diff options
Diffstat (limited to 'arch/powerpc/platforms')
38 files changed, 665 insertions, 295 deletions
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 8abf6fb8f410..0effe9f5a1ea 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -252,6 +252,14 @@ config PPC4xx_GPIO help Enable gpiolib support for ppc440 based boards +config PPC4xx_OCM + bool "PPC4xx On Chip Memory (OCM) support" + depends on 4xx + select PPC_LIB_RHEAP + help + Enable OCM support for PowerPC 4xx platforms with on chip memory, + OCM provides the fast place for memory access to improve performance. + # 44x specific CPU modules, selected based on the board above. config 440EP bool diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c index 9f771e05457c..52d57d281724 100644 --- a/arch/powerpc/platforms/512x/clock.c +++ b/arch/powerpc/platforms/512x/clock.c @@ -26,6 +26,7 @@ #include <linux/of_platform.h> #include <asm/mpc5xxx.h> +#include <asm/mpc5121.h> #include <asm/clk_interface.h> #undef CLK_DEBUG @@ -122,7 +123,7 @@ struct mpc512x_clockctl { u32 dccr; /* DIU Clk Cnfg Reg */ }; -struct mpc512x_clockctl __iomem *clockctl; +static struct mpc512x_clockctl __iomem *clockctl; static int mpc5121_clk_enable(struct clk *clk) { @@ -184,7 +185,7 @@ static unsigned long spmf_mult(void) 36, 40, 44, 48, 52, 56, 60, 64 }; - int spmf = (clockctl->spmr >> 24) & 0xf; + int spmf = (in_be32(&clockctl->spmr) >> 24) & 0xf; return spmf_to_mult[spmf]; } @@ -206,7 +207,7 @@ static unsigned long sysdiv_div_x_2(void) 52, 56, 58, 62, 60, 64, 66, }; - int sysdiv = (clockctl->scfr2 >> 26) & 0x3f; + int sysdiv = (in_be32(&clockctl->scfr2) >> 26) & 0x3f; return sysdiv_to_div_x_2[sysdiv]; } @@ -230,7 +231,7 @@ static unsigned long sys_to_ref(unsigned long rate) static long ips_to_ref(unsigned long rate) { - int ips_div = (clockctl->scfr1 >> 23) & 0x7; + int ips_div = (in_be32(&clockctl->scfr1) >> 23) & 0x7; rate *= ips_div; /* csb_clk = ips_clk * ips_div */ rate *= 2; /* sys_clk = csb_clk * 2 */ @@ -284,7 +285,7 @@ static struct clk sys_clk = { static void diu_clk_calc(struct clk *clk) { - int diudiv_x_2 = clockctl->scfr1 & 0xff; + int diudiv_x_2 = in_be32(&clockctl->scfr1) & 0xff; unsigned long rate; rate = sys_clk.rate; @@ -311,7 +312,7 @@ static void half_clk_calc(struct clk *clk) static void generic_div_clk_calc(struct clk *clk) { - int div = (clockctl->scfr1 >> clk->div_shift) & 0x7; + int div = (in_be32(&clockctl->scfr1) >> clk->div_shift) & 0x7; clk->rate = clk->parent->rate / div; } @@ -329,7 +330,7 @@ static struct clk csb_clk = { static void e300_clk_calc(struct clk *clk) { - int spmf = (clockctl->spmr >> 16) & 0xf; + int spmf = (in_be32(&clockctl->spmr) >> 16) & 0xf; int ratex2 = clk->parent->rate * spmf; clk->rate = ratex2 / 2; @@ -551,7 +552,7 @@ static struct clk ac97_clk = { .calc = ac97_clk_calc, }; -struct clk *rate_clks[] = { +static struct clk *rate_clks[] = { &ref_clk, &sys_clk, &diu_clk, @@ -607,7 +608,7 @@ static void rate_clks_init(void) * There are two clk enable registers with 32 enable bits each * psc clocks and device clocks are all stored in dev_clks */ -struct clk dev_clks[2][32]; +static struct clk dev_clks[2][32]; /* * Given a psc number return the dev_clk @@ -648,12 +649,12 @@ static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np) out_be32(&clockctl->pccr[pscnum], 0x00020000); out_be32(&clockctl->pccr[pscnum], 0x00030000); - if (clockctl->pccr[pscnum] & 0x80) { + if (in_be32(&clockctl->pccr[pscnum]) & 0x80) { clk->rate = spdif_rxclk.rate; return; } - switch ((clockctl->pccr[pscnum] >> 14) & 0x3) { + switch ((in_be32(&clockctl->pccr[pscnum]) >> 14) & 0x3) { case 0: mclk_src = sys_clk.rate; break; @@ -668,7 +669,7 @@ static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np) break; } - mclk_div = ((clockctl->pccr[pscnum] >> 17) & 0x7fff) + 1; + mclk_div = ((in_be32(&clockctl->pccr[pscnum]) >> 17) & 0x7fff) + 1; clk->rate = mclk_src / mclk_div; } @@ -680,13 +681,12 @@ static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np) static void psc_clks_init(void) { struct device_node *np; - const u32 *cell_index; struct platform_device *ofdev; + u32 reg; for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") { - cell_index = of_get_property(np, "cell-index", NULL); - if (cell_index) { - int pscnum = *cell_index; + if (!of_property_read_u32(np, "reg", ®)) { + int pscnum = (reg & 0xf00) >> 8; struct clk *clk = psc_dev_clk(pscnum); clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL; @@ -696,7 +696,7 @@ static void psc_clks_init(void) * AC97 is special rate clock does * not go through normal path */ - if (strcmp("ac97", np->name) == 0) + if (of_device_is_compatible(np, "fsl,mpc5121-psc-ac97")) clk->rate = ac97_clk.rate; else psc_calc_rate(clk, pscnum, np); diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c index 35f14fda108a..d30235b7e3f7 100644 --- a/arch/powerpc/platforms/512x/mpc512x_shared.c +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -68,10 +68,6 @@ struct fsl_diu_shared_fb { bool in_use; }; -void mpc512x_set_monitor_port(enum fsl_diu_monitor_port port) -{ -} - #define DIU_DIV_MASK 0x000000ff void mpc512x_set_pixel_clock(unsigned int pixclock) { @@ -303,7 +299,6 @@ void __init mpc512x_setup_diu(void) } } - diu_ops.set_monitor_port = mpc512x_set_monitor_port; diu_ops.set_pixel_clock = mpc512x_set_pixel_clock; diu_ops.valid_monitor_port = mpc512x_valid_monitor_port; diu_ops.release_bootmem = mpc512x_release_bootmem; @@ -431,8 +426,38 @@ void __init mpc512x_psc_fifo_init(void) void __init mpc512x_init(void) { - mpc512x_declare_of_platform_devices(); mpc5121_clk_init(); + mpc512x_declare_of_platform_devices(); mpc512x_restart_init(); mpc512x_psc_fifo_init(); } + +/** + * mpc512x_cs_config - Setup chip select configuration + * @cs: chip select number + * @val: chip select configuration value + * + * Perform chip select configuration for devices on LocalPlus Bus. + * Intended to dynamically reconfigure the chip select parameters + * for configurable devices on the bus. + */ +int mpc512x_cs_config(unsigned int cs, u32 val) +{ + static struct mpc512x_lpc __iomem *lpc; + struct device_node *np; + + if (cs > 7) + return -EINVAL; + + if (!lpc) { + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-lpc"); + lpc = of_iomap(np, 