG_TYPE_PC,	   /* Register must be PC */
+	REG_TYPE_NOSP,	   /* Register must not be SP */
+	REG_TYPE_NOSPPC,   /* Register must not be SP or PC */
+	REG_TYPE_NOPC,	   /* Register must not be PC */
+	REG_TYPE_NOPCWB,   /* No PC if load/store write-back flag also set */
+
+	/* The following types are used when the encoding for PC indicates
+	 * another instruction form. This distiction only matters for test
+	 * case coverage checks.
+	 */
+	REG_TYPE_NOPCX,	   /* Register must not be PC */
+	REG_TYPE_NOSPPCX,  /* Register must not be SP or PC */
+
+	/* Alias to allow '0' arg to be used in REGS macro. */
+	REG_TYPE_0 = REG_TYPE_NONE
+};
+
+#define REGS(r16, r12, r8, r4, r0)	\
+	(((REG_TYPE_##r16) << 16) +	\
+	((REG_TYPE_##r12) << 12) +	\
+	((REG_TYPE_##r8) << 8) +	\
+	((REG_TYPE_##r4) << 4) +	\
+	(REG_TYPE_##r0))
+
+union decode_item {
+	u32			bits;
+	const union decode_item	*table;
+	int			action;
+};
+
+struct decode_header;
+typedef enum probes_insn (probes_custom_decode_t)(probes_opcode_t,
+						  struct arch_probes_insn *,
+						  const struct decode_header *);
+
+union decode_action {
+	probes_insn_handler_t	*handler;
+	probes_custom_decode_t	*decoder;
+};
+
+#define DECODE_END			\
+	{.bits = DECODE_TYPE_END}
+
+
+struct decode_header {
+	union decode_item	type_regs;
+	union decode_item	mask;
+	union decode_item	value;
+};
+
+#define DECODE_HEADER(_type, _mask, _value, _regs)		\
+	{.bits = (_type) | ((_regs) << DECODE_TYPE_BITS)},	\
+	{.bits = (_mask)},					\
+	{.bits = (_value)}
+
+
+struct decode_table {
+	struct decode_header	header;
+	union decode_item	table;
+};
+
+#define DECODE_TABLE(_mask, _value, _table)			\
+	DECODE_HEADER(DECODE_TYPE_TABLE, _mask, _value, 0),	\
+	{.table = (_table)}
+
+
+struct decode_custom {
+	struct decode_header	header;
+	union decode_item	decoder;
+};
+
+#define DECODE_CUSTOM(_mask, _value, _decoder)			\
+	DECODE_HEADER(DECODE_TYPE_CUSTOM, _mask, _value, 0),	\
+	{.action = (_decoder)}
+
+
+struct decode_simulate {
+	struct decode_header	header;
+	union decode_item	handler;
+};
+
+#define DECODE_SIMULATEX(_mask, _value, _handler, _regs)		\
+	DECODE_HEADER(DECODE_TYPE_SIMULATE, _mask, _value, _regs),	\
+	{.action = (_handler)}
+
+#define DECODE_SIMULATE(_mask, _value, _handler)	\
+	DECODE_SIMULATEX(_mask, _value, _handler, 0)
+
+
+struct decode_emulate {
+	struct decode_header	header;
+	union decode_item	handler;
+};
+
+#define DECODE_EMULATEX(_mask, _value, _handler, _regs)			\
+	DECODE_HEADER(DECODE_TYPE_EMULATE, _mask, _value, _regs),	\
+	{.action = (_handler)}
+
+#define DECODE_EMULATE(_mask, _value, _handler)		\
+	DECODE_EMULATEX(_mask, _value, _handler, 0)
+
+
+struct decode_or {
+	struct decode_header	header;
+};
+
+#define DECODE_OR(_mask, _value)				\
+	DECODE_HEADER(DECODE_TYPE_OR, _mask, _value, 0)
+
+enum probes_insn {
+	INSN_REJECTED,
+	INSN_GOOD,
+	INSN_GOOD_NO_SLOT
+};
+
+struct decode_reject {
+	struct decode_header	header;
+};
+
+#define DECODE_REJECT(_mask, _value)				\
+	DECODE_HEADER(DECODE_TYPE_REJECT, _mask, _value, 0)
+
+probes_insn_handler_t probes_simulate_nop;
+probes_insn_handler_t probes_emulate_none;
+
+int __kprobes
+probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi,
+		const union decode_item *table, bool thumb, bool emulate,
+		const union decode_action *actions);
+
+#endif
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 92f7b15dd221..81ef686a91ca 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -30,7 +30,6 @@
 #include <linux/uaccess.h>
 #include <linux/random.h>
 #include <linux/hw_breakpoint.h>
-#include <linux/cpuidle.h>
 #include <linux/leds.h>
 #include <linux/reboot.h>
 
@@ -39,6 +38,7 @@
 #include <asm/processor.h>
 #include <asm/thread_notify.h>
 #include <asm/stacktrace.h>
+#include <asm/system_misc.h>
 #include <asm/mach/time.h>
 #include <asm/tls.h>
 
@@ -48,14 +48,14 @@ unsigned long __stack_chk_guard __read_mostly;
 EXPORT_SYMBOL(__stack_chk_guard);
 #endif
 
-static const char *processor_modes[] = {
+static const char *processor_modes[] __maybe_unused = {
   "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
   "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
   "USER_32", "FIQ_32" , "IRQ_32" , "SVC_32" , "UK4_32" , "UK5_32" , "UK6_32" , "ABT_32" ,
   "UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32"
 };
 
-static const char *isa_modes[] = {
+static const char *isa_modes[] __maybe_unused = {
   "ARM" , "Thumb" , "Jazelle", "ThumbEE"
 };
 
@@ -100,7 +100,7 @@ void soft_restart(unsigned long addr)
 	u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack);
 
 	/* Disable interrupts first */
-	local_irq_disable();
+	raw_local_irq_disable();
 	local_fiq_disable();
 
 	/* Disable the L2 if we're the last man standing. */
@@ -133,7 +133,11 @@ EXPORT_SYMBOL_GPL(arm_pm_restart);
 
 void (*arm_pm_idle)(void);
 
-static void default_idle(void)
+/*
+ * Called from the core idle loop.
+ */
+
+void arch_cpu_idle(void)
 {
 	if (arm_pm_idle)
 		arm_pm_idle();
@@ -168,15 +172,6 @@ void arch_cpu_idle_dead(void)
 #endif
 
 /*
- * Called from the core idle loop.
- */
-void arch_cpu_idle(void)
-{
-	if (cpuidle_idle_call())
-		default_idle();
-}
-
-/*
  * Called by kexec, immediately prior to machine_kexec().
  *
  * This must completely disable all secondary CPUs; simply causing those CPUs
@@ -276,12 +271,17 @@ void __show_regs(struct pt_regs *regs)
 	buf[3] = flags & PSR_V_BIT ? 'V' : 'v';
 	buf[4] = '\0';
 
+#ifndef CONFIG_CPU_V7M
 	printk("Flags: %s  IRQs o%s  FIQs o%s  Mode %s  ISA %s  Segment %s\n",
 		buf, interrupts_enabled(regs) ? "n" : "ff",
 		fast_interrupts_enabled(regs) ? "n" : "ff",
 		processor_modes[processor_mode(regs)],
 		isa_modes[isa_mode(regs)],
 		get_fs() == get_ds() ? "kernel" : "user");
+#else
+	printk("xPSR: %08lx\n", regs->ARM_cpsr);
+#endif
+
 #ifdef CONFIG_CPU_CP15
 	{
 		unsigned int ctrl;
diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c
index 46931880093d..f73891b6b730 100644
--- a/arch/arm/kernel/psci.c
+++ b/arch/arm/kernel/psci.c
@@ -17,63 +17,58 @@
 
 #include <linux/init.h>
 #include <linux/of.h>
+#include <linux/reboot.h>
+#include <linux/pm.h>
+#include <uapi/linux/psci.h>
 
 #include <asm/compiler.h>
 #include <asm/errno.h>
 #include <asm/opcodes-sec.h>
 #include <asm/opcodes-virt.h>
 #include <asm/psci.h>
+#include <asm/system_misc.h>
 
 struct psci_operations psci_ops;
 
 static int (*invoke_psci_fn)(u32, u32, u32, u32);
+typedef int (*psci_initcall_t)(const struct device_node *);
 
 enum psci_function {
 	PSCI_FN_CPU_SUSPEND,
 	PSCI_FN_CPU_ON,
 	PSCI_FN_CPU_OFF,
 	PSCI_FN_MIGRATE,
+	PSCI_FN_AFFINITY_INFO,
+	PSCI_FN_MIGRATE_INFO_TYPE,
 	PSCI_FN_MAX,
 };
 
 static u32 psci_function_id[PSCI_FN_MAX];
 
-#define PSCI_RET_SUCCESS		0
-#define PSCI_RET_EOPNOTSUPP		-1
-#define PSCI_RET_EINVAL			-2
-#define PSCI_RET_EPERM			-3
-
 static int psci_to_linux_errno(int errno)
 {
 	switch (errno) {
 	case PSCI_RET_SUCCESS:
 		return 0;
-	case PSCI_RET_EOPNOTSUPP:
+	case PSCI_RET_NOT_SUPPORTED:
 		return -EOPNOTSUPP;
-	case PSCI_RET_EINVAL:
+	case PSCI_RET_INVALID_PARAMS:
 		return -EINVAL;
-	case PSCI_RET_EPERM:
+	case PSCI_RET_DENIED:
 		return -EPERM;
 	};
 
 	return -EINVAL;
 }
 
-#define PSCI_POWER_STATE_ID_MASK	0xffff
-#define PSCI_POWER_STATE_ID_SHIFT	0
-#define PSCI_POWER_STATE_TYPE_MASK	0x1
-#define PSCI_POWER_STATE_TYPE_SHIFT	16
-#define PSCI_POWER_STATE_AFFL_MASK	0x3
-#define PSCI_POWER_STATE_AFFL_SHIFT	24
-
 static u32 psci_power_state_pack(struct psci_power_state state)
 {
-	return	((state.id & PSCI_POWER_STATE_ID_MASK)
-			<< PSCI_POWER_STATE_ID_SHIFT)	|
-		((state.type & PSCI_POWER_STATE_TYPE_MASK)
-			<< PSCI_POWER_STATE_TYPE_SHIFT)	|
-		((state.affinity_level & PSCI_POWER_STATE_AFFL_MASK)
-			<< PSCI_POWER_STATE_AFFL_SHIFT);
+	return ((state.id << PSCI_0_2_POWER_STATE_ID_SHIFT)
+			& PSCI_0_2_POWER_STATE_ID_MASK) |
+		((state.type << PSCI_0_2_POWER_STATE_TYPE_SHIFT)
+		 & PSCI_0_2_POWER_STATE_TYPE_MASK) |
+		((state.affinity_level << PSCI_0_2_POWER_STATE_AFFL_SHIFT)
+		 & PSCI_0_2_POWER_STATE_AFFL_MASK);
 }
 
 /*
@@ -110,6 +105,14 @@ static noinline int __invoke_psci_fn_smc(u32 function_id, u32 arg0, u32 arg1,
 	return function_id;
 }
 
+static int psci_get_version(void)
+{
+	int err;
+
+	err = invoke_psci_fn(PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0);
+	return err;
+}
+
 static int psci_cpu_suspend(struct psci_power_state state,
 			    unsigned long entry_point)
 {
@@ -153,26 +156,36 @@ static int psci_migrate(unsigned long cpuid)
 	return psci_to_linux_errno(err);
 }
 
-static const struct of_device_id psci_of_match[] __initconst = {
-	{ .compatible = "arm,psci",	},
-	{},
-};
+static int psci_affinity_info(unsigned long target_affinity,
+		unsigned long lowest_affinity_level)
+{
+	int err;
+	u32 fn;
+
+	fn = psci_function_id[PSCI_FN_AFFINITY_INFO];
+	err = invoke_psci_fn(fn, target_affinity, lowest_affinity_level, 0);
+	return err;
+}
 
-void __init psci_init(void)
+static int psci_migrate_info_type(void)
 {
-	struct device_node *np;
-	const char *method;
-	u32 id;
+	int err;
+	u32 fn;
 
-	np = of_find_matching_node(NULL, psci_of_match);
-	if (!np)
-		return;
+	fn = psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE];
+	err = invoke_psci_fn(fn, 0, 0, 0);
+	return err;
+}
+
+static int get_set_conduit_method(struct device_node *np)
+{
+	const char *method;
 
-	pr_info("probing function IDs from device-tree\n");
+	pr_info("probing for conduit method from DT.\n");
 
 	if (of_property_read_string(np, "method", &method)) {
-		pr_warning("missing \"method\" property\n");
-		goto out_put_node;
+		pr_warn("missing \"method\" property\n");
+		return -ENXIO;
 	}
 
 	if (!strcmp("hvc", method)) {
@@ -180,10 +193,99 @@ void __init psci_init(void)
 	} else if (!strcmp("smc", method)) {
 		invoke_psci_fn = __invoke_psci_fn_smc;
 	} else {
-		pr_warning("invalid \"method\" property: %s\n", method);
+		pr_warn("invalid \"method\" property: %s\n", method);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void psci_sys_reset(enum reboot_mode reboot_mode, const char *cmd)
+{
+	invoke_psci_fn(PSCI_0_2_FN_SYSTEM_RESET, 0, 0, 0);
+}
+
+static void psci_sys_poweroff(void)
+{
+	invoke_psci_fn(PSCI_0_2_FN_SYSTEM_OFF, 0, 0, 0);
+}
+
+/*
+ * PSCI Function IDs for v0.2+ are well defined so use
+ * standard values.
+ */
+static int psci_0_2_init(struct device_node *np)
+{
+	int err, ver;
+
+	err = get_set_conduit_method(np);
+
+	if (err)
+		goto out_put_node;
+
+	ver = psci_get_version();
+
+	if (ver == PSCI_RET_NOT_SUPPORTED) {
+		/* PSCI v0.2 mandates implementation of PSCI_ID_VERSION. */
+		pr_err("PSCI firmware does not comply with the v0.2 spec.\n");
+		err = -EOPNOTSUPP;
 		goto out_put_node;
+	} else {
+		pr_info("PSCIv%d.%d detected in firmware.\n",
+				PSCI_VERSION_MAJOR(ver),
+				PSCI_VERSION_MINOR(ver));
+
+		if (PSCI_VERSION_MAJOR(ver) == 0 &&
+				PSCI_VERSION_MINOR(ver) < 2) {
+			err = -EINVAL;
+			pr_err("Conflicting PSCI version detected.\n");
+			goto out_put_node;
+		}
 	}
 
+	pr_info("Using standard PSCI v0.2 function IDs\n");
+	psci_function_id[PSCI_FN_CPU_SUSPEND] = PSCI_0_2_FN_CPU_SUSPEND;
+	psci_ops.cpu_suspend = psci_cpu_suspend;
+
+	psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF;
+	psci_ops.cpu_off = psci_cpu_off;
+
+	psci_function_id[PSCI_FN_CPU_ON] = PSCI_0_2_FN_CPU_ON;
+	psci_ops.cpu_on = psci_cpu_on;
+
+	psci_function_id[PSCI_FN_MIGRATE] = PSCI_0_2_FN_MIGRATE;
+	psci_ops.migrate = psci_migrate;
+
+	psci_function_id[PSCI_FN_AFFINITY_INFO] = PSCI_0_2_FN_AFFINITY_INFO;
+	psci_ops.affinity_info = psci_affinity_info;
+
+	psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE] =
+		PSCI_0_2_FN_MIGRATE_INFO_TYPE;
+	psci_ops.migrate_info_type = psci_migrate_info_type;
+
+	arm_pm_restart = psci_sys_reset;
+
+	pm_power_off = psci_sys_poweroff;
+
+out_put_node:
+	of_node_put(np);
+	return err;
+}
+
+/*
+ * PSCI < v0.2 get PSCI Function IDs via DT.
+ */
+static int psci_0_1_init(struct device_node *np)
+{
+	u32 id;
+	int err;
+
+	err = get_set_conduit_method(np);
+
+	if (err)
+		goto out_put_node;
+
+	pr_info("Using PSCI v0.1 Function IDs from DT\n");
+
 	if (!of_property_read_u32(np, "cpu_suspend", &id)) {
 		psci_function_id[PSCI_FN_CPU_SUSPEND] = id;
 		psci_ops.cpu_suspend = psci_cpu_suspend;
@@ -206,5 +308,25 @@ void __init psci_init(void)
 
 out_put_node:
 	of_node_put(np);
-	return;
+	return err;
+}
+
+static const struct of_device_id psci_of_match[] __initconst = {
+	{ .compatible = "arm,psci", .data = psci_0_1_init},
+	{ .compatible = "arm,psci-0.2", .data = psci_0_2_init},
+	{},
+};
+
+int __init psci_init(void)
+{
+	struct device_node *np;
+	const struct of_device_id *matched_np;
+	psci_initcall_t init_fn;
+
+	np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np);
+	if (!np)
+		return -ENODEV;
+
+	init_fn = (psci_initcall_t)matched_np->data;
+	return init_fn(np);
 }
diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c
index 570a48cc3d64..28a1db4da704 100644
--- a/arch/arm/kernel/psci_smp.c
+++ b/arch/arm/kernel/psci_smp.c
@@ -16,6 +16,8 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/of.h>
+#include <linux/delay.h>
+#include <uapi/linux/psci.h>
 
 #include <asm/psci.h>
 #include <asm/smp_plat.h>
@@ -66,6 +68,36 @@ void __ref psci_cpu_die(unsigned int cpu)
        /* We should never return */
        panic("psci: cpu %d failed to shutdown\n", cpu);
 }
+
+int __ref psci_cpu_kill(unsigned int cpu)
+{
+	int err, i;
+
+	if (!psci_ops.affinity_info)
+		return 1;
+	/*
+	 * cpu_kill could race with cpu_die and we can
+	 * potentially end up declaring this cpu undead
+	 * while it is dying. So, try again a few times.
+	 */
+
+	for (i = 0; i < 10; i++) {
+		err = psci_ops.affinity_info(cpu_logical_map(cpu), 0);
+		if (err == PSCI_0_2_AFFINITY_LEVEL_OFF) {
+			pr_info("CPU%d killed.\n", cpu);
+			return 1;
+		}
+
+		msleep(10);
+		pr_info("Retrying again to check for CPU kill\n");
+	}
+
+	pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n",
+			cpu, err);
+	/* Make platform_cpu_kill() fail. */
+	return 0;
+}
+
 #endif
 
 bool __init psci_smp_available(void)
@@ -78,5 +110,6 @@ struct smp_operations __initdata psci_smp_ops = {
 	.smp_boot_secondary	= psci_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= psci_cpu_die,
+	.cpu_kill		= psci_cpu_kill,
 #endif
 };
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 1e8b030dbefd..8a16ee5d8a95 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -72,6 +72,7 @@ static int __init fpe_setup(char *line)
 __setup("fpe=", fpe_setup);
 #endif
 
+extern void init_default_cache_policy(unsigned long);
 extern void paging_init(const struct machine_desc *desc);
 extern void early_paging_init(const struct machine_desc *,
 			      struct proc_info_list *);
@@ -100,6 +101,9 @@ EXPORT_SYMBOL(system_serial_high);
 unsigned int elf_hwcap __read_mostly;
 EXPORT_SYMBOL(elf_hwcap);
 
+unsigned int elf_hwcap2 __read_mostly;
+EXPORT_SYMBOL(elf_hwcap2);
+
 
 #ifdef MULTI_CPU
 struct processor processor __read_mostly;
@@ -587,7 +591,7 @@ static void __init setup_processor(void)
 
 	pr_info("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
 		cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
-		proc_arch[cpu_architecture()], cr_alignment);
+		proc_arch[cpu_architecture()], get_cr());
 
 	snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
 		 list->arch_name, ENDIANNESS);
@@ -600,7 +604,9 @@ static void __init setup_processor(void)
 #ifndef CONFIG_ARM_THUMB
 	elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
 #endif
-
+#ifdef CONFIG_MMU
+	init_default_cache_policy(list->__cpu_mm_mmu_flags);
+#endif
 	erratum_a15_798181_init();
 
 	feat_v6_fixup();
@@ -625,15 +631,8 @@ void __init dump_machine_table(void)
 
 int __init arm_add_memory(u64 start, u64 size)
 {
-	struct membank *bank = &meminfo.bank[meminfo.nr_banks];
 	u64 aligned_start;
 
-	if (meminfo.nr_banks >= NR_BANKS) {
-		pr_crit("NR_BANKS too low, ignoring memory at 0x%08llx\n",
-			(long long)start);
-		return -EINVAL;
-	}
-
 	/*
 	 * Ensure that start/size are aligned to a page boundary.
 	 * Size is appropriately rounded down, start is rounded up.
@@ -674,17 +673,17 @@ int __init arm_add_memory(u64 start, u64 size)
 		aligned_start = PHYS_OFFSET;
 	}
 
-	bank->start = aligned_start;
-	bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1);
+	start = aligned_start;
+	size = size & ~(phys_addr_t)(PAGE_SIZE - 1);
 
 	/*
 	 * Check whether this memory region has non-zero size or
 	 * invalid node number.
 	 */
-	if (bank->size == 0)
+	if (size == 0)
 		return -EINVAL;
 
-	meminfo.nr_banks++;
+	memblock_add(start, size);
 	return 0;
 }
 
@@ -692,6 +691,7 @@ int __init arm_add_memory(u64 start, u64 size)
  * Pick out the memory size.  We look for mem=size@start,
  * where start and size are "size[KkMm]"
  */
+
 static int __init early_mem(char *p)
 {
 	static int usermem __initdata = 0;
@@ -706,7 +706,8 @@ static int __init early_mem(char *p)
 	 */
 	if (usermem == 0) {
 		usermem = 1;
-		meminfo.nr_banks = 0;
+		memblock_remove(memblock_start_of_DRAM(),
+			memblock_end_of_DRAM() - memblock_start_of_DRAM());
 	}
 
 	start = PHYS_OFFSET;
@@ -851,13 +852,6 @@ static void __init reserve_crashkernel(void)
 static inline void reserve_crashkernel(void) {}
 #endif /* CONFIG_KEXEC */
 
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
-	const struct membank *a = _a, *b = _b;
-	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
-	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
-}
-
 void __init hyp_mode_check(void)
 {
 #ifdef CONFIG_ARM_VIRT_EXT
@@ -900,12 +894,10 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
-	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
-
 	early_paging_init(mdesc, lookup_processor_type(read_cpuid_id()));
 	setup_dma_zone(mdesc);
 	sanity_check_meminfo();
-	arm_memblock_init(&meminfo, mdesc);
+	arm_memblock_init(mdesc);
 
 	paging_init(mdesc);
 	request_standard_resources(mdesc);
@@ -1005,6 +997,15 @@ static const char *hwcap_str[] = {
 	NULL
 };
 
+static const char *hwcap2_str[] = {
+	"aes",
+	"pmull",
+	"sha1",
+	"sha2",
+	"crc32",
+	NULL
+};
+
 static int c_show(struct seq_file *m, void *v)
 {
 	int i, j;
@@ -1028,6 +1029,10 @@ static int c_show(struct seq_file *m, void *v)
 			if (elf_hwcap & (1 << j))
 				seq_printf(m, "%s ", hwcap_str[j]);
 
+		for (j = 0; hwcap2_str[j]; j++)
+			if (elf_hwcap2 & (1 << j))
+				seq_printf(m, "%s ", hwcap2_str[j]);
+
 		seq_printf(m, "\nCPU implementer\t: 0x%02x\n", cpuid >> 24);
 		seq_printf(m, "CPU architecture: %s\n",
 			   proc_arch[cpu_architecture()]);
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 04d63880037f..bd1983437205 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -13,6 +13,7 @@
 #include <linux/personality.h>
 #include <linux/uaccess.h>
 #include <linux/tracehook.h>
+#include <linux/uprobes.h>
 
 #include <asm/elf.h>
 #include <asm/cacheflush.h>
@@ -590,6 +591,9 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 					return restart;
 				}
 				syscall = 0;
+			} else if (thread_flags & _TIF_UPROBE) {
+				clear_thread_flag(TIF_UPROBE);
+				uprobe_notify_resume(regs);
 			} else {
 				clear_thread_flag(TIF_NOTIFY_RESUME);
 				tracehook_notify_resume(regs);
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index b907d9b790ab..1b880db2a033 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -127,6 +127,10 @@ ENDPROC(cpu_resume_after_mmu)
 	.align
 ENTRY(cpu_resume)
 ARM_BE8(setend be)			@ ensure we are in BE mode
+#ifdef CONFIG_ARM_VIRT_EXT
+	bl	__hyp_stub_install_secondary
+#endif
+	safe_svcmode_maskall r1
 	mov	r1, #0
 	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
 	ALT_UP_B(1f)
@@ -144,7 +148,6 @@ ARM_BE8(setend be)			@ ensure we are in BE mode
 	ldr	r0, [r0, #SLEEP_SAVE_SP_PHYS]
 	ldr	r0, [r0, r1, lsl #2]
 
-	setmode	PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1  @ set SVC, irqs off
 	@ load phys pgd, stack, resume fn
   ARM(	ldmia	r0!, {r1, sp, pc}	)
 THUMB(	ldmia	r0!, {r1, r2, r3}	)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index b7b4c86e338b..7c4fada440f0 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -674,8 +674,7 @@ static int cpufreq_callback(struct notifier_block *nb,
 	}
 
 	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
-	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
-	    (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) {
+	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) {
 		loops_per_jiffy = cpufreq_scale(global_l_p_j_ref,
 						global_l_p_j_ref_freq,
 						freq->new);
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 6591e26fc13f..dfc32130bc44 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -166,7 +166,7 @@ static int twd_cpufreq_transition(struct notifier_block *nb,
 	 * frequency.  The timer is local to a cpu, so cross-call to the
 	 * changing cpu.
 	 */
-	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
+	if (state == CPUFREQ_POSTCHANGE)
 		smp_call_function_single(freqs->cpu, twd_update_frequency,
 			NULL, 1);
 
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index af4e8c8a5422..f065eb05d254 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -3,6 +3,7 @@
 #include <linux/stacktrace.h>
 
 #include <asm/stacktrace.h>
+#include <asm/traps.h>
 
 #if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
 /*
@@ -61,6 +62,7 @@ EXPORT_SYMBOL(walk_stackframe);
 #ifdef CONFIG_STACKTRACE
 struct stack_trace_data {
 	struct stack_trace *trace;
+	unsigned long last_pc;
 	unsigned int no_sched_functions;
 	unsigned int skip;
 };
@@ -69,6 +71,7 @@ static int save_trace(struct stackframe *frame, void *d)
 {
 	struct stack_trace_data *data = d;
 	struct stack_trace *trace = data->trace;
+	struct pt_regs *regs;
 	unsigned long addr = frame->pc;
 
 	if (data->no_sched_functions && in_sched_functions(addr))
@@ -80,16 +83,39 @@ static int save_trace(struct stackframe *frame, void *d)
 
 	trace->entries[trace->nr_entries++] = addr;
 
+	if (trace->nr_entries >= trace->max_entries)
+		return 1;
+
+	/*
+	 * in_exception_text() is designed to test if the PC is one of
+	 * the functions which has an exception stack above it, but
+	 * unfortunately what is in frame->pc is the return LR value,
+	 * not the saved PC value.  So, we need to track the previous
+	 * frame PC value when doing this.
+	 */
+	addr = data->last_pc;
+	data->last_pc = frame->pc;
+	if (!in_exception_text(addr))
+		return 0;
+
+	regs = (struct pt_regs *)frame->sp;
+
+	trace->entries[trace->nr_entries++] = regs->ARM_pc;
+
 	return trace->nr_entries >= trace->max_entries;
 }
 
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+/* This must be noinline to so that our skip calculation works correctly */
+static noinline void __save_stack_trace(struct task_struct *tsk,
+	struct stack_trace *trace, unsigned int nosched)
 {
 	struct stack_trace_data data;
 	struct stackframe frame;
 
 	data.trace = trace;
+	data.last_pc = ULONG_MAX;
 	data.skip = trace->skip;
+	data.no_sched_functions = nosched;
 
 	if (tsk != current) {
 #ifdef CONFIG_SMP
@@ -102,7 +128,6 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 			trace->entries[trace->nr_entries++] = ULONG_MAX;
 		return;
 #else
-		data.no_sched_functions = 1;
 		frame.fp = thread_saved_fp(tsk);
 		frame.sp = thread_saved_sp(tsk);
 		frame.lr = 0;		/* recovered from the stack */
@@ -111,11 +136,12 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 	} else {
 		register unsigned long current_sp asm ("sp");
 
-		data.no_sched_functions = 0;
+		/* We don't want this function nor the caller */
+		data.skip += 2;
 		frame.fp = (unsigned long)__builtin_frame_address(0);
 		frame.sp = current_sp;
 		frame.lr = (unsigned long)__builtin_return_address(0);
-		frame.pc = (unsigned long)save_stack_trace_tsk;
+		frame.pc = (unsigned long)__save_stack_trace;
 	}
 
 	walk_stackframe(&frame, save_trace, &data);
@@ -123,9 +149,33 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
 
+void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace)
+{
+	struct stack_trace_data data;
+	struct stackframe frame;
+
+	data.trace = trace;
+	data.skip = trace->skip;
+	data.no_sched_functions = 0;
+
+	frame.fp = regs->ARM_fp;
+	frame.sp = regs->ARM_sp;
+	frame.lr = regs->ARM_lr;
+	frame.pc = regs->ARM_pc;
+
+	walk_stackframe(&frame, save_trace, &data);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	__save_stack_trace(tsk, trace, 1);
+}
+
 void save_stack_trace(struct stack_trace *trace)
 {
-	save_stack_trace_tsk(current, trace);
+	__save_stack_trace(current, trace, 0);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 #endif
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 3e94811690ce..e90a3148f385 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -203,6 +203,9 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
 	int ret;
 
 	switch (cmd) {
+	case F_OFD_GETLK:
+	case F_OFD_SETLK:
+	case F_OFD_SETLKW:
 	case F_GETLK64:
 	case F_SETLK64:
 	case F_SETLKW64:
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 0bc94b1fd1ae..3997c411c140 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -91,13 +91,13 @@ static void __init parse_dt_topology(void)
 {
 	const struct cpu_efficiency *cpu_eff;
 	struct device_node *cn = NULL;
-	unsigned long min_capacity = (unsigned long)(-1);
+	unsigned long min_capacity = ULONG_MAX;
 	unsigned long max_capacity = 0;
 	unsigned long capacity = 0;
-	int alloc_size, cpu = 0;
+	int cpu = 0;
 
-	alloc_size = nr_cpu_ids * sizeof(*__cpu_capacity);
-	__cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT);
+	__cpu_capacity = kcalloc(nr_cpu_ids, sizeof(*__cpu_capacity),
+				 GFP_NOWAIT);
 
 	for_each_possible_cpu(cpu) {
 		const u32 *rate;
@@ -185,6 +185,15 @@ const struct cpumask *cpu_coregroup_mask(int cpu)
 	return &cpu_topology[cpu].core_sibling;
 }
 
+/*
+ * The current assumption is that we can power gate each core independently.
+ * This will be superseded by DT binding once available.
+ */
+const struct cpumask *cpu_corepower_mask(int cpu)
+{
+	return &cpu_topology[cpu].thread_sibling;
+}
+
 static void update_siblings_masks(unsigned int cpuid)
 {
 	struct cputopo_arm *cpu_topo, *cpuid_topo = &cpu_topology[cpuid];
@@ -266,6 +275,20 @@ void store_cpu_topology(unsigned int cpuid)
 		cpu_topology[cpuid].socket_id, mpidr);
 }
 
+static inline const int cpu_corepower_flags(void)
+{
+	return SD_SHARE_PKG_RESOURCES  | SD_SHARE_POWERDOMAIN;
+}
+
+static struct sched_domain_topology_level arm_topology[] = {
+#ifdef CONFIG_SCHED_MC
+	{ cpu_corepower_mask, cpu_corepower_flags, SD_INIT_NAME(GMC) },
+	{ cpu_coregroup_mask, cpu_core_flags, SD_INIT_NAME(MC) },
+#endif
+	{ cpu_cpu_mask, SD_INIT_NAME(DIE) },
+	{ NULL, },
+};
+
 /*
  * init_cpu_topology is called at boot when only one cpu is running
  * which prevent simultaneous write access to cpu_topology array
@@ -289,4 +312,7 @@ void __init init_cpu_topology(void)
 	smp_wmb();
 
 	parse_dt_topology();
+
+	/* Set scheduler topology descriptor */
+	set_sched_topology(arm_topology);
 }
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 172ee18ff124..abd2fc067736 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -445,6 +445,7 @@ die_sig:
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
 			current->comm, task_pid_nr(current), pc);
+		__show_regs(regs);
 		dump_instr(KERN_INFO, regs);
 	}
 #endif
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 00df012c4678..e67682f02cb2 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -31,7 +31,7 @@
 #warning Your compiler does not have EABI support.
 #warning    ARM unwind is known to compile only with EABI compilers.
 #warning    Change compiler or disable ARM_UNWIND option.
-#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2)
+#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2) && !defined(__clang__)
 #warning Your compiler is too buggy; it is known to not compile ARM unwind support.
 #warning    Change compiler or disable ARM_UNWIND option.
 #endif
@@ -68,6 +68,12 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
 struct unwind_ctrl_block {
 	unsigned long vrs[16];		/* virtual register set */
 	const unsigned long *insn;	/* pointer to the current instructions word */
+	unsigned long sp_high;		/* highest value of sp allowed */
+	/*
+	 * 1 : check for stack overflow for each register pop.
+	 * 0 : save overhead if there is plenty of stack remaining.
+	 */
+	int check_each_pop;
 	int entries;			/* number of entries left to interpret */
 	int byte;			/* current byte number in the instructions word */
 };
@@ -235,12 +241,85 @@ static unsigned long unwind_get_byte(struct unwind_ctrl_block *ctrl)
 	return ret;
 }
 
+/* Before poping a register check whether it is feasible or not */
+static int unwind_pop_register(struct unwind_ctrl_block *ctrl,
+				unsigned long **vsp, unsigned int reg)
+{
+	if (unlikely(ctrl->check_each_pop))
+		if (*vsp >= (unsigned long *)ctrl->sp_high)
+			return -URC_FAILURE;
+
+	ctrl->vrs[reg] = *(*vsp)++;
+	return URC_OK;
+}
+
+/* Helper functions to execute the instructions */
+static int unwind_exec_pop_subset_r4_to_r13(struct unwind_ctrl_block *ctrl,
+						unsigned long mask)
+{
+	unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+	int load_sp, reg = 4;
+
+	load_sp = mask & (1 << (13 - 4));
+	while (mask) {
+		if (mask & 1)
+			if (unwind_pop_register(ctrl, &vsp, reg))
+				return -URC_FAILURE;
+		mask >>= 1;
+		reg++;
+	}
+	if (!load_sp)
+		ctrl->vrs[SP] = (unsigned long)vsp;
+
+	return URC_OK;
+}
+
+static int unwind_exec_pop_r4_to_rN(struct unwind_ctrl_block *ctrl,
+					unsigned long insn)
+{
+	unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+	int reg;
+
+	/* pop R4-R[4+bbb] */
+	for (reg = 4; reg <= 4 + (insn & 7); reg++)
+		if (unwind_pop_register(ctrl, &vsp, reg))
+				return -URC_FAILURE;
+
+	if (insn & 0x8)
+		if (unwind_pop_register(ctrl, &vsp, 14))
+				return -URC_FAILURE;
+
+	ctrl->vrs[SP] = (unsigned long)vsp;
+
+	return URC_OK;
+}
+
+static int unwind_exec_pop_subset_r0_to_r3(struct unwind_ctrl_block *ctrl,
+						unsigned long mask)
+{
+	unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+	int reg = 0;
+
+	/* pop R0-R3 according to mask */
+	while (mask) {
+		if (mask & 1)
+			if (unwind_pop_register(ctrl, &vsp, reg))
+				return -URC_FAILURE;
+		mask >>= 1;
+		reg++;
+	}
+	ctrl->vrs[SP] = (unsigned long)vsp;
+
+	return URC_OK;
+}
+
 /*
  * Execute the current unwind instruction.
  */
 static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 {
 	unsigned long insn = unwind_get_byte(ctrl);
+	int ret = URC_OK;
 
 	pr_debug("%s: insn = %08lx\n", __func__, insn);
 
@@ -250,8 +329,6 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 		ctrl->vrs[SP] -= ((insn & 0x3f) << 2) + 4;
 	else if ((insn & 0xf0) == 0x80) {
 		unsigned long mask;
-		unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
-		int load_sp, reg = 4;
 
 		insn = (insn << 8) | unwind_get_byte(ctrl);
 		mask = insn & 0x0fff;
@@ -261,29 +338,16 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 			return -URC_FAILURE;
 		}
 
-		/* pop R4-R15 according to mask */
-		load_sp = mask & (1 << (13 - 4));
-		while (mask) {
-			if (mask & 1)
-				ctrl->vrs[reg] = *vsp++;
-			mask >>= 1;
-			reg++;
-		}
-		if (!load_sp)
-			ctrl->vrs[SP] = (unsigned long)vsp;
+		ret = unwind_exec_pop_subset_r4_to_r13(ctrl, mask);
+		if (ret)
+			goto error;
 	} else if ((insn & 0xf0) == 0x90 &&
 		   (insn & 0x0d) != 0x0d)
 		ctrl->vrs[SP] = ctrl->vrs[insn & 0x0f];
 	else if ((insn & 0xf0) == 0xa0) {
-		unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
-		int reg;
-
-		/* pop R4-R[4+bbb] */
-		for (reg = 4; reg <= 4 + (insn & 7); reg++)
-			ctrl->vrs[reg] = *vsp++;
-		if (insn & 0x80)
-			ctrl->vrs[14] = *vsp++;
-		ctrl->vrs[SP] = (unsigned long)vsp;
+		ret = unwind_exec_pop_r4_to_rN(ctrl, insn);
+		if (ret)
+			goto error;
 	} else if (insn == 0xb0) {
 		if (ctrl->vrs[PC] == 0)
 			ctrl->vrs[PC] = ctrl->vrs[LR];
@@ -291,8 +355,6 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 		ctrl->entries = 0;
 	} else if (insn == 0xb1) {
 		unsigned long mask = unwind_get_byte(ctrl);
-		unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
-		int reg = 0;
 
 		if (mask == 0 || mask & 0xf0) {
 			pr_warning("unwind: Spare encoding %04lx\n",
@@ -300,14 +362,9 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 			return -URC_FAILURE;
 		}
 
-		/* pop R0-R3 according to mask */
-		while (mask) {
-			if (mask & 1)
-				ctrl->vrs[reg] = *vsp++;
-			mask >>= 1;
-			reg++;
-		}
-		ctrl->vrs[SP] = (unsigned long)vsp;
+		ret = unwind_exec_pop_subset_r0_to_r3(ctrl, mask);
+		if (ret)
+			goto error;
 	} else if (insn == 0xb2) {
 		unsigned long uleb128 = unwind_get_byte(ctrl);
 
@@ -320,7 +377,8 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 	pr_debug("%s: fp = %08lx sp = %08lx lr = %08lx pc = %08lx\n", __func__,
 		 ctrl->vrs[FP], ctrl->vrs[SP], ctrl->vrs[LR], ctrl->vrs[PC]);
 
-	return URC_OK;
+error:
+	return ret;
 }
 
 /*
@@ -329,13 +387,13 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
  */
 int unwind_frame(struct stackframe *frame)
 {
-	unsigned long high, low;
+	unsigned long low;
 	const struct unwind_idx *idx;
 	struct unwind_ctrl_block ctrl;
 
-	/* only go to a higher address on the stack */
+	/* store the highest address on the stack to avoid crossing it*/
 	low = frame->sp;
-	high = ALIGN(low, THREAD_SIZE);
+	ctrl.sp_high = ALIGN(low, THREAD_SIZE);
 
 	pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
 		 frame->pc, frame->lr, frame->sp);
@@ -382,11 +440,16 @@ int unwind_frame(struct stackframe *frame)
 		return -URC_FAILURE;
 	}
 
+	ctrl.check_each_pop = 0;
+
 	while (ctrl.entries > 0) {
-		int urc = unwind_exec_insn(&ctrl);
+		int urc;
+		if ((ctrl.sp_high - ctrl.vrs[SP]) < sizeof(ctrl.vrs))
+			ctrl.check_each_pop = 1;
+		urc = unwind_exec_insn(&ctrl);
 		if (urc < 0)
 			return urc;
-		if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high)
+		if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= ctrl.sp_high)
 			return -URC_FAILURE;
 	}
 
diff --git a/arch/arm/kernel/uprobes-arm.c b/arch/arm/kernel/uprobes-arm.c
new file mode 100644
index 000000000000..d3b655ff17da
--- /dev/null
+++ b/arch/arm/kernel/uprobes-arm.c
@@ -0,0 +1,234 @@
+/*
+ * Copyright (C) 2012 Rabin Vincent <rabin at rab.in>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/wait.h>
+#include <linux/uprobes.h>
+#include <linux/module.h>
+
+#include "probes.h"
+#include "probes-arm.h"
+#include "uprobes.h"
+
+static int uprobes_substitute_pc(unsigned long *pinsn, u32 oregs)
+{
+	probes_opcode_t insn = __mem_to_opcode_arm(*pinsn);
+	probes_opcode_t temp;
+	probes_opcode_t mask;
+	int freereg;
+	u32 free = 0xffff;
+	u32 regs;
+
+	for (regs = oregs; regs; regs >>= 4, insn >>= 4) {
+		if ((regs & 0xf) == REG_TYPE_NONE)
+			continue;
+
+		free &= ~(1 << (insn & 0xf));
+	}
+
+	/* No PC, no problem */
+	if (free & (1 << 15))
+		return 15;
+
+	if (!free)
+		return -1;
+
+	/*
+	 * fls instead of ffs ensures that for "ldrd r0, r1, [pc]" we would
+	 * pick LR instead of R1.
+	 */
+	freereg = free = fls(free) - 1;
+
+	temp = __mem_to_opcode_arm(*pinsn);
+	insn = temp;
+	regs = oregs;
+	mask = 0xf;
+
+	for (; regs; regs >>= 4, mask <<= 4, free <<= 4, temp >>= 4) {
+		if ((regs & 0xf) == REG_TYPE_NONE)
+			continue;
+
+		if ((temp & 0xf) != 15)
+			continue;
+
+		insn &= ~mask;
+		insn |= free & mask;
+	}
+
+	*pinsn = __opcode_to_mem_arm(insn);
+	return freereg;
+}
+
+static void uprobe_set_pc(struct arch_uprobe *auprobe,
+			  struct arch_uprobe_task *autask,
+			  struct pt_regs *regs)
+{
+	u32 pcreg = auprobe->pcreg;
+
+	autask->backup = regs->uregs[pcreg];
+	regs->uregs[pcreg] = regs->ARM_pc + 8;
+}
+
+static void uprobe_unset_pc(struct arch_uprobe *auprobe,
+			    struct arch_uprobe_task *autask,
+			    struct pt_regs *regs)
+{
+	/* PC will be taken care of by common code */
+	regs->uregs[auprobe->pcreg] = autask->backup;
+}
+
+static void uprobe_aluwrite_pc(struct arch_uprobe *auprobe,
+			       struct arch_uprobe_task *autask,
+			       struct pt_regs *regs)
+{
+	u32 pcreg = auprobe->pcreg;
+
+	alu_write_pc(regs->uregs[pcreg], regs);
+	regs->uregs[pcreg] = autask->backup;
+}
+
+static void uprobe_write_pc(struct arch_uprobe *auprobe,
+			    struct arch_uprobe_task *autask,
+			    struct pt_regs *regs)
+{
+	u32 pcreg = auprobe->pcreg;
+
+	load_write_pc(regs->uregs[pcreg], regs);
+	regs->uregs[pcreg] = autask->backup;
+}
+
+enum probes_insn
+decode_pc_ro(probes_opcode_t insn, struct arch_probes_insn *asi,
+	     const struct decode_header *d)
+{
+	struct arch_uprobe *auprobe = container_of(asi, struct arch_uprobe,
+						   asi);
+	struct decode_emulate *decode = (struct decode_emulate *) d;
+	u32 regs = decode->header.type_regs.bits >> DECODE_TYPE_BITS;
+	int reg;
+
+	reg = uprobes_substitute_pc(&auprobe->ixol[0], regs);
+	if (reg == 15)
+		return INSN_GOOD;
+
+	if (reg == -1)
+		return INSN_REJECTED;
+
+	auprobe->pcreg = reg;
+	auprobe->prehandler = uprobe_set_pc;
+	auprobe->posthandler = uprobe_unset_pc;
+
+	return INSN_GOOD;
+}
+
+enum probes_insn
+decode_wb_pc(probes_opcode_t insn, struct arch_probes_insn *asi,
+	     const struct decode_header *d, bool alu)
+{
+	struct arch_uprobe *auprobe = container_of(asi, struct arch_uprobe,
+						   asi);
+	enum probes_insn ret = decode_pc_ro(insn, asi, d);
+
+	if (((insn >> 12) & 0xf) == 15)
+		auprobe->posthandler = alu ? uprobe_aluwrite_pc
+					   : uprobe_write_pc;
+
+	return ret;
+}
+
+enum probes_insn
+decode_rd12rn16rm0rs8_rwflags(probes_opcode_t insn,
+			      struct arch_probes_insn *asi,
+			      const struct decode_header *d)
+{
+	return decode_wb_pc(insn, asi, d, true);
+}
+
+enum probes_insn
+decode_ldr(probes_opcode_t insn, struct arch_probes_insn *asi,
+	   const struct decode_header *d)
+{
+	return decode_wb_pc(insn, asi, d, false);
+}
+
+enum probes_insn
+uprobe_decode_ldmstm(probes_opcode_t insn,
+		     struct arch_probes_insn *asi,
+		     const struct decode_header *d)
+{
+	struct arch_uprobe *auprobe = container_of(asi, struct arch_uprobe,
+						   asi);
+	unsigned reglist = insn & 0xffff;
+	int rn = (insn >> 16) & 0xf;
+	int lbit = insn & (1 << 20);
+	unsigned used = reglist | (1 << rn);
+
+	if (rn == 15)
+		return INSN_REJECTED;
+
+	if (!(used & (1 << 15)))
+		return INSN_GOOD;
+
+	if (used & (1 << 14))
+		return INSN_REJECTED;
+
+	/* Use LR instead of PC */
+	insn ^= 0xc000;
+
+	auprobe->pcreg = 14;
+	auprobe->ixol[0] = __opcode_to_mem_arm(insn);
+
+	auprobe->prehandler = uprobe_set_pc;
+	if (lbit)
+		auprobe->posthandler = uprobe_write_pc;
+	else
+		auprobe->posthandler = uprobe_unset_pc;
+
+	return INSN_GOOD;
+}
+
+const union decode_action uprobes_probes_actions[] = {
+	[PROBES_EMULATE_NONE] = {.handler = probes_simulate_nop},
+	[PROBES_SIMULATE_NOP] = {.handler = probes_simulate_nop},
+	[PROBES_PRELOAD_IMM] = {.handler = probes_simulate_nop},
+	[PROBES_PRELOAD_REG] = {.handler = probes_simulate_nop},
+	[PROBES_BRANCH_IMM] = {.handler = simulate_blx1},
+	[PROBES_MRS] = {.handler = simulate_mrs},
+	[PROBES_BRANCH_REG] = {.handler = simulate_blx2bx},
+	[PROBES_CLZ] = {.handler = probes_simulate_nop},
+	[PROBES_SATURATING_ARITHMETIC] = {.handler = probes_simulate_nop},
+	[PROBES_MUL1] = {.handler = probes_simulate_nop},
+	[PROBES_MUL2] = {.handler = probes_simulate_nop},
+	[PROBES_SWP] = {.handler = probes_simulate_nop},
+	[PROBES_LDRSTRD] = {.decoder = decode_pc_ro},
+	[PROBES_LOAD_EXTRA] = {.decoder = decode_pc_ro},
+	[PROBES_LOAD] = {.decoder = decode_ldr},
+	[PROBES_STORE_EXTRA] = {.decoder = decode_pc_ro},
+	[PROBES_STORE] = {.decoder = decode_pc_ro},
+	[PROBES_MOV_IP_SP] = {.handler = simulate_mov_ipsp},
+	[PROBES_DATA_PROCESSING_REG] = {
+		.decoder = decode_rd12rn16rm0rs8_rwflags},
+	[PROBES_DATA_PROCESSING_IMM] = {
+		.decoder = decode_rd12rn16rm0rs8_rwflags},
+	[PROBES_MOV_HALFWORD] = {.handler = probes_simulate_nop},
+	[PROBES_SEV] = {.handler = probes_simulate_nop},
+	[PROBES_WFE] = {.handler = probes_simulate_nop},
+	[PROBES_SATURATE] = {.handler = probes_simulate_nop},
+	[PROBES_REV] = {.handler = probes_simulate_nop},
+	[PROBES_MMI] = {.handler = probes_simulate_nop},
+	[PROBES_PACK] = {.handler = probes_simulate_nop},
+	[PROBES_EXTEND] = {.handler = probes_simulate_nop},
+	[PROBES_EXTEND_ADD] = {.handler = probes_simulate_nop},
+	[PROBES_MUL_ADD_LONG] = {.handler = probes_simulate_nop},
+	[PROBES_MUL_ADD] = {.handler = probes_simulate_nop},
+	[PROBES_BITFIELD] = {.handler = probes_simulate_nop},
+	[PROBES_BRANCH] = {.handler = simulate_bbl},
+	[PROBES_LDMSTM] = {.decoder = uprobe_decode_ldmstm}
+};
diff --git a/arch/arm/kernel/uprobes.c b/arch/arm/kernel/uprobes.c
new file mode 100644
index 000000000000..56adf9c1fde0
--- /dev/null
+++ b/arch/arm/kernel/uprobes.c
@@ -0,0 +1,230 @@
+/*
+ * Copyright (C) 2012 Rabin Vincent <rabin at rab.in>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/errno.h>
+#include <linux/highmem.h>
+#include <linux/sched.h>
+#include <linux/uprobes.h>
+#include <linux/notifier.h>
+
+#include <asm/opcodes.h>
+#include <asm/traps.h>
+
+#include "probes.h"
+#include "probes-arm.h"
+#include "uprobes.h"
+
+#define UPROBE_TRAP_NR	UINT_MAX
+
+bool is_swbp_insn(uprobe_opcode_t *insn)
+{
+	return (__mem_to_opcode_arm(*insn) & 0x0fffffff) ==
+		(UPROBE_SWBP_ARM_INSN & 0x0fffffff);
+}
+
+int set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm,
+	     unsigned long vaddr)
+{
+	return uprobe_write_opcode(mm, vaddr,
+		   __opcode_to_mem_arm(auprobe->bpinsn));
+}
+
+bool arch_uprobe_ignore(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	if (!auprobe->asi.insn_check_cc(regs->ARM_cpsr)) {
+		regs->ARM_pc += 4;
+		return true;
+	}
+
+	return false;
+}
+
+bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	probes_opcode_t opcode;
+
+	if (!auprobe->simulate)
+		return false;
+
+	opcode = __mem_to_opcode_arm(*(unsigned int *) auprobe->insn);
+
+	auprobe->asi.insn_singlestep(opcode, &auprobe->asi, regs);
+
+	return true;
+}
+
+unsigned long
+arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr,
+				  struct pt_regs *regs)
+{
+	unsigned long orig_ret_vaddr;
+
+	orig_ret_vaddr = regs->ARM_lr;
+	/* Replace the return addr with trampoline addr */
+	regs->ARM_lr = trampoline_vaddr;
+	return orig_ret_vaddr;
+}
+
+int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm,
+			     unsigned long addr)
+{
+	unsigned int insn;
+	unsigned int bpinsn;
+	enum probes_insn ret;
+
+	/* Thumb not yet support */
+	if (addr & 0x3)
+		return -EINVAL;
+
+	insn = __mem_to_opcode_arm(*(unsigned int *)auprobe->insn);
+	auprobe->ixol[0] = __opcode_to_mem_arm(insn);
+	auprobe->ixol[1] = __opcode_to_mem_arm(UPROBE_SS_ARM_INSN);
+
+	ret = arm_probes_decode_insn(insn, &auprobe->asi, false,
+				     uprobes_probes_actions);
+	switch (ret) {
+	case INSN_REJECTED:
+		return -EINVAL;
+
+	case INSN_GOOD_NO_SLOT:
+		auprobe->simulate = true;
+		break;
+
+	case INSN_GOOD:
+	default:
+		break;
+	}
+
+	bpinsn = UPROBE_SWBP_ARM_INSN & 0x0fffffff;
+	if (insn >= 0xe0000000)
+		bpinsn |= 0xe0000000;  /* Unconditional instruction */
+	else
+		bpinsn |= insn & 0xf0000000;  /* Copy condition from insn */
+
+	auprobe->bpinsn = bpinsn;
+
+	return 0;
+}
+
+void arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
+			   void *src, unsigned long len)
+{
+	void *xol_page_kaddr = kmap_atomic(page);
+	void *dst = xol_page_kaddr + (vaddr & ~PAGE_MASK);
+
+	preempt_disable();
+
+	/* Initialize the slot */
+	memcpy(dst, src, len);
+
+	/* flush caches (dcache/icache) */
+	flush_uprobe_xol_access(page, vaddr, dst, len);
+
+	preempt_enable();
+
+	kunmap_atomic(xol_page_kaddr);
+}
+
+
+int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	if (auprobe->prehandler)
+		auprobe->prehandler(auprobe, &utask->autask, regs);
+
+	utask->autask.saved_trap_no = current->thread.trap_no;
+	current->thread.trap_no = UPROBE_TRAP_NR;
+	regs->ARM_pc = utask->xol_vaddr;
+
+	return 0;
+}
+
+int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	WARN_ON_ONCE(current->thread.trap_no != UPROBE_TRAP_NR);
+
+	current->thread.trap_no = utask->autask.saved_trap_no;
+	regs->ARM_pc = utask->vaddr + 4;
+
+	if (auprobe->posthandler)
+		auprobe->posthandler(auprobe, &utask->autask, regs);
+
+	return 0;
+}
+
+bool arch_uprobe_xol_was_trapped(struct task_struct *t)
+{
+	if (t->thread.trap_no != UPROBE_TRAP_NR)
+		return true;
+
+	return false;
+}
+
+void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	current->thread.trap_no = utask->autask.saved_trap_no;
+	instruction_pointer_set(regs, utask->vaddr);
+}
+
+int arch_uprobe_exception_notify(struct notifier_block *self,
+				 unsigned long val, void *data)
+{
+	return NOTIFY_DONE;
+}
+
+static int uprobe_trap_handler(struct pt_regs *regs, unsigned int instr)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	instr &= 0x0fffffff;
+	if (instr == (UPROBE_SWBP_ARM_INSN & 0x0fffffff))
+		uprobe_pre_sstep_notifier(regs);
+	else if (instr == (UPROBE_SS_ARM_INSN & 0x0fffffff))
+		uprobe_post_sstep_notifier(regs);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+unsigned long uprobe_get_swbp_addr(struct pt_regs *regs)
+{
+	return instruction_pointer(regs);
+}
+
+static struct undef_hook uprobes_arm_break_hook = {
+	.instr_mask	= 0x0fffffff,
+	.instr_val	= (UPROBE_SWBP_ARM_INSN & 0x0fffffff),
+	.cpsr_mask	= MODE_MASK,
+	.cpsr_val	= USR_MODE,
+	.fn		= uprobe_trap_handler,
+};
+
+static struct undef_hook uprobes_arm_ss_hook = {
+	.instr_mask	= 0x0fffffff,
+	.instr_val	= (UPROBE_SS_ARM_INSN & 0x0fffffff),
+	.cpsr_mask	= MODE_MASK,
+	.cpsr_val	= USR_MODE,
+	.fn		= uprobe_trap_handler,
+};
+
+static int arch_uprobes_init(void)
+{
+	register_undef_hook(&uprobes_arm_break_hook);
+	register_undef_hook(&uprobes_arm_ss_hook);
+
+	return 0;
+}
+device_initcall(arch_uprobes_init);
diff --git a/arch/arm/kernel/uprobes.h b/arch/arm/kernel/uprobes.h
new file mode 100644
index 000000000000..1d0c12dfbd03
--- /dev/null
+++ b/arch/arm/kernel/uprobes.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2012 Rabin Vincent <rabin at rab.in>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARM_KERNEL_UPROBES_H
+#define __ARM_KERNEL_UPROBES_H
+
+enum probes_insn uprobe_decode_ldmstm(probes_opcode_t insn,
+				      struct arch_probes_insn *asi,
+				      const struct decode_header *d);
+
+enum probes_insn decode_ldr(probes_opcode_t insn,
+			    struct arch_probes_insn *asi,
+			    const struct decode_header *d);
+
+enum probes_insn
+decode_rd12rn16rm0rs8_rwflags(probes_opcode_t insn,
+			      struct arch_probes_insn *asi,
+			      const struct decode_header *d);
+
+enum probes_insn
+decode_wb_pc(probes_opcode_t insn, struct arch_probes_insn *asi,
+	     const struct decode_header *d, bool alu);
+
+enum probes_insn
+decode_pc_ro(probes_opcode_t insn, struct arch_probes_insn *asi,
+	     const struct decode_header *d);
+
+extern const union decode_action uprobes_probes_actions[];
+
+#endif
diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig
index 466bd299b1a8..4be5bb150bdd 100644
--- a/arch/arm/kvm/Kconfig
+++ b/arch/arm/kvm/Kconfig
@@ -23,7 +23,7 @@ config KVM
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select KVM_MMIO
 	select KVM_ARM_HOST
-	depends on ARM_VIRT_EXT && ARM_LPAE
+	depends on ARM_VIRT_EXT && ARM_LPAE && !CPU_BIG_ENDIAN
 	---help---
 	  Support hosting virtualized guest machines. You will also
 	  need to select one or more of the processor modules below.
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index bd18bb8b2770..3c82b37c0f9e 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -197,6 +197,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
 	case KVM_CAP_ONE_REG:
 	case KVM_CAP_ARM_PSCI:
+	case KVM_CAP_ARM_PSCI_0_2:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -1051,21 +1052,26 @@ int kvm_arch_init(void *opaque)
 		}
 	}
 
+	cpu_notifier_register_begin();
+
 	err = init_hyp_mode();
 	if (err)
 		goto out_err;
 
-	err = register_cpu_notifier(&hyp_init_cpu_nb);
+	err = __register_cpu_notifier(&hyp_init_cpu_nb);
 	if (err) {
 		kvm_err("Cannot register HYP init CPU notifier (%d)\n", err);
 		goto out_err;
 	}
 
+	cpu_notifier_register_done();
+
 	hyp_cpu_pm_init();
 
 	kvm_coproc_table_init();
 	return 0;
 out_err:
+	cpu_notifier_register_done();
 	return err;
 }
 
diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c
index 78c0885d6501..c58a35116f63 100644
--- a/arch/arm/kvm/coproc.c
+++ b/arch/arm/kvm/coproc.c
@@ -23,6 +23,7 @@
 #include <asm/kvm_host.h>
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_coproc.h>
+#include <asm/kvm_mmu.h>
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
 #include <trace/events/kvm.h>
@@ -205,6 +206,44 @@ done:
 }
 
 /*
+ * Generic accessor for VM registers. Only called as long as HCR_TVM
+ * is set.
+ */
+static bool access_vm_reg(struct kvm_vcpu *vcpu,
+			  const struct coproc_params *p,
+			  const struct coproc_reg *r)
+{
+	BUG_ON(!p->is_write);
+
+	vcpu->arch.cp15[r->reg] = *vcpu_reg(vcpu, p->Rt1);
+	if (p->is_64bit)
+		vcpu->arch.cp15[r->reg + 1] = *vcpu_reg(vcpu, p->Rt2);
+
+	return true;
+}
+
+/*
+ * SCTLR accessor. Only called as long as HCR_TVM is set.  If the
+ * guest enables the MMU, we stop trapping the VM sys_regs and leave
+ * it in complete control of the caches.
+ *
+ * Used by the cpu-specific code.
+ */
+bool access_sctlr(struct kvm_vcpu *vcpu,
+		  const struct coproc_params *p,
+		  const struct coproc_reg *r)
+{
+	access_vm_reg(vcpu, p, r);
+
+	if (vcpu_has_cache_enabled(vcpu)) {	/* MMU+Caches enabled? */
+		vcpu->arch.hcr &= ~HCR_TVM;
+		stage2_flush_vm(vcpu->kvm);
+	}
+
+	return true;
+}
+
+/*
  * We could trap ID_DFR0 and tell the guest we don't support performance
  * monitoring.  Unfortunately the patch to make the kernel check ID_DFR0 was
  * NAKed, so it will read the PMCR anyway.
@@ -261,33 +300,36 @@ static const struct coproc_reg cp15_regs[] = {
 	{ CRn( 1), CRm( 0), Op1( 0), Op2( 2), is32,
 			NULL, reset_val, c1_CPACR, 0x00000000 },
 
-	/* TTBR0/TTBR1: swapped by interrupt.S. */
-	{ CRm64( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 },
-	{ CRm64( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 },
-
-	/* TTBCR: swapped by interrupt.S. */
+	/* TTBR0/TTBR1/TTBCR: swapped by interrupt.S. */
+	{ CRm64( 2), Op1( 0), is64, access_vm_reg, reset_unknown64, c2_TTBR0 },
+	{ CRn(2), CRm( 0), Op1( 0), Op2( 0), is32,
+			access_vm_reg, reset_unknown, c2_TTBR0 },
+	{ CRn(2), CRm( 0), Op1( 0), Op2( 1), is32,
+			access_vm_reg, reset_unknown, c2_TTBR1 },
 	{ CRn( 2), CRm( 0), Op1( 0), Op2( 2), is32,
-			NULL, reset_val, c2_TTBCR, 0x00000000 },
+			access_vm_reg, reset_val, c2_TTBCR, 0x00000000 },
+	{ CRm64( 2), Op1( 1), is64, access_vm_reg, reset_unknown64, c2_TTBR1 },
+
 
 	/* DACR: swapped by interrupt.S. */
 	{ CRn( 3), CRm( 0), Op1( 0), Op2( 0), is32,
-			NULL, reset_unknown, c3_DACR },
+			access_vm_reg, reset_unknown, c3_DACR },
 
 	/* DFSR/IFSR/ADFSR/AIFSR: swapped by interrupt.S. */
 	{ CRn( 5), CRm( 0), Op1( 0), Op2( 0), is32,
-			NULL, reset_unknown, c5_DFSR },
+			access_vm_reg, reset_unknown, c5_DFSR },
 	{ CRn( 5), CRm( 0), Op1( 0), Op2( 1), is32,
-			NULL, reset_unknown, c5_IFSR },
+			access_vm_reg, reset_unknown, c5_IFSR },
 	{ CRn( 5), CRm( 1), Op1( 0), Op2( 0), is32,
-			NULL, reset_unknown, c5_ADFSR },
+			access_vm_reg, reset_unknown, c5_ADFSR },
 	{ CRn( 5), CRm( 1), Op1( 0), Op2( 1), is32,
-			NULL, reset_unknown, c5_AIFSR },
+			access_vm_reg, reset_unknown, c5_AIFSR },
 
 	/* DFAR/IFAR: swapped by interrupt.S. */
 	{ CRn( 6), CRm( 0), Op1( 0), Op2( 0), is32,
-			NULL, reset_unknown, c6_DFAR },
+			access_vm_reg, reset_unknown, c6_DFAR },
 	{ CRn( 6), CRm( 0), Op1( 0), Op2( 2), is32,
-			NULL, reset_unknown, c6_IFAR },
+			access_vm_reg, reset_unknown, c6_IFAR },
 
 	/* PAR swapped by interrupt.S */
 	{ CRm64( 7), Op1( 0), is64, NULL, reset_unknown64, c7_PAR },
@@ -324,9 +366,15 @@ static const struct coproc_reg cp15_regs[] = {
 
 	/* PRRR/NMRR (aka MAIR0/MAIR1): swapped by interrupt.S. */
 	{ CRn(10), CRm( 2), Op1( 0), Op2( 0), is32,
-			NULL, reset_unknown, c10_PRRR},
+			access_vm_reg, reset_unknown, c10_PRRR},
 	{ CRn(10), CRm( 2), Op1( 0), Op2( 1), is32,
-			NULL, reset_unknown, c10_NMRR},
+			access_vm_reg, reset_unknown, c10_NMRR},
+
+	/* AMAIR0/AMAIR1: swapped by interrupt.S. */
+	{ CRn(10), CRm( 3), Op1( 0), Op2( 0), is32,
+			access_vm_reg, reset_unknown, c10_AMAIR0},
+	{ CRn(10), CRm( 3), Op1( 0), Op2( 1), is32,
+			access_vm_reg, reset_unknown, c10_AMAIR1},
 
 	/* VBAR: swapped by interrupt.S. */
 	{ CRn(12), CRm( 0), Op1( 0), Op2( 0), is32,
@@ -334,7 +382,7 @@ static const struct coproc_reg cp15_regs[] = {
 
 	/* CONTEXTIDR/TPIDRURW/TPIDRURO/TPIDRPRW: swapped by interrupt.S. */
 	{ CRn(13), CRm( 0), Op1( 0), Op2( 1), is32,
-			NULL, reset_val, c13_CID, 0x00000000 },
+			access_vm_reg, reset_val, c13_CID, 0x00000000 },
 	{ CRn(13), CRm( 0), Op1( 0), Op2( 2), is32,
 			NULL, reset_unknown, c13_TID_URW },
 	{ CRn(13), CRm( 0), Op1( 0), Op2( 3), is32,
@@ -443,7 +491,7 @@ int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	struct coproc_params params;
 
-	params.CRm = (kvm_vcpu_get_hsr(vcpu) >> 1) & 0xf;
+	params.CRn = (kvm_vcpu_get_hsr(vcpu) >> 1) & 0xf;
 	params.Rt1 = (kvm_vcpu_get_hsr(vcpu) >> 5) & 0xf;
 	params.is_write = ((kvm_vcpu_get_hsr(vcpu) & 1) == 0);
 	params.is_64bit = true;
@@ -451,7 +499,7 @@ int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	params.Op1 = (kvm_vcpu_get_hsr(vcpu) >> 16) & 0xf;
 	params.Op2 = 0;
 	params.Rt2 = (kvm_vcpu_get_hsr(vcpu) >> 10) & 0xf;
-	params.CRn = 0;
+	params.CRm = 0;
 
 	return emulate_cp15(vcpu, &params);
 }
diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h
index 0461d5c8d3de..1a44bbe39643 100644
--- a/arch/arm/kvm/coproc.h
+++ b/arch/arm/kvm/coproc.h
@@ -58,8 +58,8 @@ static inline void print_cp_instr(const struct coproc_params *p)
 {
 	/* Look, we even formatted it for you to paste into the table! */
 	if (p->is_64bit) {
-		kvm_pr_unimpl(" { CRm(%2lu), Op1(%2lu), is64, func_%s },\n",
-			      p->CRm, p->Op1, p->is_write ? "write" : "read");
+		kvm_pr_unimpl(" { CRm64(%2lu), Op1(%2lu), is64, func_%s },\n",
+			      p->CRn, p->Op1, p->is_write ? "write" : "read");
 	} else {
 		kvm_pr_unimpl(" { CRn(%2lu), CRm(%2lu), Op1(%2lu), Op2(%2lu), is32,"
 			      " func_%s },\n",
@@ -135,13 +135,13 @@ static inline int cmp_reg(const struct coproc_reg *i1,
 		return -1;
 	if (i1->CRn != i2->CRn)
 		return i1->CRn - i2->CRn;
-	if (i1->is_64 != i2->is_64)
-		return i2->is_64 - i1->is_64;
 	if (i1->CRm != i2->CRm)
 		return i1->CRm - i2->CRm;
 	if (i1->Op1 != i2->Op1)
 		return i1->Op1 - i2->Op1;
-	return i1->Op2 - i2->Op2;
+	if (i1->Op2 != i2->Op2)
+		return i1->Op2 - i2->Op2;
+	return i2->is_64 - i1->is_64;
 }
 
 
@@ -153,4 +153,8 @@ static inline int cmp_reg(const struct coproc_reg *i1,
 #define is64		.is_64 = true
 #define is32		.is_64 = false
 
+bool access_sctlr(struct kvm_vcpu *vcpu,
+		  const struct coproc_params *p,
+		  const struct coproc_reg *r);
+
 #endif /* __ARM_KVM_COPROC_LOCAL_H__ */
diff --git a/arch/arm/kvm/coproc_a15.c b/arch/arm/kvm/coproc_a15.c
index bb0cac1410cc..e6f4ae48bda9 100644
--- a/arch/arm/kvm/coproc_a15.c
+++ b/arch/arm/kvm/coproc_a15.c
@@ -34,7 +34,7 @@
 static const struct coproc_reg a15_regs[] = {
 	/* SCTLR: swapped by interrupt.S. */
 	{ CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32,
-			NULL, reset_val, c1_SCTLR, 0x00C50078 },
+			access_sctlr, reset_val, c1_SCTLR, 0x00C50078 },
 };
 
 static struct kvm_coproc_target_table a15_target_table = {
diff --git a/arch/arm/kvm/coproc_a7.c b/arch/arm/kvm/coproc_a7.c
index 1df767331588..17fc7cd479d3 100644
--- a/arch/arm/kvm/coproc_a7.c
+++ b/arch/arm/kvm/coproc_a7.c
@@ -37,7 +37,7 @@
 static const struct coproc_reg a7_regs[] = {
 	/* SCTLR: swapped by interrupt.S. */
 	{ CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32,
-			NULL, reset_val, c1_SCTLR, 0x00C50878 },
+			access_sctlr, reset_val, c1_SCTLR, 0x00C50878 },
 };
 
 static struct kvm_coproc_target_table a7_target_table = {
diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c
index 2786eae10c0d..b23a59c1c522 100644
--- a/arch/arm/kvm/guest.c
+++ b/arch/arm/kvm/guest.c
@@ -38,6 +38,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 
 int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 {
+	vcpu->arch.hcr = HCR_GUEST_MASK;
 	return 0;
 }
 
diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c
index 0de91fc6de0f..4c979d466cc1 100644
--- a/arch/arm/kvm/handle_exit.c
+++ b/arch/arm/kvm/handle_exit.c
@@ -38,14 +38,18 @@ static int handle_svc_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run)
 
 static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
+	int ret;
+
 	trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0),
 		      kvm_vcpu_hvc_get_imm(vcpu));
 
-	if (kvm_psci_call(vcpu))
+	ret = kvm_psci_call(vcpu);
+	if (ret < 0) {
+		kvm_inject_undefined(vcpu);
 		return 1;
+	}
 
-	kvm_inject_undefined(vcpu);
-	return 1;
+	return ret;
 }
 
 static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run)
diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S
index 6f18695a09cb..76af93025574 100644
--- a/arch/arm/kvm/interrupts_head.S
+++ b/arch/arm/kvm/interrupts_head.S
@@ -303,13 +303,17 @@ vcpu	.req	r0		@ vcpu pointer always in r0
 
 	mrc	p15, 0, r2, c14, c1, 0	@ CNTKCTL
 	mrrc	p15, 0, r4, r5, c7	@ PAR
+	mrc	p15, 0, r6, c10, c3, 0	@ AMAIR0
+	mrc	p15, 0, r7, c10, c3, 1	@ AMAIR1
 
 	.if \store_to_vcpu == 0
-	push	{r2,r4-r5}
+	push	{r2,r4-r7}
 	.else
 	str	r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)]
 	add	r12, vcpu, #CP15_OFFSET(c7_PAR)
 	strd	r4, r5, [r12]
+	str	r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)]
+	str	r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)]
 	.endif
 .endm
 
@@ -322,15 +326,19 @@ vcpu	.req	r0		@ vcpu pointer always in r0
  */
 .macro write_cp15_state read_from_vcpu
 	.if \read_from_vcpu == 0
-	pop	{r2,r4-r5}
+	pop	{r2,r4-r7}
 	.else
 	ldr	r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)]
 	add	r12, vcpu, #CP15_OFFSET(c7_PAR)
 	ldrd	r4, r5, [r12]
+	ldr	r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)]
+	ldr	r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)]
 	.endif
 
 	mcr	p15, 0, r2, c14, c1, 0	@ CNTKCTL
 	mcrr	p15, 0, r4, r5, c7	@ PAR
+	mcr	p15, 0, r6, c10, c3, 0	@ AMAIR0
+	mcr	p15, 0, r7, c10, c3, 1	@ AMAIR1
 
 	.if \read_from_vcpu == 0
 	pop	{r2-r12}
@@ -597,17 +605,14 @@ vcpu	.req	r0		@ vcpu pointer always in r0
 
 /* Enable/Disable: stage-2 trans., trap interrupts, trap wfi, trap smc */
 .macro configure_hyp_role operation
-	mrc	p15, 4, r2, c1, c1, 0	@ HCR
-	bic	r2, r2, #HCR_VIRT_EXCP_MASK
-	ldr	r3, =HCR_GUEST_MASK
 	.if \operation == vmentry
-	orr	r2, r2, r3
+	ldr	r2, [vcpu, #VCPU_HCR]
 	ldr	r3, [vcpu, #VCPU_IRQ_LINES]
 	orr	r2, r2, r3
 	.else
-	bic	r2, r2, r3
+	mov	r2, #0
 	.endif
-	mcr	p15, 4, r2, c1, c1, 0
+	mcr	p15, 4, r2, c1, c1, 0	@ HCR
 .endm
 
 .macro load_vcpu
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index 7789857d1470..16f804938b8f 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -42,6 +42,8 @@ static unsigned long hyp_idmap_start;
 static unsigned long hyp_idmap_end;
 static phys_addr_t hyp_idmap_vector;
 
+#define pgd_order get_order(PTRS_PER_PGD * sizeof(pgd_t))
+
 #define kvm_pmd_huge(_x)	(pmd_huge(_x) || pmd_trans_huge(_x))
 
 static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
@@ -144,8 +146,9 @@ static void unmap_range(struct kvm *kvm, pgd_t *pgdp,
 	while (addr < end) {
 		pgd = pgdp + pgd_index(addr);
 		pud = pud_offset(pgd, addr);
+		pte = NULL;
 		if (pud_none(*pud)) {
-			addr = pud_addr_end(addr, end);
+			addr = kvm_pud_addr_end(addr, end);
 			continue;
 		}
 
@@ -155,13 +158,13 @@ static void unmap_range(struct kvm *kvm, pgd_t *pgdp,
 			 * move on.
 			 */
 			clear_pud_entry(kvm, pud, addr);
-			addr = pud_addr_end(addr, end);
+			addr = kvm_pud_addr_end(addr, end);
 			continue;
 		}
 
 		pmd = pmd_offset(pud, addr);
 		if (pmd_none(*pmd)) {
-			addr = pmd_addr_end(addr, end);
+			addr = kvm_pmd_addr_end(addr, end);
 			continue;
 		}
 
@@ -174,12 +177,12 @@ static void unmap_range(struct kvm *kvm, pgd_t *pgdp,
 		/*
 		 * If the pmd entry is to be cleared, walk back up the ladder
 		 */
-		if (kvm_pmd_huge(*pmd) || page_empty(pte)) {
+		if (kvm_pmd_huge(*pmd) || (pte && page_empty(pte))) {
 			clear_pmd_entry(kvm, pmd, addr);
-			next = pmd_addr_end(addr, end);
+			next = kvm_pmd_addr_end(addr, end);
 			if (page_empty(pmd) && !page_empty(pud)) {
 				clear_pud_entry(kvm, pud, addr);
-				next = pud_addr_end(addr, end);
+				next = kvm_pud_addr_end(addr, end);
 			}
 		}
 
@@ -187,6 +190,99 @@ static void unmap_range(struct kvm *kvm, pgd_t *pgdp,
 	}
 }
 
+static void stage2_flush_ptes(struct kvm *kvm, pmd_t *pmd,
+			      phys_addr_t addr, phys_addr_t end)
+{
+	pte_t *pte;
+
+	pte = pte_offset_kernel(pmd, addr);
+	do {
+		if (!pte_none(*pte)) {
+			hva_t hva = gfn_to_hva(kvm, addr >> PAGE_SHIFT);
+			kvm_flush_dcache_to_poc((void*)hva, PAGE_SIZE);
+		}
+	} while (pte++, addr += PAGE_SIZE, addr != end);
+}
+
+static void stage2_flush_pmds(struct kvm *kvm, pud_t *pud,
+			      phys_addr_t addr, phys_addr_t end)
+{
+	pmd_t *pmd;
+	phys_addr_t next;
+
+	pmd = pmd_offset(pud, addr);
+	do {
+		next = kvm_pmd_addr_end(addr, end);
+		if (!pmd_none(*pmd)) {
+			if (kvm_pmd_huge(*pmd)) {
+				hva_t hva = gfn_to_hva(kvm, addr >> PAGE_SHIFT);
+				kvm_flush_dcache_to_poc((void*)hva, PMD_SIZE);
+			} else {
+				stage2_flush_ptes(kvm, pmd, addr, next);
+			}
+		}
+	} while (pmd++, addr = next, addr != end);
+}
+
+static void stage2_flush_puds(struct kvm *kvm, pgd_t *pgd,
+			      phys_addr_t addr, phys_addr_t end)
+{
+	pud_t *pud;
+	phys_addr_t next;
+
+	pud = pud_offset(pgd, addr);
+	do {
+		next = kvm_pud_addr_end(addr, end);
+		if (!pud_none(*pud)) {
+			if (pud_huge(*pud)) {
+				hva_t hva = gfn_to_hva(kvm, addr >> PAGE_SHIFT);
+				kvm_flush_dcache_to_poc((void*)hva, PUD_SIZE);
+			} else {
+				stage2_flush_pmds(kvm, pud, addr, next);
+			}
+		}
+	} while (pud++, addr = next, addr != end);
+}
+
+static void stage2_flush_memslot(struct kvm *kvm,
+				 struct kvm_memory_slot *memslot)
+{
+	phys_addr_t addr = memslot->base_gfn << PAGE_SHIFT;
+	phys_addr_t end = addr + PAGE_SIZE * memslot->npages;
+	phys_addr_t next;
+	pgd_t *pgd;
+
+	pgd = kvm->arch.pgd + pgd_index(addr);
+	do {
+		next = kvm_pgd_addr_end(addr, end);
+		stage2_flush_puds(kvm, pgd, addr, next);
+	} while (pgd++, addr = next, addr != end);
+}
+
+/**
+ * stage2_flush_vm - Invalidate cache for pages mapped in stage 2
+ * @kvm: The struct kvm pointer
+ *
+ * Go through the stage 2 page tables and invalidate any cache lines
+ * backing memory already mapped to the VM.
+ */
+void stage2_flush_vm(struct kvm *kvm)
+{
+	struct kvm_memslots *slots;
+	struct kvm_memory_slot *memslot;
+	int idx;
+
+	idx = srcu_read_lock(&kvm->srcu);
+	spin_lock(&kvm->mmu_lock);
+
+	slots = kvm_memslots(kvm);
+	kvm_for_each_memslot(memslot, slots)
+		stage2_flush_memslot(kvm, memslot);
+
+	spin_unlock(&kvm->mmu_lock);
+	srcu_read_unlock(&kvm->srcu, idx);
+}
+
 /**
  * free_boot_hyp_pgd - free HYP boot page tables
  *
@@ -199,14 +295,14 @@ void free_boot_hyp_pgd(void)
 	if (boot_hyp_pgd) {
 		unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
 		unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
-		kfree(boot_hyp_pgd);
+		free_pages((unsigned long)boot_hyp_pgd, pgd_order);
 		boot_hyp_pgd = NULL;
 	}
 
 	if (hyp_pgd)
 		unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
 
-	kfree(init_bounce_page);
+	free_page((unsigned long)init_bounce_page);
 	init_bounce_page = NULL;
 
 	mutex_unlock(&kvm_hyp_pgd_mutex);
@@ -236,7 +332,7 @@ void free_hyp_pgds(void)
 		for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE)
 			unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
 
-		kfree(hyp_pgd);
+		free_pages((unsigned long)hyp_pgd, pgd_order);
 		hyp_pgd = NULL;
 	}
 
@@ -715,7 +811,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			kvm_set_s2pmd_writable(&new_pmd);
 			kvm_set_pfn_dirty(pfn);
 		}
-		coherent_icache_guest_page(kvm, hva & PMD_MASK, PMD_SIZE);
+		coherent_cache_guest_page(vcpu, hva & PMD_MASK, PMD_SIZE);
 		ret = stage2_set_pmd_huge(kvm, memcache, fault_ipa, &new_pmd);
 	} else {
 		pte_t new_pte = pfn_pte(pfn, PAGE_S2);
@@ -723,7 +819,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			kvm_set_s2pte_writable(&new_pte);
 			kvm_set_pfn_dirty(pfn);
 		}
-		coherent_icache_guest_page(kvm, hva, PAGE_SIZE);
+		coherent_cache_guest_page(vcpu, hva, PAGE_SIZE);
 		ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, false);
 	}
 
@@ -930,7 +1026,7 @@ int kvm_mmu_init(void)
 		size_t len = __hyp_idmap_text_end - __hyp_idmap_text_start;
 		phys_addr_t phys_base;
 
-		init_bounce_page = kmalloc(PAGE_SIZE, GFP_KERNEL);
+		init_bounce_page = (void *)__get_free_page(GFP_KERNEL);
 		if (!init_bounce_page) {
 			kvm_err("Couldn't allocate HYP init bounce page\n");
 			err = -ENOMEM;
@@ -956,8 +1052,9 @@ int kvm_mmu_init(void)
 			 (unsigned long)phys_base);
 	}
 
-	hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL);
-	boot_hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL);
+	hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order);
+	boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order);
+
 	if (!hyp_pgd || !boot_hyp_pgd) {
 		kvm_err("Hyp mode PGD not allocated\n");
 		err = -ENOMEM;
diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c
index 448f60e8d23c..09cf37737ee2 100644
--- a/arch/arm/kvm/psci.c
+++ b/arch/arm/kvm/psci.c
@@ -27,6 +27,36 @@
  * as described in ARM document number ARM DEN 0022A.
  */
 
+#define AFFINITY_MASK(level)	~((0x1UL << ((level) * MPIDR_LEVEL_BITS)) - 1)
+
+static unsigned long psci_affinity_mask(unsigned long affinity_level)
+{
+	if (affinity_level <= 3)
+		return MPIDR_HWID_BITMASK & AFFINITY_MASK(affinity_level);
+
+	return 0;
+}
+
+static unsigned long kvm_psci_vcpu_suspend(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * NOTE: For simplicity, we make VCPU suspend emulation to be
+	 * same-as WFI (Wait-for-interrupt) emulation.
+	 *
+	 * This means for KVM the wakeup events are interrupts and
+	 * this is consistent with intended use of StateID as described
+	 * in section 5.4.1 of PSCI v0.2 specification (ARM DEN 0022A).
+	 *
+	 * Further, we also treat power-down request to be same as
+	 * stand-by request as-per section 5.4.2 clause 3 of PSCI v0.2
+	 * specification (ARM DEN 0022A). This means all suspend states
+	 * for KVM will preserve the register state.
+	 */
+	kvm_vcpu_block(vcpu);
+
+	return PSCI_RET_SUCCESS;
+}
+
 static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu)
 {
 	vcpu->arch.pause = true;
@@ -38,6 +68,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 	struct kvm_vcpu *vcpu = NULL, *tmp;
 	wait_queue_head_t *wq;
 	unsigned long cpu_id;
+	unsigned long context_id;
 	unsigned long mpidr;
 	phys_addr_t target_pc;
 	int i;
@@ -58,10 +89,17 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 	 * Make sure the caller requested a valid CPU and that the CPU is
 	 * turned off.
 	 */
-	if (!vcpu || !vcpu->arch.pause)
-		return KVM_PSCI_RET_INVAL;
+	if (!vcpu)
+		return PSCI_RET_INVALID_PARAMS;
+	if (!vcpu->arch.pause) {
+		if (kvm_psci_version(source_vcpu) != KVM_ARM_PSCI_0_1)
+			return PSCI_RET_ALREADY_ON;
+		else
+			return PSCI_RET_INVALID_PARAMS;
+	}
 
 	target_pc = *vcpu_reg(source_vcpu, 2);
+	context_id = *vcpu_reg(source_vcpu, 3);
 
 	kvm_reset_vcpu(vcpu);
 
@@ -76,26 +114,160 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 		kvm_vcpu_set_be(vcpu);
 
 	*vcpu_pc(vcpu) = target_pc;
+	/*
+	 * NOTE: We always update r0 (or x0) because for PSCI v0.1
+	 * the general puspose registers are undefined upon CPU_ON.
+	 */
+	*vcpu_reg(vcpu, 0) = context_id;
 	vcpu->arch.pause = false;
 	smp_mb();		/* Make sure the above is visible */
 
 	wq = kvm_arch_vcpu_wq(vcpu);
 	wake_up_interruptible(wq);
 
-	return KVM_PSCI_RET_SUCCESS;
+	return PSCI_RET_SUCCESS;
 }
 
-/**
- * kvm_psci_call - handle PSCI call if r0 value is in range
- * @vcpu: Pointer to the VCPU struct
- *
- * Handle PSCI calls from guests through traps from HVC instructions.
- * The calling convention is similar to SMC calls to the secure world where
- * the function number is placed in r0 and this function returns true if the
- * function number specified in r0 is withing the PSCI range, and false
- * otherwise.
- */
-bool kvm_psci_call(struct kvm_vcpu *vcpu)
+static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
+{
+	int i;
+	unsigned long mpidr;
+	unsigned long target_affinity;
+	unsigned long target_affinity_mask;
+	unsigned long lowest_affinity_level;
+	struct kvm *kvm = vcpu->kvm;
+	struct kvm_vcpu *tmp;
+
+	target_affinity = *vcpu_reg(vcpu, 1);
+	lowest_affinity_level = *vcpu_reg(vcpu, 2);
+
+	/* Determine target affinity mask */
+	target_affinity_mask = psci_affinity_mask(lowest_affinity_level);
+	if (!target_affinity_mask)
+		return PSCI_RET_INVALID_PARAMS;
+
+	/* Ignore other bits of target affinity */
+	target_affinity &= target_affinity_mask;
+
+	/*
+	 * If one or more VCPU matching target affinity are running
+	 * then ON else OFF
+	 */
+	kvm_for_each_vcpu(i, tmp, kvm) {
+		mpidr = kvm_vcpu_get_mpidr(tmp);
+		if (((mpidr & target_affinity_mask) == target_affinity) &&
+		    !tmp->arch.pause) {
+			return PSCI_0_2_AFFINITY_LEVEL_ON;
+		}
+	}
+
+	return PSCI_0_2_AFFINITY_LEVEL_OFF;
+}
+
+static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type)
+{
+	memset(&vcpu->run->system_event, 0, sizeof(vcpu->run->system_event));
+	vcpu->run->system_event.type = type;
+	vcpu->run->exit_reason = KVM_EXIT_SYSTEM_EVENT;
+}
+
+static void kvm_psci_system_off(struct kvm_vcpu *vcpu)
+{
+	kvm_prepare_system_event(vcpu, KVM_SYSTEM_EVENT_SHUTDOWN);
+}
+
+static void kvm_psci_system_reset(struct kvm_vcpu *vcpu)
+{
+	kvm_prepare_system_event(vcpu, KVM_SYSTEM_EVENT_RESET);
+}
+
+int kvm_psci_version(struct kvm_vcpu *vcpu)
+{
+	if (test_bit(KVM_ARM_VCPU_PSCI_0_2, vcpu->arch.features))
+		return KVM_ARM_PSCI_0_2;
+
+	return KVM_ARM_PSCI_0_1;
+}
+
+static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
+{
+	int ret = 1;
+	unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0);
+	unsigned long val;
+
+	switch (psci_fn) {
+	case PSCI_0_2_FN_PSCI_VERSION:
+		/*
+		 * Bits[31:16] = Major Version = 0
+		 * Bits[15:0] = Minor Version = 2
+		 */
+		val = 2;
+		break;
+	case PSCI_0_2_FN_CPU_SUSPEND:
+	case PSCI_0_2_FN64_CPU_SUSPEND:
+		val = kvm_psci_vcpu_suspend(vcpu);
+		break;
+	case PSCI_0_2_FN_CPU_OFF:
+		kvm_psci_vcpu_off(vcpu);
+		val = PSCI_RET_SUCCESS;
+		break;
+	case PSCI_0_2_FN_CPU_ON:
+	case PSCI_0_2_FN64_CPU_ON:
+		val = kvm_psci_vcpu_on(vcpu);
+		break;
+	case PSCI_0_2_FN_AFFINITY_INFO:
+	case PSCI_0_2_FN64_AFFINITY_INFO:
+		val = kvm_psci_vcpu_affinity_info(vcpu);
+		break;
+	case PSCI_0_2_FN_MIGRATE:
+	case PSCI_0_2_FN64_MIGRATE:
+		val = PSCI_RET_NOT_SUPPORTED;
+		break;
+	case PSCI_0_2_FN_MIGRATE_INFO_TYPE:
+		/*
+		 * Trusted OS is MP hence does not require migration
+	         * or
+		 * Trusted OS is not present
+		 */
+		val = PSCI_0_2_TOS_MP;
+		break;
+	case PSCI_0_2_FN_MIGRATE_INFO_UP_CPU:
+	case PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU:
+		val = PSCI_RET_NOT_SUPPORTED;
+		break;
+	case PSCI_0_2_FN_SYSTEM_OFF:
+		kvm_psci_system_off(vcpu);
+		/*
+		 * We should'nt be going back to guest VCPU after
+		 * receiving SYSTEM_OFF request.
+		 *
+		 * If user space accidently/deliberately resumes
+		 * guest VCPU after SYSTEM_OFF request then guest
+		 * VCPU should see internal failure from PSCI return
+		 * value. To achieve this, we preload r0 (or x0) with
+		 * PSCI return value INTERNAL_FAILURE.
+		 */
+		val = PSCI_RET_INTERNAL_FAILURE;
+		ret = 0;
+		break;
+	case PSCI_0_2_FN_SYSTEM_RESET:
+		kvm_psci_system_reset(vcpu);
+		/*
+		 * Same reason as SYSTEM_OFF for preloading r0 (or x0)
+		 * with PSCI return value INTERNAL_FAILURE.
+		 */
+		val = PSCI_RET_INTERNAL_FAILURE;
+		ret = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	*vcpu_reg(vcpu, 0) = val;
+	return ret;
+}
+
+static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
 {
 	unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0);
 	unsigned long val;
@@ -103,20 +275,45 @@ bool kvm_psci_call(struct kvm_vcpu *vcpu)
 	switch (psci_fn) {
 	case KVM_PSCI_FN_CPU_OFF:
 		kvm_psci_vcpu_off(vcpu);
-		val = KVM_PSCI_RET_SUCCESS;
+		val = PSCI_RET_SUCCESS;
 		break;
 	case KVM_PSCI_FN_CPU_ON:
 		val = kvm_psci_vcpu_on(vcpu);
 		break;
 	case KVM_PSCI_FN_CPU_SUSPEND:
 	case KVM_PSCI_FN_MIGRATE:
-		val = KVM_PSCI_RET_NI;
+		val = PSCI_RET_NOT_SUPPORTED;
 		break;
-
 	default:
-		return false;
+		return -EINVAL;
 	}
 
 	*vcpu_reg(vcpu, 0) = val;
-	return true;
+	return 1;
+}
+
+/**
+ * kvm_psci_call - handle PSCI call if r0 value is in range
+ * @vcpu: Pointer to the VCPU struct
+ *
+ * Handle PSCI calls from guests through traps from HVC instructions.
+ * The calling convention is similar to SMC calls to the secure world
+ * where the function number is placed in r0.
+ *
+ * This function returns: > 0 (success), 0 (success but exit to user
+ * space), and < 0 (errors)
+ *
+ * Errors:
+ * -EINVAL: Unrecognized PSCI function
+ */
+int kvm_psci_call(struct kvm_vcpu *vcpu)
+{
+	switch (kvm_psci_version(vcpu)) {
+	case KVM_ARM_PSCI_0_2:
+		return kvm_psci_0_2_call(vcpu);
+	case KVM_ARM_PSCI_0_1:
+		return kvm_psci_0_1_call(vcpu);
+	default:
+		return -EINVAL;
+	};
 }
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 52886b89706c..9f12ed1eea86 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -37,6 +37,11 @@ UNWIND(	.fnstart	)
 	add	r1, r1, r0, lsl #2	@ Get word offset
 	mov	r3, r2, lsl r3		@ create mask
 	smp_dmb
+#if __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
+	.arch_extension	mp
+	ALT_SMP(W(pldw)	[r1])
+	ALT_UP(W(nop))
+#endif
 1:	ldrex	r2, [r1]
 	ands	r0, r2, r3		@ save old value of bit
 	\instr	r2, r2, r3		@ toggle bit
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index 805e3f8fb007..3bc8eb811a73 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -197,24 +197,24 @@
 
 12:	PLD(	pld	[r1, #124]		)
 13:		ldr4w	r1, r4, r5, r6, r7, abort=19f
-		mov	r3, lr, pull #\pull
+		mov	r3, lr, lspull #\pull
 		subs	r2, r2, #32
 		ldr4w	r1, r8, r9, ip, lr, abort=19f
-		orr	r3, r3, r4, push #\push
-		mov	r4, r4, pull #\pull
-		orr	r4, r4, r5, push #\push
-		mov	r5, r5, pull #\pull
-		orr	r5, r5, r6, push #\push
-		mov	r6, r6, pull #\pull
-		orr	r6, r6, r7, push #\push
-		mov	r7, r7, pull #\pull
-		orr	r7, r7, r8, push #\push
-		mov	r8, r8, pull #\pull
-		orr	r8, r8, r9, push #\push
-		mov	r9, r9, pull #\pull
-		orr	r9, r9, ip, push #\push
-		mov	ip, ip, pull #\pull
-		orr	ip, ip, lr, push #\push
+		orr	r3, r3, r4, lspush #\push
+		mov	r4, r4, lspull #\pull
+		orr	r4, r4, r5, lspush #\push
+		mov	r5, r5, lspull #\pull
+		orr	r5, r5, r6, lspush #\push
+		mov	r6, r6, lspull #\pull
+		orr	r6, r6, r7, lspush #\push
+		mov	r7, r7, lspull #\pull
+		orr	r7, r7, r8, lspush #\push
+		mov	r8, r8, lspull #\pull
+		orr	r8, r8, r9, lspush #\push
+		mov	r9, r9, lspull #\pull
+		orr	r9, r9, ip, lspush #\push
+		mov	ip, ip, lspull #\pull
+		orr	ip, ip, lr, lspush #\push
 		str8w	r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f
 		bge	12b
 	PLD(	cmn	r2, #96			)
@@ -225,10 +225,10 @@
 14:		ands	ip, r2, #28
 		beq	16f
 
-15:		mov	r3, lr, pull #\pull
+15:		mov	r3, lr, lspull #\pull
 		ldr1w	r1, lr, abort=21f
 		subs	ip, ip, #4
-		orr	r3, r3, lr, push #\push
+		orr	r3, r3, lr, lspush #\push
 		str1w	r0, r3, abort=21f
 		bgt	15b
 	CALGN(	cmp	r2, #0			)
diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S
index d620a5f22a09..d6e742d24007 100644
--- a/arch/arm/lib/csumpartialcopygeneric.S
+++ b/arch/arm/lib/csumpartialcopygeneric.S
@@ -141,7 +141,7 @@ FN_ENTRY
 		tst	len, #2
 		mov	r5, r4, get_byte_0
 		beq	.Lexit
-		adcs	sum, sum, r4, push #16
+		adcs	sum, sum, r4, lspush #16
 		strb	r5, [dst], #1
 		mov	r5, r4, get_byte_1
 		strb	r5, [dst], #1
@@ -171,23 +171,23 @@ FN_ENTRY
 		cmp	ip, #2
 		beq	.Lsrc2_aligned
 		bhi	.Lsrc3_aligned
-		mov	r4, r5, pull #8		@ C = 0
+		mov	r4, r5, lspull #8		@ C = 0
 		bics	ip, len, #15
 		beq	2f
 1:		load4l	r5, r6, r7, r8
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
-		mov	r6, r6, pull #8
-		orr	r6, r6, r7, push #24
-		mov	r7, r7, pull #8
-		orr	r7, r7, r8, push #24
+		orr	r4, r4, r5, lspush #24
+		mov	r5, r5, lspull #8
+		orr	r5, r5, r6, lspush #24
+		mov	r6, r6, lspull #8
+		orr	r6, r6, r7, lspush #24
+		mov	r7, r7, lspull #8
+		orr	r7, r7, r8, lspush #24
 		stmia	dst!, {r4, r5, r6, r7}
 		adcs	sum, sum, r4
 		adcs	sum, sum, r5
 		adcs	sum, sum, r6
 		adcs	sum, sum, r7
-		mov	r4, r8, pull #8
+		mov	r4, r8, lspull #8
 		sub	ip, ip, #16
 		teq	ip, #0
 		bne	1b
@@ -196,50 +196,50 @@ FN_ENTRY
 		tst	ip, #8
 		beq	3f
 		load2l	r5, r6
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
+		orr	r4, r4, r5, lspush #24
+		mov	r5, r5, lspull #8
+		orr	r5, r5, r6, lspush #24
 		stmia	dst!, {r4, r5}
 		adcs	sum, sum, r4
 		adcs	sum, sum, r5
-		mov	r4, r6, pull #8
+		mov	r4, r6, lspull #8
 		tst	ip, #4
 		beq	4f
 3:		load1l	r5
-		orr	r4, r4, r5, push #24
+		orr	r4, r4, r5, lspush #24
 		str	r4, [dst], #4
 		adcs	sum, sum, r4
-		mov	r4, r5, pull #8
+		mov	r4, r5, lspull #8
 4:		ands	len, len, #3
 		beq	.Ldone
 		mov	r5, r4, get_byte_0
 		tst	len, #2
 		beq	.Lexit
-		adcs	sum, sum, r4, push #16
+		adcs	sum, sum, r4, lspush #16
 		strb	r5, [dst], #1
 		mov	r5, r4, get_byte_1
 		strb	r5, [dst], #1
 		mov	r5, r4, get_byte_2
 		b	.Lexit
 
-.Lsrc2_aligned:	mov	r4, r5, pull #16
+.Lsrc2_aligned:	mov	r4, r5, lspull #16
 		adds	sum, sum, #0
 		bics	ip, len, #15
 		beq	2f
 1:		load4l	r5, r6, r7, r8
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
-		mov	r6, r6, pull #16
-		orr	r6, r6, r7, push #16
-		mov	r7, r7, pull #16
-		orr	r7, r7, r8, push #16
+		orr	r4, r4, r5, lspush #16
+		mov	r5, r5, lspull #16
+		orr	r5, r5, r6, lspush #16
+		mov	r6, r6, lspull #16
+		orr	r6, r6, r7, lspush #16
+		mov	r7, r7, lspull #16
+		orr	r7, r7, r8, lspush #16
 		stmia	dst!, {r4, r5, r6, r7}
 		adcs	sum, sum, r4
 		adcs	sum, sum, r5
 		adcs	sum, sum, r6
 		adcs	sum, sum, r7
-		mov	r4, r8, pull #16
+		mov	r4, r8, lspull #16
 		sub	ip, ip, #16
 		teq	ip, #0
 		bne	1b
@@ -248,20 +248,20 @@ FN_ENTRY
 		tst	ip, #8
 		beq	3f
 		load2l	r5, r6
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
+		orr	r4, r4, r5, lspush #16
+		mov	r5, r5, lspull #16
+		orr	r5, r5, r6, lspush #16
 		stmia	dst!, {r4, r5}
 		adcs	sum, sum, r4
 		adcs	sum, sum, r5
-		mov	r4, r6, pull #16
+		mov	r4, r6, lspull #16
 		tst	ip, #4
 		beq	4f
 3:		load1l	r5
-		orr	r4, r4, r5, push #16
+		orr	r4, r4, r5, lspush #16
 		str	r4, [dst], #4
 		adcs	sum, sum, r4
-		mov	r4, r5, pull #16
+		mov	r4, r5, lspull #16
 4:		ands	len, len, #3
 		beq	.Ldone
 		mov	r5, r4, get_byte_0
@@ -276,24 +276,24 @@ FN_ENTRY
 		load1b	r5
 		b	.Lexit
 
-.Lsrc3_aligned:	mov	r4, r5, pull #24
+.Lsrc3_aligned:	mov	r4, r5, lspull #24
 		adds	sum, sum, #0
 		bics	ip, len, #15
 		beq	2f
 1:		load4l	r5, r6, r7, r8
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
-		mov	r6, r6, pull #24
-		orr	r6, r6, r7, push #8
-		mov	r7, r7, pull #24
-		orr	r7, r7, r8, push #8
+		orr	r4, r4, r5, lspush #8
+		mov	r5, r5, lspull #24
+		orr	r5, r5, r6, lspush #8
+		mov	r6, r6, lspull #24
+		orr	r6, r6, r7, lspush #8
+		mov	r7, r7, lspull #24
+		orr	r7, r7, r8, lspush #8
 		stmia	dst!, {r4, r5, r6, r7}
 		adcs	sum, sum, r4
 		adcs	sum, sum, r5
 		adcs	sum, sum, r6
 		adcs	sum, sum, r7
-		mov	r4, r8, pull #24
+		mov	r4, r8, lspull #24
 		sub	ip, ip, #16
 		teq	ip, #0
 		bne	1b
@@ -302,20 +302,20 @@ FN_ENTRY
 		tst	ip, #8
 		beq	3f
 		load2l	r5, r6
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
+		orr	r4, r4, r5, lspush #8
+		mov	r5, r5, lspull #24
+		orr	r5, r5, r6, lspush #8
 		stmia	dst!, {r4, r5}
 		adcs	sum, sum, r4
 		adcs	sum, sum, r5
-		mov	r4, r6, pull #24
+		mov	r4, r6, lspull #24
 		tst	ip, #4
 		beq	4f
 3:		load1l	r5
-		orr	r4, r4, r5, push #8
+		orr	r4, r4, r5, lspush #8
 		str	r4, [dst], #4
 		adcs	sum, sum, r4
-		mov	r4, r5, pull #24
+		mov	r4, r5, lspull #24
 4:		ands	len, len, #3
 		beq	.Ldone
 		mov	r5, r4, get_byte_0
@@ -326,7 +326,7 @@ FN_ENTRY
 		load1l	r4
 		mov	r5, r4, get_byte_0
 		strb	r5, [dst], #1
-		adcs	sum, sum, r4, push #24
+		adcs	sum, sum, r4, lspush #24
 		mov	r5, r4, get_byte_1
 		b	.Lexit
 FN_EXIT
diff --git a/arch/arm/lib/io-readsl.S b/arch/arm/lib/io-readsl.S
index 5fb97e7f9f4b..7a7430950c79 100644
--- a/arch/arm/lib/io-readsl.S
+++ b/arch/arm/lib/io-readsl.S
@@ -47,25 +47,25 @@ ENTRY(__raw_readsl)
 		strb	ip, [r1], #1
 
 4:		subs	r2, r2, #1
-		mov	ip, r3, pull #24
+		mov	ip, r3, lspull #24
 		ldrne	r3, [r0]
-		orrne	ip, ip, r3, push #8
+		orrne	ip, ip, r3, lspush #8
 		strne	ip, [r1], #4
 		bne	4b
 		b	8f
 
 5:		subs	r2, r2, #1
-		mov	ip, r3, pull #16
+		mov	ip, r3, lspull #16
 		ldrne	r3, [r0]
-		orrne	ip, ip, r3, push #16
+		orrne	ip, ip, r3, lspush #16
 		strne	ip, [r1], #4
 		bne	5b
 		b	7f
 
 6:		subs	r2, r2, #1
-		mov	ip, r3, pull #8
+		mov	ip, r3, lspull #8
 		ldrne	r3, [r0]
-		orrne	ip, ip, r3, push #24
+		orrne	ip, ip, r3, lspush #24
 		strne	ip, [r1], #4
 		bne	6b
 
diff --git a/arch/arm/lib/io-writesl.S b/arch/arm/lib/io-writesl.S
index 8d3b7813725c..d0d104a0dd11 100644
--- a/arch/arm/lib/io-writesl.S
+++ b/arch/arm/lib/io-writesl.S
@@ -41,26 +41,26 @@ ENTRY(__raw_writesl)
 		blt	5f
 		bgt	6f
 
-4:		mov	ip, r3, pull #16
+4:		mov	ip, r3, lspull #16
 		ldr	r3, [r1], #4
 		subs	r2, r2, #1
-		orr	ip, ip, r3, push #16
+		orr	ip, ip, r3, lspush #16
 		str	ip, [r0]
 		bne	4b
 		mov	pc, lr
 
-5:		mov	ip, r3, pull #8
+5:		mov	ip, r3, lspull #8
 		ldr	r3, [r1], #4
 		subs	r2, r2, #1
-		orr	ip, ip, r3, push #24
+		orr	ip, ip, r3, lspush #24
 		str	ip, [r0]
 		bne	5b
 		mov	pc, lr
 
-6:		mov	ip, r3, pull #24
+6:		mov	ip, r3, lspull #24
 		ldr	r3, [r1], #4
 		subs	r2, r2, #1
-		orr	ip, ip, r3, push #8
+		orr	ip, ip, r3, lspush #8
 		str	ip, [r0]
 		bne	6b
 		mov	pc, lr
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 938fc14f962d..d1fc0c0c342c 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -147,24 +147,24 @@ ENTRY(memmove)
 
 12:	PLD(	pld	[r1, #-128]		)
 13:		ldmdb   r1!, {r7, r8, r9, ip}
-		mov     lr, r3, push #\push
+		mov     lr, r3, lspush #\push
 		subs    r2, r2, #32
 		ldmdb   r1!, {r3, r4, r5, r6}
-		orr     lr, lr, ip, pull #\pull
-		mov     ip, ip, push #\push
-		orr     ip, ip, r9, pull #\pull
-		mov     r9, r9, push #\push
-		orr     r9, r9, r8, pull #\pull
-		mov     r8, r8, push #\push
-		orr     r8, r8, r7, pull #\pull
-		mov     r7, r7, push #\push
-		orr     r7, r7, r6, pull #\pull
-		mov     r6, r6, push #\push
-		orr     r6, r6, r5, pull #\pull
-		mov     r5, r5, push #\push
-		orr     r5, r5, r4, pull #\pull
-		mov     r4, r4, push #\push
-		orr     r4, r4, r3, pull #\pull
+		orr     lr, lr, ip, lspull #\pull
+		mov     ip, ip, lspush #\push
+		orr     ip, ip, r9, lspull #\pull
+		mov     r9, r9, lspush #\push
+		orr     r9, r9, r8, lspull #\pull
+		mov     r8, r8, lspush #\push
+		orr     r8, r8, r7, lspull #\pull
+		mov     r7, r7, lspush #\push
+		orr     r7, r7, r6, lspull #\pull
+		mov     r6, r6, lspush #\push
+		orr     r6, r6, r5, lspull #\pull
+		mov     r5, r5, lspush #\push
+		orr     r5, r5, r4, lspull #\pull
+		mov     r4, r4, lspush #\push
+		orr     r4, r4, r3, lspull #\pull
 		stmdb   r0!, {r4 - r9, ip, lr}
 		bge	12b
 	PLD(	cmn	r2, #96			)
@@ -175,10 +175,10 @@ ENTRY(memmove)
 14:		ands	ip, r2, #28
 		beq	16f
 
-15:		mov     lr, r3, push #\push
+15:		mov     lr, r3, lspush #\push
 		ldr	r3, [r1, #-4]!
 		subs	ip, ip, #4
-		orr	lr, lr, r3, pull #\pull
+		orr	lr, lr, r3, lspull #\pull
 		str	lr, [r0, #-4]!
 		bgt	15b
 	CALGN(	cmp	r2, #0			)
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index 5c908b1cb8ed..e50520904b76 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -117,9 +117,9 @@ USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 .Lc2u_1fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
 		bmi	.Lc2u_1nowords
-		mov	r3, r7, pull #8
+		mov	r3, r7, lspull #8
 		ldr	r7, [r1], #4
-		orr	r3, r3, r7, push #24
+		orr	r3, r3, r7, lspush #24
 USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
@@ -131,30 +131,30 @@ USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		subs	ip, ip, #16
 		blt	.Lc2u_1rem8lp
 
-.Lc2u_1cpy8lp:	mov	r3, r7, pull #8
+.Lc2u_1cpy8lp:	mov	r3, r7, lspull #8
 		ldmia	r1!, {r4 - r7}
 		subs	ip, ip, #16
-		orr	r3, r3, r4, push #24
-		mov	r4, r4, pull #8
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
-		mov	r6, r6, pull #8
-		orr	r6, r6, r7, push #24
+		orr	r3, r3, r4, lspush #24
+		mov	r4, r4, lspull #8
+		orr	r4, r4, r5, lspush #24
+		mov	r5, r5, lspull #8
+		orr	r5, r5, r6, lspush #24
+		mov	r6, r6, lspull #8
+		orr	r6, r6, r7, lspush #24
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
 		bpl	.Lc2u_1cpy8lp
 
 .Lc2u_1rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #8
+		movne	r3, r7, lspull #8
 		ldmneia	r1!, {r4, r7}
-		orrne	r3, r3, r4, push #24
-		movne	r4, r4, pull #8
-		orrne	r4, r4, r7, push #24
+		orrne	r3, r3, r4, lspush #24
+		movne	r4, r4, lspull #8
+		orrne	r4, r4, r7, lspush #24
 		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
 		tst	ip, #4
-		movne	r3, r7, pull #8
+		movne	r3, r7, lspull #8
 		ldrne	r7, [r1], #4
-		orrne	r3, r3, r7, push #24
+		orrne	r3, r3, r7, lspush #24
 	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_1fupi
@@ -172,9 +172,9 @@ USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 .Lc2u_2fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
 		bmi	.Lc2u_2nowords
-		mov	r3, r7, pull #16
+		mov	r3, r7, lspull #16
 		ldr	r7, [r1], #4
-		orr	r3, r3, r7, push #16
+		orr	r3, r3, r7, lspush #16
 USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
@@ -186,30 +186,30 @@ USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		subs	ip, ip, #16
 		blt	.Lc2u_2rem8lp
 
-.Lc2u_2cpy8lp:	mov	r3, r7, pull #16
+.Lc2u_2cpy8lp:	mov	r3, r7, lspull #16
 		ldmia	r1!, {r4 - r7}
 		subs	ip, ip, #16
-		orr	r3, r3, r4, push #16
-		mov	r4, r4, pull #16
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
-		mov	r6, r6, pull #16
-		orr	r6, r6, r7, push #16
+		orr	r3, r3, r4, lspush #16
+		mov	r4, r4, lspull #16
+		orr	r4, r4, r5, lspush #16
+		mov	r5, r5, lspull #16
+		orr	r5, r5, r6, lspush #16
+		mov	r6, r6, lspull #16
+		orr	r6, r6, r7, lspush #16
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
 		bpl	.Lc2u_2cpy8lp
 
 .Lc2u_2rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #16
+		movne	r3, r7, lspull #16
 		ldmneia	r1!, {r4, r7}
-		orrne	r3, r3, r4, push #16
-		movne	r4, r4, pull #16
-		orrne	r4, r4, r7, push #16
+		orrne	r3, r3, r4, lspush #16
+		movne	r4, r4, lspull #16
+		orrne	r4, r4, r7, lspush #16
 		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
 		tst	ip, #4
-		movne	r3, r7, pull #16
+		movne	r3, r7, lspull #16
 		ldrne	r7, [r1], #4
-		orrne	r3, r3, r7, push #16
+		orrne	r3, r3, r7, lspush #16
 	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_2fupi
@@ -227,9 +227,9 @@ USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 .Lc2u_3fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
 		bmi	.Lc2u_3nowords
-		mov	r3, r7, pull #24
+		mov	r3, r7, lspull #24
 		ldr	r7, [r1], #4
-		orr	r3, r3, r7, push #8
+		orr	r3, r3, r7, lspush #8
 USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
@@ -241,30 +241,30 @@ USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		subs	ip, ip, #16
 		blt	.Lc2u_3rem8lp
 
-.Lc2u_3cpy8lp:	mov	r3, r7, pull #24
+.Lc2u_3cpy8lp:	mov	r3, r7, lspull #24
 		ldmia	r1!, {r4 - r7}
 		subs	ip, ip, #16
-		orr	r3, r3, r4, push #8
-		mov	r4, r4, pull #24
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
-		mov	r6, r6, pull #24
-		orr	r6, r6, r7, push #8
+		orr	r3, r3, r4, lspush #8
+		mov	r4, r4, lspull #24
+		orr	r4, r4, r5, lspush #8
+		mov	r5, r5, lspull #24
+		orr	r5, r5, r6, lspush #8
+		mov	r6, r6, lspull #24
+		orr	r6, r6, r7, lspush #8
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
 		bpl	.Lc2u_3cpy8lp
 
 .Lc2u_3rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #24
+		movne	r3, r7, lspull #24
 		ldmneia	r1!, {r4, r7}
-		orrne	r3, r3, r4, push #8
-		movne	r4, r4, pull #24
-		orrne	r4, r4, r7, push #8
+		orrne	r3, r3, r4, lspush #8
+		movne	r4, r4, lspull #24
+		orrne	r4, r4, r7, lspush #8
 		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
 		tst	ip, #4
-		movne	r3, r7, pull #24
+		movne	r3, r7, lspull #24
 		ldrne	r7, [r1], #4
-		orrne	r3, r3, r7, push #8
+		orrne	r3, r3, r7, lspush #8
 	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_3fupi
@@ -382,9 +382,9 @@ USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 .Lcfu_1fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
 		bmi	.Lcfu_1nowords
-		mov	r3, r7, pull #8
+		mov	r3, r7, lspull #8
 USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		orr	r3, r3, r7, push #24
+		orr	r3, r3, r7, lspush #24
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
@@ -396,30 +396,30 @@ USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		subs	ip, ip, #16
 		blt	.Lcfu_1rem8lp
 
-.Lcfu_1cpy8lp:	mov	r3, r7, pull #8
+.Lcfu_1cpy8lp:	mov	r3, r7, lspull #8
 		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
 		subs	ip, ip, #16
-		orr	r3, r3, r4, push #24
-		mov	r4, r4, pull #8
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
-		mov	r6, r6, pull #8
-		orr	r6, r6, r7, push #24
+		orr	r3, r3, r4, lspush #24
+		mov	r4, r4, lspull #8
+		orr	r4, r4, r5, lspush #24
+		mov	r5, r5, lspull #8
+		orr	r5, r5, r6, lspush #24
+		mov	r6, r6, lspull #8
+		orr	r6, r6, r7, lspush #24
 		stmia	r0!, {r3 - r6}
 		bpl	.Lcfu_1cpy8lp
 
 .Lcfu_1rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #8
+		movne	r3, r7, lspull #8
 		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
-		orrne	r3, r3, r4, push #24
-		movne	r4, r4, pull #8
-		orrne	r4, r4, r7, push #24
+		orrne	r3, r3, r4, lspush #24
+		movne	r4, r4, lspull #8
+		orrne	r4, r4, r7, lspush #24
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
-		movne	r3, r7, pull #8
+		movne	r3, r7, lspull #8
 USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
-		orrne	r3, r3, r7, push #24
+		orrne	r3, r3, r7, lspush #24
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
 		beq	.Lcfu_1fupi
@@ -437,9 +437,9 @@ USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
 .Lcfu_2fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
 		bmi	.Lcfu_2nowords
-		mov	r3, r7, pull #16
+		mov	r3, r7, lspull #16
 USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		orr	r3, r3, r7, push #16
+		orr	r3, r3, r7, lspush #16
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
@@ -452,30 +452,30 @@ USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		blt	.Lcfu_2rem8lp
 
 
-.Lcfu_2cpy8lp:	mov	r3, r7, pull #16
+.Lcfu_2cpy8lp:	mov	r3, r7, lspull #16
 		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
 		subs	ip, ip, #16
-		orr	r3, r3, r4, push #16
-		mov	r4, r4, pull #16
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
-		mov	r6, r6, pull #16
-		orr	r6, r6, r7, push #16
+		orr	r3, r3, r4, lspush #16
+		mov	r4, r4, lspull #16
+		orr	r4, r4, r5, lspush #16
+		mov	r5, r5, lspull #16
+		orr	r5, r5, r6, lspush #16
+		mov	r6, r6, lspull #16
+		orr	r6, r6, r7, lspush #16
 		stmia	r0!, {r3 - r6}
 		bpl	.Lcfu_2cpy8lp
 
 .Lcfu_2rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #16
+		movne	r3, r7, lspull #16
 		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
-		orrne	r3, r3, r4, push #16
-		movne	r4, r4, pull #16
-		orrne	r4, r4, r7, push #16
+		orrne	r3, r3, r4, lspush #16
+		movne	r4, r4, lspull #16
+		orrne	r4, r4, r7, lspush #16
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
-		movne	r3, r7, pull #16
+		movne	r3, r7, lspull #16
 USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
-		orrne	r3, r3, r7, push #16
+		orrne	r3, r3, r7, lspush #16
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
 		beq	.Lcfu_2fupi
@@ -493,9 +493,9 @@ USER(	TUSER(	ldrgtb) r3, [r1], #0)			@ May fault
 .Lcfu_3fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
 		bmi	.Lcfu_3nowords
-		mov	r3, r7, pull #24
+		mov	r3, r7, lspull #24
 USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		orr	r3, r3, r7, push #8
+		orr	r3, r3, r7, lspush #8
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
@@ -507,30 +507,30 @@ USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		subs	ip, ip, #16
 		blt	.Lcfu_3rem8lp
 
-.Lcfu_3cpy8lp:	mov	r3, r7, pull #24
+.Lcfu_3cpy8lp:	mov	r3, r7, lspull #24
 		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
-		orr	r3, r3, r4, push #8
-		mov	r4, r4, pull #24
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
-		mov	r6, r6, pull #24
-		orr	r6, r6, r7, push #8
+		orr	r3, r3, r4, lspush #8
+		mov	r4, r4, lspull #24
+		orr	r4, r4, r5, lspush #8
+		mov	r5, r5, lspull #24
+		orr	r5, r5, r6, lspush #8
+		mov	r6, r6, lspull #24
+		orr	r6, r6, r7, lspush #8
 		stmia	r0!, {r3 - r6}
 		subs	ip, ip, #16
 		bpl	.Lcfu_3cpy8lp
 
 .Lcfu_3rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #24
+		movne	r3, r7, lspull #24
 		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
-		orrne	r3, r3, r4, push #8
-		movne	r4, r4, pull #24
-		orrne	r4, r4, r7, push #8
+		orrne	r3, r3, r4, lspush #8
+		movne	r4, r4, lspull #24
+		orrne	r4, r4, r7, lspush #8
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
-		movne	r3, r7, pull #24
+		movne	r3, r7, lspull #24
 USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
-		orrne	r3, r3, r7, push #8
+		orrne	r3, r3, r7, lspush #8
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
 		beq	.Lcfu_3fupi
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 4f0e800e7e71..45b55e0f0db6 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -57,6 +57,7 @@ config SOC_SAMA5
 	select GENERIC_CLOCKEVENTS
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
+	select USE_OF
 
 menu "Atmel AT91 System-on-Chip"
 
@@ -64,11 +65,22 @@ choice
 
 	prompt "Core type"
 
+config ARCH_AT91X40
+	bool "ARM7 AT91X40"
+	depends on !MMU
+	select CPU_ARM7TDMI
+	select ARCH_USES_GETTIMEOFFSET
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+
+	help
+	  Select this if you are using one of Atmel's AT91X40 SoC.
+
 config SOC_SAM_V4_V5
-	bool "ARM7/ARM9"
+	bool "ARM9 AT91SAM9/AT91RM9200"
 	help
-	  Select this if you are using one of Atmel's AT91SAM9, AT91RM9200
-	  or AT91X40 SoC.
+	  Select this if you are using one of Atmel's AT91SAM9 or
+	  AT91RM9200 SoC.
 
 config SOC_SAM_V7
 	bool "Cortex A5"
@@ -119,7 +131,6 @@ config SOC_AT91SAM9261
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
 	select SOC_AT91SAM9
-	select AT91_USE_OLD_CLK
 	select HAVE_AT91_USB_CLK
 	help
 	  Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
@@ -137,7 +148,6 @@ config SOC_AT91SAM9RL
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
 	select SOC_AT91SAM9
-	select AT91_USE_OLD_CLK
 	select HAVE_AT91_UTMI
 
 config SOC_AT91SAM9G45
@@ -157,7 +167,6 @@ config SOC_AT91SAM9X5
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
 	select SOC_AT91SAM9
-	select AT91_USE_OLD_CLK
 	select HAVE_AT91_UTMI
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
@@ -173,15 +182,17 @@ config SOC_AT91SAM9N12
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
 	select SOC_AT91SAM9
-	select AT91_USE_OLD_CLK
 	select HAVE_AT91_USB_CLK
 	help
 	  Select this if you are using Atmel's AT91SAM9N12 SoC.
 
 # ----------------------------------------------------------
+endif # SOC_SAM_V4_V5
 
+
+if SOC_SAM_V4_V5 || ARCH_AT91X40
 source arch/arm/mach-at91/Kconfig.non_dt
-endif # SOC_SAM_V4_V5
+endif
 
 comment "Generic Board Type"
 
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 1f73e9b527da..44ace320d2e1 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -5,6 +5,7 @@ config HAVE_AT91_DATAFLASH_CARD
 
 choice
 	prompt "Atmel AT91 Processor Devices for non DT boards"
+	depends on !ARCH_AT91X40
 
 config ARCH_AT91_NONE
 	bool "None"
@@ -39,13 +40,6 @@ config ARCH_AT91SAM9G45
 	select SOC_AT91SAM9G45
 	select AT91_USE_OLD_CLK
 
-config ARCH_AT91X40
-	bool "AT91x40"
-	depends on !MMU
-	select ARCH_USES_GETTIMEOFFSET
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-
 endchoice
 
 config ARCH_AT91SAM9G20
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index e47f5fd232f5..787bb50a4dff 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -21,6 +21,7 @@
 #include <mach/at91rm9200.h>
 #include <mach/at91_st.h>
 #include <mach/cpu.h>
+#include <mach/hardware.h>
 
 #include "at91_aic.h"
 #include "soc.h"
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 3ebc9792560c..3f4bb58aea54 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -15,15 +15,18 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
 #include <mach/at91rm9200.h>
 #include <mach/at91rm9200_mc.h>
 #include <mach/at91_ramc.h>
+#include <mach/hardware.h>
 
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 /* --------------------------------------------------------------------
@@ -962,6 +965,14 @@ static struct atmel_uart_data uart0_data = {
 	.use_dma_rx	= 1,
 };
 
+static struct gpiod_lookup_table uart0_gpios_table = {
+	.dev_id = "atmel_usart",
+	.table = {
+		GPIO_LOOKUP("pioA", 21, "rts", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static u64 uart0_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device at91rm9200_uart0_device = {
@@ -987,9 +998,10 @@ static inline void configure_usart0_pins(unsigned pins)
 	if (pins & ATMEL_UART_RTS) {
 		/*
 		 * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
-		 *  We need to drive the pin manually.  Default is off (RTS is active low).
+		 * We need to drive the pin manually. The serial driver will driver
+		 * this to high when initializing.
 		 */
-		at91_set_gpio_output(AT91_PIN_PA21, 1);
+		gpiod_add_lookup_table(&uart0_gpios_table);
 	}
 }
 
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index bc7b363a3083..7fd13aef9827 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -31,6 +31,7 @@
 #include <asm/mach/time.h>
 
 #include <mach/at91_st.h>
+#include <mach/hardware.h>
 
 static unsigned long last_crtr;
 static u32 irqmask;
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 6c821e562159..c3d22be73b7c 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -21,6 +21,7 @@
 #include <mach/cpu.h>
 #include <mach/at91_dbgu.h>
 #include <mach/at91sam9260.h>
+#include <mach/hardware.h>
 
 #include "at91_aic.h"
 #include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index eda8d1679d40..ef88e0fe4e80 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -24,11 +24,11 @@
 #include <mach/at91sam9260_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91_adc.h>
+#include <mach/hardware.h>
 
 #include "board.h"
 #include "generic.h"
-
+#include "gpio.h"
 
 /* --------------------------------------------------------------------
  *  USB Host
@@ -1255,12 +1255,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	at91_set_A_periph(AT91_PIN_PC10, 0);    /* CFRNW */
 	at91_set_A_periph(AT91_PIN_PC15, 1);    /* NWAIT */
 
-	if (data->flags & AT91_CF_TRUE_IDE)
-#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
+	if (IS_ENABLED(CONFIG_PATA_AT91) && (data->flags & AT91_CF_TRUE_IDE))
 		pdev->name = "pata_at91";
-#else
-#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
-#endif
 	else
 		pdev->name = "at91_cf";
 
@@ -1292,7 +1288,7 @@ static struct resource adc_resources[] = {
 };
 
 static struct platform_device at91_adc_device = {
-	.name		= "at91_adc",
+	.name		= "at91sam9260-adc",
 	.id		= -1,
 	.dev		= {
 				.platform_data		= &adc_data,
@@ -1304,30 +1300,23 @@ static struct platform_device at91_adc_device = {
 static struct at91_adc_trigger at91_adc_triggers[] = {
 	[0] = {
 		.name = "timer-counter-0",
-		.value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN,
+		.value = 0x1,
 	},
 	[1] = {
 		.name = "timer-counter-1",
-		.value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN,
+		.value = 0x3,
 	},
 	[2] = {
 		.name = "timer-counter-2",
-		.value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN,
+		.value = 0x5,
 	},
 	[3] = {
 		.name = "external",
-		.value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN,
+		.value = 0xd,
 		.is_external = true,
 	},
 };
 
-static struct at91_adc_reg_desc at91_adc_register_g20 = {
-	.channel_base = AT91_ADC_CHR(0),
-	.drdy_mask = AT91_ADC_DRDY,
-	.status_register = AT91_ADC_SR,
-	.trigger_register = AT91_ADC_MR,
-};
-
 void __init at91_add_device_adc(struct at91_adc_data *data)
 {
 	if (!data)
@@ -1345,9 +1334,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data)
 	if (data->use_external_triggers)
 		at91_set_A_periph(AT91_PIN_PA22, 0);
 
-	data->num_channels = 4;
 	data->startup_time = 10;
-	data->registers = &at91_adc_register_g20;
 	data->trigger_number = 4;
 	data->trigger_list = at91_adc_triggers;
 
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 6276b4c1acfe..fb164a5d04a9 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -20,15 +20,18 @@
 #include <asm/system_misc.h>
 #include <mach/cpu.h>
 #include <mach/at91sam9261.h>
+#include <mach/hardware.h>
 
 #include "at91_aic.h"
 #include "at91_rstc.h"
 #include "soc.h"
 #include "generic.h"
-#include "clock.h"
 #include "sam9_smc.h"
 #include "pm.h"
 
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
+
 /* --------------------------------------------------------------------
  *  Clocks
  * -------------------------------------------------------------------- */
@@ -189,6 +192,23 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("pioA", &pioA_clk),
 	CLKDEV_CON_ID("pioB", &pioB_clk),
 	CLKDEV_CON_ID("pioC", &pioC_clk),
+	/* more lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+	CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
+	CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &hck0),
+	CLKDEV_CON_DEV_ID("hclk", "600000.fb", &hck1),
+	CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -247,7 +267,9 @@ static void __init at91sam9261_register_clocks(void)
 	clk_register(&hck0);
 	clk_register(&hck1);
 }
-
+#else
+#define at91sam9261_register_clocks NULL
+#endif
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index b2a34740146a..29baacb5c359 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -25,10 +25,11 @@
 #include <mach/at91sam9261_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
 
 #include "board.h"
 #include "generic.h"
-
+#include "gpio.h"
 
 /* --------------------------------------------------------------------
  *  USB Host
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 37b90f4b990c..f30290572293 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -19,6 +19,7 @@
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
 #include <mach/at91sam9263.h>
+#include <mach/hardware.h>
 
 #include "at91_aic.h"
 #include "at91_rstc.h"
@@ -223,6 +224,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk),
 	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk),
 	CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 4aeadddbc181..309390d8e2f8 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -24,9 +24,11 @@
 #include <mach/at91sam9263_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
 
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 /* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 0f04ffe9c5a8..0a9e2fc8f796 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -19,6 +19,7 @@
 #include <linux/of_irq.h>
 
 #include <asm/mach/time.h>
+#include <mach/hardware.h>
 
 #define AT91_PIT_MR		0x00			/* Mode Register */
 #define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 2f455ce35268..9d3d544ac19c 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -20,6 +20,7 @@
 #include <asm/system_misc.h>
 #include <mach/at91sam9g45.h>
 #include <mach/cpu.h>
+#include <mach/hardware.h>
 
 #include "at91_aic.h"
 #include "soc.h"
@@ -181,7 +182,7 @@ static struct clk vdec_clk = {
 static struct clk adc_op_clk = {
 	.name		= "adc_op_clk",
 	.type		= CLK_TYPE_PERIPHERAL,
-	.rate_hz	= 13200000,
+	.rate_hz	= 300000,
 };
 
 /* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */
@@ -284,6 +285,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("pioE", &pioDE_clk),
 	/* Fake adc clock */
 	CLKDEV_CON_ID("adc_clk", &tsc_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index cb36fa872d30..391ab6bb536a 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -25,19 +25,20 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <mach/at91_adc.h>
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9g45_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
 #include <linux/platform_data/dma-atmel.h>
 #include <mach/atmel-mci.h>
+#include <mach/hardware.h>
 
 #include <media/atmel-isi.h>
 
 #include "board.h"
 #include "generic.h"
 #include "clock.h"
+#include "gpio.h"
 
 
 /* --------------------------------------------------------------------
@@ -1132,58 +1133,7 @@ static void __init at91_add_device_rtc(void) {}
 
 
 /* --------------------------------------------------------------------
- *  Touchscreen
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
-static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
-static struct at91_tsadcc_data tsadcc_data;
-
-static struct resource tsadcc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TSC,
-		.end	= AT91SAM9G45_BASE_TSC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device at91sam9g45_tsadcc_device = {
-	.name		= "atmel_tsadcc",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &tsadcc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &tsadcc_data,
-	},
-	.resource	= tsadcc_resources,
-	.num_resources	= ARRAY_SIZE(tsadcc_resources),
-};
-
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
-{
-	if (!data)
-		return;
-
-	at91_set_gpio_input(AT91_PIN_PD20, 0);	/* AD0_XR */
-	at91_set_gpio_input(AT91_PIN_PD21, 0);	/* AD1_XL */
-	at91_set_gpio_input(AT91_PIN_PD22, 0);	/* AD2_YT */
-	at91_set_gpio_input(AT91_PIN_PD23, 0);	/* AD3_TB */
-
-	tsadcc_data = *data;
-	platform_device_register(&at91sam9g45_tsadcc_device);
-}
-#else
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  ADC
+ *  ADC and touchscreen
  * -------------------------------------------------------------------- */
 
 #if IS_ENABLED(CONFIG_AT91_ADC)
@@ -1203,7 +1153,7 @@ static struct resource adc_resources[] = {
 };
 
 static struct platform_device at91_adc_device = {
-	.name		= "at91_adc",
+	.name		= "at91sam9g45-adc",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &adc_data,
@@ -1235,13 +1185,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = {
 	},
 };
 
-static struct at91_adc_reg_desc at91_adc_register_g45 = {
-	.channel_base = AT91_ADC_CHR(0),
-	.drdy_mask = AT91_ADC_DRDY,
-	.status_register = AT91_ADC_SR,
-	.trigger_register = 0x08,
-};
-
 void __init at91_add_device_adc(struct at91_adc_data *data)
 {
 	if (!data)
@@ -1267,9 +1210,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data)
 	if (data->use_external_triggers)
 		at91_set_A_periph(AT91_PIN_PD28, 0);
 
-	data->num_channels = 8;
 	data->startup_time = 40;
-	data->registers = &at91_adc_register_g45;
 	data->trigger_number = 4;
 	data->trigger_list = at91_adc_triggers;
 
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 4ef088c62eab..c8988fe5ff70 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -19,9 +19,10 @@
 #include "board.h"
 #include "soc.h"
 #include "generic.h"
-#include "clock.h"
 #include "sam9_smc.h"
 
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
 /* --------------------------------------------------------------------
  *  Clocks
  * -------------------------------------------------------------------- */
@@ -182,6 +183,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	/* additional fake clock for macb_hclk */
 	CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk),
 	CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk),
 };
 
 /*
@@ -214,6 +216,9 @@ static void __init at91sam9n12_register_clocks(void)
 			 ARRAY_SIZE(periph_clocks_lookups));
 
 }
+#else
+#define at91sam9n12_register_clocks NULL
+#endif
 
 /* --------------------------------------------------------------------
  *  AT91SAM9N12 processor initialization
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 3651517abedf..a79960f57e6a 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -20,18 +20,20 @@
 #include <mach/cpu.h>
 #include <mach/at91_dbgu.h>
 #include <mach/at91sam9rl.h>
+#include <mach/hardware.h>
 
 #include "at91_aic.h"
 #include "at91_rstc.h"
 #include "soc.h"
 #include "generic.h"
-#include "clock.h"
 #include "sam9_smc.h"
 #include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
  * -------------------------------------------------------------------- */
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
 
 /*
  * The peripheral clocks.
@@ -151,6 +153,11 @@ static struct clk ac97_clk = {
 	.pmc_mask	= 1 << AT91SAM9RL_ID_AC97C,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk adc_op_clk = {
+	.name		= "adc_op_clk",
+	.type		= CLK_TYPE_PERIPHERAL,
+	.rate_hz	= 1000000,
+};
 
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
@@ -176,6 +183,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&udphs_clk,
 	&lcdc_clk,
 	&ac97_clk,
+	&adc_op_clk,
 	// irq0
 };
 
@@ -196,6 +204,25 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("pioB", &pioB_clk),
 	CLKDEV_CON_ID("pioC", &pioC_clk),
 	CLKDEV_CON_ID("pioD", &pioD_clk),
+	/* more lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+	CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffc8000.pwm", &pwm_clk),
+	CLKDEV_CON_DEV_ID(NULL, "ffffc800.pwm", &pwm_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
+	CLKDEV_CON_ID("adc_clk", &tsc_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -238,6 +265,7 @@ static void __init at91sam9rl_register_clocks(void)
 	clk_register(&pck0);
 	clk_register(&pck1);
 }
+#endif
 
 /* --------------------------------------------------------------------
  *  GPIO
@@ -350,6 +378,8 @@ AT91_SOC_START(at91sam9rl)
 	.default_irq_priority = at91sam9rl_default_irq_priority,
 	.extern_irq = (1 << AT91SAM9RL_ID_IRQ0),
 	.ioremap_registers = at91sam9rl_ioremap_registers,
+#if defined(CONFIG_OLD_CLK_AT91)
 	.register_clocks = at91sam9rl_register_clocks,
+#endif
 	.init = at91sam9rl_initialize,
 AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index a698bdab2cce..0b1d71a7d9bf 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -21,10 +21,13 @@
 #include <mach/at91sam9rl_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
 #include <linux/platform_data/dma-atmel.h>
+#include <linux/platform_data/at91_adc.h>
 
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 /* --------------------------------------------------------------------
@@ -607,14 +610,13 @@ static void __init at91_add_device_tc(void) { }
 
 
 /* --------------------------------------------------------------------
- *  Touchscreen
+ *  ADC and Touchscreen
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
-static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
-static struct at91_tsadcc_data tsadcc_data;
+#if IS_ENABLED(CONFIG_AT91_ADC)
+static struct at91_adc_data adc_data;
 
-static struct resource tsadcc_resources[] = {
+static struct resource adc_resources[] = {
 	[0] = {
 		.start	= AT91SAM9RL_BASE_TSC,
 		.end	= AT91SAM9RL_BASE_TSC + SZ_16K - 1,
@@ -627,36 +629,71 @@ static struct resource tsadcc_resources[] = {
 	}
 };
 
-static struct platform_device at91sam9rl_tsadcc_device = {
-	.name		= "atmel_tsadcc",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &tsadcc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &tsadcc_data,
+static struct platform_device at91_adc_device = {
+	.name           = "at91sam9rl-adc",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &adc_data,
 	},
-	.resource	= tsadcc_resources,
-	.num_resources	= ARRAY_SIZE(tsadcc_resources),
+	.resource       = adc_resources,
+	.num_resources  = ARRAY_SIZE(adc_resources),
 };
 
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
+static struct at91_adc_trigger at91_adc_triggers[] = {
+	[0] = {
+		.name = "external-rising",
+		.value = 1,
+		.is_external = true,
+	},
+	[1] = {
+		.name = "external-falling",
+		.value = 2,
+		.is_external = true,
+	},
+	[2] = {
+		.name = "external-any",
+		.value = 3,
+		.is_external = true,
+	},
+	[3] = {
+		.name = "continuous",
+		.value = 6,
+		.is_external = false,
+	},
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
 {
 	if (!data)
 		return;
 
-	at91_set_A_periph(AT91_PIN_PA17, 0);	/* AD0_XR */
-	at91_set_A_periph(AT91_PIN_PA18, 0);	/* AD1_XL */
-	at91_set_A_periph(AT91_PIN_PA19, 0);	/* AD2_YT */
-	at91_set_A_periph(AT91_PIN_PA20, 0);	/* AD3_TB */
-
-	tsadcc_data = *data;
-	platform_device_register(&at91sam9rl_tsadcc_device);
+	if (test_bit(0, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PA17, 0);
+	if (test_bit(1, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PA18, 0);
+	if (test_bit(2, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PA19, 0);
+	if (test_bit(3, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PA20, 0);
+	if (test_bit(4, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PD6, 0);
+	if (test_bit(5, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PD7, 0);
+
+	if (data->use_external_triggers)
+		at91_set_A_periph(AT91_PIN_PB15, 0);
+
+	data->startup_time = 40;
+	data->trigger_number = 4;
+	data->trigger_list = at91_adc_triggers;
+
+	adc_data = *data;
+	platform_device_register(&at91_adc_device);
 }
 #else
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
 #endif
 
-
 /* --------------------------------------------------------------------
  *  RTC
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index 3e8ec26e39dc..028268ff3722 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -19,9 +19,10 @@
 #include "board.h"
 #include "soc.h"
 #include "generic.h"
-#include "clock.h"
 #include "sam9_smc.h"
 
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
 /* --------------------------------------------------------------------
  *  Clocks
  * -------------------------------------------------------------------- */
@@ -253,6 +254,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
 	CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
 	CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk),
 };
 
 /*
@@ -312,6 +314,9 @@ static void __init at91sam9x5_register_clocks(void)
 	clk_register(&pck0);
 	clk_register(&pck1);
 }
+#else
+#define at91sam9x5_register_clocks	NULL
+#endif
 
 /* --------------------------------------------------------------------
  *  AT91SAM9x5 processor initialization
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index bad94b84a46f..7523f1cdfe1d 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -19,7 +19,7 @@
 #include <asm/mach/arch.h>
 #include <mach/at91x40.h>
 #include <mach/at91_st.h>
-#include <mach/timex.h>
+#include <mach/hardware.h>
 
 #include "at91_aic.h"
 #include "generic.h"
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index c0e637adf65d..07d0bf2ac2da 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -25,6 +25,7 @@
 #include <linux/time.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <mach/at91x40.h>
 #include <asm/mach/time.h>
 
 #include "at91_tc.h"
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 35ab632bbf68..3f6dbcc34022 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -39,7 +39,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
-
+#include "gpio.h"
 
 static void __init onearm_init_early(void)
 {
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index f95e31cda4b3..597c649170aa 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -46,6 +46,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init afeb9260_init_early(void)
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 112e867c4abe..a30502c8d379 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -44,6 +44,7 @@
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init cam60_init_early(void)
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 92983050a9bd..47313d3ee037 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -39,6 +39,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init carmeva_init_early(void)
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 008527efdbcf..2037f78c84e7 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -48,6 +48,7 @@
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 static void __init cpu9krea_init_early(void)
 {
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 42f1353a4baf..c094350c9314 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -43,6 +43,8 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
+
 
 static struct gpio_led cpuat91_leds[] = {
 	{
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index e5fde215225b..0e35a45cf8d4 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -42,7 +42,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
-
+#include "gpio.h"
 
 static void __init csb337_init_early(void)
 {
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index fdf11061c577..18d027f529a8 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -39,6 +39,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init csb637_init_early(void)
diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c
index 3dab868b02fa..575b0be66ca8 100644
--- a/arch/arm/mach-at91/board-dt-sam9.c
+++ b/arch/arm/mach-at91/board-dt-sam9.c
@@ -13,6 +13,7 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
+#include <linux/clk-provider.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -25,6 +26,14 @@
 #include "generic.h"
 
 
+static void __init sam9_dt_timer_init(void)
+{
+#if defined(CONFIG_COMMON_CLK)
+	of_clk_init(NULL);
+#endif
+	at91sam926x_pit_init();
+}
+
 static const struct of_device_id irq_of_match[] __initconst = {
 
 	{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
@@ -43,7 +52,7 @@ static const char *at91_dt_board_compat[] __initdata = {
 
 DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
 	/* Maintainer: Atmel */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= sam9_dt_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91_dt_initialize,
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index f9be8161bbfa..aa457a8b22f5 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -38,6 +38,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init eb9200_init_early(void)
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index b2fcd71262ba..ede1373ccaba 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -42,6 +42,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init ecb_at91init_early(void)
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 77de410efc90..4e75321a8f2a 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -31,6 +31,8 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
+
 
 static void __init eco920_init_early(void)
 {
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 737c08563628..68f1ab6bd08f 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -37,6 +37,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 static void __init flexibity_init_early(void)
 {
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index c20a870ea9c9..8b22c60bb238 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -47,6 +47,7 @@
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 /*
  * The FOX Board G20 hardware comes as the "Netus G20" board with
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index c1d61d247790..b729dd1271bf 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -31,6 +31,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
 
 #include "at91_aic.h"
 #include "board.h"
@@ -38,6 +39,7 @@
 #include "generic.h"
 #include "gsia18s.h"
 #include "stamp9g20.h"
+#include "gpio.h"
 
 static void __init gsia18s_init_early(void)
 {
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 88e2f5d2d16d..93b1df42f639 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -39,6 +39,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init kafa_init_early(void)
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 0c519d9ebffc..d58d36225e08 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -42,6 +42,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init kb9202_init_early(void)
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 65c0d6b5ecba..b48d95ec5152 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -30,12 +30,14 @@
 #include <asm/mach/arch.h>
 
 #include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
 
 #include "at91_aic.h"
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
 #include "stamp9g20.h"
+#include "gpio.h"
 
 
 static void __init pcontrol_g20_init_early(void)
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index ab2b2ec36c14..2c0f2d554d84 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -43,6 +43,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init picotux200_init_early(void)
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 8b17dadc1aba..953cea416754 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -45,6 +45,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index f6d7f1958c7e..f28e8b74df4b 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -31,6 +31,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 static void __init rsi_ews_init_early(void)
 {
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 43ee4dc43b50..d24dda67e2d3 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -43,6 +43,7 @@
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index f4f8735315da..65dea12d685e 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -49,6 +49,7 @@
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 473546b9408b..4637432de08f 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -53,6 +53,7 @@
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 2f931915c80c..cd2726ee5add 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -52,6 +52,7 @@
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index f9cd1f2c7146..e1be6e25b380 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -50,6 +50,7 @@
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 /*
  * board revision encoding
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ef39078c8ce2..1ea61328f30d 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -50,6 +50,7 @@
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init ek_init_early(void)
@@ -300,21 +301,13 @@ static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 
 
 /*
- * Touchscreen
- */
-static struct at91_tsadcc_data ek_tsadcc_data = {
-	.adc_clock		= 300000,
-	.pendet_debounce	= 0x0d,
-	.ts_sample_hold_time	= 0x0a,
-};
-
-/*
- * ADCs
+ * ADCs and touchscreen
  */
 static struct at91_adc_data ek_adc_data = {
 	.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
 	.use_external_triggers = true,
 	.vref = 3300,
+	.touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
 };
 
 /*
@@ -485,9 +478,7 @@ static void __init ek_board_init(void)
 	at91_add_device_isi(&isi_data, true);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
-	/* Touch Screen */
-	at91_add_device_tsadcc(&ek_tsadcc_data);
-	/* ADC */
+	/* ADC and touchscreen */
 	at91_add_device_adc(&ek_adc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 604eecf6cd70..b64648b4a1fc 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -18,6 +18,7 @@
 #include <linux/clk.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/platform_data/at91_adc.h>
 
 #include <video/atmel_lcdc.h>
 
@@ -38,6 +39,7 @@
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init ek_init_early(void)
@@ -229,12 +231,13 @@ static struct gpio_led ek_leds[] = {
 
 
 /*
- * Touchscreen
+ * ADC + Touchscreen
  */
-static struct at91_tsadcc_data ek_tsadcc_data = {
-	.adc_clock		= 1000000,
-	.pendet_debounce	= 0x0f,
-	.ts_sample_hold_time	= 0x03,
+static struct at91_adc_data ek_adc_data = {
+	.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5),
+	.use_external_triggers = true,
+	.vref = 3300,
+	.touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
 };
 
 
@@ -310,8 +313,8 @@ static void __init ek_board_init(void)
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* AC97 */
 	at91_add_device_ac97(&ek_ac97_data);
-	/* Touch Screen Controller */
-	at91_add_device_tsadcc(&ek_tsadcc_data);
+	/* Touch Screen Controller + ADC */
+	at91_add_device_adc(&ek_adc_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	/* Push Buttons */
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index f1d49e929ccb..1b870e6def0c 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -38,6 +38,7 @@
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 #define SNAPPER9260_IO_EXP_GPIO(x)	(NR_BUILTIN_GPIO + (x))
 
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 869cbecf00b7..3b575036ff96 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -26,11 +26,13 @@
 #include <asm/mach/arch.h>
 
 #include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
 
 #include "at91_aic.h"
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 void __init stamp9g20_init_early(void)
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index be083771df2e..46fdb0c68a68 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -50,6 +50,7 @@
 #include "at91_aic.h"
 #include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
 
 static void __init yl9200_init_early(void)
diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h
index 6c08b341167d..4e773b55bc2d 100644
--- a/arch/arm/mach-at91/board.h
+++ b/arch/arm/mach-at91/board.h
@@ -118,9 +118,6 @@ struct isi_platform_data;
 extern void __init at91_add_device_isi(struct isi_platform_data *data,
 		bool use_pck_as_mck);
 
- /* Touchscreen Controller */
-extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
-
 /* CAN */
 extern void __init at91_add_device_can(struct at91_can_data *data);
 
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index a5afcf76550e..d3f05aaad8ba 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -29,6 +29,7 @@
 #include <mach/at91_pio.h>
 
 #include "generic.h"
+#include "gpio.h"
 
 #define MAX_NB_GPIO_PER_BANK	32
 
@@ -49,6 +50,7 @@ static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
 static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
 static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
 static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
+static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset);
 static int at91_gpiolib_direction_output(struct gpio_chip *chip,
 					 unsigned offset, int val);
 static int at91_gpiolib_direction_input(struct gpio_chip *chip,
@@ -60,6 +62,7 @@ static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
 		.chip = {						\
 			.label		  = name,			\
 			.request	  = at91_gpiolib_request,	\
+			.get_direction    = at91_gpiolib_get_direction, \
 			.direction_input  = at91_gpiolib_direction_input, \
 			.direction_output = at91_gpiolib_direction_output, \
 			.get		  = at91_gpiolib_get,		\
@@ -799,6 +802,17 @@ static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
 	return 0;
 }
 
+static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+	u32 osr;
+
+	osr = __raw_readl(pio + PIO_OSR);
+	return !(osr & mask);
+}
+
 static int at91_gpiolib_direction_input(struct gpio_chip *chip,
 					unsigned offset)
 {
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/gpio.h
index 5fc23771c154..eed465ab0dd7 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/gpio.h
@@ -209,14 +209,6 @@ extern int at91_get_gpio_value(unsigned pin);
 extern void at91_gpio_suspend(void);
 extern void at91_gpio_resume(void);
 
-#ifdef CONFIG_PINCTRL_AT91
-extern void at91_pinctrl_gpio_suspend(void);
-extern void at91_pinctrl_gpio_resume(void);
-#else
-static inline void at91_pinctrl_gpio_suspend(void) {}
-static inline void at91_pinctrl_gpio_resume(void) {}
-#endif
-
 #endif	/* __ASSEMBLY__ */
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
deleted file mode 100644
index c287307b9a3b..000000000000
--- a/arch/arm/mach-at91/include/mach/at91_adc.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_adc.h
- *
- * Copyright (C) SAN People
- *
- * Analog-to-Digital Converter (ADC) registers.
- * Based on AT91SAM9260 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ADC_H
-#define AT91_ADC_H
-
-#define AT91_ADC_CR		0x00		/* Control Register */
-#define		AT91_ADC_SWRST		(1 << 0)	/* Software Reset */
-#define		AT91_ADC_START		(1 << 1)	/* Start Conversion */
-
-#define AT91_ADC_MR		0x04		/* Mode Register */
-#define		AT91_ADC_TRGEN		(1 << 0)	/* Trigger Enable */
-#define		AT91_ADC_TRGSEL		(7 << 1)	/* Trigger Selection */
-#define			AT91_ADC_TRGSEL_TC0		(0 << 1)
-#define			AT91_ADC_TRGSEL_TC1		(1 << 1)
-#define			AT91_ADC_TRGSEL_TC2		(2 << 1)
-#define			AT91_ADC_TRGSEL_EXTERNAL	(6 << 1)
-#define		AT91_ADC_LOWRES		(1 << 4)	/* Low Resolution */
-#define		AT91_ADC_SLEEP		(1 << 5)	/* Sleep Mode */
-#define		AT91_ADC_PRESCAL_9260	(0x3f << 8)	/* Prescalar Rate Selection */
-#define		AT91_ADC_PRESCAL_9G45	(0xff << 8)
-#define			AT91_ADC_PRESCAL_(x)	((x) << 8)
-#define		AT91_ADC_STARTUP_9260	(0x1f << 16)	/* Startup Up Time */
-#define		AT91_ADC_STARTUP_9G45	(0x7f << 16)
-#define		AT91_ADC_STARTUP_9X5	(0xf << 16)
-#define			AT91_ADC_STARTUP_(x)	((x) << 16)
-#define		AT91_ADC_SHTIM		(0xf  << 24)	/* Sample & Hold Time */
-#define			AT91_ADC_SHTIM_(x)	((x) << 24)
-
-#define AT91_ADC_CHER		0x10		/* Channel Enable Register */
-#define AT91_ADC_CHDR		0x14		/* Channel Disable Register */
-#define AT91_ADC_CHSR		0x18		/* Channel Status Register */
-#define		AT91_ADC_CH(n)		(1 << (n))	/* Channel Number */
-
-#define AT91_ADC_SR		0x1C		/* Status Register */
-#define		AT91_ADC_EOC(n)		(1 << (n))	/* End of Conversion on Channel N */
-#define		AT91_ADC_OVRE(n)	(1 << ((n) + 8))/* Overrun Error on Channel N */
-#define		AT91_ADC_DRDY		(1 << 16)	/* Data Ready */
-#define		AT91_ADC_GOVRE		(1 << 17)	/* General Overrun Error */
-#define		AT91_ADC_ENDRX		(1 << 18)	/* End of RX Buffer */
-#define		AT91_ADC_RXFUFF		(1 << 19)	/* RX Buffer Full */
-
-#define AT91_ADC_SR_9X5		0x30		/* Status Register for 9x5 */
-#define		AT91_ADC_SR_DRDY_9X5	(1 << 24)	/* Data Ready */
-
-#define AT91_ADC_LCDR		0x20		/* Last Converted Data Register */
-#define		AT91_ADC_LDATA		(0x3ff)
-
-#define AT91_ADC_IER		0x24		/* Interrupt Enable Register */
-#define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */
-#define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */
-#define		AT91_ADC_IER_PEN	(1 << 29)
-#define		AT91_ADC_IER_NOPEN	(1 << 30)
-#define		AT91_ADC_IER_XRDY	(1 << 20)
-#define		AT91_ADC_IER_YRDY	(1 << 21)
-#define		AT91_ADC_IER_PRDY	(1 << 22)
-#define		AT91_ADC_ISR_PENS	(1 << 31)
-
-#define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */
-#define		AT91_ADC_DATA		(0x3ff)
-
-#define AT91_ADC_CDR0_9X5	(0x50)			/* Channel Data Register 0 for 9X5 */
-
-#define AT91_ADC_ACR		0x94	/* Analog Control Register */
-#define		AT91_ADC_ACR_PENDETSENS	(0x3 << 0)	/* pull-up resistor */
-
-#define AT91_ADC_TSMR		0xB0
-#define		AT91_ADC_TSMR_TSMODE	(3 << 0)	/* Touch Screen Mode */
-#define			AT91_ADC_TSMR_TSMODE_NONE		(0 << 0)
-#define			AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS	(1 << 0)
-#define			AT91_ADC_TSMR_TSMODE_4WIRE_PRESS	(2 << 0)
-#define			AT91_ADC_TSMR_TSMODE_5WIRE		(3 << 0)
-#define		AT91_ADC_TSMR_TSAV	(3 << 4)	/* Averages samples */
-#define			AT91_ADC_TSMR_TSAV_(x)		((x) << 4)
-#define		AT91_ADC_TSMR_SCTIM	(0x0f << 16)	/* Switch closure time */
-#define		AT91_ADC_TSMR_PENDBC	(0x0f << 28)	/* Pen Debounce time */
-#define			AT91_ADC_TSMR_PENDBC_(x)	((x) << 28)
-#define		AT91_ADC_TSMR_NOTSDMA	(1 << 22)	/* No Touchscreen DMA */
-#define		AT91_ADC_TSMR_PENDET_DIS	(0 << 24)	/* Pen contact detection disable */
-#define		AT91_ADC_TSMR_PENDET_ENA	(1 << 24)	/* Pen contact detection enable */
-
-#define AT91_ADC_TSXPOSR	0xB4
-#define AT91_ADC_TSYPOSR	0xB8
-#define AT91_ADC_TSPRESSR	0xBC
-
-#define AT91_ADC_TRGR_9260	AT91_ADC_MR
-#define AT91_ADC_TRGR_9G45	0x08
-#define AT91_ADC_TRGR_9X5	0xC0
-
-/* Trigger Register bit field */
-#define		AT91_ADC_TRGR_TRGPER	(0xffff << 16)
-#define			AT91_ADC_TRGR_TRGPER_(x)	((x) << 16)
-#define		AT91_ADC_TRGR_TRGMOD	(0x7 << 0)
-#define			AT91_ADC_TRGR_MOD_PERIOD_TRIG	(5 << 0)
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index 90680217064e..38dca2bb027f 100644
--- a/arch/arm/mach-at91/include/mach/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -55,4 +55,6 @@
 #define	AT91_PS_CR	(AT91_PS + 0)	/* PS Control register */
 #define	AT91_PS_CR_CPU	(1 << 0)	/* CPU clock disable bit */
 
+#define AT91X40_MASTER_CLOCK	40000000
+
 #endif /* AT91X40_H */
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index f17aa3150019..56338245653a 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -104,5 +104,20 @@
 /* Clocks */
 #define AT91_SLOW_CLOCK		32768		/* slow clock */
 
+/*
+ * FIXME: this is needed to communicate between the pinctrl driver and
+ * the PM implementation in the machine. Possibly part of the PM
+ * implementation should be moved down into the pinctrl driver and get
+ * called as part of the generic suspend/resume path.
+ */
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+#endif
 
 #endif
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 3e22978b5547..77c4d8fd03fd 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 
 #include "board.h"
+#include "gpio.h"
 
 
 /* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 590b52dea9f7..e95554532987 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -27,10 +27,12 @@
 #include <asm/mach/irq.h>
 
 #include <mach/cpu.h>
+#include <mach/hardware.h>
 
 #include "at91_aic.h"
 #include "generic.h"
 #include "pm.h"
+#include "gpio.h"
 
 /*
  * Show the reason for the previous system reset.
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index b26156bf15db..826315af6d11 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -36,6 +36,7 @@ void sam9_smc_write_mode(int id, int cs,
 {
 	sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
 }
+EXPORT_SYMBOL_GPL(sam9_smc_write_mode);
 
 static void sam9_smc_cs_configure(void __iomem *base,
 					struct sam9_smc_config *config)
@@ -69,6 +70,7 @@ void sam9_smc_configure(int id, int cs,
 {
 	sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
 }
+EXPORT_SYMBOL_GPL(sam9_smc_configure);
 
 static void sam9_smc_cs_read_mode(void __iomem *base,
 					struct sam9_smc_config *config)
@@ -84,6 +86,7 @@ void sam9_smc_read_mode(int id, int cs,
 {
 	sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
 }
+EXPORT_SYMBOL_GPL(sam9_smc_read_mode);
 
 static void sam9_smc_cs_read(void __iomem *base,
 					struct sam9_smc_config *config)
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index f7ca97b7291e..f7a07a58ebb6 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -351,7 +351,7 @@ void __init at91_ioremap_matrix(u32 base_addr)
 		panic("Impossible to ioremap at91_matrix_base\n");
 }
 
-#if defined(CONFIG_OF)
+#if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40)
 static struct of_device_id rstc_ids[] = {
 	{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart },
 	{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
diff --git a/arch/arm/mach-at91/sysirq_mask.c b/arch/arm/mach-at91/sysirq_mask.c
index 2ba694f9626b..f8bc3511a8c8 100644
--- a/arch/arm/mach-at91/sysirq_mask.c
+++ b/arch/arm/mach-at91/sysirq_mask.c
@@ -25,24 +25,28 @@
 
 #include "generic.h"
 
-#define AT91_RTC_IDR	0x24	/* Interrupt Disable Register */
-#define AT91_RTC_IMR	0x28	/* Interrupt Mask Register */
+#define AT91_RTC_IDR		0x24	/* Interrupt Disable Register */
+#define AT91_RTC_IMR		0x28	/* Interrupt Mask Register */
+#define AT91_RTC_IRQ_MASK	0x1f	/* Available IRQs mask */
 
 void __init at91_sysirq_mask_rtc(u32 rtc_base)
 {
 	void __iomem *base;
-	u32 mask;
 
 	base = ioremap(rtc_base, 64);
 	if (!base)
 		return;
 
-	mask = readl_relaxed(base + AT91_RTC_IMR);
-	if (mask) {
-		pr_info("AT91: Disabling rtc irq\n");
-		writel_relaxed(mask, base + AT91_RTC_IDR);
-		(void)readl_relaxed(base + AT91_RTC_IMR);	/* flush */
-	}
+	/*
+	 * sam9x5 SoCs have the following errata:
+	 * "RTC: Interrupt Mask Register cannot be used
+	 *  Interrupt Mask Register read always returns 0."
+	 *
+	 * Hence we're not relying on IMR values to disable
+	 * interrupts.
+	 */
+	writel_relaxed(AT91_RTC_IRQ_MASK, base + AT91_RTC_IDR);
+	(void)readl_relaxed(base + AT91_RTC_IMR);	/* flush */
 
 	iounmap(base);
 }
diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
new file mode 100644
index 000000000000..8be7e0ae1922
--- /dev/null
+++ b/arch/arm/mach-axxia/Kconfig
@@ -0,0 +1,16 @@
+config ARCH_AXXIA
+	bool "LSI Axxia platforms" if (ARCH_MULTI_V7 && ARM_LPAE)
+	select ARCH_DMA_ADDR_T_64BIT
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_TIMER_SP804
+	select HAVE_ARM_ARCH_TIMER
+	select MFD_SYSCON
+	select MIGHT_HAVE_PCI
+	select PCI_DOMAINS if PCI
+	select ZONE_DMA
+	help
+	  This enables support for the LSI Axxia devices.
+
+	  The LSI Axxia platforms require a Flattened Device Tree to be passed
+	  to the kernel.
diff --git a/arch/arm/mach-axxia/Makefile b/arch/arm/mach-axxia/Makefile
new file mode 100644
index 000000000000..ec4f68b460c6
--- /dev/null
+++ b/arch/arm/mach-axxia/Makefile
@@ -0,0 +1,2 @@
+obj-y				+= axxia.o
+obj-$(CONFIG_SMP)		+= platsmp.o
diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h b/arch/arm/mach-axxia/axxia.c
index 8d4066b16b3f..19e5a1d95397 100644
--- a/arch/arm/mach-lpc32xx/include/mach/timex.h
+++ b/arch/arm/mach-axxia/axxia.c
@@ -1,9 +1,7 @@
 /*
- * arch/arm/mach-lpc32xx/include/mach/timex.h
+ * Support for the LSI Axxia SoC devices based on ARM cores.
  *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
+ * Copyright (C) 2012 LSI
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,14 +13,16 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
+#include <linux/init.h>
+#include <asm/mach/arch.h>
 
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * Rate in Hz of the main system oscillator. This value should match
- * the value 'MAIN_OSC_FREQ' in platform.h
- */
-#define CLOCK_TICK_RATE	13000000
+static const char *axxia_dt_match[] __initconst = {
+	"lsi,axm5516",
+	"lsi,axm5516-sim",
+	"lsi,axm5516-emu",
+	NULL
+};
 
-#endif
+DT_MACHINE_START(AXXIA_DT, "LSI Axxia AXM55XX")
+	.dt_compat = axxia_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c
new file mode 100644
index 000000000000..959d4df3d2b6
--- /dev/null
+++ b/arch/arm/mach-axxia/platsmp.c
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/arm/mach-axxia/platsmp.c
+ *
+ * Copyright (C) 2012 LSI Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/cacheflush.h>
+
+/* Syscon register offsets for releasing cores from reset */
+#define SC_CRIT_WRITE_KEY	0x1000
+#define SC_RST_CPU_HOLD		0x1010
+
+/*
+ * Write the kernel entry point for secondary CPUs to the specified address
+ */
+static void write_release_addr(u32 release_phys)
+{
+	u32 *virt = (u32 *) phys_to_virt(release_phys);
+	writel_relaxed(virt_to_phys(secondary_startup), virt);
+	/* Make sure this store is visible to other CPUs */
+	smp_wmb();
+	__cpuc_flush_dcache_area(virt, sizeof(u32));
+}
+
+static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	struct device_node *syscon_np;
+	void __iomem *syscon;
+	u32 tmp;
+
+	syscon_np = of_find_compatible_node(NULL, NULL, "lsi,axxia-syscon");
+	if (!syscon_np)
+		return -ENOENT;
+
+	syscon = of_iomap(syscon_np, 0);
+	if (!syscon)
+		return -ENOMEM;
+
+	tmp = readl(syscon + SC_RST_CPU_HOLD);
+	writel(0xab, syscon + SC_CRIT_WRITE_KEY);
+	tmp &= ~(1 << cpu);
+	writel(tmp, syscon + SC_RST_CPU_HOLD);
+
+	return 0;
+}
+
+static void __init axxia_smp_prepare_cpus(unsigned int max_cpus)
+{
+	int cpu_count = 0;
+	int cpu;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs actually
+	 * populated at the present time.
+	 */
+	for_each_possible_cpu(cpu) {
+		struct device_node *np;
+		u32 release_phys;
+
+		np = of_get_cpu_node(cpu, NULL);
+		if (!np)
+			continue;
+		if (of_property_read_u32(np, "cpu-release-addr", &release_phys))
+			continue;
+
+		if (cpu_count < max_cpus) {
+			set_cpu_present(cpu, true);
+			cpu_count++;
+		}
+
+		if (release_phys != 0)
+			write_release_addr(release_phys);
+	}
+}
+
+static struct smp_operations axxia_smp_ops __initdata = {
+	.smp_prepare_cpus	= axxia_smp_prepare_cpus,
+	.smp_boot_secondary	= axxia_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(axxia_smp, "lsi,syscon-release", &axxia_smp_ops);
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index b1aa6a9b3bd1..9bc6db1c1348 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -1,37 +1,91 @@
 config ARCH_BCM
-	bool "Broadcom SoC Support"
-	depends on ARCH_MULTIPLATFORM
+	bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7
 	help
-	  This enables support for Broadcom ARM based SoC
-          chips
-
-if ARCH_BCM
+	  This enables support for Broadcom ARM based SoC chips
 
 menu "Broadcom SoC Selection"
+	depends on ARCH_BCM
 
 config ARCH_BCM_MOBILE
-	bool "Broadcom Mobile SoC" if ARCH_MULTI_V7
-	depends on MMU
+	bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
+	select ARM_ERRATA_775420
 	select ARM_GIC
-	select CPU_V7
-	select CLKSRC_OF
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_TIME
 	select GPIO_BCM_KONA
-	select SPARSE_IRQ
 	select TICK_ONESHOT
-	select CACHE_L2X0
 	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL
 	help
 	  This enables support for systems based on Broadcom mobile SoCs.
-	  It currently supports the 'BCM281XX' family, which includes
-	  BCM11130, BCM11140, BCM11351, BCM28145 and
-	  BCM28155 variants.
+
+if ARCH_BCM_MOBILE
+
+menu "Broadcom Mobile SoC Selection"
+
+config ARCH_BCM_281XX
+	bool "Broadcom BCM281XX SoC family"
+	default y
+	help
+	  Enable support for the the BCM281XX family, which includes
+	  BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155
+	  variants.
+
+config ARCH_BCM_21664
+	bool "Broadcom BCM21664 SoC family"
+	default y
+	help
+	  Enable support for the the BCM21664 family, which includes
+	  BCM21663 and BCM21664 variants.
+
+config ARCH_BCM_MOBILE_L2_CACHE
+	bool "Broadcom mobile SoC level 2 cache support"
+	depends on (ARCH_BCM_281XX || ARCH_BCM_21664)
+	default y
+	select CACHE_L2X0
+	select ARCH_BCM_MOBILE_SMC
+
+config ARCH_BCM_MOBILE_SMC
+	bool
+	depends on ARCH_BCM_281XX || ARCH_BCM_21664
 
 endmenu
 
 endif
+
+config ARCH_BCM2835
+	bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select ARM_ERRATA_411920
+	select ARM_TIMER_SP804
+	select CLKSRC_OF
+	select PINCTRL
+	select PINCTRL_BCM2835
+	help
+	  This enables support for the Broadcom BCM2835 SoC. This SoC is
+	  used in the Raspberry Pi and Roku 2 devices.
+
+config ARCH_BCM_5301X
+	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+	select ARM_GIC
+	select CACHE_L2X0
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select ARM_GLOBAL_TIMER
+	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+	help
+	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
+
+	  This is a network SoC line mostly used in home routers and
+	  wifi access points, it's internal name is Northstar.
+	  This inclused the following SoC: BCM53010, BCM53011, BCM53012,
+	  BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
+	  BCM4708 and BCM4709.
+
+	  Do not confuse this with the BCM4760 which is a totally
+	  different SoC or with the older BCM47XX and BCM53XX based
+	  network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
+
+endmenu
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index c2ccd5a0f772..731292114975 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2012-2013 Broadcom Corporation
+# Copyright (C) 2012-2014 Broadcom Corporation
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
@@ -10,6 +10,23 @@
 # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-obj-$(CONFIG_ARCH_BCM_MOBILE)	:= board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
-plus_sec := $(call as-instr,.arch_extension sec,+sec)
-AFLAGS_bcm_kona_smc_asm.o	:=-Wa,-march=armv7-a$(plus_sec)
+# BCM281XX
+obj-$(CONFIG_ARCH_BCM_281XX)	+= board_bcm281xx.o
+
+# BCM21664
+obj-$(CONFIG_ARCH_BCM_21664)	+= board_bcm21664.o
+
+# BCM281XX and BCM21664 L2 cache control
+obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
+
+# Support for secure monitor traps
+obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o
+ifeq ($(call as-instr,.arch_extension sec,as_has_sec),as_has_sec)
+CFLAGS_bcm_kona_smc.o		+= -Wa,-march=armv7-a+sec -DREQUIRES_SEC
+endif
+
+# BCM2835
+obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
+
+# BCM5301X
+obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o
diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c
new file mode 100644
index 000000000000..e9bcbdbce555
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm_5301x.c
@@ -0,0 +1,56 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ *
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <asm/mach/arch.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+
+
+static bool first_fault = true;
+
+static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
+				 struct pt_regs *regs)
+{
+	if (fsr == 0x1c06 && first_fault) {
+		first_fault = false;
+
+		/*
+		 * These faults with code 0x1c06 happens for no good reason,
+		 * possibly left over from the CFE boot loader.
+		 */
+		pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
+		addr, fsr);
+
+		/* Returning non-zero causes fault display and panic */
+		return 0;
+	}
+
+	/* Others should cause a fault */
+	return 1;
+}
+
+static void __init bcm5301x_init_early(void)
+{
+	/* Install our hook */
+	hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
+			"imprecise external abort");
+}
+
+static const char __initconst *bcm5301x_dt_compat[] = {
+	"brcm,bcm4708",
+	NULL,
+};
+
+DT_MACHINE_START(BCM5301X, "BCM5301X")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_early	= bcm5301x_init_early,
+	.dt_compat	= bcm5301x_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c
index 5e31e918f325..a55a7ecf146a 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.c
+++ b/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -21,11 +21,8 @@
 
 #include "bcm_kona_smc.h"
 
-struct secure_bridge_data {
-	void __iomem *bounce;		/* virtual address */
-	u32 __iomem buffer_addr;	/* physical address */
-	int initialized;
-} bridge_data;
+static u32		bcm_smc_buffer_phys;	/* physical address */
+static void __iomem	*bcm_smc_buffer;	/* virtual address */
 
 struct bcm_kona_smc_data {
 	unsigned service_id;
@@ -33,6 +30,7 @@ struct bcm_kona_smc_data {
 	unsigned arg1;
 	unsigned arg2;
 	unsigned arg3;
+	unsigned result;
 };
 
 static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
@@ -41,59 +39,125 @@ static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
 	{},
 };
 
-/* Map in the bounce area */
+/* Map in the args buffer area */
 int __init bcm_kona_smc_init(void)
 {
 	struct device_node *node;
+	const __be32 *prop_val;
+	u64 prop_size = 0;
+	unsigned long buffer_size;
+	u32 buffer_phys;
 
 	/* Read buffer addr and size from the device tree node */
 	node = of_find_matching_node(NULL, bcm_kona_smc_ids);
 	if (!node)
 		return -ENODEV;
 
-	/* Don't care about size or flags of the DT node */
-	bridge_data.buffer_addr =
-		be32_to_cpu(*of_get_address(node, 0, NULL, NULL));
-	BUG_ON(!bridge_data.buffer_addr);
+	prop_val = of_get_address(node, 0, &prop_size, NULL);
+	if (!prop_val)
+		return -EINVAL;
 
-	bridge_data.bounce = of_iomap(node, 0);
-	BUG_ON(!bridge_data.bounce);
+	/* We assume space for four 32-bit arguments */
+	if (prop_size < 4 * sizeof(u32) || prop_size > (u64)ULONG_MAX)
+		return -EINVAL;
+	buffer_size = (unsigned long)prop_size;
 
-	bridge_data.initialized = 1;
+	buffer_phys = be32_to_cpup(prop_val);
+	if (!buffer_phys)
+		return -EINVAL;
+
+	bcm_smc_buffer = ioremap(buffer_phys, buffer_size);
+	if (!bcm_smc_buffer)
+		return -ENOMEM;
+	bcm_smc_buffer_phys = buffer_phys;
 
 	pr_info("Kona Secure API initialized\n");
 
 	return 0;
 }
 
+/*
+ * int bcm_kona_do_smc(u32 service_id, u32 buffer_addr)
+ *
+ * Only core 0 can run the secure monitor code.  If an "smc" request
+ * is initiated on a different core it must be redirected to core 0
+ * for execution.  We rely on the caller to handle this.
+ *
+ * Each "smc" request supplies a service id and the address of a
+ * buffer containing parameters related to the service to be
+ * performed.  A flags value defines the behavior of the level 2
+ * cache and interrupt handling while the secure monitor executes.
+ *
+ * Parameters to the "smc" request are passed in r4-r6 as follows:
+ *     r4	service id
+ *     r5	flags (SEC_ROM_*)
+ *     r6	physical address of buffer with other parameters
+ *
+ * Execution of an "smc" request produces two distinct results.
+ *
+ * First, the secure monitor call itself (regardless of the specific
+ * service request) can succeed, or can produce an error.  When an
+ * "smc" request completes this value is found in r12; it should
+ * always be SEC_EXIT_NORMAL.
+ *
+ * In addition, the particular service performed produces a result.
+ * The values that should be expected depend on the service.  We
+ * therefore return this value to the caller, so it can handle the
+ * request result appropriately.  This result value is found in r0
+ * when the "smc" request completes.
+ */
+static int bcm_kona_do_smc(u32 service_id, u32 buffer_phys)
+{
+	register u32 ip asm("ip");	/* Also called r12 */
+	register u32 r0 asm("r0");
+	register u32 r4 asm("r4");
+	register u32 r5 asm("r5");
+	register u32 r6 asm("r6");
+
+	r4 = service_id;
+	r5 = 0x3;		/* Keep IRQ and FIQ off in SM */
+	r6 = buffer_phys;
+
+	asm volatile (
+		/* Make sure we got the registers we want */
+		__asmeq("%0", "ip")
+		__asmeq("%1", "r0")
+		__asmeq("%2", "r4")
+		__asmeq("%3", "r5")
+		__asmeq("%4", "r6")
+#ifdef REQUIRES_SEC
+		".arch_extension sec\n"
+#endif
+		"	smc    #0\n"
+		: "=r" (ip), "=r" (r0)
+		: "r" (r4), "r" (r5), "r" (r6)
+		: "r1", "r2", "r3", "r7", "lr");
+
+	BUG_ON(ip != SEC_EXIT_NORMAL);
+
+	return r0;
+}
+
 /* __bcm_kona_smc() should only run on CPU 0, with pre-emption disabled */
 static void __bcm_kona_smc(void *info)
 {
 	struct bcm_kona_smc_data *data = info;
-	u32 *args = bridge_data.bounce;
-	int rc = 0;
+	u32 *args = bcm_smc_buffer;
 
-	/* Must run on CPU 0 */
 	BUG_ON(smp_processor_id() != 0);
+	BUG_ON(!args);
 
-	/* Check map in the bounce area */
-	BUG_ON(!bridge_data.initialized);
-
-	/* Copy one 32 bit word into the bounce area */
-	args[0] = data->arg0;
-	args[1] = data->arg1;
-	args[2] = data->arg2;
-	args[3] = data->arg3;
+	/* Copy the four 32 bit argument values into the bounce area */
+	writel_relaxed(data->arg0, args++);
+	writel_relaxed(data->arg1, args++);
+	writel_relaxed(data->arg2, args++);
+	writel(data->arg3, args);
 
 	/* Flush caches for input data passed to Secure Monitor */
-	if (data->service_id != SSAPI_BRCM_START_VC_CORE)
-		flush_cache_all();
-
-	/* Trap into Secure Monitor */
-	rc = bcm_kona_smc_asm(data->service_id, bridge_data.buffer_addr);
+	flush_cache_all();
 
-	if (rc != SEC_ROM_RET_OK)
-		pr_err("Secure Monitor call failed (0x%x)!\n", rc);
+	/* Trap into Secure Monitor and record the request result */
+	data->result = bcm_kona_do_smc(data->service_id, bcm_smc_buffer_phys);
 }
 
 unsigned bcm_kona_smc(unsigned service_id, unsigned arg0, unsigned arg1,
@@ -106,17 +170,13 @@ unsigned bcm_kona_smc(unsigned service_id, unsigned arg0, unsigned arg1,
 	data.arg1 = arg1;
 	data.arg2 = arg2;
 	data.arg3 = arg3;
+	data.result = 0;
 
 	/*
 	 * Due to a limitation of the secure monitor, we must use the SMP
 	 * infrastructure to forward all secure monitor calls to Core 0.
 	 */
-	if (get_cpu() != 0)
-		smp_call_function_single(0, __bcm_kona_smc, (void *)&data, 1);
-	else
-		__bcm_kona_smc(&data);
+	smp_call_function_single(0, __bcm_kona_smc, &data, 1);
 
-	put_cpu();
-
-	return 0;
+	return data.result;
 }
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.h b/arch/arm/mach-bcm/bcm_kona_smc.h
index d098a7e76744..2e29ec67e414 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.h
+++ b/arch/arm/mach-bcm/bcm_kona_smc.h
@@ -15,55 +15,12 @@
 #define BCM_KONA_SMC_H
 
 #include <linux/types.h>
-#define FLAGS	(SEC_ROM_ICACHE_ENABLE_MASK | SEC_ROM_DCACHE_ENABLE_MASK | \
-			SEC_ROM_IRQ_ENABLE_MASK | SEC_ROM_FIQ_ENABLE_MASK)
 
-/*!
- * Definitions for IRQ & FIQ Mask for ARM
- */
-
-#define FIQ_IRQ_MASK						0xC0
-#define FIQ_MASK						0x40
-#define IRQ_MASK						0x80
-
-/*!
- * Secure Mode FLAGs
- */
-
-/* When set, enables ICache within the secure mode */
-#define SEC_ROM_ICACHE_ENABLE_MASK                        0x00000001
-
-/* When set, enables DCache within the secure mode */
-#define SEC_ROM_DCACHE_ENABLE_MASK                        0x00000002
-
-/* When set, enables IRQ within the secure mode */
-#define SEC_ROM_IRQ_ENABLE_MASK                           0x00000004
-
-/* When set, enables FIQ within the secure mode */
-#define SEC_ROM_FIQ_ENABLE_MASK                           0x00000008
-
-/* When set, enables Unified L2 cache within the secure mode */
-#define SEC_ROM_UL2_CACHE_ENABLE_MASK                     0x00000010
-
-/* Broadcom Secure Service API Service IDs */
-#define SSAPI_DORMANT_ENTRY_SERV                          0x01000000
-#define SSAPI_PUBLIC_OTP_SERV                             0x01000001
-#define SSAPI_ENABLE_L2_CACHE                             0x01000002
-#define SSAPI_DISABLE_L2_CACHE                            0x01000003
-#define SSAPI_WRITE_SCU_STATUS                            0x01000004
-#define SSAPI_WRITE_PWR_GATE                              0x01000005
-
-/* Broadcom Secure Service API Return Codes */
+/* Broadcom Secure Service API service IDs, return codes, and exit codes */
+#define SSAPI_ENABLE_L2_CACHE		0x01000002
 #define SEC_ROM_RET_OK			0x00000001
-#define SEC_ROM_RET_FAIL		0x00000009
-
-#define SSAPI_RET_FROM_INT_SERV		0x4
 #define SEC_EXIT_NORMAL			0x1
 
-#define SSAPI_ROW_AES			0x0E000006
-#define SSAPI_BRCM_START_VC_CORE	0x0E000008
-
-#ifndef	__ASSEMBLY__
 extern int __init bcm_kona_smc_init(void);
 
 extern unsigned bcm_kona_smc(unsigned service_id,
@@ -72,9 +29,4 @@ extern unsigned bcm_kona_smc(unsigned service_id,
 			     unsigned arg2,
 			     unsigned arg3);
 
-extern int bcm_kona_smc_asm(u32 service_id,
-			    u32 buffer_addr);
-
-#endif	/* __ASSEMBLY__ */
-
 #endif /* BCM_KONA_SMC_H */
diff --git a/arch/arm/mach-bcm/bcm_kona_smc_asm.S b/arch/arm/mach-bcm/bcm_kona_smc_asm.S
deleted file mode 100644
index a1608480d60d..000000000000
--- a/arch/arm/mach-bcm/bcm_kona_smc_asm.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/linkage.h>
-#include "bcm_kona_smc.h"
-
-/*
- * int bcm_kona_smc_asm(u32 service_id, u32 buffer_addr)
- */
-
-ENTRY(bcm_kona_smc_asm)
-	stmfd	sp!, {r4-r12, lr}
-	mov	r4, r0		@ service_id
-	mov	r5, #3		@ Keep IRQ and FIQ off in SM
-	/*
-	 * Since interrupts are disabled in the open mode, we must keep
-	 * interrupts disabled in secure mode by setting R5=0x3. If interrupts
-	 * are enabled in open mode, we can set R5=0x0 to allow interrupts in
-	 * secure mode.  If we did this, the secure monitor would return back
-	 * control to the open mode to handle the interrupt prior to completing
-	 * the secure service. If this happened, R12 would not be
-	 * SEC_EXIT_NORMAL and we would need to call SMC again after resetting
-	 * R5 (it gets clobbered by the secure monitor) and setting R4 to
-	 * SSAPI_RET_FROM_INT_SERV to indicate that we want the secure monitor
-	 * to finish up the previous uncompleted secure service.
-	 */
-	mov	r6, r1		@ buffer_addr
-	smc	#0
-	/* Check r12 for SEC_EXIT_NORMAL here if interrupts are enabled */
-	ldmfd	sp!, {r4-r12, pc}
-ENDPROC(bcm_kona_smc_asm)
diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c
new file mode 100644
index 000000000000..f0521cc0640d
--- /dev/null
+++ b/arch/arm/mach-bcm/board_bcm21664.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+
+#include "kona_l2_cache.h"
+
+#define RSTMGR_DT_STRING		"brcm,bcm21664-resetmgr"
+
+#define RSTMGR_REG_WR_ACCESS_OFFSET	0
+#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET	4
+
+#define RSTMGR_WR_PASSWORD		0xa5a5
+#define RSTMGR_WR_PASSWORD_SHIFT	8
+#define RSTMGR_WR_ACCESS_ENABLE		1
+
+static void bcm21664_restart(enum reboot_mode mode, const char *cmd)
+{
+	void __iomem *base;
+	struct device_node *resetmgr;
+
+	resetmgr = of_find_compatible_node(NULL, NULL, RSTMGR_DT_STRING);
+	if (!resetmgr) {
+		pr_emerg("Couldn't find " RSTMGR_DT_STRING "\n");
+		return;
+	}
+	base = of_iomap(resetmgr, 0);
+	if (!base) {
+		pr_emerg("Couldn't map " RSTMGR_DT_STRING "\n");
+		return;
+	}
+
+	/*
+	 * A soft reset is triggered by writing a 0 to bit 0 of the soft reset
+	 * register. To write to that register we must first write the password
+	 * and the enable bit in the write access enable register.
+	 */
+	writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) |
+		RSTMGR_WR_ACCESS_ENABLE,
+		base + RSTMGR_REG_WR_ACCESS_OFFSET);
+	writel(0, base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET);
+
+	/* Wait for reset */
+	while (1);
+}
+
+static void __init bcm21664_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL,
+		&platform_bus);
+	kona_l2_cache_init();
+}
+
+static const char * const bcm21664_dt_compat[] = {
+	"brcm,bcm21664",
+	NULL,
+};
+
+DT_MACHINE_START(BCM21664_DT, "BCM21664 Broadcom Application Processor")
+	.init_machine = bcm21664_init,
+	.restart = bcm21664_restart,
+	.dt_compat = bcm21664_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index cb3dc364405c..1ac59fc0cb15 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012-2013 Broadcom Corporation
+ * Copyright (C) 2012-2014 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -11,64 +11,65 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/of_platform.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
 #include <linux/clocksource.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/cache-l2x0.h>
 
-#include "bcm_kona_smc.h"
-#include "kona.h"
+#include "kona_l2_cache.h"
+
+#define SECWDOG_OFFSET			0x00000000
+#define SECWDOG_RESERVED_MASK		0xe2000000
+#define SECWDOG_WD_LOAD_FLAG_MASK	0x10000000
+#define SECWDOG_EN_MASK			0x08000000
+#define SECWDOG_SRSTEN_MASK		0x04000000
+#define SECWDOG_CLKS_SHIFT		20
+#define SECWDOG_COUNT_SHIFT		0
 
-static int __init kona_l2_cache_init(void)
+static void bcm281xx_restart(enum reboot_mode mode, const char *cmd)
 {
-	if (!IS_ENABLED(CONFIG_CACHE_L2X0))
-		return 0;
+	uint32_t val;
+	void __iomem *base;
+	struct device_node *np_wdog;
 
-	if (bcm_kona_smc_init() < 0) {
-		pr_info("Kona secure API not available. Skipping L2 init\n");
-		return 0;
+	np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
+	if (!np_wdog) {
+		pr_emerg("Couldn't find brcm,kona-wdt\n");
+		return;
+	}
+	base = of_iomap(np_wdog, 0);
+	if (!base) {
+		pr_emerg("Couldn't map brcm,kona-wdt\n");
+		return;
 	}
 
-	bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0);
-
-	/*
-	 * The aux_val and aux_mask have no effect since L2 cache is already
-	 * enabled.  Pass 0s for aux_val and 1s for aux_mask for default value.
-	 */
-	return l2x0_of_init(0, ~0);
-}
-
-static void bcm_board_setup_restart(void)
-{
-	struct device_node *np;
+	/* Enable watchdog with short timeout (244us). */
+	val = readl(base + SECWDOG_OFFSET);
+	val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
+	val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
+		(0x15 << SECWDOG_CLKS_SHIFT) |
+		(0x8 << SECWDOG_COUNT_SHIFT);
+	writel(val, base + SECWDOG_OFFSET);
 
-	np = of_find_compatible_node(NULL, NULL, "brcm,bcm11351");
-	if (np) {
-		if (of_device_is_available(np))
-			bcm_kona_setup_restart();
-		of_node_put(np);
-	}
-	/* Restart setup for other boards goes here */
+	/* Wait for reset */
+	while (1);
 }
 
-static void __init board_init(void)
+static void __init bcm281xx_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL,
 		&platform_bus);
-
-	bcm_board_setup_restart();
 	kona_l2_cache_init();
 }
 
-static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, };
+static const char * const bcm281xx_dt_compat[] = {
+	"brcm,bcm11351",	/* Have to use the first number upstreamed */
+	NULL,
+};
 
-DT_MACHINE_START(BCM11351_DT, "BCM281xx Broadcom Application Processor")
-	.init_machine = board_init,
-	.restart = bcm_kona_restart,
-	.dt_compat = bcm11351_dt_compat,
+DT_MACHINE_START(BCM281XX_DT, "BCM281xx Broadcom Application Processor")
+	.init_machine = bcm281xx_init,
+	.restart = bcm281xx_restart,
+	.dt_compat = bcm281xx_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
index 70f2f3925f0e..70f2f3925f0e 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona.c
deleted file mode 100644
index 6939d9017f63..000000000000
--- a/arch/arm/mach-bcm/kona.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/of_address.h>
-#include <asm/io.h>
-
-#include "kona.h"
-
-static void __iomem *watchdog_base;
-
-void bcm_kona_setup_restart(void)
-{
-	struct device_node *np_wdog;
-
-	/*
-	 * The assumption is that whoever calls bcm_kona_setup_restart()
-	 * also needs a Kona Watchdog Timer entry in Device Tree, i.e. we
-	 * report an error if the DT entry is missing.
-	 */
-	np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
-	if (!np_wdog) {
-		pr_err("brcm,kona-wdt not found in DT, reboot disabled\n");
-		return;
-	}
-	watchdog_base = of_iomap(np_wdog, 0);
-	WARN(!watchdog_base, "failed to map watchdog base");
-	of_node_put(np_wdog);
-}
-
-#define SECWDOG_OFFSET			0x00000000
-#define SECWDOG_RESERVED_MASK		0xE2000000
-#define SECWDOG_WD_LOAD_FLAG_MASK	0x10000000
-#define SECWDOG_EN_MASK			0x08000000
-#define SECWDOG_SRSTEN_MASK		0x04000000
-#define SECWDOG_CLKS_SHIFT		20
-#define SECWDOG_LOCK_SHIFT		0
-
-void bcm_kona_restart(enum reboot_mode mode, const char *cmd)
-{
-	uint32_t val;
-
-	if (!watchdog_base)
-		panic("Watchdog not mapped. Reboot failed.\n");
-
-	/* Enable watchdog2 with very short timeout. */
-	val = readl(watchdog_base + SECWDOG_OFFSET);
-	val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
-	val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
-		(0x8 << SECWDOG_CLKS_SHIFT) |
-		(0x8 << SECWDOG_LOCK_SHIFT);
-	writel(val, watchdog_base + SECWDOG_OFFSET);
-
-	while (1)
-		;
-}
diff --git a/arch/arm/mach-bcm/kona_l2_cache.c b/arch/arm/mach-bcm/kona_l2_cache.c
new file mode 100644
index 000000000000..b31970377c20
--- /dev/null
+++ b/arch/arm/mach-bcm/kona_l2_cache.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2012-2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <linux/init.h>
+#include <linux/printk.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "bcm_kona_smc.h"
+
+void __init kona_l2_cache_init(void)
+{
+	unsigned int result;
+	int ret;
+
+	ret = bcm_kona_smc_init();
+	if (ret) {
+		pr_info("Secure API not available (%d). Skipping L2 init.\n",
+			ret);
+		return;
+	}
+
+	result = bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0);
+	if (result != SEC_ROM_RET_OK) {
+		pr_err("Secure Monitor call failed (%u)! Skipping L2 init.\n",
+			result);
+		return;
+	}
+
+	/*
+	 * The aux_val and aux_mask have no effect since L2 cache is already
+	 * enabled.  Pass 0s for aux_val and 1s for aux_mask for default value.
+	 */
+	ret = l2x0_of_init(0, ~0);
+	if (ret)
+		pr_err("Couldn't enable L2 cache: %d\n", ret);
+}
diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona_l2_cache.h
index 291eca3e06ff..46f84a95ab1c 100644
--- a/arch/arm/mach-bcm/kona.h
+++ b/arch/arm/mach-bcm/kona_l2_cache.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2013 Broadcom Corporation
+ * Copyright (C) 2012-2014 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -11,7 +11,8 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/reboot.h>
-
-void bcm_kona_setup_restart(void);
-void bcm_kona_restart(enum reboot_mode mode, const char *cmd);
+#ifdef CONFIG_ARCH_BCM_MOBILE_L2_CACHE
+void	kona_l2_cache_init(void);
+#else
+#define kona_l2_cache_init() ((void)0)
+#endif
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
deleted file mode 100644
index d1f9612f8c15..000000000000
--- a/arch/arm/mach-bcm2835/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-config ARCH_BCM2835
-	bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select ARM_ERRATA_411920
-	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
-	select CLKSRC_OF
-	select CPU_V6
-	select GENERIC_CLOCKEVENTS
-	select PINCTRL
-	select PINCTRL_BCM2835
-	help
-	  This enables support for the Broadcom BCM2835 SoC. This SoC is
-	  used in the Raspberry Pi and Roku 2 devices.
diff --git a/arch/arm/mach-bcm2835/Makefile b/arch/arm/mach-bcm2835/Makefile
deleted file mode 100644
index 4c3892fe02c3..000000000000
--- a/arch/arm/mach-bcm2835/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += bcm2835.o
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 7a02d222c378..101e0f356730 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -1,11 +1,11 @@
 config ARCH_BERLIN
 	bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
+	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select COMMON_CLK
 	select DW_APB_ICTL
 	select DW_APB_TIMER_OF
+	select PINCTRL
 
 if ARCH_BERLIN
 
@@ -16,13 +16,19 @@ config MACH_BERLIN_BG2
 	select CACHE_L2X0
 	select CPU_PJ4B
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
+	select PINCTRL_BERLIN_BG2
 
 config MACH_BERLIN_BG2CD
 	bool "Marvell Armada 1500-mini (BG2CD)"
 	select CACHE_L2X0
-	select CPU_V7
 	select HAVE_ARM_TWD if SMP
+	select PINCTRL_BERLIN_BG2CD
+
+config MACH_BERLIN_BG2Q
+	bool "Marvell Armada 1500 Pro (BG2-Q)"
+	select CACHE_L2X0
+	select HAVE_ARM_TWD if SMP
+	select PINCTRL_BERLIN_BG2Q
 
 endmenu
 
diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c
index 025bcb5473eb..ac181c6797ee 100644
--- a/arch/arm/mach-berlin/berlin.c
+++ b/arch/arm/mach-berlin/berlin.c
@@ -18,16 +18,6 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 
-static void __init berlin_init_machine(void)
-{
-	/*
-	 * with DT probing for L2CCs, berlin_init_machine can be removed.
-	 * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc
-	 */
-	l2x0_of_init(0x70c00000, 0xfeffffff);
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char * const berlin_dt_compat[] = {
 	"marvell,berlin",
 	NULL,
@@ -35,5 +25,10 @@ static const char * const berlin_dt_compat[] = {
 
 DT_MACHINE_START(BERLIN_DT, "Marvell Berlin")
 	.dt_compat	= berlin_dt_compat,
-	.init_machine	= berlin_init_machine,
+	/*
+	 * with DT probing for L2CCs, berlin_init_machine can be removed.
+	 * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc
+	 */
+	.l2c_aux_val	= 0x30c00000,
+	.l2c_aux_mask	= 0xfeffffff,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index bea6295c8c59..f711498c180c 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -33,20 +33,6 @@ config ARCH_P720T
 	  Say Y here if you intend to run this kernel on the ARM Prospector
 	  720T.
 
