diff options
Diffstat (limited to 'arch/mips/powertv/asic')
| -rw-r--r-- | arch/mips/powertv/asic/Makefile | 6 | ||||
| -rw-r--r-- | arch/mips/powertv/asic/asic-calliope.c | 2 | ||||
| -rw-r--r-- | arch/mips/powertv/asic/asic-cronus.c | 4 | ||||
| -rw-r--r-- | arch/mips/powertv/asic/asic-gaia.c | 96 | ||||
| -rw-r--r-- | arch/mips/powertv/asic/asic-zeus.c | 2 | ||||
| -rw-r--r-- | arch/mips/powertv/asic/asic_devices.c | 276 | ||||
| -rw-r--r-- | arch/mips/powertv/asic/prealloc-gaia.c | 589 |
7 files changed, 727 insertions, 248 deletions
diff --git a/arch/mips/powertv/asic/Makefile b/arch/mips/powertv/asic/Makefile index bebfdcff0443..f0e95dc0ac97 100644 --- a/arch/mips/powertv/asic/Makefile +++ b/arch/mips/powertv/asic/Makefile @@ -16,8 +16,8 @@ # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA # -obj-y += asic-calliope.o asic-cronus.o asic-zeus.o asic_devices.o asic_int.o \ - irq_asic.o prealloc-calliope.o prealloc-cronus.o \ - prealloc-cronuslite.o prealloc-zeus.o +obj-y += asic-calliope.o asic-cronus.o asic-gaia.o asic-zeus.o \ + asic_devices.o asic_int.o irq_asic.o prealloc-calliope.o \ + prealloc-cronus.o prealloc-cronuslite.o prealloc-gaia.o prealloc-zeus.o EXTRA_CFLAGS += -Wall -Werror diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c index 1ae6623444b2..0a170e0ffeaa 100644 --- a/arch/mips/powertv/asic/asic-calliope.c +++ b/arch/mips/powertv/asic/asic-calliope.c @@ -77,7 +77,7 @@ const struct register_map calliope_register_map __initdata = { .int_docsis_en = {.phys = CALLIOPE_ADDR(0xA028F4)}, .mips_pll_setup = {.phys = CALLIOPE_ADDR(0x980000)}, - .usb_fs = {.phys = CALLIOPE_ADDR(0x980030)}, + .fs432x4b4_usb_ctl = {.phys = CALLIOPE_ADDR(0x980030)}, .test_bus = {.phys = CALLIOPE_ADDR(0x9800CC)}, .crt_spare = {.phys = CALLIOPE_ADDR(0x9800d4)}, .usb2_ohci_int_mask = {.phys = CALLIOPE_ADDR(0x9A000c)}, diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c index 5bb64bfb508b..bbc0c122be5e 100644 --- a/arch/mips/powertv/asic/asic-cronus.c +++ b/arch/mips/powertv/asic/asic-cronus.c @@ -77,13 +77,13 @@ const struct register_map cronus_register_map __initdata = { .int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)}, .mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)}, - .usb_fs = {.phys = CRONUS_ADDR(0x1C0018)}, + .fs432x4b4_usb_ctl = {.phys = CRONUS_ADDR(0x1C0028)}, .test_bus = {.phys = CRONUS_ADDR(0x1C00CC)}, .crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)}, .usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)}, .usb2_strap = {.phys = CRONUS_ADDR(0x200014)}, .ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)}, - .ohci_hc_revision = {.phys = CRONUS_ADDR(0x1E0000)}, + .ohci_hc_revision = {.phys = CRONUS_ADDR(0x21fc00)}, .bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)}, .usb2_control = {.phys = CRONUS_ADDR(0x2E004C)}, .usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)}, diff --git a/arch/mips/powertv/asic/asic-gaia.c b/arch/mips/powertv/asic/asic-gaia.c new file mode 100644 index 000000000000..91dda682752c --- /dev/null +++ b/arch/mips/powertv/asic/asic-gaia.c @@ -0,0 +1,96 @@ +/* + * Locations of devices in the Gaia ASIC + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: David VomLehn + */ + +#include <linux/init.h> +#include <asm/mach-powertv/asic.h> + +const struct register_map gaia_register_map __initdata = { + .eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000}, + .eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038}, + .eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C}, + + .chipver3 = {.phys = GAIA_IO_BASE + 0x2A0800}, + .chipver2 = {.phys = GAIA_IO_BASE + 0x2A0804}, + .chipver1 = {.phys = GAIA_IO_BASE + 0x2A0808}, + .chipver0 = {.phys = GAIA_IO_BASE + 0x2A080C}, + + /* The registers of IRBlaster */ + .uart1_intstat = {.phys = GAIA_IO_BASE + 0x2A1800}, + .uart1_inten = {.phys = GAIA_IO_BASE + 0x2A1804}, + .uart1_config1 = {.phys = GAIA_IO_BASE + 0x2A1808}, + .uart1_config2 = {.phys = GAIA_IO_BASE + 0x2A180C}, + .uart1_divisorhi = {.phys = GAIA_IO_BASE + 0x2A1810}, + .uart1_divisorlo = {.phys = GAIA_IO_BASE + 0x2A1814}, + .uart1_data = {.phys = GAIA_IO_BASE + 0x2A1818}, + .uart1_status = {.phys = GAIA_IO_BASE + 0x2A181C}, + + .int_stat_3 = {.phys = GAIA_IO_BASE + 0x2A2800}, + .int_stat_2 = {.phys = GAIA_IO_BASE + 0x2A2804}, + .int_stat_1 = {.phys = GAIA_IO_BASE + 0x2A2808}, + .int_stat_0 = {.phys = GAIA_IO_BASE + 0x2A280C}, + .int_config = {.phys = GAIA_IO_BASE + 0x2A2810}, + .int_int_scan = {.phys = GAIA_IO_BASE + 0x2A2818}, + .ien_int_3 = {.phys = GAIA_IO_BASE + 0x2A2830}, + .ien_int_2 = {.phys = GAIA_IO_BASE + 0x2A2834}, + .ien_int_1 = {.phys = GAIA_IO_BASE + 0x2A2838}, + .ien_int_0 = {.phys = GAIA_IO_BASE + 0x2A283C}, + .int_level_3_3 = {.phys = GAIA_IO_BASE + 0x2A2880}, + .int_level_3_2 = {.phys = GAIA_IO_BASE + 0x2A2884}, + .int_level_3_1 = {.phys = GAIA_IO_BASE + 0x2A2888}, + .int_level_3_0 = {.phys = GAIA_IO_BASE + 0x2A288C}, + .int_level_2_3 = {.phys = GAIA_IO_BASE + 0x2A2890}, + .int_level_2_2 = {.phys = GAIA_IO_BASE + 0x2A2894}, + .int_level_2_1 = {.phys = GAIA_IO_BASE + 0x2A2898}, + .int_level_2_0 = {.phys = GAIA_IO_BASE + 0x2A289C}, + .int_level_1_3 = {.phys = GAIA_IO_BASE + 0x2A28A0}, + .int_level_1_2 = {.phys = GAIA_IO_BASE + 0x2A28A4}, + .int_level_1_1 = {.phys = GAIA_IO_BASE + 0x2A28A8}, + .int_level_1_0 = {.phys = GAIA_IO_BASE + 0x2A28AC}, + .int_level_0_3 = {.phys = GAIA_IO_BASE + 0x2A28B0}, + .int_level_0_2 = {.phys = GAIA_IO_BASE + 0x2A28B4}, + .int_level_0_1 = {.phys = GAIA_IO_BASE + 0x2A28B8}, + .int_level_0_0 = {.phys = GAIA_IO_BASE + 0x2A28BC}, + .int_docsis_en = {.phys = GAIA_IO_BASE + 0x2A28F4}, + + .mips_pll_setup = {.phys = GAIA_IO_BASE + 0x1C0000}, + .fs432x4b4_usb_ctl = {.phys = GAIA_IO_BASE + 0x1C0024}, + .test_bus = {.phys = GAIA_IO_BASE + 0x1C00CC}, + .crt_spare = {.phys = GAIA_IO_BASE + 0x1c0108}, + .usb2_ohci_int_mask = {.phys = GAIA_IO_BASE + 0x20000C}, + .usb2_strap = {.phys = GAIA_IO_BASE + 0x200014}, + .ehci_hcapbase = {.phys = GAIA_IO_BASE + 0x21FE00}, + .ohci_hc_revision = {.phys = GAIA_IO_BASE + 0x21fc00}, + .bcm1_bs_lmi_steer = {.phys = GAIA_IO_BASE + 0x2E0004}, + .usb2_control = {.phys = GAIA_IO_BASE + 0x2E004C}, + .usb2_stbus_obc = {.phys = GAIA_IO_BASE + 0x21FF00}, + .usb2_stbus_mess_size = {.phys = GAIA_IO_BASE + 0x21FF04}, + .usb2_stbus_chunk_size = {.phys = GAIA_IO_BASE + 0x21FF08}, + + .pcie_regs = {.phys = GAIA_IO_BASE + 0x220000}, + .tim_ch = {.phys = GAIA_IO_BASE + 0x2A2C10}, + .tim_cl = {.phys = GAIA_IO_BASE + 0x2A2C14}, + .gpio_dout = {.phys = GAIA_IO_BASE + 0x2A2C20}, + .gpio_din = {.phys = GAIA_IO_BASE + 0x2A2C24}, + .gpio_dir = {.phys = GAIA_IO_BASE + 0x2A2C2C}, + .watchdog = {.phys = GAIA_IO_BASE + 0x2A2C30}, + .front_panel = {.phys = GAIA_IO_BASE + 0x2A3800}, +}; diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c index 095cbe10ebb9..4a05bb096476 