diff options
Diffstat (limited to 'arch/mips/mips-boards/generic')
| -rw-r--r-- | arch/mips/mips-boards/generic/Makefile | 29 | ||||
| -rw-r--r-- | arch/mips/mips-boards/generic/amon.c | 80 | ||||
| -rw-r--r-- | arch/mips/mips-boards/generic/cmdline.c | 59 | ||||
| -rw-r--r-- | arch/mips/mips-boards/generic/console.c | 68 | ||||
| -rw-r--r-- | arch/mips/mips-boards/generic/display.c | 63 | ||||
| -rw-r--r-- | arch/mips/mips-boards/generic/gdb_hook.c | 133 | ||||
| -rw-r--r-- | arch/mips/mips-boards/generic/init.c | 436 | ||||
| -rw-r--r-- | arch/mips/mips-boards/generic/memory.c | 183 | ||||
| -rw-r--r-- | arch/mips/mips-boards/generic/pci.c | 243 | ||||
| -rw-r--r-- | arch/mips/mips-boards/generic/reset.c | 75 | ||||
| -rw-r--r-- | arch/mips/mips-boards/generic/time.c | 186 |
11 files changed, 0 insertions, 1555 deletions
diff --git a/arch/mips/mips-boards/generic/Makefile b/arch/mips/mips-boards/generic/Makefile deleted file mode 100644 index f7f87fc09d1e..000000000000 --- a/arch/mips/mips-boards/generic/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# Makefile for the MIPS boards generic routines under Linux. -# - -obj-y := reset.o display.o init.o memory.o \ - cmdline.o time.o -obj-y += amon.o - -obj-$(CONFIG_EARLY_PRINTK) += console.o -obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_KGDB) += gdb_hook.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mips-boards/generic/amon.c deleted file mode 100644 index 96236bf33838..000000000000 --- a/arch/mips/mips-boards/generic/amon.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Copyright (C) 2007 MIPS Technologies, Inc. - * All rights reserved. - - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Arbitrary Monitor interface - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/smp.h> - -#include <asm-mips/addrspace.h> -#include <asm-mips/mips-boards/launch.h> -#include <asm-mips/mipsmtregs.h> - -int amon_cpu_avail(int cpu) -{ - struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); - - if (cpu < 0 || cpu >= NCPULAUNCH) { - pr_debug("avail: cpu%d is out of range\n", cpu); - return 0; - } - - launch += cpu; - if (!(launch->flags & LAUNCH_FREADY)) { - pr_debug("avail: cpu%d is not ready\n", cpu); - return 0; - } - if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) { - pr_debug("avail: too late.. cpu%d is already gone\n", cpu); - return 0; - } - - return 1; -} - -void amon_cpu_start(int cpu, - unsigned long pc, unsigned long sp, - unsigned long gp, unsigned long a0) -{ - volatile struct cpulaunch *launch = - (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); - - if (!amon_cpu_avail(cpu)) - return; - if (cpu == smp_processor_id()) { - pr_debug("launch: I am cpu%d!\n", cpu); - return; - } - launch += cpu; - - pr_debug("launch: starting cpu%d\n", cpu); - - launch->pc = pc; - launch->gp = gp; - launch->sp = sp; - launch->a0 = a0; - - /* Make sure target sees parameters before the go bit */ - smp_mb(); - - launch->flags |= LAUNCH_FGO; - while ((launch->flags & LAUNCH_FGONE) == 0) - ; - pr_debug("launch: cpu%d gone!\n", cpu); -} diff --git a/arch/mips/mips-boards/generic/cmdline.c b/arch/mips/mips-boards/generic/cmdline.c deleted file mode 100644 index 1871c30ed2eb..000000000000 --- a/arch/mips/mips-boards/generic/cmdline.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Kernel command line creation using the prom monitor (YAMON) argc/argv. - */ -#include <linux/init.h> -#include <linux/string.h> - -#include <asm/bootinfo.h> - -extern int prom_argc; -extern int *_prom_argv; - -/* - * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. - * This macro take care of sign extension. - */ -#define prom_argv(index) ((char *)(long)_prom_argv[(index)]) - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - - -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { - strcpy(cp, prom_argv(actr)); - cp += strlen(prom_argv(actr)); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) { - /* get rid of trailing space */ - --cp; - *cp = '\0'; - } -} diff --git a/arch/mips/mips-boards/generic/console.c b/arch/mips/mips-boards/generic/console.c deleted file mode 100644 index 4d8ab99e4155..000000000000 --- a/arch/mips/mips-boards/generic/console.