-config EP72XX_ROM_BOOT
-	bool "EP721x/EP731x ROM boot"
-	help
-	  If you say Y here, your CLPS711x-based kernel will use the bootstrap
-	  mode memory map instead of the normal memory map.
-
-	  Processors derived from the Cirrus CLPS711X core support two boot
-	  modes.  Normal mode boots from the external memory device at CS0.
-	  Bootstrap mode rearranges parts of the memory map, placing an
-	  internal 128 byte bootstrap ROM at CS0.  This option performs the
-	  address map changes required to support booting in this mode.
-
-	  You almost surely want to say N here.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index f8d71a89644a..d62ca16d5394 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -73,7 +73,7 @@
 #define AUTCPU12_SMC_NCE	(AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */
 #define AUTCPU12_SMC_RDY	CLPS711X_GPIO(1, 2)
 #define AUTCPU12_SMC_ALE	CLPS711X_GPIO(1, 3)
-#define AUTCPU12_SMC_CLE	CLPS711X_GPIO(1, 3)
+#define AUTCPU12_SMC_CLE	CLPS711X_GPIO(1, 4)
 
 /* LCD contrast digital potentiometer */
 #define AUTCPU12_DPOT_CS	CLPS711X_GPIO(4, 0)
@@ -265,14 +265,12 @@ static void __init autcpu12_init_late(void)
 MACHINE_START(AUTCPU12, "autronix autcpu12")
 	/* Maintainer: Thomas Gleixner */
 	.atag_offset	= 0x20000,
-	.nr_irqs	= CLPS711X_NR_IRQS,
 	.map_io		= clps711x_map_io,
 	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= autcpu12_init,
 	.init_late	= autcpu12_init_late,
-	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
index a9e38c6bcfb4..e261a47f2aff 100644
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ b/arch/arm/mach-clps711x/board-cdb89712.c
@@ -139,12 +139,10 @@ static void __init cdb89712_init(void)
 MACHINE_START(CDB89712, "Cirrus-CDB89712")
 	/* Maintainer: Ray Lehtiniemi */
 	.atag_offset	= 0x100,
-	.nr_irqs	= CLPS711X_NR_IRQS,
 	.map_io		= clps711x_map_io,
 	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= cdb89712_init,
-	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c
index b4764246d0f8..94a7add88a3f 100644
--- a/arch/arm/mach-clps711x/board-clep7312.c
+++ b/arch/arm/mach-clps711x/board-clep7312.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/string.h>
+#include <linux/memblock.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -26,22 +27,18 @@
 #include "common.h"
 
 static void __init
-fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi)
+fixup_clep7312(struct tag *tags, char **cmdline)
 {
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xc0000000;
-	mi->bank[0].size = 0x01000000;
+	memblock_add(0xc0000000, 0x01000000);
 }
 
 MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
 	/* Maintainer: Nobody */
 	.atag_offset	= 0x0100,
-	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_clep7312,
 	.map_io		= clps711x_map_io,
 	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
-	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index fe6184ead896..f9828f89972a 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/backlight.h>
 #include <linux/platform_device.h>
+#include <linux/memblock.h>
 
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
@@ -133,7 +134,7 @@ static void __init edb7211_reserve(void)
 }
 
 static void __init
-fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
+fixup_edb7211(struct tag *tags, char **cmdline)
 {
 	/*
 	 * Bank start addresses are not present in the information
@@ -143,11 +144,8 @@ fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
 	 * Banks sizes _are_ present in the param block, but we're
 	 * not using that information yet.
 	 */
-	mi->bank[0].start = 0xc0000000;
-	mi->bank[0].size = SZ_8M;
-	mi->bank[1].start = 0xc1000000;
-	mi->bank[1].size = SZ_8M;
-	mi->nr_banks = 2;
+	memblock_add(0xc0000000, SZ_8M);
+	memblock_add(0xc1000000, SZ_8M);
 }
 
 static void __init edb7211_init(void)
@@ -177,7 +175,6 @@ static void __init edb7211_init_late(void)
 MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	/* Maintainer: Jon McClintock */
 	.atag_offset	= VIDEORAM_SIZE + 0x100,
-	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_edb7211,
 	.reserve	= edb7211_reserve,
 	.map_io		= clps711x_map_io,
@@ -186,6 +183,5 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.init_time	= clps711x_timer_init,
 	.init_machine	= edb7211_init,
 	.init_late	= edb7211_init_late,
-	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index dd81b06f68fe..0cf0e51e6546 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -295,7 +295,7 @@ static struct generic_bl_info p720t_lcd_backlight_pdata = {
 };
 
 static void __init
-fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi)
+fixup_p720t(struct tag *tag, char **cmdline)
 {
 	/*
 	 * Our bootloader doesn't setup any tags (yet).
@@ -363,7 +363,6 @@ static void __init p720t_init_late(void)
 MACHINE_START(P720T, "ARM-Prospector720T")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.atag_offset	= 0x100,
-	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_p720t,
 	.map_io		= clps711x_map_io,
 	.init_early	= clps711x_init_early,
@@ -371,6 +370,5 @@ MACHINE_START(P720T, "ARM-Prospector720T")
 	.init_time	= clps711x_timer_init,
 	.init_machine	= p720t_init,
 	.init_late	= p720t_init_late,
-	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index a1935911e4f1..aee81fa46ccf 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -31,14 +31,14 @@
 #include <linux/clk-provider.h>
 #include <linux/sched_clock.h>
 
-#include <asm/exception.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
 #include <mach/hardware.h>
 
+#include "common.h"
+
 static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh,
 		  *clk_tint, *clk_spi;
 
@@ -59,204 +59,9 @@ void __init clps711x_map_io(void)
 	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
 }
 
-static void int1_mask(struct irq_data *d)
-{
-	u32 intmr1;
-
-	intmr1 = clps_readl(INTMR1);
-	intmr1 &= ~(1 << d->irq);
-	clps_writel(intmr1, INTMR1);
-}
-
-static void int1_eoi(struct irq_data *d)
-{
-	switch (d->irq) {
-	case IRQ_CSINT:  clps_writel(0, COEOI);  break;
-	case IRQ_TC1OI:  clps_writel(0, TC1EOI); break;
-	case IRQ_TC2OI:  clps_writel(0, TC2EOI); break;
-	case IRQ_RTCMI:  clps_writel(0, RTCEOI); break;
-	case IRQ_TINT:   clps_writel(0, TEOI);   break;
-	case IRQ_UMSINT: clps_writel(0, UMSEOI); break;
-	}
-}
-
-static void int1_unmask(struct irq_data *d)
-{
-	u32 intmr1;
-
-	intmr1 = clps_readl(INTMR1);
-	intmr1 |= 1 << d->irq;
-	clps_writel(intmr1, INTMR1);
-}
-
-static struct irq_chip int1_chip = {
-	.name		= "Interrupt Vector 1",
-	.irq_eoi	= int1_eoi,
-	.irq_mask	= int1_mask,
-	.irq_unmask	= int1_unmask,
-};
-
-static void int2_mask(struct irq_data *d)
-{
-	u32 intmr2;
-
-	intmr2 = clps_readl(INTMR2);
-	intmr2 &= ~(1 << (d->irq - 16));
-	clps_writel(intmr2, INTMR2);
-}
-
-static void int2_eoi(struct irq_data *d)
-{
-	switch (d->irq) {
-	case IRQ_KBDINT: clps_writel(0, KBDEOI); break;
-	}
-}
-
-static void int2_unmask(struct irq_data *d)
-{
-	u32 intmr2;
-
-	intmr2 = clps_readl(INTMR2);
-	intmr2 |= 1 << (d->irq - 16);
-	clps_writel(intmr2, INTMR2);
-}
-
-static struct irq_chip int2_chip = {
-	.name		= "Interrupt Vector 2",
-	.irq_eoi	= int2_eoi,
-	.irq_mask	= int2_mask,
-	.irq_unmask	= int2_unmask,
-};
-
-static void int3_mask(struct irq_data *d)
-{
-	u32 intmr3;
-
-	intmr3 = clps_readl(INTMR3);
-	intmr3 &= ~(1 << (d->irq - 32));
-	clps_writel(intmr3, INTMR3);
-}
-
-static void int3_unmask(struct irq_data *d)
-{
-	u32 intmr3;
-
-	intmr3 = clps_readl(INTMR3);
-	intmr3 |= 1 << (d->irq - 32);
-	clps_writel(intmr3, INTMR3);
-}
-
-static struct irq_chip int3_chip = {
-	.name		= "Interrupt Vector 3",
-	.irq_mask	= int3_mask,
-	.irq_unmask	= int3_unmask,
-};
-
-static struct {
-	int			nr;
-	struct irq_chip		*chip;
-	irq_flow_handler_t	handle;
-} clps711x_irqdescs[] __initdata = {
-	{ IRQ_CSINT,	&int1_chip,	handle_fasteoi_irq,	},
-	{ IRQ_EINT1,	&int1_chip,	handle_level_irq,	},
-	{ IRQ_EINT2,	&int1_chip,	handle_level_irq,	},
-	{ IRQ_EINT3,	&int1_chip,	handle_level_irq,	},
-	{ IRQ_TC1OI,	&int1_chip,	handle_fasteoi_irq,	},
-	{ IRQ_TC2OI,	&int1_chip,	handle_fasteoi_irq,	},
-	{ IRQ_RTCMI,	&int1_chip,	handle_fasteoi_irq,	},
-	{ IRQ_TINT,	&int1_chip,	handle_fasteoi_irq,	},
-	{ IRQ_UTXINT1,	&int1_chip,	handle_level_irq,	},
-	{ IRQ_URXINT1,	&int1_chip,	handle_level_irq,	},
-	{ IRQ_UMSINT,	&int1_chip,	handle_fasteoi_irq,	},
-	{ IRQ_SSEOTI,	&int1_chip,	handle_level_irq,	},
-	{ IRQ_KBDINT,	&int2_chip,	handle_fasteoi_irq,	},
-	{ IRQ_SS2RX,	&int2_chip,	handle_level_irq,	},
-	{ IRQ_SS2TX,	&int2_chip,	handle_level_irq,	},
-	{ IRQ_UTXINT2,	&int2_chip,	handle_level_irq,	},
-	{ IRQ_URXINT2,	&int2_chip,	handle_level_irq,	},
-};
-
 void __init clps711x_init_irq(void)
 {
-	unsigned int i;
-
-	/* Disable interrupts */
-	clps_writel(0, INTMR1);
-	clps_writel(0, INTMR2);
-	clps_writel(0, INTMR3);
-
-	/* Clear down any pending interrupts */
-	clps_writel(0, BLEOI);
-	clps_writel(0, MCEOI);
-	clps_writel(0, COEOI);
-	clps_writel(0, TC1EOI);
-	clps_writel(0, TC2EOI);
-	clps_writel(0, RTCEOI);
-	clps_writel(0, TEOI);
-	clps_writel(0, UMSEOI);
-	clps_writel(0, KBDEOI);
-	clps_writel(0, SRXEOF);
-	clps_writel(0xffffffff, DAISR);
-
-	for (i = 0; i < ARRAY_SIZE(clps711x_irqdescs); i++) {
-		irq_set_chip_and_handler(clps711x_irqdescs[i].nr,
-					 clps711x_irqdescs[i].chip,
-					 clps711x_irqdescs[i].handle);
-		set_irq_flags(clps711x_irqdescs[i].nr,
-			      IRQF_VALID | IRQF_PROBE);
-	}
-
-	if (IS_ENABLED(CONFIG_FIQ)) {
-		init_FIQ(0);
-		irq_set_chip_and_handler(IRQ_DAIINT, &int3_chip,
-					 handle_bad_irq);
-		set_irq_flags(IRQ_DAIINT,
-			      IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
-	}
-}
-
-static inline u32 fls16(u32 x)
-{
-	u32 r = 15;
-
-	if (!(x & 0xff00)) {
-		x <<= 8;
-		r -= 8;
-	}
-	if (!(x & 0xf000)) {
-		x <<= 4;
-		r -= 4;
-	}
-	if (!(x & 0xc000)) {
-		x <<= 2;
-		r -= 2;
-	}
-	if (!(x & 0x8000))
-		r--;
-
-	return r;
-}
-
-asmlinkage void __exception_irq_entry clps711x_handle_irq(struct pt_regs *regs)
-{
-	do {
-		u32 irqstat;
-		void __iomem *base = CLPS711X_VIRT_BASE;
-
-		irqstat = readw_relaxed(base + INTSR1) &
-			  readw_relaxed(base + INTMR1);
-		if (irqstat)
-			handle_IRQ(fls16(irqstat), regs);
-
-		irqstat = readw_relaxed(base + INTSR2) &
-			  readw_relaxed(base + INTMR2);
-		if (irqstat) {
-			handle_IRQ(fls16(irqstat) + 16, regs);
-			continue;
-		}
-
-		break;
-	} while (1);
+	clps711x_intc_init(CLPS711X_PHYS_BASE, SZ_16K);
 }
 
 static u64 notrace clps711x_sched_clock_read(void)
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
index 9a6767bfdc47..7489139d5d63 100644
--- a/arch/arm/mach-clps711x/common.h
+++ b/arch/arm/mach-clps711x/common.h
@@ -6,13 +6,14 @@
 
 #include <linux/reboot.h>
 
-#define CLPS711X_NR_IRQS	(33)
 #define CLPS711X_NR_GPIO	(4 * 8 + 3)
 #define CLPS711X_GPIO(prt, bit)	((prt) * 8 + (bit))
 
 extern void clps711x_map_io(void);
 extern void clps711x_init_irq(void);
 extern void clps711x_timer_init(void);
-extern void clps711x_handle_irq(struct pt_regs *regs);
 extern void clps711x_restart(enum reboot_mode mode, const char *cmd);
 extern void clps711x_init_early(void);
+
+/* drivers/irqchip/irq-clps711x.c */
+void clps711x_intc_init(phys_addr_t, resource_size_t);
diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h
index 0286f4bf9945..eb052a11aa9d 100644
--- a/arch/arm/mach-clps711x/include/mach/clps711x.h
+++ b/arch/arm/mach-clps711x/include/mach/clps711x.h
@@ -40,8 +40,6 @@
 #define MEMCFG1		(0x0180)
 #define MEMCFG2		(0x01c0)
 #define DRFPR		(0x0200)
-#define INTSR1		(0x0240)
-#define INTMR1		(0x0280)
 #define LCDCON		(0x02c0)
 #define TC1D		(0x0300)
 #define TC2D		(0x0340)
@@ -55,28 +53,16 @@
 #define PALLSW		(0x0540)
 #define PALMSW		(0x0580)
 #define STFCLR		(0x05c0)
-#define BLEOI		(0x0600)
-#define MCEOI		(0x0640)
-#define TEOI		(0x0680)
-#define TC1EOI		(0x06c0)
-#define TC2EOI		(0x0700)
-#define RTCEOI		(0x0740)
-#define UMSEOI		(0x0780)
-#define COEOI		(0x07c0)
 #define HALT		(0x0800)
 #define STDBY		(0x0840)
 
 #define FBADDR		(0x1000)
 #define SYSCON2		(0x1100)
 #define SYSFLG2		(0x1140)
-#define INTSR2		(0x1240)
-#define INTMR2		(0x1280)
 #define UARTDR2		(0x1480)
 #define UBRLCR2		(0x14c0)
 #define SS2DR		(0x1500)
-#define SRXEOF		(0x1600)
 #define SS2POP		(0x16c0)
-#define KBDEOI		(0x1700)
 
 #define DAIR		(0x2000)
 #define DAIDR0		(0x2040)
@@ -84,8 +70,6 @@
 #define DAIDR2		(0x20c0)
 #define DAISR		(0x2100)
 #define SYSCON3		(0x2200)
-#define INTSR3		(0x2240)
-#define INTMR3		(0x2280)
 #define LEDFLSH		(0x22c0)
 #define SDCONF		(0x2300)
 #define SDRFPR		(0x2340)
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index c5a8ea6839ef..5d6afda1c0e8 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -38,13 +38,6 @@
 #define clps_writel(val,off)	writel(val, CLPS711X_VIRT_BASE + (off))
 #endif
 
-/*
- * The physical addresses that the external chip select signals map to is
- * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
- * processors.  CONFIG_EP72XX_BOOT_ROM is only available if these
- * processors are in use.
- */
-#ifndef CONFIG_EP72XX_ROM_BOOT
 #define CS0_PHYS_BASE		(0x00000000)
 #define CS1_PHYS_BASE		(0x10000000)
 #define CS2_PHYS_BASE		(0x20000000)
@@ -53,16 +46,6 @@
 #define CS5_PHYS_BASE		(0x50000000)
 #define CS6_PHYS_BASE		(0x60000000)
 #define CS7_PHYS_BASE		(0x70000000)
-#else
-#define CS0_PHYS_BASE		(0x70000000)
-#define CS1_PHYS_BASE		(0x60000000)
-#define CS2_PHYS_BASE		(0x50000000)
-#define CS3_PHYS_BASE		(0x40000000)
-#define CS4_PHYS_BASE		(0x30000000)
-#define CS5_PHYS_BASE		(0x20000000)
-#define CS6_PHYS_BASE		(0x10000000)
-#define CS7_PHYS_BASE		(0x00000000)
-#endif
 
 #define CLPS711X_SRAM_BASE	CS6_PHYS_BASE
 #define CLPS711X_SRAM_SIZE	(48 * 1024)
diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h
deleted file mode 100644
index de6fd192d1c3..000000000000
--- a/arch/arm/mach-clps711x/include/mach/timex.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* Bogus value */
-#define CLOCK_TICK_RATE 512000
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index dbf0df8bb0ac..66838f42037f 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -1,10 +1,6 @@
 config ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
 	select ARM_GIC
-	select CPU_V6K
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_CACHE_L2X0
-	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	help
 	  Support for Cavium Networks CNS3XXX platform.
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index ce096d678aa4..d863d8729edc 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -246,7 +246,6 @@ static void __init cns3420_map_io(void)
 
 MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
 	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_CNS3XXX,
 	.map_io		= cns3420_map_io,
 	.init_irq	= cns3xxx_init_irq,
 	.init_time	= cns3xxx_timer_init,
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index e38b279f402c..f85449a6accd 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -47,6 +47,38 @@ static struct map_desc cns3xxx_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(CNS3XXX_PM_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+#ifdef CONFIG_PCI
+	}, {
+		.virtual	= CNS3XXX_PCIE0_HOST_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_PCIE0_CFG0_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
+		.length		= SZ_64K, /* really 4 KiB at offset 32 KiB */
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_PCIE0_CFG1_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_PCIE1_HOST_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_PCIE1_CFG0_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
+		.length		= SZ_64K, /* really 4 KiB at offset 32 KiB */
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_PCIE1_CFG1_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE,
+#endif
 	},
 };
 
@@ -155,7 +187,7 @@ static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction cns3xxx_timer_irq = {
 	.name		= "timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= cns3xxx_timer_interrupt,
 };
 
@@ -240,9 +272,9 @@ void __init cns3xxx_l2x0_init(void)
 	 *
 	 * 1 cycle of latency for setup, read and write accesses
 	 */
-	val = readl(base + L2X0_TAG_LATENCY_CTRL);
+	val = readl(base + L310_TAG_LATENCY_CTRL);
 	val &= 0xfffff888;
-	writel(val, base + L2X0_TAG_LATENCY_CTRL);
+	writel(val, base + L310_TAG_LATENCY_CTRL);
 
 	/*
 	 * Data RAM Control register
@@ -253,12 +285,12 @@ void __init cns3xxx_l2x0_init(void)
 	 *
 	 * 1 cycle of latency for setup, read and write accesses
 	 */
-	val = readl(base + L2X0_DATA_LATENCY_CTRL);
+	val = readl(base + L310_DATA_LATENCY_CTRL);
 	val &= 0xfffff888;
-	writel(val, base + L2X0_DATA_LATENCY_CTRL);
+	writel(val, base + L310_DATA_LATENCY_CTRL);
 
 	/* 32 KiB, 8-way, parity disable */
-	l2x0_init(base, 0x00540000, 0xfe000fff);
+	l2x0_init(base, 0x00500000, 0xfe0f0fff);
 }
 
 #endif /* CONFIG_CACHE_L2X0 */
@@ -368,7 +400,6 @@ static const char *cns3xxx_dt_compat[] __initdata = {
 
 DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx")
 	.dt_compat	= cns3xxx_dt_compat,
-	.nr_irqs	= NR_IRQS_CNS3XXX,
 	.map_io		= cns3xxx_map_io,
 	.init_irq	= cns3xxx_init_irq,
 	.init_time	= cns3xxx_timer_init,
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
index c7b204bff386..413134c54452 100644
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -23,15 +23,10 @@
 #include "cns3xxx.h"
 #include "core.h"
 
-enum cns3xxx_access_type {
-	CNS3XXX_HOST_TYPE = 0,
-	CNS3XXX_CFG0_TYPE,
-	CNS3XXX_CFG1_TYPE,
-	CNS3XXX_NUM_ACCESS_TYPES,
-};
-
 struct cns3xxx_pcie {
-	struct map_desc cfg_bases[CNS3XXX_NUM_ACCESS_TYPES];
+	void __iomem *host_regs; /* PCI config registers for host bridge */
+	void __iomem *cfg0_regs; /* PCI Type 0 config registers */
+	void __iomem *cfg1_regs; /* PCI Type 1 config registers */
 	unsigned int irqs[2];
 	struct resource res_io;
 	struct resource res_mem;
@@ -66,7 +61,6 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
 	int busno = bus->number;
 	int slot = PCI_SLOT(devfn);
 	int offset;
-	enum cns3xxx_access_type type;
 	void __iomem *base;
 
 	/* If there is no link, just show the CNS PCI bridge. */
@@ -78,17 +72,21 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
 	 * we still want to access it. For this to work, we must place
 	 * the first device on the same bus as the CNS PCI bridge.
 	 */
-	if (busno == 0) {
-		if (slot > 1)
-			return NULL;
-		type = slot;
-	} else {
-		type = CNS3XXX_CFG1_TYPE;
-	}
+	if (busno == 0) { /* directly connected PCIe bus */
+		switch (slot) {
+		case 0: /* host bridge device, function 0 only */
+			base = cnspci->host_regs;
+			break;
+		case 1: /* directly connected device */
+			base = cnspci->cfg0_regs;
+			break;
+		default:
+			return NULL; /* no such device */
+		}
+	} else /* remote PCI bus */
+		base = cnspci->cfg1_regs;
 
-	base = (void __iomem *)cnspci->cfg_bases[type].virtual;
 	offset = ((busno & 0xf) << 20) | (devfn << 12) | (where & 0xffc);
-
 	return base + offset;
 }
 
@@ -180,36 +178,19 @@ static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 static struct cns3xxx_pcie cns3xxx_pcie[] = {
 	[0] = {
-		.cfg_bases = {
-			[CNS3XXX_HOST_TYPE] = {
-				.virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-			[CNS3XXX_CFG0_TYPE] = {
-				.virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-			[CNS3XXX_CFG1_TYPE] = {
-				.virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-		},
+		.host_regs = (void __iomem *)CNS3XXX_PCIE0_HOST_BASE_VIRT,
+		.cfg0_regs = (void __iomem *)CNS3XXX_PCIE0_CFG0_BASE_VIRT,
+		.cfg1_regs = (void __iomem *)CNS3XXX_PCIE0_CFG1_BASE_VIRT,
 		.res_io = {
 			.name = "PCIe0 I/O space",
 			.start = CNS3XXX_PCIE0_IO_BASE,
-			.end = CNS3XXX_PCIE0_IO_BASE + SZ_16M - 1,
+			.end = CNS3XXX_PCIE0_CFG0_BASE - 1, /* 16 MiB */
 			.flags = IORESOURCE_IO,
 		},
 		.res_mem = {
 			.name = "PCIe0 non-prefetchable",
 			.start = CNS3XXX_PCIE0_MEM_BASE,
-			.end = CNS3XXX_PCIE0_MEM_BASE + SZ_16M - 1,
+			.end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */
 			.flags = IORESOURCE_MEM,
 		},
 		.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
@@ -222,36 +203,19 @@ static struct cns3xxx_pcie cns3xxx_pcie[] = {
 		},
 	},
 	[1] = {
-		.cfg_bases = {
-			[CNS3XXX_HOST_TYPE] = {
-				.virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-			[CNS3XXX_CFG0_TYPE] = {
-				.virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-			[CNS3XXX_CFG1_TYPE] = {
-				.virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-		},
+		.host_regs = (void __iomem *)CNS3XXX_PCIE1_HOST_BASE_VIRT,
+		.cfg0_regs = (void __iomem *)CNS3XXX_PCIE1_CFG0_BASE_VIRT,
+		.cfg1_regs = (void __iomem *)CNS3XXX_PCIE1_CFG1_BASE_VIRT,
 		.res_io = {
 			.name = "PCIe1 I/O space",
 			.start = CNS3XXX_PCIE1_IO_BASE,
-			.end = CNS3XXX_PCIE1_IO_BASE + SZ_16M - 1,
+			.end = CNS3XXX_PCIE1_CFG0_BASE - 1, /* 16 MiB */
 			.flags = IORESOURCE_IO,
 		},
 		.res_mem = {
 			.name = "PCIe1 non-prefetchable",
 			.start = CNS3XXX_PCIE1_MEM_BASE,
-			.end = CNS3XXX_PCIE1_MEM_BASE + SZ_16M - 1,
+			.end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */
 			.flags = IORESOURCE_MEM,
 		},
 		.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
@@ -307,18 +271,15 @@ static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
 		.ops = &cns3xxx_pcie_ops,
 		.sysdata = &sd,
 	};
-	u32 io_base = cnspci->res_io.start >> 16;
-	u32 mem_base = cnspci->res_mem.start >> 16;
-	u32 host_base = cnspci->cfg_bases[CNS3XXX_HOST_TYPE].pfn;
-	u32 cfg0_base = cnspci->cfg_bases[CNS3XXX_CFG0_TYPE].pfn;
+	u16 mem_base  = cnspci->res_mem.start >> 16;
+	u16 mem_limit = cnspci->res_mem.end   >> 16;
+	u16 io_base   = cnspci->res_io.start  >> 16;
+	u16 io_limit  = cnspci->res_io.end    >> 16;
 	u32 devfn = 0;
 	u8 tmp8;
 	u16 pos;
 	u16 dc;
 
-	host_base = (__pfn_to_phys(host_base) - 1) >> 16;
-	cfg0_base = (__pfn_to_phys(cfg0_base) - 1) >> 16;
-
 	pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0);
 	pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1);
 	pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1);
@@ -328,9 +289,9 @@ static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
 	pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8);
 
 	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base);
-	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, host_base);
+	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, mem_limit);
 	pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base);
-	pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, cfg0_base);
+	pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, io_limit);
 
 	if (!cnspci->linked)
 		return;
@@ -368,8 +329,6 @@ static int __init cns3xxx_pcie_init(void)
 			"imprecise external abort");
 
 	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
-		iotable_init(cns3xxx_pcie[i].cfg_bases,
-			     ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases));
 		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
 		cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
 		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index a075b3e0c5c7..db18ef866593 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -51,11 +51,6 @@ config ARCH_DAVINCI_DM365
 	select AINTC
 	select ARCH_DAVINCI_DMx
 
-config ARCH_DAVINCI_TNETV107X
-	bool "TNETV107X based system"
-	select CPU_V6
-	select CP_INTC
-
 comment "DaVinci Board Type"
 
 config MACH_DA8XX_DT
@@ -214,18 +209,6 @@ config DA850_WL12XX
 	  Say Y if you want to use a wl1271 expansion card connected to the
 	  AM18x EVM.
 
-config GPIO_PCA953X
-	default MACH_DAVINCI_DA850_EVM
-
-config KEYBOARD_GPIO_POLLED
-	default MACH_DAVINCI_DA850_EVM
-
-config MACH_TNETV107X
-	bool "TI TNETV107X Reference Platform"
-	default ARCH_DAVINCI_TNETV107X
-	depends on ARCH_DAVINCI_TNETV107X
-	help
-	  Say Y here to select the TI TNETV107X Evaluation Module.
 
 config MACH_MITYOMAPL138
 	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 63997a1128e6..2204239ed243 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
 obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += tnetv107x.o devices-tnetv107x.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
@@ -32,7 +31,6 @@ obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o cdce949.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
-obj-$(CONFIG_MACH_TNETV107X)		+= board-tnetv107x-evm.o
 obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
 obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
 
diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot
index 04a6c4e67b14..4b81601754a2 100644
--- a/arch/arm/mach-davinci/Makefile.boot
+++ b/arch/arm/mach-davinci/Makefile.boot
@@ -1,13 +1,7 @@
-ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
-ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
-$(error Cannot enable DaVinci and DA8XX platforms concurrently)
-else
-   zreladdr-y	+= 0xc0008000
-params_phys-y	:= 0xc0000100
-initrd_phys-y	:= 0xc0800000
-endif
-else
-   zreladdr-y	+= 0x80008000
-params_phys-y	:= 0x80000100
-initrd_phys-y	:= 0x80800000
-endif
+zreladdr-$(CONFIG_ARCH_DAVINCI_DA8XX)		+= 0xc0008000
+params_phys-$(CONFIG_ARCH_DAVINCI_DA8XX)	:= 0xc0000100
+initrd_phys-$(CONFIG_ARCH_DAVINCI_DA8XX)	:= 0xc0800000
+
+zreladdr-$(CONFIG_ARCH_DAVINCI_DMx)		+= 0x80008000
+params_phys-$(CONFIG_ARCH_DAVINCI_DMx)		:= 0x80000100
+initrd_phys-$(CONFIG_ARCH_DAVINCI_DMx)		:= 0x80800000
diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c
index f091a9010c2f..ff8b7e76b6e9 100644
--- a/arch/arm/mach-davinci/aemif.c
+++ b/arch/arm/mach-davinci/aemif.c
@@ -16,6 +16,7 @@
 #include <linux/time.h>
 
 #include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
 
 /* Timing value configuration */
 
@@ -43,6 +44,17 @@
 				WSTROBE(WSTROBE_MAX) | \
 				WSETUP(WSETUP_MAX))
 
+static inline unsigned int davinci_aemif_readl(void __iomem *base, int offset)
+{
+	return readl_relaxed(base + offset);
+}
+
+static inline void davinci_aemif_writel(void __iomem *base,
+					int offset, unsigned long value)
+{
+	writel_relaxed(value, base + offset);
+}
+
 /*
  * aemif_calc_rate - calculate timing data.
  * @wanted: The cycle time needed in nanoseconds.
@@ -76,6 +88,7 @@ static int aemif_calc_rate(int wanted, unsigned long clk, int max)
  * @t: timing values to be progammed
  * @base: The virtual base address of the AEMIF interface
  * @cs: chip-select to program the timing values for
+ * @clkrate: the AEMIF clkrate
  *
  * This function programs the given timing values (in real clock) into the
  * AEMIF registers taking the AEMIF clock into account.
@@ -86,24 +99,17 @@ static int aemif_calc_rate(int wanted, unsigned long clk, int max)
  *
  * Returns 0 on success, else negative errno.
  */
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
-					void __iomem *base, unsigned cs)
+static int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
+					void __iomem *base, unsigned cs,
+					unsigned long clkrate)
 {
 	unsigned set, val;
 	int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
 	unsigned offset = A1CR_OFFSET + cs * 4;
-	struct clk *aemif_clk;
-	unsigned long clkrate;
 
 	if (!t)
 		return 0;	/* Nothing to do */
 
-	aemif_clk = clk_get(NULL, "aemif");
-	if (IS_ERR(aemif_clk))
-		return PTR_ERR(aemif_clk);
-
-	clkrate = clk_get_rate(aemif_clk);
-
 	clkrate /= 1000;	/* turn clock into kHz for ease of use */
 
 	ta	= aemif_calc_rate(t->ta, clkrate, TA_MAX);
@@ -130,4 +136,83 @@ int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
 
 	return 0;
 }
-EXPORT_SYMBOL(davinci_aemif_setup_timing);
+
+/**
+ * davinci_aemif_setup - setup AEMIF interface by davinci_nand_pdata
+ * @pdev - link to platform device to setup settings for
+ *
+ * This function does not use any locking while programming the AEMIF
+ * because it is expected that there is only one user of a given
+ * chip-select.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int davinci_aemif_setup(struct platform_device *pdev)
+{
+	struct davinci_nand_pdata *pdata = dev_get_platdata(&pdev->dev);
+	uint32_t val;
+	unsigned long clkrate;
+	struct resource	*res;
+	void __iomem *base;
+	struct clk *clk;
+	int ret = 0;
+
+	clk = clk_get(&pdev->dev, "aemif");
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
+			ret);
+		goto err_put;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot get IORESOURCE_MEM\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	base = ioremap(res->start, resource_size(res));
+	if (!base) {
+		dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	/*
+	 * Setup Async configuration register in case we did not boot
+	 * from NAND and so bootloader did not bother to set it up.
+	 */
+	val = davinci_aemif_readl(base, A1CR_OFFSET + pdev->id * 4);
+	/*
+	 * Extended Wait is not valid and Select Strobe mode is not
+	 * used
+	 */
+	val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK);
+	if (pdata->options & NAND_BUSWIDTH_16)
+		val |= 0x1;
+
+	davinci_aemif_writel(base, A1CR_OFFSET + pdev->id * 4, val);
+
+	clkrate = clk_get_rate(clk);
+
+	if (pdata->timing)
+		ret = davinci_aemif_setup_timing(pdata->timing, base, pdev->id,
+						 clkrate);
+
+	if (ret < 0)
+		dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
+
+	iounmap(base);
+err:
+	clk_disable_unprepare(clk);
+err_put:
+	clk_put(clk);
+	return ret;
+}
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index d1f45af7a530..5623131c4f0b 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -419,6 +419,9 @@ static inline void da830_evm_init_nand(int mux_mode)
 	if (ret)
 		pr_warning("da830_evm_init: NAND device not registered.\n");
 
+	if (davinci_aemif_setup(&da830_evm_nand_device))
+		pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+
 	gpio_direction_output(mux_mode, 1);
 }
 #else
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index e0af0eccde8f..234c5bb091f5 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -358,6 +358,9 @@ static inline void da850_evm_setup_nor_nand(void)
 
 		platform_add_devices(da850_evm_devices,
 					ARRAY_SIZE(da850_evm_devices));
+
+		if (davinci_aemif_setup(&da850_evm_nandflash_device))
+			pr_warn("%s: Cannot configure AEMIF.\n", __func__);
 	}
 }
 
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index ecdc7d44fa70..06d63d5651f3 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -350,11 +350,7 @@ static struct davinci_mmc_config dm355evm_mmc_config = {
  * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
  * the ID pin won't need any help.
  */
-#ifdef CONFIG_USB_MUSB_PERIPHERAL
-#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
-#else
 #define USB_ID_VALUE	1	/* ID pulled low */
-#endif
 
 static struct spi_eeprom at25640a = {
 	.byte_len	= SZ_64K / 8,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 43bacbf15314..680a7a2d9102 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -208,11 +208,7 @@ static struct davinci_mmc_config dm355leopard_mmc_config = {
  * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
  * the ID pin won't need any help.
  */
-#ifdef CONFIG_USB_MUSB_PERIPHERAL
-#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
-#else
 #define USB_ID_VALUE	1	/* ID pulled low */
-#endif
 
 static struct spi_eeprom at25640a = {
 	.byte_len	= SZ_64K / 8,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 987605b78556..e583e58b5e1e 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -778,6 +778,11 @@ static __init void davinci_evm_init(void)
 		/* only one device will be jumpered and detected */
 		if (HAS_NAND) {
 			platform_device_register(&davinci_evm_nandflash_device);
+
+			if (davinci_aemif_setup(&davinci_evm_nandflash_device))
+				pr_warn("%s: Cannot configure AEMIF.\n",
+					__func__);
+
 			evm_leds[7].default_trigger = "nand-disk";
 			if (HAS_NOR)
 				pr_warning("WARNING: both NAND and NOR flash "
@@ -799,11 +804,12 @@ static __init void davinci_evm_init(void)
 	/* irlml6401 switches over 1A, in under 8 msec */
 	davinci_setup_usb(1000, 8);
 
-	soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
-	/* Register the fixup for PHY on DaVinci */
-	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
-					davinci_phy_fixup);
-
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
+		soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
+		/* Register the fixup for PHY on DaVinci */
+		phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+						davinci_phy_fixup);
+	}
 }
 
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 13d0801fd6b1..ae129bc49273 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -805,6 +805,9 @@ static __init void evm_init(void)
 
 	platform_device_register(&davinci_nand_device);
 
+	if (davinci_aemif_setup(&davinci_nand_device))
+		pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+
 	dm646x_init_edma(dm646x_edma_rsv);
 
 	if (HAS_ATA)
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 7aa105b1fd0f..96fc00a167f5 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -27,6 +27,7 @@
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 #include <mach/mux.h>
 #include <linux/platform_data/spi-davinci.h>
 
@@ -432,6 +433,9 @@ static void __init mityomapl138_setup_nand(void)
 {
 	platform_add_devices(mityomapl138_devices,
 				 ARRAY_SIZE(mityomapl138_devices));
+
+	if (davinci_aemif_setup(&mityomapl138_nandflash_device))
+		pr_warn("%s: Cannot configure AEMIF.\n", __func__);
 }
 
 static const short mityomap_mii_pins[] = {
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
deleted file mode 100644
index 78ea395d2aca..000000000000
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Texas Instruments TNETV107X EVM Board Support
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ratelimit.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/edma.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-#include <mach/mux.h>
-#include <mach/cp_intc.h>
-#include <mach/tnetv107x.h>
-
-#define EVM_MMC_WP_GPIO		21
-#define EVM_MMC_CD_GPIO		24
-#define EVM_SPI_CS_GPIO		54
-
-static int initialize_gpio(int gpio, char *desc)
-{
-	int ret;
-
-	ret = gpio_request(gpio, desc);
-	if (ret < 0) {
-		pr_err_ratelimited("cannot open %s gpio\n", desc);
-		return -ENOSYS;
-	}
-	gpio_direction_input(gpio);
-	return gpio;
-}
-
-static int mmc_get_cd(int index)
-{
-	static int gpio;
-
-	if (!gpio)
-		gpio = initialize_gpio(EVM_MMC_CD_GPIO, "mmc card detect");
-
-	if (gpio < 0)
-		return gpio;
-
-	return gpio_get_value(gpio) ? 0 : 1;
-}
-
-static int mmc_get_ro(int index)
-{
-	static int gpio;
-
-	if (!gpio)
-		gpio = initialize_gpio(EVM_MMC_WP_GPIO, "mmc write protect");
-
-	if (gpio < 0)
-		return gpio;
-
-	return gpio_get_value(gpio) ? 1 : 0;
-}
-
-static struct davinci_mmc_config mmc_config = {
-	.get_cd		= mmc_get_cd,
-	.get_ro		= mmc_get_ro,
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static const short sdio1_pins[] __initconst = {
-	TNETV107X_SDIO1_CLK_1,		TNETV107X_SDIO1_CMD_1,
-	TNETV107X_SDIO1_DATA0_1,	TNETV107X_SDIO1_DATA1_1,
-	TNETV107X_SDIO1_DATA2_1,	TNETV107X_SDIO1_DATA3_1,
-	TNETV107X_GPIO21,		TNETV107X_GPIO24,
-	-1
-};
-
-static const short uart1_pins[] __initconst = {
-	TNETV107X_UART1_RD,		TNETV107X_UART1_TD,
-	-1
-};
-
-static const short ssp_pins[] __initconst = {
-	TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2,
-	TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2,
-	TNETV107X_SSP1_3, -1
-};
-
-static struct mtd_partition nand_partitions[] = {
-	/* bootloader (U-Boot, etc) in first 12 sectors */
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= (12*SZ_128K),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	},
-	/* file system */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-};
-
-static struct davinci_nand_pdata nand_config = {
-	.mask_cle	= 0x4000,
-	.mask_ale	= 0x2000,
-	.parts		= nand_partitions,
-	.nr_parts	= ARRAY_SIZE(nand_partitions),
-	.ecc_mode	= NAND_ECC_HW,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.ecc_bits	= 1,
-};
-
-static struct davinci_uart_config serial_config __initconst = {
-	.enabled_uarts	= BIT(1),
-};
-
-static const uint32_t keymap[] = {
-	KEY(0, 0, KEY_NUMERIC_1),
-	KEY(0, 1, KEY_NUMERIC_2),
-	KEY(0, 2, KEY_NUMERIC_3),
-	KEY(0, 3, KEY_FN_F1),
-	KEY(0, 4, KEY_MENU),
-
-	KEY(1, 0, KEY_NUMERIC_4),
-	KEY(1, 1, KEY_NUMERIC_5),
-	KEY(1, 2, KEY_NUMERIC_6),
-	KEY(1, 3, KEY_UP),
-	KEY(1, 4, KEY_FN_F2),
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_NUMERIC_8),
-	KEY(2, 2, KEY_NUMERIC_9),
-	KEY(2, 3, KEY_LEFT),
-	KEY(2, 4, KEY_ENTER),
-
-	KEY(3, 0, KEY_NUMERIC_STAR),
-	KEY(3, 1, KEY_NUMERIC_0),
-	KEY(3, 2, KEY_NUMERIC_POUND),
-	KEY(3, 3, KEY_DOWN),
-	KEY(3, 4, KEY_RIGHT),
-
-	KEY(4, 0, KEY_FN_F3),
-	KEY(4, 1, KEY_FN_F4),
-	KEY(4, 2, KEY_MUTE),
-	KEY(4, 3, KEY_HOME),
-	KEY(4, 4, KEY_BACK),
-
-	KEY(5, 0, KEY_VOLUMEDOWN),
-	KEY(5, 1, KEY_VOLUMEUP),
-	KEY(5, 2, KEY_F1),
-	KEY(5, 3, KEY_F2),
-	KEY(5, 4, KEY_F3),
-};
-
-static const struct matrix_keymap_data keymap_data = {
-	.keymap		= keymap,
-	.keymap_size	= ARRAY_SIZE(keymap),
-};
-
-static struct matrix_keypad_platform_data keypad_config = {
-	.keymap_data	= &keymap_data,
-	.num_row_gpios	= 6,
-	.num_col_gpios	= 5,
-	.debounce_ms	= 0, /* minimum */
-	.active_low	= 0, /* pull up realization */
-	.no_autorepeat	= 0,
-};
-
-static void spi_select_device(int cs)
-{
-	static int gpio;
-
-	if (!gpio) {
-		int ret;
-		ret = gpio_request(EVM_SPI_CS_GPIO, "spi chipsel");
-		if (ret < 0) {
-			pr_err("cannot open spi chipsel gpio\n");
-			gpio = -ENOSYS;
-			return;
-		} else {
-			gpio = EVM_SPI_CS_GPIO;
-			gpio_direction_output(gpio, 0);
-		}
-	}
-
-	if (gpio < 0)
-		return;
-
-	return gpio_set_value(gpio, cs ? 1 : 0);
-}
-
-static struct ti_ssp_spi_data spi_master_data = {
-	.num_cs	= 2,
-	.select	= spi_select_device,
-	.iosel	= SSP_PIN_SEL(0, SSP_CLOCK)	| SSP_PIN_SEL(1, SSP_DATA) |
-		  SSP_PIN_SEL(2, SSP_CHIPSEL)	| SSP_PIN_SEL(3, SSP_IN)   |
-		  SSP_INPUT_SEL(3),
-};
-
-static struct ti_ssp_data ssp_config = {
-	.out_clock	= 250 * 1000,
-	.dev_data	= {
-		[1] = {
-			.dev_name = "ti-ssp-spi",
-			.pdata = &spi_master_data,
-			.pdata_size = sizeof(spi_master_data),
-		},
-	},
-};
-
-static struct tnetv107x_device_info evm_device_info __initconst = {
-	.serial_config		= &serial_config,
-	.mmc_config[1]		= &mmc_config,	/* controller 1 */
-	.nand_config[0]		= &nand_config,	/* chip select 0 */
-	.keypad_config		= &keypad_config,
-	.ssp_config		= &ssp_config,
-};
-
-static struct spi_board_info spi_info[] __initconst = {
-};
-
-static __init void tnetv107x_evm_board_init(void)
-{
-	davinci_cfg_reg_list(sdio1_pins);
-	davinci_cfg_reg_list(uart1_pins);
-	davinci_cfg_reg_list(ssp_pins);
-
-	tnetv107x_devices_init(&evm_device_info);
-
-	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init tnetv107x_evm_console_init(void)
-{
-	return add_preferred_console("ttyS", 0, "115200");
-}
-console_initcall(tnetv107x_evm_console_init);
-#endif
-
-MACHINE_START(TNETV107X, "TNETV107X EVM")
-	.atag_offset	= 0x100,
-	.map_io		= tnetv107x_init,
-	.init_irq	= cp_intc_init,
-	.init_time	= davinci_timer_init,
-	.init_machine	= tnetv107x_evm_board_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-	.restart	= tnetv107x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 2ab00434b2eb..45ce065e7170 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -472,7 +472,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
 	CLK("vpif",		NULL,		&vpif_clk),
-	CLK("ahci",		NULL,		&sata_clk),
+	CLK("ahci_da850",		NULL,		&sata_clk),
 	CLK("davinci-rproc.0",	NULL,		&dsp_clk),
 	CLK("ehrpwm",		"fck",		&ehrpwm_clk),
 	CLK("ehrpwm",		"tbclk",	&ehrpwm_tbclk),
@@ -1092,20 +1092,21 @@ int da850_register_cpufreq(char *async_clk)
 
 static int da850_round_armrate(struct clk *clk, unsigned long rate)
 {
-	int i, ret = 0, diff;
+	int ret = 0, diff;
 	unsigned int best = (unsigned int) -1;
 	struct cpufreq_frequency_table *table = cpufreq_info.freq_table;
+	struct cpufreq_frequency_table *pos;
 
 	rate /= 1000; /* convert to kHz */
 
-	for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		diff = table[i].frequency - rate;
+	cpufreq_for_each_entry(pos, table) {
+		diff = pos->frequency - rate;
 		if (diff < 0)
 			diff = -diff;
 
 		if (diff < best) {
 			best = diff;
-			ret = table[i].frequency;
+			ret = pos->frequency;
 		}
 	}
 
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 2eebc4338802..4ffc37accce0 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -79,6 +79,8 @@ int davinci_gpio_register(struct resource *res, int size, void *pdata);
 #define DM646X_ASYNC_EMIF_CONTROL_BASE	0x20008000
 #define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000
 
+int davinci_init_wdt(void);
+
 /* DM355 function declarations */
 void dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 0486cdf28c8d..b85b781b05fd 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -134,13 +134,6 @@ struct platform_device da8xx_serial_device[] = {
 	}
 };
 
-static s8 da8xx_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1}
-};
-
 static s8 da8xx_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
@@ -148,12 +141,6 @@ static s8 da8xx_queue_priority_mapping[][2] = {
 	{-1, -1}
 };
 
-static s8 da850_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{-1, -1}
-};
-
 static s8 da850_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
@@ -161,12 +148,6 @@ static s8 da850_queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info da830_edma_cc0_info = {
-	.n_channel		= 32,
-	.n_region		= 4,
-	.n_slot			= 128,
-	.n_tc			= 2,
-	.n_cc			= 1,
-	.queue_tc_mapping	= da8xx_queue_tc_mapping,
 	.queue_priority_mapping	= da8xx_queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
@@ -177,22 +158,10 @@ static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
 
 static struct edma_soc_info da850_edma_cc_info[] = {
 	{
-		.n_channel		= 32,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 2,
-		.n_cc			= 1,
-		.queue_tc_mapping	= da8xx_queue_tc_mapping,
 		.queue_priority_mapping	= da8xx_queue_priority_mapping,
 		.default_queue		= EVENTQ_1,
 	},
 	{
-		.n_channel		= 32,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 1,
-		.n_cc			= 1,
-		.queue_tc_mapping	= da850_queue_tc_mapping,
 		.queue_priority_mapping	= da850_queue_priority_mapping,
 		.default_queue		= EVENTQ_0,
 	},
@@ -1020,7 +989,6 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
 }
 
 #ifdef CONFIG_ARCH_DAVINCI_DA850
-
 static struct resource da850_sata_resources[] = {
 	{
 		.start	= DA850_SATA_BASE,
@@ -1028,103 +996,22 @@ static struct resource da850_sata_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.start	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG,
+		.end	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG + 0x3,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
 		.start	= IRQ_DA850_SATAINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-/* SATA PHY Control Register offset from AHCI base */
-#define SATA_P0PHYCR_REG	0x178
-
-#define SATA_PHY_MPY(x)		((x) << 0)
-#define SATA_PHY_LOS(x)		((x) << 6)
-#define SATA_PHY_RXCDR(x)	((x) << 10)
-#define SATA_PHY_RXEQ(x)	((x) << 13)
-#define SATA_PHY_TXSWING(x)	((x) << 19)
-#define SATA_PHY_ENPLL(x)	((x) << 31)
-
-static struct clk *da850_sata_clk;
-static unsigned long da850_sata_refclkpn;
-
-/* Supported DA850 SATA crystal frequencies */
-#define KHZ_TO_HZ(freq) ((freq) * 1000)
-static unsigned long da850_sata_xtal[] = {
-	KHZ_TO_HZ(300000),
-	KHZ_TO_HZ(250000),
-	0,			/* Reserved */
-	KHZ_TO_HZ(187500),
-	KHZ_TO_HZ(150000),
-	KHZ_TO_HZ(125000),
-	KHZ_TO_HZ(120000),
-	KHZ_TO_HZ(100000),
-	KHZ_TO_HZ(75000),
-	KHZ_TO_HZ(60000),
-};
-
-static int da850_sata_init(struct device *dev, void __iomem *addr)
-{
-	int i, ret;
-	unsigned int val;
-
-	da850_sata_clk = clk_get(dev, NULL);
-	if (IS_ERR(da850_sata_clk))
-		return PTR_ERR(da850_sata_clk);
-
-	ret = clk_prepare_enable(da850_sata_clk);
-	if (ret)
-		goto err0;
-
-	/* Enable SATA clock receiver */
-	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
-	val &= ~BIT(0);
-	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
-
-	/* Get the multiplier needed for 1.5GHz PLL output */
-	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
-		if (da850_sata_xtal[i] == da850_sata_refclkpn)
-			break;
-
-	if (i == ARRAY_SIZE(da850_sata_xtal)) {
-		ret = -EINVAL;
-		goto err1;
-	}
-
-	val = SATA_PHY_MPY(i + 1) |
-		SATA_PHY_LOS(1) |
-		SATA_PHY_RXCDR(4) |
-		SATA_PHY_RXEQ(1) |
-		SATA_PHY_TXSWING(3) |
-		SATA_PHY_ENPLL(1);
-
-	__raw_writel(val, addr + SATA_P0PHYCR_REG);
-
-	return 0;
-
-err1:
-	clk_disable_unprepare(da850_sata_clk);
-err0:
-	clk_put(da850_sata_clk);
-	return ret;
-}
-
-static void da850_sata_exit(struct device *dev)
-{
-	clk_disable_unprepare(da850_sata_clk);
-	clk_put(da850_sata_clk);
-}
-
-static struct ahci_platform_data da850_sata_pdata = {
-	.init	= da850_sata_init,
-	.exit	= da850_sata_exit,
-};
-
 static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device da850_sata_device = {
-	.name	= "ahci",
+	.name	= "ahci_da850",
 	.id	= -1,
 	.dev	= {
-		.platform_data		= &da850_sata_pdata,
 		.dma_mask		= &da850_sata_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
@@ -1134,9 +1021,8 @@ static struct platform_device da850_sata_device = {
 
 int __init da850_register_sata(unsigned long refclkpn)
 {
-	da850_sata_refclkpn = refclkpn;
-	if (!da850_sata_refclkpn)
-		return -EINVAL;
+	/* please see comment in drivers/ata/ahci_da850.c */
+	BUG_ON(refclkpn != 100 * 1000 * 1000);
 
 	return platform_device_register(&da850_sata_device);
 }
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
deleted file mode 100644
index 01d8686e553c..000000000000
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * Texas Instruments TNETV107X SoC devices
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-#include <linux/platform_data/edma.h>
-
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/tnetv107x.h>
-
-#include "clock.h"
-
-/* Base addresses for on-chip devices */
-#define TNETV107X_TPCC_BASE			0x01c00000
-#define TNETV107X_TPTC0_BASE			0x01c10000
-#define TNETV107X_TPTC1_BASE			0x01c10400
-#define TNETV107X_WDOG_BASE			0x08086700
-#define TNETV107X_TSC_BASE			0x08088500
-#define TNETV107X_SDIO0_BASE			0x08088700
-#define TNETV107X_SDIO1_BASE			0x08088800
-#define TNETV107X_KEYPAD_BASE			0x08088a00
-#define TNETV107X_SSP_BASE			0x08088c00
-#define TNETV107X_ASYNC_EMIF_CNTRL_BASE		0x08200000
-#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE	0x30000000
-#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE	0x40000000
-#define TNETV107X_ASYNC_EMIF_DATA_CE2_BASE	0x44000000
-#define TNETV107X_ASYNC_EMIF_DATA_CE3_BASE	0x48000000
-
-/* TNETV107X specific EDMA3 information */
-#define EDMA_TNETV107X_NUM_DMACH	64
-#define EDMA_TNETV107X_NUM_TCC		64
-#define EDMA_TNETV107X_NUM_PARAMENTRY	128
-#define EDMA_TNETV107X_NUM_EVQUE	2
-#define EDMA_TNETV107X_NUM_TC		2
-#define EDMA_TNETV107X_CHMAP_EXIST	0
-#define EDMA_TNETV107X_NUM_REGIONS	4
-#define TNETV107X_DMACH2EVENT_MAP0	0x3C0CE000u
-#define TNETV107X_DMACH2EVENT_MAP1	0x000FFFFFu
-
-#define TNETV107X_DMACH_SDIO0_RX		26
-#define TNETV107X_DMACH_SDIO0_TX		27
-#define TNETV107X_DMACH_SDIO1_RX		28
-#define TNETV107X_DMACH_SDIO1_TX		29
-
-static s8 edma_tc_mapping[][2] = {
-	/* event queue no	TC no	*/
-	{	 0,		 0	},
-	{	 1,		 1	},
-	{	-1,		-1	}
-};
-
-static s8 edma_priority_mapping[][2] = {
-	/* event queue no	Prio	*/
-	{	 0,		 3	},
-	{	 1,		 7	},
-	{	-1,		-1	}
-};
-
-static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= EDMA_TNETV107X_NUM_DMACH,
-	.n_region		= EDMA_TNETV107X_NUM_REGIONS,
-	.n_slot			= EDMA_TNETV107X_NUM_PARAMENTRY,
-	.n_tc			= EDMA_TNETV107X_NUM_TC,
-	.n_cc			= 1,
-	.queue_tc_mapping	= edma_tc_mapping,
-	.queue_priority_mapping	= edma_priority_mapping,
-	.default_queue		= EVENTQ_1,
-};
-
-static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma_cc0",
-		.start	= TNETV107X_TPCC_BASE,
-		.end	= TNETV107X_TPCC_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc0",
-		.start	= TNETV107X_TPTC0_BASE,
-		.end	= TNETV107X_TPTC0_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc1",
-		.start	= TNETV107X_TPTC1_BASE,
-		.end	= TNETV107X_TPTC1_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma0",
-		.start	= IRQ_TNETV107X_TPCC,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma0_err",
-		.start	= IRQ_TNETV107X_TPCC_ERR,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device edma_device = {
-	.name		= "edma",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(edma_resources),
-	.resource	= edma_resources,
-	.dev.platform_data = tnetv107x_edma_info,
-};
-
-static struct plat_serial8250_port serial0_platform_data[] = {
-	{
-		.mapbase	= TNETV107X_UART0_BASE,
-		.irq		= IRQ_TNETV107X_UART0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_FIXED_TYPE | UPF_IOREMAP,
-		.type		= PORT_AR7,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port serial1_platform_data[] = {
-	{
-		.mapbase	= TNETV107X_UART1_BASE,
-		.irq		= IRQ_TNETV107X_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_FIXED_TYPE | UPF_IOREMAP,
-		.type		= PORT_AR7,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port serial2_platform_data[] = {
-	{
-		.mapbase	= TNETV107X_UART2_BASE,
-		.irq		= IRQ_TNETV107X_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_FIXED_TYPE | UPF_IOREMAP,
-		.type		= PORT_AR7,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-
-struct platform_device tnetv107x_serial_device[] = {
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM,
-		.dev.platform_data	= serial0_platform_data,
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM1,
-		.dev.platform_data	= serial1_platform_data,
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM2,
-		.dev.platform_data	= serial2_platform_data,
-	},
-	{
-	}
-};
-
-static struct resource mmc0_resources[] = {
-	{ /* Memory mapped registers */
-		.start	= TNETV107X_SDIO0_BASE,
-		.end	= TNETV107X_SDIO0_BASE + 0x0ff,
-		.flags	= IORESOURCE_MEM
-	},
-	{ /* MMC interrupt */
-		.start	= IRQ_TNETV107X_MMC0,
-		.flags	= IORESOURCE_IRQ
-	},
-	{ /* SDIO interrupt */
-		.start	= IRQ_TNETV107X_SDIO0,
-		.flags	= IORESOURCE_IRQ
-	},
-	{ /* DMA RX */
-		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_RX),
-		.flags	= IORESOURCE_DMA
-	},
-	{ /* DMA TX */
-		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_TX),
-		.flags	= IORESOURCE_DMA
-	},
-};
-
-static struct resource mmc1_resources[] = {
-	{ /* Memory mapped registers */
-		.start	= TNETV107X_SDIO1_BASE,
-		.end	= TNETV107X_SDIO1_BASE + 0x0ff,
-		.flags	= IORESOURCE_MEM
-	},
-	{ /* MMC interrupt */
-		.start	= IRQ_TNETV107X_MMC1,
-		.flags	= IORESOURCE_IRQ
-	},
-	{ /* SDIO interrupt */
-		.start	= IRQ_TNETV107X_SDIO1,
-		.flags	= IORESOURCE_IRQ
-	},
-	{ /* DMA RX */
-		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_RX),
-		.flags	= IORESOURCE_DMA
-	},
-	{ /* DMA TX */
-		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_TX),
-		.flags	= IORESOURCE_DMA
-	},
-};
-
-static u64 mmc0_dma_mask = DMA_BIT_MASK(32);
-static u64 mmc1_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device mmc_devices[2] = {
-	{
-		.name		= "dm6441-mmc",
-		.id		= 0,
-		.dev		= {
-			.dma_mask		= &mmc0_dma_mask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-		},
-		.num_resources	= ARRAY_SIZE(mmc0_resources),
-		.resource	= mmc0_resources
-	},
-	{
-		.name		= "dm6441-mmc",
-		.id		= 1,
-		.dev		= {
-			.dma_mask		= &mmc1_dma_mask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-		},
-		.num_resources	= ARRAY_SIZE(mmc1_resources),
-		.resource	= mmc1_resources
-	},
-};
-
-static const u32 emif_windows[] = {
-	TNETV107X_ASYNC_EMIF_DATA_CE0_BASE, TNETV107X_ASYNC_EMIF_DATA_CE1_BASE,
-	TNETV107X_ASYNC_EMIF_DATA_CE2_BASE, TNETV107X_ASYNC_EMIF_DATA_CE3_BASE,
-};
-
-static const u32 emif_window_sizes[] = { SZ_256M, SZ_64M, SZ_64M, SZ_64M };
-
-static struct resource wdt_resources[] = {
-	{
-		.start	= TNETV107X_WDOG_BASE,
-		.end	= TNETV107X_WDOG_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device tnetv107x_wdt_device = {
-	.name		= "tnetv107x_wdt",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-static int __init nand_init(int chipsel, struct davinci_nand_pdata *data)
-{
-	struct resource res[2];
-	struct platform_device *pdev;
-	u32	range;
-	int	ret;
-
-	/* Figure out the resource range from the ale/cle masks */
-	range = max(data->mask_cle, data->mask_ale);
-	range = PAGE_ALIGN(range + 4) - 1;
-
-	if (range >= emif_window_sizes[chipsel])
-		return -EINVAL;
-
-	pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
-	if (!pdev)
-		return -ENOMEM;
-
-	pdev->name		= "davinci_nand";
-	pdev->id		= chipsel;
-	pdev->dev.platform_data	= data;
-
-	memset(res, 0, sizeof(res));
-
-	res[0].start	= emif_windows[chipsel];
-	res[0].end	= res[0].start + range;
-	res[0].flags	= IORESOURCE_MEM;
-
-	res[1].start	= TNETV107X_ASYNC_EMIF_CNTRL_BASE;
-	res[1].end	= res[1].start + SZ_4K - 1;
-	res[1].flags	= IORESOURCE_MEM;
-
-	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
-	if (ret < 0) {
-		kfree(pdev);
-		return ret;
-	}
-
-	return platform_device_register(pdev);
-}
-
-static struct resource keypad_resources[] = {
-	{
-		.start	= TNETV107X_KEYPAD_BASE,
-		.end	= TNETV107X_KEYPAD_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_TNETV107X_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "press",
-	},
-	{
-		.start	= IRQ_TNETV107X_KEYPAD_FREE,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "release",
-	},
-};
-
-static struct platform_device keypad_device = {
-	.name		= "tnetv107x-keypad",
-	.num_resources	= ARRAY_SIZE(keypad_resources),
-	.resource	= keypad_resources,
-};
-
-static struct resource tsc_resources[] = {
-	{
-		.start	= TNETV107X_TSC_BASE,
-		.end	= TNETV107X_TSC_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_TNETV107X_TSC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tsc_device = {
-	.name		= "tnetv107x-ts",
-	.num_resources	= ARRAY_SIZE(tsc_resources),
-	.resource	= tsc_resources,
-};
-
-static struct resource ssp_resources[] = {
-	{
-		.start	= TNETV107X_SSP_BASE,
-		.end	= TNETV107X_SSP_BASE + 0x1ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_TNETV107X_SSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ssp_device = {
-	.name		= "ti-ssp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ssp_resources),
-	.resource	= ssp_resources,
-};
-
-void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
-{
-	int i, error;
-	struct clk *tsc_clk;
-
-	/*
-	 * The reset defaults for tnetv107x tsc clock divider is set too high.
-	 * This forces the clock down to a range that allows the ADC to
-	 * complete sample conversion in time.
-	 */
-	tsc_clk = clk_get(NULL, "sys_tsc_clk");
-	if (!IS_ERR(tsc_clk)) {
-		error = clk_set_rate(tsc_clk, 5000000);
-		WARN_ON(error < 0);
-		clk_put(tsc_clk);
-	}
-
-	platform_device_register(&edma_device);
-	platform_device_register(&tnetv107x_wdt_device);
-	platform_device_register(&tsc_device);
-
-	if (info->serial_config)
-		davinci_serial_init(tnetv107x_serial_device);
-
-	for (i = 0; i < 2; i++)
-		if (info->mmc_config[i]) {
-			mmc_devices[i].dev.platform_data = info->mmc_config[i];
-			platform_device_register(&mmc_devices[i]);
-		}
-
-	for (i = 0; i < 4; i++)
-		if (info->nand_config[i])
-			nand_init(i, info->nand_config[i]);
-
-	if (info->keypad_config) {
-		keypad_device.dev.platform_data = info->keypad_config;
-		platform_device_register(&keypad_device);
-	}
-
-	if (info->ssp_config) {
-		ssp_device.dev.platform_data = info->ssp_config;
-		platform_device_register(&ssp_device);
-	}
-}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 5cf9a027dcc6..6257aa452568 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -313,9 +313,9 @@ void davinci_restart(enum reboot_mode mode, const char *cmd)
 	davinci_watchdog_reset(&davinci_wdt_device);
 }
 
-static void davinci_init_wdt(void)
+int davinci_init_wdt(void)
 {
-	platform_device_register(&davinci_wdt_device);
+	return platform_device_register(&davinci_wdt_device);
 }
 
 static struct platform_device davinci_gpio_device = {
@@ -348,16 +348,3 @@ struct davinci_timer_instance davinci_timer_instance[2] = {
 	},
 };
 
-/*-------------------------------------------------------------------------*/
-
-static int __init davinci_init_devices(void)
-{
-	/* please keep these calls, and their implementations above,
-	 * in alphabetical order so they're easier to sort through.
-	 */
-	davinci_init_wdt();
-
-	return 0;
-}
-arch_initcall(davinci_init_devices);
-
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 4668c0e19767..2f3ed3a58d57 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -569,14 +569,6 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 /*----------------------------------------------------------------------*/
 
 static s8
-queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1},
-};
-
-static s8
 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
@@ -585,12 +577,6 @@ queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 4,
-	.n_slot			= 128,
-	.n_tc			= 2,
-	.n_cc			= 1,
-	.queue_tc_mapping	= queue_tc_mapping,
 	.queue_priority_mapping	= queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
@@ -1076,12 +1062,18 @@ int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm355_init_devices(void)
 {
+	int ret = 0;
+
 	if (!cpu_is_davinci_dm355())
 		return 0;
 
 	davinci_cfg_reg(DM355_INT_EDMA_CC);
 	platform_device_register(&dm355_edma_device);
 
-	return 0;
+	ret = davinci_init_wdt();
+	if (ret)
+		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
+
+	return ret;
 }
 postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index b44b49e2801a..0ae8114f5cc9 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -853,16 +853,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /* Four Transfer Controllers on DM365 */
 static s8
-dm365_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{2, 2},
-	{3, 3},
-	{-1, -1},
-};
-
-static s8
 dm365_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 7},
@@ -873,12 +863,6 @@ dm365_queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 4,
-	.n_slot			= 256,
-	.n_tc			= 4,
-	.n_cc			= 1,
-	.queue_tc_mapping	= dm365_queue_tc_mapping,
 	.queue_priority_mapping	= dm365_queue_priority_mapping,
 	.default_queue		= EVENTQ_3,
 };
@@ -1436,6 +1420,8 @@ int __init dm365_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm365_init_devices(void)
 {
+	int ret = 0;
+
 	if (!cpu_is_davinci_dm365())
 		return 0;
 
@@ -1445,6 +1431,10 @@ static int __init dm365_init_devices(void)
 	platform_device_register(&dm365_mdio_device);
 	platform_device_register(&dm365_emac_device);
 
-	return 0;
+	ret = davinci_init_wdt();
+	if (ret)
+		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
+
+	return ret;
 }
 postcore_initcall(dm365_init_devices);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 5c3e0be95ef3..dc52657909c4 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -499,14 +499,6 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 /*----------------------------------------------------------------------*/
 
 static s8
-queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1},
-};
-
-static s8
 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
@@ -515,12 +507,6 @@ queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 4,
-	.n_slot			= 128,
-	.n_tc			= 2,
-	.n_cc			= 1,
-	.queue_tc_mapping	= queue_tc_mapping,
 	.queue_priority_mapping	= queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
@@ -964,6 +950,8 @@ int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm644x_init_devices(void)
 {
+	int ret = 0;
+
 	if (!cpu_is_davinci_dm644x())
 		return 0;
 
@@ -972,6 +960,10 @@ static int __init dm644x_init_devices(void)
 	platform_device_register(&dm644x_mdio_device);
 	platform_device_register(&dm644x_emac_device);
 
-	return 0;
+	ret = davinci_init_wdt();
+	if (ret)
+		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
+
+	return ret;
 }
 postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 81768dd47096..6c3bbea7d77d 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -533,16 +533,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /* Four Transfer Controllers on DM646x */
 static s8
-dm646x_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{2, 2},
-	{3, 3},
-	{-1, -1},
-};
-
-static s8
 dm646x_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 4},
@@ -553,12 +543,6 @@ dm646x_queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 6,	/* 0-1, 4-7 */
-	.n_slot			= 512,
-	.n_tc			= 4,
-	.n_cc			= 1,
-	.queue_tc_mapping	= dm646x_queue_tc_mapping,
 	.queue_priority_mapping	= dm646x_queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
@@ -955,12 +939,18 @@ void __init dm646x_init(void)
 
 static int __init dm646x_init_devices(void)
 {
+	int ret = 0;
+
 	if (!cpu_is_davinci_dm646x())
 		return 0;
 
 	platform_device_register(&dm646x_mdio_device);
 	platform_device_register(&dm646x_emac_device);
 
-	return 0;
+	ret = davinci_init_wdt();
+	if (ret)
+		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
+
+	return ret;
 }
 postcore_initcall(dm646x_init_devices);
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index 957fb87e832e..1fc84e21664d 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -33,7 +33,6 @@ struct davinci_id {
 #define	DAVINCI_CPU_ID_DM365		0x03650000
 #define	DAVINCI_CPU_ID_DA830		0x08300000
 #define	DAVINCI_CPU_ID_DA850		0x08500000
-#define	DAVINCI_CPU_ID_TNETV107X	0x0b8a0000
 
 #define IS_DAVINCI_CPU(type, id)					\
 static inline int is_davinci_ ##type(void)				\
@@ -47,7 +46,6 @@ IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
 IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
 IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850)
-IS_DAVINCI_CPU(tnetv107x, DAVINCI_CPU_ID_TNETV107X)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
@@ -85,10 +83,4 @@ IS_DAVINCI_CPU(tnetv107x, DAVINCI_CPU_ID_TNETV107X)
 #define cpu_is_davinci_da850() 0
 #endif
 
-#ifdef CONFIG_ARCH_DAVINCI_TNETV107X
-#define cpu_is_davinci_tnetv107x() is_davinci_tnetv107x()
-#else
-#define cpu_is_davinci_tnetv107x() 0
-#endif
-
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index ec76c7775c2e..354af71798dc 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -401,103 +401,6 @@
 
 #define DA850_N_CP_INTC_IRQ		101
 
-
-/* TNETV107X specific interrupts */
-#define IRQ_TNETV107X_TDM1_TXDMA		0
-#define IRQ_TNETV107X_EXT_INT_0			1
-#define IRQ_TNETV107X_EXT_INT_1			2
-#define IRQ_TNETV107X_GPIO_INT12		3
-#define IRQ_TNETV107X_GPIO_INT13		4
-#define IRQ_TNETV107X_TIMER_0_TINT12		5
-#define IRQ_TNETV107X_TIMER_1_TINT12		6
-#define IRQ_TNETV107X_UART0			7
-#define IRQ_TNETV107X_TDM1_RXDMA		8
-#define IRQ_TNETV107X_MCDMA_INT0		9
-#define IRQ_TNETV107X_MCDMA_INT1		10
-#define IRQ_TNETV107X_TPCC			11
-#define IRQ_TNETV107X_TPCC_INT0			12
-#define IRQ_TNETV107X_TPCC_INT1			13
-#define IRQ_TNETV107X_TPCC_INT2			14
-#define IRQ_TNETV107X_TPCC_INT3			15
-#define IRQ_TNETV107X_TPTC0			16
-#define IRQ_TNETV107X_TPTC1			17
-#define IRQ_TNETV107X_TIMER_0_TINT34		18
-#define IRQ_TNETV107X_ETHSS			19
-#define IRQ_TNETV107X_TIMER_1_TINT34		20
-#define IRQ_TNETV107X_DSP2ARM_INT0		21
-#define IRQ_TNETV107X_DSP2ARM_INT1		22
-#define IRQ_TNETV107X_ARM_NPMUIRQ		23
-#define IRQ_TNETV107X_USB1			24
-#define IRQ_TNETV107X_VLYNQ			25
-#define IRQ_TNETV107X_UART0_DMATX		26
-#define IRQ_TNETV107X_UART0_DMARX		27
-#define IRQ_TNETV107X_TDM1_TXMCSP		28
-#define IRQ_TNETV107X_SSP			29
-#define IRQ_TNETV107X_MCDMA_INT2		30
-#define IRQ_TNETV107X_MCDMA_INT3		31
-#define IRQ_TNETV107X_TDM_CODECIF_EOT		32
-#define IRQ_TNETV107X_IMCOP_SQR_ARM		33
-#define IRQ_TNETV107X_USB0			34
-#define IRQ_TNETV107X_USB_CDMA			35
-#define IRQ_TNETV107X_LCD			36
-#define IRQ_TNETV107X_KEYPAD			37
-#define IRQ_TNETV107X_KEYPAD_FREE		38
-#define IRQ_TNETV107X_RNG			39
-#define IRQ_TNETV107X_PKA			40
-#define IRQ_TNETV107X_TDM0_TXDMA		41
-#define IRQ_TNETV107X_TDM0_RXDMA		42
-#define IRQ_TNETV107X_TDM0_TXMCSP		43
-#define IRQ_TNETV107X_TDM0_RXMCSP		44
-#define IRQ_TNETV107X_TDM1_RXMCSP		45
-#define IRQ_TNETV107X_SDIO1			46
-#define IRQ_TNETV107X_SDIO0			47
-#define IRQ_TNETV107X_TSC			48
-#define IRQ_TNETV107X_TS			49
-#define IRQ_TNETV107X_UART1			50
-#define IRQ_TNETV107X_MBX_LITE			51
-#define IRQ_TNETV107X_GPIO_INT00		52
-#define IRQ_TNETV107X_GPIO_INT01		53
-#define IRQ_TNETV107X_GPIO_INT02		54
-#define IRQ_TNETV107X_GPIO_INT03		55
-#define IRQ_TNETV107X_UART2			56
-#define IRQ_TNETV107X_UART2_DMATX		57
-#define IRQ_TNETV107X_UART2_DMARX		58
-#define IRQ_TNETV107X_IMCOP_IMX			59
-#define IRQ_TNETV107X_IMCOP_VLCD		60
-#define IRQ_TNETV107X_AES			61
-#define IRQ_TNETV107X_DES			62
-#define IRQ_TNETV107X_SHAMD5			63
-#define IRQ_TNETV107X_TPCC_ERR			68
-#define IRQ_TNETV107X_TPCC_PROT			69
-#define IRQ_TNETV107X_TPTC0_ERR			70
-#define IRQ_TNETV107X_TPTC1_ERR			71
-#define IRQ_TNETV107X_UART0_ERR			72
-#define IRQ_TNETV107X_UART1_ERR			73
-#define IRQ_TNETV107X_AEMIF_ERR			74
-#define IRQ_TNETV107X_DDR_ERR			75
-#define IRQ_TNETV107X_WDTARM_INT0		76
-#define IRQ_TNETV107X_MCDMA_ERR			77
-#define IRQ_TNETV107X_GPIO_ERR			78
-#define IRQ_TNETV107X_MPU_ADDR			79
-#define IRQ_TNETV107X_MPU_PROT			80
-#define IRQ_TNETV107X_IOPU_ADDR			81
-#define IRQ_TNETV107X_IOPU_PROT			82
-#define IRQ_TNETV107X_KEYPAD_ADDR_ERR		83
-#define IRQ_TNETV107X_WDT0_ADDR_ERR		84
-#define IRQ_TNETV107X_WDT1_ADDR_ERR		85
-#define IRQ_TNETV107X_CLKCTL_ADDR_ERR		86
-#define IRQ_TNETV107X_PLL_UNLOCK		87
-#define IRQ_TNETV107X_WDTDSP_INT0		88
-#define IRQ_TNETV107X_SEC_CTRL_VIOLATION	89
-#define IRQ_TNETV107X_KEY_MNG_VIOLATION		90
-#define IRQ_TNETV107X_PBIST_CPU			91
-#define IRQ_TNETV107X_WDTARM			92
-#define IRQ_TNETV107X_PSC			93
-#define IRQ_TNETV107X_MMC0			94
-#define IRQ_TNETV107X_MMC1			95
-
-#define TNETV107X_N_CP_INTC_IRQ			96
-
 /* da850 currently has the most gpio pins (144) */
 #define DAVINCI_N_GPIO			144
 /* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 9e95b8a1edb6..631655e68ae0 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -972,275 +972,6 @@ enum davinci_da850_index {
 	DA850_VPIF_CLKO3,
 };
 
-enum davinci_tnetv107x_index {
-	TNETV107X_ASR_A00,
-	TNETV107X_GPIO32,
-	TNETV107X_ASR_A01,
-	TNETV107X_GPIO33,
-	TNETV107X_ASR_A02,
-	TNETV107X_GPIO34,
-	TNETV107X_ASR_A03,
-	TNETV107X_GPIO35,
-	TNETV107X_ASR_A04,
-	TNETV107X_GPIO36,
-	TNETV107X_ASR_A05,
-	TNETV107X_GPIO37,
-	TNETV107X_ASR_A06,
-	TNETV107X_GPIO38,
-	TNETV107X_ASR_A07,
-	TNETV107X_GPIO39,
-	TNETV107X_ASR_A08,
-	TNETV107X_GPIO40,
-	TNETV107X_ASR_A09,
-	TNETV107X_GPIO41,
-	TNETV107X_ASR_A10,
-	TNETV107X_GPIO42,
-	TNETV107X_ASR_A11,
-	TNETV107X_BOOT_STRP_0,
-	TNETV107X_ASR_A12,
-	TNETV107X_BOOT_STRP_1,
-	TNETV107X_ASR_A13,
-	TNETV107X_GPIO43,
-	TNETV107X_ASR_A14,
-	TNETV107X_GPIO44,
-	TNETV107X_ASR_A15,
-	TNETV107X_GPIO45,
-	TNETV107X_ASR_A16,
-	TNETV107X_GPIO46,
-	TNETV107X_ASR_A17,
-	TNETV107X_GPIO47,
-	TNETV107X_ASR_A18,
-	TNETV107X_GPIO48,
-	TNETV107X_SDIO1_DATA3_0,
-	TNETV107X_ASR_A19,
-	TNETV107X_GPIO49,
-	TNETV107X_SDIO1_DATA2_0,
-	TNETV107X_ASR_A20,
-	TNETV107X_GPIO50,
-	TNETV107X_SDIO1_DATA1_0,
-	TNETV107X_ASR_A21,
-	TNETV107X_GPIO51,
-	TNETV107X_SDIO1_DATA0_0,
-	TNETV107X_ASR_A22,
-	TNETV107X_GPIO52,
-	TNETV107X_SDIO1_CMD_0,
-	TNETV107X_ASR_A23,
-	TNETV107X_GPIO53,
-	TNETV107X_SDIO1_CLK_0,
-	TNETV107X_ASR_BA_1,
-	TNETV107X_GPIO54,
-	TNETV107X_SYS_PLL_CLK,
-	TNETV107X_ASR_CS0,
-	TNETV107X_ASR_CS1,
-	TNETV107X_ASR_CS2,
-	TNETV107X_TDM_PLL_CLK,
-	TNETV107X_ASR_CS3,
-	TNETV107X_ETH_PHY_CLK,
-	TNETV107X_ASR_D00,
-	TNETV107X_GPIO55,
-	TNETV107X_ASR_D01,
-	TNETV107X_GPIO56,
-	TNETV107X_ASR_D02,
-	TNETV107X_GPIO57,
-	TNETV107X_ASR_D03,
-	TNETV107X_GPIO58,
-	TNETV107X_ASR_D04,
-	TNETV107X_GPIO59_0,
-	TNETV107X_ASR_D05,
-	TNETV107X_GPIO60_0,
-	TNETV107X_ASR_D06,
-	TNETV107X_GPIO61_0,
-	TNETV107X_ASR_D07,
-	TNETV107X_GPIO62_0,
-	TNETV107X_ASR_D08,
-	TNETV107X_GPIO63_0,
-	TNETV107X_ASR_D09,
-	TNETV107X_GPIO64_0,
-	TNETV107X_ASR_D10,
-	TNETV107X_SDIO1_DATA3_1,
-	TNETV107X_ASR_D11,
-	TNETV107X_SDIO1_DATA2_1,
-	TNETV107X_ASR_D12,
-	TNETV107X_SDIO1_DATA1_1,
-	TNETV107X_ASR_D13,
-	TNETV107X_SDIO1_DATA0_1,
-	TNETV107X_ASR_D14,
-	TNETV107X_SDIO1_CMD_1,
-	TNETV107X_ASR_D15,
-	TNETV107X_SDIO1_CLK_1,
-	TNETV107X_ASR_OE,
-	TNETV107X_BOOT_STRP_2,
-	TNETV107X_ASR_RNW,
-	TNETV107X_GPIO29_0,
-	TNETV107X_ASR_WAIT,
-	TNETV107X_GPIO30_0,
-	TNETV107X_ASR_WE,
-	TNETV107X_BOOT_STRP_3,
-	TNETV107X_ASR_WE_DQM0,
-	TNETV107X_GPIO31,
-	TNETV107X_LCD_PD17_0,
-	TNETV107X_ASR_WE_DQM1,
-	TNETV107X_ASR_BA0_0,
-	TNETV107X_VLYNQ_CLK,
-	TNETV107X_GPIO14,
-	TNETV107X_LCD_PD19_0,
-	TNETV107X_VLYNQ_RXD0,
-	TNETV107X_GPIO15,
-	TNETV107X_LCD_PD20_0,
-	TNETV107X_VLYNQ_RXD1,
-	TNETV107X_GPIO16,
-	TNETV107X_LCD_PD21_0,
-	TNETV107X_VLYNQ_TXD0,
-	TNETV107X_GPIO17,
-	TNETV107X_LCD_PD22_0,
-	TNETV107X_VLYNQ_TXD1,
-	TNETV107X_GPIO18,
-	TNETV107X_LCD_PD23_0,
-	TNETV107X_SDIO0_CLK,
-	TNETV107X_GPIO19,
-	TNETV107X_SDIO0_CMD,
-	TNETV107X_GPIO20,
-	TNETV107X_SDIO0_DATA0,
-	TNETV107X_GPIO21,
-	TNETV107X_SDIO0_DATA1,
-	TNETV107X_GPIO22,
-	TNETV107X_SDIO0_DATA2,
-	TNETV107X_GPIO23,
-	TNETV107X_SDIO0_DATA3,
-	TNETV107X_GPIO24,
-	TNETV107X_EMU0,
-	TNETV107X_EMU1,
-	TNETV107X_RTCK,
-	TNETV107X_TRST_N,
-	TNETV107X_TCK,
-	TNETV107X_TDI,
-	TNETV107X_TDO,
-	TNETV107X_TMS,
-	TNETV107X_TDM1_CLK,
-	TNETV107X_TDM1_RX,
-	TNETV107X_TDM1_TX,
-	TNETV107X_TDM1_FS,
-	TNETV107X_KEYPAD_R0,
-	TNETV107X_KEYPAD_R1,
-	TNETV107X_KEYPAD_R2,
-	TNETV107X_KEYPAD_R3,
-	TNETV107X_KEYPAD_R4,
-	TNETV107X_KEYPAD_R5,
-	TNETV107X_KEYPAD_R6,
-	TNETV107X_GPIO12,
-	TNETV107X_KEYPAD_R7,
-	TNETV107X_GPIO10,
-	TNETV107X_KEYPAD_C0,
-	TNETV107X_KEYPAD_C1,
-	TNETV107X_KEYPAD_C2,
-	TNETV107X_KEYPAD_C3,
-	TNETV107X_KEYPAD_C4,
-	TNETV107X_KEYPAD_C5,
-	TNETV107X_KEYPAD_C6,
-	TNETV107X_GPIO13,
-	TNETV107X_TEST_CLK_IN,
-	TNETV107X_KEYPAD_C7,
-	TNETV107X_GPIO11,
-	TNETV107X_SSP0_0,
-	TNETV107X_SCC_DCLK,
-	TNETV107X_LCD_PD20_1,
-	TNETV107X_SSP0_1,
-	TNETV107X_SCC_CS_N,
-	TNETV107X_LCD_PD21_1,
-	TNETV107X_SSP0_2,
-	TNETV107X_SCC_D,
-	TNETV107X_LCD_PD22_1,
-	TNETV107X_SSP0_3,
-	TNETV107X_SCC_RESETN,
-	TNETV107X_LCD_PD23_1,
-	TNETV107X_SSP1_0,
-	TNETV107X_GPIO25,
-	TNETV107X_UART2_CTS,
-	TNETV107X_SSP1_1,
-	TNETV107X_GPIO26,
-	TNETV107X_UART2_RD,
-	TNETV107X_SSP1_2,
-	TNETV107X_GPIO27,
-	TNETV107X_UART2_RTS,
-	TNETV107X_SSP1_3,
-	TNETV107X_GPIO28,
-	TNETV107X_UART2_TD,
-	TNETV107X_UART0_CTS,
-	TNETV107X_UART0_RD,
-	TNETV107X_UART0_RTS,
-	TNETV107X_UART0_TD,
-	TNETV107X_UART1_RD,
-	TNETV107X_UART1_TD,
-	TNETV107X_LCD_AC_NCS,
-	TNETV107X_LCD_HSYNC_RNW,
-	TNETV107X_LCD_VSYNC_A0,
-	TNETV107X_LCD_MCLK,
-	TNETV107X_LCD_PD16_0,
-	TNETV107X_LCD_PCLK_E,
-	TNETV107X_LCD_PD00,
-	TNETV107X_LCD_PD01,
-	TNETV107X_LCD_PD02,
-	TNETV107X_LCD_PD03,
-	TNETV107X_LCD_PD04,
-	TNETV107X_LCD_PD05,
-	TNETV107X_LCD_PD06,
-	TNETV107X_LCD_PD07,
-	TNETV107X_LCD_PD08,
-	TNETV107X_GPIO59_1,
-	TNETV107X_LCD_PD09,
-	TNETV107X_GPIO60_1,
-	TNETV107X_LCD_PD10,
-	TNETV107X_ASR_BA0_1,
-	TNETV107X_GPIO61_1,
-	TNETV107X_LCD_PD11,
-	TNETV107X_GPIO62_1,
-	TNETV107X_LCD_PD12,
-	TNETV107X_GPIO63_1,
-	TNETV107X_LCD_PD13,
-	TNETV107X_GPIO64_1,
-	TNETV107X_LCD_PD14,
-	TNETV107X_GPIO29_1,
-	TNETV107X_LCD_PD15,
-	TNETV107X_GPIO30_1,
-	TNETV107X_EINT0,
-	TNETV107X_GPIO08,
-	TNETV107X_EINT1,
-	TNETV107X_GPIO09,
-	TNETV107X_GPIO00,
-	TNETV107X_LCD_PD20_2,
-	TNETV107X_TDM_CLK_IN_2,
-	TNETV107X_GPIO01,
-	TNETV107X_LCD_PD21_2,
-	TNETV107X_24M_CLK_OUT_1,
-	TNETV107X_GPIO02,
-	TNETV107X_LCD_PD22_2,
-	TNETV107X_GPIO03,
-	TNETV107X_LCD_PD23_2,
-	TNETV107X_GPIO04,
-	TNETV107X_LCD_PD16_1,
-	TNETV107X_USB0_RXERR,
-	TNETV107X_GPIO05,
-	TNETV107X_LCD_PD17_1,
-	TNETV107X_TDM_CLK_IN_1,
-	TNETV107X_GPIO06,
-	TNETV107X_LCD_PD18,
-	TNETV107X_24M_CLK_OUT_2,
-	TNETV107X_GPIO07,
-	TNETV107X_LCD_PD19_1,
-	TNETV107X_USB1_RXERR,
-	TNETV107X_ETH_PLL_CLK,
-	TNETV107X_MDIO,
-	TNETV107X_MDC,
-	TNETV107X_AIC_MUTE_STAT_N,
-	TNETV107X_TDM0_CLK,
-	TNETV107X_AIC_HNS_EN_N,
-	TNETV107X_TDM0_FS,
-	TNETV107X_AIC_HDS_EN_STAT_N,
-	TNETV107X_TDM0_TX,
-	TNETV107X_AIC_HNF_EN_STAT_N,
-	TNETV107X_TDM0_RX,
-};
-
 #define PINMUX(x)		(4 * (x))
 
 #ifdef CONFIG_DAVINCI_MUX
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 0a22710493fd..99d47cfa301f 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -182,53 +182,6 @@
 #define DA8XX_LPSC1_CR_P3_SS		26
 #define DA8XX_LPSC1_L3_CBA_RAM		31
 
-/* TNETV107X LPSC Assignments */
-#define TNETV107X_LPSC_ARM			0
-#define TNETV107X_LPSC_GEM			1
-#define TNETV107X_LPSC_DDR2_PHY			2
-#define TNETV107X_LPSC_TPCC			3
-#define TNETV107X_LPSC_TPTC0			4
-#define TNETV107X_LPSC_TPTC1			5
-#define TNETV107X_LPSC_RAM			6
-#define TNETV107X_LPSC_MBX_LITE			7
-#define TNETV107X_LPSC_LCD			8
-#define TNETV107X_LPSC_ETHSS			9
-#define TNETV107X_LPSC_AEMIF			10
-#define TNETV107X_LPSC_CHIP_CFG			11
-#define TNETV107X_LPSC_TSC			12
-#define TNETV107X_LPSC_ROM			13
-#define TNETV107X_LPSC_UART2			14
-#define TNETV107X_LPSC_PKTSEC			15
-#define TNETV107X_LPSC_SECCTL			16
-#define TNETV107X_LPSC_KEYMGR			17
-#define TNETV107X_LPSC_KEYPAD			18
-#define TNETV107X_LPSC_GPIO			19
-#define TNETV107X_LPSC_MDIO			20
-#define TNETV107X_LPSC_SDIO0			21
-#define TNETV107X_LPSC_UART0			22
-#define TNETV107X_LPSC_UART1			23
-#define TNETV107X_LPSC_TIMER0			24
-#define TNETV107X_LPSC_TIMER1			25
-#define TNETV107X_LPSC_WDT_ARM			26
-#define TNETV107X_LPSC_WDT_DSP			27
-#define TNETV107X_LPSC_SSP			28
-#define TNETV107X_LPSC_TDM0			29
-#define TNETV107X_LPSC_VLYNQ			30
-#define TNETV107X_LPSC_MCDMA			31
-#define TNETV107X_LPSC_USB0			32
-#define TNETV107X_LPSC_TDM1			33
-#define TNETV107X_LPSC_DEBUGSS			34
-#define TNETV107X_LPSC_ETHSS_RGMII		35
-#define TNETV107X_LPSC_SYSTEM			36
-#define TNETV107X_LPSC_IMCOP			37
-#define TNETV107X_LPSC_SPARE			38
-#define TNETV107X_LPSC_SDIO1			39
-#define TNETV107X_LPSC_USB1			40
-#define TNETV107X_LPSC_USBSS			41
-#define TNETV107X_LPSC_DDR2_EMIF1_VRST		42
-#define TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST	43
-#define TNETV107X_LPSC_MAX			44
-
 /* PSC register offsets */
 #define EPCPR		0x070
 #define PTCMD		0x120
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index ce402cd21fa0..d4b4aa87964f 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -23,14 +23,6 @@
 #define DA8XX_UART1_BASE	(IO_PHYS + 0x10c000)
 #define DA8XX_UART2_BASE	(IO_PHYS + 0x10d000)
 
-#define TNETV107X_UART0_BASE	0x08108100
-#define TNETV107X_UART1_BASE	0x08088400
-#define TNETV107X_UART2_BASE	0x08108300
-
-#define TNETV107X_UART0_VIRT	IOMEM(0xfee08100)
-#define TNETV107X_UART1_VIRT	IOMEM(0xfed88400)
-#define TNETV107X_UART2_VIRT	IOMEM(0xfee08300)
-
 /* DaVinci UART register offsets */
 #define UART_DAVINCI_PWREMU		0x0c
 #define UART_DM646X_SCR			0x10
diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h
deleted file mode 100644
index 9b885298f106..000000000000
--- a/arch/arm/mach-davinci/include/mach/timex.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * DaVinci timer defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * Alert: Not all timers of the DaVinci family run at a frequency of 27MHz,
- * but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/
- * linux/jiffies.h) are not used directly in code. Currently none of the
- * code relevant to DaVinci platform depends on these values directly.
- */
-#define CLOCK_TICK_RATE 27000000
-
-#endif /* __ASM_ARCH_TIMEX_H__ */
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
deleted file mode 100644
index 494fcf5ccfe1..000000000000
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Texas Instruments TNETV107X SoC Specific Defines
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_DAVINCI_TNETV107X_H
-#define __ASM_ARCH_DAVINCI_TNETV107X_H
-
-#include <asm/sizes.h>
-
-#define TNETV107X_DDR_BASE	0x80000000
-
-/*
- * Fixed mapping for early init starts here. If low-level debug is enabled,
- * this area also gets mapped via io_pg_offset and io_phys by the boot code.
- * To fit in with the io_pg_offset calculation, the io base address selected
- * here _must_ be a multiple of 2^20.
- */
-#define TNETV107X_IO_BASE	0x08000000
-#define TNETV107X_IO_VIRT	(IO_VIRT + SZ_1M)
-
-#define TNETV107X_N_GPIO	65
-
-#ifndef __ASSEMBLY__
-
-#include <linux/serial_8250.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/mfd/ti_ssp.h>
-#include <linux/reboot.h>
-
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <mach/serial.h>
-
-struct tnetv107x_device_info {
-	struct davinci_mmc_config	*mmc_config[2];  /* 2 controllers */
-	struct davinci_nand_pdata	*nand_config[4]; /* 4 chipsels */
-	struct matrix_keypad_platform_data *keypad_config;
-	struct ti_ssp_data		*ssp_config;
-};
-
-extern struct platform_device tnetv107x_wdt_device;
-extern struct platform_device tnetv107x_serial_device[];
-
-extern void tnetv107x_init(void);
-extern void tnetv107x_devices_init(struct tnetv107x_device_info *);
-extern void tnetv107x_irq_init(void);
-void tnetv107x_restart(enum reboot_mode mode, const char *cmd);
-
-#endif
-
-#endif /* __ASM_ARCH_DAVINCI_TNETV107X_H */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index f49c2916aa3a..8fb97b93b6bb 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -68,9 +68,6 @@ static inline void set_uart_info(u32 phys)
 #define DEBUG_LL_DA8XX(machine, port)				\
 	_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE)
 
-#define DEBUG_LL_TNETV107X(machine, port)			\
-	_DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE)
-
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {
 	/*
@@ -94,9 +91,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_DA8XX(davinci_da850_evm,	2);
 		DEBUG_LL_DA8XX(mityomapl138,		1);
 		DEBUG_LL_DA8XX(omapl138_hawkboard,	2);
-
-		/* TNETV107x boards */
-		DEBUG_LL_TNETV107X(tnetv107x,		1);
 	} while (0);
 }
 
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
deleted file mode 100644
index f4d7fbb24b3b..000000000000
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ /dev/null
@@ -1,766 +0,0 @@
-/*
- * Texas Instruments TNETV107X SoC Support
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/time.h>
-#include <mach/cputype.h>
-#include <mach/psc.h>
-#include <mach/cp_intc.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/tnetv107x.h>
-#include <mach/gpio-davinci.h>
-
-#include "clock.h"
-#include "mux.h"
-
-/* Base addresses for on-chip devices */
-#define TNETV107X_INTC_BASE			0x03000000
-#define TNETV107X_TIMER0_BASE			0x08086500
-#define TNETV107X_TIMER1_BASE			0x08086600
-#define TNETV107X_CHIP_CFG_BASE			0x08087000
-#define TNETV107X_GPIO_BASE			0x08088000
-#define TNETV107X_CLOCK_CONTROL_BASE		0x0808a000
-#define TNETV107X_PSC_BASE			0x0808b000
-
-/* Reference clock frequencies */
-#define OSC_FREQ_ONCHIP		(24000 * 1000)
-#define OSC_FREQ_OFFCHIP_SYS	(25000 * 1000)
-#define OSC_FREQ_OFFCHIP_ETH	(25000 * 1000)
-#define OSC_FREQ_OFFCHIP_TDM	(19200 * 1000)
-
-#define N_PLLS	3
-
-/* Clock Control Registers */
-struct clk_ctrl_regs {
-	u32	pll_bypass;
-	u32	_reserved0;
-	u32	gem_lrst;
-	u32	_reserved1;
-	u32	pll_unlock_stat;
-	u32	sys_unlock;
-	u32	eth_unlock;
-	u32	tdm_unlock;
-};
-
-/* SSPLL Registers */
-struct sspll_regs {
-	u32	modes;
-	u32	post_div;
-	u32	pre_div;
-	u32	mult_factor;
-	u32	divider_range;
-	u32	bw_divider;
-	u32	spr_amount;
-	u32	spr_rate_div;
-	u32	diag;
-};
-
-/* Watchdog Timer Registers */
-struct wdt_regs {
-	u32	kick_lock;
-	u32	kick;
-	u32	change_lock;
-	u32	change ;
-	u32	disable_lock;
-	u32	disable;
-	u32	prescale_lock;
-	u32	prescale;
-};
-
-static struct clk_ctrl_regs __iomem *clk_ctrl_regs;
-
-static struct sspll_regs __iomem *sspll_regs[N_PLLS];
-static int sspll_regs_base[N_PLLS] = { 0x40, 0x80, 0xc0 };
-
-/* PLL bypass bit shifts in clk_ctrl_regs->pll_bypass register */
-static u32 bypass_mask[N_PLLS] = { BIT(0), BIT(2), BIT(1) };
-
-/* offchip (external) reference clock frequencies */
-static u32 pll_ext_freq[] = {
-	OSC_FREQ_OFFCHIP_SYS,
-	OSC_FREQ_OFFCHIP_TDM,
-	OSC_FREQ_OFFCHIP_ETH
-};
-
-/* PSC control registers */
-static u32 psc_regs[] = { TNETV107X_PSC_BASE };
-
-/* Host map for interrupt controller */
-static u32 intc_host_map[] = { 0x01010000, 0x01010101, -1 };
-
-static unsigned long clk_sspll_recalc(struct clk *clk);
-
-/* Level 1 - the PLLs */
-#define define_pll_clk(cname, pll, divmask, base)	\
-	static struct pll_data pll_##cname##_data = {	\
-		.num		= pll,			\
-		.div_ratio_mask	= divmask,		\
-		.phys_base	= base +		\
-			TNETV107X_CLOCK_CONTROL_BASE,	\
-	};						\
-	static struct clk pll_##cname##_clk = {		\
-		.name		= "pll_" #cname "_clk",	\
-		.pll_data	= &pll_##cname##_data,	\
-		.flags		= CLK_PLL,		\
-		.recalc		= clk_sspll_recalc,	\
-	}
-
-define_pll_clk(sys, 0, 0x1ff, 0x600);
-define_pll_clk(tdm, 1, 0x0ff, 0x200);
-define_pll_clk(eth, 2, 0x0ff, 0x400);
-
-/* Level 2 - divided outputs from the PLLs */
-#define define_pll_div_clk(pll, cname, div)			\
-	static struct clk pll##_##cname##_clk = {		\
-		.name		= #pll "_" #cname "_clk",	\
-		.parent		= &pll_##pll##_clk,		\
-		.flags		= CLK_PLL,			\
-		.div_reg	= PLLDIV##div,			\
-		.set_rate	= davinci_set_sysclk_rate,	\
-	}
-
-define_pll_div_clk(sys, arm1176,	1);
-define_pll_div_clk(sys, dsp,		2);
-define_pll_div_clk(sys, ddr,		3);
-define_pll_div_clk(sys, full,		4);
-define_pll_div_clk(sys, lcd,		5);
-define_pll_div_clk(sys, vlynq_ref,	6);
-define_pll_div_clk(sys, tsc,		7);
-define_pll_div_clk(sys, half,		8);
-
-define_pll_div_clk(eth, 5mhz,		1);
-define_pll_div_clk(eth, 50mhz,		2);
-define_pll_div_clk(eth, 125mhz,		3);
-define_pll_div_clk(eth, 250mhz,		4);
-define_pll_div_clk(eth, 25mhz,		5);
-
-define_pll_div_clk(tdm, 0,		1);
-define_pll_div_clk(tdm, extra,		2);
-define_pll_div_clk(tdm, 1,		3);
-
-
-/* Level 3 - LPSC gated clocks */
-#define __lpsc_clk(cname, _parent, mod, flg)		\
-	static struct clk clk_##cname = {		\
-		.name		= #cname,		\
-		.parent		= &_parent,		\
-		.lpsc		= TNETV107X_LPSC_##mod,\
-		.flags		= flg,			\
-	}
-
-#define lpsc_clk_enabled(cname, parent, mod)		\
-	__lpsc_clk(cname, parent, mod, ALWAYS_ENABLED)
-
-#define lpsc_clk(cname, parent, mod)			\
-	__lpsc_clk(cname, parent, mod, 0)
-
-lpsc_clk_enabled(arm,		sys_arm1176_clk, ARM);
-lpsc_clk_enabled(gem,		sys_dsp_clk,	GEM);
-lpsc_clk_enabled(ddr2_phy,	sys_ddr_clk,	DDR2_PHY);
-lpsc_clk_enabled(tpcc,		sys_full_clk,	TPCC);
-lpsc_clk_enabled(tptc0,		sys_full_clk,	TPTC0);
-lpsc_clk_enabled(tptc1,		sys_full_clk,	TPTC1);
-lpsc_clk_enabled(ram,		sys_full_clk,	RAM);
-lpsc_clk_enabled(aemif,		sys_full_clk,	AEMIF);
-lpsc_clk_enabled(chipcfg,	sys_half_clk,	CHIP_CFG);
-lpsc_clk_enabled(rom,		sys_half_clk,	ROM);
-lpsc_clk_enabled(secctl,	sys_half_clk,	SECCTL);
-lpsc_clk_enabled(keymgr,	sys_half_clk,	KEYMGR);
-lpsc_clk_enabled(gpio,		sys_half_clk,	GPIO);
-lpsc_clk_enabled(debugss,	sys_half_clk,	DEBUGSS);
-lpsc_clk_enabled(system,	sys_half_clk,	SYSTEM);
-lpsc_clk_enabled(ddr2_vrst,	sys_ddr_clk,	DDR2_EMIF1_VRST);
-lpsc_clk_enabled(ddr2_vctl_rst,	sys_ddr_clk,	DDR2_EMIF2_VCTL_RST);
-lpsc_clk_enabled(wdt_arm,	sys_half_clk,	WDT_ARM);
-lpsc_clk_enabled(timer1,	sys_half_clk,	TIMER1);
-
-lpsc_clk(mbx_lite,	sys_arm1176_clk,	MBX_LITE);
-lpsc_clk(ethss,		eth_125mhz_clk,		ETHSS);
-lpsc_clk(tsc,		sys_tsc_clk,		TSC);
-lpsc_clk(uart0,		sys_half_clk,		UART0);
-lpsc_clk(uart1,		sys_half_clk,		UART1);
-lpsc_clk(uart2,		sys_half_clk,		UART2);
-lpsc_clk(pktsec,	sys_half_clk,		PKTSEC);
-lpsc_clk(keypad,	sys_half_clk,		KEYPAD);
-lpsc_clk(mdio,		sys_half_clk,		MDIO);
-lpsc_clk(sdio0,		sys_half_clk,		SDIO0);
-lpsc_clk(sdio1,		sys_half_clk,		SDIO1);
-lpsc_clk(timer0,	sys_half_clk,		TIMER0);
-lpsc_clk(wdt_dsp,	sys_half_clk,		WDT_DSP);
-lpsc_clk(ssp,		sys_half_clk,		SSP);
-lpsc_clk(tdm0,		tdm_0_clk,		TDM0);
-lpsc_clk(tdm1,		tdm_1_clk,		TDM1);
-lpsc_clk(vlynq,		sys_vlynq_ref_clk,	VLYNQ);
-lpsc_clk(mcdma,		sys_half_clk,		MCDMA);
-lpsc_clk(usbss,		sys_half_clk,		USBSS);
-lpsc_clk(usb0,		clk_usbss,		USB0);
-lpsc_clk(usb1,		clk_usbss,		USB1);
-lpsc_clk(ethss_rgmii,	eth_250mhz_clk,		ETHSS_RGMII);
-lpsc_clk(imcop,		sys_dsp_clk,		IMCOP);
-lpsc_clk(spare,		sys_half_clk,		SPARE);
-
-/* LCD needs a full power down to clear controller state */
-__lpsc_clk(lcd, sys_lcd_clk, LCD, PSC_SWRSTDISABLE);
-
-
-/* Level 4 - leaf clocks for LPSC modules shared across drivers */
-static struct clk clk_rng = { .name = "rng", .parent = &clk_pktsec };
-static struct clk clk_pka = { .name = "pka", .parent = &clk_pktsec };
-
-static struct clk_lookup clks[] = {
-	CLK(NULL,		"pll_sys_clk",		&pll_sys_clk),
-	CLK(NULL,		"pll_eth_clk",		&pll_eth_clk),
-	CLK(NULL,		"pll_tdm_clk",		&pll_tdm_clk),
-	CLK(NULL,		"sys_arm1176_clk",	&sys_arm1176_clk),
-	CLK(NULL,		"sys_dsp_clk",		&sys_dsp_clk),
-	CLK(NULL,		"sys_ddr_clk",		&sys_ddr_clk),
-	CLK(NULL,		"sys_full_clk",		&sys_full_clk),
-	CLK(NULL,		"sys_lcd_clk",		&sys_lcd_clk),
-	CLK(NULL,		"sys_vlynq_ref_clk",	&sys_vlynq_ref_clk),
-	CLK(NULL,		"sys_tsc_clk",		&sys_tsc_clk),
-	CLK(NULL,		"sys_half_clk",		&sys_half_clk),
-	CLK(NULL,		"eth_5mhz_clk",		&eth_5mhz_clk),
-	CLK(NULL,		"eth_50mhz_clk",	&eth_50mhz_clk),
-	CLK(NULL,		"eth_125mhz_clk",	&eth_125mhz_clk),
-	CLK(NULL,		"eth_250mhz_clk",	&eth_250mhz_clk),
-	CLK(NULL,		"eth_25mhz_clk",	&eth_25mhz_clk),
-	CLK(NULL,		"tdm_0_clk",		&tdm_0_clk),
-	CLK(NULL,		"tdm_extra_clk",	&tdm_extra_clk),
-	CLK(NULL,		"tdm_1_clk",		&tdm_1_clk),
-	CLK(NULL,		"clk_arm",		&clk_arm),
-	CLK(NULL,		"clk_gem",		&clk_gem),
-	CLK(NULL,		"clk_ddr2_phy",		&clk_ddr2_phy),
-	CLK(NULL,		"clk_tpcc",		&clk_tpcc),
-	CLK(NULL,		"clk_tptc0",		&clk_tptc0),
-	CLK(NULL,		"clk_tptc1",		&clk_tptc1),
-	CLK(NULL,		"clk_ram",		&clk_ram),
-	CLK(NULL,		"clk_mbx_lite",		&clk_mbx_lite),
-	CLK("tnetv107x-fb.0",	NULL,			&clk_lcd),
-	CLK(NULL,		"clk_ethss",		&clk_ethss),
-	CLK(NULL,		"aemif",		&clk_aemif),
-	CLK(NULL,		"clk_chipcfg",		&clk_chipcfg),
-	CLK("tnetv107x-ts.0",	NULL,			&clk_tsc),
-	CLK(NULL,		"clk_rom",		&clk_rom),
-	CLK("serial8250.2",     NULL,			&clk_uart2),
-	CLK(NULL,		"clk_pktsec",		&clk_pktsec),
-	CLK("tnetv107x-rng.0",	NULL,			&clk_rng),
-	CLK("tnetv107x-pka.0",	NULL,			&clk_pka),
-	CLK(NULL,		"clk_secctl",		&clk_secctl),
-	CLK(NULL,		"clk_keymgr",		&clk_keymgr),
-	CLK("tnetv107x-keypad.0", NULL,			&clk_keypad),
-	CLK(NULL,		"clk_gpio",		&clk_gpio),
-	CLK(NULL,		"clk_mdio",		&clk_mdio),
-	CLK("dm6441-mmc.0",	NULL,			&clk_sdio0),
-	CLK("serial8250.0",	NULL,			&clk_uart0),
-	CLK("serial8250.1",	NULL,			&clk_uart1),
-	CLK(NULL,		"timer0",		&clk_timer0),
-	CLK(NULL,		"timer1",		&clk_timer1),
-	CLK("tnetv107x_wdt.0",	NULL,			&clk_wdt_arm),
-	CLK(NULL,		"clk_wdt_dsp",		&clk_wdt_dsp),
-	CLK("ti-ssp",		NULL,			&clk_ssp),
-	CLK(NULL,		"clk_tdm0",		&clk_tdm0),
-	CLK(NULL,		"clk_vlynq",		&clk_vlynq),
-	CLK(NULL,		"clk_mcdma",		&clk_mcdma),
-	CLK(NULL,		"clk_usbss",		&clk_usbss),
-	CLK(NULL,		"clk_usb0",		&clk_usb0),
-	CLK(NULL,		"clk_usb1",		&clk_usb1),
-	CLK(NULL,		"clk_tdm1",		&clk_tdm1),
-	CLK(NULL,		"clk_debugss",		&clk_debugss),
-	CLK(NULL,		"clk_ethss_rgmii",	&clk_ethss_rgmii),
-	CLK(NULL,		"clk_system",		&clk_system),
-	CLK(NULL,		"clk_imcop",		&clk_imcop),
-	CLK(NULL,		"clk_spare",		&clk_spare),
-	CLK("dm6441-mmc.1",	NULL,			&clk_sdio1),
-	CLK(NULL,		"clk_ddr2_vrst",	&clk_ddr2_vrst),
-	CLK(NULL,		"clk_ddr2_vctl_rst",	&clk_ddr2_vctl_rst),
-	CLK(NULL,		NULL,			NULL),
-};
-
-static const struct mux_config pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-	MUX_CFG(TNETV107X, ASR_A00,		0, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO32,		0, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A01,		0, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO33,		0, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A02,		0, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO34,		0, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A03,		0, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO35,		0, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A04,		0, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO36,		0, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A05,		0, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO37,		0, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A06,		1, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO38,		1, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A07,		1, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO39,		1, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A08,		1, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO40,		1, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A09,		1, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO41,		1, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A10,		1, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO42,		1, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A11,		1, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, BOOT_STRP_0,		1, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A12,		2, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, BOOT_STRP_1,		2, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A13,		2, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO43,		2, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A14,		2, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO44,		2, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A15,		2, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO45,		2, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A16,		2, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO46,		2, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A17,		2, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO47,		2, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A18,		3, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO48,		3, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA3_0,	3, 0, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_A19,		3, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO49,		3, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA2_0,	3, 5, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_A20,		3, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO50,		3, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA1_0,	3, 10, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_A21,		3, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO51,		3, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA0_0,	3, 15, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_A22,		3, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO52,		3, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO1_CMD_0,		3, 20, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_A23,		3, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO53,		3, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO1_CLK_0,		3, 25, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_BA_1,		4, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO54,		4, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SYS_PLL_CLK,		4, 0, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_CS0,		4, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, ASR_CS1,		4, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, ASR_CS2,		4, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM_PLL_CLK,		4, 15, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_CS3,		4, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, ETH_PHY_CLK,		4, 20, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, ASR_D00,		4, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO55,		4, 25, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D01,		5, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO56,		5, 0, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D02,		5, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO57,		5, 5, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D03,		5, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO58,		5, 10, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D04,		5, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO59_0,		5, 15, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D05,		5, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO60_0,		5, 20, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D06,		5, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO61_0,		5, 25, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D07,		6, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO62_0,		6, 0, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D08,		6, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO63_0,		6, 5, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D09,		6, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO64_0,		6, 10, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D10,		6, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA3_1,	6, 15, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D11,		6, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA2_1,	6, 20, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D12,		6, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA1_1,	6, 25, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D13,		7, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA0_1,	7, 0, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D14,		7, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SDIO1_CMD_1,		7, 5, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D15,		7, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SDIO1_CLK_1,		7, 10, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_OE,		7, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, BOOT_STRP_2,		7, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_RNW,		7, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO29_0,		7, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_WAIT,		7, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO30_0,		7, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_WE,		8, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, BOOT_STRP_3,		8, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_WE_DQM0,		8, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO31,		8, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD17_0,		8, 5, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_WE_DQM1,		8, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, ASR_BA0_0,		8, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, VLYNQ_CLK,		9, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO14,		9, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD19_0,		9, 0, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, VLYNQ_RXD0,		9, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO15,		9, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD20_0,		9, 5, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, VLYNQ_RXD1,		9, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO16,		9, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD21_0,		9, 10, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, VLYNQ_TXD0,		9, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO17,		9, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD22_0,		9, 15, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, VLYNQ_TXD1,		9, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO18,		9, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD23_0,		9, 20, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, SDIO0_CLK,		10, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO19,		10, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO0_CMD,		10, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO20,		10, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO0_DATA0,		10, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO21,		10, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO0_DATA1,		10, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO22,		10, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO0_DATA2,		10, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO23,		10, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO0_DATA3,		10, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO24,		10, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, EMU0,		11, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, EMU1,		11, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, RTCK,		12, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TRST_N,		12, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TCK,			12, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDI,			12, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDO,			12, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TMS,			12, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM1_CLK,		13, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM1_RX,		13, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM1_TX,		13, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM1_FS,		13, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R0,		14, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R1,		14, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R2,		14, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R3,		14, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R4,		14, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R5,		14, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R6,		15, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO12,		15, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, KEYPAD_R7,		15, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO10,		15, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, KEYPAD_C0,		15, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_C1,		15, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_C2,		15, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_C3,		15, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_C4,		16, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_C5,		16, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_C6,		16, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO13,		16, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, TEST_CLK_IN,		16, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, KEYPAD_C7,		16, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO11,		16, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SSP0_0,		17, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SCC_DCLK,		17, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD20_1,		17, 0, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP0_1,		17, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SCC_CS_N,		17, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD21_1,		17, 5, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP0_2,		17, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SCC_D,		17, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD22_1,		17, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP0_3,		17, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SCC_RESETN,		17, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD23_1,		17, 15, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP1_0,		18, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO25,		18, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, UART2_CTS,		18, 0, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP1_1,		18, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO26,		18, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, UART2_RD,		18, 5, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP1_2,		18, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO27,		18, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, UART2_RTS,		18, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP1_3,		18, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO28,		18, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, UART2_TD,		18, 15, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, UART0_CTS,		19, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, UART0_RD,		19, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, UART0_RTS,		19, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, UART0_TD,		19, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, UART1_RD,		19, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, UART1_TD,		19, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_AC_NCS,		20, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_HSYNC_RNW,	20, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_VSYNC_A0,	20, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_MCLK,		20, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD16_0,		20, 15, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PCLK_E,		20, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD00,		20, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD01,		21, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD02,		21, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD03,		21, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD04,		21, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD05,		21, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD06,		21, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD07,		22, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD08,		22, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO59_1,		22, 5, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD09,		22, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO60_1,		22, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD10,		22, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, ASR_BA0_1,		22, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, GPIO61_1,		22, 15, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD11,		22, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO62_1,		22, 20, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD12,		22, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO63_1,		22, 25, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD13,		23, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO64_1,		23, 0, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD14,		23, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO29_1,		23, 5, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD15,		23, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO30_1,		23, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, EINT0,		24, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO08,		24, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, EINT1,		24, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO09,		24, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, GPIO00,		24, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD20_2,		24, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, TDM_CLK_IN_2,	24, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, GPIO01,		24, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD21_2,		24, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, 24M_CLK_OUT_1,	24, 15, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, GPIO02,		24, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD22_2,		24, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, GPIO03,		24, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD23_2,		24, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, GPIO04,		25, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD16_1,		25, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, USB0_RXERR,		25, 0, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, GPIO05,		25, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD17_1,		25, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, TDM_CLK_IN_1,	25, 5, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, GPIO06,		25, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD18,		25, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, 24M_CLK_OUT_2,	25, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, GPIO07,		25, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD19_1,		25, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, USB1_RXERR,		25, 15, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, ETH_PLL_CLK,		25, 15, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, MDIO,		26, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, MDC,			26, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, AIC_MUTE_STAT_N,	26, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM0_CLK,		26, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, AIC_HNS_EN_N,	26, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM0_FS,		26, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, AIC_HDS_EN_STAT_N,	26, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM0_TX,		26, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, AIC_HNF_EN_STAT_N,	26, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM0_RX,		26, 25, 0x1f, 0x04, false)
-#endif
-};
-
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static u8 irq_prios[TNETV107X_N_CP_INTC_IRQ] = {
-	/* fill in default priority 7 */
-	[0 ... (TNETV107X_N_CP_INTC_IRQ - 1)]	= 7,
-	/* now override as needed, e.g. [xxx] = 5 */
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb8a1,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_TNETV107X,
-		.name		= "tnetv107x rev 1.0",
-	},
-	{
-		.variant	= 0x1,
-		.part_no	= 0xb8a1,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_TNETV107X,
-		.name		= "tnetv107x rev 1.1/1.2",
-	},
-};
-
-static struct davinci_timer_instance timer_instance[2] = {
-	{
-		.base		= TNETV107X_TIMER0_BASE,
-		.bottom_irq	= IRQ_TNETV107X_TIMER_0_TINT12,
-		.top_irq	= IRQ_TNETV107X_TIMER_0_TINT34,
-	},
-	{
-		.base		= TNETV107X_TIMER1_BASE,
-		.bottom_irq	= IRQ_TNETV107X_TIMER_1_TINT12,
-		.top_irq	= IRQ_TNETV107X_TIMER_1_TINT34,
-	},
-};
-
-static struct davinci_timer_info timer_info = {
-	.timers		= timer_instance,
-	.clockevent_id	= T0_BOT,
-	.clocksource_id	= T0_TOP,
-};
-
-/*
- * TNETV107X platforms do not use the static mappings from Davinci
- * IO_PHYS/IO_VIRT. This SOC's interesting MMRs are at different addresses,
- * and changing IO_PHYS would break away from existing Davinci SOCs.
- *
- * The primary impact of the current model is that IO_ADDRESS() is not to be
- * used to map registers on TNETV107X.
- *
- * 1.	The first chunk is for INTC:  This needs to be mapped in via iotable
- *	because ioremap() does not seem to be operational at the time when
- *	irqs are initialized.  Without this, consistent dma init bombs.
- *
- * 2.	The second chunk maps in register areas that need to be populated into
- *	davinci_soc_info.  Note that alignment restrictions come into play if
- *	low-level debug is enabled (see note in <mach/tnetv107x.h>).
- */
-static struct map_desc io_desc[] = {
-	{	/* INTC */
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(TNETV107X_INTC_BASE),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE
-	},
-	{	/* Most of the rest */
-		.virtual	= TNETV107X_IO_VIRT,
-		.pfn		= __phys_to_pfn(TNETV107X_IO_BASE),
-		.length		= IO_SIZE - SZ_1M,
-		.type		= MT_DEVICE
-	},
-};
-
-static unsigned long clk_sspll_recalc(struct clk *clk)
-{
-	int		pll;
-	unsigned long	mult = 0, prediv = 1, postdiv = 1;
-	unsigned long	ref = OSC_FREQ_ONCHIP, ret;
-	u32		tmp;
-
-	if (WARN_ON(!clk->pll_data))
-		return clk->rate;
-
-	if (!clk_ctrl_regs) {
-		void __iomem *tmp;
-
-		tmp = ioremap(TNETV107X_CLOCK_CONTROL_BASE, SZ_4K);
-
-		if (WARN(!tmp, "failed ioremap for clock control regs\n"))
-			return clk->parent ? clk->parent->rate : 0;
-
-		for (pll = 0; pll < N_PLLS; pll++)
-			sspll_regs[pll] = tmp + sspll_regs_base[pll];
-
-		clk_ctrl_regs = tmp;
-	}
-
-	pll = clk->pll_data->num;
-
-	tmp = __raw_readl(&clk_ctrl_regs->pll_bypass);
-	if (!(tmp & bypass_mask[pll])) {
-		mult	= __raw_readl(&sspll_regs[pll]->mult_factor);
-		prediv	= __raw_readl(&sspll_regs[pll]->pre_div) + 1;
-		postdiv	= __raw_readl(&sspll_regs[pll]->post_div) + 1;
-	}
-
-	tmp = __raw_readl(clk->pll_data->base + PLLCTL);
-	if (tmp & PLLCTL_CLKMODE)
-		ref = pll_ext_freq[pll];
-
-	clk->pll_data->input_rate = ref;
-
-	tmp = __raw_readl(clk->pll_data->base + PLLCTL);
-	if (!(tmp & PLLCTL_PLLEN))
-		return ref;
-
-	ret = ref;
-	if (mult)
-		ret += ((unsigned long long)ref * mult) / 256;
-
-	ret /= (prediv * postdiv);
-
-	return ret;
-}
-
-static void tnetv107x_watchdog_reset(struct platform_device *pdev)
-{
-	struct wdt_regs __iomem *regs;
-
-	regs = ioremap(pdev->resource[0].start, SZ_4K);
-
-	/* disable watchdog */
-	__raw_writel(0x7777, &regs->disable_lock);
-	__raw_writel(0xcccc, &regs->disable_lock);
-	__raw_writel(0xdddd, &regs->disable_lock);
-	__raw_writel(0, &regs->disable);
-
-	/* program prescale */
-	__raw_writel(0x5a5a, &regs->prescale_lock);
-	__raw_writel(0xa5a5, &regs->prescale_lock);
-	__raw_writel(0, &regs->prescale);
-
-	/* program countdown */
-	__raw_writel(0x6666, &regs->change_lock);
-	__raw_writel(0xbbbb, &regs->change_lock);
-	__raw_writel(1, &regs->change);
-
-	/* enable watchdog */
-	__raw_writel(0x7777, &regs->disable_lock);
-	__raw_writel(0xcccc, &regs->disable_lock);
-	__raw_writel(0xdddd, &regs->disable_lock);
-	__raw_writel(1, &regs->disable);
-
-	/* kick */
-	__raw_writel(0x5555, &regs->kick_lock);
-	__raw_writel(0xaaaa, &regs->kick_lock);
-	__raw_writel(1, &regs->kick);
-}
-
-void tnetv107x_restart(enum reboot_mode mode, const char *cmd)
-{
-	tnetv107x_watchdog_reset(&tnetv107x_wdt_device);
-}
-
-static struct davinci_soc_info tnetv107x_soc_info = {
-	.io_desc		= io_desc,
-	.io_desc_num		= ARRAY_SIZE(io_desc),
-	.ids			= ids,
-	.ids_num		= ARRAY_SIZE(ids),
-	.jtag_id_reg		= TNETV107X_CHIP_CFG_BASE + 0x018,
-	.cpu_clks		= clks,
-	.psc_bases		= psc_regs,
-	.psc_bases_num		= ARRAY_SIZE(psc_regs),
-	.pinmux_base		= TNETV107X_CHIP_CFG_BASE + 0x150,
-	.pinmux_pins		= pins,
-	.pinmux_pins_num	= ARRAY_SIZE(pins),
-	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
-	.intc_base		= TNETV107X_INTC_BASE,
-	.intc_irq_prios		= irq_prios,
-	.intc_irq_num		= TNETV107X_N_CP_INTC_IRQ,
-	.intc_host_map		= intc_host_map,
-	.gpio_base		= TNETV107X_GPIO_BASE,
-	.gpio_type		= GPIO_TYPE_TNETV107X,
-	.gpio_num		= TNETV107X_N_GPIO,
-	.timer_info		= &timer_info,
-	.serial_dev		= tnetv107x_serial_device,
-};
-
-void __init tnetv107x_init(void)
-{
-	davinci_common_init(&tnetv107x_soc_info);
-}
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 0bc7cdf8cf46..d8c439c89ea9 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -20,18 +20,6 @@ config MACH_CM_A510
 	  Say 'Y' here if you want your kernel to support the
 	  CompuLab CM-A510 Board.
 
-config MACH_DOVE_DT
-	bool "Marvell Dove Flattened Device Tree"
-	select DOVE_CLK
-	select ORION_IRQCHIP
-	select ORION_TIMER
-	select REGULATOR
-	select REGULATOR_FIXED_VOLTAGE
-	select USE_OF
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Dove using flattened device tree.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index cbc5c0618788..b608a21919fb 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -2,5 +2,4 @@ obj-y				+= common.o
 obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
-obj-$(CONFIG_MACH_DOVE_DT)	+= board-dt.o
 obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index 5362df3df89f..f4a5b34489b7 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -21,6 +21,7 @@
 #define  CPU_CTRL_PCIE1_LINK	0x00000008
 
 #define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
+#define RSTOUTn_MASK_PHYS	(BRIDGE_PHYS_BASE + 0x0108)
 #define  SOFT_RESET_OUT_EN	0x00000004
 
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h
deleted file mode 100644
index 251d538541db..000000000000
--- a/arch/arm/mach-dove/include/mach/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index bc4344aa1009..4a5a7aedcb76 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -108,6 +108,38 @@ static int __initdata gpio2_irqs[4] = {
 	0,
 };
 
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Compiling with both non-DT and DT support enabled, will
+ * break asm irq handler used by non-DT boards. Therefore,
+ * we provide a C-style irq handler even for non-DT boards,
+ * if MULTI_IRQ_HANDLER is set.
+ */
+
+static void __iomem *dove_irq_base = IRQ_VIRT_BASE;
+
+static asmlinkage void
+__exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
+{
+	u32 stat;
+
+	stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF);
+	stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF);
+	if (stat) {
+		unsigned int hwirq = __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+	stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF);
+	stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF);
+	if (stat) {
+		unsigned int hwirq = 32 + __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+}
+#endif
+
 void __init dove_init_irq(void)
 {
 	int i;
@@ -115,6 +147,10 @@ void __init dove_init_irq(void)
 	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
 	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+	set_handle_irq(dove_legacy_handle_irq);
+#endif
+
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
 	 */
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 68ac934d4565..8254e716b095 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -206,7 +206,7 @@ ebsa110_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction ebsa110_timer_irq = {
 	.name		= "EBSA110 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= ebsa110_timer_interrupt,
 };
 
diff --git a/arch/arm/mach-ebsa110/include/mach/timex.h b/arch/arm/mach-ebsa110/include/mach/timex.h
deleted file mode 100644
index 4fb43b22a102..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  arch/arm/mach-ebsa110/include/mach/timex.h
- *
- *  Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA110 architecture timex specifications
- */
-
-/*
- * On the EBSA, the clock ticks at weird rates.
- * This is therefore not used to calculate the
- * divisor.
- */
-#define CLOCK_TICK_RATE		47894000
-
diff --git a/arch/arm/mach-efm32/include/mach/entry-macro.S b/arch/arm/mach-efm32/include/mach/entry-macro.S
deleted file mode 100644
index 322159d5ed91..000000000000
--- a/arch/arm/mach-efm32/include/mach/entry-macro.S
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * Empty file waiting for deletion once <mach/entry-macro.S> isn't needed any
- * more. Patch "ARM: v7-M: drop using mach/entry-macro.S" sitting in next.
- */
diff --git a/arch/arm/mach-efm32/include/mach/timex.h b/arch/arm/mach-efm32/include/mach/timex.h
deleted file mode 100644
index 7a8b26da6599..000000000000
--- a/arch/arm/mach-efm32/include/mach/timex.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * Empty file waiting for deletion once <mach/timex.h> isn't needed any more.
- */
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 157ba88433c9..0e571f1749d6 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -117,7 +117,7 @@ void __init ep93xx_map_io(void)
 #define EP93XX_TIMER4_CLOCK		983040
 
 #define TIMER1_RELOAD			((EP93XX_TIMER123_CLOCK / HZ) - 1)
-#define TIMER4_TICKS_PER_JIFFY		DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
+#define TIMER4_TICKS_PER_JIFFY		DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ)
 
 static unsigned int last_jiffy_time;
 
@@ -242,6 +242,7 @@ unsigned int ep93xx_chip_revision(void)
 	v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
 	return v;
 }
+EXPORT_SYMBOL_GPL(ep93xx_chip_revision);
 
 /*************************************************************************
  * EP93xx GPIO
diff --git a/arch/arm/mach-ep93xx/crunch-bits.S b/arch/arm/mach-ep93xx/crunch-bits.S
index 0ec9bb48fab9..e96923a3017b 100644
--- a/arch/arm/mach-ep93xx/crunch-bits.S
+++ b/arch/arm/mach-ep93xx/crunch-bits.S
@@ -16,6 +16,7 @@
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
+#include <asm/assembler.h>
 #include <mach/ep93xx-regs.h>
 
 /*
@@ -62,14 +63,16 @@
  * r9  = ret_from_exception
  * lr  = undefined instr exit
  *
- * called from prefetch exception handler with interrupts disabled
+ * called from prefetch exception handler with interrupts enabled
  */
 ENTRY(crunch_task_enable)
+	inc_preempt_count r10, r3
+
 	ldr	r8, =(EP93XX_APB_VIRT_BASE + 0x00130000)	@ syscon addr
 
 	ldr	r1, [r8, #0x80]
 	tst	r1, #0x00800000			@ access to crunch enabled?
-	movne	pc, lr				@ if so no business here
+	bne	2f				@ if so no business here
 	mov	r3, #0xaa			@ unlock syscon swlock
 	str	r3, [r8, #0xc0]
 	orr	r1, r1, #0x00800000		@ enable access to crunch
@@ -142,7 +145,7 @@ crunch_save:
 
 	teq		r0, #0				@ anything to load?
 	cfldr64eq	mvdx0, [r1, #CRUNCH_MVDX0]	@ mvdx0 was clobbered
-	moveq		pc, lr
+	beq		1f
 
 crunch_load:
 	cfldr64		mvdx0, [r0, #CRUNCH_DSPSC]	@ load status word
@@ -190,6 +193,11 @@ crunch_load:
 	cfldr64		mvdx14, [r0, #CRUNCH_MVDX14]
 	cfldr64		mvdx15, [r0, #CRUNCH_MVDX15]
 
+1:
+#ifdef CONFIG_PREEMPT_COUNT
+	get_thread_info r10
+#endif
+2:	dec_preempt_count r10, r3
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h
deleted file mode 100644
index 6b3503b01fa6..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/timex.h
- */
-
-#define CLOCK_TICK_RATE		983040
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 4c414af75ef0..d58995c9a95a 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -7,106 +7,102 @@
 
 # Configuration options for the EXYNOS4
 
+config ARCH_EXYNOS
+	bool "Samsung EXYNOS" if ARCH_MULTI_V7
+	select ARCH_HAS_BANDGAP
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select ARM_GIC
+	select COMMON_CLK_SAMSUNG
+	select HAVE_ARM_SCU if SMP
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
+	select PINCTRL
+	select PINCTRL_EXYNOS
+	select PM_GENERIC_DOMAINS if PM_RUNTIME
+	select S5P_DEV_MFC
+	select SRAM
+	help
+	  Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5)
+
 if ARCH_EXYNOS
 
 menu "SAMSUNG EXYNOS SoCs Support"
 
+config ARCH_EXYNOS3
+	bool "SAMSUNG EXYNOS3"
+	select ARM_CPU_SUSPEND if PM
+	help
+	  Samsung EXYNOS3 (Crotex-A7) SoC based systems
+
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
 	default y
-	select ARM_AMBA
-	select CLKSRC_OF
+	select ARM_CPU_SUSPEND if PM_SLEEP
 	select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
 	select CPU_EXYNOS4210
 	select GIC_NON_BANKED
 	select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
-	select HAVE_ARM_SCU if SMP
-	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select PINCTRL
-	select PM_GENERIC_DOMAINS if PM
-	select S5P_DEV_MFC
 	help
-	  Samsung EXYNOS4 SoCs based systems
+	  Samsung EXYNOS4 (Cortex-A9) SoC based systems
 
 config ARCH_EXYNOS5
 	bool "SAMSUNG EXYNOS5"
-	select ARM_AMBA
-	select CLKSRC_OF
-	select HAVE_ARM_SCU if SMP
-	select HAVE_SMP
-	select PINCTRL
-	select USB_ARCH_HAS_XHCI
+	default y
 	help
-	  Samsung EXYNOS5 (Cortex-A15) SoC based systems
+	  Samsung EXYNOS5 (Cortex-A15/A7) SoC based systems
 
 comment "EXYNOS SoCs"
 
+config SOC_EXYNOS3250
+	bool "SAMSUNG EXYNOS3250"
+	default y
+	depends on ARCH_EXYNOS3
+
 config CPU_EXYNOS4210
 	bool "SAMSUNG EXYNOS4210"
 	default y
 	depends on ARCH_EXYNOS4
-	select ARCH_HAS_BANDGAP
-	select ARM_CPU_SUSPEND if PM
-	select PINCTRL_EXYNOS
-	select S5P_PM if PM
-	select S5P_SLEEP if PM
-	select SAMSUNG_DMADEV
-	help
-	  Enable EXYNOS4210 CPU support
 
 config SOC_EXYNOS4212
 	bool "SAMSUNG EXYNOS4212"
 	default y
 	depends on ARCH_EXYNOS4
-	select ARCH_HAS_BANDGAP
-	select PINCTRL_EXYNOS
-	select S5P_PM if PM
-	select S5P_SLEEP if PM
-	select SAMSUNG_DMADEV
-	help
-	  Enable EXYNOS4212 SoC support
 
 config SOC_EXYNOS4412
 	bool "SAMSUNG EXYNOS4412"
 	default y
 	depends on ARCH_EXYNOS4
-	select ARCH_HAS_BANDGAP
-	select PINCTRL_EXYNOS
-	select SAMSUNG_DMADEV
-	help
-	  Enable EXYNOS4412 SoC support
 
 config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
-	select ARCH_HAS_BANDGAP
-	select PINCTRL_EXYNOS
-	select PM_GENERIC_DOMAINS if PM
-	select S5P_PM if PM
-	select S5P_SLEEP if PM
-	select S5P_DEV_MFC
-	select SAMSUNG_DMADEV
-	help
-	  Enable EXYNOS5250 SoC support
+
+config SOC_EXYNOS5260
+	bool "SAMSUNG EXYNOS5260"
+	default y
+	depends on ARCH_EXYNOS5
+
+config SOC_EXYNOS5410
+	bool "SAMSUNG EXYNOS5410"
+	default y
+	depends on ARCH_EXYNOS5
 
 config SOC_EXYNOS5420
 	bool "SAMSUNG EXYNOS5420"
 	default y
 	depends on ARCH_EXYNOS5
-	select PM_GENERIC_DOMAINS if PM
-	select S5P_PM if PM
-	select S5P_SLEEP if PM
-	help
-	  Enable EXYNOS5420 SoC support
 
 config SOC_EXYNOS5440
 	bool "SAMSUNG EXYNOS5440"
 	default y
 	depends on ARCH_EXYNOS5
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_OPP
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
@@ -117,6 +113,19 @@ config SOC_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support
 
+config SOC_EXYNOS5800
+	bool "SAMSUNG EXYNOS5800"
+	default y
+	depends on SOC_EXYNOS5420
+
 endmenu
 
+config EXYNOS5420_MCPM
+	bool "Exynos5420 Multi-Cluster PM support"
+	depends on MCPM && SOC_EXYNOS5420
+	select ARM_CCI
+	help
+	  This is needed to provide CPU and cluster power management
+	  on Exynos5420 implementing big.LITTLE.
+
 endif
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 8930b66b4abd..788f26d21141 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -5,6 +5,8 @@
 #
 # Licensed under GPLv2
 
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+
 obj-y				:=
 obj-m				:=
 obj-n				:=
@@ -12,25 +14,18 @@ obj-				:=
 
 # Core
 
-obj-$(CONFIG_ARCH_EXYNOS)	+= common.o
+obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o pmu.o exynos-smc.o firmware.o
 
-obj-$(CONFIG_S5P_PM)		+= pm.o
+obj-$(CONFIG_PM_SLEEP)		+= pm.o sleep.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
-obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
-
-obj-$(CONFIG_ARCH_EXYNOS)	+= pmu.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
-
-obj-$(CONFIG_ARCH_EXYNOS)	+= exynos-smc.o
-obj-$(CONFIG_ARCH_EXYNOS)	+= firmware.o
+CFLAGS_hotplug.o		+= -march=armv7-a
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
 
-# machine support
-
-obj-$(CONFIG_ARCH_EXYNOS4)	+= mach-exynos4-dt.o
-obj-$(CONFIG_ARCH_EXYNOS5)	+= mach-exynos5-dt.o
+obj-$(CONFIG_EXYNOS5420_MCPM)	+= mcpm-exynos.o
+CFLAGS_mcpm-exynos.o		+= -march=armv7-a
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index f76967b1c551..16617bdb37a9 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -15,18 +15,129 @@
 #include <linux/reboot.h>
 #include <linux/of.h>
 
+#define EXYNOS3250_SOC_ID	0xE3472000
+#define EXYNOS3_SOC_MASK	0xFFFFF000
+
+#define EXYNOS4210_CPU_ID	0x43210000
+#define EXYNOS4212_CPU_ID	0x43220000
+#define EXYNOS4412_CPU_ID	0xE4412200
+#define EXYNOS4_CPU_MASK	0xFFFE0000
+
+#define EXYNOS5250_SOC_ID	0x43520000
+#define EXYNOS5410_SOC_ID	0xE5410000
+#define EXYNOS5420_SOC_ID	0xE5420000
+#define EXYNOS5440_SOC_ID	0xE5440000
+#define EXYNOS5800_SOC_ID	0xE5422000
+#define EXYNOS5_SOC_MASK	0xFFFFF000
+
+extern unsigned long samsung_cpu_id;
+
+#define IS_SAMSUNG_CPU(name, id, mask)		\
+static inline int is_samsung_##name(void)	\
+{						\
+	return ((samsung_cpu_id & mask) == (id & mask));	\
+}
+
+IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
+IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
+
+#if defined(CONFIG_SOC_EXYNOS3250)
+# define soc_is_exynos3250()	is_samsung_exynos3250()
+#else
+# define soc_is_exynos3250()	0
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+# define soc_is_exynos4210()	is_samsung_exynos4210()
+#else
+# define soc_is_exynos4210()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212()	is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4412)
+# define soc_is_exynos4412()	is_samsung_exynos4412()
+#else
+# define soc_is_exynos4412()	0
+#endif
+
+#define EXYNOS4210_REV_0	(0x0)
+#define EXYNOS4210_REV_1_0	(0x10)
+#define EXYNOS4210_REV_1_1	(0x11)
+
+#if defined(CONFIG_SOC_EXYNOS5250)
+# define soc_is_exynos5250()	is_samsung_exynos5250()
+#else
+# define soc_is_exynos5250()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5410)
+# define soc_is_exynos5410()	is_samsung_exynos5410()
+#else
+# define soc_is_exynos5410()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5420)
+# define soc_is_exynos5420()	is_samsung_exynos5420()
+#else
+# define soc_is_exynos5420()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5440)
+# define soc_is_exynos5440()	is_samsung_exynos5440()
+#else
+# define soc_is_exynos5440()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5800)
+# define soc_is_exynos5800()	is_samsung_exynos5800()
+#else
+# define soc_is_exynos5800()	0
+#endif
+
+#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \
+			  soc_is_exynos4412())
+#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \
+			  soc_is_exynos5420() || soc_is_exynos5800())
+
 void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
 
 struct map_desc;
+extern void __iomem *sysram_ns_base_addr;
+extern void __iomem *sysram_base_addr;
 void exynos_init_io(void);
-void exynos4_restart(enum reboot_mode mode, const char *cmd);
-void exynos5_restart(enum reboot_mode mode, const char *cmd);
+void exynos_restart(enum reboot_mode mode, const char *cmd);
 void exynos_cpuidle_init(void);
 void exynos_cpufreq_init(void);
 void exynos_init_late(void);
 
 void exynos_firmware_init(void);
 
+#ifdef CONFIG_PINCTRL_EXYNOS
+extern u32 exynos_get_eint_wake_mask(void);
+#else
+static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+extern void __init exynos_pm_init(void);
+#else
+static inline void exynos_pm_init(void) {}
+#endif
+
+extern void exynos_cpu_resume(void);
+
 extern struct smp_operations exynos_smp_ops;
 
 extern void exynos_cpu_die(unsigned int cpu);
@@ -42,12 +153,21 @@ enum sys_powerdown {
 	NUM_SYS_POWERDOWN,
 };
 
-extern unsigned long l2x0_regs_phys;
 struct exynos_pmu_conf {
 	void __iomem *reg;
 	unsigned int val[NUM_SYS_POWERDOWN];
 };
 
 extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
+extern void exynos_cpu_power_down(int cpu);
+extern void exynos_cpu_power_up(int cpu);
+extern int  exynos_cpu_power_state(int cpu);
+extern void exynos_cluster_power_down(int cluster);
+extern void exynos_cluster_power_up(int cluster);
+extern int  exynos_cluster_power_state(int cluster);
+extern void exynos_enter_aftr(void);
+
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
+extern unsigned int samsung_rev(void);
 
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
deleted file mode 100644
index f57cb91f02aa..000000000000
--- a/arch/arm/mach-exynos/cpuidle.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/* linux/arch/arm/mach-exynos4/cpuidle.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/time.h>
-#include <linux/platform_device.h>
-
-#include <asm/proc-fns.h>
-#include <asm/smp_scu.h>
-#include <asm/suspend.h>
-#include <asm/unified.h>
-#include <asm/cpuidle.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include <mach/pm-core.h>
-#include <mach/map.h>
-
-#include "common.h"
-#include "regs-pmu.h"
-
-#define REG_DIRECTGO_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
-			(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
-#define REG_DIRECTGO_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
-			(S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))
-
-#define S5P_CHECK_AFTR		0xFCBA0D10
-
-#define EXYNOS5_PWR_CTRL1			(S5P_VA_CMU + 0x01020)
-#define EXYNOS5_PWR_CTRL2			(S5P_VA_CMU + 0x01024)
-
-#define PWR_CTRL1_CORE2_DOWN_RATIO		(7 << 28)
-#define PWR_CTRL1_CORE1_DOWN_RATIO		(7 << 16)
-#define PWR_CTRL1_DIV2_DOWN_EN			(1 << 9)
-#define PWR_CTRL1_DIV1_DOWN_EN			(1 << 8)
-#define PWR_CTRL1_USE_CORE1_WFE			(1 << 5)
-#define PWR_CTRL1_USE_CORE0_WFE			(1 << 4)
-#define PWR_CTRL1_USE_CORE1_WFI			(1 << 1)
-#define PWR_CTRL1_USE_CORE0_WFI			(1 << 0)
-
-#define PWR_CTRL2_DIV2_UP_EN			(1 << 25)
-#define PWR_CTRL2_DIV1_UP_EN			(1 << 24)
-#define PWR_CTRL2_DUR_STANDBY2_VAL		(1 << 16)
-#define PWR_CTRL2_DUR_STANDBY1_VAL		(1 << 8)
-#define PWR_CTRL2_CORE2_UP_RATIO		(1 << 4)
-#define PWR_CTRL2_CORE1_UP_RATIO		(1 << 0)
-
-static int exynos4_enter_lowpower(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index);
-
-static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
-
-static struct cpuidle_driver exynos4_idle_driver = {
-	.name			= "exynos4_idle",
-	.owner			= THIS_MODULE,
-	.states = {
-		[0] = ARM_CPUIDLE_WFI_STATE,
-		[1] = {
-			.enter			= exynos4_enter_lowpower,
-			.exit_latency		= 300,
-			.target_residency	= 100000,
-			.flags			= CPUIDLE_FLAG_TIME_VALID,
-			.name			= "C1",
-			.desc			= "ARM power down",
-		},
-	},
-	.state_count = 2,
-	.safe_state_index = 0,
-};
-
-/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
-static void exynos4_set_wakeupmask(void)
-{
-	__raw_writel(0x0000ff3e, S5P_WAKEUP_MASK);
-}
-
-static unsigned int g_pwr_ctrl, g_diag_reg;
-
-static void save_cpu_arch_register(void)
-{
-	/*read power control register*/
-	asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc");
-	/*read diagnostic register*/
-	asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
-	return;
-}
-
-static void restore_cpu_arch_register(void)
-{
-	/*write power control register*/
-	asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc");
-	/*write diagnostic register*/
-	asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
-	return;
-}
-
-static int idle_finisher(unsigned long flags)
-{
-	cpu_do_idle();
-	return 1;
-}
-
-static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	unsigned long tmp;
-
-	exynos4_set_wakeupmask();
-
-	/* Set value of power down register for aftr mode */
-	exynos_sys_powerdown_conf(SYS_AFTR);
-
-	__raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR);
-	__raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
-
-	save_cpu_arch_register();
-
-	/* Setting Central Sequence Register for power down mode */
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
-	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-
-	cpu_pm_enter();
-	cpu_suspend(0, idle_finisher);
-
-#ifdef CONFIG_SMP
-	if (!soc_is_exynos5250())
-		scu_enable(S5P_VA_SCU);
-#endif
-	cpu_pm_exit();
-
-	restore_cpu_arch_register();
-
-	/*
-	 * If PMU failed while entering sleep mode, WFI will be
-	 * ignored by PMU and then exiting cpu_do_idle().
-	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
-	 * in this situation.
-	 */
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
-		tmp |= S5P_CENTRAL_LOWPWR_CFG;
-		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-	}
-
-	/* Clear wakeup state register */
-	__raw_writel(0x0, S5P_WAKEUP_STAT);
-
-	return index;
-}
-
-static int exynos4_enter_lowpower(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	int new_index = index;
-
-	/* AFTR can only be entered when cores other than CPU0 are offline */
-	if (num_online_cpus() > 1 || dev->cpu != 0)
-		new_index = drv->safe_state_index;
-
-	if (new_index == 0)
-		return arm_cpuidle_simple_enter(dev, drv, new_index);
-	else
-		return exynos4_enter_core0_aftr(dev, drv, new_index);
-}
-
-static void __init exynos5_core_down_clk(void)
-{
-	unsigned int tmp;
-
-	/*
-	 * Enable arm clock down (in idle) and set arm divider
-	 * ratios in WFI/WFE state.
-	 */
-	tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \
-	      PWR_CTRL1_CORE1_DOWN_RATIO | \
-	      PWR_CTRL1_DIV2_DOWN_EN	 | \
-	      PWR_CTRL1_DIV1_DOWN_EN	 | \
-	      PWR_CTRL1_USE_CORE1_WFE	 | \
-	      PWR_CTRL1_USE_CORE0_WFE	 | \
-	      PWR_CTRL1_USE_CORE1_WFI	 | \
-	      PWR_CTRL1_USE_CORE0_WFI;
-	__raw_writel(tmp, EXYNOS5_PWR_CTRL1);
-
-	/*
-	 * Enable arm clock up (on exiting idle). Set arm divider
-	 * ratios when not in idle along with the standby duration
-	 * ratios.
-	 */
-	tmp = PWR_CTRL2_DIV2_UP_EN	 | \
-	      PWR_CTRL2_DIV1_UP_EN	 | \
-	      PWR_CTRL2_DUR_STANDBY2_VAL | \
-	      PWR_CTRL2_DUR_STANDBY1_VAL | \
-	      PWR_CTRL2_CORE2_UP_RATIO	 | \
-	      PWR_CTRL2_CORE1_UP_RATIO;
-	__raw_writel(tmp, EXYNOS5_PWR_CTRL2);
-}
-
-static int exynos_cpuidle_probe(struct platform_device *pdev)
-{
-	int cpu_id, ret;
-	struct cpuidle_device *device;
-
-	if (soc_is_exynos5250())
-		exynos5_core_down_clk();
-
-	if (soc_is_exynos5440())
-		exynos4_idle_driver.state_count = 1;
-
-	ret = cpuidle_register_driver(&exynos4_idle_driver);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register cpuidle driver\n");
-		return ret;
-	}
-
-	for_each_online_cpu(cpu_id) {
-		device = &per_cpu(exynos4_cpuidle_device, cpu_id);
-		device->cpu = cpu_id;
-
-		ret = cpuidle_register_device(device);
-		if (ret) {
-			dev_err(&pdev->dev, "failed to register cpuidle device\n");
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static struct platform_driver exynos_cpuidle_driver = {
-	.probe	= exynos_cpuidle_probe,
-	.driver = {
-		.name = "exynos_cpuidle",
-		.owner = THIS_MODULE,
-	},
-};
-
-module_platform_driver(exynos_cpuidle_driver);
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/exynos.c
index f18be40e5b21..90aab4d75d08 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -1,105 +1,35 @@
 /*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
+ * SAMSUNG EXYNOS Flattened Device Tree enabled machine
  *
- * Common Codes for EXYNOS
+ * Copyright (c) 2010-2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqchip.h>
+#include <linux/init.h>
 #include <linux/io.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <clocksource/samsung_pwm.h>
-#include <linux/sched.h>
-#include <linux/serial_core.h>
+#include <linux/kernel.h>
+#include <linux/serial_s3c.h>
 #include <linux/of.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/pm_domain.h>
-#include <linux/export.h>
-#include <linux/irqdomain.h>
 #include <linux/of_address.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/irqchip/chained_irq.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/pm_domain.h>
 
-#include <asm/proc-fns.h>
-#include <asm/exception.h>
+#include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/cacheflush.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/regs-serial.h>
+#include <asm/memory.h>
 
 #include "common.h"
+#include "mfc.h"
 #include "regs-pmu.h"
 
-#define L2_AUX_VAL 0x7C470001
-#define L2_AUX_MASK 0xC200ffff
-
-static const char name_exynos4210[] = "EXYNOS4210";
-static const char name_exynos4212[] = "EXYNOS4212";
-static const char name_exynos4412[] = "EXYNOS4412";
-static const char name_exynos5250[] = "EXYNOS5250";
-static const char name_exynos5420[] = "EXYNOS5420";
-static const char name_exynos5440[] = "EXYNOS5440";
-
-static void exynos4_map_io(void);
-static void exynos5_map_io(void);
-static int exynos_init(void);
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= EXYNOS4210_CPU_ID,
-		.idmask		= EXYNOS4_CPU_MASK,
-		.map_io		= exynos4_map_io,
-		.init		= exynos_init,
-		.name		= name_exynos4210,
-	}, {
-		.idcode		= EXYNOS4212_CPU_ID,
-		.idmask		= EXYNOS4_CPU_MASK,
-		.map_io		= exynos4_map_io,
-		.init		= exynos_init,
-		.name		= name_exynos4212,
-	}, {
-		.idcode		= EXYNOS4412_CPU_ID,
-		.idmask		= EXYNOS4_CPU_MASK,
-		.map_io		= exynos4_map_io,
-		.init		= exynos_init,
-		.name		= name_exynos4412,
-	}, {
-		.idcode		= EXYNOS5250_SOC_ID,
-		.idmask		= EXYNOS5_SOC_MASK,
-		.map_io		= exynos5_map_io,
-		.init		= exynos_init,
-		.name		= name_exynos5250,
-	}, {
-		.idcode		= EXYNOS5420_SOC_ID,
-		.idmask		= EXYNOS5_SOC_MASK,
-		.map_io		= exynos5_map_io,
-		.init		= exynos_init,
-		.name		= name_exynos5420,
-	}, {
-		.idcode		= EXYNOS5440_SOC_ID,
-		.idmask		= EXYNOS5_SOC_MASK,
-		.init		= exynos_init,
-		.name		= name_exynos5440,
-	},
-};
-
-/* Initial IO mappings */
-
 static struct map_desc exynos4_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S3C_VA_SYS,
@@ -179,51 +109,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 	},
 };
 
-static struct map_desc exynos4_iodesc0[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc1[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4210_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM_NS,
-		.pfn		= __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4x12_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM_NS,
-		.pfn		= __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos5250_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM_NS,
-		.pfn		= __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
 static struct map_desc exynos5_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S3C_VA_SYS,
@@ -246,11 +131,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSRAM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S5P_VA_CMU,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_CMU),
 		.length		= 144 * SZ_1K,
@@ -263,19 +143,11 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 	},
 };
 
-void exynos4_restart(enum reboot_mode mode, const char *cmd)
-{
-	__raw_writel(0x1, S5P_SWRESET);
-}
-
-void exynos5_restart(enum reboot_mode mode, const char *cmd)
+void exynos_restart(enum reboot_mode mode, const char *cmd)
 {
 	struct device_node *np;
-	u32 val;
-	void __iomem *addr;
-
-	val = 0x1;
-	addr = EXYNOS_SWRESET;
+	u32 val = 0x1;
+	void __iomem *addr = EXYNOS_SWRESET;
 
 	if (of_machine_is_compatible("samsung,exynos5440")) {
 		u32 status;
@@ -294,12 +166,16 @@ void exynos5_restart(enum reboot_mode mode, const char *cmd)
 }
 
 static struct platform_device exynos_cpuidle = {
-	.name		= "exynos_cpuidle",
-	.id		= -1,
+	.name              = "exynos_cpuidle",
+	.dev.platform_data = exynos_enter_aftr,
+	.id                = -1,
 };
 
 void __init exynos_cpuidle_init(void)
 {
+	if (soc_is_exynos5440())
+		return;
+
 	platform_device_register(&exynos_cpuidle);
 }
 
@@ -315,6 +191,7 @@ void __init exynos_init_late(void)
 		return;
 
 	pm_genpd_poweroff_unused();
+	exynos_pm_init();
 }
 
 static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
@@ -322,7 +199,7 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
 {
 	struct map_desc iodesc;
 	__be32 *reg;
-	unsigned long len;
+	int len;
 
 	if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") &&
 		!of_flat_dt_is_compatible(node, "samsung,exynos5440-clock"))
@@ -345,6 +222,14 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
  *
  * register the standard cpu IO areas
  */
+static void __init exynos_map_io(void)
+{
+	if (soc_is_exynos4())
+		iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+
+	if (soc_is_exynos5())
+		iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
+}
 
 void __init exynos_init_io(void)
 {
@@ -355,64 +240,85 @@ void __init exynos_init_io(void)
 	/* detect cpu id and rev. */
 	s5p_init_cpu(S5P_VA_CHIPID);
 
-	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+	exynos_map_io();
 }
 
-static void __init exynos4_map_io(void)
+static void __init exynos_dt_machine_init(void)
 {
-	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-
-	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
-		iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
-	else
-		iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
-
-	if (soc_is_exynos4210())
-		iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc));
-	if (soc_is_exynos4212() || soc_is_exynos4412())
-		iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc));
-}
+	struct device_node *i2c_np;
+	const char *i2c_compat = "samsung,s3c2440-i2c";
+	unsigned int tmp;
+	int id;
+
+	/*
+	 * Exynos5's legacy i2c controller and new high speed i2c
+	 * controller have muxed interrupt sources. By default the
+	 * interrupts for 4-channel HS-I2C controller are enabled.
+	 * If node for first four channels of legacy i2c controller
+	 * are available then re-configure the interrupts via the
+	 * system register.
+	 */
+	if (soc_is_exynos5()) {
+		for_each_compatible_node(i2c_np, NULL, i2c_compat) {
+			if (of_device_is_available(i2c_np)) {
+				id = of_alias_get_id(i2c_np, "i2c");
+				if (id < 4) {
+					tmp = readl(EXYNOS5_SYS_I2C_CFG);
+					writel(tmp & ~(0x1 << id),
+							EXYNOS5_SYS_I2C_CFG);
+				}
+			}
+		}
+	}
 
-static void __init exynos5_map_io(void)
-{
-	iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
+	exynos_cpuidle_init();
+	exynos_cpufreq_init();
 
-	if (soc_is_exynos5250())
-		iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-struct bus_type exynos_subsys = {
-	.name		= "exynos-core",
-	.dev_name	= "exynos-core",
+static char const *exynos_dt_compat[] __initconst = {
+	"samsung,exynos3",
+	"samsung,exynos3250",
+	"samsung,exynos4",
+	"samsung,exynos4210",
+	"samsung,exynos4212",
+	"samsung,exynos4412",
+	"samsung,exynos5",
+	"samsung,exynos5250",
+	"samsung,exynos5260",
+	"samsung,exynos5420",
+	"samsung,exynos5440",
+	NULL
 };
 
-static struct device exynos4_dev = {
-	.bus	= &exynos_subsys,
-};
-
-static int __init exynos_core_init(void)
-{
-	return subsys_system_register(&exynos_subsys, NULL);
-}
-core_initcall(exynos_core_init);
-
-static int __init exynos4_l2x0_cache_init(void)
+static void __init exynos_reserve(void)
 {
-	int ret;
-
-	ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
-	if (ret)
-		return ret;
-
-	l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
-	clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
-	return 0;
+#ifdef CONFIG_S5P_DEV_MFC
+	int i;
+	char *mfc_mem[] = {
+		"samsung,mfc-v5",
+		"samsung,mfc-v6",
+		"samsung,mfc-v7",
+	};
+
+	for (i = 0; i < ARRAY_SIZE(mfc_mem); i++)
+		if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i]))
+			break;
+#endif
 }
-early_initcall(exynos4_l2x0_cache_init);
 
-static int __init exynos_init(void)
-{
-	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
-	return device_register(&exynos4_dev);
-}
+DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
+	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.l2c_aux_val	= 0x3c400001,
+	.l2c_aux_mask	= 0xc20fffff,
+	.smp		= smp_ops(exynos_smp_ops),
+	.map_io		= exynos_init_io,
+	.init_early	= exynos_firmware_init,
+	.init_machine	= exynos_dt_machine_init,
+	.init_late	= exynos_init_late,
+	.dt_compat	= exynos_dt_compat,
+	.restart	= exynos_restart,
+	.reserve	= exynos_reserve,
+MACHINE_END
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 932129ef26c6..eb91d2350f8c 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -18,6 +18,7 @@
 
 #include <mach/map.h>
 
+#include "common.h"
 #include "smc.h"
 
 static int exynos_do_idle(void)
@@ -28,13 +29,36 @@ static int exynos_do_idle(void)
 
 static int exynos_cpu_boot(int cpu)
 {
+	/*
+	 * Exynos3250 doesn't need to send smc command for secondary CPU boot
+	 * because Exynos3250 removes WFE in secure mode.
+	 */
+	if (soc_is_exynos3250())
+		return 0;
+
+	/*
+	 * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
+	 * But, Exynos4212 has only one secondary CPU so second parameter
+	 * isn't used for informing secure firmware about CPU id.
+	 */
+	if (soc_is_exynos4212())
+		cpu = 0;
+
 	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
 	return 0;
 }
 
 static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 {
-	void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu;
+	void __iomem *boot_reg;
+
+	if (!sysram_ns_base_addr)
+		return -ENODEV;
+
+	boot_reg = sysram_ns_base_addr + 0x1c;
+
+	if (!soc_is_exynos4212() && !soc_is_exynos3250())
+		boot_reg += 4*cpu;
 
 	__raw_writel(boot_addr, boot_reg);
 	return 0;
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index 5eead530c6f8..69fa48397394 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -19,61 +19,9 @@
 #include <asm/cp15.h>
 #include <asm/smp_plat.h>
 
-#include <plat/cpu.h>
-
 #include "common.h"
 #include "regs-pmu.h"
 
-static inline void cpu_enter_lowpower_a9(void)
-{
-	unsigned int v;
-
-	asm volatile(
-	"	mcr	p15, 0, %1, c7, c5, 0\n"
-	"	mcr	p15, 0, %1, c7, c10, 4\n"
-	/*
-	 * Turn off coherency
-	 */
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, %3\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
-static inline void cpu_enter_lowpower_a15(void)
-{
-	unsigned int v;
-
-	asm volatile(
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C)
-	  : "cc");
-
-	flush_cache_louis();
-
-	asm volatile(
-	/*
-	* Turn off coherency
-	*/
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	: "=&r" (v)
-	: "Ir" (0x40)
-	: "cc");
-
-	isb();
-	dsb();
-}
-
 static inline void cpu_leave_lowpower(void)
 {
 	unsigned int v;
@@ -96,7 +44,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 
 		/* make cpu1 to be turned off at next WFI command */
 		if (cpu == 1)
-			__raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
+			exynos_cpu_power_down(cpu);
 
 		/*
 		 * here's the WFI
@@ -132,19 +80,8 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 void __ref exynos_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
-	int primary_part = 0;
 
-	/*
-	 * we're ready for shutdown now, so do it.
-	 * Exynos4 is A9 based while Exynos5 is A15; check the CPU part
-	 * number by reading the Main ID register and then perform the
-	 * appropriate sequence for entering low power.
-	 */
-	asm("mrc p15, 0, %0, c0, c0, 0" : "=r"(primary_part) : : "cc");
-	if ((primary_part & 0xfff0) == 0xc0f0)
-		cpu_enter_lowpower_a15();
-	else
-		cpu_enter_lowpower_a9();
+	v7_exit_coherency_flush(louis);
 
 	platform_do_lowpower(cpu, &spurious);
 
diff --git a/arch/arm/mach-exynos/include/mach/hardware.h b/arch/arm/mach-exynos/include/mach/hardware.h
deleted file mode 100644
index 5109eb232f23..000000000000
--- a/arch/arm/mach-exynos/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/hardware.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - Hardware support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 7b046b59d9ec..548269a60634 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -23,13 +23,6 @@
 
 #include <plat/map-s5p.h>
 
-#define EXYNOS4_PA_SYSRAM0		0x02025000
-#define EXYNOS4_PA_SYSRAM1		0x02020000
-#define EXYNOS5_PA_SYSRAM		0x02020000
-#define EXYNOS4210_PA_SYSRAM_NS		0x0203F000
-#define EXYNOS4x12_PA_SYSRAM_NS		0x0204F000
-#define EXYNOS5250_PA_SYSRAM_NS		0x0204F000
-
 #define EXYNOS_PA_CHIPID		0x10000000
 
 #define EXYNOS4_PA_SYSCON		0x10010000
diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h
deleted file mode 100644
index dc0697c2fa92..000000000000
--- a/arch/arm/mach-exynos/include/mach/pm-core.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/pm-core.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h,
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * EXYNOS4210 - PM core support for arch/arm/plat-s5p/pm.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PM_CORE_H
-#define __ASM_ARCH_PM_CORE_H __FILE__
-
-#include <linux/of.h>
-#include <mach/map.h>
-
-#define S5P_EINT_WAKEUP_MASK			(S5P_VA_PMU + 0x0604)
-#define S5P_WAKEUP_MASK				(S5P_VA_PMU + 0x0608)
-
-#ifdef CONFIG_PINCTRL_EXYNOS
-extern u32 exynos_get_eint_wake_mask(void);
-#else
-static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
-#endif
-
-static inline void s3c_pm_debug_init_uart(void)
-{
-	/* nothing here yet */
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
-	__raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
-	__raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
-	/* nothing here yet */
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
-	/* nothing here yet */
-}
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
-					   struct pm_uart_save *save)
-{
-	/* nothing here yet */
-}
-
-static inline void s3c_pm_restored_gpios(void)
-{
-	/* nothing here yet */
-}
-
-static inline void samsung_pm_saved_gpios(void)
-{
-	/* nothing here yet */
-}
-
-/* Compatibility definitions to make plat-samsung/pm.c compile */
-#define IRQ_EINT_BIT(x)		1
-#define s3c_irqwake_intallow	0
-#define s3c_irqwake_eintallow	0
-
-#endif /* __ASM_ARCH_PM_CORE_H */
diff --git a/arch/arm/mach-exynos/include/mach/timex.h b/arch/arm/mach-exynos/include/mach/timex.h
deleted file mode 100644
index 6d138750a708..000000000000
--- a/arch/arm/mach-exynos/include/mach/timex.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/timex.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (c) 2003-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Based on arch/arm/mach-s5p6442/include/mach/timex.h
- *
- * EXYNOS4 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H __FILE__
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
deleted file mode 100644
index 5d7ce36be46f..000000000000
--- a/arch/arm/mach-exynos/include/mach/uncompress.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H __FILE__
-
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static unsigned int __raw_readl(unsigned int ptr)
-{
-	return *((volatile unsigned int *)ptr);
-}
-
-static void arch_detect_cpu(void)
-{
-	u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID);
-
-	/*
-	 * product_id is bits 31:12
-	 * bits 23:20 describe the exynosX family
-	 * bits 27:24 describe the exynosX family in exynos5420
-	 */
-	chip_id >>= 20;
-
-	if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50)
-		uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-	else
-		uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-
-	/*
-	 * For preventing FIFO overrun or infinite loop of UART console,
-	 * fifo_max should be the minimum fifo size of all of the UART channels
-	 */
-	fifo_mask = S5PV210_UFSTAT_TXMASK;
-	fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
-}
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
deleted file mode 100644
index d3e54b7644d7..000000000000
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Samsung's EXYNOS4 flattened device tree enabled machine
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/of_platform.h>
-#include <linux/of_fdt.h>
-
-#include <asm/mach/arch.h>
-#include <plat/mfc.h>
-
-#include "common.h"
-
-static void __init exynos4_dt_machine_init(void)
-{
-	exynos_cpuidle_init();
-	exynos_cpufreq_init();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static char const *exynos4_dt_compat[] __initdata = {
-	"samsung,exynos4210",
-	"samsung,exynos4212",
-	"samsung,exynos4412",
-	NULL
-};
-
-static void __init exynos4_reserve(void)
-{
-#ifdef CONFIG_S5P_DEV_MFC
-	struct s5p_mfc_dt_meminfo mfc_mem;
-
-	/* Reserve memory for MFC only if it's available */
-	mfc_mem.compatible = "samsung,mfc-v5";
-	if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
-		s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
-				mfc_mem.lsize);
-#endif
-}
-DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
-	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
-	.smp		= smp_ops(exynos_smp_ops),
-	.map_io		= exynos_init_io,
-	.init_early	= exynos_firmware_init,
-	.init_machine	= exynos4_dt_machine_init,
-	.init_late	= exynos_init_late,
-	.dt_compat	= exynos4_dt_compat,
-	.restart        = exynos4_restart,
-	.reserve	= exynos4_reserve,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
deleted file mode 100644
index 37ea261f0f6c..000000000000
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * SAMSUNG EXYNOS5250 Flattened Device Tree enabled machine
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/of_platform.h>
-#include <linux/of_fdt.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <plat/mfc.h>
-
-#include "common.h"
-#include "regs-pmu.h"
-
-static void __init exynos5_dt_machine_init(void)
-{
-	struct device_node *i2c_np;
-	const char *i2c_compat = "samsung,s3c2440-i2c";
-	unsigned int tmp;
-
-	/*
-	 * Exynos5's legacy i2c controller and new high speed i2c
-	 * controller have muxed interrupt sources. By default the
-	 * interrupts for 4-channel HS-I2C controller are enabled.
-	 * If node for first four channels of legacy i2c controller
-	 * are available then re-configure the interrupts via the
-	 * system register.
-	 */
-	for_each_compatible_node(i2c_np, NULL, i2c_compat) {
-		if (of_device_is_available(i2c_np)) {
-			if (of_alias_get_id(i2c_np, "i2c") < 4) {
-				tmp = readl(EXYNOS5_SYS_I2C_CFG);
-				writel(tmp & ~(0x1 << of_alias_get_id(i2c_np, "i2c")),
-						EXYNOS5_SYS_I2C_CFG);
-			}
-		}
-	}
-
-	exynos_cpuidle_init();
-	exynos_cpufreq_init();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static char const *exynos5_dt_compat[] __initdata = {
-	"samsung,exynos5250",
-	"samsung,exynos5420",
-	"samsung,exynos5440",
-	NULL
-};
-
-static void __init exynos5_reserve(void)
-{
-#ifdef CONFIG_S5P_DEV_MFC
-	struct s5p_mfc_dt_meminfo mfc_mem;
-
-	/* Reserve memory for MFC only if it's available */
-	mfc_mem.compatible = "samsung,mfc-v6";
-	if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
-		s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
-				mfc_mem.lsize);
-#endif
-}
-
-DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.smp		= smp_ops(exynos_smp_ops),
-	.map_io		= exynos_init_io,
-	.init_machine	= exynos5_dt_machine_init,
-	.init_late	= exynos_init_late,
-	.dt_compat	= exynos5_dt_compat,
-	.restart        = exynos5_restart,
-	.reserve	= exynos5_reserve,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
new file mode 100644
index 000000000000..0498d0b887ef
--- /dev/null
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -0,0 +1,357 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * arch/arm/mach-exynos/mcpm-exynos.c
+ *
+ * Based on arch/arm/mach-vexpress/dcscb.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/arm-cci.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+#include <asm/mcpm.h>
+
+#include "regs-pmu.h"
+#include "common.h"
+
+#define EXYNOS5420_CPUS_PER_CLUSTER	4
+#define EXYNOS5420_NR_CLUSTERS		2
+#define MCPM_BOOT_ADDR_OFFSET		0x1c
+
+/*
+ * The common v7_exit_coherency_flush API could not be used because of the
+ * Erratum 799270 workaround. This macro is the same as the common one (in
+ * arch/arm/include/asm/cacheflush.h) except for the erratum handling.
+ */
+#define exynos_v7_exit_coherency_flush(level) \
+	asm volatile( \
+	"stmfd	sp!, {fp, ip}\n\t"\
+	"mrc	p15, 0, r0, c1, c0, 0	@ get SCTLR\n\t" \
+	"bic	r0, r0, #"__stringify(CR_C)"\n\t" \
+	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR\n\t" \
+	"isb\n\t"\
+	"bl	v7_flush_dcache_"__stringify(level)"\n\t" \
+	"clrex\n\t"\
+	"mrc	p15, 0, r0, c1, c0, 1	@ get ACTLR\n\t" \
+	"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t" \
+	/* Dummy Load of a device register to avoid Erratum 799270 */ \
+	"ldr	r4, [%0]\n\t" \
+	"and	r4, r4, #0\n\t" \
+	"orr	r0, r0, r4\n\t" \
+	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR\n\t" \
+	"isb\n\t" \
+	"dsb\n\t" \
+	"ldmfd	sp!, {fp, ip}" \
+	: \
+	: "Ir" (S5P_INFORM0) \
+	: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
+	  "r9", "r10", "lr", "memory")
+
+/*
+ * We can't use regular spinlocks. In the switcher case, it is possible
+ * for an outbound CPU to call power_down() after its inbound counterpart
+ * is already live using the same logical CPU number which trips lockdep
+ * debugging.
+ */
+static arch_spinlock_t exynos_mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+static int
+cpu_use_count[EXYNOS5420_CPUS_PER_CLUSTER][EXYNOS5420_NR_CLUSTERS];
+
+#define exynos_cluster_usecnt(cluster) \
+	(cpu_use_count[0][cluster] +   \
+	 cpu_use_count[1][cluster] +   \
+	 cpu_use_count[2][cluster] +   \
+	 cpu_use_count[3][cluster])
+
+#define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster)
+
+static int exynos_cluster_power_control(unsigned int cluster, int enable)
+{
+	unsigned int tries = 100;
+	unsigned int val;
+
+	if (enable) {
+		exynos_cluster_power_up(cluster);
+		val = S5P_CORE_LOCAL_PWR_EN;
+	} else {
+		exynos_cluster_power_down(cluster);
+		val = 0;
+	}
+
+	/* Wait until cluster power control is applied */
+	while (tries--) {
+		if (exynos_cluster_power_state(cluster) == val)
+			return 0;
+
+		cpu_relax();
+	}
+	pr_debug("timed out waiting for cluster %u to power %s\n", cluster,
+		enable ? "on" : "off");
+
+	return -ETIMEDOUT;
+}
+
+static int exynos_power_up(unsigned int cpu, unsigned int cluster)
+{
+	unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+	int err = 0;
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
+		cluster >= EXYNOS5420_NR_CLUSTERS)
+		return -EINVAL;
+
+	/*
+	 * Since this is called with IRQs enabled, and no arch_spin_lock_irq
+	 * variant exists, we need to disable IRQs manually here.
+	 */
+	local_irq_disable();
+	arch_spin_lock(&exynos_mcpm_lock);
+
+	cpu_use_count[cpu][cluster]++;
+	if (cpu_use_count[cpu][cluster] == 1) {
+		bool was_cluster_down =
+			(exynos_cluster_usecnt(cluster) == 1);
+
+		/*
+		 * Turn on the cluster (L2/COMMON) and then power on the
+		 * cores.
+		 */
+		if (was_cluster_down)
+			err = exynos_cluster_power_control(cluster, 1);
+
+		if (!err)
+			exynos_cpu_power_up(cpunr);
+		else
+			exynos_cluster_power_control(cluster, 0);
+	} else if (cpu_use_count[cpu][cluster] != 2) {
+		/*
+		 * The only possible values are:
+		 * 0 = CPU down
+		 * 1 = CPU (still) up
+		 * 2 = CPU requested to be up before it had a chance
+		 *     to actually make itself down.
+		 * Any other value is a bug.
+		 */
+		BUG();
+	}
+
+	arch_spin_unlock(&exynos_mcpm_lock);
+	local_irq_enable();
+
+	return err;
+}
+
+/*
+ * NOTE: This function requires the stack data to be visible through power down
+ * and can only be executed on processors like A15 and A7 that hit the cache
+ * with the C bit clear in the SCTLR register.
+ */
+static void exynos_power_down(void)
+{
+	unsigned int mpidr, cpu, cluster;
+	bool last_man = false, skip_wfi = false;
+	unsigned int cpunr;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	cpunr =  cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
+			cluster >= EXYNOS5420_NR_CLUSTERS);
+
+	__mcpm_cpu_going_down(cpu, cluster);
+
+	arch_spin_lock(&exynos_mcpm_lock);
+	BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+	cpu_use_count[cpu][cluster]--;
+	if (cpu_use_count[cpu][cluster] == 0) {
+		exynos_cpu_power_down(cpunr);
+
+		if (exynos_cluster_unused(cluster))
+			/* TODO: Turn off the cluster here to save power. */
+			last_man = true;
+	} else if (cpu_use_count[cpu][cluster] == 1) {
+		/*
+		 * A power_up request went ahead of us.
+		 * Even if we do not want to shut this CPU down,
+		 * the caller expects a certain state as if the WFI
+		 * was aborted.  So let's continue with cache cleaning.
+		 */
+		skip_wfi = true;
+	} else {
+		BUG();
+	}
+
+	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
+		arch_spin_unlock(&exynos_mcpm_lock);
+
+		if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) {
+			/*
+			 * On the Cortex-A15 we need to disable
+			 * L2 prefetching before flushing the cache.
+			 */
+			asm volatile(
+			"mcr	p15, 1, %0, c15, c0, 3\n\t"
+			"isb\n\t"
+			"dsb"
+			: : "r" (0x400));
+		}
+
+		/* Flush all cache levels for this cluster. */
+		exynos_v7_exit_coherency_flush(all);
+
+		/*
+		 * Disable cluster-level coherency by masking
+		 * incoming snoops and DVM messages:
+		 */
+		cci_disable_port_by_cpu(mpidr);
+
+		__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+	} else {
+		arch_spin_unlock(&exynos_mcpm_lock);
+
+		/* Disable and flush the local CPU cache. */
+		exynos_v7_exit_coherency_flush(louis);
+	}
+
+	__mcpm_cpu_down(cpu, cluster);
+
+	/* Now we are prepared for power-down, do it: */
+	if (!skip_wfi)
+		wfi();
+
+	/* Not dead at this point?  Let our caller cope. */
+}
+
+static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
+{
+	unsigned int tries = 100;
+	unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
+			cluster >= EXYNOS5420_NR_CLUSTERS);
+
+	/* Wait for the core state to be OFF */
+	while (tries--) {
+		if (ACCESS_ONCE(cpu_use_count[cpu][cluster]) == 0) {
+			if ((exynos_cpu_power_state(cpunr) == 0))
+				return 0; /* success: the CPU is halted */
+		}
+
+		/* Otherwise, wait and retry: */
+		msleep(1);
+	}
+
+	return -ETIMEDOUT; /* timeout */
+}
+
+static const struct mcpm_platform_ops exynos_power_ops = {
+	.power_up		= exynos_power_up,
+	.power_down		= exynos_power_down,
+	.wait_for_powerdown	= exynos_wait_for_powerdown,
+};
+
+static void __init exynos_mcpm_usage_count_init(void)
+{
+	unsigned int mpidr, cpu, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER  ||
+			cluster >= EXYNOS5420_NR_CLUSTERS);
+
+	cpu_use_count[cpu][cluster] = 1;
+}
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ */
+static void __naked exynos_pm_power_up_setup(unsigned int affinity_level)
+{
+	asm volatile ("\n"
+	"cmp	r0, #1\n"
+	"bxne	lr\n"
+	"b	cci_enable_port_for_self");
+}
+
+static const struct of_device_id exynos_dt_mcpm_match[] = {
+	{ .compatible = "samsung,exynos5420" },
+	{ .compatible = "samsung,exynos5800" },
+	{},
+};
+
+static int __init exynos_mcpm_init(void)
+{
+	struct device_node *node;
+	void __iomem *ns_sram_base_addr;
+	int ret;
+
+	node = of_find_matching_node(NULL, exynos_dt_mcpm_match);
+	if (!node)
+		return -ENODEV;
+	of_node_put(node);
+
+	if (!cci_probed())
+		return -ENODEV;
+
+	node = of_find_compatible_node(NULL, NULL,
+			"samsung,exynos4210-sysram-ns");
+	if (!node)
+		return -ENODEV;
+
+	ns_sram_base_addr = of_iomap(node, 0);
+	of_node_put(node);
+	if (!ns_sram_base_addr) {
+		pr_err("failed to map non-secure iRAM base address\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * To increase the stability of KFC reset we need to program
+	 * the PMU SPARE3 register
+	 */
+	__raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3);
+
+	exynos_mcpm_usage_count_init();
+
+	ret = mcpm_platform_register(&exynos_power_ops);
+	if (!ret)
+		ret = mcpm_sync_init(exynos_pm_power_up_setup);
+	if (ret) {
+		iounmap(ns_sram_base_addr);
+		return ret;
+	}
+
+	mcpm_smp_set_ops();
+
+	pr_info("Exynos MCPM support installed\n");
+
+	/*
+	 * Future entries into the kernel can now go
+	 * through the cluster entry vectors.
+	 */
+	__raw_writel(virt_to_phys(mcpm_entry_point),
+			ns_sram_base_addr + MCPM_BOOT_ADDR_OFFSET);
+
+	iounmap(ns_sram_base_addr);
+
+	return ret;
+}
+
+early_initcall(exynos_mcpm_init);
diff --git a/arch/arm/mach-exynos/mfc.h b/arch/arm/mach-exynos/mfc.h
new file mode 100644
index 000000000000..dec93cd5b3c6
--- /dev/null
+++ b/arch/arm/mach-exynos/mfc.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MACH_EXYNOS_MFC_H
+#define __MACH_EXYNOS_MFC_H __FILE__
+
+int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
+				int depth, void *data);
+
+#endif /* __MACH_EXYNOS_MFC_H */
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 8ea02f63fed9..ec02422e8499 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -20,26 +20,45 @@
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/of_address.h>
 
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/firmware.h>
 
-#include <mach/hardware.h>
-
-#include <plat/cpu.h>
-
 #include "common.h"
 #include "regs-pmu.h"
 
 extern void exynos4_secondary_startup(void);
 
+void __iomem *sysram_base_addr;
+void __iomem *sysram_ns_base_addr;
+
+static void __init exynos_smp_prepare_sysram(void)
+{
+	struct device_node *node;
+
+	for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
+		if (!of_device_is_available(node))
+			continue;
+		sysram_base_addr = of_iomap(node, 0);
+		break;
+	}
+
+	for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
+		if (!of_device_is_available(node))
+			continue;
+		sysram_ns_base_addr = of_iomap(node, 0);
+		break;
+	}
+}
+
 static inline void __iomem *cpu_boot_reg_base(void)
 {
 	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
 		return S5P_INFORM5;
-	return S5P_VA_SYSRAM;
+	return sysram_base_addr;
 }
 
 static inline void __iomem *cpu_boot_reg(int cpu)
@@ -47,9 +66,11 @@ static inline void __iomem *cpu_boot_reg(int cpu)
 	void __iomem *boot_reg;
 
 	boot_reg = cpu_boot_reg_base();
+	if (!boot_reg)
+		return ERR_PTR(-ENODEV);
 	if (soc_is_exynos4412())
 		boot_reg += 4*cpu;
-	else if (soc_is_exynos5420())
+	else if (soc_is_exynos5420() || soc_is_exynos5800())
 		boot_reg += 4;
 	return boot_reg;
 }
@@ -92,6 +113,7 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 	unsigned long phys_cpu = cpu_logical_map(cpu);
+	int ret = -ENOSYS;
 
 	/*
 	 * Set synchronisation state between this boot processor
@@ -109,15 +131,12 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 */
 	write_pen_release(phys_cpu);
 
-	if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
-		__raw_writel(S5P_CORE_LOCAL_PWR_EN,
-			     S5P_ARM_CORE1_CONFIGURATION);
-
+	if (!exynos_cpu_power_state(cpu)) {
+		exynos_cpu_power_up(cpu);
 		timeout = 10;
 
 		/* wait max 10 ms until cpu1 is on */
-		while ((__raw_readl(S5P_ARM_CORE1_STATUS)
-			& S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
+		while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) {
 			if (timeout-- == 0)
 				break;
 
@@ -148,8 +167,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		 * Try to set boot address using firmware first
 		 * and fall back to boot register if it fails.
 		 */
-		if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr))
+		ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+		if (ret && ret != -ENOSYS)
+			goto fail;
+		if (ret == -ENOSYS) {
+			void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+
+			if (IS_ERR(boot_reg)) {
+				ret = PTR_ERR(boot_reg);
+				goto fail;
+			}
 			__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+		}
 
 		call_firmware_op(cpu_boot, phys_cpu);
 
@@ -165,9 +194,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * now the secondary core is starting up let it run its
 	 * calibrations, then wait for it to finish
 	 */
+fail:
 	spin_unlock(&boot_lock);
 
-	return pen_release != -1 ? -ENOSYS : 0;
+	return pen_release != -1 ? ret : 0;
 }
 
 /*
@@ -207,6 +237,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 	if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
 		scu_enable(scu_base_addr());
 
+	exynos_smp_prepare_sysram();
+
 	/*
 	 * Write the address of secondary startup into the
 	 * system-wide flags register. The boot monitor waits
@@ -219,12 +251,21 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 1; i < max_cpus; ++i) {
 		unsigned long phys_cpu;
 		unsigned long boot_addr;
+		int ret;
 
 		phys_cpu = cpu_logical_map(i);
 		boot_addr = virt_to_phys(exynos4_secondary_startup);
 
-		if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr))
+		ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+		if (ret && ret != -ENOSYS)
+			break;
+		if (ret == -ENOSYS) {
+			void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+
+			if (IS_ERR(boot_reg))
+				break;
 			__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+		}
 	}
 }
 
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index e00025bbbe89..87c0d34c7fba 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -16,73 +16,34 @@
 #include <linux/init.h>
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
+#include <linux/cpu_pm.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/smp_scu.h>
+#include <asm/suspend.h>
 
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include <plat/pm-common.h>
 #include <plat/pll.h>
 #include <plat/regs-srom.h>
 
 #include <mach/map.h>
-#include <mach/pm-core.h>
 
 #include "common.h"
 #include "regs-pmu.h"
 
-#define EXYNOS4_EPLL_LOCK			(S5P_VA_CMU + 0x0C010)
-#define EXYNOS4_VPLL_LOCK			(S5P_VA_CMU + 0x0C020)
-
-#define EXYNOS4_EPLL_CON0			(S5P_VA_CMU + 0x0C110)
-#define EXYNOS4_EPLL_CON1			(S5P_VA_CMU + 0x0C114)
-#define EXYNOS4_VPLL_CON0			(S5P_VA_CMU + 0x0C120)
-#define EXYNOS4_VPLL_CON1			(S5P_VA_CMU + 0x0C124)
-
-#define EXYNOS4_CLKSRC_MASK_TOP			(S5P_VA_CMU + 0x0C310)
-#define EXYNOS4_CLKSRC_MASK_CAM			(S5P_VA_CMU + 0x0C320)
-#define EXYNOS4_CLKSRC_MASK_TV			(S5P_VA_CMU + 0x0C324)
-#define EXYNOS4_CLKSRC_MASK_LCD0		(S5P_VA_CMU + 0x0C334)
-#define EXYNOS4_CLKSRC_MASK_MAUDIO		(S5P_VA_CMU + 0x0C33C)
-#define EXYNOS4_CLKSRC_MASK_FSYS		(S5P_VA_CMU + 0x0C340)
-#define EXYNOS4_CLKSRC_MASK_PERIL0		(S5P_VA_CMU + 0x0C350)
-#define EXYNOS4_CLKSRC_MASK_PERIL1		(S5P_VA_CMU + 0x0C354)
-
-#define EXYNOS4_CLKSRC_MASK_DMC			(S5P_VA_CMU + 0x10300)
-
-#define EXYNOS4_EPLLCON0_LOCKED_SHIFT		(29)
-#define EXYNOS4_VPLLCON0_LOCKED_SHIFT		(29)
-
-#define EXYNOS4210_CLKSRC_MASK_LCD1		(S5P_VA_CMU + 0x0C338)
-
-static const struct sleep_save exynos4_set_clksrc[] = {
-	{ .reg = EXYNOS4_CLKSRC_MASK_TOP		, .val = 0x00000001, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_CAM		, .val = 0x11111111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_TV			, .val = 0x00000111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_LCD0		, .val = 0x00001111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_MAUDIO		, .val = 0x00000001, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_FSYS		, .val = 0x01011111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_PERIL0		, .val = 0x01111111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_PERIL1		, .val = 0x01110111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_DMC		, .val = 0x00010000, },
-};
-
-static const struct sleep_save exynos4210_set_clksrc[] = {
-	{ .reg = EXYNOS4210_CLKSRC_MASK_LCD1		, .val = 0x00001111, },
-};
-
-static struct sleep_save exynos4_epll_save[] = {
-	SAVE_ITEM(EXYNOS4_EPLL_CON0),
-	SAVE_ITEM(EXYNOS4_EPLL_CON1),
-};
-
-static struct sleep_save exynos4_vpll_save[] = {
-	SAVE_ITEM(EXYNOS4_VPLL_CON0),
-	SAVE_ITEM(EXYNOS4_VPLL_CON1),
+/**
+ * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping
+ * @hwirq: Hardware IRQ signal of the GIC
+ * @mask: Mask in PMU wake-up mask register
+ */
+struct exynos_wkup_irq {
+	unsigned int hwirq;
+	u32 mask;
 };
 
 static struct sleep_save exynos5_sys_save[] = {
@@ -98,203 +59,254 @@ static struct sleep_save exynos_core_save[] = {
 	SAVE_ITEM(S5P_SROM_BC3),
 };
 
+/*
+ * GIC wake-up support
+ */
 
-/* For Cortex-A9 Diagnostic and Power control register */
-static unsigned int save_arm_register[2];
+static u32 exynos_irqwake_intmask = 0xffffffff;
 
-static int exynos_cpu_suspend(unsigned long arg)
+static const struct exynos_wkup_irq exynos4_wkup_irq[] = {
+	{ 76, BIT(1) }, /* RTC alarm */
+	{ 77, BIT(2) }, /* RTC tick */
+	{ /* sentinel */ },
+};
+
+static const struct exynos_wkup_irq exynos5250_wkup_irq[] = {
+	{ 75, BIT(1) }, /* RTC alarm */
+	{ 76, BIT(2) }, /* RTC tick */
+	{ /* sentinel */ },
+};
+
+static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
 {
-#ifdef CONFIG_CACHE_L2X0
-	outer_flush_all();
-#endif
+	const struct exynos_wkup_irq *wkup_irq;
 
 	if (soc_is_exynos5250())
-		flush_cache_all();
-
-	/* issue the standby signal into the pm unit. */
-	cpu_do_idle();
+		wkup_irq = exynos5250_wkup_irq;
+	else
+		wkup_irq = exynos4_wkup_irq;
+
+	while (wkup_irq->mask) {
+		if (wkup_irq->hwirq == data->hwirq) {
+			if (!state)
+				exynos_irqwake_intmask |= wkup_irq->mask;
+			else
+				exynos_irqwake_intmask &= ~wkup_irq->mask;
+			return 0;
+		}
+		++wkup_irq;
+	}
 
-	pr_info("Failed to suspend the system\n");
-	return 1; /* Aborting suspend */
+	return -ENOENT;
 }
 
-static void exynos_pm_prepare(void)
+/**
+ * exynos_core_power_down : power down the specified cpu
+ * @cpu : the cpu to power down
+ *
+ * Power down the specified cpu. The sequence must be finished by a
+ * call to cpu_do_idle()
+ *
+ */
+void exynos_cpu_power_down(int cpu)
 {
-	unsigned int tmp;
-
-	s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
-	if (!soc_is_exynos5250()) {
-		s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
-		s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
-	} else {
-		s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save));
-		/* Disable USE_RETENTION of JPEG_MEM_OPTION */
-		tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION);
-		tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
-		__raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
-	}
+	__raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+}
 
-	/* Set value of power down register for sleep mode */
+/**
+ * exynos_cpu_power_up : power up the specified cpu
+ * @cpu : the cpu to power up
+ *
+ * Power up the specified cpu
+ */
+void exynos_cpu_power_up(int cpu)
+{
+	__raw_writel(S5P_CORE_LOCAL_PWR_EN,
+		     EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+}
 
-	exynos_sys_powerdown_conf(SYS_SLEEP);
-	__raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
+/**
+ * exynos_cpu_power_state : returns the power state of the cpu
+ * @cpu : the cpu to retrieve the power state from
+ *
+ */
+int exynos_cpu_power_state(int cpu)
+{
+	return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
+			S5P_CORE_LOCAL_PWR_EN);
+}
 
-	/* ensure at least INFORM0 has the resume address */
+/**
+ * exynos_cluster_power_down : power down the specified cluster
+ * @cluster : the cluster to power down
+ */
+void exynos_cluster_power_down(int cluster)
+{
+	__raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
+}
 
-	__raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
+/**
+ * exynos_cluster_power_up : power up the specified cluster
+ * @cluster : the cluster to power up
+ */
+void exynos_cluster_power_up(int cluster)
+{
+	__raw_writel(S5P_CORE_LOCAL_PWR_EN,
+		     EXYNOS_COMMON_CONFIGURATION(cluster));
+}
 
-	/* Before enter central sequence mode, clock src register have to set */
+/**
+ * exynos_cluster_power_state : returns the power state of the cluster
+ * @cluster : the cluster to retrieve the power state from
+ *
+ */
+int exynos_cluster_power_state(int cluster)
+{
+	return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
+			S5P_CORE_LOCAL_PWR_EN);
+}
 
-	if (!soc_is_exynos5250())
-		s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
+#define EXYNOS_BOOT_VECTOR_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+			(sysram_base_addr + 0x24) : S5P_INFORM0))
+#define EXYNOS_BOOT_VECTOR_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+			S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+			(sysram_base_addr + 0x20) : S5P_INFORM1))
 
-	if (soc_is_exynos4210())
-		s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
+#define S5P_CHECK_AFTR  0xFCBA0D10
+#define S5P_CHECK_SLEEP 0x00000BAD
 
+/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
+static void exynos_set_wakeupmask(long mask)
+{
+	__raw_writel(mask, S5P_WAKEUP_MASK);
 }
 
-static int exynos_pm_add(struct device *dev, struct subsys_interface *sif)
+static void exynos_cpu_set_boot_vector(long flags)
 {
-	pm_cpu_prep = exynos_pm_prepare;
-	pm_cpu_sleep = exynos_cpu_suspend;
-
-	return 0;
+	__raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR);
+	__raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG);
 }
 
-static unsigned long pll_base_rate;
-
-static void exynos4_restore_pll(void)
+void exynos_enter_aftr(void)
 {
-	unsigned long pll_con, locktime, lockcnt;
-	unsigned long pll_in_rate;
-	unsigned int p_div, epll_wait = 0, vpll_wait = 0;
-
-	if (pll_base_rate == 0)
-		return;
+	exynos_set_wakeupmask(0x0000ff3e);
+	exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
+	/* Set value of power down register for aftr mode */
+	exynos_sys_powerdown_conf(SYS_AFTR);
+}
 
-	pll_in_rate = pll_base_rate;
+/* For Cortex-A9 Diagnostic and Power control register */
+static unsigned int save_arm_register[2];
 
-	/* EPLL */
-	pll_con = exynos4_epll_save[0].val;
+static void exynos_cpu_save_register(void)
+{
+	unsigned long tmp;
 
-	if (pll_con & (1 << 31)) {
-		pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT);
-		p_div = (pll_con >> PLL46XX_PDIV_SHIFT);
+	/* Save Power control register */
+	asm ("mrc p15, 0, %0, c15, c0, 0"
+	     : "=r" (tmp) : : "cc");
 
-		pll_in_rate /= 1000000;
+	save_arm_register[0] = tmp;
 
-		locktime = (3000 / pll_in_rate) * p_div;
-		lockcnt = locktime * 10000 / (10000 / pll_in_rate);
+	/* Save Diagnostic register */
+	asm ("mrc p15, 0, %0, c15, c0, 1"
+	     : "=r" (tmp) : : "cc");
 
-		__raw_writel(lockcnt, EXYNOS4_EPLL_LOCK);
+	save_arm_register[1] = tmp;
+}
 
-		s3c_pm_do_restore_core(exynos4_epll_save,
-					ARRAY_SIZE(exynos4_epll_save));
-		epll_wait = 1;
-	}
+static void exynos_cpu_restore_register(void)
+{
+	unsigned long tmp;
 
-	pll_in_rate = pll_base_rate;
+	/* Restore Power control register */
+	tmp = save_arm_register[0];
 
-	/* VPLL */
-	pll_con = exynos4_vpll_save[0].val;
+	asm volatile ("mcr p15, 0, %0, c15, c0, 0"
+		      : : "r" (tmp)
+		      : "cc");
 
-	if (pll_con & (1 << 31)) {
-		pll_in_rate /= 1000000;
-		/* 750us */
-		locktime = 750;
-		lockcnt = locktime * 10000 / (10000 / pll_in_rate);
+	/* Restore Diagnostic register */
+	tmp = save_arm_register[1];
 
-		__raw_writel(lockcnt, EXYNOS4_VPLL_LOCK);
+	asm volatile ("mcr p15, 0, %0, c15, c0, 1"
+		      : : "r" (tmp)
+		      : "cc");
+}
 
-		s3c_pm_do_restore_core(exynos4_vpll_save,
-					ARRAY_SIZE(exynos4_vpll_save));
-		vpll_wait = 1;
-	}
+static int exynos_cpu_suspend(unsigned long arg)
+{
+#ifdef CONFIG_CACHE_L2X0
+	outer_flush_all();
+#endif
 
-	/* Wait PLL locking */
+	if (soc_is_exynos5250())
+		flush_cache_all();
 
-	do {
-		if (epll_wait) {
-			pll_con = __raw_readl(EXYNOS4_EPLL_CON0);
-			if (pll_con & (1 << EXYNOS4_EPLLCON0_LOCKED_SHIFT))
-				epll_wait = 0;
-		}
+	/* issue the standby signal into the pm unit. */
+	cpu_do_idle();
 
-		if (vpll_wait) {
-			pll_con = __raw_readl(EXYNOS4_VPLL_CON0);
-			if (pll_con & (1 << EXYNOS4_VPLLCON0_LOCKED_SHIFT))
-				vpll_wait = 0;
-		}
-	} while (epll_wait || vpll_wait);
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
-static struct subsys_interface exynos_pm_interface = {
-	.name		= "exynos_pm",
-	.subsys		= &exynos_subsys,
-	.add_dev	= exynos_pm_add,
-};
-
-static __init int exynos_pm_drvinit(void)
+static void exynos_pm_prepare(void)
 {
-	struct clk *pll_base;
 	unsigned int tmp;
 
-	if (soc_is_exynos5440())
-		return 0;
+	/* Set wake-up mask registers */
+	__raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
+	__raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
 
-	s3c_pm_init();
+	s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
 
-	/* All wakeup disable */
+	if (soc_is_exynos5250()) {
+		s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save));
+		/* Disable USE_RETENTION of JPEG_MEM_OPTION */
+		tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION);
+		tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
+		__raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
+	}
 
-	tmp = __raw_readl(S5P_WAKEUP_MASK);
-	tmp |= ((0xFF << 8) | (0x1F << 1));
-	__raw_writel(tmp, S5P_WAKEUP_MASK);
+	/* Set value of power down register for sleep mode */
 
-	if (!soc_is_exynos5250()) {
-		pll_base = clk_get(NULL, "xtal");
+	exynos_sys_powerdown_conf(SYS_SLEEP);
+	__raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
 
-		if (!IS_ERR(pll_base)) {
-			pll_base_rate = clk_get_rate(pll_base);
-			clk_put(pll_base);
-		}
-	}
+	/* ensure at least INFORM0 has the resume address */
 
-	return subsys_interface_register(&exynos_pm_interface);
+	__raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
 }
-arch_initcall(exynos_pm_drvinit);
 
-static int exynos_pm_suspend(void)
+static void exynos_pm_central_suspend(void)
 {
 	unsigned long tmp;
 
 	/* Setting Central Sequence Register for power down mode */
-
 	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+}
+
+static int exynos_pm_suspend(void)
+{
+	unsigned long tmp;
+
+	exynos_pm_central_suspend();
 
 	/* Setting SEQ_OPTION register */
 
 	tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
 
-	if (!soc_is_exynos5250()) {
-		/* Save Power control register */
-		asm ("mrc p15, 0, %0, c15, c0, 0"
-		     : "=r" (tmp) : : "cc");
-		save_arm_register[0] = tmp;
-
-		/* Save Diagnostic register */
-		asm ("mrc p15, 0, %0, c15, c0, 1"
-		     : "=r" (tmp) : : "cc");
-		save_arm_register[1] = tmp;
-	}
+	if (!soc_is_exynos5250())
+		exynos_cpu_save_register();
 
 	return 0;
 }
 
-static void exynos_pm_resume(void)
+static int exynos_pm_central_resume(void)
 {
 	unsigned long tmp;
 
@@ -311,22 +323,20 @@ static void exynos_pm_resume(void)
 		/* clear the wakeup state register */
 		__raw_writel(0x0, S5P_WAKEUP_STAT);
 		/* No need to perform below restore code */
-		goto early_wakeup;
-	}
-	if (!soc_is_exynos5250()) {
-		/* Restore Power control register */
-		tmp = save_arm_register[0];
-		asm volatile ("mcr p15, 0, %0, c15, c0, 0"
-			      : : "r" (tmp)
-			      : "cc");
-
-		/* Restore Diagnostic register */
-		tmp = save_arm_register[1];
-		asm volatile ("mcr p15, 0, %0, c15, c0, 1"
-			      : : "r" (tmp)
-			      : "cc");
+		return -1;
 	}
 
+	return 0;
+}
+
+static void exynos_pm_resume(void)
+{
+	if (exynos_pm_central_resume())
+		goto early_wakeup;
+
+	if (!soc_is_exynos5250())
+		exynos_cpu_restore_register();
+
 	/* For release retention */
 
 	__raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
@@ -343,13 +353,8 @@ static void exynos_pm_resume(void)
 
 	s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
 
-	if (!soc_is_exynos5250()) {
-		exynos4_restore_pll();
-
-#ifdef CONFIG_SMP
+	if (!soc_is_exynos5250())
 		scu_enable(S5P_VA_SCU);
-#endif
-	}
 
 early_wakeup:
 
@@ -364,12 +369,112 @@ static struct syscore_ops exynos_pm_syscore_ops = {
 	.resume		= exynos_pm_resume,
 };
 
-static __init int exynos_pm_syscore_init(void)
+/*
+ * Suspend Ops
+ */
+
+static int exynos_suspend_enter(suspend_state_t state)
 {
-	if (soc_is_exynos5440())
-		return 0;
+	int ret;
+
+	s3c_pm_debug_init();
+
+	S3C_PMDBG("%s: suspending the system...\n", __func__);
+
+	S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
+			exynos_irqwake_intmask, exynos_get_eint_wake_mask());
+
+	if (exynos_irqwake_intmask == -1U
+	    && exynos_get_eint_wake_mask() == -1U) {
+		pr_err("%s: No wake-up sources!\n", __func__);
+		pr_err("%s: Aborting sleep\n", __func__);
+		return -EINVAL;
+	}
+
+	s3c_pm_save_uarts();
+	exynos_pm_prepare();
+	flush_cache_all();
+	s3c_pm_check_store();
+
+	ret = cpu_suspend(0, exynos_cpu_suspend);
+	if (ret)
+		return ret;
+
+	s3c_pm_restore_uarts();
+
+	S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
+			__raw_readl(S5P_WAKEUP_STAT));
+
+	s3c_pm_check_restore();
+
+	S3C_PMDBG("%s: resuming the system...\n", __func__);
+
+	return 0;
+}
+
+static int exynos_suspend_prepare(void)
+{
+	s3c_pm_check_prepare();
 
-	register_syscore_ops(&exynos_pm_syscore_ops);
 	return 0;
 }
-arch_initcall(exynos_pm_syscore_init);
+
+static void exynos_suspend_finish(void)
+{
+	s3c_pm_check_cleanup();
+}
+
+static const struct platform_suspend_ops exynos_suspend_ops = {
+	.enter		= exynos_suspend_enter,
+	.prepare	= exynos_suspend_prepare,
+	.finish		= exynos_suspend_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+static int exynos_cpu_pm_notifier(struct notifier_block *self,
+				  unsigned long cmd, void *v)
+{
+	int cpu = smp_processor_id();
+
+	switch (cmd) {
+	case CPU_PM_ENTER:
+		if (cpu == 0) {
+			exynos_pm_central_suspend();
+			exynos_cpu_save_register();
+		}
+		break;
+
+	case CPU_PM_EXIT:
+		if (cpu == 0) {
+			if (!soc_is_exynos5250())
+				scu_enable(S5P_VA_SCU);
+			exynos_cpu_restore_register();
+			exynos_pm_central_resume();
+		}
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block exynos_cpu_pm_notifier_block = {
+	.notifier_call = exynos_cpu_pm_notifier,
+};
+
+void __init exynos_pm_init(void)
+{
+	u32 tmp;
+
+	cpu_pm_register_notifier(&exynos_cpu_pm_notifier_block);
+
+	/* Platform-specific GIC callback */
+	gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
+
+	/* All wakeup disable */
+	tmp = __raw_readl(S5P_WAKEUP_MASK);
+	tmp |= ((0xFF << 8) | (0x1F << 1));
+	__raw_writel(tmp, S5P_WAKEUP_MASK);
+
+	register_syscore_ops(&exynos_pm_syscore_ops);
+	suspend_set_ops(&exynos_suspend_ops);
+}
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 8fd24882f0b1..fe6570ebbdde 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -22,8 +22,6 @@
 #include <linux/of_platform.h>
 #include <linux/sched.h>
 
-#include <plat/devs.h>
-
 #include "regs-pmu.h"
 
 /*
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index 05c7ce15322a..fb0deda3b3a4 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -13,8 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/bug.h>
 
-#include <plat/cpu.h>
-
 #include "common.h"
 #include "regs-pmu.h"
 
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index 7c029ce27711..1d13b08708f0 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -26,17 +26,19 @@
 #define S5P_USE_STANDBY_WFI0			(1 << 16)
 #define S5P_USE_STANDBY_WFE0			(1 << 24)
 
-#define S5P_SWRESET				S5P_PMUREG(0x0400)
 #define EXYNOS_SWRESET				S5P_PMUREG(0x0400)
 #define EXYNOS5440_SWRESET			S5P_PMUREG(0x00C4)
 
 #define S5P_WAKEUP_STAT				S5P_PMUREG(0x0600)
+#define S5P_EINT_WAKEUP_MASK			S5P_PMUREG(0x0604)
+#define S5P_WAKEUP_MASK				S5P_PMUREG(0x0608)
 
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM5				S5P_PMUREG(0x0814)
 #define S5P_INFORM6				S5P_PMUREG(0x0818)
 #define S5P_INFORM7				S5P_PMUREG(0x081C)
+#define S5P_PMU_SPARE3				S5P_PMUREG(0x090C)
 
 #define S5P_ARM_CORE0_LOWPWR			S5P_PMUREG(0x1000)
 #define S5P_DIS_IRQ_CORE0			S5P_PMUREG(0x1004)
@@ -104,8 +106,17 @@
 #define S5P_GPS_LOWPWR				S5P_PMUREG(0x139C)
 #define S5P_GPS_ALIVE_LOWPWR			S5P_PMUREG(0x13A0)
 
-#define S5P_ARM_CORE1_CONFIGURATION		S5P_PMUREG(0x2080)
-#define S5P_ARM_CORE1_STATUS			S5P_PMUREG(0x2084)
+#define EXYNOS_ARM_CORE0_CONFIGURATION		S5P_PMUREG(0x2000)
+#define EXYNOS_ARM_CORE_CONFIGURATION(_nr)	\
+			(EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr)))
+#define EXYNOS_ARM_CORE_STATUS(_nr)		\
+			(EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4)
+
+#define EXYNOS_ARM_COMMON_CONFIGURATION		S5P_PMUREG(0x2500)
+#define EXYNOS_COMMON_CONFIGURATION(_nr)	\
+			(EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr)))
+#define EXYNOS_COMMON_STATUS(_nr)		\
+			(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4)
 
 #define S5P_PAD_RET_MAUDIO_OPTION		S5P_PMUREG(0x3028)
 #define S5P_PAD_RET_GPIO_OPTION			S5P_PMUREG(0x3108)
@@ -118,8 +129,6 @@
 #define S5P_CORE_LOCAL_PWR_EN			0x3
 #define S5P_INT_LOCAL_PWR_EN			0x7
 
-#define S5P_CHECK_SLEEP				0x00000BAD
-
 /* Only for EXYNOS4210 */
 #define S5P_CMU_CLKSTOP_LCD1_LOWPWR	S5P_PMUREG(0x1154)
 #define S5P_CMU_RESET_LCD1_LOWPWR	S5P_PMUREG(0x1174)
@@ -312,4 +321,6 @@
 
 #define EXYNOS5_OPTION_USE_RETENTION				(1 << 4)
 
+#define EXYNOS5420_SWRESET_KFC_SEL				0x3
+
 #endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S
new file mode 100644
index 000000000000..108a45f4bb62
--- /dev/null
+++ b/arch/arm/mach-exynos/sleep.S
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Exynos low-level resume code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/linkage.h>
+
+#define CPU_MASK	0xff0ffff0
+#define CPU_CORTEX_A9	0x410fc090
+
+	/*
+	 * The following code is located into the .data section. This is to
+	 * allow l2x0_regs_phys to be accessed with a relative load while we
+	 * can't rely on any MMU translation. We could have put l2x0_regs_phys
+	 * in the .text section as well, but some setups might insist on it to
+	 * be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
+	 */
+	.data
+	.align
+
+	/*
+	 * sleep magic, to allow the bootloader to check for an valid
+	 * image to resume to. Must be the first word before the
+	 * exynos_cpu_resume entry.
+	 */
+
+	.word	0x2bedf00d
+
+	/*
+	 * exynos_cpu_resume
+	 *
+	 * resume code entry for bootloader to call
+	 */
+
+ENTRY(exynos_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+	mrc	p15, 0, r0, c0, c0, 0
+	ldr	r1, =CPU_MASK
+	and	r0, r0, r1
+	ldr	r1, =CPU_CORTEX_A9
+	cmp	r0, r1
+	bleq	l2c310_early_resume
+#endif
+	b	cpu_resume
+ENDPROC(exynos_cpu_resume)
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index fba55fb9f47d..07152d00fc50 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -52,6 +52,7 @@ config ARCH_EBSA285_HOST
 	select FOOTBRIDGE_HOST
 	select ISA
 	select ISA_DMA
+	select ARCH_MAY_HAVE_PC_FDC
 	select PCI
 	help
 	  Say Y here if you intend to run this kernel on the EBSA285 card
@@ -94,6 +95,5 @@ config FOOTBRIDGE_ADDIN
 # EBSA285 board in either host or addin mode
 config ARCH_EBSA285
 	bool
-	select ARCH_MAY_HAVE_PC_FDC
 
 endif
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 0b64dd430d61..c3faa3bc84dd 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -4,11 +4,12 @@
 
 # Object file lists.
 
-obj-y			:= common.o dc21285.o dma.o isa-irq.o
+obj-y			:= common.o dma.o isa-irq.o
 obj-m			:=
 obj-n			:=
 obj-			:=
 
+pci-y			+= dc21285.o
 pci-$(CONFIG_ARCH_CATS) += cats-pci.o
 pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 9669cc0b6318..8f05489671b7 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -76,11 +76,13 @@ __initcall(cats_hw_init);
  * hard reboots fail on early boards.
  */
 static void __init
-fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi)
+fixup_cats(struct tag *tags, char **cmdline)
 {
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
 	screen_info.orig_video_lines  = 25;
 	screen_info.orig_video_points = 16;
 	screen_info.orig_y = 24;
+#endif
 }
 
 MACHINE_START(CATS, "Chalice-CATS")
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index 3971104d32d4..bf7aa7d298e7 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -105,7 +105,7 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
 static struct irqaction footbridge_timer_irq = {
 	.name		= "dc21285_timer1",
 	.handler	= timer1_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.dev_id		= &ckevt_dc21285,
 };
 
@@ -125,7 +125,7 @@ void __init footbridge_timer_init(void)
 	clockevents_config_and_register(ce, rate, 0x4, 0xffffff);
 }
 
-static u32 notrace footbridge_read_sched_clock(void)
+static u64 notrace footbridge_read_sched_clock(void)
 {
 	return ~*CSR_TIMER3_VALUE;
 }
@@ -138,5 +138,5 @@ void __init footbridge_sched_clock(void)
 	*CSR_TIMER3_CLR = 0;
 	*CSR_TIMER3_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16;
 
-	setup_sched_clock(footbridge_read_sched_clock, 24, rate);
+	sched_clock_register(footbridge_read_sched_clock, 24, rate);
 }
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index 7c2fdae9a38b..96a3d73ef4bf 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -334,15 +334,15 @@ void __init dc21285_preinit(void)
 	/*
 	 * We don't care if these fail.
 	 */
-	dc21285_request_irq(IRQ_PCI_SERR, dc21285_serr_irq, IRQF_DISABLED,
+	dc21285_request_irq(IRQ_PCI_SERR, dc21285_serr_irq, 0,
 			    "PCI system error", &serr_timer);
-	dc21285_request_irq(IRQ_PCI_PERR, dc21285_parity_irq, IRQF_DISABLED,
+	dc21285_request_irq(IRQ_PCI_PERR, dc21285_parity_irq, 0,
 			    "PCI parity error", &perr_timer);
-	dc21285_request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, IRQF_DISABLED,
+	dc21285_request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, 0,
 			    "PCI abort", NULL);
-	dc21285_request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, IRQF_DISABLED,
+	dc21285_request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, 0,
 			    "Discard timer", NULL);
-	dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, IRQF_DISABLED,
+	dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, 0,
 			    "PCI data parity", NULL);
 
 	if (cfn_mode) {
diff --git a/arch/arm/mach-footbridge/include/mach/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h
deleted file mode 100644
index d0fea9d6d4ab..000000000000
--- a/arch/arm/mach-footbridge/include/mach/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  arch/arm/mach-footbridge/include/mach/timex.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA285 architecture timex specifications
- */
-
-/*
- * We assume a constant here; this satisfies the maths in linux/timex.h
- * and linux/time.h.  CLOCK_TICK_RATE is actually system dependent, but
- * this must be a constant.
- */
-#define CLOCK_TICK_RATE		(50000000/16)
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index d9301dd56354..b73f52e196b9 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -27,7 +27,7 @@ static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
 static struct irqaction pit_timer_irq = {
 	.name		= "pit",
 	.handler	= pit_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.dev_id		= &i8253_clockevent,
 };
 
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index eb1fa5c84723..cdee08c6d239 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -620,7 +620,7 @@ __initcall(nw_hw_init);
  * the parameter page.
  */
 static void __init
-fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi)
+fixup_netwinder(struct tag *tags, char **cmdline)
 {
 #ifdef CONFIG_ISAPNP
 	extern int isapnp_disable;
diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c
index 87dff4f5059e..ddf8ec9d203b 100644
--- a/arch/arm/mach-gemini/idle.c
+++ b/arch/arm/mach-gemini/idle.c
@@ -3,7 +3,7 @@
  */
 
 #include <linux/init.h>
-#include <asm/system.h>
+#include <asm/system_misc.h>
 #include <asm/proc-fns.h>
 
 static void gemini_idle(void)
diff --git a/arch/arm/mach-gemini/include/mach/timex.h b/arch/arm/mach-gemini/include/mach/timex.h
deleted file mode 100644
index dc5690ba975c..000000000000
--- a/arch/arm/mach-gemini/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Gemini timex specifications
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/* When AHB bus frequency is 150MHz */
-#define CLOCK_TICK_RATE	38000000
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 0aded64a9ebc..830b76e70250 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -5,7 +5,6 @@ config ARCH_HIGHBANK
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_HAS_OPP
 	select ARCH_SUPPORTS_BIG_ENDIAN
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
@@ -14,14 +13,8 @@ config ARCH_HIGHBANK
 	select ARM_PSCI
 	select ARM_TIMER_SP804
 	select CACHE_L2X0
-	select COMMON_CLK
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
 	select MAILBOX
 	select PL320_MBOX
-	select SPARSE_IRQ
-	select USE_OF
 	select ZONE_DMA if ARM_LPAE
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index c7de89b263dd..8c35ae4ff176 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -51,11 +51,13 @@ static void __init highbank_scu_map_io(void)
 }
 
 
-static void highbank_l2x0_disable(void)
+static void highbank_l2c310_write_sec(unsigned long val, unsigned reg)
 {
-	outer_flush_all();
-	/* Disable PL310 L2 Cache controller */
-	highbank_smc1(0x102, 0x0);
+	if (reg == L2X0_CTRL)
+		highbank_smc1(0x102, val);
+	else
+		WARN_ONCE(1, "Highbank L2C310: ignoring write to reg 0x%x\n",
+			  reg);
 }
 
 static void __init highbank_init_irq(void)
@@ -64,14 +66,6 @@ static void __init highbank_init_irq(void)
 
 	if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
 		highbank_scu_map_io();
-
-	/* Enable PL310 L2 Cache controller */
-	if (IS_ENABLED(CONFIG_CACHE_L2X0) &&
-	    of_find_compatible_node(NULL, NULL, "arm,pl310-cache")) {
-		highbank_smc1(0x102, 0x1);
-		l2x0_of_init(0, ~0UL);
-		outer_cache.disable = highbank_l2x0_disable;
-	}
 }
 
 static void highbank_power_off(void)
@@ -185,6 +179,9 @@ DT_MACHINE_START(HIGHBANK, "Highbank")
 #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
 	.dma_zone_size	= (4ULL * SZ_1G),
 #endif
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.l2c_write_sec	= highbank_l2c310_write_sec,
 	.init_irq	= highbank_init_irq,
 	.init_machine	= highbank_init,
 	.dt_compat	= highbank_match,
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 1abae5f6a418..feee4dbb0760 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -3,13 +3,9 @@ config ARCH_HI3xxx
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select CACHE_L2X0
-	select CLKSRC_OF
-	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU
+	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
 	select PINCTRL
 	select PINCTRL_SINGLE
 	help
diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile
index 6870058d0a48..2ae1b59267c2 100644
--- a/arch/arm/mach-hisi/Makefile
+++ b/arch/arm/mach-hisi/Makefile
@@ -3,5 +3,4 @@
 #
 
 obj-y	+= hisilicon.o
-obj-$(CONFIG_SMP)		+= platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+obj-$(CONFIG_SMP)		+= platsmp.o hotplug.o
diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c
index b909854eee7f..abd441b0c604 100644
--- a/arch/arm/mach-hisi/hotplug.c
+++ b/arch/arm/mach-hisi/hotplug.c
@@ -178,6 +178,7 @@ static inline void cpu_enter_lowpower(void)
 	  : "cc");
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
 void hi3xxx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
@@ -198,3 +199,4 @@ int hi3xxx_cpu_kill(unsigned int cpu)
 	hi3xxx_set_cpu(cpu, false);
 	return 1;
 }
+#endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 33567aa5880f..8d42eab76d53 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,19 +1,15 @@
 config ARCH_MXC
 	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
-	select ARM_PATCH_PHYS_VIRT
 	select CLKSRC_MMIO
-	select COMMON_CLK
-	select GENERIC_ALLOCATOR
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
-	select MULTI_IRQ_HANDLER
 	select PINCTRL
+	select PM_OPP if PM
 	select SOC_BUS
-	select SPARSE_IRQ
-	select USE_OF
+	select SRAM
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -121,18 +117,16 @@ config SOC_IMX31
 config SOC_IMX35
 	bool
 	select ARCH_MXC_IOMUX_V3
-	select CPU_V6K
 	select HAVE_EPIT
 	select MXC_AVIC
+	select PINCTRL_IMX35
 	select SMP_ON_UP if SMP
-	select PINCTRL
 
 config SOC_IMX5
 	bool
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select ARCH_MXC_IOMUX_V3
-	select CPU_V7
 	select MXC_TZIC
 
 config	SOC_IMX51
@@ -708,61 +702,6 @@ endif
 
 if ARCH_MULTI_V7
 
-comment "i.MX51 machines:"
-
-config MACH_IMX51_DT
-	bool "Support i.MX51 platforms from device tree"
-	select SOC_IMX51
-	help
-	  Include support for Freescale i.MX51 based platforms
-	  using the device tree for discovery
-
-config MACH_MX51_BABBAGE
-	bool "Support MX51 BABBAGE platforms"
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select SOC_IMX51
-	help
-	  Include support for MX51 Babbage platform, also known as MX51EVK in
-	  u-boot. This includes specific configurations for the board and its
-	  peripherals.
-
-config MACH_EUKREA_CPUIMX51SD
-	bool "Support Eukrea CPUIMX51SD module"
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select SOC_IMX51
-	help
-	  Include support for Eukrea CPUIMX51SD platform. This includes
-	  specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX51SD
-	default MACH_EUKREA_MBIMXSD51_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD51_BASEBOARD
-	prompt "Eukrea MBIMXSD development board"
-	bool
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
 comment "Device tree only"
 
 config	SOC_IMX50
@@ -774,68 +713,66 @@ config	SOC_IMX50
 	help
 	  This enables support for Freescale i.MX50 processor.
 
