aboutsummaryrefslogtreecommitdiffstats
path: root/arch/i386/kernel/timers/timer_tsc.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--arch/i386/kernel/timers/timer_tsc.c617
1 files changed, 0 insertions, 617 deletions
diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
deleted file mode 100644
index f1187ddb0d0f..000000000000
--- a/arch/i386/kernel/timers/timer_tsc.c
+++ /dev/null
@@ -1,617 +0,0 @@
-/*
- * This code largely moved from arch/i386/kernel/time.c.
- * See comments there for proper credits.
- *
- * 2004-06-25 Jesper Juhl
- * moved mark_offset_tsc below cpufreq_delayed_get to avoid gcc 3.4
- * failing to inline.
- */
-
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/string.h>
-#include <linux/jiffies.h>
-
-#include <asm/timer.h>
-#include <asm/io.h>
-/* processor.h for distable_tsc flag */
-#include <asm/processor.h>
-
-#include "io_ports.h"
-#include "mach_timer.h"
-
-#include <asm/hpet.h>
-#include <asm/i8253.h>
-
-#ifdef CONFIG_HPET_TIMER
-static unsigned long hpet_usec_quotient;
-static unsigned long hpet_last;
-static struct timer_opts timer_tsc;
-#endif
-
-static inline void cpufreq_delayed_get(void);
-
-int tsc_disable __devinitdata = 0;
-
-static int use_tsc;
-/* Number of usecs that the last interrupt was delayed */
-static int delay_at_last_interrupt;
-
-static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
-static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */
-static unsigned long long monotonic_base;
-static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
-
-/* Avoid compensating for lost ticks before TSCs are synched */
-static int detect_lost_ticks;
-static int __init start_lost_tick_compensation(void)
-{
- detect_lost_ticks = 1;
- return 0;
-}
-late_initcall(start_lost_tick_compensation);
-
-/* convert from cycles(64bits) => nanoseconds (64bits)
- * basic equation:
- * ns = cycles / (freq / ns_per_sec)
- * ns = cycles * (ns_per_sec / freq)
- * ns = cycles * (10^9 / (cpu_khz * 10^3))
- * ns = cycles * (10^6 / cpu_khz)
- *
- * Then we use scaling math (suggested by george@mvista.com) to get:
- * ns = cycles * (10^6 * SC / cpu_khz) / SC
- * ns = cycles * cyc2ns_scale / SC
- *
- * And since SC is a constant power of two, we can convert the div
- * into a shift.
- *
- * We can use khz divisor instead of mhz to keep a better percision, since
- * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
- * (mathieu.desnoyers@polymtl.ca)
- *
- * -johnstul@us.ibm.com "math is hard, lets go shopping!"
- */
-static unsigned long cyc2ns_scale __read_mostly;
-#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
-
-static inline void set_cyc2ns_scale(unsigned long cpu_khz)
-{
- cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
-}
-
-static inline unsigned long long cycles_2_ns(unsigned long long cyc)
-{
- return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
-}
-
-static int count2; /* counter for mark_offset_tsc() */
-
-/* Cached *multiplier* to convert TSC counts to microseconds.
- * (see the equation below).
- * Equal to 2^32 * (1 / (clocks per usec) ).
- * Initialized in time_init.
- */
-static unsigned long fast_gettimeoffset_quotient;
-
-static unsigned long get_offset_tsc(void)
-{
- register unsigned long eax, edx;
-
- /* Read the Time Stamp Counter */
-
- rdtsc(eax,edx);
-
- /* .. relative to previous jiffy (32 bits is enough) */
- eax -= last_tsc_low; /* tsc_low delta */
-
- /*
- * Time offset = (tsc_low delta) * fast_gettimeoffset_quotient
- * = (tsc_low delta) * (usecs_per_clock)
- * = (tsc_low delta) * (usecs_per_jiffy / clocks_per_jiffy)
- *
- * Using a mull instead of a divl saves up to 31 clock cycles
- * in the critical path.
