diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/H8606.c | 2 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/blackstamp.c | 25 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/cm_bf533.c | 10 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/ezkit.c | 2 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/ip0x.c | 11 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/stamp.c | 30 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/dma.c | 2 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/include/mach/bfin_serial.h | 14 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h | 74 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/include/mach/blackfin.h | 30 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/include/mach/cdefBF532.h | 63 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/include/mach/defBF532.h | 128 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/include/mach/fio_flag.h | 55 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/include/mach/gpio.h | 2 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf533/include/mach/pll.h | 58 |
15 files changed, 118 insertions, 388 deletions
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 2ce7b16faee1..d4bfcea56828 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -286,7 +286,7 @@ static struct resource bfin_uart0_resources[] = { }, }; -unsigned short bfin_uart0_peripherals[] = { +static unsigned short bfin_uart0_peripherals[] = { P_UART0_TX, P_UART0_RX, 0 }; diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 20c102285bef..87b5af3693c1 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -25,7 +25,6 @@ #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> #include <asm/dpmc.h> -#include <mach/fio_flag.h> /* * Name the Board for the /proc/cpuinfo @@ -225,7 +224,7 @@ static struct resource bfin_uart0_resources[] = { }, }; -unsigned short bfin_uart0_peripherals[] = { +static unsigned short bfin_uart0_peripherals[] = { P_UART0_TX, P_UART0_RX, 0 }; @@ -290,9 +289,9 @@ static struct resource bfin_sport0_uart_resources[] = { }, }; -unsigned short bfin_sport0_peripherals[] = { +static unsigned short bfin_sport0_peripherals[] = { P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, - P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 + P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0 }; static struct platform_device bfin_sport0_uart_device = { @@ -324,9 +323,9 @@ static struct resource bfin_sport1_uart_resources[] = { }, }; -unsigned short bfin_sport1_peripherals[] = { +static unsigned short bfin_sport1_peripherals[] = { P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, - P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 + P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0 }; static struct platform_device bfin_sport1_uart_device = { @@ -476,10 +475,16 @@ static int __init blackstamp_init(void) return ret; #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */ - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0); - bfin_write_FIO_FLAG_S(PF0); - SSYNC(); + /* + * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC. + * the bfin-async-map driver takes care of flipping between + * flash and ethernet when necessary. + */ + ret = gpio_request(GPIO_PF0, "enet_cpld"); + if (!ret) { + gpio_direction_output(GPIO_PF0, 1); + gpio_free(GPIO_PF0); + } #endif spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index adbe62a81e25..4d5604eaa7c2 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -271,7 +271,7 @@ static struct resource bfin_uart0_resources[] = { }, }; -unsigned short bfin_uart0_peripherals[] = { +static unsigned short bfin_uart0_peripherals[] = { P_UART0_TX, P_UART0_RX, 0 }; @@ -336,9 +336,9 @@ static struct resource bfin_sport0_uart_resources[] = { }, }; -unsigned short bfin_sport0_peripherals[] = { +static unsigned short bfin_sport0_peripherals[] = { P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, - P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 + P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0 }; static struct platform_device bfin_sport0_uart_device = { @@ -370,9 +370,9 @@ static struct resource bfin_sport1_uart_resources[] = { }, }; -unsigned short bfin_sport1_peripherals[] = { +static unsigned short bfin_sport1_peripherals[] = { P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, - P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 + P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0 }; static struct platform_device bfin_sport1_uart_device = { diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index a1cb8e7c1010..b67b91d82242 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -349,7 +349,7 @@ static struct resource bfin_uart0_resources[] = { }, }; -unsigned short bfin_uart0_peripherals[] = { +static