diff options
Diffstat (limited to 'arch/m68k/platform/68360/head-ram.S')
| -rw-r--r-- | arch/m68k/platform/68360/head-ram.S | 403 |
1 files changed, 0 insertions, 403 deletions
diff --git a/arch/m68k/platform/68360/head-ram.S b/arch/m68k/platform/68360/head-ram.S deleted file mode 100644 index acd213170d80..000000000000 --- a/arch/m68k/platform/68360/head-ram.S +++ /dev/null @@ -1,403 +0,0 @@ -/* arch/m68knommu/platform/68360/head-ram.S - * - * Startup code for Motorola 68360 - * - * Copyright 2001 (C) SED Systems, a Division of Calian Ltd. - * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S - * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7 - * uClinux Kernel - * Copyright (C) Michael Leslie <mleslie@lineo.com> - * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S - * Copyright (C) 1998 D. Jeff Dionne <jeff@uclinux.org>, - * - */ -#define ASSEMBLY - -.global _stext -.global _start - -.global _rambase -.global _ramvec -.global _ramstart -.global _ramend - -.global _quicc_base -.global _periph_base - -#define RAMEND (CONFIG_RAMBASE + CONFIG_RAMSIZE) -#define ROMEND (CONFIG_ROMBASE + CONFIG_ROMSIZE) - -#define REGB 0x1000 -#define PEPAR (_dprbase + REGB + 0x0016) -#define GMR (_dprbase + REGB + 0x0040) -#define OR0 (_dprbase + REGB + 0x0054) -#define BR0 (_dprbase + REGB + 0x0050) -#define OR1 (_dprbase + REGB + 0x0064) -#define BR1 (_dprbase + REGB + 0x0060) -#define OR4 (_dprbase + REGB + 0x0094) -#define BR4 (_dprbase + REGB + 0x0090) -#define OR6 (_dprbase + REGB + 0x00b4) -#define BR6 (_dprbase + REGB + 0x00b0) -#define OR7 (_dprbase + REGB + 0x00c4) -#define BR7 (_dprbase + REGB + 0x00c0) - -#define MCR (_dprbase + REGB + 0x0000) -#define AVR (_dprbase + REGB + 0x0008) - -#define SYPCR (_dprbase + REGB + 0x0022) - -#define PLLCR (_dprbase + REGB + 0x0010) -#define CLKOCR (_dprbase + REGB + 0x000C) -#define CDVCR (_dprbase + REGB + 0x0014) - -#define BKAR (_dprbase + REGB + 0x0030) -#define BKCR (_dprbase + REGB + 0x0034) -#define SWIV (_dprbase + REGB + 0x0023) -#define PICR (_dprbase + REGB + 0x0026) -#define PITR (_dprbase + REGB + 0x002A) - -/* Define for all memory configuration */ -#define MCU_SIM_GMR 0x00000000 -#define SIM_OR_MASK 0x0fffffff - -/* Defines for chip select zero - the flash */ -#define SIM_OR0_MASK 0x20000002 -#define SIM_BR0_MASK 0x00000001 - - -/* Defines for chip select one - the RAM */ -#define SIM_OR1_MASK 0x10000000 -#define SIM_BR1_MASK 0x00000001 - -#define MCU_SIM_MBAR_ADRS 0x0003ff00 -#define MCU_SIM_MBAR_BA_MASK 0xfffff000 -#define MCU_SIM_MBAR_AS_MASK 0x00000001 - -#define MCU_SIM_PEPAR 0x00B4 - -#define MCU_DISABLE_INTRPTS 0x2700 -#define MCU_SIM_AVR 0x00 - -#define MCU_SIM_MCR 0x00005cff - -#define MCU_SIM_CLKOCR 0x00 -#define MCU_SIM_PLLCR 0x8000 -#define MCU_SIM_CDVCR 0x0000 - -#define MCU_SIM_SYPCR 0x0000 -#define MCU_SIM_SWIV 0x00 -#define MCU_SIM_PICR 0x0000 -#define MCU_SIM_PITR 0x0000 - - -#include <asm/m68360_regs.h> - - -/* - * By the time this RAM specific code begins to execute, DPRAM - * and DRAM should already be mapped and accessible. - */ - - .text -_start: -_stext: - nop - ori.w #MCU_DISABLE_INTRPTS, %sr /* disable interrupts: */ - /* We should not need to setup the boot stack the reset should do it. */ - movea.l #RAMEND, %sp /*set up