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Putting things on the screen/serial line using YAMONs facilities. - */ -#include <linux/console.h> -#include <linux/init.h> -#include <linux/serial_reg.h> -#include <asm/io.h> - -#ifdef CONFIG_MIPS_ATLAS -#include <asm/mips-boards/atlas.h> - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define PORT(offset) (ATLAS_UART_REGS_BASE + ((offset)<<3)) -#else -#define PORT(offset) (ATLAS_UART_REGS_BASE + 3 + ((offset)<<3)) -#endif - -#elif defined(CONFIG_MIPS_SEAD) - -#include <asm/mips-boards/sead.h> - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define PORT(offset) (SEAD_UART0_REGS_BASE + ((offset)<<3)) -#else -#define PORT(offset) (SEAD_UART0_REGS_BASE + 3 + ((offset)<<3)) -#endif - -#else - -#define PORT(offset) (0x3f8 + (offset)) - -#endif - -static inline unsigned int serial_in(int offset) -{ - return inb(PORT(offset)); -} - -static inline void serial_out(int offset, int value) -{ - outb(value, PORT(offset)); -} - -int prom_putchar(char c) -{ - while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0) - ; - - serial_out(UART_TX, c); - - return 1; -} diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mips-boards/generic/display.c deleted file mode 100644 index 2a0057cfc30d..000000000000 --- a/arch/mips/mips-boards/generic/display.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Display routines for display messages in MIPS boards ascii display. - */ - -#include <linux/compiler.h> -#include <linux/timer.h> -#include <asm/io.h> -#include <asm/mips-boards/generic.h> - -extern const char display_string[]; -static unsigned int display_count; -static unsigned int max_display_count; - -void mips_display_message(const char *str) -{ - static unsigned int __iomem *display = NULL; - int i; - - if (unlikely(display == NULL)) - display = ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int)); - - for (i = 0; i <= 14; i=i+2) { - if (*str) - __raw_writel(*str++, display + i); - else - __raw_writel(' ', display + i); - } -} - -static void scroll_display_message(unsigned long data); -static DEFINE_TIMER(mips_scroll_timer, scroll_display_message, HZ, 0); - -static void scroll_display_message(unsigned long data) -{ - mips_display_message(&display_string[display_count++]); - if (display_count == max_display_count) - display_count = 0; - - mod_timer(&mips_scroll_timer, jiffies + HZ); -} - -void mips_scroll_message(void) -{ - del_timer_sync(&mips_scroll_timer); - max_display_count = strlen(display_string) + 1 - 8; - mod_timer(&mips_scroll_timer, jiffies + 1); -} diff --git a/arch/mips/mips-boards/generic/gdb_hook.c b/arch/mips/mips-boards/generic/gdb_hook.c deleted file mode 100644 index 6a1854de4579..000000000000 --- a/arch/mips/mips-boards/generic/gdb_hook.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * This is the interface to the remote debugger stub. - */ -#include <linux/types.h> -#include <linux/serial.h> -#include <linux/serialP.h> -#include <linux/serial_reg.h> - -#include <asm/serial.h> -#include <asm/io.h> - -static struct serial_state rs_table[] = { - SERIAL_PORT_DFNS /* Defined in serial.h */ -}; - -static struct async_struct kdb_port_info = {0}; - -int (*generic_putDebugChar)(char); -char (*generic_getDebugChar)(void); - -static __inline__ unsigned int serial_in(struct async_struct *info, int offset) -{ - return inb(info->port + offset); -} - -static __inline__ void serial_out(struct async_struct *info, int offset, - int value) -{ - outb(value, info->port+offset); -} - -int rs_kgdb_hook(int tty_no, int speed) { - int t; - struct serial_state *ser = &rs_table[tty_no]; - - kdb_port_info.state = ser; - kdb_port_info.magic = SERIAL_MAGIC; - kdb_port_info.port = ser->port; - kdb_port_info.flags = ser->flags; - - /* - * Clear all interrupts - */ - serial_in(&kdb_port_info, UART_LSR); - serial_in(&kdb_port_info, UART_RX); - serial_in(&kdb_port_info, UART_IIR); - serial_in(&kdb_port_info, UART_MSR); - - /* - * Now, initialize the UART - */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */ - if (kdb_port_info.flags & ASYNC_FOURPORT) { - kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS; - t = UART_MCR_DTR | UART_MCR_OUT1; - } else { - kdb_port_info.MCR - = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; - t = UART_MCR_DTR | UART_MCR_RTS; - } - - kdb_port_info.MCR = t; /* no interrupts, please */ - serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR); - - /* - * and set the speed of the serial port - */ - if (speed == 0) - speed = 9600; - - t = kdb_port_info.state->baud_base / speed; - /* set DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB); - serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */ - serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */ - /* reset DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); - - return speed; -} - -int putDebugChar(char c) -{ - return generic_putDebugChar(c); -} - -char getDebugChar(void) -{ - return generic_getDebugChar(); -} - -int rs_putDebugChar(char c) -{ - - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0) - ; - - serial_out(&kdb_port_info, UART_TX, c); - - return 1; -} - -char rs_getDebugChar(void) -{ - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while (!