diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/blackfin/kernel/bfin_gpio.c | 1208 |
1 files changed, 0 insertions, 1208 deletions
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c deleted file mode 100644 index 63da80bbadf6..000000000000 --- a/arch/blackfin/kernel/bfin_gpio.c +++ /dev/null @@ -1,1208 +0,0 @@ -/* - * GPIO Abstraction Layer - * - * Copyright 2006-2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later - */ - -#include <linux/delay.h> -#include <linux/module.h> -#include <linux/err.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/gpio/driver.h> -/* FIXME: consumer API required for gpio_set_value() etc, get rid of this */ -#include <linux/gpio.h> -#include <linux/irq.h> -#include <asm/gpio.h> -#include <asm/irq_handler.h> -#include <asm/portmux.h> - -#if ANOMALY_05000311 || ANOMALY_05000323 -enum { - AWA_data = SYSCR, - AWA_data_clear = SYSCR, - AWA_data_set = SYSCR, - AWA_toggle = SYSCR, - AWA_maska = BFIN_UART_SCR, - AWA_maska_clear = BFIN_UART_SCR, - AWA_maska_set = BFIN_UART_SCR, - AWA_maska_toggle = BFIN_UART_SCR, - AWA_maskb = BFIN_UART_GCTL, - AWA_maskb_clear = BFIN_UART_GCTL, - AWA_maskb_set = BFIN_UART_GCTL, - AWA_maskb_toggle = BFIN_UART_GCTL, - AWA_dir = SPORT1_STAT, - AWA_polar = SPORT1_STAT, - AWA_edge = SPORT1_STAT, - AWA_both = SPORT1_STAT, -#if ANOMALY_05000311 - AWA_inen = TIMER_ENABLE, -#elif ANOMALY_05000323 - AWA_inen = DMA1_1_CONFIG, -#endif -}; - /* Anomaly Workaround */ -#define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name) -#else -#define AWA_DUMMY_READ(...) do { } while (0) -#endif - -static struct gpio_port_t * const gpio_array[] = { -#if defined(BF533_FAMILY) || defined(BF538_FAMILY) - (struct gpio_port_t *) FIO_FLAG_D, -#elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) - (struct gpio_port_t *) PORTFIO, - (struct gpio_port_t *) PORTGIO, - (struct gpio_port_t *) PORTHIO, -#elif defined(BF561_FAMILY) - (struct gpio_port_t *) FIO0_FLAG_D, - (struct gpio_port_t *) FIO1_FLAG_D, - (struct gpio_port_t *) FIO2_FLAG_D, -#else -# error no gpio arrays defined -#endif -}; - -#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) -static unsigned short * const port_fer[] = { - (unsigned short *) PORTF_FER, - (unsigned short *) PORTG_FER, - (unsigned short *) PORTH_FER, -}; - -# if !defined(BF537_FAMILY) -static unsigned short * const port_mux[] = { - (unsigned short *) PORTF_MUX, - (unsigned short *) PORTG_MUX, - (unsigned short *) PORTH_MUX, -}; - -static const -u8 pmux_offset[][16] = { -# if defined(CONFIG_BF52x) - { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */ - { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */ - { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */ -# elif defined(CONFIG_BF51x) - { 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */ - { 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */ - { 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */ -# endif -}; -# endif - -#elif defined(BF538_FAMILY) -static unsigned short * const port_fer[] = { - (unsigned short *) PORTCIO_FER, - (unsigned short *) PORTDIO_FER, - (unsigned short *) PORTEIO_FER, -}; -#endif - -#define RESOURCE_LABEL_SIZE 16 - -static struct str_ident { - char name[RESOURCE_LABEL_SIZE]; -} str_ident[MAX_RESOURCES]; - -#if defined(CONFIG_PM) -static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; -# ifdef BF538_FAMILY -static unsigned short port_fer_saved[3]; -# endif -#endif - -static void gpio_error(unsigned gpio) -{ - printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio); -} - -static void set_label(unsigned short ident, const char *label) -{ - if (label) { - strncpy(str_ident[ident].name, label, - RESOURCE_LABEL_SIZE); - str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0; - } -} - -static char *get_label(unsigned short ident) -{ - return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN"); -} - -static int cmp_label(unsigned short ident, const char *label) -{ - if (label == NULL) { - dump_stack(); - printk(KERN_ERR "Please provide none-null label\n"); - } - - if (label) - return strcmp(str_ident[ident].name, label); - else - return -EINVAL; -} - -#define map_entry(m, i) reserved_##m##_map[gpio_bank(i)] -#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i)) -#define reserve(m, i) (map_entry(m, i) |= gpio_bit(i)) -#define unreserve(m, i) (map_entry(m, i) &= ~gpio_bit(i)) -#define DECLARE_RESERVED_MAP(m, c) static unsigned short reserved_##m##_map[c] - -DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM); -DECLARE_RESERVED_MAP(peri, DIV_ROUND_UP(MAX_RESOURCES, GPIO_BANKSIZE)); -DECLARE_RESERVED_MAP(gpio_irq, GPIO_BANK_NUM); - -inline int check_gpio(unsigned gpio) -{ - if (gpio >= MAX_BLACKFIN_GPIOS) - return -EINVAL; - return 0; -} - -static void port_setup(unsigned gpio, unsigned short usage) -{ -#if defined(BF538_FAMILY) - /* - * BF538/9 Port C,D and E are special. - * Inverted PORT_FER polarity on CDE and no PORF_FER on F - * Regular PORT F GPIOs are handled here, CDE are exclusively - * managed by GPIOLIB - */ - - if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES) - return; - - gpio -= MAX_BLACKFIN_GPIOS; - - if (usage == GPIO_USAGE) - *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); - else - *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); - SSYNC(); - return; -#endif - - if (check_gpio(gpio)) - return; - -#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) - if (usage == GPIO_USAGE) - *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); - else - *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); - SSYNC(); -#endif -} - -#ifdef BF537_FAMILY -static const s8 port_mux[] = { - [GPIO_PF0] = 3, - [GPIO_PF1] = 3, - [GPIO_PF2] = 4, - [GPIO_PF3] = 4, - [GPIO_PF4] = 5, - [GPIO_PF5] = 6, - [GPIO_PF6] = 7, - [GPIO_PF7] = 8, - [GPIO_PF8 ... GPIO_PF15] = -1, - [GPIO_PG0 ... GPIO_PG7] = -1, - [GPIO_PG8] = 9, - [GPIO_PG9] = 9, - [GPIO_PG10] = 10, - [GPIO_PG11] = 10, - [GPIO_PG12] = 10, - [GPIO_PG13] = 11, - [GPIO_PG14] = 11, - [GPIO_PG15] = 11, - [GPIO_PH0 ... GPIO_PH15] = -1, - [PORT_PJ0 ... PORT_PJ3] = -1, - [PORT_PJ4] = 1, - [PORT_PJ5] = 1, - [PORT_PJ6 ... PORT_PJ9] = -1, - [PORT_PJ10] = 0, - [PORT_PJ11] = 0, -}; - -static int portmux_group_check(unsigned short per) -{ - u16 ident = P_IDENT(per); - u16 function = P_FUNCT2MUX(per); - s8 offset = port_mux[ident]; - u16 m, pmux, pfunc, mask; - - if (offset < 0) - return 0; - - pmux = bfin_read_PORT_MUX(); - for (m = 0; m < ARRAY_SIZE(port_mux); ++m) { - if (m == ident) - continue; - if (port_mux[m] != offset) - continue; - if (!is_reserved(peri, m, 1)) - continue; - - if (offset == 1) - mask = 3; - else - mask = 1; - - pfunc = (pmux >> offset) & mask; - if (pfunc != (function & mask)) { - pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n", - ident, function, m, pfunc); - return -EINVAL; - } - } - - return 0; -} - -static void portmux_setup(unsigned short per) -{ - u16 ident = P_IDENT(per); - u16 function = P_FUNCT2MUX(per); - s8 offset = port_mux[ident]; - u16 pmux, mask; - - if (offset == -1) - return; - - pmux = bfin_read_PORT_MUX(); - if (offset == 1) - mask = 3; - else - mask = 1; - - pmux &= ~(mask << offset); - pmux |= ((function & mask) << offset); - - bfin_write_PORT_MUX(pmux); -} -#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) -static