1 files changed, 301 insertions, 19 deletions

diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S
index cfc683f153b9..d9a260f2efb4 100644
--- a/arch/i386/kernel/entry.S
+++ b/arch/i386/kernel/entry.S
@@ -40,14 +40,15 @@
  * "current" is in register %ebx during any slow entries.
  */
 
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
+#include <asm/irqflags.h>
 #include <asm/errno.h>
 #include <asm/segment.h>
 #include <asm/smp.h>
 #include <asm/page.h>
 #include <asm/desc.h>
+#include <asm/dwarf2.h>
 #include "irq_vectors.h"
 
 #define nr_syscalls ((syscall_table_size)/4)
@@ -76,40 +77,91 @@ NT_MASK		= 0x00004000
 VM_MASK		= 0x00020000
 
 #ifdef CONFIG_PREEMPT
-#define preempt_stop		cli
+#define preempt_stop		cli; TRACE_IRQS_OFF
 #else
 #define preempt_stop
 #define resume_kernel		restore_nocheck
 #endif
 
+.macro TRACE_IRQS_IRET
+#ifdef CONFIG_TRACE_IRQFLAGS
+	testl $IF_MASK,EFLAGS(%esp)     # interrupts off?
+	jz 1f
+	TRACE_IRQS_ON
+1:
+#endif
+.endm
+
+#ifdef CONFIG_VM86
+#define resume_userspace_sig	check_userspace
+#else
+#define resume_userspace_sig	resume_userspace
+#endif
+
 #define SAVE_ALL \
 	cld; \
 	pushl %es; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	/*CFI_REL_OFFSET es, 0;*/\
 	pushl %ds; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	/*CFI_REL_OFFSET ds, 0;*/\
 	pushl %eax; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET eax, 0;\
 	pushl %ebp; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET ebp, 0;\
 	pushl %edi; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET edi, 0;\
 	pushl %esi; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET esi, 0;\
 	pushl %edx; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET edx, 0;\
 	pushl %ecx; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET ecx, 0;\
 	pushl %ebx; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET ebx, 0;\
 	movl $(__USER_DS), %edx; \
 	movl %edx, %ds; \
 	movl %edx, %es;
 
 #define RESTORE_INT_REGS \
 	popl %ebx;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE ebx;\
 	popl %ecx;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE ecx;\
 	popl %edx;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE edx;\
 	popl %esi;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE esi;\
 	popl %edi;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE edi;\
 	popl %ebp;	\
-	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE ebp;\
+	popl %eax;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE eax
 
 #define RESTORE_REGS	\
 	RESTORE_INT_REGS; \
 1:	popl %ds;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	/*CFI_RESTORE ds;*/\
 2:	popl %es;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	/*CFI_RESTORE es;*/\
 .section .fixup,"ax";	\
 3:	movl $0,(%esp);	\
 	jmp 1b;		\
@@ -122,13 +174,43 @@ VM_MASK		= 0x00020000
 	.long 2b,4b;	\
 .previous
 
+#define RING0_INT_FRAME \
+	CFI_STARTPROC simple;\
+	CFI_DEF_CFA esp, 3*4;\
+	/*CFI_OFFSET cs, -2*4;*/\
+	CFI_OFFSET eip, -3*4
+
+#define RING0_EC_FRAME \
+	CFI_STARTPROC simple;\
+	CFI_DEF_CFA esp, 4*4;\
+	/*CFI_OFFSET cs, -2*4;*/\
+	CFI_OFFSET eip, -3*4
+
+#define RING0_PTREGS_FRAME \
+	CFI_STARTPROC simple;\
+	CFI_DEF_CFA esp, OLDESP-EBX;\
+	/*CFI_OFFSET cs, CS-OLDESP;*/\
+	CFI_OFFSET eip, EIP-OLDESP;\
+	/*CFI_OFFSET es, ES-OLDESP;*/\
+	/*CFI_OFFSET ds, DS-OLDESP;*/\
+	CFI_OFFSET eax, EAX-OLDESP;\
+	CFI_OFFSET ebp, EBP-OLDESP;\
+	CFI_OFFSET edi, EDI-OLDESP;\
+	CFI_OFFSET esi, ESI-OLDESP;\
+	CFI_OFFSET edx, EDX-OLDESP;\
+	CFI_OFFSET ecx, ECX-OLDESP;\
+	CFI_OFFSET ebx, EBX-OLDESP
 