unsigned short bfin_uart0_peripherals[] = { P_UART0_TX, P_UART0_RX, 0 }; diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index 5ba4b02a12eb..f869a3711480 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -22,7 +22,6 @@ #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> -#include <mach/fio_flag.h> /* * Name the Board for the /proc/cpuinfo @@ -174,7 +173,7 @@ static struct resource bfin_uart0_resources[] = { }, }; -unsigned short bfin_uart0_peripherals[] = { +static unsigned short bfin_uart0_peripherals[] = { P_UART0_TX, P_UART0_RX, 0 }; @@ -295,15 +294,7 @@ static int __init ip0x_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(ip0x_devices, ARRAY_SIZE(ip0x_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - for (i = 0; i < ARRAY_SIZE(bfin_spi_board_info); ++i) { - int j = 1 << bfin_spi_board_info[i].chip_select; - /* set spi cs to 1 */ - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | j); - bfin_write_FIO_FLAG_S(j); - } spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); -#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index b3b1cdea2703..43224ef00b8c 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -24,7 +24,6 @@ #include <asm/reboot.h> #include <asm/portmux.h> #include <asm/dpmc.h> -#include <mach/fio_flag.h> /* * Name the Board for the /proc/cpuinfo @@ -354,7 +353,7 @@ static struct resource bfin_uart0_resources[] = { }, }; -unsigned short bfin_uart0_peripherals[] = { +static unsigned short bfin_uart0_peripherals[] = { P_UART0_TX, P_UART0_RX, 0 }; @@ -419,9 +418,9 @@ static struct resource bfin_sport0_uart_resources[] = { }, }; -unsigned short bfin_sport0_peripherals[] = { +static unsigned short bfin_sport0_peripherals[] = { P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, - P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 + P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0 }; static struct platform_device bfin_sport0_uart_device = { @@ -453,9 +452,9 @@ static struct resource bfin_sport1_uart_resources[] = { }, }; -unsigned short bfin_sport1_peripherals[] = { +static unsigned short bfin_sport1_peripherals[] = { P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, - P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 + P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0 }; static struct platform_device bfin_sport1_uart_device = { @@ -674,10 +673,16 @@ static int __init stamp_init(void) return ret; #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */ - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0); - bfin_write_FIO_FLAG_S(PF0); - SSYNC(); + /* + * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC. + * the bfin-async-map driver takes care of flipping between + * flash and ethernet when necessary. + */ + ret = gpio_request(GPIO_PF0, "enet_cpld"); + if (!ret) { + gpio_direction_output(GPIO_PF0, 1); + gpio_free(GPIO_PF0); + } #endif spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); @@ -713,7 +718,6 @@ void __init native_machine_early_platform_add_devices(void) void native_machine_restart(char *cmd) { /* workaround pull up on cpld / flash pin not being strong enough */ - bfin_write_FIO_INEN(~PF0); - bfin_write_FIO_DIR(PF0); - bfin_write_FIO_FLAG_C(PF0); + gpio_request(GPIO_PF0, "flash_cpld"); + gpio_direction_output(GPIO_PF0, 0); } diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c index 4a14a46a9a68..1f5988d43139 100644 --- a/arch/blackfin/mach-bf533/dma.c +++ b/arch/blackfin/mach-bf533/dma.c @@ -11,7 +11,7 @@ #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS] = { +struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial.h new file mode 100644 index 000000000000..08072c86d5dc --- /dev/null +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial.h @@ -0,0 +1,14 @@ +/* + * mach/bfin_serial.h - Blackfin UART/Serial definitions + * + * Copyright 2006-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_MACH_SERIAL_H__ +#define __BFIN_MACH_SERIAL_H__ + +#define BFIN_UART_NR_PORTS 1 + +#endif diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index 9e1f3defb6bc..45dcaa4f3e41 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -4,36 +4,9 @@ * Licensed under the GPL-2 or later */ -#include <linux/serial.h> #include <asm/dma.h> #include <asm/portmux.h> -#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) -#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) -#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) -#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) -#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) -#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) -#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) - -#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) -#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) -#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) -#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) -#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) -#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) -#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) -#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) - -#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) -#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) - -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) -#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) -#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) - #ifdef CONFIG_BFIN_UART0_CTSRTS # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN @@ -44,51 +17,6 @@ # endif #endif -#define BFIN_UART_TX_FIFO_SIZE 2 - -struct bfin_serial_port { - struct uart_port port; - unsigned int old_status; - int status_irq; - unsigned int lsr; -#ifdef CONFIG_SERIAL_BFIN_DMA - int tx_done; - int tx_count; - struct circ_buf rx_dma_buf; - struct timer_list rx_dma_timer; - int rx_dma_nrows; - unsigned int tx_dma_channel; - unsigned int rx_dma_channel; - struct work_struct tx_dma_workqueue; -#else -# if ANOMALY_05000363 - unsigned int anomaly_threshold; -# endif -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct timer_list cts_timer; - int cts_pin; - int rts_pin; -#endif -}; - -/* The hardware clears the LSR bits upon read, so we need to cache - * some of the more fun bits in software so they don't get lost - * when checking the LSR in other code paths (TX). - */ -static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) -{ - unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); - uart->lsr |= (lsr & (BI|FE|PE|OE)); - return lsr | uart->lsr; -} - -static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) -{ - uart->lsr = 0; - bfin_write16(uart->port.membase + OFFSET_LSR, -1); -} - struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; @@ -120,3 +48,5 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" + +#include <asm/bfin_serial.h> diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h index f4bd6df5d968..e366207fbf12 100644 --- a/arch/blackfin/mach-bf533/include/mach/blackfin.h +++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h @@ -1,7 +1,7 @@ /* - * Copyright 2005-2009 Analog Devices Inc. + * Copyright 2005-2010 Analog Devices Inc. * - * Licensed under the GPL-2 or later + * Licensed under the GPL-2 or later. */ #ifndef _MACH_BLACKFIN_H_ @@ -10,26 +10,14 @@ #define BF533_FAMILY #include "bf533.h" -#include "defBF532.h" #include "anomaly.h" -#if !defined(__ASSEMBLY__) -#include "cdefBF532.h" -#endif - -#define BFIN_UART_NR_PORTS 1 +#include <asm/def_LPBlackfin.h> +#include "defBF532.h" -#define OFFSET_THR 0x00 /* Transmit Holding register */ -#define OFFSET_RBR 0x00 /* Receive Buffer register */ -#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ -#define OFFSET_IER 0x04 /* Interrupt Enable Register */ -#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ -#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ -#define OFFSET_LCR 0x0C /* Line Control Register */ -#define OFFSET_MCR 0x10 /* Modem Control Register */ -#define OFFSET_LSR 0x14 /* Line Status Register */ -#define OFFSET_MSR 0x18 /* Modem Status Register */ -#define OFFSET_SCR 0x1C /* SCR Scratch Register */ -#define OFFSET_GCTL 0x24 /* Global Control Register */ +#ifndef __ASSEMBLY__ +# include <asm/cdef_LPBlackfin.h> +# include "cdefBF532.h" +#endif -#endif /* _MACH_BLACKFIN_H_ */ +#endif diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h index 401e524f5321..fd0cbe4df21a 100644 --- a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h +++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h @@ -1,5 +1,5 @@ /* - * Copyright 2005-2008 Analog Devices Inc. + * Copyright 2005-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later */ @@ -7,9 +7,6 @@ #ifndef _CDEF_BF532_H #define _CDEF_BF532_H -/*include core specific register pointer definitions*/ -#include <asm/cdef_LPBlackfin.h> - /* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) @@ -66,16 +63,10 @@ #define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN,val) /* DMA Traffic controls */ -#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) -#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val) -#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) -#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val) - -/* Alternate deprecated register names (below) provided for backwards code compatibility */ -#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) -#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER,val) -#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) -#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT,val) +#define bfin_read_DMAC_TC_PER() bfin_read16(DMAC_TC_PER) +#define