diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/blackfin/mach-bf537/boards/stamp.c | 3019 |
1 files changed, 0 insertions, 3019 deletions
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c deleted file mode 100644 index 400e6693643e..000000000000 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ /dev/null @@ -1,3019 +0,0 @@ -/* - * Copyright 2004-2009 Analog Devices Inc. - * 2005 National ICT Australia (NICTA) - * Aidan Williams <aidan@nicta.com.au> - * - * Licensed under the GPL-2 or later. - */ - -#include <linux/device.h> -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/plat-ram.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) -#include <linux/usb/isp1362.h> -#endif -#include <linux/i2c.h> -#include <linux/platform_data/adp5588.h> -#include <linux/etherdevice.h> -#include <linux/ata_platform.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/usb/sl811.h> -#include <linux/spi/mmc_spi.h> -#include <linux/leds.h> -#include <linux/input.h> -#include <asm/dma.h> -#include <asm/bfin5xx_spi.h> -#include <asm/reboot.h> -#include <asm/portmux.h> -#include <asm/dpmc.h> -#include <asm/bfin_sport.h> -#ifdef CONFIG_REGULATOR_FIXED_VOLTAGE -#include <linux/regulator/fixed.h> -#endif -#include <linux/regulator/machine.h> -#include <linux/regulator/consumer.h> -#include <linux/regulator/userspace-consumer.h> - -/* - * Name the Board for the /proc/cpuinfo - */ -const char bfin_board_name[] = "ADI BF537-STAMP"; - -/* - * Driver needs to know address, irq and flag pin. - */ - -#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) -#include <linux/usb/isp1760.h> -static struct resource bfin_isp1760_resources[] = { - [0] = { - .start = 0x203C0000, - .end = 0x203C0000 + 0x000fffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct isp1760_platform_data isp1760_priv = { - .is_isp1761 = 0, - .bus_width_16 = 1, - .port1_otg = 0, - .analog_oc = 0, - .dack_polarity_high = 0, - .dreq_polarity_high = 0, -}; - -static struct platform_device bfin_isp1760_device = { - .name = "isp1760", - .id = 0, - .dev = { - .platform_data = &isp1760_priv, - }, - .num_resources = ARRAY_SIZE(bfin_isp1760_resources), - .resource = bfin_isp1760_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) -#include <linux/gpio_keys.h> - -static struct gpio_keys_button bfin_gpio_keys_table[] = { - {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"}, - {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"}, - {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"}, - {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"}, -}; - -static struct gpio_keys_platform_data bfin_gpio_keys_data = { - .buttons = bfin_gpio_keys_table, - .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), -}; - -static struct platform_device bfin_device_gpiokeys = { - .name = "gpio-keys", - .dev = { - .platform_data = &bfin_gpio_keys_data, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) -static struct resource bfin_pcmcia_cf_resources[] = { - { - .start = 0x20310000, /* IO PORT */ - .end = 0x20312000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20311000, /* Attribute Memory */ - .end = 0x20311FFF, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF4, - .end = IRQ_PF4, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, { - .start = 6, /* Card Detect PF6 */ - .end = 6, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pcmcia_cf_device = { - .name = "bfin_cf_pcmcia", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), - .resource = bfin_pcmcia_cf_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) -static struct platform_device rtc_device = { - .name = "rtc-bfin", - .id = -1, -}; -#endif - -#if IS_ENABLED(CONFIG_SMC91X) -#include <linux/smc91x.h> - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - { - .name = "smc91x-regs", - .start = 0x20300300, - .end = 0x20300300 + 16, - .flags = IORESOURCE_MEM, - }, { - - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, - .dev = { - .platform_data = &smc91x_info, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_DM9000) -static struct resource dm9000_resources[] = { - [0] = { - .start = 0x203FB800, - .end = 0x203FB800 + 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x203FB804, - .end = 0x203FB804 + 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_PF9, - .end = IRQ_PF9, - .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), - }, -}; - -static struct platform_device dm9000_device = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(dm9000_resources), - .resource = dm9000_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_USB_SL811_HCD) -static struct resource sl811_hcd_resources[] = { - { - .start = 0x20340000, - .end = 0x20340000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20340004, - .end = 0x20340004, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF4, - .end = IRQ_PF4, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) -void sl811_port_power(struct device *dev, int is_on) -{ - gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); -} -#endif - -static struct sl811_platform_data sl811_priv = { - .potpg = 10, - .power = 250, /* == 500mA */ -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) - .port_power = &sl811_port_power, -#endif -}; - -static struct platform_device sl811_hcd_device = { - .name = "sl811-hcd", - .id = 0, - .dev = { - .platform_data = &sl811_priv, - }, - .num_resources = ARRAY_SIZE(sl811_hcd_resources), - .resource = sl811_hcd_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x20360000, - .end = 0x20360000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20360004, - .end = 0x20360004, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF3, - .end = IRQ_PF3, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_CAN_BFIN) -static unsigned short bfin_can_peripherals[] = { - P_CAN0_RX, P_CAN0_TX, 0 -}; - -static struct resource bfin_can_resources[] = { - { - .start = 0xFFC02A00, - .end = 0xFFC02FFF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_CAN_RX, - .end = IRQ_CAN_RX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_CAN_TX, - .end = IRQ_CAN_TX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_CAN_ERROR, - .end = IRQ_CAN_ERROR, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_can_device = { - .name = "bfin_can", - .num_resources = ARRAY_SIZE(bfin_can_resources), - .resource = bfin_can_resources, - .dev = { - .platform_data = &bfin_can_peripherals, /* Passed to driver */ - }, -}; -#endif - -#if IS_ENABLED(CONFIG_BFIN_MAC) -#include <linux/bfin_mac.h> -static const unsigned short bfin_mac_peripherals[] = P_MII0; - -static struct bfin_phydev_platform_data bfin_phydev_data[] = { - { - .addr = 1, - .irq = PHY_POLL, /* IRQ_MAC_PHYINT */ - }, -}; - -static struct bfin_mii_bus_platform_data bfin_mii_bus_data = { - .phydev_number = 1, - .phydev_data = bfin_phydev_data, - .phy_mode = PHY_INTERFACE_MODE_MII, - .mac_peripherals = bfin_mac_peripherals, -}; - -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", - .dev = { - .platform_data = &bfin_mii_bus_data, - } -}; - -static struct platform_device bfin_mac_device = { - .name = "bfin_mac", - .dev = { - .platform_data = &bfin_mii_bus, - } -}; -#endif - -#if IS_ENABLED(CONFIG_USB_NET2272) -static struct resource net2272_bfin_resources[] = { - { - .start = 0x20300000, - .end = 0x20300000 + 0x100, - .flags = IORESOURCE_MEM, - }, { - .start = 1, - .flags = IORESOURCE_BUS, - }, { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device net2272_bfin_device = { - .name = "net2272", - .id = -1, - .num_resources = ARRAY_SIZE(net2272_bfin_resources), - .resource = net2272_bfin_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) -const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; - -static struct mtd_partition bfin_plat_nand_partitions[] = { - { - .name = "linux kernel(nand)", - .size = 0x400000, - .offset = 0, - }, { - .name = "file system(nand)", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - }, -}; - -#define BFIN_NAND_PLAT_CLE 2 -#define BFIN_NAND_PLAT_ALE 1 -static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd_to_nand(mtd); - - if (cmd == NAND_CMD_NONE) - return; - - if (ctrl & NAND_CLE) - writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE)); - else - writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE)); -} - -#define BFIN_NAND_PLAT_READY GPIO_PF3 -static int bfin_plat_nand_dev_ready(struct mtd_info *mtd) -{ - return gpio_get_value(BFIN_NAND_PLAT_READY); -} - -static struct platform_nand_data bfin_plat_nand_data = { - .chip = { - .nr_chips = 1, - .chip_delay = 30, - .part_probe_types = part_probes, - .partitions = bfin_plat_nand_partitions, - .