aboutsummaryrefslogtreecommitdiffstats
path: root/arch/cris/arch-v10/kernel/kgdb.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris/arch-v10/kernel/kgdb.c')
-rw-r--r--arch/cris/arch-v10/kernel/kgdb.c89
1 files changed, 36 insertions, 53 deletions
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index 22d846bfc570..ed71ade93a73 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -275,7 +275,7 @@ static char remcomOutBuffer[BUFMAX];
/* Error and warning messages. */
enum error_type
{
- SUCCESS, E01, E02, E03, E04, E05, E06, E07
+ SUCCESS, E01, E02, E03, E04, E05, E06, E07, E08
};
static char *error_message[] =
{
@@ -286,7 +286,8 @@ static char *error_message[] =
"E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.",
"E05 Change register content - P - the register is not implemented..",
"E06 Change memory content - M - internal error.",
- "E07 Change register content - P - the register is not stored on the stack"
+ "E07 Change register content - P - the register is not stored on the stack",
+ "E08 Invalid parameter"
};
/********************************* Register image ****************************/
/* Use the order of registers as defined in "AXIS ETRAX CRIS Programmer's
@@ -351,7 +352,7 @@ char internal_stack[INTERNAL_STACK_SIZE];
breakpoint to be handled. A static breakpoint uses the content of register
BRP as it is whereas a dynamic breakpoint requires subtraction with 2
in order to execute the instruction. The first breakpoint is static. */
-static unsigned char is_dyn_brkp = 0;
+static unsigned char __used is_dyn_brkp;
/********************************* String library ****************************/
/* Single-step over library functions creates trap loops. */
@@ -413,18 +414,6 @@ gdb_cris_strtol (const char *s, char **endptr, int base)
}
/********************************** Packet I/O ******************************/
-/* Returns the integer equivalent of a hexadecimal character. */
-static int
-hex (char ch)
-{
- if ((ch >= 'a') && (ch <= 'f'))
- return (ch - 'a' + 10);
- if ((ch >= '0') && (ch <= '9'))
- return (ch - '0');
- if ((ch >= 'A') && (ch <= 'F'))
- return (ch - 'A' + 10);
- return (-1);
-}
/* Convert the memory, pointed to by mem into hexadecimal representation.
Put the result in buf, and return a pointer to the last character
@@ -455,22 +444,6 @@ mem2hex(char *buf, unsigned char *mem, int count)
return (buf);
}
-/* Convert the array, in hexadecimal representation, pointed to by buf into
- binary representation. Put the result in mem, and return a pointer to
- the character after the last byte written. */
-static unsigned char*
-hex2mem (unsigned char *mem, char *buf, int count)
-{
- int i;
- unsigned char ch;
- for (i = 0; i < count; i++) {
- ch = hex (*buf++) << 4;
- ch = ch + hex (*buf++);
- *mem++ = ch;
- }
- return (mem);
-}
-
/* Put the content of the array, in binary representation, pointed to by buf
into memory pointed to by mem, and return a pointer to the character after
the last byte written.
@@ -524,8 +497,8 @@ getpacket (char *buffer)
buffer[count] = '\0';
if (ch == '#') {
- xmitcsum = hex (getDebugChar ()) << 4;
- xmitcsum += hex (getDebugChar ());
+ xmitcsum = hex_to_bin(getDebugChar()) << 4;
+ xmitcsum += hex_to_bin(getDebugChar());
if (checksum != xmitcsum) {
/* Wrong checksum */
putDebugChar ('-');
@@ -599,7 +572,7 @@ putDebugString (const unsigned char *str, int length)
/********************************* Register image ****************************/
/* Write a value to a specified register in the register image of the current
- thread. Returns status code SUCCESS, E02 or E05. */
+ thread. Returns status code SUCCESS, E02, E05 or E08. */
static int
write_register (int regno, char *val)
{
@@ -608,8 +581,9 @@ write_register (int regno, char *val)
if (regno >= R0 && regno <= PC) {
/* 32-bit register with simple offset. */
- hex2mem ((unsigned char *)current_reg + regno * sizeof(unsigned int),
- val, sizeof(unsigned int));
+ if (hex2bin((unsigned char *)current_reg + regno * sizeof(unsigned int),
+ val, sizeof(unsigned int)))
+ status = E08;
}
else if (regno == P0 || regno == VR || regno == P4 || regno == P8) {
/* Do not support read-only registers. */
@@ -618,13 +592,15 @@ write_register (int regno, char *val)
else if (regno == CCR) {
/* 16 bit register with complex offset. (P4 is read-only, P6 is not implemented,
and P7 (MOF) is 32 bits in ETRAX 100LX. */
- hex2mem ((unsigned char *)&(current_reg->ccr) + (regno-CCR) * sizeof(unsigned short),
- val, sizeof(unsigned short));
+ if (hex2bin((unsigned char *)&(current_reg->ccr) + (regno-CCR) * sizeof(unsigned short),
+ val, sizeof(unsigned short)))
+ status = E08;
}
else if (regno >= MOF && regno <= USP) {
/* 32 bit register with complex offset. (P8 has been taken care of.) */
- hex2mem ((unsigned char *)&(current_reg->ibr) + (regno-IBR) * sizeof(unsigned int),
- val, sizeof(unsigned int));
+ if (hex2bin((unsigned char *)&(current_reg->ibr) + (regno-IBR) * sizeof(unsigned int),
+ val, sizeof(unsigned int)))
+ status = E08;
}
else {
/* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */
@@ -759,9 +735,11 @@ handle_exception (int sigval)
/* Write registers. GXX..XX
Each byte of register data is described by two hex digits.
