diff options
Diffstat (limited to 'arch/mips/loongson64')
53 files changed, 208 insertions, 3450 deletions
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig index 4c14a11525f4..48b29c198acf 100644 --- a/arch/mips/loongson64/Kconfig +++ b/arch/mips/loongson64/Kconfig @@ -1,119 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 if MACH_LOONGSON64 -choice - prompt "Machine Type" - -config LEMOTE_FULOONG2E - bool "Lemote Fuloong(2e) mini-PC" - select ARCH_SPARSEMEM_ENABLE - select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_MIGHT_HAVE_PC_SERIO - select CEVT_R4K - select CSRC_R4K - select SYS_HAS_CPU_LOONGSON2E - select DMA_NONCOHERENT - select BOOT_ELF32 - select BOARD_SCACHE - select HAVE_PCI - select I8259 - select ISA - select IRQ_MIPS_CPU - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select SYS_HAS_EARLY_PRINTK - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select CPU_HAS_WB - select LOONGSON_MC146818 - help - Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and - an FPGA northbridge - - Lemote Fuloong(2e) mini PC have a VIA686B south bridge. - -config LEMOTE_MACH2F - bool "Lemote Loongson 2F family machines" - select ARCH_SPARSEMEM_ENABLE - select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_MIGHT_HAVE_PC_SERIO - select BOARD_SCACHE - select BOOT_ELF32 - select CEVT_R4K if ! MIPS_EXTERNAL_TIMER - select CPU_HAS_WB - select CS5536 - select CSRC_R4K if ! MIPS_EXTERNAL_TIMER - select DMA_NONCOHERENT - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select HAVE_CLK - select HAVE_PCI - select I8259 - select IRQ_MIPS_CPU - select ISA - select SYS_HAS_CPU_LOONGSON2F - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_LITTLE_ENDIAN - select LOONGSON_MC146818 - help - Lemote Loongson 2F family machines utilize the 2F revision of - Loongson processor and the AMD CS5536 south bridge. - - These family machines include fuloong2f mini PC, yeeloong2f notebook, - LingLoong allinone PC and so forth. - -config LOONGSON_MACH3X - bool "Generic Loongson 3 family machines" - select ARCH_SPARSEMEM_ENABLE - select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_MIGHT_HAVE_PC_SERIO - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select BOOT_ELF32 - select BOARD_SCACHE - select CSRC_R4K - select CEVT_R4K - select CPU_HAS_WB - select FORCE_PCI - select ISA - select I8259 - select IRQ_MIPS_CPU - select NR_CPUS_DEFAULT_4 - select SYS_HAS_CPU_LOONGSON3 - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_SMP - select SYS_SUPPORTS_HOTPLUG_CPU - select SYS_SUPPORTS_NUMA - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_LITTLE_ENDIAN - select LOONGSON_MC146818 - select ZONE_DMA32 - select LEFI_FIRMWARE_INTERFACE - help - Generic Loongson 3 family machines utilize the 3A/3B revision - of Loongson processor and RS780/SBX00 chipset. -endchoice - -config CS5536 - bool - -config CS5536_MFGPT - bool "CS5536 MFGPT Timer" - depends on CS5536 && !HIGH_RES_TIMERS - select MIPS_EXTERNAL_TIMER - help - This option enables the mfgpt0 timer of AMD CS5536. With this timer - switched on you can not use high resolution timers. - - If you want to enable the Loongson2 CPUFreq Driver, Please enable - this option at first, otherwise, You will get wrong system time. - - If unsure, say Yes. - config RS780_HPET bool "RS780/SBX00 HPET Timer" - depends on LOONGSON_MACH3X + depends on MACH_LOONGSON64 select MIPS_EXTERNAL_TIMER help This option enables the hpet timer of AMD RS780/SBX00. @@ -123,16 +13,9 @@ config RS780_HPET If unsure, say Yes. -config LOONGSON_UART_BASE - bool - default y - depends on EARLY_PRINTK || SERIAL_8250 config LOONGSON_MC146818 bool default n -config LEFI_FIRMWARE_INTERFACE - bool - endif # MACH_LOONGSON64 diff --git a/arch/mips/loongson64/Makefile b/arch/mips/loongson64/Makefile index 1a5df773707d..7821891bc5d0 100644 --- a/arch/mips/loongson64/Makefile +++ b/arch/mips/loongson64/Makefile @@ -1,24 +1,13 @@ # SPDX-License-Identifier: GPL-2.0-only # -# Common code for all Loongson based systems +# Makefile for Loongson-3 family machines # +obj-$(CONFIG_MACH_LOONGSON64) += irq.o cop2-ex.o platform.o acpi_init.o dma.o \ + setup.o init.o env.o time.o reset.o \ -obj-$(CONFIG_MACH_LOONGSON64) += common/ - -# -# Lemote Fuloong mini-PC (Loongson 2E-based) -# - -obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ - -# -# Lemote loongson2f family machines -# - -obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/ - -# -# All Loongson-3 family machines -# - -obj-$(CONFIG_CPU_LOONGSON3) += loongson-3/ +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_NUMA) += numa.o +obj-$(CONFIG_RS780_HPET) += hpet.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_LOONGSON_MC146818) += rtc.o +obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform index c1a4d4dc4665..d5eb94c9edb4 100644 --- a/arch/mips/loongson64/Platform +++ b/arch/mips/loongson64/Platform @@ -2,32 +2,13 @@ # Loongson Processors' Support # -# Only gcc >= 4.4 have Loongson specific support -cflags-$(CONFIG_CPU_LOONGSON2) += -Wa,--trap -cflags-$(CONFIG_CPU_LOONGSON2E) += \ - $(call cc-option,-march=loongson2e,-march=r4600) -cflags-$(CONFIG_CPU_LOONGSON2F) += \ - $(call cc-option,-march=loongson2f,-march=r4600) -# Enable the workarounds for Loongson2f -ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS - ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),) - $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop) - else - cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop - endif - ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),) - $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump) - else - cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump - endif -endif -cflags-$(CONFIG_CPU_LOONGSON3) += -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON64) += -Wa,--trap # # Some versions of binutils, not currently mainline as of 2019/02/04, support # an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction -# to work around a CPU bug (see loongson_llsc_mb() in asm/barrier.h for a +# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a # description). # # We disable this in order to prevent the assembler meddling with the @@ -44,7 +25,7 @@ cflags-$(CONFIG_CPU_LOONGSON3) += -Wa,--trap # binutils does not merge support for the flag then we can revisit & remove # this later - for now it ensures vendor toolchains don't cause problems. # -cflags-$(CONFIG_CPU_LOONGSON3) += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,) +cflags-$(CONFIG_CPU_LOONGSON64) += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,) # # binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a @@ -55,23 +36,25 @@ cflags-$(CONFIG_CPU_LOONGSON3) += $(call as-option,-Wa$(comma)-mno-fix-loongson3 # ifeq ($(call cc-ifversion, -ge, 0409, y), y) ifeq ($(call ld-ifversion, -ge, 225000000, y), y) - cflags-$(CONFIG_CPU_LOONGSON3) += \ + cflags-$(CONFIG_CPU_LOONGSON64) += \ $(call cc-option,-march=loongson3a -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) else - cflags-$(CONFIG_CPU_LOONGSON3) += \ + cflags-$(CONFIG_CPU_LOONGSON64) += \ $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) endif else - cflags-$(CONFIG_CPU_LOONGSON3) += \ + cflags-$(CONFIG_CPU_LOONGSON64) += \ $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) endif +# Some -march= flags enable MMI instructions, and GCC complains about that +# support being enabled alongside -msoft-float. Thus explicitly disable MMI. +cflags-y += $(call cc-option,-mno-loongson-mmi) + # # Loongson Machines' Support # platform-$(CONFIG_MACH_LOONGSON64) += loongson64/ cflags-$(CONFIG_MACH_LOONGSON64) += -I$(srctree)/arch/mips/include/asm/mach-loongson64 -mno-branch-likely -load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000 -load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000 -load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000 +load-$(CONFIG_CPU_LOONGSON64) += 0xffffffff80200000 diff --git a/arch/mips/loongson64/loongson-3/acpi_init.c b/arch/mips/loongson64/acpi_init.c index 8d7c119ddf91..8d7c119ddf91 100644 --- a/arch/mips/loongson64/loongson-3/acpi_init.c +++ b/arch/mips/loongson64/acpi_init.c diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile deleted file mode 100644 index 684624f61f5a..000000000000 --- a/arch/mips/loongson64/common/Makefile +++ /dev/null @@ -1,27 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for loongson based machines. -# - -obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ - bonito-irq.o mem.o machtype.o platform.o serial.o -obj-$(CONFIG_PCI) += pci.o - -# -# Serial port support -# -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o -obj-$(CONFIG_LOONGSON_MC146818) += rtc.o - -# -# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure -# space -# -obj-$(CONFIG_CS5536) += cs5536/ - -# -# Suspend Support -# - -obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/mips/loongson64/common/bonito-irq.c b/arch/mips/loongson64/common/bonito-irq.c deleted file mode 100644 index 82352cc25e4c..000000000000 --- a/arch/mips/loongson64/common/bonito-irq.c +++ /dev/null @@ -1,49 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) - * - * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - */ -#include <linux/interrupt.h> -#include <linux/compiler.h> - -#include <loongson.h> - -static inline void bonito_irq_enable(struct irq_data *d) -{ - LOONGSON_INTENSET = (1 << (d->irq - LOONGSON_IRQ_BASE)); - mmiowb(); -} - -static inline void bonito_irq_disable(struct irq_data *d) -{ - LOONGSON_INTENCLR = (1 << (d->irq - LOONGSON_IRQ_BASE)); - mmiowb(); -} - -static struct irq_chip bonito_irq_type = { - .name = "bonito_irq", - .irq_mask = bonito_irq_disable, - .irq_unmask = bonito_irq_enable, -}; - -static struct irqaction __maybe_unused dma_timeout_irqaction = { - .handler = no_action, - .name = "dma_timeout", -}; - -void bonito_irq_init(void) -{ - u32 i; - - for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++) - irq_set_chip_and_handler(i, &bonito_irq_type, - handle_level_irq); - -#ifdef CONFIG_CPU_LOONGSON2E - setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction); -#endif -} diff --git a/arch/mips/loongson64/common/cmdline.c b/arch/mips/loongson64/common/cmdline.c deleted file mode 100644 index a735460682cf..000000000000 --- a/arch/mips/loongson64/common/cmdline.c +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Based on Ocelot Linux port, which is - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * Copyright 2003 ICT CAS - * Author: Michael Guo <guoyi@ict.ac.cn> - * - * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ -#include <asm/bootinfo.h> - -#include <loongson.h> - -void __init prom_init_cmdline(void) -{ - int prom_argc; - /* pmon passes arguments in 32bit pointers */ - int *_prom_argv; - int i; - long l; - - /* firmware arguments are initialized in head.S */ - prom_argc = fw_arg0; - _prom_argv = (int *)fw_arg1; - - /* arg[0] is "g", the rest is boot parameters */ - arcs_cmdline[0] = '\0'; - for (i = 1; i < prom_argc; i++) { - l = (long)_prom_argv[i]; - if (strlen(arcs_cmdline) + strlen(((char *)l) + 1) - >= sizeof(arcs_cmdline)) - break; - strcat(arcs_cmdline, ((char *)l)); - strcat(arcs_cmdline, " "); - } - - prom_init_machtype(); -} diff --git a/arch/mips/loongson64/common/cs5536/Makefile b/arch/mips/loongson64/common/cs5536/Makefile deleted file mode 100644 index b32b29661245..000000000000 --- a/arch/mips/loongson64/common/cs5536/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for CS5536 support. -# - -obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \ - cs5536_isa.o cs5536_ehci.o - -# -# Enable cs5536 mfgpt Timer -# -obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o diff --git a/arch/mips/loongson64/common/cs5536/cs5536_acc.c b/arch/mips/loongson64/common/cs5536/cs5536_acc.c deleted file mode 100644 index ff50aae72916..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_acc.c +++ /dev/null @@ -1,136 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * the ACC Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include <cs5536/cs5536.h> -#include <cs5536/cs5536_pci.h> - -void pci_acc_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - - switch (reg) { - case PCI_COMMAND: - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if (value & PCI_COMMAND_MASTER) - lo |= (0x03 << 8); - else - lo &= ~(0x03 << 8); - _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); - break; - case PCI_STATUS: - if (value & PCI_STATUS_PARITY) { - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) { - lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - } - break; - case PCI_BAR0_REG: - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= SOFT_BAR_ACC_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if (value & 0x01) { - value &= 0xfffffffc; - hi = 0xA0000000 | ((value & 0x000ff000) >> 12); - lo = 0x000fff80 | ((value & 0x00000fff) << 20); - _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo); - } - break; - case PCI_ACC_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); - /* disable all the usb interrupt in PIC */ - lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT); - if (value) /* enable all the acc interrupt in PIC */ - lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT); - _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); - break; - default: - break; - } -} - -u32 pci_acc_read_reg(int reg) -{ - u32 hi, lo; - u32 conf_data = 0; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); - if (((lo & 0xfff00000) || (hi & 0x000000ff)) - && ((hi & 0xf0000000) == 0xa0000000)) - conf_data |= PCI_COMMAND_IO; - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if ((lo & 0x300) == 0x300) - conf_data |= PCI_COMMAND_MASTER; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_PARITY; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_ACC_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - conf_data = - CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, - PCI_NORMAL_LATENCY_TIMER); - break; - case PCI_BAR0_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_ACC_FLAG) { - conf_data = CS5536_ACC_RANGE | - PCI_BASE_ADDRESS_SPACE_IO; - lo &= ~SOFT_BAR_ACC_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); - conf_data = (hi & 0x000000ff) << 12; - conf_data |= (lo & 0xfff00000) >> 20; - conf_data |= 0x01; - conf_data &= ~0x02; - } - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_USB_POINTER; - break; - case PCI_INTERRUPT_LINE: - conf_data = - CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR); - break; - default: - break; - } - - return conf_data; -} diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ehci.c b/arch/mips/loongson64/common/cs5536/cs5536_ehci.c deleted file mode 100644 index bd4c39fe6109..