aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mips/kernel/cps-vec.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/kernel/cps-vec.S')
-rw-r--r--arch/mips/kernel/cps-vec.S328
1 files changed, 312 insertions, 16 deletions
diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
index f7a46db4b161..6f4f739dad96 100644
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@@ -14,19 +14,43 @@
#include <asm/asmmacro.h>
#include <asm/cacheops.h>
#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/pm.h>
-#define GCR_CL_COHERENCE_OFS 0x2008
+#define GCR_CL_COHERENCE_OFS 0x2008
+#define GCR_CL_ID_OFS 0x2028
+
+.extern mips_cm_base
+
+.set noreorder
+
+ /*
+ * Set dest to non-zero if the core supports the MT ASE, else zero. If
+ * MT is not supported then branch to nomt.
+ */
+ .macro has_mt dest, nomt
+ mfc0 \dest, CP0_CONFIG
+ bgez \dest, \nomt
+ mfc0 \dest, CP0_CONFIG, 1
+ bgez \dest, \nomt
+ mfc0 \dest, CP0_CONFIG, 2
+ bgez \dest, \nomt
+ mfc0 \dest, CP0_CONFIG, 3
+ andi \dest, \dest, MIPS_CONF3_MT
+ beqz \dest, \nomt
+ .endm
.section .text.cps-vec
.balign 0x1000
-.set noreorder
LEAF(mips_cps_core_entry)
/*
- * These first 8 bytes will be patched by cps_smp_setup to load the
- * base address of the CM GCRs into register v1.
+ * These first 12 bytes will be patched by cps_smp_setup to load the
+ * base address of the CM GCRs into register v1 and the CCA to use into
+ * register s0.
*/
.quad 0
+ .word 0
/* Check whether we're here due to an NMI */
mfc0 k0, CP0_STATUS
@@ -117,10 +141,11 @@ icache_done:
add a0, a0, t0
dcache_done:
- /* Set Kseg0 cacheable, coherent, write-back, write-allocate */
+ /* Set Kseg0 CCA to that in s0 */
mfc0 t0, CP0_CONFIG
ori t0, 0x7
- xori t0, 0x2
+ xori t0, 0x7
+ or t0, t0, s0
mtc0 t0, CP0_CONFIG
ehb
@@ -134,21 +159,24 @@ dcache_done:
jr t0
nop
-1: /* We're up, cached & coherent */
+ /*
+ * We're up, cached & coherent. Perform any further required core-level
+ * initialisation.
+ */
+1: jal mips_cps_core_init
+ nop
/*
- * TODO: We should check the VPE number we intended to boot here, and
- * if non-zero we should start that VPE and stop this one. For
- * the moment this doesn't matter since CPUs are brought up
- * sequentially and in order, but once hotplug is implemented
- * this will need revisiting.
+ * Boot any other VPEs within this core that should be online, and
+ * deactivate this VPE if it should be offline.
