diff options
Diffstat (limited to 'arch/mips/txx9/generic/pci.c')
| -rw-r--r-- | arch/mips/txx9/generic/pci.c | 28 |
1 files changed, 13 insertions, 15 deletions
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c index 285d84e5c7b9..0bd2a1e1ff9a 100644 --- a/arch/mips/txx9/generic/pci.c +++ b/arch/mips/txx9/generic/pci.c @@ -55,7 +55,7 @@ int __init txx9_pci66_check(struct pci_controller *hose, int top_bus, /* It seems SLC90E66 needs some time after PCI reset... */ mdelay(80); - printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n"); + pr_info("PCI: Checking 66MHz capabilities...\n"); for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { if (PCI_FUNC(pci_devfn)) @@ -74,9 +74,8 @@ int __init txx9_pci66_check(struct pci_controller *hose, int top_bus, early_read_config_word(hose, top_bus, current_bus, pci_devfn, PCI_STATUS, &stat); if (!(stat & PCI_STATUS_66MHZ)) { - printk(KERN_DEBUG - "PCI: %02x:%02x not 66MHz capable.\n", - current_bus, pci_devfn); + pr_debug("PCI: %02x:%02x not 66MHz capable.\n", + current_bus, pci_devfn); cap66 = 0; break; } @@ -209,8 +208,8 @@ txx9_alloc_pci_controller(struct pci_controller *pcic, pcic->mem_offset = 0; /* busaddr == physaddr */ - printk(KERN_INFO "PCI: IO %pR MEM %pR\n", - &pcic->mem_resource[1], &pcic->mem_resource[0]); + pr_info("PCI: IO %pR MEM %pR\n", &pcic->mem_resource[1], + &pcic->mem_resource[0]); /* register_pci_controller() will request MEM resource */ release_resource(&pcic->mem_resource[0]); @@ -219,7 +218,7 @@ txx9_alloc_pci_controller(struct pci_controller *pcic, release_resource(&pcic->mem_resource[0]); free_and_exit: kfree(new); - printk(KERN_ERR "PCI: Failed to allocate resources.\n"); + pr_err("PCI: Failed to allocate resources.\n"); return NULL; } @@ -260,7 +259,7 @@ static int txx9_i8259_irq_setup(int irq) err = request_irq(irq, &i8259_interrupt, IRQF_SHARED, "cascade(i8259)", (void *)(long)irq); if (!err) - printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq); + pr_info("PCI-ISA bridge PIC (irq %d)\n", irq); return err; } @@ -308,13 +307,13 @@ static void quirk_slc90e66_ide(struct pci_dev *dev) /* SMSC SLC90E66 IDE uses irq 14, 15 (default) */ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14); pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat); - printk(KERN_INFO "PCI: %s: IRQ %02x", pci_name(dev), dat); + pr_info("PCI: %s: IRQ %02x", pci_name(dev), dat); /* enable SMSC SLC90E66 IDE */ for (i = 0; i < ARRAY_SIZE(regs); i++) { pci_read_config_byte(dev, regs[i], &dat); pci_write_config_byte(dev, regs[i], dat | 0x80); pci_read_config_byte(dev, regs[i], &dat); - printk(KERN_CONT " IDETIM%d %02x", i, dat); + pr_cont(" IDETIM%d %02x", i, dat); } pci_read_config_byte(dev, 0x5c, &dat); /* @@ -329,8 +328,7 @@ static void quirk_slc90e66_ide(struct pci_dev *dev) dat |= 0x01; pci_write_config_byte(dev, 0x5c, dat); pci_read_config_byte(dev, 0x5c, &dat); - printk(KERN_CONT " REG5C %02x", dat); - printk(KERN_CONT "\n"); + pr_cont(" REG5C %02x\n", dat); } #endif /* CONFIG_TOSHIBA_FPCIB0 */ @@ -352,7 +350,7 @@ static void final_fixup(struct pci_dev *dev) (bist & PCI_BIST_CAPABLE)) { unsigned long timeout; pci_set_power_state(dev, PCI_D0); - printk(KERN_INFO "PCI: %s BIST...", pci_name(dev)); + pr_info("PCI: %s BIST...", pci_name(dev)); pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START); timeout = jiffies + HZ * 2; /* timeout after 2 sec */ do { @@ -361,9 +359,9 @@ static void final_fixup(struct pci_dev *dev) break; } while (bist & PCI_BIST_START); if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START)) - printk(KERN_CONT "failed. (0x%x)\n", bist); + pr_cont("failed. (0x%x)\n", bist); else - printk(KERN_CONT "OK.\n"); + pr_cont("OK.\n"); } } |