4 files changed, 123 insertions, 6 deletions
diff --git a/arch/m68k/coldfire/Makefile b/arch/m68k/coldfire/Makefile
index f8cef9681416..573eabca1a3a 100644
--- a/arch/m68k/coldfire/Makefile
+++ b/arch/m68k/coldfire/Makefile
@@ -35,7 +35,8 @@ obj-$(CONFIG_NETtel)	+= nettel.o
 obj-$(CONFIG_CLEOPATRA)	+= nettel.o
 obj-$(CONFIG_FIREBEE)	+= firebee.o
 obj-$(CONFIG_MCF8390)	+= mcf8390.o
-obj-$(CONFIG_AMCORE)    += amcore.o
+obj-$(CONFIG_AMCORE)	+= amcore.o
+obj-$(CONFIG_STMARK2)	+= stmark2.o
 
 obj-$(CONFIG_PCI)	+= pci.o
 
diff --git a/arch/m68k/coldfire/m5441x.c b/arch/m68k/coldfire/m5441x.c
index 315d14b0dca0..55392af845fb 100644
--- a/arch/m68k/coldfire/m5441x.c
+++ b/arch/m68k/coldfire/m5441x.c
@@ -27,7 +27,7 @@ DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
 DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
 DEFINE_CLK(0, "intc.2", 20, MCF_CLK);
 DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
-DEFINE_CLK(0, "mcfdspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "fsl-dspi.0", 23, MCF_CLK);
 DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
 DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
 DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
@@ -140,6 +140,7 @@ static struct clk * const enable_clks[] __initconst = {
 	&__clk_0_18, /* intc0 */
 	&__clk_0_19, /* intc0 */
 	&__clk_0_20, /* intc0 */
+	&__clk_0_23, /* dspi.0 */
 	&__clk_0_24, /* uart0 */
 	&__clk_0_25, /* uart1 */
 	&__clk_0_26, /* uart2 */
diff --git a/arch/m68k/coldfire/m54xx.c b/arch/m68k/coldfire/m54xx.c
index e53ffed13ba8..adad03ca6e11 100644
--- a/arch/m68k/coldfire/m54xx.c
+++ b/arch/m68k/coldfire/m54xx.c
@@ -96,10 +96,6 @@ static void mcf54xx_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-#ifdef CONFIG_MMU
-	cf_bootmem_alloc();
-	mmu_context_init();
-#endif
 	mach_reset = mcf54xx_reset;
 	mach_sched_init = hw_timer_init;
 	m54xx_uarts_init();
diff --git a/arch/m68k/coldfire/stmark2.c b/arch/m68k/coldfire/stmark2.c
new file mode 100644
index 000000000000..a8d2b3d172f9
--- /dev/null
+++ b/arch/m68k/coldfire/stmark2.c
@@ -0,0 +1,119 @@
+/*
+ * stmark2.c -- Support for Sysam AMCORE open board
+ *
+ * (C) Copyright 2017, Angelo Dureghello <angelo@sysam.it>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-fsl-dspi.h>
+#include <linux/spi/flash.h>
+#include <asm/mcfsim.h>
+
+/*
+ * Partitioning of parallel NOR flash (39VF3201B)
+ */
+static struct mtd_partition stmark2_partitions[] = {
+	{
+		.name = "U-Boot (1024K)",
+		.size = 0x100000,
+		.offset = 0x0
+	}, {
+		.name = "Kernel+initramfs (7168K)",
+		.size = 0x700000,
+		.offset = MTDPART_OFS_APPEND
+	}, {
+		.name = "Flash Free Space (8192K)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND
+	}
+};
+
+static struct flash_platform_data stmark2_spi_flash_data = {
+	.name = "is25lp128",
+	.parts = stmark2_partitions,
+	.nr_parts = ARRAY_SIZE(stmark2_partitions),
+	.type = "is25lp128",
+};
+
+static struct spi_board_info stmark2_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 5000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &stmark2_spi_flash_data,
+		.mode = SPI_MODE_3,
+	}
+};
+
+/* SPI controller data, SPI (0) */
+static struct fsl_dspi_platform_data dspi_spi0_info = {
+	.cs_num = 4,
+	.bus_num = 0,
+	.sck_cs_delay = 100,
+	.cs_sck_delay = 100,
+};
+
+static struct resource dspi_spi0_resource[] = {
+	[0] = {
+		.start = MCFDSPI_BASE0,
+		.end   = MCFDSPI_BASE0 + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = 12,
+		.end   = 13,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = MCF_IRQ_DSPI0,
+		.end   = MCF_IRQ_DSPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/* SPI controller, id = bus number */
+static struct platform_device dspi_spi0_device = {
+	.name = "fsl-dspi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(dspi_spi0_resource),
+	.resource = dspi_spi0_resource,
+	.dev = {
+		.platform_data = &dspi_spi0_info,
+	},
+};
+
+static struct platform_device *stmark2_devices[] __initdata = {
+	&dspi_spi0_device,
+};
+
+/*
+ * Note: proper pin-mux setup is mandatory for proper SPI functionality.
+ */
+static int __init init_stmark2(void)
+{
+	/* DSPI0, all pins as DSPI, and using CS1 */
+	__raw_writeb(0x80, MCFGPIO_PAR_DSPIOWL);
+	__raw_writeb(0xfc, MCFGPIO_PAR_DSPIOWH);
+
+	/* Board gpio setup */
+	__raw_writeb(0x00, MCFGPIO_PAR_BE);
+	__raw_writeb(0x00, MCFGPIO_PAR_FBCTL);
+	__raw_writeb(0x00, MCFGPIO_PAR_CS);
+	__raw_writeb(0x00, MCFGPIO_PAR_CANI2C);
+
+	platform_add_devices(stmark2_devices, ARRAY_SIZE(stmark2_devices));
+
+	spi_register_board_info(stmark2_board_info,
+				ARRAY_SIZE(stmark2_board_info));
+
+	return 0;
+}
+
+late_initcall(init_stmark2);