1 files changed, 0 insertions, 111 deletions
diff --git a/arch/cris/arch-v32/mach-a3/Kconfig b/arch/cris/arch-v32/mach-a3/Kconfig
deleted file mode 100644
index 7b63755544dd..000000000000
--- a/arch/cris/arch-v32/mach-a3/Kconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if CRIS_MACH_ARTPEC3
-
-menu "Artpec-3 options"
-       depends on CRIS_MACH_ARTPEC3
-
-config ETRAX_DRAM_VIRTUAL_BASE
-	hex
-	default "c0000000"
-
-config ETRAX_L2CACHE
-       bool
-       default y
-
-config ETRAX_SERIAL_PORTS
-       int
-       default 5
-
-config ETRAX_DDR2_MRS
-	hex "DDR2 MRS"
-	default "0"
-
-config ETRAX_DDR2_TIMING
-	hex "DDR2 SDRAM timing"
-	default "0"
-	help
-	  SDRAM timing parameters.
-
-config ETRAX_DDR2_CONFIG
-	hex "DDR2 config"
-	default "0"
-
-config ETRAX_DDR2_LATENCY
-	hex "DDR2 latency"
-	default "0"
-
-config ETRAX_PIO_CE0_CFG
-       hex "PIO CE0 configuration"
-       default "0"
-
-config ETRAX_PIO_CE1_CFG
-       hex "PIO CE1 configuration"
-       default "0"
-
-config ETRAX_PIO_CE2_CFG
-       hex "PIO CE2 configuration"
-       default "0"
-
-config ETRAX_DEF_GIO_PA_OE
-	hex "GIO_PA_OE"
-	default "00000000"
-	help
-	  Configures the direction of general port A bits.  1 is out, 0 is in.
-	  This is often totally different depending on the product used.
-	  There are some guidelines though - if you know that only LED's are
-	  connected to port PA, then they are usually connected to bits 2-4
-	  and you can therefore use 1c.  On other boards which don't have the
-	  LED's at the general ports, these bits are used for all kinds of
-	  stuff.  If you don't know what to use, it is always safe to put all
-	  as inputs, although floating inputs isn't good.
-
-config ETRAX_DEF_GIO_PA_OUT
-	hex "GIO_PA_OUT"
-	default "00000000"
-	help
-	  Configures the initial data for the general port A bits.  Most
-	  products should use 00 here.
-
-config ETRAX_DEF_GIO_PB_OE
-	hex "GIO_PB_OE"
-	default "000000000"
-	help
-	  Configures the direction of general port B bits.  1 is out, 0 is in.
-	  This is often totally different depending on the product used.
-	  There are some guidelines though - if you know that only LED's are
-	  connected to port PA, then they are usually connected to bits 2-4
-	  and you can therefore use 1c.  On other boards which don't have the
-	  LED's at the general ports, these bits are used for all kinds of
-	  stuff.  If you don't know what to use, it is always safe to put all
-	  as inputs, although floating inputs isn't good.
-
-config ETRAX_DEF_GIO_PB_OUT
-	hex "GIO_PB_OUT"
-	default "000000000"
-	help
-	  Configures the initial data for the general port B bits.  Most
-	  products should use 00000 here.
-
-config ETRAX_DEF_GIO_PC_OE
-	hex "GIO_PC_OE"
-	default "00000"
-	help
-	  Configures the direction of general port C bits.  1 is out, 0 is in.
-	  This is often totally different depending on the product used.
-	  There are some guidelines though - if you know that only LED's are
-	  connected to port PA, then they are usually connected to bits 2-4
-	  and you can therefore use 1c.  On other boards which don't have the
-	  LED's at the general ports, these bits are used for all kinds of
-	  stuff.  If you don't know what to use, it is always safe to put all
-	  as inputs, although floating inputs isn't good.
-
-config ETRAX_DEF_GIO_PC_OUT
-	hex "GIO_PC_OUT"
-	default "00000"
-	help
-	  Configures the initial data for the general port C bits.  Most
-	  products should use 00000 here.
-
-endmenu
-
-endif