0); + of_node_put(np); + if (!lpc) + return -ENOMEM; + } + + out_be32(&lpc->cs_cfg[cs], val); + return 0; +} +EXPORT_SYMBOL(mpc512x_cs_config); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c index f9f4537f546d..be7b1aa4d54c 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c @@ -20,9 +20,9 @@ #include <asm/mpc52xx.h> #include <asm/time.h> -#include <sysdev/bestcomm/bestcomm.h> -#include <sysdev/bestcomm/bestcomm_priv.h> -#include <sysdev/bestcomm/gen_bd.h> +#include <linux/fsl/bestcomm/bestcomm.h> +#include <linux/fsl/bestcomm/bestcomm_priv.h> +#include <linux/fsl/bestcomm/gen_bd.h> MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); MODULE_DESCRIPTION("MPC5200 LocalPlus FIFO device driver"); diff --git a/arch/powerpc/platforms/82xx/km82xx.c b/arch/powerpc/platforms/82xx/km82xx.c index cf964e19573a..058cc1895c88 100644 --- a/arch/powerpc/platforms/82xx/km82xx.c +++ b/arch/powerpc/platforms/82xx/km82xx.c @@ -18,11 +18,11 @@ #include <linux/fsl_devices.h> #include <linux/of_platform.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/cpm2.h> #include <asm/udbg.h> #include <asm/machdep.h> -#include <asm/time.h> +#include <linux/time.h> #include <asm/mpc8260.h> #include <asm/prom.h> @@ -36,7 +36,7 @@ static void __init km82xx_pic_init(void) struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic"); if (!np) { - printk(KERN_ERR "PIC init: can not find cpm-pic node\n"); + pr_err("PIC init: can not find cpm-pic node\n"); return; } diff --git a/arch/powerpc/platforms/82xx/pq2.c b/arch/powerpc/platforms/82xx/pq2.c index fb94d10e5a4d..fc8b2d6a7d8d 100644 --- a/arch/powerpc/platforms/82xx/pq2.c +++ b/arch/powerpc/platforms/82xx/pq2.c @@ -71,11 +71,11 @@ err: void __init pq2_init_pci(void) { - struct device_node *np = NULL; + struct device_node *np; ppc_md.pci_exclude_device = pq2_pci_exclude_device; - while ((np = of_find_compatible_node(np, NULL, "fsl,pq2-pci"))) + for_each_compatible_node(np, NULL, "fsl,pq2-pci") pq2_pci_add_bridge(np); } #endif diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c index 89923d723349..bf4c4473abb9 100644 --- a/arch/powerpc/platforms/83xx/km83xx.c +++ b/arch/powerpc/platforms/83xx/km83xx.c @@ -28,8 +28,8 @@ #include <linux/of_device.h> #include <linux/atomic.h> -#include <asm/time.h> -#include <asm/io.h> +#include <linux/time.h> +#include <linux/io.h> #include <asm/machdep.h> #include <asm/ipic.h> #include <asm/irq.h> @@ -43,6 +43,82 @@ #include "mpc83xx.h" #define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revision field */ + +static void quirk_mpc8360e_qe_enet10(void) +{ + /* + * handle mpc8360E Erratum QE_ENET10: + * RGMII AC values do not meet the specification + */ + uint svid = mfspr(SPRN_SVR); + struct device_node *np_par; + struct resource res; + void __iomem *base; + int ret; + + np_par = of_find_node_by_name(NULL, "par_io"); + if (np_par == NULL) { + pr_warn("%s couldn;t find par_io node\n", __func__); + return; + } + /* Map Parallel I/O ports registers */ + ret = of_address_to_resource(np_par, 0, &res); + if (ret) { + pr_warn("%s couldn;t map par_io registers\n", __func__); + return; + } + + base = ioremap(res.start, res.end - res.start + 1); + + /* + * set output delay adjustments to default values according + * table 5 in Errata Rev. 5, 9/2011: + * + * write 0b01 to UCC1 bits 18:19 + * write 0b01 to UCC2 option 1 bits 4:5 + * write 0b01 to UCC2 option 2 bits 16:17 + */ + clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000); + + /* + * set output delay adjustments to default values according + * table 3-13 in Reference Manual Rev.3 05/2010: + * + * write 0b01 to UCC2 option 2 bits 16:17 + * write 0b0101 to UCC1 bits 20:23 + * write 0b0101 to UCC2 option 1 bits 24:27 + */ + clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550); + + if (SVR_REV(svid) == 0x0021) { + /* + * UCC2 option 1: write 0b1010 to bits 24:27 + * at address IMMRBAR+0x14AC + */ + clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0); + } else if (SVR_REV(svid) == 0x0020) { + /* + * UCC1: write 0b11 to bits 18:19 + * at address IMMRBAR+0x14A8 + */ + setbits32((base + 0xa8), 0x00003000); + + /* + * UCC2 option 1: write 0b11 to bits 4:5 + * at address IMMRBAR+0x14A8 + */ + setbits32((base + 0xa8), 0x0c000000); + + /* + * UCC2 option 2: write 0b11 to bits 16:17 + * at address IMMRBAR+0x14AC + */ + setbits32((base + 0xac), 0x0000c000); + } + iounmap(base); + of_node_put(np_par); +} + /* ************************************************************************ * * Setup the architecture @@ -72,84 +148,13 @@ static void __init mpc83xx_km_setup_arch(void) for_each_node_by_name(np, "ucc") par_io_of_config(np); - } - - np = of_find_compatible_node(NULL, "network", "ucc_geth"); - if (np != NULL) { - /* - * handle mpc8360E Erratum QE_ENET10: - * RGMII AC values do not meet the specification - */ - uint svid = mfspr(SPRN_SVR); - struct device_node *np_par; - struct resource res; - void __iomem *base; - int ret; - - np_par = of_find_node_by_name(NULL, "par_io"); - if (np_par == NULL) { - printk(KERN_WARNING "%s couldn;t find par_io node\n", - __func__); - return; - } - /* Map Parallel I/O ports registers */ - ret = of_address_to_resource(np_par, 0, &res); - if (ret) { - printk(KERN_WARNING "%s couldn;t map par_io registers\n", - __func__); - return; - } - - base = ioremap(res.start, res.end - res.start + 1); - - /* - * set output delay adjustments to default values according - * table 5 in Errata Rev. 5, 9/2011: - * - * write 0b01 to UCC1 bits 18:19 - * write 0b01 to UCC2 option 1 bits 4:5 - * write 0b01 to UCC2 option 2 bits 16:17 - */ - clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000); - /* - * set output delay adjustments to default values according - * table 3-13 in Reference Manual Rev.3 05/2010: - * - * write 0b01 to UCC2 option 2 bits 16:17 - * write 0b0101 to UCC1 bits 20:23 - * write 0b0101 to UCC2 option 1 bits 24:27 - */ - clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550); - - if (SVR_REV(svid) == 0x0021) { - /* - * UCC2 option 1: write 0b1010 to bits 24:27 - * at address IMMRBAR+0x14AC - */ - clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0); - } else if (SVR_REV(svid) == 0x0020) { - /* - * UCC1: write 0b11 to bits 18:19 - * at address