 ENTRY(ret_from_fork)
+	CFI_STARTPROC
 	pushl %eax
+	CFI_ADJUST_CFA_OFFSET -4
 	call schedule_tail
 	GET_THREAD_INFO(%ebp)
 	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
 	jmp syscall_exit
+	CFI_ENDPROC
 
 /*
  * Return to user mode is not as complex as all this looks,
@@ -139,10 +221,12 @@ ENTRY(ret_from_fork)
 
 	# userspace resumption stub bypassing syscall exit tracing
 	ALIGN
+	RING0_PTREGS_FRAME
 ret_from_exception:
 	preempt_stop
 ret_from_intr:
 	GET_THREAD_INFO(%ebp)
+check_userspace:
 	movl EFLAGS(%esp), %eax		# mix EFLAGS and CS
 	movb CS(%esp), %al
 	testl $(VM_MASK | 3), %eax
@@ -171,20 +255,42 @@ need_resched:
 	call preempt_schedule_irq
 	jmp need_resched
 #endif
+	CFI_ENDPROC
 
 /* SYSENTER_RETURN points to after the "sysenter" instruction in
    the vsyscall page.  See vsyscall-sysentry.S, which defines the symbol.  */
 
 	# sysenter call handler stub
 ENTRY(sysenter_entry)
+	CFI_STARTPROC simple
+	CFI_DEF_CFA esp, 0
+	CFI_REGISTER esp, ebp
 	movl TSS_sysenter_esp0(%esp),%esp
 sysenter_past_esp:
+	/*
+	 * No need to follow this irqs on/off section: the syscall
+	 * disabled irqs and here we enable it straight after entry:
+	 */
 	sti
 	pushl $(__USER_DS)
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET ss, 0*/
 	pushl %ebp
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET esp, 0
 	pushfl
+	CFI_ADJUST_CFA_OFFSET 4
 	pushl $(__USER_CS)
-	pushl $SYSENTER_RETURN
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET cs, 0*/
+	/*
+	 * Push current_thread_info()->sysenter_return to the stack.
+	 * A tiny bit of offset fixup is necessary - 4*4 means the 4 words
+	 * pushed above; +8 corresponds to copy_thread's esp0 setting.
+	 */
+	pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET eip, 0
 
 /*
  * Load the potential sixth argument from user stack.
@@ -199,6 +305,7 @@ sysenter_past_esp:
 .previous
 
 	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
 	GET_THREAD_INFO(%ebp)
 
@@ -210,6 +317,7 @@ sysenter_past_esp:
 	call *sys_call_table(,%eax,4)
 	movl %eax,EAX(%esp)
 	cli
+	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
 	testw $_TIF_ALLWORK_MASK, %cx
 	jne syscall_exit_work
@@ -217,13 +325,17 @@ sysenter_past_esp:
 	movl EIP(%esp), %edx
 	movl OLDESP(%esp), %ecx
 	xorl %ebp,%ebp
+	TRACE_IRQS_ON
 	sti
 	sysexit
+	CFI_ENDPROC
 
