diff options
Diffstat (limited to 'arch/blackfin/kernel/trace.c')
| -rw-r--r-- | arch/blackfin/kernel/trace.c | 981 | 
1 files changed, 981 insertions, 0 deletions
| diff --git a/arch/blackfin/kernel/trace.c b/arch/blackfin/kernel/trace.c new file mode 100644 index 000000000000..59fcdf6b0138 --- /dev/null +++ b/arch/blackfin/kernel/trace.c @@ -0,0 +1,981 @@ +/* provide some functions which dump the trace buffer, in a nice way for people + * to read it, and understand what is going on + * + * Copyright 2004-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#include <linux/kernel.h> +#include <linux/hardirq.h> +#include <linux/thread_info.h> +#include <linux/mm.h> +#include <linux/uaccess.h> +#include <linux/module.h> +#include <linux/kallsyms.h> +#include <linux/err.h> +#include <linux/fs.h> +#include <asm/dma.h> +#include <asm/trace.h> +#include <asm/fixed_code.h> +#include <asm/traps.h> +#include <asm/irq_handler.h> + +void decode_address(char *buf, unsigned long address) +{ +	struct task_struct *p; +	struct mm_struct *mm; +	unsigned long flags, offset; +	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); +	struct rb_node *n; + +#ifdef CONFIG_KALLSYMS +	unsigned long symsize; +	const char *symname; +	char *modname; +	char *delim = ":"; +	char namebuf[128]; +#endif + +	buf += sprintf(buf, "<0x%08lx> ", address); + +#ifdef CONFIG_KALLSYMS +	/* look up the address and see if we are in kernel space */ +	symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf); + +	if (symname) { +		/* yeah! kernel space! */ +		if (!modname) +			modname = delim = ""; +		sprintf(buf, "{ %s%s%s%s + 0x%lx }", +			delim, modname, delim, symname, +			(unsigned long)offset); +		return; +	} +#endif + +	if (address >= FIXED_CODE_START && address < FIXED_CODE_END) { +		/* Problem in fixed code section? */ +		strcat(buf, "/* Maybe fixed code section */"); +		return; + +	} else if (address < CONFIG_BOOT_LOAD) { +		/* Problem somewhere before the kernel start address */ +		strcat(buf, "/* Maybe null pointer? */"); +		return; + +	} else if (address >= COREMMR_BASE) { +		strcat(buf, "/* core mmrs */"); +		return; + +	} else if (address >= SYSMMR_BASE) { +		strcat(buf, "/* system mmrs */"); +		return; + +	} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) { +		strcat(buf, "/* on-chip L1 ROM */"); +		return; + +	} else if (address >= L1_SCRATCH_START && address < L1_SCRATCH_START + L1_SCRATCH_LENGTH) { +		strcat(buf, "/* on-chip scratchpad */"); +		return; + +	} else if (address >= physical_mem_end && address < ASYNC_BANK0_BASE) { +		strcat(buf, "/* unconnected memory */"); +		return; + +	} else if (address >= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE && address < BOOT_ROM_START) { +		strcat(buf, "/* reserved memory */"); +		return; + +	} else if (address >= L1_DATA_A_START && address < L1_DATA_A_START + L1_DATA_A_LENGTH) { +		strcat(buf, "/* on-chip Data Bank A */"); +		return; + +	} else if (address >= L1_DATA_B_START && address < L1_DATA_B_START + L1_DATA_B_LENGTH) { +		strcat(buf, "/* on-chip Data Bank B */"); +		return; +	} + +	/* +	 * Don't walk any of the vmas if we are oopsing, it has been known +	 * to cause problems - corrupt vmas (kernel crashes) cause double faults +	 */ +	if (oops_in_progress) { +		strcat(buf, "/* kernel dynamic memory (maybe user-space) */"); +		return; +	} + +	/* looks like we're off in user-land, so let's walk all the +	 * mappings of all our processes and see if we can't be a whee +	 * bit more specific +	 */ +	write_lock_irqsave(&tasklist_lock, flags); +	for_each_process(p) { +		mm = (in_atomic ? p->mm : get_task_mm(p)); +		if (!mm) +			