diff options
Diffstat (limited to '')
22 files changed, 771 insertions, 282 deletions
diff --git a/arch/blackfin/include/asm/bfin_dma.h b/arch/blackfin/include/asm/bfin_dma.h new file mode 100644 index 000000000000..d51120744148 --- /dev/null +++ b/arch/blackfin/include/asm/bfin_dma.h @@ -0,0 +1,91 @@ +/* + * bfin_dma.h - Blackfin DMA defines/structures/etc... + * + * Copyright 2004-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __ASM_BFIN_DMA_H__ +#define __ASM_BFIN_DMA_H__ + +#include <linux/types.h> + +/* DMA_CONFIG Masks */ +#define DMAEN 0x0001 /* DMA Channel Enable */ +#define WNR 0x0002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ +#define RESTART 0x0020 /* DMA Buffer Clear */ +#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ +#define DI_EN 0x0080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x0f00 /* Next Descriptor Size */ +#define DMAFLOW 0x7000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +/* DMA_IRQ_STATUS Masks */ +#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ +#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ + +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +#define __BFP(m) u16 m; u16 __pad_##m + +/* + * bfin dma registers layout + */ +struct bfin_dma_regs { + u32 next_desc_ptr; + u32 start_addr; + __BFP(config); + u32 __pad0; + __BFP(x_count); + __BFP(x_modify); + __BFP(y_count); + __BFP(y_modify); + u32 curr_desc_ptr; + u32 curr_addr; + __BFP(irq_status); + __BFP(peripheral_map); + __BFP(curr_x_count); + u32 __pad1; + __BFP(curr_y_count); + u32 __pad2; +}; + +/* + * bfin handshake mdma registers layout + */ +struct bfin_hmdma_regs { + __BFP(control); + __BFP(ecinit); + __BFP(bcinit); + __BFP(ecurgent); + __BFP(ecoverflow); + __BFP(ecount); + __BFP(bcount); +}; + +#undef __BFP + +#endif diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h new file mode 100644 index 000000000000..7dbc664eab1e --- /dev/null +++ b/arch/blackfin/include/asm/bfin_serial.h @@ -0,0 +1,277 @@ +/* + * bfin_serial.h - Blackfin UART/Serial definitions + * + * Copyright 2006-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_ASM_SERIAL_H__ +#define __BFIN_ASM_SERIAL_H__ + +#include <linux/serial_core.h> +#include <linux/spinlock.h> +#include <mach/anomaly.h> +#include <mach/bfin_serial.h> + +#if defined(CONFIG_BFIN_UART0_CTSRTS) || \ + defined(CONFIG_BFIN_UART1_CTSRTS) || \ + defined(CONFIG_BFIN_UART2_CTSRTS) || \ + defined(CONFIG_BFIN_UART3_CTSRTS) +# ifdef BFIN_UART_BF54X_STYLE +# define CONFIG_SERIAL_BFIN_HARD_CTSRTS +# else +# define CONFIG_SERIAL_BFIN_CTSRTS +# endif +#endif + +struct circ_buf; +struct timer_list; +struct work_struct; + +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; + int status_irq; +#ifndef BFIN_UART_BF54X_STYLE + unsigned int lsr; +#endif +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + spinlock_t rx_lock; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#elif ANOMALY_05000363 + unsigned int anomaly_threshold; +#endif +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + int scts; +#endif +#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ + defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) + int cts_pin; + int rts_pin; +#endif +}; + +/* UART_LCR Masks */ +#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ +#define STB 0x04 /* Stop Bits */ +#define PEN 0x08 /* Parity Enable */ +#define EPS 0x10 /* Even Parity Select */ +#define STP 0x20 /* Stick Parity */ +#define SB 0x40 /* Set Break */ +#define DLAB 0x80 /* Divisor Latch Access */ + +/* UART_LSR Masks */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x40 /* TSR and UART_THR Empty */ +#define TFI 0x80 /* Transmission Finished Indicator */ + +/* UART_IER Masks */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ +#define EDSSI 0x08 /* Enable Modem Status Interrupt */ +#define EDTPTI 0x10 /* Enable DMA Transmit PIRQ Interrupt */ +#define ETFI 0x20 /* Enable Transmission Finished Interrupt */ +#define ERFCI 0x40 /* Enable Receive FIFO Count Interrupt */ + +/* UART_MCR Masks */ +#define XOFF 0x01 /* Transmitter Off */ +#define MRTS 0x02 /* Manual Request To Send */ +#define RFIT 0x04 /* Receive FIFO IRQ Threshold */ +#define RFRT 0x08 /* Receive FIFO RTS Threshold */ +#define LOOP_ENA 0x10 /* Loopback Mode Enable */ +#define FCPOL 0x20 /* Flow