 
 	# system call handler stub
 ENTRY(system_call)
+	RING0_INT_FRAME			# can't unwind into user space anyway
 	pushl %eax			# save orig_eax
+	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
 	GET_THREAD_INFO(%ebp)
 	testl $TF_MASK,EFLAGS(%esp)
@@ -243,6 +355,7 @@ syscall_exit:
 	cli				# make sure we don't miss an interrupt
 					# setting need_resched or sigpending
 					# between sampling and the iret
+	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
 	testw $_TIF_ALLWORK_MASK, %cx	# current->work
 	jne syscall_exit_work
@@ -256,13 +369,18 @@ restore_all:
 	movb CS(%esp), %al
 	andl $(VM_MASK | (4 << 8) | 3), %eax
 	cmpl $((4 << 8) | 3), %eax
+	CFI_REMEMBER_STATE
 	je ldt_ss			# returning to user-space with LDT SS
 restore_nocheck:
+	TRACE_IRQS_IRET
+restore_nocheck_notrace:
 	RESTORE_REGS
 	addl $4, %esp
+	CFI_ADJUST_CFA_OFFSET -4
 1:	iret
 .section .fixup,"ax"
 iret_exc:
+	TRACE_IRQS_ON
 	sti
 	pushl $0			# no error code
 	pushl $do_iret_error
@@ -273,6 +391,7 @@ iret_exc:
 	.long 1b,iret_exc
 .previous
 
+	CFI_RESTORE_STATE
 ldt_ss:
 	larl OLDSS(%esp), %eax
 	jnz restore_nocheck
@@ -285,11 +404,15 @@ ldt_ss:
 	 * CPUs, which we can try to work around to make
 	 * dosemu and wine happy. */
 	subl $8, %esp		# reserve space for switch16 pointer
+	CFI_ADJUST_CFA_OFFSET 8
 	cli
+	TRACE_IRQS_OFF
 	movl %esp, %eax
 	/* Set up the 16bit stack frame with switch32 pointer on top,
 	 * and a switch16 pointer on top of the current frame. */
 	call setup_x86_bogus_stack
+	CFI_ADJUST_CFA_OFFSET -8	# frame has moved
+	TRACE_IRQS_IRET
 	RESTORE_REGS
 	lss 20+4(%esp), %esp	# switch to 16bit stack
 1:	iret
@@ -297,9 +420,11 @@ ldt_ss:
 	.align 4
 	.long 1b,iret_exc
 .previous
+	CFI_ENDPROC
 
 	# perform work that needs to be done immediately before resumption
 	ALIGN
+	RING0_PTREGS_FRAME		# can't unwind into user space anyway
 work_pending:
 	testb $_TIF_NEED_RESCHED, %cl
 	jz work_notifysig
@@ -308,6 +433,7 @@ work_resched:
 	cli				# make sure we don't miss an interrupt
 					# setting need_resched or sigpending
 					# between sampling and the iret
+	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
 	andl $_TIF_WORK_MASK, %ecx	# is there any work to be done other
 					# than syscall tracing?
@@ -323,18 +449,20 @@ work_notifysig:				# deal with pending signals and
 					# vm86-space
 	xorl %edx, %edx
 	call do_notify_resume
-	jmp resume_userspace
+	jmp resume_userspace_sig
 
 	ALIGN
 work_notifysig_v86:
 #ifdef CONFIG_VM86
 	pushl %ecx			# save ti_flags for do_notify_resume
+	CFI_ADJUST_CFA_OFFSET 4
 	call save_v86_state		# %eax contains pt_regs pointer
 	popl %ecx
+	CFI_ADJUST_CFA_OFFSET -4
 	movl %eax, %esp
 	xorl %edx, %edx
 	call do_notify_resume
-	jmp resume_userspace
+	jmp resume_userspace_sig
 #endif
 
 	# perform syscall exit tracing
@@ -357,25 +485,28 @@ syscall_trace_entry:
 syscall_exit_work:
 	testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
 	jz work_pending
+	TRACE_IRQS_ON
 	sti				# could let do_syscall_trace() call
 					# schedule() instead
 	movl %esp, %eax
 	movl $1, %edx
 	call do_syscall_trace
 	jmp resume_userspace
+	CFI_ENDPROC
 
-	ALIGN
+	RING0_INT_FRAME			# can't unwind into user space anyway
 syscall_fault:
 	pushl %eax			# save orig_eax
+	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
 	GET_THREAD_INFO(%ebp)
 	movl $-EFAULT,EAX(%esp)
 	jmp resume_userspace
 