IMMRBAR+0x14A8 - */ - setbits32((base + 0xa8), 0x00003000); - - /* - * UCC2 option 1: write 0b11 to bits 4:5 - * at address IMMRBAR+0x14A8 - */ - setbits32((base + 0xa8), 0x0c000000); - - /* - * UCC2 option 2: write 0b11 to bits 16:17 - * at address IMMRBAR+0x14AC - */ - setbits32((base + 0xac), 0x0000c000); + /* Only apply this quirk when par_io is available */ + np = of_find_compatible_node(NULL, "network", "ucc_geth"); + if (np != NULL) { + quirk_mpc8360e_qe_enet10(); + of_node_put(np); } - iounmap(base); - of_node_put(np_par); - of_node_put(np); } #endif /* CONFIG_QUICC_ENGINE */ } diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 02d02a09942d..a0dcd577fb0d 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -191,6 +191,13 @@ config SBC8548 help This option enables support for the Wind River SBC8548 board +config PPA8548 + bool "Prodrive PPA8548" + help + This option enables support for the Prodrive PPA8548 board. + select DEFAULT_UIMAGE + select HAS_RAPIDIO + config GE_IMP3A bool "GE Intelligent Platforms IMP3A" select DEFAULT_UIMAGE @@ -245,6 +252,14 @@ config P4080_DS help This option enables support for the P4080 DS board +config SGY_CTS1000 + tristate "Servergy CTS-1000 support" + select GPIOLIB + select OF_GPIO + depends on P4080_DS + help + Enable this to support functionality in Servergy's CTS-1000 systems. + endif # PPC32 config P5020_DS @@ -277,7 +292,6 @@ config P5040_DS config PPC_QEMU_E500 bool "QEMU generic e500 platform" - depends on EXPERIMENTAL select DEFAULT_UIMAGE help This option enables support for running as a QEMU guest using diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 76f679cb04a0..07d0dbb141c0 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -25,8 +25,10 @@ obj-$(CONFIG_P5040_DS) += p5040_ds.o corenet_ds.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_SBC8548) += sbc8548.o +obj-$(CONFIG_PPA8548) += ppa8548.o obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o obj-$(CONFIG_KSI8560) += ksi8560.o obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o +obj-$(CONFIG_SGY_CTS1000) += sgy_cts1000.o diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index bd12588fa252..a7b3621a8df5 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -206,9 +206,7 @@ static void __init mpc85xx_mds_reset_ucc_phys(void) setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); - for (np = NULL; (np = of_find_compatible_node(np, - "network", - "ucc_geth")) != NULL;) { + for_each_compatible_node(np, "network", "ucc_geth") { const unsigned int *prop; int ucc_num; diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index 7328b8d74129..e611e79f23ce 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -106,42 +106,6 @@ (c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \ (c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT)) -/** - * p1022ds_get_pixel_format: return the Area Descriptor for a given pixel depth - * - * The Area Descriptor is a 32-bit value that determine which bits in each - * pixel are to be used for each color. - */ -static u32 p1022ds_get_pixel_format(enum fsl_diu_monitor_port port, - unsigned int bits_per_pixel) -{ - switch (bits_per_pixel) { - case 32: - /* 0x88883316 */ - return MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8); - case 24: - /* 0x88082219 */ - return MAKE_AD(4, 0, 1, 2, 2, 0, 8, 8, 8); - case 16: - /* 0x65053118 */ - return MAKE_AD(4, 2, 1, 0, 1, 5, 6, 5, 0); - default: - pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel); - return 0; - } -} - -/** - * p1022ds_set_gamma_table: update the gamma table, if necessary - * - * On some boards, the gamma table for some ports may need to be modified. - * This is not the case on the P1022DS, so we do nothing. -*/ -static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port, - char *gamma_table_base) -{ -} - struct fsl_law { u32 lawbar; u32 reserved1; @@ -215,13 +179,13 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) /* Map the global utilities registers. */ guts_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); if (!guts_node) { - pr_err("p1022ds: missing global utilties device node\n"); + pr_err("p1022ds: missing global utilities device node\n"); return; } guts = of_iomap(guts_node, 0); if (!guts) { - pr_err("p1022ds: could not map global utilties device\n"); + pr_err("p1022ds: could not map global utilities device\n"); goto exit; } @@ -302,7 +266,7 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) goto exit; } cs1_addr = lbc_br_to_phys(ecm, num_laws, br1); - if (!cs0_addr) { + if (!cs1_addr) { pr_err("p1022ds: could not determine physical address for CS1" " (BR1=%08x)\n", br1); goto exit; @@ -416,14 +380,14 @@ void p1022ds_set_pixel_clock(unsigned int pixclock) /* Map the global utilities registers. */ guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); if (!guts_np) { - pr_err("p1022ds: missing global utilties device node\n"); + pr_err("p1022ds: missing global utilities device node\n"); return; } guts = of_iomap(guts_np, 0); of_node_put(guts_np); if (!guts) { - pr_err("p1022ds: could not map global utilties device\n"); + pr_err("p1022ds: could not map global utilities device\n"); return; } @@ -510,8 +474,6 @@ static void __init p1022_ds_setup_arch(void) ppc_md.progress("p1022_ds_setup_arch()", 0); #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) - diu_ops.get_pixel_format = p1022ds_get_pixel_format; - diu_ops.set_gamma_table = p1022ds_set_gamma_table; diu_ops.set_monitor_port = p1022ds_set_monitor_port; diu_ops.set_pixel_clock = p1022ds_set_pixel_clock; diu_ops.valid_monitor_port = p1022ds_valid_monitor_port; diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c index 55ffa1cc380c..8c9297112b30 100644 --- a/arch/powerpc/platforms/85xx/p1022_rdk.c +++ b/arch/powerpc/platforms/85xx/p1022_rdk.c @@ -35,17 +35,6 @@ #define CLKDVDR_PXCLK_MASK 0x00FF0000 /** - * p1022rdk_set_monitor_port: switch the output to a different monitor port - */ -static void p1022rdk_set_monitor_port(enum fsl_diu_monitor_port port) -{ - if (port != FSL_DIU_PORT_DVI) { - pr_err("p1022rdk: unsupported monitor port %i\n", port); - return; - } -} - -/** * p1022rdk_set_pixel_clock: program the DIU's clock * * @pixclock: the wavelength, in picoseconds, of the clock @@ -124,7 +113,6 @@ static void __init p1022_rdk_setup_arch(void) ppc_md.progress("p1022_rdk_setup_arch()", 0); #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) - diu_ops.set_monitor_port = p1022rdk_set_monitor_port; diu_ops.set_pixel_clock = p1022rdk_set_pixel_clock; diu_ops.valid_monitor_port = p1022rdk_valid_monitor_port; #endif diff --git a/arch/powerpc/platforms/85xx/ppa8548.c b/arch/powerpc/platforms/85xx/ppa8548.c new file mode 100644 index 000000000000..6a7704b92c3b --- /dev/null +++ b/arch/powerpc/platforms/85xx/ppa8548.c @@ -0,0 +1,98 @@ +/* + * ppa8548 setup and early boot code. + * + * Copyright 2009 Prodrive B.V.. + * + * By Stef van Os (see MAINTAINERS for contact information) + * + * Based on the SBC8548 support - Copyright 2007 Wind River Systems Inc. + * Based on the MPC8548CDS support - Copyright 2005 Freescale Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/reboot.