continue; + +		if (!down_read_trylock(&mm->mmap_sem)) { +			if (!in_atomic) +				mmput(mm); +			continue; +		} + +		for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) { +			struct vm_area_struct *vma; + +			vma = rb_entry(n, struct vm_area_struct, vm_rb); + +			if (address >= vma->vm_start && address < vma->vm_end) { +				char _tmpbuf[256]; +				char *name = p->comm; +				struct file *file = vma->vm_file; + +				if (file) { +					char *d_name = d_path(&file->f_path, _tmpbuf, +						      sizeof(_tmpbuf)); +					if (!IS_ERR(d_name)) +						name = d_name; +				} + +				/* FLAT does not have its text aligned to the start of +				 * the map while FDPIC ELF does ... +				 */ + +				/* before we can check flat/fdpic, we need to +				 * make sure current is valid +				 */ +				if ((unsigned long)current >= FIXED_CODE_START && +				    !((unsigned long)current & 0x3)) { +					if (current->mm && +					    (address > current->mm->start_code) && +					    (address < current->mm->end_code)) +						offset = address - current->mm->start_code; +					else +						offset = (address - vma->vm_start) + +							 (vma->vm_pgoff << PAGE_SHIFT); + +					sprintf(buf, "[ %s + 0x%lx ]", name, offset); +				} else +					sprintf(buf, "[ %s vma:0x%lx-0x%lx]", +						name, vma->vm_start, vma->vm_end); + +				up_read(&mm->mmap_sem); +				if (!in_atomic) +					mmput(mm); + +				if (buf[0] == '\0') +					sprintf(buf, "[ %s ] dynamic memory", name); + +				goto done; +			} +		} + +		up_read(&mm->mmap_sem); +		if (!in_atomic) +			mmput(mm); +	} + +	/* +	 * we were unable to find this address anywhere, +	 * or some MMs were skipped because they were in use. +	 */ +	sprintf(buf, "/* kernel dynamic memory */"); + +done: +	write_unlock_irqrestore(&tasklist_lock, flags); +} + +#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1) + +/* + * Similar to get_user, do some address checking, then dereference + * Return true on success, false on bad address + */ +bool get_mem16(unsigned short *val, unsigned short *address) +{ +	unsigned long addr = (unsigned long)address; + +	/* Check for odd addresses */ +	if (addr & 0x1) +		return false; + +	switch (bfin_mem_access_type(addr, 2)) { +	case BFIN_MEM_ACCESS_CORE: +	case BFIN_MEM_ACCESS_CORE_ONLY: +		*val = *address; +		return true; +	case BFIN_MEM_ACCESS_DMA: +		dma_memcpy(val, address, 2); +		return true; +	case BFIN_MEM_ACCESS_ITEST: +		isram_memcpy(val, address, 2); +		return true; +	default: /* invalid access */ +		return false; +	} +} + +bool get_instruction(unsigned int *val, unsigned short *address) +{ +	unsigned long addr = (unsigned long)address; +	unsigned short opcode0, opcode1; + +	/* Check for odd addresses */ +	if (addr & 0x1) +		return false; + +	/* MMR region will never have instructions */ +	if (addr >= SYSMMR_BASE) +		return false; + +	/* Scratchpad will never have instructions */ +	if (addr >= L1_SCRATCH_START && addr < L1_SCRATCH_START + L1_SCRATCH_LENGTH) +		return false; + +	/* Data banks will never have instructions */ +	if (addr >= BOOT_ROM_START + BOOT_ROM_LENGTH && addr < L1_CODE_START) +		return false; + +	if (!get_mem16(&opcode0, address)) +		return false; + +	/* was this a 32-bit instruction? If so, get the next 16 bits */ +	if ((opcode0 & 0xc000) == 0xc000) { +		if (!get_mem16(&opcode1, address + 1)) +			return false; +		*val = (opcode0 << 16) + opcode1; +	} else +		*val = opcode0; + +	return true; +} + +#if defined(CONFIG_DEBUG_BFIN_HWTRACE_ON) +/* + * decode the instruction if we are printing out the trace, as it + * makes things easier to follow, without running it through objdump + * Decode the change of flow, and the