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_ehci.c +++ /dev/null @@ -1,156 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * the EHCI Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include <cs5536/cs5536.h> -#include <cs5536/cs5536_pci.h> - -void pci_ehci_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - - switch (reg) { - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - if (value & PCI_COMMAND_MASTER) - hi |= PCI_COMMAND_MASTER; - else - hi &= ~PCI_COMMAND_MASTER; - - if (value & PCI_COMMAND_MEMORY) - hi |= PCI_COMMAND_MEMORY; - else - hi &= ~PCI_COMMAND_MEMORY; - _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); - break; - case PCI_STATUS: - if (value & PCI_STATUS_PARITY) { - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) { - lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - } - break; - case PCI_BAR0_REG: - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= SOFT_BAR_EHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if ((value & 0x01) == 0x00) { - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - lo = value; - _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); - - value &= 0xfffffff0; - hi = 0x40000000 | ((value & 0xff000000) >> 24); - lo = 0x000fffff | ((value & 0x00fff000) << 8); - _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo); - } - break; - case PCI_EHCI_LEGSMIEN_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - hi &= 0x003f0000; - hi |= (value & 0x3f) << 16; - _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); - break; - case PCI_EHCI_FLADJ_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - hi &= ~0x00003f00; - hi |= value & 0x00003f00; - _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); - break; - default: - break; - } -} - -u32 pci_ehci_read_reg(int reg) -{ - u32 conf_data = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - if (hi & PCI_COMMAND_MASTER) - conf_data |= PCI_COMMAND_MASTER; - if (hi & PCI_COMMAND_MEMORY) - conf_data |= PCI_COMMAND_MEMORY; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_PARITY; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_EHCI_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - conf_data = - CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, - PCI_NORMAL_LATENCY_TIMER); - break; - case PCI_BAR0_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_EHCI_FLAG) { - conf_data = CS5536_EHCI_RANGE | - PCI_BASE_ADDRESS_SPACE_MEMORY; - lo &= ~SOFT_BAR_EHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - conf_data = lo & 0xfffff000; - } - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_USB_POINTER; - break; - case PCI_INTERRUPT_LINE: - conf_data = - CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); - break; - case PCI_EHCI_LEGSMIEN_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - conf_data = (hi & 0x003f0000) >> 16; - break; - case PCI_EHCI_LEGSMISTS_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - conf_data = (hi & 0x3f000000) >> 24; - break; - case PCI_EHCI_FLADJ_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - conf_data = hi & 0x00003f00; - break; - default: - break; - } - - return conf_data; -} diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ide.c b/arch/mips/loongson64/common/cs5536/cs5536_ide.c deleted file mode 100644 index bb933294b092..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_ide.c +++ /dev/null @@ -1,188 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * the IDE Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include <cs5536/cs5536.h> -#include <cs5536/cs5536_pci.h> - -void pci_ide_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - - switch (reg) { - case PCI_COMMAND: - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if (value & PCI_COMMAND_MASTER) - lo |= (0x03 << 4); - else - lo &= ~(0x03 << 4); - _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); - break; - case PCI_STATUS: - if (value & PCI_STATUS_PARITY) { - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) { - lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - } - break; - case PCI_CACHE_LINE_SIZE: - value &= 0x0000ff00; - _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); - hi &= 0xffffff00; - hi |= (value >> 8); - _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); - break; - case PCI_BAR4_REG: - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= SOFT_BAR_IDE_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if (value & 0x01) { - _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); - lo = (value & 0xfffffff0) | 0x1; - _wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo); - - value &= 0xfffffffc; - hi = 0x60000000 | ((value & 0x000ff000) >> 12); - lo = 0x000ffff0 | ((value & 0x00000fff) << 20); - _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo); - } - break; - case PCI_IDE_CFG_REG: - if (value == CS5536_IDE_FLASH_SIGNATURE) { - _rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo); - lo |= 0x01; - _wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo); - } else { - _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo); - } - break; - case PCI_IDE_DTC_REG: - _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo); - break; - case PCI_IDE_CAST_REG: - _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo); - break; - case PCI_IDE_ETC_REG: - _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo); - break; - case PCI_IDE_PM_REG: - _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); - lo = value; - _wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo); - break; - default: - break; - } -} - -u32 pci_ide_read_reg(int reg) -{ - u32 conf_data = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); - if (lo & 0xfffffff0) - conf_data |= PCI_COMMAND_IO; - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if ((lo & 0x30) == 0x30) - conf_data |= PCI_COMMAND_MASTER; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_PARITY; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_IDE_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); - hi &= 0x000000f8; - conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi); - break; - case PCI_BAR4_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_IDE_FLAG) { - conf_data = CS5536_IDE_RANGE | - PCI_BASE_ADDRESS_SPACE_IO; - lo &= ~SOFT_BAR_IDE_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); - conf_data = lo & 0xfffffff0; - conf_data |= 0x01; - conf_data &= ~0x02; - } - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_POINTER; - break; - case PCI_INTERRUPT_LINE: - conf_data = - CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR); - break; - case PCI_IDE_CFG_REG: - _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); - conf_data = lo; - break; - case PCI_IDE_DTC_REG: - _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); - conf_data = lo; - break; - case PCI_IDE_CAST_REG: - _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); - conf_data = lo; - break; - case PCI_IDE_ETC_REG: - _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); - conf_data = lo; - break; - case PCI_IDE_PM_REG: - _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); - conf_data = lo; - break; - default: - break; - } - - return conf_data; -} diff --git a/arch/mips/loongson64/common/cs5536/cs5536_isa.c b/arch/mips/loongson64/common/cs5536/cs5536_isa.c deleted file mode 100644 index 5ad38f86ee62..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_isa.c +++ /dev/null @@ -1,326 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * the ISA Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include <linux/pci.h> -#include <cs5536/cs5536.h> -#include <cs5536/cs5536_pci.h> - -/* common variables for PCI_ISA_READ/WRITE_BAR */ -static const u32 divil_msr_reg[6] = { - DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO), - DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ), - DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI), -}; - -static const u32 soft_bar_flag[6] = { - SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG, - SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG, -}; - -static const u32 sb_msr_reg[6] = { - SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2), - SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5), -}; - -static const u32 bar_space_range[6] = { - CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE, - CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE, -}; - -static const int bar_space_len[6] = { - CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH, - CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH, -}; - -/* - * enable the divil module bar space. - * - * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg - * and the RCONFx(0~5) reg to use the modules. - */ -static void divil_lbar_enable(void) -{ - u32 hi, lo; - int offset; - - /* - * The DIVIL IRQ is not used yet. and make the RCONF0 reserved. - */ - - for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { - _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); - hi |= 0x01; - _wrmsr(DIVIL_MSR_REG(offset), hi, lo); - } -} - -/* - * disable the divil module bar space. - */ -static void divil_lbar_disable(void) -{ - u32 hi, lo; - int offset; - - for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { - _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); - hi &= ~0x01; - _wrmsr(DIVIL_MSR_REG(offset), hi, lo); - } -} - -/* - * BAR write: write value to the n BAR - */ - -void pci_isa_write_bar(int n, u32 value) -{ - u32 hi = 0, lo = value; - - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= soft_bar_flag[n]; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if (value & 0x01) { - /* NATIVE reg */ - hi = 0x0000f001; - lo &= bar_space_range[n]; - _wrmsr(divil_msr_reg[n], hi, lo); - - /* RCONFx is 4bytes in units for I/O space */ - hi = ((value & 0x000ffffc) << 12) | - ((bar_space_len[n] - 4) << 12) | 0x01; - lo = ((value & 0x000ffffc) << 12) | 0x01; - _wrmsr(sb_msr_reg[n], hi, lo); - } -} - -/* - * BAR read: read the n BAR - */ - -u32 pci_isa_read_bar(int n) -{ - u32 conf_data = 0; - u32 hi, lo; - - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & soft_bar_flag[n]) { - conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO; - lo &= ~soft_bar_flag[n]; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(divil_msr_reg[n], &hi, &lo); - conf_data = lo & bar_space_range[n]; - conf_data |= 0x01; - conf_data &= ~0x02; - } - return conf_data; -} - -/* - * isa_write: ISA write transfer - * - * We assume that this is not a bus master transfer. - */ -void pci_isa_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - u32 temp; - - switch (reg) { - case PCI_COMMAND: - if (value & PCI_COMMAND_IO) - divil_lbar_enable(); - else - divil_lbar_disable(); - break; - case PCI_STATUS: - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - temp = lo & 0x0000ffff; - if ((value & PCI_STATUS_SIG_TARGET_ABORT) && - (lo & SB_TAS_ERR_EN)) - temp |= SB_TAS_ERR_FLAG; - - if ((value & PCI_STATUS_REC_TARGET_ABORT) && - (lo & SB_TAR_ERR_EN)) - temp |= SB_TAR_ERR_FLAG; - - if ((value & PCI_STATUS_REC_MASTER_ABORT) - && (lo & SB_MAR_ERR_EN)) - temp |= SB_MAR_ERR_FLAG; - - if ((value & PCI_STATUS_DETECTED_PARITY) - && (lo & SB_PARE_ERR_EN)) - temp |= SB_PARE_ERR_FLAG; - - lo = temp; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - break; - case PCI_CACHE_LINE_SIZE: - value &= 0x0000ff00; - _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); - hi &= 0xffffff00; - hi |= (value >> 8); - _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); - break; - case PCI_BAR0_REG: - pci_isa_write_bar(0, value); - break; - case PCI_BAR1_REG: - pci_isa_write_bar(1, value); - break; - case PCI_BAR2_REG: - pci_isa_write_bar(2, value); - break; - case PCI_BAR3_REG: - pci_isa_write_bar(3, value); - break; - case PCI_BAR4_REG: - pci_isa_write_bar(4, value); - break; - case PCI_BAR5_REG: - pci_isa_write_bar(5, value); - break; - case PCI_UART1_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); - /* disable uart1 interrupt in PIC */ - lo &= ~(0xf << 24); - if (value) /* enable uart1 interrupt in PIC */ - lo |= (CS5536_UART1_INTR << 24); - _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); - break; - case PCI_UART2_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); - /* disable uart2 interrupt in PIC */ - lo &= ~(0xf << 28); - if (value) /* enable uart2 interrupt in PIC */ - lo |= (CS5536_UART2_INTR << 28); - _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); - break; - case PCI_ISA_FIXUP_REG: - if (value) { - /* enable the TARGET ABORT/MASTER ABORT etc. */ - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - lo |= 0x00000063; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - - default: - /* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */ - break; - } -} - -/* - * isa_read: ISA read transfers - * - * We assume that this is not a bus master transfer. - */ -u32 pci_isa_read_reg(int reg) -{ - u32 conf_data = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - /* we just check the first LBAR for the IO enable bit, */ - /* maybe we should changed later. */ - _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo); - if (hi & 0x01) - conf_data |= PCI_COMMAND_IO; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - conf_data |= PCI_STATUS_FAST_BACK; - - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_TAS_ERR_FLAG) - conf_data |= PCI_STATUS_SIG_TARGET_ABORT; - if (lo & SB_TAR_ERR_FLAG) - conf_data |= PCI_STATUS_REC_TARGET_ABORT; - if (lo & SB_MAR_ERR_FLAG) - conf_data |= PCI_STATUS_REC_MASTER_ABORT; - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_DETECTED_PARITY; - break; - case PCI_CLASS_REVISION: - _rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_ISA_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); - hi &= 0x000000f8; - conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi); - break; - /* - * we only use the LBAR of DIVIL, no RCONF used. - * all of them are IO space. - */ - case PCI_BAR0_REG: - return pci_isa_read_bar(0); - break; - case PCI_BAR1_REG: - return pci_isa_read_bar(1); - break; - case PCI_BAR2_REG: - return pci_isa_read_bar(2); - break; - case PCI_BAR3_REG: - break; - case PCI_BAR4_REG: - return pci_isa_read_bar(4); - break; - case PCI_BAR5_REG: - return pci_isa_read_bar(5); - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_POINTER; - break; - case PCI_INTERRUPT_LINE: - /* no interrupt used here */ - conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00); - break; - default: - break; - } - - return conf_data; -} - -/* - * The mfgpt timer interrupt is running early, so we must keep the south bridge - * mmio always enabled. Otherwise we may race with the PCI configuration which - * may temporarily disable it. When that happens and the timer interrupt fires, - * we are not able to clear it and the system will hang. - */ -static void cs5536_isa_mmio_always_on(struct pci_dev *dev) -{ - dev->mmio_always_on = 1; -} -DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, - PCI_CLASS_BRIDGE_ISA, 8, cs5536_isa_mmio_always_on); diff --git a/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c deleted file mode 100644 index 30af1b7c7529..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c +++ /dev/null @@ -1,207 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * CS5536 General timer functions - * - * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology - * Author: Yanhua, yanh@lemote.com - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu zhangjin, wuzhangjin@gmail.com - * - * Reference: AMD Geode(TM) CS5536 Companion Device Data Book - */ - -#include <linux/io.h> -#include <linux/init.h> -#include <linux/export.h> -#include <linux/jiffies.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/clockchips.h> - -#include <asm/time.h> - -#include <cs5536/cs5536_mfgpt.h> - -static DEFINE_RAW_SPINLOCK(mfgpt_lock); - -static u32 mfgpt_base; - -/* - * Initialize the MFGPT timer. - * - * This is also called after resume to bring the MFGPT into operation again. - */ - -/* disable counter */ -void disable_mfgpt0_counter(void) -{ - outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP); -} -EXPORT_SYMBOL(disable_mfgpt0_counter); - -/* enable counter, comparator2 to event mode, 14.318MHz clock */ -void enable_mfgpt0_counter(void) -{ - outw(0xe310, MFGPT0_SETUP); -} -EXPORT_SYMBOL(enable_mfgpt0_counter); - -static int mfgpt_timer_set_periodic(struct clock_event_device *evt) -{ - raw_spin_lock(&mfgpt_lock); - - outw(COMPARE, MFGPT0_CMP2); /* set comparator2 */ - outw(0, MFGPT0_CNT); /* set counter to 0 */ - enable_mfgpt0_counter(); - - raw_spin_unlock(&mfgpt_lock); - return 0; -} - -static int mfgpt_timer_shutdown(struct clock_event_device *evt) -{ - if (clockevent_state_periodic(evt) || clockevent_state_oneshot(evt)) { - raw_spin_lock(&mfgpt_lock); - disable_mfgpt0_counter(); - raw_spin_unlock(&mfgpt_lock); - } - - return 0; -} - -static struct clock_event_device mfgpt_clockevent = { - .name = "mfgpt", - .features = CLOCK_EVT_FEAT_PERIODIC, - - /* The oneshot mode have very high deviation, don't use it! */ - .set_state_shutdown = mfgpt_timer_shutdown, - .set_state_periodic = mfgpt_timer_set_periodic, - .irq = CS5536_MFGPT_INTR, -}; - -static irqreturn_t timer_interrupt(int irq, void *dev_id) -{ - u32 basehi; - - /* - * get MFGPT base address - * - * NOTE: do not remove me, it's need for the value of mfgpt_base is - * variable - */ - _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); - - /* ack */ - outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP); - - mfgpt_clockevent.event_handler(&mfgpt_clockevent); - - return IRQ_HANDLED; -} - -static struct irqaction irq5 = { - .handler = timer_interrupt, - .flags = IRQF_NOBALANCING | IRQF_TIMER, - .name = "timer" -}; - -/* - * Initialize the conversion factor and the min/max deltas of the clock event - * structure and register the clock event source with the framework. - */ -void __init setup_mfgpt0_timer(void) -{ - u32 basehi; - struct clock_event_device *cd = &mfgpt_clockevent; - unsigned int cpu = smp_processor_id(); - - cd->cpumask = cpumask_of(cpu); - clockevent_set_clock(cd, MFGPT_TICK_RATE); - cd->max_delta_ns = clockevent_delta2ns(0xffff, cd); - cd->max_delta_ticks = 0xffff; - cd->min_delta_ns = clockevent_delta2ns(0xf, cd); - cd->min_delta_ticks = 0xf; - - /* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */ - _wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100); - - /* Enable Interrupt Gate 5 */ - _wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000); - - /* get MFGPT base address */ - _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); - - clockevents_register_device(cd); - - setup_irq(CS5536_MFGPT_INTR, &irq5); -} - -/* - * Since the MFGPT overflows every tick, its not very useful - * to just read by itself. So use jiffies to emulate a free - * running counter: - */ -static u64 mfgpt_read(struct clocksource *cs) -{ - unsigned long flags; - int count; - u32 jifs; - static int old_count; - static u32 old_jifs; - - raw_spin_lock_irqsave(&mfgpt_lock, flags); - /* - * Although our caller may have the read side of xtime_lock, - * this is now a seqlock, and we are cheating in this routine - * by having side effects on state that we cannot undo if - * there is a collision on the seqlock and our caller has to - * retry. (Namely, old_jifs and old_count.) So we must treat - * jiffies as volatile despite the lock. We read jiffies - * before latching the timer count to guarantee that although - * the jiffies value might be older than the count (that is, - * the counter may underflow between the last point where - * jiffies was incremented and the point where we latch the - * count), it cannot be newer. - */ - jifs = jiffies; - /* read the count */ - count = inw(MFGPT0_CNT); - - /* - * It's possible for count to appear to go the wrong way for this - * reason: - * - * The timer counter underflows, but we haven't handled the resulting - * interrupt and incremented jiffies yet. - * - * Previous attempts to handle these cases intelligently were buggy, so - * we just do the simple thing now. - */ - if (count < old_count && jifs == old_jifs) - count = old_count; - - old_count = count; - old_jifs = jifs; - - raw_spin_unlock_irqrestore(&mfgpt_lock, flags); - - return (u64) (jifs * COMPARE) + count; -} - -static struct clocksource clocksource_mfgpt = { - .name = "mfgpt", - .rating = 120, /* Functional for real use, but not desired */ - .read = mfgpt_read, - .mask = CLOCKSOURCE_MASK(32), -}; - -int __init init_mfgpt_clocksource(void) -{ - if (num_possible_cpus() > 1) /* MFGPT does not scale! */ - return 0; - - return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE); -} - -arch_initcall(init_mfgpt_clocksource); diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c b/arch/mips/loongson64/common/cs5536/cs5536_ohci.c deleted file mode 100644 index 71a52b120317..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c +++ /dev/null @@ -1,145 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * the OHCI Virtual Support Module of AMD CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include <cs5536/cs5536.h> -#include <cs5536/cs5536_pci.h> - -void pci_ohci_write_reg(int reg, u32 value) -{ - u32 hi = 0, lo = value; - - switch (reg) { - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); - if (value & PCI_COMMAND_MASTER) - hi |= PCI_COMMAND_MASTER; - else - hi &= ~PCI_COMMAND_MASTER; - - if (value & PCI_COMMAND_MEMORY) - hi |= PCI_COMMAND_MEMORY; - else - hi &= ~PCI_COMMAND_MEMORY; - _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); - break; - case PCI_STATUS: - if (value & PCI_STATUS_PARITY) { - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) { - lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; - _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); - } - } - break; - case PCI_BAR0_REG: - if (value == PCI_BAR_RANGE_MASK) { - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - lo |= SOFT_BAR_OHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else if ((value & 0x01) == 0x00) { - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); - lo = value; - _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); - - value &= 0xfffffff0; - hi = 0x40000000 | ((value & 0xff000000) >> 24); - lo = 0x000fffff | ((value & 0x00fff000) << 8); - _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo); - } - break; - case PCI_OHCI_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); - lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT); - if (value) /* enable all the usb interrupt in PIC */ - lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT); - _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); - break; - default: - break; - } -} - -u32 pci_ohci_read_reg(int reg) -{ - u32 conf_data = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); - if (hi & PCI_COMMAND_MASTER) - conf_data |= PCI_COMMAND_MASTER; - if (hi & PCI_COMMAND_MEMORY) - conf_data |= PCI_COMMAND_MEMORY; - break; - case PCI_STATUS: - conf_data |= PCI_STATUS_66MHZ; - conf_data |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) - conf_data |= PCI_STATUS_PARITY; - conf_data |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); - conf_data = lo & 0x000000ff; - conf_data |= (CS5536_OHCI_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - conf_data = - CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, - PCI_NORMAL_LATENCY_TIMER); - break; - case PCI_BAR0_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_OHCI_FLAG) { - conf_data = CS5536_OHCI_RANGE | - PCI_BASE_ADDRESS_SPACE_MEMORY; - lo &= ~SOFT_BAR_OHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); - conf_data = lo & 0xffffff00; - conf_data &= ~0x0000000f; /* 32bit mem */ - } - break; - case PCI_CARDBUS_CIS: - conf_data = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: - conf_data = - CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: - conf_data = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: - conf_data = PCI_CAPLIST_USB_POINTER; - break; - case PCI_INTERRUPT_LINE: - conf_data = - CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); - break; - case PCI_OHCI_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); - if (((lo >> PIC_YSEL_LOW_USB_SHIFT) & 0xf) == CS5536_USB_INTR) - conf_data = 1; - break; - default: - break; - } - - return conf_data; -} diff --git a/arch/mips/loongson64/common/cs5536/cs5536_pci.c b/arch/mips/loongson64/common/cs5536/cs5536_pci.c deleted file mode 100644 index 202c89b568ba..000000000000 --- a/arch/mips/loongson64/common/cs5536/cs5536_pci.c +++ /dev/null @@ -1,84 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * read/write operation to the PCI config space of CS5536 - * - * Copyright (C) 2007 Lemote, Inc. - * Author : jlliu, liujl@lemote.com - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * the Virtual Support Module(VSM) for virtulizing the PCI - * configure space are defined in cs5536_modulename.c respectively, - * - * after this virtulizing, user can access the PCI configure space - * directly as a normal multi-function PCI device which follows - * the PCI-2.2 spec. - */ - -#include <linux/types.h> -#include <cs5536/cs5536_pci.h> -#include <cs5536/cs5536_vsm.h> - -enum { - CS5536_FUNC_START = -1, - CS5536_ISA_FUNC, - reserved_func, - CS5536_IDE_FUNC, - CS5536_ACC_FUNC, - CS5536_OHCI_FUNC, - CS5536_EHCI_FUNC, - CS5536_FUNC_END, -}; - -static const cs5536_pci_vsm_write vsm_conf_write[] = { - [CS5536_ISA_FUNC] = pci_isa_write_reg, - [reserved_func] = NULL, - [CS5536_IDE_FUNC] = pci_ide_write_reg, - [CS5536_ACC_FUNC] = pci_acc_write_reg, - [CS5536_OHCI_FUNC] = pci_ohci_write_reg, - [CS5536_EHCI_FUNC] = pci_ehci_write_reg, -}; - -static const cs5536_pci_vsm_read vsm_conf_read[] = { - [CS5536_ISA_FUNC] = pci_isa_read_reg, - [reserved_func] = NULL, - [CS5536_IDE_FUNC] = pci_ide_read_reg, - [CS5536_ACC_FUNC] = pci_acc_read_reg, - [CS5536_OHCI_FUNC] = pci_ohci_read_reg, - [CS5536_EHCI_FUNC] = pci_ehci_read_reg, -}; - -/* - * write to PCI config space and transfer it to MSR write. - */ -void cs5536_pci_conf_write4(int function, int reg, u32 value) -{ - if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) - return; - if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0)) - return; - - if (vsm_conf_write[function] != NULL) - vsm_conf_write[function](reg, value); -} - -/* - * read PCI config space and transfer it to MSR access. - */ -u32 