diff options
Diffstat (limited to 'arch/mips/boot')
-rw-r--r-- | arch/mips/boot/Makefile | 4 | ||||
-rw-r--r-- | arch/mips/boot/compressed/Makefile | 4 | ||||
-rw-r--r-- | arch/mips/boot/dts/ingenic/Makefile | 1 | ||||
-rw-r--r-- | arch/mips/boot/dts/ingenic/ci20.dts | 44 | ||||
-rw-r--r-- | arch/mips/boot/dts/ingenic/cu1000-neo.dts | 170 | ||||
-rw-r--r-- | arch/mips/boot/dts/ingenic/jz4740.dtsi | 17 | ||||
-rw-r--r-- | arch/mips/boot/dts/ingenic/jz4780.dtsi | 17 | ||||
-rw-r--r-- | arch/mips/boot/dts/ingenic/x1000.dtsi | 315 | ||||
-rw-r--r-- | arch/mips/boot/dts/qca/ar9331.dtsi | 119 | ||||
-rw-r--r-- | arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 13 | ||||
-rw-r--r-- | arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts | 8 | ||||
-rw-r--r-- | arch/mips/boot/dts/ralink/mt7628a.dtsi | 10 | ||||
-rw-r--r-- | arch/mips/boot/tools/Makefile | 2 |
13 files changed, 686 insertions, 38 deletions
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile index 528bd73d530a..a3da2c5d63c2 100644 --- a/arch/mips/boot/Makefile +++ b/arch/mips/boot/Makefile @@ -21,7 +21,7 @@ endif drop-sections := .reginfo .mdebug .comment .note .pdr .options .MIPS.options strip-flags := $(addprefix --remove-section=,$(drop-sections)) -hostprogs-y := elf2ecoff +hostprogs := elf2ecoff suffix-y := bin suffix-$(CONFIG_KERNEL_BZIP2) := bz2 @@ -123,7 +123,7 @@ $(obj)/vmlinux.its.S: $(addprefix $(srctree)/arch/mips/$(PLATFORM)/,$(ITS_INPUTS targets += vmlinux.its targets += vmlinux.gz.its targets += vmlinux.bz2.its -targets += vmlinux.lzmo.its +targets += vmlinux.lzma.its targets += vmlinux.lzo.its quiet_cmd_cpp_its_S = ITS $@ diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index d859f079b771..0df0ee8a298d 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -84,7 +84,7 @@ $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE HOSTCFLAGS_calc_vmlinuz_load_addr.o += $(LINUXINCLUDE) # Calculate the load address of the compressed kernel image -hostprogs-y := calc_vmlinuz_load_addr +hostprogs := calc_vmlinuz_load_addr ifneq ($(zload-y),) VMLINUZ_LOAD_ADDRESS := $(zload-y) @@ -112,7 +112,7 @@ ifdef CONFIG_MACH_DECSTATION endif # elf2ecoff can only handle 32bit image -hostprogs-y += ../elf2ecoff +hostprogs += ../elf2ecoff ifdef CONFIG_32BIT VMLINUZ = vmlinuz diff --git a/arch/mips/boot/dts/ingenic/Makefile b/arch/mips/boot/dts/ingenic/Makefile index 9cc48441eb71..e1654291a7b0 100644 --- a/arch/mips/boot/dts/ingenic/Makefile +++ b/arch/mips/boot/dts/ingenic/Makefile @@ -2,5 +2,6 @@ dtb-$(CONFIG_JZ4740_QI_LB60) += qi_lb60.dtb dtb-$(CONFIG_JZ4770_GCW0) += gcw0.dtb dtb-$(CONFIG_JZ4780_CI20) += ci20.dtb +dtb-$(CONFIG_X1000_CU1000_NEO) += cu1000-neo.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 37b93166bf22..c340f947baa0 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -4,6 +4,8 @@ #include "jz4780.dtsi" #include <dt-bindings/clock/ingenic,tcu.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/regulator/active-semi,8865-regulator.h> / { compatible = "img,ci20", "ingenic,jz4780"; @@ -163,63 +165,71 @@ regulators { vddcore: SUDCDC1 { - regulator-name = "VDDCORE"; + regulator-name = "DCDC_REG1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; vddmem: SUDCDC2 { - regulator-name = "VDDMEM"; + regulator-name = "DCDC_REG2"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; vcc_33: SUDCDC3 { - regulator-name = "VCC33"; + regulator-name = "DCDC_REG3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vcc_50: SUDCDC4 { - regulator-name = "VCC50"; + regulator-name = "SUDCDC_REG4"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; vcc_25: LDO_REG5 { - regulator-name = "VCC25"; + regulator-name = "LDO_REG5"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; wifi_io: LDO_REG6 { - regulator-name = "WIFIIO"; + regulator-name = "LDO_REG6"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; vcc_28: LDO_REG7 { - regulator-name = "VCC28"; + regulator-name = "LDO_REG7"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; vcc_15: LDO_REG8 { - regulator-name = "VCC15"; + regulator-name = "LDO_REG8"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; - vcc_18: LDO_REG9 { - regulator-name = "VCC18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + vrtc_18: LDO_REG9 { + regulator-name = "LDO_REG9"; + /* Despite the datasheet stating 3.3V + * for REG9 and the driver expecting that, + * REG9 outputs 1.8V. + * Likely the CI20 uses a proprietary + * factory programmed chip variant. + * Since this is a simple on/off LDO the + * exact values do not matter. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; vcc_11: LDO_REG10 { - regulator-name = "VCC11"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + regulator-name = "LDO_REG10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; }; }; @@ -261,7 +271,9 @@ rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; - interrupts = <110>; + + interrupt-parent = <&gpf>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/mips/boot/dts/ingenic/cu1000-neo.dts b/arch/mips/boot/dts/ingenic/cu1000-neo.dts new file mode 100644 index 000000000000..03abd94acd84 --- /dev/null +++ b/arch/mips/boot/dts/ingenic/cu1000-neo.dts @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "x1000.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/ingenic,tcu.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "yna,cu1000-neo", "ingenic,x1000"; + model = "YSH & ATIL General Board CU Neo"; + + aliases { + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x04000000>; + }; + + wlan_pwrseq: msc1-pwrseq { + compatible = "mmc-pwrseq-simple"; + + clocks = <&lpoclk>; + clock-names = "ext_clock"; + + reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <200>; + + lpoclk: ap6212a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&exclk { + clock-frequency = <24000000>; +}; + +&tcu { + /* 1500 kHz for the system timer and clocksource */ + assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>; + assigned-clock-rates = <1500000>, <1500000>; + + /* Use channel #0 for the system timer channel #2 for the clocksource */ + ingenic,pwm-channels-mask = <0xfa>; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c0>; + + ads7830@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart2>; + + status = "okay"; +}; + +&mac { + phy-mode = "rmii"; + phy-handle = <&lan8720a>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_mac>; + + snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */ + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + + status = "okay"; +}; + +&mdio { + status = "okay"; + + lan8720a: ethernet-phy@0 { + compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&msc0 { + bus-width = <8>; + max-frequency = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_msc0>; + + non-removable; + + status = "okay"; +}; + +&msc1 { + bus-width = <4>; + max-frequency = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_msc1>; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + + mmc-pwrseq = <&wlan_pwrseq>; + + status = "okay"; + + ap6212a: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpc>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + brcm,drive-strength = <10>; + }; +}; + +&pinctrl { + pins_i2c0: i2c0 { + function = "i2c0"; + groups = "i2c0-data"; + bias-disable; + }; + + pins_uart2: uart2 { + function = "uart2"; + groups = "uart2-data-d"; + bias-disable; + }; + + pins_mac: mac { + function = "mac"; + groups = "mac"; + bias-disable; + }; + + pins_msc0: msc0 { + function = "mmc0"; + groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit"; + bias-disable; + }; + + pins_msc1: msc1 { + function = "mmc1"; + groups = "mmc1-1bit", "mmc1-4bit"; + bias-disable; + }; +}; diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi index 5accda2767be..a3301bab9231 100644 --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/clock/jz4740-cgu.h> +#include <dt-bindings/clock/ingenic,tcu.h> / { #address-cells = <1>; @@ -45,14 +46,6 @@ #clock-cells = <1>; }; - watchdog: watchdog@10002000 { - compatible = "ingenic,jz4740-watchdog"; - reg = <0x10002000 0x10>; - - clocks = <&cgu JZ4740_CLK_RTC>; - clock-names = "rtc"; - }; - tcu: timer@10002000 { compatible = "ingenic,jz4740-tcu", "simple-mfd"; reg = <0x10002000 0x1000>; @@ -73,6 +66,14 @@ interrupt-parent = <&intc>; interrupts = <23 22 21>; + + watchdog: watchdog@0 { + compatible = "ingenic,jz4740-watchdog"; + reg = <0x0 0xc>; + + clocks = <&tcu TCU_CLK_WDT>; + clock-names = "wdt"; + }; }; rtc_dev: rtc@10003000 { diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi index f928329b034b..bb89653d16a3 100644 --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/clock/jz4780-cgu.h> +#include <dt-bindings/clock/ingenic,tcu.h> #include <dt-bindings/dma/jz4780-dma.h> / { @@ -67,6 +68,14 @@ interrupt-parent = <&intc>; interrupts = <27 26 25>; + + watchdog: watchdog@0 { + compatible = "ingenic,jz4780-watchdog"; + reg = <0x0 0xc>; + + clocks = <&tcu TCU_CLK_WDT>; + clock-names = "wdt"; + }; }; rtc_dev: rtc@10003000 { @@ -348,14 +357,6 @@ status = "disabled"; }; - watchdog: watchdog@10002000 { - compatible = "ingenic,jz4780-watchdog"; - reg = <0x10002000 0x10>; - - clocks = <&cgu JZ4780_CLK_RTCLK>; - clock-names = "rtc"; - }; - nemc: nemc@13410000 { compatible = "ingenic,jz4780-nemc"; reg = <0x13410000 0x10000>; diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi new file mode 100644 index 000000000000..147f7d5c243a --- /dev/null +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/clock/ingenic,tcu.h> +#include <dt-bindings/clock/x1000-cgu.h> +#include <dt-bindings/dma/x1000-dma.