common load/store instructions + * which are the main cause for faults, and discontinuities in the trace + * buffer. + */ + +#define ProgCtrl_opcode         0x0000 +#define ProgCtrl_poprnd_bits    0 +#define ProgCtrl_poprnd_mask    0xf +#define ProgCtrl_prgfunc_bits   4 +#define ProgCtrl_prgfunc_mask   0xf +#define ProgCtrl_code_bits      8 +#define ProgCtrl_code_mask      0xff + +static void decode_ProgCtrl_0(unsigned int opcode) +{ +	int poprnd  = ((opcode >> ProgCtrl_poprnd_bits) & ProgCtrl_poprnd_mask); +	int prgfunc = ((opcode >> ProgCtrl_prgfunc_bits) & ProgCtrl_prgfunc_mask); + +	if (prgfunc == 0 && poprnd == 0) +		pr_cont("NOP"); +	else if (prgfunc == 1 && poprnd == 0) +		pr_cont("RTS"); +	else if (prgfunc == 1 && poprnd == 1) +		pr_cont("RTI"); +	else if (prgfunc == 1 && poprnd == 2) +		pr_cont("RTX"); +	else if (prgfunc == 1 && poprnd == 3) +		pr_cont("RTN"); +	else if (prgfunc == 1 && poprnd == 4) +		pr_cont("RTE"); +	else if (prgfunc == 2 && poprnd == 0) +		pr_cont("IDLE"); +	else if (prgfunc == 2 && poprnd == 3) +		pr_cont("CSYNC"); +	else if (prgfunc == 2 && poprnd == 4) +		pr_cont("SSYNC"); +	else if (prgfunc == 2 && poprnd == 5) +		pr_cont("EMUEXCPT"); +	else if (prgfunc == 3) +		pr_cont("CLI R%i", poprnd); +	else if (prgfunc == 4) +		pr_cont("STI R%i", poprnd); +	else if (prgfunc == 5) +		pr_cont("JUMP (P%i)", poprnd); +	else if (prgfunc == 6) +		pr_cont("CALL (P%i)", poprnd); +	else if (prgfunc == 7) +		pr_cont("CALL (PC + P%i)", poprnd); +	else if (prgfunc == 8) +		pr_cont("JUMP (PC + P%i", poprnd); +	else if (prgfunc == 9) +		pr_cont("RAISE %i", poprnd); +	else if (prgfunc == 10) +		pr_cont("EXCPT %i", poprnd); +	else +		pr_cont("0x%04x", opcode); + +} + +#define BRCC_opcode             0x1000 +#define BRCC_offset_bits        0 +#define BRCC_offset_mask        0x3ff +#define BRCC_B_bits             10 +#define BRCC_B_mask             0x1 +#define BRCC_T_bits             11 +#define BRCC_T_mask             0x1 +#define BRCC_code_bits          12 +#define BRCC_code_mask          0xf + +static void decode_BRCC_0(unsigned int opcode) +{ +	int B = ((opcode >> BRCC_B_bits) & BRCC_B_mask); +	int T = ((opcode >> BRCC_T_bits) & BRCC_T_mask); + +	pr_cont("IF %sCC JUMP pcrel %s", T ? "" : "!", B ? "(BP)" : ""); +} + +#define CALLa_opcode    0xe2000000 +#define CALLa_addr_bits 0 +#define CALLa_addr_mask 0xffffff +#define CALLa_S_bits    24 +#define CALLa_S_mask    0x1 +#define CALLa_code_bits 25 +#define CALLa_code_mask 0x7f + +static void decode_CALLa_0(unsigned int opcode) +{ +	int S   = ((opcode >> (CALLa_S_bits - 16)) & CALLa_S_mask); + +	if (S) +		pr_cont("CALL pcrel"); +	else +		pr_cont("JUMP.L"); +} + +#define LoopSetup_opcode                0xe0800000 +#define LoopSetup_eoffset_bits          0 +#define LoopSetup_eoffset_mask          0x3ff +#define LoopSetup_dontcare_bits         10 +#define LoopSetup_dontcare_mask         0x3 +#define LoopSetup_reg_bits              12 +#define LoopSetup_reg_mask              0xf +#define LoopSetup_soffset_bits          16 +#define LoopSetup_soffset_mask          0xf +#define LoopSetup_c_bits                20 +#define LoopSetup_c_mask                0x1 +#define LoopSetup_rop_bits              21 +#define LoopSetup_rop_mask              0x3 +#define LoopSetup_code_bits             23 +#define LoopSetup_code_mask             0x1ff + +static void decode_LoopSetup_0(unsigned int opcode) +{ +	int c   = ((opcode >> LoopSetup_c_bits)   & LoopSetup_c_mask); +	int reg = ((opcode >> LoopSetup_reg_bits) & LoopSetup_reg_mask); +	int rop = ((opcode >> LoopSetup_rop_bits) & LoopSetup_rop_mask); + +	pr_cont("LSETUP <> LC%i", c); +	