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), - }, - .ctrl = { - .cmd_ctrl = bfin_plat_nand_cmd_ctrl, - .dev_ready = bfin_plat_nand_dev_ready, - }, -}; - -#define MAX(x, y) (x > y ? x : y) -static struct resource bfin_plat_nand_resources = { - .start = 0x20212000, - .end = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)), - .flags = IORESOURCE_MEM, -}; - -static struct platform_device bfin_async_nand_device = { - .name = "gen_nand", - .id = -1, - .num_resources = 1, - .resource = &bfin_plat_nand_resources, - .dev = { - .platform_data = &bfin_plat_nand_data, - }, -}; - -static void bfin_plat_nand_init(void) -{ - gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat"); - gpio_direction_input(BFIN_NAND_PLAT_READY); -} -#else -static void bfin_plat_nand_init(void) {} -#endif - -#if IS_ENABLED(CONFIG_MTD_PHYSMAP) -static struct mtd_partition stamp_partitions[] = { - { - .name = "bootloader(nor)", - .size = 0x40000, - .offset = 0, - }, { - .name = "linux kernel(nor)", - .size = 0x180000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "file system(nor)", - .size = 0x400000 - 0x40000 - 0x180000 - 0x10000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "MAC Address(nor)", - .size = MTDPART_SIZ_FULL, - .offset = 0x3F0000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct physmap_flash_data stamp_flash_data = { - .width = 2, - .parts = stamp_partitions, - .nr_parts = ARRAY_SIZE(stamp_partitions), -#ifdef CONFIG_ROMKERNEL - .probe_type = "map_rom", -#endif -}; - -static struct resource stamp_flash_resource = { - .start = 0x20000000, - .end = 0x203fffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device stamp_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &stamp_flash_data, - }, - .num_resources = 1, - .resource = &stamp_flash_resource, -}; -#endif - -#if IS_ENABLED(CONFIG_MTD_M25P80) -static struct mtd_partition bfin_spi_flash_partitions[] = { - { - .name = "bootloader(spi)", - .size = 0x00040000, - .offset = 0, - .mask_flags = MTD_CAP_ROM - }, { - .name = "linux kernel(spi)", - .size = 0x180000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "file system(spi)", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; - -static struct flash_platform_data bfin_spi_flash_data = { - .name = "m25p80", - .parts = bfin_spi_flash_partitions, - .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), - /* .type = "m25p64", */ -}; - -/* SPI flash chip (m25p64) */ -static struct bfin5xx_spi_chip spi_flash_chip_info = { - .enable_dma = 0, /* use dma transfer with this chip*/ -}; -#endif - -#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI) -#include <linux/input/ad714x.h> - -static struct ad714x_slider_plat ad7147_spi_slider_plat[] = { - { - .start_stage = 0, - .end_stage = 7, - .max_coord = 128, - }, -}; - -static struct ad714x_button_plat ad7147_spi_button_plat[] = { - { - .keycode = BTN_FORWARD, - .l_mask = 0, - .h_mask = 0x600, - }, - { - .keycode = BTN_LEFT, - .l_mask = 0, - .h_mask = 0x500, - }, - { - .keycode = BTN_MIDDLE, - .l_mask = 0, - .h_mask = 0x800, - }, - { - .keycode = BTN_RIGHT, - .l_mask = 0x100, - .h_mask = 0x400, - }, - { - .keycode = BTN_BACK, - .l_mask = 0x200, - .h_mask = 0x400, - }, -}; -static struct ad714x_platform_data ad7147_spi_platform_data = { - .slider_num = 1, - .button_num = 5, - .slider = ad7147_spi_slider_plat, - .button = ad7147_spi_button_plat, - .stage_cfg_reg = { - {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600}, - {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650}, - {0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650}, - {0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650}, - {0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650}, - {0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650}, - {0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650}, - {0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600}, - {0xFF7B, 0x3FFF, 0x506, 0x2626, 1100, 1100, 1150, 1150}, - {0xFDFE, 0x3FFF, 0x606, 0x2626, 1100, 1100, 1150, 1150}, - {0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300}, - {0xFFEF, 0x1FFF, 0x0, 0x2626, 1100, 1100, 1150, 1150}, - }, - .sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0}, -}; -#endif - -#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C) -#include <linux/input/ad714x.h> -static struct ad714x_button_plat ad7142_i2c_button_plat[] = { - { - .keycode = BTN_1, - .l_mask = 0, - .h_mask = 0x1, - }, - { - .keycode = BTN_2, - .l_mask = 0, - .h_mask = 0x2, - }, - { - .keycode = BTN_3, - .l_mask = 0, - .h_mask = 0x4, - }, - { - .keycode = BTN_4, - .l_mask = 0x0, - .h_mask = 0x8, - }, -}; -static struct ad714x_platform_data ad7142_i2c_platform_data = { - .button_num = 4, - .button = ad7142_i2c_button_plat, - .stage_cfg_reg = { - /* fixme: figure out right setting for all comoponent according - * to hardware feature of EVAL-AD7142EB board */ - {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, - {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, - {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, - {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, - {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, - {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, - {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, - {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, - {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, - {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, - {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, - {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, - }, - .sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0}, -}; -#endif - -#if IS_ENABLED(CONFIG_AD2S90) -static struct bfin5xx_spi_chip ad2s90_spi_chip_info = { - .enable_dma = 0, -}; -#endif - -#if IS_ENABLED(CONFIG_AD2S1200) -static unsigned short ad2s1200_platform_data[] = { - /* used as SAMPLE and RDVEL */ - GPIO_PF5, GPIO_PF6, 0 -}; - -static struct bfin5xx_spi_chip ad2s1200_spi_chip_info = { - .enable_dma = 0, -}; -#endif - -#if IS_ENABLED(CONFIG_AD2S1210) -static unsigned short ad2s1210_platform_data[] = { - /* use as SAMPLE, A0, A1 */ - GPIO_PF7, GPIO_PF8, GPIO_PF9, -# if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT) - /* the RES0 and RES1 pins */ - GPIO_PF4, GPIO_PF5, -# endif - 0, -}; - -static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = { - .enable_dma = 0, -}; -#endif - -#if IS_ENABLED(CONFIG_SENSORS_AD7314) -static struct bfin5xx_spi_chip ad7314_spi_chip_info = { - .enable_dma = 0, -}; -#endif - -#if IS_ENABLED(CONFIG_AD7816) -static unsigned short ad7816_platform_data[] = { - GPIO_PF4, /* rdwr_pin */ - GPIO_PF5, /* convert_pin */ - GPIO_PF7, /* busy_pin */ - 0, -}; - -static struct bfin5xx_spi_chip ad7816_spi_chip_info = { - .enable_dma = 0, -}; -#endif - -#if IS_ENABLED(CONFIG_ADT7310) -static unsigned long adt7310_platform_data[3] = { -/* INT bound temperature alarm event. line 1 */ - IRQ_PG4, IRQF_TRIGGER_LOW, -/* CT bound temperature alarm event irq_flags. line 0 */ - IRQF_TRIGGER_LOW, -}; - -static struct bfin5xx_spi_chip adt7310_spi_chip_info = { - .enable_dma = 0, -}; -#endif - -#if IS_ENABLED(CONFIG_AD7298) -static unsigned short ad7298_platform_data[] = { - GPIO_PF7, /* busy_pin */ - 0, -}; -#endif - -#if IS_ENABLED(CONFIG_ADT7316_SPI) -static unsigned long adt7316_spi_data[2] = { - IRQF_TRIGGER_LOW, /* interrupt flags */ - GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */ -}; - -static struct bfin5xx_spi_chip adt7316_spi_chip_info = { - .enable_dma = 0, -}; -#endif - -#if IS_ENABLED(CONFIG_MMC_SPI) -#define MMC_SPI_CARD_DETECT_INT IRQ_PF5 - -static int bfin_mmc_spi_init(struct device *dev, - irqreturn_t (*detect_int)(int, void *), void *data) -{ - return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int, - IRQF_TRIGGER_FALLING, "mmc-spi-detect", data); -} - -static void bfin_mmc_spi_exit(struct device *dev, void *data) -{ - free_irq(MMC_SPI_CARD_DETECT_INT, data); -} - -static struct mmc_spi_platform_data bfin_mmc_spi_pdata = { - .init = bfin_mmc_spi_init, - .exit = bfin_mmc_spi_exit, - .detect_delay = 100, /* msecs */ -}; - -static struct bfin5xx_spi_chip mmc_spi_chip_info = { - .enable_dma = 0, - .pio_interrupt = 0, -}; -#endif - -#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) -#include <linux/spi/ad7877.h> -static const struct ad7877_platform_data bfin_ad7877_ts_info = { - .model = 7877, - .vref_delay_usecs = 50, /* internal, no capacitor */ - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .pressure_max = 1000, - .pressure_min = 0, - .stopacq_polarity = 1, - .first_conversion_delay = 3, - .acquisition_time = 1, - .averaging = 1, - .pen_down_acc_interval = 1, -}; -#endif - -#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) -#include <linux/platform_data/ad7879.h> -static const struct ad7879_platform_data bfin_ad7879_ts_info = { - .model = 7879, /* Model = AD7879 */ - .