diff options
Diffstat (limited to 'arch/blackfin/Kconfig')
| -rw-r--r-- | arch/blackfin/Kconfig | 185 |
1 files changed, 174 insertions, 11 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 373a6902d8fa..7f3c589cc024 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -37,6 +37,7 @@ config BLACKFIN select GENERIC_IRQ_PROBE select IRQ_PER_CPU if SMP select HAVE_NMI_WATCHDOG if NMI_WATCHDOG + select GENERIC_SMP_IDLE_THREAD config GENERIC_CSUM def_bool y @@ -226,6 +227,12 @@ config BF561 help BF561 Processor Support. +config BF609 + bool "BF609" + select CLKDEV_LOOKUP + help + BF609 Processor Support. + endchoice config SMP @@ -251,27 +258,27 @@ config HOTPLUG_CPU config BF_REV_MIN int - default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) + default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x default 2 if (BF537 || BF536 || BF534) default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM) default 4 if (BF538 || BF539) config BF_REV_MAX int - default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) + default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x default 3 if (BF537 || BF536 || BF534 || BF54xM) default 5 if (BF561 || BF538 || BF539) default 6 if (BF533 || BF532 || BF531) choice prompt "Silicon Rev" - default BF_REV_0_0 if (BF51x || BF52x) + default BF_REV_0_0 if (BF51x || BF52x || BF60x) default BF_REV_0_2 if (BF534 || BF536 || BF537 || (BF54x && !BF54xM)) default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561) config BF_REV_0_0 bool "0.0" - depends on (BF51x || BF52x || (BF54x && !BF54xM)) + depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x) config BF_REV_0_1 bool "0.1" @@ -350,6 +357,7 @@ source "arch/blackfin/mach-bf561/Kconfig" source "arch/blackfin/mach-bf537/Kconfig" source "arch/blackfin/mach-bf538/Kconfig" source "arch/blackfin/mach-bf548/Kconfig" +source "arch/blackfin/mach-bf609/Kconfig" menu "Board customizations" @@ -379,6 +387,12 @@ config BOOT_LOAD memory region is used to capture NULL pointer references as well as some core kernel functions. +config PHY_RAM_BASE_ADDRESS + hex "Physical RAM Base" + default 0x0 + help + set BF609 FPGA physical SRAM base address + config ROM_BASE hex "Kernel ROM Base" depends on ROMKERNEL @@ -422,7 +436,7 @@ config BFIN_KERNEL_CLOCK config PLL_BYPASS bool "Bypass PLL" - depends on BFIN_KERNEL_CLOCK + depends on BFIN_KERNEL_CLOCK && (!BF60x) default n config CLKIN_HALF @@ -441,7 +455,7 @@ config VCO_MULT default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT) default "22" if BFIN533_BLUETECHNIX_CM default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM) - default "20" if BFIN561_EZKIT + default "20" if (BFIN561_EZKIT || BF609) default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD) default "25" if BFIN527_AD7160EVAL help @@ -473,12 +487,45 @@ config SCLK_DIV int "System Clock Divider" depends on BFIN_KERNEL_CLOCK range 1 15 - default 5 + default 4 help - This sets the frequency of the system clock (including SDRAM or DDR). + This sets the frequency of the system clock (including SDRAM or DDR) on + !BF60x else it set the clock for system buses and provides the + source from which SCLK0 and SCLK1 are derived. This can be between 1 and 15 System Clock = (PLL frequency) / (this setting) +config SCLK0_DIV + int "System Clock0 Divider" + depends on BFIN_KERNEL_CLOCK && BF60x + range 1 15 + default 1 + help + This sets the frequency of the system clock0 for PVP and all other + peripherals not clocked by SCLK1. + This can be between 1 and 15 + System Clock0 = (System Clock) / (this setting) + +config SCLK1_DIV + int "System Clock1 Divider" + depends on BFIN_KERNEL_CLOCK && BF60x + range 1 15 + default 1 + help + This sets the frequency of the system clock1 (including SPORT, SPI and ACM). + This can be between 1 and 15 + System Clock1 = (System Clock) / (this setting) + +config