(serial_in(&kdb_port_info, UART_LSR) & 1)) - ; - - return serial_in(&kdb_port_info, UART_RX); -} diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c deleted file mode 100644 index 83b9dc739203..000000000000 --- a/arch/mips/mips-boards/generic/init.c +++ /dev/null @@ -1,436 +0,0 @@ -/* - * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. - * All rights reserved. - * Authors: Carsten Langgaard <carstenl@mips.com> - * Maciej W. Rozycki <macro@mips.com> - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * PROM library initialisation code. - */ -#include <linux/init.h> -#include <linux/string.h> -#include <linux/kernel.h> - -#include <asm/bootinfo.h> -#include <asm/gt64120.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/cacheflush.h> -#include <asm/traps.h> - -#include <asm/mips-boards/prom.h> -#include <asm/mips-boards/generic.h> -#include <asm/mips-boards/bonito64.h> -#include <asm/mips-boards/msc01_pci.h> - -#include <asm/mips-boards/malta.h> - -#ifdef CONFIG_KGDB -extern int rs_kgdb_hook(int, int); -extern int rs_putDebugChar(char); -extern char rs_getDebugChar(void); -extern int saa9730_kgdb_hook(int); -extern int saa9730_putDebugChar(char); -extern char saa9730_getDebugChar(void); -#endif - -int prom_argc; -int *_prom_argv, *_prom_envp; - -/* - * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. - * This macro take care of sign extension, if running in 64-bit mode. - */ -#define prom_envp(index) ((char *)(long)_prom_envp[(index)]) - -int init_debug = 0; - -int mips_revision_corid; -int mips_revision_sconid; - -/* Bonito64 system controller register base. */ -unsigned long _pcictrl_bonito; -unsigned long _pcictrl_bonito_pcicfg; - -/* GT64120 system controller register base */ -unsigned long _pcictrl_gt64120; - -/* MIPS System controller register base */ -unsigned long _pcictrl_msc; - -char *prom_getenv(char *envname) -{ - /* - * Return a pointer to the given environment variable. - * In 64-bit mode: we're using 64-bit pointers, but all pointers - * in the PROM structures are only 32-bit, so we need some - * workarounds, if we are running in 64-bit mode. - */ - int i, index=0; - - i = strlen(envname); - - while (prom_envp(index)) { - if(strncmp(envname, prom_envp(index), i) == 0) { - return(prom_envp(index+1)); - } - index += 2; - } - - return NULL; -} - -static inline unsigned char str2hexnum(unsigned char c) -{ - if (c >= '0' && c <= '9') - return c - '0'; - if (c >= 'a' && c <= 'f') - return c - 'a' + 10; - return 0; /* foo */ -} - -static inline void str2eaddr(unsigned char *ea, unsigned char *str) -{ - int i; - - for (i = 0; i < 6; i++) { - unsigned char num; - - if((*str == '.') || (*str == ':')) - str++; - num = str2hexnum(*str++) << 4; - num |= (str2hexnum(*str++)); - ea[i] = num; - } -} - -int get_ethernet_addr(char *ethernet_addr) -{ - char *ethaddr_str; - - ethaddr_str = prom_getenv("ethaddr"); - if (!ethaddr_str) { - printk("ethaddr not set in boot prom\n"); - return -1; - } - str2eaddr(ethernet_addr, ethaddr_str); - - if (init_debug > 1) { - int i; - printk("get_ethernet_addr: "); - for (i=0; i<5; i++) - printk("%02x:", (unsigned char)*(ethernet_addr+i)); - printk("%02x\n", *(ethernet_addr+i)); - } - - return 0; -} - -#ifdef CONFIG_SERIAL_8250_CONSOLE -static void __init console_config(void) -{ - char console_string[40]; - int baud = 0; - char parity = '\0', bits = '\0', flow = '\0'; - char *s; - - if ((strstr(prom_getcmdline(), "console=")) == NULL) { - s = prom_getenv("modetty0"); - if (s) { - while (*s >= '0' && *s <= '9') - baud = baud*10 + *s++ - '0'; - if (*s == ',') s++; - if (*s) parity = *s++; - if (*s == ',') s++; - if (*s) bits = *s++; - if (*s == ',') s++; - if (*s == 'h') flow = 'r'; - } - if (baud == 0) - baud = 38400; - if (parity != 'n' && parity != 'o' && parity != 'e') - parity = 'n'; - if (bits != '7' && bits != '8') - bits = '8'; - if (flow == '\0') - flow = 'r'; - sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, parity, bits, flow); - strcat(prom_getcmdline(), console_string); - pr_info("Config serial console:%s\n", console_string); - } -} -#endif - -#ifdef CONFIG_KGDB -void __init kgdb_config(void) -{ - extern int (*generic_putDebugChar)(char); - extern char (*generic_getDebugChar)(void); - char *argptr; - int line, speed; - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { - argptr += strlen("kgdb=ttyS"); - if (*argptr != '0' && *argptr != '1') - printk("KGDB: Unknown serial line /dev/ttyS%c, " - "falling back to /dev/ttyS1\n", *argptr); - line = *argptr == '0' ? 