int portmux_group_check(unsigned short per) -{ - u16 ident = P_IDENT(per); - u16 function = P_FUNCT2MUX(per); - u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)]; - u16 pin, gpiopin, pfunc; - - for (pin = 0; pin < GPIO_BANKSIZE; ++pin) { - if (offset != pmux_offset[gpio_bank(ident)][pin]) - continue; - - gpiopin = gpio_bank(ident) * GPIO_BANKSIZE + pin; - if (gpiopin == ident) - continue; - if (!is_reserved(peri, gpiopin, 1)) - continue; - - pfunc = *port_mux[gpio_bank(ident)]; - pfunc = (pfunc >> offset) & 3; - if (pfunc != function) { - pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n", - ident, function, gpiopin, pfunc); - return -EINVAL; - } - } - - return 0; -} - -inline void portmux_setup(unsigned short per) -{ - u16 ident = P_IDENT(per); - u16 function = P_FUNCT2MUX(per); - u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)]; - u16 pmux; - - pmux = *port_mux[gpio_bank(ident)]; - if (((pmux >> offset) & 3) == function) - return; - pmux &= ~(3 << offset); - pmux |= (function & 3) << offset; - *port_mux[gpio_bank(ident)] = pmux; - SSYNC(); -} -#else -# define portmux_setup(...) do { } while (0) -static int portmux_group_check(unsigned short per) -{ - return 0; -} -#endif - -/*********************************************************** -* -* FUNCTIONS: Blackfin General Purpose Ports Access Functions -* -* INPUTS/OUTPUTS: -* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS -* -* -* DESCRIPTION: These functions abstract direct register access -* to Blackfin processor General Purpose -* Ports Regsiters -* -* CAUTION: These functions do not belong to the GPIO Driver API -************************************************************* -* MODIFICATION HISTORY : -**************************************************************/ - -/* Set a specific bit */ - -#define SET_GPIO(name) \ -void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ -{ \ - unsigned long flags; \ - flags = hard_local_irq_save(); \ - if (arg) \ - gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ - else \ - gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ - AWA_DUMMY_READ(name); \ - hard_local_irq_restore(flags); \ -} \ -EXPORT_SYMBOL(set_gpio_ ## name); - -SET_GPIO(dir) /* set_gpio_dir() */ -SET_GPIO(inen) /* set_gpio_inen() */ -SET_GPIO(polar) /* set_gpio_polar() */ -SET_GPIO(edge) /* set_gpio_edge() */ -SET_GPIO(both) /* set_gpio_both() */ - - -#define SET_GPIO_SC(name) \ -void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ -{ \ - unsigned long flags; \ - if (ANOMALY_05000311 || ANOMALY_05000323) \ - flags = hard_local_irq_save(); \ - if (arg) \ - gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ - else \ - gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ - if (ANOMALY_05000311 || ANOMALY_05000323) { \ - AWA_DUMMY_READ(name); \ - hard_local_irq_restore(flags); \ - } \ -} \ -EXPORT_SYMBOL(set_gpio_ ## name); - -SET_GPIO_SC(maska) -SET_GPIO_SC(maskb) -SET_GPIO_SC(data) - -void set_gpio_toggle(unsigned gpio) -{ - unsigned long flags; - if (ANOMALY_05000311 || ANOMALY_05000323) - flags = hard_local_irq_save(); - gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio); - if (ANOMALY_05000311 || ANOMALY_05000323) { - AWA_DUMMY_READ(toggle); - hard_local_irq_restore(flags); - } -} -EXPORT_SYMBOL(set_gpio_toggle); - - -/*Set current PORT date (16-bit word)*/ - -#define SET_GPIO_P(name) \ -void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ -{ \ - unsigned long flags; \ - if (ANOMALY_05000311 || ANOMALY_05000323) \ - flags = hard_local_irq_save(); \ - gpio_array[gpio_bank(gpio)]->name = arg; \ - if (ANOMALY_05000311 || ANOMALY_05000323) { \ - AWA_DUMMY_READ(name); \ - hard_local_irq_restore(flags); \ - } \ -} \ -EXPORT_SYMBOL(set_gpiop_ ## name); - -SET_GPIO_P(data) -SET_GPIO_P(dir) -SET_GPIO_P(inen) -SET_GPIO_P(polar) -SET_GPIO_P(edge) -SET_GPIO_P(both) -SET_GPIO_P(maska) -SET_GPIO_P(maskb) - -/* Get a specific bit */ -#define GET_GPIO(name) \ -unsigned short get_gpio_ ## name(unsigned gpio) \ -{ \ - unsigned long flags; \ - unsigned short ret; \ - if (ANOMALY_05000311 || ANOMALY_05000323) \ - flags = hard_local_irq_save(); \ - ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ - if (ANOMALY_05000311 || ANOMALY_05000323) { \ - AWA_DUMMY_READ(name); \ - hard_local_irq_restore(flags); \ - } \ - return ret; \ -} \ -EXPORT_SYMBOL(get_gpio_ ## name); - -GET_GPIO(data) -GET_GPIO(dir) -GET_GPIO(inen) -GET_GPIO(polar) -GET_GPIO(edge) -GET_GPIO(both) -GET_GPIO(maska) -GET_GPIO(maskb) - -/*Get current PORT date (16-bit word)*/ - -#define GET_GPIO_P(name) \ -unsigned short get_gpiop_ ## name(unsigned gpio) \ -{ \ - unsigned long flags; \ - unsigned short ret; \ - if (ANOMALY_05000311 || ANOMALY_05000323) \ - flags = hard_local_irq_save(); \ - ret = (gpio_array[gpio_bank(gpio)]->name); \ - if (ANOMALY_05000311 || ANOMALY_05000323) { \ - AWA_DUMMY_READ(name); \ - hard_local_irq_restore(flags); \ - } \ - return ret; \ -} \ -EXPORT_SYMBOL(get_gpiop_ ## name); - -GET_GPIO_P(data) -GET_GPIO_P(dir) -GET_GPIO_P(inen) -GET_GPIO_P(polar) -GET_GPIO_P(edge) -GET_GPIO_P(both) -GET_GPIO_P(maska) -GET_GPIO_P(maskb) - - -#ifdef CONFIG_PM -DECLARE_RESERVED_MAP(wakeup, GPIO_BANK_NUM); - -static const unsigned int sic_iwr_irqs[] = { -#if defined(BF533_FAMILY) - IRQ_PROG_INTB -#elif defined(BF537_FAMILY) - IRQ_PF_INTB_WATCH, IRQ_PORTG_INTB, IRQ_PH_INTB_MAC_TX -#elif defined(BF538_FAMILY) - IRQ_PORTF_INTB -#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) - IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB -#elif defined(BF561_FAMILY) - IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB -#else -# error no SIC_IWR defined -#endif -}; - -/*********************************************************** -* -* FUNCTIONS: Blackfin PM Setup API -* -* INPUTS/OUTPUTS: -* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS -* type - -* PM_WAKE_RISING -* PM_WAKE_FALLING -* PM_WAKE_HIGH -* PM_WAKE_LOW -* PM_WAKE_BOTH_EDGES -* -* DESCRIPTION: Blackfin PM Driver API -* -* CAUTION: -************************************************************* -* MODIFICATION HISTORY : -**************************************************************/ -int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) -{ - unsigned long flags; - - if (check_gpio(gpio) < 0) - return -EINVAL; - - flags = hard_local_irq_save(); - if (ctrl) - reserve(wakeup, gpio); - else - unreserve(wakeup, gpio); - - set_gpio_maskb(gpio, ctrl); - hard_local_irq_restore(flags); - - return 0; -} - -int bfin_gpio_pm_standby_ctrl(unsigned ctrl) -{ - u16 bank, mask, i; - - for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - mask = map_entry(wakeup, i); - bank = gpio_bank(i); - - if (mask) - bfin_internal_set_wake(sic_iwr_irqs[bank], ctrl); - } - return 0; -} - -void bfin_gpio_pm_hibernate_suspend(void) -{ - int i, bank; - -#ifdef BF538_FAMILY - for (i = 0; i < ARRAY_SIZE(port_fer_saved); ++i) - port_fer_saved[i] = *port_fer[i]; -#endif - - for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); - -#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) - gpio_bank_saved[bank].fer = *port_fer[bank]; -#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) - gpio_bank_saved[bank].mux = *port_mux[bank]; -#else - if (bank == 0) - gpio_bank_saved[bank].mux = bfin_read_PORT_MUX(); -#endif -#endif - gpio_bank_saved[bank].data = gpio_array[bank]->data; - gpio_bank_saved[bank].inen = gpio_array[bank]->inen; - gpio_bank_saved[bank].polar = gpio_array[bank]->polar; - gpio_bank_saved[bank].dir = gpio_array[bank]->dir; - gpio_bank_saved[bank].edge = gpio_array[bank]->edge; - gpio_bank_saved[bank].both = gpio_array[bank]->both; - gpio_bank_saved[bank].maska = gpio_array[bank]->maska; - } - -#ifdef BFIN_SPECIAL_GPIO_BANKS - bfin_special_gpio_pm_hibernate_suspend(); -#endif - - AWA_DUMMY_READ(maska); -} - -void bfin_gpio_pm_hibernate_restore(void) -{ - int i, bank; - -#ifdef BF538_FAMILY - for (i = 0; i < ARRAY_SIZE(port_fer_saved); ++i) - *port_fer[i] = port_fer_saved[i]; -#endif - - for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); - -#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) -#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) - *port_mux[bank] = gpio_bank_saved[bank].mux; -#else - if (bank == 0) - bfin_write_PORT_MUX(gpio_bank_saved[bank].mux); -#endif - *port_fer[bank] = gpio_bank_saved[bank].fer; -#endif - gpio_array[bank]->inen = gpio_bank_saved[bank].inen; - gpio_array[bank]->data_set = gpio_bank_saved[bank].data - & gpio_bank_saved[bank].dir; - gpio_array[bank]->dir = gpio_bank_saved[bank].dir; - gpio_array[bank]->polar = gpio_bank_saved[bank].polar; - gpio_array[bank]->edge = gpio_bank_saved[bank].edge; - gpio_array[bank]->both = gpio_bank_saved[bank].both; - gpio_array[bank]->maska = gpio_bank_saved[bank].maska; - } - -#ifdef BFIN_SPECIAL_GPIO_BANKS - bfin_special_gpio_pm_hibernate_restore(); -#endif - - AWA_DUMMY_READ(maska); -} - - -#endif - -/*********************************************************** -* -* FUNCTIONS: Blackfin Peripheral Resource Allocation -* and PortMux Setup -* -* INPUTS/OUTPUTS: -* per Peripheral Identifier -* label String -* -* DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API -* -* CAUTION: -************************************************************* -* MODIFICATION HISTORY : -**************************************************************/ - -int peripheral_request(unsigned short per, const char *label) -{ - unsigned long flags; - unsigned short ident = P_IDENT(per); - - /* - * Don't cares are pins with only one dedicated function - */ - - if (per & P_DONTCARE) - return 0; - - if (!(per & P_DEFINED)) - return -ENODEV; - - BUG_ON(ident >= MAX_RESOURCES); - - flags = hard_local_irq_save(); - - /* If a pin can be muxed as either GPIO or peripheral, make - * sure it is not already a GPIO pin when we request it. - */ - if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) { - if (system_state == SYSTEM_BOOTING) - dump_stack(); - printk(KERN_ERR - "%s: Peripheral %d is already reserved as GPIO by %s !\n", - __func__, ident, get_label(ident)); - hard_local_irq_restore(flags); - return -EBUSY; - } - - if (unlikely(is_reserved(peri, ident, 1))) { - - /* - * Pin functions like AMC address strobes my - * be requested and used by several drivers - */ - - if (!(per & P_MAYSHARE)) { - /* - * Allow that the identical pin function can - * be requested from the same driver twice - */ - - if (cmp_label(ident, label) == 0) - goto anyway; - - if (system_state == SYSTEM_BOOTING) - dump_stack(); - printk(KERN_ERR - "%s: Peripheral %d function %d is already reserved by %s !