100644 --- a/arch/mips/powertv/asic/asic-zeus.c +++ b/arch/mips/powertv/asic/asic-zeus.c @@ -77,7 +77,7 @@ const struct register_map zeus_register_map __initdata = { .int_docsis_en = {.phys = ZEUS_ADDR(0x2828F4)}, .mips_pll_setup = {.phys = ZEUS_ADDR(0x1a0000)}, - .usb_fs = {.phys = ZEUS_ADDR(0x1a0018)}, + .fs432x4b4_usb_ctl = {.phys = ZEUS_ADDR(0x1a0018)}, .test_bus = {.phys = ZEUS_ADDR(0x1a0238)}, .crt_spare = {.phys = ZEUS_ADDR(0x1a0090)}, .usb2_ohci_int_mask = {.phys = ZEUS_ADDR(0x1e000c)}, diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c index 9ec523e4dd06..e56fa61b3991 100644 --- a/arch/mips/powertv/asic/asic_devices.c +++ b/arch/mips/powertv/asic/asic_devices.c @@ -1,7 +1,6 @@ /* - * ASIC Device List Intialization * - * Description: Defines the platform resources for the SA settop. + * Description: Defines the platform resources for Gaia-based settops. * * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. * @@ -19,11 +18,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> - * - * Description: Defines the platform resources for the SA settop. - * * NOTE: The bootloader allocates persistent memory at an address which is * 16 MiB below the end of the highest address in KSEG0. All fixed * address memory reservations must avoid this region. @@ -39,7 +33,6 @@ #include <linux/mm.h> #include <linux/platform_device.h> #include <linux/module.h> -#include <linux/gfp.h> #include <asm/page.h> #include <linux/swap.h> #include <linux/highmem.h> @@ -74,14 +67,13 @@ unsigned long asic_phy_base; unsigned long asic_base; EXPORT_SYMBOL(asic_base); /* Exported for testing */ struct resource *gp_resources; -static bool usb_configured; /* * Don't recommend to use it directly, it is usually used by kernel internally. * Portable code should be using interfaces such as ioremp, dma_map_single, etc. */ -unsigned long phys_to_bus_offset; -EXPORT_SYMBOL(phys_to_bus_offset); +unsigned long phys_to_dma_offset; +EXPORT_SYMBOL(phys_to_dma_offset); /* * @@ -97,101 +89,19 @@ struct resource asic_resource = { }; /* - * - * USB Host Resource Definition - * - */ - -static struct resource ehci_resources[] = { - { - .parent = &asic_resource, - .start = 0, - .end = 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = irq_usbehci, - .end = irq_usbehci, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ehci_dmamask = DMA_BIT_MASK(32); - -static struct platform_device ehci_device = { - .name = "powertv-ehci", - .id = 0, - .num_resources = 2, - .resource = ehci_resources, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource ohci_resources[] = { - { - .parent = &asic_resource, - .start = 0, - .end = 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = irq_usbohci, - .end = irq_usbohci, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ohci_dmamask = DMA_BIT_MASK(32); - -static struct platform_device ohci_device = { - .name = "powertv-ohci", - .id = 0, - .num_resources = 2, - .resource = ohci_resources, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct platform_device *platform_devices[] = { - &ehci_device, - &ohci_device, -}; - -/* - * - * Platform Configuration and Device Initialization - * - */ -static void __init fs_update(int pe, int md, int sdiv, int disable_div_by_3) -{ - int en_prg, byp, pwr, nsb, val; - int sout; - - sout = 1; - en_prg = 1; - byp = 0; - nsb = 1; - pwr = 1; - - val = ((sdiv << 29) | (md << 