+config MACH_IMX51_DT
+	bool "i.MX51 support"
+	select SOC_IMX51
+	help
+	  This enables support for Freescale i.MX51 processor
+
 config	SOC_IMX53
 	bool "i.MX53 support"
 	select HAVE_IMX_SRC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select PINCTRL_IMX53
 	select SOC_IMX5
 
 	help
 	  This enables support for Freescale i.MX53 processor.
 
-config SOC_IMX6Q
-	bool "i.MX6 Quad/DualLite support"
-	select ARCH_HAS_CPUFREQ
-	select ARCH_HAS_OPP
+config SOC_IMX6
+	bool
 	select ARM_ERRATA_754322
-	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
 	select ARM_GIC
-	select CPU_V7
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
-	select HAVE_SMP
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
-	select PINCTRL_IMX6Q
 	select PL310_ERRATA_588369 if CACHE_PL310
 	select PL310_ERRATA_727915 if CACHE_PL310
 	select PL310_ERRATA_769419 if CACHE_PL310
-	select PM_OPP if PM
+
+config SOC_IMX6Q
+	bool "i.MX6 Quad/DualLite support"
+	select ARM_ERRATA_764369 if SMP
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select PCI_DOMAINS if PCI
+	select PINCTRL_IMX6Q
+	select SOC_IMX6
 
 	help
 	  This enables support for Freescale i.MX6 Quad processor.
 
 config SOC_IMX6SL
 	bool "i.MX6 SoloLite support"
-	select ARM_ERRATA_754322
-	select ARM_ERRATA_775420
-	select ARM_GIC
-	select CPU_V7
-	select HAVE_IMX_ANATOP
-	select HAVE_IMX_GPC
-	select HAVE_IMX_MMDC
-	select HAVE_IMX_SRC
-	select MFD_SYSCON
 	select PINCTRL_IMX6SL
-	select PL310_ERRATA_588369 if CACHE_PL310
-	select PL310_ERRATA_727915 if CACHE_PL310
-	select PL310_ERRATA_769419 if CACHE_PL310
+	select SOC_IMX6
 
 	help
 	  This enables support for Freescale i.MX6 SoloLite processor.
 
+config SOC_IMX6SX
+	bool "i.MX6 SoloX support"
+	select PINCTRL_IMX6SX
+	select SOC_IMX6
+
+	help
+	  This enables support for Freescale i.MX6 SoloX processor.
+
 config SOC_VF610
 	bool "Vybrid Family VF610 support"
-	select CPU_V7
 	select ARM_GIC
-	select CLKSRC_OF
 	select PINCTRL_VF610
 	select VF_PIT_TIMER
 	select PL310_ERRATA_588369 if CACHE_PL310
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index ec419649320f..bbe93bbfd003 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
+obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
 endif
 
 ifdef CONFIG_SND_IMX_SOC
@@ -100,15 +101,13 @@ obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
+obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o
 
-obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
-# i.MX6SL reuses i.MX6Q code
-obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
-
-# i.MX5 based machines
-obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
+ifeq ($(CONFIG_SUSPEND),y)
+AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
+endif
+obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
 
 obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
 obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
index 8d1df2e4b7ac..24b103c67f82 100644
--- a/arch/arm/mach-imx/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -135,7 +135,7 @@ static __init void avic_init_gc(int idx, unsigned int irq_start)
 	irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
 }
 
-asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
+static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
 {
 	u32 nivector;
 
@@ -190,6 +190,8 @@ void __init mxc_init_irq(void __iomem *irqbase)
 	for (i = 0; i < 8; i++)
 		__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
 
+	set_handle_irq(avic_handle_irq);
+
 #ifdef CONFIG_FIQ
 	/* Initialize FIQ */
 	init_FIQ(FIQ_START);
diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c
index a2ecc006b322..4ba587da89d2 100644
--- a/arch/arm/mach-imx/clk-gate2.c
+++ b/arch/arm/mach-imx/clk-gate2.c
@@ -27,48 +27,61 @@
  * parent - fixed parent.  No clk_set_parent support
  */
 
-#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+struct clk_gate2 {
+	struct clk_hw hw;
+	void __iomem	*reg;
+	u8		bit_idx;
+	u8		flags;
+	spinlock_t	*lock;
+	unsigned int	*share_count;
+};
+
+#define to_clk_gate2(_hw) container_of(_hw, struct clk_gate2, hw)
 
 static int clk_gate2_enable(struct clk_hw *hw)
 {
-	struct clk_gate *gate = to_clk_gate(hw);
+	struct clk_gate2 *gate = to_clk_gate2(hw);
 	u32 reg;
 	unsigned long flags = 0;
 
-	if (gate->lock)
-		spin_lock_irqsave(gate->lock, flags);
+	spin_lock_irqsave(gate->lock, flags);
+
+	if (gate->share_count && (*gate->share_count)++ > 0)
+		goto out;
 
 	reg = readl(gate->reg);
 	reg |= 3 << gate->bit_idx;
 	writel(reg, gate->reg);
 
-	if (gate->lock)
-		spin_unlock_irqrestore(gate->lock, flags);
+out:
+	spin_unlock_irqrestore(gate->lock, flags);
 
 	return 0;
 }
 
 static void clk_gate2_disable(struct clk_hw *hw)
 {
-	struct clk_gate *gate = to_clk_gate(hw);
+	struct clk_gate2 *gate = to_clk_gate2(hw);
 	u32 reg;
 	unsigned long flags = 0;
 
-	if (gate->lock)
-		spin_lock_irqsave(gate->lock, flags);
+	spin_lock_irqsave(gate->lock, flags);
+
+	if (gate->share_count && --(*gate->share_count) > 0)
+		goto out;
 
 	reg = readl(gate->reg);
 	reg &= ~(3 << gate->bit_idx);
 	writel(reg, gate->reg);
 
-	if (gate->lock)
-		spin_unlock_irqrestore(gate->lock, flags);
+out:
+	spin_unlock_irqrestore(gate->lock, flags);
 }
 
 static int clk_gate2_is_enabled(struct clk_hw *hw)
 {
 	u32 reg;
-	struct clk_gate *gate = to_clk_gate(hw);
+	struct clk_gate2 *gate = to_clk_gate2(hw);
 
 	reg = readl(gate->reg);
 
@@ -87,21 +100,23 @@ static struct clk_ops clk_gate2_ops = {
 struct clk *clk_register_gate2(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 bit_idx,
-		u8 clk_gate2_flags, spinlock_t *lock)
+		u8 clk_gate2_flags, spinlock_t *lock,
+		unsigned int *share_count)
 {
-	struct clk_gate *gate;
+	struct clk_gate2 *gate;
 	struct clk *clk;
 	struct clk_init_data init;
 
-	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+	gate = kzalloc(sizeof(struct clk_gate2), GFP_KERNEL);
 	if (!gate)
 		return ERR_PTR(-ENOMEM);
 
-	/* struct clk_gate assignments */
+	/* struct clk_gate2 assignments */
 	gate->reg = reg;
 	gate->bit_idx = bit_idx;
 	gate->flags = clk_gate2_flags;
 	gate->lock = lock;
+	gate->share_count = share_count;
 
 	init.name = name;
 	init.ops = &clk_gate2_ops;
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index 15f9d223cf0b..7f739be3de2c 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -40,12 +40,14 @@
 #define SCM_GCCR	IO_ADDR_SCM(0xc)
 
 static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
-static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", "prem",
-				"fclk", };
+static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m",
+				       "prem", "fclk", };
+
 enum imx1_clks {
-	dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, spll, mcu,
-	fclk, hclk, clk48m, per1, per2, per3, clko, dma_gate, csi_gate,
-	mma_gate, usbd_gate, clk_max
+	dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, mpll_gate,
+	spll, spll_gate, mcu, fclk, hclk, clk48m, per1, per2, per3, clko,
+	uart3_gate, ssi2_gate, brom_gate, dma_gate, csi_gate, mma_gate,
+	usbd_gate, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -62,17 +64,22 @@ int __init mx1_clocks_init(unsigned long fref)
 	clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks,
 			ARRAY_SIZE(prem_sel_clks));
 	clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
+	clk[mpll_gate] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
 	clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
+	clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
 	clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
-	clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 15, 1);
-	clk[hclk] = imx_clk_divider("hclk", "spll", CCM_CSCR, 10, 4);
-	clk[clk48m] = imx_clk_divider("clk48m", "spll", CCM_CSCR, 26, 3);
-	clk[per1] = imx_clk_divider("per1", "spll", CCM_PCDR, 0, 4);
-	clk[per2] = imx_clk_divider("per2", "spll", CCM_PCDR, 4, 4);
-	clk[per3] = imx_clk_divider("per3", "spll", CCM_PCDR, 16, 7);
+	clk[fclk] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
+	clk[hclk] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
+	clk[clk48m] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
+	clk[per1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
+	clk[per2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
+	clk[per3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
 	clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks,
 			ARRAY_SIZE(clko_sel_clks));
-	clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 4);
+	clk[uart3_gate] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
+	clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
+	clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
+	clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
 	clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
 	clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
 	clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
@@ -84,9 +91,6 @@ int __init mx1_clocks_init(unsigned long fref)
 
 	clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma");
 	clk_register_clkdev(clk[hclk], "ipg", "imx1-dma");
-	clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0");
-	clk_register_clkdev(clk[mma_gate], "mma", NULL);
-	clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0");
 	clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
 	clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[per1], "per", "imx1-uart.0");
@@ -94,20 +98,15 @@ int __init mx1_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[per1], "per", "imx1-uart.1");
 	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
 	clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
-	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2");
+	clk_register_clkdev(clk[uart3_gate], "ipg", "imx1-uart.2");
 	clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0");
 	clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
 	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
 	clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
 	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
-	clk_register_clkdev(clk[per2], NULL, "imx-mmc.0");
 	clk_register_clkdev(clk[per2], "per", "imx1-fb.0");
 	clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0");
 	clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0");
-	clk_register_clkdev(clk[hclk], "mshc", NULL);
-	clk_register_clkdev(clk[per3], "ssi", NULL);
-	clk_register_clkdev(clk[clk32], NULL, "imx1-rtc.0");
-	clk_register_clkdev(clk[clko], "clko", NULL);
 
 	mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
 
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index d7ed66091a2a..bdc2e4630a08 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -149,7 +149,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_register_clkdev(clk[per1], "per", "imx-gpt.1");
 	clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
 	clk_register_clkdev(clk[per1], "per", "imx-gpt.2");
-	clk_register_clkdev(clk[pwm_ipg_gate], "pwm", "mxc_pwm.0");
 	clk_register_clkdev(clk[per2], "per", "imx21-cspi.0");
 	clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0");
 	clk_register_clkdev(clk[per2], "per", "imx21-cspi.1");
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index 69858c78f40d..ae578c096ad8 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -62,6 +62,10 @@ static struct clk_onecell_data clk_data;
 
 static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", };
 static const char *per_sel_clks[] = { "ahb", "upll", };
+static const char *cko_sel_clks[] = { "dummy", "osc", "cpu", "ahb",
+				      "ipg", "dummy", "dummy", "dummy",
+				      "dummy", "dummy", "per0", "per2",
+				      "per13", "per14", "usbotg_ahb", "dummy",};
 
 enum mx25_clks {
 	dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg,
@@ -82,7 +86,7 @@ enum mx25_clks {
 	pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg,
 	sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg,
 	uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17,
-	wdt_ipg, clk_max
+	wdt_ipg, cko_div, cko_sel, cko, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -117,6 +121,9 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)
 	clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
 	clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
 	clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[cko_div] = imx_clk_divider("cko_div", "cko_sel", ccm(CCM_MCR), 24, 6);
+	clk[cko_sel] = imx_clk_mux("cko_sel", ccm(CCM_MCR), 20, 4, cko_sel_clks, ARRAY_SIZE(cko_sel_clks));
+	clk[cko] = imx_clk_gate("cko", "cko_div", ccm(CCM_MCR),  30);
 	clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6);
 	clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6);
 	clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6);
@@ -230,6 +237,12 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)
 	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
 
+	/*
+	 * Let's initially set up CLKO parent as ipg, since this configuration
+	 * is used on some imx25 board designs to clock the audio codec.
+	 */
+	clk_set_parent(clk[cko_sel], clk[ipg]);
+
 	return 0;
 }
 
@@ -265,14 +278,6 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
 	clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
 	clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2");
-	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.0");
-	clk_register_clkdev(clk[per10], "per", "mxc_pwm.0");
-	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.1");
-	clk_register_clkdev(clk[per10], "per", "mxc_pwm.1");
-	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.2");
-	clk_register_clkdev(clk[per10], "per", "mxc_pwm.2");
-	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.3");
-	clk_register_clkdev(clk[per10], "per", "mxc_pwm.3");
 	clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
 	clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
 	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0");
@@ -312,8 +317,6 @@ int __init mx25_clocks_init(void)
 int __init mx25_clocks_init_dt(void)
 {
 	struct device_node *np;
-	void __iomem *base;
-	int irq;
 	unsigned long osc_rate = 24000000;
 
 	/* retrieve the freqency of fixed clocks from device tree */
@@ -333,12 +336,7 @@ int __init mx25_clocks_init_dt(void)
 
 	__mx25_clocks_init(osc_rate);
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt");
-	base = of_iomap(np, 0);
-	WARN_ON(!base);
-	irq = irq_of_parse_and_map(np, 0);
-
-	mxc_timer_init(base, irq);
+	mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt"));
 
 	return 0;
 }
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index c6b40f386786..317a662626d6 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -82,7 +82,8 @@ enum mx27_clks {
 	csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate,
 	uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate,
 	uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel,
-	mpll_sel, spll_gate, clk_max
+	mpll_sel, spll_gate, mshc_div, rtic_ipg_gate, mshc_ipg_gate,
+	rtic_ahb_gate, mshc_baud_gate, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -117,6 +118,7 @@ int __init mx27_clocks_init(unsigned long fref)
 		clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
 	}
 
+	clk[mshc_div] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6);
 	clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
 	clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
 	clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
@@ -145,9 +147,11 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
 	clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
 	clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
+	clk[rtic_ipg_gate] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8);
 	clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
 	clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
 	clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
+	clk[mshc_ipg_gate] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13);
 	clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
 	clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
 	clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
@@ -166,6 +170,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
 	clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
 	clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
+	clk[mshc_baud_gate] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2);
 	clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1,  3);
 	clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1,  4);
 	clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1,  5);
@@ -177,6 +182,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
 	clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
 	clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
+	clk[rtic_ahb_gate] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14);
 	clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
 	clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
 	clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
@@ -221,17 +227,6 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5");
 	clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
-	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.1");
-	clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
-	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.2");
-	clk_register_clkdev(clk[gpt4_ipg_gate], "ipg", "imx-gpt.3");
-	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.3");
-	clk_register_clkdev(clk[gpt5_ipg_gate], "ipg", "imx-gpt.4");
-	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4");
-	clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5");
-	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5");
-	clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0");
 	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0");
 	clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0");
 	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1");
@@ -279,14 +274,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0");
 	clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
 	clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
-	clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
-	clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
-	clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
-	clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
-	clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc");
-	clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
 	clk_register_clkdev(clk[cpu_div], NULL, "cpu0");
-	clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
 
 	mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
 
@@ -297,7 +285,6 @@ int __init mx27_clocks_init(unsigned long fref)
 	return 0;
 }
 
-#ifdef CONFIG_OF
 int __init mx27_clocks_init_dt(void)
 {
 	struct device_node *np;
@@ -313,4 +300,3 @@ int __init mx27_clocks_init_dt(void)
 
 	return mx27_clocks_init(fref);
 }
-#endif
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index b5b65f3efaf1..4a9de0835eb1 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -191,7 +191,6 @@ int __init mx31_clocks_init(unsigned long fref)
 	return 0;
 }
 
-#ifdef CONFIG_OF
 int __init mx31_clocks_init_dt(void)
 {
 	struct device_node *np;
@@ -207,4 +206,3 @@ int __init mx31_clocks_init_dt(void)
 
 	return mx31_clocks_init(fref);
 }
-#endif
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index a4d5e425cd82..71c86a2f856d 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -289,14 +289,12 @@ int __init mx35_clocks_init(void)
 	return 0;
 }
 
-static int __init mx35_clocks_init_dt(struct device_node *ccm_node)
+static void __init mx35_clocks_init_dt(struct device_node *ccm_node)
 {
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
 	of_clk_add_provider(ccm_node, of_clk_src_onecell_get, &clk_data);
 
 	mx35_clocks_init();
-
-	return 0;
 }
 CLK_OF_DECLARE(imx35, "fsl,imx35-ccm", mx35_clocks_init_dt);
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 19fca1fdc6fe..21d2b111c83d 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -266,8 +266,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[IMX5_CLK_ECSPI2_PER_GATE], "per", "imx51-ecspi.1");
 	clk_register_clkdev(clk[IMX5_CLK_ECSPI2_IPG_GATE], "ipg", "imx51-ecspi.1");
 	clk_register_clkdev(clk[IMX5_CLK_CSPI_IPG_GATE], NULL, "imx35-cspi.2");
-	clk_register_clkdev(clk[IMX5_CLK_PWM1_IPG_GATE], "pwm", "mxc_pwm.0");
-	clk_register_clkdev(clk[IMX5_CLK_PWM2_IPG_GATE], "pwm", "mxc_pwm.1");
 	clk_register_clkdev(clk[IMX5_CLK_I2C1_GATE], NULL, "imx21-i2c.0");
 	clk_register_clkdev(clk[IMX5_CLK_I2C2_GATE], NULL, "imx21-i2c.1");
 	clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.0");
@@ -324,9 +322,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 
 static void __init mx50_clocks_init(struct device_node *np)
 {
-	void __iomem *base;
 	unsigned long r;
-	int i, irq;
+	int i;
 
 	clk[IMX5_CLK_PLL1_SW]		= imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
 	clk[IMX5_CLK_PLL2_SW]		= imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
@@ -374,11 +371,7 @@ static void __init mx50_clocks_init(struct device_node *np)
 	r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
 	clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt");
-	base = of_iomap(np, 0);
-	WARN_ON(!base);
-	irq = irq_of_parse_and_map(np, 0);
-	mxc_timer_init(base, irq);
+	mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt"));
 }
 CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init);
 
@@ -438,7 +431,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 
 	clk_register_clkdev(clk[IMX5_CLK_HSI2C_GATE], NULL, "imx21-i2c.2");
 	clk_register_clkdev(clk[IMX5_CLK_MX51_MIPI], "mipi_hsp", NULL);
-	clk_register_clkdev(clk[IMX5_CLK_VPU_GATE], NULL, "imx51-vpu.0");
 	clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx27-fec.0");
 	clk_register_clkdev(clk[IMX5_CLK_USB_PHY_GATE], "phy", "mxc-ehci.0");
 	clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx51.0");
@@ -494,9 +486,8 @@ CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt);
 
 static void __init mx53_clocks_init(struct device_node *np)
 {
-	int i, irq;
+	int i;
 	unsigned long r;
-	void __iomem *base;
 
 	clk[IMX5_CLK_PLL1_SW]		= imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
 	clk[IMX5_CLK_PLL2_SW]		= imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
@@ -563,7 +554,6 @@ static void __init mx53_clocks_init(struct device_node *np)
 
 	mx5_clocks_common_init(0, 0, 0, 0);
 
-	clk_register_clkdev(clk[IMX5_CLK_VPU_GATE], NULL, "imx53-vpu.0");
 	clk_register_clkdev(clk[IMX5_CLK_I2C3_GATE], NULL, "imx21-i2c.2");
 	clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx25-fec.0");
 	clk_register_clkdev(clk[IMX5_CLK_USB_PHY1_GATE], "usb_phy1", "mxc-ehci.0");
@@ -594,10 +584,6 @@ static void __init mx53_clocks_init(struct device_node *np)
 	r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
 	clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt");
-	base = of_iomap(np, 0);
-	WARN_ON(!base);
-	irq = irq_of_parse_and_map(np, 0);
-	mxc_timer_init(base, irq);
+	mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt"));
 }
 CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 4d677f442539..8e795dea02ec 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -107,7 +107,7 @@ enum mx6q_clks {
 	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
 	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
 	spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
-	lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max
+	lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, esai_ahb, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -140,11 +140,13 @@ static struct clk_div_table video_div_table[] = {
 	{ /* sentinel */ }
 };
 
+static unsigned int share_count_esai;
+
 static void __init imx6q_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
 	void __iomem *base;
-	int i, irq;
+	int i;
 	int ret;
 
 	clk[dummy] = imx_clk_fixed("dummy", 0);
@@ -208,8 +210,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	 * the "output_enable" bit as a gate, even though it's really just
 	 * enabling clock output.
 	 */
-	clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10);
-	clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11);
+	clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
+	clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
 
 	/*                                name              parent_name        reg       idx */
 	clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
@@ -258,14 +260,14 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[ipu2_sel]         = imx_clk_mux("ipu2_sel",         base + 0x3c, 14, 2, ipu_sels,          ARRAY_SIZE(ipu_sels));
 	clk[ldb_di0_sel]      = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9,  3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
 	clk[ldb_di1_sel]      = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
-	clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
-	clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
-	clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
-	clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
-	clk[ipu1_di0_sel]     = imx_clk_mux("ipu1_di0_sel",     base + 0x34, 0,  3, ipu1_di0_sels,     ARRAY_SIZE(ipu1_di0_sels));
-	clk[ipu1_di1_sel]     = imx_clk_mux("ipu1_di1_sel",     base + 0x34, 9,  3, ipu1_di1_sels,     ARRAY_SIZE(ipu1_di1_sels));
-	clk[ipu2_di0_sel]     = imx_clk_mux("ipu2_di0_sel",     base + 0x38, 0,  3, ipu2_di0_sels,     ARRAY_SIZE(ipu2_di0_sels));
-	clk[ipu2_di1_sel]     = imx_clk_mux("ipu2_di1_sel",     base + 0x38, 9,  3, ipu2_di1_sels,     ARRAY_SIZE(ipu2_di1_sels));
+	clk[ipu1_di0_pre_sel] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[ipu1_di1_pre_sel] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[ipu2_di0_pre_sel] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[ipu2_di1_pre_sel] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[ipu1_di0_sel]     = imx_clk_mux_flags("ipu1_di0_sel",     base + 0x34, 0,  3, ipu1_di0_sels,     ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
+	clk[ipu1_di1_sel]     = imx_clk_mux_flags("ipu1_di1_sel",     base + 0x34, 9,  3, ipu1_di1_sels,     ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
+	clk[ipu2_di0_sel]     = imx_clk_mux_flags("ipu2_di0_sel",     base + 0x38, 0,  3, ipu2_di0_sels,     ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
+	clk[ipu2_di1_sel]     = imx_clk_mux_flags("ipu2_di1_sel",     base + 0x38, 9,  3, ipu2_di1_sels,     ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
 	clk[hsi_tx_sel]       = imx_clk_mux("hsi_tx_sel",       base + 0x30, 28, 1, hsi_tx_sels,       ARRAY_SIZE(hsi_tx_sels));
 	clk[pcie_axi_sel]     = imx_clk_mux("pcie_axi_sel",     base + 0x18, 10, 1, pcie_axi_sels,     ARRAY_SIZE(pcie_axi_sels));
 	clk[ssi1_sel]         = imx_clk_fixup_mux("ssi1_sel",   base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
@@ -352,9 +354,14 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[ecspi2]       = imx_clk_gate2("ecspi2",        "ecspi_root",        base + 0x6c, 2);
 	clk[ecspi3]       = imx_clk_gate2("ecspi3",        "ecspi_root",        base + 0x6c, 4);
 	clk[ecspi4]       = imx_clk_gate2("ecspi4",        "ecspi_root",        base + 0x6c, 6);
-	clk[ecspi5]       = imx_clk_gate2("ecspi5",        "ecspi_root",        base + 0x6c, 8);
+	if (cpu_is_imx6dl())
+		/* ecspi5 is replaced with i2c4 on imx6dl & imx6s */
+		clk[ecspi5] = imx_clk_gate2("i2c4",        "ipg_per",           base + 0x6c, 8);
+	else
+		clk[ecspi5] = imx_clk_gate2("ecspi5",      "ecspi_root",        base + 0x6c, 8);
 	clk[enet]         = imx_clk_gate2("enet",          "ipg",               base + 0x6c, 10);
-	clk[esai]         = imx_clk_gate2("esai",          "esai_podf",         base + 0x6c, 16);
+	clk[esai]         = imx_clk_gate2_shared("esai",   "esai_podf",         base + 0x6c, 16, &share_count_esai);
+	clk[esai_ahb]     = imx_clk_gate2_shared("esai_ahb", "ahb",             base + 0x6c, 16, &share_count_esai);
 	clk[gpt_ipg]      = imx_clk_gate2("gpt_ipg",       "ipg",               base + 0x6c, 20);
 	clk[gpt_ipg_per]  = imx_clk_gate2("gpt_ipg_per",   "ipg_per",           base + 0x6c, 22);
 	if (cpu_is_imx6dl())
@@ -437,12 +444,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 
 	clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
-	clk_register_clkdev(clk[ahb], "ahb", NULL);
-	clk_register_clkdev(clk[cko1], "cko1", NULL);
-	clk_register_clkdev(clk[arm], NULL, "cpu0");
-	clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL);
-	clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL);
+	clk_register_clkdev(clk[enet_ref], "enet_ref", NULL);
 
 	if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
 	    cpu_is_imx6dl()) {
@@ -450,6 +452,15 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
 	}
 
+	clk_set_parent(clk[ipu1_di0_pre_sel], clk[pll5_video_div]);
+	clk_set_parent(clk[ipu1_di1_pre_sel], clk[pll5_video_div]);
+	clk_set_parent(clk[ipu2_di0_pre_sel], clk[pll5_video_div]);
+	clk_set_parent(clk[ipu2_di1_pre_sel], clk[pll5_video_div]);
+	clk_set_parent(clk[ipu1_di0_sel], clk[ipu1_di0_pre]);
+	clk_set_parent(clk[ipu1_di1_sel], clk[ipu1_di1_pre]);
+	clk_set_parent(clk[ipu2_di0_sel], clk[ipu2_di0_pre]);
+	clk_set_parent(clk[ipu2_di1_sel], clk[ipu2_di1_pre]);
+
 	/*
 	 * The gpmi needs 100MHz frequency in the EDO/Sync mode,
 	 * We can not get the 100MHz from the pll2_pfd0_352m.
@@ -485,10 +496,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
-	base = of_iomap(np, 0);
-	WARN_ON(!base);
-	irq = irq_of_parse_and_map(np, 0);
-	mxc_timer_init(base, irq);
+	mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"));
 }
 CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index 4c86f3035205..21cf06cebade 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -18,27 +18,43 @@
 #include "clk.h"
 #include "common.h"
 
-static const char const *step_sels[]		= { "osc", "pll2_pfd2", };
-static const char const *pll1_sw_sels[]		= { "pll1_sys", "step", };
-static const char const *ocram_alt_sels[]	= { "pll2_pfd2", "pll3_pfd1", };
-static const char const *ocram_sels[]		= { "periph", "ocram_alt_sels", };
-static const char const *pre_periph_sels[]	= { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", };
-static const char const *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", "osc", "dummy", };
-static const char const *periph2_clk2_sels[]	= { "pll3_usb_otg", "pll2_bus", };
-static const char const *periph_sels[]		= { "pre_periph_sel", "periph_clk2_podf", };
-static const char const *periph2_sels[]		= { "pre_periph2_sel", "periph2_clk2_podf", };
-static const char const *csi_lcdif_sels[]	= { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", };
-static const char const *usdhc_sels[]		= { "pll2_pfd2", "pll2_pfd0", };
-static const char const *ssi_sels[]		= { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", };
-static const char const *perclk_sels[]		= { "ipg", "osc", };
-static const char const *epdc_pxp_sels[]	= { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", };
-static const char const *gpu2d_ovg_sels[]	= { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", };
-static const char const *gpu2d_sels[]		= { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", };
-static const char const *lcdif_pix_sels[]	= { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", };
-static const char const *epdc_pix_sels[]	= { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", };
-static const char const *audio_sels[]		= { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", };
-static const char const *ecspi_sels[]		= { "pll3_60m", "osc", };
-static const char const *uart_sels[]		= { "pll3_80m", "osc", };
+#define CCSR			0xc
+#define BM_CCSR_PLL1_SW_CLK_SEL	(1 << 2)
+#define CACRR			0x10
+#define CDHIPR			0x48
+#define BM_CDHIPR_ARM_PODF_BUSY	(1 << 16)
+#define ARM_WAIT_DIV_396M	2
+#define ARM_WAIT_DIV_792M	4
+#define ARM_WAIT_DIV_996M	6
+
+#define PLL_ARM			0x0
+#define BM_PLL_ARM_DIV_SELECT	(0x7f << 0)
+#define BM_PLL_ARM_POWERDOWN	(1 << 12)
+#define BM_PLL_ARM_ENABLE	(1 << 13)
+#define BM_PLL_ARM_LOCK		(1 << 31)
+#define PLL_ARM_DIV_792M	66
+
+static const char *step_sels[]		= { "osc", "pll2_pfd2", };
+static const char *pll1_sw_sels[]	= { "pll1_sys", "step", };
+static const char *ocram_alt_sels[]	= { "pll2_pfd2", "pll3_pfd1", };
+static const char *ocram_sels[]		= { "periph", "ocram_alt_sels", };
+static const char *pre_periph_sels[]	= { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", };
+static const char *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", "osc", "dummy", };
+static const char *periph2_clk2_sels[]	= { "pll3_usb_otg", "pll2_bus", };
+static const char *periph_sels[]	= { "pre_periph_sel", "periph_clk2_podf", };
+static const char *periph2_sels[]	= { "pre_periph2_sel", "periph2_clk2_podf", };
+static const char *csi_lcdif_sels[]	= { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", };
+static const char *usdhc_sels[]		= { "pll2_pfd2", "pll2_pfd0", };
+static const char *ssi_sels[]		= { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", };
+static const char *perclk_sels[]	= { "ipg", "osc", };
+static const char *epdc_pxp_sels[]	= { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", };
+static const char *gpu2d_ovg_sels[]	= { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", };
+static const char *gpu2d_sels[]		= { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", };
+static const char *lcdif_pix_sels[]	= { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", };
+static const char *epdc_pix_sels[]	= { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", };
+static const char *audio_sels[]		= { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", };
+static const char *ecspi_sels[]		= { "pll3_60m", "osc", };
+static const char *uart_sels[]		= { "pll3_80m", "osc", };
 
 static struct clk_div_table clk_enet_ref_table[] = {
 	{ .val = 0, .div = 20, },
@@ -65,13 +81,96 @@ static struct clk_div_table video_div_table[] = {
 
 static struct clk *clks[IMX6SL_CLK_END];
 static struct clk_onecell_data clk_data;
+static void __iomem *ccm_base;
+static void __iomem *anatop_base;
+
+static const u32 clks_init_on[] __initconst = {
+	IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT,
+};
+
+/*
+ * ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken
+ *           during WAIT mode entry process could cause cache memory
+ *           corruption.
+ *
+ * Software workaround:
+ *     To prevent this issue from occurring, software should ensure that the
+ * ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before
+ * entering WAIT mode.
+ *
+ * This function will set the ARM clk to max value within the 12:5 limit.
+ * As IPG clock is fixed at 66MHz(so ARM freq must not exceed 158.4MHz),
+ * ARM freq are one of below setpoints: 396MHz, 792MHz and 996MHz, since
+ * the clk APIs can NOT be called in idle thread(may cause kernel schedule
+ * as there is sleep function in PLL wait function), so here we just slow
+ * down ARM to below freq according to previous freq:
+ *
+ * run mode      wait mode
+ * 396MHz   ->   132MHz;
+ * 792MHz   ->   158.4MHz;
+ * 996MHz   ->   142.3MHz;
+ */
+static int imx6sl_get_arm_divider_for_wait(void)
+{
+	if (readl_relaxed(ccm_base + CCSR) & BM_CCSR_PLL1_SW_CLK_SEL) {
+		return ARM_WAIT_DIV_396M;
+	} else {
+		if ((readl_relaxed(anatop_base + PLL_ARM) &
+			BM_PLL_ARM_DIV_SELECT) == PLL_ARM_DIV_792M)
+			return ARM_WAIT_DIV_792M;
+		else
+			return ARM_WAIT_DIV_996M;
+	}
+}
+
+static void imx6sl_enable_pll_arm(bool enable)
+{
+	static u32 saved_pll_arm;
+	u32 val;
+
+	if (enable) {
+		saved_pll_arm = val = readl_relaxed(anatop_base + PLL_ARM);
+		val |= BM_PLL_ARM_ENABLE;
+		val &= ~BM_PLL_ARM_POWERDOWN;
+		writel_relaxed(val, anatop_base + PLL_ARM);
+		while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK))
+			;
+	} else {
+		 writel_relaxed(saved_pll_arm, anatop_base + PLL_ARM);
+	}
+}
+
+void imx6sl_set_wait_clk(bool enter)
+{
+	static unsigned long saved_arm_div;
+	int arm_div_for_wait = imx6sl_get_arm_divider_for_wait();
+
+	/*
+	 * According to hardware design, arm podf change need
+	 * PLL1 clock enabled.
+	 */
+	if (arm_div_for_wait == ARM_WAIT_DIV_396M)
+		imx6sl_enable_pll_arm(true);
+
+	if (enter) {
+		saved_arm_div = readl_relaxed(ccm_base + CACRR);
+		writel_relaxed(arm_div_for_wait, ccm_base + CACRR);
+	} else {
+		writel_relaxed(saved_arm_div, ccm_base + CACRR);
+	}
+	while (__raw_readl(ccm_base + CDHIPR) & BM_CDHIPR_ARM_PODF_BUSY)
+		;
+
+	if (arm_div_for_wait == ARM_WAIT_DIV_396M)
+		imx6sl_enable_pll_arm(false);
+}
 
 static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
 	void __iomem *base;
-	int irq;
 	int i;
+	int ret;
 
 	clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
 	clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
@@ -80,6 +179,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
+	anatop_base = base;
 
 	/*                                             type               name            parent  base         div_mask */
 	clks[IMX6SL_CLK_PLL1_SYS]      = imx_clk_pllv3(IMX_PLLV3_SYS,	  "pll1_sys",	   "osc", base,        0x7f);
@@ -127,6 +227,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	np = ccm_node;
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
+	ccm_base = base;
 
 	/* Reuse imx6q pm code */
 	imx6q_pm_set_ccm_base(base);
@@ -258,6 +359,19 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0");
 
+	/* Ensure the AHB clk is at 132MHz. */
+	ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000);
+	if (ret)
+		pr_warn("%s: failed to set AHB clock rate %d!\n",
+			__func__, ret);
+
+	/*
+	 * Make sure those always on clocks are enabled to maintain the correct
+	 * usecount and enabling/disabling of parent PLLs.
+	 */
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+		clk_prepare_enable(clks[clks_init_on[i]]);
+
 	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
 		clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]);
 		clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]);
@@ -270,9 +384,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	imx6q_set_lpm(WAIT_CLOCKED);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
-	base = of_iomap(np, 0);
-	WARN_ON(!base);
-	irq = irq_of_parse_and_map(np, 0);
-	mxc_timer_init(base, irq);
+	mxc_timer_init_dt(np);
 }
 CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c
new file mode 100644
index 000000000000..72f8902235d1
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx6sx.c
@@ -0,0 +1,524 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/clock/imx6sx-clock.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/types.h>
+
+#include "clk.h"
+#include "common.h"
+
+#define CCDR    0x4
+#define BM_CCM_CCDR_MMDC_CH0_MASK       (0x2 << 16)
+
+static const char *step_sels[]		= { "osc", "pll2_pfd2_396m", };
+static const char *pll1_sw_sels[]	= { "pll1_sys", "step", };
+static const char *periph_pre_sels[]	= { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
+static const char *periph2_pre_sels[]	= { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", };
+static const char *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", "osc", };
+static const char *periph2_clk2_sels[]	= { "pll3_usb_otg", "osc", };
+static const char *periph_sels[]	= { "periph_pre", "periph_clk2", };
+static const char *periph2_sels[]	= { "periph2_pre", "periph2_clk2", };
+static const char *ocram_sels[]		= { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
+static const char *audio_sels[]		= { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", };
+static const char *gpu_axi_sels[]	= { "pll2_pfd2_396m", "pll3_pfd0_720m", "pll3_pfd1_540m", "pll2_bus", };
+static const char *gpu_core_sels[]	= { "pll3_pfd1_540m", "pll3_pfd0_720m", "pll2_bus", "pll2_pfd2_396m", };
+static const char *ldb_di0_div_sels[]	= { "ldb_di0_div_3_5", "ldb_di0_div_7", };
+static const char *ldb_di1_div_sels[]	= { "ldb_di1_div_3_5", "ldb_di1_div_7", };
+static const char *ldb_di0_sels[]	= { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", };
+static const char *ldb_di1_sels[]	= { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
+static const char *pcie_axi_sels[]	= { "axi", "ahb", };
+static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll5_video_div", "pll4_audio_div", };
+static const char *qspi1_sels[]		= { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
+static const char *perclk_sels[]	= { "ipg", "osc", };
+static const char *usdhc_sels[]		= { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *vid_sels[]		= { "pll3_pfd1_540m", "pll3_usb_otg", "pll3_pfd3_454m", "pll4_audio_div", "pll5_video_div", };
+static const char *can_sels[]		= { "pll3_60m", "osc", "pll3_80m", "dummy", };
+static const char *uart_sels[]		= { "pll3_80m", "osc", };
+static const char *qspi2_sels[]		= { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", "dummy", "dummy", };
+static const char *enet_pre_sels[]	= { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", };
+static const char *enet_sels[]		= { "enet_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *m4_pre_sels[]	= { "pll2_bus", "pll3_usb_otg", "osc", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd3_454m", };
+static const char *m4_sels[]		= { "m4_pre_sel", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *eim_slow_sels[]	= { "ocram", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *ecspi_sels[]		= { "pll3_60m", "osc", };
+static const char *lcdif1_pre_sels[]	= { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", };
+static const char *lcdif1_sels[]	= { "lcdif1_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *lcdif2_pre_sels[]	= { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd3_594m", "pll3_pfd1_540m", };
+static const char *lcdif2_sels[]	= { "lcdif2_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *display_sels[]	= { "pll2_bus", "pll2_pfd2_396m", "pll3_usb_otg", "pll3_pfd1_540m", };
+static const char *csi_sels[]		= { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
+static const char *cko1_sels[]		= {
+	"pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
+	"dummy", "ocram", "dummy", "pxp_axi", "epdc_axi", "lcdif_pix",
+	"epdc_pix", "ahb", "ipg", "perclk", "ckil", "pll4_audio_div",
+};
+static const char *cko2_sels[]		= {
+	"dummy", "mmdc_p0_fast", "usdhc4", "usdhc1", "dummy", "wrck",
+	"ecspi_root", "dummy", "usdhc3", "pcie", "arm", "csi_core",
+	"lcdif_axi", "dummy", "osc", "dummy", "gpu2d_ovg_core",
+	"usdhc2", "ssi1", "ssi2", "ssi3", "gpu2d_core", "dummy",
+	"dummy", "dummy", "dummy", "esai_extal", "eim_slow", "uart_serial",
+	"spdif", "asrc", "dummy",
+};
+static const char *cko_sels[] = { "cko1", "cko2", };
+static const char *lvds_sels[]	= {
+	"arm", "pll1_sys", "dummy", "dummy", "dummy", "dummy", "dummy", "pll5_video_div",
+	"dummy", "dummy", "pcie_ref_125m", "dummy", "usbphy1", "usbphy2",
+};
+
+static struct clk *clks[IMX6SX_CLK_CLK_END];
+static struct clk_onecell_data clk_data;
+
+static int const clks_init_on[] __initconst = {
+	IMX6SX_CLK_AIPS_TZ1, IMX6SX_CLK_AIPS_TZ2, IMX6SX_CLK_AIPS_TZ3,
+	IMX6SX_CLK_IPMUX1, IMX6SX_CLK_IPMUX2, IMX6SX_CLK_IPMUX3,
+	IMX6SX_CLK_WAKEUP, IMX6SX_CLK_MMDC_P0_FAST, IMX6SX_CLK_MMDC_P0_IPG,
+	IMX6SX_CLK_ROM, IMX6SX_CLK_ARM, IMX6SX_CLK_IPG, IMX6SX_CLK_OCRAM,
+	IMX6SX_CLK_PER2_MAIN, IMX6SX_CLK_PERCLK, IMX6SX_CLK_M4,
+	IMX6SX_CLK_QSPI1, IMX6SX_CLK_QSPI2, IMX6SX_CLK_UART_IPG,
+	IMX6SX_CLK_UART_SERIAL, IMX6SX_CLK_I2C3, IMX6SX_CLK_ECSPI5,
+	IMX6SX_CLK_CAN1_IPG, IMX6SX_CLK_CAN1_SERIAL, IMX6SX_CLK_CAN2_IPG,
+	IMX6SX_CLK_CAN2_SERIAL, IMX6SX_CLK_CANFD, IMX6SX_CLK_EPIT1,
+	IMX6SX_CLK_EPIT2,
+};
+
+static struct clk_div_table clk_enet_ref_table[] = {
+	{ .val = 0, .div = 20, },
+	{ .val = 1, .div = 10, },
+	{ .val = 2, .div = 5, },
+	{ .val = 3, .div = 4, },
+	{ }
+};
+
+static struct clk_div_table post_div_table[] = {
+	{ .val = 2, .div = 1, },
+	{ .val = 1, .div = 2, },
+	{ .val = 0, .div = 4, },
+	{ }
+};
+
+static struct clk_div_table video_div_table[] = {
+	{ .val = 0, .div = 1, },
+	{ .val = 1, .div = 2, },
+	{ .val = 2, .div = 1, },
+	{ .val = 3, .div = 4, },
+	{ }
+};
+
+static u32 share_count_asrc;
+static u32 share_count_audio;
+static u32 share_count_esai;
+
+static void __init imx6sx_clocks_init(struct device_node *ccm_node)
+{
+	struct device_node *np;
+	void __iomem *base;
+	int i;
+
+	clks[IMX6SX_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+
+	clks[IMX6SX_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
+	clks[IMX6SX_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc");
+
+	/* ipp_di clock is external input */
+	clks[IMX6SX_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0");
+	clks[IMX6SX_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1");
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	/*                                              type               name             parent_name   base         div_mask */
+	clks[IMX6SX_CLK_PLL1_SYS]       = imx_clk_pllv3(IMX_PLLV3_SYS,     "pll1_sys",      "osc",        base,        0x7f);
+	clks[IMX6SX_CLK_PLL2_BUS]       = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus",      "osc",        base + 0x30, 0x1);
+	clks[IMX6SX_CLK_PLL3_USB_OTG]   = imx_clk_pllv3(IMX_PLLV3_USB,     "pll3_usb_otg",  "osc",        base + 0x10, 0x3);
+	clks[IMX6SX_CLK_PLL4_AUDIO]     = imx_clk_pllv3(IMX_PLLV3_AV,      "pll4_audio",    "osc",        base + 0x70, 0x7f);
+	clks[IMX6SX_CLK_PLL5_VIDEO]     = imx_clk_pllv3(IMX_PLLV3_AV,      "pll5_video",    "osc",        base + 0xa0, 0x7f);
+	clks[IMX6SX_CLK_PLL6_ENET]      = imx_clk_pllv3(IMX_PLLV3_ENET,    "pll6_enet",     "osc",        base + 0xe0, 0x3);
+	clks[IMX6SX_CLK_PLL7_USB_HOST]  = imx_clk_pllv3(IMX_PLLV3_USB,     "pll7_usb_host", "osc",        base + 0x20, 0x3);
+
+	/*
+	 * Bit 20 is the reserved and read-only bit, we do this only for:
+	 * - Do nothing for usbphy clk_enable/disable
+	 * - Keep refcount when do usbphy clk_enable/disable, in that case,
+	 * the clk framework may need to enable/disable usbphy's parent
+	 */
+	clks[IMX6SX_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg",  base + 0x10, 20);
+	clks[IMX6SX_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+
+	/*
+	 * usbphy*_gate needs to be on after system boots up, and software
+	 * never needs to control it anymore.
+	 */
+	clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+	clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
+
+	/* FIXME 100Mhz is used for pcie ref for all imx6 pcie, excepted imx6q */
+	clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5);
+	clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
+
+	clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate("lvds1_out", "lvds1_sel", base + 0x160, 10);
+
+	clks[IMX6SX_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+			base + 0xe0, 0, 2, 0, clk_enet_ref_table,
+			&imx_ccm_lock);
+	clks[IMX6SX_CLK_ENET2_REF] = clk_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0,
+			base + 0xe0, 2, 2, 0, clk_enet_ref_table,
+			&imx_ccm_lock);
+	clks[IMX6SX_CLK_ENET2_REF_125M] = imx_clk_gate("enet2_ref_125m", "enet2_ref", base + 0xe0, 20);
+
+	clks[IMX6SX_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
+	clks[IMX6SX_CLK_ENET_PTP] = imx_clk_gate("enet_ptp_25m", "enet_ptp_ref", base + 0xe0, 21);
+
+	/*                                       name              parent_name     reg           idx */
+	clks[IMX6SX_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
+	clks[IMX6SX_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus",     base + 0x100, 1);
+	clks[IMX6SX_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus",     base + 0x100, 2);
+	clks[IMX6SX_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus",     base + 0x100, 3);
+	clks[IMX6SX_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0,  0);
+	clks[IMX6SX_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0,  1);
+	clks[IMX6SX_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0,  2);
+	clks[IMX6SX_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0,  3);
+
+	/*                                                name         parent_name       mult div */
+	clks[IMX6SX_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1,   2);
+	clks[IMX6SX_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg",   1,   4);
+	clks[IMX6SX_CLK_PLL3_80M]  = imx_clk_fixed_factor("pll3_80m",  "pll3_usb_otg",   1,   6);
+	clks[IMX6SX_CLK_PLL3_60M]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1,   8);
+	clks[IMX6SX_CLK_TWD]       = imx_clk_fixed_factor("twd",       "arm",            1,   2);
+	clks[IMX6SX_CLK_GPT_3M]    = imx_clk_fixed_factor("gpt_3m",    "osc",            1,   8);
+
+	clks[IMX6SX_CLK_PLL4_POST_DIV]  = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio",
+				CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clks[IMX6SX_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div",
+				CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
+	clks[IMX6SX_CLK_PLL5_POST_DIV]  = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video",
+				CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clks[IMX6SX_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div",
+				CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+
+	/*                                                name                reg           shift   width   parent_names       num_parents */
+	clks[IMX6SX_CLK_LVDS1_SEL]          = imx_clk_mux("lvds1_sel",        base + 0x160, 0,      5,      lvds_sels,         ARRAY_SIZE(lvds_sels));
+
+	np = ccm_node;
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	imx6q_pm_set_ccm_base(base);
+
+	/*                                                name                reg           shift   width   parent_names       num_parents */
+	clks[IMX6SX_CLK_STEP]               = imx_clk_mux("step",             base + 0xc,   8,      1,      step_sels,         ARRAY_SIZE(step_sels));
+	clks[IMX6SX_CLK_PLL1_SW]            = imx_clk_mux("pll1_sw",          base + 0xc,   2,      1,      pll1_sw_sels,      ARRAY_SIZE(pll1_sw_sels));
+	clks[IMX6SX_CLK_OCRAM_SEL]          = imx_clk_mux("ocram_sel",        base + 0x14,  6,      2,      ocram_sels,        ARRAY_SIZE(ocram_sels));
+	clks[IMX6SX_CLK_PERIPH_PRE]         = imx_clk_mux("periph_pre",       base + 0x18,  18,     2,      periph_pre_sels,   ARRAY_SIZE(periph_pre_sels));
+	clks[IMX6SX_CLK_PERIPH2_PRE]        = imx_clk_mux("periph2_pre",      base + 0x18,  21,     2,      periph2_pre_sels,   ARRAY_SIZE(periph2_pre_sels));
+	clks[IMX6SX_CLK_PERIPH_CLK2_SEL]    = imx_clk_mux("periph_clk2_sel",  base + 0x18,  12,     2,      periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
+	clks[IMX6SX_CLK_PERIPH2_CLK2_SEL]   = imx_clk_mux("periph2_clk2_sel", base + 0x18,  20,     1,      periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
+	clks[IMX6SX_CLK_PCIE_AXI_SEL]       = imx_clk_mux("pcie_axi_sel",     base + 0x18,  10,     1,      pcie_axi_sels,     ARRAY_SIZE(pcie_axi_sels));
+	clks[IMX6SX_CLK_GPU_AXI_SEL]        = imx_clk_mux("gpu_axi_sel",      base + 0x18,  8,      2,      gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+	clks[IMX6SX_CLK_GPU_CORE_SEL]       = imx_clk_mux("gpu_core_sel",     base + 0x18,  4,      2,      gpu_core_sels,     ARRAY_SIZE(gpu_core_sels));
+	clks[IMX6SX_CLK_EIM_SLOW_SEL]       = imx_clk_mux("eim_slow_sel",     base + 0x1c,  29,     2,      eim_slow_sels,     ARRAY_SIZE(eim_slow_sels));
+	clks[IMX6SX_CLK_USDHC1_SEL]         = imx_clk_mux("usdhc1_sel",       base + 0x1c,  16,     1,      usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clks[IMX6SX_CLK_USDHC2_SEL]         = imx_clk_mux("usdhc2_sel",       base + 0x1c,  17,     1,      usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clks[IMX6SX_CLK_USDHC3_SEL]         = imx_clk_mux("usdhc3_sel",       base + 0x1c,  18,     1,      usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clks[IMX6SX_CLK_USDHC4_SEL]         = imx_clk_mux("usdhc4_sel",       base + 0x1c,  19,     1,      usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clks[IMX6SX_CLK_SSI3_SEL]           = imx_clk_mux("ssi3_sel",         base + 0x1c,  14,     2,      ssi_sels,          ARRAY_SIZE(ssi_sels));
+	clks[IMX6SX_CLK_SSI2_SEL]           = imx_clk_mux("ssi2_sel",         base + 0x1c,  12,     2,      ssi_sels,          ARRAY_SIZE(ssi_sels));
+	clks[IMX6SX_CLK_SSI1_SEL]           = imx_clk_mux("ssi1_sel",         base + 0x1c,  10,     2,      ssi_sels,          ARRAY_SIZE(ssi_sels));
+	clks[IMX6SX_CLK_QSPI1_SEL]          = imx_clk_mux_flags("qspi1_sel", base + 0x1c,  7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels), CLK_SET_RATE_PARENT);
+	clks[IMX6SX_CLK_PERCLK_SEL]         = imx_clk_mux("perclk_sel",       base + 0x1c,  6,      1,      perclk_sels,       ARRAY_SIZE(perclk_sels));
+	clks[IMX6SX_CLK_VID_SEL]            = imx_clk_mux("vid_sel",          base + 0x20,  21,     3,      vid_sels,          ARRAY_SIZE(vid_sels));
+	clks[IMX6SX_CLK_ESAI_SEL]           = imx_clk_mux("esai_sel",         base + 0x20,  19,     2,      audio_sels,        ARRAY_SIZE(audio_sels));
+	clks[IMX6SX_CLK_CAN_SEL]            = imx_clk_mux("can_sel",          base + 0x20,  8,      2,      can_sels,          ARRAY_SIZE(can_sels));
+	clks[IMX6SX_CLK_UART_SEL]           = imx_clk_mux("uart_sel",         base + 0x24,  6,      1,      uart_sels,         ARRAY_SIZE(uart_sels));
+	clks[IMX6SX_CLK_QSPI2_SEL]          = imx_clk_mux_flags("qspi2_sel", base + 0x2c, 15, 3, qspi2_sels, ARRAY_SIZE(qspi2_sels), CLK_SET_RATE_PARENT);
+	clks[IMX6SX_CLK_SPDIF_SEL]          = imx_clk_mux("spdif_sel",        base + 0x30,  20,     2,      audio_sels,        ARRAY_SIZE(audio_sels));
+	clks[IMX6SX_CLK_AUDIO_SEL]          = imx_clk_mux("audio_sel",        base + 0x30,  7,      2,      audio_sels,        ARRAY_SIZE(audio_sels));
+	clks[IMX6SX_CLK_ENET_PRE_SEL]       = imx_clk_mux("enet_pre_sel",     base + 0x34,  15,     3,      enet_pre_sels,     ARRAY_SIZE(enet_pre_sels));
+	clks[IMX6SX_CLK_ENET_SEL]           = imx_clk_mux("enet_sel",         base + 0x34,  9,      3,      enet_sels,         ARRAY_SIZE(enet_sels));
+	clks[IMX6SX_CLK_M4_PRE_SEL]         = imx_clk_mux("m4_pre_sel",       base + 0x34,  6,      3,      m4_pre_sels,       ARRAY_SIZE(m4_pre_sels));
+	clks[IMX6SX_CLK_M4_SEL]             = imx_clk_mux("m4_sel",           base + 0x34,  0,      3,      m4_sels,           ARRAY_SIZE(m4_sels));
+	clks[IMX6SX_CLK_ECSPI_SEL]          = imx_clk_mux("ecspi_sel",        base + 0x38,  18,     1,      ecspi_sels,        ARRAY_SIZE(ecspi_sels));
+	clks[IMX6SX_CLK_LCDIF2_PRE_SEL]     = imx_clk_mux("lcdif2_pre_sel",   base + 0x38,  6,      3,      lcdif2_pre_sels,   ARRAY_SIZE(lcdif2_pre_sels));
+	clks[IMX6SX_CLK_LCDIF2_SEL]         = imx_clk_mux("lcdif2_sel",       base + 0x38,  0,      3,      lcdif2_sels,       ARRAY_SIZE(lcdif2_sels));
+	clks[IMX6SX_CLK_DISPLAY_SEL]        = imx_clk_mux("display_sel",      base + 0x3c,  14,     2,      display_sels,      ARRAY_SIZE(display_sels));
+	clks[IMX6SX_CLK_CSI_SEL]            = imx_clk_mux("csi_sel",          base + 0x3c,  9,      2,      csi_sels,          ARRAY_SIZE(csi_sels));
+	clks[IMX6SX_CLK_CKO1_SEL]           = imx_clk_mux("cko1_sel",         base + 0x60,  0,      4,      cko1_sels,         ARRAY_SIZE(cko1_sels));
+	clks[IMX6SX_CLK_CKO2_SEL]           = imx_clk_mux("cko2_sel",         base + 0x60,  16,     5,      cko2_sels,         ARRAY_SIZE(cko2_sels));
+	clks[IMX6SX_CLK_CKO]                = imx_clk_mux("cko",              base + 0x60,  8,      1,      cko_sels,          ARRAY_SIZE(cko_sels));
+
+	clks[IMX6SX_CLK_LDB_DI1_DIV_SEL]    = imx_clk_mux_flags("ldb_di1_div_sel", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels), CLK_SET_RATE_PARENT);
+	clks[IMX6SX_CLK_LDB_DI0_DIV_SEL]    = imx_clk_mux_flags("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels), CLK_SET_RATE_PARENT);
+	clks[IMX6SX_CLK_LDB_DI1_SEL]        = imx_clk_mux_flags("ldb_di1_sel",     base + 0x2c, 12, 3, ldb_di1_sels,      ARRAY_SIZE(ldb_di1_sels),    CLK_SET_RATE_PARENT);
+	clks[IMX6SX_CLK_LDB_DI0_SEL]        = imx_clk_mux_flags("ldb_di0_sel",     base + 0x2c, 9,  3, ldb_di0_sels,      ARRAY_SIZE(ldb_di0_sels),    CLK_SET_RATE_PARENT);
+	clks[IMX6SX_CLK_LCDIF1_PRE_SEL]     = imx_clk_mux_flags("lcdif1_pre_sel",  base + 0x38, 15, 3, lcdif1_pre_sels,   ARRAY_SIZE(lcdif1_pre_sels), CLK_SET_RATE_PARENT);
+	clks[IMX6SX_CLK_LCDIF1_SEL]         = imx_clk_mux_flags("lcdif1_sel",      base + 0x38, 9,  3, lcdif1_sels,       ARRAY_SIZE(lcdif1_sels),     CLK_SET_RATE_PARENT);
+
+	/*                                                    name              parent_name          reg          shift width */
+	clks[IMX6SX_CLK_PERIPH_CLK2]        = imx_clk_divider("periph_clk2",    "periph_clk2_sel",   base + 0x14, 27,   3);
+	clks[IMX6SX_CLK_PERIPH2_CLK2]       = imx_clk_divider("periph2_clk2",   "periph2_clk2_sel",  base + 0x14, 0,    3);
+	clks[IMX6SX_CLK_IPG]                = imx_clk_divider("ipg",            "ahb",               base + 0x14, 8,    2);
+	clks[IMX6SX_CLK_GPU_CORE_PODF]      = imx_clk_divider("gpu_core_podf",  "gpu_core_sel",      base + 0x18, 29,   3);
+	clks[IMX6SX_CLK_GPU_AXI_PODF]       = imx_clk_divider("gpu_axi_podf",   "gpu_axi_sel",       base + 0x18, 26,   3);
+	clks[IMX6SX_CLK_LCDIF1_PODF]        = imx_clk_divider("lcdif1_podf",    "lcdif1_pred",       base + 0x18, 23,   3);
+	clks[IMX6SX_CLK_QSPI1_PODF]         = imx_clk_divider("qspi1_podf",     "qspi1_sel",         base + 0x1c, 26,   3);
+	clks[IMX6SX_CLK_EIM_SLOW_PODF]      = imx_clk_divider("eim_slow_podf",  "eim_slow_sel",      base + 0x1c, 23,   3);
+	clks[IMX6SX_CLK_LCDIF2_PODF]        = imx_clk_divider("lcdif2_podf",    "lcdif2_pred",       base + 0x1c, 20,   3);
+	clks[IMX6SX_CLK_PERCLK]             = imx_clk_divider("perclk",         "perclk_sel",        base + 0x1c, 0,    6);
+	clks[IMX6SX_CLK_VID_PODF]           = imx_clk_divider("vid_podf",       "vid_sel",           base + 0x20, 24,   2);
+	clks[IMX6SX_CLK_CAN_PODF]           = imx_clk_divider("can_podf",       "can_sel",           base + 0x20, 2,    6);
+	clks[IMX6SX_CLK_USDHC4_PODF]        = imx_clk_divider("usdhc4_podf",    "usdhc4_sel",        base + 0x24, 22,   3);
+	clks[IMX6SX_CLK_USDHC3_PODF]        = imx_clk_divider("usdhc3_podf",    "usdhc3_sel",        base + 0x24, 19,   3);
+	clks[IMX6SX_CLK_USDHC2_PODF]        = imx_clk_divider("usdhc2_podf",    "usdhc2_sel",        base + 0x24, 16,   3);
+	clks[IMX6SX_CLK_USDHC1_PODF]        = imx_clk_divider("usdhc1_podf",    "usdhc1_sel",        base + 0x24, 11,   3);
+	clks[IMX6SX_CLK_UART_PODF]          = imx_clk_divider("uart_podf",      "uart_sel",          base + 0x24, 0,    6);
+	clks[IMX6SX_CLK_ESAI_PRED]          = imx_clk_divider("esai_pred",      "esai_sel",          base + 0x28, 9,    3);
+	clks[IMX6SX_CLK_ESAI_PODF]          = imx_clk_divider("esai_podf",      "esai_pred",         base + 0x28, 25,   3);
+	clks[IMX6SX_CLK_SSI3_PRED]          = imx_clk_divider("ssi3_pred",      "ssi3_sel",          base + 0x28, 22,   3);
+	clks[IMX6SX_CLK_SSI3_PODF]          = imx_clk_divider("ssi3_podf",      "ssi3_pred",         base + 0x28, 16,   6);
+	clks[IMX6SX_CLK_SSI1_PRED]          = imx_clk_divider("ssi1_pred",      "ssi1_sel",          base + 0x28, 6,    3);
+	clks[IMX6SX_CLK_SSI1_PODF]          = imx_clk_divider("ssi1_podf",      "ssi1_pred",         base + 0x28, 0,    6);
+	clks[IMX6SX_CLK_QSPI2_PRED]         = imx_clk_divider("qspi2_pred",     "qspi2_sel",         base + 0x2c, 18,   3);
+	clks[IMX6SX_CLK_QSPI2_PODF]         = imx_clk_divider("qspi2_podf",     "qspi2_pred",        base + 0x2c, 21,   6);
+	clks[IMX6SX_CLK_SSI2_PRED]          = imx_clk_divider("ssi2_pred",      "ssi2_sel",          base + 0x2c, 6,    3);
+	clks[IMX6SX_CLK_SSI2_PODF]          = imx_clk_divider("ssi2_podf",      "ssi2_pred",         base + 0x2c, 0,    6);
+	clks[IMX6SX_CLK_SPDIF_PRED]         = imx_clk_divider("spdif_pred",     "spdif_sel",         base + 0x30, 25,   3);
+	clks[IMX6SX_CLK_SPDIF_PODF]         = imx_clk_divider("spdif_podf",     "spdif_pred",        base + 0x30, 22,   3);
+	clks[IMX6SX_CLK_AUDIO_PRED]         = imx_clk_divider("audio_pred",     "audio_sel",         base + 0x30, 12,   3);
+	clks[IMX6SX_CLK_AUDIO_PODF]         = imx_clk_divider("audio_podf",     "audio_pred",        base + 0x30, 9,    3);
+	clks[IMX6SX_CLK_ENET_PODF]          = imx_clk_divider("enet_podf",      "enet_pre_sel",      base + 0x34, 12,   3);
+	clks[IMX6SX_CLK_M4_PODF]            = imx_clk_divider("m4_podf",        "m4_sel",            base + 0x34, 3,    3);
+	clks[IMX6SX_CLK_ECSPI_PODF]         = imx_clk_divider("ecspi_podf",     "ecspi_sel",         base + 0x38, 19,   6);
+	clks[IMX6SX_CLK_LCDIF1_PRED]        = imx_clk_divider("lcdif1_pred",    "lcdif1_pre_sel",    base + 0x38, 12,   3);
+	clks[IMX6SX_CLK_LCDIF2_PRED]        = imx_clk_divider("lcdif2_pred",    "lcdif2_pre_sel",    base + 0x38, 3,    3);
+	clks[IMX6SX_CLK_DISPLAY_PODF]       = imx_clk_divider("display_podf",   "display_sel",       base + 0x3c, 16,   3);
+	clks[IMX6SX_CLK_CSI_PODF]           = imx_clk_divider("csi_podf",       "csi_sel",           base + 0x3c, 11,   3);
+	clks[IMX6SX_CLK_CKO1_PODF]          = imx_clk_divider("cko1_podf",      "cko1_sel",          base + 0x60, 4,    3);
+	clks[IMX6SX_CLK_CKO2_PODF]          = imx_clk_divider("cko2_podf",      "cko2_sel",          base + 0x60, 21,   3);
+
+	clks[IMX6SX_CLK_LDB_DI0_DIV_3_5]    = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+	clks[IMX6SX_CLK_LDB_DI0_DIV_7]      = imx_clk_fixed_factor("ldb_di0_div_7",   "ldb_di0_sel", 1, 7);
+	clks[IMX6SX_CLK_LDB_DI1_DIV_3_5]    = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+	clks[IMX6SX_CLK_LDB_DI1_DIV_7]      = imx_clk_fixed_factor("ldb_di1_div_7",   "ldb_di1_sel", 1, 7);
+
+	/*                                               name        reg          shift width busy: reg,   shift parent_names       num_parents */
+	clks[IMX6SX_CLK_PERIPH]       = imx_clk_busy_mux("periph",   base + 0x14, 25,   1,    base + 0x48, 5,    periph_sels,       ARRAY_SIZE(periph_sels));
+	clks[IMX6SX_CLK_PERIPH2]      = imx_clk_busy_mux("periph2",  base + 0x14, 26,   1,    base + 0x48, 3,    periph2_sels,      ARRAY_SIZE(periph2_sels));
+	/*                                                   name             parent_name    reg          shift width busy: reg,   shift */
+	clks[IMX6SX_CLK_OCRAM_PODF]   = imx_clk_busy_divider("ocram_podf",    "ocram_sel",   base + 0x14, 16,   3,    base + 0x48, 0);
+	clks[IMX6SX_CLK_AHB]          = imx_clk_busy_divider("ahb",           "periph",      base + 0x14, 10,   3,    base + 0x48, 1);
+	clks[IMX6SX_CLK_MMDC_PODF]    = imx_clk_busy_divider("mmdc_podf",     "periph2",     base + 0x14, 3,    3,    base + 0x48, 2);
+	clks[IMX6SX_CLK_ARM]          = imx_clk_busy_divider("arm",           "pll1_sw",     base + 0x10, 0,    3,    base + 0x48, 16);
+
+	/*                                            name             parent_name          reg         shift */
+	/* CCGR0 */
+	clks[IMX6SX_CLK_AIPS_TZ1]     = imx_clk_gate2("aips_tz1",      "ahb",               base + 0x68, 0);
+	clks[IMX6SX_CLK_AIPS_TZ2]     = imx_clk_gate2("aips_tz2",      "ahb",               base + 0x68, 2);
+	clks[IMX6SX_CLK_APBH_DMA]     = imx_clk_gate2("apbh_dma",      "usdhc3",            base + 0x68, 4);
+	clks[IMX6SX_CLK_ASRC_MEM]     = imx_clk_gate2_shared("asrc_mem", "ahb",             base + 0x68, 6, &share_count_asrc);
+	clks[IMX6SX_CLK_ASRC_IPG]     = imx_clk_gate2_shared("asrc_ipg", "ahb",             base + 0x68, 6, &share_count_asrc);
+	clks[IMX6SX_CLK_CAAM_MEM]     = imx_clk_gate2("caam_mem",      "ahb",               base + 0x68, 8);
+	clks[IMX6SX_CLK_CAAM_ACLK]    = imx_clk_gate2("caam_aclk",     "ahb",               base + 0x68, 10);
+	clks[IMX6SX_CLK_CAAM_IPG]     = imx_clk_gate2("caam_ipg",      "ipg",               base + 0x68, 12);
+	clks[IMX6SX_CLK_CAN1_IPG]     = imx_clk_gate2("can1_ipg",      "ipg",               base + 0x68, 14);
+	clks[IMX6SX_CLK_CAN1_SERIAL]  = imx_clk_gate2("can1_serial",   "can_podf",          base + 0x68, 16);
+	clks[IMX6SX_CLK_CAN2_IPG]     = imx_clk_gate2("can2_ipg",      "ipg",               base + 0x68, 18);
+	clks[IMX6SX_CLK_CAN2_SERIAL]  = imx_clk_gate2("can2_serial",   "can_podf",          base + 0x68, 20);
+	clks[IMX6SX_CLK_DCIC1]        = imx_clk_gate2("dcic1",         "display_podf",      base + 0x68, 24);
+	clks[IMX6SX_CLK_DCIC2]        = imx_clk_gate2("dcic2",         "display_podf",      base + 0x68, 26);
+	clks[IMX6SX_CLK_AIPS_TZ3]     = imx_clk_gate2("aips_tz3",      "ahb",               base + 0x68, 30);
+
+	/* CCGR1 */
+	clks[IMX6SX_CLK_ECSPI1]       = imx_clk_gate2("ecspi1",        "ecspi_podf",        base + 0x6c, 0);
+	clks[IMX6SX_CLK_ECSPI2]       = imx_clk_gate2("ecspi2",        "ecspi_podf",        base + 0x6c, 2);
+	clks[IMX6SX_CLK_ECSPI3]       = imx_clk_gate2("ecspi3",        "ecspi_podf",        base + 0x6c, 4);
+	clks[IMX6SX_CLK_ECSPI4]       = imx_clk_gate2("ecspi4",        "ecspi_podf",        base + 0x6c, 6);
+	clks[IMX6SX_CLK_ECSPI5]       = imx_clk_gate2("ecspi5",        "ecspi_podf",        base + 0x6c, 8);
+	clks[IMX6SX_CLK_EPIT1]        = imx_clk_gate2("epit1",         "perclk",            base + 0x6c, 12);
+	clks[IMX6SX_CLK_EPIT2]        = imx_clk_gate2("epit2",         "perclk",            base + 0x6c, 14);
+	clks[IMX6SX_CLK_ESAI_EXTAL]   = imx_clk_gate2_shared("esai_extal", "esai_podf",     base + 0x6c, 16, &share_count_esai);
+	clks[IMX6SX_CLK_ESAI_IPG]     = imx_clk_gate2_shared("esai_ipg",   "ahb",           base + 0x6c, 16, &share_count_esai);
+	clks[IMX6SX_CLK_ESAI_MEM]     = imx_clk_gate2_shared("esai_mem",   "ahb",           base + 0x6c, 16, &share_count_esai);
+	clks[IMX6SX_CLK_WAKEUP]       = imx_clk_gate2("wakeup",        "ipg",               base + 0x6c, 18);
+	clks[IMX6SX_CLK_GPT_BUS]      = imx_clk_gate2("gpt_bus",       "perclk",            base + 0x6c, 20);
+	clks[IMX6SX_CLK_GPT_SERIAL]   = imx_clk_gate2("gpt_serial",    "perclk",            base + 0x6c, 22);
+	clks[IMX6SX_CLK_GPU]          = imx_clk_gate2("gpu",           "gpu_core_podf",     base + 0x6c, 26);
+	clks[IMX6SX_CLK_CANFD]        = imx_clk_gate2("canfd",         "can_podf",          base + 0x6c, 30);
+
+	/* CCGR2 */
+	clks[IMX6SX_CLK_CSI]          = imx_clk_gate2("csi",           "csi_podf",          base + 0x70, 2);
+	clks[IMX6SX_CLK_I2C1]         = imx_clk_gate2("i2c1",          "perclk",            base + 0x70, 6);
+	clks[IMX6SX_CLK_I2C2]         = imx_clk_gate2("i2c2",          "perclk",            base + 0x70, 8);
+	clks[IMX6SX_CLK_I2C3]         = imx_clk_gate2("i2c3",          "perclk",            base + 0x70, 10);
+	clks[IMX6SX_CLK_OCOTP]        = imx_clk_gate2("ocotp",         "ipg",               base + 0x70, 12);
+	clks[IMX6SX_CLK_IOMUXC]       = imx_clk_gate2("iomuxc",        "lcdif1_podf",       base + 0x70, 14);
+	clks[IMX6SX_CLK_IPMUX1]       = imx_clk_gate2("ipmux1",        "ahb",               base + 0x70, 16);
+	clks[IMX6SX_CLK_IPMUX2]       = imx_clk_gate2("ipmux2",        "ahb",               base + 0x70, 18);
+	clks[IMX6SX_CLK_IPMUX3]       = imx_clk_gate2("ipmux3",        "ahb",               base + 0x70, 20);
+	clks[IMX6SX_CLK_TZASC1]       = imx_clk_gate2("tzasc1",        "mmdc_podf",         base + 0x70, 22);
+	clks[IMX6SX_CLK_LCDIF_APB]    = imx_clk_gate2("lcdif_apb",     "display_podf",      base + 0x70, 28);
+	clks[IMX6SX_CLK_PXP_AXI]      = imx_clk_gate2("pxp_axi",       "display_podf",      base + 0x70, 30);
+
+	/* CCGR3 */
+	clks[IMX6SX_CLK_M4]           = imx_clk_gate2("m4",            "m4_podf",           base + 0x74, 2);
+	clks[IMX6SX_CLK_ENET]         = imx_clk_gate2("enet",          "ipg",               base + 0x74, 4);
+	clks[IMX6SX_CLK_ENET_AHB]     = imx_clk_gate2("enet_ahb",      "enet_sel",          base + 0x74, 4);
+	clks[IMX6SX_CLK_DISPLAY_AXI]  = imx_clk_gate2("display_axi",   "display_podf",      base + 0x74, 6);
+	clks[IMX6SX_CLK_LCDIF2_PIX]   = imx_clk_gate2("lcdif2_pix",    "lcdif2_sel",        base + 0x74, 8);
+	clks[IMX6SX_CLK_LCDIF1_PIX]   = imx_clk_gate2("lcdif1_pix",    "lcdif1_sel",        base + 0x74, 10);
+	clks[IMX6SX_CLK_LDB_DI0]      = imx_clk_gate2("ldb_di0",       "ldb_di0_div_sel",   base + 0x74, 12);
+	clks[IMX6SX_CLK_QSPI1]        = imx_clk_gate2("qspi1",         "qspi1_podf",        base + 0x74, 14);
+	clks[IMX6SX_CLK_MLB]          = imx_clk_gate2("mlb",           "ahb",               base + 0x74, 18);
+	clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2("mmdc_p0_fast",  "mmdc_podf",         base + 0x74, 20);
+	clks[IMX6SX_CLK_MMDC_P0_IPG]  = imx_clk_gate2("mmdc_p0_ipg",   "ipg",               base + 0x74, 24);
+	clks[IMX6SX_CLK_OCRAM]        = imx_clk_gate2("ocram",         "ocram_podf",        base + 0x74, 28);
+
+	/* CCGR4 */
+	clks[IMX6SX_CLK_PCIE_AXI]     = imx_clk_gate2("pcie_axi",      "display_podf",      base + 0x78, 0);
+	clks[IMX6SX_CLK_QSPI2]        = imx_clk_gate2("qspi2",         "qspi2_podf",        base + 0x78, 10);
+	clks[IMX6SX_CLK_PER1_BCH]     = imx_clk_gate2("per1_bch",      "usdhc3",            base + 0x78, 12);
+	clks[IMX6SX_CLK_PER2_MAIN]    = imx_clk_gate2("per2_main",     "ahb",               base + 0x78, 14);
+	clks[IMX6SX_CLK_PWM1]         = imx_clk_gate2("pwm1",          "perclk",            base + 0x78, 16);
+	clks[IMX6SX_CLK_PWM2]         = imx_clk_gate2("pwm2",          "perclk",            base + 0x78, 18);
+	clks[IMX6SX_CLK_PWM3]         = imx_clk_gate2("pwm3",          "perclk",            base + 0x78, 20);
+	clks[IMX6SX_CLK_PWM4]         = imx_clk_gate2("pwm4",          "perclk",            base + 0x78, 22);
+	clks[IMX6SX_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb",  "usdhc3",            base + 0x78, 24);
+	clks[IMX6SX_CLK_GPMI_BCH]     = imx_clk_gate2("gpmi_bch",      "usdhc4",            base + 0x78, 26);
+	clks[IMX6SX_CLK_GPMI_IO]      = imx_clk_gate2("gpmi_io",       "qspi2_podf",        base + 0x78, 28);
+	clks[IMX6SX_CLK_GPMI_APB]     = imx_clk_gate2("gpmi_apb",      "usdhc3",            base + 0x78, 30);
+
+	/* CCGR5 */
+	clks[IMX6SX_CLK_ROM]          = imx_clk_gate2("rom",           "ahb",               base + 0x7c, 0);
+	clks[IMX6SX_CLK_SDMA]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
+	clks[IMX6SX_CLK_SPBA]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
+	clks[IMX6SX_CLK_AUDIO]        = imx_clk_gate2_shared("audio",  "audio_podf",        base + 0x7c, 14, &share_count_audio);
+	clks[IMX6SX_CLK_SPDIF]        = imx_clk_gate2_shared("spdif",  "spdif_podf",        base + 0x7c, 14, &share_count_audio);
+	clks[IMX6SX_CLK_SSI1_IPG]     = imx_clk_gate2("ssi1_ipg",      "ipg",               base + 0x7c, 18);
+	clks[IMX6SX_CLK_SSI2_IPG]     = imx_clk_gate2("ssi2_ipg",      "ipg",               base + 0x7c, 20);
+	clks[IMX6SX_CLK_SSI3_IPG]     = imx_clk_gate2("ssi3_ipg",      "ipg",               base + 0x7c, 22);
+	clks[IMX6SX_CLK_SSI1]         = imx_clk_gate2("ssi1",          "ssi1_podf",         base + 0x7c, 18);
+	clks[IMX6SX_CLK_SSI2]         = imx_clk_gate2("ssi2",          "ssi2_podf",         base + 0x7c, 20);
+	clks[IMX6SX_CLK_SSI3]         = imx_clk_gate2("ssi3",          "ssi3_podf",         base + 0x7c, 22);
+	clks[IMX6SX_CLK_UART_IPG]     = imx_clk_gate2("uart_ipg",      "ipg",               base + 0x7c, 24);
+	clks[IMX6SX_CLK_UART_SERIAL]  = imx_clk_gate2("uart_serial",   "uart_podf",         base + 0x7c, 26);
+	clks[IMX6SX_CLK_SAI1_IPG]     = imx_clk_gate2("sai1_ipg",      "ipg",               base + 0x7c, 28);
+	clks[IMX6SX_CLK_SAI2_IPG]     = imx_clk_gate2("sai2_ipg",      "ipg",               base + 0x7c, 30);
+	clks[IMX6SX_CLK_SAI1]         = imx_clk_gate2("sai1",          "ssi1_podf",         base + 0x7c, 28);
+	clks[IMX6SX_CLK_SAI2]         = imx_clk_gate2("sai2",          "ssi2_podf",         base + 0x7c, 30);
+
+	/* CCGR6 */
+	clks[IMX6SX_CLK_USBOH3]       = imx_clk_gate2("usboh3",        "ipg",               base + 0x80, 0);
+	clks[IMX6SX_CLK_USDHC1]       = imx_clk_gate2("usdhc1",        "usdhc1_podf",       base + 0x80, 2);
+	clks[IMX6SX_CLK_USDHC2]       = imx_clk_gate2("usdhc2",        "usdhc2_podf",       base + 0x80, 4);
+	clks[IMX6SX_CLK_USDHC3]       = imx_clk_gate2("usdhc3",        "usdhc3_podf",       base + 0x80, 6);
+	clks[IMX6SX_CLK_USDHC4]       = imx_clk_gate2("usdhc4",        "usdhc4_podf",       base + 0x80, 8);
+	clks[IMX6SX_CLK_EIM_SLOW]     = imx_clk_gate2("eim_slow",      "eim_slow_podf",     base + 0x80, 10);
+	clks[IMX6SX_CLK_PWM8]         = imx_clk_gate2("pwm8",          "perclk",            base + 0x80, 16);
+	clks[IMX6SX_CLK_VADC]         = imx_clk_gate2("vadc",          "vid_podf",          base + 0x80, 20);
+	clks[IMX6SX_CLK_GIS]          = imx_clk_gate2("gis",           "display_podf",      base + 0x80, 22);
+	clks[IMX6SX_CLK_I2C4]         = imx_clk_gate2("i2c4",          "perclk",            base + 0x80, 24);
+	clks[IMX6SX_CLK_PWM5]         = imx_clk_gate2("pwm5",          "perclk",            base + 0x80, 26);
+	clks[IMX6SX_CLK_PWM6]         = imx_clk_gate2("pwm6",          "perclk",            base + 0x80, 28);
+	clks[IMX6SX_CLK_PWM7]         = imx_clk_gate2("pwm7",          "perclk",            base + 0x80, 30);
+
+	clks[IMX6SX_CLK_CKO1]         = imx_clk_gate("cko1",           "cko1_podf",         base + 0x60, 7);
+	clks[IMX6SX_CLK_CKO2]         = imx_clk_gate("cko2",           "cko2_podf",         base + 0x60, 24);
+
+	/* mask handshake of mmdc */
+	writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		if (IS_ERR(clks[i]))
+			pr_err("i.MX6sx clk %d: register failed with %ld\n", i, PTR_ERR(clks[i]));
+
+	clk_data.clks = clks;
+	clk_data.clk_num = ARRAY_SIZE(clks);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	clk_register_clkdev(clks[IMX6SX_CLK_GPT_BUS], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clks[IMX6SX_CLK_GPT_SERIAL], "per", "imx-gpt.0");
+
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+		clk_prepare_enable(clks[clks_init_on[i]]);
+
+	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
+		clk_prepare_enable(clks[IMX6SX_CLK_USBPHY1_GATE]);
+		clk_prepare_enable(clks[IMX6SX_CLK_USBPHY2_GATE]);
+	}
+
+	/* Set the default 132MHz for EIM module */
+	clk_set_parent(clks[IMX6SX_CLK_EIM_SLOW_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
+	clk_set_rate(clks[IMX6SX_CLK_EIM_SLOW], 132000000);
+
+	/* set parent clock for LCDIF1 pixel clock */
+	clk_set_parent(clks[IMX6SX_CLK_LCDIF1_PRE_SEL], clks[IMX6SX_CLK_PLL5_VIDEO_DIV]);
+	clk_set_parent(clks[IMX6SX_CLK_LCDIF1_SEL], clks[IMX6SX_CLK_LCDIF1_PODF]);
+
+	/* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */
+	if (clk_set_parent(clks[IMX6SX_CLK_LVDS1_SEL], clks[IMX6SX_CLK_PCIE_REF_125M]))
+		pr_err("Failed to set pcie bus parent clk.\n");
+	if (clk_set_parent(clks[IMX6SX_CLK_PCIE_AXI_SEL], clks[IMX6SX_CLK_AXI]))
+		pr_err("Failed to set pcie parent clk.\n");
+
+	/*
+	 * Init enet system AHB clock, set to 200Mhz
+	 * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
+	 */
+	clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
+	clk_set_parent(clks[IMX6SX_CLK_ENET_SEL], clks[IMX6SX_CLK_ENET_PODF]);
+	clk_set_rate(clks[IMX6SX_CLK_ENET_PODF], 200000000);
+	clk_set_rate(clks[IMX6SX_CLK_ENET_REF], 125000000);
+	clk_set_rate(clks[IMX6SX_CLK_ENET2_REF], 125000000);
+
+	/* Audio clocks */
+	clk_set_rate(clks[IMX6SX_CLK_PLL4_AUDIO_DIV], 393216000);
+
+	clk_set_parent(clks[IMX6SX_CLK_SPDIF_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+	clk_set_rate(clks[IMX6SX_CLK_SPDIF_PODF], 98304000);
+
+	clk_set_parent(clks[IMX6SX_CLK_AUDIO_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]);
+	clk_set_rate(clks[IMX6SX_CLK_AUDIO_PODF], 24000000);
+
+	clk_set_parent(clks[IMX6SX_CLK_SSI1_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+	clk_set_parent(clks[IMX6SX_CLK_SSI2_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+	clk_set_parent(clks[IMX6SX_CLK_SSI3_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+	clk_set_rate(clks[IMX6SX_CLK_SSI1_PODF], 24576000);
+	clk_set_rate(clks[IMX6SX_CLK_SSI2_PODF], 24576000);
+	clk_set_rate(clks[IMX6SX_CLK_SSI3_PODF], 24576000);
+
+	clk_set_parent(clks[IMX6SX_CLK_ESAI_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+	clk_set_rate(clks[IMX6SX_CLK_ESAI_PODF], 24576000);
+
+	/* Set parent clock for vadc */
+	clk_set_parent(clks[IMX6SX_CLK_VID_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]);
+
+	/* default parent of can_sel clock is invalid, manually set it here */
+	clk_set_parent(clks[IMX6SX_CLK_CAN_SEL], clks[IMX6SX_CLK_PLL3_60M]);
+
+	/* Update gpu clock from default 528M to 720M */
+	clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
+	clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
+
+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-gpt");
+	mxc_timer_init_dt(np);
+}
+CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index ecd66d8e20b6..22dc3ee21fd4 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -63,25 +63,25 @@ static void __iomem *anatop_base;
 static void __iomem *ccm_base;
 
 /* sources for multiplexer clocks, this is used multiple times */
-static const char const *fast_sels[]	= { "firc", "fxosc", };
-static const char const *slow_sels[]	= { "sirc_32k", "sxosc", };
-static const char const *pll1_sels[]	= { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
-static const char const *pll2_sels[]	= { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
-static const char const *sys_sels[]	= { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
-static const char const *ddr_sels[]	= { "pll2_pfd2", "sys_sel", };
-static const char const *rmii_sels[]	= { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
-static const char const *enet_ts_sels[]	= { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
-static const char const *esai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
-static const char const *sai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
-static const char const *nfc_sels[]	= { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
-static const char const *qspi_sels[]	= { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
-static const char const *esdhc_sels[]	= { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
-static const char const *dcu_sels[]	= { "pll1_pfd2", "pll3_main", };
-static const char const *gpu_sels[]	= { "pll2_pfd2", "pll3_pfd2", };
-static const char const *vadc_sels[]	= { "pll6_main_div", "pll3_main_div", "pll3_main", };
+static const char *fast_sels[]	= { "firc", "fxosc", };
+static const char *slow_sels[]	= { "sirc_32k", "sxosc", };
+static const char *pll1_sels[]	= { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
+static const char *pll2_sels[]	= { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
+static const char *sys_sels[]	= { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
+static const char *ddr_sels[]	= { "pll2_pfd2", "sys_sel", };
+static const char *rmii_sels[]	= { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
+static const char *enet_ts_sels[]	= { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
+static const char *esai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
+static const char *sai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
+static const char *nfc_sels[]	= { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
+static const char *qspi_sels[]	= { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
+static const char *esdhc_sels[]	= { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
+static const char *dcu_sels[]	= { "pll1_pfd2", "pll3_main", };
+static const char *gpu_sels[]	= { "pll2_pfd2", "pll3_pfd2", };
+static const char *vadc_sels[]	= { "pll6_main_div", "pll3_main_div", "pll3_main", };
 /* FTM counter clock source, not module clock */
-static const char const *ftm_ext_sels[]	= {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
-static const char const *ftm_fix_sels[]	= { "sxosc", "ipg_bus", };
+static const char *ftm_ext_sels[]	= {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
+static const char *ftm_fix_sels[]	= { "sxosc", "ipg_bus", };
 
 static struct clk_div_table pll4_main_div_table[] = {
 	{ .val = 0, .div = 1 },
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 048c5ad8a80b..e29f6ebe9f39 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -28,7 +28,8 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
 struct clk *clk_register_gate2(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 bit_idx,
-		u8 clk_gate_flags, spinlock_t *lock);
+		u8 clk_gate_flags, spinlock_t *lock,
+		unsigned int *share_count);
 
 struct clk * imx_obtain_fixed_clock(
 			const char *name, unsigned long rate);
@@ -37,7 +38,15 @@ static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
 		void __iomem *reg, u8 shift)
 {
 	return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
-			shift, 0, &imx_ccm_lock);
+			shift, 0, &imx_ccm_lock, NULL);
+}
+
+static inline struct clk *imx_clk_gate2_shared(const char *name,
+		const char *parent, void __iomem *reg, u8 shift,
+		unsigned int *share_count)
+{
+	return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+			shift, 0, &imx_ccm_lock, share_count);
 }
 
 struct clk *imx_clk_pfd(const char *name, const char *parent_name,
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index baf439dc22d8..9ab785ce13e8 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2014 Freescale Semiconductor, Inc. All Rights Reserved.
  */
 
 /*
@@ -17,6 +17,7 @@ struct irq_data;
 struct platform_device;
 struct pt_regs;
 struct clk;
+struct device_node;
 enum mxc_cpu_pwr_mode;
 
 void mx1_map_io(void);
@@ -56,6 +57,7 @@ void imx51_init_late(void);
 void imx53_init_late(void);
 void epit_timer_init(void __iomem *base, int irq);
 void mxc_timer_init(void __iomem *, int);
+void mxc_timer_init_dt(struct device_node *);
 int mx1_clocks_init(unsigned long fref);
 int mx21_clocks_init(unsigned long lref, unsigned long fref);
 int mx25_clocks_init(void);
@@ -99,24 +101,10 @@ enum mx3_cpu_pwr_mode {
 void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
 void imx_print_silicon_rev(const char *cpu, int srev);
 
-void avic_handle_irq(struct pt_regs *);
-void tzic_handle_irq(struct pt_regs *);
-
-#define imx1_handle_irq avic_handle_irq
-#define imx21_handle_irq avic_handle_irq
-#define imx25_handle_irq avic_handle_irq
-#define imx27_handle_irq avic_handle_irq
-#define imx31_handle_irq avic_handle_irq
-#define imx35_handle_irq avic_handle_irq
-#define imx50_handle_irq tzic_handle_irq
-#define imx51_handle_irq tzic_handle_irq
-#define imx53_handle_irq tzic_handle_irq
-
 void imx_enable_cpu(int cpu, bool enable);
 void imx_set_cpu_jump(int cpu, void *jump_addr);
 u32 imx_get_cpu_arg(int cpu);
 void imx_set_cpu_arg(int cpu, u32 arg);
-void v7_cpu_resume(void);
 #ifdef CONFIG_SMP
 void v7_secondary_startup(void);
 void imx_scu_map_io(void);
@@ -139,13 +127,25 @@ void imx_anatop_init(void);
 void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);
 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-void imx6q_set_chicken_bit(void);
+void imx6q_set_int_mem_clk_lpm(void);
+void imx6sl_set_wait_clk(bool enter);
 
 void imx_cpu_die(unsigned int cpu);
 int imx_cpu_kill(unsigned int cpu);
 
+#ifdef CONFIG_SUSPEND
+void v7_cpu_resume(void);
+void imx6_suspend(void __iomem *ocram_vbase);
+#else
+static inline void v7_cpu_resume(void) {}
+static inline void imx6_suspend(void __iomem *ocram_vbase) {}
+#endif
+
 void imx6q_pm_init(void);
+void imx6dl_pm_init(void);
+void imx6sl_pm_init(void);
 void imx6q_pm_set_ccm_base(void __iomem *base);
+
 #ifdef CONFIG_PM
 void imx5_pm_init(void);
 #else
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index ba3b498a67ec..bbe8ff1f0412 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -111,6 +111,9 @@ struct device * __init imx_soc_device_init(void)
 	case MXC_CPU_IMX6DL:
 		soc_id = "i.MX6DL";
 		break;
+	case MXC_CPU_IMX6SX:
+		soc_id = "i.MX6SX";
+		break;
 	case MXC_CPU_IMX6Q:
 		soc_id = "i.MX6Q";
 		break;
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index 23ddfb693b2d..6bcae0479049 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -68,8 +68,8 @@ int __init imx6q_cpuidle_init(void)
 	/* Need to enable SCU standby for entering WAIT modes */
 	imx_scu_standby_enable();
 
-	/* Set chicken bit to get a reliable WAIT mode support */
-	imx6q_set_chicken_bit();
+	/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
+	imx6q_set_int_mem_clk_lpm();
 
 	return cpuidle_register(&imx6q_cpuidle_driver, NULL);
 }
diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c
new file mode 100644
index 000000000000..d4b6b8171fa9
--- /dev/null
+++ b/arch/arm/mach-imx/cpuidle-imx6sl.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/module.h>
+#include <asm/cpuidle.h>
+#include <asm/proc-fns.h>
+
+#include "common.h"
+#include "cpuidle.h"
+
+static int imx6sl_enter_wait(struct cpuidle_device *dev,
+			    struct cpuidle_driver *drv, int index)
+{
+	imx6q_set_lpm(WAIT_UNCLOCKED);
+	/*
+	 * Software workaround for ERR005311, see function
+	 * description for details.
+	 */
+	imx6sl_set_wait_clk(true);
+	cpu_do_idle();
+	imx6sl_set_wait_clk(false);
+	imx6q_set_lpm(WAIT_CLOCKED);
+
+	return index;
+}
+
+static struct cpuidle_driver imx6sl_cpuidle_driver = {
+	.name = "imx6sl_cpuidle",
+	.owner = THIS_MODULE,
+	.states = {
+		/* WFI */
+		ARM_CPUIDLE_WFI_STATE,
+		/* WAIT */
+		{
+			.exit_latency = 50,
+			.target_residency = 75,
+			.flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_TIMER_STOP,
+			.enter = imx6sl_enter_wait,
+			.name = "WAIT",
+			.desc = "Clock off",
+		},
+	},
+	.state_count = 2,
+	.safe_state_index = 0,
+};
+
+int __init imx6sl_cpuidle_init(void)
+{
+	return cpuidle_register(&imx6sl_cpuidle_driver, NULL);
+}
diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h
index 786f98ecc145..24e33670417c 100644
--- a/arch/arm/mach-imx/cpuidle.h
+++ b/arch/arm/mach-imx/cpuidle.h
@@ -13,6 +13,7 @@
 #ifdef CONFIG_CPU_IDLE
 extern int imx5_cpuidle_init(void);
 extern int imx6q_cpuidle_init(void);
+extern int imx6sl_cpuidle_init(void);
 #else
 static inline int imx5_cpuidle_init(void)
 {
@@ -22,4 +23,8 @@ static inline int imx6q_cpuidle_init(void)
 {
 	return 0;
 }
+static inline int imx6sl_cpuidle_init(void)
+{
+	return 0;
+}
 #endif
diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h
index 769563fdeaa0..61a114cddc39 100644
--- a/arch/arm/mach-imx/devices-imx25.h
+++ b/arch/arm/mach-imx/devices-imx25.h
@@ -83,7 +83,3 @@ extern const struct imx_spi_imx_data imx25_cspi_data[];
 #define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
 #define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
 #define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
-
-extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[];
-#define imx25_add_mxc_pwm(id)	\
-	imx_add_mxc_pwm(&imx25_mxc_pwm_data[id])
diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h
index deee5baee88c..26389f35a2b2 100644
--- a/arch/arm/mach-imx/devices-imx51.h
+++ b/arch/arm/mach-imx/devices-imx51.h
@@ -57,10 +57,6 @@ extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
 #define imx51_add_imx2_wdt(id)	\
 	imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
 
-extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
-#define imx51_add_mxc_pwm(id)	\
-	imx_add_mxc_pwm(&imx51_mxc_pwm_data[id])
-
 extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
 #define imx51_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index 68c74fb0373c..2d260a5a307c 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -67,9 +67,6 @@ config IMX_HAVE_PLATFORM_MXC_MMC
 config IMX_HAVE_PLATFORM_MXC_NAND
 	bool
 
-config IMX_HAVE_PLATFORM_MXC_PWM
-	bool
-
 config IMX_HAVE_PLATFORM_MXC_RNGA
 	bool
 	select ARCH_HAS_RNGA
diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
index 67416fb1dc69..1cbc14cd80d1 100644
--- a/arch/arm/mach-imx/devices/Makefile
+++ b/arch/arm/mach-imx/devices/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_PWM) += platform-mxc_pwm.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index c13b76b9f6b3..61352a80bb59 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -290,15 +290,6 @@ struct imx_pata_imx_data {
 struct platform_device *__init imx_add_pata_imx(
 		const struct imx_pata_imx_data *data);
 
-struct imx_mxc_pwm_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_pwm(
-		const struct imx_mxc_pwm_data *data);
-
 /* mxc_rtc */
 struct imx_mxc_rtc_data {
 	const char *devid;
diff --git a/arch/arm/mach-imx/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c
index fc4dd7cedc11..6bd7c3f37ac0 100644
--- a/arch/arm/mach-imx/devices/platform-ipu-core.c
+++ b/arch/arm/mach-imx/devices/platform-ipu-core.c
@@ -77,7 +77,7 @@ struct platform_device *__init imx_alloc_mx3_camera(
 
 	pdev = platform_device_alloc("mx3-camera", 0);
 	if (!pdev)
-		goto err;
+		return ERR_PTR(-ENOMEM);
 
 	pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
 	if (!pdev->dev.dma_mask)
diff --git a/arch/arm/mach-imx/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c
index 11bd01d402f2..0dc0651825b1 100644
--- a/arch/arm/mach-imx/devices/platform-mx2-emma.c
+++ b/arch/arm/mach-imx/devices/platform-mx2-emma.c
@@ -12,7 +12,7 @@
 #define imx_mx2_emmaprp_data_entry_single(soc)				\
 	{								\
 		.iobase = soc ## _EMMAPRP_BASE_ADDR,			\
-		.iosize = SZ_32,					\
+		.iosize = SZ_256,					\
 		.irq = soc ## _INT_EMMAPRP,				\
 	}
 
diff --git a/arch/arm/mach-imx/devices/platform-mxc_pwm.c b/arch/arm/mach-imx/devices/platform-mxc_pwm.c
deleted file mode 100644
index dcd289777687..000000000000
--- a/arch/arm/mach-imx/devices/platform-mxc_pwm.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size)		\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _PWM ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-		.irq = soc ## _INT_PWM ## _hwid,			\
-	}
-#define imx_mxc_pwm_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_pwm_data imx21_mxc_pwm_data __initconst =
-	imx_mxc_pwm_data_entry_single(MX21, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst = {
-#define imx25_mxc_pwm_data_entry(_id, _hwid)				\
-	imx_mxc_pwm_data_entry(MX25, _id, _hwid, SZ_16K)
-	imx25_mxc_pwm_data_entry(0, 1),
-	imx25_mxc_pwm_data_entry(1, 2),
-	imx25_mxc_pwm_data_entry(2, 3),
-	imx25_mxc_pwm_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_pwm_data imx27_mxc_pwm_data __initconst =
-	imx_mxc_pwm_data_entry_single(MX27, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst = {
-#define imx51_mxc_pwm_data_entry(_id, _hwid)				\
-	imx_mxc_pwm_data_entry(MX51, _id, _hwid, SZ_16K)
-	imx51_mxc_pwm_data_entry(0, 1),
-	imx51_mxc_pwm_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-struct platform_device *__init imx_add_mxc_pwm(
-		const struct imx_mxc_pwm_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("mxc_pwm", data->id,
-			res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
deleted file mode 100644
index 9be6c1e69d68..000000000000
--- a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <video/platform_lcd.h>
-#include <linux/backlight.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx51.h"
-#include "hardware.h"
-#include "iomux-mx51.h"
-
-static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = {
-	/* LED */
-	MX51_PAD_NANDF_D10__GPIO3_30,
-	/* SWITCH */
-	NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
-			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
-			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-	/* UART 3 */
-	MX51_PAD_UART3_RXD__UART3_RXD,
-	MX51_PAD_UART3_TXD__UART3_TXD,
-	MX51_PAD_KEY_COL4__UART3_RTS,
-	MX51_PAD_KEY_COL5__UART3_CTS,
-	/* SD */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-	/* SD1 CD */
-	NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
-			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
-			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-	/* SSI */
-	MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
-	MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
-	MX51_PAD_AUD3_BB_CK__AUD3_TXC,
-	MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
-	/* LCD Backlight */
-	MX51_PAD_DI1_D1_CS__GPIO3_4,
-	/* LCD RST */
-	MX51_PAD_CSI1_D9__GPIO3_13,
-};
-
-#define GPIO_LED1	IMX_GPIO_NR(3, 30)
-#define GPIO_SWITCH1	IMX_GPIO_NR(3, 31)
-#define GPIO_LCDRST	IMX_GPIO_NR(3, 13)
-#define GPIO_LCDBL	IMX_GPIO_NR(3, 4)
-
-static void eukrea_mbimxsd51_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(GPIO_LCDRST, 1);
-	else
-		gpio_direction_output(GPIO_LCDRST, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd51_lcd_power_data = {
-	.set_power		= eukrea_mbimxsd51_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd51_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.platform_data	= &eukrea_mbimxsd51_lcd_power_data,
-};
-
-static void eukrea_mbimxsd51_bl_set_intensity(int intensity)
-{
-	if (intensity)
-		gpio_direction_output(GPIO_LCDBL, 1);
-	else
-		gpio_direction_output(GPIO_LCDBL, 0);
-}
-
-static struct generic_bl_info eukrea_mbimxsd51_bl_info = {
-	.name			= "eukrea_mbimxsd51-bl",
-	.max_intensity		= 0xff,
-	.default_intensity	= 0xff,
-	.set_bl_intensity	= eukrea_mbimxsd51_bl_set_intensity,
-};
-
-static struct platform_device eukrea_mbimxsd51_bl_dev = {
-	.name			= "generic-bl",
-	.id			= 1,
-	.dev = {
-		.platform_data	= &eukrea_mbimxsd51_bl_info,
-	},
-};
-
-static const struct gpio_led eukrea_mbimxsd51_leds[] __initconst = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_LED1,
-	},
-};
-
-static const struct gpio_led_platform_data
-		eukrea_mbimxsd51_led_info __initconst = {
-	.leds		= eukrea_mbimxsd51_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd51_leds),
-};
-
-static struct gpio_keys_button eukrea_mbimxsd51_gpio_buttons[] = {
-	{
-		.gpio		= GPIO_SWITCH1,
-		.code		= BTN_0,
-		.desc		= "BP1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static const struct gpio_keys_platform_data
-		eukrea_mbimxsd51_button_data __initconst = {
-	.buttons	= eukrea_mbimxsd51_gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd51_gpio_buttons),
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd51_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimxsd51_ssi_pdata __initconst = {
-	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-static int screen_type;
-
-static int __init eukrea_mbimxsd51_screen_type(char *options)
-{
-	if (!strcmp(options, "dvi"))
-		screen_type = 1;
-	else if (!strcmp(options, "tft"))
-		screen_type = 0;
-
-	return 0;
-}
-__setup("screen_type=", eukrea_mbimxsd51_screen_type);
-
-/*
- * system init for baseboard usage. Will be called by cpuimx51sd init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd51_baseboard_init(void)
-{
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd51_pads,
-			ARRAY_SIZE(eukrea_mbimxsd51_pads)))
-		printk(KERN_ERR "error setting mbimxsd pads !\n");
-
-	imx51_add_imx_uart(1, NULL);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	imx51_add_sdhci_esdhc_imx(0, NULL);
-
-	imx51_add_imx_ssi(0, &eukrea_mbimxsd51_ssi_pdata);
-
-	gpio_request(GPIO_LED1, "LED1");
-	gpio_direction_output(GPIO_LED1, 1);
-	gpio_free(GPIO_LED1);
-
-	gpio_request(GPIO_SWITCH1, "SWITCH1");
-	gpio_direction_input(GPIO_SWITCH1);
-	gpio_free(GPIO_SWITCH1);
-
-	gpio_request(GPIO_LCDRST, "LCDRST");
-	gpio_direction_output(GPIO_LCDRST, 0);
-	gpio_request(GPIO_LCDBL, "LCDBL");
-	gpio_direction_output(GPIO_LCDBL, 0);
-	if (!screen_type) {
-		platform_device_register(&eukrea_mbimxsd51_bl_dev);
-		platform_device_register(&eukrea_mbimxsd51_lcd_powerdev);
-	} else {
-		gpio_free(GPIO_LCDRST);
-		gpio_free(GPIO_LCDBL);
-	}
-
-	i2c_register_board_info(0, eukrea_mbimxsd51_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimxsd51_i2c_devices));
-
-	gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info);
-	imx_add_gpio_keys(&eukrea_mbimxsd51_button_data);
-	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
-}
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index a3b0b04b45c9..abf43bb47eca 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2007, 2014 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
  *
  * This program is free software; you can redistribute it and/or
@@ -20,7 +20,9 @@
 #ifndef __ASM_ARCH_MXC_HARDWARE_H__
 #define __ASM_ARCH_MXC_HARDWARE_H__
 
+#ifndef __ASSEMBLY__
 #include <asm/io.h>
+#endif
 #include <asm/sizes.h>
 
 #define addr_in_module(addr, mod) \
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index 627f16f0e9d1..de5047c8a6c8 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -12,12 +12,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
 
-	.section ".text.head", "ax"
-
-#ifdef CONFIG_SMP
 diag_reg_offset:
 	.word	g_diag_reg - .
 
@@ -34,38 +29,3 @@ ENTRY(v7_secondary_startup)
 	set_diag_reg
 	b	secondary_startup
 ENDPROC(v7_secondary_startup)
-#endif
-
-#ifdef CONFIG_ARM_CPU_SUSPEND
-/*
- * The following code must assume it is running from physical address
- * where absolute virtual addresses to the data section have to be
- * turned into relative ones.
- */
-
-#ifdef CONFIG_CACHE_L2X0
-	.macro	pl310_resume
-	adr	r0, l2x0_saved_regs_offset
-	ldr	r2, [r0]
-	add	r2, r2, r0
-	ldr	r0, [r2, #L2X0_R_PHY_BASE]	@ get physical base of l2x0
-	ldr	r1, [r2, #L2X0_R_AUX_CTRL]	@ get aux_ctrl value
-	str	r1, [r0, #L2X0_AUX_CTRL]	@ restore aux_ctrl
-	mov	r1, #0x1
-	str	r1, [r0, #L2X0_CTRL]		@ re-enable L2
-	.endm
-
-l2x0_saved_regs_offset:
-	.word	l2x0_saved_regs - .
-
-#else
-	.macro	pl310_resume
-	.endm
-#endif
-
-ENTRY(v7_cpu_resume)
-	bl	v7_invalidate_l1
-	pl310_resume
-	b	cpu_resume
-ENDPROC(v7_cpu_resume)
-#endif
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
index 3e1ec5ffe630..42a65e067443 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -38,7 +38,6 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
 	.map_io		= mx25_map_io,
 	.init_early	= imx25_init_early,
 	.init_irq	= mx25_init_irq,
-	.handle_irq	= imx25_handle_irq,
 	.init_time	= imx25_timer_init,
 	.init_machine	= imx25_dt_init,
 	.dt_compat	= imx25_dt_board_compat,
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index 4e235ecb4021..17bd4058133d 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -43,7 +43,6 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
 	.map_io		= mx27_map_io,
 	.init_early	= imx27_init_early,
 	.init_irq	= mx27_init_irq,
-	.handle_irq	= imx27_handle_irq,
 	.init_time	= imx27_timer_init,
 	.init_machine	= imx27_dt_init,
 	.dt_compat	= imx27_dt_board_compat,
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c
index e1e70ef7bc2d..581f4d6c9b8a 100644
--- a/arch/arm/mach-imx/imx31-dt.c
+++ b/arch/arm/mach-imx/imx31-dt.c
@@ -39,7 +39,6 @@ DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
 	.map_io		= mx31_map_io,
 	.init_early	= imx31_init_early,
 	.init_irq	= mx31_init_irq,
-	.handle_irq	= imx31_handle_irq,
 	.init_time	= imx31_dt_timer_init,
 	.init_machine	= imx31_dt_init,
 	.dt_compat	= imx31_dt_board_compat,
diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c
index 9d48e0065a63..a62854c59240 100644
--- a/arch/arm/mach-imx/imx35-dt.c
+++ b/arch/arm/mach-imx/imx35-dt.c
@@ -43,7 +43,6 @@ DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
 	.map_io		= mx35_map_io,
 	.init_early	= imx35_init_early,
 	.init_irq	= imx35_irq_init,
-	.handle_irq	= imx35_handle_irq,
 	.init_machine	= imx35_dt_init,
 	.dt_compat	= imx35_dt_board_compat,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 0230d78d1413..b8cd968faa52 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -38,7 +38,6 @@ DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.map_io		= mx51_map_io,
 	.init_early	= imx51_init_early,
 	.init_irq	= mx51_init_irq,
-	.handle_irq	= imx51_handle_irq,
 	.init_machine	= imx51_dt_init,
 	.init_late	= imx51_init_late,
 	.dt_compat	= imx51_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 067580b2969b..ebbb5ab63529 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -142,7 +142,6 @@ MACHINE_START(APF9328, "Armadeus APF9328")
 	.map_io       = mx1_map_io,
 	.init_early   = imx1_init_early,
 	.init_irq     = mx1_init_irq,
-	.handle_irq   = imx1_handle_irq,
 	.init_time	= apf9328_timer_init,
 	.init_machine = apf9328_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 58b864a3fc20..39406b7e3228 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -562,7 +562,6 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
 	.init_time	= armadillo5x0_timer_init,
 	.init_machine = armadillo5x0_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index 2d00476f7d2c..c97d7cb39135 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -57,7 +57,6 @@ MACHINE_START(BUG, "BugLabs BUGBase")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
 	.init_time	= bug_timer_init,
 	.init_machine = bug_board_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index ea50870bda80..75b7b6aa2720 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -314,7 +314,6 @@ MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
 	.init_time	= eukrea_cpuimx27_timer_init,
 	.init_machine = eukrea_cpuimx27_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 65e4c53e1554..1ffa27169045 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -199,7 +199,6 @@ MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
-	.handle_irq = imx35_handle_irq,
 	.init_time	= eukrea_cpuimx35_timer_init,
 	.init_machine = eukrea_cpuimx35_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
deleted file mode 100644
index 1fba2b8e983f..000000000000
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * based on board-mx51_babbage.c which is
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/i2c-gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/can/platform/mcp251x.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx51.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx51.h"
-
-#define USBH1_RST		IMX_GPIO_NR(2, 28)
-#define ETH_RST			IMX_GPIO_NR(2, 31)
-#define TSC2007_IRQGPIO_REV2	IMX_GPIO_NR(3, 12)
-#define TSC2007_IRQGPIO_REV3	IMX_GPIO_NR(4, 0)
-#define CAN_IRQGPIO		IMX_GPIO_NR(1, 1)
-#define CAN_RST			IMX_GPIO_NR(4, 15)
-#define CAN_NCS			IMX_GPIO_NR(4, 24)
-#define CAN_RXOBF_REV2		IMX_GPIO_NR(1, 4)
-#define CAN_RXOBF_REV3		IMX_GPIO_NR(3, 12)
-#define CAN_RX1BF		IMX_GPIO_NR(1, 6)
-#define CAN_TXORTS		IMX_GPIO_NR(1, 7)
-#define CAN_TX1RTS		IMX_GPIO_NR(1, 8)
-#define CAN_TX2RTS		IMX_GPIO_NR(1, 9)
-#define I2C_SCL			IMX_GPIO_NR(4, 16)
-#define I2C_SDA			IMX_GPIO_NR(4, 17)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET		0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
-
-#define	MX51_USB_PLLDIV_12_MHZ		0x00
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-#define	MX51_USB_PLL_DIV_24_MHZ		0x02
-
-static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-	MX51_PAD_USBH1_STP__USBH1_STP,
-	MX51_PAD_EIM_CS3__GPIO2_28,		/* PHY nRESET */
-
-	/* FEC */
-	MX51_PAD_EIM_DTACK__GPIO2_31,		/* PHY nRESET */
-
-	/* HSI2C */
-	MX51_PAD_I2C1_CLK__GPIO4_16,
-	MX51_PAD_I2C1_DAT__GPIO4_17,
-
-	/* I2C1 */
-	MX51_PAD_SD2_CMD__I2C1_SCL,
-	MX51_PAD_SD2_CLK__I2C1_SDA,
-
-	/* CAN */
-	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_CSPI1_SS0__GPIO4_24,		/* nCS */
-	MX51_PAD_CSI2_PIXCLK__GPIO4_15,		/* nReset */
-	MX51_PAD_GPIO1_1__GPIO1_1,		/* IRQ */
-	MX51_PAD_GPIO1_4__GPIO1_4,		/* Control signals */
-	MX51_PAD_GPIO1_6__GPIO1_6,
-	MX51_PAD_GPIO1_7__GPIO1_7,
-	MX51_PAD_GPIO1_8__GPIO1_8,
-	MX51_PAD_GPIO1_9__GPIO1_9,
-
-	/* Touchscreen */
-	/* IRQ */
-	NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
-			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
-			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-	NEW_PAD_CTRL(MX51_PAD_NANDF_D8__GPIO4_0, PAD_CTL_PUS_22K_UP |
-			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
-			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int tsc2007_get_pendown_state(struct device *dev)
-{
-	if (mx51_revision() < IMX_CHIP_REVISION_3_0)
-		return !gpio_get_value(TSC2007_IRQGPIO_REV2);
-	else
-		return !gpio_get_value(TSC2007_IRQGPIO_REV3);
-}
-
-static struct tsc2007_platform_data tsc2007_info = {
-	.model			= 2007,
-	.x_plate_ohms		= 180,
-	.get_pendown_state	= tsc2007_get_pendown_state,
-};
-
-static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}, {
-		I2C_BOARD_INFO("tsc2007", 0x49),
-		.platform_data	= &tsc2007_info,
-	},
-};
-
-static const struct mxc_nand_platform_data
-		eukrea_cpuimx51sd_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* The clock for the USBH1 ULPI port will come from the PHY. */
-	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
-			usbother_base + MX51_USB_CTRL_1_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init		= initialize_otg_port,
-	.portsc	= MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
-	.init		= initialize_usbh1_port,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx51sd_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = true;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = false;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode);
-
-static struct i2c_gpio_platform_data pdata = {
-	.sda_pin		= I2C_SDA,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= I2C_SCL,
-	.scl_is_open_drain	= 0,
-	.udelay			= 2,
-};
-
-static struct platform_device hsi2c_gpio_device = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev.platform_data	= &pdata,
-};
-
-static struct mcp251x_platform_data mcp251x_info = {
-	.oscillator_frequency = 24E6,
-};
-
-static struct spi_board_info cpuimx51sd_spi_device[] = {
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 10000000,
-		.bus_num         = 0,
-		.mode		= SPI_MODE_0,
-		.chip_select     = 0,
-		.platform_data   = &mcp251x_info,
-		/* irq number is run-time assigned */
-	},
-};
-
-static int cpuimx51sd_spi1_cs[] = {
-	CAN_NCS,
-};
-
-static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
-	.chipselect	= cpuimx51sd_spi1_cs,
-	.num_chipselect	= ARRAY_SIZE(cpuimx51sd_spi1_cs),
-};
-
-static struct platform_device *rev2_platform_devices[] __initdata = {
-	&hsi2c_gpio_device,
-};
-
-static const struct imxi2c_platform_data cpuimx51sd_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static void __init eukrea_cpuimx51sd_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
-					ARRAY_SIZE(eukrea_cpuimx51sd_pads));
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
-	imx51_add_imx2_wdt(0);
-
-	gpio_request(ETH_RST, "eth_rst");
-	gpio_set_value(ETH_RST, 1);
-	imx51_add_fec(NULL);
-
-	gpio_request(CAN_IRQGPIO, "can_irq");
-	gpio_direction_input(CAN_IRQGPIO);
-	gpio_free(CAN_IRQGPIO);
-	gpio_request(CAN_NCS, "can_ncs");
-	gpio_direction_output(CAN_NCS, 1);
-	gpio_free(CAN_NCS);
-	gpio_request(CAN_RST, "can_rst");
-	gpio_direction_output(CAN_RST, 0);
-	msleep(20);
-	gpio_set_value(CAN_RST, 1);
-	imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
-	cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO);
-	spi_register_board_info(cpuimx51sd_spi_device,
-				ARRAY_SIZE(cpuimx51sd_spi_device));
-
-	if (mx51_revision() < IMX_CHIP_REVISION_3_0) {
-		eukrea_cpuimx51sd_i2c_devices[1].irq =
-			gpio_to_irq(TSC2007_IRQGPIO_REV2),
-		platform_add_devices(rev2_platform_devices,
-			ARRAY_SIZE(rev2_platform_devices));
-		gpio_request(TSC2007_IRQGPIO_REV2, "tsc2007_irq");
-		gpio_direction_input(TSC2007_IRQGPIO_REV2);
-		gpio_free(TSC2007_IRQGPIO_REV2);
-	} else {
-		eukrea_cpuimx51sd_i2c_devices[1].irq =
-			gpio_to_irq(TSC2007_IRQGPIO_REV3),
-		imx51_add_imx_i2c(0, &cpuimx51sd_i2c_data);
-		gpio_request(TSC2007_IRQGPIO_REV3, "tsc2007_irq");
-		gpio_direction_input(TSC2007_IRQGPIO_REV3);
-		gpio_free(TSC2007_IRQGPIO_REV3);
-	}
-
-	i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
-			ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
-
-	if (otg_mode_host)
-		imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	else {
-		initialize_otg_port(NULL);
-		imx51_add_fsl_usb2_udc(&usb_pdata);
-	}
-
-	gpio_request(USBH1_RST, "usb_rst");
-	gpio_direction_output(USBH1_RST, 0);
-	msleep(20);
-	gpio_set_value(USBH1_RST, 1);
-	imx51_add_mxc_ehci_hs(1, &usbh1_config);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
-	eukrea_mbimxsd51_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx51sd_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
-	/* Maintainer: Eric Bénard <eric@eukrea.com> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.init_time	= eukrea_cpuimx51sd_timer_init,
-	.init_machine = eukrea_cpuimx51sd_init,
-	.init_late	= imx51_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 4bf454424249..e978dda1434c 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -165,7 +165,6 @@ MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
 	.map_io = mx25_map_io,
 	.init_early = imx25_init_early,
 	.init_irq = mx25_init_irq,
-	.handle_irq = imx25_handle_irq,
 	.init_time = eukrea_cpuimx25_timer_init,
 	.init_machine = eukrea_cpuimx25_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 97f9c6297fcf..b61bd8ed5568 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -604,7 +604,6 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
 	.init_time	= visstrim_m10_timer_init,
 	.init_machine = visstrim_m10_board_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 1a851aea6832..bb3ca0429680 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -71,7 +71,6 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
 	.init_time	= mx27ipcam_timer_init,
 	.init_machine = mx27ipcam_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 3da2e3e44ce9..9992089d3ad1 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -77,7 +77,6 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
 	.init_time	= mx27lite_timer_init,
 	.init_machine = mx27lite_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c
index 77b77a92bb5d..b899c0b59afd 100644
--- a/arch/arm/mach-imx/mach-imx50.c
+++ b/arch/arm/mach-imx/mach-imx50.c
@@ -31,7 +31,6 @@ static const char *imx50_dt_board_compat[] __initconst = {
 DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
 	.map_io		= mx53_map_io,
 	.init_irq	= mx53_init_irq,
-	.handle_irq	= imx50_handle_irq,
 	.init_machine	= imx50_dt_init,
 	.dt_compat	= imx50_dt_board_compat,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 65850908a4b4..2bad387956c0 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -40,7 +40,6 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
 	.map_io		= mx53_map_io,
 	.init_early	= imx53_init_early,
 	.init_irq	= mx53_init_irq,
-	.handle_irq	= imx53_handle_irq,
 	.init_machine	= imx53_dt_init,
 	.init_late	= imx53_init_late,
 	.dt_compat	= imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 76e5db4fce35..e60456d85c9d 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -182,16 +182,83 @@ static void __init imx6q_enet_phy_init(void)
 
 static void __init imx6q_1588_init(void)
 {
+	struct device_node *np;
+	struct clk *ptp_clk;
+	struct clk *enet_ref;
 	struct regmap *gpr;
+	u32 clksel;
 
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-fec");
+	if (!np) {
+		pr_warn("%s: failed to find fec node\n", __func__);
+		return;
+	}
+
+	ptp_clk = of_clk_get(np, 2);
+	if (IS_ERR(ptp_clk)) {
+		pr_warn("%s: failed to get ptp clock\n", __func__);
+		goto put_node;
+	}
+
+	enet_ref = clk_get_sys(NULL, "enet_ref");
+	if (IS_ERR(enet_ref)) {
+		pr_warn("%s: failed to get enet clock\n", __func__);
+		goto put_ptp_clk;
+	}
+
+	/*
+	 * If enet_ref from ANATOP/CCM is the PTP clock source, we need to
+	 * set bit IOMUXC_GPR1[21].  Or the PTP clock must be from pad
+	 * (external OSC), and we need to clear the bit.
+	 */
+	clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
+				       IMX6Q_GPR1_ENET_CLK_SEL_PAD;
 	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
 	if (!IS_ERR(gpr))
 		regmap_update_bits(gpr, IOMUXC_GPR1,
 				IMX6Q_GPR1_ENET_CLK_SEL_MASK,
-				IMX6Q_GPR1_ENET_CLK_SEL_ANATOP);
+				clksel);
 	else
 		pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
 
+	clk_put(enet_ref);
+put_ptp_clk:
+	clk_put(ptp_clk);
+put_node:
+	of_node_put(np);
+}
+
+static void __init imx6q_axi_init(void)
+{
+	struct regmap *gpr;
+	unsigned int mask;
+
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (!IS_ERR(gpr)) {
+		/*
+		 * Enable the cacheable attribute of VPU and IPU
+		 * AXI transactions.
+		 */
+		mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL |
+			IMX6Q_GPR4_VPU_RD_CACHE_SEL |
+			IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
+			IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
+			IMX6Q_GPR4_IPU_WR_CACHE_CTL |
+			IMX6Q_GPR4_IPU_RD_CACHE_CTL;
+		regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask);
+
+		/* Increase IPU read QoS priority */
+		regmap_update_bits(gpr, IOMUXC_GPR6,
+				IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
+				IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
+				(0xf << 16) | (0x7 << 20));
+		regmap_update_bits(gpr, IOMUXC_GPR7,
+				IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
+				IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
+				(0xf << 16) | (0x7 << 20));
+	} else {
+		pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
+	}
 }
 
 static void __init imx6q_init_machine(void)
@@ -212,15 +279,18 @@ static void __init imx6q_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 
 	imx_anatop_init();
-	imx6q_pm_init();
+	cpu_is_imx6q() ?  imx6q_pm_init() : imx6dl_pm_init();
 	imx6q_1588_init();
+	imx6q_axi_init();
 }
 
 #define OCOTP_CFG3			0x440
 #define OCOTP_CFG3_SPEED_SHIFT		16
 #define OCOTP_CFG3_SPEED_1P2GHZ		0x3
+#define OCOTP_CFG3_SPEED_996MHZ		0x2
+#define OCOTP_CFG3_SPEED_852MHZ		0x1
 
-static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
+static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev)
 {
 	struct device_node *np;
 	void __iomem *base;
@@ -238,11 +308,29 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
 		goto put_node;
 	}
 
+	/*
+	 * SPEED_GRADING[1:0] defines the max speed of ARM:
+	 * 2b'11: 1200000000Hz;
+	 * 2b'10: 996000000Hz;
+	 * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
+	 * 2b'00: 792000000Hz;
+	 * We need to set the max speed of ARM according to fuse map.
+	 */
 	val = readl_relaxed(base + OCOTP_CFG3);
 	val >>= OCOTP_CFG3_SPEED_SHIFT;
-	if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
+	val &= 0x3;
+
+	if (val != OCOTP_CFG3_SPEED_1P2GHZ)
 		if (dev_pm_opp_disable(cpu_dev, 1200000000))
 			pr_warn("failed to disable 1.2 GHz OPP\n");
+	if (val < OCOTP_CFG3_SPEED_996MHZ)
+		if (dev_pm_opp_disable(cpu_dev, 996000000))
+			pr_warn("failed to disable 996 MHz OPP\n");
+	if (cpu_is_imx6q()) {
+		if (val != OCOTP_CFG3_SPEED_852MHZ)
+			if (dev_pm_opp_disable(cpu_dev, 852000000))
+				pr_warn("failed to disable 852 MHz OPP\n");
+	}
 
 put_node:
 	of_node_put(np);
@@ -268,7 +356,7 @@ static void __init imx6q_opp_init(void)
 		goto put_node;
 	}
 
-	imx6q_opp_check_1p2ghz(cpu_dev);
+	imx6q_opp_check_speed_grading(cpu_dev);
 
 put_node:
 	of_node_put(np);
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 0f4fd4c0ab8e..ad323385115c 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -17,6 +17,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
+#include "cpuidle.h"
 
 static void __init imx6sl_fec_init(void)
 {
@@ -39,6 +40,8 @@ static void __init imx6sl_init_late(void)
 	/* imx6sl reuses imx6q cpufreq driver */
 	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
 		platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
+
+	imx6sl_cpuidle_init();
 }
 
 static void __init imx6sl_init_machine(void)
@@ -55,8 +58,7 @@ static void __init imx6sl_init_machine(void)
 
 	imx6sl_fec_init();
 	imx_anatop_init();
-	/* Reuse imx6q pm code */
-	imx6q_pm_init();
+	imx6sl_pm_init();
 }
 
 static void __init imx6sl_init_irq(void)
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
new file mode 100644
index 000000000000..02fccf6033ac
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+
+static void __init imx6sx_init_machine(void)
+{
+	struct device *parent;
+
+	mxc_arch_reset_init_dt();
+
+	parent = imx_soc_device_init();
+	if (parent == NULL)
+		pr_warn("failed to initialize soc device\n");
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+
+	imx_anatop_init();
+}
+
+static void __init imx6sx_init_irq(void)
+{
+	imx_init_revision_from_anatop();
+	imx_init_l2cache();
+	imx_src_init();
+	imx_gpc_init();
+	irqchip_init();
+}
+
+static const char *imx6sx_dt_compat[] __initconst = {
+	"fsl,imx6sx",
+	NULL,
+};
+
+DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)")
+	.map_io		= debug_ll_io_init,
+	.init_irq	= imx6sx_init_irq,
+	.init_machine	= imx6sx_init_machine,
+	.dt_compat	= imx6sx_dt_compat,
+	.restart	= mxc_restart,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index c7bc41d6b468..31df4361996f 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -289,7 +289,6 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
 	.map_io = kzm_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
 	.init_time	= kzm_timer_init,
 	.init_machine = kzm_board_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 9f883e4d6fc9..77fda3de4290 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -138,7 +138,6 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
-	.handle_irq = imx1_handle_irq,
 	.init_time	= mx1ads_timer_init,
 	.init_machine = mx1ads_init,
 	.restart	= mxc_restart,
@@ -149,7 +148,6 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
-	.handle_irq = imx1_handle_irq,
 	.init_time	= mx1ads_timer_init,
 	.init_machine = mx1ads_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index a06aa4dc37fc..703ce31d7379 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -17,51 +17,46 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/physmap.h>
+#include <linux/basic_mmio_gpio.h>
 #include <linux/gpio.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
 
 #include "common.h"
 #include "devices-imx21.h"
 #include "hardware.h"
 #include "iomux-mx21.h"
 
-/*
- * Memory-mapped I/O on MX21ADS base board
- */
-#define MX21ADS_MMIO_BASE_ADDR   0xf5000000
-#define MX21ADS_MMIO_SIZE        0xc00000
-
-#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
-		(MX21ADS_MMIO_BASE_ADDR + (offset))
+#define MX21ADS_CS8900A_REG		(MX21_CS1_BASE_ADDR + 0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG	(MX21_CS1_BASE_ADDR + 0x200000)
+#define MX21ADS_VERSION_REG		(MX21_CS1_BASE_ADDR + 0x400000)
+#define MX21ADS_IO_REG			(MX21_CS1_BASE_ADDR + 0x800000)
 
-#define MX21ADS_CS8900A_MMIO_SIZE   0x200000
-#define MX21ADS_CS8900A_IRQ_GPIO    IMX_GPIO_NR(5, 11)
-#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
-#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
-#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
+#define MX21ADS_MMC_CD			IMX_GPIO_NR(4, 25)
+#define MX21ADS_CS8900A_IRQ_GPIO	IMX_GPIO_NR(5, 11)
+#define MX21ADS_MMGPIO_BASE		(6 * 32)
 
 /* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP        0x0001 /* read */
-#define MX21ADS_IO_TP6          0x0001 /* write */
-#define MX21ADS_IO_SW_SEL       0x0002 /* read */
-#define MX21ADS_IO_TP7          0x0002 /* write */
-#define MX21ADS_IO_RESET_E_UART 0x0004
-#define MX21ADS_IO_RESET_BASE   0x0008
-#define MX21ADS_IO_CSI_CTL2     0x0010
-#define MX21ADS_IO_CSI_CTL1     0x0020
-#define MX21ADS_IO_CSI_CTL0     0x0040
-#define MX21ADS_IO_UART1_EN     0x0080
-#define MX21ADS_IO_UART4_EN     0x0100
-#define MX21ADS_IO_LCDON        0x0200
-#define MX21ADS_IO_IRDA_EN      0x0400
-#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
-#define MX21ADS_IO_IRDA_MD0_B   0x1000
-#define MX21ADS_IO_IRDA_MD1     0x2000
-#define MX21ADS_IO_LED4_ON      0x4000
-#define MX21ADS_IO_LED3_ON      0x8000
+#define MX21ADS_IO_SD_WP		(MX21ADS_MMGPIO_BASE + 0)
+#define MX21ADS_IO_TP6			(MX21ADS_IO_SD_WP)
+#define MX21ADS_IO_SW_SEL		(MX21ADS_MMGPIO_BASE + 1)
+#define MX21ADS_IO_TP7			(MX21ADS_IO_SW_SEL)
+#define MX21ADS_IO_RESET_E_UART		(MX21ADS_MMGPIO_BASE + 2)
+#define MX21ADS_IO_RESET_BASE		(MX21ADS_MMGPIO_BASE + 3)
+#define MX21ADS_IO_CSI_CTL2		(MX21ADS_MMGPIO_BASE + 4)
+#define MX21ADS_IO_CSI_CTL1		(MX21ADS_MMGPIO_BASE + 5)
+#define MX21ADS_IO_CSI_CTL0		(MX21ADS_MMGPIO_BASE + 6)
+#define MX21ADS_IO_UART1_EN		(MX21ADS_MMGPIO_BASE + 7)
+#define MX21ADS_IO_UART4_EN		(MX21ADS_MMGPIO_BASE + 8)
+#define MX21ADS_IO_LCDON		(MX21ADS_MMGPIO_BASE + 9)
+#define MX21ADS_IO_IRDA_EN		(MX21ADS_MMGPIO_BASE + 10)
+#define MX21ADS_IO_IRDA_FIR_SEL		(MX21ADS_MMGPIO_BASE + 11)
+#define MX21ADS_IO_IRDA_MD0_B		(MX21ADS_MMGPIO_BASE + 12)
+#define MX21ADS_IO_IRDA_MD1		(MX21ADS_MMGPIO_BASE + 13)
+#define MX21ADS_IO_LED4_ON		(MX21ADS_MMGPIO_BASE + 14)
+#define MX21ADS_IO_LED3_ON		(MX21ADS_MMGPIO_BASE + 15)
 
 static const int mx21ads_pins[] __initconst = {
 
@@ -143,11 +138,8 @@ static struct physmap_flash_data mx21ads_flash_data = {
 	.width = 4,
 };
 
-static struct resource mx21ads_flash_resource = {
-	.start = MX21_CS0_BASE_ADDR,
-	.end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
-	.flags = IORESOURCE_MEM,
-};
+static struct resource mx21ads_flash_resource =
+	DEFINE_RES_MEM(MX21_CS0_BASE_ADDR, SZ_32M);
 
 static struct platform_device mx21ads_nor_mtd_device = {
 	.name = "physmap-flash",
@@ -160,7 +152,7 @@ static struct platform_device mx21ads_nor_mtd_device = {
 };
 
 static struct resource mx21ads_cs8900_resources[] __initdata = {
-	DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE),
+	DEFINE_RES_MEM(MX21ADS_CS8900A_REG, SZ_1K),
 	/* irq number is run-time assigned */
 	DEFINE_RES_IRQ(-1),
 };
@@ -179,24 +171,50 @@ static const struct imxuart_platform_data uart_pdata_rts __initconst = {
 static const struct imxuart_platform_data uart_pdata_norts __initconst = {
 };
 
-static int mx21ads_fb_init(struct platform_device *pdev)
-{
-	u16 tmp;
+static struct resource mx21ads_mmgpio_resource =
+	DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat");
 
-	tmp = __raw_readw(MX21ADS_IO_REG);
-	tmp |= MX21ADS_IO_LCDON;
-	__raw_writew(tmp, MX21ADS_IO_REG);
-	return 0;
-}
+static struct bgpio_pdata mx21ads_mmgpio_pdata = {
+	.base	= MX21ADS_MMGPIO_BASE,
+	.ngpio	= 16,
+};
 
-static void mx21ads_fb_exit(struct platform_device *pdev)
-{
-	u16 tmp;
+static struct platform_device mx21ads_mmgpio = {
+	.name = "basic-mmio-gpio",
+	.id = PLATFORM_DEVID_AUTO,
+	.resource = &mx21ads_mmgpio_resource,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &mx21ads_mmgpio_pdata,
+	},
+};
 
-	tmp = __raw_readw(MX21ADS_IO_REG);
-	tmp &= ~MX21ADS_IO_LCDON;
-	__raw_writew(tmp, MX21ADS_IO_REG);
-}
+static struct regulator_consumer_supply mx21ads_lcd_regulator_consumer =
+	REGULATOR_SUPPLY("lcd", "imx-fb.0");
+
+static struct regulator_init_data mx21ads_lcd_regulator_init_data = {
+	.constraints = {
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies	= &mx21ads_lcd_regulator_consumer,
+	.num_consumer_supplies	= 1,
+};
+
+static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = {
+	.supply_name	= "LCD",
+	.microvolts	= 3300000,
+	.gpio		= MX21ADS_IO_LCDON,
+	.enable_high	= 1,
+	.init_data	= &mx21ads_lcd_regulator_init_data,
+};
+
+static struct platform_device mx21ads_lcd_regulator = {
+	.name = "reg-fixed-voltage",
+	.id = PLATFORM_DEVID_AUTO,
+	.dev = {
+		.platform_data = &mx21ads_lcd_regulator_pdata,
+	},
+};
 
 /*
  * Connected is a portrait Sharp-QVGA display
@@ -229,26 +247,30 @@ static const struct imx_fb_platform_data mx21ads_fb_data __initconst = {
 	.pwmr		= 0x00a903ff,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020008,
-
-	.init = mx21ads_fb_init,
-	.exit = mx21ads_fb_exit,
 };
 
 static int mx21ads_sdhc_get_ro(struct device *dev)
 {
-	return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+	return gpio_get_value(MX21ADS_IO_SD_WP);
 }
 
 static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
 	void *data)
 {
-	return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq,
-		IRQF_TRIGGER_FALLING, "mmc-detect", data);
+	int ret;
+
+	ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro");
+	if (ret)
+		return ret;
+
+	return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq,
+			   IRQF_TRIGGER_FALLING, "mmc-detect", data);
 }
 
 static void mx21ads_sdhc_exit(struct device *dev, void *data)
 {
-	free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data);
+	free_irq(gpio_to_irq(MX21ADS_MMC_CD), data);
+	gpio_free(MX21ADS_IO_SD_WP);
 }
 
 static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
@@ -264,29 +286,9 @@ mx21ads_nand_board_info __initconst = {
 	.hw_ecc = 1,
 };
 
-static struct map_desc mx21ads_io_desc[] __initdata = {
-	/*
-	 * Memory-mapped I/O on MX21ADS Base board:
-	 *   - CS8900A Ethernet controller
-	 *   - ST16C2552CJ UART
-	 *   - CPU and Base board version
-	 *   - Base board I/O register
-	 */
-	{
-		.virtual = MX21ADS_MMIO_BASE_ADDR,
-		.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
-		.length = MX21ADS_MMIO_SIZE,
-		.type = MT_DEVICE,
-	},
-};
-
-static void __init mx21ads_map_io(void)
-{
-	mx21_map_io();
-	iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
-}
-
 static struct platform_device *platform_devices[] __initdata = {
+	&mx21ads_mmgpio,
+	&mx21ads_lcd_regulator,
 	&mx21ads_nor_mtd_device,
 };
 
@@ -300,12 +302,13 @@ static void __init mx21ads_board_init(void)
 	imx21_add_imx_uart0(&uart_pdata_rts);
 	imx21_add_imx_uart2(&uart_pdata_norts);
 	imx21_add_imx_uart3(&uart_pdata_rts);
-	imx21_add_imx_fb(&mx21ads_fb_data);
 	imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
 	imx21_add_mxc_nand(&mx21ads_nand_board_info);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
+	imx21_add_imx_fb(&mx21ads_fb_data);
+
 	mx21ads_cs8900_resources[1].start =
 			gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
 	mx21ads_cs8900_resources[1].end =
@@ -321,10 +324,9 @@ static void __init mx21ads_timer_init(void)
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
 	.atag_offset = 0x100,
-	.map_io = mx21ads_map_io,
+	.map_io		= mx21_map_io,
 	.init_early = imx21_init_early,
 	.init_irq = mx21_init_irq,
-	.handle_irq = imx21_handle_irq,
 	.init_time	= mx21ads_timer_init,
 	.init_machine = mx21ads_board_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 13490c203050..ea1fa199c148 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -263,7 +263,6 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
 	.map_io = mx25_map_io,
 	.init_early = imx25_init_early,
 	.init_irq = mx25_init_irq,
-	.handle_irq = imx25_handle_irq,
 	.init_time	= mx25pdk_timer_init,
 	.init_machine = mx25pdk_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 25b3e4c9bc0a..435a5428a678 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -544,7 +544,6 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
 	.init_time	= mx27pdk_timer_init,
 	.init_machine = mx27pdk_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 9821b824dcaf..2f834ce8f39c 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -21,6 +21,10 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
+
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -195,14 +199,58 @@ static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
 static struct i2c_board_info mx27ads_i2c_devices[] = {
 };
 
-void lcd_power(int on)
+static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	if (on)
+	if (value)
 		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
 	else
 		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
+static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+	return 0;
+}
+
+#define MX27ADS_LCD_GPIO	(6 * 32)
+
+static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer =
+	REGULATOR_SUPPLY("lcd", "imx-fb.0");
+
+static struct regulator_init_data mx27ads_lcd_regulator_init_data = {
+	.constraints	= {
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+},
+	.consumer_supplies	= &mx27ads_lcd_regulator_consumer,
+	.num_consumer_supplies	= 1,
+};
+
+static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
+	.supply_name	= "LCD",
+	.microvolts	= 3300000,
+	.gpio		= MX27ADS_LCD_GPIO,
+	.init_data	= &mx27ads_lcd_regulator_init_data,
+};
+
+static void __init mx27ads_regulator_init(void)
+{
+	struct gpio_chip *vchip;
+
+	vchip = kzalloc(sizeof(*vchip), GFP_KERNEL);
+	vchip->owner		= THIS_MODULE;
+	vchip->label		= "LCD";
+	vchip->base		= MX27ADS_LCD_GPIO;
+	vchip->ngpio		= 1;
+	vchip->direction_output	= vgpio_dir_out;
+	vchip->set		= vgpio_set;
+	gpiochip_add(vchip);
+
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage",
+				      PLATFORM_DEVID_AUTO,
+				      &mx27ads_lcd_regulator_pdata,
+				      sizeof(mx27ads_lcd_regulator_pdata));
+}
+
 static struct imx_fb_videomode mx27ads_modes[] = {
 	{
 		.mode = {
@@ -239,8 +287,6 @@ static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
-
-	.lcd_power	= lcd_power,
 };
 
 static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
@@ -304,6 +350,7 @@ static void __init mx27ads_board_init(void)
 	i2c_register_board_info(1, mx27ads_i2c_devices,
 				ARRAY_SIZE(mx27ads_i2c_devices));
 	imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
+	mx27ads_regulator_init();
 	imx27_add_imx_fb(&mx27ads_fb_data);
 	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 	imx27_add_mxc_mmc(1, &sdhc2_pdata);
@@ -344,7 +391,6 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.map_io = mx27ads_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
 	.init_time	= mx27ads_timer_init,
 	.init_machine = mx27ads_board_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 50044a21b388..4217871a9653 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -775,7 +775,6 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
 	.init_time	= mx31_3ds_timer_init,
 	.init_machine = mx31_3ds_init,
 	.reserve = mx31_3ds_reserve,
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index daf8889125cc..d08c37c696f6 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -582,7 +582,6 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	.map_io = mx31ads_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31ads_init_irq,
-	.handle_irq = imx31_handle_irq,
 	.init_time	= mx31ads_timer_init,
 	.init_machine = mx31ads_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 832b1e2f964e..eee042fa2768 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -308,7 +308,6 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
 	.init_time	= mx31lilly_timer_init,
 	.init_machine = mx31lilly_board_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index bea07299b61a..fa15d0b6118d 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -291,7 +291,6 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	.map_io = mx31lite_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
 	.init_time	= mx31lite_timer_init,
 	.init_machine = mx31lite_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index b3738e616f19..08730f238449 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -128,27 +128,15 @@ static struct platform_device mx31moboard_flash = {
 	.num_resources = 1,
 };
 
-static int moboard_uart0_init(struct platform_device *pdev)
+static void __init moboard_uart0_init(void)
 {
-	int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
-	if (ret)
-		return ret;
-
-	ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
-	if (ret)
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack")) {
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
 		gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
-
-	return ret;
-}
-
-static void moboard_uart0_exit(struct platform_device *pdev)
-{
-	gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
+	}
 }
 
 static const struct imxuart_platform_data uart0_pdata __initconst = {
-	.init = moboard_uart0_init,
-	.exit = moboard_uart0_exit,
 };
 
 static const struct imxuart_platform_data uart4_pdata __initconst = {
@@ -543,6 +531,7 @@ static void __init mx31moboard_init(void)
 
 	imx31_add_imx2_wdt();
 
+	moboard_uart0_init();
 	imx31_add_imx_uart0(&uart0_pdata);
 	imx31_add_imx_uart4(&uart4_pdata);
 
@@ -611,7 +600,6 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
 	.init_time	= mx31moboard_timer_init,
 	.init_machine = mx31moboard_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index a42f4f07051f..4e8b184d773b 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -615,7 +615,6 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
-	.handle_irq = imx35_handle_irq,
 	.init_time	= mx35pdk_timer_init,
 	.init_machine = mx35_3ds_init,
 	.reserve = mx35_3ds_reserve,
diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
deleted file mode 100644
index f3d264a636fa..000000000000
--- a/arch/arm/mach-imx/mach-mx51_babbage.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx51.h"
-#include "hardware.h"
-#include "iomux-mx51.h"
-
-#define BABBAGE_USB_HUB_RESET	IMX_GPIO_NR(1, 7)
-#define BABBAGE_USBH1_STP	IMX_GPIO_NR(1, 27)
-#define BABBAGE_USB_PHY_RESET	IMX_GPIO_NR(2, 5)
-#define BABBAGE_FEC_PHY_RESET	IMX_GPIO_NR(2, 14)
-#define BABBAGE_POWER_KEY	IMX_GPIO_NR(2, 21)
-#define BABBAGE_ECSPI1_CS0	IMX_GPIO_NR(4, 24)
-#define BABBAGE_ECSPI1_CS1	IMX_GPIO_NR(4, 25)
-#define BABBAGE_SD2_CD		IMX_GPIO_NR(1, 6)
-#define BABBAGE_SD2_WP		IMX_GPIO_NR(1, 5)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET			0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN		(1 << 25)
-
-#define	MX51_USB_PLLDIV_12_MHZ		0x00
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-#define	MX51_USB_PLL_DIV_24_MHZ	0x02
-
-static struct gpio_keys_button babbage_buttons[] = {
-	{
-		.gpio		= BABBAGE_POWER_KEY,
-		.code		= BTN_0,
-		.desc		= "PWR",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static const struct gpio_keys_platform_data imx_button_data __initconst = {
-	.buttons	= babbage_buttons,
-	.nbuttons	= ARRAY_SIZE(babbage_buttons),
-};
-
-static iomux_v3_cfg_t mx51babbage_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-
-	/* UART3 */
-	MX51_PAD_EIM_D25__UART3_RXD,
-	MX51_PAD_EIM_D26__UART3_TXD,
-	MX51_PAD_EIM_D27__UART3_RTS,
-	MX51_PAD_EIM_D24__UART3_CTS,
-
-	/* I2C1 */
-	MX51_PAD_EIM_D16__I2C1_SDA,
-	MX51_PAD_EIM_D19__I2C1_SCL,
-
-	/* I2C2 */
-	MX51_PAD_KEY_COL4__I2C2_SCL,
-	MX51_PAD_KEY_COL5__I2C2_SDA,
-
-	/* HSI2C */
-	MX51_PAD_I2C1_CLK__I2C1_CLK,
-	MX51_PAD_I2C1_DAT__I2C1_DAT,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
-	/* USB HUB reset line*/
-	MX51_PAD_GPIO1_7__GPIO1_7,
-
-	/* USB PHY reset line */
-	MX51_PAD_EIM_D21__GPIO2_5,
-
-	/* FEC */
-	MX51_PAD_EIM_EB2__FEC_MDIO,
-	MX51_PAD_EIM_EB3__FEC_RDATA1,
-	MX51_PAD_EIM_CS2__FEC_RDATA2,
-	MX51_PAD_EIM_CS3__FEC_RDATA3,
-	MX51_PAD_EIM_CS4__FEC_RX_ER,
-	MX51_PAD_EIM_CS5__FEC_CRS,
-	MX51_PAD_NANDF_RB2__FEC_COL,
-	MX51_PAD_NANDF_RB3__FEC_RX_CLK,
-	MX51_PAD_NANDF_D9__FEC_RDATA0,
-	MX51_PAD_NANDF_D8__FEC_TDATA0,
-	MX51_PAD_NANDF_CS2__FEC_TX_ER,
-	MX51_PAD_NANDF_CS3__FEC_MDC,
-	MX51_PAD_NANDF_CS4__FEC_TDATA1,
-	MX51_PAD_NANDF_CS5__FEC_TDATA2,
-	MX51_PAD_NANDF_CS6__FEC_TDATA3,
-	MX51_PAD_NANDF_CS7__FEC_TX_EN,
-	MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
-
-	/* FEC PHY reset line */
-	MX51_PAD_EIM_A20__GPIO2_14,
-
-	/* SD 1 */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-	/* CD/WP from controller */
-	MX51_PAD_GPIO1_0__SD1_CD,
-	MX51_PAD_GPIO1_1__SD1_WP,
-
-	/* SD 2 */
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-	/* CD/WP gpio */
-	MX51_PAD_GPIO1_6__GPIO1_6,
-	MX51_PAD_GPIO1_5__GPIO1_5,
-
-	/* eCSPI1 */
-	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_CSPI1_SS0__GPIO4_24,
-	MX51_PAD_CSPI1_SS1__GPIO4_25,
-
-	/* Audio */
-	MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
-	MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
-	MX51_PAD_AUD3_BB_CK__AUD3_TXC,
-	MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = {
-	.bitrate = 400000,
-};
-
-static struct gpio mx51_babbage_usbh1_gpios[] = {
-	{ BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" },
-	{ BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" },
-};
-
-static int gpio_usbh1_active(void)
-{
-	iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
-	int ret;
-
-	/* Set USBH1_STP to GPIO and toggle it */
-	mxc_iomux_v3_setup_pad(usbh1stp_gpio);
-	ret = gpio_request_array(mx51_babbage_usbh1_gpios,
-					ARRAY_SIZE(mx51_babbage_usbh1_gpios));
-
-	if (ret) {
-		pr_debug("failed to get USBH1 pins: %d\n", ret);
-		return ret;
-	}
-
-	msleep(100);
-	gpio_set_value(BABBAGE_USBH1_STP, 1);
-	gpio_set_value(BABBAGE_USB_PHY_RESET, 1);
-	gpio_free_array(mx51_babbage_usbh1_gpios,
-					ARRAY_SIZE(mx51_babbage_usbh1_gpios));
-	return 0;
-}
-
-static inline void babbage_usbhub_reset(void)
-{
-	int ret;
-
-	/* Reset USB hub */
-	ret = gpio_request_one(BABBAGE_USB_HUB_RESET,
-					GPIOF_OUT_INIT_LOW, "GPIO1_7");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret);
-		return;
-	}
-
-	msleep(2);
-	/* Deassert reset */
-	gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
-}
-
-static inline void babbage_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
-					GPIOF_OUT_INIT_LOW, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	msleep(1);
-	gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
-}
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
-	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init		= initialize_otg_port,
-	.portsc	= MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
-	.init		= initialize_usbh1_port,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init babbage_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = true;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = false;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 1;
-}
-__setup("otg_mode=", babbage_otg_mode);
-
-static struct spi_board_info mx51_babbage_spi_board_info[] __initdata = {
-	{
-		.modalias = "mtd_dataflash",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_MODE_0,
-		.platform_data = NULL,
-	},
-};
-
-static int mx51_babbage_spi_cs[] = {
-	BABBAGE_ECSPI1_CS0,
-	BABBAGE_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
-	.chipselect     = mx51_babbage_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = {
-	.cd_type = ESDHC_CD_CONTROLLER,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
-	.cd_gpio = BABBAGE_SD2_CD,
-	.wp_gpio = BABBAGE_SD2_WP,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_GPIO,
-};
-
-void __init imx51_babbage_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
-					 ARRAY_SIZE(mx51babbage_pads));
-}
-
-/*
- * Board specific initialization.
- */
-static void __init mx51_babbage_init(void)
-{
-	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
-		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
-
-	imx51_soc_init();
-
-	imx51_babbage_common_init();
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_imx_uart(1, NULL);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	babbage_fec_reset();
-	imx51_add_fec(NULL);
-
-	/* Set the PAD settings for the pwr key. */
-	mxc_iomux_v3_setup_pad(power_key);
-	imx_add_gpio_keys(&imx_button_data);
-
-	imx51_add_imx_i2c(0, &babbage_i2c_data);
-	imx51_add_imx_i2c(1, &babbage_i2c_data);
-	imx51_add_hsi2c(&babbage_hsi2c_data);
-
-	if (otg_mode_host)
-		imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	else {
-		initialize_otg_port(NULL);
-		imx51_add_fsl_usb2_udc(&usb_pdata);
-	}
-
-	gpio_usbh1_active();
-	imx51_add_mxc_ehci_hs(1, &usbh1_config);
-	/* setback USBH1_STP to be function */
-	mxc_iomux_v3_setup_pad(usbh1stp);
-	babbage_usbhub_reset();
-
-	imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data);
-	imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data);
-
-	spi_register_board_info(mx51_babbage_spi_board_info,
-		ARRAY_SIZE(mx51_babbage_spi_board_info));
-	imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
-	imx51_add_imx2_wdt(0);
-}
-
-static void __init mx51_babbage_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
-	/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.init_time	= mx51_babbage_timer_init,
-	.init_machine = mx51_babbage_init,
-	.init_late	= imx51_init_late,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index c91894003da9..0b5d1ca31b9f 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -267,7 +267,6 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
 	.init_time	= mxt_td60_timer_init,
 	.init_machine = mxt_td60_board_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index bf3ac51d5aca..12212378c672 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -245,8 +245,7 @@ static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
 	int ret;
 
 	ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "imx-mmc-detect", data);
+			  IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
 	if (ret)
 		printk(KERN_ERR
 			"pca100: Failed to request irq for sd/mmc detection\n");
@@ -421,7 +420,6 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
 	.init_machine = pca100_init,
 	.init_time	= pca100_timer_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 639a3dfb0092..81b8affb9448 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -703,7 +703,6 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
 	.init_time	= pcm037_timer_init,
 	.init_machine = pcm037_init,
 	.init_late = pcm037_init_late,
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 592ddbe031ac..6c56fb5553c7 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -351,7 +351,6 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
 	.init_time	= pcm038_timer_init,
 	.init_machine = pcm038_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index ac504b67326b..c62b5d261345 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -400,7 +400,6 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
-	.handle_irq = imx35_handle_irq,
 	.init_time = pcm043_timer_init,
 	.init_machine = pcm043_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 22af27ed457e..a213e7b9cb1c 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -266,7 +266,6 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
 	.init_time	= qong_timer_init,
 	.init_machine = qong_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index b0fa10dd79fe..1f6bc3f7ae14 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -137,7 +137,6 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
-	.handle_irq = imx1_handle_irq,
 	.init_time	= scb9328_timer_init,
 	.init_machine = scb9328_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
index 2d8aef5a6efa..c44602758120 100644
--- a/arch/arm/mach-imx/mach-vf610.c
+++ b/arch/arm/mach-imx/mach-vf610.c
@@ -20,19 +20,14 @@ static void __init vf610_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static void __init vf610_init_irq(void)
-{
-	l2x0_of_init(0, ~0UL);
-	irqchip_init();
-}
-
 static const char *vf610_dt_compat[] __initconst = {
 	"fsl,vf610",
 	NULL,
 };
 
 DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)")
-	.init_irq	= vf610_init_irq,
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
 	.init_machine   = vf610_init_machine,
 	.dt_compat	= vf610_dt_compat,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 8825d1217d18..872b3c6ba408 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -310,7 +310,6 @@ MACHINE_START(VPR200, "VPR200")
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
-	.handle_irq = imx35_handle_irq,
 	.init_time = vpr200_timer_init,
 	.init_machine = vpr200_board_init,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index b08ab3ad4a6d..75d6a37e1ae4 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -36,6 +36,7 @@
 #define MXC_CPU_MX53		53
 #define MXC_CPU_IMX6SL		0x60
 #define MXC_CPU_IMX6DL		0x61
+#define MXC_CPU_IMX6SX		0x62
 #define MXC_CPU_IMX6Q		0x63
 
 #define IMX_CHIP_REVISION_1_0		0x10
@@ -163,6 +164,11 @@ static inline bool cpu_is_imx6dl(void)
 	return __mxc_cpu_type == MXC_CPU_IMX6DL;
 }
 
+static inline bool cpu_is_imx6sx(void)
+{
+	return __mxc_cpu_type == MXC_CPU_IMX6SX;
+}
+
 static inline bool cpu_is_imx6q(void)
 {
 	return __mxc_cpu_type == MXC_CPU_IMX6Q;
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
new file mode 100644
index 000000000000..9392a8f4ef24
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -0,0 +1,551 @@
+/*
+ * Copyright 2011-2014 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/genalloc.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/fncpy.h>
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/tlb.h>
+
+#include "common.h"
+#include "hardware.h"
+
+#define CCR				0x0
+#define BM_CCR_WB_COUNT			(0x7 << 16)
+#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
+#define BM_CCR_RBC_EN			(0x1 << 27)
+
+#define CLPCR				0x54
+#define BP_CLPCR_LPM			0
+#define BM_CLPCR_LPM			(0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
+#define BM_CLPCR_SBYOS			(0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
+#define BM_CLPCR_VSTBY			(0x1 << 8)
+#define BP_CLPCR_STBY_COUNT		9
+#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
+
+#define CGPR				0x64
+#define BM_CGPR_INT_MEM_CLK_LPM		(0x1 << 17)
+
+#define MX6Q_SUSPEND_OCRAM_SIZE		0x1000
+#define MX6_MAX_MMDC_IO_NUM		33
+
+static void __iomem *ccm_base;
+static void __iomem *suspend_ocram_base;
+static void (*imx6_suspend_in_ocram_fn)(void __iomem *ocram_vbase);
+
+/*
+ * suspend ocram space layout:
+ * ======================== high address ======================
+ *                              .
+ *                              .
+ *                              .
+ *                              ^
+ *                              ^
+ *                              ^
+ *                      imx6_suspend code
+ *              PM_INFO structure(imx6_cpu_pm_info)
+ * ======================== low address =======================
+ */
+
+struct imx6_pm_base {
+	phys_addr_t pbase;
+	void __iomem *vbase;
+};
+
+struct imx6_pm_socdata {
+	u32 cpu_type;
+	const char *mmdc_compat;
+	const char *src_compat;
+	const char *iomuxc_compat;
+	const char *gpc_compat;
+	const u32 mmdc_io_num;
+	const u32 *mmdc_io_offset;
+};
+
+static const u32 imx6q_mmdc_io_offset[] __initconst = {
+	0x5ac, 0x5b4, 0x528, 0x520, /* DQM0 ~ DQM3 */
+	0x514, 0x510, 0x5bc, 0x5c4, /* DQM4 ~ DQM7 */
+	0x56c, 0x578, 0x588, 0x594, /* CAS, RAS, SDCLK_0, SDCLK_1 */
+	0x5a8, 0x5b0, 0x524, 0x51c, /* SDQS0 ~ SDQS3 */
+	0x518, 0x50c, 0x5b8, 0x5c0, /* SDQS4 ~ SDQS7 */
+	0x784, 0x788, 0x794, 0x79c, /* GPR_B0DS ~ GPR_B3DS */
+	0x7a0, 0x7a4, 0x7a8, 0x748, /* GPR_B4DS ~ GPR_B7DS */
+	0x59c, 0x5a0, 0x750, 0x774, /* SODT0, SODT1, MODE_CTL, MODE */
+	0x74c,			    /* GPR_ADDS */
+};
+
+static const u32 imx6dl_mmdc_io_offset[] __initconst = {
+	0x470, 0x474, 0x478, 0x47c, /* DQM0 ~ DQM3 */
+	0x480, 0x484, 0x488, 0x48c, /* DQM4 ~ DQM7 */
+	0x464, 0x490, 0x4ac, 0x4b0, /* CAS, RAS, SDCLK_0, SDCLK_1 */
+	0x4bc, 0x4c0, 0x4c4, 0x4c8, /* DRAM_SDQS0 ~ DRAM_SDQS3 */
+	0x4cc, 0x4d0, 0x4d4, 0x4d8, /* DRAM_SDQS4 ~ DRAM_SDQS7 */
+	0x764, 0x770, 0x778, 0x77c, /* GPR_B0DS ~ GPR_B3DS */
+	0x780, 0x784, 0x78c, 0x748, /* GPR_B4DS ~ GPR_B7DS */
+	0x4b4, 0x4b8, 0x750, 0x760, /* SODT0, SODT1, MODE_CTL, MODE */
+	0x74c,			    /* GPR_ADDS */
+};
+
+static const u32 imx6sl_mmdc_io_offset[] __initconst = {
+	0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */
+	0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */
+	0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */
+	0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */
+	0x330, 0x334, 0x320,        /* SDCKE0, SDCKE1, RESET */
+};
+
+static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
+	.cpu_type = MXC_CPU_IMX6Q,
+	.mmdc_compat = "fsl,imx6q-mmdc",
+	.src_compat = "fsl,imx6q-src",
+	.iomuxc_compat = "fsl,imx6q-iomuxc",
+	.gpc_compat = "fsl,imx6q-gpc",
+	.mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset),
+	.mmdc_io_offset = imx6q_mmdc_io_offset,
+};
+
+static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
+	.cpu_type = MXC_CPU_IMX6DL,
+	.mmdc_compat = "fsl,imx6q-mmdc",
+	.src_compat = "fsl,imx6q-src",
+	.iomuxc_compat = "fsl,imx6dl-iomuxc",
+	.gpc_compat = "fsl,imx6q-gpc",
+	.mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset),
+	.mmdc_io_offset = imx6dl_mmdc_io_offset,
+};
+
+static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
+	.cpu_type = MXC_CPU_IMX6SL,
+	.mmdc_compat = "fsl,imx6sl-mmdc",
+	.src_compat = "fsl,imx6sl-src",
+	.iomuxc_compat = "fsl,imx6sl-iomuxc",
+	.gpc_compat = "fsl,imx6sl-gpc",
+	.mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset),
+	.mmdc_io_offset = imx6sl_mmdc_io_offset,
+};
+
+/*
+ * This structure is for passing necessary data for low level ocram
+ * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
+ * definition is changed, the offset definition in
+ * arch/arm/mach-imx/suspend-imx6.S must be also changed accordingly,
+ * otherwise, the suspend to ocram function will be broken!
+ */
+struct imx6_cpu_pm_info {
+	phys_addr_t pbase; /* The physical address of pm_info. */
+	phys_addr_t resume_addr; /* The physical resume address for asm code */
+	u32 cpu_type;
+	u32 pm_info_size; /* Size of pm_info. */
+	struct imx6_pm_base mmdc_base;
+	struct imx6_pm_base src_base;
+	struct imx6_pm_base iomuxc_base;
+	struct imx6_pm_base ccm_base;
+	struct imx6_pm_base gpc_base;
+	struct imx6_pm_base l2_base;
+	u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */
+	u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
+} __aligned(8);
+
+void imx6q_set_int_mem_clk_lpm(void)
+{
+	u32 val = readl_relaxed(ccm_base + CGPR);
+
+	val |= BM_CGPR_INT_MEM_CLK_LPM;
+	writel_relaxed(val, ccm_base + CGPR);
+}
+
+static void imx6q_enable_rbc(bool enable)
+{
+	u32 val;
+
+	/*
+	 * need to mask all interrupts in GPC before
+	 * operating RBC configurations
+	 */
+	imx_gpc_mask_all();
+
+	/* configure RBC enable bit */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_EN;
+	val |= enable ? BM_CCR_RBC_EN : 0;
+	writel_relaxed(val, ccm_base + CCR);
+
+	/* configure RBC count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_BYPASS_COUNT;
+	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
+	writel(val, ccm_base + CCR);
+
+	/*
+	 * need to delay at least 2 cycles of CKIL(32K)
+	 * due to hardware design requirement, which is
+	 * ~61us, here we use 65us for safe
+	 */
+	udelay(65);
+
+	/* restore GPC interrupt mask settings */
+	imx_gpc_restore_all();
+}
+
+static void imx6q_enable_wb(bool enable)
+{
+	u32 val;
+
+	/* configure well bias enable bit */
+	val = readl_relaxed(ccm_base + CLPCR);
+	val &= ~BM_CLPCR_WB_PER_AT_LPM;
+	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
+	writel_relaxed(val, ccm_base + CLPCR);
+
+	/* configure well bias count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_WB_COUNT;
+	val |= enable ? BM_CCR_WB_COUNT : 0;
+	writel_relaxed(val, ccm_base + CCR);
+}
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+	struct irq_data *iomuxc_irq_data = irq_get_irq_data(32);
+	u32 val = readl_relaxed(ccm_base + CLPCR);
+
+	val &= ~BM_CLPCR_LPM;
+	switch (mode) {
+	case WAIT_CLOCKED:
+		break;
+	case WAIT_UNCLOCKED:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
+		break;
+	case STOP_POWER_ON:
+		val |= 0x2 << BP_CLPCR_LPM;
+		break;
+	case WAIT_UNCLOCKED_POWER_OFF:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val &= ~BM_CLPCR_VSTBY;
+		val &= ~BM_CLPCR_SBYOS;
+		break;
+	case STOP_POWER_OFF:
+		val |= 0x2 << BP_CLPCR_LPM;
+		val |= 0x3 << BP_CLPCR_STBY_COUNT;
+		val |= BM_CLPCR_VSTBY;
+		val |= BM_CLPCR_SBYOS;
+		if (cpu_is_imx6sl()) {
+			val |= BM_CLPCR_BYPASS_PMIC_READY;
+			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
+		} else {
+			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * ERR007265: CCM: When improper low-power sequence is used,
+	 * the SoC enters low power mode before the ARM core executes WFI.
+	 *
+	 * Software workaround:
+	 * 1) Software should trigger IRQ #32 (IOMUX) to be always pending
+	 *    by setting IOMUX_GPR1_GINT.
+	 * 2) Software should then unmask IRQ #32 in GPC before setting CCM
+	 *    Low-Power mode.
+	 * 3) Software should mask IRQ #32 right after CCM Low-Power mode
+	 *    is set (set bits 0-1 of CCM_CLPCR).
+	 */
+	imx_gpc_irq_unmask(iomuxc_irq_data);
+	writel_relaxed(val, ccm_base + CLPCR);
+	imx_gpc_irq_mask(iomuxc_irq_data);
+
+	return 0;
+}
+
+static int imx6q_suspend_finish(unsigned long val)
+{
+	if (!imx6_suspend_in_ocram_fn) {
+		cpu_do_idle();
+	} else {
+		/*
+		 * call low level suspend function in ocram,
+		 * as we need to float DDR IO.
+		 */
+		local_flush_tlb_all();
+		imx6_suspend_in_ocram_fn(suspend_ocram_base);
+	}
+
+	return 0;
+}
+
+static int imx6q_pm_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		imx6q_set_lpm(STOP_POWER_OFF);
+		imx6q_enable_wb(true);
+		/*
+		 * For suspend into ocram, asm code already take care of
+		 * RBC setting, so we do NOT need to do that here.
+		 */
+		if (!imx6_suspend_in_ocram_fn)
+			imx6q_enable_rbc(true);
+		imx_gpc_pre_suspend();
+		imx_anatop_pre_suspend();
+		imx_set_cpu_jump(0, v7_cpu_resume);
+		/* Zzz ... */
+		cpu_suspend(0, imx6q_suspend_finish);
+		if (cpu_is_imx6q() || cpu_is_imx6dl())
+			imx_smp_prepare();
+		imx_anatop_post_resume();
+		imx_gpc_post_resume();
+		imx6q_enable_rbc(false);
+		imx6q_enable_wb(false);
+		imx6q_set_lpm(WAIT_CLOCKED);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct platform_suspend_ops imx6q_pm_ops = {
+	.enter = imx6q_pm_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+void __init imx6q_pm_set_ccm_base(void __iomem *base)
+{
+	ccm_base = base;
+}
+
+static int __init imx6_pm_get_base(struct imx6_pm_base *base,
+				const char *compat)
+{
+	struct device_node *node;
+	struct resource res;
+	int ret = 0;
+
+	node = of_find_compatible_node(NULL, NULL, compat);
+	if (!node) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		goto put_node;
+
+	base->pbase = res.start;
+	base->vbase = ioremap(res.start, resource_size(&res));
+	if (!base->vbase)
+		ret = -ENOMEM;
+
+put_node:
+	of_node_put(node);
+out:
+	return ret;
+}
+
+static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
+{
+	phys_addr_t ocram_pbase;
+	struct device_node *node;
+	struct platform_device *pdev;
+	struct imx6_cpu_pm_info *pm_info;
+	struct gen_pool *ocram_pool;
+	unsigned long ocram_base;
+	int i, ret = 0;
+	const u32 *mmdc_offset_array;
+
+	suspend_set_ops(&imx6q_pm_ops);
+
+	if (!socdata) {
+		pr_warn("%s: invalid argument!\n", __func__);
+		return -EINVAL;
+	}
+
+	node = of_find_compatible_node(NULL, NULL, "mmio-sram");
+	if (!node) {
+		pr_warn("%s: failed to find ocram node!\n", __func__);
+		return -ENODEV;
+	}
+
+	pdev = of_find_device_by_node(node);
+	if (!pdev) {
+		pr_warn("%s: failed to find ocram device!\n", __func__);
+		ret = -ENODEV;
+		goto put_node;
+	}
+
+	ocram_pool = dev_get_gen_pool(&pdev->dev);
+	if (!ocram_pool) {
+		pr_warn("%s: ocram pool unavailable!\n", __func__);
+		ret = -ENODEV;
+		goto put_node;
+	}
+
+	ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE);
+	if (!ocram_base) {
+		pr_warn("%s: unable to alloc ocram!\n", __func__);
+		ret = -ENOMEM;
+		goto put_node;
+	}
+
+	ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
+
+	suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
+		MX6Q_SUSPEND_OCRAM_SIZE, false);
+
+	pm_info = suspend_ocram_base;
+	pm_info->pbase = ocram_pbase;
+	pm_info->resume_addr = virt_to_phys(v7_cpu_resume);
+	pm_info->pm_info_size = sizeof(*pm_info);
+
+	/*
+	 * ccm physical address is not used by asm code currently,
+	 * so get ccm virtual address directly, as we already have
+	 * it from ccm driver.
+	 */
+	pm_info->ccm_base.vbase = ccm_base;
+
+	ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat);
+	if (ret) {
+		pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret);
+		goto put_node;
+	}
+
+	ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat);
+	if (ret) {
+		pr_warn("%s: failed to get src base %d!\n", __func__, ret);
+		goto src_map_failed;
+	}
+
+	ret = imx6_pm_get_base(&pm_info->iomuxc_base, socdata->iomuxc_compat);
+	if (ret) {
+		pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret);
+		goto iomuxc_map_failed;
+	}
+
+	ret = imx6_pm_get_base(&pm_info->gpc_base, socdata->gpc_compat);
+	if (ret) {
+		pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
+		goto gpc_map_failed;
+	}
+
+	ret = imx6_pm_get_base(&pm_info->l2_base, "arm,pl310-cache");
+	if (ret) {
+		pr_warn("%s: failed to get pl310-cache base %d!\n",
+			__func__, ret);
+		goto pl310_cache_map_failed;
+	}
+
+	pm_info->cpu_type = socdata->cpu_type;
+	pm_info->mmdc_io_num = socdata->mmdc_io_num;
+	mmdc_offset_array = socdata->mmdc_io_offset;
+
+	for (i = 0; i < pm_info->mmdc_io_num; i++) {
+		pm_info->mmdc_io_val[i][0] =
+			mmdc_offset_array[i];
+		pm_info->mmdc_io_val[i][1] =
+			readl_relaxed(pm_info->iomuxc_base.vbase +
+			mmdc_offset_array[i]);
+	}
+
+	imx6_suspend_in_ocram_fn = fncpy(
+		suspend_ocram_base + sizeof(*pm_info),
+		&imx6_suspend,
+		MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
+
+	goto put_node;
+
+pl310_cache_map_failed:
+	iounmap(&pm_info->gpc_base.vbase);
+gpc_map_failed:
+	iounmap(&pm_info->iomuxc_base.vbase);
+iomuxc_map_failed:
+	iounmap(&pm_info->src_base.vbase);
+src_map_failed:
+	iounmap(&pm_info->mmdc_base.vbase);
+put_node:
+	of_node_put(node);
+
+	return ret;
+}
+
+static void __init imx6_pm_common_init(const struct imx6_pm_socdata
+					*socdata)
+{
+	struct regmap *gpr;
+	int ret;
+
+	WARN_ON(!ccm_base);
+
+	if (IS_ENABLED(CONFIG_SUSPEND)) {
+		ret = imx6q_suspend_init(socdata);
+		if (ret)
+			pr_warn("%s: No DDR LPM support with suspend %d!\n",
+				__func__, ret);
+	}
+
+	/*
+	 * This is for SW workaround step #1 of ERR007265, see comments
+	 * in imx6q_set_lpm for details of this errata.
+	 * Force IOMUXC irq pending, so that the interrupt to GPC can be
+	 * used to deassert dsm_request signal when the signal gets
+	 * asserted unexpectedly.
+	 */
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (!IS_ERR(gpr))
+		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
+				   IMX6Q_GPR1_GINT);
+}
+
+void __init imx6q_pm_init(void)
+{
+	imx6_pm_common_init(&imx6q_pm_data);
+}
+
+void __init imx6dl_pm_init(void)
+{
+	imx6_pm_common_init(&imx6dl_pm_data);
+}
+
+void __init imx6sl_pm_init(void)
+{
+	imx6_pm_common_init(&imx6sl_pm_data);
+}
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
deleted file mode 100644
index 7a9b98589db7..000000000000
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Copyright 2011-2013 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/regmap.h>
-#include <linux/suspend.h>
-#include <asm/cacheflush.h>
-#include <asm/proc-fns.h>
-#include <asm/suspend.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "common.h"
-#include "hardware.h"
-
-#define CCR				0x0
-#define BM_CCR_WB_COUNT			(0x7 << 16)
-#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
-#define BM_CCR_RBC_EN			(0x1 << 27)
-
-#define CLPCR				0x54
-#define BP_CLPCR_LPM			0
-#define BM_CLPCR_LPM			(0x3 << 0)
-#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
-#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
-#define BM_CLPCR_SBYOS			(0x1 << 6)
-#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
-#define BM_CLPCR_VSTBY			(0x1 << 8)
-#define BP_CLPCR_STBY_COUNT		9
-#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
-#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
-#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
-#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
-#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
-#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
-#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
-#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
-#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
-#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
-#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
-#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
-
-#define CGPR				0x64
-#define BM_CGPR_CHICKEN_BIT		(0x1 << 17)
-
-static void __iomem *ccm_base;
-
-void imx6q_set_chicken_bit(void)
-{
-	u32 val = readl_relaxed(ccm_base + CGPR);
-
-	val |= BM_CGPR_CHICKEN_BIT;
-	writel_relaxed(val, ccm_base + CGPR);
-}
-
-static void imx6q_enable_rbc(bool enable)
-{
-	u32 val;
-
-	/*
-	 * need to mask all interrupts in GPC before
-	 * operating RBC configurations
-	 */
-	imx_gpc_mask_all();
-
-	/* configure RBC enable bit */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_RBC_EN;
-	val |= enable ? BM_CCR_RBC_EN : 0;
-	writel_relaxed(val, ccm_base + CCR);
-
-	/* configure RBC count */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_RBC_BYPASS_COUNT;
-	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
-	writel(val, ccm_base + CCR);
-
-	/*
-	 * need to delay at least 2 cycles of CKIL(32K)
-	 * due to hardware design requirement, which is
-	 * ~61us, here we use 65us for safe
-	 */
-	udelay(65);
-
-	/* restore GPC interrupt mask settings */
-	imx_gpc_restore_all();
-}
-
-static void imx6q_enable_wb(bool enable)
-{
-	u32 val;
-
-	/* configure well bias enable bit */
-	val = readl_relaxed(ccm_base + CLPCR);
-	val &= ~BM_CLPCR_WB_PER_AT_LPM;
-	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
-	writel_relaxed(val, ccm_base + CLPCR);
-
-	/* configure well bias count */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_WB_COUNT;
-	val |= enable ? BM_CCR_WB_COUNT : 0;
-	writel_relaxed(val, ccm_base + CCR);
-}
-
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
-{
-	struct irq_desc *iomuxc_irq_desc;
-	u32 val = readl_relaxed(ccm_base + CLPCR);
-
-	val &= ~BM_CLPCR_LPM;
-	switch (mode) {
-	case WAIT_CLOCKED:
-		break;
-	case WAIT_UNCLOCKED:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
-		break;
-	case STOP_POWER_ON:
-		val |= 0x2 << BP_CLPCR_LPM;
-		break;
-	case WAIT_UNCLOCKED_POWER_OFF:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val &= ~BM_CLPCR_VSTBY;
-		val &= ~BM_CLPCR_SBYOS;
-		break;
-	case STOP_POWER_OFF:
-		val |= 0x2 << BP_CLPCR_LPM;
-		val |= 0x3 << BP_CLPCR_STBY_COUNT;
-		val |= BM_CLPCR_VSTBY;
-		val |= BM_CLPCR_SBYOS;
-		if (cpu_is_imx6sl()) {
-			val |= BM_CLPCR_BYPASS_PMIC_READY;
-			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
-		} else {
-			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
-		}
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/*
-	 * ERR007265: CCM: When improper low-power sequence is used,
-	 * the SoC enters low power mode before the ARM core executes WFI.
-	 *
-	 * Software workaround:
-	 * 1) Software should trigger IRQ #32 (IOMUX) to be always pending
-	 *    by setting IOMUX_GPR1_GINT.
-	 * 2) Software should then unmask IRQ #32 in GPC before setting CCM
-	 *    Low-Power mode.
-	 * 3) Software should mask IRQ #32 right after CCM Low-Power mode
-	 *    is set (set bits 0-1 of CCM_CLPCR).
-	 */
-	iomuxc_irq_desc = irq_to_desc(32);
-	imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data);
-	writel_relaxed(val, ccm_base + CLPCR);
-	imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data);
-
-	return 0;
-}
-
-static int imx6q_suspend_finish(unsigned long val)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static int imx6q_pm_enter(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_MEM:
-		imx6q_set_lpm(STOP_POWER_OFF);
-		imx6q_enable_wb(true);
-		imx6q_enable_rbc(true);
-		imx_gpc_pre_suspend();
-		imx_anatop_pre_suspend();
-		imx_set_cpu_jump(0, v7_cpu_resume);
-		/* Zzz ... */
-		cpu_suspend(0, imx6q_suspend_finish);
-		if (cpu_is_imx6q() || cpu_is_imx6dl())
-			imx_smp_prepare();
-		imx_anatop_post_resume();
-		imx_gpc_post_resume();
-		imx6q_enable_rbc(false);
-		imx6q_enable_wb(false);
-		imx6q_set_lpm(WAIT_CLOCKED);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static const struct platform_suspend_ops imx6q_pm_ops = {
-	.enter = imx6q_pm_enter,
-	.valid = suspend_valid_only_mem,
-};
-
-void __init imx6q_pm_set_ccm_base(void __iomem *base)
-{
-	ccm_base = base;
-}
-
-void __init imx6q_pm_init(void)
-{
-	struct regmap *gpr;
-
-	WARN_ON(!ccm_base);
-
-	/*
-	 * This is for SW workaround step #1 of ERR007265, see comments
-	 * in imx6q_set_lpm for details of this errata.
-	 * Force IOMUXC irq pending, so that the interrupt to GPC can be
-	 * used to deassert dsm_request signal when the signal gets
-	 * asserted unexpectedly.
-	 */
-	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
-	if (!IS_ERR(gpr))
-		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
-				   IMX6Q_GPR1_GINT);
-
-
-	suspend_set_ops(&imx6q_pm_ops);
-}
diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
new file mode 100644
index 000000000000..fe123b079c05
--- /dev/null
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -0,0 +1,343 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "hardware.h"
+
+/*
+ * ==================== low level suspend ====================
+ *
+ * Better to follow below rules to use ARM registers:
+ * r0: pm_info structure address;
+ * r1 ~ r4: for saving pm_info members;
+ * r5 ~ r10: free registers;
+ * r11: io base address.
+ *
+ * suspend ocram space layout:
+ * ======================== high address ======================
+ *                              .
+ *                              .
+ *                              .
+ *                              ^
+ *                              ^
+ *                              ^
+ *                      imx6_suspend code
+ *              PM_INFO structure(imx6_cpu_pm_info)
+ * ======================== low address =======================
+ */
+
+/*
+ * Below offsets are based on struct imx6_cpu_pm_info
+ * which defined in arch/arm/mach-imx/pm-imx6q.c, this
+ * structure contains necessary pm info for low level
+ * suspend related code.
+ */
+#define PM_INFO_PBASE_OFFSET			0x0
+#define PM_INFO_RESUME_ADDR_OFFSET		0x4
+#define PM_INFO_CPU_TYPE_OFFSET			0x8
+#define PM_INFO_PM_INFO_SIZE_OFFSET		0xC
+#define PM_INFO_MX6Q_MMDC_P_OFFSET		0x10
+#define PM_INFO_MX6Q_MMDC_V_OFFSET		0x14
+#define PM_INFO_MX6Q_SRC_P_OFFSET		0x18
+#define PM_INFO_MX6Q_SRC_V_OFFSET		0x1C
+#define PM_INFO_MX6Q_IOMUXC_P_OFFSET		0x20
+#define PM_INFO_MX6Q_IOMUXC_V_OFFSET		0x24
+#define PM_INFO_MX6Q_CCM_P_OFFSET		0x28
+#define PM_INFO_MX6Q_CCM_V_OFFSET		0x2C
+#define PM_INFO_MX6Q_GPC_P_OFFSET		0x30
+#define PM_INFO_MX6Q_GPC_V_OFFSET		0x34
+#define PM_INFO_MX6Q_L2_P_OFFSET		0x38
+#define PM_INFO_MX6Q_L2_V_OFFSET		0x3C
+#define PM_INFO_MMDC_IO_NUM_OFFSET		0x40
+#define PM_INFO_MMDC_IO_VAL_OFFSET		0x44
+
+#define MX6Q_SRC_GPR1	0x20
+#define MX6Q_SRC_GPR2	0x24
+#define MX6Q_MMDC_MAPSR	0x404
+#define MX6Q_MMDC_MPDGCTRL0	0x83c
+#define MX6Q_GPC_IMR1	0x08
+#define MX6Q_GPC_IMR2	0x0c
+#define MX6Q_GPC_IMR3	0x10
+#define MX6Q_GPC_IMR4	0x14
+#define MX6Q_CCM_CCR	0x0
+
+	.align 3
+
+	.macro  sync_l2_cache
+
+	/* sync L2 cache to drain L2's buffers to DRAM. */
+#ifdef CONFIG_CACHE_L2X0
+	ldr	r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET]
+	mov	r6, #0x0
+	str	r6, [r11, #L2X0_CACHE_SYNC]
+1:
+	ldr	r6, [r11, #L2X0_CACHE_SYNC]
+	ands	r6, r6, #0x1
+	bne	1b
+#endif
+
+	.endm
+
+	.macro	resume_mmdc
+
+	/* restore MMDC IO */
+	cmp	r5, #0x0
+	ldreq	r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
+	ldrne	r11, [r0, #PM_INFO_MX6Q_IOMUXC_P_OFFSET]
+
+	ldr	r6, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
+	ldr	r7, =PM_INFO_MMDC_IO_VAL_OFFSET
+	add	r7, r7, r0
+1:
+	ldr	r8, [r7], #0x4
+	ldr	r9, [r7], #0x4
+	str	r9, [r11, r8]
+	subs	r6, r6, #0x1
+	bne	1b
+
+	cmp	r5, #0x0
+	ldreq	r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
+	ldrne	r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET]
+
+	cmp 	r3, #MXC_CPU_IMX6SL
+	bne	4f
+
+	/* reset read FIFO, RST_RD_FIFO */
+	ldr	r7, =MX6Q_MMDC_MPDGCTRL0
+	ldr	r6, [r11, r7]
+	orr     r6, r6, #(1 << 31)
+	str	r6, [r11, r7]
+2:
+	ldr	r6, [r11, r7]
+	ands	r6, r6, #(1 << 31)
+	bne	2b
+
+	/* reset FIFO a second time */
+	ldr	r6, [r11, r7]
+	orr     r6, r6, #(1 << 31)
+	str	r6, [r11, r7]
+3:
+	ldr	r6, [r11, r7]
+	ands	r6, r6, #(1 << 31)
+	bne	3b
+4:
+	/* let DDR out of self-refresh */
+	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
+	bic	r7, r7, #(1 << 21)
+	str	r7, [r11, #MX6Q_MMDC_MAPSR]
+5:
+	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
+	ands	r7, r7, #(1 << 25)
+	bne	5b
+
+	/* enable DDR auto power saving */
+	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
+	bic	r7, r7, #0x1
+	str	r7, [r11, #MX6Q_MMDC_MAPSR]
+
+	.endm
+
+ENTRY(imx6_suspend)
+	ldr	r1, [r0, #PM_INFO_PBASE_OFFSET]
+	ldr	r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+	ldr	r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
+	ldr	r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
+
+	/*
+	 * counting the resume address in iram
+	 * to set it in SRC register.
+	 */
+	ldr	r6, =imx6_suspend
+	ldr	r7, =resume
+	sub	r7, r7, r6
+	add	r8, r1, r4
+	add	r9, r8, r7
+
+	/*
+	 * make sure TLB contain the addr we want,
+	 * as we will access them after MMDC IO floated.
+	 */
+
+	ldr	r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET]
+	ldr	r6, [r11, #0x0]
+	ldr	r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
+	ldr	r6, [r11, #0x0]
+
+	/* use r11 to store the IO address */
+	ldr	r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET]
+	/* store physical resume addr and pm_info address. */
+	str	r9, [r11, #MX6Q_SRC_GPR1]
+	str	r1, [r11, #MX6Q_SRC_GPR2]
+
+	/* need to sync L2 cache before DSM. */
+	sync_l2_cache
+
+	ldr	r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
+	/*
+	 * put DDR explicitly into self-refresh and
+	 * disable automatic power savings.
+	 */
+	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
+	orr	r7, r7, #0x1
+	str	r7, [r11, #MX6Q_MMDC_MAPSR]
+
+	/* make the DDR explicitly enter self-refresh. */
+	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
+	orr	r7, r7, #(1 << 21)
+	str	r7, [r11, #MX6Q_MMDC_MAPSR]
+
+poll_dvfs_set:
+	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
+	ands	r7, r7, #(1 << 25)
+	beq	poll_dvfs_set
+
+	ldr	r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
+	ldr	r6, =0x0
+	ldr	r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
+	ldr	r8, =PM_INFO_MMDC_IO_VAL_OFFSET
+	add	r8, r8, r0
+	/* i.MX6SL's last 3 IOs need special setting */
+	cmp	r3, #MXC_CPU_IMX6SL
+	subeq	r7, r7, #0x3
+set_mmdc_io_lpm:
+	ldr	r9, [r8], #0x8
+	str	r6, [r11, r9]
+	subs	r7, r7, #0x1
+	bne	set_mmdc_io_lpm
+
+	cmp 	r3, #MXC_CPU_IMX6SL
+	bne	set_mmdc_io_lpm_done
+	ldr	r6, =0x1000
+	ldr	r9, [r8], #0x8
+	str	r6, [r11, r9]
+	ldr	r9, [r8], #0x8
+	str	r6, [r11, r9]
+	ldr	r6, =0x80000
+	ldr	r9, [r8]
+	str	r6, [r11, r9]
+set_mmdc_io_lpm_done:
+
+	/*
+	 * mask all GPC interrupts before
+	 * enabling the RBC counters to
+	 * avoid the counter starting too
+	 * early if an interupt is already
+	 * pending.
+	 */
+	ldr	r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
+	ldr	r6, [r11, #MX6Q_GPC_IMR1]
+	ldr	r7, [r11, #MX6Q_GPC_IMR2]
+	ldr	r8, [r11, #MX6Q_GPC_IMR3]
+	ldr	r9, [r11, #MX6Q_GPC_IMR4]
+
+	ldr	r10, =0xffffffff
+	str	r10, [r11, #MX6Q_GPC_IMR1]
+	str	r10, [r11, #MX6Q_GPC_IMR2]
+	str	r10, [r11, #MX6Q_GPC_IMR3]
+	str	r10, [r11, #MX6Q_GPC_IMR4]
+
+	/*
+	 * enable the RBC bypass counter here
+	 * to hold off the interrupts. RBC counter
+	 * = 32 (1ms), Minimum RBC delay should be
+	 * 400us for the analog LDOs to power down.
+	 */
+	ldr	r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET]
+	ldr	r10, [r11, #MX6Q_CCM_CCR]
+	bic	r10, r10, #(0x3f << 21)
+	orr	r10, r10, #(0x20 << 21)
+	str	r10, [r11, #MX6Q_CCM_CCR]
+
+	/* enable the counter. */
+	ldr	r10, [r11, #MX6Q_CCM_CCR]
+	orr	r10, r10, #(0x1 << 27)
+	str	r10, [r11, #MX6Q_CCM_CCR]
+
+	/* unmask all the GPC interrupts. */
+	ldr	r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
+	str	r6, [r11, #MX6Q_GPC_IMR1]
+	str	r7, [r11, #MX6Q_GPC_IMR2]
+	str	r8, [r11, #MX6Q_GPC_IMR3]
+	str	r9, [r11, #MX6Q_GPC_IMR4]
+
+	/*
+	 * now delay for a short while (3usec)
+	 * ARM is at 1GHz at this point
+	 * so a short loop should be enough.
+	 * this delay is required to ensure that
+	 * the RBC counter can start counting in
+	 * case an interrupt is already pending
+	 * or in case an interrupt arrives just
+	 * as ARM is about to assert DSM_request.
+	 */
+	ldr	r6, =2000
+rbc_loop:
+	subs	r6, r6, #0x1
+	bne	rbc_loop
+
+	/* Zzz, enter stop mode */
+	wfi
+	nop
+	nop
+	nop
+	nop
+
+	/*
+	 * run to here means there is pending
+	 * wakeup source, system should auto
+	 * resume, we need to restore MMDC IO first
+	 */
+	mov	r5, #0x0
+	resume_mmdc
+
+	/* return to suspend finish */
+	mov	pc, lr
+
+resume:
+	/* invalidate L1 I-cache first */
+	mov     r6, #0x0
+	mcr     p15, 0, r6, c7, c5, 0
+	mcr     p15, 0, r6, c7, c5, 6
+	/* enable the Icache and branch prediction */
+	mov     r6, #0x1800
+	mcr     p15, 0, r6, c1, c0, 0
+	isb
+
+	/* get physical resume address from pm_info. */
+	ldr	lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+	/* clear core0's entry and parameter */
+	ldr	r11, [r0, #PM_INFO_MX6Q_SRC_P_OFFSET]
+	mov	r7, #0x0
+	str	r7, [r11, #MX6Q_SRC_GPR1]
+	str	r7, [r11, #MX6Q_SRC_GPR2]
+
+	ldr	r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
+	mov	r5, #0x1
+	resume_mmdc
+
+	mov	pc, lr
+ENDPROC(imx6_suspend)
+
+/*
+ * The following code must assume it is running from physical address
+ * where absolute virtual addresses to the data section have to be
+ * turned into relative ones.
+ */
+
+ENTRY(v7_cpu_resume)
+	bl	v7_invalidate_l1
+#ifdef CONFIG_CACHE_L2X0
+	bl	l2c310_early_resume
+#endif
+	b	cpu_resume
+ENDPROC(v7_cpu_resume)
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index 5e3027d3692f..3b0733edb68c 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -124,7 +124,7 @@ void __init imx_init_l2cache(void)
 	}
 
 	/* Configure the L2 PREFETCH and POWER registers */
-	val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
+	val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL);
 	val |= 0x70800000;
 	/*
 	 * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
@@ -137,14 +137,12 @@ void __init imx_init_l2cache(void)
 	 */
 	if (cpu_is_imx6q())
 		val &= ~(1 << 30 | 1 << 23);
-	writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
-	val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
-	writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);
+	writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL);
 
 	iounmap(l2x0_base);
 	of_node_put(np);
 
 out:
-	l2x0_of_init(0, ~0UL);
+	l2x0_of_init(0, ~0);
 }
 #endif
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index 1a3a5f615770..bed081e58262 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -25,8 +25,12 @@
 #include <linux/irq.h>
 #include <linux/clockchips.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/mach/time.h>
 
@@ -116,11 +120,22 @@ static u64 notrace mxc_read_sched_clock(void)
 	return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
 }
 
+static struct delay_timer imx_delay_timer;
+
+static unsigned long imx_read_current_timer(void)
+{
+	return __raw_readl(sched_clock_reg);
+}
+
 static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 	void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN);
 
+	imx_delay_timer.read_current_timer = &imx_read_current_timer;
+	imx_delay_timer.freq = c;
+	register_current_timer_delay(&imx_delay_timer);
+
 	sched_clock_reg = reg;
 
 	sched_clock_register(mxc_read_sched_clock, 32, c);
@@ -316,3 +331,15 @@ void __init mxc_timer_init(void __iomem *base, int irq)
 	/* Make irqs happen */
 	setup_irq(irq, &mxc_timer_irq);
 }
+
+void __init mxc_timer_init_dt(struct device_node *np)
+{
+	void __iomem *base;
+	int irq;
+
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	irq = irq_of_parse_and_map(np, 0);
+
+	mxc_timer_init(base, irq);
+}
diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c
index 8183178d5aa3..7828af4b2022 100644
--- a/arch/arm/mach-imx/tzic.c
+++ b/arch/arm/mach-imx/tzic.c
@@ -125,7 +125,7 @@ static __init void tzic_init_gc(int idx, unsigned int irq_start)
 	irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
 }
 
-asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
+static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
 {
 	u32 stat;
 	int i, irqofs, handled;
@@ -189,6 +189,8 @@ void __init tzic_init_irq(void __iomem *irqbase)
 	for (i = 0; i < 4; i++, irq_base += 32)
 		tzic_init_gc(i, irq_base);
 
+	set_handle_irq(tzic_handle_irq);
+
 #ifdef CONFIG_FIQ
 	/* Initialize FIQ */
 	init_FIQ(FIQ_START);
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index abeff25532ab..ba43321001d8 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -6,8 +6,8 @@ config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select CLKSRC_MMIO
 	select MIGHT_HAVE_PCI
-	select SERIAL_AMBA_PL010
-	select SERIAL_AMBA_PL010_CONSOLE
+	select SERIAL_AMBA_PL010 if TTY
+	select SERIAL_AMBA_PL010_CONSOLE if TTY
 	select SOC_BUS
 	help
 	  Include support for the ARM(R) Integrator/AP and
@@ -18,8 +18,8 @@ config ARCH_INTEGRATOR_CP
 	select ARCH_CINTEGRATOR
 	select ARM_TIMER_SP804
 	select PLAT_VERSATILE_CLCD
-	select SERIAL_AMBA_PL011
-	select SERIAL_AMBA_PL011_CONSOLE
+	select SERIAL_AMBA_PL011 if TTY
+	select SERIAL_AMBA_PL011_CONSOLE if TTY
 	select SOC_BUS
 	help
 	  Include support for the ARM(R) Integrator CP platform.
@@ -30,6 +30,9 @@ config ARCH_CINTEGRATOR
 config INTEGRATOR_IMPD1
 	tristate "Include support for Integrator/IM-PD1"
 	depends on ARCH_INTEGRATOR_AP
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_VIC
+	select GPIO_PL061 if GPIOLIB
 	help
 	  The IM-PD1 is an add-on logic module for the Integrator which
 	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 00ddf20ed91b..e3f3aca43efb 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -25,13 +25,11 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/time.h>
 #include <asm/pgtable.h>
 
+#include "hardware.h"
 #include "cm.h"
 #include "common.h"
 
diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/hardware.h
index 306d025d9730..857ca5f8b9a6 100644
--- a/arch/arm/mach-integrator/include/mach/platform.h
+++ b/arch/arm/mach-integrator/hardware.h
@@ -1,4 +1,8 @@
 /*
+ *  This file contains the hardware definitions of the Integrator.
+ *
+ *  Copyright (C) 1998-1999 ARM Limited.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -13,26 +17,28 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-/**************************************************************************
- * * Copyright © ARM Limited 1998.  All rights reserved.
- * ***********************************************************************/
-/* ************************************************************************
- *
- *   Integrator address map
- *
- * ***********************************************************************/
+#ifndef INTEGRATOR_HARDWARE_H
+#define INTEGRATOR_HARDWARE_H
 
-#ifndef __address_h
-#define __address_h                     1
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xF0000000                 // VA of IO
+#define IO_SIZE			0x0B000000                 // How much?
+#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
+
+/* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
+#define IO_ADDRESS(x)	(((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
+#else
+#define IO_ADDRESS(x)	(x)
+#endif
 
-/* ========================================================================
- *  Integrator definitions
- * ========================================================================
- * ------------------------------------------------------------------------
- *  Memory definitions
- * ------------------------------------------------------------------------
+#define __io_address(n)		((void __iomem *)IO_ADDRESS(n))
+
+/*
  *  Integrator memory map
- *
  */
 #define INTEGRATOR_BOOT_ROM_LO          0x00000000
 #define INTEGRATOR_BOOT_ROM_HI          0x20000000
@@ -40,13 +46,13 @@
 #define INTEGRATOR_BOOT_ROM_SIZE        SZ_512K
 
 /*
- *  New Core Modules have different amounts of SSRAM, the amount of SSRAM
- *  fitted can be found in HDR_STAT.
+ * New Core Modules have different amounts of SSRAM, the amount of SSRAM
+ * fitted can be found in HDR_STAT.
  *
- *  The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
- *  the minimum amount of SSRAM fitted on any core module.
+ * The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
+ * the minimum amount of SSRAM fitted on any core module.
  *
- *  New Core Modules also alias the SSRAM.
+ * New Core Modules also alias the SSRAM.
  *
  */
 #define INTEGRATOR_SSRAM_BASE           0x00000000
@@ -61,7 +67,6 @@
 
 /*
  *  SDRAM is a SIMM therefore the size is not known.
- *
  */
 #define INTEGRATOR_SDRAM_BASE           0x00040000
 
@@ -81,10 +86,8 @@
 #define INTEGRATOR_LOGIC_MODULE2_BASE   0xE0000000
 #define INTEGRATOR_LOGIC_MODULE3_BASE   0xF0000000
 
-/* ------------------------------------------------------------------------
- *  Integrator header card registers
- * ------------------------------------------------------------------------
- *
+/*
+ * Integrator header card registers
  */
 #define INTEGRATOR_HDR_ID_OFFSET        0x00
 #define INTEGRATOR_HDR_PROC_OFFSET      0x04
@@ -173,16 +176,12 @@
 
 #define INTEGRATOR_HDR_SDRAM_SPD_OK     (1 << 5)
 
-
-/* ------------------------------------------------------------------------
- *  Integrator system registers
- * ------------------------------------------------------------------------
- *
+/*
+ * Integrator system registers
  */
 
 /*
  *  System Controller
- *
  */
 #define INTEGRATOR_SC_ID_OFFSET         0x00
 #define INTEGRATOR_SC_OSC_OFFSET        0x04
@@ -223,7 +222,6 @@
 
 /*
  *  External Bus Interface
- *
  */
 #define INTEGRATOR_EBI_BASE             0x12000000
 
@@ -272,7 +270,6 @@
 
 /*
  *  LED's & Switches
- *
  */
 #define INTEGRATOR_DBG_ALPHA_OFFSET     0x00
 #define INTEGRATOR_DBG_LEDS_OFFSET      0x04
@@ -292,32 +289,25 @@
 #define INTEGRATOR_CP_SIC_BASE		0xCA000000	/* SIC */
 #define INTEGRATOR_CP_CTL_BASE		0xCB000000	/* CP system control */
 
-/* ------------------------------------------------------------------------
- *  KMI keyboard/mouse definitions
- * ------------------------------------------------------------------------
- */
 /* PS2 Keyboard interface */
 #define KMI0_BASE                       INTEGRATOR_KBD_BASE
 
 /* PS2 Mouse interface */
 #define KMI1_BASE                       INTEGRATOR_MOUSE_BASE
 
-/* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */
-
-/* ------------------------------------------------------------------------
- *  Integrator Interrupt Controllers
- * ------------------------------------------------------------------------
+/*
+ * Integrator Interrupt Controllers
  *
- *  Offsets from interrupt controller base
  *
- *  System Controller interrupt controller base is
+ * Offsets from interrupt controller base
+ *
+ * System Controller interrupt controller base is
  *
  * 	INTEGRATOR_IC_BASE + (header_number << 6)
  *
- *  Core Module interrupt controller base is
+ * Core Module interrupt controller base is
  *
  * 	INTEGRATOR_HDR_IC
- *
  */
 #define IRQ_STATUS                      0
 #define IRQ_RAW_STATUS                  0x04
@@ -335,25 +325,8 @@
 #define FIQ_ENABLE_CLEAR                0x2C
 
 
-/* ------------------------------------------------------------------------
- *  Interrupts
- * ------------------------------------------------------------------------
- *
- *
- *  Each Core Module has two interrupts controllers, one on the core module
- *  itself and one in the system controller on the motherboard.  The
- *  READ_INT macro in target.s reads both interrupt controllers and returns
- *  a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller
- *  and bits 24 to 31 are from the core module.
- *
- *  The following definitions relate to the bitmask returned by READ_INT.
- *
- */
-
-/* ------------------------------------------------------------------------
- *  LED's
- * ------------------------------------------------------------------------
- *
+/*
+ * LED's
  */
 #define GREEN_LED                       0x01
 #define YELLOW_LED                      0x02
@@ -371,7 +344,6 @@
  *
  *  Timer 0 runs at bus frequency
  */
-
 #define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
 #define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
 #define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
@@ -379,4 +351,4 @@
 #define INTEGRATOR_CSR_BASE             0x10000000
 #define INTEGRATOR_CSR_SIZE             0x10000000
 
-#endif
+#endif /* INTEGRATOR_HARDWARE_H */
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 9f82f9dcbb98..0e870ea818c4 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -23,10 +23,11 @@
 #include <linux/io.h>
 #include <linux/platform_data/clk-integrator.h>
 #include <linux/slab.h>
+#include <linux/irqchip/arm-vic.h>
 
-#include <mach/lm.h>
-#include <mach/impd1.h>
 #include <asm/sizes.h>
+#include "lm.h"
+#include "impd1.h"
 
 static int module_id;
 
@@ -35,6 +36,7 @@ MODULE_PARM_DESC(lmid, "logic module stack position");
 
 struct impd1_module {
 	void __iomem	*base;
+	void __iomem	*vic_base;
 };
 
 void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
@@ -262,9 +264,6 @@ struct impd1_device {
 
 static struct impd1_device impd1_devs[] = {
 	{
-		.offset	= 0x03000000,
-		.id	= 0x00041190,
-	}, {
 		.offset	= 0x00100000,
 		.irq	= { 1 },
 		.id	= 0x00141011,
@@ -304,46 +303,72 @@ static struct impd1_device impd1_devs[] = {
 	}
 };
 
-static int impd1_probe(struct lm_device *dev)
+/*
+ * Valid IRQs: 0 thru 9 and 11, 10 unused.
+ */
+#define IMPD1_VALID_IRQS 0x00000bffU
+
+static int __init impd1_probe(struct lm_device *dev)
 {
 	struct impd1_module *impd1;
-	int i, ret;
+	int irq_base;
+	int i;
 
 	if (dev->id != module_id)
 		return -EINVAL;
 
-	if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers"))
+	if (!devm_request_mem_region(&dev->dev, dev->resource.start,
+				     SZ_4K, "LM registers"))
 		return -EBUSY;
 
-	impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL);
-	if (!impd1) {
-		ret = -ENOMEM;
-		goto release_lm;
-	}
+	impd1 = devm_kzalloc(&dev->dev, sizeof(struct impd1_module),
+			     GFP_KERNEL);
+	if (!impd1)
+		return -ENOMEM;
 
-	impd1->base = ioremap(dev->resource.start, SZ_4K);
-	if (!impd1->base) {
-		ret = -ENOMEM;
-		goto free_impd1;
-	}
+	impd1->base = devm_ioremap(&dev->dev, dev->resource.start, SZ_4K);
+	if (!impd1->base)
+		return -ENOMEM;
 
-	lm_set_drvdata(dev, impd1);
+	integrator_impd1_clk_init(impd1->base, dev->id);
 
-	printk("IM-PD1 found at 0x%08lx\n",
-		(unsigned long)dev->resource.start);
+	if (!devm_request_mem_region(&dev->dev,
+				     dev->resource.start + 0x03000000,
+				     SZ_4K, "VIC"))
+		return -EBUSY;
 
-	integrator_impd1_clk_init(impd1->base, dev->id);
+	impd1->vic_base = devm_ioremap(&dev->dev,
+				       dev->resource.start + 0x03000000,
+				       SZ_4K);
+	if (!impd1->vic_base)
+		return -ENOMEM;
+
+	irq_base = vic_init_cascaded(impd1->vic_base, dev->irq,
+				     IMPD1_VALID_IRQS, 0);
+
+	lm_set_drvdata(dev, impd1);
+
+	dev_info(&dev->dev, "IM-PD1 found at 0x%08lx\n",
+		 (unsigned long)dev->resource.start);
 
 	for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
 		struct impd1_device *idev = impd1_devs + i;
 		struct amba_device *d;
 		unsigned long pc_base;
 		char devname[32];
+		int irq1 = idev->irq[0];
+		int irq2 = idev->irq[1];
+
+		/* Translate IRQs to IM-PD1 local numberspace */
+		if (irq1)
+			irq1 += irq_base;
+		if (irq2)
+			irq2 += irq_base;
 
 		pc_base = dev->resource.start + idev->offset;
 		snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
 		d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K,
-					    dev->irq, dev->irq,
+					    irq1, irq2,
 					    idev->platform_data, idev->id,
 					    &dev->resource);
 		if (IS_ERR(d)) {
@@ -353,14 +378,6 @@ static int impd1_probe(struct lm_device *dev)
 	}
 
 	return 0;
-
- free_impd1:
-	if (impd1 && impd1->base)
-		iounmap(impd1->base);
-	kfree(impd1);
- release_lm:
-	release_mem_region(dev->resource.start, SZ_4K);
-	return ret;
 }
 
 static int impd1_remove_one(struct device *dev, void *data)
@@ -371,16 +388,10 @@ static int impd1_remove_one(struct device *dev, void *data)
 
 static void impd1_remove(struct lm_device *dev)
 {
-	struct impd1_module *impd1 = lm_get_drvdata(dev);
-
 	device_for_each_child(&dev->dev, NULL, impd1_remove_one);
 	integrator_impd1_clk_exit(dev->id);
 
 	lm_set_drvdata(dev, NULL);
-
-	iounmap(impd1->base);
-	kfree(impd1);
-	release_mem_region(dev->resource.start, SZ_4K);
 }
 
 static struct lm_driver impd1_driver = {
diff --git a/arch/arm/mach-integrator/include/mach/impd1.h b/arch/arm/mach-integrator/impd1.h
index d75de4b14237..76de4dc9bee4 100644
--- a/arch/arm/mach-integrator/include/mach/impd1.h
+++ b/arch/arm/mach-integrator/impd1.h
@@ -1,6 +1,3 @@
-#define IMPD1_OSC1	0x00
-#define IMPD1_OSC2	0x04
-#define IMPD1_LOCK	0x08
 #define IMPD1_LEDS	0x0c
 #define IMPD1_INT	0x10
 #define IMPD1_SW	0x14
@@ -15,4 +12,3 @@
 struct device;
 
 void impd1_tweak_control(struct device *dev, u32 mask, u32 val);
-
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
deleted file mode 100644
index 65fed7c0eb84..000000000000
--- a/arch/arm/mach-integrator/include/mach/hardware.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/hardware.h
- *
- *  This file contains the hardware definitions of the Integrator.
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/*
- * Where in virtual memory the IO devices (timers, system controllers
- * and so on)
- */
-#define IO_BASE			0xF0000000                 // VA of IO 
-#define IO_SIZE			0x0B000000                 // How much?
-#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
-
-/* macro to get at IO space when running virtually */
-#ifdef CONFIG_MMU
-#define IO_ADDRESS(x)	(((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
-#else
-#define IO_ADDRESS(x)	(x)
-#endif
-
-#define __io_address(n)		((void __iomem *)IO_ADDRESS(n))
-
-#endif
-
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 17c0fe627435..dd0cc677d596 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -42,24 +42,23 @@
 #include <linux/sys_soc.h>
 #include <linux/termios.h>
 #include <linux/sched_clock.h>
+#include <linux/clk-provider.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
 #include <asm/mach-types.h>
 
-#include <mach/lm.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
+#include "hardware.h"
 #include "cm.h"
 #include "common.h"
 #include "pci_v3.h"
+#include "lm.h"
 
 /* Base address to the AP system controller */
 void __iomem *ap_syscon_base;
@@ -358,7 +357,7 @@ static struct clock_event_device integrator_clockevent = {
 
 static struct irqaction integrator_timer_irq = {
 	.name		= "timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= integrator_timer_interrupt,
 	.dev_id		= &integrator_clockevent,
 };
@@ -402,10 +401,7 @@ static void __init ap_of_timer_init(void)
 	struct clk *clk;
 	unsigned long rate;
 
-	clk = clk_get_sys("ap_timer", NULL);
-	BUG_ON(IS_ERR(clk));
-	clk_prepare_enable(clk);
-	rate = clk_get_rate(clk);
+	of_clk_init(NULL);
 
 	err = of_property_read_string(of_aliases,
 				"arm,timer-primary", &path);
@@ -415,6 +411,12 @@ static void __init ap_of_timer_init(void)
 	base = of_iomap(node, 0);
 	if (WARN_ON(!base))
 		return;
+
+	clk = of_clk_get(node, 0);
+	BUG_ON(IS_ERR(clk));
+	clk_prepare_enable(clk);
+	rate = clk_get_rate(clk);
+
 	writel(0, base + TIMER_CTRL);
 	integrator_clocksource_init(rate, base);
 
@@ -427,6 +429,12 @@ static void __init ap_of_timer_init(void)
 	if (WARN_ON(!base))
 		return;
 	irq = irq_of_parse_and_map(node, 0);
+
+	clk = of_clk_get(node, 0);
+	BUG_ON(IS_ERR(clk));
+	clk_prepare_enable(clk);
+	rate = clk_get_rate(clk);
+
 	writel(0, base + TIMER_CTRL);
 	integrator_clockevent_init(rate, base, irq);
 }
@@ -440,7 +448,6 @@ static void __init ap_init_irq_of(void)
 {
 	cm_init();
 	of_irq_init(fpga_irq_of_match);
-	integrator_clk_init(false);
 }
 
 /* For the Device Tree, add in the UART callbacks as AUXDATA */
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a3ef961e4a93..a938242b0c95 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -23,31 +23,22 @@
 #include <linux/irqchip/versatile-fpga.h>
 #include <linux/gfp.h>
 #include <linux/mtd/physmap.h>
-#include <linux/platform_data/clk-integrator.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/sys_soc.h>
+#include <linux/sched_clock.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/icst.h>
-
-#include <mach/lm.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <asm/hardware/timer-sp.h>
-
 #include <plat/clcd.h>
-#include <plat/sched_clock.h>
 
+#include "hardware.h"
 #include "cm.h"
 #include "common.h"
 
@@ -234,11 +225,14 @@ static struct clcd_board clcd_data = {
 
 #define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
 
+static u64 notrace intcp_read_sched_clock(void)
+{
+	return readl(REFCOUNTER);
+}
+
 static void __init intcp_init_early(void)
 {
-#ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK
-	versatile_sched_clock_init(REFCOUNTER, 24000000);
-#endif
+	sched_clock_register(intcp_read_sched_clock, 32, 24000000);
 }
 
 static const struct of_device_id fpga_irq_of_match[] __initconst = {
@@ -250,7 +244,6 @@ static void __init intcp_init_irq_of(void)
 {
 	cm_init();
 	of_irq_init(fpga_irq_of_match);
-	integrator_clk_init(true);
 }
 
 /*
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index cb6ac58f5e07..f1dcb57a59e2 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -11,9 +11,7 @@
 #include <linux/slab.h>
 #include <linux/leds.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
+#include "hardware.h"
 #include "cm.h"
 
 #if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index f52c7af31eaa..3f9e9f043168 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -12,7 +12,7 @@
 #include <linux/device.h>
 #include <linux/slab.h>
 
-#include <mach/lm.h>
+#include "lm.h"
 
 #define to_lm_device(d)	container_of(d, struct lm_device, dev)
 #define to_lm_driver(d)	container_of(d, struct lm_driver, drv)
diff --git a/arch/arm/mach-integrator/include/mach/lm.h b/arch/arm/mach-integrator/lm.h
index 28186b6f2c09..28186b6f2c09 100644
--- a/arch/arm/mach-integrator/include/mach/lm.h
+++ b/arch/arm/mach-integrator/lm.h
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index c5e01b24d9fb..05e1f73a1e8d 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -34,15 +34,13 @@
 #include <linux/of_pci.h>
 #include <video/vga.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
 #include <asm/mach/map.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
 #include <asm/irq_regs.h>
 
 #include "pci_v3.h"
+#include "hardware.h"
 
 /*
  * Where in the memory map does PCI live?
diff --git a/arch/arm/mach-iop13xx/include/mach/irqs.h b/arch/arm/mach-iop13xx/include/mach/irqs.h
index 054e7acb5bfa..e8d24d32121a 100644
--- a/arch/arm/mach-iop13xx/include/mach/irqs.h
+++ b/arch/arm/mach-iop13xx/include/mach/irqs.h
@@ -191,6 +191,4 @@ static inline u32 read_intpnd_3(void)
 #define NR_IOP13XX_IRQS	(IRQ_IOP13XX_HPI + 1)
 #endif
 
-#define NR_IRQS		NR_IOP13XX_IRQS
-
 #endif /* _IOP13XX_IRQ_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
index f1c00d6d560b..15bc9bb78a6b 100644
--- a/arch/arm/mach-iop13xx/include/mach/time.h
+++ b/arch/arm/mach-iop13xx/include/mach/time.h
@@ -1,5 +1,8 @@
 #ifndef _IOP13XX_TIME_H_
 #define _IOP13XX_TIME_H_
+
+#include <mach/irqs.h>
+
 #define IRQ_IOP_TIMER0 IRQ_IOP13XX_TIMER0
 
 #define IOP_TMR_EN	    0x02
diff --git a/arch/arm/mach-iop13xx/include/mach/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h
deleted file mode 100644
index 45fb2745bb54..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/timex.h
+++ /dev/null
@@ -1 +0,0 @@
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 02a8228ac2d3..9cd07d396093 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -93,4 +93,5 @@ MACHINE_START(IQ81340MC, "Intel IQ81340MC")
 	.init_time	= iq81340mc_timer_init,
 	.init_machine   = iq81340mc_init,
 	.restart	= iop13xx_restart,
+	.nr_irqs	= NR_IOP13XX_IRQS,
 MACHINE_END
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index 1b80f10722b3..b3ec11cb707e 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -95,4 +95,5 @@ MACHINE_START(IQ81340SC, "Intel IQ81340SC")
 	.init_time	= iq81340sc_timer_init,
 	.init_machine   = iq81340sc_init,
 	.restart	= iop13xx_restart,
+	.nr_irqs	= NR_IOP13XX_IRQS,
 MACHINE_END
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index 560d5b2dec22..e7730cf9c15d 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -23,10 +23,7 @@
 #include <linux/msi.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-
-
-#define IOP13XX_NUM_MSI_IRQS 128
-static DECLARE_BITMAP(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
+#include <mach/irqs.h>
 
 /* IMIPR0 CP6 R8 Page 1
  */
@@ -121,41 +118,6 @@ void __init iop13xx_msi_init(void)
 	irq_set_chained_handler(IRQ_IOP13XX_INBD_MSI, iop13xx_msi_handler);
 }
 
-/*
- * Dynamic irq allocate and deallocation
- */
-int create_irq(void)
-{
-	int irq, pos;
-
-again:
-	pos = find_first_zero_bit(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
-	irq = IRQ_IOP13XX_MSI_0 + pos;
-	if (irq > NR_IRQS)
-		return -ENOSPC;
-	/* test_and_set_bit operates on 32-bits at a time */
-	if (test_and_set_bit(pos, msi_irq_in_use))
-		goto again;
-
-	dynamic_irq_init(irq);
-
-	return irq;
-}
-
-void destroy_irq(unsigned int irq)
-{
-	int pos = irq - IRQ_IOP13XX_MSI_0;
-
-	dynamic_irq_cleanup(irq);
-
-	clear_bit(pos, msi_irq_in_use);
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	destroy_irq(irq);
-}
-
 static void iop13xx_msi_nop(struct irq_data *d)
 {
 	return;
@@ -172,12 +134,17 @@ static struct irq_chip iop13xx_msi_chip = {
 
 int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
-	int id, irq = create_irq();
+	int id, irq = irq_alloc_desc_from(IRQ_IOP13XX_MSI_0, -1);
 	struct msi_msg msg;
 
 	if (irq < 0)
 		return irq;
 
+	if (irq >= NR_IOP13XX_IRQS) {
+		irq_free_desc(irq);
+		return -ENOSPC;
+	}
+
 	irq_set_msi_desc(irq, desc);
 
 	msg.address_hi = 0x0;
@@ -191,3 +158,8 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 
 	return 0;
 }
+
+void arch_teardown_msi_irq(unsigned int irq)
+{
+	irq_free_desc(irq);
+}
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index 96e6c7a6793b..bca96f433495 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -27,6 +27,7 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/hardware/iop_adma.h>
+#include <mach/irqs.h>
 
 #define IOP13XX_UART_XTAL 33334000
 #define IOP13XX_SETUP_DEBUG 0
diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c
index 6fdad7a0425a..db511ec2b1df 100644
--- a/arch/arm/mach-iop13xx/tpmi.c
+++ b/arch/arm/mach-iop13xx/tpmi.c
@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
+#include <mach/irqs.h>
 
 /* assumes CONTROLLER_ONLY# is never asserted in the ESSR register */
 #define IOP13XX_TPMI_MMR(dev) 	IOP13XX_REG_ADDR32_PHYS(0x48000 + (dev << 12))
diff --git a/arch/arm/mach-iop32x/include/mach/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h
deleted file mode 100644
index 7262ab81419d..000000000000
--- a/arch/arm/mach-iop32x/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/timex.h
- *
- * IOP32x architecture timex specifications
- */
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-iop33x/include/mach/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h
deleted file mode 100644
index 54c589091d6e..000000000000
--- a/arch/arm/mach-iop33x/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/timex.h
- *
- * IOP3xx architecture timex specifications
- */
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 200970d56f6d..4977296f0c78 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -315,33 +315,6 @@ static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *r
 	return 0;
 }
 
-
-static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
-	return (dma_addr + size) >= SZ_64M;
-}
-
-/*
- * Setup DMA mask to 64MB on PCI devices. Ignore all other devices.
- */
-static int ixp4xx_pci_platform_notify(struct device *dev)
-{
-	if (dev_is_pci(dev)) {
-		*dev->dma_mask =  SZ_64M - 1;
-		dev->coherent_dma_mask = SZ_64M - 1;
-		dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
-	}
-	return 0;
-}
-
-static int ixp4xx_pci_platform_notify_remove(struct device *dev)
-{
-	if (dev_is_pci(dev))
-		dmabounce_unregister_dev(dev);
-
-	return 0;
-}
-
 void __init ixp4xx_pci_preinit(void)
 {
 	unsigned long cpuid = read_cpuid_id();
@@ -475,20 +448,8 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
 	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
 	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
 
-	platform_notify = ixp4xx_pci_platform_notify;
-	platform_notify_remove = ixp4xx_pci_platform_notify_remove;
-
 	return 1;
 }
 
-int dma_set_coherent_mask(struct device *dev, u64 mask)
-{
-	if (mask >= SZ_64M - 1)
-		return 0;
-
-	return -EIO;
-}
-
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
-EXPORT_SYMBOL(dma_set_coherent_mask);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 6d68aed6548a..fc4b7b24265e 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -23,15 +23,14 @@
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
 #include <linux/time.h>
-#include <linux/timex.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/export.h>
 #include <linux/gpio.h>
 #include <linux/cpu.h>
+#include <linux/pci.h>
 #include <linux/sched_clock.h>
-
 #include <mach/udc.h>
 #include <mach/hardware.h>
 #include <mach/io.h>
@@ -40,11 +39,21 @@
 #include <asm/page.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>
-
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#define IXP4XX_TIMER_FREQ 66666000
+
+/*
+ * The timer register doesn't allow to specify the two least significant bits of
+ * the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is
+ * the best value with the two least significant bits unset.
+ */
+#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \
+				       (IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \
+			(IXP4XX_OST_RELOAD_MASK + 1)
+
 static void __init ixp4xx_clocksource_init(void);
 static void __init ixp4xx_clockevent_init(void);
 static struct clock_event_device clockevent_ixp4xx;
@@ -312,7 +321,7 @@ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction ixp4xx_timer_irq = {
 	.name		= "timer1",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= ixp4xx_timer_interrupt,
 	.dev_id		= &clockevent_ixp4xx,
 };
@@ -520,7 +529,7 @@ static void ixp4xx_set_mode(enum clock_event_mode mode,
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK;
+		osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK;
  		opts = IXP4XX_OST_ENABLE;
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -578,6 +587,54 @@ void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
 	}
 }
 
+#ifdef CONFIG_PCI
+static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
+{
+	return (dma_addr + size) > SZ_64M;
+}
+
+static int ixp4xx_platform_notify_remove(struct device *dev)
+{
+	if (dev_is_pci(dev))
+		dmabounce_unregister_dev(dev);
+
+	return 0;
+}
+#endif
+
+/*
+ * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things.
+ */
+static int ixp4xx_platform_notify(struct device *dev)
+{
+	dev->dma_mask = &dev->coherent_dma_mask;
+
+#ifdef CONFIG_PCI
+	if (dev_is_pci(dev)) {
+		dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */
+		dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
+		return 0;
+	}
+#endif
+
+	dev->coherent_dma_mask = DMA_BIT_MASK(32);
+	return 0;
+}
+
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (dev_is_pci(dev))
+		mask &= DMA_BIT_MASK(28); /* 64 MB */
+
+	if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) {
+		dev->coherent_dma_mask = mask;
+		return 0;
+	}
+
+	return -EIO;		/* device wanted sub-64MB mask */
+}
+EXPORT_SYMBOL(dma_set_coherent_mask);
+
 #ifdef CONFIG_IXP4XX_INDIRECT_PCI
 /*
  * In the case of using indirect PCI, we simply return the actual PCI
@@ -600,12 +657,16 @@ static void ixp4xx_iounmap(void __iomem *addr)
 	if (!is_pci_memory((__force u32)addr))
 		__iounmap(addr);
 }
+#endif
 
 void __init ixp4xx_init_early(void)
 {
+	platform_notify = ixp4xx_platform_notify;
+#ifdef CONFIG_PCI
+	platform_notify_remove = ixp4xx_platform_notify_remove;
+#endif
+#ifdef CONFIG_IXP4XX_INDIRECT_PCI
 	arch_ioremap_caller = ixp4xx_ioremap_caller;
 	arch_iounmap = ixp4xx_iounmap;
-}
-#else
-void __init ixp4xx_init_early(void) {}
 #endif
+}
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 736dc692d540..43ee06d3abe5 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -233,8 +233,7 @@ static int __init dsmg600_gpio_init(void)
 
 	gpio_request(DSMG600_RB_GPIO, "reset button");
 	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
-		IRQF_DISABLED | IRQF_TRIGGER_LOW,
-		"DSM-G600 reset button", NULL) < 0) {
+		IRQF_TRIGGER_LOW, "DSM-G600 reset button", NULL) < 0) {
 
 		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
 			gpio_to_irq(DSMG600_RB_GPIO));
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 429966b756ed..5c4b0c4a1b37 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -208,16 +208,14 @@ static void __init fsg_init(void)
 	platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
 
 	if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
-			IRQF_DISABLED | IRQF_TRIGGER_LOW,
-			"FSG reset button", NULL) < 0) {
+			IRQF_TRIGGER_LOW, "FSG reset button", NULL) < 0) {
 
 		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
 			gpio_to_irq(FSG_RB_GPIO));
 	}
 
 	if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
-			IRQF_DISABLED | IRQF_TRIGGER_LOW,
-			"FSG power button", NULL) < 0) {
+			IRQF_TRIGGER_LOW, "FSG power button", NULL) < 0) {
 
 		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
 			gpio_to_irq(FSG_SB_GPIO));
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index e54ff491c105..80bd9d6d04de 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/hdlc.h>
 #include <linux/i2c-gpio.h>
 #include <linux/io.h>
@@ -79,19 +80,19 @@ static u8 control_value;
 
 static void set_scl(u8 value)
 {
-	gpio_line_set(GPIO_SCL, !!value);
+	gpio_set_value(GPIO_SCL, !!value);
 	udelay(3);
 }
 
 static void set_sda(u8 value)
 {
-	gpio_line_set(GPIO_SDA, !!value);
+	gpio_set_value(GPIO_SDA, !!value);
 	udelay(3);
 }
 
 static void set_str(u8 value)
 {
-	gpio_line_set(GPIO_STR, !!value);
+	gpio_set_value(GPIO_STR, !!value);
 	udelay(3);
 }
 
@@ -108,8 +109,8 @@ static void output_control(void)
 {
 	int i;
 
-	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+	gpio_direction_output(GPIO_SCL, 1);
+	gpio_direction_output(GPIO_SDA, 1);
 
 	for (i = 0; i < 8; i++) {
 		set_scl(0);
@@ -151,8 +152,8 @@ static int hss_set_clock(int port, unsigned int clock_type)
 
 static irqreturn_t hss_dcd_irq(int irq, void *pdev)
 {
-	int i, port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
-	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
+	int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
 	set_carrier_cb_tab[port](pdev, !i);
 	return IRQ_HANDLED;
 }
@@ -168,7 +169,7 @@ static int hss_open(int port, void *pdev,
 	else
 		irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N);
 
-	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
 	set_carrier_cb(pdev, !i);
 
 	set_carrier_cb_tab[!!port] = set_carrier_cb;
@@ -181,7 +182,7 @@ static int hss_open(int port, void *pdev,
 
 	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
 	output_control();
-	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
+	gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
 	return 0;
 }
 
@@ -193,7 +194,7 @@ static void hss_close(int port, void *pdev)
 
 	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
 	output_control();
-	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
+	gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
 }
 
 
@@ -413,13 +414,21 @@ static void __init gmlr_init(void)
 	if (hw_bits & CFG_HW_HAS_EEPROM)
 		device_tab[devices++] = &device_i2c; /* max index 6 */
 
-	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
-	gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
+	gpio_request(GPIO_SCL, "SCL/clock");
+	gpio_request(GPIO_SDA, "SDA/data");
+	gpio_request(GPIO_STR, "strobe");
+	gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS");
+	gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS");
+	gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD");
+	gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD");
+
+	gpio_direction_output(GPIO_SCL, 1);
+	gpio_direction_output(GPIO_SDA, 1);
+	gpio_direction_output(GPIO_STR, 0);
+	gpio_direction_output(GPIO_HSS0_RTS_N, 1);
+	gpio_direction_output(GPIO_HSS1_RTS_N, 1);
+	gpio_direction_input(GPIO_HSS0_DCD_N);
+	gpio_direction_input(GPIO_HSS1_DCD_N);
 	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
 	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index 5cf30d1b78d2..559c69a47731 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -48,9 +48,10 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
  * fallback to the default.
  */
 
+extern unsigned long pcibios_min_mem;
 static inline int is_pci_memory(u32 addr)
 {
-	return (addr >= PCIBIOS_MIN_MEM) && (addr <= 0x4FFFFFFF);
+	return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF);
 }
 
 #define writeb(v, p)			__indirect_writeb(v, p)
diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h
deleted file mode 100644
index 0396d89f947c..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/timex.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/timex.h
- * 
- */
-
-#include <mach/ixp4xx-regs.h>
-
-/*
- * We use IXP425 General purpose timer for our timer needs, it runs at 
- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
- * timer register ignores the bottom 2 bits of the LATCH value.
- */
-#define IXP4XX_TIMER_FREQ 66666000
-#define CLOCK_TICK_RATE \
-	(((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 507cb5233537..4e0f762bc651 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -295,8 +295,7 @@ static void __init nas100d_init(void)
 	pm_power_off = nas100d_power_off;
 
 	if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
-		IRQF_DISABLED | IRQF_TRIGGER_LOW,
-		"NAS100D reset button", NULL) < 0) {
+		IRQF_TRIGGER_LOW, "NAS100D reset button", NULL) < 0) {
 
 		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
 			gpio_to_irq(NAS100D_RB_GPIO));
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index ba5f1cda2a9d..88c025f52d8d 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -265,16 +265,14 @@ static void __init nslu2_init(void)
 	pm_power_off = nslu2_power_off;
 
 	if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler,
-		IRQF_DISABLED | IRQF_TRIGGER_LOW,
-		"NSLU2 reset button", NULL) < 0) {
+		IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) {
 
 		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
 			gpio_to_irq(NSLU2_RB_GPIO));
 	}
 
 	if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler,
-		IRQF_DISABLED | IRQF_TRIGGER_HIGH,
-		"NSLU2 power button", NULL) < 0) {
+		IRQF_TRIGGER_HIGH, "NSLU2 power button", NULL) < 0) {
 
 		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
 			gpio_to_irq(NSLU2_PB_GPIO));
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 75ef03dc9964..2d494b454376 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -17,9 +17,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#ifdef CONFIG_LEDS_CLASS
 #include <linux/leds.h>
-#endif
 
 #include <asm/setup.h>
 #include <asm/memory.h>
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 90a708fef541..f50bc936cb84 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -1,13 +1,9 @@
 config ARCH_KEYSTONE
 	bool "Texas Instruments Keystone Devices"
 	depends on ARCH_MULTI_V7
-	select CPU_V7
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
-	select HAVE_SMP
 	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_ERRATA_798181 if SMP
 	select COMMON_CLK_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index 6e6bb7d5ea30..e0b9e1b9cf30 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -46,7 +46,7 @@ static void __init keystone_init(void)
 }
 
 static const char *keystone_match[] __initconst = {
-	"ti,keystone-evm",
+	"ti,keystone",
 	NULL,
 };
 
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index fe8319ad3158..df4b26340ae4 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -106,13 +106,6 @@ config ARCH_KIRKWOOD_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Kirkwood using flattened device tree.
 
