diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/blackfin/mach-bf561/secondary.S | 192 |
1 files changed, 0 insertions, 192 deletions
diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S deleted file mode 100644 index 01e5408620ac..000000000000 --- a/arch/blackfin/mach-bf561/secondary.S +++ /dev/null @@ -1,192 +0,0 @@ -/* - * BF561 coreB bootstrap file - * - * Copyright 2007-2009 Analog Devices Inc. - * Philippe Gerum <rpm@xenomai.org> - * - * Licensed under the GPL-2 or later. - */ - -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/blackfin.h> -#include <asm/asm-offsets.h> -#include <asm/trace.h> - -/* - * This code must come first as CoreB is hardcoded (in hardware) - * to start at the beginning of its L1 instruction memory. - */ -.section .l1.text.head - -/* Lay the initial stack into the L1 scratch area of Core B */ -#define INITIAL_STACK (COREB_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) - -ENTRY(_coreb_trampoline_start) - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - - /* Optimization register tricks: keep a base value in the - * reserved P registers so we use the load/store with an - * offset syntax. R0 = [P5 + <constant>]; - * P5 - core MMR base - * R6 - 0 - */ - r6 = 0; - p5.l = 0; - p5.h = hi(COREMMR_BASE); - - /* Zero out registers required by Blackfin ABI */ - - /* Disable circular buffers */ - L0 = r6; - L1 = r6; - L2 = r6; - L3 = r6; - - /* Disable hardware loops in case we were started by 'go' */ - LC0 = r6; - LC1 = r6; - - /* - * Clear ITEST_COMMAND and DTEST_COMMAND registers, - * Leaving these as non-zero can confuse the emulator - */ - [p5 + (DTEST_COMMAND - COREMMR_BASE)] = r6; - [p5 + (ITEST_COMMAND - COREMMR_BASE)] = r6; - CSYNC; - - trace_buffer_init(p0,r0); - - /* Turn off the icache */ - r1 = [p5 + (IMEM_CONTROL - COREMMR_BASE)]; - BITCLR (r1, ENICPLB_P); - [p5 + (IMEM_CONTROL - COREMMR_BASE)] = r1; - SSYNC; - - /* Turn off the dcache */ - r1 = [p5 + (DMEM_CONTROL - COREMMR_BASE)]; - BITCLR (r1, ENDCPLB_P); - [p5 + (DMEM_CONTROL - COREMMR_BASE)] = r1; - SSYNC; - - /* in case of double faults, save a few things */ - p1.l = _initial_pda_coreb; - p1.h = _initial_pda_coreb; - r4 = RETX; -#ifdef CONFIG_DEBUG_DOUBLEFAULT - /* Only save these if we are storing them, - * This happens here, since L1 gets clobbered - * below - */ - GET_PDA(p0, r0); - r0 = [p0 + PDA_DF_RETX]; - r1 = [p0 + PDA_DF_DCPLB]; - r2 = [p0 + PDA_DF_ICPLB]; - r3 = [p0 + PDA_DF_SEQSTAT]; - [p1 + PDA_INIT_DF_RETX] = r0; - [p1 + PDA_INIT_DF_DCPLB] = r1; - [p1 + PDA_INIT_DF_ICPLB] = r2; - [p1 + PDA_INIT_DF_SEQSTAT] = r3; -#endif - [p1 + PDA_INIT_RETX] = r4; - - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - - /* This section keeps the processor in supervisor mode - * during core B startup. Branches to the idle task. - */ - - /* EVT15 = _real_start */ - - p1.l = _coreb_start; - p1.h = _coreb_start; - [p5 + (EVT15 - COREMMR_BASE)] = p1; - csync; - - r0 = EVT_IVG15 (z); - sti r0; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if defined(ANOMALY_05000281) - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(_coreb_trampoline_start) - -#ifdef CONFIG_HOTPLUG_CPU -.section ".text" -ENTRY(_coreb_die) - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - - CLI R2; - SSYNC; - IDLE; - STI R2; - - R0 = IWR_DISABLE_ALL; - P0.H = hi(SYSMMR_BASE); - P0.L = lo(SYSMMR_BASE); - [P0 + (SICB_IWR0 - SYSMMR_BASE)] = R0; - [P0 + (SICB_IWR1 - SYSMMR_BASE)] = R0; - SSYNC; - - p0.h = hi(COREB_L1_CODE_START); - p0.l = lo(COREB_L1_CODE_START); - jump (p0); -ENDPROC(_coreb_die) -#endif - -__INIT -ENTRY(_coreb_start) - [--sp] = reti; - - p0.l = lo(WDOGB_CTL); - p0.h = hi(WDOGB_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* Clear the watchdog. */ - ssync; - - /* - * switch to IDLE stack. - */ - p0.l = _secondary_stack; - p0.h = _secondary_stack; - sp = [p0]; - usp = sp; - fp = sp; -#ifdef CONFIG_HOTPLUG_CPU - p0.l = _hotplug_coreb; - p0.h = _hotplug_coreb; - r0 = [p0]; - cc = BITTST(r0, 0); - if cc jump 3f; -#endif - sp += -12; - call _init_pda - sp += 12; -#ifdef CONFIG_HOTPLUG_CPU -3: -#endif - call _secondary_start_kernel; -.L_exit: - jump.s .L_exit; -ENDPROC(_coreb_start) |