if ((rop & 1) == 1) +		pr_cont("= P%i", reg); +	if ((rop & 2) == 2) +		pr_cont(" >> 0x1"); +} + +#define DspLDST_opcode          0x9c00 +#define DspLDST_reg_bits        0 +#define DspLDST_reg_mask        0x7 +#define DspLDST_i_bits          3 +#define DspLDST_i_mask          0x3 +#define DspLDST_m_bits          5 +#define DspLDST_m_mask          0x3 +#define DspLDST_aop_bits        7 +#define DspLDST_aop_mask        0x3 +#define DspLDST_W_bits          9 +#define DspLDST_W_mask          0x1 +#define DspLDST_code_bits       10 +#define DspLDST_code_mask       0x3f + +static void decode_dspLDST_0(unsigned int opcode) +{ +	int i   = ((opcode >> DspLDST_i_bits) & DspLDST_i_mask); +	int m   = ((opcode >> DspLDST_m_bits) & DspLDST_m_mask); +	int W   = ((opcode >> DspLDST_W_bits) & DspLDST_W_mask); +	int aop = ((opcode >> DspLDST_aop_bits) & DspLDST_aop_mask); +	int reg = ((opcode >> DspLDST_reg_bits) & DspLDST_reg_mask); + +	if (W == 0) { +		pr_cont("R%i", reg); +		switch (m) { +		case 0: +			pr_cont(" = "); +			break; +		case 1: +			pr_cont(".L = "); +			break; +		case 2: +			pr_cont(".W = "); +			break; +		} +	} + +	pr_cont("[ I%i", i); + +	switch (aop) { +	case 0: +		pr_cont("++ ]"); +		break; +	case 1: +		pr_cont("-- ]"); +		break; +	} + +	if (W == 1) { +		pr_cont(" = R%i", reg); +		switch (m) { +		case 1: +			pr_cont(".L = "); +			break; +		case 2: +			pr_cont(".W = "); +			break; +		} +	} +} + +#define LDST_opcode             0x9000 +#define LDST_reg_bits           0 +#define LDST_reg_mask           0x7 +#define LDST_ptr_bits           3 +#define LDST_ptr_mask           0x7 +#define LDST_Z_bits             6 +#define LDST_Z_mask             0x1 +#define LDST_aop_bits           7 +#define LDST_aop_mask           0x3 +#define LDST_W_bits             9 +#define LDST_W_mask             0x1 +#define LDST_sz_bits            10 +#define LDST_sz_mask            0x3 +#define LDST_code_bits          12 +#define LDST_code_mask          0xf + +static void decode_LDST_0(unsigned int opcode) +{ +	int Z   = ((opcode >> LDST_Z_bits) & LDST_Z_mask); +	int W   = ((opcode >> LDST_W_bits) & LDST_W_mask); +	int sz  = ((opcode >> LDST_sz_bits) & LDST_sz_mask); +	int aop = ((opcode >> LDST_aop_bits) & LDST_aop_mask); +	int reg = ((opcode >> LDST_reg_bits) & LDST_reg_mask); +	int ptr = ((opcode >> LDST_ptr_bits) & LDST_ptr_mask); + +	if (W == 0) +		pr_cont("%s%i = ", (sz == 0 && Z == 1) ? "P" : "R", reg); + +	switch (sz) { +	case 1: +		pr_cont("W"); +		break; +	case 2: +		pr_cont("B"); +		break; +	} + +	pr_cont("[P%i", ptr); + +	switch (aop) { +	case 0: +		pr_cont("++"); +		break; +	case 1: +		pr_cont("--"); +		break; +	} +	pr_cont("]"); + +	if (W == 1) +		pr_cont(" = %s%i ", (sz == 0 && Z == 1) ? "P" : "R", reg); + +	if (sz) { +		if (Z) +			pr_cont(" (X)"); +		else +			pr_cont(" (Z)"); +	} +} + +#define LDSTii_opcode           0xa000 +#define LDSTii_reg_bit          0 +#define LDSTii_reg_mask         0x7 +#define LDSTii_ptr_bit          3 +#define LDSTii_ptr_mask         0x7 +#define LDSTii_offset_bit       6 +#define LDSTii_offset_mask      0xf +#define LDSTii_op_bit           10 +#define LDSTii_op_mask          0x3 +#define LDSTii_W_bit            12 +#define LDSTii_W_mask           0x1 +#define LDSTii_code_bit         13 +#define LDSTii_code_mask        0x7 + +static void decode_LDSTii_0(unsigned int opcode) +{ +	int reg = ((opcode >> LDSTii_reg_bit) & LDSTii_reg_mask); +	int ptr = ((opcode >> LDSTii_ptr_bit) & LDSTii_ptr_mask); +	int offset = ((opcode >> LDSTii_offset_bit) & LDSTii_offset_mask); +	int op = ((opcode >> LDSTii_op_bit) & LDSTii_op_mask); +	int W = ((opcode >> LDSTii_W_bit) & LDSTii_W_mask); + +	if (W == 0) { +		pr_cont("%s%i = %s[P%i + %i]", op == 3 ? "R" : "P", reg, +			op == 1 || op == 2 ? "" : "W", ptr, offset); +		if (op == 2) +			pr_cont("(Z)"); +		if (op == 3) +			pr_cont("(X)"); +	} else { +		pr_cont("%s[P%i + %i] = %s%i", op == 0 ? "" : "W", ptr, +			offset, op == 3 ? "P" : "R", reg); +	} +} + +#define LDSTidxI_opcode         0xe4000000 +#define LDSTidxI_offset_bits    0 +#define LDSTidxI_offset_mask    0xffff +#define LDSTidxI_reg_bits       16 +#define LDSTidxI_reg_mask       0x7 +#define LDSTidxI_ptr_bits       19 +#define LDSTidxI_ptr_mask       0x7 +#define LDSTidxI_sz_bits        22 +#define LDSTidxI_sz_mask        0x3 +#define LDSTidxI_Z_bits         24 +#define LDSTidxI_Z_mask         0x1 +#define LDSTidxI_W_bits         25 +#define LDSTidxI_W_mask         0x1 +#define LDSTidxI_code_bits      26 +#define LDSTidxI_code_mask      0x3f + +static void decode_LDSTidxI_0(unsigned int opcode) +{ +	int Z      = ((opcode >> LDSTidxI_Z_bits)      & LDSTidxI_Z_mask); +	int W      = ((opcode >> LDSTidxI_W_bits)      & LDSTidxI_W_mask); +	int sz     = ((opcode >> LDSTidxI_sz_bits)     & LDSTidxI_sz_mask); +	int reg    = ((opcode >> LDSTidxI_reg_bits)    & LDSTidxI_reg_mask); +	int ptr    = ((opcode >> LDSTidxI_ptr_bits)    & LDSTidxI_ptr_mask); +	int offset = ((opcode >> LDSTidxI_offset_bits) & LDSTidxI_offset_mask); + +	if (W == 0) +		pr_cont("%s%i = ", sz == 0 && Z == 1 ? "P" : "R", reg); + +	if (sz == 1) +		pr_cont("W"); +	if (sz == 2) +		pr_cont("B"); + +	pr_cont("[P%i + %s0x%x]", ptr, offset & 0x20 ? "-" : "", +		(offset & 0x1f) << 2); + +	if (W == 0 && sz != 0) { +		if (Z) +			pr_cont("(X)"); +		else +			pr_cont("(Z)"); +	} + +	if (W == 1) +		pr_cont("= %s%i", (sz == 0 && Z == 1) ? "P" : "R", reg); + +} + +static void decode_opcode(unsigned int opcode) +{ +#ifdef CONFIG_BUG +	if (opcode == BFIN_BUG_OPCODE) +		pr_cont("BUG"); +	else +#endif +	if ((opcode & 0xffffff00) == ProgCtrl_opcode) +		decode_ProgCtrl_0(opcode); +	else if ((opcode & 0xfffff000) == BRCC_opcode) +		decode_BRCC_0(opcode); +	else if ((opcode & 0xfffff000) == 0x2000) +		pr_cont("JUMP.S"); +	else if ((opcode & 0xfe000000) == CALLa_opcode) +		decode_CALLa_0(opcode); +	else if ((opcode & 0xff8000C0) == LoopSetup_opcode) +		decode_LoopSetup_0(opcode); +	else if ((opcode & 0xfffffc00) == DspLDST_opcode) +		decode_dspLDST_0(opcode); +	else if ((opcode & 0xfffff000) == LDST_opcode) +		decode_LDST_0(opcode); +	else if ((opcode & 0xffffe000) == LDSTii_opcode) +		decode_LDSTii_0(opcode); +	else if ((opcode & 0xfc000000) == LDSTidxI_opcode) +		decode_LDSTidxI_0(opcode); +	else if (opcode & 0xffff0000) +		pr_cont("0x%08x", opcode); +	else +		pr_cont("0x%04x", opcode); +} + +#define BIT_MULTI_INS 0x08000000 +static void decode_instruction(unsigned short *address) +{ +	unsigned int opcode; + +	if (!get_instruction(&opcode, address)) +		return; + +	decode_opcode(opcode); + +	/* If things are a 32-bit instruction, it has the possibility of being +	 * a multi-issue instruction (a 32-bit, and 2 16 bit instrucitions) +	 * This test collidates with the unlink instruction, so disallow that +	 */ +	if ((opcode & 0xc0000000) == 0xc0000000 && +	    (opcode & BIT_MULTI_INS) && +	    (opcode & 0xe8000000) != 0xe8000000) { +		pr_cont(" || "); +		if (!get_instruction(&opcode, address + 2)) +			return; +		decode_opcode(opcode); +		pr_cont(" || "); +		if (!get_instruction(&opcode, address + 3)) +			return; +		decode_opcode(opcode); +	} +} +#endif + +void dump_bfin_trace_buffer(void) +{ +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON +	int tflags, i = 0, fault = 0; +	char