diff options
Diffstat (limited to 'arch/powerpc')
134 files changed, 2259 insertions, 1054 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index feab3bad6d0f..0a947bd9c076 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -87,10 +87,6 @@ config ARCH_HAS_ILOG2_U64 bool default y if 64BIT -config ARCH_HAS_CPU_IDLE_WAIT - bool - default y - config GENERIC_HWEIGHT bool default y @@ -141,9 +137,10 @@ config PPC select IRQ_FORCED_THREADING select HAVE_RCU_TABLE_FREE if SMP select HAVE_SYSCALL_TRACEPOINTS - select HAVE_BPF_JIT if (PPC64 && NET) + select HAVE_BPF_JIT if PPC64 select HAVE_ARCH_JUMP_LABEL select ARCH_HAVE_NMI_SAFE_CMPXCHG + select GENERIC_SMP_IDLE_THREAD config EARLY_PRINTK bool @@ -353,7 +350,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !PPC_47x)) && EXPERIMENTAL + depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -370,7 +367,7 @@ config KEXEC config CRASH_DUMP bool "Build a kdump crash kernel" - depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP && !PPC_47x) + depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP) select RELOCATABLE if PPC64 || 44x select DYNAMIC_MEMSTART if FSL_BOOKE help diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 6524c6e21896..950d1f7a5a39 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -69,6 +69,16 @@ LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-y) CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=no -mcall-aixdesc CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple + +CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,-mtune=power4) +CFLAGS-$(CONFIG_CELL_CPU) += $(call cc-option,-mcpu=cell) +CFLAGS-$(CONFIG_POWER4_CPU) += $(call cc-option,-mcpu=power4) +CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5) +CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6) +CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7) + +CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell) + KBUILD_CPPFLAGS += -Iarch/$(ARCH) KBUILD_AFLAGS += -Iarch/$(ARCH) KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y) @@ -76,32 +86,11 @@ CPP = $(CC) -E $(KBUILD_CFLAGS) CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__ -ifeq ($(CONFIG_PPC64),y) -GCC_BROKEN_VEC := $(call cc-ifversion, -lt, 0400, y) - -ifeq ($(CONFIG_POWER4_ONLY),y) -ifeq ($(CONFIG_ALTIVEC),y) -ifeq ($(GCC_BROKEN_VEC),y) - KBUILD_CFLAGS += $(call cc-option,-mcpu=970) -else - KBUILD_CFLAGS += $(call cc-option,-mcpu=power4) -endif -else - KBUILD_CFLAGS += $(call cc-option,-mcpu=power4) -endif -else - KBUILD_CFLAGS += $(call cc-option,-mtune=power4) -endif -endif - KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o -ifeq ($(CONFIG_TUNE_CELL),y) - KBUILD_CFLAGS += $(call cc-option,-mtune=cell) -endif - -# No AltiVec instruction when building kernel +# No AltiVec or VSX instructions when building kernel KBUILD_CFLAGS += $(call cc-option,-mno-altivec) +KBUILD_CFLAGS += $(call cc-option,-mno-vsx) # No SPE instruction when building kernel # (We use all available options to help semi-broken compilers) @@ -160,6 +149,7 @@ core-$(CONFIG_KVM) += arch/powerpc/kvm/ core-$(CONFIG_PERF_EVENTS) += arch/powerpc/perf/ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ +drivers-$(CONFIG_CRYPTO_DEV_NX) += drivers/crypto/nx/ # Default to zImage, override when needed all: zImage @@ -234,10 +224,11 @@ archprepare: checkbin # Use the file '.tmp_gas_check' for binutils tests, as gas won't output # to stdout and these checks are run even on install targets. TOUT := .tmp_gas_check -# Ensure this is binutils 2.12.1 (or 2.12.90.0.7) or later for altivec -# instructions. -# gcc-3.4 and binutils-2.14 are a fatal combination. +# Check gcc and binutils versions: +# - gcc-3.4 and binutils-2.14 are a fatal combination +# - Require gcc 4.0 or above on 64-bit +# - gcc-4.2.0 has issues compiling modules on 64-bit checkbin: @if test "$(call cc-version)" = "0304" ; then \ if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \ @@ -247,6 +238,12 @@ checkbin: false; \ fi ; \ fi + @if test "$(call cc-version)" -lt "0400" \ + && test "x${CONFIG_PPC64}" = "xy" ; then \ + echo -n "Sorry, GCC v4.0 or above is required to build " ; \ + echo "the 64-bit powerpc kernel." ; \ + false ; \ + fi @if test "$(call cc-fullversion)" = "040200" \ && test "x${CONFIG_MODULES}${CONFIG_PPC64}" = "xyy" ; then \ echo -n '*** GCC-4.2.0 cannot compile the 64-bit powerpc ' ; \ diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts index 7bda373f10ef..9d4917aebe6b 100644 --- a/arch/powerpc/boot/dts/bluestone.dts +++ b/arch/powerpc/boot/dts/bluestone.dts @@ -373,5 +373,30 @@ 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; }; + + MSI: ppc4xx-msi@C10000000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0xC 0x10000000 0x100 + 0xC 0x10000000 0x100>; + sdr-base = <0x36C>; + msi-data = <0x00004440>; + msi-mask = <0x0000ffe0>; + interrupts =<0 1 2 3 4 5 6 7>; + interrupt-parent = <&MSI>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + msi-available-ranges = <0x0 0x100>; + interrupt-map = < + 0 &UIC3 0x18 1 + 1 &UIC3 0x19 1 + 2 &UIC3 0x1A 1 + 3 &UIC3 0x1B 1 + 4 &UIC3 0x1C 1 + 5 &UIC3 0x1D 1 + 6 &UIC3 0x1E 1 + 7 &UIC3 0x1F 1 + >; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi new file mode 100644 index 000000000000..1cf0b77b1efe --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 MPIC Message (Group B) device tree stub [ controller @ offset 0x42400 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +message@42400 { + compatible = "fsl,mpic-v3.1-msgr"; + reg = <0x42400 0x200>; + interrupts = < + 0xb4 2 0 0 + 0xb5 2 0 0 + 0xb6 2 0 0 + 0xb7 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi index fdedf7b1fe0f..71c30eb10056 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi @@ -53,6 +53,16 @@ timer@41100 { 3 0 3 0>; }; +message@41400 { + compatible = "fsl,mpic-v3.1-msgr"; + reg = <0x41400 0x200>; + interrupts = < + 0xb0 2 0 0 + 0xb1 2 0 0 + 0xb2 2 0 0 + 0xb3 2 0 0>; +}; + msi@41600 { compatible = "fsl,mpic-msi"; reg = <0x41600 0x80>; diff --git a/arch/powerpc/boot/dts/p1020mbg-pc.dtsi b/arch/powerpc/boot/dts/p1020mbg-pc.dtsi new file mode 100644 index 000000000000..a24699cfea9c --- /dev/null +++ b/arch/powerpc/boot/dts/p1020mbg-pc.dtsi @@ -0,0 +1,151 @@ +/* + * P1020 MBG-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 128KB for DTB Image */ + reg = <0x0 0x00020000>; + label = "NOR DTB Image"; + }; + + partition@20000 { + /* 3.875 MB for Linux Kernel Image */ + reg = <0x00020000 0x003e0000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 58MB for Root file System */ + reg = <0x00400000 0x03a00000>; + label = "NOR Root File System"; + }; + + partition@3e00000 { + /* This location must not be altered */ + /* 1M for Vitesse 7385 Switch firmware */ + reg = <0x3e00000 0x00100000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@3f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + */ + usb@23000 { + status = "disabled"; + phy_type = "ulpi"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020mbg-pc_32b.dts b/arch/powerpc/boot/dts/p1020mbg-pc_32b.dts new file mode 100644 index 000000000000..ab8f076eae90 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020mbg-pc_32b.dts @@ -0,0 +1,89 @@ +/* + * P1020 MBG-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020MBG-PC"; + compatible = "fsl,P1020MBG-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NOR and L2 switch */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020mbg-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020mbg-pc_36b.dts b/arch/powerpc/boot/dts/p1020mbg-pc_36b.dts new file mode 100644 index 000000000000..9e9f401419b1 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020mbg-pc_36b.dts @@ -0,0 +1,89 @@ +/* + * P1020 MBG-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020MBG-PC"; + compatible = "fsl,P1020MBG-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0x0 0x1000>; + + /* NOR and L2 switch */ + ranges = <0x0 0x0 0xf 0xec000000 0x04000000 + 0x1 0x0 0xf 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020mbg-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020utm-pc.dtsi b/arch/powerpc/boot/dts/p1020utm-pc.dtsi new file mode 100644 index 000000000000..7ea85eabcc5c --- /dev/null +++ b/arch/powerpc/boot/dts/p1020utm-pc.dtsi @@ -0,0 +1,140 @@ +/* + * P1020 UTM-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 256KB for DTB Image */ + reg = <0x0 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@40000 { + /* 3.75 MB for Linux Kernel Image */ + reg = <0x00040000 0x003c0000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 27MB for Root file System */ + reg = <0x00400000 0x01b00000>; + label = "NOR Root File System"; + }; + + partition@1f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x01f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + */ + usb@23000 { + status = "disabled"; + phy_type = "ulpi"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020utm-pc_32b.dts b/arch/powerpc/boot/dts/p1020utm-pc_32b.dts new file mode 100644 index 000000000000..4bfdd8971cdb --- /dev/null +++ b/arch/powerpc/boot/dts/p1020utm-pc_32b.dts @@ -0,0 +1,89 @@ +/* + * P1020 UTM-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020UTM-PC"; + compatible = "fsl,P1020UTM-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NOR */ + ranges = <0x0 0x0 0x0 0xec000000 0x02000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020utm-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020utm-pc_36b.dts b/arch/powerpc/boot/dts/p1020utm-pc_36b.dts new file mode 100644 index 000000000000..abec53557501 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020utm-pc_36b.dts @@ -0,0 +1,89 @@ +/* + * P1020 UTM-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020UTM-PC"; + compatible = "fsl,P1020UTM-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0x0 0x1000>; + + /* NOR */ + ranges = <0x0 0x0 0xf 0xec000000 0x02000000 + 0x1 0x0 0xf 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020utm-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts index 4f957db01230..285213976a7f 100644 --- a/arch/powerpc/boot/dts/p2041rdb.dts +++ b/arch/powerpc/boot/dts/p2041rdb.dts @@ -135,7 +135,6 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; - fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -151,7 +150,6 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; - fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -167,7 +165,6 @@ reg = <0xf 0xfe202000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; - fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts index f469145abaeb..22a215e94162 100644 --- a/arch/powerpc/boot/dts/p3041ds.dts +++ b/arch/powerpc/boot/dts/p3041ds.dts @@ -173,7 +173,6 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; - fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -189,7 +188,6 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; - fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -205,7 +203,6 @@ reg = <0xf 0xfe202000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; - fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -221,7 +218,6 @@ reg = <0xf 0xfe203000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; - fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 diff --git a/arch/powerpc/boot/dts/p3060qds.dts b/arch/powerpc/boot/dts/p3060qds.dts index 529042e4b9a2..9ae875c8a211 100644 --- a/arch/powerpc/boot/dts/p3060qds.dts +++ b/arch/powerpc/boot/dts/p3060qds.dts @@ -212,7 +212,6 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; - fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -228,7 +227,6 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; - fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts index 6d60e54e50a0..3e204609d02e 100644 --- a/arch/powerpc/boot/dts/p4080ds.dts +++ b/arch/powerpc/boot/dts/p4080ds.dts @@ -141,7 +141,6 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; - fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -157,7 +156,6 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; - fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -173,7 +171,6 @@ reg = <0xf 0xfe202000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; - fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts index 1c250684c902..27c07ed6adc1 100644 --- a/arch/powerpc/boot/dts/p5020ds.dts +++ b/arch/powerpc/boot/dts/p5020ds.dts @@ -173,7 +173,6 @@ reg = <0xf 0xfe200000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; - fsl,msi = <&msi0>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -189,7 +188,6 @@ reg = <0xf 0xfe201000 0 0x1000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; - fsl,msi = <&msi1>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -205,7 +203,6 @@ reg = <0xf 0xfe202000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; - fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 @@ -221,7 +218,6 @@ reg = <0xf 0xfe203000 0 0x1000>; ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; - fsl,msi = <&msi2>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index 0db9ba0423ff..c09598b31de1 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -100,6 +100,7 @@ CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_SOC=y +CONFIG_SND_POWERPC_SOC=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_CMOS=y CONFIG_EXT2_FS=y diff --git a/arch/powerpc/configs/chroma_defconfig b/arch/powerpc/configs/chroma_defconfig index f104ccde6b53..b1f9597fe312 100644 --- a/arch/powerpc/configs/chroma_defconfig +++ b/arch/powerpc/configs/chroma_defconfig @@ -32,7 +32,7 @@ CONFIG_RD_LZMA=y CONFIG_INITRAMFS_COMPRESSION_GZIP=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y -CONFIG_PERF_COUNTERS=y +CONFIG_PERF_EVENTS=y CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_KPROBES=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index f8aef205d222..91db656294e8 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -116,6 +116,7 @@ CONFIG_SERIAL_8250_RSA=y CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y CONFIG_SPI=y CONFIG_SPI_GPIO=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index 82b13bfcf3c0..6798343580f0 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -71,6 +71,8 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MPC=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_HID_SUPPORT is not set diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 1196c34163b7..07b7f2af2dca 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,5 +1,4 @@ CONFIG_PPC64=y -CONFIG_POWER4_ONLY=y CONFIG_ALTIVEC=y CONFIG_SMP=y CONFIG_NR_CPUS=4 diff --git a/arch/powerpc/configs/gamecube_defconfig b/arch/powerpc/configs/gamecube_defconfig index e74d3a483705..9ef2cc13e1b4 100644 --- a/arch/powerpc/configs/gamecube_defconfig +++ b/arch/powerpc/configs/gamecube_defconfig @@ -8,7 +8,7 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y # CONFIG_ELF_CORE is not set -CONFIG_PERF_COUNTERS=y +CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLAB=y CONFIG_MODULES=y diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 2244d370f24d..02ac96b679b8 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -1,5 +1,4 @@ CONFIG_PPC64=y -CONFIG_POWER4_ONLY=y CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_EXPERIMENTAL=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index cc87a8441566..62bb723c5b54 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -117,6 +117,7 @@ CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_QE=m CONFIG_NVRAM=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y CONFIG_SPI=y @@ -140,6 +141,7 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_PPC is not set # CONFIG_SND_USB is not set CONFIG_SND_SOC=y +CONFIG_SND_POWERPC_SOC=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 48d6682f2434..d1828427ae55 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -119,6 +119,7 @@ CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_QE=m CONFIG_NVRAM=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y CONFIG_SPI=y @@ -142,6 +143,7 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_PPC is not set # CONFIG_SND_USB is not set CONFIG_SND_SOC=y +CONFIG_SND_POWERPC_SOC=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index f4deb0b78cf0..840a2c2d0430 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -1,5 +1,4 @@ CONFIG_PPC64=y -CONFIG_POWER4_ONLY=y CONFIG_ALTIVEC=y # CONFIG_VIRT_CPU_ACCOUNTING is not set CONFIG_SMP=y diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index ded867871e97..c2f4b4a86ece 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -6,7 +6,6 @@ CONFIG_NR_CPUS=2 CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_SPARSE_IRQ=y CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EMBEDDED=y @@ -25,7 +24,6 @@ CONFIG_PS3_DISK=y CONFIG_PS3_ROM=y CONFIG_PS3_FLASH=y CONFIG_PS3_VRAM=m -CONFIG_PS3_LPM=m # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set @@ -53,8 +51,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_DIAG is not set CONFIG_IPV6=y CONFIG_BT=m -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -63,7 +59,6 @@ CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m CONFIG_BT_HCIBTUSB=m CONFIG_CFG80211=m -# CONFIG_WIRELESS_EXT_SYSFS is not set CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y # CONFIG_MAC80211_RC_MINSTREL is not set @@ -181,7 +176,6 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_WRITECOUNT=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_LIST=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_CRYPTO_CCM=m diff --git a/arch/powerpc/configs/wii_defconfig b/arch/powerpc/configs/wii_defconfig index 175295fbf4f3..1e2b7d062aa4 100644 --- a/arch/powerpc/configs/wii_defconfig +++ b/arch/powerpc/configs/wii_defconfig @@ -9,7 +9,7 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y # CONFIG_ELF_CORE is not set -CONFIG_PERF_COUNTERS=y +CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLAB=y CONFIG_MODULES=y diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h index decad950f11a..5d7fbe1950f9 100644 --- a/arch/powerpc/include/asm/asm-compat.h +++ b/arch/powerpc/include/asm/asm-compat.h @@ -29,18 +29,9 @@ #define PPC_LLARX(t, a, b, eh) PPC_LDARX(t, a, b, eh) #define PPC_STLCX stringify_in_c(stdcx.) #define PPC_CNTLZL stringify_in_c(cntlzd) +#define PPC_MTOCRF(FXM, RS) MTOCRF((FXM), (RS)) #define PPC_LR_STKOFF 16 #define PPC_MIN_STKFRM 112 - -/* Move to CR, single-entry optimized version. Only available - * on POWER4 and later. - */ -#ifdef CONFIG_POWER4_ONLY -#define PPC_MTOCRF stringify_in_c(mtocrf) -#else -#define PPC_MTOCRF stringify_in_c(mtcrf) -#endif - #else /* 32-bit */ /* operations for longs and pointers */ diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h index ce516e5eb0d3..ac3eedb9b74a 100644 --- a/arch/powerpc/include/asm/cputhreads.h +++ b/arch/powerpc/include/asm/cputhreads.h @@ -9,7 +9,7 @@ * Note: This implementation is limited to a power of 2 number of * threads per core and the same number for each core in the system * (though it would work if some processors had less threads as long - * as the CPU numbers are still allocated, just not brought offline). + * as the CPU numbers are still allocated, just not brought online). * * However, the API allows for a different implementation in the future * if needed, as long as you only use the functions and not the variables diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index dd70fac57ec8..62678e365ca0 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -22,9 +22,11 @@ /* Some dma direct funcs must be visible for use in other dma_ops */ extern void *dma_direct_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs); extern void dma_direct_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs); #ifdef CONFIG_NOT_COHERENT_CACHE @@ -130,23 +132,29 @@ static inline int dma_supported(struct device *dev, u64 mask) extern int dma_set_mask(struct device *dev, u64 dma_mask); -static inline void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) +#define dma_alloc_coherent(d,s,h,f) dma_alloc_attrs(d,s,h,f,NULL) + +static inline void *dma_alloc_attrs(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) { struct dma_map_ops *dma_ops = get_dma_ops(dev); void *cpu_addr; BUG_ON(!dma_ops); - cpu_addr = dma_ops->alloc_coherent(dev, size, dma_handle, flag); + cpu_addr = dma_ops->alloc(dev, size, dma_handle, flag, attrs); debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr); return cpu_addr; } -static inline void dma_free_coherent(struct device *dev, size_t size, - void *cpu_addr, dma_addr_t dma_handle) +#define dma_free_coherent(d,s,c,h) dma_free_attrs(d,s,c,h,NULL) + +static inline void dma_free_attrs(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle, + struct