diff options
Diffstat (limited to '')
25 files changed, 270 insertions, 339 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 387d5ffdfd3a..31680032053e 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -14,7 +14,9 @@ config MICROBLAZE select HAVE_DMA_API_DEBUG select TRACING_SUPPORT select OF - select OF_FLATTREE + select OF_EARLY_FLATTREE + select HAVE_GENERIC_HARDIRQS + select GENERIC_IRQ_PROBE config SWAP def_bool n @@ -37,12 +39,6 @@ config GENERIC_FIND_NEXT_BIT config GENERIC_HWEIGHT def_bool y -config GENERIC_HARDIRQS - def_bool y - -config GENERIC_IRQ_PROBE - def_bool y - config GENERIC_CALIBRATE_DELAY def_bool y @@ -52,9 +48,6 @@ config GENERIC_TIME_VSYSCALL config GENERIC_CLOCKEVENTS def_bool y -config GENERIC_HARDIRQS_NO__DO_IRQ - def_bool y - config GENERIC_GPIO def_bool y diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug index e66e25c4b0b2..012e377330cd 100644 --- a/arch/microblaze/Kconfig.debug +++ b/arch/microblaze/Kconfig.debug @@ -23,8 +23,4 @@ config HEART_BEAT This option turns on/off heart beat kernel functionality. First GPIO node is taken. -config DEBUG_BOOTMEM - depends on DEBUG_KERNEL - bool "Debug BOOTMEM initialization" - endmenu diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 15f1f1d1840d..6f432e6df9af 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -17,7 +17,7 @@ export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV # The various CONFIG_XILINX cpu features options are integers 0/1/2... # rather than bools y/n -# Work out HW multipler support. This is icky. +# Work out HW multipler support. This is tricky. # 1. Spartan2 has no HW multiplers. # 2. MicroBlaze v3.x always uses them, except in Spartan 2 # 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile index be01d78750d9..4c4e58ef0cb6 100644 --- a/arch/microblaze/boot/Makefile +++ b/arch/microblaze/boot/Makefile @@ -10,9 +10,6 @@ targets := linux.bin linux.bin.gz simpleImage.% OBJCOPYFLAGS := -O binary -# Where the DTS files live -dtstree := $(srctree)/$(src)/dts - # Ensure system.dtb exists $(obj)/linked_dtb.o: $(obj)/system.dtb @@ -51,14 +48,11 @@ $(obj)/simpleImage.%: vmlinux FORCE $(call if_changed,strip) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' -# Rule to build device tree blobs -DTC = $(objtree)/scripts/dtc/dtc # Rule to build device tree blobs -quiet_cmd_dtc = DTC $@ - cmd_dtc = $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 -p 1024 $(dtstree)/$*.dts +DTC_FLAGS := -p 1024 -$(obj)/%.dtb: $(dtstree)/%.dts FORCE - $(call if_changed,dtc) +$(obj)/%.dtb: $(src)/dts/%.dts FORCE + $(call cmd,dtc) clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index 8b422b12ef78..b3f5eecff2a7 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -7,7 +7,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="rootfs.cpio" CONFIG_INITRAMFS_COMPRESSION_GZIP=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EMBEDDED=y +CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y # CONFIG_HOTPLUG is not set @@ -66,5 +66,4 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_EARLY_PRINTK=y -CONFIG_DEBUG_BOOTMEM=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index ebc143c5368e..0249e4b7e1d3 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -6,7 +6,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_EMBEDDED=y +CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y # CONFIG_HOTPLUG is not set diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h index 5fd31905775d..c4532f032b3b 100644 --- a/arch/microblaze/include/asm/irqflags.h +++ b/arch/microblaze/include/asm/irqflags.h @@ -12,7 +12,7 @@ #include <linux/types.h> #include <asm/registers.h> -#ifdef CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR +#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR static inline unsigned long arch_local_irq_save(void) { diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index cae268c22ba2..885574a73f01 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -411,20 +411,19 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) static inline unsigned long pte_update(pte_t *p, unsigned long clr, unsigned long set) { - unsigned long old, tmp, msr; - - __asm__ __volatile__("\ - msrclr %2, 0x2\n\ - nop\n\ - lw %0, %4, r0\n\ - andn %1, %0, %5\n\ - or %1, %1, %6\n\ - sw %1, %4, r0\n\ - mts rmsr, %2\n\ - nop" - : "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p) - : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p) - : "cc"); + unsigned long flags, old, tmp; + + raw_local_irq_save(flags); + + __asm__ __volatile__( "lw %0, %2, r0 \n" + "andn %1, %0, %3 \n" + "or %1, %1, %4 \n" + "sw %1, %2, r0 \n" + : "=&r" (old), "=&r" (tmp) + : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set) + : "cc"); + + raw_local_irq_restore(flags); return old; } @@ -444,8 +443,9 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, *ptep = pte; } -static inline int ptep_test_and_clear_young(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, + unsigned long address, pte_t *ptep) { return (pte_update(ptep, _PAGE_ACCESSED, 0) & _PAGE_ACCESSED) != 0; } @@ -457,6 +457,7 @@ static inline int ptep_test_and_clear_dirty(struct mm_struct *mm, (_PAGE_DIRTY | _PAGE_HWWRITE), 0) & _PAGE_DIRTY) != 0; } +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h index bdc38312ae4a..2e72af078b05 100644 --- a/arch/microblaze/include/asm/prom.h +++ b/arch/microblaze/include/asm/prom.h @@ -64,9 +64,6 @@ extern void kdump_move_device_tree(void); /* CPU OF node matching */ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); -/* Get the MAC address */ -extern const void *of_get_mac_address(struct device_node *np); - /** * of_irq_map_pci - Resolve the interrupt for a PCI device * @pdev: the device whose interrupt is to be resolved diff --git a/arch/microblaze/include/asm/pvr.h b/arch/microblaze/include/asm/pvr.h index 37db96a15b45..a10bec62e857 100644 --- a/arch/microblaze/include/asm/pvr.h +++ b/arch/microblaze/include/asm/pvr.h @@ -1,9 +1,9 @@ /* * Support for the MicroBlaze PVR (Processor Version Register) * - * Copyright (C) 2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2009 - 2011 Michal Simek <monstr@monstr.eu> * Copyright (C) 2007 John Williams <john.williams@petalogix.com> - * Copyright (C) 2007 - 2009 PetaLogix + * Copyright (C) 2007 - 2011 PetaLogix * * This file is subject to the terms and conditions of the GNU General * Public License. See the file COPYING in the main directory of this @@ -46,11 +46,11 @@ struct pvr_s { #define PVR2_I_LMB_MASK 0x10000000 #define PVR2_INTERRUPT_IS_EDGE_MASK 0x08000000 #define PVR2_EDGE_IS_POSITIVE_MASK 0x04000000 -#define PVR2_D_PLB_MASK 0x02000000 /* new */ -#define PVR2_I_PLB_MASK 0x01000000 /* new */ -#define PVR2_INTERCONNECT 0x00800000 /* new */ -#define PVR2_USE_EXTEND_FSL 0x00080000 /* new */ -#define PVR2_USE_FSL_EXC 0x00040000 /* new */ +#define PVR2_D_PLB_MASK 0x02000000 /* new */ +#define PVR2_I_PLB_MASK 0x01000000 /* new */ +#define PVR2_INTERCONNECT 0x00800000 /* new */ +#define PVR2_USE_EXTEND_FSL 0x00080000 /* new */ +#define PVR2_USE_FSL_EXC 0x00040000 /* new */ #define PVR2_USE_MSR_INSTR 0x00020000 #define PVR2_USE_PCMP_INSTR 0x00010000 #define PVR2_AREA_OPTIMISED 0x00008000 @@ -59,7 +59,7 @@ struct pvr_s { #define PVR2_USE_HW_MUL_MASK 0x00001000 #define PVR2_USE_FPU_MASK 0x00000800 #define PVR2_USE_MUL64_MASK 0x00000400 -#define PVR2_USE_FPU2_MASK 0x00000200 /* new */ +#define PVR2_USE_FPU2_MASK 0x00000200 /* new */ #define PVR2_USE_IPLBEXC 0x00000100 #define PVR2_USE_DPLBEXC 0x00000080 #define PVR2_OPCODE_0x0_ILL_MASK 0x00000040 @@ -122,96 +122,103 @@ struct pvr_s { /* PVR access macros */ -#define PVR_IS_FULL(pvr) (pvr.pvr[0] & PVR0_PVR_FULL_MASK) -#define PVR_USE_BARREL(pvr) (pvr.pvr[0] & PVR0_USE_BARREL_MASK) -#define PVR_USE_DIV(pvr) (pvr.pvr[0] & PVR0_USE_DIV_MASK) -#define PVR_USE_HW_MUL(pvr) (pvr.pvr[0] & PVR0_USE_HW_MUL_MASK) -#define PVR_USE_FPU(pvr) (pvr.pvr[0] & PVR0_USE_FPU_MASK) -#define PVR_USE_FPU2(pvr) (pvr.pvr[2] & PVR2_USE_FPU2_MASK) -#define PVR_USE_ICACHE(pvr) (pvr.pvr[0] & PVR0_USE_ICACHE_MASK) -#define PVR_USE_DCACHE(pvr) (pvr.pvr[0] & PVR0_USE_DCACHE_MASK) -#define PVR_VERSION(pvr) ((pvr.pvr[0] & PVR0_VERSION_MASK) >> 8) -#define PVR_USER1(pvr) (pvr.pvr[0] & PVR0_USER1_MASK) -#define PVR_USER2(pvr) (pvr.pvr[1] & PVR1_USER2_MASK) - -#define PVR_D_OPB(pvr) (pvr.pvr[2] & PVR2_D_OPB_MASK) -#define PVR_D_LMB(pvr) (pvr.pvr[2] & PVR2_D_LMB_MASK) -#define