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ - .pressure_max = 10000, - .pressure_min = 0, - .first_conversion_delay = 3, /* wait 512us before do a first conversion */ - .acquisition_time = 1, /* 4us acquisition time per sample */ - .median = 2, /* do 8 measurements */ - .averaging = 1, /* take the average of 4 middle samples */ - .pen_down_acc_interval = 255, /* 9.4 ms */ - .gpio_export = 1, /* Export GPIO to gpiolib */ - .gpio_base = -1, /* Dynamic allocation */ -}; -#endif - -#if IS_ENABLED(CONFIG_INPUT_ADXL34X) -#include <linux/input/adxl34x.h> -static const struct adxl34x_platform_data adxl34x_info = { - .x_axis_offset = 0, - .y_axis_offset = 0, - .z_axis_offset = 0, - .tap_threshold = 0x31, - .tap_duration = 0x10, - .tap_latency = 0x60, - .tap_window = 0xF0, - .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN, - .act_axis_control = 0xFF, - .activity_threshold = 5, - .inactivity_threshold = 3, - .inactivity_time = 4, - .free_fall_threshold = 0x7, - .free_fall_time = 0x20, - .data_rate = 0x8, - .data_range = ADXL_FULL_RES, - - .ev_type = EV_ABS, - .ev_code_x = ABS_X, /* EV_REL */ - .ev_code_y = ABS_Y, /* EV_REL */ - .ev_code_z = ABS_Z, /* EV_REL */ - - .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */ - -/* .ev_code_ff = KEY_F,*/ /* EV_KEY */ -/* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */ - .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK, - .fifo_mode = ADXL_FIFO_STREAM, - .orientation_enable = ADXL_EN_ORIENTATION_3D, - .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8, - .divisor_length = ADXL_LP_FILTER_DIVISOR_16, - /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */ - .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C}, -}; -#endif - -#if IS_ENABLED(CONFIG_ENC28J60) -static struct bfin5xx_spi_chip enc28j60_spi_chip_info = { - .enable_dma = 1, -}; -#endif - -#if IS_ENABLED(CONFIG_ADF702X) -#include <linux/spi/adf702x.h> -#define TXREG 0x0160A470 -static const u32 adf7021_regs[] = { - 0x09608FA0, - 0x00575011, - 0x00A7F092, - 0x2B141563, - 0x81F29E94, - 0x00003155, - 0x050A4F66, - 0x00000007, - 0x00000008, - 0x000231E9, - 0x3296354A, - 0x891A2B3B, - 0x00000D9C, - 0x0000000D, - 0x0000000E, - 0x0000000F, -}; - -static struct adf702x_platform_data adf7021_platform_data = { - .regs_base = (void *)SPORT1_TCR1, - .dma_ch_rx = CH_SPORT1_RX, - .dma_ch_tx = CH_SPORT1_TX, - .irq_sport_err = IRQ_SPORT1_ERROR, - .gpio_int_rfs = GPIO_PF8, - .pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI, - P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0}, - .adf702x_model = MODEL_ADF7021, - .adf702x_regs = adf7021_regs, - .tx_reg = TXREG, -}; -static inline void adf702x_mac_init(void) -{ - eth_random_addr(adf7021_platform_data.mac_addr); -} -#else -static inline void adf702x_mac_init(void) {} -#endif - -#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846) -#include <linux/spi/ads7846.h> -static int ads7873_get_pendown_state(void) -{ - return gpio_get_value(GPIO_PF6); -} - -static struct ads7846_platform_data __initdata ad7873_pdata = { - .model = 7873, /* AD7873 */ - .x_max = 0xfff, - .y_max = 0xfff, - .x_plate_ohms = 620, - .debounce_max = 1, - .debounce_rep = 0, - .debounce_tol = (~0), - .get_pendown_state = ads7873_get_pendown_state, -}; -#endif - -#if IS_ENABLED(CONFIG_MTD_DATAFLASH) - -static struct mtd_partition bfin_spi_dataflash_partitions[] = { - { - .name = "bootloader(spi)", - .size = 0x00040000, - .offset = 0, - .mask_flags = MTD_CAP_ROM - }, { - .name = "linux kernel(spi)", - .size = 0x180000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "file system(spi)", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; - -static struct flash_platform_data bfin_spi_dataflash_data = { - .name = "SPI Dataflash", - .parts = bfin_spi_dataflash_partitions, - .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions), -}; - -/* DataFlash chip */ -static struct bfin5xx_spi_chip data_flash_chip_info = { - .enable_dma = 0, /* use dma transfer with this chip*/ -}; -#endif - -#if IS_ENABLED(CONFIG_AD7476) -static struct bfin5xx_spi_chip spi_ad7476_chip_info = { - .enable_dma = 0, /* use dma transfer with this chip*/ -}; -#endif - -static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if IS_ENABLED(CONFIG_MTD_M25P80) - { - /* the modalias must be the same as spi device driver name */ - .modalias = "m25p80", /* Name of spi_driver for this device */ - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ - .platform_data = &bfin_spi_flash_data, - .controller_data = &spi_flash_chip_info, - .mode = SPI_MODE_3, - }, -#endif -#if IS_ENABLED(CONFIG_MTD_DATAFLASH) - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ - .platform_data = &bfin_spi_dataflash_data, - .controller_data = &data_flash_chip_info, - .mode = SPI_MODE_3, - }, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) - { - .modalias = "ad1836", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 4, - .platform_data = "ad1836", /* only includes chip name for the moment */ - .mode = SPI_MODE_3, - }, -#endif - -#ifdef CONFIG_SND_SOC_AD193X_SPI - { - .modalias = "ad193x", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 5, - .mode = SPI_MODE_3, - }, -#endif - -#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X) - { - .modalias = "adav801", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_3, - }, -#endif - -#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI) - { - .modalias = "ad714x_captouch", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .irq = IRQ_PF4, - .bus_num = 0, - .chip_select = 5, - .mode = SPI_MODE_3, - .platform_data = &ad7147_spi_platform_data, - }, -#endif - -#if IS_ENABLED(CONFIG_AD2S90) - { - .modalias = "ad2s90", - .bus_num = 0, - .chip_select = 3, /* change it for your board */ - .mode = SPI_MODE_3, - .platform_data = NULL, - .controller_data = &ad2s90_spi_chip_info, - }, -#endif - -#if IS_ENABLED(CONFIG_AD2S1200) - { - .modalias = "ad2s1200", - .bus_num = 0, - .chip_select = 4, /* CS, change it for your board */ - .platform_data = ad2s1200_platform_data, - .controller_data = &ad2s1200_spi_chip_info, - }, -#endif - -#if IS_ENABLED(CONFIG_AD2S1210) - { - .modalias = "ad2s1210", - .max_speed_hz = 8192000, - .bus_num = 0, - .chip_select = 4, /* CS, change it for your board */ - .platform_data = ad2s1210_platform_data, - .controller_data = &ad2s1210_spi_chip_info, - }, -#endif - -#if IS_ENABLED(CONFIG_SENSORS_AD7314) - { - .modalias = "ad7314", - .max_speed_hz = 1000000, - .bus_num = 0, - .chip_select = 4, /* CS, change it for your board */ - .controller_data = &ad7314_spi_chip_info, - .mode = SPI_MODE_1, - }, -#endif - -#if IS_ENABLED(CONFIG_AD7816) - { - .modalias = "ad7818", - .max_speed_hz = 1000000, - .bus_num = 0, - .chip_select = 4, /* CS, change it for your board */ - .platform_data = ad7816_platform_data, - .controller_data = &ad7816_spi_chip_info, - .mode = SPI_MODE_3, - }, -#endif - -#if IS_ENABLED(CONFIG_ADT7310) - { - .modalias = "adt7310", - .max_speed_hz = 1000000, - .irq = IRQ_PG5, /* CT alarm event. Line 0 */ - .bus_num = 0, - .chip_select = 4, /* CS, change it for your board */ - .platform_data = adt7310_platform_data, - .controller_data = &adt7310_spi_chip_info, - .mode = SPI_MODE_3, - }, -#endif - -#if IS_ENABLED(CONFIG_AD7298) - { - .modalias = "ad7298", - .max_speed_hz = 1000000, - .bus_num = 0, - .chip_select = 4, /* CS, change it for your board */ - .platform_data = ad7298_platform_data, - .mode = SPI_MODE_3, - }, -#endif - -#if IS_ENABLED(CONFIG_ADT7316_SPI) - { - .modalias = "adt7316", - .max_speed_hz = 1000000, - .irq = IRQ_PG5, /* interrupt line */ - .bus_num = 0, - .chip_select = 4, /* CS, change it for your board */ - .platform_data = adt7316_spi_data, - .controller_data = &adt7316_spi_chip_info, - .mode = SPI_MODE_3, - }, -#endif - -#if IS_ENABLED(CONFIG_MMC_SPI) - { - .modalias = "mmc_spi", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 4, - .platform_data = &bfin_mmc_spi_pdata, - .controller_data = &mmc_spi_chip_info, - .mode = SPI_MODE_3, - }, -#endif -#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) - { - .modalias = "ad7877", - .platform_data = &bfin_ad7877_ts_info, - .irq = IRQ_PF6, - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, - }, -#endif -#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) - { - .modalias = "ad7879", - .platform_data = &bfin_ad7879_ts_info, - .irq = IRQ_PF7, - .