- */
-
- __asm__("mull %2"
- :"=a" (eax), "=d" (edx)
- :"rm" (fast_gettimeoffset_quotient),
- "0" (eax));
-
- /* our adjusted time offset in microseconds */
- return delay_at_last_interrupt + edx;
-}
-
-static unsigned long long monotonic_clock_tsc(void)
-{
- unsigned long long last_offset, this_offset, base;
- unsigned seq;
-
- /* atomically read monotonic base & last_offset */
- do {
- seq = read_seqbegin(&monotonic_lock);
- last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
- base = monotonic_base;
- } while (read_seqretry(&monotonic_lock, seq));
-
- /* Read the Time Stamp Counter */
- rdtscll(this_offset);
-
- /* return the value in ns */
- return base + cycles_2_ns(this_offset - last_offset);
-}
-
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
- unsigned long long this_offset;
-
- /*
- * In the NUMA case we dont use the TSC as they are not
- * synchronized across all CPUs.
- */
-#ifndef CONFIG_NUMA
- if (!use_tsc)
-#endif
- /* no locking but a rare wrong value is not a big deal */
- return jiffies_64 * (1000000000 / HZ);
-
- /* Read the Time Stamp Counter */
- rdtscll(this_offset);
-
- /* return the value in ns */
- return cycles_2_ns(this_offset);
-}
-
-static void delay_tsc(unsigned long loops)
-{
- unsigned long bclock, now;
-
- rdtscl(bclock);
- do
- {
- rep_nop();
- rdtscl(now);
- } while ((now-bclock) < loops);
-}
-
-#ifdef CONFIG_HPET_TIMER
-static void mark_offset_tsc_hpet(void)
-{
- unsigned long long this_offset, last_offset;
- unsigned long offset, temp, hpet_current;
-
- write_seqlock(&monotonic_lock);
- last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
- /*
- * It is important that these two operations happen almost at
- * the same time. We do the RDTSC stuff first, since it's
- * faster. To avoid any inconsistencies, we need interrupts
- * disabled locally.
- */
- /*
- * Interrupts are just disabled locally since the timer irq
- * has the SA_INTERRUPT flag set. -arca
- */
- /* read Pentium cycle counter */
-
- hpet_current = hpet_readl(HPET_COUNTER);
- rdtsc(last_tsc_low, last_tsc_high);
-
- /* lost tick compensation */
- offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
- if (unlikely(((offset - hpet_last) > hpet_tick) && (hpet_last != 0))
- && detect_lost_ticks) {
- int lost_ticks = (offset - hpet_last) / hpet_tick;
- jiffies_64 += lost_ticks;
- }
- hpet_last = hpet_current;
-
- /* update the monotonic base value */
- this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
- monotonic_base += cycles_2_ns(this_offset - last_offset);
- write_sequnlock(&monotonic_lock);
-
- /* calculate delay_at_last_interrupt */
- /*
- * Time offset = (hpet delta) * ( usecs per HPET clock )
- * = (hpet delta) * ( usecs per tick / HPET clocks per tick)
- * = (hpet delta) * ( hpet_usec_quotient ) / (2^32)
- * Where,
- * hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick
- */
- delay_at_last_interrupt = hpet_current - offset;
- ASM_MUL64_REG(temp, delay_at_last_interrupt,
- hpet_usec_quotient, delay_at_last_interrupt);
-}
-#endif
-
-
-#ifdef CONFIG_CPU_FREQ
-#include <linux/workqueue.h>
-
-static unsigned int cpufreq_delayed_issched = 0;
-static unsigned int cpufreq_init = 0;
-static struct work_struct cpufreq_delayed_get_work;
-
-static void handle_cpufreq_delayed_get(void *v)
-{
- unsigned int cpu;
- for_each_online_cpu(cpu) {
- cpufreq_get(cpu);
- }
- cpufreq_delayed_issched = 0;
-}
-
-/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries
- * to verify the CPU frequency the timing core thinks the CPU is running
- * at is still correct.
