diff options
Diffstat (limited to 'arch/mips/alchemy')
| -rw-r--r-- | arch/mips/alchemy/Kconfig | 24 | ||||
| -rw-r--r-- | arch/mips/alchemy/Platform | 16 | ||||
| -rw-r--r-- | arch/mips/alchemy/board-gpr.c | 4 | ||||
| -rw-r--r-- | arch/mips/alchemy/board-mtx1.c | 4 | ||||
| -rw-r--r-- | arch/mips/alchemy/common/setup.c | 10 | ||||
| -rw-r--r-- | arch/mips/alchemy/common/sleeper.S | 6 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/Makefile | 4 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/db1000.c | 54 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/db1200.c | 78 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/db1300.c | 40 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/db1550.c | 10 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/db1xxx.c (renamed from arch/mips/alchemy/devboards/db1235.c) | 41 |
12 files changed, 193 insertions, 98 deletions
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 7032ac7ecd1b..b9628983d620 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -16,36 +16,29 @@ config ALCHEMY_GPIO_INDIRECT choice prompt "Machine type" depends on MIPS_ALCHEMY - default MIPS_DB1000 + default MIPS_DB1XXX config MIPS_MTX1 bool "4G Systems MTX-1 board" - select DMA_NONCOHERENT select HW_HAS_PCI select ALCHEMY_GPIOINT_AU1000 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK -config MIPS_DB1000 - bool "Alchemy DB1000/DB1500/DB1100 PB1500/1100 boards" - select ALCHEMY_GPIOINT_AU1000 - select DMA_NONCOHERENT - select HW_HAS_PCI - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - -config MIPS_DB1235 - bool "Alchemy DB1200/PB1200/DB1300/DB1550/PB1550 boards" +config MIPS_DB1XXX + bool "Alchemy DB1XXX / PB1XXX boards" select ARCH_REQUIRE_GPIOLIB select HW_HAS_PCI - select DMA_COHERENT select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK + help + Select this option if you have one of the following Alchemy + development boards: DB1000 DB1500 DB1100 DB1550 DB1200 DB1300 + PB1500 PB1100 PB1550 PB1200 + Board type is autodetected during boot. config MIPS_XXS1500 bool "MyCable XXS1500 board" - select DMA_NONCOHERENT select ALCHEMY_GPIOINT_AU1000 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK @@ -54,7 +47,6 @@ config MIPS_GPR bool "Trapeze ITS GPR board" select ALCHEMY_GPIOINT_AU1000 select HW_HAS_PCI - select DMA_NONCOHERENT select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform index b3afcdd8d77a..33c9da3b077b 100644 --- a/arch/mips/alchemy/Platform +++ b/arch/mips/alchemy/Platform @@ -5,18 +5,12 @@ platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/common/ # -# AMD Alchemy Db1000/Db1500/Pb1500/Db1100/Pb1100 eval boards +# AMD Alchemy Db1000/Db1500/Pb1500/Db1100/Pb1100 +# Db1550/Pb1550/Db1200/Pb1200/Db1300 # -platform-$(CONFIG_MIPS_DB1000) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_DB1000) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 -load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000 - -# -# AMD Alchemy Db1200/Pb1200/Db1550/Pb1550/Db1300 eval boards -# -platform-$(CONFIG_MIPS_DB1235) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_DB1235) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 -load-$(CONFIG_MIPS_DB1235) += 0xffffffff80100000 +platform-$(CONFIG_MIPS_DB1XXX) += alchemy/devboards/ +cflags-$(CONFIG_MIPS_DB1XXX) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 +load-$(CONFIG_MIPS_DB1XXX) += 0xffffffff80100000 # # 4G-Systems MTX-1 "MeshCube" wireless router diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c index 9edc35ff8cf1..acf9a2a37f5a 100644 --- a/arch/mips/alchemy/board-gpr.c +++ b/arch/mips/alchemy/board-gpr.c @@ -53,10 +53,8 @@ void __init prom_init(void) prom_init_cmdline(); memsize_str = prom_getenv("memsize"); - if (!memsize_str) + if (!memsize_str || kstrtoul(memsize_str, 0, &memsize)) memsize = 0x04000000; - else - strict_strtoul(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c index 9969dbab19e3..25a59a23547e 100644 --- a/arch/mips/alchemy/board-mtx1.c +++ b/arch/mips/alchemy/board-mtx1.c @@ -52,10 +52,8 @@ void __init prom_init(void) prom_init_cmdline(); memsize_str = prom_getenv("memsize"); - if (!memsize_str) + if (!memsize_str || kstrtoul(memsize_str, 0, &memsize)) memsize = 0x04000000; - else - strict_strtoul(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 62b4e7bbeab9..566a1743f685 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -30,6 +30,7 @@ #include <linux/jiffies.h> #include <linux/module.h> +#include <asm/dma-coherence.h> #include <asm/mipsregs.h> #include <asm/time.h> @@ -59,6 +60,15 @@ void __init plat_mem_setup(void) /* Clear to obtain best system bus performance */ clear_c0_config(1 << 19); /* Clear Config[OD] */ + hw_coherentio = 0; + coherentio = 1; + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + coherentio = 0; + } + board_setup(); /* board specific setup */ /* IO/MEM resources. */ diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S index 706d933e0085..c73d81270b42 100644 --- a/arch/mips/alchemy/common/sleeper.S +++ b/arch/mips/alchemy/common/sleeper.S @@ -95,7 +95,7 @@ LEAF(alchemy_sleep_au1000) /* cache following instructions, as memory gets put to sleep */ la t0, 1f - .set mips3 + .set arch=r4000 cache 0x14, 0(t0) cache 0x14, 32(t0) cache 0x14, 64(t0) @@ -121,7 +121,7 @@ LEAF(alchemy_sleep_au1550) /* cache following instructions, as memory gets put to sleep */ la t0, 1f - .set mips3 + .set arch=r4000 cache 0x14, 0(t0) cache 0x14, 32(t0) cache 0x14, 64(t0) @@ -163,7 +163,7 @@ LEAF(alchemy_sleep_au1300) la t1, 4f subu t2, t1, t0 - .set mips3 + .set arch=r4000 1: cache 0x14, 0(t0) subu t2, t2, 32 diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile index 15bf7306648b..9da3659a9d1c 100644 --- a/arch/mips/alchemy/devboards/Makefile +++ b/arch/mips/alchemy/devboards/Makefile @@ -2,7 +2,5 @@ # Alchemy Develboards # -obj-y += bcsr.o platform.o +obj-y += bcsr.o platform.o db1000.o db1200.o db1300.o db1550.o db1xxx.o obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_MIPS_DB1000) += db1000.o -obj-$(CONFIG_MIPS_DB1235) += db1235.o db1200.o db1300.o db1550.o diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c index 11f3ad20321c..92dd929d4057 100644 --- a/arch/mips/alchemy/devboards/db1000.c +++ b/arch/mips/alchemy/devboards/db1000.c @@ -41,42 +41,27 @@ #define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT) -struct pci_dev; +const char *get_system_type(void); -static const char *board_type_str(void) +int __init db1000_board_setup(void) { + /* initialize board register space */ + bcsr_init(DB1000_BCSR_PHYS_ADDR, + DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); + switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { case BCSR_WHOAMI_DB1000: - return "DB1000"; case BCSR_WHOAMI_DB1500: - return "DB1500"; case BCSR_WHOAMI_DB1100: - return "DB1100"; case BCSR_WHOAMI_PB1500: case BCSR_WHOAMI_PB1500R2: - return "PB1500"; case BCSR_WHOAMI_PB1100: - return "PB1100"; - default: - return "(unknown)"; + pr_info("AMD Alchemy %s Board\n", get_system_type()); + return 0; } + return -ENODEV; } -const char *get_system_type(void) -{ - return board_type_str(); -} - -void __init board_setup(void) -{ - /* initialize board register space */ - bcsr_init(DB1000_BCSR_PHYS_ADDR, - DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); - - printk(KERN_INFO "AMD Alchemy %s Board\n", board_type_str()); -} - - static int db1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) { if ((slot < 12) || (slot > 13) || pin == 0) @@ -114,17 +99,10 @@ static struct platform_device db1500_pci_host_dev = { .resource = alchemy_pci_host_res, }; -static int __init