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, - .mode = SPI_CPHA | SPI_CPOL, - }, -#endif -#if IS_ENABLED(CONFIG_SPI_SPIDEV) - { - .modalias = "spidev", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, - }, -#endif -#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) - { - .modalias = "bfin-lq035q1-spi", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 2, - .mode = SPI_CPHA | SPI_CPOL, - }, -#endif -#if IS_ENABLED(CONFIG_ENC28J60) - { - .modalias = "enc28j60", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ - .irq = IRQ_PF6, - .bus_num = 0, - .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */ - .controller_data = &enc28j60_spi_chip_info, - .mode = SPI_MODE_0, - }, -#endif -#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI) - { - .modalias = "adxl34x", - .platform_data = &adxl34x_info, - .irq = IRQ_PF6, - .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 2, - .mode = SPI_MODE_3, - }, -#endif -#if IS_ENABLED(CONFIG_ADF702X) - { - .modalias = "adf702x", - .max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */ - .platform_data = &adf7021_platform_data, - .mode = SPI_MODE_0, - }, -#endif -#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846) - { - .modalias = "ads7846", - .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .irq = IRQ_PF6, - .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */ - .platform_data = &ad7873_pdata, - .mode = SPI_MODE_0, - }, -#endif -#if IS_ENABLED(CONFIG_AD7476) - { - .modalias = "ad7476", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_ad7476_chip_info, - .mode = SPI_MODE_3, - }, -#endif -#if IS_ENABLED(CONFIG_ADE7753) - { - .modalias = "ade7753", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_1, - }, -#endif -#if IS_ENABLED(CONFIG_ADE7754) - { - .modalias = "ade7754", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_1, - }, -#endif -#if IS_ENABLED(CONFIG_ADE7758) - { - .modalias = "ade7758", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_1, - }, -#endif -#if IS_ENABLED(CONFIG_ADE7759) - { - .modalias = "ade7759", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_1, - }, -#endif -#if IS_ENABLED(CONFIG_ADE7854_SPI) - { - .modalias = "ade7854", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_3, - }, -#endif -#if IS_ENABLED(CONFIG_ADIS16060) - { - .modalias = "adis16060_r", - .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = MAX_CTRL_CS + 1, /* CS for read, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_0, - }, - { - .modalias = "adis16060_w", - .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 2, /* CS for write, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_1, - }, -#endif -#if IS_ENABLED(CONFIG_ADIS16130) - { - .modalias = "adis16130", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, /* CS for read, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_3, - }, -#endif -#if IS_ENABLED(CONFIG_ADIS16201) - { - .modalias = "adis16201", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 5, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_3, - .irq = IRQ_PF4, - }, -#endif -#if IS_ENABLED(CONFIG_ADIS16203) - { - .modalias = "adis16203", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 5, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_3, - .irq = IRQ_PF4, - }, -#endif -#if IS_ENABLED(CONFIG_ADIS16204) - { - .modalias = "adis16204", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 5, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_3, - .irq = IRQ_PF4, - }, -#endif -#if IS_ENABLED(CONFIG_ADIS16209) - { - .modalias = "adis16209", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 5, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_3, - .irq = IRQ_PF4, - }, -#endif -#if IS_ENABLED(CONFIG_ADIS16220) - { - .modalias = "adis16220", - .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 5, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_3, - .irq = IRQ_PF4, - }, -#endif -#if IS_ENABLED(CONFIG_ADIS16240) - { - .modalias = "adis16240", - .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 5, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_3, - .irq = IRQ_PF4, - }, -#endif -#if IS_ENABLED(CONFIG_ADIS16260) - { - .modalias = "adis16260", - .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 5, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_3, - .irq = IRQ_PF4, - }, -#endif -#if IS_ENABLED(CONFIG_ADIS16261) - { - .modalias = "adis16261", - .max_speed_hz = 2500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_3, - }, -#endif -#if IS_ENABLED(CONFIG_ADIS16300) - { - .modalias = "adis16300", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 5, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_3, - .irq = IRQ_PF4, - }, -#endif -#if IS_ENABLED(CONFIG_ADIS16350) - { - .modalias = "adis16364", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 5, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_3, - .irq = IRQ_PF4, - }, -#endif -#if IS_ENABLED(CONFIG_ADIS16400) - { - .modalias = "adis16400", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, /* CS, change it for your board */ - .platform_data = NULL, /* No spi_driver specific config */ - .mode = SPI_MODE_3, - }, -#endif -}; - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) -/* SPI controller data */ -static struct bfin5xx_spi_master bfin_spi0_info = { - .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, - .enable_dma = 1, /* master has the ability to do dma transfer */ - .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, -}; - -/* SPI (0) */ -static struct resource bfin_spi0_resource[] = { - [0] = { - .start = SPI0_REGBASE, - .end = SPI0_REGBASE + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = CH_SPI, - .end = CH_SPI, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = IRQ_SPI, - .end = IRQ_SPI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_spi0_device = { - .name = "bfin-spi", - .id = 0, /* Bus number */ - .num_resources = ARRAY_SIZE(bfin_spi0_resource), - .resource = bfin_spi0_resource, - .dev = { - .platform_data = &bfin_spi0_info, /* Passed to driver */ - }, -}; -#endif /* spi master and devices */ - -#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) - -/* SPORT SPI controller data */ -static struct bfin5xx_spi_master bfin_sport_spi0_info = { - .num_chipselect = MAX_BLACKFIN_GPIOS, - .enable_dma = 0, /* master don't support DMA */ - .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI, - P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0}, -}; - -static struct resource bfin_sport_spi0_resource[] = { - [0] = { - .start = SPORT0_TCR1, - .end = SPORT0_TCR1 + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SPORT0_ERROR, - .end = IRQ_SPORT0_ERROR, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_sport_spi0_device = { - .name = "bfin-sport-spi", - .id = 1, /* Bus number */ - .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource), - .resource = bfin_sport_spi0_resource, - .dev = { - .platform_data = &bfin_sport_spi0_info, /* Passed to driver */ - }, -}; - -static struct bfin5xx_spi_master bfin_sport_spi1_info = { - .num_chipselect = MAX_BLACKFIN_GPIOS, - .enable_dma = 0, /* master don't support DMA */ - .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI, - P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0}, -}; - -static struct resource bfin_sport_spi1_resource[] = { - [0] = { - .start = SPORT1_TCR1, - .end = SPORT1_TCR1 + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SPORT1_ERROR, - .end = IRQ_SPORT1_ERROR, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_sport_spi1_device = { - .name = "bfin-sport-spi", - .id = 2, /* Bus number */ - .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource), - .resource = bfin_sport_spi1_resource, - .dev = { - .platform_data = &bfin_sport_spi1_info, /* Passed to driver */ - }, -}; - -#endif /* sport spi master and devices */ - -#if IS_ENABLED(CONFIG_FB_BF537_LQ035) -static struct platform_device bfin_fb_device = { - .name = "bf537_lq035", -}; -#endif - -#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) -#include <asm/bfin-lq035q1.h> - -static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { - .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, - .ppi_mode = USE_RGB565_16_BIT_PPI, - .use_bl = 0, /* let something else control the LCD Blacklight */ - .gpio_bl = GPIO_PF7, -}; - -static struct resource bfin_lq035q1_resources[] = { - { - .start = IRQ_PPI_ERROR, - .end = IRQ_PPI_ERROR, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_lq035q1_device = { - .name = "bfin-lq035q1", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_lq035q1_resources), - .resource = bfin_lq035q1_resources, - .dev = { - .platform_data = &bfin_lq035q1_data, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) -#include <linux/videodev2.h> -#include <media/blackfin/bfin_capture.h> -#include <media/blackfin/ppi.h> - -static const unsigned short ppi_req[] = { - P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, - P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, - P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, - 0, -}; - -static const struct ppi_info ppi_info = { - .type = PPI_TYPE_PPI, - .dma_ch = CH_PPI, - .irq_err = IRQ_PPI_ERROR, - .base = (void __iomem *)PPI_CONTROL, - .pin_req = ppi_req, -}; - -#if IS_ENABLED(CONFIG_VIDEO_VS6624) -static struct v4l2_input vs6624_inputs[] = { - { - .index = 0, - .name = "Camera", - .type = V4L2_INPUT_TYPE_CAMERA, - .std = V4L2_STD_UNKNOWN, - }, -}; - -static struct bcap_route vs6624_routes[] = { - { - .input = 0, - .output = 0, - }, -}; - -static const unsigned vs6624_ce_pin = GPIO_PF10; - -static struct bfin_capture_config bfin_capture_data = { - .card_name = "BF537", - .inputs = vs6624_inputs, - .num_inputs = ARRAY_SIZE(vs6624_inputs), - .routes = vs6624_routes, - .i2c_adapter_id = 0, - .board_info = { - .type = "vs6624", - .addr = 0x10, - .platform_data = (void *)&vs6624_ce_pin, - }, - .ppi_info = &ppi_info, - .ppi_control = (PACK_EN | DLEN_8 | XFR_TYPE | 0x0020), -}; -#endif - -static struct platform_device bfin_capture_device = { - .name = "bfin_capture", - .dev = { - .platform_data = &bfin_capture_data, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 -static struct resource bfin_uart0_resources[] = { - { - .start = UART0_THR, - .end = UART0_GCTL+2, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_TX, - .end = IRQ_UART0_TX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART0_ERROR, - .end = IRQ_UART0_ERROR, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_TX, - .end = CH_UART0_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX, - .flags = IORESOURCE_DMA, - }, -#ifdef CONFIG_BFIN_UART0_CTSRTS - { /* CTS pin */ - .start = GPIO_PG7, - .end = GPIO_PG7, - .flags = IORESOURCE_IO, - }, - { /* RTS pin */ - .start = GPIO_PG6, - .end = GPIO_PG6, - .flags = IORESOURCE_IO, - }, -#endif -}; - -static unsigned short bfin_uart0_peripherals[] = { - P_UART0_TX, P_UART0_RX, 0 -}; - -static struct platform_device bfin_uart0_device = { - .name = "bfin-uart", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_uart0_resources), - .resource = bfin_uart0_resources, - .dev = { - .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ - }, -}; -#endif -#ifdef CONFIG_SERIAL_BFIN_UART1 -static struct resource bfin_uart1_resources[] = { - { - .start = UART1_THR, - .end = UART1_GCTL+2, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART1_TX, - .end = IRQ_UART1_TX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART1_ERROR, - .end = IRQ_UART1_ERROR, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART1_TX, - .end = CH_UART1_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = CH_UART1_RX, - .end = CH_UART1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static unsigned short bfin_uart1_peripherals[] = { - P_UART1_TX, P_UART1_RX, 0 -}; - -static struct platform_device bfin_uart1_device = { - .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart1_resources), - .resource = bfin_uart1_resources, - .dev = { - .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ - }, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#ifdef CONFIG_BFIN_SIR1 -static struct resource bfin_sir1_resources[] = { - { - .start = 0xFFC02000, - .end = 0xFFC020FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART1_RX, - .end = CH_UART1_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir1_device = { - .name = "bfin_sir", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_sir1_resources), - .resource = bfin_sir1_resources, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) -static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; - -static struct resource bfin_twi0_resource[] = { - [0] = { - .start = TWI0_REGBASE, - .end = TWI0_REGBASE, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TWI, - .end = IRQ_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device i2c_bfin_twi_device = { - .name = "i2c-bfin-twi", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_twi0_resource), - .resource = bfin_twi0_resource, - .dev = { - .platform_data = &bfin_twi0_pins, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588) -static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = { - [0] = KEY_GRAVE, - [1] = KEY_1, - [2] = KEY_2, - [3] = KEY_3, - [4] = KEY_4, - [5] = KEY_5, - [6] = KEY_6, - [7] = KEY_7, - [8] = KEY_8, - [9] = KEY_9, - [10] = KEY_0, - [11] = KEY_MINUS, - [12] = KEY_EQUAL, - [13] = KEY_BACKSLASH, - [15] = KEY_KP0, - [16] = KEY_Q, - [17] = KEY_W, - [18] = KEY_E, - [19] = KEY_R, - [20] = KEY_T, - [21] = KEY_Y, - [22] = KEY_U, - [23] = KEY_I, - [24] = KEY_O, - [25] = KEY_P, - [26] = KEY_LEFTBRACE, - [27] = KEY_RIGHTBRACE, - [29] = KEY_KP1, - [30] = KEY_KP2, - [31] = KEY_KP3, - [32] = KEY_A, - [33] = KEY_S, - [34] = KEY_D, - [35] = KEY_F, - [36] = KEY_G, - [37] = KEY_H, - [38] = KEY_J, - [39] = KEY_K, - [40] = KEY_L, - [41] = KEY_SEMICOLON, - [42] = KEY_APOSTROPHE, - [43] = KEY_BACKSLASH, - [45] = KEY_KP4, - [46] = KEY_KP5, - [47] = KEY_KP6, - [48] = KEY_102ND, - [49] = KEY_Z, - [50] = KEY_X, - [51] = KEY_C, - [52] = KEY_V, - [53] = KEY_B, - [54] = KEY_N, - [55] = KEY_M, - [56] = KEY_COMMA, - [57] = KEY_DOT, - [58] = KEY_SLASH, - [60] = KEY_KPDOT, - [61] = KEY_KP7, - [62] = KEY_KP8, - [63] = KEY_KP9, - [64] = KEY_SPACE, - [65] = KEY_BACKSPACE, - [66] = KEY_TAB, - [67] = KEY_KPENTER, - [68] = KEY_ENTER, - [69] = KEY_ESC, - [70] = KEY_DELETE, - [74] = KEY_KPMINUS, - [76] = KEY_UP, - [77] = KEY_DOWN, - [78] = KEY_RIGHT, - [79] = KEY_LEFT, -}; - -static struct adp5588_kpad_platform_data adp5588_kpad_data = { - .rows = 8, - .cols = 10, - .keymap = adp5588_keymap, - .keymapsize = ARRAY_SIZE(adp5588_keymap), - .repeat = 0, -}; -#endif - -#if IS_ENABLED(CONFIG_PMIC_ADP5520) -#include <linux/mfd/adp5520.h> - - /* - * ADP5520/5501 Backlight Data - */ - -static struct adp5520_backlight_platform_data adp5520_backlight_data = { - .fade_in = ADP5520_FADE_T_1200ms, - .fade_out = ADP5520_FADE_T_1200ms, - .fade_led_law = ADP5520_BL_LAW_LINEAR, - .en_ambl_sens = 1, - .abml_filt = ADP5520_BL_AMBL_FILT_640ms, - .l1_daylight_max = ADP5520_BL_CUR_mA(15), - .l1_daylight_dim = ADP5520_BL_CUR_mA(0), - .l2_office_max = ADP5520_BL_CUR_mA(7), - .l2_office_dim = ADP5520_BL_CUR_mA(0), - .l3_dark_max = ADP5520_BL_CUR_mA(3), - .l3_dark_dim = ADP5520_BL_CUR_mA(0), - .l2_trip = ADP5520_L2_COMP_CURR_uA(700), - .l2_hyst = ADP5520_L2_COMP_CURR_uA(50), - .l3_trip = ADP5520_L3_COMP_CURR_uA(80), - .l3_hyst = ADP5520_L3_COMP_CURR_uA(20), -}; - - /* - * ADP5520/5501 LEDs Data - */ - -static struct led_info adp5520_leds[] = { - { - .name = "adp5520-led1", - .default_trigger = "none", - .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms, - }, -#ifdef ADP5520_EN_ALL_LEDS - { - .name = "adp5520-led2", - .default_trigger = "none", - .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1, - }, - { - .name = "adp5520-led3", - .default_trigger = "none", - .