\n", - __func__, ident, P_FUNCT2MUX(per), get_label(ident)); - hard_local_irq_restore(flags); - return -EBUSY; - } - } - - if (unlikely(portmux_group_check(per))) { - hard_local_irq_restore(flags); - return -EBUSY; - } - anyway: - reserve(peri, ident); - - portmux_setup(per); - port_setup(ident, PERIPHERAL_USAGE); - - hard_local_irq_restore(flags); - set_label(ident, label); - - return 0; -} -EXPORT_SYMBOL(peripheral_request); - -int peripheral_request_list(const unsigned short per[], const char *label) -{ - u16 cnt; - int ret; - - for (cnt = 0; per[cnt] != 0; cnt++) { - - ret = peripheral_request(per[cnt], label); - - if (ret < 0) { - for ( ; cnt > 0; cnt--) - peripheral_free(per[cnt - 1]); - - return ret; - } - } - - return 0; -} -EXPORT_SYMBOL(peripheral_request_list); - -void peripheral_free(unsigned short per) -{ - unsigned long flags; - unsigned short ident = P_IDENT(per); - - if (per & P_DONTCARE) - return; - - if (!(per & P_DEFINED)) - return; - - flags = hard_local_irq_save(); - - if (unlikely(!is_reserved(peri, ident, 0))) { - hard_local_irq_restore(flags); - return; - } - - if (!(per & P_MAYSHARE)) - port_setup(ident, GPIO_USAGE); - - unreserve(peri, ident); - - set_label(ident, "free"); - - hard_local_irq_restore(flags); -} -EXPORT_SYMBOL(peripheral_free); - -void peripheral_free_list(const unsigned short per[]) -{ - u16 cnt; - for (cnt = 0; per[cnt] != 0; cnt++) - peripheral_free(per[cnt]); -} -EXPORT_SYMBOL(peripheral_free_list); - -/*********************************************************** -* -* FUNCTIONS: Blackfin GPIO Driver -* -* INPUTS/OUTPUTS: -* gpio PIO Number between 0 and MAX_BLACKFIN_GPIOS -* label String -* -* DESCRIPTION: Blackfin GPIO Driver API -* -* CAUTION: -************************************************************* -* MODIFICATION HISTORY : -**************************************************************/ - -int bfin_gpio_request(unsigned gpio, const char *label) -{ - unsigned long flags; - - if (check_gpio(gpio) < 0) - return -EINVAL; - - flags = hard_local_irq_save(); - - /* - * Allow that the identical GPIO can - * be requested from the same driver twice - * Do nothing and return - - */ - - if (cmp_label(gpio, label) == 0) { - hard_local_irq_restore(flags); - return 0; - } - - if (unlikely(is_reserved(gpio, gpio, 1))) { - if (system_state == SYSTEM_BOOTING) - dump_stack(); - printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", - gpio, get_label(gpio)); - hard_local_irq_restore(flags); - return -EBUSY; - } - if (unlikely(is_reserved(peri, gpio, 1))) { - if (system_state == SYSTEM_BOOTING) - dump_stack(); - printk(KERN_ERR - "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", - gpio, get_label(gpio)); - hard_local_irq_restore(flags); - return -EBUSY; - } - if (unlikely(is_reserved(gpio_irq, gpio, 1))) { - printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" - " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); - } else { /* Reset POLAR setting when acquiring a gpio for the first time */ - set_gpio_polar(gpio, 0); - } - - reserve(gpio, gpio); - set_label(gpio, label); - - hard_local_irq_restore(flags); - - port_setup(gpio, GPIO_USAGE); - - return 0; -} -EXPORT_SYMBOL(bfin_gpio_request); - -void bfin_gpio_free(unsigned gpio) -{ - unsigned long flags; - - if (check_gpio(gpio) < 0) - return; - - might_sleep(); - - flags = hard_local_irq_save(); - - if (unlikely(!is_reserved(gpio, gpio, 0))) { - if (system_state == SYSTEM_BOOTING) - dump_stack(); - gpio_error(gpio); - hard_local_irq_restore(flags); - return; - } - - unreserve(gpio, gpio); - - set_label(gpio, "free"); - - hard_local_irq_restore(flags); -} -EXPORT_SYMBOL(bfin_gpio_free); - -#ifdef BFIN_SPECIAL_GPIO_BANKS -DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES)); - -int bfin_special_gpio_request(unsigned gpio, const char *label) -{ - unsigned long flags; - - flags = hard_local_irq_save(); - - /* - * Allow that the identical GPIO