db1500_pci_init(void) +int __init db1500_pci_setup(void) { - int id = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); - if ((id == BCSR_WHOAMI_DB1500) || (id == BCSR_WHOAMI_PB1500) || - (id == BCSR_WHOAMI_PB1500R2)) - return platform_device_register(&db1500_pci_host_dev); - return 0; + return platform_device_register(&db1500_pci_host_dev); } -/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ -arch_initcall(db1500_pci_init); - static struct resource au1100_lcd_resources[] = { [0] = { @@ -513,7 +491,7 @@ static struct platform_device *db1100_devs[] = { &db1000_irda_dev, }; -static int __init db1000_dev_init(void) +int __init db1000_dev_setup(void) { int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); int c0, c1, d0, d1, s0, s1, flashsize = 32, twosocks = 1; @@ -534,13 +512,10 @@ static int __init db1000_dev_init(void) s0 = AU1100_GPIO1_INT; s1 = AU1100_GPIO4_INT; + gpio_request(19, "sd0_cd"); + gpio_request(20, "sd1_cd"); gpio_direction_input(19); /* sd0 cd# */ gpio_direction_input(20); /* sd1 cd# */ - gpio_direction_input(21); /* touch pendown# */ - gpio_direction_input(207); /* SPI MISO */ - gpio_direction_output(208, 0); /* SPI MOSI */ - gpio_direction_output(209, 1); /* SPI SCK */ - gpio_direction_output(210, 1); /* SPI CS# */ /* spi_gpio on SSI0 pins */ pfc = __raw_readl((void __iomem *)SYS_PINFUNC); @@ -626,4 +601,3 @@ static int __init db1000_dev_init(void) db1x_register_norflash(flashsize << 20, 4 /* 32bit */, F_SWAPPED); return 0; } -device_initcall(db1000_dev_init); diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index a84d98b8f96e..9e46667f2597 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -35,16 +35,63 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/smc91x.h> +#include <linux/ata_platform.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1100_mmc.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> +#include <asm/mach-au1x00/au1xxx_psc.h> #include <asm/mach-au1x00/au1200fb.h> #include <asm/mach-au1x00/au1550_spi.h> #include <asm/mach-db1x00/bcsr.h> -#include <asm/mach-db1x00/db1200.h> #include "platform.h" +#define BCSR_INT_IDE 0x0001 +#define BCSR_INT_ETH 0x0002 +#define BCSR_INT_PC0 0x0004 +#define BCSR_INT_PC0STSCHG 0x0008 +#define BCSR_INT_PC1 0x0010 +#define BCSR_INT_PC1STSCHG 0x0020 +#define BCSR_INT_DC 0x0040 +#define BCSR_INT_FLASHBUSY 0x0080 +#define BCSR_INT_PC0INSERT 0x0100 +#define BCSR_INT_PC0EJECT 0x0200 +#define BCSR_INT_PC1INSERT 0x0400 +#define BCSR_INT_PC1EJECT 0x0800 +#define BCSR_INT_SD0INSERT 0x1000 +#define BCSR_INT_SD0EJECT 0x2000 +#define BCSR_INT_SD1INSERT 0x4000 +#define BCSR_INT_SD1EJECT 0x8000 + +#define DB1200_IDE_PHYS_ADDR 0x18800000 +#define DB1200_IDE_REG_SHIFT 5 +#define DB1200_IDE_PHYS_LEN (16 << DB1200_IDE_REG_SHIFT) +#define DB1200_ETH_PHYS_ADDR 0x19000300 +#define DB1200_NAND_PHYS_ADDR 0x20000000 + +#define PB1200_IDE_PHYS_ADDR 0x0C800000 +#define PB1200_ETH_PHYS_ADDR 0x0D000300 +#define PB1200_NAND_PHYS_ADDR 0x1C000000 + +#define DB1200_INT_BEGIN (AU1000_MAX_INTR + 1) +#define DB1200_IDE_INT (DB1200_INT_BEGIN + 0) +#define DB1200_ETH_INT (DB1200_INT_BEGIN + 1) +#define DB1200_PC0_INT (DB1200_INT_BEGIN + 2) +#define DB1200_PC0_STSCHG_INT (DB1200_INT_BEGIN + 3) +#define DB1200_PC1_INT (DB1200_INT_BEGIN + 4) +#define DB1200_PC1_STSCHG_INT (DB1200_INT_BEGIN + 5) +#define DB1200_DC_INT (DB1200_INT_BEGIN + 6) +#define DB1200_FLASHBUSY_INT (DB1200_INT_BEGIN + 7) +#define DB1200_PC0_INSERT_INT (DB1200_INT_BEGIN + 8) +#define DB1200_PC0_EJECT_INT (DB1200_INT_BEGIN + 9) +#define DB1200_PC1_INSERT_INT (DB1200_INT_BEGIN + 10) +#define DB1200_PC1_EJECT_INT (DB1200_INT_BEGIN + 11) +#define DB1200_SD0_INSERT_INT (DB1200_INT_BEGIN + 12) +#define DB1200_SD0_EJECT_INT (DB1200_INT_BEGIN + 13) +#define PB1200_SD1_INSERT_INT (DB1200_INT_BEGIN + 14) +#define