-	ALIGN
 syscall_badsys:
 	movl $-ENOSYS,EAX(%esp)
 	jmp resume_userspace
+	CFI_ENDPROC
 
 #define FIXUP_ESPFIX_STACK \
 	movl %esp, %eax; \
@@ -387,16 +518,21 @@ syscall_badsys:
 	movl %eax, %esp;
 #define UNWIND_ESPFIX_STACK \
 	pushl %eax; \
+	CFI_ADJUST_CFA_OFFSET 4; \
 	movl %ss, %eax; \
 	/* see if on 16bit stack */ \
 	cmpw $__ESPFIX_SS, %ax; \
-	jne 28f; \
-	movl $__KERNEL_DS, %edx; \
-	movl %edx, %ds; \
-	movl %edx, %es; \
+	je 28f; \
+27:	popl %eax; \
+	CFI_ADJUST_CFA_OFFSET -4; \
+.section .fixup,"ax"; \
+28:	movl $__KERNEL_DS, %eax; \
+	movl %eax, %ds; \
+	movl %eax, %es; \
 	/* switch to 32bit stack */ \
-	FIXUP_ESPFIX_STACK \
-28:	popl %eax;
+	FIXUP_ESPFIX_STACK; \
+	jmp 27b; \
+.previous
 
 /*
  * Build the entry stubs and pointer table with
@@ -408,9 +544,14 @@ ENTRY(interrupt)
 
 vector=0
 ENTRY(irq_entries_start)
+	RING0_INT_FRAME
 .rept NR_IRQS
 	ALIGN
-1:	pushl $vector-256
+ .if vector
+	CFI_ADJUST_CFA_OFFSET -4
+ .endif
+1:	pushl $~(vector)
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp common_interrupt
 .data
 	.long 1b
@@ -418,66 +559,111 @@ ENTRY(irq_entries_start)
 vector=vector+1
 .endr
 
+/*
+ * the CPU automatically disables interrupts when executing an IRQ vector,
+ * so IRQ-flags tracing has to follow that:
+ */
 	ALIGN
 common_interrupt:
 	SAVE_ALL
+	TRACE_IRQS_OFF
 	movl %esp,%eax
 	call do_IRQ
 	jmp ret_from_intr
+	CFI_ENDPROC
 
 #define BUILD_INTERRUPT(name, nr)	\
 ENTRY(name)				\
-	pushl $nr-256;			\
-	SAVE_ALL			\
+	RING0_INT_FRAME;		\
+	pushl $~(nr);			\
+	CFI_ADJUST_CFA_OFFSET 4;	\
+	SAVE_ALL;			\
+	TRACE_IRQS_OFF			\
 	movl %esp,%eax;			\
 	call smp_/**/name;		\
-	jmp ret_from_intr;
+	jmp ret_from_intr;		\
+	CFI_ENDPROC
 
 /* The include is where all of the SMP etc. interrupts come from */
 #include "entry_arch.h"
 
 ENTRY(divide_error)
+	RING0_INT_FRAME
 	pushl $0			# no error code
+	CFI_ADJUST_CFA_OFFSET 4
 	pushl $do_divide_error
+	CFI_ADJUST_CFA_OFFSET 4
 	ALIGN
 error_code:
 	pushl %ds
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET ds, 0*/
 	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET eax, 0
 	xorl %eax, %eax
 	pushl %ebp
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ebp, 0
 	pushl %edi
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET edi, 0
 	pushl %esi
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET esi, 0
 	pushl %edx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET edx, 0
 	decl %eax			# eax = -1
 	pushl %ecx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ecx, 0
 	pushl %ebx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ebx, 0
 	cld
 	pushl %es
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET es, 0*/
 	UNWIND_ESPFIX_STACK
 	popl %ecx
+	CFI_ADJUST_CFA_OFFSET -4
+	/*CFI_REGISTER es, ecx*/
 	movl ES(%esp), %edi		# get the function address
 	movl ORIG_EAX(%esp), %edx	# get the error code
 	movl %eax, ORIG_EAX(%esp)
 	movl %ecx, ES(%esp)
+	/*CFI_REL_OFFSET es, ES*/
 	movl $(__USER_DS), %ecx
 	movl %ecx, %ds
 	movl %ecx, %es
 	movl %esp,%eax			# pt_regs pointer
 	call *%edi
 	jmp ret_from_exception
+	CFI_ENDPROC
 
