aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mips/txx9/jmr3927/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/txx9/jmr3927/setup.c')
-rw-r--r--arch/mips/txx9/jmr3927/setup.c367
1 files changed, 367 insertions, 0 deletions
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
new file mode 100644
index 000000000000..03647ebe4130
--- /dev/null
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -0,0 +1,367 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ahennessy@mvista.com
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/serial_core.h>
+#endif
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/reboot.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/jmr3927.h>
+#include <asm/mipsregs.h>
+
+extern void puts(const char *cp);
+
+/* don't enable - see errata */
+static int jmr3927_ccfg_toeon;
+
+static inline void do_reset(void)
+{
+#if 1 /* Resetting PCI bus */
+ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+ jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
+ (void)jmr3927_ioc_reg_in(JMR3927_IOC_RESET_ADDR); /* flush WB */
+ mdelay(1);
+ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+#endif
+ jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
+}
+
+static void jmr3927_machine_restart(char *command)
+{
+ local_irq_disable();
+ puts("Rebooting...");
+ do_reset();
+}
+
+static void jmr3927_machine_halt(void)
+{
+ puts("JMR-TX3927 halted.\n");
+ while (1);
+}
+
+static void jmr3927_machine_power_off(void)
+{
+ puts("JMR-TX3927 halted. Please turn off the power.\n");
+ while (1);
+}
+
+static void __init jmr3927_time_init(void)
+{
+ txx9_clockevent_init(TX3927_TMR_REG(0),
+ TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
+ JMR3927_IMCLK);
+ txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
+}
+
+#define DO_WRITE_THROUGH
+#define DO_ENABLE_CACHE
+
+static void jmr3927_board_init(void);
+
+static void __init jmr3927_mem_setup(void)
+{
+ char *argptr;
+
+ set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
+
+ _machine_restart = jmr3927_machine_restart;
+ _machine_halt = jmr3927_machine_halt;
+ pm_power_off = jmr3927_machine_power_off;
+
+ /* Reboot on panic */
+ panic_timeout = 180;
+
+ /* cache setup */
+ {
+ unsigned int conf;
+#ifdef DO_ENABLE_CACHE
+ int mips_ic_disable = 0, mips_dc_disable = 0;
+#else
+ int mips_ic_disable = 1, mips_dc_disable = 1;
+#endif
+#ifdef DO_WRITE_THROUGH
+ int mips_config_cwfon = 0;
+ int mips_config_wbon = 0;
+#else
+ int mips_config_cwfon = 1;
+ int mips_config_wbon = 1;
+#endif
+
+ conf = read_c0_conf();
+ conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
+ conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
+ conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
+ conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
+ conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0;
+
+ write_c0_conf(conf);
+ write_c0_cache(0);
+ }
+
+ /* initialize board */
+ jmr3927_board_init();
+
+ argptr = prom_getcmdline();
+
+ if ((argptr = strstr(argptr, "toeon")) != NULL)
+ jmr3927_ccfg_toeon = 1;
+ argptr = prom_getcmdline();
+ if ((argptr = strstr(argptr, "ip=")) == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " ip=bootp");
+ }
+
+#ifdef CONFIG_SERIAL_TXX9
+ {
+ extern int early_serial_txx9_setup(struct uart_port *port);
+ int i;
+ struct uart_port req;
+ for(i = 0; i < 2; i++) {
+ memset(&req, 0, sizeof(req));
+ req.line = i;
+ req.iotype = UPIO_MEM;
+ req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
+ req.mapbase = TX3927_SIO_REG(i);
+ req.irq = i == 0 ?
+ JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
+ if (i == 0)
+ req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+ req.uartclk = JMR3927_IMCLK;
+ early_serial_txx9_setup(&req);
+ }
+ }
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+ argptr = prom_getcmdline();
+ if ((argptr = strstr(argptr, "console=")) == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS1,115200");
+ }
+#endif
+#endif
+}
+
+static void tx3927_setup(void);
+
+static void __init jmr3927_pci_setup(void)
+{
+#ifdef CONFIG_PCI
+ int extarb = !(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB);
+ struct pci_controller *c;
+
+ c = txx9_alloc_pci_controller(&txx9_primary_pcic,
+ JMR3927_PCIMEM, JMR3927_PCIMEM_SIZE,
+ JMR3927_PCIIO, JMR3927_PCIIO_SIZE);
+ register_pci_controller(c);
+ if (!extarb) {
+ /* Reset PCI Bus */
+ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+ udelay(100);
+ jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI,
+ JMR3927_IOC_RESET_ADDR);
+ udelay(100);
+ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+ }
+ tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+#endif /* CONFIG_PCI */
+}
+
+static void __init jmr3927_board_init(void)
+{
+ tx3927_setup();
+ jmr3927_pci_setup();
+
+ /* SIO0 DTR on */
+ jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
+
+ jmr3927_led_set(0);
+
+ printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
+ jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
+ jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
+ jmr3927_dipsw1(), jmr3927_dipsw2(),
+ jmr3927_dipsw3(), jmr3927_dipsw4());
+}
+
+static void __init tx3927_setup(void)
+{
+ int i;
+
+ txx9_cpu_clock = JMR3927_CORECLK;
+ txx9_gbus_clock = JMR3927_GBUSCLK;
+ /* SDRAMC are configured by PROM */
+
+ /* ROMC */
+ tx3927_romcptr->cr[1] = JMR3927_ROMCE1 | 0x00030048;
+ tx3927_romcptr->cr[2] = JMR3927_ROMCE2 | 0x000064c8;
+ tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
+ tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
+
+ /* CCFG */
+ /* enable Timeout BusError */
+ if (jmr3927_ccfg_toeon)
+ tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
+
+ /* clear BusErrorOnWrite flag */
+ tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
+ /* Disable PCI snoop */
+ tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
+ /* do reset on watchdog */
+ tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
+
+#ifdef DO_WRITE_THROUGH
+ /* Enable PCI SNOOP - with write through only */
+ tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
+#endif
+
+ /* Pin selection */
+ tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
+ tx3927_ccfgptr->pcfg |=
+ TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
+ (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
+
+ printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
+ tx3927_ccfgptr->crir,
+ tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
+
+ /* TMR */
+ for (i = 0; i < TX3927_NR_TMR; i++)
+ txx9_tmr_init(TX3927_TMR_REG(i));
+
+ /* DMA */
+ tx3927_dmaptr->mcr = 0;
+ for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
+ /* reset channel */
+ tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
+ tx3927_dmaptr->ch[i].ccr = 0;
+ }
+ /* enable DMA */
+#ifdef __BIG_ENDIAN
+ tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
+#else
+ tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
+#endif
+
+ /* PIO */
+ /* PIO[15:12] connected to LEDs */
+ __raw_writel(0x0000f000, &tx3927_pioptr->dir);
+ __raw_writel(0, &tx3927_pioptr->maskcpu);
+ __raw_writel(0, &tx3927_pioptr->maskext);
+ txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+ gpio_request(11, "dipsw1");
+ gpio_request(10, "dipsw2");
+ {
+ unsigned int conf;
+
+ conf = read_c0_conf();
+ if (!(conf & TX39_CONF_ICE))
+ printk("TX3927 I-Cache disabled.\n");
+ if (!(conf & TX39_CONF_DCE))
+ printk("TX3927 D-Cache disabled.\n");
+ else if (!(conf & TX39_CONF_WBON))
+ printk("TX3927 D-Cache WriteThrough.\n");
+ else if (!(conf & TX39_CONF_CWFON))
+ printk("TX3927 D-Cache WriteBack.\n");
+ else
+ printk("TX3927 D-Cache WriteBack (CWF) .\n");
+ }
+}
+
+/* This trick makes rtc-ds1742 driver usable as is. */
+static unsigned long jmr3927_swizzle_addr_b(unsigned long port)
+{
+ if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR)
+ return port;
+ port = (port & 0xffff0000) | (port & 0x7fff << 1);
+#ifdef __BIG_ENDIAN
+ return port;
+#else
+ return port | 1;
+#endif
+}
+
+static int __init jmr3927_rtc_init(void)
+{
+ static struct resource __initdata res = {
+ .start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
+ .end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ };
+ struct platform_device *dev;
+ dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
+ return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+/* Watchdog support */
+
+static int __init txx9_wdt_init(unsigned long base)
+{
+ struct resource res = {
+ .start = base,
+ .end = base + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ };
+ struct platform_device *dev =
+ platform_device_register_simple("txx9wdt", -1, &res, 1);
+ return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+static int __init jmr3927_wdt_init(void)
+{
+ return txx9_wdt_init(TX3927_TMR_REG(2));
+}
+
+static void __init jmr3927_device_init(void)
+{
+ __swizzle_addr_b = jmr3927_swizzle_addr_b;
+ jmr3927_rtc_init();
+ jmr3927_wdt_init();
+}
+
+struct txx9_board_vec jmr3927_vec __initdata = {
+ .system = "Toshiba JMR_TX3927",
+ .prom_init = jmr3927_prom_init,
+ .mem_setup = jmr3927_mem_setup,
+ .irq_setup = jmr3927_irq_setup,
+ .time_init = jmr3927_time_init,
+ .device_init = jmr3927_device_init,
+#ifdef CONFIG_PCI
+ .pci_map_irq = jmr3927_pci_map_irq,
+#endif
+};
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.