diff options
Diffstat (limited to 'arch/powerpc/platforms/chrp')
| -rw-r--r-- | arch/powerpc/platforms/chrp/pci.c | 16 | ||||
| -rw-r--r-- | arch/powerpc/platforms/chrp/setup.c | 104 | ||||
| -rw-r--r-- | arch/powerpc/platforms/chrp/smp.c | 2 |
3 files changed, 74 insertions, 48 deletions
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c index ac224876ce59..6802cdc3168a 100644 --- a/arch/powerpc/platforms/chrp/pci.c +++ b/arch/powerpc/platforms/chrp/pci.c @@ -2,7 +2,6 @@ * CHRP pci routines. */ -#include <linux/config.h> #include <linux/kernel.h> #include <linux/pci.h> #include <linux/delay.h> @@ -19,7 +18,6 @@ #include <asm/machdep.h> #include <asm/sections.h> #include <asm/pci-bridge.h> -#include <asm/open_pic.h> #include <asm/grackle.h> #include <asm/rtas.h> @@ -143,7 +141,7 @@ hydra_init(void) if (np == NULL || of_address_to_resource(np, 0, &r)) return 0; Hydra = ioremap(r.start, r.end-r.start); - printk("Hydra Mac I/O at %lx\n", r.start); + printk("Hydra Mac I/O at %llx\n", (unsigned long long)r.start); printk("Hydra Feature_Control was %x", in_le32(&Hydra->Feature_Control)); out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN | @@ -162,15 +160,9 @@ void __init chrp_pcibios_fixup(void) { struct pci_dev *dev = NULL; - struct device_node *np; - /* PCI interrupts are controlled by the OpenPIC */ - for_each_pci_dev(dev) { - np = pci_device_to_OF_node(dev); - if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0)) - dev->irq = np->intrs[0].line; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } + for_each_pci_dev(dev) + pci_read_irq_line(dev); } #define PRG_CL_RESET_VALID 0x00010000 @@ -267,7 +259,7 @@ chrp_find_bridges(void) bus_range[0], bus_range[1]); printk(" controlled by %s", dev->type); if (!is_longtrail) - printk(" at %lx", r.start); + printk(" at %llx", (unsigned long long)r.start); printk("\n"); hose = pcibios_alloc_controller(); diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 18d89f38796b..538e337d63e2 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -8,7 +8,6 @@ * bootup setup stuff.. */ -#include <linux/config.h> #include <linux/errno.h> #include <linux/sched.h> #include <linux/kernel.h> @@ -25,7 +24,7 @@ #include <linux/reboot.h> #include <linux/init.h> #include <linux/pci.h> -#include <linux/version.h> +#include <linux/utsrelease.h> #include <linux/adb.h> #include <linux/module.h> #include <linux/delay.h> @@ -60,7 +59,7 @@ void rtas_indicator_progress(char *, unsigned short); int _chrp_type; EXPORT_SYMBOL(_chrp_type); -struct mpic *chrp_mpic; +static struct mpic *chrp_mpic; /* Used for doing CHRP event-scans */ DEFINE_PER_CPU(struct timer_list, heartbeat_timer); @@ -316,24 +315,32 @@ chrp_event_scan(unsigned long unused) jiffies + event_scan_interval); } +static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + unsigned int cascade_irq = i8259_irq(regs); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); +} + /* * Finds the open-pic node and sets up the mpic driver. */ static void __init chrp_find_openpic(void) { struct device_node *np, *root; - int len, i, j, irq_count; + int len, i, j; int isu_size, idu_size; unsigned int *iranges, *opprop = NULL; int oplen = 0; unsigned long opaddr; int na = 1; - unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS]; - np = find_type_devices("open-pic"); + np = of_find_node_by_type(NULL, "open-pic"); if (np == NULL) return; - root = find_path_device("/"); + root = of_find_node_by_path("/"); if (root) { opprop = (unsigned int *) get_property (root, "platform-open-pic", &oplen); @@ -344,19 +351,15 @@ static void __init chrp_find_openpic(void) oplen /= na * sizeof(unsigned int); } else { struct resource r; - if (of_address_to_resource(np, 0, &r)) - return; + if (of_address_to_resource(np, 0, &r)) { + goto bail; + } opaddr = r.start; oplen = 0; } printk(KERN_INFO "OpenPIC at %lx\n", opaddr); - irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */ - prom_get_irq_senses(init_senses, NUM_ISA_INTERRUPTS, NR_IRQS - 4); - /* i8259 cascade