PB1200_SD1_EJECT_INT (DB1200_INT_BEGIN + 15) +#define DB1200_INT_END (DB1200_INT_BEGIN + 15) + const char *get_system_type(void); static int __init db1200_detect_board(void) @@ -89,6 +136,15 @@ int __init db1200_board_setup(void) return -ENODEV; whoami = bcsr_read(BCSR_WHOAMI); + switch (BCSR_WHOAMI_BOARD(whoami)) { + case BCSR_WHOAMI_PB1200_DDR1: + case BCSR_WHOAMI_PB1200_DDR2: + case BCSR_WHOAMI_DB1200: + break; + default: + return -ENODEV; + } + printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d" " Board-ID %d Daughtercard ID %d\n", get_system_type(), (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); @@ -275,32 +331,38 @@ static struct platform_device db1200_eth_dev = { /**********************************************************************/ +static struct pata_platform_info db1200_ide_info = { + .ioport_shift = DB1200_IDE_REG_SHIFT, +}; + +#define IDE_ALT_START (14 << DB1200_IDE_REG_SHIFT) static struct resource db1200_ide_res[] = { [0] = { .start = DB1200_IDE_PHYS_ADDR, - .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, + .end = DB1200_IDE_PHYS_ADDR + IDE_ALT_START - 1, .flags = IORESOURCE_MEM, }, [1] = { + .start = DB1200_IDE_PHYS_ADDR + IDE_ALT_START, + .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { .start = DB1200_IDE_INT, .end = DB1200_IDE_INT, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = AU1200_DSCR_CMD0_DMA_REQ1, - .end = AU1200_DSCR_CMD0_DMA_REQ1, - .flags = IORESOURCE_DMA, - }, }; static u64 au1200_ide_dmamask = DMA_BIT_MASK(32); static struct platform_device db1200_ide_dev = { - .name = "au1200-ide", + .name = "pata_platform", .id = 0, .dev = { .dma_mask = &au1200_ide_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1200_ide_info, }, .num_resources = ARRAY_SIZE(db1200_ide_res), .resource = db1200_ide_res, diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c index 6167e73eef9c..1aed6be4de10 100644 --- a/arch/mips/alchemy/devboards/db1300.c +++ b/arch/mips/alchemy/devboards/db1300.c @@ -26,12 +26,44 @@ #include <asm/mach-au1x00/au1200fb.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-au1x00/au1xxx_psc.h> -#include <asm/mach-db1x00/db1300.h> #include <asm/mach-db1x00/bcsr.h> #include <asm/mach-au1x00/prom.h> #include "platform.h" +/* FPGA (external mux) interrupt sources */ +#define DB1300_FIRST_INT (ALCHEMY_GPIC_INT_LAST + 1) +#define DB1300_IDE_INT (DB1300_FIRST_INT + 0) +#define DB1300_ETH_INT (DB1300_FIRST_INT + 1) +#define DB1300_CF_INT (DB1300_FIRST_INT + 2) +#define DB1300_VIDEO_INT (DB1300_FIRST_INT + 4) +#define DB1300_HDMI_INT (DB1300_FIRST_INT + 5) +#define DB1300_DC_INT (DB1300_FIRST_INT + 6) +#define DB1300_FLASH_INT (DB1300_FIRST_INT + 7) +#define DB1300_CF_INSERT_INT (DB1300_FIRST_INT + 8) +#define DB1300_CF_EJECT_INT (DB1300_FIRST_INT + 9) +#define DB1300_AC97_INT (DB1300_FIRST_INT + 10) +#define DB1300_AC97_PEN_INT (DB1300_FIRST_INT + 11) +#define DB1300_SD1_INSERT_INT (DB1300_FIRST_INT + 12) +#define DB1300_SD1_EJECT_INT (DB1300_FIRST_INT + 13) +#define DB1300_OTG_VBUS_OC_INT (DB1300_FIRST_INT + 14) +#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15) +#define DB1300_LAST_INT (DB1300_FIRST_INT + 15) + +/* SMSC9210 CS */ +#define DB1300_ETH_PHYS_ADDR 0x19000000 +#define DB1300_ETH_PHYS_END 0x197fffff + +/* ATA CS */ +#define DB1300_IDE_PHYS_ADDR 0x18800000 +#define DB1300_IDE_REG_SHIFT 5 +#define DB1300_IDE_PHYS_LEN (16 << DB1300_IDE_REG_SHIFT) + +/* NAND CS */ +#define DB1300_NAND_PHYS_ADDR 0x20000000 +#define DB1300_NAND_PHYS_END 0x20000fff + + static struct i2c_board_info db1300_i2c_devs[] __initdata = { { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec */ { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */ @@ -759,11 +791,15 @@ int __init db1300_board_setup(void) { unsigned short