dma_attrs *attrs) { struct dma_map_ops *dma_ops = get_dma_ops(dev); @@ -154,7 +162,7 @@ static inline void dma_free_coherent(struct device *dev, size_t size, debug_dma_free_coherent(dev, size, cpu_addr, dma_handle); - dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); + dma_ops->free(dev, size, cpu_addr, dma_handle, attrs); } static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h index f3b0c2cc9fea..976835d8f22e 100644 --- a/arch/powerpc/include/asm/epapr_hcalls.h +++ b/arch/powerpc/include/asm/epapr_hcalls.h @@ -134,10 +134,15 @@ * whether they will be clobbered. * * Note that r11 can be used as an output parameter. + * + * The "memory" clobber is only necessary for hcalls where the Hypervisor + * will read or write guest memory. However, we add it to all hcalls because + * the impact is minimal, and we want to ensure that it's present for the + * hcalls that need it. */ /* List of common clobbered registers. Do not use this macro. */ -#define EV_HCALL_CLOBBERS "r0", "r12", "xer", "ctr", "lr", "cc" +#define EV_HCALL_CLOBBERS "r0", "r12", "xer", "ctr", "lr", "cc", "memory" #define EV_HCALL_CLOBBERS8 EV_HCALL_CLOBBERS #define EV_HCALL_CLOBBERS7 EV_HCALL_CLOBBERS8, "r10" diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 548da3aa0a30..d58fc4e4149c 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -288,13 +288,6 @@ label##_hv: \ /* Exception addition: Hard disable interrupts */ #define DISABLE_INTS SOFT_DISABLE_INTS(r10,r11) -/* Exception addition: Keep interrupt state */ -#define ENABLE_INTS \ - ld r11,PACAKMSR(r13); \ - ld r12,_MSR(r1); \ - rlwimi r11,r12,0,MSR_EE; \ - mtmsrd r11,1 - #define ADD_NVGPRS \ bl .save_nvgprs diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h index ce04530d2000..aa4c488589ce 100644 --- a/arch/powerpc/include/asm/fsl_guts.h +++ b/arch/powerpc/include/asm/fsl_guts.h @@ -16,15 +16,6 @@ #define __ASM_POWERPC_FSL_GUTS_H__ #ifdef __KERNEL__ -/* - * These #ifdefs are safe because it's not possible to build a kernel that - * runs on e500 and e600 cores. - */ - -#if !defined(CONFIG_PPC_85xx) && !defined(CONFIG_PPC_86xx) -#error Only 85xx and 86xx SOCs are supported -#endif - /** * Global Utility Registers. * @@ -36,11 +27,7 @@ * different names. In these cases, one name is chosen to avoid extraneous * #ifdefs. */ -#ifdef CONFIG_PPC_85xx -struct ccsr_guts_85xx { -#else -struct ccsr_guts_86xx { -#endif +struct ccsr_guts { __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ @@ -77,11 +64,8 @@ struct ccsr_guts_86xx { u8 res0a8[0xb0 - 0xa8]; __be32 rstcr; /* 0x.00b0 - Reset Control Register */ u8 res0b4[0xc0 - 0xb4]; -#ifdef CONFIG_PPC_85xx - __be32 iovselsr; /* 0x.00c0 - I/O voltage select status register */ -#else - __be32 elbcvselcr; /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */ -#endif + __be32 iovselsr; /* 0x.00c0 - I/O voltage select status register + Called 'elbcvselcr' on 86xx SOCs */ u8 res0c4[0x224 - 0xc4]; __be32 iodelay1; /* 0x.0224 - IO delay control register 1 */ __be32 iodelay2; /* 0x.0228 - IO delay control register 2 */ @@ -136,7 +120,7 @@ struct ccsr_guts_86xx { * ch: The channel on the DMA controller (0, 1, 2, or 3) * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx) */ -static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts, +static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts, unsigned int co, unsigned int ch, unsigned int device) { unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); @@ -172,7 +156,7 @@ static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts, * ch: The channel on the DMA controller (0, 1, 2, or 3) * value: the new value for the bit (0 or 1) */ -static inline void guts_set_pmuxcr_dma(struct ccsr_guts_86xx __iomem *guts, +static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts, unsigned int co, unsigned int ch, unsigned int value) { if ((ch == 0) || (ch == 3)) { diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index 1c324ff55ea8..612252388190 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -77,8 +77,27 @@ #define H_MR_CONDITION -43 #define H_NOT_ENOUGH_RESOURCES -44 #define H_R_STATE -45 -#define H_RESCINDEND -46 -#define H_MULTI_THREADS_ACTIVE -9005 +#define H_RESCINDED -46 +#define H_P2 -55 +#define H_P3 -56 +#define H_P4 -57 +#define H_P5 -58 +#define H_P6 -59 +#define H_P7 -60 +#define H_P8 -61 +#define H_P9 -62 +#define H_TOO_BIG -64 +#define H_OVERLAP -68 +#define H_INTERRUPT -69 +#define H_BAD_DATA -70 +#define H_NOT_ACTIVE -71 +#define H_SG_LIST -72 +#define H_OP_MODE -73 +#define H_COP_HW -74 +#define H_UNSUPPORTED_FLAG_START -256 +#define H_UNSUPPORTED_FLAG_END -511 +#define H_MULTI_THREADS_ACTIVE -9005 +#define H_OUTSTANDING_COP_OPS -9006 /* Long Busy is a condition that can be returned by the firmware @@ -240,6 +259,8 @@ #define H_GET_MPP 0x2D4 #define H_HOME_NODE_ASSOCIATIVITY 0x2EC #define H_BEST_ENERGY 0x2F4 +#define H_RANDOM 0x300 +#define H_COP 0x304 #define H_GET_MPP_X 0x314 #define MAX_HCALL_OPCODE H_GET_MPP_X diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index cf417e510736..0e40843a1c6e 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -18,10 +18,6 @@ #include <linux/atomic.h> -/* Define a way to iterate across irqs. */ -#define for_each_irq(i) \ - for ((i) = 0; (i) < NR_IRQS; ++(i)) - extern atomic_t ppc_n_lost_interrupts; /* This number is used when no interrupt has been assigned */ @@ -33,8 +29,6 @@ extern atomic_t ppc_n_lost_interrupts; /* Same thing, used by the generic IRQ code */ #define NR_IRQS_LEGACY NUM_ISA_INTERRUPTS -struct irq_data; -extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d); extern irq_hw_number_t virq_to_hw(unsigned int virq); /** diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h index aa795ccef294..fd07f43d6622 100644 --- a/arch/powerpc/include/asm/kvm_book3s.h +++ b/arch/powerpc/include/asm/kvm_book3s.h @@ -81,12 +81,13 @@ struct kvmppc_vcpu_book3s { u64 sdr1; u64 hior; u64 msr_mask; - u64 vsid_next; #ifdef CONFIG_PPC_BOOK3S_32 u32 vsid_pool[VSID_POOL_SIZE]; + u32 vsid_next; #else - u64 vsid_first; - u64 vsid_max; + u64 proto_vsid_first; + u64 proto_vsid_max; + u64 proto_vsid_next; #endif int context_id[SID_CONTEXTS]; diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h index a76254af0aaa..531fe0c3108f 100644 --- a/arch/powerpc/include/asm/lppaca.h +++ b/arch/powerpc/include/asm/lppaca.h @@ -20,18 +20,16 @@ #define _ASM_POWERPC_LPPACA_H #ifdef __KERNEL__ -/* These definitions relate to hypervisors that only exist when using +/* + * These definitions relate to hypervisors that only exist when using * a server type processor */ #ifdef CONFIG_PPC_BOOK3S -//============================================================================= -// -// This control block contains the data that is shared between the -// hypervisor (PLIC) and the OS. -// -// -//---------------------------------------------------------------------------- +/* + * This control block contains the data that is shared between the + * hypervisor and the OS. + */ #include <linux/cache.h> #include <linux/threads.h> #include <asm/types.h> @@ -43,123 +41,65 @@ */ #define NR_LPPACAS 1 - -/* The Hypervisor barfs if the lppaca crosses a page boundary. A 1k - * alignment is sufficient to prevent this */ +/* + * The Hypervisor barfs if the lppaca crosses a page boundary. A 1k + * alignment is sufficient to prevent this + */ struct lppaca { -//============================================================================= -// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data -// NOTE: The xDynXyz fields are fields that will be dynamically changed by -// PLIC when preparing to bring a processor online or when dispatching a -// virtual processor! -//============================================================================= - u32 desc; // Eye catcher 0xD397D781 x00-x03 - u16 size; // Size of this struct x04-x05 - u16 reserved1; // Reserved x06-x07 - u16 reserved2:14; // Reserved x08-x09 - u8 shared_proc:1; // Shared processor indicator ... - u8 secondary_thread:1; // Secondary thread indicator ... - volatile u8 dyn_proc_status:8; // Dynamic Status of this proc x0A-x0A - u8 secondary_thread_count; // Secondary thread count x0B-x0B - volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D - volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F - u32 decr_val; // Value for Decr programming x10-x13 - u32 pmc_val; // Value for PMC regs x14-x17 - volatile u32 dyn_hw_node_id; // Dynamic Hardware Node id x18-x1B - volatile u32 dyn_hw_proc_id; // Dynamic Hardware Proc Id x1C-x1F - volatile u32 dyn_pir; // Dynamic ProcIdReg value x20-x23 - u32 dsei_data; // DSEI data x24-x27 - u64 sprg3; // SPRG3 value x28-x2F - u8 reserved3[40]; // Reserved x30-x57 - volatile u8 vphn_assoc_counts[8]; // Virtual processor home node - // associativity change counters x58-x5F - u8 reserved4[32]; // Reserved x60-x7F - -//============================================================================= -// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data -//============================================================================= - // This Dword contains a byte for each type of interrupt that can occur. - // The IPI is a count while the others are just a binary 1 or 0. - union { - u64 any_int; - struct { - u16 reserved; // Reserved - cleared by #mpasmbl - u8 xirr_int; // Indicates xXirrValue is valid or Immed IO - u8 ipi_cnt; // IPI Count - u8 decr_int; // DECR interrupt occurred - u8 pdc_int; // PDC interrupt occurred - u8 quantum_int; // Interrupt quantum reached - u8 old_plic_deferred_ext_int; // Old PLIC has a deferred XIRR pending - } fields; - } int_dword; - - // Whenever any fields in this Dword are set then PLIC will defer the - // processing of external interrupts. Note that PLIC will store the - // XIRR directly into the xXirrValue field so that another XIRR will - // not be presented until this one clears. The layout of the low - // 4-bytes of this Dword is up to SLIC - PLIC just checks whether the - // entire Dword is zero or not. A non-zero value in the low order - // 2-bytes will result in SLIC being granted the highest thread - // priority upon return. A 0 will return to SLIC as medium priority. - u64 plic_defer_ints_area; // Entire Dword - - // Used to pass the real SRR0/1 from PLIC to SLIC as well as to - // pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid. - u64 saved_srr0; // Saved SRR0 x10-x17 - u64 saved_srr1; // Saved SRR1 x18-x1F - - // Used to pass parms from the OS to PLIC for SetAsrAndRfid - u64 saved_gpr3; // Saved GPR3 x20-x27 - u64 saved_gpr4; // Saved GPR4 x28-x2F - union { - u64 saved_gpr5; /* Saved GPR5 x30-x37 */ - struct { - u8 cede_latency_hint; /* x30 */ - u8 reserved[7]; /* x31-x36 */ - } fields; - } gpr5_dword; - - - u8 dtl_enable_mask; // Dispatch Trace Log mask x38-x38 - u8 donate_dedicated_cpu; // Donate dedicated CPU cycles x39-x39 - u8 fpregs_in_use; // FP regs in use x3A-x3A - u8 pmcregs_in_use; // PMC regs in use x3B-x3B - volatile u32 saved_decr; // Saved Decr Value x3C-x3F - volatile u64 emulated_time_base;// Emulated TB for this thread x40-x47 - volatile u64 cur_plic_latency; // Unaccounted PLIC latency x48-x4F - u64 tot_plic_latency; // Accumulated PLIC latency x50-x57 - u64 wait_state_cycles; // Wait cycles for this proc x58-x5F - u64 end_of_quantum; // TB at end of quantum x60-x67 - u64 pdc_saved_sprg1; // Saved SPRG1 for PMC int x68-x6F - u64 pdc_saved_srr0; // Saved SRR0 for PMC int x70-x77 - volatile u32 virtual_decr; // Virtual DECR for shared procsx78-x7B - u16 slb_count; // # of SLBs to maintain x7C-x7D - u8 idle; // Indicate OS is idle x7E - u8 vmxregs_in_use; // VMX registers in use x7F - - -//============================================================================= -// CACHE_LINE_3 0x0100 - 0x017F: This line is shared with other processors -//============================================================================= - // This is the yield_count. An "odd" value (low bit on) means that - // the processor is yielded (either because of an OS yield or a PLIC - // preempt). An even value implies that the processor is currently - // executing. - // NOTE: This value will ALWAYS be zero for dedicated processors and - // will NEVER be zero for shared processors (ie, initialized to a 1). - volatile u32 yield_count; // PLIC increments each dispatchx00-x03 - volatile u32 dispersion_count; // dispatch changed phys cpu x04-x07 - volatile u64 cmo_faults; // CMO page fault count x08-x0F - volatile u64 cmo_fault_time; // CMO page fault time x10-x17 - u8 reserved7[104]; // Reserved x18-x7F - -//============================================================================= -// CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data -//============================================================================= - u32 page_ins; // CMO Hint - # page ins by OS x00-x03 - u8 reserved8[148]; // Reserved x04-x97 - volatile u64 dtl_idx; // Dispatch Trace Log head idx x98-x9F - u8 reserved9[96]; // Reserved xA0-xFF + /* cacheline 1 contains read-only data */ + + u32 desc; /* Eye catcher 0xD397D781 */ + u16 size; /* Size of this struct */ + u16 reserved1; + u16 reserved2:14; + u8 shared_proc:1; /* Shared processor indicator */ + u8 secondary_thread:1; /* Secondary thread indicator */ + u8 reserved3[14]; + volatile u32 dyn_hw_node_id; /* Dynamic hardware node id */ + volatile u32 dyn_hw_proc_id; /* Dynamic hardware proc id */ + u8 reserved4[56]; + volatile u8 vphn_assoc_counts[8]; /* Virtual processor home node */ + /* associativity change counters */ + u8 reserved5[32]; + + /* cacheline 2 contains local read-write data */ + + u8 reserved6[48]; + u8 cede_latency_hint; + u8 reserved7[7]; + u8 dtl_enable_mask; /* Dispatch Trace Log mask */ + u8 donate_dedicated_cpu; /* Donate dedicated CPU cycles */ + u8 fpregs_in_use; + u8 pmcregs_in_use; + u8 reserved8[28]; + u64 wait_state_cycles; /* Wait cycles for this proc */ + u8 reserved9[28]; + u16 slb_count; /* # of SLBs to maintain */ + u8 idle; /* Indicate OS is idle */ + u8 vmxregs_in_use; + + /* cacheline 3 is shared with other processors */ + + /* + * This is the yield_count. An "odd" value (low bit on) means that + * the processor is yielded (either because of an OS yield or a + * hypervisor preempt). An even value implies that the processor is + * currently executing. + * NOTE: This value will ALWAYS be zero for dedicated processors and + * will NEVER be zero for shared processors (ie, initialized to a 1). + */ + volatile u32 yield_count; + volatile u32 dispersion_count; /* dispatch changed physical cpu */ + volatile u64 cmo_faults; /* CMO page fault count */ + volatile u64 cmo_fault_time; /* CMO page fault time */ + u8 reserved10[104]; + + /* cacheline 4-5 */ + + u32 page_ins; /* CMO Hint - # page ins by OS */ + u8 reserved11[148]; + volatile u64 dtl_idx; /* Dispatch Trace Log head index */ + u8 reserved12[96]; } __attribute__((__aligned__(0x400))); extern struct lppaca lppaca[]; @@ -172,13 +112,13 @@ extern struct lppaca lppaca[]; * ESID is stored in the lower 64bits, then the VSID. */ struct slb_shadow { - u32 persistent; // Number of persistent SLBs x00-x03 - u32 buffer_length; // Total shadow buffer length x04-x07 - u64 reserved; // Alignment x08-x0f + u32 persistent; /* Number of persistent SLBs */ + u32 buffer_length; /* Total shadow buffer length */ + u64 reserved; struct { u64 esid; u64 vsid; - } save_area[SLB_NUM_BOLTED]; // x10-x40 + } save_area[SLB_NUM_BOLTED]; } ____cacheline_aligned; extern struct slb_shadow slb_shadow[]; diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h index 233f9ecae761..f5117674bf92 100644 --- a/arch/powerpc/include/asm/lv1call.h +++ b/arch/powerpc/include/asm/lv1call.h @@ -265,8 +265,8 @@ LV1_CALL(get_spe_irq_outlet, 2, 1, 78 ) LV1_CALL(set_spe_privilege_state_area_1_register, 3, 0, 79 ) LV1_CALL(create_repository_node, 6, 0, 90 ) LV1_CALL(read_repository_node, 5, 2, 91 ) -LV1_CALL(modify_repository_node_value, 6, 0, 92 ) -LV1_CALL(remove_repository_node, 4, 0, 93 ) +LV1_CALL(write_repository_node, 6, 0, 92 ) +LV1_CALL(delete_repository_node, 4, 0, 93 ) LV1_CALL(read_htab_entries, 2, 5, 95 ) LV1_CALL(set_dabr, 2, 0, 96 ) LV1_CALL(get_total_execution_time, 2, 1, 103 ) diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index c65b9294376e..c9f698a994be 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -275,9 +275,6 @@ struct mpic unsigned int isu_mask; /* Number of sources */ unsigned int num_sources; - /* default senses array */ - unsigned char *senses; - unsigned int senses_count; /* vector numbers used for internal sources (ipi/timers) */ unsigned int ipi_vecs[4]; @@ -415,21 +412,6 @@ extern struct mpic *mpic_alloc(struct device_node *node, extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, phys_addr_t phys_addr); -/* Set default sense codes - * - * @mpic: controller - * @senses: array of sense codes - * @count: size of above array - * - * Optionally provide an array (indexed on hardware interrupt numbers - * for this MPIC) of default sense codes for the chip. Those are linux - * sense codes IRQ_TYPE_* - * - * The driver gets ownership of the pointer, don't dispose of it or - * anything like that. __init only. - */ -extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count); - /* Initialize the controller. After this has been called, none of the above * should be called again for this mpic diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h index 3ec37dc9003e..326d33ca55cd 100644 --- a/arch/powerpc/include/asm/mpic_msgr.h +++ b/arch/powerpc/include/asm/mpic_msgr.h @@ -13,6 +13,7 @@ #include <linux/types.h> #include <linux/spinlock.h> +#include <asm/smp.h> struct mpic_msgr { u32 __iomem *base; diff --git a/arch/powerpc/include/asm/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h index 23cd6cc30bcf..c07edfe98b98 100644 --- a/arch/powerpc/include/asm/pSeries_reconfig.h +++ b/arch/powerpc/include/asm/pSeries_reconfig.h @@ -13,6 +13,18 @@ #define PSERIES_RECONFIG_REMOVE 0x0002 #define PSERIES_DRCONF_MEM_ADD 0x0003 #define PSERIES_DRCONF_MEM_REMOVE 0x0004 +#define PSERIES_UPDATE_PROPERTY 0x0005 + +/** + * pSeries_reconfig_notify - Notifier value structure for OFDT property updates + * + * @node: Device tree node which owns the property being updated + * @property: Updated property + */ +struct pSeries_reconfig_prop_update { + struct device_node *node; + struct property *property; +}; #ifdef CONFIG_PPC_PSERIES extern int pSeries_reconfig_notifier_register(struct notifier_block *); diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 50f73aa2ba21..15444204a3a1 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -369,7 +369,15 @@ BEGIN_FTR_SECTION \ END_FTR_SECTION_IFCLR(CPU_FTR_601) #endif - +#ifdef CONFIG_PPC64 +#define MTOCRF(FXM, RS) \ + BEGIN_FTR_SECTION_NESTED(848); \ + mtcrf (FXM), (RS); \ + FTR_SECTION_ELSE_NESTED(848); \ + mtocrf (FXM), (RS); \ + ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848) +#endif + /* * This instruction is not implemented on the PPC 603 or 601; however, on * the 403GCX and 405GP tlbia IS defined and tlbie is not. diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 8e2d0371fe1e..55e85631c42e 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -74,9 +74,6 @@ struct task_struct; void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp); void release_thread(struct task_struct *); -/* Prepare to copy thread state - unlazy all lazy status */ -extern void prepare_to_copy(struct task_struct *tsk); - /* Create a new kernel thread. */ extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); @@ -386,7 +383,6 @@ extern unsigned long cpuidle_disable; enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF}; extern int powersave_nap; /* set if nap mode can be used in idle loop */ -void cpu_idle_wait(void); #ifdef CONFIG_PSERIES_IDLE extern void update_smt_snooze_delay(int snooze); diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index 84cc7840cd18..9c21ed42aba6 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -354,12 +354,6 @@ static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, #define PTRACE_GETREGS64 22 #define PTRACE_SETREGS64 23 -/* (old) PTRACE requests with inverted arguments */ -#define PPC_PTRACE_GETREGS 0x99 /* Get GPRs 0 - 31 */ -#define PPC_PTRACE_SETREGS 0x98 /* Set GPRs 0 - 31 */ -#define PPC_PTRACE_GETFPREGS 0x97 /* Get FPRs 0 - 31 */ -#define PPC_PTRACE_SETFPREGS 0x96 /* Set FPRs 0 - 31 */ - /* Calls to trace a 64bit program from a 32bit program */ #define PPC_PTRACE_PEEKTEXT_3264 0x95 #define PPC_PTRACE_PEEKDATA_3264 0x94 diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index