PVR_I_OPB(pvr) (pvr.pvr[2] & PVR2_I_OPB_MASK) -#define PVR_I_LMB(pvr) (pvr.pvr[2] & PVR2_I_LMB_MASK) -#define PVR_INTERRUPT_IS_EDGE(pvr) \ - (pvr.pvr[2] & PVR2_INTERRUPT_IS_EDGE_MASK) -#define PVR_EDGE_IS_POSITIVE(pvr) \ - (pvr.pvr[2] & PVR2_EDGE_IS_POSITIVE_MASK) -#define PVR_USE_MSR_INSTR(pvr) (pvr.pvr[2] & PVR2_USE_MSR_INSTR) -#define PVR_USE_PCMP_INSTR(pvr) (pvr.pvr[2] & PVR2_USE_PCMP_INSTR) -#define PVR_AREA_OPTIMISED(pvr) (pvr.pvr[2] & PVR2_AREA_OPTIMISED) -#define PVR_USE_MUL64(pvr) (pvr.pvr[2] & PVR2_USE_MUL64_MASK) -#define PVR_OPCODE_0x0_ILLEGAL(pvr) \ - (pvr.pvr[2] & PVR2_OPCODE_0x0_ILL_MASK) -#define PVR_UNALIGNED_EXCEPTION(pvr) \ - (pvr.pvr[2] & PVR2_UNALIGNED_EXC_MASK) -#define PVR_ILL_OPCODE_EXCEPTION(pvr) \ - (pvr.pvr[2] & PVR2_ILL_OPCODE_EXC_MASK) -#define PVR_IOPB_BUS_EXCEPTION(pvr) \ - (pvr.pvr[2] & PVR2_IOPB_BUS_EXC_MASK) -#define PVR_DOPB_BUS_EXCEPTION(pvr) \ - (pvr.pvr[2] & PVR2_DOPB_BUS_EXC_MASK) -#define PVR_DIV_ZERO_EXCEPTION(pvr) \ - (pvr.pvr[2] & PVR2_DIV_ZERO_EXC_MASK) -#define PVR_FPU_EXCEPTION(pvr) (pvr.pvr[2] & PVR2_FPU_EXC_MASK) -#define PVR_FSL_EXCEPTION(pvr) (pvr.pvr[2] & PVR2_USE_EXTEND_FSL) - -#define PVR_DEBUG_ENABLED(pvr) (pvr.pvr[3] & PVR3_DEBUG_ENABLED_MASK) -#define PVR_NUMBER_OF_PC_BRK(pvr) \ - ((pvr.pvr[3] & PVR3_NUMBER_OF_PC_BRK_MASK) >> 25) -#define PVR_NUMBER_OF_RD_ADDR_BRK(pvr) \ - ((pvr.pvr[3] & PVR3_NUMBER_OF_RD_ADDR_BRK_MASK) >> 19) -#define PVR_NUMBER_OF_WR_ADDR_BRK(pvr) \ - ((pvr.pvr[3] & PVR3_NUMBER_OF_WR_ADDR_BRK_MASK) >> 13) -#define PVR_FSL_LINKS(pvr) ((pvr.pvr[3] & PVR3_FSL_LINKS_MASK) >> 7) - -#define PVR_ICACHE_ADDR_TAG_BITS(pvr) \ - ((pvr.pvr[4] & PVR4_ICACHE_ADDR_TAG_BITS_MASK) >> 26) -#define PVR_ICACHE_USE_FSL(pvr) (pvr.pvr[4] & PVR4_ICACHE_USE_FSL_MASK) -#define PVR_ICACHE_ALLOW_WR(pvr) (pvr.pvr[4] & PVR4_ICACHE_ALLOW_WR_MASK) -#define PVR_ICACHE_LINE_LEN(pvr) \ - (1 << ((pvr.pvr[4] & PVR4_ICACHE_LINE_LEN_MASK) >> 21)) -#define PVR_ICACHE_BYTE_SIZE(pvr) \ - (1 << ((pvr.pvr[4] & PVR4_ICACHE_BYTE_SIZE_MASK) >> 16)) - -#define PVR_DCACHE_ADDR_TAG_BITS(pvr) \ - ((pvr.pvr[5] & PVR5_DCACHE_ADDR_TAG_BITS_MASK) >> 26) -#define PVR_DCACHE_USE_FSL(pvr) (pvr.pvr[5] & PVR5_DCACHE_USE_FSL_MASK) -#define PVR_DCACHE_ALLOW_WR(pvr) (pvr.pvr[5] & PVR5_DCACHE_ALLOW_WR_MASK) +#define PVR_IS_FULL(_pvr) (_pvr.pvr[0] & PVR0_PVR_FULL_MASK) +#define PVR_USE_BARREL(_pvr) (_pvr.pvr[0] & PVR0_USE_BARREL_MASK) +#define PVR_USE_DIV(_pvr) (_pvr.pvr[0] & PVR0_USE_DIV_MASK) +#define PVR_USE_HW_MUL(_pvr) (_pvr.pvr[0] & PVR0_USE_HW_MUL_MASK) +#define PVR_USE_FPU(_pvr) (_pvr.pvr[0] & PVR0_USE_FPU_MASK) +#define PVR_USE_FPU2(_pvr) (_pvr.pvr[2] & PVR2_USE_FPU2_MASK) +#define PVR_USE_ICACHE(_pvr) (_pvr.pvr[0] & PVR0_USE_ICACHE_MASK) +#define PVR_USE_DCACHE(_pvr) (_pvr.pvr[0] & PVR0_USE_DCACHE_MASK) +#define PVR_VERSION(_pvr) ((_pvr.pvr[0] & PVR0_VERSION_MASK) >> 8) +#define PVR_USER1(_pvr) (_pvr.pvr[0] & PVR0_USER1_MASK) +#define PVR_USER2(_pvr) (_pvr.pvr[1] & PVR1_USER2_MASK) + +#define PVR_D_OPB(_pvr) (_pvr.pvr[2] & PVR2_D_OPB_MASK) +#define PVR_D_LMB(_pvr) (_pvr.pvr[2] & PVR2_D_LMB_MASK) +#define PVR_I_OPB(_pvr) (_pvr.pvr[2] & PVR2_I_OPB_MASK) +#define PVR_I_LMB(_pvr) (_pvr.pvr[2] & PVR2_I_LMB_MASK) +#define PVR_INTERRUPT_IS_EDGE(_pvr) \ + (_pvr.pvr[2] & PVR2_INTERRUPT_IS_EDGE_MASK) +#define PVR_EDGE_IS_POSITIVE(_pvr) \ + (_pvr.pvr[2] & PVR2_EDGE_IS_POSITIVE_MASK) +#define PVR_USE_MSR_INSTR(_pvr) (_pvr.pvr[2] & PVR2_USE_MSR_INSTR) +#define PVR_USE_PCMP_INSTR(_pvr) (_pvr.pvr[2] & PVR2_USE_PCMP_INSTR) +#define PVR_AREA_OPTIMISED(_pvr) (_pvr.pvr[2] & PVR2_AREA_OPTIMISED) +#define PVR_USE_MUL64(_pvr) (_pvr.pvr[2] & PVR2_USE_MUL64_MASK) +#define PVR_OPCODE_0x0_ILLEGAL(_pvr) \ + (_pvr.pvr[2] & PVR2_OPCODE_0x0_ILL_MASK) +#define PVR_UNALIGNED_EXCEPTION(_pvr) \ + (_pvr.pvr[2] & PVR2_UNALIGNED_EXC_MASK) +#define PVR_ILL_OPCODE_EXCEPTION(_pvr) \ + (_pvr.pvr[2] & PVR2_ILL_OPCODE_EXC_MASK) +#define PVR_IOPB_BUS_EXCEPTION(_pvr) \ + (_pvr.pvr[2] & PVR2_IOPB_BUS_EXC_MASK) +#define PVR_DOPB_BUS_EXCEPTION(_pvr) \ + (_pvr.pvr[2] & PVR2_DOPB_BUS_EXC_MASK) +#define PVR_DIV_ZERO_EXCEPTION(_pvr) \ + (_pvr.pvr[2] & PVR2_DIV_ZERO_EXC_MASK) +#define PVR_FPU_EXCEPTION(_pvr) (_pvr.pvr[2] & PVR2_FPU_EXC_MASK) +#define