-config MACH_MV88F6281GTW_GE_DT
-	bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)"
-	depends on ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell 88F6281 GTW GE Board (Flattened Device Tree).
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 144b51102939..3a72c5c6e747 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,5 +1,4 @@
-obj-y				+= common.o pcie.o
-obj-$(CONFIG_KIRKWOOD_LEGACY)	+= irq.o mpp.o
+obj-$(CONFIG_KIRKWOOD_LEGACY)	+= irq.o mpp.o common.o pcie.o
 obj-$(CONFIG_PM)		+= pm.o
 
 obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
@@ -13,4 +12,3 @@ obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
-obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT)	+= board-mv88f6281gtw_ge.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 78188159484d..ff18ff20f71f 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -19,11 +19,84 @@
 #include <linux/of_platform.h>
 #include <linux/dma-mapping.h>
 #include <linux/irqchip.h>
-#include <linux/kexec.h>
+#include <asm/hardware/cache-feroceon-l2.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 #include <mach/bridge-regs.h>
 #include <plat/common.h>
-#include "common.h"
+#include <plat/pcie.h>
+#include "pm.h"
+
+static struct map_desc kirkwood_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
+		.length		= KIRKWOOD_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init kirkwood_map_io(void)
+{
+	iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
+}
+
+static struct resource kirkwood_cpufreq_resources[] = {
+	[0] = {
+		.start  = CPU_CONTROL_PHYS,
+		.end    = CPU_CONTROL_PHYS + 3,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+	.name		= "kirkwood-cpufreq",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kirkwood_cpufreq_resources),
+	.resource	= kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+	platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= DDR_OPERATION_BASE,
+		.end	= DDR_OPERATION_BASE + 3,
+	},
+};
+
+static struct platform_device kirkwood_cpuidle = {
+	.name		= "kirkwood_cpuidle",
+	.id		= -1,
+	.resource	= kirkwood_cpuidle_resource,
+	.num_resources	= 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+	platform_device_register(&kirkwood_cpuidle);
+}
+
+/* Temporary here since mach-mvebu has a function we can use */
+static void kirkwood_restart(enum reboot_mode mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
 
 #define MV643XX_ETH_MAC_ADDR_LOW	0x0414
 #define MV643XX_ETH_MAC_ADDR_HIGH	0x0418
@@ -104,35 +177,35 @@ eth_fixup_skip:
 	}
 }
 
-static void __init kirkwood_dt_init(void)
+/*
+ * Disable propagation of mbus errors to the CPU local bus, as this
+ * causes mbus errors (which can occur for example for PCI aborts) to
+ * throw CPU aborts, which we're not set up to deal with.
+ */
+static void __init kirkwood_disable_mbus_error_propagation(void)
 {
-	pr_info("Kirkwood: %s.\n", kirkwood_id());
+	void __iomem *cpu_config;
 
-	/*
-	 * Disable propagation of mbus errors to the CPU local bus,
-	 * as this causes mbus errors (which can occur for example
-	 * for PCI aborts) to throw CPU aborts, which we're not set
-	 * up to deal with.
-	 */
-	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+	cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
+	writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
+	iounmap(cpu_config);
+}
 
-	BUG_ON(mvebu_mbus_dt_init());
+static void __init kirkwood_dt_init(void)
+{
+	kirkwood_disable_mbus_error_propagation();
 
-	kirkwood_l2_init();
+	BUG_ON(mvebu_mbus_dt_init(false));
 
+#ifdef CONFIG_CACHE_FEROCEON_L2
+	feroceon_of_init();
+#endif
 	kirkwood_cpufreq_init();
 	kirkwood_cpuidle_init();
 
 	kirkwood_pm_init();
 	kirkwood_dt_eth_fixup();
 
-#ifdef CONFIG_KEXEC
-	kexec_reinit = kirkwood_enable_pcie;
-#endif
-
-	if (of_machine_is_compatible("marvell,mv88f6281gtw-ge"))
-		mv88f6281gtw_ge_init();
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
diff --git a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
deleted file mode 100644
index ee5eea678c11..000000000000
--- a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
- *
- * Marvell 88F6281 GTW GE Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/timer.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/gpio.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
-	.port_names[0]	= "lan1",
-	.port_names[1]	= "lan2",
-	.port_names[2]	= "lan3",
-	.port_names[3]	= "lan4",
-	.port_names[4]	= "wan",
-	.port_names[5]	= "cpu",
-};
-
-static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &mv88f6281gtw_ge_switch_chip_data,
-};
-
-void __init mv88f6281gtw_ge_init(void)
-{
-	kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
-	kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
-}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index f3407a5db216..255f33a3903c 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -25,10 +25,10 @@
 #include <asm/page.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
+#include <asm/hardware/cache-feroceon-l2.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
 #include <linux/platform_data/asoc-kirkwood.h>
-#include <plat/cache-feroceon-l2.h>
 #include <linux/platform_data/mmc-mvsdio.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include <linux/platform_data/usb-ehci-orion.h>
@@ -36,6 +36,7 @@
 #include <plat/time.h>
 #include <linux/platform_data/dma-mv_xor.h>
 #include "common.h"
+#include "pm.h"
 
 /* These can go away once Kirkwood uses the mvebu-mbus DT binding */
 #define KIRKWOOD_MBUS_NAND_TARGET 0x01
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 05fd648df543..832a4e2ab8d7 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -58,19 +58,6 @@ void kirkwood_cpufreq_init(void);
 void kirkwood_restart(enum reboot_mode, const char *);
 void kirkwood_clk_init(void);
 
-#ifdef CONFIG_PM
-void kirkwood_pm_init(void);
-#else
-static inline void kirkwood_pm_init(void) {};
-#endif
-
-/* board init functions for boards not fully converted to fdt */
-#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT
-void mv88f6281gtw_ge_init(void);
-#else
-static inline void mv88f6281gtw_ge_init(void) {};
-#endif
-
 /* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 8b9d1c9ff199..1c37082c8b39 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -14,6 +14,7 @@
 #include <mach/kirkwood.h>
 
 #define CPU_CONFIG		(BRIDGE_VIRT_BASE + 0x0100)
+#define CPU_CONFIG_PHYS		(BRIDGE_PHYS_BASE + 0x0100)
 #define CPU_CONFIG_ERROR_PROP	0x00000004
 
 #define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
@@ -21,6 +22,7 @@
 #define CPU_RESET		0x00000002
 
 #define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
+#define RSTOUTn_MASK_PHYS	(BRIDGE_PHYS_BASE + 0x0108)
 #define SOFT_RESET_OUT_EN	0x00000004
 
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
@@ -79,5 +81,6 @@
 #define CGC_RESERVED		(0x6 << 21)
 
 #define MEMORY_PM_CTRL		(BRIDGE_VIRT_BASE + 0x118)
+#define MEMORY_PM_CTRL_PHYS	(BRIDGE_PHYS_BASE + 0x118)
 
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h
deleted file mode 100644
index c923cd169b9c..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/timex.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
-
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 2a97a2e4163c..2c47a8ad0e27 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -7,6 +7,7 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <asm/exception.h>
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
@@ -30,11 +31,47 @@ static int __initdata gpio1_irqs[4] = {
 	0,
 };
 
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Compiling with both non-DT and DT support enabled, will
+ * break asm irq handler used by non-DT boards. Therefore,
+ * we provide a C-style irq handler even for non-DT boards,
+ * if MULTI_IRQ_HANDLER is set.
+ */
+
+static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE;
+
+asmlinkage void
+__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs)
+{
+	u32 stat;
+
+	stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF);
+	stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF);
+	if (stat) {
+		unsigned int hwirq = __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+	stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF);
+	stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF);
+	if (stat) {
+		unsigned int hwirq = 32 + __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+}
+#endif
+
 void __init kirkwood_init_irq(void)
 {
 	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
 	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+	set_handle_irq(kirkwood_legacy_handle_irq);
+#endif
+
 	/*
 	 * Initialize gpiolib for GPIOs 0-49.
 	 */
diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c
index c6ab8d9303a5..8e5e0329d04c 100644
--- a/arch/arm/mach-kirkwood/pm.c
+++ b/arch/arm/mach-kirkwood/pm.c
@@ -21,15 +21,16 @@
 #include "common.h"
 
 static void __iomem *ddr_operation_base;
+static void __iomem *memory_pm_ctrl;
 
 static void kirkwood_low_power(void)
 {
 	u32 mem_pm_ctrl;
 
-	mem_pm_ctrl = readl(MEMORY_PM_CTRL);
+	mem_pm_ctrl = readl(memory_pm_ctrl);
 
 	/* Set peripherals to low-power mode */
-	writel_relaxed(~0, MEMORY_PM_CTRL);
+	writel_relaxed(~0, memory_pm_ctrl);
 
 	/* Set DDR in self-refresh */
 	writel_relaxed(0x7, ddr_operation_base);
@@ -41,7 +42,7 @@ static void kirkwood_low_power(void)
 	 */
 	cpu_do_idle();
 
-	writel_relaxed(mem_pm_ctrl, MEMORY_PM_CTRL);
+	writel_relaxed(mem_pm_ctrl, memory_pm_ctrl);
 }
 
 static int kirkwood_suspend_enter(suspend_state_t state)
@@ -69,5 +70,7 @@ static const struct platform_suspend_ops kirkwood_suspend_ops = {
 void __init kirkwood_pm_init(void)
 {
 	ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+	memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
+
 	suspend_set_ops(&kirkwood_suspend_ops);
 }
diff --git a/arch/arm/mach-kirkwood/pm.h b/arch/arm/mach-kirkwood/pm.h
new file mode 100644
index 000000000000..21e7530f368b
--- /dev/null
+++ b/arch/arm/mach-kirkwood/pm.h
@@ -0,0 +1,26 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_KIRKWOOD_PM_H
+#define __ARCH_KIRKWOOD_PM_H
+
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
+#else
+static inline void kirkwood_pm_init(void) {};
+#endif
+
+#endif
diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c
index 002bc619bb68..f2658168eeff 100644
--- a/arch/arm/mach-ks8695/board-og.c
+++ b/arch/arm/mach-ks8695/board-og.c
@@ -44,7 +44,8 @@ static void __init og_register_pci(void)
 	if (machine_is_im4004())
 		ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW);
 
-	ks8695_init_pci(&og_pci);
+	if (IS_ENABLED(CONFIG_PCI))
+		ks8695_init_pci(&og_pci);
 }
 
 /*
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
deleted file mode 100644
index 10f716371bd3..000000000000
--- a/arch/arm/mach-ks8695/include/mach/timex.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/timex.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - Time Parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <mach/hardware.h>
-
-#define CLOCK_TICK_RATE 	KS8695_CLOCK_RATE
-
-#endif
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 426c97662f5b..a197874bf382 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -122,7 +122,7 @@ static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction ks8695_timer_irq = {
 	.name		= "ks8695_tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.flags		= IRQF_TIMER,
 	.handler	= ks8695_timer_interrupt,
 };
 
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index d7aa54c25c59..de03620d7fa7 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -99,6 +99,7 @@ u32 lpc32xx_return_iram_size(void)
 
 	return iram_size;
 }
+EXPORT_SYMBOL_GPL(lpc32xx_return_iram_size);
 
 /*
  * Computes PLL rate from PLL register and input clock
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 34932e0e31fa..7858d5b6f6ce 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -202,9 +202,6 @@ static struct mmci_platform_data lpc32xx_mmci_data = {
 	.ocr_mask	= MMC_VDD_30_31 | MMC_VDD_31_32 |
 			  MMC_VDD_32_33 | MMC_VDD_33_34,
 	.ios_handler	= mmc_handle_ios,
-	.dma_filter	= NULL,
-	/* No DMA for now since AMBA PL080 dmaengine driver only does scatter
-	 * gather, and the MMCI driver doesn't do it this way */
 };
 
 static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
index 20eab63d10ba..4e5837299c04 100644
--- a/arch/arm/mach-lpc32xx/timer.c
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -90,7 +90,7 @@ static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction lpc32xx_timer_irq = {
 	.name		= "LPC32XX Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= lpc32xx_timer_interrupt,
 };
 
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 0c002099c3a3..7e0248582efd 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -231,7 +231,7 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
 	.debounce_interval	= 30,
 };
 
-#if defined(CONFIG_USB_EHCI_MV)
+#if IS_ENABLED(CONFIG_USB_EHCI_MV)
 static struct mv_usb_platform_data pxa168_sph_pdata = {
 	.mode           = MV_USB_MODE_HOST,
 	.phy_init	= pxa_usb_phy_init,
@@ -258,7 +258,7 @@ static void __init common_init(void)
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
 
-#if defined(CONFIG_USB_EHCI_MV)
+#if IS_ENABLED(CONFIG_USB_EHCI_MV)
 	pxa168_add_usb_host(&pxa168_sph_pdata);
 #endif
 }
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index dd2d8b103cc8..2bcb766af05d 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -72,7 +72,7 @@ int __init pxa_register_device(struct pxa_device_desc *desc,
 	return platform_device_add(pdev);
 }
 
-#if defined(CONFIG_USB) || defined(CONFIG_USB_GADGET)
+#if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
 
 /*****************************************************************************
  * The registers read/write routines
@@ -112,9 +112,9 @@ static void u2o_write(void __iomem *base, unsigned int offset,
 	readl_relaxed(base + offset);
 }
 
-#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV)
+#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
 
-#if defined(CONFIG_CPU_PXA910) || defined(CONFIG_CPU_PXA168)
+#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
 
 static DEFINE_MUTEX(phy_lock);
 static int phy_init_cnt;
@@ -238,10 +238,10 @@ void pxa_usb_phy_deinit(void __iomem *phy_reg)
 #endif
 #endif
 
-#ifdef CONFIG_USB_SUPPORT
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
 static u64 usb_dma_mask = ~(u32)0;
 
-#ifdef CONFIG_USB_MV_UDC
+#if IS_ENABLED(CONFIG_USB_MV_UDC)
 struct resource pxa168_u2o_resources[] = {
 	/* regbase */
 	[0] = {
@@ -276,7 +276,7 @@ struct platform_device pxa168_device_u2o = {
 };
 #endif /* CONFIG_USB_MV_UDC */
 
-#ifdef CONFIG_USB_EHCI_MV_U2O
+#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
 struct resource pxa168_u2oehci_resources[] = {
 	/* regbase */
 	[0] = {
@@ -312,7 +312,7 @@ struct platform_device pxa168_device_u2oehci = {
 };
 #endif
 
-#if defined(CONFIG_USB_MV_OTG)
+#if IS_ENABLED(CONFIG_USB_MV_OTG)
 struct resource pxa168_u2ootg_resources[] = {
 	/* regbase */
 	[0] = {
diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h
deleted file mode 100644
index 70c9f1d88c02..000000000000
--- a/arch/arm/mach-mmp/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/timex.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifdef CONFIG_CPU_MMP2
-#define CLOCK_TICK_RATE		6500000
-#else
-#define CLOCK_TICK_RATE		3250000
-#endif
diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c
index 461a191a32d2..43b1a516957f 100644
--- a/arch/arm/mach-mmp/pm-mmp2.c
+++ b/arch/arm/mach-mmp/pm-mmp2.c
@@ -27,22 +27,8 @@
 
 int mmp2_set_wake(struct irq_data *d, unsigned int on)
 {
-	int irq = d->irq;
-	struct irq_desc *desc = irq_to_desc(irq);
 	unsigned long data = 0;
-
-	if (unlikely(irq >= nr_irqs)) {
-		pr_err("IRQ nubmers are out of boundary!\n");
-		return -EINVAL;
-	}
-
-	if (on) {
-		if (desc->action)
-			desc->action->flags |= IRQF_NO_SUSPEND;
-	} else {
-		if (desc->action)
-			desc->action->flags &= ~IRQF_NO_SUSPEND;
-	}
+	int irq = d->irq;
 
 	/* enable wakeup sources */
 	switch (irq) {
diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c
index 48981ca801a5..04c9daf9f8d7 100644
--- a/arch/arm/mach-mmp/pm-pxa910.c
+++ b/arch/arm/mach-mmp/pm-pxa910.c
@@ -27,22 +27,8 @@
 
 int pxa910_set_wake(struct irq_data *data, unsigned int on)
 {
-	int irq = data->irq;
-	struct irq_desc *desc = irq_to_desc(data->irq);
 	uint32_t awucrm = 0, apcr = 0;
-
-	if (unlikely(irq >= nr_irqs)) {
-		pr_err("IRQ nubmers are out of boundary!\n");
-		return -EINVAL;
-	}
-
-	if (on) {
-		if (desc->action)
-			desc->action->flags |= IRQF_NO_SUSPEND;
-	} else {
-		if (desc->action)
-			desc->action->flags &= ~IRQF_NO_SUSPEND;
-	}
+	int irq = data->irq;
 
 	/* setting wakeup sources */
 	switch (irq) {
@@ -115,9 +101,11 @@ int pxa910_set_wake(struct irq_data *data, unsigned int on)
 		if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) {
 			awucrm = MPMU_AWUCRM_WAKEUP(2);
 			apcr |= MPMU_APCR_SLPWP2;
-		} else
+		} else {
+			/* FIXME: This should return a proper error code ! */
 			printk(KERN_ERR "Error: no defined wake up source irq: %d\n",
 				irq);
+		}
 	}
 
 	if (on) {
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 024022d91fe3..2756351dbb35 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -39,6 +39,12 @@
 
 #include "clock.h"
 
+#ifdef CONFIG_CPU_MMP2
+#define MMP_CLOCK_FREQ		6500000
+#else
+#define MMP_CLOCK_FREQ		3250000
+#endif
+
 #define TIMERS_VIRT_BASE	TIMERS1_VIRT_BASE
 
 #define MAX_DELTA		(0xfffffffe)
@@ -186,7 +192,7 @@ static void __init timer_config(void)
 
 static struct irqaction timer_irq = {
 	.name		= "timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= timer_interrupt,
 	.dev_id		= &ckevt,
 };
@@ -195,14 +201,14 @@ void __init timer_init(int irq)
 {
 	timer_config();
 
-	sched_clock_register(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
+	sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ);
 
 	ckevt.cpumask = cpumask_of(0);
 
 	setup_irq(irq, &timer_irq);
 
-	clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
-	clockevents_config_and_register(&ckevt, CLOCK_TICK_RATE,
+	clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ);
+	clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ,
 					MIN_DELTA, MAX_DELTA);
 }
 
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index cfadd974f5ce..ac4af81de3ea 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -164,8 +164,8 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = {
 	},
 };
 
-#ifdef CONFIG_USB_SUPPORT
-#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O)
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
 
 static struct mv_usb_platform_data ttc_usb_pdata = {
 	.vbus		= NULL,
@@ -178,14 +178,14 @@ static struct mv_usb_platform_data ttc_usb_pdata = {
 #endif
 #endif
 
-#ifdef CONFIG_MTD_NAND_PXA3xx
+#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
 static struct pxa3xx_nand_platform_data dkb_nand_info = {
 	.enable_arbiter = 1,
 	.num_cs = 1,
 };
 #endif
 
-#ifdef CONFIG_MMP_DISP
+#if IS_ENABLED(CONFIG_MMP_DISP)
 /* path config */
 #define CFG_IOPADMODE(iopad)   (iopad)  /* 0x0 ~ 0xd */
 #define SCLK_SOURCE_SELECT(x)  (x << 30) /* 0x0 ~ 0x3 */
@@ -275,7 +275,7 @@ static void __init ttc_dkb_init(void)
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
-#ifdef CONFIG_MTD_NAND_PXA3xx
+#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
 	pxa910_add_nand(&dkb_nand_info);
 #endif
 
@@ -285,22 +285,22 @@ static void __init ttc_dkb_init(void)
 				 sizeof(struct pxa_gpio_platform_data));
 	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
 
-#ifdef CONFIG_USB_MV_UDC
+#if IS_ENABLED(CONFIG_USB_MV_UDC)
 	pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
 	platform_device_register(&pxa168_device_u2o);
 #endif
 
-#ifdef CONFIG_USB_EHCI_MV_U2O
+#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
 	pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
 	platform_device_register(&pxa168_device_u2oehci);
 #endif
 
-#ifdef CONFIG_USB_MV_OTG
+#if IS_ENABLED(CONFIG_USB_MV_OTG)
 	pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
 	platform_device_register(&pxa168_device_u2ootg);
 #endif
 
-#ifdef CONFIG_MMP_DISP
+#if IS_ENABLED(CONFIG_MMP_DISP)
 	add_disp();
 #endif
 }
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index 3795ae28a613..82a4ba8578a2 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -1,15 +1,10 @@
 config ARCH_MOXART
-	bool "MOXA ART SoC" if ARCH_MULTI_V4T
+	bool "MOXA ART SoC" if ARCH_MULTI_V4
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
-	select USE_OF
-	select CLKSRC_OF
 	select CLKSRC_MMIO
-	select HAVE_CLK
-	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
 	select PHYLIB if NETDEVICES
 	help
 	  Say Y here if you want to run your kernel on hardware with a
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 9625cf378931..9b26976fb084 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,50 +1,9 @@
-config ARCH_MSM
-	bool
-
-config ARCH_MSM_DT
-	bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7
-	select ARCH_MSM
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKSRC_OF
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Qualcomm's devicetree based MSM systems.
-
 if ARCH_MSM
 
-menu "Qualcomm MSM SoC Selection"
-	depends on ARCH_MSM_DT
-
-config ARCH_MSM8X60
-	bool "Enable support for MSM8X60"
-	select ARM_GIC
-	select CPU_V7
-	select HAVE_SMP
-	select MSM_SCM if SMP
-	select MSM_TIMER
-
-config ARCH_MSM8960
-	bool "Enable support for MSM8960"
-	select ARM_GIC
-	select CPU_V7
-	select HAVE_SMP
-	select MSM_SCM if SMP
-	select MSM_TIMER
-
-config ARCH_MSM8974
-	bool "Enable support for MSM8974"
-	select ARM_GIC
-	select CPU_V7
-	select HAVE_ARM_ARCH_TIMER
-	select HAVE_SMP
-	select MSM_SCM if SMP
-
-endmenu
-
 choice
 	prompt "Qualcomm MSM SoC Type"
 	default ARCH_MSM7X00A
-	depends on ARCH_MSM_NODT
+	depends on ARCH_MSM
 
 config ARCH_MSM7X00A
 	bool "MSM7x00A / MSM7x01A"
@@ -54,7 +13,7 @@ config ARCH_MSM7X00A
 	select MACH_TROUT if !MACH_HALIBUT
 	select MSM_PROC_COMM
 	select MSM_SMD
-	select MSM_TIMER
+	select CLKSRC_QCOM
 	select MSM_SMD_PKG3
 
 config ARCH_MSM7X30
@@ -66,7 +25,7 @@ config ARCH_MSM7X30
 	select MSM_GPIOMUX
 	select MSM_PROC_COMM
 	select MSM_SMD
-	select MSM_TIMER
+	select CLKSRC_QCOM
 	select MSM_VIC
 
 config ARCH_QSD8X50
@@ -78,14 +37,11 @@ config ARCH_QSD8X50
 	select MSM_GPIOMUX
 	select MSM_PROC_COMM
 	select MSM_SMD
-	select MSM_TIMER
+	select CLKSRC_QCOM
 	select MSM_VIC
 
 endchoice
 
-config MSM_HAS_DEBUG_UART_HS
-	bool
-
 config MSM_SOC_REV_A
 	bool
 
@@ -99,7 +55,7 @@ config  MSM_VIC
 	bool
 
 menu "Qualcomm MSM Board Type"
-	depends on ARCH_MSM_NODT
+	depends on ARCH_MSM
 
 config MACH_HALIBUT
 	depends on ARCH_MSM
@@ -153,7 +109,4 @@ config MSM_GPIOMUX
 config MSM_SCM
 	bool
 
-config MSM_TIMER
-	bool
-
 endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 8e307a10d3c3..27c078a568df 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,4 +1,3 @@
-obj-$(CONFIG_MSM_TIMER) += timer.o
 obj-$(CONFIG_MSM_PROC_COMM) += clock.o
 
 obj-$(CONFIG_MSM_VIC) += irq-vic.o
@@ -14,18 +13,11 @@ obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
 
 obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
-
-CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
-
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 
 obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
 obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
 obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
 obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index a77529887cbc..61bfe584a9d7 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -83,11 +83,6 @@ static void __init halibut_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
-static void __init halibut_fixup(struct tag *tags, char **cmdline,
-				 struct meminfo *mi)
-{
-}
-
 static void __init halibut_map_io(void)
 {
 	msm_map_common_io();
@@ -100,7 +95,6 @@ static void __init halibut_init_late(void)
 
 MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
 	.atag_offset	= 0x100,
-	.fixup		= halibut_fixup,
 	.map_io		= halibut_map_io,
 	.init_early	= halibut_init_early,
 	.init_irq	= halibut_init_irq,
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index 7d9981cb400e..873c3ca3cd7e 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/memblock.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -52,16 +53,10 @@ static void __init mahimahi_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
-static void __init mahimahi_fixup(struct tag *tags, char **cmdline,
-				  struct meminfo *mi)
+static void __init mahimahi_fixup(struct tag *tags, char **cmdline)
 {
-	mi->nr_banks = 2;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
-	mi->bank[0].size = (219*1024*1024);
-	mi->bank[1].start = MSM_HIGHMEM_BASE;
-	mi->bank[1].node = PHYS_TO_NID(MSM_HIGHMEM_BASE);
-	mi->bank[1].size = MSM_HIGHMEM_SIZE;
+	memblock_add(PHYS_OFFSET, 219*SZ_1M);
+	memblock_add(MSM_HIGHMEM_BASE, MSM_HIGHMEM_SIZE);
 }
 
 static void __init mahimahi_map_io(void)
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 46de789ad3ae..245884319d2e 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -40,8 +40,7 @@
 #include "proc_comm.h"
 #include "common.h"
 
-static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
-		struct meminfo *mi)
+static void __init msm7x30_fixup(struct tag *tag, char **cmdline)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
@@ -95,7 +94,7 @@ static int hsusb_phy_clk_reset(struct clk *phy_clk)
 
 static struct msm_otg_platform_data msm_otg_pdata = {
 	.phy_init_seq		= hsusb_phy_init_seq,
-	.mode                   = USB_PERIPHERAL,
+	.mode                   = USB_DR_MODE_PERIPHERAL,
 	.otg_control		= OTG_PHY_CONTROL,
 	.link_clk_reset		= hsusb_link_clk_reset,
 	.phy_clk_reset		= hsusb_phy_clk_reset,
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 9169ec324a43..4c748616ef47 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -116,7 +116,7 @@ static int hsusb_phy_clk_reset(struct clk *phy_clk)
 
 static struct msm_otg_platform_data msm_otg_pdata = {
 	.phy_init_seq		= hsusb_phy_init_seq,
-	.mode                   = USB_PERIPHERAL,
+	.mode                   = USB_DR_MODE_PERIPHERAL,
 	.otg_control		= OTG_PHY_CONTROL,
 	.link_clk_reset		= hsusb_link_clk_reset,
 	.phy_clk_reset		= hsusb_phy_clk_reset,
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 327605174d63..e50967926dcd 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -35,6 +35,7 @@
 
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/memblock.h>
 
 #include "gpio_chip.h"
 #include "board-sapphire.h"
@@ -74,22 +75,18 @@ static struct map_desc sapphire_io_desc[] __initdata = {
 	}
 };
 
-static void __init sapphire_fixup(struct tag *tags, char **cmdline,
-				  struct meminfo *mi)
+static void __init sapphire_fixup(struct tag *tags, char **cmdline)
 {
 	int smi_sz = parse_tag_smi((const struct tag *)tags);
 
-	mi->nr_banks = 1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
 	if (smi_sz == 32) {
-		mi->bank[0].size = (84*1024*1024);
+		memblock_add(PHYS_OFFSET, 84*SZ_1M);
 	} else if (smi_sz == 64) {
-		mi->bank[0].size = (101*1024*1024);
+		memblock_add(PHYS_OFFSET, 101*SZ_1M);
 	} else {
+		memblock_add(PHYS_OFFSET, 101*SZ_1M);
 		/* Give a default value when not get smi size */
 		smi_sz = 64;
-		mi->bank[0].size = (101*1024*1024);
 	}
 }
 
diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c
index 87e1d01edecc..2c25050209ce 100644
--- a/arch/arm/mach-msm/board-trout-gpio.c
+++ b/arch/arm/mach-msm/board-trout-gpio.c
@@ -89,7 +89,7 @@ static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 			.base		  = base_gpio,			\
 			.ngpio		  = 8,				\
 		},							\
-		.reg = (void *) reg_num + TROUT_CPLD_BASE,		\
+		.reg = reg_num + TROUT_CPLD_BASE,			\
 		.shadow = shadow_val,					\
 	}
 
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 015d544aa017..f72b07de2152 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/clkdev.h>
+#include <linux/memblock.h>
 
 #include <asm/system_info.h>
 #include <asm/mach-types.h>
@@ -55,12 +56,9 @@ static void __init trout_init_irq(void)
 	msm_init_irq();
 }
 
-static void __init trout_fixup(struct tag *tags, char **cmdline,
-			       struct meminfo *mi)
+static void __init trout_fixup(struct tag *tags, char **cmdline)
 {
-	mi->nr_banks = 1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = (101*1024*1024);
+	memblock_add(PHYS_OFFSET, 101*SZ_1M);
 }
 
 static void __init trout_init(void)
@@ -78,7 +76,7 @@ static void __init trout_init(void)
 
 static struct map_desc trout_io_desc[] __initdata = {
 	{
-		.virtual = TROUT_CPLD_BASE,
+		.virtual = (unsigned long)TROUT_CPLD_BASE,
 		.pfn     = __phys_to_pfn(TROUT_CPLD_START),
 		.length  = TROUT_CPLD_SIZE,
 		.type    = MT_DEVICE_NONSHARED
diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h
index b2379ede43bc..adb757abbb92 100644
--- a/arch/arm/mach-msm/board-trout.h
+++ b/arch/arm/mach-msm/board-trout.h
@@ -58,7 +58,7 @@
 #define TROUT_4_TP_LS_EN    19
 #define TROUT_5_TP_LS_EN    1
 
-#define TROUT_CPLD_BASE   0xE8100000
+#define TROUT_CPLD_BASE   IOMEM(0xE8100000)
 #define TROUT_CPLD_START  0x98000000
 #define TROUT_CPLD_SIZE   SZ_4K
 
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
index 33c7725adae2..572479a3c7be 100644
--- a/arch/arm/mach-msm/common.h
+++ b/arch/arm/mach-msm/common.h
@@ -23,9 +23,6 @@ extern void msm_map_qsd8x50_io(void);
 extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
 					  unsigned int mtype, void *caller);
 
-extern struct smp_operations msm_smp_ops;
-extern void msm_cpu_die(unsigned int cpu);
-
 struct msm_mmc_platform_data;
 
 extern void msm_add_devices(void);
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index f8f6adfa07c6..fb9762464718 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/completion.h>
+#include <linux/module.h>
 #include <mach/dma.h>
 #include <mach/msm_iomap.h>
 
@@ -77,6 +78,7 @@ void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful)
 {
 	writel((graceful << 31), DMOV_FLUSH0(id));
 }
+EXPORT_SYMBOL_GPL(msm_dmov_stop_cmd);
 
 void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
 {
@@ -115,6 +117,7 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
 	}
 	spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
 }
+EXPORT_SYMBOL_GPL(msm_dmov_enqueue_cmd);
 
 struct msm_dmov_exec_cmdptr_cmd {
 	struct msm_dmov_cmd dmov_cmd;
diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S
deleted file mode 100644
index 6c62c3f82fe6..000000000000
--- a/arch/arm/mach-msm/headsmp.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/headsmp.S
- *
- *  Copyright (c) 2003 ARM Limited
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-/*
- * MSM specific entry point for secondary CPUs.  This provides
- * a "holding pen" into which all secondary cores are held until we're
- * ready for them to initialise.
- */
-ENTRY(msm_secondary_startup)
-	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #15
-	adr	r4, 1f
-	ldmia	r4, {r5, r6}
-	sub	r4, r4, r5
-	add	r6, r6, r4
-pen:	ldr	r7, [r6]
-	cmp	r7, r0
-	bne	pen
-
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
-ENDPROC(msm_secondary_startup)
-
-	.align
-1:	.long	.
-	.long	pen_release
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
deleted file mode 100644
index 326a87261f9a..000000000000
--- a/arch/arm/mach-msm/hotplug.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/smp_plat.h>
-
-#include "common.h"
-
-static inline void cpu_enter_lowpower(void)
-{
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-}
-
-static inline void platform_do_lowpower(unsigned int cpu)
-{
-	/* Just enter wfi for now. TODO: Properly shut off the cpu. */
-	for (;;) {
-		/*
-		 * here's the WFI
-		 */
-		asm("wfi"
-		    :
-		    :
-		    : "memory", "cc");
-
-		if (pen_release == cpu_logical_map(cpu)) {
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		}
-
-		/*
-		 * getting here, means that we have come out of WFI without
-		 * having been woken up - this shouldn't happen
-		 *
-		 * The trouble is, letting people know about this is not really
-		 * possible, since we are currently running incoherently, and
-		 * therefore cannot safely call printk() or anything else
-		 */
-		pr_debug("CPU%u: spurious wakeup call\n", cpu);
-	}
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void __ref msm_cpu_die(unsigned int cpu)
-{
-	/*
-	 * we're ready for shutdown now, so do it
-	 */
-	cpu_enter_lowpower();
-	platform_do_lowpower(cpu);
-
-	/*
-	 * bring this CPU back into the world of cache
-	 * coherency, and then restore interrupts
-	 */
-	cpu_leave_lowpower();
-}
diff --git a/arch/arm/mach-msm/include/mach/timex.h b/arch/arm/mach-msm/include/mach/timex.h
deleted file mode 100644
index a62e6b215aec..000000000000
--- a/arch/arm/mach-msm/include/mach/timex.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-msm/include/mach/timex.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_TIMEX_H
-#define __ASM_ARCH_MSM_TIMEX_H
-
-#define CLOCK_TICK_RATE		1000000
-
-#endif
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index adc8971c7266..34e09474636d 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -78,8 +78,10 @@ void __init msm_map_common_io(void)
 	asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
 #if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
 		defined(CONFIG_DEBUG_MSM_UART3)
+#ifdef CONFIG_MMU
 	debug_ll_addr(&msm_io_desc[size - 1].pfn,
 		      &msm_io_desc[size - 1].virtual);
+#endif
 	msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn);
 #endif
 	iotable_init(msm_io_desc, size);
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
deleted file mode 100644
index f10a1f58fde9..000000000000
--- a/arch/arm/mach-msm/platsmp.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *  Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-#include <asm/mach-types.h>
-#include <asm/smp_plat.h>
-
-#include "scm-boot.h"
-#include "common.h"
-
-#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
-#define SCSS_CPU1CORE_RESET 0xD80
-#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
-
-extern void msm_secondary_startup(void);
-
-static DEFINE_SPINLOCK(boot_lock);
-
-static inline int get_core_count(void)
-{
-	/* 1 + the PART[1:0] field of MIDR */
-	return ((read_cpuid_id() >> 4) & 3) + 1;
-}
-
-static void msm_secondary_init(unsigned int cpu)
-{
-	/*
-	 * let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	pen_release = -1;
-	smp_wmb();
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-static void prepare_cold_cpu(unsigned int cpu)
-{
-	int ret;
-	ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup),
-				SCM_FLAG_COLDBOOT_CPU1);
-	if (ret == 0) {
-		void __iomem *sc1_base_ptr;
-		sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
-		if (sc1_base_ptr) {
-			writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
-			writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
-			writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
-			iounmap(sc1_base_ptr);
-		}
-	} else
-		printk(KERN_DEBUG "Failed to set secondary core boot "
-				  "address\n");
-}
-
-static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	unsigned long timeout;
-	static int cold_boot_done;
-
-	/* Only need to bring cpu out of reset this way once */
-	if (cold_boot_done == false) {
-		prepare_cold_cpu(cpu);
-		cold_boot_done = true;
-	}
-
-	/*
-	 * set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
-	 * The secondary processor is waiting to be released from
-	 * the holding pen - release it, then wait for it to flag
-	 * that it has been released by resetting pen_release.
-	 *
-	 * Note that "pen_release" is the hardware CPU ID, whereas
-	 * "cpu" is Linux's internal ID.
-	 */
-	pen_release = cpu_logical_map(cpu);
-	sync_cache_w(&pen_release);
-
-	/*
-	 * Send the secondary CPU a soft interrupt, thereby causing
-	 * the boot monitor to read the system wide flags register,
-	 * and branch to the address found there.
-	 */
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		smp_rmb();
-		if (pen_release == -1)
-			break;
-
-		udelay(10);
-	}
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return pen_release != -1 ? -ENOSYS : 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system. The msm8x60
- * does not support the ARM SCU, so just set the possible cpu mask to
- * NR_CPUS.
- */
-static void __init msm_smp_init_cpus(void)
-{
-	unsigned int i, ncores = get_core_count();
-
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
-{
-}
-
-struct smp_operations msm_smp_ops __initdata = {
-	.smp_init_cpus		= msm_smp_init_cpus,
-	.smp_prepare_cpus	= msm_smp_prepare_cpus,
-	.smp_secondary_init	= msm_secondary_init,
-	.smp_boot_secondary	= msm_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_die		= msm_cpu_die,
-#endif
-};
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
deleted file mode 100644
index fd1644987534..000000000000
--- a/arch/arm/mach-msm/timer.c
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/cpu.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/sched_clock.h>
-
-#include <asm/mach/time.h>
-
-#include "common.h"
-
-#define TIMER_MATCH_VAL			0x0000
-#define TIMER_COUNT_VAL			0x0004
-#define TIMER_ENABLE			0x0008
-#define TIMER_ENABLE_CLR_ON_MATCH_EN	BIT(1)
-#define TIMER_ENABLE_EN			BIT(0)
-#define TIMER_CLEAR			0x000C
-#define DGT_CLK_CTL			0x10
-#define DGT_CLK_CTL_DIV_4		0x3
-#define TIMER_STS_GPT0_CLR_PEND		BIT(10)
-
-#define GPT_HZ 32768
-
-#define MSM_DGT_SHIFT 5
-
-static void __iomem *event_base;
-static void __iomem *sts_base;
-
-static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-	/* Stop the timer tick */
-	if (evt->mode == CLOCK_EVT_MODE_ONESHOT) {
-		u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
-		ctrl &= ~TIMER_ENABLE_EN;
-		writel_relaxed(ctrl, event_base + TIMER_ENABLE);
-	}
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static int msm_timer_set_next_event(unsigned long cycles,
-				    struct clock_event_device *evt)
-{
-	u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
-
-	ctrl &= ~TIMER_ENABLE_EN;
-	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
-
-	writel_relaxed(ctrl, event_base + TIMER_CLEAR);
-	writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
-
-	if (sts_base)
-		while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND)
-			cpu_relax();
-
-	writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
-	return 0;
-}
-
-static void msm_timer_set_mode(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
-{
-	u32 ctrl;
-
-	ctrl = readl_relaxed(event_base + TIMER_ENABLE);
-	ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Timer is enabled in set_next_event */
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		break;
-	}
-	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
-}
-
-static struct clock_event_device __percpu *msm_evt;
-
-static void __iomem *source_base;
-
-static notrace cycle_t msm_read_timer_count(struct clocksource *cs)
-{
-	return readl_relaxed(source_base + TIMER_COUNT_VAL);
-}
-
-static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
-{
-	/*
-	 * Shift timer count down by a constant due to unreliable lower bits
-	 * on some targets.
-	 */
-	return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
-}
-
-static struct clocksource msm_clocksource = {
-	.name	= "dg_timer",
-	.rating	= 300,
-	.read	= msm_read_timer_count,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int msm_timer_irq;
-static int msm_timer_has_ppi;
-
-static int msm_local_timer_setup(struct clock_event_device *evt)
-{
-	int cpu = smp_processor_id();
-	int err;
-
-	evt->irq = msm_timer_irq;
-	evt->name = "msm_timer";
-	evt->features = CLOCK_EVT_FEAT_ONESHOT;
-	evt->rating = 200;
-	evt->set_mode = msm_timer_set_mode;
-	evt->set_next_event = msm_timer_set_next_event;
-	evt->cpumask = cpumask_of(cpu);
-
-	clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff);
-
-	if (msm_timer_has_ppi) {
-		enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
-	} else {
-		err = request_irq(evt->irq, msm_timer_interrupt,
-				IRQF_TIMER | IRQF_NOBALANCING |
-				IRQF_TRIGGER_RISING, "gp_timer", evt);
-		if (err)
-			pr_err("request_irq failed\n");
-	}
-
-	return 0;
-}
-
-static void msm_local_timer_stop(struct clock_event_device *evt)
-{
-	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
-	disable_percpu_irq(evt->irq);
-}
-
-static int msm_timer_cpu_notify(struct notifier_block *self,
-					   unsigned long action, void *hcpu)
-{
-	/*
-	 * Grab cpu pointer in each case to avoid spurious
-	 * preemptible warnings
-	 */
-	switch (action & ~CPU_TASKS_FROZEN) {
-	case CPU_STARTING:
-		msm_local_timer_setup(this_cpu_ptr(msm_evt));
-		break;
-	case CPU_DYING:
-		msm_local_timer_stop(this_cpu_ptr(msm_evt));
-		break;
-	}
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block msm_timer_cpu_nb = {
-	.notifier_call = msm_timer_cpu_notify,
-};
-
-static u64 notrace msm_sched_clock_read(void)
-{
-	return msm_clocksource.read(&msm_clocksource);
-}
-
-static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
-				  bool percpu)
-{
-	struct clocksource *cs = &msm_clocksource;
-	int res = 0;
-
-	msm_timer_irq = irq;
-	msm_timer_has_ppi = percpu;
-
-	msm_evt = alloc_percpu(struct clock_event_device);
-	if (!msm_evt) {
-		pr_err("memory allocation failed for clockevents\n");
-		goto err;
-	}
-
-	if (percpu)
-		res = request_percpu_irq(irq, msm_timer_interrupt,
-					 "gp_timer", msm_evt);
-
-	if (res) {
-		pr_err("request_percpu_irq failed\n");
-	} else {
-		res = register_cpu_notifier(&msm_timer_cpu_nb);
-		if (res) {
-			free_percpu_irq(irq, msm_evt);
-			goto err;
-		}
-
-		/* Immediately configure the timer on the boot CPU */
-		msm_local_timer_setup(__this_cpu_ptr(msm_evt));
-	}
-
-err:
-	writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
-	res = clocksource_register_hz(cs, dgt_hz);
-	if (res)
-		pr_err("clocksource_register failed\n");
-	sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
-}
-
-#ifdef CONFIG_OF
-static void __init msm_dt_timer_init(struct device_node *np)
-{
-	u32 freq;
-	int irq;
-	struct resource res;
-	u32 percpu_offset;
-	void __iomem *base;
-	void __iomem *cpu0_base;
-
-	base = of_iomap(np, 0);
-	if (!base) {
-		pr_err("Failed to map event base\n");
-		return;
-	}
-
-	/* We use GPT0 for the clockevent */
-	irq = irq_of_parse_and_map(np, 1);
-	if (irq <= 0) {
-		pr_err("Can't get irq\n");
-		return;
-	}
-
-	/* We use CPU0's DGT for the clocksource */
-	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
-		percpu_offset = 0;
-
-	if (of_address_to_resource(np, 0, &res)) {
-		pr_err("Failed to parse DGT resource\n");
-		return;
-	}
-
-	cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res));
-	if (!cpu0_base) {
-		pr_err("Failed to map source base\n");
-		return;
-	}
-
-	if (of_property_read_u32(np, "clock-frequency", &freq)) {
-		pr_err("Unknown frequency\n");
-		return;
-	}
-
-	event_base = base + 0x4;
-	sts_base = base + 0x88;
-	source_base = cpu0_base + 0x24;
-	freq /= 4;
-	writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL);
-
-	msm_timer_init(freq, 32, irq, !!percpu_offset);
-}
-CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
-CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
-#endif
-
-static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
-				u32 sts)
-{
-	void __iomem *base;
-
-	base = ioremap(addr, SZ_256);
-	if (!base) {
-		pr_err("Failed to map timer base\n");
-		return -ENOMEM;
-	}
-	event_base = base + event;
-	source_base = base + source;
-	if (sts)
-		sts_base = base + sts;
-
-	return 0;
-}
-
-void __init msm7x01_timer_init(void)
-{
-	struct clocksource *cs = &msm_clocksource;
-
-	if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0))
-		return;
-	cs->read = msm_read_timer_count_shift;
-	cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
-	/* 600 KHz */
-	msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7,
-			false);
-}
-
-void __init msm7x30_timer_init(void)
-{
-	if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80))
-		return;
-	msm_timer_init(24576000 / 4, 32, 1, false);
-}
-
-void __init qsd8x50_timer_init(void)
-{
-	if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34))
-		return;
-	msm_timer_init(19200000 / 4, 32, 7, false);
-}
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 75062eff2494..e6ac679bece9 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -15,11 +15,11 @@
 #include <linux/ata_platform.h>
 #include <linux/clk-provider.h>
 #include <linux/ethtool.h>
+#include <asm/hardware/cache-feroceon-l2.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <mach/mv78xx0.h>
 #include <mach/bridge-regs.h>
-#include <plat/cache-feroceon-l2.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include <plat/time.h>
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
index 5f03484584d4..e20d6da234a6 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -15,6 +15,7 @@
 #define L2_WRITETHROUGH		0x00020000
 
 #define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
+#define RSTOUTn_MASK_PHYS	(BRIDGE_PHYS_BASE + 0x0108)
 #define SOFT_RESET_OUT_EN	0x00000004
 
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
diff --git a/arch/arm/mach-mv78xx0/include/mach/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h
deleted file mode 100644
index 0e8c443c723a..000000000000
--- a/arch/arm/mach-mv78xx0/include/mach/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 5e269d7263ce..6090b9eb00c8 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,51 +1,102 @@
 config ARCH_MVEBU
-	bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
+	bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
 	select PINCTRL
 	select PLAT_ORION
-	select SPARSE_IRQ
-	select CLKDEV_LOOKUP
+	select SOC_BUS
 	select MVEBU_MBUS
 	select ZONE_DMA if ARM_LPAE
 	select ARCH_REQUIRE_GPIOLIB
-	select MIGHT_HAVE_PCI
 	select PCI_QUIRKS if PCI
 
 if ARCH_MVEBU
 
-menu "Marvell SOC with device tree"
+menu "Marvell EBU SoC variants"
 
-config MACH_ARMADA_370_XP
+config MACH_MVEBU_V7
 	bool
 	select ARMADA_370_XP_TIMER
-	select HAVE_SMP
 	select CACHE_L2X0
-	select CPU_PJ4B
 
 config MACH_ARMADA_370
-	bool "Marvell Armada 370 boards"
+	bool "Marvell Armada 370 boards" if ARCH_MULTI_V7
 	select ARMADA_370_CLK
-	select MACH_ARMADA_370_XP
+	select CPU_PJ4B
+	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_370
 	help
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada 370 SoC with device tree.
 
+config MACH_ARMADA_375
+	bool "Marvell Armada 375 boards" if ARCH_MULTI_V7
+	select ARM_ERRATA_720789
+	select ARM_ERRATA_753970
+	select ARM_GIC
+	select ARMADA_375_CLK
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select HAVE_SMP
+	select MACH_MVEBU_V7
+	select PINCTRL_ARMADA_375
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada 375 SoC with device tree.
+
+config MACH_ARMADA_38X
+	bool "Marvell Armada 380/385 boards" if ARCH_MULTI_V7
+	select ARM_ERRATA_720789
+	select ARM_ERRATA_753970
+	select ARM_GIC
+	select ARMADA_38X_CLK
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select HAVE_SMP
+	select MACH_MVEBU_V7
+	select PINCTRL_ARMADA_38X
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada 380/385 SoC with device tree.
+
 config MACH_ARMADA_XP
-	bool "Marvell Armada XP boards"
+	bool "Marvell Armada XP boards" if ARCH_MULTI_V7
 	select ARMADA_XP_CLK
-	select MACH_ARMADA_370_XP
+	select CPU_PJ4B
+	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_XP
 	help
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada XP SoC with device tree.
 
+config MACH_DOVE
+	bool "Marvell Dove boards" if ARCH_MULTI_V7
+	select CACHE_L2X0
+	select CPU_PJ4
+	select DOVE_CLK
+	select ORION_IRQCHIP
+	select ORION_TIMER
+	select PINCTRL_DOVE
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Dove using flattened device tree.
+
+config MACH_KIRKWOOD
+	bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
+	select ARCH_HAS_CPUFREQ
+	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
+	select KIRKWOOD_CLK
+	select ORION_IRQCHIP
+	select ORION_TIMER
+	select PCI
+	select PCI_QUIRKS
+	select PINCTRL_KIRKWOOD
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Kirkwood device tree.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 878aebe98dcc..2ecb828e4a8b 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -2,9 +2,15 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-orion/include
 
 AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
+CFLAGS_pmsu.o			:= -march=armv7-a
 
 obj-y				 += system-controller.o mvebu-soc-id.o
-obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
-obj-$(CONFIG_ARCH_MVEBU)	 += coherency.o coherency_ll.o pmsu.o
-obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)        += hotplug.o
+
+ifeq ($(CONFIG_MACH_MVEBU_V7),y)
+obj-y				 += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o
+obj-$(CONFIG_SMP)		 += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
+obj-$(CONFIG_HOTPLUG_CPU)	 += hotplug.o
+endif
+
+obj-$(CONFIG_MACH_DOVE)		 += dove.o
+obj-$(CONFIG_MACH_KIRKWOOD)	 += kirkwood.o kirkwood-pm.o
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
deleted file mode 100644
index f6c9d1d85c14..000000000000
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Device Tree support for Armada 370 and XP platforms.
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk-provider.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/io.h>
-#include <linux/clocksource.h>
-#include <linux/dma-mapping.h>
-#include <linux/mbus.h>
-#include <linux/slab.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include "armada-370-xp.h"
-#include "common.h"
-#include "coherency.h"
-#include "mvebu-soc-id.h"
-
-static void __init armada_370_xp_map_io(void)
-{
-	debug_ll_io_init();
-}
-
-static void __init armada_370_xp_timer_and_clk_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-	coherency_init();
-	BUG_ON(mvebu_mbus_dt_init());
-#ifdef CONFIG_CACHE_L2X0
-	l2x0_of_init(0, ~0UL);
-#endif
-}
-
-static void __init i2c_quirk(void)
-{
-	struct device_node *np;
-	u32 dev, rev;
-
-	/*
-	 * Only revisons more recent than A0 support the offload
-	 * mechanism. We can exit only if we are sure that we can
-	 * get the SoC revision and it is more recent than A0.
-	 */
-	if (mvebu_get_soc_id(&rev, &dev) == 0 && dev > MV78XX0_A0_REV)
-		return;
-
-	for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") {
-		struct property *new_compat;
-
-		new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL);
-
-		new_compat->name = kstrdup("compatible", GFP_KERNEL);
-		new_compat->length = sizeof("marvell,mv78230-a0-i2c");
-		new_compat->value = kstrdup("marvell,mv78230-a0-i2c",
-						GFP_KERNEL);
-
-		of_update_property(np, new_compat);
-	}
-	return;
-}
-
-static void __init armada_370_xp_dt_init(void)
-{
-	if (of_machine_is_compatible("plathome,openblocks-ax3-4"))
-		i2c_quirk();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const armada_370_xp_dt_compat[] = {
-	"marvell,armada-370-xp",
-	NULL,
-};
-
-DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)")
-	.smp		= smp_ops(armada_xp_smp_ops),
-	.init_machine	= armada_370_xp_dt_init,
-	.map_io		= armada_370_xp_map_io,
-	.init_time	= armada_370_xp_timer_and_clk_init,
-	.restart	= mvebu_restart,
-	.dt_compat	= armada_370_xp_dt_compat,
-MACHINE_END
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index 237c86b83390..c3465f5b1250 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -20,8 +20,6 @@
 
 #define ARMADA_XP_MAX_CPUS 4
 
-void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq);
-void armada_xp_mpic_smp_cpu_init(void);
 void armada_xp_secondary_startup(void);
 extern struct smp_operations armada_xp_smp_ops;
 #endif
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
new file mode 100644
index 000000000000..8bb742fdf5ca
--- /dev/null
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -0,0 +1,219 @@
+/*
+ * Device Tree support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/clocksource.h>
+#include <linux/dma-mapping.h>
+#include <linux/mbus.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/smp_scu.h>
+#include "armada-370-xp.h"
+#include "common.h"
+#include "coherency.h"
+#include "mvebu-soc-id.h"
+
+/*
+ * Enables the SCU when available. Obviously, this is only useful on
+ * Cortex-A based SOCs, not on PJ4B based ones.
+ */
+static void __init mvebu_scu_enable(void)
+{
+	void __iomem *scu_base;
+
+	struct device_node *np =
+		of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+	if (np) {
+		scu_base = of_iomap(np, 0);
+		scu_enable(scu_base);
+		of_node_put(np);
+	}
+}
+
+/*
+ * Early versions of Armada 375 SoC have a bug where the BootROM
+ * leaves an external data abort pending. The kernel is hit by this
+ * data abort as soon as it enters userspace, because it unmasks the
+ * data aborts at this moment. We register a custom abort handler
+ * below to ignore the first data abort to work around this
+ * problem.
+ */
+static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr,
+					struct pt_regs *regs)
+{
+	static int ignore_first;
+
+	if (!ignore_first && fsr == 0x1406) {
+		ignore_first = 1;
+		return 0;
+	}
+
+	return 1;
+}
+
+static void __init mvebu_timer_and_clk_init(void)
+{
+	of_clk_init(NULL);
+	clocksource_of_init();
+	mvebu_scu_enable();
+	coherency_init();
+	BUG_ON(mvebu_mbus_dt_init(coherency_available()));
+
+	if (of_machine_is_compatible("marvell,armada375"))
+		hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
+				"imprecise external abort");
+}
+
+static void __init i2c_quirk(void)
+{
+	struct device_node *np;
+	u32 dev, rev;
+
+	/*
+	 * Only revisons more recent than A0 support the offload
+	 * mechanism. We can exit only if we are sure that we can
+	 * get the SoC revision and it is more recent than A0.
+	 */
+	if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV)
+		return;
+
+	for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") {
+		struct property *new_compat;
+
+		new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL);
+
+		new_compat->name = kstrdup("compatible", GFP_KERNEL);
+		new_compat->length = sizeof("marvell,mv78230-a0-i2c");
+		new_compat->value = kstrdup("marvell,mv78230-a0-i2c",
+						GFP_KERNEL);
+
+		of_update_property(np, new_compat);
+	}
+	return;
+}
+
+#define A375_Z1_THERMAL_FIXUP_OFFSET 0xc
+
+static void __init thermal_quirk(void)
+{
+	struct device_node *np;
+	u32 dev, rev;
+
+	if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
+		return;
+
+	for_each_compatible_node(np, NULL, "marvell,armada375-thermal") {
+		struct property *prop;
+		__be32 newval, *newprop, *oldprop;
+		int len;
+
+		/*
+		 * The register offset is at a wrong location. This quirk
+		 * creates a new reg property as a clone of the previous
+		 * one and corrects the offset.
+		 */
+		oldprop = (__be32 *)of_get_property(np, "reg", &len);
+		if (!oldprop)
+			continue;
+
+		/* Create a duplicate of the 'reg' property */
+		prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+		prop->length = len;
+		prop->name = kstrdup("reg", GFP_KERNEL);
+		prop->value = kzalloc(len, GFP_KERNEL);
+		memcpy(prop->value, oldprop, len);
+
+		/* Fixup the register offset of the second entry */
+		oldprop += 2;
+		newprop = (__be32 *)prop->value + 2;
+		newval = cpu_to_be32(be32_to_cpu(*oldprop) -
+				     A375_Z1_THERMAL_FIXUP_OFFSET);
+		*newprop = newval;
+		of_update_property(np, prop);
+
+		/*
+		 * The thermal controller needs some quirk too, so let's change
+		 * the compatible string to reflect this.
+		 */
+		prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+		prop->name = kstrdup("compatible", GFP_KERNEL);
+		prop->length = sizeof("marvell,armada375-z1-thermal");
+		prop->value = kstrdup("marvell,armada375-z1-thermal",
+						GFP_KERNEL);
+		of_update_property(np, prop);
+	}
+	return;
+}
+
+static void __init mvebu_dt_init(void)
+{
+	if (of_machine_is_compatible("plathome,openblocks-ax3-4"))
+		i2c_quirk();
+	if (of_machine_is_compatible("marvell,a375-db"))
+		thermal_quirk();
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const armada_370_xp_dt_compat[] = {
+	"marvell,armada-370-xp",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.smp		= smp_ops(armada_xp_smp_ops),
+	.init_machine	= mvebu_dt_init,
+	.init_time	= mvebu_timer_and_clk_init,
+	.restart	= mvebu_restart,
+	.dt_compat	= armada_370_xp_dt_compat,
+MACHINE_END
+
+static const char * const armada_375_dt_compat[] = {
+	"marvell,armada375",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_time	= mvebu_timer_and_clk_init,
+	.init_machine	= mvebu_dt_init,
+	.restart	= mvebu_restart,
+	.dt_compat	= armada_375_dt_compat,
+MACHINE_END
+
+static const char * const armada_38x_dt_compat[] = {
+	"marvell,armada380",
+	"marvell,armada385",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_time	= mvebu_timer_and_clk_init,
+	.restart	= mvebu_restart,
+	.dt_compat	= armada_38x_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-mvebu/board.h
index 4c69820e0810..9c7bb4386f8b 100644
--- a/arch/arm/mach-orion5x/include/mach/timex.h
+++ b/arch/arm/mach-mvebu/board.h
@@ -1,11 +1,16 @@
 /*
- * arch/arm/mach-orion5x/include/mach/timex.h
+ * Board functions for Marvell System On Chip
  *
- * Tzachi Perelstein <tzachi@marvell.com>
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#define CLOCK_TICK_RATE		(100 * HZ)
+#ifndef __ARCH_MVEBU_BOARD_H
+#define __ARCH_MVEBU_BOARD_H
+
+#endif
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index 4e9d58148ca7..477202fd39cc 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -17,6 +17,8 @@
  * supplies basic routines for configuring and controlling hardware coherency
  */
 
+#define pr_fmt(fmt) "mvebu-coherency: " fmt
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/of_address.h>
@@ -24,13 +26,19 @@
 #include <linux/smp.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mbus.h>
+#include <linux/clk.h>
+#include <linux/pci.h>
 #include <asm/smp_plat.h>
 #include <asm/cacheflush.h>
+#include <asm/mach/map.h>
 #include "armada-370-xp.h"
 #include "coherency.h"
+#include "mvebu-soc-id.h"
 
 unsigned long coherency_phys_base;
-static void __iomem *coherency_base;
+void __iomem *coherency_base;
 static void __iomem *coherency_cpu_base;
 
 /* Coherency fabric registers */
@@ -38,27 +46,190 @@ static void __iomem *coherency_cpu_base;
 
 #define IO_SYNC_BARRIER_CTL_OFFSET		   0x0
 
+enum {
+	COHERENCY_FABRIC_TYPE_NONE,
+	COHERENCY_FABRIC_TYPE_ARMADA_370_XP,
+	COHERENCY_FABRIC_TYPE_ARMADA_375,
+	COHERENCY_FABRIC_TYPE_ARMADA_380,
+};
+
 static struct of_device_id of_coherency_table[] = {
-	{.compatible = "marvell,coherency-fabric"},
+	{.compatible = "marvell,coherency-fabric",
+	 .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_370_XP },
+	{.compatible = "marvell,armada-375-coherency-fabric",
+	 .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_375 },
+	{.compatible = "marvell,armada-380-coherency-fabric",
+	 .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_380 },
 	{ /* end of list */ },
 };
 
-/* Function defined in coherency_ll.S */
-int ll_set_cpu_coherent(void __iomem *base_addr, unsigned int hw_cpu_id);
+/* Functions defined in coherency_ll.S */
+int ll_enable_coherency(void);
+void ll_add_cpu_to_smp_group(void);
 
-int set_cpu_coherent(unsigned int hw_cpu_id, int smp_group_id)
+int set_cpu_coherent(void)
 {
 	if (!coherency_base) {
-		pr_warn("Can't make CPU %d cache coherent.\n", hw_cpu_id);
+		pr_warn("Can't make current CPU cache coherent.\n");
 		pr_warn("Coherency fabric is not initialized\n");
 		return 1;
 	}
 
-	return ll_set_cpu_coherent(coherency_base, hw_cpu_id);
+	ll_add_cpu_to_smp_group();
+	return ll_enable_coherency();
+}
+
+/*
+ * The below code implements the I/O coherency workaround on Armada
+ * 375. This workaround consists in using the two channels of the
+ * first XOR engine to trigger a XOR transaction that serves as the
+ * I/O coherency barrier.
+ */
+
+static void __iomem *xor_base, *xor_high_base;
+static dma_addr_t coherency_wa_buf_phys[CONFIG_NR_CPUS];
+static void *coherency_wa_buf[CONFIG_NR_CPUS];
+static bool coherency_wa_enabled;
+
+#define XOR_CONFIG(chan)            (0x10 + (chan * 4))
+#define XOR_ACTIVATION(chan)        (0x20 + (chan * 4))
+#define WINDOW_BAR_ENABLE(chan)     (0x240 + ((chan) << 2))
+#define WINDOW_BASE(w)              (0x250 + ((w) << 2))
+#define WINDOW_SIZE(w)              (0x270 + ((w) << 2))
+#define WINDOW_REMAP_HIGH(w)        (0x290 + ((w) << 2))
+#define WINDOW_OVERRIDE_CTRL(chan)  (0x2A0 + ((chan) << 2))
+#define XOR_DEST_POINTER(chan)      (0x2B0 + (chan * 4))
+#define XOR_BLOCK_SIZE(chan)        (0x2C0 + (chan * 4))
+#define XOR_INIT_VALUE_LOW           0x2E0
+#define XOR_INIT_VALUE_HIGH          0x2E4
+
+static inline void mvebu_hwcc_armada375_sync_io_barrier_wa(void)
+{
+	int idx = smp_processor_id();
+
+	/* Write '1' to the first word of the buffer */
+	writel(0x1, coherency_wa_buf[idx]);
+
+	/* Wait until the engine is idle */
+	while ((readl(xor_base + XOR_ACTIVATION(idx)) >> 4) & 0x3)
+		;
+
+	dmb();
+
+	/* Trigger channel */
+	writel(0x1, xor_base + XOR_ACTIVATION(idx));
+
+	/* Poll the data until it is cleared by the XOR transaction */
+	while (readl(coherency_wa_buf[idx]))
+		;
+}
+
+static void __init armada_375_coherency_init_wa(void)
+{
+	const struct mbus_dram_target_info *dram;
+	struct device_node *xor_node;
+	struct property *xor_status;
+	struct clk *xor_clk;
+	u32 win_enable = 0;
+	int i;
+
+	pr_warn("enabling coherency workaround for Armada 375 Z1, one XOR engine disabled\n");
+
+	/*
+	 * Since the workaround uses one XOR engine, we grab a
+	 * reference to its Device Tree node first.
+	 */
+	xor_node = of_find_compatible_node(NULL, NULL, "marvell,orion-xor");
+	BUG_ON(!xor_node);
+
+	/*
+	 * Then we mark it as disabled so that the real XOR driver
+	 * will not use it.
+	 */
+	xor_status = kzalloc(sizeof(struct property), GFP_KERNEL);
+	BUG_ON(!xor_status);
+
+	xor_status->value = kstrdup("disabled", GFP_KERNEL);
+	BUG_ON(!xor_status->value);
+
+	xor_status->length = 8;
+	xor_status->name = kstrdup("status", GFP_KERNEL);
+	BUG_ON(!xor_status->name);
+
+	of_update_property(xor_node, xor_status);
+
+	/*
+	 * And we remap the registers, get the clock, and do the
+	 * initial configuration of the XOR engine.
+	 */
+	xor_base = of_iomap(xor_node, 0);
+	xor_high_base = of_iomap(xor_node, 1);
+
+	xor_clk = of_clk_get_by_name(xor_node, NULL);
+	BUG_ON(!xor_clk);
+
+	clk_prepare_enable(xor_clk);
+
+	dram = mv_mbus_dram_info();
+
+	for (i = 0; i < 8; i++) {
+		writel(0, xor_base + WINDOW_BASE(i));
+		writel(0, xor_base + WINDOW_SIZE(i));
+		if (i < 4)
+			writel(0, xor_base + WINDOW_REMAP_HIGH(i));
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+		writel((cs->base & 0xffff0000) |
+		       (cs->mbus_attr << 8) |
+		       dram->mbus_dram_target_id, xor_base + WINDOW_BASE(i));
+		writel((cs->size - 1) & 0xffff0000, xor_base + WINDOW_SIZE(i));
+
+		win_enable |= (1 << i);
+		win_enable |= 3 << (16 + (2 * i));
+	}
+
+	writel(win_enable, xor_base + WINDOW_BAR_ENABLE(0));
+	writel(win_enable, xor_base + WINDOW_BAR_ENABLE(1));
+	writel(0, xor_base + WINDOW_OVERRIDE_CTRL(0));
+	writel(0, xor_base + WINDOW_OVERRIDE_CTRL(1));
+
+	for (i = 0; i < CONFIG_NR_CPUS; i++) {
+		coherency_wa_buf[i] = kzalloc(PAGE_SIZE, GFP_KERNEL);
+		BUG_ON(!coherency_wa_buf[i]);
+
+		/*
+		 * We can't use the DMA mapping API, since we don't
+		 * have a valid 'struct device' pointer
+		 */
+		coherency_wa_buf_phys[i] =
+			virt_to_phys(coherency_wa_buf[i]);
+		BUG_ON(!coherency_wa_buf_phys[i]);
+
+		/*
+		 * Configure the XOR engine for memset operation, with
+		 * a 128 bytes block size
+		 */
+		writel(0x444, xor_base + XOR_CONFIG(i));
+		writel(128, xor_base + XOR_BLOCK_SIZE(i));
+		writel(coherency_wa_buf_phys[i],
+		       xor_base + XOR_DEST_POINTER(i));
+	}
+
+	writel(0x0, xor_base + XOR_INIT_VALUE_LOW);
+	writel(0x0, xor_base + XOR_INIT_VALUE_HIGH);
+
+	coherency_wa_enabled = true;
 }
 
 static inline void mvebu_hwcc_sync_io_barrier(void)
 {
+	if (coherency_wa_enabled) {
+		mvebu_hwcc_armada375_sync_io_barrier_wa();
+		return;
+	}
+
 	writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET);
 	while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1);
 }
@@ -105,8 +276,8 @@ static struct dma_map_ops mvebu_hwcc_dma_ops = {
 	.set_dma_mask		= arm_dma_set_mask,
 };
 
-static int mvebu_hwcc_platform_notifier(struct notifier_block *nb,
-				       unsigned long event, void *__dev)
+static int mvebu_hwcc_notifier(struct notifier_block *nb,
+			       unsigned long event, void *__dev)
 {
 	struct device *dev = __dev;
 
@@ -117,47 +288,148 @@ static int mvebu_hwcc_platform_notifier(struct notifier_block *nb,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block mvebu_hwcc_platform_nb = {
-	.notifier_call = mvebu_hwcc_platform_notifier,
+static struct notifier_block mvebu_hwcc_nb = {
+	.notifier_call = mvebu_hwcc_notifier,
 };
 
-int __init coherency_init(void)
+static void __init armada_370_coherency_init(struct device_node *np)
+{
+	struct resource res;
+
+	of_address_to_resource(np, 0, &res);
+	coherency_phys_base = res.start;
+	/*
+	 * Ensure secondary CPUs will see the updated value,
+	 * which they read before they join the coherency
+	 * fabric, and therefore before they are coherent with
+	 * the boot CPU cache.
+	 */
+	sync_cache_w(&coherency_phys_base);
+	coherency_base = of_iomap(np, 0);
+	coherency_cpu_base = of_iomap(np, 1);
+	set_cpu_coherent();
+}
+
+/*
+ * This ioremap hook is used on Armada 375/38x to ensure that PCIe
+ * memory areas are mapped as MT_UNCACHED instead of MT_DEVICE. This
+ * is needed as a workaround for a deadlock issue between the PCIe
+ * interface and the cache controller.
+ */
+static void __iomem *
+armada_pcie_wa_ioremap_caller(phys_addr_t phys_addr, size_t size,
+			      unsigned int mtype, void *caller)
+{
+	struct resource pcie_mem;
+
+	mvebu_mbus_get_pcie_mem_aperture(&pcie_mem);
+
+	if (pcie_mem.start <= phys_addr && (phys_addr + size) <= pcie_mem.end)
+		mtype = MT_UNCACHED;
+
+	return __arm_ioremap_caller(phys_addr, size, mtype, caller);
+}
+
+static void __init armada_375_380_coherency_init(struct device_node *np)
+{
+	struct device_node *cache_dn;
+
+	coherency_cpu_base = of_iomap(np, 0);
+	arch_ioremap_caller = armada_pcie_wa_ioremap_caller;
+
+	/*
+	 * Add the PL310 property "arm,io-coherent". This makes sure the
+	 * outer sync operation is not used, which allows to
+	 * workaround the system erratum that causes deadlocks when
+	 * doing PCIe in an SMP situation on Armada 375 and Armada
+	 * 38x.
+	 */
+	for_each_compatible_node(cache_dn, NULL, "arm,pl310-cache") {
+		struct property *p;
+
+		p = kzalloc(sizeof(*p), GFP_KERNEL);
+		p->name = kstrdup("arm,io-coherent", GFP_KERNEL);
+		of_add_property(cache_dn, p);
+	}
+}
+
+static int coherency_type(void)
 {
 	struct device_node *np;
+	const struct of_device_id *match;
 
-	np = of_find_matching_node(NULL, of_coherency_table);
+	np = of_find_matching_node_and_match(NULL, of_coherency_table, &match);
 	if (np) {
-		struct resource res;
-		pr_info("Initializing Coherency fabric\n");
-		of_address_to_resource(np, 0, &res);
-		coherency_phys_base = res.start;
-		/*
-		 * Ensure secondary CPUs will see the updated value,
-		 * which they read before they join the coherency
-		 * fabric, and therefore before they are coherent with
-		 * the boot CPU cache.
-		 */
-		sync_cache_w(&coherency_phys_base);
-		coherency_base = of_iomap(np, 0);
-		coherency_cpu_base = of_iomap(np, 1);
-		set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
-		of_node_put(np);
+		int type = (int) match->data;
+
+		/* Armada 370/XP coherency works in both UP and SMP */
+		if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP)
+			return type;
+
+		/* Armada 375 coherency works only on SMP */
+		else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 && is_smp())
+			return type;
+
+		/* Armada 380 coherency works only on SMP */
+		else if (type == COHERENCY_FABRIC_TYPE_ARMADA_380 && is_smp())
+			return type;
 	}
 
-	return 0;
+	return COHERENCY_FABRIC_TYPE_NONE;
 }
 
-static int __init coherency_late_init(void)
+int coherency_available(void)
+{
+	return coherency_type() != COHERENCY_FABRIC_TYPE_NONE;
+}
+
+int __init coherency_init(void)
 {
+	int type = coherency_type();
 	struct device_node *np;
 
 	np = of_find_matching_node(NULL, of_coherency_table);
-	if (np) {
-		bus_register_notifier(&platform_bus_type,
-				      &mvebu_hwcc_platform_nb);
-		of_node_put(np);
+
+	if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP)
+		armada_370_coherency_init(np);
+	else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 ||
+		 type == COHERENCY_FABRIC_TYPE_ARMADA_380)
+		armada_375_380_coherency_init(np);
+
+	return 0;
+}
+
+static int __init coherency_late_init(void)
+{
+	int type = coherency_type();
+
+	if (type == COHERENCY_FABRIC_TYPE_NONE)
+		return 0;
+
+	if (type == COHERENCY_FABRIC_TYPE_ARMADA_375) {
+		u32 dev, rev;
+
+		if (mvebu_get_soc_id(&dev, &rev) == 0 &&
+		    rev == ARMADA_375_Z1_REV)
+			armada_375_coherency_init_wa();
 	}
+
+	bus_register_notifier(&platform_bus_type,
+			      &mvebu_hwcc_nb);
+
 	return 0;
 }
 
 postcore_initcall(coherency_late_init);
+
+#if IS_ENABLED(CONFIG_PCI)
+static int __init coherency_pci_init(void)
+{
+	if (coherency_available())
+		bus_register_notifier(&pci_bus_type,
+				       &mvebu_hwcc_nb);
+	return 0;
+}
+
+arch_initcall(coherency_pci_init);
+#endif
diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h
index 760226c41353..54cb7607b526 100644
--- a/arch/arm/mach-mvebu/coherency.h
+++ b/arch/arm/mach-mvebu/coherency.h
@@ -15,8 +15,9 @@
 #define __MACH_370_XP_COHERENCY_H
 
 extern unsigned long coherency_phys_base;
+int set_cpu_coherent(void);
 
-int set_cpu_coherent(unsigned int cpu_id, int smp_group_id);
 int coherency_init(void);
+int coherency_available(void);
 
 #endif	/* __MACH_370_XP_COHERENCY_H */
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index ee7598fe75db..510c29e079ca 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -21,38 +21,129 @@
 #define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4
 
 #include <asm/assembler.h>
+#include <asm/cp15.h>
 
 	.text
+/* Returns the coherency base address in r1 (r0 is untouched) */
+ENTRY(ll_get_coherency_base)
+	mrc	p15, 0, r1, c1, c0, 0
+	tst	r1, #CR_M @ Check MMU bit enabled
+	bne	1f
+
+	/*
+	 * MMU is disabled, use the physical address of the coherency
+	 * base address.
+	 */
+	adr	r1, 3f
+	ldr	r3, [r1]
+	ldr	r1, [r1, r3]
+	b	2f
+1:
+	/*
+	 * MMU is enabled, use the virtual address of the coherency
+	 * base address.
+	 */
+	ldr	r1, =coherency_base
+	ldr	r1, [r1]
+2:
+	mov	pc, lr
+ENDPROC(ll_get_coherency_base)
+
 /*
- * r0: Coherency fabric base register address
- * r1: HW CPU id
+ * Returns the coherency CPU mask in r3 (r0 is untouched). This
+ * coherency CPU mask can be used with the coherency fabric
+ * configuration and control registers. Note that the mask is already
+ * endian-swapped as appropriate so that the calling functions do not
+ * have to care about endianness issues while accessing the coherency
+ * fabric registers
  */
-ENTRY(ll_set_cpu_coherent)
-	/* Create bit by cpu index */
-	mov	r3, #(1 << 24)
-	lsl	r1, r3, r1
-ARM_BE8(rev	r1, r1)
-
-	/* Add CPU to SMP group - Atomic */
-	add	r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET
-1:
-	ldrex	r2, [r3]
-	orr	r2, r2, r1
-	strex 	r0, r2, [r3]
-	cmp	r0, #0
-	bne 1b
-
-	/* Enable coherency on CPU - Atomic */
-	add	r3, r3, #ARMADA_XP_CFB_CFG_REG_OFFSET
+ENTRY(ll_get_coherency_cpumask)
+	mrc	15, 0, r3, cr0, cr0, 5
+	and	r3, r3, #15
+	mov	r2, #(1 << 24)
+	lsl	r3, r2, r3
+ARM_BE8(rev	r3, r3)
+	mov	pc, lr
+ENDPROC(ll_get_coherency_cpumask)
+
+/*
+ * ll_add_cpu_to_smp_group(), ll_enable_coherency() and
+ * ll_disable_coherency() use the strex/ldrex instructions while the
+ * MMU can be disabled. The Armada XP SoC has an exclusive monitor
+ * that tracks transactions to Device and/or SO memory and thanks to
+ * that, exclusive transactions are functional even when the MMU is
+ * disabled.
+ */
+
+ENTRY(ll_add_cpu_to_smp_group)
+	/*
+	 * As r0 is not modified by ll_get_coherency_base() and
+	 * ll_get_coherency_cpumask(), we use it to temporarly save lr
+	 * and avoid it being modified by the branch and link
+	 * calls. This function is used very early in the secondary
+	 * CPU boot, and no stack is available at this point.
+	 */
+	mov 	r0, lr
+	bl	ll_get_coherency_base
+	bl	ll_get_coherency_cpumask
+	mov 	lr, r0
+	add	r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET
 1:
-	ldrex	r2, [r3]
-	orr	r2, r2, r1
-	strex	r0, r2, [r3]
-	cmp	r0, #0
-	bne 1b
+	ldrex	r2, [r0]
+	orr	r2, r2, r3
+	strex	r1, r2, [r0]
+	cmp	r1, #0
+	bne	1b
+	mov	pc, lr
+ENDPROC(ll_add_cpu_to_smp_group)
 
+ENTRY(ll_enable_coherency)
+	/*
+	 * As r0 is not modified by ll_get_coherency_base() and
+	 * ll_get_coherency_cpumask(), we use it to temporarly save lr
+	 * and avoid it being modified by the branch and link
+	 * calls. This function is used very early in the secondary
+	 * CPU boot, and no stack is available at this point.
+	 */
+	mov r0, lr
+	bl	ll_get_coherency_base
+	bl	ll_get_coherency_cpumask
+	mov lr, r0
+	add	r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
+1:
+	ldrex	r2, [r0]
+	orr	r2, r2, r3
+	strex	r1, r2, [r0]
+	cmp	r1, #0
+	bne	1b
 	dsb
-
 	mov	r0, #0
 	mov	pc, lr
-ENDPROC(ll_set_cpu_coherent)
+ENDPROC(ll_enable_coherency)
+
+ENTRY(ll_disable_coherency)
+	/*
+	 * As r0 is not modified by ll_get_coherency_base() and
+	 * ll_get_coherency_cpumask(), we use it to temporarly save lr
+	 * and avoid it being modified by the branch and link
+	 * calls. This function is used very early in the secondary
+	 * CPU boot, and no stack is available at this point.
+	 */
+	mov 	r0, lr
+	bl	ll_get_coherency_base
+	bl	ll_get_coherency_cpumask
+	mov 	lr, r0
+	add	r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
+1:
+	ldrex	r2, [r0]
+	bic	r2, r2, r3
+	strex	r1, r2, [r0]
+	cmp	r1, #0
+	bne	1b
+	dsb
+	mov	pc, lr
+ENDPROC(ll_disable_coherency)
+
+	.align 2
+3:
+	.long	coherency_phys_base - .
diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
index 55449c487c9e..b67fb7a10d8b 100644
--- a/arch/arm/mach-mvebu/common.h
+++ b/arch/arm/mach-mvebu/common.h
@@ -18,6 +18,9 @@
 #include <linux/reboot.h>
 
 void mvebu_restart(enum reboot_mode mode, const char *cmd);
+int mvebu_cpu_reset_deassert(int cpu);
+void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr);
+void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr);
 
 void armada_xp_cpu_die(unsigned int cpu);
 
diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c
new file mode 100644
index 000000000000..4a8f9eebebea
--- /dev/null
+++ b/arch/arm/mach-mvebu/cpu-reset.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "mvebu-cpureset: " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/resource.h>
+#include "armada-370-xp.h"
+
+static void __iomem *cpu_reset_base;
+static size_t cpu_reset_size;
+
+#define CPU_RESET_OFFSET(cpu) (cpu * 0x8)
+#define CPU_RESET_ASSERT      BIT(0)
+
+int mvebu_cpu_reset_deassert(int cpu)
+{
+	u32 reg;
+
+	if (!cpu_reset_base)
+		return -ENODEV;
+
+	if (CPU_RESET_OFFSET(cpu) >= cpu_reset_size)
+		return -EINVAL;
+
+	reg = readl(cpu_reset_base + CPU_RESET_OFFSET(cpu));
+	reg &= ~CPU_RESET_ASSERT;
+	writel(reg, cpu_reset_base + CPU_RESET_OFFSET(cpu));
+
+	return 0;
+}
+
+static int mvebu_cpu_reset_map(struct device_node *np, int res_idx)
+{
+	struct resource res;
+
+	if (of_address_to_resource(np, res_idx, &res)) {
+		pr_err("unable to get resource\n");
+		return -ENOENT;
+	}
+
+	if (!request_mem_region(res.start, resource_size(&res),
+				np->full_name)) {
+		pr_err("unable to request region\n");
+		return -EBUSY;
+	}
+
+	cpu_reset_base = ioremap(res.start, resource_size(&res));
+	if (!cpu_reset_base) {
+		pr_err("unable to map registers\n");
+		release_mem_region(res.start, resource_size(&res));
+		return -ENOMEM;
+	}
+
+	cpu_reset_size = resource_size(&res);
+
+	return 0;
+}
+
+int __init mvebu_cpu_reset_init(void)
+{
+	struct device_node *np;
+	int res_idx;
+	int ret;
+
+	np = of_find_compatible_node(NULL, NULL,
+				     "marvell,armada-370-cpu-reset");
+	if (np) {
+		res_idx = 0;
+	} else {
+		/*
+		 * This code is kept for backward compatibility with
+		 * old Device Trees.
+		 */
+		np = of_find_compatible_node(NULL, NULL,
+					     "marvell,armada-370-xp-pmsu");
+		if (np) {
+			pr_warn(FW_WARN "deprecated pmsu binding\n");
+			res_idx = 1;
+		}
+	}
+
+	/* No reset node found */
+	if (!np)
+		return -ENODEV;
+
+	ret = mvebu_cpu_reset_map(np, res_idx);
+	of_node_put(np);
+
+	return ret;
+}
+
+early_initcall(mvebu_cpu_reset_init);
diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-mvebu/dove.c
index 49fa9abd09da..b50464ec1130 100644
--- a/arch/arm/mach-dove/board-dt.c
+++ b/arch/arm/mach-mvebu/dove.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-dove/board-dt.c
+ * arch/arm/mach-mvebu/dove.c
  *
  * Marvell Dove 88AP510 System On Chip FDT Board
  *
@@ -9,35 +9,31 @@
  */
 
 #include <linux/init.h>
-#include <linux/clk-provider.h>
+#include <linux/mbus.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
-#include <mach/dove.h>
-#include <mach/pm.h>
-#include <plat/common.h>
 #include "common.h"
 
-static void __init dove_dt_init(void)
+static void __init dove_init(void)
 {
 	pr_info("Dove 88AP510 SoC\n");
 
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init(0);
 #endif
-	BUG_ON(mvebu_mbus_dt_init());
+	BUG_ON(mvebu_mbus_dt_init(false));
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static const char * const dove_dt_board_compat[] = {
+static const char * const dove_dt_compat[] = {
 	"marvell,dove",
 	NULL
 };
 
-DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
-	.map_io		= dove_map_io,
-	.init_machine	= dove_dt_init,
-	.restart	= dove_restart,
-	.dt_compat	= dove_dt_board_compat,
+DT_MACHINE_START(DOVE_DT, "Marvell Dove")
+	.init_machine	= dove_init,
+	.restart	= mvebu_restart,
+	.dt_compat	= dove_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S
new file mode 100644
index 000000000000..5925366bc03c
--- /dev/null
+++ b/arch/arm/mach-mvebu/headsmp-a9.S
@@ -0,0 +1,34 @@
+/*
+ * SMP support: Entry point for secondary CPUs of Marvell EBU
+ * Cortex-A9 based SOCs (Armada 375 and Armada 38x).
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__CPUINIT
+#define CPU_RESUME_ADDR_REG 0xf10182d4
+
+.global armada_375_smp_cpu1_enable_code_start
+.global armada_375_smp_cpu1_enable_code_end
+
+armada_375_smp_cpu1_enable_code_start:
+	ldr     r0, [pc, #4]
+	ldr     r1, [r0]
+	mov     pc, r1
+	.word   CPU_RESUME_ADDR_REG
+armada_375_smp_cpu1_enable_code_end:
+
+ENTRY(mvebu_cortex_a9_secondary_startup)
+	bl      v7_invalidate_l1
+	b	secondary_startup
+ENDPROC(mvebu_cortex_a9_secondary_startup)
diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S
index 3dd80df428f7..2c4032e368ba 100644
--- a/arch/arm/mach-mvebu/headsmp.S
+++ b/arch/arm/mach-mvebu/headsmp.S
@@ -31,21 +31,10 @@
 ENTRY(armada_xp_secondary_startup)
  ARM_BE8(setend	be )			@ go BE8 if entered LE
 
-	/* Get coherency fabric base physical address */
-	adr	r0, 1f
-	ldr	r1, [r0]
-	ldr	r0, [r0, r1]
+	bl	ll_add_cpu_to_smp_group
 
-	/* Read CPU id */
-	mrc     p15, 0, r1, c0, c0, 5
-	and     r1, r1, #0xF
+	bl	ll_enable_coherency
 
-	/* Add CPU to coherency fabric */
-	bl	ll_set_cpu_coherent
 	b	secondary_startup
 
 ENDPROC(armada_xp_secondary_startup)
-
-	.align 2
-1:
-	.long	coherency_phys_base - .
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c
new file mode 100644
index 000000000000..cbb816f2120c
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood-pm.c
@@ -0,0 +1,76 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include "kirkwood.h"
+
+static void __iomem *ddr_operation_base;
+static void __iomem *memory_pm_ctrl;
+
+static void kirkwood_low_power(void)
+{
+	u32 mem_pm_ctrl;
+
+	mem_pm_ctrl = readl(memory_pm_ctrl);
+
+	/* Set peripherals to low-power mode */
+	writel_relaxed(~0, memory_pm_ctrl);
+
+	/* Set DDR in self-refresh */
+	writel_relaxed(0x7, ddr_operation_base);
+
+	/*
+	 * Set CPU in wait-for-interrupt state.
+	 * This disables the CPU core clocks,
+	 * the array clocks, and also the L2 controller.
+	 */
+	cpu_do_idle();
+
+	writel_relaxed(mem_pm_ctrl, memory_pm_ctrl);
+}
+
+static int kirkwood_suspend_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		kirkwood_low_power();
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int kirkwood_pm_valid_standby(suspend_state_t state)
+{
+	return state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops kirkwood_suspend_ops = {
+	.enter = kirkwood_suspend_enter,
+	.valid = kirkwood_pm_valid_standby,
+};
+
+int __init kirkwood_pm_init(void)
+{
+	ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+	memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
+
+	suspend_set_ops(&kirkwood_suspend_ops);
+	return 0;
+}
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.h b/arch/arm/mach-mvebu/kirkwood-pm.h
new file mode 100644
index 000000000000..21e7530f368b
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood-pm.h
@@ -0,0 +1,26 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_KIRKWOOD_PM_H
+#define __ARCH_KIRKWOOD_PM_H
+
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
+#else
+static inline void kirkwood_pm_init(void) {};
+#endif
+
+#endif
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
new file mode 100644
index 000000000000..46f105913c84
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -0,0 +1,196 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-mvebu/kirkwood.c
+ *
+ * Flattened Device Tree board initialization
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include "kirkwood.h"
+#include "kirkwood-pm.h"
+#include "common.h"
+#include "board.h"
+
+static struct resource kirkwood_cpufreq_resources[] = {
+	[0] = {
+		.start  = CPU_CONTROL_PHYS,
+		.end    = CPU_CONTROL_PHYS + 3,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+	.name		= "kirkwood-cpufreq",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kirkwood_cpufreq_resources),
+	.resource	= kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+	platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= DDR_OPERATION_BASE,
+		.end	= DDR_OPERATION_BASE + 3,
+	},
+};
+
+static struct platform_device kirkwood_cpuidle = {
+	.name		= "kirkwood_cpuidle",
+	.id		= -1,
+	.resource	= kirkwood_cpuidle_resource,
+	.num_resources	= 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+	platform_device_register(&kirkwood_cpuidle);
+}
+
+#define MV643XX_ETH_MAC_ADDR_LOW	0x0414
+#define MV643XX_ETH_MAC_ADDR_HIGH	0x0418
+
+static void __init kirkwood_dt_eth_fixup(void)
+{
+	struct device_node *np;
+
+	/*
+	 * The ethernet interfaces forget the MAC address assigned by u-boot
+	 * if the clocks are turned off. Usually, u-boot on kirkwood boards
+	 * has no DT support to properly set local-mac-address property.
+	 * As a workaround, we get the MAC address from mv643xx_eth registers
+	 * and update the port device node if no valid MAC address is set.
+	 */
+	for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+		struct device_node *pnp = of_get_parent(np);
+		struct clk *clk;
+		struct property *pmac;
+		void __iomem *io;
+		u8 *macaddr;
+		u32 reg;
+
+		if (!pnp)
+			continue;
+
+		/* skip disabled nodes or nodes with valid MAC address*/
+		if (!of_device_is_available(pnp) || of_get_mac_address(np))
+			goto eth_fixup_skip;
+
+		clk = of_clk_get(pnp, 0);
+		if (IS_ERR(clk))
+			goto eth_fixup_skip;
+
+		io = of_iomap(pnp, 0);
+		if (!io)
+			goto eth_fixup_no_map;
+
+		/* ensure port clock is not gated to not hang CPU */
+		clk_prepare_enable(clk);
+
+		/* store MAC address register contents in local-mac-address */
+		pr_err(FW_INFO "%s: local-mac-address is not set\n",
+		       np->full_name);
+
+		pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+		if (!pmac)
+			goto eth_fixup_no_mem;
+
+		pmac->value = pmac + 1;
+		pmac->length = 6;
+		pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+		if (!pmac->name) {
+			kfree(pmac);
+			goto eth_fixup_no_mem;
+		}
+
+		macaddr = pmac->value;
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+		macaddr[0] = (reg >> 24) & 0xff;
+		macaddr[1] = (reg >> 16) & 0xff;
+		macaddr[2] = (reg >> 8) & 0xff;
+		macaddr[3] = reg & 0xff;
+
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+		macaddr[4] = (reg >> 8) & 0xff;
+		macaddr[5] = reg & 0xff;
+
+		of_update_property(np, pmac);
+
+eth_fixup_no_mem:
+		iounmap(io);
+		clk_disable_unprepare(clk);
+eth_fixup_no_map:
+		clk_put(clk);
+eth_fixup_skip:
+		of_node_put(pnp);
+	}
+}
+
+/*
+ * Disable propagation of mbus errors to the CPU local bus, as this
+ * causes mbus errors (which can occur for example for PCI aborts) to
+ * throw CPU aborts, which we're not set up to deal with.
+ */
+void kirkwood_disable_mbus_error_propagation(void)
+{
+	void __iomem *cpu_config;
+
+	cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
+	writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
+}
+
+static struct of_dev_auxdata auxdata[] __initdata = {
+	OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000,
+		       "mvebu-audio", NULL),
+	{ /* sentinel */ }
+};
+
+static void __init kirkwood_dt_init(void)
+{
+	kirkwood_disable_mbus_error_propagation();
+
+	BUG_ON(mvebu_mbus_dt_init(false));
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+	feroceon_of_init();
+#endif
+	kirkwood_cpufreq_init();
+	kirkwood_cpuidle_init();
+
+	kirkwood_pm_init();
+	kirkwood_dt_eth_fixup();
+
+	of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
+}
+
+static const char * const kirkwood_dt_board_compat[] = {
+	"marvell,kirkwood",
+	NULL
+};
+
+DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
+	/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
+	.init_machine	= kirkwood_dt_init,
+	.restart	= mvebu_restart,
+	.dt_compat	= kirkwood_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mvebu/kirkwood.h b/arch/arm/mach-mvebu/kirkwood.h
new file mode 100644
index 000000000000..89f3d1f51643
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-mvebu/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ * 88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define KIRKWOOD_REGS_PHYS_BASE	0xf1000000
+#define DDR_PHYS_BASE           (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
+#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+
+#define DDR_OPERATION_BASE	(DDR_PHYS_BASE + 0x1418)
+
+#define CPU_CONFIG_PHYS		(BRIDGE_PHYS_BASE + 0x0100)
+#define CPU_CONFIG_ERROR_PROP	0x00000004
+
+#define CPU_CONTROL_PHYS	(BRIDGE_PHYS_BASE + 0x0104)
+#define MEMORY_PM_CTRL_PHYS	(BRIDGE_PHYS_BASE + 0x0118)
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c
index f3b325f6cbd4..d0f35b4d4a23 100644
--- a/arch/arm/mach-mvebu/mvebu-soc-id.c
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.c
@@ -23,6 +23,8 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 #include "mvebu-soc-id.h"
 
 #define PCIE_DEV_ID_OFF		0x0
@@ -38,6 +40,7 @@ static bool is_id_valid;
 static const struct of_device_id mvebu_pcie_of_match_table[] = {
 	{ .compatible = "marvell,armada-xp-pcie", },
 	{ .compatible = "marvell,armada-370-pcie", },
+	{ .compatible = "marvell,kirkwood-pcie" },
 	{},
 };
 
@@ -107,7 +110,18 @@ static int __init mvebu_soc_id_init(void)
 	iounmap(pci_base);
 
 res_ioremap:
-	clk_disable_unprepare(clk);
+	/*
+	 * If the PCIe unit is actually enabled and we have PCI
+	 * support in the kernel, we intentionally do not release the
+	 * reference to the clock. We want to keep it running since
+	 * the bootloader does some PCIe link configuration that the
+	 * kernel is for now unable to do, and gating the clock would
+	 * make us loose this precious configuration.
+	 */
+	if (!of_device_is_available(child) || !IS_ENABLED(CONFIG_PCI_MVEBU)) {
+		clk_disable_unprepare(clk);
+		clk_put(clk);
+	}
 
 clk_err:
 	of_node_put(child);
@@ -115,5 +129,33 @@ clk_err:
 
 	return ret;
 }
-core_initcall(mvebu_soc_id_init);
+early_initcall(mvebu_soc_id_init);
+
+static int __init mvebu_soc_device(void)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+
+	/* Also protects against running on non-mvebu systems */
+	if (!is_id_valid)
+		return 0;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->family = kasprintf(GFP_KERNEL, "Marvell");
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", soc_rev);
+	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%X", soc_dev_id);
 
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->family);
+		kfree(soc_dev_attr->revision);
+		kfree(soc_dev_attr->soc_id);
+		kfree(soc_dev_attr);
+	}
+
+	return 0;
+}
+postcore_initcall(mvebu_soc_device);
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.h b/arch/arm/mach-mvebu/mvebu-soc-id.h
index 31654252fe35..c16bb68ca81f 100644
--- a/arch/arm/mach-mvebu/mvebu-soc-id.h
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.h
@@ -20,6 +20,10 @@
 #define MV78XX0_A0_REV	    0x1
 #define MV78XX0_B0_REV	    0x2
 
+/* Armada 375 */
+#define ARMADA_375_Z1_REV   0x0
+#define ARMADA_375_A0_REV   0x3
+
 #ifdef CONFIG_ARCH_MVEBU
 int mvebu_get_soc_id(u32 *dev, u32 *rev);
 #else
diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c
new file mode 100644
index 000000000000..96c2c59e34b6
--- /dev/null
+++ b/arch/arm/mach-mvebu/platsmp-a9.c
@@ -0,0 +1,102 @@
+/*
+ * Symmetric Multi Processing (SMP) support for Marvell EBU Cortex-A9
+ * based SOCs (Armada 375/38x).
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <linux/mbus.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include "common.h"
+#include "mvebu-soc-id.h"
+#include "pmsu.h"
+
+#define CRYPT0_ENG_ID   41
+#define CRYPT0_ENG_ATTR 0x1
+#define SRAM_PHYS_BASE  0xFFFF0000
+
+#define BOOTROM_BASE    0xFFF00000
+#define BOOTROM_SIZE    0x100000
+
+extern unsigned char armada_375_smp_cpu1_enable_code_end;
+extern unsigned char armada_375_smp_cpu1_enable_code_start;
+
+void armada_375_smp_cpu1_enable_wa(void)
+{
+	void __iomem *sram_virt_base;
+
+	mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE);
+	mvebu_mbus_add_window_by_id(CRYPT0_ENG_ID, CRYPT0_ENG_ATTR,
+				SRAM_PHYS_BASE, SZ_64K);
+	sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K);
+
+	memcpy(sram_virt_base, &armada_375_smp_cpu1_enable_code_start,
+	       &armada_375_smp_cpu1_enable_code_end
+	       - &armada_375_smp_cpu1_enable_code_start);
+}
+
+extern void mvebu_cortex_a9_secondary_startup(void);
+
+static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu,
+						    struct task_struct *idle)
+{
+	int ret, hw_cpu;
+
+	pr_info("Booting CPU %d\n", cpu);
+
+	/*
+	 * Write the address of secondary startup into the system-wide
+	 * flags register. The boot monitor waits until it receives a
+	 * soft interrupt, and then the secondary CPU branches to this
+	 * address.
+	 */
+	hw_cpu = cpu_logical_map(cpu);
+
+	if (of_machine_is_compatible("marvell,armada375")) {
+		u32 dev, rev;
+
+		if (mvebu_get_soc_id(&dev, &rev) == 0 &&
+		    rev == ARMADA_375_Z1_REV)
+			armada_375_smp_cpu1_enable_wa();
+
+		mvebu_system_controller_set_cpu_boot_addr(mvebu_cortex_a9_secondary_startup);
+	}
+	else {
+		mvebu_pmsu_set_cpu_boot_addr(hw_cpu,
+					     mvebu_cortex_a9_secondary_startup);
+	}
+
+	smp_wmb();
+	ret = mvebu_cpu_reset_deassert(hw_cpu);
+	if (ret) {
+		pr_err("Could not start the secondary CPU: %d\n", ret);
+		return ret;
+	}
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	return 0;
+}
+
+static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = {
+	.smp_boot_secondary	= mvebu_cortex_a9_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= armada_xp_cpu_die,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp",
+		      &mvebu_cortex_a9_smp_ops);
+CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp",
+		      &mvebu_cortex_a9_smp_ops);
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index a6da03f5b24e..88b976b31719 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -70,16 +70,19 @@ static void __init set_secondary_cpus_clock(void)
 	}
 }
 
-static void armada_xp_secondary_init(unsigned int cpu)
-{
-	armada_xp_mpic_smp_cpu_init();
-}
-
 static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
+	int ret, hw_cpu;
+
 	pr_info("Booting CPU %d\n", cpu);
 
-	armada_xp_boot_cpu(cpu, armada_xp_secondary_startup);
+	hw_cpu = cpu_logical_map(cpu);
+	mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup);
+	ret = mvebu_cpu_reset_deassert(hw_cpu);
+	if (ret) {
+		pr_warn("unable to boot CPU: %d\n", ret);
+		return ret;
+	}
 
 	return 0;
 }
@@ -90,8 +93,6 @@ static void __init armada_xp_smp_init_cpus(void)
 
 	if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS)
 		panic("Invalid number of CPUs in DT\n");
-
-	set_smp_cross_call(armada_mpic_send_doorbell);
 }
 
 static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
@@ -102,7 +103,7 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
 
 	set_secondary_cpus_clock();
 	flush_cache_all();
-	set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+	set_cpu_coherent();
 
 	/*
 	 * In order to boot the secondary CPUs we need to ensure
@@ -124,9 +125,11 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
 struct smp_operations armada_xp_smp_ops __initdata = {
 	.smp_init_cpus		= armada_xp_smp_init_cpus,
 	.smp_prepare_cpus	= armada_xp_smp_prepare_cpus,
-	.smp_secondary_init	= armada_xp_secondary_init,
 	.smp_boot_secondary	= armada_xp_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= armada_xp_cpu_die,
 #endif
 };
+
+CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
+		      &armada_xp_smp_ops);
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index d71ef53107c4..53a55c8520bf 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -16,62 +16,283 @@
  * other SOC units
  */
 
+#define pr_fmt(fmt) "mvebu-pmsu: " fmt
+
+#include <linux/cpu_pm.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/of_address.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 #include <linux/smp.h>
+#include <linux/resource.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
 #include <asm/smp_plat.h>
-#include "pmsu.h"
+#include <asm/suspend.h>
+#include <asm/tlbflush.h>
+#include "common.h"
 
 static void __iomem *pmsu_mp_base;
-static void __iomem *pmsu_reset_base;
 
-#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu)	((cpu * 0x100) + 0x24)
-#define PMSU_RESET_CTL_OFFSET(cpu)		(cpu * 0x8)
+#define PMSU_BASE_OFFSET    0x100
+#define PMSU_REG_SIZE	    0x1000
+
+/* PMSU MP registers */
+#define PMSU_CONTROL_AND_CONFIG(cpu)	    ((cpu * 0x100) + 0x104)
+#define PMSU_CONTROL_AND_CONFIG_DFS_REQ		BIT(18)
+#define PMSU_CONTROL_AND_CONFIG_PWDDN_REQ	BIT(16)
+#define PMSU_CONTROL_AND_CONFIG_L2_PWDDN	BIT(20)
+
+#define PMSU_CPU_POWER_DOWN_CONTROL(cpu)    ((cpu * 0x100) + 0x108)
+
+#define PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP	BIT(0)
+
+#define PMSU_STATUS_AND_MASK(cpu)	    ((cpu * 0x100) + 0x10c)
+#define PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT	BIT(16)
+#define PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT	BIT(17)
+#define PMSU_STATUS_AND_MASK_IRQ_WAKEUP		BIT(20)
+#define PMSU_STATUS_AND_MASK_FIQ_WAKEUP		BIT(21)
+#define PMSU_STATUS_AND_MASK_DBG_WAKEUP		BIT(22)
+#define PMSU_STATUS_AND_MASK_IRQ_MASK		BIT(24)
+#define PMSU_STATUS_AND_MASK_FIQ_MASK		BIT(25)
+
+#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124)
+
+/* PMSU fabric registers */
+#define L2C_NFABRIC_PM_CTL		    0x4
+#define L2C_NFABRIC_PM_CTL_PWR_DOWN		BIT(20)
+
+extern void ll_disable_coherency(void);
+extern void ll_enable_coherency(void);
+
+static struct platform_device armada_xp_cpuidle_device = {
+	.name = "cpuidle-armada-370-xp",
+};
 
 static struct of_device_id of_pmsu_table[] = {
-	{.compatible = "marvell,armada-370-xp-pmsu"},
+	{ .compatible = "marvell,armada-370-pmsu", },
+	{ .compatible = "marvell,armada-370-xp-pmsu", },
+	{ .compatible = "marvell,armada-380-pmsu", },
 	{ /* end of list */ },
 };
 
-#ifdef CONFIG_SMP
-int armada_xp_boot_cpu(unsigned int cpu_id, void *boot_addr)
+void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
 {
-	int reg, hw_cpu;
+	writel(virt_to_phys(boot_addr), pmsu_mp_base +
+		PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
+}
+
+static int __init armada_370_xp_pmsu_init(void)
+{
+	struct device_node *np;
+	struct resource res;
+	int ret = 0;
+
+	np = of_find_matching_node(NULL, of_pmsu_table);
+	if (!np)
+		return 0;
+
+	pr_info("Initializing Power Management Service Unit\n");
 
-	if (!pmsu_mp_base || !pmsu_reset_base) {
-		pr_warn("Can't boot CPU. PMSU is uninitialized\n");
-		return 1;
+	if (of_address_to_resource(np, 0, &res)) {
+		pr_err("unable to get resource\n");
+		ret = -ENOENT;
+		goto out;
 	}
 
-	hw_cpu = cpu_logical_map(cpu_id);
+	if (of_device_is_compatible(np, "marvell,armada-370-xp-pmsu")) {
+		pr_warn(FW_WARN "deprecated pmsu binding\n");
+		res.start = res.start - PMSU_BASE_OFFSET;
+		res.end = res.start + PMSU_REG_SIZE - 1;
+	}
 
-	writel(virt_to_phys(boot_addr), pmsu_mp_base +
-			PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
+	if (!request_mem_region(res.start, resource_size(&res),
+				np->full_name)) {
+		pr_err("unable to request region\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	pmsu_mp_base = ioremap(res.start, resource_size(&res));
+	if (!pmsu_mp_base) {
+		pr_err("unable to map registers\n");
+		release_mem_region(res.start, resource_size(&res));
+		ret = -ENOMEM;
+		goto out;
+	}
+
+ out:
+	of_node_put(np);
+	return ret;
+}
+
+static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void)
+{
+	u32 reg;
+
+	if (pmsu_mp_base == NULL)
+		return;
+
+	/* Enable L2 & Fabric powerdown in Deep-Idle mode - Fabric */
+	reg = readl(pmsu_mp_base + L2C_NFABRIC_PM_CTL);
+	reg |= L2C_NFABRIC_PM_CTL_PWR_DOWN;
+	writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL);
+}
+
+static void armada_370_xp_cpu_resume(void)
+{
+	asm volatile("bl    ll_add_cpu_to_smp_group\n\t"
+		     "bl    ll_enable_coherency\n\t"
+		     "b	    cpu_resume\n\t");
+}
+
+/* No locking is needed because we only access per-CPU registers */
+void armada_370_xp_pmsu_idle_prepare(bool deepidle)
+{
+	unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+	u32 reg;
+
+	if (pmsu_mp_base == NULL)
+		return;
 
-	/* Release CPU from reset by clearing reset bit*/
-	reg = readl(pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu));
-	reg &= (~0x1);
-	writel(reg, pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu));
+	/*
+	 * Adjust the PMSU configuration to wait for WFI signal, enable
+	 * IRQ and FIQ as wakeup events, set wait for snoop queue empty
+	 * indication and mask IRQ and FIQ from CPU
+	 */
+	reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+	reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT    |
+	       PMSU_STATUS_AND_MASK_IRQ_WAKEUP       |
+	       PMSU_STATUS_AND_MASK_FIQ_WAKEUP       |
+	       PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT |
+	       PMSU_STATUS_AND_MASK_IRQ_MASK         |
+	       PMSU_STATUS_AND_MASK_FIQ_MASK;
+	writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+
+	reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+	/* ask HW to power down the L2 Cache if needed */
+	if (deepidle)
+		reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
+
+	/* request power down */
+	reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ;
+	writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+
+	/* Disable snoop disable by HW - SW is taking care of it */
+	reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
+	reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP;
+	writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
+}
+
+static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle)
+{
+	armada_370_xp_pmsu_idle_prepare(deepidle);
+
+	v7_exit_coherency_flush(all);
+
+	ll_disable_coherency();
+
+	dsb();
+
+	wfi();
+
+	/* If we are here, wfi failed. As processors run out of
+	 * coherency for some time, tlbs might be stale, so flush them
+	 */
+	local_flush_tlb_all();
+
+	ll_enable_coherency();
+
+	/* Test the CR_C bit and set it if it was cleared */
+	asm volatile(
+	"mrc	p15, 0, %0, c1, c0, 0 \n\t"
+	"tst	%0, #(1 << 2) \n\t"
+	"orreq	%0, %0, #(1 << 2) \n\t"
+	"mcreq	p15, 0, %0, c1, c0, 0 \n\t"
+	"isb	"
+	: : "r" (0));
+
+	pr_warn("Failed to suspend the system\n");
 
 	return 0;
 }
-#endif
 
-static int __init armada_370_xp_pmsu_init(void)
+static int armada_370_xp_cpu_suspend(unsigned long deepidle)
+{
+	return cpu_suspend(deepidle, do_armada_370_xp_cpu_suspend);
+}
+
+/* No locking is needed because we only access per-CPU registers */
+static noinline void armada_370_xp_pmsu_idle_restore(void)
+{
+	unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+	u32 reg;
+
+	if (pmsu_mp_base == NULL)
+		return;
+
+	/* cancel ask HW to power down the L2 Cache if possible */
+	reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+	reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
+	writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+
+	/* cancel Enable wakeup events and mask interrupts */
+	reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+	reg &= ~(PMSU_STATUS_AND_MASK_IRQ_WAKEUP | PMSU_STATUS_AND_MASK_FIQ_WAKEUP);
+	reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT;
+	reg &= ~PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT;
+	reg &= ~(PMSU_STATUS_AND_MASK_IRQ_MASK | PMSU_STATUS_AND_MASK_FIQ_MASK);
+	writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+}
+
+static int armada_370_xp_cpu_pm_notify(struct notifier_block *self,
+				    unsigned long action, void *hcpu)
+{
+	if (action == CPU_PM_ENTER) {
+		unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+		mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_370_xp_cpu_resume);
+	} else if (action == CPU_PM_EXIT) {
+		armada_370_xp_pmsu_idle_restore();
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block armada_370_xp_cpu_pm_notifier = {
+	.notifier_call = armada_370_xp_cpu_pm_notify,
+};
+
+int __init armada_370_xp_cpu_pm_init(void)
 {
 	struct device_node *np;
 
+	/*
+	 * Check that all the requirements are available to enable
+	 * cpuidle. So far, it is only supported on Armada XP, cpuidle
+	 * needs the coherency fabric and the PMSU enabled
+	 */
+
+	if (!of_machine_is_compatible("marvell,armadaxp"))
+		return 0;
+
+	np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
+	if (!np)
+		return 0;
+	of_node_put(np);
+
 	np = of_find_matching_node(NULL, of_pmsu_table);
-	if (np) {
-		pr_info("Initializing Power Management Service Unit\n");
-		pmsu_mp_base = of_iomap(np, 0);
-		pmsu_reset_base = of_iomap(np, 1);
-		of_node_put(np);
-	}
+	if (!np)
+		return 0;
+	of_node_put(np);
+
+	armada_370_xp_pmsu_enable_l2_powerdown_onidle();
+	armada_xp_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
+	platform_device_register(&armada_xp_cpuidle_device);
+	cpu_pm_register_notifier(&armada_370_xp_cpu_pm_notifier);
 
 	return 0;
 }
 
+arch_initcall(armada_370_xp_cpu_pm_init);
 early_initcall(armada_370_xp_pmsu_init);
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index a7fb89a5b5d9..0c5524ac75b7 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -1,5 +1,5 @@
 /*
- * System controller support for Armada 370 and XP platforms.
+ * System controller support for Armada 370, 375 and XP platforms.
  *
  * Copyright (C) 2012 Marvell
  *
@@ -11,7 +11,7 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  *
- * The Armada 370 and Armada XP SoCs both have a range of
+ * The Armada 370, 375 and Armada XP SoCs have a range of
  * miscellaneous registers, that do not belong to a particular device,
  * but rather provide system-level features. This basic
  * system-controller driver provides a device tree binding for those
@@ -37,6 +37,8 @@ struct mvebu_system_controller {
 
 	u32 rstoutn_mask_reset_out_en;
 	u32 system_soft_reset;
+
+	u32 resume_boot_addr;
 };
 static struct mvebu_system_controller *mvebu_sc;
 
@@ -47,6 +49,14 @@ static const struct mvebu_system_controller armada_370_xp_system_controller = {
 	.system_soft_reset = 0x1,
 };
 
+static const struct mvebu_system_controller armada_375_system_controller = {
+	.rstoutn_mask_offset = 0x54,
+	.system_soft_reset_offset = 0x58,
+	.rstoutn_mask_reset_out_en = 0x1,
+	.system_soft_reset = 0x1,
+	.resume_boot_addr = 0xd4,
+};
+
 static const struct mvebu_system_controller orion_system_controller = {
 	.rstoutn_mask_offset = 0x108,
 	.system_soft_reset_offset = 0x10c,
@@ -54,13 +64,16 @@ static const struct mvebu_system_controller orion_system_controller = {
 	.system_soft_reset = 0x1,
 };
 
-static struct of_device_id of_system_controller_table[] = {
+static const struct of_device_id of_system_controller_table[] = {
 	{
 		.compatible = "marvell,orion-system-controller",
 		.data = (void *) &orion_system_controller,
 	}, {
 		.compatible = "marvell,armada-370-xp-system-controller",
 		.data = (void *) &armada_370_xp_system_controller,
+	}, {
+		.compatible = "marvell,armada-375-system-controller",
+		.data = (void *) &armada_375_system_controller,
 	},
 	{ /* end of list */ },
 };
@@ -88,15 +101,24 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd)
 		;
 }
 
+#ifdef CONFIG_SMP
+void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr)
+{
+	BUG_ON(system_controller_base == NULL);
+	BUG_ON(mvebu_sc->resume_boot_addr == 0);
+	writel(virt_to_phys(boot_addr), system_controller_base +
+	       mvebu_sc->resume_boot_addr);
+}
+#endif
+
 static int __init mvebu_system_controller_init(void)
 {
+	const struct of_device_id *match;
 	struct device_node *np;
 
-	np = of_find_matching_node(NULL, of_system_controller_table);
+	np = of_find_matching_node_and_match(NULL, of_system_controller_table,
+					     &match);
 	if (np) {
-		const struct of_device_id *match =
-		    of_match_node(of_system_controller_table, np);
-		BUG_ON(!match);
 		system_controller_base = of_iomap(np, 0);
 		mvebu_sc = (struct mvebu_system_controller *)match->data;
 		of_node_put(np);
@@ -105,4 +127,4 @@ static int __init mvebu_system_controller_init(void)
 	return 0;
 }
 
-arch_initcall(mvebu_system_controller_init);
+early_initcall(mvebu_system_controller_init);
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 8cde9e05b5d6..84794137b175 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -16,11 +16,7 @@ config ARCH_MXS
 	bool "Freescale MXS (i.MX23, i.MX28) support"
 	depends on ARCH_MULTI_V5
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select CLKSRC_OF
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK_PREPARE
 	select PINCTRL
 	select SOC_BUS
 	select SOC_IMX23
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 1dc5acd4fc99..2e7cec86e50e 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -157,6 +157,8 @@ enum mac_oui {
 	OUI_FSL,
 	OUI_DENX,
 	OUI_CRYSTALFONTZ,
+	OUI_I2SE,
+	OUI_ARMADEUS,
 };
 
 static void __init update_fec_mac_prop(enum mac_oui oui)
@@ -211,6 +213,16 @@ static void __init update_fec_mac_prop(enum mac_oui oui)
 			macaddr[1] = 0xb9;
 			macaddr[2] = 0xe1;
 			break;
+		case OUI_I2SE:
+			macaddr[0] = 0x00;
+			macaddr[1] = 0x01;
+			macaddr[2] = 0x87;
+			break;
+		case OUI_ARMADEUS:
+			macaddr[0] = 0x00;
+			macaddr[1] = 0x1e;
+			macaddr[2] = 0xac;
+			break;
 		}
 		val = ocotp[i];
 		macaddr[3] = (val >> 16) & 0xff;
@@ -236,6 +248,11 @@ static void __init imx28_evk_init(void)
 	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
 }
 
+static void __init imx28_apf28_init(void)
+{
+	update_fec_mac_prop(OUI_ARMADEUS);
+}
+
 static int apx4devkit_phy_fixup(struct phy_device *phy)
 {
 	phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
@@ -330,6 +347,11 @@ static void __init crystalfontz_init(void)
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
 }
 
+static void __init duckbill_init(void)
+{
+	update_fec_mac_prop(OUI_I2SE);
+}
+
 static void __init m28cu3_init(void)
 {
 	update_fec_mac_prop(OUI_DENX);
@@ -426,6 +448,11 @@ static int __init mxs_restart_init(void)
 	return 0;
 }
 
+static void __init eukrea_mbmx283lc_init(void)
+{
+	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
+}
+
 static void __init mxs_machine_init(void)
 {
 	struct device_node *root;
@@ -458,10 +485,16 @@ static void __init mxs_machine_init(void)
 
 	if (of_machine_is_compatible("fsl,imx28-evk"))
 		imx28_evk_init();
+	if (of_machine_is_compatible("armadeus,imx28-apf28"))
+		imx28_apf28_init();
 	else if (of_machine_is_compatible("bluegiga,apx4devkit"))
 		apx4devkit_init();
 	else if (of_machine_is_compatible("crystalfontz,cfa10036"))
 		crystalfontz_init();
+	else if (of_machine_is_compatible("eukrea,mbmx283lc"))
+		eukrea_mbmx283lc_init();
+	else if (of_machine_is_compatible("i2se,duckbill"))
+		duckbill_init();
 	else if (of_machine_is_compatible("msr,m28cu3"))
 		m28cu3_init();
 
diff --git a/arch/arm/mach-netx/include/mach/timex.h b/arch/arm/mach-netx/include/mach/timex.h
deleted file mode 100644
index 1120dd0ba393..000000000000
--- a/arch/arm/mach-netx/include/mach/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/timex.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE 100000000
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 6df42e643031..5fb2a590ec17 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -28,6 +28,9 @@
 #include <asm/mach/time.h>
 #include <mach/netx-regs.h>
 
+#define NETX_CLOCK_FREQ 100000000
+#define NETX_LATCH DIV_ROUND_CLOSEST(NETX_CLOCK_FREQ, HZ)
+
 #define TIMER_CLOCKEVENT 0
 #define TIMER_CLOCKSOURCE 1
 
@@ -41,7 +44,7 @@ static void netx_set_mode(enum clock_event_mode mode,
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		writel(LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
+		writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
 		tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
 			NETX_GPIO_COUNTER_CTRL_IRQ_EN |
 			NETX_GPIO_COUNTER_CTRL_RUN;
@@ -99,7 +102,7 @@ netx_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction netx_timer_irq = {
 	.name		= "NetX Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= netx_timer_interrupt,
 };
 
@@ -114,7 +117,7 @@ void __init netx_timer_init(void)
 	/* Reset the timer value to zero */
 	writel(0, NETX_GPIO_COUNTER_CURRENT(0));
 
-	writel(LATCH, NETX_GPIO_COUNTER_MAX(0));
+	writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(0));
 
 	/* acknowledge interrupt */
 	writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
@@ -137,11 +140,11 @@ void __init netx_timer_init(void)
 			NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
 
 	clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
-		"netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up);
+		"netx_timer", NETX_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up);
 
 	/* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
 	 * Adding some safety ... */
 	netx_clockevent.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&netx_clockevent, CLOCK_TICK_RATE,
+	clockevents_config_and_register(&netx_clockevent, NETX_CLOCK_FREQ,
 					0xa00, 0xfffffffe);
 }
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 4d42da49753c..486d301f43fd 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -6,16 +6,11 @@ config ARCH_NOMADIK
 	select ARM_VIC
 	select CLKSRC_NOMADIK_MTU
 	select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
-	select CLKSRC_OF
-	select COMMON_CLK
 	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_NOMADIK
 	select PINCTRL_STN8815
-	select SPARSE_IRQ
-	select USE_OF
 	help
 	  Support for the Nomadik platform by ST-Ericsson
 
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 4a1065e41e9c..9116ca476d7c 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -143,23 +143,16 @@ static int __init cpu8815_mmcsd_init(void)
 }
 device_initcall(cpu8815_mmcsd_init);
 
-static void __init cpu8815_init_of(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	/* At full speed latency must be >=2, so 0x249 in low bits */
-	l2x0_of_init(0x00730249, 0xfe000fff);
-#endif
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char * cpu8815_board_compat[] = {
 	"calaosystems,usb-s8815",
 	NULL,
 };
 
 DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815")
+	/* At full speed latency must be >=2, so 0x249 in low bits */
+	.l2c_aux_val	= 0x00700249,
+	.l2c_aux_mask	= 0xfe0fefff,
 	.map_io		= cpu8815_map_io,
-	.init_machine	= cpu8815_init_of,
 	.restart	= cpu8815_restart,
 	.dt_compat      = cpu8815_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
index 59d8f0a70919..bc41f26c1a12 100644
--- a/arch/arm/mach-nspire/Kconfig
+++ b/arch/arm/mach-nspire/Kconfig
@@ -3,14 +3,9 @@ config ARCH_NSPIRE
 	depends on ARCH_MULTI_V4_V5
 	depends on MMU
 	select CPU_ARM926T
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select SPARSE_IRQ
 	select ARM_AMBA
 	select ARM_VIC
 	select ARM_TIMER_SP804
-	select USE_OF
-	select CLKSRC_OF
 	help
 	  This enables support for systems using the TI-NSPIRE CPU
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
index 4b2ed2e8352f..3d24ebf12095 100644
--- a/arch/arm/mach-nspire/nspire.c
+++ b/arch/arm/mach-nspire/nspire.c
@@ -63,7 +63,7 @@ static void __init nspire_init(void)
 			nspire_auxdata, NULL);
 }
 
-static void nspire_restart(char mode, const char *cmd)
+static void nspire_restart(enum reboot_mode mode, const char *cmd)
 {
 	void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K);
 	if (!base)
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index f12a12af3523..d1f12095f315 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -44,13 +44,10 @@ static unsigned int irq_counter[16];
 
 static irqreturn_t deferred_fiq(int irq, void *dev_id)
 {
-	struct irq_desc *irq_desc;
-	struct irq_chip *irq_chip = NULL;
 	int gpio, irq_num, fiq_count;
+	struct irq_chip *irq_chip;
 
-	irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
-	if (irq_desc)
-		irq_chip = irq_desc->irq_data.chip;
+	irq_chip = irq_get_chip(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
 
 	/*
 	 * For each handled GPIO interrupt, keep calling its interrupt handler
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index fd90cafc2e36..5b45d266d83e 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -318,6 +318,9 @@ static void __init h2_init_smc91x(void)
 
 static int tps_setup(struct i2c_client *client, void *context)
 {
+	if (!IS_BUILTIN(CONFIG_TPS65010))
+		return -ENOSYS;
+	
 	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
 				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
 
@@ -343,7 +346,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	/* usb1 has a Mini-AB port and external isp1301 transceiver */
 	.otg		= 2,
 
-#ifdef	CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
 	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
 #elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 816ecd13f81e..bfed4f928663 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -366,7 +366,7 @@ static struct omap_usb_config h3_usb_config __initdata = {
 	/* usb1 has a Mini-AB port and external isp1301 transceiver */
 	.otg	    = 2,
 
-#ifdef CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
 #elif  defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index bd5f02e9c354..c49ce83cc1eb 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -312,7 +312,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	/* usb1 has a Mini-AB port and external isp1301 transceiver */
 	.otg		= 2,
 
-#ifdef	CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
 	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
 #elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index d68909b095f1..7436d4cf6596 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -191,6 +191,9 @@ static struct platform_device osk5912_tps_leds = {
 
 static int osk_tps_setup(struct i2c_client *client, void *context)
 {
+	if (!IS_BUILTIN(CONFIG_TPS65010))
+		return -ENOSYS;
+
 	/* Set GPIO 1 HIGH to disable VBUS power supply;
 	 * OHCI driver powers it up/down as needed.
 	 */
@@ -280,7 +283,7 @@ static struct omap_usb_config osk_usb_config __initdata = {
 	 * be used, with a NONSTANDARD gender-bending cable/dongle, as
 	 * a peripheral.
 	 */
-#ifdef	CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
 	.register_dev	= 1,
 	.hmc_mode	= 0,
 #else
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 0a8d3349149c..29e526235dc2 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -266,31 +266,6 @@ static struct physmap_flash_data sx1_flash_data = {
 	.nr_parts	= ARRAY_SIZE(sx1_partitions),
 };
 
-#ifdef CONFIG_SX1_OLD_FLASH
-/* MTD Intel StrataFlash - old flashes */
-static struct resource sx1_old_flash_resource[] = {
-	[0] = {
-		.start	= OMAP_CS0_PHYS,	/* Physical */
-		.end	= OMAP_CS0_PHYS + SZ_16M - 1,,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= OMAP_CS1_PHYS,
-		.end	= OMAP_CS1_PHYS + SZ_8M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sx1_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &sx1_flash_data,
-	},
-	.num_resources	= 2,
-	.resource	= &sx1_old_flash_resource,
-};
-#else
 /* MTD Intel 4000 flash - new flashes */
 static struct resource sx1_new_flash_resource = {
 	.start		= OMAP_CS0_PHYS,
@@ -307,7 +282,6 @@ static struct platform_device sx1_flash_device = {
 	.num_resources	= 1,
 	.resource	= &sx1_new_flash_resource,
 };
-#endif
 
 /*----------- USB -------------------------*/
 
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 5bb8ce86d54b..4be601b638d7 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -32,55 +32,51 @@
 
 #define OMAP1_DMA_BASE			(0xfffed800)
 #define OMAP1_LOGICAL_DMA_CH_COUNT	17
-#define OMAP1_DMA_STRIDE		0x40
 
-static u32 errata;
 static u32 enable_1510_mode;
-static u8 dma_stride;
-static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end;
-
-static u16 reg_map[] = {
-	[GCR]		= 0x400,
-	[GSCR]		= 0x404,
-	[GRST1]		= 0x408,
-	[HW_ID]		= 0x442,
-	[PCH2_ID]	= 0x444,
-	[PCH0_ID]	= 0x446,
-	[PCH1_ID]	= 0x448,
-	[PCHG_ID]	= 0x44a,
-	[PCHD_ID]	= 0x44c,
-	[CAPS_0]	= 0x44e,
-	[CAPS_1]	= 0x452,
-	[CAPS_2]	= 0x456,
-	[CAPS_3]	= 0x458,
-	[CAPS_4]	= 0x45a,
-	[PCH2_SR]	= 0x460,
-	[PCH0_SR]	= 0x480,
-	[PCH1_SR]	= 0x482,
-	[PCHD_SR]	= 0x4c0,
+
+static const struct omap_dma_reg reg_map[] = {
+	[GCR]		= { 0x0400, 0x00, OMAP_DMA_REG_16BIT },
+	[GSCR]		= { 0x0404, 0x00, OMAP_DMA_REG_16BIT },
+	[GRST1]		= { 0x0408, 0x00, OMAP_DMA_REG_16BIT },
+	[HW_ID]		= { 0x0442, 0x00, OMAP_DMA_REG_16BIT },
+	[PCH2_ID]	= { 0x0444, 0x00, OMAP_DMA_REG_16BIT },
+	[PCH0_ID]	= { 0x0446, 0x00, OMAP_DMA_REG_16BIT },
+	[PCH1_ID]	= { 0x0448, 0x00, OMAP_DMA_REG_16BIT },
+	[PCHG_ID]	= { 0x044a, 0x00, OMAP_DMA_REG_16BIT },
+	[PCHD_ID]	= { 0x044c, 0x00, OMAP_DMA_REG_16BIT },
+	[CAPS_0]	= { 0x044e, 0x00, OMAP_DMA_REG_2X16BIT },
+	[CAPS_1]	= { 0x0452, 0x00, OMAP_DMA_REG_2X16BIT },
+	[CAPS_2]	= { 0x0456, 0x00, OMAP_DMA_REG_16BIT },
+	[CAPS_3]	= { 0x0458, 0x00, OMAP_DMA_REG_16BIT },
+	[CAPS_4]	= { 0x045a, 0x00, OMAP_DMA_REG_16BIT },
+	[PCH2_SR]	= { 0x0460, 0x00, OMAP_DMA_REG_16BIT },
+	[PCH0_SR]	= { 0x0480, 0x00, OMAP_DMA_REG_16BIT },
+	[PCH1_SR]	= { 0x0482, 0x00, OMAP_DMA_REG_16BIT },
+	[PCHD_SR]	= { 0x04c0, 0x00, OMAP_DMA_REG_16BIT },
 
 	/* Common Registers */
-	[CSDP]		= 0x00,
-	[CCR]		= 0x02,
-	[CICR]		= 0x04,
-	[CSR]		= 0x06,
-	[CEN]		= 0x10,
-	[CFN]		= 0x12,
-	[CSFI]		= 0x14,
-	[CSEI]		= 0x16,
-	[CPC]		= 0x18,	/* 15xx only */
-	[CSAC]		= 0x18,
-	[CDAC]		= 0x1a,
-	[CDEI]		= 0x1c,
-	[CDFI]		= 0x1e,
-	[CLNK_CTRL]	= 0x28,
+	[CSDP]		= { 0x0000, 0x40, OMAP_DMA_REG_16BIT },
+	[CCR]		= { 0x0002, 0x40, OMAP_DMA_REG_16BIT },
+	[CICR]		= { 0x0004, 0x40, OMAP_DMA_REG_16BIT },
+	[CSR]		= { 0x0006, 0x40, OMAP_DMA_REG_16BIT },
+	[CEN]		= { 0x0010, 0x40, OMAP_DMA_REG_16BIT },
+	[CFN]		= { 0x0012, 0x40, OMAP_DMA_REG_16BIT },
+	[CSFI]		= { 0x0014, 0x40, OMAP_DMA_REG_16BIT },
+	[CSEI]		= { 0x0016, 0x40, OMAP_DMA_REG_16BIT },
+	[CPC]		= { 0x0018, 0x40, OMAP_DMA_REG_16BIT },	/* 15xx only */
+	[CSAC]		= { 0x0018, 0x40, OMAP_DMA_REG_16BIT },
+	[CDAC]		= { 0x001a, 0x40, OMAP_DMA_REG_16BIT },
+	[CDEI]		= { 0x001c, 0x40, OMAP_DMA_REG_16BIT },
+	[CDFI]		= { 0x001e, 0x40, OMAP_DMA_REG_16BIT },
+	[CLNK_CTRL]	= { 0x0028, 0x40, OMAP_DMA_REG_16BIT },
 
 	/* Channel specific register offsets */
-	[CSSA]		= 0x08,
-	[CDSA]		= 0x0c,
-	[COLOR]		= 0x20,
-	[CCR2]		= 0x24,
-	[LCH_CTRL]	= 0x2a,
+	[CSSA]		= { 0x0008, 0x40, OMAP_DMA_REG_2X16BIT },
+	[CDSA]		= { 0x000c, 0x40, OMAP_DMA_REG_2X16BIT },
+	[COLOR]		= { 0x0020, 0x40, OMAP_DMA_REG_2X16BIT },
+	[CCR2]		= { 0x0024, 0x40, OMAP_DMA_REG_16BIT },
+	[LCH_CTRL]	= { 0x002a, 0x40, OMAP_DMA_REG_16BIT },
 };
 
 static struct resource res[] __initdata = {
@@ -181,44 +177,36 @@ static struct resource res[] __initdata = {
 static void __iomem *dma_base;
 static inline void dma_write(u32 val, int reg, int lch)
 {
-	u8  stride;
-	u32 offset;
+	void __iomem *addr = dma_base;
 
-	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
-	offset = reg_map[reg] + (stride * lch);
+	addr += reg_map[reg].offset;
+	addr += reg_map[reg].stride * lch;
 
-	__raw_writew(val, dma_base + offset);
-	if ((reg > CLNK_CTRL && reg < CCEN) ||
-			(reg > PCHD_ID && reg < CAPS_2)) {
-		u32 offset2 = reg_map[reg] + 2 + (stride * lch);
-		__raw_writew(val >> 16, dma_base + offset2);
-	}
+	__raw_writew(val, addr);
+	if (reg_map[reg].type == OMAP_DMA_REG_2X16BIT)
+		__raw_writew(val >> 16, addr + 2);
 }
 
 static inline u32 dma_read(int reg, int lch)
 {
-	u8 stride;
-	u32 offset, val;
-
-	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
-	offset = reg_map[reg] + (stride * lch);
-
-	val = __raw_readw(dma_base + offset);
-	if ((reg > CLNK_CTRL && reg < CCEN) ||
-			(reg > PCHD_ID && reg < CAPS_2)) {
-		u16 upper;
-		u32 offset2 = reg_map[reg] + 2 + (stride * lch);
-		upper = __raw_readw(dma_base + offset2);
-		val |= (upper << 16);
-	}
+	void __iomem *addr = dma_base;
+	uint32_t val;
+
+	addr += reg_map[reg].offset;
+	addr += reg_map[reg].stride * lch;
+
+	val = __raw_readw(addr);
+	if (reg_map[reg].type == OMAP_DMA_REG_2X16BIT)
+		val |= __raw_readw(addr + 2) << 16;
+
 	return val;
 }
 
 static void omap1_clear_lch_regs(int lch)
 {
-	int i = dma_common_ch_start;
+	int i;
 
-	for (; i <= dma_common_ch_end; i += 1)
+	for (i = CPC; i <= COLOR; i += 1)
 		dma_write(0, i, lch);
 }
 
@@ -255,8 +243,9 @@ static void omap1_show_dma_caps(void)
 	return;
 }
 
-static u32 configure_dma_errata(void)
+static unsigned configure_dma_errata(void)
 {
+	unsigned errata = 0;
 
 	/*
 	 * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
@@ -272,11 +261,23 @@ static const struct platform_device_info omap_dma_dev_info = {
 	.name = "omap-dma-engine",
 	.id = -1,
 	.dma_mask = DMA_BIT_MASK(32),
+	.res = res,
+	.num_res = 1,
+};
+
+static struct omap_system_dma_plat_info dma_plat_info __initdata = {
+	.reg_map	= reg_map,
+	.channel_stride	= 0x40,
+	.show_dma_caps	= omap1_show_dma_caps,
+	.clear_lch_regs	= omap1_clear_lch_regs,
+	.clear_dma	= omap1_clear_dma,
+	.dma_write	= dma_write,
+	.dma_read	= dma_read,
 };
 
 static int __init omap1_system_dma_init(void)
 {
-	struct omap_system_dma_plat_info	*p;
+	struct omap_system_dma_plat_info	p;
 	struct omap_dma_dev_attr		*d;
 	struct platform_device			*pdev, *dma_pdev;
 	int ret;
@@ -302,20 +303,12 @@ static int __init omap1_system_dma_init(void)
 		goto exit_iounmap;
 	}
 
-	p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
-	if (!p) {
-		dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
-			__func__, pdev->name);
-		ret = -ENOMEM;
-		goto exit_iounmap;
-	}
-
 	d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
 	if (!d) {
 		dev_err(&pdev->dev, "%s: Unable to allocate 'd' for %s\n",
 			__func__, pdev->name);
 		ret = -ENOMEM;
-		goto exit_release_p;
+		goto exit_iounmap;
 	}
 
 	d->lch_count		= OMAP1_LOGICAL_DMA_CH_COUNT;
@@ -336,17 +329,6 @@ static int __init omap1_system_dma_init(void)
 	d->dev_caps		|= CLEAR_CSR_ON_READ;
 	d->dev_caps		|= IS_WORD_16;
 
-
-	d->chan = kzalloc(sizeof(struct omap_dma_lch) *
-					(d->lch_count), GFP_KERNEL);
-	if (!d->chan) {
-		dev_err(&pdev->dev,
-			"%s: Memory allocation failed for d->chan!\n",
-			__func__);
-		ret = -ENOMEM;
-		goto exit_release_d;
-	}
-
 	if (cpu_is_omap15xx())
 		d->chan_count = 9;
 	else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
@@ -356,35 +338,24 @@ static int __init omap1_system_dma_init(void)
 			d->chan_count = 9;
 	}
 
-	p->dma_attr = d;
-
-	p->show_dma_caps	= omap1_show_dma_caps;
-	p->clear_lch_regs	= omap1_clear_lch_regs;
-	p->clear_dma		= omap1_clear_dma;
-	p->dma_write		= dma_write;
-	p->dma_read		= dma_read;
-	p->disable_irq_lch	= NULL;
-
-	p->errata = configure_dma_errata();
+	p = dma_plat_info;
+	p.dma_attr = d;
+	p.errata = configure_dma_errata();
 
-	ret = platform_device_add_data(pdev, p, sizeof(*p));
+	ret = platform_device_add_data(pdev, &p, sizeof(p));
 	if (ret) {
 		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
 			__func__, pdev->name, pdev->id);
-		goto exit_release_chan;
+		goto exit_release_d;
 	}
 
 	ret = platform_device_add(pdev);
 	if (ret) {
 		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
 			__func__, pdev->name, pdev->id);
-		goto exit_release_chan;
+		goto exit_release_d;
 	}
 
-	dma_stride		= OMAP1_DMA_STRIDE;
-	dma_common_ch_start	= CPC;
-	dma_common_ch_end	= COLOR;
-
 	dma_pdev = platform_device_register_full(&omap_dma_dev_info);
 	if (IS_ERR(dma_pdev)) {
 		ret = PTR_ERR(dma_pdev);
@@ -395,12 +366,8 @@ static int __init omap1_system_dma_init(void)
 
 exit_release_pdev:
 	platform_device_del(pdev);
-exit_release_chan:
-	kfree(d->chan);
 exit_release_d:
 	kfree(d);
-exit_release_p:
-	kfree(p);
 exit_iounmap:
 	iounmap(dma_base);
 exit_device_put:
diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h
deleted file mode 100644
index 4793790d53cc..000000000000
--- a/arch/arm/mach-omap1/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/timex.h
- */
-
-#include <plat/timex.h>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 40a1ae319610..34b4c0044961 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -71,7 +71,11 @@ static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
-#ifdef CONFIG_OMAP_32K_TIMER
+#ifndef CONFIG_OMAP_32K_TIMER
+
+static unsigned short enable_dyn_sleep = 0;
+
+#else
 
 static unsigned short enable_dyn_sleep = 1;
 
@@ -119,19 +123,8 @@ void omap1_pm_idle(void)
 #warning Enable 32kHz OS timer in order to allow sleep states in idle
 	use_idlect1 = use_idlect1 & ~(1 << 9);
 #else
-
-	while (enable_dyn_sleep) {
-
-#ifdef CONFIG_CBUS_TAHVO_USB
-		extern int vbus_active;
-		/* Clock requirements? */
-		if (vbus_active)
-			break;
-#endif
+	if (enable_dyn_sleep)
 		do_sleep = 1;
-		break;
-	}
-
 #endif
 
 #ifdef CONFIG_OMAP_DM_TIMER
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 0af7ca02314d..0ba482638ebf 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -6,7 +6,6 @@ config ARCH_OMAP2
 	depends on ARCH_MULTI_V6
 	select ARCH_OMAP2PLUS
 	select CPU_V6
-	select MULTI_IRQ_HANDLER
 	select SOC_HAS_OMAP2_SDRC
 
 config ARCH_OMAP3
@@ -15,13 +14,10 @@ config ARCH_OMAP3
 	select ARCH_OMAP2PLUS
 	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
-	select CPU_V7
-	select MULTI_IRQ_HANDLER
 	select OMAP_INTERCONNECT
 	select PM_OPP if PM
 	select PM_RUNTIME if CPU_IDLE
 	select SOC_HAS_OMAP2_SDRC
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
@@ -33,16 +29,13 @@ config ARCH_OMAP4
 	select ARM_ERRATA_720789
 	select ARM_GIC
 	select CACHE_L2X0
-	select CPU_V7
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
 	select OMAP_INTERCONNECT
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
 	select PM_OPP if PM
 	select PM_RUNTIME if CPU_IDLE
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 
@@ -53,10 +46,8 @@ config SOC_OMAP5
 	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
-	select CPU_V7
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP
 
@@ -66,18 +57,15 @@ config SOC_AM33XX
 	select ARCH_OMAP2PLUS
 	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
-	select CPU_V7
-	select MULTI_IRQ_HANDLER
 
 config SOC_AM43XX
 	bool "TI AM43x"
 	depends on ARCH_MULTI_V7
-	select CPU_V7
 	select ARCH_OMAP2PLUS
 	select ARCH_HAS_OPP
-	select MULTI_IRQ_HANDLER
 	select ARM_GIC
 	select MACH_OMAP_GENERIC
+	select MIGHT_HAVE_CACHE_L2X0
 
 config SOC_DRA7XX
 	bool "TI DRA7XX"
@@ -86,9 +74,8 @@ config SOC_DRA7XX
 	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
-	select CPU_V7
-	select HAVE_SMP
 	select HAVE_ARM_ARCH_TIMER
+	select IRQ_CROSSBAR
 
 config ARCH_OMAP2PLUS
 	bool
@@ -98,17 +85,12 @@ config ARCH_OMAP2PLUS
 	select ARCH_OMAP
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select MACH_OMAP_GENERIC
 	select OMAP_DM_TIMER
 	select PINCTRL
-	select PROC_DEVICETREE if PROC_FS
 	select SOC_BUS
-	select SPARSE_IRQ
 	select TI_PRIV_EDMA
-	select USE_OF
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
 
@@ -169,12 +151,6 @@ config SOC_TI81XX
 	depends on ARCH_OMAP3
 	default y
 
-config OMAP_PACKAGE_ZAF
-       bool
-
-config OMAP_PACKAGE_ZAC
-       bool
-
 config OMAP_PACKAGE_CBC
        bool
 
@@ -284,7 +260,6 @@ config MACH_NOKIA_N8X0
 	default y
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
-	select OMAP_PACKAGE_ZAC
 
 config MACH_NOKIA_RX51
 	bool "Nokia N900 (RX-51) phone"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index e6eec6f72fd3..8421f38cf445 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -60,6 +60,7 @@ AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 obj-$(CONFIG_SOC_OMAP2420)		+= omap2-restart.o
 obj-$(CONFIG_SOC_OMAP2430)		+= omap2-restart.o
 obj-$(CONFIG_SOC_AM33XX)		+= am33xx-restart.o
+obj-$(CONFIG_SOC_AM43XX)		+= omap4-restart.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap3-restart.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap4-restart.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap4-restart.o
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
index 25b79a297365..6a6935caac1e 100644
--- a/arch/arm/mach-omap2/am35xx-emac.c
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -17,7 +17,6 @@
 
 #include <linux/err.h>
 #include <linux/davinci_emac.h>
-#include <asm/system.h>
 #include "omap_device.h"
 #include "am35xx.h"
 #include "control.h"
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 543d9a882de3..4f9383cecf76 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -262,12 +262,7 @@ static struct usbhs_phy_data phy_data[] __initdata = {
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
-		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-#else
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-#endif
 };
 
 #ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 8dd0ec858cf1..018353d88b96 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -16,6 +16,8 @@
  *
  */
 
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -542,8 +544,22 @@ static struct isp_platform_data cm_t35_isp_pdata = {
 	.subdevs = cm_t35_isp_subdevs,
 };
 
+static struct regulator_consumer_supply cm_t35_camera_supplies[] = {
+	REGULATOR_SUPPLY("vaa", "3-005d"),
+	REGULATOR_SUPPLY("vdd", "3-005d"),
+};
+
 static void __init cm_t35_init_camera(void)
 {
+	struct clk *clk;
+
+	clk = clk_register_fixed_rate(NULL, "mt9t001-clkin", NULL, CLK_IS_ROOT,
+				      48000000);
+	clk_register_clkdev(clk, NULL, "3-005d");
+
+	regulator_register_fixed(2, cm_t35_camera_supplies,
+				 ARRAY_SIZE(cm_t35_camera_supplies));
+
 	if (omap3_init_camera(&cm_t35_isp_pdata) < 0)
 		pr_warn("CM-T3x: Failed registering camera device!\n");
 }
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index ac82512b9c8c..e87f2a83d6bf 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
 	board_nand_data.nr_parts	= nr_parts;
 	board_nand_data.devsize		= nand_type;
 
-	board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
+	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW;
 	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
@@ -160,13 +160,13 @@ static u8 get_gpmc0_type(void)
 	if (!fpga_map_addr)
 		return -ENOMEM;
 
-	if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV)))
+	if (!(readw_relaxed(fpga_map_addr + REG_FPGA_REV)))
 		/* we dont have an DEBUG FPGA??? */
 		/* Depend on #defines!! default to strata boot return param */
 		goto unmap;
 
 	/* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
-	cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
+	cs = readw_relaxed(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
 
 	/* ES2.0 SDP's onwards 4 dip switches are provided for CS */
 	if (omap_rev() >= OMAP3430_REV_ES1_0)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 8e3daa11602b..9480997ba616 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -35,11 +35,15 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
 
 static void __init omap_generic_init(void)
 {
+	omapdss_early_init_of();
+
 	pdata_quirks_init(omap_dt_match_table);
+
+	omapdss_init_of();
 }
 
 #ifdef CONFIG_SOC_OMAP2420
-static const char *omap242x_boards_compat[] __initdata = {
+static const char *omap242x_boards_compat[] __initconst = {
 	"ti,omap2420",
 	NULL,
 };
@@ -58,7 +62,7 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_SOC_OMAP2430
-static const char *omap243x_boards_compat[] __initdata = {
+static const char *omap243x_boards_compat[] __initconst = {
 	"ti,omap2430",
 	NULL,
 };
@@ -77,7 +81,7 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
-static const char *omap3_boards_compat[] __initdata = {
+static const char *omap3_boards_compat[] __initconst = {
 	"ti,omap3430",
 	"ti,omap3",
 	NULL,
@@ -96,7 +100,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.restart	= omap3xxx_restart,
 MACHINE_END
 
-static const char *omap36xx_boards_compat[] __initdata = {
+static const char *omap36xx_boards_compat[] __initconst = {
 	"ti,omap36xx",
 	NULL,
 };
@@ -114,7 +118,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
 	.restart	= omap3xxx_restart,
 MACHINE_END
 
-static const char *omap3_gp_boards_compat[] __initdata = {
+static const char *omap3_gp_boards_compat[] __initconst = {
 	"ti,omap3-beagle",
 	"timll,omap3-devkit8000",
 	NULL,
@@ -133,7 +137,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
 	.restart	= omap3xxx_restart,
 MACHINE_END
 
-static const char *am3517_boards_compat[] __initdata = {
+static const char *am3517_boards_compat[] __initconst = {
 	"ti,am3517",
 	NULL,
 };
@@ -153,7 +157,7 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_SOC_AM33XX
-static const char *am33xx_boards_compat[] __initdata = {
+static const char *am33xx_boards_compat[] __initconst = {
 	"ti,am33xx",
 	NULL,
 };
@@ -173,7 +177,7 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-static const char *omap4_boards_compat[] __initdata = {
+static const char *omap4_boards_compat[] __initconst = {
 	"ti,omap4460",
 	"ti,omap4430",
 	"ti,omap4",
@@ -195,7 +199,7 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_SOC_OMAP5
-static const char *omap5_boards_compat[] __initdata = {
+static const char *omap5_boards_compat[] __initconst = {
 	"ti,omap5432",
 	"ti,omap5430",
 	"ti,omap5",
@@ -217,7 +221,7 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_SOC_AM43XX
-static const char *am43_boards_compat[] __initdata = {
+static const char *am43_boards_compat[] __initconst = {
 	"ti,am4372",
 	"ti,am43",
 	NULL,
@@ -229,19 +233,20 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
 	.init_late	= am43xx_init_late,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap3_sync32k_timer_init,
+	.init_time	= omap3_gptimer_timer_init,
 	.dt_compat	= am43_boards_compat,
+	.restart	= omap44xx_restart,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_SOC_DRA7XX
-static const char *dra7xx_boards_compat[] __initdata = {
-	"ti,dra7xx",
+static const char *dra74x_boards_compat[] __initconst = {
+	"ti,dra742",
 	"ti,dra7",
 	NULL,
 };
 
-DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)")
+DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
 	.reserve	= omap_reserve,
 	.smp		= smp_ops(omap4_smp_ops),
 	.map_io		= omap5_map_io,
@@ -250,7 +255,24 @@ DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)")
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
 	.init_time	= omap5_realtime_timer_init,
-	.dt_compat	= dra7xx_boards_compat,
+	.dt_compat	= dra74x_boards_compat,
+	.restart	= omap44xx_restart,
+MACHINE_END
+
+static const char *dra72x_boards_compat[] __initconst = {
+	"ti,dra722",
+	NULL,
+};
+
+DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap5_map_io,
+	.init_early	= dra7xx_init_early,
+	.init_late	= dra7xx_init_late,
+	.init_irq	= omap_gic_of_init,
+	.init_machine	= omap_generic_init,
+	.init_time	= omap5_realtime_timer_init,
+	.dt_compat	= dra72x_boards_compat,
 	.restart	= omap44xx_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index d6ed819ff15c..660bfc5a70d7 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -33,7 +33,6 @@
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
 #include <linux/usb/phy.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index de1bc6bbe585..cf18340eb3bb 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -536,11 +536,13 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 
 static void __init pandora_wl1251_init(void)
 {
-	struct wl12xx_platform_data pandora_wl1251_pdata;
+	struct wl1251_platform_data pandora_wl1251_pdata;
 	int ret;
 
 	memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
 
+	pandora_wl1251_pdata.power_gpio = -1;
+
 	ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
 	if (ret < 0)
 		goto fail;
@@ -550,7 +552,7 @@ static void __init pandora_wl1251_init(void)
 		goto fail_irq;
 
 	pandora_wl1251_pdata.use_eeprom = true;
-	ret = wl12xx_set_platform_data(&pandora_wl1251_pdata);
+	ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
 	if (ret < 0)
 		goto fail_irq;
 
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 119efaf5808a..a2e035e0792a 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -121,11 +121,7 @@ static struct platform_device omap3stalker_tfp410_device = {
 static struct connector_atv_platform_data omap3stalker_tv_pdata = {
 	.name = "tv",
 	.source = "venc.0",
-#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
 	.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
-#endif
 	.invert_polarity = false,
 };
 
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 8760bbe3baab..ddfc8df83c6a 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -84,7 +84,7 @@ enum {
 	RX51_SPI_MIPID,		/* LCD panel */
 };
 
-static struct wl12xx_platform_data wl1251_pdata;
+static struct wl1251_platform_data wl1251_pdata;
 static struct tsc2005_platform_data tsc2005_pdata;
 
 #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
@@ -1173,13 +1173,7 @@ static inline void board_smc91x_init(void)
 
 #endif
 
-static void rx51_wl1251_set_power(bool enable)
-{
-	gpio_set_value(RX51_WL1251_POWER_GPIO, enable);
-}
-
 static struct gpio rx51_wl1251_gpios[] __initdata = {
-	{ RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW,	"wl1251 power"	},
 	{ RX51_WL1251_IRQ_GPIO,	  GPIOF_IN,		"wl1251 irq"	},
 };
 
@@ -1196,17 +1190,16 @@ static void __init rx51_init_wl1251(void)
 	if (irq < 0)
 		goto err_irq;
 
-	wl1251_pdata.set_power = rx51_wl1251_set_power;
+	wl1251_pdata.power_gpio = RX51_WL1251_POWER_GPIO;
 	rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
 
 	return;
 
 err_irq:
 	gpio_free(RX51_WL1251_IRQ_GPIO);
-	gpio_free(RX51_WL1251_POWER_GPIO);
 error:
 	printk(KERN_ERR "wl1251 board initialisation failed\n");
-	wl1251_pdata.set_power = NULL;
+	wl1251_pdata.power_gpio = -1;
 
 	/*
 	 * Now rx51_peripherals_spi_board_info[1].irq is zero and
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index 43a90c8d6837..9cfebc5c7455 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -48,7 +48,7 @@ static struct omap_dss_board_info rx51_dss_board_info = {
 
 static int __init rx51_video_init(void)
 {
-	if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900"))
+	if (!machine_is_nokia_rx51())
 		return 0;
 
 	if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index 11ed9152e665..eb8c75ec3b1a 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -456,7 +456,8 @@ static struct clk_hw_omap dpll4_m5x2_ck_hw = {
 	.clkdm_name	= "dpll4_clkdm",
 };
 
-DEFINE_STRUCT_CLK(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names, dpll4_m5x2_ck_ops);
+DEFINE_STRUCT_CLK_FLAGS(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names,
+			dpll4_m5x2_ck_ops, CLK_SET_RATE_PARENT);
 
 static struct clk dpll4_m5x2_ck_3630 = {
 	.name		= "dpll4_m5x2_ck",
@@ -3497,10 +3498,6 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"dss_tv_fck",	&dss_tv_fck),
 	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck),
 	CLK(NULL,	"dss2_alwon_fck",	&dss2_alwon_fck),
-	CLK(NULL,	"utmi_p1_gfclk",	&dummy_ck),
-	CLK(NULL,	"utmi_p2_gfclk",	&dummy_ck),
-	CLK(NULL,	"xclk60mhsp1_ck",	&dummy_ck),
-	CLK(NULL,	"xclk60mhsp2_ck",	&dummy_ck),
 	CLK(NULL,	"init_60m_fclk",	&dummy_ck),
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck),
 	CLK(NULL,	"aes2_ick",	&aes2_ick),
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
index 3ff32543493c..59cf310bc1e9 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -138,7 +138,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate,
 		if (!dd)
 			return -EINVAL;
 
-		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
+		tmpset.cm_clksel1_pll = readl_relaxed(dd->mult_div1_reg);
 		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
 					   dd->div1_mask);
 		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c
index 19f54d433490..0717dff1bc04 100644
--- a/arch/arm/mach-omap2/clkt2xxx_osc.c
+++ b/arch/arm/mach-omap2/clkt2xxx_osc.c
@@ -39,9 +39,9 @@ int omap2_enable_osc_ck(struct clk_hw *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(prcm_clksrc_ctrl);
+	pcc = readl_relaxed(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+	writel_relaxed(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 
 	return 0;
 }
@@ -57,9 +57,9 @@ void omap2_disable_osc_ck(struct clk_hw *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(prcm_clksrc_ctrl);
+	pcc = readl_relaxed(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+	writel_relaxed(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 }
 
 unsigned long omap2_osc_clk_recalc(struct clk_hw *clk,
diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c
index f467d072cd02..58dd3a9b726c 100644
--- a/arch/arm/mach-omap2/clkt2xxx_sys.c
+++ b/arch/arm/mach-omap2/clkt2xxx_sys.c
@@ -33,7 +33,7 @@ u32 omap2xxx_get_sysclkdiv(void)
 {
 	u32 div;
 
-	div = __raw_readl(prcm_clksrc_ctrl);
+	div = readl_relaxed(prcm_clksrc_ctrl);
 	div &= OMAP_SYSCLKDIV_MASK;
 	div >>= OMAP_SYSCLKDIV_SHIFT;
 
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 47f9562ca7aa..332af927f4d3 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -209,7 +209,7 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw)
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
 			return 1;
-	} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
+	} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) {
 		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
@@ -255,7 +255,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
 			return __clk_get_rate(dd->clk_bypass);
-	} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
+	} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) {
 		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
@@ -306,7 +306,7 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 
 	ref_rate = __clk_get_rate(dd->clk_ref);
 	clk_name = __clk_get_name(hw->clk);
-	pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
+	pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
 		 clk_name, target_rate);
 
 	scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
@@ -342,7 +342,7 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 		if (r == DPLL_MULT_UNDERFLOW)
 			continue;
 
-		pr_debug("clock: %s: m = %d: n = %d: new_rate = %ld\n",
+		pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
 			 clk_name, m, n, new_rate);
 
 		if (target_rate == new_rate) {
@@ -354,7 +354,7 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 	}
 
 	if (target_rate != new_rate) {
-		pr_debug("clock: %s: cannot round to rate %ld\n",
+		pr_debug("clock: %s: cannot round to rate %lu\n",
 			 clk_name, target_rate);
 		return ~0;
 	}
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index f17f00697cc0..82c37b1becc4 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -18,7 +18,6 @@
 
 #include "powerdomain.h"
 #include "clock.h"
-#include "omap_hwmod.h"
 
 /*
  * Clockdomain flags
@@ -98,6 +97,8 @@ struct clkdm_dep {
 /* Possible flags for struct clockdomain._flags */
 #define _CLKDM_FLAG_HWSUP_ENABLED		BIT(0)
 
+struct omap_hwmod;
+
 /**
  * struct clockdomain - OMAP clockdomain
  * @name: clockdomain name
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
index e6b91e552d3d..f03dc97921ad 100644
--- a/arch/arm/mach-omap2/clockdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -247,7 +247,7 @@ static struct clockdomain neon_clkdm = {
 static struct clockdomain iva2_clkdm = {
 	.name		= "iva2_clkdm",
 	.pwrdm		= { .name = "iva2_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.flags		= CLKDM_CAN_SWSUP,
 	.dep_bit	= OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
 	.wkdep_srcs	= iva2_wkdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
index ce25abbcffae..8be6ea50c092 100644
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -18,9 +18,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "soc.h"
-#include "iomap.h"
-#include "common.h"
 #include "prm2xxx.h"
 #include "cm.h"
 #include "cm2xxx.h"
@@ -390,7 +387,7 @@ void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm)
 	tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) &
 		OMAP24XX_CLKSEL_DSS2_MASK;
 	omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1);
-	if (cpu_is_omap2430())
+	if (mdm)
 		omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL);
 }
 
@@ -405,19 +402,11 @@ static struct cm_ll_data omap2xxx_cm_ll_data = {
 
 int __init omap2xxx_cm_init(void)
 {
-	if (!cpu_is_omap24xx())
-		return 0;
-
 	return cm_register(&omap2xxx_cm_ll_data);
 }
 
 static void __exit omap2xxx_cm_exit(void)
 {
-	if (!cpu_is_omap24xx())
-		return;
-
-	/* Should never happen */
-	WARN(cm_unregister(&omap2xxx_cm_ll_data),
-	     "%s: cm_ll_data function pointer mismatch\n", __func__);
+	cm_unregister(&omap2xxx_cm_ll_data);
 }
 __exitcall(omap2xxx_cm_exit);
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h
index bfbd16fe9151..72928a3ce2aa 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h
@@ -52,12 +52,12 @@
 
 static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
 {
-	return __raw_readl(cm_base + module + idx);
+	return readl_relaxed(cm_base + module + idx);
 }
 
 static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
 {
-	__raw_writel(val, cm_base + module + idx);
+	writel_relaxed(val, cm_base + module + idx);
 }
 
 /* Read-modify-write a register in a CM module. Caller must lock */
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 40a22e5649ae..b3f99e93def0 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -50,13 +50,13 @@
 /* Read a register in a CM instance */
 static inline u32 am33xx_cm_read_reg(u16 inst, u16 idx)
 {
-	return __raw_readl(cm_base + inst + idx);
+	return readl_relaxed(cm_base + inst + idx);
 }
 
 /* Write into a register in a CM */
 static inline void am33xx_cm_write_reg(u32 val, u16 inst, u16 idx)
 {
-	__raw_writel(val, cm_base + inst + idx);
+	writel_relaxed(val, cm_base + inst + idx);
 }
 
 /* Read-modify-write a register in CM */
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
index cfb8891b0c0e..15a778ce7707 100644
--- a/arch/arm/mach-omap2/cm33xx.h
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -17,11 +17,8 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM_33XX_H
 
-#include "common.h"
-
 #include "cm.h"
 #include "cm-regbits-33xx.h"
-#include "iomap.h"
 
 /* CM base address */
 #define AM33XX_CM_BASE		0x44e00000
diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
index f6f028867bfe..129a4e7f6ef5 100644
--- a/arch/arm/mach-omap2/cm3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -18,9 +18,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "soc.h"
-#include "iomap.h"
-#include "common.h"
 #include "prm2xxx_3xxx.h"
 #include "cm.h"
 #include "cm3xxx.h"
@@ -388,7 +385,8 @@ void omap3_cm_save_context(void)
 		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1);
 	cm_context.iva2_cm_clksel2 =
 		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2);
-	cm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
+	cm_context.cm_sysconfig =
+		omap2_cm_read_mod_reg(OCP_MOD, OMAP3430_CM_SYSCONFIG);
 	cm_context.sgx_cm_clksel =
 		omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
 	cm_context.dss_cm_clksel =
@@ -418,7 +416,8 @@ void omap3_cm_save_context(void)
 		omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
 	cm_context.pll_cm_clken2 =
 		omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
-	cm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
+	cm_context.cm_polctrl =
+		omap2_cm_read_mod_reg(OCP_MOD, OMAP3430_CM_POLCTRL);
 	cm_context.iva2_cm_fclken =
 		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN);
 	cm_context.iva2_cm_clken_pll =
@@ -519,7 +518,8 @@ void omap3_cm_restore_context(void)
 			       CM_CLKSEL1);
 	omap2_cm_write_mod_reg(cm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD,
 			       CM_CLKSEL2);
-	__raw_writel(cm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
+	omap2_cm_write_mod_reg(cm_context.cm_sysconfig, OCP_MOD,
+			       OMAP3430_CM_SYSCONFIG);
 	omap2_cm_write_mod_reg(cm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
 			       CM_CLKSEL);
 	omap2_cm_write_mod_reg(cm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
@@ -547,7 +547,8 @@ void omap3_cm_restore_context(void)
 			       OMAP3430ES2_CM_CLKSEL5);
 	omap2_cm_write_mod_reg(cm_context.pll_cm_clken2, PLL_MOD,
 			       OMAP3430ES2_CM_CLKEN2);
-	__raw_writel(cm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
+	omap2_cm_write_mod_reg(cm_context.cm_polctrl, OCP_MOD,
+			       OMAP3430_CM_POLCTRL);
 	omap2_cm_write_mod_reg(cm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD,
 			       CM_FCLKEN);
 	omap2_cm_write_mod_reg(cm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD,
@@ -669,19 +670,11 @@ static struct cm_ll_data omap3xxx_cm_ll_data = {
 
 int __init omap3xxx_cm_init(void)
 {
-	if (!cpu_is_omap34xx())
-		return 0;
-
 	return cm_register(&omap3xxx_cm_ll_data);
 }
 
 static void __exit omap3xxx_cm_exit(void)
 {
-	if (!cpu_is_omap34xx())
-		return;
-
-	/* Should never happen */
-	WARN(cm_unregister(&omap3xxx_cm_ll_data),
-	     "%s: cm_ll_data function pointer mismatch\n", __func__);
+	cm_unregister(&omap3xxx_cm_ll_data);
 }
 __exitcall(omap3xxx_cm_exit);
diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h
index 8224c91b4d7a..7a16b5598127 100644
--- a/arch/arm/mach-omap2/cm3xxx.h
+++ b/arch/arm/mach-omap2/cm3xxx.h
@@ -29,9 +29,8 @@
  * These registers appear once per CM module.
  */
 
-#define OMAP3430_CM_REVISION		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL		OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3430_CM_SYSCONFIG		0x0010
+#define OMAP3430_CM_POLCTRL		0x009c
 
 #define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
 #define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c
index 535d66e2822c..fe5cc7bae489 100644
--- a/arch/arm/mach-omap2/cm44xx.c
+++ b/arch/arm/mach-omap2/cm44xx.c
@@ -18,35 +18,32 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "iomap.h"
-#include "common.h"
 #include "cm.h"
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
-#include "cm-regbits-44xx.h"
 
 /* CM1 hardware module low-level functions */
 
 /* Read a register in CM1 */
 u32 omap4_cm1_read_inst_reg(s16 inst, u16 reg)
 {
-	return __raw_readl(OMAP44XX_CM1_REGADDR(inst, reg));
+	return readl_relaxed(cm_base + inst + reg);
 }
 
 /* Write into a register in CM1 */
 void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 reg)
 {
-	__raw_writel(val, OMAP44XX_CM1_REGADDR(inst, reg));
+	writel_relaxed(val, cm_base + inst + reg);
 }
 
 /* Read a register in CM2 */
 u32 omap4_cm2_read_inst_reg(s16 inst, u16 reg)
 {
-	return __raw_readl(OMAP44XX_CM2_REGADDR(inst, reg));
+	return readl_relaxed(cm2_base + inst + reg);
 }
 
 /* Write into a register in CM2 */
 void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 reg)
 {
-	__raw_writel(val, OMAP44XX_CM2_REGADDR(inst, reg));
+	writel_relaxed(val, cm2_base + inst + reg);
 }
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index 40b3b5a84458..8f6c4710877e 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -14,11 +14,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/bug.h>
 
 #include "cm2xxx.h"
 #include "cm3xxx.h"
 #include "cm44xx.h"
-#include "common.h"
 
 /*
  * cm_ll_data: function pointers to SoC-specific implementations of
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 731ca134348c..12aca56942c0 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -21,8 +21,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "iomap.h"
-#include "common.h"
 #include "clockdomain.h"
 #include "cm.h"
 #include "cm1_44xx.h"
@@ -30,12 +28,18 @@
 #include "cm44xx.h"
 #include "cminst44xx.h"
 #include "cm-regbits-34xx.h"
-#include "cm-regbits-44xx.h"
 #include "prcm44xx.h"
 #include "prm44xx.h"
 #include "prcm_mpu44xx.h"
 #include "prcm-common.h"
 
+#define OMAP4430_IDLEST_SHIFT		16
+#define OMAP4430_IDLEST_MASK		(0x3 << 16)
+#define OMAP4430_CLKTRCTRL_SHIFT	0
+#define OMAP4430_CLKTRCTRL_MASK		(0x3 << 0)
+#define OMAP4430_MODULEMODE_SHIFT	0
+#define OMAP4430_MODULEMODE_MASK	(0x3 << 0)
+
 /*
  * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
  *
@@ -116,7 +120,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_cm_bases[part]);
-	return __raw_readl(_cm_bases[part] + inst + idx);
+	return readl_relaxed(_cm_bases[part] + inst + idx);
 }
 
 /* Write into a register in a CM instance */
@@ -125,7 +129,7 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_cm_bases[part]);
-	__raw_writel(val, _cm_bases[part] + inst + idx);
+	writel_relaxed(val, _cm_bases[part] + inst + idx);
 }
 
 /* Read-modify-write a register in CM1. Caller must lock */
@@ -254,6 +258,11 @@ void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs)
  *
  */
 
+void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs)
+{
+	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
+}
+
 /**
  * omap4_cminst_wait_module_ready - wait for a module to be in 'func' state
  * @part: PRCM partition ID that the CM_CLKCTRL register exists in
@@ -404,8 +413,17 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
 
 static int omap4_clkdm_sleep(struct clockdomain *clkdm)
 {
-	omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
+	if (clkdm->flags & CLKDM_CAN_HWSUP)
+		omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
+						clkdm->cm_inst,
+						clkdm->clkdm_offs);
+	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+		omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition,
+					       clkdm->cm_inst,
+					       clkdm->clkdm_offs);
+	else
+		return -EINVAL;
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index a6aae300542c..ff029737c8f0 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -91,6 +91,7 @@ extern void omap3_sync32k_timer_init(void);
 extern void omap3_secure_sync32k_timer_init(void);
 extern void omap3_gptimer_timer_init(void);
 extern void omap4_local_timer_init(void);
+int omap_l2_cache_init(void);
 extern void omap5_realtime_timer_init(void);
 
 void omap2420_init_early(void);
@@ -315,5 +316,8 @@ extern int omap_dss_reset(struct omap_hwmod *);
 /* SoC specific clock initializer */
 int omap_clk_init(void);
 
+int __init omapdss_init_of(void);
+void __init omapdss_early_init_of(void);
+
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 44bb4d544dcf..751f3549bf6f 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -151,32 +151,32 @@ void __iomem *omap_ctrl_base_get(void)
 
 u8 omap_ctrl_readb(u16 offset)
 {
-	return __raw_readb(OMAP_CTRL_REGADDR(offset));
+	return readb_relaxed(OMAP_CTRL_REGADDR(offset));
 }
 
 u16 omap_ctrl_readw(u16 offset)
 {
-	return __raw_readw(OMAP_CTRL_REGADDR(offset));
+	return readw_relaxed(OMAP_CTRL_REGADDR(offset));
 }
 
 u32 omap_ctrl_readl(u16 offset)
 {
-	return __raw_readl(OMAP_CTRL_REGADDR(offset));
+	return readl_relaxed(OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writeb(u8 val, u16 offset)
 {
-	__raw_writeb(val, OMAP_CTRL_REGADDR(offset));
+	writeb_relaxed(val, OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writew(u16 val, u16 offset)
 {
-	__raw_writew(val, OMAP_CTRL_REGADDR(offset));
+	writew_relaxed(val, OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writel(u32 val, u16 offset)
 {
-	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
+	writel_relaxed(val, OMAP_CTRL_REGADDR(offset));
 }
 
 /*
@@ -188,12 +188,12 @@ void omap_ctrl_writel(u32 val, u16 offset)
 
 u32 omap4_ctrl_pad_readl(u16 offset)
 {
-	return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset));
+	return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset));
 }
 
 void omap4_ctrl_pad_writel(u32 val, u16 offset)
 {
-	__raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset));
+	writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset));
 }
 
 #ifdef CONFIG_ARCH_OMAP3
@@ -222,7 +222,7 @@ void omap3_ctrl_write_boot_mode(u8 bootmode)
 	 *
 	 * XXX This should use some omap_ctrl_writel()-type function
 	 */
-	__raw_writel(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
+	writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
 }
 
 #endif
@@ -285,7 +285,7 @@ void omap3_clear_scratchpad_contents(void)
 	if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
 	    OMAP3430_GLOBAL_COLD_RST_MASK) {
 		for ( ; offset <= max_offset; offset += 0x4)
-			__raw_writel(0x0, (v_addr + offset));
+			writel_relaxed(0x0, (v_addr + offset));
 		omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
 					   OMAP3430_GR_MOD,
 					   OMAP3_PRM_RSTST_OFFSET);
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index 01fc710c8181..2498ab025fa2 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -14,6 +14,7 @@
 #include <linux/cpuidle.h>
 #include <linux/cpu_pm.h>
 #include <linux/export.h>
+#include <linux/clockchips.h>
 
 #include <asm/cpuidle.h>
 #include <asm/proc-fns.h>
@@ -83,6 +84,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 {
 	struct idle_statedata *cx = state_ptr + index;
 	u32 mpuss_can_lose_context = 0;
+	int cpu_id = smp_processor_id();
 
 	/*
 	 * CPU0 has to wait and stay ON until CPU1 is OFF state.
@@ -110,6 +112,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) &&
 				 (cx->mpu_logic_state == PWRDM_POWER_OFF);
 
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
+
 	/*
 	 * Call idle CPU PM enter notifier chain so that
 	 * VFP and per CPU interrupt context is saved.
@@ -165,6 +169,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	if (dev->cpu == 0 && mpuss_can_lose_context)
 		cpu_cluster_pm_exit();
 
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
+
 fail:
 	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
 	cpu_done[dev->cpu] = false;
@@ -172,6 +178,16 @@ fail:
 	return index;
 }
 
+/*
+ * For each cpu, setup the broadcast timer because local timers
+ * stops for the states above C1.
+ */
+static void omap_setup_broadcast_timer(void *arg)
+{
+	int cpu = smp_processor_id();
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
+}
+
 static struct cpuidle_driver omap4_idle_driver = {
 	.name				= "omap4_idle",
 	.owner				= THIS_MODULE,
@@ -189,8 +205,7 @@ static struct cpuidle_driver omap4_idle_driver = {
 			/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
 			.exit_latency = 328 + 440,
 			.target_residency = 960,
-			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
-			         CPUIDLE_FLAG_TIMER_STOP,
+			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
 			.enter = omap_enter_idle_coupled,
 			.name = "C2",
 			.desc = "CPUx OFF, MPUSS CSWR",
@@ -199,8 +214,7 @@ static struct cpuidle_driver omap4_idle_driver = {
 			/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
 			.exit_latency = 460 + 518,
 			.target_residency = 1100,
-			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
-			         CPUIDLE_FLAG_TIMER_STOP,
+			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
 			.enter = omap_enter_idle_coupled,
 			.name = "C3",
 			.desc = "CPUx OFF, MPUSS OSWR",
@@ -231,5 +245,8 @@ int __init omap4_idle_init(void)
 	if (!cpu_clkdm[0] || !cpu_clkdm[1])
 		return -ENODEV;
 
+	/* Configure the broadcast timer on each cpu */
+	on_each_cpu(omap_setup_broadcast_timer, NULL, 1);
+
 	return cpuidle_register(&omap4_idle_driver, cpu_online_mask);
 }
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 0dd6398bade4..592ba0a0ecf3 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
-#include <linux/platform_data/omap4-keypad.h>
 #include <linux/platform_data/mailbox-omap.h>
 
 #include <asm/mach-types.h>
@@ -29,7 +28,6 @@
 #include "iomap.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"
-#include "omap4-keypad.h"
 
 #include "soc.h"
 #include "common.h"
@@ -229,6 +227,9 @@ static struct omap_iommu_arch_data omap3_isp_iommu = {
 
 int omap3_init_camera(struct isp_platform_data *pdata)
 {
+	if (of_have_populated_dt())
+		omap3_isp_iommu.name = "480bd400.mmu";
+
 	omap3isp_device.dev.platform_data = pdata;
 	omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu;
 
@@ -252,37 +253,6 @@ static inline void omap_init_camera(void)
 #endif
 }
 
-int __init omap4_keyboard_init(struct omap4_keypad_platform_data
-			*sdp4430_keypad_data, struct omap_board_data *bdata)
-{
-	struct platform_device *pdev;
-	struct omap_hwmod *oh;
-	struct omap4_keypad_platform_data *keypad_data;
-	unsigned int id = -1;
-	char *oh_name = "kbd";
-	char *name = "omap4-keypad";
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up %s\n", oh_name);
-		return -ENODEV;
-	}
-
-	keypad_data = sdp4430_keypad_data;
-
-	pdev = omap_device_build(name, id, oh, keypad_data,
-				 sizeof(struct omap4_keypad_platform_data));
-
-	if (IS_ERR(pdev)) {
-		WARN(1, "Can't build omap_device for %s:%s.\n",
-						name, oh->name);
-		return PTR_ERR(pdev);
-	}
-	oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
-
-	return 0;
-}
-
 #if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
 static inline void __init omap_init_mbox(void)
 {
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 4cf165502b35..bf852d7ae951 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -23,6 +23,9 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
 
 #include <video/omapdss.h>
 #include "omap_hwmod.h"
@@ -276,6 +279,8 @@ static enum omapdss_version __init omap_display_get_version(void)
 		return OMAPDSS_VER_OMAP4;
 	else if (soc_is_omap54xx())
 		return OMAPDSS_VER_OMAP5;
+	else if (soc_is_am43xx())
+		return OMAPDSS_VER_AM43xx;
 	else
 		return OMAPDSS_VER_UNKNOWN;
 }
@@ -301,7 +306,6 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 	board_data->version = ver;
 	board_data->dsi_enable_pads = omap_dsi_enable_pads;
 	board_data->dsi_disable_pads = omap_dsi_disable_pads;
-	board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count;
 	board_data->set_min_bus_tput = omap_dss_set_min_bus_tput;
 
 	omap_display_device.dev.platform_data = board_data;
@@ -552,3 +556,114 @@ int omap_dss_reset(struct omap_hwmod *oh)
 
 	return r;
 }
+
+void __init omapdss_early_init_of(void)
+{
+
+}
+
+struct device_node * __init omapdss_find_dss_of_node(void)
+{
+	struct device_node *node;
+
+	node = of_find_compatible_node(NULL, NULL, "ti,omap2-dss");
+	if (node)
+		return node;
+
+	node = of_find_compatible_node(NULL, NULL, "ti,omap3-dss");
+	if (node)
+		return node;
+
+	node = of_find_compatible_node(NULL, NULL, "ti,omap4-dss");
+	if (node)
+		return node;
+
+	node = of_find_compatible_node(NULL, NULL, "ti,omap5-dss");
+	if (node)
+		return node;
+
+	return NULL;
+}
+
+int __init omapdss_init_of(void)
+{
+	int r;
+	enum omapdss_version ver;
+	struct device_node *node;
+	struct platform_device *pdev;
+
+	static struct omap_dss_board_info board_data = {
+		.dsi_enable_pads = omap_dsi_enable_pads,
+		.dsi_disable_pads = omap_dsi_disable_pads,
+		.set_min_bus_tput = omap_dss_set_min_bus_tput,
+	};
+
+	/* only create dss helper devices if dss is enabled in the .dts */
+
+	node = omapdss_find_dss_of_node();
+	if (!node)
+		return 0;
+
+	if (!of_device_is_available(node))
+		return 0;
+
+	ver = omap_display_get_version();
+
+	if (ver == OMAPDSS_VER_UNKNOWN) {
+		pr_err("DSS not supported on this SoC\n");
+		return -ENODEV;
+	}
+
+	pdev = of_find_device_by_node(node);
+
+	if (!pdev) {
+		pr_err("Unable to find DSS platform device\n");
+		return -ENODEV;
+	}
+
+	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	if (r) {
+		pr_err("Unable to populate DSS submodule devices\n");
+		return r;
+	}
+
+	board_data.version = ver;
+
+	omap_display_device.dev.platform_data = &board_data;
+
+	r = platform_device_register(&omap_display_device);
+	if (r < 0) {
+		pr_err("Unable to register omapdss device\n");
+		return r;
+	}
+
+	/* create DRM device */
+	r = omap_init_drm();
+	if (r < 0) {
+		pr_err("Unable to register omapdrm device\n");
+		return r;
+	}
+
+	/* create vrfb device */
+	r = omap_init_vrfb();
+	if (r < 0) {
+		pr_err("Unable to register omapvrfb device\n");
+		return r;
+	}
+
+	/* create FB device */
+	r = omap_init_fb();
+	if (r < 0) {
+		pr_err("Unable to register omapfb device\n");
+		return r;
+	}
+
+	/* create V4L2 display device */
+	r = omap_init_vout();
+	if (r < 0) {
+		pr_err("Unable to register omap_vout device\n");
+		return r;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h
index f3d2ce4bc262..7375854b16c7 100644
--- a/arch/arm/mach-omap2/display.h
+++ b/arch/arm/mach-omap2/display.h
@@ -30,4 +30,7 @@ int omap_init_drm(void);
 int omap_init_vrfb(void);
 int omap_init_fb(void);
 int omap_init_vout(void);
+
+struct device_node * __init omapdss_find_dss_of_node(void);
+
 #endif
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 49fd0d501c9b..a6d2cf1f8d02 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -35,97 +35,80 @@
 #include "omap_hwmod.h"
 #include "omap_device.h"
 