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <sysdev/fsl_soc.h> + +static void __init ppa8548_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, + 0, 256, " OpenPIC "); + BUG_ON(mpic == NULL); + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init ppa8548_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("ppa8548_setup_arch()", 0); +} + +static void ppa8548_show_cpuinfo(struct seq_file *m) +{ + uint32_t svid, phid1; + + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Prodrive B.V.\n"); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .name = "soc", }, + { .type = "soc", }, + { .compatible = "simple-bus", }, + { .compatible = "gianfar", }, + { .compatible = "fsl,srio", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(ppa8548, declare_of_platform_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init ppa8548_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "ppa8548"); +} + +define_machine(ppa8548) { + .name = "ppa8548", + .probe = ppa8548_probe, + .setup_arch = ppa8548_setup_arch, + .init_IRQ = ppa8548_pic_init, + .show_cpuinfo = ppa8548_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c index f6ea5618c733..5cefc5a9a144 100644 --- a/arch/powerpc/platforms/85xx/qemu_e500.c +++ b/arch/powerpc/platforms/85xx/qemu_e500.c @@ -29,9 +29,10 @@ void __init qemu_e500_pic_init(void) { struct mpic *mpic; + unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU | + MPIC_ENABLE_COREINT; - mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, - 0, 256, " OpenPIC "); + mpic = mpic_alloc(NULL, 0, flags, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -66,7 +67,7 @@ define_machine(qemu_e500) { #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, #endif - .get_irq = mpic_get_irq, + .get_irq = mpic_get_coreint_irq, .restart = fsl_rstcr_restart, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, diff --git a/arch/powerpc/platforms/85xx/sgy_cts1000.c b/arch/powerpc/platforms/85xx/sgy_cts1000.c new file mode 100644 index 000000000000..611e92f291c4 --- /dev/null +++ b/arch/powerpc/platforms/85xx/sgy_cts1000.c @@ -0,0 +1,176 @@ +/* + * Servergy CTS-1000 Setup + * + * Maintained by Ben Collins <ben.c@servergy.com> + * + * Copyright 2012 by Servergy, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/platform_device.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/of_gpio.h> +#include <linux/workqueue.h> +#include <linux/reboot.h> +#include <linux/interrupt.h> + +#include <asm/machdep.h> + +static struct device_node *halt_node; + +static struct of_device_id child_match[] = { + { + .compatible = "sgy,gpio-halt", + }, + {}, +}; + +static void gpio_halt_wfn(struct work_struct *work) +{ + /* Likely wont return */ + orderly_poweroff(true); +} +static DECLARE_WORK(gpio_halt_wq, gpio_halt_wfn); + +static void gpio_halt_cb(void) +{ + enum of_gpio_flags flags; + int trigger, gpio; + + if (!halt_node) + return; + + gpio = of_get_gpio_flags(halt_node, 0, &flags); + + if (!gpio_is_valid(gpio)) + return; + + trigger = (flags == OF_GPIO_ACTIVE_LOW); + + printk(KERN_INFO "gpio-halt: triggering GPIO.\n"); + + /* Probably wont return */ + gpio_set_value(gpio, trigger); +} + +/* This IRQ means someone pressed the power button and it is waiting for us + * to handle the shutdown/poweroff. */ +static irqreturn_t gpio_halt_irq(int irq, void *__data) +{ + printk(KERN_INFO "gpio-halt: shutdown due to power button IRQ.\n"); + schedule_work(&gpio_halt_wq); + + return IRQ_HANDLED; +}; + +static int __devinit gpio_halt_probe(struct platform_device *pdev) +{ + enum of_gpio_flags flags; + struct device_node *node = pdev->dev.of_node; + int gpio, err, irq; + int trigger; + + if (!node) + return -ENODEV; + + /* If there's no matching child, this isn't really an error */ + halt_node = of_find_matching_node(node, child_match); + if (!halt_node) + return 0; + + /* Technically we could just read the first one, but punish + * DT writers for invalid form. */ + if (of_gpio_count(halt_node) != 1) + return -EINVAL; + + /* Get the gpio number relative to the dynamic base. */ + gpio = of_get_gpio_flags(halt_node, 0, &flags); + if (!gpio_is_valid(gpio)) + return -EINVAL; + + err = gpio_request(gpio, "gpio-halt"); + if (err) { + printk(KERN_ERR "gpio-halt: error requesting GPIO %d.\n", + gpio); + halt_node = NULL; + return err; + } + + trigger = (flags == OF_GPIO_ACTIVE_LOW); + + gpio_direction_output(gpio, !trigger); + + /* Now get the IRQ which tells us when the power button is hit */ + irq = irq_of_parse_and_map(halt_node, 0); + err = request_irq(irq, gpio_halt_irq, IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "gpio-halt", halt_node); + if (err) { + printk(KERN_ERR "gpio-halt: error requesting IRQ %d for " + "GPIO %d.\n", irq, gpio); + gpio_free(gpio); + halt_node = NULL; + return err; + } + + /* Register our halt function */ + ppc_md.halt = gpio_halt_cb; + ppc_md.power_off = gpio_halt_cb; + + printk(KERN_INFO "gpio-halt: registered GPIO %d (%d trigger, %d" + " irq).