stack at the end of DRAM:*/ - -set_mbar_register: - moveq.l #0x07, %d1 /* Setup MBAR */ - movec %d1, %dfc - - lea.l MCU_SIM_MBAR_ADRS, %a0 - move.l #_dprbase, %d0 - andi.l #MCU_SIM_MBAR_BA_MASK, %d0 - ori.l #MCU_SIM_MBAR_AS_MASK, %d0 - moves.l %d0, %a0@ - - moveq.l #0x05, %d1 - movec.l %d1, %dfc - - /* Now we can begin to access registers in DPRAM */ - -set_sim_mcr: - /* Set Module Configuration Register */ - move.l #MCU_SIM_MCR, MCR - - /* to do: Determine cause of reset */ - - /* - * configure system clock MC68360 p. 6-40 - * (value +1)*osc/128 = system clock - */ -set_sim_clock: - move.w #MCU_SIM_PLLCR, PLLCR - move.b #MCU_SIM_CLKOCR, CLKOCR - move.w #MCU_SIM_CDVCR, CDVCR - - /* Wait for the PLL to settle */ - move.w #16384, %d0 -pll_settle_wait: - subi.w #1, %d0 - bne pll_settle_wait - - /* Setup the system protection register, and watchdog timer register */ - move.b #MCU_SIM_SWIV, SWIV - move.w #MCU_SIM_PICR, PICR - move.w #MCU_SIM_PITR, PITR - move.w #MCU_SIM_SYPCR, SYPCR - - /* Clear DPRAM - system + parameter */ - movea.l #_dprbase, %a0 - movea.l #_dprbase+0x2000, %a1 - - /* Copy 0 to %a0 until %a0 == %a1 */ -clear_dpram: - movel #0, %a0@+ - cmpal %a0, %a1 - bhi clear_dpram - -configure_memory_controller: - /* Set up Global Memory Register (GMR) */ - move.l #MCU_SIM_GMR, %d0 - move.l %d0, GMR - -configure_chip_select_0: - move.l #RAMEND, %d0 - subi.l #__ramstart, %d0 - subq.l #0x01, %d0 - eori.l #SIM_OR_MASK, %d0 - ori.l #SIM_OR0_MASK, %d0 - move.l %d0, OR0 - - move.l #__ramstart, %d0 - ori.l #SIM_BR0_MASK, %d0 - move.l %d0, BR0 - -configure_chip_select_1: - move.l #ROMEND, %d0 - subi.l #__rom_start, %d0 - subq.l #0x01, %d0 - eori.l #SIM_OR_MASK, %d0 - ori.l #SIM_OR1_MASK, %d0 - move.l %d0, OR1 - - move.l #__rom_start, %d0 - ori.l #SIM_BR1_MASK, %d0 - move.l %d0, BR1 - - move.w #MCU_SIM_PEPAR, PEPAR - - /* point to vector table: */ - move.l #_romvec, %a0 - move.l #_ramvec, %a1 -copy_vectors: - move.l %a0@, %d0 - move.l %d0, %a1@ - move.l %a0@, %a1@ - addq.l #0x04, %a0 - addq.l #0x04, %a1 - cmp.l #_start, %a0 - blt copy_vectors - - move.l #_ramvec, %a1 - movec %a1, %vbr - - - /* Copy data segment from ROM to RAM */ - moveal #_stext, %a0 - moveal #_sdata, %a1 - moveal #_edata, %a2 - - /* Copy %a0 to %a1 until %a1 == %a2 */ -LD1: - move.l %a0@, %d0 - addq.l #0x04, %a0 - move.l %d0, %a1@ - addq.l #0x04, %a1 - cmp.l #_edata, %a1 - blt LD1 - - moveal #__bss_start, %a0 - moveal #__bss_stop, %a1 - - /* Copy 0 to %a0 until %a0 == %a1 */ -L1: - movel #0, %a0@+ - cmpal %a0, %a1 - bhi L1 - -load_quicc: - move.l #_dprbase, _quicc_base - -store_ram_size: - /* Set ram size information */ - move.l #_sdata, _rambase - move.l #__bss_stop, _ramstart - move.l #RAMEND, %d0 - sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ - move.l %d0, _ramend /* Different from RAMEND.