diff options
Diffstat (limited to 'arch/ia64/Kconfig')
| -rw-r--r-- | arch/ia64/Kconfig | 147 |
1 files changed, 30 insertions, 117 deletions
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 7468d8e50467..16714477eef4 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -10,13 +10,16 @@ config IA64 bool select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_MIGHT_HAVE_PC_SERIO - select ACPI if (!IA64_HP_SIM) - select ARCH_SUPPORTS_ACPI if (!IA64_HP_SIM) + select ACPI + select ACPI_NUMA if NUMA + select ARCH_SUPPORTS_ACPI select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI - select FORCE_PCI if (!IA64_HP_SIM) + select FORCE_PCI select PCI_DOMAINS if PCI + select PCI_MSI select PCI_SYSCALL if PCI + select HAVE_ASM_MODVERSIONS select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_EXIT_THREAD select HAVE_IDE @@ -30,8 +33,8 @@ config IA64 select HAVE_ARCH_TRACEHOOK select HAVE_MEMBLOCK_NODE_MAP select HAVE_VIRT_CPU_ACCOUNTING - select ARCH_HAS_DMA_COHERENT_TO_PFN if SWIOTLB - select ARCH_HAS_SYNC_DMA_FOR_CPU if SWIOTLB + select ARCH_HAS_DMA_COHERENT_TO_PFN + select ARCH_HAS_SYNC_DMA_FOR_CPU select VIRT_TO_BUS select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP @@ -45,6 +48,7 @@ config IA64 select ARCH_THREAD_STACK_ALLOCATOR select ARCH_CLOCKSOURCE_DATA select GENERIC_TIME_VSYSCALL + select SWIOTLB select SYSCTL_ARCH_UNALIGN_NO_WARN select HAVE_MOD_ARCH_SPECIFIC select MODULES_USE_ELF_RELA @@ -52,6 +56,7 @@ config IA64 select HAVE_ARCH_AUDITSYSCALL select NEED_DMA_MAP_STATE select NEED_SG_DMA_LENGTH + select NUMA if !FLATMEM default y help The Itanium Processor Family is Intel's 64-bit successor to @@ -66,11 +71,6 @@ config 64BIT config ZONE_DMA32 def_bool y - depends on !IA64_SGI_SN2 - -config QUICKLIST - bool - default y config MMU bool @@ -121,87 +121,6 @@ config AUDIT_ARCH default y choice - prompt "System type" - default IA64_GENERIC - -config IA64_GENERIC - bool "generic" - select NUMA - select ACPI_NUMA - select SWIOTLB - select PCI_MSI - help - This selects the system type of your hardware. A "generic" kernel - will run on any supported IA-64 system. However, if you configure - a kernel for your specific system, it will be faster and smaller. - - generic For any supported IA-64 system - DIG-compliant For DIG ("Developer's Interface Guide") compliant systems - DIG+Intel+IOMMU For DIG systems with Intel IOMMU - HP-zx1/sx1000 For HP systems - HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices. - SGI-SN2 For SGI Altix systems - SGI-UV For SGI UV systems - Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/> - - If you don't know what to do, choose "generic". - -config IA64_DIG - bool "DIG-compliant" - select SWIOTLB - -config IA64_DIG_VTD - bool "DIG+Intel+IOMMU" - select INTEL_IOMMU - select PCI_MSI - -config IA64_HP_ZX1 - bool "HP-zx1/sx1000" - help - Build a kernel that runs on HP zx1 and sx1000 systems. This adds - support for the HP I/O MMU. - -config IA64_HP_ZX1_SWIOTLB - bool "HP-zx1/sx1000 with software I/O TLB" - select SWIOTLB - help - Build a kernel that runs on HP zx1 and sx1000 systems even when they - have broken PCI devices which cannot DMA to full 32 bits. Apart - from support for the HP I/O MMU, this includes support for the software - I/O TLB, which allows supporting the broken devices at the expense of - wasting some kernel memory (about 2MB by default). - -config IA64_SGI_SN2 - bool "SGI-SN2" - select NUMA - select ACPI_NUMA - help - Selecting this option will optimize the kernel for use on sn2 based - systems, but