Control Pin Polarity */ +#define ARTS 0x40 /* Automatic Request To Send */ +#define ACTS 0x80 /* Automatic Clear To Send */ + +/* UART_MSR Masks */ +#define SCTS 0x01 /* Sticky CTS */ +#define CTS 0x10 /* Clear To Send */ +#define RFCS 0x20 /* Receive FIFO Count Status */ + +/* UART_GCTL Masks */ +#define UCEN 0x01 /* Enable UARTx Clocks */ +#define IREN 0x02 /* Enable IrDA Mode */ +#define TPOLC 0x04 /* IrDA TX Polarity Change */ +#define RPOLC 0x08 /* IrDA RX Polarity Change */ +#define FPE 0x10 /* Force Parity Error On Transmit */ +#define FFE 0x20 /* Force Framing Error On Transmit */ + +#ifdef BFIN_UART_BF54X_STYLE +# define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +# define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +# define OFFSET_GCTL 0x08 /* Global Control Register */ +# define OFFSET_LCR 0x0C /* Line Control Register */ +# define OFFSET_MCR 0x10 /* Modem Control Register */ +# define OFFSET_LSR 0x14 /* Line Status Register */ +# define OFFSET_MSR 0x18 /* Modem Status Register */ +# define OFFSET_SCR 0x1C /* SCR Scratch Register */ +# define OFFSET_IER_SET 0x20 /* Set Interrupt Enable Register */ +# define OFFSET_IER_CLEAR 0x24 /* Clear Interrupt Enable Register */ +# define OFFSET_THR 0x28 /* Transmit Holding register */ +# define OFFSET_RBR 0x2C /* Receive Buffer register */ +#else /* BF533 style */ +# define OFFSET_THR 0x00 /* Transmit Holding register */ +# define OFFSET_RBR 0x00 /* Receive Buffer register */ +# define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +# define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +# define OFFSET_IER 0x04 /* Interrupt Enable Register */ +# define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +# define OFFSET_LCR 0x0C /* Line Control Register */ +# define OFFSET_MCR 0x10 /* Modem Control Register */ +# define OFFSET_LSR 0x14 /* Line Status Register */ +# define OFFSET_MSR 0x18 /* Modem Status Register */ +# define OFFSET_SCR 0x1C /* SCR Scratch Register */ +# define OFFSET_GCTL 0x24 /* Global Control Register */ +/* code should not need IIR, so force build error if they use it */ +# undef OFFSET_IIR +#endif + +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +#define __BFP(m) u16 m; u16 __pad_##m +struct bfin_uart_regs { +#ifdef BFIN_UART_BF54X_STYLE + __BFP(dll); + __BFP(dlh); + __BFP(gctl); + __BFP(lcr); + __BFP(mcr); + __BFP(lsr); + __BFP(msr); + __BFP(scr); + __BFP(ier_set); + __BFP(ier_clear); + __BFP(thr); + __BFP(rbr); +#else + union { + u16 dll; + u16 thr; + const u16 rbr; + }; + const u16 __pad0; + union { + u16 dlh; + u16 ier; + }; + const u16 __pad1; + const __BFP(iir); + __BFP(lcr); + __BFP(mcr); + __BFP(lsr); + __BFP(msr); + __BFP(scr); + const u32 __pad2; + __BFP(gctl); +#endif +}; +#undef __BFP + +#ifndef port_membase +# define port_membase(p) (((struct bfin_serial_port *)(p))->port.membase) +#endif + +#define UART_GET_CHAR(p) bfin_read16(port_membase(p) + OFFSET_RBR) +#define UART_GET_DLL(p) bfin_read16(port_membase(p) + OFFSET_DLL) +#define UART_GET_DLH(p) bfin_read16(port_membase(p) + OFFSET_DLH) +#define UART_GET_GCTL(p) bfin_read16(port_membase(p) + OFFSET_GCTL) +#define UART_GET_LCR(p) bfin_read16(port_membase(p) + OFFSET_LCR) +#define UART_GET_MCR(p) bfin_read16(port_membase(p) + OFFSET_MCR) +#define UART_GET_MSR(p) bfin_read16(port_membase(p) + OFFSET_MSR) + +#define UART_PUT_CHAR(p, v) bfin_write16(port_membase(p) + OFFSET_THR, v) +#define UART_PUT_DLL(p, v) bfin_write16(port_membase(p) + OFFSET_DLL, v) +#define UART_PUT_DLH(p, v) bfin_write16(port_membase(p) + OFFSET_DLH, v) +#define UART_PUT_GCTL(p, v) bfin_write16(port_membase(p) + OFFSET_GCTL, v) +#define UART_PUT_LCR(p, v) bfin_write16(port_membase(p) + OFFSET_LCR, v) +#define UART_PUT_MCR(p, v) bfin_write16(port_membase(p) + OFFSET_MCR, v) + +#ifdef BFIN_UART_BF54X_STYLE + +#define UART_CLEAR_IER(p, v) bfin_write16(port_membase(p) + OFFSET_IER_CLEAR, v) +#define UART_GET_IER(p) bfin_read16(port_membase(p) + OFFSET_IER_SET) +#define UART_SET_IER(p, v) bfin_write16(port_membase(p) + OFFSET_IER_SET, v) + +#define UART_CLEAR_DLAB(p) /* MMRs not muxed on BF54x */ +#define UART_SET_DLAB(p) /* MMRs not muxed on BF54x */ + +#define UART_CLEAR_LSR(p) bfin_write16(port_membase(p) + OFFSET_LSR, -1) +#define UART_GET_LSR(p) bfin_read16(port_membase(p) + OFFSET_LSR) +#define