\n", gpio, trigger, irq); + + return 0; +} + +static int __devexit gpio_halt_remove(struct platform_device *pdev) +{ + if (halt_node) { + int gpio = of_get_gpio(halt_node, 0); + int irq = irq_of_parse_and_map(halt_node, 0); + + free_irq(irq, halt_node); + + ppc_md.halt = NULL; + ppc_md.power_off = NULL; + + gpio_free(gpio); + + halt_node = NULL; + } + + return 0; +} + +static struct of_device_id gpio_halt_match[] = { + /* We match on the gpio bus itself and scan the children since they + * wont be matched against us. We know the bus wont match until it + * has been registered too. */ + { + .compatible = "fsl,qoriq-gpio", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, gpio_halt_match); + +static struct platform_driver gpio_halt_driver = { + .driver = { + .name = "gpio-halt", + .owner = THIS_MODULE, + .of_match_table = gpio_halt_match, + }, + .probe = gpio_halt_probe, + .remove = __devexit_p(gpio_halt_remove), +}; + +module_platform_driver(gpio_halt_driver); + +MODULE_DESCRIPTION("Driver to support GPIO triggered system halt for Servergy CTS-1000 Systems."); +MODULE_VERSION("1.0"); +MODULE_AUTHOR("Ben Collins <ben.c@servergy.com>"); +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 04d9d317f741..d479d68fbb2b 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -236,14 +236,14 @@ void mpc8610hpcd_set_pixel_clock(unsigned int pixclock) /* Map the global utilities registers. */ guts_np = of_find_compatible_node(NULL, NULL, "fsl,mpc8610-guts"); if (!guts_np) { - pr_err("mpc8610hpcd: missing global utilties device node\n"); + pr_err("mpc8610hpcd: missing global utilities device node\n"); return; } guts = of_iomap(guts_np, 0); of_node_put(guts_np); if (!guts) { - pr_err("mpc8610hpcd: could not map global utilties device\n"); + pr_err("mpc8610hpcd: could not map global utilities device\n"); return; } diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 48a920d51489..52de8bccfb30 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -352,8 +352,6 @@ config OF_RTC Uses information from the OF or flattened device tree to instantiate platform devices for direct mapped RTC chips like the DS1742 or DS1743. -source "arch/powerpc/sysdev/bestcomm/Kconfig" - config SIMPLE_GPIO bool "Support for simple, memory-mapped GPIO controllers" depends on PPC diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 72afd2888cad..cea2f09c4241 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -76,6 +76,7 @@ config PPC_BOOK3E_64 bool "Embedded processors" select PPC_FPU # Make it a choice ? select PPC_SMP_MUXED_IPI + select PPC_DOORBELL endchoice @@ -208,6 +209,7 @@ config PPC_FSL_BOOK3E select FSL_EMB_PERFMON select PPC_SMP_MUXED_IPI select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT || PPC64 + select PPC_DOORBELL default y if FSL_BOOKE config PTE_64BIT @@ -382,4 +384,8 @@ config NOT_COHERENT_CACHE config CHECK_CACHE_COHERENCY bool +config PPC_DOORBELL + bool + default n + endmenu diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 2e7ff0c5cf42..53aaefeb3386 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -124,7 +124,7 @@ config CBE_CPUFREQ config CBE_CPUFREQ_PMI_ENABLE bool "CBE frequency scaling using PMI interface" - depends on CBE_CPUFREQ && EXPERIMENTAL + depends on CBE_CPUFREQ default n help Select this, if you want to use the PMI interface diff --git a/arch/powerpc/platforms/cell/celleb_scc_sio.c b/arch/powerpc/platforms/cell/celleb_scc_sio.c index 3a16c5b3c464..9c339ec646f5 100644 --- a/arch/powerpc/platforms/cell/celleb_scc_sio.c +++ b/arch/powerpc/platforms/cell/celleb_scc_sio.c @@ -42,14 +42,13 @@ static struct { static int __init txx9_serial_init(void) { extern int early_serial_txx9_setup(struct uart_port *port); - struct device_node *node = NULL; + struct device_node *node; int i; struct uart_port req; struct of_irq irq; struct resource res; - while ((node = of_find_compatible_node(node, - "serial", "toshiba,sio-scc")) != NULL) { + for_each_compatible_node(node, "serial", "toshiba,sio-scc") { for (i = 0; i < ARRAY_SIZE(txx9_scc_tab); i++) { if (!(txx9_serial_bitmap & (1<<i))) continue; diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c index 75d613313f10..b0ec78e8ad68 100644 --- a/arch/powerpc/platforms/cell/spu_callbacks.c +++ b/arch/powerpc/platforms/cell/spu_callbacks.c @@ -60,13 +60,12 @@ long spu_sys_callback(struct spu_syscall_block *s) syscall = spu_syscall_table[s->nr_ret]; -#ifdef DEBUG - print_symbol(KERN_DEBUG "SPU-syscall %s:", (unsigned long)syscall); - printk("syscall%ld(%lx, %lx, %lx, %lx, %lx, %lx)\n", - s->nr_ret, - s->parm[0], s->parm[1], s->parm[2], - s->parm[3], s->parm[4], s->parm[5]); -#endif + pr_debug("SPU-syscall " + "%pSR:syscall%lld(%llx, %llx, %llx, %llx, %llx, %llx)\n", + syscall, + s->nr_ret, + s->parm[0], s->parm[1], s->parm[2], + s->parm[3], s->parm[4], s->parm[5]); return syscall(s->parm[0], s->parm[1], s->parm[2], s->parm[3], s->parm[4], s->parm[5]); diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 25db92a8e1cf..49318385d4fa 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -24,6 +24,7 @@ #include <linux/errno.h> #include <linux/sched.h> +#include <linux/sched/rt.h> #include <linux/kernel.h> #include <linux/mm.h> #include <linux/slab.h> diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c index 95d00173029f..890f30e70f98 100644 --- a/arch/powerpc/platforms/pasemi/cpufreq.c +++ b/arch/powerpc/platforms/pasemi/cpufreq.c @@ -236,6 +236,13 @@ out: static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) { + /* + * We don't support CPU hotplug. Don't unmap after the system + * has already made it to a running state. + */ + if (system_state != SYSTEM_BOOTING) + return 0; + if (sdcasr_mapbase) iounmap(sdcasr_mapbase); if (sdcpwr_mapbase) diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index 46b7f0232523..e87c19473973 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -48,7 +48,7 @@ config PS3_HTAB_SIZE system will have optimal runtime performance. config PS3_DYNAMIC_DMA - depends on PPC_PS3 && EXPERIMENTAL + depends on PPC_PS3 bool "PS3 Platform dynamic DMA page table management" default n help diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c index d00d7b0a3bda..6cc58201db8c 100644 --- a/arch/powerpc/platforms/ps3/htab.c +++ b/arch/powerpc/platforms/ps3/htab.c @@ -27,6 +27,7 @@ #include <asm/lv1call.h> #include <asm/ps3fb.h> +#define PS3_VERBOSE_RESULT #include "platform.h" /** @@ -75,8 +76,9 @@ static long ps3_hpte_insert(unsigned long hpte_group, unsigned long vpn, if (result) { /* all entries bolted !