6 files changed, 22 insertions, 162 deletions

diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 603b3c656d19..cb5a5bd2cef5 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_FSL_CORENET_RCPM)	+= fsl_rcpm.o
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
 obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
 obj-$(CONFIG_FSL_85XX_CACHE_SRAM)	+= fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
-obj-$(CONFIG_SIMPLE_GPIO)	+= simple_gpio.o
 obj-$(CONFIG_FSL_RIO)		+= fsl_rio.o fsl_rmu.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc_cmos_setup.o
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index ff0e2b156cb5..617a443d673d 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -115,8 +115,8 @@ static void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
 {
 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
 
-	pdev->dev.bus_dma_mask =
-		hose->dma_window_base_cur + hose->dma_window_size;
+	pdev->dev.bus_dma_limit =
+		hose->dma_window_base_cur + hose->dma_window_size - 1;
 }
 
 static void setup_swiotlb_ops(struct pci_controller *hose)
@@ -135,7 +135,7 @@ static void fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
 	 * mapping that allows addressing any RAM address from across PCI.
 	 */
 	if (dev_is_pci(dev) && dma_mask >= pci64_dma_offset * 2 - 1) {
-		dev->bus_dma_mask = 0;
+		dev->bus_dma_limit = 0;
 		dev->archdata.dma_offset = pci64_dma_offset;
 	}
 }
diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c
deleted file mode 100644
index dc1740cd9e42..000000000000
--- a/arch/powerpc/sysdev/simple_gpio.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Simple Memory-Mapped GPIOs
- *
- * Copyright (c) MontaVista Software, Inc. 2008.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio/driver.h>
-#include <linux/slab.h>
-#include <asm/prom.h>
-#include "simple_gpio.h"
-
-struct u8_gpio_chip {
-	struct of_mm_gpio_chip mm_gc;
-	spinlock_t lock;
-
-	/* shadowed data register to clear/set bits safely */
-	u8 data;
-};
-
-static u8 u8_pin2mask(unsigned int pin)
-{
-	return 1 << (8 - 1 - pin);
-}
-
-static int u8_gpio_get(struct gpio_chip *gc, unsigned int gpio)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-
-	return !!(in_8(mm_gc->regs) & u8_pin2mask(gpio));
-}
-
-static void u8_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct u8_gpio_chip *u8_gc = gpiochip_get_data(gc);
-	unsigned long flags;
-
-	spin_lock_irqsave(&u8_gc->lock, flags);
-
-	if (val)
-		u8_gc->data |= u8_pin2mask(gpio);
-	else
-		u8_gc->data &= ~u8_pin2mask(gpio);
-
-	out_8(mm_gc->regs, u8_gc->data);
-
-	spin_unlock_irqrestore(&u8_gc->lock, flags);
-}
-
-static int u8_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
-{
-	return 0;
-}
-
-static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
-	u8_gpio_set(gc, gpio, val);
-	return 0;
-}
-
-static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
-{
-	struct u8_gpio_chip *u8_gc =
-		container_of(mm_gc, struct u8_gpio_chip, mm_gc);
-
-	u8_gc->data = in_8(mm_gc->regs);
-}
-
-static int __init u8_simple_gpiochip_add(struct device_node *np)
-{
-	int ret;
-	struct u8_gpio_chip *u8_gc;
-	struct of_mm_gpio_chip *mm_gc;
-	struct gpio_chip *gc;
-
-	u8_gc = kzalloc(sizeof(*u8_gc), GFP_KERNEL);
-	if (!u8_gc)
-		return -ENOMEM;
-
-	spin_lock_init(&u8_gc->lock);
-
-	mm_gc = &u8_gc->mm_gc;
-	gc = &mm_gc->gc;
-
-	mm_gc->save_regs = u8_gpio_save_regs;
-	gc->ngpio = 8;
-	gc->direction_input = u8_gpio_dir_in;
-	gc->direction_output = u8_gpio_dir_out;
-	gc->get = u8_gpio_get;
-	gc->set = u8_gpio_set;
-
-	ret = of_mm_gpiochip_add_data(np, mm_gc, u8_gc);
-	if (ret)
-		goto err;
-	return 0;
-err:
-	kfree(u8_gc);
-	return ret;
-}
-
-void __init simple_gpiochip_init(const char *compatible)
-{
-	struct device_node *np;
-
-	for_each_compatible_node(np, NULL, compatible) {
-		int ret;
-		struct resource r;
-
-		ret = of_address_to_resource(np, 0, &r);
-		if (ret)
-			goto err;
-
-		switch (resource_size(&r)) {
-		case 1:
-			ret = u8_simple_gpiochip_add(np);
-			if (ret)
-				goto err;
-			break;
-		default:
-			/*
-			 * Whenever you need support for GPIO bank width > 1,
-			 * please just turn u8_ code into huge macros, and
-			 * construct needed uX_ code with it.
-			 */
-			ret = -ENOSYS;
-			goto err;
-		}
-		continue;
-err:
-		pr_err("%pOF: registration failed, status %d\n", np, ret);
-	}
-}
diff --git a/arch/powerpc/sysdev/simple_gpio.h b/arch/powerpc/sysdev/simple_gpio.h
deleted file mode 100644
index f3f3a20d39e2..000000000000
--- a/arch/powerpc/sysdev/simple_gpio.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __SYSDEV_SIMPLE_GPIO_H
-#define __SYSDEV_SIMPLE_GPIO_H
-
-#include <linux/errno.h>
-
-#ifdef CONFIG_SIMPLE_GPIO
-extern void simple_gpiochip_init(const char *compatible);
-#else
-static inline void simple_gpiochip_init(const char *compatible) {}
-#endif /* CONFIG_SIMPLE_GPIO */
-
-#endif /* __SYSDEV_SIMPLE_GPIO_H */
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index df832b09e3e9..f5fadbd2533a 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -1035,6 +1035,15 @@ static int xive_irq_alloc_data(unsigned int virq, irq_hw_number_t hw)
 	xd->target = XIVE_INVALID_TARGET;
 	irq_set_handler_data(virq, xd);
 