*/
+ jal mips_cps_boot_vpes
+ nop
/* Off we go! */
- la t0, mips_cps_bootcfg
- lw t1, BOOTCFG_PC(t0)
- lw gp, BOOTCFG_GP(t0)
- lw sp, BOOTCFG_SP(t0)
+ lw t1, VPEBOOTCFG_PC(v0)
+ lw gp, VPEBOOTCFG_GP(v0)
+ lw sp, VPEBOOTCFG_SP(v0)
jr t1
nop
END(mips_cps_core_entry)
@@ -189,3 +217,271 @@ LEAF(excep_ejtag)
jr k0
nop
END(excep_ejtag)
+
+LEAF(mips_cps_core_init)
+#ifdef CONFIG_MIPS_MT
+ /* Check that the core implements the MT ASE */
+ has_mt t0, 3f
+ nop
+
+ .set push
+ .set mt
+
+ /* Only allow 1 TC per VPE to execute... */
+ dmt
+
+ /* ...and for the moment only 1 VPE */
+ dvpe
+ la t1, 1f
+ jr.hb t1
+ nop
+
+ /* Enter VPE configuration state */
+1: mfc0 t0, CP0_MVPCONTROL
+ ori t0, t0, MVPCONTROL_VPC
+ mtc0 t0, CP0_MVPCONTROL
+
+ /* Retrieve the number of VPEs within the core */
+ mfc0 t0, CP0_MVPCONF0
+ srl t0, t0, MVPCONF0_PVPE_SHIFT
+ andi t0, t0, (MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT)
+ addi t7, t0, 1
+
+ /* If there's only 1, we're done */
+ beqz t0, 2f
+ nop
+
+ /* Loop through each VPE within this core */
+ li t5, 1
+
+1: /* Operate on the appropriate TC */
+ mtc0 t5, CP0_VPECONTROL
+ ehb
+
+ /* Bind TC to VPE (1:1 TC:VPE mapping) */
+ mttc0 t5, CP0_TCBIND
+
+ /* Set exclusive TC, non-active, master */
+ li t0, VPECONF0_MVP
+ sll t1, t5, VPECONF0_XTC_SHIFT
+ or t0, t0, t1
+ mttc0 t0, CP0_VPECONF0
+
+ /* Set TC non-active, non-allocatable */
+ mttc0 zero, CP0_TCSTATUS
+
+ /* Set TC halted */
+ li t0, TCHALT_H
+ mttc0 t0, CP0_TCHALT
+
+ /* Next VPE */
+ addi t5, t5, 1
+ slt t0, t5, t7
+ bnez t0, 1b
+ nop
+
+ /* Leave VPE configuration state */
+2: mfc0 t0, CP0_MVPCONTROL
+ xori t0, t0, MVPCONTROL_VPC
+ mtc0 t0, CP0_MVPCONTROL
+
+3: .set pop
+#endif
+ jr ra
+ nop
+ END(mips_cps_core_init)
+
+LEAF(mips_cps_boot_vpes)
+ /* Retrieve CM base address */
+ la t0, mips_cm_base
+ lw t0, 0(t0)
+
+ /* Calculate a pointer to this cores struct core_boot_config */
+ lw t0, GCR_CL_ID_OFS(t0)
+ li t1, COREBOOTCFG_SIZE
+ mul t0, t0, t1
+ la t1, mips_cps_core_bootcfg
+ lw t1, 0(t1)
+ addu t0, t0, t1
+
+ /* Calculate this VPEs ID. If the core doesn't support MT use 0 */
+ has_mt t6, 1f
+ li t9, 0
+
+ /* Find the number of VPEs present in the core */
+ mfc0 t1, CP0_MVPCONF0
+ srl t1, t1, MVPCONF0_PVPE_SHIFT
+ andi t1, t1, MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT
+ addi t1, t1, 1
+
+ /* Calculate a mask for the VPE ID from EBase.CPUNum */
+ clz t1, t1
+ li t2, 31
+ subu t1, t2, t1
+ li t2, 1
+ sll t1, t2, t1
+ addiu t1, t1, -1
+
+ /* Retrieve the VPE ID from EBase.CPUNum */
+ mfc0 t9, $15, 1
+ and t9, t9, t1
+
+1: /* Calculate a pointer to this VPEs struct vpe_boot_config */
+ li t1, VPEBOOTCFG_SIZE
+ mul v0, t9, t1
+ lw t7, COREBOOTCFG_VPECONFIG(t0)
+ addu v0, v0, t7
+
+#ifdef CONFIG_MIPS_MT
+
+ /* If the core doesn't support MT then return */
