diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/powerpc/platforms/85xx/Kconfig | 9 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/mpc8540_ads.h | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/mpc85xx_ads.c | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/mpc85xx_cds.c | 359 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/mpc85xx_cds.h | 43 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/pci.c | 6 |
7 files changed, 414 insertions, 6 deletions
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 06e371282f57..454fc53289ab 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -11,13 +11,20 @@ config MPC8540_ADS help This option enables support for the MPC 8540 ADS board +config MPC85xx_CDS + bool "Freescale MPC85xx CDS" + select DEFAULT_UIMAGE + select PPC_I8259 if PCI + help + This option enables support for the MPC85xx CDS board + endchoice config MPC8540 bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC8540_ADS + default y if MPC8540_ADS || MPC85xx_CDS config PPC_INDIRECT_PCI_BE bool diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index ffc4139cb214..7615aa59c78b 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_PPC_85xx) += misc.o pci.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o +obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o diff --git a/arch/powerpc/platforms/85xx/mpc8540_ads.h b/arch/powerpc/platforms/85xx/mpc8540_ads.h index f770cadb2080..c0d56d2bb5a5 100644 --- a/arch/powerpc/platforms/85xx/mpc8540_ads.h +++ b/arch/powerpc/platforms/85xx/mpc8540_ads.h @@ -17,7 +17,6 @@ #ifndef __MACH_MPC8540ADS_H__ #define __MACH_MPC8540ADS_H__ -#include <linux/config.h> #include <linux/initrd.h> #define BOARD_CCSRBAR ((uint)0xe0000000) diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 5eeff370f5fc..06a497676c99 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -11,7 +11,6 @@ * option) any later version. */ -#include <linux/config.h> #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/pci.h> diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c new file mode 100644 index 000000000000..18e6e11f7020 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -0,0 +1,359 @@ +/* + * MPC85xx setup and early boot code plus other random bits. + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2005 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/module.h> +#include <linux/fsl_devices.h> + +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/bootinfo.h> +#include <asm/pci-bridge.h> +#include <asm/mpc85xx.h> +#include <asm/irq.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <asm/i8259.h> + +#include <sysdev/fsl_soc.h> +#include "mpc85xx.h" + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +static int cds_pci_slot = 2; +static volatile u8 *cadmus; + +/* + * Internal interrupts are all Level Sensitive, and Positive Polarity + * + * Note: Likely, this table and the following function should be + * obtained and derived from the OF Device Tree. + */ +static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { + MPC85XX_INTERNAL_IRQ_SENSES, +#if defined(CONFIG_PCI) + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Ext 0: PCI slot 0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 3 */ +#else + 0x0, /* External 0: */ + 0x0, /* External 1: */ + 0x0, /* External 2: */ + 0x0, /* External 3: */ +#endif + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ + 0x0, /* External 6: */ + 0x0, /* External 7: */ + 0x0, /* External 8: */ + 0x0, /* External 9: */ + 0x0, /* External 10: */ +#ifdef CONFIG_PCI + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 11: PCI2 slot 0 */ +#else + 0x0, /* External 11: */ +#endif +}; + + +#ifdef CONFIG_PCI +/* + * interrupt routing + */ +int +mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); + + if (!hose->index) + { + /* Handle PCI1 interrupts */ + char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + + /* Note IRQ assignment for slots is based on which slot the elysium is + * in -- in this setup elysium is in slot #2 (this PIRQA as first + * interrupt on slot */ + { + { 0, 1, 2, 3 }, /* 16 - PMC */ + { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ + { 0, 1, 2, 3 }, /* 18 - Slot 1 */ + { 1, 2, 3, 0 }, /* 19 - Slot 2 */ + { 2, 3, 0, 1 }, /* 20 - Slot 3 */ + { 3, 0, 1, 2 }, /* 21 - Slot 4 */ + }; + + const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4; + int i, j; + + for (i = 0; i < 6; i++) + for (j = 0; j < 4; j++) + pci_irq_table[i][j] = + ((pci_irq_table[i][j] + 5 - + cds_pci_slot) & 0x3) + PIRQ0A; + + return PCI_IRQ_TABLE_LOOKUP; + } else { + /* Handle PCI2 interrupts (if we have one) */ + char pci_irq_table[][4] = + { + /* + * We only have one slot and one interrupt + * going to PIRQA - PIRQD */ + { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */ + }; + + const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4; + + return PCI_IRQ_TABLE_LOOKUP; + } +} + +#define ARCADIA_HOST_BRIDGE_IDSEL 17 +#define ARCADIA_2ND_BRIDGE_IDSEL 3 + +extern int mpc85xx_pci2_busno; + +int +mpc85xx_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + if (mpc85xx_pci2_busno) + if (bus == (mpc85xx_pci2_busno) && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + /* We explicitly do not go past the Tundra 320 Bridge */ + if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) + return PCIBIOS_DEVICE_NOT_FOUND; + if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +void __init +mpc85xx_cds_pcibios_fixup(void) +{ + struct pci_dev *dev; + u_char c; + + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_1, NULL))) { + /* + * U-Boot does not set the enable bits + * for the IDE device. Force them on here. + */ + pci_read_config_byte(dev, 0x40, &c); + c |= 0x03; /* IDE: Chip Enable Bits */ + pci_write_config_byte(dev, 0x40, c); + + /* + * Since only primary interface works, force the + * IDE function to