diff options
Diffstat (limited to 'arch/mips/lantiq')
| -rw-r--r-- | arch/mips/lantiq/Kconfig | 4 | ||||
| -rw-r--r-- | arch/mips/lantiq/dts/Makefile | 3 | ||||
| -rw-r--r-- | arch/mips/lantiq/prom.c | 5 | ||||
| -rw-r--r-- | arch/mips/lantiq/xway/Makefile | 2 | ||||
| -rw-r--r-- | arch/mips/lantiq/xway/dma.c | 15 | ||||
| -rw-r--r-- | arch/mips/lantiq/xway/reset.c | 58 | ||||
| -rw-r--r-- | arch/mips/lantiq/xway/sysctrl.c | 4 | ||||
| -rw-r--r-- | arch/mips/lantiq/xway/xrx200_phy_fw.c | 97 |
8 files changed, 170 insertions, 18 deletions
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig index d84f361f1e45..c0021912131e 100644 --- a/arch/mips/lantiq/Kconfig +++ b/arch/mips/lantiq/Kconfig @@ -36,4 +36,8 @@ config PCI_LANTIQ bool "PCI Support" depends on SOC_XWAY && PCI +config XRX200_PHY_FW + bool "XRX200 PHY firmware loader" + depends on SOC_XWAY + endif diff --git a/arch/mips/lantiq/dts/Makefile b/arch/mips/lantiq/dts/Makefile index 674fca45f72d..6fa72dd641b2 100644 --- a/arch/mips/lantiq/dts/Makefile +++ b/arch/mips/lantiq/dts/Makefile @@ -1,4 +1 @@ obj-$(CONFIG_DT_EASY50712) := easy50712.dtb.o - -$(obj)/%.dtb: $(obj)/%.dts - $(call if_changed,dtc) diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c index 6cfd6117fbfd..9f9e875967aa 100644 --- a/arch/mips/lantiq/prom.c +++ b/arch/mips/lantiq/prom.c @@ -87,9 +87,6 @@ void __init device_tree_init(void) reserve_bootmem(base, size, BOOTMEM_DEFAULT); unflatten_device_tree(); - - /* free the space reserved for the dt blob */ - free_bootmem(base, size); } void __init prom_init(void) @@ -119,7 +116,7 @@ int __init plat_of_setup(void) sizeof(of_ids[0].compatible)); strncpy(of_ids[1].compatible, "simple-bus", sizeof(of_ids[1].compatible)); - return of_platform_bus_probe(NULL, of_ids, NULL); + return of_platform_populate(NULL, of_ids, NULL, NULL); } arch_initcall(plat_of_setup); diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile index 70a58c747bd0..7a13660d630d 100644 --- a/arch/mips/lantiq/xway/Makefile +++ b/arch/mips/lantiq/xway/Makefile @@ -1 +1,3 @@ obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o + +obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c index 55d2c4fa4714..6453962ac898 100644 --- a/arch/mips/lantiq/xway/dma.c +++ b/arch/mips/lantiq/xway/dma.c @@ -25,6 +25,7 @@ #include <lantiq_soc.h> #include <xway_dma.h> +#define LTQ_DMA_ID 0x08 #define LTQ_DMA_CTRL 0x10 #define LTQ_DMA_CPOLL 0x14 #define LTQ_DMA_CS 0x18 @@ -48,7 +49,7 @@ #define DMA_CLK_DIV4 BIT(6) /* polling clock divider */ #define DMA_2W_BURST BIT(1) /* 2 word burst length */ #define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */ -#define DMA_ETOP_ENDIANESS (0xf << 8) /* endianess swap etop channels */ +#define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */ #define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */ #define ltq_dma_r32(x) ltq_r32(ltq_dma_membase + (x)) @@ -191,10 +192,10 @@ ltq_dma_init_port(int p) switch (p) { case DMA_PORT_ETOP: /* - * Tell the DMA engine to swap the endianess of data frames and + * Tell the DMA engine to swap the endianness of data frames and * drop packets if the channel arbitration fails. */ - ltq_dma_w32_mask(0, DMA_ETOP_ENDIANESS | DMA_PDEN, + ltq_dma_w32_mask(0, DMA_ETOP_ENDIANNESS | DMA_PDEN, LTQ_DMA_PCTRL); break; @@ -214,6 +215,7 @@ ltq_dma_init(struct