cs5536_pci_conf_read4(int function, int reg) -{ - u32 data = 0; - - if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) - return 0; - if ((reg < 0) || ((reg & 0x03) != 0)) - return 0; - if (reg > 0x100) - return 0xffffffff; - - if (vsm_conf_read[function] != NULL) - data = vsm_conf_read[function](reg); - - return data; -} diff --git a/arch/mips/loongson64/common/early_printk.c b/arch/mips/loongson64/common/early_printk.c deleted file mode 100644 index 5e2a151aa30c..000000000000 --- a/arch/mips/loongson64/common/early_printk.c +++ /dev/null @@ -1,38 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* early printk support - * - * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> - * Copyright (c) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ -#include <linux/serial_reg.h> -#include <asm/setup.h> - -#include <loongson.h> - -#define PORT(base, offset) (u8 *)(base + offset) - -static inline unsigned int serial_in(unsigned char *base, int offset) -{ - return readb(PORT(base, offset)); -} - -static inline void serial_out(unsigned char *base, int offset, int value) -{ - writeb(value, PORT(base, offset)); -} - -void prom_putchar(char c) -{ - int timeout; - unsigned char *uart_base; - - uart_base = (unsigned char *)_loongson_uart_base[0]; - timeout = 1024; - - while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) && - (timeout-- > 0)) - ; - - serial_out(uart_base, UART_TX, c); -} diff --git a/arch/mips/loongson64/common/irq.c b/arch/mips/loongson64/common/irq.c deleted file mode 100644 index 0ea93c1c0a97..000000000000 --- a/arch/mips/loongson64/common/irq.c +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - */ -#include <linux/delay.h> -#include <linux/interrupt.h> - -#include <loongson.h> -/* - * the first level int-handler will jump here if it is a bonito irq - */ -void bonito_irqdispatch(void) -{ - u32 int_status; - int i; - - /* workaround the IO dma problem: let cpu looping to allow DMA finish */ - int_status = LOONGSON_INTISR; - while (int_status & (1 << 10)) { - udelay(1); - int_status = LOONGSON_INTISR; - } - - /* Get pending sources, masked by current enables */ - int_status = LOONGSON_INTISR & LOONGSON_INTEN; - - if (int_status) { - i = __ffs(int_status); - do_IRQ(LOONGSON_IRQ_BASE + i); - } -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending; - - pending = read_c0_cause() & read_c0_status() & ST0_IM; - - /* machine-specific plat_irq_dispatch */ - mach_irq_dispatch(pending); -} - -void __init arch_init_irq(void) -{ - /* - * Clear all of the interrupts while we change the able around a bit. - * int-handler is not on bootstrap - */ - clear_c0_status(ST0_IM | ST0_BEV); - - /* no steer */ - LOONGSON_INTSTEER = 0; - - /* - * Mask out all interrupt by writing "1" to all bit position in - * the interrupt reset reg. - */ - LOONGSON_INTENCLR = ~0; - - /* machine specific irq init */ - mach_init_irq(); -} diff --git a/arch/mips/loongson64/common/machtype.c b/arch/mips/loongson64/common/machtype.c deleted file mode 100644 index 4e42d929f1c7..000000000000 --- a/arch/mips/loongson64/common/machtype.c +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - * - * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org> - */ -#include <linux/errno.h> -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <machine.h> - -/* please ensure the length of the machtype string is less than 50 */ -#define MACHTYPE_LEN 50 - -static const char *system_types[] = { - [MACH_LOONGSON_UNKNOWN] = "unknown loongson machine", - [MACH_LEMOTE_FL2E] = "lemote-fuloong-2e-box", - [MACH_LEMOTE_FL2F] = "lemote-fuloong-2f-box", - [MACH_LEMOTE_ML2F7] = "lemote-mengloong-2f-7inches", - [MACH_LEMOTE_YL2F89] = "lemote-yeeloong-2f-8.9inches", - [MACH_DEXXON_GDIUM2F10] = "dexxon-gdium-2f", - [MACH_LEMOTE_NAS] = "lemote-nas-2f", - [MACH_LEMOTE_LL2F] = "lemote-lynloong-2f", - [MACH_LOONGSON_GENERIC] = "generic-loongson-machine", - [MACH_LOONGSON_END] = NULL, -}; - -const char *get_system_type(void) -{ - return system_types[mips_machtype]; -} - -void __weak __init mach_prom_init_machtype(void) -{ -} - -void __init prom_init_machtype(void) -{ - char *p, str[MACHTYPE_LEN + 1]; - int machtype = MACH_LEMOTE_FL2E; - - mips_machtype = LOONGSON_MACHTYPE; - - p = strstr(arcs_cmdline, "machtype="); - if (!p) { - mach_prom_init_machtype(); - return; - } - p += strlen("machtype="); - strncpy(str, p, MACHTYPE_LEN); - str[MACHTYPE_LEN] = '\0'; - p = strstr(str, " "); - if (p) - *p = '\0'; - - for (; system_types[machtype]; machtype++) - if (strstr(system_types[machtype], str)) { - mips_machtype = machtype; - break; - } -} diff --git a/arch/mips/loongson64/common/mem.c b/arch/mips/loongson64/common/mem.c deleted file mode 100644 index 4abb92e0fc39..000000000000 --- a/arch/mips/loongson64/common/mem.c +++ /dev/null @@ -1,158 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - */ -#include <linux/fs.h> -#include <linux/fcntl.h> -#include <linux/mm.h> - -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <boot_param.h> -#include <mem.h> -#include <pci.h> - -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - -u32 memsize, highmemsize; - -void __init prom_init_memory(void) -{ - add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); - - add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << - 20), BOOT_MEM_RESERVED); - -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - { - int bit; - - bit = fls(memsize + highmemsize); - if (bit != ffs(memsize + highmemsize)) - bit += 20; - else - bit = bit + 20 - 1; - - /* set cpu window3 to map CPU to DDR: 2G -> 2G */ - LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul, - 0x80000000ul, (1 << bit)); - mmiowb(); - } -#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ - -#ifdef CONFIG_64BIT - if (highmemsize > 0) - add_memory_region(LOONGSON_HIGHMEM_START, - highmemsize << 20, BOOT_MEM_RAM); - - add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - - LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); - -#endif /* !CONFIG_64BIT */ -} - -#else /* CONFIG_LEFI_FIRMWARE_INTERFACE */ - -void __init prom_init_memory(void) -{ - int i; - u32 node_id; - u32 mem_type; - - /* parse memory information */ - for (i = 0; i < loongson_memmap->nr_map; i++) { - node_id = loongson_memmap->map[i].node_id; - mem_type = loongson_memmap->map[i].mem_type; - - if (node_id == 0) { - switch (mem_type) { - case SYSTEM_RAM_LOW: - add_memory_region(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20, - BOOT_MEM_RAM); - break; - case SYSTEM_RAM_HIGH: - add_memory_region(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20, - BOOT_MEM_RAM); - break; - case SYSTEM_RAM_RESERVED: - add_memory_region(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20, - BOOT_MEM_RESERVED); - break; - } - } - } -} - -#endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */ - -/* override of arch/mips/mm/cache.c: __uncached_access */ -int __uncached_access(struct file *file, unsigned long addr) -{ - if (file->f_flags & O_DSYNC) - return 1; - - return addr >= __pa(high_memory) || - ((addr >= LOONGSON_MMIO_MEM_START) && - (addr < LOONGSON_MMIO_MEM_END)); -} - -#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED - -#include <linux/pci.h> -#include <linux/sched.h> -#include <asm/current.h> - -static unsigned long uca_start, uca_end; - -pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, - unsigned long size, pgprot_t vma_prot) -{ - unsigned long offset = pfn << PAGE_SHIFT; - unsigned long end = offset + size; - - if (__uncached_access(file, offset)) { - if (uca_start && (offset >= uca_start) && - (end <= uca_end)) - return __pgprot((pgprot_val(vma_prot) & - ~_CACHE_MASK) | - _CACHE_UNCACHED_ACCELERATED); - else - return pgprot_noncached(vma_prot); - } - return vma_prot; -} - -static int __init find_vga_mem_init(void) -{ - struct pci_dev *dev = 0; - struct resource *r; - int idx; - - if (uca_start) - return 0; - - for_each_pci_dev(dev) { - if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { - for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { - r = &dev->resource[idx]; - if (!r->start && r->end) - continue; - if (r->flags & IORESOURCE_IO) - continue; - if (r->flags & IORESOURCE_MEM) { - uca_start = r->start; - uca_end = r->end; - return 0; - } - } - } - } - - return 0; -} - -late_initcall(find_vga_mem_init); -#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */ diff --git a/arch/mips/loongson64/common/pci.c b/arch/mips/loongson64/common/pci.c deleted file mode 100644 index c47bb7bf3aa4..000000000000 --- a/arch/mips/loongson64/common/pci.c +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - */ -#include <linux/pci.h> - -#include <pci.h> -#include <loongson.h> -#include <boot_param.h> - -static struct resource loongson_pci_mem_resource = { - .name = "pci memory space", - .start = LOONGSON_PCI_MEM_START, - .end = LOONGSON_PCI_MEM_END, - .flags = IORESOURCE_MEM, -}; - -static struct resource loongson_pci_io_resource = { - .name = "pci io space", - .start = LOONGSON_PCI_IO_START, - .end = IO_SPACE_LIMIT, - .flags = IORESOURCE_IO, -}; - -static struct pci_controller loongson_pci_controller = { - .pci_ops = &loongson_pci_ops, - .io_resource = &loongson_pci_io_resource, - .mem_resource = &loongson_pci_mem_resource, - .mem_offset = 0x00000000UL, - .io_offset = 0x00000000UL, -}; - -static void __init setup_pcimap(void) -{ - /* - * local to PCI mapping for CPU accessing PCI space - * CPU address space [256M,448M] is window for accessing pci space - * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M] - * - * pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0 - * [<2G] [384M,448M] [320M,384M] [0M,64M] - */ - LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 | - LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) | - LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) | - LOONGSON_PCIMAP_WIN(0, 0); - - /* - * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M] - */ - LOONGSON_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */ - /* size: 256M, burst transmission, pre-fetch enable, 64bit */ - LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul; - LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful; - LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */ - LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul; - LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */ - LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul; - - /* avoid deadlock of PCI reading/writing lock operation */ - LOONGSON_PCI_ISR4C = 0xd2000001ul; - - /* can not change gnt to break pci transfer when device's gnt not - deassert for some broken device */ - LOONGSON_PXARB_CFG = 0x00fe0105ul; - -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - /* - * set cpu addr window2 to map CPU address space to PCI address space - */ - LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC, - LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE); -#endif -} - -extern int sbx00_acpi_init(void); - -static int __init pcibios_init(void) -{ - setup_pcimap(); - - loongson_pci_controller.io_map_base = mips_io_port_base; -#ifdef CONFIG_LEFI_FIRMWARE_INTERFACE - loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr; - loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr; -#endif - register_pci_controller(&loongson_pci_controller); - -#ifdef CONFIG_CPU_LOONGSON3 - sbx00_acpi_init(); -#endif - - return 0; -} - -arch_initcall(pcibios_init); diff --git a/arch/mips/loongson64/common/platform.c b/arch/mips/loongson64/common/platform.c deleted file mode 100644 index 0084820cffaa..000000000000 --- a/arch/mips/loongson64/common/platform.c +++ /dev/null @@ -1,27 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include <linux/err.h> -#include <linux/smp.h> -#include <linux/platform_device.h> - -static struct platform_device loongson2_cpufreq_device = { - .name = "loongson2_cpufreq", - .id = -1, -}; - -static int __init loongson2_cpufreq_init(void) -{ - struct cpuinfo_mips *c = ¤t_cpu_data; - - /* Only 2F revision and it's successors support CPUFreq */ - if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F) - return platform_device_register(&loongson2_cpufreq_device); - - return -ENODEV; -} - -arch_initcall(loongson2_cpufreq_init); diff --git a/arch/mips/loongson64/common/serial.c b/arch/mips/loongson64/common/serial.c deleted file mode 100644 index ffefc1cb2612..000000000000 --- a/arch/mips/loongson64/common/serial.