diff options
Diffstat (limited to 'arch/blackfin/mach-bf533/boards/ezkit.c')
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/ezkit.c | 145 |
1 files changed, 68 insertions, 77 deletions
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 4e3e511bf146..d4689dcc198e 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -1,31 +1,9 @@ /* - * File: arch/blackfin/mach-bf533/ezkit.c - * Based on: Original Work - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: 2005 - * Description: - * - * Modified: Robin Getz <rgetz@blackfin.uclinux.org> - Named the boards - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -33,12 +11,14 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/plat-ram.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif #include <linux/irq.h> +#include <linux/i2c.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> @@ -56,17 +36,19 @@ static struct platform_device rtc_device = { }; #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) -static struct platform_device bfin_fb_adv7393_device = { - .name = "bfin-adv7393", -}; -#endif - /* * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. */ #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#include <linux/smc91x.h> + +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { { .name = "smc91x-regs", @@ -84,57 +66,75 @@ static struct platform_device smc91x_device = { .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev = { + .platform_data = &smc91x_info, + }, }; #endif -#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE) -static const char *map_probes[] = { - "stm_flash", - NULL, +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition ezkit_partitions_a[] = { + { + .name = "bootloader(nor a)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor a)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, }; -static struct platdata_mtd_ram stm_pri_data_a = { - .mapname = "Flash A Primary", - .map_probes = map_probes, - .bankwidth = 2, +static struct physmap_flash_data ezkit_flash_data_a = { + .width = 2, + .parts = ezkit_partitions_a, + .nr_parts = ARRAY_SIZE(ezkit_partitions_a), }; -static struct resource stm_pri_resource_a = { +static struct resource ezkit_flash_resource_a = { .start = 0x20000000, .end = 0x200fffff, .flags = IORESOURCE_MEM, }; -static struct platform_device stm_pri_device_a = { - .name = "mtd-ram", +static struct platform_device ezkit_flash_device_a = { + .name = "physmap-flash", .id = 0, .dev = { - .platform_data = &stm_pri_data_a, + .platform_data = &ezkit_flash_data_a, }, .num_resources = 1, - .resource = &stm_pri_resource_a, + .resource = &ezkit_flash_resource_a, +}; + +static struct mtd_partition ezkit_partitions_b[] = { + { + .name = "file system(nor b)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, }; -static struct platdata_mtd_ram stm_pri_data_b = { - .mapname = "Flash B Primary", - .map_probes = map_probes, - .bankwidth = 2, +static struct physmap_flash_data ezkit_flash_data_b = { + .width = 2, + .parts = ezkit_partitions_b, + .nr_parts = ARRAY_SIZE(ezkit_partitions_b), }; -static struct resource stm_pri_resource_b = { +static struct resource ezkit_flash_resource_b = { .start = 0x20100000, .end = 0x201fffff, .flags = IORESOURCE_MEM, }; -static struct platform_device stm_pri_device_b = { - .name = "mtd-ram", +static struct platform_device ezkit_flash_device_b = { + .name = "physmap-flash", .id = 4, .dev = { - .platform_data = &stm_pri_data_b, + .platform_data = &ezkit_flash_data_b, }, .num_resources = 1, - .resource = &stm_pri_resource_b, + .resource = &ezkit_flash_resource_b, }; #endif @@ -263,7 +263,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) { - .modalias = "ad1836-spi", + .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, @@ -389,19 +389,6 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) #include <linux/i2c-gpio.h> @@ -449,13 +436,21 @@ static struct platform_device bfin_dpmc = { }, }; +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + { + I2C_BOARD_INFO("bfin-adv7393", 0x2B), + }, +#endif +}; + static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE) - &stm_pri_device_a, - &stm_pri_device_b, +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) + &ezkit_flash_device_a, + &ezkit_flash_device_b, #endif #if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) @@ -471,10 +466,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) - &bfin_fb_adv7393_device, -#endif - #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, #endif @@ -496,8 +487,6 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) &i2c_gpio_device, #endif - - &bfin_gpios_device, }; static int __init ezkit_init(void) @@ -505,6 +494,8 @@ static int __init ezkit_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); return 0; } |