DCLK_DIV + int "DDR Clock Divider" + depends on BFIN_KERNEL_CLOCK && BF60x + range 1 15 + default 2 + help + This sets the frequency of the DDR memory. + This can be between 1 and 15 + DDR Clock = (PLL frequency) / (this setting) + choice prompt "DDR SDRAM Chip Type" depends on BFIN_KERNEL_CLOCK @@ -494,7 +541,7 @@ endchoice choice prompt "DDR/SDRAM Timing" - depends on BFIN_KERNEL_CLOCK + depends on BFIN_KERNEL_CLOCK && !BF60x default BFIN_KERNEL_CLOCK_MEMINIT_CALC help This option allows you to specify Blackfin SDRAM/DDR Timing parameters @@ -576,6 +623,7 @@ config MAX_VCO_HZ default 600000000 if BF548 default 533333333 if BF549 default 600000000 if BF561 + default 800000000 if BF609 config MIN_VCO_HZ int @@ -583,6 +631,7 @@ config MIN_VCO_HZ config MAX_SCLK_HZ int + default 200000000 if BF609 default 133333333 config MIN_SCLK_HZ @@ -1051,7 +1100,7 @@ endchoice config BFIN_L2_DCACHEABLE bool "Enable DCACHE for L2 SRAM" depends on BFIN_DCACHE - depends on (BF54x || BF561) && !SMP + depends on (BF54x || BF561 || BF60x) && !SMP default n choice prompt "L2 SRAM DCACHE policy" @@ -1077,6 +1126,7 @@ config MPU comment "Asynchronous Memory Configuration" menu "EBIU_AMGCTL Global Control" + depends on !BF60x config C_AMCKEN bool "Enable CLKOUT" default y @@ -1127,6 +1177,7 @@ endchoice endmenu menu "EBIU_AMBCTL Control" + depends on !BF60x config BANK_0 hex "Bank 0 (AMBCTL0.L)" default 0x7BB0 @@ -1206,7 +1257,7 @@ config ARCH_SUSPEND_POSSIBLE choice prompt "Standby Power Saving Mode" - depends on PM + depends on PM && !BF60x default PM_BFIN_SLEEP_DEEPER config PM_BFIN_SLEEP_DEEPER bool "Sleep Deeper" @@ -1261,6 +1312,118 @@ config PM_BFIN_WAKE_GP On ADSP-BF549 this option enables the the same functionality on the /MRXON pin also PH7. +config PM_BFIN_WAKE_PA15 + bool "Allow Wake-Up from PA15" + depends on PM && BF60x + default n + help + Enable PA15 Wake-Up + +config PM_BFIN_WAKE_PA15_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PA15 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_PB15 + bool "Allow Wake-Up from PB15" + depends on PM && BF60x + default n + help + Enable PB15 Wake-Up + +config PM_BFIN_WAKE_PB15_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PB15 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_PC15 + bool "Allow Wake-Up from PC15" + depends on PM && BF60x + default n + help + Enable PC15 Wake-Up + +config PM_BFIN_WAKE_PC15_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PC15 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_PD06 + bool "Allow Wake-Up from PD06(ETH0_PHYINT)" + depends on PM && BF60x + default n + help + Enable PD06(ETH0_PHYINT) Wake-up + +config PM_BFIN_WAKE_PD06_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PD06 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_PE12 + bool "Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON)" + depends on PM && BF60x + default n + help + Enable PE12(ETH1_PHYINT, PUSH BUTTON) Wake-up + +config PM_BFIN_WAKE_PE12_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PE12 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_PG04 + bool "Allow Wake-Up from PG04(CAN0_RX)" + depends on PM && BF60x + default n + help + Enable PG04(CAN0_RX) Wake-up + +config PM_BFIN_WAKE_PG04_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PG04 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_PG13 + bool "Allow Wake-Up from PG13" + depends on PM && BF60x + default n + help + Enable PG13 Wake-Up + +config PM_BFIN_WAKE_PG13_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PG13 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_USB + bool "Allow Wake-Up from (USB)" + depends on PM && BF60x + default n + help + Enable (USB) Wake-up + +config PM_BFIN_WAKE_USB_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_USB + default 0 + help + Wake-Up priority 0(low) 1(high) + endmenu menu "CPU Frequency scaling" |