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Yan hua (yanhua@lemote.com) - * Author: Wu Zhangjin (wuzhangjin@gmail.com) - */ - -#include <linux/io.h> -#include <linux/module.h> -#include <linux/serial_8250.h> - -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <machine.h> - -#define PORT(int, clk) \ -{ \ - .irq = int, \ - .uartclk = clk, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -#define PORT_M(int, clk) \ -{ \ - .irq = MIPS_CPU_IRQ_BASE + (int), \ - .uartclk = clk, \ - .iotype = UPIO_MEM, \ - .membase = (void __iomem *)NULL, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -static struct plat_serial8250_port uart8250_data[][MAX_UARTS + 1] = { - [MACH_LOONGSON_UNKNOWN] = {}, - [MACH_LEMOTE_FL2E] = {PORT(4, 1843200), {} }, - [MACH_LEMOTE_FL2F] = {PORT(3, 1843200), {} }, - [MACH_LEMOTE_ML2F7] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_YL2F89] = {PORT_M(3, 3686400), {} }, - [MACH_DEXXON_GDIUM2F10] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_NAS] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_LL2F] = {PORT(3, 1843200), {} }, - [MACH_LOONGSON_GENERIC] = {PORT_M(2, 25000000), {} }, - [MACH_LOONGSON_END] = {}, -}; - -static struct platform_device uart8250_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, -}; - -static int __init serial_init(void) -{ - int i; - unsigned char iotype; - - iotype = uart8250_data[mips_machtype][0].iotype; - - if (UPIO_MEM == iotype) { - uart8250_data[mips_machtype][0].mapbase = - loongson_uart_base[0]; - uart8250_data[mips_machtype][0].membase = - (void __iomem *)_loongson_uart_base[0]; - } - else if (UPIO_PORT == iotype) - uart8250_data[mips_machtype][0].iobase = - loongson_uart_base[0] - LOONGSON_PCIIO_BASE; - - if (loongson_sysconf.uarts[0].uartclk) - uart8250_data[mips_machtype][0].uartclk = - loongson_sysconf.uarts[0].uartclk; - - for (i = 1; i < loongson_sysconf.nr_uarts; i++) { - iotype = loongson_sysconf.uarts[i].iotype; - uart8250_data[mips_machtype][i].iotype = iotype; - loongson_uart_base[i] = loongson_sysconf.uarts[i].uart_base; - - if (UPIO_MEM == iotype) { - uart8250_data[mips_machtype][i].irq = - MIPS_CPU_IRQ_BASE + loongson_sysconf.uarts[i].int_offset; - uart8250_data[mips_machtype][i].mapbase = - loongson_uart_base[i]; - uart8250_data[mips_machtype][i].membase = - ioremap_nocache(loongson_uart_base[i], 8); - } else if (UPIO_PORT == iotype) { - uart8250_data[mips_machtype][i].irq = - loongson_sysconf.uarts[i].int_offset; - uart8250_data[mips_machtype][i].iobase = - loongson_uart_base[i] - LOONGSON_PCIIO_BASE; - } - - uart8250_data[mips_machtype][i].uartclk = - loongson_sysconf.uarts[i].uartclk; - uart8250_data[mips_machtype][i].flags = - UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - } - - memset(&uart8250_data[mips_machtype][loongson_sysconf.nr_uarts], - 0, sizeof(struct plat_serial8250_port)); - uart8250_device.dev.platform_data = uart8250_data[mips_machtype]; - - return platform_device_register(&uart8250_device); -} -module_init(serial_init); - -static void __init serial_exit(void) -{ - platform_device_unregister(&uart8250_device); -} -module_exit(serial_exit); diff --git a/arch/mips/loongson64/common/uart_base.c b/arch/mips/loongson64/common/uart_base.c deleted file mode 100644 index e88d937f10fe..000000000000 --- a/arch/mips/loongson64/common/uart_base.c +++ /dev/null @@ -1,46 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include <linux/export.h> -#include <asm/bootinfo.h> - -#include <loongson.h> - -/* raw */ -unsigned long loongson_uart_base[MAX_UARTS] = {}; -/* ioremapped */ -unsigned long _loongson_uart_base[MAX_UARTS] = {}; - -EXPORT_SYMBOL(loongson_uart_base); -EXPORT_SYMBOL(_loongson_uart_base); - -void prom_init_loongson_uart_base(void) -{ - switch (mips_machtype) { - case MACH_LOONGSON_GENERIC: - /* The CPU provided serial port (CPU) */ - loongson_uart_base[0] = LOONGSON_REG_BASE + 0x1e0; - break; - case MACH_LEMOTE_FL2E: - loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x3f8; - break; - case MACH_LEMOTE_FL2F: - case MACH_LEMOTE_LL2F: - loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x2f8; - break; - case MACH_LEMOTE_ML2F7: - case MACH_LEMOTE_YL2F89: - case MACH_DEXXON_GDIUM2F10: - case MACH_LEMOTE_NAS: - default: - /* The CPU provided serial port (LPC) */ - loongson_uart_base[0] = LOONGSON_LIO1_BASE + 0x3f8; - break; - } - - _loongson_uart_base[0] = - (unsigned long)ioremap_nocache(loongson_uart_base[0], 8); -} diff --git a/arch/mips/loongson64/loongson-3/cop2-ex.c b/arch/mips/loongson64/cop2-ex.c index 9efdfe430ff0..9efdfe430ff0 100644 --- a/arch/mips/loongson64/loongson-3/cop2-ex.c +++ b/arch/mips/loongson64/cop2-ex.c diff --git a/arch/mips/loongson64/loongson-3/dma.c b/arch/mips/loongson64/dma.c index 5e86635f71db..5e86635f71db 100644 --- a/arch/mips/loongson64/loongson-3/dma.c +++ b/arch/mips/loongson64/dma.c diff --git a/arch/mips/loongson64/common/env.c b/arch/mips/loongson64/env.c index 09d5cf4676ca..0daeb7bcf023 100644 --- a/arch/mips/loongson64/common/env.c +++ b/arch/mips/loongson64/env.c @@ -30,41 +30,13 @@ u64 loongson_freqctrl[MAX_PACKAGES]; unsigned long long smp_group[4]; -#define parse_even_earlier(res, option, p) \ -do { \ - unsigned int tmp __maybe_unused; \ - \ - if (strncmp(option, (char *)p, strlen(option)) == 0) \ - tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \ -} while (0) +const char *get_system_type(void) +{ + return "Generic Loongson64 System"; +} void __init prom_init_env(void) { - /* pmon passes arguments in 32bit pointers */ - unsigned int processor_id; - -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - int *_prom_envp; - long l; - - /* firmware arguments are initialized in head.S */ - _prom_envp = (int *)fw_arg2; - - l = (long)*_prom_envp; - while (l != 0) { - parse_even_earlier(cpu_clock_freq, "cpuclock", l); - parse_even_earlier(memsize, "memsize", l); - parse_even_earlier(highmemsize, "highmemsize", l); - _prom_envp++; - l = (long)*_prom_envp; - } - if (memsize == 0) - memsize = 256; - - loongson_sysconf.nr_uarts = 1; - - pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize); -#else struct boot_params *boot_p; struct loongson_params *loongson_p; struct system_loongson *esys; @@ -182,31 +154,5 @@ void __init prom_init_env(void) if (loongson_sysconf.nr_sensors) memcpy(loongson_sysconf.sensors, esys->sensors, sizeof(struct sensor_device) * loongson_sysconf.nr_sensors); -#endif - if (cpu_clock_freq == 0) { - processor_id = (¤t_cpu_data)->processor_id; - switch (processor_id & PRID_REV_MASK) { - case PRID_REV_LOONGSON2E: - cpu_clock_freq = 533080000; - break; - case PRID_REV_LOONGSON2F: - cpu_clock_freq = 797000000; - break; - case PRID_REV_LOONGSON3A_R1: - case PRID_REV_LOONGSON3A_R2_0: - case PRID_REV_LOONGSON3A_R2_1: - case PRID_REV_LOONGSON3A_R3_0: - case PRID_REV_LOONGSON3A_R3_1: - cpu_clock_freq = 900000000; - break; - case PRID_REV_LOONGSON3B_R1: - case PRID_REV_LOONGSON3B_R2: - cpu_clock_freq = 1000000000; - break; - default: - cpu_clock_freq = 100000000; - break; - } - } pr_info("CpuClock = %u\n", cpu_clock_freq); } diff --git a/arch/mips/loongson64/fuloong-2e/Makefile b/arch/mips/loongson64/fuloong-2e/Makefile deleted file mode 100644 index bb58edb3bea7..000000000000 --- a/arch/mips/loongson64/fuloong-2e/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for Lemote Fuloong2e mini-PC board. -# - -obj-y += irq.o reset.o dma.o diff --git a/arch/mips/loongson64/fuloong-2e/dma.c b/arch/mips/loongson64/fuloong-2e/dma.c deleted file mode 100644 index e122292bf666..000000000000 --- a/arch/mips/loongson64/fuloong-2e/dma.c +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/dma-direct.h> - -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) -{ - return paddr | 0x80000000; -} - -phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr) -{ - return dma_addr & 0x7fffffff; -} diff --git a/arch/mips/loongson64/fuloong-2e/irq.c b/arch/mips/loongson64/fuloong-2e/irq.c deleted file mode 100644 index 32278e7bf85c..000000000000 --- a/arch/mips/loongson64/fuloong-2e/irq.c +++ /dev/null @@ -1,65 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - */ -#include <linux/interrupt.h> - -#include <asm/irq_cpu.h> -#include <asm/i8259.h> - -#include <loongson.h> - -static void i8259_irqdispatch(void) -{ - int irq; - - irq = i8259_irq(); - if (irq >= 0) - do_IRQ(irq); - else - spurious_interrupt(); -} - -asmlinkage void mach_irq_dispatch(unsigned int pending) -{ - if (pending & CAUSEF_IP7) - do_IRQ(MIPS_CPU_IRQ_BASE + 7); - else if (pending & CAUSEF_IP6) /* perf counter loverflow */ - do_perfcnt_IRQ(); - else if (pending & CAUSEF_IP5) - i8259_irqdispatch(); - else if (pending & CAUSEF_IP2) - bonito_irqdispatch(); - else - spurious_interrupt(); -} - -static struct irqaction cascade_irqaction = { - .handler = no_action, - .name = "cascade", - .flags = IRQF_NO_THREAD, -}; - -void __init mach_init_irq(void) -{ - /* init all controller - * 0-15 ------> i8259 interrupt - * 16-23 ------> mips cpu interrupt - * 32-63 ------> bonito irq - */ - - /* most bonito irq should be level triggered */ - LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR | - LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES; - - /* Sets the first-level interrupt dispatcher. */ - mips_cpu_irq_init(); - init_i8259_irqs(); - bonito_irq_init(); - - /* bonito irq at IP2 */ - setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction); - /* 8259 irq at IP5 */ - setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction); -} diff --git a/arch/mips/loongson64/fuloong-2e/reset.c b/arch/mips/loongson64/fuloong-2e/reset.c deleted file mode 100644 index 8273de1cf4bb..000000000000 --- a/arch/mips/loongson64/fuloong-2e/reset.c +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* Board-specific reboot/shutdown routines - * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include <loongson.h> - -void mach_prepare_reboot(void) -{ - LOONGSON_GENCFG &= ~(1 << 2); - LOONGSON_GENCFG |= (1 << 2); -} - -void mach_prepare_shutdown(void) -{ -} diff --git a/arch/mips/loongson64/loongson-3/hpet.c b/arch/mips/loongson64/hpet.c index ed15430ad64f..ed15430ad64f 100644 --- a/arch/mips/loongson64/loongson-3/hpet.c +++ b/arch/mips/loongson64/hpet.c diff --git a/arch/mips/loongson64/common/init.c b/arch/mips/loongson64/init.c index 912fe61c4fc7..5ac1a0f35ca4 100644 --- a/arch/mips/loongson64/common/init.c +++ b/arch/mips/loongson64/init.c @@ -9,12 +9,10 @@ #include <asm/traps.h> #include <asm/smp-ops.h> #include <asm/cacheflush.h> +#include <asm/fw/fw.h> #include <loongson.h> -/* Loongson CPU address windows config space base address */ -unsigned long __maybe_unused _loongson_addrwincfg_base; - static void __init mips_nmi_setup(void) { void *base; @@ -27,26 +25,18 @@ static void __init mips_nmi_setup(void) void __init prom_init(void) { -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - _loongson_addrwincfg_base = (unsigned long) - ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE); -#endif - - prom_init_cmdline(); + fw_init_cmdline(); prom_init_env(); /* init base address of io space */ set_io_port_base((unsigned long) ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); -#ifdef CONFIG_NUMA prom_init_numa_memory(); -#else - prom_init_memory(); -#endif - /*init the uart base address */ - prom_init_uart_base(); + /* Hardcode to CPU UART 0 */ + setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024); + register_smp_ops(&loongson3_smp_ops); board_nmi_handler_setup = mips_nmi_setup; } diff --git a/arch/mips/loongson64/loongson-3/irq.c b/arch/mips/loongson64/irq.c index 5605061f5f98..79ad797497e4 100644 --- a/arch/mips/loongson64/loongson-3/irq.c +++ b/arch/mips/loongson64/irq.c @@ -78,8 +78,12 @@ static void ht_irqdispatch(void) #define UNUSED_IPS (CAUSEF_IP5 | CAUSEF_IP4 | CAUSEF_IP1 | CAUSEF_IP0) -void mach_irq_dispatch(unsigned int pending) +asmlinkage void plat_irq_dispatch(void) { + unsigned int pending; + + pending = read_c0_cause() & read_c0_status() & ST0_IM; + if (pending & CAUSEF_IP7) do_IRQ(LOONGSON_TIMER_IRQ); #if defined(CONFIG_SMP) @@ -127,7 +131,7 @@ void irq_router_init(void) LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10; } -void __init mach_init_irq(void) +void __init arch_init_irq(void) { struct irq_chip *chip; diff --git a/arch/mips/loongson64/lemote-2f/Makefile b/arch/mips/loongson64/lemote-2f/Makefile deleted file mode 100644 index 881a0ec06d1f..000000000000 --- a/arch/mips/loongson64/lemote-2f/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for lemote loongson2f family machines -# - -obj-y += clock.o machtype.o irq.o reset.o dma.o ec_kb3310b.o - -# -# Suspend Support -# - -obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/mips/loongson64/lemote-2f/clock.c b/arch/mips/loongson64/lemote-2f/clock.c deleted file mode 100644 index 8281334df9c8..000000000000 --- a/arch/mips/loongson64/lemote-2f/clock.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) 2006 - 2008 Lemote Inc. & Institute of Computing Technology - * Author: Yanhua, yanh@lemote.com - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/clk.h> -#include <linux/cpufreq.h> -#include <linux/errno.h> -#include <linux/export.h> -#include <linux/list.h> -#include <linux/mutex.h> -#include <linux/spinlock.h> - -#include <asm/clock.h> -#include <asm/mach-loongson64/loongson.h> - -static LIST_HEAD(clock_list); -static DEFINE_SPINLOCK(clock_lock); -static DEFINE_MUTEX(clock_list_sem); - -/* Minimum CLK support */ -enum { - DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT, - DC_87PT, DC_DISABLE, DC_RESV -}; - -struct cpufreq_frequency_table loongson2_clockmod_table[] = { - {0, DC_RESV, CPUFREQ_ENTRY_INVALID}, - {0, DC_ZERO, CPUFREQ_ENTRY_INVALID}, - {0, DC_25PT, 0}, - {0, DC_37PT, 0}, - {0, DC_50PT, 0}, - {0, DC_62PT, 0}, - {0, DC_75PT, 0}, - {0, DC_87PT, 0}, - {0, DC_DISABLE, 0}, - {0, DC_RESV, CPUFREQ_TABLE_END}, -}; -EXPORT_SYMBOL_GPL(loongson2_clockmod_table); - -static struct clk cpu_clk = { - .name = "cpu_clk", - .