platform_device *pdev) { struct clk *clk; struct resource *res; + unsigned id; int i; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -243,7 +245,12 @@ ltq_dma_init(struct platform_device *pdev) ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL); ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); } - dev_info(&pdev->dev, "init done\n"); + + id = ltq_dma_r32(LTQ_DMA_ID); + dev_info(&pdev->dev, + "Init done - hw rev: %X, ports: %d, channels: %d\n", + id & 0x1f, (id >> 16) & 0xf, id >> 20); + return 0; } diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c index 22c55f73aa9d..544dbb7fb421 100644 --- a/arch/mips/lantiq/xway/reset.c +++ b/arch/mips/lantiq/xway/reset.c @@ -28,17 +28,24 @@ #define RCU_RST_REQ 0x0010 /* reset status register */ #define RCU_RST_STAT 0x0014 +/* vr9 gphy registers */ +#define RCU_GFS_ADD0_XRX200 0x0020 +#define RCU_GFS_ADD1_XRX200 0x0068 /* reboot bit */ +#define RCU_RD_GPHY0_XRX200 BIT(31) #define RCU_RD_SRST BIT(30) +#define RCU_RD_GPHY1_XRX200 BIT(29) + /* reset cause */ #define RCU_STAT_SHIFT 26 /* boot selection */ -#define RCU_BOOT_SEL_SHIFT 26 -#define RCU_BOOT_SEL_MASK 0x7 +#define RCU_BOOT_SEL(x) ((x >> 18) & 0x7) +#define RCU_BOOT_SEL_XRX200(x) (((x >> 17) & 0xf) | ((x >> 8) & 0x10)) /* remapped base addr of the reset control unit */ static void __iomem *ltq_rcu_membase; +static struct device_node *ltq_rcu_np; /* This function is used by the watchdog driver */ int ltq_reset_cause(void) @@ -52,7 +59,41 @@ EXPORT_SYMBOL_GPL(ltq_reset_cause); unsigned char ltq_boot_select(void) { u32 val = ltq_rcu_r32(RCU_RST_STAT); - return (val >> RCU_BOOT_SEL_SHIFT) & RCU_BOOT_SEL_MASK; + + if (of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) + return RCU_BOOT_SEL_XRX200(val); + + return RCU_BOOT_SEL(val); +} + +/* reset / boot a gphy */ +static struct ltq_xrx200_gphy_reset { + u32 rd; + u32 addr; +} xrx200_gphy[] = { + {RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200}, + {RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200}, +}; + +/* reset and boot a gphy. these phys only exist on xrx200 SoC */ +int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr) +{ + if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) { + dev_err(dev, "this SoC has no GPHY\n"); + return -EINVAL; + } + if (id > 1) { + dev_err(dev, "%u is an invalid gphy id\n", id); + return -EINVAL; + } + dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr); + + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd, + RCU_RST_REQ); + ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr); + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd, + RCU_RST_REQ); + return 0; } /* reset a io domain for u micro seconds */ @@ -85,14 +126,17 @@ static void ltq_machine_power_off(void) static int __init mips_reboot_setup(void) { struct resource res; - struct device_node *np = - of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway"); + + ltq_rcu_np = of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway"); + if (!ltq_rcu_np) + ltq_rcu_np = of_find_compatible_node(NULL, NULL, + "lantiq,rcu-xrx200"); /* check if all the reset register range is available */ - if (!np) + if (!ltq_rcu_np) panic("Failed to load reset resources from devicetree"); - if (of_address_to_resource(np, 0, &res)) + if (of_address_to_resource(ltq_rcu_np, 