diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/blackfin/mach-bf548/Kconfig | 383 |
1 files changed, 0 insertions, 383 deletions
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig deleted file mode 100644 index 71c2a765af1d..000000000000 --- a/arch/blackfin/mach-bf548/Kconfig +++ /dev/null @@ -1,383 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -config BF542 - def_bool y - depends on BF542_std || BF542M -config BF544 - def_bool y - depends on BF544_std || BF544M -config BF547 - def_bool y - depends on BF547_std || BF547M -config BF548 - def_bool y - depends on BF548_std || BF548M -config BF549 - def_bool y - depends on BF549_std || BF549M - -config BF54xM - def_bool y - depends on (BF542M || BF544M || BF547M || BF548M || BF549M) - -config BF54x - def_bool y - depends on (BF542 || BF544 || BF547 || BF548 || BF549) - -if (BF54x) - -source "arch/blackfin/mach-bf548/boards/Kconfig" - -menu "BF548 Specific Configuration" - -config DEB_DMA_URGENT - bool "DMA has priority over core for ext. accesses" - depends on BF54x - default y - help - Treat any DEB1, DEB2 and DEB3 request as Urgent - -config BF548_ATAPI_ALTERNATIVE_PORT - bool "BF548 ATAPI alternative port via GPIO" - help - BF548 ATAPI data and address PINs can be routed through - async address or GPIO port F and G. Select y to route it - to GPIO. - -choice - prompt "UART2 DMA channel selection" - depends on SERIAL_BFIN_UART2 - default UART2_DMA_RX_ON_DMA18 - help - UART2 DMA channel selection - RX -> DMA18 - TX -> DMA19 - or - RX -> DMA13 - TX -> DMA14 - -config UART2_DMA_RX_ON_DMA18 - bool "UART2 DMA RX -> DMA18 TX -> DMA19" - help - UART2 DMA channel assignment - RX -> DMA18 - TX -> DMA19 - use SPORT2 default DMA channel - -config UART2_DMA_RX_ON_DMA13 - bool "UART2 DMA RX -> DMA13 TX -> DMA14" - help - UART2 DMA channel assignment - RX -> DMA13 - TX -> DMA14 - use EPPI1 EPPI2 default DMA channel -endchoice - -choice - prompt "UART3 DMA channel selection" - depends on SERIAL_BFIN_UART3 - default UART3_DMA_RX_ON_DMA20 - help - UART3 DMA channel selection - RX -> DMA20 - TX -> DMA21 - or - RX -> DMA15 - TX -> DMA16 - -config UART3_DMA_RX_ON_DMA20 - bool "UART3 DMA RX -> DMA20 TX -> DMA21" - help - UART3 DMA channel assignment - RX -> DMA20 - TX -> DMA21 - use SPORT3 default DMA channel - -config UART3_DMA_RX_ON_DMA15 - bool "UART3 DMA RX -> DMA15 TX -> DMA16" - help - UART3 DMA channel assignment - RX -> DMA15 - TX -> DMA16 - use PIXC default DMA channel - -endchoice - -comment "Interrupt Priority Assignment" -menu "Priority" - -config IRQ_PLL_WAKEUP - int "IRQ_PLL_WAKEUP" - default 7 -config IRQ_DMAC0_ERR - int "IRQ_DMAC0_ERR" - default 7 -config IRQ_EPPI0_ERR - int "IRQ_EPPI0_ERR" - default 7 -config IRQ_SPORT0_ERR - int "IRQ_SPORT0_ERR" - default 7 -config IRQ_SPORT1_ERR - int "IRQ_SPORT1_ERR" - default 7 -config IRQ_SPI0_ERR - int "IRQ_SPI0_ERR" - default 7 -config IRQ_UART0_ERR - int "IRQ_UART0_ERR" - default 7 -config IRQ_RTC - int "IRQ_RTC" - default 8 -config IRQ_EPPI0 - int "IRQ_EPPI0" - default 8 -config IRQ_SPORT0_RX - int "IRQ_SPORT0_RX" - default 9 -config IRQ_SPORT0_TX - int "IRQ_SPORT0_TX" - default 9 -config IRQ_SPORT1_RX - int "IRQ_SPORT1_RX" - default 9 -config IRQ_SPORT1_TX - int "IRQ_SPORT1_TX" - default 9 -config IRQ_SPI0 - int "IRQ_SPI0" - default 10 -config IRQ_UART0_RX - int "IRQ_UART0_RX" - default 10 -config IRQ_UART0_TX - int "IRQ_UART0_TX" - default 10 -config IRQ_TIMER8 - int "IRQ_TIMER8" - default 11 -config IRQ_TIMER9 - int "IRQ_TIMER9" - default 11 -config IRQ_TIMER10 - int "IRQ_TIMER10" - default 11 -config IRQ_PINT0 - int "IRQ_PINT0" - default 12 -config IRQ_PINT1 - int "IRQ_PINT0" - default 12 -config IRQ_MDMAS0 - int "IRQ_MDMAS0" - default 13 -config IRQ_MDMAS1 - int "IRQ_DMDMAS1" - default 13 -config IRQ_WATCHDOG - int "IRQ_WATCHDOG" - default 13 -config IRQ_DMAC1_ERR - int "IRQ_DMAC1_ERR" - default 7 -config IRQ_SPORT2_ERR - int "IRQ_SPORT2_ERR" - default 7 -config IRQ_SPORT3_ERR - int "IRQ_SPORT3_ERR" - default 7 -config IRQ_MXVR_DATA - int "IRQ MXVR Data" - default 7 -config IRQ_SPI1_ERR - int "IRQ_SPI1_ERR" - default 7 -config IRQ_SPI2_ERR - int "IRQ_SPI2_ERR" - default 7 -config IRQ_UART1_ERR - int "IRQ_UART1_ERR" - default 7 -config IRQ_UART2_ERR - int "IRQ_UART2_ERR" - default 7 -config IRQ_CAN0_ERR - int "IRQ_CAN0_ERR" - default 7 -config IRQ_SPORT2_RX - int "IRQ_SPORT2_RX" - default 9 -config IRQ_SPORT2_TX - int "IRQ_SPORT2_TX" - default 9 -config IRQ_SPORT3_RX - int "IRQ_SPORT3_RX" - default 9 -config IRQ_SPORT3_TX - int "IRQ_SPORT3_TX" - default 9 -config IRQ_EPPI1 - int "IRQ_EPPI1" - default 9 -config IRQ_EPPI2 - int "IRQ_EPPI2" - default 9 -config IRQ_SPI1 - int "IRQ_SPI1" - default 10 -config IRQ_SPI2 - int "IRQ_SPI2" - default 10 -config IRQ_UART1_RX - int "IRQ_UART1_RX" - default 10 -config IRQ_UART1_TX - int "IRQ_UART1_TX" - default 10 -config IRQ_ATAPI_RX - int "IRQ_ATAPI_RX" - default 10 -config IRQ_ATAPI_TX - int "IRQ_ATAPI_TX" - default 10 -config IRQ_TWI0 - int "IRQ_TWI0" - default 11 -config IRQ_TWI1 - int "IRQ_TWI1" - default 11 -config IRQ_CAN0_RX - int "IRQ_CAN_RX" - default 11 -config IRQ_CAN0_TX - int "IRQ_CAN_TX" - default 11 -config IRQ_MDMAS2 - int "IRQ_MDMAS2" - default 13 -config IRQ_MDMAS3 - int "IRQ_DMMAS3" - default 13 -config IRQ_MXVR_ERR - int "IRQ_MXVR_ERR" - default 11 -config IRQ_MXVR_MSG - int "IRQ_MXVR_MSG" - default 11 -config IRQ_MXVR_PKT - int "IRQ_MXVR_PKT" - default 11 -config IRQ_EPPI1_ERR - int "IRQ_EPPI1_ERR" - default 7 -config IRQ_EPPI2_ERR - int "IRQ_EPPI2_ERR" - default 7 -config IRQ_UART3_ERR - int "IRQ_UART3_ERR" - default 7 -config IRQ_HOST_ERR - int "IRQ_HOST_ERR" - default 7 -config IRQ_PIXC_ERR - int "IRQ_PIXC_ERR" - default 7 -config IRQ_NFC_ERR - int "IRQ_NFC_ERR" - default 7 -config IRQ_ATAPI_ERR - int "IRQ_ATAPI_ERR" - default 7 -config IRQ_CAN1_ERR - int "IRQ_CAN1_ERR" - default 7 -config IRQ_HS_DMA_ERR - int "IRQ Handshake DMA Status" - default 7 -config IRQ_PIXC_IN0 - int "IRQ PIXC IN0" - default 8 -config IRQ_PIXC_IN1 - int "IRQ PIXC IN1" - default 8 -config IRQ_PIXC_OUT - int "IRQ PIXC OUT" - default 8 -config IRQ_SDH - int "IRQ SDH" - default 8 -config IRQ_CNT - int "IRQ CNT" - default 8 -config IRQ_KEY - int "IRQ KEY" - default 8 -config IRQ_CAN1_RX - int "IRQ CAN1 RX" - default 11 -config IRQ_CAN1_TX - int "IRQ_CAN1_TX" - default 11 -config IRQ_SDH_MASK0 - int "IRQ_SDH_MASK0" - default 11 -config IRQ_SDH_MASK1 - int "IRQ_SDH_MASK1" - default 11 -config IRQ_USB_INT0 - int "IRQ USB INT0" - default 11 -config IRQ_USB_INT1 - int "IRQ USB INT1" - default 11 -config IRQ_USB_INT2 - int "IRQ USB INT2" - default 11 -config IRQ_USB_DMA - int "IRQ USB DMA" - default 11 -config IRQ_OTPSEC - int "IRQ OPTSEC" - default 11 -config IRQ_TIMER0 - int "IRQ_TIMER0" - default 7 if TICKSOURCE_GPTMR0 - default 8 -config IRQ_TIMER1 - int "IRQ_TIMER1" - default 11 -config IRQ_TIMER2 - int "IRQ_TIMER2" - default 11 -config IRQ_TIMER3 - int "IRQ_TIMER3" - default 11 -config IRQ_TIMER4 - int "IRQ_TIMER4" - default 11 -config IRQ_TIMER5 - int "IRQ_TIMER5" - default 11 -config IRQ_TIMER6 - int "IRQ_TIMER6" - default 11 -config IRQ_TIMER7 - int "IRQ_TIMER7" - default 11 -config IRQ_PINT2 - int "IRQ_PIN2" - default 11 -config IRQ_PINT3 - int "IRQ_PIN3" - default 11 - - help - Enter the priority numbers between 7-13 ONLY. Others are Reserved. - This applies to all the above. It is not recommended to assign the - highest priority number 7 to UART or any other device. - -endmenu - -endmenu - -endif |