b86faa9107da..8a97aa7289d3 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -15,11 +15,6 @@ #ifndef __ASM_POWERPC_REG_BOOKE_H__ #define __ASM_POWERPC_REG_BOOKE_H__ -#ifdef CONFIG_BOOKE_WDT -extern u32 booke_wdt_enabled; -extern u32 booke_wdt_period; -#endif /* CONFIG_BOOKE_WDT */ - /* Machine State Register (MSR) Fields */ #define MSR_GS (1<<28) /* Guest state */ #define MSR_UCLE (1<<26) /* User-mode cache lock enable */ diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h index caf82d0a00de..1a6320290d26 100644 --- a/arch/powerpc/include/asm/switch_to.h +++ b/arch/powerpc/include/asm/switch_to.h @@ -21,7 +21,6 @@ extern void disable_kernel_fp(void); extern void enable_kernel_fp(void); extern void flush_fp_to_thread(struct task_struct *); extern void enable_kernel_altivec(void); -extern void giveup_altivec(struct task_struct *); extern void load_up_altivec(struct task_struct *); extern int emulate_altivec(struct pt_regs *); extern void __giveup_vsx(struct task_struct *); @@ -40,10 +39,15 @@ static inline void discard_lazy_cpu_state(void) #ifdef CONFIG_ALTIVEC extern void flush_altivec_to_thread(struct task_struct *); +extern void giveup_altivec(struct task_struct *); +extern void giveup_altivec_notask(void); #else static inline void flush_altivec_to_thread(struct task_struct *t) { } +static inline void giveup_altivec(struct task_struct *t) +{ +} #endif #ifdef CONFIG_VSX diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index 4a741c7efd02..a556ccc16b58 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -62,21 +62,8 @@ struct thread_info { #define init_thread_info (init_thread_union.thread_info) #define init_stack (init_thread_union.stack) -/* thread information allocation */ - -#if THREAD_SHIFT >= PAGE_SHIFT - #define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT) -#else /* THREAD_SHIFT < PAGE_SHIFT */ - -#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR - -extern struct thread_info *alloc_thread_info_node(struct task_struct *tsk, int node); -extern void free_thread_info(struct thread_info *ti); - -#endif /* THREAD_SHIFT < PAGE_SHIFT */ - /* how to get the thread information struct from C */ static inline struct thread_info *current_thread_info(void) { @@ -126,7 +113,6 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_NOERROR (1<<TIF_NOERROR) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) #define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT) -#define _TIF_RUNLATCH (1<<TIF_RUNLATCH) #define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ _TIF_SECCOMP | _TIF_SYSCALL_TRACEPOINT) diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index c97185885c6d..852ed1b384f6 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -18,12 +18,6 @@ struct device_node; */ #define RECLAIM_DISTANCE 10 -/* - * Avoid creating an extra level of balancing (SD_ALLNODES) on the largest - * POWER7 boxes which have a maximum of 32 nodes. - */ -#define SD_NODES_PER_DOMAIN 32 - #include <asm/mmzone.h> static inline int cpu_to_node(int cpu) @@ -51,36 +45,6 @@ static inline int pcibus_to_node(struct pci_bus *bus) cpu_all_mask : \ cpumask_of_node(pcibus_to_node(bus))) -/* sched_domains SD_NODE_INIT for PPC64 machines */ -#define SD_NODE_INIT (struct sched_domain) { \ - .min_interval = 8, \ - .max_interval = 32, \ - .busy_factor = 32, \ - .imbalance_pct = 125, \ - .cache_nice_tries = 1, \ - .busy_idx = 3, \ - .idle_idx = 1, \ - .newidle_idx = 0, \ - .wake_idx = 0, \ - .forkexec_idx = 0, \ - \ - .flags = 1*SD_LOAD_BALANCE \ - | 0*SD_BALANCE_NEWIDLE \ - | 1*SD_BALANCE_EXEC \ - | 1*SD_BALANCE_FORK \ - | 0*SD_BALANCE_WAKE \ - | 1*SD_WAKE_AFFINE \ - | 0*SD_PREFER_LOCAL \ - | 0*SD_SHARE_CPUPOWER \ - | 0*SD_POWERSAVINGS_BALANCE \ - | 0*SD_SHARE_PKG_RESOURCES \ - | 1*SD_SERIALIZE \ - | 0*SD_PREFER_SIBLING \ - , \ - .last_balance = jiffies, \ - .balance_interval = 1, \ -} - extern int __node_distance(int, int); #define node_distance(a, b) __node_distance(a, b) diff --git a/arch/powerpc/include/asm/vio.h b/arch/powerpc/include/asm/vio.h index 6bfd5ffe1d4f..b19adf751dd9 100644 --- a/arch/powerpc/include/asm/vio.h +++ b/arch/powerpc/include/asm/vio.h @@ -46,6 +46,48 @@ struct iommu_table; +/* + * Platform Facilities Option (PFO)-specific data + */ + +/* Starting unit address for PFO devices on the VIO BUS */ +#define VIO_BASE_PFO_UA 0x50000000 + +/** + * vio_pfo_op - PFO operation parameters + * + * @flags: h_call subfunctions and modifiers + * @in: Input data block logical real address + * @inlen: If non-negative, the length of the input data block. If negative, + * the length of the input data descriptor list in bytes. + * @out: Output data block logical real address + * @outlen: If non-negative, the length of the input data block. If negative, + * the length of the input data descriptor list in bytes. + * @csbcpb: Logical real address of the 4k naturally-aligned storage block + * containing the CSB & optional FC field specific CPB + * @timeout: # of milliseconds to retry h_call, 0 for no timeout. + * @hcall_err: pointer to return the h_call return value, else NULL + */ +struct vio_pfo_op { + u64 flags; + s64 in; + s64 inlen; + s64 out; + s64 outlen; + u64 csbcpb; + void *done; + unsigned long handle; + unsigned int timeout; + long hcall_err; +}; + +/* End PFO specific data */ + +enum vio_dev_family { + VDEVICE, /* The OF node is a child of /vdevice */ + PFO, /* The OF node is a child of /ibm,platform-facilities */ +}; + /** * vio_dev - This structure is used to describe virtual I/O devices. * @@ -58,6 +100,7 @@ struct vio_dev { const char *name; const char *type; uint32_t unit_address; + uint32_t resource_id; unsigned int irq; struct { size_t desired; @@ -65,6 +108,7 @@ struct vio_dev { size_t allocated; atomic_t allocs_failed; } cmo; + enum vio_dev_family family; struct device dev; }; @@ -95,6 +139,8 @@ extern void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired); extern void __devinit vio_unregister_device(struct vio_dev *dev); +extern int vio_h_cop_sync(struct vio_dev *vdev, struct vio_pfo_op *op); + struct device_node; extern struct vio_dev *vio_register_device_node( diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index f5808a35688c..83afacd3ba7b 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -28,7 +28,7 @@ endif obj-y := cputable.o ptrace.o syscalls.o \ irq.o align.o signal_32.o pmc.o vdso.o \ - init_task.o process.o systbl.o idle.o \ + process.o systbl.o idle.o \ signal.o sysfs.o cacheinfo.o time.o \ prom.o traps.o setup-common.o \ udbg.o misc.o io.o dma.o \ diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 34b8afe94a50..4554dc2fe857 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -188,10 +188,6 @@ int main(void) DEFINE(SLBSHADOW_STACKESID, offsetof(struct slb_shadow, save_area[SLB_NUM_BOLTED - 1].esid)); DEFINE(SLBSHADOW_SAVEAREA, offsetof(struct slb_shadow, save_area)); - DEFINE(LPPACASRR0, offsetof(struct lppaca, saved_srr0)); - DEFINE(LPPACASRR1, offsetof(struct lppaca, saved_srr1)); - DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int)); - DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int)); DEFINE(LPPACA_PMCINUSE, offsetof(struct lppaca, pmcregs_in_use)); DEFINE(LPPACA_DTLIDX, offsetof(struct lppaca, dtl_idx)); DEFINE(LPPACA_YIELDCOUNT, offsetof(struct lppaca, yield_count)); diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 3f6464b4d970..bcfdcd22c766 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -17,7 +17,8 @@ * to the dma address (mapping) of the first page. */ static void *dma_iommu_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) { return iommu_alloc_coherent(dev, get_iommu_table_base(dev), size, dma_handle, dev->coherent_dma_mask, flag, @@ -25,7 +26,8 @@ static void *dma_iommu_alloc_coherent(struct device *dev, size_t size, } static void dma_iommu_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs) { iommu_free_coherent(get_iommu_table_base(dev), size, vaddr, dma_handle); } @@ -105,8 +107,8 @@ static u64 dma_iommu_get_required_mask(struct device *dev) } struct dma_map_ops dma_iommu_ops = { - .alloc_coherent = dma_iommu_alloc_coherent, - .free_coherent = dma_iommu_free_coherent, + .alloc = dma_iommu_alloc_coherent, + .free = dma_iommu_free_coherent, .map_sg = dma_iommu_map_sg, .unmap_sg = dma_iommu_unmap_sg, .dma_supported = dma_iommu_dma_supported, diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index 1ebc9189aada..4ab88dafb235 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -47,8 +47,8 @@ static u64 swiotlb_powerpc_get_required(struct device *dev) * for everything else. */ struct dma_map_ops swiotlb_dma_ops = { - .alloc_coherent = dma_direct_alloc_coherent, - .free_coherent = dma_direct_free_coherent, + .alloc = dma_direct_alloc_coherent, + .free = dma_direct_free_coherent, .map_sg = swiotlb_map_sg_attrs, .unmap_sg = swiotlb_unmap_sg_attrs, .dma_supported = swiotlb_dma_supported, diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 7d0233c12ee3..b1ec983dcec8 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -26,7 +26,8 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) { void *ret; #ifdef CONFIG_NOT_COHERENT_CACHE @@ -54,7 +55,8 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size, } void dma_direct_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs) { #ifdef CONFIG_NOT_COHERENT_CACHE __dma_free_coherent(size, vaddr); @@ -150,8 +152,8 @@ static inline void dma_direct_sync_single(struct device *dev, #endif struct dma_map_ops dma_direct_ops = { - .alloc_coherent = dma_direct_alloc_coherent, - .free_coherent = dma_direct_free_coherent, + .alloc = dma_direct_alloc_coherent, + .free = dma_direct_free_coherent, .map_sg = dma_direct_map_sg, .unmap_sg = dma_direct_unmap_sg, .dma_supported = dma_direct_dma_supported, diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 3e57a00b8cba..ba3aeb4bc06a 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -206,40 +206,43 @@ reenable_mmu: /* re-enable mmu so we can */ andi. r10,r10,MSR_EE /* Did EE change? */ beq 1f - /* Save handler and return address into the 2 unused words - * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything - * else can be recovered from the pt_regs except r3 which for - * normal interrupts has been set to pt_regs and for syscalls - * is an argument, so we temporarily use ORIG_GPR3 to save it - */ - stw r9,8(r1) - stw r11,12(r1) - stw r3,ORIG_GPR3(r1) /* * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1. * If from user mode there is only one stack frame on the stack, and * accessing CALLER_ADDR1 will cause oops. So we need create a dummy * stack frame to make trace_hardirqs_off happy. + * + * This is handy because we also need to save a bunch of GPRs, + * r3 can be different from GPR3(r1) at this point, r9 and r11 + * contains the old MSR and handler address respectively, + * r4 & r5 can contain page fault arguments that need to be passed + * along as well. r12, CCR, CTR, XER etc... are left clobbered as + * they aren't useful past this point (aren't syscall arguments), + * the rest is restored from the exception frame. */ + stwu r1,-32(r1) + stw r9,8(r1) + stw r11,12(r1) + stw r3,16(r1) + stw r4,20(r1) + stw r5,24(r1) andi. r12,r12,MSR_PR - beq 11f - stwu r1,-16(r1) + b 11f bl trace_hardirqs_off - addi r1,r1,16 b 12f - 11: bl trace_hardirqs_off 12: + lwz r5,24(r1) + lwz r4,20(r1) + lwz r3,16(r1) + lwz r11,12(r1) + lwz r9,8(r1) + addi r1,r1,32 lwz r0,GPR0(r1) - lwz r3,ORIG_GPR3(r1) - lwz r4,GPR4(r1) - lwz r5,GPR5(r1) lwz r6,GPR6(r1) lwz r7,GPR7(r1) lwz r8,GPR8(r1) - lwz r9,8(r1) - lwz r11,12(r1) 1: mtctr r11 mtlr r9 bctr /* jump to handler */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index f8a7a1a1a9f4..ed1718feb9d9 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -63,15 +63,9 @@ system_call_common: std r0,GPR0(r1) std r10,GPR1(r1) ACCOUNT_CPU_USER_ENTRY(r10, r11) - /* - * This "crclr so" clears CR0.SO, which is the error indication on - * return from this system call. There must be no cmp instruction - * between it and the "mfcr r9" below, otherwise if XER.SO is set, - * CR0.SO will get set, causing all system calls to appear to fail. - */ - crclr so std r2,GPR2(r1) std r3,GPR3(r1) + mfcr r2 std r4,GPR4(r1) std r5,GPR5(r1) std r6,GPR6(r1) @@ -82,18 +76,20 @@ system_call_common: std r11,GPR10(r1) std r11,GPR11(r1) std r11,GPR12(r1) + std r11,_XER(r1) + std r11,_CTR(r1) std r9,GPR13(r1) - mfcr r9 mflr r10 + /* + * This clears CR0.SO (bit 28), which is the error indication on + * return from this system call. + */ + rldimi r2,r11,28,(63-28) li r11,0xc01 - std r9,_CCR(r1) std r10,_LINK(r1) std r11,_TRAP(r1) - mfxer r9 - mfctr r10 - std r9,_XER(r1) - std r10,_CTR(r1) std r3,ORIG_GPR3(r1) + std r2,_CCR(r1) ld r2,PACATOC(r13) addi r9,r1,STACK_FRAME_OVERHEAD ld r11,exception_marker@toc(r2) @@ -154,7 +150,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) ld r10,TI_FLAGS(r11) andi. r11,r10,_TIF_SYSCALL_T_OR_A bne- syscall_dotrace -syscall_dotrace_cont: +.Lsyscall_dotrace_cont: cmpldi 0,r0,NR_syscalls bge- syscall_enosys @@ -211,7 +207,7 @@ syscall_exit: cmpld r3,r11 ld r5,_CCR(r1) bge- syscall_error -syscall_error_cont: +.Lsyscall_error_cont: ld r7,_NIP(r1) BEGIN_FTR_SECTION stdcx. r0,0,r1 /* to clear the reservation */ @@ -246,7 +242,7 @@ syscall_error: oris r5,r5,0x1000 /* Set SO bit in CR */ neg r3,r3 std r5,_CCR(r1) - b syscall_error_cont + b .Lsyscall_error_cont /* Traced system call support */ syscall_dotrace: @@ -268,7 +264,7 @@ syscall_dotrace: addi r9,r1,STACK_FRAME_OVERHEAD clrrdi r10,r1,THREAD_SHIFT ld r10,TI_FLAGS(r10) - b syscall_dotrace_cont + b .Lsyscall_dotrace_cont syscall_enosys: li r3,-ENOSYS @@ -588,23 +584,19 @@ _GLOBAL(ret_from_except_lite) fast_exc_return_irq: restore: /* - * This is the main kernel exit path, we first check if we - * have to change our interrupt state. + * This is the main kernel exit path. First we check if we + * are about to re-enable interrupts */ ld r5,SOFTE(r1) lbz r6,PACASOFTIRQEN(r13) - cmpwi cr1,r5,0 - cmpw cr0,r5,r6 - beq cr0,4f + cmpwi cr0,r5,0 + beq restore_irq_off - /* We do, handle disable first, which is easy */ - bne cr1,3f; - li r0,0 - stb r0,PACASOFTIRQEN(r13); - TRACE_DISABLE_INTS - b 4f + /* We are enabling, were we already enabled ? Yes, just return */ + cmpwi cr0,r6,1 + beq cr0,do_restore -3: /* + /* * We are about to soft-enable interrupts (we are hard disabled * at this point). We check if there's anything that needs to * be replayed first. @@ -626,7 +618,7 @@ restore_no_replay: /* * Final return path. BookE is handled in a different file */ -4: +do_restore: #ifdef CONFIG_PPC_BOOK3E b .exception_return_book3e #else @@ -700,6 +692,25 @@ fast_exception_return: #endif /* CONFIG_PPC_BOOK3E */ /* + * We are returning to a context with interrupts soft disabled. + * + * However, we may also about to hard enable, so we need to + * make sure that in this case, we also clear PACA_IRQ_HARD_DIS + * or that bit can get out of sync and bad things will happen + */ +restore_irq_off: + ld r3,_MSR(r1) + lbz r7,PACAIRQHAPPENED(r13) + andi. r0,r3,MSR_EE + beq 1f + rlwinm r7,r7,0,~PACA_IRQ_HARD_DIS + stb r7,PACAIRQHAPPENED(r13) +1: li r0,0 + stb r0,PACASOFTIRQEN(r13); + TRACE_DISABLE_INTS + b do_restore + + /* * Something did happen, check if a re-emit is needed * (this also clears paca->irq_happened) */ @@ -748,6 +759,9 @@ restore_check_irq_replay: #endif /* CONFIG_PPC_BOOK3E */ 1: b .ret_from_except /* What else to do here ? */ + + +3: do_work: #ifdef CONFIG_PREEMPT andi. r0,r3,MSR_PR /* Returning to user mode? */ @@ -767,16 +781,6 @@ do_work: SOFT_DISABLE_INTS(r3,r4) 1: bl .preempt_schedule_irq - /* Hard-disable interrupts again (and update PACA) */ -#ifdef CONFIG_PPC_BOOK3E - wrteei 0 -#else - ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */ - mtmsrd r10,1 -#endif /* CONFIG_PPC_BOOK3E */ - li r0,PACA_IRQ_HARD_DIS - stb r0,PACAIRQHAPPENED(r13) - /* Re-test flags and eventually loop */ clrrdi r9,r1,THREAD_SHIFT ld r4,TI_FLAGS(r9) @@ -787,14 +791,6 @@ do_work: user_work: #endif /* CONFIG_PREEMPT */ - /* Enable interrupts */ -#ifdef CONFIG_PPC_BOOK3E - wrteei 1 -#else - ori r10,r10,MSR_EE - mtmsrd r10,1 -#endif /* CONFIG_PPC_BOOK3E */ - andi. r0,r4,_TIF_NEED_RESCHED beq 1f bl .restore_interrupts diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index cb705fdbb458..f7bed44ee165 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -94,12 +94,10 @@ machine_check_pSeries_1: data_access_pSeries: HMT_MEDIUM SET_SCRATCH0(r13) -#ifndef CONFIG_POWER4_ONLY BEGIN_FTR_SECTION b data_access_check_stab data_access_not_stab: END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB) -#endif EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common, EXC_STD, KVMTEST, 0x300) @@ -301,7 +299,6 @@ machine_check_fwnmi: EXC_STD, KVMTEST, 0x200) KVM_HANDLER_SKIP(PACA_EXMC, EXC_STD, 0x200) -#ifndef CONFIG_POWER4_ONLY /* moved from 0x300 */ data_access_check_stab: GET_PACA(r13) @@ -328,7 +325,6 @@ do_stab_bolted_pSeries: GET_SCRATCH0(r10) std r10,PACA_EXSLB+EX_R13(r13) EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted, EXC_STD) -#endif /* CONFIG_POWER4_ONLY */ KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300) KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380) @@ -768,8 +764,8 @@ alignment_common: std r3,_DAR(r1) std r4,_DSISR(r1) bl .save_nvgprs + DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS bl .alignment_exception b .ret_from_except diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c index cfe7a38708c3..18bdf74fa164 100644 --- a/arch/powerpc/kernel/fadump.c +++ b/arch/powerpc/kernel/fadump.c @@ -40,6 +40,8 @@ #include <asm/prom.h> #include <asm/rtas.h> #include <asm/fadump.h> +#include <asm/debug.h> +#include <asm/setup.h> static struct fw_dump fw_dump; static struct fadump_mem_struct fdm; diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index 7dd2981bcc50..22d608e8bb7d 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -778,14 +778,6 @@ _GLOBAL(__fixup_440A_mcheck) blr /* - * extern void giveup_altivec(struct task_struct *prev) - * - * The 44x core does not have an AltiVec unit. - */ -_GLOBAL(giveup_altivec) - blr - -/* * extern void giveup_fpu(struct task_struct *prev) * * The 44x core does not have an FPU. diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 28e62598d0e8..de80e0f9a2bd 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -874,14 +874,6 @@ _GLOBAL(__setup_e500mc_ivors) sync blr -/* - * extern void giveup_altivec(struct task_struct *prev) - * - * The e500 core does not have an AltiVec unit. - */ -_GLOBAL(giveup_altivec) - blr - #ifdef CONFIG_SPE /* * extern void giveup_spe(struct task_struct *prev) diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 79bb282e6501..b01d14eeca8d 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -65,7 +65,8 @@ static struct of_device_id __initdata ibmebus_matches[] = { static void *ibmebus_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - gfp_t flag) + gfp_t flag, + struct dma_attrs *attrs) { void *mem; @@ -77,7 +78,8 @@ static void *ibmebus_alloc_coherent(struct device *dev, static void ibmebus_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) + dma_addr_t dma_handle, + struct dma_attrs *attrs) { kfree(vaddr); } @@ -136,8 +138,8 @@ static u64 ibmebus_dma_get_required_mask(struct device *dev) } static struct dma_map_ops ibmebus_dma_ops = { - .alloc_coherent = ibmebus_alloc_coherent, - .free_coherent = ibmebus_free_coherent, + .alloc = ibmebus_alloc_coherent, + .free = ibmebus_free_coherent, .map_sg = ibmebus_map_sg, .unmap_sg = ibmebus_unmap_sg, .dma_supported = ibmebus_dma_supported, diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index 6d2209ac0c44..2099d9a879e8 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -113,29 +113,6 @@ void cpu_idle(void) } } - -/* - * cpu_idle_wait - Used to ensure that all the CPUs come out of the old - * idle loop and start using the new idle loop. - * Required while changing idle handler on SMP systems. - * Caller must have changed idle handler to the new value before the call. - * This window may be larger on shared systems. - */ -void cpu_idle_wait(void) -{ - int cpu; - smp_mb(); - - /* kick all the CPUs so that they exit out of old idle routine */ - get_online_cpus(); - for_each_online_cpu(cpu) { - if (cpu != smp_processor_id()) - smp_send_reschedule(cpu); - } - put_online_cpus(); -} -EXPORT_SYMBOL_GPL(cpu_idle_wait); - int powersave_nap; #ifdef CONFIG_SYSCTL diff --git a/arch/powerpc/kernel/init_task.c b/arch/powerpc/kernel/init_task.c deleted file mode 100644 index d076d465dbd1..000000000000 --- a/arch/powerpc/kernel/init_task.c +++ /dev/null @@ -1,29 +0,0 @@ -#include <linux/mm.h> -#include <linux/export.