PVR_FSL_EXCEPTION(_pvr) (_pvr.pvr[2] & PVR2_USE_EXTEND_FSL) + +#define PVR_DEBUG_ENABLED(_pvr) (_pvr.pvr[3] & PVR3_DEBUG_ENABLED_MASK) +#define PVR_NUMBER_OF_PC_BRK(_pvr) \ + ((_pvr.pvr[3] & PVR3_NUMBER_OF_PC_BRK_MASK) >> 25) +#define PVR_NUMBER_OF_RD_ADDR_BRK(_pvr) \ + ((_pvr.pvr[3] & PVR3_NUMBER_OF_RD_ADDR_BRK_MASK) >> 19) +#define PVR_NUMBER_OF_WR_ADDR_BRK(_pvr) \ + ((_pvr.pvr[3] & PVR3_NUMBER_OF_WR_ADDR_BRK_MASK) >> 13) +#define PVR_FSL_LINKS(_pvr) ((_pvr.pvr[3] & PVR3_FSL_LINKS_MASK) >> 7) + +#define PVR_ICACHE_ADDR_TAG_BITS(_pvr) \ + ((_pvr.pvr[4] & PVR4_ICACHE_ADDR_TAG_BITS_MASK) >> 26) +#define PVR_ICACHE_USE_FSL(_pvr) \ + (_pvr.pvr[4] & PVR4_ICACHE_USE_FSL_MASK) +#define PVR_ICACHE_ALLOW_WR(_pvr) \ + (_pvr.pvr[4] & PVR4_ICACHE_ALLOW_WR_MASK) +#define PVR_ICACHE_LINE_LEN(_pvr) \ + (1 << ((_pvr.pvr[4] & PVR4_ICACHE_LINE_LEN_MASK) >> 21)) +#define PVR_ICACHE_BYTE_SIZE(_pvr) \ + (1 << ((_pvr.pvr[4] & PVR4_ICACHE_BYTE_SIZE_MASK) >> 16)) + +#define PVR_DCACHE_ADDR_TAG_BITS(_pvr) \ + ((_pvr.pvr[5] & PVR5_DCACHE_ADDR_TAG_BITS_MASK) >> 26) +#define PVR_DCACHE_USE_FSL(_pvr) (_pvr.pvr[5] & PVR5_DCACHE_USE_FSL_MASK) +#define PVR_DCACHE_ALLOW_WR(_pvr) \ + (_pvr.pvr[5] & PVR5_DCACHE_ALLOW_WR_MASK) /* FIXME two shifts on one line needs any comment */ -#define PVR_DCACHE_LINE_LEN(pvr) \ - (1 << ((pvr.pvr[5] & PVR5_DCACHE_LINE_LEN_MASK) >> 21)) -#define PVR_DCACHE_BYTE_SIZE(pvr) \ - (1 << ((pvr.pvr[5] & PVR5_DCACHE_BYTE_SIZE_MASK) >> 16)) +#define PVR_DCACHE_LINE_LEN(_pvr) \ + (1 << ((_pvr.pvr[5] & PVR5_DCACHE_LINE_LEN_MASK) >> 21)) +#define PVR_DCACHE_BYTE_SIZE(_pvr) \ + (1 << ((_pvr.pvr[5] & PVR5_DCACHE_BYTE_SIZE_MASK) >> 16)) -#define PVR_DCACHE_USE_WRITEBACK(pvr) \ - ((pvr.pvr[5] & PVR5_DCACHE_USE_WRITEBACK) >> 14) +#define PVR_DCACHE_USE_WRITEBACK(_pvr) \ + ((_pvr.pvr[5] & PVR5_DCACHE_USE_WRITEBACK) >> 14) -#define PVR_ICACHE_BASEADDR(pvr) (pvr.pvr[6] & PVR6_ICACHE_BASEADDR_MASK) -#define PVR_ICACHE_HIGHADDR(pvr) (pvr.pvr[7] & PVR7_ICACHE_HIGHADDR_MASK) +#define PVR_ICACHE_BASEADDR(_pvr) \ + (_pvr.pvr[6] & PVR6_ICACHE_BASEADDR_MASK) +#define PVR_ICACHE_HIGHADDR(_pvr) \ + (_pvr.pvr[7] & PVR7_ICACHE_HIGHADDR_MASK) +#define PVR_DCACHE_BASEADDR(_pvr) \ + (_pvr.pvr[8] & PVR8_DCACHE_BASEADDR_MASK) +#define PVR_DCACHE_HIGHADDR(_pvr) \ + (_pvr.pvr[9] & PVR9_DCACHE_HIGHADDR_MASK) -#define PVR_DCACHE_BASEADDR(pvr) (pvr.pvr[8] & PVR8_DCACHE_BASEADDR_MASK) -#define PVR_DCACHE_HIGHADDR(pvr) (pvr.pvr[9] & PVR9_DCACHE_HIGHADDR_MASK) +#define PVR_TARGET_FAMILY(_pvr) \ + ((_pvr.pvr[10] & PVR10_TARGET_FAMILY_MASK) >> 24) -#define PVR_TARGET_FAMILY(pvr) ((pvr.pvr[10] & PVR10_TARGET_FAMILY_MASK) >> 24) - -#define PVR_MSR_RESET_VALUE(pvr) \ - (pvr.pvr[11] & PVR11_MSR_RESET_VALUE_MASK) +#define PVR_MSR_RESET_VALUE(_pvr) \ + (_pvr.pvr[11] & PVR11_MSR_RESET_VALUE_MASK) /* mmu */ -#define PVR_USE_MMU(pvr) ((pvr.pvr[11] & PVR11_USE_MMU) >> 30) -#define PVR_MMU_ITLB_SIZE(pvr) (pvr.pvr[11] & PVR11_MMU_ITLB_SIZE) -#define PVR_MMU_DTLB_SIZE(pvr) (pvr.pvr[11] & PVR11_MMU_DTLB_SIZE) -#define PVR_MMU_TLB_ACCESS(pvr) (pvr.pvr[11] & PVR11_MMU_TLB_ACCESS) -#define PVR_MMU_ZONES(pvr) (pvr.pvr[11] & PVR11_MMU_ZONES) +#define PVR_USE_MMU(_pvr) ((_pvr.pvr[11] & PVR11_USE_MMU) >> 30) +#define PVR_MMU_ITLB_SIZE(_pvr) (_pvr.pvr[11] & PVR11_MMU_ITLB_SIZE) +#define PVR_MMU_DTLB_SIZE(_pvr) (_pvr.pvr[11] & PVR11_MMU_DTLB_SIZE) +#define PVR_MMU_TLB_ACCESS(_pvr) (_pvr.pvr[11] & PVR11_MMU_TLB_ACCESS) +#define PVR_MMU_ZONES(_pvr) (_pvr.pvr[11] & PVR11_MMU_ZONES) /* endian */ -#define PVR_ENDIAN(pvr) (pvr.pvr[0] & PVR0_ENDI) +#define PVR_ENDIAN(_pvr) (_pvr.pvr[0] & PVR0_ENDI) int cpu_has_pvr(void); void get_pvr(struct pvr_s *pvr); diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h index e8abd4a0349c..8aa97817cc8c 100644 --- a/arch/microblaze/include/asm/tlb.h +++ b/arch/microblaze/include/asm/tlb.h @@ -13,6 +13,7 @@ #define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) +#include <linux/pagemap.h> #include <asm-generic/tlb.h> #ifdef CONFIG_MMU diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index 87c79fa275c3..2c309fccf230 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -32,6 +32,7 @@ const struct cpu_ver_key cpu_ver_lookup[] = { {"7.30.a", 0x10}, {"7.30.b", 0x11}, {"8.00.a", 0x12}, + {"8.00.b", 0x13}, {NULL, 0}, }; diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c index e01afa68273e..488c1ed24e38 100644 --- a/arch/microblaze/kernel/cpu/pvr.c +++ b/arch/microblaze/kernel/cpu/pvr.c @@ -27,7 +27,7 @@ register unsigned tmp __asm__("r3"); \ tmp = 0x0; /* Prevent warning about unused */ \ __asm__ __volatile__ ( \ - "mfs %0, rpvr" #pvrid ";" \ + "mfs %0, rpvr" #pvrid ";" \ : "=r" (tmp) : : "memory"); \ val = tmp; \ } @@ -54,7 +54,7 @@ int cpu_has_pvr(void) if (!