24) | (pe<<8) | (sout<<3) | (byp<<2) | - (nsb<<1) | (disable_div_by_3<<5)); - - asic_write(val, usb_fs); - asic_write(val | (en_prg<<4), usb_fs); - asic_write(val | (en_prg<<4) | pwr, usb_fs); -} - -/* * Allow override of bootloader-specified model + * Returns zero on success, a negative errno value on failure. This parameter + * allows overriding of the bootloader-specified model. */ static char __initdata cmdline[COMMAND_LINE_SIZE]; #define FORCEFAMILY_PARAM "forcefamily" +/* + * check_forcefamily - check for, and parse, forcefamily command line parameter + * @forced_family: Pointer to two-character array in which to store the + * value of the forcedfamily parameter, if any. + */ static __init int check_forcefamily(unsigned char forced_family[2]) { const char *p; @@ -231,14 +141,10 @@ static __init int check_forcefamily(unsigned char forced_family[2]) */ static __init noinline void platform_set_family(void) { -#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0)) - unsigned char forced_family[2]; unsigned short bootldr_family; - check_forcefamily(forced_family); - - if (forced_family[0] != '\0' && forced_family[1] != '\0') + if (check_forcefamily(forced_family) == 0) bootldr_family = BOOTLDRFAMILY(forced_family[0], forced_family[1]); else { @@ -289,6 +195,9 @@ static __init noinline void platform_set_family(void) case BOOTLDRFAMILY('F', '1'): platform_family = FAMILY_1500VZF; break; + case BOOTLDRFAMILY('8', '7'): + platform_family = FAMILY_8700; + break; default: platform_family = -1; } @@ -301,24 +210,9 @@ unsigned int platform_get_family(void) EXPORT_SYMBOL(platform_get_family); /* - * \brief usb_eye_configure() for optimizing the USB eye on Calliope. - * - * \param unsigned int value saved to the register. - * - * \return none - * - */ -static void __init usb_eye_configure(unsigned int value) -{ - asic_write(asic_read(crt_spare) | value, crt_spare); -} - -/* * platform_get_asic - determine the ASIC type. * - * \param none - * - * \return ASIC type; ASIC_UNKNOWN if none + * Returns the ASIC type, or ASIC_UNKNOWN if unknown * */ enum asic_type platform_get_asic(void) @@ -328,93 +222,10 @@ enum asic_type platform_get_asic(void) EXPORT_SYMBOL(platform_get_asic); /* - * platform_configure_usb - usb configuration based on platform type. - * @bcm1_usb2_ctl: value for the BCM1_USB2_CTL register, which is - * quirky - */ -static void __init platform_configure_usb(void) -{ - u32 bcm1_usb2_ctl; - - if (usb_configured) - return; - - switch (asic) { - case ASIC_ZEUS: - case ASIC_CRONUS: - case ASIC_CRONUSLITE: - fs_update(0x0000, 0x11, 0x02, 0); - bcm1_usb2_ctl = 0x803; - break; - - case ASIC_CALLIOPE: - fs_update(0x0000, 0x11, 0x02, 1); - - switch (platform_family) { - case FAMILY_1500VZE: - break; - - case FAMILY_1500VZF: - usb_eye_configure(0x003c0000); - break; - - default: - usb_eye_configure(0x00300000); - break; - } - - bcm1_usb2_ctl = 0x803; - break; - - default: - pr_err("Unknown ASIC type: %d\n", asic); - break; - } - - /* turn on USB power */ - asic_write(0, usb2_strap); - /* Enable all OHCI interrupts */ - asic_write(bcm1_usb2_ctl, usb2_control); - /* USB2_STBUS_OBC store32/load32 */ - asic_write(3, usb2_stbus_obc); - /* USB2_STBUS_MESS_SIZE 2 packets */ - asic_write(1, usb2_stbus_mess_size); - /* USB2_STBUS_CHUNK_SIZE 2 packets */ - asic_write(1, usb2_stbus_chunk_size); - - usb_configured = true; -} - -/* - * Set up the USB EHCI interface + * set_register_map - set ASIC register