whoami; - db1300_gpio_config(); bcsr_init(DB1300_BCSR_PHYS_ADDR, DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS); whoami = bcsr_read(BCSR_WHOAMI); + if (BCSR_WHOAMI_BOARD(whoami) != BCSR_WHOAMI_DB1300) + return -ENODEV; + + db1300_gpio_config(); + printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t" "BoardID %d CPLD Rev %d DaughtercardID %d\n", BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami), diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c index 016cddacd7ea..bbd8d9884702 100644 --- a/arch/mips/alchemy/devboards/db1550.c +++ b/arch/mips/alchemy/devboards/db1550.c @@ -62,10 +62,16 @@ int __init db1550_board_setup(void) DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS); whoami = bcsr_read(BCSR_WHOAMI); /* PB1550 hexled offset differs */ - if ((BCSR_WHOAMI_BOARD(whoami) == BCSR_WHOAMI_PB1550_SDR) || - (BCSR_WHOAMI_BOARD(whoami) == BCSR_WHOAMI_PB1550_DDR)) + switch (BCSR_WHOAMI_BOARD(whoami)) { + case BCSR_WHOAMI_PB1550_SDR: + case BCSR_WHOAMI_PB1550_DDR: bcsr_init(PB1550_BCSR_PHYS_ADDR, PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS); + case BCSR_WHOAMI_DB1550: + break; + default: + return -ENODEV; + } pr_info("Alchemy/AMD %s Board, CPLD Rev %d Board-ID %d " \ "Daughtercard ID %d\n", get_system_type(), diff --git a/arch/mips/alchemy/devboards/db1235.c b/arch/mips/alchemy/devboards/db1xxx.c index bac19dc43d1d..2d47f951121a 100644 --- a/arch/mips/alchemy/devboards/db1235.c +++ b/arch/mips/alchemy/devboards/db1xxx.c @@ -1,12 +1,13 @@ /* - * DB1200/PB1200 / DB1550 / DB1300 board support. - * - * These 4 boards can reliably be supported in a single kernel image. + * Alchemy DB/PB1xxx board support. */ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-db1x00/bcsr.h> +int __init db1000_board_setup(void); +int __init db1000_dev_setup(void); +int __init db1500_pci_setup(void); int __init db1200_board_setup(void); int __init db1200_dev_setup(void); int __init db1300_board_setup(void); @@ -18,6 +19,17 @@ int __init db1550_pci_setup(int); static const char *board_type_str(void) { switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { + case BCSR_WHOAMI_DB1000: + return "DB1000"; + case BCSR_WHOAMI_DB1500: + return "DB1500"; + case BCSR_WHOAMI_DB1100: + return "DB1100"; + case BCSR_WHOAMI_PB1500: + case BCSR_WHOAMI_PB1500R2: + return "PB1500"; + case BCSR_WHOAMI_PB1100: + return "PB1100"; case BCSR_WHOAMI_PB1200_DDR1: case BCSR_WHOAMI_PB1200_DDR2: return "PB1200"; @@ -45,6 +57,11 @@ void __init board_setup(void) int ret; switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + ret = db1000_board_setup(); + break; case ALCHEMY_CPU_AU1550: ret = db1550_board_setup(); break; @@ -62,7 +79,7 @@ void __init board_setup(void) panic("cannot initialize board support"); } -int __init db1235_arch_init(void) +static int __init db1xxx_arch_init(void) { int id = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); if (id == BCSR_WHOAMI_DB1550) @@ -70,14 +87,24 @@ int __init db1235_arch_init(void) else if ((id == BCSR_WHOAMI_PB1550_SDR) || (id == BCSR_WHOAMI_PB1550_DDR)) return db1550_pci_setup(1); + else if ((id == BCSR_WHOAMI_DB1500) || (id == BCSR_WHOAMI_PB1500) || + (id == BCSR_WHOAMI_PB1500R2)) + return db1500_pci_setup(); return 0; } -arch_initcall(db1235_arch_init); +arch_initcall(db1xxx_arch_init); -int __init db1235_dev_init(void) +static int __init db1xxx_dev_init(void) { switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { + case BCSR_WHOAMI_DB1000: + case BCSR_WHOAMI_DB1500: + case BCSR_WHOAMI_DB1100: + case BCSR_WHOAMI_PB1500: + case BCSR_WHOAMI_PB1500R2: + case BCSR_WHOAMI_PB1100: + return db1000_dev_setup(); case BCSR_WHOAMI_PB1200_DDR1: case BCSR_WHOAMI_PB1200_DDR2: case BCSR_WHOAMI_DB1200: @@ -91,4 +118,4 @@ int __init db1235_dev_init(void) } return 0; } -device_initcall(db1235_dev_init); +device_initcall(db1xxx_dev_init); |