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/init_task.h> -#include <linux/fs.h> -#include <linux/mqueue.h> -#include <asm/uaccess.h> - -static struct signal_struct init_signals = INIT_SIGNALS(init_signals); -static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); -/* - * Initial thread structure. - * - * We need to make sure that this is 16384-byte aligned due to the - * way process stacks are handled. This is done by having a special - * "init_task" linker map entry.. - */ -union thread_union init_thread_union __init_task_data = - { INIT_THREAD_INFO(init_task) }; - -/* - * Initial task structure. - * - * All other task structs will be allocated on slabs in fork.c - */ -struct task_struct init_task = INIT_TASK(init_task); - -EXPORT_SYMBOL(init_task); diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 243dbabfe74d..7835a5e1ea5f 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -229,6 +229,19 @@ notrace void arch_local_irq_restore(unsigned long en) */ if (unlikely(irq_happened != PACA_IRQ_HARD_DIS)) __hard_irq_disable(); +#ifdef CONFIG_TRACE_IRQFLAG + else { + /* + * We should already be hard disabled here. We had bugs + * where that wasn't the case so let's dbl check it and + * warn if we are wrong. Only do that when IRQ tracing + * is enabled as mfmsr() can be costly. + */ + if (WARN_ON(mfmsr() & MSR_EE)) + __hard_irq_disable(); + } +#endif /* CONFIG_TRACE_IRQFLAG */ + set_soft_enabled(0); /* @@ -260,11 +273,17 @@ EXPORT_SYMBOL(arch_local_irq_restore); * if they are currently disabled. This is typically called before * schedule() or do_signal() when returning to userspace. We do it * in C to avoid the burden of dealing with lockdep etc... + * + * NOTE: This is called with interrupts hard disabled but not marked + * as such in paca->irq_happened, so we need to resync this. */ void restore_interrupts(void) { - if (irqs_disabled()) + if (irqs_disabled()) { + local_paca->irq_happened |= PACA_IRQ_HARD_DIS; local_irq_enable(); + } else + __hard_irq_enable(); } #endif /* CONFIG_PPC64 */ @@ -330,14 +349,10 @@ void migrate_irqs(void) alloc_cpumask_var(&mask, GFP_KERNEL); - for_each_irq(irq) { + for_each_irq_desc(irq, desc) { struct irq_data *data; struct irq_chip *chip; - desc = irq_to_desc(irq); - if (!desc) - continue; - data = irq_desc_get_irq_data(desc); if (irqd_is_per_cpu(data)) continue; @@ -560,12 +575,6 @@ void do_softirq(void) local_irq_restore(flags); } -irq_hw_number_t irqd_to_hwirq(struct irq_data *d) -{ - return d->hwirq; -} -EXPORT_SYMBOL_GPL(irqd_to_hwirq); - irq_hw_number_t virq_to_hw(unsigned int virq) { struct irq_data *irq_data = irq_get_irq_data(virq); @@ -578,7 +587,7 @@ int irq_choose_cpu(const struct cpumask *mask) { int cpuid; - if (cpumask_equal(mask, cpu_all_mask)) { + if (cpumask_equal(mask, cpu_online_mask)) { static int irq_rover; static DEFINE_RAW_SPINLOCK(irq_rover_lock); unsigned long flags; diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 76a6e40a6f7c..782bd0a3c2f0 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -24,6 +24,7 @@ #include <asm/current.h> #include <asm/processor.h> #include <asm/machdep.h> +#include <asm/debug.h> /* * This table contains the mapping between PowerPC hardware trap types, and diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index c957b1202bdc..5df777794403 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -23,14 +23,11 @@ void machine_kexec_mask_interrupts(void) { unsigned int i; + struct irq_desc *desc; - for_each_irq(i) { - struct irq_desc *desc = irq_to_desc(i); + for_each_irq_desc(i, desc) { struct irq_chip *chip; - if (!desc) - continue; - chip = irq_desc_get_chip(desc); if (!chip) continue; diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 7cd07b42ca1a..386d57f66f28 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -738,8 +738,23 @@ relocate_new_kernel: mr r5, r31 li r0, 0 -#elif defined(CONFIG_44x) && !defined(CONFIG_PPC_47x) +#elif defined(CONFIG_44x) + /* Save our parameters */ + mr r29, r3 + mr r30, r4 + mr r31, r5 + +#ifdef CONFIG_PPC_47x + /* Check for 47x cores */ + mfspr r3,SPRN_PVR + srwi r3,r3,16 + cmplwi cr0,r3,PVR_476@h + beq setup_map_47x + cmplwi cr0,r3,PVR_476_ISS@h + beq setup_map_47x +#endif /* CONFIG_PPC_47x */ + /* * Code for setting up 1:1 mapping for PPC440x for KEXEC * @@ -753,16 +768,15 @@ relocate_new_kernel: * 5) Invalidate the tmp mapping. * * - Based on the kexec support code for FSL BookE - * - Doesn't support 47x yet. * */ - /* Save our parameters */ - mr r29, r3 - mr r30, r4 - mr r31, r5 - /* Load our MSR_IS and TID to MMUCR for TLB search */ - mfspr r3,SPRN_PID + /* + * Load the PID with kernel PID (0). + * Also load our MSR_IS and TID to MMUCR for TLB search. + */ + li r3, 0 + mtspr SPRN_PID, r3 mfmsr r4 andi. r4,r4,MSR_IS@l beq wmmucr @@ -900,6 +914,179 @@ next_tlb: li r3, 0 tlbwe r3, r24, PPC44x_TLB_PAGEID sync + b ppc44x_map_done + +#ifdef CONFIG_PPC_47x + + /* 1:1 mapping for 47x */ + +setup_map_47x: + + /* + * Load the kernel pid (0) to PID and also to MMUCR[TID]. + * Also set the MSR IS->MMUCR STS + */ + li r3, 0 + mtspr SPRN_PID, r3 /* Set PID */ + mfmsr r4 /* Get MSR */ + andi. r4, r4, MSR_IS@l /* TS=1? */ + beq 1f /* If not, leave STS=0 */ + oris r3, r3, PPC47x_MMUCR_STS@h /* Set STS=1 */ +1: mtspr SPRN_MMUCR, r3 /* Put MMUCR */ + sync + + /* Find the entry we are running from */ + bl 2f +2: mflr r23 + tlbsx r23, 0, r23 + tlbre r24, r23, 0 /* TLB Word 0 */ + tlbre r25, r23, 1 /* TLB Word 1 */ + tlbre r26, r23, 2 /* TLB Word 2 */ + + + /* + * Invalidates all the tlb entries by writing to 256 RPNs(r4) + * of 4k page size in all 4 ways (0-3 in r3). + * This would invalidate the entire UTLB including the one we are + * running from. However the shadow TLB entries would help us + * to continue the execution, until we flush them (rfi/isync). + */ + addis r3, 0, 0x8000 /* specify the way */ + addi r4, 0, 0 /* TLB Word0 = (EPN=0, VALID = 0) */ + addi r5, 0, 0 + b clear_utlb_entry + + /* Align the loop to speed things up. from head_44x.S */ + .align 6 + +clear_utlb_entry: + + tlbwe r4, r3, 0 + tlbwe r5, r3, 1 + tlbwe r5, r3, 2 + addis r3, r3, 0x2000 /* Increment the way */ + cmpwi r3, 0 + bne clear_utlb_entry + addis r3, 0, 0x8000 + addis r4, r4, 0x100 /* Increment the EPN */ + cmpwi r4, 0 + bne clear_utlb_entry + + /* Create the entries in the other address space */ + mfmsr r5 + rlwinm r7, r5, 27, 31, 31 /* Get the TS (Bit 26) from MSR */ + xori r7, r7, 1 /* r7 = !TS */ + + insrwi r24, r7, 1, 21 /* Change the TS in the saved TLB word 0 */ + + /* + * write out the TLB entries for the tmp mapping + * Use way '0' so that we could easily invalidate it later. + */ + lis r3, 0x8000 /* Way '0' */ + + tlbwe r24, r3, 0 + tlbwe r25, r3, 1 + tlbwe r26, r3, 2 + + /* Update the msr to the new TS */ + insrwi r5, r7, 1, 26 + + bl 1f +1: mflr r6 + addi r6, r6, (2f-1b) + + mtspr SPRN_SRR0, r6 + mtspr SPRN_SRR1, r5 + rfi + + /* + * Now we are in the tmp address space. + * Create a 1:1 mapping for 0-2GiB in the original TS. + */ +2: + li r3, 0 + li r4, 0 /* TLB Word 0 */ + li r5, 0 /* TLB Word 1 */ + li r6, 0 + ori r6, r6, PPC47x_TLB2_S_RWX /* TLB word 2 */ + + li r8, 0 /* PageIndex */ + + xori r7, r7, 1 /* revert back to original TS */ + +write_utlb: + rotlwi r5, r8, 28 /* RPN = PageIndex * 256M */ + /* ERPN = 0 as we don't use memory above 2G */ + + mr r4, r5 /* EPN = RPN */ + ori r4, r4, (PPC47x_TLB0_VALID | PPC47x_TLB0_256M) + insrwi r4, r7, 1, 21 /* Insert the TS to Word 0 */ + + tlbwe r4, r3, 0 /* Write out the entries */ + tlbwe r5, r3, 1 + tlbwe r6, r3, 2 + addi r8, r8, 1 + cmpwi r8, 8 /* Have we completed ? */ + bne write_utlb + + /* make sure we complete the TLB write up */ + isync + + /* + * Prepare to jump to the 1:1 mapping. + * 1) Extract page size of the tmp mapping + * DSIZ = TLB_Word0[22:27] + * 2) Calculate the physical address of the address + * to jump to. + */ + rlwinm r10, r24, 0, 22, 27 + + cmpwi r10, PPC47x_TLB0_4K + bne 0f + li r10, 0x1000 /* r10 = 4k */ + bl 1f + +0: + /* Defaults to 256M */ + lis r10, 0x1000 + + bl 1f +1: mflr r4 + addi r4, r4, (2f-1b) /* virtual address of 2f */ + + subi r11, r10, 1 /* offsetmask = Pagesize - 1 */ + not r10, r11 /* Pagemask = ~(offsetmask) */ + + and r5, r25, r10 /* Physical page */ + and r6, r4, r11 /* offset within the current page */ + + or r5, r5, r6 /* Physical address for 2f */ + + /* Switch the TS in MSR to the original one */ + mfmsr r8 + insrwi r8, r7, 1, 26 + + mtspr SPRN_SRR1, r8 + mtspr SPRN_SRR0, r5 + rfi + +2: + /* Invalidate the tmp mapping */ + lis r3, 0x8000 /* Way '0' */ + + clrrwi r24, r24, 12 /* Clear the valid bit */ + tlbwe r24, r3, 0 + tlbwe r25, r3, 1 + tlbwe r26, r3, 2 + + /* Make sure we complete the TLB write and flush the shadow TLB */ + isync + +#endif + +ppc44x_map_done: + /* Restore the parameters */ mr r3, r29 diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 0bb1f98613ba..fbe1a12dc7f1 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -36,10 +36,7 @@ struct lppaca lppaca[] = { [0 ... (NR_LPPACAS-1)] = { .desc = 0xd397d781, /* "LpPa" */ .size = sizeof(struct lppaca), - .dyn_proc_status = 2, - .decr_val = 0x00ff0000, .fpregs_in_use = 1, - .end_of_quantum = 0xfffffffffffffffful, .slb_count = 64, .vmxregs_in_use = 0, .page_ins = 0, diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index f88698c0f332..710f400476de 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -124,7 +124,7 @@ void enable_kernel_altivec(void) if (current->thread.regs && (current->thread.regs->msr & MSR_VEC)) giveup_altivec(current); else - giveup_altivec(NULL); /* just enable AltiVec for kernel - force */ + giveup_altivec_notask(); #else giveup_altivec(last_task_used_altivec); #endif /* CONFIG_SMP */ @@ -711,18 +711,21 @@ release_thread(struct task_struct *t) } /* - * This gets called before we allocate a new thread and copy - * the current task into it. + * this gets called so that we can store coprocessor state into memory and + * copy the current task into the new thread. */ -void prepare_to_copy(struct task_struct *tsk) +int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) { - flush_fp_to_thread(current); - flush_altivec_to_thread(current); - flush_vsx_to_thread(current); - flush_spe_to_thread(current); + flush_fp_to_thread(src); + flush_altivec_to_thread(src); + flush_vsx_to_thread(src); + flush_spe_to_thread(src); #ifdef CONFIG_HAVE_HW_BREAKPOINT - flush_ptrace_hw_breakpoint(tsk); + flush_ptrace_hw_breakpoint(src); #endif /* CONFIG_HAVE_HW_BREAKPOINT */ + + *dst = *src; + return 0; } /* @@ -1235,7 +1238,7 @@ void __ppc64_runlatch_on(void) ctrl |= CTRL_RUNLATCH; mtspr(SPRN_CTRLT, ctrl); - ti->local_flags |= TLF_RUNLATCH; + ti->local_flags |= _TLF_RUNLATCH; } /* Called with hard IRQs off */ @@ -1244,7 +1247,7 @@ void __ppc64_runlatch_off(void) struct thread_info *ti = current_thread_info(); unsigned long ctrl; - ti->local_flags &= ~TLF_RUNLATCH; + ti->local_flags &= ~_TLF_RUNLATCH; ctrl = mfspr(SPRN_CTRLF); ctrl &= ~CTRL_RUNLATCH; @@ -1252,37 +1255,6 @@ void __ppc64_runlatch_off(void) } #endif /* CONFIG_PPC64 */ -#if THREAD_SHIFT < PAGE_SHIFT - -static struct kmem_cache *thread_info_cache; - -struct thread_info *alloc_thread_info_node(struct task_struct *tsk, int node) -{ - struct thread_info *ti; - - ti = kmem_cache_alloc_node(thread_info_cache, GFP_KERNEL, node); - if (unlikely(ti == NULL)) - return NULL; -#ifdef CONFIG_DEBUG_STACK_USAGE - memset(ti, 0, THREAD_SIZE); -#endif - return ti; -} - -void free_thread_info(struct thread_info *ti) -{ - kmem_cache_free(thread_info_cache, ti); -} - -void thread_info_cache_init(void) -{ - thread_info_cache = kmem_cache_create("thread_info", THREAD_SIZE, - THREAD_SIZE, 0, NULL); - BUG_ON(thread_info_cache == NULL); -} - -#endif /* THREAD_SHIFT < PAGE_SHIFT */ - unsigned long arch_align_stack(unsigned long sp) { if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 99860273211b..1b488e5305c5 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -680,6 +680,9 @@ static void __init early_cmdline_parse(void) #define OV3_VMX 0x40 /* VMX/Altivec */ #define OV3_DFP 0x20 /* decimal FP */ +/* Option vector 4: IBM PAPR implementation */ +#define OV4_MIN_ENT_CAP 0x01 /* minimum VP entitled capacity */ + /* Option vector 5: PAPR/OF options supported */ #define OV5_LPAR 0x80 /* logical partitioning supported */ #define OV5_SPLPAR 0x40 /* shared-processor LPAR supported */ @@ -701,6 +704,8 @@ static void __init early_cmdline_parse(void) #define OV5_XCMO 0x00 #endif #define OV5_TYPE1_AFFINITY 0x80 /* Type 1 NUMA affinity */ +#define OV5_PFO_HW_RNG 0x80 /* PFO Random Number Generator */ +#define OV5_PFO_HW_ENCR 0x20 /* PFO Encryption Accelerator */ /* Option Vector 6: IBM PAPR hints */ #define OV6_LINUX 0x02 /* Linux is our OS */ @@ -744,11 +749,12 @@ static unsigned char ibm_architecture_vec[] = { OV3_FP | OV3_VMX | OV3_DFP, /* option vector 4: IBM PAPR implementation */ - 2 - 2, /* length */ + 3 - 2, /* length */ 0, /* don't halt */ + OV4_MIN_ENT_CAP, /* minimum VP entitled capacity */ /* option vector 5: PAPR/OF options */ - 13 - 2, /* length */ + 18 - 2, /* length */ 0, /* don't ignore, don't halt */ OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY | OV5_DONATE_DEDICATE_CPU | OV5_MSI, @@ -762,8 +768,13 @@ static unsigned char ibm_architecture_vec[] = { * must match by the macro below. Update the definition if * the structure layout changes. */ -#define IBM_ARCH_VEC_NRCORES_OFFSET 100 +#define IBM_ARCH_VEC_NRCORES_OFFSET 101 W(NR_CPUS), /* number of cores supported */ + 0, + 0, + 0, + 0, + OV5_PFO_HW_RNG | OV5_PFO_HW_ENCR, /* option vector 6: IBM PAPR hints */ 4 - 2, /* length */ diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 8d8e028893be..c10fc28b9092 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -1432,40 +1432,6 @@ static long ppc_del_hwdebug(struct task_struct *child, long addr, long data) #endif } -/* - * Here are the old "legacy" powerpc specific getregs/setregs ptrace calls, - * we mark them as obsolete now, they will be removed in a future version - */ -static long arch_ptrace_old(struct task_struct *child, long request, - unsigned long addr, unsigned long data) -{ - void __user *datavp = (void __user *) data; - - switch (request) { - case PPC_PTRACE_GETREGS: /* Get GPRs 0 - 31. */ - return copy_regset_to_user(child, &user_ppc_native_view, - REGSET_GPR, 0, 32 * sizeof(long), - datavp); - - case PPC_PTRACE_SETREGS: /* Set GPRs 0 - 31. */ - return copy_regset_from_user(child, &user_ppc_native_view, - REGSET_GPR, 0, 32 * sizeof(long), - datavp); - - case PPC_PTRACE_GETFPREGS: /* Get FPRs 0 - 31. */ - return copy_regset_to_user(child, &user_ppc_native_view, - REGSET_FPR, 0, 32 * sizeof(double), - datavp); - - case PPC_PTRACE_SETFPREGS: /* Set FPRs 0 - 31. */ - return copy_regset_from_user(child, &user_ppc_native_view, - REGSET_FPR, 0, 32 * sizeof(double), - datavp); - } - - return -EPERM; -} - long arch_ptrace(struct task_struct *child, long request, unsigned long addr, unsigned long data) { @@ -1687,14 +1653,6 @@ long arch_ptrace(struct task_struct *child, long request, datavp); #endif - /* Old reverse args ptrace callss */ - case PPC_PTRACE_GETREGS: /* Get GPRs 0 - 31. */ - case PPC_PTRACE_SETREGS: /* Set GPRs 0 - 31. */ - case PPC_PTRACE_GETFPREGS: /* Get FPRs 0 - 31. */ - case PPC_PTRACE_SETFPREGS: /* Get FPRs 0 - 31. */ - ret = arch_ptrace_old(child, request, addr, data); - break; - default: ret = ptrace_request(child, request, addr, data); break; @@ -1710,7 +1668,7 @@ long do_syscall_trace_enter(struct pt_regs *regs) { long ret = 0; - secure_computing(regs->gpr[0]); + secure_computing_strict(regs->gpr[0]); if (test_thread_flag(TIF_SYSCALL_TRACE) && tracehook_report_syscall_entry(regs)) diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 469349d14a97..8c21658719d9 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -39,30 +39,6 @@ * in exit.c or in signal.c. */ -/* - * Here are the old "legacy" powerpc specific getregs/setregs ptrace calls, - * we mark them as obsolete now, they will be removed in a future version - */ -static long compat_ptrace_old(struct task_struct *child, long request, - long addr, long data) -{ - switch (request) { - case PPC_PTRACE_GETREGS: /* Get GPRs 0 - 31. */ - return copy_regset_to_user(child, - task_user_regset_view(current), 0, - 0, 32 * sizeof(compat_long_t), - compat_ptr(data)); - - case PPC_PTRACE_SETREGS: /* Set GPRs 0 - 31. */ - return copy_regset_from_user(child, - task_user_regset_view(current), 0, - 0, 32 * sizeof(compat_long_t), - compat_ptr(data)); - } - - return -EPERM; -} - /* Macros to workout the correct index for the FPR in the thread struct */ #define FPRNUMBER(i) (((i) - PT_FPR0) >> 1) #define FPRHALF(i) (((i) - PT_FPR0) & 1) @@ -308,8 +284,6 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, case PTRACE_SETVSRREGS: case PTRACE_GETREGS64: case PTRACE_SETREGS64: - case PPC_PTRACE_GETFPREGS: - case PPC_PTRACE_SETFPREGS: case PTRACE_KILL: case PTRACE_SINGLESTEP: case PTRACE_DETACH: @@ -322,12 +296,6 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, ret = arch_ptrace(child, request, addr, data); break; - /* Old reverse args ptrace callss */ - case PPC_PTRACE_GETREGS: /* Get GPRs 0 - 31. */ - case PPC_PTRACE_SETREGS: /* Set GPRs 0 - 31. */ - ret = compat_ptrace_old(child, request, addr, data); - break; - default: ret = compat_ptrace_request(child, request, addr, data); break; diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 9825f29d1faf..ec8a53fa9e8f 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -150,6 +150,9 @@ notrace void __init machine_init(u64 dt_ptr) } #ifdef CONFIG_BOOKE_WDT +extern u32 booke_wdt_enabled; +extern u32 booke_wdt_period; + /* Checks wdt=x and wdt_period=xx command-line option */ notrace int __init early_parse_wdt(char *p) { diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index d9f94410fd7f..e4cb34322de4 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -57,27 +57,9 @@ #define DBG(fmt...) #endif - -/* Store all idle threads, this can be reused instead of creating -* a new thread. Also avoids complicated thread destroy functionality -* for idle threads. -*/ #ifdef CONFIG_HOTPLUG_CPU -/* - * Needed only for CONFIG_HOTPLUG_CPU because __cpuinitdata is - * removed after init for !CONFIG_HOTPLUG_CPU. - */ -static DEFINE_PER_CPU(struct task_struct *, idle_thread_array); -#define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x)) -#define set_idle_for_cpu(x, p) (per_cpu(idle_thread_array, x) = (p)) - /* State of each CPU during hotplug phases */ static DEFINE_PER_CPU(int, cpu_state) = { 0 }; - -#else -static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ; -#define get_idle_for_cpu(x) (idle_thread_array[(x)]) -#define set_idle_for_cpu(x, p) (idle_thread_array[(x)] = (p)) #endif struct thread_info *secondary_ti; @@ -429,60 +411,19 @@ int generic_check_cpu_restart(unsigned int cpu) } #endif -struct create_idle { - struct work_struct work; - struct task_struct *idle; - struct completion done; - int cpu; -}; - -static void __cpuinit do_fork_idle(struct work_struct *work) +static void cpu_idle_thread_init(unsigned int cpu, struct task_struct *idle) { - struct create_idle *c_idle = - container_of(work, struct create_idle, work); - - c_idle->idle = fork_idle(c_idle->cpu); - complete(&c_idle->done); -} - -static int __cpuinit create_idle(unsigned int cpu) -{ - struct thread_info *ti; - struct create_idle c_idle = { - .cpu = cpu, - .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done), - }; - INIT_WORK_ONSTACK(&c_idle.work, do_fork_idle); - - c_idle.idle = get_idle_for_cpu(cpu); - - /* We can't use kernel_thread since we must avoid to - * reschedule the child. We use a workqueue because - * we want to fork from a kernel thread, not whatever - * userspace process happens to be trying to online us. - */ - if (!c_idle.idle) { - schedule_work(&c_idle.work); - wait_for_completion(&c_idle.done); - } else - init_idle(c_idle.idle, cpu); - if (IS_ERR(c_idle.idle)) { - pr_err("Failed fork for CPU %u: %li", cpu, PTR_ERR(c_idle.idle)); - return PTR_ERR(c_idle.idle); - } - ti = task_thread_info(c_idle.idle); + struct thread_info *ti = task_thread_info(idle); #ifdef CONFIG_PPC64 - paca[cpu].__current = c_idle.idle; + paca[cpu].