-#define OMAP2_DMA_STRIDE	0x60
-
-static u32 errata;
-static u8 dma_stride;
-
-static struct omap_dma_dev_attr *d;
-
-static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end;
-
-static u16 reg_map[] = {
-	[REVISION]		= 0x00,
-	[GCR]			= 0x78,
-	[IRQSTATUS_L0]		= 0x08,
-	[IRQSTATUS_L1]		= 0x0c,
-	[IRQSTATUS_L2]		= 0x10,
-	[IRQSTATUS_L3]		= 0x14,
-	[IRQENABLE_L0]		= 0x18,
-	[IRQENABLE_L1]		= 0x1c,
-	[IRQENABLE_L2]		= 0x20,
-	[IRQENABLE_L3]		= 0x24,
-	[SYSSTATUS]		= 0x28,
-	[OCP_SYSCONFIG]		= 0x2c,
-	[CAPS_0]		= 0x64,
-	[CAPS_2]		= 0x6c,
-	[CAPS_3]		= 0x70,
-	[CAPS_4]		= 0x74,
+static enum omap_reg_offsets dma_common_ch_end;
+
+static const struct omap_dma_reg reg_map[] = {
+	[REVISION]	= { 0x0000, 0x00, OMAP_DMA_REG_32BIT },
+	[GCR]		= { 0x0078, 0x00, OMAP_DMA_REG_32BIT },
+	[IRQSTATUS_L0]	= { 0x0008, 0x00, OMAP_DMA_REG_32BIT },
+	[IRQSTATUS_L1]	= { 0x000c, 0x00, OMAP_DMA_REG_32BIT },
+	[IRQSTATUS_L2]	= { 0x0010, 0x00, OMAP_DMA_REG_32BIT },
+	[IRQSTATUS_L3]	= { 0x0014, 0x00, OMAP_DMA_REG_32BIT },
+	[IRQENABLE_L0]	= { 0x0018, 0x00, OMAP_DMA_REG_32BIT },
+	[IRQENABLE_L1]	= { 0x001c, 0x00, OMAP_DMA_REG_32BIT },
+	[IRQENABLE_L2]	= { 0x0020, 0x00, OMAP_DMA_REG_32BIT },
+	[IRQENABLE_L3]	= { 0x0024, 0x00, OMAP_DMA_REG_32BIT },
+	[SYSSTATUS]	= { 0x0028, 0x00, OMAP_DMA_REG_32BIT },
+	[OCP_SYSCONFIG]	= { 0x002c, 0x00, OMAP_DMA_REG_32BIT },
+	[CAPS_0]	= { 0x0064, 0x00, OMAP_DMA_REG_32BIT },
+	[CAPS_2]	= { 0x006c, 0x00, OMAP_DMA_REG_32BIT },
+	[CAPS_3]	= { 0x0070, 0x00, OMAP_DMA_REG_32BIT },
+	[CAPS_4]	= { 0x0074, 0x00, OMAP_DMA_REG_32BIT },
 
 	/* Common register offsets */
-	[CCR]			= 0x80,
-	[CLNK_CTRL]		= 0x84,
-	[CICR]			= 0x88,
-	[CSR]			= 0x8c,
-	[CSDP]			= 0x90,
-	[CEN]			= 0x94,
-	[CFN]			= 0x98,
-	[CSEI]			= 0xa4,
-	[CSFI]			= 0xa8,
-	[CDEI]			= 0xac,
-	[CDFI]			= 0xb0,
-	[CSAC]			= 0xb4,
-	[CDAC]			= 0xb8,
+	[CCR]		= { 0x0080, 0x60, OMAP_DMA_REG_32BIT },
+	[CLNK_CTRL]	= { 0x0084, 0x60, OMAP_DMA_REG_32BIT },
+	[CICR]		= { 0x0088, 0x60, OMAP_DMA_REG_32BIT },
+	[CSR]		= { 0x008c, 0x60, OMAP_DMA_REG_32BIT },
+	[CSDP]		= { 0x0090, 0x60, OMAP_DMA_REG_32BIT },
+	[CEN]		= { 0x0094, 0x60, OMAP_DMA_REG_32BIT },
+	[CFN]		= { 0x0098, 0x60, OMAP_DMA_REG_32BIT },
+	[CSEI]		= { 0x00a4, 0x60, OMAP_DMA_REG_32BIT },
+	[CSFI]		= { 0x00a8, 0x60, OMAP_DMA_REG_32BIT },
+	[CDEI]		= { 0x00ac, 0x60, OMAP_DMA_REG_32BIT },
+	[CDFI]		= { 0x00b0, 0x60, OMAP_DMA_REG_32BIT },
+	[CSAC]		= { 0x00b4, 0x60, OMAP_DMA_REG_32BIT },
+	[CDAC]		= { 0x00b8, 0x60, OMAP_DMA_REG_32BIT },
 
 	/* Channel specific register offsets */
-	[CSSA]			= 0x9c,
-	[CDSA]			= 0xa0,
-	[CCEN]			= 0xbc,
-	[CCFN]			= 0xc0,
-	[COLOR]			= 0xc4,
+	[CSSA]		= { 0x009c, 0x60, OMAP_DMA_REG_32BIT },
+	[CDSA]		= { 0x00a0, 0x60, OMAP_DMA_REG_32BIT },
+	[CCEN]		= { 0x00bc, 0x60, OMAP_DMA_REG_32BIT },
+	[CCFN]		= { 0x00c0, 0x60, OMAP_DMA_REG_32BIT },
+	[COLOR]		= { 0x00c4, 0x60, OMAP_DMA_REG_32BIT },
 
 	/* OMAP4 specific registers */
-	[CDP]			= 0xd0,
-	[CNDP]			= 0xd4,
-	[CCDN]			= 0xd8,
+	[CDP]		= { 0x00d0, 0x60, OMAP_DMA_REG_32BIT },
+	[CNDP]		= { 0x00d4, 0x60, OMAP_DMA_REG_32BIT },
+	[CCDN]		= { 0x00d8, 0x60, OMAP_DMA_REG_32BIT },
 };
 
 static void __iomem *dma_base;
 static inline void dma_write(u32 val, int reg, int lch)
 {
-	u8  stride;
-	u32 offset;
+	void __iomem *addr = dma_base;
 
-	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
-	offset = reg_map[reg] + (stride * lch);
-	__raw_writel(val, dma_base + offset);
+	addr += reg_map[reg].offset;
+	addr += reg_map[reg].stride * lch;
+
+	writel_relaxed(val, addr);
 }
 
 static inline u32 dma_read(int reg, int lch)
 {
-	u8 stride;
-	u32 offset, val;
-
-	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
-	offset = reg_map[reg] + (stride * lch);
-	val = __raw_readl(dma_base + offset);
-	return val;
-}
+	void __iomem *addr = dma_base;
 
-static inline void omap2_disable_irq_lch(int lch)
-{
-	u32 val;
+	addr += reg_map[reg].offset;
+	addr += reg_map[reg].stride * lch;
 
-	val = dma_read(IRQENABLE_L0, lch);
-	val &= ~(1 << lch);
-	dma_write(val, IRQENABLE_L0, lch);
+	return readl_relaxed(addr);
 }
 
 static void omap2_clear_dma(int lch)
 {
-	int i = dma_common_ch_start;
+	int i;
 
-	for (; i <= dma_common_ch_end; i += 1)
+	for (i = CSDP; i <= dma_common_ch_end; i += 1)
 		dma_write(0, i, lch);
 }
 
@@ -137,8 +120,9 @@ static void omap2_show_dma_caps(void)
 	return;
 }
 
-static u32 configure_dma_errata(void)
+static unsigned configure_dma_errata(void)
 {
+	unsigned errata = 0;
 
 	/*
 	 * Errata applicable for OMAP2430ES1.0 and all omap2420
@@ -220,48 +204,50 @@ static u32 configure_dma_errata(void)
 	return errata;
 }
 
+static struct omap_system_dma_plat_info dma_plat_info __initdata = {
+	.reg_map	= reg_map,
+	.channel_stride	= 0x60,
+	.show_dma_caps	= omap2_show_dma_caps,
+	.clear_dma	= omap2_clear_dma,
+	.dma_write	= dma_write,
+	.dma_read	= dma_read,
+};
+
+static struct platform_device_info omap_dma_dev_info = {
+	.name = "omap-dma-engine",
+	.id = -1,
+	.dma_mask = DMA_BIT_MASK(32),
+};
+
 /* One time initializations */
 static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 {
 	struct platform_device			*pdev;
-	struct omap_system_dma_plat_info	*p;
+	struct omap_system_dma_plat_info	p;
+	struct omap_dma_dev_attr		*d;
 	struct resource				*mem;
 	char					*name = "omap_dma_system";
 
-	dma_stride		= OMAP2_DMA_STRIDE;
-	dma_common_ch_start	= CSDP;
-
-	p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
-	if (!p) {
-		pr_err("%s: Unable to allocate pdata for %s:%s\n",
-			__func__, name, oh->name);
-		return -ENOMEM;
-	}
-
-	p->dma_attr		= (struct omap_dma_dev_attr *)oh->dev_attr;
-	p->disable_irq_lch	= omap2_disable_irq_lch;
-	p->show_dma_caps	= omap2_show_dma_caps;
-	p->clear_dma		= omap2_clear_dma;
-	p->dma_write		= dma_write;
-	p->dma_read		= dma_read;
-
-	p->clear_lch_regs	= NULL;
-
-	p->errata		= configure_dma_errata();
+	p = dma_plat_info;
+	p.dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr;
+	p.errata = configure_dma_errata();
 
-	pdev = omap_device_build(name, 0, oh, p, sizeof(*p));
-	kfree(p);
+	pdev = omap_device_build(name, 0, oh, &p, sizeof(p));
 	if (IS_ERR(pdev)) {
 		pr_err("%s: Can't build omap_device for %s:%s.\n",
 			__func__, name, oh->name);
 		return PTR_ERR(pdev);
 	}
 
+	omap_dma_dev_info.res = pdev->resource;
+	omap_dma_dev_info.num_res = pdev->num_resources;
+
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem) {
 		dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
 		return -EINVAL;
 	}
+
 	dma_base = ioremap(mem->start, resource_size(mem));
 	if (!dma_base) {
 		dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
@@ -269,13 +255,6 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 	}
 
 	d = oh->dev_attr;
-	d->chan = kzalloc(sizeof(struct omap_dma_lch) *
-					(d->lch_count), GFP_KERNEL);
-
-	if (!d->chan) {
-		dev_err(&pdev->dev, "%s: kzalloc fail\n", __func__);
-		return -ENOMEM;
-	}
 
 	if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
 		d->dev_caps |= HS_CHANNELS_RESERVED;
@@ -289,12 +268,6 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 	return 0;
 }
 
-static const struct platform_device_info omap_dma_dev_info = {
-	.name = "omap-dma-engine",
-	.id = -1,
-	.dma_mask = DMA_BIT_MASK(32),
-};
-
 static int __init omap2_system_dma_init(void)
 {
 	struct platform_device *pdev;
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 3c418ea54bbe..fcd8036af910 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -525,7 +525,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 	* stuff is inherited for free
 	*/
 
-	if (!ret)
+	if (!ret && clk_get_parent(hw->clk) != new_parent)
 		__clk_reparent(hw->clk, new_parent);
 
 	return 0;
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index dadccc91488c..ea2be0f5953b 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -33,227 +33,5 @@
 #include "soc.h"
 #include "dss-common.h"
 #include "mux.h"
+#include "display.h"
 
-#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
-#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
-#define HDMI_GPIO_HPD  63 /* Hotplug detect */
-
-#define PANDA_DVI_TFP410_POWER_DOWN_GPIO	0
-
-/* DVI Connector */
-static struct connector_dvi_platform_data omap4_panda_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = 2,
-};
-
-static struct platform_device omap4_panda_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &omap4_panda_dvi_connector_pdata,
-};
-
-/* TFP410 DPI-to-DVI chip */
-static struct encoder_tfp410_platform_data omap4_panda_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
-};
-
-static struct platform_device omap4_panda_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &omap4_panda_tfp410_pdata,
-};
-
-/* HDMI Connector */
-static struct connector_hdmi_platform_data omap4_panda_hdmi_connector_pdata = {
-	.name                   = "hdmi",
-	.source                 = "tpd12s015.0",
-};
-
-static struct platform_device omap4_panda_hdmi_connector_device = {
-	.name                   = "connector-hdmi",
-	.id                     = 0,
-	.dev.platform_data      = &omap4_panda_hdmi_connector_pdata,
-};
-
-/* TPD12S015 HDMI ESD protection & level shifter chip */
-static struct encoder_tpd12s015_platform_data omap4_panda_tpd_pdata = {
-	.name                   = "tpd12s015.0",
-	.source                 = "hdmi.0",
-
-	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
-	.ls_oe_gpio = HDMI_GPIO_LS_OE,
-	.hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct platform_device omap4_panda_tpd_device = {
-	.name                   = "tpd12s015",
-	.id                     = 0,
-	.dev.platform_data      = &omap4_panda_tpd_pdata,
-};
-
-static struct omap_dss_board_info omap4_panda_dss_data = {
-	.default_display_name = "dvi",
-};
-
-void __init omap4_panda_display_init_of(void)
-{
-	omap_display_init(&omap4_panda_dss_data);
-
-	platform_device_register(&omap4_panda_tfp410_device);
-	platform_device_register(&omap4_panda_dvi_connector_device);
-
-	platform_device_register(&omap4_panda_tpd_device);
-	platform_device_register(&omap4_panda_hdmi_connector_device);
-}
-
-
-/* OMAP4 Blaze display data */
-
-#define DISPLAY_SEL_GPIO	59	/* LCD2/PicoDLP switch */
-#define DLP_POWER_ON_GPIO	40
-
-static struct panel_dsicm_platform_data dsi1_panel = {
-	.name		= "lcd",
-	.source		= "dsi.0",
-	.reset_gpio	= 102,
-	.use_ext_te	= false,
-	.ext_te_gpio	= 101,
-	.pin_config = {
-		.num_pins	= 6,
-		.pins		= { 0, 1, 2, 3, 4, 5 },
-	},
-};
-
-static struct platform_device sdp4430_lcd_device = {
-	.name                   = "panel-dsi-cm",
-	.id                     = 0,
-	.dev.platform_data	= &dsi1_panel,
-};
-
-static struct panel_dsicm_platform_data dsi2_panel = {
-	.name		= "lcd2",
-	.source		= "dsi.1",
-	.reset_gpio	= 104,
-	.use_ext_te	= false,
-	.ext_te_gpio	= 103,
-	.pin_config = {
-		.num_pins	= 6,
-		.pins		= { 0, 1, 2, 3, 4, 5 },
-	},
-};
-
-static struct platform_device sdp4430_lcd2_device = {
-	.name                   = "panel-dsi-cm",
-	.id                     = 1,
-	.dev.platform_data	= &dsi2_panel,
-};
-
-/* HDMI Connector */
-static struct connector_hdmi_platform_data sdp4430_hdmi_connector_pdata = {
-	.name                   = "hdmi",
-	.source                 = "tpd12s015.0",
-};
-
-static struct platform_device sdp4430_hdmi_connector_device = {
-	.name                   = "connector-hdmi",
-	.id                     = 0,
-	.dev.platform_data      = &sdp4430_hdmi_connector_pdata,
-};
-
-/* TPD12S015 HDMI ESD protection & level shifter chip */
-static struct encoder_tpd12s015_platform_data sdp4430_tpd_pdata = {
-	.name                   = "tpd12s015.0",
-	.source                 = "hdmi.0",
-
-	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
-	.ls_oe_gpio = HDMI_GPIO_LS_OE,
-	.hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct platform_device sdp4430_tpd_device = {
-	.name                   = "tpd12s015",
-	.id                     = 0,
-	.dev.platform_data      = &sdp4430_tpd_pdata,
-};
-
-
-static struct omap_dss_board_info sdp4430_dss_data = {
-	.default_display_name = "lcd",
-};
-
-/*
- * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO.
- * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails
- * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
- * selected by default
- */
-void __init omap_4430sdp_display_init_of(void)
-{
-	int r;
-
-	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
-			"display_sel");
-	if (r)
-		pr_err("%s: Could not get display_sel GPIO\n", __func__);
-
-	r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
-		"DLP POWER ON");
-	if (r)
-		pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
-
-	omap_display_init(&sdp4430_dss_data);
-
-	platform_device_register(&sdp4430_lcd_device);
-	platform_device_register(&sdp4430_lcd2_device);
-
-	platform_device_register(&sdp4430_tpd_device);
-	platform_device_register(&sdp4430_hdmi_connector_device);
-}
-
-
-/* OMAP3 IGEPv2 data */
-
-#define IGEP2_DVI_TFP410_POWER_DOWN_GPIO	170
-
-/* DVI Connector */
-static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = 2,
-};
-
-static struct platform_device omap3_igep2_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_igep2_dvi_connector_pdata,
-};
-
-/* TFP410 DPI-to-DVI chip */
-static struct encoder_tfp410_platform_data omap3_igep2_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = IGEP2_DVI_TFP410_POWER_DOWN_GPIO,
-};
-
-static struct platform_device omap3_igep2_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &omap3_igep2_tfp410_pdata,
-};
-
-static struct omap_dss_board_info igep2_dss_data = {
-	.default_display_name = "dvi",
-};
-
-void __init omap3_igep2_display_init_of(void)
-{
-	omap_display_init(&igep2_dss_data);
-
-	platform_device_register(&omap3_igep2_tfp410_device);
-	platform_device_register(&omap3_igep2_dvi_connector_device);
-}
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 174caecc3186..17cd39360afe 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -45,24 +45,31 @@ static struct platform_device gpmc_nand_device = {
 
 static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
 {
-	/* support only OMAP3 class */
-	if (!cpu_is_omap34xx() && !soc_is_am33xx()) {
-		pr_err("BCH ecc is not supported on this CPU\n");
+	/* platforms which support all ECC schemes */
+	if (soc_is_am33xx() || soc_is_am43xx() || cpu_is_omap44xx() ||
+		 soc_is_omap54xx() || soc_is_dra7xx())
+		return 1;
+
+	/* OMAP3xxx do not have ELM engine, so cannot support ECC schemes
+	 * which require H/W based ECC error detection */
+	if ((cpu_is_omap34xx() || cpu_is_omap3630()) &&
+	    ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
+		 (ecc_opt == OMAP_ECC_BCH8_CODE_HW)))
 		return 0;
-	}
 
 	/*
 	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1
 	 * and AM33xx derivates. Other chips may be added if confirmed to work.
 	 */
-	if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) &&
-	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)) &&
-	    (!soc_is_am33xx())) {
-		pr_err("BCH 4-bit mode is not supported on this CPU\n");
+	if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) &&
+	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)))
 		return 0;
-	}
 
-	return 1;
+	/* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
+	if (ecc_opt == OMAP_ECC_HAM1_CODE_HW)
+		return 1;
+	else
+		return 0;
 }
 
 /* This function will go away once the device-tree convertion is complete */
@@ -133,8 +140,10 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 
 	gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
 
-	if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt))
+	if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
+		dev_err(dev, "Unsupported NAND ECC scheme selected\n");
 		return -EINVAL;
+	}
 
 	err = platform_device_register(&gpmc_nand_device);
 	if (err < 0) {
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index ab43755364f5..852b19a367f0 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -170,12 +170,12 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev);
 
 static void gpmc_write_reg(int idx, u32 val)
 {
-	__raw_writel(val, gpmc_base + idx);
+	writel_relaxed(val, gpmc_base + idx);
 }
 
 static u32 gpmc_read_reg(int idx)
 {
-	return __raw_readl(gpmc_base + idx);
+	return readl_relaxed(gpmc_base + idx);
 }
 
 void gpmc_cs_write_reg(int cs, int idx, u32 val)
@@ -183,7 +183,7 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val)
 	void __iomem *reg_addr;
 
 	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-	__raw_writel(val, reg_addr);
+	writel_relaxed(val, reg_addr);
 }
 
 static u32 gpmc_cs_read_reg(int cs, int idx)
@@ -191,7 +191,7 @@ static u32 gpmc_cs_read_reg(int cs, int idx)
 	void __iomem *reg_addr;
 
 	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-	return __raw_readl(reg_addr);
+	return readl_relaxed(reg_addr);
 }
 
 /* TODO: Add support for gpmc_fck to clock framework and use it */
@@ -501,7 +501,7 @@ static int gpmc_cs_delete_mem(int cs)
 	int r;
 
 	spin_lock(&gpmc_mem_lock);
-	r = release_resource(&gpmc_cs_mem[cs]);
+	r = release_resource(res);
 	res->start = 0;
 	res->end = 0;
 	spin_unlock(&gpmc_mem_lock);
@@ -527,6 +527,14 @@ static int gpmc_cs_remap(int cs, u32 base)
 		pr_err("%s: requested chip-select is disabled\n", __func__);
 		return -ENODEV;
 	}
+
+	/*
+	 * Make sure we ignore any device offsets from the GPMC partition
+	 * allocated for the chip select and that the new base confirms
+	 * to the GPMC 16MB minimum granularity.
+	 */ 
+	base &= ~(SZ_16M - 1);
+
 	gpmc_cs_get_memconf(cs, &old_base, &size);
 	if (base == old_base)
 		return 0;
@@ -586,6 +594,8 @@ EXPORT_SYMBOL(gpmc_cs_request);
 
 void gpmc_cs_free(int cs)
 {
+	struct resource	*res = &gpmc_cs_mem[cs];
+
 	spin_lock(&gpmc_mem_lock);
 	if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) {
 		printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
@@ -594,7 +604,8 @@ void gpmc_cs_free(int cs)
 		return;
 	}
 	gpmc_cs_disable_mem(cs);
-	release_resource(&gpmc_cs_mem[cs]);
+	if (res->flags)
+		release_resource(res);
 	gpmc_cs_set_reserved(cs, 0);
 	spin_unlock(&gpmc_mem_lock);
 }
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index cbc8e3c480e0..f78b4a161959 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -76,6 +76,7 @@ int omap_hdq1w_reset(struct omap_hwmod *oh)
 	return 0;
 }
 
+#ifndef CONFIG_OF
 static int __init omap_init_hdq(void)
 {
 	int id = -1;
@@ -95,3 +96,4 @@ static int __init omap_init_hdq(void)
 	return 0;
 }
 omap_arch_initcall(omap_init_hdq);
+#endif
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 9428c5f9d4f2..43969da5d50b 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -94,7 +94,7 @@ EXPORT_SYMBOL(omap_type);
 #define OMAP_TAP_DIE_ID_44XX_2	0x020c
 #define OMAP_TAP_DIE_ID_44XX_3	0x0210
 
-#define read_tap_reg(reg)	__raw_readl(tap_base  + (reg))
+#define read_tap_reg(reg)	readl_relaxed(tap_base  + (reg))
 
 struct omap_id {
 	u16	hawkeye;	/* Silicon type (Hawkeye id) */
@@ -465,8 +465,18 @@ void __init omap3xxx_check_revision(void)
 		}
 		break;
 	case 0xb98c:
-		omap_revision = AM437X_REV_ES1_0;
-		cpu_rev = "1.0";
+		switch (rev) {
+		case 0:
+			omap_revision = AM437X_REV_ES1_0;
+			cpu_rev = "1.0";
+			break;
+		case 1:
+		/* FALLTHROUGH */
+		default:
+			omap_revision = AM437X_REV_ES1_1;
+			cpu_rev = "1.1";
+			break;
+		}
 		break;
 	case 0xb8f2:
 		switch (rev) {
@@ -618,6 +628,41 @@ void __init omap5xxx_check_revision(void)
 	pr_info("%s %s\n", soc_name, soc_rev);
 }
 
+void __init dra7xxx_check_revision(void)
+{
+	u32 idcode;
+	u16 hawkeye;
+	u8 rev;
+
+	idcode = read_tap_reg(OMAP_TAP_IDCODE);
+	hawkeye = (idcode >> 12) & 0xffff;
+	rev = (idcode >> 28) & 0xff;
+	switch (hawkeye) {
+	case 0xb990:
+		switch (rev) {
+		case 0:
+			omap_revision = DRA752_REV_ES1_0;
+			break;
+		case 1:
+		default:
+			omap_revision = DRA752_REV_ES1_1;
+		}
+		break;
+
+	default:
+		/* Unknown default to latest silicon rev as default*/
+		pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n",
+			__func__, idcode, hawkeye, rev);
+		omap_revision = DRA752_REV_ES1_1;
+	}
+
+	sprintf(soc_name, "DRA%03x", omap_rev() >> 16);
+	sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf,
+		(omap_rev() >> 8) & 0xf);
+
+	pr_info("%s %s\n", soc_name, soc_rev);
+}
+
 /*
  * Set up things for map_io and processor detection later on. Gets called
  * pretty much first thing from board init. For multi-omap, this gets
@@ -657,6 +702,10 @@ static const char * __init omap_get_family(void)
 		return kasprintf(GFP_KERNEL, "OMAP4");
 	else if (soc_is_omap54xx())
 		return kasprintf(GFP_KERNEL, "OMAP5");
+	else if (soc_is_am43xx())
+		return kasprintf(GFP_KERNEL, "AM43xx");
+	else if (soc_is_dra7xx())
+		return kasprintf(GFP_KERNEL, "DRA7");
 	else
 		return kasprintf(GFP_KERNEL, "Unknown");
 }
diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h
deleted file mode 100644
index de9f8fc40e7c..000000000000
--- a/arch/arm/mach-omap2/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/timex.h
- */
-
-#include <plat/timex.h>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index af432b191255..8f559450c876 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -604,10 +604,12 @@ void __init am43xx_init_early(void)
 	omap_prm_base_init();
 	omap_cm_base_init();
 	omap3xxx_check_revision();
+	am33xx_check_features();
 	am43xx_powerdomains_init();
 	am43xx_clockdomains_init();
 	am43xx_hwmod_init();
 	omap_hwmod_init_postsetup();
+	omap_l2_cache_init();
 	omap_clk_soc_init = am43xx_dt_clk_init;
 }
 
@@ -639,6 +641,7 @@ void __init omap4430_init_early(void)
 	omap44xx_clockdomains_init();
 	omap44xx_hwmod_init();
 	omap_hwmod_init_postsetup();
+	omap_l2_cache_init();
 	omap_clk_soc_init = omap4xxx_dt_clk_init;
 }
 
@@ -692,6 +695,7 @@ void __init dra7xx_init_early(void)
 	omap_prm_base_init();
 	omap_cm_base_init();
 	omap44xx_prm_init();
+	dra7xxx_check_revision();
 	dra7xx_powerdomains_init();
 	dra7xx_clockdomains_init();
 	dra7xx_hwmod_init();
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index e022a869bff2..35b8590c322e 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -83,12 +83,12 @@ struct omap3_intc_regs {
 
 static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
 {
-	__raw_writel(val, bank->base_reg + reg);
+	writel_relaxed(val, bank->base_reg + reg);
 }
 
 static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
 {
-	return __raw_readl(bank->base_reg + reg);
+	return readl_relaxed(bank->base_reg + reg);
 }
 
 /* XXX: FIQ and additional INTC support (only MPU at the moment) */
@@ -222,6 +222,7 @@ void __init ti81xx_init_irq(void)
 static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs)
 {
 	u32 irqnr;
+	int handled_irq = 0;
 
 	do {
 		irqnr = readl_relaxed(base_addr + 0x98);
@@ -249,8 +250,15 @@ out:
 		if (irqnr) {
 			irqnr = irq_find_mapping(domain, irqnr);
 			handle_IRQ(irqnr, regs);
+			handled_irq = 1;
 		}
 	} while (irqnr);
+
+	/* If an irq is masked or deasserted while active, we will
+	 * keep ending up here with no irq handled. So remove it from
+	 * the INTC with an ack.*/
+	if (!handled_irq)
+		omap_ack_irq(NULL);
 }
 
 asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 48094b58c88f..fd88edeb027f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -70,18 +70,18 @@ struct omap_mux_partition *omap_mux_get(const char *name)
 u16 omap_mux_read(struct omap_mux_partition *partition, u16 reg)
 {
 	if (partition->flags & OMAP_MUX_REG_8BIT)
-		return __raw_readb(partition->base + reg);
+		return readb_relaxed(partition->base + reg);
 	else
-		return __raw_readw(partition->base + reg);
+		return readw_relaxed(partition->base + reg);
 }
 
 void omap_mux_write(struct omap_mux_partition *partition, u16 val,
 			   u16 reg)
 {
 	if (partition->flags & OMAP_MUX_REG_8BIT)
-		__raw_writeb(val, partition->base + reg);
+		writeb_relaxed(val, partition->base + reg);
 	else
-		__raw_writew(val, partition->base + reg);
+		writew_relaxed(val, partition->base + reg);
 }
 
 void omap_mux_write_array(struct omap_mux_partition *partition,
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index a722330d4d53..d121fb6df4e6 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -63,9 +63,6 @@
 #define OMAP_PACKAGE_CUS		5		/* 423-pin 0.65 */
 #define OMAP_PACKAGE_CBB		4		/* 515-pin 0.40 0.50 */
 #define OMAP_PACKAGE_CBC		3		/* 515-pin 0.50 0.65 */
-#define OMAP_PACKAGE_ZAC		2		/* 24xx 447-pin POP */
-#define OMAP_PACKAGE_ZAF		1		/* 2420 447-pin SIP */
-
 
 #define OMAP_MUX_NR_MODES		8		/* Available modes */
 #define OMAP_MUX_NR_SIDES		2		/* Bottom & top */
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 75e92952c18e..4993d4bfe9b2 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -1,7 +1,7 @@
 /*
  * Secondary CPU startup routine source file.
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009-2014 Texas Instruments, Inc.
  *
  * Author:
  *      Santosh Shilimkar <santosh.shilimkar@ti.com>
@@ -28,7 +28,7 @@
  * code.  This routine also provides a holding flag into which
  * secondary core is held until we're ready for it to initialise.
  * The primary core will update this flag using a hardware
-+ * register AuxCoreBoot0.
+ * register AuxCoreBoot0.
  */
 ENTRY(omap5_secondary_startup)
 wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
@@ -39,7 +39,7 @@ wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	cmp	r0, r4
 	bne	wait
 	b	secondary_startup
-END(omap5_secondary_startup)
+ENDPROC(omap5_secondary_startup)
 /*
  * OMAP4 specific entry point for secondary CPU to jump from ROM
  * code.  This routine also provides a holding flag into which
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 458f72f9dc8f..971791fe9a3f 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -39,7 +39,7 @@ void __ref omap4_cpu_die(unsigned int cpu)
 		if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
 			pr_err("Secure clear status failed\n");
 	} else {
-		__raw_writel(0, base + OMAP_AUX_CORE_BOOT_0);
+		writel_relaxed(0, base + OMAP_AUX_CORE_BOOT_0);
 	}
 
 
@@ -53,7 +53,7 @@ void __ref omap4_cpu_die(unsigned int cpu)
 			boot_cpu = omap_read_auxcoreboot0();
 		else
 			boot_cpu =
-				__raw_readl(base + OMAP_AUX_CORE_BOOT_0) >> 5;
+				readl_relaxed(base + OMAP_AUX_CORE_BOOT_0) >> 5;
 
 		if (boot_cpu == smp_processor_id()) {
 			/*
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index f6daae821ebb..f1fab5684a24 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/of.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
@@ -58,6 +59,10 @@ static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused)
 
 static int __init omap_iommu_init(void)
 {
+	/* If dtb is there, the devices will be created dynamically */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
 	return omap_hwmod_for_each_by_class("mmu", omap_iommu_dev_init, NULL);
 }
 /* must be ready before omap3isp is probed */
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 667915d236f3..4001325f90fb 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -116,7 +116,7 @@ static inline void set_cpu_wakeup_addr(unsigned int cpu_id, u32 addr)
 {
 	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
 
-	__raw_writel(addr, pm_info->wkup_sar_addr);
+	writel_relaxed(addr, pm_info->wkup_sar_addr);
 }
 
 /*
@@ -141,7 +141,7 @@ static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state)
 		break;
 	}
 
-	__raw_writel(scu_pwr_st, pm_info->scu_sar_addr);
+	writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr);
 }
 
 /* Helper functions for MPUSS OSWR */
@@ -179,7 +179,7 @@ static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state)
 {
 	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
 
-	__raw_writel(save_state, pm_info->l2x0_sar_addr);
+	writel_relaxed(save_state, pm_info->l2x0_sar_addr);
 }
 
 /*
@@ -187,19 +187,15 @@ static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state)
  * in every restore MPUSS OFF path.
  */
 #ifdef CONFIG_CACHE_L2X0
-static void save_l2x0_context(void)
+static void __init save_l2x0_context(void)
 {
-	u32 val;
-	void __iomem *l2x0_base = omap4_get_l2cache_base();
-	if (l2x0_base) {
-		val = __raw_readl(l2x0_base + L2X0_AUX_CTRL);
-		__raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET);
-		val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL);
-		__raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET);
-	}
+	writel_relaxed(l2x0_saved_regs.aux_ctrl,
+		     sar_base + L2X0_AUXCTRL_OFFSET);
+	writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
+		     sar_base + L2X0_PREFETCH_CTRL_OFFSET);
 }
 #else
-static void save_l2x0_context(void)
+static void __init save_l2x0_context(void)
 {}
 #endif
 
@@ -386,9 +382,9 @@ int __init omap4_mpuss_init(void)
 
 	/* Save device type on scratchpad for low level code to use */
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
-		__raw_writel(1, sar_base + OMAP_TYPE_OFFSET);
+		writel_relaxed(1, sar_base + OMAP_TYPE_OFFSET);
 	else
-		__raw_writel(0, sar_base + OMAP_TYPE_OFFSET);
+		writel_relaxed(0, sar_base + OMAP_TYPE_OFFSET);
 
 	save_l2x0_context();
 
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 17550aa39d0f..256e84ef0f67 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -99,7 +99,7 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	if (omap_secure_apis_support())
 		omap_modify_auxcoreboot0(0x200, 0xfffffdff);
 	else
-		__raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
+		writel_relaxed(0x20, base + OMAP_AUX_CORE_BOOT_0);
 
 	if (!cpu1_clkdm && !cpu1_pwrdm) {
 		cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
@@ -227,8 +227,8 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 	if (omap_secure_apis_support())
 		omap_auxcoreboot_addr(virt_to_phys(startup_addr));
 	else
-		__raw_writel(virt_to_phys(omap5_secondary_startup),
-						base + OMAP_AUX_CORE_BOOT_1);
+		writel_relaxed(virt_to_phys(omap5_secondary_startup),
+			       base + OMAP_AUX_CORE_BOOT_1);
 
 }
 
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 3664562f9148..37843a7d3639 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -60,19 +60,19 @@ static unsigned int omap_secure_apis;
  */
 static inline u32 wakeupgen_readl(u8 idx, u32 cpu)
 {
-	return __raw_readl(wakeupgen_base + OMAP_WKG_ENB_A_0 +
+	return readl_relaxed(wakeupgen_base + OMAP_WKG_ENB_A_0 +
 				(cpu * CPU_ENA_OFFSET) + (idx * 4));
 }
 
 static inline void wakeupgen_writel(u32 val, u8 idx, u32 cpu)
 {
-	__raw_writel(val, wakeupgen_base + OMAP_WKG_ENB_A_0 +
+	writel_relaxed(val, wakeupgen_base + OMAP_WKG_ENB_A_0 +
 				(cpu * CPU_ENA_OFFSET) + (idx * 4));
 }
 
 static inline void sar_writel(u32 val, u32 offset, u8 idx)
 {
-	__raw_writel(val, sar_base + offset + (idx * 4));
+	writel_relaxed(val, sar_base + offset + (idx * 4));
 }
 
 static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index)
@@ -138,7 +138,7 @@ static void wakeupgen_mask(struct irq_data *d)
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&wakeupgen_lock, flags);
-	_wakeupgen_clear(d->irq, irq_target_cpu[d->irq]);
+	_wakeupgen_clear(d->hwirq, irq_target_cpu[d->hwirq]);
 	raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
 }
 
@@ -150,7 +150,7 @@ static void wakeupgen_unmask(struct irq_data *d)
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&wakeupgen_lock, flags);
-	_wakeupgen_set(d->irq, irq_target_cpu[d->irq]);
+	_wakeupgen_set(d->hwirq, irq_target_cpu[d->hwirq]);
 	raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
 }
 
@@ -231,21 +231,21 @@ static inline void omap4_irq_save_context(void)
 	}
 
 	/* Save AuxBoot* registers */
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
-	__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_1);
-	__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
+	val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+	writel_relaxed(val, sar_base + AUXCOREBOOT0_OFFSET);
+	val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_1);
+	writel_relaxed(val, sar_base + AUXCOREBOOT1_OFFSET);
 
 	/* Save SyncReq generation logic */
-	val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_MASK);
-	__raw_writel(val, sar_base + PTMSYNCREQ_MASK_OFFSET);
-	val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_EN);
-	__raw_writel(val, sar_base + PTMSYNCREQ_EN_OFFSET);
+	val = readl_relaxed(wakeupgen_base + OMAP_PTMSYNCREQ_MASK);
+	writel_relaxed(val, sar_base + PTMSYNCREQ_MASK_OFFSET);
+	val = readl_relaxed(wakeupgen_base + OMAP_PTMSYNCREQ_EN);
+	writel_relaxed(val, sar_base + PTMSYNCREQ_EN_OFFSET);
 
 	/* Set the Backup Bit Mask status */
-	val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
+	val = readl_relaxed(sar_base + SAR_BACKUP_STATUS_OFFSET);
 	val |= SAR_BACKUP_STATUS_WAKEUPGEN;
-	__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+	writel_relaxed(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
 
 }
 
@@ -264,15 +264,15 @@ static inline void omap5_irq_save_context(void)
 	}
 
 	/* Save AuxBoot* registers */
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
-	__raw_writel(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET);
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
-	__raw_writel(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET);
+	val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+	writel_relaxed(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET);
+	val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+	writel_relaxed(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET);
 
 	/* Set the Backup Bit Mask status */
-	val = __raw_readl(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
+	val = readl_relaxed(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
 	val |= SAR_BACKUP_STATUS_WAKEUPGEN;
-	__raw_writel(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
+	writel_relaxed(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
 
 }
 
@@ -306,9 +306,9 @@ static void irq_sar_clear(void)
 	if (soc_is_omap54xx())
 		offset = OMAP5_SAR_BACKUP_STATUS_OFFSET;
 
-	val = __raw_readl(sar_base + offset);
+	val = readl_relaxed(sar_base + offset);
 	val &= ~SAR_BACKUP_STATUS_WAKEUPGEN;
-	__raw_writel(val, sar_base + offset);
+	writel_relaxed(val, sar_base + offset);
 }
 
 /*
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 6cd3f3772ecf..326cd982a3cb 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -22,6 +22,7 @@
 #include <linux/of_platform.h>
 #include <linux/export.h>
 #include <linux/irqchip/arm-gic.h>
+#include <linux/irqchip/irq-crossbar.h>
 #include <linux/of_address.h>
 #include <linux/reboot.h>
 
@@ -124,25 +125,25 @@ void __init gic_init_irq(void)
 void gic_dist_disable(void)
 {
 	if (gic_dist_base_addr)
-		__raw_writel(0x0, gic_dist_base_addr + GIC_DIST_CTRL);
+		writel_relaxed(0x0, gic_dist_base_addr + GIC_DIST_CTRL);
 }
 
 void gic_dist_enable(void)
 {
 	if (gic_dist_base_addr)
-		__raw_writel(0x1, gic_dist_base_addr + GIC_DIST_CTRL);
+		writel_relaxed(0x1, gic_dist_base_addr + GIC_DIST_CTRL);
 }
 
 bool gic_dist_disabled(void)
 {
-	return !(__raw_readl(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1);
+	return !(readl_relaxed(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1);
 }
 
 void gic_timer_retrigger(void)
 {
-	u32 twd_int = __raw_readl(twd_base + TWD_TIMER_INTSTAT);
-	u32 gic_int = __raw_readl(gic_dist_base_addr + GIC_DIST_PENDING_SET);
-	u32 twd_ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
+	u32 twd_int = readl_relaxed(twd_base + TWD_TIMER_INTSTAT);
+	u32 gic_int = readl_relaxed(gic_dist_base_addr + GIC_DIST_PENDING_SET);
+	u32 twd_ctrl = readl_relaxed(twd_base + TWD_TIMER_CONTROL);
 
 	if (twd_int && !(gic_int & BIT(IRQ_LOCALTIMER))) {
 		/*
@@ -150,11 +151,11 @@ void gic_timer_retrigger(void)
 		 * disabled.  Ack the pending interrupt, and retrigger it.
 		 */
 		pr_warn("%s: lost localtimer interrupt\n", __func__);
-		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
+		writel_relaxed(1, twd_base + TWD_TIMER_INTSTAT);
 		if (!(twd_ctrl & TWD_TIMER_CONTROL_PERIODIC)) {
-			__raw_writel(1, twd_base + TWD_TIMER_COUNTER);
+			writel_relaxed(1, twd_base + TWD_TIMER_COUNTER);
 			twd_ctrl |= TWD_TIMER_CONTROL_ENABLE;
-			__raw_writel(twd_ctrl, twd_base + TWD_TIMER_CONTROL);
+			writel_relaxed(twd_ctrl, twd_base + TWD_TIMER_CONTROL);
 		}
 	}
 }
@@ -166,75 +167,57 @@ void __iomem *omap4_get_l2cache_base(void)
 	return l2cache_base;
 }
 
-static void omap4_l2x0_disable(void)
+static void omap4_l2c310_write_sec(unsigned long val, unsigned reg)
 {
-	outer_flush_all();
-	/* Disable PL310 L2 Cache controller */
-	omap_smc1(0x102, 0x0);
-}
+	unsigned smc_op;
 
-static void omap4_l2x0_set_debug(unsigned long val)
-{
-	/* Program PL310 L2 Cache controller debug register */
-	omap_smc1(0x100, val);
+	switch (reg) {
+	case L2X0_CTRL:
+		smc_op = OMAP4_MON_L2X0_CTRL_INDEX;
+		break;
+
+	case L2X0_AUX_CTRL:
+		smc_op = OMAP4_MON_L2X0_AUXCTRL_INDEX;
+		break;
+
+	case L2X0_DEBUG_CTRL:
+		smc_op = OMAP4_MON_L2X0_DBG_CTRL_INDEX;
+		break;
+
+	case L310_PREFETCH_CTRL:
+		smc_op = OMAP4_MON_L2X0_PREFETCH_INDEX;
+		break;
+
+	default:
+		WARN_ONCE(1, "OMAP L2C310: ignoring write to reg 0x%x\n", reg);
+		return;
+	}
+
+	omap_smc1(smc_op, val);
 }
 
-static int __init omap_l2_cache_init(void)
+int __init omap_l2_cache_init(void)
 {
-	u32 aux_ctrl = 0;
-
-	/*
-	 * To avoid code running on other OMAPs in
-	 * multi-omap builds
-	 */
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
+	u32 aux_ctrl;
 
 	/* Static mapping, never released */
 	l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
 	if (WARN_ON(!l2cache_base))
 		return -ENOMEM;
 
-	/*
-	 * 16-way associativity, parity disabled
-	 * Way size - 32KB (es1.0)
-	 * Way size - 64KB (es2.0 +)
-	 */
-	aux_ctrl = ((1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT) |
-			(0x1 << 25) |
-			(0x1 << L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT) |
-			(0x1 << L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT));
-
-	if (omap_rev() == OMAP4430_REV_ES1_0) {
-		aux_ctrl |= 0x2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT;
-	} else {
-		aux_ctrl |= ((0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) |
-			(1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) |
-			(1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) |
-			(1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
-			(1 << L2X0_AUX_CTRL_EARLY_BRESP_SHIFT));
-	}
-	if (omap_rev() != OMAP4430_REV_ES1_0)
-		omap_smc1(0x109, aux_ctrl);
-
-	/* Enable PL310 L2 Cache controller */
-	omap_smc1(0x102, 0x1);
+	/* 16-way associativity, parity disabled, way size - 64KB (es2.0 +) */
+	aux_ctrl = L2C_AUX_CTRL_SHARED_OVERRIDE |
+		   L310_AUX_CTRL_DATA_PREFETCH |
+		   L310_AUX_CTRL_INSTR_PREFETCH;
 
+	outer_cache.write_sec = omap4_l2c310_write_sec;
 	if (of_have_populated_dt())
-		l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
+		l2x0_of_init(aux_ctrl, 0xcf9fffff);
 	else
-		l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
-
-	/*
-	 * Override default outer_cache.disable with a OMAP4
-	 * specific one
-	*/
-	outer_cache.disable = omap4_l2x0_disable;
-	outer_cache.set_debug = omap4_l2x0_set_debug;
+		l2x0_init(l2cache_base, aux_ctrl, 0xcf9fffff);
 
 	return 0;
 }
-omap_early_initcall(omap_l2_cache_init);
 #endif
 
 void __iomem *omap4_get_sar_ram_base(void)
@@ -288,5 +271,8 @@ void __init omap_gic_of_init(void)
 
 skip_errata_init:
 	omap_wakeupgen_init();
+#ifdef CONFIG_IRQ_CROSSBAR
+	irqcrossbar_init();
+#endif
 	irqchip_init();
 }
diff --git a/arch/arm/mach-omap2/omap4-keypad.h b/arch/arm/mach-omap2/omap4-keypad.h
deleted file mode 100644
index 20de0d5a7e77..000000000000
--- a/arch/arm/mach-omap2/omap4-keypad.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
-#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
-
-struct omap_board_data;
-
-extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
-				struct omap_board_data *);
-#endif
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 1f33f5db10d5..f7bb435bb543 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -72,7 +72,7 @@
  *            | (../mach-omap2/omap_hwmod*)   |
  *            +-------------------------------+
  *            | OMAP clock/PRCM/register fns  |
- *            | (__raw_{read,write}l, clk*)   |
+ *            | ({read,write}l_relaxed, clk*) |
  *            +-------------------------------+
  *
  * Device drivers should not contain any OMAP-specific code or data in
@@ -2546,11 +2546,12 @@ static int __init _init(struct omap_hwmod *oh, void *data)
 		return -EINVAL;
 	}
 
-	if (np)
+	if (np) {
 		if (of_find_property(np, "ti,no-reset-on-init", NULL))
 			oh->flags |= HWMOD_INIT_NO_RESET;
 		if (of_find_property(np, "ti,no-idle-on-init", NULL))
 			oh->flags |= HWMOD_INIT_NO_IDLE;
+	}
 
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 
@@ -3229,17 +3230,17 @@ static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh,
 u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
 {
 	if (oh->flags & HWMOD_16BIT_REG)
-		return __raw_readw(oh->_mpu_rt_va + reg_offs);
+		return readw_relaxed(oh->_mpu_rt_va + reg_offs);
 	else
-		return __raw_readl(oh->_mpu_rt_va + reg_offs);
+		return readl_relaxed(oh->_mpu_rt_va + reg_offs);
 }
 
 void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
 {
 	if (oh->flags & HWMOD_16BIT_REG)
-		__raw_writew(v, oh->_mpu_rt_va + reg_offs);
+		writew_relaxed(v, oh->_mpu_rt_va + reg_offs);
 	else
-		__raw_writel(v, oh->_mpu_rt_va + reg_offs);
+		writel_relaxed(v, oh->_mpu_rt_va + reg_offs);
 }
 
 /**
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 0f178623e7da..a579b89ce9b7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -24,6 +24,7 @@
 #include "prm33xx.h"
 #include "omap_hwmod_33xx_43xx_common_data.h"
 #include "prcm43xx.h"
+#include "common.h"
 
 #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl))
 #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl))
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 4c3b1e6df508..1cd0cfdc03e0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1955,10 +1955,6 @@ static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
 	.sysc = &omap3xxx_usb_host_hs_sysc,
 };
 
-static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
-	  { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", },
-};
-
 static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
 	{ .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, },
 	{ .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, },
@@ -1968,7 +1964,7 @@ static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
 static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
 	.name		= "usb_host_hs",
 	.class		= &omap3xxx_usb_host_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
+	.clkdm_name	= "usbhost_clkdm",
 	.mpu_irqs	= omap3xxx_usb_host_hs_irqs,
 	.main_clk	= "usbhost_48m_fck",
 	.prcm = {
@@ -1981,8 +1977,6 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
 			.idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT,
 		},
 	},
-	.opt_clks	= omap3xxx_usb_host_hs_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks),
 
 	/*
 	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
@@ -2053,7 +2047,7 @@ static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
 static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
 	.name		= "usb_tll_hs",
 	.class		= &omap3xxx_usb_tll_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
+	.clkdm_name	= "core_l4_clkdm",
 	.mpu_irqs	= omap3xxx_usb_tll_hs_irqs,
 	.main_clk	= "usbtll_fck",
 	.prcm = {
@@ -3029,8 +3023,6 @@ static struct omap_hwmod omap3xxx_mmu_isp_hwmod = {
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-#ifdef CONFIG_OMAP_IOMMU_IVA2
-
 /* mmu iva */
 
 static struct omap_mmu_dev_attr mmu_iva_dev_attr = {
@@ -3070,20 +3062,22 @@ static struct omap_hwmod omap3xxx_mmu_iva_hwmod = {
 	.name		= "mmu_iva",
 	.class		= &omap3xxx_mmu_hwmod_class,
 	.mpu_irqs	= omap3xxx_mmu_iva_irqs,
+	.clkdm_name	= "iva2_clkdm",
 	.rst_lines	= omap3xxx_mmu_iva_resets,
 	.rst_lines_cnt	= ARRAY_SIZE(omap3xxx_mmu_iva_resets),
 	.main_clk	= "iva2_ck",
 	.prcm = {
 		.omap2 = {
 			.module_offs = OMAP3430_IVA2_MOD,
+			.module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
 		},
 	},
 	.dev_attr	= &mmu_iva_dev_attr,
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-#endif
-
 /* l4_per -> gpio4 */
 static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
 	{
@@ -3695,12 +3689,9 @@ static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE |
-			   SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -3855,9 +3846,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__hdq1w,
 	&omap3xxx_sad2d__l3,
 	&omap3xxx_l4_core__mmu_isp,
-#ifdef CONFIG_OMAP_IOMMU_IVA2
 	&omap3xxx_l3_main__mmu_iva,
-#endif
 	&omap34xx_l4_core__ssi,
 	NULL
 };
@@ -3881,9 +3870,7 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__hdq1w,
 	&omap3xxx_sad2d__l3,
 	&omap3xxx_l4_core__mmu_isp,
-#ifdef CONFIG_OMAP_IOMMU_IVA2
 	&omap3xxx_l3_main__mmu_iva,
-#endif
 	NULL
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 9002fca76699..5c2cc8083fdd 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -719,6 +719,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l4_ls__uart4,
 	&am33xx_l4_ls__uart5,
 	&am33xx_l4_ls__uart6,
+	&am33xx_l4_ls__spinlock,
 	&am33xx_l4_ls__elm,
 	&am33xx_l4_ls__epwmss0,
 	&am33xx_epwmss0__ecap0,
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 3318cae96e7d..41e54f759934 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2541,8 +2541,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_spinlock_sysc = {
 	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
 			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
 			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -3636,15 +3635,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_dmic_hwmod,
 	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> dmic (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_dmic_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_SDMA,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* dsp -> iva */
@@ -4210,15 +4201,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_mcbsp1_hwmod,
 	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> mcbsp1 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp1_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_SDMA,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_abe -> mcbsp2 */
@@ -4226,15 +4209,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_mcbsp2_hwmod,
 	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> mcbsp2 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp2_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_SDMA,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_abe -> mcbsp3 */
@@ -4242,15 +4217,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_mcbsp3_hwmod,
 	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> mcbsp3 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp3_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_SDMA,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_per -> mcbsp4 */
@@ -4266,15 +4233,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_mcpdm_hwmod,
 	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> mcpdm (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcpdm_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_SDMA,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_per -> mcspi1 */
@@ -4576,15 +4535,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_timer5_hwmod,
 	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> timer5 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer5_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_SDMA,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_abe -> timer6 */
@@ -4592,15 +4543,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_timer6_hwmod,
 	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> timer6 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer6_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_SDMA,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_abe -> timer7 */
@@ -4608,15 +4551,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_timer7_hwmod,
 	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> timer7 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer7_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_SDMA,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_abe -> timer8 */
@@ -4624,15 +4559,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_timer8_hwmod,
 	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> timer8 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer8_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_SDMA,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_per -> timer9 */
@@ -4832,7 +4759,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l3_instr__debugss,
 	&omap44xx_l4_cfg__dma_system,
 	&omap44xx_l4_abe__dmic,
-	&omap44xx_l4_abe__dmic_dma,
 	&omap44xx_dsp__iva,
 	/* &omap44xx_dsp__sl2if, */
 	&omap44xx_l4_cfg__dsp,
@@ -4875,14 +4801,10 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_abe__mcasp,
 	&omap44xx_l4_abe__mcasp_dma,
 	&omap44xx_l4_abe__mcbsp1,
-	&omap44xx_l4_abe__mcbsp1_dma,
 	&omap44xx_l4_abe__mcbsp2,
-	&omap44xx_l4_abe__mcbsp2_dma,
 	&omap44xx_l4_abe__mcbsp3,
-	&omap44xx_l4_abe__mcbsp3_dma,
 	&omap44xx_l4_per__mcbsp4,
 	&omap44xx_l4_abe__mcpdm,
-	&omap44xx_l4_abe__mcpdm_dma,
 	&omap44xx_l4_per__mcspi1,
 	&omap44xx_l4_per__mcspi2,
 	&omap44xx_l4_per__mcspi3,
@@ -4914,13 +4836,9 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_per__timer3,
 	&omap44xx_l4_per__timer4,
 	&omap44xx_l4_abe__timer5,
-	&omap44xx_l4_abe__timer5_dma,
 	&omap44xx_l4_abe__timer6,
-	&omap44xx_l4_abe__timer6_dma,
 	&omap44xx_l4_abe__timer7,
-	&omap44xx_l4_abe__timer7_dma,
 	&omap44xx_l4_abe__timer8,
-	&omap44xx_l4_abe__timer8_dma,
 	&omap44xx_l4_per__timer9,
 	&omap44xx_l4_per__timer10,
 	&omap44xx_l4_per__timer11,
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index e297d6231c3a..290213f2cbe3 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -334,6 +334,235 @@ static struct omap_hwmod omap54xx_dmic_hwmod = {
 };
 
 /*
+ * 'dss' class
+ * display sub-system
+ */
+static struct omap_hwmod_class_sysconfig omap54xx_dss_sysc = {
+	.rev_offs	= 0x0000,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class omap54xx_dss_hwmod_class = {
+	.name	= "dss",
+	.sysc	= &omap54xx_dss_sysc,
+	.reset	= omap_dss_reset,
+};
+
+/* dss */
+static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+	{ .role = "32khz_clk", .clk = "dss_32khz_clk" },
+	{ .role = "sys_clk", .clk = "dss_sys_clk" },
+	{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_hwmod = {
+	.name		= "dss_core",
+	.class		= &omap54xx_dss_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "dss_dss_clk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_DSS_DSS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= dss_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_opt_clks),
+};
+
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_dispc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_dispc_hwmod_class = {
+	.name	= "dispc",
+	.sysc	= &omap54xx_dispc_sysc,
+};
+
+/* dss_dispc */
+static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
+	{ .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+/* dss_dispc dev_attr */
+static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = {
+	.has_framedonetv_irq	= 1,
+	.manager_count		= 4,
+};
+
+static struct omap_hwmod omap54xx_dss_dispc_hwmod = {
+	.name		= "dss_dispc",
+	.class		= &omap54xx_dispc_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.main_clk	= "dss_dss_clk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+	.opt_clks	= dss_dispc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_dispc_opt_clks),
+	.dev_attr	= &dss_dispc_dev_attr,
+};
+
+/*
+ * 'dsi1' class
+ * display serial interface controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_dsi1_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_dsi1_hwmod_class = {
+	.name	= "dsi1",
+	.sysc	= &omap54xx_dsi1_sysc,
+};
+
+/* dss_dsi1_a */
+static struct omap_hwmod_opt_clk dss_dsi1_a_opt_clks[] = {
+	{ .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_dsi1_a_hwmod = {
+	.name		= "dss_dsi1",
+	.class		= &omap54xx_dsi1_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.main_clk	= "dss_dss_clk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+	.opt_clks	= dss_dsi1_a_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_a_opt_clks),
+};
+
+/* dss_dsi1_c */
+static struct omap_hwmod_opt_clk dss_dsi1_c_opt_clks[] = {
+	{ .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_dsi1_c_hwmod = {
+	.name		= "dss_dsi2",
+	.class		= &omap54xx_dsi1_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.main_clk	= "dss_dss_clk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+	.opt_clks	= dss_dsi1_c_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_c_opt_clks),
+};
+
+/*
+ * 'hdmi' class
+ * hdmi controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_hdmi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap54xx_hdmi_hwmod_class = {
+	.name	= "hdmi",
+	.sysc	= &omap54xx_hdmi_sysc,
+};
+
+static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
+	{ .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_hdmi_hwmod = {
+	.name		= "dss_hdmi",
+	.class		= &omap54xx_hdmi_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.main_clk	= "dss_48mhz_clk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+	.opt_clks	= dss_hdmi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_hdmi_opt_clks),
+};
+
+/*
+ * 'rfbi' class
+ * remote frame buffer interface
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_rfbi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_rfbi_hwmod_class = {
+	.name	= "rfbi",
+	.sysc	= &omap54xx_rfbi_sysc,
+};
+
+/* dss_rfbi */
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "l3_iclk_div" },
+};
+
+static struct omap_hwmod omap54xx_dss_rfbi_hwmod = {
+	.name		= "dss_rfbi",
+	.class		= &omap54xx_rfbi_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
+};
+
+/*
  * 'emif' class
  * external memory interface no1 (wrapper)
  */
@@ -895,7 +1124,7 @@ static struct omap_hwmod omap54xx_mcpdm_hwmod = {
 	 * current exception.
 	 */
 
-	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
+	.flags		= HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
 	.main_clk	= "pad_clks_ck",
 	.prcm = {
 		.omap4 = {
@@ -1122,6 +1351,71 @@ static struct omap_hwmod omap54xx_mmc5_hwmod = {
 };
 
 /*
+ * 'mmu' class
+ * The memory management unit performs virtual to physical address translation
+ * for its requestors.
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_mmu_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_mmu_hwmod_class = {
+	.name = "mmu",
+	.sysc = &omap54xx_mmu_sysc,
+};
+
+static struct omap_hwmod_rst_info omap54xx_mmu_dsp_resets[] = {
+	{ .name = "mmu_cache", .rst_shift = 1 },
+};
+
+static struct omap_hwmod omap54xx_mmu_dsp_hwmod = {
+	.name		= "mmu_dsp",
+	.class		= &omap54xx_mmu_hwmod_class,
+	.clkdm_name	= "dsp_clkdm",
+	.rst_lines	= omap54xx_mmu_dsp_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap54xx_mmu_dsp_resets),
+	.main_clk	= "dpll_iva_h11x2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_DSP_DSP_CLKCTRL_OFFSET,
+			.rstctrl_offs = OMAP54XX_RM_DSP_RSTCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_DSP_DSP_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/* mmu ipu */
+static struct omap_hwmod_rst_info omap54xx_mmu_ipu_resets[] = {
+	{ .name = "mmu_cache", .rst_shift = 2 },
+};
+
+static struct omap_hwmod omap54xx_mmu_ipu_hwmod = {
+	.name		= "mmu_ipu",
+	.class		= &omap54xx_mmu_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.rst_lines	= omap54xx_mmu_ipu_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap54xx_mmu_ipu_resets),
+	.main_clk	= "dpll_core_h22x2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_IPU_IPU_CLKCTRL_OFFSET,
+			.rstctrl_offs = OMAP54XX_RM_IPU_RSTCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_IPU_IPU_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
  * 'mpu' class
  * mpu sub-system
  */
@@ -1763,6 +2057,14 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_1 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_cfg -> mmu_dsp */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mmu_dsp = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_mmu_dsp_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* mpu -> l3_main_1 */
 static struct omap_hwmod_ocp_if omap54xx_mpu__l3_main_1 = {
 	.master		= &omap54xx_mpu_hwmod,
@@ -1787,6 +2089,14 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l3_main_2 -> mmu_ipu */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__mmu_ipu = {
+	.master		= &omap54xx_l3_main_2_hwmod,
+	.slave		= &omap54xx_mmu_ipu_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l3_main_1 -> l3_main_3 */
 static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_3 = {
 	.master		= &omap54xx_l3_main_1_hwmod,
@@ -1893,6 +2203,54 @@ static struct omap_hwmod_ocp_if omap54xx_l4_abe__dmic = {
 	.user		= OCP_USER_MPU,
 };
 
+/* l3_main_2 -> dss */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss = {
+	.master		= &omap54xx_l3_main_2_hwmod,
+	.slave		= &omap54xx_dss_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_dispc */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dispc = {
+	.master		= &omap54xx_l3_main_2_hwmod,
+	.slave		= &omap54xx_dss_dispc_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_dsi1_a */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_a = {
+	.master		= &omap54xx_l3_main_2_hwmod,
+	.slave		= &omap54xx_dss_dsi1_a_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_dsi1_c */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_c = {
+	.master		= &omap54xx_l3_main_2_hwmod,
+	.slave		= &omap54xx_dss_dsi1_c_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_hdmi */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_hdmi = {
+	.master		= &omap54xx_l3_main_2_hwmod,
+	.slave		= &omap54xx_dss_hdmi_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_rfbi */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_rfbi = {
+	.master		= &omap54xx_l3_main_2_hwmod,
+	.slave		= &omap54xx_dss_rfbi_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* mpu -> emif1 */
 static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = {
 	.master		= &omap54xx_mpu_hwmod,
@@ -2345,6 +2703,13 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_wkup__counter_32k,
 	&omap54xx_l4_cfg__dma_system,
 	&omap54xx_l4_abe__dmic,
+	&omap54xx_l4_cfg__mmu_dsp,
+	&omap54xx_l3_main_2__dss,
+	&omap54xx_l3_main_2__dss_dispc,
+	&omap54xx_l3_main_2__dss_dsi1_a,
+	&omap54xx_l3_main_2__dss_dsi1_c,
+	&omap54xx_l3_main_2__dss_hdmi,
+	&omap54xx_l3_main_2__dss_rfbi,
 	&omap54xx_mpu__emif1,
 	&omap54xx_mpu__emif2,
 	&omap54xx_l4_wkup__gpio1,
@@ -2360,6 +2725,7 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_per__i2c3,
 	&omap54xx_l4_per__i2c4,
 	&omap54xx_l4_per__i2c5,
+	&omap54xx_l3_main_2__mmu_ipu,
 	&omap54xx_l4_wkup__kbd,
 	&omap54xx_l4_cfg__mailbox,
 	&omap54xx_l4_abe__mcbsp1,
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 810c205d668b..20b4398cec05 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -2318,21 +2318,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_ocp2scp1_addrs[] = {
-	{
-		.pa_start	= 0x4a080000,
-		.pa_end		= 0x4a08001f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l4_cfg -> ocp2scp1 */
 static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = {
 	.master		= &dra7xx_l4_cfg_hwmod,
 	.slave		= &dra7xx_ocp2scp1_hwmod,
 	.clk		= "l4_root_clk_div",
-	.addr		= dra7xx_ocp2scp1_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index eb8a25de67ed..50640b38f0bf 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -57,7 +57,7 @@ static int __init omap4430_phy_power_down(void)
 	}
 
 	/* Power down the phy */
-	__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+	writel_relaxed(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
 
 	iounmap(ctrl_base);
 
@@ -162,7 +162,7 @@ void ti81xx_musb_phy_power(u8 on)
 		return;
 	}
 
-	usbphycfg = __raw_readl(scm_base + USBCTRL0);
+	usbphycfg = readl_relaxed(scm_base + USBCTRL0);
 
 	if (on) {
 		if (cpu_is_ti816x()) {
@@ -181,7 +181,7 @@ void ti81xx_musb_phy_power(u8 on)
 			usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
 
 	}
-	__raw_writel(usbphycfg, scm_base + USBCTRL0);
+	writel_relaxed(usbphycfg, scm_base + USBCTRL0);
 
 	iounmap(scm_base);
 }
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 615e5b1fb025..6bf626700557 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -46,15 +46,8 @@
 
 static bool is_offset_valid;
 static u8 smps_offset;
-/*
- * Flag to ensure Smartreflex bit in TWL
- * being cleared in board file is not overwritten.
- */
-static bool __initdata twl_sr_enable_autoinit;
 
-#define TWL4030_DCDC_GLOBAL_CFG        0x06
 #define REG_SMPS_OFFSET         0xE0
-#define SMARTREFLEX_ENABLE     BIT(3)
 
 static unsigned long twl4030_vsel_to_uv(const u8 vsel)
 {
@@ -251,18 +244,6 @@ int __init omap3_twl_init(void)
 	if (!cpu_is_omap34xx())
 		return -ENODEV;
 
-	/*
-	 * The smartreflex bit on twl4030 specifies if the setting of voltage
-	 * is done over the I2C_SR path. Since this setting is independent of
-	 * the actual usage of smartreflex AVS module, we enable TWL SR bit
-	 * by default irrespective of whether smartreflex AVS module is enabled
-	 * on the OMAP side or not. This is because without this bit enabled,
-	 * the voltage scaling through vp forceupdate/bypass mechanism of
-	 * voltage scaling will not function on TWL over I2C_SR.
-	 */
-	if (!twl_sr_enable_autoinit)
-		omap3_twl_set_sr_bit(true);
-
 	voltdm = voltdm_lookup("mpu_iva");
 	omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
 
@@ -271,44 +252,3 @@ int __init omap3_twl_init(void)
 
 	return 0;
 }
-
-/**
- * omap3_twl_set_sr_bit() - Set/Clear SR bit on TWL
- * @enable: enable SR mode in twl or not
- *
- * If 'enable' is true, enables Smartreflex bit on TWL 4030 to make sure
- * voltage scaling through OMAP SR works. Else, the smartreflex bit
- * on twl4030 is cleared as there are platforms which use OMAP3 and T2 but
- * use Synchronized Scaling Hardware Strategy (ENABLE_VMODE=1) and Direct
- * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages,
- * in those scenarios this bit is to be cleared (enable = false).
- *
- * Returns 0 on success, error is returned if I2C read/write fails.
- */
-int __init omap3_twl_set_sr_bit(bool enable)
-{
-	u8 temp;
-	int ret;
-	if (twl_sr_enable_autoinit)
-		pr_warning("%s: unexpected multiple calls\n", __func__);
-
-	ret = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp,
-			      TWL4030_DCDC_GLOBAL_CFG);
-	if (ret)
-		goto err;
-
-	if (enable)
-		temp |= SMARTREFLEX_ENABLE;
-	else
-		temp &= ~SMARTREFLEX_ENABLE;
-
-	ret = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp,
-			       TWL4030_DCDC_GLOBAL_CFG);
-	if (!ret) {
-		twl_sr_enable_autoinit = true;
-		return 0;
-	}
-err:
-	pr_err("%s: Error access to TWL4030 (%d)\n", __func__, ret);
-	return ret;
-}
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index c33e07e2f0d4..90c88d498485 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -16,12 +16,14 @@
 #include <linux/wl12xx.h>
 
 #include <linux/platform_data/pinctrl-single.h>
+#include <linux/platform_data/iommu-omap.h>
 
 #include "am35xx.h"
 #include "common.h"
 #include "common-board-devices.h"
 #include "dss-common.h"
 #include "control.h"
+#include "omap_device.h"
 #include "omap-secure.h"
 #include "soc.h"
 
@@ -33,20 +35,6 @@ struct pdata_init {
 struct of_dev_auxdata omap_auxdata_lookup[];
 static struct twl4030_gpio_platform_data twl_gpio_auxdata;
 
-/*
- * Create alias for USB host PHY clock.
- * Remove this when clock phandle can be provided via DT
- */
-static void __init __used legacy_init_ehci_clk(char *clkname)
-{
-	int ret;
-
-	ret = clk_add_alias("main_clk", NULL, clkname, NULL);
-	if (ret)
-		pr_err("%s:Failed to add main_clk alias to %s :%d\n",
-		       __func__, clkname, ret);
-}
-
 #if IS_ENABLED(CONFIG_WL12XX)
 
 static struct wl12xx_platform_data wl12xx __initdata;
@@ -94,6 +82,12 @@ static void __init hsmmc2_internal_input_clk(void)
 	omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1);
 }
 
+static struct iommu_platform_data omap3_iommu_pdata = {
+	.reset_name = "mmu",
+	.assert_reset = omap_device_assert_hardreset,
+	.deassert_reset = omap_device_deassert_hardreset,
+};
+
 static int omap3_sbc_t3730_twl_callback(struct device *dev,
 					   unsigned gpio,
 					   unsigned ngpio)
@@ -101,7 +95,7 @@ static int omap3_sbc_t3730_twl_callback(struct device *dev,
 	int res;
 
 	res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
-			       "wlan rst");
+			       "wlan pwr");
 	if (res)
 		return res;
 
@@ -110,6 +104,23 @@ static int omap3_sbc_t3730_twl_callback(struct device *dev,
 	return 0;
 }
 
+static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
+{
+	int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name);
+
+	if (err) {
+		pr_err("SBC-T3x: %s reset gpio request failed: %d\n",
+			hub_name, err);
+		return;
+	}
+
+	gpio_export(gpio, 0);
+
+	udelay(10);
+	gpio_set_value(gpio, 1);
+	msleep(1);
+}
+
 static void __init omap3_sbc_t3730_twl_init(void)
 {
 	twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
@@ -117,13 +128,19 @@ static void __init omap3_sbc_t3730_twl_init(void)
 
 static void __init omap3_sbc_t3730_legacy_init(void)
 {
+	omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
 	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136);
 	omap_ads7846_init(1, 57, 0, NULL);
 }
 
+static void __init omap3_sbc_t3530_legacy_init(void)
+{
+	omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
+	omap_ads7846_init(1, 57, 0, NULL);
+}
+
 static void __init omap3_igep0020_legacy_init(void)
 {
-	omap3_igep2_display_init_of();
 }
 
 static void __init omap3_evm_legacy_init(void)
@@ -162,7 +179,7 @@ static struct emac_platform_data am35xx_emac_pdata = {
 	.interrupt_disable	= am35xx_disable_emac_int,
 };
 
-static void __init am3517_evm_legacy_init(void)
+static void __init am35xx_emac_reset(void)
 {
 	u32 v;
 
@@ -172,6 +189,51 @@ static void __init am3517_evm_legacy_init(void)
 	omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
 }
 
+static struct gpio cm_t3517_wlan_gpios[] __initdata = {
+	{ 56,	GPIOF_OUT_INIT_HIGH,	"wlan pwr" },
+	{ 4,	GPIOF_OUT_INIT_HIGH,	"xcvr noe" },
+};
+
+static void __init omap3_sbc_t3517_wifi_init(void)
+{
+	int err = gpio_request_array(cm_t3517_wlan_gpios,
+				ARRAY_SIZE(cm_t3517_wlan_gpios));
+	if (err) {
+		pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err);
+		return;
+	}
+
+	gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
+	gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
+
+	msleep(100);
+	gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
+}
+
+static void __init omap3_sbc_t3517_legacy_init(void)
+{
+	omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub");
+	omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub");
+	am35xx_emac_reset();
+	hsmmc2_internal_input_clk();
+	omap3_sbc_t3517_wifi_init();
+	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145);
+	omap_ads7846_init(1, 57, 0, NULL);
+}
+
+static void __init am3517_evm_legacy_init(void)
+{
+	am35xx_emac_reset();
+}
+
+static struct platform_device omap3_rom_rng_device = {
+	.name		= "omap3-rom-rng",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= rx51_secure_rng_call,
+	},
+};
+
 static void __init nokia_n900_legacy_init(void)
 {
 	hsmmc2_internal_input_clk();
@@ -185,6 +247,10 @@ static void __init nokia_n900_legacy_init(void)
 			pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n");
 			pr_warning("Thumb binaries may crash randomly without this workaround\n");
 		}
+
+		pr_info("RX-51: Registring OMAP3 HWRNG device\n");
+		platform_device_register(&omap3_rom_rng_device);
+
 	}
 }
 #endif /* CONFIG_ARCH_OMAP3 */
@@ -192,23 +258,39 @@ static void __init nokia_n900_legacy_init(void)
 #ifdef CONFIG_ARCH_OMAP4
 static void __init omap4_sdp_legacy_init(void)
 {
-	omap_4430sdp_display_init_of();
 	legacy_init_wl12xx(WL12XX_REFCLOCK_26,
 			   WL12XX_TCXOCLOCK_26, 53);
 }
 
 static void __init omap4_panda_legacy_init(void)
 {
-	omap4_panda_display_init_of();
-	legacy_init_ehci_clk("auxclk3_ck");
 	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
 }
+
+static void __init var_som_om44_legacy_init(void)
+{
+	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 41);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+static struct iommu_platform_data omap4_iommu_pdata = {
+	.reset_name = "mmu_cache",
+	.assert_reset = omap_device_assert_hardreset,
+	.deassert_reset = omap_device_deassert_hardreset,
+};
+#endif
+
+#ifdef CONFIG_SOC_AM33XX
+static void __init am335x_evmsk_legacy_init(void)
+{
+	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 31);
+}
 #endif
 
 #ifdef CONFIG_SOC_OMAP5
 static void __init omap5_uevm_legacy_init(void)
 {
-	legacy_init_ehci_clk("auxclk1_ck");
 }
 #endif
 
@@ -259,6 +341,8 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
+		       &omap3_iommu_pdata),
 	/* Only on am3517 */
 	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
 	OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
@@ -268,6 +352,12 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
 #endif
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
+		       &omap4_iommu_pdata),
+	OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
+		       &omap4_iommu_pdata),
+#endif
 	{ /* sentinel */ },
 };
 
@@ -277,6 +367,8 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
  */
 static struct pdata_init pdata_quirks[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP3
+	{ "compulab,omap3-sbc-t3517", omap3_sbc_t3517_legacy_init, },
+	{ "compulab,omap3-sbc-t3530", omap3_sbc_t3530_legacy_init, },
 	{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
 	{ "nokia,omap3-n900", nokia_n900_legacy_init, },
 	{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
@@ -289,6 +381,11 @@ static struct pdata_init pdata_quirks[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP4
 	{ "ti,omap4-sdp", omap4_sdp_legacy_init, },
 	{ "ti,omap4-panda", omap4_panda_legacy_init, },
+	{ "variscite,var-dvk-om44", var_som_om44_legacy_init, },
+	{ "variscite,var-stk-om44", var_som_om44_legacy_init, },
+#endif
+#ifdef CONFIG_SOC_AM33XX
+	{ "ti,am335x-evmsk", am335x_evmsk_legacy_init, },
 #endif
 #ifdef CONFIG_SOC_OMAP5
 	{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index e1b41416fbf1..828aee9ea6a8 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -32,11 +32,13 @@
 #include "pm.h"
 #include "twl-common.h"
 
+#ifdef CONFIG_SUSPEND
 /*
  * omap_pm_suspend: points to a function that does the SoC-specific
  * suspend work
  */
-int (*omap_pm_suspend)(void);
+static int (*omap_pm_suspend)(void);
+#endif
 
 #ifdef CONFIG_PM
 /**
@@ -243,6 +245,15 @@ static const struct platform_suspend_ops omap_pm_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
+/**
+ * omap_common_suspend_init - Set common suspend routines for OMAP SoCs
+ * @pm_suspend: function pointer to SoC specific suspend function
+ */
+void omap_common_suspend_init(void *pm_suspend)
+{
+	omap_pm_suspend = pm_suspend;
+	suspend_set_ops(&omap_pm_ops);
+}
 #endif /* CONFIG_SUSPEND */
 
 static void __init omap3_init_voltages(void)
@@ -287,32 +298,24 @@ omap_postcore_initcall(omap2_common_pm_init);
 
 int __init omap2_common_pm_late_init(void)
 {
-	/*
-	 * In the case of DT, the PMIC and SR initialization will be done using
-	 * a completely different mechanism.
-	 * Disable this part if a DT blob is available.
-	 */
-	if (!of_have_populated_dt()) {
-
-		/* Init the voltage layer */
-		omap_pmic_late_init();
-		omap_voltage_late_init();
+	if (of_have_populated_dt()) {
+		omap3_twl_init();
+		omap4_twl_init();
+	}
 
-		/* Initialize the voltages */
-		omap3_init_voltages();
-		omap4_init_voltages();
+	/* Init the voltage layer */
+	omap_pmic_late_init();
+	omap_voltage_late_init();
 
-		/* Smartreflex device init */
-		omap_devinit_smartreflex();
+	/* Initialize the voltages */
+	omap3_init_voltages();
+	omap4_init_voltages();
 
-	}
+	/* Smartreflex device init */
+	omap_devinit_smartreflex();
 
 	/* cpufreq dummy device instantiation */
 	omap_init_cpufreq();
 
-#ifdef CONFIG_SUSPEND
-	suspend_set_ops(&omap_pm_ops);
-#endif
-
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 7bdd22afce69..e150102d6c06 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -34,7 +34,6 @@ extern void *omap3_secure_ram_storage;
 extern void omap3_pm_off_mode_enable(int);
 extern void omap_sram_idle(void);
 extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused);
-extern int (*omap_pm_suspend)(void);
 
 #if defined(CONFIG_PM_OPP)
 extern int omap3_opp_init(void);
@@ -103,7 +102,7 @@ static inline void enable_omap3630_toggle_l2_on_restore(void) { }
 
 #define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD	(1 << 0)
 
-#if defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
 extern u16 pm44xx_errata;
 #define IS_PM44XX_ERRATUM(id)		(pm44xx_errata & (id))
 #else
@@ -147,4 +146,11 @@ static inline void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) { *tstart = *
 static inline void omap_pm_setup_sr_i2c_pcb_length(u32 mm) { }
 #endif
 
+#ifdef CONFIG_SUSPEND
+void omap_common_suspend_init(void *pm_suspend);
+#else
+static inline void omap_common_suspend_init(void *pm_suspend)
+{
+}
+#endif /* CONFIG_SUSPEND */
 #endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 8c0759496c8d..a5ea988ff340 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -229,9 +229,7 @@ static void __init prcm_setup_regs(void)
 	clkdm_for_each(omap_pm_clkdms_setup, NULL);
 	clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
 
-#ifdef CONFIG_SUSPEND
-	omap_pm_suspend = omap2_enter_full_retention;
-#endif
+	omap_common_suspend_init(omap2_enter_full_retention);
 
 	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
 	 * stabilisation */
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 1f3770a8a728..507d8eeaab95 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -50,6 +50,7 @@
 #include "sdrc.h"
 #include "sram.h"
 #include "control.h"
+#include "vc.h"
 
 /* pm34xx errata defined in pm.h */
 u16 pm34xx_errata;
@@ -288,6 +289,9 @@ void omap_sram_idle(void)
 		}
 	}
 
+	/* Configure PMIC signaling for I2C4 or sys_off_mode */
+	omap3_vc_set_pmic_signaling(core_next_state);
+
 	omap3_intc_prepare_idle();
 
 	/*
@@ -330,10 +334,6 @@ void omap_sram_idle(void)
 			omap3_sram_restore_context();
 			omap2_sms_restore_context();
 		}
-		if (core_next_state == PWRDM_POWER_OFF)
-			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
-					       OMAP3430_GR_MOD,
-					       OMAP3_PRM_VOLTCTRL_OFFSET);
 	}
 	omap3_intc_resume_idle();
 
@@ -395,7 +395,8 @@ restore:
 
 	return ret;
 }
-
+#else
+#define omap3_pm_suspend NULL
 #endif /* CONFIG_SUSPEND */
 
 
@@ -709,9 +710,7 @@ int __init omap3_pm_init(void)
 	per_clkdm = clkdm_lookup("per_clkdm");
 	wkup_clkdm = clkdm_lookup("wkup_clkdm");
 
-#ifdef CONFIG_SUSPEND
-	omap_pm_suspend = omap3_pm_suspend;
-#endif
+	omap_common_suspend_init(omap3_pm_suspend);
 
 	arm_pm_idle = omap3_pm_idle;
 	omap3_idle_init();
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index eefb30cfcabd..0dda6cf8b855 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -96,6 +96,8 @@ static int omap4_pm_suspend(void)
 
 	return 0;
 }
+#else
+#define omap4_pm_suspend NULL
 #endif /* CONFIG_SUSPEND */
 
 static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
@@ -251,9 +253,7 @@ int __init omap4_pm_init(void)
 
 	(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
 
-#ifdef CONFIG_SUSPEND
-	omap_pm_suspend = omap4_pm_suspend;
-#endif
+	omap_common_suspend_init(omap4_pm_suspend);
 
 	/* Overwrite the default cpu_do_idle() */
 	arm_pm_idle = omap_default_idle;
diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c
index c0aeabfcf009..c40e5f009826 100644
--- a/arch/arm/mach-omap2/powerdomain-common.c
+++ b/arch/arm/mach-omap2/powerdomain-common.c
@@ -17,7 +17,6 @@
 #include "pm.h"
 #include "cm.h"
 #include "cm-regbits-34xx.h"
-#include "cm-regbits-44xx.h"
 #include "prm-regbits-34xx.h"
 #include "prm-regbits-44xx.h"
 
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 93a2a6e4260f..faebd5f076af 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -32,6 +32,7 @@
 
 #include "powerdomain.h"
 #include "clockdomain.h"
+#include "voltage.h"
 
 #include "soc.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index da5a59ae77b6..f4727117f6cc 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -21,8 +21,6 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 
-#include "voltage.h"
-
 /* Powerdomain basic power states */
 #define PWRDM_POWER_OFF		0x0
 #define PWRDM_POWER_RET		0x1
@@ -75,6 +73,7 @@
 
 struct clockdomain;
 struct powerdomain;
+struct voltagedomain;
 
 /**
  * struct powerdomain - OMAP powerdomain
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 0e841fd9498a..a8e4b582c527 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -428,6 +428,28 @@
 #define MAX_IOPAD_LATCH_TIME			100
 # ifndef __ASSEMBLER__
 
+#include <linux/delay.h>
+
+/**
+ * omap_test_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed.  To use, define some integer @index in the
+ * calling code.  After running, if @index == @timeout, then the loop has
+ * timed out.
+ */
+#define omap_test_timeout(cond, timeout, index)			\
+({								\
+	for (index = 0; index < timeout; index++) {		\
+		if (cond)					\
+			break;					\
+		udelay(1);					\
+	}							\
+})
+
 /**
  * struct omap_prcm_irq - describes a PRCM interrupt bit
  * @name: a short name describing the interrupt type, e.g. "wkup" or "io"
@@ -458,6 +480,7 @@ struct omap_prcm_irq {
  * @ocp_barrier: fn ptr to force buffered PRM writes to complete
  * @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs
  * @restore_irqen: fn ptr to save and clear IRQENABLE regs
+ * @reconfigure_io_chain: fn ptr to reconfigure IO chain
  * @saved_mask: IRQENABLE regs are saved here during suspend
  * @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true
  * @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init
@@ -479,6 +502,7 @@ struct omap_prcm_irq_setup {
 	void (*ocp_barrier)(void);
 	void (*save_and_clear_irqen)(u32 *saved_mask);
 	void (*restore_irqen)(u32 *saved_mask);
+	void (*reconfigure_io_chain)(void);
 	u32 *saved_mask;
 	u32 *priority_mask;
 	int base_irq;
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c
index c30e44a7fab0..cdbee6326d29 100644
--- a/arch/arm/mach-omap2/prcm_mpu44xx.c
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.c
@@ -30,12 +30,12 @@ void __iomem *prcm_mpu_base;
 
 u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg)
 {
-	return __raw_readl(OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
+	return readl_relaxed(OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
 }
 
 void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 reg)
 {
-	__raw_writel(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
+	writel_relaxed(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
 }
 
 u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h
index 059bd4f49035..ac9cb4550239 100644
--- a/arch/arm/mach-omap2/prcm_mpu44xx.h
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.h
@@ -26,7 +26,6 @@
 #define __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H
 
 #include "prcm_mpu_44xx_54xx.h"
-#include "common.h"
 
 #define OMAP4430_PRCM_MPU_BASE			0x48243000
 
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index cebad565ed37..106132db532b 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -123,8 +123,15 @@
 #define OMAP3430_GLOBAL_SW_RST_SHIFT			1
 #define OMAP3430_GLOBAL_COLD_RST_SHIFT			0
 #define OMAP3430_GLOBAL_COLD_RST_MASK			(1 << 0)
-#define OMAP3430_SEL_OFF_MASK				(1 << 3)
-#define OMAP3430_AUTO_OFF_MASK				(1 << 2)
+#define OMAP3430_PRM_VOLTCTRL_SEL_VMODE			(1 << 4)
+#define OMAP3430_PRM_VOLTCTRL_SEL_OFF			(1 << 3)
+#define OMAP3430_PRM_VOLTCTRL_AUTO_OFF			(1 << 2)
+#define OMAP3430_PRM_VOLTCTRL_AUTO_RET			(1 << 1)
+#define OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP		(1 << 0)
 #define OMAP3430_SETUP_TIME2_MASK			(0xffff << 16)
 #define OMAP3430_SETUP_TIME1_MASK			(0xffff << 0)
+#define OMAP3430_PRM_POLCTRL_OFFMODE_POL		(1 << 3)
+#define OMAP3430_PRM_POLCTRL_CLKOUT_POL			(1 << 2)
+#define OMAP3430_PRM_POLCTRL_CLKREQ_POL			(1 << 1)
+#define OMAP3430_PRM_POLCTRL_EXTVOL_POL			(1 << 0)
 #endif
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 623db40fdbbd..48480d557b61 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -17,10 +17,18 @@
 
 # ifndef __ASSEMBLER__
 extern void __iomem *prm_base;
+extern u16 prm_features;
 extern void omap2_set_globals_prm(void __iomem *prm);
 int of_prcm_init(void);
 # endif
 
+/*
+ * prm_features flag values
+ *
+ * PRM_HAS_IO_WAKEUP: has IO wakeup capability
+ * PRM_HAS_VOLTAGE: has voltage domains
+ */
+#define PRM_HAS_IO_WAKEUP	(1 << 0)
 
 /*
  * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP
@@ -118,6 +126,7 @@ struct prm_reset_src_map {
  * @read_reset_sources: ptr to the SoC PRM-specific get_reset_source impl
  * @was_any_context_lost_old: ptr to the SoC PRM context loss test fn
  * @clear_context_loss_flags_old: ptr to the SoC PRM context loss flag clear fn
+ * @late_init: ptr to the late init function
  *
  * XXX @was_any_context_lost_old and @clear_context_loss_flags_old are
  * deprecated.
@@ -126,6 +135,7 @@ struct prm_ll_data {
 	u32 (*read_reset_sources)(void);
 	bool (*was_any_context_lost_old)(u8 part, s16 inst, u16 idx);
 	void (*clear_context_loss_flags_old)(u8 part, s16 inst, u16 idx);
+	int (*late_init)(void);
 };
 
 extern int prm_register(struct prm_ll_data *pld);
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index 418de9c3b319..a3a3cca2bcc4 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -18,9 +18,6 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 
-#include "soc.h"
-#include "common.h"
-#include "vp.h"
 #include "powerdomain.h"
 #include "clockdomain.h"
 #include "prm2xxx.h"
@@ -201,19 +198,11 @@ static struct prm_ll_data omap2xxx_prm_ll_data = {
 
 int __init omap2xxx_prm_init(void)
 {
-	if (!cpu_is_omap24xx())
-		return 0;
-
 	return prm_register(&omap2xxx_prm_ll_data);
 }
 
 static void __exit omap2xxx_prm_exit(void)
 {
-	if (!cpu_is_omap24xx())
-		return;
-
-	/* Should never happen */
-	WARN(prm_unregister(&omap2xxx_prm_ll_data),
-	     "%s: prm_ll_data function pointer mismatch\n", __func__);
+	prm_unregister(&omap2xxx_prm_ll_data);
 }
 __exitcall(omap2xxx_prm_exit);
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
index 3194dd87e0e4..d2cb6365716f 100644
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -27,7 +27,7 @@
 
 /*
  * OMAP2-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
+ * Use {read,write}l_relaxed() with these registers.
  *
  * With a few exceptions, these are the register names beginning with
  * PRCM_* on 24xx.  (The exceptions are the IRQSTATUS and IRQENABLE
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 947f6adfed0c..c13b4e293ffa 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -16,7 +16,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "common.h"
 #include "powerdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index 9624b40836d4..1a3a96392b97 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -55,12 +55,12 @@
 /* Power/reset management domain register get/set */
 static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
 {
-	return __raw_readl(prm_base + module + idx);
+	return readl_relaxed(prm_base + module + idx);
 }
 
 static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
 {
-	__raw_writel(val, prm_base + module + idx);
+	writel_relaxed(val, prm_base + module + idx);
 }
 
 /* Read-modify-write a register in a PRM module. Caller must lock */
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index 720440737744..62709cd2f9c5 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -19,7 +19,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "common.h"
 #include "powerdomain.h"
 #include "prm33xx.h"
 #include "prm-regbits-33xx.h"
@@ -27,13 +26,13 @@
 /* Read a register in a PRM instance */
 u32 am33xx_prm_read_reg(s16 inst, u16 idx)
 {
-	return __raw_readl(prm_base + inst + idx);
+	return readl_relaxed(prm_base + inst + idx);
 }
 
 /* Write into a register in a PRM instance */
 void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx)
 {
-	__raw_writel(val, prm_base + inst + idx);
+	writel_relaxed(val, prm_base + inst + idx);
 }
 
 /* Read-modify-write a register in PRM. Caller must lock */
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 7721990d2006..4bd7a2dca8af 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -43,6 +43,7 @@ static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
 	.ocp_barrier		= &omap3xxx_prm_ocp_barrier,
 	.save_and_clear_irqen	= &omap3xxx_prm_save_and_clear_irqen,
 	.restore_irqen		= &omap3xxx_prm_restore_irqen,
+	.reconfigure_io_chain	= &omap3xxx_prm_reconfigure_io_chain,
 };
 
 /*
@@ -246,7 +247,7 @@ void omap3xxx_prm_reconfigure_io_chain(void)
  */
 static void __init omap3xxx_prm_enable_io_wakeup(void)
 {
-	if (omap3_has_io_wakeup())
+	if (prm_features & PRM_HAS_IO_WAKEUP)
 		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
 					   PM_WKEN);
 }
@@ -400,23 +401,26 @@ struct pwrdm_ops omap3_pwrdm_operations = {
  *
  */
 
+static int omap3xxx_prm_late_init(void);
+
 static struct prm_ll_data omap3xxx_prm_ll_data = {
 	.read_reset_sources = &omap3xxx_prm_read_reset_sources,
+	.late_init = &omap3xxx_prm_late_init,
 };
 
 int __init omap3xxx_prm_init(void)
 {
-	if (!cpu_is_omap34xx())
-		return 0;
+	if (omap3_has_io_wakeup())
+		prm_features |= PRM_HAS_IO_WAKEUP;
 
 	return prm_register(&omap3xxx_prm_ll_data);
 }
 
-static int __init omap3xxx_prm_late_init(void)
+static int omap3xxx_prm_late_init(void)
 {
 	int ret;
 
-	if (!cpu_is_omap34xx())
+	if (!(prm_features & PRM_HAS_IO_WAKEUP))
 		return 0;
 
 	omap3xxx_prm_enable_io_wakeup();
@@ -427,15 +431,9 @@ static int __init omap3xxx_prm_late_init(void)
 
 	return ret;
 }
-omap_subsys_initcall(omap3xxx_prm_late_init);
 
 static void __exit omap3xxx_prm_exit(void)
 {
-	if (!cpu_is_omap34xx())
-		return;
-
-	/* Should never happen */
-	WARN(prm_unregister(&omap3xxx_prm_ll_data),
-	     "%s: prm_ll_data function pointer mismatch\n", __func__);
+	prm_unregister(&omap3xxx_prm_ll_data);
 }
 __exitcall(omap3xxx_prm_exit);
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index f8eb83323b1a..1dacfc5b1959 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -26,7 +26,7 @@
 
 /*
  * OMAP3-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
+ * Use {read,write}l_relaxed() with these registers.
  *
  * With a few exceptions, these are the register names beginning with
  * PRM_* on 34xx.  (The exceptions are the IRQSTATUS and IRQENABLE
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 03a603476cfc..a7f6ea27180a 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -47,6 +47,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
 	.ocp_barrier		= &omap44xx_prm_ocp_barrier,
 	.save_and_clear_irqen	= &omap44xx_prm_save_and_clear_irqen,
 	.restore_irqen		= &omap44xx_prm_restore_irqen,
+	.reconfigure_io_chain	= &omap44xx_prm_reconfigure_io_chain,
 };
 
 /*
@@ -81,13 +82,13 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = {
 /* Read a register in a CM/PRM instance in the PRM module */
 u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
 {
-	return __raw_readl(prm_base + inst + reg);
+	return readl_relaxed(prm_base + inst + reg);
 }
 
 /* Write into a register in a CM/PRM instance in the PRM module */
 void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
 {
-	__raw_writel(val, prm_base + inst + reg);
+	writel_relaxed(val, prm_base + inst + reg);
 }
 
 /* Read-modify-write a register in a PRM module. Caller must lock */
@@ -649,6 +650,8 @@ struct pwrdm_ops omap4_pwrdm_operations = {
 	.pwrdm_has_voltdm	= omap4_check_vcvp,
 };
 
+static int omap44xx_prm_late_init(void);
+
 /*
  * XXX document
  */
@@ -656,34 +659,29 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 	.read_reset_sources = &omap44xx_prm_read_reset_sources,
 	.was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old,
 	.clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old,
+	.late_init = &omap44xx_prm_late_init,
 };
 
 int __init omap44xx_prm_init(void)
 {
-	if (!cpu_is_omap44xx() && !soc_is_omap54xx() && !soc_is_dra7xx())
-		return 0;
+	if (cpu_is_omap44xx())
+		prm_features |= PRM_HAS_IO_WAKEUP;
 
 	return prm_register(&omap44xx_prm_ll_data);
 }
 
-static int __init omap44xx_prm_late_init(void)
+static int omap44xx_prm_late_init(void)
 {
-	if (!cpu_is_omap44xx())
+	if (!(prm_features & PRM_HAS_IO_WAKEUP))
 		return 0;
 
 	omap44xx_prm_enable_io_wakeup();
 
 	return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
 }
-omap_subsys_initcall(omap44xx_prm_late_init);
 
 static void __exit omap44xx_prm_exit(void)
 {
-	if (!cpu_is_omap44xx())
-		return;
-
-	/* Should never happen */
-	WARN(prm_unregister(&omap44xx_prm_ll_data),
-	     "%s: prm_ll_data function pointer mismatch\n", __func__);
+	prm_unregister(&omap44xx_prm_ll_data);
 }
 __exitcall(omap44xx_prm_exit);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index b4c4ab9c8044..25e8b8232115 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -62,6 +62,8 @@ static struct omap_prcm_irq_setup *prcm_irq_setup;
 /* prm_base: base virtual address of the PRM IP block */
 void __iomem *prm_base;
 
+u16 prm_features;
+
 /*
  * prm_ll_data: function pointers to SoC-specific implementations of
  * common PRM functions
@@ -330,12 +332,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 
 	if (of_have_populated_dt()) {
 		int irq = omap_prcm_event_to_irq("io");
-		if (cpu_is_omap34xx())
-			omap_pcs_legacy_init(irq,
-				omap3xxx_prm_reconfigure_io_chain);
-		else
-			omap_pcs_legacy_init(irq,
-				omap44xx_prm_reconfigure_io_chain);
+		omap_pcs_legacy_init(irq, irq_setup->reconfigure_io_chain);
 	}
 
 	return 0;
@@ -530,3 +527,11 @@ int __init of_prcm_init(void)
 
 	return 0;
 }
+
+static int __init prm_late_init(void)
+{
+	if (prm_ll_data->late_init)
+		return prm_ll_data->late_init();
+	return 0;
+}
+subsys_initcall(prm_late_init);
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 280f3c58abe5..69f0dd08629c 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -25,6 +25,7 @@
 #include "prminst44xx.h"
 #include "prm-regbits-44xx.h"
 #include "prcm44xx.h"
+#include "prcm43xx.h"
 #include "prcm_mpu44xx.h"
 #include "soc.h"
 
@@ -48,7 +49,7 @@ u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_prm_bases[part]);
-	return __raw_readl(_prm_bases[part] + inst + idx);
+	return readl_relaxed(_prm_bases[part] + inst + idx);
 }
 
 /* Write into a register in a PRM instance */
@@ -57,7 +58,7 @@ void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_prm_bases[part]);
-	__raw_writel(val, _prm_bases[part] + inst + idx);
+	writel_relaxed(val, _prm_bases[part] + inst + idx);
 }
 
 /* Read-modify-write a register in PRM. Caller must lock */
@@ -176,6 +177,8 @@ void omap4_prminst_global_warm_sw_reset(void)
 		dev_inst = OMAP54XX_PRM_DEVICE_INST;
 	else if (soc_is_dra7xx())
 		dev_inst = DRA7XX_PRM_DEVICE_INST;
+	else if (soc_is_am43xx())
+		dev_inst = AM43XX_PRM_DEVICE_INST;
 	else
 		return;
 
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 446aa13511fd..645a2a46b213 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -31,24 +31,24 @@ extern void __iomem *omap2_sms_base;
 
 static inline void sdrc_write_reg(u32 val, u16 reg)
 {
-	__raw_writel(val, OMAP_SDRC_REGADDR(reg));
+	writel_relaxed(val, OMAP_SDRC_REGADDR(reg));
 }
 
 static inline u32 sdrc_read_reg(u16 reg)
 {
-	return __raw_readl(OMAP_SDRC_REGADDR(reg));
+	return readl_relaxed(OMAP_SDRC_REGADDR(reg));
 }
 
 /* SMS global register get/set */
 
 static inline void sms_write_reg(u32 val, u16 reg)
 {
-	__raw_writel(val, OMAP_SMS_REGADDR(reg));
+	writel_relaxed(val, OMAP_SMS_REGADDR(reg));
 }
 
 static inline u32 sms_read_reg(u16 reg)
 {
-	return __raw_readl(OMAP_SMS_REGADDR(reg));
+	return readl_relaxed(OMAP_SMS_REGADDR(reg));
 }
 
 extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms);
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 907291714643..ae3f1553158d 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -103,9 +103,9 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
 	 * prm2xxx.c function
 	 */
 	if (cpu_is_omap2420())
-		__raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP);
+		writel_relaxed(0xffff, OMAP2420_PRCM_VOLTSETUP);
 	else
-		__raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP);
+		writel_relaxed(0xffff, OMAP2430_PRCM_VOLTSETUP);
 	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
 	curr_perf_level = level;
 	local_irq_restore(flags);
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 076bd90a6ce0..de2a34c423a7 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -438,7 +438,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define AM335X_REV_ES2_1	(AM335X_CLASS | (0x2 << 8))
 
 #define AM437X_CLASS		0x43700000
-#define AM437X_REV_ES1_0	AM437X_CLASS
+#define AM437X_REV_ES1_0	(AM437X_CLASS | (0x10 << 8))
+#define AM437X_REV_ES1_1	(AM437X_CLASS | (0x11 << 8))
 
 #define OMAP443X_CLASS		0x44300044
 #define OMAP4430_REV_ES1_0	(OMAP443X_CLASS | (0x10 << 8))
@@ -458,10 +459,15 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP5430_REV_ES2_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8))
 #define OMAP5432_REV_ES2_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8))
 
+#define DRA7XX_CLASS		0x07000000
+#define DRA752_REV_ES1_0	(DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8))
+#define DRA752_REV_ES1_1	(DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8))
+
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);
 void omap4xxx_check_revision(void);
 void omap5xxx_check_revision(void);
+void dra7xxx_check_revision(void);
 void omap3xxx_check_features(void);
 void ti81xx_check_features(void);
 void am33xx_check_features(void);
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index d7bc33f15344..1b91ef0c182a 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -57,7 +57,7 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 
 		/*
 		 * In OMAP4 the efuse registers are 24 bit aligned.
-		 * A __raw_readl will fail for non-32 bit aligned address
+		 * A readl_relaxed will fail for non-32 bit aligned address
 		 * and hence the 8-bit read and shift.
 		 */
 		if (cpu_is_omap44xx()) {
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
index 4bd096836235..ddf1818af228 100644
--- a/arch/arm/mach-omap2/sram.c
+++ b/arch/arm/mach-omap2/sram.c
@@ -70,16 +70,16 @@ static int is_sram_locked(void)
 	if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
 		/* RAMFW: R/W access to all initiators for all qualifier sets */
 		if (cpu_is_omap242x()) {
-			__raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
-			__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0);  /* all i-read */
-			__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
+			writel_relaxed(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
+			writel_relaxed(0xCFDE, OMAP24XX_VA_READPERM0);  /* all i-read */
+			writel_relaxed(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
 		}
 		if (cpu_is_omap34xx()) {
-			__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
-			__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0);  /* all i-read */
-			__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
-			__raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
-			__raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
+			writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
+			writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0);  /* all i-read */
+			writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
+			writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2);
+			writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
 		}
 		return 0;
 	} else
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 74044aaf438b..43d03fbf4c0b 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -361,7 +361,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 
 /* Clocksource code */
 static struct omap_dm_timer clksrc;
-static bool use_gptimer_clksrc;
+static bool use_gptimer_clksrc __initdata;
 
 /*
  * clocksource
@@ -546,15 +546,15 @@ static void __init realtime_counter_init(void)
 	}
 
 	/* Program numerator and denumerator registers */
-	reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) &
+	reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) &
 			NUMERATOR_DENUMERATOR_MASK;
 	reg |= num;
-	__raw_writel(reg, base + INCREMENTER_NUMERATOR_OFFSET);
+	writel_relaxed(reg, base + INCREMENTER_NUMERATOR_OFFSET);
 
-	reg = __raw_readl(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) &
+	reg = readl_relaxed(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) &
 			NUMERATOR_DENUMERATOR_MASK;
 	reg |= den;
-	__raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
+	writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
 
 	arch_timer_freq = (rate / den) * num;
 	set_cntfreq();
@@ -604,7 +604,8 @@ OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure",
 			2, "timer_sys_ck", NULL);
 #endif /* CONFIG_ARCH_OMAP3 */
 
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
+	defined(CONFIG_SOC_AM43XX)
 OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
 		       1, "timer_sys_ck", "ti,timer-alwon");
 #endif
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 10855eb4ccc1..745367c0c2bb 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -28,7 +28,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/usb/phy.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/usb/usb_phy_generic.h>
 
 #include "soc.h"
 #include "omap_device.h"
@@ -349,7 +349,7 @@ static struct fixed_voltage_config hsusb_reg_config = {
 	/* .init_data filled later */
 };
 
-static const char *nop_name = "usb_phy_gen_xceiv"; /* NOP PHY driver */
+static const char *nop_name = "usb_phy_generic"; /* NOP PHY driver */
 static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */
 
 /**
@@ -435,7 +435,7 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 	struct platform_device *pdev;
 	char *phy_id;
 	struct platform_device_info pdevinfo;
-	struct usb_phy_gen_xceiv_platform_data nop_pdata;
+	struct usb_phy_generic_platform_data nop_pdata;
 
 	for (i = 0; i < num_phys; i++) {
 
@@ -469,8 +469,8 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 		pdevinfo.id = phy->port;
 		pdevinfo.data = &nop_pdata;
 		pdevinfo.size_data =
-			sizeof(struct usb_phy_gen_xceiv_platform_data);
-		scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d",
+			sizeof(struct usb_phy_generic_platform_data);
+		scnprintf(phy_id, MAX_STR, "usb_phy_generic.%d",
 					phy->port);
 		pdev = platform_device_register_full(&pdevinfo);
 		if (IS_ERR(pdev)) {
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 49ac7977e03e..a4628a9e760c 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -220,10 +220,126 @@ static inline u32 omap_usec_to_32k(u32 usec)
 	return DIV_ROUND_UP_ULL(32768ULL * (u64)usec, 1000000ULL);
 }
 
-/* Set oscillator setup time for omap3 */
-static void omap3_set_clksetup(u32 usec, struct voltagedomain *voltdm)
+struct omap3_vc_timings {
+	u32 voltsetup1;
+	u32 voltsetup2;
+};
+
+struct omap3_vc {
+	struct voltagedomain *vd;
+	u32 voltctrl;
+	u32 voltsetup1;
+	u32 voltsetup2;
+	struct omap3_vc_timings timings[2];
+};
+static struct omap3_vc vc;
+
+void omap3_vc_set_pmic_signaling(int core_next_state)
+{
+	struct voltagedomain *vd = vc.vd;
+	struct omap3_vc_timings *c = vc.timings;
+	u32 voltctrl, voltsetup1, voltsetup2;
+
+	voltctrl = vc.voltctrl;
+	voltsetup1 = vc.voltsetup1;
+	voltsetup2 = vc.voltsetup2;
+
+	switch (core_next_state) {
+	case PWRDM_POWER_OFF:
+		voltctrl &= ~(OMAP3430_PRM_VOLTCTRL_AUTO_RET |
+			      OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP);
+		voltctrl |= OMAP3430_PRM_VOLTCTRL_AUTO_OFF;
+		if (voltctrl & OMAP3430_PRM_VOLTCTRL_SEL_OFF)
+			voltsetup2 = c->voltsetup2;
+		else
+			voltsetup1 = c->voltsetup1;
+		break;
+	case PWRDM_POWER_RET:
+	default:
+		c++;
+		voltctrl &= ~(OMAP3430_PRM_VOLTCTRL_AUTO_OFF |
+			      OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP);
+		voltctrl |= OMAP3430_PRM_VOLTCTRL_AUTO_RET;
+		voltsetup1 = c->voltsetup1;
+		break;
+	}
+
+	if (voltctrl != vc.voltctrl) {
+		vd->write(voltctrl, OMAP3_PRM_VOLTCTRL_OFFSET);
+		vc.voltctrl = voltctrl;
+	}
+	if (voltsetup1 != vc.voltsetup1) {
+		vd->write(c->voltsetup1,
+			  OMAP3_PRM_VOLTSETUP1_OFFSET);
+		vc.voltsetup1 = voltsetup1;
+	}
+	if (voltsetup2 != vc.voltsetup2) {
+		vd->write(c->voltsetup2,
+			  OMAP3_PRM_VOLTSETUP2_OFFSET);
+		vc.voltsetup2 = voltsetup2;
+	}
+}
+
+#define PRM_POLCTRL_TWL_MASK	(OMAP3430_PRM_POLCTRL_CLKREQ_POL | \
+					OMAP3430_PRM_POLCTRL_CLKREQ_POL)
+#define PRM_POLCTRL_TWL_VAL	OMAP3430_PRM_POLCTRL_CLKREQ_POL
+
+/*
+ * Configure signal polarity for sys_clkreq and sys_off_mode pins
+ * as the default values are wrong and can cause the system to hang
+ * if any twl4030 scripts are loaded.
+ */
+static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
+{
+	u32 val;
+
+	if (vc.vd)
+		return;
+
+	vc.vd = voltdm;
+
+	val = voltdm->read(OMAP3_PRM_POLCTRL_OFFSET);
+	if (!(val & OMAP3430_PRM_POLCTRL_CLKREQ_POL) ||
+	    (val & OMAP3430_PRM_POLCTRL_CLKREQ_POL)) {
+		val |= OMAP3430_PRM_POLCTRL_CLKREQ_POL;
+		val &= ~OMAP3430_PRM_POLCTRL_OFFMODE_POL;
+		pr_debug("PM: fixing sys_clkreq and sys_off_mode polarity to 0x%x\n",
+			 val);
+		voltdm->write(val, OMAP3_PRM_POLCTRL_OFFSET);
+	}
+
+	/*
+	 * By default let's use I2C4 signaling for retention idle
+	 * and sys_off_mode pin signaling for off idle. This way we
+	 * have sys_clk_req pin go down for retention and both
+	 * sys_clk_req and sys_off_mode pins will go down for off
+	 * idle. And we can also scale voltages to zero for off-idle.
+	 * Note that no actual voltage scaling during off-idle will
+	 * happen unless the board specific twl4030 PMIC scripts are
+	 * loaded.
+	 */
+	val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
+	if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) {
+		val |= OMAP3430_PRM_VOLTCTRL_SEL_OFF;
+		pr_debug("PM: setting voltctrl sys_off_mode signaling to 0x%x\n",
+			 val);
+		voltdm->write(val, OMAP3_PRM_VOLTCTRL_OFFSET);
+	}
+	vc.voltctrl = val;
+
+	omap3_vc_set_pmic_signaling(PWRDM_POWER_ON);
+}
+
+static void omap3_init_voltsetup1(struct voltagedomain *voltdm,
+				  struct omap3_vc_timings *c, u32 idle)
 {
-	voltdm->write(omap_usec_to_32k(usec), OMAP3_PRM_CLKSETUP_OFFSET);
+	unsigned long val;
+
+	val = (voltdm->vc_param->on - idle) / voltdm->pmic->slew_rate;
+	val *= voltdm->sys_clk.rate / 8 / 1000000 + 1;
+	val <<= __ffs(voltdm->vfsm->voltsetup_mask);
+	c->voltsetup1 &= ~voltdm->vfsm->voltsetup_mask;
+	c->voltsetup1 |= val;
 }
 
 /**
@@ -236,37 +352,21 @@ static void omap3_set_clksetup(u32 usec, struct voltagedomain *voltdm)
  * or retention. Off mode has additionally an option to use sys_off_mode
  * pad, which uses a global signal to program the whole power IC to
  * off-mode.
+ *
+ * Note that pmic is not controlling the voltage scaling during
+ * retention signaled over I2C4, so we can keep voltsetup2 as 0.
+ * And the oscillator is not shut off over I2C4, so no need to
+ * set clksetup.
  */
-static void omap3_set_i2c_timings(struct voltagedomain *voltdm, bool off_mode)
+static void omap3_set_i2c_timings(struct voltagedomain *voltdm)
 {
-	unsigned long voltsetup1;
-	u32 tgt_volt;
-
-	/*
-	 * Oscillator is shut down only if we are using sys_off_mode pad,
-	 * thus we set a minimal setup time here
-	 */
-	omap3_set_clksetup(1, voltdm);
+	struct omap3_vc_timings *c = vc.timings;
 
-	if (off_mode)
-		tgt_volt = voltdm->vc_param->off;
-	else
-		tgt_volt = voltdm->vc_param->ret;
-
-	voltsetup1 = (voltdm->vc_param->on - tgt_volt) /
-			voltdm->pmic->slew_rate;
-
-	voltsetup1 = voltsetup1 * voltdm->sys_clk.rate / 8 / 1000000 + 1;
-
-	voltdm->rmw(voltdm->vfsm->voltsetup_mask,
-		voltsetup1 << __ffs(voltdm->vfsm->voltsetup_mask),
-		voltdm->vfsm->voltsetup_reg);
-
-	/*
-	 * pmic is not controlling the voltage scaling during retention,
-	 * thus set voltsetup2 to 0
-	 */
-	voltdm->write(0, OMAP3_PRM_VOLTSETUP2_OFFSET);
+	/* Configure PRWDM_POWER_OFF over I2C4 */
+	omap3_init_voltsetup1(voltdm, c, voltdm->vc_param->off);
+	c++;
+	/* Configure PRWDM_POWER_RET over I2C4 */
+	omap3_init_voltsetup1(voltdm, c, voltdm->vc_param->ret);
 }
 
 /**
@@ -275,69 +375,49 @@ static void omap3_set_i2c_timings(struct voltagedomain *voltdm, bool off_mode)
  *
  * Calculates and sets up off-mode timings for a channel. Off-mode
  * can use either I2C based voltage scaling, or alternatively
- * sys_off_mode pad can be used to send a global command to power IC.
- * This function first checks which mode is being used, and calls
- * omap3_set_i2c_timings() if the system is using I2C control mode.
+ * sys_off_mode pad can be used to send a global command to power IC.n,
  * sys_off_mode has the additional benefit that voltages can be
  * scaled to zero volt level with TWL4030 / TWL5030, I2C can only
  * scale to 600mV.
+ *
+ * Note that omap is not controlling the voltage scaling during
+ * off idle signaled by sys_off_mode, so we can keep voltsetup1
+ * as 0.
  */
 static void omap3_set_off_timings(struct voltagedomain *voltdm)
 {
-	unsigned long clksetup;
-	unsigned long voltsetup2;
-	unsigned long voltsetup2_old;
-	u32 val;
-	u32 tstart, tshut;
+	struct omap3_vc_timings *c = vc.timings;
+	u32 tstart, tshut, clksetup, voltoffset;
 
-	/* check if sys_off_mode is used to control off-mode voltages */
-	val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
-	if (!(val & OMAP3430_SEL_OFF_MASK)) {
-		/* No, omap is controlling them over I2C */
-		omap3_set_i2c_timings(voltdm, true);
+	if (c->voltsetup2)
 		return;
-	}
 
 	omap_pm_get_oscillator(&tstart, &tshut);
-	omap3_set_clksetup(tstart, voltdm);
-
-	clksetup = voltdm->read(OMAP3_PRM_CLKSETUP_OFFSET);
-
-	/* voltsetup 2 in us */
-	voltsetup2 = voltdm->vc_param->on / voltdm->pmic->slew_rate;
-
-	/* convert to 32k clk cycles */
-	voltsetup2 = DIV_ROUND_UP(voltsetup2 * 32768, 1000000);
-
-	voltsetup2_old = voltdm->read(OMAP3_PRM_VOLTSETUP2_OFFSET);
-
-	/*
-	 * Update voltsetup2 if higher than current value (needed because
-	 * we have multiple channels with different ramp times), also
-	 * update voltoffset always to value recommended by TRM
-	 */
-	if (voltsetup2 > voltsetup2_old) {
-		voltdm->write(voltsetup2, OMAP3_PRM_VOLTSETUP2_OFFSET);
-		voltdm->write(clksetup - voltsetup2,
-			OMAP3_PRM_VOLTOFFSET_OFFSET);
-	} else
-		voltdm->write(clksetup - voltsetup2_old,
-			OMAP3_PRM_VOLTOFFSET_OFFSET);
+	if (tstart == ULONG_MAX) {
+		pr_debug("PM: oscillator start-up time not initialized, using 10ms\n");
+		clksetup = omap_usec_to_32k(10000);
+	} else {
+		clksetup = omap_usec_to_32k(tstart);
+	}
 
 	/*
-	 * omap is not controlling voltage scaling during off-mode,
-	 * thus set voltsetup1 to 0
+	 * For twl4030 errata 27, we need to allow minimum ~488.32 us wait to
+	 * switch from HFCLKIN to internal oscillator. That means timings
+	 * have voltoffset fixed to 0xa in rounded up 32 KiHz cycles. And
+	 * that means we can calculate the value based on the oscillator
+	 * start-up time since voltoffset2 = clksetup - voltoffset.
 	 */
-	voltdm->rmw(voltdm->vfsm->voltsetup_mask, 0,
-		voltdm->vfsm->voltsetup_reg);
-
-	/* voltoffset must be clksetup minus voltsetup2 according to TRM */
-	voltdm->write(clksetup - voltsetup2, OMAP3_PRM_VOLTOFFSET_OFFSET);
+	voltoffset = omap_usec_to_32k(488);
+	c->voltsetup2 = clksetup - voltoffset;
+	voltdm->write(clksetup, OMAP3_PRM_CLKSETUP_OFFSET);
+	voltdm->write(voltoffset, OMAP3_PRM_VOLTOFFSET_OFFSET);
 }
 
 static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
 {
+	omap3_vc_init_pmic_signaling(voltdm);
 	omap3_set_off_timings(voltdm);
+	omap3_set_i2c_timings(voltdm);
 }
 
 /**
@@ -462,7 +542,7 @@ static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode)
 	val |= omap4_usec_to_val_scrm(tshut, OMAP4_DOWNTIME_SHIFT,
 		OMAP4_DOWNTIME_MASK);
 
-	__raw_writel(val, OMAP4_SCRM_CLKSETUPTIME);
+	writel_relaxed(val, OMAP4_SCRM_CLKSETUPTIME);
 }
 
 /* OMAP4 specific voltage init functions */
@@ -584,7 +664,7 @@ static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm)
 	val = i2c_data->loadbits << 25 | i2c_data->loadbits << 29;
 
 	/* Write to SYSCTRL_PADCONF_WKUP_CTRL_I2C_2 to setup I2C pull */
-	__raw_writel(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP +
+	writel_relaxed(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP +
 				OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2));
 
 	/* HSSCLH can always be zero */
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index 91c8d75bf2ea..cdbdd78e755e 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -117,6 +117,9 @@ extern struct omap_vc_param omap4_mpu_vc_data;
 extern struct omap_vc_param omap4_iva_vc_data;
 extern struct omap_vc_param omap4_core_vc_data;
 
+void omap3_vc_set_pmic_signaling(int core_next_state);
+
+
 void omap_vc_init_channel(struct voltagedomain *voltdm);
 int omap_vc_pre_scale(struct voltagedomain *voltdm,
 		      unsigned long target_volt,
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c
index d15c7bbab8e2..97d6607d447a 100644
--- a/arch/arm/mach-omap2/wd_timer.c
+++ b/arch/arm/mach-omap2/wd_timer.c
@@ -49,12 +49,12 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh)
 	}
 
 	/* sequence required to disable watchdog */
-	__raw_writel(0xAAAA, base + OMAP_WDT_SPR);
-	while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
+	writel_relaxed(0xAAAA, base + OMAP_WDT_SPR);
+	while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10)
 		cpu_relax();
 
-	__raw_writel(0x5555, base + OMAP_WDT_SPR);
-	while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
+	writel_relaxed(0x5555, base + OMAP_WDT_SPR);
+	while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10)
 		cpu_relax();
 
 	return 0;
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2cb2f06c20f5..2412efb6cdd9 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -5,6 +5,11 @@ menu "Orion Implementations"
 config ARCH_ORION5X_DT
 	bool "Marvell Orion5x Flattened Device Tree"
 	select USE_OF
+	select ORION_CLK
+	select ORION_IRQCHIP
+	select ORION_TIMER
+	select PINCTRL
+	select PINCTRL_ORION
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion5x using flattened device tree.
@@ -23,6 +28,14 @@ config MACH_RD88F5182
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-NAS (88F5182) RD2
 
+config MACH_RD88F5182_DT
+	bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)"
+	select ARCH_ORION5X_DT
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the Marvell
+	  Orion-NAS (88F5182) RD2, Flattened Device Tree.
+
 config MACH_KUROBOX_PRO
 	bool "KuroBox Pro"
 	select I2C_BOARDINFO
@@ -33,7 +46,6 @@ config MACH_KUROBOX_PRO
 config MACH_DNS323
 	bool "D-Link DNS-323"
 	select I2C_BOARDINFO
-	select PHYLIB
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  D-Link DNS-323 platform.
@@ -103,28 +115,13 @@ config MACH_MV2120
 	  Say 'Y' here if you want your kernel to support the
 	  HP Media Vault mv2120 or mv5100.
 
-config MACH_EDMINI_V2_DT
-	bool "LaCie Ethernet Disk mini V2 (Flattened Device Tree)"
-	select I2C_BOARDINFO
+config MACH_D2NET_DT
+	bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)"
 	select ARCH_ORION5X_DT
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  LaCie Ethernet Disk mini V2 (Flattened Device Tree).
-
-config MACH_D2NET
-	bool "LaCie d2 Network"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
 	  LaCie d2 Network NAS.
 
-config MACH_BIGDISK
-	bool "LaCie Big Disk Network"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie Big Disk Network NAS.
-
 config MACH_NET2BIG
 	bool "LaCie 2Big Network"
 	select I2C_BOARDINFO
@@ -132,8 +129,9 @@ config MACH_NET2BIG
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie 2Big Network NAS.
 
-config MACH_MSS2
-	bool "Maxtor Shared Storage II"
+config MACH_MSS2_DT
+	bool "Maxtor Shared Storage II (Flattened Device Tree)"
+	select ARCH_ORION5X_DT
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Maxtor Shared Storage II platform.
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 45da805fb236..a40b5c9a58c4 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -12,10 +12,7 @@ obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
 obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
-obj-$(CONFIG_MACH_D2NET)	+= d2net-setup.o
-obj-$(CONFIG_MACH_BIGDISK)	+= d2net-setup.o
 obj-$(CONFIG_MACH_NET2BIG)	+= net2big-setup.o
-obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
 obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_FXO)	+= rd88f5181l-fxo-setup.o
@@ -23,4 +20,6 @@ obj-$(CONFIG_MACH_RD88F6183AP_GE)	+= rd88f6183ap-ge-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_LSCHL)	+= ls-chl-setup.o
 
 obj-$(CONFIG_ARCH_ORION5X_DT)		+= board-dt.o
-obj-$(CONFIG_MACH_EDMINI_V2_DT)	+= edmini_v2-setup.o
+obj-$(CONFIG_MACH_D2NET_DT)	+= board-d2net.o
+obj-$(CONFIG_MACH_MSS2_DT)	+= board-mss2.o
+obj-$(CONFIG_MACH_RD88F5182_DT)	+= board-rd88f5182.o
diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c
new file mode 100644
index 000000000000..8a7284124153
--- /dev/null
+++ b/arch/arm/mach-orion5x/board-d2net.c
@@ -0,0 +1,109 @@
+/*
+ * arch/arm/mach-orion5x/board-d2net.c
+ *
+ * LaCie d2Network and Big Disk Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+
+/*****************************************************************************
+ * LaCie d2 Network Info
+ ****************************************************************************/
+
+/*****************************************************************************
+ * GPIO LED's
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to the CPLD and can blink in relation with the
+ * SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * led_off   | blink_ctrl | SATA active | LED state
+ *           |            |             |
+ *    1      |     x      |      x      |  off
+ *    0      |     0      |      0      |  off
+ *    0      |     1      |      0      |  blink (rate 300ms)
+ *    0      |     x      |      1      |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Red LED have priority.
+ */
+
+#define D2NET_GPIO_RED_LED		6
+#define D2NET_GPIO_BLUE_LED_BLINK_CTRL	16
+#define D2NET_GPIO_BLUE_LED_OFF		23
+
+static struct gpio_led d2net_leds[] = {
+	{
+		.name = "d2net:blue:sata",
+		.default_trigger = "default-on",
+		.gpio = D2NET_GPIO_BLUE_LED_OFF,
+		.active_low = 1,
+	},
+	{
+		.name = "d2net:red:fail",
+		.gpio = D2NET_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data d2net_led_data = {
+	.num_leds = ARRAY_SIZE(d2net_leds),
+	.leds = d2net_leds,
+};
+
+static struct platform_device d2net_gpio_leds = {
+	.name           = "leds-gpio",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &d2net_led_data,
+	},
+};
+
+static void __init d2net_gpio_leds_init(void)
+{
+	int err;
+
+	/* Configure register blink_ctrl to allow SATA activity LED blinking. */
+	err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
+	}
+	if (err)
+		pr_err("d2net: failed to configure blue LED blink GPIO\n");
+
+	platform_device_register(&d2net_gpio_leds);
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+void __init d2net_init(void)
+{
+	d2net_gpio_leds_init();
+
+	pr_notice("d2net: Flash write are not yet supported.\n");
+}
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index c134a826070a..35d418faf8f1 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -15,10 +15,16 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/cpu.h>
+#include <linux/mbus.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
 #include <asm/system_misc.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 #include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
+#include <plat/time.h>
 #include "common.h"
 
 static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = {
@@ -39,14 +45,13 @@ static void __init orion5x_dt_init(void)
 	orion5x_id(&dev, &rev, &dev_name);
 	printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk);
 
+	BUG_ON(mvebu_mbus_dt_init());
+
 	/*
 	 * Setup Orion address map
 	 */
 	orion5x_setup_wins();
 
-	/* Setup root of clk tree */
-	clk_init();
-
 	/*
 	 * Don't issue "Wait for Interrupt" instruction if we are
 	 * running on D0 5281 silicon.
@@ -56,8 +61,8 @@ static void __init orion5x_dt_init(void)
 		cpu_idle_poll_ctrl(true);
 	}
 
-	if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2"))
-		edmini_v2_init();
+	if (of_machine_is_compatible("maxtor,shared-storage-2"))
+		mss2_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     orion5x_auxdata_lookup, NULL);
@@ -71,9 +76,6 @@ static const char *orion5x_dt_compat[] = {
 DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)")
 	/* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */
 	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion_dt_init_irq,
-	.init_time	= orion5x_timer_init,
 	.init_machine	= orion5x_dt_init,
 	.restart	= orion5x_restart,
 	.dt_compat	= orion5x_dt_compat,
diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
new file mode 100644
index 000000000000..66f9c3ba86cc
--- /dev/null
+++ b/arch/arm/mach-orion5x/board-mss2.c
@@ -0,0 +1,90 @@
+/*
+ * Maxtor Shared Storage II Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+/*****************************************************************************
+ * Maxtor Shared Storage II Info
+ ****************************************************************************/
+
+/****************************************************************************
+ * PCI setup
+ ****************************************************************************/
+static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	return -1;
+}
+
+static struct hw_pci mss2_pci __initdata = {
+	.nr_controllers = 2,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= mss2_pci_map_irq,
+};
+
+static int __init mss2_pci_init(void)
+{
+	if (machine_is_mss2())
+		pci_common_init(&mss2_pci);
+
+	return 0;
+}
+subsys_initcall(mss2_pci_init);
+
+/*****************************************************************************
+ * MSS2 power off method
+ ****************************************************************************/
+/*
+ * On the Maxtor Shared Storage II, the shutdown process is the following :
+ * - Userland modifies U-boot env to tell U-boot to go idle at next boot
+ * - The board reboots
+ * - U-boot starts and go into an idle mode until the user press "power"
+ */
+static void mss2_power_off(void)
+{
+	u32 reg;
+
+	/*
+	 * Enable and issue soft reset
+	 */
+	reg = readl(RSTOUTn_MASK);
+	reg |= 1 << 2;
+	writel(reg, RSTOUTn_MASK);
+
+	reg = readl(CPU_SOFT_RESET);
+	reg |= 1;
+	writel(reg, CPU_SOFT_RESET);
+}
+
+void __init mss2_init(void)
+{
+	/* register mss2 specific power-off method */
+	pm_power_off = mss2_power_off;
+}
diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c
new file mode 100644
index 000000000000..270824b0e50f
--- /dev/null
+++ b/arch/arm/mach-orion5x/board-rd88f5182.c
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-orion5x/rd88f5182-setup.c
+ *
+ * Marvell Orion-NAS Reference Design Setup
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+
+/*****************************************************************************
+ * RD-88F5182 Info
+ ****************************************************************************/
+
+/*
+ * PCI
+ */
+
+#define RD88F5182_PCI_SLOT0_OFFS	7
+#define RD88F5182_PCI_SLOT0_IRQ_A_PIN	7
+#define RD88F5182_PCI_SLOT0_IRQ_B_PIN	6
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static void __init rd88f5182_pci_preinit(void)
+{
+	int pin;
+
+	/*
+	 * Configure PCI GPIO IRQ pins
+	 */
+	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
+	if (gpio_request(pin, "PCI IntA") == 0) {
+		if (gpio_direction_input(pin) == 0) {
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+		} else {
+			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
+					"set_irq_type pin %d\n", pin);
+			gpio_free(pin);
+		}
+	} else {
+		printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
+	}
+
+	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
+	if (gpio_request(pin, "PCI IntB") == 0) {
+		if (gpio_direction_input(pin) == 0) {
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+		} else {
+			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
+					"set_irq_type pin %d\n", pin);
+			gpio_free(pin);
+		}
+	} else {
+		printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
+	}
+}
+
+static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
+	u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * PCI IRQs are connected via GPIOs
+	 */
+	switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
+	case 0:
+		if (pin == 1)
+			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
+		else
+			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
+	default:
+		return -1;
+	}
+}
+
+static struct hw_pci rd88f5182_pci __initdata = {
+	.nr_controllers	= 2,
+	.preinit	= rd88f5182_pci_preinit,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= rd88f5182_pci_map_irq,
+};
+
+static int __init rd88f5182_pci_init(void)
+{
+	if (of_machine_is_compatible("marvell,rd-88f5182-nas"))
+		pci_common_init(&rd88f5182_pci);
+
+	return 0;
+}
+
+subsys_initcall(rd88f5182_pci_init);
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 3f1de1111e0f..6bbb7b55c6d1 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -365,8 +365,7 @@ void orion5x_restart(enum reboot_mode mode, const char *cmd)
  * Many orion-based systems have buggy bootloader implementations.
  * This is a common fixup for bogus memory tags.
  */
-void __init tag_fixup_mem32(struct tag *t, char **from,
-			    struct meminfo *meminfo)
+void __init tag_fixup_mem32(struct tag *t, char **from)
 {
 	for (; t->hdr.size; t = tag_next(t))
 		if (t->hdr.tag == ATAG_MEM &&
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index f565f9944af2..cd0389c6e822 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -21,7 +21,7 @@ struct mv_sata_platform_data;
 #define ORION_MBUS_DEVBUS_BOOT_ATTR   0x0f
 #define ORION_MBUS_DEVBUS_TARGET(cs)  0x01
 #define ORION_MBUS_DEVBUS_ATTR(cs)    (~(1 << cs))
-#define ORION_MBUS_SRAM_TARGET        0x00
+#define ORION_MBUS_SRAM_TARGET        0x09
 #define ORION_MBUS_SRAM_ATTR          0x00
 
 /*
@@ -64,17 +64,15 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
 struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
 int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
 
-/* board init functions for boards not fully converted to fdt */
-#ifdef CONFIG_MACH_EDMINI_V2_DT
-void edmini_v2_init(void);
+struct tag;
+extern void __init tag_fixup_mem32(struct tag *, char **);
+
+#ifdef CONFIG_MACH_MSS2_DT
+extern void mss2_init(void);
 #else
-static inline void edmini_v2_init(void) {};
+static inline void mss2_init(void) {}
 #endif
 
-struct meminfo;
-struct tag;
-extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *);
-
 /*****************************************************************************
  * Helpers to access Orion registers
  ****************************************************************************/
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
deleted file mode 100644
index 8f68b745c1d5..000000000000
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- * arch/arm/mach-orion5x/d2net-setup.c
- *
- * LaCie d2Network and Big Disk Network NAS setup
- *
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <plat/orion-gpio.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * LaCie d2 Network Info
- ****************************************************************************/
-
-/*
- * 512KB NOR flash Device bus boot chip select
- */
-
-#define D2NET_NOR_BOOT_BASE		0xfff80000
-#define D2NET_NOR_BOOT_SIZE		SZ_512K
-
-/*****************************************************************************
- * 512KB NOR Flash on Boot Device
- ****************************************************************************/
-
-/*
- * TODO: Check write support on flash MX29LV400CBTC-70G
- */
-
-static struct mtd_partition d2net_partitions[] = {
-	{
-		.name		= "Full512kb",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data d2net_nor_flash_data = {
-	.width		= 1,
-	.parts		= d2net_partitions,
-	.nr_parts	= ARRAY_SIZE(d2net_partitions),
-};
-
-static struct resource d2net_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= D2NET_NOR_BOOT_BASE,
-	.end			= D2NET_NOR_BOOT_BASE
-					+ D2NET_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device d2net_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &d2net_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &d2net_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data d2net_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-/*
- * i2c addr | chip         | description
- * 0x32     | Ricoh 5C372b | RTC
- * 0x3e     | GMT G762     | PWM fan controller
- * 0x50     | HT24LC08     | eeprom (1kB)
- *
- * TODO: Add G762 support to the g760a driver.
- */
-static struct i2c_board_info __initdata d2net_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372b", 0x32),
-	}, {
-		I2C_BOARD_INFO("24c08", 0x50),
-	},
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data d2net_sata_data = {
-	.n_ports	= 2,
-};
-
-#define D2NET_GPIO_SATA0_POWER	3
-#define D2NET_GPIO_SATA1_POWER	12
-
-static void __init d2net_sata_power_init(void)
-{
-	int err;
-
-	err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");
-	if (err == 0) {
-		err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);
-		if (err)
-			gpio_free(D2NET_GPIO_SATA0_POWER);
-	}
-	if (err)
-		pr_err("d2net: failed to configure SATA0 power GPIO\n");
-
-	err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");
-	if (err == 0) {
-		err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);
-		if (err)
-			gpio_free(D2NET_GPIO_SATA1_POWER);
-	}
-	if (err)
-		pr_err("d2net: failed to configure SATA1 power GPIO\n");
-}
-
-/*****************************************************************************
- * GPIO LED's
- ****************************************************************************/
-
-/*
- * The blue front LED is wired to the CPLD and can blink in relation with the
- * SATA activity.
- *
- * The following array detail the different LED registers and the combination
- * of their possible values:
- *
- * led_off   | blink_ctrl | SATA active | LED state
- *           |            |             |
- *    1      |     x      |      x      |  off
- *    0      |     0      |      0      |  off
- *    0      |     1      |      0      |  blink (rate 300ms)
- *    0      |     x      |      1      |  on
- *
- * Notes: The blue and the red front LED's can't be on at the same time.
- *        Red LED have priority.
- */
-
-#define D2NET_GPIO_RED_LED		6
-#define D2NET_GPIO_BLUE_LED_BLINK_CTRL	16
-#define D2NET_GPIO_BLUE_LED_OFF		23
-
-static struct gpio_led d2net_leds[] = {
-	{
-		.name = "d2net:blue:sata",
-		.default_trigger = "default-on",
-		.gpio = D2NET_GPIO_BLUE_LED_OFF,
-		.active_low = 1,
-	},
-	{
-		.name = "d2net:red:fail",
-		.gpio = D2NET_GPIO_RED_LED,
-	},
-};
-
-static struct gpio_led_platform_data d2net_led_data = {
-	.num_leds = ARRAY_SIZE(d2net_leds),
-	.leds = d2net_leds,
-};
-
-static struct platform_device d2net_gpio_leds = {
-	.name           = "leds-gpio",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &d2net_led_data,
-	},
-};
-
-static void __init d2net_gpio_leds_init(void)
-{
-	int err;
-
-	/* Configure GPIO over MPP max number. */
-	orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
-
-	/* Configure register blink_ctrl to allow SATA activity LED blinking. */
-	err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
-	if (err == 0) {
-		err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
-		if (err)
-			gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
-	}
-	if (err)
-		pr_err("d2net: failed to configure blue LED blink GPIO\n");
-
-	platform_device_register(&d2net_gpio_leds);
-}
-
-/****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define D2NET_GPIO_PUSH_BUTTON		18
-#define D2NET_GPIO_POWER_SWITCH_ON	8
-#define D2NET_GPIO_POWER_SWITCH_OFF	9
-
-#define D2NET_SWITCH_POWER_ON		0x1
-#define D2NET_SWITCH_POWER_OFF		0x2
-
-static struct gpio_keys_button d2net_buttons[] = {
-	{
-		.type		= EV_SW,
-		.code		= D2NET_SWITCH_POWER_OFF,
-		.gpio		= D2NET_GPIO_POWER_SWITCH_OFF,
-		.desc		= "Power rocker switch (auto|off)",
-		.active_low	= 0,
-	},
-	{
-		.type		= EV_SW,
-		.code		= D2NET_SWITCH_POWER_ON,
-		.gpio		= D2NET_GPIO_POWER_SWITCH_ON,
-		.desc		= "Power rocker switch (on|auto)",
-		.active_low	= 0,
-	},
-	{
-		.type		= EV_KEY,
-		.code		= KEY_POWER,
-		.gpio		= D2NET_GPIO_PUSH_BUTTON,
-		.desc		= "Front Push Button",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data d2net_button_data = {
-	.buttons	= d2net_buttons,
-	.nbuttons	= ARRAY_SIZE(d2net_buttons),
-};
-
-static struct platform_device d2net_gpio_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &d2net_button_data,
-	},
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int d2net_mpp_modes[] __initdata = {
-	MPP0_GPIO,	/* Board ID (bit 0) */
-	MPP1_GPIO,	/* Board ID (bit 1) */
-	MPP2_GPIO,	/* Board ID (bit 2) */
-	MPP3_GPIO,	/* SATA 0 power */
-	MPP4_UNUSED,
-	MPP5_GPIO,	/* Fan fail detection */
-	MPP6_GPIO,	/* Red front LED */
-	MPP7_UNUSED,
-	MPP8_GPIO,	/* Rear power switch (on|auto) */
-	MPP9_GPIO,	/* Rear power switch (auto|off) */
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_GPIO,	/* SATA 1 power */
-	MPP13_UNUSED,
-	MPP14_SATA_LED,	/* SATA 0 active */
-	MPP15_SATA_LED,	/* SATA 1 active */
-	MPP16_GPIO,	/* Blue front LED blink control */
-	MPP17_UNUSED,
-	MPP18_GPIO,	/* Front button (0 = Released, 1 = Pushed ) */
-	MPP19_UNUSED,
-	0,
-	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
-	/* 23: Blue front LED off */
-	/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
-};
-
-#define D2NET_GPIO_INHIBIT_POWER_OFF    24
-
-static void __init d2net_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(d2net_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&d2net_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-
-	d2net_sata_power_init();
-	orion5x_sata_init(&d2net_sata_data);
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    D2NET_NOR_BOOT_BASE,
-				    D2NET_NOR_BOOT_SIZE);
-	platform_device_register(&d2net_nor_flash);
-
-	platform_device_register(&d2net_gpio_buttons);
-
-	d2net_gpio_leds_init();
-
-	pr_notice("d2net: Flash write are not yet supported.\n");
-
-	i2c_register_board_info(0, d2net_i2c_devices,
-				ARRAY_SIZE(d2net_i2c_devices));
-
-	orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);
-}
-
-/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
-
-#ifdef CONFIG_MACH_D2NET
-MACHINE_START(D2NET, "LaCie d2 Network")
-	.atag_offset	= 0x100,
-	.init_machine	= d2net_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_BIGDISK
-MACHINE_START(BIGDISK, "LaCie Big Disk Network")
-	.atag_offset	= 0x100,
-	.init_machine	= d2net_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
-#endif
-
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 70974732cbf0..56edeab17b68 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -642,6 +642,8 @@ static void __init dns323_init(void)
 		platform_device_register_simple("dns323c-fan", 0, NULL, 0);
 
 		/* Register fixup for the PHY LEDs */
+		if (!IS_BUILTIN(CONFIG_PHYLIB))
+			break;
 		phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118,
 					   MARVELL_PHY_ID_MASK,
 					   dns323c_phy_fixup);
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
deleted file mode 100644
index f66c1b2ee8c1..000000000000
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * arch/arm/mach-orion5x/edmini_v2-setup.c
- *
- * LaCie Ethernet Disk mini V2 Setup
- *
- * Copyright (C) 2008 Christopher Moore <moore@free.fr>
- * Copyright (C) 2008 Albert Aribaud <albert.aribaud@free.fr>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * TODO: add Orion USB device port init when kernel.org support is added.
- * TODO: add flash write support: see below.
- * TODO: add power-off support.
- * TODO: add I2C EEPROM support.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mbus.h>
-#include <linux/mtd/physmap.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * EDMINI_V2 Info
- ****************************************************************************/
-
-/*
- * 512KB NOR flash Device bus boot chip select
- */
-
-#define EDMINI_V2_NOR_BOOT_BASE		0xfff80000
-#define EDMINI_V2_NOR_BOOT_SIZE		SZ_512K
-
-/*****************************************************************************
- * 512KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-/*
- * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom
- * -type device. This could cause risks of accidentally erasing critical
- * flash sectors. We thus define a single, write-protected partition covering
- * the whole flash.
- * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD
- * code, break this into at least three partitions: 'u-boot code', 'u-boot
- * environment' and 'whatever is left'.
- */
-
-static struct mtd_partition edmini_v2_partitions[] = {
-	{
-		.name		= "Full512kb",
-		.size		= 0x00080000,
-		.offset		= 0x00000000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data edmini_v2_nor_flash_data = {
-	.width		= 1,
-	.parts		= edmini_v2_partitions,
-	.nr_parts	= ARRAY_SIZE(edmini_v2_partitions),
-};
-
-static struct resource edmini_v2_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= EDMINI_V2_NOR_BOOT_BASE,
-	.end			= EDMINI_V2_NOR_BOOT_BASE
-		+ EDMINI_V2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device edmini_v2_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &edmini_v2_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &edmini_v2_nor_flash_resource,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-#define EDMINIV2_RTC_GPIO	3
-
-static struct i2c_board_info __initdata edmini_v2_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-	.irq = 0,
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int edminiv2_mpp_modes[] __initdata = {
-	MPP0_UNUSED,
-	MPP1_UNUSED,
-	MPP2_UNUSED,
-	MPP3_GPIO,	/* RTC interrupt */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_UNUSED,
-	MPP7_UNUSED,
-	MPP8_UNUSED,
-	MPP9_UNUSED,
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_SATA_LED,	/* SATA 0 presence */
-	MPP13_SATA_LED,	/* SATA 1 presence */
-	MPP14_SATA_LED,	/* SATA 0 active */
-	MPP15_SATA_LED,	/* SATA 1 active */
-	/* 16: Power LED control (0 = On, 1 = Off) */
-	MPP16_GPIO,
-	/* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */
-	MPP17_GPIO,
-	/* 18: Power button status (0 = Released, 1 = Pressed) */
-	MPP18_GPIO,
-	MPP19_UNUSED,
-	0,
-};
-
-void __init edmini_v2_init(void)
-{
-	orion5x_mpp_conf(edminiv2_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    EDMINI_V2_NOR_BOOT_BASE,
-				    EDMINI_V2_NOR_BOOT_SIZE);
-	platform_device_register(&edmini_v2_nor_flash);
-
-	pr_notice("edmini_v2: USB device port, flash write and power-off "
-		  "are not yet supported.\n");
-
-	/* Get RTC IRQ and register the chip */
-	if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) {
-		if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0)
-			edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO);
-		else
-			gpio_free(EDMINIV2_RTC_GPIO);
-	}
-
-	if (edmini_v2_i2c_rtc.irq == 0)
-		pr_warning("edmini_v2: failed to get RTC IRQ\n");
-
-	i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1);
-}
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index f727d03f1688..5766e3fbff69 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -18,6 +18,7 @@
 #define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE + 0x104)
 
 #define RSTOUTn_MASK		(ORION5X_BRIDGE_VIRT_BASE + 0x108)
+#define RSTOUTn_MASK_PHYS	(ORION5X_BRIDGE_PHYS_BASE + 0x108)
 
 #define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE + 0x10c)
 
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 9654b0cc5892..cd4bac4d7e43 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -16,6 +16,7 @@
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
+#include <asm/exception.h>
 #include "common.h"
 
 static int __initdata gpio0_irqs[4] = {
@@ -25,10 +26,37 @@ static int __initdata gpio0_irqs[4] = {
 	IRQ_ORION5X_GPIO_24_31,
 };
 
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Compiling with both non-DT and DT support enabled, will
+ * break asm irq handler used by non-DT boards. Therefore,
+ * we provide a C-style irq handler even for non-DT boards,
+ * if MULTI_IRQ_HANDLER is set.
+ */
+
+asmlinkage void
+__exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
+{
+	u32 stat;
+
+	stat = readl_relaxed(MAIN_IRQ_CAUSE);
+	stat &= readl_relaxed(MAIN_IRQ_MASK);
+	if (stat) {
+		unsigned int hwirq = __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+}
+#endif
+
 void __init orion5x_init_irq(void)
 {
 	orion_irq_init(0, MAIN_IRQ_MASK);
 
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+	set_handle_irq(orion5x_legacy_handle_irq);
+#endif
+
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.
 	 */
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
deleted file mode 100644
index e105130ba51c..000000000000
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * Maxtor Shared Storage II Board Setup
- *
- * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-#include "mpp.h"
-
-#define MSS2_NOR_BOOT_BASE	0xff800000
-#define MSS2_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * Maxtor Shared Storage II Info
- ****************************************************************************/
-
-/*
- * Maxtor Shared Storage II hardware :
- * - Marvell 88F5182-A2 C500
- * - Marvell 88E1111 Gigabit Ethernet PHY
- * - RTC M41T81 (@0x68) on I2C bus
- * - 256KB NOR flash
- * - 64MB of RAM
- */
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data mss2_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource mss2_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= MSS2_NOR_BOOT_BASE,
-	.end		= MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device mss2_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &mss2_nor_flash_data,
-	},
-	.resource	= &mss2_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-/****************************************************************************
- * PCI setup
- ****************************************************************************/
-static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	return -1;
-}
-
-static struct hw_pci mss2_pci __initdata = {
-	.nr_controllers = 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= mss2_pci_map_irq,
-};
-
-static int __init mss2_pci_init(void)
-{
-	if (machine_is_mss2())
-		pci_common_init(&mss2_pci);
-
-	return 0;
-}
-subsys_initcall(mss2_pci_init);
-
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data mss2_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data mss2_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * GPIO buttons
- ****************************************************************************/
-
-#define MSS2_GPIO_KEY_RESET	12
-#define MSS2_GPIO_KEY_POWER	11
-
-static struct gpio_keys_button mss2_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= MSS2_GPIO_KEY_POWER,
-		.desc		= "Power",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_RESTART,
-		.gpio		= MSS2_GPIO_KEY_RESET,
-		.desc		= "Reset",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mss2_button_data = {
-	.buttons	= mss2_buttons,
-	.nbuttons	= ARRAY_SIZE(mss2_buttons),
-};
-
-static struct platform_device mss2_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mss2_button_data,
-	},
-};
-
-/*****************************************************************************
- * RTC m41t81 on I2C bus
- ****************************************************************************/
-
-#define MSS2_GPIO_RTC_IRQ	3
-
-static struct i2c_board_info __initdata mss2_i2c_rtc = {
-	I2C_BOARD_INFO("m41t81", 0x68),
-};
-
-/*****************************************************************************
- * MSS2 power off method
- ****************************************************************************/
-/*
- * On the Maxtor Shared Storage II, the shutdown process is the following :
- * - Userland modifies U-boot env to tell U-boot to go idle at next boot
- * - The board reboots
- * - U-boot starts and go into an idle mode until the user press "power"
- */
-static void mss2_power_off(void)
-{
-	u32 reg;
-
-	/*
-	 * Enable and issue soft reset
-	 */
-	reg = readl(RSTOUTn_MASK);
-	reg |= 1 << 2;
-	writel(reg, RSTOUTn_MASK);
-
-	reg = readl(CPU_SOFT_RESET);
-	reg |= 1;
-	writel(reg, CPU_SOFT_RESET);
-}
-
-/****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int mss2_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Power LED */
-	MPP1_GPIO,		/* Error LED */
-	MPP2_UNUSED,
-	MPP3_GPIO,		/* RTC interrupt */
-	MPP4_GPIO,		/* HDD ind. (Single/Dual)*/
-	MPP5_GPIO,		/* HD0 5V control */
-	MPP6_GPIO,		/* HD0 12V control */
-	MPP7_GPIO,		/* HD1 5V control */
-	MPP8_GPIO,		/* HD1 12V control */
-	MPP9_UNUSED,
-	MPP10_GPIO,		/* Fan control */
-	MPP11_GPIO,		/* Power button */
-	MPP12_GPIO,		/* Reset button */
-	MPP13_UNUSED,
-	MPP14_SATA_LED,		/* SATA 0 active */
-	MPP15_SATA_LED,		/* SATA 1 active */
-	MPP16_UNUSED,
-	MPP17_UNUSED,
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init mss2_init(void)
-{
-	/* Setup basic Orion functions. Need to be called early. */
-	orion5x_init();
-
-	orion5x_mpp_conf(mss2_mpp_modes);
-
-	/*
-	 * MPP[20] Unused
-	 * MPP[21] PCI clock
-	 * MPP[22] USB 0 over current
-	 * MPP[23] USB 1 over current
-	 */
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&mss2_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&mss2_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    MSS2_NOR_BOOT_BASE,
-				    MSS2_NOR_BOOT_SIZE);
-	platform_device_register(&mss2_nor_flash);
-
-	platform_device_register(&mss2_button_device);
-
-	if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) {
-		if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0)
-			mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ);
-		else
-			gpio_free(MSS2_GPIO_RTC_IRQ);
-	}
-	i2c_register_board_info(0, &mss2_i2c_rtc, 1);
-
-	/* register mss2 specific power-off method */
-	pm_power_off = mss2_power_off;
-}
-
-MACHINE_START(MSS2, "Maxtor Shared Storage II")
-	/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= mss2_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig
index b1022f4315f7..62240f69b4ee 100644
--- a/arch/arm/mach-picoxcell/Kconfig
+++ b/arch/arm/mach-picoxcell/Kconfig
@@ -1,12 +1,7 @@
 config ARCH_PICOXCELL
 	bool "Picochip PicoXcell" if ARCH_MULTI_V6
 	select ARCH_REQUIRE_GPIOLIB
-	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
-	select CPU_V6K
 	select DW_APB_TIMER_OF
-	select GENERIC_CLOCKEVENTS
 	select HAVE_TCM
-	select NO_IOPORT
-	select SPARSE_IRQ
-	select USE_OF
+	select NO_IOPORT_MAP
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 6988b117fc17..e4e505f52ba0 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -1,10 +1,9 @@
 config ARCH_SIRF
 	bool "CSR SiRF" if ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select MIGHT_HAVE_CACHE_L2X0
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select PINCTRL
 	select PINCTRL_SIRF
 	help
@@ -17,7 +16,6 @@ menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
 config ARCH_ATLAS6
 	bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform"
 	default y
-	select CPU_V7
 	select SIRF_IRQ
 	help
           Support for CSR SiRFSoC ARM Cortex A9 Platform
@@ -25,7 +23,6 @@ config ARCH_ATLAS6
 config ARCH_PRIMA2
 	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
 	default y
-	select CPU_V7
 	select SIRF_IRQ
 	select ZONE_DMA
 	help
@@ -35,9 +32,7 @@ config ARCH_MARCO
 	bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform"
 	default y
 	select ARM_GIC
-	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_SMP
 	select SMP_ON_UP if SMP
 	help
           Support for CSR SiRFSoC ARM Cortex A9 Platform
diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile
index 7a6b4a323125..8846e7d87ea5 100644
--- a/arch/arm/mach-prima2/Makefile
+++ b/arch/arm/mach-prima2/Makefile
@@ -2,7 +2,6 @@ obj-y += rstc.o
 obj-y += common.o
 obj-y += rtciobrg.o
 obj-$(CONFIG_DEBUG_LL) += lluart.o
-obj-$(CONFIG_CACHE_L2X0) += l2x0.o
 obj-$(CONFIG_SUSPEND) += pm.o sleep.o
 obj-$(CONFIG_SMP) += platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)  += hotplug.o
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index d49aff74de98..a860ea27e8ae 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -15,7 +15,7 @@
 #include <linux/of_platform.h>
 #include "common.h"
 
-void __init sirfsoc_init_late(void)
+static void __init sirfsoc_init_late(void)
 {
 	sirfsoc_pm_init();
 }
@@ -27,48 +27,51 @@ static __init void sirfsoc_map_io(void)
 }
 
 #ifdef CONFIG_ARCH_ATLAS6
-static const char *atlas6_dt_match[] __initdata = {
+static const char *atlas6_dt_match[] __initconst = {
 	"sirf,atlas6",
 	NULL
 };
 
 DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
 	.map_io         = sirfsoc_map_io,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = atlas6_dt_match,
-	.restart	= sirfsoc_restart,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_ARCH_PRIMA2
-static const char *prima2_dt_match[] __initdata = {
+static const char *prima2_dt_match[] __initconst = {
 	"sirf,prima2",
 	NULL
 };
 
 DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
 	.map_io         = sirfsoc_map_io,
 	.dma_zone_size	= SZ_256M,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = prima2_dt_match,
-	.restart	= sirfsoc_restart,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_ARCH_MARCO
-static const char *marco_dt_match[] __initdata = {
+static const char *marco_dt_match[] __initconst = {
 	"sirf,marco",
 	NULL
 };
 
 DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
 	.smp            = smp_ops(sirfsoc_smp_ops),
 	.map_io         = sirfsoc_map_io,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = marco_dt_match,
-	.restart	= sirfsoc_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index 4b768060a858..07d3e5ed9264 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -23,7 +23,6 @@ extern void sirfsoc_secondary_startup(void);
 extern void sirfsoc_cpu_die(unsigned int cpu);
 
 extern void __init sirfsoc_of_irq_init(void);
-extern void sirfsoc_restart(enum reboot_mode, const char *);
 extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs);
 
 #ifndef CONFIG_DEBUG_LL
diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c
deleted file mode 100644
index cbcbe9cb094c..000000000000
--- a/arch/arm/mach-prima2/l2x0.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * l2 cache initialization for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <asm/hardware/cache-l2x0.h>
-
-struct l2x0_aux
-{
-	u32 val;
-	u32 mask;
-};
-
-static struct l2x0_aux prima2_l2x0_aux __initconst = {
-	.val = 2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT,
-	.mask =	0,
-};
-
-static struct l2x0_aux marco_l2x0_aux __initconst = {
-	.val = (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) |
-		(1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT),
-	.mask = L2X0_AUX_CTRL_MASK,
-};
-
-static struct of_device_id sirf_l2x0_ids[] __initconst = {
-	{ .compatible = "sirf,prima2-pl310-cache", .data = &prima2_l2x0_aux, },
-	{ .compatible = "sirf,marco-pl310-cache", .data = &marco_l2x0_aux, },
-	{},
-};
-
-static int __init sirfsoc_l2x0_init(void)
-{
-	struct device_node *np;
-	const struct l2x0_aux *aux;
-
-	np = of_find_matching_node(NULL, sirf_l2x0_ids);
-	if (np) {
-		aux = of_match_node(sirf_l2x0_ids, np)->data;
-		return l2x0_of_init(aux->val, aux->mask);
-	}
-
-	return 0;
-}
-early_initcall(sirfsoc_l2x0_init);
diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c
index e358b0736dea..335c12e92262 100644
--- a/arch/arm/mach-prima2/platsmp.c
+++ b/arch/arm/mach-prima2/platsmp.c
@@ -138,9 +138,9 @@ static void __init sirfsoc_smp_prepare_cpus(unsigned int max_cpus)
 }
 
 struct smp_operations sirfsoc_smp_ops __initdata = {
-        .smp_prepare_cpus       = sirfsoc_smp_prepare_cpus,
-        .smp_secondary_init     = sirfsoc_secondary_init,
-        .smp_boot_secondary     = sirfsoc_boot_secondary,
+	.smp_prepare_cpus       = sirfsoc_smp_prepare_cpus,
+	.smp_secondary_init     = sirfsoc_secondary_init,
+	.smp_boot_secondary     = sirfsoc_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die                = sirfsoc_cpu_die,
 #endif
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index c4525a88e5da..96e9bc102117 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -71,7 +71,6 @@ static int sirfsoc_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		sirfsoc_pre_suspend_power_off();
 
-		outer_flush_all();
 		outer_disable();
 		/* go zzz */
 		cpu_suspend(0, sirfsoc_finish_suspend);
diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c
index ccb53391147a..3dffcb2d714e 100644
--- a/arch/arm/mach-prima2/rstc.c
+++ b/arch/arm/mach-prima2/rstc.c
@@ -13,69 +13,56 @@
 #include <linux/device.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/platform_device.h>
 #include <linux/reboot.h>
+#include <linux/reset-controller.h>
 
-void __iomem *sirfsoc_rstc_base;
-static DEFINE_MUTEX(rstc_lock);
-
-static struct of_device_id rstc_ids[]  = {
-	{ .compatible = "sirf,prima2-rstc" },
-	{ .compatible = "sirf,marco-rstc" },
-	{},
-};
+#include <asm/system_misc.h>
 
-static int __init sirfsoc_of_rstc_init(void)
-{
-	struct device_node *np;
+#define SIRFSOC_RSTBIT_NUM	64
 
-	np = of_find_matching_node(NULL, rstc_ids);
-	if (!np) {
-		pr_err("unable to find compatible sirf rstc node in dtb\n");
-		return -ENOENT;
-	}
-
-	sirfsoc_rstc_base = of_iomap(np, 0);
-	if (!sirfsoc_rstc_base)
-		panic("unable to map rstc cpu registers\n");
-
-	of_node_put(np);
-
-	return 0;
-}
-early_initcall(sirfsoc_of_rstc_init);
+static void __iomem *sirfsoc_rstc_base;
+static DEFINE_MUTEX(rstc_lock);
 
-int sirfsoc_reset_device(struct device *dev)
+static int sirfsoc_reset_module(struct reset_controller_dev *rcdev,
+					unsigned long sw_reset_idx)
 {
-	u32 reset_bit;
+	u32 reset_bit = sw_reset_idx;
 
-	if (of_property_read_u32(dev->of_node, "reset-bit", &reset_bit))
+	if (reset_bit >= SIRFSOC_RSTBIT_NUM)
 		return -EINVAL;
 
 	mutex_lock(&rstc_lock);
 
-	if (of_device_is_compatible(dev->of_node, "sirf,prima2-rstc")) {
+	if (of_device_is_compatible(rcdev->of_node, "sirf,prima2-rstc")) {
 		/*
-		 * Writing 1 to this bit resets corresponding block. Writing 0 to this
-		 * bit de-asserts reset signal of the corresponding block.
-		 * datasheet doesn't require explicit delay between the set and clear
-		 * of reset bit. it could be shorter if tests pass.
+		 * Writing 1 to this bit resets corresponding block.
+		 * Writing 0 to this bit de-asserts reset signal of the
+		 * corresponding block. datasheet doesn't require explicit
+		 * delay between the set and clear of reset bit. it could
+		 * be shorter if tests pass.
 		 */
-		writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit,
+		writel(readl(sirfsoc_rstc_base +
+			(reset_bit / 32) * 4) | (1 << reset_bit),
 			sirfsoc_rstc_base + (reset_bit / 32) * 4);
-		msleep(10);
-		writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit,
+		msleep(20);
+		writel(readl(sirfsoc_rstc_base +
+			(reset_bit / 32) * 4) & ~(1 << reset_bit),
 			sirfsoc_rstc_base + (reset_bit / 32) * 4);
 	} else {
 		/*
 		 * For MARCO and POLO
-		 * Writing 1 to SET register resets corresponding block. Writing 1 to CLEAR
-		 * register de-asserts reset signal of the corresponding block.
-		 * datasheet doesn't require explicit delay between the set and clear
-		 * of reset bit. it could be shorter if tests pass.
+		 * Writing 1 to SET register resets corresponding block.
+		 * Writing 1 to CLEAR register de-asserts reset signal of the
+		 * corresponding block.
+		 * datasheet doesn't require explicit delay between the set and
+		 * clear of reset bit. it could be shorter if tests pass.
 		 */
-		writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8);
-		msleep(10);
-		writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4);
+		writel(1 << reset_bit,
+			sirfsoc_rstc_base + (reset_bit / 32) * 8);
+		msleep(20);
+		writel(1 << reset_bit,
+			sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4);
 	}
 
 	mutex_unlock(&rstc_lock);
@@ -83,9 +70,57 @@ int sirfsoc_reset_device(struct device *dev)
 	return 0;
 }
 
+static struct reset_control_ops sirfsoc_rstc_ops = {
+	.reset = sirfsoc_reset_module,
+};
+
+static struct reset_controller_dev sirfsoc_reset_controller = {
+	.ops = &sirfsoc_rstc_ops,
+	.nr_resets = SIRFSOC_RSTBIT_NUM,
+};
+
 #define SIRFSOC_SYS_RST_BIT  BIT(31)
 
-void sirfsoc_restart(enum reboot_mode mode, const char *cmd)
+static void sirfsoc_restart(enum reboot_mode mode, const char *cmd)
 {
 	writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base);
 }
+
+static int sirfsoc_rstc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	sirfsoc_rstc_base = of_iomap(np, 0);
+	if (!sirfsoc_rstc_base) {
+		dev_err(&pdev->dev, "unable to map rstc cpu registers\n");
+		return -ENOMEM;
+	}
+
+	sirfsoc_reset_controller.of_node = np;
+	arm_pm_restart = sirfsoc_restart;
+
+	if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
+		reset_controller_register(&sirfsoc_reset_controller);
+
+	return 0;
+}
+
+static const struct of_device_id rstc_ids[]  = {
+	{ .compatible = "sirf,prima2-rstc" },
+	{ .compatible = "sirf,marco-rstc" },
+	{},
+};
+
+static struct platform_driver sirfsoc_rstc_driver = {
+	.probe		= sirfsoc_rstc_probe,
+	.driver		= {
+		.name	= "sirfsoc_rstc",
+		.owner	= THIS_MODULE,
+		.of_match_table = rstc_ids,
+	},
+};
+
+static int __init sirfsoc_rstc_init(void)
+{
+	return platform_driver_register(&sirfsoc_rstc_driver);
+}
+subsys_initcall(sirfsoc_rstc_init);
diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c
index 9f2da2eec4dc..a17c88b74fa1 100644
--- a/arch/arm/mach-prima2/rtciobrg.c
+++ b/arch/arm/mach-prima2/rtciobrg.c
@@ -137,4 +137,4 @@ postcore_initcall(sirfsoc_rtciobrg_init);
 MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>, "
 		"Barry Song <baohua.song@csr.com>");
 MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 96100dbf5a2e..e6690a44917d 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -7,7 +7,6 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 config MACH_PXA3XX_DT
 	bool "Support PXA3xx platforms from device tree"
 	select CPU_PXA300
-	select HAVE_PWM
 	select POWER_SUPPLY
 	select PXA3xx
 	select USE_OF
@@ -23,12 +22,10 @@ config ARCH_LUBBOCK
 
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
-	select HAVE_PWM
 	select PXA27x
 
 config MACH_ZYLONITE
 	bool
-	select HAVE_PWM
 	select PXA3xx
 
 config MACH_ZYLONITE300
@@ -53,12 +50,16 @@ config MACH_TAVOREVB
 	select CPU_PXA930
 	select CPU_PXA935
 	select PXA3xx
+	select FB
+	select FB_PXA
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
 	select CPU_PXA930
 	select CPU_PXA935
 	select PXA3xx
+	select FB
+	select FB_PXA
 
 comment "Third Party Dev Platforms (sorted by vendor name)"
 
@@ -69,8 +70,7 @@ config ARCH_PXA_IDP
 config ARCH_VIPER
 	bool "Arcom/Eurotech VIPER SBC"
 	select ARCOM_PCMCIA
-	select HAVE_PWM
-	select I2C_GPIO
+	select I2C_GPIO if I2C=y
 	select ISA
 	select PXA25x
 	select PXA_HAVE_ISA_IRQS
@@ -120,7 +120,6 @@ config MACH_CM_X300
 	bool "CompuLab CM-X300 modules"
 	select CPU_PXA300
 	select CPU_PXA310
-	select HAVE_PWM
 	select PXA3xx
 
 config MACH_CAPC7117
@@ -164,7 +163,6 @@ config MACH_XCEP
 	select MTD_CFI_INTELEXT
 	select MTD_PHYSMAP
 	select PXA25x
-	select SMC91X
 	help
 	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
 	  Tuned for usage in Libera instruments for particle accelerators.
@@ -181,6 +179,7 @@ config MACH_TRIZEPS4
 config MACH_TRIZEPS4WL
 	bool "Keith und Koep Trizeps4-WL DIMM-Module"
 	depends on TRIZEPS_PXA
+	select MACH_TRIZEPS4
 	select PXA27x
 	select TRIZEPS_PCMCIA
 
@@ -211,7 +210,6 @@ config TRIZEPS_PCMCIA
 
 config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
-	select HAVE_PWM
 	select PXA27x
 
 config MACH_PCM027
@@ -222,7 +220,6 @@ config MACH_PCM027
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
 	depends on MACH_PCM027
-	select HAVE_PWM
 
 choice
 	prompt "display on pcm990"
@@ -246,7 +243,6 @@ config MACH_COLIBRI
 config MACH_COLIBRI_PXA270_INCOME
 	bool "Income s.r.o. PXA270 SBC"
 	depends on MACH_COLIBRI
-	select HAVE_PWM
 	select PXA27x
 
 config MACH_COLIBRI300
@@ -275,7 +271,6 @@ comment "End-user Products (sorted by vendor name)"
 
 config MACH_H4700
 	bool "HP iPAQ hx4700"
-	select HAVE_PWM
 	select IWMMXT
 	select PXA27x
 
@@ -289,14 +284,12 @@ config MACH_HIMALAYA
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
-	select HAVE_PWM
 	select IWMMXT
 	select PXA27x
 
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
 	select GPIO_SYSFS
-	select HAVE_PWM
 	select IWMMXT
 	select PXA27x
 	help
@@ -306,7 +299,6 @@ config MACH_MIOA701
 
 config PXA_EZX
 	bool "Motorola EZX Platform"
-	select HAVE_PWM
 	select IWMMXT
 	select PXA27x
 
@@ -346,7 +338,6 @@ config MACH_MP900C
 
 config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
-	select HAVE_PWM
 
 config MACH_PALM27X
 	bool
@@ -444,7 +435,6 @@ config MACH_TREO680
 config MACH_RAUMFELD_RC
 	bool "Raumfeld Controller"
 	select CPU_PXA300
-	select HAVE_PWM
 	select POWER_SUPPLY
 	select PXA3xx
 
@@ -608,7 +598,6 @@ config MACH_E800
 
 config MACH_ZIPIT2
 	bool "Zipit Z2 Handheld"
-	select HAVE_PWM
 	select PXA27x
 endmenu
 
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 2f71b3fbd319..43596e0ed051 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -331,7 +331,6 @@ static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
 static void __init balloon3_udc_init(void)
 {
 	pxa_set_udc_info(&balloon3_udc_info);
-	platform_device_register(&balloon3_gpio_vbus);
 }
 #else
 static inline void balloon3_udc_init(void) {}
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 584439bfa59f..4d3588d26c2a 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -837,8 +837,7 @@ static void __init cm_x300_init(void)
 	cm_x300_init_bl();
 }
 
-static void __init cm_x300_fixup(struct tag *tags, char **cmdline,
-				 struct meminfo *mi)
+static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
 {
 	/* Make sure that mi->bank[0].start = PHYS_ADDR */
 	for (; tags->hdr.size; tags = tag_next(tags))
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 8404b24240ea..638b0bb88426 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -20,6 +20,7 @@
 #include <asm/mach/arch.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <asm/io.h>
 
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index f162f1b77cd2..91dd1c7cdbcd 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -32,7 +32,9 @@
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/gpio_keys.h>
 #include <linux/module.h>
+#include <linux/memblock.h>
 #include <video/w100fb.h>
 
 #include <asm/setup.h>
@@ -405,6 +407,44 @@ static struct platform_device corgikbd_device = {
 	},
 };
 
+static struct gpio_keys_button corgi_gpio_keys[] = {
+	{
+		.type	= EV_SW,
+		.code	= SW_LID,
+		.gpio	= CORGI_GPIO_SWA,
+		.desc	= "Lid close switch",
+		.debounce_interval = 500,
+	},
+	{
+		.type	= EV_SW,
+		.code	= SW_TABLET_MODE,
+		.gpio	= CORGI_GPIO_SWB,
+		.desc	= "Tablet mode switch",
+		.debounce_interval = 500,
+	},
+	{
+		.type	= EV_SW,
+		.code	= SW_HEADPHONE_INSERT,
+		.gpio	= CORGI_GPIO_AK_INT,
+		.desc	= "HeadPhone insert",
+		.debounce_interval = 500,
+	},
+};
+
+static struct gpio_keys_platform_data corgi_gpio_keys_platform_data = {
+	.buttons	= corgi_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(corgi_gpio_keys),
+	.poll_interval	= 250,
+};
+
+static struct platform_device corgi_gpio_keys_device = {
+	.name	= "gpio-keys-polled",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &corgi_gpio_keys_platform_data,
+	},
+};
+
 /*
  * Corgi LEDs
  */
@@ -646,6 +686,7 @@ static struct platform_device sharpsl_rom_device = {
 static struct platform_device *devices[] __initdata = {
 	&corgiscoop_device,
 	&corgifb_device,
+	&corgi_gpio_keys_device,
 	&corgikbd_device,
 	&corgiled_device,
 	&corgi_audio_device,
@@ -713,16 +754,13 @@ static void __init corgi_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
-static void __init fixup_corgi(struct tag *tags, char **cmdline,
-			       struct meminfo *mi)
+static void __init fixup_corgi(struct tag *tags, char **cmdline)
 {
 	sharpsl_save_param();
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xa0000000;
 	if (machine_is_corgi())
-		mi->bank[0].size = (32*1024*1024);
+		memblock_add(0xa0000000, SZ_32M);
 	else
-		mi->bank[0].size = (64*1024*1024);
+		memblock_add(0xa0000000, SZ_64M);
 }
 
 #ifdef CONFIG_MACH_CORGI
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 8280ebcaab9f..cfb864173ce3 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -21,6 +21,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/memblock.h>
 
 #include <video/w100fb.h>
 
@@ -41,14 +42,12 @@
 #include "clock.h"
 
 /* Only e800 has 128MB RAM */
-void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
+void __init eseries_fixup(struct tag *tags, char **cmdline)
 {
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xa0000000;
 	if (machine_is_e800())
-		mi->bank[0].size = (128*1024*1024);
+		memblock_add(0xa0000000, SZ_128M);
 	else
-		mi->bank[0].size = (64*1024*1024);
+		memblock_add(0xa0000000, SZ_64M);
 }
 
 struct gpio_vbus_mach_info e7xx_udc_info = {
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
index 8bc02913517c..0e1bb46264f9 100644
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -14,6 +14,7 @@
 
 #include <linux/gpio.h>
 #include <linux/mfd/asic3.h>
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
 
 #define HX4700_ASIC3_GPIO_BASE	PXA_NR_BUILTIN_GPIO
 #define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
deleted file mode 100644
index af6760a50e1a..000000000000
--- a/arch/arm/mach-pxa/include/mach/timex.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/timex.h
- *
- * Author:	Nicolas Pitre
- * Created:	Jun 15, 2001
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* Various drivers are still using the constant of CLOCK_TICK_RATE, for
- * those drivers to at least work, the definition is provided here.
- *
- * NOTE: this is no longer accurate when multiple processors and boards
- * are selected, newer drivers should not depend on this any more.  Use
- * either the clocksource/clockevent or get this at run-time by calling
- * get_clock_tick_rate() (as defined in generic.c).
- */
-
-#if defined(CONFIG_PXA25x)
-/* PXA250/210 timer base */
-#define CLOCK_TICK_RATE 3686400
-#elif defined(CONFIG_PXA27x)
-/* PXA27x timer base */
-#ifdef CONFIG_MACH_MAINSTONE
-#define CLOCK_TICK_RATE 3249600
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index aedf053a1de5..131991629116 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -29,6 +29,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/mtd/sharpsl.h>
+#include <linux/memblock.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -456,13 +457,10 @@ static void __init poodle_init(void)
 	poodle_init_spi();
 }
 
-static void __init fixup_poodle(struct tag *tags, char **cmdline,
-				struct meminfo *mi)
+static void __init fixup_poodle(struct tag *tags, char **cmdline)
 {
 	sharpsl_save_param();
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].size = (32*1024*1024);
+	memblock_add(0xa0000000, SZ_32M);
 }
 
 MACHINE_START(POODLE, "SHARP Poodle")
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 0b11c1af51c4..840c3a48e720 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -32,6 +32,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/reboot.h>
+#include <linux/memblock.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -971,13 +972,10 @@ static void __init spitz_init(void)
 	spitz_i2c_init();
 }
 
-static void __init spitz_fixup(struct tag *tags, char **cmdline,
-			       struct meminfo *mi)
+static void __init spitz_fixup(struct tag *tags, char **cmdline)
 {
 	sharpsl_save_param();
-	mi->nr_banks = 1;
-	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].size = (64*1024*1024);
+	memblock_add(0xa0000000, SZ_64M);
 }
 
 #ifdef CONFIG_MACH_SPITZ
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ef5557b807ed..c158a6e3e0aa 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -37,6 +37,7 @@
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/reboot.h>
+#include <linux/memblock.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -960,13 +961,10 @@ static void __init tosa_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
-static void __init fixup_tosa(struct tag *tags, char **cmdline,
-			      struct meminfo *mi)
+static void __init fixup_tosa(struct tag *tags, char **cmdline)
 {
 	sharpsl_save_param();
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].size = (64*1024*1024);
+	memblock_add(0xa0000000, SZ_64M);
 }
 
 MACHINE_START(TOSA, "SHARP Tosa")
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 29905b127ad9..41f27f667ca8 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -885,9 +885,6 @@ static int viper_cpufreq_notifier(struct notifier_block *nb,
 			viper_set_core_cpu_voltage(freq->new, 0);
 		}
 		break;
-	case CPUFREQ_RESUMECHANGE:
-		viper_set_core_cpu_voltage(freq->new, 0);
-		break;
 	default:
 		/* ignore */
 		break;
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index b19d1c361cab..205f9bf3821e 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -413,7 +413,7 @@ static struct fixed_voltage_config can_regulator_pdata = {
 
 static struct platform_device can_regulator_device = {
 	.name	= "reg-fixed-volage",
-	.id	= -1,
+	.id	= 0,
 	.dev	= {
 		.platform_data	= &can_regulator_pdata,
 	},
@@ -510,18 +510,6 @@ struct platform_device zeus_max6369_device = {
 	.num_resources	= 1,
 };
 
-static struct platform_device *zeus_devices[] __initdata = {
-	&zeus_serial_device,
-	&zeus_mtd_devices[0],
-	&zeus_dm9k0_device,
-	&zeus_dm9k1_device,
-	&zeus_sram_device,
-	&zeus_leds_device,
-	&zeus_pcmcia_device,
-	&zeus_max6369_device,
-	&can_regulator_device,
-};
-
 /* AC'97 */
 static pxa2xx_audio_ops_t zeus_ac97_info = {
 	.reset_gpio = 95,
@@ -532,44 +520,50 @@ static pxa2xx_audio_ops_t zeus_ac97_info = {
  * USB host
  */
 
-static int zeus_ohci_init(struct device *dev)
-{
-	int err;
-
-	/* Switch on port 2. */
-	if ((err = gpio_request(ZEUS_USB2_PWREN_GPIO, "USB2_PWREN"))) {
-		dev_err(dev, "Can't request USB2_PWREN\n");
-		return err;
-	}
-
-	if ((err = gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 1))) {
-		gpio_free(ZEUS_USB2_PWREN_GPIO);
-		dev_err(dev, "Can't enable USB2_PWREN\n");
-		return err;
-	}
+static struct regulator_consumer_supply zeus_ohci_regulator_supplies[] = {
+	REGULATOR_SUPPLY("vbus2", "pxa27x-ohci"),
+};
 
-	/* Port 2 is shared between host and client interface. */
-	UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+static struct regulator_init_data zeus_ohci_regulator_data = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(zeus_ohci_regulator_supplies),
+	.consumer_supplies	= zeus_ohci_regulator_supplies,
+};
 
-	return 0;
-}
+static struct fixed_voltage_config zeus_ohci_regulator_config = {
+	.supply_name		= "vbus2",
+	.microvolts		= 5000000, /* 5.0V */
+	.gpio			= ZEUS_USB2_PWREN_GPIO,
+	.enable_high		= 1,
+	.startup_delay		= 0,
+	.init_data		= &zeus_ohci_regulator_data,
+};
 
-static void zeus_ohci_exit(struct device *dev)
-{
-	/* Power-off port 2 */
-	gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 0);
-	gpio_free(ZEUS_USB2_PWREN_GPIO);
-}
+static struct platform_device zeus_ohci_regulator_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &zeus_ohci_regulator_config,
+	},
+};
 
 static struct pxaohci_platform_data zeus_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
 	/* Clear Power Control Polarity Low and set Power Sense
 	 * Polarity Low. Supply power to USB ports. */
 	.flags		= ENABLE_PORT_ALL | POWER_SENSE_LOW,
-	.init		= zeus_ohci_init,
-	.exit		= zeus_ohci_exit,
 };
 
+static void zeus_register_ohci(void)
+{
+	/* Port 2 is shared between host and client interface. */
+	UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+	pxa_set_ohci_info(&zeus_ohci_platform_data);
+}
+
 /*
  * Flat Panel
  */
@@ -677,6 +671,19 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = {
 	.udc_command = zeus_udc_command,
 };
 
+static struct platform_device *zeus_devices[] __initdata = {
+	&zeus_serial_device,
+	&zeus_mtd_devices[0],
+	&zeus_dm9k0_device,
+	&zeus_dm9k1_device,
+	&zeus_sram_device,
+	&zeus_leds_device,
+	&zeus_pcmcia_device,
+	&zeus_max6369_device,
+	&can_regulator_device,
+	&zeus_ohci_regulator_device,
+};
+
 #ifdef CONFIG_PM
 static void zeus_power_off(void)
 {
@@ -847,7 +854,7 @@ static void __init zeus_init(void)
 
 	platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
 
-	pxa_set_ohci_info(&zeus_ohci_platform_data);
+	zeus_register_ohci();
 
 	if (zeus_setup_fb_gpios())
 		pr_err("Failed to setup fb gpios\n");
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
new file mode 100644
index 000000000000..fd2b99dceb89
--- /dev/null
+++ b/arch/arm/mach-qcom/Kconfig
@@ -0,0 +1,33 @@
+config ARCH_QCOM
+	bool "Qualcomm Support" if ARCH_MULTI_V7
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_GIC
+	select ARM_AMBA
+	select CLKSRC_OF
+	select PINCTRL
+	select QCOM_SCM if SMP
+	help
+	  Support for Qualcomm's devicetree based systems.
+
+if ARCH_QCOM
+
+menu "Qualcomm SoC Selection"
+
+config ARCH_MSM8X60
+	bool "Enable support for MSM8X60"
+	select CLKSRC_QCOM
+
+config ARCH_MSM8960
+	bool "Enable support for MSM8960"
+	select CLKSRC_QCOM
+
+config ARCH_MSM8974
+	bool "Enable support for MSM8974"
+	select HAVE_ARM_ARCH_TIMER
+
+endmenu
+
+config QCOM_SCM
+	bool
+
+endif
diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile
new file mode 100644
index 000000000000..8f756ae1ae31
--- /dev/null
+++ b/arch/arm/mach-qcom/Makefile
@@ -0,0 +1,5 @@
+obj-y			:= board.o
+obj-$(CONFIG_SMP)	+= platsmp.o
+obj-$(CONFIG_QCOM_SCM)	+= scm.o scm-boot.o
+
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-qcom/board.c
index 1f11d93e700e..c437a9941726 100644
--- a/arch/arm/mach-msm/board-dt.c
+++ b/arch/arm/mach-qcom/board.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -11,31 +11,18 @@
  */
 
 #include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 
-#include "common.h"
-
-static const char * const msm_dt_match[] __initconst = {
-	"qcom,msm8660-fluid",
+static const char * const qcom_dt_match[] __initconst = {
+	"qcom,apq8064",
+	"qcom,apq8074-dragonboard",
+	"qcom,apq8084",
 	"qcom,msm8660-surf",
 	"qcom,msm8960-cdp",
 	NULL
 };
 
-static const char * const apq8074_dt_match[] __initconst = {
-	"qcom,apq8074-dragonboard",
-	NULL
-};
-
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
-	.smp = smp_ops(msm_smp_ops),
-	.dt_compat = msm_dt_match,
-MACHINE_END
-
-DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)")
-	.dt_compat = apq8074_dt_match,
+DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
+	.dt_compat = qcom_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
new file mode 100644
index 000000000000..d6908569ecaf
--- /dev/null
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -0,0 +1,378 @@
+/*
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *  Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *  Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/smp_plat.h>
+
+#include "scm-boot.h"
+
+#define VDD_SC1_ARRAY_CLAMP_GFS_CTL	0x35a0
+#define SCSS_CPU1CORE_RESET		0x2d80
+#define SCSS_DBG_STATUS_CORE_PWRDUP	0x2e64
+
+#define APCS_CPU_PWR_CTL	0x04
+#define PLL_CLAMP		BIT(8)
+#define CORE_PWRD_UP		BIT(7)
+#define COREPOR_RST		BIT(5)
+#define CORE_RST		BIT(4)
+#define L2DT_SLP		BIT(3)
+#define CLAMP			BIT(0)
+
+#define APC_PWR_GATE_CTL	0x14
+#define BHS_CNT_SHIFT		24
+#define LDO_PWR_DWN_SHIFT	16
+#define LDO_BYP_SHIFT		8
+#define BHS_SEG_SHIFT		1
+#define BHS_EN			BIT(0)
+
+#define APCS_SAW2_VCTL		0x14
+#define APCS_SAW2_2_VCTL	0x1c
+
+extern void secondary_startup(void);
+
+static DEFINE_SPINLOCK(boot_lock);
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void __ref qcom_cpu_die(unsigned int cpu)
+{
+	wfi();
+}
+#endif
+
+static void qcom_secondary_init(unsigned int cpu)
+{
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+static int scss_release_secondary(unsigned int cpu)
+{
+	struct device_node *node;
+	void __iomem *base;
+
+	node = of_find_compatible_node(NULL, NULL, "qcom,gcc-msm8660");
+	if (!node) {
+		pr_err("%s: can't find node\n", __func__);
+		return -ENXIO;
+	}
+
+	base = of_iomap(node, 0);
+	of_node_put(node);
+	if (!base)
+		return -ENOMEM;
+
+	writel_relaxed(0, base + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
+	writel_relaxed(0, base + SCSS_CPU1CORE_RESET);
+	writel_relaxed(3, base + SCSS_DBG_STATUS_CORE_PWRDUP);
+	mb();
+	iounmap(base);
+
+	return 0;
+}
+
+static int kpssv1_release_secondary(unsigned int cpu)
+{
+	int ret = 0;
+	void __iomem *reg, *saw_reg;
+	struct device_node *cpu_node, *acc_node, *saw_node;
+	u32 val;
+
+	cpu_node = of_get_cpu_node(cpu, NULL);
+	if (!cpu_node)
+		return -ENODEV;
+
+	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
+	if (!acc_node) {
+		ret = -ENODEV;
+		goto out_acc;
+	}
+
+	saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
+	if (!saw_node) {
+		ret = -ENODEV;
+		goto out_saw;
+	}
+
+	reg = of_iomap(acc_node, 0);
+	if (!reg) {
+		ret = -ENOMEM;
+		goto out_acc_map;
+	}
+
+	saw_reg = of_iomap(saw_node, 0);
+	if (!saw_reg) {
+		ret = -ENOMEM;
+		goto out_saw_map;
+	}
+
+	/* Turn on CPU rail */
+	writel_relaxed(0xA4, saw_reg + APCS_SAW2_VCTL);
+	mb();
+	udelay(512);
+
+	/* Krait bring-up sequence */
+	val = PLL_CLAMP | L2DT_SLP | CLAMP;
+	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+	val &= ~L2DT_SLP;
+	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+	mb();
+	ndelay(300);
+
+	val |= COREPOR_RST;
+	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+	mb();
+	udelay(2);
+
+	val &= ~CLAMP;
+	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+	mb();
+	udelay(2);
+
+	val &= ~COREPOR_RST;
+	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+	mb();
+	udelay(100);
+
+	val |= CORE_PWRD_UP;
+	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
+	mb();
+
+	iounmap(saw_reg);
+out_saw_map:
+	iounmap(reg);
+out_acc_map:
+	of_node_put(saw_node);
+out_saw:
+	of_node_put(acc_node);
+out_acc:
+	of_node_put(cpu_node);
+	return ret;
+}
+
+static int kpssv2_release_secondary(unsigned int cpu)
+{
+	void __iomem *reg;
+	struct device_node *cpu_node, *l2_node, *acc_node, *saw_node;
+	void __iomem *l2_saw_base;
+	unsigned reg_val;
+	int ret;
+
+	cpu_node = of_get_cpu_node(cpu, NULL);
+	if (!cpu_node)
+		return -ENODEV;
+
+	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
+	if (!acc_node) {
+		ret = -ENODEV;
+		goto out_acc;
+	}
+
+	l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0);
+	if (!l2_node) {
+		ret = -ENODEV;
+		goto out_l2;
+	}
+
+	saw_node = of_parse_phandle(l2_node, "qcom,saw", 0);
+	if (!saw_node) {
+		ret = -ENODEV;
+		goto out_saw;
+	}
+
+	reg = of_iomap(acc_node, 0);
+	if (!reg) {
+		ret = -ENOMEM;
+		goto out_map;
+	}
+
+	l2_saw_base = of_iomap(saw_node, 0);
+	if (!l2_saw_base) {
+		ret = -ENOMEM;
+		goto out_saw_map;
+	}
+
+	/* Turn on the BHS, turn off LDO Bypass and power down LDO */
+	reg_val = (64 << BHS_CNT_SHIFT) | (0x3f << LDO_PWR_DWN_SHIFT) | BHS_EN;
+	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+	mb();
+	/* wait for the BHS to settle */
+	udelay(1);
+
+	/* Turn on BHS segments */
+	reg_val |= 0x3f << BHS_SEG_SHIFT;
+	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+	mb();
+	 /* wait for the BHS to settle */
+	udelay(1);
+
+	/* Finally turn on the bypass so that BHS supplies power */
+	reg_val |= 0x3f << LDO_BYP_SHIFT;
+	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
+
+	/* enable max phases */
+	writel_relaxed(0x10003, l2_saw_base + APCS_SAW2_2_VCTL);
+	mb();
+	udelay(50);
+
+	reg_val = COREPOR_RST | CLAMP;
+	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+	mb();
+	udelay(2);
+
+	reg_val &= ~CLAMP;
+	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+	mb();
+	udelay(2);
+
+	reg_val &= ~COREPOR_RST;
+	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+	mb();
+
+	reg_val |= CORE_PWRD_UP;
+	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
+	mb();
+
+	ret = 0;
+
+	iounmap(l2_saw_base);
+out_saw_map:
+	iounmap(reg);
+out_map:
+	of_node_put(saw_node);
+out_saw:
+	of_node_put(l2_node);
+out_l2:
+	of_node_put(acc_node);
+out_acc:
+	of_node_put(cpu_node);
+
+	return ret;
+}
+
+static DEFINE_PER_CPU(int, cold_boot_done);
+
+static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int))
+{
+	int ret = 0;
+
+	if (!per_cpu(cold_boot_done, cpu)) {
+		ret = func(cpu);
+		if (!ret)
+			per_cpu(cold_boot_done, cpu) = true;
+	}
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * the boot monitor to read the system wide flags register,
+	 * and branch to the address found there.
+	 */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return ret;
+}
+
+static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	return qcom_boot_secondary(cpu, scss_release_secondary);
+}
+
+static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	return qcom_boot_secondary(cpu, kpssv1_release_secondary);
+}
+
+static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	return qcom_boot_secondary(cpu, kpssv2_release_secondary);
+}
+
+static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
+{
+	int cpu, map;
+	unsigned int flags = 0;
+	static const int cold_boot_flags[] = {
+		0,
+		SCM_FLAG_COLDBOOT_CPU1,
+		SCM_FLAG_COLDBOOT_CPU2,
+		SCM_FLAG_COLDBOOT_CPU3,
+	};
+
+	for_each_present_cpu(cpu) {
+		map = cpu_logical_map(cpu);
+		if (WARN_ON(map >= ARRAY_SIZE(cold_boot_flags))) {
+			set_cpu_present(cpu, false);
+			continue;
+		}
+		flags |= cold_boot_flags[map];
+	}
+
+	if (scm_set_boot_addr(virt_to_phys(secondary_startup), flags)) {
+		for_each_present_cpu(cpu) {
+			if (cpu == smp_processor_id())
+				continue;
+			set_cpu_present(cpu, false);
+		}
+		pr_warn("Failed to set CPU boot address, disabling SMP\n");
+	}
+}
+
+static struct smp_operations smp_msm8660_ops __initdata = {
+	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
+	.smp_secondary_init	= qcom_secondary_init,
+	.smp_boot_secondary	= msm8660_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= qcom_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
+
+static struct smp_operations qcom_smp_kpssv1_ops __initdata = {
+	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
+	.smp_secondary_init	= qcom_secondary_init,
+	.smp_boot_secondary	= kpssv1_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= qcom_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops);
+
+static struct smp_operations qcom_smp_kpssv2_ops __initdata = {
+	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
+	.smp_secondary_init	= qcom_secondary_init,
+	.smp_boot_secondary	= kpssv2_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= qcom_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp_kpssv2, "qcom,kpss-acc-v2", &qcom_smp_kpssv2_ops);
diff --git a/arch/arm/mach-msm/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c
index 45cee3e469a5..45cee3e469a5 100644
--- a/arch/arm/mach-msm/scm-boot.c
+++ b/arch/arm/mach-qcom/scm-boot.c
diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h
index 7be32ff5d687..6aabb2428176 100644
--- a/arch/arm/mach-msm/scm-boot.h
+++ b/arch/arm/mach-qcom/scm-boot.h
@@ -13,9 +13,11 @@
 #define __MACH_SCM_BOOT_H
 
 #define SCM_BOOT_ADDR			0x1
-#define SCM_FLAG_COLDBOOT_CPU1		0x1
-#define SCM_FLAG_WARMBOOT_CPU1		0x2
-#define SCM_FLAG_WARMBOOT_CPU0		0x4
+#define SCM_FLAG_COLDBOOT_CPU1		0x01
+#define SCM_FLAG_COLDBOOT_CPU2		0x08
+#define SCM_FLAG_COLDBOOT_CPU3		0x20
+#define SCM_FLAG_WARMBOOT_CPU0		0x04
+#define SCM_FLAG_WARMBOOT_CPU1		0x02
 
 int scm_set_boot_addr(phys_addr_t addr, int flags);
 
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-qcom/scm.c
index c536fd6bf827..c536fd6bf827 100644
--- a/arch/arm/mach-msm/scm.c
+++ b/arch/arm/mach-qcom/scm.c
diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-qcom/scm.h
index 00b31ea58f29..00b31ea58f29 100644
--- a/arch/arm/mach-msm/scm.h
+++ b/arch/arm/mach-qcom/scm.h
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 1d5ee5c9a1dc..8c1b39a0caa0 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -31,6 +31,7 @@
 #include <linux/amba/mmci.h>
 #include <linux/gfp.h>
 #include <linux/mtd/physmap.h>
+#include <linux/memblock.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -148,6 +149,21 @@ struct platform_device realview_cf_device = {
 	},
 };
 
+static struct resource realview_leds_resources[] = {
+	{
+		.start	= REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET,
+		.end	= REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET + 4,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device realview_leds_device = {
+	.name		= "versatile-leds",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(realview_leds_resources),
+	.resource	= realview_leds_resources,
+};
+
 static struct resource realview_i2c_resource = {
 	.start		= REALVIEW_I2C_BASE,
 	.end		= REALVIEW_I2C_BASE + SZ_4K - 1,
@@ -370,19 +386,15 @@ void __init realview_timer_init(unsigned int timer_irq)
 /*
  * Setup the memory banks.
  */
-void realview_fixup(struct tag *tags, char **from, struct meminfo *meminfo)
+void realview_fixup(struct tag *tags, char **from)
 {
 	/*
 	 * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
 	 * Half of this is mirrored at 0.
 	 */
 #ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-	meminfo->bank[0].start = 0x70000000;
-	meminfo->bank[0].size = SZ_512M;
-	meminfo->nr_banks = 1;
+	memblock_add(0x70000000, SZ_512M);
 #else
-	meminfo->bank[0].start = 0;
-	meminfo->bank[0].size = SZ_256M;
-	meminfo->nr_banks = 1;
+	memblock_add(0, SZ_256M);
 #endif
 }
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 602ca5ec52c5..868ece221978 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -37,6 +37,7 @@ struct machine_desc;
 
 extern struct platform_device realview_flash_device;
 extern struct platform_device realview_cf_device;
+extern struct platform_device realview_leds_device;
 extern struct platform_device realview_i2c_device;
 extern struct mmci_platform_data realview_mmc0_plat_data;
 extern struct mmci_platform_data realview_mmc1_plat_data;
@@ -51,8 +52,7 @@ extern int realview_flash_register(struct resource *res, u32 num);
 extern int realview_eth_register(const char *name, struct resource *res);
 extern int realview_usb_register(struct resource *res);
 extern void realview_init_early(void);
-extern void realview_fixup(struct tag *tags, char **from,
-			   struct meminfo *meminfo);
+extern void realview_fixup(struct tag *tags, char **from);
 
 extern struct smp_operations realview_smp_ops;
 extern void realview_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 2022e092f0ca..db09170e3832 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -56,6 +56,8 @@
 #define PAGE_OFFSET1	(PAGE_OFFSET + 0x10000000)
 #define PAGE_OFFSET2	(PAGE_OFFSET + 0x30000000)
 
+#define PHYS_OFFSET PLAT_PHYS_OFFSET
+
 #define __phys_to_virt(phys)						\
 	((phys) >= 0x80000000 ?	(phys) - 0x80000000 + PAGE_OFFSET2 :	\
 	 (phys) >= 0x20000000 ?	(phys) - 0x20000000 + PAGE_OFFSET1 :	\
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index c85ddb2a0ad0..739d4f113097 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -442,8 +442,13 @@ static void __init realview_eb_init(void)
 		realview_eb11mp_fixup();
 
 #ifdef CONFIG_CACHE_L2X0
-		/* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
-		 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
+		/*
+		 * The PL220 needs to be manually configured as the hardware
+		 * doesn't report the correct sizes.
+		 * 1MB (128KB/way), 8-way associativity, event monitor and
+		 * parity enabled, ignore share bit, no force write allocate
+		 * Bits:  .... ...0 0111 1001 0000 .... .... ....
+		 */
 		l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
 #endif
 		platform_device_register(&pmu_device);
@@ -452,6 +457,7 @@ static void __init realview_eb_init(void)
 	realview_flash_register(&realview_eb_flash_resource, 1);
 	platform_device_register(&realview_i2c_device);
 	platform_device_register(&char_lcd_device);
+	platform_device_register(&realview_leds_device);
 	eth_device_register();
 	realview_usb_register(realview_eb_isp1761_resources);
 
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index c5eade76461b..b0e0dcaed944 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -32,6 +32,7 @@
 #include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-realview.h>
 #include <linux/reboot.h>
+#include <linux/memblock.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -339,15 +340,12 @@ static void realview_pb1176_restart(enum reboot_mode mode, const char *cmd)
 	dsb();
 }
 
-static void realview_pb1176_fixup(struct tag *tags, char **from,
-				  struct meminfo *meminfo)
+static void realview_pb1176_fixup(struct tag *tags, char **from)
 {
 	/*
 	 * RealView PB1176 only has 128MB of RAM mapped at 0.
 	 */
-	meminfo->bank[0].start = 0;
-	meminfo->bank[0].size = SZ_128M;
-	meminfo->nr_banks = 1;
+	memblock_add(0, SZ_128M);
 }
 
 static void __init realview_pb1176_init(void)
@@ -355,7 +353,13 @@ static void __init realview_pb1176_init(void)
 	int i;
 
 #ifdef CONFIG_CACHE_L2X0
-	/* 128Kb (16Kb/way) 8-way associativity. evmon/parity/share enabled. */
+	/*
+	 * The PL220 needs to be manually configured as the hardware
+	 * doesn't report the correct sizes.
+	 * 128kB (16kB/way), 8-way associativity, event monitor and
+	 * parity enabled, ignore share bit, no force write allocate
+	 * Bits:  .... ...0 0111 0011 0000 .... .... ....
+	 */
 	l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
 #endif
 
@@ -367,6 +371,7 @@ static void __init realview_pb1176_init(void)
 	realview_usb_register(realview_pb1176_isp1761_resources);
 	platform_device_register(&pmu_device);
 	platform_device_register(&char_lcd_device);
+	platform_device_register(&realview_leds_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index f4b0962578fe..47bf55fdbf27 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -337,8 +337,13 @@ static void __init realview_pb11mp_init(void)
 	int i;
 
 #ifdef CONFIG_CACHE_L2X0
-	/* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
-	 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
+	/*
+	 * The PL220 needs to be manually configured as the hardware
+	 * doesn't report the correct sizes.
+	 * 1MB (128KB/way), 8-way associativity, event monitor and
+	 * parity enabled, ignore share bit, no force write allocate
+	 * Bits:  .... ...0 0111 1001 0000 .... .... ....
+	 */
 	l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff);
 #endif
 
@@ -347,6 +352,7 @@ static void __init realview_pb11mp_init(void)
 	realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	platform_device_register(&realview_cf_device);
+	platform_device_register(&realview_leds_device);
 	realview_usb_register(realview_pb11mp_isp1761_resources);
 	platform_device_register(&pmu_device);
 
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 10a3e1d76891..4e57a8599265 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -289,6 +289,7 @@ static void __init realview_pba8_init(void)
 	realview_eth_register(NULL, realview_pba8_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	platform_device_register(&realview_cf_device);
+	platform_device_register(&realview_leds_device);
 	realview_usb_register(realview_pba8_isp1761_resources);
 	platform_device_register(&pmu_device);
 
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 9d75493e3f0c..d89eb4023467 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -29,6 +29,7 @@
 #include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-realview.h>
 #include <linux/reboot.h>
+#include <linux/memblock.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
@@ -325,23 +326,19 @@ static void __init realview_pbx_timer_init(void)
 	realview_pbx_twd_init();
 }
 
-static void realview_pbx_fixup(struct tag *tags, char **from,
-			       struct meminfo *meminfo)
+static void realview_pbx_fixup(struct tag *tags, char **from)
 {
 #ifdef CONFIG_SPARSEMEM
 	/*
 	 * Memory configuration with SPARSEMEM enabled on RealView PBX (see
 	 * asm/mach/memory.h for more information).
 	 */
-	meminfo->bank[0].start = 0;
-	meminfo->bank[0].size = SZ_256M;
-	meminfo->bank[1].start = 0x20000000;
-	meminfo->bank[1].size = SZ_512M;
-	meminfo->bank[2].start = 0x80000000;
-	meminfo->bank[2].size = SZ_256M;
-	meminfo->nr_banks = 3;
+
+	memblock_add(0, SZ_256M);
+	memblock_add(0x20000000, SZ_512M);
+	memblock_add(0x80000000, SZ_256M);
 #else
-	realview_fixup(tags, from, meminfo);
+	realview_fixup(tags, from);
 #endif
 }
 
@@ -370,8 +367,8 @@ static void __init realview_pbx_init(void)
 			__io_address(REALVIEW_PBX_TILE_L220_BASE);
 
 		/* set RAM latencies to 1 cycle for eASIC */
-		writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
-		writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+		writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
+		writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
 
 		/* 16KB way size, 8-way associativity, parity disabled
 		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
@@ -385,6 +382,7 @@ static void __init realview_pbx_init(void)
 	realview_eth_register(NULL, realview_pbx_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	platform_device_register(&realview_cf_device);
+	platform_device_register(&realview_leds_device);
 	realview_usb_register(realview_pbx_isp1761_resources);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index cf073dea5784..1caee6d548b8 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -5,10 +5,8 @@ config ARCH_ROCKCHIP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
 	select CACHE_L2X0
+	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
 	select DW_APB_TIMER_OF
 	select ARM_GLOBAL_TIMER
 	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 1547d4fc920a..4377a1436a98 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip.o
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-rockchip/core.h
index 4eeb069373c2..39bca96b555a 100644
--- a/arch/arm/mach-realview/include/mach/timex.h
+++ b/arch/arm/mach-rockchip/core.h
@@ -1,9 +1,6 @@
 /*
- *  arch/arm/mach-realview/include/mach/timex.h
- *
- *  RealView architecture timex specifications
- *
- *  Copyright (C) 2003 ARM Limited
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,10 +11,10 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#define CLOCK_TICK_RATE		(50000000 / 16)
+extern char rockchip_secondary_trampoline;
+extern char rockchip_secondary_trampoline_end;
+
+extern unsigned long rockchip_boot_fn;
+extern void rockchip_secondary_startup(void);
diff --git a/arch/arm/mach-integrator/include/mach/timex.h b/arch/arm/mach-rockchip/headsmp.S
index 1dcb42028c82..73206e360e31 100644
--- a/arch/arm/mach-integrator/include/mach/timex.h
+++ b/arch/arm/mach-rockchip/headsmp.S
@@ -1,9 +1,6 @@
 /*
- *  arch/arm/mach-integrator/include/mach/timex.h
- *
- *  Integrator architecture timex specifications
- *
- *  Copyright (C) 1999 ARM Limited
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,13 +11,20 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/linkage.h>
+#include <linux/init.h>
 
-/*
- * ??
- */
-#define CLOCK_TICK_RATE		(50000000 / 16)
+ENTRY(rockchip_secondary_startup)
+	bl	v7_invalidate_l1
+	b	secondary_startup
+ENDPROC(rockchip_secondary_startup)
+
+ENTRY(rockchip_secondary_trampoline)
+	ldr	pc, 1f
+ENDPROC(rockchip_secondary_trampoline)
+	.globl	rockchip_boot_fn
+rockchip_boot_fn:
+1:	.space	4
+
+ENTRY(rockchip_secondary_trampoline_end)
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
new file mode 100644
index 000000000000..910835d4ccf4
--- /dev/null
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include <asm/mach/map.h>
+
+#include "core.h"
+
+static void __iomem *scu_base_addr;
+static void __iomem *sram_base_addr;
+static int ncores;
+
+#define PMU_PWRDN_CON		0x08
+#define PMU_PWRDN_ST		0x0c
+
+#define PMU_PWRDN_SCU		4
+
+static void __iomem *pmu_base_addr;
+
+static inline bool pmu_power_domain_is_on(int pd)
+{
+	return !(readl_relaxed(pmu_base_addr + PMU_PWRDN_ST) & BIT(pd));
+}
+
+static void pmu_set_power_domain(int pd, bool on)
+{
+	u32 val = readl_relaxed(pmu_base_addr + PMU_PWRDN_CON);
+	if (on)
+		val &= ~BIT(pd);
+	else
+		val |=  BIT(pd);
+	writel(val, pmu_base_addr + PMU_PWRDN_CON);
+
+	while (pmu_power_domain_is_on(pd) != on) { }
+}
+
+/*
+ * Handling of CPU cores
+ */
+
+static int __cpuinit rockchip_boot_secondary(unsigned int cpu,
+					     struct task_struct *idle)
+{
+	if (!sram_base_addr || !pmu_base_addr) {
+		pr_err("%s: sram or pmu missing for cpu boot\n", __func__);
+		return -ENXIO;
+	}
+
+	if (cpu >= ncores) {
+		pr_err("%s: cpu %d outside maximum number of cpus %d\n",
+							__func__, cpu, ncores);
+		return -ENXIO;
+	}
+
+	/* start the core */
+	pmu_set_power_domain(0 + cpu, true);
+
+	return 0;
+}
+
+/**
+ * rockchip_smp_prepare_sram - populate necessary sram block
+ * Starting cores execute the code residing at the start of the on-chip sram
+ * after power-on. Therefore make sure, this sram region is reserved and
+ * big enough. After this check, copy the trampoline code that directs the
+ * core to the real startup code in ram into the sram-region.
+ * @node: mmio-sram device node
+ */
+static int __init rockchip_smp_prepare_sram(struct device_node *node)
+{
+	unsigned int trampoline_sz = &rockchip_secondary_trampoline_end -
+					    &rockchip_secondary_trampoline;
+	struct resource res;
+	unsigned int rsize;
+	int ret;
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret < 0) {
+		pr_err("%s: could not get address for node %s\n",
+		       __func__, node->full_name);
+		return ret;
+	}
+
+	rsize = resource_size(&res);
+	if (rsize < trampoline_sz) {
+		pr_err("%s: reserved block with size 0x%x is to small for trampoline size 0x%x\n",
+		       __func__, rsize, trampoline_sz);
+		return -EINVAL;
+	}
+
+	sram_base_addr = of_iomap(node, 0);
+
+	/* set the boot function for the sram code */
+	rockchip_boot_fn = virt_to_phys(rockchip_secondary_startup);
+
+	/* copy the trampoline to sram, that runs during startup of the core */
+	memcpy(sram_base_addr, &rockchip_secondary_trampoline, trampoline_sz);
+	flush_cache_all();
+	outer_clean_range(0, trampoline_sz);
+
+	dsb_sev();
+
+	return 0;
+}
+
+static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *node;
+	unsigned int i;
+
+	node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+	if (!node) {
+		pr_err("%s: missing scu\n", __func__);
+		return;
+	}
+
+	scu_base_addr = of_iomap(node, 0);
+	if (!scu_base_addr) {
+		pr_err("%s: could not map scu registers\n", __func__);
+		return;
+	}
+
+	node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram");
+	if (!node) {
+		pr_err("%s: could not find sram dt node\n", __func__);
+		return;
+	}
+
+	if (rockchip_smp_prepare_sram(node))
+		return;
+
+	node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu");
+	if (!node) {
+		pr_err("%s: could not find pmu dt node\n", __func__);
+		return;
+	}
+
+	pmu_base_addr = of_iomap(node, 0);
+	if (!pmu_base_addr) {
+		pr_err("%s: could not map pmu registers\n", __func__);
+		return;
+	}
+
+	/* enable the SCU power domain */
+	pmu_set_power_domain(PMU_PWRDN_SCU, true);
+
+	/*
+	 * While the number of cpus is gathered from dt, also get the number
+	 * of cores from the scu to verify this value when booting the cores.
+	 */
+	ncores = scu_get_core_count(scu_base_addr);
+
+	scu_enable(scu_base_addr);
+
+	/* Make sure that all cores except the first are really off */
+	for (i = 1; i < ncores; i++)
+		pmu_set_power_domain(0 + i, false);
+}
+
+static struct smp_operations rockchip_smp_ops __initdata = {
+	.smp_prepare_cpus	= rockchip_smp_prepare_cpus,
+	.smp_boot_secondary	= rockchip_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops);
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 82c0b0709712..968cc348e624 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -22,12 +22,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/cache-l2x0.h>
-
-static void __init rockchip_dt_init(void)
-{
-	l2x0_of_init(0, ~0UL);
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
+#include "core.h"
 
 static const char * const rockchip_board_dt_compat[] = {
 	"rockchip,rk2928",
@@ -38,6 +33,7 @@ static const char * const rockchip_board_dt_compat[] = {
 };
 
 DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
-	.init_machine	= rockchip_dt_init,
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
 	.dt_compat	= rockchip_board_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 85883b2e0e49..6d3517dc4772 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -141,7 +141,7 @@ static int iomd_request_dma(unsigned int chan, dma_t *dma)
 	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
 
 	return request_irq(idma->irq, iomd_dma_handle,
-			   IRQF_DISABLED, idma->dma.device_id, idma);
+			   0, idma->dma.device_id, idma);
 }
 
 static void iomd_free_dma(unsigned int chan, dma_t *dma)
diff --git a/arch/arm/mach-rpc/include/mach/timex.h b/arch/arm/mach-rpc/include/mach/timex.h
deleted file mode 100644
index dd75e7387bbe..000000000000
--- a/arch/arm/mach-rpc/include/mach/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- *  arch/arm/mach-rpc/include/mach/timex.h
- *
- *  Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  RiscPC architecture timex specifications
- */
-
-/*
- * On the RiscPC, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE		2000000
-
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index 9a6def14df01..2689771c1d38 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -24,6 +24,9 @@
 
 #include <asm/mach/time.h>
 
+#define RPC_CLOCK_FREQ 2000000
+#define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ)
+
 static u32 ioc_timer_gettimeoffset(void)
 {
 	unsigned int count1, count2, status;
@@ -46,23 +49,23 @@ static u32 ioc_timer_gettimeoffset(void)
 		 * and count2.
 		 */
 		if (status & (1 << 5))
-			offset -= LATCH;
+			offset -= RPC_LATCH;
 	} else if (count2 > count1) {
 		/*
 		 * We have just had another interrupt between reading
 		 * count1 and count2.
 		 */
-		offset -= LATCH;
+		offset -= RPC_LATCH;
 	}
 
-	offset = (LATCH - offset) * (tick_nsec / 1000);
-	return ((offset + LATCH/2) / LATCH) * 1000;
+	offset = (RPC_LATCH - offset) * (tick_nsec / 1000);
+	return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000;
 }
 
 void __init ioctime_init(void)
 {
-	ioc_writeb(LATCH & 255, IOC_T0LTCHL);
-	ioc_writeb(LATCH >> 8, IOC_T0LTCHH);
+	ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL);
+	ioc_writeb(RPC_LATCH >> 8, IOC_T0LTCHH);
 	ioc_writeb(0, IOC_T0GO);
 }
 
@@ -75,7 +78,6 @@ ioc_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction ioc_timer_irq = {
 	.name		= "timer",
-	.flags		= IRQF_DISABLED,
 	.handler	= ioc_timer_interrupt
 };
 
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index d876431d64c0..04284de7aca5 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -12,12 +12,14 @@ if ARCH_S3C24XX
 config PLAT_S3C24XX
 	def_bool y
 	select ARCH_REQUIRE_GPIOLIB
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select S3C_DEV_NAND
 	select IRQ_DOMAIN
 	help
 	  Base platform code for any Samsung S3C24XX device
 
+
+
 menu "SAMSUNG S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
@@ -26,8 +28,7 @@ config CPU_S3C2410
 	bool "SAMSUNG S3C2410"
 	default y
 	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2410
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
@@ -39,7 +40,7 @@ config CPU_S3C2410
 config CPU_S3C2412
 	bool "SAMSUNG S3C2412"
 	select CPU_ARM926T
-	select CPU_LLSERIAL_S3C2440
+	select S3C2412_COMMON_CLK
 	select S3C2412_DMA if S3C24XX_DMA
 	select S3C2412_PM if PM
 	help
@@ -48,19 +49,16 @@ config CPU_S3C2412
 config CPU_S3C2416
 	bool "SAMSUNG S3C2416/S3C2450"
 	select CPU_ARM926T
-	select CPU_LLSERIAL_S3C2440
 	select S3C2416_PM if PM
-	select S3C2443_COMMON
+	select S3C2443_COMMON_CLK
 	select S3C2443_DMA if S3C24XX_DMA
-	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
 config CPU_S3C2440
 	bool "SAMSUNG S3C2440"
 	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2440
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C24XX_DMA
 	help
@@ -69,8 +67,7 @@ config CPU_S3C2440
 config CPU_S3C2442
 	bool "SAMSUNG S3C2442"
 	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2440
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select S3C2410_PM if PM
 	help
@@ -84,26 +81,13 @@ config CPU_S3C244X
 config CPU_S3C2443
 	bool "SAMSUNG S3C2443"
 	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2440
-	select S3C2443_COMMON
+	select S3C2443_COMMON_CLK
 	select S3C2443_DMA if S3C24XX_DMA
-	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
 # common code
 
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors which
-	  is currently includes the S3C2410, S3C2440, S3C2442.
-
-config S3C24XX_DCLK
-	bool
-	help
-	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-
 config S3C24XX_SMDK
 	bool
 	help
@@ -158,28 +142,6 @@ config S3C2410_PM
 	help
 	  Power Management code common to S3C2410 and better
 
-# low-level serial option nodes
-
-config CPU_LLSERIAL_S3C2410_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
-	bool
-	help
-	  Selected if there is an S3C2410 (or register compatible) serial
-	  low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
-	bool
-	help
-	  Selected if there is an S3C2440 (or register compatible) serial
-	  low-level implementation needed
-
 config S3C24XX_PLL
 	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
 	depends on ARM_S3C24XX_CPUFREQ
@@ -258,8 +220,8 @@ config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select ISA
 	select MACH_BAST_IDE
+	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
-	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_NOR
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
@@ -340,7 +302,7 @@ config MACH_TCT_HAMMER
 config MACH_VR1000
 	bool "Thorcom VR1000"
 	select MACH_BAST_IDE
-	select S3C24XX_DCLK
+	select S3C2410_COMMON_DCLK
 	select S3C24XX_SIMTEC_NOR
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
@@ -519,9 +481,8 @@ comment "S3C2440 Boards"
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
 	select HAVE_PATA_PLATFORM
+	select S3C2410_COMMON_DCLK
 	select S3C2440_XTAL_12000000
-	select S3C24XX_DCLK
-	select S3C24XX_GPIO_EXTRA64
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_USB_HOST
 	help
@@ -537,7 +498,7 @@ config MACH_AT2440EVB
 
 config MACH_MINI2440
 	bool "MINI2440 development board"
-	select EEPROM_AT24
+	select EEPROM_AT24 if I2C
 	select LEDS_CLASS
 	select LEDS_TRIGGERS
 	select LEDS_TRIGGER_BACKLIGHT
@@ -559,10 +520,9 @@ config MACH_NEXCODER_2440
 
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
+	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_12000000
-	select S3C24XX_DCLK
-	select S3C24XX_GPIO_EXTRA128
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
@@ -573,7 +533,7 @@ config MACH_OSIRIS
 config MACH_OSIRIS_DVS
 	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
 	depends on MACH_OSIRIS
-	select TPS65010
+	depends on TPS65010
 	help
 	  Say Y/M here if you want to have dynamic voltage scaling support
 	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
@@ -631,9 +591,9 @@ config MACH_RX1950
 	bool "HP iPAQ rx1950"
 	select I2C
 	select PM_H1940 if PM
+	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
-	select S3C24XX_DCLK
 	select S3C24XX_PWM
 	select S3C_DEV_NAND
 	help
@@ -643,12 +603,6 @@ endif	# CPU_S3C2442
 
 if CPU_S3C2443 || CPU_S3C2416
 
-config S3C2443_COMMON
-	bool
-	help
-	  Common code for the S3C2443 and similar processors, which includes
-	  the S3C2416 and S3C2450.
-
 config S3C2443_DMA
 	bool
 	help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 7f54e5b954ca..2235d0d3b38d 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -21,22 +21,22 @@ obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
 
-obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock-s3c2416.o
+obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o
 obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
 
-obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o clock-s3c2443.o
+obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
 
 # PM
 
@@ -44,16 +44,13 @@ obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
 
 # common code
 
-obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
 
-obj-$(CONFIG_S3C2410_CLOCK)	+= clock-s3c2410.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
 
 obj-$(CONFIG_S3C2410_IOTIMING)	+= iotiming-s3c2410.o
 obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
 
-obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
 obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
 
 #
diff --git a/arch/arm/mach-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c
deleted file mode 100644
index 1edd9b2369c5..000000000000
--- a/arch/arm/mach-s3c24xx/clock-dclk.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Copyright (c) 2004-2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX - definitions for DCLK and CLKOUT registers
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
-	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (enable)
-		dclkcon |= clk->ctrlbit;
-	else
-		dclkcon &= ~clk->ctrlbit;
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long dclkcon;
-	unsigned int uclk;
-
-	if (parent == &clk_upll)
-		uclk = 1;
-	else if (parent == &clk_p)
-		uclk = 0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
-	} else {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
-	}
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
-{
-	unsigned long div;
-
-	if ((rate == 0) || !clk->parent)
-		return 0;
-
-	div = clk_get_rate(clk->parent) / rate;
-	if (div < 2)
-		div = 2;
-	else if (div > 16)
-		div = 16;
-
-	return div;
-}
-
-static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
-	unsigned long rate)
-{
-	unsigned long div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return 0;
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return -EINVAL;
-
-	if (clk == &s3c24xx_dclk0) {
-		mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
-			S3C2410_DCLKCON_DCLK0_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK0_DIV(div) |
-			S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
-	} else if (clk == &s3c24xx_dclk1) {
-		mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
-			S3C2410_DCLKCON_DCLK1_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK1_DIV(div) |
-			S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
-	} else
-		return -EINVAL;
-
-	clk->rate = clk_get_rate(clk->parent) / div;
-	__raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
-		S3C24XX_DCLKCON);
-	return clk->rate;
-}
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long mask;
-	unsigned long source;
-
-	/* calculate the MISCCR setting for the clock */
-
-	if (parent == &clk_mpll)
-		source = S3C2410_MISCCR_CLK0_MPLL;
-	else if (parent == &clk_upll)
-		source = S3C2410_MISCCR_CLK0_UPLL;
-	else if (parent == &clk_f)
-		source = S3C2410_MISCCR_CLK0_FCLK;
-	else if (parent == &clk_h)
-		source = S3C2410_MISCCR_CLK0_HCLK;
-	else if (parent == &clk_p)
-		source = S3C2410_MISCCR_CLK0_PCLK;
-	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	if (clk == &s3c24xx_clkout0)
-		mask = S3C2410_MISCCR_CLK0_MASK;
-	else {
-		source <<= 4;
-		mask = S3C2410_MISCCR_CLK1_MASK;
-	}
-
-	s3c2410_modify_misccr(mask, source);
-	return 0;
-}
-
-/* external clock definitions */
-
-static struct clk_ops dclk_ops = {
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_dclk0 = {
-	.name		= "dclk0",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable	        = s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-struct clk s3c24xx_dclk1 = {
-	.name		= "dclk1",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
-	.enable		= s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-static struct clk_ops clkout_ops = {
-	.set_parent	= s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_clkout0 = {
-	.name		= "clkout0",
-	.ops		= &clkout_ops,
-};
-
-struct clk s3c24xx_clkout1 = {
-	.name		= "clkout1",
-	.ops		= &clkout_ops,
-};
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
deleted file mode 100644
index d39d3c787580..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	/* ensure none of the special function bits set */
-	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long orig = clkslow;
-
-	if (enable)
-		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
-	else
-		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
-	__raw_writel(clkslow, S3C2410_CLKSLOW);
-
-	/* if we started the UPLL, then allow to settle */
-
-	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
-		udelay(200);
-
-	return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SPI,
-	}
-};
-
-static struct clk clk_lcd = {
-	.name		= "lcd",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_LCDC,
-};
-
-static struct clk clk_gpio = {
-	.name		= "gpio",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_GPIO,
-};
-
-static struct clk clk_usb_host = {
-	.name		= "usb-host",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBH,
-};
-
-static struct clk clk_usb_device = {
-	.name		= "usb-device",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBD,
-};
-
-static struct clk clk_timers = {
-	.name		= "timers",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_PWMT,
-};
-
-struct clk s3c24xx_clk_uart0 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.0",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART0,
-};
-
-struct clk s3c24xx_clk_uart1 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.1",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART1,
-};
-
-struct clk s3c24xx_clk_uart2 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.2",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART2,
-};
-
-static struct clk clk_rtc = {
-	.name		= "rtc",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_RTC,
-};
-
-static struct clk clk_watchdog = {
-	.name		= "watchdog",
-	.parent		= &clk_p,
-	.ctrlbit	= 0,
-};
-
-static struct clk clk_usb_bus_host = {
-	.name		= "usb-bus-host",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk clk_usb_bus_gadget = {
-	.name		= "usb-bus-gadget",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk *init_clocks[] = {
-	&clk_lcd,
-	&clk_gpio,
-	&clk_usb_host,
-	&clk_usb_device,
-	&clk_timers,
-	&s3c24xx_clk_uart0,
-	&s3c24xx_clk_uart1,
-	&s3c24xx_clk_uart2,
-	&clk_rtc,
-	&clk_watchdog,
-	&clk_usb_bus_host,
-	&clk_usb_bus_gadget,
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *xtal;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2410_upll_enable;
-
-	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
-		printk(KERN_ERR "failed to register usb bus clock\n");
-
-	/* register clocks from clock array */
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
-		struct clk *clkp = init_clocks[ptr];
-
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	/* show the clock-slow value */
-
-	xtal = clk_get(NULL, "xtal");
-
-	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
-	       print_mhz(clk_get_rate(xtal) /
-			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
-	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
-	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
-	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
-	return 0;
-}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c
deleted file mode 100644
index 11b3b28457bb..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2412.c
+++ /dev/null
@@ -1,761 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412,S3C2413 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-static int s3c2412_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2412_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
-	unsigned long orig = upllcon;
-
-	if (!enable)
-		upllcon |= S3C2412_PLLCON_OFF;
-	else
-		upllcon &= ~S3C2412_PLLCON_OFF;
-
-	__raw_writel(upllcon, S3C2410_UPLLCON);
-
-	/* allow ~150uS for the PLL to settle and lock */
-
-	if (enable && (orig & S3C2412_PLLCON_OFF))
-		udelay(150);
-
-	return 0;
-}
-
-/* clock selections */
-
-static struct clk clk_erefclk = {
-	.name		= "erefclk",
-};
-
-static struct clk clk_urefclk = {
-	.name		= "urefclk",
-};
-
-static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_urefclk)
-		clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
-	else if (parent == &clk_upll)
-		clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_usysclk = {
-	.name		= "usysclk",
-	.parent		= &clk_xtal,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_usysclk,
-	},
-};
-
-static struct clk clk_mrefclk = {
-	.name		= "mrefclk",
-	.parent		= &clk_xtal,
-};
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_xtal,
-};
-
-static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-	if (div > 2)
-		div = 2;
-
-	return parent_rate / div;
-}
-
-static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
-}
-
-static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_usbsrc(clk, rate);
-
-	if ((parent_rate / rate) == 2)
-		clkdivn |= S3C2412_CLKDIVN_USB48DIV;
-	else
-		clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_usbsrc = {
-	.name		= "usbsrc",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_usbsrc,
-		.set_rate	= s3c2412_setrate_usbsrc,
-		.round_rate	= s3c2412_roundrate_usbsrc,
-		.set_parent	= s3c2412_setparent_usbsrc,
-	},
-};
-
-static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_mdivclk)
-		clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_msysclk = {
-	.name		= "msysclk",
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_msysclk,
-	},
-};
-
-static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long flags;
-	unsigned long clkdiv;
-	unsigned long dvs;
-
-	/* Note, we current equate fclk andf msysclk for S3C2412 */
-
-	if (parent == &clk_msysclk || parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2412_CLKDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	/* update this under irq lockdown, clkdivn is not protected
-	 * by the clock system. */
-
-	local_irq_save(flags);
-
-	clkdiv  = __raw_readl(S3C2410_CLKDIVN);
-	clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
-	clkdiv |= dvs;
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk clk_armclk = {
-	.name		= "armclk",
-	.parent		= &clk_msysclk,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_armclk,
-	},
-};
-
-/* these next clocks have an divider immediately after them,
- * so we can register them with their divider and leave out the
- * intermediate clock stage
-*/
-static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations as they cancel out */
-
-	div = (rate / parent_rate);
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / div;
-}
-
-static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_uart(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_UARTDIV_MASK;
-	div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_uart = {
-	.name		= "uartclk",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_uart,
-		.set_rate	= s3c2412_setrate_uart,
-		.set_parent	= s3c2412_setparent_uart,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_i2s(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_I2SDIV_MASK;
-	div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_i2s = {
-	.name		= "i2sclk",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_i2s,
-		.set_rate	= s3c2412_setrate_i2s,
-		.set_parent	= s3c2412_setparent_i2s,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-static unsigned long s3c2412_getrate_cam(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_CAMDIV_MASK;
-	div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_cam = {
-	.name		= "camif-upll",	/* same as 2440 name */
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_cam,
-		.set_rate	= s3c2412_setrate_cam,
-		.set_parent	= s3c2412_setparent_cam,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SPI,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "dma.0",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA0,
-	}, {
-		.name		= "dma.1",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA1,
-	}, {
-		.name		= "dma.2",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA2,
-	}, {
-		.name		= "dma.3",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA3,
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBD,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART2,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= 0,
-	}, {
-		.name		= "usb-bus-gadget",
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_DEV48,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_HOST48,
-	}
-};
-
-/* clocks to add where we need to check their parentage */
-
-struct clk_init {
-	struct clk	*clk;
-	unsigned int	 bit;
-	struct clk	*src_0;
-	struct clk	*src_1;
-};
-
-static struct clk_init clks_src[] __initdata = {
-	{
-		.clk	= &clk_usysclk,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_urefclk,
-		.src_1	= &clk_upll,
-	}, {
-		.clk	= &clk_i2s,
-		.bit	= S3C2412_CLKSRC_I2SCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_cam,
-		.bit	= S3C2412_CLKSRC_CAMCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	}, {
-		.clk	= &clk_msysclk,
-		.bit	= S3C2412_CLKSRC_MSYSCLK_MPLL,
-		.src_0	= &clk_mdivclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_uart,
-		.bit	= S3C2412_CLKSRC_UARTCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_usbsrc,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	/* here we assume  OM[4] select xtal */
-	}, {
-		.clk	= &clk_erefclk,
-		.bit	= S3C2412_CLKSRC_EREFCLK_EXTCLK,
-		.src_0	= &clk_xtal,
-		.src_1	= &clk_ext,
-	}, {
-		.clk	= &clk_urefclk,
-		.bit	= S3C2412_CLKSRC_UREFCLK_EXTCLK,
-		.src_0	= &clk_xtal,
-		.src_1	= &clk_ext,
-	},
-};
-
-/* s3c2412_clk_initparents
- *
- * Initialise the parents for the clocks that we get at start-time
-*/
-
-static void __init s3c2412_clk_initparents(void)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-	struct clk_init *cip = clks_src;
-	struct clk *src;
-	int ptr;
-	int ret;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
-		ret = s3c24xx_register_clock(cip->clk);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       cip->clk->name, ret);
-		}
-
-		src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;
-
-		printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
-		clk_set_parent(cip->clk, src);
-	}
-}
-
-/* clocks to add straight away */
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_usb_bus,
-	&clk_mrefclk,
-	&clk_armclk,
-};
-
-static struct clk_lookup s3c2412_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk),
-};
-
-int __init s3c2412_baseclk_add(void)
-{
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	unsigned int dvs;
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2412_upll_enable;
-	clk_usb_bus.parent = &clk_usbsrc;
-	clk_usb_bus.rate = 0x0;
-
-	clk_f.parent = &clk_msysclk;
-
-	s3c2412_clk_initparents();
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* set the dvs state according to what we got at boot time */
-
-	dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
-
-	if (dvs)
-		clk_armclk.parent = &clk_h;
-
-	printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");
-
-		/* for the moment, let's use the UPLL, and see if we can
-		 * get 48MHz */
-
-		clk_set_parent(&clk_usysclk, &clk_upll);
-		clk_set_parent(&clk_usbsrc, &clk_usysclk);
-		clk_set_rate(&clk_usbsrc, 48*1000*1000);
-	}
-
-	printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
-	       print_mhz(clk_get_rate(&clk_upll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-
-	/* register clocks from clock array */
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		s3c2412_clkcon_enable(clkp, 0);
-	}
-
-	clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
-	return 0;
-}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
deleted file mode 100644
index d421a72920a5..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/clock.c
- *
- * Copyright (c) 2010 Simtec Electronics
- * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * S3C2416 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/pll.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-s3c2443-clock.h>
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[8] = {
-	[0] = 1,
-	[1] = 2,
-	[2] = 3,
-	[3] = 4,
-	[5] = 6,
-	[7] = 8,
-};
-
-static struct clksrc_clk hsspi_eplldiv = {
-	.clk = {
-		.name	= "hsspi-eplldiv",
-		.parent	= &clk_esysclk.clk,
-		.ctrlbit = (1 << 14),
-		.enable = s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
-};
-
-static struct clk *hsspi_sources[] = {
-	[0] = &hsspi_eplldiv.clk,
-	[1] = NULL, /* to fix */
-};
-
-static struct clksrc_clk hsspi_mux = {
-	.clk	= {
-		.name	= "hsspi-if",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = hsspi_sources,
-		.nr_sources = ARRAY_SIZE(hsspi_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
-};
-
-static struct clksrc_clk hsmmc_div[] = {
-	[0] = {
-		.clk = {
-			.name	= "hsmmc-div",
-			.devname	= "s3c-sdhci.0",
-			.parent	= &clk_esysclk.clk,
-		},
-		.reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
-	},
-	[1] = {
-		.clk = {
-			.name	= "hsmmc-div",
-			.devname	= "s3c-sdhci.1",
-			.parent	= &clk_esysclk.clk,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-	},
-};
-
-static struct clksrc_clk hsmmc_mux0 = {
-	.clk	= {
-		.name		= "hsmmc-if",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit	= (1 << 6),
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.sources	= &(struct clksrc_sources) {
-		.nr_sources	= 2,
-		.sources	= (struct clk * []) {
-			[0]	= &hsmmc_div[0].clk,
-			[1]	= NULL, /* to fix */
-		},
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
-};
-
-static struct clksrc_clk hsmmc_mux1 = {
-	.clk	= {
-		.name		= "hsmmc-if",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit	= (1 << 12),
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.sources	= &(struct clksrc_sources) {
-		.nr_sources	= 2,
-		.sources	= (struct clk * []) {
-			[0]	= &hsmmc_div[1].clk,
-			[1]	= NULL, /* to fix */
-		},
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
-};
-
-static struct clk hsmmc0_clk = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_h,
-	.enable		= s3c2443_clkcon_enable_h,
-	.ctrlbit	= S3C2416_HCLKCON_HSMMC0,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&hsspi_eplldiv,
-	&hsspi_mux,
-	&hsmmc_div[0],
-	&hsmmc_div[1],
-	&hsmmc_mux0,
-	&hsmmc_mux1,
-};
-
-static struct clk_lookup s3c2416_clk_lookup[] = {
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
-	/* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk),
-};
-
-void __init s3c2416_init_clocks(int xtal)
-{
-	u32 epllcon = __raw_readl(S3C2443_EPLLCON);
-	u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4);
-	int ptr;
-
-	/* s3c2416 EPLL compatible with s3c64xx */
-	clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1);
-
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c2443_common_init_clocks(xtal, s3c2416_get_pll,
-				   armdiv, ARRAY_SIZE(armdiv),
-				   S3C2416_CLKDIV0_ARMDIV_MASK);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	s3c24xx_register_clock(&hsmmc0_clk);
-	clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup));
-
-}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
deleted file mode 100644
index aaf006d1d6dc..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/regs-serial.h>
-
-/* S3C2440 extended clock support */
-
-static unsigned long s3c2440_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div = (parent_rate / rate) / 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2440_camif_upll_round(clk, rate);
-
-	camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
-
-	if (rate != parent_rate) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static unsigned long s3c2440_camif_upll_getrate(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL))
-		return parent_rate;
-
-	camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK;
-
-	return parent_rate / (camdivn + 1) / 2;
-}
-
-/* Extra S3C2440 clocks */
-
-static struct clk s3c2440_clk_cam = {
-	.name		= "camif",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_cam_upll = {
-	.name		= "camif-upll",
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2440_camif_upll_setrate,
-		.get_rate	= s3c2440_camif_upll_getrate,
-		.round_rate	= s3c2440_camif_upll_round,
-	},
-};
-
-static struct clk s3c2440_clk_ac97 = {
-	.name		= "ac97",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_AC97,
-};
-
-#define S3C24XX_VA_UART0      (S3C_VA_UART)
-#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
-#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
-#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
-
-static unsigned long  s3c2440_fclk_n_getrate(struct clk *clk)
-{
-	unsigned long ucon0, ucon1, ucon2, divisor;
-
-	/* the fun of calculating the uart divisors on the s3c2440 */
-	ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
-	ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
-	ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
-	ucon0 &= S3C2440_UCON0_DIVMASK;
-	ucon1 &= S3C2440_UCON1_DIVMASK;
-	ucon2 &= S3C2440_UCON2_DIVMASK;
-
-	if (ucon0 != 0)
-		divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
-	else if (ucon1 != 0)
-		divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
-	else if (ucon2 != 0)
-		divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
-	else
-		/* manual calims 44, seems to be 9 */
-		divisor = 9;
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static struct clk s3c2440_clk_fclk_n = {
-	.name		= "fclk_n",
-	.parent		= &clk_f,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2440_fclk_n_getrate,
-	},
-};
-
-static struct clk_lookup s3c2440_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
-	CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
-	CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
-	CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
-	CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
-};
-
-static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2440_clk_cam.parent = clock_h;
-	s3c2440_clk_ac97.parent = clock_p;
-	s3c2440_clk_cam_upll.parent = clock_upll;
-	s3c24xx_register_clock(&s3c2440_clk_fclk_n);
-
-	s3c24xx_register_clock(&s3c2440_clk_ac97);
-	s3c24xx_register_clock(&s3c2440_clk_cam);
-	s3c24xx_register_clock(&s3c2440_clk_cam_upll);
-	clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
-
-	clk_disable(&s3c2440_clk_ac97);
-	clk_disable(&s3c2440_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_clk_add,
-};
-
-static __init int s3c24xx_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c24xx_clk_init);
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
deleted file mode 100644
index 76cd31f7804e..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/clock.c
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2443 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-/* clock selections */
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[16] = {
-	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
-	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
-	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
-	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
-	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
-	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
-	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
-	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
-};
-
-/* hsspi
- *
- * high-speed spi clock, sourced from esysclk
-*/
-
-static struct clksrc_clk clk_hsspi = {
-	.clk	= {
-		.name		= "hsspi-if",
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-
-/* clk_hsmcc_div
- *
- * this clock is sourced from epll, and is fed through a divider,
- * to a mux controlled by sclkcon where either it or a extclk can
- * be fed to the hsmmc block
-*/
-
-static struct clksrc_clk clk_hsmmc_div = {
-	.clk	= {
-		.name		= "hsmmc-div",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-};
-
-static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
-
-	clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
-		    S3C2443_SCLKCON_HSMMCCLK_EPLL);
-
-	if (parent == &clk_epll)
-		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
-	else if (parent == &clk_ext)
-		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
-	else
-		return -EINVAL;
-
-	if (clk->usage > 0) {
-		__raw_writel(clksrc, S3C2443_SCLKCON);
-	}
-
-	clk->parent = parent;
-	return 0;
-}
-
-static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
-{
-	return s3c2443_setparent_hsmmc(clk, clk->parent);
-}
-
-static struct clk clk_hsmmc = {
-	.name		= "hsmmc-if",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_hsmmc_div.clk,
-	.enable		= s3c2443_enable_hsmmc,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2443_setparent_hsmmc,
-	},
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_SDI,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c2410-spi.0",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_SPI1,
-	}
-};
-
-/* clocks to add straight away */
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_hsspi,
-	&clk_hsmmc_div,
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_hsmmc,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk),
-};
-
-void __init s3c2443_init_clocks(int xtal)
-{
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	int ptr;
-
-	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll,
-				   armdiv, ARRAY_SIZE(armdiv),
-				   S3C2443_CLKDIV0_ARMDIV_MASK);
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c244x.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c
deleted file mode 100644
index 6d9b688c442b..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c244x.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440/S3C2442 Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long camdivn;
-	unsigned long dvs;
-
-	if (parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2440_CAMDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	camdivn  = __raw_readl(S3C2440_CAMDIVN);
-	camdivn &= ~S3C2440_CAMDIVN_DVSEN;
-	camdivn |= dvs;
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2440_setparent_armclk,
-	},
-};
-
-static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-	unsigned long clkdivn;
-	struct clk *clock_upll;
-	int ret;
-
-	printk("S3C244X: Clock Support, DVS %s\n",
-	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
-	clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
-
-	ret = s3c24xx_register_clock(&clk_arm);
-	if (ret < 0) {
-		printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
-		return ret;
-	}
-
-	clock_upll = clk_get(NULL, "upll");
-	if (IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
-		return -ENOENT;
-	}
-
-	/* check rate of UPLL, and if it is near 96MHz, then change
-	 * to using half the UPLL rate for the system */
-
-	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
-		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
-		spin_lock(&clocks_lock);
-
-		clkdivn = __raw_readl(S3C2410_CLKDIVN);
-		clkdivn |= S3C2440_CLKDIVN_UCLK;
-		__raw_writel(clkdivn, S3C2410_CLKDIVN);
-
-		spin_unlock(&clocks_lock);
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2440_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c2440_clk_init);
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
deleted file mode 100644
index 65d3eef73090..000000000000
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ /dev/null
@@ -1,675 +0,0 @@
-/*
- * Common code for SoCs starting with the S3C2443
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-
-
-static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
-{
-	u32 ctrlbit = clk->ctrlbit;
-	u32 con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
-}
-
-/* mpllref is a direct descendant of clk_xtal by default, but it is not
- * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
- * such directly equating the two source clocks is impossible.
- */
-static struct clk clk_mpllref = {
-	.name		= "mpllref",
-	.parent		= &clk_xtal,
-};
-
-static struct clk *clk_epllref_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpllref,
-	[2] = &clk_xtal,
-	[3] = &clk_ext,
-};
-
-struct clksrc_clk clk_epllref = {
-	.clk	= {
-		.name		= "epllref",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_epllref_sources,
-		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
-};
-
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
-
-static struct clk *clk_sysclk_sources[] = {
-	[0] = &clk_epllref.clk,
-	[1] = &clk_epll,
-};
-
-struct clksrc_clk clk_esysclk = {
-	.clk	= {
-		.name		= "esysclk",
-		.parent		= &clk_epll,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_sysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
-};
-
-static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
-
-	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
-	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
-
-	return parent_rate / (div + 1);
-}
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_mpllref,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_getrate_mdivclk,
-	},
-};
-
-static struct clk *clk_msysclk_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpll,
-	[2] = &clk_mdivclk,
-	[3] = &clk_mpllref,
-};
-
-static struct clksrc_clk clk_msysclk = {
-	.clk	= {
-		.name		= "msysclk",
-		.parent		= &clk_xtal,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_msysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
-};
-
-/* prediv
- *
- * this divides the msysclk down to pass to h/p/etc.
- */
-
-static unsigned long s3c2443_prediv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
-	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk clk_prediv = {
-	.name		= "prediv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_prediv_getrate,
-	},
-};
-
-/* hclk divider
- *
- * divides the prediv and provides the hclk.
- */
-
-static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_h_ops = {
-	.get_rate	= s3c2443_hclkdiv_getrate,
-};
-
-/* pclk divider
- *
- * divides the hclk and provides the pclk.
- */
-
-static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0);
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_p_ops = {
-	.get_rate	= s3c2443_pclkdiv_getrate,
-};
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
-*/
-
-static unsigned int *armdiv;
-static int nr_armdiv;
-static int armdivmask;
-
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned best = 256; /* bigger than any value */
-	unsigned div;
-	int ptr;
-
-	if (!nr_armdiv)
-		return -EINVAL;
-
-	for (ptr = 0; ptr < nr_armdiv; ptr++) {
-		div = armdiv[ptr];
-		if (div) {
-			/* cpufreq provides 266mhz as 266666000 not 266666666 */
-			calc = (parent / div / 1000) * 1000;
-			if (calc <= rate && div < best)
-				best = div;
-		}
-	}
-
-	return parent / best;
-}
-
-static unsigned long s3c2443_armclk_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkcon0;
-	int val;
-
-	if (!nr_armdiv || !armdivmask)
-		return -EINVAL;
-
-	clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-	clkcon0 &= armdivmask;
-	val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
-
-	return rate / armdiv[val];
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned div;
-	unsigned best = 256; /* bigger than any value */
-	int ptr;
-	int val = -1;
-
-	if (!nr_armdiv || !armdivmask)
-		return -EINVAL;
-
-	for (ptr = 0; ptr < nr_armdiv; ptr++) {
-		div = armdiv[ptr];
-		if (div) {
-			/* cpufreq provides 266mhz as 266666000 not 266666666 */
-			calc = (parent / div / 1000) * 1000;
-			if (calc <= rate && div < best) {
-				best = div;
-				val = ptr;
-			}
-		}
-	}
-
-	if (val >= 0) {
-		unsigned long clkcon0;
-
-		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= ~armdivmask;
-		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
-		__raw_writel(clkcon0, S3C2443_CLKDIV0);
-	}
-
-	return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
-	.name		= "armdiv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.round_rate = s3c2443_armclk_roundrate,
-		.get_rate = s3c2443_armclk_getrate,
-		.set_rate = s3c2443_armclk_setrate,
-	},
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
-	[0] = &clk_armdiv,
-	[1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
-	.clk	= {
-		.name		= "armclk",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_arm_sources,
-		.nr_sources = ARRAY_SIZE(clk_arm_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
-/* usbhost
- *
- * usb host bus-clock, usually 48MHz to provide USB bus clock timing
-*/
-
-static struct clksrc_clk clk_usb_bus_host = {
-	.clk	= {
-		.name		= "usb-bus-host-parent",
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-/* common clksrc clocks */
-
-static struct clksrc_clk clksrc_clks[] = {
-	{
-		/* camera interface bus-clock, divided down from esysclk */
-		.clk	= {
-			.name		= "camif-upll",	/* same as 2440 name */
-			.parent		= &clk_esysclk.clk,
-			.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
-			.enable		= s3c2443_clkcon_enable_s,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
-	}, {
-		.clk	= {
-			.name		= "display-if",
-			.parent		= &clk_esysclk.clk,
-			.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
-			.enable		= s3c2443_clkcon_enable_s,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
-	},
-};
-
-static struct clksrc_clk clk_esys_uart = {
-	/* ART baud-rate clock sourced from esysclk via a divisor */
-	.clk	= {
-		.name		= "uartclk",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
-};
-
-static struct clk clk_i2s_ext = {
-	.name		= "i2s-ext",
-};
-
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
-	.clk	= {
-		.name		= "i2s-eplldiv",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-static struct clk *clk_i2s_srclist[] = {
-	[0] = &clk_i2s_eplldiv.clk,
-	[1] = &clk_i2s_ext,
-	[2] = &clk_epllref.clk,
-	[3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
-	.clk	= {
-		.name		= "i2s-if",
-		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_i2s_srclist,
-		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIS,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIC,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "dma.0",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA0,
-	}, {
-		.name		= "dma.1",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA1,
-	}, {
-		.name		= "dma.2",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA2,
-	}, {
-		.name		= "dma.3",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA3,
-	}, {
-		.name		= "dma.4",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA4,
-	}, {
-		.name		= "dma.5",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA5,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBD,
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_LCDC,
-
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_PWMT,
-	}, {
-		.name		= "cfc",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_CFC,
-	}, {
-		.name		= "ssmc",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_SSMC,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART2,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.3",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART3,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_WDT,
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_AC97,
-	}, {
-		.name		= "nand",
-		.parent		= &clk_h,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus_host.clk,
-	}
-};
-
-static struct clk hsmmc1_clk = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_h,
-	.enable		= s3c2443_clkcon_enable_h,
-	.ctrlbit	= S3C2443_HCLKCON_HSMMC,
-};
-
-static struct clk hsspi_clk = {
-	.name		= "spi",
-	.devname	= "s3c2443-spi.0",
-	.parent		= &clk_p,
-	.enable		= s3c2443_clkcon_enable_p,
-	.ctrlbit	= S3C2443_PCLKCON_HSSPI,
-};
-
-/* EPLLCON compatible enough to get on/off information */
-
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
-{
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long pll;
-	int ptr;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	pll = get_mpll(mpllcon, xtal);
-	clk_msysclk.clk.rate = pll;
-	clk_mpll.rate = pll;
-
-	printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
-	       (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
-	       print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)),
-	       print_mhz(clk_get_rate(&clk_h)),
-	       print_mhz(clk_get_rate(&clk_p)));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
-		s3c_set_clksrc(&clksrc_clks[ptr], true);
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
-		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
-	}
-
-	printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
-	       print_mhz(clk_get_rate(&clk_epll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_prediv,
-	&clk_mpllref,
-	&clk_mdivclk,
-	&clk_ext,
-	&clk_epll,
-	&clk_usb_bus,
-	&clk_armdiv,
-	&hsmmc1_clk,
-	&hsspi_clk,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_i2s_eplldiv,
-	&clk_i2s,
-	&clk_usb_bus_host,
-	&clk_epllref,
-	&clk_esysclk,
-	&clk_msysclk,
-	&clk_arm,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk),
-};
-
-void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       unsigned int *divs, int nr_divs,
-				       int divmask)
-{
-	int ptr;
-
-	armdiv = divs;
-	nr_armdiv = nr_divs;
-	armdivmask = divmask;
-
-	/* s3c2443 parents h clock from prediv */
-	clk_h.parent = &clk_prediv;
-	clk_h.ops = &clk_h_ops;
-
-	/* and p clock from h clock */
-	clk_p.parent = &clk_h;
-	clk_p.ops = &clk_p_ops;
-
-	clk_usb_bus.parent = &clk_usb_bus_host.clk;
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	/* See s3c2443/etc notes on disabling clocks at init time */
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-
-	s3c2443_common_setup_clocks(get_mpll);
-}
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 4adaa4b43ffe..c0763b837745 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
@@ -44,7 +45,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
@@ -53,6 +53,7 @@
 #include <plat/cpu-freq.h>
 #include <plat/pll.h>
 #include <plat/pwm-core.h>
+#include <plat/watchdog-reset.h>
 
 #include "common.h"
 
@@ -73,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32410000,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
 		.init		= s3c2410_init,
 		.name		= name_s3c2410
@@ -82,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32410002,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
 		.init		= s3c2410a_init,
 		.name		= name_s3c2410a
@@ -91,7 +90,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440000,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2440_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
 		.name		= name_s3c2440
@@ -100,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2440_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
 		.name		= name_s3c2440a
@@ -109,7 +106,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440aaa,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2442_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
 		.name		= name_s3c2442
@@ -118,7 +114,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440aab,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2442_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
 		.name		= name_s3c2442b
@@ -127,7 +122,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32412001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
 		.init_uarts	= s3c2412_init_uarts,
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
@@ -136,7 +130,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32412003,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
 		.init_uarts	= s3c2412_init_uarts,
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
@@ -145,7 +138,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32450003,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2416_map_io,
-		.init_clocks	= s3c2416_init_clocks,
 		.init_uarts	= s3c2416_init_uarts,
 		.init		= s3c2416_init,
 		.name		= name_s3c2416,
@@ -154,7 +146,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32443001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2443_map_io,
-		.init_clocks	= s3c2443_init_clocks,
 		.init_uarts	= s3c2443_init_uarts,
 		.init		= s3c2443_init,
 		.name		= name_s3c2443,
@@ -240,7 +231,6 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 	} else {
 		samsung_cpu_id = s3c24xx_read_idcode_v4();
 	}
-	s3c24xx_init_cpu();
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 
@@ -317,21 +307,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
 	},
 };
 
-/* initialise all the clocks */
-
-void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
-					   unsigned long hclk,
-					   unsigned long pclk)
-{
-	clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
-					clk_xtal.rate);
-
-	clk_mpll.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-}
-
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
 	defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 static struct resource s3c2410_dma_resource[] = {
@@ -484,7 +459,7 @@ struct platform_device s3c2440_device_dma = {
 };
 #endif
 
-#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416)
+#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
 static struct resource s3c2443_dma_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
 	[1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
@@ -535,3 +510,62 @@ struct platform_device s3c2443_device_dma = {
 	},
 };
 #endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410)
+void __init s3c2410_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+void __init s3c2412_init_clocks(int xtal)
+{
+	s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+void __init s3c2416_init_clocks(int xtal)
+{
+	s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440)
+void __init s3c2440_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442)
+void __init s3c2442_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+void __init s3c2443_init_clocks(int xtal)
+{
+	s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \
+	defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dclk_resource[] = {
+	[0] = DEFINE_RES_MEM(0x56000084, 0x4),
+};
+
+struct platform_device s3c2410_device_dclk = {
+	.name		= "s3c2410-dclk",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dclk_resource),
+	.resource	= s3c2410_dclk_resource,
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index e46c10417216..ac3ff12a0601 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -67,16 +67,15 @@ extern struct syscore_ops s3c2416_irq_syscore_ops;
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 extern void s3c244x_map_io(void);
 extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c244x_init_clocks(int xtal);
 extern void s3c244x_restart(enum reboot_mode mode, const char *cmd);
 #else
-#define s3c244x_init_clocks NULL
 #define s3c244x_init_uarts NULL
 #endif
 
 #ifdef CONFIG_CPU_S3C2440
 extern  int s3c2440_init(void);
 extern void s3c2440_map_io(void);
+extern void s3c2440_init_clocks(int xtal);
 extern void s3c2440_init_irq(void);
 #else
 #define s3c2440_init NULL
@@ -86,6 +85,7 @@ extern void s3c2440_init_irq(void);
 #ifdef CONFIG_CPU_S3C2442
 extern  int s3c2442_init(void);
 extern void s3c2442_map_io(void);
+extern void s3c2442_init_clocks(int xtal);
 extern void s3c2442_init_irq(void);
 #else
 #define s3c2442_init NULL
@@ -114,4 +114,21 @@ extern struct platform_device s3c2412_device_dma;
 extern struct platform_device s3c2440_device_dma;
 extern struct platform_device s3c2443_device_dma;
 
+extern struct platform_device s3c2410_device_dclk;
+
+#ifdef CONFIG_S3C2410_COMMON_CLK
+void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *reg_base);
+#endif
+#ifdef CONFIG_S3C2412_COMMON_CLK
+void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
+				unsigned long ext_f, void __iomem *reg_base);
+#endif
+#ifdef CONFIG_S3C2443_COMMON_CLK
+void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *reg_base);
+#endif
+
 #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c
index 2a0aa5684e72..d4d9514335f4 100644
--- a/arch/arm/mach-s3c24xx/cpufreq-utils.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c
@@ -14,6 +14,7 @@
 #include <linux/errno.h>
 #include <linux/cpufreq.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
@@ -60,5 +61,6 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
  */
 void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
 {
-	__raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON);
+	if (!IS_ERR(cfg->mpll))
+		clk_set_rate(cfg->mpll, cfg->pll.frequency);
 }
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c
index 30aa53ff07a6..09aa12da1789 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
@@ -23,7 +24,6 @@
 #include <plat/cpu.h>
 #include <plat/dma-s3c24xx.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c
index b7e094671522..0c0106d1a4d1 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <mach/dma.h>
@@ -23,7 +24,6 @@
 #include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c
index cd25de28804c..2f8e8a3017df 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
@@ -23,7 +24,6 @@
 #include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index 95b9f759fe97..f4096ec0700a 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <mach/dma.h>
@@ -23,7 +24,6 @@
 #include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-dma.h>
 #include <mach/regs-lcd.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
deleted file mode 100644
index 2558952e3147..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Copyright (C) 2005 Simtec Electronics
- *
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
-
-#define S3C2410_UART1_OFF (0x4000)
-#define SHIFT_2440TXF (14-9)
-
-	.macro addruart, rp, rv, tmp
-		ldr	\rp, = S3C24XX_PA_UART
-		ldr	\rv, = S3C24XX_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-	.macro fifo_full_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	1004f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-1004:
-		ldr	\rd, [\rx, # S3C2410_UFSTAT]
-		moveq	\rd, \rd, lsr #SHIFT_2440TXF
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-	.macro  fifo_full_s3c2410 rd, rx
-		ldr	\rd, [\rx, # S3C2410_UFSTAT]
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-/* fifo level reading */
-
-	.macro fifo_level_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	10000f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-
-10000:
-		ldr	\rd, [\rx, # S3C2410_UFSTAT]
-		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
-	.endm
-
-	.macro fifo_level_s3c2410 rd, rx
-		ldr	\rd, [\rx, # S3C2410_UFSTAT]
-		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-	.endm
-
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
-#define fifo_full  fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
-#define fifo_full  fifo_full_s3c24xx
-#define fifo_level fifo_level_s3c24xx
-#endif
-
-/* include the reset of the code which will do the work */
-
-#include <debug/samsung.S>
diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h
index a6cc14a092fc..dedd3837c193 100644
--- a/arch/arm/mach-s3c24xx/include/mach/hardware.h
+++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/hardware.h
- *
+/*
  * Copyright (c) 2003 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -17,20 +16,9 @@
 
 extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
 
-#ifdef CONFIG_CPU_S3C2440
-
-extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
-
-#endif /* CONFIG_CPU_S3C2440 */
-
 #endif /* __ASSEMBLY__ */
 
 #include <asm/sizes.h>
 #include <mach/map.h>
 
-/* machine specific hardware definitions should go after this */
-
-/* currently here until moved into config (todo) */
-#define CONFIG_NO_MULTIWORD_IO
-
 #endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
index 3415b60082d7..3db6c10de023 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
@@ -42,24 +42,6 @@
 #define S3C2410_CLKCON_IIS	     (1<<17)
 #define S3C2410_CLKCON_SPI	     (1<<18)
 
-/* DCLKCON register addresses in gpio.h */
-
-#define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
-#define S3C2410_DCLKCON_DCLK0_PCLK   (0<<1)
-#define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
-#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
-#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
-
-#define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
-#define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
-#define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
-#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
-#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
-
 #define S3C2410_CLKDIVN_PDIVN	     (1<<0)
 #define S3C2410_CLKDIVN_HDIVN	     (1<<1)
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
index c2ef016032ab..c6583cfa5835 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
@@ -457,9 +457,6 @@
 
 /* miscellaneous control */
 #define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
-#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
-
-#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
 
 /* see clock.h for dclk definitions */
 
diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h
index 7b542f7b7938..4d5f5768f700 100644
--- a/arch/arm/plat-samsung/include/plat/rtc-core.h
+++ b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h
- *
+/*
  * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
  *
  * Samsung RTC Controller core functions
@@ -9,19 +8,19 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_PLAT_RTC_CORE_H
-#define __ASM_PLAT_RTC_CORE_H __FILE__
+#ifndef __RTC_CORE_H
+#define __RTC_CORE_H __FILE__
 
 /* These functions are only for use with the core support code, such as
  * the cpu specific initialisation code
  */
 
+extern struct platform_device s3c_device_rtc;
+
 /* re-define device name depending on support. */
 static inline void s3c_rtc_setname(char *name)
 {
-#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
 	s3c_device_rtc.name = name;
-#endif
 }
 
-#endif /* __ASM_PLAT_RTC_CORE_H */
+#endif /* __RTC_CORE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/tick.h b/arch/arm/mach-s3c24xx/include/mach/tick.h
deleted file mode 100644
index 544da41979db..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/tick.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C2410 - timer tick support
- */
-
-#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
-
-static inline int s3c24xx_ostimer_pending(void)
-{
-	return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
-}
diff --git a/arch/arm/mach-s3c24xx/include/mach/timex.h b/arch/arm/mach-s3c24xx/include/mach/timex.h
deleted file mode 100644
index fe9ca1ffd51b..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/uncompress.h b/arch/arm/mach-s3c24xx/include/mach/uncompress.h
deleted file mode 100644
index 7d2ce205dce8..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/uncompress.h
- *
- * Copyright (c) 2003-2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/regs-gpio.h>
-#include <mach/map.h>
-
-/* working in physical space... */
-#undef S3C2410_GPIOREG
-#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
-
-#include <plat/uncompress.h>
-
-static inline int is_arm926(void)
-{
-	unsigned int cpuid;
-
-	asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
-
-	return ((cpuid & 0xff0) == 0x260);
-}
-
-static void arch_detect_cpu(void)
-{
-	unsigned int cpuid;
-
-	cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
-	cpuid &= S3C2410_GSTATUS1_IDMASK;
-
-	if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
-	    cpuid == S3C2410_GSTATUS1_2442 ||
-	    cpuid == S3C2410_GSTATUS1_2416 ||
-	    cpuid == S3C2410_GSTATUS1_2450) {
-		fifo_mask = S3C2440_UFSTAT_TXMASK;
-		fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-	} else {
-		fifo_mask = S3C2410_UFSTAT_TXMASK;
-		fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
-	}
-
-	uart_base = (volatile u8 *) S3C_PA_UART +
-		(S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index 284ea1f44205..5157e250dd13 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -37,6 +37,7 @@
 #include <linux/platform_device.h>
 #include <linux/proc_fs.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -49,7 +50,6 @@
 #include <asm/mach-types.h>
 #include <mach/fb.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
@@ -161,11 +161,16 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 static void __init amlm5900_map_io(void)
 {
 	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init amlm5900_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 #ifdef CONFIG_FB_S3C2410
 static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
 	.width		= 160,
@@ -241,6 +246,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= amlm5900_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= amlm5900_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 2a16f8fb3584..e053581cab0b 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/i2c.h>
@@ -32,7 +33,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
@@ -46,7 +46,6 @@
 
 #include <net/ax88796.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
@@ -352,6 +351,7 @@ static struct platform_device anubis_device_sm501 = {
 /* Standard Anubis devices */
 
 static struct platform_device *anubis_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_adc,
@@ -364,14 +364,6 @@ static struct platform_device *anubis_devices[] __initdata = {
 	&anubis_device_sm501,
 };
 
-static struct clk *anubis_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 /* I2C devices. */
 
 static struct i2c_board_info anubis_i2c_devs[] __initdata = {
@@ -394,23 +386,7 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
 
 static void __init anubis_map_io(void)
 {
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
-
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -428,6 +404,12 @@ static void __init anubis_map_io(void)
 	}
 }
 
+static void __init anubis_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init anubis_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -447,6 +429,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= anubis_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 6beab674c147..9db768f448a5 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/dm9000.h>
 #include <linux/platform_device.h>
 
@@ -33,7 +34,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
@@ -45,7 +45,6 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/mmc-s3cmci.h>
@@ -192,11 +191,16 @@ static struct platform_device *at2440evb_devices[] __initdata = {
 static void __init at2440evb_map_io(void)
 {
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
-	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init at2440evb_init_time(void)
+{
+	s3c2440_init_clocks(16934400);
+	samsung_timer_init();
+}
+
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
@@ -213,6 +217,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= at2440evb_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 981ba1eb9fdc..f9112b801a33 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/dm9000.h>
 #include <linux/ata_platform.h>
@@ -50,12 +51,10 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "bast.h"
@@ -523,6 +522,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = {
 // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
@@ -537,14 +537,6 @@ static struct platform_device *bast_devices[] __initdata = {
 	&bast_sio,
 };
 
-static struct clk *bast_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 static struct s3c_cpufreq_board __initdata bast_cpufreq = {
 	.refresh	= 7800, /* 7.8usec */
 	.auto_io	= 1,
@@ -558,29 +550,19 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
 
 static void __init bast_map_io(void)
 {
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
-
 	s3c_hwmon_set_platdata(&bast_hwmon_info);
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init bast_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init bast_init(void)
 {
 	register_syscore_ops(&bast_pm_syscore_ops);
@@ -608,6 +590,6 @@ MACHINE_START(BAST, "Simtec-BAST")
 	.map_io		= bast_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= bast_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= bast_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index d9170e9f8ccd..fc3a08d0cb3f 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -35,6 +35,7 @@
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -81,7 +82,6 @@
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"
@@ -196,7 +196,7 @@ static void gta02_charger_worker(struct work_struct *work)
 	 * If the PCF50633 ADC is disabled we fallback to a
 	 * 100mA limit for safety.
 	 */
-	pcf50633_mbc_usb_curlim_set(pcf, 100);
+	pcf50633_mbc_usb_curlim_set(gta02_pcf, 100);
 #endif
 }
 
@@ -501,7 +501,6 @@ static struct platform_device gta02_buttons_device = {
 static void __init gta02_map_io(void)
 {
 	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
@@ -585,6 +584,11 @@ static void __init gta02_machine_init(void)
 	regulator_has_full_constraints();
 }
 
+static void __init gta02_init_time(void)
+{
+	s3c2442_init_clocks(12000000);
+	samsung_timer_init();
+}
 
 MACHINE_START(NEO1973_GTA02, "GTA02")
 	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
@@ -592,6 +596,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c2442_init_irq,
 	.init_machine	= gta02_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= gta02_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index de0832181d8c..fbf5487ae5d1 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -56,13 +57,11 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"
@@ -646,7 +645,6 @@ static struct platform_device *h1940_devices[] __initdata = {
 static void __init h1940_map_io(void)
 {
 	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -662,6 +660,12 @@ static void __init h1940_map_io(void)
 	WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
 }
 
+static void __init h1940_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /* H1940 and RX3715 need to reserve this for suspend */
 static void __init h1940_reserve(void)
 {
@@ -739,6 +743,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.reserve	= h1940_reserve,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= h1940_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= h1940_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 67cb8e948b7e..e81ea82c55f9 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 
@@ -31,7 +32,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
@@ -507,11 +507,16 @@ static struct syscore_ops jive_pm_syscore_ops = {
 static void __init jive_map_io(void)
 {
 	s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init jive_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void jive_power_off(void)
 {
 	printk(KERN_INFO "powering system down...\n");
@@ -665,6 +670,6 @@ MACHINE_START(JIVE, "JIVE")
 	.init_irq	= s3c2412_init_irq,
 	.map_io		= jive_map_io,
 	.init_machine	= jive_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= jive_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 1f1559713d8b..5cc40ec1d254 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -23,6 +23,7 @@
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/dm9000.h>
 #include <linux/platform_data/at24.h>
 #include <linux/platform_device.h>
@@ -37,7 +38,6 @@
 #include <mach/fb.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-lcd.h>
@@ -54,7 +54,6 @@
 #include <linux/mtd/partitions.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -525,11 +524,16 @@ static struct platform_device *mini2440_devices[] __initdata = {
 static void __init mini2440_map_io(void)
 {
 	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init mini2440_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /*
  * mini2440_features string
  *
@@ -690,6 +694,6 @@ MACHINE_START(MINI2440, "MINI2440")
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= mini2440_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 997684f17930..3ac2a54348d6 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/timer.h>
 #include <linux/io.h>
 #include <linux/mmc/host.h>
@@ -43,9 +44,7 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/regs-serial.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <linux/platform_data/mmc-s3cmci.h>
@@ -535,11 +534,16 @@ static void __init n30_map_io(void)
 {
 	s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
 	n30_hwinit();
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init n30_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /* GPB3 is the line that controls the pull-up for the USB D+ line */
 
 static void __init n30_init(void)
@@ -591,7 +595,7 @@ MACHINE_START(N30, "Acer-N30")
 				Ben Dooks <ben-linux@fluff.org>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= samsung_timer_init,
+	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
@@ -602,7 +606,7 @@ MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= samsung_timer_init,
+	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 575d28c9e6c6..c82c281ce351 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -21,6 +21,7 @@
 #include <linux/gpio.h>
 #include <linux/string.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -38,11 +39,9 @@
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -135,13 +134,18 @@ static void __init nexcoder_sensorboard_init(void)
 static void __init nexcoder_map_io(void)
 {
 	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	nexcoder_sensorboard_init();
 }
 
+static void __init nexcoder_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init nexcoder_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -154,6 +158,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= nexcoder_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index f84f2a4c0c6d..189147b80eca 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -18,6 +18,7 @@
 #include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/clk.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
@@ -39,12 +40,10 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include <mach/hardware.h>
@@ -344,20 +343,13 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 /* Standard Osiris devices */
 
 static struct platform_device *osiris_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_i2c0,
 	&s3c_device_wdt,
 	&s3c_device_nand,
 	&osiris_pcmcia,
 };
 
-static struct clk *osiris_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
 	.refresh	= 7800, /* refresh period is 7.8usec */
 	.auto_io	= 1,
@@ -368,23 +360,7 @@ static void __init osiris_map_io(void)
 {
 	unsigned long flags;
 
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
-
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -408,6 +384,12 @@ static void __init osiris_map_io(void)
 	local_irq_restore(flags);
 }
 
+static void __init osiris_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init osiris_init(void)
 {
 	register_syscore_ops(&osiris_pm_syscore_ops);
@@ -429,6 +411,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= osiris_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= osiris_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index 7e16b0740ec1..45833001186d 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -15,6 +15,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -29,10 +30,8 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"
@@ -100,11 +99,16 @@ static struct platform_device *otom11_devices[] __initdata = {
 static void __init otom11_map_io(void)
 {
 	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init otom11_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init otom11_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -117,6 +121,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
 	.init_irq	= s3c2410_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= otom11_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index b534b76812e3..228c9094519d 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -31,6 +31,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
 #include <linux/io.h>
@@ -49,7 +50,6 @@
 
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-lcd.h>
-#include <plat/regs-serial.h>
 #include <mach/fb.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
@@ -304,11 +304,16 @@ __setup("tft=", qt2410_tft_setup);
 static void __init qt2410_map_io(void)
 {
 	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
-	s3c24xx_init_clocks(12*1000*1000);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init qt2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init qt2410_machine_init(void)
 {
 	s3c_nand_set_platdata(&qt2410_nand_info);
@@ -346,6 +351,6 @@ MACHINE_START(QT2410, "QT2410")
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= qt2410_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= qt2410_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 0a5456cda1bc..e2c6541909c1 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -21,6 +21,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/device.h>
@@ -53,11 +54,9 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 #include <plat/gpio-cfg.h>
 
@@ -710,6 +709,7 @@ static struct i2c_board_info rx1950_i2c_devices[] = {
 };
 
 static struct platform_device *rx1950_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -728,20 +728,9 @@ static struct platform_device *rx1950_devices[] __initdata = {
 	&rx1950_leds,
 };
 
-static struct clk *rx1950_clocks[] __initdata = {
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-};
-
 static void __init rx1950_map_io(void)
 {
-	s3c24xx_clkout0.parent  = &clk_h;
-	s3c24xx_clkout1.parent  = &clk_f;
-
-	s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
-
 	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
-	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -754,6 +743,12 @@ static void __init rx1950_map_io(void)
 	s3c_pm_init();
 }
 
+static void __init rx1950_init_time(void)
+{
+	s3c2442_init_clocks(16934000);
+	samsung_timer_init();
+}
+
 static void __init rx1950_init_machine(void)
 {
 	int i;
@@ -816,6 +811,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.reserve	= rx1950_reserve,
 	.init_irq	= s3c2442_init_irq,
 	.init_machine = rx1950_init_machine,
-	.init_time	= samsung_timer_init,
+	.init_time	= rx1950_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index b36edce8b2b8..6e749ec3a2ea 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -23,6 +23,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/serial.h>
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
@@ -45,11 +46,9 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "common.h"
@@ -179,11 +178,16 @@ static struct platform_device *rx3715_devices[] __initdata = {
 static void __init rx3715_map_io(void)
 {
 	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
-	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init rx3715_init_time(void)
+{
+	s3c2440_init_clocks(16934000);
+	samsung_timer_init();
+}
+
 /* H1940 and RX3715 need to reserve this for suspend */
 static void __init rx3715_reserve(void)
 {
@@ -210,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.reserve	= rx3715_reserve,
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= rx3715_init_machine,
-	.init_time	= samsung_timer_init,
+	.init_time	= rx3715_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
index f50454a34f72..e4dcb9aa2ca2 100644
--- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
+++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
@@ -18,59 +18,24 @@
 #include <linux/clocksource.h>
 #include <linux/irqchip.h>
 #include <linux/of_platform.h>
-#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <asm/mach/arch.h>
 #include <mach/map.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 
 #include "common.h"
 
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the S3C2416 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART,
-				"s3c2440-uart.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000,
-				"s3c2440-uart.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000,
-				"s3c2440-uart.2", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000,
-				"s3c2440-uart.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0,
-				"s3c-sdhci.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1,
-				"s3c-sdhci.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC,
-				"s3c2440-i2c.0", NULL),
-	{},
-};
-
 static void __init s3c2416_dt_map_io(void)
 {
 	s3c24xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
 }
 
 static void __init s3c2416_dt_machine_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-				s3c2416_auxdata_lookup, NULL);
-
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	s3c_pm_init();
 }
 
@@ -86,6 +51,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
 	.map_io		= s3c2416_dt_map_io,
 	.init_irq	= irqchip_init,
 	.init_machine	= s3c2416_dt_machine_init,
-	 .init_time	= clocksource_of_init,
 	.restart	= s3c2416_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index a773789e4f38..419fadd6e446 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -35,6 +35,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -46,7 +47,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/devs.h>
@@ -99,11 +99,16 @@ static struct platform_device *smdk2410_devices[] __initdata = {
 static void __init smdk2410_map_io(void)
 {
 	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2410_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -118,6 +123,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= smdk2410_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2410_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index f5bc721217e3..fb3b80e44595 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -19,8 +19,10 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/memblock.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -33,7 +35,6 @@
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
@@ -93,24 +94,26 @@ static struct platform_device *smdk2413_devices[] __initdata = {
 	&s3c2412_device_dma,
 };
 
-static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
-				  struct meminfo *mi)
+static void __init smdk2413_fixup(struct tag *tags, char **cmdline)
 {
 	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
-		mi->nr_banks=1;
-		mi->bank[0].start = 0x30000000;
-		mi->bank[0].size = SZ_64M;
+		memblock_add(0x30000000, SZ_64M);
 	}
 }
 
 static void __init smdk2413_map_io(void)
 {
 	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2413_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
@@ -159,6 +162,6 @@ MACHINE_START(SMDK2413, "SMDK2413")
 	.init_irq	= s3c2412_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2413_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index 12023cae4378..fa6f30d23601 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -18,6 +18,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mtd/partitions.h>
@@ -34,7 +35,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-s3c2443-clock.h>
@@ -219,10 +219,15 @@ static struct platform_device *smdk2416_devices[] __initdata = {
 	&s3c2443_device_dma,
 };
 
+static void __init smdk2416_init_time(void)
+{
+	s3c2416_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2416_map_io(void)
 {
 	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
@@ -257,6 +262,6 @@ MACHINE_START(SMDK2416, "SMDK2416")
 	.init_irq	= s3c2416_init_irq,
 	.map_io		= smdk2416_map_io,
 	.init_machine	= smdk2416_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2416_init_time,
 	.restart	= s3c2416_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index de2e5d39a847..5fb89c0ae17a 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -20,6 +20,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -31,14 +32,12 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
 #include <mach/fb.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -159,11 +158,16 @@ static struct platform_device *smdk2440_devices[] __initdata = {
 static void __init smdk2440_map_io(void)
 {
 	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
-	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2440_init_time(void)
+{
+	s3c2440_init_clocks(16934400);
+	samsung_timer_init();
+}
+
 static void __init smdk2440_machine_init(void)
 {
 	s3c24xx_fb_set_platdata(&smdk2440_fb_info);
@@ -180,6 +184,6 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.init_irq	= s3c2440_init_irq,
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2440_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index d9933fcc6cc8..ef5d5ea33182 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -20,6 +20,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -31,7 +32,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
@@ -121,11 +121,16 @@ static struct platform_device *smdk2443_devices[] __initdata = {
 static void __init smdk2443_map_io(void)
 {
 	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2443_init_time(void)
+{
+	s3c2443_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2443_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -145,6 +150,6 @@ MACHINE_START(SMDK2443, "SMDK2443")
 	.init_irq	= s3c2443_init_irq,
 	.map_io		= smdk2443_map_io,
 	.init_machine	= smdk2443_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2443_init_time,
 	.restart	= s3c2443_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 7fad8f055cab..c616ca2d409e 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -33,6 +33,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -44,7 +45,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -135,11 +135,16 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
 static void __init tct_hammer_map_io(void)
 {
 	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init tct_hammer_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init tct_hammer_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -151,6 +156,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= tct_hammer_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= tct_hammer_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 755df489a45f..f88c584c3001 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -25,6 +25,7 @@
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -42,10 +43,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
 #include "bast.h"
@@ -286,6 +285,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
 /* devices for this board */
 
 static struct platform_device *vr1000_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
@@ -299,14 +299,6 @@ static struct platform_device *vr1000_devices[] __initdata = {
 	&vr1000_led3,
 };
 
-static struct clk *vr1000_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 static void vr1000_power_off(void)
 {
 	gpio_direction_output(S3C2410_GPB(9), 1);
@@ -314,29 +306,19 @@ static void vr1000_power_off(void)
 
 static void __init vr1000_map_io(void)
 {
-	/* initialise clock sources */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = NULL;
-	s3c24xx_dclk1.rate   = 3692307;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks));
-
 	pm_power_off = vr1000_power_off;
 
 	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init vr1000_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init vr1000_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -357,6 +339,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c2410_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= vr1000_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index f7ec9c550787..9104c2be36c9 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -16,12 +16,14 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
+#include <linux/memblock.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,7 +34,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
@@ -129,24 +130,26 @@ static struct platform_device *vstms_devices[] __initdata = {
 	&s3c2412_device_dma,
 };
 
-static void __init vstms_fixup(struct tag *tags, char **cmdline,
-			       struct meminfo *mi)
+static void __init vstms_fixup(struct tag *tags, char **cmdline)
 {
 	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
-		mi->nr_banks=1;
-		mi->bank[0].start = 0x30000000;
-		mi->bank[0].size = SZ_64M;
+		memblock_add(0x30000000, SZ_64M);
 	}
 }
 
 static void __init vstms_map_io(void)
 {
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init vstms_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init vstms_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -162,6 +165,6 @@ MACHINE_START(VSTMS, "VSTMS")
 	.init_irq	= s3c2412_init_irq,
 	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
-	.init_time	= samsung_timer_init,
+	.init_time	= vstms_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index 052ca23393a7..b19256ec8d40 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -33,9 +33,9 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-irq.h>
@@ -51,9 +51,6 @@
 #define PFX "s3c24xx-pm: "
 
 static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C2410_LOCKTIME),
-	SAVE_ITEM(S3C2410_CLKCON),
-
 	/* we restore the timings here, with the proviso that the board
 	 * brings the system up in an slower, or equal frequency setting
 	 * to the original system.
@@ -69,18 +66,6 @@ static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C2410_BANKCON3),
 	SAVE_ITEM(S3C2410_BANKCON4),
 	SAVE_ITEM(S3C2410_BANKCON5),
-
-#ifndef CONFIG_CPU_FREQ
-	SAVE_ITEM(S3C2410_CLKDIVN),
-	SAVE_ITEM(S3C2410_MPLLCON),
-	SAVE_ITEM(S3C2410_REFRESH),
-#endif
-	SAVE_ITEM(S3C2410_UPLLCON),
-	SAVE_ITEM(S3C2410_CLKSLOW),
-};
-
-static struct sleep_save misc_save[] = {
-	SAVE_ITEM(S3C2410_DCLKCON),
 };
 
 /* s3c_pm_check_resume_pin
@@ -140,12 +125,10 @@ void s3c_pm_configure_extint(void)
 void s3c_pm_restore_core(void)
 {
 	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
 }
 
 void s3c_pm_save_core(void)
 {
-	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
 	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
 }
 
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index ffb92cbca08c..7eab88829883 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -21,6 +21,7 @@
 #include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
@@ -37,7 +38,6 @@
 #include <plat/cpu-freq.h>
 
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -85,62 +85,6 @@ void __init s3c2410_map_io(void)
 
 void __init_or_cpufreq s3c2410_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-/* fake ARMCLK for use with cpufreq, etc. */
-
-static struct clk s3c2410_armclk = {
-	.name	= "armclk",
-	.parent	= &clk_f,
-	.id	= -1,
-};
-
-static struct clk_lookup s3c2410_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-};
-
-void __init s3c2410_init_clocks(int xtal)
-{
-	s3c24xx_register_baseclocks(xtal);
-	s3c2410_setup_clocks();
-	s3c2410_baseclk_add();
-	s3c24xx_register_clock(&s3c2410_armclk);
-	clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 
 struct bus_type s3c2410_subsys = {
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 0251650cbf80..d49f52fbc842 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -20,6 +20,7 @@
 #include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/reboot.h>
@@ -43,7 +44,6 @@
 #include <plat/nand-core.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
 
 #include "common.h"
@@ -173,49 +173,6 @@ void __init s3c2412_map_io(void)
 
 void __init_or_cpufreq s3c2412_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
-
-	clk_mpll.rate = fclk;
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
-	hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c2412_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c2412_setup_clocks();
-	s3c2412_baseclk_add();
 }
 
 /* need to register the subsystem before we actually register the device, and
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index 8e01b4f2df35..9fe260ae11e1 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -48,6 +48,7 @@
 #include <asm/system_misc.h>
 
 #include <mach/regs-s3c2443-clock.h>
+#include <mach/rtc-core.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -61,7 +62,6 @@
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
 #include <plat/adc-core.h>
-#include <plat/rtc-core.h>
 #include <plat/spi-core.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
index 2c8adc028538..fb9da2b603a2 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c24xx/s3c2442.c
@@ -53,117 +53,6 @@
 
 #include "common.h"
 
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-
-	if (div == 3)
-		return parent_rate / 3;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div /= 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2442_camif_upll_round(clk, rate);
-
-	camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
-	if (rate == parent_rate) {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
-	} else if ((parent_rate / rate) == 3) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
-	} else {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
-	.name		= "camif",
-	.id		= -1,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
-	.name		= "camif-upll",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2442_camif_upll_setrate,
-		.round_rate	= s3c2442_camif_upll_round,
-	},
-};
-
-static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2442_clk_cam.parent = clock_h;
-	s3c2442_clk_cam_upll.parent = clock_upll;
-
-	s3c24xx_register_clock(&s3c2442_clk_cam);
-	s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
-	clk_disable(&s3c2442_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
-
-
 static struct device s3c2442_dev = {
 	.bus		= &s3c2442_subsys,
 };
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c
index 886c2147062b..c7a804d0348e 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c24xx/s3c2443.c
@@ -34,6 +34,7 @@
 #include <asm/system_misc.h>
 
 #include <mach/regs-s3c2443-clock.h>
+#include <mach/rtc-core.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -43,7 +44,6 @@
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
 #include <plat/adc-core.h>
-#include <plat/rtc-core.h>
 #include <plat/spi-core.h>
 
 static struct map_desc s3c2443_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index 911b555029fc..4a64bcc9eb51 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -17,6 +17,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/device.h>
@@ -35,7 +36,6 @@
 #include <plat/cpu-freq.h>
 
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 
 #include <plat/clock.h>
@@ -46,6 +46,7 @@
 #include <plat/nand-core.h>
 #include <plat/watchdog-reset.h>
 
+#include "common.h"
 #include "regs-dsc.h"
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
@@ -74,67 +75,11 @@ void __init s3c244x_map_io(void)
 	s3c_nand_setname("s3c2440-nand");
 	s3c_device_ts.name = "s3c2440-ts";
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";
+	s3c2410_device_dclk.name = "s3c2440-dclk";
 }
 
 void __init_or_cpufreq s3c244x_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long clkdiv;
-	unsigned long camdiv;
-	unsigned long xtal;
-	unsigned long hclk, fclk, pclk;
-	int hdiv = 1;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
-	clkdiv = __raw_readl(S3C2410_CLKDIVN);
-	camdiv = __raw_readl(S3C2440_CAMDIVN);
-
-	/* work out clock scalings */
-
-	switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
-	case S3C2440_CLKDIVN_HDIVN_1:
-		hdiv = 1;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_2:
-		hdiv = 2;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_4_8:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_3_6:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
-		break;
-	}
-
-	hclk = fclk / hdiv;
-	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brief summary of clocks, etc */
-
-	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them, and to add new ones after the initialisation
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c244x_setup_clocks();
-	s3c2410_baseclk_add();
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 
 /* Since the S3C2442 and S3C2440 share items, put both subsystems here */
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
index dd47c8fa07fa..c9b91223697c 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S
+++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
@@ -25,13 +25,13 @@
 */
 
 #include <linux/linkage.h>
+#include <linux/serial_s3c.h>
 #include <asm/assembler.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
 
 #include "regs-mem.h"
 
diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S
index 7f378b662da6..d833d616bd2e 100644
--- a/arch/arm/mach-s3c24xx/sleep.S
+++ b/arch/arm/mach-s3c24xx/sleep.S
@@ -25,13 +25,13 @@
 */
 
 #include <linux/linkage.h>
+#include <linux/serial_s3c.h>
 #include <asm/assembler.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
 
 /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
  * reset the UART configuration, only enable if you really need this!
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 64f04e6f9c31..3136d86b0d6e 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -86,8 +86,7 @@ config MACH_SMDK6400
        bool "SMDK6400"
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_HSMMC
-	select S3C_DEV_NAND
+	select S3C_DEV_HSMMC1
 	help
 	  Machine support for the Samsung SMDK6400
 
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 76ab595d849b..5c45aae675b6 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
@@ -50,7 +51,6 @@
 #include <plat/irq-uart.h>
 #include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
-#include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index dd9ccca5de1f..c9b95325b672 100644
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -12,8 +12,8 @@
 
 /* pull in the relevant register and map files. */
 
+#include <linux/serial_s3c.h>
 #include <mach/map.h>
-#include <plat/regs-serial.h>
 
 	/* note, for the boot process to work we have to keep the UART
 	 * virtual address aligned to an 1MiB boundary for the L1
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index c0537f40a3d8..a30a1e3ffc6a 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -15,6 +15,8 @@
 #ifndef __MACH_S3C64XX_PM_CORE_H
 #define __MACH_S3C64XX_PM_CORE_H __FILE__
 
+#include <linux/serial_s3c.h>
+
 #include <mach/regs-gpio.h>
 
 static inline void s3c_pm_debug_init_uart(void)
diff --git a/arch/arm/mach-s3c64xx/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h
deleted file mode 100644
index db9c1b1d56a4..000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/tick.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-#include <linux/irqchip/arm-vic.h>
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_6400_TICK_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h
deleted file mode 100644
index fb2e8cd40829..000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c64xx/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/uncompress.h b/arch/arm/mach-s3c64xx/include/mach/uncompress.h
deleted file mode 100644
index 1c956738b42d..000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/uncompress.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-	fifo_mask = S3C2440_UFSTAT_TXMASK;
-	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-
-	uart_base = (volatile u8 *)S3C_PA_UART +
-		(S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index 1649c0d1c1b8..ae4ea7601f60 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -20,13 +20,13 @@
 #include <linux/syscore_ops.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/of.h>
 
 #include <mach/map.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
@@ -55,7 +55,13 @@ static struct irq_grp_save {
 	u32	mask;
 } eint_grp_save[5];
 
-static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+#ifndef CONFIG_SERIAL_SAMSUNG_UARTS
+#define SERIAL_SAMSUNG_UARTS 0
+#else
+#define	SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS
+#endif
+
+static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS];
 
 static int s3c64xx_irq_pm_suspend(void)
 {
@@ -66,7 +72,7 @@ static int s3c64xx_irq_pm_suspend(void)
 
 	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
 
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+	for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
 		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
 
 	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
@@ -87,7 +93,7 @@ static void s3c64xx_irq_pm_resume(void)
 
 	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
 
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+	for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
 		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
 
 	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index ddeb0e51a962..55eb6a69655b 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -20,6 +20,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -41,7 +42,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 7ccfef227c77..9c00d83f7151 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -401,4 +401,4 @@ static int __init wlf_gf_module_register(void)
 {
 	return i2c_add_driver(&wlf_gf_module_driver);
 }
-module_init(wlf_gf_module_register);
+device_initcall(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 3df3c372ee1f..4b0199fff9f5 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
 #include <linux/io.h>
@@ -51,7 +52,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/regs-serial.h>
 #include <plat/fb.h>
 #include <plat/sdhci.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 0431016925b9..72cee08c8bf5 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -33,7 +34,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/gpio-samsung.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 8d553a418e1c..9cbc07602ef3 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -22,6 +22,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/types.h>
 
 #include <asm/mach-types.h>
@@ -38,7 +39,6 @@
 #include <plat/fb.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/mmc-sdhci-s3c.h>
-#include <plat/regs-serial.h>
 #include <plat/sdhci.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
 
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 2067b0bf55b4..67f06a9ae656 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -16,6 +16,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -36,7 +37,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 5152026f0e19..fbad2af1ef16 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -23,6 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/types.h>
 
 #include <asm/mach-types.h>
@@ -38,7 +39,6 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/regs-serial.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include <video/platform_lcd.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 6e72bd5c1d0c..78dd6f73c072 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/spi/spi_gpio.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/platform_data/s3c-hsotg.h>
@@ -33,7 +34,6 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <linux/platform_data/hwmon-s3c.h>
-#include <plat/regs-serial.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/sdhci.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 150f55fb9e33..c85d1cbe769f 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -16,6 +16,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
@@ -29,8 +30,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <plat/regs-serial.h>
-
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 43261d24a0a5..c6a8b2ab0240 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
@@ -55,7 +56,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 #include <linux/platform_data/ata-samsung_cf.h>
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index b5a66986a529..6b37694fa335 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -332,7 +332,6 @@ static __init int s3c64xx_pm_initcall(void)
 {
 	pm_cpu_prep = s3c64xx_pm_prepare;
 	pm_cpu_sleep = s3c64xx_cpu_suspend;
-	pm_uart_udivslot = 1;
 
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
 	gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 3db0c98222f7..8c42807bf579 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
 
@@ -34,7 +35,6 @@
 #include <asm/irq.h>
 
 #include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 72b2278953a8..5be3f09bac92 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
 
@@ -35,7 +36,6 @@
 #include <asm/irq.h>
 
 #include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 42e14f2e7ca7..9a43be002d78 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
@@ -50,7 +51,6 @@
 #include <plat/gpio-cfg.h>
 #include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
-#include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
 
 #include "common.h"
@@ -205,6 +205,7 @@ void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
 	samsung_pwm_set_platdata(&s5p64x0_pwm_variant);
 }
 
+#ifdef CONFIG_CPU_S5P6440
 void __init s5p6440_map_io(void)
 {
 	/* initialize any device information early */
@@ -218,7 +219,9 @@ void __init s5p6440_map_io(void)
 
 	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
 }
+#endif
 
+#ifdef CONFIG_CPU_S5P6450
 void __init s5p6450_map_io(void)
 {
 	/* initialize any device information early */
@@ -232,13 +235,14 @@ void __init s5p6450_map_io(void)
 
 	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
 }
+#endif
 
 /*
  * s5p64x0_init_clocks
  *
  * register and setup the CPU clocks
  */
-
+#ifdef CONFIG_CPU_S5P6440
 void __init s5p6440_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -248,7 +252,9 @@ void __init s5p6440_init_clocks(int xtal)
 	s5p6440_register_clocks();
 	s5p6440_setup_clocks();
 }
+#endif
 
+#ifdef CONFIG_CPU_S5P6450
 void __init s5p6450_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -258,13 +264,14 @@ void __init s5p6450_init_clocks(int xtal)
 	s5p6450_register_clocks();
 	s5p6450_setup_clocks();
 }
+#endif
 
 /*
  * s5p64x0_init_irq
  *
  * register the CPU interrupts
  */
-
+#ifdef CONFIG_CPU_S5P6440
 void __init s5p6440_init_irq(void)
 {
 	/* S5P6440 supports 2 VIC */
@@ -279,7 +286,9 @@ void __init s5p6440_init_irq(void)
 
 	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
+#endif
 
+#ifdef CONFIG_CPU_S5P6450
 void __init s5p6450_init_irq(void)
 {
 	/* S5P6450 supports only 2 VIC */
@@ -294,6 +303,7 @@ void __init s5p6450_init_irq(void)
 
 	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
+#endif
 
 struct bus_type s5p64x0_subsys = {
 	.name		= "s5p64x0-core",
@@ -321,6 +331,7 @@ int __init s5p64x0_init(void)
 }
 
 /* uart registration process */
+#ifdef CONFIG_CPU_S5P6440
 void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
 	int uart;
@@ -332,11 +343,14 @@ void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
 }
+#endif
 
+#ifdef CONFIG_CPU_S5P6450
 void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
 	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
 }
+#endif
 
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
 
diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h
index f3a9b43cba4a..cbe7f3d731d0 100644
--- a/arch/arm/mach-s5p64x0/common.h
+++ b/arch/arm/mach-s5p64x0/common.h
@@ -25,10 +25,10 @@ void s5p6450_register_clocks(void);
 void s5p6450_setup_clocks(void);
 
 void s5p64x0_restart(enum reboot_mode mode, const char *cmd);
+extern  int s5p64x0_init(void);
 
 #ifdef CONFIG_CPU_S5P6440
 
-extern  int s5p64x0_init(void);
 extern void s5p6440_map_io(void);
 extern void s5p6440_init_clocks(int xtal);
 
@@ -38,12 +38,10 @@ extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 #define s5p6440_init_clocks NULL
 #define s5p6440_init_uarts NULL
 #define s5p6440_map_io NULL
-#define s5p64x0_init NULL
 #endif
 
 #ifdef CONFIG_CPU_S5P6450
 
-extern  int s5p64x0_init(void);
 extern void s5p6450_map_io(void);
 extern void s5p6450_init_clocks(int xtal);
 
@@ -53,7 +51,6 @@ extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 #define s5p6450_init_clocks NULL
 #define s5p6450_init_uarts NULL
 #define s5p6450_map_io NULL
-#define s5p64x0_init NULL
 #endif
 
 #endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
index 5e2916fb19a9..8759e7882bcb 100644
--- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -10,11 +10,10 @@
 
 /* pull in the relevant register and map files. */
 
+#include <linux/serial_s3c.h>
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-#include <plat/regs-serial.h>
-
 	.macro addruart, rp, rv, tmp
 		mov	\rp, #0xE0000000
 		orr	\rp, \rp, #0x00100000
diff --git a/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/arch/arm/mach-s5p64x0/include/mach/pm-core.h
index e52f7545d3aa..1e0eb65b2b82 100644
--- a/arch/arm/mach-s5p64x0/include/mach/pm-core.h
+++ b/arch/arm/mach-s5p64x0/include/mach/pm-core.h
@@ -12,6 +12,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/serial_s3c.h>
+
 #include <mach/regs-gpio.h>
 
 static inline void s3c_pm_debug_init_uart(void)
diff --git a/arch/arm/mach-s5p64x0/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h
deleted file mode 100644
index 4b91faa195a8..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/timex.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S5P64X0 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
deleted file mode 100644
index bbcc3f669ee3..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/uncompress.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	unsigned int chipid;
-
-	chipid = *(const volatile unsigned int __force *) 0xE0100118;
-
-	if ((chipid & 0xff000) == 0x50000)
-		uart_base = (volatile u8 *)S5P6450_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
-	else
-		uart_base = (volatile u8 *)S5P6440_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
-
-	fifo_mask = S3C2440_UFSTAT_TXMASK;
-	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c
index 3e6f2456ee9d..2ed921e095dc 100644
--- a/arch/arm/mach-s5p64x0/irq-pm.c
+++ b/arch/arm/mach-s5p64x0/irq-pm.c
@@ -14,9 +14,9 @@
 
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
-#include <plat/regs-serial.h>
 #include <plat/pm.h>
 
 #include <mach/regs-gpio.h>
@@ -34,7 +34,9 @@ static struct irq_grp_save {
 	u32	mask;
 } eint_grp_save[4];
 
+#ifdef CONFIG_SERIAL_SAMSUNG
 static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+#endif
 
 static int s5p64x0_irq_pm_suspend(void)
 {
@@ -45,8 +47,10 @@ static int s5p64x0_irq_pm_suspend(void)
 
 	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
 
+#ifdef CONFIG_SERIAL_SAMSUNG
 	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
 		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+#endif
 
 	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
 		grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4));
@@ -66,8 +70,10 @@ static void s5p64x0_irq_pm_resume(void)
 
 	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
 
+#ifdef CONFIG_SERIAL_SAMSUNG
 	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
 		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+#endif
 
 	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
 		__raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4));
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 9efdcc03df3b..6840e197cb2d 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -39,7 +40,6 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/regs-serial.h>
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index c3cacc067efe..fa1341c074ca 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -39,7 +40,6 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/regs-serial.h>
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
index 861e15cea691..ec8229cee716 100644
--- a/arch/arm/mach-s5p64x0/pm.c
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -161,7 +161,6 @@ static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif)
 {
 	pm_cpu_prep = s5p64x0_pm_prepare;
 	pm_cpu_sleep = s5p64x0_cpu_suspend;
-	pm_uart_udivslot = 1;
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index c5a8eeacf81c..6a41bf7dacf6 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
@@ -49,7 +50,6 @@
 #include <plat/onenand-core.h>
 #include <plat/pwm-core.h>
 #include <plat/spi-core.h>
-#include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index 66cb7f16bf2a..22c23859e45e 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -13,8 +13,8 @@
 
 /* pull in the relevant register and map files. */
 
+#include <linux/serial_s3c.h>
 #include <mach/map.h>
-#include <plat/regs-serial.h>
 
 	/* note, for the boot process to work we have to keep the UART
 	 * virtual address aligned to an 1MiB boundary for the L1
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
deleted file mode 100644
index 0af8e41230ed..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/tick.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S3C64XX - Timer tick support definitions
- *
- * Based on mach-s3c6400/include/mach/tick.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-#include <linux/irqchip/arm-vic.h>
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h
deleted file mode 100644
index 47ffb17aff96..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/uncompress.h b/arch/arm/mach-s5pc100/include/mach/uncompress.h
deleted file mode 100644
index 720e1339425c..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/uncompress.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/uncompress.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - uncompress code
- *
- * Based on mach-s3c6400/include/mach/uncompress.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-	fifo_mask = S3C2440_UFSTAT_TXMASK;
-	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-
-	uart_base = (volatile u8 *)S5P_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 9e256b9fc930..668af3ac31f3 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -16,6 +16,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -37,7 +38,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
 #include <plat/gpio-cfg.h>
 
 #include <plat/clock.h>
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index caaedafbbf5f..8c3abe521757 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -189,6 +189,7 @@ config MACH_TORBRECK
 	select S5PV210_SETUP_I2C1
 	select S5PV210_SETUP_I2C2
 	select S5PV210_SETUP_SDHCI
+	select SAMSUNG_DEV_IDE
 	help
 	  Machine support for aESOP Torbreck
 
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 26027a29b8a1..7024dcd0e40a 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -24,6 +24,7 @@
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <asm/proc-fns.h>
 #include <asm/mach/arch.h>
@@ -46,7 +47,6 @@
 #include <plat/pwm-core.h>
 #include <plat/tv-core.h>
 #include <plat/spi-core.h>
-#include <plat/regs-serial.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 80c21996c943..30b511a580aa 100644
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -12,8 +12,8 @@
 
 /* pull in the relevant register and map files. */
 
+#include <linux/serial_s3c.h>
 #include <mach/map.h>
-#include <plat/regs-serial.h>
 
 	/* note, for the boot process to work we have to keep the UART
 	 * virtual address aligned to an 1MiB boundary for the L1
diff --git a/arch/arm/mach-s5pv210/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h
deleted file mode 100644
index 73dc85496a83..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/timex.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/timex.h
- *
- * Copyright (c) 2003-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Based on arch/arm/mach-s5p6442/include/mach/timex.h
- *
- * S5PV210 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H __FILE__
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/uncompress.h b/arch/arm/mach-s5pv210/include/mach/uncompress.h
deleted file mode 100644
index 231cb07de058..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/uncompress.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/uncompress.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-	fifo_mask = S5PV210_UFSTAT_TXMASK;
-	fifo_max = 63 << S5PV210_UFSTAT_TXSHIFT;
-
-	uart_base = (volatile u8 *)S5P_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index ad40ab0f5dbd..cc37edacda26 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/fb.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -32,7 +33,6 @@
 #include <mach/regs-clock.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index e5cd9fbf19e9..c1ce921c4088 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/fb.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -39,7 +40,6 @@
 #include <mach/regs-clock.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
@@ -49,11 +49,6 @@
 #include <plat/clock.h>
 #include <plat/samsung-time.h>
 #include <plat/mfc.h>
-#include <plat/camport.h>
-
-#include <media/v4l2-mediabus.h>
-#include <media/s5p_fimc.h>
-#include <media/noon010pc30.h>
 
 #include "common.h"
 
@@ -239,14 +234,6 @@ static void __init goni_radio_init(void)
 
 /* TSP */
 static struct mxt_platform_data qt602240_platform_data = {
-	.x_line		= 17,
-	.y_line		= 11,
-	.x_size		= 800,
-	.y_size		= 480,
-	.blen		= 0x21,
-	.threshold	= 0x28,
-	.voltage	= 2800000,              /* 2.8V */
-	.orient		= MXT_DIAGONAL,
 	.irqflags	= IRQF_TRIGGER_FALLING,
 };
 
@@ -285,14 +272,6 @@ static void __init goni_tsp_init(void)
 /* USB OTG */
 static struct s3c_hsotg_plat goni_hsotg_pdata;
 
-static void goni_camera_init(void)
-{
-	s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
-
-	/* Set max driver strength on CAM_A_CLKOUT pin. */
-	s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
-}
-
 /* MAX8998 regulators */
 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
 
@@ -825,34 +804,6 @@ static void goni_setup_sdhci(void)
 	s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
 };
 
-static struct noon010pc30_platform_data noon010pc30_pldata = {
-	.clk_rate	= 16000000UL,
-	.gpio_nreset	= S5PV210_GPB(2), /* CAM_CIF_NRST */
-	.gpio_nstby	= S5PV210_GPB(0), /* CAM_CIF_NSTBY */
-};
-
-static struct i2c_board_info noon010pc30_board_info = {
-	I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
-	.platform_data = &noon010pc30_pldata,
-};
-
-static struct fimc_source_info goni_camera_sensors[] = {
-	{
-		.mux_id		= 0,
-		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
-				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.fimc_bus_type	= FIMC_BUS_TYPE_ITU_601,
-		.board_info	= &noon010pc30_board_info,
-		.i2c_bus_num	= 0,
-		.clk_frequency	= 16000000UL,
-	},
-};
-
-static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
-	.source_info	= goni_camera_sensors,
-	.num_clients	= ARRAY_SIZE(goni_camera_sensors),
-};
-
 /* Audio device */
 static struct platform_device goni_device_audio = {
 	.name = "smdk-audio",
@@ -874,10 +825,6 @@ static struct platform_device *goni_devices[] __initdata = {
 	&s5p_device_mixer,
 	&s5p_device_sdo,
 	&s3c_device_i2c0,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc_md,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
@@ -946,14 +893,8 @@ static void __init goni_machine_init(void)
 	/* FB */
 	s3c_fb_set_platdata(&goni_lcd_pdata);
 
-	/* FIMC */
-	s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
-			 &s5p_device_fimc_md);
-
 	s3c_hsotg_set_platdata(&goni_hsotg_pdata);
 
-	goni_camera_init();
-
 	/* SPI */
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 7c0ed07a78a3..448e1d2eeed6 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/i2c.h>
 #include <linux/device.h>
 
@@ -23,7 +24,6 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 
-#include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/ata-samsung_cf.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index f52cc15c2d85..2a6655fb63e7 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/device.h>
 #include <linux/dm9000.h>
 #include <linux/fb.h>
@@ -32,7 +33,6 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 
-#include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
 #include <plat/gpio-cfg.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 579afe89842a..157805529f26 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -22,7 +23,6 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 
-#include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/i2c-s3c2410.h>
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 8443a27bca2f..7dd894ece9ae 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -531,7 +531,7 @@ static void __init get_assabet_scr(void)
 }
 
 static void __init
-fixup_assabet(struct tag *tags, char **cmdline, struct meminfo *mi)
+fixup_assabet(struct tag *tags, char **cmdline)
 {
 	/* This must be done before any call to machine_has_neponset() */
 	map_sa1100_gpio_regs();
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 831a15824ec8..f9874ba60cc8 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -43,6 +43,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
+#include <asm/mach/irda.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
@@ -96,6 +97,37 @@ static struct mcp_plat_data collie_mcp_data = {
 	.codec_pdata	= &collie_ucb1x00_data,
 };
 
+static int collie_ir_startup(struct device *dev)
+{
+	int rc = gpio_request(COLLIE_GPIO_IR_ON, "IrDA");
+	if (rc)
+		return rc;
+	rc = gpio_direction_output(COLLIE_GPIO_IR_ON, 1);
+
+	if (!rc)
+		return 0;
+
+	gpio_free(COLLIE_GPIO_IR_ON);
+	return rc;
+}
+
+static void collie_ir_shutdown(struct device *dev)
+{
+	gpio_free(COLLIE_GPIO_IR_ON);
+}
+
+static int collie_ir_set_power(struct device *dev, unsigned int state)
+{
+	gpio_set_value(COLLIE_GPIO_IR_ON, !state);
+	return 0;
+}
+
+static struct irda_platform_data collie_ir_data = {
+	.startup = collie_ir_startup,
+	.shutdown = collie_ir_shutdown,
+	.set_power = collie_ir_set_power,
+};
+
 /*
  * Collie AC IN
  */
@@ -400,6 +432,7 @@ static void __init collie_init(void)
 	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
 			    ARRAY_SIZE(collie_flash_resources));
 	sa11x0_register_mcp(&collie_mcp_data);
+	sa11x0_register_irda(&collie_ir_data);
 
 	sharpsl_save_param();
 }
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index daa27c474c13..3c43219bc881 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -122,15 +122,8 @@ static struct irda_platform_data h3100_irda_data = {
 	.shutdown	= h3100_irda_shutdown,
 };
 
-static struct gpio_default_state h3100_default_gpio[] = {
-	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
-	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
-	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
-};
-
 static void __init h3100_mach_init(void)
 {
-	h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
 	h3xxx_mach_init();
 
 	sa11x0_register_lcd(&h3100_lcd_info);
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index a663e7230141..5be54c214c7c 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -130,15 +130,8 @@ static struct irda_platform_data h3600_irda_data = {
 	.shutdown	= h3600_irda_shutdown,
 };
 
-static struct gpio_default_state h3600_default_gpio[] = {
-	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
-	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
-	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
-};
-
 static void __init h3600_mach_init(void)
 {
-	h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
 	h3xxx_mach_init();
 
 	sa11x0_register_lcd(&h3600_lcd_info);
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
index f17e7382242a..c79bf467fb7f 100644
--- a/arch/arm/mach-sa1100/h3xxx.c
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -28,37 +28,6 @@
 
 #include "generic.h"
 
-void h3xxx_init_gpio(struct gpio_default_state *s, size_t n)
-{
-	while (n--) {
-		const char *name = s->name;
-		int err;
-
-		if (!name)
-			name = "[init]";
-		err = gpio_request(s->gpio, name);
-		if (err) {
-			printk(KERN_ERR "gpio%u: unable to request: %d\n",
-				s->gpio, err);
-			continue;
-		}
-		if (s->mode >= 0) {
-			err = gpio_direction_output(s->gpio, s->mode);
-		} else {
-			err = gpio_direction_input(s->gpio);
-		}
-		if (err) {
-			printk(KERN_ERR "gpio%u: unable to set direction: %d\n",
-				s->gpio, err);
-			continue;
-		}
-		if (!s->name)
-			gpio_free(s->gpio);
-		s++;
-	}
-}
-
-
 /*
  * H3xxx flash support
  */
@@ -116,9 +85,34 @@ static struct resource h3xxx_flash_resource =
 /*
  * H3xxx uart support
  */
+static struct gpio h3xxx_uart_gpio[] = {
+	{ H3XXX_GPIO_COM_DCD,	GPIOF_IN,		"COM DCD" },
+	{ H3XXX_GPIO_COM_CTS,	GPIOF_IN,		"COM CTS" },
+	{ H3XXX_GPIO_COM_RTS,	GPIOF_OUT_INIT_LOW,	"COM RTS" },
+};
+
+static bool h3xxx_uart_request_gpios(void)
+{
+	static bool h3xxx_uart_gpio_ok;
+	int rc;
+
+	if (h3xxx_uart_gpio_ok)
+		return true;
+
+	rc = gpio_request_array(h3xxx_uart_gpio, ARRAY_SIZE(h3xxx_uart_gpio));
+	if (rc)
+		pr_err("h3xxx_uart_request_gpios: error %d\n", rc);
+	else
+		h3xxx_uart_gpio_ok = true;
+
+	return h3xxx_uart_gpio_ok;
+}
+
 static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl)
 {
 	if (port->mapbase == _Ser3UTCR0) {
+		if (!h3xxx_uart_request_gpios())
+			return;
 		gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS));
 	}
 }
@@ -128,6 +122,8 @@ static u_int h3xxx_uart_get_mctrl(struct uart_port *port)
 	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
 
 	if (port->mapbase == _Ser3UTCR0) {
+		if (!h3xxx_uart_request_gpios())
+			return ret;
 		/*
 		 * DCD and CTS bits are inverted in GPLR by RS232 transceiver
 		 */
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 50e1d850ee2e..b478ca180c19 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -80,7 +80,7 @@ extern void locomolcd_power(int on);
 #define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0
 #define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1
 #define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2
-#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3
+#define COLLIE_GPIO_IR_ON		(COLLIE_TC35143_GPIO_BASE + 3)
 #define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4
 #define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5
 #define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5
diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h
index c810620db53d..603d4343f7f6 100644
--- a/arch/arm/mach-sa1100/include/mach/h3xxx.h
+++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h
@@ -79,17 +79,6 @@
 #define H3600_EGPIO_LCD_5V_ON		(H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */
 #define H3600_EGPIO_LVDD_ON		(H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */
 
-struct gpio_default_state {
-	int gpio;
-	int mode;
-	const char *name;
-};
-
-#define GPIO_MODE_IN	-1
-#define GPIO_MODE_OUT0	0
-#define GPIO_MODE_OUT1	1
-
-void h3xxx_init_gpio(struct gpio_default_state *s, size_t n);
 void __init h3xxx_map_io(void);
 void __init h3xxx_mach_init(void);
 
diff --git a/arch/arm/mach-sa1100/include/mach/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h
deleted file mode 100644
index 7a5d017b58b3..000000000000
--- a/arch/arm/mach-sa1100/include/mach/timex.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/timex.h
- *
- * SA1100 architecture timex specifications
- *
- * Copyright (C) 1998 
- */
-
-/*
- * SA1100 timer
- */
-#define CLOCK_TICK_RATE		3686400
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 6fd4acb8f187..1dea6cfafb31 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -9,6 +9,7 @@
  *
  */
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -20,6 +21,9 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 
+#define SA1100_CLOCK_FREQ 3686400
+#define SA1100_LATCH DIV_ROUND_CLOSEST(SA1100_CLOCK_FREQ, HZ)
+
 static u64 notrace sa1100_read_sched_clock(void)
 {
 	return readl_relaxed(OSCR);
@@ -93,7 +97,7 @@ static void sa1100_timer_resume(struct clock_event_device *cedev)
 	/*
 	 * OSMR0 is the system timer: make sure OSCR is sufficiently behind
 	 */
-	writel_relaxed(OSMR0 - LATCH, OSCR);
+	writel_relaxed(OSMR0 - SA1100_LATCH, OSCR);
 }
 #else
 #define sa1100_timer_suspend NULL
@@ -112,7 +116,7 @@ static struct clock_event_device ckevt_sa1100_osmr0 = {
 
 static struct irqaction sa1100_timer_irq = {
 	.name		= "ost0",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= sa1100_ost0_interrupt,
 	.dev_id		= &ckevt_sa1100_osmr0,
 };
@@ -128,7 +132,7 @@ void __init sa1100_timer_init(void)
 
 	setup_irq(IRQ_OST0, &sa1100_timer_irq);
 
-	clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
+	clocksource_mmio_init(OSCR, "oscr", SA1100_CLOCK_FREQ, 200, 32,
 		clocksource_mmio_readl_up);
 	clockevents_config_and_register(&ckevt_sa1100_osmr0, 3686400,
 					MIN_OSCR_DELTA * 2, 0x7fffffff);
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 05fa505df585..dbd954e61aa7 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -5,18 +5,13 @@ config ARCH_SHMOBILE_MULTI
 	bool "Renesas ARM SoCs" if ARCH_MULTI_V7
 	depends on MMU
 	select ARCH_SHMOBILE
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
 	select ARM_GIC
-	select MIGHT_HAVE_CACHE_L2X0
-	select MIGHT_HAVE_PCI
-	select NO_IOPORT
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
+	select NO_IOPORT_MAP
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
 
 if ARCH_SHMOBILE_MULTI
 
@@ -24,17 +19,21 @@ comment "Renesas ARM SoCs System Type"
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
+	select SYS_SUPPORTS_EM_STI
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
+	select SYS_SUPPORTS_SH_MTU2
 
 config ARCH_R8A7790
 	bool "R-Car H2 (R8A77900)"
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 config ARCH_R8A7791
 	bool "R-Car M2 (R8A77910)"
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 comment "Renesas ARM SoCs Board Type"
 
@@ -45,15 +44,12 @@ config MACH_GENMAI
 config MACH_KOELSCH
 	bool "Koelsch board"
 	depends on ARCH_R8A7791
-
-config MACH_KZM9D
-	bool "KZM9D board"
-	depends on ARCH_EMEV2
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select MICREL_PHY if SH_ETH
 
 config MACH_LAGER
 	bool "Lager board"
 	depends on ARCH_R8A7790
+	select MICREL_PHY if SH_ETH
 
 comment "Renesas ARM SoCs System Configuration"
 endif
@@ -68,6 +64,8 @@ config ARCH_SH7372
 	select ARM_CPU_SUSPEND if PM || CPU_IDLE
 	select CPU_V7
 	select SH_CLK_CPG
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_SH73A0
 	bool "SH-Mobile AG5 (R8A73A00)"
@@ -77,6 +75,8 @@ config ARCH_SH73A0
 	select I2C
 	select SH_CLK_CPG
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A73A4
 	bool "R-Mobile APE6 (R8A73A40)"
@@ -87,6 +87,8 @@ config ARCH_R8A73A4
 	select RENESAS_IRQC
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
@@ -95,6 +97,8 @@ config ARCH_R8A7740
 	select CPU_V7
 	select SH_CLK_CPG
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7778
 	bool "R-Car M1A (R8A77781)"
@@ -102,8 +106,8 @@ config ARCH_R8A7778
 	select CPU_V7
 	select SH_CLK_CPG
 	select ARM_GIC
-	select USB_ARCH_HAS_EHCI
-	select USB_ARCH_HAS_OHCI
+	select SYS_SUPPORTS_SH_TMU
+	select RENESAS_INTC_IRQPIN
 
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
@@ -111,9 +115,8 @@ config ARCH_R8A7779
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
-	select USB_ARCH_HAS_EHCI
-	select USB_ARCH_HAS_OHCI
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7790
 	bool "R-Car H2 (R8A77900)"
@@ -123,6 +126,8 @@ config ARCH_R8A7790
 	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 
 config ARCH_R8A7791
 	bool "R-Car M2 (R8A77910)"
@@ -132,15 +137,8 @@ config ARCH_R8A7791
 	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
-
-config ARCH_EMEV2
-	bool "Emma Mobile EV2"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-	select CPU_V7
-	select MIGHT_HAVE_PCI
-	select USE_OF
-	select AUTO_ZRELADDR
+	select SYS_SUPPORTS_SH_CMT
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
@@ -148,17 +146,20 @@ config ARCH_R7S72100
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
+	select SYS_SUPPORTS_SH_MTU2
 
 comment "Renesas ARM SoCs Board Type"
 
 config MACH_APE6EVM
 	bool "APE6EVM board"
 	depends on ARCH_R8A73A4
+	select SMSC_PHY if SMSC911X
 	select USE_OF
 
 config MACH_APE6EVM_REFERENCE
 	bool "APE6EVM board - Reference Device Tree Implementation"
 	depends on ARCH_R8A73A4
+	select SMSC_PHY if SMSC911X
 	select USE_OF
 	---help---
 	   Use reference implementation of APE6EVM board support
@@ -172,6 +173,7 @@ config MACH_MACKEREL
 	depends on ARCH_SH7372
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SMSC_PHY if SMSC911X
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 	select USE_OF
 
@@ -180,6 +182,7 @@ config MACH_ARMADILLO800EVA
 	depends on ARCH_R8A7740
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SMSC_PHY if SH_ETH
 	select SND_SOC_WM8978 if SND_SIMPLE_CARD
 	select USE_OF
 
@@ -188,11 +191,12 @@ config MACH_ARMADILLO800EVA_REFERENCE
 	depends on ARCH_R8A7740
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SMSC_PHY if SH_ETH
 	select SND_SOC_WM8978 if SND_SIMPLE_CARD
 	select USE_OF
 	---help---
-	   Use reference implementation of Aramdillo800 EVA board support
-	   which makes a greater use of device tree at the expense
+	   Use reference implementation of Armadillo800 EVA board support
+	   which makes greater use of device tree at the expense
 	   of not supporting a number of devices.
 
 	   This is intended to aid developers
@@ -201,17 +205,15 @@ config MACH_BOCKW
 	bool "BOCK-W platform"
 	depends on ARCH_R8A7778
 	select ARCH_REQUIRE_GPIOLIB
-	select RENESAS_INTC_IRQPIN
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select USE_OF
 	select SND_SOC_AK4554 if SND_SIMPLE_CARD
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
+	select USE_OF
 
 config MACH_BOCKW_REFERENCE
 	bool "BOCK-W  - Reference Device Tree Implementation"
 	depends on ARCH_R8A7778
 	select ARCH_REQUIRE_GPIOLIB
-	select RENESAS_INTC_IRQPIN
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select USE_OF
 	---help---
@@ -226,17 +228,6 @@ config MACH_GENMAI
 	depends on ARCH_R7S72100
 	select USE_OF
 
-config MACH_GENMAI_REFERENCE
-	bool "Genmai board - Reference Device Tree Implementation"
-	depends on ARCH_R7S72100
-	select USE_OF
-	---help---
-	   Use reference implementation of Genmai board support
-	   which makes use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
-
 config MACH_MARZEN
 	bool "MARZEN board"
 	depends on ARCH_R8A7779
@@ -261,6 +252,8 @@ config MACH_LAGER
 	bool "Lager board"
 	depends on ARCH_R8A7790
 	select USE_OF
+	select MICREL_PHY if SH_ETH
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 
 config MACH_KOELSCH
 	bool "Koelsch board"
@@ -321,24 +314,6 @@ config SHMOBILE_TIMER_HZ
 	  want to select a HZ value such as 128 that can evenly divide RCLK.
 	  A HZ value that does not divide evenly may cause timer drift.
 
-config SH_TIMER_CMT
-	bool "CMT timer driver"
-	default y
-	help
-	  This enables build of the CMT timer driver.
-
-config SH_TIMER_TMU
-	bool "TMU timer driver"
-	default y
-	help
-	  This enables build of the TMU timer driver.
-
-config EM_TIMER_STI
-	bool "STI timer driver"
-	default y
-	help
-	  This enables build of the STI timer driver.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index fe7d4ff706e4..38d5fe825e93 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -21,8 +21,8 @@ obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
 obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 
 # Clock objects
-ifndef CONFIG_COMMON_CLK
 obj-y				+= clock.o
+ifndef CONFIG_COMMON_CLK
 obj-$(CONFIG_ARCH_SH7372)	+= clock-sh7372.o
 obj-$(CONFIG_ARCH_SH73A0)	+= clock-sh73a0.o
 obj-$(CONFIG_ARCH_R8A73A4)	+= clock-r8a73a4.o
@@ -31,7 +31,6 @@ obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= clock-r8a7790.o
 obj-$(CONFIG_ARCH_R8A7791)	+= clock-r8a7791.o
-obj-$(CONFIG_ARCH_EMEV2)	+= clock-emev2.o
 obj-$(CONFIG_ARCH_R7S72100)	+= clock-r7s72100.o
 endif
 
@@ -52,13 +51,13 @@ obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 obj-$(CONFIG_ARCH_SH7372)	+= pm-sh7372.o sleep-sh7372.o pm-rmobile.o
 obj-$(CONFIG_ARCH_SH73A0)	+= pm-sh73a0.o
 obj-$(CONFIG_ARCH_R8A7740)	+= pm-r8a7740.o pm-rmobile.o
-obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o pm-rcar.o
+obj-$(CONFIG_ARCH_R8A7790)	+= pm-r8a7790.o pm-rcar.o
 
 # Board objects
 ifdef CONFIG_ARCH_SHMOBILE_MULTI
 obj-$(CONFIG_MACH_GENMAI)	+= board-genmai-reference.o
 obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch-reference.o
-obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d-reference.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager-reference.o
 else
 obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o
@@ -67,7 +66,6 @@ obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 obj-$(CONFIG_MACH_GENMAI)	+= board-genmai.o
-obj-$(CONFIG_MACH_GENMAI_REFERENCE)	+= board-genmai-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_MARZEN_REFERENCE)	+= board-marzen-reference.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 99455ecafa05..918fccffa1b6 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -7,7 +7,6 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 loadaddr-$(CONFIG_MACH_GENMAI) += 0x08008000
-loadaddr-$(CONFIG_MACH_GENMAI_REFERENCE) += 0x08008000
 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index 57d1a78367b6..f660fbb96e0b 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -164,8 +164,8 @@ static void __init eva_init(void)
 	r8a7740_meram_workaround();
 
 #ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
+	/* Shared attribute override enable, 32K*8way */
+	l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
 #endif
 
 	r8a7740_add_standard_devices_dt();
@@ -187,7 +187,7 @@ static const char *eva_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
 	.map_io		= r8a7740_map_io,
-	.init_early	= r8a7740_init_delay,
+	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= eva_init,
 	.init_late	= shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 93533e2710a8..01f81100c330 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -383,6 +383,8 @@ static struct platform_device sh_eth_device = {
 	.id = -1,
 	.dev = {
 		.platform_data = &sh_eth_platdata,
+		.dma_mask = &sh_eth_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 	.resource = sh_eth_resources,
 	.num_resources = ARRAY_SIZE(sh_eth_resources),
@@ -988,14 +990,13 @@ static struct asoc_simple_card_info fsi_wm8978_info = {
 	.card		= "FSI2A-WM8978",
 	.codec		= "wm8978.0-001a",
 	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_I2S,
+	.daifmt		= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
 	.cpu_dai = {
+		.fmt	= SND_SOC_DAIFMT_IB_NF,
 		.name	= "fsia-dai",
-		.fmt	= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_IB_NF,
 	},
 	.codec_dai = {
 		.name	= "wm8978-hifi",
-		.fmt	= SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_NB_NF,
 		.sysclk	= 12288000,
 	},
 };
@@ -1016,7 +1017,7 @@ static struct asoc_simple_card_info fsi2_hdmi_info = {
 	.platform	= "sh_fsi2",
 	.cpu_dai = {
 		.name	= "fsib-dai",
-		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
+		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
 	},
 	.codec_dai = {
 		.name = "sh_mobile_hdmi-hifi",
@@ -1270,8 +1271,8 @@ static void __init eva_init(void)
 
 
 #ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
+	/* Shared attribute override enable, 32K*8way */
+	l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
 #endif
 
 	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
@@ -1299,11 +1300,6 @@ static void __init eva_earlytimer_init(void)
 	eva_clock_init();
 }
 
-static void __init eva_add_early_devices(void)
-{
-	r8a7740_add_early_devices();
-}
-
 #define RESCNT2 IOMEM(0xe6188020)
 static void eva_restart(enum reboot_mode mode, const char *cmd)
 {
@@ -1318,7 +1314,7 @@ static const char *eva_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
 	.map_io		= r8a7740_map_io,
-	.init_early	= eva_add_early_devices,
+	.init_early	= r8a7740_add_early_devices,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= eva_init,
 	.init_late	= shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index c475220545f2..f444be2f241e 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -1,9 +1,9 @@
 /*
  * Bock-W board support
  *
- * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013-2014  Renesas Solutions Corp.
  * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013  Cogent Embedded, Inc.
+ * Copyright (C) 2013-2014  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -168,6 +168,8 @@ static struct renesas_usbhs_platform_info usbhs_info __initdata = {
 	},
 	.driver_param = {
 		.buswait_bwait	= 4,
+		.d0_tx_id	= HPBDMA_SLAVE_USBFUNC_TX,
+		.d1_rx_id	= HPBDMA_SLAVE_USBFUNC_RX,
 	},
 };
 
@@ -233,6 +235,17 @@ static struct sh_eth_plat_data ether_platform_data __initdata = {
 	.no_ether_link	= 1,
 };
 
+static struct platform_device_info ether_info __initdata = {
+	.parent		= &platform_bus,
+	.name		= "r8a777x-ether",
+	.id		= -1,
+	.res		= ether_resources,
+	.num_res	= ARRAY_SIZE(ether_resources),
+	.data		= &ether_platform_data,
+	.size_data	= sizeof(ether_platform_data),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
 /* I2C */
 static struct i2c_board_info i2c0_devices[] = {
 	{
@@ -332,16 +345,39 @@ static struct rsnd_ssi_platform_info rsnd_ssi[] = {
 	RSND_SSI_UNUSED, /* SSI 0 */
 	RSND_SSI_UNUSED, /* SSI 1 */
 	RSND_SSI_UNUSED, /* SSI 2 */
-	RSND_SSI_SET(1, 0, gic_iid(0x85), RSND_SSI_PLAY),
-	RSND_SSI_SET(2, 0, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
-	RSND_SSI_SET(0, 0, gic_iid(0x86), RSND_SSI_PLAY),
-	RSND_SSI_SET(0, 0, gic_iid(0x86), 0),
-	RSND_SSI_SET(3, 0, gic_iid(0x86), RSND_SSI_PLAY),
-	RSND_SSI_SET(4, 0, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
+	RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0),
+	RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
+	RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0),
+	RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0),
+	RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0),
+	RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
+};
+
+static struct rsnd_src_platform_info rsnd_src[9] = {
+	RSND_SRC_UNUSED, /* SRU 0 */
+	RSND_SRC_UNUSED, /* SRU 1 */
+	RSND_SRC_UNUSED, /* SRU 2 */
+	RSND_SRC(0, 0),
+	RSND_SRC(0, 0),
+	RSND_SRC(0, 0),
+	RSND_SRC(0, 0),
+	RSND_SRC(0, 0),
+	RSND_SRC(0, 0),
 };
 
-static struct rsnd_scu_platform_info rsnd_scu[9] = {
-	/* no member at this point */
+static struct rsnd_dai_platform_info rsnd_dai[] = {
+	{
+		.playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] },
+		.capture  = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] },
+	}, {
+		.playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] },
+	}, {
+		.capture  = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] },
+	}, {
+		.playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] },
+	}, {
+		.capture  = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] },
+	},
 };
 
 enum {
@@ -416,8 +452,10 @@ static struct rcar_snd_info rsnd_info = {
 	.flags		= RSND_GEN1,
 	.ssi_info	= rsnd_ssi,
 	.ssi_info_nr	= ARRAY_SIZE(rsnd_ssi),
-	.scu_info	= rsnd_scu,
-	.scu_info_nr	= ARRAY_SIZE(rsnd_scu),
+	.src_info	= rsnd_src,
+	.src_info_nr	= ARRAY_SIZE(rsnd_src),
+	.dai_info	= rsnd_dai,
+	.dai_info_nr	= ARRAY_SIZE(rsnd_dai),
 	.start		= rsnd_start,
 	.stop		= rsnd_stop,
 };
@@ -429,14 +467,12 @@ static struct asoc_simple_card_info rsnd_card_info[] = {
 		.card		= "SSI56-AK4643",
 		.codec		= "ak4642-codec.0-0012",
 		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_LEFT_J,
+		.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
 		.cpu_dai = {
 			.name	= "rsnd-dai.0",
-			.fmt	= SND_SOC_DAIFMT_CBS_CFS,
 		},
 		.codec_dai = {
 			.name	= "ak4642-hifi",
-			.fmt	= SND_SOC_DAIFMT_CBM_CFM,
 			.sysclk	= 11289600,
 		},
 	},
@@ -446,10 +482,9 @@ static struct asoc_simple_card_info rsnd_card_info[] = {
 		.card		= "SSI3-AK4554(playback)",
 		.codec		= "ak4554-adc-dac.0",
 		.platform	= "rcar_sound",
+		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
 		.cpu_dai = {
 			.name	= "rsnd-dai.1",
-			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
-				  SND_SOC_DAIFMT_RIGHT_J,
 		},
 		.codec_dai = {
 			.name	= "ak4554-hifi",
@@ -461,10 +496,9 @@ static struct asoc_simple_card_info rsnd_card_info[] = {
 		.card		= "SSI4-AK4554(capture)",
 		.codec		= "ak4554-adc-dac.0",
 		.platform	= "rcar_sound",
+		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
 		.cpu_dai = {
 			.name	= "rsnd-dai.2",
-			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
-				  SND_SOC_DAIFMT_LEFT_J,
 		},
 		.codec_dai = {
 			.name	= "ak4554-hifi",
@@ -476,10 +510,9 @@ static struct asoc_simple_card_info rsnd_card_info[] = {
 		.card		= "SSI7-AK4554(playback)",
 		.codec		= "ak4554-adc-dac.1",
 		.platform	= "rcar_sound",
+		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
 		.cpu_dai = {
 			.name	= "rsnd-dai.3",
-			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
-				  SND_SOC_DAIFMT_RIGHT_J,
 		},
 		.codec_dai = {
 			.name	= "ak4554-hifi",
@@ -491,10 +524,9 @@ static struct asoc_simple_card_info rsnd_card_info[] = {
 		.card		= "SSI8-AK4554(capture)",
 		.codec		= "ak4554-adc-dac.1",
 		.platform	= "rcar_sound",
+		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
 		.cpu_dai = {
 			.name	= "rsnd-dai.4",
-			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
-				  SND_SOC_DAIFMT_LEFT_J,
 		},
 		.codec_dai = {
 			.name	= "ak4554-hifi",
@@ -576,17 +608,14 @@ static void __init bockw_init(void)
 {
 	void __iomem *base;
 	struct clk *clk;
+	struct platform_device *pdev;
 	int i;
 
 	r8a7778_clock_init();
 	r8a7778_init_irq_extpin(1);
 	r8a7778_add_standard_devices();
 
-	platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  &ether_platform_data,
-					  sizeof(ether_platform_data));
+	platform_device_register_full(&ether_info);
 
 	platform_device_register_full(&vin0_info);
 	/* VIN1 has a pin conflict with Ether */
@@ -662,9 +691,6 @@ static void __init bockw_init(void)
 	}
 
 	/* for Audio */
-	clk = clk_get(NULL, "audio_clk_b");
-	clk_set_rate(clk, 24576000);
-	clk_put(clk);
 	rsnd_codec_power(5, 1); /* enable ak4642 */
 
 	platform_device_register_simple(
@@ -673,11 +699,15 @@ static void __init bockw_init(void)
 	platform_device_register_simple(
 		"ak4554-adc-dac", 1, NULL, 0);
 
-	platform_device_register_resndata(
+	pdev = platform_device_register_resndata(
 		&platform_bus, "rcar_sound", -1,
 		rsnd_resources, ARRAY_SIZE(rsnd_resources),
 		&rsnd_info, sizeof(rsnd_info));
 
+	clk = clk_get(&pdev->dev, "clk_b");
+	clk_set_rate(clk, 24576000);
+	clk_put(clk);
+
 	for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) {
 		struct platform_device_info cardinfo = {
 			.parent         = &platform_bus,
diff --git a/arch/arm/mach-shmobile/board-genmai-reference.c b/arch/arm/mach-shmobile/board-genmai-reference.c
index 7630c1053e32..2ff6ad6e608e 100644
--- a/arch/arm/mach-shmobile/board-genmai-reference.c
+++ b/arch/arm/mach-shmobile/board-genmai-reference.c
@@ -18,27 +18,31 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/clk-provider.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <mach/clock.h>
 #include <mach/common.h>
 #include <mach/r7s72100.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/*
+ * This is a really crude hack to provide clkdev support to platform
+ * devices until they get moved to DT.
+ */
+static const struct clk_name clk_names[] = {
+	{ "mtu2", "fck", "sh-mtu2" },
+};
+
 static void __init genmai_add_standard_devices(void)
 {
-#ifdef CONFIG_COMMON_CLK
-	of_clk_init(NULL);
-#else
-	r7s72100_clock_init();
-#endif
+	shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), true);
 	r7s72100_add_dt_devices();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const genmai_boards_compat_dt[] __initconst = {
-	"renesas,genmai-reference",
+	"renesas,genmai",
 	NULL,
 };
 
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
index 3e92e3c62d4c..c94201ee8596 100644
--- a/arch/arm/mach-shmobile/board-genmai.c
+++ b/arch/arm/mach-shmobile/board-genmai.c
@@ -1,8 +1,9 @@
 /*
  * Genmai board support
  *
- * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013-2014  Renesas Solutions Corp.
  * Copyright (C) 2013  Magnus Damm
+ * Copyright (C) 2014  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,15 +21,131 @@
 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_eth.h>
+#include <linux/spi/rspi.h>
+#include <linux/spi/spi.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/r7s72100.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* Ether */
+static const struct sh_eth_plat_data ether_pdata __initconst = {
+	.phy			= 0x00, /* PD60610 */
+	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
+	.no_ether_link		= 1
+};
+
+static const struct resource ether_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe8203000, 0x800),
+	DEFINE_RES_MEM(0xe8204800, 0x200),
+	DEFINE_RES_IRQ(gic_iid(359)),
+};
+
+static const struct platform_device_info ether_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "r7s72100-ether",
+	.id		= -1,
+	.res		= ether_resources,
+	.num_res	= ARRAY_SIZE(ether_resources),
+	.data		= &ether_pdata,
+	.size_data	= sizeof(ether_pdata),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+/* RSPI */
+#define RSPI_RESOURCE(idx, baseaddr, irq)				\
+static const struct resource rspi##idx##_resources[] __initconst = {	\
+	DEFINE_RES_MEM(baseaddr, 0x24),					\
+	DEFINE_RES_IRQ_NAMED(irq, "error"),				\
+	DEFINE_RES_IRQ_NAMED(irq + 1, "rx"),				\
+	DEFINE_RES_IRQ_NAMED(irq + 2, "tx"),				\
+}
+
+RSPI_RESOURCE(0, 0xe800c800, gic_iid(270));
+RSPI_RESOURCE(1, 0xe800d000, gic_iid(273));
+RSPI_RESOURCE(2, 0xe800d800, gic_iid(276));
+RSPI_RESOURCE(3, 0xe800e000, gic_iid(279));
+RSPI_RESOURCE(4, 0xe800e800, gic_iid(282));
+
+static const struct rspi_plat_data rspi_pdata __initconst = {
+	.num_chipselect	= 1,
+};
+
+#define r7s72100_register_rspi(idx)					   \
+	platform_device_register_resndata(&platform_bus, "rspi-rz", idx,   \
+					rspi##idx##_resources,		   \
+					ARRAY_SIZE(rspi##idx##_resources), \
+					&rspi_pdata, sizeof(rspi_pdata))
+
+static const struct spi_board_info spi_info[] __initconst = {
+	{
+		.modalias               = "wm8978",
+		.max_speed_hz           = 5000000,
+		.bus_num                = 4,
+		.chip_select            = 0,
+	},
+};
+
+/* SCIF */
+#define R7S72100_SCIF(index, baseaddr, irq)				\
+static const struct plat_sci_port scif##index##_platform_data = {	\
+	.type		= PORT_SCIF,					\
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,		\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,		\
+	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |	\
+			  SCSCR_REIE,					\
+};									\
+									\
+static struct resource scif##index##_resources[] = {			\
+	DEFINE_RES_MEM(baseaddr, 0x100),				\
+	DEFINE_RES_IRQ(irq + 1),					\
+	DEFINE_RES_IRQ(irq + 2),					\
+	DEFINE_RES_IRQ(irq + 3),					\
+	DEFINE_RES_IRQ(irq),						\
+}									\
+
+R7S72100_SCIF(0, 0xe8007000, gic_iid(221));
+R7S72100_SCIF(1, 0xe8007800, gic_iid(225));
+R7S72100_SCIF(2, 0xe8008000, gic_iid(229));
+R7S72100_SCIF(3, 0xe8008800, gic_iid(233));
+R7S72100_SCIF(4, 0xe8009000, gic_iid(237));
+R7S72100_SCIF(5, 0xe8009800, gic_iid(241));
+R7S72100_SCIF(6, 0xe800a000, gic_iid(245));
+R7S72100_SCIF(7, 0xe800a800, gic_iid(249));
+
+#define r7s72100_register_scif(index)					       \
+	platform_device_register_resndata(&platform_bus, "sh-sci", index,      \
+					  scif##index##_resources,	       \
+					  ARRAY_SIZE(scif##index##_resources), \
+					  &scif##index##_platform_data,	       \
+					  sizeof(scif##index##_platform_data))
+
 static void __init genmai_add_standard_devices(void)
 {
 	r7s72100_clock_init();
 	r7s72100_add_dt_devices();
+
+	platform_device_register_full(&ether_info);
+
+	r7s72100_register_rspi(0);
+	r7s72100_register_rspi(1);
+	r7s72100_register_rspi(2);
+	r7s72100_register_rspi(3);
+	r7s72100_register_rspi(4);
+	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
+
+	r7s72100_register_scif(0);
+	r7s72100_register_scif(1);
+	r7s72100_register_scif(2);
+	r7s72100_register_scif(3);
+	r7s72100_register_scif(4);
+	r7s72100_register_scif(5);
+	r7s72100_register_scif(6);
+	r7s72100_register_scif(7);
 }
 
 static const char * const genmai_boards_compat_dt[] __initconst = {
diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index 652b59268416..d322a162b4b0 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -19,48 +19,101 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/clk.h>
-#include <linux/clkdev.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/rcar-du.h>
+#include <mach/clock.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/rcar-gen2.h>
 #include <mach/r8a7791.h>
 #include <asm/mach/arch.h>
 
-static void __init koelsch_add_standard_devices(void)
+/* DU */
+static struct rcar_du_encoder_data koelsch_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS0,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static struct rcar_du_platform_data koelsch_du_pdata = {
+	.encoders = koelsch_du_encoders,
+	.num_encoders = ARRAY_SIZE(koelsch_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfeb00000, 0x40000),
+	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+	DEFINE_RES_IRQ(gic_spi(256)),
+	DEFINE_RES_IRQ(gic_spi(268)),
+};
+
+static void __init koelsch_add_du_device(void)
 {
-#ifdef CONFIG_COMMON_CLK
-	/*
-	 * This is a really crude hack to provide clkdev support to the SCIF
-	 * and CMT devices until they get moved to DT.
-	 */
-	static const char * const scif_names[] = {
-		"scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifa2",
-		"scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scifa3",
-		"scifa4", "scifa5",
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7791",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &koelsch_du_pdata,
+		.size_data = sizeof(koelsch_du_pdata),
+		.dma_mask = DMA_BIT_MASK(32),
 	};
-	struct clk *clk;
-	unsigned int i;
 
-	for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
-		clk = clk_get(NULL, scif_names[i]);
-		if (clk) {
-			clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
-			clk_put(clk);
-		}
-	}
+	platform_device_register_full(&info);
+}
 
-	clk = clk_get(NULL, "cmt0");
-	if (clk) {
-		clk_register_clkdev(clk, NULL, "sh_cmt.0");
-		clk_put(clk);
-	}
-#else
-	r8a7791_clock_init();
-#endif
+/*
+ * This is a really crude hack to provide clkdev support to platform
+ * devices until they get moved to DT.
+ */
+static const struct clk_name clk_names[] __initconst = {
+	{ "cmt0", "fck", "sh-cmt-48-gen2.0" },
+	{ "du0", "du.0", "rcar-du-r8a7791" },
+	{ "du1", "du.1", "rcar-du-r8a7791" },
+	{ "lvds0", "lvds.0", "rcar-du-r8a7791" },
+};
+
+/*
+ * This is a really crude hack to work around core platform clock issues
+ */
+static const struct clk_name clk_enables[] __initconst = {
+	{ "ether", NULL, "ee700000.ethernet" },
+	{ "i2c2", NULL, "e6530000.i2c" },
+	{ "msiof0", NULL, "e6e20000.spi" },
+	{ "qspi_mod", NULL, "e6b10000.spi" },
+	{ "sdhi0", NULL, "ee100000.sd" },
+	{ "sdhi1", NULL, "ee140000.sd" },
+	{ "sdhi2", NULL, "ee160000.sd" },
+	{ "thermal", NULL, "e61f0000.thermal" },
+};
+
+static void __init koelsch_add_standard_devices(void)
+{
+	shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
+	shmobile_clk_workaround(clk_enables, ARRAY_SIZE(clk_enables), true);
 	r8a7791_add_dt_devices();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	koelsch_add_du_device();
 }
 
 static const char * const koelsch_boards_compat_dt[] __initconst = {
@@ -71,7 +124,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = {
 
 DT_MACHINE_START(KOELSCH_DT, "koelsch")
 	.smp		= smp_ops(r8a7791_smp_ops),
-	.init_early	= r8a7791_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.init_machine	= koelsch_add_standard_devices,
 	.init_late	= shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index de7cc64b1f37..c6c68892caa3 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -2,8 +2,9 @@
  * Koelsch board support
  *
  * Copyright (C) 2013  Renesas Electronics Corporation
- * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013-2014  Renesas Solutions Corp.
  * Copyright (C) 2013  Magnus Damm
+ * Copyright (C) 2014  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -23,14 +24,27 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 #include <linux/phy.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/rcar-du.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/gpio-regulator.h>
+#include <linux/regulator/machine.h>
 #include <linux/sh_eth.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/rspi.h>
+#include <linux/spi/spi.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7791.h>
@@ -92,6 +106,7 @@ static void __init koelsch_add_du_device(void)
 /* Ether */
 static const struct sh_eth_plat_data ether_pdata __initconst = {
 	.phy			= 0x1,
+	.phy_irq		= irq_pin(0),
 	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
 	.phy_interface		= PHY_INTERFACE_MODE_RMII,
 	.ether_link_active_low	= 1,
@@ -102,6 +117,17 @@ static const struct resource ether_resources[] __initconst = {
 	DEFINE_RES_IRQ(gic_spi(162)),
 };
 
+static const struct platform_device_info ether_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "r8a7791-ether",
+	.id		= -1,
+	.res		= ether_resources,
+	.num_res	= ARRAY_SIZE(ether_resources),
+	.data		= &ether_pdata,
+	.size_data	= sizeof(ether_pdata),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
 /* LEDS */
 static struct gpio_led koelsch_leds[] = {
 	{
@@ -148,6 +174,199 @@ static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = {
 	.nbuttons	= ARRAY_SIZE(gpio_buttons),
 };
 
+/* QSPI */
+static const struct resource qspi_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe6b10000, 0x1000),
+	DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
+};
+
+static const struct rspi_plat_data qspi_pdata __initconst = {
+	.num_chipselect = 1,
+};
+
+/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64 MiB) */
+static struct mtd_partition spi_flash_part[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static const struct flash_platform_data spi_flash_data = {
+	.name		= "m25p80",
+	.parts		= spi_flash_part,
+	.nr_parts	= ARRAY_SIZE(spi_flash_part),
+	.type		= "s25fl512s",
+};
+
+static const struct spi_board_info spi_info[] __initconst = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &spi_flash_data,
+		.mode		= SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD,
+		.max_speed_hz	= 30000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+/* SATA0 */
+static const struct resource sata0_resources[] __initconst = {
+	DEFINE_RES_MEM(0xee300000, 0x2000),
+	DEFINE_RES_IRQ(gic_spi(105)),
+};
+
+static const struct platform_device_info sata0_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "sata-r8a7791",
+	.id		= 0,
+	.res		= sata0_resources,
+	.num_res	= ARRAY_SIZE(sata0_resources),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+/* I2C */
+static const struct resource i2c_resources[] __initconst = {
+	/* I2C0 */
+	DEFINE_RES_MEM(0xE6508000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(287)),
+	/* I2C1 */
+	DEFINE_RES_MEM(0xE6518000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(288)),
+	/* I2C2 */
+	DEFINE_RES_MEM(0xE6530000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(286)),
+	/* I2C3 */
+	DEFINE_RES_MEM(0xE6540000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(290)),
+	/* I2C4 */
+	DEFINE_RES_MEM(0xE6520000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(19)),
+	/* I2C5 */
+	DEFINE_RES_MEM(0xE6528000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(20)),
+};
+
+static void __init koelsch_add_i2c(unsigned idx)
+{
+	unsigned res_idx = idx * 2;
+
+	BUG_ON(res_idx >= ARRAY_SIZE(i2c_resources));
+
+	platform_device_register_simple("i2c-rcar_gen2", idx,
+					i2c_resources + res_idx, 2);
+}
+
+#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin)				\
+static struct regulator_consumer_supply vcc_sdhi##idx##_consumer =	\
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx);		\
+									\
+static struct regulator_init_data vcc_sdhi##idx##_init_data = {		\
+	.constraints = {						\
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,		\
+	},								\
+	.consumer_supplies	= &vcc_sdhi##idx##_consumer,		\
+	.num_consumer_supplies	= 1,					\
+};									\
+									\
+static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
+	.supply_name	= "SDHI" #idx "Vcc",				\
+	.microvolts	= 3300000,					\
+	.gpio		= vdd_pin,					\
+	.enable_high	= 1,						\
+	.init_data	= &vcc_sdhi##idx##_init_data,			\
+};									\
+									\
+static struct regulator_consumer_supply vccq_sdhi##idx##_consumer =	\
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx);		\
+									\
+static struct regulator_init_data vccq_sdhi##idx##_init_data = {	\
+	.constraints = {						\
+		.input_uV	= 3300000,				\
+		.min_uV		= 1800000,				\
+		.max_uV		= 3300000,				\
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |		\
+				  REGULATOR_CHANGE_STATUS,		\
+	},								\
+	.consumer_supplies	= &vccq_sdhi##idx##_consumer,		\
+	.num_consumer_supplies	= 1,					\
+};									\
+									\
+static struct gpio vccq_sdhi##idx##_gpio =				\
+	{ vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx };		\
+									\
+static struct gpio_regulator_state vccq_sdhi##idx##_states[] = {	\
+	{ .value = 1800000, .gpios = 0 },				\
+	{ .value = 3300000, .gpios = 1 },				\
+};									\
+									\
+static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
+	.supply_name	= "vqmmc",					\
+	.gpios		= &vccq_sdhi##idx##_gpio,			\
+	.nr_gpios	= 1,						\
+	.states		= vccq_sdhi##idx##_states,			\
+	.nr_states	= ARRAY_SIZE(vccq_sdhi##idx##_states),		\
+	.type		= REGULATOR_VOLTAGE,				\
+	.init_data	= &vccq_sdhi##idx##_init_data,			\
+};
+
+SDHI_REGULATOR(0, RCAR_GP_PIN(7, 17), RCAR_GP_PIN(2, 12));
+SDHI_REGULATOR(1, RCAR_GP_PIN(7, 18), RCAR_GP_PIN(2, 13));
+SDHI_REGULATOR(2, RCAR_GP_PIN(7, 19), RCAR_GP_PIN(2, 26));
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi0_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee100000, 0x200),
+	DEFINE_RES_IRQ(gic_spi(165)),
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi1_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee140000, 0x100),
+	DEFINE_RES_IRQ(gic_spi(167)),
+};
+
+/* SDHI2 */
+static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
+			  TMIO_MMC_WRPROTECT_DISABLE,
+};
+
+static struct resource sdhi2_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee160000, 0x100),
+	DEFINE_RES_IRQ(gic_spi(168)),
+};
+
 static const struct pinctrl_map koelsch_pinctrl_map[] = {
 	/* DU */
 	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
@@ -165,12 +384,51 @@ static const struct pinctrl_map koelsch_pinctrl_map[] = {
 				  "eth_rmii", "eth"),
 	PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
 				  "intc_irq0", "intc"),
+	/* QSPI */
+	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
+				  "qspi_ctrl", "qspi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
+				  "qspi_data4", "qspi"),
 	/* SCIF0 (CN19: DEBUG SERIAL0) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",
 				  "scif0_data_d", "scif0"),
 	/* SCIF1 (CN20: DEBUG SERIAL1) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7791",
 				  "scif1_data_d", "scif1"),
+	/* I2C1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.1", "pfc-r8a7791",
+				  "i2c1_e", "i2c1"),
+	/* I2C2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.2", "pfc-r8a7791",
+				  "i2c2", "i2c2"),
+	/* I2C4 */
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.4", "pfc-r8a7791",
+				  "i2c4_c", "i2c4"),
+	/* SDHI0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
+				  "sdhi0_data4", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
+				  "sdhi0_ctrl", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
+				  "sdhi0_cd", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
+				  "sdhi0_wp", "sdhi0"),
+	/* SDHI2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
+				  "sdhi1_data4", "sdhi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
+				  "sdhi1_ctrl", "sdhi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
+				  "sdhi1_cd", "sdhi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
+				  "sdhi1_wp", "sdhi1"),
+	/* SDHI2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
+				  "sdhi2_data4", "sdhi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
+				  "sdhi2_ctrl", "sdhi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
+				  "sdhi2_cd", "sdhi2"),
 };
 
 static void __init koelsch_add_standard_devices(void)
@@ -180,18 +438,53 @@ static void __init koelsch_add_standard_devices(void)
 				  ARRAY_SIZE(koelsch_pinctrl_map));
 	r8a7791_pinmux_init();
 	r8a7791_add_standard_devices();
-	platform_device_register_resndata(&platform_bus, "r8a7791-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  &ether_pdata, sizeof(ether_pdata));
+	platform_device_register_full(&ether_info);
 	platform_device_register_data(&platform_bus, "leds-gpio", -1,
 				      &koelsch_leds_pdata,
 				      sizeof(koelsch_leds_pdata));
 	platform_device_register_data(&platform_bus, "gpio-keys", -1,
 				      &koelsch_keys_pdata,
 				      sizeof(koelsch_keys_pdata));
+	platform_device_register_resndata(&platform_bus, "qspi", 0,
+					  qspi_resources,
+					  ARRAY_SIZE(qspi_resources),
+					  &qspi_pdata, sizeof(qspi_pdata));
+	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
 
 	koelsch_add_du_device();
+
+	platform_device_register_full(&sata0_info);
+
+	koelsch_add_i2c(1);
+	koelsch_add_i2c(2);
+	koelsch_add_i2c(4);
+	koelsch_add_i2c(5);
+
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage", 0,
+				      &vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage", 1,
+				      &vcc_sdhi1_info, sizeof(struct fixed_voltage_config));
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage", 2,
+				      &vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
+	platform_device_register_data(&platform_bus, "gpio-regulator", 0,
+				      &vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
+	platform_device_register_data(&platform_bus, "gpio-regulator", 1,
+				      &vccq_sdhi1_info, sizeof(struct gpio_regulator_config));
+	platform_device_register_data(&platform_bus, "gpio-regulator", 2,
+				      &vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
+
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
+					  sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
+					  &sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
+
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1,
+					  sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
+					  &sdhi1_info, sizeof(struct sh_mobile_sdhi_info));
+
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 2,
+					  sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
+					  &sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
+
 }
 
 /*
@@ -215,6 +508,8 @@ static void __init koelsch_init(void)
 {
 	koelsch_add_standard_devices();
 
+	irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
+
 	if (IS_ENABLED(CONFIG_PHYLIB))
 		phy_register_fixup_for_id("r8a7791-ether-ff:01",
 					  koelsch_ksz8041_fixup);
@@ -227,7 +522,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = {
 
 DT_MACHINE_START(KOELSCH_DT, "koelsch")
 	.smp		= smp_ops(r8a7791_smp_ops),
-	.init_early	= r8a7791_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.init_machine	= koelsch_init,
 	.init_late	= shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-kzm9d-reference.c b/arch/arm/mach-shmobile/board-kzm9d-reference.c
deleted file mode 100644
index 054d8d5c8fc1..000000000000
--- a/arch/arm/mach-shmobile/board-kzm9d-reference.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * kzm9d board support - Reference DT implementation
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <mach/emev2.h>
-#include <mach/common.h>
-#include <asm/mach/arch.h>
-
-static void __init kzm9d_add_standard_devices(void)
-{
-	if (!IS_ENABLED(CONFIG_COMMON_CLK))
-		emev2_clock_init();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *kzm9d_boards_compat_dt[] __initdata = {
-	"renesas,kzm9d",
-	"renesas,kzm9d-reference",
-	NULL,
-};
-
-DT_MACHINE_START(KZM9D_DT, "kzm9d")
-	.smp		= smp_ops(emev2_smp_ops),
-	.map_io		= emev2_map_io,
-	.init_early	= emev2_init_delay,
-	.init_machine	= kzm9d_add_standard_devices,
-	.init_late	= shmobile_init_late,
-	.dt_compat	= kzm9d_boards_compat_dt,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 598e32488410..a735a1d80c28 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -36,8 +36,8 @@ static void __init kzm_init(void)
 	sh73a0_add_standard_devices_dt();
 
 #ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
+	/* Shared attribute override enable, 64K*8way */
+	l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
 #endif
 }
 
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index bc40b853ffd3..f94ec8ca42c1 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -589,14 +589,12 @@ static struct asoc_simple_card_info fsi2_ak4648_info = {
 	.card		= "FSI2A-AK4648",
 	.codec		= "ak4642-codec.0-0012",
 	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_LEFT_J,
+	.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
 	.cpu_dai = {
 		.name	= "fsia-dai",
-		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
 	},
 	.codec_dai = {
 		.name	= "ak4642-hifi",
-		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
 		.sysclk	= 11289600,
 	},
 };
@@ -878,8 +876,8 @@ static void __init kzm_init(void)
 	gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */
 
 #ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
+	/* Shared attribute override enable, 64K*8way */
+	l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
 #endif
 
 	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index a6e271d92af0..749832e3f33c 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -18,49 +18,107 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/clk.h>
-#include <linux/clkdev.h>
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/rcar-du.h>
+#include <mach/clock.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/rcar-gen2.h>
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
-static void __init lager_add_standard_devices(void)
+/* DU */
+static struct rcar_du_encoder_data lager_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_VGA,
+		.output = RCAR_DU_OUTPUT_DPAD0,
+	}, {
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS1,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static struct rcar_du_platform_data lager_du_pdata = {
+	.encoders = lager_du_encoders,
+	.num_encoders = ARRAY_SIZE(lager_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfeb00000, 0x70000),
+	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+	DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
+	DEFINE_RES_IRQ(gic_spi(256)),
+	DEFINE_RES_IRQ(gic_spi(268)),
+	DEFINE_RES_IRQ(gic_spi(269)),
+};
+
+static void __init lager_add_du_device(void)
 {
-#ifdef CONFIG_COMMON_CLK
-	/*
-	 * This is a really crude hack to provide clkdev support to the SCIF
-	 * and CMT devices until they get moved to DT.
-	 */
-	static const char * const scif_names[] = {
-		"scifa0", "scifa1", "scifb0", "scifb1",
-		"scifb2", "scifa2", "scif0", "scif1",
-		"hscif0", "hscif1",
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7790",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &lager_du_pdata,
+		.size_data = sizeof(lager_du_pdata),
+		.dma_mask = DMA_BIT_MASK(32),
 	};
-	struct clk *clk;
-	unsigned int i;
 
-	for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
-		clk = clk_get(NULL, scif_names[i]);
-		if (clk) {
-			clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
-			clk_put(clk);
-		}
-	}
+	platform_device_register_full(&info);
+}
+
+/*
+ * This is a really crude hack to provide clkdev support to platform
+ * devices until they get moved to DT.
+ */
+static const struct clk_name clk_names[] __initconst = {
+	{ "cmt0", "fck", "sh-cmt-48-gen2.0" },
+	{ "du0", "du.0", "rcar-du-r8a7790" },
+	{ "du1", "du.1", "rcar-du-r8a7790" },
+	{ "du2", "du.2", "rcar-du-r8a7790" },
+	{ "lvds0", "lvds.0", "rcar-du-r8a7790" },
+	{ "lvds1", "lvds.1", "rcar-du-r8a7790" },
+};
 
-	clk = clk_get(NULL, "cmt0");
-	if (clk) {
-		clk_register_clkdev(clk, NULL, "sh_cmt.0");
-		clk_put(clk);
-	}
-#else
-	r8a7790_clock_init();
-#endif
+/*
+ * This is a really crude hack to work around core platform clock issues
+ */
+static const struct clk_name clk_enables[] __initconst = {
+	{ "ether", NULL, "ee700000.ethernet" },
+	{ "msiof1", NULL, "e6e10000.spi" },
+	{ "mmcif1", NULL, "ee220000.mmc" },
+	{ "qspi_mod", NULL, "e6b10000.spi" },
+	{ "sdhi0", NULL, "ee100000.sd" },
+	{ "sdhi2", NULL, "ee140000.sd" },
+	{ "thermal", NULL, "e61f0000.thermal" },
+};
 
+static void __init lager_add_standard_devices(void)
+{
+	shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
+	shmobile_clk_workaround(clk_enables, ARRAY_SIZE(clk_enables), true);
 	r8a7790_add_dt_devices();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	lager_add_du_device();
 }
 
 static const char *lager_boards_compat_dt[] __initdata = {
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index f20c10a18543..f8b1e05463cc 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -1,8 +1,9 @@
 /*
  * Lager board support
  *
- * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013-2014  Renesas Solutions Corp.
  * Copyright (C) 2013  Magnus Damm
+ * Copyright (C) 2014  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,15 +21,21 @@
 
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
+#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/camera-rcar.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/rcar-du.h>
+#include <linux/platform_data/usb-rcar-gen2-phy.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
 #include <linux/regulator/driver.h>
@@ -36,9 +43,12 @@
 #include <linux/regulator/gpio-regulator.h>
 #include <linux/regulator/machine.h>
 #include <linux/sh_eth.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/renesas_usbhs.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7790.h>
+#include <media/soc_camera.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <linux/mtd/partitions.h>
@@ -46,6 +56,33 @@
 #include <linux/spi/flash.h>
 #include <linux/spi/rspi.h>
 #include <linux/spi/spi.h>
+#include <sound/rcar_snd.h>
+#include <sound/simple_card.h>
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * this command is required when playback.
+ *
+ * # amixer set "LINEOUT Mixer DACL" on
+ */
+
+/*
+ * SDHI0 (CN8)
+ *
+ * JP3:  pin1
+ * SW20: pin1
+
+ * GP5_24:	1:  VDD  3.3V (defult)
+ *		0:  VDD  0.0V
+ * GP5_29:	1:  VccQ 3.3V (defult)
+ *		0:  VccQ 1.8V
+ *
+ */
 
 /* DU */
 static struct rcar_du_encoder_data lager_du_encoders[] = {
@@ -228,6 +265,7 @@ static const struct resource mmcif1_resources[] __initconst = {
 /* Ether */
 static const struct sh_eth_plat_data ether_pdata __initconst = {
 	.phy			= 0x1,
+	.phy_irq		= irq_pin(0),
 	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
 	.phy_interface		= PHY_INTERFACE_MODE_RMII,
 	.ether_link_active_low	= 1,
@@ -238,6 +276,17 @@ static const struct resource ether_resources[] __initconst = {
 	DEFINE_RES_IRQ(gic_spi(162)),
 };
 
+static const struct platform_device_info ether_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "r8a7790-ether",
+	.id		= -1,
+	.res		= ether_resources,
+	.num_res	= ARRAY_SIZE(ether_resources),
+	.data		= &ether_pdata,
+	.size_data	= sizeof(ether_pdata),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
 /* SPI Flash memory (Spansion S25FL512SAGMFIG11 64Mb) */
 static struct mtd_partition spi_flash_part[] = {
 	/* Reserved for user loader program, read-only */
@@ -263,7 +312,7 @@ static struct mtd_partition spi_flash_part[] = {
 	},
 };
 
-static struct flash_platform_data spi_flash_data = {
+static const struct flash_platform_data spi_flash_data = {
 	.name           = "m25p80",
 	.parts          = spi_flash_part,
 	.nr_parts       = ARRAY_SIZE(spi_flash_part),
@@ -276,21 +325,378 @@ static const struct rspi_plat_data qspi_pdata __initconst = {
 
 static const struct spi_board_info spi_info[] __initconst = {
 	{
-		.modalias               = "m25p80",
-		.platform_data          = &spi_flash_data,
-		.mode                   = SPI_MODE_0,
-		.max_speed_hz           = 30000000,
-		.bus_num                = 0,
-		.chip_select            = 0,
+		.modalias	= "m25p80",
+		.platform_data	= &spi_flash_data,
+		.mode		= SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD,
+		.max_speed_hz	= 30000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
 	},
 };
 
 /* QSPI resource */
 static const struct resource qspi_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe6b10000, 0x1000),
-	DEFINE_RES_IRQ(gic_spi(184)),
+	DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
+};
+
+/* VIN */
+static const struct resource vin_resources[] __initconst = {
+	/* VIN0 */
+	DEFINE_RES_MEM(0xe6ef0000, 0x1000),
+	DEFINE_RES_IRQ(gic_spi(188)),
+	/* VIN1 */
+	DEFINE_RES_MEM(0xe6ef1000, 0x1000),
+	DEFINE_RES_IRQ(gic_spi(189)),
 };
 
+static void __init lager_add_vin_device(unsigned idx,
+					struct rcar_vin_platform_data *pdata)
+{
+	struct platform_device_info vin_info = {
+		.parent		= &platform_bus,
+		.name		= "r8a7790-vin",
+		.id		= idx,
+		.res		= &vin_resources[idx * 2],
+		.num_res	= 2,
+		.dma_mask	= DMA_BIT_MASK(32),
+		.data		= pdata,
+		.size_data	= sizeof(*pdata),
+	};
+
+	BUG_ON(idx > 1);
+
+	platform_device_register_full(&vin_info);
+}
+
+#define LAGER_CAMERA(idx, name, addr, pdata, flag)			\
+static struct i2c_board_info i2c_cam##idx##_device = {			\
+	I2C_BOARD_INFO(name, addr),					\
+};									\
+									\
+static struct rcar_vin_platform_data vin##idx##_pdata = {		\
+	.flags = flag,							\
+};									\
+									\
+static struct soc_camera_link cam##idx##_link = {			\
+	.bus_id = idx,							\
+	.board_info = &i2c_cam##idx##_device,				\
+	.i2c_adapter_id = 2,						\
+	.module_name = name,						\
+	.priv = pdata,							\
+}
+
+/* Camera 0 is not currently supported due to adv7612 support missing */
+LAGER_CAMERA(1, "adv7180", 0x20, NULL, RCAR_VIN_BT656);
+
+static void __init lager_add_camera1_device(void)
+{
+	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1,
+				      &cam1_link, sizeof(cam1_link));
+	lager_add_vin_device(1, &vin1_pdata);
+}
+
+/* SATA1 */
+static const struct resource sata1_resources[] __initconst = {
+	DEFINE_RES_MEM(0xee500000, 0x2000),
+	DEFINE_RES_IRQ(gic_spi(106)),
+};
+
+static const struct platform_device_info sata1_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "sata-r8a7790",
+	.id		= 1,
+	.res		= sata1_resources,
+	.num_res	= ARRAY_SIZE(sata1_resources),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+/* USBHS */
+static const struct resource usbhs_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe6590000, 0x100),
+	DEFINE_RES_IRQ(gic_spi(107)),
+};
+
+struct usbhs_private {
+	struct renesas_usbhs_platform_info info;
+	struct usb_phy *phy;
+};
+
+#define usbhs_get_priv(pdev) \
+	container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
+
+static int usbhs_power_ctrl(struct platform_device *pdev,
+				void __iomem *base, int enable)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	if (!priv->phy)
+		return -ENODEV;
+
+	if (enable) {
+		int retval = usb_phy_init(priv->phy);
+
+		if (!retval)
+			retval = usb_phy_set_suspend(priv->phy, 0);
+		return retval;
+	}
+
+	usb_phy_set_suspend(priv->phy, 1);
+	usb_phy_shutdown(priv->phy);
+	return 0;
+}
+
+static int usbhs_hardware_init(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+	struct usb_phy *phy;
+	int ret;
+
+	/* USB0 Function - use PWEN as GPIO input to detect DIP Switch SW5
+	 * setting to avoid VBUS short circuit due to wrong cable.
+	 * PWEN should be pulled up high if USB Function is selected by SW5
+	 */
+	gpio_request_one(RCAR_GP_PIN(5, 18), GPIOF_IN, NULL); /* USB0_PWEN */
+	if (!gpio_get_value(RCAR_GP_PIN(5, 18))) {
+		pr_warn("Error: USB Function not selected - check SW5 + SW6\n");
+		ret = -ENOTSUPP;
+		goto error;
+	}
+
+	phy = usb_get_phy_dev(&pdev->dev, 0);
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		goto error;
+	}
+
+	priv->phy = phy;
+	return 0;
+ error:
+	gpio_free(RCAR_GP_PIN(5, 18));
+	return ret;
+}
+
+static int usbhs_hardware_exit(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	if (!priv->phy)
+		return 0;
+
+	usb_put_phy(priv->phy);
+	priv->phy = NULL;
+
+	gpio_free(RCAR_GP_PIN(5, 18));
+	return 0;
+}
+
+static int usbhs_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+static u32 lager_usbhs_pipe_type[] = {
+	USB_ENDPOINT_XFER_CONTROL,
+	USB_ENDPOINT_XFER_ISOC,
+	USB_ENDPOINT_XFER_ISOC,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_INT,
+	USB_ENDPOINT_XFER_INT,
+	USB_ENDPOINT_XFER_INT,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usbhs_private usbhs_priv __initdata = {
+	.info = {
+		.platform_callback = {
+			.power_ctrl	= usbhs_power_ctrl,
+			.hardware_init	= usbhs_hardware_init,
+			.hardware_exit	= usbhs_hardware_exit,
+			.get_id		= usbhs_get_id,
+		},
+		.driver_param = {
+			.buswait_bwait	= 4,
+			.pipe_type = lager_usbhs_pipe_type,
+			.pipe_size = ARRAY_SIZE(lager_usbhs_pipe_type),
+		},
+	}
+};
+
+static void __init lager_register_usbhs(void)
+{
+	usb_bind_phy("renesas_usbhs", 0, "usb_phy_rcar_gen2");
+	platform_device_register_resndata(&platform_bus,
+					  "renesas_usbhs", -1,
+					  usbhs_resources,
+					  ARRAY_SIZE(usbhs_resources),
+					  &usbhs_priv.info,
+					  sizeof(usbhs_priv.info));
+}
+
+/* USBHS PHY */
+static const struct rcar_gen2_phy_platform_data usbhs_phy_pdata __initconst = {
+	.chan0_pci = 0,	/* Channel 0 is USBHS */
+	.chan2_pci = 1,	/* Channel 2 is PCI USB */
+};
+
+static const struct resource usbhs_phy_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe6590100, 0x100),
+};
+
+/* I2C */
+static struct i2c_board_info i2c2_devices[] = {
+	{
+		I2C_BOARD_INFO("ak4643", 0x12),
+	}
+};
+
+/* Sound */
+static struct resource rsnd_resources[] __initdata = {
+	[RSND_GEN2_SCU]  = DEFINE_RES_MEM(0xec500000, 0x1000),
+	[RSND_GEN2_ADG]  = DEFINE_RES_MEM(0xec5a0000, 0x100),
+	[RSND_GEN2_SSIU] = DEFINE_RES_MEM(0xec540000, 0x1000),
+	[RSND_GEN2_SSI]  = DEFINE_RES_MEM(0xec541000, 0x1280),
+};
+
+static struct rsnd_ssi_platform_info rsnd_ssi[] = {
+	RSND_SSI(0, gic_spi(370), 0),
+	RSND_SSI(0, gic_spi(371), RSND_SSI_CLK_PIN_SHARE),
+};
+
+static struct rsnd_src_platform_info rsnd_src[2] = {
+	/* no member at this point */
+};
+
+static struct rsnd_dai_platform_info rsnd_dai = {
+	.playback = { .ssi = &rsnd_ssi[0], },
+	.capture  = { .ssi = &rsnd_ssi[1], },
+};
+
+static struct rcar_snd_info rsnd_info = {
+	.flags		= RSND_GEN2,
+	.ssi_info	= rsnd_ssi,
+	.ssi_info_nr	= ARRAY_SIZE(rsnd_ssi),
+	.src_info	= rsnd_src,
+	.src_info_nr	= ARRAY_SIZE(rsnd_src),
+	.dai_info	= &rsnd_dai,
+	.dai_info_nr	= 1,
+};
+
+static struct asoc_simple_card_info rsnd_card_info = {
+	.name		= "AK4643",
+	.card		= "SSI01-AK4643",
+	.codec		= "ak4642-codec.2-0012",
+	.platform	= "rcar_sound",
+	.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
+	.cpu_dai = {
+		.name	= "rcar_sound",
+	},
+	.codec_dai = {
+		.name	= "ak4642-hifi",
+		.sysclk	= 11289600,
+	},
+};
+
+static void __init lager_add_rsnd_device(void)
+{
+	struct platform_device_info cardinfo = {
+		.parent         = &platform_bus,
+		.name           = "asoc-simple-card",
+		.id             = -1,
+		.data           = &rsnd_card_info,
+		.size_data      = sizeof(struct asoc_simple_card_info),
+		.dma_mask       = DMA_BIT_MASK(32),
+	};
+
+	i2c_register_board_info(2, i2c2_devices,
+				ARRAY_SIZE(i2c2_devices));
+
+	platform_device_register_resndata(
+		&platform_bus, "rcar_sound", -1,
+		rsnd_resources, ARRAY_SIZE(rsnd_resources),
+		&rsnd_info, sizeof(rsnd_info));
+
+	platform_device_register_full(&cardinfo);
+}
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
+			  TMIO_MMC_WRPROTECT_DISABLE,
+};
+
+static struct resource sdhi0_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee100000, 0x200),
+	DEFINE_RES_IRQ(gic_spi(165)),
+};
+
+/* SDHI2 */
+static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
+			  TMIO_MMC_WRPROTECT_DISABLE,
+};
+
+static struct resource sdhi2_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee140000, 0x100),
+	DEFINE_RES_IRQ(gic_spi(167)),
+};
+
+/* Internal PCI1 */
+static const struct resource pci1_resources[] __initconst = {
+	DEFINE_RES_MEM(0xee0b0000, 0x10000),	/* CFG */
+	DEFINE_RES_MEM(0xee0a0000, 0x10000),	/* MEM */
+	DEFINE_RES_IRQ(gic_spi(112)),
+};
+
+static const struct platform_device_info pci1_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "pci-rcar-gen2",
+	.id		= 1,
+	.res		= pci1_resources,
+	.num_res	= ARRAY_SIZE(pci1_resources),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+static void __init lager_add_usb1_device(void)
+{
+	platform_device_register_full(&pci1_info);
+}
+
+/* Internal PCI2 */
+static const struct resource pci2_resources[] __initconst = {
+	DEFINE_RES_MEM(0xee0d0000, 0x10000),	/* CFG */
+	DEFINE_RES_MEM(0xee0c0000, 0x10000),	/* MEM */
+	DEFINE_RES_IRQ(gic_spi(113)),
+};
+
+static const struct platform_device_info pci2_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "pci-rcar-gen2",
+	.id		= 2,
+	.res		= pci2_resources,
+	.num_res	= ARRAY_SIZE(pci2_resources),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+static void __init lager_add_usb2_device(void)
+{
+	platform_device_register_full(&pci2_info);
+}
+
 static const struct pinctrl_map lager_pinctrl_map[] = {
 	/* DU (CN10: ARGB0, CN13: LVDS) */
 	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
@@ -299,12 +705,43 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
 				  "du_sync_1", "du"),
 	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
 				  "du_clk_out_0", "du"),
+	/* I2C2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar.2", "pfc-r8a7790",
+				  "i2c2", "i2c2"),
+	/* QSPI */
+	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
+				  "qspi_ctrl", "qspi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
+				  "qspi_data4", "qspi"),
 	/* SCIF0 (CN19: DEBUG SERIAL0) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
 				  "scif0_data", "scif0"),
 	/* SCIF1 (CN20: DEBUG SERIAL1) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
 				  "scif1_data", "scif1"),
+	/* SDHI0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
+				  "sdhi0_data4", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
+				  "sdhi0_ctrl", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
+				  "sdhi0_cd", "sdhi0"),
+	/* SDHI2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
+				  "sdhi2_data4", "sdhi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
+				  "sdhi2_ctrl", "sdhi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
+				  "sdhi2_cd", "sdhi2"),
+	/* SSI (CN17: sound) */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
+				  "ssi0129_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
+				  "ssi0_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
+				  "ssi1_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
+				  "audio_clk_a", "audio_clk"),
 	/* MMCIF1 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
 				  "mmc1_data8", "mmc1"),
@@ -319,6 +756,31 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
 				  "eth_rmii", "eth"),
 	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
 				  "intc_irq0", "intc"),
+	/* VIN0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
+				  "vin0_data24", "vin0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
+				  "vin0_sync", "vin0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
+				  "vin0_field", "vin0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
+				  "vin0_clkenb", "vin0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
+				  "vin0_clk", "vin0"),
+	/* VIN1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
+				  "vin1_data8", "vin1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
+				  "vin1_clk", "vin1"),
+	/* USB0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7790",
+				  "usb0_ovc_vbus", "usb0"),
+	/* USB1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.1", "pfc-r8a7790",
+				  "usb1", "usb1"),
+	/* USB2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.2", "pfc-r8a7790",
+				  "usb2", "usb2"),
 };
 
 static void __init lager_add_standard_devices(void)
@@ -346,10 +808,7 @@ static void __init lager_add_standard_devices(void)
 					  mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
 					  &mmcif1_pdata, sizeof(mmcif1_pdata));
 
-	platform_device_register_resndata(&platform_bus, "r8a7790-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  &ether_pdata, sizeof(ether_pdata));
+	platform_device_register_full(&ether_info);
 
 	lager_add_du_device();
 
@@ -368,6 +827,28 @@ static void __init lager_add_standard_devices(void)
 				      &vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
 	platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++,
 				      &vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
+
+	lager_add_camera1_device();
+
+	platform_device_register_full(&sata1_info);
+
+	platform_device_register_resndata(&platform_bus, "usb_phy_rcar_gen2",
+					  -1, usbhs_phy_resources,
+					  ARRAY_SIZE(usbhs_phy_resources),
+					  &usbhs_phy_pdata,
+					  sizeof(usbhs_phy_pdata));
+	lager_register_usbhs();
+	lager_add_usb1_device();
+	lager_add_usb2_device();
+
+	lager_add_rsnd_device();
+
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
+					  sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
+					  &sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 2,
+					  sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
+					  &sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
 }
 
 /*
@@ -391,6 +872,8 @@ static void __init lager_init(void)
 {
 	lager_add_standard_devices();
 
+	irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
+
 	if (IS_ENABLED(CONFIG_PHYLIB))
 		phy_register_fixup_for_id("r8a7790-ether-ff:01",
 					  lager_ksz8041_fixup);
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 3aba0372f630..0ff4d8e45cf7 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -509,9 +509,9 @@ static struct asoc_simple_card_info fsi2_hdmi_info = {
 	.card		= "FSI2B-HDMI",
 	.codec		= "sh-mobile-hdmi",
 	.platform	= "sh_fsi2",
+	.daifmt		= SND_SOC_DAIFMT_CBS_CFS,
 	.cpu_dai = {
 		.name	= "fsib-dai",
-		.fmt	= SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF,
 	},
 	.codec_dai = {
 		.name	= "sh_mobile_hdmi-hifi",
@@ -905,14 +905,12 @@ static struct asoc_simple_card_info fsi2_ak4643_info = {
 	.card		= "FSI2A-AK4643",
 	.codec		= "ak4642-codec.0-0013",
 	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_LEFT_J,
+	.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
 	.cpu_dai = {
 		.name	= "fsia-dai",
-		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
 	},
 	.codec_dai = {
 		.name	= "ak4642-hifi",
-		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
 		.sysclk	= 11289600,
 	},
 };
diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c
deleted file mode 100644
index 5ac13ba71d54..000000000000
--- a/arch/arm/mach-shmobile/clock-emev2.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Emma Mobile EV2 clock framework support
- *
- * Copyright (C) 2012  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <mach/common.h>
-
-#define EMEV2_SMU_BASE 0xe0110000
-
-/* EMEV2 SMU registers */
-#define USIAU0_RSTCTRL 0x094
-#define USIBU1_RSTCTRL 0x0ac
-#define USIBU2_RSTCTRL 0x0b0
-#define USIBU3_RSTCTRL 0x0b4
-#define STI_RSTCTRL 0x124
-#define USIAU0GCLKCTRL 0x4a0
-#define USIBU1GCLKCTRL 0x4b8
-#define USIBU2GCLKCTRL 0x4bc
-#define USIBU3GCLKCTRL 0x04c0
-#define STIGCLKCTRL 0x528
-#define USIAU0SCLKDIV 0x61c
-#define USIB2SCLKDIV 0x65c
-#define USIB3SCLKDIV 0x660
-#define STI_CLKSEL 0x688
-
-/* not pretty, but hey */
-static void __iomem *smu_base;
-
-static void emev2_smu_write(unsigned long value, int offs)
-{
-	BUG_ON(!smu_base || (offs >= PAGE_SIZE));
-	iowrite32(value, smu_base + offs);
-}
-
-static struct clk_mapping smu_mapping = {
-	.phys	= EMEV2_SMU_BASE,
-	.len	= PAGE_SIZE,
-};
-
-/* Fixed 32 KHz root clock from C32K pin */
-static struct clk c32k_clk = {
-	.rate           = 32768,
-	.mapping	= &smu_mapping,
-};
-
-/* PLL3 multiplies C32K with 7000 */
-static unsigned long pll3_recalc(struct clk *clk)
-{
-	return clk->parent->rate * 7000;
-}
-
-static struct sh_clk_ops pll3_clk_ops = {
-	.recalc		= pll3_recalc,
-};
-
-static struct clk pll3_clk = {
-	.ops		= &pll3_clk_ops,
-	.parent		= &c32k_clk,
-};
-
-static struct clk *main_clks[] = {
-	&c32k_clk,
-	&pll3_clk,
-};
-
-enum { SCLKDIV_USIAU0, SCLKDIV_USIBU2, SCLKDIV_USIBU1, SCLKDIV_USIBU3,
-	SCLKDIV_NR };
-
-#define SCLKDIV(_reg, _shift)			\
-{								\
-	.parent		= &pll3_clk,				\
-	.enable_reg	= IOMEM(EMEV2_SMU_BASE + (_reg)),	\
-	.enable_bit	= _shift,				\
-}
-
-static struct clk sclkdiv_clks[SCLKDIV_NR] = {
-	[SCLKDIV_USIAU0] = SCLKDIV(USIAU0SCLKDIV, 0),
-	[SCLKDIV_USIBU2] = SCLKDIV(USIB2SCLKDIV, 16),
-	[SCLKDIV_USIBU1] = SCLKDIV(USIB2SCLKDIV, 0),
-	[SCLKDIV_USIBU3] = SCLKDIV(USIB3SCLKDIV, 0),
-};
-
-enum { GCLK_USIAU0_SCLK, GCLK_USIBU1_SCLK, GCLK_USIBU2_SCLK, GCLK_USIBU3_SCLK,
-	GCLK_STI_SCLK,
-	GCLK_NR };
-
-#define GCLK_SCLK(_parent, _reg) \
-{								\
-	.parent		= _parent,				\
-	.enable_reg	= IOMEM(EMEV2_SMU_BASE + (_reg)),	\
-	.enable_bit	= 1, /* SCLK_GCC */			\
-}
-
-static struct clk gclk_clks[GCLK_NR] = {
-	[GCLK_USIAU0_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIAU0],
-				       USIAU0GCLKCTRL),
-	[GCLK_USIBU1_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU1],
-				       USIBU1GCLKCTRL),
-	[GCLK_USIBU2_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU2],
-				       USIBU2GCLKCTRL),
-	[GCLK_USIBU3_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU3],
-				       USIBU3GCLKCTRL),
-	[GCLK_STI_SCLK] = GCLK_SCLK(&c32k_clk, STIGCLKCTRL),
-};
-
-static int emev2_gclk_enable(struct clk *clk)
-{
-	iowrite32(ioread32(clk->mapped_reg) | (1 << clk->enable_bit),
-		  clk->mapped_reg);
-	return 0;
-}
-
-static void emev2_gclk_disable(struct clk *clk)
-{
-	iowrite32(ioread32(clk->mapped_reg) & ~(1 << clk->enable_bit),
-		  clk->mapped_reg);
-}
-
-static struct sh_clk_ops emev2_gclk_clk_ops = {
-	.enable		= emev2_gclk_enable,
-	.disable	= emev2_gclk_disable,
-	.recalc		= followparent_recalc,
-};
-
-static int __init emev2_gclk_register(struct clk *clks, int nr)
-{
-	struct clk *clkp;
-	int ret = 0;
-	int k;
-
-	for (k = 0; !ret && (k < nr); k++) {
-		clkp = clks + k;
-		clkp->ops = &emev2_gclk_clk_ops;
-		ret |= clk_register(clkp);
-	}
-
-	return ret;
-}
-
-static unsigned long emev2_sclkdiv_recalc(struct clk *clk)
-{
-	unsigned int sclk_div;
-
-	sclk_div = (ioread32(clk->mapped_reg) >> clk->enable_bit) & 0xff;
-
-	return clk->parent->rate / (sclk_div + 1);
-}
-
-static struct sh_clk_ops emev2_sclkdiv_clk_ops = {
-	.recalc		= emev2_sclkdiv_recalc,
-};
-
-static int __init emev2_sclkdiv_register(struct clk *clks, int nr)
-{
-	struct clk *clkp;
-	int ret = 0;
-	int k;
-
-	for (k = 0; !ret && (k < nr); k++) {
-		clkp = clks + k;
-		clkp->ops = &emev2_sclkdiv_clk_ops;
-		ret |= clk_register(clkp);
-	}
-
-	return ret;
-}
-
-static struct clk_lookup lookups[] = {
-	CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]),
-	CLKDEV_DEV_ID("e1020000.uart", &gclk_clks[GCLK_USIAU0_SCLK]),
-	CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]),
-	CLKDEV_DEV_ID("e1030000.uart", &gclk_clks[GCLK_USIBU1_SCLK]),
-	CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]),
-	CLKDEV_DEV_ID("e1040000.uart", &gclk_clks[GCLK_USIBU2_SCLK]),
-	CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]),
-	CLKDEV_DEV_ID("e1050000.uart", &gclk_clks[GCLK_USIBU3_SCLK]),
-	CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]),
-	CLKDEV_DEV_ID("e0180000.sti", &gclk_clks[GCLK_STI_SCLK]),
-};
-
-void __init emev2_clock_init(void)
-{
-	int k, ret = 0;
-
-	smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
-	BUG_ON(!smu_base);
-
-	/* setup STI timer to run on 32.768 kHz and deassert reset */
-	emev2_smu_write(0, STI_CLKSEL);
-	emev2_smu_write(1, STI_RSTCTRL);
-
-	/* deassert reset for UART0->UART3 */
-	emev2_smu_write(2, USIAU0_RSTCTRL);
-	emev2_smu_write(2, USIBU1_RSTCTRL);
-	emev2_smu_write(2, USIBU2_RSTCTRL);
-	emev2_smu_write(2, USIBU3_RSTCTRL);
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = emev2_sclkdiv_register(sclkdiv_clks, SCLKDIV_NR);
-
-	if (!ret)
-		ret = emev2_gclk_register(gclk_clks, GCLK_NR);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup emev2 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
index e6ab0cd5b286..df187484de5d 100644
--- a/arch/arm/mach-shmobile/clock-r7s72100.c
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -22,12 +22,15 @@
 #include <mach/common.h>
 #include <mach/r7s72100.h>
 
-/* registers */
+/* Frequency Control Registers */
 #define FRQCR		0xfcfe0010
 #define FRQCR2		0xfcfe0014
+/* Standby Control Registers */
 #define STBCR3		0xfcfe0420
 #define STBCR4		0xfcfe0424
+#define STBCR7		0xfcfe0430
 #define STBCR9		0xfcfe0438
+#define STBCR10		0xfcfe043c
 
 #define PLL_RATE 30
 
@@ -67,7 +70,7 @@ static struct clk pll_clk = {
 
 static unsigned long bus_recalc(struct clk *clk)
 {
-	return clk->parent->rate * 2 / 3;
+	return clk->parent->rate / 3;
 }
 
 static struct sh_clk_ops bus_clk_ops = {
@@ -145,15 +148,25 @@ struct clk div4_clks[DIV4_NR] = {
 					| CLK_ENABLE_ON_INIT),
 };
 
-enum {	MSTP97, MSTP96, MSTP95, MSTP94,
+enum {
+	MSTP107, MSTP106, MSTP105, MSTP104, MSTP103,
+	MSTP97, MSTP96, MSTP95, MSTP94,
+	MSTP74,
 	MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
-	MSTP33,	MSTP_NR };
+	MSTP33,	MSTP_NR
+};
 
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP107] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 7, 0), /* RSPI0 */
+	[MSTP106] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 6, 0), /* RSPI1 */
+	[MSTP105] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 5, 0), /* RSPI2 */
+	[MSTP104] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 4, 0), /* RSPI3 */
+	[MSTP103] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 3, 0), /* RSPI4 */
 	[MSTP97] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 7, 0), /* RIIC0 */
 	[MSTP96] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 6, 0), /* RIIC1 */
 	[MSTP95] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 5, 0), /* RIIC2 */
 	[MSTP94] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 4, 0), /* RIIC3 */
+	[MSTP74] = SH_CLK_MSTP8(&peripheral1_clk, STBCR7, 4, 0), /* Ether */
 	[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
 	[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
 	[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
@@ -176,7 +189,12 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
 
 	/* MSTP clocks */
-	CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),
+	CLKDEV_DEV_ID("rspi-rz.0", &mstp_clks[MSTP107]),
+	CLKDEV_DEV_ID("rspi-rz.1", &mstp_clks[MSTP106]),
+	CLKDEV_DEV_ID("rspi-rz.2", &mstp_clks[MSTP105]),
+	CLKDEV_DEV_ID("rspi-rz.3", &mstp_clks[MSTP104]),
+	CLKDEV_DEV_ID("rspi-rz.4", &mstp_clks[MSTP103]),
+	CLKDEV_DEV_ID("r7s72100-ether", &mstp_clks[MSTP74]),
 
 	/* ICK */
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
@@ -187,6 +205,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
+	CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP33]),
 };
 
 void __init r7s72100_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 7348d58f500e..b5bc22c6a858 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -597,7 +597,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]),
 	CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]),
 	CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]),
-	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
+	CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.1", &mstp_clks[MSTP329]),
 	CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]),
 	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]),
 	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index dd989f93498f..50931e3c97c7 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -548,15 +548,9 @@ static struct clk_lookup lookups[] = {
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0",	&mstp_clks[MSTP100]),
-	CLKDEV_DEV_ID("sh_tmu.3",		&mstp_clks[MSTP111]),
-	CLKDEV_DEV_ID("sh_tmu.4",		&mstp_clks[MSTP111]),
-	CLKDEV_DEV_ID("sh_tmu.5",		&mstp_clks[MSTP111]),
 	CLKDEV_DEV_ID("i2c-sh_mobile.0",	&mstp_clks[MSTP116]),
 	CLKDEV_DEV_ID("fff20000.i2c",		&mstp_clks[MSTP116]),
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1",	&mstp_clks[MSTP117]),
-	CLKDEV_DEV_ID("sh_tmu.0",		&mstp_clks[MSTP125]),
-	CLKDEV_DEV_ID("sh_tmu.1",		&mstp_clks[MSTP125]),
-	CLKDEV_DEV_ID("sh_tmu.2",		&mstp_clks[MSTP125]),
 	CLKDEV_DEV_ID("sh_mobile_ceu.0",	&mstp_clks[MSTP127]),
 	CLKDEV_DEV_ID("sh_mobile_ceu.1",	&mstp_clks[MSTP128]),
 
@@ -583,7 +577,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.6",		&mstp_clks[MSTP230]),
 	CLKDEV_DEV_ID("e6cc0000.sci",		&mstp_clks[MSTP230]),
 
-	CLKDEV_DEV_ID("sh_cmt.10",		&mstp_clks[MSTP329]),
 	CLKDEV_DEV_ID("sh_fsi2",		&mstp_clks[MSTP328]),
 	CLKDEV_DEV_ID("fe1f0000.sound",		&mstp_clks[MSTP328]),
 	CLKDEV_DEV_ID("i2c-sh_mobile.1",	&mstp_clks[MSTP323]),
@@ -596,7 +589,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mmcif",		&mstp_clks[MSTP312]),
 	CLKDEV_DEV_ID("e6bd0000.mmc",		&mstp_clks[MSTP312]),
 	CLKDEV_DEV_ID("r8a7740-gether",		&mstp_clks[MSTP309]),
-	CLKDEV_DEV_ID("e9a00000.sh-eth",	&mstp_clks[MSTP309]),
+	CLKDEV_DEV_ID("e9a00000.ethernet",	&mstp_clks[MSTP309]),
 	CLKDEV_DEV_ID("renesas-tpu-pwm",	&mstp_clks[MSTP304]),
 	CLKDEV_DEV_ID("e6600000.pwm",		&mstp_clks[MSTP304]),
 
@@ -604,6 +597,9 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("e6870000.sd",		&mstp_clks[MSTP415]),
 
 	/* ICK */
+	CLKDEV_ICK_ID("fck",	"sh-tmu.1",		&mstp_clks[MSTP111]),
+	CLKDEV_ICK_ID("fck",	"sh-tmu.0",		&mstp_clks[MSTP125]),
+	CLKDEV_ICK_ID("fck",	"sh-cmt-48.1",		&mstp_clks[MSTP329]),
 	CLKDEV_ICK_ID("host",	"renesas_usbhs",	&mstp_clks[MSTP416]),
 	CLKDEV_ICK_ID("func",	"renesas_usbhs",	&mstp_clks[MSTP407]),
 	CLKDEV_ICK_ID("phy",	"renesas_usbhs",	&mstp_clks[MSTP406]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index 9783945f8bc7..13f8f3ab8840 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -170,15 +170,11 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
 	[MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  9, 0), /* SSI3 */
 	[MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  8, 0), /* SRU */
-	[MSTP007] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  7, 0), /* HSPI */
+	[MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0,  7, 0), /* HSPI */
 };
 
 static struct clk_lookup lookups[] = {
 	/* main */
-	CLKDEV_CON_ID("audio_clk_a",	&audio_clk_a),
-	CLKDEV_CON_ID("audio_clk_b",	&audio_clk_b),
-	CLKDEV_CON_ID("audio_clk_c",	&audio_clk_c),
-	CLKDEV_CON_ID("audio_clk_internal",	&s1_clk),
 	CLKDEV_CON_ID("shyway_clk",	&s_clk),
 	CLKDEV_CON_ID("peripheral_clk",	&p_clk),
 
@@ -211,8 +207,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
-	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
-	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
 	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
 	CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
 	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
@@ -221,6 +215,10 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
 	CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
 
+	CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a),
+	CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
+	CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
+	CLKDEV_ICK_ID("clk_i", "rcar_sound", &s1_clk),
 	CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
 	CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
 	CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
@@ -230,15 +228,17 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
 	CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
 	CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
-	CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP531]),
-	CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP530]),
-	CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP529]),
-	CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP528]),
-	CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP527]),
-	CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP526]),
-	CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP525]),
-	CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP524]),
-	CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP523]),
+	CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]),
+	CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]),
+	CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]),
+	CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]),
+	CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]),
+	CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]),
+	CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]),
+	CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]),
+	CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
 };
 
 void __init r8a7778_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index f1fb89b76786..a13298bd37a8 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -47,17 +47,10 @@
 
 #define MD(nr)	BIT(nr)
 
-#define FRQMR		IOMEM(0xffc80014)
 #define MSTPCR0		IOMEM(0xffc80030)
 #define MSTPCR1		IOMEM(0xffc80034)
 #define MSTPCR3		IOMEM(0xffc8003c)
 #define MSTPSR1		IOMEM(0xffc80044)
-#define MSTPSR4		IOMEM(0xffc80048)
-#define MSTPSR6		IOMEM(0xffc8004c)
-#define MSTPCR4		IOMEM(0xffc80050)
-#define MSTPCR5		IOMEM(0xffc80054)
-#define MSTPCR6		IOMEM(0xffc80058)
-#define MSTPCR7		IOMEM(0xffc80040)
 
 #define MODEMR		0xffcc0020
 
@@ -127,16 +120,16 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP322] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */
 	[MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */
-	[MSTP120] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 20, 0), /* VIN3 */
-	[MSTP116] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 16, 0), /* PCIe */
-	[MSTP115] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 15, 0), /* SATA */
-	[MSTP114] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 14, 0), /* Ether */
-	[MSTP110] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 10, 0), /* VIN0 */
-	[MSTP109] = SH_CLK_MSTP32(&clks_clk, MSTPCR1,  9, 0), /* VIN1 */
-	[MSTP108] = SH_CLK_MSTP32(&clks_clk, MSTPCR1,  8, 0), /* VIN2 */
-	[MSTP103] = SH_CLK_MSTP32(&clks_clk, MSTPCR1,  3, 0), /* DU */
-	[MSTP101] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1,  1, 0), /* USB2 */
-	[MSTP100] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1,  0, 0), /* USB0/1 */
+	[MSTP120] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 20, MSTPSR1, 0), /* VIN3 */
+	[MSTP116] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 16, MSTPSR1, 0), /* PCIe */
+	[MSTP115] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 15, MSTPSR1, 0), /* SATA */
+	[MSTP114] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 14, MSTPSR1, 0), /* Ether */
+	[MSTP110] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 10, MSTPSR1, 0), /* VIN0 */
+	[MSTP109] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1,  9, MSTPSR1, 0), /* VIN1 */
+	[MSTP108] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1,  8, MSTPSR1, 0), /* VIN2 */
+	[MSTP103] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1,  3, MSTPSR1, 0), /* DU */
+	[MSTP101] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1,  1, MSTPSR1, 0), /* USB2 */
+	[MSTP100] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1,  0, MSTPSR1, 0), /* USB0/1 */
 	[MSTP030] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 30, 0), /* I2C0 */
 	[MSTP029] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 29, 0), /* I2C1 */
 	[MSTP028] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 28, 0), /* I2C2 */
@@ -180,9 +173,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */
 	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
 	CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
-	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
-	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
-	CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP016]), /* TMU02 */
+	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]), /* TMU0 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
 	CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
 	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index f44987a92ad4..296a057109e4 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -43,17 +43,26 @@
  *	see "p1 / 2" on R8A7790_CLOCK_ROOT() below
  */
 
-#define CPG_BASE 0xe6150000
-#define CPG_LEN 0x1000
-
-#define SMSTPCR1 0xe6150134
-#define SMSTPCR2 0xe6150138
-#define SMSTPCR3 0xe615013c
-#define SMSTPCR5 0xe6150144
-#define SMSTPCR7 0xe615014c
-#define SMSTPCR8 0xe6150990
-#define SMSTPCR9 0xe6150994
-#define SMSTPCR10 0xe6150998
+#define CPG_BASE	0xe6150000
+#define CPG_LEN		0x1000
+
+#define SMSTPCR1	0xe6150134
+#define SMSTPCR2	0xe6150138
+#define SMSTPCR3	0xe615013c
+#define SMSTPCR5	0xe6150144
+#define SMSTPCR7	0xe615014c
+#define SMSTPCR8	0xe6150990
+#define SMSTPCR9	0xe6150994
+#define SMSTPCR10	0xe6150998
+
+#define MSTPSR1		IOMEM(0xe6150038)
+#define MSTPSR2		IOMEM(0xe6150040)
+#define MSTPSR3		IOMEM(0xe6150048)
+#define MSTPSR5		IOMEM(0xe615003c)
+#define MSTPSR7		IOMEM(0xe61501c4)
+#define MSTPSR8		IOMEM(0xe61509a0)
+#define MSTPSR9		IOMEM(0xe61509a4)
+#define MSTPSR10	IOMEM(0xe61509a8)
 
 #define SDCKCR		0xE6150074
 #define SD2CKCR		0xE6150078
@@ -82,6 +91,15 @@ static struct clk main_clk = {
 	.ops	= &followparent_clk_ops,
 };
 
+static struct clk audio_clk_a = {
+};
+
+static struct clk audio_clk_b = {
+};
+
+static struct clk audio_clk_c = {
+};
+
 /*
  * clock ratio of these clock will be updated
  * on r8a7790_clock_init()
@@ -115,6 +133,9 @@ SH_FIXED_RATIO_CLK_SET(ddr_clk,			pll3_clk,	1, 8);
 SH_FIXED_RATIO_CLK_SET(mp_clk,			pll1_div2_clk,	1, 15);
 
 static struct clk *main_clks[] = {
+	&audio_clk_a,
+	&audio_clk_b,
+	&audio_clk_c,
 	&extal_clk,
 	&extal_div2_clk,
 	&main_clk,
@@ -183,15 +204,22 @@ static struct clk div6_clks[DIV6_NR] = {
 
 /* MSTP */
 enum {
+	MSTP1017, /* parent of SCU */
+
+	MSTP1031, MSTP1030,
+	MSTP1029, MSTP1028, MSTP1027, MSTP1026, MSTP1025, MSTP1024, MSTP1023, MSTP1022,
 	MSTP1015, MSTP1014, MSTP1013, MSTP1012, MSTP1011, MSTP1010,
 	MSTP1009, MSTP1008, MSTP1007, MSTP1006, MSTP1005,
 	MSTP931, MSTP930, MSTP929, MSTP928,
 	MSTP917,
+	MSTP815, MSTP814,
 	MSTP813,
+	MSTP811, MSTP810, MSTP809, MSTP808,
 	MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
 	MSTP717, MSTP716,
-	MSTP704,
+	MSTP704, MSTP703,
 	MSTP522,
+	MSTP502, MSTP501,
 	MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
 	MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
 	MSTP124,
@@ -199,48 +227,68 @@ enum {
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP1015] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 15, 0), /* SSI0 */
-	[MSTP1014] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 14, 0), /* SSI1 */
-	[MSTP1013] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 13, 0), /* SSI2 */
-	[MSTP1012] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 12, 0), /* SSI3 */
-	[MSTP1011] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 11, 0), /* SSI4 */
-	[MSTP1010] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 10, 0), /* SSI5 */
-	[MSTP1009] = SH_CLK_MSTP32(&p_clk, SMSTPCR10,  9, 0), /* SSI6 */
-	[MSTP1008] = SH_CLK_MSTP32(&p_clk, SMSTPCR10,  8, 0), /* SSI7 */
-	[MSTP1007] = SH_CLK_MSTP32(&p_clk, SMSTPCR10,  7, 0), /* SSI8 */
-	[MSTP1006] = SH_CLK_MSTP32(&p_clk, SMSTPCR10,  6, 0), /* SSI9 */
-	[MSTP1005] = SH_CLK_MSTP32(&p_clk, SMSTPCR10,  5, 0), /* SSI ALL */
-	[MSTP931] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 31, 0), /* I2C0 */
-	[MSTP930] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 30, 0), /* I2C1 */
-	[MSTP929] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 29, 0), /* I2C2 */
-	[MSTP928] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 28, 0), /* I2C3 */
-	[MSTP917] = SH_CLK_MSTP32(&qspi_clk, SMSTPCR9, 17, 0), /* QSPI */
-	[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
-	[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
-	[MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */
-	[MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
-	[MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
-	[MSTP722] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 22, 0), /* DU2 */
-	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
-	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
-	[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
-	[MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
-	[MSTP704] = SH_CLK_MSTP32(&mp_clk, SMSTPCR7, 4, 0), /* HSUSB */
-	[MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
-	[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */
-	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */
-	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_SD1], SMSTPCR3, 13, 0), /* SDHI1 */
-	[MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SD2], SMSTPCR3, 12, 0), /* SDHI2 */
-	[MSTP311] = SH_CLK_MSTP32(&div6_clks[DIV6_SD3], SMSTPCR3, 11, 0), /* SDHI3 */
-	[MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1], SMSTPCR3, 5, 0), /* MMC1 */
-	[MSTP304] = SH_CLK_MSTP32(&cp_clk, SMSTPCR3, 4, 0), /* TPU0 */
-	[MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
-	[MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
-	[MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
-	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
-	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
-	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
-	[MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
+	[MSTP1031] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 31, MSTPSR10, 0), /* SCU0 */
+	[MSTP1030] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 30, MSTPSR10, 0), /* SCU1 */
+	[MSTP1029] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 29, MSTPSR10, 0), /* SCU2 */
+	[MSTP1028] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 28, MSTPSR10, 0), /* SCU3 */
+	[MSTP1027] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 27, MSTPSR10, 0), /* SCU4 */
+	[MSTP1026] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 26, MSTPSR10, 0), /* SCU5 */
+	[MSTP1025] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 25, MSTPSR10, 0), /* SCU6 */
+	[MSTP1024] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 24, MSTPSR10, 0), /* SCU7 */
+	[MSTP1023] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 23, MSTPSR10, 0), /* SCU8 */
+	[MSTP1022] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 22, MSTPSR10, 0), /* SCU9 */
+	[MSTP1017] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 17, MSTPSR10, 0), /* SCU */
+	[MSTP1015] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 15, MSTPSR10, 0), /* SSI0 */
+	[MSTP1014] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 14, MSTPSR10, 0), /* SSI1 */
+	[MSTP1013] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 13, MSTPSR10, 0), /* SSI2 */
+	[MSTP1012] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 12, MSTPSR10, 0), /* SSI3 */
+	[MSTP1011] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 11, MSTPSR10, 0), /* SSI4 */
+	[MSTP1010] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 10, MSTPSR10, 0), /* SSI5 */
+	[MSTP1009] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 9, MSTPSR10, 0), /* SSI6 */
+	[MSTP1008] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 8, MSTPSR10, 0), /* SSI7 */
+	[MSTP1007] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 7, MSTPSR10, 0), /* SSI8 */
+	[MSTP1006] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 6, MSTPSR10, 0), /* SSI9 */
+	[MSTP1005] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 5, MSTPSR10, 0), /* SSI ALL */
+	[MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
+	[MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
+	[MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
+	[MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
+	[MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
+	[MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
+	[MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
+	[MSTP813] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR8, 13, MSTPSR8, 0), /* Ether */
+	[MSTP811] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 11, MSTPSR8, 0), /* VIN0 */
+	[MSTP810] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 10, MSTPSR8, 0), /* VIN1 */
+	[MSTP809] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8,  9, MSTPSR8, 0), /* VIN2 */
+	[MSTP808] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8,  8, MSTPSR8, 0), /* VIN3 */
+	[MSTP726] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 26, MSTPSR7, 0), /* LVDS0 */
+	[MSTP725] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 25, MSTPSR7, 0), /* LVDS1 */
+	[MSTP724] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 24, MSTPSR7, 0), /* DU0 */
+	[MSTP723] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 23, MSTPSR7, 0), /* DU1 */
+	[MSTP722] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 22, MSTPSR7, 0), /* DU2 */
+	[MSTP721] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 21, MSTPSR7, 0), /* SCIF0 */
+	[MSTP720] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 20, MSTPSR7, 0), /* SCIF1 */
+	[MSTP717] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR7, 17, MSTPSR7, 0), /* HSCIF0 */
+	[MSTP716] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR7, 16, MSTPSR7, 0), /* HSCIF1 */
+	[MSTP704] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR7, 4, MSTPSR7, 0), /* HSUSB */
+	[MSTP703] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR7, 3, MSTPSR7, 0), /* EHCI */
+	[MSTP522] = SH_CLK_MSTP32_STS(&extal_clk, SMSTPCR5, 22, MSTPSR5, 0), /* Thermal */
+	[MSTP502] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR5, 2, MSTPSR5, 0), /* Audio-DMAC low */
+	[MSTP501] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR5, 1, MSTPSR5, 0), /* Audio-DMAC hi */
+	[MSTP315] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, MSTPSR3, 0), /* MMC0 */
+	[MSTP314] = SH_CLK_MSTP32_STS(&div4_clks[DIV4_SD0], SMSTPCR3, 14, MSTPSR3, 0), /* SDHI0 */
+	[MSTP313] = SH_CLK_MSTP32_STS(&div4_clks[DIV4_SD1], SMSTPCR3, 13, MSTPSR3, 0), /* SDHI1 */
+	[MSTP312] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD2], SMSTPCR3, 12, MSTPSR3, 0), /* SDHI2 */
+	[MSTP311] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD3], SMSTPCR3, 11, MSTPSR3, 0), /* SDHI3 */
+	[MSTP305] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_MMC1], SMSTPCR3, 5, MSTPSR3, 0), /* MMC1 */
+	[MSTP304] = SH_CLK_MSTP32_STS(&cp_clk, SMSTPCR3, 4, MSTPSR3, 0), /* TPU0 */
+	[MSTP216] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 16, MSTPSR2, 0), /* SCIFB2 */
+	[MSTP207] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 7, MSTPSR2, 0), /* SCIFB1 */
+	[MSTP206] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 6, MSTPSR2, 0), /* SCIFB0 */
+	[MSTP204] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 4, MSTPSR2, 0), /* SCIFA0 */
+	[MSTP203] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 3, MSTPSR2, 0), /* SCIFA1 */
+	[MSTP202] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 2, MSTPSR2, 0), /* SCIFA2 */
+	[MSTP124] = SH_CLK_MSTP32_STS(&rclk_clk, SMSTPCR1, 24, MSTPSR1, 0), /* CMT0 */
 };
 
 static struct clk_lookup lookups[] = {
@@ -291,40 +339,54 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
 	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
-	CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
 	CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]),
-	CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
 	CLKDEV_DEV_ID("i2c-rcar_gen2.1", &mstp_clks[MSTP930]),
-	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
 	CLKDEV_DEV_ID("i2c-rcar_gen2.2", &mstp_clks[MSTP929]),
-	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
 	CLKDEV_DEV_ID("i2c-rcar_gen2.3", &mstp_clks[MSTP928]),
 	CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
-	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
+	CLKDEV_DEV_ID("r8a7790-vin.0", &mstp_clks[MSTP811]),
+	CLKDEV_DEV_ID("r8a7790-vin.1", &mstp_clks[MSTP810]),
+	CLKDEV_DEV_ID("r8a7790-vin.2", &mstp_clks[MSTP809]),
+	CLKDEV_DEV_ID("r8a7790-vin.3", &mstp_clks[MSTP808]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
-	CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]),
+	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP502]),
+	CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP501]),
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
-	CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]),
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
-	CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]),
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]),
-	CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]),
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
-	CLKDEV_DEV_ID("ee160000.sd", &mstp_clks[MSTP311]),
 	CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]),
-	CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
-	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
 	CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
 	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]),
+	CLKDEV_DEV_ID("pci-rcar-gen2.0", &mstp_clks[MSTP703]),
+	CLKDEV_DEV_ID("pci-rcar-gen2.1", &mstp_clks[MSTP703]),
+	CLKDEV_DEV_ID("pci-rcar-gen2.2", &mstp_clks[MSTP703]),
+	CLKDEV_DEV_ID("sata-r8a7790.0", &mstp_clks[MSTP815]),
+	CLKDEV_DEV_ID("sata-r8a7790.1", &mstp_clks[MSTP814]),
 
 	/* ICK */
+	CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.0", &mstp_clks[MSTP124]),
 	CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]),
 	CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]),
 	CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]),
 	CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
 	CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
 	CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
+	CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a),
+	CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
+	CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
+	CLKDEV_ICK_ID("clk_i", "rcar_sound", &m2_clk),
+	CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP1031]),
+	CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP1030]),
+	CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP1029]),
+	CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP1028]),
+	CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP1027]),
+	CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP1026]),
+	CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP1025]),
+	CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP1024]),
+	CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP1023]),
+	CLKDEV_ICK_ID("src.9", "rcar_sound", &mstp_clks[MSTP1022]),
 	CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP1015]),
 	CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP1014]),
 	CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP1013]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index f5461262ee25..e2fdfcc14436 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -25,6 +25,7 @@
 #include <linux/clkdev.h>
 #include <mach/clock.h>
 #include <mach/common.h>
+#include <mach/rcar-gen2.h>
 
 /*
  *   MD		EXTAL		PLL0	PLL1	PLL3
@@ -43,8 +44,6 @@
  *	see "p1 / 2" on R8A7791_CLOCK_ROOT() below
  */
 
-#define MD(nr)	(1 << nr)
-
 #define CPG_BASE 0xe6150000
 #define CPG_LEN 0x1000
 
@@ -59,10 +58,18 @@
 #define SMSTPCR10	0xE6150998
 #define SMSTPCR11	0xE615099C
 
-#define MODEMR		0xE6160060
+#define MSTPSR1		IOMEM(0xe6150038)
+#define MSTPSR2		IOMEM(0xe6150040)
+#define MSTPSR3		IOMEM(0xe6150048)
+#define MSTPSR5		IOMEM(0xe615003c)
+#define MSTPSR7		IOMEM(0xe61501c4)
+#define MSTPSR8		IOMEM(0xe61509a0)
+#define MSTPSR9		IOMEM(0xe61509a4)
+#define MSTPSR11	IOMEM(0xe61509ac)
+
 #define SDCKCR		0xE6150074
-#define SD2CKCR		0xE6150078
-#define SD3CKCR		0xE615007C
+#define SD1CKCR		0xE6150078
+#define SD2CKCR		0xE615026c
 #define MMC0CKCR	0xE6150240
 #define MMC1CKCR	0xE6150244
 #define SSPCKCR		0xE6150248
@@ -93,6 +100,7 @@ static struct clk main_clk = {
  */
 SH_FIXED_RATIO_CLK_SET(pll1_clk,		main_clk,	1, 1);
 SH_FIXED_RATIO_CLK_SET(pll3_clk,		main_clk,	1, 1);
+SH_FIXED_RATIO_CLK_SET(qspi_clk,		pll1_clk,	1, 1);
 
 /* fixed ratio clock */
 SH_FIXED_RATIO_CLK_SET(extal_div2_clk,		extal_clk,	1, 2);
@@ -103,7 +111,9 @@ SH_FIXED_RATIO_CLK_SET(hp_clk,			pll1_clk,	1, 12);
 SH_FIXED_RATIO_CLK_SET(p_clk,			pll1_clk,	1, 24);
 SH_FIXED_RATIO_CLK_SET(rclk_clk,		pll1_clk,	1, (48 * 1024));
 SH_FIXED_RATIO_CLK_SET(mp_clk,			pll1_div2_clk,	1, 15);
+SH_FIXED_RATIO_CLK_SET(zg_clk,			pll1_clk,	1, 3);
 SH_FIXED_RATIO_CLK_SET(zx_clk,			pll1_clk,	1, 3);
+SH_FIXED_RATIO_CLK_SET(zs_clk,			pll1_clk,	1, 6);
 
 static struct clk *main_clks[] = {
 	&extal_clk,
@@ -114,46 +124,103 @@ static struct clk *main_clks[] = {
 	&pll3_clk,
 	&hp_clk,
 	&p_clk,
+	&qspi_clk,
 	&rclk_clk,
 	&mp_clk,
 	&cp_clk,
+	&zg_clk,
 	&zx_clk,
+	&zs_clk,
+};
+
+/* SDHI (DIV4) clock */
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum {
+	DIV4_SDH, DIV4_SD0,
+	DIV4_NR
+};
+
+static struct clk div4_clks[DIV4_NR] = {
+	[DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
+	[DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
+};
+
+/* DIV6 clocks */
+enum {
+	DIV6_SD1, DIV6_SD2,
+	DIV6_NR
+};
+
+static struct clk div6_clks[DIV6_NR] = {
+	[DIV6_SD1]	= SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0),
+	[DIV6_SD2]	= SH_CLK_DIV6(&pll1_div2_clk, SD2CKCR, 0),
 };
 