 ENTRY(coprocessor_error)
+	RING0_INT_FRAME
 	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
 	pushl $do_coprocessor_error
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
 
 ENTRY(simd_coprocessor_error)
+	RING0_INT_FRAME
 	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
 	pushl $do_simd_coprocessor_error
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
 
 ENTRY(device_not_available)
+	RING0_INT_FRAME
 	pushl $-1			# mark this as an int
+	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
 	movl %cr0, %eax
 	testl $0x4, %eax		# EM (math emulation bit)
@@ -487,9 +673,12 @@ ENTRY(device_not_available)
 	jmp ret_from_exception
 device_not_available_emulate:
 	pushl $0			# temporary storage for ORIG_EIP
+	CFI_ADJUST_CFA_OFFSET 4
 	call math_emulate
 	addl $4, %esp
+	CFI_ADJUST_CFA_OFFSET -4
 	jmp ret_from_exception
+	CFI_ENDPROC
 
 /*
  * Debug traps and NMI can happen at the one SYSENTER instruction
@@ -514,16 +703,19 @@ label:						\
 	pushl $sysenter_past_esp
 
 KPROBE_ENTRY(debug)
+	RING0_INT_FRAME
 	cmpl $sysenter_entry,(%esp)
 	jne debug_stack_correct
 	FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
 debug_stack_correct:
 	pushl $-1			# mark this as an int
+	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
 	xorl %edx,%edx			# error code 0
 	movl %esp,%eax			# pt_regs pointer
 	call do_debug
 	jmp ret_from_exception
+	CFI_ENDPROC
 	.previous .text
 /*
  * NMI is doubly nasty. It can happen _while_ we're handling
@@ -534,14 +726,18 @@ debug_stack_correct:
  * fault happened on the sysenter path.
  */
 ENTRY(nmi)
+	RING0_INT_FRAME
 	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
 	movl %ss, %eax
 	cmpw $__ESPFIX_SS, %ax
 	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
 	je nmi_16bit_stack
 	cmpl $sysenter_entry,(%esp)
 	je nmi_stack_fixup
 	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
 	movl %esp,%eax
 	/* Do not access memory above the end of our stack page,
 	 * it might not exist.
@@ -549,16 +745,19 @@ ENTRY(nmi)
 	andl $(THREAD_SIZE-1),%eax
 	cmpl $(THREAD_SIZE-20),%eax
 	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
 	jae nmi_stack_correct
 	cmpl $sysenter_entry,12(%esp)
 	je nmi_debug_stack_check
 nmi_stack_correct:
 	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
 	xorl %edx,%edx		# zero error code
 	movl %esp,%eax		# pt_regs pointer
 	call do_nmi
-	jmp restore_all
+	jmp restore_nocheck_notrace
+	CFI_ENDPROC
 
 nmi_stack_fixup:
 	FIX_STACK(12,nmi_stack_correct, 1)
@@ -574,94 +773,177 @@ nmi_debug_stack_check:
 	jmp nmi_stack_correct
 
 nmi_16bit_stack:
+	RING0_INT_FRAME
 	/* create the pointer to lss back */
 	pushl %ss
+	CFI_ADJUST_CFA_OFFSET 4
 	pushl %esp
+	CFI_ADJUST_CFA_OFFSET 4
 	movzwl %sp, %esp
 	addw $4, (%esp)
 	/* copy the iret frame of 12 bytes */
 	.rept 3
 	pushl 16(%esp)
+	CFI_ADJUST_CFA_OFFSET 4
 	.endr
 	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
 	FIXUP_ESPFIX_STACK		# %eax == %esp
+	CFI_ADJUST_CFA_OFFSET -20	# the frame has now moved
 	xorl %edx,%edx			# zero error code
 	call do_nmi
 	RESTORE_REGS
 	lss 12+4(%esp), %esp		# back to 16bit stack
 1:	iret
+	CFI_ENDPROC
 .section __ex_table,"a"
 	.align 4
 	.long 1b,iret_exc
 .previous
 