__current = idle; paca[cpu].kstack = (unsigned long)ti + THREAD_SIZE - STACK_FRAME_OVERHEAD; #endif ti->cpu = cpu; - current_set[cpu] = ti; - - return 0; + secondary_ti = current_set[cpu] = ti; } -int __cpuinit __cpu_up(unsigned int cpu) +int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle) { int rc, c; @@ -490,12 +431,7 @@ int __cpuinit __cpu_up(unsigned int cpu) (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))) return -EINVAL; - /* Make sure we have an idle thread */ - rc = create_idle(cpu); - if (rc) - return rc; - - secondary_ti = current_set[cpu]; + cpu_idle_thread_init(cpu, tidle); /* Make sure callin-map entry is 0 (can be leftover a CPU * hotplug diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 6aa0c663e247..158972341a2d 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -248,7 +248,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) addr, regs->nip, regs->link, code); } - if (!arch_irq_disabled_regs(regs)) + if (arch_irqs_disabled() && !arch_irq_disabled_regs(regs)) local_irq_enable(); memset(&info, 0, sizeof(info)); @@ -1019,7 +1019,9 @@ void __kprobes program_check_exception(struct pt_regs *regs) return; } - local_irq_enable(); + /* We restore the interrupt state now */ + if (!arch_irq_disabled_regs(regs)) + local_irq_enable(); #ifdef CONFIG_MATH_EMULATION /* (reason & REASON_ILLEGAL) would be the obvious thing here, @@ -1069,6 +1071,10 @@ void alignment_exception(struct pt_regs *regs) { int sig, code, fixed = 0; + /* We restore the interrupt state now */ + if (!arch_irq_disabled_regs(regs)) + local_irq_enable(); + /* we don't implement logging of alignment exceptions */ if (!(current->thread.align_ctl & PR_UNALIGN_SIGBUS)) fixed = fix_alignment(regs); diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index 4d5a3edff49e..e830289d2e48 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -89,6 +89,16 @@ _GLOBAL(load_up_altivec) /* restore registers and return */ blr +_GLOBAL(giveup_altivec_notask) + mfmsr r3 + andis. r4,r3,MSR_VEC@h + bnelr /* Already enabled? */ + oris r3,r3,MSR_VEC@h + SYNC + MTMSRD(r3) /* enable use of VMX now */ + isync + blr + /* * giveup_altivec(tsk) * Disable VMX for the task given as the argument, diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index b2f7c8480bf6..cb87301ccd55 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -14,7 +14,9 @@ * 2 of the License, or (at your option) any later version. */ +#include <linux/cpu.h> #include <linux/types.h> +#include <linux/delay.h> #include <linux/stat.h> #include <linux/device.h> #include <linux/init.h> @@ -482,7 +484,8 @@ static void vio_cmo_balance(struct work_struct *work) } static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) { struct vio_dev *viodev = to_vio_dev(dev); void *ret; @@ -492,7 +495,7 @@ static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size, return NULL; } - ret = dma_iommu_ops.alloc_coherent(dev, size, dma_handle, flag); + ret = dma_iommu_ops.alloc(dev, size, dma_handle, flag, attrs); if (unlikely(ret == NULL)) { vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE)); atomic_inc(&viodev->cmo.allocs_failed); @@ -502,11 +505,12 @@ static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size, } static void vio_dma_iommu_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs) { struct vio_dev *viodev = to_vio_dev(dev); - dma_iommu_ops.free_coherent(dev, size, vaddr, dma_handle); + dma_iommu_ops.free(dev, size, vaddr, dma_handle, attrs); vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE)); } @@ -607,8 +611,8 @@ static u64 vio_dma_get_required_mask(struct device *dev) } struct dma_map_ops vio_dma_mapping_ops = { - .alloc_coherent = vio_dma_iommu_alloc_coherent, - .free_coherent = vio_dma_iommu_free_coherent, + .alloc = vio_dma_iommu_alloc_coherent, + .free = vio_dma_iommu_free_coherent, .map_sg = vio_dma_iommu_map_sg, .unmap_sg = vio_dma_iommu_unmap_sg, .map_page = vio_dma_iommu_map_page, @@ -707,13 +711,26 @@ static int vio_cmo_bus_probe(struct vio_dev *viodev) struct vio_driver *viodrv = to_vio_driver(dev->driver); unsigned long flags; size_t size; + bool dma_capable = false; + + /* A device requires entitlement if it has a DMA window property */ + switch (viodev->family) { + case VDEVICE: + if (of_get_property(viodev->dev.of_node, + "ibm,my-dma-window", NULL)) + dma_capable = true; + break; + case PFO: + dma_capable = false; + break; + default: + dev_warn(dev, "unknown device family: %d\n", viodev->family); + BUG(); + break; + } - /* - * Check to see that device has a DMA window and configure - * entitlement for the device. - */ - if (of_get_property(viodev->dev.of_node, - "ibm,my-dma-window", NULL)) { + /* Configure entitlement for the device. */ + if (dma_capable) { /* Check that the driver is CMO enabled and get desired DMA */ if (!viodrv->get_desired_dma) { dev_err(dev, "%s: device driver does not support CMO\n", @@ -1048,6 +1065,94 @@ static void vio_cmo_sysfs_init(void) { } EXPORT_SYMBOL(vio_cmo_entitlement_update); EXPORT_SYMBOL(vio_cmo_set_dev_desired); + +/* + * Platform Facilities Option (PFO) support + */ + +/** + * vio_h_cop_sync - Perform a synchronous PFO co-processor operation + * + * @vdev - Pointer to a struct vio_dev for device + * @op - Pointer to a struct vio_pfo_op for the operation parameters + * + * Calls the hypervisor to synchronously perform the PFO operation + * described in @op. In the case of a busy response from the hypervisor, + * the operation will be re-submitted indefinitely unless a non-zero timeout + * is specified or an error occurs. The timeout places a limit on when to + * stop re-submitting a operation, the total time can be exceeded if an + * operation is in progress. + * + * If op->hcall_ret is not NULL, this will be set to the return from the + * last h_cop_op call or it will be 0 if an error not involving the h_call + * was encountered. + * + * Returns: + * 0 on success, + * -EINVAL if the h_call fails due to an invalid parameter, + * -E2BIG if the h_call can not be performed synchronously, + * -EBUSY if a timeout is specified and has elapsed, + * -EACCES if the memory area for data/status has been rescinded, or + * -EPERM if a hardware fault has been indicated + */ +int vio_h_cop_sync(struct vio_dev *vdev, struct vio_pfo_op *op) +{ + struct device *dev = &vdev->dev; + unsigned long deadline = 0; + long hret = 0; + int ret = 0; + + if (op->timeout) + deadline = jiffies + msecs_to_jiffies(op->timeout); + + while (true) { + hret = plpar_hcall_norets(H_COP, op->flags, + vdev->resource_id, + op->in, op->inlen, op->out, + op->outlen, op->csbcpb); + + if (hret == H_SUCCESS || + (hret != H_NOT_ENOUGH_RESOURCES && + hret != H_BUSY && hret != H_RESOURCE) || + (op->timeout && time_after(deadline, jiffies))) + break; + + dev_dbg(dev, "%s: hcall ret(%ld), retrying.\n", __func__, hret); + } + + switch (hret) { + case H_SUCCESS: + ret = 0; + break; + case H_OP_MODE: + case H_TOO_BIG: + ret = -E2BIG; + break; + case H_RESCINDED: + ret = -EACCES; + break; + case H_HARDWARE: + ret = -EPERM; + break; + case H_NOT_ENOUGH_RESOURCES: + case H_RESOURCE: + case H_BUSY: + ret = -EBUSY; + break; + default: + ret = -EINVAL; + break; + } + + if (ret) + dev_dbg(dev, "%s: Sync h_cop_op failure (ret:%d) (hret:%ld)\n", + __func__, ret, hret); + + op->hcall_err = hret; + return ret; +} +EXPORT_SYMBOL(vio_h_cop_sync); + static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev) { const unsigned char *dma_window; @@ -1209,35 +1314,87 @@ static void __devinit vio_dev_release(struct device *dev) struct vio_dev *vio_register_device_node(struct device_node *of_node) { struct vio_dev *viodev; + struct device_node *parent_node; const unsigned int *unit_address; + const unsigned int *pfo_resid = NULL; + enum vio_dev_family family; + const char *of_node_name = of_node->name ? of_node->name : "<unknown>"; - /* we need the 'device_type' property, in order to match with drivers */ - if (of_node->type == NULL) { - printk(KERN_WARNING "%s: node %s missing 'device_type'\n", - __func__, - of_node->name ? of_node->name : "<unknown>"); + /* + * Determine if this node is a under the /vdevice node or under the + * /ibm,platform-facilities node. This decides the device's family. + */ + parent_node = of_get_parent(of_node); + if (parent_node) { + if (!strcmp(parent_node->full_name, "/ibm,platform-facilities")) + family = PFO; + else if (!strcmp(parent_node->full_name, "/vdevice")) + family = VDEVICE; + else { + pr_warn("%s: parent(%s) of %s not recognized.\n", + __func__, + parent_node->full_name, + of_node_name); + of_node_put(parent_node); + return NULL; + } + of_node_put(parent_node); + } else { + pr_warn("%s: could not determine the parent of node %s.\n", + __func__, of_node_name); return NULL; } - unit_address = of_get_property(of_node, "reg", NULL); - if (unit_address == NULL) { - printk(KERN_WARNING "%s: node %s missing 'reg'\n", - __func__, - of_node->name ? of_node->name : "<unknown>"); - return NULL; + if (family == PFO) { + if (of_get_property(of_node, "interrupt-controller", NULL)) { + pr_debug("%s: Skipping the interrupt controller %s.\n", + __func__, of_node_name); + return NULL; + } } /* allocate a vio_dev for this node */ viodev = kzalloc(sizeof(struct vio_dev), GFP_KERNEL); - if (viodev == NULL) + if (viodev == NULL) { + pr_warn("%s: allocation failure for VIO device.\n", __func__); return NULL; + } - viodev->irq = irq_of_parse_and_map(of_node, 0); + /* we need the 'device_type' property, in order to match with drivers */ + viodev->family = family; + if (viodev->family == VDEVICE) { + if (of_node->type != NULL) + viodev->type = of_node->type; + else { + pr_warn("%s: node %s is missing the 'device_type' " + "property.\n", __func__, of_node_name); + goto out; + } + + unit_address = of_get_property(of_node, "reg", NULL); + if (unit_address == NULL) { + pr_warn("%s: node %s missing 'reg'\n", + __func__, of_node_name); + goto out; + } + dev_set_name(&viodev->dev, "%x", *unit_address); + viodev->irq = irq_of_parse_and_map(of_node, 0); + viodev->unit_address = *unit_address; + } else { + /* PFO devices need their resource_id for submitting COP_OPs + * This is an optional field for devices, but is required when + * performing synchronous ops */ + pfo_resid = of_get_property(of_node, "ibm,resource-id", NULL); + if (pfo_resid != NULL) + viodev->resource_id = *pfo_resid; + + unit_address = NULL; + dev_set_name(&viodev->dev, "%s", of_node_name); + viodev->type = of_node_name; + viodev->irq = 0; + } - dev_set_name(&viodev->dev, "%x", *unit_address); viodev->name = of_node->name; - viodev->type = of_node->type; - viodev->unit_address = *unit_address; viodev->dev.of_node = of_node_get(of_node); if (firmware_has_feature(FW_FEATURE_CMO)) @@ -1265,16 +1422,51 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node) } return viodev; + +out: /* Use this exit point for any return prior to device_register */ + kfree(viodev); + + return NULL; } EXPORT_SYMBOL(vio_register_device_node); +/* + * vio_bus_scan_for_devices - Scan OF and register each child device + * @root_name - OF node name for the root of the subtree to search. + * This must be non-NULL + * + * Starting from the root node provide, register the device node for + * each child beneath the root. + */ +static void vio_bus_scan_register_devices(char *root_name) +{ + struct device_node *node_root, *node_child; + + if (!root_name) + return; + + node_root = of_find_node_by_name(NULL, root_name); + if (node_root) { + + /* + * Create struct vio_devices for each virtual device in + * the device tree. Drivers will associate with them later. + */ + node_child = of_get_next_child(node_root, NULL); + while (node_child) { + vio_register_device_node(node_child); + node_child = of_get_next_child(node_root, node_child); + } + of_node_put(node_root); + } +} + /** * vio_bus_init: - Initialize the virtual IO bus */ static int __init vio_bus_init(void) { int err; - struct device_node *node_vroot; if (firmware_has_feature(FW_FEATURE_CMO)) vio_cmo_sysfs_init(); @@ -1299,19 +1491,8 @@ static int __init vio_bus_init(void) if (firmware_has_feature(FW_FEATURE_CMO)) vio_cmo_bus_init(); - node_vroot = of_find_node_by_name(NULL, "vdevice"); - if (node_vroot) { - struct device_node *of_node; - - /* - * Create struct vio_devices for each virtual device in - * the device tree. Drivers will associate with them later. - */ - for (of_node = node_vroot->child; of_node != NULL; - of_node = of_node->sibling) - vio_register_device_node(of_node); - of_node_put(node_vroot); - } + vio_bus_scan_register_devices("vdevice"); + vio_bus_scan_register_devices("ibm,platform-facilities"); return 0; } @@ -1434,12 +1615,28 @@ struct vio_dev *vio_find_node(struct device_node *vnode) { const uint32_t *unit_address; char kobj_name[20]; + struct device_node *vnode_parent; + const char *dev_type; + + vnode_parent = of_get_parent(vnode); + if (!vnode_parent) + return NULL; + + dev_type = of_get_property(vnode_parent, "device_type", NULL); + of_node_put(vnode_parent); + if (!dev_type) + return NULL; /* construct the kobject name from the device node */ - unit_address = of_get_property(vnode, "reg", NULL); - if (!unit_address) + if (!strcmp(dev_type, "vdevice")) { + unit_address = of_get_property(vnode, "reg", NULL); + if (!unit_address) + return NULL; + snprintf(kobj_name, sizeof(kobj_name), "%x", *unit_address); + } else if (!strcmp(dev_type, "ibm,platform-facilities")) + snprintf(kobj_name, sizeof(kobj_name), "%s", vnode->name); + else return NULL; - snprintf(kobj_name, sizeof(kobj_name), "%x", *unit_address); return vio_find_name(kobj_name); } diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c index 6f87f39a1ac2..10fc8ec9d2a8 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_host.c +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -194,14 +194,14 @@ static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid) backwards_map = !backwards_map; /* Uh-oh ... out of mappings. Let's flush! */ - if (vcpu_book3s->vsid_next == vcpu_book3s->vsid_max) { - vcpu_book3s->vsid_next = vcpu_book3s->vsid_first; + if (vcpu_book3s->proto_vsid_next == vcpu_book3s->proto_vsid_max) { + vcpu_book3s->proto_vsid_next = vcpu_book3s->proto_vsid_first; memset(vcpu_book3s->sid_map, 0, sizeof(struct kvmppc_sid_map) * SID_MAP_NUM); kvmppc_mmu_pte_flush(vcpu, 0, 0); kvmppc_mmu_flush_segments(vcpu); } - map->host_vsid = vcpu_book3s->vsid_next++; + map->host_vsid = vsid_scramble(vcpu_book3s->proto_vsid_next++, 256M); map->guest_vsid = gvsid; map->valid = true; @@ -319,9 +319,10 @@ int kvmppc_mmu_init(struct kvm_vcpu *vcpu) return -1; vcpu3s->context_id[0] = err; - vcpu3s->vsid_max = ((vcpu3s->context_id[0] + 1) << USER_ESID_BITS) - 1; - vcpu3s->vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS; - vcpu3s->vsid_next = vcpu3s->vsid_first; + vcpu3s->proto_vsid_max = ((vcpu3s->context_id[0] + 1) + << USER_ESID_BITS) - 1; + vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS; + vcpu3s->proto_vsid_next = vcpu3s->proto_vsid_first; kvmppc_mmu_hpte_init(vcpu); diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c index ddc485a529f2..c3beaeef3f60 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_hv.c +++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c @@ -258,6 +258,8 @@ static long kvmppc_get_guest_page(struct kvm *kvm, unsigned long gfn, !(memslot->userspace_addr & (s - 1))) { start &= ~(s - 1); pgsize = s; + get_page(hpage); + put_page(page); page = hpage; } } @@ -281,11 +283,8 @@ static long kvmppc_get_guest_page(struct kvm *kvm, unsigned long gfn, err = 0; out: - if (got) { - if (PageHuge(page)) - page = compound_head(page); + if (got) put_page(page); - } return err; up_err: @@ -678,8 +677,15 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu, SetPageDirty(page); out_put: - if (page) - put_page(page); + if (page) { + /* + * We drop pages[0] here, not page because page might + * have been set to the head page of a compound, but + * we have to drop the reference on the correct tail + * page to match the get inside gup() + */ + put_page(pages[0]); + } return ret; out_unlock: @@ -979,6 +985,7 @@ void *kvmppc_pin_guest_page(struct kvm *kvm, unsigned long gpa, pa = *physp; } page = pfn_to_page(pa >> PAGE_SHIFT); + get_page(page); } else { hva = gfn_to_hva_memslot(memslot, gfn); npages = get_user_pages_fast(hva, 1, 1, pages); @@ -991,8 +998,6 @@ void *kvmppc_pin_guest_page(struct kvm *kvm, unsigned long gpa, page = compound_head(page); psize <<= compound_order(page); } - if (!kvm->arch.using_mmu_notifiers) - get_page(page); offset = gpa & (psize - 1); if (nb_ret) *nb_ret = psize - offset; @@ -1003,7 +1008,6 @@ void kvmppc_unpin_guest_page(struct kvm *kvm, void *va) { struct page *page = virt_to_page(va); - page = compound_head(page); put_page(page); } diff --git a/arch/powerpc/kvm/book3s_emulate.c b/arch/powerpc/kvm/book3s_emulate.c index f1950d131827..135663a3e4fc 100644 --- a/arch/powerpc/kvm/book3s_emulate.c +++ b/arch/powerpc/kvm/book3s_emulate.c @@ -21,6 +21,7 @@ #include <asm/disassemble.h> #include <asm/kvm_book3s.h> #include <asm/reg.h> +#include <asm/switch_to.h> #define OP_19_XOP_RFID 18 #define OP_19_XOP_RFI 50 diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 01294a5099dd..108d1f580177 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -1192,8 +1192,6 @@ static void unpin_slot(struct kvm *kvm, int slot_id) continue; pfn = physp[j] >> PAGE_SHIFT; page = pfn_to_page(pfn); - if (PageHuge(page)) - page = compound_head(page); SetPageDirty(page); put_page(page); } diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c index bed1279aa6a8..e1b60f56f2a1 100644 --- a/arch/powerpc/kvm/book3s_hv_builtin.c +++ b/arch/powerpc/kvm/book3s_hv_builtin.c @@ -173,9 +173,9 @@ static void __init kvm_linear_init_one(ulong size, int count, int type) static struct kvmppc_linear_info *kvm_alloc_linear(int type) { - struct kvmppc_linear_info *ri; + struct kvmppc_linear_info *ri, *ret; - ri = NULL; + ret = NULL; spin_lock(&linear_lock); list_for_each_entry(ri, &free_linears, list) { if (ri->type != type) @@ -183,11 +183,12 @@ static struct kvmppc_linear_info *kvm_alloc_linear(int type) list_del(&ri->list); atomic_inc(&ri->use_count); + memset(ri->base_virt, 0, ri->npages << PAGE_SHIFT); + ret = ri; break; } spin_unlock(&linear_lock); - memset(ri->base_virt, 0, ri->npages << PAGE_SHIFT); - return ri; + return ret; } static void kvm_release_linear(struct kvmppc_linear_info *ri) diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S b/arch/powerpc/kvm/book3s_hv_interrupts.S index 3f7b674dd4bf..d3fb4df02c41 100644 --- a/arch/powerpc/kvm/book3s_hv_interrupts.S +++ b/arch/powerpc/kvm/book3s_hv_interrupts.S @@ -46,8 +46,10 @@ _GLOBAL(__kvmppc_vcore_entry) /* Save host state to the stack */ stdu r1, -SWITCH_FRAME_SIZE(r1) - /* Save non-volatile registers (r14 - r31) */ + /* Save non-volatile registers (r14 - r31) and CR */ SAVE_NVGPRS(r1) + mfcr r3 + std r3, _CCR(r1) /* Save host DSCR */ BEGIN_FTR_SECTION @@ -157,8 +159,10 @@ kvmppc_handler_highmem: * R13 = PACA */ - /* Restore non-volatile host registers (r14 - r31) */ + /* Restore non-volatile host registers (r14 - r31) and CR */ REST_NVGPRS(r1) + ld r4, _CCR(r1) + mtcr r4 addi r1, r1, SWITCH_FRAME_SIZE ld r0, PPC_LR_STKOFF(r1) diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c index def880aea63a..cec4daddbf31 100644 --- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c +++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c @@ -463,6 +463,7 @@ long kvmppc_h_bulk_remove(struct kvm_vcpu *vcpu) /* insert R and C bits from PTE */ rcbits = rev->guest_rpte & (HPTE_R_R|HPTE_R_C); args[j] |= rcbits << (56 - 5); + hp[0] = 0; continue; } diff --git a/arch/powerpc/kvm/book3s_interrupts.S b/arch/powerpc/kvm/book3s_interrupts.S index 0a8515a5c042..3e35383bdb21 100644 --- a/arch/powerpc/kvm/book3s_interrupts.S +++ b/arch/powerpc/kvm/book3s_interrupts.S @@ -84,6 +84,10 @@ kvm_start_entry: /* Save non-volatile registers (r14 - r31) */ SAVE_NVGPRS(r1) + /* Save CR */ + mfcr r14 + stw r14, _CCR(r1) + /* Save LR */ PPC_STL r0, _LINK(r1) @@ -165,6 +169,9 @@ kvm_exit_loop: PPC_LL r4, _LINK(r1) mtlr r4 + lwz r14, _CCR(r1) + mtcr r14 + /* Restore non-volatile host registers (r14 - r31) */ REST_NVGPRS(r1) diff --git a/arch/powerpc/kvm/book3s_paired_singles.c b/arch/powerpc/kvm/book3s_paired_singles.c index e70ef2d86431..a59a25a13218 100644 --- a/arch/powerpc/kvm/book3s_paired_singles.c +++ b/arch/powerpc/kvm/book3s_paired_singles.c @@ -24,6 +24,7 @@ #include <asm/kvm_fpu.h> #include <asm/reg.h> #include <asm/cacheflush.h> +#include <asm/switch_to.h> #include <linux/vmalloc.h> /* #define DEBUG */ diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c index 7340e1090b77..7759053d391b 100644 --- a/arch/powerpc/kvm/book3s_pr.c +++ b/arch/powerpc/kvm/book3s_pr.c @@ -33,6 +33,7 @@ #include <asm/kvm_ppc.h> #include <asm/kvm_book3s.h> #include <asm/mmu_context.h> +#include <asm/switch_to.h> #include <linux/gfp.h> #include <linux/sched.h> #include <linux/vmalloc.h> @@ -776,6 +777,7 @@ program_interrupt: } } + preempt_disable(); if (!