the resulting kernel binary will not run on other - types of ia64 systems. If you have an SGI Altix system, it's safe - to select this option. If in doubt, select ia64 generic support - instead. - -config IA64_SGI_UV - bool "SGI-UV" - select NUMA - select ACPI_NUMA - select SWIOTLB - help - Selecting this option will optimize the kernel for use on UV based - systems, but the resulting kernel binary will not run on other - types of ia64 systems. If you have an SGI UV system, it's safe - to select this option. If in doubt, select ia64 generic support - instead. - -config IA64_HP_SIM - bool "Ski-simulator" - select SWIOTLB - depends on !PM - -endchoice - -choice prompt "Processor type" default ITANIUM @@ -252,14 +171,7 @@ config IA64_PAGE_SIZE_64KB endchoice -if IA64_HP_SIM -config HZ - default 32 -endif - -if !IA64_HP_SIM source "kernel/Kconfig.hz" -endif config IA64_BRL_EMU bool @@ -272,17 +184,26 @@ config IA64_L1_CACHE_SHIFT default "7" if MCKINLEY default "6" if ITANIUM +config IA64_SGI_UV + bool "SGI-UV support" + help + Selecting this option will add specific support for running on SGI + UV based systems. If you have an SGI UV system or are building a + distro kernel, select this option. + +config IA64_HP_SBA_IOMMU + bool "HP SBA IOMMU support" + default y + help + Say Y here to add support for the SBA IOMMU found on HP zx1 and + sx1000 systems. If you're unsure, answer Y. + config IA64_CYCLONE bool "Cyclone (EXA) Time Source support" help Say Y here to enable support for IBM EXA Cyclone time source. If you're unsure, answer N. -config IOSAPIC - bool - depends on !IA64_HP_SIM - default y - config FORCE_MAX_ZONEORDER int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE range 11 17 if !HUGETLB_PAGE @@ -381,14 +302,13 @@ config ARCH_SPARSEMEM_ENABLE select SPARSEMEM_VMEMMAP_ENABLE config ARCH_DISCONTIGMEM_DEFAULT - def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) + def_bool y depends on ARCH_DISCONTIGMEM_ENABLE config NUMA bool "NUMA support" - depends on !IA64_HP_SIM && !FLATMEM - default y if IA64_SGI_SN2 - select ACPI_NUMA if ACPI + depends on !FLATMEM + select SMP help Say Y to compile the kernel to support NUMA (Non-Uniform Memory Access). This option is for configuring high-end multiprocessor @@ -409,7 +329,7 @@ config NODES_SHIFT config VIRTUAL_MEM_MAP bool "Virtual mem map" depends on !SPARSEMEM - default y if !IA64_HP_SIM + default y help Say Y to compile the kernel with support for a virtual mem map. This code also only takes effect if a memory hole of greater than @@ -472,9 +392,6 @@ config IA64_MC_ERR_INJECT If you're unsure, do not select this option. -config SGI_SN - def_bool y if (IA64_SGI_SN2 || IA64_GENERIC) - config IA64_ESI bool "ESI (Extensible SAL Interface) support" help @@ -493,11 +410,9 @@ config IA64_HP_AML_NFW the "force" module parameter, e.g., with the "aml_nfw.force" kernel command line option. -source "drivers/sn/Kconfig" - config KEXEC bool "kexec system call" - depends on !IA64_HP_SIM && (!SMP || HOTPLUG_CPU) + depends on !SMP || HOTPLUG_CPU select KEXEC_CORE help kexec is a system call that implements the ability to shutdown your @@ -515,7 +430,7 @@ config KEXEC config CRASH_DUMP bool "kernel crash dumps" - depends on IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU) + depends on IA64_MCA_RECOVERY && (!SMP || HOTPLUG_CPU) help Generate crash dump after being started by kexec. @@ -537,8 +452,6 @@ endif endmenu -source "arch/ia64/hp/sim/Kconfig" - config MSPEC tristate "Memory special operations driver" depends on IA64 |