can - * be requested from the same driver twice - * Do nothing and return - - */ - - if (cmp_label(gpio, label) == 0) { - hard_local_irq_restore(flags); - return 0; - } - - if (unlikely(is_reserved(special_gpio, gpio, 1))) { - hard_local_irq_restore(flags); - printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", - gpio, get_label(gpio)); - - return -EBUSY; - } - if (unlikely(is_reserved(peri, gpio, 1))) { - hard_local_irq_restore(flags); - printk(KERN_ERR - "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", - gpio, get_label(gpio)); - - return -EBUSY; - } - - reserve(special_gpio, gpio); - reserve(peri, gpio); - - set_label(gpio, label); - hard_local_irq_restore(flags); - port_setup(gpio, GPIO_USAGE); - - return 0; -} -EXPORT_SYMBOL(bfin_special_gpio_request); - -void bfin_special_gpio_free(unsigned gpio) -{ - unsigned long flags; - - might_sleep(); - - flags = hard_local_irq_save(); - - if (unlikely(!is_reserved(special_gpio, gpio, 0))) { - gpio_error(gpio); - hard_local_irq_restore(flags); - return; - } - - unreserve(special_gpio, gpio); - unreserve(peri, gpio); - set_label(gpio, "free"); - hard_local_irq_restore(flags); -} -EXPORT_SYMBOL(bfin_special_gpio_free); -#endif - - -int bfin_gpio_irq_request(unsigned gpio, const char *label) -{ - unsigned long flags; - - if (check_gpio(gpio) < 0) - return -EINVAL; - - flags = hard_local_irq_save(); - - if (unlikely(is_reserved(peri, gpio, 1))) { - if (system_state == SYSTEM_BOOTING) - dump_stack(); - printk(KERN_ERR - "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", - gpio, get_label(gpio)); - hard_local_irq_restore(flags); - return -EBUSY; - } - if (unlikely(is_reserved(gpio, gpio, 1))) - printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved by %s! " - "(Documentation/blackfin/bfin-gpio-notes.txt)\n", - gpio, get_label(gpio)); - - reserve(gpio_irq, gpio); - set_label(gpio, label); - - hard_local_irq_restore(flags); - - port_setup(gpio, GPIO_USAGE); - - return 0; -} - -void bfin_gpio_irq_free(unsigned gpio) -{ - unsigned long flags; - - if (check_gpio(gpio) < 0) - return; - - flags = hard_local_irq_save(); - - if (unlikely(!is_reserved(gpio_irq, gpio, 0))) { - if (system_state == SYSTEM_BOOTING) - dump_stack(); - gpio_error(gpio); - hard_local_irq_restore(flags); - return; - } - - unreserve(gpio_irq, gpio); - - set_label(gpio, "free"); - - hard_local_irq_restore(flags); -} - -static inline void __bfin_gpio_direction_input(unsigned gpio) -{ - gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); - gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); -} - -int bfin_gpio_direction_input(unsigned gpio) -{ - unsigned long flags; - - if (unlikely(!is_reserved(gpio, gpio, 0))) { - gpio_error(gpio); - return -EINVAL; - } - - flags = hard_local_irq_save(); - __bfin_gpio_direction_input(gpio); - AWA_DUMMY_READ(inen); - hard_local_irq_restore(flags); - - return 0; -} -EXPORT_SYMBOL(bfin_gpio_direction_input); - -void bfin_gpio_irq_prepare(unsigned gpio) -{ - port_setup(gpio, GPIO_USAGE); -} - -void bfin_gpio_set_value(unsigned gpio, int arg) -{ - if (arg) - gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); - else - gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); -} -EXPORT_SYMBOL(bfin_gpio_set_value); - -int bfin_gpio_direction_output(unsigned gpio, int value) -{ - unsigned long flags; - - if (unlikely(!is_reserved(gpio, gpio, 0))) { - gpio_error(gpio); - return -EINVAL; - } - - flags = hard_local_irq_save(); - - gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); - gpio_set_value(gpio, value); - gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); - - AWA_DUMMY_READ(dir); - hard_local_irq_restore(flags); - - return 