(r & RESUME_HOST)) { /* To avoid clobbering exit_reason, only check for signals if * we aren't already exiting to userspace for some other @@ -797,8 +799,6 @@ program_interrupt: run->exit_reason = KVM_EXIT_INTR; r = -EINTR; } else { - preempt_disable(); - /* In case an interrupt came in that was triggered * from userspace (like DEC), we need to check what * to inject now! */ @@ -880,7 +880,8 @@ int kvm_vcpu_ioctl_get_one_reg(struct kvm_vcpu *vcpu, struct kvm_one_reg *reg) switch (reg->id) { case KVM_REG_PPC_HIOR: - r = put_user(to_book3s(vcpu)->hior, (u64 __user *)reg->addr); + r = copy_to_user((u64 __user *)(long)reg->addr, + &to_book3s(vcpu)->hior, sizeof(u64)); break; default: break; @@ -895,7 +896,8 @@ int kvm_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu, struct kvm_one_reg *reg) switch (reg->id) { case KVM_REG_PPC_HIOR: - r = get_user(to_book3s(vcpu)->hior, (u64 __user *)reg->addr); + r = copy_from_user(&to_book3s(vcpu)->hior, + (u64 __user *)(long)reg->addr, sizeof(u64)); if (!r) to_book3s(vcpu)->hior_explicit = true; break; diff --git a/arch/powerpc/kvm/book3s_segment.S b/arch/powerpc/kvm/book3s_segment.S index 0676ae249b9f..6e6e9cef34a8 100644 --- a/arch/powerpc/kvm/book3s_segment.S +++ b/arch/powerpc/kvm/book3s_segment.S @@ -197,7 +197,8 @@ kvmppc_interrupt: /* Save guest PC and MSR */ #ifdef CONFIG_PPC64 BEGIN_FTR_SECTION - andi. r0,r12,0x2 + andi. r0, r12, 0x2 + cmpwi cr1, r0, 0 beq 1f mfspr r3,SPRN_HSRR0 mfspr r4,SPRN_HSRR1 @@ -250,6 +251,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) beq ld_last_prev_inst cmpwi r12, BOOK3S_INTERRUPT_ALIGNMENT beq- ld_last_inst +#ifdef CONFIG_PPC64 +BEGIN_FTR_SECTION + cmpwi r12, BOOK3S_INTERRUPT_H_EMUL_ASSIST + beq- ld_last_inst +END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) +#endif b no_ld_last_inst @@ -316,23 +323,17 @@ no_dcbz32_off: * Having set up SRR0/1 with the address where we want * to continue with relocation on (potentially in module * space), we either just go straight there with rfi[d], - * or we jump to an interrupt handler with bctr if there - * is an interrupt to be handled first. In the latter - * case, the rfi[d] at the end of the interrupt handler - * will get us back to where we want to continue. + * or we jump to an interrupt handler if there is an + * interrupt to be handled first. In the latter case, + * the rfi[d] at the end of the interrupt handler will + * get us back to where we want to continue. */ - cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL - beq 1f - cmpwi r12, BOOK3S_INTERRUPT_DECREMENTER - beq 1f - cmpwi r12, BOOK3S_INTERRUPT_PERFMON -1: mtctr r12 - /* Register usage at this point: * * R1 = host R1 * R2 = host R2 + * R10 = raw exit handler id * R12 = exit handler id * R13 = shadow vcpu (32-bit) or PACA (64-bit) * SVCPU.* = guest * @@ -342,12 +343,25 @@ no_dcbz32_off: PPC_LL r6, HSTATE_HOST_MSR(r13) PPC_LL r8, HSTATE_VMHANDLER(r13) - /* Restore host msr -> SRR1 */ +#ifdef CONFIG_PPC64 +BEGIN_FTR_SECTION + beq cr1, 1f + mtspr SPRN_HSRR1, r6 + mtspr SPRN_HSRR0, r8 +END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) +#endif +1: /* Restore host msr -> SRR1 */ mtsrr1 r6 /* Load highmem handler address */ mtsrr0 r8 /* RFI into the highmem handler, or jump to interrupt handler */ - beqctr + cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL + beqa BOOK3S_INTERRUPT_EXTERNAL + cmpwi r12, BOOK3S_INTERRUPT_DECREMENTER + beqa BOOK3S_INTERRUPT_DECREMENTER + cmpwi r12, BOOK3S_INTERRUPT_PERFMON + beqa BOOK3S_INTERRUPT_PERFMON + RFI kvmppc_handler_trampoline_exit_end: diff --git a/arch/powerpc/kvm/booke_interrupts.S b/arch/powerpc/kvm/booke_interrupts.S index 10d8ef602e5c..c8c4b878795a 100644 --- a/arch/powerpc/kvm/booke_interrupts.S +++ b/arch/powerpc/kvm/booke_interrupts.S @@ -34,7 +34,8 @@ /* r2 is special: it holds 'current', and it made nonvolatile in the * kernel with the -ffixed-r2 gcc option. */ #define HOST_R2 12 -#define HOST_NV_GPRS 16 +#define HOST_CR 16 +#define HOST_NV_GPRS 20 #define HOST_NV_GPR(n) (HOST_NV_GPRS + ((n - 14) * 4)) #define HOST_MIN_STACK_SIZE (HOST_NV_GPR(31) + 4) #define HOST_STACK_SIZE (((HOST_MIN_STACK_SIZE + 15) / 16) * 16) /* Align. */ @@ -296,8 +297,10 @@ heavyweight_exit: /* Return to kvm_vcpu_run(). */ lwz r4, HOST_STACK_LR(r1) + lwz r5, HOST_CR(r1) addi r1, r1, HOST_STACK_SIZE mtlr r4 + mtcr r5 /* r3 still contains the return code from kvmppc_handle_exit(). */ blr @@ -314,6 +317,8 @@ _GLOBAL(__kvmppc_vcpu_run) stw r3, HOST_RUN(r1) mflr r3 stw r3, HOST_STACK_LR(r1) + mfcr r5 + stw r5, HOST_CR(r1) /* Save host non-volatile register state to stack. */ stw r14, HOST_NV_GPR(r14)(r1) diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S index 773d38f90aaa..d73a59014900 100644 --- a/arch/powerpc/lib/copyuser_64.S +++ b/arch/powerpc/lib/copyuser_64.S @@ -30,7 +30,7 @@ _GLOBAL(__copy_tofrom_user_base) dcbt 0,r4 beq .Lcopy_page_4K andi. r6,r6,7 - PPC_MTOCRF 0x01,r5 + PPC_MTOCRF(0x01,r5) blt cr1,.Lshort_copy /* Below we want to nop out the bne if we're on a CPU that has the * CPU_FTR_UNALIGNED_LD_STD bit set and the CPU_FTR_CP_USE_DCBTZ bit @@ -186,7 +186,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) blr .Ldst_unaligned: - PPC_MTOCRF 0x01,r6 /* put #bytes to 8B bdry into cr7 */ + PPC_MTOCRF(0x01,r6) /* put #bytes to 8B bdry into cr7 */ subf r5,r6,r5 li r7,0 cmpldi cr1,r5,16 @@ -201,7 +201,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 2: bf cr7*4+1,3f 37: lwzx r0,r7,r4 83: stwx r0,r7,r3 -3: PPC_MTOCRF 0x01,r5 +3: PPC_MTOCRF(0x01,r5) add r4,r6,r4 add r3,r6,r3 b .Ldst_aligned diff --git a/arch/powerpc/lib/mem_64.S b/arch/powerpc/lib/mem_64.S index 11ce045e21fd..f4fcb0bc6563 100644 --- a/arch/powerpc/lib/mem_64.S +++ b/arch/powerpc/lib/mem_64.S @@ -19,7 +19,7 @@ _GLOBAL(memset) rlwimi r4,r4,16,0,15 cmplw cr1,r5,r0 /* do we get that far? */ rldimi r4,r4,32,0 - PPC_MTOCRF 1,r0 + PPC_MTOCRF(1,r0) mr r6,r3 blt cr1,8f beq+ 3f /* if already 8-byte aligned */ @@ -49,7 +49,7 @@ _GLOBAL(memset) bdnz 4b 5: srwi. r0,r5,3 clrlwi r5,r5,29 - PPC_MTOCRF 1,r0 + PPC_MTOCRF(1,r0) beq 8f bf 29,6f std r4,0(r6) @@ -65,7 +65,7 @@ _GLOBAL(memset) std r4,0(r6) addi r6,r6,8 8: cmpwi r5,0 - PPC_MTOCRF 1,r5 + PPC_MTOCRF(1,r5) beqlr+ bf 29,9f stw r4,0(r6) diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S index e178922b2c21..82fea3963e15 100644 --- a/arch/powerpc/lib/memcpy_64.S +++ b/arch/powerpc/lib/memcpy_64.S @@ -12,7 +12,7 @@ .align 7 _GLOBAL(memcpy) std r3,48(r1) /* save destination pointer for return value */ - PPC_MTOCRF 0x01,r5 + PPC_MTOCRF(0x01,r5) cmpldi cr1,r5,16 neg r6,r3 # LS 3 bits = # bytes to 8-byte dest bdry andi. r6,r6,7 @@ -154,7 +154,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) blr .Ldst_unaligned: - PPC_MTOCRF 0x01,r6 # put #bytes to 8B bdry into cr7 + PPC_MTOCRF(0x01,r6) # put #bytes to 8B bdry into cr7 subf r5,r6,r5 li r7,0 cmpldi cr1,r5,16 @@ -169,7 +169,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 2: bf cr7*4+1,3f lwzx r0,r7,r4 stwx r0,r7,r3 -3: PPC_MTOCRF 0x01,r5 +3: PPC_MTOCRF(0x01,r5) add r4,r6,r4 add r3,r6,r3 b .Ldst_aligned diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index fb05b123218f..1a6de0a7d8eb 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -271,7 +271,8 @@ int alloc_bootmem_huge_page(struct hstate *hstate) unsigned long gpage_npages[MMU_PAGE_COUNT]; -static int __init do_gpage_early_setup(char *param, char *val) +static int __init do_gpage_early_setup(char *param, char *val, + const char *unused) { static phys_addr_t size; unsigned long npages; diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h index af1ab5e9a691..5c3cf2d04e41 100644 --- a/arch/powerpc/net/bpf_jit.h +++ b/arch/powerpc/net/bpf_jit.h @@ -48,7 +48,13 @@ /* * Assembly helpers from arch/powerpc/net/bpf_jit.S: */ -extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[]; +#define DECLARE_LOAD_FUNC(func) \ + extern u8 func[], func##_negative_offset[], func##_positive_offset[] + +DECLARE_LOAD_FUNC(sk_load_word); +DECLARE_LOAD_FUNC(sk_load_half); +DECLARE_LOAD_FUNC(sk_load_byte); +DECLARE_LOAD_FUNC(sk_load_byte_msh); #define FUNCTION_DESCR_SIZE 24 diff --git a/arch/powerpc/net/bpf_jit_64.S b/arch/powerpc/net/bpf_jit_64.S index ff4506e85cce..55ba3855a97f 100644 --- a/arch/powerpc/net/bpf_jit_64.S +++ b/arch/powerpc/net/bpf_jit_64.S @@ -31,14 +31,13 @@ * then branch directly to slow_path_XXX if required. (In fact, could * load a spare GPR with the address of slow_path_generic and pass size * as an argument, making the call site a mtlr, li and bllr.) - * - * Technically, the "is addr < 0" check is unnecessary & slowing down - * the ABS path, as it's statically checked on generation. */ .globl sk_load_word sk_load_word: cmpdi r_addr, 0 - blt bpf_error + blt bpf_slow_path_word_neg + .globl sk_load_word_positive_offset +sk_load_word_positive_offset: /* Are we accessing past headlen? */ subi r_scratch1, r_HL, 4 cmpd r_scratch1, r_addr @@ -51,7 +50,9 @@ sk_load_word: .globl sk_load_half sk_load_half: cmpdi r_addr, 0 - blt bpf_error + blt bpf_slow_path_half_neg + .globl sk_load_half_positive_offset +sk_load_half_positive_offset: subi r_scratch1, r_HL, 2 cmpd r_scratch1, r_addr blt bpf_slow_path_half @@ -61,7 +62,9 @@ sk_load_half: .globl sk_load_byte sk_load_byte: cmpdi r_addr, 0 - blt bpf_error + blt bpf_slow_path_byte_neg + .globl sk_load_byte_positive_offset +sk_load_byte_positive_offset: cmpd r_HL, r_addr ble bpf_slow_path_byte lbzx r_A, r_D, r_addr @@ -69,22 +72,20 @@ sk_load_byte: /* * BPF_S_LDX_B_MSH: ldxb 4*([offset]&0xf) - * r_addr is the offset value, already known positive + * r_addr is the offset value */ .globl sk_load_byte_msh sk_load_byte_msh: + cmpdi r_addr, 0 + blt bpf_slow_path_byte_msh_neg + .globl sk_load_byte_msh_positive_offset +sk_load_byte_msh_positive_offset: cmpd r_HL, r_addr ble bpf_slow_path_byte_msh lbzx r_X, r_D, r_addr rlwinm r_X, r_X, 2, 32-4-2, 31-2 blr -bpf_error: - /* Entered with cr0 = lt */ - li r3, 0 - /* Generated code will 'blt epilogue', returning 0. */ - blr - /* Call out to skb_copy_bits: * We'll need to back up our volatile regs first; we have * local variable space at r1+(BPF_PPC_STACK_BASIC). @@ -136,3 +137,84 @@ bpf_slow_path_byte_msh: lbz r_X, BPF_PPC_STACK_BASIC+(2*8)(r1) rlwinm r_X, r_X, 2, 32-4-2, 31-2 blr + +/* Call out to bpf_internal_load_pointer_neg_helper: + * We'll need to back up our volatile regs first; we have + * local variable space at r1+(BPF_PPC_STACK_BASIC). + * Allocate a new stack frame here to remain ABI-compliant in + * stashing LR. + */ +#define sk_negative_common(SIZE) \ + mflr r0; \ + std r0, 16(r1); \ + /* R3 goes in parameter space of caller's frame */ \ + std r_skb, (BPF_PPC_STACKFRAME+48)(r1); \ + std r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \ + std r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \ + stdu r1, -BPF_PPC_SLOWPATH_FRAME(r1); \ + /* R3 = r_skb, as passed */ \ + mr r4, r_addr; \ + li r5, SIZE; \ + bl bpf_internal_load_pointer_neg_helper; \ + /* R3 != 0 on success */ \ + addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \ + ld r0, 16(r1); \ + ld r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \ + ld r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \ + mtlr r0; \ + cmpldi r3, 0; \ + beq bpf_error_slow; /* cr0 = EQ */ \ + mr r_addr, r3; \ + ld r_skb, (BPF_PPC_STACKFRAME+48)(r1); \ + /* Great success! */ + +bpf_slow_path_word_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_word_negative_offset +sk_load_word_negative_offset: + sk_negative_common(4) + lwz r_A, 0(r_addr) + blr + +bpf_slow_path_half_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_half_negative_offset +sk_load_half_negative_offset: + sk_negative_common(2) + lhz r_A, 0(r_addr) + blr + +bpf_slow_path_byte_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_byte_negative_offset +sk_load_byte_negative_offset: + sk_negative_common(1) + lbz r_A, 0(r_addr) + blr + +bpf_slow_path_byte_msh_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_byte_msh_negative_offset +sk_load_byte_msh_negative_offset: + sk_negative_common(1) + lbz r_X, 0(r_addr) + rlwinm r_X, r_X, 2, 32-4-2, 31-2 + blr + +bpf_error_slow: + /* fabricate a cr0 = lt */ + li r_scratch1, -1 + cmpdi r_scratch1, 0 +bpf_error: + /* Entered with cr0 = lt */ + li r3, 0 + /* Generated code will 'blt epilogue', returning 0. */ + blr diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index 73619d3aeb6c..2dc8b1484845 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -127,6 +127,9 @@ static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx) PPC_BLR(); } +#define CHOOSE_LOAD_FUNC(K, func) \ + ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset) + /* Assemble the body code between the prologue & epilogue. */ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, struct codegen_context *ctx, @@ -391,21 +394,16 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, /*** Absolute loads from packet header/data ***/ case BPF_S_LD_W_ABS: - func = sk_load_word; + func = CHOOSE_LOAD_FUNC(K, sk_load_word); goto common_load; case BPF_S_LD_H_ABS: - func = sk_load_half; + func = CHOOSE_LOAD_FUNC(K, sk_load_half); goto common_load; case BPF_S_LD_B_ABS: - func = sk_load_byte; + func = CHOOSE_LOAD_FUNC(K, sk_load_byte); common_load: - /* - * Load from [K]. Reference with the (negative) - * SKF_NET_OFF/SKF_LL_OFF offsets is unsupported. - */ + /* Load from [K]. */ ctx->seen |= SEEN_DATAREF; - if ((int)K < 0) - return -ENOTSUPP; PPC_LI64(r_scratch1, func); PPC_MTLR(r_scratch1); PPC_LI32(r_addr, K); @@ -429,7 +427,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, common_load_ind: /* * Load from [X + K]. Negative offsets are tested for - * in the helper functions, and result in a 'ret 0'. + * in the helper functions. */ ctx->seen |= SEEN_DATAREF | SEEN_XREG; PPC_LI64(r_scratch1, func); @@ -443,13 +441,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, break; case BPF_S_LDX_B_MSH: - /* - * x86 version drops packet (RET 0) when K<0, whereas - * interpreter does allow K<0 (__load_pointer, special - * ancillary data). common_load returns ENOTSUPP if K<0, - * so we fall back to interpreter & filter works. - */ - func = sk_load_byte_msh; + func = CHOOSE_LOAD_FUNC(K, sk_load_byte_msh); goto common_load; break; diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 02aee03e713c..8f84bcba18da 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1299,8 +1299,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val, if (record) { struct perf_sample_data data; - perf_sample_data_init(&data, ~0ULL); - data.period = event->hw.last_period; + perf_sample_data_init(&data, ~0ULL, event->hw.last_period); if (event->attr.sample_type & PERF_SAMPLE_ADDR) perf_get_data_addr(regs, &data.addr); diff --git a/arch/powerpc/perf/core-fsl-emb.c b/arch/powerpc/perf/core-fsl-emb.c index 0a6d2a9d569c..106c53354675 100644 --- a/arch/powerpc/perf/core-fsl-emb.c +++ b/arch/powerpc/perf/core-fsl-emb.c @@ -613,8 +613,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val, if (record) { struct perf_sample_data data; - perf_sample_data_init(&data, 0); - data.period = event->hw.last_period; + perf_sample_data_init(&data, 0, event->hw.last_period); if (perf_event_overflow(event, &data, regs)) fsl_emb_pmu_stop(event, 0); diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 2e4e64abfab4..8abf6fb8f410 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -23,6 +23,8 @@ config BLUESTONE default n select PPC44x_SIMPLE select APM821xx + select PCI_MSI + select PPC4xx_MSI select PPC4xx_PCI_EXPRESS select IBM_EMAC_RGMII help diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c index bfb11e01133e..e2d401ad8fbb 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -93,7 +93,7 @@ struct mpc52xx_pci { }; /* MPC5200 device tree match tables */ -const struct of_device_id mpc52xx_pci_ids[] __initdata = { +const struct of_device_id mpc52xx_pci_ids[] __initconst = { { .type = "pci", .compatible = "fsl,mpc5200-pci", }, { .type = "pci", .compatible = "mpc5200-pci", }, {} diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c index 9fef5302adc1..67dac22b4363 100644 --- a/arch/powerpc/platforms/85xx/common.c +++ b/arch/powerpc/platforms/85xx/common.c @@ -21,6 +21,12 @@ static struct of_device_id __initdata mpc85xx_common_ids[] = { { .compatible = "fsl,qe", }, { .compatible = "fsl,cpm2", }, { .compatible = "fsl,srio", }, + /* So that the DMA channel nodes can be probed individually: */ + { .compatible = "fsl,eloplus-dma", }, + /* For the PMC driver */ + { .compatible = "fsl,mpc8548-guts", }, + /* Probably unnecessary? */ + { .compatible = "gpio-leds", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 3754ddc00af7..d208ebccb91c 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -270,7 +270,7 @@ static void __init mpc85xx_mds_qe_init(void) if (machine_is(p1021_mds)) { - struct ccsr_guts_85xx __iomem *guts; + struct ccsr_guts __iomem *guts; np = of_find_node_by_name(NULL, "global-utilities"); if (np) { @@ -399,12 +399,6 @@ static int __init board_fixups(void) machine_arch_initcall(mpc8568_mds, board_fixups); machine_arch_initcall(mpc8569_mds, board_fixups); -static struct of_device_id mpc85xx_ids[] = { - { .compatible = "fsl,mpc8548-guts", }, - { .compatible = "gpio-leds", }, - {}, -}; - static int __init mpc85xx_publish_devices(void) { if (machine_is(mpc8568_mds)) @@ -412,10 +406,7 @@ static int __init mpc85xx_publish_devices(void) if (machine_is(mpc8569_mds)) simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio"); - mpc85xx_common_publish_devices(); - of_platform_bus_probe(NULL, mpc85xx_ids, NULL); - - return 0; + return mpc85xx_common_publish_devices(); } machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index 9848f9e39853..313fce4f5574 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -127,7 +127,7 @@ static void __init mpc85xx_rdb_setup_arch(void) #if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) if (machine_is(p1025_rdb)) { - struct ccsr_guts_85xx __iomem *guts; + struct ccsr_guts __iomem *guts; np = of_find_node_by_name(NULL, "global-utilities"); if (np) { diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index 0fe88e39945e..f700c81a1321 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -150,7 +150,7 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) { struct device_node *guts_node; struct device_node *indirect_node = NULL; - struct ccsr_guts_85xx __iomem *guts; + struct ccsr_guts __iomem *guts; u8 __iomem *lbc_lcs0_ba = NULL; u8 __iomem *lbc_lcs1_ba = NULL; u8 b; @@ -269,7 +269,7 @@ exit: void p1022ds_set_pixel_clock(unsigned int pixclock) { struct device_node *guts_np = NULL; - struct ccsr_guts_85xx __iomem *guts; + struct ccsr_guts __iomem *guts; unsigned long freq; u64 temp; u32 pxclk; @@ -460,18 +460,7 @@ static void __init p1022_ds_setup_arch(void) pr_info("Freescale P1022 DS reference board\n"); } -static struct of_device_id __initdata p1022_ds_ids[] = { - /* So that the DMA channel nodes can be probed individually: */ - { .compatible = "fsl,eloplus-dma", }, - {}, -}; - -static int __init p1022_ds_publish_devices(void) -{ - mpc85xx_common_publish_devices(); - return of_platform_bus_probe(NULL, p1022_ds_ids, NULL); -} -machine_device_initcall(p1022_ds, p1022_ds_publish_devices); +machine_device_initcall(p1022_ds, mpc85xx_common_publish_devices); machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier); diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index bbc615206c67..62cd3c555bfb 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -225,7 +225,7 @@ void mpc8610hpcd_set_monitor_port(enum fsl_diu_monitor_port port) void mpc8610hpcd_set_pixel_clock(unsigned int pixclock) { struct device_node *guts_np = NULL; - struct ccsr_guts_86xx __iomem *guts; + struct ccsr_guts __iomem *guts; unsigned long freq; u64 temp; u32 pxclk; diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 425db18580a2..61c9550819a2 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -78,6 +78,36 @@ config PPC_BOOK3E_64 endchoice +choice + prompt "CPU selection" + depends on PPC64 + default GENERIC_CPU + help + This will create a kernel which is optimised for a particular CPU. + The resulting kernel may not run on other CPUs, so use this with care. + + If unsure, select Generic. + +config GENERIC_CPU + bool "Generic" + +config CELL_CPU + bool "Cell Broadband Engine" + +config POWER4_CPU + bool "POWER4" + +config POWER5_CPU + bool "POWER5" + +config POWER6_CPU + bool "POWER6" + +config POWER7_CPU + bool "POWER7" + +endchoice + config PPC_BOOK3S def_bool y depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 @@ -86,15 +116,6 @@ config PPC_BOOK3E def_bool y depends on PPC_BOOK3E_64 -config POWER4_ONLY - bool "Optimize for POWER4" - depends on PPC64 && PPC_BOOK3S - default n - ---help--- - Cause the compiler to optimize for POWER4/POWER5/PPC970 processors. - The resulting binary will not work on POWER3 or RS64 processors - when compiled with binutils 2.15 or later. - config 6xx def_bool y depends on PPC32 && PPC_BOOK3S @@ -258,7 +279,7 @@ config PPC_ICSWX_PID default y ---help--- The PID register in server is used explicitly for ICSWX. In - embedded systems PID managment is done by the system. + embedded systems PID management is done by the system. config PPC_ICSWX_USE_SIGILL bool "Should a bad CT cause a SIGILL?" @@ -266,7 +287,7 @@ config PPC_ICSWX_USE_SIGILL default n ---help--- Should a bad CT used for "non-record form ICSWX" cause an - illegal intruction signal or should it be silent as + illegal instruction signal or should it be silent as architected. If in doubt, say N here. diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index db360fc4cf0e..85825b5401e5 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -114,7 +114,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) pr_devel("axon_msi: woff %x roff %x msi %x\n", write_offset, msic->read_offset, msi); - if (msi < NR_IRQS && irq_get_chip_data(msi) == msic) { + if (msi < nr_irqs && irq_get_chip_data(msi) == msic) { generic_handle_irq(msi); msic->fifo_virt[idx] = cpu_to_le32(0xffffffff); } else { @@ -276,9 +276,6 @@ static int axon_msi_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) if (rc) return rc; - /* We rely on being able to stash a virq in a u16 */ - BUILD_BUG_ON(NR_IRQS > 65536); - list_for_each_entry(entry, &dev->msi_list, list) { virq = irq_create_direct_mapping(msic->irq_domain); if (virq == NO_IRQ) { @@ -392,7 +389,8 @@ static int axon_msi_probe(struct platform_device *device) } memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES); - msic->irq_domain = irq_domain_add_nomap(dn, &msic_host_ops, msic); + /* We rely on being able to stash a virq in a u16, so limit irqs to < 65536 */ + msic->irq_domain = irq_domain_add_nomap(dn, 65536, &msic_host_ops, msic); if (!msic->irq_domain) { printk(KERN_ERR "axon_msi: couldn't allocate irq_domain for %s\n", dn->full_name); diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c index e5c3a2c6090d..8c6dc42ecf65 100644 --- a/arch/powerpc/platforms/cell/beat_interrupt.c +++ b/arch/powerpc/platforms/cell/beat_interrupt.c @@ -239,7 +239,7 @@ void __init beatic_init_IRQ(void) ppc_md.get_irq = beatic_get_irq; /* Allocate an irq host */ - beatic_host = irq_domain_add_nomap(NULL, &beatic_pic_host_ops, NULL); + beatic_host = irq_domain_add_nomap(NULL, 0, &beatic_pic_host_ops, NULL); BUG_ON(beatic_host == NULL); irq_set_default_host(beatic_host); } @@ -248,6 +248,6 @@ void beatic_deinit_IRQ(void) { int i; - for (i = 1; i < NR_IRQS; i++) + for (i = 1; i < nr_irqs; i++) beat_destruct_irq_plug(i); } diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index ae9fc7bc17d6..b9f509a34c01 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -564,7 +564,8 @@ static struct iommu_table *cell_get_iommu_table(struct device *dev) /* A coherent allocation implies strong ordering */ static void *dma_fixed_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) { if (iommu_fixed_is_weak) return iommu_alloc_coherent(dev, cell_get_iommu_table(dev), @@ -572,18 +573,19 @@ static void *dma_fixed_alloc_coherent(struct device *dev, size_t size, device_to_mask(dev), flag, dev_to_node(dev)); else - return dma_direct_ops.alloc_coherent(dev, size, dma_handle, - flag); + return dma_direct_ops.alloc(dev, size, dma_handle, flag, + attrs); } static void dma_fixed_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs) { if (iommu_fixed_is_weak) iommu_free_coherent(cell_get_iommu_table(dev), size, vaddr, dma_handle); else - dma_direct_ops.free_coherent(dev, size, vaddr, dma_handle); + dma_direct_ops.free(dev, size, vaddr, dma_handle, attrs); } static dma_addr_t dma_fixed_map_page(struct device *dev, struct page *page, @@ -642,8 +644,8 @@ static int dma_fixed_dma_supported(struct device *dev, u64 mask) static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask); struct dma_map_ops dma_iommu_fixed_ops = { - .alloc_coherent = dma_fixed_alloc_coherent, - .free_coherent = dma_fixed_free_coherent, + .alloc = dma_fixed_alloc_coherent, + .free = dma_fixed_free_coherent, .map_sg = dma_fixed_map_sg, .unmap_sg = dma_fixed_unmap_sg, .dma_supported = dma_fixed_dma_supported, diff --git a/arch/powerpc/platforms/cell/qpace_setup.c b/arch/powerpc/platforms/cell/qpace_setup.c index 7f9b6742f8b6..6e3409d590ac 100644 --- a/arch/powerpc/platforms/cell/qpace_setup.c +++ b/arch/powerpc/platforms/cell/qpace_setup.c @@ -61,7 +61,7 @@ static void qpace_progress(char *s, unsigned short hex) printk("*** %04x : %s\n", hex, s ? s : ""); } -static const struct of_device_id qpace_bus_ids[] __initdata = { +static const struct of_device_id qpace_bus_ids[] __initconst = { { .type = "soc", }, { .compatible = "soc", }, { .type = "spider", }, diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index fa3e294fd343..4ab087671185 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -140,7 +140,7 @@ static int __devinit cell_setup_phb(struct pci_controller *phb) return 0; } -static const struct of_device_id cell_bus_ids[] __initdata = { +static const struct of_device_id cell_bus_ids[] __initconst = { { .type = "soc", }, { .compatible = "soc", }, { .type = "spider", }, diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index 996c5ff7824b..fc536f2971c0 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -366,11 +366,20 @@ static void kw_i2c_timeout(unsigned long data) unsigned long flags; spin_lock_irqsave(&host->lock, flags); + + /* + * If the timer is pending, that means we raced with the + * irq, in which case we just return + */ + if (timer_pending(&host->timeout_timer)) + goto skip; + kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr)); if (host->state != state_idle) { host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT; add_timer(&host->timeout_timer); } + skip: spin_unlock_irqrestore(&host->lock, flags); } @@ -1494,6 +1503,7 @@ static int __init pmac_i2c_create_platform_devices(void) if (bus->platform_dev == NULL) return -ENOMEM; bus->platform_dev->dev.platform_data = bus; + bus->platform_dev->dev.of_node = bus->busnode; platform_device_add(bus->platform_dev); } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 66ad93de1d55..c4e630576ff2 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -57,9 +57,9 @@ static int max_real_irqs; static DEFINE_RAW_SPINLOCK(pmac_pic_lock); -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; -static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +/* The max irq number this driver deals with is 128; see max_irqs */ +static DECLARE_BITMAP(ppc_lost_interrupts, 128); +static DECLARE_BITMAP(ppc_cached_irq_mask, 128); static int pmac_irq_cascade = -1; static struct irq_domain *pmac_pic_host; diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index a81e5a88fbdf..b4ddaa3fbb29 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -192,7 +192,7 @@ static int psurge_secondary_ipi_init(void) { int rc = -ENOMEM; - psurge_host = irq_domain_add_nomap(NULL, &psurge_host_ops, NULL); + psurge_host = irq_domain_add_nomap(NULL, 0, &psurge_host_ops, NULL); if (psurge_host) psurge_secondary_virq = irq_create_direct_mapping(psurge_host); diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index 476d9d9b2405..46b7f0232523 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -7,7 +7,6 @@ config PPC_PS3 select USB_OHCI_BIG_ENDIAN_MMIO select USB_ARCH_HAS_EHCI select USB_EHCI_BIG_ENDIAN_MMIO - select MEMORY_HOTPLUG select PPC_PCI_CHOICE help This option enables support for the Sony PS3 game console @@ -74,7 +73,7 @@ config PS3_PS3AV help Include support for the PS3 AV Settings driver. - This support is required for graphics and sound. In + This support is required for PS3 graphics and sound. In general, all users will say Y or M. config PS3_SYS_MANAGER @@ -85,9 +84,22 @@ config PS3_SYS_MANAGER help Include support for the PS3 System Manager. - This support is required for system control. In + This support is required for PS3 system control. In general, all users will say Y or M. +config PS3_REPOSITORY_WRITE + bool "PS3 Repository write support" if PS3_ADVANCED + depends on PPC_PS3 + default n + help + Enables support for writing to the PS3 System Repository. + + This support is intended for bootloaders that need to store data + in the repository for later boot stages. + + If in doubt, say N here and reduce the size of the kernel by a + small amount. + config PS3_STORAGE depends on PPC_PS3 tristate @@ -122,7 +134,7 @@ config PS3_FLASH This support is required to access the PS3 FLASH ROM, which contains the boot loader and some boot options. - In general, all users will say Y or M. + In general, PS3 OtherOS users will say Y or M. As this driver needs a fixed buffer of 256 KiB of memory, it can be disabled on the kernel command line using "ps3flash=off", to @@ -156,7 +168,7 @@ config PS3GELIC_UDBG via the Ethernet port (UDP port number 18194). This driver uses a trivial implementation and is independent - from the main network driver. + from the main PS3 gelic network driver. If in doubt, say N here. diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 2a4ff86cc21f..5f3b23220b8e 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -753,9 +753,8 @@ void __init ps3_init_IRQ(void) unsigned cpu; struct irq_domain *host; - host = irq_domain_add_nomap(NULL, &ps3_host_ops, NULL); + host = irq_domain_add_nomap(NULL, PS3_PLUG_MAX + 1, &ps3_host_ops, NULL); irq_set_default_host(host); - irq_set_virq_count(PS3_PLUG_MAX + 1); for_each_possible_cpu(cpu) { struct ps3_private *pd = &per_cpu(ps3_private, cpu); diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index de2aea421707..0c9f643d9e2a 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -20,7 +20,6 @@ #include <linux/kernel.h> #include <linux/export.h> -#include <linux/memory_hotplug.h> #include <linux/memblock.h> #include <linux/slab.h> @@ -79,12 +78,14 @@ enum { * @base: base address * @size: size in bytes * @offset: difference between base and rm.size + * @destroy: flag if region should be destroyed upon shutdown */ struct mem_region { u64 base; u64 size; unsigned long offset; + int destroy; }; /** @@ -96,7 +97,7 @@ struct mem_region { * The HV virtual address space (vas) allows for hotplug memory regions. * Memory regions can be created and destroyed in the vas at runtime. * @rm: real mode (bootmem) region - * @r1: hotplug memory region(s) + * @r1: highmem region(s) * * ps3 addresses * virt_addr: a cpu 'translated' effective address @@ -222,10 +223,6 @@ void ps3_mm_vas_destroy(void) } } -/*============================================================================*/ -/* memory hotplug routines */ -/*============================================================================*/ - /** * ps3_mm_region_create - create a memory region in the vas * @r: pointer to a struct mem_region to accept initialized values @@ -262,6 +259,7 @@ static int ps3_mm_region_create(struct mem_region *r, unsigned long size) goto zero_region; } + r->destroy = 1; r->offset = r->base - map.rm.size; return result; @@ -279,7 +277,14 @@ static void ps3_mm_region_destroy(struct mem_region *r) { int result; + if (!r->destroy) { + pr_info("%s:%d: Not destroying high region: %llxh %llxh\n", + __func__, __LINE__, r->base, r->size); + return; + } + DBG("%s:%d: r->base = %llxh\n", __func__, __LINE__, r->base); + if (r->base) { result = lv1_release_memory(r->base); BUG_ON(result); @@ -288,50 +293,36 @@ static void ps3_mm_region_destroy(struct mem_region *r) } } -/** - * ps3_mm_add_memory - hot add memory - */ - -static int __init ps3_mm_add_memory(void) +static int ps3_mm_get_repository_highmem(struct mem_region *r) { int result; - unsigned long start_addr; - unsigned long start_pfn; - unsigned long nr_pages; - - if (!firmware_has_feature(FW_FEATURE_PS3_LV1)) - return -ENODEV; - BUG_ON(!mem_init_done); + /* Assume a single highmem region. */ - start_addr = map.rm.size; - start_pfn = start_addr >> PAGE_SHIFT; - nr_pages = (map.r1.size + PAGE_SIZE - 1) >> PAGE_SHIFT; + result = ps3_repository_read_highmem_info(0, &r->base, &r->size); - DBG("%s:%d: start_addr %lxh, start_pfn %lxh, nr_pages %lxh\n", - __func__, __LINE__, start_addr, start_pfn, nr_pages); - - result = add_memory(0, start_addr, map.r1.size); + if (result) + goto zero_region; - if (result) { - pr_err("%s:%d: add_memory failed: (%d)\n", - __func__, __LINE__, result); - return result; + if (!r->base || !r->size) { + result = -1; + goto zero_region; } - memblock_add(start_addr, map.r1.size); + r->offset = r->base - map.rm.size; - result = online_pages(start_pfn, nr_pages); + DBG("%s:%d: Found high region in repository: %llxh %llxh\n", + __func__, __LINE__, r->base, r->size); - if (result) - pr_err("%s:%d: online_pages failed: (%d)\n", - __func__, __LINE__, result); + return 0; +zero_region: + DBG("%s:%d: No high region in repository.\n", __func__, __LINE__); + + r->size = r->base = r->offset = 0; return result; } -device_initcall(ps3_mm_add_memory); - /*============================================================================*/ /* dma routines */ /*============================================================================*/ @@ -1217,13 +1208,23 @@ void __init ps3_mm_init(void) BUG_ON(map.rm.base); BUG_ON(!map.rm.size); + /* Check if we got the highmem region from an earlier boot step */ - /* arrange to do this in ps3_mm_add_memory */ - ps3_mm_region_create(&map.r1, map.total - map.rm.size); + if (ps3_mm_get_repository_highmem(&map.r1)) + ps3_mm_region_create(&map.r1, map.total - map.rm.size); /* correct map.total for the real total amount of memory we use */ map.total = map.rm.size + map.r1.size; + if (!map.r1.size) { + DBG("%s:%d: No highmem region found\n", __func__, __LINE__); + } else { + DBG("%s:%d: Adding highmem region: %llxh %llxh\n", + __func__, __LINE__, map.rm.size, + map.total - map.rm.size); + memblock_add(map.rm.size, map.total - map.rm.size); + } + DBG(" <- %s:%d\n", __func__, __LINE__); } diff --git a/arch/powerpc/platforms/ps3/platform.h b/arch/powerpc/platforms/ps3/platform.h index 1a633ed0fe98..d71329a8e325 100644 --- a/arch/powerpc/platforms/ps3/platform.h +++ b/arch/powerpc/platforms/ps3/platform.h @@ -188,6 +188,22 @@ int ps3_repository_read_rm_size(unsigned int ppe_id, u64 *rm_size); int ps3_repository_read_region_total(u64 *region_total); int ps3_repository_read_mm_info(u64 *rm_base, u64 *rm_size, u64 *region_total); +int ps3_repository_read_highmem_region_count(unsigned int *region_count); +int ps3_repository_read_highmem_base(unsigned int region_index, + u64 *highmem_base); +int ps3_repository_read_highmem_size(unsigned int region_index, + u64 *highmem_size); +int ps3_repository_read_highmem_info(unsigned int region_index, + u64 *highmem_base, u64 *highmem_size); + +int ps3_repository_write_highmem_region_count(unsigned int region_count); +int ps3_repository_write_highmem_base(unsigned int region_index, + u64 highmem_base); +int ps3_repository_write_highmem_size(unsigned int region_index, + u64 highmem_size); +int ps3_repository_write_highmem_info(unsigned int region_index, + u64 highmem_base, u64 highmem_size); +int ps3_repository_delete_highmem_info(unsigned int region_index); /* repository pme info */ diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c index 7bdfea336f5e..9b47ba7a5de7 100644 --- a/arch/powerpc/platforms/ps3/repository.c +++ b/arch/powerpc/platforms/ps3/repository.c @@ -779,6 +779,72 @@ int ps3_repository_read_mm_info(u64 *rm_base, u64 *rm_size, u64 *region_total) } /** + * ps3_repository_read_highmem_region_count - Read the number of highmem regions + * + * Bootloaders must arrange the repository nodes such that regions are indexed + * with a region_index from 0 to region_count-1. + */ + +int ps3_repository_read_highmem_region_count(unsigned int *region_count) +{ + int result; + u64 v1 = 0; + + result = read_node(PS3_LPAR_ID_CURRENT, + make_first_field("highmem", 0), + make_field("region", 0), + make_field("count", 0), + 0, + &v1, NULL); + *region_count = v1; + return result; +} + + +int ps3_repository_read_highmem_base(unsigned int region_index, + u64 *highmem_base) +{ + return read_node(PS3_LPAR_ID_CURRENT, + make_first_field("highmem", 0), + make_field("region", region_index), + make_field("base", 0), + 0, + highmem_base, NULL); +} + +int ps3_repository_read_highmem_size(unsigned int region_index, + u64 *highmem_size) +{ + return read_node(PS3_LPAR_ID_CURRENT, + make_first_field("highmem", 0), + make_field("region", region_index), + make_field("size", 0), + 0, + highmem_size, NULL); +} + +/** + * ps3_repository_read_highmem_info - Read high memory region info + * @region_index: Region index, {0,..,region_count-1}. + * @highmem_base: High memory base address. + * @highmem_size: High memory size. + * + * Bootloaders that preallocate highmem regions must place the + * region info into the repository at these well known nodes. + */ + +int ps3_repository_read_highmem_info(unsigned int region_index, + u64 *highmem_base, u64 *highmem_size) +{ + int result; + + *highmem_base = 0; + result = ps3_repository_read_highmem_base(region_index, highmem_base); + return result ? result + : ps3_repository_read_highmem_size(region_index, highmem_size); +} + +/** * ps3_repository_read_num_spu_reserved - Number of physical spus reserved. * @num_spu: Number of physical spus. */ @@ -1002,6 +1068,138 @@ int ps3_repository_read_lpm_privileges(unsigned int be_index, u64 *lpar, lpar, rights); } +#if defined(CONFIG_PS3_REPOSITORY_WRITE) + +static int create_node(u64 n1, u64 n2, u64 n3, u64 n4, u64 v1, u64 v2) +{ + int result; + + dump_node(0, n1, n2, n3, n4, v1, v2); + + result = lv1_create_repository_node(n1, n2, n3, n4, v1, v2); + + if (result) { + pr_devel("%s:%d: lv1_create_repository_node failed: %s\n", + __func__, __LINE__, ps3_result(result)); + return -ENOENT; + } + + return 0; +} + +static int delete_node(u64 n1, u64 n2, u64 n3, u64 n4) +{ + int result; + + dump_node(0, n1, n2, n3, n4, 0, 0); + + result = lv1_delete_repository_node(n1, n2, n3, n4); + + if (result) { + pr_devel("%s:%d: lv1_delete_repository_node failed: %s\n", + __func__, __LINE__, ps3_result(result)); + return -ENOENT; + } + + return 0; +} + +static int write_node(u64 n1, u64 n2, u64 n3, u64 n4, u64 v1, u64 v2) +{ + int result; + + result = create_node(n1, n2, n3, n4, v1, v2); + + if (!result) + return 0; + + result = lv1_write_repository_node(n1, n2, n3, n4, v1, v2); + + if (result) { + pr_devel("%s:%d: lv1_write_repository_node failed: %s\n", + __func__, __LINE__, ps3_result(result)); + return -ENOENT; + } + + return 0; +} + +int ps3_repository_write_highmem_region_count(unsigned int region_count) +{ + int result; + u64 v1 = (u64)region_count; + + result = write_node( + make_first_field("highmem", 0), + make_field("region", 0), + make_field("count", 0), + 0, + v1, 0); + return result; +} + +int ps3_repository_write_highmem_base(unsigned int region_index, + u64 highmem_base) +{ + return write_node( + make_first_field("highmem", 0), + make_field("region", region_index), + make_field("base", 0), + 0, + highmem_base, 0); +} + +int ps3_repository_write_highmem_size(unsigned int region_index, + u64 highmem_size) +{ + return write_node( + make_first_field("highmem", 0), + make_field("region", region_index), + make_field("size", 0), + 0, + highmem_size, 0); +} + +int ps3_repository_write_highmem_info(unsigned int region_index, + u64 highmem_base, u64 highmem_size) +{ + int result; + + result = ps3_repository_write_highmem_base(region_index, highmem_base); + return result ? result + : ps3_repository_write_highmem_size(region_index, highmem_size); +} + +static int ps3_repository_delete_highmem_base(unsigned int region_index) +{ + return delete_node( + make_first_field("highmem", 0), + make_field("region", region_index), + make_field("base", 0), + 0); +} + +static int ps3_repository_delete_highmem_size(unsigned int region_index) +{ + return delete_node( + make_first_field("highmem", 0), + make_field("region", region_index), + make_field("size", 0), + 0); +} + +int ps3_repository_delete_highmem_info(unsigned int region_index) +{ + int result; + + result = ps3_repository_delete_highmem_base(region_index); + result += ps3_repository_delete_highmem_size(region_index); + + return result ? -1 : 0; +} + +#endif /* defined(CONFIG_PS3_WRITE_REPOSITORY) */ + #if defined(DEBUG) int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo) diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index 880eb9ce22c5..5606fe36faf2 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -515,7 +515,8 @@ core_initcall(ps3_system_bus_init); * to the dma address (mapping) of the first page. */ static void * ps3_alloc_coherent(struct device *_dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) { int result; struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev); @@ -552,7 +553,7 @@ clean_none: } static void ps3_free_coherent(struct device *_dev, size_t size, void *vaddr, - dma_addr_t dma_handle) + dma_addr_t dma_handle, struct dma_attrs *attrs) { struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev); @@ -701,8 +702,8 @@ static u64 ps3_dma_get_required_mask(struct device *_dev) } static struct dma_map_ops ps3_sb_dma_ops = { - .alloc_coherent = ps3_alloc_coherent, - .free_coherent = ps3_free_coherent, + .alloc = ps3_alloc_coherent, + .free = ps3_free_coherent, .map_sg = ps3_sb_map_sg, .unmap_sg = ps3_sb_unmap_sg, .dma_supported = ps3_dma_supported, @@ -712,8 +713,8 @@ static struct dma_map_ops ps3_sb_dma_ops = { }; static struct dma_map_ops ps3_ioc0_dma_ops = { - .alloc_coherent = ps3_alloc_coherent, - .free_coherent = ps3_free_coherent, + .alloc = ps3_alloc_coherent, + .free = ps3_free_coherent, .map_sg = ps3_ioc0_map_sg, .unmap_sg = ps3_ioc0_unmap_sg, .dma_supported = ps3_dma_supported, diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index aadbe4f6d537..837cf49357ed 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -30,9 +30,9 @@ config PPC_SPLPAR two or more partitions. config EEH - bool "PCI Extended Error Handling (EEH)" if EXPERT + bool depends on PPC_PSERIES && PCI - default y if !EXPERT + default y config PSERIES_MSI bool @@ -67,7 +67,7 @@ config IO_EVENT_IRQ This option will only enable the IO event platform code. You will still need to enable or compile the actual drivers - that use this infrastruture to handle IO event interrupts. + that use this infrastructure to handle IO event interrupts. Say Y if you are unsure. diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 309d38ef7322..ecd394cf34e6 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -489,7 +489,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) * a stack trace will help the device-driver authors figure * out what happened. So print that out. */ - dump_stack(); + WARN(1, "EEH: failure detected\n"); return 1; dn_unlock: @@ -1076,7 +1076,7 @@ static void eeh_add_device_late(struct pci_dev *dev) pr_debug("EEH: Adding device %s\n", pci_name(dev)); dn = pci_device_to_OF_node(dev); - edev = pci_dev_to_eeh_dev(dev); + edev = of_node_to_eeh_dev(dn); if (edev->pdev == dev) { pr_debug("EEH: Already referenced !