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, - .rate = 800000000, -}; - -struct clk *clk_get(struct device *dev, const char *id) -{ - return &cpu_clk; -} -EXPORT_SYMBOL(clk_get); - -static void propagate_rate(struct clk *clk) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &clock_list, node) { - if (likely(clkp->parent != clk)) - continue; - if (likely(clkp->ops && clkp->ops->recalc)) - clkp->ops->recalc(clkp); - if (unlikely(clkp->flags & CLK_RATE_PROPAGATES)) - propagate_rate(clkp); - } -} - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - if (!clk) - return 0; - - return (unsigned long)clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int rate_khz = rate / 1000; - struct cpufreq_frequency_table *pos; - int ret = 0; - int regval; - - if (likely(clk->ops && clk->ops->set_rate)) { - unsigned long flags; - - spin_lock_irqsave(&clock_lock, flags); - ret = clk->ops->set_rate(clk, rate, 0); - spin_unlock_irqrestore(&clock_lock, flags); - } - - if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) - propagate_rate(clk); - - cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table) - if (rate_khz == pos->frequency) - break; - if (rate_khz != pos->frequency) - return -ENOTSUPP; - - clk->rate = rate; - - regval = LOONGSON_CHIPCFG(0); - regval = (regval & ~0x7) | (pos->driver_data - 1); - LOONGSON_CHIPCFG(0) = regval; - - return ret; -} -EXPORT_SYMBOL_GPL(clk_set_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (likely(clk->ops && clk->ops->round_rate)) { - unsigned long flags, rounded; - - spin_lock_irqsave(&clock_lock, flags); - rounded = clk->ops->round_rate(clk, rate); - spin_unlock_irqrestore(&clock_lock, flags); - - return rounded; - } - - return rate; -} -EXPORT_SYMBOL_GPL(clk_round_rate); diff --git a/arch/mips/loongson64/lemote-2f/dma.c b/arch/mips/loongson64/lemote-2f/dma.c deleted file mode 100644 index abf0e39d7e46..000000000000 --- a/arch/mips/loongson64/lemote-2f/dma.c +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/dma-direct.h> - -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) -{ - return paddr | 0x80000000; -} - -phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr) -{ - if (dma_addr > 0x8fffffff) - return dma_addr; - return dma_addr & 0x0fffffff; -} diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c b/arch/mips/loongson64/lemote-2f/ec_kb3310b.c deleted file mode 100644 index d138220e96a2..000000000000 --- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c +++ /dev/null @@ -1,125 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook - * - * Copyright (C) 2008 Lemote Inc. - * Author: liujl <liujl@lemote.com>, 2008-04-20 - */ - -#include <linux/io.h> -#include <linux/export.h> -#include <linux/spinlock.h> -#include <linux/delay.h> - -#include "ec_kb3310b.h" - -static DEFINE_SPINLOCK(index_access_lock); -static DEFINE_SPINLOCK(port_access_lock); - -unsigned char ec_read(unsigned short addr) -{ - unsigned char value; - unsigned long flags; - - spin_lock_irqsave(&index_access_lock, flags); - outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); - outb((addr & 0x00ff), EC_IO_PORT_LOW); - value = inb(EC_IO_PORT_DATA); - spin_unlock_irqrestore(&index_access_lock, flags); - - return value; -} -EXPORT_SYMBOL_GPL(ec_read); - -void ec_write(unsigned short addr, unsigned char val) -{ - unsigned long flags; - - spin_lock_irqsave(&index_access_lock, flags); - outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); - outb((addr & 0x00ff), EC_IO_PORT_LOW); - outb(val, EC_IO_PORT_DATA); - /* flush the write action */ - inb(EC_IO_PORT_DATA); - spin_unlock_irqrestore(&index_access_lock, flags); -} -EXPORT_SYMBOL_GPL(ec_write); - -/* - * This function is used for EC command writes and corresponding status queries. - */ -int ec_query_seq(unsigned char cmd) -{ - int timeout; - unsigned char status; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&port_access_lock, flags); - - /* make chip goto reset mode */ - udelay(EC_REG_DELAY); - outb(cmd, EC_CMD_PORT); - udelay(EC_REG_DELAY); - - /* check if the command is received by ec */ - timeout = EC_CMD_TIMEOUT; - status = inb(EC_STS_PORT); - while (timeout-- && (status & (1 << 1))) { - status = inb(EC_STS_PORT); - udelay(EC_REG_DELAY); - } - - spin_unlock_irqrestore(&port_access_lock, flags); - - if (timeout <= 0) { - printk(KERN_ERR "%s: deadable error : timeout...\n", __func__); - ret = -EINVAL; - } else - printk(KERN_INFO - "(%x/%d)ec issued command %d status : 0x%x\n", - timeout, EC_CMD_TIMEOUT - timeout, cmd, status); - - return ret; -} -EXPORT_SYMBOL_GPL(ec_query_seq); - -/* - * Send query command to EC to get the proper event number - */ -int ec_query_event_num(void) -{ - return ec_query_seq(CMD_GET_EVENT_NUM); -} -EXPORT_SYMBOL(ec_query_event_num); - -/* - * Get event number from EC - * - * NOTE: This routine must follow the query_event_num function in the - * interrupt. - */ -int ec_get_event_num(void) -{ - int timeout = 100; - unsigned char value; - unsigned char status; - - udelay(EC_REG_DELAY); - status = inb(EC_STS_PORT); - udelay(EC_REG_DELAY); - while (timeout-- && !(status & (1 << 0))) { - status = inb(EC_STS_PORT); - udelay(EC_REG_DELAY); - } - if (timeout <= 0) { - pr_info("%s: get event number timeout.\n", __func__); - - return -EINVAL; - } - value = inb(EC_DAT_PORT); - udelay(EC_REG_DELAY); - - return value; -} -EXPORT_SYMBOL(ec_get_event_num); diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h b/arch/mips/loongson64/lemote-2f/ec_kb3310b.h deleted file mode 100644 index aecdbc9c875a..000000000000 --- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h +++ /dev/null @@ -1,184 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * KB3310B Embedded Controller - * - * Copyright (C) 2008 Lemote Inc. - * Author: liujl <liujl@lemote.com>, 2008-03-14 - */ - -#ifndef _EC_KB3310B_H -#define _EC_KB3310B_H - -extern unsigned char ec_read(unsigned short addr); -extern void ec_write(unsigned short addr, unsigned char val); -extern int ec_query_seq(unsigned char cmd); -extern int ec_query_event_num(void); -extern int ec_get_event_num(void); - -typedef int (*sci_handler) (int status); -extern sci_handler yeeloong_report_lid_status; - -#define SCI_IRQ_NUM 0x0A - -/* - * The following registers are determined by the EC index configuration. - * 1, fill the PORT_HIGH as EC register high part. - * 2, fill the PORT_LOW as EC register low part. - * 3, fill the PORT_DATA as EC register write data or get the data from it. - */ -#define EC_IO_PORT_HIGH 0x0381 -#define EC_IO_PORT_LOW 0x0382 -#define EC_IO_PORT_DATA 0x0383 - -/* - * EC delay time is 500us for register and status access - */ -#define EC_REG_DELAY 500 /* unit : us */ -#define EC_CMD_TIMEOUT 0x1000 - -/* - * EC access port for SCI communication - */ -#define EC_CMD_PORT 0x66 -#define EC_STS_PORT 0x66 -#define EC_DAT_PORT 0x62 -#define CMD_INIT_IDLE_MODE 0xdd -#define CMD_EXIT_IDLE_MODE 0xdf -#define CMD_INIT_RESET_MODE 0xd8 -#define CMD_REBOOT_SYSTEM 0x8c -#define CMD_GET_EVENT_NUM 0x84 -#define CMD_PROGRAM_PIECE 0xda - -/* temperature & fan registers */ -#define REG_TEMPERATURE_VALUE 0xF458 -#define REG_FAN_AUTO_MAN_SWITCH 0xF459 -#define BIT_FAN_AUTO 0 -#define BIT_FAN_MANUAL 1 -#define REG_FAN_CONTROL 0xF4D2 -#define BIT_FAN_CONTROL_ON (1 << 0) -#define BIT_FAN_CONTROL_OFF (0 << 0) -#define REG_FAN_STATUS 0xF4DA -#define BIT_FAN_STATUS_ON (1 << 0) -#define BIT_FAN_STATUS_OFF (0 << 0) -#define REG_FAN_SPEED_HIGH 0xFE22 -#define REG_FAN_SPEED_LOW 0xFE23 -#define REG_FAN_SPEED_LEVEL 0xF4CC -/* fan speed divider */ -#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ - -/* battery registers */ -#define REG_BAT_DESIGN_CAP_HIGH 0xF77D -#define REG_BAT_DESIGN_CAP_LOW 0xF77E -#define REG_BAT_FULLCHG_CAP_HIGH 0xF780 -#define REG_BAT_FULLCHG_CAP_LOW 0xF781 -#define REG_BAT_DESIGN_VOL_HIGH 0xF782 -#define REG_BAT_DESIGN_VOL_LOW 0xF783 -#define REG_BAT_CURRENT_HIGH 0xF784 -#define REG_BAT_CURRENT_LOW 0xF785 -#define REG_BAT_VOLTAGE_HIGH 0xF786 -#define REG_BAT_VOLTAGE_LOW 0xF787 -#define REG_BAT_TEMPERATURE_HIGH 0xF788 -#define REG_BAT_TEMPERATURE_LOW 0xF789 -#define REG_BAT_RELATIVE_CAP_HIGH 0xF492 -#define REG_BAT_RELATIVE_CAP_LOW 0xF493 -#define REG_BAT_VENDOR 0xF4C4 -#define FLAG_BAT_VENDOR_SANYO 0x01 -#define FLAG_BAT_VENDOR_SIMPLO 0x02 -#define REG_BAT_CELL_COUNT 0xF4C6 -#define FLAG_BAT_CELL_3S1P 0x03 -#define FLAG_BAT_CELL_3S2P 0x06 -#define REG_BAT_CHARGE 0xF4A2 -#define FLAG_BAT_CHARGE_DISCHARGE 0x01 -#define FLAG_BAT_CHARGE_CHARGE 0x02 -#define FLAG_BAT_CHARGE_ACPOWER 0x00 -#define REG_BAT_STATUS 0xF4B0 -#define BIT_BAT_STATUS_LOW (1 << 5) -#define BIT_BAT_STATUS_DESTROY (1 << 2) -#define BIT_BAT_STATUS_FULL (1 << 1) -#define BIT_BAT_STATUS_IN (1 << 0) -#define REG_BAT_CHARGE_STATUS 0xF4B1 -#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) -#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) -#define REG_BAT_STATE 0xF482 -#define BIT_BAT_STATE_CHARGING (1 << 1) -#define BIT_BAT_STATE_DISCHARGING (1 << 0) -#define REG_BAT_POWER 0xF440 -#define BIT_BAT_POWER_S3 (1 << 2) -#define BIT_BAT_POWER_ON (1 << 1) -#define BIT_BAT_POWER_ACIN (1 << 0) - -/* other registers */ -/* Audio: rd/wr */ -#define REG_AUDIO_VOLUME 0xF46C -#define REG_AUDIO_MUTE 0xF4E7 -#define REG_AUDIO_BEEP 0xF4D0 -/* USB port power or not: rd/wr */ -#define REG_USB0_FLAG 0xF461 -#define REG_USB1_FLAG 0xF462 -#define REG_USB2_FLAG 0xF463 -#define BIT_USB_FLAG_ON 1 -#define BIT_USB_FLAG_OFF 0 -/* LID */ -#define REG_LID_DETECT 0xF4BD -#define BIT_LID_DETECT_ON 1 -#define BIT_LID_DETECT_OFF 0 -/* CRT */ -#define REG_CRT_DETECT 0xF4AD -#define BIT_CRT_DETECT_PLUG 1 -#define BIT_CRT_DETECT_UNPLUG 0 -/* LCD backlight brightness adjust: 9 levels */ -#define REG_DISPLAY_BRIGHTNESS 0xF4F5 -/* Black screen Status */ -#define BIT_DISPLAY_LCD_ON 1 -#define BIT_DISPLAY_LCD_OFF 0 -/* LCD backlight control: off/restore */ -#define REG_BACKLIGHT_CTRL 0xF7BD -#define BIT_BACKLIGHT_ON 1 -#define BIT_BACKLIGHT_OFF 0 -/* Reset the machine auto-clear: rd/wr */ -#define REG_RESET 0xF4EC -#define BIT_RESET_ON 1 -/* Light the led: rd/wr */ -#define REG_LED 0xF4C8 -#define BIT_LED_RED_POWER (1 << 0) -#define BIT_LED_ORANGE_POWER (1 << 1) -#define BIT_LED_GREEN_CHARGE (1 << 2) -#define BIT_LED_RED_CHARGE (1 << 3) -#define BIT_LED_NUMLOCK (1 << 4) -/* Test led mode, all led on/off */ -#define REG_LED_TEST 0xF4C2 -#define BIT_LED_TEST_IN 1 -#define BIT_LED_TEST_OUT 0 -/* Camera on/off */ -#define REG_CAMERA_STATUS 0xF46A -#define BIT_CAMERA_STATUS_ON 1 -#define BIT_CAMERA_STATUS_OFF 0 -#define REG_CAMERA_CONTROL 0xF7B7 -#define BIT_CAMERA_CONTROL_OFF 0 -#define BIT_CAMERA_CONTROL_ON 1 -/* Wlan Status */ -#define REG_WLAN 0xF4FA -#define BIT_WLAN_ON 1 -#define BIT_WLAN_OFF 0 -#define REG_DISPLAY_LCD 0xF79F - -/* SCI Event Number from EC */ -enum { - EVENT_LID = 0x23, /* LID open/close */ - EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */ - EVENT_SLEEP, /* Fn+F1 for entering sleep mode */ - EVENT_OVERTEMP, /* Over-temperature happened */ - EVENT_CRT_DETECT, /* CRT is connected */ - EVENT_CAMERA, /* Camera on/off */ - EVENT_USB_OC2, /* USB2 Over Current occurred */ - EVENT_USB_OC0, /* USB0 Over Current occurred */ - EVENT_BLACK_SCREEN, /* Turn on/off backlight */ - EVENT_AUDIO_MUTE, /* Mute on/off */ - EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */ - EVENT_AC_BAT, /* AC & Battery relative issue */ - EVENT_AUDIO_VOLUME, /* Volume adjust */ - EVENT_WLAN, /* Wlan on/off */ - EVENT_END -}; - -#endif /* !_EC_KB3310B_H */ diff --git a/arch/mips/loongson64/lemote-2f/irq.c b/arch/mips/loongson64/lemote-2f/irq.c deleted file mode 100644 index c58a044c6c07..000000000000 --- a/arch/mips/loongson64/lemote-2f/irq.c +++ /dev/null @@ -1,126 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2007 Lemote Inc. - * Author: Fuxin Zhang, zhangfx@lemote.com - */ - -#include <linux/export.h> -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <asm/irq_cpu.h> -#include <asm/i8259.h> -#include <asm/mipsregs.h> - -#include <loongson.h> -#include <machine.h> - -#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */ -#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */ -#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */ -#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */ - -#define LOONGSON_INT_BIT_INT0 (1 << 11) -#define LOONGSON_INT_BIT_INT1 (1 << 12) - -/* - * The generic i8259_irq() make the kernel hang on booting. Since we cannot - * get the irq via the IRR directly, we access the ISR instead. - */ -int mach_i8259_irq(void) -{ - int irq, isr; - - irq = -1; - - if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) { - raw_spin_lock(&i8259A_lock); - isr = inb(PIC_MASTER_CMD) & - ~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR); - if (!isr) - isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8; - irq = ffs(isr) - 1; - if (unlikely(irq == 7)) { - /* - * This may be a spurious interrupt. - * - * Read the interrupt status register (ISR). If the most - * significant bit is not set then there is no valid - * interrupt. - */ - outb(0x0B, PIC_MASTER_ISR); /* ISR register */ - if (~inb(PIC_MASTER_ISR) & 0x80) - irq = -1; - } - raw_spin_unlock(&i8259A_lock); - } - - return irq; -} -EXPORT_SYMBOL(mach_i8259_irq); - -static void i8259_irqdispatch(void) -{ - int irq; - - irq = mach_i8259_irq(); - if (irq >= 0) - do_IRQ(irq); - else - spurious_interrupt(); -} - -void mach_irq_dispatch(unsigned int pending) -{ - if (pending & CAUSEF_IP7) - do_IRQ(LOONGSON_TIMER_IRQ); - else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */ - do_perfcnt_IRQ(); - bonito_irqdispatch(); - } else if (pending & CAUSEF_IP3) /* CPU UART */ - do_IRQ(LOONGSON_UART_IRQ); - else if (pending & CAUSEF_IP2) /* South Bridge */ - i8259_irqdispatch(); - else - spurious_interrupt(); -} - -static irqreturn_t ip6_action(int cpl, void *dev_id) -{ - return IRQ_HANDLED; -} - -static struct irqaction ip6_irqaction = { - .handler = ip6_action, - .name = "cascade", - .flags = IRQF_SHARED | IRQF_NO_THREAD, -}; - -static struct irqaction cascade_irqaction = { - .handler = no_action, - .name = "cascade", - .flags = IRQF_NO_THREAD | IRQF_NO_SUSPEND, -}; - -void __init mach_init_irq(void) -{ - /* init all controller - * 0-15 ------> i8259 interrupt - * 16-23 ------> mips cpu interrupt - * 32-63 ------> bonito irq - */ - - /* setup cs5536 as high level trigger */ - LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1; - LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1); - - /* Sets the first-level interrupt dispatcher. */ - mips_cpu_irq_init(); - init_i8259_irqs(); - bonito_irq_init(); - - /* setup north bridge irq (bonito) */ - setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction); - /* setup source bridge irq (i8259) */ - setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction); -} diff --git a/arch/mips/loongson64/lemote-2f/machtype.c b/arch/mips/loongson64/lemote-2f/machtype.c deleted file mode 100644 index 9462a3ab57be..000000000000 --- a/arch/mips/loongson64/lemote-2f/machtype.c +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ -#include <asm/bootinfo.h> - -#include <loongson.h> - -void __init mach_prom_init_machtype(void) -{ - /* We share the same kernel image file among Lemote 2F family - * of machines, and provide the machtype= kernel command line - * to users to indicate their machine, this command line will - * be passed by the latest PMON automatically. and fortunately, - * up to now, we can get the machine type from the PMON_VER= - * commandline directly except the NAS machine, In the old - * machines, this will help the users a lot. - * - * If no "machtype=" passed, get machine type from "PMON_VER=". - * PMON_VER=LM8089 Lemote 8.9'' netbook - * LM8101 Lemote 10.1'' netbook - * (The above two netbooks have the same kernel support) - * LM6XXX Lemote FuLoong(2F) box series - * LM9XXX Lemote LynLoong PC series - */ - if (strstr(arcs_cmdline, "PMON_VER=LM")) { - if (strstr(arcs_cmdline, "PMON_VER=LM8")) - mips_machtype = MACH_LEMOTE_YL2F89; - else if (strstr(arcs_cmdline, "PMON_VER=LM6")) - mips_machtype = MACH_LEMOTE_FL2F; - else if (strstr(arcs_cmdline, "PMON_VER=LM9")) - mips_machtype = MACH_LEMOTE_LL2F; - else - mips_machtype = MACH_LEMOTE_NAS; - - strcat(arcs_cmdline, " machtype="); - strcat(arcs_cmdline, get_system_type()); - strcat(arcs_cmdline, " "); - } -} diff --git a/arch/mips/loongson64/lemote-2f/pm.c b/arch/mips/loongson64/lemote-2f/pm.c deleted file mode 100644 index 3d0027229e3c..000000000000 --- a/arch/mips/loongson64/lemote-2f/pm.c +++ /dev/null @@ -1,145 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Lemote loongson2f family machines' specific suspend support - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin <wuzhangjin@gmail.com> - */ - -#include <linux/suspend.h> -#include <linux/interrupt.h> -#include <linux/pm.h> -#include <linux/i8042.h> -#include <linux/export.h> - -#include <asm/i8259.h> -#include <asm/mipsregs.h> -#include <asm/bootinfo.h> - -#include <loongson.h> - -#include <cs5536/cs5536_mfgpt.h> -#include "ec_kb3310b.h" - -#define I8042_KBD_IRQ 1 -#define I8042_CTR_KBDINT 0x01 -#define I8042_CTR_KBDDIS 0x10 - -static unsigned char i8042_ctr; - -static int i8042_enable_kbd_port(void) -{ - if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) { - pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port." - "\n"); - return -EIO; - } - - i8042_ctr &= ~I8042_CTR_KBDDIS; - i8042_ctr |= I8042_CTR_KBDINT; - - if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { - i8042_ctr &= ~I8042_CTR_KBDINT; - i8042_ctr |= I8042_CTR_KBDDIS; - pr_err("i8042.c: Failed to enable KBD port.\n"); - - return -EIO; - } - - return 0; -} - -void setup_wakeup_events(void) -{ - int irq_mask; - - switch (mips_machtype) { - case MACH_LEMOTE_ML2F7: - case MACH_LEMOTE_YL2F89: - /* open the keyboard irq in i8259A */ - outb((0xff & ~(1 << I8042_KBD_IRQ)), PIC_MASTER_IMR); - irq_mask = inb(PIC_MASTER_IMR); - - /* enable keyboard port */ - i8042_enable_kbd_port(); - - /* Wakeup CPU via SCI lid open event */ - outb(irq_mask & ~(1 << PIC_CASCADE_IR), PIC_MASTER_IMR); - inb(PIC_MASTER_IMR); - outb(0xff & ~(1 << (SCI_IRQ_NUM - 8)), PIC_SLAVE_IMR); - inb(PIC_SLAVE_IMR); - - break; - - default: - break; - } -} - -static struct delayed_work lid_task; -static int initialized; -/* yeeloong_report_lid_status will be implemented in yeeloong_laptop.c */ -sci_handler yeeloong_report_lid_status; -EXPORT_SYMBOL(yeeloong_report_lid_status); -static void yeeloong_lid_update_task(struct work_struct *work) -{ - if (yeeloong_report_lid_status) - yeeloong_report_lid_status(BIT_LID_DETECT_ON); -} - -int wakeup_loongson(void) -{ - int irq; - - /* query the interrupt number */ - irq = mach_i8259_irq(); - if (irq < 0) - return 0; - - printk(KERN_INFO "%s: irq = %d\n", __func__, irq); - - if (irq == I8042_KBD_IRQ) - return 1; - else if (irq == SCI_IRQ_NUM) { - int ret, sci_event; - /* query the event number */ - ret = ec_query_seq(CMD_GET_EVENT_NUM); - if (ret < 0) - return 0; - sci_event = ec_get_event_num(); - if (sci_event < 0) - return 0; - if (sci_event == EVENT_LID) { - int lid_status; - /* check the LID status */ - lid_status = ec_read(REG_LID_DETECT); - /* wakeup cpu when people open the LID */ - if (lid_status == BIT_LID_DETECT_ON) { - /* If we call it directly here, the WARNING - * will be sent out by getnstimeofday - * via "WARN_ON(timekeeping_suspended);" - * because we can not schedule in suspend mode. - */ - if (initialized == 0) { - INIT_DELAYED_WORK(&lid_task, - yeeloong_lid_update_task); - initialized = 1; - } - schedule_delayed_work(&lid_task, 1); - return 1; - } - } - } - - return 0; -} - -void __weak mach_suspend(void) -{ - disable_mfgpt0_counter(); -} - -void __weak mach_resume(void) -{ - enable_mfgpt0_counter(); -} diff --git a/arch/mips/loongson64/lemote-2f/reset.c b/arch/mips/loongson64/lemote-2f/reset.c deleted file mode 100644 index 0db0934302ea..000000000000 --- a/arch/mips/loongson64/lemote-2f/reset.c +++ /dev/null @@ -1,155 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* Board-specific reboot/shutdown routines - * - * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ - -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/types.h> - -#include <asm/bootinfo.h> - -#include <loongson.h> - -#include <cs5536/cs5536.h> -#include "ec_kb3310b.h" - -static void reset_cpu(void) -{ - /* - * reset cpu to full speed, this is needed when enabling cpu frequency - * scalling - */ - LOONGSON_CHIPCFG(0) |= 0x7; -} - -/* reset support for fuloong2f */ - -static void fl2f_reboot(void) -{ - reset_cpu(); - - /* send a reset signal to south bridge. - * - * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset - * normally with this reset operation and it will not work in PMON, but - * you can type halt command and then reboot, seems the hardware reset - * logic not work normally. - */ - { - u32 hi, lo; - _rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo); - lo |= 0x00000001; - _wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo); - } -} - -static void fl2f_shutdown(void) -{ - u32 hi, lo, val; - int gpio_base; - - /* get gpio base */ - _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo); - gpio_base = lo & 0xff00; - - /* make cs5536 gpio13 output enable */ - val = inl(gpio_base + GPIOL_OUT_EN); - val &= ~(1 << (16 + 13)); - val |= (1 << 13); - outl(val, gpio_base + GPIOL_OUT_EN); - mmiowb(); - /* make cs5536 gpio13 output low level voltage. */ - val = inl(gpio_base + GPIOL_OUT_VAL) & ~(1 << (13)); - val |= (1 << (16 + 13)); - outl(val, gpio_base + GPIOL_OUT_VAL); - mmiowb(); -} - -/* reset support for yeeloong2f and mengloong2f notebook */ - -static void ml2f_reboot(void) -{ - reset_cpu(); - - /* sending an reset signal to EC(embedded controller) */ - ec_write(REG_RESET, BIT_RESET_ON); -} - -#define yl2f89_reboot ml2f_reboot - -/* menglong(7inches) laptop has different shutdown logic from 8.9inches */ -#define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d -#define EC_SHUTDOWN_IO_PORT_LOW 0xff2e -#define EC_SHUTDOWN_IO_PORT_DATA 0xff2f -#define REG_SHUTDOWN_HIGH 0xFC -#define REG_SHUTDOWN_LOW 0x29 -#define BIT_SHUTDOWN_ON (1 << 1) - -static void ml2f_shutdown(void) -{ - u8 val; - u64 i; - - outb(REG_SHUTDOWN_HIGH, EC_SHUTDOWN_IO_PORT_HIGH); - outb(REG_SHUTDOWN_LOW, EC_SHUTDOWN_IO_PORT_LOW); - mmiowb(); - val = inb(EC_SHUTDOWN_IO_PORT_DATA); - outb(val & (~BIT_SHUTDOWN_ON), EC_SHUTDOWN_IO_PORT_DATA); - mmiowb(); - /* need enough wait here... how many microseconds needs? */ - for (i = 0; i < 0x10000; i++) - delay(); - outb(val | BIT_SHUTDOWN_ON, EC_SHUTDOWN_IO_PORT_DATA); - mmiowb(); -} - -static void yl2f89_shutdown(void) -{ - /* cpu-gpio0 output low */ - LOONGSON_GPIODATA &= ~0x00000001; - /* cpu-gpio0 as output */ - LOONGSON_GPIOIE &= ~0x00000001; -} - -void mach_prepare_reboot(void) -{ - switch (mips_machtype) { - case MACH_LEMOTE_FL2F: - case MACH_LEMOTE_NAS: - case MACH_LEMOTE_LL2F: - fl2f_reboot(); - break; - case MACH_LEMOTE_ML2F7: - ml2f_reboot(); - break; - case MACH_LEMOTE_YL2F89: - yl2f89_reboot(); - break; - default: - break; - } -} - -void mach_prepare_shutdown(void) -{ - switch (mips_machtype) { - case MACH_LEMOTE_FL2F: - case MACH_LEMOTE_NAS: - case MACH_LEMOTE_LL2F: - fl2f_shutdown(); - break; - case MACH_LEMOTE_ML2F7: - ml2f_shutdown(); - break; - case MACH_LEMOTE_YL2F89: - yl2f89_shutdown(); - break; - default: - break; - } -} diff --git a/arch/mips/loongson64/loongson-3/Makefile b/arch/mips/loongson64/loongson-3/Makefile deleted file mode 100644 index df39598742b2..000000000000 --- a/arch/mips/loongson64/loongson-3/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for Loongson-3 family machines -# -obj-y += irq.o cop2-ex.o platform.o acpi_init.o dma.o - -obj-$(CONFIG_SMP) += smp.o - -obj-$(CONFIG_NUMA) += numa.o - -obj-$(CONFIG_RS780_HPET) += hpet.o diff --git a/arch/mips/loongson64/loongson-3/numa.c b/arch/mips/loongson64/numa.c index 414e97de5dc0..ef94a2278561 100644 --- a/arch/mips/loongson64/loongson-3/numa.c +++ b/arch/mips/loongson64/numa.c @@ -26,12 +26,15 @@ #include <asm/wbflush.h> #include <boot_param.h> -static struct node_data prealloc__node_data[MAX_NUMNODES]; +static struct pglist_data prealloc__node_data[MAX_NUMNODES]; unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES]; EXPORT_SYMBOL(__node_distances); -struct node_data *__node_data[MAX_NUMNODES]; +struct pglist_data *__node_data[MAX_NUMNODES]; EXPORT_SYMBOL(__node_data); +cpumask_t __node_cpumask[MAX_NUMNODES]; +EXPORT_SYMBOL(__node_cpumask); + static void enable_lpa(void) { unsigned long value; @@ -142,8 +145,6 @@ static void __init szmem(unsigned int node) (u32)node_id, mem_type, mem_start, mem_size); pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", start_pfn, end_pfn, num_physpages); - add_memory_region((node_id << 44) + mem_start, - (u64)mem_size << 20, BOOT_MEM_RAM); memblock_add_node(PFN_PHYS(start_pfn), PFN_PHYS(end_pfn - start_pfn), node); break; @@ -156,16 +157,12 @@ static void __init szmem(unsigned int node) (u32)node_id, mem_type, mem_start, mem_size); pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", start_pfn, end_pfn, num_physpages); - add_memory_region((node_id << 44) + mem_start, - (u64)mem_size << 20, BOOT_MEM_RAM); memblock_add_node(PFN_PHYS(start_pfn), PFN_PHYS(end_pfn - start_pfn), node); break; case SYSTEM_RAM_RESERVED: pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n", (u32)node_id, mem_type, mem_start, mem_size); - add_memory_region((node_id << 44) + mem_start, - (u64)mem_size << 20, BOOT_MEM_RESERVED); memblock_reserve(((node_id << 44) + mem_start), mem_size << 20); break; @@ -191,8 +188,6 @@ static void __init node_mem_init(unsigned int node) NODE_DATA(node)->node_start_pfn = start_pfn; NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn; - free_bootmem_with_active_regions(node, end_pfn); - if (node == 0) { /* kernel end address */ unsigned long kernel_end_pfn = PFN_UP(__pa_symbol(&_end)); @@ -209,8 +204,6 @@ static void __init node_mem_init(unsigned int node) memblock_reserve((node_addrspace_offset | 0xfe000000), 32 << 20); } - - sparse_memory_present_with_active_regions(node); } static __init void prom_meminit(void) @@ -224,9 +217,10 @@ static __init void prom_meminit(void) if (node_online(node)) { szmem(node); node_mem_init(node); - cpumask_clear(&__node_data[(node)]->cpumask); + cpumask_clear(&__node_cpumask[node]); } } + memblocks_present(); max_low_pfn = PHYS_PFN(memblock_end_of_DRAM()); for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) { @@ -237,7 +231,7 @@ static __init void prom_meminit(void) if (loongson_sysconf.reserved_cpus_mask & (1<<cpu)) continue; - cpumask_set_cpu(active_cpu, &__node_data[(node)]->cpumask); + cpumask_set_cpu(active_cpu, &__node_cpumask[node]); pr_info("NUMA: set cpumask cpu %d on node %d\n", active_cpu, node); active_cpu++; diff --git a/arch/mips/loongson64/pci.c b/arch/mips/loongson64/pci.c new file mode 100644 index 000000000000..e84ae20c3290 --- /dev/null +++ b/arch/mips/loongson64/pci.c @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + */ +#include <linux/pci.h> + +#include <pci.h> +#include <loongson.h> +#include <boot_param.h> + +static struct resource loongson_pci_mem_resource = { + .name = "pci memory space", + .start = LOONGSON_PCI_MEM_START, + .end = LOONGSON_PCI_MEM_END, + .flags = IORESOURCE_MEM, +}; + +static struct resource loongson_pci_io_resource = { + .name = "pci io space", + .start = LOONGSON_PCI_IO_START, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + +static struct pci_controller loongson_pci_controller = { + .pci_ops = &loongson_pci_ops, + .io_resource = &loongson_pci_io_resource, + .mem_resource = &loongson_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_offset = 0x00000000UL, +}; + + +extern int sbx00_acpi_init(void); + +static int __init pcibios_init(void) +{ + + loongson_pci_controller.io_map_base = mips_io_port_base; + loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr; + loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr; + + register_pci_controller(&loongson_pci_controller); + + sbx00_acpi_init(); + + return 0; +} + +arch_initcall(pcibios_init); diff --git a/arch/mips/loongson64/loongson-3/platform.c b/arch/mips/loongson64/platform.c index 13f3404f0030..13f3404f0030 100644 --- a/arch/mips/loongson64/loongson-3/platform.c +++ b/arch/mips/loongson64/platform.c diff --git a/arch/mips/loongson64/common/pm.c b/arch/mips/loongson64/pm.c index b8aed878d912..7c8556f09781 