diff options
Diffstat (limited to 'arch/mn10300/unit-asb2364/unit-init.c')
| -rw-r--r-- | arch/mn10300/unit-asb2364/unit-init.c | 132 |
1 files changed, 0 insertions, 132 deletions
diff --git a/arch/mn10300/unit-asb2364/unit-init.c b/arch/mn10300/unit-asb2364/unit-init.c deleted file mode 100644 index 6359b41ce7e9..000000000000 --- a/arch/mn10300/unit-asb2364/unit-init.c +++ /dev/null @@ -1,132 +0,0 @@ -/* ASB2364 initialisation - * - * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/delay.h> - -#include <asm/io.h> -#include <asm/setup.h> -#include <asm/processor.h> -#include <asm/irq.h> -#include <asm/intctl-regs.h> -#include <asm/serial-regs.h> -#include <unit/fpga-regs.h> -#include <unit/serial.h> -#include <unit/smsc911x.h> - -#define TTYS0_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 2, u8) -#define LAN_IRQ_CFG __SYSREG(SMSC911X_BASE + 0x54, u32) -#define LAN_INT_EN __SYSREG(SMSC911X_BASE + 0x5c, u32) - -/* - * initialise some of the unit hardware before gdbstub is set up - */ -asmlinkage void __init unit_init(void) -{ - /* Make sure we aren't going to get unexpected interrupts */ - TTYS0_SERIAL_IER = 0; - SC0RXICR = 0; - SC0TXICR = 0; - SC1RXICR = 0; - SC1TXICR = 0; - SC2RXICR = 0; - SC2TXICR = 0; - - /* Attempt to reset the FPGA attached peripherals */ - ASB2364_FPGA_REG_RESET_LAN = 0x0000; - SyncExBus(); - ASB2364_FPGA_REG_RESET_UART = 0x0000; - SyncExBus(); - ASB2364_FPGA_REG_RESET_I2C = 0x0000; - SyncExBus(); - ASB2364_FPGA_REG_RESET_USB = 0x0000; - SyncExBus(); - ASB2364_FPGA_REG_RESET_AV = 0x0000; - SyncExBus(); - - /* set up the external interrupts */ - - /* XIRQ[0]: NAND RXBY */ - /* SET_XIRQ_TRIGGER(0, XIRQ_TRIGGER_LOWLEVEL); */ - - /* XIRQ[1]: LAN, UART, I2C, USB, PCI, FPGA */ - SET_XIRQ_TRIGGER(1, XIRQ_TRIGGER_LOWLEVEL); - - /* XIRQ[2]: Extend Slot 1-9 */ - /* SET_XIRQ_TRIGGER(2, XIRQ_TRIGGER_LOWLEVEL); */ - -#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL) && \ - defined(CONFIG_ETHERNET_IRQ_LEVEL) && \ - (CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL) -# error CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL -#endif - -#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL) - set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); -#elif defined(CONFIG_ETHERNET_IRQ_LEVEL) - set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_ETHERNET_IRQ_LEVEL)); -#endif -} - -/* - * initialise the rest of the unit hardware after gdbstub is ready - */ -asmlinkage void __init unit_setup(void) -{ - /* Release the reset on the SMSC911X so that it is ready by the time we - * need it */ - ASB2364_FPGA_REG_RESET_LAN = 0x0001; - SyncExBus(); - ASB2364_FPGA_REG_RESET_UART = 0x0001; - SyncExBus(); - ASB2364_FPGA_REG_RESET_I2C = 0x0001; - SyncExBus(); - ASB2364_FPGA_REG_RESET_USB = 0x0001; - SyncExBus(); - ASB2364_FPGA_REG_RESET_AV = 0x0001; - SyncExBus(); - - /* Make sure the ethernet chipset isn't going to give us an interrupt - * storm from stuff it was doing pre-reset */ - LAN_IRQ_CFG = 0; - LAN_INT_EN = 0; -} - -/* - * initialise the external interrupts used by a unit of this type - */ -void __init unit_init_IRQ(void) -{ - unsigned int extnum; - - for (extnum = 0 ; extnum < NR_XIRQS ; extnum++) { - switch (GET_XIRQ_TRIGGER(extnum)) { - /* LEVEL triggered interrupts should be made - * post-ACK'able as they hold their lines until - * serviced - */ - case XIRQ_TRIGGER_HILEVEL: - case XIRQ_TRIGGER_LOWLEVEL: - mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); - break; - default: - break; - } - } - -#define IRQCTL __SYSREG(0xd5000090, u32) - IRQCTL |= 0x02; - - irq_fpga_init(); -} |