- */
-static inline void cpufreq_delayed_get(void)
-{
- if (cpufreq_init && !cpufreq_delayed_issched) {
- cpufreq_delayed_issched = 1;
- printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n");
- schedule_work(&cpufreq_delayed_get_work);
- }
-}
-
-/* If the CPU frequency is scaled, TSC-based delays will need a different
- * loops_per_jiffy value to function properly.
- */
-
-static unsigned int ref_freq = 0;
-static unsigned long loops_per_jiffy_ref = 0;
-
-#ifndef CONFIG_SMP
-static unsigned long fast_gettimeoffset_ref = 0;
-static unsigned int cpu_khz_ref = 0;
-#endif
-
-static int
-time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
- void *data)
-{
- struct cpufreq_freqs *freq = data;
-
- if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE)
- write_seqlock_irq(&xtime_lock);
- if (!ref_freq) {
- if (!freq->old){
- ref_freq = freq->new;
- goto end;
- }
- ref_freq = freq->old;
- loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy;
-#ifndef CONFIG_SMP
- fast_gettimeoffset_ref = fast_gettimeoffset_quotient;
- cpu_khz_ref = cpu_khz;
-#endif
- }
-
- if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) ||
- (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
- (val == CPUFREQ_RESUMECHANGE)) {
- if (!(freq->flags & CPUFREQ_CONST_LOOPS))
- cpu_data[freq->cpu].loops_per_jiffy = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
-#ifndef CONFIG_SMP
- if (cpu_khz)
- cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new);
- if (use_tsc) {
- if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
- fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq);
- set_cyc2ns_scale(cpu_khz);
- }
- }
-#endif
- }
-
-end:
- if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE)
- write_sequnlock_irq(&xtime_lock);
-
- return 0;
-}
-
-static struct notifier_block time_cpufreq_notifier_block = {
- .notifier_call = time_cpufreq_notifier
-};
-
-
-static int __init cpufreq_tsc(void)
-{
- int ret;
- INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL);
- ret = cpufreq_register_notifier(&time_cpufreq_notifier_block,
- CPUFREQ_TRANSITION_NOTIFIER);
- if (!ret)
- cpufreq_init = 1;
- return ret;
-}
-core_initcall(cpufreq_tsc);
-
-#else /* CONFIG_CPU_FREQ */
-static inline void cpufreq_delayed_get(void) { return; }
-#endif
-
-int recalibrate_cpu_khz(void)
-{
-#ifndef CONFIG_SMP
- unsigned int cpu_khz_old = cpu_khz;
-
- if (cpu_has_tsc) {
- local_irq_disable();
- init_cpu_khz();
- local_irq_enable();
- cpu_data[0].loops_per_jiffy =
- cpufreq_scale(cpu_data[0].loops_per_jiffy,
- cpu_khz_old,
- cpu_khz);
- return 0;
- } else
- return -ENODEV;
-#else
- return -ENODEV;
-#endif
-}
-EXPORT_SYMBOL(recalibrate_cpu_khz);
-
-static void mark_offset_tsc(void)
-{
- unsigned long lost,delay;
- unsigned long delta = last_tsc_low;
- int count;
- int countmp;
- static int count1 = 0;
- unsigned long long this_offset, last_offset;
- static int lost_count = 0;
-
- write_seqlock(&monotonic_lock);
- last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
- /*
- * It is important that these two operations happen almost at
- * the same time. We do the RDTSC stuff first, since it's
- * faster. To avoid any inconsistencies, we need interrupts
- * disabled locally.
