diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/microblaze/kernel/cpu/cpuinfo.c | 1 | ||||
| -rw-r--r-- | arch/microblaze/kernel/cpu/pvr.c | 4 | ||||
| -rw-r--r-- | arch/microblaze/kernel/entry.S | 46 | ||||
| -rw-r--r-- | arch/microblaze/kernel/exceptions.c | 3 | ||||
| -rw-r--r-- | arch/microblaze/kernel/head.S | 29 | ||||
| -rw-r--r-- | arch/microblaze/kernel/hw_exception_handler.S | 13 | ||||
| -rw-r--r-- | arch/microblaze/kernel/prom.c | 8 | ||||
| -rw-r--r-- | arch/microblaze/kernel/prom_parse.c | 38 | ||||
| -rw-r--r-- | arch/microblaze/kernel/setup.c | 4 | ||||
| -rw-r--r-- | arch/microblaze/kernel/vmlinux.lds.S | 16 |
10 files changed, 81 insertions, 81 deletions
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index 87c79fa275c3..2c309fccf230 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -32,6 +32,7 @@ const struct cpu_ver_key cpu_ver_lookup[] = { {"7.30.a", 0x10}, {"7.30.b", 0x11}, {"8.00.a", 0x12}, + {"8.00.b", 0x13}, {NULL, 0}, }; diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c index e01afa68273e..488c1ed24e38 100644 --- a/arch/microblaze/kernel/cpu/pvr.c +++ b/arch/microblaze/kernel/cpu/pvr.c @@ -27,7 +27,7 @@ register unsigned tmp __asm__("r3"); \ tmp = 0x0; /* Prevent warning about unused */ \ __asm__ __volatile__ ( \ - "mfs %0, rpvr" #pvrid ";" \ + "mfs %0, rpvr" #pvrid ";" \ : "=r" (tmp) : : "memory"); \ val = tmp; \ } @@ -54,7 +54,7 @@ int cpu_has_pvr(void) if (!(flags & PVR_MSR_BIT)) return 0; - get_single_pvr(0x00, pvr0); + get_single_pvr(0, pvr0); pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0); if (pvr0 & PVR0_PVR_FULL_MASK) diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index 819238b8a429..41c30cdb2704 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -287,25 +287,44 @@ * are masked. This is nice, means we don't have to CLI before state save */ C_ENTRY(_user_exception): - addi r14, r14, 4 /* return address is 4 byte after call */ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */ + addi r14, r14, 4 /* return address is 4 byte after call */ + + mfs r1, rmsr + nop + andi r1, r1, MSR_UMS + bnei r1, 1f + +/* Kernel-mode state save - kernel execve */ + lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/ + tophys(r1,r1); + + addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */ + SAVE_REGS + swi r1, r1, PTO + PT_MODE; /* pt_regs -> kernel mode */ + brid 2f; + nop; /* Fill delay slot */ + +/* User-mode state save. */ +1: lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */ tophys(r1,r1); lwi r1, r1, TS_THREAD_INFO; /* get stack from task_struct */ - /* MS these three instructions can be added to one */ - /* addik r1, r1, THREAD_SIZE; */ - /* tophys(r1,r1); */ - /* addik r1, r1, -STATE_SAVE_SIZE; */ - addik r1, r1, THREAD_SIZE + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - STATE_SAVE_SIZE; +/* calculate kernel stack pointer from task struct 8k */ + addik r1, r1, THREAD_SIZE; + tophys(r1,r1); + + addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */ SAVE_REGS swi r0, r1, PTO + PT_R3 swi r0, r1, PTO + PT_R4 + swi r0, r1, PTO + PT_MODE; /* Was in user-mode. */ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); swi r11, r1, PTO+PT_R1; /* Store user SP. */ clear_ums; - lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); +2: lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* Save away the syscall number. */ swi r12, r1, PTO+PT_R0; tovirt(r1,r1) @@ -375,6 +394,9 @@ C_ENTRY(ret_from_trap): swi r3, r1, PTO + PT_R3 swi r4, r1, PTO + PT_R4 + lwi r11, r1, PTO + PT_MODE; +/* See if returning to kernel mode, if so, skip resched &c. */ + bnei r11, 2f; /* We're returning to user mode, so check for various conditions that * trigger rescheduling. */ /* FIXME: Restructure all these flag checks. */ @@ -417,6 +439,16 @@ C_ENTRY(ret_from_trap): RESTORE_REGS; addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ lwi r1, r1, PT_R1 - PT_SIZE;/* Restore user stack pointer. */ + bri 6f; + +/* Return to kernel state. */ +2: set_bip; /* Ints masked for state restore */ + VM_OFF; + tophys(r1,r1); + RESTORE_REGS; + addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ + tovirt(r1,r1); +6: TRAP_return: /* Make global symbol for debugging */ rtbd r14, 0; /* Instructions to return from an IRQ */ nop; diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c index 478f2943ede7..a7fa6ae76d89 100644 --- a/arch/microblaze/kernel/exceptions.c +++ b/arch/microblaze/kernel/exceptions.c @@ -25,6 +25,7 @@ #include <linux/errno.h> #include <linux/ptrace.h> #include <asm/current.h> +#include <asm/cacheflush.h> #define MICROBLAZE_ILL_OPCODE_EXCEPTION 0x02 #define MICROBLAZE_IBUS_EXCEPTION 0x03 @@ -52,6 +53,8 @@ void die(const char *str, struct pt_regs *fp, long err) void sw_exception(struct pt_regs *regs) { _exception(SIGTRAP, regs, TRAP_BRKPT, regs->r16); + flush_dcache_range(regs->r16, regs->r16 + 0x4); + flush_icache_range(regs->r16, regs->r16 + 0x4); } void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 42434008209e..778a5ce2e4fc 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -62,23 +62,32 @@ real_start: andi r1, r1, ~2 mts rmsr, r1 /* - * Here is checking mechanism which check if Microblaze has msr instructions - * We load msr and compare it with previous r1 value - if is the same, - * msr instructions works if not - cpu don't have them. + * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc' + * if the msrclr instruction is not enabled. We use this to detect + * if the opcode is available, by issuing msrclr and then testing the result. + * r8 == 0 - msr instructions are implemented + * r8 != 0 - msr instructions are not implemented */ - /* r8=0 - I have msr instr, 1 - I don't have them */ - rsubi r0, r0, 1 /* set the carry bit */ - msrclr r0, 0x4 /* try to clear it */ - /* read the carry bit, r8 will be '0' if msrclr exists */ - addik r8, r0, 0 + msrclr r8, 0 /* clear nothing - just read msr for test */ + cmpu r8, r8, r1 /* r1 must contain msr reg content */ /* r7 may point to an FDT, or there may be one linked in. if it's in r7, we've got to save it away ASAP. We ensure r7 points to a valid FDT, just in case the bootloader is broken or non-existent */ beqi r7, no_fdt_arg /* NULL pointer? don't copy */ - lw r11, r0, r7 /* Does r7 point to a */ - rsubi r11, r11, OF_DT_HEADER /* valid FDT? */ +/* Does r7 point to a valid FDT? Load HEADER magic number */ + /* Run time Big/Little endian platform */ + /* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */ + addik r11, r0, 0x1 /* BIG/LITTLE checking value */ + /* __bss_start will be zeroed later - it is just temp location */ + swi r11, r0, TOPHYS(__bss_start) + lbui r11, r0, TOPHYS(__bss_start) + beqid r11, big_endian /* DO NOT break delay stop dependency */ + lw r11, r0, r7 /* Big endian load in delay slot */ + lwr r11, r0, r7 /* Little endian load */ +big_endian: + rsubi r11, r11, OF_DT_HEADER /* Check FDT header */ beqi r11, _prepare_copy_fdt or r7, r0, r0 /* clear R7 when not valid DTB */ bnei r11, no_fdt_arg /* No - get out of here */ diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 781195438ee6..782680de3121 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -147,10 +147,6 @@ #if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0 #define BSRLI(rD, rA, imm) \ bsrli rD, rA, imm - #elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0 - #define BSRLI(rD, rA, imm) \ - ori rD, r0, (1 << imm); \ - idivu rD, rD, rA #else #define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA) /* Only the used shift constants defined here - add more if needed */ @@ -945,11 +941,20 @@ store3: sbi r3, r4, 2; store4: sbi r3, r4, 3; /* Delay slot */ ex_shw_vm: /* Store the lower half-word, byte-by-byte into destination address */ +#ifdef __MICROBLAZEEL__ + lbui r3, r5, 0; +store5: sbi r3, r4, 0; + lbui r3, r5, 1; + brid ret_from_exc; +store6: sbi r3, r4, 1; /* Delay slot */ +#else lbui r3, r5, 2; store5: sbi r3, r4, 0; lbui r3, r5, 3; brid ret_from_exc; store6: sbi r3, r4, 1; /* Delay slot */ +#endif + ex_sw_end_vm: /* Exception handling of store word, ends. */ /* We have