diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/powerpc/kernel/setup_32.c | 113 |
1 files changed, 23 insertions, 90 deletions
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index d544fa311757..00f57754407e 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -36,8 +36,6 @@ #include <asm/time.h> #include <asm/serial.h> #include <asm/udbg.h> -#include <asm/mmu_context.h> -#include <asm/epapr_hcalls.h> #include <asm/code-patching.h> #define DBG(fmt...) @@ -62,9 +60,7 @@ int icache_bsize; int ucache_bsize; /* - * We're called here very early in the boot. We determine the machine - * type and call the appropriate low-level setup functions. - * -- Cort <cort@fsmlabs.com> + * We're called here very early in the boot. * * Note that the kernel may be running at an address which is different * from the address that it was linked at, so we must use RELOC/PTRRELOC @@ -73,7 +69,6 @@ int ucache_bsize; notrace unsigned long __init early_init(unsigned long dt_ptr) { unsigned long offset = reloc_offset(); - struct cpu_spec *spec; /* First zero the BSS -- use memset_io, some platforms don't have * caches on yet */ @@ -84,27 +79,19 @@ notrace unsigned long __init early_init(unsigned long dt_ptr) * Identify the CPU type and fix up code sections * that depend on which cpu we have. */ - spec = identify_cpu(offset, mfspr(SPRN_PVR)); + identify_cpu(offset, mfspr(SPRN_PVR)); - do_feature_fixups(spec->cpu_features, - PTRRELOC(&__start___ftr_fixup), - PTRRELOC(&__stop___ftr_fixup)); - - do_feature_fixups(spec->mmu_features, - PTRRELOC(&__start___mmu_ftr_fixup), - PTRRELOC(&__stop___mmu_ftr_fixup)); - - do_lwsync_fixups(spec->cpu_features, - PTRRELOC(&__start___lwsync_fixup), - PTRRELOC(&__stop___lwsync_fixup)); - - do_final_fixups(); + apply_feature_fixups(); return KERNELBASE + offset; } /* + * This is run before start_kernel(), the kernel has been relocated + * and we are running with enough of the MMU enabled to have our + * proper kernel virtual addresses + * * Find out what kind of machine we're on and save any data we need * from the early boot process (devtree is copied on pmac by prom_init()). * This is called very early on the boot process, after a minimal @@ -123,27 +110,9 @@ notrace void __init machine_init(u64 dt_ptr) /* Do some early initialization based on the flat device tree */ early_init_devtree(__va(dt_ptr)); - epapr_paravirt_early_init(); - early_init_mmu(); - probe_machine(); - setup_kdump_trampoline(); - -#ifdef CONFIG_6xx - if (cpu_has_feature(CPU_FTR_CAN_DOZE) || - cpu_has_feature(CPU_FTR_CAN_NAP)) - ppc_md.power_save = ppc6xx_idle; -#endif - -#ifdef CONFIG_E500 - if (cpu_has_feature(CPU_FTR_CAN_DOZE) || - cpu_has_feature(CPU_FTR_CAN_NAP)) - ppc_md.power_save = e500_idle; -#endif - if (ppc_md.progress) - ppc_md.progress("id mach(): done", 0x200); } /* Checks "l2cr=xxxx" command-line option */ @@ -221,7 +190,7 @@ int __init ppc_init(void) arch_initcall(ppc_init); -static void __init irqstack_early_init(void) +void __init irqstack_early_init(void) { unsigned int i; @@ -236,7 +205,7 @@ static void __init irqstack_early_init(void) } #if defined(CONFIG_BOOKE) || defined(CONFIG_40x) -static void __init exc_lvl_early_init(void) +void __init exc_lvl_early_init(void) { unsigned int i, hw_cpu; @@ -259,33 +228,25 @@ static void __init exc_lvl_early_init(void) #endif } } -#else -#define exc_lvl_early_init() #endif -/* Warning, IO base is not yet inited */ -void __init setup_arch(char **cmdline_p) +void __init setup_power_save(void) { - *cmdline_p = boot_command_line; - - /* so udelay does something sensible, assume <= 1000 bogomips */ - loops_per_jiffy = 500000000 / HZ; - - unflatten_device_tree(); - check_for_initrd(); - - if (ppc_md.init_early) - ppc_md.init_early(); - - find_legacy_serial_ports(); - - smp_setup_cpu_maps(); - - /* Register early console */ - register_early_udbg_console(); +#ifdef CONFIG_6xx + if (cpu_has_feature(CPU_FTR_CAN_DOZE) || + cpu_has_feature(CPU_FTR_CAN_NAP)) + ppc_md.power_save = ppc6xx_idle; +#endif - xmon_setup(); +#ifdef CONFIG_E500 + if (cpu_has_feature(CPU_FTR_CAN_DOZE) || + cpu_has_feature(CPU_FTR_CAN_NAP)) + ppc_md.power_save = e500_idle; +#endif +} +__init void initialize_cache_info(void) +{ /* * Set cache line size based on type of cpu as a default. * Systems with OF can look in the properties on the cpu node(s) @@ -296,32 +257,4 @@ void __init setup_arch(char **cmdline_p) ucache_bsize = 0; if (cpu_has_feature(CPU_FTR_UNIFIED_ID_CACHE)) ucache_bsize = icache_bsize = dcache_bsize; - - if (ppc_md.panic) - setup_panic(); - - init_mm.start_code = (unsigned long)_stext; - init_mm.end_code = (unsigned long) _etext; - init_mm.end_data = (unsigned long) _edata; - init_mm.brk = klimit; - - exc_lvl_early_init(); - - irqstack_early_init(); - - initmem_init(); - if ( ppc_md.progress ) ppc_md.progress("setup_arch: initmem", 0x3eab); - -#ifdef CONFIG_DUMMY_CONSOLE - conswitchp = &dummy_con; -#endif - - if (ppc_md.setup_arch) - ppc_md.setup_arch(); - if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab); - - paging_init(); - - /* Initialize the MMU context management stuff */ - mmu_context_init(); } |