+	/*
+	 * Turn OFF by default the interrupt being mapped. A side
+	 * effect of this check is the mapping the ESB page of the
+	 * interrupt in the Linux address space. This prevents page
+	 * fault issues in the crash handler which masks all
+	 * interrupts.
+	 */
+	xive_esb_read(xd, XIVE_ESB_SET_PQ_01);
+
 	return 0;
 }
 
diff --git a/arch/powerpc/sysdev/xive/spapr.c b/arch/powerpc/sysdev/xive/spapr.c
index 33c10749edec..55dc61cb4867 100644
--- a/arch/powerpc/sysdev/xive/spapr.c
+++ b/arch/powerpc/sysdev/xive/spapr.c
@@ -392,20 +392,28 @@ static int xive_spapr_populate_irq_data(u32 hw_irq, struct xive_irq_data *data)
 	data->esb_shift = esb_shift;
 	data->trig_page = trig_page;
 
+	data->hw_irq = hw_irq;
+
 	/*
 	 * No chip-id for the sPAPR backend. This has an impact how we
 	 * pick a target. See xive_pick_irq_target().
 	 */
 	data->src_chip = XIVE_INVALID_CHIP_ID;
 
+	/*
+	 * When the H_INT_ESB flag is set, the H_INT_ESB hcall should
+	 * be used for interrupt management. Skip the remapping of the
+	 * ESB pages which are not available.
+	 */
+	if (data->flags & XIVE_IRQ_FLAG_H_INT_ESB)
+		return 0;
+
 	data->eoi_mmio = ioremap(data->eoi_page, 1u << data->esb_shift);
 	if (!data->eoi_mmio) {
 		pr_err("Failed to map EOI page for irq 0x%x\n", hw_irq);
 		return -ENOMEM;
 	}
 
-	data->hw_irq = hw_irq;
-
 	/* Full function page supports trigger */
 	if (flags & XIVE_SRC_TRIGGER) {
 		data->trig_mmio = data->eoi_mmio;