buf[150]; +	unsigned short *addr; +	unsigned int cpu = raw_smp_processor_id(); +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND +	int j, index; +#endif + +	trace_buffer_save(tflags); + +	pr_notice("Hardware Trace:\n"); + +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND +	pr_notice("WARNING: Expanded trace turned on - can not trace exceptions\n"); +#endif + +	if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) { +		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { +			addr = (unsigned short *)bfin_read_TBUF(); +			decode_address(buf, (unsigned long)addr); +			pr_notice("%4i Target : %s\n", i, buf); +			/* Normally, the faulting instruction doesn't go into +			 * the trace buffer, (since it doesn't commit), so +			 * we print out the fault address here +			 */ +			if (!fault && addr == ((unsigned short *)evt_ivhw)) { +				addr = (unsigned short *)bfin_read_TBUF(); +				decode_address(buf, (unsigned long)addr); +				pr_notice("      FAULT : %s ", buf); +				decode_instruction(addr); +				pr_cont("\n"); +				fault = 1; +				continue; +			} +			if (!fault && addr == (unsigned short *)trap && +				(cpu_pda[cpu].seqstat & SEQSTAT_EXCAUSE) > VEC_EXCPT15) { +				decode_address(buf, cpu_pda[cpu].icplb_fault_addr); +				pr_notice("      FAULT : %s ", buf); +				decode_instruction((unsigned short *)cpu_pda[cpu].icplb_fault_addr); +				pr_cont("\n"); +				fault = 1; +			} +			addr = (unsigned short *)bfin_read_TBUF(); +			decode_address(buf, (unsigned long)addr); +			pr_notice("     Source : %s ", buf); +			decode_instruction(addr); +			pr_cont("\n"); +		} +	} + +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND +	if (trace_buff_offset) +		index = trace_buff_offset / 4; +	else +		index = EXPAND_LEN; + +	j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128; +	while (j) { +		decode_address(buf, software_trace_buff[index]); +		pr_notice("%4i Target : %s\n", i, buf); +		index -= 1; +		if (index < 0) +			index = EXPAND_LEN; +		decode_address(buf, software_trace_buff[index]); +		pr_notice("     Source : %s ", buf); +		decode_instruction((unsigned short *)software_trace_buff[index]); +		pr_cont("\n"); +		index -= 1; +		if (index < 0) +			index = EXPAND_LEN; +		j--; +		i++; +	} +#endif + +	trace_buffer_restore(tflags); +#endif +} +EXPORT_SYMBOL(dump_bfin_trace_buffer); + +void dump_bfin_process(struct pt_regs *fp) +{ +	/* We should be able to look at fp->ipend, but we don't push it on the +	 * stack all the time, so do this until we fix that */ +	unsigned int context = bfin_read_IPEND(); + +	if (oops_in_progress) +		pr_emerg("Kernel OOPS in progress\n"); + +	if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) +		pr_notice("HW Error context\n"); +	else if (context & 0x0020) +		pr_notice("Deferred Exception context\n"); +	else if (context & 0x3FC0) +		pr_notice("Interrupt context\n"); +	else if (context & 0x4000) +		pr_notice("Deferred Interrupt context\n"); +	else if (context & 0x8000) +		pr_notice("Kernel process context\n"); + +	/* Because we are crashing, and pointers could be bad, we check things +	 * pretty closely before we use them +	 */ +	if ((unsigned long)current >= FIXED_CODE_START && +	    !((unsigned long)current & 0x3) && current->pid) { +		pr_notice("CURRENT PROCESS:\n"); +		if (current->comm >= (char *)FIXED_CODE_START) +			pr_notice("COMM=%s PID=%d", +				current->comm, current->pid); +		else +			pr_notice("COMM= invalid"); + +		pr_cont("  CPU=%d\n", current_thread_info()->cpu); +		if (!