1 files changed, 372 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
new file mode 100644
index 000000000000..9680ae99b084
--- /dev/null
+++ b/arch/powerpc/kernel/setup_32.c
@@ -0,0 +1,372 @@
+/*
+ * Common prep/pmac/chrp boot and setup code.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/ide.h>
+#include <linux/tty.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/cpu.h>
+#include <linux/console.h>
+
+#include <asm/residual.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/setup.h>
+#include <asm/amigappc.h>
+#include <asm/smp.h>
+#include <asm/elf.h>
+#include <asm/cputable.h>
+#include <asm/bootx.h>
+#include <asm/btext.h>
+#include <asm/machdep.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/pmac_feature.h>
+#include <asm/sections.h>
+#include <asm/nvram.h>
+#include <asm/xmon.h>
+#include <asm/time.h>
+
+#define DBG(fmt...)
+
+#if defined CONFIG_KGDB
+#include <asm/kgdb.h>
+#endif
+
+extern void platform_init(void);
+extern void bootx_init(unsigned long r4, unsigned long phys);
+
+extern void ppc6xx_idle(void);
+extern void power4_idle(void);
+
+boot_infos_t *boot_infos;
+struct ide_machdep_calls ppc_ide_md;
+
+/* XXX should go elsewhere */
+int __irq_offset_value;
+EXPORT_SYMBOL(__irq_offset_value);
+
+int boot_cpuid;
+EXPORT_SYMBOL_GPL(boot_cpuid);
+int boot_cpuid_phys;
+
+unsigned long ISA_DMA_THRESHOLD;
+unsigned int DMA_MODE_READ;
+unsigned int DMA_MODE_WRITE;
+
+int have_of = 1;
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+int _machine = 0;
+
+extern void prep_init(void);
+extern void pmac_init(void);
+extern void chrp_init(void);
+
+dev_t boot_dev;
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+#ifdef CONFIG_MAGIC_SYSRQ
+unsigned long SYSRQ_KEY = 0x54;
+#endif /* CONFIG_MAGIC_SYSRQ */
+
+#ifdef CONFIG_VGA_CONSOLE
+unsigned long vgacon_remap_base;
+#endif
+
+struct machdep_calls ppc_md;
+EXPORT_SYMBOL(ppc_md);
+
+/*
+ * These are used in binfmt_elf.c to put aux entries on the stack
+ * for each elf executable being started.
+ */
+int dcache_bsize;
+int icache_bsize;
+int ucache_bsize;
+
+/*
+ * We're called here very early in the boot.  We determine the machine
+ * type and call the appropriate low-level setup functions.
+ *  -- Cort <cort@fsmlabs.com>
+ *
+ * Note that the kernel may be running at an address which is different
+ * from the address that it was linked at, so we must use RELOC/PTRRELOC
+ * to access static data (including strings).  -- paulus
+ */
+unsigned long __init early_init(unsigned long dt_ptr)
+{
+	unsigned long offset = reloc_offset();
+
+	/* First zero the BSS -- use memset_io, some platforms don't have
+	 * caches on yet */
+	memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start);
+
+	/*
+	 * Identify the CPU type and fix up code sections
+	 * that depend on which cpu we have.
+	 */
+	identify_cpu(offset, 0);
+	do_cpu_ftr_fixups(offset);
+
+	return KERNELBASE + offset;
+}
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+/*
+ * The PPC_MULTIPLATFORM version of platform_init...
+ */
+void __init platform_init(void)
+{
+	/* if we didn't get any bootinfo telling us what we are... */
+	if (_machine == 0) {
+		/* prep boot loader tells us if we're prep or not */
+		if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
+			_machine = _MACH_prep;
+	}
+
+#ifdef CONFIG_PPC_PREP
+	/* not much more to do here, if prep */
+	if (_machine == _MACH_prep) {
+		prep_init();
+		return;
+	}
+#endif
+
+#ifdef CONFIG_ADB
+	if (strstr(cmd_line, "adb_sync")) {
+		extern int __adb_probe_sync;
+		__adb_probe_sync = 1;
+	}
+#endif /* CONFIG_ADB */
+
+	switch (_machine) {
+#ifdef CONFIG_PPC_PMAC
+	case _MACH_Pmac:
+		pmac_init();
+		break;
+#endif
+#ifdef CONFIG_PPC_CHRP
+	case _MACH_chrp:
+		chrp_init();
+		break;
+#endif
+	}
+}
+#endif
+
+/*
+ * Find out what kind of machine we're on and save any data we need
+ * from the early boot process (devtree is copied on pmac by prom_init()).
+ * This is called very early on the boot process, after a minimal
+ * MMU environment has been set up but before MMU_init is called.