0 : 1; - printk("KGDB: Using serial line /dev/ttyS%d for session\n", line); - - speed = 0; - if (*++argptr == ',') - { - int c; - while ((c = *++argptr) && ('0' <= c && c <= '9')) - speed = speed * 10 + c - '0'; - } -#ifdef CONFIG_MIPS_ATLAS - if (line == 1) { - speed = saa9730_kgdb_hook(speed); - generic_putDebugChar = saa9730_putDebugChar; - generic_getDebugChar = saa9730_getDebugChar; - } - else -#endif - { - speed = rs_kgdb_hook(line, speed); - generic_putDebugChar = rs_putDebugChar; - generic_getDebugChar = rs_getDebugChar; - } - - pr_info("KGDB: Using serial line /dev/ttyS%d at %d for " - "session, please connect your debugger\n", - line ? 1 : 0, speed); - - { - char *s; - for (s = "Please connect GDB to this port\r\n"; *s; ) - generic_putDebugChar(*s++); - } - - /* Breakpoint is invoked after interrupts are initialised */ - } -} -#endif - -static void __init mips_nmi_setup(void) -{ - void *base; - extern char except_vec_nmi; - - base = cpu_has_veic ? - (void *)(CAC_BASE + 0xa80) : - (void *)(CAC_BASE + 0x380); - memcpy(base, &except_vec_nmi, 0x80); - flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); -} - -static void __init mips_ejtag_setup(void) -{ - void *base; - extern char except_vec_ejtag_debug; - - base = cpu_has_veic ? - (void *)(CAC_BASE + 0xa00) : - (void *)(CAC_BASE + 0x300); - memcpy(base, &except_vec_ejtag_debug, 0x80); - flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); -} - -extern struct plat_smp_ops msmtc_smp_ops; - -void __init prom_init(void) -{ - prom_argc = fw_arg0; - _prom_argv = (int *) fw_arg1; - _prom_envp = (int *) fw_arg2; - - mips_display_message("LINUX"); - -#ifdef CONFIG_MIPS_SEAD - set_io_port_base(KSEG1); -#else - /* - * early setup of _pcictrl_bonito so that we can determine - * the system controller on a CORE_EMUL board - */ - _pcictrl_bonito = (unsigned long)ioremap(BONITO_REG_BASE, BONITO_REG_SIZE); - - mips_revision_corid = MIPS_REVISION_CORID; - - if (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL) { - if (BONITO_PCIDID == 0x0001df53 || - BONITO_PCIDID == 0x0003df53) - mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_BON; - else - mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_MSC; - } - - mips_revision_sconid = MIPS_REVISION_SCONID; - if (mips_revision_sconid == MIPS_REVISION_SCON_OTHER) { - switch (mips_revision_corid) { - case MIPS_REVISION_CORID_QED_RM5261: - case MIPS_REVISION_CORID_CORE_LV: - case MIPS_REVISION_CORID_CORE_FPGA: - case MIPS_REVISION_CORID_CORE_FPGAR2: - mips_revision_sconid = MIPS_REVISION_SCON_GT64120; - break; - case MIPS_REVISION_CORID_CORE_EMUL_BON: - case MIPS_REVISION_CORID_BONITO64: - case MIPS_REVISION_CORID_CORE_20K: - mips_revision_sconid = MIPS_REVISION_SCON_BONITO; - break; - case MIPS_REVISION_CORID_CORE_MSC: - case MIPS_REVISION_CORID_CORE_FPGA2: - case MIPS_REVISION_CORID_CORE_24K: - /* - * SOCit/ROCit support is essentially identical - * but make an attempt to distinguish them - */ - mips_revision_sconid = MIPS_REVISION_SCON_SOCIT; - break; - case MIPS_REVISION_CORID_CORE_FPGA3: - case MIPS_REVISION_CORID_CORE_FPGA4: - case MIPS_REVISION_CORID_CORE_FPGA5: - case MIPS_REVISION_CORID_CORE_EMUL_MSC: - default: - /* See above */ - mips_revision_sconid = MIPS_REVISION_SCON_ROCIT; - break; - } - } - - switch (mips_revision_sconid) { - u32 start, map, mask, data; - - case MIPS_REVISION_SCON_GT64120: - /* - * Setup the North bridge to do Master byte-lane swapping - * when running in bigendian. - */ - _pcictrl_gt64120 = (unsigned long)ioremap(MIPS_GT_BASE, 0x2000); - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - GT_WRITE(GT_PCI0_CMD_OFS, GT_PCI0_CMD_MBYTESWAP_BIT | - GT_PCI0_CMD_SBYTESWAP_BIT); -#else - GT_WRITE(GT_PCI0_CMD_OFS, 0); -#endif - /* Fix up PCI I/O mapping if necessary (for Atlas). */ - start = GT_READ(GT_PCI0IOLD_OFS); - map = GT_READ(GT_PCI0IOREMAP_OFS); - if ((start & map) != 0) { - map &= ~start; - GT_WRITE(GT_PCI0IOREMAP_OFS, map); - } - - set_io_port_base(MALTA_GT_PORT_BASE); - break; - - case MIPS_REVISION_SCON_BONITO: - _pcictrl_bonito_pcicfg = (unsigned long)ioremap(BONITO_PCICFG_BASE, BONITO_PCICFG_SIZE); - - /* - * Disable Bonito IOBC. - */ - BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & - ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | - BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); - - /* - * Setup the North bridge to do Master byte-lane swapping - * when running in bigendian. - */ -#ifdef CONFIG_CPU_LITTLE_ENDIAN - BONITO_BONGENCFG = BONITO_BONGENCFG & - ~(BONITO_BONGENCFG_MSTRBYTESWAP | - BONITO_BONGENCFG_BYTESWAP); -#else - BONITO_BONGENCFG = BONITO_BONGENCFG | - BONITO_BONGENCFG_MSTRBYTESWAP | - BONITO_BONGENCFG_BYTESWAP; -#endif - - set_io_port_base(MALTA_BONITO_PORT_BASE); - break; - - case MIPS_REVISION_SCON_SOCIT: - case MIPS_REVISION_SCON_ROCIT: - _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000); - mips_pci_controller: - mb(); - MSC_READ(MSC01_PCI_CFG, data); - MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT); - wmb(); - - /* Fix up lane swapping. */ -#ifdef CONFIG_CPU_LITTLE_ENDIAN - MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP); -#else - MSC_WRITE(MSC01_PCI_SWAP, - MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_IO_SHF | - MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF | - MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF); -#endif - /* Fix up target memory mapping. */ - MSC_READ(MSC01_PCI_BAR0, mask); - MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK); - - /* Don't handle target retries indefinitely. */ - if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) == - MSC01_PCI_CFG_MAXRTRY_MSK) - data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK << - MSC01_PCI_CFG_MAXRTRY_SHF)) | - ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) << - MSC01_PCI_CFG_MAXRTRY_SHF); - - wmb(); - MSC_WRITE(MSC01_PCI_CFG, data); - mb(); - - set_io_port_base(MALTA_MSC_PORT_BASE); - break; - - case MIPS_REVISION_SCON_SOCITSC: - case MIPS_REVISION_SCON_SOCITSCP: - _pcictrl_msc = (unsigned long)ioremap(MIPS_SOCITSC_PCI_REG_BASE, 0x2000); - goto mips_pci_controller; - - default: - /* Unknown system controller */ - mips_display_message("SC Error"); - while (1); /* We die here... */ - } -#endif - board_nmi_handler_setup = mips_nmi_setup; - board_ejtag_handler_setup = mips_ejtag_setup; - - pr_info("\nLINUX started...\n"); - prom_init_cmdline(); - prom_meminit(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - console_config(); -#endif -#ifdef CONFIG_MIPS_CMP - register_smp_ops(&cmp_smp_ops); -#endif -#ifdef CONFIG_MIPS_MT_SMP - register_smp_ops(&vsmp_smp_ops); -#endif -#ifdef CONFIG_MIPS_MT_SMTC - register_smp_ops(&msmtc_smp_ops); -#endif -} diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c deleted file mode 100644 index 5e443bba5662..000000000000 --- a/arch/mips/mips-boards/generic/memory.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * PROM library functions for acquiring/using memory descriptors given to - * us from the YAMON. - */ -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/bootmem.h> -#include <linux/pfn.h> -#include <linux/string.h> - -#include <asm/bootinfo.h> -#include <asm/page.h> -#include <asm/sections.h> - -#include <asm/mips-boards/prom.h> - -/*#define DEBUG*/ - -enum yamon_memtypes { - yamon_dontuse, - yamon_prom, - yamon_free, -}; -static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; - -#ifdef DEBUG -static char *mtypes[3] = { - "Dont use memory", - "YAMON PROM memory", - "Free memmory", -}; -#endif - -/* determined physical memory size, not overridden by command line args */ -unsigned long physical_memsize = 0L; - -static struct prom_pmemblock * __init prom_getmdesc(void) -{ - char *memsize_str; - unsigned int memsize; - char cmdline[CL_SIZE], *ptr; - - /* otherwise look in the environment */ - memsize_str = prom_getenv("memsize"); - if (!memsize_str) { - printk(KERN_WARNING - "memsize not set in boot prom, set to default (32Mb)\n"); - physical_memsize = 0x02000000; - } else { -#ifdef DEBUG - pr_debug("prom_memsize = %s\n", memsize_str); -#endif - physical_memsize = simple_strtol(memsize_str, NULL, 0); - } - -#ifdef CONFIG_CPU_BIG_ENDIAN - /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last - word of physical memory */ - physical_memsize -= PAGE_SIZE; -#endif - - /* Check the command line for a memsize directive that overrides - the physical/default amount */ - strcpy(cmdline, arcs_cmdline); - ptr = strstr(cmdline, "memsize="); - if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) - ptr = strstr(ptr, " memsize="); - - if (ptr) - memsize = memparse(ptr + 8, &ptr); - else - memsize = physical_memsize; - - memset(mdesc, 0, sizeof(mdesc)); - - mdesc[0].type = yamon_dontuse; - mdesc[0].base = 0x00000000; - mdesc[0].size = 0x00001000; - - mdesc[1].type = yamon_prom; - mdesc[1].base = 0x00001000; - mdesc[1].size = 0x000ef000; - -#ifdef CONFIG_MIPS_MALTA - /* - * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the - * south bridge and PCI access always forwarded to the ISA Bus and - * BIOSCS# is always generated. - * This mean that this area can't be used as DMA memory for PCI - * devices. - */ - mdesc[2].type = yamon_dontuse; - mdesc[2].base = 0x000f0000; - mdesc[2].size = 0x00010000; -#else - mdesc[2].type = yamon_prom; - mdesc[2].base = 0x000f0000; - mdesc[2].size = 0x00010000; -#endif - - mdesc[3].type = yamon_dontuse; - mdesc[3].base = 0x00100000; - mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - mdesc[3].base; - - mdesc[4].type = yamon_free; - mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end)); - mdesc[4].size = memsize - mdesc[4].base; - - return &mdesc[0]; -} - -static int __init prom_memtype_classify(unsigned int type) -{ - switch (type) { - case yamon_free: - return BOOT_MEM_RAM; - case yamon_prom: - return BOOT_MEM_ROM_DATA; - default: - return BOOT_MEM_RESERVED; - } -} - -void __init prom_meminit(void) -{ - struct prom_pmemblock *p; - -#ifdef DEBUG - pr_debug("YAMON MEMORY DESCRIPTOR dump:\n"); - p = prom_getmdesc(); - while (p->size) { - int i = 0; - pr_debug("[%d,%p]: base<%08lx> size<%08lx> type<%s>\n", - i, p, p->base, p->size, mtypes[p->type]); - p++; - i++; - } -#endif - p = prom_getmdesc(); - - while (p->size) { - long type; - unsigned long base, size; - - type = prom_memtype_classify(p->type); - base = p->base; - size = p->size; - - add_memory_region(base, size, type); - p++; - } -} - -void __init prom_free_prom_memory(void) -{ - unsigned long addr; - int i; - - for (i = 0; i < boot_mem_map.nr_map; i++) { - if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) - continue; - - addr = boot_mem_map.map[i].addr; - free_init_pages("prom memory", - addr, addr + boot_mem_map.map[i].size); - } -} diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c deleted file mode 100644 index b9743190609a..000000000000 --- a/arch/mips/mips-boards/generic/pci.c +++ /dev/null @@ -1,243 +0,0 @@ -/* - * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. - * All rights reserved. - * Authors: Carsten Langgaard <carstenl@mips.com> - * Maciej W. Rozycki <macro@mips.com> - * - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * MIPS boards specific PCI support. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/gt64120.h> - -#include <asm/mips-boards/generic.h> -#include <asm/mips-boards/bonito64.h> -#include <asm/mips-boards/msc01_pci.h> - -static struct resource bonito64_mem_resource = { - .name = "Bonito PCI MEM", - .flags = IORESOURCE_MEM, -}; - -static struct resource bonito64_io_resource = { - .name = "Bonito PCI I/O", - .start = 0x00000000UL, - .end = 0x000fffffUL, - .flags = IORESOURCE_IO, -}; - -static struct resource gt64120_mem_resource = { - .name = "GT-64120 PCI MEM", - .flags = IORESOURCE_MEM, -}; - -static struct resource gt64120_io_resource = { - .name = "GT-64120 PCI I/O", - .flags = IORESOURCE_IO, -}; - -static struct resource msc_mem_resource = { - .name = "MSC PCI MEM", - .flags = IORESOURCE_MEM, -}; - -static struct resource msc_io_resource = { - .name = "MSC PCI I/O", - .flags = IORESOURCE_IO, -}; - -extern struct pci_ops bonito64_pci_ops; -extern struct pci_ops gt64xxx_pci0_ops; -extern struct pci_ops msc_pci_ops; - -static struct pci_controller bonito64_controller = { - .pci_ops = &bonito64_pci_ops, - .io_resource = &bonito64_io_resource, - .mem_resource = &bonito64_mem_resource, - .io_offset = 0x00000000UL, -}; - -static struct pci_controller gt64120_controller = { - .pci_ops = >64xxx_pci0_ops, - .io_resource = >64120_io_resource, - .mem_resource = >64120_mem_resource, -}; - -static struct pci_controller msc_controller = { - .pci_ops = &msc_pci_ops, - .io_resource = &msc_io_resource, - .mem_resource = &msc_mem_resource, -}; - -void __init mips_pcibios_init(void) -{ - struct pci_controller *controller; - resource_size_t start, end, map, start1, end1, map1, map2, map3, mask; - - switch (mips_revision_sconid) { - case MIPS_REVISION_SCON_GT64120: - /* - * Due to a bug in the Galileo system controller, we need - * to setup the PCI BAR for the Galileo internal registers. - * This should be done in the bios/bootprom and will be - * fixed in a later revision of YAMON (the MIPS boards - * boot prom). - */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, - (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | /* Local bus */ - (0 << GT_PCI0_CFGADDR_DEVNUM_SHF) | /* GT64120 dev */ - (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | /* Function 0*/ - ((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) | /* BAR 4*/ - GT_PCI0_CFGADDR_CONFIGEN_BIT); - - /* Perform the write */ - GT_WRITE(GT_PCI0_CFGDATA_OFS, CPHYSADDR(MIPS_GT_BASE)); - - /* Set up resource ranges from the controller's registers. */ - start = GT_READ(GT_PCI0M0LD_OFS); - end = GT_READ(GT_PCI0M0HD_OFS); - map = GT_READ(GT_PCI0M0REMAP_OFS); - end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK); - start1 = GT_READ(GT_PCI0M1LD_OFS); - end1 = GT_READ(GT_PCI0M1HD_OFS); - map1 = GT_READ(GT_PCI0M1REMAP_OFS); - end1 = (end1 & GT_PCI_HD_MSK) | (start1 & ~GT_PCI_HD_MSK); - /* Cannot support multiple windows, use the wider. */ - if (end1 - start1 > end - start) { - start = start1; - end = end1; - map = map1; - } - mask = ~(start ^ end); - /* We don't support remapping with a