Success: OK
- Failure: void. */
- hex2mem((char *)&cris_reg, &remcomInBuffer[1], sizeof(registers));
- gdb_cris_strcpy (remcomOutBuffer, "OK");
+ Failure: E08. */
+ if (hex2bin((char *)&cris_reg, &remcomInBuffer[1], sizeof(registers)))
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E08]);
+ else
+ gdb_cris_strcpy (remcomOutBuffer, "OK");
break;
case 'P':
@@ -771,7 +749,7 @@ handle_exception (int sigval)
for each byte in the register (target byte order). P1f=11223344 means
set register 31 to 44332211.
Success: OK
- Failure: E02, E05 */
+ Failure: E02, E05, E08 */
{
char *suffix;
int regno = gdb_cris_strtol (&remcomInBuffer[1], &suffix, 16);
@@ -791,6 +769,10 @@ handle_exception (int sigval)
/* Do not support non-existing registers on the stack. */
gdb_cris_strcpy (remcomOutBuffer, error_message[E07]);
break;
+ case E08:
+ /* Invalid parameter. */
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E08]);
+ break;
default:
/* Valid register number. */
gdb_cris_strcpy (remcomOutBuffer, "OK");
@@ -826,7 +808,7 @@ handle_exception (int sigval)
AA..AA is the start address, LLLL is the number of bytes, and
XX..XX is the hexadecimal data.
Success: OK
- Failure: void. */
+ Failure: E08. */
{
char *lenptr;
char *dataptr;
@@ -835,14 +817,15 @@ handle_exception (int sigval)
int length = gdb_cris_strtol(lenptr+1, &dataptr, 16);
if (*lenptr == ',' && *dataptr == ':') {
if (remcomInBuffer[0] == 'M') {
- hex2mem(addr, dataptr + 1, length);
- }
- else /* X */ {
+ if (hex2bin(addr, dataptr + 1, length))
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E08]);
+ else
+ gdb_cris_strcpy (remcomOutBuffer, "OK");
+ } else /* X */ {
bin2mem(addr, dataptr + 1, length);
+ gdb_cris_strcpy (remcomOutBuffer, "OK");
}
- gdb_cris_strcpy (remcomOutBuffer, "OK");
- }
- else {
+ } else {
gdb_cris_strcpy (remcomOutBuffer, error_message[E06]);
}
}
@@ -970,7 +953,7 @@ asm ("\n"
" move $ibr,[cris_reg+0x4E] ; P9,\n"
" move $irp,[cris_reg+0x52] ; P10,\n"
" move $srp,[cris_reg+0x56] ; P11,\n"
-" move $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n"
+" move $bar,[cris_reg+0x5A] ; P12,\n"
" ; P13, register DCCR already saved\n"
";; Due to the old assembler-versions BRP might not be recognized\n"
" .word 0xE670 ; move brp,r0\n"
@@ -1063,7 +1046,7 @@ asm ("\n"
" move $ibr,[cris_reg+0x4E] ; P9,\n"
" move $irp,[cris_reg+0x52] ; P10,\n"
" move $srp,[cris_reg+0x56] ; P11,\n"
-" move $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n"
+" move $bar,[cris_reg+0x5A] ; P12,\n"
" ; P13, register DCCR already saved\n"
";; Due to the old assembler-versions BRP might not be recognized\n"
" .word 0xE670 ; move brp,r0\n"
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.