((unsigned long)current->mm & 0x3) && +			(unsigned long)current->mm >= FIXED_CODE_START) { +			pr_notice("TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n", +				(void *)current->mm->start_code, +				(void *)current->mm->end_code, +				(void *)current->mm->start_data, +				(void *)current->mm->end_data); +			pr_notice(" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n", +				(void *)current->mm->end_data, +				(void *)current->mm->brk, +				(void *)current->mm->start_stack); +		} else +			pr_notice("invalid mm\n"); +	} else +		pr_notice("No Valid process in current context\n"); +} + +void dump_bfin_mem(struct pt_regs *fp) +{ +	unsigned short *addr, *erraddr, val = 0, err = 0; +	char sti = 0, buf[6]; + +	erraddr = (void *)fp->pc; + +	pr_notice("return address: [0x%p]; contents of:", erraddr); + +	for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10; +	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10; +	     addr++) { +		if (!((unsigned long)addr & 0xF)) +			pr_notice("0x%p: ", addr); + +		if (!get_mem16(&val, addr)) { +				val = 0; +				sprintf(buf, "????"); +		} else +			sprintf(buf, "%04x", val); + +		if (addr == erraddr) { +			pr_cont("[%s]", buf); +			err = val; +		} else +			pr_cont(" %s ", buf); + +		/* Do any previous instructions turn on interrupts? */ +		if (addr <= erraddr &&				/* in the past */ +		    ((val >= 0x0040 && val <= 0x0047) ||	/* STI instruction */ +		      val == 0x017b))				/* [SP++] = RETI */ +			sti = 1; +	} + +	pr_cont("\n"); + +	/* Hardware error interrupts can be deferred */ +	if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR && +	    oops_in_progress)){ +		pr_notice("Looks like this was a deferred error - sorry\n"); +#ifndef CONFIG_DEBUG_HWERR +		pr_notice("The remaining message may be meaningless\n"); +		pr_notice("You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n"); +#else +		/* If we are handling only one peripheral interrupt +		 * and current mm and pid are valid, and the last error +		 * was in that user space process's text area +		 * print it out - because that is where the problem exists +		 */ +		if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) && +		     (current->pid && current->mm)) { +			/* And the last RETI points to the current userspace context */ +			if ((fp + 1)->pc >= current->mm->start_code && +			    (fp + 1)->pc <= current->mm->end_code) { +				pr_notice("It might be better to look around here :\n"); +				pr_notice("-------------------------------------------\n"); +				show_regs(fp + 1); +				pr_notice("-------------------------------------------\n"); +			} +		} +#endif +	} +} + +void show_regs(struct pt_regs *fp) +{ +	char buf[150]; +	struct irqaction *action; +	unsigned int i; +	unsigned long flags = 0; +	unsigned int cpu = raw_smp_processor_id(); +	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); + +	pr_notice("\n"); +	if (CPUID != bfin_cpuid()) +		pr_notice("Compiled for cpu family 0x%04x (Rev %d), " +			"but running on:0x%04x (Rev %d)\n", +			CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid()); + +	pr_notice("ADSP-%s-0.%d", +		CPU, bfin_compiled_revid()); + +	if (bfin_compiled_revid() !=  bfin_revid()) +		pr_cont("(Detected 0.%d)", bfin_revid()); + +	pr_cont(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n", +		get_cclk()/1000000, get_sclk()/1000000, +#ifdef CONFIG_MPU +		"mpu on" +#else +		"mpu off" +#endif +		); + +	pr_notice("%s", linux_banner); + +	pr_notice("\nSEQUENCER STATUS:\t\t%s\n", print_tainted()); +	pr_notice(" SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n", +		(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg); +	if (fp->ipend & EVT_IRPTEN) +		pr_notice("  Global Interrupts Disabled (IPEND[4])\n"); +	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 | +			EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR))) +		pr_notice("  Peripheral interrupts masked off\n"); +	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14))) +		pr_notice("  Kernel interrupts masked off\n"); +	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) { +		pr_notice("  HWERRCAUSE: 0x%lx\n", +			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14); +#ifdef EBIU_ERRMST +		/* If the error was from the EBIU, print it out */ +		if (bfin_read_EBIU_ERRMST() & CORE_ERROR) { +			pr_notice("  EBIU Error Reason  : 0x%04x\n", +				bfin_read_EBIU_ERRMST()); +			pr_notice("  EBIU Error Address : 0x%08x\n", +				bfin_read_EBIU_ERRADD()); +		} +#endif +	} +	pr_notice("  EXCAUSE   : 0x%lx\n", +		fp->seqstat & SEQSTAT_EXCAUSE); +	for (i = 2; i <= 15 ; i++) { +		if (fp->ipend & (1 << i)) { +			if (i != 4) { +				decode_address(buf, bfin_read32(EVT0 + 4*i)); +				pr_notice("  physical IVG%i asserted : %s\n", i, buf); +			} else +				pr_notice("  interrupts disabled\n"); +		} +	} + +	/* if no interrupts are going off, don't print this out */ +	if (fp->ipend & ~0x3F) { +		for (i = 0; i < (NR_IRQS - 1); i++) { +			if (!in_atomic) +				raw_spin_lock_irqsave(&irq_desc[i].lock, flags); + +			action = irq_desc[i].action; +			if (!action) +				goto unlock; + +			decode_address(buf, (unsigned int)action->handler); +			pr_notice("  logical irq %3d mapped  : %s", i, buf); +			for (action = action->next; action; action = action->next) { +				decode_address(buf, (unsigned int)action->handler); +				pr_cont(", %s", buf); +			} +			pr_cont("\n"); +unlock: +			if (!in_atomic) +				raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags); +		} +	} + +	decode_address(buf, fp->rete); +	pr_notice(" RETE: %s\n", buf); +	decode_address(buf, fp->retn); +	pr_notice(" RETN: %s\n", buf); +	decode_address(buf, fp->retx); +	pr_notice(" RETX: %s\n", buf); +	decode_address(buf, fp->rets); +	pr_notice(" RETS: %s\n", buf); +	decode_address(buf, fp->pc); +	pr_notice(" PC  : %s\n", buf); + +	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) && +	    (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) { +		decode_address(buf, cpu_pda[cpu].dcplb_fault_addr); +		pr_notice("DCPLB_FAULT_ADDR: %s\n", buf); +		decode_address(buf, cpu_pda[cpu].icplb_fault_addr); +		pr_notice("ICPLB_FAULT_ADDR: %s\n", buf); +	} + +	pr_notice("PROCESSOR STATE:\n"); +	pr_notice(" R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n", +		fp->r0, fp->r1, fp->r2, fp->r3); +	pr_notice(" R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n", +		fp->r4, fp->r5, fp->r6, fp->r7); +	pr_notice(" P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n", +		fp->p0, fp->p1, fp->p2, fp->p3); +	pr_notice(" P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n", +		fp->p4, fp->p5, fp->fp, (long)fp); +	pr_notice(" LB0: %08lx    LT0: %08lx    LC0: %08lx\n", +		fp->lb0, fp->lt0, fp->lc0); +	pr_notice(" LB1: %08lx    LT1: %08lx    LC1: %08lx\n", +		fp->lb1, fp->lt1, fp->lc1); +	pr_notice(" B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n", +		fp->b0, fp->l0, fp->m0, fp->i0); +	pr_notice(" B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n", +		fp->b1, fp->l1, fp->m1, fp->i1); +	pr_notice(" B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n", +		fp->b2, fp->l2, fp->m2, fp->i2); +	pr_notice(" B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n", +		fp->b3, fp->l3, fp->m3, fp->i3); +	pr_notice("A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n", +		fp->a0w, fp->a0x, fp->a1w, fp->a1x); + +	pr_notice("USP : %08lx  ASTAT: %08lx\n", +		rdusp(), fp->astat); + +	pr_notice("\n"); +} | 