configuration + * @phys_base: Physical address of the base of the ASIC registers + * @map: Description of key ASIC registers */ -void platform_configure_usb_ehci() -{ - platform_configure_usb(); -} - -/* - * Set up the USB OHCI interface - */ -void platform_configure_usb_ohci() -{ - platform_configure_usb(); -} - -/* - * Shut the USB EHCI interface down--currently a NOP - */ -void platform_unconfigure_usb_ehci() -{ -} - -/* - * Shut the USB OHCI interface down--currently a NOP - */ -void platform_unconfigure_usb_ohci() -{ -} - static void __init set_register_map(unsigned long phys_base, const struct register_map *map) { @@ -526,6 +337,15 @@ void __init configure_platform(void) "DVR_CAPABLE\n"); break; + case FAMILY_8700: + platform_features = FFS_CAPABLE | PCIE_CAPABLE; + asic = ASIC_GAIA; + set_register_map(GAIA_IO_BASE, &gaia_register_map); + gp_resources = dvr_gaia_resources; + + pr_info("Platform: 8700 - GAIA, DVR_CAPABLE\n"); + break; + default: pr_crit("Platform: UNKNOWN PLATFORM\n"); break; @@ -533,10 +353,10 @@ void __init configure_platform(void) switch (asic) { case ASIC_ZEUS: - phys_to_bus_offset = 0x30000000; + phys_to_dma_offset = 0x30000000; break; case ASIC_CALLIOPE: - phys_to_bus_offset = 0x10000000; + phys_to_dma_offset = 0x10000000; break; case ASIC_CRONUSLITE: /* Fall through */ @@ -546,42 +366,16 @@ void __init configure_platform(void) * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000- * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000. */ - phys_to_bus_offset = 0x10000000; + phys_to_dma_offset = 0x10000000; break; default: - phys_to_bus_offset = 0x00000000; + phys_to_dma_offset = 0x00000000; break; } } -/** - * platform_devices_init - sets up USB device resourse. - */ -static int __init platform_devices_init(void) -{ - pr_notice("%s: ----- Initializing USB resources -----\n", __func__); - - asic_resource.start = asic_phy_base; - asic_resource.end += asic_resource.start; - - ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase); - ehci_resources[0].end += ehci_resources[0].start; - - ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision); - ohci_resources[0].end += ohci_resources[0].start; - - set_io_port_base(0); - - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - - return 0; -} - -arch_initcall(platform_devices_init); - /* - * - * BOOTMEM ALLOCATION + * RESOURCE ALLOCATION * */ /* @@ -603,7 +397,7 @@ void __init platform_alloc_bootmem(void) int size = gp_resources[i].end - gp_resources[i].start + 1; if ((gp_resources[i].start != 0) && ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) { - reserve_bootmem(bus_to_phys(gp_resources[i].start), + reserve_bootmem(dma_to_phys(gp_resources[i].start), size, 0); total += gp_resources[i].end - gp_resources[i].start + 1; @@ -627,7 +421,7 @@ void __init platform_alloc_bootmem(void) else { gp_resources[i].start = - phys_to_bus(virt_to_phys(mem)); + phys_to_dma(virt_to_phys(mem)); gp_resources[i].end = gp_resources[i].start + size - 1; total += size; @@ -691,7 +485,7 @@ static void __init pmem_setup_resource(void) if (resource && pmemaddr && pmemlen) { /* The address provided by bootloader is in kseg0. Convert to * a bus address. */ - resource->start = phys_to_bus(pmemaddr - 0x80000000); + resource->start = phys_to_dma(pmemaddr - 0x80000000); resource->end = resource->start + pmemlen - 1; pr_info("persistent memory: start=0x%x end=0x%x\n", diff --git a/arch/mips/powertv/asic/prealloc-gaia.c b/arch/mips/powertv/asic/prealloc-gaia.c new file mode 100644 index 000000000000..8ac8c7aeb986 --- /dev/null +++ b/arch/mips/powertv/asic/prealloc-gaia.c @@ -0,0 +1,589 @@ +/* + * Memory pre-allocations for Gaia boxes. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: David VomLehn + */ + +#include <linux/init.h> +#include <asm/mach-powertv/asic.h> + +/* + * DVR_CAPABLE GAIA RESOURCES + */ +struct resource dvr_gaia_resources[] __initdata = { + /* + * + * VIDEO1 / LX1 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x241FFFFF, /* 2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24201FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_MEM, + }, + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231bImage", /* Delta-Mu 2 image and ram */ + .start = 0x60000000, + .end = 0x601FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ + .start = 0x60200000, + .end = 0x60201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory2", + .start = 0x60202000, + .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x63580000, + .end = 0x64180000 - 1, /* 12 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x62000000, + .end = 0x62700000 - 1, /* 7 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x62700000, + .end = 0x63500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x26000000, + .end = 0x26020000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x00280000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x64AD4000, + .end = 0x64AD5000 - 1, /* 4 KB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * ITFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "ITFS", + .start = 0x64180000, + /* 815,104 bytes each for 2 ITFS partitions. */ + .end = 0x6430DFFF, + .flags = IORESOURCE_IO, + }, + /* + * + * AVFS + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "AvfsDmaMem", + .start = 0x6430E000, + /* (945K * 8) = (128K *3) 5 playbacks / 3 server */ + .end = 0x64AD0000 - 1, + .flags = IORESOURCE_IO, + }, + { + .name = "AvfsFileSys", + .start = 0x64AD0000, + .end = 0x64AD1000 - 1, /* 4K */ + .flags = IORESOURCE_IO, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x64AD1000, + .end = 0x64AD3800 - 1, + .flags = IORESOURCE_IO, + }, + /* + * + * KAVNET + * NP Reset Vector - must be of the form xxCxxxxx + * NP Image - must be video bank 1 + * NP IPC - must be video bank 2 + */ + { + .name = "NP_Reset_Vector", + .start = 0x27c00000, + .end = 0x27c01000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_Image", + .start = 0x27020000, + .end = 0x27060000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_IPC", + .start = 0x63500000, + .end = 0x63580000 - 1, + .flags = IORESOURCE_IO, + }, + /* + * Add other resources here + */ + { }, +}; + +/* + * NON_DVR_CAPABLE GAIA RESOURCES + */ +struct resource non_dvr_gaia_resources[] __initdata = { + /* + * + * VIDEO1 / LX1 + * + */ + { + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x241FFFFF, /* 2MiB */ + .flags = IORESOURCE_MEM, + }, + { + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24201FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "MediaMemory1", + .start = 0x24202000, + .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_MEM, + }, + /* + * + * VIDEO2 / LX2 + * + */ + { + .name = "ST231bImage", /* Delta-Mu 2 image and ram */ + .start = 0x60000000, + .end = 0x601FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, + }, + { + .