diff options
Diffstat (limited to 'arch/powerpc/platforms/powernv/pci-p5ioc2.c')
| -rw-r--r-- | arch/powerpc/platforms/powernv/pci-p5ioc2.c | 271 |
1 files changed, 0 insertions, 271 deletions
diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c deleted file mode 100644 index f2bdfea3b68d..000000000000 --- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * Support PCI/PCIe on PowerNV platforms - * - * Currently supports only P5IOC2 - * - * Copyright 2011 Benjamin Herrenschmidt, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/msi.h> - -#include <asm/sections.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#include <asm/machdep.h> -#include <asm/msi_bitmap.h> -#include <asm/ppc-pci.h> -#include <asm/opal.h> -#include <asm/iommu.h> -#include <asm/tce.h> - -#include "powernv.h" -#include "pci.h" - -/* For now, use a fixed amount of TCE memory for each p5ioc2 - * hub, 16M will do - */ -#define P5IOC2_TCE_MEMORY 0x01000000 - -#ifdef CONFIG_PCI_MSI -static int pnv_pci_p5ioc2_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, - unsigned int hwirq, unsigned int virq, - unsigned int is_64, struct msi_msg *msg) -{ - if (WARN_ON(!is_64)) - return -ENXIO; - msg->data = hwirq - phb->msi_base; - msg->address_hi = 0x10000000; - msg->address_lo = 0; - - return 0; -} - -static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb) -{ - unsigned int count; - const __be32 *prop = of_get_property(phb->hose->dn, - "ibm,opal-msi-ranges", NULL); - if (!prop) - return; - - /* Don't do MSI's on p5ioc2 PCI-X are they are not properly - * verified in HW - */ - if (of_device_is_compatible(phb->hose->dn, "ibm,p5ioc2-pcix")) - return; - phb->msi_base = be32_to_cpup(prop); - count = be32_to_cpup(prop + 1); - if (msi_bitmap_alloc(&phb->msi_bmp, count, phb->hose->dn)) { - pr_err("PCI %d: Failed to allocate MSI bitmap !\n", - phb->hose->global_number); - return; - } - phb->msi_setup = pnv_pci_p5ioc2_msi_setup; - phb->msi32_support = 0; - pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n", - count, phb->msi_base); -} -#else -static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb) { } -#endif /* CONFIG_PCI_MSI */ - -static struct iommu_table_ops pnv_p5ioc2_iommu_ops = { - .set = pnv_tce_build, -#ifdef CONFIG_IOMMU_API - .exchange = pnv_tce_xchg, -#endif - .clear = pnv_tce_free, - .get = pnv_tce_get, -}; - -static void pnv_pci_p5ioc2_dma_dev_setup(struct pnv_phb *phb, - struct pci_dev *pdev) -{ - struct iommu_table *tbl = phb->p5ioc2.table_group.tables[0]; - - if (!tbl->it_map) { - tbl->it_ops = &pnv_p5ioc2_iommu_ops; - iommu_init_table(tbl, phb->hose->node); - iommu_register_group(&phb->p5ioc2.table_group, - pci_domain_nr(phb->hose->bus), phb->opal_id); - INIT_LIST_HEAD_RCU(&tbl->it_group_list); - pnv_pci_link_table_and_group(phb->hose->node, 0, - tbl, &phb->p5ioc2.table_group); - } - - set_iommu_table_base(&pdev->dev, tbl); - iommu_add_device(&pdev->dev); -} - -static const struct pci_controller_ops pnv_pci_p5ioc2_controller_ops = { - .dma_dev_setup = pnv_pci_dma_dev_setup, -#ifdef CONFIG_PCI_MSI - .setup_msi_irqs = pnv_setup_msi_irqs, - .teardown_msi_irqs = pnv_teardown_msi_irqs, -#endif -}; - -static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, u64 hub_id, - void *tce_mem, u64 tce_size) -{ - struct pnv_phb *phb; - const __be64 *prop64; - u64 phb_id; - int64_t rc; - static int primary = 1; - struct iommu_table_group *table_group; - struct iommu_table *tbl; - - pr_info(" Initializing p5ioc2 PHB %s\n", np->full_name); - - prop64 = of_get_property(np, "ibm,opal-phbid", NULL); - if (!prop64) { - pr_err(" Missing \"ibm,opal-phbid\" property !