standard primary IDE interrupt + * w/ 8259 offset + */ + dev->irq = 14; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + pci_dev_put(dev); + } + + /* + * Force legacy USB interrupt routing + */ + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, NULL))) { + dev->irq = 10; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10); + pci_dev_put(dev); + } + + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, dev))) { + dev->irq = 11; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); + pci_dev_put(dev); + } +} +#endif /* CONFIG_PCI */ + +void __init mpc85xx_cds_pic_init(void) +{ + struct mpic *mpic1; + phys_addr_t OpenPIC_PAddr; + + /* Determine the Physical Address of the OpenPIC regs */ + OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; + + mpic1 = mpic_alloc(OpenPIC_PAddr, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, + mpc85xx_cds_openpic_initsenses, + sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC "); + BUG_ON(mpic1 == NULL); + mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); + mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); + mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); + mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); + mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); + mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); + mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); + mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); + + /* dummy mappings to get to 48 */ + mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); + mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); + mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); + mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); + + /* External ints */ + mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); + mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); + mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); + + mpic_init(mpic1); + +#ifdef CONFIG_PCI + mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL); + + i8259_init(0,0); +#endif +} + + +/* + * Setup the architecture + */ +static void __init +mpc85xx_cds_setup_arch(void) +{ + struct device_node *cpu; +#ifdef CONFIG_PCI + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("mpc85xx_cds_setup_arch()", 0); + + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != 0) { + unsigned int *fp; + + fp = (int *)get_property(cpu, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 500000000 / HZ; + of_node_put(cpu); + } + + cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE); + cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1; + + if (ppc_md.progress) { + char buf[40]; + snprintf(buf, 40, "CDS Version = 0x%x in slot %d\n", + cadmus[CM_VER], cds_pci_slot); + ppc_md.progress(buf, 0); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = mpc85xx_map_irq; + ppc_md.pci_exclude_device = mpc85xx_exclude_device; +#endif + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + + +void +mpc85xx_cds_show_cpuinfo(struct seq_file *m) +{ + uint pvid, svid, phid1; + uint memsize = total_memory; + + pvid = mfspr(SPRN_PVR); + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); + seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n", cadmus[CM_VER]); + seq_printf(m, "PVR\t\t: 0x%x\n", pvid); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); + + /* Display the amount of memory */ + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} + + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mpc85xx_cds_probe(void) +{ + /* We always match for now, eventually we should look at + * the flat dev tree to ensure this is the board we are + * supposed to run on + */ + return 1; +} + +define_machine(mpc85xx_cds) { + .name = "MPC85xx CDS", + .probe = mpc85xx_cds_probe, + .setup_arch = mpc85xx_cds_setup_arch, + .init_IRQ = mpc85xx_cds_pic_init, + .show_cpuinfo = mpc85xx_cds_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = mpc85xx_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.h b/arch/powerpc/platforms/85xx/mpc85xx_cds.h new file mode 100644 index 000000000000..671f54ff185a --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.h @@ -0,0 +1,43 @@ +/* + * arch/ppc/platforms/85xx/mpc85xx_cds_common.h + * + * MPC85xx CDS board definitions + * + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * Copyright 2004 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MACH_MPC85XX_CDS_H__ +#define __MACH_MPC85XX_CDS_H__ + +/* CADMUS info */ +#define CADMUS_BASE (0xf8004000) +#define CADMUS_SIZE (256) +#define CM_VER (0) +#define CM_CSR (1) +#define CM_RST (2) + +/* CDS NVRAM/RTC */ +#define CDS_RTC_ADDR (0xf8000000) +#define CDS_RTC_SIZE (8 * 1024) + +/* PCI interrupt controller */ +#define PIRQ0A MPC85xx_IRQ_EXT0 +#define PIRQ0B MPC85xx_IRQ_EXT1 +#define PIRQ0C MPC85xx_IRQ_EXT2 +#define PIRQ0D MPC85xx_IRQ_EXT3 +#define PIRQ1A MPC85xx_IRQ_EXT11 + +#define NR_8259_INTS 16 +#define CPM_IRQ_OFFSET NR_8259_INTS + +#define MPC85xx_OPENPIC_IRQ_OFFSET 80 + +#endif /* __MACH_MPC85XX_CDS_H__ */ diff --git a/arch/powerpc/platforms/85xx/pci.c b/arch/powerpc/platforms/85xx/pci.c index bad290110ed1..1d51f3242ab1 100644 --- a/arch/powerpc/platforms/85xx/pci.c +++ b/arch/powerpc/platforms/85xx/pci.c @@ -9,7 +9,6 @@ * option) any later version. */ -#include <linux/config.h> #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/init.h> @@ -79,9 +78,10 @@ int __init add_bridge(struct device_node *dev) mpc85xx_pci2_busno = hose->first_busno; } - printk(KERN_INFO "Found MPC85xx PCI host bridge at 0x%08lx. " + printk(KERN_INFO "Found MPC85xx PCI host bridge at 0x%016llx. " "Firmware bus number: %d->%d\n", - rsrc.start, hose->first_busno, hose->last_busno); + (unsigned long long)rsrc.start, hose->first_busno, + hose->last_busno); DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", hose, hose->cfg_addr, hose->cfg_data); |