UART_PUT_LSR(p, v) bfin_write16(port_membase(p) + OFFSET_LSR, v) + +/* This handles hard CTS/RTS */ +#define BFIN_UART_CTSRTS_HARD +#define UART_CLEAR_SCTS(p) bfin_write16((port_membase(p) + OFFSET_MSR), SCTS) +#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS) +#define UART_DISABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) & ~(ARTS | MRTS)) +#define UART_ENABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS | ARTS) +#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) +#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) + +#else /* BF533 style */ + +#define UART_CLEAR_IER(p, v) UART_PUT_IER(p, UART_GET_IER(p) & ~(v)) +#define UART_GET_IER(p) bfin_read16(port_membase(p) + OFFSET_IER) +#define UART_PUT_IER(p, v) bfin_write16(port_membase(p) + OFFSET_IER, v) +#define UART_SET_IER(p, v) UART_PUT_IER(p, UART_GET_IER(p) | (v)) + +#define UART_CLEAR_DLAB(p) do { UART_PUT_LCR(p, UART_GET_LCR(p) & ~DLAB); SSYNC(); } while (0) +#define UART_SET_DLAB(p) do { UART_PUT_LCR(p, UART_GET_LCR(p) | DLAB); SSYNC(); } while (0) + +#ifndef put_lsr_cache +# define put_lsr_cache(p, v) (((struct bfin_serial_port *)(p))->lsr = (v)) +#endif +#ifndef get_lsr_cache +# define get_lsr_cache(p) (((struct bfin_serial_port *)(p))->lsr) +#endif + +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline void UART_CLEAR_LSR(void *p) +{ + put_lsr_cache(p, 0); + bfin_write16(port_membase(p) + OFFSET_LSR, -1); +} +static inline unsigned int UART_GET_LSR(void *p) +{ + unsigned int lsr = bfin_read16(port_membase(p) + OFFSET_LSR); + put_lsr_cache(p, get_lsr_cache(p) | (lsr & (BI|FE|PE|OE))); + return lsr | get_lsr_cache(p); +} +static inline void UART_PUT_LSR(void *p, uint16_t val) +{ + put_lsr_cache(p, get_lsr_cache(p) & ~val); +} + +/* This handles soft CTS/RTS */ +#define UART_GET_CTS(x) gpio_get_value((x)->cts_pin) +#define UART_DISABLE_RTS(x) gpio_set_value((x)->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value((x)->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + +#endif + +#ifndef BFIN_UART_TX_FIFO_SIZE +# define BFIN_UART_TX_FIFO_SIZE 2 +#endif + +#endif /* __BFIN_ASM_SERIAL_H__ */ diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index 3f7ef4d97791..29f4fd886174 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -108,7 +108,9 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) #define smp_mb__before_clear_bit() barrier() #define smp_mb__after_clear_bit() barrier() +#define test_bit __skip_test_bit #include <asm-generic/bitops/non-atomic.h> +#undef test_bit #endif /* CONFIG_SMP */ diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h index bd0641a267f1..568885a2c286 100644 --- a/arch/blackfin/include/asm/cache.h +++ b/arch/blackfin/include/asm/cache.h @@ -7,6 +7,8 @@ #ifndef __ARCH_BLACKFIN_CACHE_H #define __ARCH_BLACKFIN_CACHE_H +#include <linux/linkage.h> /* for asmlinkage */ + /* * Bytes per L1 cache line * Blackfin loads 32 bytes for cache diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h index 2666ff8ea952..77135b62818e 100644 --- a/arch/blackfin/include/asm/cacheflush.h +++ b/arch/blackfin/include/asm/cacheflush.h @@ -11,6 +11,9 @@ #include <asm/blackfin.h> /* for SSYNC() */ #include <asm/sections.h> /* for _ramend */ +#ifdef CONFIG_SMP +#include <asm/smp.h> +#endif extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address); extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address); diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index eedf3ca65ba2..d9dbc1a53534 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -14,40 +14,7 @@ #include <asm/blackfin.h> #include <asm/page.h> #include <asm-generic/dma.h> - -/* DMA_CONFIG Masks */ -#define DMAEN 0x0001 /* DMA Channel Enable */ -#define WNR 0x0002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ -#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ -#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ -#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ -#define RESTART 0x0020 /* DMA Buffer Clear */ -#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ -#define DI_EN 0x0080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define NDSIZE 0x0f00 /* Next Descriptor Size */ -#define DMAFLOW 0x7000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ - -/* DMA_IRQ_STATUS