discontiguous mask. */ - BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && - mask != ~((mask & -mask) - 1)); - gt64120_mem_resource.start = start; - gt64120_mem_resource.end = end; - gt64120_controller.mem_offset = (start & mask) - (map & mask); - /* Addresses are 36-bit, so do shifts in the destinations. */ - gt64120_mem_resource.start <<= GT_PCI_DCRM_SHF; - gt64120_mem_resource.end <<= GT_PCI_DCRM_SHF; - gt64120_mem_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1; - gt64120_controller.mem_offset <<= GT_PCI_DCRM_SHF; - - start = GT_READ(GT_PCI0IOLD_OFS); - end = GT_READ(GT_PCI0IOHD_OFS); - map = GT_READ(GT_PCI0IOREMAP_OFS); - end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK); - mask = ~(start ^ end); - /* We don't support remapping with a discontiguous mask. */ - BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && - mask != ~((mask & -mask) - 1)); - gt64120_io_resource.start = map & mask; - gt64120_io_resource.end = (map & mask) | ~mask; - gt64120_controller.io_offset = 0; - /* Addresses are 36-bit, so do shifts in the destinations. */ - gt64120_io_resource.start <<= GT_PCI_DCRM_SHF; - gt64120_io_resource.end <<= GT_PCI_DCRM_SHF; - gt64120_io_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1; - - controller = >64120_controller; - break; - - case MIPS_REVISION_SCON_BONITO: - /* Set up resource ranges from the controller's registers. */ - map = BONITO_PCIMAP; - map1 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO0) >> - BONITO_PCIMAP_PCIMAP_LO0_SHIFT; - map2 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO1) >> - BONITO_PCIMAP_PCIMAP_LO1_SHIFT; - map3 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO2) >> - BONITO_PCIMAP_PCIMAP_LO2_SHIFT; - /* Combine as many adjacent windows as possible. */ - map = map1; - start = BONITO_PCILO0_BASE; - end = 1; - if (map3 == map2 + 1) { - map = map2; - start = BONITO_PCILO1_BASE; - end++; - } - if (map2 == map1 + 1) { - map = map1; - start = BONITO_PCILO0_BASE; - end++; - } - bonito64_mem_resource.start = start; - bonito64_mem_resource.end = start + - BONITO_PCIMAP_WINBASE(end) - 1; - bonito64_controller.mem_offset = start - - BONITO_PCIMAP_WINBASE(map); - - controller = &bonito64_controller; - break; - - case MIPS_REVISION_SCON_SOCIT: - case MIPS_REVISION_SCON_ROCIT: - case MIPS_REVISION_SCON_SOCITSC: - case MIPS_REVISION_SCON_SOCITSCP: - /* Set up resource ranges from the controller's registers. */ - MSC_READ(MSC01_PCI_SC2PMBASL, start); - MSC_READ(MSC01_PCI_SC2PMMSKL, mask); - MSC_READ(MSC01_PCI_SC2PMMAPL, map); - msc_mem_resource.start = start & mask; - msc_mem_resource.end = (start & mask) | ~mask; - msc_controller.mem_offset = (start & mask) - (map & mask); - - MSC_READ(MSC01_PCI_SC2PIOBASL, start); - MSC_READ(MSC01_PCI_SC2PIOMSKL, mask); - MSC_READ(MSC01_PCI_SC2PIOMAPL, map); - msc_io_resource.start = map & mask; - msc_io_resource.end = (map & mask) | ~mask; - msc_controller.io_offset = 0; - ioport_resource.end = ~mask; - - /* If ranges overlap I/O takes precedence. */ - start = start & mask; - end = start | ~mask; - if ((start >= msc_mem_resource.start && - start <= msc_mem_resource.end) || - (end >= msc_mem_resource.start && - end <= msc_mem_resource.end)) { - /* Use the larger space. */ - start = max(start, msc_mem_resource.start); - end = min(end, msc_mem_resource.end); - if (start - msc_mem_resource.start >= - msc_mem_resource.end - end) - msc_mem_resource.end = start - 1; - else - msc_mem_resource.start = end + 1; - } - - controller = &msc_controller; - break; - default: - return; - } - - if (controller->io_resource->start < 0x00001000UL) /* FIXME */ - controller->io_resource->start = 0x00001000UL; - - iomem_resource.end &= 0xfffffffffULL; /* 64 GB */ - ioport_resource.end = controller->io_resource->end; - - register_pci_controller(controller); -} diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c deleted file mode 100644 index 583d468d98a9..000000000000 --- a/arch/mips/mips-boards/generic/reset.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Reset the MIPS boards. - * - */ -#include <linux/pm.h> - -#include <asm/io.h> -#include <asm/reboot.h> -#include <asm/mips-boards/generic.h> -#if defined(CONFIG_MIPS_ATLAS) -#include <asm/mips-boards/atlas.h> -#endif - -static void mips_machine_restart(char *command); -static void mips_machine_halt(void); -#if defined(CONFIG_MIPS_ATLAS) -static void atlas_machine_power_off(void); -#endif - -static void mips_machine_restart(char *command) -{ - unsigned int __iomem *softres_reg = - ioremap(SOFTRES_REG, sizeof(unsigned int)); - - __raw_writel(GORESET, softres_reg); -} - -static void mips_machine_halt(void) -{ - unsigned int __iomem *softres_reg = - ioremap(SOFTRES_REG, sizeof(unsigned int)); - - __raw_writel(GORESET, softres_reg); -} - -#if defined(CONFIG_MIPS_ATLAS) -static void atlas_machine_power_off(void) -{ - unsigned int __iomem *psustby_reg = ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int)); - - writew(ATLAS_GOSTBY, psustby_reg); -} -#endif - -void mips_reboot_setup(void) -{ - _machine_restart = mips_machine_restart; - _machine_halt = mips_machine_halt; -#if defined(CONFIG_MIPS_ATLAS) - pm_power_off = atlas_machine_power_off; -#endif -#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD) - pm_power_off = mips_machine_halt; -#endif -} diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c deleted file mode 100644 index fe2cac1b4514..000000000000 --- a/arch/mips/mips-boards/generic/time.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Setting up the clock on the MIPS boards. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/timex.h> -#include <linux/mc146818rtc.h> - -#include <asm/mipsregs.h> -#include <asm/mipsmtregs.h> -#include <asm/hardirq.h> -#include <asm/i8253.h> -#include <asm/irq.h> -#include <asm/div64.h> -#include <asm/cpu.h> -#include <asm/time.h> -#include <asm/mc146818-time.h> -#include <asm/msc01_ic.h> - -#include <asm/mips-boards/generic.h> -#include <asm/mips-boards/prom.h> - -#ifdef CONFIG_MIPS_ATLAS -#include <asm/mips-boards/atlasint.h> -#endif -#ifdef CONFIG_MIPS_MALTA -#include <asm/mips-boards/maltaint.h> -#endif -#ifdef CONFIG_MIPS_SEAD -#include <asm/mips-boards/seadint.h> -#endif - -unsigned long cpu_khz; - -static int mips_cpu_timer_irq; -static int mips_cpu_perf_irq; -extern int cp0_perfcount_irq; - -static void mips_timer_dispatch(void) -{ - do_IRQ(mips_cpu_timer_irq); -} - -static void mips_perf_dispatch(void) -{ - do_IRQ(mips_cpu_perf_irq); -} - -/* - * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect - */ -static unsigned int __init estimate_cpu_frequency(void) -{ - unsigned int prid = read_c0_prid() & 0xffff00; - unsigned int count; - -#if defined(CONFIG_MIPS_SEAD) || defined(CONFIG_MIPS_SIM) - /* - * The SEAD board doesn't have a real time clock, so we can't - * really calculate the timer frequency - * For now we hardwire the SEAD board frequency to 12MHz. - */ - - if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) || - (prid == (PRID_COMP_MIPS | PRID_IMP_25KF))) - count = 12000000; - else - count = 6000000; -#endif -#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA) - unsigned long flags; - unsigned int start; - - local_irq_save(flags); - - /* Start counter exactly on falling edge of update flag */ - while (CMOS_READ(RTC_REG_A) & RTC_UIP); - while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - - /* Start r4k counter. */ - start = read_c0_count(); - - /* Read counter exactly on falling edge of update flag */ - while (CMOS_READ(RTC_REG_A) & RTC_UIP); - while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - - count = read_c0_count() - start; - - /* restore interrupts */ - local_irq_restore(flags); -#endif - - mips_hpt_frequency = count; - if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && - (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) - count *= 2; - - count += 5000; /* round */ - count -= count%10000; - - return count; -} - -unsigned long read_persistent_clock(void) -{ - return mc146818_get_cmos_time(); -} - -static void __init plat_perf_setup(void) -{ -#ifdef MSC01E_INT_BASE - if (cpu_has_veic) { - set_vi_handler(MSC01E_INT_PERFCTR, mips_perf_dispatch); - mips_cpu_perf_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR; - } else -#endif - if (cp0_perfcount_irq >= 0) { - if (cpu_has_vint) - set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch); - mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq; -#ifdef CONFIG_SMP - set_irq_handler(mips_cpu_perf_irq, handle_percpu_irq); -#endif - } -} - -unsigned int __cpuinit get_c0_compare_int(void) -{ -#ifdef MSC01E_INT_BASE - if (cpu_has_veic) { - set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch); - mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR; - } else -#endif - { - if (cpu_has_vint) - set_vi_handler(cp0_compare_irq, mips_timer_dispatch); - mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; - } - - return mips_cpu_timer_irq; -} - -void __init plat_time_init(void) -{ - unsigned int est_freq; - - /* Set Data mode - binary. */ - CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); - - est_freq = estimate_cpu_frequency(); - - printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, - (est_freq%1000000)*100/1000000); - - cpu_khz = est_freq / 1000; - - mips_scroll_message(); -#ifdef CONFIG_I8253 /* Only Malta has a PIT */ - setup_pit_timer(); -#endif - - plat_perf_setup(); -} |