diff options
Diffstat (limited to 'arch/avr32/mach-at32ap/pm-at32ap700x.S')
| -rw-r--r-- | arch/avr32/mach-at32ap/pm-at32ap700x.S | 167 |
1 files changed, 0 insertions, 167 deletions
diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S deleted file mode 100644 index 1c8e4e6bff03..000000000000 --- a/arch/avr32/mach-at32ap/pm-at32ap700x.S +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Low-level Power Management code. - * - * Copyright (C) 2008 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <asm/asm.h> -#include <asm/asm-offsets.h> -#include <asm/thread_info.h> -#include <mach/pm.h> - -#include "pm.h" -#include "sdramc.h" - -/* Same as 0xfff00000 but fits in a 21 bit signed immediate */ -#define PM_BASE -0x100000 - - /* Keep this close to the irq handlers */ - .section .irq.text, "ax", @progbits - - /* - * void cpu_enter_idle(void) - * - * Put the CPU into "idle" mode, in which it will consume - * significantly less power. - * - * If an interrupt comes along in the window between - * unmask_interrupts and the sleep instruction below, the - * interrupt code will adjust the return address so that we - * never execute the sleep instruction. This is required - * because the AP7000 doesn't unmask interrupts when entering - * sleep modes; later CPUs may not need this workaround. - */ - .global cpu_enter_idle - .type cpu_enter_idle, @function -cpu_enter_idle: - mask_interrupts - get_thread_info r8 - ld.w r9, r8[TI_flags] - bld r9, TIF_NEED_RESCHED - brcs .Lret_from_sleep - sbr r9, TIF_CPU_GOING_TO_SLEEP - st.w r8[TI_flags], r9 - unmask_interrupts - sleep CPU_SLEEP_IDLE - .size cpu_enter_idle, . - cpu_enter_idle - - /* - * Common return path for PM functions that don't run from - * SRAM. - */ - .global cpu_idle_skip_sleep - .type cpu_idle_skip_sleep, @function -cpu_idle_skip_sleep: - mask_interrupts - ld.w r9, r8[TI_flags] - cbr r9, TIF_CPU_GOING_TO_SLEEP - st.w r8[TI_flags], r9 -.Lret_from_sleep: - unmask_interrupts - retal r12 - .size cpu_idle_skip_sleep, . - cpu_idle_skip_sleep - -#ifdef CONFIG_PM - .section .init.text, "ax", @progbits - - .global pm_exception - .type pm_exception, @function -pm_exception: - /* - * Exceptions are masked when we switch to this handler, so - * we'll only get "unrecoverable" exceptions (offset 0.) - */ - sub r12, pc, . - .Lpanic_msg - lddpc pc, .Lpanic_addr - - .align 2 -.Lpanic_addr: - .long panic -.Lpanic_msg: - .asciz "Unrecoverable exception during suspend\n" - .size pm_exception, . - pm_exception - - .global pm_irq0 - .type pm_irq0, @function -pm_irq0: - /* Disable interrupts and return after the sleep instruction */ - mfsr r9, SYSREG_RSR_INT0 - mtsr SYSREG_RAR_INT0, r8 - sbr r9, SYSREG_GM_OFFSET - mtsr SYSREG_RSR_INT0, r9 - rete - - /* - * void cpu_enter_standby(unsigned long sdramc_base) - * - * Enter PM_SUSPEND_STANDBY mode. At this point, all drivers - * are suspended and interrupts are disabled. Interrupts - * marked as 'wakeup' event sources may still come along and - * get us out of here. - * - * The SDRAM will be put into self-refresh mode (which does - * not require a clock from the CPU), and the CPU will be put - * into "frozen" mode (HSB bus stopped). The SDRAM controller - * will automatically bring the SDRAM into normal mode on the - * first access, and the power manager will automatically - * start the HSB and CPU clocks upon a wakeup event. - * - * This code uses the same "skip sleep" technique as above. - * It is very important that we jump directly to - * cpu_after_sleep after the sleep instruction since that's - * where we'll end up if the interrupt handler decides that we - * need to skip the sleep instruction. - */ - .global pm_standby - .type pm_standby, @function -pm_standby: - /* - * interrupts are already masked at this point, and EVBA - * points to pm_exception above. - */ - ld.w r10, r12[SDRAMC_LPR] - sub r8, pc, . - 1f /* return address for irq handler */ - mov r11, SDRAMC_LPR_LPCB_SELF_RFR - bfins r10, r11, 0, 2 /* LPCB <- self Refresh */ - sync 0 /* flush write buffer */ - st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */ - ld.w r11, r12[SDRAMC_LPR] - unmask_interrupts - sleep CPU_SLEEP_FROZEN -1: mask_interrupts - retal r12 - .size pm_standby, . - pm_standby - - .global pm_suspend_to_ram - .type pm_suspend_to_ram, @function -pm_suspend_to_ram: - /* - * interrupts are already masked at this point, and EVBA - * points to pm_exception above. - */ - mov r11, 0 - cache r11[2], 8 /* clean all dcache lines */ - sync 0 /* flush write buffer */ - ld.w r10, r12[SDRAMC_LPR] - sub r8, pc, . - 1f /* return address for irq handler */ - mov r11, SDRAMC_LPR_LPCB_SELF_RFR - bfins r10, r11, 0, 2 /* LPCB <- self refresh */ - st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */ - ld.w r11, r12[SDRAMC_LPR] - - unmask_interrupts - sleep CPU_SLEEP_STOP -1: mask_interrupts - - retal r12 - .size pm_suspend_to_ram, . - pm_suspend_to_ram - - .global pm_sram_end - .type pm_sram_end, @function -pm_sram_end: - .size pm_sram_end, 0 - -#endif /* CONFIG_PM */ |