 /* MSTP */
 enum {
+	MSTP1108, MSTP1107, MSTP1106,
+	MSTP931, MSTP930, MSTP929, MSTP928, MSTP927, MSTP925,
+	MSTP917,
+	MSTP815, MSTP814,
 	MSTP813,
+	MSTP811, MSTP810, MSTP809,
 	MSTP726, MSTP724, MSTP723, MSTP721, MSTP720,
 	MSTP719, MSTP718, MSTP715, MSTP714,
 	MSTP522,
+	MSTP314, MSTP312, MSTP311,
 	MSTP216, MSTP207, MSTP206,
-	MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107,
+	MSTP204, MSTP203, MSTP202,
 	MSTP124,
 	MSTP_NR
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
-	[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
-	[MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
-	[MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
-	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
-	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
-	[MSTP719] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 19, 0), /* SCIF2 */
-	[MSTP718] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 18, 0), /* SCIF3 */
-	[MSTP715] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 15, 0), /* SCIF4 */
-	[MSTP714] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 14, 0), /* SCIF5 */
-	[MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
-	[MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
-	[MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
-	[MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
-	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
-	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
-	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
-	[MSTP1105] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 5, 0), /* SCIFA3 */
-	[MSTP1106] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 6, 0), /* SCIFA4 */
-	[MSTP1107] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 7, 0), /* SCIFA5 */
-	[MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
+	[MSTP1108] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 8, MSTPSR11, 0), /* SCIFA5 */
+	[MSTP1107] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 7, MSTPSR11, 0), /* SCIFA4 */
+	[MSTP1106] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 6, MSTPSR11, 0), /* SCIFA3 */
+	[MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
+	[MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
+	[MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
+	[MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
+	[MSTP927] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */
+	[MSTP925] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */
+	[MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
+	[MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
+	[MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
+	[MSTP813] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR8, 13, MSTPSR8, 0), /* Ether */
+	[MSTP811] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 11, MSTPSR8, 0), /* VIN0 */
+	[MSTP810] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 10, MSTPSR8, 0), /* VIN1 */
+	[MSTP809] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 9, MSTPSR8, 0), /* VIN2 */
+	[MSTP726] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 26, MSTPSR7, 0), /* LVDS0 */
+	[MSTP724] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 24, MSTPSR7, 0), /* DU0 */
+	[MSTP723] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 23, MSTPSR7, 0), /* DU1 */
+	[MSTP721] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 21, MSTPSR7, 0), /* SCIF0 */
+	[MSTP720] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 20, MSTPSR7, 0), /* SCIF1 */
+	[MSTP719] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 19, MSTPSR7, 0), /* SCIF2 */
+	[MSTP718] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 18, MSTPSR7, 0), /* SCIF3 */
+	[MSTP715] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 15, MSTPSR7, 0), /* SCIF4 */
+	[MSTP714] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 14, MSTPSR7, 0), /* SCIF5 */
+	[MSTP522] = SH_CLK_MSTP32_STS(&extal_clk, SMSTPCR5, 22, MSTPSR5, 0), /* Thermal */
+	[MSTP314] = SH_CLK_MSTP32_STS(&div4_clks[DIV4_SD0], SMSTPCR3, 14, MSTPSR3, 0), /* SDHI0 */
+	[MSTP312] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD1], SMSTPCR3, 12, MSTPSR3, 0), /* SDHI1 */
+	[MSTP311] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD2], SMSTPCR3, 11, MSTPSR3, 0), /* SDHI2 */
+	[MSTP216] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 16, MSTPSR2, 0), /* SCIFB2 */
+	[MSTP207] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 7, MSTPSR2, 0), /* SCIFB1 */
+	[MSTP206] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 6, MSTPSR2, 0), /* SCIFB0 */
+	[MSTP204] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 4, MSTPSR2, 0), /* SCIFA0 */
+	[MSTP203] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 3, MSTPSR2, 0), /* SCIFA1 */
+	[MSTP202] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 2, MSTPSR2, 0), /* SCIFA2 */
+	[MSTP124] = SH_CLK_MSTP32_STS(&rclk_clk, SMSTPCR1, 24, MSTPSR1, 0), /* CMT0 */
 };
 
 static struct clk_lookup lookups[] = {
@@ -165,8 +232,11 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("pll1",		&pll1_clk),
 	CLKDEV_CON_ID("pll1_div2",	&pll1_div2_clk),
 	CLKDEV_CON_ID("pll3",		&pll3_clk),
+	CLKDEV_CON_ID("zg",		&zg_clk),
+	CLKDEV_CON_ID("zs",		&zs_clk),
 	CLKDEV_CON_ID("hp",		&hp_clk),
 	CLKDEV_CON_ID("p",		&p_clk),
+	CLKDEV_CON_ID("qspi",		&qspi_clk),
 	CLKDEV_CON_ID("rclk",		&rclk_clk),
 	CLKDEV_CON_ID("mp",		&mp_clk),
 	CLKDEV_CON_ID("cp",		&cp_clk),
@@ -188,13 +258,27 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */
 	CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */
 	CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */
-	CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */
-	CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
-	CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
-	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
-	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
+	CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1106]), /* SCIFA3 */
+	CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1107]), /* SCIFA4 */
+	CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1108]), /* SCIFA5 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
+	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP312]),
+	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]),
+	CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.0", &mstp_clks[MSTP124]),
+	CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+	CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]),
+	CLKDEV_DEV_ID("i2c-rcar_gen2.1", &mstp_clks[MSTP930]),
+	CLKDEV_DEV_ID("i2c-rcar_gen2.2", &mstp_clks[MSTP929]),
+	CLKDEV_DEV_ID("i2c-rcar_gen2.3", &mstp_clks[MSTP928]),
+	CLKDEV_DEV_ID("i2c-rcar_gen2.4", &mstp_clks[MSTP927]),
+	CLKDEV_DEV_ID("i2c-rcar_gen2.5", &mstp_clks[MSTP925]),
 	CLKDEV_DEV_ID("r8a7791-ether", &mstp_clks[MSTP813]), /* Ether */
+	CLKDEV_DEV_ID("r8a7791-vin.0", &mstp_clks[MSTP811]),
+	CLKDEV_DEV_ID("r8a7791-vin.1", &mstp_clks[MSTP810]),
+	CLKDEV_DEV_ID("r8a7791-vin.2", &mstp_clks[MSTP809]),
+	CLKDEV_DEV_ID("sata-r8a7791.0", &mstp_clks[MSTP815]),
+	CLKDEV_DEV_ID("sata-r8a7791.1", &mstp_clks[MSTP814]),
 };
 
 #define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
@@ -209,14 +293,9 @@ static struct clk_lookup lookups[] = {
 
 void __init r8a7791_clock_init(void)
 {
-	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
-	u32 mode;
+	u32 mode = rcar_gen2_read_mode_pins();
 	int k, ret = 0;
 
-	BUG_ON(!modemr);
-	mode = ioread32(modemr);
-	iounmap(modemr);
-
 	switch (mode & (MD(14) | MD(13))) {
 	case 0:
 		R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
@@ -232,10 +311,21 @@ void __init r8a7791_clock_init(void)
 		break;
 	}
 
+	if ((mode & (MD(3) | MD(2) | MD(1))) == MD(2))
+		SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 16);
+	else
+		SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 20);
+
 	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
 		ret = clk_register(main_clks[k]);
 
 	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+	if (!ret)
 		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 28489978b09c..d16d9ca7f79e 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -515,8 +515,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
 	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */
 	CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */
-	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
-	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
 	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX0 */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
@@ -565,10 +563,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */
 	CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */
 	CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */
-	CLKDEV_DEV_ID("sh_cmt.4", &mstp_clks[MSTP405]), /* CMT4 */
-	CLKDEV_DEV_ID("sh_cmt.3", &mstp_clks[MSTP404]), /* CMT3 */
 	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
-	CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */
 
 	/* ICK */
 	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
@@ -580,7 +575,11 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]),
 	CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]),
 	CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]),
+	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP125]), /* TMU0 */
 	CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]),
+	CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.4", &mstp_clks[MSTP405]), /* CMT4 */
+	CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.3", &mstp_clks[MSTP404]), /* CMT3 */
+	CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.2", &mstp_clks[MSTP400]), /* CMT2 */
 	CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]),
 	CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]),
 	CLKDEV_ICK_ID("xcka", "sh_fsi2", &fsiack_clk),
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 23edf8360c27..0d9cd1fe0212 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -633,8 +633,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */
 	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */
 	CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2-RX0 */
-	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
-	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
 	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
 	CLKDEV_DEV_ID("e6820000.i2c", &mstp_clks[MSTP116]), /* I2C0 */
@@ -650,7 +648,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
 	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
-	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
 	CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */
 	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
@@ -683,6 +680,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
 	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
 	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
+	CLKDEV_ICK_ID("fck", "sh-cmt-48.1", &mstp_clks[MSTP329]), /* CMT1 */
+	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP125]), /* TMU0 */
 };
 
 void __init sh73a0_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index ad7df629d995..e7232a0373b9 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -21,6 +21,32 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+
+#ifdef CONFIG_COMMON_CLK
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <mach/clock.h>
+
+void __init shmobile_clk_workaround(const struct clk_name *clks,
+				    int nr_clks, bool enable)
+{
+	const struct clk_name *clkn;
+	struct clk *clk;
+	unsigned int i;
+
+	for (i = 0; i < nr_clks; ++i) {
+		clkn = clks + i;
+		clk = clk_get(NULL, clkn->clk);
+		if (!IS_ERR(clk)) {
+			clk_register_clkdev(clk, clkn->con_id, clkn->dev_id);
+			if (enable)
+				clk_prepare_enable(clk);
+			clk_put(clk);
+		}
+	}
+}
+
+#else /* CONFIG_COMMON_CLK */
 #include <linux/sh_clk.h>
 #include <linux/export.h>
 #include <mach/clock.h>
@@ -58,3 +84,5 @@ void __clk_put(struct clk *clk)
 {
 }
 EXPORT_SYMBOL(__clk_put);
+
+#endif /* CONFIG_COMMON_CLK */
diff --git a/arch/arm/mach-shmobile/include/mach/clock.h b/arch/arm/mach-shmobile/include/mach/clock.h
index 03e56074928c..31b6417463e6 100644
--- a/arch/arm/mach-shmobile/include/mach/clock.h
+++ b/arch/arm/mach-shmobile/include/mach/clock.h
@@ -1,6 +1,22 @@
 #ifndef CLOCK_H
 #define CLOCK_H
 
+#ifdef CONFIG_COMMON_CLK
+/* temporary clock configuration helper for platform devices */
+
+struct clk_name {
+	const char *clk;
+	const char *con_id;
+	const char *dev_id;
+};
+
+void shmobile_clk_workaround(const struct clk_name *clks, int nr_clks,
+			     bool enable);
+
+#else /* CONFIG_COMMON_CLK */
+/* legacy clock implementation */
+
+struct clk;
 unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk);
 extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops;
 
@@ -36,4 +52,5 @@ do {			\
 	(p)->div = d;	\
 } while (0)
 
+#endif /* CONFIG_COMMON_CLK */
 #endif
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index e31980590eb4..f7a360edcc35 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -4,6 +4,7 @@
 extern void shmobile_earlytimer_init(void);
 extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 			 unsigned int mult, unsigned int div);
+extern void shmobile_init_delay(void);
 struct twd_local_timer;
 extern void shmobile_setup_console(void);
 extern void shmobile_boot_vector(void);
@@ -25,7 +26,6 @@ extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu,
 					    struct task_struct *idle);
 extern void shmobile_smp_apmu_cpu_die(unsigned int cpu);
 extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu);
-extern void shmobile_invalidate_start(void);
 struct clk;
 extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
deleted file mode 100644
index fcb142a14e07..000000000000
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_EMEV2_H__
-#define __ASM_EMEV2_H__
-
-extern void emev2_map_io(void);
-extern void emev2_init_delay(void);
-extern void emev2_clock_init(void);
-extern struct smp_operations emev2_smp_ops;
-
-#endif /* __ASM_EMEV2_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt b/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
new file mode 100644
index 000000000000..9531f46a822a
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
@@ -0,0 +1,410 @@
+LIST "KZM9G low-level initialization routine."
+LIST "Adapted from u-boot KZM9G support code."
+
+LIST "Copyright (C) 2013 Ulrich Hecht"
+
+LIST "This program is free software; you can redistribute it and/or modify"
+LIST "it under the terms of the GNU General Public License version 2 as"
+LIST "published by the Free Software Foundation."
+
+LIST "This program is distributed in the hope that it will be useful,"
+LIST "but WITHOUT ANY WARRANTY; without even the implied warranty of"
+LIST "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the"
+LIST "GNU General Public License for more details."
+
+
+LIST "Register definitions:"
+
+LIST "Secure control register"
+#define LIFEC_SEC_SRC (0xE6110008)
+
+LIST "RWDT"
+#define RWDT_BASE   (0xE6020000)
+#define RWTCSRA0 (RWDT_BASE + 0x04)
+
+LIST "HPB Semaphore Control Registers"
+#define HPBSCR_BASE (0xE6000000)
+#define HPBCTRL6 (HPBSCR_BASE + 0x1030)
+
+#define SBSC1_BASE  (0xFE400000)
+#define SDCR0A		(SBSC1_BASE + 0x0008)
+#define SDCR1A		(SBSC1_BASE + 0x000C)
+#define SDPCRA		(SBSC1_BASE + 0x0010)
+#define SDCR0SA		(SBSC1_BASE + 0x0018)
+#define SDCR1SA		(SBSC1_BASE + 0x001C)
+#define RTCSRA		(SBSC1_BASE + 0x0020)
+#define RTCORA		(SBSC1_BASE + 0x0028)
+#define RTCORHA		(SBSC1_BASE + 0x002C)
+#define SDWCRC0A	(SBSC1_BASE + 0x0040)
+#define SDWCRC1A	(SBSC1_BASE + 0x0044)
+#define SDWCR00A	(SBSC1_BASE + 0x0048)
+#define SDWCR01A	(SBSC1_BASE + 0x004C)
+#define SDWCR10A	(SBSC1_BASE + 0x0050)
+#define SDWCR11A	(SBSC1_BASE + 0x0054)
+#define SDWCR2A		(SBSC1_BASE + 0x0060)
+#define SDWCRC2A	(SBSC1_BASE + 0x0064)
+#define ZQCCRA		(SBSC1_BASE + 0x0068)
+#define SDMRACR0A	(SBSC1_BASE + 0x0084)
+#define SDMRTMPCRA	(SBSC1_BASE + 0x008C)
+#define SDMRTMPMSKA	(SBSC1_BASE + 0x0094)
+#define SDGENCNTA	(SBSC1_BASE + 0x009C)
+#define SDDRVCR0A	(SBSC1_BASE + 0x00B4)
+#define DLLCNT0A	(SBSC1_BASE + 0x0354)
+
+#define SDMRA1  (0xFE500000)
+#define SDMRA2  (0xFE5C0000)
+#define SDMRA3  (0xFE504000)
+
+#define SBSC2_BASE  (0xFB400000)
+#define SDCR0B		(SBSC2_BASE + 0x0008)
+#define SDCR1B		(SBSC2_BASE + 0x000C)
+#define SDPCRB		(SBSC2_BASE + 0x0010)
+#define SDCR0SB		(SBSC2_BASE + 0x0018)
+#define SDCR1SB		(SBSC2_BASE + 0x001C)
+#define RTCSRB		(SBSC2_BASE + 0x0020)
+#define RTCORB		(SBSC2_BASE + 0x0028)
+#define RTCORHB		(SBSC2_BASE + 0x002C)
+#define SDWCRC0B	(SBSC2_BASE + 0x0040)
+#define SDWCRC1B	(SBSC2_BASE + 0x0044)
+#define SDWCR00B	(SBSC2_BASE + 0x0048)
+#define SDWCR01B	(SBSC2_BASE + 0x004C)
+#define SDWCR10B	(SBSC2_BASE + 0x0050)
+#define SDWCR11B	(SBSC2_BASE + 0x0054)
+#define SDPDCR0B	(SBSC2_BASE + 0x0058)
+#define SDWCR2B		(SBSC2_BASE + 0x0060)
+#define SDWCRC2B	(SBSC2_BASE + 0x0064)
+#define ZQCCRB		(SBSC2_BASE + 0x0068)
+#define SDMRACR0B	(SBSC2_BASE + 0x0084)
+#define SDMRTMPCRB	(SBSC2_BASE + 0x008C)
+#define SDMRTMPMSKB	(SBSC2_BASE + 0x0094)
+#define SDGENCNTB	(SBSC2_BASE + 0x009C)
+#define DPHYCNT0B	(SBSC2_BASE + 0x00A0)
+#define DPHYCNT1B	(SBSC2_BASE + 0x00A4)
+#define DPHYCNT2B	(SBSC2_BASE + 0x00A8)
+#define SDDRVCR0B	(SBSC2_BASE + 0x00B4)
+#define DLLCNT0B	(SBSC2_BASE + 0x0354)
+
+#define SDMRB1  (0xFB500000)
+#define SDMRB2  (0xFB5C0000)
+#define SDMRB3  (0xFB504000)
+
+#define CPG_BASE   (0xE6150000)
+#define FRQCRA		(CPG_BASE + 0x0000)
+#define FRQCRB		(CPG_BASE + 0x0004)
+#define FRQCRD		(CPG_BASE + 0x00E4)
+#define VCLKCR1		(CPG_BASE + 0x0008)
+#define VCLKCR2		(CPG_BASE + 0x000C)
+#define VCLKCR3		(CPG_BASE + 0x001C)
+#define ZBCKCR		(CPG_BASE + 0x0010)
+#define FLCKCR		(CPG_BASE + 0x0014)
+#define SD0CKCR		(CPG_BASE + 0x0074)
+#define SD1CKCR		(CPG_BASE + 0x0078)
+#define SD2CKCR		(CPG_BASE + 0x007C)
+#define FSIACKCR	(CPG_BASE + 0x0018)
+#define SUBCKCR		(CPG_BASE + 0x0080)
+#define SPUACKCR	(CPG_BASE + 0x0084)
+#define SPUVCKCR	(CPG_BASE + 0x0094)
+#define MSUCKCR		(CPG_BASE + 0x0088)
+#define HSICKCR		(CPG_BASE + 0x008C)
+#define FSIBCKCR	(CPG_BASE + 0x0090)
+#define MFCK1CR		(CPG_BASE + 0x0098)
+#define MFCK2CR		(CPG_BASE + 0x009C)
+#define DSITCKCR	(CPG_BASE + 0x0060)
+#define DSI0PCKCR	(CPG_BASE + 0x0064)
+#define DSI1PCKCR	(CPG_BASE + 0x0068)
+#define DSI0PHYCR	(CPG_BASE + 0x006C)
+#define DVFSCR3		(CPG_BASE + 0x0174)
+#define DVFSCR4		(CPG_BASE + 0x0178)
+#define DVFSCR5		(CPG_BASE + 0x017C)
+#define MPMODE		(CPG_BASE + 0x00CC)
+
+#define PLLECR		(CPG_BASE + 0x00D0)
+#define PLL0CR		(CPG_BASE + 0x00D8)
+#define PLL1CR		(CPG_BASE + 0x0028)
+#define PLL2CR		(CPG_BASE + 0x002C)
+#define PLL3CR		(CPG_BASE + 0x00DC)
+#define PLL0STPCR	(CPG_BASE + 0x00F0)
+#define PLL1STPCR	(CPG_BASE + 0x00C8)
+#define PLL2STPCR	(CPG_BASE + 0x00F8)
+#define PLL3STPCR	(CPG_BASE + 0x00FC)
+#define RMSTPCR0	(CPG_BASE + 0x0110)
+#define RMSTPCR1	(CPG_BASE + 0x0114)
+#define RMSTPCR2	(CPG_BASE + 0x0118)
+#define RMSTPCR3	(CPG_BASE + 0x011C)
+#define RMSTPCR4	(CPG_BASE + 0x0120)
+#define RMSTPCR5	(CPG_BASE + 0x0124)
+#define SMSTPCR0	(CPG_BASE + 0x0130)
+#define SMSTPCR2	(CPG_BASE + 0x0138)
+#define SMSTPCR3	(CPG_BASE + 0x013C)
+#define CPGXXCR4	(CPG_BASE + 0x0150)
+#define SRCR0		(CPG_BASE + 0x80A0)
+#define SRCR2		(CPG_BASE + 0x80B0)
+#define SRCR3		(CPG_BASE + 0x80A8)
+#define VREFCR		(CPG_BASE + 0x00EC)
+#define PCLKCR		(CPG_BASE + 0x1020)
+
+#define PORT32CR (0xE6051020)
+#define PORT33CR (0xE6051021)
+#define PORT34CR (0xE6051022)
+#define PORT35CR (0xE6051023)
+
+LIST "DRAM initialization code:"
+
+EW RWTCSRA0, 0xA507
+
+ED_AND LIFEC_SEC_SRC, 0xFFFF7FFF
+
+ED_AND SMSTPCR3,0xFFFF7FFF
+ED_AND SRCR3, 0xFFFF7FFF
+ED_AND SMSTPCR2,0xFFFBFFFF
+ED_AND SRCR2, 0xFFFBFFFF
+ED PLLECR, 0x00000000
+
+WAIT_MASK PLLECR, 0x00000F00, 0x00000000
+WAIT_MASK FRQCRB, 0x80000000, 0x00000000
+
+ED PLL0CR, 0x2D000000
+ED PLL1CR, 0x17100000
+ED FRQCRB, 0x96235880
+WAIT_MASK FRQCRB, 0x80000000, 0x00000000
+
+ED FLCKCR, 0x0000000B
+ED_AND SMSTPCR0, 0xFFFFFFFD
+
+ED_AND SRCR0, 0xFFFFFFFD
+ED 0xE6001628, 0x514
+ED 0xE6001648, 0x514
+ED 0xE6001658, 0x514
+ED 0xE6001678, 0x514
+
+ED DVFSCR4, 0x00092000
+ED DVFSCR5, 0x000000DC
+ED PLLECR, 0x00000000
+WAIT_MASK PLLECR, 0x00000F00, 0x00000000
+
+ED FRQCRA, 0x0012453C
+ED FRQCRB, 0x80431350
+WAIT_MASK FRQCRB, 0x80000000, 0x00000000
+ED FRQCRD, 0x00000B0B
+WAIT_MASK FRQCRD, 0x80000000, 0x00000000
+
+ED PCLKCR, 0x00000003
+ED VCLKCR1, 0x0000012F
+ED VCLKCR2, 0x00000119
+ED VCLKCR3, 0x00000119
+ED ZBCKCR, 0x00000002
+ED FLCKCR, 0x00000005
+ED SD0CKCR, 0x00000080
+ED SD1CKCR, 0x00000080
+ED SD2CKCR, 0x00000080
+ED FSIACKCR, 0x0000003F
+ED FSIBCKCR, 0x0000003F
+ED SUBCKCR, 0x00000080
+ED SPUACKCR, 0x0000000B
+ED SPUVCKCR, 0x0000000B
+ED MSUCKCR, 0x0000013F
+ED HSICKCR, 0x00000080
+ED MFCK1CR, 0x0000003F
+ED MFCK2CR, 0x0000003F
+ED DSITCKCR, 0x00000107
+ED DSI0PCKCR, 0x00000313
+ED DSI1PCKCR, 0x0000130D
+ED DSI0PHYCR, 0x2A800E0E
+ED PLL0CR, 0x1E000000
+ED PLL0CR, 0x2D000000
+ED PLL1CR, 0x17100000
+ED PLL2CR, 0x27000080
+ED PLL3CR, 0x1D000000
+ED PLL0STPCR, 0x00080000
+ED PLL1STPCR, 0x000120C0
+ED PLL2STPCR, 0x00012000
+ED PLL3STPCR, 0x00000030
+ED PLLECR, 0x0000000B
+WAIT_MASK PLLECR, 0x00000B00, 0x00000B00
+
+ED DVFSCR3, 0x000120F0
+ED MPMODE, 0x00000020
+ED VREFCR, 0x0000028A
+ED RMSTPCR0, 0xE4628087
+ED RMSTPCR1, 0xFFFFFFFF
+ED RMSTPCR2, 0x53FFFFFF
+ED RMSTPCR3, 0xFFFFFFFF
+ED RMSTPCR4, 0x00800D3D
+ED RMSTPCR5, 0xFFFFF3FF
+ED SMSTPCR2, 0x00000000
+ED SRCR2,  0x00040000
+ED_AND PLLECR, 0xFFFFFFF7
+WAIT_MASK PLLECR, 0x00000800, 0x00000000
+
+LIST "set SBSC operational"
+ED HPBCTRL6, 0x00000001
+WAIT_MASK HPBCTRL6, 0x00000001, 0x00000001
+
+LIST "set SBSC operating frequency"
+ED FRQCRD, 0x00001414
+WAIT_MASK FRQCRD, 0x80000000, 0x00000000
+ED PLL3CR, 0x1D000000
+ED_OR PLLECR, 0x00000008
+WAIT_MASK PLLECR, 0x00000800, 0x00000800
+
+LIST "enable DLL oscillation in DDRPHY"
+ED_OR DLLCNT0A, 0x00000002
+
+LIST "wait >= 100 ns"
+ED SDGENCNTA, 0x00000005
+WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
+
+LIST "target LPDDR2 device settings"
+ED SDCR0A, 0xACC90159
+ED SDCR1A, 0x00010059
+ED SDWCRC0A, 0x50874114
+ED SDWCRC1A, 0x33199B37
+ED SDWCRC2A, 0x008F2313
+ED SDWCR00A, 0x31020707
+ED SDWCR01A, 0x0017040A
+ED SDWCR10A, 0x31020707
+ED SDWCR11A, 0x0017040A
+
+ED SDDRVCR0A, 0x055557ff
+
+ED SDWCR2A, 0x30000000
+
+LIST "drive CKE high"
+ED_OR SDPCRA, 0x00000080
+WAIT_MASK SDPCRA, 0x00000080, 0x00000080
+
+LIST "wait >= 200 us"
+ED SDGENCNTA, 0x00002710
+WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
+
+LIST "issue reset command to LPDDR2 device"
+ED SDMRACR0A, 0x0000003F
+ED SDMRA1, 0x00000000
+
+LIST "wait >= 10 (or 1) us (docs inconsistent)"
+ED SDGENCNTA, 0x000001F4
+WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
+
+LIST "MRW ZS initialization calibration command"
+ED SDMRACR0A, 0x0000FF0A
+ED SDMRA3, 0x00000000
+
+LIST "wait >= 1 us"
+ED SDGENCNTA, 0x00000032
+WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
+
+LIST "specify operating mode in LPDDR2"
+ED SDMRACR0A, 0x00002201
+ED SDMRA1, 0x00000000
+ED SDMRACR0A, 0x00000402
+ED SDMRA1, 0x00000000
+ED SDMRACR0A, 0x00000203
+ED SDMRA1, 0x00000000
+
+LIST "initialize DDR interface"
+ED SDMRA2, 0x00000000
+
+LIST "temperature sensor control"
+ED SDMRTMPCRA, 0x88800004
+ED SDMRTMPMSKA,0x00000004
+
+LIST "auto-refreshing control"
+ED RTCORA, 0xA55A0032
+ED RTCORHA, 0xA55A000C
+ED RTCSRA, 0xA55A2048
+
+ED_OR SDCR0A, 0x00000800
+ED_OR SDCR1A, 0x00000400
+
+LIST "auto ZQ calibration control"
+ED ZQCCRA, 0xFFF20000
+
+ED_OR DLLCNT0B, 0x00000002
+ED SDGENCNTB, 0x00000005
+WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
+
+ED SDCR0B, 0xACC90159
+ED SDCR1B, 0x00010059
+ED SDWCRC0B, 0x50874114
+ED SDWCRC1B, 0x33199B37
+ED SDWCRC2B, 0x008F2313
+ED SDWCR00B, 0x31020707
+ED SDWCR01B, 0x0017040A
+ED SDWCR10B, 0x31020707
+ED SDWCR11B, 0x0017040A
+ED SDDRVCR0B, 0x055557ff
+ED SDWCR2B, 0x30000000
+ED_OR SDPCRB, 0x00000080
+WAIT_MASK SDPCRB, 0x00000080, 0x00000080
+
+ED SDGENCNTB, 0x00002710
+WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
+ED SDMRACR0B, 0x0000003F
+
+LIST "upstream u-boot writes to SDMRA1A for both SBSC 1 and 2, which does"
+LIST "not seem to make a lot of sense..."
+ED SDMRB1, 0x00000000
+
+ED SDGENCNTB, 0x000001F4
+WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
+
+ED SDMRACR0B, 0x0000FF0A
+ED SDMRB3, 0x00000000
+ED SDGENCNTB, 0x00000032
+WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
+
+ED SDMRACR0B, 0x00002201
+ED SDMRB1, 0x00000000
+ED SDMRACR0B, 0x00000402
+ED SDMRB1, 0x00000000
+ED SDMRACR0B, 0x00000203
+ED SDMRB1, 0x00000000
+ED SDMRB2, 0x00000000
+ED SDMRTMPCRB, 0x88800004
+ED SDMRTMPMSKB, 0x00000004
+ED RTCORB,  0xA55A0032
+ED RTCORHB, 0xA55A000C
+ED RTCSRB,  0xA55A2048
+ED_OR SDCR0B, 0x00000800
+ED_OR SDCR1B, 0x00000400
+ED ZQCCRB, 0xFFF20000
+ED_OR SDPDCR0B, 0x00030000
+ED DPHYCNT1B, 0xA5390000
+ED DPHYCNT0B, 0x00001200
+ED DPHYCNT1B, 0x07CE0000
+ED DPHYCNT0B, 0x00001247
+WAIT_MASK DPHYCNT2B, 0xFFFFFFFF, 0x07CE0000
+
+ED_AND SDPDCR0B, 0xFFFCFFFF
+
+ED FRQCRD, 0x00000B0B
+WAIT_MASK FRQCRD, 0x80000000, 0x00000000
+
+ED CPGXXCR4, 0xfffffffc
+
+LIST "Setup SCIF4 / workaround"
+EB PORT32CR, 0x12
+EB PORT33CR, 0x22
+EB PORT34CR, 0x12
+EB PORT35CR, 0x22
+
+EW 0xE6C80000, 0
+EB 0xE6C80004, 0x19
+EW 0xE6C80008, 0x0030
+EW 0xE6C80018, 0
+EW 0xE6C80030, 0x0014
+
+LIST "Magic to avoid hangs and corruption on DRAM writes."
+
+LIST "It has been observed that the system would most often hang while"
+LIST "decompressing the kernel, and if it didn't it would always write"
+LIST "a corrupt image to DRAM."
+LIST "This problem does not occur in u-boot, and the reason is that"
+LIST "u-boot performs an additional cache invalidation after setting up"
+LIST "the DRAM controller. Such an invalidation should not be necessary at"
+LIST "this point, and attempts at removing parts of the routine to arrive"
+LIST "at the minimal snippet of code necessary to avoid the DRAM stability"
+LIST "problem yielded the following:"
+
+MRC p15, 0, r0, c1, c0, 0
+MCR p15, 0, r0, c1, c0, 0
diff --git a/arch/arm/mach-shmobile/include/mach/pm-rcar.h b/arch/arm/mach-shmobile/include/mach/pm-rcar.h
new file mode 100644
index 000000000000..ef3a1ef628f1
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/pm-rcar.h
@@ -0,0 +1,15 @@
+#ifndef PM_RCAR_H
+#define PM_RCAR_H
+
+struct rcar_sysc_ch {
+	unsigned long chan_offs;
+	unsigned int chan_bit;
+	unsigned int isr_bit;
+};
+
+int rcar_sysc_power_down(struct rcar_sysc_ch *sysc_ch);
+int rcar_sysc_power_up(struct rcar_sysc_ch *sysc_ch);
+bool rcar_sysc_power_is_off(struct rcar_sysc_ch *sysc_ch);
+void __iomem *rcar_sysc_init(phys_addr_t base);
+
+#endif /* PM_RCAR_H */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
index d07932f872b6..5e3c9ec06303 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -47,7 +47,6 @@ enum {
 };
 
 extern void r8a7740_meram_workaround(void);
-extern void r8a7740_init_delay(void);
 extern void r8a7740_init_irq_of(void);
 extern void r8a7740_map_io(void);
 extern void r8a7740_add_early_devices(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index b40e13631f6a..88eeceaf1088 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -3,6 +3,7 @@
 
 #include <linux/sh_clk.h>
 #include <linux/pm_domain.h>
+#include <mach/pm-rcar.h>
 
 /* HPB-DMA slave IDs */
 enum {
@@ -11,18 +12,12 @@ enum {
 	HPBDMA_SLAVE_SDHI0_RX,
 };
 
-struct r8a7779_pm_ch {
-	unsigned long chan_offs;
-	unsigned int chan_bit;
-	unsigned int isr_bit;
-};
-
 struct r8a7779_pm_domain {
 	struct generic_pm_domain genpd;
-	struct r8a7779_pm_ch ch;
+	struct rcar_sysc_ch ch;
 };
 
-static inline struct r8a7779_pm_ch *to_r8a7779_ch(struct generic_pm_domain *d)
+static inline struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d)
 {
 	return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
 }
@@ -41,8 +36,6 @@ extern void r8a7779_clock_init(void);
 extern void r8a7779_pinmux_init(void);
 extern void r8a7779_pm_init(void);
 extern void r8a7779_register_twd(void);
-extern int r8a7779_sysc_power_down(struct r8a7779_pm_ch *r8a7779_ch);
-extern int r8a7779_sysc_power_up(struct r8a7779_pm_ch *r8a7779_ch);
 
 #ifdef CONFIG_PM
 extern void __init r8a7779_init_pm_domains(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index 5fbfa28b40b6..0b95babe84ba 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -3,10 +3,36 @@
 
 #include <mach/rcar-gen2.h>
 
+/* DMA slave IDs */
+enum {
+	RCAR_DMA_SLAVE_INVALID,
+	AUDIO_DMAC_SLAVE_SSI0_TX,
+	AUDIO_DMAC_SLAVE_SSI0_RX,
+	AUDIO_DMAC_SLAVE_SSI1_TX,
+	AUDIO_DMAC_SLAVE_SSI1_RX,
+	AUDIO_DMAC_SLAVE_SSI2_TX,
+	AUDIO_DMAC_SLAVE_SSI2_RX,
+	AUDIO_DMAC_SLAVE_SSI3_TX,
+	AUDIO_DMAC_SLAVE_SSI3_RX,
+	AUDIO_DMAC_SLAVE_SSI4_TX,
+	AUDIO_DMAC_SLAVE_SSI4_RX,
+	AUDIO_DMAC_SLAVE_SSI5_TX,
+	AUDIO_DMAC_SLAVE_SSI5_RX,
+	AUDIO_DMAC_SLAVE_SSI6_TX,
+	AUDIO_DMAC_SLAVE_SSI6_RX,
+	AUDIO_DMAC_SLAVE_SSI7_TX,
+	AUDIO_DMAC_SLAVE_SSI7_RX,
+	AUDIO_DMAC_SLAVE_SSI8_TX,
+	AUDIO_DMAC_SLAVE_SSI8_RX,
+	AUDIO_DMAC_SLAVE_SSI9_TX,
+	AUDIO_DMAC_SLAVE_SSI9_RX,
+};
+
 void r8a7790_add_standard_devices(void);
 void r8a7790_add_dt_devices(void);
 void r8a7790_clock_init(void);
 void r8a7790_pinmux_init(void);
+void r8a7790_pm_init(void);
 void r8a7790_init_early(void);
 extern struct smp_operations r8a7790_smp_ops;
 
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h
index 200fa699f730..664274cc4b64 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7791.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h
@@ -5,7 +5,6 @@ void r8a7791_add_standard_devices(void);
 void r8a7791_add_dt_devices(void);
 void r8a7791_clock_init(void);
 void r8a7791_pinmux_init(void);
-void r8a7791_init_early(void);
 extern struct smp_operations r8a7791_smp_ops;
 
 #endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/timex.h b/arch/arm/mach-shmobile/include/mach/timex.h
deleted file mode 100644
index ae0d8d825c23..000000000000
--- a/arch/arm/mach-shmobile/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_MACH_TIMEX_H
-#define __ASM_MACH_TIMEX_H
-
-#define CLOCK_TICK_RATE		1193180 /* unused i8253 PIT value */
-
-#endif /* __ASM_MACH_TIMEX_H */
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
index c3c4669a2d72..727cc78ac8ec 100644
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ b/arch/arm/mach-shmobile/include/mach/zboot.h
@@ -12,6 +12,9 @@
 #ifdef CONFIG_MACH_MACKEREL
 #define MEMORY_START	0x40000000
 #include "mach/head-mackerel.txt"
+#elif defined(CONFIG_MACH_KZM9G) || defined(CONFIG_MACH_KZM9G_REFERENCE)
+#define MEMORY_START	0x43000000
+#include "mach/head-kzm9g.txt"
 #else
 #error "unsupported board."
 #endif
diff --git a/arch/arm/mach-shmobile/include/mach/zboot_macros.h b/arch/arm/mach-shmobile/include/mach/zboot_macros.h
index aa6111fbc989..14fd3d538e9a 100644
--- a/arch/arm/mach-shmobile/include/mach/zboot_macros.h
+++ b/arch/arm/mach-shmobile/include/mach/zboot_macros.h
@@ -62,4 +62,47 @@
 2 :
 .endm
 
+/* loop until a given value has been read (with mask) */
+.macro WAIT_MASK, addr, data, cmp
+	LDR	r0, 2f
+	LDR	r1, 3f
+	LDR	r2, 4f
+1:
+	LDR	r3, [r0, #0]
+	AND	r3, r1, r3
+	CMP	r2, r3
+	BNE	1b
+	B	5f
+2:	.long	\addr
+3:	.long	\data
+4:	.long	\cmp
+5:
+.endm
+
+/* read 32-bit value from addr, "or" an immediate and write back */
+.macro ED_OR, addr, data
+	LDR r4, 1f
+	LDR r5, 2f
+	LDR r6, [r4]
+	ORR r5, r6, r5
+	STR r5, [r4]
+	B	3f
+1:	.long	\addr
+2:	.long	\data
+3:
+.endm
+
+/* read 32-bit value from addr, "and" an immediate and write back */
+.macro ED_AND, addr, data
+	LDR r4, 1f
+	LDR r5, 2f
+	LDR r6, [r4]
+	AND r5, r6, r5
+	STR r5, [r4]
+	B	3f
+1:	.long \addr
+2:	.long \data
+3:
+.endm
+
 #endif /* __ZBOOT_MACRO_H */
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 1da5a72d9642..8cb641c00fdb 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -75,8 +75,7 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit)
 	apmu_cpus[cpu].iomem = ioremap_nocache(res->start, resource_size(res));
 	apmu_cpus[cpu].bit = bit;
 
-	pr_debug("apmu ioremap %d %d 0x%08x 0x%08x\n", cpu, bit,
-		 res->start, resource_size(res));
+	pr_debug("apmu ioremap %d %d %pr\n", cpu, bit, res);
 }
 
 static struct {
diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index d50a8e9b94a4..d6fe189b2df6 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -20,132 +20,22 @@
 #include <linux/console.h>
 #include <asm/io.h>
 #include <mach/common.h>
+#include <mach/pm-rcar.h>
 #include <mach/r8a7779.h>
 
-static void __iomem *r8a7779_sysc_base;
-
 /* SYSC */
-#define SYSCSR 0x00
-#define SYSCISR 0x04
-#define SYSCISCR 0x08
 #define SYSCIER 0x0c
 #define SYSCIMR 0x10
-#define PWRSR0 0x40
-#define PWRSR1 0x80
-#define PWRSR2 0xc0
-#define PWRSR3 0x100
-#define PWRSR4 0x140
-
-#define PWRSR_OFFS 0x00
-#define PWROFFCR_OFFS 0x04
-#define PWRONCR_OFFS 0x0c
-#define PWRER_OFFS 0x14
-
-#define SYSCSR_RETRIES 100
-#define SYSCSR_DELAY_US 1
-
-#define SYSCISR_RETRIES 1000
-#define SYSCISR_DELAY_US 1
 
 #if defined(CONFIG_PM) || defined(CONFIG_SMP)
 
-static DEFINE_SPINLOCK(r8a7779_sysc_lock); /* SMP CPUs + I/O devices */
-
-static int r8a7779_sysc_pwr_on_off(struct r8a7779_pm_ch *r8a7779_ch,
-				   int sr_bit, int reg_offs)
-{
-	int k;
-
-	for (k = 0; k < SYSCSR_RETRIES; k++) {
-		if (ioread32(r8a7779_sysc_base + SYSCSR) & (1 << sr_bit))
-			break;
-		udelay(SYSCSR_DELAY_US);
-	}
-
-	if (k == SYSCSR_RETRIES)
-		return -EAGAIN;
-
-	iowrite32(1 << r8a7779_ch->chan_bit,
-		  r8a7779_sysc_base + r8a7779_ch->chan_offs + reg_offs);
-
-	return 0;
-}
-
-static int r8a7779_sysc_pwr_off(struct r8a7779_pm_ch *r8a7779_ch)
-{
-	return r8a7779_sysc_pwr_on_off(r8a7779_ch, 0, PWROFFCR_OFFS);
-}
-
-static int r8a7779_sysc_pwr_on(struct r8a7779_pm_ch *r8a7779_ch)
-{
-	return r8a7779_sysc_pwr_on_off(r8a7779_ch, 1, PWRONCR_OFFS);
-}
-
-static int r8a7779_sysc_update(struct r8a7779_pm_ch *r8a7779_ch,
-			       int (*on_off_fn)(struct r8a7779_pm_ch *))
-{
-	unsigned int isr_mask = 1 << r8a7779_ch->isr_bit;
-	unsigned int chan_mask = 1 << r8a7779_ch->chan_bit;
-	unsigned int status;
-	unsigned long flags;
-	int ret = 0;
-	int k;
-
-	spin_lock_irqsave(&r8a7779_sysc_lock, flags);
-
-	iowrite32(isr_mask, r8a7779_sysc_base + SYSCISCR);
-
-	do {
-		ret = on_off_fn(r8a7779_ch);
-		if (ret)
-			goto out;
-
-		status = ioread32(r8a7779_sysc_base +
-				  r8a7779_ch->chan_offs + PWRER_OFFS);
-	} while (status & chan_mask);
-
-	for (k = 0; k < SYSCISR_RETRIES; k++) {
-		if (ioread32(r8a7779_sysc_base + SYSCISR) & isr_mask)
-			break;
-		udelay(SYSCISR_DELAY_US);
-	}
-
-	if (k == SYSCISR_RETRIES)
-		ret = -EIO;
-
-	iowrite32(isr_mask, r8a7779_sysc_base + SYSCISCR);
-
- out:
-	spin_unlock_irqrestore(&r8a7779_sysc_lock, flags);
-
-	pr_debug("r8a7779 power domain %d: %02x %02x %02x %02x %02x -> %d\n",
-		 r8a7779_ch->isr_bit, ioread32(r8a7779_sysc_base + PWRSR0),
-		 ioread32(r8a7779_sysc_base + PWRSR1),
-		 ioread32(r8a7779_sysc_base + PWRSR2),
-		 ioread32(r8a7779_sysc_base + PWRSR3),
-		 ioread32(r8a7779_sysc_base + PWRSR4), ret);
-	return ret;
-}
-
-int r8a7779_sysc_power_down(struct r8a7779_pm_ch *r8a7779_ch)
-{
-	return r8a7779_sysc_update(r8a7779_ch, r8a7779_sysc_pwr_off);
-}
-
-int r8a7779_sysc_power_up(struct r8a7779_pm_ch *r8a7779_ch)
-{
-	return r8a7779_sysc_update(r8a7779_ch, r8a7779_sysc_pwr_on);
-}
-
 static void __init r8a7779_sysc_init(void)
 {
-	r8a7779_sysc_base = ioremap_nocache(0xffd85000, PAGE_SIZE);
-	if (!r8a7779_sysc_base)
-		panic("unable to ioremap r8a7779 SYSC hardware block\n");
+	void __iomem *base = rcar_sysc_init(0xffd85000);
 
 	/* enable all interrupt sources, but do not use interrupt handler */
-	iowrite32(0x0131000e, r8a7779_sysc_base + SYSCIER);
-	iowrite32(0, r8a7779_sysc_base + SYSCIMR);
+	iowrite32(0x0131000e, base + SYSCIER);
+	iowrite32(0, base + SYSCIMR);
 }
 
 #else /* CONFIG_PM || CONFIG_SMP */
@@ -158,24 +48,17 @@ static inline void r8a7779_sysc_init(void) {}
 
 static int pd_power_down(struct generic_pm_domain *genpd)
 {
-	return r8a7779_sysc_power_down(to_r8a7779_ch(genpd));
+	return rcar_sysc_power_down(to_r8a7779_ch(genpd));
 }
 
 static int pd_power_up(struct generic_pm_domain *genpd)
 {
-	return r8a7779_sysc_power_up(to_r8a7779_ch(genpd));
+	return rcar_sysc_power_up(to_r8a7779_ch(genpd));
 }
 
 static bool pd_is_off(struct generic_pm_domain *genpd)
 {
-	struct r8a7779_pm_ch *r8a7779_ch = to_r8a7779_ch(genpd);
-	unsigned int st;
-
-	st = ioread32(r8a7779_sysc_base + r8a7779_ch->chan_offs + PWRSR_OFFS);
-	if (st & (1 << r8a7779_ch->chan_bit))
-		return true;
-
-	return false;
+	return rcar_sysc_power_is_off(to_r8a7779_ch(genpd));
 }
 
 static bool pd_active_wakeup(struct device *dev)
diff --git a/arch/arm/mach-shmobile/pm-r8a7790.c b/arch/arm/mach-shmobile/pm-r8a7790.c
new file mode 100644
index 000000000000..fc82839e2c2a
--- /dev/null
+++ b/arch/arm/mach-shmobile/pm-r8a7790.c
@@ -0,0 +1,45 @@
+/*
+ * r8a7790 Power management support
+ *
+ * Copyright (C) 2013  Renesas Electronics Corporation
+ * Copyright (C) 2011  Renesas Solutions Corp.
+ * Copyright (C) 2011  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <mach/pm-rcar.h>
+#include <mach/r8a7790.h>
+
+/* SYSC */
+#define SYSCIER 0x0c
+#define SYSCIMR 0x10
+
+#if defined(CONFIG_SMP)
+
+static void __init r8a7790_sysc_init(void)
+{
+	void __iomem *base = rcar_sysc_init(0xe6180000);
+
+	/* enable all interrupt sources, but do not use interrupt handler */
+	iowrite32(0x0131000e, base + SYSCIER);
+	iowrite32(0, base + SYSCIMR);
+}
+
+#else /* CONFIG_SMP */
+
+static inline void r8a7790_sysc_init(void) {}
+
+#endif /* CONFIG_SMP */
+
+void __init r8a7790_pm_init(void)
+{
+	static int once;
+
+	if (!once++)
+		r8a7790_sysc_init();
+}
diff --git a/arch/arm/mach-shmobile/pm-rcar.c b/arch/arm/mach-shmobile/pm-rcar.c
new file mode 100644
index 000000000000..1f465a12d1b1
--- /dev/null
+++ b/arch/arm/mach-shmobile/pm-rcar.c
@@ -0,0 +1,141 @@
+/*
+ * R-Car SYSC Power management support
+ *
+ * Copyright (C) 2014  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <mach/pm-rcar.h>
+
+/* SYSC */
+#define SYSCSR 0x00
+#define SYSCISR 0x04
+#define SYSCISCR 0x08
+
+#define PWRSR_OFFS 0x00
+#define PWROFFCR_OFFS 0x04
+#define PWRONCR_OFFS 0x0c
+#define PWRER_OFFS 0x14
+
+#define SYSCSR_RETRIES 100
+#define SYSCSR_DELAY_US 1
+
+#define SYSCISR_RETRIES 1000
+#define SYSCISR_DELAY_US 1
+
+#if defined(CONFIG_PM) || defined(CONFIG_SMP)
+
+static void __iomem *rcar_sysc_base;
+static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */
+
+static int rcar_sysc_pwr_on_off(struct rcar_sysc_ch *sysc_ch,
+				int sr_bit, int reg_offs)
+{
+	int k;
+
+	for (k = 0; k < SYSCSR_RETRIES; k++) {
+		if (ioread32(rcar_sysc_base + SYSCSR) & (1 << sr_bit))
+			break;
+		udelay(SYSCSR_DELAY_US);
+	}
+
+	if (k == SYSCSR_RETRIES)
+		return -EAGAIN;
+
+	iowrite32(1 << sysc_ch->chan_bit,
+		  rcar_sysc_base + sysc_ch->chan_offs + reg_offs);
+
+	return 0;
+}
+
+static int rcar_sysc_pwr_off(struct rcar_sysc_ch *sysc_ch)
+{
+	return rcar_sysc_pwr_on_off(sysc_ch, 0, PWROFFCR_OFFS);
+}
+
+static int rcar_sysc_pwr_on(struct rcar_sysc_ch *sysc_ch)
+{
+	return rcar_sysc_pwr_on_off(sysc_ch, 1, PWRONCR_OFFS);
+}
+
+static int rcar_sysc_update(struct rcar_sysc_ch *sysc_ch,
+			    int (*on_off_fn)(struct rcar_sysc_ch *))
+{
+	unsigned int isr_mask = 1 << sysc_ch->isr_bit;
+	unsigned int chan_mask = 1 << sysc_ch->chan_bit;
+	unsigned int status;
+	unsigned long flags;
+	int ret = 0;
+	int k;
+
+	spin_lock_irqsave(&rcar_sysc_lock, flags);
+
+	iowrite32(isr_mask, rcar_sysc_base + SYSCISCR);
+
+	do {
+		ret = on_off_fn(sysc_ch);
+		if (ret)
+			goto out;
+
+		status = ioread32(rcar_sysc_base +
+				  sysc_ch->chan_offs + PWRER_OFFS);
+	} while (status & chan_mask);
+
+	for (k = 0; k < SYSCISR_RETRIES; k++) {
+		if (ioread32(rcar_sysc_base + SYSCISR) & isr_mask)
+			break;
+		udelay(SYSCISR_DELAY_US);
+	}
+
+	if (k == SYSCISR_RETRIES)
+		ret = -EIO;
+
+	iowrite32(isr_mask, rcar_sysc_base + SYSCISCR);
+
+ out:
+	spin_unlock_irqrestore(&rcar_sysc_lock, flags);
+
+	pr_debug("sysc power domain %d: %08x -> %d\n",
+		 sysc_ch->isr_bit, ioread32(rcar_sysc_base + SYSCISR), ret);
+	return ret;
+}
+
+int rcar_sysc_power_down(struct rcar_sysc_ch *sysc_ch)
+{
+	return rcar_sysc_update(sysc_ch, rcar_sysc_pwr_off);
+}
+
+int rcar_sysc_power_up(struct rcar_sysc_ch *sysc_ch)
+{
+	return rcar_sysc_update(sysc_ch, rcar_sysc_pwr_on);
+}
+
+bool rcar_sysc_power_is_off(struct rcar_sysc_ch *sysc_ch)
+{
+	unsigned int st;
+
+	st = ioread32(rcar_sysc_base + sysc_ch->chan_offs + PWRSR_OFFS);
+	if (st & (1 << sysc_ch->chan_bit))
+		return true;
+
+	return false;
+}
+
+void __iomem *rcar_sysc_init(phys_addr_t base)
+{
+	rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
+	if (!rcar_sysc_base)
+		panic("unable to ioremap R-Car SYSC hardware block\n");
+
+	return rcar_sysc_base;
+}
+
+#endif /* CONFIG_PM || CONFIG_SMP */
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index 1fc05d9453d0..f710235aff2f 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -99,39 +99,7 @@ static int rmobile_pd_power_up(struct generic_pm_domain *genpd)
 
 static bool rmobile_pd_active_wakeup(struct device *dev)
 {
-	bool (*active_wakeup)(struct device *dev);
-
-	active_wakeup = dev_gpd_data(dev)->ops.active_wakeup;
-	return active_wakeup ? active_wakeup(dev) : true;
-}
-
-static int rmobile_pd_stop_dev(struct device *dev)
-{
-	int (*stop)(struct device *dev);
-
-	stop = dev_gpd_data(dev)->ops.stop;
-	if (stop) {
-		int ret = stop(dev);
-		if (ret)
-			return ret;
-	}
-	return pm_clk_suspend(dev);
-}
-
-static int rmobile_pd_start_dev(struct device *dev)
-{
-	int (*start)(struct device *dev);
-	int ret;
-
-	ret = pm_clk_resume(dev);
-	if (ret)
-		return ret;
-
-	start = dev_gpd_data(dev)->ops.start;
-	if (start)
-		ret = start(dev);
-
-	return ret;
+	return true;
 }
 
 static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
@@ -140,8 +108,8 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
 	struct dev_power_governor *gov = rmobile_pd->gov;
 
 	pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
-	genpd->dev_ops.stop		= rmobile_pd_stop_dev;
-	genpd->dev_ops.start		= rmobile_pd_start_dev;
+	genpd->dev_ops.stop		= pm_clk_suspend;
+	genpd->dev_ops.start		= pm_clk_resume;
 	genpd->dev_ops.active_wakeup	= rmobile_pd_active_wakeup;
 	genpd->dev_irq_safe		= true;
 	genpd->power_off		= rmobile_pd_power_down;
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index c8f2a1a69a52..d953ff6e78a2 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -21,7 +21,6 @@
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <mach/common.h>
-#include <mach/emev2.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -38,31 +37,29 @@ static struct map_desc emev2_io_desc[] __initdata = {
 #endif
 };
 
-void __init emev2_map_io(void)
+static void __init emev2_map_io(void)
 {
 	iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
 }
 
-void __init emev2_init_delay(void)
+static void __init emev2_init_delay(void)
 {
 	shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
 }
 
 static void __init emev2_add_standard_devices_dt(void)
 {
-#ifdef CONFIG_COMMON_CLK
 	of_clk_init(NULL);
-#else
-	emev2_clock_init();
-#endif
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static const char *emev2_boards_compat_dt[] __initdata = {
+static const char *emev2_boards_compat_dt[] __initconst = {
 	"renesas,emev2",
 	NULL,
 };
 
+extern struct smp_operations emev2_smp_ops;
+
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index 9c0b3a9d5f7a..412e179429cd 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -21,77 +21,26 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
-#include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r7s72100.h>
 #include <asm/mach/arch.h>
 
-#define R7S72100_SCIF(index, baseaddr, irq)				\
-static const struct plat_sci_port scif##index##_platform_data = {	\
-	.type		= PORT_SCIF,					\
-	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,		\
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,		\
-	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |	\
-			  SCSCR_REIE,					\
-};									\
-									\
-static struct resource scif##index##_resources[] = {			\
-	DEFINE_RES_MEM(baseaddr, 0x100),				\
-	DEFINE_RES_IRQ(irq + 1),					\
-	DEFINE_RES_IRQ(irq + 2),					\
-	DEFINE_RES_IRQ(irq + 3),					\
-	DEFINE_RES_IRQ(irq),						\
-}									\
-
-R7S72100_SCIF(0, 0xe8007000, gic_iid(221));
-R7S72100_SCIF(1, 0xe8007800, gic_iid(225));
-R7S72100_SCIF(2, 0xe8008000, gic_iid(229));
-R7S72100_SCIF(3, 0xe8008800, gic_iid(233));
-R7S72100_SCIF(4, 0xe8009000, gic_iid(237));
-R7S72100_SCIF(5, 0xe8009800, gic_iid(241));
-R7S72100_SCIF(6, 0xe800a000, gic_iid(245));
-R7S72100_SCIF(7, 0xe800a800, gic_iid(249));
-
-#define r7s72100_register_scif(index)					       \
-	platform_device_register_resndata(&platform_bus, "sh-sci", index,      \
-					  scif##index##_resources,	       \
-					  ARRAY_SIZE(scif##index##_resources), \
-					  &scif##index##_platform_data,	       \
-					  sizeof(scif##index##_platform_data))
-
-
-static struct sh_timer_config mtu2_0_platform_data __initdata = {
-	.name = "MTU2_0",
-	.timer_bit = 0,
-	.channel_offset = -0x80,
-	.clockevent_rating = 200,
-};
-
-static struct resource mtu2_0_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfcff0300, 0x27),
-	DEFINE_RES_IRQ(gic_iid(139)), /* MTU2 TGI0A */
+static struct resource mtu2_resources[] __initdata = {
+	DEFINE_RES_MEM(0xfcff0000, 0x400),
+	DEFINE_RES_IRQ_NAMED(gic_iid(139), "tgi0a"),
 };
 
-#define r7s72100_register_mtu2(idx)					\
-	platform_device_register_resndata(&platform_bus, "sh_mtu2",	\
-					  idx, mtu2_##idx##_resources,	\
-					  ARRAY_SIZE(mtu2_##idx##_resources), \
-					  &mtu2_##idx##_platform_data,	\
-					  sizeof(struct sh_timer_config))
+#define r7s72100_register_mtu2()					\
+	platform_device_register_resndata(&platform_bus, "sh-mtu2",	\
+					  -1, mtu2_resources,		\
+					  ARRAY_SIZE(mtu2_resources),	\
+					  NULL, 0)
 
 void __init r7s72100_add_dt_devices(void)
 {
-	r7s72100_register_scif(0);
-	r7s72100_register_scif(1);
-	r7s72100_register_scif(2);
-	r7s72100_register_scif(3);
-	r7s72100_register_scif(4);
-	r7s72100_register_scif(5);
-	r7s72100_register_scif(6);
-	r7s72100_register_scif(7);
-	r7s72100_register_mtu2(0);
+	r7s72100_register_mtu2();
 }
 
 void __init r7s72100_init_early(void)
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index cd36f8078325..9333770cfac2 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -169,20 +169,17 @@ static const struct resource thermal0_resources[] = {
 					thermal0_resources,		\
 					ARRAY_SIZE(thermal0_resources))
 
-static struct sh_timer_config cmt10_platform_data = {
-	.name = "CMT10",
-	.timer_bit = 0,
-	.clockevent_rating = 80,
+static struct sh_timer_config cmt1_platform_data = {
+	.channels_mask = 0xff,
 };
 
-static struct resource cmt10_resources[] = {
-	DEFINE_RES_MEM(0xe6130010, 0x0c),
-	DEFINE_RES_MEM(0xe6130000, 0x04),
-	DEFINE_RES_IRQ(gic_spi(120)), /* CMT1_0 */
+static struct resource cmt1_resources[] = {
+	DEFINE_RES_MEM(0xe6130000, 0x1004),
+	DEFINE_RES_IRQ(gic_spi(120)),
 };
 
 #define r8a7790_register_cmt(idx)					\
-	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+	platform_device_register_resndata(&platform_bus, "sh-cmt-48-gen2", \
 					  idx, cmt##idx##_resources,	\
 					  ARRAY_SIZE(cmt##idx##_resources), \
 					  &cmt##idx##_platform_data,	\
@@ -196,7 +193,7 @@ void __init r8a73a4_add_dt_devices(void)
 	r8a73a4_register_scif(3);
 	r8a73a4_register_scif(4);
 	r8a73a4_register_scif(5);
-	r8a7790_register_cmt(10);
+	r8a7790_register_cmt(1);
 }
 
 /* DMA */
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8f3c68101d59..35dec233301e 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -237,126 +237,45 @@ R8A7740_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(107));
 R8A7740_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(108));
 
 /* CMT */
-static struct sh_timer_config cmt10_platform_data = {
-	.name = "CMT10",
-	.channel_offset = 0x10,
-	.timer_bit = 0,
-	.clockevent_rating = 125,
-	.clocksource_rating = 125,
+static struct sh_timer_config cmt1_platform_data = {
+	.channels_mask = 0x3f,
 };
 
-static struct resource cmt10_resources[] = {
-	[0] = {
-		.name	= "CMT10",
-		.start	= 0xe6138010,
-		.end	= 0xe613801b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(58),
-		.flags	= IORESOURCE_IRQ,
-	},
+static struct resource cmt1_resources[] = {
+	DEFINE_RES_MEM(0xe6138000, 0x170),
+	DEFINE_RES_IRQ(gic_spi(58)),
 };
 
-static struct platform_device cmt10_device = {
-	.name		= "sh_cmt",
-	.id		= 10,
+static struct platform_device cmt1_device = {
+	.name		= "sh-cmt-48",
+	.id		= 1,
 	.dev = {
-		.platform_data	= &cmt10_platform_data,
+		.platform_data	= &cmt1_platform_data,
 	},
-	.resource	= cmt10_resources,
-	.num_resources	= ARRAY_SIZE(cmt10_resources),
+	.resource	= cmt1_resources,
+	.num_resources	= ARRAY_SIZE(cmt1_resources),
 };
 
 /* TMU */
-static struct sh_timer_config tmu00_platform_data = {
-	.name = "TMU00",
-	.channel_offset = 0x4,
-	.timer_bit = 0,
-	.clockevent_rating = 200,
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
 };
 
-static struct resource tmu00_resources[] = {
-	[0] = {
-		.name	= "TMU00",
-		.start	= 0xfff80008,
-		.end	= 0xfff80014 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(198),
-		.flags	= IORESOURCE_IRQ,
-	},
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xfff80000, 0x2c),
+	DEFINE_RES_IRQ(gic_spi(198)),
+	DEFINE_RES_IRQ(gic_spi(199)),
+	DEFINE_RES_IRQ(gic_spi(200)),
 };
 
-static struct platform_device tmu00_device = {
-	.name		= "sh_tmu",
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
 	.id		= 0,
 	.dev = {
-		.platform_data	= &tmu00_platform_data,
-	},
-	.resource	= tmu00_resources,
-	.num_resources	= ARRAY_SIZE(tmu00_resources),
-};
-
-static struct sh_timer_config tmu01_platform_data = {
-	.name = "TMU01",
-	.channel_offset = 0x10,
-	.timer_bit = 1,
-	.clocksource_rating = 200,
-};
-
-static struct resource tmu01_resources[] = {
-	[0] = {
-		.name	= "TMU01",
-		.start	= 0xfff80014,
-		.end	= 0xfff80020 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(199),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tmu01_device = {
-	.name		= "sh_tmu",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &tmu01_platform_data,
+		.platform_data	= &tmu0_platform_data,
 	},
-	.resource	= tmu01_resources,
-	.num_resources	= ARRAY_SIZE(tmu01_resources),
-};
-
-static struct sh_timer_config tmu02_platform_data = {
-	.name = "TMU02",
-	.channel_offset = 0x1C,
-	.timer_bit = 2,
-	.clocksource_rating = 200,
-};
-
-static struct resource tmu02_resources[] = {
-	[0] = {
-		.name	= "TMU02",
-		.start	= 0xfff80020,
-		.end	= 0xfff8002C - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(200),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tmu02_device = {
-	.name		= "sh_tmu",
-	.id		= 2,
-	.dev = {
-		.platform_data	= &tmu02_platform_data,
-	},
-	.resource	= tmu02_resources,
-	.num_resources	= ARRAY_SIZE(tmu02_resources),
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
 };
 
 /* IPMMUI (an IPMMU module for ICB/LMB) */
@@ -400,7 +319,7 @@ static struct platform_device *r8a7740_devices_dt[] __initdata = {
 	&scif6_device,
 	&scif7_device,
 	&scif8_device,
-	&cmt10_device,
+	&cmt1_device,
 };
 
 static struct platform_device *r8a7740_early_devices[] __initdata = {
@@ -408,9 +327,7 @@ static struct platform_device *r8a7740_early_devices[] __initdata = {
 	&irqpin1_device,
 	&irqpin2_device,
 	&irqpin3_device,
-	&tmu00_device,
-	&tmu01_device,
-	&tmu02_device,
+	&tmu0_device,
 	&ipmmu_device,
 };
 
@@ -765,7 +682,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = {
  *	"Media RAM (MERAM)" on r8a7740 documentation
  */
 #define MEBUFCNTR	0xFE950098
-void r8a7740_meram_workaround(void)
+void __init r8a7740_meram_workaround(void)
 {
 	void __iomem *reg;
 
@@ -869,17 +786,6 @@ void __init r8a7740_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-void __init r8a7740_add_early_devices_dt(void)
-{
-	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-
-	early_platform_add_devices(r8a7740_early_devices,
-				   ARRAY_SIZE(r8a7740_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
 void __init r8a7740_add_standard_devices_dt(void)
 {
 	platform_add_devices(r8a7740_devices_dt,
@@ -887,11 +793,6 @@ void __init r8a7740_add_standard_devices_dt(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-void __init r8a7740_init_delay(void)
-{
-	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-};
-
 void __init r8a7740_init_irq_of(void)
 {
 	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
@@ -935,9 +836,10 @@ static const char *r8a7740_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.map_io		= r8a7740_map_io,
-	.init_early	= r8a7740_init_delay,
+	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= r8a7740_generic_init,
+	.init_late	= shmobile_init_late,
 	.dt_compat	= r8a7740_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 6d694526e4ca..d311ef903b39 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -71,33 +71,20 @@ R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b));
 					  sizeof(scif##index##_platform_data))
 
 /* TMU */
-static struct resource sh_tmu0_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffd80008, 12),
-	DEFINE_RES_IRQ(gic_iid(0x40)),
-};
-
-static struct sh_timer_config sh_tmu0_platform_data __initdata = {
-	.name			= "TMU00",
-	.channel_offset		= 0x4,
-	.timer_bit		= 0,
-	.clockevent_rating	= 200,
+static struct sh_timer_config sh_tmu0_platform_data = {
+	.channels_mask = 7,
 };
 
-static struct resource sh_tmu1_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffd80014, 12),
+static struct resource sh_tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x30),
+	DEFINE_RES_IRQ(gic_iid(0x40)),
 	DEFINE_RES_IRQ(gic_iid(0x41)),
-};
-
-static struct sh_timer_config sh_tmu1_platform_data __initdata = {
-	.name			= "TMU01",
-	.channel_offset		= 0x10,
-	.timer_bit		= 1,
-	.clocksource_rating	= 200,
+	DEFINE_RES_IRQ(gic_iid(0x42)),
 };
 
 #define r8a7778_register_tmu(idx)			\
 	platform_device_register_resndata(		\
-		&platform_bus, "sh_tmu", idx,		\
+		&platform_bus, "sh-tmu", idx,		\
 		sh_tmu##idx##_resources,		\
 		ARRAY_SIZE(sh_tmu##idx##_resources),	\
 		&sh_tmu##idx##_platform_data,		\
@@ -298,10 +285,10 @@ void __init r8a7778_add_dt_devices(void)
 	void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
 	if (base) {
 		/*
-		 * Early BRESP enable, Shared attribute override enable, 64K*16way
+		 * Shared attribute override enable, 64K*16way
 		 * don't call iounmap(base)
 		 */
-		l2x0_init(base, 0x40470000, 0x82000fff);
+		l2x0_init(base, 0x00400000, 0xc20f0fff);
 	}
 #endif
 
@@ -312,7 +299,6 @@ void __init r8a7778_add_dt_devices(void)
 	r8a7778_register_scif(4);
 	r8a7778_register_scif(5);
 	r8a7778_register_tmu(0);
-	r8a7778_register_tmu(1);
 }
 
 /* HPB-DMA */
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 8e860b36997a..aba4ed652d54 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -219,64 +219,25 @@ R8A7779_SCIF(4, 0xffe44000, gic_iid(0x7c));
 R8A7779_SCIF(5, 0xffe45000, gic_iid(0x7d));
 
 /* TMU */
-static struct sh_timer_config tmu00_platform_data = {
-	.name = "TMU00",
-	.channel_offset = 0x4,
-	.timer_bit = 0,
-	.clockevent_rating = 200,
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
 };
 
-static struct resource tmu00_resources[] = {
-	[0] = {
-		.name	= "TMU00",
-		.start	= 0xffd80008,
-		.end	= 0xffd80013,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x40),
-		.flags	= IORESOURCE_IRQ,
-	},
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80000, 0x30),
+	DEFINE_RES_IRQ(gic_iid(0x40)),
+	DEFINE_RES_IRQ(gic_iid(0x41)),
+	DEFINE_RES_IRQ(gic_iid(0x42)),
 };
 
-static struct platform_device tmu00_device = {
-	.name		= "sh_tmu",
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
 	.id		= 0,
 	.dev = {
-		.platform_data	= &tmu00_platform_data,
-	},
-	.resource	= tmu00_resources,
-	.num_resources	= ARRAY_SIZE(tmu00_resources),
-};
-
-static struct sh_timer_config tmu01_platform_data = {
-	.name = "TMU01",
-	.channel_offset = 0x10,
-	.timer_bit = 1,
-	.clocksource_rating = 200,
-};
-
-static struct resource tmu01_resources[] = {
-	[0] = {
-		.name	= "TMU01",
-		.start	= 0xffd80014,
-		.end	= 0xffd8001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x41),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tmu01_device = {
-	.name		= "sh_tmu",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &tmu01_platform_data,
+		.platform_data	= &tmu0_platform_data,
 	},
-	.resource	= tmu01_resources,
-	.num_resources	= ARRAY_SIZE(tmu01_resources),
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
 };
 
 /* I2C */
@@ -685,8 +646,7 @@ static struct platform_device *r8a7779_devices_dt[] __initdata = {
 	&scif3_device,
 	&scif4_device,
 	&scif5_device,
-	&tmu00_device,
-	&tmu01_device,
+	&tmu0_device,
 };
 
 static struct platform_device *r8a7779_standard_devices[] __initdata = {
@@ -700,8 +660,8 @@ static struct platform_device *r8a7779_standard_devices[] __initdata = {
 void __init r8a7779_add_standard_devices(void)
 {
 #ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 64K*16way */
-	l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff);
+	/* Shared attribute override enable, 64K*16way */
+	l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
 #endif
 	r8a7779_pm_init();
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 6ab37aa1e919..6bd08b127fa4 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -24,12 +24,100 @@
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
 #include <linux/sh_timer.h>
 #include <mach/common.h>
+#include <mach/dma-register.h>
 #include <mach/irqs.h>
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
+/* Audio-DMAC */
+#define AUDIO_DMAC_SLAVE(_id, _addr, t, r)			\
+{								\
+	.slave_id	= AUDIO_DMAC_SLAVE_## _id ##_TX,	\
+	.addr		= _addr + 0x8,				\
+	.chcr		= CHCR_TX(XMIT_SZ_32BIT),		\
+	.mid_rid	= t,					\
+}, {								\
+	.slave_id	= AUDIO_DMAC_SLAVE_## _id ##_RX,	\
+	.addr		= _addr + 0xc,				\
+	.chcr		= CHCR_RX(XMIT_SZ_32BIT),		\
+	.mid_rid	= r,					\
+}
+
+static const struct sh_dmae_slave_config r8a7790_audio_dmac_slaves[] = {
+	AUDIO_DMAC_SLAVE(SSI0, 0xec241000, 0x01, 0x02),
+	AUDIO_DMAC_SLAVE(SSI1, 0xec241040, 0x03, 0x04),
+	AUDIO_DMAC_SLAVE(SSI2, 0xec241080, 0x05, 0x06),
+	AUDIO_DMAC_SLAVE(SSI3, 0xec2410c0, 0x07, 0x08),
+	AUDIO_DMAC_SLAVE(SSI4, 0xec241100, 0x09, 0x0a),
+	AUDIO_DMAC_SLAVE(SSI5, 0xec241140, 0x0b, 0x0c),
+	AUDIO_DMAC_SLAVE(SSI6, 0xec241180, 0x0d, 0x0e),
+	AUDIO_DMAC_SLAVE(SSI7, 0xec2411c0, 0x0f, 0x10),
+	AUDIO_DMAC_SLAVE(SSI8, 0xec241200, 0x11, 0x12),
+	AUDIO_DMAC_SLAVE(SSI9, 0xec241240, 0x13, 0x14),
+};
+
+#define DMAE_CHANNEL(a, b)			\
+{						\
+	.offset		= (a) - 0x20,		\
+	.dmars		= (a) - 0x20 + 0x40,	\
+	.chclr_bit	= (b),			\
+	.chclr_offset	= 0x80 - 0x20,		\
+}
+
+static const struct sh_dmae_channel r8a7790_audio_dmac_channels[] = {
+	DMAE_CHANNEL(0x8000, 0),
+	DMAE_CHANNEL(0x8080, 1),
+	DMAE_CHANNEL(0x8100, 2),
+	DMAE_CHANNEL(0x8180, 3),
+	DMAE_CHANNEL(0x8200, 4),
+	DMAE_CHANNEL(0x8280, 5),
+	DMAE_CHANNEL(0x8300, 6),
+	DMAE_CHANNEL(0x8380, 7),
+	DMAE_CHANNEL(0x8400, 8),
+	DMAE_CHANNEL(0x8480, 9),
+	DMAE_CHANNEL(0x8500, 10),
+	DMAE_CHANNEL(0x8580, 11),
+	DMAE_CHANNEL(0x8600, 12),
+};
+
+static struct sh_dmae_pdata r8a7790_audio_dmac_platform_data = {
+	.slave		= r8a7790_audio_dmac_slaves,
+	.slave_num	= ARRAY_SIZE(r8a7790_audio_dmac_slaves),
+	.channel	= r8a7790_audio_dmac_channels,
+	.channel_num	= ARRAY_SIZE(r8a7790_audio_dmac_channels),
+	.ts_low_shift	= TS_LOW_SHIFT,
+	.ts_low_mask	= TS_LOW_BIT << TS_LOW_SHIFT,
+	.ts_high_shift	= TS_HI_SHIFT,
+	.ts_high_mask	= TS_HI_BIT << TS_HI_SHIFT,
+	.ts_shift	= dma_ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(dma_ts_shift),
+	.dmaor_init	= DMAOR_DME,
+	.chclr_present	= 1,
+	.chclr_bitwise	= 1,
+};
+
+static struct resource r8a7790_audio_dmac_resources[] = {
+	/* Channel registers and DMAOR for low */
+	DEFINE_RES_MEM(0xec700020, 0x8663 - 0x20),
+	DEFINE_RES_IRQ(gic_spi(346)),
+	DEFINE_RES_NAMED(gic_spi(320), 13, NULL, IORESOURCE_IRQ),
+
+	/* Channel registers and DMAOR for hi */
+	DEFINE_RES_MEM(0xec720020, 0x8663 - 0x20), /* hi */
+	DEFINE_RES_IRQ(gic_spi(347)),
+	DEFINE_RES_NAMED(gic_spi(333), 13, NULL, IORESOURCE_IRQ),
+};
+
+#define r8a7790_register_audio_dmac(id)				\
+	platform_device_register_resndata(			\
+		&platform_bus, "sh-dma-engine", id,		\
+		&r8a7790_audio_dmac_resources[id * 3],	3,	\
+		&r8a7790_audio_dmac_platform_data,		\
+		sizeof(r8a7790_audio_dmac_platform_data))
+
 static const struct resource pfc_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe6060000, 0x250),
 };
@@ -97,10 +185,6 @@ void __init r8a7790_pinmux_init(void)
 	r8a7790_register_gpio(3);
 	r8a7790_register_gpio(4);
 	r8a7790_register_gpio(5);
-	r8a7790_register_i2c(0);
-	r8a7790_register_i2c(1);
-	r8a7790_register_i2c(2);
-	r8a7790_register_i2c(3);
 }
 
 #define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq)		\
@@ -179,20 +263,17 @@ static const struct resource thermal_resources[] __initconst = {
 					thermal_resources,		\
 					ARRAY_SIZE(thermal_resources))
 
-static const struct sh_timer_config cmt00_platform_data __initconst = {
-	.name = "CMT00",
-	.timer_bit = 0,
-	.clockevent_rating = 80,
+static struct sh_timer_config cmt0_platform_data = {
+	.channels_mask = 0x60,
 };
 
-static const struct resource cmt00_resources[] __initconst = {
-	DEFINE_RES_MEM(0xffca0510, 0x0c),
-	DEFINE_RES_MEM(0xffca0500, 0x04),
-	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
+static struct resource cmt0_resources[] = {
+	DEFINE_RES_MEM(0xffca0000, 0x1004),
+	DEFINE_RES_IRQ(gic_spi(142)),
 };
 
 #define r8a7790_register_cmt(idx)					\
-	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+	platform_device_register_resndata(&platform_bus, "sh-cmt-48-gen2", \
 					  idx, cmt##idx##_resources,	\
 					  ARRAY_SIZE(cmt##idx##_resources), \
 					  &cmt##idx##_platform_data,	\
@@ -200,6 +281,11 @@ static const struct resource cmt00_resources[] __initconst = {
 
 void __init r8a7790_add_dt_devices(void)
 {
+	r8a7790_register_cmt(0);
+}
+
+void __init r8a7790_add_standard_devices(void)
+{
 	r8a7790_register_scif(0);
 	r8a7790_register_scif(1);
 	r8a7790_register_scif(2);
@@ -210,14 +296,15 @@ void __init r8a7790_add_dt_devices(void)
 	r8a7790_register_scif(7);
 	r8a7790_register_scif(8);
 	r8a7790_register_scif(9);
-	r8a7790_register_cmt(00);
-}
-
-void __init r8a7790_add_standard_devices(void)
-{
 	r8a7790_add_dt_devices();
 	r8a7790_register_irqc(0);
 	r8a7790_register_thermal();
+	r8a7790_register_i2c(0);
+	r8a7790_register_i2c(1);
+	r8a7790_register_i2c(2);
+	r8a7790_register_i2c(3);
+	r8a7790_register_audio_dmac(0);
+	r8a7790_register_audio_dmac(1);
 }
 
 void __init r8a7790_init_early(void)
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index e28404e43860..04a96ddb3224 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -128,20 +128,17 @@ R8A7791_SCIFA(14, 0xe6c80000, gic_spi(31)); /* SCIFA5 */
 					  &scif##index##_platform_data,	       \
 					  sizeof(scif##index##_platform_data))
 
-static const struct sh_timer_config cmt00_platform_data __initconst = {
-	.name = "CMT00",
-	.timer_bit = 0,
-	.clockevent_rating = 80,
+static struct sh_timer_config cmt0_platform_data = {
+	.channels_mask = 0x60,
 };
 
-static const struct resource cmt00_resources[] __initconst = {
-	DEFINE_RES_MEM(0xffca0510, 0x0c),
-	DEFINE_RES_MEM(0xffca0500, 0x04),
-	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
+static struct resource cmt0_resources[] = {
+	DEFINE_RES_MEM(0xffca0000, 0x1004),
+	DEFINE_RES_IRQ(gic_spi(142)),
 };
 
 #define r8a7791_register_cmt(idx)					\
-	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+	platform_device_register_resndata(&platform_bus, "sh-cmt-48-gen2", \
 					  idx, cmt##idx##_resources,	\
 					  ARRAY_SIZE(cmt##idx##_resources), \
 					  &cmt##idx##_platform_data,	\
@@ -185,6 +182,11 @@ static const struct resource thermal_resources[] __initconst = {
 
 void __init r8a7791_add_dt_devices(void)
 {
+	r8a7791_register_cmt(0);
+}
+
+void __init r8a7791_add_standard_devices(void)
+{
 	r8a7791_register_scif(0);
 	r8a7791_register_scif(1);
 	r8a7791_register_scif(2);
@@ -200,23 +202,11 @@ void __init r8a7791_add_dt_devices(void)
 	r8a7791_register_scif(12);
 	r8a7791_register_scif(13);
 	r8a7791_register_scif(14);
-	r8a7791_register_cmt(00);
-}
-
-void __init r8a7791_add_standard_devices(void)
-{
 	r8a7791_add_dt_devices();
 	r8a7791_register_irqc(0);
 	r8a7791_register_thermal();
 }
 
-void __init r8a7791_init_early(void)
-{
-#ifndef CONFIG_ARM_ARCH_TIMER
-	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
-#endif
-}
-
 #ifdef CONFIG_USE_OF
 static const char *r8a7791_boards_compat_dt[] __initdata = {
 	"renesas,r8a7791",
@@ -225,7 +215,7 @@ static const char *r8a7791_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
 	.smp		= smp_ops(r8a7791_smp_ops),
-	.init_early	= r8a7791_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.dt_compat	= r8a7791_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 69ccc6c6fd33..542c5a47173f 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -28,14 +28,18 @@
 
 #define MODEMR 0xe6160060
 
-u32 __init rcar_gen2_read_mode_pins(void)
+u32 rcar_gen2_read_mode_pins(void)
 {
-	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
-	u32 mode;
-
-	BUG_ON(!modemr);
-	mode = ioread32(modemr);
-	iounmap(modemr);
+	static u32 mode;
+	static bool mode_valid;
+
+	if (!mode_valid) {
+		void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+		BUG_ON(!modemr);
+		mode = ioread32(modemr);
+		iounmap(modemr);
+		mode_valid = true;
+	}
 
 	return mode;
 }
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 27301278c208..2a8b9f2a2f54 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -119,28 +119,16 @@ SH7372_SCIF(PORT_SCIFB, 6, 0xe6c30000, evt2irq(0x0d60));
 
 /* CMT */
 static struct sh_timer_config cmt2_platform_data = {
-	.name = "CMT2",
-	.channel_offset = 0x40,
-	.timer_bit = 5,
-	.clockevent_rating = 125,
-	.clocksource_rating = 125,
+	.channels_mask = 0x20,
 };
 
 static struct resource cmt2_resources[] = {
-	[0] = {
-		.name	= "CMT2",
-		.start	= 0xe6130040,
-		.end	= 0xe613004b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0b80), /* CMT2 */
-		.flags	= IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(0xe6130000, 0x50),
+	DEFINE_RES_IRQ(evt2irq(0x0b80)),
 };
 
 static struct platform_device cmt2_device = {
-	.name		= "sh_cmt",
+	.name		= "sh-cmt-32-fast",
 	.id		= 2,
 	.dev = {
 		.platform_data	= &cmt2_platform_data,
@@ -150,64 +138,25 @@ static struct platform_device cmt2_device = {
 };
 
 /* TMU */
-static struct sh_timer_config tmu00_platform_data = {
-	.name = "TMU00",
-	.channel_offset = 0x4,
-	.timer_bit = 0,
-	.clockevent_rating = 200,
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
 };
 
-static struct resource tmu00_resources[] = {
-	[0] = {
-		.name	= "TMU00",
-		.start	= 0xfff60008,
-		.end	= 0xfff60013,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0xe80), /* TMU_TUNI0 */
-		.flags	= IORESOURCE_IRQ,
-	},
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xfff60000, 0x2c),
+	DEFINE_RES_IRQ(intcs_evt2irq(0xe80)),
+	DEFINE_RES_IRQ(intcs_evt2irq(0xea0)),
+	DEFINE_RES_IRQ(intcs_evt2irq(0xec0)),
 };
 
-static struct platform_device tmu00_device = {
-	.name		= "sh_tmu",
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
 	.id		= 0,
 	.dev = {
-		.platform_data	= &tmu00_platform_data,
-	},
-	.resource	= tmu00_resources,
-	.num_resources	= ARRAY_SIZE(tmu00_resources),
-};
-
-static struct sh_timer_config tmu01_platform_data = {
-	.name = "TMU01",
-	.channel_offset = 0x10,
-	.timer_bit = 1,
-	.clocksource_rating = 200,
-};
-
-static struct resource tmu01_resources[] = {
-	[0] = {
-		.name	= "TMU01",
-		.start	= 0xfff60014,
-		.end	= 0xfff6001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0xea0), /* TMU_TUNI1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tmu01_device = {
-	.name		= "sh_tmu",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &tmu01_platform_data,
+		.platform_data	= &tmu0_platform_data,
 	},
-	.resource	= tmu01_resources,
-	.num_resources	= ARRAY_SIZE(tmu01_resources),
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
 };
 
 /* I2C */
@@ -952,8 +901,7 @@ static struct platform_device *sh7372_early_devices[] __initdata = {
 	&scif5_device,
 	&scif6_device,
 	&cmt2_device,
-	&tmu00_device,
-	&tmu01_device,
+	&tmu0_device,
 	&ipmmu_device,
 };
 
@@ -1000,8 +948,7 @@ void __init sh7372_add_standard_devices(void)
 		{ "A4R", &veu2_device, },
 		{ "A4R", &veu3_device, },
 		{ "A4R", &jpu_device, },
-		{ "A4R", &tmu00_device, },
-		{ "A4R", &tmu01_device, },
+		{ "A4R", &tmu0_device, },
 	};
 
 	sh7372_init_pm_domains();
@@ -1037,11 +984,7 @@ void __init sh7372_add_early_devices_dt(void)
 {
 	shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */
 
-	early_platform_add_devices(sh7372_early_devices,
-				   ARRAY_SIZE(sh7372_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
+	sh7372_add_early_devices();
 }
 
 void __init sh7372_add_standard_devices_dt(void)
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index f74ab530c71d..ad00724a2269 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -104,86 +104,45 @@ SH73A0_SCIF(PORT_SCIFA, 6, 0xe6cc0000, gic_spi(156));
 SH73A0_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(143));
 SH73A0_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(80));
 
-static struct sh_timer_config cmt10_platform_data = {
-	.name = "CMT10",
-	.channel_offset = 0x10,
-	.timer_bit = 0,
-	.clockevent_rating = 80,
-	.clocksource_rating = 125,
+static struct sh_timer_config cmt1_platform_data = {
+	.channels_mask = 0x3f,
 };
 
-static struct resource cmt10_resources[] = {
-	[0] = {
-		.name	= "CMT10",
-		.start	= 0xe6138010,
-		.end	= 0xe613801b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(65),
-		.flags	= IORESOURCE_IRQ,
-	},
+static struct resource cmt1_resources[] = {
+	DEFINE_RES_MEM(0xe6138000, 0x200),
+	DEFINE_RES_IRQ(gic_spi(65)),
 };
 
-static struct platform_device cmt10_device = {
-	.name		= "sh_cmt",
-	.id		= 10,
+static struct platform_device cmt1_device = {
+	.name		= "sh-cmt-48",
+	.id		= 1,
 	.dev = {
-		.platform_data	= &cmt10_platform_data,
+		.platform_data	= &cmt1_platform_data,
 	},
-	.resource	= cmt10_resources,
-	.num_resources	= ARRAY_SIZE(cmt10_resources),
+	.resource	= cmt1_resources,
+	.num_resources	= ARRAY_SIZE(cmt1_resources),
 };
 
 /* TMU */
-static struct sh_timer_config tmu00_platform_data = {
-	.name = "TMU00",
-	.channel_offset = 0x4,
-	.timer_bit = 0,
-	.clockevent_rating = 200,
+static struct sh_timer_config tmu0_platform_data = {
+	.channels_mask = 7,
 };
 
-static struct resource tmu00_resources[] = {
-	[0] = DEFINE_RES_MEM(0xfff60008, 0xc),
-	[1] = {
-		.start	= intcs_evt2irq(0x0e80), /* TMU0_TUNI00 */
-		.flags	= IORESOURCE_IRQ,
-	},
+static struct resource tmu0_resources[] = {
+	DEFINE_RES_MEM(0xfff60000, 0x2c),
+	DEFINE_RES_IRQ(intcs_evt2irq(0xe80)),
+	DEFINE_RES_IRQ(intcs_evt2irq(0xea0)),
+	DEFINE_RES_IRQ(intcs_evt2irq(0xec0)),
 };
 
-static struct platform_device tmu00_device = {
-	.name		= "sh_tmu",
+static struct platform_device tmu0_device = {
+	.name		= "sh-tmu",
 	.id		= 0,
 	.dev = {
-		.platform_data	= &tmu00_platform_data,
-	},
-	.resource	= tmu00_resources,
-	.num_resources	= ARRAY_SIZE(tmu00_resources),
-};
-
-static struct sh_timer_config tmu01_platform_data = {
-	.name = "TMU01",
-	.channel_offset = 0x10,
-	.timer_bit = 1,
-	.clocksource_rating = 200,
-};
-
-static struct resource tmu01_resources[] = {
-	[0] = DEFINE_RES_MEM(0xfff60014, 0xc),
-	[1] = {
-		.start	= intcs_evt2irq(0x0ea0), /* TMU0_TUNI01 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tmu01_device = {
-	.name		= "sh_tmu",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &tmu01_platform_data,
+		.platform_data	= &tmu0_platform_data,
 	},
-	.resource	= tmu01_resources,
-	.num_resources	= ARRAY_SIZE(tmu01_resources),
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
 };
 
 static struct resource i2c0_resources[] = {
@@ -746,12 +705,11 @@ static struct platform_device *sh73a0_devices_dt[] __initdata = {
 	&scif6_device,
 	&scif7_device,
 	&scif8_device,
-	&cmt10_device,
+	&cmt1_device,
 };
 
 static struct platform_device *sh73a0_early_devices[] __initdata = {
-	&tmu00_device,
-	&tmu01_device,
+	&tmu0_device,
 	&ipmmu_device,
 };
 
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index f2ca92308f75..2dfd748da7f3 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -24,7 +24,6 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <mach/common.h>
-#include <mach/emev2.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 627c1f0d9478..e7a3201473d0 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <mach/common.h>
+#include <mach/pm-rcar.h>
 #include <mach/r8a7779.h>
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
@@ -33,25 +34,25 @@
 #define AVECR IOMEM(0xfe700040)
 #define R8A7779_SCU_BASE 0xf0000000
 
-static struct r8a7779_pm_ch r8a7779_ch_cpu1 = {
+static struct rcar_sysc_ch r8a7779_ch_cpu1 = {
 	.chan_offs = 0x40, /* PWRSR0 .. PWRER0 */
 	.chan_bit = 1, /* ARM1 */
 	.isr_bit = 1, /* ARM1 */
 };
 
-static struct r8a7779_pm_ch r8a7779_ch_cpu2 = {
+static struct rcar_sysc_ch r8a7779_ch_cpu2 = {
 	.chan_offs = 0x40, /* PWRSR0 .. PWRER0 */
 	.chan_bit = 2, /* ARM2 */
 	.isr_bit = 2, /* ARM2 */
 };
 
-static struct r8a7779_pm_ch r8a7779_ch_cpu3 = {
+static struct rcar_sysc_ch r8a7779_ch_cpu3 = {
 	.chan_offs = 0x40, /* PWRSR0 .. PWRER0 */
 	.chan_bit = 3, /* ARM3 */
 	.isr_bit = 3, /* ARM3 */
 };
 
-static struct r8a7779_pm_ch *r8a7779_ch_cpu[4] = {
+static struct rcar_sysc_ch *r8a7779_ch_cpu[4] = {
 	[1] = &r8a7779_ch_cpu1,
 	[2] = &r8a7779_ch_cpu2,
 	[3] = &r8a7779_ch_cpu3,
@@ -67,7 +68,7 @@ void __init r8a7779_register_twd(void)
 
 static int r8a7779_platform_cpu_kill(unsigned int cpu)
 {
-	struct r8a7779_pm_ch *ch = NULL;
+	struct rcar_sysc_ch *ch = NULL;
 	int ret = -EIO;
 
 	cpu = cpu_logical_map(cpu);
@@ -76,14 +77,14 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu)
 		ch = r8a7779_ch_cpu[cpu];
 
 	if (ch)
-		ret = r8a7779_sysc_power_down(ch);
+		ret = rcar_sysc_power_down(ch);
 
 	return ret ? ret : 1;
 }
 
 static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	struct r8a7779_pm_ch *ch = NULL;
+	struct rcar_sysc_ch *ch = NULL;
 	unsigned int lcpu = cpu_logical_map(cpu);
 	int ret;
 
@@ -91,7 +92,7 @@ static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		ch = r8a7779_ch_cpu[lcpu];
 
 	if (ch)
-		ret = r8a7779_sysc_power_up(ch);
+		ret = rcar_sysc_power_up(ch);
 	else
 		ret = -EIO;
 
diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c
index 015e2753de1f..591052799e8f 100644
--- a/arch/arm/mach-shmobile/smp-r8a7790.c
+++ b/arch/arm/mach-shmobile/smp-r8a7790.c
@@ -19,6 +19,8 @@
 #include <linux/io.h>
 #include <asm/smp_plat.h>
 #include <mach/common.h>
+#include <mach/pm-rcar.h>
+#include <mach/r8a7790.h>
 
 #define RST		0xe6160000
 #define CA15BAR		0x0020
@@ -27,6 +29,16 @@
 #define CA7RESCNT	0x0044
 #define MERAM		0xe8080000
 
+static struct rcar_sysc_ch r8a7790_ca15_scu = {
+	.chan_offs = 0x180, /* PWRSR5 .. PWRER5 */
+	.isr_bit = 12, /* CA15-SCU */
+};
+
+static struct rcar_sysc_ch r8a7790_ca7_scu = {
+	.chan_offs = 0x100, /* PWRSR3 .. PWRER3 */
+	.isr_bit = 21, /* CA7-SCU */
+};
+
 static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
 {
 	void __iomem *p;
@@ -54,6 +66,11 @@ static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
 	writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000,
 		       p + CA7RESCNT);
 	iounmap(p);
+
+	/* turn on power to SCU */
+	r8a7790_pm_init();
+	rcar_sysc_power_up(&r8a7790_ca15_scu);
+	rcar_sysc_power_up(&r8a7790_ca7_scu);
 }
 
 struct smp_operations r8a7790_smp_ops __initdata = {
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
index 2df5bd190fe4..ec979529f30f 100644
--- a/arch/arm/mach-shmobile/smp-r8a7791.c
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -20,6 +20,7 @@
 #include <asm/smp_plat.h>
 #include <mach/common.h>
 #include <mach/r8a7791.h>
+#include <mach/rcar-gen2.h>
 
 #define RST		0xe6160000
 #define CA15BAR		0x0020
@@ -51,9 +52,21 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
 	iounmap(p);
 }
 
+static int r8a7791_smp_boot_secondary(unsigned int cpu,
+				      struct task_struct *idle)
+{
+	/* Error out when hardware debug mode is enabled */
+	if (rcar_gen2_read_mode_pins() & BIT(21)) {
+		pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu);
+		return -ENOTSUPP;
+	}
+
+	return shmobile_smp_apmu_boot_secondary(cpu, idle);
+}
+
 struct smp_operations r8a7791_smp_ops __initdata = {
 	.smp_prepare_cpus	= r8a7791_smp_prepare_cpus,
-	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
+	.smp_boot_secondary	= r8a7791_smp_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_disable		= shmobile_smp_cpu_disable,
 	.cpu_die		= shmobile_smp_apmu_cpu_die,
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 62d7052d6f21..68bc0b82226d 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -21,6 +21,24 @@
 #include <linux/platform_device.h>
 #include <linux/clocksource.h>
 #include <linux/delay.h>
+#include <linux/of_address.h>
+
+void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
+				    unsigned int mult, unsigned int div)
+{
+	/* calculate a worst-case loops-per-jiffy value
+	 * based on maximum cpu core hz setting and the
+	 * __delay() implementation in arch/arm/lib/delay.S
+	 *
+	 * this will result in a longer delay than expected
+	 * when the cpu core runs on lower frequencies.
+	 */
+
+	unsigned int value = HZ * div / mult;
+
+	if (!preset_lpj)
+		preset_lpj = max_cpu_core_hz / value;
+}
 
 void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 				 unsigned int mult, unsigned int div)
@@ -39,6 +57,33 @@ void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 		preset_lpj = max_cpu_core_mhz * value;
 }
 
+void __init shmobile_init_delay(void)
+{
+	struct device_node *np, *parent;
+	u32 max_freq, freq;
+
+	max_freq = 0;
+
+	parent = of_find_node_by_path("/cpus");
+	if (parent) {
+		for_each_child_of_node(parent, np) {
+			if (!of_property_read_u32(np, "clock-frequency", &freq))
+				max_freq = max(max_freq, freq);
+		}
+		of_node_put(parent);
+	}
+
+	if (max_freq) {
+		if (of_find_compatible_node(NULL, NULL, "arm,cortex-a8"))
+			shmobile_setup_delay_hz(max_freq, 1, 3);
+		else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
+			shmobile_setup_delay_hz(max_freq, 1, 3);
+		else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a15"))
+			if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
+				shmobile_setup_delay_hz(max_freq, 2, 4);
+	}
+}
+
 static void __init shmobile_late_time_init(void)
 {
 	/*
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index aee77f06f887..b5f8d75d51a0 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -1,17 +1,10 @@
 config ARCH_SOCFPGA
 	bool "Altera SOCFPGA family" if ARCH_MULTI_V7
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
 	select ARM_GIC
 	select CACHE_L2X0
-	select COMMON_CLK
-	select CPU_V7
 	select DW_APB_TIMER_OF
-	select GENERIC_CLOCKEVENTS
 	select GPIO_PL061 if GPIOLIB
 	select HAVE_ARM_SCU
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
 	select MFD_SYSCON
-	select SPARSE_IRQ
-	select USE_OF
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index dd0d49cdbe09..adbf38314ca8 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -29,7 +29,6 @@
 void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE));
 void __iomem *sys_manager_base_addr;
 void __iomem *rst_manager_base_addr;
-void __iomem *clk_mgr_base_addr;
 unsigned long cpu1start_addr;
 
 static struct map_desc scu_io_desc __initdata = {
@@ -78,9 +77,6 @@ void __init socfpga_sysmgr_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr");
 	rst_manager_base_addr = of_iomap(np, 0);
-
-	np = of_find_compatible_node(NULL, NULL, "altr,clk-mgr");
-	clk_mgr_base_addr = of_iomap(np, 0);
 }
 
 static void __init socfpga_init_irq(void)
@@ -102,23 +98,17 @@ static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
 	writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL);
 }
 
-static void __init socfpga_cyclone5_init(void)
-{
-	l2x0_of_init(0, ~0UL);
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	socfpga_init_clocks();
-}
-
 static const char *altera_dt_match[] = {
 	"altr,socfpga",
 	NULL
 };
 
 DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
 	.smp		= smp_ops(socfpga_smp_ops),
 	.map_io		= socfpga_map_io,
 	.init_irq	= socfpga_init_irq,
-	.init_machine	= socfpga_cyclone5_init,
 	.restart	= socfpga_cyclone5_restart,
 	.dt_compat	= altera_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index ac1710e64d9a..0786249b2832 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -8,8 +8,6 @@ menuconfig PLAT_SPEAR
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKSRC_MMIO
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
 
 if PLAT_SPEAR
 
@@ -18,14 +16,10 @@ config ARCH_SPEAR13XX
 	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
 	select ARCH_HAS_CPUFREQ
 	select ARM_GIC
-	select CPU_V7
 	select GPIO_SPEAR_SPICS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
-	select USE_OF
 	help
 	  Supports for ARM's SPEAR13XX family
 
@@ -50,9 +44,7 @@ config ARCH_SPEAR3XX
 	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
-	select CPU_ARM926T
 	select PINCTRL
-	select USE_OF
 	help
 	  Supports for ARM's SPEAR3XX family
 
@@ -83,16 +75,14 @@ config ARCH_SPEAR6XX
 	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
-	select CPU_ARM926T
 	help
 	  Supports for ARM's SPEAR6XX family
 
 config MACH_SPEAR600
 	def_bool y
 	depends on ARCH_SPEAR6XX
-	select USE_OF
 	help
-	  Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig"
+	  Supports ST SPEAr600 boards configured via the device-tree
 
 config ARCH_SPEAR_AUTO
 	def_bool PLAT_SPEAR_SINGLE
diff --git a/arch/arm/mach-spear/headsmp.S b/arch/arm/mach-spear/headsmp.S
index ed85473a047f..c52192dc3d9f 100644
--- a/arch/arm/mach-spear/headsmp.S
+++ b/arch/arm/mach-spear/headsmp.S
@@ -3,7 +3,7 @@
  *
  * Picked from realview
  * Copyright (c) 2012 ST Microelectronics Limited
- * Shiraz Hashim <shiraz.hashim@st.com>
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-spear/include/mach/timex.h b/arch/arm/mach-spear/include/mach/timex.h
deleted file mode 100644
index ef95e5b780bd..000000000000
--- a/arch/arm/mach-spear/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/timex.h
- *
- * SPEAr platform specific timex definitions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_TIMEX_H
-#define __PLAT_TIMEX_H
-
-#define CLOCK_TICK_RATE			48000000
-
-#endif /* __PLAT_TIMEX_H */
diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c
index 5c4a19887b2b..fd4297713d67 100644
--- a/arch/arm/mach-spear/platsmp.c
+++ b/arch/arm/mach-spear/platsmp.c
@@ -4,7 +4,7 @@
  * based upon linux/arch/arm/mach-realview/platsmp.c
  *
  * Copyright (C) 2012 ST Microelectronics Ltd.
- * Shiraz Hashim <shiraz.hashim@st.com>
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -20,6 +20,18 @@
 #include <mach/spear.h>
 #include "generic.h"
 
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void write_pen_release(int val)
+{
+	pen_release = val;
+	smp_wmb();
+	sync_cache_w(&pen_release);
+}
+
 static DEFINE_SPINLOCK(boot_lock);
 
 static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
@@ -30,8 +42,7 @@ static void spear13xx_secondary_init(unsigned int cpu)
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
-	pen_release = -1;
-	smp_wmb();
+	write_pen_release(-1);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -58,9 +69,7 @@ static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * Note that "pen_release" is the hardware CPU ID, whereas
 	 * "cpu" is Linux's internal ID.
 	 */
-	pen_release = cpu;
-	flush_cache_all();
-	outer_flush_all();
+	write_pen_release(cpu);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c
index 7ad003001ab7..824b12a56a42 100644
--- a/arch/arm/mach-spear/spear1310.c
+++ b/arch/arm/mach-spear/spear1310.c
@@ -28,6 +28,7 @@
 static void __init spear1310_dt_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	platform_device_register_simple("spear-cpufreq", -1, NULL, 0);
 }
 
 static const char * const spear1310_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index 3fb683424729..7b6bff7154e1 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -143,6 +143,7 @@ static void __init spear1340_dt_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table,
 			spear1340_auxdata_lookup, NULL);
+	platform_device_register_simple("spear-cpufreq", -1, NULL, 0);
 }
 
 static const char * const spear1340_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index 7aa6e8cf830f..c9897ea38980 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -38,15 +38,15 @@ void __init spear13xx_l2x0_init(void)
 	if (!IS_ENABLED(CONFIG_CACHE_L2X0))
 		return;
 
-	writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL);
+	writel_relaxed(0x06, VA_L2CC_BASE + L310_PREFETCH_CTRL);
 
 	/*
 	 * Program following latencies in order to make
 	 * SPEAr1340 work at 600 MHz
 	 */
-	writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL);
-	writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL);
-	l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff);
+	writel_relaxed(0x221, VA_L2CC_BASE + L310_TAG_LATENCY_CTRL);
+	writel_relaxed(0x441, VA_L2CC_BASE + L310_DATA_LATENCY_CTRL);
+	l2x0_init(VA_L2CC_BASE, 0x30a00001, 0xfe0fffff);
 }
 
 /*
diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
index d449673e40f7..26fda4ed4d51 100644
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -2,7 +2,7 @@
  * arch/arm/plat-spear/time.c
  *
  * Copyright (C) 2010 ST Microelectronics
- * Shiraz Hashim<shiraz.hashim@st.com>
+ * Shiraz Hashim<shiraz.linux.kernel@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -71,7 +71,7 @@ static void clockevent_set_mode(enum clock_event_mode mode,
 static int clockevent_next_event(unsigned long evt,
 				 struct clock_event_device *clk_event_dev);
 
-static void spear_clocksource_init(void)
+static void __init spear_clocksource_init(void)
 {
 	u32 tick_rate;
 	u16 val;
@@ -172,7 +172,7 @@ static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction spear_timer_irq = {
 	.name = "timer",
-	.flags = IRQF_DISABLED | IRQF_TIMER,
+	.flags = IRQF_TIMER,
 	.handler = spear_timer_interrupt
 };
 
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index d71654bc8d54..abf9ee9bbc3f 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -1,14 +1,11 @@
 menuconfig ARCH_STI
 	bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7
-	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
 	select ARM_GIC
 	select ARM_GLOBAL_TIMER
 	select PINCTRL
 	select PINCTRL_ST
 	select MFD_SYSCON
-	select MIGHT_HAVE_CACHE_L2X0
-	select HAVE_SMP
+	select ARCH_HAS_RESET_CONTROLLER
 	select HAVE_ARM_SCU if SMP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_ERRATA_754322
@@ -28,6 +25,7 @@ if ARCH_STI
 config SOC_STIH415
 	bool "STiH415 STMicroelectronics Consumer Electronics family"
 	default y
+	select STIH415_RESET
 	help
 	  This enables support for STMicroelectronics Digital Consumer
 	  Electronics family StiH415 parts, primarily targeted at set-top-box
@@ -37,6 +35,7 @@ config SOC_STIH415
 config SOC_STIH416
 	bool "STiH416 STMicroelectronics Consumer Electronics family"
 	default y
+	select STIH416_RESET
 	help
 	  This enables support for STMicroelectronics Digital Consumer
 	  Electronics family StiH416 parts, primarily targeted at set-top-box
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index 1217fb598cfd..3cf6ef8d4317 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -14,33 +14,19 @@
 
 #include "smp.h"
 
-void __init stih41x_l2x0_init(void)
-{
-	u32 way_size = 0x4;
-	u32 aux_ctrl;
-	/* may be this can be encoded in macros like BIT*() */
-	aux_ctrl = (0x1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) |
-		(0x1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) |
-		(0x1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
-		(way_size << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
-
-	l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
-}
-
-static void __init stih41x_machine_init(void)
-{
-	stih41x_l2x0_init();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char *stih41x_dt_match[] __initdata = {
 	"st,stih415",
 	"st,stih416",
+	"st,stih407",
 	NULL
 };
 
 DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
-	.init_machine	= stih41x_machine_init,
-	.smp		= smp_ops(sti_smp_ops),
 	.dt_compat	= stih41x_dt_match,
+	.l2c_aux_val	= L2C_AUX_CTRL_SHARED_OVERRIDE |
+			  L310_AUX_CTRL_DATA_PREFETCH |
+			  L310_AUX_CTRL_INSTR_PREFETCH |
+			  L2C_AUX_CTRL_WAY_SIZE(4),
+	.l2c_aux_mask	= 0xc0000fff,
+	.smp		= smp_ops(sti_smp_ops),
 MACHINE_END
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index b9d6cad8669b..0fbd4f156bfa 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,18 +1,38 @@
-config ARCH_SUNXI
-	bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
-	select ARCH_HAS_RESET_CONTROLLER
+menuconfig ARCH_SUNXI
+	bool "Allwinner SoCs" if ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
-	select ARM_GIC
-	select ARM_PSCI
 	select CLKSRC_MMIO
-	select CLKSRC_OF
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select HAVE_SMP
 	select PINCTRL
 	select PINCTRL_SUNXI
-	select RESET_CONTROLLER
-	select SPARSE_IRQ
 	select SUN4I_TIMER
+
+if ARCH_SUNXI
+
+config MACH_SUN4I
+	bool "Allwinner A10 (sun4i) SoCs support"
+	default ARCH_SUNXI
+
+config MACH_SUN5I
+	bool "Allwinner A10s / A13 (sun5i) SoCs support"
+	default ARCH_SUNXI
+	select SUN5I_HSTIMER
+
+config MACH_SUN6I
+	bool "Allwinner A31 (sun6i) SoCs support"
+	default ARCH_SUNXI
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_GIC
+	select MFD_SUN6I_PRCM
+	select RESET_CONTROLLER
+	select SUN5I_HSTIMER
+
+config MACH_SUN7I
+	bool "Allwinner A20 (sun7i) SoCs support"
+	default ARCH_SUNXI
+	select ARM_GIC
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
 	select SUN5I_HSTIMER
+
+endif
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index d9397202d6ec..27b168f121a1 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -1,2 +1,2 @@
 obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-sunxi/common.h b/arch/arm/mach-sunxi/common.h
deleted file mode 100644
index 9e5ac4756cbb..000000000000
--- a/arch/arm/mach-sunxi/common.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Core functions for Allwinner SoCs
- *
- * Copyright (C) 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_SUNXI_COMMON_H_
-#define __ARCH_SUNXI_COMMON_H_
-
-void sun6i_secondary_startup(void);
-extern struct smp_operations sun6i_smp_ops;
-
-#endif /* __ARCH_SUNXI_COMMON_H_ */
diff --git a/arch/arm/mach-sunxi/headsmp.S b/arch/arm/mach-sunxi/headsmp.S
deleted file mode 100644
index a10d494fb37b..000000000000
--- a/arch/arm/mach-sunxi/headsmp.S
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-        .section ".text.head", "ax"
-
-ENTRY(sun6i_secondary_startup)
-	msr	cpsr_fsxc, #0xd3
-	b	secondary_startup
-ENDPROC(sun6i_secondary_startup)
diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c
index 7b141d8342a1..c53077bb8c3f 100644
--- a/arch/arm/mach-sunxi/platsmp.c
+++ b/arch/arm/mach-sunxi/platsmp.c
@@ -21,8 +21,6 @@
 #include <linux/of_address.h>
 #include <linux/smp.h>
 
-#include "common.h"
-
 #define CPUCFG_CPU_PWR_CLAMP_STATUS_REG(cpu)	((cpu) * 0x40 + 0x64)
 #define CPUCFG_CPU_RST_CTRL_REG(cpu)		(((cpu) + 1) * 0x40)
 #define CPUCFG_CPU_CTRL_REG(cpu)		(((cpu) + 1) * 0x40 + 0x04)
@@ -82,7 +80,7 @@ static int sun6i_smp_boot_secondary(unsigned int cpu,
 	spin_lock(&cpu_lock);
 
 	/* Set CPU boot address */
-	writel(virt_to_phys(sun6i_secondary_startup),
+	writel(virt_to_phys(secondary_startup),
 	       cpucfg_membase + CPUCFG_PRIVATE0_REG);
 
 	/* Assert the CPU core in reset */
@@ -122,3 +120,4 @@ struct smp_operations sun6i_smp_ops __initdata = {
 	.smp_prepare_cpus	= sun6i_smp_prepare_cpus,
 	.smp_boot_secondary	= sun6i_smp_boot_secondary,
 };
+CPU_METHOD_OF_DECLARE(sun6i_smp, "allwinner,sun6i-a31", &sun6i_smp_ops);
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index aeea6ceea725..3f9587bb51f6 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -12,111 +12,8 @@
 
 #include <linux/clk-provider.h>
 #include <linux/clocksource.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-
-#include "common.h"
-
-#define SUN4I_WATCHDOG_CTRL_REG		0x00
-#define SUN4I_WATCHDOG_CTRL_RESTART		BIT(0)
-#define SUN4I_WATCHDOG_MODE_REG		0x04
-#define SUN4I_WATCHDOG_MODE_ENABLE		BIT(0)
-#define SUN4I_WATCHDOG_MODE_RESET_ENABLE	BIT(1)
-
-#define SUN6I_WATCHDOG1_IRQ_REG		0x00
-#define SUN6I_WATCHDOG1_CTRL_REG	0x10
-#define SUN6I_WATCHDOG1_CTRL_RESTART		BIT(0)
-#define SUN6I_WATCHDOG1_CONFIG_REG	0x14
-#define SUN6I_WATCHDOG1_CONFIG_RESTART		BIT(0)
-#define SUN6I_WATCHDOG1_CONFIG_IRQ		BIT(1)
-#define SUN6I_WATCHDOG1_MODE_REG	0x18
-#define SUN6I_WATCHDOG1_MODE_ENABLE		BIT(0)
-
-static void __iomem *wdt_base;
-
-static void sun4i_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (!wdt_base)
-		return;
-
-	/* Enable timer and set reset bit in the watchdog */
-	writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
-	       wdt_base + SUN4I_WATCHDOG_MODE_REG);
-
-	/*
-	 * Restart the watchdog. The default (and lowest) interval
-	 * value for the watchdog is 0.5s.
-	 */
-	writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG);
-
-	while (1) {
-		mdelay(5);
-		writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
-		       wdt_base + SUN4I_WATCHDOG_MODE_REG);
-	}
-}
-
-static void sun6i_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (!wdt_base)
-		return;
-
-	/* Disable interrupts */
-	writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG);
-
-	/* We want to disable the IRQ and just reset the whole system */
-	writel(SUN6I_WATCHDOG1_CONFIG_RESTART,
-		wdt_base + SUN6I_WATCHDOG1_CONFIG_REG);
-
-	/* Enable timer. The default and lowest interval value is 0.5s */
-	writel(SUN6I_WATCHDOG1_MODE_ENABLE,
-		wdt_base + SUN6I_WATCHDOG1_MODE_REG);
-
-	/* Restart the watchdog. */
-	writel(SUN6I_WATCHDOG1_CTRL_RESTART,
-		wdt_base + SUN6I_WATCHDOG1_CTRL_REG);
-
-	while (1) {
-		mdelay(5);
-		writel(SUN6I_WATCHDOG1_MODE_ENABLE,
-			wdt_base + SUN6I_WATCHDOG1_MODE_REG);
-	}
-}
-
-static struct of_device_id sunxi_restart_ids[] = {
-	{ .compatible = "allwinner,sun4i-wdt" },
-	{ .compatible = "allwinner,sun6i-wdt" },
-	{ /*sentinel*/ }
-};
-
-static void sunxi_setup_restart(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, sunxi_restart_ids);
-	if (WARN(!np, "unable to setup watchdog restart"))
-		return;
-
-	wdt_base = of_iomap(np, 0);
-	WARN(!wdt_base, "failed to map watchdog base address");
-}
-
-static void __init sunxi_dt_init(void)
-{
-	sunxi_setup_restart();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
 
 static const char * const sunxi_board_dt_compat[] = {
 	"allwinner,sun4i-a10",
@@ -126,9 +23,7 @@ static const char * const sunxi_board_dt_compat[] = {
 };
 
 DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
-	.init_machine	= sunxi_dt_init,
 	.dt_compat	= sunxi_board_dt_compat,
-	.restart	= sun4i_restart,
 MACHINE_END
 
 static const char * const sun6i_board_dt_compat[] = {
@@ -140,16 +35,14 @@ extern void __init sun6i_reset_init(void);
 static void __init sun6i_timer_init(void)
 {
 	of_clk_init(NULL);
-	sun6i_reset_init();
+	if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
+		sun6i_reset_init();
 	clocksource_of_init();
 }
 
 DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")
-	.init_machine	= sunxi_dt_init,
 	.init_time	= sun6i_timer_init,
 	.dt_compat	= sun6i_board_dt_compat,
-	.restart	= sun6i_restart,
-	.smp		= smp_ops(sun6i_smp_ops),
 MACHINE_END
 
 static const char * const sun7i_board_dt_compat[] = {
@@ -158,7 +51,5 @@ static const char * const sun7i_board_dt_compat[] = {
 };
 
 DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
-	.init_machine	= sunxi_dt_init,
 	.dt_compat	= sun7i_board_dt_compat,
-	.restart	= sun4i_restart,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index b1232d8be6f5..e16999e5b735 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -5,24 +5,14 @@ config ARCH_TEGRA
 	select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
 	select ARM_GIC
 	select CLKSRC_MMIO
-	select CLKSRC_OF
-	select COMMON_CLK
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	select MIGHT_HAVE_PCI
 	select PINCTRL
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
 	select SOC_BUS
-	select SPARSE_IRQ
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select USB_ULPI if USB_PHY
 	select USB_ULPI_VIEWPORT if USB_PHY
-	select USE_OF
 	help
 	  This enables support for NVIDIA Tegra based systems.
 
@@ -79,7 +69,4 @@ config TEGRA_AHB
 	  which controls AHB bus master arbitration and some
 	  performance parameters(priority, prefech size).
 
-config TEGRA_EMC_SCALING_ENABLE
-	bool "Enable scaling the memory frequency"
-
 endmenu
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 019bb1758662..6fbfbb77dcd9 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -14,7 +14,6 @@ obj-y					+= sleep.o
 obj-y					+= tegra.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra20_speedo.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra2_emc.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= sleep-tegra20.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pm-tegra20.o
 ifeq ($(CONFIG_CPU_IDLE),y)
diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
index e0b87300243d..b5fb7c110c64 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra114.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra114.c
@@ -19,6 +19,7 @@
 #include <linux/cpuidle.h>
 #include <linux/cpu_pm.h>
 #include <linux/clockchips.h>
+#include <asm/firmware.h>
 
 #include <asm/cpuidle.h>
 #include <asm/suspend.h>
@@ -45,7 +46,11 @@ static int tegra114_idle_power_down(struct cpuidle_device *dev,
 
 	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu);
 
-	cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
+	call_firmware_op(prepare_idle);
+
+	/* Do suspend by ourselves if the firmware does not implement it */
+	if (call_firmware_op(do_idle) == -ENOSYS)
+		cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
 
 	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
 
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index eb72ae709124..929d1046e2b4 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -114,7 +114,7 @@ static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 		/* Wait for the power to come up. */
 		timeout = jiffies + msecs_to_jiffies(100);
-		while (tegra_pmc_cpu_is_powered(cpu)) {
+		while (!tegra_pmc_cpu_is_powered(cpu)) {
 			if (time_after(jiffies, timeout))
 				return -ETIMEDOUT;
 			udelay(10);
diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h
index 6e92a7c2ecbd..f4a89698e5b0 100644
--- a/arch/arm/mach-tegra/pm.h
+++ b/arch/arm/mach-tegra/pm.h
@@ -35,8 +35,6 @@ void tegra20_sleep_core_init(void);
 void tegra30_lp1_iram_hook(void);
 void tegra30_sleep_core_init(void);
 
-extern unsigned long l2x0_saved_regs_addr;
-
 void tegra_clear_cpu_in_lp2(void);
 bool tegra_set_cpu_in_lp2(void);
 
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
index fb7920201ab4..7c7123e7557b 100644
--- a/arch/arm/mach-tegra/pmc.c
+++ b/arch/arm/mach-tegra/pmc.c
@@ -41,6 +41,14 @@
 #define PMC_REMOVE_CLAMPING		0x34
 #define PMC_PWRGATE_STATUS		0x38
 
+#define PMC_SCRATCH0			0x50
+#define PMC_SCRATCH0_MODE_RECOVERY	(1 << 31)
+#define PMC_SCRATCH0_MODE_BOOTLOADER	(1 << 30)
+#define PMC_SCRATCH0_MODE_RCM		(1 << 1)
+#define PMC_SCRATCH0_MODE_MASK		(PMC_SCRATCH0_MODE_RECOVERY | \
+					 PMC_SCRATCH0_MODE_BOOTLOADER | \
+					 PMC_SCRATCH0_MODE_RCM)
+
 #define PMC_CPUPWRGOOD_TIMER	0xc8
 #define PMC_CPUPWROFF_TIMER	0xcc
 
@@ -165,6 +173,22 @@ void tegra_pmc_restart(enum reboot_mode mode, const char *cmd)
 {
 	u32 val;
 
+	val = tegra_pmc_readl(PMC_SCRATCH0);
+	val &= ~PMC_SCRATCH0_MODE_MASK;
+
+	if (cmd) {
+		if (strcmp(cmd, "recovery") == 0)
+			val |= PMC_SCRATCH0_MODE_RECOVERY;
+
+		if (strcmp(cmd, "bootloader") == 0)
+			val |= PMC_SCRATCH0_MODE_BOOTLOADER;
+
+		if (strcmp(cmd, "forced-recovery") == 0)
+			val |= PMC_SCRATCH0_MODE_RCM;
+	}
+
+	tegra_pmc_writel(val, PMC_SCRATCH0);
+
 	val = tegra_pmc_readl(0);
 	val |= 0x10;
 	tegra_pmc_writel(val, 0);
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index 3d0c537d9b94..4cefc5cd6bed 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -484,6 +484,7 @@ int tegra_io_rail_power_on(int id)
 
 	return 0;
 }
+EXPORT_SYMBOL(tegra_io_rail_power_on);
 
 int tegra_io_rail_power_off(int id)
 {
@@ -511,3 +512,4 @@ int tegra_io_rail_power_off(int id)
 
 	return 0;
 }
+EXPORT_SYMBOL(tegra_io_rail_power_off);
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index 8c1ba4fea384..578d4d1ad648 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -19,7 +19,6 @@
 
 #include <asm/cache.h>
 #include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
 
 #include "flowctrl.h"
 #include "fuse.h"
@@ -78,8 +77,10 @@ ENTRY(tegra_resume)
 	str	r1, [r0]
 #endif
 
+#ifdef CONFIG_CACHE_L2X0
 	/* L2 cache resume & re-enable */
-	l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr
+	bl	l2c310_early_resume
+#endif
 end_ca9_scu_l2_resume:
 	mov32	r9, 0xc0f
 	cmp	r8, r9
@@ -89,12 +90,6 @@ end_ca9_scu_l2_resume:
 ENDPROC(tegra_resume)
 #endif
 
-#ifdef CONFIG_CACHE_L2X0
-	.globl	l2x0_saved_regs_addr
-l2x0_saved_regs_addr:
-	.long	0
-#endif
-
 	.align L1_CACHE_SHIFT
 ENTRY(__tegra_cpu_reset_handler_start)
 
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index a4edbb3abd3d..339fe42cd6fb 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -120,37 +120,6 @@
 	mov	\tmp1, \tmp1, lsr #8
 .endm
 
-/* Macro to resume & re-enable L2 cache */
-#ifndef L2X0_CTRL_EN
-#define L2X0_CTRL_EN	1
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
-.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs
-	W(adr)	\tmp1, \phys_l2x0_saved_regs
-	ldr	\tmp1, [\tmp1]
-	ldr	\tmp2, [\tmp1, #L2X0_R_PHY_BASE]
-	ldr	\tmp3, [\tmp2, #L2X0_CTRL]
-	tst	\tmp3, #L2X0_CTRL_EN
-	bne	exit_l2_resume
-	ldr	\tmp3, [\tmp1, #L2X0_R_TAG_LATENCY]
-	str	\tmp3, [\tmp2, #L2X0_TAG_LATENCY_CTRL]
-	ldr	\tmp3, [\tmp1, #L2X0_R_DATA_LATENCY]
-	str	\tmp3, [\tmp2, #L2X0_DATA_LATENCY_CTRL]
-	ldr	\tmp3, [\tmp1, #L2X0_R_PREFETCH_CTRL]
-	str	\tmp3, [\tmp2, #L2X0_PREFETCH_CTRL]
-	ldr	\tmp3, [\tmp1, #L2X0_R_PWR_CTRL]
-	str	\tmp3, [\tmp2, #L2X0_POWER_CTRL]
-	ldr	\tmp3, [\tmp1, #L2X0_R_AUX_CTRL]
-	str	\tmp3, [\tmp2, #L2X0_AUX_CTRL]
-	mov	\tmp3, #L2X0_CTRL_EN
-	str	\tmp3, [\tmp2, #L2X0_CTRL]
-exit_l2_resume:
-.endm
-#else /* CONFIG_CACHE_L2X0 */
-.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs
-.endm
-#endif /* CONFIG_CACHE_L2X0 */
 #else
 void tegra_pen_lock(void);
 void tegra_pen_unlock(void);
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 6191603379e1..15ac9fcc96b1 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -70,40 +70,12 @@ u32 tegra_uart_config[3] = {
 	0,
 };
 
-static void __init tegra_init_cache(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	static const struct of_device_id pl310_ids[] __initconst = {
-		{ .compatible = "arm,pl310-cache",  },
-		{}
-	};
-
-	struct device_node *np;
-	int ret;
-	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
-	u32 aux_ctrl, cache_type;
-
-	np = of_find_matching_node(NULL, pl310_ids);
-	if (!np)
-		return;
-
-	cache_type = readl(p + L2X0_CACHE_TYPE);
-	aux_ctrl = (cache_type & 0x700) << (17-8);
-	aux_ctrl |= 0x7C400001;
-
-	ret = l2x0_of_init(aux_ctrl, 0x8200c3fe);
-	if (!ret)
-		l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs);
-#endif
-}
-
 static void __init tegra_init_early(void)
 {
 	of_register_trusted_foundations();
 	tegra_apb_io_init();
 	tegra_init_fuse();
 	tegra_cpu_reset_handler_init();
-	tegra_init_cache();
 	tegra_powergate_init();
 	tegra_hotplug_init();
 }
@@ -191,8 +163,10 @@ static const char * const tegra_dt_board_compat[] = {
 };
 
 DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)")
-	.map_io		= tegra_map_common_io,
+	.l2c_aux_val	= 0x3c400001,
+	.l2c_aux_mask	= 0xc20fc3fe,
 	.smp		= smp_ops(tegra_smp_ops),
+	.map_io		= tegra_map_common_io,
 	.init_early	= tegra_init_early,
 	.init_irq	= tegra_dt_init_irq,
 	.init_machine	= tegra_dt_init,
diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c
deleted file mode 100644
index 3ae4a7f1a2fb..000000000000
--- a/arch/arm/mach-tegra/tegra2_emc.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * Copyright (C) 2011 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/tegra_emc.h>
-
-#include "tegra2_emc.h"
-#include "fuse.h"
-
-#ifdef CONFIG_TEGRA_EMC_SCALING_ENABLE
-static bool emc_enable = true;
-#else
-static bool emc_enable;
-#endif
-module_param(emc_enable, bool, 0644);
-
-static struct platform_device *emc_pdev;
-static void __iomem *emc_regbase;
-
-static inline void emc_writel(u32 val, unsigned long addr)
-{
-	writel(val, emc_regbase + addr);
-}
-
-static inline u32 emc_readl(unsigned long addr)
-{
-	return readl(emc_regbase + addr);
-}
-
-static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = {
-	0x2c,	/* RC */
-	0x30,	/* RFC */
-	0x34,	/* RAS */
-	0x38,	/* RP */
-	0x3c,	/* R2W */
-	0x40,	/* W2R */
-	0x44,	/* R2P */
-	0x48,	/* W2P */
-	0x4c,	/* RD_RCD */
-	0x50,	/* WR_RCD */
-	0x54,	/* RRD */
-	0x58,	/* REXT */
-	0x5c,	/* WDV */
-	0x60,	/* QUSE */
-	0x64,	/* QRST */
-	0x68,	/* QSAFE */
-	0x6c,	/* RDV */
-	0x70,	/* REFRESH */
-	0x74,	/* BURST_REFRESH_NUM */
-	0x78,	/* PDEX2WR */
-	0x7c,	/* PDEX2RD */
-	0x80,	/* PCHG2PDEN */
-	0x84,	/* ACT2PDEN */
-	0x88,	/* AR2PDEN */
-	0x8c,	/* RW2PDEN */
-	0x90,	/* TXSR */
-	0x94,	/* TCKE */
-	0x98,	/* TFAW */
-	0x9c,	/* TRPAB */
-	0xa0,	/* TCLKSTABLE */
-	0xa4,	/* TCLKSTOP */
-	0xa8,	/* TREFBW */
-	0xac,	/* QUSE_EXTRA */
-	0x114,	/* FBIO_CFG6 */
-	0xb0,	/* ODT_WRITE */
-	0xb4,	/* ODT_READ */
-	0x104,	/* FBIO_CFG5 */
-	0x2bc,	/* CFG_DIG_DLL */
-	0x2c0,	/* DLL_XFORM_DQS */
-	0x2c4,	/* DLL_XFORM_QUSE */
-	0x2e0,	/* ZCAL_REF_CNT */
-	0x2e4,	/* ZCAL_WAIT_CNT */
-	0x2a8,	/* AUTO_CAL_INTERVAL */
-	0x2d0,	/* CFG_CLKTRIM_0 */
-	0x2d4,	/* CFG_CLKTRIM_1 */
-	0x2d8,	/* CFG_CLKTRIM_2 */
-};
-
-/* Select the closest EMC rate that is higher than the requested rate */
-long tegra_emc_round_rate(unsigned long rate)
-{
-	struct tegra_emc_pdata *pdata;
-	int i;
-	int best = -1;
-	unsigned long distance = ULONG_MAX;
-
-	if (!emc_pdev)
-		return -EINVAL;
-
-	pdata = emc_pdev->dev.platform_data;
-
-	pr_debug("%s: %lu\n", __func__, rate);
-
-	/*
-	 * The EMC clock rate is twice the bus rate, and the bus rate is
-	 * measured in kHz
-	 */
-	rate = rate / 2 / 1000;
-
-	for (i = 0; i < pdata->num_tables; i++) {
-		if (pdata->tables[i].rate >= rate &&
-		    (pdata->tables[i].rate - rate) < distance) {
-			distance = pdata->tables[i].rate - rate;
-			best = i;
-		}
-	}
-
-	if (best < 0)
-		return -EINVAL;
-
-	pr_debug("%s: using %lu\n", __func__, pdata->tables[best].rate);
-
-	return pdata->tables[best].rate * 2 * 1000;
-}
-
-/*
- * The EMC registers have shadow registers.  When the EMC clock is updated
- * in the clock controller, the shadow registers are copied to the active
- * registers, allowing glitchless memory bus frequency changes.
- * This function updates the shadow registers for a new clock frequency,
- * and relies on the clock lock on the emc clock to avoid races between
- * multiple frequency changes
- */
-int tegra_emc_set_rate(unsigned long rate)
-{
-	struct tegra_emc_pdata *pdata;
-	int i;
-	int j;
-
-	if (!emc_pdev)
-		return -EINVAL;
-
-	pdata = emc_pdev->dev.platform_data;
-
-	/*
-	 * The EMC clock rate is twice the bus rate, and the bus rate is
-	 * measured in kHz
-	 */
-	rate = rate / 2 / 1000;
-
-	for (i = 0; i < pdata->num_tables; i++)
-		if (pdata->tables[i].rate == rate)
-			break;
-
-	if (i >= pdata->num_tables)
-		return -EINVAL;
-
-	pr_debug("%s: setting to %lu\n", __func__, rate);
-
-	for (j = 0; j < TEGRA_EMC_NUM_REGS; j++)
-		emc_writel(pdata->tables[i].regs[j], emc_reg_addr[j]);
-
-	emc_readl(pdata->tables[i].regs[TEGRA_EMC_NUM_REGS - 1]);
-
-	return 0;
-}
-
-#ifdef CONFIG_OF
-static struct device_node *tegra_emc_ramcode_devnode(struct device_node *np)
-{
-	struct device_node *iter;
-	u32 reg;
-
-	for_each_child_of_node(np, iter) {
-		if (of_property_read_u32(iter, "nvidia,ram-code", &reg))
-			continue;
-		if (reg == tegra_bct_strapping)
-			return of_node_get(iter);
-	}
-
-	return NULL;
-}
-
-static struct tegra_emc_pdata *tegra_emc_dt_parse_pdata(
-		struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	struct device_node *tnp, *iter;
-	struct tegra_emc_pdata *pdata;
-	int ret, i, num_tables;
-
-	if (!np)
-		return NULL;
-
-	if (of_find_property(np, "nvidia,use-ram-code", NULL)) {
-		tnp = tegra_emc_ramcode_devnode(np);
-		if (!tnp)
-			dev_warn(&pdev->dev,
-				 "can't find emc table for ram-code 0x%02x\n",
-				 tegra_bct_strapping);
-	} else
-		tnp = of_node_get(np);
-
-	if (!tnp)
-		return NULL;
-
-	num_tables = 0;
-	for_each_child_of_node(tnp, iter)
-		if (of_device_is_compatible(iter, "nvidia,tegra20-emc-table"))
-			num_tables++;
-
-	if (!num_tables) {
-		pdata = NULL;
-		goto out;
-	}
-
-	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-	pdata->tables = devm_kzalloc(&pdev->dev,
-				     sizeof(*pdata->tables) * num_tables,
-				     GFP_KERNEL);
-
-	i = 0;
-	for_each_child_of_node(tnp, iter) {
-		u32 prop;
-
-		ret = of_property_read_u32(iter, "clock-frequency", &prop);
-		if (ret) {
-			dev_err(&pdev->dev, "no clock-frequency in %s\n",
-				iter->full_name);
-			continue;
-		}
-		pdata->tables[i].rate = prop;
-
-		ret = of_property_read_u32_array(iter, "nvidia,emc-registers",
-						 pdata->tables[i].regs,
-						 TEGRA_EMC_NUM_REGS);
-		if (ret) {
-			dev_err(&pdev->dev,
-				"malformed emc-registers property in %s\n",
-				iter->full_name);
-			continue;
-		}
-
-		i++;
-	}
-	pdata->num_tables = i;
-
-out:
-	of_node_put(tnp);
-	return pdata;
-}
-#else
-static struct tegra_emc_pdata *tegra_emc_dt_parse_pdata(
-		struct platform_device *pdev)
-{
-	return NULL;
-}
-#endif
-
-static struct tegra_emc_pdata *tegra_emc_fill_pdata(struct platform_device *pdev)
-{
-	struct clk *c = clk_get_sys(NULL, "emc");
-	struct tegra_emc_pdata *pdata;
-	unsigned long khz;
-	int i;
-
-	WARN_ON(pdev->dev.platform_data);
-	BUG_ON(IS_ERR(c));
-
-	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-	pdata->tables = devm_kzalloc(&pdev->dev, sizeof(*pdata->tables),
-				     GFP_KERNEL);
-
-	pdata->tables[0].rate = clk_get_rate(c) / 2 / 1000;
-
-	for (i = 0; i < TEGRA_EMC_NUM_REGS; i++)
-		pdata->tables[0].regs[i] = emc_readl(emc_reg_addr[i]);
-
-	pdata->num_tables = 1;
-
-	khz = pdata->tables[0].rate;
-	dev_info(&pdev->dev, "no tables provided, using %ld kHz emc, "
-		 "%ld kHz mem\n", khz * 2, khz);
-
-	return pdata;
-}
-
-static int tegra_emc_probe(struct platform_device *pdev)
-{
-	struct tegra_emc_pdata *pdata;
-	struct resource *res;
-
-	if (!emc_enable) {
-		dev_err(&pdev->dev, "disabled per module parameter\n");
-		return -ENODEV;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	emc_regbase = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(emc_regbase))
-		return PTR_ERR(emc_regbase);
-
-	pdata = pdev->dev.platform_data;
-
-	if (!pdata)
-		pdata = tegra_emc_dt_parse_pdata(pdev);
-
-	if (!pdata)
-		pdata = tegra_emc_fill_pdata(pdev);
-
-	pdev->dev.platform_data = pdata;
-
-	emc_pdev = pdev;
-
-	return 0;
-}
-
-static struct of_device_id tegra_emc_of_match[] = {
-	{ .compatible = "nvidia,tegra20-emc", },
-	{ },
-};
-
-static struct platform_driver tegra_emc_driver = {
-	.driver         = {
-		.name   = "tegra-emc",
-		.owner  = THIS_MODULE,
-		.of_match_table = tegra_emc_of_match,
-	},
-	.probe          = tegra_emc_probe,
-};
-
-static int __init tegra_emc_init(void)
-{
-	return platform_driver_register(&tegra_emc_driver);
-}
-device_initcall(tegra_emc_init);
diff --git a/arch/arm/mach-tegra/tegra2_emc.h b/arch/arm/mach-tegra/tegra2_emc.h
deleted file mode 100644
index f61409b54cb7..000000000000
--- a/arch/arm/mach-tegra/tegra2_emc.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2011 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_TEGRA2_EMC_H_
-#define __MACH_TEGRA_TEGRA2_EMC_H
-
-int tegra_emc_set_rate(unsigned long rate);
-long tegra_emc_round_rate(unsigned long rate);
-
-#endif
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 8e23071bd1b3..e3a96d7302e9 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -3,20 +3,14 @@ config ARCH_U300
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
-	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
 	select CLKSRC_MMIO
-	select CLKSRC_OF
-	select COMMON_CLK
 	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
 	select HAVE_TCM
 	select PINCTRL
 	select PINCTRL_COH901
 	select PINCTRL_U300
-	select SPARSE_IRQ
 	select MFD_SYSCON
-	select USE_OF
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 0f362b64fb87..3ec74ac95bc1 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel, U300 machine.
 #
 
-obj-y		:= core.o timer.o
+obj-y		:= core.o
 obj-m		:=
 obj-n		:=
 obj-		:=
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
deleted file mode 100644
index fe08fd34c0ce..000000000000
--- a/arch/arm/mach-u300/timer.c
+++ /dev/null
@@ -1,451 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/timer.c
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Timer COH 901 328, runs the OS timer interrupt.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/sched_clock.h>
-
-/* Generic stuff */
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-/*
- * APP side special timer registers
- * This timer contains four timers which can fire an interrupt each.
- * OS (operating system) timer @ 32768 Hz
- * DD (device driver) timer @ 1 kHz
- * GP1 (general purpose 1) timer @ 1MHz
- * GP2 (general purpose 2) timer @ 1MHz
- */
-
-/* Reset OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_ROST					(0x0000)
-#define U300_TIMER_APP_ROST_TIMER_RESET				(0x00000000)
-/* Enable OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_EOST					(0x0004)
-#define U300_TIMER_APP_EOST_TIMER_ENABLE			(0x00000000)
-/* Disable OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_DOST					(0x0008)
-#define U300_TIMER_APP_DOST_TIMER_DISABLE			(0x00000000)
-/* OS Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SOSTM					(0x000c)
-#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT			(0x00000001)
-/* OS Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_OSTS					(0x0010)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_OSTS_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_OSTS_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND			(0x00000080)
-/* OS Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_OSTCC					(0x0014)
-/* OS Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_OSTTC					(0x0018)
-/* OS Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_OSTIE					(0x001c)
-#define U300_TIMER_APP_OSTIE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_OSTIE_IRQ_ENABLE				(0x00000001)
-/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_OSTIA					(0x0020)
-#define U300_TIMER_APP_OSTIA_IRQ_ACK				(0x00000080)
-
-/* Reset DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_RDDT					(0x0040)
-#define U300_TIMER_APP_RDDT_TIMER_RESET				(0x00000000)
-/* Enable DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_EDDT					(0x0044)
-#define U300_TIMER_APP_EDDT_TIMER_ENABLE			(0x00000000)
-/* Disable DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_DDDT					(0x0048)
-#define U300_TIMER_APP_DDDT_TIMER_DISABLE			(0x00000000)
-/* DD Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SDDTM					(0x004c)
-#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT			(0x00000001)
-/* DD Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_DDTS					(0x0050)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_DDTS_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_DDTS_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND			(0x00000080)
-/* DD Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_DDTCC					(0x0054)
-/* DD Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_DDTTC					(0x0058)
-/* DD Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_DDTIE					(0x005c)
-#define U300_TIMER_APP_DDTIE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_DDTIE_IRQ_ENABLE				(0x00000001)
-/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_DDTIA					(0x0060)
-#define U300_TIMER_APP_DDTIA_IRQ_ACK				(0x00000080)
-
-/* Reset GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_RGPT1					(0x0080)
-#define U300_TIMER_APP_RGPT1_TIMER_RESET			(0x00000000)
-/* Enable GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_EGPT1					(0x0084)
-#define U300_TIMER_APP_EGPT1_TIMER_ENABLE			(0x00000000)
-/* Disable GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_DGPT1					(0x0088)
-#define U300_TIMER_APP_DGPT1_TIMER_DISABLE			(0x00000000)
-/* GP1 Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SGPT1M					(0x008c)
-#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT			(0x00000001)
-/* GP1 Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT1S					(0x0090)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_GPT1S_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_GPT1S_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND			(0x00000080)
-/* GP1 Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT1CC					(0x0094)
-/* GP1 Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_GPT1TC					(0x0098)
-/* GP1 Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT1IE					(0x009c)
-#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE			(0x00000001)
-/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT1IA					(0x00a0)
-#define U300_TIMER_APP_GPT1IA_IRQ_ACK				(0x00000080)
-
-/* Reset GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_RGPT2					(0x00c0)
-#define U300_TIMER_APP_RGPT2_TIMER_RESET			(0x00000000)
-/* Enable GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_EGPT2					(0x00c4)
-#define U300_TIMER_APP_EGPT2_TIMER_ENABLE			(0x00000000)
-/* Disable GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_DGPT2					(0x00c8)
-#define U300_TIMER_APP_DGPT2_TIMER_DISABLE			(0x00000000)
-/* GP2 Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SGPT2M					(0x00cc)
-#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT			(0x00000001)
-/* GP2 Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT2S					(0x00d0)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_GPT2S_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_GPT2S_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND			(0x00000080)
-/* GP2 Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT2CC					(0x00d4)
-/* GP2 Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_GPT2TC					(0x00d8)
-/* GP2 Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT2IE					(0x00dc)
-#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE			(0x00000001)
-/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT2IA					(0x00e0)
-#define U300_TIMER_APP_GPT2IA_IRQ_ACK				(0x00000080)
-
-/* Clock request control register - all four timers */
-#define U300_TIMER_APP_CRC					(0x100)
-#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE			(0x00000001)
-
-static void __iomem *u300_timer_base;
-
-struct u300_clockevent_data {
-	struct clock_event_device cevd;
-	unsigned ticks_per_jiffy;
-};
-
-/*
- * The u300_set_mode() function is always called first, if we
- * have oneshot timer active, the oneshot scheduling function
- * u300_set_next_event() is called immediately after.
- */
-static void u300_set_mode(enum clock_event_mode mode,
-			  struct clock_event_device *evt)
-{
-	struct u300_clockevent_data *cevdata =
-		container_of(evt, struct u300_clockevent_data, cevd);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* Disable interrupts on GPT1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 while we're reprogramming it. */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_DGPT1);
-		/*
-		 * Set the periodic mode to a certain number of ticks per
-		 * jiffy.
-		 */
-		writel(cevdata->ticks_per_jiffy,
-		       u300_timer_base + U300_TIMER_APP_GPT1TC);
-		/*
-		 * Set continuous mode, so the timer keeps triggering
-		 * interrupts.
-		 */
-		writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
-		       u300_timer_base + U300_TIMER_APP_SGPT1M);
-		/* Enable timer interrupts */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Then enable the OS timer again */
-		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_EGPT1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Just break; here? */
-		/*
-		 * The actual event will be programmed by the next event hook,
-		 * so we just set a dummy value somewhere at the end of the
-		 * universe here.
-		 */
-		/* Disable interrupts on GPT1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 while we're reprogramming it. */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_DGPT1);
-		/*
-		 * Expire far in the future, u300_set_next_event() will be
-		 * called soon...
-		 */
-		writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
-		/* We run one shot per tick here! */
-		writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
-		       u300_timer_base + U300_TIMER_APP_SGPT1M);
-		/* Enable interrupts for this timer */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Enable timer */
-		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_EGPT1);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* Disable interrupts on GP1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_DGPT1);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		/* Ignore this call */
-		break;
-	}
-}
-
-/*
- * The app timer in one shot mode obviously has to be reprogrammed
- * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
- * the interrupt disable + timer disable commands with a reset command,
- * it will fail miserably. Apparently (and I found this the hard way)
- * the timer is very sensitive to the instruction order, though you don't
- * get that impression from the data sheet.
- */
-static int u300_set_next_event(unsigned long cycles,
-			       struct clock_event_device *evt)
-
-{
-	/* Disable interrupts on GPT1 */
-	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-	       u300_timer_base + U300_TIMER_APP_GPT1IE);
-	/* Disable GP1 while we're reprogramming it. */
-	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-	       u300_timer_base + U300_TIMER_APP_DGPT1);
-	/* Reset the General Purpose timer 1. */
-	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
-	       u300_timer_base + U300_TIMER_APP_RGPT1);
-	/* IRQ in n * cycles */
-	writel(cycles, u300_timer_base + U300_TIMER_APP_GPT1TC);
-	/*
-	 * We run one shot per tick here! (This is necessary to reconfigure,
-	 * the timer will tilt if you don't!)
-	 */
-	writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
-	       u300_timer_base + U300_TIMER_APP_SGPT1M);
-	/* Enable timer interrupts */
-	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-	       u300_timer_base + U300_TIMER_APP_GPT1IE);
-	/* Then enable the OS timer again */
-	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-	       u300_timer_base + U300_TIMER_APP_EGPT1);
-	return 0;
-}
-
-static struct u300_clockevent_data u300_clockevent_data = {
-	/* Use general purpose timer 1 as clock event */
-	.cevd = {
-		.name		= "GPT1",
-		/* Reasonably fast and accurate clock event */
-		.rating		= 300,
-		.features	= CLOCK_EVT_FEAT_PERIODIC |
-			CLOCK_EVT_FEAT_ONESHOT,
-		.set_next_event	= u300_set_next_event,
-		.set_mode	= u300_set_mode,
-	},
-};
-
-/* Clock event timer interrupt handler */
-static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &u300_clockevent_data.cevd;
-	/* ACK/Clear timer IRQ for the APP GPT1 Timer */
-
-	writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
-		u300_timer_base + U300_TIMER_APP_GPT1IA);
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction u300_timer_irq = {
-	.name		= "U300 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= u300_timer_interrupt,
-};
-
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by OMAP implementation.)
- */
-
-static u64 notrace u300_read_sched_clock(void)
-{
-	return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
-}
-
-static unsigned long u300_read_current_timer(void)
-{
-	return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
-}
-
-static struct delay_timer u300_delay_timer;
-
-/*
- * This sets up the system timers, clock source and clock event.
- */
-static void __init u300_timer_init_of(struct device_node *np)
-{
-	unsigned int irq;
-	struct clk *clk;
-	unsigned long rate;
-
-	u300_timer_base = of_iomap(np, 0);
-	if (!u300_timer_base)
-		panic("could not ioremap system timer\n");
-
-	/* Get the IRQ for the GP1 timer */
-	irq = irq_of_parse_and_map(np, 2);
-	if (!irq)
-		panic("no IRQ for system timer\n");
-
-	pr_info("U300 GP1 timer @ base: %p, IRQ: %u\n", u300_timer_base, irq);
-
-	/* Clock the interrupt controller */
-	clk = of_clk_get(np, 0);
-	BUG_ON(IS_ERR(clk));
-	clk_prepare_enable(clk);
-	rate = clk_get_rate(clk);
-
-	u300_clockevent_data.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
-
-	sched_clock_register(u300_read_sched_clock, 32, rate);
-
-	u300_delay_timer.read_current_timer = &u300_read_current_timer;
-	u300_delay_timer.freq = rate;
-	register_current_timer_delay(&u300_delay_timer);
-
-	/*
-	 * Disable the "OS" and "DD" timers - these are designed for Symbian!
-	 * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
-	 */
-	writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
-		u300_timer_base + U300_TIMER_APP_CRC);
-	writel(U300_TIMER_APP_ROST_TIMER_RESET,
-		u300_timer_base + U300_TIMER_APP_ROST);
-	writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
-		u300_timer_base + U300_TIMER_APP_DOST);
-	writel(U300_TIMER_APP_RDDT_TIMER_RESET,
-		u300_timer_base + U300_TIMER_APP_RDDT);
-	writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
-		u300_timer_base + U300_TIMER_APP_DDDT);
-
-	/* Reset the General Purpose timer 1. */
-	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
-		u300_timer_base + U300_TIMER_APP_RGPT1);
-
-	/* Set up the IRQ handler */
-	setup_irq(irq, &u300_timer_irq);
-
-	/* Reset the General Purpose timer 2 */
-	writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
-		u300_timer_base + U300_TIMER_APP_RGPT2);
-	/* Set this timer to run around forever */
-	writel(0xFFFFFFFFU, u300_timer_base + U300_TIMER_APP_GPT2TC);
-	/* Set continuous mode so it wraps around */
-	writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
-	       u300_timer_base + U300_TIMER_APP_SGPT2M);
-	/* Disable timer interrupts */
-	writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
-		u300_timer_base + U300_TIMER_APP_GPT2IE);
-	/* Then enable the GP2 timer to use as a free running us counter */
-	writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
-		u300_timer_base + U300_TIMER_APP_EGPT2);
-
-	/* Use general purpose timer 2 as clock source */
-	if (clocksource_mmio_init(u300_timer_base + U300_TIMER_APP_GPT2CC,
-			"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
-		pr_err("timer: failed to initialize U300 clock source\n");
-
-	/* Configure and register the clockevent */
-	clockevents_config_and_register(&u300_clockevent_data.cevd, rate,
-					1, 0xffffffff);
-
-	/*
-	 * TODO: init and register the rest of the timers too, they can be
-	 * used by hrtimers!
-	 */
-}
-
-CLOCKSOURCE_OF_DECLARE(u300_timer, "stericsson,u300-apptimer",
-		       u300_timer_init_of);
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 0034d2cd6973..b41a42da1505 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -11,13 +11,8 @@ config ARCH_U8500
 	select ARM_GIC
 	select CACHE_L2X0
 	select CLKSRC_NOMADIK_MTU
-	select COMMON_CLK
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_ABX500
 	select PINCTRL_NOMADIK
@@ -73,11 +68,6 @@ config UX500_AUTO_PLATFORM
 	  a working kernel. If everything else is disabled, this
 	  automatically enables MACH_MOP500.
 
-config MACH_UX500_DT
-	bool "Generic U8500 support using device tree"
-	depends on MACH_MOP500
-	select USE_OF
-
 endmenu
 
 config UX500_DEBUG_UART
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index d05ba759da30..9741de956b3e 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -5,9 +5,7 @@
 obj-y				:= cpu.o id.o timer.o pm.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
-obj-$(CONFIG_MACH_MOP500)	+= board-mop500-sdi.o \
-				board-mop500-regulators.o \
-				board-mop500-pins.o \
+obj-$(CONFIG_MACH_MOP500)	+= board-mop500-regulators.o \
 				board-mop500-audio.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index 9309ad4cbd09..b2a0899e7453 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -9,7 +9,6 @@
 #include <linux/gpio.h>
 #include <linux/platform_data/dma-ste-dma40.h>
 
-#include "irqs.h"
 #include <linux/platform_data/asoc-ux500-msp.h>
 
 #include "ste-dma40-db8500.h"
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
deleted file mode 100644
index f63619b69113..000000000000
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bug.h>
-#include <linux/string.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-
-#include <asm/mach-types.h>
-
-#include "board-mop500.h"
-
-/* These simply sets bias for pins */
-#define BIAS(a,b) static unsigned long a[] = { b }
-
-BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0));
-BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1));
-BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0));
-
-#define AB8500_MUX_HOG(group, func) \
-	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8500.0", group, func)
-#define AB8500_PIN_HOG(pin, conf) \
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8500.0", pin, abx500_##conf)
-
-#define AB8500_MUX_STATE(group, func, dev, state) \
-	PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8500.0", group, func)
-#define AB8500_PIN_STATE(pin, conf, dev, state) \
-	PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8500.0", pin, abx500_##conf)
-
-#define AB8505_MUX_HOG(group, func) \
-	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8505.0", group, func)
-#define AB8505_PIN_HOG(pin, conf) \
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8505.0", pin, abx500_##conf)
-
-#define AB8505_MUX_STATE(group, func, dev, state) \
-	PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8505.0", group, func)
-#define AB8505_PIN_STATE(pin, conf, dev, state) \
-	PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8505.0", pin, abx500_##conf)
-
-static struct pinctrl_map __initdata ab8500_pinmap[] = {
-	/* Sysclkreq2 */
-	AB8500_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.35", PINCTRL_STATE_DEFAULT),
-	AB8500_PIN_STATE("GPIO1_T10", in_nopull, "regulator.35", PINCTRL_STATE_DEFAULT),
-	/* sysclkreq2 disable, mux in gpio configured in input pulldown */
-	AB8500_MUX_STATE("gpio1_a_1", "gpio", "regulator.35", PINCTRL_STATE_SLEEP),
-	AB8500_PIN_STATE("GPIO1_T10", in_pd, "regulator.35", PINCTRL_STATE_SLEEP),
-
-	/* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */
-	AB8500_MUX_HOG("gpio2_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO2_T9", in_pd),
-
-	/* Sysclkreq4 */
-	AB8500_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT),
-	AB8500_PIN_STATE("GPIO3_U9", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT),
-	/* sysclkreq4 disable, mux in gpio configured in input pulldown */
-	AB8500_MUX_STATE("gpio3_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP),
-	AB8500_PIN_STATE("GPIO3_U9", in_pd, "regulator.36", PINCTRL_STATE_SLEEP),
-
-	/* pins 4 is muxed in GPIO, configured in INPUT PULL DOWN */
-	AB8500_MUX_HOG("gpio4_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO4_W2", in_pd),
-
-	/*
-	 * pins 6,7,8 and 9 are muxed in YCBCR0123
-	 * configured in INPUT PULL UP
-	 */
-	AB8500_MUX_HOG("ycbcr0123_d_1", "ycbcr"),
-	AB8500_PIN_HOG("GPIO6_Y18", in_nopull),
-	AB8500_PIN_HOG("GPIO7_AA20", in_nopull),
-	AB8500_PIN_HOG("GPIO8_W18", in_nopull),
-	AB8500_PIN_HOG("GPIO9_AA19", in_nopull),
-
-	/*
-	 * pins 10,11,12 and 13 are muxed in GPIO
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("gpio10_d_1", "gpio"),
-	AB8500_PIN_HOG("GPIO10_U17", in_pd),
-
-	AB8500_MUX_HOG("gpio11_d_1", "gpio"),
-	AB8500_PIN_HOG("GPIO11_AA18", in_pd),
-
-	AB8500_MUX_HOG("gpio12_d_1", "gpio"),
-	AB8500_PIN_HOG("GPIO12_U16", in_pd),
-
-	AB8500_MUX_HOG("gpio13_d_1", "gpio"),
-	AB8500_PIN_HOG("GPIO13_W17", in_pd),
-
-	/*
-	 * pins 14,15 are muxed in PWM1 and PWM2
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("pwmout1_d_1", "pwmout"),
-	AB8500_PIN_HOG("GPIO14_F14", in_pd),
-
-	AB8500_MUX_HOG("pwmout2_d_1", "pwmout"),
-	AB8500_PIN_HOG("GPIO15_B17", in_pd),
-
-	/*
-	 * pins 16 is muxed in GPIO
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("gpio16_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO14_F14", in_pd),
-
-	/*
-	 * pins 17,18,19 and 20 are muxed in AUDIO interface 1
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("adi1_d_1", "adi1"),
-	AB8500_PIN_HOG("GPIO17_P5", in_pd),
-	AB8500_PIN_HOG("GPIO18_R5", in_pd),
-	AB8500_PIN_HOG("GPIO19_U5", in_pd),
-	AB8500_PIN_HOG("GPIO20_T5", in_pd),
-
-	/*
-	 * pins 21,22 and 23 are muxed in USB UICC
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("usbuicc_d_1", "usbuicc"),
-	AB8500_PIN_HOG("GPIO21_H19", in_pd),
-	AB8500_PIN_HOG("GPIO22_G20", in_pd),
-	AB8500_PIN_HOG("GPIO23_G19", in_pd),
-
-	/*
-	 * pins 24,25 are muxed in GPIO
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("gpio24_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO24_T14", in_pd),
-
-	AB8500_MUX_HOG("gpio25_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO25_R16", in_pd),
-
-	/*
-	 * pins 26 is muxed in GPIO
-	 * configured in OUTPUT LOW
-	 */
-	AB8500_MUX_HOG("gpio26_d_1", "gpio"),
-	AB8500_PIN_HOG("GPIO26_M16", out_lo),
-
-	/*
-	 * pins 27,28 are muxed in DMIC12
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("dmic12_d_1", "dmic"),
-	AB8500_PIN_HOG("GPIO27_J6", in_pd),
-	AB8500_PIN_HOG("GPIO28_K6", in_pd),
-
-	/*
-	 * pins 29,30 are muxed in DMIC34
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("dmic34_d_1", "dmic"),
-	AB8500_PIN_HOG("GPIO29_G6", in_pd),
-	AB8500_PIN_HOG("GPIO30_H6", in_pd),
-
-	/*
-	 * pins 31,32 are muxed in DMIC56
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("dmic56_d_1", "dmic"),
-	AB8500_PIN_HOG("GPIO31_F5", in_pd),
-	AB8500_PIN_HOG("GPIO32_G5", in_pd),
-
-	/*
-	 * pins 34 is muxed in EXTCPENA
-	 * configured INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("extcpena_d_1", "extcpena"),
-	AB8500_PIN_HOG("GPIO34_R17", in_pd),
-
-	/*
-	 * pins 35 is muxed in GPIO
-	 * configured in OUTPUT LOW
-	 */
-	AB8500_MUX_HOG("gpio35_d_1", "gpio"),
-	AB8500_PIN_HOG("GPIO35_W15", in_pd),
-
-	/*
-	 * pins 36,37,38 and 39 are muxed in GPIO
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("gpio36_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO36_A17", in_pd),
-
-	AB8500_MUX_HOG("gpio37_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO37_E15", in_pd),
-
-	AB8500_MUX_HOG("gpio38_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO38_C17", in_pd),
-
-	AB8500_MUX_HOG("gpio39_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO39_E16", in_pd),
-
-	/*
-	 * pins 40 and 41 are muxed in MODCSLSDA
-	 * configured INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("modsclsda_d_1", "modsclsda"),
-	AB8500_PIN_HOG("GPIO40_T19", in_pd),
-	AB8500_PIN_HOG("GPIO41_U19", in_pd),
-
-	/*
-	 * pins 42 is muxed in GPIO
-	 * configured INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("gpio42_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO42_U2", in_pd),
-};
-
-static struct pinctrl_map __initdata ab8505_pinmap[] = {
-	/* Sysclkreq2 */
-	AB8505_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT),
-	AB8505_PIN_STATE("GPIO1_N4", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT),
-	/* sysclkreq2 disable, mux in gpio configured in input pulldown */
-	AB8505_MUX_STATE("gpio1_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP),
-	AB8505_PIN_STATE("GPIO1_N4", in_pd, "regulator.36", PINCTRL_STATE_SLEEP),
-
-	/* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */
-	AB8505_MUX_HOG("gpio2_a_1", "gpio"),
-	AB8505_PIN_HOG("GPIO2_R5", in_pd),
-
-	/* Sysclkreq4 */
-	AB8505_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.37", PINCTRL_STATE_DEFAULT),
-	AB8505_PIN_STATE("GPIO3_P5", in_nopull, "regulator.37", PINCTRL_STATE_DEFAULT),
-	/* sysclkreq4 disable, mux in gpio configured in input pulldown */
-	AB8505_MUX_STATE("gpio3_a_1", "gpio", "regulator.37", PINCTRL_STATE_SLEEP),
-	AB8505_PIN_STATE("GPIO3_P5", in_pd, "regulator.37", PINCTRL_STATE_SLEEP),
-
-	AB8505_MUX_HOG("gpio10_d_1", "gpio"),
-	AB8505_PIN_HOG("GPIO10_B16", in_pd),
-
-	AB8505_MUX_HOG("gpio11_d_1", "gpio"),
-	AB8505_PIN_HOG("GPIO11_B17", in_pd),
-
-	AB8505_MUX_HOG("gpio13_d_1", "gpio"),
-	AB8505_PIN_HOG("GPIO13_D17", in_nopull),
-
-	AB8505_MUX_HOG("pwmout1_d_1", "pwmout"),
-	AB8505_PIN_HOG("GPIO14_C16", in_pd),
-
-	AB8505_MUX_HOG("adi2_d_1", "adi2"),
-	AB8505_PIN_HOG("GPIO17_P2", in_pd),
-	AB8505_PIN_HOG("GPIO18_N3", in_pd),
-	AB8505_PIN_HOG("GPIO19_T1", in_pd),
-	AB8505_PIN_HOG("GPIO20_P3", in_pd),
-
-	AB8505_MUX_HOG("gpio34_a_1", "gpio"),
-	AB8505_PIN_HOG("GPIO34_H14", in_pd),
-
-	AB8505_MUX_HOG("modsclsda_d_1", "modsclsda"),
-	AB8505_PIN_HOG("GPIO40_J15", in_pd),
-	AB8505_PIN_HOG("GPIO41_J14", in_pd),
-
-	AB8505_MUX_HOG("gpio50_d_1", "gpio"),
-	AB8505_PIN_HOG("GPIO50_L4", in_nopull),
-
-	AB8505_MUX_HOG("resethw_d_1", "resethw"),
-	AB8505_PIN_HOG("GPIO52_D16", in_pd),
-
-	AB8505_MUX_HOG("service_d_1", "service"),
-	AB8505_PIN_HOG("GPIO53_D15", in_pd),
-};
-
-void __init mop500_pinmaps_init(void)
-{
-	if (machine_is_u8520())
-		pinctrl_register_mappings(ab8505_pinmap,
-					  ARRAY_SIZE(ab8505_pinmap));
-	else
-		pinctrl_register_mappings(ab8500_pinmap,
-					  ARRAY_SIZE(ab8500_pinmap));
-}
-
-void __init snowball_pinmaps_init(void)
-{
-	pinctrl_register_mappings(ab8500_pinmap,
-				  ARRAY_SIZE(ab8500_pinmap));
-}
-
-void __init hrefv60_pinmaps_init(void)
-{
-	pinctrl_register_mappings(ab8500_pinmap,
-				  ARRAY_SIZE(ab8500_pinmap));
-}
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
deleted file mode 100644
index fcbf3a13a539..000000000000
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Hanumath Prasad <hanumath.prasad@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include <asm/mach-types.h>
-
-#include "db8500-regs.h"
-#include "board-mop500.h"
-#include "ste-dma40-db8500.h"
-
-/*
- * v2 has a new version of this block that need to be forced, the number found
- * in hardware is incorrect
- */
-#define U8500_SDI_V2_PERIPHID 0x10480180
-
-/*
- * SDI 0 (MicroSD slot)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV29_SD_MM0,
-};
-
-static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV29_SD_MM0,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi0_data = {
-	.f_max		= 100000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_SD_HIGHSPEED |
-				MMC_CAP_MMC_HIGHSPEED |
-				MMC_CAP_ERASE |
-				MMC_CAP_UHS_SDR12 |
-				MMC_CAP_UHS_SDR25,
-	.gpio_wp	= -1,
-	.sigdir		= MCI_ST_FBCLKEN |
-				MCI_ST_CMDDIREN |
-				MCI_ST_DATA0DIREN |
-				MCI_ST_DATA2DIREN,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &mop500_sdi0_dma_cfg_rx,
-	.dma_tx_param	= &mop500_sdi0_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI1 (SDIO WLAN)
- */
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV32_SD_MM1,
-};
-
-static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV32_SD_MM1,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi1_data = {
-	.ocr_mask	= MMC_VDD_29_30,
-	.f_max		= 100000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_NONREMOVABLE,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &sdi1_dma_cfg_rx,
-	.dma_tx_param	= &sdi1_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 2 (POP eMMC, not on DB8500ed)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type =  DB8500_DMA_DEV28_SD_MM2,
-};
-
-static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV28_SD_MM2,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi2_data = {
-	.ocr_mask	= MMC_VDD_165_195,
-	.f_max		= 100000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_8_BIT_DATA |
-				MMC_CAP_NONREMOVABLE |
-				MMC_CAP_MMC_HIGHSPEED |
-				MMC_CAP_ERASE |
-				MMC_CAP_CMD23,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &mop500_sdi2_dma_cfg_rx,
-	.dma_tx_param	= &mop500_sdi2_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 4 (on-board eMMC)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type =  DB8500_DMA_DEV42_SD_MM4,
-};
-
-static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV42_SD_MM4,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi4_data = {
-	.f_max		= 100000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_8_BIT_DATA |
-				MMC_CAP_NONREMOVABLE |
-				MMC_CAP_MMC_HIGHSPEED |
-				MMC_CAP_ERASE |
-				MMC_CAP_CMD23,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &mop500_sdi4_dma_cfg_rx,
-	.dma_tx_param	= &mop500_sdi4_dma_cfg_tx,
-#endif
-};
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index d48e8662c676..7c7b0adca582 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -7,89 +7,11 @@
 #ifndef __BOARD_MOP500_H
 #define __BOARD_MOP500_H
 
-/* For NOMADIK_NR_GPIO */
-#include "irqs.h"
 #include <linux/platform_data/asoc-ux500-msp.h>
-#include <linux/amba/mmci.h>
 
-/* Snowball specific GPIO assignments, this board has no GPIO expander */
-#define SNOWBALL_ACCEL_INT1_GPIO	163
-#define SNOWBALL_ACCEL_INT2_GPIO	164
-#define SNOWBALL_MAGNET_DRDY_GPIO	165
-#define SNOWBALL_SDMMC_EN_GPIO		217
-#define SNOWBALL_SDMMC_1V8_3V_GPIO	228
-#define SNOWBALL_SDMMC_CD_GPIO		218
-
-/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
-#define HREFV60_SDMMC_1V8_3V_GPIO	5
-#define HREFV60_CAMERA_FLASH_ENABLE	21
-#define HREFV60_MAGNET_DRDY_GPIO	32
-#define HREFV60_DISP1_RST_GPIO		65
-#define HREFV60_DISP2_RST_GPIO		66
-#define HREFV60_ACCEL_INT1_GPIO		82
-#define HREFV60_ACCEL_INT2_GPIO		83
-#define HREFV60_SDMMC_CD_GPIO		95
-#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
-#define HREFV60_TOUCH_RST_GPIO		143
-#define HREFV60_HAL_SW_GPIO		145
-#define HREFV60_SDMMC_EN_GPIO		169
-#define HREFV60_MMIO_XENON_CHARGE	170
-#define HREFV60_PROX_SENSE_GPIO		217
-
-/* MOP500 generic GPIOs */
-#define CAMERA_FLASH_INT_PIN		7
-#define CYPRESS_TOUCH_INT_PIN		84
-#define XSHUTDOWN_PRIMARY_SENSOR	141
-#define XSHUTDOWN_SECONDARY_SENSOR	142
-#define CYPRESS_TOUCH_RST_GPIO		143
-#define MOP500_HDMI_RST_GPIO		196
-#define CYPRESS_SLAVE_SELECT_GPIO	216
-
-/* GPIOs on the TC35892 expander */
-#define MOP500_EGPIO(x)			(NOMADIK_NR_GPIO + (x))
-#define GPIO_MAGNET_DRDY		MOP500_EGPIO(1)
-#define GPIO_SDMMC_CD			MOP500_EGPIO(3)
-#define GPIO_CAMERA_FLASH_ENABLE	MOP500_EGPIO(4)
-#define GPIO_MMIO_XENON_CHARGE		MOP500_EGPIO(5)
-#define GPIO_PROX_SENSOR		MOP500_EGPIO(7)
-#define GPIO_HAL_SENSOR			MOP500_EGPIO(8)
-#define GPIO_ACCEL_INT1			MOP500_EGPIO(10)
-#define GPIO_ACCEL_INT2			MOP500_EGPIO(11)
-#define GPIO_BU21013_CS			MOP500_EGPIO(13)
-#define MOP500_DISP2_RST_GPIO		MOP500_EGPIO(14)
-#define MOP500_DISP1_RST_GPIO		MOP500_EGPIO(15)
-#define GPIO_SDMMC_EN			MOP500_EGPIO(17)
-#define GPIO_SDMMC_1V8_3V_SEL		MOP500_EGPIO(18)
-#define MOP500_EGPIO_END		MOP500_EGPIO(24)
-
-/*
- * GPIOs on the AB8500 mixed-signals circuit
- * Notice that we subtract 1 from the number passed into the macro, this is
- * because the AB8500 GPIO pins are enumbered starting from 1, so the value in
- * parens matches the GPIO pin number in the data sheet.
- */
-#define MOP500_AB8500_PIN_GPIO(x)	(MOP500_EGPIO_END + (x) - 1)
-/*Snowball AB8500 GPIO */
-#define SNOWBALL_VSMPS2_1V8_GPIO	MOP500_AB8500_PIN_GPIO(1)	/* SYSCLKREQ2/GPIO1 */
-#define SNOWBALL_PM_GPIO1_GPIO		MOP500_AB8500_PIN_GPIO(2)	/* SYSCLKREQ3/GPIO2 */
-#define SNOWBALL_WLAN_CLK_REQ_GPIO	MOP500_AB8500_PIN_GPIO(3)	/* SYSCLKREQ4/GPIO3 */
-#define SNOWBALL_PM_GPIO4_GPIO		MOP500_AB8500_PIN_GPIO(4)	/* SYSCLKREQ6/GPIO4 */
-#define SNOWBALL_EN_3V6_GPIO		MOP500_AB8500_PIN_GPIO(16)	/* PWMOUT3/GPIO16 */
-#define SNOWBALL_PME_ETH_GPIO		MOP500_AB8500_PIN_GPIO(24)	/* SYSCLKREQ7/GPIO24 */
-#define SNOWBALL_EN_3V3_ETH_GPIO	MOP500_AB8500_PIN_GPIO(26)	/* GPIO26 */
-
-struct device;
-extern struct mmci_platform_data mop500_sdi0_data;
-extern struct mmci_platform_data mop500_sdi1_data;
-extern struct mmci_platform_data mop500_sdi2_data;
-extern struct mmci_platform_data mop500_sdi4_data;
 extern struct msp_i2s_platform_data msp0_platform_data;
 extern struct msp_i2s_platform_data msp1_platform_data;
 extern struct msp_i2s_platform_data msp2_platform_data;
 extern struct msp_i2s_platform_data msp3_platform_data;
 
-void __init mop500_pinmaps_init(void);
-void __init snowball_pinmaps_init(void);
-void __init hrefv60_pinmaps_init(void);
-
 #endif
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 264f894c0e3d..842ebedbdd1c 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -35,10 +35,16 @@ static int __init ux500_l2x0_unlock(void)
 	return 0;
 }
 
-static int __init ux500_l2x0_init(void)
+static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
 {
-	u32 aux_val = 0x3e000000;
+	/*
+	 * We can't write to secure registers as we are in non-secure
+	 * mode, until we have some SMI service available.
+	 */
+}
 
+static int __init ux500_l2x0_init(void)
+{
 	if (cpu_is_u8500_family() || cpu_is_ux540_family())
 		l2x0_base = __io_address(U8500_L2CC_BASE);
 	else
@@ -48,28 +54,12 @@ static int __init ux500_l2x0_init(void)
 	/* Unlock before init */
 	ux500_l2x0_unlock();
 
-	/* DBx540's L2 has 128KB way size */
-	if (cpu_is_ux540_family())
-		/* 128KB way size */
-		aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
-	else
-		/* 64KB way size */
-		aux_val |= (0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+	outer_cache.write_sec = ux500_l2c310_write_sec;
 
-	/* 64KB way size, 8 way associativity, force WA */
 	if (of_have_populated_dt())
-		l2x0_of_init(aux_val, 0xc0000fff);
+		l2x0_of_init(0, ~0);
 	else
-		l2x0_init(l2x0_base, aux_val, 0xc0000fff);
-
-	/*
-	 * We can't disable l2 as we are in non secure mode, currently
-	 * this seems be called only during kexec path. So let's
-	 * override outer.disable with nasty assignment until we have
-	 * some SMI service available.
-	 */
-	outer_cache.disable = NULL;
-	outer_cache.set_debug = NULL;
+		l2x0_init(l2x0_base, 0, ~0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index bc8a6183560d..fa308f07fae5 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -27,7 +27,6 @@
 #include <asm/mach/map.h>
 
 #include "setup.h"
-#include "irqs.h"
 
 #include "board-mop500-regulators.h"
 #include "board-mop500.h"
@@ -35,14 +34,11 @@
 #include "id.h"
 
 struct ab8500_platform_data ab8500_platdata = {
-	.irq_base	= MOP500_AB8500_IRQ_BASE,
 	.regulator	= &ab8500_regulator_plat_data,
 };
 
 struct prcmu_pdata db8500_prcmu_pdata = {
 	.ab_platdata	= &ab8500_platdata,
-	.ab_irq		= IRQ_DB8500_AB8500,
-	.irq_base	= IRQ_PRCMU_BASE,
 	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
 	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
 };
@@ -146,15 +142,10 @@ static struct device * __init db8500_soc_device_init(void)
 	return ux500_soc_device_init(soc_id);
 }
 
-#ifdef CONFIG_MACH_UX500_DT
 static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA bindings. */
-	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  &mop500_sdi1_data),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  &mop500_sdi2_data),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  &mop500_sdi4_data),
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
 		       "ux500-msp-i2s.0", &msp0_platform_data),
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
@@ -191,16 +182,6 @@ static void __init u8500_init_machine(void)
 {
 	struct device *parent = db8500_soc_device_init();
 
-	/* Pinmaps must be in place before devices register */
-	if (of_machine_is_compatible("st-ericsson,mop500"))
-		mop500_pinmaps_init();
-	else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
-		snowball_pinmaps_init();
-	} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
-		hrefv60_pinmaps_init();
-	else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
-		/* TODO: Add pinmaps for ccu9540 board. */
-
 	/* automatically probe child nodes of dbx5x0 devices */
 	if (of_machine_is_compatible("st-ericsson,u8540"))
 		of_platform_populate(NULL, u8500_local_bus_nodes,
@@ -229,5 +210,3 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
 	.dt_compat      = stericsson_dt_platform_compat,
 	.restart        = ux500_restart,
 MACHINE_END
-
-#endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index d11ac4bf336c..db16b5a04ad5 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -52,17 +52,7 @@ void ux500_restart(enum reboot_mode mode, const char *cmd)
 */
 void __init ux500_init_irq(void)
 {
-	void __iomem *dist_base;
-	void __iomem *cpu_base;
-
 	gic_arch_extn.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND;
-
-	if (cpu_is_u8500_family() || cpu_is_ux540_family()) {
-		dist_base = __io_address(U8500_GIC_DIST_BASE);
-		cpu_base = __io_address(U8500_GIC_CPU_BASE);
-	} else
-		ux500_unknown_soc();
-
 	irqchip_init();
 
 	/*
diff --git a/arch/arm/mach-ux500/irqs-board-mop500.h b/arch/arm/mach-ux500/irqs-board-mop500.h
deleted file mode 100644
index d526dd8e87d3..000000000000
--- a/arch/arm/mach-ux500/irqs-board-mop500.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_BOARD_MOP500_H
-#define __MACH_IRQS_BOARD_MOP500_H
-
-/* Number of AB8500 irqs is taken from header file */
-#include <linux/mfd/abx500/ab8500.h>
-
-#define MOP500_AB8500_IRQ_BASE		IRQ_BOARD_START
-#define MOP500_AB8500_IRQ_END		(MOP500_AB8500_IRQ_BASE \
-					 + AB8500_MAX_NR_IRQS)
-
-/* TC35892 */
-#define TC35892_NR_INTERNAL_IRQS	8
-#define TC35892_INT_GPIO(x)		(TC35892_NR_INTERNAL_IRQS + (x))
-#define TC35892_NR_GPIOS		24
-#define TC35892_NR_IRQS			TC35892_INT_GPIO(TC35892_NR_GPIOS)
-
-#define MOP500_EGPIO_NR_IRQS		TC35892_NR_IRQS
-
-#define MOP500_EGPIO_IRQ_BASE		MOP500_AB8500_IRQ_END
-#define MOP500_EGPIO_IRQ_END		(MOP500_EGPIO_IRQ_BASE \
-					 + MOP500_EGPIO_NR_IRQS)
-/* STMPE1601 irqs */
-#define STMPE_NR_INTERNAL_IRQS          9
-#define STMPE_INT_GPIO(x)               (STMPE_NR_INTERNAL_IRQS + (x))
-#define STMPE_NR_GPIOS                  24
-#define STMPE_NR_IRQS                   STMPE_INT_GPIO(STMPE_NR_GPIOS)
-
-#define MOP500_STMPE1601_IRQBASE        MOP500_EGPIO_IRQ_END
-#define MOP500_STMPE1601_IRQ(x)         (MOP500_STMPE1601_IRQBASE + (x))
-
-#define MOP500_STMPE1601_IRQ_END	\
-	MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
-
-#define MOP500_NR_IRQS		MOP500_STMPE1601_IRQ_END
-
-#define MOP500_IRQ_END		MOP500_NR_IRQS
-
-/*
- * We may have several boards, but only one will run at a
- * time, so the one with most IRQs will bump this ahead,
- * but the IRQ_BOARD_START remains the same for either board.
- */
-#if MOP500_IRQ_END > IRQ_BOARD_END
-#undef IRQ_BOARD_END
-#define IRQ_BOARD_END	MOP500_IRQ_END
-#endif
-
-#endif
diff --git a/arch/arm/mach-ux500/irqs-db8500.h b/arch/arm/mach-ux500/irqs-db8500.h
deleted file mode 100644
index f3a9d5947ef3..000000000000
--- a/arch/arm/mach-ux500/irqs-db8500.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_DB8500_H
-#define __MACH_IRQS_DB8500_H
-
-#define IRQ_DB8500_MTU0			(IRQ_SHPI_START + 4)
-#define IRQ_DB8500_SPI2			(IRQ_SHPI_START + 6)
-#define IRQ_DB8500_PMU			(IRQ_SHPI_START + 7)
-#define IRQ_DB8500_SPI0			(IRQ_SHPI_START + 8)
-#define IRQ_DB8500_RTT			(IRQ_SHPI_START + 9)
-#define IRQ_DB8500_PKA			(IRQ_SHPI_START + 10)
-#define IRQ_DB8500_UART0		(IRQ_SHPI_START + 11)
-#define IRQ_DB8500_I2C3			(IRQ_SHPI_START + 12)
-#define IRQ_DB8500_L2CC			(IRQ_SHPI_START + 13)
-#define IRQ_DB8500_SSP0			(IRQ_SHPI_START + 14)
-#define IRQ_DB8500_CRYP1		(IRQ_SHPI_START + 15)
-#define IRQ_DB8500_MSP1_RX		(IRQ_SHPI_START + 16)
-#define IRQ_DB8500_MTU1			(IRQ_SHPI_START + 17)
-#define IRQ_DB8500_RTC			(IRQ_SHPI_START + 18)
-#define IRQ_DB8500_UART1		(IRQ_SHPI_START + 19)
-#define IRQ_DB8500_USB_WAKEUP		(IRQ_SHPI_START + 20)
-#define IRQ_DB8500_I2C0			(IRQ_SHPI_START + 21)
-#define IRQ_DB8500_I2C1			(IRQ_SHPI_START + 22)
-#define IRQ_DB8500_USBOTG		(IRQ_SHPI_START + 23)
-#define IRQ_DB8500_DMA_SECURE		(IRQ_SHPI_START + 24)
-#define IRQ_DB8500_DMA			(IRQ_SHPI_START + 25)
-#define IRQ_DB8500_UART2		(IRQ_SHPI_START + 26)
-#define IRQ_DB8500_ICN_PMU1		(IRQ_SHPI_START + 27)
-#define IRQ_DB8500_ICN_PMU2		(IRQ_SHPI_START + 28)
-#define IRQ_DB8500_HSIR_EXCEP		(IRQ_SHPI_START + 29)
-#define IRQ_DB8500_MSP0			(IRQ_SHPI_START + 31)
-#define IRQ_DB8500_HSIR_CH0_OVRRUN	(IRQ_SHPI_START + 32)
-#define IRQ_DB8500_HSIR_CH1_OVRRUN	(IRQ_SHPI_START + 33)
-#define IRQ_DB8500_HSIR_CH2_OVRRUN	(IRQ_SHPI_START + 34)
-#define IRQ_DB8500_HSIR_CH3_OVRRUN	(IRQ_SHPI_START + 35)
-#define IRQ_DB8500_HSIR_CH4_OVRRUN	(IRQ_SHPI_START + 36)
-#define IRQ_DB8500_HSIR_CH5_OVRRUN	(IRQ_SHPI_START + 37)
-#define IRQ_DB8500_HSIR_CH6_OVRRUN	(IRQ_SHPI_START + 38)
-#define IRQ_DB8500_HSIR_CH7_OVRRUN	(IRQ_SHPI_START + 39)
-#define IRQ_DB8500_AB8500		(IRQ_SHPI_START + 40)
-#define IRQ_DB8500_SDMMC2		(IRQ_SHPI_START + 41)
-#define IRQ_DB8500_SIA			(IRQ_SHPI_START + 42)
-#define IRQ_DB8500_SIA2			(IRQ_SHPI_START + 43)
-#define IRQ_DB8500_SVA			(IRQ_SHPI_START + 44)
-#define IRQ_DB8500_SVA2			(IRQ_SHPI_START + 45)
-#define IRQ_DB8500_PRCMU0		(IRQ_SHPI_START + 46)
-#define IRQ_DB8500_PRCMU1		(IRQ_SHPI_START + 47)
-#define IRQ_DB8500_DISP			(IRQ_SHPI_START + 48)
-#define IRQ_DB8500_SPI3			(IRQ_SHPI_START + 49)
-#define IRQ_DB8500_SDMMC1		(IRQ_SHPI_START + 50)
-#define IRQ_DB8500_I2C4			(IRQ_SHPI_START + 51)
-#define IRQ_DB8500_SSP1			(IRQ_SHPI_START + 52)
-#define IRQ_DB8500_SKE			(IRQ_SHPI_START + 53)
-#define IRQ_DB8500_KB			(IRQ_SHPI_START + 54)
-#define IRQ_DB8500_I2C2			(IRQ_SHPI_START + 55)
-#define IRQ_DB8500_B2R2			(IRQ_SHPI_START + 56)
-#define IRQ_DB8500_CRYP0		(IRQ_SHPI_START + 57)
-#define IRQ_DB8500_SDMMC3		(IRQ_SHPI_START + 59)
-#define IRQ_DB8500_SDMMC0		(IRQ_SHPI_START + 60)
-#define IRQ_DB8500_HSEM			(IRQ_SHPI_START + 61)
-#define IRQ_DB8500_MSP1			(IRQ_SHPI_START + 62)
-#define IRQ_DB8500_SBAG			(IRQ_SHPI_START + 63)
-#define IRQ_DB8500_SPI1			(IRQ_SHPI_START + 96)
-#define IRQ_DB8500_SRPTIMER		(IRQ_SHPI_START + 97)
-#define IRQ_DB8500_MSP2			(IRQ_SHPI_START + 98)
-#define IRQ_DB8500_SDMMC4		(IRQ_SHPI_START + 99)
-#define IRQ_DB8500_SDMMC5		(IRQ_SHPI_START + 100)
-#define IRQ_DB8500_HSIRD0		(IRQ_SHPI_START + 104)
-#define IRQ_DB8500_HSIRD1		(IRQ_SHPI_START + 105)
-#define IRQ_DB8500_HSITD0		(IRQ_SHPI_START + 106)
-#define IRQ_DB8500_HSITD1		(IRQ_SHPI_START + 107)
-#define IRQ_DB8500_CTI0			(IRQ_SHPI_START + 108)
-#define IRQ_DB8500_CTI1			(IRQ_SHPI_START + 109)
-#define IRQ_DB8500_ICN_ERR		(IRQ_SHPI_START + 110)
-#define IRQ_DB8500_MALI_PPMMU		(IRQ_SHPI_START + 112)
-#define IRQ_DB8500_MALI_PP		(IRQ_SHPI_START + 113)
-#define IRQ_DB8500_MALI_GPMMU		(IRQ_SHPI_START + 114)
-#define IRQ_DB8500_MALI_GP		(IRQ_SHPI_START + 115)
-#define IRQ_DB8500_MALI			(IRQ_SHPI_START + 116)
-#define IRQ_DB8500_PRCMU_SEM		(IRQ_SHPI_START + 118)
-#define IRQ_DB8500_GPIO0		(IRQ_SHPI_START + 119)
-#define IRQ_DB8500_GPIO1		(IRQ_SHPI_START + 120)
-#define IRQ_DB8500_GPIO2		(IRQ_SHPI_START + 121)
-#define IRQ_DB8500_GPIO3		(IRQ_SHPI_START + 122)
-#define IRQ_DB8500_GPIO4		(IRQ_SHPI_START + 123)
-#define IRQ_DB8500_GPIO5		(IRQ_SHPI_START + 124)
-#define IRQ_DB8500_GPIO6		(IRQ_SHPI_START + 125)
-#define IRQ_DB8500_GPIO7		(IRQ_SHPI_START + 126)
-#define IRQ_DB8500_GPIO8		(IRQ_SHPI_START + 127)
-
-#define IRQ_CA_WAKE_REQ_ED			(IRQ_SHPI_START + 71)
-#define IRQ_AC_READ_NOTIFICATION_0_ED		(IRQ_SHPI_START + 66)
-#define IRQ_AC_READ_NOTIFICATION_1_ED		(IRQ_SHPI_START + 64)
-#define IRQ_CA_MSG_PEND_NOTIFICATION_0_ED	(IRQ_SHPI_START + 67)
-#define IRQ_CA_MSG_PEND_NOTIFICATION_1_ED	(IRQ_SHPI_START + 65)
-
-#define IRQ_CA_WAKE_REQ_V1			(IRQ_SHPI_START + 83)
-#define IRQ_AC_READ_NOTIFICATION_0_V1		(IRQ_SHPI_START + 78)
-#define IRQ_AC_READ_NOTIFICATION_1_V1		(IRQ_SHPI_START + 76)
-#define IRQ_CA_MSG_PEND_NOTIFICATION_0_V1	(IRQ_SHPI_START + 79)
-#define IRQ_CA_MSG_PEND_NOTIFICATION_1_V1	(IRQ_SHPI_START + 77)
-
-#ifdef CONFIG_UX500_SOC_DB8500
-
-/* Virtual interrupts corresponding to the PRCMU wakeups.  */
-#define IRQ_PRCMU_BASE IRQ_SOC_START
-#define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23)
-
-/*
- * We may have several SoCs, but only one will run at a
- * time, so the one with most IRQs will bump this ahead,
- * but the IRQ_SOC_START remains the same for either SoC.
- */
-#if IRQ_SOC_END < IRQ_PRCMU_END
-#undef IRQ_SOC_END
-#define IRQ_SOC_END IRQ_PRCMU_END
-#endif
-
-#endif /* CONFIG_UX500_SOC_DB8500 */
-#endif
diff --git a/arch/arm/mach-ux500/irqs.h b/arch/arm/mach-ux500/irqs.h
deleted file mode 100644
index 15b2af698ed7..000000000000
--- a/arch/arm/mach-ux500/irqs.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  Copyright (C) 2008 STMicroelectronics
- *  Copyright (C) 2009 ST-Ericsson.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef ASM_ARCH_IRQS_H
-#define ASM_ARCH_IRQS_H
-
-#define IRQ_LOCALTIMER			29
-#define IRQ_LOCALWDOG			30
-
-/* Shared Peripheral Interrupt (SHPI) */
-#define IRQ_SHPI_START			32
-
-/*
- * MTU0 preserved for now until plat-nomadik is taught not to use it.  Don't
- * add any other IRQs here, use the irqs-dbx500.h files.
- */
-#define IRQ_MTU0		(IRQ_SHPI_START + 4)
-
-#define DBX500_NR_INTERNAL_IRQS		166
-
-/* After chip-specific IRQ numbers we have the GPIO ones */
-#define NOMADIK_NR_GPIO			288
-#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + DBX500_NR_INTERNAL_IRQS)
-#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - DBX500_NR_INTERNAL_IRQS)
-#define IRQ_GPIO_END			NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
-
-#define IRQ_SOC_START		IRQ_GPIO_END
-/* This will be overridden by SoC-specific irq headers */
-#define IRQ_SOC_END		IRQ_SOC_START
-
-#include "irqs-db8500.h"
-
-#define IRQ_BOARD_START		IRQ_SOC_END
-/* This will be overridden by board-specific irq headers */
-#define IRQ_BOARD_END		IRQ_BOARD_START
-
-#ifdef CONFIG_MACH_MOP500
-#include "irqs-board-mop500.h"
-#endif
-
-#define UX500_NR_IRQS		IRQ_BOARD_END
-
-#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index a335126ae18f..be83ba25f81b 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -108,7 +108,7 @@ void __init versatile_init_irq(void)
 
 	np = of_find_matching_node_by_address(NULL, vic_of_match,
 					      VERSATILE_VIC_BASE);
-	__vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0, np);
+	__vic_init(VA_VIC_BASE, 0, IRQ_VIC_START, ~0, 0, np);
 
 	writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
 
@@ -310,6 +310,21 @@ static struct platform_device char_lcd_device = {
 	.resource       =       char_lcd_resources,
 };
 
+static struct resource leds_resources[] = {
+	{
+		.start	= VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET,
+		.end	= VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET + 4,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device leds_device = {
+	.name		= "versatile-leds",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(leds_resources),
+	.resource	= leds_resources,
+};
+
 /*
  * Clock handling
  */
@@ -795,6 +810,7 @@ void __init versatile_init(void)
 	platform_device_register(&versatile_i2c_device);
 	platform_device_register(&smc91x_device);
 	platform_device_register(&char_lcd_device);
+	platform_device_register(&leds_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-versatile/include/mach/timex.h b/arch/arm/mach-versatile/include/mach/timex.h
deleted file mode 100644
index 426199b1add5..000000000000
--- a/arch/arm/mach-versatile/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/timex.h
- *
- *  Versatile architecture timex specifications
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 4a70be485ff8..90249cfc37b3 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -4,18 +4,14 @@ config ARCH_VEXPRESS
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
+	select ARM_GLOBAL_TIMER
 	select ARM_TIMER_SP804
-	select COMMON_CLK
 	select COMMON_CLK_VERSATILE
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
-	select HAVE_SMP
 	select ICST
-	select MIGHT_HAVE_CACHE_L2X0
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_CLCD
 	select POWER_RESET
@@ -23,6 +19,8 @@ config ARCH_VEXPRESS
 	select POWER_SUPPLY
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select VEXPRESS_CONFIG
+	select VEXPRESS_SYSCFG
+	select MFD_VEXPRESS_SYSREG
 	help
 	  This option enables support for systems using Cortex processor based
 	  ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 0997e0b7494c..fc649bc09d0c 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -8,8 +8,11 @@ obj-y					:= v2m.o
 obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
 obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
 CFLAGS_dcscb.o				+= -march=armv7-a
+CFLAGS_REMOVE_dcscb.o			= -pg
 obj-$(CONFIG_ARCH_VEXPRESS_SPC)		+= spc.o
+CFLAGS_REMOVE_spc.o			= -pg
 obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o
 CFLAGS_tc2_pm.o				+= -march=armv7-a
+CFLAGS_REMOVE_tc2_pm.o			= -pg
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index bde4374ab6d5..152fad91b3ae 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -4,10 +4,9 @@
 /* Tile's peripherals static mappings should start here */
 #define V2T_PERIPH 0xf8200000
 
-void vexpress_dt_smp_map_io(void);
-
 bool vexpress_smp_init_ops(void);
 
 extern struct smp_operations	vexpress_smp_ops;
+extern struct smp_operations	vexpress_smp_dt_ops;
 
 extern void vexpress_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 6f34497a4245..86150d7a2e7d 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -45,6 +45,23 @@ static void __init ct_ca9x4_map_io(void)
 	iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
 }
 
+static void __init ca9x4_l2_init(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+	void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
+
+	if (l2x0_base) {
+		/* set RAM latencies to 1 cycle for this core tile. */
+		writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
+		writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
+
+		l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
+	} else {
+		pr_err("L2C: unable to map L2 cache controller\n");
+	}
+#endif
+}
+
 #ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER);
 
@@ -63,6 +80,7 @@ static void __init ct_ca9x4_init_irq(void)
 	gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K),
 		 ioremap(A9_MPCORE_GIC_CPU, SZ_256));
 	ca9x4_twd_init();
+	ca9x4_l2_init();
 }
 
 static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
@@ -128,6 +146,10 @@ static struct platform_device pmu_device = {
 	.resource	= pmu_resources,
 };
 
+static struct clk_lookup osc1_lookup = {
+	.dev_id		= "ct:clcd",
+};
+
 static struct platform_device osc1_device = {
 	.name		= "vexpress-osc",
 	.id		= 1,
@@ -135,30 +157,18 @@ static struct platform_device osc1_device = {
 	.resource	= (struct resource []) {
 		VEXPRESS_RES_FUNC(0xf, 1),
 	},
+	.dev.platform_data = &osc1_lookup,
 };
 
 static void __init ct_ca9x4_init(void)
 {
 	int i;
 
-#ifdef CONFIG_CACHE_L2X0
-	void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
-
-	/* set RAM latencies to 1 cycle for this core tile. */
-	writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
-	writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
-
-	l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
-#endif
-
 	for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
 		amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
 
 	platform_device_register(&pmu_device);
-	platform_device_register(&osc1_device);
-
-	WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev),
-			NULL, "ct:clcd"));
+	vexpress_syscfg_device_register(&osc1_device);
 }
 
 #ifdef CONFIG_SMP
diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c
index 14d499688736..30b993399ed7 100644
--- a/arch/arm/mach-vexpress/dcscb.c
+++ b/arch/arm/mach-vexpress/dcscb.c
@@ -51,12 +51,14 @@ static int dcscb_allcpus_mask[2];
 static int dcscb_power_up(unsigned int cpu, unsigned int cluster)
 {
 	unsigned int rst_hold, cpumask = (1 << cpu);
-	unsigned int all_mask = dcscb_allcpus_mask[cluster];
+	unsigned int all_mask;
 
 	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
 	if (cpu >= 4 || cluster >= 2)
 		return -EINVAL;
 
+	all_mask = dcscb_allcpus_mask[cluster];
+
 	/*
 	 * Since this is called with IRQs enabled, and no arch_spin_lock_irq
 	 * variant exists, we need to disable IRQs manually here.
@@ -101,11 +103,12 @@ static void dcscb_power_down(void)
 	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	cpumask = (1 << cpu);
-	all_mask = dcscb_allcpus_mask[cluster];
 
 	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
 	BUG_ON(cpu >= 4 || cluster >= 2);
 
+	all_mask = dcscb_allcpus_mask[cluster];
+
 	__mcpm_cpu_going_down(cpu, cluster);
 
 	arch_spin_lock(&dcscb_lock);
@@ -137,11 +140,16 @@ static void dcscb_power_down(void)
 		v7_exit_coherency_flush(all);
 
 		/*
-		 * This is a harmless no-op.  On platforms with a real
-		 * outer cache this might either be needed or not,
-		 * depending on where the outer cache sits.
+		 * A full outer cache flush could be needed at this point
+		 * on platforms with such a cache, depending on where the
+		 * outer cache sits. In some cases the notion of a "last
+		 * cluster standing" would need to be implemented if the
+		 * outer cache is shared across clusters. In any case, when
+		 * the outer cache needs flushing, there is no concurrent
+		 * access to the cache controller to worry about and no
+		 * special locking besides what is already provided by the
+		 * MCPM state machinery is needed.
 		 */
-		outer_flush_all();
 
 		/*
 		 * Disable cluster-level coherency by masking
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index 993c9ae5dc5e..a1f3804fd5a5 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -12,8 +12,7 @@
 #include <linux/errno.h>
 #include <linux/smp.h>
 #include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_fdt.h>
+#include <linux/of_address.h>
 #include <linux/vexpress.h>
 
 #include <asm/mcpm.h>
@@ -26,154 +25,13 @@
 
 #include "core.h"
 
-#if defined(CONFIG_OF)
-
-static enum {
-	GENERIC_SCU,
-	CORTEX_A9_SCU,
-} vexpress_dt_scu __initdata = GENERIC_SCU;
-
-static struct map_desc vexpress_dt_cortex_a9_scu_map __initdata = {
-	.virtual	= V2T_PERIPH,
-	/* .pfn	set in vexpress_dt_init_cortex_a9_scu() */
-	.length		= SZ_128,
-	.type		= MT_DEVICE,
-};
-
-static void *vexpress_dt_cortex_a9_scu_base __initdata;
-
-const static char *vexpress_dt_cortex_a9_match[] __initconst = {
-	"arm,cortex-a5-scu",
-	"arm,cortex-a9-scu",
-	NULL
-};
-
-static int __init vexpress_dt_find_scu(unsigned long node,
-		const char *uname, int depth, void *data)
-{
-	if (of_flat_dt_match(node, vexpress_dt_cortex_a9_match)) {
-		phys_addr_t phys_addr;
-		__be32 *reg = of_get_flat_dt_prop(node, "reg", NULL);
-
-		if (WARN_ON(!reg))
-			return -EINVAL;
-
-		phys_addr = be32_to_cpup(reg);
-		vexpress_dt_scu = CORTEX_A9_SCU;
-
-		vexpress_dt_cortex_a9_scu_map.pfn = __phys_to_pfn(phys_addr);
-		iotable_init(&vexpress_dt_cortex_a9_scu_map, 1);
-		vexpress_dt_cortex_a9_scu_base = ioremap(phys_addr, SZ_256);
-		if (WARN_ON(!vexpress_dt_cortex_a9_scu_base))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-void __init vexpress_dt_smp_map_io(void)
-{
-	if (initial_boot_params)
-		WARN_ON(of_scan_flat_dt(vexpress_dt_find_scu, NULL));
-}
-
-static int __init vexpress_dt_cpus_num(unsigned long node, const char *uname,
-		int depth, void *data)
-{
-	static int prev_depth = -1;
-	static int nr_cpus = -1;
-
-	if (prev_depth > depth && nr_cpus > 0)
-		return nr_cpus;
-
-	if (nr_cpus < 0 && strcmp(uname, "cpus") == 0)
-		nr_cpus = 0;
-
-	if (nr_cpus >= 0) {
-		const char *device_type = of_get_flat_dt_prop(node,
-				"device_type", NULL);
-
-		if (device_type && strcmp(device_type, "cpu") == 0)
-			nr_cpus++;
-	}
-
-	prev_depth = depth;
-
-	return 0;
-}
-
-static void __init vexpress_dt_smp_init_cpus(void)
-{
-	int ncores = 0, i;
-
-	switch (vexpress_dt_scu) {
-	case GENERIC_SCU:
-		ncores = of_scan_flat_dt(vexpress_dt_cpus_num, NULL);
-		break;
-	case CORTEX_A9_SCU:
-		ncores = scu_get_core_count(vexpress_dt_cortex_a9_scu_base);
-		break;
-	default:
-		WARN_ON(1);
-		break;
-	}
-
-	if (ncores < 2)
-		return;
-
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-				ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; ++i)
-		set_cpu_possible(i, true);
-}
-
-static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
-{
-	int i;
-
-	switch (vexpress_dt_scu) {
-	case GENERIC_SCU:
-		for (i = 0; i < max_cpus; i++)
-			set_cpu_present(i, true);
-		break;
-	case CORTEX_A9_SCU:
-		scu_enable(vexpress_dt_cortex_a9_scu_base);
-		break;
-	default:
-		WARN_ON(1);
-		break;
-	}
-}
-
-#else
-
-static void __init vexpress_dt_smp_init_cpus(void)
-{
-	WARN_ON(1);
-}
-
-void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
-{
-	WARN_ON(1);
-}
-
-#endif
-
 /*
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
 static void __init vexpress_smp_init_cpus(void)
 {
-	if (ct_desc)
-		ct_desc->init_cpu_map();
-	else
-		vexpress_dt_smp_init_cpus();
-
+	ct_desc->init_cpu_map();
 }
 
 static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
@@ -182,10 +40,7 @@ static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
 	 */
-	if (ct_desc)
-		ct_desc->smp_enable(max_cpus);
-	else
-		vexpress_dt_smp_prepare_cpus(max_cpus);
+	ct_desc->smp_enable(max_cpus);
 
 	/*
 	 * Write the address of secondary startup into the
@@ -223,3 +78,39 @@ bool __init vexpress_smp_init_ops(void)
 #endif
 	return false;
 }
+
+#if defined(CONFIG_OF)
+
+static const struct of_device_id vexpress_smp_dt_scu_match[] __initconst = {
+	{ .compatible = "arm,cortex-a5-scu", },
+	{ .compatible = "arm,cortex-a9-scu", },
+	{}
+};
+
+static void __init vexpress_smp_dt_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *scu = of_find_matching_node(NULL,
+			vexpress_smp_dt_scu_match);
+
+	if (scu)
+		scu_enable(of_iomap(scu, 0));
+
+	/*
+	 * Write the address of secondary startup into the
+	 * system-wide flags register. The boot monitor waits
+	 * until it receives a soft interrupt, and then the
+	 * secondary CPU branches to this address.
+	 */
+	vexpress_flags_set(virt_to_phys(versatile_secondary_startup));
+}
+
+struct smp_operations __initdata vexpress_smp_dt_ops = {
+	.smp_prepare_cpus	= vexpress_smp_dt_prepare_cpus,
+	.smp_secondary_init	= versatile_secondary_init,
+	.smp_boot_secondary	= versatile_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= vexpress_cpu_die,
+#endif
+};
+
+#endif
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index c26ef5b92ca7..2c2754e79cb3 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -392,7 +392,7 @@ static irqreturn_t ve_spc_irq_handler(int irq, void *data)
  *  +--------------------------+
  *  | 31      20 | 19        0 |
  *  +--------------------------+
- *  |   u_volt   |  freq(kHz)  |
+ *  |   m_volt   |  freq(kHz)  |
  *  +--------------------------+
  */
 #define MULT_FACTOR	20
@@ -414,7 +414,7 @@ static int ve_spc_populate_opps(uint32_t cluster)
 		ret = ve_spc_read_sys_cfg(SYSCFG_SCC, off, &data);
 		if (!ret) {
 			opps->freq = (data & FREQ_MASK) * MULT_FACTOR;
-			opps->u_volt = data >> VOLT_SHIFT;
+			opps->u_volt = (data >> VOLT_SHIFT) * 1000;
 		} else {
 			break;
 		}
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index 29e7785a54bc..b743a0ae02ce 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -209,7 +209,7 @@ static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster)
 #define POLL_MSEC 10
 #define TIMEOUT_MSEC 1000
 
-static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster)
+static int tc2_pm_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
 {
 	unsigned tries;
 
@@ -290,7 +290,7 @@ static void tc2_pm_powered_up(void)
 static const struct mcpm_platform_ops tc2_pm_power_ops = {
 	.power_up		= tc2_pm_power_up,
 	.power_down		= tc2_pm_power_down,
-	.power_down_finish	= tc2_pm_power_down_finish,
+	.wait_for_powerdown	= tc2_pm_wait_for_powerdown,
 	.suspend		= tc2_pm_suspend,
 	.powered_up		= tc2_pm_powered_up,
 };
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 4f8b8cb17ff5..6ff681a24ba7 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -201,8 +201,9 @@ static struct platform_device v2m_cf_device = {
 
 static struct mmci_platform_data v2m_mmci_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_wp	= VEXPRESS_GPIO_MMC_WPROT,
-	.gpio_cd	= VEXPRESS_GPIO_MMC_CARDIN,
+	.status		= vexpress_get_mci_cardin,
+	.gpio_cd	= -1,
+	.gpio_wp	= -1,
 };
 
 static struct resource v2m_sysreg_resources[] = {
@@ -340,11 +341,6 @@ static void __init v2m_init(void)
 	regulator_register_fixed(0, v2m_eth_supplies,
 			ARRAY_SIZE(v2m_eth_supplies));
 
-	platform_device_register(&v2m_muxfpga_device);
-	platform_device_register(&v2m_shutdown_device);
-	platform_device_register(&v2m_reboot_device);
-	platform_device_register(&v2m_dvimode_device);
-
 	platform_device_register(&v2m_sysreg_device);
 	platform_device_register(&v2m_pcie_i2c_device);
 	platform_device_register(&v2m_ddc_i2c_device);
@@ -356,6 +352,11 @@ static void __init v2m_init(void)
 	for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
 		amba_device_register(v2m_amba_devs[i], &iomem_resource);
 
+	vexpress_syscfg_device_register(&v2m_muxfpga_device);
+	vexpress_syscfg_device_register(&v2m_shutdown_device);
+	vexpress_syscfg_device_register(&v2m_reboot_device);
+	vexpress_syscfg_device_register(&v2m_dvimode_device);
+
 	ct_desc->init_tile();
 }
 
@@ -369,71 +370,9 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express")
 	.init_machine	= v2m_init,
 MACHINE_END
 
-static struct map_desc v2m_rs1_io_desc __initdata = {
-	.virtual	= V2M_PERIPH,
-	.pfn		= __phys_to_pfn(0x1c000000),
-	.length		= SZ_2M,
-	.type		= MT_DEVICE,
-};
-
-static int __init v2m_dt_scan_memory_map(unsigned long node, const char *uname,
-		int depth, void *data)
-{
-	const char **map = data;
-
-	if (strcmp(uname, "motherboard") != 0)
-		return 0;
-
-	*map = of_get_flat_dt_prop(node, "arm,v2m-memory-map", NULL);
-
-	return 1;
-}
-
-void __init v2m_dt_map_io(void)
-{
-	const char *map = NULL;
-
-	of_scan_flat_dt(v2m_dt_scan_memory_map, &map);
-
-	if (map && strcmp(map, "rs1") == 0)
-		iotable_init(&v2m_rs1_io_desc, 1);
-	else
-		iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
-
-#if defined(CONFIG_SMP)
-	vexpress_dt_smp_map_io();
-#endif
-}
-
-void __init v2m_dt_init_early(void)
-{
-	u32 dt_hbi;
-
-	vexpress_sysreg_of_early_init();
-
-	/* Confirm board type against DT property, if available */
-	if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) {
-		u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER);
-
-		if (WARN_ON(dt_hbi != hbi))
-			pr_warning("vexpress: DT HBI (%x) is not matching "
-					"hardware (%x)!\n", dt_hbi, hbi);
-	}
-
-	versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
-}
-
-static const struct of_device_id v2m_dt_bus_match[] __initconst = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "arm,amba-bus", },
-	{ .compatible = "arm,vexpress,config-bus", },
-	{}
-};
-
 static void __init v2m_dt_init(void)
 {
-	l2x0_of_init(0x00400000, 0xfe0fffff);
-	of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const v2m_dt_match[] __initconst = {
@@ -443,9 +382,9 @@ static const char * const v2m_dt_match[] __initconst = {
 
 DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
 	.dt_compat	= v2m_dt_match,
-	.smp		= smp_ops(vexpress_smp_ops),
+	.l2c_aux_val	= 0x00400000,
+	.l2c_aux_mask	= 0xfe0fffff,
+	.smp		= smp_ops(vexpress_smp_dt_ops),
 	.smp_init	= smp_init_ops(vexpress_smp_init_ops),
-	.map_io		= v2m_dt_map_io,
-	.init_early	= v2m_dt_init_early,
 	.init_machine	= v2m_dt_init,
 MACHINE_END
diff --git a/arch/arm/mach-virt/Kconfig b/arch/arm/mach-virt/Kconfig
deleted file mode 100644
index 081d46929436..000000000000
--- a/arch/arm/mach-virt/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config ARCH_VIRT
-	bool "Dummy Virtual Machine" if ARCH_MULTI_V7
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-	select HAVE_ARM_ARCH_TIMER
-	select ARM_PSCI
-	select HAVE_SMP
-	select CPU_V7
-	select SPARSE_IRQ
-	select USE_OF
diff --git a/arch/arm/mach-virt/Makefile b/arch/arm/mach-virt/Makefile
deleted file mode 100644
index 7ddbfa60227f..000000000000
--- a/arch/arm/mach-virt/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y					:= virt.o
diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c
deleted file mode 100644
index b184e57d1854..000000000000
--- a/arch/arm/mach-virt/virt.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Dummy Virtual Machine - does what it says on the tin.
- *
- * Copyright (C) 2012 ARM Ltd
- * Authors: Will Deacon <will.deacon@arm.com>,
- *          Marc Zyngier <marc.zyngier@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/smp.h>
-
-#include <asm/mach/arch.h>
-
-static void __init virt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *virt_dt_match[] = {
-	"linux,dummy-virt",
-	"xen,xenvm",
-	NULL
-};
-
-DT_MACHINE_START(VIRT, "Dummy Virtual Machine")
-	.init_machine	= virt_init,
-	.dt_compat	= virt_dt_match,
-MACHINE_END
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 927be93b692e..08f56a41cb55 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -3,8 +3,6 @@ config ARCH_VT8500
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
-	select CLKSRC_OF
-	select GENERIC_CLOCKEVENTS
 	select VT8500_TIMER
 	select PINCTRL
 	help
@@ -21,7 +19,6 @@ config ARCH_WM8750
 	bool "WonderMedia WM8750"
 	depends on ARCH_MULTI_V6
 	select ARCH_VT8500
-	select CPU_V6
 	help
 	  Support for WonderMedia WM8750 System-on-Chip.
 
