diff options
Diffstat (limited to 'arch/powerpc/platforms/cell/celleb_scc_epci.c')
| -rw-r--r-- | arch/powerpc/platforms/cell/celleb_scc_epci.c | 428 |
1 files changed, 0 insertions, 428 deletions
diff --git a/arch/powerpc/platforms/cell/celleb_scc_epci.c b/arch/powerpc/platforms/cell/celleb_scc_epci.c deleted file mode 100644 index 9438bbed402f..000000000000 --- a/arch/powerpc/platforms/cell/celleb_scc_epci.c +++ /dev/null @@ -1,428 +0,0 @@ -/* - * Support for SCC external PCI - * - * (C) Copyright 2004-2007 TOSHIBA CORPORATION - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/threads.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/pci_regs.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#include <asm/ppc-pci.h> - -#include "celleb_scc.h" -#include "celleb_pci.h" - -#define MAX_PCI_DEVICES 32 -#define MAX_PCI_FUNCTIONS 8 - -#define iob() __asm__ __volatile__("eieio; sync":::"memory") - -static inline PCI_IO_ADDR celleb_epci_get_epci_base( - struct pci_controller *hose) -{ - /* - * Note: - * Celleb epci uses cfg_addr as a base address for - * epci control registers. - */ - - return hose->cfg_addr; -} - -static inline PCI_IO_ADDR celleb_epci_get_epci_cfg( - struct pci_controller *hose) -{ - /* - * Note: - * Celleb epci uses cfg_data as a base address for - * configuration area for epci devices. - */ - - return hose->cfg_data; -} - -static inline void clear_and_disable_master_abort_interrupt( - struct pci_controller *hose) -{ - PCI_IO_ADDR epci_base; - PCI_IO_ADDR reg; - epci_base = celleb_epci_get_epci_base(hose); - reg = epci_base + PCI_COMMAND; - out_be32(reg, in_be32(reg) | (PCI_STATUS_REC_MASTER_ABORT << 16)); -} - -static int celleb_epci_check_abort(struct pci_controller *hose, - PCI_IO_ADDR addr) -{ - PCI_IO_ADDR reg; - PCI_IO_ADDR epci_base; - u32 val; - - iob(); - epci_base = celleb_epci_get_epci_base(hose); - - reg = epci_base + PCI_COMMAND; - val = in_be32(reg); - - if (val & (PCI_STATUS_REC_MASTER_ABORT << 16)) { - out_be32(reg, - (val & 0xffff) | (PCI_STATUS_REC_MASTER_ABORT << 16)); - - /* clear PCI Controller error, FRE, PMFE */ - reg = epci_base + SCC_EPCI_STATUS; - out_be32(reg, SCC_EPCI_INT_PAI); - - reg = epci_base + SCC_EPCI_VCSR; - val = in_be32(reg) & 0xffff; - val |= SCC_EPCI_VCSR_FRE; - out_be32(reg, val); - - reg = epci_base + SCC_EPCI_VISTAT; - out_be32(reg, SCC_EPCI_VISTAT_PMFE); - return PCIBIOS_DEVICE_NOT_FOUND; - } - - return PCIBIOS_SUCCESSFUL; -} - -static PCI_IO_ADDR celleb_epci_make_config_addr(struct pci_bus *bus, - struct pci_controller *hose, unsigned int devfn, int where) -{ - PCI_IO_ADDR addr; - - if (bus != hose->bus) - addr = celleb_epci_get_epci_cfg(hose) + - (((bus->number & 0xff) << 16) - | ((devfn & 0xff) << 8) - | (where & 0xff) - | 0x01000000); - else - addr = celleb_epci_get_epci_cfg(hose) + - (((devfn & 0xff) << 8) | (where & 0xff)); - - pr_debug("EPCI: config_addr = 0x%p\n", addr); - - return addr; -} - -static int celleb_epci_read_config(struct pci_bus *bus, - unsigned int devfn, int where, int size, u32 *val) -{ - PCI_IO_ADDR epci_base; - PCI_IO_ADDR addr; - struct pci_controller *hose = pci_bus_to_host(bus); - - /* allignment check */ - BUG_ON(where % size); - - if (!celleb_epci_get_epci_cfg(hose)) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (bus->number == hose->first_busno && devfn == 0) { - /* EPCI controller self */ - - epci_base = celleb_epci_get_epci_base(hose); - addr = epci_base + where; - - switch (size) { - case 1: - *val = in_8(addr); - break; - case 2: - *val = in_be16(addr); - break; - case 4: - *val = in_be32(addr); - break; - default: - return PCIBIOS_DEVICE_NOT_FOUND; - } - - } else { - - clear_and_disable_master_abort_interrupt(hose); - addr = celleb_epci_make_config_addr(bus, hose, devfn, where); - - switch (size) { - case 1: - *val = in_8(addr); - break; - case 2: - *val = in_le16(addr); - break; - case 4: - *val = in_le32(addr); - break; - default: - return PCIBIOS_DEVICE_NOT_FOUND; - } - } - - pr_debug("EPCI: " - "addr=0x%p, devfn=0x%x, where=0x%x, size=0x%x, val=0x%x\n", - addr, devfn, where, size, *val); - - return celleb_epci_check_abort(hose, NULL); -} - -static int celleb_epci_write_config(struct pci_bus *bus, - unsigned int devfn, int where, int size, u32 val) -{ - PCI_IO_ADDR epci_base; - PCI_IO_ADDR addr; - struct pci_controller *hose = pci_bus_to_host(bus); - - /* allignment check */ - BUG_ON(where % size); - - if (!celleb_epci_get_epci_cfg(hose)) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (bus->number == hose->first_busno && devfn == 0) { - /* EPCI controller self */ - - epci_base = celleb_epci_get_epci_base(hose); - addr = epci_base + where; - - switch (size) { - case 1: - out_8(addr, val); - break; - case 2: - out_be16(addr, val); - break; - case 4: - out_be32(addr, val); - break; - default: - return PCIBIOS_DEVICE_NOT_FOUND; - } - - } else { - - clear_and_disable_master_abort_interrupt(hose); - addr = celleb_epci_make_config_addr(bus, hose, devfn, where); - - switch (size) { - case 1: - out_8(addr, val); - break; - case 2: - out_le16(addr, val); - break; - case 4: - out_le32(addr, val); - break; - default: - return PCIBIOS_DEVICE_NOT_FOUND; - } - } - - return celleb_epci_check_abort(hose, addr); -} - -struct pci_ops celleb_epci_ops = { - .read = celleb_epci_read_config, - .write = celleb_epci_write_config, -}; - -/* to be moved in FW */ -static int __init celleb_epci_init(struct pci_controller *hose) -{ - u32 val; - PCI_IO_ADDR reg; - PCI_IO_ADDR epci_base; - int hwres = 0; - - epci_base = celleb_epci_get_epci_base(hose); - - /* PCI core reset(Internal bus and PCI clock) */ - reg = epci_base + SCC_EPCI_CKCTRL; - val = in_be32(reg); - if (val == 0x00030101) - hwres = 1; - else { - val &= ~(SCC_EPCI_CKCTRL_CRST0 | SCC_EPCI_CKCTRL_CRST1); - out_be32(reg, val); - - /* set PCI core clock */ - val = in_be32(reg); - val |= (SCC_EPCI_CKCTRL_OCLKEN | SCC_EPCI_CKCTRL_LCLKEN); - out_be32(reg, val); - - /* release PCI core reset (internal bus) */ - val = in_be32(reg); - val |= SCC_EPCI_CKCTRL_CRST0; - out_be32(reg, val); - - /* set PCI clock select */ - reg = epci_base + SCC_EPCI_CLKRST; - val = in_be32(reg); - val &= ~SCC_EPCI_CLKRST_CKS_MASK; - val |= SCC_EPCI_CLKRST_CKS_2; - out_be32(reg, val); - - /* set arbiter */ - reg = epci_base + SCC_EPCI_ABTSET; - out_be32(reg, 0x0f1f001f); /* temporary value */ - - /* buffer on */ - reg = epci_base + SCC_EPCI_CLKRST; - val = in_be32(reg); - val |= SCC_EPCI_CLKRST_BC; - out_be32(reg, val); - - /* PCI clock enable */ - val = in_be32(reg); - val |= SCC_EPCI_CLKRST_PCKEN; - out_be32(reg, val); - - /* release PCI