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ + .start = 0x60200000, + .end = 0x60201FFF, + .flags = IORESOURCE_IO, + }, + { + .name = "MediaMemory2", + .start = 0x60202000, + .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, + }, + /* + * + * Sysaudio Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * DSP_Image_Buff - DSP code and data images (1MB) + * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) + * ADSC_AUX_Buff - ADSC AUX buffer (16KB) + * ADSC_Main_Buff - ADSC Main buffer (16KB) + * + */ + { + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, + }, + /* + * + * STAVEM driver/STAPI + * + * This driver requires: + * + * Arbitrary Based Buffers: + * This memory area is used for allocating buffers for Video decoding + * purposes. Allocation/De-allocation within this buffer is managed + * by the STAVMEM driver of the STAPI. They could be Decimated + * Picture Buffers, Intermediate Buffers, as deemed necessary for + * video decoding purposes, for any video decoders on Zeus. + * + */ + { + .name = "AVMEMPartition0", + .start = 0x63580000, + .end = 0x64180000 - 1, /* 12 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * DOCSIS Subsystem + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "Docsis", + .start = 0x62000000, + .end = 0x62700000 - 1, /* 7 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * GHW HAL Driver + * + * This driver requires: + * + * Arbitrary Based Buffers: + * GraphicsHeap - PowerTV Graphics Heap + * + */ + { + .name = "GraphicsHeap", + .start = 0x62700000, + .end = 0x63500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * multi com buffer area + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "MulticomSHM", + .start = 0x26000000, + .end = 0x26020000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * DMA Ring buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Docsis - + * + */ + { + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer for unit0 + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit0 + * + */ + { + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, + }, + /* + * + * Display bins buffer + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Display Bins for unit1 + * + */ + { + .name = "DisplayBins1", + .start = 0x64AD4000, + .end = 0x64AD5000 - 1, /* 4 KB total */ + .flags = IORESOURCE_IO, + }, + /* + * + * AVFS: player HAL memory + * + * + */ + { + .name = "AvfsDmaMem", + .start = 0x6430E000, + .end = 0x645D2C00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_IO, + }, + /* + * + * PMEM + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Persistent memory for diagnostics. + * + */ + { + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * + * Smartcard + * + * This driver requires: + * + * Arbitrary Based Buffers: + * Read and write buffers for Internal/External cards + * + */ + { + .name = "SmartCardInfo", + .start = 0x64AD1000, + .end = 0x64AD3800 - 1, + .flags = IORESOURCE_IO, + }, + /* + * + * KAVNET + * NP Reset Vector - must be of the form xxCxxxxx + * NP Image - must be video bank 1 + * NP IPC - must be video bank 2 + */ + { + .name = "NP_Reset_Vector", + .start = 0x27c00000, + .end = 0x27c01000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_Image", + .start = 0x27020000, + .end = 0x27060000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "NP_IPC", + .start = 0x63500000, + .end = 0x63580000 - 1, + .flags = IORESOURCE_IO, + }, + { }, +}; |