\n"); - return; - } - phb_id = be64_to_cpup(prop64); - pr_devel(" PHB-ID : 0x%016llx\n", phb_id); - pr_devel(" TCE AT : 0x%016lx\n", __pa(tce_mem)); - pr_devel(" TCE SZ : 0x%016llx\n", tce_size); - - rc = opal_pci_set_phb_tce_memory(phb_id, __pa(tce_mem), tce_size); - if (rc != OPAL_SUCCESS) { - pr_err(" Failed to set TCE memory, OPAL error %lld\n", rc); - return; - } - - phb = memblock_virt_alloc(sizeof(struct pnv_phb), 0); - phb->hose = pcibios_alloc_controller(np); - if (!phb->hose) { - pr_err(" Failed to allocate PCI controller\n"); - return; - } - - spin_lock_init(&phb->lock); - phb->hose->first_busno = 0; - phb->hose->last_busno = 0xff; - phb->hose->private_data = phb; - phb->hose->controller_ops = pnv_pci_p5ioc2_controller_ops; - phb->hub_id = hub_id; - phb->opal_id = phb_id; - phb->type = PNV_PHB_P5IOC2; - phb->model = PNV_PHB_MODEL_P5IOC2; - - phb->regs = of_iomap(np, 0); - - if (phb->regs == NULL) - pr_err(" Failed to map registers !\n"); - else { - pr_devel(" P_BUID = 0x%08x\n", in_be32(phb->regs + 0x100)); - pr_devel(" P_IOSZ = 0x%08x\n", in_be32(phb->regs + 0x1b0)); - pr_devel(" P_IO_ST = 0x%08x\n", in_be32(phb->regs + 0x1e0)); - pr_devel(" P_MEM1_H = 0x%08x\n", in_be32(phb->regs + 0x1a0)); - pr_devel(" P_MEM1_L = 0x%08x\n", in_be32(phb->regs + 0x190)); - pr_devel(" P_MSZ1_L = 0x%08x\n", in_be32(phb->regs + 0x1c0)); - pr_devel(" P_MEM_ST = 0x%08x\n", in_be32(phb->regs + 0x1d0)); - pr_devel(" P_MEM2_H = 0x%08x\n", in_be32(phb->regs + 0x2c0)); - pr_devel(" P_MEM2_L = 0x%08x\n", in_be32(phb->regs + 0x2b0)); - pr_devel(" P_MSZ2_H = 0x%08x\n", in_be32(phb->regs + 0x2d0)); - pr_devel(" P_MSZ2_L = 0x%08x\n", in_be32(phb->regs + 0x2e0)); - } - - /* Interpret the "ranges" property */ - /* This also maps the I/O region and sets isa_io/mem_base */ - pci_process_bridge_OF_ranges(phb->hose, np, primary); - primary = 0; - - phb->hose->ops = &pnv_pci_ops; - - /* Setup MSI support */ - pnv_pci_init_p5ioc2_msis(phb); - - /* Setup TCEs */ - phb->dma_dev_setup = pnv_pci_p5ioc2_dma_dev_setup; - pnv_pci_setup_iommu_table(&phb->p5ioc2.iommu_table, - tce_mem, tce_size, 0, - IOMMU_PAGE_SHIFT_4K); - /* - * We do not allocate iommu_table as we do not support - * hotplug or SRIOV on P5IOC2 and therefore iommu_free_table() - * should not be called for phb->p5ioc2.table_group.tables[0] ever. - */ - tbl = phb->p5ioc2.table_group.tables[0] = &phb->p5ioc2.iommu_table; - table_group = &phb->p5ioc2.table_group; - table_group->tce32_start = tbl->it_offset << tbl->it_page_shift; - table_group->tce32_size = tbl->it_size << tbl->it_page_shift; -} - -void __init pnv_pci_init_p5ioc2_hub(struct device_node *np) -{ - struct device_node *phbn; - const __be64 *prop64; - u64 hub_id; - void *tce_mem; - uint64_t tce_per_phb; - int64_t rc; - int phb_count = 0; - - pr_info("Probing p5ioc2 IO-Hub %s\n", np->full_name); - - prop64 = of_get_property(np, "ibm,opal-hubid", NULL); - if (!prop64) { - pr_err(" Missing \"ibm,opal-hubid\" property !\n"); - return; - } - hub_id = be64_to_cpup(prop64); - pr_info(" HUB-ID : 0x%016llx\n", hub_id); - - /* Count child PHBs and calculate TCE space per PHB */ - for_each_child_of_node(np, phbn) { - if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") || - of_device_is_compatible(phbn, "ibm,p5ioc2-pciex")) - phb_count++; - } - - if (phb_count <= 0) { - pr_info(" No PHBs for Hub %s\n", np->full_name); - return; - } - - tce_per_phb = __rounddown_pow_of_two(P5IOC2_TCE_MEMORY / phb_count); - pr_info(" Allocating %lld MB of TCE memory per PHB\n", - tce_per_phb >> 20); - - /* Currently allocate 16M of TCE memory for every Hub - * - * XXX TODO: Make it chip local if possible - */ - tce_mem = memblock_virt_alloc(P5IOC2_TCE_MEMORY, P5IOC2_TCE_MEMORY); - pr_debug(" TCE : 0x%016lx..0x%016lx\n", - __pa(tce_mem), __pa(tce_mem) + P5IOC2_TCE_MEMORY - 1); - rc = opal_pci_set_hub_tce_memory(hub_id, __pa(tce_mem), - P5IOC2_TCE_MEMORY); - if (rc != OPAL_SUCCESS) { - pr_err(" Failed to allocate TCE memory, OPAL error %lld\n", rc); - return; - } - - /* Initialize PHBs */ - for_each_child_of_node(np, phbn) { - if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") || - of_device_is_compatible(phbn, "ibm,p5ioc2-pciex")) { - pnv_pci_init_p5ioc2_phb(phbn, hub_id, - tce_mem, tce_per_phb); - tce_mem += tce_per_phb; - } - } -} |