bfin_write_DMAC_TC_PER(val) bfin_write16(DMAC_TC_PER,val) +#define bfin_read_DMAC_TC_CNT() bfin_read16(DMAC_TC_CNT) +#define bfin_write_DMAC_TC_CNT(val) bfin_write16(DMAC_TC_CNT,val) /* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */ #define bfin_read_FIO_DIR() bfin_read16(FIO_DIR) @@ -105,6 +96,47 @@ #define bfin_read_FIO_MASKB_T() bfin_read16(FIO_MASKB_T) #define bfin_write_FIO_MASKB_T(val) bfin_write16(FIO_MASKB_T,val) +#if ANOMALY_05000311 +/* Keep at the CPP expansion to avoid circular header dependency loops */ +#define BFIN_WRITE_FIO_FLAG(name, val) \ + do { \ + unsigned long __flags; \ + __flags = hard_local_irq_save(); \ + bfin_write16(FIO_FLAG_##name, val); \ + bfin_read_CHIPID(); \ + hard_local_irq_restore(__flags); \ + } while (0) +#define bfin_write_FIO_FLAG_D(val) BFIN_WRITE_FIO_FLAG(D, val) +#define bfin_write_FIO_FLAG_C(val) BFIN_WRITE_FIO_FLAG(C, val) +#define bfin_write_FIO_FLAG_S(val) BFIN_WRITE_FIO_FLAG(S, val) +#define bfin_write_FIO_FLAG_T(val) BFIN_WRITE_FIO_FLAG(T, val) + +#define BFIN_READ_FIO_FLAG(name) \ + ({ \ + unsigned long __flags; \ + u16 __ret; \ + __flags = hard_local_irq_save(); \ + __ret = bfin_read16(FIO_FLAG_##name); \ + bfin_read_CHIPID(); \ + hard_local_irq_restore(__flags); \ + __ret; \ + }) +#define bfin_read_FIO_FLAG_D() BFIN_READ_FIO_FLAG(D) +#define bfin_read_FIO_FLAG_C() BFIN_READ_FIO_FLAG(C) +#define bfin_read_FIO_FLAG_S() BFIN_READ_FIO_FLAG(S) +#define bfin_read_FIO_FLAG_T() BFIN_READ_FIO_FLAG(T) + +#else +#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D, val) +#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C, val) +#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S, val) +#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T, val) +#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) +#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) +#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) +#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) +#endif + /* DMA Controller */ #define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) #define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val) @@ -647,7 +679,4 @@ #define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) #define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val) -/* These need to be last due to the cdef/linux inter-dependencies */ -#include <asm/irq.h> - #endif /* _CDEF_BF532_H */ diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h index 3adb0b44e597..2376d5393511 100644 --- a/arch/blackfin/mach-bf533/include/mach/defBF532.h +++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h @@ -1,7 +1,7 @@ /* * System & MMR bit and Address definitions for ADSP-BF532 * - * Copyright 2005-2008 Analog Devices Inc. + * Copyright 2005-2010 Analog Devices Inc. * * Licensed under the ADI BSD license or the GPL-2 (or later) */ @@ -9,9 +9,6 @@ #ifndef _DEF_BF532_H #define _DEF_BF532_H -/* include all Core registers and bit definitions */ -#include <asm/def_LPBlackfin.h> - /*********************************************************************************** */ /* System MMR Register Map */ /*********************************************************************************** */ @@ -182,12 +179,8 @@ #define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ /* DMA Traffic controls */ -#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ -#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ - -/* Alternate deprecated register names (below) provided for backwards code compatibility */ -#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ -#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ +#define DMAC_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMAC_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ /* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ #define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ @@ -432,83 +425,6 @@ #define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ -/* ***************************** UART CONTROLLER MASKS ********************** */ - -/* UART_LCR Register */ - -#define DLAB 0x80 -#define SB 0x40 -#define STP 0x20 -#define EPS 0x10 -#define PEN 0x08 -#define STB 0x04 -#define WLS(x) ((x-5) & 0x03) - -#define DLAB_P 0x07 -#define SB_P 0x06 -#define STP_P 0x05 -#define EPS_P 0x04 -#define PEN_P 0x03 -#define STB_P 0x02 -#define WLS_P1 0x01 -#define WLS_P0 0x00 - -/* UART_MCR Register */ -#define LOOP_ENA 0x10 -#define LOOP_ENA_P 0x04 - -/* UART_LSR Register */ -#define TEMT 0x40 -#define THRE 0x20 -#define BI 0x10 -#define FE 0x08 -#define PE 0x04 -#define OE 0x02 -#define DR 0x01 - -#define TEMP_P 0x06 -#define THRE_P 0x05 -#define BI_P 0x04 -#define FE_P 0x03 -#define PE_P 0x02 -#define OE_P 0x01 -#define DR_P 0x00 - -/* UART_IER Register */ -#define ELSI 0x04 -#define ETBEI 0x02 -#define ERBFI 0x01 - -#define ELSI_P 0x02 -#define ETBEI_P 0x01 -#define ERBFI_P 0x00 - -/* UART_IIR Register */ -#define STATUS(x) ((x << 1) & 0x06) -#define NINT 0x01 -#define STATUS_P1 0x02 -#define STATUS_P0 0x01 -#define NINT_P 0x00 -#define IIR_TX_READY 0x02 /* UART_THR empty */ -#define IIR_RX_READY 0x04 /* Receive data ready */ -#define IIR_LINE_CHANGE 0x06 /* Receive line status */ -#define IIR_STATUS 0x06 - -/* UART_GCTL Register */ -#define FFE 0x20 -#define FPE 0x10 -#define RPOLC 0x08 -#define TPOLC 0x04 -#define IREN 0x02 -#define UCEN 0x01 - -#define FFE_P 0x05 -#define FPE_P 0x04 -#define RPOLC_P 0x03 -#define TPOLC_P 0x02 -#define IREN_P 0x01 -#define UCEN_P 0x00 - /* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */ /* PPI_CONTROL Masks */ @@ -643,44 +559,6 @@ #define ERR_TYP_P0 0x0E #define ERR_TYP_P1 0x0F -/*/ ****************** PROGRAMMABLE FLAG MASKS ********************* */ - -/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ -#define PF0 0x0001 -#define PF1 0x0002 -#define PF2 0x0004 -#define PF3 0x0008 -#define PF4 0x0010 -#define PF5 0x0020 -#define PF6 0x0040 -#define PF7 0x0080 -#define PF8 0x0100 -#define PF9 0x0200 -#define PF10 0x0400 -#define PF11 0x0800 -#define PF12 0x1000 -#define PF13 0x2000 -#define PF14 0x4000 -#define PF15 0x8000 - -/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ -#define PF0_P 0 -#define PF1_P 1 -#define PF2_P 2 -#define PF3_P 3 -#define PF4_P 4 -#define PF5_P 5 -#define PF6_P 6 -#define PF7_P 7 -#define PF8_P 8 -#define PF9_P 9 -#define PF10_P 10 -#define PF11_P 11 -#define PF12_P 12 -#define PF13_P 13 -#define PF14_P 14 -#define PF15_P 15 - /* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ /* AMGCTL Masks */ diff --git a/arch/blackfin/mach-bf533/include/mach/fio_flag.h b/arch/blackfin/mach-bf533/include/mach/fio_flag.h deleted file mode 100644 index d0bfba0b083b..000000000000 --- a/arch/blackfin/mach-bf533/include/mach/fio_flag.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright 2005-2008 Analog Devices Inc. - * - * Licensed under the GPL-2 or later - */ - -#ifndef _MACH_FIO_FLAG_H -#define _MACH_FIO_FLAG_H - -#include <asm/blackfin.h> -#include <asm/irqflags.h> - -#if ANOMALY_05000311 -#define BFIN_WRITE_FIO_FLAG(name) \ -static inline void bfin_write_FIO_FLAG_##name(unsigned short val) \ -{ \ - unsigned long flags; \ - flags = hard_local_irq_save(); \ - bfin_write16(FIO_FLAG_##name, val); \ - bfin_read_CHIPID(); \ - hard_local_irq_restore(flags); \ -} -BFIN_WRITE_FIO_FLAG(D) -BFIN_WRITE_FIO_FLAG(C) -BFIN_WRITE_FIO_FLAG(S) -BFIN_WRITE_FIO_FLAG(T) - -#define BFIN_READ_FIO_FLAG(name) \ -static inline u16 bfin_read_FIO_FLAG_##name(void) \ -{ \ - unsigned long flags; \ - u16 ret; \ - flags = hard_local_irq_save(); \ - ret = bfin_read16(FIO_FLAG_##name); \ - bfin_read_CHIPID(); \ - hard_local_irq_restore(flags); \ - return ret; \ -} -BFIN_READ_FIO_FLAG(D) -BFIN_READ_FIO_FLAG(C) -BFIN_READ_FIO_FLAG(S) -BFIN_READ_FIO_FLAG(T) - -#else -#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D, val) -#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C, val) -#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S, val) -#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T, val) -#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) -#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) -#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) -#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) -#endif - -#endif /* _MACH_FIO_FLAG_H */ diff --git a/arch/blackfin/mach-bf533/include/mach/gpio.h b/arch/blackfin/mach-bf533/include/mach/gpio.h index e02416db4b00..cce4f8fb3785 100644 --- a/arch/blackfin/mach-bf533/include/mach/gpio.h +++ b/arch/blackfin/mach-bf533/include/mach/gpio.h @@ -28,4 +28,6 @@ #define PORT_F GPIO_PF0 +#include <mach-common/ports-f.h> + #endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/mach-bf533/include/mach/pll.h b/arch/blackfin/mach-bf533/include/mach/pll.h index 169c106d0edb..94cca674d835 100644 --- a/arch/blackfin/mach-bf533/include/mach/pll.h +++ b/arch/blackfin/mach-bf533/include/mach/pll.h @@ -1,57 +1 @@ -/* - * Copyright 2005-2008 Analog Devices Inc. - * - * Licensed under the GPL-2 or later - */ - -#ifndef _MACH_PLL_H -#define _MACH_PLL_H - -#include <asm/blackfin.h> -#include <asm/irqflags.h> - -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_PLL_CTL()) - return; - - flags = hard_local_irq_save(); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - hard_local_irq_restore(flags); -} - -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_VR_CTL()) - return; - - flags = hard_local_irq_save(); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - hard_local_irq_restore(flags); -} - -#endif /* _MACH_PLL_H */ +#include <mach-common/pll.h> |