(flags & PVR_MSR_BIT)) return 0; - get_single_pvr(0x00, pvr0); + get_single_pvr(0, pvr0); pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0); if (pvr0 & PVR0_PVR_FULL_MASK) diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index 819238b8a429..41c30cdb2704 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -287,25 +287,44 @@ * are masked. This is nice, means we don't have to CLI before state save */ C_ENTRY(_user_exception): - addi r14, r14, 4 /* return address is 4 byte after call */ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */ + addi r14, r14, 4 /* return address is 4 byte after call */ + + mfs r1, rmsr + nop + andi r1, r1, MSR_UMS + bnei r1, 1f + +/* Kernel-mode state save - kernel execve */ + lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/ + tophys(r1,r1); + + addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */ + SAVE_REGS + swi r1, r1, PTO + PT_MODE; /* pt_regs -> kernel mode */ + brid 2f; + nop; /* Fill delay slot */ + +/* User-mode state save. */ +1: lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */ tophys(r1,r1); lwi r1, r1, TS_THREAD_INFO; /* get stack from task_struct */ - /* MS these three instructions can be added to one */ - /* addik r1, r1, THREAD_SIZE; */ - /* tophys(r1,r1); */ - /* addik r1, r1, -STATE_SAVE_SIZE; */ - addik r1, r1, THREAD_SIZE + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - STATE_SAVE_SIZE; +/* calculate kernel stack pointer from task struct 8k */ + addik r1, r1, THREAD_SIZE; + tophys(r1,r1); + + addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */ SAVE_REGS swi r0, r1, PTO + PT_R3 swi r0, r1, PTO + PT_R4 + swi r0, r1, PTO + PT_MODE; /* Was in user-mode. */ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); swi r11, r1, PTO+PT_R1; /* Store user SP. */ clear_ums; - lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); +2: lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* Save away the syscall number. */ swi r12, r1, PTO+PT_R0; tovirt(r1,r1) @@ -375,6 +394,9 @@ C_ENTRY(ret_from_trap): swi r3, r1, PTO + PT_R3 swi r4, r1, PTO + PT_R4 + lwi r11, r1, PTO + PT_MODE; +/* See if returning to kernel mode, if so, skip resched &c. */ + bnei r11, 2f; /* We're returning to user mode, so check for various conditions that * trigger rescheduling. */ /* FIXME: Restructure all these flag checks. */ @@ -417,6 +439,16 @@ C_ENTRY(ret_from_trap): RESTORE_REGS; addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ lwi r1, r1, PT_R1 - PT_SIZE;/* Restore user stack pointer. */ + bri 6f; + +/* Return to kernel state. */ +2: set_bip; /* Ints masked for state restore */ + VM_OFF; + tophys(r1,r1); + RESTORE_REGS; + addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ + tovirt(r1,r1); +6: TRAP_return: /* Make global symbol for debugging */ rtbd r14, 0; /* Instructions to return from an IRQ */ nop; diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c index 478f2943ede7..a7fa6ae76d89 100644 --- a/arch/microblaze/kernel/exceptions.c +++ b/arch/microblaze/kernel/exceptions.c @@ -25,6 +25,7 @@ #include <linux/errno.h> #include <linux/ptrace.h> #include <asm/current.h> +#include <asm/cacheflush.h> #define MICROBLAZE_ILL_OPCODE_EXCEPTION 0x02 #define MICROBLAZE_IBUS_EXCEPTION 0x03 @@ -52,6 +53,8 @@ void die(const char *str, struct pt_regs *fp, long err) void sw_exception(struct pt_regs *regs) { _exception(SIGTRAP, regs, TRAP_BRKPT, regs->r16); + flush_dcache_range(regs->r16, regs->r16 + 0x4); + flush_icache_range(regs->r16, regs->r16 + 0x4); } void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 42434008209e..778a5ce2e4fc 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -62,23 +62,32 @@ real_start: andi r1, r1, ~2 mts rmsr, r1 /* - * Here is checking mechanism which