 KPROBE_ENTRY(int3)
+	RING0_INT_FRAME
 	pushl $-1			# mark this as an int
+	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
 	xorl %edx,%edx		# zero error code
 	movl %esp,%eax		# pt_regs pointer
 	call do_int3
 	jmp ret_from_exception
+	CFI_ENDPROC
 	.previous .text
 
 ENTRY(overflow)
+	RING0_INT_FRAME
 	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
 	pushl $do_overflow
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
 
 ENTRY(bounds)
+	RING0_INT_FRAME
 	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
 	pushl $do_bounds
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
 
 ENTRY(invalid_op)
+	RING0_INT_FRAME
 	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
 	pushl $do_invalid_op
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
 
 ENTRY(coprocessor_segment_overrun)
+	RING0_INT_FRAME
 	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
 	pushl $do_coprocessor_segment_overrun
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
 
 ENTRY(invalid_TSS)
+	RING0_EC_FRAME
 	pushl $do_invalid_TSS
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
 
 ENTRY(segment_not_present)
+	RING0_EC_FRAME
 	pushl $do_segment_not_present
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
 
 ENTRY(stack_segment)
+	RING0_EC_FRAME
 	pushl $do_stack_segment
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
 
 KPROBE_ENTRY(general_protection)
+	RING0_EC_FRAME
 	pushl $do_general_protection
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
 	.previous .text
 
 ENTRY(alignment_check)
+	RING0_EC_FRAME
 	pushl $do_alignment_check
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
 
 KPROBE_ENTRY(page_fault)
+	RING0_EC_FRAME
 	pushl $do_page_fault
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
 	.previous .text
 
 #ifdef CONFIG_X86_MCE
 ENTRY(machine_check)
+	RING0_INT_FRAME
 	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
 	pushl machine_check_vector
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
 #endif
 
 ENTRY(spurious_interrupt_bug)
+	RING0_INT_FRAME
 	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
 	pushl $do_spurious_interrupt_bug
+	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
+	CFI_ENDPROC
+
+#ifdef CONFIG_STACK_UNWIND
+ENTRY(arch_unwind_init_running)
+	CFI_STARTPROC
+	movl	4(%esp), %edx
+	movl	(%esp), %ecx
+	leal	4(%esp), %eax
+	movl	%ebx, EBX(%edx)
+	xorl	%ebx, %ebx
+	movl	%ebx, ECX(%edx)
+	movl	%ebx, EDX(%edx)
+	movl	%esi, ESI(%edx)
+	movl	%edi, EDI(%edx)
+	movl	%ebp, EBP(%edx)
+	movl	%ebx, EAX(%edx)
+	movl	$__USER_DS, DS(%edx)
+	movl	$__USER_DS, ES(%edx)
+	movl	%ebx, ORIG_EAX(%edx)
+	movl	%ecx, EIP(%edx)
+	movl	12(%esp), %ecx
+	movl	$__KERNEL_CS, CS(%edx)
+	movl	%ebx, EFLAGS(%edx)
+	movl	%eax, OLDESP(%edx)
+	movl	8(%esp), %eax
+	movl	%ecx, 8(%esp)
+	movl	EBX(%edx), %ebx
+	movl	$__KERNEL_DS, OLDSS(%edx)
+	jmpl	*%eax
+	CFI_ENDPROC
+ENDPROC(arch_unwind_init_running)
+#endif
 
 .section .rodata,"a"
 #include "syscall_table.S"