core reset (all) */ - reg = epci_base + SCC_EPCI_CKCTRL; - val = in_be32(reg); - val |= (SCC_EPCI_CKCTRL_CRST0 | SCC_EPCI_CKCTRL_CRST1); - out_be32(reg, val); - - /* set base translation registers. (already set by Beat) */ - - /* set base address masks. (already set by Beat) */ - } - - /* release interrupt masks and clear all interrupts */ - reg = epci_base + SCC_EPCI_INTSET; - out_be32(reg, 0x013f011f); /* all interrupts enable */ - reg = epci_base + SCC_EPCI_VIENAB; - val = SCC_EPCI_VIENAB_PMPEE | SCC_EPCI_VIENAB_PMFEE; - out_be32(reg, val); - reg = epci_base + SCC_EPCI_STATUS; - out_be32(reg, 0xffffffff); - reg = epci_base + SCC_EPCI_VISTAT; - out_be32(reg, 0xffffffff); - - /* disable PCI->IB address translation */ - reg = epci_base + SCC_EPCI_VCSR; - val = in_be32(reg); - val &= ~(SCC_EPCI_VCSR_DR | SCC_EPCI_VCSR_AT); - out_be32(reg, val); - - /* set base addresses. (no need to set?) */ - - /* memory space, bus master enable */ - reg = epci_base + PCI_COMMAND; - val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; - out_be32(reg, val); - - /* endian mode setup */ - reg = epci_base + SCC_EPCI_ECMODE; - val = 0x00550155; - out_be32(reg, val); - - /* set control option */ - reg = epci_base + SCC_EPCI_CNTOPT; - val = in_be32(reg); - val |= SCC_EPCI_CNTOPT_O2PMB; - out_be32(reg, val); - - /* XXX: temporay: set registers for address conversion setup */ - reg = epci_base + SCC_EPCI_CNF10_REG; - out_be32(reg, 0x80000008); - reg = epci_base + SCC_EPCI_CNF14_REG; - out_be32(reg, 0x40000008); - - reg = epci_base + SCC_EPCI_BAM0; - out_be32(reg, 0x80000000); - reg = epci_base + SCC_EPCI_BAM1; - out_be32(reg, 0xe0000000); - - reg = epci_base + SCC_EPCI_PVBAT; - out_be32(reg, 0x80000000); - - if (!hwres) { - /* release external PCI reset */ - reg = epci_base + SCC_EPCI_CLKRST; - val = in_be32(reg); - val |= SCC_EPCI_CLKRST_PCIRST; - out_be32(reg, val); - } - - return 0; -} - -static int __init celleb_setup_epci(struct device_node *node, - struct pci_controller *hose) -{ - struct resource r; - - pr_debug("PCI: celleb_setup_epci()\n"); - - /* - * Note: - * Celleb epci uses cfg_addr and cfg_data member of - * pci_controller structure in irregular way. - * - * cfg_addr is used to map for control registers of - * celleb epci. - * - * cfg_data is used for configuration area of devices - * on Celleb epci buses. - */ - - if (of_address_to_resource(node, 0, &r)) - goto error; - hose->cfg_addr = ioremap(r.start, resource_size(&r)); - if (!hose->cfg_addr) - goto error; - pr_debug("EPCI: cfg_addr map 0x%016llx->0x%016lx + 0x%016llx\n", - r.start, (unsigned long)hose->cfg_addr, resource_size(&r)); - - if (of_address_to_resource(node, 2, &r)) - goto error; - hose->cfg_data = ioremap(r.start, resource_size(&r)); - if (!hose->cfg_data) - goto error; - pr_debug("EPCI: cfg_data map 0x%016llx->0x%016lx + 0x%016llx\n", - r.start, (unsigned long)hose->cfg_data, resource_size(&r)); - - hose->ops = &celleb_epci_ops; - celleb_epci_init(hose); - - return 0; - -error: - if (hose->cfg_addr) - iounmap(hose->cfg_addr); - - if (hose->cfg_data) - iounmap(hose->cfg_data); - return 1; -} - -struct celleb_phb_spec celleb_epci_spec __initdata = { - .setup = celleb_setup_epci, - .ops = &spiderpci_ops, - .iowa_init = &spiderpci_iowa_init, - .iowa_data = (void *)0, -}; |