\n"); return; diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c index 4a4752565856..4cb375c0f8d1 100644 --- a/arch/powerpc/platforms/pseries/eeh_event.c +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -59,8 +59,7 @@ static int eeh_event_handler(void * dummy) struct eeh_event *event; struct eeh_dev *edev; - daemonize("eehd"); - set_current_state(TASK_INTERRUPTIBLE); + set_task_comm(current, "eehd"); spin_lock_irqsave(&eeh_eventlist_lock, flags); event = NULL; @@ -83,6 +82,7 @@ static int eeh_event_handler(void * dummy) printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n", eeh_pci_name(edev->pdev)); + set_current_state(TASK_INTERRUPTIBLE); /* Don't add to load average */ edev = handle_eeh_events(event); eeh_clear_slot(eeh_dev_to_of_node(edev), EEH_MODE_RECOVERING); diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h index 342797fc0f9c..13e8cc43adf7 100644 --- a/arch/powerpc/platforms/pseries/plpar_wrappers.h +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -22,12 +22,12 @@ static inline long poll_pending(void) static inline u8 get_cede_latency_hint(void) { - return get_lppaca()->gpr5_dword.fields.cede_latency_hint; + return get_lppaca()->cede_latency_hint; } static inline void set_cede_latency_hint(u8 latency_hint) { - get_lppaca()->gpr5_dword.fields.cede_latency_hint = latency_hint; + get_lppaca()->cede_latency_hint = latency_hint; } static inline long cede_processor(void) diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 168651acdd83..7b3bf76ef834 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -103,11 +103,13 @@ int pSeries_reconfig_notifier_register(struct notifier_block *nb) { return blocking_notifier_chain_register(&pSeries_reconfig_chain, nb); } +EXPORT_SYMBOL_GPL(pSeries_reconfig_notifier_register); void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { blocking_notifier_chain_unregister(&pSeries_reconfig_chain, nb); } +EXPORT_SYMBOL_GPL(pSeries_reconfig_notifier_unregister); int pSeries_reconfig_notify(unsigned long action, void *p) { @@ -426,6 +428,7 @@ static int do_remove_property(char *buf, size_t bufsize) static int do_update_property(char *buf, size_t bufsize) { struct device_node *np; + struct pSeries_reconfig_prop_update upd_value; unsigned char *value; char *name, *end, *next_prop; int rc, length; @@ -454,6 +457,10 @@ static int do_update_property(char *buf, size_t bufsize) return -ENODEV; } + upd_value.node = np; + upd_value.property = newprop; + pSeries_reconfig_notify(PSERIES_UPDATE_PROPERTY, &upd_value); + rc = prom_update_property(np, newprop, oldprop); if (rc) return rc; diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c index d3be961e2ae7..10386b676d87 100644 --- a/arch/powerpc/sysdev/cpm2_pic.c +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -51,8 +51,7 @@ static intctl_cpm2_t __iomem *cpm2_intctl; static struct irq_domain *cpm2_pic_host; -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +static unsigned long ppc_cached_irq_mask[2]; /* 2 32-bit registers */ static const u_char irq_to_siureg[] = { 1, 1, 1, 1, 1, 1, 1, 1, diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c index d5f5416be310..b724622c3a0b 100644 --- a/arch/powerpc/sysdev/mpc8xx_pic.c +++ b/arch/powerpc/sysdev/mpc8xx_pic.c @@ -18,69 +18,45 @@ extern int cpm_get_irq(struct pt_regs *regs); static struct irq_domain *mpc8xx_pic_host; -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +static unsigned long mpc8xx_cached_irq_mask; static sysconf8xx_t __iomem *siu_reg; -int cpm_get_irq(struct pt_regs *regs); +static inline unsigned long mpc8xx_irqd_to_bit(struct irq_data *d) +{ + return 0x80000000 >> irqd_to_hwirq(d); +} static void mpc8xx_unmask_irq(struct irq_data *d) { - int bit, word; - unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d); - - bit = irq_nr & 0x1f; - word = irq_nr >> 5; - - ppc_cached_irq_mask[word] |= (1 << (31-bit)); - out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]); + mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); } static void mpc8xx_mask_irq(struct irq_data *d) { - int bit, word; - unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d); - - bit = irq_nr & 0x1f; - word = irq_nr >> 5; - - ppc_cached_irq_mask[word] &= ~(1 << (31-bit)); - out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]); + mpc8xx_cached_irq_mask &= ~mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); } static void mpc8xx_ack(struct irq_data *d) { - int bit; - unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d); - - bit = irq_nr & 0x1f; - out_be32(&siu_reg->sc_sipend, 1 << (31-bit)); + out_be32(&siu_reg->sc_sipend, mpc8xx_irqd_to_bit(d)); } static void mpc8xx_end_irq(struct irq_data *d) { - int bit, word; - unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d); - - bit = irq_nr & 0x1f; - word = irq_nr >> 5; - - ppc_cached_irq_mask[word] |= (1 << (31-bit)); - out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]); + mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); } static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type) { - if (flow_type & IRQ_TYPE_EDGE_FALLING) { - irq_hw_number_t hw = (unsigned int)irqd_to_hwirq(d); + /* only external IRQ senses are programmable */ + if ((flow_type & IRQ_TYPE_EDGE_FALLING) && !(irqd_to_hwirq(d) & 1)) { unsigned int siel = in_be32(&siu_reg->sc_siel); - - /* only external IRQ senses are programmable */ - if ((hw & 1) == 0) { - siel |= (0x80000000 >> hw); - out_be32(&siu_reg->sc_siel, siel); - __irq_set_handler_locked(d->irq, handle_edge_irq); - } + siel |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_siel, siel); + __irq_set_handler_locked(d->irq, handle_edge_irq); } return 0; } @@ -132,6 +108,9 @@ static int mpc8xx_pic_host_xlate(struct irq_domain *h, struct device_node *ct, IRQ_TYPE_EDGE_FALLING, }; + if (intspec[0] > 0x1f) + return 0; + *out_hwirq = intspec[0]; if (intsize > 1 && intspec[1] < 4) *out_flags = map_pic_senses[intspec[1]]; diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 9ac71ebd2c40..395af1347749 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -604,18 +604,14 @@ static struct mpic *mpic_find(unsigned int irq) } /* Determine if the linux irq is an IPI */ -static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int irq) +static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int src) { - unsigned int src = virq_to_hw(irq); - return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]); } /* Determine if the linux irq is a timer */ -static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int irq) +static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int src) { - unsigned int src = virq_to_hw(irq); - return (src >= mpic->timer_vecs[0] && src <= mpic->timer_vecs[7]); } @@ -876,21 +872,45 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type) if (src >= mpic->num_sources) return -EINVAL; + vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); + + /* We don't support "none" type */ if (flow_type == IRQ_TYPE_NONE) - if (mpic->senses && src < mpic->senses_count) - flow_type = mpic->senses[src]; - if (flow_type == IRQ_TYPE_NONE) - flow_type = IRQ_TYPE_LEVEL_LOW; + flow_type = IRQ_TYPE_DEFAULT; + + /* Default: read HW settings */ + if (flow_type == IRQ_TYPE_DEFAULT) { + switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) | + MPIC_INFO(VECPRI_SENSE_MASK))) { + case MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE): + flow_type = IRQ_TYPE_EDGE_RISING; + break; + case MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE): + flow_type = IRQ_TYPE_EDGE_FALLING; + break; + case MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE): + flow_type = IRQ_TYPE_LEVEL_HIGH; + break; + case MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE): + flow_type = IRQ_TYPE_LEVEL_LOW; + break; + } + } + /* Apply to irq desc */ irqd_set_trigger_type(d, flow_type); + /* Apply to HW */ if (mpic_is_ht_interrupt(mpic, src)) vecpri = MPIC_VECPRI_POLARITY_POSITIVE | MPIC_VECPRI_SENSE_EDGE; else vecpri = mpic_type_to_vecpri(mpic, flow_type); - vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); vnew = vold & ~(MPIC_INFO(VECPRI_POLARITY_MASK) | MPIC_INFO(VECPRI_SENSE_MASK)); vnew |= vecpri; @@ -1026,7 +1046,7 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq, irq_set_chip_and_handler(virq, chip, handle_fasteoi_irq); /* Set default irq type */ - irq_set_irq_type(virq, IRQ_TYPE_NONE); + irq_set_irq_type(virq, IRQ_TYPE_DEFAULT); /* If the MPIC was reset, then all vectors have already been * initialized. Otherwise, a per source lazy initialization @@ -1417,12 +1437,6 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, mpic->num_sources = isu_first + mpic->isu_size; } -void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count) -{ - mpic->senses = senses; - mpic->senses_count = count; -} - void __init mpic_init(struct mpic *mpic) { int i, cpu; @@ -1555,12 +1569,12 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri) return; raw_spin_lock_irqsave(&mpic_lock, flags); - if (mpic_is_ipi(mpic, irq)) { + if (mpic_is_ipi(mpic, src)) { reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) & ~MPIC_VECPRI_PRIORITY_MASK; mpic_ipi_write(src - mpic->ipi_vecs[0], reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); - } else if (mpic_is_tm(mpic, irq)) { + } else if (mpic_is_tm(mpic, src)) { reg = mpic_tm_read(src - mpic->timer_vecs[0]) & ~MPIC_VECPRI_PRIORITY_MASK; mpic_tm_write(src - mpic->timer_vecs[0], diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c index 6e7fa386e76a..483d8fa72e8b 100644 --- a/arch/powerpc/sysdev/mpic_msgr.c +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -27,6 +27,7 @@ static struct mpic_msgr **mpic_msgrs; static unsigned int mpic_msgr_count; +static DEFINE_RAW_SPINLOCK(msgrs_lock); static inline void _mpic_msgr_mer_write(struct mpic_msgr *msgr, u32 value) { @@ -56,12 +57,11 @@ struct mpic_msgr *mpic_msgr_get(unsigned int reg_num) if (reg_num >= mpic_msgr_count) return ERR_PTR(-ENODEV); - raw_spin_lock_irqsave(&msgr->lock, flags); - if (mpic_msgrs[reg_num]->in_use == MSGR_FREE) { - msgr = mpic_msgrs[reg_num]; + raw_spin_lock_irqsave(&msgrs_lock, flags); + msgr = mpic_msgrs[reg_num]; + if (msgr->in_use == MSGR_FREE) msgr->in_use = MSGR_INUSE; - } - raw_spin_unlock_irqrestore(&msgr->lock, flags); + raw_spin_unlock_irqrestore(&msgrs_lock, flags); return msgr; } @@ -228,7 +228,7 @@ static __devinit int mpic_msgr_probe(struct platform_device *dev) reg_number = block_number * MPIC_MSGR_REGISTERS_PER_BLOCK + i; msgr->base = msgr_block_addr + i * MPIC_MSGR_STRIDE; - msgr->mer = msgr->base + MPIC_MSGR_MER_OFFSET; + msgr->mer = (u32 *)((u8 *)msgr->base + MPIC_MSGR_MER_OFFSET); msgr->in_use = MSGR_FREE; msgr->num = i; raw_spin_lock_init(&msgr->lock); diff --git a/arch/powerpc/sysdev/ppc4xx_msi.c b/arch/powerpc/sysdev/ppc4xx_msi.c index 1c2d7af17bbe..82c6702dcbab 100644 --- a/arch/powerpc/sysdev/ppc4xx_msi.c +++ b/arch/powerpc/sysdev/ppc4xx_msi.c @@ -28,10 +28,11 @@ #include <linux/of_platform.h> #include <linux/interrupt.h> #include <linux/export.h> +#include <linux/kernel.h> #include <asm/prom.h> #include <asm/hw_irq.h> #include <asm/ppc-pci.h> -#include <boot/dcr.h> +#include <asm/dcr.h> #include <asm/dcr-regs.h> #include <asm/msi_bitmap.h> @@ -43,13 +44,14 @@ #define PEIH_FLUSH0 0x30 #define PEIH_FLUSH1 0x38 #define PEIH_CNTRST 0x48 -#define NR_MSI_IRQS 4 + +static int msi_irqs; struct ppc4xx_msi { u32 msi_addr_lo; u32 msi_addr_hi; void __iomem *msi_regs; - int msi_virqs[NR_MSI_IRQS]; + int *msi_virqs; struct msi_bitmap bitmap; struct device_node *msi_dev; }; @@ -61,7 +63,7 @@ static int ppc4xx_msi_init_allocator(struct platform_device *dev, { int err; - err = msi_bitmap_alloc(&msi_data->bitmap, NR_MSI_IRQS, + err = msi_bitmap_alloc(&msi_data->bitmap, msi_irqs, dev->dev.of_node); if (err) return err; @@ -83,6 +85,11 @@ static int ppc4xx_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) struct msi_desc *entry; struct ppc4xx_msi *msi_data = &ppc4xx_msi; + msi_data->msi_virqs = kmalloc((msi_irqs) * sizeof(int), + GFP_KERNEL); + if (!msi_data->msi_virqs) + return -ENOMEM; + list_for_each_entry(entry, &dev->msi_list, list) { int_no = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1); if (int_no >= 0) @@ -150,12 +157,11 @@ static int ppc4xx_setup_pcieh_hw(struct platform_device *dev, if (!sdr_addr) return -1; - SDR0_WRITE(sdr_addr, (u64)res.start >> 32); /*HIGH addr */ - SDR0_WRITE(sdr_addr + 1, res.start & 0xFFFFFFFF); /* Low addr */ - + mtdcri(SDR0, *sdr_addr, upper_32_bits(res.start)); /*HIGH addr */ + mtdcri(SDR0, *sdr_addr + 1, lower_32_bits(res.start)); /* Low addr */ msi->msi_dev = of_find_node_by_name(NULL, "ppc4xx-msi"); - if (msi->msi_dev) + if (!msi->msi_dev) return -ENODEV; msi->msi_regs = of_iomap(msi->msi_dev, 0); @@ -167,9 +173,12 @@ static int ppc4xx_setup_pcieh_hw(struct platform_device *dev, (u32) (msi->msi_regs + PEIH_TERMADH), (u32) (msi->msi_regs)); msi_virt = dma_alloc_coherent(&dev->dev, 64, &msi_phys, GFP_KERNEL); - msi->msi_addr_hi = 0x0; - msi->msi_addr_lo = (u32) msi_phys; - dev_dbg(&dev->dev, "PCIE-MSI: msi address 0x%x\n", msi->msi_addr_lo); + if (!msi_virt) + return -ENOMEM; + msi->msi_addr_hi = upper_32_bits(msi_phys); + msi->msi_addr_lo = lower_32_bits(msi_phys & 0xffffffff); + dev_dbg(&dev->dev, "PCIE-MSI: msi address high 0x%x, low 0x%x\n", + msi->msi_addr_hi, msi->msi_addr_lo); /* Progam the Interrupt handler Termination addr registers */ out_be32(msi->msi_regs + PEIH_TERMADH, msi->msi_addr_hi); @@ -185,6 +194,8 @@ static int ppc4xx_setup_pcieh_hw(struct platform_device *dev, out_be32(msi->msi_regs + PEIH_MSIED, *msi_data); out_be32(msi->msi_regs + PEIH_MSIMK, *msi_mask); + dma_free_coherent(&dev->dev, 64, msi_virt, msi_phys); + return 0; } @@ -194,7 +205,7 @@ static int ppc4xx_of_msi_remove(struct platform_device *dev) int i; int virq; - for (i = 0; i < NR_MSI_IRQS; i++) { + for (i = 0; i < msi_irqs; i++) { virq = msi->msi_virqs[i]; if (virq != NO_IRQ) irq_dispose_mapping(virq); @@ -215,8 +226,6 @@ static int __devinit ppc4xx_msi_probe(struct platform_device *dev) struct resource res; int err = 0; - msi = &ppc4xx_msi;/*keep the msi data for further use*/ - dev_dbg(&dev->dev, "PCIE-MSI: Setting up MSI support...\n"); msi = kzalloc(sizeof(struct ppc4xx_msi), GFP_KERNEL); @@ -234,6 +243,10 @@ static int __devinit ppc4xx_msi_probe(struct platform_device *dev) goto error_out; } + msi_irqs = of_irq_count(dev->dev.of_node); + if (!msi_irqs) + return -ENODEV; + if (ppc4xx_setup_pcieh_hw(dev, res, msi)) goto error_out; @@ -242,6 +255,7 @@ static int __devinit ppc4xx_msi_probe(struct platform_device *dev) dev_err(&dev->dev, "Error allocating MSI bitmap\n"); goto error_out; } + ppc4xx_msi = *msi; ppc_md.setup_msi_irqs = ppc4xx_setup_msi_irqs; ppc_md.teardown_msi_irqs = ppc4xx_teardown_msi_irqs; diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index ceb09cbd2329..818e763f8265 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * Copyright (C) 2006-2010 Freescale Semicondutor, Inc. All rights reserved. * * Authors: Shlomi Gridish <gridish@freescale.com> * Li Yang <leoli@freescale.com> @@ -266,7 +266,19 @@ EXPORT_SYMBOL(qe_clock_source); static void qe_snums_init(void) { int i; - static const u8 snum_init[] = { + static const u8 snum_init_76[] = { + 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, + 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, + 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, + 0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D, + 0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D, + 0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D, + 0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD, + 0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD, + 0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED, + 0xF4, 0xF5, 0xFC, 0xFD, + }; + static const u8 snum_init_46[] = { 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, @@ -274,9 +286,15 @@ static void qe_snums_init(void) 0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59, 0x68, 0x69, 0x78, 0x79, 0x80, 0x81, }; + static const u8 *snum_init; qe_num_of_snum = qe_get_num_of_snums(); + if (qe_num_of_snum == 76) + snum_init = snum_init_76; + else + snum_init = snum_init_46; + for (i = 0; i < qe_num_of_snum; i++) { snums[i].num = snum_init[i]; snums[i].state = QE_SNUM_STATE_FREE; diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c index 49a3ece1c6b3..702256a1ca11 100644 --- a/arch/powerpc/sysdev/scom.c +++ b/arch/powerpc/sysdev/scom.c @@ -22,6 +22,7 @@ #include <linux/debugfs.h> #include <linux/slab.h> #include <linux/export.h> +#include <asm/debug.h> #include <asm/prom.h> #include <asm/scom.h> diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c index ea5e204e3450..cd1d18db92c6 100644 --- a/arch/powerpc/sysdev/xics/xics-common.c +++ b/arch/powerpc/sysdev/xics/xics-common.c @@ -188,6 +188,7 @@ void xics_migrate_irqs_away(void) { int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id(); unsigned int irq, virq; + struct irq_desc *desc; /* If we used to be the default server, move to the new "boot_cpuid" */ if (hw_cpu == xics_default_server) @@ -202,8 +203,7 @@ void xics_migrate_irqs_away(void) /* Allow IPIs again... */ icp_ops->set_priority(DEFAULT_PRIORITY); - for_each_irq(virq) { - struct irq_desc *desc; + for_each_irq_desc(virq, desc) { struct irq_chip *chip; long server; unsigned long flags; @@ -212,9 +212,8 @@ void xics_migrate_irqs_away(void) /* We can't set affinity on ISA interrupts */ if (virq < NUM_ISA_INTERRUPTS) continue; - desc = irq_to_desc(virq); /* We only need to migrate enabled IRQS */ - if (!desc || !desc->action) + if (!desc->action) continue; if (desc->irq_data.domain != xics_host) continue; |