@@ -29,6 +26,5 @@ config ARCH_WM8850
 	bool "WonderMedia WM8850"
 	depends on ARCH_MULTI_V7
 	select ARCH_VT8500
-	select CPU_V7
 	help
 	  Support for WonderMedia WM8850 System-on-Chip.
diff --git a/arch/arm/mach-w90x900/include/mach/timex.h b/arch/arm/mach-w90x900/include/mach/timex.h
deleted file mode 100644
index 164dce0b64db..000000000000
--- a/arch/arm/mach-w90x900/include/mach/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/timex.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/timex.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE Now, I don't use it. */
-
-#define CLOCK_TICK_RATE 15000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 30fbca844575..9230d3725599 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -111,7 +111,7 @@ static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id)
 
 static struct irqaction nuc900_timer0_irq = {
 	.name		= "nuc900-timer0",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= nuc900_timer0_interrupt,
 };
 
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 6b04260aa142..573e0db1d0f0 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -1,18 +1,16 @@
 config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
-	select COMMON_CLK
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
+	select ARM_GLOBAL_TIMER if !CPU_FREQ
+	select CADENCE_TTC_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select ICST
-	select MIGHT_HAVE_CACHE_L2X0
-	select USE_OF
-	select HAVE_SMP
-	select SPARSE_IRQ
-	select CADENCE_TTC_TIMER
-	select ARM_GLOBAL_TIMER
+	select MFD_SYSCON
+	select SOC_BUS
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 8c09a8393fb6..31a6fa40ba37 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -19,6 +19,7 @@
 #include <linux/cpumask.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/clk/zynq.h>
 #include <linux/clocksource.h>
 #include <linux/of_address.h>
@@ -28,6 +29,8 @@
 #include <linux/memblock.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -36,10 +39,15 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/smp_scu.h>
+#include <asm/system_info.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
 
+#define ZYNQ_DEVCFG_MCTRL		0x80
+#define ZYNQ_DEVCFG_PS_VERSION_SHIFT	28
+#define ZYNQ_DEVCFG_PS_VERSION_MASK	0xF
+
 void __iomem *zynq_scu_base;
 
 /**
@@ -59,24 +67,89 @@ static struct platform_device zynq_cpuidle_device = {
 };
 
 /**
+ * zynq_get_revision - Get Zynq silicon revision
+ *
+ * Return: Silicon version or -1 otherwise
+ */
+static int __init zynq_get_revision(void)
+{
+	struct device_node *np;
+	void __iomem *zynq_devcfg_base;
+	u32 revision;
+
+	np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-devcfg-1.0");
+	if (!np) {
+		pr_err("%s: no devcfg node found\n", __func__);
+		return -1;
+	}
+
+	zynq_devcfg_base = of_iomap(np, 0);
+	if (!zynq_devcfg_base) {
+		pr_err("%s: Unable to map I/O memory\n", __func__);
+		return -1;
+	}
+
+	revision = readl(zynq_devcfg_base + ZYNQ_DEVCFG_MCTRL);
+	revision >>= ZYNQ_DEVCFG_PS_VERSION_SHIFT;
+	revision &= ZYNQ_DEVCFG_PS_VERSION_MASK;
+
+	iounmap(zynq_devcfg_base);
+
+	return revision;
+}
+
+/**
  * zynq_init_machine - System specific initialization, intended to be
  *		       called from board specific initialization.
  */
 static void __init zynq_init_machine(void)
 {
+	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	struct device *parent = NULL;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		goto out;
+
+	system_rev = zynq_get_revision();
+
+	soc_dev_attr->family = kasprintf(GFP_KERNEL, "Xilinx Zynq");
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "0x%x", system_rev);
+	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "0x%x",
+					 zynq_slcr_get_device_id());
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->family);
+		kfree(soc_dev_attr->revision);
+		kfree(soc_dev_attr->soc_id);
+		kfree(soc_dev_attr);
+		goto out;
+	}
+
+	parent = soc_device_to_device(soc_dev);
+
+out:
 	/*
-	 * 64KB way size, 8-way associativity, parity disabled
+	 * Finished with the static registrations now; fill in the missing
+	 * devices
 	 */
-	l2x0_of_init(0x02060000, 0xF0F0FFFF);
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 
 	platform_device_register(&zynq_cpuidle_device);
+	platform_device_register_full(&devinfo);
+
+	zynq_slcr_init();
 }
 
 static void __init zynq_timer_init(void)
 {
-	zynq_slcr_init();
+	zynq_early_slcr_init();
+
+	zynq_clock_init();
+	of_clk_init(NULL);
 	clocksource_of_init();
 }
 
@@ -124,6 +197,9 @@ static const char * const zynq_dt_match[] = {
 };
 
 DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
+	/* 64KB way size, 8-way associativity, parity disabled */
+	.l2c_aux_val	= 0x02000000,
+	.l2c_aux_mask	= 0xf0ffffff,
 	.smp		= smp_ops(zynq_smp_ops),
 	.map_io		= zynq_map_io,
 	.init_irq	= zynq_irq_init,
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index c22c92cea8cb..f652f0a884a6 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -20,9 +20,11 @@
 void zynq_secondary_startup(void);
 
 extern int zynq_slcr_init(void);
+extern int zynq_early_slcr_init(void);
 extern void zynq_slcr_system_reset(void);
 extern void zynq_slcr_cpu_stop(int cpu);
 extern void zynq_slcr_cpu_start(int cpu);
+extern u32 zynq_slcr_get_device_id(void);
 
 #ifdef CONFIG_SMP
 extern void secondary_startup(void);
@@ -33,7 +35,6 @@ extern int zynq_cpun_start(u32 address, int cpu);
 extern struct smp_operations zynq_smp_ops __initdata;
 #endif
 
-extern void __iomem *zynq_slcr_base;
 extern void __iomem *zynq_scu_base;
 
 /* Hotplug */
diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
index 57a32869f0aa..dd8c071941e7 100644
--- a/arch/arm/mach-zynq/headsmp.S
+++ b/arch/arm/mach-zynq/headsmp.S
@@ -8,9 +8,12 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <asm/assembler.h>
 
 ENTRY(zynq_secondary_trampoline)
-	ldr	r0, [pc]
+ARM_BE8(setend	be)				@ ensure we are in BE8 mode
+	ldr	r0, zynq_secondary_trampoline_jump
+ARM_BE8(rev	r0, r0)
 	bx	r0
 .globl zynq_secondary_trampoline_jump
 zynq_secondary_trampoline_jump:
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index 1836d5a34606..c43a2d16e223 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -15,7 +15,9 @@
  */
 
 #include <linux/io.h>
+#include <linux/mfd/syscon.h>
 #include <linux/of_address.h>
+#include <linux/regmap.h>
 #include <linux/clk/zynq.h>
 #include "common.h"
 
@@ -24,12 +26,80 @@
 #define SLCR_PS_RST_CTRL_OFFSET		0x200 /* PS Software Reset Control */
 #define SLCR_A9_CPU_RST_CTRL_OFFSET	0x244 /* CPU Software Reset Control */
 #define SLCR_REBOOT_STATUS_OFFSET	0x258 /* PS Reboot Status */
+#define SLCR_PSS_IDCODE			0x530 /* PS IDCODE */
 
 #define SLCR_UNLOCK_MAGIC		0xDF0D
 #define SLCR_A9_CPU_CLKSTOP		0x10
 #define SLCR_A9_CPU_RST			0x1
+#define SLCR_PSS_IDCODE_DEVICE_SHIFT	12
+#define SLCR_PSS_IDCODE_DEVICE_MASK	0x1F
 
-void __iomem *zynq_slcr_base;
+static void __iomem *zynq_slcr_base;
+static struct regmap *zynq_slcr_regmap;
+
+/**
+ * zynq_slcr_write - Write to a register in SLCR block
+ *
+ * @val:	Value to write to the register
+ * @offset:	Register offset in SLCR block
+ *
+ * Return:	a negative value on error, 0 on success
+ */
+static int zynq_slcr_write(u32 val, u32 offset)
+{
+	if (!zynq_slcr_regmap) {
+		writel(val, zynq_slcr_base + offset);
+		return 0;
+	}
+
+	return regmap_write(zynq_slcr_regmap, offset, val);
+}
+
+/**
+ * zynq_slcr_read - Read a register in SLCR block
+ *
+ * @val:	Pointer to value to be read from SLCR
+ * @offset:	Register offset in SLCR block
+ *
+ * Return:	a negative value on error, 0 on success
+ */
+static int zynq_slcr_read(u32 *val, u32 offset)
+{
+	if (zynq_slcr_regmap)
+		return regmap_read(zynq_slcr_regmap, offset, val);
+
+	*val = readl(zynq_slcr_base + offset);
+
+	return 0;
+}
+
+/**
+ * zynq_slcr_unlock - Unlock SLCR registers
+ *
+ * Return:	a negative value on error, 0 on success
+ */
+static inline int zynq_slcr_unlock(void)
+{
+	zynq_slcr_write(SLCR_UNLOCK_MAGIC, SLCR_UNLOCK_OFFSET);
+
+	return 0;
+}
+
+/**
+ * zynq_slcr_get_device_id - Read device code id
+ *
+ * Return:	Device code id
+ */
+u32 zynq_slcr_get_device_id(void)
+{
+	u32 val;
+
+	zynq_slcr_read(&val, SLCR_PSS_IDCODE);
+	val >>= SLCR_PSS_IDCODE_DEVICE_SHIFT;
+	val &= SLCR_PSS_IDCODE_DEVICE_MASK;
+
+	return val;
+}
 
 /**
  * zynq_slcr_system_reset - Reset the entire system.
@@ -43,16 +113,16 @@ void zynq_slcr_system_reset(void)
 	 * Note that this seems to require raw i/o
 	 * functions or there's a lockup?
 	 */
-	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
+	zynq_slcr_unlock();
 
 	/*
 	 * Clear 0x0F000000 bits of reboot status register to workaround
 	 * the FSBL not loading the bitstream after soft-reboot
 	 * This is a temporary solution until we know more.
 	 */
-	reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
-	writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
-	writel(1, zynq_slcr_base + SLCR_PS_RST_CTRL_OFFSET);
+	zynq_slcr_read(&reboot, SLCR_REBOOT_STATUS_OFFSET);
+	zynq_slcr_write(reboot & 0xF0FFFFFF, SLCR_REBOOT_STATUS_OFFSET);
+	zynq_slcr_write(1, SLCR_PS_RST_CTRL_OFFSET);
 }
 
 /**
@@ -61,11 +131,13 @@ void zynq_slcr_system_reset(void)
  */
 void zynq_slcr_cpu_start(int cpu)
 {
-	u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	u32 reg;
+
+	zynq_slcr_read(&reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 	reg &= ~(SLCR_A9_CPU_RST << cpu);
-	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 	reg &= ~(SLCR_A9_CPU_CLKSTOP << cpu);
-	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 }
 
 /**
@@ -74,19 +146,40 @@ void zynq_slcr_cpu_start(int cpu)
  */
 void zynq_slcr_cpu_stop(int cpu)
 {
-	u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	u32 reg;
+
+	zynq_slcr_read(&reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 	reg |= (SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu;
-	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 }
 
 /**
- * zynq_slcr_init
- * Returns 0 on success, negative errno otherwise.
+ * zynq_slcr_init - Regular slcr driver init
+ *
+ * Return:	0 on success, negative errno otherwise.
  *
  * Called early during boot from platform code to remap SLCR area.
  */
 int __init zynq_slcr_init(void)
 {
+	zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr");
+	if (IS_ERR(zynq_slcr_regmap)) {
+		pr_err("%s: failed to find zynq-slcr\n", __func__);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/**
+ * zynq_early_slcr_init - Early slcr init function
+ *
+ * Return:	0 on success, negative errno otherwise.
+ *
+ * Called very early during boot from platform code to unlock SLCR.
+ */
+int __init zynq_early_slcr_init(void)
+{
 	struct device_node *np;
 
 	np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr");
@@ -101,13 +194,13 @@ int __init zynq_slcr_init(void)
 		BUG();
 	}
 
+	np->data = (__force void *)zynq_slcr_base;
+
 	/* unlock the SLCR so that registers can be changed */
-	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
+	zynq_slcr_unlock();
 
 	pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
 
-	zynq_clock_init(zynq_slcr_base);
-
 	of_node_put(np);
 
 	return 0;
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 1f8fed94c2a4..eda0dd0ab97b 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -264,7 +264,7 @@ config CPU_ARM1026
 
 # SA110
 config CPU_SA110
-	bool "Support StrongARM(R) SA-110 processor" if ARCH_RPC
+	bool
 	select CPU_32v3 if ARCH_RPC
 	select CPU_32v4 if !ARCH_RPC
 	select CPU_ABRT_EV4
@@ -420,33 +420,32 @@ config CPU_32v3
 	bool
 	select CPU_USE_DOMAINS if MMU
 	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
-	select TLS_REG_EMUL if SMP || !MMU
 	select NEED_KUSER_HELPERS
+	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v4
 	bool
 	select CPU_USE_DOMAINS if MMU
 	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
-	select TLS_REG_EMUL if SMP || !MMU
 	select NEED_KUSER_HELPERS
+	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v4T
 	bool
 	select CPU_USE_DOMAINS if MMU
 	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
-	select TLS_REG_EMUL if SMP || !MMU
 	select NEED_KUSER_HELPERS
+	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v5
 	bool
 	select CPU_USE_DOMAINS if MMU
 	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
-	select TLS_REG_EMUL if SMP || !MMU
 	select NEED_KUSER_HELPERS
+	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v6
 	bool
-	select CPU_USE_DOMAINS if CPU_V6 && MMU
 	select TLS_REG_EMUL if !CPU_32v6K && !MMU
 
 config CPU_32v6K
@@ -671,7 +670,7 @@ config ARM_VIRT_EXT
 
 config SWP_EMULATE
 	bool "Emulate SWP/SWPB instructions"
-	depends on !CPU_USE_DOMAINS && CPU_V7
+	depends on CPU_V7
 	default y if SMP
 	select HAVE_PROC_CPU if PROC_FS
 	help
@@ -855,7 +854,7 @@ config OUTER_CACHE_SYNC
 
 config CACHE_FEROCEON_L2
 	bool "Enable the Feroceon L2 cache controller"
-	depends on ARCH_KIRKWOOD || ARCH_MV78XX0
+	depends on ARCH_KIRKWOOD || ARCH_MV78XX0 || ARCH_MVEBU
 	default y
 	select OUTER_CACHE
 	help
@@ -898,6 +897,57 @@ config CACHE_PL310
 	  This option enables optimisations for the PL310 cache
 	  controller.
 
+config PL310_ERRATA_588369
+	bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
+	depends on CACHE_L2X0
+	help
+	   The PL310 L2 cache controller implements three types of Clean &
+	   Invalidate maintenance operations: by Physical Address
+	   (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
+	   They are architecturally defined to behave as the execution of a
+	   clean operation followed immediately by an invalidate operation,
+	   both performing to the same memory location. This functionality
+	   is not correctly implemented in PL310 as clean lines are not
+	   invalidated as a result of these operations.
+
+config PL310_ERRATA_727915
+	bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
+	depends on CACHE_L2X0
+	help
+	  PL310 implements the Clean & Invalidate by Way L2 cache maintenance
+	  operation (offset 0x7FC). This operation runs in background so that
+	  PL310 can handle normal accesses while it is in progress. Under very
+	  rare circumstances, due to this erratum, write data can be lost when
+	  PL310 treats a cacheable write transaction during a Clean &
+	  Invalidate by Way operation.
+
+config PL310_ERRATA_753970
+	bool "PL310 errata: cache sync operation may be faulty"
+	depends on CACHE_PL310
+	help
+	  This option enables the workaround for the 753970 PL310 (r3p0) erratum.
+
+	  Under some condition the effect of cache sync operation on
+	  the store buffer still remains when the operation completes.
+	  This means that the store buffer is always asked to drain and
+	  this prevents it from merging any further writes. The workaround
+	  is to replace the normal offset of cache sync operation (0x730)
+	  by another offset targeting an unmapped PL310 register 0x740.
+	  This has the same effect as the cache sync operation: store buffer
+	  drain and waiting for all buffers empty.
+
+config PL310_ERRATA_769419
+	bool "PL310 errata: no automatic Store Buffer drain"
+	depends on CACHE_L2X0
+	help
+	  On revisions of the PL310 prior to r3p2, the Store Buffer does
+	  not automatically drain. This can cause normal, non-cacheable
+	  writes to be retained when the memory system is idle, leading
+	  to suboptimal I/O performance for drivers using coherent DMA.
+	  This option adds a write barrier to the cpu_idle loop so that,
+	  on systems with an outer cache, the store buffer is drained
+	  explicitly.
+
 config CACHE_TAUROS2
 	bool "Enable the Tauros2 L2 cache controller"
 	depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4)
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 7f39ce2f841f..91da64de440f 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -95,7 +95,8 @@ obj-$(CONFIG_CPU_V7M)		+= proc-v7m.o
 AFLAGS_proc-v6.o	:=-Wa,-march=armv6
 AFLAGS_proc-v7.o	:=-Wa,-march=armv7-a
 
+obj-$(CONFIG_OUTER_CACHE)	+= l2c-common.o
 obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
-obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
+obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o l2c-l2x0-resume.o
 obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
 obj-$(CONFIG_CACHE_TAUROS2)	+= cache-tauros2.o
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 924036473b16..b8cb1a2688a0 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -28,6 +28,7 @@
 #include <asm/opcodes.h>
 
 #include "fault.h"
+#include "mm.h"
 
 /*
  * 32-bit misaligned trap handler (c) 1998 San Mehat (CCC) -July 1998
@@ -81,6 +82,7 @@ static unsigned long ai_word;
 static unsigned long ai_dword;
 static unsigned long ai_multi;
 static int ai_usermode;
+static unsigned long cr_no_alignment;
 
 core_param(alignment, ai_usermode, int, 0600);
 
@@ -91,7 +93,7 @@ core_param(alignment, ai_usermode, int, 0600);
 /* Return true if and only if the ARMv6 unaligned access model is in use. */
 static bool cpu_is_v6_unaligned(void)
 {
-	return cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U);
+	return cpu_architecture() >= CPU_ARCH_ARMv6 && get_cr() & CR_U;
 }
 
 static int safe_usermode(int new_usermode, bool warn)
@@ -949,6 +951,13 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	return 0;
 }
 
+static int __init noalign_setup(char *__unused)
+{
+	set_cr(__clear_cr(CR_A));
+	return 1;
+}
+__setup("noalign", noalign_setup);
+
 /*
  * This needs to be done after sysctl_init, otherwise sys/ will be
  * overwritten.  Actually, this shouldn't be in sys/ at all since
@@ -966,14 +975,12 @@ static int __init alignment_init(void)
 		return -ENOMEM;
 #endif
 
-#ifdef CONFIG_CPU_CP15
 	if (cpu_is_v6_unaligned()) {
-		cr_alignment &= ~CR_A;
-		cr_no_alignment &= ~CR_A;
-		set_cr(cr_alignment);
+		set_cr(__clear_cr(CR_A));
 		ai_usermode = safe_usermode(ai_usermode, false);
 	}
-#endif
+
+	cr_no_alignment = get_cr() & ~CR_A;
 
 	hook_fault_code(FAULT_CODE_ALIGNMENT, do_alignment, SIGBUS, BUS_ADRALN,
 			"alignment exception");
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 48bc3c0a87ce..e028a7f2ebcc 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -13,10 +13,15 @@
  */
 
 #include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/highmem.h>
+#include <linux/io.h>
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
-#include <plat/cache-feroceon-l2.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+
+#define L2_WRITETHROUGH_KIRKWOOD	BIT(4)
 
 /*
  * Low-level cache maintenance operations.
@@ -331,7 +336,9 @@ static void __init enable_l2(void)
 			enable_icache();
 		if (d)
 			enable_dcache();
-	}
+	} else
+		pr_err(FW_BUG
+		       "Feroceon L2: bootloader left the L2 cache on!\n");
 }
 
 void __init feroceon_l2_init(int __l2_wt_override)
@@ -343,10 +350,47 @@ void __init feroceon_l2_init(int __l2_wt_override)
 	outer_cache.inv_range = feroceon_l2_inv_range;
 	outer_cache.clean_range = feroceon_l2_clean_range;
 	outer_cache.flush_range = feroceon_l2_flush_range;
-	outer_cache.inv_all = l2_inv_all;
 
 	enable_l2();
 
 	printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n",
 			 l2_wt_override ? ", in WT override mode" : "");
 }
+#ifdef CONFIG_OF
+static const struct of_device_id feroceon_ids[] __initconst = {
+	{ .compatible = "marvell,kirkwood-cache"},
+	{ .compatible = "marvell,feroceon-cache"},
+	{}
+};
+
+int __init feroceon_of_init(void)
+{
+	struct device_node *node;
+	void __iomem *base;
+	bool l2_wt_override = false;
+	struct resource res;
+
+#if defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
+	l2_wt_override = true;
+#endif
+
+	node = of_find_matching_node(NULL, feroceon_ids);
+	if (node && of_device_is_compatible(node, "marvell,kirkwood-cache")) {
+		if (of_address_to_resource(node, 0, &res))
+			return -ENODEV;
+
+		base = ioremap(res.start, resource_size(&res));
+		if (!base)
+			return -ENOMEM;
+
+		if (l2_wt_override)
+			writel(readl(base) | L2_WRITETHROUGH_KIRKWOOD, base);
+		else
+			writel(readl(base) & ~L2_WRITETHROUGH_KIRKWOOD, base);
+	}
+
+	feroceon_l2_init(l2_wt_override);
+
+	return 0;
+}
+#endif
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 7abde2ce8973..efc5cabf70e0 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -16,18 +16,33 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
+#include <linux/cpu.h>
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/smp.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/cputype.h>
 #include <asm/hardware/cache-l2x0.h>
 #include "cache-tauros3.h"
 #include "cache-aurora-l2.h"
 
+struct l2c_init_data {
+	const char *type;
+	unsigned way_size_0;
+	unsigned num_lock;
+	void (*of_parse)(const struct device_node *, u32 *, u32 *);
+	void (*enable)(void __iomem *, u32, unsigned);
+	void (*fixup)(void __iomem *, u32, struct outer_cache_fns *);
+	void (*save)(void __iomem *);
+	struct outer_cache_fns outer_cache;
+};
+
 #define CACHE_LINE_SIZE		32
 
 static void __iomem *l2x0_base;
@@ -36,96 +51,116 @@ static u32 l2x0_way_mask;	/* Bitmask of active ways */
 static u32 l2x0_size;
 static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
 
-/* Aurora don't have the cache ID register available, so we have to
- * pass it though the device tree */
-static u32  cache_id_part_number_from_dt;
-
 struct l2x0_regs l2x0_saved_regs;
 
-struct l2x0_of_data {
-	void (*setup)(const struct device_node *, u32 *, u32 *);
-	void (*save)(void);
-	struct outer_cache_fns outer_cache;
-};
-
-static bool of_init = false;
-
-static inline void cache_wait_way(void __iomem *reg, unsigned long mask)
+/*
+ * Common code for all cache controllers.
+ */
+static inline void l2c_wait_mask(void __iomem *reg, unsigned long mask)
 {
 	/* wait for cache operation by line or way to complete */
 	while (readl_relaxed(reg) & mask)
 		cpu_relax();
 }
 
-#ifdef CONFIG_CACHE_PL310
-static inline void cache_wait(void __iomem *reg, unsigned long mask)
+/*
+ * By default, we write directly to secure registers.  Platforms must
+ * override this if they are running non-secure.
+ */
+static void l2c_write_sec(unsigned long val, void __iomem *base, unsigned reg)
 {
-	/* cache operations by line are atomic on PL310 */
+	if (val == readl_relaxed(base + reg))
+		return;
+	if (outer_cache.write_sec)
+		outer_cache.write_sec(val, reg);
+	else
+		writel_relaxed(val, base + reg);
 }
-#else
-#define cache_wait	cache_wait_way
-#endif
 
-static inline void cache_sync(void)
+/*
+ * This should only be called when we have a requirement that the
+ * register be written due to a work-around, as platforms running
+ * in non-secure mode may not be able to access this register.
+ */
+static inline void l2c_set_debug(void __iomem *base, unsigned long val)
 {
-	void __iomem *base = l2x0_base;
-
-	writel_relaxed(0, base + sync_reg_offset);
-	cache_wait(base + L2X0_CACHE_SYNC, 1);
+	l2c_write_sec(val, base, L2X0_DEBUG_CTRL);
 }
 
-static inline void l2x0_clean_line(unsigned long addr)
+static void __l2c_op_way(void __iomem *reg)
 {
-	void __iomem *base = l2x0_base;
-	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
+	writel_relaxed(l2x0_way_mask, reg);
+	l2c_wait_mask(reg, l2x0_way_mask);
 }
 
-static inline void l2x0_inv_line(unsigned long addr)
+static inline void l2c_unlock(void __iomem *base, unsigned num)
 {
-	void __iomem *base = l2x0_base;
-	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
+	unsigned i;
+
+	for (i = 0; i < num; i++) {
+		writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_D_BASE +
+			       i * L2X0_LOCKDOWN_STRIDE);
+		writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_I_BASE +
+			       i * L2X0_LOCKDOWN_STRIDE);
+	}
 }
 
-#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
-static inline void debug_writel(unsigned long val)
+/*
+ * Enable the L2 cache controller.  This function must only be
+ * called when the cache controller is known to be disabled.
+ */
+static void l2c_enable(void __iomem *base, u32 aux, unsigned num_lock)
 {
-	if (outer_cache.set_debug)
-		outer_cache.set_debug(val);
+	unsigned long flags;
+
+	l2c_write_sec(aux, base, L2X0_AUX_CTRL);
+
+	l2c_unlock(base, num_lock);
+
+	local_irq_save(flags);
+	__l2c_op_way(base + L2X0_INV_WAY);
+	writel_relaxed(0, base + sync_reg_offset);
+	l2c_wait_mask(base + sync_reg_offset, 1);
+	local_irq_restore(flags);
+
+	l2c_write_sec(L2X0_CTRL_EN, base, L2X0_CTRL);
 }
 
-static void pl310_set_debug(unsigned long val)
+static void l2c_disable(void)
 {
-	writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
+	void __iomem *base = l2x0_base;
+
+	outer_cache.flush_all();
+	l2c_write_sec(0, base, L2X0_CTRL);
+	dsb(st);
 }
-#else
-/* Optimised out for non-errata case */
-static inline void debug_writel(unsigned long val)
+
+#ifdef CONFIG_CACHE_PL310
+static inline void cache_wait(void __iomem *reg, unsigned long mask)
 {
+	/* cache operations by line are atomic on PL310 */
 }
-
-#define pl310_set_debug	NULL
+#else
+#define cache_wait	l2c_wait_mask
 #endif
 
-#ifdef CONFIG_PL310_ERRATA_588369
-static inline void l2x0_flush_line(unsigned long addr)
+static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
 
-	/* Clean by PA followed by Invalidate by PA */
-	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
-	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
+	writel_relaxed(0, base + sync_reg_offset);
+	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
-#else
 
-static inline void l2x0_flush_line(unsigned long addr)
+#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
+static inline void debug_writel(unsigned long val)
+{
+	l2c_set_debug(l2x0_base, val);
+}
+#else
+/* Optimised out for non-errata case */
+static inline void debug_writel(unsigned long val)
 {
-	void __iomem *base = l2x0_base;
-	cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
-	writel_relaxed(addr, base + L2X0_CLEAN_INV_LINE_PA);
 }
 #endif
 
@@ -141,8 +176,7 @@ static void l2x0_cache_sync(void)
 static void __l2x0_flush_all(void)
 {
 	debug_writel(0x03);
-	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
-	cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
+	__l2c_op_way(l2x0_base + L2X0_CLEAN_INV_WAY);
 	cache_sync();
 	debug_writel(0x00);
 }
@@ -157,275 +191,883 @@ static void l2x0_flush_all(void)
 	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
-static void l2x0_clean_all(void)
+static void l2x0_disable(void)
 {
 	unsigned long flags;
 
-	/* clean all ways */
 	raw_spin_lock_irqsave(&l2x0_lock, flags);
-	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_WAY);
-	cache_wait_way(l2x0_base + L2X0_CLEAN_WAY, l2x0_way_mask);
-	cache_sync();
+	__l2x0_flush_all();
+	l2c_write_sec(0, l2x0_base, L2X0_CTRL);
+	dsb(st);
 	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
-static void l2x0_inv_all(void)
+static void l2c_save(void __iomem *base)
 {
-	unsigned long flags;
+	l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+}
 
-	/* invalidate all ways */
-	raw_spin_lock_irqsave(&l2x0_lock, flags);
-	/* Invalidating when L2 is enabled is a nono */
-	BUG_ON(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN);
-	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
-	cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
-	cache_sync();
-	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+/*
+ * L2C-210 specific code.
+ *
+ * The L2C-2x0 PA, set/way and sync operations are atomic, but we must
+ * ensure that no background operation is running.  The way operations
+ * are all background tasks.
+ *
+ * While a background operation is in progress, any new operation is
+ * ignored (unspecified whether this causes an error.)  Thankfully, not
+ * used on SMP.
+ *
+ * Never has a different sync register other than L2X0_CACHE_SYNC, but
+ * we use sync_reg_offset here so we can share some of this with L2C-310.
+ */
+static void __l2c210_cache_sync(void __iomem *base)
+{
+	writel_relaxed(0, base + sync_reg_offset);
 }
 
-static void l2x0_inv_range(unsigned long start, unsigned long end)
+static void __l2c210_op_pa_range(void __iomem *reg, unsigned long start,
+	unsigned long end)
+{
+	while (start < end) {
+		writel_relaxed(start, reg);
+		start += CACHE_LINE_SIZE;
+	}
+}
+
+static void l2c210_inv_range(unsigned long start, unsigned long end)
 {
 	void __iomem *base = l2x0_base;
-	unsigned long flags;
 
-	raw_spin_lock_irqsave(&l2x0_lock, flags);
 	if (start & (CACHE_LINE_SIZE - 1)) {
 		start &= ~(CACHE_LINE_SIZE - 1);
-		debug_writel(0x03);
-		l2x0_flush_line(start);
-		debug_writel(0x00);
+		writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA);
 		start += CACHE_LINE_SIZE;
 	}
 
 	if (end & (CACHE_LINE_SIZE - 1)) {
 		end &= ~(CACHE_LINE_SIZE - 1);
-		debug_writel(0x03);
-		l2x0_flush_line(end);
-		debug_writel(0x00);
+		writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA);
 	}
 
+	__l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end);
+	__l2c210_cache_sync(base);
+}
+
+static void l2c210_clean_range(unsigned long start, unsigned long end)
+{
+	void __iomem *base = l2x0_base;
+
+	start &= ~(CACHE_LINE_SIZE - 1);
+	__l2c210_op_pa_range(base + L2X0_CLEAN_LINE_PA, start, end);
+	__l2c210_cache_sync(base);
+}
+
+static void l2c210_flush_range(unsigned long start, unsigned long end)
+{
+	void __iomem *base = l2x0_base;
+
+	start &= ~(CACHE_LINE_SIZE - 1);
+	__l2c210_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, start, end);
+	__l2c210_cache_sync(base);
+}
+
+static void l2c210_flush_all(void)
+{
+	void __iomem *base = l2x0_base;
+
+	BUG_ON(!irqs_disabled());
+
+	__l2c_op_way(base + L2X0_CLEAN_INV_WAY);
+	__l2c210_cache_sync(base);
+}
+
+static void l2c210_sync(void)
+{
+	__l2c210_cache_sync(l2x0_base);
+}
+
+static void l2c210_resume(void)
+{
+	void __iomem *base = l2x0_base;
+
+	if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN))
+		l2c_enable(base, l2x0_saved_regs.aux_ctrl, 1);
+}
+
+static const struct l2c_init_data l2c210_data __initconst = {
+	.type = "L2C-210",
+	.way_size_0 = SZ_8K,
+	.num_lock = 1,
+	.enable = l2c_enable,
+	.save = l2c_save,
+	.outer_cache = {
+		.inv_range = l2c210_inv_range,
+		.clean_range = l2c210_clean_range,
+		.flush_range = l2c210_flush_range,
+		.flush_all = l2c210_flush_all,
+		.disable = l2c_disable,
+		.sync = l2c210_sync,
+		.resume = l2c210_resume,
+	},
+};
+
+/*
+ * L2C-220 specific code.
+ *
+ * All operations are background operations: they have to be waited for.
+ * Conflicting requests generate a slave error (which will cause an
+ * imprecise abort.)  Never uses sync_reg_offset, so we hard-code the
+ * sync register here.
+ *
+ * However, we can re-use the l2c210_resume call.
+ */
+static inline void __l2c220_cache_sync(void __iomem *base)
+{
+	writel_relaxed(0, base + L2X0_CACHE_SYNC);
+	l2c_wait_mask(base + L2X0_CACHE_SYNC, 1);
+}
+
+static void l2c220_op_way(void __iomem *base, unsigned reg)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&l2x0_lock, flags);
+	__l2c_op_way(base + reg);
+	__l2c220_cache_sync(base);
+	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static unsigned long l2c220_op_pa_range(void __iomem *reg, unsigned long start,
+	unsigned long end, unsigned long flags)
+{
+	raw_spinlock_t *lock = &l2x0_lock;
+
 	while (start < end) {
 		unsigned long blk_end = start + min(end - start, 4096UL);
 
 		while (start < blk_end) {
-			l2x0_inv_line(start);
+			l2c_wait_mask(reg, 1);
+			writel_relaxed(start, reg);
 			start += CACHE_LINE_SIZE;
 		}
 
 		if (blk_end < end) {
-			raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-			raw_spin_lock_irqsave(&l2x0_lock, flags);
+			raw_spin_unlock_irqrestore(lock, flags);
+			raw_spin_lock_irqsave(lock, flags);
 		}
 	}
-	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	cache_sync();
-	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+
+	return flags;
 }
 
-static void l2x0_clean_range(unsigned long start, unsigned long end)
+static void l2c220_inv_range(unsigned long start, unsigned long end)
 {
 	void __iomem *base = l2x0_base;
 	unsigned long flags;
 
-	if ((end - start) >= l2x0_size) {
-		l2x0_clean_all();
-		return;
-	}
-
 	raw_spin_lock_irqsave(&l2x0_lock, flags);
-	start &= ~(CACHE_LINE_SIZE - 1);
-	while (start < end) {
-		unsigned long blk_end = start + min(end - start, 4096UL);
-
-		while (start < blk_end) {
-			l2x0_clean_line(start);
+	if ((start | end) & (CACHE_LINE_SIZE - 1)) {
+		if (start & (CACHE_LINE_SIZE - 1)) {
+			start &= ~(CACHE_LINE_SIZE - 1);
+			writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA);
 			start += CACHE_LINE_SIZE;
 		}
 
-		if (blk_end < end) {
-			raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-			raw_spin_lock_irqsave(&l2x0_lock, flags);
+		if (end & (CACHE_LINE_SIZE - 1)) {
+			end &= ~(CACHE_LINE_SIZE - 1);
+			l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
+			writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA);
 		}
 	}
-	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	cache_sync();
+
+	flags = l2c220_op_pa_range(base + L2X0_INV_LINE_PA,
+				   start, end, flags);
+	l2c_wait_mask(base + L2X0_INV_LINE_PA, 1);
+	__l2c220_cache_sync(base);
 	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
-static void l2x0_flush_range(unsigned long start, unsigned long end)
+static void l2c220_clean_range(unsigned long start, unsigned long end)
 {
 	void __iomem *base = l2x0_base;
 	unsigned long flags;
 
+	start &= ~(CACHE_LINE_SIZE - 1);
 	if ((end - start) >= l2x0_size) {
-		l2x0_flush_all();
+		l2c220_op_way(base, L2X0_CLEAN_WAY);
 		return;
 	}
 
 	raw_spin_lock_irqsave(&l2x0_lock, flags);
+	flags = l2c220_op_pa_range(base + L2X0_CLEAN_LINE_PA,
+				   start, end, flags);
+	l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
+	__l2c220_cache_sync(base);
+	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void l2c220_flush_range(unsigned long start, unsigned long end)
+{
+	void __iomem *base = l2x0_base;
+	unsigned long flags;
+
 	start &= ~(CACHE_LINE_SIZE - 1);
+	if ((end - start) >= l2x0_size) {
+		l2c220_op_way(base, L2X0_CLEAN_INV_WAY);
+		return;
+	}
+
+	raw_spin_lock_irqsave(&l2x0_lock, flags);
+	flags = l2c220_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA,
+				   start, end, flags);
+	l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
+	__l2c220_cache_sync(base);
+	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void l2c220_flush_all(void)
+{
+	l2c220_op_way(l2x0_base, L2X0_CLEAN_INV_WAY);
+}
+
+static void l2c220_sync(void)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&l2x0_lock, flags);
+	__l2c220_cache_sync(l2x0_base);
+	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void l2c220_enable(void __iomem *base, u32 aux, unsigned num_lock)
+{
+	/*
+	 * Always enable non-secure access to the lockdown registers -
+	 * we write to them as part of the L2C enable sequence so they
+	 * need to be accessible.
+	 */
+	aux |= L220_AUX_CTRL_NS_LOCKDOWN;
+
+	l2c_enable(base, aux, num_lock);
+}
+
+static const struct l2c_init_data l2c220_data = {
+	.type = "L2C-220",
+	.way_size_0 = SZ_8K,
+	.num_lock = 1,
+	.enable = l2c220_enable,
+	.save = l2c_save,
+	.outer_cache = {
+		.inv_range = l2c220_inv_range,
+		.clean_range = l2c220_clean_range,
+		.flush_range = l2c220_flush_range,
+		.flush_all = l2c220_flush_all,
+		.disable = l2c_disable,
+		.sync = l2c220_sync,
+		.resume = l2c210_resume,
+	},
+};
+
+/*
+ * L2C-310 specific code.
+ *
+ * Very similar to L2C-210, the PA, set/way and sync operations are atomic,
+ * and the way operations are all background tasks.  However, issuing an
+ * operation while a background operation is in progress results in a
+ * SLVERR response.  We can reuse:
+ *
+ *  __l2c210_cache_sync (using sync_reg_offset)
+ *  l2c210_sync
+ *  l2c210_inv_range (if 588369 is not applicable)
+ *  l2c210_clean_range
+ *  l2c210_flush_range (if 588369 is not applicable)
+ *  l2c210_flush_all (if 727915 is not applicable)
+ *
+ * Errata:
+ * 588369: PL310 R0P0->R1P0, fixed R2P0.
+ *	Affects: all clean+invalidate operations
+ *	clean and invalidate skips the invalidate step, so we need to issue
+ *	separate operations.  We also require the above debug workaround
+ *	enclosing this code fragment on affected parts.  On unaffected parts,
+ *	we must not use this workaround without the debug register writes
+ *	to avoid exposing a problem similar to 727915.
+ *
+ * 727915: PL310 R2P0->R3P0, fixed R3P1.
+ *	Affects: clean+invalidate by way
+ *	clean and invalidate by way runs in the background, and a store can
+ *	hit the line between the clean operation and invalidate operation,
+ *	resulting in the store being lost.
+ *
+ * 752271: PL310 R3P0->R3P1-50REL0, fixed R3P2.
+ *	Affects: 8x64-bit (double fill) line fetches
+ *	double fill line fetches can fail to cause dirty data to be evicted
+ *	from the cache before the new data overwrites the second line.
+ *
+ * 753970: PL310 R3P0, fixed R3P1.
+ *	Affects: sync
+ *	prevents merging writes after the sync operation, until another L2C
+ *	operation is performed (or a number of other conditions.)
+ *
+ * 769419: PL310 R0P0->R3P1, fixed R3P2.
+ *	Affects: store buffer
+ *	store buffer is not automatically drained.
+ */
+static void l2c310_inv_range_erratum(unsigned long start, unsigned long end)
+{
+	void __iomem *base = l2x0_base;
+
+	if ((start | end) & (CACHE_LINE_SIZE - 1)) {
+		unsigned long flags;
+
+		/* Erratum 588369 for both clean+invalidate operations */
+		raw_spin_lock_irqsave(&l2x0_lock, flags);
+		l2c_set_debug(base, 0x03);
+
+		if (start & (CACHE_LINE_SIZE - 1)) {
+			start &= ~(CACHE_LINE_SIZE - 1);
+			writel_relaxed(start, base + L2X0_CLEAN_LINE_PA);
+			writel_relaxed(start, base + L2X0_INV_LINE_PA);
+			start += CACHE_LINE_SIZE;
+		}
+
+		if (end & (CACHE_LINE_SIZE - 1)) {
+			end &= ~(CACHE_LINE_SIZE - 1);
+			writel_relaxed(end, base + L2X0_CLEAN_LINE_PA);
+			writel_relaxed(end, base + L2X0_INV_LINE_PA);
+		}
+
+		l2c_set_debug(base, 0x00);
+		raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+	}
+
+	__l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end);
+	__l2c210_cache_sync(base);
+}
+
+static void l2c310_flush_range_erratum(unsigned long start, unsigned long end)
+{
+	raw_spinlock_t *lock = &l2x0_lock;
+	unsigned long flags;
+	void __iomem *base = l2x0_base;
+
+	raw_spin_lock_irqsave(lock, flags);
 	while (start < end) {
 		unsigned long blk_end = start + min(end - start, 4096UL);
 
-		debug_writel(0x03);
+		l2c_set_debug(base, 0x03);
 		while (start < blk_end) {
-			l2x0_flush_line(start);
+			writel_relaxed(start, base + L2X0_CLEAN_LINE_PA);
+			writel_relaxed(start, base + L2X0_INV_LINE_PA);
 			start += CACHE_LINE_SIZE;
 		}
-		debug_writel(0x00);
+		l2c_set_debug(base, 0x00);
 
 		if (blk_end < end) {
-			raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-			raw_spin_lock_irqsave(&l2x0_lock, flags);
+			raw_spin_unlock_irqrestore(lock, flags);
+			raw_spin_lock_irqsave(lock, flags);
 		}
 	}
-	cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
-	cache_sync();
-	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+	raw_spin_unlock_irqrestore(lock, flags);
+	__l2c210_cache_sync(base);
 }
 
-static void l2x0_disable(void)
+static void l2c310_flush_all_erratum(void)
 {
+	void __iomem *base = l2x0_base;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&l2x0_lock, flags);
-	__l2x0_flush_all();
-	writel_relaxed(0, l2x0_base + L2X0_CTRL);
-	dsb(st);
+	l2c_set_debug(base, 0x03);
+	__l2c_op_way(base + L2X0_CLEAN_INV_WAY);
+	l2c_set_debug(base, 0x00);
+	__l2c210_cache_sync(base);
 	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
-static void l2x0_unlock(u32 cache_id)
+static void __init l2c310_save(void __iomem *base)
 {
-	int lockregs;
-	int i;
+	unsigned revision;
 
-	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
-	case L2X0_CACHE_ID_PART_L310:
-		lockregs = 8;
-		break;
-	case AURORA_CACHE_ID:
-		lockregs = 4;
+	l2c_save(base);
+
+	l2x0_saved_regs.tag_latency = readl_relaxed(base +
+		L310_TAG_LATENCY_CTRL);
+	l2x0_saved_regs.data_latency = readl_relaxed(base +
+		L310_DATA_LATENCY_CTRL);
+	l2x0_saved_regs.filter_end = readl_relaxed(base +
+		L310_ADDR_FILTER_END);
+	l2x0_saved_regs.filter_start = readl_relaxed(base +
+		L310_ADDR_FILTER_START);
+
+	revision = readl_relaxed(base + L2X0_CACHE_ID) &
+			L2X0_CACHE_ID_RTL_MASK;
+
+	/* From r2p0, there is Prefetch offset/control register */
+	if (revision >= L310_CACHE_ID_RTL_R2P0)
+		l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base +
+							L310_PREFETCH_CTRL);
+
+	/* From r3p0, there is Power control register */
+	if (revision >= L310_CACHE_ID_RTL_R3P0)
+		l2x0_saved_regs.pwr_ctrl = readl_relaxed(base +
+							L310_POWER_CTRL);
+}
+
+static void l2c310_resume(void)
+{
+	void __iomem *base = l2x0_base;
+
+	if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) {
+		unsigned revision;
+
+		/* restore pl310 setup */
+		writel_relaxed(l2x0_saved_regs.tag_latency,
+			       base + L310_TAG_LATENCY_CTRL);
+		writel_relaxed(l2x0_saved_regs.data_latency,
+			       base + L310_DATA_LATENCY_CTRL);
+		writel_relaxed(l2x0_saved_regs.filter_end,
+			       base + L310_ADDR_FILTER_END);
+		writel_relaxed(l2x0_saved_regs.filter_start,
+			       base + L310_ADDR_FILTER_START);
+
+		revision = readl_relaxed(base + L2X0_CACHE_ID) &
+				L2X0_CACHE_ID_RTL_MASK;
+
+		if (revision >= L310_CACHE_ID_RTL_R2P0)
+			l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base,
+				      L310_PREFETCH_CTRL);
+		if (revision >= L310_CACHE_ID_RTL_R3P0)
+			l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base,
+				      L310_POWER_CTRL);
+
+		l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8);
+
+		/* Re-enable full-line-of-zeros for Cortex-A9 */
+		if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO)
+			set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
+	}
+}
+
+static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, void *data)
+{
+	switch (act & ~CPU_TASKS_FROZEN) {
+	case CPU_STARTING:
+		set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
 		break;
-	default:
-		/* L210 and unknown types */
-		lockregs = 1;
+	case CPU_DYING:
+		set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1)));
 		break;
 	}
+	return NOTIFY_OK;
+}
 
-	for (i = 0; i < lockregs; i++) {
-		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
-			       i * L2X0_LOCKDOWN_STRIDE);
-		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
-			       i * L2X0_LOCKDOWN_STRIDE);
+static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock)
+{
+	unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK;
+	bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9;
+
+	if (rev >= L310_CACHE_ID_RTL_R2P0) {
+		if (cortex_a9) {
+			aux |= L310_AUX_CTRL_EARLY_BRESP;
+			pr_info("L2C-310 enabling early BRESP for Cortex-A9\n");
+		} else if (aux & L310_AUX_CTRL_EARLY_BRESP) {
+			pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n");
+			aux &= ~L310_AUX_CTRL_EARLY_BRESP;
+		}
+	}
+
+	if (cortex_a9) {
+		u32 aux_cur = readl_relaxed(base + L2X0_AUX_CTRL);
+		u32 acr = get_auxcr();
+
+		pr_debug("Cortex-A9 ACR=0x%08x\n", acr);
+
+		if (acr & BIT(3) && !(aux_cur & L310_AUX_CTRL_FULL_LINE_ZERO))
+			pr_err("L2C-310: full line of zeros enabled in Cortex-A9 but not L2C-310 - invalid\n");
+
+		if (aux & L310_AUX_CTRL_FULL_LINE_ZERO && !(acr & BIT(3)))
+			pr_err("L2C-310: enabling full line of zeros but not enabled in Cortex-A9\n");
+
+		if (!(aux & L310_AUX_CTRL_FULL_LINE_ZERO) && !outer_cache.write_sec) {
+			aux |= L310_AUX_CTRL_FULL_LINE_ZERO;
+			pr_info("L2C-310 full line of zeros enabled for Cortex-A9\n");
+		}
+	} else if (aux & (L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP)) {
+		pr_err("L2C-310: disabling Cortex-A9 specific feature bits\n");
+		aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP);
+	}
+
+	if (aux & (L310_AUX_CTRL_DATA_PREFETCH | L310_AUX_CTRL_INSTR_PREFETCH)) {
+		u32 prefetch = readl_relaxed(base + L310_PREFETCH_CTRL);
+
+		pr_info("L2C-310 %s%s prefetch enabled, offset %u lines\n",
+			aux & L310_AUX_CTRL_INSTR_PREFETCH ? "I" : "",
+			aux & L310_AUX_CTRL_DATA_PREFETCH ? "D" : "",
+			1 + (prefetch & L310_PREFETCH_CTRL_OFFSET_MASK));
+	}
+
+	/* r3p0 or later has power control register */
+	if (rev >= L310_CACHE_ID_RTL_R3P0) {
+		u32 power_ctrl;
+
+		l2c_write_sec(L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN,
+			      base, L310_POWER_CTRL);
+		power_ctrl = readl_relaxed(base + L310_POWER_CTRL);
+		pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n",
+			power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis",
+			power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis");
+	}
+
+	/*
+	 * Always enable non-secure access to the lockdown registers -
+	 * we write to them as part of the L2C enable sequence so they
+	 * need to be accessible.
+	 */
+	aux |= L310_AUX_CTRL_NS_LOCKDOWN;
+
+	l2c_enable(base, aux, num_lock);
+
+	if (aux & L310_AUX_CTRL_FULL_LINE_ZERO) {
+		set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
+		cpu_notifier(l2c310_cpu_enable_flz, 0);
 	}
 }
 
-void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
+static void __init l2c310_fixup(void __iomem *base, u32 cache_id,
+	struct outer_cache_fns *fns)
 {
-	u32 aux;
-	u32 cache_id;
-	u32 way_size = 0;
-	int ways;
-	int way_size_shift = L2X0_WAY_SIZE_SHIFT;
-	const char *type;
+	unsigned revision = cache_id & L2X0_CACHE_ID_RTL_MASK;
+	const char *errata[8];
+	unsigned n = 0;
+
+	if (IS_ENABLED(CONFIG_PL310_ERRATA_588369) &&
+	    revision < L310_CACHE_ID_RTL_R2P0 &&
+	    /* For bcm compatibility */
+	    fns->inv_range == l2c210_inv_range) {
+		fns->inv_range = l2c310_inv_range_erratum;
+		fns->flush_range = l2c310_flush_range_erratum;
+		errata[n++] = "588369";
+	}
 
-	l2x0_base = base;
-	if (cache_id_part_number_from_dt)
-		cache_id = cache_id_part_number_from_dt;
-	else
-		cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
-	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+	if (IS_ENABLED(CONFIG_PL310_ERRATA_727915) &&
+	    revision >= L310_CACHE_ID_RTL_R2P0 &&
+	    revision < L310_CACHE_ID_RTL_R3P1) {
+		fns->flush_all = l2c310_flush_all_erratum;
+		errata[n++] = "727915";
+	}
+
+	if (revision >= L310_CACHE_ID_RTL_R3P0 &&
+	    revision < L310_CACHE_ID_RTL_R3P2) {
+		u32 val = readl_relaxed(base + L310_PREFETCH_CTRL);
+		/* I don't think bit23 is required here... but iMX6 does so */
+		if (val & (BIT(30) | BIT(23))) {
+			val &= ~(BIT(30) | BIT(23));
+			l2c_write_sec(val, base, L310_PREFETCH_CTRL);
+			errata[n++] = "752271";
+		}
+	}
+
+	if (IS_ENABLED(CONFIG_PL310_ERRATA_753970) &&
+	    revision == L310_CACHE_ID_RTL_R3P0) {
+		sync_reg_offset = L2X0_DUMMY_REG;
+		errata[n++] = "753970";
+	}
+
+	if (IS_ENABLED(CONFIG_PL310_ERRATA_769419))
+		errata[n++] = "769419";
+
+	if (n) {
+		unsigned i;
 
+		pr_info("L2C-310 errat%s", n > 1 ? "a" : "um");
+		for (i = 0; i < n; i++)
+			pr_cont(" %s", errata[i]);
+		pr_cont(" enabled\n");
+	}
+}
+
+static void l2c310_disable(void)
+{
+	/*
+	 * If full-line-of-zeros is enabled, we must first disable it in the
+	 * Cortex-A9 auxiliary control register before disabling the L2 cache.
+	 */
+	if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO)
+		set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1)));
+
+	l2c_disable();
+}
+
+static const struct l2c_init_data l2c310_init_fns __initconst = {
+	.type = "L2C-310",
+	.way_size_0 = SZ_8K,
+	.num_lock = 8,
+	.enable = l2c310_enable,
+	.fixup = l2c310_fixup,
+	.save = l2c310_save,
+	.outer_cache = {
+		.inv_range = l2c210_inv_range,
+		.clean_range = l2c210_clean_range,
+		.flush_range = l2c210_flush_range,
+		.flush_all = l2c210_flush_all,
+		.disable = l2c310_disable,
+		.sync = l2c210_sync,
+		.resume = l2c310_resume,
+	},
+};
+
+static void __init __l2c_init(const struct l2c_init_data *data,
+	u32 aux_val, u32 aux_mask, u32 cache_id)
+{
+	struct outer_cache_fns fns;
+	unsigned way_size_bits, ways;
+	u32 aux, old_aux;
+
+	/*
+	 * Sanity check the aux values.  aux_mask is the bits we preserve
+	 * from reading the hardware register, and aux_val is the bits we
+	 * set.
+	 */
+	if (aux_val & aux_mask)
+		pr_alert("L2C: platform provided aux values permit register corruption.\n");
+
+	old_aux = aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
 	aux &= aux_mask;
 	aux |= aux_val;
 
+	if (old_aux != aux)
+		pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n",
+		        old_aux, aux);
+
 	/* Determine the number of ways */
 	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
 	case L2X0_CACHE_ID_PART_L310:
+		if ((aux_val | ~aux_mask) & (L2C_AUX_CTRL_WAY_SIZE_MASK | L310_AUX_CTRL_ASSOCIATIVITY_16))
+			pr_warn("L2C: DT/platform tries to modify or specify cache size\n");
 		if (aux & (1 << 16))
 			ways = 16;
 		else
 			ways = 8;
-		type = "L310";
-#ifdef CONFIG_PL310_ERRATA_753970
-		/* Unmapped register. */
-		sync_reg_offset = L2X0_DUMMY_REG;
-#endif
-		if ((cache_id & L2X0_CACHE_ID_RTL_MASK) <= L2X0_CACHE_ID_RTL_R3P0)
-			outer_cache.set_debug = pl310_set_debug;
 		break;
+
 	case L2X0_CACHE_ID_PART_L210:
+	case L2X0_CACHE_ID_PART_L220:
 		ways = (aux >> 13) & 0xf;
-		type = "L210";
 		break;
 
 	case AURORA_CACHE_ID:
-		sync_reg_offset = AURORA_SYNC_REG;
 		ways = (aux >> 13) & 0xf;
 		ways = 2 << ((ways + 1) >> 2);
-		way_size_shift = AURORA_WAY_SIZE_SHIFT;
-		type = "Aurora";
 		break;
+
 	default:
 		/* Assume unknown chips have 8 ways */
 		ways = 8;
-		type = "L2x0 series";
 		break;
 	}
 
 	l2x0_way_mask = (1 << ways) - 1;
 
 	/*
-	 * L2 cache Size =  Way size * Number of ways
+	 * way_size_0 is the size that a way_size value of zero would be
+	 * given the calculation: way_size = way_size_0 << way_size_bits.
+	 * So, if way_size_bits=0 is reserved, but way_size_bits=1 is 16k,
+	 * then way_size_0 would be 8k.
+	 *
+	 * L2 cache size = number of ways * way size.
 	 */
-	way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17;
-	way_size = 1 << (way_size + way_size_shift);
+	way_size_bits = (aux & L2C_AUX_CTRL_WAY_SIZE_MASK) >>
+			L2C_AUX_CTRL_WAY_SIZE_SHIFT;
+	l2x0_size = ways * (data->way_size_0 << way_size_bits);
 
-	l2x0_size = ways * way_size * SZ_1K;
+	fns = data->outer_cache;
+	fns.write_sec = outer_cache.write_sec;
+	if (data->fixup)
+		data->fixup(l2x0_base, cache_id, &fns);
 
 	/*
-	 * Check if l2x0 controller is already enabled.
-	 * If you are booting from non-secure mode
-	 * accessing the below registers will fault.
+	 * Check if l2x0 controller is already enabled.  If we are booting
+	 * in non-secure mode accessing the below registers will fault.
 	 */
-	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
-		/* Make sure that I&D is not locked down when starting */
-		l2x0_unlock(cache_id);
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN))
+		data->enable(l2x0_base, aux, data->num_lock);
 
-		/* l2x0 controller is disabled */
-		writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
+	outer_cache = fns;
 
-		l2x0_inv_all();
-
-		/* enable L2X0 */
-		writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL);
-	}
+	/*
+	 * It is strange to save the register state before initialisation,
+	 * but hey, this is what the DT implementations decided to do.
+	 */
+	if (data->save)
+		data->save(l2x0_base);
 
 	/* Re-read it in case some bits are reserved. */
 	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
 
-	/* Save the value for resuming. */
-	l2x0_saved_regs.aux_ctrl = aux;
+	pr_info("%s cache controller enabled, %d ways, %d kB\n",
+		data->type, ways, l2x0_size >> 10);
+	pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n",
+		data->type, cache_id, aux);
+}
+
+void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
+{
+	const struct l2c_init_data *data;
+	u32 cache_id;
+
+	l2x0_base = base;
+
+	cache_id = readl_relaxed(base + L2X0_CACHE_ID);
+
+	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
+	default:
+	case L2X0_CACHE_ID_PART_L210:
+		data = &l2c210_data;
+		break;
 
-	if (!of_init) {
-		outer_cache.inv_range = l2x0_inv_range;
-		outer_cache.clean_range = l2x0_clean_range;
-		outer_cache.flush_range = l2x0_flush_range;
-		outer_cache.sync = l2x0_cache_sync;
-		outer_cache.flush_all = l2x0_flush_all;
-		outer_cache.inv_all = l2x0_inv_all;
-		outer_cache.disable = l2x0_disable;
+	case L2X0_CACHE_ID_PART_L220:
+		data = &l2c220_data;
+		break;
+
+	case L2X0_CACHE_ID_PART_L310:
+		data = &l2c310_init_fns;
+		break;
 	}
 
-	pr_info("%s cache controller enabled\n", type);
-	pr_info("l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d kB\n",
-		ways, cache_id, aux, l2x0_size >> 10);
+	__l2c_init(data, aux_val, aux_mask, cache_id);
 }
 
 #ifdef CONFIG_OF
 static int l2_wt_override;
 
+/* Aurora don't have the cache ID register available, so we have to
+ * pass it though the device tree */
+static u32 cache_id_part_number_from_dt;
+
+static void __init l2x0_of_parse(const struct device_node *np,
+				 u32 *aux_val, u32 *aux_mask)
+{
+	u32 data[2] = { 0, 0 };
+	u32 tag = 0;
+	u32 dirty = 0;
+	u32 val = 0, mask = 0;
+
+	of_property_read_u32(np, "arm,tag-latency", &tag);
+	if (tag) {
+		mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK;
+		val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT;
+	}
+
+	of_property_read_u32_array(np, "arm,data-latency",
+				   data, ARRAY_SIZE(data));
+	if (data[0] && data[1]) {
+		mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK |
+			L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK;
+		val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) |
+		       ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT);
+	}
+
+	of_property_read_u32(np, "arm,dirty-latency", &dirty);
+	if (dirty) {
+		mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK;
+		val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
+	}
+
+	*aux_val &= ~mask;
+	*aux_val |= val;
+	*aux_mask &= ~mask;
+}
+
+static const struct l2c_init_data of_l2c210_data __initconst = {
+	.type = "L2C-210",
+	.way_size_0 = SZ_8K,
+	.num_lock = 1,
+	.of_parse = l2x0_of_parse,
+	.enable = l2c_enable,
+	.save = l2c_save,
+	.outer_cache = {
+		.inv_range   = l2c210_inv_range,
+		.clean_range = l2c210_clean_range,
+		.flush_range = l2c210_flush_range,
+		.flush_all   = l2c210_flush_all,
+		.disable     = l2c_disable,
+		.sync        = l2c210_sync,
+		.resume      = l2c210_resume,
+	},
+};
+
+static const struct l2c_init_data of_l2c220_data __initconst = {
+	.type = "L2C-220",
+	.way_size_0 = SZ_8K,
+	.num_lock = 1,
+	.of_parse = l2x0_of_parse,
+	.enable = l2c220_enable,
+	.save = l2c_save,
+	.outer_cache = {
+		.inv_range   = l2c220_inv_range,
+		.clean_range = l2c220_clean_range,
+		.flush_range = l2c220_flush_range,
+		.flush_all   = l2c220_flush_all,
+		.disable     = l2c_disable,
+		.sync        = l2c220_sync,
+		.resume      = l2c210_resume,
+	},
+};
+
+static void __init l2c310_of_parse(const struct device_node *np,
+	u32 *aux_val, u32 *aux_mask)
+{
+	u32 data[3] = { 0, 0, 0 };
+	u32 tag[3] = { 0, 0, 0 };
+	u32 filter[2] = { 0, 0 };
+
+	of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
+	if (tag[0] && tag[1] && tag[2])
+		writel_relaxed(
+			L310_LATENCY_CTRL_RD(tag[0] - 1) |
+			L310_LATENCY_CTRL_WR(tag[1] - 1) |
+			L310_LATENCY_CTRL_SETUP(tag[2] - 1),
+			l2x0_base + L310_TAG_LATENCY_CTRL);
+
+	of_property_read_u32_array(np, "arm,data-latency",
+				   data, ARRAY_SIZE(data));
+	if (data[0] && data[1] && data[2])
+		writel_relaxed(
+			L310_LATENCY_CTRL_RD(data[0] - 1) |
+			L310_LATENCY_CTRL_WR(data[1] - 1) |
+			L310_LATENCY_CTRL_SETUP(data[2] - 1),
+			l2x0_base + L310_DATA_LATENCY_CTRL);
+
+	of_property_read_u32_array(np, "arm,filter-ranges",
+				   filter, ARRAY_SIZE(filter));
+	if (filter[1]) {
+		writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M),
+			       l2x0_base + L310_ADDR_FILTER_END);
+		writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN,
+			       l2x0_base + L310_ADDR_FILTER_START);
+	}
+}
+
+static const struct l2c_init_data of_l2c310_data __initconst = {
+	.type = "L2C-310",
+	.way_size_0 = SZ_8K,
+	.num_lock = 8,
+	.of_parse = l2c310_of_parse,
+	.enable = l2c310_enable,
+	.fixup = l2c310_fixup,
+	.save  = l2c310_save,
+	.outer_cache = {
+		.inv_range   = l2c210_inv_range,
+		.clean_range = l2c210_clean_range,
+		.flush_range = l2c210_flush_range,
+		.flush_all   = l2c210_flush_all,
+		.disable     = l2c310_disable,
+		.sync        = l2c210_sync,
+		.resume      = l2c310_resume,
+	},
+};
+
 /*
  * Note that the end addresses passed to Linux primitives are
  * noninclusive, while the hardware cache range operations use
@@ -524,6 +1166,100 @@ static void aurora_flush_range(unsigned long start, unsigned long end)
 	}
 }
 
+static void aurora_save(void __iomem *base)
+{
+	l2x0_saved_regs.ctrl = readl_relaxed(base + L2X0_CTRL);
+	l2x0_saved_regs.aux_ctrl = readl_relaxed(base + L2X0_AUX_CTRL);
+}
+
+static void aurora_resume(void)
+{
+	void __iomem *base = l2x0_base;
+
+	if (!(readl(base + L2X0_CTRL) & L2X0_CTRL_EN)) {
+		writel_relaxed(l2x0_saved_regs.aux_ctrl, base + L2X0_AUX_CTRL);
+		writel_relaxed(l2x0_saved_regs.ctrl, base + L2X0_CTRL);
+	}
+}
+
+/*
+ * For Aurora cache in no outer mode, enable via the CP15 coprocessor
+ * broadcasting of cache commands to L2.
+ */
+static void __init aurora_enable_no_outer(void __iomem *base, u32 aux,
+	unsigned num_lock)
+{
+	u32 u;
+
+	asm volatile("mrc p15, 1, %0, c15, c2, 0" : "=r" (u));
+	u |= AURORA_CTRL_FW;		/* Set the FW bit */
+	asm volatile("mcr p15, 1, %0, c15, c2, 0" : : "r" (u));
+
+	isb();
+
+	l2c_enable(base, aux, num_lock);
+}
+
+static void __init aurora_fixup(void __iomem *base, u32 cache_id,
+	struct outer_cache_fns *fns)
+{
+	sync_reg_offset = AURORA_SYNC_REG;
+}
+
+static void __init aurora_of_parse(const struct device_node *np,
+				u32 *aux_val, u32 *aux_mask)
+{
+	u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU;
+	u32 mask =  AURORA_ACR_REPLACEMENT_MASK;
+
+	of_property_read_u32(np, "cache-id-part",
+			&cache_id_part_number_from_dt);
+
+	/* Determine and save the write policy */
+	l2_wt_override = of_property_read_bool(np, "wt-override");
+
+	if (l2_wt_override) {
+		val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY;
+		mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK;
+	}
+
+	*aux_val &= ~mask;
+	*aux_val |= val;
+	*aux_mask &= ~mask;
+}
+
+static const struct l2c_init_data of_aurora_with_outer_data __initconst = {
+	.type = "Aurora",
+	.way_size_0 = SZ_4K,
+	.num_lock = 4,
+	.of_parse = aurora_of_parse,
+	.enable = l2c_enable,
+	.fixup = aurora_fixup,
+	.save  = aurora_save,
+	.outer_cache = {
+		.inv_range   = aurora_inv_range,
+		.clean_range = aurora_clean_range,
+		.flush_range = aurora_flush_range,
+		.flush_all   = l2x0_flush_all,
+		.disable     = l2x0_disable,
+		.sync        = l2x0_cache_sync,
+		.resume      = aurora_resume,
+	},
+};
+
+static const struct l2c_init_data of_aurora_no_outer_data __initconst = {
+	.type = "Aurora",
+	.way_size_0 = SZ_4K,
+	.num_lock = 4,
+	.of_parse = aurora_of_parse,
+	.enable = aurora_enable_no_outer,
+	.fixup = aurora_fixup,
+	.save  = aurora_save,
+	.outer_cache = {
+		.resume      = aurora_resume,
+	},
+};
+
 /*
  * For certain Broadcom SoCs, depending on the address range, different offsets
  * need to be added to the address before passing it to L2 for
@@ -588,16 +1324,16 @@ static void bcm_inv_range(unsigned long start, unsigned long end)
 
 	/* normal case, no cross section between start and end */
 	if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
-		l2x0_inv_range(new_start, new_end);
+		l2c210_inv_range(new_start, new_end);
 		return;
 	}
 
 	/* They cross sections, so it can only be a cross from section
 	 * 2 to section 3
 	 */
-	l2x0_inv_range(new_start,
+	l2c210_inv_range(new_start,
 		bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
-	l2x0_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
+	l2c210_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
 		new_end);
 }
 
@@ -610,26 +1346,21 @@ static void bcm_clean_range(unsigned long start, unsigned long end)
 	if (unlikely(end <= start))
 		return;
 
-	if ((end - start) >= l2x0_size) {
-		l2x0_clean_all();
-		return;
-	}
-
 	new_start = bcm_l2_phys_addr(start);
 	new_end = bcm_l2_phys_addr(end);
 
 	/* normal case, no cross section between start and end */
 	if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
-		l2x0_clean_range(new_start, new_end);
+		l2c210_clean_range(new_start, new_end);
 		return;
 	}
 
 	/* They cross sections, so it can only be a cross from section
 	 * 2 to section 3
 	 */
-	l2x0_clean_range(new_start,
+	l2c210_clean_range(new_start,
 		bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
-	l2x0_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
+	l2c210_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
 		new_end);
 }
 
@@ -643,7 +1374,7 @@ static void bcm_flush_range(unsigned long start, unsigned long end)
 		return;
 
 	if ((end - start) >= l2x0_size) {
-		l2x0_flush_all();
+		outer_cache.flush_all();
 		return;
 	}
 
@@ -652,283 +1383,67 @@ static void bcm_flush_range(unsigned long start, unsigned long end)
 
 	/* normal case, no cross section between start and end */
 	if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
-		l2x0_flush_range(new_start, new_end);
+		l2c210_flush_range(new_start, new_end);
 		return;
 	}
 
 	/* They cross sections, so it can only be a cross from section
 	 * 2 to section 3
 	 */
-	l2x0_flush_range(new_start,
+	l2c210_flush_range(new_start,
 		bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
-	l2x0_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
+	l2c210_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
 		new_end);
 }
 
-static void __init l2x0_of_setup(const struct device_node *np,
-				 u32 *aux_val, u32 *aux_mask)
-{
-	u32 data[2] = { 0, 0 };
-	u32 tag = 0;
-	u32 dirty = 0;
-	u32 val = 0, mask = 0;
-
-	of_property_read_u32(np, "arm,tag-latency", &tag);
-	if (tag) {
-		mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK;
-		val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT;
-	}
-
-	of_property_read_u32_array(np, "arm,data-latency",
-				   data, ARRAY_SIZE(data));
-	if (data[0] && data[1]) {
-		mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK |
-			L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK;
-		val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) |
-		       ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT);
-	}
-
-	of_property_read_u32(np, "arm,dirty-latency", &dirty);
-	if (dirty) {
-		mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK;
-		val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
-	}
-
-	*aux_val &= ~mask;
-	*aux_val |= val;
-	*aux_mask &= ~mask;
-}
-
-static void __init pl310_of_setup(const struct device_node *np,
-				  u32 *aux_val, u32 *aux_mask)
-{
-	u32 data[3] = { 0, 0, 0 };
-	u32 tag[3] = { 0, 0, 0 };
-	u32 filter[2] = { 0, 0 };
-
-	of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
-	if (tag[0] && tag[1] && tag[2])
-		writel_relaxed(
-			((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
-			((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
-			((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
-			l2x0_base + L2X0_TAG_LATENCY_CTRL);
-
-	of_property_read_u32_array(np, "arm,data-latency",
-				   data, ARRAY_SIZE(data));
-	if (data[0] && data[1] && data[2])
-		writel_relaxed(
-			((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
-			((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
-			((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
-			l2x0_base + L2X0_DATA_LATENCY_CTRL);
-
-	of_property_read_u32_array(np, "arm,filter-ranges",
-				   filter, ARRAY_SIZE(filter));
-	if (filter[1]) {
-		writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M),
-			       l2x0_base + L2X0_ADDR_FILTER_END);
-		writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN,
-			       l2x0_base + L2X0_ADDR_FILTER_START);
-	}
-}
-
-static void __init pl310_save(void)
-{
-	u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) &
-		L2X0_CACHE_ID_RTL_MASK;
-
-	l2x0_saved_regs.tag_latency = readl_relaxed(l2x0_base +
-		L2X0_TAG_LATENCY_CTRL);
-	l2x0_saved_regs.data_latency = readl_relaxed(l2x0_base +
-		L2X0_DATA_LATENCY_CTRL);
-	l2x0_saved_regs.filter_end = readl_relaxed(l2x0_base +
-		L2X0_ADDR_FILTER_END);
-	l2x0_saved_regs.filter_start = readl_relaxed(l2x0_base +
-		L2X0_ADDR_FILTER_START);
-
-	if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) {
-		/*
-		 * From r2p0, there is Prefetch offset/control register
-		 */
-		l2x0_saved_regs.prefetch_ctrl = readl_relaxed(l2x0_base +
-			L2X0_PREFETCH_CTRL);
-		/*
-		 * From r3p0, there is Power control register
-		 */
-		if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0)
-			l2x0_saved_regs.pwr_ctrl = readl_relaxed(l2x0_base +
-				L2X0_POWER_CTRL);
-	}
-}
+/* Broadcom L2C-310 start from ARMs R3P2 or later, and require no fixups */
+static const struct l2c_init_data of_bcm_l2x0_data __initconst = {
+	.type = "BCM-L2C-310",
+	.way_size_0 = SZ_8K,
+	.num_lock = 8,
+	.of_parse = l2c310_of_parse,
+	.enable = l2c310_enable,
+	.save  = l2c310_save,
+	.outer_cache = {
+		.inv_range   = bcm_inv_range,
+		.clean_range = bcm_clean_range,
+		.flush_range = bcm_flush_range,
+		.flush_all   = l2c210_flush_all,
+		.disable     = l2c310_disable,
+		.sync        = l2c210_sync,
+		.resume      = l2c310_resume,
+	},
+};
 
-static void aurora_save(void)
+static void __init tauros3_save(void __iomem *base)
 {
-	l2x0_saved_regs.ctrl = readl_relaxed(l2x0_base + L2X0_CTRL);
-	l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
-}
+	l2c_save(base);
 
-static void __init tauros3_save(void)
-{
 	l2x0_saved_regs.aux2_ctrl =
-		readl_relaxed(l2x0_base + TAUROS3_AUX2_CTRL);
+		readl_relaxed(base + TAUROS3_AUX2_CTRL);
 	l2x0_saved_regs.prefetch_ctrl =
-		readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
-}
-
-static void l2x0_resume(void)
-{
-	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
-		/* restore aux ctrl and enable l2 */
-		l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID));
-
-		writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base +
-			L2X0_AUX_CTRL);
-
-		l2x0_inv_all();
-
-		writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL);
-	}
-}
-
-static void pl310_resume(void)
-{
-	u32 l2x0_revision;
-
-	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
-		/* restore pl310 setup */
-		writel_relaxed(l2x0_saved_regs.tag_latency,
-			l2x0_base + L2X0_TAG_LATENCY_CTRL);
-		writel_relaxed(l2x0_saved_regs.data_latency,
-			l2x0_base + L2X0_DATA_LATENCY_CTRL);
-		writel_relaxed(l2x0_saved_regs.filter_end,
-			l2x0_base + L2X0_ADDR_FILTER_END);
-		writel_relaxed(l2x0_saved_regs.filter_start,
-			l2x0_base + L2X0_ADDR_FILTER_START);
-
-		l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) &
-			L2X0_CACHE_ID_RTL_MASK;
-
-		if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) {
-			writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
-				l2x0_base + L2X0_PREFETCH_CTRL);
-			if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0)
-				writel_relaxed(l2x0_saved_regs.pwr_ctrl,
-					l2x0_base + L2X0_POWER_CTRL);
-		}
-	}
-
-	l2x0_resume();
-}
-
-static void aurora_resume(void)
-{
-	if (!(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
-		writel_relaxed(l2x0_saved_regs.aux_ctrl,
-				l2x0_base + L2X0_AUX_CTRL);
-		writel_relaxed(l2x0_saved_regs.ctrl, l2x0_base + L2X0_CTRL);
-	}
+		readl_relaxed(base + L310_PREFETCH_CTRL);
 }
 
 static void tauros3_resume(void)
 {
-	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
+	void __iomem *base = l2x0_base;
+
+	if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) {
 		writel_relaxed(l2x0_saved_regs.aux2_ctrl,
-			       l2x0_base + TAUROS3_AUX2_CTRL);
+			       base + TAUROS3_AUX2_CTRL);
 		writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
-			       l2x0_base + L2X0_PREFETCH_CTRL);
-	}
+			       base + L310_PREFETCH_CTRL);
 
-	l2x0_resume();
-}
-
-static void __init aurora_broadcast_l2_commands(void)
-{
-	__u32 u;
-	/* Enable Broadcasting of cache commands to L2*/
-	__asm__ __volatile__("mrc p15, 1, %0, c15, c2, 0" : "=r"(u));
-	u |= AURORA_CTRL_FW;		/* Set the FW bit */
-	__asm__ __volatile__("mcr p15, 1, %0, c15, c2, 0\n" : : "r"(u));
-	isb();
-}
-
-static void __init aurora_of_setup(const struct device_node *np,
-				u32 *aux_val, u32 *aux_mask)
-{
-	u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU;
-	u32 mask =  AURORA_ACR_REPLACEMENT_MASK;
-
-	of_property_read_u32(np, "cache-id-part",
-			&cache_id_part_number_from_dt);
-
-	/* Determine and save the write policy */
-	l2_wt_override = of_property_read_bool(np, "wt-override");
-
-	if (l2_wt_override) {
-		val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY;
-		mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK;
+		l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8);
 	}
-
-	*aux_val &= ~mask;
-	*aux_val |= val;
-	*aux_mask &= ~mask;
 }
 
-static const struct l2x0_of_data pl310_data = {
-	.setup = pl310_of_setup,
-	.save  = pl310_save,
-	.outer_cache = {
-		.resume      = pl310_resume,
-		.inv_range   = l2x0_inv_range,
-		.clean_range = l2x0_clean_range,
-		.flush_range = l2x0_flush_range,
-		.sync        = l2x0_cache_sync,
-		.flush_all   = l2x0_flush_all,
-		.inv_all     = l2x0_inv_all,
-		.disable     = l2x0_disable,
-	},
-};
-
-static const struct l2x0_of_data l2x0_data = {
-	.setup = l2x0_of_setup,
-	.save  = NULL,
-	.outer_cache = {
-		.resume      = l2x0_resume,
-		.inv_range   = l2x0_inv_range,
-		.clean_range = l2x0_clean_range,
-		.flush_range = l2x0_flush_range,
-		.sync        = l2x0_cache_sync,
-		.flush_all   = l2x0_flush_all,
-		.inv_all     = l2x0_inv_all,
-		.disable     = l2x0_disable,
-	},
-};
-
-static const struct l2x0_of_data aurora_with_outer_data = {
-	.setup = aurora_of_setup,
-	.save  = aurora_save,
-	.outer_cache = {
-		.resume      = aurora_resume,
-		.inv_range   = aurora_inv_range,
-		.clean_range = aurora_clean_range,
-		.flush_range = aurora_flush_range,
-		.sync        = l2x0_cache_sync,
-		.flush_all   = l2x0_flush_all,
-		.inv_all     = l2x0_inv_all,
-		.disable     = l2x0_disable,
-	},
-};
-
-static const struct l2x0_of_data aurora_no_outer_data = {
-	.setup = aurora_of_setup,
-	.save  = aurora_save,
-	.outer_cache = {
-		.resume      = aurora_resume,
-	},
-};
-
-static const struct l2x0_of_data tauros3_data = {
-	.setup = NULL,
+static const struct l2c_init_data of_tauros3_data __initconst = {
+	.type = "Tauros3",
+	.way_size_0 = SZ_8K,
+	.num_lock = 8,
+	.enable = l2c_enable,
 	.save  = tauros3_save,
 	/* Tauros3 broadcasts L1 cache operations to L2 */
 	.outer_cache = {
@@ -936,43 +1451,26 @@ static const struct l2x0_of_data tauros3_data = {
 	},
 };
 
-static const struct l2x0_of_data bcm_l2x0_data = {
-	.setup = pl310_of_setup,
-	.save  = pl310_save,
-	.outer_cache = {
-		.resume      = pl310_resume,
-		.inv_range   = bcm_inv_range,
-		.clean_range = bcm_clean_range,
-		.flush_range = bcm_flush_range,
-		.sync        = l2x0_cache_sync,
-		.flush_all   = l2x0_flush_all,
-		.inv_all     = l2x0_inv_all,
-		.disable     = l2x0_disable,
-	},
-};
-
+#define L2C_ID(name, fns) { .compatible = name, .data = (void *)&fns }
 static const struct of_device_id l2x0_ids[] __initconst = {
-	{ .compatible = "arm,l210-cache", .data = (void *)&l2x0_data },
-	{ .compatible = "arm,l220-cache", .data = (void *)&l2x0_data },
-	{ .compatible = "arm,pl310-cache", .data = (void *)&pl310_data },
-	{ .compatible = "bcm,bcm11351-a2-pl310-cache", /* deprecated name */
-	  .data = (void *)&bcm_l2x0_data},
-	{ .compatible = "brcm,bcm11351-a2-pl310-cache",
-	  .data = (void *)&bcm_l2x0_data},
-	{ .compatible = "marvell,aurora-outer-cache",
-	  .data = (void *)&aurora_with_outer_data},
-	{ .compatible = "marvell,aurora-system-cache",
-	  .data = (void *)&aurora_no_outer_data},
-	{ .compatible = "marvell,tauros3-cache",
-	  .data = (void *)&tauros3_data },
+	L2C_ID("arm,l210-cache", of_l2c210_data),
+	L2C_ID("arm,l220-cache", of_l2c220_data),
+	L2C_ID("arm,pl310-cache", of_l2c310_data),
+	L2C_ID("brcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data),
+	L2C_ID("marvell,aurora-outer-cache", of_aurora_with_outer_data),
+	L2C_ID("marvell,aurora-system-cache", of_aurora_no_outer_data),
+	L2C_ID("marvell,tauros3-cache", of_tauros3_data),
+	/* Deprecated IDs */
+	L2C_ID("bcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data),
 	{}
 };
 
 int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 {
+	const struct l2c_init_data *data;
 	struct device_node *np;
-	const struct l2x0_of_data *data;
 	struct resource res;
+	u32 cache_id, old_aux;
 
 	np = of_find_matching_node(NULL, l2x0_ids);
 	if (!np)
@@ -989,23 +1487,29 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 
 	data = of_match_node(l2x0_ids, np)->data;
 
-	/* L2 configuration can only be changed if the cache is disabled */
-	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
-		if (data->setup)
-			data->setup(np, &aux_val, &aux_mask);
-
-		/* For aurora cache in no outer mode select the
-		 * correct mode using the coprocessor*/
-		if (data == &aurora_no_outer_data)
-			aurora_broadcast_l2_commands();
+	old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+	if (old_aux != ((old_aux & aux_mask) | aux_val)) {
+		pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n",
+		        old_aux, (old_aux & aux_mask) | aux_val);
+	} else if (aux_mask != ~0U && aux_val != 0) {
+		pr_alert("L2C: platform provided aux values match the hardware, so have no effect.  Please remove them.\n");
 	}
 
-	if (data->save)
-		data->save();
+	/* All L2 caches are unified, so this property should be specified */
+	if (!of_property_read_bool(np, "cache-unified"))
+		pr_err("L2C: device tree omits to specify unified cache\n");
+
+	/* L2 configuration can only be changed if the cache is disabled */
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN))
+		if (data->of_parse)
+			data->of_parse(np, &aux_val, &aux_mask);
+
+	if (cache_id_part_number_from_dt)
+		cache_id = cache_id_part_number_from_dt;
+	else
+		cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
 
-	of_init = true;
-	memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache));
-	l2x0_init(l2x0_base, aux_val, aux_mask);
+	__l2c_init(data, aux_val, aux_mask, cache_id);
 
 	return 0;
 }
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
index 1be0f4e5e6eb..b273739e6359 100644
--- a/arch/arm/mm/cache-tauros2.c
+++ b/arch/arm/mm/cache-tauros2.c
@@ -33,7 +33,7 @@
  * outer cache operations into the kernel image if the kernel has been
  * configured to support a pre-v7 CPU.
  */
-#if __LINUX_ARM_ARCH__ < 7
+#ifdef CONFIG_CPU_32v5
 /*
  * Low-level cache maintenance operations.
  */
@@ -229,33 +229,6 @@ static void __init tauros2_internal_init(unsigned int features)
 	}
 #endif
 
-#ifdef CONFIG_CPU_32v6
-	/*
-	 * Check whether this CPU lacks support for the v7 hierarchical
-	 * cache ops.  (PJ4 is in its v6 personality mode if the MMFR3
-	 * register indicates no support for the v7 hierarchical cache
-	 * ops.)
-	 */
-	if (cpuid_scheme() && (read_mmfr3() & 0xf) == 0) {
-		/*
-		 * When Tauros2 is used in an ARMv6 system, the L2
-		 * enable bit is in the ARMv6 ARM-mandated position
-		 * (bit [26] of the System Control Register).
-		 */
-		if (!(get_cr() & 0x04000000)) {
-			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
-			adjust_cr(0x04000000, 0x04000000);
-		}
-
-		mode = "ARMv6";
-		outer_cache.inv_range = tauros2_inv_range;
-		outer_cache.clean_range = tauros2_clean_range;
-		outer_cache.flush_range = tauros2_flush_range;
-		outer_cache.disable = tauros2_disable;
-		outer_cache.resume = tauros2_resume;
-	}
-#endif
-
 #ifdef CONFIG_CPU_32v7
 	/*
 	 * Check whether this CPU has support for the v7 hierarchical
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 778bcf88ee79..615c99e38ba1 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -59,7 +59,7 @@ ENTRY(v7_invalidate_l1)
        bgt     2b
        cmp     r2, #0
        bgt     1b
-       dsb
+       dsb     st
        isb
        mov     pc, lr
 ENDPROC(v7_invalidate_l1)
@@ -166,7 +166,7 @@ skip:
 finished:
 	mov	r10, #0				@ swith back to cache level 0
 	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
-	dsb
+	dsb	st
 	isb
 	mov	pc, lr
 ENDPROC(v7_flush_dcache_all)
@@ -335,7 +335,7 @@ ENTRY(v7_flush_kern_dcache_area)
 	add	r0, r0, r2
 	cmp	r0, r1
 	blo	1b
-	dsb
+	dsb	st
 	mov	pc, lr
 ENDPROC(v7_flush_kern_dcache_area)
 
@@ -368,7 +368,7 @@ v7_dma_inv_range:
 	add	r0, r0, r2
 	cmp	r0, r1
 	blo	1b
-	dsb
+	dsb	st
 	mov	pc, lr
 ENDPROC(v7_dma_inv_range)
 
@@ -390,7 +390,7 @@ v7_dma_clean_range:
 	add	r0, r0, r2
 	cmp	r0, r1
 	blo	1b
-	dsb
+	dsb	st
 	mov	pc, lr
 ENDPROC(v7_dma_clean_range)
 
@@ -412,7 +412,7 @@ ENTRY(v7_dma_flush_range)
 	add	r0, r0, r2
 	cmp	r0, r1
 	blo	1b
-	dsb
+	dsb	st
 	mov	pc, lr
 ENDPROC(v7_dma_flush_range)
 
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 11b3914660d2..4c88935654ca 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -284,9 +284,6 @@ static void __dma_free_buffer(struct page *page, size_t size)
 }
 
 #ifdef CONFIG_MMU
-#ifdef CONFIG_HUGETLB_PAGE
-#warning ARM Coherent DMA allocator does not (yet) support huge TLB
-#endif
 
 static void *__alloc_from_contiguous(struct device *dev, size_t size,
 				     pgprot_t prot, struct page **ret_page,
@@ -393,7 +390,7 @@ static int __init atomic_pool_init(void)
 	if (!pages)
 		goto no_pages;
 
-	if (IS_ENABLED(CONFIG_DMA_CMA))
+	if (dev_get_cma_area(NULL))
 		ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
 					      atomic_pool_init);
 	else
@@ -704,7 +701,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 		addr = __alloc_simple_buffer(dev, size, gfp, &page);
 	else if (!(gfp & __GFP_WAIT))
 		addr = __alloc_from_pool(size, &page);
-	else if (!IS_ENABLED(CONFIG_DMA_CMA))
+	else if (!dev_get_cma_area(dev))
 		addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
 	else
 		addr = __alloc_from_contiguous(dev, size, prot, &page, caller);
@@ -793,7 +790,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
 		__dma_free_buffer(page, size);
 	} else if (__free_from_pool(cpu_addr, size)) {
 		return;
-	} else if (!IS_ENABLED(CONFIG_DMA_CMA)) {
+	} else if (!dev_get_cma_area(dev)) {
 		__dma_free_remap(cpu_addr, size);
 		__dma_free_buffer(page, size);
 	} else {
@@ -888,7 +885,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 static void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
 	size_t size, enum dma_data_direction dir)
 {
-	unsigned long paddr;
+	phys_addr_t paddr;
 
 	dma_cache_maint_page(page, off, size, dir, dmac_map_area);
 
@@ -904,14 +901,15 @@ static void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
 static void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
 	size_t size, enum dma_data_direction dir)
 {
-	unsigned long paddr = page_to_phys(page) + off;
+	phys_addr_t paddr = page_to_phys(page) + off;
 
 	/* FIXME: non-speculating: not required */
-	/* don't bother invalidating if DMA to device */
-	if (dir != DMA_TO_DEVICE)
+	/* in any case, don't bother invalidating if DMA to device */
+	if (dir != DMA_TO_DEVICE) {
 		outer_inv_range(paddr, paddr + size);
 
-	dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
+		dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
+	}
 
 	/*
 	 * Mark the D-cache clean for these pages to avoid extra flushing.
@@ -1069,48 +1067,98 @@ fs_initcall(dma_debug_do_init);
 
 /* IOMMU */
 
+static int extend_iommu_mapping(struct dma_iommu_mapping *mapping);
+
 static inline dma_addr_t __alloc_iova(struct dma_iommu_mapping *mapping,
 				      size_t size)
 {
 	unsigned int order = get_order(size);
 	unsigned int align = 0;
 	unsigned int count, start;
+	size_t mapping_size = mapping->bits << PAGE_SHIFT;
 	unsigned long flags;
+	dma_addr_t iova;
+	int i;
 
 	if (order > CONFIG_ARM_DMA_IOMMU_ALIGNMENT)
 		order = CONFIG_ARM_DMA_IOMMU_ALIGNMENT;
 
-	count = ((PAGE_ALIGN(size) >> PAGE_SHIFT) +
-		 (1 << mapping->order) - 1) >> mapping->order;
-
-	if (order > mapping->order)
-		align = (1 << (order - mapping->order)) - 1;
+	count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+	align = (1 << order) - 1;
 
 	spin_lock_irqsave(&mapping->lock, flags);
-	start = bitmap_find_next_zero_area(mapping->bitmap, mapping->bits, 0,
-					   count, align);
-	if (start > mapping->bits) {
-		spin_unlock_irqrestore(&mapping->lock, flags);
-		return DMA_ERROR_CODE;
+	for (i = 0; i < mapping->nr_bitmaps; i++) {
+		start = bitmap_find_next_zero_area(mapping->bitmaps[i],
+				mapping->bits, 0, count, align);
+
+		if (start > mapping->bits)
+			continue;
+
+		bitmap_set(mapping->bitmaps[i], start, count);
+		break;
 	}
 
-	bitmap_set(mapping->bitmap, start, count);
+	/*
+	 * No unused range found. Try to extend the existing mapping
+	 * and perform a second attempt to reserve an IO virtual
+	 * address range of size bytes.
+	 */
+	if (i == mapping->nr_bitmaps) {
+		if (extend_iommu_mapping(mapping)) {
+			spin_unlock_irqrestore(&mapping->lock, flags);
+			return DMA_ERROR_CODE;
+		}
+
+		start = bitmap_find_next_zero_area(mapping->bitmaps[i],
+				mapping->bits, 0, count, align);
+
+		if (start > mapping->bits) {
+			spin_unlock_irqrestore(&mapping->lock, flags);
+			return DMA_ERROR_CODE;
+		}
+
+		bitmap_set(mapping->bitmaps[i], start, count);
+	}
 	spin_unlock_irqrestore(&mapping->lock, flags);
 
-	return mapping->base + (start << (mapping->order + PAGE_SHIFT));
+	iova = mapping->base + (mapping_size * i);
+	iova += start << PAGE_SHIFT;
+
+	return iova;
 }
 
 static inline void __free_iova(struct dma_iommu_mapping *mapping,
 			       dma_addr_t addr, size_t size)
 {
-	unsigned int start = (addr - mapping->base) >>
-			     (mapping->order + PAGE_SHIFT);
-	unsigned int count = ((size >> PAGE_SHIFT) +
-			      (1 << mapping->order) - 1) >> mapping->order;
+	unsigned int start, count;
+	size_t mapping_size = mapping->bits << PAGE_SHIFT;
 	unsigned long flags;
+	dma_addr_t bitmap_base;
+	u32 bitmap_index;
+
+	if (!size)
+		return;
+
+	bitmap_index = (u32) (addr - mapping->base) / (u32) mapping_size;
+	BUG_ON(addr < mapping->base || bitmap_index > mapping->extensions);
+
+	bitmap_base = mapping->base + mapping_size * bitmap_index;
+
+	start = (addr - bitmap_base) >>	PAGE_SHIFT;
+
+	if (addr + size > bitmap_base + mapping_size) {
+		/*
+		 * The address range to be freed reaches into the iova
+		 * range of the next bitmap. This should not happen as
+		 * we don't allow this in __alloc_iova (at the
+		 * moment).
+		 */
+		BUG();
+	} else
+		count = size >> PAGE_SHIFT;
 
 	spin_lock_irqsave(&mapping->lock, flags);
-	bitmap_clear(mapping->bitmap, start, count);
+	bitmap_clear(mapping->bitmaps[bitmap_index], start, count);
 	spin_unlock_irqrestore(&mapping->lock, flags);
 }
 
@@ -1875,8 +1923,7 @@ struct dma_map_ops iommu_coherent_ops = {
  * arm_iommu_create_mapping
  * @bus: pointer to the bus holding the client device (for IOMMU calls)
  * @base: start address of the valid IO address space
- * @size: size of the valid IO address space
- * @order: accuracy of the IO addresses allocations
+ * @size: maximum size of the valid IO address space
  *
  * Creates a mapping structure which holds information about used/unused
  * IO address ranges, which is required to perform memory allocation and
@@ -1886,38 +1933,53 @@ struct dma_map_ops iommu_coherent_ops = {
  * arm_iommu_attach_device function.
  */
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size,
-			 int order)
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size)
 {
-	unsigned int count = size >> (PAGE_SHIFT + order);
-	unsigned int bitmap_size = BITS_TO_LONGS(count) * sizeof(long);
+	unsigned int bits = size >> PAGE_SHIFT;
+	unsigned int bitmap_size = BITS_TO_LONGS(bits) * sizeof(long);
 	struct dma_iommu_mapping *mapping;
+	int extensions = 1;
 	int err = -ENOMEM;
 
-	if (!count)
+	if (!bitmap_size)
 		return ERR_PTR(-EINVAL);
 
+	if (bitmap_size > PAGE_SIZE) {
+		extensions = bitmap_size / PAGE_SIZE;
+		bitmap_size = PAGE_SIZE;
+	}
+
 	mapping = kzalloc(sizeof(struct dma_iommu_mapping), GFP_KERNEL);
 	if (!mapping)
 		goto err;
 
-	mapping->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!mapping->bitmap)
+	mapping->bitmap_size = bitmap_size;
+	mapping->bitmaps = kzalloc(extensions * sizeof(unsigned long *),
+				GFP_KERNEL);
+	if (!mapping->bitmaps)
 		goto err2;
 
+	mapping->bitmaps[0] = kzalloc(bitmap_size, GFP_KERNEL);
+	if (!mapping->bitmaps[0])
+		goto err3;
+
+	mapping->nr_bitmaps = 1;
+	mapping->extensions = extensions;
 	mapping->base = base;
 	mapping->bits = BITS_PER_BYTE * bitmap_size;
-	mapping->order = order;
+
 	spin_lock_init(&mapping->lock);
 
 	mapping->domain = iommu_domain_alloc(bus);
 	if (!mapping->domain)
-		goto err3;
+		goto err4;
 
 	kref_init(&mapping->kref);
 	return mapping;
+err4:
+	kfree(mapping->bitmaps[0]);
 err3:
-	kfree(mapping->bitmap);
+	kfree(mapping->bitmaps);
 err2:
 	kfree(mapping);
 err:
@@ -1927,14 +1989,35 @@ EXPORT_SYMBOL_GPL(arm_iommu_create_mapping);
 
 static void release_iommu_mapping(struct kref *kref)
 {
+	int i;
 	struct dma_iommu_mapping *mapping =
 		container_of(kref, struct dma_iommu_mapping, kref);
 
 	iommu_domain_free(mapping->domain);
-	kfree(mapping->bitmap);
+	for (i = 0; i < mapping->nr_bitmaps; i++)
+		kfree(mapping->bitmaps[i]);
+	kfree(mapping->bitmaps);
 	kfree(mapping);
 }
 
+static int extend_iommu_mapping(struct dma_iommu_mapping *mapping)
+{
+	int next_bitmap;
+
+	if (mapping->nr_bitmaps > mapping->extensions)
+		return -EINVAL;
+
+	next_bitmap = mapping->nr_bitmaps;
+	mapping->bitmaps[next_bitmap] = kzalloc(mapping->bitmap_size,
+						GFP_ATOMIC);
+	if (!mapping->bitmaps[next_bitmap])
+		return -ENOMEM;
+
+	mapping->nr_bitmaps++;
+
+	return 0;
+}
+
 void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping)
 {
 	if (mapping)
diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c
index ef69152f9b52..c508f41a43bc 100644
--- a/arch/arm/mm/dump.c
+++ b/arch/arm/mm/dump.c
@@ -120,34 +120,51 @@ static const struct prot_bits pte_bits[] = {
 };
 
 static const struct prot_bits section_bits[] = {
-#ifndef CONFIG_ARM_LPAE
-	/* These are approximate */
+#ifdef CONFIG_ARM_LPAE
+	{
+		.mask	= PMD_SECT_USER,
+		.val	= PMD_SECT_USER,
+		.set	= "USR",
+	}, {
+		.mask	= PMD_SECT_RDONLY,
+		.val	= PMD_SECT_RDONLY,
+		.set	= "ro",
+		.clear	= "RW",
+#elif __LINUX_ARM_ARCH__ >= 6
 	{
-		.mask	= PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
-		.val	= 0,
+		.mask	= PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.val	= PMD_SECT_APX | PMD_SECT_AP_WRITE,
 		.set	= "    ro",
 	}, {
-		.mask	= PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.mask	= PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
 		.val	= PMD_SECT_AP_WRITE,
 		.set	= "    RW",
 	}, {
-		.mask	= PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.mask	= PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
 		.val	= PMD_SECT_AP_READ,
 		.set	= "USR ro",
 	}, {
-		.mask	= PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.mask	= PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
 		.val	= PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
 		.set	= "USR RW",
-#else
+#else /* ARMv4/ARMv5  */
+	/* These are approximate */
 	{
-		.mask	= PMD_SECT_USER,
-		.val	= PMD_SECT_USER,
-		.set	= "USR",
+		.mask   = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.val    = 0,
+		.set    = "    ro",
 	}, {
-		.mask	= PMD_SECT_RDONLY,
-		.val	= PMD_SECT_RDONLY,
-		.set	= "ro",
-		.clear	= "RW",
+		.mask   = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.val    = PMD_SECT_AP_WRITE,
+		.set    = "    RW",
+	}, {
+		.mask   = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.val    = PMD_SECT_AP_READ,
+		.set    = "USR ro",
+	}, {
+		.mask   = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.val    = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+		.set    = "USR RW",
 #endif
 	}, {
 		.mask	= PMD_SECT_XN,
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 3387e60e4ea3..43d54f5b26b9 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -104,17 +104,20 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig
 #define flush_icache_alias(pfn,vaddr,len)	do { } while (0)
 #endif
 
+#define FLAG_PA_IS_EXEC 1
+#define FLAG_PA_CORE_IN_MM 2
+
 static void flush_ptrace_access_other(void *args)
 {
 	__flush_icache_all();
 }
 
-static
-void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
-			 unsigned long uaddr, void *kaddr, unsigned long len)
+static inline
+void __flush_ptrace_access(struct page *page, unsigned long uaddr, void *kaddr,
+			   unsigned long len, unsigned int flags)
 {
 	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+		if (flags & FLAG_PA_CORE_IN_MM) {
 			unsigned long addr = (unsigned long)kaddr;
 			__cpuc_coherent_kern_range(addr, addr + len);
 		}
@@ -128,7 +131,7 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 	}
 
 	/* VIPT non-aliasing D-cache */
-	if (vma->vm_flags & VM_EXEC) {
+	if (flags & FLAG_PA_IS_EXEC) {
 		unsigned long addr = (unsigned long)kaddr;
 		if (icache_is_vipt_aliasing())
 			flush_icache_alias(page_to_pfn(page), uaddr, len);
@@ -140,6 +143,26 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 	}
 }
 
+static
+void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+			 unsigned long uaddr, void *kaddr, unsigned long len)
+{
+	unsigned int flags = 0;
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
+		flags |= FLAG_PA_CORE_IN_MM;
+	if (vma->vm_flags & VM_EXEC)
+		flags |= FLAG_PA_IS_EXEC;
+	__flush_ptrace_access(page, uaddr, kaddr, len, flags);
+}
+
+void flush_uprobe_xol_access(struct page *page, unsigned long uaddr,
+			     void *kaddr, unsigned long len)
+{
+	unsigned int flags = FLAG_PA_CORE_IN_MM|FLAG_PA_IS_EXEC;
+
+	__flush_ptrace_access(page, uaddr, kaddr, len, flags);
+}
+
 /*
  * Copy user data from/to a page which is mapped into a different
  * processes address space.  Really, we want to allow our "user
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 21b9e1bf9b77..45aeaaca9052 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -18,6 +18,21 @@
 #include <asm/tlbflush.h>
 #include "mm.h"
 
+pte_t *fixmap_page_table;
+
+static inline void set_fixmap_pte(int idx, pte_t pte)
+{
+	unsigned long vaddr = __fix_to_virt(idx);
+	set_pte_ext(fixmap_page_table + idx, pte, 0);
+	local_flush_tlb_kernel_page(vaddr);
+}
+
+static inline pte_t get_fixmap_pte(unsigned long vaddr)
+{
+	unsigned long idx = __virt_to_fix(vaddr);
+	return *(fixmap_page_table + idx);
+}
+
 void *kmap(struct page *page)
 {
 	might_sleep();
@@ -63,20 +78,20 @@ void *kmap_atomic(struct page *page)
 	type = kmap_atomic_idx_push();
 
 	idx = type + KM_TYPE_NR * smp_processor_id();
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+	vaddr = __fix_to_virt(idx);
 #ifdef CONFIG_DEBUG_HIGHMEM
 	/*
 	 * With debugging enabled, kunmap_atomic forces that entry to 0.
 	 * Make sure it was indeed properly unmapped.
 	 */
-	BUG_ON(!pte_none(get_top_pte(vaddr)));
+	BUG_ON(!pte_none(*(fixmap_page_table + idx)));
 #endif
 	/*
 	 * When debugging is off, kunmap_atomic leaves the previous mapping
 	 * in place, so the contained TLB flush ensures the TLB is updated
 	 * with the new mapping.
 	 */
-	set_top_pte(vaddr, mk_pte(page, kmap_prot));
+	set_fixmap_pte(idx, mk_pte(page, kmap_prot));
 
 	return (void *)vaddr;
 }
@@ -94,8 +109,8 @@ void __kunmap_atomic(void *kvaddr)
 		if (cache_is_vivt())
 			__cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE);
 #ifdef CONFIG_DEBUG_HIGHMEM
-		BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-		set_top_pte(vaddr, __pte(0));
+		BUG_ON(vaddr != __fix_to_virt(idx));
+		set_fixmap_pte(idx, __pte(0));
 #else
 		(void) idx;  /* to kill a warning */
 #endif
@@ -117,11 +132,11 @@ void *kmap_atomic_pfn(unsigned long pfn)
 
 	type = kmap_atomic_idx_push();
 	idx = type + KM_TYPE_NR * smp_processor_id();
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+	vaddr = __fix_to_virt(idx);
 #ifdef CONFIG_DEBUG_HIGHMEM
-	BUG_ON(!pte_none(get_top_pte(vaddr)));
+	BUG_ON(!pte_none(*(fixmap_page_table + idx)));
 #endif
-	set_top_pte(vaddr, pfn_pte(pfn, kmap_prot));
+	set_fixmap_pte(idx, pfn_pte(pfn, kmap_prot));
 
 	return (void *)vaddr;
 }
@@ -133,5 +148,5 @@ struct page *kmap_atomic_to_page(const void *ptr)
 	if (vaddr < FIXADDR_START)
 		return virt_to_page(ptr);
 
-	return pte_page(get_top_pte(vaddr));
+	return pte_page(get_fixmap_pte(vaddr));
 }
diff --git a/arch/arm/mm/hugetlbpage.c b/arch/arm/mm/hugetlbpage.c
index 54ee6163c181..66781bf34077 100644
--- a/arch/arm/mm/hugetlbpage.c
+++ b/arch/arm/mm/hugetlbpage.c
@@ -56,8 +56,3 @@ int pmd_huge(pmd_t pmd)
 {
 	return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT);
 }
-
-int pmd_huge_support(void)
-{
-	return 1;
-}
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 804d61566a53..659c75d808dc 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -23,6 +23,7 @@
 #include <linux/dma-contiguous.h>
 #include <linux/sizes.h>
 
+#include <asm/cp15.h>
 #include <asm/mach-types.h>
 #include <asm/memblock.h>
 #include <asm/prom.h>
@@ -36,6 +37,14 @@
 
 #include "mm.h"
 
+#ifdef CONFIG_CPU_CP15_MMU
+unsigned long __init __clear_cr(unsigned long mask)
+{
+	cr_alignment = cr_alignment & ~mask;
+	return cr_alignment;
+}
+#endif
+
 static phys_addr_t phys_initrd_start __initdata = 0;
 static unsigned long phys_initrd_size __initdata = 0;
 
@@ -81,24 +90,21 @@ __tagtable(ATAG_INITRD2, parse_tag_initrd2);
  * initialization functions, as well as show_mem() for the skipping
  * of holes in the memory map.  It is populated by arm_add_memory().
  */
-struct meminfo meminfo;
-
 void show_mem(unsigned int filter)
 {
 	int free = 0, total = 0, reserved = 0;
-	int shared = 0, cached = 0, slab = 0, i;
-	struct meminfo * mi = &meminfo;
+	int shared = 0, cached = 0, slab = 0;
+	struct memblock_region *reg;
 
 	printk("Mem-info:\n");
 	show_free_areas(filter);
 
-	for_each_bank (i, mi) {
-		struct membank *bank = &mi->bank[i];
+	for_each_memblock (memory, reg) {
 		unsigned int pfn1, pfn2;
 		struct page *page, *end;
 
-		pfn1 = bank_pfn_start(bank);
-		pfn2 = bank_pfn_end(bank);
+		pfn1 = memblock_region_memory_base_pfn(reg);
+		pfn2 = memblock_region_memory_end_pfn(reg);
 
 		page = pfn_to_page(pfn1);
 		end  = pfn_to_page(pfn2 - 1) + 1;
@@ -115,8 +121,9 @@ void show_mem(unsigned int filter)
 				free++;
 			else
 				shared += page_count(page) - 1;
-			page++;
-		} while (page < end);
+			pfn1++;
+			page = pfn_to_page(pfn1);
+		} while (pfn1 < pfn2);
 	}
 
 	printk("%d pages of RAM\n", total);
@@ -130,16 +137,9 @@ void show_mem(unsigned int filter)
 static void __init find_limits(unsigned long *min, unsigned long *max_low,
 			       unsigned long *max_high)
 {
-	struct meminfo *mi = &meminfo;
-	int i;
-
-	/* This assumes the meminfo array is properly sorted */
-	*min = bank_pfn_start(&mi->bank[0]);
-	for_each_bank (i, mi)
-		if (mi->bank[i].highmem)
-				break;
-	*max_low = bank_pfn_end(&mi->bank[i - 1]);
-	*max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]);
+	*max_low = PFN_DOWN(memblock_get_current_limit());
+	*min = PFN_UP(memblock_start_of_DRAM());
+	*max_high = PFN_DOWN(memblock_end_of_DRAM());
 }
 
 #ifdef CONFIG_ZONE_DMA
@@ -274,14 +274,8 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align)
 	return phys;
 }
 
-void __init arm_memblock_init(struct meminfo *mi,
-	const struct machine_desc *mdesc)
+void __init arm_memblock_init(const struct machine_desc *mdesc)
 {
-	int i;
-
-	for (i = 0; i < mi->nr_banks; i++)
-		memblock_add(mi->bank[i].start, mi->bank[i].size);
-
 	/* Register the kernel text, kernel data and initrd with memblock. */
 #ifdef CONFIG_XIP_KERNEL
 	memblock_reserve(__pa(_sdata), _end - _sdata);
@@ -317,12 +311,13 @@ void __init arm_memblock_init(struct meminfo *mi,
 #endif
 
 	arm_mm_memblock_reserve();
-	arm_dt_memblock_reserve();
 
 	/* reserve any platform specific memblock areas */
 	if (mdesc->reserve)
 		mdesc->reserve();
 
+	early_init_fdt_scan_reserved_mem();
+
 	/*
 	 * reserve memory for DMA contigouos allocations,
 	 * must come from DMA area inside low memory
@@ -411,54 +406,53 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn)
 /*
  * The mem_map array can get very big.  Free the unused area of the memory map.
  */
-static void __init free_unused_memmap(struct meminfo *mi)
+static void __init free_unused_memmap(void)
 {
-	unsigned long bank_start, prev_bank_end = 0;
-	unsigned int i;
+	unsigned long start, prev_end = 0;
+	struct memblock_region *reg;
 
 	/*
 	 * This relies on each bank being in address order.
 	 * The banks are sorted previously in bootmem_init().
 	 */
-	for_each_bank(i, mi) {
-		struct membank *bank = &mi->bank[i];
-
-		bank_start = bank_pfn_start(bank);
+	for_each_memblock(memory, reg) {
+		start = memblock_region_memory_base_pfn(reg);
 
 #ifdef CONFIG_SPARSEMEM
 		/*
 		 * Take care not to free memmap entries that don't exist
 		 * due to SPARSEMEM sections which aren't present.
 		 */
-		bank_start = min(bank_start,
-				 ALIGN(prev_bank_end, PAGES_PER_SECTION));
+		start = min(start,
+				 ALIGN(prev_end, PAGES_PER_SECTION));
 #else
 		/*
 		 * Align down here since the VM subsystem insists that the
 		 * memmap entries are valid from the bank start aligned to
 		 * MAX_ORDER_NR_PAGES.
 		 */
-		bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES);
+		start = round_down(start, MAX_ORDER_NR_PAGES);
 #endif
 		/*
 		 * If we had a previous bank, and there is a space
 		 * between the current bank and the previous, free it.
 		 */
-		if (prev_bank_end && prev_bank_end < bank_start)
-			free_memmap(prev_bank_end, bank_start);
+		if (prev_end && prev_end < start)
+			free_memmap(prev_end, start);
 
 		/*
 		 * Align up here since the VM subsystem insists that the
 		 * memmap entries are valid from the bank end aligned to
 		 * MAX_ORDER_NR_PAGES.
 		 */
-		prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
+		prev_end = ALIGN(memblock_region_memory_end_pfn(reg),
+				 MAX_ORDER_NR_PAGES);
 	}
 
 #ifdef CONFIG_SPARSEMEM
-	if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION))
-		free_memmap(prev_bank_end,
-			    ALIGN(prev_bank_end, PAGES_PER_SECTION));
+	if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION))
+		free_memmap(prev_end,
+			    ALIGN(prev_end, PAGES_PER_SECTION));
 #endif
 }
 
@@ -534,7 +528,7 @@ void __init mem_init(void)
 	set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
 
 	/* this will put all unused low memory onto the freelists */
-	free_unused_memmap(&meminfo);
+	free_unused_memmap();
 	free_all_bootmem();
 
 #ifdef CONFIG_SA1111
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index f9c32ba73544..d1e5ad7ab3bc 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -438,6 +438,13 @@ void __arm_iounmap(volatile void __iomem *io_addr)
 EXPORT_SYMBOL(__arm_iounmap);
 
 #ifdef CONFIG_PCI
+static int pci_ioremap_mem_type = MT_DEVICE;
+
+void pci_ioremap_set_mem_type(int mem_type)
+{
+	pci_ioremap_mem_type = mem_type;
+}
+
 int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
 {
 	BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT);
@@ -445,7 +452,7 @@ int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
 	return ioremap_page_range(PCI_IO_VIRT_BASE + offset,
 				  PCI_IO_VIRT_BASE + offset + SZ_64K,
 				  phys_addr,
-				  __pgprot(get_mem_type(MT_DEVICE)->prot_pte));
+				  __pgprot(get_mem_type(pci_ioremap_mem_type)->prot_pte));
 }
 EXPORT_SYMBOL_GPL(pci_ioremap_io);
 #endif
diff --git a/arch/arm/mm/l2c-common.c b/arch/arm/mm/l2c-common.c
new file mode 100644
index 000000000000..10a3cf28c362
--- /dev/null
+++ b/arch/arm/mm/l2c-common.c
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2010 ARM Ltd.
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/bug.h>
+#include <linux/smp.h>
+#include <asm/outercache.h>
+
+void outer_disable(void)
+{
+	WARN_ON(!irqs_disabled());
+	WARN_ON(num_online_cpus() > 1);
+
+	if (outer_cache.disable)
+		outer_cache.disable();
+}
diff --git a/arch/arm/mm/l2c-l2x0-resume.S b/arch/arm/mm/l2c-l2x0-resume.S
new file mode 100644
index 000000000000..99b05f21a59a
--- /dev/null
+++ b/arch/arm/mm/l2c-l2x0-resume.S
@@ -0,0 +1,58 @@
+/*
+ * L2C-310 early resume code.  This can be used by platforms to restore
+ * the settings of their L2 cache controller before restoring the
+ * processor state.
+ *
+ * This code can only be used to if you are running in the secure world.
+ */
+#include <linux/linkage.h>
+#include <asm/hardware/cache-l2x0.h>
+
+	.text
+
+ENTRY(l2c310_early_resume)
+	adr	r0, 1f
+	ldr	r2, [r0]
+	add	r0, r2, r0
+
+	ldmia	r0, {r1, r2, r3, r4, r5, r6, r7, r8}
+	@ r1 = phys address of L2C-310 controller
+	@ r2 = aux_ctrl
+	@ r3 = tag_latency
+	@ r4 = data_latency
+	@ r5 = filter_start
+	@ r6 = filter_end
+	@ r7 = prefetch_ctrl
+	@ r8 = pwr_ctrl
+
+	@ Check that the address has been initialised
+	teq	r1, #0
+	moveq	pc, lr
+
+	@ The prefetch and power control registers are revision dependent
+	@ and can be written whether or not the L2 cache is enabled
+	ldr	r0, [r1, #L2X0_CACHE_ID]
+	and	r0, r0, #L2X0_CACHE_ID_RTL_MASK
+	cmp	r0, #L310_CACHE_ID_RTL_R2P0
+	strcs	r7, [r1, #L310_PREFETCH_CTRL]
+	cmp	r0, #L310_CACHE_ID_RTL_R3P0
+	strcs	r8, [r1, #L310_POWER_CTRL]
+
+	@ Don't setup the L2 cache if it is already enabled
+	ldr	r0, [r1, #L2X0_CTRL]
+	tst	r0, #L2X0_CTRL_EN
+	movne	pc, lr
+
+	str	r3, [r1, #L310_TAG_LATENCY_CTRL]
+	str	r4, [r1, #L310_DATA_LATENCY_CTRL]
+	str	r6, [r1, #L310_ADDR_FILTER_END]
+	str	r5, [r1, #L310_ADDR_FILTER_START]
+
+	str	r2, [r1, #L2X0_AUX_CTRL]
+	mov	r9, #L2X0_CTRL_EN
+	str	r9, [r1, #L2X0_CTRL]
+	mov	pc, lr
+ENDPROC(l2c310_early_resume)
+
+	.align
+1:	.long	l2x0_saved_regs - .
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 7ea641b7aa7d..ce727d47275c 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -2,6 +2,8 @@
 #include <linux/list.h>
 #include <linux/vmalloc.h>
 
+#include <asm/pgtable.h>
+
 /* the upper-most page table pointer */
 extern pmd_t *top_pmd;
 
@@ -93,3 +95,5 @@ extern phys_addr_t arm_lowmem_limit;
 void __init bootmem_init(void);
 void arm_mm_memblock_reserve(void);
 void dma_contiguous_remap(void);
+
+unsigned long __clear_cr(unsigned long mask);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index a623cb3ad012..ab14b79b03f0 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -35,6 +35,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/pci.h>
+#include <asm/fixmap.h>
 
 #include "mm.h"
 #include "tcm.h"
@@ -117,28 +118,54 @@ static struct cachepolicy cache_policies[] __initdata = {
 };
 
 #ifdef CONFIG_CPU_CP15
+static unsigned long initial_pmd_value __initdata = 0;
+
 /*
- * These are useful for identifying cache coherency
- * problems by allowing the cache or the cache and
- * writebuffer to be turned off.  (Note: the write
- * buffer should not be on and the cache off).
+ * Initialise the cache_policy variable with the initial state specified
+ * via the "pmd" value.  This is used to ensure that on ARMv6 and later,
+ * the C code sets the page tables up with the same policy as the head
+ * assembly code, which avoids an illegal state where the TLBs can get
+ * confused.  See comments in early_cachepolicy() for more information.
  */
-static int __init early_cachepolicy(char *p)
+void __init init_default_cache_policy(unsigned long pmd)
 {
 	int i;
 
+	initial_pmd_value = pmd;
+
+	pmd &= PMD_SECT_TEX(1) | PMD_SECT_BUFFERABLE | PMD_SECT_CACHEABLE;
+
+	for (i = 0; i < ARRAY_SIZE(cache_policies); i++)
+		if (cache_policies[i].pmd == pmd) {
+			cachepolicy = i;
+			break;
+		}
+
+	if (i == ARRAY_SIZE(cache_policies))
+		pr_err("ERROR: could not find cache policy\n");
+}
+
+/*
+ * These are useful for identifying cache coherency problems by allowing
+ * the cache or the cache and writebuffer to be turned off.  (Note: the
+ * write buffer should not be on and the cache off).
+ */
+static int __init early_cachepolicy(char *p)
+{
+	int i, selected = -1;
+
 	for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
 		int len = strlen(cache_policies[i].policy);
 
 		if (memcmp(p, cache_policies[i].policy, len) == 0) {
-			cachepolicy = i;
-			cr_alignment &= ~cache_policies[i].cr_mask;
-			cr_no_alignment &= ~cache_policies[i].cr_mask;
+			selected = i;
 			break;
 		}
 	}
-	if (i == ARRAY_SIZE(cache_policies))
-		printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
+
+	if (selected == -1)
+		pr_err("ERROR: unknown or unsupported cache policy\n");
+
 	/*
 	 * This restriction is partly to do with the way we boot; it is
 	 * unpredictable to have memory mapped using two different sets of
@@ -146,12 +173,18 @@ static int __init early_cachepolicy(char *p)
 	 * change these attributes once the initial assembly has setup the
 	 * page tables.
 	 */
-	if (cpu_architecture() >= CPU_ARCH_ARMv6) {
-		printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n");
-		cachepolicy = CPOLICY_WRITEBACK;
+	if (cpu_architecture() >= CPU_ARCH_ARMv6 && selected != cachepolicy) {
+		pr_warn("Only cachepolicy=%s supported on ARMv6 and later\n",
+			cache_policies[cachepolicy].policy);
+		return 0;
+	}
+
+	if (selected != cachepolicy) {
+		unsigned long cr = __clear_cr(cache_policies[selected].cr_mask);
+		cachepolicy = selected;
+		flush_cache_all();
+		set_cr(cr);
 	}
-	flush_cache_all();
-	set_cr(cr_alignment);
 	return 0;
 }
 early_param("cachepolicy", early_cachepolicy);
@@ -186,35 +219,6 @@ static int __init early_ecc(char *p)
 early_param("ecc", early_ecc);
 #endif
 
-static int __init noalign_setup(char *__unused)
-{
-	cr_alignment &= ~CR_A;
-	cr_no_alignment &= ~CR_A;
-	set_cr(cr_alignment);
-	return 1;
-}
-__setup("noalign", noalign_setup);
-
-#ifndef CONFIG_SMP
-void adjust_cr(unsigned long mask, unsigned long set)
-{
-	unsigned long flags;
-
-	mask &= ~CR_A;
-
-	set &= mask;
-
-	local_irq_save(flags);
-
-	cr_no_alignment = (cr_no_alignment & ~mask) | set;
-	cr_alignment = (cr_alignment & ~mask) | set;
-
-	set_cr((get_cr() & ~mask) | set);
-
-	local_irq_restore(flags);
-}
-#endif
-
 #else /* ifdef CONFIG_CPU_CP15 */
 
 static int __init early_cachepolicy(char *p)
@@ -414,8 +418,17 @@ static void __init build_mem_type_table(void)
 			cachepolicy = CPOLICY_WRITEBACK;
 		ecc_mask = 0;
 	}
-	if (is_smp())
-		cachepolicy = CPOLICY_WRITEALLOC;
+
+	if (is_smp()) {
+		if (cachepolicy != CPOLICY_WRITEALLOC) {
+			pr_warn("Forcing write-allocate cache policy for SMP\n");
+			cachepolicy = CPOLICY_WRITEALLOC;
+		}
+		if (!(initial_pmd_value & PMD_SECT_S)) {
+			pr_warn("Forcing shared mappings for SMP\n");
+			initial_pmd_value |= PMD_SECT_S;
+		}
+	}
 
 	/*
 	 * Strip out features not present on earlier architectures.
@@ -516,6 +529,16 @@ static void __init build_mem_type_table(void)
 	s2_device_pgprot = mem_types[MT_DEVICE].prot_pte_s2;
 
 	/*
+	 * We don't use domains on ARMv6 (since this causes problems with
+	 * v6/v7 kernels), so we must use a separate memory type for user
+	 * r/o, kernel r/w to map the vectors page.
+	 */
+#ifndef CONFIG_ARM_LPAE
+	if (cpu_arch == CPU_ARCH_ARMv6)
+		vecs_pgprot |= L_PTE_MT_VECTORS;
+#endif
+
+	/*
 	 * ARMv6 and above have extended page tables.
 	 */
 	if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
@@ -529,11 +552,12 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 #endif
 
-		if (is_smp()) {
-			/*
-			 * Mark memory with the "shared" attribute
-			 * for SMP systems
-			 */
+		/*
+		 * If the initial page tables were created with the S bit
+		 * set, then we need to do the same here for the same
+		 * reasons given in early_cachepolicy().
+		 */
+		if (initial_pmd_value & PMD_SECT_S) {
 			user_pgprot |= L_PTE_SHARED;
 			kern_pgprot |= L_PTE_SHARED;
 			vecs_pgprot |= L_PTE_SHARED;
@@ -1051,74 +1075,47 @@ phys_addr_t arm_lowmem_limit __initdata = 0;
 void __init sanity_check_meminfo(void)
 {
 	phys_addr_t memblock_limit = 0;
-	int i, j, highmem = 0;
+	int highmem = 0;
 	phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
+	struct memblock_region *reg;
 
-	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
-		struct membank *bank = &meminfo.bank[j];
-		phys_addr_t size_limit;
-
-		*bank = meminfo.bank[i];
-		size_limit = bank->size;
+	for_each_memblock(memory, reg) {
+		phys_addr_t block_start = reg->base;
+		phys_addr_t block_end = reg->base + reg->size;
+		phys_addr_t size_limit = reg->size;
 
-		if (bank->start >= vmalloc_limit)
+		if (reg->base >= vmalloc_limit)
 			highmem = 1;
 		else
-			size_limit = vmalloc_limit - bank->start;
+			size_limit = vmalloc_limit - reg->base;
 
-		bank->highmem = highmem;
 
-#ifdef CONFIG_HIGHMEM
-		/*
-		 * Split those memory banks which are partially overlapping
-		 * the vmalloc area greatly simplifying things later.
-		 */
-		if (!highmem && bank->size > size_limit) {
-			if (meminfo.nr_banks >= NR_BANKS) {
-				printk(KERN_CRIT "NR_BANKS too low, "
-						 "ignoring high memory\n");
-			} else {
-				memmove(bank + 1, bank,
-					(meminfo.nr_banks - i) * sizeof(*bank));
-				meminfo.nr_banks++;
-				i++;
-				bank[1].size -= size_limit;
-				bank[1].start = vmalloc_limit;
-				bank[1].highmem = highmem = 1;
-				j++;
+		if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) {
+
+			if (highmem) {
+				pr_notice("Ignoring RAM at %pa-%pa (!CONFIG_HIGHMEM)\n",
+					&block_start, &block_end);
+				memblock_remove(reg->base, reg->size);
+				continue;
 			}
-			bank->size = size_limit;
-		}
-#else
-		/*
-		 * Highmem banks not allowed with !CONFIG_HIGHMEM.
-		 */
-		if (highmem) {
-			printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
-			       "(!CONFIG_HIGHMEM).\n",
-			       (unsigned long long)bank->start,
-			       (unsigned long long)bank->start + bank->size - 1);
-			continue;
-		}
 
-		/*
-		 * Check whether this memory bank would partially overlap
-		 * the vmalloc area.
-		 */
-		if (bank->size > size_limit) {
-			printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
-			       "to -%.8llx (vmalloc region overlap).\n",
-			       (unsigned long long)bank->start,
-			       (unsigned long long)bank->start + bank->size - 1,
-			       (unsigned long long)bank->start + size_limit - 1);
-			bank->size = size_limit;
+			if (reg->size > size_limit) {
+				phys_addr_t overlap_size = reg->size - size_limit;
+
+				pr_notice("Truncating RAM at %pa-%pa to -%pa",
+				      &block_start, &block_end, &vmalloc_limit);
+				memblock_remove(vmalloc_limit, overlap_size);
+				block_end = vmalloc_limit;
+			}
 		}
-#endif
-		if (!bank->highmem) {
-			phys_addr_t bank_end = bank->start + bank->size;
 
-			if (bank_end > arm_lowmem_limit)
-				arm_lowmem_limit = bank_end;
+		if (!highmem) {
+			if (block_end > arm_lowmem_limit) {
+				if (reg->size > size_limit)
+					arm_lowmem_limit = vmalloc_limit;
+				else
+					arm_lowmem_limit = block_end;
+			}
 
 			/*
 			 * Find the first non-section-aligned page, and point
@@ -1134,35 +1131,15 @@ void __init sanity_check_meminfo(void)
 			 * occurs before any free memory is mapped.
 			 */
 			if (!memblock_limit) {
-				if (!IS_ALIGNED(bank->start, SECTION_SIZE))
-					memblock_limit = bank->start;
-				else if (!IS_ALIGNED(bank_end, SECTION_SIZE))
-					memblock_limit = bank_end;
+				if (!IS_ALIGNED(block_start, SECTION_SIZE))
+					memblock_limit = block_start;
+				else if (!IS_ALIGNED(block_end, SECTION_SIZE))
+					memblock_limit = arm_lowmem_limit;
 			}
-		}
-		j++;
-	}
-#ifdef CONFIG_HIGHMEM
-	if (highmem) {
-		const char *reason = NULL;
 
-		if (cache_is_vipt_aliasing()) {
-			/*
-			 * Interactions between kmap and other mappings
-			 * make highmem support with aliasing VIPT caches
-			 * rather difficult.
-			 */
-			reason = "with VIPT aliasing cache";
-		}
-		if (reason) {
-			printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
-				reason);
-			while (j > 0 && meminfo.bank[j - 1].highmem)
-				j--;
 		}
 	}
-#endif
-	meminfo.nr_banks = j;
+
 	high_memory = __va(arm_lowmem_limit - 1) + 1;
 
 	/*
@@ -1349,6 +1326,9 @@ static void __init kmap_init(void)
 #ifdef CONFIG_HIGHMEM
 	pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE),
 		PKMAP_BASE, _PAGE_KERNEL_TABLE);
+
+	fixmap_page_table = early_pte_alloc(pmd_off_k(FIXADDR_START),
+		FIXADDR_START, _PAGE_KERNEL_TABLE);
 #endif
 }
 
@@ -1451,7 +1431,7 @@ void __init early_paging_init(const struct machine_desc *mdesc,
 	 * just complicate the code.
 	 */
 	flush_cache_louis();
-	dsb();
+	dsb(ishst);
 	isb();
 
 	/* remap level 1 table */
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 55764a7ef1f0..da1874f9f8cf 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -88,30 +88,35 @@ static unsigned long irbar_read(void)
 void __init sanity_check_meminfo_mpu(void)
 {
 	int i;
-	struct membank *bank = meminfo.bank;
 	phys_addr_t phys_offset = PHYS_OFFSET;
 	phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size;
-
-	/* Initially only use memory continuous from PHYS_OFFSET */
-	if (bank_phys_start(&bank[0]) != phys_offset)
-		panic("First memory bank must be contiguous from PHYS_OFFSET");
-
-	/* Banks have already been sorted by start address */
-	for (i = 1; i < meminfo.nr_banks; i++) {
-		if (bank[i].start <= bank_phys_end(&bank[0]) &&
-		    bank_phys_end(&bank[i]) > bank_phys_end(&bank[0])) {
-			bank[0].size = bank_phys_end(&bank[i]) - bank[0].start;
+	struct memblock_region *reg;
+	bool first = true;
+	phys_addr_t mem_start;
+	phys_addr_t mem_end;
+
+	for_each_memblock(memory, reg) {
+		if (first) {
+			/*
+			 * Initially only use memory continuous from
+			 * PHYS_OFFSET */
+			if (reg->base != phys_offset)
+				panic("First memory bank must be contiguous from PHYS_OFFSET");
+
+			mem_start = reg->base;
+			mem_end = reg->base + reg->size;
+			specified_mem_size = reg->size;
+			first = false;
 		} else {
-			pr_notice("Ignoring RAM after 0x%.8lx. "
-			"First non-contiguous (ignored) bank start: 0x%.8lx\n",
-				(unsigned long)bank_phys_end(&bank[0]),
-				(unsigned long)bank_phys_start(&bank[i]));
-			break;
+			/*
+			 * memblock auto merges contiguous blocks, remove
+			 * all blocks afterwards
+			 */
+			pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n",
+				  &mem_start, &reg->base);
+			memblock_remove(reg->base, reg->size);
 		}
 	}
-	/* All contiguous banks are now merged in to the first bank */
-	meminfo.nr_banks = 1;
-	specified_mem_size = bank[0].size;
 
 	/*
 	 * MPU has curious alignment requirements: Size must be power of 2, and
@@ -128,23 +133,24 @@ void __init sanity_check_meminfo_mpu(void)
 	 */
 	aligned_region_size = (phys_offset - 1) ^ (phys_offset);
 	/* Find the max power-of-two sized region that fits inside our bank */
-	rounded_mem_size = (1 <<  __fls(bank[0].size)) - 1;
+	rounded_mem_size = (1 <<  __fls(specified_mem_size)) - 1;
 
 	/* The actual region size is the smaller of the two */
 	aligned_region_size = aligned_region_size < rounded_mem_size
 				? aligned_region_size + 1
 				: rounded_mem_size + 1;
 
-	if (aligned_region_size != specified_mem_size)
-		pr_warn("Truncating memory from 0x%.8lx to 0x%.8lx (MPU region constraints)",
-				(unsigned long)specified_mem_size,
-				(unsigned long)aligned_region_size);
+	if (aligned_region_size != specified_mem_size) {
+		pr_warn("Truncating memory from %pa to %pa (MPU region constraints)",
+				&specified_mem_size, &aligned_region_size);
+		memblock_remove(mem_start + aligned_region_size,
+				specified_mem_size - aligned_round_size);
+
+		mem_end = mem_start + aligned_region_size;
+	}
 
-	meminfo.bank[0].size = aligned_region_size;
-	pr_debug("MPU Region from 0x%.8lx size 0x%.8lx (end 0x%.8lx))\n",
-		(unsigned long)phys_offset,
-		(unsigned long)aligned_region_size,
-		(unsigned long)bank_phys_end(&bank[0]));
+	pr_debug("MPU Region from %pa size %pa (end %pa))\n",
+		&phys_offset, &aligned_region_size, &mem_end);
 
 }
 
@@ -292,7 +298,7 @@ void __init sanity_check_meminfo(void)
 {
 	phys_addr_t end;
 	sanity_check_meminfo_mpu();
-	end = bank_phys_end(&meminfo.bank[meminfo.nr_banks - 1]);
+	end = memblock_end_of_DRAM();
 	high_memory = __va(end - 1) + 1;
 }
 
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index e3c48a3fe063..ee1d80593958 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -112,13 +112,9 @@
  *  100x   1   0   1	r/o	no acc
  *  10x0   1   0   1	r/o	no acc
  *  1011   0   0   1	r/w	no acc
- *  110x   0   1   0	r/w	r/o
- *  11x0   0   1   0	r/w	r/o
- *  1111   0   1   1	r/w	r/w
- *
- * If !CONFIG_CPU_USE_DOMAINS, the following permissions are changed:
  *  110x   1   1   1	r/o	r/o
  *  11x0   1   1   1	r/o	r/o
+ *  1111   0   1   1	r/w	r/w
  */
 	.macro	armv6_mt_table pfx
 \pfx\()_mt_table:
@@ -137,7 +133,7 @@
 	.long	PTE_EXT_TEX(2)					@ L_PTE_MT_DEV_NONSHARED
 	.long	0x00						@ unused
 	.long	0x00						@ unused
-	.long	0x00						@ unused
+	.long	PTE_CACHEABLE | PTE_BUFFERABLE | PTE_EXT_APX	@ L_PTE_MT_VECTORS
 	.endm
 
 	.macro	armv6_set_pte_ext pfx
@@ -158,24 +154,21 @@
 
 	tst	r1, #L_PTE_USER
 	orrne	r3, r3, #PTE_EXT_AP1
-#ifdef CONFIG_CPU_USE_DOMAINS
-	@ allow kernel read/write access to read-only user pages
 	tstne	r3, #PTE_EXT_APX
-	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-#endif
+
+	@ user read-only -> kernel read-only
+	bicne	r3, r3, #PTE_EXT_AP0
 
 	tst	r1, #L_PTE_XN
 	orrne	r3, r3, #PTE_EXT_XN
 
-	orr	r3, r3, r2
+	eor	r3, r3, r2
 
 	tst	r1, #L_PTE_YOUNG
 	tstne	r1, #L_PTE_PRESENT
 	moveq	r3, #0
-#ifndef CONFIG_CPU_USE_DOMAINS
 	tstne	r1, #L_PTE_NONE
 	movne	r3, #0
-#endif
 
 	str	r3, [r0]
 	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
index bdd3be4be77a..1f52915f2b28 100644
--- a/arch/arm/mm/proc-v7-2level.S
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -90,21 +90,14 @@ ENTRY(cpu_v7_set_pte_ext)
 
 	tst	r1, #L_PTE_USER
 	orrne	r3, r3, #PTE_EXT_AP1
-#ifdef CONFIG_CPU_USE_DOMAINS
-	@ allow kernel read/write access to read-only user pages
-	tstne	r3, #PTE_EXT_APX
-	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-#endif
 
 	tst	r1, #L_PTE_XN
 	orrne	r3, r3, #PTE_EXT_XN
 
 	tst	r1, #L_PTE_YOUNG
 	tstne	r1, #L_PTE_VALID
-#ifndef CONFIG_CPU_USE_DOMAINS
 	eorne	r1, r1, #L_PTE_NONE
 	tstne	r1, #L_PTE_NONE
-#endif
 	moveq	r3, #0
 
  ARM(	str	r3, [r0, #2048]! )
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
index 01a719e18bb0..22e3ad63500c 100644
--- a/arch/arm/mm/proc-v7-3level.S
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -64,6 +64,14 @@ ENTRY(cpu_v7_switch_mm)
 	mov	pc, lr
 ENDPROC(cpu_v7_switch_mm)
 
+#ifdef __ARMEB__
+#define rl r3
+#define rh r2
+#else
+#define rl r2
+#define rh r3
+#endif
+
 /*
  * cpu_v7_set_pte_ext(ptep, pte)
  *
@@ -73,13 +81,13 @@ ENDPROC(cpu_v7_switch_mm)
  */
 ENTRY(cpu_v7_set_pte_ext)
 #ifdef CONFIG_MMU
-	tst	r2, #L_PTE_VALID
+	tst	rl, #L_PTE_VALID
 	beq	1f
-	tst	r3, #1 << (57 - 32)		@ L_PTE_NONE
-	bicne	r2, #L_PTE_VALID
+	tst	rh, #1 << (57 - 32)		@ L_PTE_NONE
+	bicne	rl, #L_PTE_VALID
 	bne	1f
-	tst	r3, #1 << (55 - 32)		@ L_PTE_DIRTY
-	orreq	r2, #L_PTE_RDONLY
+	tst	rh, #1 << (55 - 32)		@ L_PTE_DIRTY
+	orreq	rl, #L_PTE_RDONLY
 1:	strd	r2, r3, [r0]
 	ALT_SMP(W(nop))
 	ALT_UP (mcr	p15, 0, r0, c7, c10, 1)		@ flush_pte
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 74f6033e76dd..3db2c2f04a30 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -169,9 +169,31 @@ ENDPROC(cpu_pj4b_do_idle)
 	globl_equ	cpu_pj4b_do_idle,  	cpu_v7_do_idle
 #endif
 	globl_equ	cpu_pj4b_dcache_clean_area,	cpu_v7_dcache_clean_area
-	globl_equ	cpu_pj4b_do_suspend,	cpu_v7_do_suspend
-	globl_equ	cpu_pj4b_do_resume,	cpu_v7_do_resume
-	globl_equ	cpu_pj4b_suspend_size,	cpu_v7_suspend_size
+#ifdef CONFIG_ARM_CPU_SUSPEND
+ENTRY(cpu_pj4b_do_suspend)
+	stmfd	sp!, {r6 - r10}
+	mrc	p15, 1, r6, c15, c1, 0  @ save CP15 - extra features
+	mrc	p15, 1, r7, c15, c2, 0	@ save CP15 - Aux Func Modes Ctrl 0
+	mrc	p15, 1, r8, c15, c1, 2	@ save CP15 - Aux Debug Modes Ctrl 2
+	mrc	p15, 1, r9, c15, c1, 1  @ save CP15 - Aux Debug Modes Ctrl 1
+	mrc	p15, 0, r10, c9, c14, 0  @ save CP15 - PMC
+	stmia	r0!, {r6 - r10}
+	ldmfd	sp!, {r6 - r10}
+	b cpu_v7_do_suspend
+ENDPROC(cpu_pj4b_do_suspend)
+
+ENTRY(cpu_pj4b_do_resume)
+	ldmia	r0!, {r6 - r10}
+	mcr	p15, 1, r6, c15, c1, 0  @ save CP15 - extra features
+	mcr	p15, 1, r7, c15, c2, 0	@ save CP15 - Aux Func Modes Ctrl 0
+	mcr	p15, 1, r8, c15, c1, 2	@ save CP15 - Aux Debug Modes Ctrl 2
+	mcr	p15, 1, r9, c15, c1, 1  @ save CP15 - Aux Debug Modes Ctrl 1
+	mcr	p15, 0, r10, c9, c14, 0  @ save CP15 - PMC
+	b cpu_v7_do_resume
+ENDPROC(cpu_pj4b_do_resume)
+#endif
+.globl	cpu_pj4b_suspend_size
+.equ	cpu_pj4b_suspend_size, 4 * 14
 
 #endif
 
@@ -192,7 +214,9 @@ __v7_cr7mp_setup:
 	mov	r10, #(1 << 0)			@ Cache/TLB ops broadcasting
 	b	1f
 __v7_ca7mp_setup:
+__v7_ca12mp_setup:
 __v7_ca15mp_setup:
+__v7_ca17mp_setup:
 	mov	r10, #0
 1:
 #ifdef CONFIG_SMP
@@ -484,6 +508,16 @@ __v7_ca7mp_proc_info:
 	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
 
 	/*
+	 * ARM Ltd. Cortex A12 processor.
+	 */
+	.type	__v7_ca12mp_proc_info, #object
+__v7_ca12mp_proc_info:
+	.long	0x410fc0d0
+	.long	0xff0ffff0
+	__v7_proc __v7_ca12mp_setup
+	.size	__v7_ca12mp_proc_info, . - __v7_ca12mp_proc_info
+
+	/*
 	 * ARM Ltd. Cortex A15 processor.
 	 */
 	.type	__v7_ca15mp_proc_info, #object
@@ -494,6 +528,16 @@ __v7_ca15mp_proc_info:
 	.size	__v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
 
 	/*
+	 * ARM Ltd. Cortex A17 processor.
+	 */
+	.type	__v7_ca17mp_proc_info, #object
+__v7_ca17mp_proc_info:
+	.long	0x410fc0e0
+	.long	0xff0ffff0
+	__v7_proc __v7_ca17mp_setup
+	.size	__v7_ca17mp_proc_info, . - __v7_ca17mp_proc_info
+
+	/*
 	 * Qualcomm Inc. Krait processors.
 	 */
 	.type	__krait_proc_info, #object
diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S
index 0c93588fcb91..1ca37c72f12f 100644
--- a/arch/arm/mm/proc-v7m.S
+++ b/arch/arm/mm/proc-v7m.S
@@ -123,6 +123,11 @@ __v7m_setup:
 	mov	pc, lr
 ENDPROC(__v7m_setup)
 
+	.align 2
+__v7m_setup_stack:
+	.space	4 * 8				@ 8 registers
+__v7m_setup_stack_top:
+
 	define_processor_functions v7m, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1
 
 	.section ".rodata"
@@ -152,6 +157,3 @@ __v7m_proc_info:
 	.long	nop_cache_fns		@ proc_info_list.cache
 	.size	__v7m_proc_info, . - __v7m_proc_info
 
-__v7m_setup_stack:
-	.space	4 * 8				@ 8 registers
-__v7m_setup_stack_top:
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 271b5e971568..6f879c319a9d 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -825,8 +825,8 @@ b_epilogue:
 			break;
 		case BPF_S_ANC_RXHASH:
 			ctx->seen |= SEEN_SKB;
-			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, rxhash) != 4);
-			off = offsetof(struct sk_buff, rxhash);
+			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, hash) != 4);
+			off = offsetof(struct sk_buff, hash);
 			emit(ARM_LDR_I(r_A, r_skb, off), ctx);
 			break;
 		case BPF_S_ANC_VLAN_TAG:
@@ -925,6 +925,7 @@ void bpf_jit_compile(struct sk_filter *fp)
 		bpf_jit_dump(fp->len, alloc_size, 2, ctx.target);
 
 	fp->bpf_func = (void *)ctx.target;
+	fp->jited = 1;
 out:
 	kfree(ctx.offsets);
 	return;
@@ -932,7 +933,7 @@ out:
 
 void bpf_jit_free(struct sk_filter *fp)
 {
-	if (fp->bpf_func != sk_run_filter)
+	if (fp->jited)
 		module_free(NULL, fp->bpf_func);
 	kfree(fp);
 }
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index d70b73364a3f..6ad65d8ae237 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -127,7 +127,7 @@ iop_timer_interrupt(int irq, void *dev_id)
 static struct irqaction iop_timer_irq = {
 	.name		= "IOP Timer Tick",
 	.handler	= iop_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.dev_id		= &iop_clockevent,
 };
 
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 436ea97074cd..02fc10d2d63b 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -86,9 +86,6 @@ config OMAP_MUX_WARNINGS
 	  to change the pin multiplexing setup.	 When there are no warnings
 	  printed, it's safe to deselect OMAP_MUX for your product.
 
-config OMAP_IOMMU_IVA2
-	bool
-
 config OMAP_MPU_TIMER
 	bool "Use mpu timer"
 	depends on ARCH_OMAP1
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 384a776d8eb2..61b4d705c267 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -40,7 +40,7 @@ static void __iomem *sync32k_cnt_reg;
 
 static u64 notrace omap_32k_read_sched_clock(void)
 {
-	return sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0;
+	return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
 }
 
 /**
@@ -64,7 +64,7 @@ static void omap_read_persistent_clock(struct timespec *ts)
 	spin_lock_irqsave(&read_persistent_clock_lock, flags);
 
 	last_cycles = cycles;
-	cycles = sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0;
+	cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
 
 	nsecs = clocksource_cyc2ns(cycles - last_cycles,
 					persistent_mult, persistent_shift);
@@ -95,7 +95,7 @@ int __init omap_init_clocksource_32k(void __iomem *vbase)
 	 * The 'SCHEME' bits(30-31) of the revision register is used
 	 * to identify the version.
 	 */
-	if (__raw_readl(vbase + OMAP2_32KSYNCNT_REV_OFF) &
+	if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) &
 						OMAP2_32KSYNCNT_REV_SCHEME)
 		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH;
 	else
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index aa7ebc6bcd65..48b69de89a5d 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -85,12 +85,12 @@ static void dbg_led_set(struct led_classdev *cdev,
 	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
 	u16 reg;
 
-	reg = __raw_readw(&fpga->leds);
+	reg = readw_relaxed(&fpga->leds);
 	if (b != LED_OFF)
 		reg |= led->mask;
 	else
 		reg &= ~led->mask;
-	__raw_writew(reg, &fpga->leds);
+	writew_relaxed(reg, &fpga->leds);
 }
 
 static enum led_brightness dbg_led_get(struct led_classdev *cdev)
@@ -98,7 +98,7 @@ static enum led_brightness dbg_led_get(struct led_classdev *cdev)
 	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
 	u16 reg;
 
-	reg = __raw_readw(&fpga->leds);
+	reg = readw_relaxed(&fpga->leds);
 	return (reg & led->mask) ? LED_FULL : LED_OFF;
 }
 
@@ -112,7 +112,7 @@ static int fpga_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	fpga = ioremap(iomem->start, resource_size(iomem));
-	__raw_writew(0xff, &fpga->leds);
+	writew_relaxed(0xff, &fpga->leds);
 
 	for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
 		struct dbg_led *led;
@@ -138,15 +138,15 @@ static int fpga_probe(struct platform_device *pdev)
 
 static int fpga_suspend_noirq(struct device *dev)
 {
-	fpga_led_state = __raw_readw(&fpga->leds);
-	__raw_writew(0xff, &fpga->leds);
+	fpga_led_state = readw_relaxed(&fpga->leds);
+	writew_relaxed(0xff, &fpga->leds);
 
 	return 0;
 }
 
 static int fpga_resume_noirq(struct device *dev)
 {
-	__raw_writew(~fpga_led_state, &fpga->leds);
+	writew_relaxed(~fpga_led_state, &fpga->leds);
 	return 0;
 }
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 01619c2910e3..b5608b1f9fbd 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -70,6 +70,7 @@ static u32 errata;
 
 static struct omap_dma_global_context_registers {
 	u32 dma_irqenable_l0;
+	u32 dma_irqenable_l1;
 	u32 dma_ocp_sysconfig;
 	u32 dma_gcr;
 } omap_dma_global_context;
@@ -1973,10 +1974,17 @@ static struct irqaction omap24xx_dma_irq;
 
 /*----------------------------------------------------------------------------*/
 
+/*
+ * Note that we are currently using only IRQENABLE_L0 and L1.
+ * As the DSP may be using IRQENABLE_L2 and L3, let's not
+ * touch those for now.
+ */
 void omap_dma_global_context_save(void)
 {
 	omap_dma_global_context.dma_irqenable_l0 =
 		p->dma_read(IRQENABLE_L0, 0);
+	omap_dma_global_context.dma_irqenable_l1 =
+		p->dma_read(IRQENABLE_L1, 0);
 	omap_dma_global_context.dma_ocp_sysconfig =
 		p->dma_read(OCP_SYSCONFIG, 0);
 	omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
@@ -1991,6 +1999,8 @@ void omap_dma_global_context_restore(void)
 		OCP_SYSCONFIG, 0);
 	p->dma_write(omap_dma_global_context.dma_irqenable_l0,
 		IRQENABLE_L0, 0);
+	p->dma_write(omap_dma_global_context.dma_irqenable_l1,
+		IRQENABLE_L1, 0);
 
 	if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
 		p->dma_write(0x3 , IRQSTATUS_L0, 0);
@@ -2000,6 +2010,12 @@ void omap_dma_global_context_restore(void)
 			omap_clear_dma(ch);
 }
 
+struct omap_system_dma_plat_info *omap_get_plat_info(void)
+{
+	return p;
+}
+EXPORT_SYMBOL_GPL(omap_get_plat_info);
+
 static int omap_system_dma_probe(struct platform_device *pdev)
 {
 	int ch, ret = 0;
@@ -2024,9 +2040,16 @@ static int omap_system_dma_probe(struct platform_device *pdev)
 
 	dma_lch_count		= d->lch_count;
 	dma_chan_count		= dma_lch_count;
-	dma_chan		= d->chan;
 	enable_1510_mode	= d->dev_caps & ENABLE_1510_MODE;
 
+	dma_chan = devm_kcalloc(&pdev->dev, dma_lch_count,
+				sizeof(struct omap_dma_lch), GFP_KERNEL);
+	if (!dma_chan) {
+		dev_err(&pdev->dev, "%s: kzalloc fail\n", __func__);
+		return -ENOMEM;
+	}
+
+
 	if (dma_omap2plus()) {
 		dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
 						dma_lch_count, GFP_KERNEL);
@@ -2111,7 +2134,6 @@ exit_dma_irq_fail:
 	}
 
 exit_dma_lch_fail:
-	kfree(dma_chan);
 	return ret;
 }
 
@@ -2131,7 +2153,6 @@ static int omap_system_dma_remove(struct platform_device *pdev)
 			free_irq(dma_irq, (void *)(irq_rel + 1));
 		}
 	}
-	kfree(dma_chan);
 	return 0;
 }
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 869254cebf84..db10169a08de 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -103,7 +103,7 @@ static void omap_timer_restore_context(struct omap_dm_timer *timer)
 				timer->context.tmar);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
 				timer->context.tsicr);
-	__raw_writel(timer->context.tier, timer->irq_ena);
+	writel_relaxed(timer->context.tier, timer->irq_ena);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG,
 				timer->context.tclr);
 }
@@ -699,9 +699,9 @@ int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask)
 	omap_dm_timer_enable(timer);
 
 	if (timer->revision == 1)
-		l = __raw_readl(timer->irq_ena) & ~mask;
+		l = readl_relaxed(timer->irq_ena) & ~mask;
 
-	__raw_writel(l, timer->irq_dis);
+	writel_relaxed(l, timer->irq_dis);
 	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask;
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, l);
 
@@ -722,7 +722,7 @@ unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
 		return 0;
 	}
 
-	l = __raw_readl(timer->irq_stat);
+	l = readl_relaxed(timer->irq_stat);
 
 	return l;
 }
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 2861b155485a..dd79f3005cdf 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -280,20 +280,20 @@ static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
 						int posted)
 {
 	if (posted)
-		while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
+		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
 			cpu_relax();
 
-	return __raw_readl(timer->func_base + (reg & 0xff));
+	return readl_relaxed(timer->func_base + (reg & 0xff));
 }
 
 static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
 					u32 reg, u32 val, int posted)
 {
 	if (posted)
-		while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
+		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
 			cpu_relax();
 
-	__raw_writel(val, timer->func_base + (reg & 0xff));
+	writel_relaxed(val, timer->func_base + (reg & 0xff));
 }
 
 static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
@@ -301,7 +301,7 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
 	u32 tidr;
 
 	/* Assume v1 ip if bits [31:16] are zero */
-	tidr = __raw_readl(timer->io_base);
+	tidr = readl_relaxed(timer->io_base);
 	if (!(tidr >> 16)) {
 		timer->revision = 1;
 		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
@@ -385,7 +385,7 @@ static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
 	}
 
 	/* Ack possibly pending interrupt */
-	__raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
+	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
 }
 
 static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
@@ -399,7 +399,7 @@ static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
 static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
 						unsigned int value)
 {
-	__raw_writel(value, timer->irq_ena);
+	writel_relaxed(value, timer->irq_ena);
 	__omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
 }
 
@@ -412,7 +412,7 @@ __omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
 static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
 						unsigned int value)
 {
-	__raw_writel(value, timer->irq_stat);
+	writel_relaxed(value, timer->irq_stat);
 }
 
 #endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/arch/arm/plat-omap/include/plat/timex.h b/arch/arm/plat-omap/include/plat/timex.h
deleted file mode 100644
index e27d2daa7790..000000000000
--- a/arch/arm/plat-omap/include/plat/timex.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/timex.h
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author:  Greg Lonnon <glonnon@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
-#define __ASM_ARCH_OMAP_TIMEX_H
-
-#define CLOCK_TICK_RATE		(HZ * 100000UL)
-
-#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 830ff07f3385..3ec6e8e8d368 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -595,14 +595,16 @@ void __init orion_spi_1_init(unsigned long mapbase)
 /*****************************************************************************
  * Watchdog
  ****************************************************************************/
-static struct resource orion_wdt_resource =
-		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
+static struct resource orion_wdt_resource[] = {
+		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
+		DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
+};
 
 static struct platform_device orion_wdt_device = {
 	.name		= "orion_wdt",
 	.id		= -1,
-	.num_resources	= 1,
-	.resource	= &orion_wdt_resource,
+	.num_resources	= ARRAY_SIZE(orion_wdt_resource),
+	.resource	= orion_wdt_resource,
 };
 
 void __init orion_wdt_init(void)
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 6816192a7561..b61a3bcc2fa8 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -597,51 +597,3 @@ void __init orion_gpio_init(struct device_node *np,
 
 	orion_gpio_chip_count++;
 }
-
-#ifdef CONFIG_OF
-static void __init orion_gpio_of_init_one(struct device_node *np,
-					  int irq_gpio_base)
-{
-	int ngpio, gpio_base, mask_offset;
-	void __iomem *base;
-	int ret, i;
-	int irqs[4];
-	int secondary_irq_base;
-
-	ret = of_property_read_u32(np, "ngpio", &ngpio);
-	if (ret)
-		goto out;
-	ret = of_property_read_u32(np, "mask-offset", &mask_offset);
-	if (ret == -EINVAL)
-		mask_offset = 0;
-	else
-		goto out;
-	base = of_iomap(np, 0);
-	if (!base)
-		goto out;
-
-	secondary_irq_base = irq_gpio_base + (32 * orion_gpio_chip_count);
-	gpio_base = 32 * orion_gpio_chip_count;
-
-	/* Get the interrupt numbers. Each chip can have up to 4
-	 * interrupt handlers, with each handler dealing with 8 GPIO
-	 * pins. */
-
-	for (i = 0; i < 4; i++)
-		irqs[i] = irq_of_parse_and_map(np, i);
-
-	orion_gpio_init(np, gpio_base, ngpio, base, mask_offset,
-			secondary_irq_base, irqs);
-	return;
-out:
-	pr_err("%s: %s: missing mandatory property\n", __func__, np->name);
-}
-
-void __init orion_gpio_of_init(int irq_gpio_base)
-{
-	struct device_node *np;
-
-	for_each_compatible_node(np, NULL, "marvell,orion-gpio")
-		orion_gpio_of_init_one(np, irq_gpio_base);
-}
-#endif
diff --git a/arch/arm/plat-orion/include/plat/irq.h b/arch/arm/plat-orion/include/plat/irq.h
index 50547e417936..96be19e9bd93 100644
--- a/arch/arm/plat-orion/include/plat/irq.h
+++ b/arch/arm/plat-orion/include/plat/irq.h
@@ -12,5 +12,4 @@
 #define __PLAT_IRQ_H
 
 void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr);
-void __init orion_dt_init_irq(void);
 #endif
diff --git a/arch/arm/plat-orion/include/plat/orion-gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h
index 614dcac9dc52..e763988b04b9 100644
--- a/arch/arm/plat-orion/include/plat/orion-gpio.h
+++ b/arch/arm/plat-orion/include/plat/orion-gpio.h
@@ -33,5 +33,4 @@ void __init orion_gpio_init(struct device_node *np,
 			    int secondary_irq_base,
 			    int irq[4]);
 
-void __init orion_gpio_of_init(int irq_gpio_base);
 #endif
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index 807df142444b..8c1fc06007c0 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -20,47 +20,6 @@
 #include <plat/orion-gpio.h>
 #include <mach/bridge-regs.h>
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- *
- * Notes:
- * - this is prepared for Kirkwood and Dove only, update
- *   accordingly if you add Orion5x or MV78x00.
- * - Orion5x uses different macro names and has only one
- *   set of CAUSE/MASK registers.
- * - MV78x00 uses the same macro names but has a third
- *   set of CAUSE/MASK registers.
- *
- */
-
-static void __iomem *orion_irq_base = IRQ_VIRT_BASE;
-
-asmlinkage void
-__exception_irq_entry orion_legacy_handle_irq(struct pt_regs *regs)
-{
-	u32 stat;
-
-	stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_LOW_OFF);
-	stat &= readl_relaxed(orion_irq_base + IRQ_MASK_LOW_OFF);
-	if (stat) {
-		unsigned int hwirq = __fls(stat);
-		handle_IRQ(hwirq, regs);
-		return;
-	}
-	stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_HIGH_OFF);
-	stat &= readl_relaxed(orion_irq_base + IRQ_MASK_HIGH_OFF);
-	if (stat) {
-		unsigned int hwirq = 32 + __fls(stat);
-		handle_IRQ(hwirq, regs);
-		return;
-	}
-}
-#endif
-
 void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
 {
 	struct irq_chip_generic *gc;
@@ -78,40 +37,4 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
 	ct->chip.irq_unmask = irq_gc_mask_set_bit;
 	irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE,
 			       IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-	set_handle_irq(orion_legacy_handle_irq);
-#endif
-}
-
-#ifdef CONFIG_OF
-static int __init orion_add_irq_domain(struct device_node *np,
-				       struct device_node *interrupt_parent)
-{
-	int i = 0;
-	void __iomem *base;
-
-	do {
-		base = of_iomap(np, i);
-		if (base) {
-			orion_irq_init(i * 32, base + 0x04);
-			i++;
-		}
-	} while (base);
-
-	irq_domain_add_legacy(np, i * 32, 0, 0,
-			      &irq_domain_simple_ops, NULL);
-	return 0;
-}
-
-static const struct of_device_id orion_irq_match[] = {
-	{ .compatible = "marvell,orion-intc",
-	  .data = orion_add_irq_domain, },
-	{},
-};
-
-void __init orion_dt_init_irq(void)
-{
-	of_irq_init(orion_irq_match);
 }
-#endif
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 58645a58d0d8..243dfcb2ca0e 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -9,7 +9,7 @@ config PLAT_SAMSUNG
 	depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P || ARCH_EXYNOS
 	default y
 	select GENERIC_IRQ_CHIP
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	help
 	  Base platform code for all Samsung SoC based systems
 
@@ -19,7 +19,7 @@ config PLAT_S5P
 	default y
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select PLAT_SAMSUNG
 	select S3C_GPIO_TRACK
 	select S5P_GPIO_DRVSTR
@@ -427,8 +427,7 @@ comment "Power management"
 
 config SAMSUNG_PM_DEBUG
 	bool "S3C2410 PM Suspend debug"
-	depends on PM
-	select DEBUG_LL
+	depends on PM && DEBUG_KERNEL && DEBUG_S3C_UART
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
@@ -445,7 +444,8 @@ config S3C_PM_DEBUG_LED_SMDK
 
 config SAMSUNG_PM_CHECK
 	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PM && CRC32
+	depends on PM
+	select CRC32
 	help
 	  Enable the PM code's memory area checksum over sleep. This option
 	  will generate CRCs of all blocks of memory, and store them before
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 9267d29549b4..5e5beaa9ae15 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -4,6 +4,9 @@
 #
 # Licensed under GPLv2
 
+ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
+ccflags-$(CONFIG_ARCH_EXYNOS)	+= -I$(srctree)/arch/arm/mach-exynos/include
+
 obj-y				:=
 obj-m				:=
 obj-n				:= dummy.o
@@ -47,9 +50,11 @@ obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
 
 # PM support
 
+obj-$(CONFIG_PM_SLEEP)		+= pm-common.o
 obj-$(CONFIG_SAMSUNG_PM)	+= pm.o
 obj-$(CONFIG_SAMSUNG_PM_GPIO)	+= pm-gpio.o
 obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
+obj-$(CONFIG_SAMSUNG_PM_DEBUG)	+= pm-debug.o
 
 obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
 obj-$(CONFIG_SAMSUNG_WDT_RESET)	+= watchdog-reset.o
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 47c9fad43f00..d103ac1a52af 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -43,7 +43,6 @@
 #include <linux/debugfs.h>
 #endif
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <plat/cpu-freq.h>
@@ -52,7 +51,7 @@
 #include <plat/cpu.h>
 
 #include <linux/serial_core.h>
-#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
+#include <linux/serial_s3c.h> /* for s3c24xx_uart_devs */
 
 /* clock information */
 
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
index 46b426e8aff5..364963a0a344 100644
--- a/arch/arm/plat-samsung/cpu.c
+++ b/arch/arm/plat-samsung/cpu.c
@@ -28,13 +28,6 @@ unsigned int samsung_rev(void)
 }
 EXPORT_SYMBOL(samsung_rev);
 
-void __init s3c24xx_init_cpu(void)
-{
-	/* nothing here yet */
-
-	samsung_cpu_rev = 0;
-}
-
 void __init s3c64xx_init_cpu(void)
 {
 	samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index ac07e871f6a7..ead4f1c94058 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -18,6 +18,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
@@ -30,6 +31,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mmc/host.h>
 #include <linux/ioport.h>
+#include <linux/sizes.h>
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
 #include <linux/platform_data/dma-s3c24xx.h>
@@ -41,7 +43,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/hardware.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
 #include <mach/map.h>
@@ -64,7 +65,6 @@
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
-#include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
 #include <linux/platform_data/spi-s3c64xx.h>
 
@@ -744,10 +744,7 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	if (!pd) {
 		pd = &default_i2c_data;
 
-		if (soc_is_exynos4210() ||
-		    soc_is_exynos4212() || soc_is_exynos4412())
-			pd->bus_num = 8;
-		else if (soc_is_s5pv210())
+		if (soc_is_s5pv210())
 			pd->bus_num = 3;
 		else
 			pd->bus_num = 0;
@@ -764,10 +761,7 @@ void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
 {
 	struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
 
-	if (soc_is_exynos4210() ||
-	    soc_is_exynos4212() || soc_is_exynos4412())
-		pd->hdmiphy_bus = 8;
-	else if (soc_is_s5pv210())
+	if (soc_is_s5pv210())
 		pd->hdmiphy_bus = 3;
 	else
 		pd->hdmiphy_bus = 0;
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
index 7231c8e4975e..72d4178ad23b 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -119,6 +119,7 @@ struct s3c_plltab {
 struct s3c_cpufreq_config {
 	struct s3c_freq		freq;
 	struct s3c_freq		max;
+	struct clk		*mpll;
 	struct cpufreq_frequency_table pll;
 	struct s3c_clkdivs	divs;
 	struct s3c_cpufreq_info *info;	/* for core, not drivers */
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 335beb341355..5a237db9f9eb 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -20,6 +20,9 @@
 
 extern unsigned long samsung_cpu_id;
 
+#define S3C2410_CPU_ID		0x32410000
+#define S3C2410_CPU_MASK	0xFFFFFFFF
+
 #define S3C24XX_CPU_ID		0x32400000
 #define S3C24XX_CPU_MASK	0xFFF00000
 
@@ -40,22 +43,13 @@ extern unsigned long samsung_cpu_id;
 #define S5PV210_CPU_ID		0x43110000
 #define S5PV210_CPU_MASK	0xFFFFF000
 
-#define EXYNOS4210_CPU_ID	0x43210000
-#define EXYNOS4212_CPU_ID	0x43220000
-#define EXYNOS4412_CPU_ID	0xE4412200
-#define EXYNOS4_CPU_MASK	0xFFFE0000
-
-#define EXYNOS5250_SOC_ID	0x43520000
-#define EXYNOS5420_SOC_ID	0xE5420000
-#define EXYNOS5440_SOC_ID	0xE5440000
-#define EXYNOS5_SOC_MASK	0xFFFFF000
-
 #define IS_SAMSUNG_CPU(name, id, mask)		\
 static inline int is_samsung_##name(void)	\
 {						\
 	return ((samsung_cpu_id & mask) == (id & mask));	\
 }
 
+IS_SAMSUNG_CPU(s3c2410, S3C2410_CPU_ID, S3C2410_CPU_MASK)
 IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
 IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
 IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
@@ -64,20 +58,16 @@ IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
 IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
-IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
-IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
     defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
     defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
     defined(CONFIG_CPU_S3C2443)
 # define soc_is_s3c24xx()	is_samsung_s3c24xx()
+# define soc_is_s3c2410()	is_samsung_s3c2410()
 #else
 # define soc_is_s3c24xx()	0
+# define soc_is_s3c2410()	0
 #endif
 
 #if defined(CONFIG_CPU_S3C2412)
@@ -120,46 +110,6 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_s5pv210()	0
 #endif
 
-#if defined(CONFIG_CPU_EXYNOS4210)
-# define soc_is_exynos4210()	is_samsung_exynos4210()
-#else
-# define soc_is_exynos4210()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4212)
-# define soc_is_exynos4212()	is_samsung_exynos4212()
-#else
-# define soc_is_exynos4212()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4412)
-# define soc_is_exynos4412()	is_samsung_exynos4412()
-#else
-# define soc_is_exynos4412()	0
-#endif
-
-#define EXYNOS4210_REV_0	(0x0)
-#define EXYNOS4210_REV_1_0	(0x10)
-#define EXYNOS4210_REV_1_1	(0x11)
-
-#if defined(CONFIG_SOC_EXYNOS5250)
-# define soc_is_exynos5250()	is_samsung_exynos5250()
-#else
-# define soc_is_exynos5250()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5420)
-# define soc_is_exynos5420()	is_samsung_exynos5420()
-#else
-# define soc_is_exynos5420()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5440)
-# define soc_is_exynos5440()	is_samsung_exynos5440()
-#else
-# define soc_is_exynos5440()	0
-#endif
-
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef KHZ
@@ -199,7 +149,6 @@ extern void s5p_init_irq(u32 *vic, u32 num_vic);
 
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
 
-extern void s3c24xx_init_cpu(void);
 extern void s3c64xx_init_cpu(void);
 extern void s5p_init_cpu(void __iomem *cpuid_addr);
 
@@ -230,7 +179,6 @@ extern struct bus_type s3c2443_subsys;
 extern struct bus_type s3c6410_subsys;
 extern struct bus_type s5p64x0_subsys;
 extern struct bus_type s5pv210_subsys;
-extern struct bus_type exynos_subsys;
 
 extern void (*s5pc1xx_idle)(void);
 
diff --git a/arch/arm/plat-samsung/include/plat/mfc.h b/arch/arm/plat-samsung/include/plat/mfc.h
index e6d7c42d68b6..033654e91e22 100644
--- a/arch/arm/plat-samsung/include/plat/mfc.h
+++ b/arch/arm/plat-samsung/include/plat/mfc.h
@@ -32,7 +32,4 @@ struct s5p_mfc_dt_meminfo {
 void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
 				phys_addr_t lbase, unsigned int lsize);
 
-int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname,
-				int depth, void *data);
-
 #endif /* __PLAT_SAMSUNG_MFC_H */
diff --git a/arch/arm/plat-samsung/include/plat/pm-common.h b/arch/arm/plat-samsung/include/plat/pm-common.h
new file mode 100644
index 000000000000..8705f9e0e288
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/pm-common.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *	Tomasz Figa <t.figa@samsung.com>
+ * Copyright (c) 2004 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_PM_COMMON_H
+#define __PLAT_SAMSUNG_PM_COMMON_H __FILE__
+
+#include <linux/irq.h>
+
+/* sleep save info */
+
+/**
+ * struct sleep_save - save information for shared peripherals.
+ * @reg: Pointer to the register to save.
+ * @val: Holder for the value saved from reg.
+ *
+ * This describes a list of registers which is used by the pm core and
+ * other subsystem to save and restore register values over suspend.
+ */
+struct sleep_save {
+	void __iomem	*reg;
+	unsigned long	val;
+};
+
+#define SAVE_ITEM(x) \
+	{ .reg = (x) }
+
+/* helper functions to save/restore lists of registers. */
+
+extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);
+
+/* PM debug functions */
+
+/**
+ * struct pm_uart_save - save block for core UART
+ * @ulcon: Save value for S3C2410_ULCON
+ * @ucon: Save value for S3C2410_UCON
+ * @ufcon: Save value for S3C2410_UFCON
+ * @umcon: Save value for S3C2410_UMCON
+ * @ubrdiv: Save value for S3C2410_UBRDIV
+ *
+ * Save block for UART registers to be held over sleep and restored if they
+ * are needed (say by debug).
+*/
+struct pm_uart_save {
+	u32	ulcon;
+	u32	ucon;
+	u32	ufcon;
+	u32	umcon;
+	u32	ubrdiv;
+	u32	udivslot;
+};
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+/**
+ * s3c_pm_dbg() - low level debug function for use in suspend/resume.
+ * @msg: The message to print.
+ *
+ * This function is used mainly to debug the resume process before the system
+ * can rely on printk/console output. It uses the low-level debugging output
+ * routine printascii() to do its work.
+ */
+extern void s3c_pm_dbg(const char *msg, ...);
+
+/**
+ * s3c_pm_debug_init() - suspend/resume low level debug initialization.
+ * @base: Virtual base of UART to use for suspend/resume debugging.
+ *
+ * This function needs to be called before S3C_PMDBG() can be used, to set up
+ * UART port base address and configuration.
+ */
+extern void s3c_pm_debug_init(void);
+
+#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
+
+extern void s3c_pm_save_uarts(void);
+extern void s3c_pm_restore_uarts(void);
+#else
+#define S3C_PMDBG(fmt...) pr_debug(fmt)
+#define s3c_pm_debug_init() do { } while (0)
+
+static inline void s3c_pm_save_uarts(void) { }
+static inline void s3c_pm_restore_uarts(void) { }
+#endif
+
+/* suspend memory checking */
+
+#ifdef CONFIG_SAMSUNG_PM_CHECK
+extern void s3c_pm_check_prepare(void);
+extern void s3c_pm_check_restore(void);
+extern void s3c_pm_check_cleanup(void);
+extern void s3c_pm_check_store(void);
+#else
+#define s3c_pm_check_prepare() do { } while (0)
+#define s3c_pm_check_restore() do { } while (0)
+#define s3c_pm_check_cleanup() do { } while (0)
+#define s3c_pm_check_store()   do { } while (0)
+#endif
+
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index ff6063f0d5ea..e17d871b934c 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -15,7 +15,7 @@
  * management
 */
 
-#include <linux/irq.h>
+#include <plat/pm-common.h>
 
 struct device;
 
@@ -54,56 +54,10 @@ extern int (*pm_cpu_sleep)(unsigned long);
 
 extern unsigned long s3c_pm_flags;
 
-extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
-
 /* from sleep.S */
 
 extern int s3c2410_cpu_suspend(unsigned long);
 
-/* sleep save info */
-
-/**
- * struct sleep_save - save information for shared peripherals.
- * @reg: Pointer to the register to save.
- * @val: Holder for the value saved from reg.
- *
- * This describes a list of registers which is used by the pm core and
- * other subsystem to save and restore register values over suspend.
- */
-struct sleep_save {
-	void __iomem	*reg;
-	unsigned long	val;
-};
-
-#define SAVE_ITEM(x) \
-	{ .reg = (x) }
-
-/**
- * struct pm_uart_save - save block for core UART
- * @ulcon: Save value for S3C2410_ULCON
- * @ucon: Save value for S3C2410_UCON
- * @ufcon: Save value for S3C2410_UFCON
- * @umcon: Save value for S3C2410_UMCON
- * @ubrdiv: Save value for S3C2410_UBRDIV
- *
- * Save block for UART registers to be held over sleep and restored if they
- * are needed (say by debug).
-*/
-struct pm_uart_save {
-	u32	ulcon;
-	u32	ucon;
-	u32	ufcon;
-	u32	umcon;
-	u32	ubrdiv;
-	u32	udivslot;
-};
-
-/* helper functions to save/restore lists of registers. */
-
-extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);
-
 #ifdef CONFIG_SAMSUNG_PM
 extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
 extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
@@ -114,24 +68,6 @@ extern void s3c_cpu_resume(void);
 #define s3c_cpu_resume NULL
 #endif
 
-/* PM debug functions */
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-/**
- * s3c_pm_dbg() - low level debug function for use in suspend/resume.
- * @msg: The message to print.
- *
- * This function is used mainly to debug the resume process before the system
- * can rely on printk/console output. It uses the low-level debugging output
- * routine printascii() to do its work.
- */
-extern void s3c_pm_dbg(const char *msg, ...);
-
-#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
-#else
-#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
-#endif
-
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
 /**
  * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
@@ -144,20 +80,6 @@ extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
 static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
 #endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
 
-/* suspend memory checking */
-
-#ifdef CONFIG_SAMSUNG_PM_CHECK
-extern void s3c_pm_check_prepare(void);
-extern void s3c_pm_check_restore(void);
-extern void s3c_pm_check_cleanup(void);
-extern void s3c_pm_check_store(void);
-#else
-#define s3c_pm_check_prepare() do { } while(0)
-#define s3c_pm_check_restore() do { } while(0)
-#define s3c_pm_check_cleanup() do { } while(0)
-#define s3c_pm_check_store()   do { } while(0)
-#endif
-
 /**
  * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
  *
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
deleted file mode 100644
index f05f2afa440d..000000000000
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/serial_s3c.h>
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
deleted file mode 100644
index f48dc0a4736c..000000000000
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/uncompress.h
- *
- * Copyright 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_UNCOMPRESS_H
-#define __ASM_PLAT_UNCOMPRESS_H
-
-typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
-
-/* uart setup */
-
-unsigned int fifo_mask;
-unsigned int fifo_max;
-
-volatile u8 *uart_base;
-
-/* forward declerations */
-
-static void arch_detect_cpu(void);
-
-/* defines for UART registers */
-
-#include <plat/regs-serial.h>
-
-/* working in physical space... */
-#define S3C_WDOGREG(x)	((S3C_PA_WDT + (x)))
-
-#define S3C2410_WTCON	S3C_WDOGREG(0x00)
-#define S3C2410_WTDAT	S3C_WDOGREG(0x04)
-#define S3C2410_WTCNT	S3C_WDOGREG(0x08)
-
-#define S3C2410_WTCON_RSTEN	(1 << 0)
-#define S3C2410_WTCON_ENABLE	(1 << 5)
-
-#define S3C2410_WTCON_DIV128	(3 << 3)
-
-#define S3C2410_WTCON_PRESCALE(x)	((x) << 8)
-
-/* how many bytes we allow into the FIFO at a time in FIFO mode */
-#define FIFO_MAX	 (14)
-
-static __inline__ void
-uart_wr(unsigned int reg, unsigned int val)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	*ptr = val;
-}
-
-static __inline__ unsigned int
-uart_rd(unsigned int reg)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	return *ptr;
-}
-
-/* we can deal with the case the UARTs are being run
- * in FIFO mode, so that we don't hold up our execution
- * waiting for tx to happen...
-*/
-
-static void putc(int ch)
-{
-	if (!config_enabled(CONFIG_DEBUG_LL))
-		return;
-
-	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
-		int level;
-
-		while (1) {
-			level = uart_rd(S3C2410_UFSTAT);
-			level &= fifo_mask;
-
-			if (level < fifo_max)
-				break;
-		}
-
-	} else {
-		/* not using fifos */
-
-		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
-			barrier();
-	}
-
-	/* write byte to transmission register */
-	uart_wr(S3C2410_UTXH, ch);
-}
-
-static inline void flush(void)
-{
-}
-
-#define __raw_writel(d, ad)			\
-	do {							\
-		*((volatile unsigned int __force *)(ad)) = (d); \
-	} while (0)
-
-#ifdef CONFIG_S3C_BOOT_ERROR_RESET
-
-static void arch_decomp_error(const char *x)
-{
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System resetting\n");
-
-	__raw_writel(0x4000, S3C2410_WTDAT);
-	__raw_writel(0x4000, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
-
-	while(1);
-}
-
-#define arch_error arch_decomp_error
-#endif
-
-#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
-static inline void arch_enable_uart_fifo(void)
-{
-	u32 fifocon;
-
-	if (!config_enabled(CONFIG_DEBUG_LL))
-		return;
-
-	fifocon = uart_rd(S3C2410_UFCON);
-
-	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
-		fifocon |= S3C2410_UFCON_RESETBOTH;
-		uart_wr(S3C2410_UFCON, fifocon);
-
-		/* wait for fifo reset to complete */
-		while (1) {
-			fifocon = uart_rd(S3C2410_UFCON);
-			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
-				break;
-		}
-
-		uart_wr(S3C2410_UFCON, S3C2410_UFCON_FIFOMODE);
-	}
-}
-#else
-#define arch_enable_uart_fifo() do { } while(0)
-#endif
-
-
-static void
-arch_decomp_setup(void)
-{
-	/* we may need to setup the uart(s) here if we are not running
-	 * on an BAST... the BAST will have left the uarts configured
-	 * after calling linux.
-	 */
-
-	arch_detect_cpu();
-
-	/* Enable the UART FIFOs if they where not enabled and our
-	 * configuration says we should turn them on.
-	 */
-
-	arch_enable_uart_fifo();
-}
-
-
-#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index aa9511b6914a..a1f925f3121f 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -21,11 +21,10 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
 
-#include <mach/hardware.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -33,8 +32,6 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
-#include <plat/regs-serial.h>
-
 static struct cpu_table *cpu;
 
 static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
@@ -97,7 +94,9 @@ void __init s3c24xx_init_clocks(int xtal)
 #if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
 static int nr_uarts __initdata = 0;
 
+#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
 static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
+#endif
 
 /* s3c24xx_init_uartdevs
  *
@@ -112,6 +111,7 @@ void __init s3c24xx_init_uartdevs(char *name,
 				  struct s3c24xx_uart_resources *res,
 				  struct s3c2410_uartcfg *cfg, int no)
 {
+#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
 	struct platform_device *platdev;
 	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
 	struct s3c24xx_uart_resources *resp;
@@ -134,6 +134,7 @@ void __init s3c24xx_init_uartdevs(char *name,
 	}
 
 	nr_uarts = no;
+#endif
 }
 
 void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c
index 3cbd62666b1e..04aff2c31b46 100644
--- a/arch/arm/plat-samsung/pm-check.c
+++ b/arch/arm/plat-samsung/pm-check.c
@@ -19,7 +19,7 @@
 #include <linux/ioport.h>
 #include <linux/slab.h>
 
-#include <plat/pm.h>
+#include <plat/pm-common.h>
 
 #if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
 #error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
diff --git a/arch/arm/plat-samsung/pm-common.c b/arch/arm/plat-samsung/pm-common.c
new file mode 100644
index 000000000000..515cd53372bd
--- /dev/null
+++ b/arch/arm/plat-samsung/pm-common.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *	Tomasz Figa <t.figa@samsung.com>
+ * Copyright (C) 2008 Openmoko, Inc.
+ * Copyright (C) 2004-2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung common power management helper functions.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <plat/pm-common.h>
+
+/* helper functions to save and restore register state */
+
+/**
+ * s3c_pm_do_save() - save a set of registers for restoration on resume.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Run through the list of registers given, saving their contents in the
+ * array for later restoration when we wakeup.
+ */
+void s3c_pm_do_save(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		ptr->val = __raw_readl(ptr->reg);
+		S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+	}
+}
+
+/**
+ * s3c_pm_do_restore() - restore register values from the save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Restore the register values saved from s3c_pm_do_save().
+ *
+ * Note, we do not use S3C_PMDBG() in here, as the system may not have
+ * restore the UARTs state yet
+*/
+
+void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		pr_debug("restore %p (restore %08lx, was %08x)\n",
+				ptr->reg, ptr->val, __raw_readl(ptr->reg));
+
+		__raw_writel(ptr->val, ptr->reg);
+	}
+}
+
+/**
+ * s3c_pm_do_restore_core() - early restore register values from save list.
+ *
+ * This is similar to s3c_pm_do_restore() except we try and minimise the
+ * side effects of the function in case registers that hardware might need
+ * to work has been restored.
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++)
+		__raw_writel(ptr->val, ptr->reg);
+}
diff --git a/arch/arm/plat-samsung/pm-debug.c b/arch/arm/plat-samsung/pm-debug.c
new file mode 100644
index 000000000000..8f19f66388dd
--- /dev/null
+++ b/arch/arm/plat-samsung/pm-debug.c
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *	Tomasz Figa <t.figa@samsung.com>
+ * Copyright (C) 2008 Openmoko, Inc.
+ * Copyright (C) 2004-2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung common power management (suspend to RAM) debug support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/pm-common.h>
+
+#ifdef CONFIG_SAMSUNG_ATAGS
+#include <mach/pm-core.h>
+#else
+static inline void s3c_pm_debug_init_uart(void) {}
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save) {}
+#endif
+
+static struct pm_uart_save uart_save;
+
+extern void printascii(const char *);
+
+void s3c_pm_dbg(const char *fmt, ...)
+{
+	va_list va;
+	char buff[256];
+
+	va_start(va, fmt);
+	vsnprintf(buff, sizeof(buff), fmt, va);
+	va_end(va);
+
+	printascii(buff);
+}
+
+void s3c_pm_debug_init(void)
+{
+	/* restart uart clocks so we can use them to output */
+	s3c_pm_debug_init_uart();
+}
+
+static inline void __iomem *s3c_pm_uart_base(void)
+{
+	unsigned long paddr;
+	unsigned long vaddr;
+
+	debug_ll_addr(&paddr, &vaddr);
+
+	return (void __iomem *)vaddr;
+}
+
+void s3c_pm_save_uarts(void)
+{
+	void __iomem *regs = s3c_pm_uart_base();
+	struct pm_uart_save *save = &uart_save;
+
+	save->ulcon = __raw_readl(regs + S3C2410_ULCON);
+	save->ucon = __raw_readl(regs + S3C2410_UCON);
+	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
+	save->umcon = __raw_readl(regs + S3C2410_UMCON);
+	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+
+	if (!soc_is_s3c2410())
+		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
+
+	S3C_PMDBG("UART[%p]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
+		  regs, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
+}
+
+void s3c_pm_restore_uarts(void)
+{
+	void __iomem *regs = s3c_pm_uart_base();
+	struct pm_uart_save *save = &uart_save;
+
+	s3c_pm_arch_update_uart(regs, save);
+
+	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
+	__raw_writel(save->ucon,  regs + S3C2410_UCON);
+	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
+	__raw_writel(save->umcon, regs + S3C2410_UMCON);
+	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+
+	if (!soc_is_s3c2410())
+		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
+}
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index dd4c15d0d68f..da268813901b 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -196,8 +196,7 @@ struct samsung_gpio_pm samsung_gpio_pm_2bit = {
 	.resume = samsung_gpio_pm_2bit_resume,
 };
 
-#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) \
-	|| defined(CONFIG_ARCH_EXYNOS)
+#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
 static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
 {
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
@@ -307,7 +306,7 @@ struct samsung_gpio_pm samsung_gpio_pm_4bit = {
 	.save	= samsung_gpio_pm_4bit_save,
 	.resume = samsung_gpio_pm_4bit_resume,
 };
-#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P || CONFIG_ARCH_EXYNOS */
+#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
 
 /**
  * samsung_pm_save_gpio() - save gpio chip data for suspend
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index e5b0f2c2d884..f8c0f9797dcf 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -17,16 +17,13 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/of.h>
-#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
 #include <asm/suspend.h>
 
-#include <plat/regs-serial.h>
-
 #ifdef CONFIG_SAMSUNG_ATAGS
-#include <mach/hardware.h>
 #include <mach/map.h>
 #ifndef CONFIG_ARCH_EXYNOS
 #include <mach/regs-clock.h>
@@ -44,93 +41,6 @@
 
 unsigned long s3c_pm_flags;
 
-/* Debug code:
- *
- * This code supports debug output to the low level UARTs for use on
- * resume before the console layer is available.
-*/
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-extern void printascii(const char *);
-
-void s3c_pm_dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vsnprintf(buff, sizeof(buff), fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
-static inline void s3c_pm_debug_init(void)
-{
-	/* restart uart clocks so we can use them to output */
-	s3c_pm_debug_init_uart();
-}
-
-#else
-#define s3c_pm_debug_init() do { } while(0)
-
-#endif /* CONFIG_SAMSUNG_PM_DEBUG */
-
-/* Save the UART configurations if we are configured for debug. */
-
-unsigned char pm_uart_udivslot;
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-
-static struct pm_uart_save uart_save;
-
-static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
-{
-	void __iomem *regs = S3C_VA_UARTx(uart);
-
-	save->ulcon = __raw_readl(regs + S3C2410_ULCON);
-	save->ucon = __raw_readl(regs + S3C2410_UCON);
-	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
-	save->umcon = __raw_readl(regs + S3C2410_UMCON);
-	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
-
-	if (pm_uart_udivslot)
-		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
-
-	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
-		  uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
-}
-
-static void s3c_pm_save_uarts(void)
-{
-	s3c_pm_save_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
-}
-
-static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
-{
-	void __iomem *regs = S3C_VA_UARTx(uart);
-
-	s3c_pm_arch_update_uart(regs, save);
-
-	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
-	__raw_writel(save->ucon,  regs + S3C2410_UCON);
-	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
-	__raw_writel(save->umcon, regs + S3C2410_UMCON);
-	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
-
-	if (pm_uart_udivslot)
-		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
-}
-
-static void s3c_pm_restore_uarts(void)
-{
-	s3c_pm_restore_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
-}
-#else
-static void s3c_pm_save_uarts(void) { }
-static void s3c_pm_restore_uarts(void) { }
-#endif
-
 /* The IRQ ext-int code goes here, it is too small to currently bother
  * with its own file. */
 
@@ -155,62 +65,6 @@ int s3c_irqext_wake(struct irq_data *data, unsigned int state)
 	return 0;
 }
 
-/* helper functions to save and restore register state */
-
-/**
- * s3c_pm_do_save() - save a set of registers for restoration on resume.
- * @ptr: Pointer to an array of registers.
- * @count: Size of the ptr array.
- *
- * Run through the list of registers given, saving their contents in the
- * array for later restoration when we wakeup.
- */
-void s3c_pm_do_save(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		ptr->val = __raw_readl(ptr->reg);
-		S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
-	}
-}
-
-/**
- * s3c_pm_do_restore() - restore register values from the save list.
- * @ptr: Pointer to an array of registers.
- * @count: Size of the ptr array.
- *
- * Restore the register values saved from s3c_pm_do_save().
- *
- * Note, we do not use S3C_PMDBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
-
-void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
-		       ptr->reg, ptr->val, __raw_readl(ptr->reg));
-
-		__raw_writel(ptr->val, ptr->reg);
-	}
-}
-
-/**
- * s3c_pm_do_restore_core() - early restore register values from save list.
- *
- * This is similar to s3c_pm_do_restore() except we try and minimise the
- * side effects of the function in case registers that hardware might need
- * to work has been restored.
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
-
-void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++)
-		__raw_writel(ptr->val, ptr->reg);
-}
-
 /* s3c2410_pm_show_resume_irqs
  *
  * print any IRQs asserted at resume time (ie, we woke from)
diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c
index ad51f85fbd01..469b86260fe3 100644
--- a/arch/arm/plat-samsung/s5p-dev-mfc.c
+++ b/arch/arm/plat-samsung/s5p-dev-mfc.c
@@ -122,32 +122,35 @@ device_initcall(s5p_mfc_memory_init);
 #endif
 
 #ifdef CONFIG_OF
-int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname,
+int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
 				int depth, void *data)
 {
-	__be32 *prop;
-	unsigned long len;
-	struct s5p_mfc_dt_meminfo *mfc_mem = data;
+	const __be32 *prop;
+	int len;
+	struct s5p_mfc_dt_meminfo mfc_mem;
 
 	if (!data)
 		return 0;
 
-	if (!of_flat_dt_is_compatible(node, mfc_mem->compatible))
+	if (!of_flat_dt_is_compatible(node, data))
 		return 0;
 
 	prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len);
 	if (!prop || (len != 2 * sizeof(unsigned long)))
 		return 0;
 
-	mfc_mem->loff = be32_to_cpu(prop[0]);
-	mfc_mem->lsize = be32_to_cpu(prop[1]);
+	mfc_mem.loff = be32_to_cpu(prop[0]);
+	mfc_mem.lsize = be32_to_cpu(prop[1]);
 
 	prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len);
 	if (!prop || (len != 2 * sizeof(unsigned long)))
 		return 0;
 
-	mfc_mem->roff = be32_to_cpu(prop[0]);
-	mfc_mem->rsize = be32_to_cpu(prop[1]);
+	mfc_mem.roff = be32_to_cpu(prop[0]);
+	mfc_mem.rsize = be32_to_cpu(prop[1]);
+
+	s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize,
+			mfc_mem.loff, mfc_mem.lsize);
 
 	return 1;
 }
diff --git a/arch/arm/plat-samsung/s5p-dev-uart.c b/arch/arm/plat-samsung/s5p-dev-uart.c
index cafa3deddcc1..8c4487af98c8 100644
--- a/arch/arm/plat-samsung/s5p-dev-uart.c
+++ b/arch/arm/plat-samsung/s5p-dev-uart.c
@@ -18,7 +18,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
-#include <mach/hardware.h>
 #include <mach/map.h>
 
 #include <plat/devs.h>
diff --git a/arch/arm/plat-samsung/s5p-irq-pm.c b/arch/arm/plat-samsung/s5p-irq-pm.c
index 591498035916..52b16943617e 100644
--- a/arch/arm/plat-samsung/s5p-irq-pm.c
+++ b/arch/arm/plat-samsung/s5p-irq-pm.c
@@ -22,10 +22,7 @@
 #include <mach/map.h>
 
 #include <mach/regs-gpio.h>
-
-#ifndef CONFIG_ARCH_EXYNOS
 #include <mach/regs-irq.h>
-#endif
 
 /* state for IRQs over sleep */
 
@@ -43,18 +40,8 @@ int s3c_irq_wake(struct irq_data *data, unsigned int state)
 	unsigned long irqbit;
 	unsigned int irq_rtc_tic, irq_rtc_alarm;
 
-#ifdef CONFIG_ARCH_EXYNOS
-	if (soc_is_exynos5250()) {
-		irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
-		irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
-	} else {
-		irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
-		irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
-	}
-#else
 	irq_rtc_tic = IRQ_RTC_TIC;
 	irq_rtc_alarm = IRQ_RTC_ALARM;
-#endif
 
 	if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
 		irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
diff --git a/arch/arm/plat-samsung/s5p-sleep.S b/arch/arm/plat-samsung/s5p-sleep.S
index a030e7301da8..25c68ceb9e2b 100644
--- a/arch/arm/plat-samsung/s5p-sleep.S
+++ b/arch/arm/plat-samsung/s5p-sleep.S
@@ -22,19 +22,7 @@
 */
 
 #include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
 
-#define CPU_MASK	0xff0ffff0
-#define CPU_CORTEX_A9	0x410fc090
-
-/*
- *	 The following code is located into the .data section. This is to
- *	 allow l2x0_regs_phys to be accessed with a relative load while we
- *	 can't rely on any MMU translation. We could have put l2x0_regs_phys
- *	 in the .text section as well, but some setups might insist on it to
- *	 be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
- */
 	.data
 	.align
 
@@ -53,37 +41,5 @@
 	 */
 
 ENTRY(s3c_cpu_resume)
-#ifdef CONFIG_CACHE_L2X0
-	mrc	p15, 0, r0, c0, c0, 0
-	ldr	r1, =CPU_MASK
-	and	r0, r0, r1
-	ldr	r1, =CPU_CORTEX_A9
-	cmp	r0, r1
-	bne	resume_l2on
-	adr	r0, l2x0_regs_phys
-	ldr	r0, [r0]
-	ldr	r1, [r0, #L2X0_R_PHY_BASE]
-	ldr	r2, [r1, #L2X0_CTRL]
-	tst	r2, #0x1
-	bne	resume_l2on
-	ldr	r2, [r0, #L2X0_R_AUX_CTRL]
-	str	r2, [r1, #L2X0_AUX_CTRL]
-	ldr	r2, [r0, #L2X0_R_TAG_LATENCY]
-	str	r2, [r1, #L2X0_TAG_LATENCY_CTRL]
-	ldr	r2, [r0, #L2X0_R_DATA_LATENCY]
-	str	r2, [r1, #L2X0_DATA_LATENCY_CTRL]
-	ldr	r2, [r0, #L2X0_R_PREFETCH_CTRL]
-	str	r2, [r1, #L2X0_PREFETCH_CTRL]
-	ldr	r2, [r0, #L2X0_R_PWR_CTRL]
-	str	r2, [r1, #L2X0_POWER_CTRL]
-	mov	r2, #1
-	str	r2, [r1, #L2X0_CTRL]
-resume_l2on:
-#endif
 	b	cpu_resume
 ENDPROC(s3c_cpu_resume)
-#ifdef CONFIG_CACHE_L2X0
-	.globl l2x0_regs_phys
-l2x0_regs_phys:
-	.long	0
-#endif
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 2c4332b9f948..fce41e93b6a4 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -6,12 +6,6 @@ config PLAT_VERSATILE_CLOCK
 config PLAT_VERSATILE_CLCD
 	bool
 
-config PLAT_VERSATILE_LEDS
-	def_bool y if NEW_LEDS
-	depends on ARCH_REALVIEW || ARCH_VERSATILE
-	select LEDS_CLASS
-	select LEDS_TRIGGERS
-
 config PLAT_VERSATILE_SCHED_CLOCK
 	def_bool y
 
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index f88d448b629c..2e0c472958ae 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -2,6 +2,5 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
 
 obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o
 obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o
-obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o
 obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c
deleted file mode 100644
index d2490d00b46c..000000000000
--- a/arch/arm/plat-versatile/leds.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Driver for the 8 user LEDs found on the RealViews and Versatiles
- * Based on DaVinci's DM365 board code
- *
- * License terms: GNU General Public License (GPL) version 2
- * Author: Linus Walleij <triad@df.lth.se>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-#ifdef VERSATILE_SYS_BASE
-#define LEDREG	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
-#endif
-
-#ifdef REALVIEW_SYS_BASE
-#define LEDREG	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
-#endif
-
-struct versatile_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} versatile_leds[] = {
-	{ "versatile:0", "heartbeat", },
-	{ "versatile:1", "mmc0", },
-	{ "versatile:2", "cpu0" },
-	{ "versatile:3", "cpu1" },
-	{ "versatile:4", "cpu2" },
-	{ "versatile:5", "cpu3" },
-	{ "versatile:6", },
-	{ "versatile:7", },
-};
-
-static void versatile_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct versatile_led *led = container_of(cdev,
-						 struct versatile_led, cdev);
-	u32 reg = readl(LEDREG);
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-	writel(reg, LEDREG);
-}
-
-static enum led_brightness versatile_led_get(struct led_classdev *cdev)
-{
-	struct versatile_led *led = container_of(cdev,
-						 struct versatile_led, cdev);
-	u32 reg = readl(LEDREG);
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init versatile_leds_init(void)
-{
-	int i;
-
-	/* All ON */
-	writel(0xff, LEDREG);
-	for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) {
-		struct versatile_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = versatile_leds[i].name;
-		led->cdev.brightness_set = versatile_led_set;
-		led->cdev.brightness_get = versatile_led_get;
-		led->cdev.default_trigger = versatile_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(versatile_leds_init);
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index 46e17492fd1f..fe6ca574d093 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -8,9 +8,12 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/init.h>
+#include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/vfpmacros.h>
-#include "../kernel/entry-header.S"
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
 
 @ VFP entry point.
 @
@@ -19,15 +22,10 @@
 @  r9  = normal "successful" return address
 @  r10 = this threads thread_info structure
 @  lr  = unrecognised instruction return address
-@  IRQs disabled.
+@  IRQs enabled.
 @
 ENTRY(do_vfp)
-#ifdef CONFIG_PREEMPT_COUNT
-	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
-	add	r11, r4, #1		@ increment it
-	str	r11, [r10, #TI_PREEMPT]
-#endif
-	enable_irq
+	inc_preempt_count r10, r4
  	ldr	r4, .LCvfp
 	ldr	r11, [r10, #TI_CPU]	@ CPU number
 	add	r10, r10, #TI_VFPSTATE	@ r10 = workspace
@@ -35,12 +33,7 @@ ENTRY(do_vfp)
 ENDPROC(do_vfp)
 
 ENTRY(vfp_null_entry)
-#ifdef CONFIG_PREEMPT_COUNT
-	get_thread_info	r10
-	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
-	sub	r11, r4, #1		@ decrement it
-	str	r11, [r10, #TI_PREEMPT]
-#endif
+	dec_preempt_count_ti r10, r4
 	mov	pc, lr
 ENDPROC(vfp_null_entry)
 
@@ -53,12 +46,7 @@ ENDPROC(vfp_null_entry)
 
 	__INIT
 ENTRY(vfp_testing_entry)
-#ifdef CONFIG_PREEMPT_COUNT
-	get_thread_info	r10
-	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
-	sub	r11, r4, #1		@ decrement it
-	str	r11, [r10, #TI_PREEMPT]
-#endif
+	dec_preempt_count_ti r10, r4
 	ldr	r0, VFP_arch_address
 	str	r0, [r0]		@ set to non-zero value
 	mov	pc, r9			@ we have handled the fault
diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c
index 6cac43bd1d86..423f56dd4028 100644
--- a/arch/arm/vfp/vfpdouble.c
+++ b/arch/arm/vfp/vfpdouble.c
@@ -866,6 +866,8 @@ vfp_double_multiply_accumulate(int dd, int dn, int dm, u32 fpscr, u32 negate, ch
 		vdp.sign = vfp_sign_negate(vdp.sign);
 
 	vfp_double_unpack(&vdn, vfp_get_double(dd));
+	if (vdn.exponent == 0 && vdn.significand)
+		vfp_double_normalise_denormal(&vdn);
 	if (negate & NEG_SUBTRACT)
 		vdn.sign = vfp_sign_negate(vdn.sign);
 
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 3e5d3115a2a6..be807625ed8c 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -14,10 +14,13 @@
  * r10 points at the start of the private FP workspace in the thread structure
  * sp points to a struct pt_regs (as defined in include/asm/proc/ptrace.h)
  */
+#include <linux/init.h>
+#include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/vfpmacros.h>
 #include <linux/kern_levels.h>
-#include "../kernel/entry-header.S"
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
 
 	.macro	DBGSTR, str
 #ifdef DEBUG
@@ -179,12 +182,7 @@ vfp_hw_state_valid:
 					@ else it's one 32-bit instruction, so
 					@ always subtract 4 from the following
 					@ instruction address.
-#ifdef CONFIG_PREEMPT_COUNT
-	get_thread_info	r10
-	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
-	sub	r11, r4, #1		@ decrement it
-	str	r11, [r10, #TI_PREEMPT]
-#endif
+	dec_preempt_count_ti r10, r4
 	mov	pc, r9			@ we think we have handled things
 
 
@@ -203,12 +201,7 @@ look_for_VFP_exceptions:
 	@ not recognised by VFP
 
 	DBGSTR	"not VFP"
-#ifdef CONFIG_PREEMPT_COUNT
-	get_thread_info	r10
-	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
-	sub	r11, r4, #1		@ decrement it
-	str	r11, [r10, #TI_PREEMPT]
-#endif
+	dec_preempt_count_ti r10, r4
 	mov	pc, lr
 
 process_exception:
diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c
index b252631b406b..4f96c1617aae 100644
--- a/arch/arm/vfp/vfpsingle.c
+++ b/arch/arm/vfp/vfpsingle.c
@@ -915,6 +915,8 @@ vfp_single_multiply_accumulate(int sd, int sn, s32 m, u32 fpscr, u32 negate, cha
 	v = vfp_get_float(sd);
 	pr_debug("VFP: s%u = %08x\n", sd, v);
 	vfp_single_unpack(&vsn, v);
+	if (vsn.exponent == 0 && vsn.significand)
+		vfp_single_normalise_denormal(&vsn);
 	if (negate & NEG_SUBTRACT)
 		vsn.sign = vfp_sign_negate(vsn.sign);
 
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index b96723e258a0..1e632430570b 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -339,6 +339,14 @@ static int __init xen_pm_init(void)
 }
 late_initcall(xen_pm_init);
 
+
+/* empty stubs */
+void xen_arch_pre_suspend(void) { }
+void xen_arch_post_suspend(int suspend_cancelled) { }
+void xen_timer_resume(void) { }
+void xen_arch_resume(void) { }
+
+
 /* In the hypervisor.S file. */
 EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op);
@@ -350,4 +358,5 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_vcpu_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_tmem_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_multicall);
 EXPORT_SYMBOL_GPL(privcmd_call);
diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S
index d1cf7b7c2200..44e3a5f10c4c 100644
--- a/arch/arm/xen/hypercall.S
+++ b/arch/arm/xen/hypercall.S
@@ -89,6 +89,7 @@ HYPERCALL2(memory_op);
 HYPERCALL2(physdev_op);
 HYPERCALL3(vcpu_op);
 HYPERCALL1(tmem_op);
+HYPERCALL2(multicall);
 
 ENTRY(privcmd_call)
 	stmdb sp!, {r4}
diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c
index b31ee1b275b0..97baf4427817 100644
--- a/arch/arm/xen/p2m.c
+++ b/arch/arm/xen/p2m.c
@@ -146,6 +146,38 @@ unsigned long __mfn_to_pfn(unsigned long mfn)
 }
 EXPORT_SYMBOL_GPL(__mfn_to_pfn);
 
+int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops,
+			    struct gnttab_map_grant_ref *kmap_ops,
+			    struct page **pages, unsigned int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		if (map_ops[i].status)
+			continue;
+		set_phys_to_machine(map_ops[i].host_addr >> PAGE_SHIFT,
+				    map_ops[i].dev_bus_addr >> PAGE_SHIFT);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(set_foreign_p2m_mapping);
+
+int clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops,
+			      struct gnttab_map_grant_ref *kmap_ops,
+			      struct page **pages, unsigned int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		set_phys_to_machine(unmap_ops[i].host_addr >> PAGE_SHIFT,
+				    INVALID_P2M_ENTRY);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(clear_foreign_p2m_mapping);
+
 bool __set_phys_to_machine_multi(unsigned long pfn,
 		unsigned long mfn, unsigned long nr_pages)
 {