+ bnez t6, 1f
+ nop
+ jr ra
+ nop
+
+ .set push
+ .set mt
+
+1: /* Enter VPE configuration state */
+ dvpe
+ la t1, 1f
+ jr.hb t1
+ nop
+1: mfc0 t1, CP0_MVPCONTROL
+ ori t1, t1, MVPCONTROL_VPC
+ mtc0 t1, CP0_MVPCONTROL
+ ehb
+
+ /* Loop through each VPE */
+ lw t6, COREBOOTCFG_VPEMASK(t0)
+ move t8, t6
+ li t5, 0
+
+ /* Check whether the VPE should be running. If not, skip it */
+1: andi t0, t6, 1
+ beqz t0, 2f
+ nop
+
+ /* Operate on the appropriate TC */
+ mfc0 t0, CP0_VPECONTROL
+ ori t0, t0, VPECONTROL_TARGTC
+ xori t0, t0, VPECONTROL_TARGTC
+ or t0, t0, t5
+ mtc0 t0, CP0_VPECONTROL
+ ehb
+
+ /* Skip the VPE if its TC is not halted */
+ mftc0 t0, CP0_TCHALT
+ beqz t0, 2f
+ nop
+
+ /* Calculate a pointer to the VPEs struct vpe_boot_config */
+ li t0, VPEBOOTCFG_SIZE
+ mul t0, t0, t5
+ addu t0, t0, t7
+
+ /* Set the TC restart PC */
+ lw t1, VPEBOOTCFG_PC(t0)
+ mttc0 t1, CP0_TCRESTART
+
+ /* Set the TC stack pointer */
+ lw t1, VPEBOOTCFG_SP(t0)
+ mttgpr t1, sp
+
+ /* Set the TC global pointer */
+ lw t1, VPEBOOTCFG_GP(t0)
+ mttgpr t1, gp
+
+ /* Copy config from this VPE */
+ mfc0 t0, CP0_CONFIG
+ mttc0 t0, CP0_CONFIG
+
+ /* Ensure no software interrupts are pending */
+ mttc0 zero, CP0_CAUSE
+ mttc0 zero, CP0_STATUS
+
+ /* Set TC active, not interrupt exempt */
+ mftc0 t0, CP0_TCSTATUS
+ li t1, ~TCSTATUS_IXMT
+ and t0, t0, t1
+ ori t0, t0, TCSTATUS_A
+ mttc0 t0, CP0_TCSTATUS
+
+ /* Clear the TC halt bit */
+ mttc0 zero, CP0_TCHALT
+
+ /* Set VPE active */
+ mftc0 t0, CP0_VPECONF0
+ ori t0, t0, VPECONF0_VPA
+ mttc0 t0, CP0_VPECONF0
+
+ /* Next VPE */
+2: srl t6, t6, 1
+ addi t5, t5, 1
+ bnez t6, 1b
+ nop
+
+ /* Leave VPE configuration state */
+ mfc0 t1, CP0_MVPCONTROL
+ xori t1, t1, MVPCONTROL_VPC
+ mtc0 t1, CP0_MVPCONTROL
+ ehb
+ evpe
+
+ /* Check whether this VPE is meant to be running */
+ li t0, 1
+ sll t0, t0, t9
+ and t0, t0, t8
+ bnez t0, 2f
+ nop
+
+ /* This VPE should be offline, halt the TC */
+ li t0, TCHALT_H
+ mtc0 t0, CP0_TCHALT
+ la t0, 1f
+1: jr.hb t0
+ nop
+
+2: .set pop
+
+#endif /* CONFIG_MIPS_MT */
+
+ /* Return */
+ jr ra
+ nop
+ END(mips_cps_boot_vpes)
+
+#if defined(CONFIG_MIPS_CPS_PM) && defined(CONFIG_CPU_PM)
+
+ /* Calculate a pointer to this CPUs struct mips_static_suspend_state */
+ .macro psstate dest
+ .set push
+ .set noat
+ lw $1, TI_CPU(gp)
+ sll $1, $1, LONGLOG
+ la \dest, __per_cpu_offset
+ addu $1, $1, \dest
+ lw $1, 0($1)
+ la \dest, cps_cpu_state
+ addu \dest, \dest, $1
+ .set pop
+ .endm
+
+LEAF(mips_cps_pm_save)
+ /* Save CPU state */
+ SUSPEND_SAVE_REGS
+ psstate t1
+ SUSPEND_SAVE_STATIC
+ jr v0
+ nop
+ END(mips_cps_pm_save)
+
+LEAF(mips_cps_pm_restore)
+ /* Restore CPU state */
+ psstate t1
+ RESUME_RESTORE_STATIC
+ RESUME_RESTORE_REGS_RETURN
+ END(mips_cps_pm_restore)
+
+#endif /* CONFIG_MIPS_CPS_PM && CONFIG_CPU_PM */