diff options
Diffstat (limited to 'arch/mn10300/include/asm')
| -rw-r--r-- | arch/mn10300/include/asm/highmem.h | 44 | ||||
| -rw-r--r-- | arch/mn10300/include/asm/ioctls.h | 84 | ||||
| -rw-r--r-- | arch/mn10300/include/asm/irqflags.h | 123 | ||||
| -rw-r--r-- | arch/mn10300/include/asm/pgtable.h | 2 | ||||
| -rw-r--r-- | arch/mn10300/include/asm/system.h | 109 |
5 files changed, 153 insertions, 209 deletions
diff --git a/arch/mn10300/include/asm/highmem.h b/arch/mn10300/include/asm/highmem.h index b0b187a29b88..e2155e686451 100644 --- a/arch/mn10300/include/asm/highmem.h +++ b/arch/mn10300/include/asm/highmem.h @@ -70,15 +70,16 @@ static inline void kunmap(struct page *page) * be used in IRQ contexts, so in some (very limited) cases we need * it. */ -static inline unsigned long kmap_atomic(struct page *page, enum km_type type) +static inline unsigned long __kmap_atomic(struct page *page) { - enum fixed_addresses idx; unsigned long vaddr; + int idx, type; + pagefault_disable(); if (page < highmem_start_page) return page_address(page); - debug_kmap_atomic(type); + type = kmap_atomic_idx_push(); idx = type + KM_TYPE_NR * smp_processor_id(); vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); #if HIGHMEM_DEBUG @@ -91,26 +92,37 @@ static inline unsigned long kmap_atomic(struct page *page, enum km_type type) return vaddr; } -static inline void kunmap_atomic_notypecheck(unsigned long vaddr, enum km_type type) +static inline void __kunmap_atomic(unsigned long vaddr) { -#if HIGHMEM_DEBUG - enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id(); + int type; - if (vaddr < FIXADDR_START) /* FIXME */ + if (vaddr < FIXADDR_START) { /* FIXME */ + pagefault_enable(); return; + } - if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)) - BUG(); + type = kmap_atomic_idx(); - /* - * force other mappings to Oops if they'll try to access - * this pte without first remap it - */ - pte_clear(kmap_pte - idx); - __flush_tlb_one(vaddr); +#if HIGHMEM_DEBUG + { + unsigned int idx; + idx = type + KM_TYPE_NR * smp_processor_id(); + + if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)) + BUG(); + + /* + * force other mappings to Oops if they'll try to access + * this pte without first remap it + */ + pte_clear(kmap_pte - idx); + __flush_tlb_one(vaddr); + } #endif -} + kmap_atomic_idx_pop(); + pagefault_enable(); +} #endif /* __KERNEL__ */ #endif /* _ASM_HIGHMEM_H */ diff --git a/arch/mn10300/include/asm/ioctls.h b/arch/mn10300/include/asm/ioctls.h index cb8cf1902234..0212f4b22557 100644 --- a/arch/mn10300/include/asm/ioctls.h +++ b/arch/mn10300/include/asm/ioctls.h @@ -1,88 +1,6 @@ #ifndef _ASM_IOCTLS_H #define _ASM_IOCTLS_H -#include <asm/ioctl.h> - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T', 0x2A, struct termios2) -#define TCSETS2 _IOW('T', 0x2B, struct termios2) -#define TCSETSW2 _IOW('T', 0x2C, struct termios2) -#define TCSETSF2 _IOW('T', 0x2D, struct termios2) -#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number - * (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ -#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */ - -#define FIONCLEX 0x5450 -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define FIOQSIZE 0x5460 - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 -#define TIOCPKT_IOCTL 64 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ +#include <asm-generic/ioctls.h> #endif /* _ASM_IOCTLS_H */ diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h new file mode 100644 index 000000000000..5e529a117cb2 --- /dev/null +++ b/arch/mn10300/include/asm/irqflags.h @@ -0,0 +1,123 @@ +/* MN10300 IRQ flag handling + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_IRQFLAGS_H +#define _ASM_IRQFLAGS_H + +#include <asm/cpu-regs.h> + +/* + * interrupt control + * - "disabled": run in IM1/2 + * - level 0 - GDB stub + * - level 1 - virtual serial DMA (if present) + * - level 5 - normal interrupt priority + * - level 6 - timer interrupt + * - "enabled": run in IM7 + */ +#ifdef CONFIG_MN10300_TTYSM +#define MN10300_CLI_LEVEL EPSW_IM_2 +#else +#define MN10300_CLI_LEVEL EPSW_IM_1 +#endif + +#ifndef __ASSEMBLY__ + +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + + asm volatile("mov epsw,%0" : "=d"(flags)); + return flags; +} + +static inline void arch_local_irq_disable(void) +{ + asm volatile( + " and %0,epsw \n" + " or %1,epsw \n" + " nop \n" + " nop \n" + " nop \n" + : + : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) + : "memory"); +} + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags; + + flags = arch_local_save_flags(); + arch_local_irq_disable(); + return flags; +} + +/* + * we make sure arch_irq_enable() doesn't cause priority inversion + */ +extern unsigned long __mn10300_irq_enabled_epsw; + +static inline void arch_local_irq_enable(void) +{ + unsigned long tmp; + + asm volatile( + " mov epsw,%0 \n" + " and %1,%0 \n" + " or %2,%0 \n" + " mov %0,epsw \n" + : "=&d"(tmp) + : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) + : "memory"); +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ + asm volatile( + " mov %0,epsw \n" + " nop \n" + " nop \n" + " nop \n" + : + : "d"(flags) + : "memory", "cc"); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return (flags & EPSW_IM) <= MN10300_CLI_LEVEL; +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +/* + * Hook to save power by halting the CPU + * - called from the idle loop + * - must reenable interrupts (which takes three instruction cycles to complete) + */ +static inline void arch_safe_halt(void) +{ + asm volatile( + " or %0,epsw \n" + " nop \n" + " nop \n" + " bset %2,(%1) \n" + : + : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP) + : "cc"); +} + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_IRQFLAGS_H */ diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h index 16d88577f3e0..b049a8bd1577 100644 --- a/arch/mn10300/include/asm/pgtable.h +++ b/arch/mn10300/include/asm/pgtable.h @@ -457,9 +457,7 @@ static inline int set_kernel_exec(unsigned long vaddr, int enable) #define pte_offset_map(dir, address) \ ((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address)) -#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address) #define pte_unmap(pte) do {} while (0) -#define pte_unmap_nested(pte) do {} while (0) /* * The MN10300 has external MMU info in the form of a TLB: this is adapted from diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h index 3636c054dcd5..9f7c7e17c01e 100644 --- a/arch/mn10300/include/asm/system.h +++ b/arch/mn10300/include/asm/system.h @@ -17,6 +17,7 @@ #ifndef __ASSEMBLY__ #include <linux/kernel.h> +#include <linux/irqflags.h> struct task_struct; struct thread_struct; @@ -81,114 +82,6 @@ do { \ /*****************************************************************************/ /* - * interrupt control - * - "disabled": run in IM1/2 - * - level 0 - GDB stub - * - level 1 - virtual serial DMA (if present) - * - level 5 - normal interrupt priority - * - level 6 - timer interrupt - * - "enabled": run in IM7 - */ -#ifdef CONFIG_MN10300_TTYSM -#define MN10300_CLI_LEVEL EPSW_IM_2 -#else -#define MN10300_CLI_LEVEL EPSW_IM_1 -#endif - -#define local_save_flags(x) \ -do { \ - typecheck(unsigned long, x); \ - asm volatile( \ - " mov epsw,%0 \n" \ - : "=d"(x) \ - ); \ -} while (0) - -#define local_irq_disable() \ -do { \ - asm volatile( \ - " and %0,epsw \n" \ - " or %1,epsw \n" \ - " nop \n" \ - " nop \n" \ - " nop \n" \ - : \ - : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) \ - ); \ -} while (0) - -#define local_irq_save(x) \ -do { \ - local_save_flags(x); \ - local_irq_disable(); \ -} while (0) - -/* - * we make sure local_irq_enable() doesn't cause priority inversion - */ -#ifndef __ASSEMBLY__ - -extern unsigned long __mn10300_irq_enabled_epsw; - -#endif - -#define local_irq_enable() \ -do { \ - unsigned long tmp; \ - \ - asm volatile( \ - " mov epsw,%0 \n" \ - " and %1,%0 \n" \ - " or %2,%0 \n" \ - " mov %0,epsw \n" \ - : "=&d"(tmp) \ - : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \ - : "cc" \ - ); \ -} while (0) - -#define local_irq_restore(x) \ -do { \ - typecheck(unsigned long, x); \ - asm volatile( \ - " mov %0,epsw \n" \ - " nop \n" \ - " nop \n" \ - " nop \n" \ - : \ - : "d"(x) \ - : "memory", "cc" \ - ); \ -} while (0) - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \ -}) - -/* hook to save power by halting the CPU - * - called from the idle loop - * - must reenable interrupts (which takes three instruction cycles to complete) - */ -#define safe_halt() \ -do { \ - asm volatile(" or %0,epsw \n" \ - " nop \n" \ - " nop \n" \ - " bset %2,(%1) \n" \ - : \ - : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\ - : "cc" \ - ); \ -} while (0) - -#define STI or EPSW_IE|EPSW_IM,epsw -#define CLI and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop - -/*****************************************************************************/ -/* * MN10300 doesn't actually have an exchange instruction */ #ifndef __ASSEMBLY__ |