diff options
Diffstat (limited to 'arch/mips/nxp/pnx833x/common/platform.c')
| -rw-r--r-- | arch/mips/nxp/pnx833x/common/platform.c | 319 |
1 files changed, 0 insertions, 319 deletions
diff --git a/arch/mips/nxp/pnx833x/common/platform.c b/arch/mips/nxp/pnx833x/common/platform.c deleted file mode 100644 index 01f8345a2069..000000000000 --- a/arch/mips/nxp/pnx833x/common/platform.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * platform.c: platform support for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel <chris.steel@nxp.com> - * Daniel Laird <daniel.j.laird@nxp.com> - * - * Based on software written by: - * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/resource.h> -#include <linux/serial.h> -#include <linux/serial_pnx8xxx.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -#ifdef CONFIG_I2C_PNX0105 -/* Until i2c driver available in kernel.*/ -#include <linux/i2c-pnx0105.h> -#endif - -#include <irq.h> -#include <irq-mapping.h> -#include <pnx833x.h> - -static u64 uart_dmamask = DMA_BIT_MASK(32); - -static struct resource pnx833x_uart_resources[] = { - [0] = { - .start = PNX833X_UART0_PORTS_START, - .end = PNX833X_UART0_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX833X_PIC_UART0_INT, - .end = PNX833X_PIC_UART0_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = PNX833X_UART1_PORTS_START, - .end = PNX833X_UART1_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [3] = { - .start = PNX833X_PIC_UART1_INT, - .end = PNX833X_PIC_UART1_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct pnx8xxx_port pnx8xxx_ports[] = { - [0] = { - .port = { - .type = PORT_PNX8XXX, - .iotype = UPIO_MEM, - .membase = (void __iomem *)PNX833X_UART0_PORTS_START, - .mapbase = PNX833X_UART0_PORTS_START, - .irq = PNX833X_PIC_UART0_INT, - .uartclk = 3692300, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - }, - }, - [1] = { - .port = { - .type = PORT_PNX8XXX, - .iotype = UPIO_MEM, - .membase = (void __iomem *)PNX833X_UART1_PORTS_START, - .mapbase = PNX833X_UART1_PORTS_START, - .irq = PNX833X_PIC_UART1_INT, - .uartclk = 3692300, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, - }, - }, -}; - -static struct platform_device pnx833x_uart_device = { - .name = "pnx8xxx-uart", - .id = -1, - .dev = { - .dma_mask = &uart_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = pnx8xxx_ports, - }, - .num_resources = ARRAY_SIZE(pnx833x_uart_resources), - .resource = pnx833x_uart_resources, -}; - -static u64 ehci_dmamask = DMA_BIT_MASK(32); - -static struct resource pnx833x_usb_ehci_resources[] = { - [0] = { - .start = PNX833X_USB_PORTS_START, - .end = PNX833X_USB_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX833X_PIC_USB_INT, - .end = PNX833X_PIC_USB_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device pnx833x_usb_ehci_device = { - .name = "pnx833x-ehci", - .id = -1, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(pnx833x_usb_ehci_resources), - .resource = pnx833x_usb_ehci_resources, -}; - -#ifdef CONFIG_I2C_PNX0105 -static struct resource pnx833x_i2c0_resources[] = { - { - .start = PNX833X_I2C0_PORTS_START, - .end = PNX833X_I2C0_PORTS_END, - .flags = IORESOURCE_MEM, - }, - { - .start = PNX833X_PIC_I2C0_INT, - .end = PNX833X_PIC_I2C0_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource pnx833x_i2c1_resources[] = { - { - .start = PNX833X_I2C1_PORTS_START, - .end = PNX833X_I2C1_PORTS_END, - .flags = IORESOURCE_MEM, - }, - { - .start = PNX833X_PIC_I2C1_INT, - .end = PNX833X_PIC_I2C1_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = { - { - .base = PNX833X_I2C0_PORTS_START, - .