1 files changed, 0 insertions, 217 deletions
diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c
deleted file mode 100644
index 17a6fe7166e7..000000000000
--- a/arch/i386/kernel/timers/timer_hpet.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * This code largely moved from arch/i386/kernel/time.c.
- * See comments there for proper credits.
- */
-
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/jiffies.h>
-
-#include <asm/timer.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-#include "io_ports.h"
-#include "mach_timer.h"
-#include <asm/hpet.h>
-
-static unsigned long hpet_usec_quotient __read_mostly;	/* convert hpet clks to usec */
-static unsigned long tsc_hpet_quotient __read_mostly;	/* convert tsc to hpet clks */
-static unsigned long hpet_last; 	/* hpet counter value at last tick*/
-static unsigned long last_tsc_low;	/* lsb 32 bits of Time Stamp Counter */
-static unsigned long last_tsc_high; 	/* msb 32 bits of Time Stamp Counter */
-static unsigned long long monotonic_base;
-static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
-
-/* convert from cycles(64bits) => nanoseconds (64bits)
- *  basic equation:
- *		ns = cycles / (freq / ns_per_sec)
- *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_khz * 10^3))
- *		ns = cycles * (10^6 / cpu_khz)
- *
- *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^6 * SC / cpu_khz) / SC
- *		ns = cycles * cyc2ns_scale / SC
- *
- *	And since SC is a constant power of two, we can convert the div
- *  into a shift.
- *
- *  We can use khz divisor instead of mhz to keep a better percision, since
- *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
- *  (mathieu.desnoyers@polymtl.ca)
- *
- *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
- */
-static unsigned long cyc2ns_scale __read_mostly;
-#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
-
-static inline void set_cyc2ns_scale(unsigned long cpu_khz)
-{
-	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
-}
-
-static inline unsigned long long cycles_2_ns(unsigned long long cyc)
-{
-	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
-}
-
-static unsigned long long monotonic_clock_hpet(void)
-{
-	unsigned long long last_offset, this_offset, base;
-	unsigned seq;
-
-	/* atomically read monotonic base & last_offset */
-	do {
-		seq = read_seqbegin(&monotonic_lock);
-		last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
-		base = monotonic_base;
-	} while (read_seqretry(&monotonic_lock, seq));
-
-	/* Read the Time Stamp Counter */
-	rdtscll(this_offset);
-
-	/* return the value in ns */
-	return base + cycles_2_ns(this_offset - last_offset);
-}
-
-static unsigned long get_offset_hpet(void)
-{
-	register unsigned long eax, edx;
-
-	eax = hpet_readl(HPET_COUNTER);
-	eax -= hpet_last;	/* hpet delta */
-	eax = min(hpet_tick, eax);
-	/*
-         * Time offset = (hpet delta) * ( usecs per HPET clock )
-	 *             = (hpet delta) * ( usecs per tick / HPET clocks per tick)
-	 *             = (hpet delta) * ( hpet_usec_quotient ) / (2^32)
-	 *
-	 * Where,
-	 * hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick
-	 *
-	 * Using a mull instead of a divl saves some cycles in critical path.
-         */
-	ASM_MUL64_REG(eax, edx, hpet_usec_quotient, eax);
-
-	/* our adjusted time offset in microseconds */
-	return edx;
-}
-
-static void mark_offset_hpet(void)
-{
-	unsigned long long this_offset, last_offset;
-	unsigned long offset;
-
-	write_seqlock(&monotonic_lock);
-	last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
-	rdtsc(last_tsc_low, last_tsc_high);
-
-	if (hpet_use_timer)
-		offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
-	else
-		offset = hpet_readl(HPET_COUNTER);
-	if (unlikely(((offset - hpet_last) >= (2*hpet_tick)) && (hpet_last != 0))) {
-		int lost_ticks = ((offset - hpet_last) / hpet_tick) - 1;
-		jiffies_64 += lost_ticks;
-	}
-	hpet_last = offset;
-
-	/* update the monotonic base value */
-	this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
-	monotonic_base += cycles_2_ns(this_offset - last_offset);
-	write_sequnlock(&monotonic_lock);
-}
-
-static void delay_hpet(unsigned long loops)
-{
-	unsigned long hpet_start, hpet_end;
-	unsigned long eax;
-
-	/* loops is the number of cpu cycles. Convert it to hpet clocks */
-	ASM_MUL64_REG(eax, loops, tsc_hpet_quotient, loops);
-
-	hpet_start = hpet_readl(HPET_COUNTER);
-	do {
-		rep_nop();
-		hpet_end = hpet_readl(HPET_COUNTER);
-	} while ((hpet_end - hpet_start) < (loops));
-}
-
-static struct timer_opts timer_hpet;
-
-static int __init init_hpet(char* override)
-{
-	unsigned long result, remain;
-
-	/* check clock override */
-	if (override[0] && strncmp(override,"hpet",4))
-		return -ENODEV;
-
-	if (!is_hpet_enabled())
-		return -ENODEV;
-
-	printk("Using HPET for gettimeofday\n");
-	if (cpu_has_tsc) {
-		unsigned long tsc_quotient = calibrate_tsc_hpet(&tsc_hpet_quotient);
-		if (tsc_quotient) {
-			/* report CPU clock rate in Hz.
-			 * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =
-			 * clock/second. Our precision is about 100 ppm.
-			 */
-			{	unsigned long eax=0, edx=1000;
-				ASM_DIV64_REG(cpu_khz, edx, tsc_quotient,
-						eax, edx);
-				printk("Detected %u.%03u MHz processor.\n",
-					cpu_khz / 1000, cpu_khz % 1000);
-			}
-			set_cyc2ns_scale(cpu_khz);
-		}
-		/* set this only when cpu_has_tsc */
-		timer_hpet.read_timer = read_timer_tsc;
-	}
-
-	/*
-	 * Math to calculate hpet to usec multiplier
-	 * Look for the comments at get_offset_hpet()
-	 */
-	ASM_DIV64_REG(result, remain, hpet_tick, 0, KERNEL_TICK_USEC);
-	if (remain > (hpet_tick >> 1))
-		result++; /* rounding the result */
-	hpet_usec_quotient = result;
-
-	return 0;
-}
-
-static int hpet_resume(void)
-{
-	write_seqlock(&monotonic_lock);
-	/* Assume this is the last mark offset time */
-	rdtsc(last_tsc_low, last_tsc_high);
-
-	if (hpet_use_timer)
-		hpet_last = hpet_readl(HPET_T0_CMP) - hpet_tick;
-	else
-		hpet_last = hpet_readl(HPET_COUNTER);
-	write_sequnlock(&monotonic_lock);
-	return 0;
-}
-/************************************************************/
-
-/* tsc timer_opts struct */
-static struct timer_opts timer_hpet __read_mostly = {
-	.name = 		"hpet",
-	.mark_offset =		mark_offset_hpet,
-	.get_offset =		get_offset_hpet,
-	.monotonic_clock =	monotonic_clock_hpet,
-	.delay = 		delay_hpet,
-	.resume	=		hpet_resume,
-};
-
-struct init_timer_opts __initdata timer_hpet_init = {
-	.init =	init_hpet,
-	.opts = &timer_hpet,
-};