- */
-
- /*
- * Interrupts are just disabled locally since the timer irq
- * has the SA_INTERRUPT flag set. -arca
- */
-
- /* read Pentium cycle counter */
-
- rdtsc(last_tsc_low, last_tsc_high);
-
- spin_lock(&i8253_lock);
- outb_p(0x00, PIT_MODE); /* latch the count ASAP */
-
- count = inb_p(PIT_CH0); /* read the latched count */
- count |= inb(PIT_CH0) << 8;
-
- /*
- * VIA686a test code... reset the latch if count > max + 1
- * from timer_pit.c - cjb
- */
- if (count > LATCH) {
- outb_p(0x34, PIT_MODE);
- outb_p(LATCH & 0xff, PIT_CH0);
- outb(LATCH >> 8, PIT_CH0);
- count = LATCH - 1;
- }
-
- spin_unlock(&i8253_lock);
-
- if (pit_latch_buggy) {
- /* get center value of last 3 time lutch */
- if ((count2 >= count && count >= count1)
- || (count1 >= count && count >= count2)) {
- count2 = count1; count1 = count;
- } else if ((count1 >= count2 && count2 >= count)
- || (count >= count2 && count2 >= count1)) {
- countmp = count;count = count2;
- count2 = count1;count1 = countmp;
- } else {
- count2 = count1; count1 = count; count = count1;
- }
- }
-
- /* lost tick compensation */
- delta = last_tsc_low - delta;
- {
- register unsigned long eax, edx;
- eax = delta;
- __asm__("mull %2"
- :"=a" (eax), "=d" (edx)
- :"rm" (fast_gettimeoffset_quotient),
- "0" (eax));
- delta = edx;
- }
- delta += delay_at_last_interrupt;
- lost = delta/(1000000/HZ);
- delay = delta%(1000000/HZ);
- if (lost >= 2 && detect_lost_ticks) {
- jiffies_64 += lost-1;
-
- /* sanity check to ensure we're not always losing ticks */
- if (lost_count++ > 100) {
- printk(KERN_WARNING "Losing too many ticks!\n");
- printk(KERN_WARNING "TSC cannot be used as a timesource. \n");
- printk(KERN_WARNING "Possible reasons for this are:\n");
- printk(KERN_WARNING " You're running with Speedstep,\n");
- printk(KERN_WARNING " You don't have DMA enabled for your hard disk (see hdparm),\n");
- printk(KERN_WARNING " Incorrect TSC synchronization on an SMP system (see dmesg).\n");
- printk(KERN_WARNING "Falling back to a sane timesource now.\n");
-
- clock_fallback();
- }
- /* ... but give the TSC a fair chance */
- if (lost_count > 25)
- cpufreq_delayed_get();
- } else
- lost_count = 0;
- /* update the monotonic base value */
- this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
- monotonic_base += cycles_2_ns(this_offset - last_offset);
- write_sequnlock(&monotonic_lock);
-
- /* calculate delay_at_last_interrupt */
- count = ((LATCH-1) - count) * TICK_SIZE;
- delay_at_last_interrupt = (count + LATCH/2) / LATCH;
-
- /* catch corner case where tick rollover occured
- * between tsc and pit reads (as noted when
- * usec delta is > 90% # of usecs/tick)
- */
- if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ))
- jiffies_64++;
-}
-
-static int __init init_tsc(char* override)
-{
-
- /* check clock override */
- if (override[0] && strncmp(override,"tsc",3)) {
-#ifdef CONFIG_HPET_TIMER
- if (is_hpet_enabled()) {
- printk(KERN_ERR "Warning: clock= override failed. Defaulting to tsc\n");
- } else
-#endif
- {
- return -ENODEV;
- }
- }
-
- /*
- * If we have APM enabled or the CPU clock speed is variable
- * (CPU stops clock on HLT or slows clock to save power)
- * then the TSC timestamps may diverge by up to 1 jiffy from
- * 'real time' but nothing will break.
- * The most frequent case is that the CPU is "woken" from a halt
- * state by the timer interrupt itself, so we get 0 error. In the
- * rare cases where a driver would "wake" the CPU and request a
- * timestamp, the maximum error is < 1 jiffy. But timestamps are
- * still perfectly ordered.