check if Microblaze has msr instructions - * We load msr and compare it with previous r1 value - if is the same, - * msr instructions works if not - cpu don't have them. + * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc' + * if the msrclr instruction is not enabled. We use this to detect + * if the opcode is available, by issuing msrclr and then testing the result. + * r8 == 0 - msr instructions are implemented + * r8 != 0 - msr instructions are not implemented */ - /* r8=0 - I have msr instr, 1 - I don't have them */ - rsubi r0, r0, 1 /* set the carry bit */ - msrclr r0, 0x4 /* try to clear it */ - /* read the carry bit, r8 will be '0' if msrclr exists */ - addik r8, r0, 0 + msrclr r8, 0 /* clear nothing - just read msr for test */ + cmpu r8, r8, r1 /* r1 must contain msr reg content */ /* r7 may point to an FDT, or there may be one linked in. if it's in r7, we've got to save it away ASAP. We ensure r7 points to a valid FDT, just in case the bootloader is broken or non-existent */ beqi r7, no_fdt_arg /* NULL pointer? don't copy */ - lw r11, r0, r7 /* Does r7 point to a */ - rsubi r11, r11, OF_DT_HEADER /* valid FDT? */ +/* Does r7 point to a valid FDT? Load HEADER magic number */ + /* Run time Big/Little endian platform */ + /* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */ + addik r11, r0, 0x1 /* BIG/LITTLE checking value */ + /* __bss_start will be zeroed later - it is just temp location */ + swi r11, r0, TOPHYS(__bss_start) + lbui r11, r0, TOPHYS(__bss_start) + beqid r11, big_endian /* DO NOT break delay stop dependency */ + lw r11, r0, r7 /* Big endian load in delay slot */ + lwr r11, r0, r7 /* Little endian load */ +big_endian: + rsubi r11, r11, OF_DT_HEADER /* Check FDT header */ beqi r11, _prepare_copy_fdt or r7, r0, r0 /* clear R7 when not valid DTB */ bnei r11, no_fdt_arg /* No - get out of here */ diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 781195438ee6..782680de3121 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -147,10 +147,6 @@ #if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0 #define BSRLI(rD, rA, imm) \ bsrli rD, rA, imm - #elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0 - #define BSRLI(rD, rA, imm) \ - ori rD, r0, (1 << imm); \ - idivu rD, rD, rA #else #define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA) /* Only the used shift constants defined here - add more if needed */ @@ -945,11 +941,20 @@ store3: sbi r3, r4, 2; store4: sbi r3, r4, 3; /* Delay slot */ ex_shw_vm: /* Store the lower half-word, byte-by-byte into destination address */ +#ifdef __MICROBLAZEEL__ + lbui r3, r5, 0; +store5: sbi r3, r4, 0; + lbui r3, r5, 1; + brid ret_from_exc; +store6: sbi r3, r4, 1; /* Delay slot */ +#else lbui r3, r5, 2; store5: sbi r3, r4, 0; lbui r3, r5, 3; brid ret_from_exc; store6: sbi r3, r4, 1; /* Delay slot */ +#endif + ex_sw_end_vm: /* Exception handling of store word, ends. */ /* We have to prevent cases that get/put_user macros get unaligned pointer diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index a105301e2b7f..bceaa5543e39 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -47,9 +47,9 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size) memblock_add(base, size); } -u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) { - return memblock_alloc(size, align); + return __va(memblock_alloc(size, align)); } #ifdef CONFIG_EARLY_PRINTK @@ -61,14 +61,12 @@ static int __init early_init_dt_scan_serial(unsigned long node, char *p; int *addr; - pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname); + pr_debug("search \"serial\", depth: %d, uname: %s\n", depth, uname); /* find all serial nodes */ if (strncmp(uname, "serial", 6) != 0) return 0; - early_init_dt_check_for_initrd(node); - /* find compatible node with uartlite */ p = of_get_flat_dt_prop(node, "compatible", &l); if ((strncmp(p, "xlnx,xps-uartlite", 17) != 0) && diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c index 99d9b61cccb5..9ae24f4b882b 100644 --- a/arch/microblaze/kernel/prom_parse.c +++ b/arch/microblaze/kernel/prom_parse.c @@ -110,41 +110,3 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, cells = prop ? *(u32 *)prop : of_n_size_cells(dn); *size = of_read_number(dma_window, cells); } - -/** - * Search the device tree for the best MAC address to use. 