Masks */ -#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ -#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ -#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ -#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ +#include <asm/bfin_dma.h> /*------------------------- * config reg bits value @@ -149,7 +116,7 @@ void blackfin_dma_resume(void); * DMA API's *******************************************************************************/ extern struct dma_channel dma_ch[MAX_DMA_CHANNELS]; -extern struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS]; +extern struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS]; extern int channel2irq(unsigned int channel); static inline void set_dma_start_addr(unsigned int channel, unsigned long addr) diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h index efcc3aebeae4..3047120cfcff 100644 --- a/arch/blackfin/include/asm/dpmc.h +++ b/arch/blackfin/include/asm/dpmc.h @@ -9,6 +9,8 @@ #ifndef _BLACKFIN_DPMC_H_ #define _BLACKFIN_DPMC_H_ +#include <mach/pll.h> + /* PLL_CTL Masks */ #define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ #define PLL_OFF 0x0002 /* PLL Not Powered */ diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h index 234fbac17ec1..dccae26805b0 100644 --- a/arch/blackfin/include/asm/io.h +++ b/arch/blackfin/include/asm/io.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -7,148 +7,48 @@ #ifndef _BFIN_IO_H #define _BFIN_IO_H -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ -#include <linux/types.h> -#endif #include <linux/compiler.h> - -/* - * These are for ISA/PCI shared memory _only_ and should never be used - * on any other type of memory, including Zorro memory. They are meant to - * access the bus in the bus byte order which is little-endian!. - * - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the bfin architecture, we just read/write the - * memory location directly. - */ -#ifndef __ASSEMBLY__ - -static inline unsigned char readb(const volatile void __iomem *addr) -{ - unsigned int val; - int tmp; - - __asm__ __volatile__ ( - "cli %1;" - "NOP; NOP; SSYNC;" - "%0 = b [%2] (z);" - "sti %1;" - : "=d"(val), "=d"(tmp) - : "a"(addr) - ); - - return (unsigned char) val; -} - -static inline unsigned short readw(const volatile void __iomem *addr) -{ - unsigned int val; - int tmp; - - __asm__ __volatile__ ( - "cli %1;" - "NOP; NOP; SSYNC;" - "%0 = w [%2] (z);" - "sti %1;" - : "=d"(val), "=d"(tmp) - : "a"(addr) - ); - - return (unsigned short) val; -} - -static inline unsigned int readl(const volatile void __iomem *addr) -{ - unsigned int val; - int tmp; - - __asm__ __volatile__ ( - "cli %1;" - "NOP; NOP; SSYNC;" - "%0 = [%2];" - "sti %1;" - : "=d"(val), "=d"(tmp) - : "a"(addr) - ); - - return val; +#include <linux/types.h> +#include <asm/byteorder.h> + +#define DECLARE_BFIN_RAW_READX(size, type, asm, asm_sign) \ +static inline type __raw_read##size(const volatile void __iomem *addr) \ +{ \ + unsigned int val; \ + int tmp; \ + __asm__ __volatile__ ( \ + "cli %1;" \ + "NOP; NOP; SSYNC;" \ + "%0 = "#asm" [%2] "#asm_sign";" \ + "sti %1;" \ + : "=d"(val), "=d"(tmp) \ + : "a"(addr) \ + ); \ + return (type) val; \ } - -#endif /* __ASSEMBLY__ */ - -#define writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b)) -#define writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b)) -#define writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b)) - -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel -#define memset_io(a, b, c) memset((void *)(a), (b), (c)) -#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c)) -#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c)) - -/* Convert "I/O port addresses" to actual addresses. i.e. ugly casts. */ -#define __io(port) ((void *)(unsigned long)(port)) - -#define inb(port) readb(__io(port)) -#define inw(port) readw(__io(port)) -#define inl(port) readl(__io(port)) -#define outb(x, port) writeb(x, __io(port)) -#define outw(x, port) writew(x, __io(port)) -#define outl(x, port) writel(x, __io(port)) - -#define inb_p(port) inb(__io(port)) -#define inw_p(port) inw(__io(port)) -#define inl_p(port) inl(__io(port)) -#define outb_p(x, port) outb(x, __io(port)) -#define outw_p(x, port) outw(x, __io(port)) -#define outl_p(x, port) outl(x, __io(port)) - -#define