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */ - .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Prefered HDCP) */ - .bus_addr = 0, /* no slave support */ - }, - { - .base = PNX833X_I2C1_PORTS_START, - .irq = -1, /* on high freq, polling is faster */ - /*.irq = PNX833X_PIC_I2C1_INT,*/ - .clock = 4, /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */ - .bus_addr = 0, /* no slave support */ - }, -}; - -static struct platform_device pnx833x_i2c0_device = { - .name = "i2c-pnx0105", - .id = 0, - .dev = { - .platform_data = &pnx833x_i2c_dev[0], - }, - .num_resources = ARRAY_SIZE(pnx833x_i2c0_resources), - .resource = pnx833x_i2c0_resources, -}; - -static struct platform_device pnx833x_i2c1_device = { - .name = "i2c-pnx0105", - .id = 1, - .dev = { - .platform_data = &pnx833x_i2c_dev[1], - }, - .num_resources = ARRAY_SIZE(pnx833x_i2c1_resources), - .resource = pnx833x_i2c1_resources, -}; -#endif - -static u64 ethernet_dmamask = DMA_BIT_MASK(32); - -static struct resource pnx833x_ethernet_resources[] = { - [0] = { - .start = PNX8335_IP3902_PORTS_START, - .end = PNX8335_IP3902_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX8335_PIC_ETHERNET_INT, - .end = PNX8335_PIC_ETHERNET_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device pnx833x_ethernet_device = { - .name = "ip3902-eth", - .id = -1, - .dev = { - .dma_mask = ðernet_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(pnx833x_ethernet_resources), - .resource = pnx833x_ethernet_resources, -}; - -static struct resource pnx833x_sata_resources[] = { - [0] = { - .start = PNX8335_SATA_PORTS_START, - .end = PNX8335_SATA_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX8335_PIC_SATA_INT, - .end = PNX8335_PIC_SATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device pnx833x_sata_device = { - .name = "pnx833x-sata", - .id = -1, - .num_resources = ARRAY_SIZE(pnx833x_sata_resources), - .resource = pnx833x_sata_resources, -}; - -static const char *part_probes[] = { - "cmdlinepart", - NULL -}; - -static void -pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; - - if (cmd == NAND_CMD_NONE) - return; - - if (ctrl & NAND_CLE) - writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_CLE_MASK)); - else - writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_ALE_MASK)); -} - -static struct platform_nand_data pnx833x_flash_nand_data = { - .chip = { - .chip_delay = 25, - .part_probe_types = part_probes, - }, - .ctrl = { - .cmd_ctrl = pnx833x_flash_nand_cmd_ctrl - } -}; - -/* - * Set start to be the correct address (PNX8335_NAND_BASE with no 0xb!!), - * 12 bytes more seems to be the standard that allows for NAND access. - */ -static struct resource pnx833x_flash_nand_resource = { - .start = PNX8335_NAND_BASE, - .end = PNX8335_NAND_BASE + 12, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pnx833x_flash_nand = { - .name = "gen_nand", - .id = -1, - .num_resources = 1, - .resource = &pnx833x_flash_nand_resource, - .dev = { - .platform_data = &pnx833x_flash_nand_data, - }, -}; - -static struct platform_device *pnx833x_platform_devices[] __initdata = { - &pnx833x_uart_device, - &pnx833x_usb_ehci_device, -#ifdef CONFIG_I2C_PNX0105 - &pnx833x_i2c0_device, - &pnx833x_i2c1_device, -#endif - &pnx833x_ethernet_device, - &pnx833x_sata_device, - &pnx833x_flash_nand, -}; - -static int __init pnx833x_platform_init(void) -{ - int res; - - res = platform_add_devices(pnx833x_platform_devices, - ARRAY_SIZE(pnx833x_platform_devices)); - - return res; -} - -arch_initcall(pnx833x_platform_init); |