'mac-address' is - * checked first, because that is supposed to contain to "most recent" MAC - * address. If that isn't set, then 'local-mac-address' is checked next, - * because that is the default address. If that isn't set, then the obsolete - * 'address' is checked, just in case we're using an old device tree. - * - * Note that the 'address' property is supposed to contain a virtual address of - * the register set, but some DTS files have redefined that property to be the - * MAC address. - * - * All-zero MAC addresses are rejected, because those could be properties that - * exist in the device tree, but were not set by U-Boot. For example, the - * DTS could define 'mac-address' and 'local-mac-address', with zero MAC - * addresses. Some older U-Boots only initialized 'local-mac-address'. In - * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists - * but is all zeros. -*/ -const void *of_get_mac_address(struct device_node *np) -{ - struct property *pp; - - pp = of_find_property(np, "mac-address", NULL); - if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) - return pp->value; - - pp = of_find_property(np, "local-mac-address", NULL); - if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) - return pp->value; - - pp = of_find_property(np, "address", NULL); - if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) - return pp->value; - - return NULL; -} -EXPORT_SYMBOL(of_get_mac_address); diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index bb1558e4b283..9312fbb37efd 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -161,11 +161,11 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR if (msr) eprintk("!!!Your kernel has setup MSR instruction but " - "CPU don't have it %d\n", msr); + "CPU don't have it %x\n", msr); #else if (!msr) eprintk("!!!Your kernel not setup MSR instruction but " - "CPU have it %d\n", msr); + "CPU have it %x\n", msr); #endif for (src = __ivt_start; src < __ivt_end; src++, dst++) diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 96a88c31fe48..3451bdec9f05 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -123,20 +123,10 @@ SECTIONS { __init_end_before_initramfs = .; - .init.ramfs ALIGN(PAGE_SIZE) : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - . = ALIGN(4); - LONG(0); -/* - * FIXME this can break initramfs for MMU. - * Pad init.ramfs up to page boundary, - * so that __init_end == __bss_start. This will make image.elf - * consistent with the image.bin - */ - /* . = ALIGN(PAGE_SIZE); */ + .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { + INIT_RAM_FS } + __init_end = .; .bss ALIGN (PAGE_SIZE) : AT(ADDR(.bss) - LOAD_OFFSET) { diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S index fdc48bb065d8..62021d7e249e 100644 --- a/arch/microblaze/lib/fastcopy.S +++ b/arch/microblaze/lib/fastcopy.S @@ -29,6 +29,10 @@ * between mem locations with size of xfer spec'd in bytes */ +#ifdef __MICROBLAZEEL__ +#error Microblaze LE not support ASM optimized lib func. Disable OPT_LIB_ASM. +#endif + #include <linux/linkage.h> .text .globl memcpy diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c index 123e3616f2dd..810fd68775e3 100644 --- a/arch/microblaze/lib/memmove.c +++ b/arch/microblaze/lib/memmove.c @@ -182,7 +182,7 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c) for (; c >= 4; c -= 4) { value = *--i_src; *--i_dst = buf_hold | ((value & 0xFF000000)>> 24); - buf_hold = (value & 0xFFFFFF) << 8;; + buf_hold = (value & 0xFFFFFF) << 8; } #endif /* Realign the source */ diff --git a/arch/microblaze/lib/muldi3.S b/arch/microblaze/lib/muldi3.S deleted file mode 100644 index ceeaa8c407f2..000000000000 --- a/arch/microblaze/lib/muldi3.S +++ /dev/null @@ -1,121 +0,0 @@ -#include <linux/linkage.h> - -/* - * Multiply operation for 64 bit integers, for devices with hard multiply - * Input : Operand1[H] in Reg r5 - * Operand1[L] in Reg r6 - * Operand2[H] in Reg r7 - * Operand2[L] in Reg r8 - * Output: Result[H] in Reg r3 - * Result[L] in Reg r4 - * - * Explaination: - * - * Both the input numbers are divided into 16 bit number as follows - * op1 = A B C D - * op2 = E F G H - * result = D * H - * + (C * H + D * G) << 16 - * + (B * H + C * G + D * F) << 32 - * + (A * H + B * G + C * F + D * E) << 48 - * - * Only 64 bits of the output are considered - */ - - .text - .globl __muldi3 - .type __muldi3, @function - .ent __muldi3 - -__muldi3: - addi r1, r1, -40 - -/* Save the input operands on the caller's stack */ - swi r5, r1, 44 - swi r6, r1, 48 - swi r7, r1, 52 - swi r8, r1, 56 - -/* Store all the callee saved registers */ - sw r20, r1, r0 - swi r21, r1, 4 - swi r22, r1, 8 - swi r23, r1, 12 - swi r24, r1, 16 - swi r25, r1, 20 - swi r26, r1, 24 - swi r27, r1, 28 - -/* Load all the 16 bit values for A thru H */ - lhui r20, r1, 44 /* A */ - lhui r21, r1, 46 /* B */ - lhui r22, r1, 48 /* C */ - lhui r23, r1, 50 /* D */ - lhui r24, r1, 52 /* E */ - lhui r25, r1, 54 /* F */ - lhui r26, r1, 56 /* G */ - lhui r27, r1, 58 /* H */ - -/* D * H ==> LSB of the result on stack ==> Store1 */ - mul r9, r23, r27 - swi r9, r1, 36 /* Pos2 and Pos3 */ - -/* Hi (Store1) + C * H + D * G ==> Store2 ==> Pos1 and Pos2 */ -/* Store the carry generated in position 2 for Pos 3 */ - lhui r11, r1, 36 /* Pos2 */ - mul r9, r22, r27 /* C * H */ - mul r10, r23, r26 /* D * G */ - add r9, r9, r10 - addc r12, r0, r0 - add r9, r9, r11 - addc r12, r12, r0 /* Store the Carry */ - shi r9, r1, 36 /* Store Pos2 */ - swi r9, r1, 32 - lhui r11, r1, 32 - shi r11, r1, 34 /* Store Pos1 */ - -/* Hi (Store2) + B * H + C * G + D * F ==> Store3 ==> Pos0 and Pos1 */ - mul r9, r21, r27 /* B * H */ - mul r10, r22, r26 /* C * G */ - mul r7, r23, r25 /* D * F */ - add r9, r9, r11 - add r9, r9, r10 - add r9, r9, r7 - swi r9, r1, 32 /* Pos0 and Pos1 */ - -/* Hi (Store3) + A * H + B * G + C * F + D * E ==> Store3 ==> Pos0 */ - lhui r11, r1, 32 /* Pos0 */ - mul r9, r20, r27 /* A * H */ - mul r10, r21, r26 /* B * G */ - mul r7, r22, r25 /* C * F */ - mul r8, r23, r24 /* D * E */ - add r9, r9, r11 - add r9, r9, r10 - add r9, r9, r7 - add r9, r9, r8 - sext16 r9, r9 /* Sign extend the MSB */ - shi r9, r1, 32 - -/* Move results to r3 and r4 */ - lhui r3, r1, 32 - add r3, r3, r12 - shi r3, r1, 32 - lwi r3, r1, 32 /* Hi Part */ - lwi r4, r1, 36 /* Lo Part */ - -/* Restore Callee saved registers */ - lw r20, r1, r0 - lwi r21, r1, 4 - lwi r22, r1, 8 - lwi r23, r1, 12 - lwi r24, r1, 16 - lwi r25, r1, 20 - lwi r26, r1, 24 - lwi r27, r1, 28 - -/* Restore Frame and return */ - rtsd r15, 8 - addi r1, r1, 40 - -.size __muldi3, . - __muldi3 -.end __muldi3 diff --git a/arch/microblaze/lib/muldi3.c b/arch/microblaze/lib/muldi3.c new file mode 100644 index 000000000000..d4860e154d29 --- /dev/null +++ b/arch/microblaze/lib/muldi3.c @@ -0,0 +1,60 @@ +#include <linux/module.h> + +#include "libgcc.h" + +#define DWtype long long +#define UWtype unsigned long +#define UHWtype unsigned short + +#define W_TYPE_SIZE 32 + +#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2)) +#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1)) +#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2)) + +/* If we still don't have umul_ppmm, define it using plain C. */ +#if !defined(umul_ppmm) +#define umul_ppmm(w1, w0, u, v) \ + do { \ + UWtype __x0, __x1, __x2, __x3; \ + UHWtype __ul, __vl, __uh, __vh; \ + \ + __ul = __ll_lowpart(u); \ + __uh = __ll_highpart(u); \ + __vl = __ll_lowpart(v); \ + __vh = __ll_highpart(v); \ + \ + __x0 = (UWtype) __ul * __vl; \ + __x1 = (UWtype) __ul * __vh; \ + __x2 = (UWtype) __uh * __vl; \ + __x3 = (UWtype) __uh * __vh; \ + \ + __x1 += __ll_highpart(__x0); /* this can't give carry */\ + __x1 += __x2; /* but this indeed can */ \ + if (__x1 < __x2) /* did we get it? */ \ + __x3 += __ll_B; /* yes, add it in the proper pos */ \ + \ + (w1) = __x3 + __ll_highpart(__x1); \ + (w0) = __ll_lowpart(__x1) * __ll_B + __ll_lowpart(__x0);\ + } while (0) +#endif + +#if !defined(__umulsidi3) +#define __umulsidi3(u, v) ({ \ + DWunion __w; \ + umul_ppmm(__w.s.high, __w.s.low, u, v); \ + __w.ll; \ + }) +#endif + +DWtype __muldi3(DWtype u, DWtype v) +{ + const DWunion uu = {.ll = u}; + const DWunion vv = {.ll = v}; + DWunion w = {.ll = __umulsidi3(uu.s.low, vv.s.low)}; + + w.s.high += ((UWtype) uu.s.low * (UWtype) vv.s.high + + (UWtype) uu.s.high * (UWtype) vv.s.low); + + return w.ll; +} |