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ingenic,x1000", "ingenic,x1000e"; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + intc: interrupt-controller@10001000 { + compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc"; + reg = <0x10001000 0x50>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + exclk: ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + rtclk: rtc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + cgu: x1000-cgu@10000000 { + compatible = "ingenic,x1000-cgu"; + reg = <0x10000000 0x100>; + + #clock-cells = <1>; + + clocks = <&exclk>, <&rtclk>; + clock-names = "ext", "rtc"; + }; + + tcu: timer@10002000 { + compatible = "ingenic,x1000-tcu", + "ingenic,jz4770-tcu", + "simple-mfd"; + reg = <0x10002000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10002000 0x1000>; + + #clock-cells = <1>; + + clocks = <&cgu X1000_CLK_RTCLK + &cgu X1000_CLK_EXCLK + &cgu X1000_CLK_PCLK>; + clock-names = "rtc", "ext", "pclk"; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&intc>; + interrupts = <27 26 25>; + + wdt: watchdog@0 { + compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog"; + reg = <0x0 0x10>; + + clocks = <&tcu TCU_CLK_WDT>; + clock-names = "wdt"; + }; + }; + + rtc: rtc@10003000 { + compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc"; + reg = <0x10003000 0x4c>; + + interrupt-parent = <&intc>; + interrupts = <32>; + + clocks = <&cgu X1000_CLK_RTCLK>; + clock-names = "rtc"; + }; + + pinctrl: pin-controller@10010000 { + compatible = "ingenic,x1000-pinctrl"; + reg = <0x10010000 0x800>; + #address-cells = <1>; + #size-cells = <0>; + + gpa: gpio@0 { + compatible = "ingenic,x1000-gpio"; + reg = <0>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <17>; + }; + + gpb: gpio@1 { + compatible = "ingenic,x1000-gpio"; + reg = <1>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 32 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <16>; + }; + + gpc: gpio@2 { + compatible = "ingenic,x1000-gpio"; + reg = <2>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 64 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <15>; + }; + + gpd: gpio@3 { + compatible = "ingenic,x1000-gpio"; + reg = <3>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 96 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <14>; + }; + }; + + i2c0: i2c-controller@10050000 { + compatible = "ingenic,x1000-i2c"; + reg = <0x10050000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <60>; + + clocks = <&cgu X1000_CLK_I2C0>; + + status = "disabled"; + }; + + i2c1: i2c-controller@10051000 { + compatible = "ingenic,x1000-i2c"; + reg = <0x10051000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <59>; + + clocks = <&cgu X1000_CLK_I2C1>; + + status = "disabled"; + }; + + i2c2: i2c-controller@10052000 { + compatible = "ingenic,x1000-i2c"; + reg = <0x10052000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <58>; + + clocks = <&cgu X1000_CLK_I2C2>; + + status = "disabled"; + }; + + uart0: serial@10030000 { + compatible = "ingenic,x1000-uart"; + reg = <0x10030000 0x100>; + + interrupt-parent = <&intc>; + interrupts = <51>; + + clocks = <&exclk>, <&cgu X1000_CLK_UART0>; + clock-names = "baud", "module"; + + status = "disabled"; + }; + + uart1: serial@10031000 { + compatible = "ingenic,x1000-uart"; + reg = <0x10031000 0x100>; + + interrupt-parent = <&intc>; + interrupts = <50>; + + clocks = <&exclk>, <&cgu X1000_CLK_UART1>; + clock-names = "baud", "module"; + + status = "disabled"; + }; + + uart2: serial@10032000 { + compatible = "ingenic,x1000-uart"; + reg = <0x10032000 0x100>; + + interrupt-parent = <&intc>; + interrupts = <49>; + + clocks = <&exclk>, <&cgu X1000_CLK_UART2>; + clock-names = "baud", "module"; + + status = "disabled"; + }; + + pdma: dma-controller@13420000 { + compatible = "ingenic,x1000-dma"; + reg = <0x13420000 0x400 + 0x13421000 0x40>; + #dma-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <10>; + + clocks = <&cgu X1000_CLK_PDMA>; + }; + + mac: ethernet@134b0000 { + compatible = "ingenic,x1000-mac", "snps,dwmac"; + reg = <0x134b0000 0x2000>; + + interrupt-parent = <&intc>; + interrupts = <55>; + interrupt-names = "macirq"; + + clocks = <&cgu X1000_CLK_MAC>; + clock-names = "stmmaceth"; + + status = "disabled"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + msc0: mmc@13450000 { + compatible = "ingenic,x1000-mmc"; + reg = <0x13450000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <37>; + + clocks = <&cgu X1000_CLK_MSC0>; + clock-names = "mmc"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + + dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>, + <&pdma X1000_DMA_MSC0_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + + msc1: mmc@13460000 { + compatible = "ingenic,x1000-mmc"; + reg = <0x13460000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <36>; + + clocks = <&cgu X1000_CLK_MSC1>; + clock-names = "mmc"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + + dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>, + <&pdma X1000_DMA_MSC1_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; +}; diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi index 5cfc9d347826..8f5aed760abb 100644 --- a/arch/mips/boot/dts/qca/ar9331.dtsi +++ b/arch/mips/boot/dts/qca/ar9331.dtsi @@ -126,6 +126,9 @@ clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; clock-names = "eth", "mdio"; + phy-mode = "mii"; + phy-handle = <&phy_port4>; + status = "disabled"; }; @@ -133,13 +136,127 @@ compatible = "qca,ar9330-eth"; reg = <0x1a000000 0x200>; interrupts = <5>; - resets = <&rst 13>, <&rst 23>; reset-names = "mac", "mdio"; clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; clock-names = "eth", "mdio"; + phy-mode = "gmii"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch10: switch@10 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "qca,ar9331-switch"; + reg = <0x10>; + resets = <&rst 8>; + reset-names = "switch"; + + interrupt-parent = <&miscintc>; + interrupts = <12>; + + interrupt-controller; + #interrupt-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch_port0: port@0 { + reg = <0x0>; + label = "cpu"; + ethernet = <ð1>; + + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch_port1: port@1 { + reg = <0x1>; + phy-handle = <&phy_port0>; + phy-mode = "internal"; + + status = "disabled"; + }; + + switch_port2: port@2 { + reg = <0x2>; + phy-handle = <&phy_port1>; + phy-mode = "internal"; + + status = "disabled"; + }; + + switch_port3: port@3 { + reg = <0x3>; + phy-handle = <&phy_port2>; + phy-mode = "internal"; + + status = "disabled"; + }; + + switch_port4: port@4 { + reg = <0x4>; + phy-handle = <&phy_port3>; + phy-mode = "internal"; + + status = "disabled"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&switch10>; + + phy_port0: phy@0 { + reg = <0x0>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port1: phy@1 { + reg = <0x1>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port2: phy@2 { + reg = <0x2>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port3: phy@3 { + reg = <0x3>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port4: phy@4 { + reg = <0x4>; + interrupts = <0>; + status = "disabled"; + }; + }; + }; + }; }; usb: usb@1b000100 { diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts index 77bab823eb3b..0f2b20044834 100644 --- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts +++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts @@ -84,3 +84,16 @@ ð1 { status = "okay"; }; + +&switch_port1 { + label = "lan0"; + status = "okay"; +}; + +&phy_port0 { + status = "okay"; +}; + +&phy_port4 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts index aa5caaa31104..6069b33cf09f 100644 --- a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts +++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts @@ -177,6 +177,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinmux_i2s_gpio>; /* GPIO0..3 */ + fifo-size = <8>; + tx-threshold = <8>; + rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>; }; @@ -195,3 +198,8 @@ &watchdog { status = "okay"; }; + +&wmac { + status = "okay"; + mediatek,mtd-eeprom = <&factory 0x0000>; +}; diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi index 742bcc1dc2e0..892e8ab863c5 100644 --- a/arch/mips/boot/dts/ralink/mt7628a.dtsi +++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi @@ -285,4 +285,14 @@ interrupt-parent = <&intc>; interrupts = <18>; }; + + wmac: wmac@10300000 { + compatible = "mediatek,mt7628-wmac"; + reg = <0x10300000 0x100000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + status = "disabled"; + }; }; diff --git a/arch/mips/boot/tools/Makefile b/arch/mips/boot/tools/Makefile index 5f8e737348eb..592e05a51a4a 100644 --- a/arch/mips/boot/tools/Makefile +++ b/arch/mips/boot/tools/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -hostprogs-y += relocs +hostprogs += relocs relocs-objs += relocs_32.o relocs-objs += relocs_64.o relocs-objs += relocs_main.o |