to prevent cases that get/put_user macros get unaligned pointer diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index a105301e2b7f..bceaa5543e39 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -47,9 +47,9 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size) memblock_add(base, size); } -u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) { - return memblock_alloc(size, align); + return __va(memblock_alloc(size, align)); } #ifdef CONFIG_EARLY_PRINTK @@ -61,14 +61,12 @@ static int __init early_init_dt_scan_serial(unsigned long node, char *p; int *addr; - pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname); + pr_debug("search \"serial\", depth: %d, uname: %s\n", depth, uname); /* find all serial nodes */ if (strncmp(uname, "serial", 6) != 0) return 0; - early_init_dt_check_for_initrd(node); - /* find compatible node with uartlite */ p = of_get_flat_dt_prop(node, "compatible", &l); if ((strncmp(p, "xlnx,xps-uartlite", 17) != 0) && diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c index 99d9b61cccb5..9ae24f4b882b 100644 --- a/arch/microblaze/kernel/prom_parse.c +++ b/arch/microblaze/kernel/prom_parse.c @@ -110,41 +110,3 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, cells = prop ? *(u32 *)prop : of_n_size_cells(dn); *size = of_read_number(dma_window, cells); } - -/** - * Search the device tree for the best MAC address to use. 'mac-address' is - * checked first, because that is supposed to contain to "most recent" MAC - * address. If that isn't set, then 'local-mac-address' is checked next, - * because that is the default address. If that isn't set, then the obsolete - * 'address' is checked, just in case we're using an old device tree. - * - * Note that the 'address' property is supposed to contain a virtual address of - * the register set, but some DTS files have redefined that property to be the - * MAC address. - * - * All-zero MAC addresses are rejected, because those could be properties that - * exist in the device tree, but were not set by U-Boot. For example, the - * DTS could define 'mac-address' and 'local-mac-address', with zero MAC - * addresses. Some older U-Boots only initialized 'local-mac-address'. In - * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists - * but is all zeros. -*/ -const void *of_get_mac_address(struct device_node *np) -{ - struct property *pp; - - pp = of_find_property(np, "mac-address", NULL); - if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) - return pp->value; - - pp = of_find_property(np, "local-mac-address", NULL); - if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) - return pp->value; - - pp = of_find_property(np, "address", NULL); - if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) - return pp->value; - - return NULL; -} -EXPORT_SYMBOL(of_get_mac_address); diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index bb1558e4b283..9312fbb37efd 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -161,11 +161,11 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR if (msr) eprintk("!!!Your kernel has setup MSR instruction but " - "CPU don't have it %d\n", msr); + "CPU don't have it %x\n", msr); #else if (!msr) eprintk("!!!Your kernel not setup MSR instruction but " - "CPU have it %d\n", msr); + "CPU have it %x\n", msr); #endif for (src = __ivt_start; src < __ivt_end; src++, dst++) diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 96a88c31fe48..3451bdec9f05 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -123,20 +123,10 @@ SECTIONS { __init_end_before_initramfs = .; - .init.ramfs ALIGN(PAGE_SIZE) : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - . = ALIGN(4); - LONG(0); -/* - * FIXME this can break initramfs for MMU. - * Pad init.ramfs up to page boundary, - * so that __init_end == __bss_start. This will make image.elf - * consistent with the image.bin - */ - /* . = ALIGN(PAGE_SIZE); */ + .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { + INIT_RAM_FS } + __init_end = .; .bss ALIGN (PAGE_SIZE) : AT(ADDR(.bss) - LOAD_OFFSET) { |