- * Note that the TSC counter will be reset if APM suspends
- * to disk; this won't break the kernel, though, 'cuz we're
- * smart. See arch/i386/kernel/apm.c.
- */
- /*
- * Firstly we have to do a CPU check for chips with
- * a potentially buggy TSC. At this point we haven't run
- * the ident/bugs checks so we must run this hook as it
- * may turn off the TSC flag.
- *
- * NOTE: this doesn't yet handle SMP 486 machines where only
- * some CPU's have a TSC. Thats never worked and nobody has
- * moaned if you have the only one in the world - you fix it!
- */
-
- count2 = LATCH; /* initialize counter for mark_offset_tsc() */
-
- if (cpu_has_tsc) {
- unsigned long tsc_quotient;
-#ifdef CONFIG_HPET_TIMER
- if (is_hpet_enabled() && hpet_use_timer) {
- unsigned long result, remain;
- printk("Using TSC for gettimeofday\n");
- tsc_quotient = calibrate_tsc_hpet(NULL);
- timer_tsc.mark_offset = &mark_offset_tsc_hpet;
- /*
- * Math to calculate hpet to usec multiplier
- * Look for the comments at get_offset_tsc_hpet()
- */
- ASM_DIV64_REG(result, remain, hpet_tick,
- 0, KERNEL_TICK_USEC);
- if (remain > (hpet_tick >> 1))
- result++; /* rounding the result */
-
- hpet_usec_quotient = result;
- } else
-#endif
- {
- tsc_quotient = calibrate_tsc();
- }
-
- if (tsc_quotient) {
- fast_gettimeoffset_quotient = tsc_quotient;
- use_tsc = 1;
- /*
- * We could be more selective here I suspect
- * and just enable this for the next intel chips ?
- */
- /* report CPU clock rate in Hz.
- * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =
- * clock/second. Our precision is about 100 ppm.
- */
- { unsigned long eax=0, edx=1000;
- __asm__("divl %2"
- :"=a" (cpu_khz), "=d" (edx)
- :"r" (tsc_quotient),
- "0" (eax), "1" (edx));
- printk("Detected %u.%03u MHz processor.\n",
- cpu_khz / 1000, cpu_khz % 1000);
- }
- set_cyc2ns_scale(cpu_khz);
- return 0;
- }
- }
- return -ENODEV;
-}
-
-static int tsc_resume(void)
-{
- write_seqlock(&monotonic_lock);
- /* Assume this is the last mark offset time */
- rdtsc(last_tsc_low, last_tsc_high);
-#ifdef CONFIG_HPET_TIMER
- if (is_hpet_enabled() && hpet_use_timer)
- hpet_last = hpet_readl(HPET_COUNTER);
-#endif
- write_sequnlock(&monotonic_lock);
- return 0;
-}
-
-#ifndef CONFIG_X86_TSC
-/* disable flag for tsc. Takes effect by clearing the TSC cpu flag
- * in cpu/common.c */
-static int __init tsc_setup(char *str)
-{
- tsc_disable = 1;
- return 1;
-}
-#else
-static int __init tsc_setup(char *str)
-{
- printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
- "cannot disable TSC.\n");
- return 1;
-}
-#endif
-__setup("notsc", tsc_setup);
-
-
-
-/************************************************************/
-
-/* tsc timer_opts struct */
-static struct timer_opts timer_tsc = {
- .name = "tsc",
- .mark_offset = mark_offset_tsc,
- .get_offset = get_offset_tsc,
- .monotonic_clock = monotonic_clock_tsc,
- .delay = delay_tsc,
- .read_timer = read_timer_tsc,
- .resume = tsc_resume,
-};
-
-struct init_timer_opts __initdata timer_tsc_init = {
- .init = init_tsc,
- .opts = &timer_tsc,
-};