3 files changed, 0 insertions, 159 deletions
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 9fb2d5912c5a..8ea16db5ff48 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -48,16 +48,6 @@ config PPC_HOLLY
 	  Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
 	  Board with TSI108/9 bridge (Hickory/Holly)
 
-config PPC_C2K
-	bool "SBS/GEFanuc C2K board"
-	depends on EMBEDDED6xx
-	select MV64X60
-	select NOT_COHERENT_CACHE
-	select MTD_CFI_I4
-	help
-	  This option enables support for the GE Fanuc C2K board (formerly
-	  an SBS board).
-
 config MVME5100
 	bool "Motorola/Emerson MVME5100"
 	depends on EMBEDDED6xx
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index 12154e3257ad..e656ae9f23c6 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_MPC7448HPC2)	+= mpc7448_hpc2.o
 obj-$(CONFIG_LINKSTATION)	+= linkstation.o ls_uart.o
 obj-$(CONFIG_STORCENTER)	+= storcenter.o
 obj-$(CONFIG_PPC_HOLLY)		+= holly.o
-obj-$(CONFIG_PPC_C2K)		+= c2k.o
 obj-$(CONFIG_USBGECKO_UDBG)	+= usbgecko_udbg.o
 obj-$(CONFIG_GAMECUBE_COMMON)	+= flipper-pic.o
 obj-$(CONFIG_GAMECUBE)		+= gamecube.o
diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c
deleted file mode 100644
index d19e4e759597..000000000000
--- a/arch/powerpc/platforms/embedded6xx/c2k.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Board setup routines for the GEFanuc C2K board
- *
- * Author: Remi Machet <rmachet@slac.stanford.edu>
- *
- * Originated from prpmc2800.c
- *
- * 2008 (c) Stanford University
- * 2007 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/seq_file.h>
-#include <linux/time.h>
-#include <linux/of.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/time.h>
-
-#include <mm/mmu_decl.h>
-
-#include <sysdev/mv64x60.h>
-
-#define MV64x60_MPP_CNTL_0	0x0000
-#define MV64x60_MPP_CNTL_2	0x0008
-
-#define MV64x60_GPP_IO_CNTL	0x0000
-#define MV64x60_GPP_LEVEL_CNTL	0x0010
-#define MV64x60_GPP_VALUE_SET	0x0018
-
-static void __iomem *mv64x60_mpp_reg_base;
-static void __iomem *mv64x60_gpp_reg_base;
-
-static void __init c2k_setup_arch(void)
-{
-	struct device_node *np;
-	phys_addr_t paddr;
-	const unsigned int *reg;
-
-	/*
-	 * ioremap mpp and gpp registers in case they are later
-	 * needed by c2k_reset_board().
-	 */
-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
-	reg = of_get_property(np, "reg", NULL);
-	paddr = of_translate_address(np, reg);
-	of_node_put(np);
-	mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
-
-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
-	reg = of_get_property(np, "reg", NULL);
-	paddr = of_translate_address(np, reg);
-	of_node_put(np);
-	mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
-
-#ifdef CONFIG_PCI
-	mv64x60_pci_init();
-#endif
-}
-
-static void c2k_reset_board(void)
-{
-	u32 temp;
-
-	local_irq_disable();
-
-	temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0);
-	temp &= 0xFFFF0FFF;
-	out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp);
-
-	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
-	temp |= 0x00000004;
-	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
-
-	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
-	temp |= 0x00000004;
-	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
-
-	temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2);
-	temp &= 0xFFFF0FFF;
-	out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp);
-
-	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
-	temp |= 0x00080000;
-	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
-
-	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
-	temp |= 0x00080000;
-	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
-
-	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004);
-}
-
-static void __noreturn c2k_restart(char *cmd)
-{
-	c2k_reset_board();
-	msleep(100);
-	panic("restart failed\n");
-}
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define COHERENCY_SETTING "off"
-#else
-#define COHERENCY_SETTING "on"
-#endif
-
-void c2k_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "Vendor\t\t: GEFanuc\n");
-	seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING);
-}
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init c2k_probe(void)
-{
-	if (!of_machine_is_compatible("GEFanuc,C2K"))
-		return 0;
-
-	printk(KERN_INFO "Detected a GEFanuc C2K board\n");
-
-	_set_L2CR(0);
-	_set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2I);
-
-	mv64x60_init_early();
-
-	return 1;
-}
-
-define_machine(c2k) {
-	.name			= "C2K",
-	.probe			= c2k_probe,
-	.setup_arch		= c2k_setup_arch,
-	.show_cpuinfo		= c2k_show_cpuinfo,
-	.init_IRQ		= mv64x60_init_irq,
-	.get_irq		= mv64x60_get_irq,
-	.restart		= c2k_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-};