+ */
+void __init machine_init(unsigned long dt_ptr, unsigned long phys)
+{
+	early_init_devtree(__va(dt_ptr));
+
+#ifdef CONFIG_CMDLINE
+	strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
+#endif /* CONFIG_CMDLINE */
+
+	platform_init();
+
+#ifdef CONFIG_6xx
+	ppc_md.power_save = ppc6xx_idle;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("id mach(): done", 0x200);
+}
+
+#ifdef CONFIG_BOOKE_WDT
+/* Checks wdt=x and wdt_period=xx command-line option */
+int __init early_parse_wdt(char *p)
+{
+	if (p && strncmp(p, "0", 1) != 0)
+	       booke_wdt_enabled = 1;
+
+	return 0;
+}
+early_param("wdt", early_parse_wdt);
+
+int __init early_parse_wdt_period (char *p)
+{
+	if (p)
+		booke_wdt_period = simple_strtoul(p, NULL, 0);
+
+	return 0;
+}
+early_param("wdt_period", early_parse_wdt_period);
+#endif	/* CONFIG_BOOKE_WDT */
+
+/* Checks "l2cr=xxxx" command-line option */
+int __init ppc_setup_l2cr(char *str)
+{
+	if (cpu_has_feature(CPU_FTR_L2CR)) {
+		unsigned long val = simple_strtoul(str, NULL, 0);
+		printk(KERN_INFO "l2cr set to %lx\n", val);
+		_set_L2CR(0);		/* force invalidate by disable cache */
+		_set_L2CR(val);		/* and enable it */
+	}
+	return 1;
+}
+__setup("l2cr=", ppc_setup_l2cr);
+
+#ifdef CONFIG_GENERIC_NVRAM
+
+/* Generic nvram hooks used by drivers/char/gen_nvram.c */
+unsigned char nvram_read_byte(int addr)
+{
+	if (ppc_md.nvram_read_val)
+		return ppc_md.nvram_read_val(addr);
+	return 0xff;
+}
+EXPORT_SYMBOL(nvram_read_byte);
+
+void nvram_write_byte(unsigned char val, int addr)
+{
+	if (ppc_md.nvram_write_val)
+		ppc_md.nvram_write_val(addr, val);
+}
+EXPORT_SYMBOL(nvram_write_byte);
+
+void nvram_sync(void)
+{
+	if (ppc_md.nvram_sync)
+		ppc_md.nvram_sync();
+}
+EXPORT_SYMBOL(nvram_sync);
+
+#endif /* CONFIG_NVRAM */
+
+static struct cpu cpu_devices[NR_CPUS];
+
+int __init ppc_init(void)
+{
+	int i;
+
+	/* clear the progress line */
+	if ( ppc_md.progress ) ppc_md.progress("             ", 0xffff);
+
+	/* register CPU devices */
+	for (i = 0; i < NR_CPUS; i++)
+		if (cpu_possible(i))
+			register_cpu(&cpu_devices[i], i, NULL);
+
+	/* call platform init */
+	if (ppc_md.init != NULL) {
+		ppc_md.init();
+	}
+	return 0;
+}
+
+arch_initcall(ppc_init);
+
+/* Warning, IO base is not yet inited */
+void __init setup_arch(char **cmdline_p)
+{
+	extern char *klimit;
+	extern void do_init_bootmem(void);
+
+	/* so udelay does something sensible, assume <= 1000 bogomips */
+	loops_per_jiffy = 500000000 / HZ;
+
+	unflatten_device_tree();
+	finish_device_tree();
+
+#ifdef CONFIG_BOOTX_TEXT
+	init_boot_display();
+#endif
+
+#ifdef CONFIG_PPC_PMAC
+	/* This could be called "early setup arch", it must be done
+	 * now because xmon need it
+	 */
+	if (_machine == _MACH_Pmac)
+		pmac_feature_init();	/* New cool way */
+#endif
+
+#ifdef CONFIG_XMON
+	xmon_map_scc();
+	if (strstr(cmd_line, "xmon")) {
+		xmon_init(1);
+		debugger(NULL);
+	}
+#endif /* CONFIG_XMON */
+	if ( ppc_md.progress ) ppc_md.progress("setup_arch: enter", 0x3eab);
+
+#if defined(CONFIG_KGDB)
+	if (ppc_md.kgdb_map_scc)
+		ppc_md.kgdb_map_scc();
+	set_debug_traps();
+	if (strstr(cmd_line, "gdb")) {
+		if (ppc_md.progress)
+			ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
+		printk("kgdb breakpoint activated\n");
+		breakpoint();
+	}
+#endif
+
+	/*
+	 * Set cache line size based on type of cpu as a default.
+	 * Systems with OF can look in the properties on the cpu node(s)
+	 * for a possibly more accurate value.
+	 */
+	if (cpu_has_feature(CPU_FTR_SPLIT_ID_CACHE)) {
+		dcache_bsize = cur_cpu_spec->dcache_bsize;
+		icache_bsize = cur_cpu_spec->icache_bsize;
+		ucache_bsize = 0;
+	} else
+		ucache_bsize = dcache_bsize = icache_bsize
+			= cur_cpu_spec->dcache_bsize;
+
+	/* reboot on panic */
+	panic_timeout = 180;
+
+	init_mm.start_code = PAGE_OFFSET;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
+	init_mm.brk = (unsigned long) klimit;
+
+	/* Save unparsed command line copy for /proc/cmdline */
+	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
+	*cmdline_p = cmd_line;
+
+	parse_early_param();
+
+	/* set up the bootmem stuff with available memory */
+	do_init_bootmem();
+	if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
+
+#ifdef CONFIG_PPC_OCP
+	/* Initialize OCP device list */
+	ocp_early_init();
+	if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab);
+#endif
+
+#ifdef CONFIG_DUMMY_CONSOLE
+	conswitchp = &dummy_con;
+#endif
+
+	ppc_md.setup_arch();
+	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
+
+	paging_init();
+
+	/* this is for modules since _machine can be a define -- Cort */
+	ppc_md.ppc_machine = _machine;
+}