ioread8_rep(a, d, c) readsb(a, d, c) -#define ioread16_rep(a, d, c) readsw(a, d, c) -#define ioread32_rep(a, d, c) readsl(a, d, c) -#define iowrite8_rep(a, s, c) writesb(a, s, c) -#define iowrite16_rep(a, s, c) writesw(a, s, c) -#define iowrite32_rep(a, s, c) writesl(a, s, c) - -#define ioread8(x) readb(x) -#define ioread16(x) readw(x) -#define ioread32(x) readl(x) -#define iowrite8(val, x) writeb(val, x) -#define iowrite16(val, x) writew(val, x) -#define iowrite32(val, x) writel(val, x) - -/** - * I/O write barrier - * - * Ensure ordering of I/O space writes. This will make sure that writes - * following the barrier will arrive after all previous writes. - */ -#define mmiowb() do { SSYNC(); wmb(); } while (0) - -#define IO_SPACE_LIMIT 0xffffffff - -/* Values for nocacheflag and cmode */ -#define IOMAP_NOCACHE_SER 1 - -#ifndef __ASSEMBLY__ +DECLARE_BFIN_RAW_READX(b, u8, b, (z)) +#define __raw_readb __raw_readb +DECLARE_BFIN_RAW_READX(w, u16, w, (z)) +#define __raw_readw __raw_readw +DECLARE_BFIN_RAW_READX(l, u32, , ) +#define __raw_readl __raw_readl extern void outsb(unsigned long port, const void *addr, unsigned long count); extern void outsw(unsigned long port, const void *addr, unsigned long count); extern void outsw_8(unsigned long port, const void *addr, unsigned long count); extern void outsl(unsigned long port, const void *addr, unsigned long count); +#define outsb outsb +#define outsw outsw +#define outsl outsl extern void insb(unsigned long port, void *addr, unsigned long count); extern void insw(unsigned long port, void *addr, unsigned long count); extern void insw_8(unsigned long port, void *addr, unsigned long count); extern void insl(unsigned long port, void *addr, unsigned long count); extern void insl_16(unsigned long port, void *addr, unsigned long count); +#define insb insb +#define insw insw +#define insl insl extern void dma_outsb(unsigned long port, const void *addr, unsigned short count); extern void dma_outsw(unsigned long port, const void *addr, unsigned short count); @@ -158,108 +58,14 @@ extern void dma_insb(unsigned long port, void *addr, unsigned short count); extern void dma_insw(unsigned long port, void *addr, unsigned short count); extern void dma_insl(unsigned long port, void *addr, unsigned short count); -static inline void readsl(const void __iomem *addr, void *buf, int len) -{ - insl((unsigned long)addr, buf, len); -} - -static inline void readsw(const void __iomem *addr, void *buf, int len) -{ - insw((unsigned long)addr, buf, len); -} - -static inline void readsb(const void __iomem *addr, void *buf, int len) -{ - insb((unsigned long)addr, buf, len); -} - -static inline void writesl(const void __iomem *addr, const void *buf, int len) -{ - outsl((unsigned long)addr, buf, len); -} - -static inline void writesw(const void __iomem *addr, const void *buf, int len) -{ - outsw((unsigned long)addr, buf, len); -} - -static inline void writesb(const void __iomem *addr, const void *buf, int len) -{ - outsb((unsigned long)addr, buf, len); -} - -/* - * Map some physical address range into the kernel address space. - */ -static inline void __iomem *__ioremap(unsigned long physaddr, unsigned long size, - int cacheflag) -{ - return (void __iomem *)physaddr; -} - -/* - * Unmap a ioremap()ed region again - */ -static inline void iounmap(void *addr) -{ -} - -/* - * __iounmap unmaps nearly everything, so be careful - * it doesn't free currently pointer/page tables anymore but it - * wans't used anyway and might be added later. - */ -static inline void __iounmap(void *addr, unsigned long size) -{ -} - -/* - * Set new cache mode for some kernel address space. - * The caller must push data for that range itself, if such data may already - * be in the cache. +/** + * I/O write barrier + * + * Ensure ordering of I/O space writes. This will make sure that writes + * following the barrier will arrive after all previous writes. */ -static inline void kernel_set_cachemode(void *addr, unsigned long size, - int cmode) -{ -} - -static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void __iomem *ioremap_nocache(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} +#define mmiowb() do { SSYNC(); wmb(); } while (0) -extern void blkfin_inv_cache_all(void); +#include <asm-generic/io.h> #endif - -#define ioport_map(port, nr) ((void __iomem*)(port)) -#define ioport_unmap(addr) - -/* Pages to physical address... */ -#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) - -#define phys_to_virt(vaddr) ((void *) (vaddr)) -#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) - -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __KERNEL__ */ - -#endif /* _BFIN_IO_H */ diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h index 41c4d70544ef..3365cb97f539 100644 --- a/arch/blackfin/include/asm/irqflags.h +++ b/arch/blackfin/include/asm/irqflags.h @@ -13,9 +13,6 @@ #ifdef CONFIG_SMP # include <asm/pda.h> # include <asm/processor.h> -/* Forward decl needed due to cdef inter dependencies */ -static inline uint32_t __pure bfin_dspid(void); -# define blackfin_core_id() (bfin_dspid() & 0xff) # define bfin_irq_flags cpu_pda[blackfin_core_id()].imask #else extern unsigned long bfin_irq_flags; diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index aea880274de7..8af7772e84cc 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -14,7 +14,7 @@ #define current_text_addr() ({ __label__ _l; _l: &&_l;}) #include <asm/ptrace.h> -#include <asm/blackfin.h> +#include <mach/blackfin.h> static inline unsigned long rdusp(void) { @@ -134,6 +134,8 @@ static inline uint32_t __pure bfin_dspid(void) return bfin_read_DSPID(); } +#define blackfin_core_id() (bfin_dspid() & 0xff) + static inline uint32_t __pure bfin_compiled_revid(void) { #if defined(CONFIG_BF_REV_0_0) diff --git a/arch/blackfin/include/asm/spinlock.h b/arch/blackfin/include/asm/spinlock.h index 1942ccfedbe0..1f286e71c21f 100644 --- a/arch/blackfin/include/asm/spinlock.h +++ b/arch/blackfin/include/asm/spinlock.h @@ -17,12 +17,12 @@ asmlinkage int __raw_spin_is_locked_asm(volatile int *ptr); asmlinkage void __raw_spin_lock_asm(volatile int *ptr); asmlinkage int __raw_spin_trylock_asm(volatile int *ptr); asmlinkage void __raw_spin_unlock_asm(volatile int *ptr); -asmlinkage void arch_read_lock_asm(volatile int *ptr); -asmlinkage int arch_read_trylock_asm(volatile int *ptr); -asmlinkage void arch_read_unlock_asm(volatile int *ptr); -asmlinkage void arch_write_lock_asm(volatile int *ptr); -asmlinkage int arch_write_trylock_asm(volatile int *ptr); -asmlinkage void arch_write_unlock_asm(volatile int *ptr); +asmlinkage void __raw_read_lock_asm(volatile int *ptr); +asmlinkage int __raw_read_trylock_asm(volatile int *ptr); +asmlinkage void __raw_read_unlock_asm(volatile int *ptr); +asmlinkage void __raw_write_lock_asm(volatile int *ptr); +asmlinkage int __raw_write_trylock_asm(volatile int *ptr); +asmlinkage void __raw_write_unlock_asm(volatile int *ptr); static inline int arch_spin_is_locked(arch_spinlock_t *lock) { @@ -64,32 +64,36 @@ static inline int arch_write_can_lock(arch_rwlock_t *rw) static inline void arch_read_lock(arch_rwlock_t *rw) { - arch_read_lock_asm(&rw->lock); + __raw_read_lock_asm(&rw->lock); } +#define arch_read_lock_flags(lock, flags) arch_read_lock(lock) + static inline int arch_read_trylock(arch_rwlock_t *rw) { - return arch_read_trylock_asm(&rw->lock); + return __raw_read_trylock_asm(&rw->lock); } static inline void arch_read_unlock(arch_rwlock_t *rw) { - arch_read_unlock_asm(&rw->lock); + __raw_read_unlock_asm(&rw->lock); } static inline void arch_write_lock(arch_rwlock_t *rw) { - arch_write_lock_asm(&rw->lock); + __raw_write_lock_asm(&rw->lock); } +#define arch_write_lock_flags(lock, flags) arch_write_lock(lock) + static inline int arch_write_trylock(arch_rwlock_t *rw) { - return arch_write_trylock_asm(&rw->lock); + return __raw_write_trylock_asm(&rw->lock); } static inline void arch_write_unlock(arch_rwlock_t *rw) { - arch_write_unlock_asm(&rw->lock); + __raw_write_unlock_asm(&rw->lock); } #define arch_spin_relax(lock) cpu_relax() diff --git a/arch/blackfin/include/mach-common/pll.h b/arch/blackfin/include/mach-common/pll.h new file mode 100644 index 000000000000..382178b361af --- /dev/null +++ b/arch/blackfin/include/mach-common/pll.h @@ -0,0 +1,86 @@ +/* + * Copyright 2005-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_COMMON_PLL_H +#define _MACH_COMMON_PLL_H + +#ifndef __ASSEMBLY__ + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +#ifndef bfin_iwr_restore +static inline void +bfin_iwr_restore(unsigned long iwr0, unsigned