*/ - - pea 0 - pea env - pea %sp@(4) - pea 0 - - lea init_thread_union, %a2 - lea 0x2000(%a2), %sp - -lp: - jsr start_kernel - -_exit: - jmp _exit - - - .data - .align 4 -env: - .long 0 -_quicc_base: - .long 0 -_periph_base: - .long 0 -_ramvec: - .long 0 -_rambase: - .long 0 -_ramstart: - .long 0 -_ramend: - .long 0 -_dprbase: - .long 0xffffe000 - - .text - - /* - * These are the exception vectors at boot up, they are copied into RAM - * and then overwritten as needed. - */ - -.section ".data..initvect","awx" - .long RAMEND /* Reset: Initial Stack Pointer - 0. */ - .long _start /* Reset: Initial Program Counter - 1. */ - .long buserr /* Bus Error - 2. */ - .long trap /* Address Error - 3. */ - .long trap /* Illegal Instruction - 4. */ - .long trap /* Divide by zero - 5. */ - .long trap /* CHK, CHK2 Instructions - 6. */ - .long trap /* TRAPcc, TRAPV Instructions - 7. */ - .long trap /* Privilege Violation - 8. */ - .long trap /* Trace - 9. */ - .long trap /* Line 1010 Emulator - 10. */ - .long trap /* Line 1111 Emualtor - 11. */ - .long trap /* Harware Breakpoint - 12. */ - .long trap /* (Reserved for Coprocessor Protocol Violation)- 13. */ - .long trap /* Format Error - 14. */ - .long trap /* Uninitialized Interrupt - 15. */ - .long trap /* (Unassigned, Reserver) - 16. */ - .long trap /* (Unassigned, Reserver) - 17. */ - .long trap /* (Unassigned, Reserver) - 18. */ - .long trap /* (Unassigned, Reserver) - 19. */ - .long trap /* (Unassigned, Reserver) - 20. */ - .long trap /* (Unassigned, Reserver) - 21. */ - .long trap /* (Unassigned, Reserver) - 22. */ - .long trap /* (Unassigned, Reserver) - 23. */ - .long trap /* Spurious Interrupt - 24. */ - .long trap /* Level 1 Interrupt Autovector - 25. */ - .long trap /* Level 2 Interrupt Autovector - 26. */ - .long trap /* Level 3 Interrupt Autovector - 27. */ - .long trap /* Level 4 Interrupt Autovector - 28. */ - .long trap /* Level 5 Interrupt Autovector - 29. */ - .long trap /* Level 6 Interrupt Autovector - 30. */ - .long trap /* Level 7 Interrupt Autovector - 31. */ - .long system_call /* Trap Instruction Vectors 0 - 32. */ - .long trap /* Trap Instruction Vectors 1 - 33. */ - .long trap /* Trap Instruction Vectors 2 - 34. */ - .long trap /* Trap Instruction Vectors 3 - 35. */ - .long trap /* Trap Instruction Vectors 4 - 36. */ - .long trap /* Trap Instruction Vectors 5 - 37. */ - .long trap /* Trap Instruction Vectors 6 - 38. */ - .long trap /* Trap Instruction Vectors 7 - 39. */ - .long trap /* Trap Instruction Vectors 8 - 40. */ - .long trap /* Trap Instruction Vectors 9 - 41. */ - .long trap /* Trap Instruction Vectors 10 - 42. */ - .long trap /* Trap Instruction Vectors 11 - 43. */ - .long trap /* Trap Instruction Vectors 12 - 44. */ - .long trap /* Trap Instruction Vectors 13 - 45. */ - .long trap /* Trap Instruction Vectors 14 - 46. */ - .long trap /* Trap Instruction Vectors 15 - 47. */ - .long 0 /* (Reserved for Coprocessor) - 48. */ - .long 0 /* (Reserved for Coprocessor) - 49. */ - .long 0 /* (Reserved for Coprocessor) - 50. */ - .long 0 /* (Reserved for Coprocessor) - 51. */ - .long 0 /* (Reserved for Coprocessor) - 52. */ - .long 0 /* (Reserved for Coprocessor) - 53. */ - .long 0 /* (Reserved for Coprocessor) - 54. */ - .long 0 /* (Reserved for Coprocessor) - 55. */ - .long 0 /* (Reserved for Coprocessor) - 56. */ - .long 0 /* (Reserved for Coprocessor) - 57. */ - .long 0 /* (Reserved for Coprocessor) - 58. */ - .long 0 /* (Unassigned, Reserved) - 59. */ - .long 0 /* (Unassigned, Reserved) - 60. */ - .long 0 /* (Unassigned, Reserved) - 61. */ - .long 0 /* (Unassigned, Reserved) - 62. */ - .long 0 /* (Unassigned, Reserved) - 63. */ - /* The assignment of these vectors to the CPM is */ - /* dependent on the configuration of the CPM vba */ - /* fields. */ - .long 0 /* (User-Defined Vectors 1) CPM Error - 64. */ - .long 0 /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */ - .long 0 /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */ - .long 0 /* (User-Defined Vectors 4) CPM SMC2 / PIP - 67. */ - .long 0 /* (User-Defined Vectors 5) CPM SMC1 - 68. */ - .long 0 /* (User-Defined Vectors 6) CPM SPI - 69. */ - .long 0 /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */ - .long 0 /* (User-Defined Vectors 8) CPM Timer 4 - 71. */ - .long 0 /* (User-Defined Vectors 9) CPM Reserved - 72. */ - .long 0 /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */ - .long 0 /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */ - .long 0 /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */ - .long 0 /* (User-Defined Vectors 13) CPM Timer 3 - 76. */ - .long 0 /* (User-Defined Vectors 14) CPM Reserved - 77. */ - .long 0 /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */ - .long 0 /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */ - .long 0 /* (User-Defined Vectors 17) CPM Reserved - 80. */ - .long 0 /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */ - .long 0 /* (User-Defined Vectors 19) CPM Timer 2 - 82. */ - .long 0 /* (User-Defined Vectors 21) CPM Reserved - 83. */ - .long 0 /* (User-Defined Vectors 22) CPM IDMA2 - 84. */ - .long 0 /* (User-Defined Vectors 23) CPM IDMA1 - 85. */ - .long 0 /* (User-Defined Vectors 24) CPM SDMA Bus Err - 86. */ - .long 0 /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */ - .long 0 /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */ - .long 0 /* (User-Defined Vectors 27) CPM Timer 1 - 89. */ - .long 0 /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */ - .long 0 /* (User-Defined Vectors 29) CPM SCC 4 - 91. */ - .long 0 /* (User-Defined Vectors 30) CPM SCC 3 - 92. */ - .long 0 /* (User-Defined Vectors 31) CPM SCC 2 - 93. */ - .long 0 /* (User-Defined Vectors 32) CPM SCC 1 - 94. */ - .long 0 /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */ - /* I don't think anything uses the vectors after here. */ - .long 0 /* (User-Defined Vectors 34) - 96. */ - .long 0,0,0,0,0 /* (User-Defined Vectors 35 - 39). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 40 - 49). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 50 - 59). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 60 - 69). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 70 - 79). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 80 - 89). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 90 - 99). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 100 - 109). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 110 - 119). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 120 - 129). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 130 - 139). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 140 - 149). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 150 - 159). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 160 - 169). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 170 - 179). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 180 - 189). */ - .long 0,0,0 /* (User-Defined Vectors 190 - 192). */ -.text -ignore: rte |