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2, - }, -#endif -}; - -static struct adp5520_leds_platform_data adp5520_leds_data = { - .num_leds = ARRAY_SIZE(adp5520_leds), - .leds = adp5520_leds, - .fade_in = ADP5520_FADE_T_600ms, - .fade_out = ADP5520_FADE_T_600ms, - .led_on_time = ADP5520_LED_ONT_600ms, -}; - - /* - * ADP5520 GPIO Data - */ - -static struct adp5520_gpio_platform_data adp5520_gpio_data = { - .gpio_start = 50, - .gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2, - .gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2, -}; - - /* - * ADP5520 Keypad Data - */ - -static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = { - [ADP5520_KEY(0, 0)] = KEY_GRAVE, - [ADP5520_KEY(0, 1)] = KEY_1, - [ADP5520_KEY(0, 2)] = KEY_2, - [ADP5520_KEY(0, 3)] = KEY_3, - [ADP5520_KEY(1, 0)] = KEY_4, - [ADP5520_KEY(1, 1)] = KEY_5, - [ADP5520_KEY(1, 2)] = KEY_6, - [ADP5520_KEY(1, 3)] = KEY_7, - [ADP5520_KEY(2, 0)] = KEY_8, - [ADP5520_KEY(2, 1)] = KEY_9, - [ADP5520_KEY(2, 2)] = KEY_0, - [ADP5520_KEY(2, 3)] = KEY_MINUS, - [ADP5520_KEY(3, 0)] = KEY_EQUAL, - [ADP5520_KEY(3, 1)] = KEY_BACKSLASH, - [ADP5520_KEY(3, 2)] = KEY_BACKSPACE, - [ADP5520_KEY(3, 3)] = KEY_ENTER, -}; - -static struct adp5520_keys_platform_data adp5520_keys_data = { - .rows_en_mask = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0, - .cols_en_mask = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0, - .keymap = adp5520_keymap, - .keymapsize = ARRAY_SIZE(adp5520_keymap), - .repeat = 0, -}; - - /* - * ADP5520/5501 Multifunction Device Init Data - */ - -static struct adp5520_platform_data adp5520_pdev_data = { - .backlight = &adp5520_backlight_data, - .leds = &adp5520_leds_data, - .gpio = &adp5520_gpio_data, - .keys = &adp5520_keys_data, -}; - -#endif - -#if IS_ENABLED(CONFIG_GPIO_ADP5588) -static struct adp5588_gpio_platform_data adp5588_gpio_data = { - .gpio_start = 50, - .pullup_dis_mask = 0, -}; -#endif - -#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870) -#include <linux/platform_data/adp8870.h> -static struct led_info adp8870_leds[] = { - { - .name = "adp8870-led7", - .default_trigger = "none", - .flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms, - }, -}; - - -static struct adp8870_backlight_platform_data adp8870_pdata = { - .bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 | - ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6, /* 1 = Backlight 0 = Individual LED */ - .pwm_assign = 0, /* 1 = Enables PWM mode */ - - .bl_fade_in = ADP8870_FADE_T_1200ms, /* Backlight Fade-In Timer */ - .bl_fade_out = ADP8870_FADE_T_1200ms, /* Backlight Fade-Out Timer */ - .bl_fade_law = ADP8870_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */ - - .en_ambl_sens = 1, /* 1 = enable ambient light sensor */ - .abml_filt = ADP8870_BL_AMBL_FILT_320ms, /* Light sensor filter time */ - - .l1_daylight_max = ADP8870_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l1_daylight_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l2_bright_max = ADP8870_BL_CUR_mA(14), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l2_bright_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l3_office_max = ADP8870_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l3_office_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l4_indoor_max = ADP8870_BL_CUR_mA(3), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l4_indor_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l5_dark_max = ADP8870_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l5_dark_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - - .l2_trip = ADP8870_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ - .l2_hyst = ADP8870_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ - .l3_trip = ADP8870_L3_COMP_CURR_uA(389), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ - .l3_hyst = ADP8870_L3_COMP_CURR_uA(54), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ - .l4_trip = ADP8870_L4_COMP_CURR_uA(167), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ - .l4_hyst = ADP8870_L4_COMP_CURR_uA(16), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ - .l5_trip = ADP8870_L5_COMP_CURR_uA(43), /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */ - .l5_hyst = ADP8870_L5_COMP_CURR_uA(11), /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */ - - .leds = adp8870_leds, - .num_leds = ARRAY_SIZE(adp8870_leds), - .led_fade_law = ADP8870_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */ - .led_fade_in = ADP8870_FADE_T_600ms, - .led_fade_out = ADP8870_FADE_T_600ms, - .led_on_time = ADP8870_LED_ONT_200ms, -}; -#endif - -#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860) -#include <linux/platform_data/adp8860.h> -static struct led_info adp8860_leds[] = { - { - .name = "adp8860-led7", - .default_trigger = "none", - .flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms, - }, -}; - -static struct adp8860_backlight_platform_data adp8860_pdata = { - .bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 | - ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6, /* 1 = Backlight 0 = Individual LED */ - - .bl_fade_in = ADP8860_FADE_T_1200ms, /* Backlight Fade-In Timer */ - .bl_fade_out = ADP8860_FADE_T_1200ms, /* Backlight Fade-Out Timer */ - .bl_fade_law = ADP8860_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */ - - .en_ambl_sens = 1, /* 1 = enable ambient light sensor */ - .abml_filt = ADP8860_BL_AMBL_FILT_320ms, /* Light sensor filter time */ - - .l1_daylight_max = ADP8860_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l1_daylight_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l2_office_max = ADP8860_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l2_office_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l3_dark_max = ADP8860_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - .l3_dark_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - - .l2_trip = ADP8860_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ - .l2_hyst = ADP8860_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ - .l3_trip = ADP8860_L3_COMP_CURR_uA(43), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */ - .l3_hyst = ADP8860_L3_COMP_CURR_uA(11), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */ - - .leds = adp8860_leds, - .num_leds = ARRAY_SIZE(adp8860_leds), - .led_fade_law = ADP8860_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */ - .led_fade_in = ADP8860_FADE_T_600ms, - .led_fade_out = ADP8860_FADE_T_600ms, - .led_on_time = ADP8860_LED_ONT_200ms, -}; -#endif - -#if IS_ENABLED(CONFIG_REGULATOR_AD5398) -static struct regulator_consumer_supply ad5398_consumer = { - .supply = "current", -}; - -static struct regulator_init_data ad5398_regulator_data = { - .constraints = { - .name = "current range", - .max_uA = 120000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &ad5398_consumer, -}; - -#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER) -static struct platform_device ad5398_virt_consumer_device = { - .name = "reg-virt-consumer", - .id = 0, - .dev = { - .platform_data = "current", /* Passed to driver */ - }, -}; -#endif -#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) -static struct regulator_bulk_data ad5398_bulk_data = { - .supply = "current", -}; - -static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = { - .name = "ad5398", - .num_supplies = 1, - .supplies = &ad5398_bulk_data, -}; - -static struct platform_device ad5398_userspace_consumer_device = { - .name = "reg-userspace-consumer", - .id = 0, - .dev = { - .platform_data = &ad5398_userspace_comsumer_data, - }, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_ADT7410) -/* INT bound temperature alarm event. line 1 */ -static unsigned long adt7410_platform_data[2] = { - IRQ_PG4, IRQF_TRIGGER_LOW, -}; -#endif - -#if IS_ENABLED(CONFIG_ADT7316_I2C) -/* INT bound temperature alarm event. line 1 */ -static unsigned long adt7316_i2c_data[2] = { - IRQF_TRIGGER_LOW, /* interrupt flags */ - GPIO_PF4, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */ -}; -#endif - -static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#ifdef CONFIG_SND_SOC_AD193X_I2C - { - I2C_BOARD_INFO("ad1937", 0x04), - }, -#endif - -#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X) - { - I2C_BOARD_INFO("adav803", 0x10), - }, -#endif - -#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C) - { - I2C_BOARD_INFO("ad7142_captouch", 0x2C), - .irq = IRQ_PG5, - .platform_data = (void *)&ad7142_i2c_platform_data, - }, -#endif - -#if IS_ENABLED(CONFIG_AD7150) - { - I2C_BOARD_INFO("ad7150", 0x48), - .irq = IRQ_PG5, /* fixme: use real interrupt number */ - }, -#endif - -#if IS_ENABLED(CONFIG_AD7152) - { - I2C_BOARD_INFO("ad7152", 0x48), - }, -#endif - -#if IS_ENABLED(CONFIG_AD774X) - { - I2C_BOARD_INFO("ad774x", 0x48), - }, -#endif - -#if IS_ENABLED(CONFIG_ADE7854_I2C) - { - I2C_BOARD_INFO("ade7854", 0x38), - }, -#endif - -#if IS_ENABLED(CONFIG_SENSORS_LM75) - { - I2C_BOARD_INFO("adt75", 0x9), - .irq = IRQ_PG5, - }, -#endif - -#if IS_ENABLED(CONFIG_ADT7410) - { - I2C_BOARD_INFO("adt7410", 0x48), - /* CT critical temperature event. line 0 */ - .irq = IRQ_PG5, - .platform_data = (void *)&adt7410_platform_data, - }, -#endif - -#if IS_ENABLED(CONFIG_AD7291) - { - I2C_BOARD_INFO("ad7291", 0x20), - .irq = IRQ_PG5, - }, -#endif - -#if IS_ENABLED(CONFIG_ADT7316_I2C) - { - I2C_BOARD_INFO("adt7316", 0x48), - .irq = IRQ_PG6, - .platform_data = (void *)&adt7316_i2c_data, - }, -#endif - -#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) - { - I2C_BOARD_INFO("pcf8574_lcd", 0x22), - }, -#endif -#if IS_ENABLED(CONFIG_INPUT_PCF8574) - { - I2C_BOARD_INFO("pcf8574_keypad", 0x27), - .irq = IRQ_PG6, - }, -#endif -#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C) - { - I2C_BOARD_INFO("ad7879", 0x2F), - .irq = IRQ_PG5, - .platform_data = (void *)&bfin_ad7879_ts_info, - }, -#endif -#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588) - { - I2C_BOARD_INFO("adp5588-keys", 0x34), - .irq = IRQ_PG0, - .platform_data = (void *)&adp5588_kpad_data, - }, -#endif -#if IS_ENABLED(CONFIG_PMIC_ADP5520) - { - I2C_BOARD_INFO("pmic-adp5520", 0x32), - .irq = IRQ_PG0, - .platform_data = (void *)&adp5520_pdev_data, - }, -#endif -#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) - { - I2C_BOARD_INFO("adxl34x", 0x53), - .irq = IRQ_PG3, - .platform_data = (void *)&adxl34x_info, - }, -#endif -#if IS_ENABLED(CONFIG_GPIO_ADP5588) - { - I2C_BOARD_INFO("adp5588-gpio", 0x34), - .platform_data = (void *)&adp5588_gpio_data, - }, -#endif -#if IS_ENABLED(CONFIG_FB_BFIN_7393) - { - I2C_BOARD_INFO("bfin-adv7393", 0x2B), - }, -#endif -#if IS_ENABLED(CONFIG_FB_BF537_LQ035) - { - I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F), - }, -#endif -#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870) - { - I2C_BOARD_INFO("adp8870", 0x2B), - .platform_data = (void *)&adp8870_pdata, - }, -#endif -#if IS_ENABLED(CONFIG_SND_SOC_ADAU1371) - { - I2C_BOARD_INFO("adau1371", 0x1A), - }, -#endif -#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761) - { - I2C_BOARD_INFO("adau1761", 0x38), - }, -#endif -#if IS_ENABLED(CONFIG_SND_SOC_ADAU1361) - { - I2C_BOARD_INFO("adau1361", 0x38), - }, -#endif -#if IS_ENABLED(CONFIG_SND_SOC_ADAU1701) - { - I2C_BOARD_INFO("adau1701", 0x34), - }, -#endif -#if IS_ENABLED(CONFIG_AD525X_DPOT) - { - I2C_BOARD_INFO("ad5258", 0x18), - }, -#endif -#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) - { - I2C_BOARD_INFO("ssm2602", 0x1b), - }, -#endif -#if IS_ENABLED(CONFIG_REGULATOR_AD5398) - { - I2C_BOARD_INFO("ad5398", 0xC), - .platform_data = (void *)&ad5398_regulator_data, - }, -#endif -#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860) - { - I2C_BOARD_INFO("adp8860", 0x2A), - .platform_data = (void *)&adp8860_pdata, - }, -#endif -#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373) - { - I2C_BOARD_INFO("adau1373", 0x1A), - }, -#endif -#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) - { - I2C_BOARD_INFO("ad5252", 0x2e), - }, -#endif -}; -#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \ -|| IS_ENABLED(CONFIG_BFIN_SPORT) -unsigned short bfin_sport0_peripherals[] = { - P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, - P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 -}; -#endif -#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) -#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART -static struct resource bfin_sport0_uart_resources[] = { - { - .start = SPORT0_TCR1, - .end = SPORT0_MRCS3+4, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_SPORT0_RX, - .end = IRQ_SPORT0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_SPORT0_ERROR, - .end = IRQ_SPORT0_ERROR, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_sport0_uart_device = { - .name = "bfin-sport-uart", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), - .resource = bfin_sport0_uart_resources, - .dev = { - .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ - }, -}; -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART -static struct resource bfin_sport1_uart_resources[] = { - { - .start = SPORT1_TCR1, - .end = SPORT1_MRCS3+4, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_SPORT1_RX, - .end = IRQ_SPORT1_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_SPORT1_ERROR, - .end = IRQ_SPORT1_ERROR, - .flags = IORESOURCE_IRQ, - }, -}; - -static unsigned short bfin_sport1_peripherals[] = { - P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, - P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0 -}; - -static struct platform_device bfin_sport1_uart_device = { - .name = "bfin-sport-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), - .resource = bfin_sport1_uart_resources, - .dev = { - .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ - }, -}; -#endif -#endif -#if IS_ENABLED(CONFIG_BFIN_SPORT) -static struct resource bfin_sport0_resources[] = { - { - .start = SPORT0_TCR1, - .end = SPORT0_MRCS3+4, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_SPORT0_RX, - .end = IRQ_SPORT0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_SPORT0_TX, - .end = IRQ_SPORT0_TX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_SPORT0_ERROR, - .end = IRQ_SPORT0_ERROR, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_SPORT0_TX, - .end = CH_SPORT0_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = CH_SPORT0_RX, - .end = CH_SPORT0_RX, - .flags = IORESOURCE_DMA, - }, -}; -static struct platform_device bfin_sport0_device = { - .name = "bfin_sport_raw", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sport0_resources), - .resource = bfin_sport0_resources, - .dev = { - .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ - }, -}; -#endif -#if IS_ENABLED(CONFIG_PATA_PLATFORM) -#define CF_IDE_NAND_CARD_USE_HDD_INTERFACE -/* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */ - -#ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE -#define PATA_INT IRQ_PF5 -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; -#elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE) -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 0, -}; -/* CompactFlash Storage Card Memory Mapped Addressing - * /REG = A11 = 1 - */ -static struct resource bfin_pata_resources[] = { - { - .start = 0x20211800, - .end = 0x20211807, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2021180E, /* Device Ctl */ - .end = 0x2021180E, - .flags = IORESOURCE_MEM, - }, -}; -#endif - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - -static const unsigned int cclk_vlev_datasheet[] = -{ - VRPAIR(VLEV_085, 250000000), - VRPAIR(VLEV_090, 376000000), - VRPAIR(VLEV_095, 426000000), - VRPAIR(VLEV_100, 426000000), - VRPAIR(VLEV_105, 476000000), - VRPAIR(VLEV_110, 476000000), - VRPAIR(VLEV_115, 476000000), - VRPAIR(VLEV_120, 500000000), - VRPAIR(VLEV_125, 533000000), - VRPAIR(VLEV_130, 600000000), -}; - -static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { - .tuple_tab = cclk_vlev_datasheet, - .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), - .vr_settling_time = 25 /* us */, -}; - -static struct platform_device bfin_dpmc = { - .name = "bfin dpmc", - .dev = { - .platform_data = &bfin_dmpc_vreg_data, - }, -}; - -#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \ - IS_ENABLED(CONFIG_SND_BF5XX_AC97) - -#define SPORT_REQ(x) \ - [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \ - P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0} - -static const u16 bfin_snd_pin[][7] = { - SPORT_REQ(0), - SPORT_REQ(1), -}; - -static struct bfin_snd_platform_data bfin_snd_data[] = { - { - .pin_req = &bfin_snd_pin[0][0], - }, - { - .pin_req = &bfin_snd_pin[1][0], - }, -}; - -#define BFIN_SND_RES(x) \ - [x] = { \ - { \ - .start = SPORT##x##_TCR1, \ - .end = SPORT##x##_TCR1, \ - .flags = IORESOURCE_MEM \ - }, \ - { \ - .start = CH_SPORT##x##_RX, \ - .end = CH_SPORT##x##_RX, \ - .flags = IORESOURCE_DMA, \ - }, \ - { \ - .start = CH_SPORT##x##_TX, \ - .end = CH_SPORT##x##_TX, \ - .flags = IORESOURCE_DMA, \ - }, \ - { \ - .start = IRQ_SPORT##x##_ERROR, \ - .end = IRQ_SPORT##x##_ERROR, \ - .flags = IORESOURCE_IRQ, \ - } \ - } - -static struct resource bfin_snd_resources[][4] = { - BFIN_SND_RES(0), - BFIN_SND_RES(1), -}; -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) -static struct platform_device bfin_i2s_pcm = { - .name = "bfin-i2s-pcm-audio", - .id = -1, -}; -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) -static struct platform_device bfin_ac97_pcm = { - .name = "bfin-ac97-pcm-audio", - .id = -1, -}; -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) -static const char * const ad1836_link[] = { - "bfin-i2s.0", - "spi0.4", -}; -static struct platform_device bfin_ad1836_machine = { - .name = "bfin-snd-ad1836", - .id = -1, - .dev = { - .platform_data = (void *)ad1836_link, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) -static const unsigned ad73311_gpio[] = { - GPIO_PF4, -}; - -static struct platform_device bfin_ad73311_machine = { - .name = "bfin-snd-ad73311", - .id = 1, - .dev = { - .platform_data = (void *)ad73311_gpio, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_SND_SOC_AD73311) -static struct platform_device bfin_ad73311_codec_device = { - .name = "ad73311", - .id = -1, -}; -#endif - -#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) -static struct platform_device bfin_eval_adav801_device = { - .name = "bfin-eval-adav801", - .id = -1, -}; -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) -static struct platform_device bfin_i2s = { - .name = "bfin-i2s", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), - .