long iwr1, unsigned long iwr2) +{ +#ifdef SIC_IWR + bfin_write_SIC_IWR(iwr0); +#else + bfin_write_SIC_IWR0(iwr0); +# ifdef SIC_IWR1 + bfin_write_SIC_IWR1(iwr1); +# endif +# ifdef SIC_IWR2 + bfin_write_SIC_IWR2(iwr2); +# endif +#endif +} +#endif + +#ifndef bfin_iwr_save +static inline void +bfin_iwr_save(unsigned long niwr0, unsigned long niwr1, unsigned long niwr2, + unsigned long *iwr0, unsigned long *iwr1, unsigned long *iwr2) +{ +#ifdef SIC_IWR + *iwr0 = bfin_read_SIC_IWR(); +#else + *iwr0 = bfin_read_SIC_IWR0(); +# ifdef SIC_IWR1 + *iwr1 = bfin_read_SIC_IWR1(); +# endif +# ifdef SIC_IWR2 + *iwr2 = bfin_read_SIC_IWR2(); +# endif +#endif + bfin_iwr_restore(niwr0, niwr1, niwr2); +} +#endif + +static inline void _bfin_write_pll_relock(u32 addr, unsigned int val) +{ + unsigned long flags, iwr0, iwr1, iwr2; + + if (val == bfin_read_PLL_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + bfin_iwr_save(IWR_ENABLE(0), 0, 0, &iwr0, &iwr1, &iwr2); + + bfin_write16(addr, val); + SSYNC(); + asm("IDLE;"); + + bfin_iwr_restore(iwr0, iwr1, iwr2); + hard_local_irq_restore(flags); +} + +/* Writing to PLL_CTL initiates a PLL relock sequence */ +static inline void bfin_write_PLL_CTL(unsigned int val) +{ + _bfin_write_pll_relock(PLL_CTL, val); +} + +/* Writing to VR_CTL initiates a PLL relock sequence */ +static inline void bfin_write_VR_CTL(unsigned int val) +{ + _bfin_write_pll_relock(VR_CTL, val); +} + +#endif + +#endif diff --git a/arch/blackfin/include/mach-common/ports-a.h b/arch/blackfin/include/mach-common/ports-a.h new file mode 100644 index 000000000000..9f78a761c40a --- /dev/null +++ b/arch/blackfin/include/mach-common/ports-a.h @@ -0,0 +1,25 @@ +/* + * Port A Masks + */ + +#ifndef __BFIN_PERIPHERAL_PORT_A__ +#define __BFIN_PERIPHERAL_PORT_A__ + +#define PA0 (1 << 0) +#define PA1 (1 << 1) +#define PA2 (1 << 2) +#define PA3 (1 << 3) +#define PA4 (1 << 4) +#define PA5 (1 << 5) +#define PA6 (1 << 6) +#define PA7 (1 << 7) +#define PA8 (1 << 8) +#define PA9 (1 << 9) +#define PA10 (1 << 10) +#define PA11 (1 << 11) +#define PA12 (1 << 12) +#define PA13 (1 << 13) +#define PA14 (1 << 14) +#define PA15 (1 << 15) + +#endif diff --git a/arch/blackfin/include/mach-common/ports-b.h b/arch/blackfin/include/mach-common/ports-b.h new file mode 100644 index 000000000000..b81702f09ec6 --- /dev/null +++ b/arch/blackfin/include/mach-common/ports-b.h @@ -0,0 +1,25 @@ +/* + * Port B Masks + */ + +#ifndef __BFIN_PERIPHERAL_PORT_B__ +#define __BFIN_PERIPHERAL_PORT_B__ + +#define PB0 (1 << 0) +#define PB1 (1 << 1) +#define PB2 (1 << 2) +#define PB3 (1 << 3) +#define PB4 (1 << 4) +#define PB5 (1 << 5) +#define PB6 (1 << 6) +#define PB7 (1 << 7) +#define PB8 (1 << 8) +#define PB9 (1 << 9) +#define PB10 (1 << 10) +#define PB11 (1 << 11) +#define PB12 (1 << 12) +#define PB13 (1 << 13) +#define PB14 (1 << 14) +#define PB15 (1 << 15) + +#endif diff --git a/arch/blackfin/include/mach-common/ports-c.h b/arch/blackfin/include/mach-common/ports-c.h new file mode 100644 index 000000000000..3cc665e0ba08 --- /dev/null +++ b/arch/blackfin/include/mach-common/ports-c.h @@ -0,0 +1,25 @@ +/* + * Port C Masks + */ + +#ifndef __BFIN_PERIPHERAL_PORT_C__ +#define __BFIN_PERIPHERAL_PORT_C__ + +#define PC0 (1 << 0) +#define PC1 (1 << 1) +#define PC2 (1 << 2) +#define PC3 (1 << 3) +#define PC4 (1 << 4) +#define PC5 (1 << 5) +#define PC6 (1 << 6) +#define PC7 (1 << 7) +#define PC8 (1 << 8) +#define PC9 (1 << 9) +#define PC10 (1 << 10) +#define PC11 (1 << 11) +#define PC12 (1 << 12) +#define PC13 (1 << 13) +#define PC14 (1 << 14) +#define PC15 (1 << 15) + +#endif diff --git a/arch/blackfin/include/mach-common/ports-d.h b/arch/blackfin/include/mach-common/ports-d.h new file mode 100644 index 000000000000..868c6a01f1b2 --- /dev/null +++ b/arch/blackfin/include/mach-common/ports-d.h @@ -0,0 +1,25 @@ +/* + * Port D Masks + */ + +#ifndef __BFIN_PERIPHERAL_PORT_D__ +#define __BFIN_PERIPHERAL_PORT_D__ + +#define PD0 (1 << 0) +#define PD1 (1 << 1) +#define PD2 (1 << 2) +#define PD3 (1 << 3) +#define PD4 (1 << 4) +#define PD5 (1 << 5) +#define PD6 (1 << 6) +#define PD7 (1 << 7) +#define PD8 (1 << 8) +#define PD9 (1 << 9) +#define PD10 (1 << 10) +#define PD11 (1 << 11) +#define PD12 (1 << 12) +#define PD13 (1 << 13) +#define PD14 (1 << 14) +#define PD15 (1 << 15) + +#endif