4 files changed, 0 insertions, 280 deletions
diff --git a/arch/m68k/platform/5307/Makefile b/arch/m68k/platform/5307/Makefile
deleted file mode 100644
index d4293b791f2e..000000000000
--- a/arch/m68k/platform/5307/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Makefile for the m68knommu kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs. You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y			+= config.o gpio.o
-obj-$(CONFIG_NETtel)	+= nettel.o
-obj-$(CONFIG_CLEOPATRA)	+= nettel.o
-
diff --git a/arch/m68k/platform/5307/config.c b/arch/m68k/platform/5307/config.c
deleted file mode 100644
index a568d2870d15..000000000000
--- a/arch/m68k/platform/5307/config.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/5307/config.c
- *
- *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *	Copyright (C) 2000, Lineo (www.lineo.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfwdebug.h>
-
-/***************************************************************************/
-
-/*
- *	Some platforms need software versions of the GPIO data registers.
- */
-unsigned short ppdata;
-unsigned char ledbank = 0xff;
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-#if defined(CONFIG_NETtel) || \
-    defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
-	/* Copy command line from FLASH to local buffer... */
-	memcpy(commandp, (char *) 0xf0004000, size);
-	commandp[size-1] = 0;
-#endif
-
-	mach_sched_init = hw_timer_init;
-
-	/* Only support the external interrupts on their primary level */
-	mcf_mapirq2imr(25, MCFINTC_EINT1);
-	mcf_mapirq2imr(27, MCFINTC_EINT3);
-	mcf_mapirq2imr(29, MCFINTC_EINT5);
-	mcf_mapirq2imr(31, MCFINTC_EINT7);
-
-#ifdef CONFIG_BDM_DISABLE
-	/*
-	 * Disable the BDM clocking.  This also turns off most of the rest of
-	 * the BDM device.  This is good for EMC reasons. This option is not
-	 * incompatible with the memory protection option.
-	 */
-	wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
-#endif
-}
-
-/***************************************************************************/
diff --git a/arch/m68k/platform/5307/gpio.c b/arch/m68k/platform/5307/gpio.c
deleted file mode 100644
index 5850612b4a38..000000000000
--- a/arch/m68k/platform/5307/gpio.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Coldfire generic GPIO support
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-static struct mcf_gpio_chip mcf_gpio_chips[] = {
-	{
-		.gpio_chip			= {
-			.label			= "PP",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value,
-			.ngpio			= 16,
-		},
-		.pddr				= (void __iomem *) MCFSIM_PADDR,
-		.podr				= (void __iomem *) MCFSIM_PADAT,
-		.ppdr				= (void __iomem *) MCFSIM_PADAT,
-	},
-};
-
-static int __init mcf_gpio_init(void)
-{
-	unsigned i = 0;
-	while (i < ARRAY_SIZE(mcf_gpio_chips))
-		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
-	return 0;
-}
-
-core_initcall(mcf_gpio_init);
diff --git a/arch/m68k/platform/5307/nettel.c b/arch/m68k/platform/5307/nettel.c
deleted file mode 100644
index e925ea4602f8..000000000000
--- a/arch/m68k/platform/5307/nettel.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/***************************************************************************/
-
-/*
- *	nettel.c -- startup code support for the NETtel boards
- *
- *	Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/nettel.h>
-
-/***************************************************************************/
-
-/*
- * Define the IO and interrupt resources of the 2 SMC9196 interfaces.
- */
-#define	NETTEL_SMC0_ADDR	0x30600300
-#define	NETTEL_SMC0_IRQ		29
-
-#define	NETTEL_SMC1_ADDR	0x30600000
-#define	NETTEL_SMC1_IRQ		27
-
-/*
- * We need some access into the SMC9196 registers. Define those registers
- * we will need here (including the smc91x.h doesn't seem to give us these
- * in a simple form).
- */
-#define	SMC91xx_BANKSELECT	14
-#define	SMC91xx_BASEADDR	2
-#define	SMC91xx_BASEMAC		4
-
-/***************************************************************************/
-
-static struct resource nettel_smc91x_0_resources[] = {
-	{
-		.start		= NETTEL_SMC0_ADDR,
-		.end		= NETTEL_SMC0_ADDR + 0x20,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= NETTEL_SMC0_IRQ,
-		.end		= NETTEL_SMC0_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource nettel_smc91x_1_resources[] = {
-	{
-		.start		= NETTEL_SMC1_ADDR,
-		.end		= NETTEL_SMC1_ADDR + 0x20,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= NETTEL_SMC1_IRQ,
-		.end		= NETTEL_SMC1_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device nettel_smc91x[] = {
-	{
-		.name			= "smc91x",
-		.id			= 0,
-		.num_resources		= ARRAY_SIZE(nettel_smc91x_0_resources),
-		.resource		= nettel_smc91x_0_resources,
-	},
-	{
-		.name			= "smc91x",
-		.id			= 1,
-		.num_resources		= ARRAY_SIZE(nettel_smc91x_1_resources),
-		.resource		= nettel_smc91x_1_resources,
-	},
-};
-
-static struct platform_device *nettel_devices[] __initdata = {
-	&nettel_smc91x[0],
-	&nettel_smc91x[1],
-};
-
-/***************************************************************************/
-
-static u8 nettel_macdefault[] __initdata = {
-	0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01,
-};
-
-/*
- * Set flash contained MAC address into SMC9196 core. Make sure the flash
- * MAC address is sane, and not an empty flash. If no good use the Moreton
- * Bay default MAC address instead.
- */
-
-static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr)
-{
-	u16 *macp;
-
-	macp = (u16 *) flashaddr;
-	if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff))
-		macp = (u16 *) &nettel_macdefault[0];
-
-	writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
-	writew(macp[0], ioaddr + SMC91xx_BASEMAC);
-	writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2);
-	writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4);
-}
-
-/***************************************************************************/
-
-/*
- * Re-map the address space of at least one of the SMC ethernet
- * parts. Both parts power up decoding the same address, so we
- * need to move one of them first, before doing anything else.
- */
-
-static void __init nettel_smc91x_init(void)
-{
-	writew(0x00ec, MCF_MBAR + MCFSIM_PADDR);
-	mcf_setppdata(0, 0x0080);
-	writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
-	writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
-	mcf_setppdata(0x0080, 0);
-
-	/* Set correct chip select timing for SMC9196 accesses */
-	writew(0x1180, MCF_MBAR + MCFSIM_CSCR3);
-
-	/* Set the SMC interrupts to be auto-vectored */
-	mcf_autovector(NETTEL_SMC0_IRQ);
-	mcf_autovector(NETTEL_SMC1_IRQ);
-
-	/* Set MAC addresses from flash for both interfaces */
-	nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000);
-	nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006);
-}
-
-/***************************************************************************/
-
-static int __init init_nettel(void)
-{
-	nettel_smc91x_init();
-	platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices));
-	return 0;
-}
-
-arch_initcall(init_nettel);
-
-/***************************************************************************/