100644 --- a/arch/mips/loongson64/common/pm.c +++ b/arch/mips/loongson64/pm.c @@ -60,56 +60,6 @@ void __weak setup_wakeup_events(void) { } -/* - * Check wakeup events - */ -int __weak wakeup_loongson(void) -{ - return 1; -} - -/* - * If the events are really what we want to wakeup the CPU, wake it up - * otherwise put the CPU asleep again. - */ -static void wait_for_wakeup_events(void) -{ - while (!wakeup_loongson()) - LOONGSON_CHIPCFG(0) &= ~0x7; -} - -/* - * Stop all perf counters - * - * $24 is the control register of Loongson perf counter - */ -static inline void stop_perf_counters(void) -{ - __write_64bit_c0_register($24, 0, 0); -} - - -static void loongson_suspend_enter(void) -{ - static unsigned int cached_cpu_freq; - - /* setup wakeup events via enabling the IRQs */ - setup_wakeup_events(); - - stop_perf_counters(); - - cached_cpu_freq = LOONGSON_CHIPCFG(0); - - /* Put CPU into wait mode */ - LOONGSON_CHIPCFG(0) &= ~0x7; - - /* wait for the given events to wakeup cpu from wait mode */ - wait_for_wakeup_events(); - - LOONGSON_CHIPCFG(0) = cached_cpu_freq; - mmiowb(); -} - void __weak mach_suspend(void) { } @@ -122,9 +72,6 @@ static int loongson_pm_enter(suspend_state_t state) { mach_suspend(); - /* processor specific suspend */ - loongson_suspend_enter(); - mach_resume(); return 0; diff --git a/arch/mips/loongson64/common/reset.c b/arch/mips/loongson64/reset.c index ce39e918e4d5..88b3bd5fed25 100644 --- a/arch/mips/loongson64/common/reset.c +++ b/arch/mips/loongson64/reset.c @@ -17,31 +17,12 @@ static inline void loongson_reboot(void) { -#ifndef CONFIG_CPU_JUMP_WORKAROUNDS ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); -#else - void (*func)(void); - - func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4); - - __asm__ __volatile__( - " .set noat \n" - " jr %[func] \n" - " .set at \n" - : /* No outputs */ - : [func] "r" (func)); -#endif } static void loongson_restart(char *command) { -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - /* do preparation for reboot */ - mach_prepare_reboot(); - /* reboot via jumping to boot base address */ - loongson_reboot(); -#else void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr; fw_restart(); @@ -49,20 +30,10 @@ static void loongson_restart(char *command) if (cpu_wait) cpu_wait(); } -#endif } static void loongson_poweroff(void) { -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - mach_prepare_shutdown(); - - /* - * It needs a wait loop here, but mips/kernel/reset.c already calls - * a generic delay loop, machine_hang(), so simply return. - */ - return; -#else void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr; fw_poweroff(); @@ -70,7 +41,6 @@ static void loongson_poweroff(void) if (cpu_wait) cpu_wait(); } -#endif } static void loongson_halt(void) diff --git a/arch/mips/loongson64/common/rtc.c b/arch/mips/loongson64/rtc.c index 8d7628c0f513..8d7628c0f513 100644 --- a/arch/mips/loongson64/common/rtc.c +++ b/arch/mips/loongson64/rtc.c diff --git a/arch/mips/loongson64/common/setup.c b/arch/mips/loongson64/setup.c index bc2da4c140c4..4fd27f4f90ed 100644 --- a/arch/mips/loongson64/common/setup.c +++ b/arch/mips/loongson64/setup.c @@ -11,11 +11,6 @@ #include <loongson.h> -#ifdef CONFIG_VT -#include <linux/console.h> -#include <linux/screen_info.h> -#endif - static void wbflush_loongson(void) { asm(".set\tpush\n\t" @@ -32,20 +27,4 @@ EXPORT_SYMBOL(__wbflush); void __init plat_mem_setup(void) { -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; - - screen_info = (struct screen_info) { - .orig_x = 0, - .orig_y = 25, - .orig_video_cols = 80, - .orig_video_lines = 25, - .orig_video_isVGA = VIDEO_TYPE_VGAC, - .orig_video_points = 16, - }; -#elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; -#endif -#endif } diff --git a/arch/mips/loongson64/loongson-3/smp.c b/arch/mips/loongson64/smp.c index ce68cdaaf33c..de8e0741ce2d 100644 --- a/arch/mips/loongson64/loongson-3/smp.c +++ b/arch/mips/loongson64/smp.c @@ -18,6 +18,7 @@ #include <asm/tlbflush.h> #include <asm/cacheflush.h> #include <loongson.h> +#include <loongson_regs.h> #include <workarounds.h> #include "smp.h" @@ -48,6 +49,62 @@ static uint32_t core0_c0count[NR_CPUS]; __wbflush(); \ } while (0) +u32 (*ipi_read_clear)(int cpu); +void (*ipi_write_action)(int cpu, u32 action); + +static u32 csr_ipi_read_clear(int cpu) +{ + u32 action; + + /* Load the ipi register to figure out what we're supposed to do */ + action = csr_readl(LOONGSON_CSR_IPI_STATUS); + /* Clear the ipi register to clear the interrupt */ + csr_writel(action, LOONGSON_CSR_IPI_CLEAR); + + return action; +} + +static void csr_ipi_write_action(int cpu, u32 action) +{ + unsigned int irq = 0; + + while ((irq = ffs(action))) { + uint32_t val = CSR_IPI_SEND_BLOCK; + val |= (irq - 1); + val |= (cpu << CSR_IPI_SEND_CPU_SHIFT); + csr_writel(val, LOONGSON_CSR_IPI_SEND); + action &= ~BIT(irq - 1); + } +} + +static u32 legacy_ipi_read_clear(int cpu) +{ + u32 action; + + /* Load the ipi register to figure out what we're supposed to do */ + action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]); + /* Clear the ipi register to clear the interrupt */ + loongson3_ipi_write32(action, ipi_clear0_regs[cpu_logical_map(cpu)]); + + return action; +} + +static void legacy_ipi_write_action(int cpu, u32 action) +{ + loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu]); +} + +static void csr_ipi_probe(void) +{ + if (cpu_has_csr() && csr_readl(LOONGSON_CSR_FEATURES) & LOONGSON_CSRF_IPI) { + ipi_read_clear = csr_ipi_read_clear; + ipi_write_action = csr_ipi_write_action; + } else { + ipi_read_clear = legacy_ipi_read_clear; + ipi_write_action = legacy_ipi_write_action; + } +} + static void ipi_set0_regs_init(void) { ipi_set0_regs[0] = (void *) @@ -233,7 +290,7 @@ static void ipi_mailbox_buf_init(void) */ static void loongson3_send_ipi_single(int cpu, unsigned int action) { - loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(cpu)]); + ipi_write_action(cpu_logical_map(cpu), (u32)action); } static void @@ -242,14 +299,14 @@ loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action) unsigned int i; for_each_cpu(i, mask) - loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(i)]); + ipi_write_action(cpu_logical_map(i), (u32)action); } #define IPI_IRQ_OFFSET 6 void loongson3_send_irq_by_ipi(int cpu, int irqs) { - loongson3_ipi_write32(irqs << IPI_IRQ_OFFSET, ipi_set0_regs[cpu_logical_map(cpu)]); + ipi_write_action(cpu_logical_map(cpu), irqs << IPI_IRQ_OFFSET); } void loongson3_ipi_interrupt(struct pt_regs *regs) @@ -257,13 +314,9 @@ void loongson3_ipi_interrupt(struct pt_regs *regs) int i, cpu = smp_processor_id(); unsigned int action, c0count, irqs; - /* Load the ipi register to figure out what we're supposed to do */ - action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]); + action = ipi_read_clear(cpu); irqs = action >> IPI_IRQ_OFFSET; - /* Clear the ipi register to clear the interrupt */ - loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu_logical_map(cpu)]); - if (action & SMP_RESCHEDULE_YOURSELF) scheduler_ipi(); @@ -372,6 +425,7 @@ static void __init loongson3_smp_setup(void) num++; } + csr_ipi_probe(); ipi_set0_regs_init(); ipi_clear0_regs_init(); ipi_status0_regs_init(); @@ -450,7 +504,7 @@ static void loongson3_cpu_die(unsigned int cpu) * flush all L1 entries at first. Then, another core (usually Core 0) can * safely disable the clock of the target core. loongson3_play_dead() is * called via CKSEG1 (uncached and unmmaped) */ -static void loongson3a_r1_play_dead(int *state_addr) +static void loongson3_type1_play_dead(int *state_addr) { register int val; register long cpuid, core, node, count; @@ -512,7 +566,7 @@ static void loongson3a_r1_play_dead(int *state_addr) : "a1"); } -static void loongson3a_r2r3_play_dead(int *state_addr) +static void loongson3_type2_play_dead(int *state_addr) { register int val; register long cpuid, core, node, count; @@ -532,27 +586,7 @@ static void loongson3a_r2r3_play_dead(int *state_addr) " cache 1, 3(%[addr]) \n" " addiu %[sets], %[sets], -1 \n" " bnez %[sets], 1b \n" - " addiu %[addr], %[addr], 0x40 \n" - " li %[addr], 0x80000000 \n" /* KSEG0 */ - "2: cache 2, 0(%[addr]) \n" /* flush L1 VCache */ - " cache 2, 1(%[addr]) \n" - " cache 2, 2(%[addr]) \n" - " cache 2, 3(%[addr]) \n" - " cache 2, 4(%[addr]) \n" - " cache 2, 5(%[addr]) \n" - " cache 2, 6(%[addr]) \n" - " cache 2, 7(%[addr]) \n" - " cache 2, 8(%[addr]) \n" - " cache 2, 9(%[addr]) \n" - " cache 2, 10(%[addr]) \n" - " cache 2, 11(%[addr]) \n" - " cache 2, 12(%[addr]) \n" - " cache 2, 13(%[addr]) \n" - " cache 2, 14(%[addr]) \n" - " cache 2, 15(%[addr]) \n" - " addiu %[vsets], %[vsets], -1 \n" - " bnez %[vsets], 2b \n" - " addiu %[addr], %[addr], 0x40 \n" + " addiu %[addr], %[addr], 0x20 \n" " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ " sw %[val], (%[state_addr]) \n" " sync \n" @@ -560,8 +594,7 @@ static void loongson3a_r2r3_play_dead(int *state_addr) " .set pop \n" : [addr] "=&r" (addr), [val] "=&r" (val) : [state_addr] "r" (state_addr), - [sets] "r" (cpu_data[smp_processor_id()].dcache.sets), - [vsets] "r" (cpu_data[smp_processor_id()].vcache.sets)); + [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); __asm__ __volatile__( " .set push \n" @@ -576,6 +609,8 @@ static void loongson3a_r2r3_play_dead(int *state_addr) " andi %[node], %[cpuid], 0xc \n" " dsll %[node], 42 \n" /* get node id */ " or %[base], %[base], %[node] \n" + " dsrl %[node], 30 \n" /* 15:14 */ + " or %[base], %[base], %[node] \n" "1: li %[count], 0x100 \n" /* wait for init loop */ "2: bnez %[count], 2b \n" /* limit mailbox access */ " addiu %[count], -1 \n" @@ -595,7 +630,7 @@ static void loongson3a_r2r3_play_dead(int *state_addr) : "a1"); } -static void loongson3b_play_dead(int *state_addr) +static void loongson3_type3_play_dead(int *state_addr) { register int val; register long cpuid, core, node, count; @@ -615,7 +650,27 @@ static void loongson3b_play_dead(int *state_addr) " cache 1, 3(%[addr]) \n" " addiu %[sets], %[sets], -1 \n" " bnez %[sets], 1b \n" - " addiu %[addr], %[addr], 0x20 \n" + " addiu %[addr], %[addr], 0x40 \n" + " li %[addr], 0x80000000 \n" /* KSEG0 */ + "2: cache 2, 0(%[addr]) \n" /* flush L1 VCache */ + " cache 2, 1(%[addr]) \n" + " cache 2, 2(%[addr]) \n" + " cache 2, 3(%[addr]) \n" + " cache 2, 4(%[addr]) \n" + " cache 2, 5(%[addr]) \n" + " cache 2, 6(%[addr]) \n" + " cache 2, 7(%[addr]) \n" + " cache 2, 8(%[addr]) \n" + " cache 2, 9(%[addr]) \n" + " cache 2, 10(%[addr]) \n" + " cache 2, 11(%[addr]) \n" + " cache 2, 12(%[addr]) \n" + " cache 2, 13(%[addr]) \n" + " cache 2, 14(%[addr]) \n" + " cache 2, 15(%[addr]) \n" + " addiu %[vsets], %[vsets], -1 \n" + " bnez %[vsets], 2b \n" + " addiu %[addr], %[addr], 0x40 \n" " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ " sw %[val], (%[state_addr]) \n" " sync \n" @@ -623,7 +678,8 @@ static void loongson3b_play_dead(int *state_addr) " .set pop \n" : [addr] "=&r" (addr), [val] "=&r" (val) : [state_addr] "r" (state_addr), - [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); + [sets] "r" (cpu_data[smp_processor_id()].dcache.sets), + [vsets] "r" (cpu_data[smp_processor_id()].vcache.sets)); __asm__ __volatile__( " .set push \n" @@ -638,8 +694,6 @@ static void loongson3b_play_dead(int *state_addr) " andi %[node], %[cpuid], 0xc \n" " dsll %[node], 42 \n" /* get node id */ " or %[base], %[base], %[node] \n" - " dsrl %[node], 30 \n" /* 15:14 */ - " or %[base], %[base], %[node] \n" "1: li %[count], 0x100 \n" /* wait for init loop */ "2: bnez %[count], 2b \n" /* limit mailbox access */ " addiu %[count], -1 \n" @@ -661,30 +715,42 @@ static void loongson3b_play_dead(int *state_addr) void play_dead(void) { - int *state_addr; + int prid_imp, prid_rev, *state_addr; unsigned int cpu = smp_processor_id(); void (*play_dead_at_ckseg1)(int *); idle_task_exit(); - switch (read_c0_prid() & PRID_REV_MASK) { + + prid_imp = read_c0_prid() & PRID_IMP_MASK; + prid_rev = read_c0_prid() & PRID_REV_MASK; + + if (prid_imp == PRID_IMP_LOONGSON_64G) { + play_dead_at_ckseg1 = + (void *)CKSEG1ADDR((unsigned long)loongson3_type3_play_dead); + goto out; + } + + switch (prid_rev) { case PRID_REV_LOONGSON3A_R1: default: play_dead_at_ckseg1 = - (void *)CKSEG1ADDR((unsigned long)loongson3a_r1_play_dead); + (void *)CKSEG1ADDR((unsigned long)loongson3_type1_play_dead); + break; + case PRID_REV_LOONGSON3B_R1: + case PRID_REV_LOONGSON3B_R2: + play_dead_at_ckseg1 = + (void *)CKSEG1ADDR((unsigned long)loongson3_type2_play_dead); break; case PRID_REV_LOONGSON3A_R2_0: case PRID_REV_LOONGSON3A_R2_1: case PRID_REV_LOONGSON3A_R3_0: case PRID_REV_LOONGSON3A_R3_1: play_dead_at_ckseg1 = - (void *)CKSEG1ADDR((unsigned long)loongson3a_r2r3_play_dead); - break; - case PRID_REV_LOONGSON3B_R1: - case PRID_REV_LOONGSON3B_R2: - play_dead_at_ckseg1 = - (void *)CKSEG1ADDR((unsigned long)loongson3b_play_dead); + (void *)CKSEG1ADDR((unsigned long)loongson3_type3_play_dead); break; } + +out: state_addr = &per_cpu(cpu_state, cpu); mb(); play_dead_at_ckseg1(state_addr); diff --git a/arch/mips/loongson64/loongson-3/smp.h b/arch/mips/loongson64/smp.h index 957bde81e0e4..957bde81e0e4 100644 --- a/arch/mips/loongson64/loongson-3/smp.h +++ b/arch/mips/loongson64/smp.h diff --git a/arch/mips/loongson64/common/time.c b/arch/mips/loongson64/time.c index e78760ce475b..1245f22cec84 100644 --- a/arch/mips/loongson64/common/time.c +++ b/arch/mips/loongson64/time.c @@ -11,7 +11,6 @@ #include <asm/hpet.h> #include <loongson.h> -#include <cs5536/cs5536_mfgpt.h> void __init plat_time_init(void) { @@ -20,8 +19,6 @@ void __init plat_time_init(void) #ifdef CONFIG_RS780_HPET setup_hpet_timer(); -#else - setup_mfgpt0_timer(); #endif } |