0, &res)) panic("Failed to get rcu memory range"); if (request_mem_region(res.start, resource_size(&res), res.name) < 0) diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c index 2917b56b6b25..3925e6609acc 100644 --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -370,6 +370,10 @@ void __init ltq_soc_init(void) clkdev_add_pmu("1d900000.pcie", "pdi", 1, PMU1_PCIE_PDI); clkdev_add_pmu("1d900000.pcie", "ctl", 1, PMU1_PCIE_CTL); clkdev_add_pmu("1d900000.pcie", "ahb", 0, PMU_AHBM | PMU_AHBS); + clkdev_add_pmu("1e108000.eth", NULL, 0, + PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | + PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | + PMU_PPE_QSB | PMU_PPE_TOP); } else if (of_machine_is_compatible("lantiq,ar9")) { clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), ltq_ar9_fpi_hz()); diff --git a/arch/mips/lantiq/xway/xrx200_phy_fw.c b/arch/mips/lantiq/xway/xrx200_phy_fw.c new file mode 100644 index 000000000000..fe808bf5366d --- /dev/null +++ b/arch/mips/lantiq/xway/xrx200_phy_fw.c @@ -0,0 +1,97 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/module.h> +#include <linux/firmware.h> +#include <linux/of_platform.h> + +#include <lantiq_soc.h> + +#define XRX200_GPHY_FW_ALIGN (16 * 1024) + +static dma_addr_t xway_gphy_load(struct platform_device *pdev) +{ + const struct firmware *fw; + dma_addr_t dev_addr = 0; + const char *fw_name; + void *fw_addr; + size_t size; + + if (of_property_read_string(pdev->dev.of_node, "firmware", &fw_name)) { + dev_err(&pdev->dev, "failed to load firmware filename\n"); + return 0; + } + + dev_info(&pdev->dev, "requesting %s\n", fw_name); + if (request_firmware(&fw, fw_name, &pdev->dev)) { + dev_err(&pdev->dev, "failed to load firmware: %s\n", fw_name); + return 0; + } + + /* + * GPHY cores need the firmware code in a persistent and contiguous + * memory area with a 16 kB boundary aligned start address + */ + size = fw->size + XRX200_GPHY_FW_ALIGN; + + fw_addr = dma_alloc_coherent(&pdev->dev, size, &dev_addr, GFP_KERNEL); + if (fw_addr) { + fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN); + dev_addr = ALIGN(dev_addr, XRX200_GPHY_FW_ALIGN); + memcpy(fw_addr, fw->data, fw->size); + } else { + dev_err(&pdev->dev, "failed to alloc firmware memory\n"); + } + + release_firmware(fw); + return dev_addr; +} + +static int __devinit xway_phy_fw_probe(struct platform_device *pdev) +{ + dma_addr_t fw_addr; + struct property *pp; + unsigned char *phyids; + int i, ret = 0; + + fw_addr = xway_gphy_load(pdev); + if (!fw_addr) + return -EINVAL; + pp = of_find_property(pdev->dev.of_node, "phys", NULL); + if (!pp) + return -ENOENT; + phyids = pp->value; + for (i = 0; i < pp->length && !ret; i++) + ret = xrx200_gphy_boot(&pdev->dev, phyids[i], fw_addr); + if (!ret) + mdelay(100); + return ret; +} + +static const struct of_device_id xway_phy_match[] = { + { .compatible = "lantiq,phy-xrx200" }, + {}, +}; +MODULE_DEVICE_TABLE(of, xway_phy_match); + +static struct platform_driver xway_phy_driver = { + .probe = xway_phy_fw_probe, + .driver = { + .name = "phy-xrx200", + .owner = THIS_MODULE, + .of_match_table = xway_phy_match, + }, +}; + +module_platform_driver(xway_phy_driver); + +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); +MODULE_DESCRIPTION("Lantiq XRX200 PHY Firmware Loader"); +MODULE_LICENSE("GPL"); |