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], - .dev = { - .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], - }, -}; -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) -static struct platform_device bfin_ac97 = { - .name = "bfin-ac97", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), - .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], - .dev = { - .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], - }, -}; -#endif - -#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE) -#define REGULATOR_ADP122 "adp122" -#define REGULATOR_ADP122_UV 2500000 - -static struct regulator_consumer_supply adp122_consumers = { - .supply = REGULATOR_ADP122, -}; - -static struct regulator_init_data adp_switch_regulator_data = { - .constraints = { - .name = REGULATOR_ADP122, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .min_uV = REGULATOR_ADP122_UV, - .max_uV = REGULATOR_ADP122_UV, - .min_uA = 0, - .max_uA = 300000, - }, - .num_consumer_supplies = 1, /* only 1 */ - .consumer_supplies = &adp122_consumers, -}; - -static struct fixed_voltage_config adp_switch_pdata = { - .supply_name = REGULATOR_ADP122, - .microvolts = REGULATOR_ADP122_UV, - .gpio = GPIO_PF2, - .enable_high = 1, - .enabled_at_boot = 0, - .init_data = &adp_switch_regulator_data, -}; - -static struct platform_device adp_switch_device = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &adp_switch_pdata, - }, -}; - -#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) -static struct regulator_bulk_data adp122_bulk_data = { - .supply = REGULATOR_ADP122, -}; - -static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = { - .name = REGULATOR_ADP122, - .num_supplies = 1, - .supplies = &adp122_bulk_data, -}; - -static struct platform_device adp122_userspace_consumer_device = { - .name = "reg-userspace-consumer", - .id = 0, - .dev = { - .platform_data = &adp122_userspace_comsumer_data, - }, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER) - -static struct resource iio_gpio_trigger_resources[] = { - [0] = { - .start = IRQ_PF5, - .end = IRQ_PF5, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device iio_gpio_trigger = { - .name = "iio_gpio_trigger", - .num_resources = ARRAY_SIZE(iio_gpio_trigger_resources), - .resource = iio_gpio_trigger_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) -static struct platform_device bf5xx_adau1373_device = { - .name = "bfin-eval-adau1373", -}; -#endif - -#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) -static struct platform_device bf5xx_adau1701_device = { - .name = "bfin-eval-adau1701", -}; -#endif - -static struct platform_device *stamp_devices[] __initdata = { - - &bfin_dpmc, -#if IS_ENABLED(CONFIG_BFIN_SPORT) - &bfin_sport0_device, -#endif -#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) - &bfin_pcmcia_cf_device, -#endif - -#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) - &rtc_device, -#endif - -#if IS_ENABLED(CONFIG_USB_SL811_HCD) - &sl811_hcd_device, -#endif - -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) - &isp1362_hcd_device, -#endif - -#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) - &bfin_isp1760_device, -#endif - -#if IS_ENABLED(CONFIG_SMC91X) - &smc91x_device, -#endif - -#if IS_ENABLED(CONFIG_DM9000) - &dm9000_device, -#endif - -#if IS_ENABLED(CONFIG_CAN_BFIN) - &bfin_can_device, -#endif - -#if IS_ENABLED(CONFIG_BFIN_MAC) - &bfin_mii_bus, - &bfin_mac_device, -#endif - -#if IS_ENABLED(CONFIG_USB_NET2272) - &net2272_bfin_device, -#endif - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) - &bfin_spi0_device, -#endif - -#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) - &bfin_sport_spi0_device, - &bfin_sport_spi1_device, -#endif - -#if IS_ENABLED(CONFIG_FB_BF537_LQ035) - &bfin_fb_device, -#endif - -#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) - &bfin_lq035q1_device, -#endif - -#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) - &bfin_capture_device, -#endif - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART1 - &bfin_uart1_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#ifdef CONFIG_BFIN_SIR1 - &bfin_sir1_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) - &i2c_bfin_twi_device, -#endif - -#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) -#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART - &bfin_sport0_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART - &bfin_sport1_uart_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_PATA_PLATFORM) - &bfin_pata_device, -#endif - -#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) - &bfin_device_gpiokeys, -#endif - -#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) - &bfin_async_nand_device, -#endif - -#if IS_ENABLED(CONFIG_MTD_PHYSMAP) - &stamp_flash_device, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) - &bfin_i2s_pcm, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) - &bfin_ac97_pcm, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) - &bfin_ad1836_machine, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) - &bfin_ad73311_machine, -#endif - -#if IS_ENABLED(CONFIG_SND_SOC_AD73311) - &bfin_ad73311_codec_device, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) - &bfin_i2s, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) - &bfin_ac97, -#endif - -#if IS_ENABLED(CONFIG_REGULATOR_AD5398) -#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER) - &ad5398_virt_consumer_device, -#endif -#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) - &ad5398_userspace_consumer_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE) - &adp_switch_device, -#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) - &adp122_userspace_consumer_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER) - &iio_gpio_trigger, -#endif - -#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) - &bf5xx_adau1373_device, -#endif - -#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) - &bf5xx_adau1701_device, -#endif - -#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) - &bfin_eval_adav801_device, -#endif -}; - -static int __init net2272_init(void) -{ -#if IS_ENABLED(CONFIG_USB_NET2272) - int ret; - - ret = gpio_request(GPIO_PF6, "net2272"); - if (ret) - return ret; - - /* Reset the USB chip */ - gpio_direction_output(GPIO_PF6, 0); - mdelay(2); - gpio_set_value(GPIO_PF6, 1); -#endif - - return 0; -} - -static int __init stamp_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __func__); - bfin_plat_nand_init(); - adf702x_mac_init(); - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); - i2c_register_board_info(0, bfin_i2c_board_info, - ARRAY_SIZE(bfin_i2c_board_info)); - spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - - if (net2272_init()) - pr_warning("unable to configure net2272; it probably won't work\n"); - - return 0; -} - -arch_initcall(stamp_init); - - -static struct platform_device *stamp_early_devices[] __initdata = { -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART1 - &bfin_uart1_device, -#endif -#endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) -#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART - &bfin_sport0_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART - &bfin_sport1_uart_device, -#endif -#endif -}; - -void __init native_machine_early_platform_add_devices(void) -{ - printk(KERN_INFO "register early platform devices\n"); - early_platform_add_devices(stamp_early_devices, - ARRAY_SIZE(stamp_early_devices)); -} - -void native_machine_restart(char *cmd) -{ - /* workaround reboot hang when booting from SPI */ - if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); -} - -/* - * Currently the MAC address is saved in Flash by U-Boot - */ -#define FLASH_MAC 0x203f0000 -int bfin_get_ether_addr(char *addr) -{ - *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC); - *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4); - return 0; -} -EXPORT_SYMBOL(bfin_get_ether_addr); |