diff --git a/arch/blackfin/include/mach-common/ports-e.h b/arch/blackfin/include/mach-common/ports-e.h new file mode 100644 index 000000000000..c88b0d0dd443 --- /dev/null +++ b/arch/blackfin/include/mach-common/ports-e.h @@ -0,0 +1,25 @@ +/* + * Port E Masks + */ + +#ifndef __BFIN_PERIPHERAL_PORT_E__ +#define __BFIN_PERIPHERAL_PORT_E__ + +#define PE0 (1 << 0) +#define PE1 (1 << 1) +#define PE2 (1 << 2) +#define PE3 (1 << 3) +#define PE4 (1 << 4) +#define PE5 (1 << 5) +#define PE6 (1 << 6) +#define PE7 (1 << 7) +#define PE8 (1 << 8) +#define PE9 (1 << 9) +#define PE10 (1 << 10) +#define PE11 (1 << 11) +#define PE12 (1 << 12) +#define PE13 (1 << 13) +#define PE14 (1 << 14) +#define PE15 (1 << 15) + +#endif diff --git a/arch/blackfin/include/mach-common/ports-f.h b/arch/blackfin/include/mach-common/ports-f.h new file mode 100644 index 000000000000..d6af20633278 --- /dev/null +++ b/arch/blackfin/include/mach-common/ports-f.h @@ -0,0 +1,25 @@ +/* + * Port F Masks + */ + +#ifndef __BFIN_PERIPHERAL_PORT_F__ +#define __BFIN_PERIPHERAL_PORT_F__ + +#define PF0 (1 << 0) +#define PF1 (1 << 1) +#define PF2 (1 << 2) +#define PF3 (1 << 3) +#define PF4 (1 << 4) +#define PF5 (1 << 5) +#define PF6 (1 << 6) +#define PF7 (1 << 7) +#define PF8 (1 << 8) +#define PF9 (1 << 9) +#define PF10 (1 << 10) +#define PF11 (1 << 11) +#define PF12 (1 << 12) +#define PF13 (1 << 13) +#define PF14 (1 << 14) +#define PF15 (1 << 15) + +#endif diff --git a/arch/blackfin/include/mach-common/ports-g.h b/arch/blackfin/include/mach-common/ports-g.h new file mode 100644 index 000000000000..09355d333c0e --- /dev/null +++ b/arch/blackfin/include/mach-common/ports-g.h @@ -0,0 +1,25 @@ +/* + * Port G Masks + */ + +#ifndef __BFIN_PERIPHERAL_PORT_G__ +#define __BFIN_PERIPHERAL_PORT_G__ + +#define PG0 (1 << 0) +#define PG1 (1 << 1) +#define PG2 (1 << 2) +#define PG3 (1 << 3) +#define PG4 (1 << 4) +#define PG5 (1 << 5) +#define PG6 (1 << 6) +#define PG7 (1 << 7) +#define PG8 (1 << 8) +#define PG9 (1 << 9) +#define PG10 (1 << 10) +#define PG11 (1 << 11) +#define PG12 (1 << 12) +#define PG13 (1 << 13) +#define PG14 (1 << 14) +#define PG15 (1 << 15) + +#endif diff --git a/arch/blackfin/include/mach-common/ports-h.h b/arch/blackfin/include/mach-common/ports-h.h new file mode 100644 index 000000000000..fa3910c6fbd4 --- /dev/null +++ b/arch/blackfin/include/mach-common/ports-h.h @@ -0,0 +1,25 @@ +/* + * Port H Masks + */ + +#ifndef __BFIN_PERIPHERAL_PORT_H__ +#define __BFIN_PERIPHERAL_PORT_H__ + +#define PH0 (1 << 0) +#define PH1 (1 << 1) +#define PH2 (1 << 2) +#define PH3 (1 << 3) +#define PH4 (1 << 4) +#define PH5 (1 << 5) +#define PH6 (1 << 6) +#define PH7 (1 << 7) +#define PH8 (1 << 8) +#define PH9 (1 << 9) +#define PH10 (1 << 10) +#define PH11 (1 << 11) +#define PH12 (1 << 12) +#define PH13 (1 << 13) +#define PH14 (1 << 14) +#define PH15 (1 << 15) + +#endif diff --git a/arch/blackfin/include/mach-common/ports-i.h b/arch/blackfin/include/mach-common/ports-i.h new file mode 100644 index 000000000000..f176f08af624 --- /dev/null +++ b/arch/blackfin/include/mach-common/ports-i.h @@ -0,0 +1,25 @@ +/* + * Port I Masks + */ + +#ifndef __BFIN_PERIPHERAL_PORT_I__ +#define __BFIN_PERIPHERAL_PORT_I__ + +#define PI0 (1 << 0) +#define PI1 (1 << 1) +#define PI2 (1 << 2) +#define PI3 (1 << 3) +#define PI4 (1 << 4) +#define PI5 (1 << 5) +#define PI6 (1 << 6) +#define PI7 (1 << 7) +#define PI8 (1 << 8) +#define PI9 (1 << 9) +#define PI10 (1 << 10) +#define PI11 (1 << 11) +#define PI12 (1 << 12) +#define PI13 (1 << 13) +#define PI14 (1 << 14) +#define PI15 (1 << 15) + +#endif diff --git a/arch/blackfin/include/mach-common/ports-j.h b/arch/blackfin/include/mach-common/ports-j.h new file mode 100644 index 000000000000..924123ecec5a --- /dev/null +++ b/arch/blackfin/include/mach-common/ports-j.h @@ -0,0 +1,25 @@ +/* + * Port J Masks + */ + +#ifndef __BFIN_PERIPHERAL_PORT_J__ +#define __BFIN_PERIPHERAL_PORT_J__ + +#define PJ0 (1 << 0) +#define PJ1 (1 << 1) +#define PJ2 (1 << 2) +#define PJ3 (1 << 3) +#define PJ4 (1 << 4) +#define PJ5 (1 << 5) +#define PJ6 (1 << 6) +#define PJ7 (1 << 7) +#define PJ8 (1 << 8) +#define PJ9 (1 << 9) +#define PJ10 (1 << 10) +#define PJ11 (1 << 11) +#define PJ12 (1 << 12) +#define PJ13 (1 << 13) +#define PJ14 (1 << 14) +#define PJ15 (1 << 15) + +#endif |