aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mips/basler/excite/excite_setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/basler/excite/excite_setup.c')
-rw-r--r--arch/mips/basler/excite/excite_setup.c302
1 files changed, 0 insertions, 302 deletions
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
deleted file mode 100644
index d66b3b8edf2a..000000000000
--- a/arch/mips/basler/excite/excite_setup.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * Copyright (C) 2004, 2005 by Basler Vision Technologies AG
- * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
- * Manish Lachwani.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <asm/bootinfo.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable-32.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-
-#define TITAN_UART_CLK 25000000
-
-#if 1
-/* normal serial port assignment */
-#define REGBASE_SER0 0x0208
-#define REGBASE_SER1 0x0238
-#define MASK_SER0 0x1
-#define MASK_SER1 0x2
-#else
-/* serial ports swapped */
-#define REGBASE_SER0 0x0238
-#define REGBASE_SER1 0x0208
-#define MASK_SER0 0x2
-#define MASK_SER1 0x1
-#endif
-
-unsigned long memsize;
-char modetty[30];
-unsigned int titan_irq = TITAN_IRQ;
-static void __iomem * ctl_regs;
-u32 unit_id;
-
-volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD);
-volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN);
-
-/* Protect access to shared GPI registers */
-DEFINE_SPINLOCK(titan_lock);
-int titan_irqflags;
-
-
-/*
- * The eXcite platform uses the alternate timer interrupt
- *
- * Fixme: At the time of this writing cevt-r4k.c doesn't yet know about how
- * to handle the alternate timer interrupt of the RM9000.
- */
-void __init plat_time_init(void)
-{
- const u32 modebit5 = ocd_readl(0x00e4);
- unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2;
- unsigned int div = ((modebit5 >> 16) & 0x1f) + 2;
-
- if (div == 33)
- div = 1;
- mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2;
-}
-
-static int __init excite_init_console(void)
-{
-#if defined(CONFIG_SERIAL_8250)
- static __initdata char serr[] =
- KERN_ERR "Serial port #%u setup failed\n";
- struct uart_port up;
-
- /* Take the DUART out of reset */
- titan_writel(0x00ff1cff, CPRR);
-
-#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
- /* Enable both ports */
- titan_writel(MASK_SER0 | MASK_SER1, UACFG);
-#else
- /* Enable port #0 only */
- titan_writel(MASK_SER0, UACFG);
-#endif
-
- /*
- * Set up serial port #0. Do not use autodetection; the result is
- * not what we want.
- */
- memset(&up, 0, sizeof(up));
- up.membase = (char *) titan_addr(REGBASE_SER0);
- up.irq = TITAN_IRQ;
- up.uartclk = TITAN_UART_CLK;
- up.regshift = 0;
- up.iotype = UPIO_RM9000;
- up.type = PORT_RM9000;
- up.flags = UPF_SHARE_IRQ;
- up.line = 0;
- if (early_serial_setup(&up))
- printk(serr, up.line);
-
-#if CONFIG_SERIAL_8250_NR_UARTS > 1
- /* And now for port #1. */
- up.membase = (char *) titan_addr(REGBASE_SER1);
- up.line = 1;
- if (early_serial_setup(&up))
- printk(serr, up.line);
-#endif /* CONFIG_SERIAL_8250_NR_UARTS > 1 */
-#else
- /* Leave the DUART in reset */
- titan_writel(0x00ff3cff, CPRR);
-#endif /* defined(CONFIG_SERIAL_8250) */
-
- return 0;
-}
-
-static int __init excite_platform_init(void)
-{
- unsigned int i;
- unsigned char buf[3];
- u8 reg;
- void __iomem * dpr;
-
- /* BIU buffer allocations */
- ocd_writel(8, CPURSLMT); /* CPU */
- titan_writel(4, CPGRWL); /* GPI / Ethernet */
-
- /* Map control registers located in FPGA */
- ctl_regs = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_SYSCTL, 16);
- if (!ctl_regs)
- panic("eXcite: failed to map platform control registers\n");
- memcpy_fromio(buf, ctl_regs + 2, ARRAY_SIZE(buf));
- unit_id = buf[0] | (buf[1] << 8) | (buf[2] << 16);
-
- /* Clear the reboot flag */
- dpr = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_DPR, 1);
- reg = __raw_readb(dpr);
- __raw_writeb(reg & 0x7f, dpr);
- iounmap(dpr);
-
- /* Interrupt controller setup */
- for (i = INTP0Status0; i < INTP0Status0 + 0x80; i += 0x10) {
- ocd_writel(0x00000000, i + 0x04);
- ocd_writel(0xffffffff, i + 0x0c);
- }
- ocd_writel(0x2, NMICONFIG);
-
- ocd_writel(0x1 << (TITAN_MSGINT % 0x20),
- INTP0Mask0 + (0x10 * (TITAN_MSGINT / 0x20)));
- ocd_writel((0x1 << (FPGA0_MSGINT % 0x20))
- | ocd_readl(INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))),
- INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20)));
- ocd_writel((0x1 << (FPGA1_MSGINT % 0x20))
- | ocd_readl(INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))),
- INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20)));
- ocd_writel((0x1 << (PHY_MSGINT % 0x20))
- | ocd_readl(INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))),
- INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20)));
-#if USB_IRQ < 10
- ocd_writel((0x1 << (USB_MSGINT % 0x20))
- | ocd_readl(INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))),
- INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20)));
-#endif
- /* Enable the packet FIFO, XDMA and XDMA arbiter */
- titan_writel(0x00ff18ff, CPRR);
-
- /*
- * Set up the PADMUX. Power down all ethernet slices,
- * they will be powered up and configured at device startup.