0; -} -EXPORT_SYMBOL(bfin_gpio_direction_output); - -int bfin_gpio_get_value(unsigned gpio) -{ - unsigned long flags; - - if (unlikely(get_gpio_edge(gpio))) { - int ret; - flags = hard_local_irq_save(); - set_gpio_edge(gpio, 0); - ret = get_gpio_data(gpio); - set_gpio_edge(gpio, 1); - hard_local_irq_restore(flags); - return ret; - } else - return get_gpio_data(gpio); -} -EXPORT_SYMBOL(bfin_gpio_get_value); - -/* If we are booting from SPI and our board lacks a strong enough pull up, - * the core can reset and execute the bootrom faster than the resistor can - * pull the signal logically high. To work around this (common) error in - * board design, we explicitly set the pin back to GPIO mode, force /CS - * high, and wait for the electrons to do their thing. - * - * This function only makes sense to be called from reset code, but it - * lives here as we need to force all the GPIO states w/out going through - * BUG() checks and such. - */ -void bfin_reset_boot_spi_cs(unsigned short pin) -{ - unsigned short gpio = P_IDENT(pin); - port_setup(gpio, GPIO_USAGE); - gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); - AWA_DUMMY_READ(data_set); - udelay(1); -} - -#if defined(CONFIG_PROC_FS) -static int gpio_proc_show(struct seq_file *m, void *v) -{ - int c, irq, gpio; - - for (c = 0; c < MAX_RESOURCES; c++) { - irq = is_reserved(gpio_irq, c, 1); - gpio = is_reserved(gpio, c, 1); - if (!check_gpio(c) && (gpio || irq)) - seq_printf(m, "GPIO_%d: \t%s%s \t\tGPIO %s\n", c, - get_label(c), (gpio && irq) ? " *" : "", - get_gpio_dir(c) ? "OUTPUT" : "INPUT"); - else if (is_reserved(peri, c, 1)) - seq_printf(m, "GPIO_%d: \t%s \t\tPeripheral\n", c, get_label(c)); - else - continue; - } - - return 0; -} - -static int gpio_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, gpio_proc_show, NULL); -} - -static const struct file_operations gpio_proc_ops = { - .open = gpio_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static __init int gpio_register_proc(void) -{ - struct proc_dir_entry *proc_gpio; - - proc_gpio = proc_create("gpio", 0, NULL, &gpio_proc_ops); - return proc_gpio == NULL; -} -__initcall(gpio_register_proc); -#endif - -#ifdef CONFIG_GPIOLIB -static int bfin_gpiolib_direction_input(struct gpio_chip *chip, unsigned gpio) -{ - return bfin_gpio_direction_input(gpio); -} - -static int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio, int level) -{ - return bfin_gpio_direction_output(gpio, level); -} - -static int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio) -{ - return !!bfin_gpio_get_value(gpio); -} - -static void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value) -{ - return bfin_gpio_set_value(gpio, value); -} - -static int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio) -{ - return bfin_gpio_request(gpio, chip->label); -} - -static void bfin_gpiolib_gpio_free(struct gpio_chip *chip, unsigned gpio) -{ - return bfin_gpio_free(gpio); -} - -static int bfin_gpiolib_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -{ - return gpio + GPIO_IRQ_BASE; -} - -static struct gpio_chip bfin_chip = { - .label = "BFIN-GPIO", - .direction_input = bfin_gpiolib_direction_input, - .get = bfin_gpiolib_get_value, - .direction_output = bfin_gpiolib_direction_output, - .set = bfin_gpiolib_set_value, - .request = bfin_gpiolib_gpio_request, - .free = bfin_gpiolib_gpio_free, - .to_irq = bfin_gpiolib_gpio_to_irq, - .base = 0, - .ngpio = MAX_BLACKFIN_GPIOS, -}; - -static int __init bfin_gpiolib_setup(void) -{ - return gpiochip_add_data(&bfin_chip, NULL); -} -arch_initcall(bfin_gpiolib_setup); -#endif |