is always positive level */ - init_senses[0] = IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE; - iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len); if (iranges == NULL) len = 0; /* non-distributed mpic */ @@ -383,15 +386,12 @@ static void __init chrp_find_openpic(void) if (len > 1) isu_size = iranges[3]; - chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY, - isu_size, NUM_ISA_INTERRUPTS, irq_count, - NR_IRQS - 4, init_senses, irq_count, - " MPIC "); + chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY, + isu_size, 0, " MPIC "); if (chrp_mpic == NULL) { printk(KERN_ERR "Failed to allocate MPIC structure\n"); - return; + goto bail; } - j = na - 1; for (i = 1; i < len; ++i) { iranges += 2; @@ -403,7 +403,10 @@ static void __init chrp_find_openpic(void) } mpic_init(chrp_mpic); - mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL); + ppc_md.get_irq = mpic_get_irq; + bail: + of_node_put(root); + of_node_put(np); } #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) @@ -414,14 +417,34 @@ static struct irqaction xmon_irqaction = { }; #endif -void __init chrp_init_IRQ(void) +static void __init chrp_find_8259(void) { - struct device_node *np; + struct device_node *np, *pic = NULL; unsigned long chrp_int_ack = 0; -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) - struct device_node *kbd; -#endif + unsigned int cascade_irq; + + /* Look for cascade */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + pic = np; + break; + } + /* Ok, 8259 wasn't found. We need to handle the case where + * we have a pegasos that claims to be chrp but doesn't have + * a proper interrupt tree + */ + if (pic == NULL && chrp_mpic != NULL) { + printk(KERN_ERR "i8259: Not found in device-tree" + " assuming no legacy interrupts\n"); + return; + } + /* Look for intack. In a perfect world, we would look for it on + * the ISA bus that holds the 8259 but heh... Works that way. If + * we ever see a problem, we can try to re-use the pSeries code here. + * Also, Pegasos-type platforms don't have a proper node to start + * from anyway + */ for (np = find_devices("pci"); np != NULL; np = np->next) { unsigned int *addrp = (unsigned int *) get_property(np, "8259-interrupt-acknowledge", NULL); @@ -432,11 +455,29 @@ void __init chrp_init_IRQ(void) break; } if (np == NULL) - printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n"); + printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" + " address, polling\n"); + + i8259_init(pic, chrp_int_ack); + if (ppc_md.get_irq == NULL) + ppc_md.get_irq = i8259_irq; + if (chrp_mpic != NULL) { + cascade_irq = irq_of_parse_and_map(pic, 0); + if (cascade_irq == NO_IRQ) + printk(KERN_ERR "i8259: failed to map cascade irq\n"); + else + set_irq_chained_handler(cascade_irq, + chrp_8259_cascade); + } +} +void __init chrp_init_IRQ(void) +{ +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) + struct device_node *kbd; +#endif chrp_find_openpic(); - - i8259_init(chrp_int_ack, 0); + chrp_find_8259(); if (_chrp_type == _CHRP_Pegasos) ppc_md.get_irq = i8259_irq; @@ -521,10 +562,6 @@ static int __init chrp_probe(void) DMA_MODE_READ = 0x44; DMA_MODE_WRITE = 0x48; isa_io_base = CHRP_ISA_IO_BASE; /* default value */ - ppc_do_canonicalize_irqs = 1; - - /* Assume we have an 8259... */ - __irq_offset_value = NUM_ISA_INTERRUPTS; return 1; } @@ -536,7 +573,6 @@ define_machine(chrp) { .init = chrp_init2, .show_cpuinfo = chrp_show_cpuinfo, .init_IRQ = chrp_init_IRQ, - .get_irq = mpic_get_irq, .pcibios_fixup = chrp_pcibios_fixup, .restart = rtas_restart, .power_off = rtas_power_off, diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index b616053bc331..1d2307e87c30 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -8,7 +8,6 @@ * */ -#include <linux/config.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/smp.h> @@ -30,7 +29,6 @@ #include <asm/smp.h> #include <asm/residual.h> #include <asm/time.h> -#include <asm/open_pic.h> #include <asm/machdep.h> #include <asm/smp.h> #include <asm/mpic.h> |