- */
- titan_writel(0x00878206, CPTC1R);
- titan_writel(0x00001100, CPTC0R); /* latch PADMUX, enable WCIMODE */
-
- /* Reset and enable the FIFO block */
- titan_writel(0x00000001, SDRXFCIE);
- titan_writel(0x00000001, SDTXFCIE);
- titan_writel(0x00000100, SDRXFCIE);
- titan_writel(0x00000000, SDTXFCIE);
-
- /*
- * Initialize the common interrupt shared by all components of
- * the GPI/Ethernet subsystem.
- */
- titan_writel((EXCITE_PHYS_OCD >> 12), CPCFG0);
- titan_writel(TITAN_MSGINT, CPCFG1);
-
- /*
- * XDMA configuration.
- * In order for the XDMA to be sharable among multiple drivers,
- * the setup must be done here in the platform. The reason is that
- * this setup can only be done while the XDMA is in reset. If this
- * were done in a driver, it would interrupt all other drivers
- * using the XDMA.
- */
- titan_writel(0x80021dff, GXCFG); /* XDMA reset */
- titan_writel(0x00000000, CPXCISRA);
- titan_writel(0x00000000, CPXCISRB); /* clear pending interrupts */
-#if defined(CONFIG_HIGHMEM)
-# error change for HIGHMEM support!
-#else
- titan_writel(0x00000000, GXDMADRPFX); /* buffer address prefix */
-#endif
- titan_writel(0, GXDMA_DESCADR);
-
- for (i = 0x5040; i <= 0x5300; i += 0x0040)
- titan_writel(0x80080000, i); /* reset channel */
-
- titan_writel((0x1 << 29) /* no sparse tx descr. */
- | (0x1 << 28) /* no sparse rx descr. */
- | (0x1 << 23) | (0x1 << 24) /* descriptor coherency */
- | (0x1 << 21) | (0x1 << 22) /* data coherency */
- | (0x1 << 17)
- | 0x1dff,
- GXCFG);
-
-#if defined(CONFIG_SMP)
-# error No SMP support
-#else
- /* All interrupts go to core #0 only. */
- titan_writel(0x1f007fff, CPDST0A);
- titan_writel(0x00000000, CPDST0B);
- titan_writel(0x0000ff3f, CPDST1A);
- titan_writel(0x00000000, CPDST1B);
- titan_writel(0x00ffffff, CPXDSTA);
- titan_writel(0x00000000, CPXDSTB);
-#endif
-
- /* Enable DUART interrupts, disable everything else. */
- titan_writel(0x04000000, CPGIG0ER);
- titan_writel(0x000000c0, CPGIG1ER);
-
- excite_procfs_init();
- return 0;
-}
-
-void __init plat_mem_setup(void)
-{
- volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000;
-
- /* Announce RAM to system */
- add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
-
- /* Set up the peripheral address map */
- *(boot_ocd_base + (LKB9 / sizeof(u32))) = 0;
- *(boot_ocd_base + (LKB10 / sizeof(u32))) = 0;
- *(boot_ocd_base + (LKB11 / sizeof(u32))) = 0;
- *(boot_ocd_base + (LKB12 / sizeof(u32))) = 0;
- wmb();
- *(boot_ocd_base + (LKB0 / sizeof(u32))) = EXCITE_PHYS_OCD >> 4;
- wmb();
-
- ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5);
- ocd_writel(((EXCITE_SIZE_TITAN >> 4) & 0x7fffff00) - 0x100, LKM5);
- ocd_writel((EXCITE_PHYS_SCRAM >> 4) | 0x1UL, LKB13);
- ocd_writel(((EXCITE_SIZE_SCRAM >> 4) & 0xffffff00) - 0x100, LKM13);
-
- /* Local bus slot #0 */
- ocd_writel(0x00040510, LDP0);
- ocd_writel((EXCITE_PHYS_BOOTROM >> 4) | 0x1UL, LKB9);
- ocd_writel(((EXCITE_SIZE_BOOTROM >> 4) & 0x03ffff00) - 0x100, LKM9);
-
- /* Local bus slot #2 */
- ocd_writel(0x00000330, LDP2);
- ocd_writel((EXCITE_PHYS_FPGA >> 4) | 0x1, LKB11);
- ocd_writel(((EXCITE_SIZE_FPGA >> 4) - 0x100) & 0x03ffff00, LKM11);
-
- /* Local bus slot #3 */
- ocd_writel(0x00123413, LDP3);
- ocd_writel((EXCITE_PHYS_NAND >> 4) | 0x1, LKB12);
- ocd_writel(((EXCITE_SIZE_NAND >> 4) - 0x100) & 0x03ffff00, LKM12);
-}
-
-
-
-console_initcall(excite_init_console);
-arch_initcall(excite_platform_init);
-
-EXPORT_SYMBOL(titan_lock);
-EXPORT_SYMBOL(titan_irqflags);
-EXPORT_SYMBOL(titan_irq);
-EXPORT_SYMBOL(ocd_base);
-EXPORT_SYMBOL(titan_base);