*/ - pr_info("%s:result=%d vpn=%lx pa=%lx ix=%lx v=%llx r=%llx\n", - __func__, result, vpn, pa, hpte_group, hpte_v, hpte_r); + pr_info("%s:result=%s vpn=%lx pa=%lx ix=%lx v=%llx r=%llx\n", + __func__, ps3_result(result), vpn, pa, hpte_group, + hpte_v, hpte_r); BUG(); } @@ -125,8 +127,8 @@ static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp, &hpte_rs); if (result) { - pr_info("%s: res=%d read vpn=%lx slot=%lx psize=%d\n", - __func__, result, vpn, slot, psize); + pr_info("%s: result=%s read vpn=%lx slot=%lx psize=%d\n", + __func__, ps3_result(result), vpn, slot, psize); BUG(); } @@ -170,8 +172,8 @@ static void ps3_hpte_invalidate(unsigned long slot, unsigned long vpn, result = lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, slot, 0, 0); if (result) { - pr_info("%s: res=%d vpn=%lx slot=%lx psize=%d\n", - __func__, result, vpn, slot, psize); + pr_info("%s: result=%s vpn=%lx slot=%lx psize=%d\n", + __func__, ps3_result(result), vpn, slot, psize); BUG(); } diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 837cf49357ed..9a0941bc4d31 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -17,6 +17,7 @@ config PPC_PSERIES select PPC_NATIVE select PPC_PCI_CHOICE if EXPERT select ZLIB_DEFLATE + select PPC_DOORBELL default y config PPC_SPLPAR diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 890622b87c8f..53866e537a92 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -1,4 +1,4 @@ -ccflags-$(CONFIG_PPC64) := -mno-minimal-toc +ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) ccflags-$(CONFIG_PPC_PSERIES_DEBUG) += -DDEBUG obj-y := lpar.o hvCall.o nvram.o reconfig.o \ diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c index a7648543c59e..0cc0ac07a55d 100644 --- a/arch/powerpc/platforms/pseries/dtl.c +++ b/arch/powerpc/platforms/pseries/dtl.c @@ -57,7 +57,7 @@ static u8 dtl_event_mask = 0x7; */ static int dtl_buf_entries = N_DISPATCH_LOG; -#ifdef CONFIG_VIRT_CPU_ACCOUNTING +#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE struct dtl_ring { u64 write_index; struct dtl_entry *write_ptr; @@ -142,7 +142,7 @@ static u64 dtl_current_index(struct dtl *dtl) return per_cpu(dtl_rings, dtl->cpu).write_index; } -#else /* CONFIG_VIRT_CPU_ACCOUNTING */ +#else /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ static int dtl_start(struct dtl *dtl) { @@ -188,7 +188,7 @@ static u64 dtl_current_index(struct dtl *dtl) { return lppaca_of(dtl->cpu).dtl_idx; } -#endif /* CONFIG_VIRT_CPU_ACCOUNTING */ +#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ static int dtl_enable(struct dtl *dtl) { diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 9a04322b1736..6b73d6c44f51 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -788,7 +788,6 @@ static void eeh_add_device_late(struct pci_dev *dev) dev->dev.archdata.edev = edev; eeh_addr_cache_insert_dev(dev); - eeh_sysfs_add_device(dev); } /** @@ -815,6 +814,29 @@ void eeh_add_device_tree_late(struct pci_bus *bus) EXPORT_SYMBOL_GPL(eeh_add_device_tree_late); /** + * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus + * @bus: PCI bus + * + * This routine must be used to add EEH sysfs files for PCI + * devices which are attached to the indicated PCI bus. The PCI bus + * is added after system boot through hotplug or dlpar. + */ +void eeh_add_sysfs_files(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + eeh_sysfs_add_device(dev); + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + struct pci_bus *subbus = dev->subordinate; + if (subbus) + eeh_add_sysfs_files(subbus); + } + } +} +EXPORT_SYMBOL_GPL(eeh_add_sysfs_files); + +/** * eeh_remove_device - Undo EEH setup for the indicated pci device * @dev: pci device to be removed * @purge_pe: remove the PE or not diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c index 7b56118f531c..aa3693f7fb27 100644 --- a/arch/powerpc/platforms/pseries/firmware.c +++ b/arch/powerpc/platforms/pseries/firmware.c @@ -33,6 +33,11 @@ typedef struct { char * name; } firmware_feature_t; +/* + * The names in this table match names in rtas/ibm,hypertas-functions. If the + * entry ends in a '*', only upto the '*' is matched. Otherwise the entire + * string must match. + */ static __initdata firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = { {FW_FEATURE_PFT, "hcall-pft"}, @@ -57,6 +62,7 @@ firmware_features_table[FIRMWARE_MAX_FEATURES] = { {FW_FEATURE_SPLPAR, "hcall-splpar"}, {FW_FEATURE_VPHN, "hcall-vphn"}, {FW_FEATURE_SET_MODE, "hcall-set-mode"}, + {FW_FEATURE_BEST_ENERGY, "hcall-best-energy-1*"}, }; /* Build up the firmware features bitmask using the contents of @@ -72,9 +78,20 @@ void __init fw_feature_init(const char *hypertas, unsigned long len) for (s = hypertas; s < hypertas + len; s += strlen(s) + 1) { for (i = 0; i < FIRMWARE_MAX_FEATURES; i++) { + const char *name = firmware_features_table[i].name; + size_t size; /* check value against table of strings */ - if (!firmware_features_table[i].name || - strcmp(firmware_features_table[i].name, s)) + if (!name) + continue; + /* + * If there is a '*' at the end of name, only check + * upto there + */ + size = strlen(name); + if (size && name[size - 1] == '*') { + if (strncmp(name, s, size - 1)) + continue; + } else if (strcmp(name, s)) continue; /* we have a match */ diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index a38956269fbf..217ca5c75b20 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -127,9 +127,16 @@ static void pseries_mach_cpu_die(void) get_lppaca()->donate_dedicated_cpu = 1; while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { + while (!prep_irq_for_idle()) { + local_irq_enable(); + local_irq_disable(); + } + extended_cede_processor(cede_latency_hint); } + local_irq_disable(); + if (!get_lppaca()->shared_proc) get_lppaca()->donate_dedicated_cpu = 0; get_lppaca()->idle = 0; @@ -137,6 +144,7 @@ static void pseries_mach_cpu_die(void) if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) { unregister_slb_shadow(hwcpu); + hard_irq_disable(); /* * Call to start_secondary_resume() will not return. * Kernel stack will be reset and start_secondary() diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index e2685badb5db..1b2a174e7c59 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -382,6 +382,7 @@ static int tce_clearrange_multi_pSeriesLP(unsigned long start_pfn, rc = plpar_tce_stuff((u64)be32_to_cpu(maprange->liobn), dma_offset, 0, limit); + next += limit * tce_size; num_tce -= limit; } while (num_tce > 0 && !rc); @@ -786,33 +787,68 @@ static u64 find_existing_ddw(struct device_node *pdn) return dma_addr; } +static void __restore_default_window(struct eeh_dev *edev, + u32 ddw_restore_token) +{ + u32 cfg_addr; + u64 buid; + int ret; + + /* + * Get the config address and phb buid of the PE window. + * Rely on eeh to retrieve this for us. + * Retrieve them from the pci device, not the node with the + * dma-window property + */ + cfg_addr = edev->config_addr; + if (edev->pe_config_addr) + cfg_addr = edev->pe_config_addr; + buid = edev->phb->buid; + + do { + ret = rtas_call(ddw_restore_token, 3, 1, NULL, cfg_addr, + BUID_HI(buid), BUID_LO(buid)); + } while (rtas_busy_delay(ret)); + pr_info("ibm,reset-pe-dma-windows(%x) %x %x %x returned %d\n", + ddw_restore_token, cfg_addr, BUID_HI(buid), BUID_LO(buid), ret); +} + static int find_existing_ddw_windows(void) { - int len; struct device_node *pdn; - struct direct_window *window; const struct dynamic_dma_window_prop *direct64; + const u32 *ddw_extensions; if (!firmware_has_feature(FW_FEATURE_LPAR)) return 0; for_each_node_with_property(pdn, DIRECT64_PROPNAME) { - direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len); + direct64 = of_get_property(pdn, DIRECT64_PROPNAME, NULL); if (!direct64) continue; - window = kzalloc(sizeof(*window), GFP_KERNEL); - if (!window || len < sizeof(struct dynamic_dma_window_prop)) { - kfree(window); - remove_ddw(pdn); - continue; - } + /* + * We need to ensure the IOMMU table is active when we + * return from the IOMMU setup so that the common code + * can clear the table or find the holes. To that end, + * first, remove any existing DDW configuration. + */ + remove_ddw(pdn); - window->device = pdn; - window->prop = direct64; - spin_lock(&direct_window_list_lock); - list_add(&window->list, &direct_window_list); - spin_unlock(&direct_window_list_lock); + /* + * Second, if we are running on a new enough level of + * firmware where the restore API is present, use it to + * restore the 32-bit window, which was removed in + * create_ddw. + * If the API is not present, then create_ddw couldn't + * have removed the 32-bit window in the first place, so + * removing the DDW configuration should be sufficient. + */ + ddw_extensions = of_get_property(pdn, "ibm,ddw-extensions", + NULL); + if (ddw_extensions && ddw_extensions[0] > 0) + __restore_default_window(of_node_to_eeh_dev(pdn), + ddw_extensions[1]); } return 0; @@ -883,32 +919,9 @@ static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail, } static void restore_default_window(struct pci_dev *dev, - u32 ddw_restore_token, unsigned long liobn) + u32 ddw_restore_token) { - struct eeh_dev *edev; - u32 cfg_addr; - u64 buid; - int ret; - - /* - * Get the config address and phb buid of the PE window. - * Rely on eeh to retrieve this for us. - * Retrieve them from the pci device, not the node with the - * dma-window property - */ - edev = pci_dev_to_eeh_dev(dev); - cfg_addr = edev->config_addr; - if (edev->pe_config_addr) - cfg_addr = edev->pe_config_addr; - buid = edev->phb->buid; - - do { - ret = rtas_call(ddw_restore_token, 3, 1, NULL, cfg_addr, - BUID_HI(buid), BUID_LO(buid)); - } while (rtas_busy_delay(ret)); - dev_info(&dev->dev, - "ibm,reset-pe-dma-windows(%x) %x %x %x returned %d\n", - ddw_restore_token, cfg_addr, BUID_HI(buid), BUID_LO(buid), ret); + __restore_default_window(pci_dev_to_eeh_dev(dev), ddw_restore_token); } /* @@ -1099,7 +1112,7 @@ out_free_prop: out_restore_window: if (ddw_restore_token) - restore_default_window(dev, ddw_restore_token, liobn); + restore_default_window(dev, ddw_restore_token); out_unlock: mutex_unlock(&direct_window_init_mutex); @@ -1295,6 +1308,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti switch (action) { case OF_RECONFIG_DETACH_NODE: + remove_ddw(np); if (pci && pci->iommu_table) iommu_free_table(pci->iommu_table, np->full_name); @@ -1307,16 +1321,6 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti } } spin_unlock(&direct_window_list_lock); - - /* - * Because the notifier runs after isolation of the - * slot, we are guaranteed any DMA window has already - * been revoked and the TCEs have been marked invalid, - * so we don't need a call to remove_ddw(np). However, - * if an additional notifier action is added before the - * isolate call, we should update this code for - * completeness with such a call. - */ break; default: err = NOTIFY_DONE; diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index 56b864d777ee..0b580f413a9a 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -40,7 +40,8 @@ void pcibios_name_device(struct pci_dev *dev) */ dn = pci_device_to_OF_node(dev); if (dn) { - const char *loc_code = of_get_property(dn, "ibm,loc-code", 0); + const char *loc_code = of_get_property(dn, "ibm,loc-code", + NULL); if (loc_code) { int loc_len = strlen(loc_code); if (loc_len < sizeof(dev->dev.name)) { diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h index e6cc34a67053..f368668d97b3 100644 --- a/arch/powerpc/platforms/pseries/plpar_wrappers.h +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -2,6 +2,7 @@ #define _PSERIES_PLPAR_WRAPPERS_H #include <linux/string.h> +#include <linux/irqflags.h> #include <asm/hvcall.h> #include <asm/paca.h> @@ -41,7 +42,14 @@ static inline long extended_cede_processor(unsigned long latency_hint) u8 old_latency_hint = get_cede_latency_hint(); set_cede_latency_hint(latency_hint); + rc = cede_processor(); +#ifdef CONFIG_TRACE_IRQFLAGS + /* Ensure that H_CEDE returns with IRQs on */ + if (WARN_ON(!(mfmsr() & MSR_EE))) + __hard_irq_enable(); +#endif + set_cede_latency_hint(old_latency_hint); return rc; @@ -304,4 +312,14 @@ static inline long disable_reloc_on_exceptions(void) { return plpar_set_mode(0, 3, 0, 0); } +static inline long plapr_set_ciabr(unsigned long ciabr) +{ + return plpar_set_mode(0, 1, ciabr, 0); +} + +static inline long plapr_set_watchpoint0(unsigned long dawr0, unsigned long dawrx0) +{ + return plpar_set_mode(0, 2, dawr0, dawrx0); +} + #endif /* _PSERIES_PLPAR_WRAPPERS_H */ diff --git a/arch/powerpc/platforms/pseries/pseries_energy.c b/arch/powerpc/platforms/pseries/pseries_energy.c index af281dce510a..a91e6dadda2c 100644 --- a/arch/powerpc/platforms/pseries/pseries_energy.c +++ b/arch/powerpc/platforms/pseries/pseries_energy.c @@ -21,6 +21,7 @@ #include <asm/cputhreads.h> #include <asm/page.h> #include <asm/hvcall.h> +#include <asm/firmware.h> #define MODULE_VERS "1.0" @@ -32,40 +33,6 @@ static int sysfs_entries; /* Helper routines */ -/* - * Routine to detect firmware support for hcall - * return 1 if H_BEST_ENERGY is supported - * else return 0 - */ - -static int check_for_h_best_energy(void) -{ - struct device_node *rtas = NULL; - const char *hypertas, *s; - int length; - int rc = 0; - - rtas = of_find_node_by_path("/rtas"); - if (!rtas) - return 0; - - hypertas = of_get_property(rtas, "ibm,hypertas-functions", &length); - if (!hypertas) { - of_node_put(rtas); - return 0; - } - - /* hypertas will have list of strings with hcall names */ - for (s = hypertas; s < hypertas + length; s += strlen(s) + 1) { - if (!strncmp("hcall-best-energy-1", s, 19)) { - rc = 1; /* Found the string */ - break; - } - } - of_node_put(rtas); - return rc; -} - /* Helper Routines to convert between drc_index to cpu numbers */ static u32 cpu_to_drc_index(int cpu) @@ -262,7 +229,7 @@ static int __init pseries_energy_init(void) int cpu, err; struct device *cpu_dev; - if (!check_for_h_best_energy()) { + if (!firmware_has_feature(FW_FEATURE_BEST_ENERGY)) { printk(KERN_INFO "Hypercall H_BEST_ENERGY not supported\n"); return 0; } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index ca55882465d6..8bcc9ca6682f 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -65,6 +65,7 @@ #include <asm/smp.h> #include <asm/firmware.h> #include <asm/eeh.h> +#include <asm/reg.h> #include "plpar_wrappers.h" #include "pseries.h" @@ -281,7 +282,7 @@ static struct notifier_block pci_dn_reconfig_nb = { struct kmem_cache *dtl_cache; -#ifdef CONFIG_VIRT_CPU_ACCOUNTING +#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE /* * Allocate space for the dispatch trace log for all possible cpus * and register the buffers with the hypervisor. This is used for @@ -332,12 +333,12 @@ static int alloc_dispatch_logs(void) return 0; } -#else /* !CONFIG_VIRT_CPU_ACCOUNTING */ +#else /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ static inline int alloc_dispatch_logs(void) { return 0; } -#endif /* CONFIG_VIRT_CPU_ACCOUNTING */ +#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ static int alloc_dispatch_log_kmem_cache(void) { @@ -375,7 +376,7 @@ static void pSeries_idle(void) * to ever be a problem in practice we can move this into a kernel thread to * finish off the process later in boot. */ -static int __init pSeries_enable_reloc_on_exc(void) +long pSeries_enable_reloc_on_exc(void) { long rc; unsigned int delay, total_delay = 0; @@ -397,9 +398,9 @@ static int __init pSeries_enable_reloc_on_exc(void) mdelay(delay); } } +EXPORT_SYMBOL(pSeries_enable_reloc_on_exc); -#ifdef CONFIG_KEXEC -static long pSeries_disable_reloc_on_exc(void) +long pSeries_disable_reloc_on_exc(void) { long rc; @@ -410,7 +411,9 @@ static long pSeries_disable_reloc_on_exc(void) mdelay(get_longbusy_msecs(rc)); } } +EXPORT_SYMBOL(pSeries_disable_reloc_on_exc); +#ifdef CONFIG_KEXEC static void pSeries_machine_kexec(struct kimage *image) { long rc; @@ -498,6 +501,14 @@ static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx) return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx); } +static int pseries_set_dawr(unsigned long dawr, unsigned long dawrx) +{ + /* PAPR says we can't set HYP */ + dawrx &= ~DAWRX_HYP; + + return plapr_set_watchpoint0(dawr, dawrx); +} + #define CMO_CHARACTERISTICS_TOKEN 44 #define CMO_MAXLENGTH 1026 @@ -604,6 +615,9 @@ static void __init pSeries_init_early(void) else if (firmware_has_feature(FW_FEATURE_DABR)) ppc_md.set_dabr = pseries_set_dabr; + if (firmware_has_feature(FW_FEATURE_SET_MODE)) + ppc_md.set_dawr = pseries_set_dawr; + pSeries_cmo_feature_init(); iommu_init_early_pSeries(); diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 80cd0be71e06..12bc8c3663ad 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -42,6 +42,7 @@ #include <asm/vdso_datapage.h> #include <asm/cputhreads.h> #include <asm/xics.h> +#include <asm/dbell.h> #include "plpar_wrappers.h" #include "pseries.h" @@ -54,6 +55,11 @@ */ static cpumask_var_t of_spin_mask; +/* + * If we multiplex IPI mechanisms, store the appropriate XICS IPI mechanism here + */ +static void (*xics_cause_ipi)(int cpu, unsigned long data); + /* Query where a cpu is now. Return codes #defined in plpar_wrappers.h */ int smp_query_cpu_stopped(unsigned int pcpu) { @@ -137,6 +143,8 @@ static void smp_xics_setup_cpu(int cpu) { if (cpu != boot_cpuid) xics_setup_cpu(); + if (cpu_has_feature(CPU_FTR_DBELL)) + doorbell_setup_this_cpu(); if (firmware_has_feature(FW_FEATURE_SPLPAR)) vpa_init(cpu); @@ -195,6 +203,27 @@ static int smp_pSeries_cpu_bootable(unsigned int nr) return 1; } +/* Only used on systems that support multiple IPI mechanisms */ +static void pSeries_cause_ipi_mux(int cpu, unsigned long data) +{ + if (cpumask_test_cpu(cpu, cpu_sibling_mask(smp_processor_id()))) + doorbell_cause_ipi(cpu, data); + else + xics_cause_ipi(cpu, data); +} + +static __init int pSeries_smp_probe(void) +{ + int ret = xics_smp_probe(); + + if (cpu_has_feature(CPU_FTR_DBELL)) { + xics_cause_ipi = smp_ops->cause_ipi; + smp_ops->cause_ipi = pSeries_cause_ipi_mux; + } + + return ret; +} + static struct smp_ops_t pSeries_mpic_smp_ops = { .message_pass = smp_mpic_message_pass, .probe = smp_mpic_probe, @@ -204,8 +233,8 @@ static struct smp_ops_t pSeries_mpic_smp_ops = { static struct smp_ops_t pSeries_xics_smp_ops = { .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */ - .cause_ipi = NULL, /* Filled at runtime by xics_smp_probe() */ - .probe = xics_smp_probe, + .cause_ipi = NULL, /* Filled at runtime by pSeries_smp_probe() */ + .probe = pSeries_smp_probe, .kick_cpu = smp_pSeries_kick_cpu, .setup_cpu = smp_xics_setup_cpu, .cpu_bootable = smp_pSeries_cpu_bootable, diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile index 56817ac98fc9..162fc60125a2 100644 --- a/arch/powerpc/platforms/wsp/Makefile +++ b/arch/powerpc/platforms/wsp/Makefile @@ -1,4 +1,4 @@ -ccflags-y += -mno-minimal-toc +ccflags-y += $(NO_MINIMAL_TOC) obj-y += setup.o ics.o wsp.o obj-$(CONFIG_PPC_PSR2) += psr2.o |